x86: Use TEXT_BASE in linker scripts
Use TEXT_BASE rather than a hard-coded base address on x86 linker scripts.
This will allow any board to define its base link address without having
to modify the linker script
diff --git a/board/eNET/u-boot.lds b/board/eNET/u-boot.lds
index 7b0ffaa..d78d75f 100644
--- a/board/eNET/u-boot.lds
+++ b/board/eNET/u-boot.lds
@@ -27,7 +27,7 @@
SECTIONS
{
- . = 0x06000000; /* Location of bootcode in flash */
+ . = TEXT_BASE; /* Location of bootcode in flash */
_i386boot_text_start = .;
.text : { *(.text); }
@@ -98,12 +98,12 @@
* The fff0 offset of resetvec is important, however.
*/
. = 0xfffffe00;
- .start32 : AT (0x0603fe00) { *(.start32); }
+ .start32 : AT (TEXT_BASE + 0x3fe00) { *(.start32); }
. = 0xf800;
- .start16 : AT (0x0603f800) { *(.start16); }
+ .start16 : AT (TEXT_BASE + 0x3f800) { *(.start16); }
. = 0xfff0;
- .resetvec : AT (0x0603fff0) { *(.resetvec); }
+ .resetvec : AT (TEXT_BASE + 0x3fff0) { *(.resetvec); }
_i386boot_end = (LOADADDR(.resetvec) + SIZEOF(.resetvec) );
}