spl: move SPL driver entries to driver/Makefile
Just preparing for upcoming cleaning.
The board-specific linker script board/vpac270/u-boot-spl.lds
has been touched to avoid build error. It does not change the
size of spl/u-boot-spl.bin for this board, so it should be OK.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/board/vpac270/u-boot-spl.lds b/board/vpac270/u-boot-spl.lds
index a10ea71..954afb9 100644
--- a/board/vpac270/u-boot-spl.lds
+++ b/board/vpac270/u-boot-spl.lds
@@ -23,7 +23,7 @@
arch/arm/cpu/pxa/start.o (.text*)
arch/arm/lib/built-in.o (.text*)
board/vpac270/built-in.o (.text*)
- drivers/mtd/onenand/built-in.o (.text*)
+ drivers/built-in.o (.text*)
}
diff --git a/drivers/Makefile b/drivers/Makefile
index 5a35148..a24c5f5 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -1,3 +1,38 @@
+ifdef CONFIG_SPL_BUILD
+
+obj-$(CONFIG_SPL_CLK_SUPPORT) += clk/
+obj-$(CONFIG_SPL_DM) += core/
+obj-$(CONFIG_SPL_I2C_SUPPORT) += i2c/
+obj-$(CONFIG_SPL_GPIO_SUPPORT) += gpio/
+obj-$(CONFIG_SPL_MMC_SUPPORT) += mmc/
+obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
+obj-$(CONFIG_SYS_MVEBU_DDR_A38X) += ddr/marvell/a38x/
+obj-$(CONFIG_SYS_MVEBU_DDR_AXP) += ddr/marvell/axp/
+obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/
+obj-$(CONFIG_SPL_SERIAL_SUPPORT) += serial/
+obj-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += mtd/spi/
+obj-$(CONFIG_SPL_SPI_SUPPORT) += spi/
+obj-$(CONFIG_SPL_LED_SUPPORT) += led/
+obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
+obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/
+obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/
+obj-$(CONFIG_SPL_NAND_SUPPORT) += mtd/nand/
+obj-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += misc/
+obj-$(CONFIG_SPL_ONENAND_SUPPORT) += mtd/onenand/
+obj-$(CONFIG_SPL_DMA_SUPPORT) += dma/
+obj-$(CONFIG_SPL_ETH_SUPPORT) += net/
+obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/
+obj-$(CONFIG_SPL_USBETH_SUPPORT) += net/phy/
+obj-$(CONFIG_SPL_RAM_SUPPORT) += ram/
+obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/
+obj-$(CONFIG_SPL_USBETH_SUPPORT) += usb/gadget/
+obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/
+obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
+obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
+obj-$(CONFIG_SPL_SATA_SUPPORT) += block/
+
+else
+
obj-$(CONFIG_CLK) += clk/
obj-$(CONFIG_DM) += core/
obj-$(CONFIG_DM_DEMO) += demo/
@@ -27,3 +62,5 @@
# SOC specific infrastructure drivers.
obj-y += soc/
obj-y += thermal/
+
+endif
diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index 239ee48..58442f1 100644
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -54,40 +54,11 @@
libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/
libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/
libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/
-libs-$(CONFIG_SPL_CLK_SUPPORT) += drivers/clk/
-libs-$(CONFIG_SPL_DM) += drivers/core/
-libs-$(CONFIG_SPL_I2C_SUPPORT) += drivers/i2c/
-libs-$(CONFIG_SPL_GPIO_SUPPORT) += drivers/gpio/
-libs-$(CONFIG_SPL_MMC_SUPPORT) += drivers/mmc/
-libs-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += drivers/ddr/fsl/
-libs-$(CONFIG_SYS_MVEBU_DDR_A38X) += drivers/ddr/marvell/a38x/
-libs-$(CONFIG_SYS_MVEBU_DDR_AXP) += drivers/ddr/marvell/axp/
-libs-$(CONFIG_ALTERA_SDRAM) += drivers/ddr/altera/
-libs-$(CONFIG_SPL_SERIAL_SUPPORT) += drivers/serial/
-libs-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += drivers/mtd/spi/
-libs-$(CONFIG_SPL_SPI_SUPPORT) += drivers/spi/
+libs-y += drivers/
libs-y += fs/
-libs-$(CONFIG_SPL_LED_SUPPORT) += drivers/led/
libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
-libs-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/ drivers/power/pmic/
-libs-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/regulator/
-libs-$(CONFIG_SPL_MTD_SUPPORT) += drivers/mtd/
-libs-$(CONFIG_SPL_NAND_SUPPORT) += drivers/mtd/nand/
-libs-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += drivers/misc/
-libs-$(CONFIG_SPL_ONENAND_SUPPORT) += drivers/mtd/onenand/
-libs-$(CONFIG_SPL_DMA_SUPPORT) += drivers/dma/
libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/
libs-$(CONFIG_SPL_NET_SUPPORT) += net/
-libs-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/
-libs-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/phy/
-libs-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/net/phy/
-libs-$(CONFIG_SPL_RAM_SUPPORT) += drivers/ram/
-libs-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += drivers/usb/musb-new/
-libs-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/
-libs-$(CONFIG_SPL_WATCHDOG_SUPPORT) += drivers/watchdog/
-libs-$(CONFIG_SPL_USB_HOST_SUPPORT) += drivers/usb/host/
-libs-$(CONFIG_OMAP_USB_PHY) += drivers/usb/phy/
-libs-$(CONFIG_SPL_SATA_SUPPORT) += drivers/block/
head-y := $(addprefix $(obj)/,$(head-y))
libs-y := $(addprefix $(obj)/,$(libs-y))