net: xilinx_enet: drop unused !NET_MULTI driver
This driver doesn't support the NET_MULTI framework, and I can't find
any boards/configs/files that reference this subdir, so punt it all.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
diff --git a/board/xilinx/xilinx_enet/emac_adapter.c b/board/xilinx/xilinx_enet/emac_adapter.c
deleted file mode 100644
index 35bcc4d..0000000
--- a/board/xilinx/xilinx_enet/emac_adapter.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/******************************************************************************
-*
-* Author: Xilinx, Inc.
-*
-*
-* This program is free software; you can redistribute it and/or modify it
-* under the terms of the GNU General Public License as published by the
-* Free Software Foundation; either version 2 of the License, or (at your
-* option) any later version.
-*
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-* FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-* Xilinx hardware products are not intended for use in life support
-* appliances, devices, or systems. Use in such applications is
-* expressly prohibited.
-*
-*
-* (c) Copyright 2002-2004 Xilinx Inc.
-* All rights reserved.
-*
-*
-* You should have received a copy of the GNU General Public License along
-* with this program; if not, write to the Free Software Foundation, Inc.,
-* 675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-
-#include <config.h>
-#include <common.h>
-#include <net.h>
-#include "xemac.h"
-
-#if defined(XPAR_EMAC_0_DEVICE_ID)
-/*
- * ENET_MAX_MTU and ENET_MAX_MTU_ALIGNED are set from
- * PKTSIZE and PKTSIZE_ALIGN (include/net.h)
- */
-
-#define ENET_MAX_MTU PKTSIZE
-#define ENET_MAX_MTU_ALIGNED PKTSIZE_ALIGN
-#define ENET_ADDR_LENGTH 6
-
-static XEmac Emac;
-static char etherrxbuff[PKTSIZE_ALIGN]; /* Receive buffer */
-
-/* hardcoded MAC address for the Xilinx EMAC Core when env is nowhere*/
-#ifdef CONFIG_ENV_IS_NOWHERE
-static u8 EMACAddr[ENET_ADDR_LENGTH] = { 0x00, 0x0a, 0x35, 0x00, 0x22, 0x01 };
-#endif
-
-static int initialized = 0;
-
-void
-eth_halt(void)
-{
- if (initialized)
- (void) XEmac_Stop(&Emac);
-}
-
-int
-eth_init(bd_t * bis)
-{
- u32 Options;
- XStatus Result;
- uchar enetaddr[6];
-
-#ifdef DEBUG
- printf("EMAC Initialization Started\n\r");
-#endif
-
- Result = XEmac_Initialize(&Emac, XPAR_EMAC_0_DEVICE_ID);
- if (Result != XST_SUCCESS) {
- return 0;
- }
-
- /* make sure the Emac is stopped before it is started */
- (void) XEmac_Stop(&Emac);
-
- if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
-#ifdef CONFIG_ENV_IS_NOWHERE
- memcpy(enetaddr, EMACAddr, 6);
- eth_setenv_enetaddr("ethaddr", enetaddr);
-#endif
- }
-
- Result = XEmac_SetMacAddress(&Emac, enetaddr);
- if (Result != XST_SUCCESS) {
- return 0;
- }
-
- Options =
- (XEM_POLLED_OPTION | XEM_UNICAST_OPTION | XEM_BROADCAST_OPTION |
- XEM_FDUPLEX_OPTION | XEM_INSERT_FCS_OPTION |
- XEM_INSERT_PAD_OPTION);
- Result = XEmac_SetOptions(&Emac, Options);
- if (Result != XST_SUCCESS) {
- return 0;
- }
-
- Result = XEmac_Start(&Emac);
- if (Result != XST_SUCCESS) {
- return 0;
- }
-#ifdef DEBUG
- printf("EMAC Initialization complete\n\r");
-#endif
-
- initialized = 1;
-
- return (0);
-}
-
-/*-----------------------------------------------------------------------------+
-+-----------------------------------------------------------------------------*/
-int
-eth_send(volatile void *ptr, int len)
-{
- XStatus Result;
-
- if (len > ENET_MAX_MTU)
- len = ENET_MAX_MTU;
-
- Result = XEmac_PollSend(&Emac, (u8 *) ptr, len);
- if (Result == XST_SUCCESS) {
- return (1);
- } else {
- printf("Error while sending frame\n\r");
- return (0);
- }
-
-}
-
-int
-eth_rx(void)
-{
- u32 RecvFrameLength;
- XStatus Result;
-
- RecvFrameLength = PKTSIZE;
- Result = XEmac_PollRecv(&Emac, (u8 *) etherrxbuff, &RecvFrameLength);
- if (Result == XST_SUCCESS) {
-#ifndef CONFIG_EMACLITE
- NetReceive((uchar *)etherrxbuff, RecvFrameLength);
-#else
- NetReceive(etherrxbuff, RecvFrameLength);
-#endif
- return (1);
- } else {
- return (0);
- }
-}
-
-#endif
diff --git a/board/xilinx/xilinx_enet/xemac.c b/board/xilinx/xilinx_enet/xemac.c
deleted file mode 100644
index 48b4ede..0000000
--- a/board/xilinx/xilinx_enet/xemac.c
+++ /dev/null
@@ -1,844 +0,0 @@
-/******************************************************************************
-*
-* Author: Xilinx, Inc.
-*
-*
-* This program is free software; you can redistribute it and/or modify it
-* under the terms of the GNU General Public License as published by the
-* Free Software Foundation; either version 2 of the License, or (at your
-* option) any later version.
-*
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-* FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-* Xilinx hardware products are not intended for use in life support
-* appliances, devices, or systems. Use in such applications is
-* expressly prohibited.
-*
-*
-* (c) Copyright 2002-2004 Xilinx Inc.
-* All rights reserved.
-*
-*
-* You should have received a copy of the GNU General Public License along
-* with this program; if not, write to the Free Software Foundation, Inc.,
-* 675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/**
-*
-* @file xemac.c
-*
-* The XEmac driver. Functions in this file are the minimum required functions
-* for this driver. See xemac.h for a detailed description of the driver.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver Who Date Changes
-* ----- ---- -------- -------------------------------------------------------
-* 1.00a rpm 07/31/01 First release
-* 1.00b rpm 02/20/02 Repartitioned files and functions
-* 1.00b rpm 07/23/02 Removed the PHY reset from Initialize()
-* 1.00b rmm 09/23/02 Removed commented code in Initialize(). Recycled as
-* XEmac_mPhyReset macro in xemac_l.h.
-* 1.00c rpm 12/05/02 New version includes support for simple DMA
-* 1.00c rpm 12/12/02 Changed location of IsStarted assignment in XEmac_Start
-* to be sure the flag is set before the device and
-* interrupts are enabled.
-* 1.00c rpm 02/03/03 SelfTest was not clearing polled mode. Take driver out
-* of polled mode in XEmac_Reset() to fix this problem.
-* 1.00c rmm 05/13/03 Fixed diab compiler warnings relating to asserts.
-* </pre>
-******************************************************************************/
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-#include "xemac_i.h"
-#include "xio.h"
-#include "xipif_v1_23_b.h" /* Uses v1.23b of the IPIF */
-
-/************************** Constant Definitions *****************************/
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Function Prototypes ******************************/
-
-static XStatus ConfigureDma(XEmac * InstancePtr);
-static XStatus ConfigureFifo(XEmac * InstancePtr);
-static void StubFifoHandler(void *CallBackRef);
-static void StubErrorHandler(void *CallBackRef, XStatus ErrorCode);
-static void StubSgHandler(void *CallBackRef, XBufDescriptor * BdPtr,
- u32 NumBds);
-
-/************************** Variable Definitions *****************************/
-
-/*****************************************************************************/
-/**
-*
-* Initialize a specific XEmac instance/driver. The initialization entails:
-* - Initialize fields of the XEmac structure
-* - Clear the Ethernet statistics for this device
-* - Initialize the IPIF component with its register base address
-* - Configure the FIFO components with their register base addresses.
-* - If the device is configured with DMA, configure the DMA channel components
-* with their register base addresses. At some later time, memory pools for
-* the scatter-gather descriptor lists may be passed to the driver.
-* - Reset the Ethernet MAC
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param DeviceId is the unique id of the device controlled by this XEmac
-* instance. Passing in a device id associates the generic XEmac
-* instance to a specific device, as chosen by the caller or application
-* developer.
-*
-* @return
-*
-* - XST_SUCCESS if initialization was successful
-* - XST_DEVICE_IS_STARTED if the device has already been started
-* - XST_DEVICE_NOT_FOUND if device configuration information was not found for
-* a device with the supplied device ID.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XEmac_Initialize(XEmac * InstancePtr, u16 DeviceId)
-{
- XStatus Result;
- XEmac_Config *ConfigPtr; /* configuration information */
-
- XASSERT_NONVOID(InstancePtr != NULL);
-
- /*
- * If the device is started, disallow the initialize and return a status
- * indicating it is started. This allows the user to stop the device
- * and reinitialize, but prevents a user from inadvertently initializing
- */
- if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) {
- return XST_DEVICE_IS_STARTED;
- }
-
- /*
- * Lookup the device configuration in the temporary CROM table. Use this
- * configuration info down below when initializing this component.
- */
- ConfigPtr = XEmac_LookupConfig(DeviceId);
- if (ConfigPtr == NULL) {
- return XST_DEVICE_NOT_FOUND;
- }
-
- /*
- * Set some default values
- */
- InstancePtr->IsReady = 0;
- InstancePtr->IsStarted = 0;
- InstancePtr->IpIfDmaConfig = ConfigPtr->IpIfDmaConfig;
- InstancePtr->HasMii = ConfigPtr->HasMii;
- InstancePtr->HasMulticastHash = FALSE;
-
- /* Always default polled to false, let user configure this mode */
- InstancePtr->IsPolled = FALSE;
- InstancePtr->FifoRecvHandler = StubFifoHandler;
- InstancePtr->FifoSendHandler = StubFifoHandler;
- InstancePtr->ErrorHandler = StubErrorHandler;
- InstancePtr->SgRecvHandler = StubSgHandler;
- InstancePtr->SgSendHandler = StubSgHandler;
-
- /*
- * Clear the statistics for this driver
- */
- XEmac_mClearStruct((u8 *) & InstancePtr->Stats, sizeof (XEmac_Stats));
-
- /*
- * Initialize the device register base addresses
- */
- InstancePtr->BaseAddress = ConfigPtr->BaseAddress;
-
- /*
- * Configure the send and receive FIFOs in the MAC
- */
- Result = ConfigureFifo(InstancePtr);
- if (Result != XST_SUCCESS) {
- return Result;
- }
-
- /*
- * If the device is configured for DMA, configure the send and receive DMA
- * channels in the MAC.
- */
- if (XEmac_mIsDma(InstancePtr)) {
- Result = ConfigureDma(InstancePtr);
- if (Result != XST_SUCCESS) {
- return Result;
- }
- }
-
- /*
- * Indicate the component is now ready to use. Note that this is done before
- * we reset the device and the PHY below, which may seem a bit odd. The
- * choice was made to move it here rather than remove the asserts in various
- * functions (e.g., Reset() and all functions that it calls). Applications
- * that use multiple threads, one to initialize the XEmac driver and one
- * waiting on the IsReady condition could have a problem with this sequence.
- */
- InstancePtr->IsReady = XCOMPONENT_IS_READY;
-
- /*
- * Reset the MAC to get it into its initial state. It is expected that
- * device configuration by the user will take place after this
- * initialization is done, but before the device is started.
- */
- XEmac_Reset(InstancePtr);
-
- return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/**
-*
-* Start the Ethernet controller as follows:
-* - If not in polled mode
-* - Set the internal interrupt enable registers appropriately
-* - Enable interrupts within the device itself. Note that connection of
-* the driver's interrupt handler to the interrupt source (typically
-* done using the interrupt controller component) is done by the higher
-* layer software.
-* - If the device is configured with scatter-gather DMA, start the DMA
-* channels if the descriptor lists are not empty
-* - Enable the transmitter
-* - Enable the receiver
-*
-* The PHY is enabled after driver initialization. We assume the upper layer
-* software has configured it and the EMAC appropriately before this function
-* is called.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-*
-* @return
-*
-* - XST_SUCCESS if the device was started successfully
-* - XST_NO_CALLBACK if a callback function has not yet been registered using
-* the SetxxxHandler function. This is required if in interrupt mode.
-* - XST_DEVICE_IS_STARTED if the device is already started
-* - XST_DMA_SG_NO_LIST if configured for scatter-gather DMA and a descriptor
-* list has not yet been created for the send or receive channel.
-*
-* @note
-*
-* The driver tries to match the hardware configuration. So if the hardware
-* is configured with scatter-gather DMA, the driver expects to start the
-* scatter-gather channels and expects that the user has set up the buffer
-* descriptor lists already. If the user expects to use the driver in a mode
-* different than how the hardware is configured, the user should modify the
-* configuration table to reflect the mode to be used. Modifying the config
-* table is a workaround for now until we get some experience with how users
-* are intending to use the hardware in its different configurations. For
-* example, if the hardware is built with scatter-gather DMA but the user is
-* intending to use only simple DMA, the user either needs to modify the config
-* table as a workaround or rebuild the hardware with only simple DMA.
-*
-* This function makes use of internal resources that are shared between the
-* Start, Stop, and SetOptions functions. So if one task might be setting device
-* options while another is trying to start the device, the user is required to
-* provide protection of this shared data (typically using a semaphore).
-*
-******************************************************************************/
-XStatus
-XEmac_Start(XEmac * InstancePtr)
-{
- u32 ControlReg;
- XStatus Result;
-
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /*
- * If it is already started, return a status indicating so
- */
- if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) {
- return XST_DEVICE_IS_STARTED;
- }
-
- /*
- * If not polled, enable interrupts
- */
- if (!InstancePtr->IsPolled) {
- /*
- * Verify that the callbacks have been registered, then enable
- * interrupts
- */
- if (XEmac_mIsSgDma(InstancePtr)) {
- if ((InstancePtr->SgRecvHandler == StubSgHandler) ||
- (InstancePtr->SgSendHandler == StubSgHandler)) {
- return XST_NO_CALLBACK;
- }
-
- /* Enable IPIF interrupts */
- XIIF_V123B_WRITE_DIER(InstancePtr->BaseAddress,
- XEM_IPIF_DMA_DFT_MASK |
- XIIF_V123B_ERROR_MASK);
- XIIF_V123B_WRITE_IIER(InstancePtr->BaseAddress,
- XEM_EIR_DFT_SG_MASK);
-
- /* Enable scatter-gather DMA interrupts */
- XDmaChannel_SetIntrEnable(&InstancePtr->RecvChannel,
- XEM_DMA_SG_INTR_MASK);
- XDmaChannel_SetIntrEnable(&InstancePtr->SendChannel,
- XEM_DMA_SG_INTR_MASK);
- } else {
- if ((InstancePtr->FifoRecvHandler == StubFifoHandler) ||
- (InstancePtr->FifoSendHandler == StubFifoHandler)) {
- return XST_NO_CALLBACK;
- }
-
- /* Enable IPIF interrupts (used by simple DMA also) */
- XIIF_V123B_WRITE_DIER(InstancePtr->BaseAddress,
- XEM_IPIF_FIFO_DFT_MASK |
- XIIF_V123B_ERROR_MASK);
- XIIF_V123B_WRITE_IIER(InstancePtr->BaseAddress,
- XEM_EIR_DFT_FIFO_MASK);
- }
-
- /* Enable the global IPIF interrupt output */
- XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
- }
-
- /*
- * Indicate that the device is started before we enable the transmitter
- * or receiver. This needs to be done before because as soon as the
- * receiver is enabled we may get an interrupt, and there are functions
- * in the interrupt handling path that rely on the IsStarted flag.
- */
- InstancePtr->IsStarted = XCOMPONENT_IS_STARTED;
-
- /*
- * Enable the transmitter, and receiver (do a read/modify/write to preserve
- * current settings). There is no critical section here since this register
- * is not modified during interrupt context.
- */
- ControlReg = XIo_In32(InstancePtr->BaseAddress + XEM_ECR_OFFSET);
- ControlReg &= ~(XEM_ECR_XMIT_RESET_MASK | XEM_ECR_RECV_RESET_MASK);
- ControlReg |= (XEM_ECR_XMIT_ENABLE_MASK | XEM_ECR_RECV_ENABLE_MASK);
-
- XIo_Out32(InstancePtr->BaseAddress + XEM_ECR_OFFSET, ControlReg);
-
- /*
- * If configured with scatter-gather DMA and not polled, restart the
- * DMA channels in case there are buffers ready to be sent or received into.
- * The DMA SgStart function uses data that can be modified during interrupt
- * context, so a critical section is required here.
- */
- if ((XEmac_mIsSgDma(InstancePtr)) && (!InstancePtr->IsPolled)) {
- XIIF_V123B_GINTR_DISABLE(InstancePtr->BaseAddress);
-
- /*
- * The only error we care about is if the list has not yet been
- * created, or on receive, if no buffer descriptors have been
- * added yet (the list is empty). Other errors are benign at this point.
- */
- Result = XDmaChannel_SgStart(&InstancePtr->RecvChannel);
- if ((Result == XST_DMA_SG_NO_LIST)
- || (Result == XST_DMA_SG_LIST_EMPTY)) {
- XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
- return Result;
- }
-
- Result = XDmaChannel_SgStart(&InstancePtr->SendChannel);
- if (Result == XST_DMA_SG_NO_LIST) {
- XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
- return Result;
- }
-
- XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
- }
-
- return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/**
-*
-* Stop the Ethernet MAC as follows:
-* - If the device is configured with scatter-gather DMA, stop the DMA
-* channels (wait for acknowledgment of stop)
-* - Disable the transmitter and receiver
-* - Disable interrupts if not in polled mode (the higher layer software is
-* responsible for disabling interrupts at the interrupt controller)
-*
-* The PHY is left enabled after a Stop is called.
-*
-* If the device is configured for scatter-gather DMA, the DMA engine stops at
-* the next buffer descriptor in its list. The remaining descriptors in the list
-* are not removed, so anything in the list will be transmitted or received when
-* the device is restarted. The side effect of doing this is that the last
-* buffer descriptor processed by the DMA engine before stopping may not be the
-* last descriptor in the Ethernet frame. So when the device is restarted, a
-* partial frame (i.e., a bad frame) may be transmitted/received. This is only a
-* concern if a frame can span multiple buffer descriptors, which is dependent
-* on the size of the network buffers.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-*
-* @return
-*
-* - XST_SUCCESS if the device was stopped successfully
-* - XST_DEVICE_IS_STOPPED if the device is already stopped
-*
-* @note
-*
-* This function makes use of internal resources that are shared between the
-* Start, Stop, and SetOptions functions. So if one task might be setting device
-* options while another is trying to start the device, the user is required to
-* provide protection of this shared data (typically using a semaphore).
-*
-******************************************************************************/
-XStatus
-XEmac_Stop(XEmac * InstancePtr)
-{
- u32 ControlReg;
-
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /*
- * If the device is already stopped, do nothing but return a status
- * indicating so
- */
- if (InstancePtr->IsStarted != XCOMPONENT_IS_STARTED) {
- return XST_DEVICE_IS_STOPPED;
- }
-
- /*
- * If configured for scatter-gather DMA, stop the DMA channels. Ignore
- * the XST_DMA_SG_IS_STOPPED return code. There is a critical section
- * here between SgStart and SgStop, and SgStart can be called in interrupt
- * context, so disable interrupts while calling SgStop.
- */
- if (XEmac_mIsSgDma(InstancePtr)) {
- XBufDescriptor *BdTemp; /* temporary descriptor pointer */
-
- XIIF_V123B_GINTR_DISABLE(InstancePtr->BaseAddress);
-
- (void) XDmaChannel_SgStop(&InstancePtr->SendChannel, &BdTemp);
- (void) XDmaChannel_SgStop(&InstancePtr->RecvChannel, &BdTemp);
-
- XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
- }
-
- /*
- * Disable the transmitter and receiver. There is no critical section
- * here since this register is not modified during interrupt context.
- */
- ControlReg = XIo_In32(InstancePtr->BaseAddress + XEM_ECR_OFFSET);
- ControlReg &= ~(XEM_ECR_XMIT_ENABLE_MASK | XEM_ECR_RECV_ENABLE_MASK);
- XIo_Out32(InstancePtr->BaseAddress + XEM_ECR_OFFSET, ControlReg);
-
- /*
- * If not in polled mode, disable interrupts for IPIF (includes MAC and
- * DMAs)
- */
- if (!InstancePtr->IsPolled) {
- XIIF_V123B_GINTR_DISABLE(InstancePtr->BaseAddress);
- }
-
- InstancePtr->IsStarted = 0;
-
- return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/**
-*
-* Reset the Ethernet MAC. This is a graceful reset in that the device is stopped
-* first. Resets the DMA channels, the FIFOs, the transmitter, and the receiver.
-* The PHY is not reset. Any frames in the scatter-gather descriptor lists will
-* remain in the lists. The side effect of doing this is that after a reset and
-* following a restart of the device, frames that were in the list before the
-* reset may be transmitted or received. Reset must only be called after the
-* driver has been initialized.
-*
-* The driver is also taken out of polled mode if polled mode was set. The user
-* is responsbile for re-configuring the driver into polled mode after the
-* reset if desired.
-*
-* The configuration after this reset is as follows:
-* - Half duplex
-* - Disabled transmitter and receiver
-* - Enabled PHY (the PHY is not reset)
-* - MAC transmitter does pad insertion, FCS insertion, and source address
-* overwrite.
-* - MAC receiver does not strip padding or FCS
-* - Interframe Gap as recommended by IEEE Std. 802.3 (96 bit times)
-* - Unicast addressing enabled
-* - Broadcast addressing enabled
-* - Multicast addressing disabled (addresses are preserved)
-* - Promiscuous addressing disabled
-* - Default packet threshold and packet wait bound register values for
-* scatter-gather DMA operation
-* - MAC address of all zeros
-* - Non-polled mode
-*
-* The upper layer software is responsible for re-configuring (if necessary)
-* and restarting the MAC after the reset. Note that the PHY is not reset. PHY
-* control is left to the upper layer software. Note also that driver statistics
-* are not cleared on reset. It is up to the upper layer software to clear the
-* statistics if needed.
-*
-* When a reset is required due to an internal error, the driver notifies the
-* upper layer software of this need through the ErrorHandler callback and
-* specific status codes. The upper layer software is responsible for calling
-* this Reset function and then re-configuring the device.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* None.
-*
-* @internal
-*
-* The reset is accomplished by setting the IPIF reset register. This takes
-* care of resetting all hardware blocks, including the MAC.
-*
-******************************************************************************/
-void
-XEmac_Reset(XEmac * InstancePtr)
-{
- XASSERT_VOID(InstancePtr != NULL);
- XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /*
- * Stop the device first
- */
- (void) XEmac_Stop(InstancePtr);
-
- /*
- * Take the driver out of polled mode
- */
- InstancePtr->IsPolled = FALSE;
-
- /*
- * Reset the entire IPIF at once. If we choose someday to reset each
- * hardware block separately, the reset should occur in the direction of
- * data flow. For example, for the send direction the reset order is DMA
- * first, then FIFO, then the MAC transmitter.
- */
- XIIF_V123B_RESET(InstancePtr->BaseAddress);
-
- if (XEmac_mIsSgDma(InstancePtr)) {
- /*
- * After reset, configure the scatter-gather DMA packet threshold and
- * packet wait bound registers to default values. Ignore the return
- * values of these functions since they only return error if the device
- * is not stopped.
- */
- (void) XEmac_SetPktThreshold(InstancePtr, XEM_SEND,
- XEM_SGDMA_DFT_THRESHOLD);
- (void) XEmac_SetPktThreshold(InstancePtr, XEM_RECV,
- XEM_SGDMA_DFT_THRESHOLD);
- (void) XEmac_SetPktWaitBound(InstancePtr, XEM_SEND,
- XEM_SGDMA_DFT_WAITBOUND);
- (void) XEmac_SetPktWaitBound(InstancePtr, XEM_RECV,
- XEM_SGDMA_DFT_WAITBOUND);
- }
-}
-
-/*****************************************************************************/
-/**
-*
-* Set the MAC address for this driver/device. The address is a 48-bit value.
-* The device must be stopped before calling this function.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param AddressPtr is a pointer to a 6-byte MAC address.
-*
-* @return
-*
-* - XST_SUCCESS if the MAC address was set successfully
-* - XST_DEVICE_IS_STARTED if the device has not yet been stopped
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XEmac_SetMacAddress(XEmac * InstancePtr, u8 * AddressPtr)
-{
- u32 MacAddr = 0;
-
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(AddressPtr != NULL);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /*
- * The device must be stopped before setting the MAC address
- */
- if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) {
- return XST_DEVICE_IS_STARTED;
- }
-
- /*
- * Set the device station address high and low registers
- */
- MacAddr = (AddressPtr[0] << 8) | AddressPtr[1];
- XIo_Out32(InstancePtr->BaseAddress + XEM_SAH_OFFSET, MacAddr);
-
- MacAddr = (AddressPtr[2] << 24) | (AddressPtr[3] << 16) |
- (AddressPtr[4] << 8) | AddressPtr[5];
-
- XIo_Out32(InstancePtr->BaseAddress + XEM_SAL_OFFSET, MacAddr);
-
- return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/**
-*
-* Get the MAC address for this driver/device.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param BufferPtr is an output parameter, and is a pointer to a buffer into
-* which the current MAC address will be copied. The buffer must be at
-* least 6 bytes.
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-void
-XEmac_GetMacAddress(XEmac * InstancePtr, u8 * BufferPtr)
-{
- u32 MacAddrHi;
- u32 MacAddrLo;
-
- XASSERT_VOID(InstancePtr != NULL);
- XASSERT_VOID(BufferPtr != NULL);
- XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- MacAddrHi = XIo_In32(InstancePtr->BaseAddress + XEM_SAH_OFFSET);
- MacAddrLo = XIo_In32(InstancePtr->BaseAddress + XEM_SAL_OFFSET);
-
- BufferPtr[0] = (u8) (MacAddrHi >> 8);
- BufferPtr[1] = (u8) MacAddrHi;
- BufferPtr[2] = (u8) (MacAddrLo >> 24);
- BufferPtr[3] = (u8) (MacAddrLo >> 16);
- BufferPtr[4] = (u8) (MacAddrLo >> 8);
- BufferPtr[5] = (u8) MacAddrLo;
-}
-
-/******************************************************************************/
-/**
-*
-* Configure DMA capabilities.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-*
-* @return
-*
-* - XST_SUCCESS if successful initialization of DMA
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-static XStatus
-ConfigureDma(XEmac * InstancePtr)
-{
- XStatus Result;
-
- /*
- * Initialize the DMA channels with their base addresses. We assume
- * scatter-gather DMA is the only possible configuration. Descriptor space
- * will need to be set later by the upper layer.
- */
- Result = XDmaChannel_Initialize(&InstancePtr->RecvChannel,
- InstancePtr->BaseAddress +
- XEM_DMA_RECV_OFFSET);
- if (Result != XST_SUCCESS) {
- return Result;
- }
-
- Result = XDmaChannel_Initialize(&InstancePtr->SendChannel,
- InstancePtr->BaseAddress +
- XEM_DMA_SEND_OFFSET);
-
- return Result;
-}
-
-/******************************************************************************/
-/**
-*
-* Configure the send and receive FIFO components with their base addresses
-* and interrupt masks. Currently the base addresses are defined constants.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-*
-* @return
-*
-* XST_SUCCESS if successful initialization of the packet FIFOs
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-static XStatus
-ConfigureFifo(XEmac * InstancePtr)
-{
- XStatus Result;
-
- /*
- * Return status from the packet FIFOs initialization is ignored since
- * they always return success.
- */
- Result = XPacketFifoV100b_Initialize(&InstancePtr->RecvFifo,
- InstancePtr->BaseAddress +
- XEM_PFIFO_RXREG_OFFSET,
- InstancePtr->BaseAddress +
- XEM_PFIFO_RXDATA_OFFSET);
- if (Result != XST_SUCCESS) {
- return Result;
- }
-
- Result = XPacketFifoV100b_Initialize(&InstancePtr->SendFifo,
- InstancePtr->BaseAddress +
- XEM_PFIFO_TXREG_OFFSET,
- InstancePtr->BaseAddress +
- XEM_PFIFO_TXDATA_OFFSET);
- return Result;
-}
-
-/******************************************************************************/
-/**
-*
-* This is a stub for the scatter-gather send and recv callbacks. The stub
-* is here in case the upper layers forget to set the handlers.
-*
-* @param CallBackRef is a pointer to the upper layer callback reference
-* @param BdPtr is a pointer to the first buffer descriptor in a list
-* @param NumBds is the number of descriptors in the list.
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-static void
-StubSgHandler(void *CallBackRef, XBufDescriptor * BdPtr, u32 NumBds)
-{
- XASSERT_VOID_ALWAYS();
-}
-
-/******************************************************************************/
-/**
-*
-* This is a stub for the non-DMA send and recv callbacks. The stub is here in
-* case the upper layers forget to set the handlers.
-*
-* @param CallBackRef is a pointer to the upper layer callback reference
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-static void
-StubFifoHandler(void *CallBackRef)
-{
- XASSERT_VOID_ALWAYS();
-}
-
-/******************************************************************************/
-/**
-*
-* This is a stub for the asynchronous error callback. The stub is here in
-* case the upper layers forget to set the handler.
-*
-* @param CallBackRef is a pointer to the upper layer callback reference
-* @param ErrorCode is the Xilinx error code, indicating the cause of the error
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-static void
-StubErrorHandler(void *CallBackRef, XStatus ErrorCode)
-{
- XASSERT_VOID_ALWAYS();
-}
-
-/*****************************************************************************/
-/**
-*
-* Lookup the device configuration based on the unique device ID. The table
-* EmacConfigTable contains the configuration info for each device in the system.
-*
-* @param DeviceId is the unique device ID of the device being looked up.
-*
-* @return
-*
-* A pointer to the configuration table entry corresponding to the given
-* device ID, or NULL if no match is found.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-XEmac_Config *
-XEmac_LookupConfig(u16 DeviceId)
-{
- XEmac_Config *CfgPtr = NULL;
- int i;
-
- for (i = 0; i < XPAR_XEMAC_NUM_INSTANCES; i++) {
- if (XEmac_ConfigTable[i].DeviceId == DeviceId) {
- CfgPtr = &XEmac_ConfigTable[i];
- break;
- }
- }
-
- return CfgPtr;
-}
diff --git a/board/xilinx/xilinx_enet/xemac.h b/board/xilinx/xilinx_enet/xemac.h
deleted file mode 100644
index 584cb7a..0000000
--- a/board/xilinx/xilinx_enet/xemac.h
+++ /dev/null
@@ -1,673 +0,0 @@
-/******************************************************************************
-*
-* Author: Xilinx, Inc.
-*
-*
-* This program is free software; you can redistribute it and/or modify it
-* under the terms of the GNU General Public License as published by the
-* Free Software Foundation; either version 2 of the License, or (at your
-* option) any later version.
-*
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-* FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-* Xilinx hardware products are not intended for use in life support
-* appliances, devices, or systems. Use in such applications is
-* expressly prohibited.
-*
-*
-* (c) Copyright 2002-2004 Xilinx Inc.
-* All rights reserved.
-*
-*
-* You should have received a copy of the GNU General Public License along
-* with this program; if not, write to the Free Software Foundation, Inc.,
-* 675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/**
-*
-* @file xemac.h
-*
-* The Xilinx Ethernet driver component. This component supports the Xilinx
-* Ethernet 10/100 MAC (EMAC).
-*
-* The Xilinx Ethernet 10/100 MAC supports the following features:
-* - Simple and scatter-gather DMA operations, as well as simple memory
-* mapped direct I/O interface (FIFOs).
-* - Media Independent Interface (MII) for connection to external
-* 10/100 Mbps PHY transceivers.
-* - MII management control reads and writes with MII PHYs
-* - Independent internal transmit and receive FIFOs
-* - CSMA/CD compliant operations for half-duplex modes
-* - Programmable PHY reset signal
-* - Unicast, broadcast, and promiscuous address filtering (no multicast yet)
-* - Internal loopback
-* - Automatic source address insertion or overwrite (programmable)
-* - Automatic FCS insertion and stripping (programmable)
-* - Automatic pad insertion and stripping (programmable)
-* - Pause frame (flow control) detection in full-duplex mode
-* - Programmable interframe gap
-* - VLAN frame support.
-* - Pause frame support
-*
-* The device driver supports all the features listed above.
-*
-* <b>Driver Description</b>
-*
-* The device driver enables higher layer software (e.g., an application) to
-* communicate to the EMAC. The driver handles transmission and reception of
-* Ethernet frames, as well as configuration of the controller. It does not
-* handle protocol stack functionality such as Link Layer Control (LLC) or the
-* Address Resolution Protocol (ARP). The protocol stack that makes use of the
-* driver handles this functionality. This implies that the driver is simply a
-* pass-through mechanism between a protocol stack and the EMAC. A single device
-* driver can support multiple EMACs.
-*
-* The driver is designed for a zero-copy buffer scheme. That is, the driver will
-* not copy buffers. This avoids potential throughput bottlenecks within the
-* driver.
-*
-* Since the driver is a simple pass-through mechanism between a protocol stack
-* and the EMAC, no assembly or disassembly of Ethernet frames is done at the
-* driver-level. This assumes that the protocol stack passes a correctly
-* formatted Ethernet frame to the driver for transmission, and that the driver
-* does not validate the contents of an incoming frame
-*
-* <b>PHY Communication</b>
-*
-* The driver provides rudimentary read and write functions to allow the higher
-* layer software to access the PHY. The EMAC provides MII registers for the
-* driver to access. This management interface can be parameterized away in the
-* FPGA implementation process. If this is the case, the PHY read and write
-* functions of the driver return XST_NO_FEATURE.
-*
-* External loopback is usually supported at the PHY. It is up to the user to
-* turn external loopback on or off at the PHY. The driver simply provides pass-
-* through functions for configuring the PHY. The driver does not read, write,
-* or reset the PHY on its own. All control of the PHY must be done by the user.
-*
-* <b>Asynchronous Callbacks</b>
-*
-* The driver services interrupts and passes Ethernet frames to the higher layer
-* software through asynchronous callback functions. When using the driver
-* directly (i.e., not with the RTOS protocol stack), the higher layer
-* software must register its callback functions during initialization. The
-* driver requires callback functions for received frames, for confirmation of
-* transmitted frames, and for asynchronous errors.
-*
-* <b>Interrupts</b>
-*
-* The driver has no dependencies on the interrupt controller. The driver
-* provides two interrupt handlers. XEmac_IntrHandlerDma() handles interrupts
-* when the EMAC is configured with scatter-gather DMA. XEmac_IntrHandlerFifo()
-* handles interrupts when the EMAC is configured for direct FIFO I/O or simple
-* DMA. Either of these routines can be connected to the system interrupt
-* controller by the user.
-*
-* <b>Interrupt Frequency</b>
-*
-* When the EMAC is configured with scatter-gather DMA, the frequency of
-* interrupts can be controlled with the interrupt coalescing features of the
-* scatter-gather DMA engine. The frequency of interrupts can be adjusted using
-* the driver API functions for setting the packet count threshold and the packet
-* wait bound values.
-*
-* The scatter-gather DMA engine only interrupts when the packet count threshold
-* is reached, instead of interrupting for each packet. A packet is a generic
-* term used by the scatter-gather DMA engine, and is equivalent to an Ethernet
-* frame in our case.
-*
-* The packet wait bound is a timer value used during interrupt coalescing to
-* trigger an interrupt when not enough packets have been received to reach the
-* packet count threshold.
-*
-* These values can be tuned by the user to meet their needs. If there appear to
-* be interrupt latency problems or delays in packet arrival that are longer than
-* might be expected, the user should verify that the packet count threshold is
-* set low enough to receive interrupts before the wait bound timer goes off.
-*
-* <b>Device Reset</b>
-*
-* Some errors that can occur in the device require a device reset. These errors
-* are listed in the XEmac_SetErrorHandler() function header. The user's error
-* handler is responsible for resetting the device and re-configuring it based on
-* its needs (the driver does not save the current configuration). When
-* integrating into an RTOS, these reset and re-configure obligations are
-* taken care of by the Xilinx adapter software if it exists for that RTOS.
-*
-* <b>Device Configuration</b>
-*
-* The device can be configured in various ways during the FPGA implementation
-* process. Configuration parameters are stored in the xemac_g.c files.
-* A table is defined where each entry contains configuration information
-* for an EMAC device. This information includes such things as the base address
-* of the memory-mapped device, the base addresses of IPIF, DMA, and FIFO modules
-* within the device, and whether the device has DMA, counter registers,
-* multicast support, MII support, and flow control.
-*
-* The driver tries to use the features built into the device. So if, for
-* example, the hardware is configured with scatter-gather DMA, the driver
-* expects to start the scatter-gather channels and expects that the user has set
-* up the buffer descriptor lists already. If the user expects to use the driver
-* in a mode different than how the hardware is configured, the user should
-* modify the configuration table to reflect the mode to be used. Modifying the
-* configuration table is a workaround for now until we get some experience with
-* how users are intending to use the hardware in its different configurations.
-* For example, if the hardware is built with scatter-gather DMA but the user is
-* intending to use only simple DMA, the user either needs to modify the config
-* table as a workaround or rebuild the hardware with only simple DMA. The
-* recommendation at this point is to build the hardware with the features you
-* intend to use. If you're inclined to modify the table, do so before the call
-* to XEmac_Initialize(). Here is a snippet of code that changes a device to
-* simple DMA (the hardware needs to have DMA for this to work of course):
-* <pre>
-* XEmac_Config *ConfigPtr;
-*
-* ConfigPtr = XEmac_LookupConfig(DeviceId);
-* ConfigPtr->IpIfDmaConfig = XEM_CFG_SIMPLE_DMA;
-* </pre>
-*
-* <b>Simple DMA</b>
-*
-* Simple DMA is supported through the FIFO functions, FifoSend and FifoRecv, of
-* the driver (i.e., there is no separate interface for it). The driver makes use
-* of the DMA engine for a simple DMA transfer if the device is configured with
-* DMA, otherwise it uses the FIFOs directly. While the simple DMA interface is
-* therefore transparent to the user, the caching of network buffers is not.
-* If the device is configured with DMA and the FIFO interface is used, the user
-* must ensure that the network buffers are not cached or are cache coherent,
-* since DMA will be used to transfer to and from the Emac device. If the device
-* is configured with DMA and the user really wants to use the FIFOs directly,
-* the user should rebuild the hardware without DMA. If unable to do this, there
-* is a workaround (described above in Device Configuration) to modify the
-* configuration table of the driver to fake the driver into thinking the device
-* has no DMA. A code snippet follows:
-* <pre>
-* XEmac_Config *ConfigPtr;
-*
-* ConfigPtr = XEmac_LookupConfig(DeviceId);
-* ConfigPtr->IpIfDmaConfig = XEM_CFG_NO_DMA;
-* </pre>
-*
-* <b>Asserts</b>
-*
-* Asserts are used within all Xilinx drivers to enforce constraints on argument
-* values. Asserts can be turned off on a system-wide basis by defining, at
-* compile time, the NDEBUG identifier. By default, asserts are turned on and it
-* is recommended that users leave asserts on during development.
-*
-* <b>Building the driver</b>
-*
-* The XEmac driver is composed of several source files. Why so many? This
-* allows the user to build and link only those parts of the driver that are
-* necessary. Since the EMAC hardware can be configured in various ways (e.g.,
-* with or without DMA), the driver too can be built with varying features.
-* For the most part, this means that besides always linking in xemac.c, you
-* link in only the driver functionality you want. Some of the choices you have
-* are polled vs. interrupt, interrupt with FIFOs only vs. interrupt with DMA,
-* self-test diagnostics, and driver statistics. Note that currently the DMA code
-* must be linked in, even if you don't have DMA in the device.
-*
-* @note
-*
-* Xilinx drivers are typically composed of two components, one is the driver
-* and the other is the adapter. The driver is independent of OS and processor
-* and is intended to be highly portable. The adapter is OS-specific and
-* facilitates communication between the driver and an OS.
-* <br><br>
-* This driver is intended to be RTOS and processor independent. It works
-* with physical addresses only. Any needs for dynamic memory management,
-* threads or thread mutual exclusion, virtual memory, or cache control must
-* be satisfied by the layer above this driver.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver Who Date Changes
-* ----- ---- -------- -------------------------------------------------------
-* 1.00a rpm 07/31/01 First release
-* 1.00b rpm 02/20/02 Repartitioned files and functions
-* 1.00b rpm 10/08/02 Replaced HasSgDma boolean with IpifDmaConfig enumerated
-* configuration parameter
-* 1.00c rpm 12/05/02 New version includes support for simple DMA and the delay
-* argument to SgSend
-* 1.00c rpm 02/03/03 The XST_DMA_SG_COUNT_EXCEEDED return code was removed
-* from SetPktThreshold in the internal DMA driver. Also
-* avoided compiler warnings by initializing Result in the
-* DMA interrupt service routines.
-* </pre>
-*
-******************************************************************************/
-
-#ifndef XEMAC_H /* prevent circular inclusions */
-#define XEMAC_H /* by using protection macros */
-
-/***************************** Include Files *********************************/
-
-#include <config.h>
-#include "xbasic_types.h"
-#include "xstatus.h"
-#include "xpacket_fifo_v1_00_b.h" /* Uses v1.00b of Packet Fifo */
-#include "xdma_channel.h"
-
-/************************** Constant Definitions *****************************/
-
-/*
- * Device information
- */
-#define XEM_DEVICE_NAME "xemac"
-#define XEM_DEVICE_DESC "Xilinx Ethernet 10/100 MAC"
-
-/** @name Configuration options
- *
- * Device configuration options (see the XEmac_SetOptions() and
- * XEmac_GetOptions() for information on how to use these options)
- * @{
- */
-/**
- * <pre>
- * XEM_BROADCAST_OPTION Broadcast addressing on or off (default is on)
- * XEM_UNICAST_OPTION Unicast addressing on or off (default is on)
- * XEM_PROMISC_OPTION Promiscuous addressing on or off (default is off)
- * XEM_FDUPLEX_OPTION Full duplex on or off (default is off)
- * XEM_POLLED_OPTION Polled mode on or off (default is off)
- * XEM_LOOPBACK_OPTION Internal loopback on or off (default is off)
- * XEM_FLOW_CONTROL_OPTION Interpret pause frames in full duplex mode
- * (default is off)
- * XEM_INSERT_PAD_OPTION Pad short frames on transmit (default is on)
- * XEM_INSERT_FCS_OPTION Insert FCS (CRC) on transmit (default is on)
- * XEM_INSERT_ADDR_OPTION Insert source address on transmit (default is on)
- * XEM_OVWRT_ADDR_OPTION Overwrite source address on transmit. This is
- * only used if source address insertion is on.
- * (default is on)
- * XEM_STRIP_PAD_FCS_OPTION Strip FCS and padding from received frames
- * (default is off)
- * </pre>
- */
-#define XEM_UNICAST_OPTION 0x00000001UL
-#define XEM_BROADCAST_OPTION 0x00000002UL
-#define XEM_PROMISC_OPTION 0x00000004UL
-#define XEM_FDUPLEX_OPTION 0x00000008UL
-#define XEM_POLLED_OPTION 0x00000010UL
-#define XEM_LOOPBACK_OPTION 0x00000020UL
-#define XEM_FLOW_CONTROL_OPTION 0x00000080UL
-#define XEM_INSERT_PAD_OPTION 0x00000100UL
-#define XEM_INSERT_FCS_OPTION 0x00000200UL
-#define XEM_INSERT_ADDR_OPTION 0x00000400UL
-#define XEM_OVWRT_ADDR_OPTION 0x00000800UL
-#define XEM_STRIP_PAD_FCS_OPTION 0x00002000UL
-/*@}*/
-/*
- * Not supported yet:
- * XEM_MULTICAST_OPTION Multicast addressing on or off (default is off)
- */
-/* NOT SUPPORTED YET... */
-#define XEM_MULTICAST_OPTION 0x00000040UL
-
-/*
- * Some default values for interrupt coalescing within the scatter-gather
- * DMA engine.
- */
-#define XEM_SGDMA_DFT_THRESHOLD 1 /* Default pkt threshold */
-#define XEM_SGDMA_MAX_THRESHOLD 255 /* Maximum pkt theshold */
-#define XEM_SGDMA_DFT_WAITBOUND 5 /* Default pkt wait bound (msec) */
-#define XEM_SGDMA_MAX_WAITBOUND 1023 /* Maximum pkt wait bound (msec) */
-
-/*
- * Direction identifiers. These are used for setting values like packet
- * thresholds and wait bound for specific channels
- */
-#define XEM_SEND 1
-#define XEM_RECV 2
-
-/*
- * Arguments to SgSend function to indicate whether to hold off starting
- * the scatter-gather engine.
- */
-#define XEM_SGDMA_NODELAY 0 /* start SG DMA immediately */
-#define XEM_SGDMA_DELAY 1 /* do not start SG DMA */
-
-/*
- * Constants to determine the configuration of the hardware device. They are
- * used to allow the driver to verify it can operate with the hardware.
- */
-#define XEM_CFG_NO_IPIF 0 /* Not supported by the driver */
-#define XEM_CFG_NO_DMA 1 /* No DMA */
-#define XEM_CFG_SIMPLE_DMA 2 /* Simple DMA */
-#define XEM_CFG_DMA_SG 3 /* DMA scatter gather */
-
-/*
- * The next few constants help upper layers determine the size of memory
- * pools used for Ethernet buffers and descriptor lists.
- */
-#define XEM_MAC_ADDR_SIZE 6 /* six-byte MAC address */
-#define XEM_MTU 1500 /* max size of Ethernet frame */
-#define XEM_HDR_SIZE 14 /* size of Ethernet header */
-#define XEM_HDR_VLAN_SIZE 18 /* size of Ethernet header with VLAN */
-#define XEM_TRL_SIZE 4 /* size of Ethernet trailer (FCS) */
-#define XEM_MAX_FRAME_SIZE (XEM_MTU + XEM_HDR_SIZE + XEM_TRL_SIZE)
-#define XEM_MAX_VLAN_FRAME_SIZE (XEM_MTU + XEM_HDR_VLAN_SIZE + XEM_TRL_SIZE)
-
-/*
- * Define a default number of send and receive buffers
- */
-#define XEM_MIN_RECV_BUFS 32 /* minimum # of recv buffers */
-#define XEM_DFT_RECV_BUFS 64 /* default # of recv buffers */
-
-#define XEM_MIN_SEND_BUFS 16 /* minimum # of send buffers */
-#define XEM_DFT_SEND_BUFS 32 /* default # of send buffers */
-
-#define XEM_MIN_BUFFERS (XEM_MIN_RECV_BUFS + XEM_MIN_SEND_BUFS)
-#define XEM_DFT_BUFFERS (XEM_DFT_RECV_BUFS + XEM_DFT_SEND_BUFS)
-
-/*
- * Define the number of send and receive buffer descriptors, used for
- * scatter-gather DMA
- */
-#define XEM_MIN_RECV_DESC 16 /* minimum # of recv descriptors */
-#define XEM_DFT_RECV_DESC 32 /* default # of recv descriptors */
-
-#define XEM_MIN_SEND_DESC 8 /* minimum # of send descriptors */
-#define XEM_DFT_SEND_DESC 16 /* default # of send descriptors */
-
-/**************************** Type Definitions *******************************/
-
-/**
- * Ethernet statistics (see XEmac_GetStats() and XEmac_ClearStats())
- */
-typedef struct {
- u32 XmitFrames; /**< Number of frames transmitted */
- u32 XmitBytes; /**< Number of bytes transmitted */
- u32 XmitLateCollisionErrors;
- /**< Number of transmission failures
- due to late collisions */
- u32 XmitExcessDeferral; /**< Number of transmission failures
- due o excess collision deferrals */
- u32 XmitOverrunErrors; /**< Number of transmit overrun errors */
- u32 XmitUnderrunErrors; /**< Number of transmit underrun errors */
- u32 RecvFrames; /**< Number of frames received */
- u32 RecvBytes; /**< Number of bytes received */
- u32 RecvFcsErrors; /**< Number of frames discarded due
- to FCS errors */
- u32 RecvAlignmentErrors; /**< Number of frames received with
- alignment errors */
- u32 RecvOverrunErrors; /**< Number of frames discarded due
- to overrun errors */
- u32 RecvUnderrunErrors; /**< Number of recv underrun errors */
- u32 RecvMissedFrameErrors;
- /**< Number of frames missed by MAC */
- u32 RecvCollisionErrors; /**< Number of frames discarded due
- to collisions */
- u32 RecvLengthFieldErrors;
- /**< Number of frames discarded with
- invalid length field */
- u32 RecvShortErrors; /**< Number of short frames discarded */
- u32 RecvLongErrors; /**< Number of long frames discarded */
- u32 DmaErrors; /**< Number of DMA errors since init */
- u32 FifoErrors; /**< Number of FIFO errors since init */
- u32 RecvInterrupts; /**< Number of receive interrupts */
- u32 XmitInterrupts; /**< Number of transmit interrupts */
- u32 EmacInterrupts; /**< Number of MAC (device) interrupts */
- u32 TotalIntrs; /**< Total interrupts */
-} XEmac_Stats;
-
-/**
- * This typedef contains configuration information for a device.
- */
-typedef struct {
- u16 DeviceId; /**< Unique ID of device */
- u32 BaseAddress; /**< Register base address */
- u32 HasCounters; /**< Does device have counters? */
- u8 IpIfDmaConfig; /**< IPIF/DMA hardware configuration */
- u32 HasMii; /**< Does device support MII? */
-
-} XEmac_Config;
-
-/** @name Typedefs for callbacks
- * Callback functions.
- * @{
- */
-/**
- * Callback when data is sent or received with scatter-gather DMA.
- *
- * @param CallBackRef is a callback reference passed in by the upper layer
- * when setting the callback functions, and passed back to the upper
- * layer when the callback is invoked.
- * @param BdPtr is a pointer to the first buffer descriptor in a list of
- * buffer descriptors.
- * @param NumBds is the number of buffer descriptors in the list pointed
- * to by BdPtr.
- */
-typedef void (*XEmac_SgHandler) (void *CallBackRef, XBufDescriptor * BdPtr,
- u32 NumBds);
-
-/**
- * Callback when data is sent or received with direct FIFO communication or
- * simple DMA. The user typically defines two callacks, one for send and one
- * for receive.
- *
- * @param CallBackRef is a callback reference passed in by the upper layer
- * when setting the callback functions, and passed back to the upper
- * layer when the callback is invoked.
- */
-typedef void (*XEmac_FifoHandler) (void *CallBackRef);
-
-/**
- * Callback when an asynchronous error occurs.
- *
- * @param CallBackRef is a callback reference passed in by the upper layer
- * when setting the callback functions, and passed back to the upper
- * layer when the callback is invoked.
- * @param ErrorCode is a Xilinx error code defined in xstatus.h. Also see
- * XEmac_SetErrorHandler() for a description of possible errors.
- */
-typedef void (*XEmac_ErrorHandler) (void *CallBackRef, XStatus ErrorCode);
-/*@}*/
-
-/**
- * The XEmac driver instance data. The user is required to allocate a
- * variable of this type for every EMAC device in the system. A pointer
- * to a variable of this type is then passed to the driver API functions.
- */
-typedef struct {
- u32 BaseAddress; /* Base address (of IPIF) */
- u32 IsStarted; /* Device is currently started */
- u32 IsReady; /* Device is initialized and ready */
- u32 IsPolled; /* Device is in polled mode */
- u8 IpIfDmaConfig; /* IPIF/DMA hardware configuration */
- u32 HasMii; /* Does device support MII? */
- u32 HasMulticastHash; /* Does device support multicast hash table? */
-
- XEmac_Stats Stats;
- XPacketFifoV100b RecvFifo; /* FIFO used to receive frames */
- XPacketFifoV100b SendFifo; /* FIFO used to send frames */
-
- /*
- * Callbacks
- */
- XEmac_FifoHandler FifoRecvHandler; /* for non-DMA/simple DMA interrupts */
- void *FifoRecvRef;
- XEmac_FifoHandler FifoSendHandler; /* for non-DMA/simple DMA interrupts */
- void *FifoSendRef;
- XEmac_ErrorHandler ErrorHandler; /* for asynchronous errors */
- void *ErrorRef;
-
- XDmaChannel RecvChannel; /* DMA receive channel driver */
- XDmaChannel SendChannel; /* DMA send channel driver */
-
- XEmac_SgHandler SgRecvHandler; /* callback for scatter-gather DMA */
- void *SgRecvRef;
- XEmac_SgHandler SgSendHandler; /* callback for scatter-gather DMA */
- void *SgSendRef;
-} XEmac;
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/*****************************************************************************/
-/**
-*
-* This macro determines if the device is currently configured for
-* scatter-gather DMA.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-*
-* @return
-*
-* Boolean TRUE if the device is configured for scatter-gather DMA, or FALSE
-* if it is not.
-*
-* @note
-*
-* Signature: u32 XEmac_mIsSgDma(XEmac *InstancePtr)
-*
-******************************************************************************/
-#define XEmac_mIsSgDma(InstancePtr) \
- ((InstancePtr)->IpIfDmaConfig == XEM_CFG_DMA_SG)
-
-/*****************************************************************************/
-/**
-*
-* This macro determines if the device is currently configured for simple DMA.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-*
-* @return
-*
-* Boolean TRUE if the device is configured for simple DMA, or FALSE otherwise
-*
-* @note
-*
-* Signature: u32 XEmac_mIsSimpleDma(XEmac *InstancePtr)
-*
-******************************************************************************/
-#define XEmac_mIsSimpleDma(InstancePtr) \
- ((InstancePtr)->IpIfDmaConfig == XEM_CFG_SIMPLE_DMA)
-
-/*****************************************************************************/
-/**
-*
-* This macro determines if the device is currently configured with DMA (either
-* simple DMA or scatter-gather DMA)
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-*
-* @return
-*
-* Boolean TRUE if the device is configured with DMA, or FALSE otherwise
-*
-* @note
-*
-* Signature: u32 XEmac_mIsDma(XEmac *InstancePtr)
-*
-******************************************************************************/
-#define XEmac_mIsDma(InstancePtr) \
- (XEmac_mIsSimpleDma(InstancePtr) || XEmac_mIsSgDma(InstancePtr))
-
-/************************** Function Prototypes ******************************/
-
-/*
- * Initialization functions in xemac.c
- */
-XStatus XEmac_Initialize(XEmac * InstancePtr, u16 DeviceId);
-XStatus XEmac_Start(XEmac * InstancePtr);
-XStatus XEmac_Stop(XEmac * InstancePtr);
-void XEmac_Reset(XEmac * InstancePtr);
-XEmac_Config *XEmac_LookupConfig(u16 DeviceId);
-
-/*
- * Diagnostic functions in xemac_selftest.c
- */
-XStatus XEmac_SelfTest(XEmac * InstancePtr);
-
-/*
- * Polled functions in xemac_polled.c
- */
-XStatus XEmac_PollSend(XEmac * InstancePtr, u8 * BufPtr, u32 ByteCount);
-XStatus XEmac_PollRecv(XEmac * InstancePtr, u8 * BufPtr, u32 * ByteCountPtr);
-
-/*
- * Interrupts with scatter-gather DMA functions in xemac_intr_dma.c
- */
-XStatus XEmac_SgSend(XEmac * InstancePtr, XBufDescriptor * BdPtr, int Delay);
-XStatus XEmac_SgRecv(XEmac * InstancePtr, XBufDescriptor * BdPtr);
-XStatus XEmac_SetPktThreshold(XEmac * InstancePtr, u32 Direction, u8 Threshold);
-XStatus XEmac_GetPktThreshold(XEmac * InstancePtr, u32 Direction,
- u8 * ThreshPtr);
-XStatus XEmac_SetPktWaitBound(XEmac * InstancePtr, u32 Direction,
- u32 TimerValue);
-XStatus XEmac_GetPktWaitBound(XEmac * InstancePtr, u32 Direction,
- u32 * WaitPtr);
-XStatus XEmac_SetSgRecvSpace(XEmac * InstancePtr, u32 * MemoryPtr,
- u32 ByteCount);
-XStatus XEmac_SetSgSendSpace(XEmac * InstancePtr, u32 * MemoryPtr,
- u32 ByteCount);
-void XEmac_SetSgRecvHandler(XEmac * InstancePtr, void *CallBackRef,
- XEmac_SgHandler FuncPtr);
-void XEmac_SetSgSendHandler(XEmac * InstancePtr, void *CallBackRef,
- XEmac_SgHandler FuncPtr);
-
-void XEmac_IntrHandlerDma(void *InstancePtr); /* interrupt handler */
-
-/*
- * Interrupts with direct FIFO functions in xemac_intr_fifo.c. Also used
- * for simple DMA.
- */
-XStatus XEmac_FifoSend(XEmac * InstancePtr, u8 * BufPtr, u32 ByteCount);
-XStatus XEmac_FifoRecv(XEmac * InstancePtr, u8 * BufPtr, u32 * ByteCountPtr);
-void XEmac_SetFifoRecvHandler(XEmac * InstancePtr, void *CallBackRef,
- XEmac_FifoHandler FuncPtr);
-void XEmac_SetFifoSendHandler(XEmac * InstancePtr, void *CallBackRef,
- XEmac_FifoHandler FuncPtr);
-
-void XEmac_IntrHandlerFifo(void *InstancePtr); /* interrupt handler */
-
-/*
- * General interrupt-related functions in xemac_intr.c
- */
-void XEmac_SetErrorHandler(XEmac * InstancePtr, void *CallBackRef,
- XEmac_ErrorHandler FuncPtr);
-
-/*
- * MAC configuration in xemac_options.c
- */
-XStatus XEmac_SetOptions(XEmac * InstancePtr, u32 OptionFlag);
-u32 XEmac_GetOptions(XEmac * InstancePtr);
-XStatus XEmac_SetMacAddress(XEmac * InstancePtr, u8 * AddressPtr);
-void XEmac_GetMacAddress(XEmac * InstancePtr, u8 * BufferPtr);
-XStatus XEmac_SetInterframeGap(XEmac * InstancePtr, u8 Part1, u8 Part2);
-void XEmac_GetInterframeGap(XEmac * InstancePtr, u8 * Part1Ptr, u8 * Part2Ptr);
-
-/*
- * Multicast functions in xemac_multicast.c (not supported by EMAC yet)
- */
-XStatus XEmac_MulticastAdd(XEmac * InstancePtr, u8 * AddressPtr);
-XStatus XEmac_MulticastClear(XEmac * InstancePtr);
-
-/*
- * PHY configuration in xemac_phy.c
- */
-XStatus XEmac_PhyRead(XEmac * InstancePtr, u32 PhyAddress,
- u32 RegisterNum, u16 * PhyDataPtr);
-XStatus XEmac_PhyWrite(XEmac * InstancePtr, u32 PhyAddress,
- u32 RegisterNum, u16 PhyData);
-
-/*
- * Statistics in xemac_stats.c
- */
-void XEmac_GetStats(XEmac * InstancePtr, XEmac_Stats * StatsPtr);
-void XEmac_ClearStats(XEmac * InstancePtr);
-
-#endif /* end of protection macro */
diff --git a/board/xilinx/xilinx_enet/xemac_g.c b/board/xilinx/xilinx_enet/xemac_g.c
deleted file mode 100644
index d985157..0000000
--- a/board/xilinx/xilinx_enet/xemac_g.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*******************************************************************
-*
-* CAUTION: This file is automatically generated by libgen.
-* Version: Xilinx EDK 6.1.2 EDK_G.14
-* DO NOT EDIT.
-*
-* Author: Xilinx, Inc.
-*
-*
-* This program is free software; you can redistribute it and/or modify it
-* under the terms of the GNU General Public License as published by the
-* Free Software Foundation; either version 2 of the License, or (at your
-* option) any later version.
-*
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-* FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-* Xilinx hardware products are not intended for use in life support
-* appliances, devices, or systems. Use in such applications is
-* expressly prohibited.
-*
-*
-* (c) Copyright 2002-2004 Xilinx Inc.
-* All rights reserved.
-*
-*
-* You should have received a copy of the GNU General Public License along
-* with this program; if not, write to the Free Software Foundation, Inc.,
-* 675 Mass Ave, Cambridge, MA 02139, USA.
-*
-* Description: Driver configuration
-*
-*******************************************************************/
-
-#include <config.h>
-#include "xemac.h"
-
-/*
-* The configuration table for devices
-*/
-
-XEmac_Config XEmac_ConfigTable[] = {
- {
- XPAR_OPB_ETHERNET_0_DEVICE_ID,
- XPAR_OPB_ETHERNET_0_BASEADDR,
- XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST,
- XPAR_OPB_ETHERNET_0_DMA_PRESENT,
- XPAR_OPB_ETHERNET_0_MII_EXIST}
-};
diff --git a/board/xilinx/xilinx_enet/xemac_i.h b/board/xilinx/xilinx_enet/xemac_i.h
deleted file mode 100644
index 9c160f3..0000000
--- a/board/xilinx/xilinx_enet/xemac_i.h
+++ /dev/null
@@ -1,207 +0,0 @@
-/******************************************************************************
-*
-* Author: Xilinx, Inc.
-*
-*
-* This program is free software; you can redistribute it and/or modify it
-* under the terms of the GNU General Public License as published by the
-* Free Software Foundation; either version 2 of the License, or (at your
-* option) any later version.
-*
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-* FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-* Xilinx hardware products are not intended for use in life support
-* appliances, devices, or systems. Use in such applications is
-* expressly prohibited.
-*
-*
-* (c) Copyright 2002-2004 Xilinx Inc.
-* All rights reserved.
-*
-*
-* You should have received a copy of the GNU General Public License along
-* with this program; if not, write to the Free Software Foundation, Inc.,
-* 675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/**
-*
-* @file xemac_i.h
-*
-* This header file contains internal identifiers, which are those shared
-* between XEmac components. The identifiers in this file are not intended for
-* use external to the driver.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver Who Date Changes
-* ----- ---- -------- -----------------------------------------------
-* 1.00a rpm 07/31/01 First release
-* 1.00b rpm 02/20/02 Repartitioned files and functions
-* 1.00b rpm 04/29/02 Moved register definitions to xemac_l.h
-* 1.00c rpm 12/05/02 New version includes support for simple DMA
-* </pre>
-*
-******************************************************************************/
-
-#ifndef XEMAC_I_H /* prevent circular inclusions */
-#define XEMAC_I_H /* by using protection macros */
-
-/***************************** Include Files *********************************/
-
-#include "xemac.h"
-#include "xemac_l.h"
-
-/************************** Constant Definitions *****************************/
-
-/*
- * Default buffer descriptor control word masks. The default send BD control
- * is set for incrementing the source address by one for each byte transferred,
- * and specify that the destination address (FIFO) is local to the device. The
- * default receive BD control is set for incrementing the destination address
- * by one for each byte transferred, and specify that the source address is
- * local to the device.
- */
-#define XEM_DFT_SEND_BD_MASK (XDC_DMACR_SOURCE_INCR_MASK | \
- XDC_DMACR_DEST_LOCAL_MASK)
-#define XEM_DFT_RECV_BD_MASK (XDC_DMACR_DEST_INCR_MASK | \
- XDC_DMACR_SOURCE_LOCAL_MASK)
-
-/*
- * Masks for the IPIF Device Interrupt enable and status registers.
- */
-#define XEM_IPIF_EMAC_MASK 0x00000004UL /* MAC interrupt */
-#define XEM_IPIF_SEND_DMA_MASK 0x00000008UL /* Send DMA interrupt */
-#define XEM_IPIF_RECV_DMA_MASK 0x00000010UL /* Receive DMA interrupt */
-#define XEM_IPIF_RECV_FIFO_MASK 0x00000020UL /* Receive FIFO interrupt */
-#define XEM_IPIF_SEND_FIFO_MASK 0x00000040UL /* Send FIFO interrupt */
-
-/*
- * Default IPIF Device Interrupt mask when configured for DMA
- */
-#define XEM_IPIF_DMA_DFT_MASK (XEM_IPIF_SEND_DMA_MASK | \
- XEM_IPIF_RECV_DMA_MASK | \
- XEM_IPIF_EMAC_MASK | \
- XEM_IPIF_SEND_FIFO_MASK | \
- XEM_IPIF_RECV_FIFO_MASK)
-
-/*
- * Default IPIF Device Interrupt mask when configured without DMA
- */
-#define XEM_IPIF_FIFO_DFT_MASK (XEM_IPIF_EMAC_MASK | \
- XEM_IPIF_SEND_FIFO_MASK | \
- XEM_IPIF_RECV_FIFO_MASK)
-
-#define XEM_IPIF_DMA_DEV_INTR_COUNT 7 /* Number of interrupt sources */
-#define XEM_IPIF_FIFO_DEV_INTR_COUNT 5 /* Number of interrupt sources */
-#define XEM_IPIF_DEVICE_INTR_COUNT 7 /* Number of interrupt sources */
-#define XEM_IPIF_IP_INTR_COUNT 22 /* Number of MAC interrupts */
-
-/* a mask for all transmit interrupts, used in polled mode */
-#define XEM_EIR_XMIT_ALL_MASK (XEM_EIR_XMIT_DONE_MASK | \
- XEM_EIR_XMIT_ERROR_MASK | \
- XEM_EIR_XMIT_SFIFO_EMPTY_MASK | \
- XEM_EIR_XMIT_LFIFO_FULL_MASK)
-
-/* a mask for all receive interrupts, used in polled mode */
-#define XEM_EIR_RECV_ALL_MASK (XEM_EIR_RECV_DONE_MASK | \
- XEM_EIR_RECV_ERROR_MASK | \
- XEM_EIR_RECV_LFIFO_EMPTY_MASK | \
- XEM_EIR_RECV_LFIFO_OVER_MASK | \
- XEM_EIR_RECV_LFIFO_UNDER_MASK | \
- XEM_EIR_RECV_DFIFO_OVER_MASK | \
- XEM_EIR_RECV_MISSED_FRAME_MASK | \
- XEM_EIR_RECV_COLLISION_MASK | \
- XEM_EIR_RECV_FCS_ERROR_MASK | \
- XEM_EIR_RECV_LEN_ERROR_MASK | \
- XEM_EIR_RECV_SHORT_ERROR_MASK | \
- XEM_EIR_RECV_LONG_ERROR_MASK | \
- XEM_EIR_RECV_ALIGN_ERROR_MASK)
-
-/* a default interrupt mask for scatter-gather DMA operation */
-#define XEM_EIR_DFT_SG_MASK (XEM_EIR_RECV_ERROR_MASK | \
- XEM_EIR_RECV_LFIFO_OVER_MASK | \
- XEM_EIR_RECV_LFIFO_UNDER_MASK | \
- XEM_EIR_XMIT_SFIFO_OVER_MASK | \
- XEM_EIR_XMIT_SFIFO_UNDER_MASK | \
- XEM_EIR_XMIT_LFIFO_OVER_MASK | \
- XEM_EIR_XMIT_LFIFO_UNDER_MASK | \
- XEM_EIR_RECV_DFIFO_OVER_MASK | \
- XEM_EIR_RECV_MISSED_FRAME_MASK | \
- XEM_EIR_RECV_COLLISION_MASK | \
- XEM_EIR_RECV_FCS_ERROR_MASK | \
- XEM_EIR_RECV_LEN_ERROR_MASK | \
- XEM_EIR_RECV_SHORT_ERROR_MASK | \
- XEM_EIR_RECV_LONG_ERROR_MASK | \
- XEM_EIR_RECV_ALIGN_ERROR_MASK)
-
-/* a default interrupt mask for non-DMA operation (direct FIFOs) */
-#define XEM_EIR_DFT_FIFO_MASK (XEM_EIR_XMIT_DONE_MASK | \
- XEM_EIR_RECV_DONE_MASK | \
- XEM_EIR_DFT_SG_MASK)
-
-/*
- * Mask for the DMA interrupt enable and status registers when configured
- * for scatter-gather DMA.
- */
-#define XEM_DMA_SG_INTR_MASK (XDC_IXR_DMA_ERROR_MASK | \
- XDC_IXR_PKT_THRESHOLD_MASK | \
- XDC_IXR_PKT_WAIT_BOUND_MASK | \
- XDC_IXR_SG_END_MASK)
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/*****************************************************************************/
-/*
-*
-* Clears a structure of given size, in bytes, by setting each byte to 0.
-*
-* @param StructPtr is a pointer to the structure to be cleared.
-* @param NumBytes is the number of bytes in the structure.
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* Signature: void XEmac_mClearStruct(u8 *StructPtr, unsigned int NumBytes)
-*
-******************************************************************************/
-#define XEmac_mClearStruct(StructPtr, NumBytes) \
-{ \
- int i; \
- u8 *BytePtr = (u8 *)(StructPtr); \
- for (i=0; i < (unsigned int)(NumBytes); i++) \
- { \
- *BytePtr++ = 0; \
- } \
-}
-
-/************************** Variable Definitions *****************************/
-
-extern XEmac_Config XEmac_ConfigTable[];
-
-/************************** Function Prototypes ******************************/
-
-void XEmac_CheckEmacError(XEmac * InstancePtr, u32 IntrStatus);
-void XEmac_CheckFifoRecvError(XEmac * InstancePtr);
-void XEmac_CheckFifoSendError(XEmac * InstancePtr);
-
-#endif /* end of protection macro */
diff --git a/board/xilinx/xilinx_enet/xemac_intr.c b/board/xilinx/xilinx_enet/xemac_intr.c
deleted file mode 100644
index b9a2621..0000000
--- a/board/xilinx/xilinx_enet/xemac_intr.c
+++ /dev/null
@@ -1,402 +0,0 @@
-/******************************************************************************
-*
-* Author: Xilinx, Inc.
-*
-*
-* This program is free software; you can redistribute it and/or modify it
-* under the terms of the GNU General Public License as published by the
-* Free Software Foundation; either version 2 of the License, or (at your
-* option) any later version.
-*
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-* FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-* Xilinx hardware products are not intended for use in life support
-* appliances, devices, or systems. Use in such applications is
-* expressly prohibited.
-*
-*
-* (c) Copyright 2002-2004 Xilinx Inc.
-* All rights reserved.
-*
-*
-* You should have received a copy of the GNU General Public License along
-* with this program; if not, write to the Free Software Foundation, Inc.,
-* 675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/**
-*
-* @file xemac_intr.c
-*
-* This file contains general interrupt-related functions of the XEmac driver.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver Who Date Changes
-* ----- ---- -------- -----------------------------------------------
-* 1.00a rpm 07/31/01 First release
-* 1.00b rpm 02/20/02 Repartitioned files and functions
-* 1.00c rpm 12/05/02 New version includes support for simple DMA
-* 1.00c rpm 03/31/03 Added comment to indicate that no Receive Length FIFO
-* overrun interrupts occur in v1.00l and later of the EMAC
-* device. This avoids the need to reset the device on
-* receive overruns.
-* </pre>
-*
-******************************************************************************/
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-#include "xemac_i.h"
-#include "xio.h"
-#include "xipif_v1_23_b.h" /* Uses v1.23b of the IPIF */
-
-/************************** Constant Definitions *****************************/
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Variable Definitions *****************************/
-
-/************************** Function Prototypes ******************************/
-
-/*****************************************************************************/
-/**
-*
-* Set the callback function for handling asynchronous errors. The upper layer
-* software should call this function during initialization.
-*
-* The error callback is invoked by the driver within interrupt context, so it
-* needs to do its job quickly. If there are potentially slow operations within
-* the callback, these should be done at task-level.
-*
-* The Xilinx errors that must be handled by the callback are:
-* - XST_DMA_ERROR indicates an unrecoverable DMA error occurred. This is
-* typically a bus error or bus timeout. The handler must reset and
-* re-configure the device.
-* - XST_FIFO_ERROR indicates an unrecoverable FIFO error occurred. This is a
-* deadlock condition in the packet FIFO. The handler must reset and
-* re-configure the device.
-* - XST_RESET_ERROR indicates an unrecoverable MAC error occurred, usually an
-* overrun or underrun. The handler must reset and re-configure the device.
-* - XST_DMA_SG_NO_LIST indicates an attempt was made to access a scatter-gather
-* DMA list that has not yet been created.
-* - XST_DMA_SG_LIST_EMPTY indicates the driver tried to get a descriptor from
-* the receive descriptor list, but the list was empty.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param CallBackRef is a reference pointer to be passed back to the adapter in
-* the callback. This helps the adapter correlate the callback to a
-* particular driver.
-* @param FuncPtr is the pointer to the callback function.
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-void
-XEmac_SetErrorHandler(XEmac * InstancePtr, void *CallBackRef,
- XEmac_ErrorHandler FuncPtr)
-{
- XASSERT_VOID(InstancePtr != NULL);
- XASSERT_VOID(FuncPtr != NULL);
- XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- InstancePtr->ErrorHandler = FuncPtr;
- InstancePtr->ErrorRef = CallBackRef;
-}
-
-/****************************************************************************/
-/*
-*
-* Check the interrupt status bits of the Ethernet MAC for errors. Errors
-* currently handled are:
-* - Receive length FIFO overrun. Indicates data was lost due to the receive
-* length FIFO becoming full during the reception of a packet. Only a device
-* reset clears this condition.
-* - Receive length FIFO underrun. An attempt to read an empty FIFO. Only a
-* device reset clears this condition.
-* - Transmit status FIFO overrun. Indicates data was lost due to the transmit
-* status FIFO becoming full following the transmission of a packet. Only a
-* device reset clears this condition.
-* - Transmit status FIFO underrun. An attempt to read an empty FIFO. Only a
-* device reset clears this condition.
-* - Transmit length FIFO overrun. Indicates data was lost due to the transmit
-* length FIFO becoming full following the transmission of a packet. Only a
-* device reset clears this condition.
-* - Transmit length FIFO underrun. An attempt to read an empty FIFO. Only a
-* device reset clears this condition.
-* - Receive data FIFO overrun. Indicates data was lost due to the receive data
-* FIFO becoming full during the reception of a packet.
-* - Receive data errors:
-* - Receive missed frame error. Valid data was lost by the MAC.
-* - Receive collision error. Data was lost by the MAC due to a collision.
-* - Receive FCS error. Data was dicarded by the MAC due to FCS error.
-* - Receive length field error. Data was dicarded by the MAC due to an invalid
-* length field in the packet.
-* - Receive short error. Data was dicarded by the MAC because a packet was
-* shorter than allowed.
-* - Receive long error. Data was dicarded by the MAC because a packet was
-* longer than allowed.
-* - Receive alignment error. Data was truncated by the MAC because its length
-* was not byte-aligned.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param IntrStatus is the contents of the interrupt status register to be checked
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* This function is intended for internal use only.
-*
-******************************************************************************/
-void
-XEmac_CheckEmacError(XEmac * InstancePtr, u32 IntrStatus)
-{
- u32 ResetError = FALSE;
-
- /*
- * First check for receive fifo overrun/underrun errors. Most require a
- * reset by the user to clear, but the data FIFO overrun error does not.
- */
- if (IntrStatus & XEM_EIR_RECV_DFIFO_OVER_MASK) {
- InstancePtr->Stats.RecvOverrunErrors++;
- InstancePtr->Stats.FifoErrors++;
- }
-
- if (IntrStatus & XEM_EIR_RECV_LFIFO_OVER_MASK) {
- /*
- * Receive Length FIFO overrun interrupts no longer occur in v1.00l
- * and later of the EMAC device. Frames are just dropped by the EMAC
- * if the length FIFO is full. The user would notice the Receive Missed
- * Frame count incrementing without any other errors being reported.
- * This code is left here for backward compatibility with v1.00k and
- * older EMAC devices.
- */
- InstancePtr->Stats.RecvOverrunErrors++;
- InstancePtr->Stats.FifoErrors++;
- ResetError = TRUE; /* requires a reset */
- }
-
- if (IntrStatus & XEM_EIR_RECV_LFIFO_UNDER_MASK) {
- InstancePtr->Stats.RecvUnderrunErrors++;
- InstancePtr->Stats.FifoErrors++;
- ResetError = TRUE; /* requires a reset */
- }
-
- /*
- * Now check for general receive errors. Get the latest count where
- * available, otherwise just bump the statistic so we know the interrupt
- * occurred.
- */
- if (IntrStatus & XEM_EIR_RECV_ERROR_MASK) {
- if (IntrStatus & XEM_EIR_RECV_MISSED_FRAME_MASK) {
- /*
- * Caused by length FIFO or data FIFO overruns on receive side
- */
- InstancePtr->Stats.RecvMissedFrameErrors =
- XIo_In32(InstancePtr->BaseAddress +
- XEM_RMFC_OFFSET);
- }
-
- if (IntrStatus & XEM_EIR_RECV_COLLISION_MASK) {
- InstancePtr->Stats.RecvCollisionErrors =
- XIo_In32(InstancePtr->BaseAddress + XEM_RCC_OFFSET);
- }
-
- if (IntrStatus & XEM_EIR_RECV_FCS_ERROR_MASK) {
- InstancePtr->Stats.RecvFcsErrors =
- XIo_In32(InstancePtr->BaseAddress +
- XEM_RFCSEC_OFFSET);
- }
-
- if (IntrStatus & XEM_EIR_RECV_LEN_ERROR_MASK) {
- InstancePtr->Stats.RecvLengthFieldErrors++;
- }
-
- if (IntrStatus & XEM_EIR_RECV_SHORT_ERROR_MASK) {
- InstancePtr->Stats.RecvShortErrors++;
- }
-
- if (IntrStatus & XEM_EIR_RECV_LONG_ERROR_MASK) {
- InstancePtr->Stats.RecvLongErrors++;
- }
-
- if (IntrStatus & XEM_EIR_RECV_ALIGN_ERROR_MASK) {
- InstancePtr->Stats.RecvAlignmentErrors =
- XIo_In32(InstancePtr->BaseAddress +
- XEM_RAEC_OFFSET);
- }
-
- /*
- * Bump recv interrupts stats only if not scatter-gather DMA (this
- * stat gets bumped elsewhere in that case)
- */
- if (!XEmac_mIsSgDma(InstancePtr)) {
- InstancePtr->Stats.RecvInterrupts++; /* TODO: double bump? */
- }
-
- }
-
- /*
- * Check for transmit errors. These apply to both DMA and non-DMA modes
- * of operation. The entire device should be reset after overruns or
- * underruns.
- */
- if (IntrStatus & (XEM_EIR_XMIT_SFIFO_OVER_MASK |
- XEM_EIR_XMIT_LFIFO_OVER_MASK)) {
- InstancePtr->Stats.XmitOverrunErrors++;
- InstancePtr->Stats.FifoErrors++;
- ResetError = TRUE;
- }
-
- if (IntrStatus & (XEM_EIR_XMIT_SFIFO_UNDER_MASK |
- XEM_EIR_XMIT_LFIFO_UNDER_MASK)) {
- InstancePtr->Stats.XmitUnderrunErrors++;
- InstancePtr->Stats.FifoErrors++;
- ResetError = TRUE;
- }
-
- if (ResetError) {
- /*
- * If a reset error occurred, disable the EMAC interrupts since the
- * reset-causing interrupt(s) is latched in the EMAC - meaning it will
- * keep occurring until the device is reset. In order to give the higher
- * layer software time to reset the device, we have to disable the
- * overrun/underrun interrupts until that happens. We trust that the
- * higher layer resets the device. We are able to get away with disabling
- * all EMAC interrupts since the only interrupts it generates are for
- * error conditions, and we don't care about any more errors right now.
- */
- XIIF_V123B_WRITE_IIER(InstancePtr->BaseAddress, 0);
-
- /*
- * Invoke the error handler callback, which should result in a reset
- * of the device by the upper layer software.
- */
- InstancePtr->ErrorHandler(InstancePtr->ErrorRef,
- XST_RESET_ERROR);
- }
-}
-
-/*****************************************************************************/
-/*
-*
-* Check the receive packet FIFO for errors. FIFO error interrupts are:
-* - Deadlock. See the XPacketFifo component for a description of deadlock on a
-* FIFO.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-*
-* @return
-*
-* Although the function returns void, it can return an asynchronous error to the
-* application through the error handler. It can return XST_FIFO_ERROR if a FIFO
-* error occurred.
-*
-* @note
-*
-* This function is intended for internal use only.
-*
-******************************************************************************/
-void
-XEmac_CheckFifoRecvError(XEmac * InstancePtr)
-{
- /*
- * Although the deadlock is currently the only interrupt from a packet
- * FIFO, make sure it is deadlocked before taking action. There is no
- * need to clear this interrupt since it requires a reset of the device.
- */
- if (XPF_V100B_IS_DEADLOCKED(&InstancePtr->RecvFifo)) {
- u32 IntrEnable;
-
- InstancePtr->Stats.FifoErrors++;
-
- /*
- * Invoke the error callback function, which should result in a reset
- * of the device by the upper layer software. We first need to disable
- * the FIFO interrupt, since otherwise the upper layer thread that
- * handles the reset may never run because this interrupt condition
- * doesn't go away until a reset occurs (there is no way to ack it).
- */
- IntrEnable = XIIF_V123B_READ_DIER(InstancePtr->BaseAddress);
- XIIF_V123B_WRITE_DIER(InstancePtr->BaseAddress,
- IntrEnable & ~XEM_IPIF_RECV_FIFO_MASK);
-
- InstancePtr->ErrorHandler(InstancePtr->ErrorRef,
- XST_FIFO_ERROR);
- }
-}
-
-/*****************************************************************************/
-/*
-*
-* Check the send packet FIFO for errors. FIFO error interrupts are:
-* - Deadlock. See the XPacketFifo component for a description of deadlock on a
-* FIFO.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-*
-* @return
-*
-* Although the function returns void, it can return an asynchronous error to the
-* application through the error handler. It can return XST_FIFO_ERROR if a FIFO
-* error occurred.
-*
-* @note
-*
-* This function is intended for internal use only.
-*
-******************************************************************************/
-void
-XEmac_CheckFifoSendError(XEmac * InstancePtr)
-{
- /*
- * Although the deadlock is currently the only interrupt from a packet
- * FIFO, make sure it is deadlocked before taking action. There is no
- * need to clear this interrupt since it requires a reset of the device.
- */
- if (XPF_V100B_IS_DEADLOCKED(&InstancePtr->SendFifo)) {
- u32 IntrEnable;
-
- InstancePtr->Stats.FifoErrors++;
-
- /*
- * Invoke the error callback function, which should result in a reset
- * of the device by the upper layer software. We first need to disable
- * the FIFO interrupt, since otherwise the upper layer thread that
- * handles the reset may never run because this interrupt condition
- * doesn't go away until a reset occurs (there is no way to ack it).
- */
- IntrEnable = XIIF_V123B_READ_DIER(InstancePtr->BaseAddress);
- XIIF_V123B_WRITE_DIER(InstancePtr->BaseAddress,
- IntrEnable & ~XEM_IPIF_SEND_FIFO_MASK);
-
- InstancePtr->ErrorHandler(InstancePtr->ErrorRef,
- XST_FIFO_ERROR);
- }
-}
diff --git a/board/xilinx/xilinx_enet/xemac_intr_dma.c b/board/xilinx/xilinx_enet/xemac_intr_dma.c
deleted file mode 100644
index 567abb4..0000000
--- a/board/xilinx/xilinx_enet/xemac_intr_dma.c
+++ /dev/null
@@ -1,1344 +0,0 @@
-/******************************************************************************
-*
-* Author: Xilinx, Inc.
-*
-*
-* This program is free software; you can redistribute it and/or modify it
-* under the terms of the GNU General Public License as published by the
-* Free Software Foundation; either version 2 of the License, or (at your
-* option) any later version.
-*
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-* FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-* Xilinx hardware products are not intended for use in life support
-* appliances, devices, or systems. Use in such applications is
-* expressly prohibited.
-*
-*
-* (c) Copyright 2002-2004 Xilinx Inc.
-* All rights reserved.
-*
-*
-* You should have received a copy of the GNU General Public License along
-* with this program; if not, write to the Free Software Foundation, Inc.,
-* 675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/**
-*
-* @file xemac_intr_dma.c
-*
-* Contains functions used in interrupt mode when configured with scatter-gather
-* DMA.
-*
-* The interrupt handler, XEmac_IntrHandlerDma(), must be connected by the user
-* to the interrupt controller.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver Who Date Changes
-* ----- ---- -------- ---------------------------------------------------------
-* 1.00a rpm 07/31/01 First release
-* 1.00b rpm 02/20/02 Repartitioned files and functions
-* 1.00c rpm 12/05/02 New version includes support for simple DMA and the delay
-* argument to SgSend
-* 1.00c rpm 02/03/03 The XST_DMA_SG_COUNT_EXCEEDED return code was removed
-* from SetPktThreshold in the internal DMA driver. Also
-* avoided compiler warnings by initializing Result in the
-* interrupt service routines.
-* 1.00c rpm 03/26/03 Fixed a problem in the interrupt service routines where
-* the interrupt status was toggled clear after a call to
-* ErrorHandler, but if ErrorHandler reset the device the
-* toggle actually asserted the interrupt because the
-* reset had cleared it.
-* </pre>
-*
-******************************************************************************/
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-#include "xemac_i.h"
-#include "xio.h"
-#include "xbuf_descriptor.h"
-#include "xdma_channel.h"
-#include "xipif_v1_23_b.h" /* Uses v1.23b of the IPIF */
-
-/************************** Constant Definitions *****************************/
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Variable Definitions *****************************/
-
-/************************** Function Prototypes ******************************/
-
-static void HandleDmaRecvIntr(XEmac * InstancePtr);
-static void HandleDmaSendIntr(XEmac * InstancePtr);
-static void HandleEmacDmaIntr(XEmac * InstancePtr);
-
-/*****************************************************************************/
-/**
-*
-* Send an Ethernet frame using scatter-gather DMA. The caller attaches the
-* frame to one or more buffer descriptors, then calls this function once for
-* each descriptor. The caller is responsible for allocating and setting up the
-* descriptor. An entire Ethernet frame may or may not be contained within one
-* descriptor. This function simply inserts the descriptor into the scatter-
-* gather engine's transmit list. The caller is responsible for providing mutual
-* exclusion to guarantee that a frame is contiguous in the transmit list. The
-* buffer attached to the descriptor must be word-aligned.
-*
-* The driver updates the descriptor with the device control register before
-* being inserted into the transmit list. If this is the last descriptor in
-* the frame, the inserts are committed, which means the descriptors for this
-* frame are now available for transmission.
-*
-* It is assumed that the upper layer software supplies a correctly formatted
-* Ethernet frame, including the destination and source addresses, the
-* type/length field, and the data field. It is also assumed that upper layer
-* software does not append FCS at the end of the frame.
-*
-* The buffer attached to the descriptor must be word-aligned on the front end.
-*
-* This call is non-blocking. Notification of error or successful transmission
-* is done asynchronously through the send or error callback function.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param BdPtr is the address of a descriptor to be inserted into the transmit
-* ring.
-* @param Delay indicates whether to start the scatter-gather DMA channel
-* immediately, or whether to wait. This allows the user to build up a
-* list of more than one descriptor before starting the transmission of
-* the packets, which allows the application to keep up with DMA and have
-* a constant stream of frames being transmitted. Use XEM_SGDMA_NODELAY or
-* XEM_SGDMA_DELAY, defined in xemac.h, as the value of this argument. If
-* the user chooses to delay and build a list, the user must call this
-* function with the XEM_SGDMA_NODELAY option or call XEmac_Start() to
-* kick off the tranmissions.
-*
-* @return
-*
-* - XST_SUCCESS if the buffer was successfull sent
-* - XST_DEVICE_IS_STOPPED if the Ethernet MAC has not been started yet
-* - XST_NOT_SGDMA if the device is not in scatter-gather DMA mode
-* - XST_DMA_SG_LIST_FULL if the descriptor list for the DMA channel is full
-* - XST_DMA_SG_BD_LOCKED if the DMA channel cannot insert the descriptor into
-* the list because a locked descriptor exists at the insert point
-* - XST_DMA_SG_NOTHING_TO_COMMIT if even after inserting a descriptor into the
-* list, the DMA channel believes there are no new descriptors to commit. If
-* this is ever encountered, there is likely a thread mutual exclusion problem
-* on transmit.
-*
-* @note
-*
-* This function is not thread-safe. The user must provide mutually exclusive
-* access to this function if there are to be multiple threads that can call it.
-*
-* @internal
-*
-* A status that should never be returned from this function, although
-* the code is set up to handle it, is XST_DMA_SG_NO_LIST. Starting the device
-* requires a list to be created, and this function requires the device to be
-* started.
-*
-******************************************************************************/
-XStatus
-XEmac_SgSend(XEmac * InstancePtr, XBufDescriptor * BdPtr, int Delay)
-{
- XStatus Result;
- u32 BdControl;
-
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(BdPtr != NULL);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /*
- * Be sure the device is configured for scatter-gather DMA, then be sure
- * it is started.
- */
- if (!XEmac_mIsSgDma(InstancePtr)) {
- return XST_NOT_SGDMA;
- }
-
- /*
- * Set some descriptor control word defaults (source address increment
- * and local destination address) and the destination address
- * (the FIFO). These are the same for every transmit descriptor.
- */
- BdControl = XBufDescriptor_GetControl(BdPtr);
- XBufDescriptor_SetControl(BdPtr, BdControl | XEM_DFT_SEND_BD_MASK);
-
- XBufDescriptor_SetDestAddress(BdPtr,
- InstancePtr->BaseAddress +
- XEM_PFIFO_TXDATA_OFFSET);
-
- /*
- * Put the descriptor in the send list. The DMA component accesses data
- * here that can also be modified in interrupt context, so a critical
- * section is required.
- */
- XIIF_V123B_GINTR_DISABLE(InstancePtr->BaseAddress);
-
- Result = XDmaChannel_PutDescriptor(&InstancePtr->SendChannel, BdPtr);
- if (Result != XST_SUCCESS) {
- XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
- return Result;
- }
-
- /*
- * If this is the last buffer in the frame, commit the inserts and start
- * the DMA engine if necessary
- */
- if (XBufDescriptor_IsLastControl(BdPtr)) {
- Result = XDmaChannel_CommitPuts(&InstancePtr->SendChannel);
- if (Result != XST_SUCCESS) {
- XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
- return Result;
- }
-
- if (Delay == XEM_SGDMA_NODELAY) {
- /*
- * Start the DMA channel. Ignore the return status since we know the
- * list exists and has at least one entry and we don't care if the
- * channel is already started. The DMA component accesses data here
- * that can be modified at interrupt or task levels, so a critical
- * section is required.
- */
- (void) XDmaChannel_SgStart(&InstancePtr->SendChannel);
- }
- }
-
- XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
-
- return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/**
-*
-* Add a descriptor, with an attached empty buffer, into the receive descriptor
-* list. The buffer attached to the descriptor must be word-aligned. This is
-* used by the upper layer software during initialization when first setting up
-* the receive descriptors, and also during reception of frames to replace
-* filled buffers with empty buffers. This function can be called when the
-* device is started or stopped. Note that it does start the scatter-gather DMA
-* engine. Although this is not necessary during initialization, it is not a
-* problem during initialization because the MAC receiver is not yet started.
-*
-* The buffer attached to the descriptor must be word-aligned on both the front
-* end and the back end.
-*
-* Notification of received frames are done asynchronously through the receive
-* callback function.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param BdPtr is a pointer to the buffer descriptor that will be added to the
-* descriptor list.
-*
-* @return
-*
-* - XST_SUCCESS if a descriptor was successfully returned to the driver
-* - XST_NOT_SGDMA if the device is not in scatter-gather DMA mode
-* - XST_DMA_SG_LIST_FULL if the receive descriptor list is full
-* - XST_DMA_SG_BD_LOCKED if the DMA channel cannot insert the descriptor into
-* the list because a locked descriptor exists at the insert point.
-* - XST_DMA_SG_NOTHING_TO_COMMIT if even after inserting a descriptor into the
-* list, the DMA channel believes there are no new descriptors to commit.
-*
-* @internal
-*
-* A status that should never be returned from this function, although
-* the code is set up to handle it, is XST_DMA_SG_NO_LIST. Starting the device
-* requires a list to be created, and this function requires the device to be
-* started.
-*
-******************************************************************************/
-XStatus
-XEmac_SgRecv(XEmac * InstancePtr, XBufDescriptor * BdPtr)
-{
- XStatus Result;
- u32 BdControl;
-
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(BdPtr != NULL);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /*
- * Be sure the device is configured for scatter-gather DMA
- */
- if (!XEmac_mIsSgDma(InstancePtr)) {
- return XST_NOT_SGDMA;
- }
-
- /*
- * Set some descriptor control word defaults (destination address increment
- * and local source address) and the source address (the FIFO). These are
- * the same for every receive descriptor.
- */
- BdControl = XBufDescriptor_GetControl(BdPtr);
- XBufDescriptor_SetControl(BdPtr, BdControl | XEM_DFT_RECV_BD_MASK);
- XBufDescriptor_SetSrcAddress(BdPtr,
- InstancePtr->BaseAddress +
- XEM_PFIFO_RXDATA_OFFSET);
-
- /*
- * Put the descriptor into the channel's descriptor list and commit.
- * Although this function is likely called within interrupt context, there
- * is the possibility that the upper layer software queues it to a task.
- * In this case, a critical section is needed here to protect shared data
- * in the DMA component.
- */
- XIIF_V123B_GINTR_DISABLE(InstancePtr->BaseAddress);
-
- Result = XDmaChannel_PutDescriptor(&InstancePtr->RecvChannel, BdPtr);
- if (Result != XST_SUCCESS) {
- XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
- return Result;
- }
-
- Result = XDmaChannel_CommitPuts(&InstancePtr->RecvChannel);
- if (Result != XST_SUCCESS) {
- XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
- return Result;
- }
-
- /*
- * Start the DMA channel. Ignore the return status since we know the list
- * exists and has at least one entry and we don't care if the channel is
- * already started. The DMA component accesses data here that can be
- * modified at interrupt or task levels, so a critical section is required.
- */
- (void) XDmaChannel_SgStart(&InstancePtr->RecvChannel);
-
- XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
-
- return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/**
-*
-* The interrupt handler for the Ethernet driver when configured with scatter-
-* gather DMA.
-*
-* Get the interrupt status from the IpIf to determine the source of the
-* interrupt. The source can be: MAC, Recv Packet FIFO, Send Packet FIFO, Recv
-* DMA channel, or Send DMA channel. The packet FIFOs only interrupt during
-* "deadlock" conditions.
-*
-* @param InstancePtr is a pointer to the XEmac instance that just interrupted.
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-void
-XEmac_IntrHandlerDma(void *InstancePtr)
-{
- u32 IntrStatus;
- XEmac *EmacPtr = (XEmac *) InstancePtr;
-
- EmacPtr->Stats.TotalIntrs++;
-
- /*
- * Get the interrupt status from the IPIF. There is no clearing of
- * interrupts in the IPIF. Interrupts must be cleared at the source.
- */
- IntrStatus = XIIF_V123B_READ_DIPR(EmacPtr->BaseAddress);
-
- /*
- * See which type of interrupt is being requested, and service it
- */
- if (IntrStatus & XEM_IPIF_RECV_DMA_MASK) { /* Receive DMA interrupt */
- EmacPtr->Stats.RecvInterrupts++;
- HandleDmaRecvIntr(EmacPtr);
- }
-
- if (IntrStatus & XEM_IPIF_SEND_DMA_MASK) { /* Send DMA interrupt */
- EmacPtr->Stats.XmitInterrupts++;
- HandleDmaSendIntr(EmacPtr);
- }
-
- if (IntrStatus & XEM_IPIF_EMAC_MASK) { /* MAC interrupt */
- EmacPtr->Stats.EmacInterrupts++;
- HandleEmacDmaIntr(EmacPtr);
- }
-
- if (IntrStatus & XEM_IPIF_RECV_FIFO_MASK) { /* Receive FIFO interrupt */
- EmacPtr->Stats.RecvInterrupts++;
- XEmac_CheckFifoRecvError(EmacPtr);
- }
-
- if (IntrStatus & XEM_IPIF_SEND_FIFO_MASK) { /* Send FIFO interrupt */
- EmacPtr->Stats.XmitInterrupts++;
- XEmac_CheckFifoSendError(EmacPtr);
- }
-
- if (IntrStatus & XIIF_V123B_ERROR_MASK) {
- /*
- * An error occurred internal to the IPIF. This is more of a debug and
- * integration issue rather than a production error. Don't do anything
- * other than clear it, which provides a spot for software to trap
- * on the interrupt and begin debugging.
- */
- XIIF_V123B_WRITE_DISR(EmacPtr->BaseAddress,
- XIIF_V123B_ERROR_MASK);
- }
-}
-
-/*****************************************************************************/
-/**
-*
-* Set the packet count threshold for this device. The device must be stopped
-* before setting the threshold. The packet count threshold is used for interrupt
-* coalescing, which reduces the frequency of interrupts from the device to the
-* processor. In this case, the scatter-gather DMA engine only interrupts when
-* the packet count threshold is reached, instead of interrupting for each packet.
-* A packet is a generic term used by the scatter-gather DMA engine, and is
-* equivalent to an Ethernet frame in our case.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param Direction indicates the channel, send or receive, from which the
-* threshold register is read.
-* @param Threshold is the value of the packet threshold count used during
-* interrupt coalescing. A value of 0 disables the use of packet threshold
-* by the hardware.
-*
-* @return
-*
-* - XST_SUCCESS if the threshold was successfully set
-* - XST_NOT_SGDMA if the MAC is not configured for scatter-gather DMA
-* - XST_DEVICE_IS_STARTED if the device has not been stopped
-* - XST_INVALID_PARAM if the Direction parameter is invalid. Turning on
-* asserts would also catch this error.
-*
-* @note
-*
-* The packet threshold could be set to larger than the number of descriptors
-* allocated to the DMA channel. In this case, the wait bound will take over
-* and always indicate data arrival. There was a check in this function that
-* returned an error if the treshold was larger than the number of descriptors,
-* but that was removed because users would then have to set the threshold
-* only after they set descriptor space, which is an order dependency that
-* caused confustion.
-*
-******************************************************************************/
-XStatus
-XEmac_SetPktThreshold(XEmac * InstancePtr, u32 Direction, u8 Threshold)
-{
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(Direction == XEM_SEND || Direction == XEM_RECV);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /*
- * Be sure device is configured for scatter-gather DMA and has been stopped
- */
- if (!XEmac_mIsSgDma(InstancePtr)) {
- return XST_NOT_SGDMA;
- }
-
- if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) {
- return XST_DEVICE_IS_STARTED;
- }
-
- /*
- * Based on the direction, set the packet threshold in the
- * corresponding DMA channel component. Default to the receive
- * channel threshold register (if an invalid Direction is passed).
- */
- switch (Direction) {
- case XEM_SEND:
- return XDmaChannel_SetPktThreshold(&InstancePtr->SendChannel,
- Threshold);
-
- case XEM_RECV:
- return XDmaChannel_SetPktThreshold(&InstancePtr->RecvChannel,
- Threshold);
-
- default:
- return XST_INVALID_PARAM;
- }
-}
-
-/*****************************************************************************/
-/**
-*
-* Get the value of the packet count threshold for this driver/device. The packet
-* count threshold is used for interrupt coalescing, which reduces the frequency
-* of interrupts from the device to the processor. In this case, the
-* scatter-gather DMA engine only interrupts when the packet count threshold is
-* reached, instead of interrupting for each packet. A packet is a generic term
-* used by the scatter-gather DMA engine, and is equivalent to an Ethernet frame
-* in our case.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param Direction indicates the channel, send or receive, from which the
-* threshold register is read.
-* @param ThreshPtr is a pointer to the byte into which the current value of the
-* packet threshold register will be copied. An output parameter. A value
-* of 0 indicates the use of packet threshold by the hardware is disabled.
-*
-* @return
-*
-* - XST_SUCCESS if the packet threshold was retrieved successfully
-* - XST_NOT_SGDMA if the MAC is not configured for scatter-gather DMA
-* - XST_INVALID_PARAM if the Direction parameter is invalid. Turning on
-* asserts would also catch this error.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XEmac_GetPktThreshold(XEmac * InstancePtr, u32 Direction, u8 * ThreshPtr)
-{
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(Direction == XEM_SEND || Direction == XEM_RECV);
- XASSERT_NONVOID(ThreshPtr != NULL);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- if (!XEmac_mIsSgDma(InstancePtr)) {
- return XST_NOT_SGDMA;
- }
-
- /*
- * Based on the direction, return the packet threshold set in the
- * corresponding DMA channel component. Default to the value in
- * the receive channel threshold register (if an invalid Direction
- * is passed).
- */
- switch (Direction) {
- case XEM_SEND:
- *ThreshPtr =
- XDmaChannel_GetPktThreshold(&InstancePtr->SendChannel);
- break;
-
- case XEM_RECV:
- *ThreshPtr =
- XDmaChannel_GetPktThreshold(&InstancePtr->RecvChannel);
- break;
-
- default:
- return XST_INVALID_PARAM;
- }
-
- return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/**
-*
-* Set the packet wait bound timer for this driver/device. The device must be
-* stopped before setting the timer value. The packet wait bound is used during
-* interrupt coalescing to trigger an interrupt when not enough packets have been
-* received to reach the packet count threshold. A packet is a generic term used
-* by the scatter-gather DMA engine, and is equivalent to an Ethernet frame in
-* our case. The timer is in milliseconds.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param Direction indicates the channel, send or receive, from which the
-* threshold register is read.
-* @param TimerValue is the value of the packet wait bound used during interrupt
-* coalescing. It is in milliseconds in the range 0 - 1023. A value of 0
-* disables the packet wait bound timer.
-*
-* @return
-*
-* - XST_SUCCESS if the packet wait bound was set successfully
-* - XST_NOT_SGDMA if the MAC is not configured for scatter-gather DMA
-* - XST_DEVICE_IS_STARTED if the device has not been stopped
-* - XST_INVALID_PARAM if the Direction parameter is invalid. Turning on
-* asserts would also catch this error.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XEmac_SetPktWaitBound(XEmac * InstancePtr, u32 Direction, u32 TimerValue)
-{
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(Direction == XEM_SEND || Direction == XEM_RECV);
- XASSERT_NONVOID(TimerValue <= XEM_SGDMA_MAX_WAITBOUND);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /*
- * Be sure device is configured for scatter-gather DMA and has been stopped
- */
- if (!XEmac_mIsSgDma(InstancePtr)) {
- return XST_NOT_SGDMA;
- }
-
- if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) {
- return XST_DEVICE_IS_STARTED;
- }
-
- /*
- * Based on the direction, set the packet wait bound in the
- * corresponding DMA channel component. Default to the receive
- * channel wait bound register (if an invalid Direction is passed).
- */
- switch (Direction) {
- case XEM_SEND:
- XDmaChannel_SetPktWaitBound(&InstancePtr->SendChannel,
- TimerValue);
- break;
-
- case XEM_RECV:
- XDmaChannel_SetPktWaitBound(&InstancePtr->RecvChannel,
- TimerValue);
- break;
-
- default:
- return XST_INVALID_PARAM;
- }
-
- return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/**
-*
-* Get the packet wait bound timer for this driver/device. The packet wait bound
-* is used during interrupt coalescing to trigger an interrupt when not enough
-* packets have been received to reach the packet count threshold. A packet is a
-* generic term used by the scatter-gather DMA engine, and is equivalent to an
-* Ethernet frame in our case. The timer is in milliseconds.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param Direction indicates the channel, send or receive, from which the
-* threshold register is read.
-* @param WaitPtr is a pointer to the byte into which the current value of the
-* packet wait bound register will be copied. An output parameter. Units
-* are in milliseconds in the range 0 - 1023. A value of 0 indicates the
-* packet wait bound timer is disabled.
-*
-* @return
-*
-* - XST_SUCCESS if the packet wait bound was retrieved successfully
-* - XST_NOT_SGDMA if the MAC is not configured for scatter-gather DMA
-* - XST_INVALID_PARAM if the Direction parameter is invalid. Turning on
-* asserts would also catch this error.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XEmac_GetPktWaitBound(XEmac * InstancePtr, u32 Direction, u32 * WaitPtr)
-{
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(Direction == XEM_SEND || Direction == XEM_RECV);
- XASSERT_NONVOID(WaitPtr != NULL);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- if (!XEmac_mIsSgDma(InstancePtr)) {
- return XST_NOT_SGDMA;
- }
-
- /*
- * Based on the direction, return the packet wait bound set in the
- * corresponding DMA channel component. Default to the value in
- * the receive channel wait bound register (if an invalid Direction
- * is passed).
- */
- switch (Direction) {
- case XEM_SEND:
- *WaitPtr =
- XDmaChannel_GetPktWaitBound(&InstancePtr->SendChannel);
- break;
-
- case XEM_RECV:
- *WaitPtr =
- XDmaChannel_GetPktWaitBound(&InstancePtr->RecvChannel);
- break;
-
- default:
- return XST_INVALID_PARAM;
- }
-
- return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/**
-*
-* Give the driver the memory space to be used for the scatter-gather DMA
-* receive descriptor list. This function should only be called once, during
-* initialization of the Ethernet driver. The memory space must be big enough
-* to hold some number of descriptors, depending on the needs of the system.
-* The xemac.h file defines minimum and default numbers of descriptors
-* which can be used to allocate this memory space.
-*
-* The memory space must be word-aligned. An assert will occur if asserts are
-* turned on and the memory is not word-aligned.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param MemoryPtr is a pointer to the word-aligned memory.
-* @param ByteCount is the length, in bytes, of the memory space.
-*
-* @return
-*
-* - XST_SUCCESS if the space was initialized successfully
-* - XST_NOT_SGDMA if the MAC is not configured for scatter-gather DMA
-* - XST_DMA_SG_LIST_EXISTS if this list space has already been created
-*
-* @note
-*
-* If the device is configured for scatter-gather DMA, this function must be
-* called AFTER the XEmac_Initialize() function because the DMA channel
-* components must be initialized before the memory space is set.
-*
-******************************************************************************/
-XStatus
-XEmac_SetSgRecvSpace(XEmac * InstancePtr, u32 * MemoryPtr, u32 ByteCount)
-{
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(MemoryPtr != NULL);
- XASSERT_NONVOID(ByteCount != 0);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- if (!XEmac_mIsSgDma(InstancePtr)) {
- return XST_NOT_SGDMA;
- }
-
- return XDmaChannel_CreateSgList(&InstancePtr->RecvChannel, MemoryPtr,
- ByteCount);
-}
-
-/*****************************************************************************/
-/**
-*
-* Give the driver the memory space to be used for the scatter-gather DMA
-* transmit descriptor list. This function should only be called once, during
-* initialization of the Ethernet driver. The memory space must be big enough
-* to hold some number of descriptors, depending on the needs of the system.
-* The xemac.h file defines minimum and default numbers of descriptors
-* which can be used to allocate this memory space.
-*
-* The memory space must be word-aligned. An assert will occur if asserts are
-* turned on and the memory is not word-aligned.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param MemoryPtr is a pointer to the word-aligned memory.
-* @param ByteCount is the length, in bytes, of the memory space.
-*
-* @return
-*
-* - XST_SUCCESS if the space was initialized successfully
-* - XST_NOT_SGDMA if the MAC is not configured for scatter-gather DMA
-* - XST_DMA_SG_LIST_EXISTS if this list space has already been created
-*
-* @note
-*
-* If the device is configured for scatter-gather DMA, this function must be
-* called AFTER the XEmac_Initialize() function because the DMA channel
-* components must be initialized before the memory space is set.
-*
-******************************************************************************/
-XStatus
-XEmac_SetSgSendSpace(XEmac * InstancePtr, u32 * MemoryPtr, u32 ByteCount)
-{
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(MemoryPtr != NULL);
- XASSERT_NONVOID(ByteCount != 0);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- if (!XEmac_mIsSgDma(InstancePtr)) {
- return XST_NOT_SGDMA;
- }
-
- return XDmaChannel_CreateSgList(&InstancePtr->SendChannel, MemoryPtr,
- ByteCount);
-}
-
-/*****************************************************************************/
-/**
-*
-* Set the callback function for handling received frames in scatter-gather DMA
-* mode. The upper layer software should call this function during
-* initialization. The callback is called once per frame received. The head of
-* a descriptor list is passed in along with the number of descriptors in the
-* list. Before leaving the callback, the upper layer software should attach a
-* new buffer to each descriptor in the list.
-*
-* The callback is invoked by the driver within interrupt context, so it needs
-* to do its job quickly. Sending the received frame up the protocol stack
-* should be done at task-level. If there are other potentially slow operations
-* within the callback, these too should be done at task-level.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param CallBackRef is a reference pointer to be passed back to the adapter in
-* the callback. This helps the adapter correlate the callback to a
-* particular driver.
-* @param FuncPtr is the pointer to the callback function.
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-void
-XEmac_SetSgRecvHandler(XEmac * InstancePtr, void *CallBackRef,
- XEmac_SgHandler FuncPtr)
-{
- /*
- * Asserted IsDmaSg here instead of run-time check because there is really
- * no ill-effects of setting these when not configured for scatter-gather.
- */
- XASSERT_VOID(InstancePtr != NULL);
- XASSERT_VOID(FuncPtr != NULL);
- XASSERT_VOID(XEmac_mIsSgDma(InstancePtr));
- XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- InstancePtr->SgRecvHandler = FuncPtr;
- InstancePtr->SgRecvRef = CallBackRef;
-}
-
-/*****************************************************************************/
-/**
-*
-* Set the callback function for handling confirmation of transmitted frames in
-* scatter-gather DMA mode. The upper layer software should call this function
-* during initialization. The callback is called once per frame sent. The head
-* of a descriptor list is passed in along with the number of descriptors in
-* the list. The callback is responsible for freeing buffers attached to these
-* descriptors.
-*
-* The callback is invoked by the driver within interrupt context, so it needs
-* to do its job quickly. If there are potentially slow operations within the
-* callback, these should be done at task-level.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param CallBackRef is a reference pointer to be passed back to the adapter in
-* the callback. This helps the adapter correlate the callback to a
-* particular driver.
-* @param FuncPtr is the pointer to the callback function.
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-void
-XEmac_SetSgSendHandler(XEmac * InstancePtr, void *CallBackRef,
- XEmac_SgHandler FuncPtr)
-{
- /*
- * Asserted IsDmaSg here instead of run-time check because there is really
- * no ill-effects of setting these when not configured for scatter-gather.
- */
- XASSERT_VOID(InstancePtr != NULL);
- XASSERT_VOID(FuncPtr != NULL);
- XASSERT_VOID(XEmac_mIsSgDma(InstancePtr));
- XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- InstancePtr->SgSendHandler = FuncPtr;
- InstancePtr->SgSendRef = CallBackRef;
-}
-
-/*****************************************************************************/
-/*
-*
-* Handle an interrupt from the DMA receive channel. DMA interrupts are:
-*
-* - DMA error. DMA encountered a bus error or timeout. This is a fatal error
-* that requires reset of the channel. The driver calls the error handler
-* of the upper layer software with an error code indicating the device should
-* be reset.
-* - Packet count threshold reached. For scatter-gather operations, indicates
-* the threshold for the number of packets not serviced by software has been
-* reached. The driver behaves as follows:
-* - Get the value of the packet counter, which tells us how many packets
-* are ready to be serviced
-* - For each packet
-* - For each descriptor, remove it from the scatter-gather list
-* - Check for the last descriptor in the frame, and if set
-* - Bump frame statistics
-* - Call the scatter-gather receive callback function
-* - Decrement the packet counter by one
-* Note that there are no receive errors reported in the status word of
-* the buffer descriptor. If receive errors occur, the MAC drops the
-* packet, and we only find out about the errors through various error
-* count registers.
-* - Packet wait bound reached. For scatter-gather, indicates the time to wait
-* for the next packet has expired. The driver follows the same logic as when
-* the packet count threshold interrupt is received.
-* - Scatter-gather end acknowledge. Hardware has reached the end of the
-* descriptor list. The driver follows the same logic as when the packet count
-* threshold interrupt is received. In addition, the driver restarts the DMA
-* scatter-gather channel in case there are newly inserted descriptors.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-*
-* @return
-*
-* Although the function returns void, there are asynchronous errors that can
-* be generated (by calling the ErrorHandler) from this function. These are:
-* - XST_DMA_SG_LIST_EMPTY indicates we tried to get a buffer descriptor from the
-* DMA channel, but there was not one ready for software.
-* - XST_DMA_ERROR indicates a DMA bus error or timeout occurred. This is a fatal
-* error that requires reset.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-static void
-HandleDmaRecvIntr(XEmac * InstancePtr)
-{
- u32 IntrStatus;
-
- /*
- * Read the interrupt status
- */
- IntrStatus = XDmaChannel_GetIntrStatus(&InstancePtr->RecvChannel);
-
- /*
- * For packet threshold or wait bound interrupts, process desciptors. Also
- * process descriptors on a SG end acknowledgement, which means the end of
- * the descriptor list has been reached by the hardware. For receive, this
- * is potentially trouble since it means the descriptor list is full,
- * unless software can process enough packets quickly enough so the
- * hardware has room to put new packets.
- */
- if (IntrStatus & (XDC_IXR_PKT_THRESHOLD_MASK |
- XDC_IXR_PKT_WAIT_BOUND_MASK | XDC_IXR_SG_END_MASK)) {
- XStatus Result = XST_SUCCESS;
- u32 NumFrames;
- u32 NumProcessed;
- u32 NumBuffers;
- u32 NumBytes;
- u32 IsLast;
- XBufDescriptor *FirstBdPtr;
- XBufDescriptor *BdPtr;
-
- /*
- * Get the number of unserviced packets
- */
- NumFrames = XDmaChannel_GetPktCount(&InstancePtr->RecvChannel);
-
- for (NumProcessed = 0; NumProcessed < NumFrames; NumProcessed++) {
- IsLast = FALSE;
- FirstBdPtr = NULL;
- NumBuffers = 0;
- NumBytes = 0;
-
- /*
- * For each packet, get the descriptor from the list. On the
- * last one in the frame, make the callback to the upper layer.
- */
- while (!IsLast) {
- Result =
- XDmaChannel_GetDescriptor(&InstancePtr->
- RecvChannel,
- &BdPtr);
- if (Result != XST_SUCCESS) {
- /*
- * An error getting a buffer descriptor from the list.
- * This should not happen, but if it does, report it to
- * the error callback and break out of the loops to service
- * other interrupts.
- */
- InstancePtr->ErrorHandler(InstancePtr->
- ErrorRef,
- Result);
- break;
- }
-
- /*
- * Keep a pointer to the first descriptor in the list, as it
- * will be passed to the upper layers in a bit. By the fact
- * that we received this packet means no errors occurred, so
- * no need to check the device status word for errors.
- */
- if (FirstBdPtr == NULL) {
- FirstBdPtr = BdPtr;
- }
-
- NumBytes += XBufDescriptor_GetLength(BdPtr);
-
- /*
- * Check to see if this is the last descriptor in the frame,
- * and if so, set the IsLast flag to get out of the loop.
- */
- if (XBufDescriptor_IsLastStatus(BdPtr)) {
- IsLast = TRUE;
- }
-
- /*
- * Bump the number of buffers in this packet
- */
- NumBuffers++;
-
- } /* end while loop */
-
- /*
- * Check for error that occurred inside the while loop, and break
- * out of the for loop if there was one so other interrupts can
- * be serviced.
- */
- if (Result != XST_SUCCESS) {
- break;
- }
-
- InstancePtr->Stats.RecvFrames++;
- InstancePtr->Stats.RecvBytes += NumBytes;
-
- /*
- * Make the callback to the upper layers, passing it the first
- * descriptor in the packet and the number of descriptors in the
- * packet.
- */
- InstancePtr->SgRecvHandler(InstancePtr->SgRecvRef,
- FirstBdPtr, NumBuffers);
-
- /*
- * Decrement the packet count register to reflect the fact we
- * just processed a packet
- */
- XDmaChannel_DecrementPktCount(&InstancePtr->
- RecvChannel);
-
- } /* end for loop */
-
- /*
- * If the interrupt was an end-ack, check the descriptor list again to
- * see if it is empty. If not, go ahead and restart the scatter-gather
- * channel. This is to fix a possible race condition where, on receive,
- * the driver attempted to start a scatter-gather channel that was
- * already started, which resulted in no action from the XDmaChannel
- * component. But, just after the XDmaChannel component saw that the
- * hardware was already started, the hardware stopped because it
- * reached the end of the list. In that case, this interrupt is
- * generated and we can restart the hardware here.
- */
- if (IntrStatus & XDC_IXR_SG_END_MASK) {
- /*
- * Ignore the return status since we know the list exists and we
- * don't care if the list is empty or the channel is already started.
- */
- (void) XDmaChannel_SgStart(&InstancePtr->RecvChannel);
- }
- }
-
- /*
- * All interrupts are handled (except the error below) so acknowledge
- * (clear) the interrupts by writing the value read above back to the status
- * register. The packet count interrupt must be acknowledged after the
- * decrement, otherwise it will come right back. We clear the interrupts
- * before we handle the error interrupt because the ErrorHandler should
- * result in a reset, which clears the interrupt status register. So we
- * don't want to toggle the interrupt back on by writing the interrupt
- * status register with an old value after a reset.
- */
- XDmaChannel_SetIntrStatus(&InstancePtr->RecvChannel, IntrStatus);
-
- /*
- * Check for DMA errors and call the error callback function if an error
- * occurred (DMA bus or timeout error), which should result in a reset of
- * the device by the upper layer software.
- */
- if (IntrStatus & XDC_IXR_DMA_ERROR_MASK) {
- InstancePtr->Stats.DmaErrors++;
- InstancePtr->ErrorHandler(InstancePtr->ErrorRef, XST_DMA_ERROR);
- }
-}
-
-/*****************************************************************************/
-/*
-*
-* Handle an interrupt from the DMA send channel. DMA interrupts are:
-*
-* - DMA error. DMA encountered a bus error or timeout. This is a fatal error
-* that requires reset of the channel. The driver calls the error handler
-* of the upper layer software with an error code indicating the device should
-* be reset.
-* - Packet count threshold reached. For scatter-gather operations, indicates
-* the threshold for the number of packets not serviced by software has been
-* reached. The driver behaves as follows:
-* - Get the value of the packet counter, which tells us how many packets
-* are ready to be serviced
-* - For each packet
-* - For each descriptor, remove it from the scatter-gather list
-* - Check for the last descriptor in the frame, and if set
-* - Bump frame statistics
-* - Call the scatter-gather receive callback function
-* - Decrement the packet counter by one
-* Note that there are no receive errors reported in the status word of
-* the buffer descriptor. If receive errors occur, the MAC drops the
-* packet, and we only find out about the errors through various error
-* count registers.
-* - Packet wait bound reached. For scatter-gather, indicates the time to wait
-* for the next packet has expired. The driver follows the same logic as when
-* the packet count threshold interrupt is received.
-* - Scatter-gather end acknowledge. Hardware has reached the end of the
-* descriptor list. The driver follows the same logic as when the packet count
-* threshold interrupt is received. In addition, the driver restarts the DMA
-* scatter-gather channel in case there are newly inserted descriptors.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-*
-* @return
-*
-* Although the function returns void, there are asynchronous errors
-* that can be generated from this function. These are:
-* - XST_DMA_SG_LIST_EMPTY indicates we tried to get a buffer descriptor from
-* the DMA channel, but there was not one ready for software.
-* - XST_DMA_ERROR indicates a DMA bus error or timeout occurred. This is a
-* fatal error that requires reset.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-static void
-HandleDmaSendIntr(XEmac * InstancePtr)
-{
- u32 IntrStatus;
-
- /*
- * Read the interrupt status
- */
- IntrStatus = XDmaChannel_GetIntrStatus(&InstancePtr->SendChannel);
-
- /*
- * For packet threshold or wait bound interrupt, process descriptors. Also
- * process descriptors on a SG end acknowledgement, which means the end of
- * the descriptor list has been reached by the hardware. For transmit,
- * this is a normal condition during times of light traffic. In fact, the
- * wait bound interrupt may be masked for transmit since the end-ack would
- * always occur before the wait bound expires.
- */
- if (IntrStatus & (XDC_IXR_PKT_THRESHOLD_MASK |
- XDC_IXR_PKT_WAIT_BOUND_MASK | XDC_IXR_SG_END_MASK)) {
- XStatus Result = XST_SUCCESS;
- u32 NumFrames;
- u32 NumProcessed;
- u32 NumBuffers;
- u32 NumBytes;
- u32 IsLast;
- XBufDescriptor *FirstBdPtr;
- XBufDescriptor *BdPtr;
-
- /*
- * Get the number of unserviced packets
- */
- NumFrames = XDmaChannel_GetPktCount(&InstancePtr->SendChannel);
-
- for (NumProcessed = 0; NumProcessed < NumFrames; NumProcessed++) {
- IsLast = FALSE;
- FirstBdPtr = NULL;
- NumBuffers = 0;
- NumBytes = 0;
-
- /*
- * For each frame, traverse the descriptor list and look for
- * errors. On the last one in the frame, make the callback.
- */
- while (!IsLast) {
- Result =
- XDmaChannel_GetDescriptor(&InstancePtr->
- SendChannel,
- &BdPtr);
- if (Result != XST_SUCCESS) {
- /*
- * An error getting a buffer descriptor from the list.
- * This should not happen, but if it does, report it to
- * the error callback and break out of the loops to service
- * other interrupts
- */
- InstancePtr->ErrorHandler(InstancePtr->
- ErrorRef,
- Result);
- break;
- }
-
- /*
- * Keep a pointer to the first descriptor in the list and
- * check the device status for errors. The device status is
- * only available in the first descriptor of a packet.
- */
- if (FirstBdPtr == NULL) {
- u32 XmitStatus;
-
- FirstBdPtr = BdPtr;
-
- XmitStatus =
- XBufDescriptor_GetDeviceStatus
- (BdPtr);
- if (XmitStatus &
- XEM_TSR_EXCESS_DEFERRAL_MASK) {
- InstancePtr->Stats.
- XmitExcessDeferral++;
- }
-
- if (XmitStatus &
- XEM_TSR_LATE_COLLISION_MASK) {
- InstancePtr->Stats.
- XmitLateCollisionErrors++;
- }
- }
-
- NumBytes += XBufDescriptor_GetLength(BdPtr);
-
- /*
- * Check to see if this is the last descriptor in the frame,
- * and if so, set the IsLast flag to get out of the loop. The
- * transmit channel must check the last bit in the control
- * word, not the status word (the DMA engine does not update
- * the last bit in the status word for the transmit direction).
- */
- if (XBufDescriptor_IsLastControl(BdPtr)) {
- IsLast = TRUE;
- }
-
- /*
- * Bump the number of buffers in this packet
- */
- NumBuffers++;
-
- } /* end while loop */
-
- /*
- * Check for error that occurred inside the while loop, and break
- * out of the for loop if there was one so other interrupts can
- * be serviced.
- */
- if (Result != XST_SUCCESS) {
- break;
- }
-
- InstancePtr->Stats.XmitFrames++;
- InstancePtr->Stats.XmitBytes += NumBytes;
-
- /*
- * Make the callback to the upper layers, passing it the first
- * descriptor in the packet and the number of descriptors in the
- * packet.
- */
- InstancePtr->SgSendHandler(InstancePtr->SgSendRef,
- FirstBdPtr, NumBuffers);
-
- /*
- * Decrement the packet count register to reflect the fact we
- * just processed a packet
- */
- XDmaChannel_DecrementPktCount(&InstancePtr->
- SendChannel);
-
- } /* end for loop */
-
- /*
- * If the interrupt was an end-ack, check the descriptor list again to
- * see if it is empty. If not, go ahead and restart the scatter-gather
- * channel. This is to fix a possible race condition where, on transmit,
- * the driver attempted to start a scatter-gather channel that was
- * already started, which resulted in no action from the XDmaChannel
- * component. But, just after the XDmaChannel component saw that the
- * hardware was already started, the hardware stopped because it
- * reached the end of the list. In that case, this interrupt is
- * generated and we can restart the hardware here.
- */
- if (IntrStatus & XDC_IXR_SG_END_MASK) {
- /*
- * Ignore the return status since we know the list exists and we
- * don't care if the list is empty or the channel is already started.
- */
- (void) XDmaChannel_SgStart(&InstancePtr->SendChannel);
- }
- }
-
- /*
- * All interrupts are handled (except the error below) so acknowledge
- * (clear) the interrupts by writing the value read above back to the status
- * register. The packet count interrupt must be acknowledged after the
- * decrement, otherwise it will come right back. We clear the interrupts
- * before we handle the error interrupt because the ErrorHandler should
- * result in a reset, which clears the interrupt status register. So we
- * don't want to toggle the interrupt back on by writing the interrupt
- * status register with an old value after a reset.
- */
- XDmaChannel_SetIntrStatus(&InstancePtr->SendChannel, IntrStatus);
-
- /*
- * Check for DMA errors and call the error callback function if an error
- * occurred (DMA bus or timeout error), which should result in a reset of
- * the device by the upper layer software.
- */
- if (IntrStatus & XDC_IXR_DMA_ERROR_MASK) {
- InstancePtr->Stats.DmaErrors++;
- InstancePtr->ErrorHandler(InstancePtr->ErrorRef, XST_DMA_ERROR);
- }
-}
-
-/*****************************************************************************/
-/*
-*
-* Handle an interrupt from the Ethernet MAC when configured with scatter-gather
-* DMA. The only interrupts handled in this case are errors.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-static void
-HandleEmacDmaIntr(XEmac * InstancePtr)
-{
- u32 IntrStatus;
-
- /*
- * When configured with DMA, the EMAC generates interrupts only when errors
- * occur. We clear the interrupts immediately so that any latched status
- * interrupt bits will reflect the true status of the device, and so any
- * pulsed interrupts (non-status) generated during the Isr will not be lost.
- */
- IntrStatus = XIIF_V123B_READ_IISR(InstancePtr->BaseAddress);
- XIIF_V123B_WRITE_IISR(InstancePtr->BaseAddress, IntrStatus);
-
- /*
- * Check the MAC for errors
- */
- XEmac_CheckEmacError(InstancePtr, IntrStatus);
-}
diff --git a/board/xilinx/xilinx_enet/xemac_l.h b/board/xilinx/xilinx_enet/xemac_l.h
deleted file mode 100644
index a463937..0000000
--- a/board/xilinx/xilinx_enet/xemac_l.h
+++ /dev/null
@@ -1,462 +0,0 @@
-/******************************************************************************
-*
-* Author: Xilinx, Inc.
-*
-*
-* This program is free software; you can redistribute it and/or modify it
-* under the terms of the GNU General Public License as published by the
-* Free Software Foundation; either version 2 of the License, or (at your
-* option) any later version.
-*
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-* FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-* Xilinx hardware products are not intended for use in life support
-* appliances, devices, or systems. Use in such applications is
-* expressly prohibited.
-*
-*
-* (c) Copyright 2002-2004 Xilinx Inc.
-* All rights reserved.
-*
-*
-* You should have received a copy of the GNU General Public License along
-* with this program; if not, write to the Free Software Foundation, Inc.,
-* 675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/**
-*
-* @file xemac_l.h
-*
-* This header file contains identifiers and low-level driver functions (or
-* macros) that can be used to access the device. High-level driver functions
-* are defined in xemac.h.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver Who Date Changes
-* ----- ---- -------- -----------------------------------------------
-* 1.00b rpm 04/26/02 First release
-* 1.00b rmm 09/23/02 Added XEmac_mPhyReset macro
-* 1.00c rpm 12/05/02 New version includes support for simple DMA
-* </pre>
-*
-******************************************************************************/
-
-#ifndef XEMAC_L_H /* prevent circular inclusions */
-#define XEMAC_L_H /* by using protection macros */
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-#include "xio.h"
-
-/************************** Constant Definitions *****************************/
-
-/* Offset of the MAC registers from the IPIF base address */
-#define XEM_REG_OFFSET 0x1100UL
-
-/*
- * Register offsets for the Ethernet MAC. Each register is 32 bits.
- */
-#define XEM_EMIR_OFFSET (XEM_REG_OFFSET + 0x0) /* EMAC Module ID */
-#define XEM_ECR_OFFSET (XEM_REG_OFFSET + 0x4) /* MAC Control */
-#define XEM_IFGP_OFFSET (XEM_REG_OFFSET + 0x8) /* Interframe Gap */
-#define XEM_SAH_OFFSET (XEM_REG_OFFSET + 0xC) /* Station addr, high */
-#define XEM_SAL_OFFSET (XEM_REG_OFFSET + 0x10) /* Station addr, low */
-#define XEM_MGTCR_OFFSET (XEM_REG_OFFSET + 0x14) /* MII mgmt control */
-#define XEM_MGTDR_OFFSET (XEM_REG_OFFSET + 0x18) /* MII mgmt data */
-#define XEM_RPLR_OFFSET (XEM_REG_OFFSET + 0x1C) /* Rx packet length */
-#define XEM_TPLR_OFFSET (XEM_REG_OFFSET + 0x20) /* Tx packet length */
-#define XEM_TSR_OFFSET (XEM_REG_OFFSET + 0x24) /* Tx status */
-#define XEM_RMFC_OFFSET (XEM_REG_OFFSET + 0x28) /* Rx missed frames */
-#define XEM_RCC_OFFSET (XEM_REG_OFFSET + 0x2C) /* Rx collisions */
-#define XEM_RFCSEC_OFFSET (XEM_REG_OFFSET + 0x30) /* Rx FCS errors */
-#define XEM_RAEC_OFFSET (XEM_REG_OFFSET + 0x34) /* Rx alignment errors */
-#define XEM_TEDC_OFFSET (XEM_REG_OFFSET + 0x38) /* Transmit excess
- * deferral cnt */
-
-/*
- * Register offsets for the IPIF components
- */
-#define XEM_ISR_OFFSET 0x20UL /* Interrupt status */
-
-#define XEM_DMA_OFFSET 0x2300UL
-#define XEM_DMA_SEND_OFFSET (XEM_DMA_OFFSET + 0x0) /* DMA send channel */
-#define XEM_DMA_RECV_OFFSET (XEM_DMA_OFFSET + 0x40) /* DMA recv channel */
-
-#define XEM_PFIFO_OFFSET 0x2000UL
-#define XEM_PFIFO_TXREG_OFFSET (XEM_PFIFO_OFFSET + 0x0) /* Tx registers */
-#define XEM_PFIFO_RXREG_OFFSET (XEM_PFIFO_OFFSET + 0x10) /* Rx registers */
-#define XEM_PFIFO_TXDATA_OFFSET (XEM_PFIFO_OFFSET + 0x100) /* Tx keyhole */
-#define XEM_PFIFO_RXDATA_OFFSET (XEM_PFIFO_OFFSET + 0x200) /* Rx keyhole */
-
-/*
- * EMAC Module Identification Register (EMIR)
- */
-#define XEM_EMIR_VERSION_MASK 0xFFFF0000UL /* Device version */
-#define XEM_EMIR_TYPE_MASK 0x0000FF00UL /* Device type */
-
-/*
- * EMAC Control Register (ECR)
- */
-#define XEM_ECR_FULL_DUPLEX_MASK 0x80000000UL /* Full duplex mode */
-#define XEM_ECR_XMIT_RESET_MASK 0x40000000UL /* Reset transmitter */
-#define XEM_ECR_XMIT_ENABLE_MASK 0x20000000UL /* Enable transmitter */
-#define XEM_ECR_RECV_RESET_MASK 0x10000000UL /* Reset receiver */
-#define XEM_ECR_RECV_ENABLE_MASK 0x08000000UL /* Enable receiver */
-#define XEM_ECR_PHY_ENABLE_MASK 0x04000000UL /* Enable PHY */
-#define XEM_ECR_XMIT_PAD_ENABLE_MASK 0x02000000UL /* Enable xmit pad insert */
-#define XEM_ECR_XMIT_FCS_ENABLE_MASK 0x01000000UL /* Enable xmit FCS insert */
-#define XEM_ECR_XMIT_ADDR_INSERT_MASK 0x00800000UL /* Enable xmit source addr
- * insertion */
-#define XEM_ECR_XMIT_ERROR_INSERT_MASK 0x00400000UL /* Insert xmit error */
-#define XEM_ECR_XMIT_ADDR_OVWRT_MASK 0x00200000UL /* Enable xmit source addr
- * overwrite */
-#define XEM_ECR_LOOPBACK_MASK 0x00100000UL /* Enable internal
- * loopback */
-#define XEM_ECR_RECV_STRIP_ENABLE_MASK 0x00080000UL /* Enable recv pad/fcs strip */
-#define XEM_ECR_UNICAST_ENABLE_MASK 0x00020000UL /* Enable unicast addr */
-#define XEM_ECR_MULTI_ENABLE_MASK 0x00010000UL /* Enable multicast addr */
-#define XEM_ECR_BROAD_ENABLE_MASK 0x00008000UL /* Enable broadcast addr */
-#define XEM_ECR_PROMISC_ENABLE_MASK 0x00004000UL /* Enable promiscuous mode */
-#define XEM_ECR_RECV_ALL_MASK 0x00002000UL /* Receive all frames */
-#define XEM_ECR_RESERVED2_MASK 0x00001000UL /* Reserved */
-#define XEM_ECR_MULTI_HASH_ENABLE_MASK 0x00000800UL /* Enable multicast hash */
-#define XEM_ECR_PAUSE_FRAME_MASK 0x00000400UL /* Interpret pause frames */
-#define XEM_ECR_CLEAR_HASH_MASK 0x00000200UL /* Clear hash table */
-#define XEM_ECR_ADD_HASH_ADDR_MASK 0x00000100UL /* Add hash table address */
-
-/*
- * Interframe Gap Register (IFGR)
- */
-#define XEM_IFGP_PART1_MASK 0xF8000000UL /* Interframe Gap Part1 */
-#define XEM_IFGP_PART1_SHIFT 27
-#define XEM_IFGP_PART2_MASK 0x07C00000UL /* Interframe Gap Part2 */
-#define XEM_IFGP_PART2_SHIFT 22
-
-/*
- * Station Address High Register (SAH)
- */
-#define XEM_SAH_ADDR_MASK 0x0000FFFFUL /* Station address high bytes */
-
-/*
- * Station Address Low Register (SAL)
- */
-#define XEM_SAL_ADDR_MASK 0xFFFFFFFFUL /* Station address low bytes */
-
-/*
- * MII Management Control Register (MGTCR)
- */
-#define XEM_MGTCR_START_MASK 0x80000000UL /* Start/Busy */
-#define XEM_MGTCR_RW_NOT_MASK 0x40000000UL /* Read/Write Not (direction) */
-#define XEM_MGTCR_PHY_ADDR_MASK 0x3E000000UL /* PHY address */
-#define XEM_MGTCR_PHY_ADDR_SHIFT 25 /* PHY address shift */
-#define XEM_MGTCR_REG_ADDR_MASK 0x01F00000UL /* Register address */
-#define XEM_MGTCR_REG_ADDR_SHIFT 20 /* Register addr shift */
-#define XEM_MGTCR_MII_ENABLE_MASK 0x00080000UL /* Enable MII from EMAC */
-#define XEM_MGTCR_RD_ERROR_MASK 0x00040000UL /* MII mgmt read error */
-
-/*
- * MII Management Data Register (MGTDR)
- */
-#define XEM_MGTDR_DATA_MASK 0x0000FFFFUL /* MII data */
-
-/*
- * Receive Packet Length Register (RPLR)
- */
-#define XEM_RPLR_LENGTH_MASK 0x0000FFFFUL /* Receive packet length */
-
-/*
- * Transmit Packet Length Register (TPLR)
- */
-#define XEM_TPLR_LENGTH_MASK 0x0000FFFFUL /* Transmit packet length */
-
-/*
- * Transmit Status Register (TSR)
- */
-#define XEM_TSR_EXCESS_DEFERRAL_MASK 0x80000000UL /* Transmit excess deferral */
-#define XEM_TSR_FIFO_UNDERRUN_MASK 0x40000000UL /* Packet FIFO underrun */
-#define XEM_TSR_ATTEMPTS_MASK 0x3E000000UL /* Transmission attempts */
-#define XEM_TSR_LATE_COLLISION_MASK 0x01000000UL /* Transmit late collision */
-
-/*
- * Receive Missed Frame Count (RMFC)
- */
-#define XEM_RMFC_DATA_MASK 0x0000FFFFUL
-
-/*
- * Receive Collision Count (RCC)
- */
-#define XEM_RCC_DATA_MASK 0x0000FFFFUL
-
-/*
- * Receive FCS Error Count (RFCSEC)
- */
-#define XEM_RFCSEC_DATA_MASK 0x0000FFFFUL
-
-/*
- * Receive Alignment Error Count (RALN)
- */
-#define XEM_RAEC_DATA_MASK 0x0000FFFFUL
-
-/*
- * Transmit Excess Deferral Count (TEDC)
- */
-#define XEM_TEDC_DATA_MASK 0x0000FFFFUL
-
-/*
- * EMAC Interrupt Registers (Status and Enable) masks. These registers are
- * part of the IPIF IP Interrupt registers
- */
-#define XEM_EIR_XMIT_DONE_MASK 0x00000001UL /* Xmit complete */
-#define XEM_EIR_RECV_DONE_MASK 0x00000002UL /* Recv complete */
-#define XEM_EIR_XMIT_ERROR_MASK 0x00000004UL /* Xmit error */
-#define XEM_EIR_RECV_ERROR_MASK 0x00000008UL /* Recv error */
-#define XEM_EIR_XMIT_SFIFO_EMPTY_MASK 0x00000010UL /* Xmit status fifo empty */
-#define XEM_EIR_RECV_LFIFO_EMPTY_MASK 0x00000020UL /* Recv length fifo empty */
-#define XEM_EIR_XMIT_LFIFO_FULL_MASK 0x00000040UL /* Xmit length fifo full */
-#define XEM_EIR_RECV_LFIFO_OVER_MASK 0x00000080UL /* Recv length fifo
- * overrun */
-#define XEM_EIR_RECV_LFIFO_UNDER_MASK 0x00000100UL /* Recv length fifo
- * underrun */
-#define XEM_EIR_XMIT_SFIFO_OVER_MASK 0x00000200UL /* Xmit status fifo
- * overrun */
-#define XEM_EIR_XMIT_SFIFO_UNDER_MASK 0x00000400UL /* Transmit status fifo
- * underrun */
-#define XEM_EIR_XMIT_LFIFO_OVER_MASK 0x00000800UL /* Transmit length fifo
- * overrun */
-#define XEM_EIR_XMIT_LFIFO_UNDER_MASK 0x00001000UL /* Transmit length fifo
- * underrun */
-#define XEM_EIR_XMIT_PAUSE_MASK 0x00002000UL /* Transmit pause pkt
- * received */
-#define XEM_EIR_RECV_DFIFO_OVER_MASK 0x00004000UL /* Receive data fifo
- * overrun */
-#define XEM_EIR_RECV_MISSED_FRAME_MASK 0x00008000UL /* Receive missed frame
- * error */
-#define XEM_EIR_RECV_COLLISION_MASK 0x00010000UL /* Receive collision
- * error */
-#define XEM_EIR_RECV_FCS_ERROR_MASK 0x00020000UL /* Receive FCS error */
-#define XEM_EIR_RECV_LEN_ERROR_MASK 0x00040000UL /* Receive length field
- * error */
-#define XEM_EIR_RECV_SHORT_ERROR_MASK 0x00080000UL /* Receive short frame
- * error */
-#define XEM_EIR_RECV_LONG_ERROR_MASK 0x00100000UL /* Receive long frame
- * error */
-#define XEM_EIR_RECV_ALIGN_ERROR_MASK 0x00200000UL /* Receive alignment
- * error */
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/*****************************************************************************
-*
-* Low-level driver macros and functions. The list below provides signatures
-* to help the user use the macros.
-*
-* u32 XEmac_mReadReg(u32 BaseAddress, int RegOffset)
-* void XEmac_mWriteReg(u32 BaseAddress, int RegOffset, u32 Mask)
-*
-* void XEmac_mSetControlReg(u32 BaseAddress, u32 Mask)
-* void XEmac_mSetMacAddress(u32 BaseAddress, u8 *AddressPtr)
-*
-* void XEmac_mEnable(u32 BaseAddress)
-* void XEmac_mDisable(u32 BaseAddress)
-*
-* u32 XEmac_mIsTxDone(u32 BaseAddress)
-* u32 XEmac_mIsRxEmpty(u32 BaseAddress)
-*
-* void XEmac_SendFrame(u32 BaseAddress, u8 *FramePtr, int Size)
-* int XEmac_RecvFrame(u32 BaseAddress, u8 *FramePtr)
-*
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*
-* Read the given register.
-*
-* @param BaseAddress is the base address of the device
-* @param RegOffset is the register offset to be read
-*
-* @return The 32-bit value of the register
-*
-* @note None.
-*
-*****************************************************************************/
-#define XEmac_mReadReg(BaseAddress, RegOffset) \
- XIo_In32((BaseAddress) + (RegOffset))
-
-/****************************************************************************/
-/**
-*
-* Write the given register.
-*
-* @param BaseAddress is the base address of the device
-* @param RegOffset is the register offset to be written
-* @param Data is the 32-bit value to write to the register
-*
-* @return None.
-*
-* @note None.
-*
-*****************************************************************************/
-#define XEmac_mWriteReg(BaseAddress, RegOffset, Data) \
- XIo_Out32((BaseAddress) + (RegOffset), (Data))
-
-/****************************************************************************/
-/**
-*
-* Set the contents of the control register. Use the XEM_ECR_* constants
-* defined above to create the bit-mask to be written to the register.
-*
-* @param BaseAddress is the base address of the device
-* @param Mask is the 16-bit value to write to the control register
-*
-* @return None.
-*
-* @note None.
-*
-*****************************************************************************/
-#define XEmac_mSetControlReg(BaseAddress, Mask) \
- XIo_Out32((BaseAddress) + XEM_ECR_OFFSET, (Mask))
-
-/****************************************************************************/
-/**
-*
-* Set the station address of the EMAC device.
-*
-* @param BaseAddress is the base address of the device
-* @param AddressPtr is a pointer to a 6-byte MAC address
-*
-* @return None.
-*
-* @note None.
-*
-*****************************************************************************/
-#define XEmac_mSetMacAddress(BaseAddress, AddressPtr) \
-{ \
- u32 MacAddr; \
- \
- MacAddr = ((AddressPtr)[0] << 8) | (AddressPtr)[1]; \
- XIo_Out32((BaseAddress) + XEM_SAH_OFFSET, MacAddr); \
- \
- MacAddr = ((AddressPtr)[2] << 24) | ((AddressPtr)[3] << 16) | \
- ((AddressPtr)[4] << 8) | (AddressPtr)[5]; \
- \
- XIo_Out32((BaseAddress) + XEM_SAL_OFFSET, MacAddr); \
-}
-
-/****************************************************************************/
-/**
-*
-* Enable the transmitter and receiver. Preserve the contents of the control
-* register.
-*
-* @param BaseAddress is the base address of the device
-*
-* @return None.
-*
-* @note None.
-*
-*****************************************************************************/
-#define XEmac_mEnable(BaseAddress) \
-{ \
- u32 Control; \
- Control = XIo_In32((BaseAddress) + XEM_ECR_OFFSET); \
- Control &= ~(XEM_ECR_XMIT_RESET_MASK | XEM_ECR_RECV_RESET_MASK); \
- Control |= (XEM_ECR_XMIT_ENABLE_MASK | XEM_ECR_RECV_ENABLE_MASK); \
- XIo_Out32((BaseAddress) + XEM_ECR_OFFSET, Control); \
-}
-
-/****************************************************************************/
-/**
-*
-* Disable the transmitter and receiver. Preserve the contents of the control
-* register.
-*
-* @param BaseAddress is the base address of the device
-*
-* @return None.
-*
-* @note None.
-*
-*****************************************************************************/
-#define XEmac_mDisable(BaseAddress) \
- XIo_Out32((BaseAddress) + XEM_ECR_OFFSET, \
- XIo_In32((BaseAddress) + XEM_ECR_OFFSET) & \
- ~(XEM_ECR_XMIT_ENABLE_MASK | XEM_ECR_RECV_ENABLE_MASK))
-
-/****************************************************************************/
-/**
-*
-* Check to see if the transmission is complete.
-*
-* @param BaseAddress is the base address of the device
-*
-* @return TRUE if it is done, or FALSE if it is not.
-*
-* @note None.
-*
-*****************************************************************************/
-#define XEmac_mIsTxDone(BaseAddress) \
- (XIo_In32((BaseAddress) + XEM_ISR_OFFSET) & XEM_EIR_XMIT_DONE_MASK)
-
-/****************************************************************************/
-/**
-*
-* Check to see if the receive FIFO is empty.
-*
-* @param BaseAddress is the base address of the device
-*
-* @return TRUE if it is empty, or FALSE if it is not.
-*
-* @note None.
-*
-*****************************************************************************/
-#define XEmac_mIsRxEmpty(BaseAddress) \
- (!(XIo_In32((BaseAddress) + XEM_ISR_OFFSET) & XEM_EIR_RECV_DONE_MASK))
-
-/****************************************************************************/
-/**
-*
-* Reset MII compliant PHY
-*
-* @param BaseAddress is the base address of the device
-*
-* @return None.
-*
-* @note None.
-*
-*****************************************************************************/
-#define XEmac_mPhyReset(BaseAddress) \
-{ \
- u32 Control; \
- Control = XIo_In32((BaseAddress) + XEM_ECR_OFFSET); \
- Control &= ~XEM_ECR_PHY_ENABLE_MASK; \
- XIo_Out32((BaseAddress) + XEM_ECR_OFFSET, Control); \
- Control |= XEM_ECR_PHY_ENABLE_MASK; \
- XIo_Out32((BaseAddress) + XEM_ECR_OFFSET, Control); \
-}
-
-/************************** Function Prototypes ******************************/
-
-void XEmac_SendFrame(u32 BaseAddress, u8 * FramePtr, int Size);
-int XEmac_RecvFrame(u32 BaseAddress, u8 * FramePtr);
-
-#endif /* end of protection macro */
diff --git a/board/xilinx/xilinx_enet/xemac_options.c b/board/xilinx/xilinx_enet/xemac_options.c
deleted file mode 100644
index 1f225f8..0000000
--- a/board/xilinx/xilinx_enet/xemac_options.c
+++ /dev/null
@@ -1,318 +0,0 @@
-/******************************************************************************
-*
-* Author: Xilinx, Inc.
-*
-*
-* This program is free software; you can redistribute it and/or modify it
-* under the terms of the GNU General Public License as published by the
-* Free Software Foundation; either version 2 of the License, or (at your
-* option) any later version.
-*
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-* FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-* Xilinx hardware products are not intended for use in life support
-* appliances, devices, or systems. Use in such applications is
-* expressly prohibited.
-*
-*
-* (c) Copyright 2002-2004 Xilinx Inc.
-* All rights reserved.
-*
-*
-* You should have received a copy of the GNU General Public License along
-* with this program; if not, write to the Free Software Foundation, Inc.,
-* 675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/**
-*
-* @file xemac_options.c
-*
-* Functions in this file handle configuration of the XEmac driver.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver Who Date Changes
-* ----- ---- -------- -----------------------------------------------
-* 1.00a rpm 07/31/01 First release
-* 1.00b rpm 02/20/02 Repartitioned files and functions
-* 1.00c rpm 12/05/02 New version includes support for simple DMA
-* </pre>
-*
-******************************************************************************/
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-#include "xemac_i.h"
-#include "xio.h"
-
-/************************** Constant Definitions *****************************/
-
-#define XEM_MAX_IFG 32 /* Maximum Interframe gap value */
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Function Prototypes ******************************/
-
-/************************** Variable Definitions *****************************/
-
-/*
- * A table of options and masks. This table maps the user-visible options with
- * the control register masks. It is used in Set/GetOptions as an alternative
- * to a series of if/else pairs. Note that the polled options does not have a
- * corresponding entry in the control register, so it does not exist in the
- * table.
- */
-typedef struct {
- u32 Option;
- u32 Mask;
-} OptionMap;
-
-static OptionMap OptionsTable[] = {
- {XEM_UNICAST_OPTION, XEM_ECR_UNICAST_ENABLE_MASK},
- {XEM_BROADCAST_OPTION, XEM_ECR_BROAD_ENABLE_MASK},
- {XEM_PROMISC_OPTION, XEM_ECR_PROMISC_ENABLE_MASK},
- {XEM_FDUPLEX_OPTION, XEM_ECR_FULL_DUPLEX_MASK},
- {XEM_LOOPBACK_OPTION, XEM_ECR_LOOPBACK_MASK},
- {XEM_MULTICAST_OPTION, XEM_ECR_MULTI_ENABLE_MASK},
- {XEM_FLOW_CONTROL_OPTION, XEM_ECR_PAUSE_FRAME_MASK},
- {XEM_INSERT_PAD_OPTION, XEM_ECR_XMIT_PAD_ENABLE_MASK},
- {XEM_INSERT_FCS_OPTION, XEM_ECR_XMIT_FCS_ENABLE_MASK},
- {XEM_INSERT_ADDR_OPTION, XEM_ECR_XMIT_ADDR_INSERT_MASK},
- {XEM_OVWRT_ADDR_OPTION, XEM_ECR_XMIT_ADDR_OVWRT_MASK},
- {XEM_STRIP_PAD_FCS_OPTION, XEM_ECR_RECV_STRIP_ENABLE_MASK}
-};
-
-#define XEM_NUM_OPTIONS (sizeof(OptionsTable) / sizeof(OptionMap))
-
-/*****************************************************************************/
-/**
-*
-* Set Ethernet driver/device options. The device must be stopped before
-* calling this function. The options are contained within a bit-mask with each
-* bit representing an option (i.e., you can OR the options together). A one (1)
-* in the bit-mask turns an option on, and a zero (0) turns the option off.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param OptionsFlag is a bit-mask representing the Ethernet options to turn on
-* or off. See xemac.h for a description of the available options.
-*
-* @return
-*
-* - XST_SUCCESS if the options were set successfully
-* - XST_DEVICE_IS_STARTED if the device has not yet been stopped
-*
-* @note
-*
-* This function is not thread-safe and makes use of internal resources that are
-* shared between the Start, Stop, and SetOptions functions, so if one task
-* might be setting device options while another is trying to start the device,
-* protection of this shared data (typically using a semaphore) is required.
-*
-******************************************************************************/
-XStatus
-XEmac_SetOptions(XEmac * InstancePtr, u32 OptionsFlag)
-{
- u32 ControlReg;
- int Index;
-
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) {
- return XST_DEVICE_IS_STARTED;
- }
-
- ControlReg = XIo_In32(InstancePtr->BaseAddress + XEM_ECR_OFFSET);
-
- /*
- * Loop through the options table, turning the option on or off
- * depending on whether the bit is set in the incoming options flag.
- */
- for (Index = 0; Index < XEM_NUM_OPTIONS; Index++) {
- if (OptionsFlag & OptionsTable[Index].Option) {
- ControlReg |= OptionsTable[Index].Mask; /* turn it on */
- } else {
- ControlReg &= ~OptionsTable[Index].Mask; /* turn it off */
- }
- }
-
- /*
- * TODO: need to validate addr-overwrite only if addr-insert?
- */
-
- /*
- * Now write the control register. Leave it to the upper layers
- * to restart the device.
- */
- XIo_Out32(InstancePtr->BaseAddress + XEM_ECR_OFFSET, ControlReg);
-
- /*
- * Check the polled option
- */
- if (OptionsFlag & XEM_POLLED_OPTION) {
- InstancePtr->IsPolled = TRUE;
- } else {
- InstancePtr->IsPolled = FALSE;
- }
-
- return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/**
-*
-* Get Ethernet driver/device options. The 32-bit value returned is a bit-mask
-* representing the options. A one (1) in the bit-mask means the option is on,
-* and a zero (0) means the option is off.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-*
-* @return
-*
-* The 32-bit value of the Ethernet options. The value is a bit-mask
-* representing all options that are currently enabled. See xemac.h for a
-* description of the available options.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-u32
-XEmac_GetOptions(XEmac * InstancePtr)
-{
- u32 OptionsFlag = 0;
- u32 ControlReg;
- int Index;
-
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /*
- * Get the control register to determine which options are currently set.
- */
- ControlReg = XIo_In32(InstancePtr->BaseAddress + XEM_ECR_OFFSET);
-
- /*
- * Loop through the options table to determine which options are set
- */
- for (Index = 0; Index < XEM_NUM_OPTIONS; Index++) {
- if (ControlReg & OptionsTable[Index].Mask) {
- OptionsFlag |= OptionsTable[Index].Option;
- }
- }
-
- if (InstancePtr->IsPolled) {
- OptionsFlag |= XEM_POLLED_OPTION;
- }
-
- return OptionsFlag;
-}
-
-/*****************************************************************************/
-/**
-*
-* Set the Interframe Gap (IFG), which is the time the MAC delays between
-* transmitting frames. There are two parts required. The total interframe gap
-* is the total of the two parts. The values provided for the Part1 and Part2
-* parameters are multiplied by 4 to obtain the bit-time interval. The first
-* part should be the first 2/3 of the total interframe gap. The MAC will reset
-* the interframe gap timer if carrier sense becomes true during the period
-* defined by interframe gap Part1. Part1 may be shorter than 2/3 the total and
-* can be as small as zero. The second part should be the last 1/3 of the total
-* interframe gap, but can be as large as the total interframe gap. The MAC
-* will not reset the interframe gap timer if carrier sense becomes true during
-* the period defined by interframe gap Part2.
-*
-* The device must be stopped before setting the interframe gap.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param Part1 is the interframe gap part 1 (which will be multiplied by 4 to
-* get the bit-time interval).
-* @param Part2 is the interframe gap part 2 (which will be multiplied by 4 to
-* get the bit-time interval).
-*
-* @return
-*
-* - XST_SUCCESS if the interframe gap was set successfully
-* - XST_DEVICE_IS_STARTED if the device has not been stopped
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XEmac_SetInterframeGap(XEmac * InstancePtr, u8 Part1, u8 Part2)
-{
- u32 Ifg;
-
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(Part1 < XEM_MAX_IFG);
- XASSERT_NONVOID(Part2 < XEM_MAX_IFG);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /*
- * Be sure device has been stopped
- */
- if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) {
- return XST_DEVICE_IS_STARTED;
- }
-
- Ifg = Part1 << XEM_IFGP_PART1_SHIFT;
- Ifg |= (Part2 << XEM_IFGP_PART2_SHIFT);
- XIo_Out32(InstancePtr->BaseAddress + XEM_IFGP_OFFSET, Ifg);
-
- return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/**
-*
-* Get the interframe gap, parts 1 and 2. See the description of interframe gap
-* above in XEmac_SetInterframeGap().
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param Part1Ptr is a pointer to an 8-bit buffer into which the interframe gap
-* part 1 value will be copied.
-* @param Part2Ptr is a pointer to an 8-bit buffer into which the interframe gap
-* part 2 value will be copied.
-*
-* @return
-*
-* None. The values of the interframe gap parts are copied into the
-* output parameters.
-*
-******************************************************************************/
-void
-XEmac_GetInterframeGap(XEmac * InstancePtr, u8 * Part1Ptr, u8 * Part2Ptr)
-{
- u32 Ifg;
-
- XASSERT_VOID(InstancePtr != NULL);
- XASSERT_VOID(Part1Ptr != NULL);
- XASSERT_VOID(Part2Ptr != NULL);
- XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- Ifg = XIo_In32(InstancePtr->BaseAddress + XEM_IFGP_OFFSET);
- *Part1Ptr = (Ifg & XEM_IFGP_PART1_MASK) >> XEM_IFGP_PART1_SHIFT;
- *Part2Ptr = (Ifg & XEM_IFGP_PART2_MASK) >> XEM_IFGP_PART2_SHIFT;
-}
diff --git a/board/xilinx/xilinx_enet/xemac_polled.c b/board/xilinx/xilinx_enet/xemac_polled.c
deleted file mode 100644
index 23768bc..0000000
--- a/board/xilinx/xilinx_enet/xemac_polled.c
+++ /dev/null
@@ -1,482 +0,0 @@
-/******************************************************************************
-*
-* Author: Xilinx, Inc.
-*
-*
-* This program is free software; you can redistribute it and/or modify it
-* under the terms of the GNU General Public License as published by the
-* Free Software Foundation; either version 2 of the License, or (at your
-* option) any later version.
-*
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-* FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-* Xilinx hardware products are not intended for use in life support
-* appliances, devices, or systems. Use in such applications is
-* expressly prohibited.
-*
-*
-* (c) Copyright 2002-2004 Xilinx Inc.
-* All rights reserved.
-*
-*
-* You should have received a copy of the GNU General Public License along
-* with this program; if not, write to the Free Software Foundation, Inc.,
-* 675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/**
-*
-* @file xemac_polled.c
-*
-* Contains functions used when the driver is in polled mode. Use the
-* XEmac_SetOptions() function to put the driver into polled mode.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver Who Date Changes
-* ----- ---- -------- -----------------------------------------------
-* 1.00a rpm 07/31/01 First release
-* 1.00b rpm 02/20/02 Repartitioned files and functions
-* 1.00c rpm 12/05/02 New version includes support for simple DMA
-* </pre>
-*
-******************************************************************************/
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-#include "xemac_i.h"
-#include "xio.h"
-#include "xipif_v1_23_b.h" /* Uses v1.23b of the IPIF */
-
-/************************** Constant Definitions *****************************/
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Variable Definitions *****************************/
-
-/************************** Function Prototypes ******************************/
-
-/*****************************************************************************/
-/**
-*
-* Send an Ethernet frame in polled mode. The device/driver must be in polled
-* mode before calling this function. The driver writes the frame directly to
-* the MAC's packet FIFO, then enters a loop checking the device status for
-* completion or error. Statistics are updated if an error occurs. The buffer
-* to be sent must be word-aligned.
-*
-* It is assumed that the upper layer software supplies a correctly formatted
-* Ethernet frame, including the destination and source addresses, the
-* type/length field, and the data field. It is also assumed that upper layer
-* software does not append FCS at the end of the frame.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param BufPtr is a pointer to a word-aligned buffer containing the Ethernet
-* frame to be sent.
-* @param ByteCount is the size of the Ethernet frame.
-*
-* @return
-*
-* - XST_SUCCESS if the frame was sent successfully
-* - XST_DEVICE_IS_STOPPED if the device has not yet been started
-* - XST_NOT_POLLED if the device is not in polled mode
-* - XST_FIFO_NO_ROOM if there is no room in the EMAC's length FIFO for this frame
-* - XST_FIFO_ERROR if the FIFO was overrun or underrun. This error is critical
-* and requires the caller to reset the device.
-* - XST_EMAC_COLLISION if the send failed due to excess deferral or late
-* collision
-*
-* @note
-*
-* There is the possibility that this function will not return if the hardware
-* is broken (i.e., it never sets the status bit indicating that transmission is
-* done). If this is of concern to the user, the user should provide protection
-* from this problem - perhaps by using a different timer thread to monitor the
-* PollSend thread. On a 10Mbps MAC, it takes about 1.21 msecs to transmit a
-* maximum size Ethernet frame (1518 bytes). On a 100Mbps MAC, it takes about
-* 121 usecs to transmit a maximum size Ethernet frame.
-*
-* @internal
-*
-* The EMAC uses FIFOs behind its length and status registers. For this reason,
-* it is important to keep the length, status, and data FIFOs in sync when
-* reading or writing to them.
-*
-******************************************************************************/
-XStatus
-XEmac_PollSend(XEmac * InstancePtr, u8 * BufPtr, u32 ByteCount)
-{
- u32 IntrStatus;
- u32 XmitStatus;
- XStatus Result;
-
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(BufPtr != NULL);
- XASSERT_NONVOID(ByteCount > XEM_HDR_SIZE); /* send at least 1 byte */
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /*
- * Be sure the device is configured for polled mode and it is started
- */
- if (!InstancePtr->IsPolled) {
- return XST_NOT_POLLED;
- }
-
- if (InstancePtr->IsStarted != XCOMPONENT_IS_STARTED) {
- return XST_DEVICE_IS_STOPPED;
- }
-
- /*
- * Check for overruns and underruns for the transmit status and length
- * FIFOs and make sure the send packet FIFO is not deadlocked. Any of these
- * conditions is bad enough that we do not want to continue. The upper layer
- * software should reset the device to resolve the error.
- */
- IntrStatus = XIIF_V123B_READ_IISR(InstancePtr->BaseAddress);
-
- /*
- * Overrun errors
- */
- if (IntrStatus & (XEM_EIR_XMIT_SFIFO_OVER_MASK |
- XEM_EIR_XMIT_LFIFO_OVER_MASK)) {
- InstancePtr->Stats.XmitOverrunErrors++;
- InstancePtr->Stats.FifoErrors++;
- return XST_FIFO_ERROR;
- }
-
- /*
- * Underrun errors
- */
- if (IntrStatus & (XEM_EIR_XMIT_SFIFO_UNDER_MASK |
- XEM_EIR_XMIT_LFIFO_UNDER_MASK)) {
- InstancePtr->Stats.XmitUnderrunErrors++;
- InstancePtr->Stats.FifoErrors++;
- return XST_FIFO_ERROR;
- }
-
- if (XPF_V100B_IS_DEADLOCKED(&InstancePtr->SendFifo)) {
- InstancePtr->Stats.FifoErrors++;
- return XST_FIFO_ERROR;
- }
-
- /*
- * Before writing to the data FIFO, make sure the length FIFO is not
- * full. The data FIFO might not be full yet even though the length FIFO
- * is. This avoids an overrun condition on the length FIFO and keeps the
- * FIFOs in sync.
- */
- if (IntrStatus & XEM_EIR_XMIT_LFIFO_FULL_MASK) {
- /*
- * Clear the latched LFIFO_FULL bit so next time around the most
- * current status is represented
- */
- XIIF_V123B_WRITE_IISR(InstancePtr->BaseAddress,
- XEM_EIR_XMIT_LFIFO_FULL_MASK);
- return XST_FIFO_NO_ROOM;
- }
-
- /*
- * This is a non-blocking write. The packet FIFO returns an error if there
- * is not enough room in the FIFO for this frame.
- */
- Result =
- XPacketFifoV100b_Write(&InstancePtr->SendFifo, BufPtr, ByteCount);
- if (Result != XST_SUCCESS) {
- return Result;
- }
-
- /*
- * Loop on the MAC's status to wait for any pause to complete.
- */
- IntrStatus = XIIF_V123B_READ_IISR(InstancePtr->BaseAddress);
-
- while ((IntrStatus & XEM_EIR_XMIT_PAUSE_MASK) != 0) {
- IntrStatus = XIIF_V123B_READ_IISR(InstancePtr->BaseAddress);
- /*
- * Clear the pause status from the transmit status register
- */
- XIIF_V123B_WRITE_IISR(InstancePtr->BaseAddress,
- IntrStatus & XEM_EIR_XMIT_PAUSE_MASK);
- }
-
- /*
- * Set the MAC's transmit packet length register to tell it to transmit
- */
- XIo_Out32(InstancePtr->BaseAddress + XEM_TPLR_OFFSET, ByteCount);
-
- /*
- * Loop on the MAC's status to wait for the transmit to complete. The
- * transmit status is in the FIFO when the XMIT_DONE bit is set.
- */
- do {
- IntrStatus = XIIF_V123B_READ_IISR(InstancePtr->BaseAddress);
- }
- while ((IntrStatus & XEM_EIR_XMIT_DONE_MASK) == 0);
-
- XmitStatus = XIo_In32(InstancePtr->BaseAddress + XEM_TSR_OFFSET);
-
- InstancePtr->Stats.XmitFrames++;
- InstancePtr->Stats.XmitBytes += ByteCount;
-
- /*
- * Check for various errors, bump statistics, and return an error status.
- */
-
- /*
- * Overrun errors
- */
- if (IntrStatus & (XEM_EIR_XMIT_SFIFO_OVER_MASK |
- XEM_EIR_XMIT_LFIFO_OVER_MASK)) {
- InstancePtr->Stats.XmitOverrunErrors++;
- InstancePtr->Stats.FifoErrors++;
- return XST_FIFO_ERROR;
- }
-
- /*
- * Underrun errors
- */
- if (IntrStatus & (XEM_EIR_XMIT_SFIFO_UNDER_MASK |
- XEM_EIR_XMIT_LFIFO_UNDER_MASK)) {
- InstancePtr->Stats.XmitUnderrunErrors++;
- InstancePtr->Stats.FifoErrors++;
- return XST_FIFO_ERROR;
- }
-
- /*
- * Clear the interrupt status register of transmit statuses
- */
- XIIF_V123B_WRITE_IISR(InstancePtr->BaseAddress,
- IntrStatus & XEM_EIR_XMIT_ALL_MASK);
-
- /*
- * Collision errors are stored in the transmit status register
- * instead of the interrupt status register
- */
- if (XmitStatus & XEM_TSR_EXCESS_DEFERRAL_MASK) {
- InstancePtr->Stats.XmitExcessDeferral++;
- return XST_EMAC_COLLISION_ERROR;
- }
-
- if (XmitStatus & XEM_TSR_LATE_COLLISION_MASK) {
- InstancePtr->Stats.XmitLateCollisionErrors++;
- return XST_EMAC_COLLISION_ERROR;
- }
-
- return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/**
-*
-* Receive an Ethernet frame in polled mode. The device/driver must be in polled
-* mode before calling this function. The driver receives the frame directly
-* from the MAC's packet FIFO. This is a non-blocking receive, in that if there
-* is no frame ready to be received at the device, the function returns with an
-* error. The MAC's error status is not checked, so statistics are not updated
-* for polled receive. The buffer into which the frame will be received must be
-* word-aligned.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param BufPtr is a pointer to a word-aligned buffer into which the received
-* Ethernet frame will be copied.
-* @param ByteCountPtr is both an input and an output parameter. It is a pointer
-* to a 32-bit word that contains the size of the buffer on entry into the
-* function and the size the received frame on return from the function.
-*
-* @return
-*
-* - XST_SUCCESS if the frame was sent successfully
-* - XST_DEVICE_IS_STOPPED if the device has not yet been started
-* - XST_NOT_POLLED if the device is not in polled mode
-* - XST_NO_DATA if there is no frame to be received from the FIFO
-* - XST_BUFFER_TOO_SMALL if the buffer to receive the frame is too small for
-* the frame waiting in the FIFO.
-*
-* @note
-*
-* Input buffer must be big enough to hold the largest Ethernet frame. Buffer
-* must also be 32-bit aligned.
-*
-* @internal
-*
-* The EMAC uses FIFOs behind its length and status registers. For this reason,
-* it is important to keep the length, status, and data FIFOs in sync when
-* reading or writing to them.
-*
-******************************************************************************/
-XStatus
-XEmac_PollRecv(XEmac * InstancePtr, u8 * BufPtr, u32 * ByteCountPtr)
-{
- XStatus Result;
- u32 PktLength;
- u32 IntrStatus;
-
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(BufPtr != NULL);
- XASSERT_NONVOID(ByteCountPtr != NULL);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /*
- * Be sure the device is configured for polled mode and it is started
- */
- if (!InstancePtr->IsPolled) {
- return XST_NOT_POLLED;
- }
-
- if (InstancePtr->IsStarted != XCOMPONENT_IS_STARTED) {
- return XST_DEVICE_IS_STOPPED;
- }
-
- /*
- * Make sure the buffer is big enough to hold the maximum frame size.
- * We need to do this because as soon as we read the MAC's packet length
- * register, which is actually a FIFO, we remove that length from the
- * FIFO. We do not want to read the length FIFO without also reading the
- * data FIFO since this would get the FIFOs out of sync. So we have to
- * make this restriction.
- */
- if (*ByteCountPtr < XEM_MAX_FRAME_SIZE) {
- return XST_BUFFER_TOO_SMALL;
- }
-
- /*
- * First check for packet FIFO deadlock and return an error if it has
- * occurred. A reset by the caller is necessary to correct this problem.
- */
- if (XPF_V100B_IS_DEADLOCKED(&InstancePtr->RecvFifo)) {
- InstancePtr->Stats.FifoErrors++;
- return XST_FIFO_ERROR;
- }
-
- /*
- * Get the interrupt status to know what happened (whether an error occurred
- * and/or whether frames have been received successfully). When clearing the
- * intr status register, clear only statuses that pertain to receive.
- */
- IntrStatus = XIIF_V123B_READ_IISR(InstancePtr->BaseAddress);
- XIIF_V123B_WRITE_IISR(InstancePtr->BaseAddress,
- IntrStatus & XEM_EIR_RECV_ALL_MASK);
-
- /*
- * Check receive errors and bump statistics so the caller will have a clue
- * as to why data may not have been received. We continue on if an error
- * occurred since there still may be frames that were received successfully.
- */
- if (IntrStatus & (XEM_EIR_RECV_LFIFO_OVER_MASK |
- XEM_EIR_RECV_DFIFO_OVER_MASK)) {
- InstancePtr->Stats.RecvOverrunErrors++;
- InstancePtr->Stats.FifoErrors++;
- }
-
- if (IntrStatus & XEM_EIR_RECV_LFIFO_UNDER_MASK) {
- InstancePtr->Stats.RecvUnderrunErrors++;
- InstancePtr->Stats.FifoErrors++;
- }
-
- /*
- * General receive errors
- */
- if (IntrStatus & XEM_EIR_RECV_ERROR_MASK) {
- if (IntrStatus & XEM_EIR_RECV_MISSED_FRAME_MASK) {
- InstancePtr->Stats.RecvMissedFrameErrors =
- XIo_In32(InstancePtr->BaseAddress +
- XEM_RMFC_OFFSET);
- }
-
- if (IntrStatus & XEM_EIR_RECV_COLLISION_MASK) {
- InstancePtr->Stats.RecvCollisionErrors =
- XIo_In32(InstancePtr->BaseAddress + XEM_RCC_OFFSET);
- }
-
- if (IntrStatus & XEM_EIR_RECV_FCS_ERROR_MASK) {
- InstancePtr->Stats.RecvFcsErrors =
- XIo_In32(InstancePtr->BaseAddress +
- XEM_RFCSEC_OFFSET);
- }
-
- if (IntrStatus & XEM_EIR_RECV_LEN_ERROR_MASK) {
- InstancePtr->Stats.RecvLengthFieldErrors++;
- }
-
- if (IntrStatus & XEM_EIR_RECV_SHORT_ERROR_MASK) {
- InstancePtr->Stats.RecvShortErrors++;
- }
-
- if (IntrStatus & XEM_EIR_RECV_LONG_ERROR_MASK) {
- InstancePtr->Stats.RecvLongErrors++;
- }
-
- if (IntrStatus & XEM_EIR_RECV_ALIGN_ERROR_MASK) {
- InstancePtr->Stats.RecvAlignmentErrors =
- XIo_In32(InstancePtr->BaseAddress +
- XEM_RAEC_OFFSET);
- }
- }
-
- /*
- * Before reading from the length FIFO, make sure the length FIFO is not
- * empty. We could cause an underrun error if we try to read from an
- * empty FIFO.
- */
- if ((IntrStatus & XEM_EIR_RECV_DONE_MASK) == 0) {
- return XST_NO_DATA;
- }
-
- /*
- * Determine, from the MAC, the length of the next packet available
- * in the data FIFO (there should be a non-zero length here)
- */
- PktLength = XIo_In32(InstancePtr->BaseAddress + XEM_RPLR_OFFSET);
- if (PktLength == 0) {
- return XST_NO_DATA;
- }
-
- /*
- * Write the RECV_DONE bit in the status register to clear it. This bit
- * indicates the RPLR is non-empty, and we know it's set at this point.
- * We clear it so that subsequent entry into this routine will reflect the
- * current status. This is done because the non-empty bit is latched in the
- * IPIF, which means it may indicate a non-empty condition even though
- * there is something in the FIFO.
- */
- XIIF_V123B_WRITE_IISR(InstancePtr->BaseAddress, XEM_EIR_RECV_DONE_MASK);
-
- /*
- * We assume that the MAC never has a length bigger than the largest
- * Ethernet frame, so no need to make another check here.
- */
-
- /*
- * This is a non-blocking read. The FIFO returns an error if there is
- * not at least the requested amount of data in the FIFO.
- */
- Result =
- XPacketFifoV100b_Read(&InstancePtr->RecvFifo, BufPtr, PktLength);
- if (Result != XST_SUCCESS) {
- return Result;
- }
-
- InstancePtr->Stats.RecvFrames++;
- InstancePtr->Stats.RecvBytes += PktLength;
-
- *ByteCountPtr = PktLength;
-
- return XST_SUCCESS;
-}