Merge 'u-boot-imx/master' into 'u-boot-arm/master'
diff --git a/.gitignore b/.gitignore
index a39bd54..3b14c25 100644
--- a/.gitignore
+++ b/.gitignore
@@ -47,8 +47,6 @@
/u-boot.ais
/u-boot.dtb
/u-boot.sb
-/u-boot.bd
-/u-boot.geany
#
# Generated files
@@ -59,6 +57,10 @@
/errlog
/reloc_off
+/spl/
+!/spl/Makefile
+/tpl/
+
/include/generated/
/include/spl-autoconf.mk
/include/tpl-autoconf.mk
@@ -88,6 +90,3 @@
GRTAGS
GSYMS
GTAGS
-
-# spl ais files
-/spl/*.ais
diff --git a/MAKEALL b/MAKEALL
index a74f0fc..562071a 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -381,6 +381,12 @@
LIST_ARMV7="$(targets_by_cpu armv7)"
#########################################################################
+## ARMV8 Systems
+#########################################################################
+
+LIST_ARMV8="$(targets_by_cpu armv8)"
+
+#########################################################################
## AT91 Systems
#########################################################################
@@ -404,7 +410,11 @@
## ARM groups
#########################################################################
-LIST_arm="$(targets_by_arch arm)"
+LIST_arm="$(targets_by_arch arm | \
+ for ARMV8_TARGET in $LIST_ARMV8; \
+ do sed "/$ARMV8_TARGET/d"; \
+ done) \
+"
#########################################################################
## MIPS Systems (default = big endian)
diff --git a/Makefile b/Makefile
index 0d86b55..e6f6edb 100644
--- a/Makefile
+++ b/Makefile
@@ -8,7 +8,7 @@
VERSION = 2014
PATCHLEVEL = 01
SUBLEVEL =
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
ifneq "$(SUBLEVEL)" ""
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
else
@@ -109,11 +109,6 @@
MKCONFIG := $(SRCTREE)/mkconfig
export MKCONFIG
-ifneq ($(OBJTREE),$(SRCTREE))
-REMOTE_BUILD := 1
-export REMOTE_BUILD
-endif
-
# $(obj) and (src) are defined in config.mk but here in main Makefile
# we also need them before config.mk is included which is the case for
# some targets like unconfig, clean, clobber, distclean, etc.
@@ -168,7 +163,7 @@
include $(TOPDIR)/config.mk
# Targets which don't build the source code
-NON_BUILD_TARGETS = backup clean clobber distclean mkproper tidy unconfig
+NON_BUILD_TARGETS = backup clean clobber distclean mrproper tidy unconfig
# Only do the generic board check when actually building, not configuring
ifeq ($(filter $(NON_BUILD_TARGETS),$(MAKECMDGOALS)),)
@@ -187,7 +182,7 @@
#LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds.debug
ifdef CONFIG_SYS_LDSCRIPT
# need to strip off double quotes
- LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT))
+ LDSCRIPT := $(CONFIG_SYS_LDSCRIPT:"%"=%)
endif
endif
@@ -218,15 +213,11 @@
#########################################################################
# U-Boot objects....order is important (i.e. start must be first)
-OBJS = $(CPUDIR)/start.o
-ifeq ($(CPU),ppc4xx)
-OBJS += $(CPUDIR)/resetvec.o
-endif
-ifeq ($(CPU),mpc85xx)
-OBJS += $(CPUDIR)/resetvec.o
-endif
+head-y := $(CPUDIR)/start.o
+head-$(CONFIG_4xx) += arch/powerpc/cpu/ppc4xx/resetvec.o
+head-$(CONFIG_MPC85xx) += arch/powerpc/cpu/mpc85xx/resetvec.o
-OBJS := $(addprefix $(obj),$(OBJS))
+OBJS := $(addprefix $(obj),$(head-y))
HAVE_VENDOR_COMMON_LIB = $(if $(wildcard board/$(VENDOR)/common/Makefile),y,n)
@@ -249,9 +240,9 @@
LIBS-y += drivers/input/
LIBS-y += drivers/mmc/
LIBS-y += drivers/mtd/
-LIBS-y += drivers/mtd/nand/
+LIBS-$(CONFIG_CMD_NAND) += drivers/mtd/nand/
LIBS-y += drivers/mtd/onenand/
-LIBS-y += drivers/mtd/ubi/
+LIBS-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/
LIBS-y += drivers/mtd/spi/
LIBS-y += drivers/net/
LIBS-y += drivers/net/phy/
@@ -275,7 +266,7 @@
LIBS-y += common/
LIBS-y += lib/libfdt/
LIBS-$(CONFIG_API) += api/
-LIBS-y += post/
+LIBS-$(CONFIG_HAS_POST) += post/
LIBS-y += test/
ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610))
@@ -334,6 +325,17 @@
BOARD_SIZE_CHECK =
endif
+# Statically apply RELA-style relocations (currently arm64 only)
+ifneq ($(CONFIG_STATIC_RELA),)
+# $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base
+DO_STATIC_RELA = \
+ start=$$($(NM) $(1) | grep __rel_dyn_start | cut -f 1 -d ' '); \
+ end=$$($(NM) $(1) | grep __rel_dyn_end | cut -f 1 -d ' '); \
+ $(obj)tools/relocate-rela $(2) $(3) $$start $$end
+else
+DO_STATIC_RELA =
+endif
+
# Always append ALL so that arch config.mk's can add custom ones
ALL-y += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map
@@ -345,8 +347,9 @@
ALL-$(CONFIG_TPL) += $(obj)tpl/u-boot-tpl.bin
ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin
ifneq ($(CONFIG_SPL_TARGET),)
-ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET))
+ALL-$(CONFIG_SPL) += $(obj)$(CONFIG_SPL_TARGET:"%"=%)
endif
+ALL-$(CONFIG_REMAKE_ELF) += $(obj)u-boot.elf
# enable combined SPL/u-boot/dtb rules for tegra
ifneq ($(CONFIG_TEGRA),)
@@ -378,6 +381,7 @@
$(obj)u-boot.bin: $(obj)u-boot
$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+ $(call DO_STATIC_RELA,$<,$@,$(CONFIG_SYS_TEXT_BASE))
$(BOARD_SIZE_CHECK)
$(obj)u-boot.ldr: $(obj)u-boot
@@ -482,12 +486,10 @@
$(obj)u-boot.spr: $(obj)u-boot.img $(obj)spl/u-boot-spl.bin
$(obj)tools/mkimage -A $(ARCH) -T firmware -C none \
-a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER \
- -d $(obj)spl/u-boot-spl.bin $(obj)spl/u-boot-spl.img
- tr "\000" "\377" < /dev/zero | dd ibs=1 count=$(CONFIG_SPL_PAD_TO) \
- of=$(obj)spl/u-boot-spl-pad.img 2>/dev/null
- dd if=$(obj)spl/u-boot-spl.img of=$(obj)spl/u-boot-spl-pad.img \
- conv=notrunc 2>/dev/null
- cat $(obj)spl/u-boot-spl-pad.img $(obj)u-boot.img > $@
+ -d $(obj)spl/u-boot-spl.bin $@
+ $(OBJCOPY) -I binary -O binary \
+ --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff $@
+ cat $(obj)u-boot.img >> $@
ifneq ($(CONFIG_TEGRA),)
$(obj)u-boot-nodtb-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
@@ -510,11 +512,21 @@
# at the start padded up to the start of the SPL image. And then concat
# the SPL image to the end.
$(obj)u-boot-img-spl-at-end.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
- tr "\000" "\377" < /dev/zero | dd ibs=1 count=$(CONFIG_UBOOT_PAD_TO) \
- of=$(obj)u-boot-pad.img 2>/dev/null
- dd if=$(obj)u-boot.img of=$(obj)u-boot-pad.img \
- conv=notrunc 2>/dev/null
- cat $(obj)u-boot-pad.img $(obj)spl/u-boot-spl.bin > $@
+ $(OBJCOPY) -I binary -O binary --pad-to=$(CONFIG_UBOOT_PAD_TO) \
+ --gap-fill=0xff $(obj)u-boot.img $@
+ cat $(obj)spl/u-boot-spl.bin >> $@
+
+# Create a new ELF from a raw binary file. This is useful for arm64
+# where static relocation needs to be performed on the raw binary,
+# but certain simulators only accept an ELF file (but don't do the
+# relocation).
+# FIXME refactor dts/Makefile to share target/arch detection
+$(obj)u-boot.elf: $(obj)u-boot.bin
+ @$(OBJCOPY) -B aarch64 -I binary -O elf64-littleaarch64 \
+ $< $(obj)u-boot-elf.o
+ @$(LD) $(obj)u-boot-elf.o -o $@ \
+ --defsym=_start=$(CONFIG_SYS_TEXT_BASE) \
+ -Ttext=$(CONFIG_SYS_TEXT_BASE)
ifeq ($(CONFIG_SANDBOX),y)
GEN_UBOOT = \
@@ -530,7 +542,7 @@
endif
$(obj)u-boot: depend \
- $(SUBDIR_TOOLS) $(OBJS) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds
+ $(SUBDIR_TOOLS) $(OBJS) $(LIBS) $(obj)u-boot.lds
$(GEN_UBOOT)
ifeq ($(CONFIG_KALLSYMS),y)
smap=`$(call SYSTEM_MAP,$(obj)u-boot) | \
@@ -551,10 +563,7 @@
$(SUBDIR_EXAMPLES-y): $(obj)u-boot
-$(LDSCRIPT): depend
- $(MAKE) -C $(dir $@) $(notdir $@)
-
-$(obj)u-boot.lds: $(LDSCRIPT)
+$(obj)u-boot.lds: $(LDSCRIPT) depend
$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$< >$@
nand_spl: $(TIMESTAMP_FILE) $(VERSION_FILE) depend
@@ -588,7 +597,7 @@
checkstack:
$(CROSS_COMPILE)objdump -d $(obj)u-boot \
`$(FIND) $(obj) -name u-boot-spl -print` | \
- perl $(src)tools/checkstack.pl $(ARCH)
+ perl $(src)scripts/checkstack.pl $(ARCH)
tags ctags:
ctags -w -o $(obj)ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
@@ -640,63 +649,49 @@
# to regenerate the autoconf.mk file.
$(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h
@$(XECHO) Generating $@ ; \
- set -e ; \
: Generate the dependancies ; \
$(CC) -x c -DDO_DEPS_ONLY -M $(CFLAGS) $(CPPFLAGS) \
- -MQ $(obj)include/autoconf.mk include/common.h > $@
+ -MQ $(obj)include/autoconf.mk include/common.h > $@ || \
+ rm $@
$(obj)include/autoconf.mk: $(obj)include/config.h
@$(XECHO) Generating $@ ; \
- set -e ; \
: Extract the config macros ; \
- $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
- sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
- mv $@.tmp $@
+ $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h > $@.tmp && \
+ sed -n -f tools/scripts/define2mk.sed $@.tmp > $@; \
+ rm $@.tmp
# Auto-generate the spl-autoconf.mk file (which is included by all makefiles for SPL)
$(obj)include/tpl-autoconf.mk: $(obj)include/config.h
@$(XECHO) Generating $@ ; \
- set -e ; \
: Extract the config macros ; \
$(CPP) $(CFLAGS) -DCONFIG_TPL_BUILD -DCONFIG_SPL_BUILD\
- -DDO_DEPS_ONLY -dM include/common.h | \
- sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
- mv $@.tmp $@
+ -DDO_DEPS_ONLY -dM include/common.h > $@.tmp && \
+ sed -n -f tools/scripts/define2mk.sed $@.tmp > $@; \
+ rm $@.tmp
$(obj)include/spl-autoconf.mk: $(obj)include/config.h
@$(XECHO) Generating $@ ; \
- set -e ; \
: Extract the config macros ; \
- $(CPP) $(CFLAGS) -DCONFIG_SPL_BUILD -DDO_DEPS_ONLY -dM include/common.h | \
- sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
- mv $@.tmp $@
+ $(CPP) $(CFLAGS) -DCONFIG_SPL_BUILD -DDO_DEPS_ONLY -dM include/common.h > $@.tmp && \
+ sed -n -f tools/scripts/define2mk.sed $@.tmp > $@; \
+ rm $@.tmp
-$(obj)include/generated/generic-asm-offsets.h: $(obj)include/autoconf.mk.dep \
- $(obj)include/spl-autoconf.mk \
- $(obj)include/tpl-autoconf.mk \
- $(obj)lib/asm-offsets.s
+$(obj)include/generated/generic-asm-offsets.h: $(obj)lib/asm-offsets.s
@$(XECHO) Generating $@
tools/scripts/make-asm-offsets $(obj)lib/asm-offsets.s $@
-$(obj)lib/asm-offsets.s: $(obj)include/autoconf.mk.dep \
- $(obj)include/spl-autoconf.mk \
- $(obj)include/tpl-autoconf.mk \
- $(src)lib/asm-offsets.c
+$(obj)lib/asm-offsets.s: $(obj)include/config.h $(src)lib/asm-offsets.c
@mkdir -p $(obj)lib
$(CC) -DDO_DEPS_ONLY \
$(CFLAGS) $(CFLAGS_$(BCURDIR)/$(@F)) $(CFLAGS_$(BCURDIR)) \
-o $@ $(src)lib/asm-offsets.c -c -S
-$(obj)include/generated/asm-offsets.h: $(obj)include/autoconf.mk.dep \
- $(obj)include/spl-autoconf.mk \
- $(obj)include/tpl-autoconf.mk \
- $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s
+$(obj)include/generated/asm-offsets.h: $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s
@$(XECHO) Generating $@
tools/scripts/make-asm-offsets $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s $@
-$(obj)$(CPUDIR)/$(SOC)/asm-offsets.s: $(obj)include/autoconf.mk.dep \
- $(obj)include/spl-autoconf.mk \
- $(obj)include/tpl-autoconf.mk
+$(obj)$(CPUDIR)/$(SOC)/asm-offsets.s: $(obj)include/config.h
@mkdir -p $(obj)$(CPUDIR)/$(SOC)
if [ -f $(src)$(CPUDIR)/$(SOC)/asm-offsets.c ];then \
$(CC) -DDO_DEPS_ONLY \
@@ -719,16 +714,20 @@
$(MAKE) -C $@ all
endif # config.mk
-# ARM relocations should all be R_ARM_RELATIVE.
+# ARM relocations should all be R_ARM_RELATIVE (32-bit) or
+# R_AARCH64_RELATIVE (64-bit).
checkarmreloc: $(obj)u-boot
- @if test "R_ARM_RELATIVE" != \
- "`$(CROSS_COMPILE)readelf -r $< | cut -d ' ' -f 4 | grep R_ARM | sort -u`"; \
- then echo "$< contains relocations other than \
- R_ARM_RELATIVE"; false; fi
+ @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
+ grep R_A | sort -u`"; \
+ if test "$$RELOC" != "R_ARM_RELATIVE" -a \
+ "$$RELOC" != "R_AARCH64_RELATIVE"; then \
+ echo "$< contains unexpected relocations: $$RELOC"; \
+ false; \
+ fi
$(VERSION_FILE):
@mkdir -p $(dir $(VERSION_FILE))
- @( localvers='$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ; \
+ @( localvers='$(shell $(TOPDIR)/scripts/setlocalversion $(TOPDIR))' ; \
printf '#define PLAIN_VERSION "%s%s"\n' \
"$(U_BOOT_VERSION)" "$${localvers}" ; \
printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' \
@@ -783,9 +782,7 @@
#########################################################################
clean:
- @rm -f $(obj)examples/standalone/82559_eeprom \
- $(obj)examples/standalone/atmel_df_pow2 \
- $(obj)examples/standalone/eepro100_eeprom \
+ @rm -f $(obj)examples/standalone/atmel_df_pow2 \
$(obj)examples/standalone/hello_world \
$(obj)examples/standalone/interrupt \
$(obj)examples/standalone/mem_to_mem_idma2intr \
@@ -795,10 +792,11 @@
$(obj)examples/standalone/timer
@rm -f $(obj)examples/api/demo{,.bin}
@rm -f $(obj)tools/bmp_logo $(obj)tools/easylogo/easylogo \
- $(obj)tools/env/{fw_printenv,fw_setenv} \
+ $(obj)tools/env/fw_printenv \
$(obj)tools/envcrc \
- $(obj)tools/gdb/{astest,gdbcont,gdbsend} \
+ $(obj)tools/gdb/{gdbcont,gdbsend} \
$(obj)tools/gen_eth_addr $(obj)tools/img2srec \
+ $(obj)tools/dump{env,}image \
$(obj)tools/mk{env,}image $(obj)tools/mpc86x_clk \
$(obj)tools/mk{$(BOARD),}spl \
$(obj)tools/mxsboot \
@@ -807,7 +805,6 @@
$(obj)tools/proftool
@rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \
$(obj)board/matrix_vision/*/bootscript.img \
- $(obj)board/voiceblue/eeprom \
$(obj)u-boot.lds \
$(obj)arch/blackfin/cpu/init.{lds,elf}
@rm -f $(obj)include/bmp_logo.h
@@ -843,7 +840,6 @@
@rm -f $(obj)u-boot.ais
@rm -f $(obj)u-boot.dtb
@rm -f $(obj)u-boot.sb
- @rm -f $(obj)u-boot.bd
@rm -f $(obj)u-boot.spr
@rm -f $(obj)nand_spl/{u-boot.{lds,lst},System.map}
@rm -f $(obj)nand_spl/{u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map}
diff --git a/README b/README
index 8f0b38c..a0646c3 100644
--- a/README
+++ b/README
@@ -423,6 +423,11 @@
CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
This value denotes start offset of DSP CCSR space.
+ CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
+ Single Source Clock is clocking mode present in some of FSL SoC's.
+ In this mode, a single differential clock is used to supply
+ clocks to the sysclock, ddrclock and usbclock.
+
- Generic CPU options:
CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN
@@ -3267,6 +3272,9 @@
Defines the size and behavior of the NAND that SPL uses
to read U-Boot
+ CONFIG_SPL_NAND_BOOT
+ Add support NAND boot
+
CONFIG_SYS_NAND_U_BOOT_OFFS
Location in NAND to read U-Boot from
@@ -5252,6 +5260,15 @@
Load Address: 0x00000000
Entry Point: 0x00000000
+The "dumpimage" is a tool to disassemble images built by mkimage. Its "-i"
+option performs the converse operation of the mkimage's second form (the "-d"
+option). Given an image built by mkimage, the dumpimage extracts a "data file"
+from the image:
+
+ tools/dumpimage -i image -p position data_file
+ -i ==> extract from the 'image' a specific 'data_file', \
+ indexed by 'position'
+
Installing a Linux Image:
-------------------------
diff --git a/arch/arm/config.mk b/arch/arm/config.mk
index fd3e5fb..cfa4209 100644
--- a/arch/arm/config.mk
+++ b/arch/arm/config.mk
@@ -17,7 +17,8 @@
LDFLAGS_FINAL += --gc-sections
PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections \
- -fno-common -ffixed-r9 -msoft-float
+ -fno-common -ffixed-r9
+PLATFORM_RELFLAGS += $(call cc-option, -msoft-float)
# Support generic board on ARM
__HAVE_ARCH_GENERIC_BOARD := y
@@ -105,4 +106,8 @@
endif
# limit ourselves to the sections we want in the .bin.
-OBJCFLAGS += -j .text -j .rodata -j .data -j .u_boot_list -j .rel.dyn
+ifdef CONFIG_ARM64
+OBJCFLAGS += -j .text -j .rodata -j .data -j .u_boot_list -j .rela.dyn
+else
+OBJCFLAGS += -j .text -j .rodata -j .hash -j .data -j .got.plt -j .u_boot_list -j .rel.dyn
+endif
diff --git a/arch/arm/cpu/armv7/exynos/config.mk b/arch/arm/cpu/armv7/exynos/config.mk
new file mode 100644
index 0000000..ee0d2da
--- /dev/null
+++ b/arch/arm/cpu/armv7/exynos/config.mk
@@ -0,0 +1,7 @@
+#
+# Copyright (C) Albert ARIBAUD <albert.u.boot@aribaud.net>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+SPL_OBJCFLAGS += -j .machine_param
diff --git a/arch/arm/cpu/armv7/zynq/slcr.c b/arch/arm/cpu/armv7/zynq/slcr.c
index 717ec65..b4c11c3 100644
--- a/arch/arm/cpu/armv7/zynq/slcr.c
+++ b/arch/arm/cpu/armv7/zynq/slcr.c
@@ -101,6 +101,12 @@
zynq_slcr_lock();
}
+u32 zynq_slcr_get_boot_mode(void)
+{
+ /* Get the bootmode register value */
+ return readl(&slcr_base->boot_mode);
+}
+
u32 zynq_slcr_get_idcode(void)
{
return (readl(&slcr_base->pss_idcode) & SLCR_IDCODE_MASK) >>
diff --git a/arch/arm/cpu/armv7/zynq/timer.c b/arch/arm/cpu/armv7/zynq/timer.c
index 636322a..2be253c 100644
--- a/arch/arm/cpu/armv7/zynq/timer.c
+++ b/arch/arm/cpu/armv7/zynq/timer.c
@@ -107,8 +107,7 @@
if (usec == 0)
return;
- countticks = (u32) (((unsigned long long) TIMER_TICK_HZ * usec) /
- 1000000);
+ countticks = lldiv(TIMER_TICK_HZ * usec, 1000000);
/* decrementing timer */
timeend = readl(&timer_base->counter) - countticks;
diff --git a/arch/arm/cpu/armv8/Makefile b/arch/arm/cpu/armv8/Makefile
new file mode 100644
index 0000000..b6eb6de
--- /dev/null
+++ b/arch/arm/cpu/armv8/Makefile
@@ -0,0 +1,17 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+extra-y := start.o
+
+obj-y += cpu.o
+obj-y += generic_timer.o
+obj-y += cache_v8.o
+obj-y += exceptions.o
+obj-y += cache.o
+obj-y += tlb.o
+obj-y += gic.o
+obj-y += transition.o
diff --git a/arch/arm/cpu/armv8/cache.S b/arch/arm/cpu/armv8/cache.S
new file mode 100644
index 0000000..546a83e
--- /dev/null
+++ b/arch/arm/cpu/armv8/cache.S
@@ -0,0 +1,136 @@
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * This file is based on sample code from ARMv8 ARM.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <version.h>
+#include <asm/macro.h>
+#include <linux/linkage.h>
+
+/*
+ * void __asm_flush_dcache_level(level)
+ *
+ * clean and invalidate one level cache.
+ *
+ * x0: cache level
+ * x1~x9: clobbered
+ */
+ENTRY(__asm_flush_dcache_level)
+ lsl x1, x0, #1
+ msr csselr_el1, x1 /* select cache level */
+ isb /* sync change of cssidr_el1 */
+ mrs x6, ccsidr_el1 /* read the new cssidr_el1 */
+ and x2, x6, #7 /* x2 <- log2(cache line size)-4 */
+ add x2, x2, #4 /* x2 <- log2(cache line size) */
+ mov x3, #0x3ff
+ and x3, x3, x6, lsr #3 /* x3 <- max number of #ways */
+ add w4, w3, w3
+ sub w4, w4, 1 /* round up log2(#ways + 1) */
+ clz w5, w4 /* bit position of #ways */
+ mov x4, #0x7fff
+ and x4, x4, x6, lsr #13 /* x4 <- max number of #sets */
+ /* x1 <- cache level << 1 */
+ /* x2 <- line length offset */
+ /* x3 <- number of cache ways - 1 */
+ /* x4 <- number of cache sets - 1 */
+ /* x5 <- bit position of #ways */
+
+loop_set:
+ mov x6, x3 /* x6 <- working copy of #ways */
+loop_way:
+ lsl x7, x6, x5
+ orr x9, x1, x7 /* map way and level to cisw value */
+ lsl x7, x4, x2
+ orr x9, x9, x7 /* map set number to cisw value */
+ dc cisw, x9 /* clean & invalidate by set/way */
+ subs x6, x6, #1 /* decrement the way */
+ b.ge loop_way
+ subs x4, x4, #1 /* decrement the set */
+ b.ge loop_set
+
+ ret
+ENDPROC(__asm_flush_dcache_level)
+
+/*
+ * void __asm_flush_dcache_all(void)
+ *
+ * clean and invalidate all data cache by SET/WAY.
+ */
+ENTRY(__asm_flush_dcache_all)
+ dsb sy
+ mrs x10, clidr_el1 /* read clidr_el1 */
+ lsr x11, x10, #24
+ and x11, x11, #0x7 /* x11 <- loc */
+ cbz x11, finished /* if loc is 0, exit */
+ mov x15, lr
+ mov x0, #0 /* start flush at cache level 0 */
+ /* x0 <- cache level */
+ /* x10 <- clidr_el1 */
+ /* x11 <- loc */
+ /* x15 <- return address */
+
+loop_level:
+ lsl x1, x0, #1
+ add x1, x1, x0 /* x0 <- tripled cache level */
+ lsr x1, x10, x1
+ and x1, x1, #7 /* x1 <- cache type */
+ cmp x1, #2
+ b.lt skip /* skip if no cache or icache */
+ bl __asm_flush_dcache_level
+skip:
+ add x0, x0, #1 /* increment cache level */
+ cmp x11, x0
+ b.gt loop_level
+
+ mov x0, #0
+ msr csselr_el1, x0 /* resotre csselr_el1 */
+ dsb sy
+ isb
+ mov lr, x15
+
+finished:
+ ret
+ENDPROC(__asm_flush_dcache_all)
+
+/*
+ * void __asm_flush_dcache_range(start, end)
+ *
+ * clean & invalidate data cache in the range
+ *
+ * x0: start address
+ * x1: end address
+ */
+ENTRY(__asm_flush_dcache_range)
+ mrs x3, ctr_el0
+ lsr x3, x3, #16
+ and x3, x3, #0xf
+ mov x2, #4
+ lsl x2, x2, x3 /* cache line size */
+
+ /* x2 <- minimal cache line size in cache system */
+ sub x3, x2, #1
+ bic x0, x0, x3
+1: dc civac, x0 /* clean & invalidate data or unified cache */
+ add x0, x0, x2
+ cmp x0, x1
+ b.lo 1b
+ dsb sy
+ ret
+ENDPROC(__asm_flush_dcache_range)
+
+/*
+ * void __asm_invalidate_icache_all(void)
+ *
+ * invalidate all tlb entries.
+ */
+ENTRY(__asm_invalidate_icache_all)
+ ic ialluis
+ isb sy
+ ret
+ENDPROC(__asm_invalidate_icache_all)
diff --git a/arch/arm/cpu/armv8/cache_v8.c b/arch/arm/cpu/armv8/cache_v8.c
new file mode 100644
index 0000000..131fdab
--- /dev/null
+++ b/arch/arm/cpu/armv8/cache_v8.c
@@ -0,0 +1,219 @@
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/system.h>
+#include <asm/armv8/mmu.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+
+static void set_pgtable_section(u64 section, u64 memory_type)
+{
+ u64 *page_table = (u64 *)gd->arch.tlb_addr;
+ u64 value;
+
+ value = (section << SECTION_SHIFT) | PMD_TYPE_SECT | PMD_SECT_AF;
+ value |= PMD_ATTRINDX(memory_type);
+ page_table[section] = value;
+}
+
+/* to activate the MMU we need to set up virtual memory */
+static void mmu_setup(void)
+{
+ int i, j, el;
+ bd_t *bd = gd->bd;
+
+ /* Setup an identity-mapping for all spaces */
+ for (i = 0; i < (PGTABLE_SIZE >> 3); i++)
+ set_pgtable_section(i, MT_DEVICE_NGNRNE);
+
+ /* Setup an identity-mapping for all RAM space */
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ ulong start = bd->bi_dram[i].start;
+ ulong end = bd->bi_dram[i].start + bd->bi_dram[i].size;
+ for (j = start >> SECTION_SHIFT;
+ j < end >> SECTION_SHIFT; j++) {
+ set_pgtable_section(j, MT_NORMAL);
+ }
+ }
+
+ /* load TTBR0 */
+ el = current_el();
+ if (el == 1)
+ asm volatile("msr ttbr0_el1, %0"
+ : : "r" (gd->arch.tlb_addr) : "memory");
+ else if (el == 2)
+ asm volatile("msr ttbr0_el2, %0"
+ : : "r" (gd->arch.tlb_addr) : "memory");
+ else
+ asm volatile("msr ttbr0_el3, %0"
+ : : "r" (gd->arch.tlb_addr) : "memory");
+
+ /* enable the mmu */
+ set_sctlr(get_sctlr() | CR_M);
+}
+
+/*
+ * Performs a invalidation of the entire data cache at all levels
+ */
+void invalidate_dcache_all(void)
+{
+ __asm_flush_dcache_all();
+}
+
+/*
+ * Performs a clean & invalidation of the entire data cache at all levels
+ */
+void flush_dcache_all(void)
+{
+ __asm_flush_dcache_all();
+}
+
+/*
+ * Invalidates range in all levels of D-cache/unified cache
+ */
+void invalidate_dcache_range(unsigned long start, unsigned long stop)
+{
+ __asm_flush_dcache_range(start, stop);
+}
+
+/*
+ * Flush range(clean & invalidate) from all levels of D-cache/unified cache
+ */
+void flush_dcache_range(unsigned long start, unsigned long stop)
+{
+ __asm_flush_dcache_range(start, stop);
+}
+
+void dcache_enable(void)
+{
+ /* The data cache is not active unless the mmu is enabled */
+ if (!(get_sctlr() & CR_M)) {
+ invalidate_dcache_all();
+ __asm_invalidate_tlb_all();
+ mmu_setup();
+ }
+
+ set_sctlr(get_sctlr() | CR_C);
+}
+
+void dcache_disable(void)
+{
+ uint32_t sctlr;
+
+ sctlr = get_sctlr();
+
+ /* if cache isn't enabled no need to disable */
+ if (!(sctlr & CR_C))
+ return;
+
+ set_sctlr(sctlr & ~(CR_C|CR_M));
+
+ flush_dcache_all();
+ __asm_invalidate_tlb_all();
+}
+
+int dcache_status(void)
+{
+ return (get_sctlr() & CR_C) != 0;
+}
+
+#else /* CONFIG_SYS_DCACHE_OFF */
+
+void invalidate_dcache_all(void)
+{
+}
+
+void flush_dcache_all(void)
+{
+}
+
+void invalidate_dcache_range(unsigned long start, unsigned long stop)
+{
+}
+
+void flush_dcache_range(unsigned long start, unsigned long stop)
+{
+}
+
+void dcache_enable(void)
+{
+}
+
+void dcache_disable(void)
+{
+}
+
+int dcache_status(void)
+{
+ return 0;
+}
+
+#endif /* CONFIG_SYS_DCACHE_OFF */
+
+#ifndef CONFIG_SYS_ICACHE_OFF
+
+void icache_enable(void)
+{
+ set_sctlr(get_sctlr() | CR_I);
+}
+
+void icache_disable(void)
+{
+ set_sctlr(get_sctlr() & ~CR_I);
+}
+
+int icache_status(void)
+{
+ return (get_sctlr() & CR_I) != 0;
+}
+
+void invalidate_icache_all(void)
+{
+ __asm_invalidate_icache_all();
+}
+
+#else /* CONFIG_SYS_ICACHE_OFF */
+
+void icache_enable(void)
+{
+}
+
+void icache_disable(void)
+{
+}
+
+int icache_status(void)
+{
+ return 0;
+}
+
+void invalidate_icache_all(void)
+{
+}
+
+#endif /* CONFIG_SYS_ICACHE_OFF */
+
+/*
+ * Enable dCache & iCache, whether cache is actually enabled
+ * depend on CONFIG_SYS_DCACHE_OFF and CONFIG_SYS_ICACHE_OFF
+ */
+void enable_caches(void)
+{
+ icache_enable();
+ dcache_enable();
+}
+
+/*
+ * Flush range from all levels of d-cache/unified-cache
+ */
+void flush_cache(unsigned long start, unsigned long size)
+{
+ flush_dcache_range(start, start + size);
+}
diff --git a/arch/arm/cpu/armv8/config.mk b/arch/arm/cpu/armv8/config.mk
new file mode 100644
index 0000000..027a68c
--- /dev/null
+++ b/arch/arm/cpu/armv8/config.mk
@@ -0,0 +1,15 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+PLATFORM_RELFLAGS += -fno-common -ffixed-x18
+
+# SEE README.arm-unaligned-accesses
+PF_NO_UNALIGNED := $(call cc-option, -mstrict-align)
+PLATFORM_NO_UNALIGNED := $(PF_NO_UNALIGNED)
+
+PF_CPPFLAGS_ARMV8 := $(call cc-option, -march=armv8-a)
+PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_ARMV8)
+PLATFORM_CPPFLAGS += $(PF_NO_UNALIGNED)
diff --git a/arch/arm/cpu/armv8/cpu.c b/arch/arm/cpu/armv8/cpu.c
new file mode 100644
index 0000000..e06c3cc
--- /dev/null
+++ b/arch/arm/cpu/armv8/cpu.c
@@ -0,0 +1,43 @@
+/*
+ * (C) Copyright 2008 Texas Insturments
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/system.h>
+#include <linux/compiler.h>
+
+int cleanup_before_linux(void)
+{
+ /*
+ * this function is called just before we call linux
+ * it prepares the processor for linux
+ *
+ * disable interrupt and turn off caches etc ...
+ */
+ disable_interrupts();
+
+ /*
+ * Turn off I-cache and invalidate it
+ */
+ icache_disable();
+ invalidate_icache_all();
+
+ /*
+ * turn off D-cache
+ * dcache_disable() in turn flushes the d-cache and disables MMU
+ */
+ dcache_disable();
+ invalidate_dcache_all();
+
+ return 0;
+}
diff --git a/arch/arm/cpu/armv8/exceptions.S b/arch/arm/cpu/armv8/exceptions.S
new file mode 100644
index 0000000..b91a1b6
--- /dev/null
+++ b/arch/arm/cpu/armv8/exceptions.S
@@ -0,0 +1,113 @@
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <version.h>
+#include <asm/ptrace.h>
+#include <asm/macro.h>
+#include <linux/linkage.h>
+
+/*
+ * Enter Exception.
+ * This will save the processor state that is ELR/X0~X30
+ * to the stack frame.
+ */
+.macro exception_entry
+ stp x29, x30, [sp, #-16]!
+ stp x27, x28, [sp, #-16]!
+ stp x25, x26, [sp, #-16]!
+ stp x23, x24, [sp, #-16]!
+ stp x21, x22, [sp, #-16]!
+ stp x19, x20, [sp, #-16]!
+ stp x17, x18, [sp, #-16]!
+ stp x15, x16, [sp, #-16]!
+ stp x13, x14, [sp, #-16]!
+ stp x11, x12, [sp, #-16]!
+ stp x9, x10, [sp, #-16]!
+ stp x7, x8, [sp, #-16]!
+ stp x5, x6, [sp, #-16]!
+ stp x3, x4, [sp, #-16]!
+ stp x1, x2, [sp, #-16]!
+
+ /* Could be running at EL3/EL2/EL1 */
+ switch_el x11, 3f, 2f, 1f
+3: mrs x1, esr_el3
+ mrs x2, elr_el3
+ b 0f
+2: mrs x1, esr_el2
+ mrs x2, elr_el2
+ b 0f
+1: mrs x1, esr_el1
+ mrs x2, elr_el1
+0:
+ stp x2, x0, [sp, #-16]!
+ mov x0, sp
+.endm
+
+/*
+ * Exception vectors.
+ */
+ .align 11
+ .globl vectors
+vectors:
+ .align 7
+ b _do_bad_sync /* Current EL Synchronous Thread */
+
+ .align 7
+ b _do_bad_irq /* Current EL IRQ Thread */
+
+ .align 7
+ b _do_bad_fiq /* Current EL FIQ Thread */
+
+ .align 7
+ b _do_bad_error /* Current EL Error Thread */
+
+ .align 7
+ b _do_sync /* Current EL Synchronous Handler */
+
+ .align 7
+ b _do_irq /* Current EL IRQ Handler */
+
+ .align 7
+ b _do_fiq /* Current EL FIQ Handler */
+
+ .align 7
+ b _do_error /* Current EL Error Handler */
+
+
+_do_bad_sync:
+ exception_entry
+ bl do_bad_sync
+
+_do_bad_irq:
+ exception_entry
+ bl do_bad_irq
+
+_do_bad_fiq:
+ exception_entry
+ bl do_bad_fiq
+
+_do_bad_error:
+ exception_entry
+ bl do_bad_error
+
+_do_sync:
+ exception_entry
+ bl do_sync
+
+_do_irq:
+ exception_entry
+ bl do_irq
+
+_do_fiq:
+ exception_entry
+ bl do_fiq
+
+_do_error:
+ exception_entry
+ bl do_error
diff --git a/arch/arm/cpu/armv8/generic_timer.c b/arch/arm/cpu/armv8/generic_timer.c
new file mode 100644
index 0000000..223b95e
--- /dev/null
+++ b/arch/arm/cpu/armv8/generic_timer.c
@@ -0,0 +1,31 @@
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/system.h>
+
+/*
+ * Generic timer implementation of get_tbclk()
+ */
+unsigned long get_tbclk(void)
+{
+ unsigned long cntfrq;
+ asm volatile("mrs %0, cntfrq_el0" : "=r" (cntfrq));
+ return cntfrq;
+}
+
+/*
+ * Generic timer implementation of timer_read_counter()
+ */
+unsigned long timer_read_counter(void)
+{
+ unsigned long cntpct;
+ isb();
+ asm volatile("mrs %0, cntpct_el0" : "=r" (cntpct));
+ return cntpct;
+}
diff --git a/arch/arm/cpu/armv8/gic.S b/arch/arm/cpu/armv8/gic.S
new file mode 100644
index 0000000..599aa8f
--- /dev/null
+++ b/arch/arm/cpu/armv8/gic.S
@@ -0,0 +1,106 @@
+/*
+ * GIC Initialization Routines.
+ *
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <linux/linkage.h>
+#include <asm/macro.h>
+#include <asm/gic.h>
+
+
+/*************************************************************************
+ *
+ * void gic_init(void) __attribute__((weak));
+ *
+ * Currently, this routine only initialize secure copy of GIC
+ * with Security Extensions at EL3.
+ *
+ *************************************************************************/
+WEAK(gic_init)
+ branch_if_slave x0, 2f
+
+ /* Initialize Distributor and SPIs */
+ ldr x1, =GICD_BASE
+ mov w0, #0x3 /* EnableGrp0 | EnableGrp1 */
+ str w0, [x1, GICD_CTLR] /* Secure GICD_CTLR */
+ ldr w0, [x1, GICD_TYPER]
+ and w2, w0, #0x1f /* ITLinesNumber */
+ cbz w2, 2f /* No SPIs */
+ add x1, x1, (GICD_IGROUPRn + 4)
+ mov w0, #~0 /* Config SPIs as Grp1 */
+1: str w0, [x1], #0x4
+ sub w2, w2, #0x1
+ cbnz w2, 1b
+
+ /* Initialize SGIs and PPIs */
+2: ldr x1, =GICD_BASE
+ mov w0, #~0 /* Config SGIs and PPIs as Grp1 */
+ str w0, [x1, GICD_IGROUPRn] /* GICD_IGROUPR0 */
+ mov w0, #0x1 /* Enable SGI 0 */
+ str w0, [x1, GICD_ISENABLERn]
+
+ /* Initialize Cpu Interface */
+ ldr x1, =GICC_BASE
+ mov w0, #0x1e7 /* Disable IRQ/FIQ Bypass & */
+ /* Enable Ack Group1 Interrupt & */
+ /* EnableGrp0 & EnableGrp1 */
+ str w0, [x1, GICC_CTLR] /* Secure GICC_CTLR */
+
+ mov w0, #0x1 << 7 /* Non-Secure access to GICC_PMR */
+ str w0, [x1, GICC_PMR]
+
+ ret
+ENDPROC(gic_init)
+
+
+/*************************************************************************
+ *
+ * void gic_send_sgi(u64 sgi) __attribute__((weak));
+ *
+ *************************************************************************/
+WEAK(gic_send_sgi)
+ ldr x1, =GICD_BASE
+ mov w2, #0x8000
+ movk w2, #0x100, lsl #16
+ orr w2, w2, w0
+ str w2, [x1, GICD_SGIR]
+ ret
+ENDPROC(gic_send_sgi)
+
+
+/*************************************************************************
+ *
+ * void wait_for_wakeup(void) __attribute__((weak));
+ *
+ * Wait for SGI 0 from master.
+ *
+ *************************************************************************/
+WEAK(wait_for_wakeup)
+ ldr x1, =GICC_BASE
+0: wfi
+ ldr w0, [x1, GICC_AIAR]
+ str w0, [x1, GICC_AEOIR]
+ cbnz w0, 0b
+ ret
+ENDPROC(wait_for_wakeup)
+
+
+/*************************************************************************
+ *
+ * void smp_kick_all_cpus(void) __attribute__((weak));
+ *
+ *************************************************************************/
+WEAK(smp_kick_all_cpus)
+ /* Kick secondary cpus up by SGI 0 interrupt */
+ mov x0, xzr /* SGI 0 */
+ mov x29, lr /* Save LR */
+ bl gic_send_sgi
+ mov lr, x29 /* Restore LR */
+ ret
+ENDPROC(smp_kick_all_cpus)
diff --git a/arch/arm/cpu/armv8/start.S b/arch/arm/cpu/armv8/start.S
new file mode 100644
index 0000000..bcc2603
--- /dev/null
+++ b/arch/arm/cpu/armv8/start.S
@@ -0,0 +1,164 @@
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <version.h>
+#include <linux/linkage.h>
+#include <asm/macro.h>
+#include <asm/armv8/mmu.h>
+
+/*************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ *************************************************************************/
+
+.globl _start
+_start:
+ b reset
+
+ .align 3
+
+.globl _TEXT_BASE
+_TEXT_BASE:
+ .quad CONFIG_SYS_TEXT_BASE
+
+/*
+ * These are defined in the linker script.
+ */
+.globl _end_ofs
+_end_ofs:
+ .quad _end - _start
+
+.globl _bss_start_ofs
+_bss_start_ofs:
+ .quad __bss_start - _start
+
+.globl _bss_end_ofs
+_bss_end_ofs:
+ .quad __bss_end - _start
+
+reset:
+ /*
+ * Could be EL3/EL2/EL1, Initial State:
+ * Little Endian, MMU Disabled, i/dCache Disabled
+ */
+ adr x0, vectors
+ switch_el x1, 3f, 2f, 1f
+3: msr vbar_el3, x0
+ msr cptr_el3, xzr /* Enable FP/SIMD */
+ ldr x0, =COUNTER_FREQUENCY
+ msr cntfrq_el0, x0 /* Initialize CNTFRQ */
+ b 0f
+2: msr vbar_el2, x0
+ mov x0, #0x33ff
+ msr cptr_el2, x0 /* Enable FP/SIMD */
+ b 0f
+1: msr vbar_el1, x0
+ mov x0, #3 << 20
+ msr cpacr_el1, x0 /* Enable FP/SIMD */
+0:
+
+ /* Cache/BPB/TLB Invalidate */
+ bl __asm_flush_dcache_all /* dCache clean&invalidate */
+ bl __asm_invalidate_icache_all /* iCache invalidate */
+ bl __asm_invalidate_tlb_all /* invalidate TLBs */
+
+ /* Processor specific initialization */
+ bl lowlevel_init
+
+ branch_if_master x0, x1, master_cpu
+
+ /*
+ * Slave CPUs
+ */
+slave_cpu:
+ wfe
+ ldr x1, =CPU_RELEASE_ADDR
+ ldr x0, [x1]
+ cbz x0, slave_cpu
+ br x0 /* branch to the given address */
+
+ /*
+ * Master CPU
+ */
+master_cpu:
+ bl _main
+
+/*-----------------------------------------------------------------------*/
+
+WEAK(lowlevel_init)
+ /* Initialize GIC Secure Bank Status */
+ mov x29, lr /* Save LR */
+ bl gic_init
+
+ branch_if_master x0, x1, 1f
+
+ /*
+ * Slave should wait for master clearing spin table.
+ * This sync prevent salves observing incorrect
+ * value of spin table and jumping to wrong place.
+ */
+ bl wait_for_wakeup
+
+ /*
+ * All processors will enter EL2 and optionally EL1.
+ */
+ bl armv8_switch_to_el2
+#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
+ bl armv8_switch_to_el1
+#endif
+
+1:
+ mov lr, x29 /* Restore LR */
+ ret
+ENDPROC(lowlevel_init)
+
+/*-----------------------------------------------------------------------*/
+
+ENTRY(c_runtime_cpu_setup)
+ /* If I-cache is enabled invalidate it */
+#ifndef CONFIG_SYS_ICACHE_OFF
+ ic iallu /* I+BTB cache invalidate */
+ isb sy
+#endif
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+ /*
+ * Setup MAIR and TCR.
+ */
+ ldr x0, =MEMORY_ATTRIBUTES
+ ldr x1, =TCR_FLAGS
+
+ switch_el x2, 3f, 2f, 1f
+3: orr x1, x1, TCR_EL3_IPS_BITS
+ msr mair_el3, x0
+ msr tcr_el3, x1
+ b 0f
+2: orr x1, x1, TCR_EL2_IPS_BITS
+ msr mair_el2, x0
+ msr tcr_el2, x1
+ b 0f
+1: orr x1, x1, TCR_EL1_IPS_BITS
+ msr mair_el1, x0
+ msr tcr_el1, x1
+0:
+#endif
+
+ /* Relocate vBAR */
+ adr x0, vectors
+ switch_el x1, 3f, 2f, 1f
+3: msr vbar_el3, x0
+ b 0f
+2: msr vbar_el2, x0
+ b 0f
+1: msr vbar_el1, x0
+0:
+
+ ret
+ENDPROC(c_runtime_cpu_setup)
diff --git a/arch/arm/cpu/armv8/tlb.S b/arch/arm/cpu/armv8/tlb.S
new file mode 100644
index 0000000..f840b04
--- /dev/null
+++ b/arch/arm/cpu/armv8/tlb.S
@@ -0,0 +1,34 @@
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <version.h>
+#include <linux/linkage.h>
+#include <asm/macro.h>
+
+/*
+ * void __asm_invalidate_tlb_all(void)
+ *
+ * invalidate all tlb entries.
+ */
+ENTRY(__asm_invalidate_tlb_all)
+ switch_el x9, 3f, 2f, 1f
+3: tlbi alle3
+ dsb sy
+ isb
+ b 0f
+2: tlbi alle2
+ dsb sy
+ isb
+ b 0f
+1: tlbi vmalle1
+ dsb sy
+ isb
+0:
+ ret
+ENDPROC(__asm_invalidate_tlb_all)
diff --git a/arch/arm/cpu/armv8/transition.S b/arch/arm/cpu/armv8/transition.S
new file mode 100644
index 0000000..e0a5946
--- /dev/null
+++ b/arch/arm/cpu/armv8/transition.S
@@ -0,0 +1,83 @@
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <version.h>
+#include <linux/linkage.h>
+#include <asm/macro.h>
+
+ENTRY(armv8_switch_to_el2)
+ switch_el x0, 1f, 0f, 0f
+0: ret
+1:
+ mov x0, #0x5b1 /* Non-secure EL0/EL1 | HVC | 64bit EL2 */
+ msr scr_el3, x0
+ msr cptr_el3, xzr /* Disable coprocessor traps to EL3 */
+ mov x0, #0x33ff
+ msr cptr_el2, x0 /* Disable coprocessor traps to EL2 */
+
+ /* Initialize SCTLR_EL2 */
+ msr sctlr_el2, xzr
+
+ /* Return to the EL2_SP2 mode from EL3 */
+ mov x0, sp
+ msr sp_el2, x0 /* Migrate SP */
+ mrs x0, vbar_el3
+ msr vbar_el2, x0 /* Migrate VBAR */
+ mov x0, #0x3c9
+ msr spsr_el3, x0 /* EL2_SP2 | D | A | I | F */
+ msr elr_el3, lr
+ eret
+ENDPROC(armv8_switch_to_el2)
+
+ENTRY(armv8_switch_to_el1)
+ switch_el x0, 0f, 1f, 0f
+0: ret
+1:
+ /* Initialize Generic Timers */
+ mrs x0, cnthctl_el2
+ orr x0, x0, #0x3 /* Enable EL1 access to timers */
+ msr cnthctl_el2, x0
+ msr cntvoff_el2, x0
+ mrs x0, cntkctl_el1
+ orr x0, x0, #0x3 /* Enable EL0 access to timers */
+ msr cntkctl_el1, x0
+
+ /* Initilize MPID/MPIDR registers */
+ mrs x0, midr_el1
+ mrs x1, mpidr_el1
+ msr vpidr_el2, x0
+ msr vmpidr_el2, x1
+
+ /* Disable coprocessor traps */
+ mov x0, #0x33ff
+ msr cptr_el2, x0 /* Disable coprocessor traps to EL2 */
+ msr hstr_el2, xzr /* Disable coprocessor traps to EL2 */
+ mov x0, #3 << 20
+ msr cpacr_el1, x0 /* Enable FP/SIMD at EL1 */
+
+ /* Initialize HCR_EL2 */
+ mov x0, #(1 << 31) /* 64bit EL1 */
+ orr x0, x0, #(1 << 29) /* Disable HVC */
+ msr hcr_el2, x0
+
+ /* SCTLR_EL1 initialization */
+ mov x0, #0x0800
+ movk x0, #0x30d0, lsl #16
+ msr sctlr_el1, x0
+
+ /* Return to the EL1_SP1 mode from EL2 */
+ mov x0, sp
+ msr sp_el1, x0 /* Migrate SP */
+ mrs x0, vbar_el2
+ msr vbar_el1, x0 /* Migrate VBAR */
+ mov x0, #0x3c5
+ msr spsr_el2, x0 /* EL1_SP1 | D | A | I | F */
+ msr elr_el2, lr
+ eret
+ENDPROC(armv8_switch_to_el1)
diff --git a/arch/arm/cpu/armv8/u-boot.lds b/arch/arm/cpu/armv8/u-boot.lds
new file mode 100644
index 0000000..4c12222
--- /dev/null
+++ b/arch/arm/cpu/armv8/u-boot.lds
@@ -0,0 +1,89 @@
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+OUTPUT_FORMAT("elf64-littleaarch64", "elf64-littleaarch64", "elf64-littleaarch64")
+OUTPUT_ARCH(aarch64)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(8);
+ .text :
+ {
+ *(.__image_copy_start)
+ CPUDIR/start.o (.text*)
+ *(.text*)
+ }
+
+ . = ALIGN(8);
+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+ . = ALIGN(8);
+ .data : {
+ *(.data*)
+ }
+
+ . = ALIGN(8);
+
+ . = .;
+
+ . = ALIGN(8);
+ .u_boot_list : {
+ KEEP(*(SORT(.u_boot_list*)));
+ }
+
+ . = ALIGN(8);
+
+ .image_copy_end :
+ {
+ *(.__image_copy_end)
+ }
+
+ . = ALIGN(8);
+
+ .rel_dyn_start :
+ {
+ *(.__rel_dyn_start)
+ }
+
+ .rela.dyn : {
+ *(.rela*)
+ }
+
+ .rel_dyn_end :
+ {
+ *(.__rel_dyn_end)
+ }
+
+ _end = .;
+
+ . = ALIGN(8);
+
+ .bss_start : {
+ KEEP(*(.__bss_start));
+ }
+
+ .bss : {
+ *(.bss*)
+ . = ALIGN(8);
+ }
+
+ .bss_end : {
+ KEEP(*(.__bss_end));
+ }
+
+ /DISCARD/ : { *(.dynsym) }
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
+}
diff --git a/arch/arm/cpu/pxa/config.mk b/arch/arm/cpu/pxa/config.mk
index d8d263d..f2befbe 100644
--- a/arch/arm/cpu/pxa/config.mk
+++ b/arch/arm/cpu/pxa/config.mk
@@ -14,3 +14,16 @@
# ========================================================================
PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT)
+
+#
+# !WARNING!
+# The PXA's OneNAND SPL uses .text.0 and .text.1 segments to allow booting from
+# really small OneNAND memories where the mmap'd window is only 1KiB big. The
+# .text.0 contains only the bare minimum needed to load the real SPL into SRAM.
+# Add .text.0 and .text.1 into OBJFLAGS, so when the SPL is being objcopy'd,
+# they are not discarded.
+#
+
+#ifdef CONFIG_SPL_BUILD
+OBJCFLAGS += -j .text.0 -j .text.1
+#endif
diff --git a/arch/arm/cpu/pxa/timer.c b/arch/arm/cpu/pxa/timer.c
index 78d9f32..c4717de 100644
--- a/arch/arm/cpu/pxa/timer.c
+++ b/arch/arm/cpu/pxa/timer.c
@@ -28,12 +28,12 @@
static unsigned long long tick_to_time(unsigned long long tick)
{
- return tick * CONFIG_SYS_HZ / TIMER_FREQ_HZ;
+ return lldiv(tick * CONFIG_SYS_HZ, TIMER_FREQ_HZ);
}
static unsigned long long us_to_tick(unsigned long long us)
{
- return (us * TIMER_FREQ_HZ) / 1000000;
+ return lldiv(us * TIMER_FREQ_HZ, 1000000);
}
int timer_init(void)
diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds
index 9463a33..4da5d24 100644
--- a/arch/arm/cpu/u-boot.lds
+++ b/arch/arm/cpu/u-boot.lds
@@ -92,8 +92,6 @@
}
.dynsym _end : { *(.dynsym) }
- .hash : { *(.hash) }
- .got.plt : { *(.got.plt) }
.dynbss : { *(.dynbss) }
.dynstr : { *(.dynstr*) }
.dynamic : { *(.dynamic*) }
@@ -101,4 +99,5 @@
.interp : { *(.interp*) }
.gnu : { *(.gnu*) }
.ARM.exidx : { *(.ARM.exidx*) }
+ .gnu.linkonce.armexidx : { *(.gnu.linkonce.armexidx.*) }
}
diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi
new file mode 100644
index 0000000..f20b8bd
--- /dev/null
+++ b/arch/arm/dts/zynq-7000.dtsi
@@ -0,0 +1,13 @@
+/*
+ * Xilinx Zynq 7000 DTSI
+ * Describes the hardware common to all Zynq 7000-based boards.
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "xlnx,zynq-7000";
+};
diff --git a/arch/arm/include/asm/arch-socfpga/dwmmc.h b/arch/arm/include/asm/arch-socfpga/dwmmc.h
new file mode 100644
index 0000000..945eb64
--- /dev/null
+++ b/arch/arm/include/asm/arch-socfpga/dwmmc.h
@@ -0,0 +1,12 @@
+/*
+ * (C) Copyright 2013 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _SOCFPGA_DWMMC_H_
+#define _SOCFPGA_DWMMC_H_
+
+extern int socfpga_dwmmc_init(u32 regbase, int bus_width, int index);
+
+#endif /* _SOCFPGA_SDMMC_H_ */
diff --git a/arch/arm/include/asm/arch-socfpga/system_manager.h b/arch/arm/include/asm/arch-socfpga/system_manager.h
index d965d25..838d210 100644
--- a/arch/arm/include/asm/arch-socfpga/system_manager.h
+++ b/arch/arm/include/asm/arch-socfpga/system_manager.h
@@ -19,4 +19,69 @@
#define CONFIG_SYSMGR_PINMUXGRP_OFFSET (0x400)
+#define SYSMGR_SDMMC_CTRL_SET(smplsel, drvsel) \
+ ((((drvsel) << 0) & 0x7) | (((smplsel) << 3) & 0x38))
+
+struct socfpga_system_manager {
+ u32 siliconid1;
+ u32 siliconid2;
+ u32 _pad_0x8_0xf[2];
+ u32 wddbg;
+ u32 bootinfo;
+ u32 hpsinfo;
+ u32 parityinj;
+ u32 fpgaintfgrp_gbl;
+ u32 fpgaintfgrp_indiv;
+ u32 fpgaintfgrp_module;
+ u32 _pad_0x2c_0x2f;
+ u32 scanmgrgrp_ctrl;
+ u32 _pad_0x34_0x3f[3];
+ u32 frzctrl_vioctrl;
+ u32 _pad_0x44_0x4f[3];
+ u32 frzctrl_hioctrl;
+ u32 frzctrl_src;
+ u32 frzctrl_hwctrl;
+ u32 _pad_0x5c_0x5f;
+ u32 emacgrp_ctrl;
+ u32 emacgrp_l3master;
+ u32 _pad_0x68_0x6f[2];
+ u32 dmagrp_ctrl;
+ u32 dmagrp_persecurity;
+ u32 _pad_0x78_0x7f[2];
+ u32 iswgrp_handoff[8];
+ u32 _pad_0xa0_0xbf[8];
+ u32 romcodegrp_ctrl;
+ u32 romcodegrp_cpu1startaddr;
+ u32 romcodegrp_initswstate;
+ u32 romcodegrp_initswlastld;
+ u32 romcodegrp_bootromswstate;
+ u32 __pad_0xd4_0xdf[3];
+ u32 romcodegrp_warmramgrp_enable;
+ u32 romcodegrp_warmramgrp_datastart;
+ u32 romcodegrp_warmramgrp_length;
+ u32 romcodegrp_warmramgrp_execution;
+ u32 romcodegrp_warmramgrp_crc;
+ u32 __pad_0xf4_0xff[3];
+ u32 romhwgrp_ctrl;
+ u32 _pad_0x104_0x107;
+ u32 sdmmcgrp_ctrl;
+ u32 sdmmcgrp_l3master;
+ u32 nandgrp_bootstrap;
+ u32 nandgrp_l3master;
+ u32 usbgrp_l3master;
+ u32 _pad_0x11c_0x13f[9];
+ u32 eccgrp_l2;
+ u32 eccgrp_ocram;
+ u32 eccgrp_usb0;
+ u32 eccgrp_usb1;
+ u32 eccgrp_emac0;
+ u32 eccgrp_emac1;
+ u32 eccgrp_dma;
+ u32 eccgrp_can0;
+ u32 eccgrp_can1;
+ u32 eccgrp_nand;
+ u32 eccgrp_qspi;
+ u32 eccgrp_sdmmc;
+};
+
#endif /* _SYSTEM_MANAGER_H_ */
diff --git a/arch/arm/include/asm/arch-zynq/gpio.h b/arch/arm/include/asm/arch-zynq/gpio.h
new file mode 100644
index 0000000..2dbba75
--- /dev/null
+++ b/arch/arm/include/asm/arch-zynq/gpio.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2013 Xilinx, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ZYNQ_GPIO_H
+#define _ZYNQ_GPIO_H
+
+inline int gpio_get_value(unsigned gpio)
+{
+ return 0;
+}
+
+inline int gpio_set_value(unsigned gpio, int val)
+{
+ return 0;
+}
+
+inline int gpio_request(unsigned gpio, const char *label)
+{
+ return 0;
+}
+
+#endif /* _ZYNQ_GPIO_H */
diff --git a/arch/arm/include/asm/arch-zynq/sys_proto.h b/arch/arm/include/asm/arch-zynq/sys_proto.h
index 110de90..8f925af 100644
--- a/arch/arm/include/asm/arch-zynq/sys_proto.h
+++ b/arch/arm/include/asm/arch-zynq/sys_proto.h
@@ -13,6 +13,7 @@
extern void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk);
extern void zynq_slcr_devcfg_disable(void);
extern void zynq_slcr_devcfg_enable(void);
+extern u32 zynq_slcr_get_boot_mode(void);
extern u32 zynq_slcr_get_idcode(void);
extern void zynq_ddrc_init(void);
diff --git a/arch/arm/include/asm/armv8/mmu.h b/arch/arm/include/asm/armv8/mmu.h
new file mode 100644
index 0000000..1193e76
--- /dev/null
+++ b/arch/arm/include/asm/armv8/mmu.h
@@ -0,0 +1,111 @@
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ASM_ARMV8_MMU_H_
+#define _ASM_ARMV8_MMU_H_
+
+#ifdef __ASSEMBLY__
+#define _AC(X, Y) X
+#else
+#define _AC(X, Y) (X##Y)
+#endif
+
+#define UL(x) _AC(x, UL)
+
+/***************************************************************/
+/*
+ * The following definitions are related each other, shoud be
+ * calculated specifically.
+ */
+#define VA_BITS (42) /* 42 bits virtual address */
+
+/* PAGE_SHIFT determines the page size */
+#undef PAGE_SIZE
+#define PAGE_SHIFT 16
+#define PAGE_SIZE (1 << PAGE_SHIFT)
+#define PAGE_MASK (~(PAGE_SIZE-1))
+
+/*
+ * section address mask and size definitions.
+ */
+#define SECTION_SHIFT 29
+#define SECTION_SIZE (UL(1) << SECTION_SHIFT)
+#define SECTION_MASK (~(SECTION_SIZE-1))
+/***************************************************************/
+
+/*
+ * Memory types
+ */
+#define MT_DEVICE_NGNRNE 0
+#define MT_DEVICE_NGNRE 1
+#define MT_DEVICE_GRE 2
+#define MT_NORMAL_NC 3
+#define MT_NORMAL 4
+
+#define MEMORY_ATTRIBUTES ((0x00 << (MT_DEVICE_NGNRNE*8)) | \
+ (0x04 << (MT_DEVICE_NGNRE*8)) | \
+ (0x0c << (MT_DEVICE_GRE*8)) | \
+ (0x44 << (MT_NORMAL_NC*8)) | \
+ (UL(0xff) << (MT_NORMAL*8)))
+
+/*
+ * Hardware page table definitions.
+ *
+ * Level 2 descriptor (PMD).
+ */
+#define PMD_TYPE_MASK (3 << 0)
+#define PMD_TYPE_FAULT (0 << 0)
+#define PMD_TYPE_TABLE (3 << 0)
+#define PMD_TYPE_SECT (1 << 0)
+
+/*
+ * Section
+ */
+#define PMD_SECT_S (3 << 8)
+#define PMD_SECT_AF (1 << 10)
+#define PMD_SECT_NG (1 << 11)
+#define PMD_SECT_PXN (UL(1) << 53)
+#define PMD_SECT_UXN (UL(1) << 54)
+
+/*
+ * AttrIndx[2:0]
+ */
+#define PMD_ATTRINDX(t) ((t) << 2)
+#define PMD_ATTRINDX_MASK (7 << 2)
+
+/*
+ * TCR flags.
+ */
+#define TCR_T0SZ(x) ((64 - (x)) << 0)
+#define TCR_IRGN_NC (0 << 8)
+#define TCR_IRGN_WBWA (1 << 8)
+#define TCR_IRGN_WT (2 << 8)
+#define TCR_IRGN_WBNWA (3 << 8)
+#define TCR_IRGN_MASK (3 << 8)
+#define TCR_ORGN_NC (0 << 10)
+#define TCR_ORGN_WBWA (1 << 10)
+#define TCR_ORGN_WT (2 << 10)
+#define TCR_ORGN_WBNWA (3 << 10)
+#define TCR_ORGN_MASK (3 << 10)
+#define TCR_SHARED_NON (0 << 12)
+#define TCR_SHARED_OUTER (1 << 12)
+#define TCR_SHARED_INNER (2 << 12)
+#define TCR_TG0_4K (0 << 14)
+#define TCR_TG0_64K (1 << 14)
+#define TCR_TG0_16K (2 << 14)
+#define TCR_EL1_IPS_BITS (UL(3) << 32) /* 42 bits physical address */
+#define TCR_EL2_IPS_BITS (3 << 16) /* 42 bits physical address */
+#define TCR_EL3_IPS_BITS (3 << 16) /* 42 bits physical address */
+
+/* PTWs cacheable, inner/outer WBWA and non-shareable */
+#define TCR_FLAGS (TCR_TG0_64K | \
+ TCR_SHARED_NON | \
+ TCR_ORGN_WBWA | \
+ TCR_IRGN_WBWA | \
+ TCR_T0SZ(VA_BITS))
+
+#endif /* _ASM_ARMV8_MMU_H_ */
diff --git a/arch/arm/include/asm/byteorder.h b/arch/arm/include/asm/byteorder.h
index c3489f1..20cce76 100644
--- a/arch/arm/include/asm/byteorder.h
+++ b/arch/arm/include/asm/byteorder.h
@@ -23,7 +23,7 @@
# define __SWAB_64_THRU_32__
#endif
-#ifdef __ARMEB__
+#if defined(__ARMEB__) || defined(__AARCH64EB__)
#include <linux/byteorder/big_endian.h>
#else
#include <linux/byteorder/little_endian.h>
diff --git a/arch/arm/include/asm/cache.h b/arch/arm/include/asm/cache.h
index 6d60a4a..ddebbc8 100644
--- a/arch/arm/include/asm/cache.h
+++ b/arch/arm/include/asm/cache.h
@@ -11,6 +11,8 @@
#include <asm/system.h>
+#ifndef CONFIG_ARM64
+
/*
* Invalidate L2 Cache using co-proc instruction
*/
@@ -28,6 +30,9 @@
void set_section_dcache(int section, enum dcache_option option);
void dram_bank_mmu_setup(int bank);
+
+#endif
+
/*
* The current upper bound for ARM L1 data cache line sizes is 64 bytes. We
* use that value for aligning DMA buffers unless the board config has specified
diff --git a/arch/arm/include/asm/config.h b/arch/arm/include/asm/config.h
index 99b703e..abf79e5 100644
--- a/arch/arm/include/asm/config.h
+++ b/arch/arm/include/asm/config.h
@@ -9,4 +9,10 @@
#define CONFIG_LMB
#define CONFIG_SYS_BOOT_RAMDISK_HIGH
+
+#ifdef CONFIG_ARM64
+#define CONFIG_PHYS_64BIT
+#define CONFIG_STATIC_RELA
+#endif
+
#endif
diff --git a/arch/arm/include/asm/gic.h b/arch/arm/include/asm/gic.h
index a0891cc..ac2b2bf 100644
--- a/arch/arm/include/asm/gic.h
+++ b/arch/arm/include/asm/gic.h
@@ -1,19 +1,54 @@
-#ifndef __GIC_V2_H__
-#define __GIC_V2_H__
+#ifndef __GIC_H__
+#define __GIC_H__
-/* register offsets for the ARM generic interrupt controller (GIC) */
+/* Register offsets for the ARM generic interrupt controller (GIC) */
#define GIC_DIST_OFFSET 0x1000
-#define GICD_CTLR 0x0000
-#define GICD_TYPER 0x0004
-#define GICD_IGROUPRn 0x0080
-#define GICD_SGIR 0x0F00
-
#define GIC_CPU_OFFSET_A9 0x0100
#define GIC_CPU_OFFSET_A15 0x2000
+
+/* Distributor Registers */
+#define GICD_CTLR 0x0000
+#define GICD_TYPER 0x0004
+#define GICD_IIDR 0x0008
+#define GICD_STATUSR 0x0010
+#define GICD_SETSPI_NSR 0x0040
+#define GICD_CLRSPI_NSR 0x0048
+#define GICD_SETSPI_SR 0x0050
+#define GICD_CLRSPI_SR 0x0058
+#define GICD_SEIR 0x0068
+#define GICD_IGROUPRn 0x0080
+#define GICD_ISENABLERn 0x0100
+#define GICD_ICENABLERn 0x0180
+#define GICD_ISPENDRn 0x0200
+#define GICD_ICPENDRn 0x0280
+#define GICD_ISACTIVERn 0x0300
+#define GICD_ICACTIVERn 0x0380
+#define GICD_IPRIORITYRn 0x0400
+#define GICD_ITARGETSRn 0x0800
+#define GICD_ICFGR 0x0c00
+#define GICD_IGROUPMODRn 0x0d00
+#define GICD_NSACRn 0x0e00
+#define GICD_SGIR 0x0f00
+#define GICD_CPENDSGIRn 0x0f10
+#define GICD_SPENDSGIRn 0x0f20
+#define GICD_IROUTERn 0x6000
+
+/* Cpu Interface Memory Mapped Registers */
#define GICC_CTLR 0x0000
#define GICC_PMR 0x0004
+#define GICC_BPR 0x0008
#define GICC_IAR 0x000C
#define GICC_EOIR 0x0010
+#define GICC_RPR 0x0014
+#define GICC_HPPIR 0x0018
+#define GICC_ABPR 0x001c
+#define GICC_AIAR 0x0020
+#define GICC_AEOIR 0x0024
+#define GICC_AHPPIR 0x0028
+#define GICC_APRn 0x00d0
+#define GICC_NSAPRn 0x00e0
+#define GICC_IIDR 0x00fc
+#define GICC_DIR 0x1000
-#endif
+#endif /* __GIC_H__ */
diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h
index e126436..60e8726 100644
--- a/arch/arm/include/asm/global_data.h
+++ b/arch/arm/include/asm/global_data.h
@@ -47,6 +47,10 @@
#include <asm-generic/global_data.h>
-#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r9")
+#ifdef CONFIG_ARM64
+#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("x18")
+#else
+#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r9")
+#endif
#endif /* __ASM_GBL_DATA_H */
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 1fbc531..6a1f05a 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -75,42 +75,45 @@
#define __arch_putw(v,a) (*(volatile unsigned short *)(a) = (v))
#define __arch_putl(v,a) (*(volatile unsigned int *)(a) = (v))
-extern inline void __raw_writesb(unsigned int addr, const void *data, int bytelen)
+extern inline void __raw_writesb(unsigned long addr, const void *data,
+ int bytelen)
{
uint8_t *buf = (uint8_t *)data;
while(bytelen--)
__arch_putb(*buf++, addr);
}
-extern inline void __raw_writesw(unsigned int addr, const void *data, int wordlen)
+extern inline void __raw_writesw(unsigned long addr, const void *data,
+ int wordlen)
{
uint16_t *buf = (uint16_t *)data;
while(wordlen--)
__arch_putw(*buf++, addr);
}
-extern inline void __raw_writesl(unsigned int addr, const void *data, int longlen)
+extern inline void __raw_writesl(unsigned long addr, const void *data,
+ int longlen)
{
uint32_t *buf = (uint32_t *)data;
while(longlen--)
__arch_putl(*buf++, addr);
}
-extern inline void __raw_readsb(unsigned int addr, void *data, int bytelen)
+extern inline void __raw_readsb(unsigned long addr, void *data, int bytelen)
{
uint8_t *buf = (uint8_t *)data;
while(bytelen--)
*buf++ = __arch_getb(addr);
}
-extern inline void __raw_readsw(unsigned int addr, void *data, int wordlen)
+extern inline void __raw_readsw(unsigned long addr, void *data, int wordlen)
{
uint16_t *buf = (uint16_t *)data;
while(wordlen--)
*buf++ = __arch_getw(addr);
}
-extern inline void __raw_readsl(unsigned int addr, void *data, int longlen)
+extern inline void __raw_readsl(unsigned long addr, void *data, int longlen)
{
uint32_t *buf = (uint32_t *)data;
while(longlen--)
diff --git a/arch/arm/include/asm/macro.h b/arch/arm/include/asm/macro.h
index ff13f36..f77e4b8 100644
--- a/arch/arm/include/asm/macro.h
+++ b/arch/arm/include/asm/macro.h
@@ -54,5 +54,58 @@
bcs 1b
.endm
+#ifdef CONFIG_ARM64
+/*
+ * Register aliases.
+ */
+lr .req x30
+
+/*
+ * Branch according to exception level
+ */
+.macro switch_el, xreg, el3_label, el2_label, el1_label
+ mrs \xreg, CurrentEL
+ cmp \xreg, 0xc
+ b.eq \el3_label
+ cmp \xreg, 0x8
+ b.eq \el2_label
+ cmp \xreg, 0x4
+ b.eq \el1_label
+.endm
+
+/*
+ * Branch if current processor is a slave,
+ * choose processor with all zero affinity value as the master.
+ */
+.macro branch_if_slave, xreg, slave_label
+ mrs \xreg, mpidr_el1
+ tst \xreg, #0xff /* Test Affinity 0 */
+ b.ne \slave_label
+ lsr \xreg, \xreg, #8
+ tst \xreg, #0xff /* Test Affinity 1 */
+ b.ne \slave_label
+ lsr \xreg, \xreg, #8
+ tst \xreg, #0xff /* Test Affinity 2 */
+ b.ne \slave_label
+ lsr \xreg, \xreg, #16
+ tst \xreg, #0xff /* Test Affinity 3 */
+ b.ne \slave_label
+.endm
+
+/*
+ * Branch if current processor is a master,
+ * choose processor with all zero affinity value as the master.
+ */
+.macro branch_if_master, xreg1, xreg2, master_label
+ mrs \xreg1, mpidr_el1
+ lsr \xreg2, \xreg1, #32
+ lsl \xreg1, \xreg1, #40
+ lsr \xreg1, \xreg1, #40
+ orr \xreg1, \xreg1, \xreg2
+ cbz \xreg1, \master_label
+.endm
+
+#endif /* CONFIG_ARM64 */
+
#endif /* __ASSEMBLY__ */
#endif /* __ASM_ARM_MACRO_H__ */
diff --git a/arch/arm/include/asm/posix_types.h b/arch/arm/include/asm/posix_types.h
index c412486..d254b95 100644
--- a/arch/arm/include/asm/posix_types.h
+++ b/arch/arm/include/asm/posix_types.h
@@ -28,9 +28,17 @@
typedef unsigned short __kernel_ipc_pid_t;
typedef unsigned short __kernel_uid_t;
typedef unsigned short __kernel_gid_t;
+
+#ifdef __aarch64__
+typedef unsigned long __kernel_size_t;
+typedef long __kernel_ssize_t;
+typedef long __kernel_ptrdiff_t;
+#else
typedef unsigned int __kernel_size_t;
typedef int __kernel_ssize_t;
typedef int __kernel_ptrdiff_t;
+#endif
+
typedef long __kernel_time_t;
typedef long __kernel_suseconds_t;
typedef long __kernel_clock_t;
diff --git a/arch/arm/include/asm/proc-armv/ptrace.h b/arch/arm/include/asm/proc-armv/ptrace.h
index a060ee6..21aef58 100644
--- a/arch/arm/include/asm/proc-armv/ptrace.h
+++ b/arch/arm/include/asm/proc-armv/ptrace.h
@@ -10,6 +10,25 @@
#ifndef __ASM_PROC_PTRACE_H
#define __ASM_PROC_PTRACE_H
+#ifdef CONFIG_ARM64
+
+#define PCMASK 0
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This struct defines the way the registers are stored
+ * on the stack during an exception.
+ */
+struct pt_regs {
+ unsigned long elr;
+ unsigned long regs[31];
+};
+
+#endif /* __ASSEMBLY__ */
+
+#else /* CONFIG_ARM64 */
+
#define USR26_MODE 0x00
#define FIQ26_MODE 0x01
#define IRQ26_MODE 0x02
@@ -104,4 +123,6 @@
#endif /* __ASSEMBLY__ */
+#endif /* CONFIG_ARM64 */
+
#endif
diff --git a/arch/arm/include/asm/proc-armv/system.h b/arch/arm/include/asm/proc-armv/system.h
index cda8976..693d1f4 100644
--- a/arch/arm/include/asm/proc-armv/system.h
+++ b/arch/arm/include/asm/proc-armv/system.h
@@ -13,6 +13,60 @@
/*
* Save the current interrupt enable state & disable IRQs
*/
+#ifdef CONFIG_ARM64
+
+/*
+ * Save the current interrupt enable state
+ * and disable IRQs/FIQs
+ */
+#define local_irq_save(flags) \
+ ({ \
+ asm volatile( \
+ "mrs %0, daif" \
+ "msr daifset, #3" \
+ : "=r" (flags) \
+ : \
+ : "memory"); \
+ })
+
+/*
+ * restore saved IRQ & FIQ state
+ */
+#define local_irq_restore(flags) \
+ ({ \
+ asm volatile( \
+ "msr daif, %0" \
+ : \
+ : "r" (flags) \
+ : "memory"); \
+ })
+
+/*
+ * Enable IRQs/FIQs
+ */
+#define local_irq_enable() \
+ ({ \
+ asm volatile( \
+ "msr daifclr, #3" \
+ : \
+ : \
+ : "memory"); \
+ })
+
+/*
+ * Disable IRQs/FIQs
+ */
+#define local_irq_disable() \
+ ({ \
+ asm volatile( \
+ "msr daifset, #3" \
+ : \
+ : \
+ : "memory"); \
+ })
+
+#else /* CONFIG_ARM64 */
+
#define local_irq_save(x) \
({ \
unsigned long temp; \
@@ -107,7 +161,10 @@
: "r" (x) \
: "memory")
-#if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110)
+#endif /* CONFIG_ARM64 */
+
+#if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110) || \
+ defined(CONFIG_ARM64)
/*
* On the StrongARM, "swp" is terminally broken since it bypasses the
* cache totally. This means that the cache becomes inconsistent, and,
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 760345f..4178f8c 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -1,6 +1,86 @@
#ifndef __ASM_ARM_SYSTEM_H
#define __ASM_ARM_SYSTEM_H
+#ifdef CONFIG_ARM64
+
+/*
+ * SCTLR_EL1/SCTLR_EL2/SCTLR_EL3 bits definitions
+ */
+#define CR_M (1 << 0) /* MMU enable */
+#define CR_A (1 << 1) /* Alignment abort enable */
+#define CR_C (1 << 2) /* Dcache enable */
+#define CR_SA (1 << 3) /* Stack Alignment Check Enable */
+#define CR_I (1 << 12) /* Icache enable */
+#define CR_WXN (1 << 19) /* Write Permision Imply XN */
+#define CR_EE (1 << 25) /* Exception (Big) Endian */
+
+#define PGTABLE_SIZE (0x10000)
+
+#ifndef __ASSEMBLY__
+
+#define isb() \
+ ({asm volatile( \
+ "isb" : : : "memory"); \
+ })
+
+#define wfi() \
+ ({asm volatile( \
+ "wfi" : : : "memory"); \
+ })
+
+static inline unsigned int current_el(void)
+{
+ unsigned int el;
+ asm volatile("mrs %0, CurrentEL" : "=r" (el) : : "cc");
+ return el >> 2;
+}
+
+static inline unsigned int get_sctlr(void)
+{
+ unsigned int el, val;
+
+ el = current_el();
+ if (el == 1)
+ asm volatile("mrs %0, sctlr_el1" : "=r" (val) : : "cc");
+ else if (el == 2)
+ asm volatile("mrs %0, sctlr_el2" : "=r" (val) : : "cc");
+ else
+ asm volatile("mrs %0, sctlr_el3" : "=r" (val) : : "cc");
+
+ return val;
+}
+
+static inline void set_sctlr(unsigned int val)
+{
+ unsigned int el;
+
+ el = current_el();
+ if (el == 1)
+ asm volatile("msr sctlr_el1, %0" : : "r" (val) : "cc");
+ else if (el == 2)
+ asm volatile("msr sctlr_el2, %0" : : "r" (val) : "cc");
+ else
+ asm volatile("msr sctlr_el3, %0" : : "r" (val) : "cc");
+
+ asm volatile("isb");
+}
+
+void __asm_flush_dcache_all(void);
+void __asm_flush_dcache_range(u64 start, u64 end);
+void __asm_invalidate_tlb_all(void);
+void __asm_invalidate_icache_all(void);
+
+void armv8_switch_to_el2(void);
+void armv8_switch_to_el1(void);
+void gic_init(void);
+void gic_send_sgi(unsigned long sgino);
+void wait_for_wakeup(void);
+void smp_kick_all_cpus(void);
+
+#endif /* __ASSEMBLY__ */
+
+#else /* CONFIG_ARM64 */
+
#ifdef __KERNEL__
#define CPU_ARCH_UNKNOWN 0
@@ -45,6 +125,8 @@
#define CR_AFE (1 << 29) /* Access flag enable */
#define CR_TE (1 << 30) /* Thumb exception enable */
+#define PGTABLE_SIZE (4096 * 4)
+
/*
* This is used to ensure the compiler did actually allocate the register we
* asked it for some inline assembly sequences. Apparently we can't trust
@@ -132,4 +214,6 @@
#endif /* __KERNEL__ */
+#endif /* CONFIG_ARM64 */
+
#endif
diff --git a/arch/arm/include/asm/types.h b/arch/arm/include/asm/types.h
index 71dc049..2326420 100644
--- a/arch/arm/include/asm/types.h
+++ b/arch/arm/include/asm/types.h
@@ -39,7 +39,11 @@
typedef signed long long s64;
typedef unsigned long long u64;
+#ifdef CONFIG_ARM64
+#define BITS_PER_LONG 64
+#else /* CONFIG_ARM64 */
#define BITS_PER_LONG 32
+#endif /* CONFIG_ARM64 */
/* Dma addresses are 32-bits wide. */
diff --git a/arch/arm/include/asm/u-boot.h b/arch/arm/include/asm/u-boot.h
index 2b5fce8..cb81232 100644
--- a/arch/arm/include/asm/u-boot.h
+++ b/arch/arm/include/asm/u-boot.h
@@ -44,6 +44,10 @@
#endif /* !CONFIG_SYS_GENERIC_BOARD */
/* For image.h:image_check_target_arch() */
+#ifndef CONFIG_ARM64
#define IH_ARCH_DEFAULT IH_ARCH_ARM
+#else
+#define IH_ARCH_DEFAULT IH_ARCH_ARM64
+#endif
#endif /* _U_BOOT_H_ */
diff --git a/arch/arm/include/asm/unaligned.h b/arch/arm/include/asm/unaligned.h
index 44593a8..0a228fb 100644
--- a/arch/arm/include/asm/unaligned.h
+++ b/arch/arm/include/asm/unaligned.h
@@ -8,7 +8,7 @@
/*
* Select endianness
*/
-#ifndef __ARMEB__
+#if __BYTE_ORDER == __LITTLE_ENDIAN
#define get_unaligned __get_unaligned_le
#define put_unaligned __put_unaligned_le
#else
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 679f19a..321997c 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -17,14 +17,22 @@
lib-y += div0.o
endif
-obj-y += crt0.o
+ifdef CONFIG_ARM64
+obj-y += crt0_64.o
+else
+obj-y += crt0.o
+endif
ifndef CONFIG_SPL_BUILD
-obj-y += relocate.o
+ifdef CONFIG_ARM64
+obj-y += relocate_64.o
+else
+obj-y += relocate.o
+endif
ifndef CONFIG_SYS_GENERIC_BOARD
obj-y += board.o
endif
-obj-y += sections.o
+obj-y += sections.o
obj-$(CONFIG_OF_LIBFDT) += bootm-fdt.o
obj-$(CONFIG_CMD_BOOTM) += bootm.o
@@ -35,11 +43,17 @@
obj-$(CONFIG_SPL_FRAMEWORK) += spl.o
endif
+ifdef CONFIG_ARM64
+obj-y += interrupts_64.o
+else
obj-y += interrupts.o
+endif
obj-y += reset.o
obj-y += cache.o
+ifndef CONFIG_ARM64
obj-y += cache-cp15.o
+endif
# For EABI conformant tool chains, provide eabi_compat()
ifneq (,$(findstring -mabi=aapcs-linux,$(PLATFORM_CPPFLAGS)))
diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index 9c72a53..b770e25 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -344,7 +344,7 @@
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
/* reserve TLB table */
- gd->arch.tlb_size = 4096 * 4;
+ gd->arch.tlb_size = PGTABLE_SIZE;
addr -= gd->arch.tlb_size;
/* round down to next 64 kB limit */
@@ -419,6 +419,7 @@
}
#endif
+#ifndef CONFIG_ARM64
/* setup stackpointer for exeptions */
gd->irq_sp = addr_sp;
#ifdef CONFIG_USE_IRQ
@@ -431,6 +432,10 @@
/* 8-byte alignment for ABI compliance */
addr_sp &= ~0x07;
+#else /* CONFIG_ARM64 */
+ /* 16-byte alignment for ABI compliance */
+ addr_sp &= ~0x0f;
+#endif /* CONFIG_ARM64 */
#else
addr_sp += 128; /* leave 32 words for abort-stack */
gd->irq_sp = addr_sp;
diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c
index f476a89..a8295bf 100644
--- a/arch/arm/lib/bootm.c
+++ b/arch/arm/lib/bootm.c
@@ -196,6 +196,14 @@
debug("entered non-secure state\n");
#endif
#endif
+
+#ifdef CONFIG_ARM64
+ smp_kick_all_cpus();
+ armv8_switch_to_el2();
+#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
+ armv8_switch_to_el1();
+#endif
+#endif
}
/* Subcommand: PREP */
@@ -240,6 +248,21 @@
/* Subcommand: GO */
static void boot_jump_linux(bootm_headers_t *images, int flag)
{
+#ifdef CONFIG_ARM64
+ void (*kernel_entry)(void *fdt_addr);
+ int fake = (flag & BOOTM_STATE_OS_FAKE_GO);
+
+ kernel_entry = (void (*)(void *fdt_addr))images->ep;
+
+ debug("## Transferring control to Linux (at address %lx)...\n",
+ (ulong) kernel_entry);
+ bootstage_mark(BOOTSTAGE_ID_RUN_OS);
+
+ announce_and_cleanup(fake);
+
+ if (!fake)
+ kernel_entry(images->ft_addr);
+#else
unsigned long machid = gd->bd->bi_arch_number;
char *s;
void (*kernel_entry)(int zero, int arch, uint params);
@@ -266,6 +289,7 @@
if (!fake)
kernel_entry(0, machid, r2);
+#endif
}
/* Main Entry point for arm bootm implementation
@@ -326,3 +350,26 @@
}
#endif /* CONFIG_CMD_BOOTZ */
+
+#if defined(CONFIG_BOOTM_VXWORKS)
+void boot_prep_vxworks(bootm_headers_t *images)
+{
+#if defined(CONFIG_OF_LIBFDT)
+ int off;
+
+ if (images->ft_addr) {
+ off = fdt_path_offset(images->ft_addr, "/memory");
+ if (off < 0) {
+ if (arch_fixup_memory_node(images->ft_addr))
+ puts("## WARNING: fixup memory failed!\n");
+ }
+ }
+#endif
+ cleanup_before_linux();
+}
+void boot_jump_vxworks(bootm_headers_t *images)
+{
+ /* ARM VxWorks requires device tree physical address to be passed */
+ ((void (*)(void *))images->ep)(images->ft_addr);
+}
+#endif
diff --git a/arch/arm/lib/crt0_64.S b/arch/arm/lib/crt0_64.S
new file mode 100644
index 0000000..7756396
--- /dev/null
+++ b/arch/arm/lib/crt0_64.S
@@ -0,0 +1,113 @@
+/*
+ * crt0 - C-runtime startup Code for AArch64 U-Boot
+ *
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * (C) Copyright 2012
+ * Albert ARIBAUD <albert.u.boot@aribaud.net>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
+#include <asm-offsets.h>
+#include <asm/macro.h>
+#include <linux/linkage.h>
+
+/*
+ * This file handles the target-independent stages of the U-Boot
+ * start-up where a C runtime environment is needed. Its entry point
+ * is _main and is branched into from the target's start.S file.
+ *
+ * _main execution sequence is:
+ *
+ * 1. Set up initial environment for calling board_init_f().
+ * This environment only provides a stack and a place to store
+ * the GD ('global data') structure, both located in some readily
+ * available RAM (SRAM, locked cache...). In this context, VARIABLE
+ * global data, initialized or not (BSS), are UNAVAILABLE; only
+ * CONSTANT initialized data are available.
+ *
+ * 2. Call board_init_f(). This function prepares the hardware for
+ * execution from system RAM (DRAM, DDR...) As system RAM may not
+ * be available yet, , board_init_f() must use the current GD to
+ * store any data which must be passed on to later stages. These
+ * data include the relocation destination, the future stack, and
+ * the future GD location.
+ *
+ * (the following applies only to non-SPL builds)
+ *
+ * 3. Set up intermediate environment where the stack and GD are the
+ * ones allocated by board_init_f() in system RAM, but BSS and
+ * initialized non-const data are still not available.
+ *
+ * 4. Call relocate_code(). This function relocates U-Boot from its
+ * current location into the relocation destination computed by
+ * board_init_f().
+ *
+ * 5. Set up final environment for calling board_init_r(). This
+ * environment has BSS (initialized to 0), initialized non-const
+ * data (initialized to their intended value), and stack in system
+ * RAM. GD has retained values set by board_init_f(). Some CPUs
+ * have some work left to do at this point regarding memory, so
+ * call c_runtime_cpu_setup.
+ *
+ * 6. Branch to board_init_r().
+ */
+
+ENTRY(_main)
+
+/*
+ * Set up initial C runtime environment and call board_init_f(0).
+ */
+ ldr x0, =(CONFIG_SYS_INIT_SP_ADDR)
+ sub x0, x0, #GD_SIZE /* allocate one GD above SP */
+ bic sp, x0, #0xf /* 16-byte alignment for ABI compliance */
+ mov x18, sp /* GD is above SP */
+ mov x0, #0
+ bl board_init_f
+
+/*
+ * Set up intermediate environment (new sp and gd) and call
+ * relocate_code(addr_moni). Trick here is that we'll return
+ * 'here' but relocated.
+ */
+ ldr x0, [x18, #GD_START_ADDR_SP] /* x0 <- gd->start_addr_sp */
+ bic sp, x0, #0xf /* 16-byte alignment for ABI compliance */
+ ldr x18, [x18, #GD_BD] /* x18 <- gd->bd */
+ sub x18, x18, #GD_SIZE /* new GD is below bd */
+
+ adr lr, relocation_return
+ ldr x9, [x18, #GD_RELOC_OFF] /* x9 <- gd->reloc_off */
+ add lr, lr, x9 /* new return address after relocation */
+ ldr x0, [x18, #GD_RELOCADDR] /* x0 <- gd->relocaddr */
+ b relocate_code
+
+relocation_return:
+
+/*
+ * Set up final (full) environment
+ */
+ bl c_runtime_cpu_setup /* still call old routine */
+
+/*
+ * Clear BSS section
+ */
+ ldr x0, =__bss_start /* this is auto-relocated! */
+ ldr x1, =__bss_end /* this is auto-relocated! */
+ mov x2, #0
+clear_loop:
+ str x2, [x0]
+ add x0, x0, #8
+ cmp x0, x1
+ b.lo clear_loop
+
+ /* call board_init_r(gd_t *id, ulong dest_addr) */
+ mov x0, x18 /* gd_t */
+ ldr x1, [x18, #GD_RELOCADDR] /* dest_addr */
+ b board_init_r /* PC relative jump */
+
+ /* NOTREACHED - board_init_r() does not return */
+
+ENDPROC(_main)
diff --git a/arch/arm/lib/interrupts_64.c b/arch/arm/lib/interrupts_64.c
new file mode 100644
index 0000000..b476722
--- /dev/null
+++ b/arch/arm/lib/interrupts_64.c
@@ -0,0 +1,120 @@
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/compiler.h>
+
+
+int interrupt_init(void)
+{
+ return 0;
+}
+
+void enable_interrupts(void)
+{
+ return;
+}
+
+int disable_interrupts(void)
+{
+ return 0;
+}
+
+void show_regs(struct pt_regs *regs)
+{
+ int i;
+
+ printf("ELR: %lx\n", regs->elr);
+ printf("LR: %lx\n", regs->regs[30]);
+ for (i = 0; i < 29; i += 2)
+ printf("x%-2d: %016lx x%-2d: %016lx\n",
+ i, regs->regs[i], i+1, regs->regs[i+1]);
+ printf("\n");
+}
+
+/*
+ * do_bad_sync handles the impossible case in the Synchronous Abort vector.
+ */
+void do_bad_sync(struct pt_regs *pt_regs, unsigned int esr)
+{
+ printf("Bad mode in \"Synchronous Abort\" handler, esr 0x%08x\n", esr);
+ show_regs(pt_regs);
+ panic("Resetting CPU ...\n");
+}
+
+/*
+ * do_bad_irq handles the impossible case in the Irq vector.
+ */
+void do_bad_irq(struct pt_regs *pt_regs, unsigned int esr)
+{
+ printf("Bad mode in \"Irq\" handler, esr 0x%08x\n", esr);
+ show_regs(pt_regs);
+ panic("Resetting CPU ...\n");
+}
+
+/*
+ * do_bad_fiq handles the impossible case in the Fiq vector.
+ */
+void do_bad_fiq(struct pt_regs *pt_regs, unsigned int esr)
+{
+ printf("Bad mode in \"Fiq\" handler, esr 0x%08x\n", esr);
+ show_regs(pt_regs);
+ panic("Resetting CPU ...\n");
+}
+
+/*
+ * do_bad_error handles the impossible case in the Error vector.
+ */
+void do_bad_error(struct pt_regs *pt_regs, unsigned int esr)
+{
+ printf("Bad mode in \"Error\" handler, esr 0x%08x\n", esr);
+ show_regs(pt_regs);
+ panic("Resetting CPU ...\n");
+}
+
+/*
+ * do_sync handles the Synchronous Abort exception.
+ */
+void do_sync(struct pt_regs *pt_regs, unsigned int esr)
+{
+ printf("\"Synchronous Abort\" handler, esr 0x%08x\n", esr);
+ show_regs(pt_regs);
+ panic("Resetting CPU ...\n");
+}
+
+/*
+ * do_irq handles the Irq exception.
+ */
+void do_irq(struct pt_regs *pt_regs, unsigned int esr)
+{
+ printf("\"Irq\" handler, esr 0x%08x\n", esr);
+ show_regs(pt_regs);
+ panic("Resetting CPU ...\n");
+}
+
+/*
+ * do_fiq handles the Fiq exception.
+ */
+void do_fiq(struct pt_regs *pt_regs, unsigned int esr)
+{
+ printf("\"Fiq\" handler, esr 0x%08x\n", esr);
+ show_regs(pt_regs);
+ panic("Resetting CPU ...\n");
+}
+
+/*
+ * do_error handles the Error exception.
+ * Errors are more likely to be processor specific,
+ * it is defined with weak attribute and can be redefined
+ * in processor specific code.
+ */
+void __weak do_error(struct pt_regs *pt_regs, unsigned int esr)
+{
+ printf("\"Error\" handler, esr 0x%08x\n", esr);
+ show_regs(pt_regs);
+ panic("Resetting CPU ...\n");
+}
diff --git a/arch/arm/lib/relocate_64.S b/arch/arm/lib/relocate_64.S
new file mode 100644
index 0000000..7fba9e2
--- /dev/null
+++ b/arch/arm/lib/relocate_64.S
@@ -0,0 +1,58 @@
+/*
+ * relocate - common relocation function for AArch64 U-Boot
+ *
+ * (C) Copyright 2013
+ * Albert ARIBAUD <albert.u.boot@aribaud.net>
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <linux/linkage.h>
+
+/*
+ * void relocate_code (addr_moni)
+ *
+ * This function relocates the monitor code.
+ * x0 holds the destination address.
+ */
+ENTRY(relocate_code)
+ /*
+ * Copy u-boot from flash to RAM
+ */
+ ldr x1, =__image_copy_start /* x1 <- SRC &__image_copy_start */
+ subs x9, x0, x1 /* x9 <- relocation offset */
+ b.eq relocate_done /* skip relocation */
+ ldr x2, =__image_copy_end /* x2 <- SRC &__image_copy_end */
+
+copy_loop:
+ ldp x10, x11, [x1], #16 /* copy from source address [x1] */
+ stp x10, x11, [x0], #16 /* copy to target address [x0] */
+ cmp x1, x2 /* until source end address [x2] */
+ b.lo copy_loop
+
+ /*
+ * Fix .rela.dyn relocations
+ */
+ ldr x2, =__rel_dyn_start /* x2 <- SRC &__rel_dyn_start */
+ ldr x3, =__rel_dyn_end /* x3 <- SRC &__rel_dyn_end */
+fixloop:
+ ldp x0, x1, [x2], #16 /* (x0,x1) <- (SRC location, fixup) */
+ ldr x4, [x2], #8 /* x4 <- addend */
+ and x1, x1, #0xffffffff
+ cmp x1, #1027 /* relative fixup? */
+ bne fixnext
+
+ /* relative fix: store addend plus offset at dest location */
+ add x0, x0, x9
+ add x4, x4, x9
+ str x4, [x0]
+fixnext:
+ cmp x2, x3
+ b.lo fixloop
+
+relocate_done:
+ ret
+ENDPROC(relocate_code)
diff --git a/arch/blackfin/config.mk b/arch/blackfin/config.mk
index 35f8716..73fa798 100644
--- a/arch/blackfin/config.mk
+++ b/arch/blackfin/config.mk
@@ -14,9 +14,9 @@
$(shell awk '$$2 == "CONFIG_BFIN_CPU" { print $$3 }' \
$(src)include/configs/$(BOARD).h)
else
-CONFIG_BFIN_CPU := $(strip $(subst ",,$(CONFIG_BFIN_CPU)))
+CONFIG_BFIN_CPU := $(strip $(CONFIG_BFIN_CPU:"%"=%))
endif
-CONFIG_BFIN_BOOT_MODE := $(strip $(subst ",,$(CONFIG_BFIN_BOOT_MODE)))
+CONFIG_BFIN_BOOT_MODE := $(strip $(CONFIG_BFIN_BOOT_MODE:"%"=%))
PLATFORM_RELFLAGS += -ffixed-P3 -fomit-frame-pointer -mno-fdpic
PLATFORM_CPPFLAGS += -DCONFIG_BLACKFIN
diff --git a/arch/blackfin/cpu/initcode.c b/arch/blackfin/cpu/initcode.c
index ffaf101..2e640af 100644
--- a/arch/blackfin/cpu/initcode.c
+++ b/arch/blackfin/cpu/initcode.c
@@ -18,8 +18,6 @@
#include <asm/mach-common/bits/core.h>
#include <asm/serial.h>
-#define BUG() while (1) asm volatile("emuexcpt;");
-
#ifndef __ADSPBF60x__
#include <asm/mach-common/bits/ebiu.h>
#include <asm/mach-common/bits/pll.h>
@@ -147,8 +145,6 @@
__attribute__((always_inline))
static inline void serial_init(void)
{
- uint32_t uart_base = UART_BASE;
-
#if defined(__ADSPBF54x__) || defined(__ADSPBF60x__)
# ifdef BFIN_BOOT_UART_USE_RTS
# define BFIN_UART_USE_RTS 1
@@ -156,6 +152,7 @@
# define BFIN_UART_USE_RTS 0
# endif
if (BFIN_UART_USE_RTS && CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) {
+ uint32_t uart_base = UART_BASE;
size_t i;
/* force RTS rather than relying on auto RTS */
@@ -195,8 +192,8 @@
#if CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS
if (BFIN_DEBUG_EARLY_SERIAL) {
- serial_early_init(uart_base);
- serial_early_set_baud(uart_base, CONFIG_BAUDRATE);
+ serial_early_init(UART_BASE);
+ serial_early_set_baud(UART_BASE, CONFIG_BAUDRATE);
}
#endif
}
@@ -547,7 +544,7 @@
__attribute__((always_inline)) static inline u16
program_clocks(ADI_BOOT_DATA *bs, bool put_into_srfs)
{
- u16 vr_ctl;
+ u16 vr_ctl = 0;
serial_putc('a');
@@ -731,6 +728,8 @@
serial_putc('a');
+ if (BFIN_DEBUG_EARLY_SERIAL ||
+ CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) {
#ifdef __ADSPBF60x__
sdivR = bfin_read_CGU_DIV();
sdivR = ((sdivR >> 8) & 0x1f) * ((sdivR >> 5) & 0x7);
@@ -744,6 +743,8 @@
divisor = vcoB * sdivR;
quotient = early_division(dividend, divisor);
serial_early_put_div(quotient - ANOMALY_05000230);
+ }
+
serial_putc('c');
}
@@ -913,7 +914,8 @@
continue;
serial_putc('z');
- uint32_t *hibernate_magic = bfin_read32(DPM0_RESTORE4);
+ uint32_t *hibernate_magic =
+ (uint32_t *)bfin_read32(DPM0_RESTORE4);
SSYNC(); /* make sure memory controller is done */
if (hibernate_magic[0] == 0xDEADBEEF) {
serial_putc('c');
diff --git a/arch/blackfin/include/asm/blackfin_local.h b/arch/blackfin/include/asm/blackfin_local.h
index 8ea8cde..4d6eeab 100644
--- a/arch/blackfin/include/asm/blackfin_local.h
+++ b/arch/blackfin/include/asm/blackfin_local.h
@@ -81,6 +81,8 @@
# define NOP_PAD_ANOMALY_05000198
#endif
+#define BFIN_BUG() while (1) asm volatile("emuexcpt;");
+
#define _bfin_readX(addr, size, asm_size, asm_ext) ({ \
u32 __v; \
__asm__ __volatile__( \
@@ -111,7 +113,7 @@
sizeof(*(addr)) == 1 ? bfin_read8(addr) : \
sizeof(*(addr)) == 2 ? bfin_read16(addr) : \
sizeof(*(addr)) == 4 ? bfin_read32(addr) : \
- ({ BUG(); 0; }); \
+ ({ BFIN_BUG(); 0; }); \
})
#define bfin_write(addr, val) \
do { \
@@ -119,7 +121,8 @@
case 1: bfin_write8(addr, val); break; \
case 2: bfin_write16(addr, val); break; \
case 4: bfin_write32(addr, val); break; \
- default: BUG(); \
+ default: \
+ BFIN_BUG(); \
} \
} while (0)
diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c
index 17d1f46..392d72d 100644
--- a/arch/blackfin/lib/board.c
+++ b/arch/blackfin/lib/board.c
@@ -19,6 +19,7 @@
#include <net.h>
#include <status_led.h>
#include <version.h>
+#include <watchdog.h>
#include <asm/cplb.h>
#include <asm/mach-common/bits/mpu.h>
diff --git a/arch/blackfin/lib/clocks.c b/arch/blackfin/lib/clocks.c
index 97795e1..7ed56a7 100644
--- a/arch/blackfin/lib/clocks.c
+++ b/arch/blackfin/lib/clocks.c
@@ -36,7 +36,10 @@
u_long get_cclk(void)
{
static u_long cached_cclk_pll_div, cached_cclk;
- u_long div, csel, ssel;
+ u_long div, csel;
+#ifndef CGU_DIV
+ u_long ssel;
+#endif
if (pll_is_bypassed())
return CONFIG_CLKIN_HZ;
diff --git a/arch/powerpc/config.mk b/arch/powerpc/config.mk
index e6bb935..f75c3bf 100644
--- a/arch/powerpc/config.mk
+++ b/arch/powerpc/config.mk
@@ -9,8 +9,9 @@
CONFIG_STANDALONE_LOAD_ADDR ?= 0x40000
LDFLAGS_FINAL += --gc-sections
-PLATFORM_RELFLAGS += -fpic -mrelocatable -ffunction-sections -fdata-sections
-PLATFORM_CPPFLAGS += -DCONFIG_PPC -D__powerpc__
+PLATFORM_RELFLAGS += -fpic -mrelocatable -ffunction-sections -fdata-sections \
+ -meabi
+PLATFORM_CPPFLAGS += -DCONFIG_PPC -D__powerpc__ -ffixed-r2
PLATFORM_LDFLAGS += -n
# Support generic board on PPC
diff --git a/arch/powerpc/cpu/74xx_7xx/config.mk b/arch/powerpc/cpu/74xx_7xx/config.mk
index 9053191..96812a0 100644
--- a/arch/powerpc/cpu/74xx_7xx/config.mk
+++ b/arch/powerpc/cpu/74xx_7xx/config.mk
@@ -5,6 +5,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
-PLATFORM_RELFLAGS += -meabi
-
-PLATFORM_CPPFLAGS += -DCONFIG_74xx_7xx -ffixed-r2 -mstring
+PLATFORM_CPPFLAGS += -DCONFIG_74xx_7xx -mstring
diff --git a/arch/powerpc/cpu/Makefile b/arch/powerpc/cpu/Makefile
index d630abe..88b5298 100644
--- a/arch/powerpc/cpu/Makefile
+++ b/arch/powerpc/cpu/Makefile
@@ -1,3 +1,3 @@
-ifneq ($(filter mpc83xx mpc85xx mpc86xx,$(CPU)),)
-obj-y += mpc8xxx/
-endif
+obj-$(CONFIG_MPC83xx) += mpc8xxx/
+obj-$(CONFIG_MPC85xx) += mpc8xxx/
+obj-$(CONFIG_MPC86xx) += mpc8xxx/
diff --git a/arch/powerpc/cpu/mpc512x/config.mk b/arch/powerpc/cpu/mpc512x/config.mk
index 04717a4..03759e6 100644
--- a/arch/powerpc/cpu/mpc512x/config.mk
+++ b/arch/powerpc/cpu/mpc512x/config.mk
@@ -4,7 +4,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
-PLATFORM_RELFLAGS += -meabi
-
-PLATFORM_CPPFLAGS += -DCONFIG_MPC512X -DCONFIG_E300 \
- -ffixed-r2 -msoft-float -mcpu=603e
+PLATFORM_CPPFLAGS += -DCONFIG_MPC512X -DCONFIG_E300 -msoft-float -mcpu=603e
diff --git a/arch/powerpc/cpu/mpc5xx/config.mk b/arch/powerpc/cpu/mpc5xx/config.mk
index b33f17a..31e2dc9 100644
--- a/arch/powerpc/cpu/mpc5xx/config.mk
+++ b/arch/powerpc/cpu/mpc5xx/config.mk
@@ -5,6 +5,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
-PLATFORM_RELFLAGS += -meabi
-
-PLATFORM_CPPFLAGS += -DCONFIG_5xx -ffixed-r2 -mpowerpc -msoft-float
+PLATFORM_CPPFLAGS += -DCONFIG_5xx -mpowerpc -msoft-float
diff --git a/arch/powerpc/cpu/mpc5xxx/config.mk b/arch/powerpc/cpu/mpc5xxx/config.mk
index 57bdd2d..3384f6f 100644
--- a/arch/powerpc/cpu/mpc5xxx/config.mk
+++ b/arch/powerpc/cpu/mpc5xxx/config.mk
@@ -5,7 +5,5 @@
# SPDX-License-Identifier: GPL-2.0+
#
-PLATFORM_RELFLAGS += -meabi
-
-PLATFORM_CPPFLAGS += -DCONFIG_MPC5xxx -ffixed-r2 \
+PLATFORM_CPPFLAGS += -DCONFIG_MPC5xxx \
-mstring -mcpu=603e -mmultiple
diff --git a/arch/powerpc/cpu/mpc824x/config.mk b/arch/powerpc/cpu/mpc824x/config.mk
index ef605f0..a224bc8 100644
--- a/arch/powerpc/cpu/mpc824x/config.mk
+++ b/arch/powerpc/cpu/mpc824x/config.mk
@@ -5,6 +5,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
-PLATFORM_RELFLAGS += -meabi
-
-PLATFORM_CPPFLAGS += -DCONFIG_MPC824X -ffixed-r2 -mstring -mcpu=603e -msoft-float
+PLATFORM_CPPFLAGS += -DCONFIG_MPC824X -mstring -mcpu=603e -msoft-float
diff --git a/arch/powerpc/cpu/mpc8260/config.mk b/arch/powerpc/cpu/mpc8260/config.mk
index 91b0497..dfac710 100644
--- a/arch/powerpc/cpu/mpc8260/config.mk
+++ b/arch/powerpc/cpu/mpc8260/config.mk
@@ -5,7 +5,5 @@
# SPDX-License-Identifier: GPL-2.0+
#
-PLATFORM_RELFLAGS += -meabi
-
-PLATFORM_CPPFLAGS += -DCONFIG_8260 -DCONFIG_CPM2 -ffixed-r2 \
+PLATFORM_CPPFLAGS += -DCONFIG_8260 -DCONFIG_CPM2 \
-mstring -mcpu=603e -mmultiple
diff --git a/arch/powerpc/cpu/mpc83xx/config.mk b/arch/powerpc/cpu/mpc83xx/config.mk
index c16a003..dfce4d5 100644
--- a/arch/powerpc/cpu/mpc83xx/config.mk
+++ b/arch/powerpc/cpu/mpc83xx/config.mk
@@ -4,7 +4,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
-PLATFORM_RELFLAGS += -meabi
-
-PLATFORM_CPPFLAGS += -DCONFIG_MPC83xx -DCONFIG_E300 \
- -ffixed-r2 -msoft-float
+PLATFORM_CPPFLAGS += -DCONFIG_MPC83xx -DCONFIG_E300 -msoft-float
diff --git a/arch/powerpc/cpu/mpc85xx/config.mk b/arch/powerpc/cpu/mpc85xx/config.mk
index 9eef539..72c964c 100644
--- a/arch/powerpc/cpu/mpc85xx/config.mk
+++ b/arch/powerpc/cpu/mpc85xx/config.mk
@@ -5,13 +5,10 @@
# SPDX-License-Identifier: GPL-2.0+
#
-PLATFORM_RELFLAGS += -meabi
-
-PLATFORM_CPPFLAGS += -ffixed-r2 -Wa,-me500 -msoft-float -mno-string
+PLATFORM_CPPFLAGS += -Wa,-me500 -msoft-float -mno-string
# -mspe=yes is needed to have -mno-spe accepted by a buggy GCC;
# see "[PATCH,rs6000] make -mno-spe work as expected" on
# http://gcc.gnu.org/ml/gcc-patches/2008-04/msg00311.html
-PF_CPPFLAGS_SPE := $(call cc-option,-mspe=yes) \
+PLATFORM_CPPFLAGS += $(call cc-option,-mspe=yes) \
$(call cc-option,-mno-spe)
-PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_SPE)
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index 46ae80c..35867df 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -74,12 +74,33 @@
uint ratio[CONFIG_SYS_FSL_NUM_CC_PLLS];
unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
uint mem_pll_rat;
+#ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
+ uint single_src;
+#endif
sys_info->freq_systembus = sysclk;
+#ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
+ /*
+ * DDR_REFCLK_SEL rcw bit is used to determine if DDR PLLS
+ * are driven by separate DDR Refclock or single source
+ * differential clock.
+ */
+ single_src = (in_be32(&gur->rcwsr[5]) >>
+ FSL_CORENET2_RCWSR5_DDR_REFCLK_SEL_SHIFT) &
+ FSL_CORENET2_RCWSR5_DDR_REFCLK_SEL_MASK;
+ /*
+ * For single source clocking, both ddrclock and syclock
+ * are driven by differential sysclock.
+ */
+ if (single_src == FSL_CORENET2_RCWSR5_DDR_REFCLK_SINGLE_CLK) {
+ printf("Single Source Clock Configuration\n");
+ sys_info->freq_ddrbus = CONFIG_SYS_CLK_FREQ;
+ } else
+#endif
#ifdef CONFIG_DDR_CLK_FREQ
- sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ;
+ sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ;
#else
- sys_info->freq_ddrbus = sysclk;
+ sys_info->freq_ddrbus = sysclk;
#endif
sys_info->freq_systembus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
@@ -229,6 +250,9 @@
case 4:
sys_info->freq_fman[1] = freq_c_pll[CONFIG_SYS_FM2_CLK + 1] / 4;
break;
+ case 5:
+ sys_info->freq_fman[1] = sys_info->freq_systembus;
+ break;
case 6:
sys_info->freq_fman[1] = freq_c_pll[CONFIG_SYS_FM2_CLK] / 2;
break;
diff --git a/arch/powerpc/cpu/mpc86xx/config.mk b/arch/powerpc/cpu/mpc86xx/config.mk
index 5dbf6a8..69a0b96 100644
--- a/arch/powerpc/cpu/mpc86xx/config.mk
+++ b/arch/powerpc/cpu/mpc86xx/config.mk
@@ -5,7 +5,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
-PLATFORM_RELFLAGS += -meabi
-
-PLATFORM_CPPFLAGS += -ffixed-r2 -mstring
-PLATFORM_CPPFLAGS += -maltivec -mabi=altivec -msoft-float
+PLATFORM_CPPFLAGS += -mstring -maltivec -mabi=altivec -msoft-float
diff --git a/arch/powerpc/cpu/mpc8xx/config.mk b/arch/powerpc/cpu/mpc8xx/config.mk
index c04e733..ee2c883 100644
--- a/arch/powerpc/cpu/mpc8xx/config.mk
+++ b/arch/powerpc/cpu/mpc8xx/config.mk
@@ -5,6 +5,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
-PLATFORM_RELFLAGS += -meabi
-
-PLATFORM_CPPFLAGS += -DCONFIG_8xx -ffixed-r2 -mstring -mcpu=860 -msoft-float
+PLATFORM_CPPFLAGS += -DCONFIG_8xx -mstring -mcpu=860 -msoft-float
diff --git a/arch/powerpc/cpu/mpc8xxx/Makefile b/arch/powerpc/cpu/mpc8xxx/Makefile
index f66ee2e..e95539e 100644
--- a/arch/powerpc/cpu/mpc8xxx/Makefile
+++ b/arch/powerpc/cpu/mpc8xxx/Makefile
@@ -19,10 +19,8 @@
obj-$(CONFIG_FSL_LAW) += law.o
else
-
-ifneq ($(CPU),mpc83xx)
-obj-y += cpu.o
-endif
+obj-$(CONFIG_MPC85xx) += cpu.o
+obj-$(CONFIG_MPC86xx) += cpu.o
obj-$(CONFIG_OF_LIBFDT) += fdt.o
obj-$(CONFIG_FSL_LBC) += fsl_lbc.o
diff --git a/arch/powerpc/cpu/ppc4xx/config.mk b/arch/powerpc/cpu/ppc4xx/config.mk
index c2b0f9a..71c2a6c 100644
--- a/arch/powerpc/cpu/ppc4xx/config.mk
+++ b/arch/powerpc/cpu/ppc4xx/config.mk
@@ -5,8 +5,7 @@
# SPDX-License-Identifier: GPL-2.0+
#
-PLATFORM_RELFLAGS += -meabi
-PLATFORM_CPPFLAGS += -DCONFIG_4xx -ffixed-r2 -mstring -msoft-float
+PLATFORM_CPPFLAGS += -DCONFIG_4xx -mstring -msoft-float
cfg=$(shell grep configs $(OBJTREE)/include/config.h | sed 's/.*<\(configs.*\)>/\1/')
is440:=$(shell grep CONFIG_440 $(TOPDIR)/include/$(cfg))
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 99e16bd..54ce2f0 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -711,7 +711,8 @@
#define CONFIG_FM_PLAT_CLK_DIV 1
#define CONFIG_SYS_FM1_CLK CONFIG_FM_PLAT_CLK_DIV
#define CONFIG_SYS_FM_MURAM_SIZE 0x30000
-#define CONFIG_SYS_FSL_TBCLK_DIV 32
+#define CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
+#define CONFIG_SYS_FSL_TBCLK_DIV 16
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4"
#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
@@ -745,7 +746,7 @@
#define CONFIG_SYS_NUM_FM1_DTSEC 6
#define CONFIG_SYS_NUM_FM1_10GEC 2
#endif
-#define CONFIG_SYS_FSL_NUM_USB_CTRLS 2
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_PME_PLAT_CLK_DIV 1
#define CONFIG_SYS_PME_CLK CONFIG_PME_PLAT_CLK_DIV
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 672e8c6..68c3c82 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1774,6 +1774,9 @@
#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S3_PLL2 0x00040000
#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S4_PLL1 0x00020000
#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S4_PLL2 0x00010000
+#define FSL_CORENET2_RCWSR5_DDR_REFCLK_SEL_SHIFT 4
+#define FSL_CORENET2_RCWSR5_DDR_REFCLK_SEL_MASK 0x00000011
+#define FSL_CORENET2_RCWSR5_DDR_REFCLK_SINGLE_CLK 1
#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT 17
diff --git a/arch/powerpc/lib/bootm.c b/arch/powerpc/lib/bootm.c
index e7153b0..41fc8f7 100644
--- a/arch/powerpc/lib/bootm.c
+++ b/arch/powerpc/lib/bootm.c
@@ -32,6 +32,7 @@
extern ulong get_effective_memsize(void);
static ulong get_sp (void);
+extern void ft_fixup_num_cores(void *blob);
static void set_clocks_in_mhz (bd_t *kbd);
#ifndef CONFIG_SYS_LINUX_LOWMEM_MAX_SIZE
@@ -277,3 +278,58 @@
#endif /* CONFIG_MPC5xxx */
}
}
+
+#if defined(CONFIG_BOOTM_VXWORKS)
+void boot_prep_vxworks(bootm_headers_t *images)
+{
+#if defined(CONFIG_OF_LIBFDT)
+ int off;
+ u64 base, size;
+
+ if (!images->ft_addr)
+ return;
+
+ base = (u64)gd->bd->bi_memstart;
+ size = (u64)gd->bd->bi_memsize;
+
+ off = fdt_path_offset(images->ft_addr, "/memory");
+ if (off < 0)
+ fdt_fixup_memory(images->ft_addr, base, size);
+
+#if defined(CONFIG_MP)
+#if defined(CONFIG_MPC85xx)
+ ft_fixup_cpu(images->ft_addr, base + size);
+ ft_fixup_num_cores(images->ft_addr);
+#elif defined(CONFIG_MPC86xx)
+ off = fdt_add_mem_rsv(images->ft_addr,
+ determine_mp_bootpg(NULL), (u64)4096);
+ if (off < 0)
+ printf("## WARNING %s: %s\n", __func__, fdt_strerror(off));
+ ft_fixup_num_cores(images->ft_addr);
+#endif
+ flush_cache((unsigned long)images->ft_addr, images->ft_len);
+#endif
+#endif
+}
+
+void boot_jump_vxworks(bootm_headers_t *images)
+{
+ /* PowerPC VxWorks boot interface conforms to the ePAPR standard
+ * general purpuse registers:
+ *
+ * r3: Effective address of the device tree image
+ * r4: 0
+ * r5: 0
+ * r6: ePAPR magic value
+ * r7: shall be the size of the boot IMA in bytes
+ * r8: 0
+ * r9: 0
+ * TCR: WRC = 0, no watchdog timer reset will occur
+ */
+ WATCHDOG_RESET();
+
+ ((void (*)(void *, ulong, ulong, ulong,
+ ulong, ulong, ulong))images->ep)(images->ft_addr,
+ 0, 0, EPAPR_MAGIC, getenv_bootm_mapsize(), 0, 0);
+}
+#endif
diff --git a/arch/sandbox/cpu/cpu.c b/arch/sandbox/cpu/cpu.c
index cfc1fda..38019e0 100644
--- a/arch/sandbox/cpu/cpu.c
+++ b/arch/sandbox/cpu/cpu.c
@@ -5,13 +5,23 @@
#include <common.h>
#include <os.h>
+#include <asm/state.h>
DECLARE_GLOBAL_DATA_PTR;
-int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+void reset_cpu(ulong ignored)
{
+ if (state_uninit())
+ os_exit(2);
+
/* This is considered normal termination for now */
os_exit(0);
+}
+
+int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ reset_cpu(0);
+
return 0;
}
@@ -28,7 +38,14 @@
int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
{
- return -1;
+ if (flag & (BOOTM_STATE_OS_GO | BOOTM_STATE_OS_FAKE_GO)) {
+ bootstage_mark(BOOTSTAGE_ID_RUN_OS);
+ printf("## Transferring control to Linux (at address %08lx)...\n",
+ images->ep);
+ reset_cpu(0);
+ }
+
+ return 0;
}
int cleanup_before_linux(void)
diff --git a/arch/sandbox/cpu/os.c b/arch/sandbox/cpu/os.c
index 26f44cb..725b505 100644
--- a/arch/sandbox/cpu/os.c
+++ b/arch/sandbox/cpu/os.c
@@ -27,6 +27,10 @@
/* Operating System Interface */
+struct os_mem_hdr {
+ size_t length; /* number of bytes in the block */
+};
+
ssize_t os_read(int fd, void *buf, size_t count)
{
return read(fd, buf, count);
@@ -128,8 +132,45 @@
void *os_malloc(size_t length)
{
- return mmap(NULL, length, PROT_READ | PROT_WRITE,
- MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+ struct os_mem_hdr *hdr;
+
+ hdr = mmap(NULL, length + sizeof(*hdr), PROT_READ | PROT_WRITE,
+ MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+ if (hdr == MAP_FAILED)
+ return NULL;
+ hdr->length = length;
+
+ return hdr + 1;
+}
+
+void *os_free(void *ptr)
+{
+ struct os_mem_hdr *hdr = ptr;
+
+ hdr--;
+ if (ptr)
+ munmap(hdr, hdr->length + sizeof(*hdr));
+}
+
+void *os_realloc(void *ptr, size_t length)
+{
+ struct os_mem_hdr *hdr = ptr;
+ void *buf = NULL;
+
+ hdr--;
+ if (length != 0) {
+ buf = os_malloc(length);
+ if (!buf)
+ return buf;
+ if (ptr) {
+ if (length > hdr->length)
+ length = hdr->length;
+ memcpy(buf, ptr, length);
+ }
+ }
+ os_free(ptr);
+
+ return buf;
}
void os_usleep(unsigned long usec)
@@ -347,3 +388,53 @@
return ret;
return buf.st_size;
}
+
+void os_putc(int ch)
+{
+ putchar(ch);
+}
+
+void os_puts(const char *str)
+{
+ while (*str)
+ os_putc(*str++);
+}
+
+int os_write_ram_buf(const char *fname)
+{
+ struct sandbox_state *state = state_get_current();
+ int fd, ret;
+
+ fd = open(fname, O_CREAT | O_WRONLY, 0777);
+ if (fd < 0)
+ return -ENOENT;
+ ret = write(fd, state->ram_buf, state->ram_size);
+ close(fd);
+ if (ret != state->ram_size)
+ return -EIO;
+
+ return 0;
+}
+
+int os_read_ram_buf(const char *fname)
+{
+ struct sandbox_state *state = state_get_current();
+ int fd, ret;
+ int size;
+
+ size = os_get_filesize(fname);
+ if (size < 0)
+ return -ENOENT;
+ if (size != state->ram_size)
+ return -ENOSPC;
+ fd = open(fname, O_RDONLY);
+ if (fd < 0)
+ return -ENOENT;
+
+ ret = read(fd, state->ram_buf, state->ram_size);
+ close(fd);
+ if (ret != state->ram_size)
+ return -EIO;
+
+ return 0;
+}
diff --git a/arch/sandbox/cpu/start.c b/arch/sandbox/cpu/start.c
index 1b15454..1df21d4 100644
--- a/arch/sandbox/cpu/start.c
+++ b/arch/sandbox/cpu/start.c
@@ -4,11 +4,12 @@
*/
#include <common.h>
+#include <os.h>
#include <asm/getopt.h>
#include <asm/sections.h>
#include <asm/state.h>
-#include <os.h>
+DECLARE_GLOBAL_DATA_PTR;
int sandbox_early_getopt_check(void)
{
@@ -50,9 +51,9 @@
/* then the long flag */
if (opt->has_arg)
- printf("--%-*s", max_noarg_len, opt->flag);
- else
printf("--%-*s <arg> ", max_arg_len, opt->flag);
+ else
+ printf("--%-*s", max_noarg_len, opt->flag);
/* finally the help text */
printf(" %s\n", opt->help);
@@ -75,7 +76,8 @@
/* Execute command if required */
if (state->cmd) {
run_command_list(state->cmd, -1, 0);
- os_exit(state->exit_type);
+ if (!state->interactive)
+ os_exit(state->exit_type);
}
return 0;
@@ -96,25 +98,93 @@
}
SANDBOX_CMDLINE_OPT_SHORT(fdt, 'd', 1, "Specify U-Boot's control FDT");
+static int sandbox_cmdline_cb_interactive(struct sandbox_state *state,
+ const char *arg)
+{
+ state->interactive = true;
+ return 0;
+}
+
+SANDBOX_CMDLINE_OPT_SHORT(interactive, 'i', 0, "Enter interactive mode");
+
+static int sandbox_cmdline_cb_memory(struct sandbox_state *state,
+ const char *arg)
+{
+ int err;
+
+ /* For now assume we always want to write it */
+ state->write_ram_buf = true;
+ state->ram_buf_fname = arg;
+
+ if (os_read_ram_buf(arg)) {
+ printf("Failed to read RAM buffer\n");
+ return err;
+ }
+
+ return 0;
+}
+SANDBOX_CMDLINE_OPT_SHORT(memory, 'm', 1,
+ "Read/write ram_buf memory contents from file");
+
+static int sandbox_cmdline_cb_state(struct sandbox_state *state,
+ const char *arg)
+{
+ state->state_fname = arg;
+ return 0;
+}
+SANDBOX_CMDLINE_OPT_SHORT(state, 's', 1, "Specify the sandbox state FDT");
+
+static int sandbox_cmdline_cb_read(struct sandbox_state *state,
+ const char *arg)
+{
+ state->read_state = true;
+ return 0;
+}
+SANDBOX_CMDLINE_OPT_SHORT(read, 'r', 0, "Read the state FDT on startup");
+
+static int sandbox_cmdline_cb_write(struct sandbox_state *state,
+ const char *arg)
+{
+ state->write_state = true;
+ return 0;
+}
+SANDBOX_CMDLINE_OPT_SHORT(write, 'w', 0, "Write state FDT on exit");
+
+static int sandbox_cmdline_cb_ignore_missing(struct sandbox_state *state,
+ const char *arg)
+{
+ state->ignore_missing_state_on_read = true;
+ return 0;
+}
+SANDBOX_CMDLINE_OPT_SHORT(ignore_missing, 'n', 0,
+ "Ignore missing state on read");
+
int main(int argc, char *argv[])
{
struct sandbox_state *state;
- int err;
+ int ret;
- err = state_init();
- if (err)
- return err;
+ ret = state_init();
+ if (ret)
+ goto err;
state = state_get_current();
if (os_parse_args(state, argc, argv))
return 1;
- /*
- * Do pre- and post-relocation init, then start up U-Boot. This will
- * never return.
- */
+ ret = sandbox_read_state(state, state->state_fname);
+ if (ret)
+ goto err;
+
+ /* Do pre- and post-relocation init */
board_init_f(0);
- /* NOTREACHED - board_init_f() does not return */
+ board_init_r(gd->new_gd, 0);
+
+ /* NOTREACHED - board_init_r() does not return */
return 0;
+
+err:
+ printf("Error %d\n", ret);
+ return 1;
}
diff --git a/arch/sandbox/cpu/state.c b/arch/sandbox/cpu/state.c
index 56d5041..a145808 100644
--- a/arch/sandbox/cpu/state.c
+++ b/arch/sandbox/cpu/state.c
@@ -4,6 +4,9 @@
*/
#include <common.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <os.h>
#include <asm/state.h>
/* Main state record for the sandbox */
@@ -15,6 +18,324 @@
state->exit_type = exit_type;
}
+static int state_ensure_space(int extra_size)
+{
+ void *blob = state->state_fdt;
+ int used, size, free;
+ void *buf;
+ int ret;
+
+ used = fdt_off_dt_strings(blob) + fdt_size_dt_strings(blob);
+ size = fdt_totalsize(blob);
+ free = size - used;
+ if (free > extra_size)
+ return 0;
+
+ size = used + extra_size;
+ buf = os_malloc(size);
+ if (!buf)
+ return -ENOMEM;
+
+ ret = fdt_open_into(blob, buf, size);
+ if (ret) {
+ os_free(buf);
+ return -EIO;
+ }
+
+ os_free(blob);
+ state->state_fdt = buf;
+ return 0;
+}
+
+static int state_read_file(struct sandbox_state *state, const char *fname)
+{
+ int size;
+ int ret;
+ int fd;
+
+ size = os_get_filesize(fname);
+ if (size < 0) {
+ printf("Cannot find sandbox state file '%s'\n", fname);
+ return -ENOENT;
+ }
+ state->state_fdt = os_malloc(size);
+ if (!state->state_fdt) {
+ puts("No memory to read sandbox state\n");
+ return -ENOMEM;
+ }
+ fd = os_open(fname, OS_O_RDONLY);
+ if (fd < 0) {
+ printf("Cannot open sandbox state file '%s'\n", fname);
+ ret = -EPERM;
+ goto err_open;
+ }
+ if (os_read(fd, state->state_fdt, size) != size) {
+ printf("Cannot read sandbox state file '%s'\n", fname);
+ ret = -EIO;
+ goto err_read;
+ }
+ os_close(fd);
+
+ return 0;
+err_read:
+ os_close(fd);
+err_open:
+ os_free(state->state_fdt);
+ state->state_fdt = NULL;
+
+ return ret;
+}
+
+/***
+ * sandbox_read_state_nodes() - Read state associated with a driver
+ *
+ * This looks through all compatible nodes and calls the read function on
+ * each one, to read in the state.
+ *
+ * If nothing is found, it still calls the read function once, to set up a
+ * single global state for that driver.
+ *
+ * @state: Sandbox state
+ * @io: Method to use for reading state
+ * @blob: FDT containing state
+ * @return 0 if OK, -EINVAL if the read function returned failure
+ */
+int sandbox_read_state_nodes(struct sandbox_state *state,
+ struct sandbox_state_io *io, const void *blob)
+{
+ int count;
+ int node;
+ int ret;
+
+ debug(" - read %s\n", io->name);
+ if (!io->read)
+ return 0;
+
+ node = -1;
+ count = 0;
+ while (blob) {
+ node = fdt_node_offset_by_compatible(blob, node, io->compat);
+ if (node < 0)
+ return 0; /* No more */
+ debug(" - read node '%s'\n", fdt_get_name(blob, node, NULL));
+ ret = io->read(blob, node);
+ if (ret) {
+ printf("Unable to read state for '%s'\n", io->compat);
+ return -EINVAL;
+ }
+ count++;
+ }
+
+ /*
+ * If we got no saved state, call the read function once without a
+ * node, to set up the global state.
+ */
+ if (count == 0) {
+ debug(" - read global\n");
+ ret = io->read(NULL, -1);
+ if (ret) {
+ printf("Unable to read global state for '%s'\n",
+ io->name);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+int sandbox_read_state(struct sandbox_state *state, const char *fname)
+{
+ struct sandbox_state_io *io;
+ const void *blob;
+ bool got_err;
+ int ret;
+
+ if (state->read_state && fname) {
+ ret = state_read_file(state, fname);
+ if (ret == -ENOENT && state->ignore_missing_state_on_read)
+ ret = 0;
+ if (ret)
+ return ret;
+ }
+
+ /* Call all the state read funtcions */
+ got_err = false;
+ blob = state->state_fdt;
+ io = ll_entry_start(struct sandbox_state_io, state_io);
+ for (; io < ll_entry_end(struct sandbox_state_io, state_io); io++) {
+ ret = sandbox_read_state_nodes(state, io, blob);
+ if (ret < 0)
+ got_err = true;
+ }
+
+ if (state->read_state && fname) {
+ debug("Read sandbox state from '%s'%s\n", fname,
+ got_err ? " (with errors)" : "");
+ }
+
+ return got_err ? -1 : 0;
+}
+
+/***
+ * sandbox_write_state_node() - Write state associated with a driver
+ *
+ * This calls the write function to write out global state for that driver.
+ *
+ * TODO(sjg@chromium.org): Support writing out state from multiple drivers
+ * of the same time. We don't need this yet,and it will be much easier to
+ * do when driver model is available.
+ *
+ * @state: Sandbox state
+ * @io: Method to use for writing state
+ * @return 0 if OK, -EIO if there is a fatal error (such as out of space
+ * for adding the data), -EINVAL if the write function failed.
+ */
+int sandbox_write_state_node(struct sandbox_state *state,
+ struct sandbox_state_io *io)
+{
+ void *blob;
+ int node;
+ int ret;
+
+ if (!io->write)
+ return 0;
+
+ ret = state_ensure_space(SANDBOX_STATE_MIN_SPACE);
+ if (ret) {
+ printf("Failed to add more space for state\n");
+ return -EIO;
+ }
+
+ /* The blob location can change when the size increases */
+ blob = state->state_fdt;
+ node = fdt_node_offset_by_compatible(blob, -1, io->compat);
+ if (node == -FDT_ERR_NOTFOUND) {
+ node = fdt_add_subnode(blob, 0, io->name);
+ if (node < 0) {
+ printf("Cannot create node '%s': %s\n", io->name,
+ fdt_strerror(node));
+ return -EIO;
+ }
+
+ if (fdt_setprop_string(blob, node, "compatible", io->compat)) {
+ puts("Cannot set compatible\n");
+ return -EIO;
+ }
+ } else if (node < 0) {
+ printf("Cannot access node '%s': %s\n", io->name,
+ fdt_strerror(node));
+ return -EIO;
+ }
+ debug("Write state for '%s' to node %d\n", io->compat, node);
+ ret = io->write(blob, node);
+ if (ret) {
+ printf("Unable to write state for '%s'\n", io->compat);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+int sandbox_write_state(struct sandbox_state *state, const char *fname)
+{
+ struct sandbox_state_io *io;
+ bool got_err;
+ int size;
+ int ret;
+ int fd;
+
+ /* Create a state FDT if we don't have one */
+ if (!state->state_fdt) {
+ size = 0x4000;
+ state->state_fdt = os_malloc(size);
+ if (!state->state_fdt) {
+ puts("No memory to create FDT\n");
+ return -ENOMEM;
+ }
+ ret = fdt_create_empty_tree(state->state_fdt, size);
+ if (ret < 0) {
+ printf("Cannot create empty state FDT: %s\n",
+ fdt_strerror(ret));
+ ret = -EIO;
+ goto err_create;
+ }
+ }
+
+ /* Call all the state write funtcions */
+ got_err = false;
+ io = ll_entry_start(struct sandbox_state_io, state_io);
+ ret = 0;
+ for (; io < ll_entry_end(struct sandbox_state_io, state_io); io++) {
+ ret = sandbox_write_state_node(state, io);
+ if (ret == -EIO)
+ break;
+ else if (ret)
+ got_err = true;
+ }
+
+ if (ret == -EIO) {
+ printf("Could not write sandbox state\n");
+ goto err_create;
+ }
+
+ ret = fdt_pack(state->state_fdt);
+ if (ret < 0) {
+ printf("Cannot pack state FDT: %s\n", fdt_strerror(ret));
+ ret = -EINVAL;
+ goto err_create;
+ }
+ size = fdt_totalsize(state->state_fdt);
+ fd = os_open(fname, OS_O_WRONLY | OS_O_CREAT);
+ if (fd < 0) {
+ printf("Cannot open sandbox state file '%s'\n", fname);
+ ret = -EIO;
+ goto err_create;
+ }
+ if (os_write(fd, state->state_fdt, size) != size) {
+ printf("Cannot write sandbox state file '%s'\n", fname);
+ ret = -EIO;
+ goto err_write;
+ }
+ os_close(fd);
+
+ debug("Wrote sandbox state to '%s'%s\n", fname,
+ got_err ? " (with errors)" : "");
+
+ return 0;
+err_write:
+ os_close(fd);
+err_create:
+ os_free(state->state_fdt);
+
+ return ret;
+}
+
+int state_setprop(int node, const char *prop_name, const void *data, int size)
+{
+ void *blob;
+ int len;
+ int ret;
+
+ fdt_getprop(state->state_fdt, node, prop_name, &len);
+
+ /* Add space for the new property, its name and some overhead */
+ ret = state_ensure_space(size - len + strlen(prop_name) + 32);
+ if (ret)
+ return ret;
+
+ /* This should succeed, barring a mutiny */
+ blob = state->state_fdt;
+ ret = fdt_setprop(blob, node, prop_name, data, size);
+ if (ret) {
+ printf("%s: Unable to set property '%s' in node '%s': %s\n",
+ __func__, prop_name, fdt_get_name(blob, node, NULL),
+ fdt_strerror(ret));
+ return -ENOSPC;
+ }
+
+ return 0;
+}
+
struct sandbox_state *state_get_current(void)
{
assert(state);
@@ -25,6 +346,10 @@
{
state = &main_state;
+ state->ram_size = CONFIG_SYS_SDRAM_SIZE;
+ state->ram_buf = os_malloc(state->ram_size);
+ assert(state->ram_buf);
+
/*
* Example of how to use GPIOs:
*
@@ -33,3 +358,31 @@
*/
return 0;
}
+
+int state_uninit(void)
+{
+ int err;
+
+ state = &main_state;
+
+ if (state->write_ram_buf) {
+ err = os_write_ram_buf(state->ram_buf_fname);
+ if (err) {
+ printf("Failed to write RAM buffer\n");
+ return err;
+ }
+ }
+
+ if (state->write_state) {
+ if (sandbox_write_state(state, state->state_fname)) {
+ printf("Failed to write sandbox state\n");
+ return -1;
+ }
+ }
+
+ if (state->state_fdt)
+ os_free(state->state_fdt);
+ memset(state, '\0', sizeof(*state));
+
+ return 0;
+}
diff --git a/arch/sandbox/include/asm/global_data.h b/arch/sandbox/include/asm/global_data.h
index d70532a..b2e9b48 100644
--- a/arch/sandbox/include/asm/global_data.h
+++ b/arch/sandbox/include/asm/global_data.h
@@ -12,7 +12,7 @@
/* Architecture-specific global data */
struct arch_global_data {
- u8 *ram_buf; /* emulated RAM buffer */
+ uint8_t *ram_buf; /* emulated RAM buffer */
};
#include <asm-generic/global_data.h>
diff --git a/arch/sandbox/include/asm/state.h b/arch/sandbox/include/asm/state.h
index a38820b..e8e4fea 100644
--- a/arch/sandbox/include/asm/state.h
+++ b/arch/sandbox/include/asm/state.h
@@ -7,6 +7,8 @@
#define __SANDBOX_STATE_H
#include <config.h>
+#include <stdbool.h>
+#include <linux/stringify.h>
/* How we exited U-Boot */
enum exit_type_id {
@@ -23,17 +25,92 @@
/* The complete state of the test system */
struct sandbox_state {
const char *cmd; /* Command to execute */
+ bool interactive; /* Enable cmdline after execute */
const char *fdt_fname; /* Filename of FDT binary */
enum exit_type_id exit_type; /* How we exited U-Boot */
const char *parse_err; /* Error to report from parsing */
int argc; /* Program arguments */
char **argv;
+ uint8_t *ram_buf; /* Emulated RAM buffer */
+ unsigned int ram_size; /* Size of RAM buffer */
+ const char *ram_buf_fname; /* Filename to use for RAM buffer */
+ bool write_ram_buf; /* Write RAM buffer on exit */
+ const char *state_fname; /* File containing sandbox state */
+ void *state_fdt; /* Holds saved state for sandbox */
+ bool read_state; /* Read sandbox state on startup */
+ bool write_state; /* Write sandbox state on exit */
+ bool ignore_missing_state_on_read; /* No error if state missing */
/* Pointer to information for each SPI bus/cs */
struct sandbox_spi_info spi[CONFIG_SANDBOX_SPI_MAX_BUS]
[CONFIG_SANDBOX_SPI_MAX_CS];
};
+/* Minimum space we guarantee in the state FDT when calling read/write*/
+#define SANDBOX_STATE_MIN_SPACE 0x1000
+
+/**
+ * struct sandbox_state_io - methods to saved/restore sandbox state
+ * @name: Name of of the device tree node, also the name of the variable
+ * holding this data so it should be an identifier (use underscore
+ * instead of minus)
+ * @compat: Compatible string for the node containing this state
+ *
+ * @read: Function to read state from FDT
+ * If data is available, then blob and node will provide access to it. If
+ * not (blob == NULL and node == -1) this function should set up an empty
+ * data set for start-of-day.
+ * @param blob: Pointer to device tree blob, or NULL if no data to read
+ * @param node: Node offset to read from
+ * @return 0 if OK, -ve on error
+ *
+ * @write: Function to write state to FDT
+ * The caller will ensure that there is a node ready for the state. The
+ * node may already contain the old state, in which case it should be
+ * overridden. There is guaranteed to be SANDBOX_STATE_MIN_SPACE bytes
+ * of free space, so error checking is not required for fdt_setprop...()
+ * calls which add up to less than this much space.
+ *
+ * For adding larger properties, use state_setprop().
+ *
+ * @param blob: Device tree blob holding state
+ * @param node: Node to write our state into
+ *
+ * Note that it is possible to save data as large blobs or as individual
+ * hierarchical properties. However, unless you intend to keep state files
+ * around for a long time and be able to run an old state file on a new
+ * sandbox, it might not be worth using individual properties for everything.
+ * This is certainly supported, it is just a matter of the effort you wish
+ * to put into the state read/write feature.
+ */
+struct sandbox_state_io {
+ const char *name;
+ const char *compat;
+ int (*write)(void *blob, int node);
+ int (*read)(const void *blob, int node);
+};
+
+/**
+ * SANDBOX_STATE_IO - Declare sandbox state to read/write
+ *
+ * Sandbox permits saving state from one run and restoring it in another. This
+ * allows the test system to retain state between runs and thus better
+ * emulate a real system. Examples of state that might be useful to save are
+ * the emulated GPIOs pin settings, flash memory contents and TPM private
+ * data. U-Boot memory contents is dealth with separately since it is large
+ * and it is not normally useful to save it (since a normal system does not
+ * preserve DRAM between runs). See the '-m' option for this.
+ *
+ * See struct sandbox_state_io above for member documentation.
+ */
+#define SANDBOX_STATE_IO(_name, _compat, _read, _write) \
+ ll_entry_declare(struct sandbox_state_io, _name, state_io) = { \
+ .name = __stringify(_name), \
+ .read = _read, \
+ .write = _write, \
+ .compat = _compat, \
+ }
+
/**
* Record the exit type to be reported by the test program.
*
@@ -49,8 +126,59 @@
struct sandbox_state *state_get_current(void);
/**
+ * Read the sandbox state from the supplied device tree file
+ *
+ * This calls all registered state handlers to read in the sandbox state
+ * from a previous test run.
+ *
+ * @param state Sandbox state to update
+ * @param fname Filename of device tree file to read from
+ * @return 0 if OK, -ve on error
+ */
+int sandbox_read_state(struct sandbox_state *state, const char *fname);
+
+/**
+ * Write the sandbox state to the supplied device tree file
+ *
+ * This calls all registered state handlers to write out the sandbox state
+ * so that it can be preserved for a future test run.
+ *
+ * If the file exists it is overwritten.
+ *
+ * @param state Sandbox state to update
+ * @param fname Filename of device tree file to write to
+ * @return 0 if OK, -ve on error
+ */
+int sandbox_write_state(struct sandbox_state *state, const char *fname);
+
+/**
+ * Add a property to a sandbox state node
+ *
+ * This is equivalent to fdt_setprop except that it automatically enlarges
+ * the device tree if necessary. That means it is safe to write any amount
+ * of data here.
+ *
+ * This function can only be called from within struct sandbox_state_io's
+ * ->write method, i.e. within state I/O drivers.
+ *
+ * @param node Device tree node to write to
+ * @param prop_name Property to write
+ * @param data Data to write into property
+ * @param size Size of data to write into property
+ */
+int state_setprop(int node, const char *prop_name, const void *data, int size);
+
+/**
* Initialize the test system state
*/
int state_init(void);
+/**
+ * Uninitialize the test system state, writing out state if configured to
+ * do so.
+ *
+ * @return 0 if OK, -ve on error
+ */
+int state_uninit(void);
+
#endif
diff --git a/arch/sandbox/include/asm/u-boot-sandbox.h b/arch/sandbox/include/asm/u-boot-sandbox.h
index bed720c..5707c27 100644
--- a/arch/sandbox/include/asm/u-boot-sandbox.h
+++ b/arch/sandbox/include/asm/u-boot-sandbox.h
@@ -23,4 +23,6 @@
int sandbox_early_getopt_check(void);
int sandbox_main_loop_init(void);
+int cleanup_before_linux(void);
+
#endif /* _U_BOOT_SANDBOX_H_ */
diff --git a/arch/sh/cpu/sh2/config.mk b/arch/sh/cpu/sh2/config.mk
index 8a0de96..69273b4 100644
--- a/arch/sh/cpu/sh2/config.mk
+++ b/arch/sh/cpu/sh2/config.mk
@@ -12,7 +12,7 @@
else # SH2
PLATFORM_CPPFLAGS += -m3e -mb
endif
-PLATFORM_CPPFLAGS += $(call cc-option,-mno-fdpic)
+PLATFORM_CPPFLAGS += -DCONFIG_SH2 $(call cc-option,-mno-fdpic)
PLATFORM_RELFLAGS += -ffixed-r13
PLATFORM_LDFLAGS += $(ENDIANNESS)
diff --git a/arch/sh/cpu/sh2/cpu.c b/arch/sh/cpu/sh2/cpu.c
index 18479a4..a2f856f 100644
--- a/arch/sh/cpu/sh2/cpu.c
+++ b/arch/sh/cpu/sh2/cpu.c
@@ -23,11 +23,7 @@
int checkcpu(void)
{
-#if defined(CONFIG_SH2A)
- puts("CPU: SH2A\n");
-#else
puts("CPU: SH2\n");
-#endif
return 0;
}
diff --git a/arch/sh/cpu/sh3/config.mk b/arch/sh/cpu/sh3/config.mk
index 5c77e5c..abd4b8d 100644
--- a/arch/sh/cpu/sh3/config.mk
+++ b/arch/sh/cpu/sh3/config.mk
@@ -11,5 +11,5 @@
# SPDX-License-Identifier: GPL-2.0+
#
#
-PLATFORM_CPPFLAGS += -m3
+PLATFORM_CPPFLAGS += -DCONFIG_SH3 -m3
PLATFORM_RELFLAGS += -ffixed-r13
diff --git a/arch/sh/cpu/sh4/config.mk b/arch/sh/cpu/sh4/config.mk
index c357557..753580b 100644
--- a/arch/sh/cpu/sh4/config.mk
+++ b/arch/sh/cpu/sh4/config.mk
@@ -8,5 +8,5 @@
# SPDX-License-Identifier: GPL-2.0+
#
#
-PLATFORM_CPPFLAGS += -m4-nofpu
+PLATFORM_CPPFLAGS += -DCONFIG_SH4 -m4-nofpu
PLATFORM_RELFLAGS += -ffixed-r13
diff --git a/arch/sh/cpu/sh4/cpu.c b/arch/sh/cpu/sh4/cpu.c
index 91133a3..e8ee0a4 100644
--- a/arch/sh/cpu/sh4/cpu.c
+++ b/arch/sh/cpu/sh4/cpu.c
@@ -13,11 +13,7 @@
int checkcpu(void)
{
-#ifdef CONFIG_SH4A
- puts("CPU: SH-4A\n");
-#else
puts("CPU: SH4\n");
-#endif
return 0;
}
diff --git a/arch/sh/include/asm/cache.h b/arch/sh/include/asm/cache.h
index b21dc44..0698a37 100644
--- a/arch/sh/include/asm/cache.h
+++ b/arch/sh/include/asm/cache.h
@@ -1,7 +1,7 @@
#ifndef __ASM_SH_CACHE_H
#define __ASM_SH_CACHE_H
-#if defined(CONFIG_SH4) || defined(CONFIG_SH4A)
+#if defined(CONFIG_SH4)
int cache_control(unsigned int cmd);
@@ -18,7 +18,7 @@
*/
#define ARCH_DMA_MINALIGN 32
-#endif /* CONFIG_SH4 || CONFIG_SH4A */
+#endif /* CONFIG_SH4 */
/*
* Use the L1 data cache line size value for the minimum DMA buffer alignment
diff --git a/arch/sh/include/asm/cpu_sh4.h b/arch/sh/include/asm/cpu_sh4.h
index 9181d59..9f48e4f 100644
--- a/arch/sh/include/asm/cpu_sh4.h
+++ b/arch/sh/include/asm/cpu_sh4.h
@@ -37,6 +37,8 @@
# include <asm/cpu_sh7734.h>
#elif defined (CONFIG_CPU_SH7752)
# include <asm/cpu_sh7752.h>
+#elif defined (CONFIG_CPU_SH7753)
+# include <asm/cpu_sh7753.h>
#elif defined (CONFIG_CPU_SH7757)
# include <asm/cpu_sh7757.h>
#elif defined (CONFIG_CPU_SH7763)
diff --git a/arch/sh/include/asm/cpu_sh7753.h b/arch/sh/include/asm/cpu_sh7753.h
new file mode 100644
index 0000000..cd0e0bb
--- /dev/null
+++ b/arch/sh/include/asm/cpu_sh7753.h
@@ -0,0 +1,197 @@
+/*
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ASM_CPU_SH7753_H_
+#define _ASM_CPU_SH7753_H_
+
+#define CCR 0xFF00001C
+#define WTCNT 0xFFCC0000
+#define CCR_CACHE_INIT 0x0000090b
+#define CACHE_OC_NUM_WAYS 1
+
+#ifndef __ASSEMBLY__ /* put C only stuff in this section */
+/* MMU */
+struct mmu_regs {
+ unsigned int reserved[4];
+ unsigned int mmucr;
+};
+#define MMU_BASE ((struct mmu_regs *)0xff000000)
+
+/* Watchdog */
+#define WTCSR0 0xffcc0002
+#define WRSTCSR_R 0xffcc0003
+#define WRSTCSR_W 0xffcc0002
+#define WTCSR_PREFIX 0xa500
+#define WRSTCSR_PREFIX 0x6900
+#define WRSTCSR_WOVF_PREFIX 0x9600
+
+/* SCIF */
+#define SCIF0_BASE 0xfe4b0000 /* The real name is SCIF2 */
+#define SCIF1_BASE 0xfe4c0000 /* The real name is SCIF3 */
+#define SCIF2_BASE 0xfe4d0000 /* The real name is SCIF4 */
+
+/* TMU0 */
+#define TMU_BASE 0xFE430000
+
+/* ETHER, GETHER MAC address */
+struct ether_mac_regs {
+ unsigned int reserved[114];
+ unsigned int mahr;
+ unsigned int reserved2;
+ unsigned int malr;
+};
+#define GETHER0_MAC_BASE ((struct ether_mac_regs *)0xfee0400)
+#define GETHER1_MAC_BASE ((struct ether_mac_regs *)0xfee0c00)
+#define ETHER0_MAC_BASE ((struct ether_mac_regs *)0xfef0000)
+#define ETHER1_MAC_BASE ((struct ether_mac_regs *)0xfef0800)
+
+/* GETHER */
+struct gether_control_regs {
+ unsigned int gbecont;
+};
+#define GETHER_CONTROL_BASE ((struct gether_control_regs *)0xffc10100)
+#define GBECONT_RMII1 0x00020000
+#define GBECONT_RMII0 0x00010000
+
+/* SerMux */
+struct sermux_regs {
+ unsigned char smr0;
+ unsigned char smr1;
+ unsigned char smr2;
+ unsigned char smr3;
+ unsigned char smr4;
+ unsigned char smr5;
+};
+#define SERMUX_BASE ((struct sermux_regs *)0xfe470000)
+
+
+/* USB0/1 */
+struct usb_common_regs {
+ unsigned short reserved[129];
+ unsigned short suspmode;
+};
+#define USB0_COMMON_BASE ((struct usb_common_regs *)0xfe450000)
+#define USB1_COMMON_BASE ((struct usb_common_regs *)0xfe4f0000)
+
+struct usb0_phy_regs {
+ unsigned short reset;
+ unsigned short reserved[4];
+ unsigned short portsel;
+};
+#define USB0_PHY_BASE ((struct usb0_phy_regs *)0xfe5f0000)
+
+struct usb1_port_regs {
+ unsigned int port1sel;
+ unsigned int reserved;
+ unsigned int usb1intsts;
+};
+#define USB1_PORT_BASE ((struct usb1_port_regs *)0xfe4f2000)
+
+struct usb1_alignment_regs {
+ unsigned int ehcidatac; /* 0xfe4fe018 */
+ unsigned int reserved[63];
+ unsigned int ohcidatac;
+};
+#define USB1_ALIGNMENT_BASE ((struct usb1_alignment_regs *)0xfe4fe018)
+
+/* GPIO */
+struct gpio_regs {
+ unsigned short pacr;
+ unsigned short pbcr;
+ unsigned short pccr;
+ unsigned short pdcr;
+ unsigned short pecr;
+ unsigned short pfcr;
+ unsigned short pgcr;
+ unsigned short phcr;
+ unsigned short picr;
+ unsigned short pjcr;
+ unsigned short pkcr;
+ unsigned short plcr;
+ unsigned short pmcr;
+ unsigned short pncr;
+ unsigned short pocr;
+ unsigned short reserved;
+ unsigned short pqcr;
+ unsigned short prcr;
+ unsigned short pscr;
+ unsigned short ptcr;
+ unsigned short pucr;
+ unsigned short pvcr;
+ unsigned short pwcr;
+ unsigned short pxcr;
+ unsigned short pycr;
+ unsigned short pzcr;
+ unsigned char padr;
+ unsigned char reserved_a;
+ unsigned char pbdr;
+ unsigned char reserved_b;
+ unsigned char pcdr;
+ unsigned char reserved_c;
+ unsigned char pddr;
+ unsigned char reserved_d;
+ unsigned char pedr;
+ unsigned char reserved_e;
+ unsigned char pfdr;
+ unsigned char reserved_f;
+ unsigned char pgdr;
+ unsigned char reserved_g;
+ unsigned char phdr;
+ unsigned char reserved_h;
+ unsigned char pidr;
+ unsigned char reserved_i;
+ unsigned char pjdr;
+ unsigned char reserved_j;
+ unsigned char pkdr;
+ unsigned char reserved_k;
+ unsigned char pldr;
+ unsigned char reserved_l;
+ unsigned char pmdr;
+ unsigned char reserved_m;
+ unsigned char pndr;
+ unsigned char reserved_n;
+ unsigned char podr;
+ unsigned char reserved_o;
+ unsigned char ppdr;
+ unsigned char reserved_p;
+ unsigned char pqdr;
+ unsigned char reserved_q;
+ unsigned char prdr;
+ unsigned char reserved_r;
+ unsigned char psdr;
+ unsigned char reserved_s;
+ unsigned char ptdr;
+ unsigned char reserved_t;
+ unsigned char pudr;
+ unsigned char reserved_u;
+ unsigned char pvdr;
+ unsigned char reserved_v;
+ unsigned char pwdr;
+ unsigned char reserved_w;
+ unsigned char pxdr;
+ unsigned char reserved_x;
+ unsigned char pydr;
+ unsigned char reserved_y;
+ unsigned char pzdr;
+ unsigned char reserved_z;
+ unsigned short ncer;
+ unsigned short ncmcr;
+ unsigned short nccsr;
+ unsigned char reserved2[2];
+ unsigned short psel0; /* +0x70 */
+ unsigned short psel1;
+ unsigned short psel2;
+ unsigned short psel3;
+ unsigned short psel4;
+ unsigned short psel5;
+ unsigned short psel6;
+ unsigned short reserved3[2];
+ unsigned short psel7;
+};
+#define GPIO_BASE ((struct gpio_regs *)0xffec0000)
+
+#endif /* ifndef __ASSEMBLY__ */
+#endif /* _ASM_CPU_SH7753_H_ */
diff --git a/arch/sh/include/asm/processor.h b/arch/sh/include/asm/processor.h
index 938a89c..b8677da 100644
--- a/arch/sh/include/asm/processor.h
+++ b/arch/sh/include/asm/processor.h
@@ -1,12 +1,10 @@
#ifndef _ASM_SH_PROCESSOR_H_
#define _ASM_SH_PROCESSOR_H_
-#if defined(CONFIG_SH2) || \
- defined (CONFIG_SH2A)
+#if defined(CONFIG_SH2)
# include <asm/cpu_sh2.h>
-#elif defined (CONFIG_SH3)
+#elif defined(CONFIG_SH3)
# include <asm/cpu_sh3.h>
-#elif defined (CONFIG_SH4) || \
- defined (CONFIG_SH4A)
+#elif defined(CONFIG_SH4)
# include <asm/cpu_sh4.h>
#endif
#endif
diff --git a/arch/sh/lib/time_sh2.c b/arch/sh/lib/time_sh2.c
index be3896c..4b1f47b 100644
--- a/arch/sh/lib/time_sh2.c
+++ b/arch/sh/lib/time_sh2.c
@@ -84,5 +84,5 @@
unsigned long get_tbclk(void)
{
- return CONFIG_SYS_HZ;
+ return CONFIG_SH_CMT_CLK_FREQ;
}
diff --git a/board/friendlyarm/mini2440/Makefile b/board/armltd/vexpress64/Makefile
similarity index 67%
rename from board/friendlyarm/mini2440/Makefile
rename to board/armltd/vexpress64/Makefile
index f367107..e009141 100644
--- a/board/friendlyarm/mini2440/Makefile
+++ b/board/armltd/vexpress64/Makefile
@@ -1,8 +1,8 @@
#
-# (C) Copyright 2012
+# (C) Copyright 2000-2004
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y := mini2440.o
+obj-y := vexpress64.o
diff --git a/board/armltd/vexpress64/vexpress64.c b/board/armltd/vexpress64/vexpress64.c
new file mode 100644
index 0000000..2ec3bc9
--- /dev/null
+++ b/board/armltd/vexpress64/vexpress64.c
@@ -0,0 +1,56 @@
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ * Sharma Bhupesh <bhupesh.sharma@freescale.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <malloc.h>
+#include <errno.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <linux/compiler.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+ return 0;
+}
+
+int dram_init(void)
+{
+ /*
+ * Clear spin table so that secondary processors
+ * observe the correct value after waken up from wfe.
+ */
+ *(unsigned long *)CPU_RELEASE_ADDR = 0;
+
+ gd->ram_size = PHYS_SDRAM_1_SIZE;
+ return 0;
+}
+
+int timer_init(void)
+{
+ return 0;
+}
+
+/*
+ * Board specific reset that is system reset.
+ */
+void reset_cpu(ulong addr)
+{
+}
+
+/*
+ * Board specific ethernet initialization routine.
+ */
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+#ifdef CONFIG_SMC91111
+ rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
+#endif
+ return rc;
+}
diff --git a/board/bf609-ezkit/bf609-ezkit.c b/board/bf609-ezkit/bf609-ezkit.c
index 0388226..cfc64fe 100644
--- a/board/bf609-ezkit/bf609-ezkit.c
+++ b/board/bf609-ezkit/bf609-ezkit.c
@@ -10,6 +10,7 @@
#include <netdev.h>
#include <asm/blackfin.h>
#include <asm/io.h>
+#include <asm/sdh.h>
#include <asm/portmux.h>
#include "soft_switch.h"
diff --git a/board/freescale/b4860qds/b4_rcw.cfg b/board/freescale/b4860qds/b4_rcw.cfg
index 577dabf..597d391 100644
--- a/board/freescale/b4860qds/b4_rcw.cfg
+++ b/board/freescale/b4860qds/b4_rcw.cfg
@@ -2,6 +2,6 @@
aa55aa55 010e0100
# serdes protocol 0x2A_0x98
140e0018 0f001218 00000000 00000000
-54980000 9000a000 f8025000 a9000000
+54980000 9000a000 e8104000 a9000000
01000000 00000000 00000000 0001b1f8
00000000 14000020 00000000 00000011
diff --git a/board/freescale/bsc9131rdb/tlb.c b/board/freescale/bsc9131rdb/tlb.c
index 669fe8a..c8ecf5d 100644
--- a/board/freescale/bsc9131rdb/tlb.c
+++ b/board/freescale/bsc9131rdb/tlb.c
@@ -30,7 +30,7 @@
SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 0, BOOKE_PAGESZ_4K, 1),
-#ifdef CONFIG_SPL_NAND_MINIMAL
+#ifdef CONFIG_SPL_NAND_BOOT
SET_TLB_ENTRY(1, 0xffffe000, 0xffffe000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 10, BOOKE_PAGESZ_4K, 1),
diff --git a/board/freescale/bsc9132qds/tlb.c b/board/freescale/bsc9132qds/tlb.c
index 02655e9..07febc2 100644
--- a/board/freescale/bsc9132qds/tlb.c
+++ b/board/freescale/bsc9132qds/tlb.c
@@ -30,7 +30,7 @@
SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 0, BOOKE_PAGESZ_4K, 1),
-#ifdef CONFIG_SPL_NAND_MINIMAL
+#ifdef CONFIG_SPL_NAND_BOOT
SET_TLB_ENTRY(1, 0xffffe000, 0xffffe000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 10, BOOKE_PAGESZ_4K, 1),
diff --git a/board/freescale/common/p_corenet/Makefile b/board/freescale/common/p_corenet/Makefile
index 889c493..1f399d2 100644
--- a/board/freescale/common/p_corenet/Makefile
+++ b/board/freescale/common/p_corenet/Makefile
@@ -5,8 +5,6 @@
# SPDX-License-Identifier: GPL-2.0+
#
-CPPFLAGS += -I$(TOPDIR)
-
obj-y += law.o
obj-$(CONFIG_PCI) += pci.o
obj-y += tlb.o
diff --git a/board/freescale/p1010rdb/tlb.c b/board/freescale/p1010rdb/tlb.c
index a7af0f6..a3d36b3 100644
--- a/board/freescale/p1010rdb/tlb.c
+++ b/board/freescale/p1010rdb/tlb.c
@@ -30,7 +30,7 @@
SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 0, BOOKE_PAGESZ_4K, 1),
-#ifdef CONFIG_SPL_NAND_MINIMAL
+#ifdef CONFIG_SPL_NAND_BOOT
SET_TLB_ENTRY(1, 0xffffe000, 0xffffe000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 10, BOOKE_PAGESZ_4K, 1),
diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
index 966abb2..5f3d6fd 100644
--- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
+++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright 2010-2011, 2013 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -354,7 +354,7 @@
puts("No address specified for VSC7385 microcode.\n");
#endif
- mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+ mdio_info.regs = TSEC_GET_MDIO_REGS_BASE(1);
mdio_info.name = DEFAULT_MII_NAME;
fsl_pq_mdio_init(bis, &mdio_info);
diff --git a/board/freescale/t1040qds/t1040_pbi.cfg b/board/freescale/t1040qds/t1040_pbi.cfg
index 624398a..10b1a6d 100644
--- a/board/freescale/t1040qds/t1040_pbi.cfg
+++ b/board/freescale/t1040qds/t1040_pbi.cfg
@@ -3,7 +3,7 @@
09010000 00200400
09138000 00000000
091380c0 00000100
-#Configure CPC1 as 512KB SRAM
+#Configure CPC1 as 256KB SRAM
09010100 00000000
09010104 fffc0007
09010f00 08000000
diff --git a/board/freescale/t1040qds/t1040qds.c b/board/freescale/t1040qds/t1040qds.c
index 2aa176c..de3ea5c 100644
--- a/board/freescale/t1040qds/t1040qds.c
+++ b/board/freescale/t1040qds/t1040qds.c
@@ -239,3 +239,8 @@
printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1]));
}
}
+
+int board_need_mem_reset(void)
+{
+ return 1;
+}
diff --git a/board/friendlyarm/mini2440/mini2440.c b/board/friendlyarm/mini2440/mini2440.c
deleted file mode 100644
index 59ed054..0000000
--- a/board/friendlyarm/mini2440/mini2440.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * (C) Copyright 2009
- * Michel Pollet <buserror@gmail.com>
- *
- * (C) Copyright 2012
- * Gabriel Huau <contact@huau-gabriel.fr>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/s3c2440.h>
-#include <asm/arch/iomux.h>
-#include <asm/arch/gpio.h>
-#include <asm/io.h>
-#include <asm/gpio.h>
-#include <netdev.h>
-#include "mini2440.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static inline void pll_delay(unsigned long loops)
-{
- __asm__ volatile ("1:\n"
- "subs %0, %1, #1\n"
- "bne 1b" : "=r" (loops) : "0" (loops));
-}
-
-int board_early_init_f(void)
-{
- struct s3c24x0_clock_power * const clk_power =
- s3c24x0_get_base_clock_power();
-
- /* to reduce PLL lock time, adjust the LOCKTIME register */
- clk_power->locktime = 0xFFFFFF; /* Max PLL Lock time count */
- clk_power->clkdivn = CLKDIVN_VAL;
-
- /* configure UPLL */
- clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
- /* some delay between MPLL and UPLL */
- pll_delay(100);
-
- /* configure MPLL */
- clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
-
- /* some delay between MPLL and UPLL */
- pll_delay(10000);
-
- return 0;
-}
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-int board_init(void)
-{
- struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
-
- /* IOMUX Port H : UART Configuration */
- gpio->gphcon = IOMUXH_nCTS0 | IOMUXH_nRTS0 | IOMUXH_TXD0 | IOMUXH_RXD0 |
- IOMUXH_TXD1 | IOMUXH_RXD1 | IOMUXH_TXD2 | IOMUXH_RXD2;
-
- gpio_direction_output(GPH8, 0);
- gpio_direction_output(GPH9, 0);
- gpio_direction_output(GPH10, 0);
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = CONFIG_BOOT_PARAM_ADDR;
-
- return 0;
-}
-
-int dram_init(void)
-{
- struct s3c24x0_memctl *memctl = s3c24x0_get_base_memctl();
-
- /*
- * Configuring bus width and timing
- * Initialize clocks for each bank 0..5
- * Bank 3 and 4 are used for DM9000
- */
- writel(BANK_CONF, &memctl->bwscon);
- writel(B0_CONF, &memctl->bankcon[0]);
- writel(B1_CONF, &memctl->bankcon[1]);
- writel(B2_CONF, &memctl->bankcon[2]);
- writel(B3_CONF, &memctl->bankcon[3]);
- writel(B4_CONF, &memctl->bankcon[4]);
- writel(B5_CONF, &memctl->bankcon[5]);
-
- /* Bank 6 and 7 are used for DRAM */
- writel(SDRAM_64MB, &memctl->bankcon[6]);
- writel(SDRAM_64MB, &memctl->bankcon[7]);
-
- writel(MEM_TIMING, &memctl->refresh);
- writel(BANKSIZE_CONF, &memctl->banksize);
- writel(B6_MRSR, &memctl->mrsrb6);
- writel(B7_MRSR, &memctl->mrsrb7);
-
- gd->ram_size = get_ram_size((void *) CONFIG_SYS_SDRAM_BASE,
- PHYS_SDRAM_SIZE);
- return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
-#ifdef CONFIG_DRIVER_DM9000
- return dm9000_initialize(bis);
-#else
- return 0;
-#endif
-}
diff --git a/board/friendlyarm/mini2440/mini2440.h b/board/friendlyarm/mini2440/mini2440.h
deleted file mode 100644
index db386ea..0000000
--- a/board/friendlyarm/mini2440/mini2440.h
+++ /dev/null
@@ -1,144 +0,0 @@
-#ifndef __MINI2440_BOARD_CONF_H__
-#define __MINI2440_BOARD_CONF_H__
-
-/* PLL Parameters */
-#define CLKDIVN_VAL 7
-#define M_MDIV 0x7f
-#define M_PDIV 0x2
-#define M_SDIV 0x1
-
-#define U_M_MDIV 0x38
-#define U_M_PDIV 0x2
-#define U_M_SDIV 0x2
-
-/* BWSCON */
-#define DW8 0x0
-#define DW16 0x1
-#define DW32 0x2
-#define WAIT (0x1<<2)
-#define UBLB (0x1<<3)
-
-#define B1_BWSCON (DW32)
-#define B2_BWSCON (DW16)
-#define B3_BWSCON (DW16 + WAIT + UBLB)
-#define B4_BWSCON (DW16 + WAIT + UBLB)
-#define B5_BWSCON (DW16)
-#define B6_BWSCON (DW32)
-#define B7_BWSCON (DW32)
-
-/*
- * Bank Configuration
- */
-#define B0_Tacs 0x0 /* 0clk */
-#define B0_Tcos 0x0 /* 0clk */
-#define B0_Tacc 0x7 /* 14clk */
-#define B0_Tcoh 0x0 /* 0clk */
-#define B0_Tah 0x0 /* 0clk */
-#define B0_Tacp 0x0 /* 0clk */
-#define B0_PMC 0x0 /* normal */
-
-#define B1_Tacs 0x0
-#define B1_Tcos 0x0
-#define B1_Tacc 0x7
-#define B1_Tcoh 0x0
-#define B1_Tah 0x0
-#define B1_Tacp 0x0
-#define B1_PMC 0x0
-
-#define B2_Tacs 0x0
-#define B2_Tcos 0x0
-#define B2_Tacc 0x7
-#define B2_Tcoh 0x0
-#define B2_Tah 0x0
-#define B2_Tacp 0x0
-#define B2_PMC 0x0
-
-#define B3_Tacs 0x0
-#define B3_Tcos 0x3 /* 4clk */
-#define B3_Tacc 0x7
-#define B3_Tcoh 0x1 /* 1clk */
-#define B3_Tah 0x3 /* 4clk */
-#define B3_Tacp 0x0
-#define B3_PMC 0x0
-
-#define B4_Tacs 0x0
-#define B4_Tcos 0x3
-#define B4_Tacc 0x7
-#define B4_Tcoh 0x1
-#define B4_Tah 0x3
-#define B4_Tacp 0x0
-#define B4_PMC 0x0
-
-#define B5_Tacs 0x0
-#define B5_Tcos 0x0
-#define B5_Tacc 0x7
-#define B5_Tcoh 0x0
-#define B5_Tah 0x0
-#define B5_Tacp 0x0
-#define B5_PMC 0x0
-
-/*
- * SDRAM Configuration
- */
-#define SDRAM_MT 0x3 /* SDRAM */
-#define SDRAM_Trcd 0x0 /* 2clk */
-#define SDRAM_SCAN_9 0x1 /* 9bit */
-#define SDRAM_SCAN_10 0x2 /* 10bit */
-
-#define SDRAM_64MB ((SDRAM_MT<<15) + (SDRAM_Trcd<<2) + (SDRAM_SCAN_9))
-
-/*
- * Refresh Parameter
- */
-#define REFEN 0x1 /* Refresh enable */
-#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */
-#define Trp 0x1 /* 3clk */
-#define Trc 0x3 /* 7clk */
-#define Tchr 0x0 /* unused */
-#define REFCNT 1012 /* period=10.37us, HCLK=100Mhz, (2048 + 1-10.37*100) */
-
-/*
- * MRSR Parameter
- */
-#define BL 0x0
-#define BT 0x0
-#define CL 0x3 /* 3 clocks */
-#define TM 0x0
-#define WBL 0x0
-
-/*
- * BankSize Parameter
- */
-#define BK76MAP 0x2 /* 128MB/128MB */
-#define SCLK_EN 0x1 /* SCLK active */
-#define SCKE_EN 0x1 /* SDRAM power down mode enable */
-#define BURST_EN 0x1 /* Burst enable */
-
-/*
- * Register values
- */
-#define BANK_CONF ((0 + (B1_BWSCON<<4) + (B2_BWSCON<<8) + (B3_BWSCON<<12) + \
- (B4_BWSCON<<16) + (B5_BWSCON<<20) + (B6_BWSCON<<24) + \
- (B7_BWSCON<<28)))
-
-#define B0_CONF ((B0_Tacs<<13) + (B0_Tcos<<11) + (B0_Tacc<<8) + \
- (B0_Tcoh<<6) + (B0_Tah<<4) + (B0_Tacp<<2) + (B0_PMC))
-#define B1_CONF ((B1_Tacs<<13) + (B1_Tcos<<11) + (B1_Tacc<<8) + \
- (B1_Tcoh<<6) + (B1_Tah<<4) + (B1_Tacp<<2) + (B1_PMC))
-#define B2_CONF ((B2_Tacs<<13) + (B2_Tcos<<11) + (B2_Tacc<<8) + \
- (B2_Tcoh<<6) + (B2_Tah<<4) + (B2_Tacp<<2) + (B2_PMC))
-#define B3_CONF ((B3_Tacs<<13) + (B3_Tcos<<11) + (B3_Tacc<<8) + \
- (B3_Tcoh<<6) + (B3_Tah<<4) + (B3_Tacp<<2) + (B3_PMC))
-#define B4_CONF ((B4_Tacs<<13) + (B4_Tcos<<11) + (B4_Tacc<<8) + \
- (B4_Tcoh<<6) + (B4_Tah<<4) + (B4_Tacp<<2) + (B4_PMC))
-#define B5_CONF ((B5_Tacs<<13) + (B5_Tcos<<11) + (B5_Tacc<<8) + \
- (B5_Tcoh<<6) + (B5_Tah<<4) + (B5_Tacp<<2) + (B5_PMC))
-
-#define MEM_TIMING (REFEN<<23) + (TREFMD<<22) + (Trp<<20) + \
- (Trc<<18) + (Tchr<<16) + REFCNT
-
-#define BANKSIZE_CONF (BK76MAP) + (SCLK_EN<<4) + (SCKE_EN<<5) + (BURST_EN<<7)
-#define B6_MRSR (CL<<4)
-#define B7_MRSR (CL<<4)
-
-#endif
diff --git a/board/linkstation/Makefile b/board/linkstation/Makefile
deleted file mode 100644
index 3eeba7d..0000000
--- a/board/linkstation/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = linkstation.o ide.o hwctl.o avr.o
diff --git a/board/linkstation/avr.c b/board/linkstation/avr.c
deleted file mode 100644
index 62e586b..0000000
--- a/board/linkstation/avr.c
+++ /dev/null
@@ -1,280 +0,0 @@
-/*
- * avr.c
- *
- * AVR functions
- *
- * Copyright (C) 2006 Mihai Georgian <u-boot@linuxnotincluded.org.uk>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-#include <ns16550.h>
-#include <stdio_dev.h>
-
-/* Button codes from the AVR */
-#define PWRR 0x20 /* Power button release */
-#define PWRP 0x21 /* Power button push */
-#define RESR 0x22 /* Reset button release */
-#define RESP 0x23 /* Reset button push */
-#define AVRINIT 0x33 /* Init complete */
-#define AVRRESET 0x31 /* Reset request */
-
-/* LED commands */
-#define PWRBLINKSTRT '[' /* Blink power LED */
-#define PWRBLINKSTOP 'Z' /* Solid power LED */
-#define HDDLEDON 'W' /* HDD LED on */
-#define HDDLEDOFF 'V' /* HDD LED off */
-#define HDDBLINKSTRT 'Y' /* HDD LED start blink */
-#define HDDBLINKSTOP 'X' /* HDD LED stop blink */
-
-/* Timings for LEDs blinking to show choice */
-#define PULSETIME 250 /* msecs */
-#define LONGPAUSE (5 * PULSETIME)
-
-/* Button press times */
-#define PUSHHOLD 1000 /* msecs */
-#define NOBUTTON (6 * (LONGPAUSE+PULSETIME))
-
-/* Boot and console choices */
-#define MAX_BOOT_CHOICE 3
-
-static char *consoles[] = {
- "serial",
-#if defined(CONFIG_NETCONSOLE)
- "nc",
-#endif
-};
-#define MAX_CONS_CHOICE (sizeof(consoles)/sizeof(char *))
-
-#if !defined(CONFIG_NETCONSOLE)
-#define DEF_CONS_CHOICE 0
-#else
-#define DEF_CONS_CHOICE 1
-#endif
-
-#define perror(fmt, args...) printf("%s: " fmt, __FUNCTION__ , ##args)
-
-extern void miconCntl_SendCmd(unsigned char dat);
-extern void miconCntl_DisWDT(void);
-
-static int boot_stop;
-
-static int boot_choice = 1;
-static int cons_choice = DEF_CONS_CHOICE;
-
-static char envbuffer[16];
-
-void init_AVR_DUART (void)
-{
- NS16550_t AVR_port = (NS16550_t) CONFIG_SYS_NS16550_COM2;
- int clock_divisor = CONFIG_SYS_NS16550_CLK / 16 / 9600;
-
- /*
- * AVR port init sequence taken from
- * the original Linkstation init code
- * Normal U-Boot serial reinit doesn't
- * work because the AVR uses even parity
- */
- AVR_port->lcr = 0x00;
- AVR_port->ier = 0x00;
- AVR_port->lcr = UART_LCR_BKSE;
- AVR_port->dll = clock_divisor & 0xff;
- AVR_port->dlm = (clock_divisor >> 8) & 0xff;
- AVR_port->lcr = UART_LCR_WLS_8 | UART_LCR_PEN | UART_LCR_EPS;
- AVR_port->mcr = 0x00;
- AVR_port->fcr = UART_FCR_FIFO_EN | UART_FCR_RXSR | UART_FCR_TXSR;
-
- miconCntl_DisWDT();
-
- boot_stop = 0;
- miconCntl_SendCmd(PWRBLINKSTRT);
-}
-
-static inline int avr_tstc(void)
-{
- return (NS16550_tstc((NS16550_t)CONFIG_SYS_NS16550_COM2));
-}
-
-static inline char avr_getc(void)
-{
- return (NS16550_getc((NS16550_t)CONFIG_SYS_NS16550_COM2));
-}
-
-static int push_timeout(char button_code)
-{
- ulong push_start = get_timer(0);
- while (get_timer(push_start) <= PUSHHOLD)
- if (avr_tstc() && avr_getc() == button_code)
- return 0;
- return 1;
-}
-
-static void next_boot_choice(void)
-{
- ulong return_start;
- ulong pulse_start;
- int on_times;
- int button_on;
- int led_state;
- char c;
-
- button_on = 0;
- return_start = get_timer(0);
-
- on_times = boot_choice;
- led_state = 0;
- miconCntl_SendCmd(HDDLEDOFF);
- pulse_start = get_timer(0);
-
- while (get_timer(return_start) <= NOBUTTON || button_on) {
- if (avr_tstc()) {
- c = avr_getc();
- if (c == PWRP)
- button_on = 1;
- else if (c == PWRR) {
- button_on = 0;
- return_start = get_timer(0);
- if (++boot_choice > MAX_BOOT_CHOICE)
- boot_choice = 1;
- sprintf(envbuffer, "bootcmd%d", boot_choice);
- if (getenv(envbuffer)) {
- sprintf(envbuffer, "run bootcmd%d", boot_choice);
- setenv("bootcmd", envbuffer);
- }
- on_times = boot_choice;
- led_state = 1;
- miconCntl_SendCmd(HDDLEDON);
- pulse_start = get_timer(0);
- } else {
- perror("Unexpected code: 0x%02X\n", c);
- }
- }
- if (on_times && get_timer(pulse_start) > PULSETIME) {
- if (led_state == 1) {
- --on_times;
- led_state = 0;
- miconCntl_SendCmd(HDDLEDOFF);
- } else {
- led_state = 1;
- miconCntl_SendCmd(HDDLEDON);
- }
- pulse_start = get_timer(0);
- }
- if (!on_times && get_timer(pulse_start) > LONGPAUSE) {
- on_times = boot_choice;
- led_state = 1;
- miconCntl_SendCmd(HDDLEDON);
- pulse_start = get_timer(0);
- }
- }
- if (led_state)
- miconCntl_SendCmd(HDDLEDOFF);
-}
-
-void next_cons_choice(int console)
-{
- ulong return_start;
- ulong pulse_start;
- int on_times;
- int button_on;
- int led_state;
- char c;
-
- button_on = 0;
- cons_choice = console;
- return_start = get_timer(0);
-
- on_times = cons_choice+1;
- led_state = 1;
- miconCntl_SendCmd(HDDLEDON);
- pulse_start = get_timer(0);
-
- while (get_timer(return_start) <= NOBUTTON || button_on) {
- if (avr_tstc()) {
- c = avr_getc();
- if (c == RESP)
- button_on = 1;
- else if (c == RESR) {
- button_on = 0;
- return_start = get_timer(0);
- cons_choice = (cons_choice + 1) % MAX_CONS_CHOICE;
- console_assign(stdin, consoles[cons_choice]);
- console_assign(stdout, consoles[cons_choice]);
- console_assign(stderr, consoles[cons_choice]);
- on_times = cons_choice+1;
- led_state = 0;
- miconCntl_SendCmd(HDDLEDOFF);
- pulse_start = get_timer(0);
- } else {
- perror("Unexpected code: 0x%02X\n", c);
- }
- }
- if (on_times && get_timer(pulse_start) > PULSETIME) {
- if (led_state == 0) {
- --on_times;
- led_state = 1;
- miconCntl_SendCmd(HDDLEDON);
- } else {
- led_state = 0;
- miconCntl_SendCmd(HDDLEDOFF);
- }
- pulse_start = get_timer(0);
- }
- if (!on_times && get_timer(pulse_start) > LONGPAUSE) {
- on_times = cons_choice+1;
- led_state = 0;
- miconCntl_SendCmd(HDDLEDOFF);
- pulse_start = get_timer(0);
- }
- }
- if (led_state);
- miconCntl_SendCmd(HDDLEDOFF);
-}
-
-int avr_input(void)
-{
- char avr_button;
-
- if (!avr_tstc())
- return 0;
-
- avr_button = avr_getc();
- switch (avr_button) {
- case PWRP:
- if (push_timeout(PWRR)) {
- /* Timeout before power button release */
- boot_stop = ~boot_stop;
- if (boot_stop)
- miconCntl_SendCmd(PWRBLINKSTOP);
- else
- miconCntl_SendCmd(PWRBLINKSTRT);
- /* Wait for power button release */
- while (avr_getc() != PWRR)
- ;
- } else
- /* Power button released */
- next_boot_choice();
- break;
- case RESP:
- /* Wait for Reset button release */
- while (avr_getc() != RESR)
- ;
- next_cons_choice(cons_choice);
- break;
- case AVRINIT:
- return 0;
- default:
- perror("Unexpected code: 0x%02X\n", avr_button);
- return 0;
- }
- if (boot_stop)
- return (-3);
- else
- return (-2);
-}
-
-void avr_StopBoot(void)
-{
- boot_stop = ~0;
- miconCntl_SendCmd(PWRBLINKSTOP);
-}
diff --git a/board/linkstation/hwctl.c b/board/linkstation/hwctl.c
deleted file mode 100644
index d2090be..0000000
--- a/board/linkstation/hwctl.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * hwctl.c
- *
- * LinkStation HW Control Driver
- *
- * Copyright (C) 2001-2004 BUFFALO INC.
- *
- * This software may be used and distributed according to the terms of
- * the GNU General Public License (GPL), incorporated herein by reference.
- * Drivers based on or derived from this code fall under the GPL and must
- * retain the authorship, copyright and license notice. This file is not
- * a complete program and may only be used when the entire operating
- * system is licensed under the GPL.
- *
- */
-
-#include <config.h>
-#include <common.h>
-#include <command.h>
-#include <asm/io.h>
-
-#define AVR_PORT CONFIG_SYS_NS16550_COM2
-
-/* 2005.5.10 BUFFALO add */
-/*--------------------------------------------------------------*/
-static inline void miconCntl_SendUart(unsigned char dat)
-{
- out_8((unsigned char *)AVR_PORT, dat);
- mdelay(1);
-}
-
-/*--------------------------------------------------------------*/
-void miconCntl_SendCmd(unsigned char dat)
-{
- int i;
-
- for (i=0; i<4; i++){
- miconCntl_SendUart(dat);
- }
-}
-
-/*--------------------------------------------------------------*/
-void miconCntl_FanLow(void)
-{
-#ifdef CONFIG_HTGL
- miconCntl_SendCmd(0x5C);
-#endif
-}
-
-/*--------------------------------------------------------------*/
-void miconCntl_FanHigh(void)
-{
-#ifdef CONFIG_HTGL
- miconCntl_SendCmd(0x5D);
-#endif
-}
-
-/*--------------------------------------------------------------*/
-/* 1000Mbps */
-void miconCntl_Eth1000M(int up)
-{
-#ifdef CONFIG_HTGL
- if (up)
- miconCntl_SendCmd(0x93);
- else
- miconCntl_SendCmd(0x92);
-#else
- if (up)
- miconCntl_SendCmd(0x5D);
- else
- miconCntl_SendCmd(0x5C);
-#endif
-}
-
-/*--------------------------------------------------------------*/
-/* 100Mbps */
-void miconCntl_Eth100M(int up)
-{
-#ifdef CONFIG_HTGL
- if (up)
- miconCntl_SendCmd(0x91);
- else
- miconCntl_SendCmd(0x90);
-#else
- if (up)
- miconCntl_SendCmd(0x5C);
-#endif
-}
-
-/*--------------------------------------------------------------*/
-/* 10Mbps */
-void miconCntl_Eth10M(int up)
-{
-#ifdef CONFIG_HTGL
- if (up)
- miconCntl_SendCmd(0x8F);
- else
- miconCntl_SendCmd(0x8E);
-#else
- if (up)
- miconCntl_SendCmd(0x5C);
-#endif
-}
-
-/*--------------------------------------------------------------*/
-/* */
-void miconCntl_5f(void)
-{
- miconCntl_SendCmd(0x5F);
- mdelay(100);
-}
-
-/*--------------------------------------------------------------*/
-/* "reboot start" signal */
-void miconCntl_Reboot(void)
-{
- miconCntl_SendCmd(0x43);
-}
-
-/*--------------------------------------------------------------*/
-/* Disable watchdog timer */
-void miconCntl_DisWDT(void)
-{
- miconCntl_SendCmd(0x41); /* A */
- miconCntl_SendCmd(0x46); /* F */
- miconCntl_SendCmd(0x4A); /* J */
- miconCntl_SendCmd(0x3E); /* > */
- miconCntl_SendCmd(0x56); /* V */
- miconCntl_SendCmd(0x3E); /* > */
- miconCntl_SendCmd(0x5A); /* Z */
- miconCntl_SendCmd(0x56); /* V */
- miconCntl_SendCmd(0x4B); /* K */
-}
diff --git a/board/linkstation/ide.c b/board/linkstation/ide.c
deleted file mode 100644
index 7b3fe65..0000000
--- a/board/linkstation/ide.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-/* ide.c - ide support functions */
-
-
-#include <common.h>
-
-#ifdef CONFIG_CMD_IDE
-#include <ata.h>
-#include <ide.h>
-#include <pci.h>
-
-#define IT8212_PCI_CpuCONTROL 0x5e
-#define IT8212_PCI_PciModeCONTROL 0x50
-#define IT8212_PCI_IdeIoCONFIG 0x40
-#define IT8212_PCI_IdeBusSkewCONTROL 0x4c
-#define IT8212_PCI_IdeDrivingCURRENT 0x42
-
-extern struct pci_controller hose;
-
-int ide_preinit (void)
-{
- int status;
- pci_dev_t devbusfn;
- int l;
-
- status = 1;
- for (l = 0; l < CONFIG_SYS_IDE_MAXBUS; l++) {
- ide_bus_offset[l] = -ATA_STATUS;
- }
- devbusfn = pci_find_device(PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_680, 0);
- if (devbusfn == -1)
- devbusfn = pci_find_device(PCI_VENDOR_ID_ITE,PCI_DEVICE_ID_ITE_8212,0);
- if (devbusfn != -1) {
- u32 ide_bus_offset32;
-
- status = 0;
-
- pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0,
- &ide_bus_offset32);
- ide_bus_offset[0] = ide_bus_offset32 & 0xfffffffe;
- ide_bus_offset[0] = pci_hose_bus_to_phys(&hose,
- ide_bus_offset[0] & 0xfffffffe,
- PCI_REGION_IO);
- if (CONFIG_SYS_IDE_MAXBUS > 1) {
- pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_2,
- (u32 *) &ide_bus_offset[1]);
- ide_bus_offset[1] &= 0xfffffffe;
- ide_bus_offset[1] = pci_hose_bus_to_phys(&hose,
- ide_bus_offset[1] & 0xfffffffe,
- PCI_REGION_IO);
- }
- }
-
- if (pci_find_device (PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8212, 0) != -1) {
- pci_write_config_byte(devbusfn, IT8212_PCI_CpuCONTROL, 0x01);
- pci_write_config_byte(devbusfn, IT8212_PCI_PciModeCONTROL, 0x00);
- pci_write_config_word(devbusfn, PCI_COMMAND, 0x0047);
-#ifdef CONFIG_IT8212_SECONDARY_ENABLE
- pci_write_config_word(devbusfn, IT8212_PCI_IdeIoCONFIG, 0xA0F3);
-#else
- pci_write_config_word(devbusfn, IT8212_PCI_IdeIoCONFIG, 0x8031);
-#endif
- pci_write_config_dword(devbusfn, IT8212_PCI_IdeBusSkewCONTROL, 0x02040204);
-/* __LS_COMMENT__ BUFFALO changed 2004.11.10 changed for EMI */
- pci_write_config_byte(devbusfn, IT8212_PCI_IdeDrivingCURRENT, 0x36); /* 10mA */
-/* pci_write_config_byte(dev, IT8212_PCI_IdeDrivingCURRENT, 0x09); */ /* 4mA */
-/* pci_write_config_byte(dev, IT8212_PCI_IdeDrivingCURRENT, 0x12); */ /* 6mA */
-/* pci_write_config_byte(dev, IT8212_PCI_IdeDrivingCURRENT, 0x24); */ /* 6mA,2mA */
-/* pci_write_config_byte(dev, IT8212_PCI_IdeDrivingCURRENT, 0x2D); */ /* 8mA,4mA */
- pci_write_config_byte(devbusfn, PCI_LATENCY_TIMER, 0x00);
- }
-
- return (status);
-}
-
-void ide_set_reset (int flag) {
- return;
-}
-
-#endif /* CONFIG_CMD_IDE */
diff --git a/board/linkstation/linkstation.c b/board/linkstation/linkstation.c
deleted file mode 100644
index 75cda86..0000000
--- a/board/linkstation/linkstation.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * linkstation.c
- *
- * Misc LinkStation specific functions
- *
- * Copyright (C) 2006 Mihai Georgian <u-boot@linuxnotincluded.org.uk>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <version.h>
-#include <mpc824x.h>
-#include <asm/io.h>
-#include <ns16550.h>
-#include <netdev.h>
-
-#ifdef CONFIG_PCI
-#include <pci.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern void init_AVR_DUART(void);
-
-int checkboard (void)
-{
- char *p;
- bd_t *bd = gd->bd;
-
- init_AVR_DUART();
-
- if ((p = getenv ("console_nr")) != NULL) {
- unsigned long con_nr = simple_strtoul (p, NULL, 10) & 3;
-
- bd->bi_baudrate &= ~3;
- bd->bi_baudrate |= con_nr & 3;
- }
- return 0;
-}
-
-phys_size_t initdram (int board_type)
-{
- return (get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE));
-}
-
-/*
- * Initialize PCI Devices
- */
-#ifdef CONFIG_PCI
-
-#ifndef CONFIG_PCI_PNP
-
-static struct pci_config_table pci_linkstation_config_table[] = {
- /* vendor, device, class */
- /* bus, dev, func */
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_ANY_ID, 0x0b, 0, /* AN983B or RTL8110S */
- /* ethernet controller */
- pci_cfgfunc_config_device, { PCI_ETH_IOADDR,
- PCI_ETH_MEMADDR,
- PCI_COMMAND_IO |
- PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER }},
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_ANY_ID, 0x0c, 0, /* SII680 or IT8211AF */
- /* ide controller */
- pci_cfgfunc_config_device, { PCI_IDE_IOADDR,
- PCI_IDE_MEMADDR,
- PCI_COMMAND_IO |
- PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER }},
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_ANY_ID, 0x0e, 0, /* D720101 USB controller, 1st USB 1.1 */
- pci_cfgfunc_config_device, { PCI_USB0_IOADDR,
- PCI_USB0_MEMADDR,
- PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER }},
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_ANY_ID, 0x0e, 1, /* D720101 USB controller, 2nd USB 1.1 */
- pci_cfgfunc_config_device, { PCI_USB1_IOADDR,
- PCI_USB1_MEMADDR,
- PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER }},
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_ANY_ID, 0x0e, 2, /* D720101 USB controller, USB 2.0 */
- pci_cfgfunc_config_device, { PCI_USB2_IOADDR,
- PCI_USB2_MEMADDR,
- PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER }},
- { }
-};
-#endif
-
-struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
- config_table:pci_linkstation_config_table,
-#endif
-};
-
-void pci_init_board (void)
-{
- pci_mpc824x_init (&hose);
-
- /* Reset USB 1.1 */
- /* Haven't seen any change without these on a HG, maybe it is
- * needed on other models */
- out_le32((volatile unsigned*)(PCI_USB0_MEMADDR + 8), 1);
- out_le32((volatile unsigned*)(PCI_USB1_MEMADDR + 8), 1);
-}
-#endif /* CONFIG_PCI */
-
-#define UART_DCR 0x80004511
-int board_early_init_f (void)
-{
- /* set DUART mode */
- out_8((volatile u8*)UART_DCR, 1);
- return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
- return pci_eth_init(bis);
-}
diff --git a/board/logicpd/zoom2/Makefile b/board/logicpd/zoom2/Makefile
deleted file mode 100644
index 8ec5f25..0000000
--- a/board/logicpd/zoom2/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := zoom2.o
-obj-y += debug_board.o
-obj-y += zoom2_serial.o
-obj-$(CONFIG_STATUS_LED) += led.o
diff --git a/board/logicpd/zoom2/config.mk b/board/logicpd/zoom2/config.mk
deleted file mode 100644
index 1c382f7..0000000
--- a/board/logicpd/zoom2/config.mk
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# (C) Copyright 2009
-# Texas Instruments, <www.ti.com>
-#
-# Zoom II uses OMAP3 (ARM-CortexA8) CPU
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Physical Address:
-# 0x80000000 (bank0)
-# 0xA0000000 (bank1)
-# Linux-Kernel is expected to be at 0x80008000, entry 0x80008000
-# (mem base + reserved)
-
-# For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x80008000
diff --git a/board/logicpd/zoom2/debug_board.c b/board/logicpd/zoom2/debug_board.c
deleted file mode 100644
index 071f410..0000000
--- a/board/logicpd/zoom2/debug_board.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright (c) 2009 Wind River Systems, Inc.
- * Tom Rix <Tom.Rix@windriver.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-#include <asm/arch/cpu.h>
-#include <asm/io.h>
-#include <asm/arch/mux.h>
-#include <asm/gpio.h>
-
-#define DEBUG_BOARD_CONNECTED 1
-#define DEBUG_BOARD_NOT_CONNECTED 0
-
-static int debug_board_connected = DEBUG_BOARD_CONNECTED;
-
-static void zoom2_debug_board_detect (void)
-{
- int val = 0;
-
- if (!gpio_request(158, "")) {
- /*
- * GPIO to query for debug board
- * 158 db board query
- */
- gpio_direction_input(158);
- val = gpio_get_value(158);
- }
-
- if (!val)
- debug_board_connected = DEBUG_BOARD_NOT_CONNECTED;
-}
-
-int zoom2_debug_board_connected (void)
-{
- static int first_time = 1;
-
- if (first_time) {
- zoom2_debug_board_detect ();
- first_time = 0;
- }
- return debug_board_connected;
-}
diff --git a/board/logicpd/zoom2/led.c b/board/logicpd/zoom2/led.c
deleted file mode 100644
index 5d37ac1..0000000
--- a/board/logicpd/zoom2/led.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * Copyright (c) 2009 Wind River Systems, Inc.
- * Tom Rix <Tom.Rix@windriver.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-#include <status_led.h>
-#include <asm/arch/cpu.h>
-#include <asm/io.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/gpio.h>
-
-static unsigned int saved_state[2] = {STATUS_LED_OFF, STATUS_LED_OFF};
-
-/*
- * GPIO LEDs
- * 173 red
- * 154 blue
- * 61 blue2
- */
-#define ZOOM2_LED_RED 173
-#define ZOOM2_LED_BLUE 154
-#define ZOOM2_LED_BLUE2 61
-
-void red_led_off(void)
-{
- /* red */
- if (!gpio_request(ZOOM2_LED_RED, "")) {
- gpio_direction_output(ZOOM2_LED_RED, 0);
- gpio_set_value(ZOOM2_LED_RED, 0);
- }
- saved_state[STATUS_LED_RED] = STATUS_LED_OFF;
-}
-
-void blue_led_off(void)
-{
- /* blue */
- if (!gpio_request(ZOOM2_LED_BLUE, "")) {
- gpio_direction_output(ZOOM2_LED_BLUE, 0);
- gpio_set_value(ZOOM2_LED_BLUE, 0);
- }
-
- /* blue 2 */
- if (!gpio_request(ZOOM2_LED_BLUE2, "")) {
- gpio_direction_output(ZOOM2_LED_BLUE2, 0);
- gpio_set_value(ZOOM2_LED_BLUE2, 0);
- }
- saved_state[STATUS_LED_BLUE] = STATUS_LED_OFF;
-}
-
-void red_led_on(void)
-{
- blue_led_off();
-
- /* red */
- if (!gpio_request(ZOOM2_LED_RED, "")) {
- gpio_direction_output(ZOOM2_LED_RED, 0);
- gpio_set_value(ZOOM2_LED_RED, 1);
- }
- saved_state[STATUS_LED_RED] = STATUS_LED_ON;
-}
-
-void blue_led_on(void)
-{
- red_led_off();
-
- /* blue */
- if (!gpio_request(ZOOM2_LED_BLUE, "")) {
- gpio_direction_output(ZOOM2_LED_BLUE, 0);
- gpio_set_value(ZOOM2_LED_BLUE, 1);
- }
-
- /* blue 2 */
- if (!gpio_request(ZOOM2_LED_BLUE2, "")) {
- gpio_direction_output(ZOOM2_LED_BLUE2, 0);
- gpio_set_value(ZOOM2_LED_BLUE2, 1);
- }
-
- saved_state[STATUS_LED_BLUE] = STATUS_LED_ON;
-}
-
-void __led_init (led_id_t mask, int state)
-{
- __led_set (mask, state);
-}
-
-void __led_toggle (led_id_t mask)
-{
- if (STATUS_LED_BLUE == mask) {
- if (STATUS_LED_ON == saved_state[STATUS_LED_BLUE])
- blue_led_off();
- else
- blue_led_on();
- } else if (STATUS_LED_RED == mask) {
- if (STATUS_LED_ON == saved_state[STATUS_LED_RED])
- red_led_off();
- else
- red_led_on();
- }
-}
-
-void __led_set (led_id_t mask, int state)
-{
- if (STATUS_LED_BLUE == mask) {
- if (STATUS_LED_ON == state)
- blue_led_on();
- else
- blue_led_off();
- } else if (STATUS_LED_RED == mask) {
- if (STATUS_LED_ON == state)
- red_led_on();
- else
- red_led_off();
- }
-}
diff --git a/board/logicpd/zoom2/zoom2.c b/board/logicpd/zoom2/zoom2.c
deleted file mode 100644
index e14de04..0000000
--- a/board/logicpd/zoom2/zoom2.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * Copyright (c) 2009 Wind River Systems, Inc.
- * Tom Rix <Tom.Rix@windriver.com>
- *
- * Derived from Zoom1 code by
- * Nishanth Menon <nm@ti.com>
- * Sunil Kumar <sunilsaini05@gmail.com>
- * Shashi Ranjan <shashiranjanmca05@gmail.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- * Syed Mohammed Khasim <khasim@ti.com>
- *
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-#include <netdev.h>
-#ifdef CONFIG_STATUS_LED
-#include <status_led.h>
-#endif
-#include <twl4030.h>
-#include <asm/io.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/gpio.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/mach-types.h>
-#include "zoom2.h"
-#include "zoom2_serial.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * This the the zoom2, board specific, gpmc configuration for the
- * quad uart on the debug board. The more general gpmc configurations
- * are setup at the cpu level in arch/arm/cpu/armv7/omap3/mem.c
- *
- * The details of the setting of the serial gpmc setup are not available.
- * The values were provided by another party.
- */
-static u32 gpmc_serial_TL16CP754C[GPMC_MAX_REG] = {
- 0x00011000,
- 0x001F1F01,
- 0x00080803,
- 0x1D091D09,
- 0x041D1F1F,
- 0x1D0904C4, 0
-};
-
-/* Used to track the revision of the board */
-static zoom2_revision revision = ZOOM2_REVISION_UNKNOWN;
-
-/*
- * Routine: zoom2_get_revision
- * Description: Return the revision of the Zoom2 this code is running on.
- */
-zoom2_revision zoom2_get_revision(void)
-{
- return revision;
-}
-
-/*
- * Routine: zoom2_identify
- * Description: Detect which version of Zoom2 we are running on.
- */
-void zoom2_identify(void)
-{
- /*
- * To check for production board vs beta board,
- * check if gpio 94 is clear.
- *
- * No way yet to check for alpha board identity.
- * Alpha boards were produced in very limited quantities
- * and they are not commonly used. They are mentioned here
- * only for completeness.
- */
- if (!gpio_request(94, "")) {
- unsigned int val;
-
- gpio_direction_input(94);
- val = gpio_get_value(94);
-
- if (val)
- revision = ZOOM2_REVISION_BETA;
- else
- revision = ZOOM2_REVISION_PRODUCTION;
- }
-
- printf("Board revision ");
- switch (revision) {
- case ZOOM2_REVISION_PRODUCTION:
- printf("Production\n");
- break;
- case ZOOM2_REVISION_BETA:
- printf("Beta\n");
- break;
- default:
- printf("Unknown\n");
- break;
- }
-}
-
-/*
- * Routine: board_init
- * Description: Early hardware init.
- */
-int board_init (void)
-{
- u32 *gpmc_config;
-
- gpmc_init (); /* in SRAM or SDRAM, finish GPMC */
-
- /* Configure console support on zoom2 */
- gpmc_config = gpmc_serial_TL16CP754C;
- enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[3],
- SERIAL_TL16CP754C_BASE, GPMC_SIZE_16M);
-
- /* board id for Linux */
- gd->bd->bi_arch_number = MACH_TYPE_OMAP_ZOOM2;
- /* boot param addr */
- gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
-
-#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
- status_led_set (STATUS_LED_BOOT, STATUS_LED_ON);
-#endif
- return 0;
-}
-
-/*
- * Routine: misc_init_r
- * Description: Configure zoom board specific configurations
- */
-int misc_init_r(void)
-{
- zoom2_identify();
- twl4030_power_init();
- twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
- dieid_num_r();
-
- /*
- * Board Reset
- * The board is reset by holding the the large button
- * on the top right side of the main board for
- * eight seconds.
- *
- * There are reported problems of some beta boards
- * continously resetting. For those boards, disable resetting.
- */
- if (ZOOM2_REVISION_PRODUCTION <= zoom2_get_revision())
- twl4030_power_reset_init();
-
- return 0;
-}
-
-/*
- * Routine: set_muxconf_regs
- * Description: Setting up the configuration Mux registers specific to the
- * hardware. Many pins need to be moved from protect to primary
- * mode.
- */
-void set_muxconf_regs (void)
-{
- /* platform specific muxes */
- MUX_ZOOM2 ();
-}
-
-#ifdef CONFIG_GENERIC_MMC
-int board_mmc_init(bd_t *bis)
-{
- return omap_mmc_init(0, 0, 0, -1, -1);
-}
-#endif
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_LAN91C96
- rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/logicpd/zoom2/zoom2.h b/board/logicpd/zoom2/zoom2.h
deleted file mode 100644
index 850c790..0000000
--- a/board/logicpd/zoom2/zoom2.h
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * Copyright (c) 2009 Wind River Systems, Inc.
- * Tom Rix <Tom.Rix@windriver.com>
- *
- * Derived from: board/omap3/zoom1/zoom1.h
- * Nishanth Menon <nm@ti.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef _BOARD_ZOOM2_H_
-#define _BOARD_ZOOM2_H_
-
-const omap3_sysinfo sysinfo = {
- DDR_STACKED,
- "OMAP3 Zoom2 ",
- "NAND",
-};
-
-typedef enum {
- ZOOM2_REVISION_UNKNOWN = 0,
- ZOOM2_REVISION_ALPHA,
- ZOOM2_REVISION_BETA,
- ZOOM2_REVISION_PRODUCTION
-} zoom2_revision;
-
-zoom2_revision zoom2_get_revision(void);
-
-/*
- * IEN - Input Enable
- * IDIS - Input Disable
- * PTD - Pull type Down
- * PTU - Pull type Up
- * DIS - Pull type selection is inactive
- * EN - Pull type selection is active
- * M0 - Mode 0
- * The commented string gives the final mux configuration for that pin
- */
-#define MUX_ZOOM2() \
- /* SDRC*/\
- MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /* SDRC_D0 */\
- MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /* SDRC_D1 */\
- MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /* SDRC_D2 */\
- MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /* SDRC_D3 */\
- MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /* SDRC_D4 */\
- MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /* SDRC_D5 */\
- MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /* SDRC_D6 */\
- MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /* SDRC_D7 */\
- MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /* SDRC_D8 */\
- MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /* SDRC_D9 */\
- MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /* SDRC_D10 */\
- MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /* SDRC_D11 */\
- MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /* SDRC_D12 */\
- MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /* SDRC_D13 */\
- MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /* SDRC_D14 */\
- MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /* SDRC_D15 */\
- MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /* SDRC_D16 */\
- MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /* SDRC_D17 */\
- MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /* SDRC_D18 */\
- MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /* SDRC_D19 */\
- MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /* SDRC_D20 */\
- MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /* SDRC_D21 */\
- MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /* SDRC_D22 */\
- MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /* SDRC_D23 */\
- MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /* SDRC_D24 */\
- MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /* SDRC_D25 */\
- MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /* SDRC_D26 */\
- MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /* SDRC_D27 */\
- MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /* SDRC_D28 */\
- MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /* SDRC_D29 */\
- MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /* SDRC_D30 */\
- MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /* SDRC_D31 */\
- MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /* SDRC_CLK */\
- MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /* SDRC_DQS0 */\
- MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /* SDRC_DQS1 */\
- MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /* SDRC_DQS2 */\
- MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /* SDRC_DQS3 */\
-/* GPMC */\
- MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /* GPMC_A1 */\
- MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /* GPMC_A2 */\
- MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /* GPMC_A3 */\
- MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /* GPMC_A4 */\
- MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /* GPMC_A5 */\
- MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /* GPMC_A6 */\
- MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /* GPMC_A7 */\
- MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /* GPMC_A8 */\
- MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /* GPMC_A9 */\
- MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /* GPMC_A10 */\
- MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /* GPMC_D0 */\
- MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /* GPMC_D1 */\
- MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /* GPMC_D2 */\
- MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /* GPMC_D3 */\
- MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /* GPMC_D4 */\
- MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /* GPMC_D5 */\
- MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /* GPMC_D6 */\
- MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /* GPMC_D7 */\
- MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /* GPMC_D8 */\
- MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /* GPMC_D9 */\
- MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /* GPMC_D10 */\
- MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /* GPMC_D11 */\
- MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /* GPMC_D12 */\
- MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /* GPMC_D13 */\
- MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /* GPMC_D14 */\
- MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /* GPMC_D15 */\
- MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /* GPMC_nCS0 */\
- MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M7)) /* GPMC_nCS1 */\
- MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M7)) /* GPMC_nCS2 */\
- MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M7)) /* GPMC_nCS3 */\
- MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | EN | M7)) /* GPMC_nCS4 */\
- MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | DIS | M7)) /* GPMC_nCS5 */\
- MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M7)) /* GPMC_nCS6 */\
- MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M7)) /* GPMC_nCS7 */\
- MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /* GPMC_CLK */\
- MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /* GPMC_nADV_ALE */\
- MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /* GPMC_nOE */\
- MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /* GPMC_nWE */\
- MUX_VAL(CP(GPMC_NWP), (IDIS | PTU | DIS | M0)) /* GPMC_nWP */\
- MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0)) /* GPMC_nBE0_CLE */\
- MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | DIS | M0)) /* GPMC_nBE1 */\
- MUX_VAL(CP(GPMC_WAIT0), (IEN | PTD | EN | M0)) /* GPMC_WAIT0 */\
- MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /* GPMC_WAIT1 */\
- MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M0)) /* GPMC_WAIT2 */\
- MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /* GPMC_WAIT3 */\
-/* IDCC modem Power On */\
- MUX_VAL(CP(CAM_D11), (IEN | PTU | EN | M4)) /* GPIO_110 */\
- MUX_VAL(CP(CAM_D4), (IEN | PTU | EN | M4)) /* GPIO_103 */\
-/* GPMC CS7 has LAN9211 device */\
- MUX_VAL(CP(GPMC_NCS7), (IDIS | PTU | EN | M0)) /* GPMC_nCS7 */\
- MUX_VAL(CP(MCBSP1_DX), (IEN | PTD | DIS | M4)) /* LAN9221 */\
- MUX_VAL(CP(MCSPI1_CS2), (IEN | PTD | EN | M0)) /* MCSPI1_CS2 */\
-/* GPMC CS3 has Serial TL16CP754C device */\
- MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) /* GPMC_nCS3 */\
-/* Toggle Reset pin of TL16CP754C device */\
- MUX_VAL(CP(MCBSP4_CLKX), (IEN | PTU | EN | M4)) /* GPIO_152 */\
- udelay(10);\
- MUX_VAL(CP(MCBSP4_CLKX), (IEN | PTD | EN | M4)) /* GPIO_152 */\
- MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /* SDRC_CKE1 */\
-/* LEDS */\
- MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | EN | M4)) /* GPIO_173 red */\
- MUX_VAL(CP(MCBSP4_DX), (IEN | PTD | EN | M4)) /* GPIO_154 blue */\
- MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | EN | M4)) /* GPIO_61 blue2 */
-
-#endif /* _BOARD_ZOOM2_H_ */
diff --git a/board/logicpd/zoom2/zoom2_serial.c b/board/logicpd/zoom2/zoom2_serial.c
deleted file mode 100644
index 2959276..0000000
--- a/board/logicpd/zoom2/zoom2_serial.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * Copyright (c) 2009 Wind River Systems, Inc.
- * Tom Rix <Tom.Rix@windriver.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * This file was adapted from arch/powerpc/cpu/mpc5xxx/serial.c
- */
-
-#include <common.h>
-#include <serial.h>
-#include <ns16550.h>
-#include <asm/arch/cpu.h>
-#include "zoom2_serial.h"
-
-int quad_init_dev (unsigned long base)
-{
- /*
- * The Quad UART is on the debug board.
- * Check if the debug board is attached before using the UART
- */
- if (zoom2_debug_board_connected ()) {
- NS16550_t com_port = (NS16550_t) base;
- int baud_divisor = CONFIG_SYS_NS16550_CLK / 16 /
- CONFIG_BAUDRATE;
-
- /*
- * Zoom2 has a board specific initialization of its UART.
- * This generic initialization has been copied from
- * drivers/serial/ns16550.c. The macros have been expanded.
- *
- * Do the following instead of
- *
- * NS16550_init (com_port, clock_divisor);
- */
- com_port->ier = 0x00;
-
- /*
- * On Zoom2 board Set pre-scalar to 1
- * CLKSEL is GND => MCR[7] is 1 => preslr is 4
- * So change the prescl to 1
- */
- com_port->lcr = 0xBF;
- com_port->fcr |= 0x10;
- com_port->mcr &= 0x7F;
-
- /* This is generic ns16550.c setup */
- com_port->lcr = UART_LCR_BKSE | UART_LCR_8N1;
- com_port->dll = 0;
- com_port->dlm = 0;
- com_port->lcr = UART_LCR_8N1;
- com_port->mcr = UART_MCR_DTR | UART_MCR_RTS;
- com_port->fcr = UART_FCR_FIFO_EN | UART_FCR_RXSR |
- UART_FCR_TXSR;
- com_port->lcr = UART_LCR_BKSE | UART_LCR_8N1;
- com_port->dll = baud_divisor & 0xff;
- com_port->dlm = (baud_divisor >> 8) & 0xff;
- com_port->lcr = UART_LCR_8N1;
- }
- /*
- * We have to lie here, otherwise the board init code will hang
- * on the check
- */
- return 0;
-}
-
-void quad_putc_dev (unsigned long base, const char c)
-{
- if (zoom2_debug_board_connected ()) {
-
- if (c == '\n')
- quad_putc_dev (base, '\r');
-
- NS16550_putc ((NS16550_t) base, c);
- } else {
- usbtty_putc(c);
- }
-}
-
-void quad_puts_dev (unsigned long base, const char *s)
-{
- if (zoom2_debug_board_connected ()) {
- while ((s != NULL) && (*s != '\0'))
- quad_putc_dev (base, *s++);
- } else {
- usbtty_puts(s);
- }
-}
-
-int quad_getc_dev (unsigned long base)
-{
- if (zoom2_debug_board_connected ())
- return NS16550_getc ((NS16550_t) base);
-
- return usbtty_getc();
-}
-
-int quad_tstc_dev (unsigned long base)
-{
- if (zoom2_debug_board_connected ())
- return NS16550_tstc ((NS16550_t) base);
-
- return usbtty_tstc();
-}
-
-void quad_setbrg_dev (unsigned long base)
-{
- if (zoom2_debug_board_connected ()) {
-
- int clock_divisor = CONFIG_SYS_NS16550_CLK / 16 /
- CONFIG_BAUDRATE;
-
- NS16550_reinit ((NS16550_t) base, clock_divisor);
- }
-}
-
-QUAD_INIT (0)
-QUAD_INIT (1)
-QUAD_INIT (2)
-QUAD_INIT (3)
-
-struct serial_device *default_serial_console(void)
-{
- switch (ZOOM2_DEFAULT_SERIAL_DEVICE) {
- case 0: return &zoom2_serial_device0;
- case 1: return &zoom2_serial_device1;
- case 2: return &zoom2_serial_device2;
- case 3: return &zoom2_serial_device3;
- }
-}
diff --git a/board/logicpd/zoom2/zoom2_serial.h b/board/logicpd/zoom2/zoom2_serial.h
deleted file mode 100644
index 8224452..0000000
--- a/board/logicpd/zoom2/zoom2_serial.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright (c) 2009 Wind River Systems, Inc.
- * Tom Rix <Tom.Rix@windriver.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef ZOOM2_SERIAL_H
-#define ZOOM2_SERIAL_H
-
-#include <linux/stringify.h>
-
-extern int zoom2_debug_board_connected (void);
-
-#define SERIAL_TL16CP754C_BASE 0x10000000 /* Zoom2 Serial chip address */
-
-#define QUAD_BASE_0 SERIAL_TL16CP754C_BASE
-#define QUAD_BASE_1 (SERIAL_TL16CP754C_BASE + 0x100)
-#define QUAD_BASE_2 (SERIAL_TL16CP754C_BASE + 0x200)
-#define QUAD_BASE_3 (SERIAL_TL16CP754C_BASE + 0x300)
-
-#define QUAD_INIT(n) \
-int quad_init_##n(void) \
-{ \
- return quad_init_dev(QUAD_BASE_##n); \
-} \
-void quad_setbrg_##n(void) \
-{ \
- quad_setbrg_dev(QUAD_BASE_##n); \
-} \
-void quad_putc_##n(const char c) \
-{ \
- quad_putc_dev(QUAD_BASE_##n, c); \
-} \
-void quad_puts_##n(const char *s) \
-{ \
- quad_puts_dev(QUAD_BASE_##n, s); \
-} \
-int quad_getc_##n(void) \
-{ \
- return quad_getc_dev(QUAD_BASE_##n); \
-} \
-int quad_tstc_##n(void) \
-{ \
- return quad_tstc_dev(QUAD_BASE_##n); \
-} \
-struct serial_device zoom2_serial_device##n = \
-{ \
- .name = __stringify(n), \
- .start = quad_init_##n, \
- .stop = NULL, \
- .setbrg = quad_setbrg_##n, \
- .getc = quad_getc_##n, \
- .tstc = quad_tstc_##n, \
- .putc = quad_putc_##n, \
- .puts = quad_puts_##n, \
-};
-
-#endif /* ZOOM2_SERIAL_H */
diff --git a/board/mx1ads/Makefile b/board/mx1ads/Makefile
deleted file mode 100644
index 6dfd18e..0000000
--- a/board/mx1ads/Makefile
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# board/mx1ads/Makefile
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (c) Copyright 2004
-# Techware Information Technology, Inc.
-# http://www.techware.com.tw/
-#
-# Ming-Len Wu <minglen_wu@techware.com.tw>
-#
-# SPDX-License-Identifier: GPL-2.0+
-
-obj-y := mx1ads.o syncflash.o
-obj-y += lowlevel_init.o
diff --git a/board/mx1ads/lowlevel_init.S b/board/mx1ads/lowlevel_init.S
deleted file mode 100644
index d1e472a..0000000
--- a/board/mx1ads/lowlevel_init.S
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * board/mx1ads/lowlevel_init.S
- *
- * (c) Copyright 2004
- * Techware Information Technology, Inc.
- * http://www.techware.com.tw/
- *
- * Ming-Len Wu <minglen_wu@techware.com.tw>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <config.h>
-#include <version.h>
-
-#define SDCTL0 0x221000
-#define SDCTL1 0x221004
-
-
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE
-
-.globl lowlevel_init
-lowlevel_init:
-/* memory controller init */
-
- ldr r1, =SDCTL0
-
-/* Set Precharge Command */
-
- ldr r3, =0x92120200
-/* ldr r3, =0x92120251
-*/
- str r3, [r1]
-
-/* Issue Precharge All Commad */
- ldr r3, =0x8200000
- ldr r2, [r3]
-
-/* Set AutoRefresh Command */
- ldr r3, =0xA2120200
- str r3, [r1]
-
-/* Issue AutoRefresh Command */
- ldr r3, =0x8000000
- ldr r2, [r3]
- ldr r2, [r3]
- ldr r2, [r3]
- ldr r2, [r3]
- ldr r2, [r3]
- ldr r2, [r3]
- ldr r2, [r3]
- ldr r2, [r3]
-
-/* Set Mode Register */
- ldr r3, =0xB2120200
- str r3, [r1]
-
-/* Issue Mode Register Command */
- ldr r3, =0x08111800 /* Mode Register Value */
- ldr r2, [r3]
-
-/* Set Normal Mode */
- ldr r3, =0x82124200
- str r3, [r1]
-
-/* everything is fine now */
- mov pc, lr
diff --git a/board/mx1ads/mx1ads.c b/board/mx1ads/mx1ads.c
deleted file mode 100644
index 4266048..0000000
--- a/board/mx1ads/mx1ads.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * board/mx1ads/mx1ads.c
- *
- * (c) Copyright 2004
- * Techware Information Technology, Inc.
- * http://www.techware.com.tw/
- *
- * Ming-Len Wu <minglen_wu@techware.com.tw>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-/*#include <mc9328.h>*/
-#include <asm/arch/imx-regs.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define FCLK_SPEED 1
-
-#if FCLK_SPEED==0 /* Fout = 203MHz, Fin = 12MHz for Audio */
-#define M_MDIV 0xC3
-#define M_PDIV 0x4
-#define M_SDIV 0x1
-#elif FCLK_SPEED==1 /* Fout = 202.8MHz */
-#define M_MDIV 0xA1
-#define M_PDIV 0x3
-#define M_SDIV 0x1
-#endif
-
-#define USB_CLOCK 1
-
-#if USB_CLOCK==0
-#define U_M_MDIV 0xA1
-#define U_M_PDIV 0x3
-#define U_M_SDIV 0x1
-#elif USB_CLOCK==1
-#define U_M_MDIV 0x48
-#define U_M_PDIV 0x3
-#define U_M_SDIV 0x2
-#endif
-
-#if 0
-
-static inline void delay (unsigned long loops)
-{
- __asm__ volatile ("1:\n"
- "subs %0, %1, #1\n"
- "bne 1b":"=r" (loops):"0" (loops));
-}
-
-#endif
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-void SetAsynchMode (void)
-{
- __asm__ ("mrc p15,0,r0,c1,c0,0 \n"
- "mov r2, #0xC0000000 \n"
- "orr r0,r2,r0 \n" "mcr p15,0,r0,c1,c0,0 \n");
-}
-
-static u32 mc9328sid;
-
-int board_early_init_f(void)
-{
- mc9328sid = SIDR;
-
- GPCR = 0x000003AB; /* I/O pad driving strength */
-
- /* MX1_CS1U = 0x00000A00; */ /* SRAM initialization */
-/* MX1_CS1L = 0x11110601; */
-
- MPCTL0 = 0x04632410; /* setting for 150 MHz MCU PLL CLK */
-
-/* set FCLK divider 1 (i.e. FCLK to MCU PLL CLK) and
- * BCLK divider to 2 (i.e. BCLK to 48 MHz)
- */
- CSCR = 0xAF000403;
-
- CSCR |= 0x00200000; /* Trigger the restart bit(bit 21) */
- CSCR &= 0xFFFF7FFF; /* Program PRESC bit(bit 15) to 0 to divide-by-1 */
-
-/* setup cs4 for cs8900 ethernet */
-
- CS4U = 0x00000F00; /* Initialize CS4 for CS8900 ethernet */
- CS4L = 0x00001501;
-
- GIUS (0) &= 0xFF3FFFFF;
- GPR (0) &= 0xFF3FFFFF;
-
- readl(0x1500000C);
- readl(0x1500000C);
-
- SetAsynchMode ();
-
- icache_enable ();
- dcache_enable ();
-
-/* set PERCLKs */
- PCDR = 0x00000055; /* set PERCLKS */
-
-/* PERCLK3 is only used by SSI so the SSI driver can set it any value it likes
- * PERCLK1 and PERCLK2 are shared so DO NOT change it in any other place
- * all sources selected as normal interrupt
- */
-
-/* MX1_INTTYPEH = 0;
- MX1_INTTYPEL = 0;
-*/
- return 0;
-}
-
-int board_init(void)
-{
- gd->bd->bi_arch_number = MACH_TYPE_MX1ADS;
-
- gd->bd->bi_boot_params = 0x08000100; /* adress of boot parameters */
-
- return 0;
-}
-
-int board_late_init (void)
-{
-
- setenv ("stdout", "serial");
- setenv ("stderr", "serial");
-
- switch (mc9328sid) {
- case 0x0005901d:
- printf ("MX1ADS board with MC9328 MX1 (0L44N), Silicon ID 0x%08x \n\n",
- mc9328sid);
- break;
- case 0x04d4c01d:
- printf ("MX1ADS board with MC9328 MXL (1L45N), Silicon ID 0x%08x \n\n",
- mc9328sid);
- break;
- case 0x00d4c01d:
- printf ("MX1ADS board with MC9328 MXL (2L45N), Silicon ID 0x%08x \n\n",
- mc9328sid);
- break;
-
- default:
- printf ("MX1ADS board with UNKNOWN MC9328 cpu, Silicon ID 0x%08x \n",
- mc9328sid);
- break;
- }
- return 0;
-}
-
-int dram_init(void)
-{
- /* dram_init must store complete ramsize in gd->ram_size */
- gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1,
- PHYS_SDRAM_1_SIZE);
- return 0;
-}
-
-void dram_init_banksize(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_CS8900
- rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/mx1ads/syncflash.c b/board/mx1ads/syncflash.c
deleted file mode 100644
index 5d68533..0000000
--- a/board/mx1ads/syncflash.c
+++ /dev/null
@@ -1,307 +0,0 @@
-/*
- * board/mx1ads/syncflash.c
- *
- * (c) Copyright 2004
- * Techware Information Technology, Inc.
- * http://www.techware.com.tw/
- *
- * Ming-Len Wu <minglen_wu@techware.com.tw>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-/*#include <mc9328.h>*/
-#include <asm/arch/imx-regs.h>
-
-typedef unsigned long * p_u32;
-
-/* 4Mx16x2 IAM=0 CSD1 */
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/* Following Setting is for CSD1 */
-#define SFCTL 0x00221004
-#define reg_SFCTL __REG(SFCTL)
-
-#define SYNCFLASH_A10 (0x00100000)
-
-#define CMD_NORMAL (0x81020300) /* Normal Mode */
-#define CMD_PREC (CMD_NORMAL + 0x10000000) /* Precharge Command */
-#define CMD_AUTO (CMD_NORMAL + 0x20000000) /* Auto Refresh Command */
-#define CMD_LMR (CMD_NORMAL + 0x30000000) /* Load Mode Register Command */
-#define CMD_LCR (CMD_NORMAL + 0x60000000) /* LCR Command */
-#define CMD_PROGRAM (CMD_NORMAL + 0x70000000)
-
-#define MODE_REG_VAL (CONFIG_SYS_FLASH_BASE+0x0008CC00) /* Cas Latency 3 */
-
-/* LCR Command */
-#define LCR_READSTATUS (0x0001C000) /* 0x70 */
-#define LCR_ERASE_CONFIRM (0x00008000) /* 0x20 */
-#define LCR_ERASE_NVMODE (0x0000C000) /* 0x30 */
-#define LCR_PROG_NVMODE (0x00028000) /* 0xA0 */
-#define LCR_SR_CLEAR (0x00014000) /* 0x50 */
-
-/* Get Status register */
-u32 SF_SR(void) {
- u32 tmp;
-
- reg_SFCTL = CMD_PROGRAM;
- tmp = __REG(CONFIG_SYS_FLASH_BASE);
-
- reg_SFCTL = CMD_NORMAL;
-
- reg_SFCTL = CMD_LCR; /* Activate LCR Mode */
- __REG(CONFIG_SYS_FLASH_BASE + LCR_SR_CLEAR);
-
- return tmp;
-}
-
-/* check if SyncFlash is ready */
-u8 SF_Ready(void) {
- u32 tmp;
-
- tmp = SF_SR();
-
- if ((tmp & 0x00800000) && (tmp & 0x001C0000)) {
- printf ("SyncFlash Error code %08x\n",tmp);
- };
-
- if ((tmp & 0x00000080) && (tmp & 0x0000001C)) {
- printf ("SyncFlash Error code %08x\n",tmp);
- };
-
- if (tmp == 0x00800080) /* Test Bit 7 of SR */
- return 1;
- else
- return 0;
-}
-
-/* Issue the precharge all command */
-void SF_PrechargeAll(void) {
-
- /* Set Precharge Command */
- reg_SFCTL = CMD_PREC;
- /* Issue Precharge All Command */
- __REG(CONFIG_SYS_FLASH_BASE + SYNCFLASH_A10);
-}
-
-/* set SyncFlash to normal mode */
-void SF_Normal(void) {
-
- SF_PrechargeAll();
-
- reg_SFCTL = CMD_NORMAL;
-}
-
-/* Erase SyncFlash */
-void SF_Erase(u32 RowAddress) {
-
- reg_SFCTL = CMD_NORMAL;
- __REG(RowAddress);
-
- reg_SFCTL = CMD_PREC;
- __REG(RowAddress);
-
- reg_SFCTL = CMD_LCR; /* Set LCR mode */
- __REG(RowAddress + LCR_ERASE_CONFIRM) = 0; /* Issue Erase Setup Command */
-
- reg_SFCTL = CMD_NORMAL; /* return to Normal mode */
- __REG(RowAddress) = 0xD0D0D0D0; /* Confirm */
-
- while(!SF_Ready());
-}
-
-void SF_NvmodeErase(void) {
- SF_PrechargeAll();
-
- reg_SFCTL = CMD_LCR; /* Set to LCR mode */
- __REG(CONFIG_SYS_FLASH_BASE + LCR_ERASE_NVMODE) = 0; /* Issue Erase Nvmode Reg Command */
-
- reg_SFCTL = CMD_NORMAL; /* Return to Normal mode */
- __REG(CONFIG_SYS_FLASH_BASE + LCR_ERASE_NVMODE) = 0xC0C0C0C0; /* Confirm */
-
- while(!SF_Ready());
-}
-
-void SF_NvmodeWrite(void) {
- SF_PrechargeAll();
-
- reg_SFCTL = CMD_LCR; /* Set to LCR mode */
- __REG(CONFIG_SYS_FLASH_BASE+LCR_PROG_NVMODE) = 0; /* Issue Program Nvmode reg command */
-
- reg_SFCTL = CMD_NORMAL; /* Return to Normal mode */
- __REG(CONFIG_SYS_FLASH_BASE+LCR_PROG_NVMODE) = 0xC0C0C0C0; /* Confirm not needed */
-}
-
-/****************************************************************************************/
-
-ulong flash_init(void) {
- int i, j;
-
-/* Turn on CSD1 for negating RESETSF of SyncFLash */
-
- reg_SFCTL |= 0x80000000; /* enable CSD1 for SyncFlash */
- udelay(200);
-
- reg_SFCTL = CMD_LMR; /* Set Load Mode Register Command */
- __REG(MODE_REG_VAL); /* Issue Load Mode Register Command */
-
- SF_Normal();
-
- i = 0;
-
- flash_info[i].flash_id = FLASH_MAN_MT | FLASH_MT28S4M16LC;
-
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-
- memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
-
- for (j = 0; j < flash_info[i].sector_count; j++) {
- flash_info[i].start[j] = CONFIG_SYS_FLASH_BASE + j * 0x00100000;
- }
-
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
- &flash_info[0]);
-
- return FLASH_BANK_SIZE;
-}
-
-void flash_print_info (flash_info_t *info) {
-
- int i;
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case (FLASH_MAN_MT & FLASH_VENDMASK):
- printf("Micron: ");
- break;
- default:
- printf("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case (FLASH_MT28S4M16LC & FLASH_TYPEMASK):
- printf("2x FLASH_MT28S4M16LC (16MB Total)\n");
- break;
- default:
- printf("Unknown Chip Type\n");
- return;
- break;
- }
-
- printf(" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf(" Sector Start Addresses: ");
-
- for (i = 0; i < info->sector_count; i++) {
- if ((i % 5) == 0)
- printf ("\n ");
-
- printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
-
- printf ("\n");
-}
-
-/*-----------------------------------------------------------------------*/
-
-int flash_erase (flash_info_t *info, int s_first, int s_last) {
- int iflag, cflag, prot, sect;
- int rc = ERR_OK;
-
-/* first look for protection bits */
-
- if (info->flash_id == FLASH_UNKNOWN)
- return ERR_UNKNOWN_FLASH_TYPE;
-
- if ((s_first < 0) || (s_first > s_last))
- return ERR_INVAL;
-
- if ((info->flash_id & FLASH_VENDMASK) != (FLASH_MAN_MT & FLASH_VENDMASK))
- return ERR_UNKNOWN_FLASH_VENDOR;
-
- prot = 0;
-
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect])
- prot++;
- }
-
- if (prot) {
- printf("protected!\n");
- return ERR_PROTECTED;
- }
-/*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
-
- cflag = icache_status();
- icache_disable();
- iflag = disable_interrupts();
-
-/* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last && !ctrlc(); sect++) {
-
- printf("Erasing sector %2d ... ", sect);
-
-/* arm simple, non interrupt dependent timer */
-
- get_timer(0);
-
- SF_NvmodeErase();
- SF_NvmodeWrite();
-
- SF_Erase(CONFIG_SYS_FLASH_BASE + (0x0100000 * sect));
- SF_Normal();
-
- printf("ok.\n");
- }
-
- if (ctrlc())
- printf("User Interrupt!\n");
-
- if (iflag)
- enable_interrupts();
-
- if (cflag)
- icache_enable();
-
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) {
- int i;
-
- for(i = 0; i < cnt; i += 4) {
-
- SF_PrechargeAll();
-
- reg_SFCTL = CMD_PROGRAM; /* Enter SyncFlash Program mode */
- __REG(addr + i) = __REG((u32)src + i);
-
- while(!SF_Ready());
- }
-
- SF_Normal();
-
- return ERR_OK;
-}
diff --git a/board/renesas/sh7753evb/Makefile b/board/renesas/sh7753evb/Makefile
new file mode 100644
index 0000000..f7c8e94
--- /dev/null
+++ b/board/renesas/sh7753evb/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2012 Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-y := sh7753evb.o spi-boot.o
+obj-y += lowlevel_init.o
diff --git a/board/renesas/sh7753evb/lowlevel_init.S b/board/renesas/sh7753evb/lowlevel_init.S
new file mode 100644
index 0000000..21987a5
--- /dev/null
+++ b/board/renesas/sh7753evb/lowlevel_init.S
@@ -0,0 +1,416 @@
+/*
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/processor.h>
+#include <asm/macro.h>
+
+.macro or32, addr, data
+ mov.l \addr, r1
+ mov.l \data, r0
+ mov.l @r1, r2
+ or r2, r0
+ mov.l r0, @r1
+.endm
+
+.macro wait_DBCMD
+ mov.l DBWAIT_A, r0
+ mov.l @r0, r1
+.endm
+
+ .global lowlevel_init
+ .section .spiboot1.text
+ .align 2
+
+lowlevel_init:
+ mov #0, r14
+ mova 2f, r0
+ mov.l PC_MASK, r1
+ tst r0, r1
+ bf 2f
+
+ bra exit_pmb
+ nop
+
+ .align 2
+
+/* If CPU runs on SDRAM (PC=0x5???????) or not. */
+PC_MASK: .long 0x20000000
+
+2:
+ mov #1, r14
+
+ mov.l EXPEVT_A, r0
+ mov.l @r0, r0
+ mov.l EXPEVT_POWER_ON_RESET, r1
+ cmp/eq r0, r1
+ bt 1f
+
+ /*
+ * If EXPEVT value is manual reset or tlb multipul-hit,
+ * initialization of DBSC3 is not necessary.
+ */
+ bra exit_ddr
+ nop
+
+1:
+ /*------- Reset -------*/
+ write32 MRSTCR0_A, MRSTCR0_D
+ write32 MRSTCR1_A, MRSTCR1_D
+
+ /* For Core Reset */
+ mov.l DBACEN_A, r0
+ mov.l @r0, r0
+ cmp/eq #0, r0
+ bt 3f
+
+ /*
+ * If DBACEN == 1(DBSC was already enabled), we have to avoid the
+ * initialization of DDR3-SDRAM.
+ */
+ bra exit_ddr
+ nop
+
+3:
+ /*------- DBSC3 -------*/
+ /* oscillation stabilization time */
+ wait_timer WAIT_OSC_TIME
+
+ /* step 3 */
+ write32 DBKIND_A, DBKIND_D
+
+ /* step 4 */
+ write32 DBCONF_A, DBCONF_D
+ write32 DBTR0_A, DBTR0_D
+ write32 DBTR1_A, DBTR1_D
+ write32 DBTR2_A, DBTR2_D
+ write32 DBTR3_A, DBTR3_D
+ write32 DBTR4_A, DBTR4_D
+ write32 DBTR5_A, DBTR5_D
+ write32 DBTR6_A, DBTR6_D
+ write32 DBTR7_A, DBTR7_D
+ write32 DBTR8_A, DBTR8_D
+ write32 DBTR9_A, DBTR9_D
+ write32 DBTR10_A, DBTR10_D
+ write32 DBTR11_A, DBTR11_D
+ write32 DBTR12_A, DBTR12_D
+ write32 DBTR13_A, DBTR13_D
+ write32 DBTR14_A, DBTR14_D
+ write32 DBTR15_A, DBTR15_D
+ write32 DBTR16_A, DBTR16_D
+ write32 DBTR17_A, DBTR17_D
+ write32 DBTR18_A, DBTR18_D
+ write32 DBTR19_A, DBTR19_D
+ write32 DBRNK0_A, DBRNK0_D
+ write32 DBADJ0_A, DBADJ0_D
+ write32 DBADJ2_A, DBADJ2_D
+
+ /* step 5 */
+ write32 DBCMD_A, DBCMD_RSTL_VAL
+ wait_timer WAIT_30US
+
+ /* step 6 */
+ write32 DBCMD_A, DBCMD_PDEN_VAL
+
+ /* step 7 */
+ write32 DBPDCNT3_A, DBPDCNT3_D
+
+ /* step 8 */
+ write32 DBPDCNT1_A, DBPDCNT1_D
+ write32 DBPDCNT2_A, DBPDCNT2_D
+ write32 DBPDLCK_A, DBPDLCK_D
+ write32 DBPDRGA_A, DBPDRGA_D
+ write32 DBPDRGD_A, DBPDRGD_D
+
+ /* step 9 */
+ wait_timer WAIT_30US
+
+ /* step 10 */
+ write32 DBPDCNT0_A, DBPDCNT0_D
+
+ /* step 11 */
+ wait_timer WAIT_30US
+ wait_timer WAIT_30US
+
+ /* step 12 */
+ write32 DBCMD_A, DBCMD_WAIT_VAL
+ wait_DBCMD
+
+ /* step 13 */
+ write32 DBCMD_A, DBCMD_RSTH_VAL
+ wait_DBCMD
+
+ /* step 14 */
+ write32 DBCMD_A, DBCMD_WAIT_VAL
+ write32 DBCMD_A, DBCMD_WAIT_VAL
+ write32 DBCMD_A, DBCMD_WAIT_VAL
+ write32 DBCMD_A, DBCMD_WAIT_VAL
+
+ /* step 15 */
+ write32 DBCMD_A, DBCMD_PDXT_VAL
+
+ /* step 16 */
+ write32 DBCMD_A, DBCMD_MRS2_VAL
+
+ /* step 17 */
+ write32 DBCMD_A, DBCMD_MRS3_VAL
+
+ /* step 18 */
+ write32 DBCMD_A, DBCMD_MRS1_VAL
+
+ /* step 19 */
+ write32 DBCMD_A, DBCMD_MRS0_VAL
+ write32 DBPDNCNF_A, DBPDNCNF_D
+
+ /* step 20 */
+ write32 DBCMD_A, DBCMD_ZQCL_VAL
+
+ write32 DBCMD_A, DBCMD_REF_VAL
+ write32 DBCMD_A, DBCMD_REF_VAL
+ wait_DBCMD
+
+ /* step 21 */
+ write32 DBCALTR_A, DBCALTR_D
+
+ /* step 22 */
+ write32 DBRFCNF0_A, DBRFCNF0_D
+ write32 DBRFCNF1_A, DBRFCNF1_D
+ write32 DBRFCNF2_A, DBRFCNF2_D
+
+ /* step 23 */
+ write32 DBCALCNF_A, DBCALCNF_D
+
+ /* step 24 */
+ write32 DBRFEN_A, DBRFEN_D
+ write32 DBCMD_A, DBCMD_SRXT_VAL
+
+ /* step 25 */
+ write32 DBACEN_A, DBACEN_D
+
+ /* step 26 */
+ wait_DBCMD
+
+ bra exit_ddr
+ nop
+
+ .align 2
+
+EXPEVT_A: .long 0xff000024
+EXPEVT_POWER_ON_RESET: .long 0x00000000
+
+/*------- Reset -------*/
+MRSTCR0_A: .long 0xffd50030
+MRSTCR0_D: .long 0xfe1ffe7f
+MRSTCR1_A: .long 0xffd50034
+MRSTCR1_D: .long 0xfff3ffff
+
+/*------- DBSC3 -------*/
+DBCMD_A: .long 0xfe800018
+DBKIND_A: .long 0xfe800020
+DBCONF_A: .long 0xfe800024
+DBTR0_A: .long 0xfe800040
+DBTR1_A: .long 0xfe800044
+DBTR2_A: .long 0xfe800048
+DBTR3_A: .long 0xfe800050
+DBTR4_A: .long 0xfe800054
+DBTR5_A: .long 0xfe800058
+DBTR6_A: .long 0xfe80005c
+DBTR7_A: .long 0xfe800060
+DBTR8_A: .long 0xfe800064
+DBTR9_A: .long 0xfe800068
+DBTR10_A: .long 0xfe80006c
+DBTR11_A: .long 0xfe800070
+DBTR12_A: .long 0xfe800074
+DBTR13_A: .long 0xfe800078
+DBTR14_A: .long 0xfe80007c
+DBTR15_A: .long 0xfe800080
+DBTR16_A: .long 0xfe800084
+DBTR17_A: .long 0xfe800088
+DBTR18_A: .long 0xfe80008c
+DBTR19_A: .long 0xfe800090
+DBRNK0_A: .long 0xfe800100
+DBPDCNT0_A: .long 0xfe800200
+DBPDCNT1_A: .long 0xfe800204
+DBPDCNT2_A: .long 0xfe800208
+DBPDCNT3_A: .long 0xfe80020c
+DBPDLCK_A: .long 0xfe800280
+DBPDRGA_A: .long 0xfe800290
+DBPDRGD_A: .long 0xfe8002a0
+DBADJ0_A: .long 0xfe8000c0
+DBADJ2_A: .long 0xfe8000c8
+DBRFCNF0_A: .long 0xfe8000e0
+DBRFCNF1_A: .long 0xfe8000e4
+DBRFCNF2_A: .long 0xfe8000e8
+DBCALCNF_A: .long 0xfe8000f4
+DBRFEN_A: .long 0xfe800014
+DBACEN_A: .long 0xfe800010
+DBWAIT_A: .long 0xfe80001c
+DBCALTR_A: .long 0xfe8000f8
+DBPDNCNF_A: .long 0xfe800180
+
+WAIT_OSC_TIME: .long 6000
+WAIT_30US: .long 13333
+
+DBCMD_RSTL_VAL: .long 0x20000000
+DBCMD_PDEN_VAL: .long 0x1000d73c
+DBCMD_WAIT_VAL: .long 0x0000d73c
+DBCMD_RSTH_VAL: .long 0x2100d73c
+DBCMD_PDXT_VAL: .long 0x110000c8
+DBCMD_MRS0_VAL: .long 0x28000930
+DBCMD_MRS1_VAL: .long 0x29000004
+DBCMD_MRS2_VAL: .long 0x2a000008
+DBCMD_MRS3_VAL: .long 0x2b000000
+DBCMD_ZQCL_VAL: .long 0x03000200
+DBCMD_REF_VAL: .long 0x0c000000
+DBCMD_SRXT_VAL: .long 0x19000000
+DBKIND_D: .long 0x00000007
+DBCONF_D: .long 0x0f030a01
+DBTR0_D: .long 0x00000007
+DBTR1_D: .long 0x00000006
+DBTR2_D: .long 0x00000000
+DBTR3_D: .long 0x00000007
+DBTR4_D: .long 0x00070007
+DBTR5_D: .long 0x0000001b
+DBTR6_D: .long 0x00000014
+DBTR7_D: .long 0x00000004
+DBTR8_D: .long 0x00000014
+DBTR9_D: .long 0x00000004
+DBTR10_D: .long 0x00000008
+DBTR11_D: .long 0x00000007
+DBTR12_D: .long 0x0000000e
+DBTR13_D: .long 0x000000a0
+DBTR14_D: .long 0x00060006
+DBTR15_D: .long 0x00000003
+DBTR16_D: .long 0x00160002
+DBTR17_D: .long 0x000c0000
+DBTR18_D: .long 0x00000200
+DBTR19_D: .long 0x00000040
+DBRNK0_D: .long 0x00000001
+DBPDCNT0_D: .long 0x00000001
+DBPDCNT1_D: .long 0x00000001
+DBPDCNT2_D: .long 0x00000000
+DBPDCNT3_D: .long 0x00004010
+DBPDLCK_D: .long 0x0000a55a
+DBPDRGA_D: .long 0x00000028
+DBPDRGD_D: .long 0x00017100
+
+DBADJ0_D: .long 0x00010000
+DBADJ2_D: .long 0x18061806
+DBRFCNF0_D: .long 0x000001ff
+DBRFCNF1_D: .long 0x00081040
+DBRFCNF2_D: .long 0x00000000
+DBCALCNF_D: .long 0x0000ffff
+DBRFEN_D: .long 0x00000001
+DBACEN_D: .long 0x00000001
+DBCALTR_D: .long 0x08200820
+DBPDNCNF_D: .long 0x00000001
+
+ .align 2
+exit_ddr:
+#if defined(CONFIG_SH_32BIT)
+ /*------- set PMB -------*/
+ write32 PASCR_A, PASCR_29BIT_D
+ write32 MMUCR_A, MMUCR_D
+
+ /*****************************************************************
+ * ent virt phys v sz c wt
+ * 0 0xa0000000 0x00000000 1 128M 0 1
+ * 1 0xa8000000 0x48000000 1 128M 0 1
+ * 5 0x88000000 0x48000000 1 128M 1 1
+ */
+ write32 PMB_ADDR_SPIBOOT_A, PMB_ADDR_SPIBOOT_D
+ write32 PMB_DATA_SPIBOOT_A, PMB_DATA_SPIBOOT_D
+ write32 PMB_ADDR_DDR_C1_A, PMB_ADDR_DDR_C1_D
+ write32 PMB_DATA_DDR_C1_A, PMB_DATA_DDR_C1_D
+ write32 PMB_ADDR_DDR_N1_A, PMB_ADDR_DDR_N1_D
+ write32 PMB_DATA_DDR_N1_A, PMB_DATA_DDR_N1_D
+
+ write32 PMB_ADDR_ENTRY2, PMB_ADDR_NOT_USE_D
+ write32 PMB_ADDR_ENTRY3, PMB_ADDR_NOT_USE_D
+ write32 PMB_ADDR_ENTRY4, PMB_ADDR_NOT_USE_D
+ write32 PMB_ADDR_ENTRY6, PMB_ADDR_NOT_USE_D
+ write32 PMB_ADDR_ENTRY7, PMB_ADDR_NOT_USE_D
+ write32 PMB_ADDR_ENTRY8, PMB_ADDR_NOT_USE_D
+ write32 PMB_ADDR_ENTRY9, PMB_ADDR_NOT_USE_D
+ write32 PMB_ADDR_ENTRY10, PMB_ADDR_NOT_USE_D
+ write32 PMB_ADDR_ENTRY11, PMB_ADDR_NOT_USE_D
+ write32 PMB_ADDR_ENTRY12, PMB_ADDR_NOT_USE_D
+ write32 PMB_ADDR_ENTRY13, PMB_ADDR_NOT_USE_D
+ write32 PMB_ADDR_ENTRY14, PMB_ADDR_NOT_USE_D
+ write32 PMB_ADDR_ENTRY15, PMB_ADDR_NOT_USE_D
+
+ write32 PASCR_A, PASCR_INIT
+ mov.l DUMMY_ADDR, r0
+ icbi @r0
+#endif /* if defined(CONFIG_SH_32BIT) */
+
+exit_pmb:
+ /* CPU is running on ILRAM? */
+ mov r14, r0
+ tst #1, r0
+ bt 1f
+
+ mov.l _stack_ilram, r15
+ mov.l _spiboot_main, r0
+100: bsrf r0
+ nop
+
+ .align 2
+_spiboot_main: .long (spiboot_main - (100b + 4))
+_stack_ilram: .long 0xe5204000
+
+1:
+ write32 CCR_A, CCR_D
+
+ rts
+ nop
+
+ .align 2
+
+#if defined(CONFIG_SH_32BIT)
+/*------- set PMB -------*/
+PMB_ADDR_SPIBOOT_A: .long PMB_ADDR_BASE(0)
+PMB_ADDR_DDR_N1_A: .long PMB_ADDR_BASE(1)
+PMB_ADDR_DDR_C1_A: .long PMB_ADDR_BASE(5)
+PMB_ADDR_ENTRY2: .long PMB_ADDR_BASE(2)
+PMB_ADDR_ENTRY3: .long PMB_ADDR_BASE(3)
+PMB_ADDR_ENTRY4: .long PMB_ADDR_BASE(4)
+PMB_ADDR_ENTRY6: .long PMB_ADDR_BASE(6)
+PMB_ADDR_ENTRY7: .long PMB_ADDR_BASE(7)
+PMB_ADDR_ENTRY8: .long PMB_ADDR_BASE(8)
+PMB_ADDR_ENTRY9: .long PMB_ADDR_BASE(9)
+PMB_ADDR_ENTRY10: .long PMB_ADDR_BASE(10)
+PMB_ADDR_ENTRY11: .long PMB_ADDR_BASE(11)
+PMB_ADDR_ENTRY12: .long PMB_ADDR_BASE(12)
+PMB_ADDR_ENTRY13: .long PMB_ADDR_BASE(13)
+PMB_ADDR_ENTRY14: .long PMB_ADDR_BASE(14)
+PMB_ADDR_ENTRY15: .long PMB_ADDR_BASE(15)
+
+PMB_ADDR_SPIBOOT_D: .long mk_pmb_addr_val(0xa0)
+PMB_ADDR_DDR_C1_D: .long mk_pmb_addr_val(0x88)
+PMB_ADDR_DDR_N1_D: .long mk_pmb_addr_val(0xa8)
+PMB_ADDR_NOT_USE_D: .long 0x00000000
+
+PMB_DATA_SPIBOOT_A: .long PMB_DATA_BASE(0)
+PMB_DATA_DDR_N1_A: .long PMB_DATA_BASE(1)
+PMB_DATA_DDR_C1_A: .long PMB_DATA_BASE(5)
+
+/* ppn ub v s1 s0 c wt */
+PMB_DATA_SPIBOOT_D: .long mk_pmb_data_val(0x00, 0, 1, 1, 0, 0, 1)
+PMB_DATA_DDR_C1_D: .long mk_pmb_data_val(0x48, 0, 1, 1, 0, 1, 1)
+PMB_DATA_DDR_N1_D: .long mk_pmb_data_val(0x48, 1, 1, 1, 0, 0, 1)
+
+PASCR_A: .long 0xff000070
+DUMMY_ADDR: .long 0xa0000000
+PASCR_29BIT_D: .long 0x00000000
+PASCR_INIT: .long 0x80000080
+MMUCR_A: .long 0xff000010
+MMUCR_D: .long 0x00000004 /* clear ITLB */
+#endif /* CONFIG_SH_32BIT */
+
+CCR_A: .long CCR
+CCR_D: .long CCR_CACHE_INIT
diff --git a/board/renesas/sh7753evb/sh7753evb.c b/board/renesas/sh7753evb/sh7753evb.c
new file mode 100644
index 0000000..42b920f
--- /dev/null
+++ b/board/renesas/sh7753evb/sh7753evb.c
@@ -0,0 +1,326 @@
+/*
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/mmc.h>
+#include <spi_flash.h>
+
+int checkboard(void)
+{
+ puts("BOARD: SH7753 EVB\n");
+
+ return 0;
+}
+
+static void init_gpio(void)
+{
+ struct gpio_regs *gpio = GPIO_BASE;
+ struct sermux_regs *sermux = SERMUX_BASE;
+
+ /* GPIO */
+ writew(0x0000, &gpio->pacr); /* GETHER */
+ writew(0x0001, &gpio->pbcr); /* INTC */
+ writew(0x0000, &gpio->pccr); /* PWMU, INTC */
+ writew(0x0000, &gpio->pdcr); /* SPI0 */
+ writew(0xeaff, &gpio->pecr); /* GPIO */
+ writew(0x0000, &gpio->pfcr); /* WDT */
+ writew(0x0004, &gpio->pgcr); /* SPI0, GETHER MDIO gate(PTG1) */
+ writew(0x0000, &gpio->phcr); /* SPI1 */
+ writew(0x0000, &gpio->picr); /* SDHI */
+ writew(0x0000, &gpio->pjcr); /* SCIF4 */
+ writew(0x0003, &gpio->pkcr); /* SerMux */
+ writew(0x0000, &gpio->plcr); /* SerMux */
+ writew(0x0000, &gpio->pmcr); /* RIIC */
+ writew(0x0000, &gpio->pncr); /* USB, SGPIO */
+ writew(0x0000, &gpio->pocr); /* SGPIO */
+ writew(0xd555, &gpio->pqcr); /* GPIO */
+ writew(0x0000, &gpio->prcr); /* RIIC */
+ writew(0x0000, &gpio->pscr); /* RIIC */
+ writew(0x0000, &gpio->ptcr); /* STATUS */
+ writeb(0x00, &gpio->pudr);
+ writew(0x5555, &gpio->pucr); /* Debug LED */
+ writew(0x0000, &gpio->pvcr); /* RSPI */
+ writew(0x0000, &gpio->pwcr); /* EVC */
+ writew(0x0000, &gpio->pxcr); /* LBSC */
+ writew(0x0000, &gpio->pycr); /* LBSC */
+ writew(0x0000, &gpio->pzcr); /* eMMC */
+ writew(0xfe00, &gpio->psel0);
+ writew(0x0000, &gpio->psel1);
+ writew(0x3000, &gpio->psel2);
+ writew(0xff00, &gpio->psel3);
+ writew(0x771f, &gpio->psel4);
+ writew(0x0ffc, &gpio->psel5);
+ writew(0x00ff, &gpio->psel6);
+ writew(0xfc00, &gpio->psel7);
+
+ writeb(0x10, &sermux->smr0); /* SMR0: SerMux mode 0 */
+}
+
+static void init_usb_phy(void)
+{
+ struct usb_common_regs *common0 = USB0_COMMON_BASE;
+ struct usb_common_regs *common1 = USB1_COMMON_BASE;
+ struct usb0_phy_regs *phy = USB0_PHY_BASE;
+ struct usb1_port_regs *port = USB1_PORT_BASE;
+ struct usb1_alignment_regs *align = USB1_ALIGNMENT_BASE;
+
+ writew(0x0100, &phy->reset); /* set reset */
+ /* port0 = USB0, port1 = USB1 */
+ writew(0x0002, &phy->portsel);
+ writel(0x0001, &port->port1sel); /* port1 = Host */
+ writew(0x0111, &phy->reset); /* clear reset */
+
+ writew(0x4000, &common0->suspmode);
+ writew(0x4000, &common1->suspmode);
+
+#if defined(__LITTLE_ENDIAN)
+ writel(0x00000000, &align->ehcidatac);
+ writel(0x00000000, &align->ohcidatac);
+#endif
+}
+
+static void init_gether_mdio(void)
+{
+ struct gpio_regs *gpio = GPIO_BASE;
+
+ writew(readw(&gpio->pgcr) | 0x0004, &gpio->pgcr);
+ writeb(readb(&gpio->pgdr) | 0x02, &gpio->pgdr); /* Use ET0-MDIO */
+}
+
+static void set_mac_to_sh_giga_eth_register(int channel, char *mac_string)
+{
+ struct ether_mac_regs *ether;
+ unsigned char mac[6];
+ unsigned long val;
+
+ eth_parse_enetaddr(mac_string, mac);
+
+ if (!channel)
+ ether = GETHER0_MAC_BASE;
+ else
+ ether = GETHER1_MAC_BASE;
+
+ val = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3];
+ writel(val, ðer->mahr);
+ val = (mac[4] << 8) | mac[5];
+ writel(val, ðer->malr);
+}
+
+/*****************************************************************
+ * This PMB must be set on this timing. The lowlevel_init is run on
+ * Area 0(phys 0x00000000), so we have to map it.
+ *
+ * The new PMB table is following:
+ * ent virt phys v sz c wt
+ * 0 0xa0000000 0x40000000 1 128M 0 1
+ * 1 0xa8000000 0x48000000 1 128M 0 1
+ * 2 0xb0000000 0x50000000 1 128M 0 1
+ * 3 0xb8000000 0x58000000 1 128M 0 1
+ * 4 0x80000000 0x40000000 1 128M 1 1
+ * 5 0x88000000 0x48000000 1 128M 1 1
+ * 6 0x90000000 0x50000000 1 128M 1 1
+ * 7 0x98000000 0x58000000 1 128M 1 1
+ */
+static void set_pmb_on_board_init(void)
+{
+ struct mmu_regs *mmu = MMU_BASE;
+
+ /* clear ITLB */
+ writel(0x00000004, &mmu->mmucr);
+
+ /* delete PMB for SPIBOOT */
+ writel(0, PMB_ADDR_BASE(0));
+ writel(0, PMB_DATA_BASE(0));
+
+ /* add PMB for SDRAM(0x40000000 - 0x47ffffff) */
+ /* ppn ub v s1 s0 c wt */
+ writel(mk_pmb_addr_val(0xa0), PMB_ADDR_BASE(0));
+ writel(mk_pmb_data_val(0x40, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(0));
+ writel(mk_pmb_addr_val(0xb0), PMB_ADDR_BASE(2));
+ writel(mk_pmb_data_val(0x50, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(2));
+ writel(mk_pmb_addr_val(0xb8), PMB_ADDR_BASE(3));
+ writel(mk_pmb_data_val(0x58, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(3));
+ writel(mk_pmb_addr_val(0x80), PMB_ADDR_BASE(4));
+ writel(mk_pmb_data_val(0x40, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(4));
+ writel(mk_pmb_addr_val(0x90), PMB_ADDR_BASE(6));
+ writel(mk_pmb_data_val(0x50, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(6));
+ writel(mk_pmb_addr_val(0x98), PMB_ADDR_BASE(7));
+ writel(mk_pmb_data_val(0x58, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(7));
+}
+
+int board_init(void)
+{
+ struct gether_control_regs *gether = GETHER_CONTROL_BASE;
+
+ init_gpio();
+ set_pmb_on_board_init();
+
+ /* Sets TXnDLY to B'010 */
+ writel(0x00000202, &gether->gbecont);
+
+ init_usb_phy();
+ init_gether_mdio();
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+ gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+ printf("DRAM: %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
+
+ return 0;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ struct gpio_regs *gpio = GPIO_BASE;
+
+ writew(readw(&gpio->pgcr) | 0x0040, &gpio->pgcr);
+ writeb(readb(&gpio->pgdr) & ~0x08, &gpio->pgdr); /* Reset */
+ udelay(1);
+ writeb(readb(&gpio->pgdr) | 0x08, &gpio->pgdr); /* Release reset */
+ udelay(200);
+
+ return mmcif_mmc_init();
+}
+
+static int get_sh_eth_mac_raw(unsigned char *buf, int size)
+{
+ struct spi_flash *spi;
+ int ret;
+
+ spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3);
+ if (spi == NULL) {
+ printf("%s: spi_flash probe failed.\n", __func__);
+ return 1;
+ }
+
+ ret = spi_flash_read(spi, SH7753EVB_ETHERNET_MAC_BASE, size, buf);
+ if (ret) {
+ printf("%s: spi_flash read failed.\n", __func__);
+ spi_flash_free(spi);
+ return 1;
+ }
+ spi_flash_free(spi);
+
+ return 0;
+}
+
+static int get_sh_eth_mac(int channel, char *mac_string, unsigned char *buf)
+{
+ memcpy(mac_string, &buf[channel * (SH7753EVB_ETHERNET_MAC_SIZE + 1)],
+ SH7753EVB_ETHERNET_MAC_SIZE);
+ mac_string[SH7753EVB_ETHERNET_MAC_SIZE] = 0x00; /* terminate */
+
+ return 0;
+}
+
+static void init_ethernet_mac(void)
+{
+ char mac_string[64];
+ char env_string[64];
+ int i;
+ unsigned char *buf;
+
+ buf = malloc(256);
+ if (!buf) {
+ printf("%s: malloc failed.\n", __func__);
+ return;
+ }
+ get_sh_eth_mac_raw(buf, 256);
+
+ /* Gigabit Ethernet */
+ for (i = 0; i < SH7753EVB_ETHERNET_NUM_CH; i++) {
+ get_sh_eth_mac(i, mac_string, buf);
+ if (i == 0)
+ setenv("ethaddr", mac_string);
+ else {
+ sprintf(env_string, "eth%daddr", i);
+ setenv(env_string, mac_string);
+ }
+ set_mac_to_sh_giga_eth_register(i, mac_string);
+ }
+
+ free(buf);
+}
+
+int board_late_init(void)
+{
+ init_ethernet_mac();
+
+ return 0;
+}
+
+int do_write_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ int i, ret;
+ char mac_string[256];
+ struct spi_flash *spi;
+ unsigned char *buf;
+
+ if (argc != 3) {
+ buf = malloc(256);
+ if (!buf) {
+ printf("%s: malloc failed.\n", __func__);
+ return 1;
+ }
+
+ get_sh_eth_mac_raw(buf, 256);
+
+ /* print current MAC address */
+ for (i = 0; i < SH7753EVB_ETHERNET_NUM_CH; i++) {
+ get_sh_eth_mac(i, mac_string, buf);
+ printf("GETHERC ch%d = %s\n", i, mac_string);
+ }
+ free(buf);
+ return 0;
+ }
+
+ /* new setting */
+ memset(mac_string, 0xff, sizeof(mac_string));
+ sprintf(mac_string, "%s\t%s",
+ argv[1], argv[2]);
+
+ /* write MAC data to SPI rom */
+ spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3);
+ if (!spi) {
+ printf("%s: spi_flash probe failed.\n", __func__);
+ return 1;
+ }
+
+ ret = spi_flash_erase(spi, SH7753EVB_ETHERNET_MAC_BASE_SPI,
+ SH7753EVB_SPI_SECTOR_SIZE);
+ if (ret) {
+ printf("%s: spi_flash erase failed.\n", __func__);
+ return 1;
+ }
+
+ ret = spi_flash_write(spi, SH7753EVB_ETHERNET_MAC_BASE_SPI,
+ sizeof(mac_string), mac_string);
+ if (ret) {
+ printf("%s: spi_flash write failed.\n", __func__);
+ spi_flash_free(spi);
+ return 1;
+ }
+ spi_flash_free(spi);
+
+ puts("The writing of the MAC address to SPI ROM was completed.\n");
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ write_mac, 3, 1, do_write_mac,
+ "write MAC address for GETHERC",
+ "[GETHERC ch0] [GETHERC ch1]\n"
+);
diff --git a/board/renesas/sh7753evb/spi-boot.c b/board/renesas/sh7753evb/spi-boot.c
new file mode 100644
index 0000000..21903d9
--- /dev/null
+++ b/board/renesas/sh7753evb/spi-boot.c
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+
+#define CONFIG_SPI_ADDR 0x00000000
+#define PHYADDR(_addr) ((_addr & 0x1fffffff) | 0x40000000)
+#define CONFIG_RAM_BOOT_PHYS PHYADDR(CONFIG_SYS_TEXT_BASE)
+
+#define SPIWDMADR 0xFE001018
+#define SPIWDMCNTR 0xFE001020
+#define SPIDMCOR 0xFE001028
+#define SPIDMINTSR 0xFE001188
+#define SPIDMINTMR 0xFE001190
+
+#define SPIDMINTSR_DMEND 0x00000004
+
+#define TBR 0xFE002000
+#define RBR 0xFE002000
+
+#define CR1 0xFE002008
+#define CR2 0xFE002010
+#define CR3 0xFE002018
+#define CR4 0xFE002020
+#define CR7 0xFE002038
+#define CR8 0xFE002040
+
+/* CR1 */
+#define SPI_TBE 0x80
+#define SPI_TBF 0x40
+#define SPI_RBE 0x20
+#define SPI_RBF 0x10
+#define SPI_PFONRD 0x08
+#define SPI_SSDB 0x04
+#define SPI_SSD 0x02
+#define SPI_SSA 0x01
+
+/* CR2 */
+#define SPI_RSTF 0x80
+#define SPI_LOOPBK 0x40
+#define SPI_CPOL 0x20
+#define SPI_CPHA 0x10
+#define SPI_L1M0 0x08
+
+/* CR4 */
+#define SPI_TBEI 0x80
+#define SPI_TBFI 0x40
+#define SPI_RBEI 0x20
+#define SPI_RBFI 0x10
+#define SPI_SpiS0 0x02
+#define SPI_SSS 0x01
+
+/* CR7 */
+#define CR7_IDX_OR12 0x12
+#define OR12_ADDR32 0x00000001
+
+#define spi_write(val, addr) (*(volatile unsigned long *)(addr)) = val
+#define spi_read(addr) (*(volatile unsigned long *)(addr))
+
+/* M25P80 */
+#define M25_READ 0x03
+#define M25_READ_4BYTE 0x13
+
+extern void bss_start(void);
+
+#define __uses_spiboot2 __attribute__((section(".spiboot2.text")))
+static void __uses_spiboot2 spi_reset(void)
+{
+ int timeout = 0x00100000;
+
+ /* Make sure the last transaction is finalized */
+ spi_write(0x00, CR3);
+ spi_write(0x02, CR1);
+ while (!(spi_read(CR4) & SPI_SpiS0)) {
+ if (timeout-- < 0)
+ break;
+ }
+ spi_write(0x00, CR1);
+
+ spi_write(spi_read(CR2) | SPI_RSTF, CR2); /* fifo reset */
+ spi_write(spi_read(CR2) & ~SPI_RSTF, CR2);
+
+ spi_write(0, SPIDMCOR);
+}
+
+static void __uses_spiboot2 spi_read_flash(void *buf, unsigned long addr,
+ unsigned long len)
+{
+ spi_write(CR7_IDX_OR12, CR7);
+ if (spi_read(CR8) & OR12_ADDR32) {
+ /* 4-bytes address mode */
+ spi_write(M25_READ_4BYTE, TBR);
+ spi_write((addr >> 24) & 0xFF, TBR); /* ADDR31-24 */
+ } else {
+ /* 3-bytes address mode */
+ spi_write(M25_READ, TBR);
+ }
+ spi_write((addr >> 16) & 0xFF, TBR); /* ADDR23-16 */
+ spi_write((addr >> 8) & 0xFF, TBR); /* ADDR15-8 */
+ spi_write(addr & 0xFF, TBR); /* ADDR7-0 */
+
+ spi_write(SPIDMINTSR_DMEND, SPIDMINTSR);
+ spi_write((unsigned long)buf, SPIWDMADR);
+ spi_write(len & 0xFFFFFFE0, SPIWDMCNTR);
+ spi_write(1, SPIDMCOR);
+
+ spi_write(0xff, CR3);
+ spi_write(spi_read(CR1) | SPI_SSDB, CR1);
+ spi_write(spi_read(CR1) | SPI_SSA, CR1);
+
+ while (!(spi_read(SPIDMINTSR) & SPIDMINTSR_DMEND))
+ ;
+
+ /* Nagate SP0-SS0 */
+ spi_write(0, CR1);
+}
+
+void __uses_spiboot2 spiboot_main(void)
+{
+ /*
+ * This code rounds len up for SPIWDMCNTR. We should set it to 0 in
+ * lower 5-bits.
+ */
+ void (*_start)(void) = (void *)CONFIG_SYS_TEXT_BASE;
+ volatile unsigned long len = (bss_start - _start + 31) & 0xffffffe0;
+
+ spi_reset();
+ spi_read_flash((void *)CONFIG_RAM_BOOT_PHYS, CONFIG_SPI_ADDR, len);
+
+ _start();
+}
diff --git a/board/renesas/sh7753evb/u-boot.lds b/board/renesas/sh7753evb/u-boot.lds
new file mode 100644
index 0000000..053df64
--- /dev/null
+++ b/board/renesas/sh7753evb/u-boot.lds
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * Copyright (C) 2012
+ * Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
+OUTPUT_ARCH(sh)
+ENTRY(_start)
+
+SECTIONS
+{
+ /*
+ * entry and reloct_dst will be provided via ldflags
+ */
+ . = .;
+
+ PROVIDE (_ftext = .);
+ PROVIDE (_fcode = .);
+ PROVIDE (_start = .);
+
+ .text :
+ {
+ KEEP(arch/sh/cpu/sh4/start.o (.text))
+ *(.spiboot1.text)
+ *(.spiboot2.text)
+ . = ALIGN(8192);
+ common/env_embedded.o (.ppcenv)
+ . = ALIGN(8192);
+ common/env_embedded.o (.ppcenvr)
+ . = ALIGN(8192);
+ *(.text)
+ . = ALIGN(4);
+ } =0xFF
+ PROVIDE (_ecode = .);
+ .rodata :
+ {
+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+ . = ALIGN(4);
+ }
+ PROVIDE (_etext = .);
+
+
+ PROVIDE (_fdata = .);
+ .data :
+ {
+ *(.data)
+ . = ALIGN(4);
+ }
+ PROVIDE (_edata = .);
+
+ PROVIDE (_fgot = .);
+ .got :
+ {
+ *(.got)
+ . = ALIGN(4);
+ }
+ PROVIDE (_egot = .);
+
+ .u_boot_list : {
+ KEEP(*(SORT(.u_boot_list*)));
+ }
+
+ PROVIDE (reloc_dst_end = .);
+ /* _reloc_dst_end = .; */
+
+ PROVIDE (bss_start = .);
+ PROVIDE (__bss_start = .);
+ .bss (NOLOAD) :
+ {
+ *(.bss)
+ . = ALIGN(4);
+ }
+ PROVIDE (bss_end = .);
+
+ PROVIDE (__bss_end = .);
+}
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index 9ae88c5..1b60b8f 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -202,12 +202,12 @@
/* try reading mac address from efuse */
mac_lo = readl((*ctrl)->control_core_mac_id_0_lo);
mac_hi = readl((*ctrl)->control_core_mac_id_0_hi);
- mac_addr[0] = mac_hi & 0xFF;
+ mac_addr[0] = (mac_hi & 0xFF0000) >> 16;
mac_addr[1] = (mac_hi & 0xFF00) >> 8;
- mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
- mac_addr[3] = mac_lo & 0xFF;
+ mac_addr[2] = mac_hi & 0xFF;
+ mac_addr[3] = (mac_lo & 0xFF0000) >> 16;
mac_addr[4] = (mac_lo & 0xFF00) >> 8;
- mac_addr[5] = (mac_lo & 0xFF0000) >> 16;
+ mac_addr[5] = mac_lo & 0xFF;
if (!getenv("ethaddr")) {
printf("<ethaddr> not set. Validating first E-fuse MAC\n");
diff --git a/board/vpac270/u-boot-spl.lds b/board/vpac270/u-boot-spl.lds
index 02d107c..b6fdde4 100644
--- a/board/vpac270/u-boot-spl.lds
+++ b/board/vpac270/u-boot-spl.lds
@@ -20,6 +20,7 @@
.text.0 :
{
arch/arm/cpu/pxa/start.o (.text*)
+ arch/arm/lib/built-in.o (.text*)
board/vpac270/built-in.o (.text*)
drivers/mtd/onenand/built-in.o (.text*)
}
diff --git a/board/xilinx/dts/zynq-microzed.dts b/board/xilinx/dts/zynq-microzed.dts
new file mode 100644
index 0000000..6da71c1
--- /dev/null
+++ b/board/xilinx/dts/zynq-microzed.dts
@@ -0,0 +1,14 @@
+/*
+ * Xilinx MicroZED board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+ model = "Zynq MicroZED Board";
+ compatible = "xlnx,zynq-microzed", "xlnx,zynq-7000";
+};
diff --git a/board/xilinx/dts/zynq-zc702.dts b/board/xilinx/dts/zynq-zc702.dts
new file mode 100644
index 0000000..667dc28
--- /dev/null
+++ b/board/xilinx/dts/zynq-zc702.dts
@@ -0,0 +1,14 @@
+/*
+ * Xilinx ZC702 board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+ model = "Zynq ZC702 Board";
+ compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000";
+};
diff --git a/board/xilinx/dts/zynq-zc706.dts b/board/xilinx/dts/zynq-zc706.dts
new file mode 100644
index 0000000..526fc88
--- /dev/null
+++ b/board/xilinx/dts/zynq-zc706.dts
@@ -0,0 +1,14 @@
+/*
+ * Xilinx ZC706 board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+ model = "Zynq ZC706 Board";
+ compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000";
+};
diff --git a/board/xilinx/dts/zynq-zc770-xm010.dts b/board/xilinx/dts/zynq-zc770-xm010.dts
new file mode 100644
index 0000000..8b542a1
--- /dev/null
+++ b/board/xilinx/dts/zynq-zc770-xm010.dts
@@ -0,0 +1,14 @@
+/*
+ * Xilinx ZC770 XM010 board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+ model = "Zynq ZC770 XM010 Board";
+ compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000";
+};
diff --git a/board/xilinx/dts/zynq-zc770-xm012.dts b/board/xilinx/dts/zynq-zc770-xm012.dts
new file mode 100644
index 0000000..0379a07
--- /dev/null
+++ b/board/xilinx/dts/zynq-zc770-xm012.dts
@@ -0,0 +1,14 @@
+/*
+ * Xilinx ZC770 XM012 board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+ model = "Zynq ZC770 XM012 Board";
+ compatible = "xlnx,zynq-zc770-xm012", "xlnx,zynq-7000";
+};
diff --git a/board/xilinx/dts/zynq-zc770-xm013.dts b/board/xilinx/dts/zynq-zc770-xm013.dts
new file mode 100644
index 0000000..a4f9e05
--- /dev/null
+++ b/board/xilinx/dts/zynq-zc770-xm013.dts
@@ -0,0 +1,14 @@
+/*
+ * Xilinx ZC770 XM013 board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+ model = "Zynq ZC770 XM013 Board";
+ compatible = "xlnx,zynq-zc770-xm013", "xlnx,zynq-7000";
+};
diff --git a/board/xilinx/dts/zynq-zed.dts b/board/xilinx/dts/zynq-zed.dts
new file mode 100644
index 0000000..91a5deb
--- /dev/null
+++ b/board/xilinx/dts/zynq-zed.dts
@@ -0,0 +1,14 @@
+/*
+ * Xilinx ZED board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+ model = "Zynq ZED Board";
+ compatible = "xlnx,zynq-zed", "xlnx,zynq-7000";
+};
diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c
index 5119c09..a5b9bde 100644
--- a/board/xilinx/zynq/board.c
+++ b/board/xilinx/zynq/board.c
@@ -12,6 +12,12 @@
DECLARE_GLOBAL_DATA_PTR;
+/* Bootmode setting values */
+#define ZYNQ_BM_MASK 0x0F
+#define ZYNQ_BM_NOR 0x02
+#define ZYNQ_BM_SD 0x05
+#define ZYNQ_BM_JTAG 0x0
+
#ifdef CONFIG_FPGA
Xilinx_desc fpga;
@@ -59,6 +65,25 @@
return 0;
}
+int board_late_init(void)
+{
+ switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) {
+ case ZYNQ_BM_NOR:
+ setenv("modeboot", "norboot");
+ break;
+ case ZYNQ_BM_SD:
+ setenv("modeboot", "sdboot");
+ break;
+ case ZYNQ_BM_JTAG:
+ setenv("modeboot", "jtagboot");
+ break;
+ default:
+ setenv("modeboot", "");
+ break;
+ }
+
+ return 0;
+}
#ifdef CONFIG_CMD_NET
int board_eth_init(bd_t *bis)
diff --git a/boards.cfg b/boards.cfg
index 9949bb5..928e222 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -65,11 +65,9 @@
Active arm arm920t at91 BuS eb_cpux9k2 eb_cpux9k2_ram eb_cpux9k2:RAMBOOT Jens Scharsig <esw@bus-elektronik.de>
Active arm arm920t at91 eukrea cpuat91 cpuat91 cpuat91 Eric Benard <eric@eukrea.com>
Active arm arm920t at91 eukrea cpuat91 cpuat91_ram cpuat91:RAMBOOT Eric Benard <eric@eukrea.com>
-Active arm arm920t imx - - mx1ads - -
Active arm arm920t imx - - scb9328 - Torsten Koschorrek <koschorrek@synertronixx.de>
Active arm arm920t ks8695 - - cm4008 - Greg Ungerer <greg.ungerer@opengear.com>
Active arm arm920t ks8695 - - cm41xx - -
-Active arm arm920t s3c24x0 friendlyarm mini2440 mini2440 - Gabriel Huau <contact@huau-gabriel.fr>
Active arm arm920t s3c24x0 mpl vcma9 VCMA9 - David Müller <d.mueller@elsoft.ch>
Active arm arm920t s3c24x0 samsung - smdk2410 - David Müller <d.mueller@elsoft.ch>
Active arm arm926ejs - armltd integrator integratorap_cm926ejs integratorap:CM926EJ_S Linus Walleij <linus.walleij@linaro.org>
@@ -171,6 +169,7 @@
Active arm arm926ejs kirkwood karo tk71 tk71 - -
Active arm arm926ejs kirkwood keymile km_arm km_kirkwood km_kirkwood:KM_KIRKWOOD Valentin Longchamp <valentin.longchamp@keymile.com>
Active arm arm926ejs kirkwood keymile km_arm km_kirkwood_pci km_kirkwood:KM_KIRKWOOD_PCI Valentin Longchamp <valentin.longchamp@keymile.com>
+Active arm arm926ejs kirkwood keymile km_arm km_kirkwood_128m16 km_kirkwood:KM_KIRKWOOD_128M16 Valentin Longchamp <valentin.longchamp@keymile.com>
Active arm arm926ejs kirkwood keymile km_arm kmcoge5un km_kirkwood:KM_COGE5UN Valentin Longchamp <valentin.longchamp@keymile.com>
Active arm arm926ejs kirkwood keymile km_arm kmnusa km_kirkwood:KM_NUSA Valentin Longchamp <valentin.longchamp@keymile.com>
Active arm arm926ejs kirkwood keymile km_arm kmsuv31 km_kirkwood:KM_SUV31 Valentin Longchamp <valentin.longchamp@keymile.com>
@@ -280,7 +279,7 @@
Active arm armv7 exynos samsung smdkv310 smdkv310 - Chander Kashyap <k.chander@samsung.com>
Active arm armv7 exynos samsung trats trats - Lukasz Majewski <l.majewski@samsung.com>
Active arm armv7 exynos samsung trats2 trats2 - Piotr Wilczek <p.wilczek@samsung.com>
-Active arm armv7 exynos samsung universal_c210 s5pc210_universal - Minkyu Kang <mk7.kang@samsung.com>
+Active arm armv7 exynos samsung universal_c210 s5pc210_universal - Przemyslaw Marczak <p.marczak@samsung.com>
Active arm armv7 highbank - highbank highbank - Rob Herring <rob.herring@calxeda.com>
Active arm armv7 mx5 denx m53evk m53evk m53evk:IMX_CONFIG=board/denx/m53evk/imximage.cfg Marek Vasut <marek.vasut@gmail.com>
Active arm armv7 mx5 esg ima3-mx53 ima3-mx53 ima3-mx53:IMX_CONFIG=board/esg/ima3-mx53/imximage.cfg -
@@ -326,7 +325,6 @@
Active arm armv7 omap3 logicpd am3517evm am3517_evm - Vaibhav Hiremath <hvaibhav@ti.com>
Active arm armv7 omap3 logicpd omap3som omap3_logic - Peter Barada <peter.barada@logicpd.com>
Active arm armv7 omap3 logicpd zoom1 omap3_zoom1 - Nishanth Menon <nm@ti.com>
-Active arm armv7 omap3 logicpd zoom2 omap3_zoom2 - Tom Rix <Tom.Rix@windriver.com>
Active arm armv7 omap3 matrix_vision mvblx omap3_mvblx - Michael Jones <michael.jones@matrix-vision.de>
Active arm armv7 omap3 nokia rx51 nokia_rx51 - Pali Rohár <pali.rohar@gmail.com>
Active arm armv7 omap3 technexion tao3530 omap3_ha tao3530:SYS_BOARD_OMAP3_HA Stefan Roese <sr@denx.de>
@@ -351,14 +349,18 @@
Active arm armv7 rmobile renesas lager lager_nor lager:NORFLASH Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Active arm armv7 rmobile renesas koelsch koelsch - Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Active arm armv7 rmobile renesas koelsch koelsch_nor koelsch:NORFLASH Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
-Active arm armv7 s5pc1xx samsung goni s5p_goni - Minkyu Kang <mk7.kang@samsung.com>
+Active arm armv7 s5pc1xx samsung goni s5p_goni - Mateusz Zalega <m.zalega@samsung.com>
Active arm armv7 s5pc1xx samsung smdkc100 smdkc100 - Minkyu Kang <mk7.kang@samsung.com>
Active arm armv7 socfpga altera socfpga socfpga_cyclone5 - -
Active arm armv7 u8500 st-ericsson snowball snowball - Mathieu Poirier <mathieu.poirier@linaro.org>
Active arm armv7 u8500 st-ericsson u8500 u8500_href - -
Active arm armv7 vf610 freescale vf610twr vf610twr vf610twr:IMX_CONFIG=board/freescale/vf610twr/imximage.cfg Alison Wang <b18965@freescale.com>
-Active arm armv7 zynq xilinx zynq zynq - Michal Simek <monstr@monstr.eu>
-Active arm armv7 zynq xilinx zynq zynq_dcc zynq:ZYNQ_DCC Michal Simek <monstr@monstr.eu>
+Active arm armv7 zynq xilinx zynq zynq_zc70x - Michal Simek <monstr@monstr.eu>:Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
+Active arm armv7 zynq xilinx zynq zynq_zed - Michal Simek <monstr@monstr.eu>:Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
+Active arm armv7 zynq xilinx zynq zynq_microzed - Michal Simek <monstr@monstr.eu>:Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
+Active arm armv7 zynq xilinx zynq zynq_zc770_xm010 zynq_zc770:ZC770_XM010 Michal Simek <monstr@monstr.eu>:Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
+Active arm armv7 zynq xilinx zynq zynq_zc770_xm012 zynq_zc770:ZC770_XM012 Michal Simek <monstr@monstr.eu>:Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
+Active arm armv7 zynq xilinx zynq zynq_zc770_xm013 zynq_zc770:ZC770_XM013 Michal Simek <monstr@monstr.eu>:Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Active arm armv7:arm720t tegra114 nvidia dalmore dalmore - Tom Warren <twarren@nvidia.com>
Active arm armv7:arm720t tegra20 avionic-design medcom-wide medcom-wide - Alban Bedel <alban.bedel@avionic-design.de>
Active arm armv7:arm720t tegra20 avionic-design plutux plutux - Alban Bedel <alban.bedel@avionic-design.de>
@@ -397,6 +399,7 @@
Active arm pxa - icpdas lp8x4x lp8x4x - Sergey Yanovich <ynvich@gmail.com>
Active arm pxa - toradex - colibri_pxa270 - Marek Vasut <marek.vasut@gmail.com>
Active arm sa1100 - - - jornada - Kristoffer Ericson <kristoffer.ericson@gmail.com>
+Active aarch64 armv8 - armltd vexpress64 vexpress_aemv8a vexpress_aemv8a:ARM64 David Feng <fenghua@phytium.com.cn>
Active avr32 at32ap at32ap700x atmel - atngw100 - Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Active avr32 at32ap at32ap700x atmel - atngw100mkii - Andreas Bießmann <andreas.devel@googlemail.com>
Active avr32 at32ap at32ap700x atmel atstk1000 atstk1002 - Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
@@ -640,7 +643,6 @@
Active powerpc mpc824x - - cu824 CU824 - Wolfgang Denk <wd@denx.de>
Active powerpc mpc824x - - eXalion eXalion - Torsten Demke <torsten.demke@fci.com>
Active powerpc mpc824x - - hidden_dragon HIDDEN_DRAGON - Yusdi Santoso <yusdi_santoso@adaptec.com>
-Active powerpc mpc824x - - linkstation linkstation_HGLAN linkstation:HGLAN=1 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Active powerpc mpc824x - - musenki MUSENKI - Jim Thompson <jim@musenki.com>
Active powerpc mpc824x - - mvblue MVBLUE - -
Active powerpc mpc824x - - sandpoint Sandpoint8240 - Wolfgang Denk <wd@denx.de>
@@ -970,6 +972,7 @@
Active powerpc mpc85xx - freescale t4qds T4160QDS_SPIFLASH T4240QDS:PPC_T4160,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 -
Active powerpc mpc85xx - freescale t4qds T4240EMU T4240EMU:PPC_T4240 York Sun <yorksun@freescale.com>
Active powerpc mpc85xx - freescale t4qds T4240QDS T4240QDS:PPC_T4240 -
+Active powerpc mpc85xx - freescale t4qds T4240QDS_NAND T4240QDS:PPC_T4240,RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000 -
Active powerpc mpc85xx - freescale t4qds T4240QDS_SDCARD T4240QDS:PPC_T4240,RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000 -
Active powerpc mpc85xx - freescale t4qds T4240QDS_SPIFLASH T4240QDS:PPC_T4240,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 -
Active powerpc mpc85xx - freescale t4qds T4240QDS_SRIO_PCIE_BOOT T4240QDS:PPC_T4240,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000 -
@@ -1213,6 +1216,7 @@
Active sh sh4 - renesas r2dplus r2dplus - Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>:Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Active sh sh4 - renesas r7780mp r7780mp - Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>:Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Active sh sh4 - renesas sh7752evb sh7752evb - -
+Active sh sh4 - renesas sh7753evb sh7753evb - -
Active sh sh4 - renesas sh7757lcr sh7757lcr - -
Active sh sh4 - renesas sh7763rdp sh7763rdp - Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>:Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Active sh sh4 - renesas sh7785lcr sh7785lcr - -
@@ -1241,4 +1245,3 @@
Orphan powerpc mpc8xx - - mbx8xx MBX - -
Orphan powerpc mpc8xx - - mbx8xx MBX860T - -
Orphan powerpc mpc8xx - - nx823 NX823 - -
-
diff --git a/common/Makefile b/common/Makefile
index 74404be..d12cba5 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -230,8 +230,6 @@
obj-y += memsize.o
obj-y += stdio.o
-CPPFLAGS += -I..
-
$(obj)env_embedded.o: $(src)env_embedded.c
$(CC) $(AFLAGS) -Wa,--no-warn \
-DENV_CRC=$(shell $(obj)../tools/envcrc) \
diff --git a/common/board_f.c b/common/board_f.c
index f0664bc..aa70c3e 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -347,9 +347,10 @@
#ifdef CONFIG_SANDBOX
static int setup_ram_buf(void)
{
- gd->arch.ram_buf = os_malloc(CONFIG_SYS_SDRAM_SIZE);
- assert(gd->arch.ram_buf);
- gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+ struct sandbox_state *state = state_get_current();
+
+ gd->arch.ram_buf = state->ram_buf;
+ gd->ram_size = state->ram_size;
return 0;
}
@@ -462,7 +463,7 @@
static int reserve_mmu(void)
{
/* reserve TLB table */
- gd->arch.tlb_size = 4096 * 4;
+ gd->arch.tlb_size = PGTABLE_SIZE;
gd->relocaddr -= gd->arch.tlb_size;
/* round down to next 64 kB limit */
@@ -614,7 +615,7 @@
* TODO(sjg@chromium.org): Perhaps create arch_reserve_stack()
* to handle this and put in arch/xxx/lib/stack.c
*/
-# ifdef CONFIG_ARM
+# if defined(CONFIG_ARM) && !defined(CONFIG_ARM64)
# ifdef CONFIG_USE_IRQ
gd->start_addr_sp -= (CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ);
debug("Reserving %zu Bytes for IRQ stack at: %08lx\n",
@@ -772,7 +773,7 @@
}
/* ARM calls relocate_code from its crt0.S */
-#if !defined(CONFIG_ARM)
+#if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX)
static int jump_to_copy(void)
{
@@ -792,8 +793,6 @@
* (CPU cache)
*/
board_init_f_r_trampoline(gd->start_addr_sp);
-#elif defined(CONFIG_SANDBOX)
- board_init_r(gd->new_gd, 0);
#else
relocate_code(gd->start_addr_sp, gd->new_gd, gd->relocaddr);
#endif
@@ -811,11 +810,6 @@
}
static init_fnc_t init_sequence_f[] = {
-#if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC512X) && \
- !defined(CONFIG_MPC83xx) && !defined(CONFIG_MPC85xx) && \
- !defined(CONFIG_MPC86xx) && !defined(CONFIG_X86)
- zero_global_data,
-#endif
#ifdef CONFIG_SANDBOX
setup_ram_buf,
#endif
@@ -995,7 +989,7 @@
INIT_FUNC_WATCHDOG_RESET
reloc_fdt,
setup_reloc,
-#ifndef CONFIG_ARM
+#if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX)
jump_to_copy,
#endif
NULL,
@@ -1009,12 +1003,24 @@
gd = &data;
#endif
+ /*
+ * Clear global data before it is accessed at debug print
+ * in initcall_run_list. Otherwise the debug print probably
+ * get the wrong vaule of gd->have_console.
+ */
+#if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC512X) && \
+ !defined(CONFIG_MPC83xx) && !defined(CONFIG_MPC85xx) && \
+ !defined(CONFIG_MPC86xx) && !defined(CONFIG_X86)
+ zero_global_data();
+#endif
+
gd->flags = boot_flags;
+ gd->have_console = 0;
if (initcall_run_list(init_sequence_f))
hang();
-#ifndef CONFIG_ARM
+#if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX)
/* NOTREACHED - jump_to_copy() does not return */
hang();
#endif
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index ba73f57..3f57659 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -23,6 +23,11 @@
#include <asm/io.h>
#include <linux/compiler.h>
+#if defined(CONFIG_BOOTM_VXWORKS) && \
+ (defined(CONFIG_PPC) || defined(CONFIG_ARM))
+#include <vxworks.h>
+#endif
+
#if defined(CONFIG_CMD_USB)
#include <usb.h>
#endif
@@ -120,8 +125,11 @@
#if defined(CONFIG_BOOTM_PLAN9)
static boot_os_fn do_bootm_plan9;
#endif
-#if defined(CONFIG_CMD_ELF)
+#if defined(CONFIG_BOOTM_VXWORKS) && \
+ (defined(CONFIG_PPC) || defined(CONFIG_ARM))
static boot_os_fn do_bootm_vxworks;
+#endif
+#if defined(CONFIG_CMD_ELF)
static boot_os_fn do_bootm_qnxelf;
int do_bootvx(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
int do_bootelf(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
@@ -149,8 +157,11 @@
#if defined(CONFIG_BOOTM_PLAN9)
[IH_OS_PLAN9] = do_bootm_plan9,
#endif
-#if defined(CONFIG_CMD_ELF)
+#if defined(CONFIG_BOOTM_VXWORKS) && \
+ (defined(CONFIG_PPC) || defined(CONFIG_ARM))
[IH_OS_VXWORKS] = do_bootm_vxworks,
+#endif
+#if defined(CONFIG_CMD_ELF)
[IH_OS_QNX] = do_bootm_qnxelf,
#endif
#ifdef CONFIG_INTEGRITY
@@ -333,7 +344,8 @@
if (((images.os.type == IH_TYPE_KERNEL) ||
(images.os.type == IH_TYPE_KERNEL_NOLOAD) ||
(images.os.type == IH_TYPE_MULTI)) &&
- (images.os.os == IH_OS_LINUX)) {
+ (images.os.os == IH_OS_LINUX ||
+ images.os.os == IH_OS_VXWORKS)) {
if (bootm_find_ramdisk(flag, argc, argv))
return 1;
@@ -1531,10 +1543,10 @@
/*
* NetBSD Stage-2 Loader Parameters:
- * r3: ptr to board info data
- * r4: image address
- * r5: console device
- * r6: boot args string
+ * arg[0]: pointer to board info data
+ * arg[1]: image load address
+ * arg[2]: char pointer to the console device to use
+ * arg[3]: char pointer to the boot arguments
*/
(*loader)(gd->bd, os_hdr, consdev, cmdline);
@@ -1678,12 +1690,66 @@
}
#endif /* CONFIG_BOOTM_PLAN9 */
-#if defined(CONFIG_CMD_ELF)
+#if defined(CONFIG_BOOTM_VXWORKS) && \
+ (defined(CONFIG_PPC) || defined(CONFIG_ARM))
+
+void do_bootvx_fdt(bootm_headers_t *images)
+{
+#if defined(CONFIG_OF_LIBFDT)
+ int ret;
+ char *bootline;
+ ulong of_size = images->ft_len;
+ char **of_flat_tree = &images->ft_addr;
+ struct lmb *lmb = &images->lmb;
+
+ if (*of_flat_tree) {
+ boot_fdt_add_mem_rsv_regions(lmb, *of_flat_tree);
+
+ ret = boot_relocate_fdt(lmb, of_flat_tree, &of_size);
+ if (ret)
+ return;
+
+ ret = fdt_add_subnode(*of_flat_tree, 0, "chosen");
+ if ((ret >= 0 || ret == -FDT_ERR_EXISTS)) {
+ bootline = getenv("bootargs");
+ if (bootline) {
+ ret = fdt_find_and_setprop(*of_flat_tree,
+ "/chosen", "bootargs",
+ bootline,
+ strlen(bootline) + 1, 1);
+ if (ret < 0) {
+ printf("## ERROR: %s : %s\n", __func__,
+ fdt_strerror(ret));
+ return;
+ }
+ }
+ } else {
+ printf("## ERROR: %s : %s\n", __func__,
+ fdt_strerror(ret));
+ return;
+ }
+ }
+#endif
+
+ boot_prep_vxworks(images);
+
+ bootstage_mark(BOOTSTAGE_ID_RUN_OS);
+
+#if defined(CONFIG_OF_LIBFDT)
+ printf("## Starting vxWorks at 0x%08lx, device tree at 0x%08lx ...\n",
+ (ulong)images->ep, (ulong)*of_flat_tree);
+#else
+ printf("## Starting vxWorks at 0x%08lx\n", (ulong)images->ep);
+#endif
+
+ boot_jump_vxworks(images);
+
+ puts("## vxWorks terminated\n");
+}
+
static int do_bootm_vxworks(int flag, int argc, char * const argv[],
bootm_headers_t *images)
{
- char str[80];
-
if (flag != BOOTM_STATE_OS_GO)
return 0;
@@ -1694,13 +1760,13 @@
}
#endif
- sprintf(str, "%lx", images->ep); /* write entry-point into string */
- setenv("loadaddr", str);
- do_bootvx(NULL, 0, 0, NULL);
+ do_bootvx_fdt(images);
return 1;
}
+#endif
+#if defined(CONFIG_CMD_ELF)
static int do_bootm_qnxelf(int flag, int argc, char * const argv[],
bootm_headers_t *images)
{
diff --git a/common/cmd_elf.c b/common/cmd_elf.c
index f741f6b..ab9c7e3 100644
--- a/common/cmd_elf.c
+++ b/common/cmd_elf.c
@@ -156,16 +156,16 @@
* If we don't know where the image is then we're done.
*/
- if (argc < 1)
+ if (argc < 2)
addr = load_addr;
else
- addr = simple_strtoul(argv[0], NULL, 16);
+ addr = simple_strtoul(argv[1], NULL, 16);
#if defined(CONFIG_CMD_NET)
/*
* Check to see if we need to tftp the image ourselves before starting
*/
- if ((argc == 1) && (strcmp(argv[0], "tftp") == 0)) {
+ if ((argc == 2) && (strcmp(argv[1], "tftp") == 0)) {
if (NetLoop(TFTPGET) <= 0)
return 1;
printf("Automatic boot of VxWorks image at address 0x%08lx ...\n",
diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c
index 67a94a7..da5fef9 100644
--- a/common/cmd_mmc.c
+++ b/common/cmd_mmc.c
@@ -340,6 +340,28 @@
}
#endif /* CONFIG_SUPPORT_EMMC_BOOT */
}
+
+ else if (argc == 3 && strcmp(argv[1], "setdsr") == 0) {
+ struct mmc *mmc = find_mmc_device(curr_device);
+ u32 val = simple_strtoul(argv[2], NULL, 16);
+ int ret;
+
+ if (!mmc) {
+ printf("no mmc device at slot %x\n", curr_device);
+ return 1;
+ }
+ ret = mmc_set_dsr(mmc, val);
+ printf("set dsr %s\n", (!ret) ? "OK, force rescan" : "ERROR");
+ if (!ret) {
+ mmc->has_init = 0;
+ if (mmc_init(mmc))
+ return 1;
+ else
+ return 0;
+ }
+ return ret;
+ }
+
state = MMC_INVALID;
if (argc == 5 && strcmp(argv[1], "read") == 0)
state = MMC_READ;
@@ -423,5 +445,6 @@
"mmc bootpart <device num> <boot part size MB> <RPMB part size MB>\n"
" - change sizes of boot and RPMB partitions of specified device\n"
#endif
+ "mmc setdsr - set DSR register value\n"
);
#endif /* !CONFIG_GENERIC_MMC */
diff --git a/common/cmd_pxe.c b/common/cmd_pxe.c
index db6b156..c27ec35 100644
--- a/common/cmd_pxe.c
+++ b/common/cmd_pxe.c
@@ -59,7 +59,7 @@
uchar ethaddr[6];
if (outbuf_len < 21) {
- printf("outbuf is too small (%d < 21)\n", outbuf_len);
+ printf("outbuf is too small (%zd < 21)\n", outbuf_len);
return -EINVAL;
}
@@ -103,7 +103,7 @@
path_len = (last_slash - bootfile) + 1;
if (bootfile_path_size < path_len) {
- printf("bootfile_path too small. (%d < %d)\n",
+ printf("bootfile_path too small. (%zd < %zd)\n",
bootfile_path_size, path_len);
return -1;
diff --git a/common/cmd_sandbox.c b/common/cmd_sandbox.c
index 8d59364..00982b1 100644
--- a/common/cmd_sandbox.c
+++ b/common/cmd_sandbox.c
@@ -6,6 +6,9 @@
#include <common.h>
#include <fs.h>
+#include <part.h>
+#include <sandboxblockdev.h>
+#include <asm/errno.h>
static int do_sandbox_load(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
@@ -25,10 +28,69 @@
return do_save(cmdtp, flag, argc, argv, FS_TYPE_SANDBOX);
}
+static int do_sandbox_bind(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ if (argc < 2 || argc > 3)
+ return CMD_RET_USAGE;
+ char *ep;
+ char *dev_str = argv[1];
+ char *file = argc >= 3 ? argv[2] : NULL;
+ int dev = simple_strtoul(dev_str, &ep, 16);
+ if (*ep) {
+ printf("** Bad device specification %s **\n", dev_str);
+ return CMD_RET_USAGE;
+ }
+ return host_dev_bind(dev, file);
+}
+
+static int do_sandbox_info(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ if (argc < 1 || argc > 2)
+ return CMD_RET_USAGE;
+ int min_dev = 0;
+ int max_dev = CONFIG_HOST_MAX_DEVICES - 1;
+ if (argc >= 2) {
+ char *ep;
+ char *dev_str = argv[1];
+ int dev = simple_strtoul(dev_str, &ep, 16);
+ if (*ep) {
+ printf("** Bad device specification %s **\n", dev_str);
+ return CMD_RET_USAGE;
+ }
+ min_dev = dev;
+ max_dev = dev;
+ }
+ int dev;
+ printf("%3s %12s %s\n", "dev", "blocks", "path");
+ for (dev = min_dev; dev <= max_dev; dev++) {
+ block_dev_desc_t *blk_dev;
+ int ret;
+
+ printf("%3d ", dev);
+ ret = host_get_dev_err(dev, &blk_dev);
+ if (ret) {
+ if (ret == -ENOENT)
+ puts("Not bound to a backing file\n");
+ else if (ret == -ENODEV)
+ puts("Invalid host device number\n");
+
+ continue;
+ }
+ struct host_block_dev *host_dev = blk_dev->priv;
+ printf("%12lu %s\n", (unsigned long)blk_dev->lba,
+ host_dev->filename);
+ }
+ return 0;
+}
+
static cmd_tbl_t cmd_sandbox_sub[] = {
U_BOOT_CMD_MKENT(load, 7, 0, do_sandbox_load, "", ""),
U_BOOT_CMD_MKENT(ls, 3, 0, do_sandbox_ls, "", ""),
U_BOOT_CMD_MKENT(save, 6, 0, do_sandbox_save, "", ""),
+ U_BOOT_CMD_MKENT(bind, 3, 0, do_sandbox_bind, "", ""),
+ U_BOOT_CMD_MKENT(info, 3, 0, do_sandbox_info, "", ""),
};
static int do_sandbox(cmd_tbl_t *cmdtp, int flag, int argc,
@@ -57,4 +119,6 @@
"sb ls host <filename> - list files on host\n"
"sb save host <dev> <filename> <addr> <bytes> [<offset>] - "
"save a file to host\n"
+ "sb bind <dev> [<filename>] - bind \"host\" device to file\n"
+ "sb info [<dev>] - show device binding & info"
);
diff --git a/common/console.c b/common/console.c
index cc55068..2dfb788 100644
--- a/common/console.c
+++ b/common/console.c
@@ -8,6 +8,7 @@
#include <common.h>
#include <stdarg.h>
#include <malloc.h>
+#include <os.h>
#include <serial.h>
#include <stdio_dev.h>
#include <exports.h>
@@ -415,6 +416,12 @@
void putc(const char c)
{
+#ifdef CONFIG_SANDBOX
+ if (!gd) {
+ os_putc(c);
+ return;
+ }
+#endif
#ifdef CONFIG_SILENT_CONSOLE
if (gd->flags & GD_FLG_SILENT)
return;
@@ -439,6 +446,13 @@
void puts(const char *s)
{
+#ifdef CONFIG_SANDBOX
+ if (!gd) {
+ os_puts(s);
+ return;
+ }
+#endif
+
#ifdef CONFIG_SILENT_CONSOLE
if (gd->flags & GD_FLG_SILENT)
return;
@@ -467,7 +481,7 @@
uint i;
char printbuffer[CONFIG_SYS_PBSIZE];
-#ifndef CONFIG_PRE_CONSOLE_BUFFER
+#if !defined(CONFIG_SANDBOX) && !defined(CONFIG_PRE_CONSOLE_BUFFER)
if (!gd->have_console)
return 0;
#endif
diff --git a/common/fdt_support.c b/common/fdt_support.c
index 1f0d8f5..b9dce99 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -21,6 +21,34 @@
*/
DECLARE_GLOBAL_DATA_PTR;
+/*
+ * Get cells len in bytes
+ * if #NNNN-cells property is 2 then len is 8
+ * otherwise len is 4
+ */
+static int get_cells_len(void *blob, char *nr_cells_name)
+{
+ const fdt32_t *cell;
+
+ cell = fdt_getprop(blob, 0, nr_cells_name, NULL);
+ if (cell && fdt32_to_cpu(*cell) == 2)
+ return 8;
+
+ return 4;
+}
+
+/*
+ * Write a 4 or 8 byte big endian cell
+ */
+static void write_cell(u8 *addr, u64 val, int size)
+{
+ int shift = (size - 1) * 8;
+ while (size-- > 0) {
+ *addr++ = (val >> shift) & 0xff;
+ shift -= 8;
+ }
+}
+
/**
* fdt_getprop_u32_default - Find a node and return it's property or a default
*
@@ -131,9 +159,9 @@
int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end, int force)
{
- int nodeoffset;
+ int nodeoffset, addr_cell_len;
int err, j, total;
- fdt32_t tmp;
+ fdt64_t tmp;
const char *path;
uint64_t addr, size;
@@ -170,9 +198,11 @@
return err;
}
+ addr_cell_len = get_cells_len(fdt, "#address-cells");
+
path = fdt_getprop(fdt, nodeoffset, "linux,initrd-start", NULL);
if ((path == NULL) || force) {
- tmp = cpu_to_fdt32(initrd_start);
+ write_cell((u8 *)&tmp, initrd_start, addr_cell_len);
err = fdt_setprop(fdt, nodeoffset,
"linux,initrd-start", &tmp, sizeof(tmp));
if (err < 0) {
@@ -181,7 +211,7 @@
fdt_strerror(err));
return err;
}
- tmp = cpu_to_fdt32(initrd_end);
+ write_cell((u8 *)&tmp, initrd_end, addr_cell_len);
err = fdt_setprop(fdt, nodeoffset,
"linux,initrd-end", &tmp, sizeof(tmp));
if (err < 0) {
@@ -343,34 +373,6 @@
do_fixup_by_compat(fdt, compat, prop, &tmp, 4, create);
}
-/*
- * Get cells len in bytes
- * if #NNNN-cells property is 2 then len is 8
- * otherwise len is 4
- */
-static int get_cells_len(void *blob, char *nr_cells_name)
-{
- const fdt32_t *cell;
-
- cell = fdt_getprop(blob, 0, nr_cells_name, NULL);
- if (cell && fdt32_to_cpu(*cell) == 2)
- return 8;
-
- return 4;
-}
-
-/*
- * Write a 4 or 8 byte big endian cell
- */
-static void write_cell(u8 *addr, u64 val, int size)
-{
- int shift = (size - 1) * 8;
- while (size-- > 0) {
- *addr++ = (val >> shift) & 0xff;
- shift -= 8;
- }
-}
-
#ifdef CONFIG_NR_DRAM_BANKS
#define MEMORY_BANKS_MAX CONFIG_NR_DRAM_BANKS
#else
@@ -400,10 +402,11 @@
nodeoffset = fdt_path_offset(blob, "/memory");
if (nodeoffset < 0) {
nodeoffset = fdt_add_subnode(blob, 0, "memory");
- if (nodeoffset < 0)
+ if (nodeoffset < 0) {
printf("WARNING: could not create /memory: %s.\n",
fdt_strerror(nodeoffset));
- return nodeoffset;
+ return nodeoffset;
+ }
}
err = fdt_setprop(blob, nodeoffset, "device_type", "memory",
sizeof("memory"));
diff --git a/common/image.c b/common/image.c
index b0ae58f..4145354 100644
--- a/common/image.c
+++ b/common/image.c
@@ -81,6 +81,7 @@
{ IH_ARCH_NDS32, "nds32", "NDS32", },
{ IH_ARCH_OPENRISC, "or1k", "OpenRISC 1000",},
{ IH_ARCH_SANDBOX, "sandbox", "Sandbox", },
+ { IH_ARCH_ARM64, "arm64", "AArch64", },
{ -1, "", "", },
};
diff --git a/config.mk b/config.mk
index d5b09a0..b824bb3 100644
--- a/config.mk
+++ b/config.mk
@@ -125,9 +125,9 @@
# cc-version
# Usage gcc-ver := $(call cc-version)
-cc-version = $(shell $(SHELL) $(SRCTREE)/tools/gcc-version.sh $(CC))
-binutils-version = $(shell $(SHELL) $(SRCTREE)/tools/binutils-version.sh $(AS))
-dtc-version = $(shell $(SHELL) $(SRCTREE)/tools/dtc-version.sh $(DTC))
+cc-version = $(shell $(SHELL) $(SRCTREE)/scripts/gcc-version.sh $(CC))
+binutils-version = $(shell $(SHELL) $(SRCTREE)/scripts/binutils-version.sh $(AS))
+dtc-version = $(shell $(SHELL) $(SRCTREE)/scripts/dtc-version.sh $(DTC))
#
# Include the make variables (CC, etc...)
diff --git a/disk/part.c b/disk/part.c
index d2e34cf..6941033 100644
--- a/disk/part.c
+++ b/disk/part.c
@@ -43,6 +43,9 @@
#if defined(CONFIG_SYSTEMACE)
{ .name = "ace", .get_dev = systemace_get_dev, },
#endif
+#if defined(CONFIG_SANDBOX)
+ { .name = "host", .get_dev = host_get_dev, },
+#endif
{ },
};
@@ -286,6 +289,9 @@
case IF_TYPE_MMC:
puts ("MMC");
break;
+ case IF_TYPE_HOST:
+ puts("HOST");
+ break;
default:
puts ("UNKNOWN");
break;
diff --git a/doc/README.arm64 b/doc/README.arm64
new file mode 100644
index 0000000..75586db
--- /dev/null
+++ b/doc/README.arm64
@@ -0,0 +1,46 @@
+U-boot for arm64
+
+Summary
+=======
+No hardware platform of arm64 is available now. The u-boot is
+simulated on Foundation Model and Fast Model for ARMv8.
+
+Notes
+=====
+
+1. Currenly, u-boot run at the highest exception level processor
+ supported and jump to EL2 or optionally EL1 before enter OS.
+
+2. U-boot for arm64 is compiled with AArch64-gcc. AArch64-gcc
+ use rela relocation format, a tool(tools/relocate-rela) by Scott Wood
+ is used to encode the initial addend of rela to u-boot.bin. After running,
+ the u-boot will be relocated to destination again.
+
+3. Fdt should be placed at a 2-megabyte boundary and within the first 512
+ megabytes from the start of the kernel image. So, fdt_high should be
+ defined specially.
+ Please reference linux/Documentation/arm64/booting.txt for detail.
+
+4. Spin-table is used to wake up secondary processors. One location
+ (or per processor location) is defined to hold the kernel entry point
+ for secondary processors. It must be ensured that the location is
+ accessible and zero immediately after secondary processor
+ enter slave_cpu branch execution in start.S. The location address
+ is encoded in cpu node of DTS. Linux kernel store the entry point
+ of secondary processors to it and send event to wakeup secondary
+ processors.
+ Please reference linux/Documentation/arm64/booting.txt for detail.
+
+5. Generic board is supported.
+
+6. CONFIG_ARM64 instead of CONFIG_ARMV8 is used to distinguish aarch64 and
+ aarch32 specific codes.
+
+Contributor
+===========
+ Tom Rini <trini@ti.com>
+ Scott Wood <scottwood@freescale.com>
+ York Sun <yorksun@freescale.com>
+ Simon Glass <sjg@chromium.org>
+ Sharma Bhupesh <bhupesh.sharma@freescale.com>
+ Rob Herring <robherring2@gmail.com>
diff --git a/doc/README.mini2440 b/doc/README.mini2440
deleted file mode 100644
index 311ca52..0000000
--- a/doc/README.mini2440
+++ /dev/null
@@ -1,28 +0,0 @@
-U-Boot for FriendlyARM Mini2440 (s3c2440)
-
-This file contains information for the port of U-Boot to FriendlyARM
-mini2440
-
-All information about the board can be found on :
-http://www.friendlyarm.net/products/mini2440
-
-To build u-boot : ./MAKEALL mini2440
-
-Overview :
---------
-FriendlyARM Mini 2440 SBC (Single-Board Computer) with 400 MHz Samsung S3C2440
-ARM9 processor. The board measures 100 x 100 mm, ideal for learning about ARM9
-systems. It's a low cost board.
-
-Boot Methods :
-------------
-Mini2440 can boot from NOR or NAND.
-
-Build :
------
-./MAKEALL mini2440
-
-or
-
-make mini2440_config
-make
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 604de0c..2aed855 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,8 +11,10 @@
Board Arch CPU Commit Removed Last known maintainer/contact
=================================================================================================
-omap730p2 arm arm926ejs - 2013-11-11
-pn62 powerpc mpc824x - 2013-11-11 Wolfgang Grandegger <wg@grandegger.com>
+mx1ads arm arm920t - 2014-01-13
+mini2440 arm arm920t - 2014-01-13 Gabriel Huau <contact@huau-gabriel.fr>
+omap730p2 arm arm926ejs 79c5c08d 2013-11-11
+pn62 powerpc mpc824x 649acfe1 2013-11-11 Wolfgang Grandegger <wg@grandegger.com>
pdnb3 arm ixp 304db0b 2013-09-24 Stefan Roese <sr@denx.de>
scpu arm ixp 304db0b 2013-09-24 Stefan Roese <sr@denx.de>
omap1510inn arm arm925t 0610a16 2013-09-23 Kshitij Gupta <kshitij@ti.com>
diff --git a/doc/README.sh7753evb b/doc/README.sh7753evb
new file mode 100644
index 0000000..5fe178c
--- /dev/null
+++ b/doc/README.sh7753evb
@@ -0,0 +1,67 @@
+========================================
+Renesas SH7753 EVB board
+========================================
+
+This board specification:
+=========================
+
+The SH7753 EVB (board config name:sh7753evb) has the following device:
+
+ - SH7753 (SH-4A)
+ - DDR3-SDRAM 512MB
+ - SPI ROM 8MB
+ - Gigabit Ethernet controllers
+ - eMMC 4GB
+
+
+Configuration for This board:
+=============================
+
+You can select the configuration as follows:
+
+ - make sh7753evb_config
+
+
+This board specific command:
+============================
+
+This board has the following its specific command:
+
+ - write_mac
+
+
+1. write_mac
+
+You can write MAC address to SPI ROM.
+
+ Usage 1) Write MAC address
+
+ write_mac [GETHERC ch0] [GETHERC ch1]
+
+ For example)
+ => write_mac 74:90:50:00:33:9e 74:90:50:00:33:9f
+ *) We have to input the command as a single line
+ (without carriage return)
+ *) We have to reset after input the command.
+
+ Usage 2) Show current data
+
+ write_mac
+
+ For example)
+ => write_mac
+ GETHERC ch0 = 74:90:50:00:33:9e
+ GETHERC ch1 = 74:90:50:00:33:9f
+
+
+Update SPI ROM:
+============================
+
+1. Copy u-boot image to RAM area.
+2. Probe SPI device.
+ => sf probe 0
+ SF: Detected MX25L6405D with page size 64KiB, total 8 MiB
+3. Erase SPI ROM.
+ => sf erase 0 80000
+4. Write u-boot image to SPI ROM.
+ => sf write 0x48000000 0 80000
diff --git a/doc/README.socfpga b/doc/README.socfpga
new file mode 100644
index 0000000..cfcbbfe
--- /dev/null
+++ b/doc/README.socfpga
@@ -0,0 +1,53 @@
+
+--------------------------------------------
+SOCFPGA Documentation for U-Boot and SPL
+--------------------------------------------
+
+This README is about U-Boot and SPL support for Altera's ARM Cortex-A9MPCore
+based SOCFPGA. To know more about the hardware itself, please refer to
+www.altera.com.
+
+
+--------------------------------------------
+socfpga_dw_mmc
+--------------------------------------------
+Here are macro and detailed configuration required to enable DesignWare SDMMC
+controller support within SOCFPGA
+
+#define CONFIG_MMC
+-> To enable the SD MMC framework support
+
+#define CONFIG_SDMMC_BASE (SOCFPGA_SDMMC_ADDRESS)
+-> The base address of CSR register for DesignWare SDMMC controller
+
+#define CONFIG_GENERIC_MMC
+-> Enable the generic MMC driver
+
+#define CONFIG_SYS_MMC_MAX_BLK_COUNT 256
+-> Using smaller max blk cnt to avoid flooding the limited stack in OCRAM
+
+#define CONFIG_DWMMC
+-> Enable the common DesignWare SDMMC controller framework
+
+#define CONFIG_SOCFPGA_DWMMC
+-> Enable the SOCFPGA specific driver for DesignWare SDMMC controller
+
+#define CONFIG_SOCFPGA_DWMMC_FIFO_DEPTH 1024
+-> The FIFO depth for SOCFPGA DesignWare SDMMC controller
+
+#define CONFIG_SOCFPGA_DWMMC_DRVSEL 3
+-> Phase-shifted clock of sdmmc_clk for controller to drive command and data to
+the card to meet hold time requirements. SD clock is running at 50MHz and
+drvsel is set to shift 135 degrees (3 * 45 degrees). With that, the hold time
+is 135 / 360 * 20ns = 7.5ns.
+
+#define CONFIG_SOCFPGA_DWMMC_SMPSEL 0
+-> Phase-shifted clock of sdmmc_clk used to sample the command and data from
+the card
+
+#define CONFIG_SOCFPGA_DWMMC_BUS_WIDTH 4
+-> Bus width of data line which either 1, 4 or 8 and based on board routing.
+
+#define CONFIG_SOCFPGA_DWMMC_BUS_HZ 50000000
+-> The clock rate to controller. Do note the controller have a wrapper which
+divide the clock from PLL by 4.
diff --git a/doc/README.vxworks b/doc/README.vxworks
new file mode 100644
index 0000000..4cb302e
--- /dev/null
+++ b/doc/README.vxworks
@@ -0,0 +1,19 @@
+From VxWorks 6.9+ (not include 6.9), VxWorks starts adopting device tree as its hardware
+decription mechansim (for PowerPC and ARM), thus requiring boot interface changes.
+This section will describe the new interface.
+
+For PowerPC, the calling convention of the new VxWorks entry point conforms to the ePAPR standard,
+which is shown below (see ePAPR for more details):
+
+ void (*kernel_entry)(fdt_addr,
+ 0, 0, EPAPR_MAGIC, boot_IMA, 0, 0)
+
+For ARM, the calling convention is show below:
+
+ void (*kernel_entry)(void *fdt_addr)
+
+When booting new VxWorks kernel (uImage format), the parameters passed to bootm is like below:
+
+ bootm <kernel image address> - <device tree address>
+
+The do_bootvx command still works as it was for older VxWorks kernels.
diff --git a/doc/README.zynq b/doc/README.zynq
new file mode 100644
index 0000000..043c970
--- /dev/null
+++ b/doc/README.zynq
@@ -0,0 +1,94 @@
+#
+# Xilinx ZYNQ U-Boot
+#
+# (C) Copyright 2013 Xilinx, Inc.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+1. About this
+
+This document describes the information about Xilinx Zynq U-Boot -
+like supported boards, ML status and TODO list.
+
+2. Zynq boards
+
+Xilinx Zynq-7000 All Programmable SoCs enable extensive system level
+differentiation, integration, and flexibility through hardware, software,
+and I/O programmability.
+
+* zc70x
+ - zc702 (single qspi, gem0, mmc) [1]
+ - zc706 (dual parallel qspi, gem0, mmc) [2]
+* zed (single qspi, gem0, mmc) [3]
+* microzed (single qspi, gem0, mmc) [4]
+* zc770
+ - zc770-xm010 (single qspi, gem0, mmc)
+ - zc770-xm011 (8 or 16 bit nand)
+ - zc770-xm012 (nor)
+ - zc770-xm013 (dual parallel qspi, gem1)
+
+3. Building
+
+ # Configure for zc70x board
+ $ make zynq_zc70x_config
+ Configuring for zynq_zc70x board...
+
+ # Building default dts for zc702 board
+ $ make
+
+ # Building specified dts for zc706 board
+ $ make DEVICE_TREE=zynq-zc706
+
+4. Bootmode
+
+Zynq has a facility to read the bootmode from the slcr bootmode register
+once user is setting through jumpers on the board - see page no:1546 on [5]
+
+All possible bootmode values are defined in Table 6-2:Boot_Mode MIO Pins
+on [5].
+
+board_late_init() will read the bootmode values using slcr bootmode register
+at runtime and assign the modeboot variable to specific bootmode string which
+is intern used in autoboot.
+
+SLCR bootmode register Bit[3:0] values
+#define ZYNQ_BM_NOR 0x02
+#define ZYNQ_BM_SD 0x05
+#define ZYNQ_BM_JTAG 0x0
+
+"modeboot" variable can assign any of "norboot", "sdboot" or "jtagboot"
+bootmode strings at runtime.
+
+5. Mainline status
+
+- Added basic board configurations support.
+- Added zynq u-boot bsp code - arch/arm/cpu/armv7/zynq
+- Added zynq boards named - zc70x, zed, microzed, zc770_xm010, zc770_xm012, zc770_xm013
+- Added zynq drivers:
+ serial - drivers/serial/serial_zynq.c
+ net - drivers/net/zynq_gem.c
+ mmc - drivers/mmc/zynq_sdhci.c
+ mmc - drivers/mmc/zynq_sdhci.c
+ spi- drivers/spi/zynq_spi.c
+ i2c - drivers/i2c/zynq_i2c.c
+- Done proper cleanups on board configurations
+- Added basic FDT support for zynq boards
+- d-cache support for zynq_gem.c
+
+6. TODO
+
+- Add zynq boards support - zc770_xm011
+- Add zynq qspi controller driver
+- Add zynq nand controller driver
+- Add FDT support on individual drivers
+
+[1] http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC702-G.htm
+[2] http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC706-G.htm
+[3] http://zedboard.org/product/zedboard
+[4] http://zedboard.org/product/microzed
+[5] http://www.xilinx.com/support/documentation/user_guides/ug585-Zynq-7000-TRM.pdf
+
+--
+Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
+Sun Dec 15 14:52:41 IST 2013
diff --git a/doc/SPI/README.sh_qspi_test b/doc/SPI/README.sh_qspi_test
new file mode 100644
index 0000000..8a33fec
--- /dev/null
+++ b/doc/SPI/README.sh_qspi_test
@@ -0,0 +1,38 @@
+-------------------------------------------------
+ Simple steps used to test the SH-QSPI at U-Boot
+-------------------------------------------------
+
+#0, Currently, SH-QSPI is used by lager board (Renesas ARM SoC R8A7790)
+ and koelsch board (Renesas ARM SoC R8A7791). These boot from SPI ROM
+ basically. Thus, U-Boot start, SH-QSPI will is operating normally.
+
+#1, build U-Boot and load u-boot.bin
+
+ => tftpboot 40000000 u-boot.bin
+ sh_eth Waiting for PHY auto negotiation to complete.. done
+ sh_eth: 100Base/Half
+ Using sh_eth device
+ TFTP from server 192.168.169.1; our IP address is 192.168.169.79
+ Filename 'u-boot.bin'.
+ Load address: 0x40000000
+ Loading: ############
+ 2.5 MiB/s
+ done
+ Bytes transferred = 175364 (2ad04 hex)
+
+#2, Commands to erase/write u-boot to flash device
+
+ Note: This method is description of the lager board. If you want to use the
+ other boards, please change the value according to each environment.
+
+ => sf probe 0
+ SF: Detected S25FL512S_256K with page size 512 Bytes, erase size 64 KiB, total 64 MiB
+ => sf erase 80000 40000
+ SF: 262144 bytes @ 0x80000 Erased: OK
+ => sf write 40000000 80000 175364
+ SF: 1528676 bytes @ 0x80000 Written: OK
+ =>
+
+#3, Push reset button.
+
+ If you're written correctly and driver works properly, U-Boot starts.
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index 4e94378..8697da4 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -18,5 +18,6 @@
obj-$(CONFIG_SATA_SIL3114) += sata_sil3114.o
obj-$(CONFIG_SATA_SIL) += sata_sil.o
obj-$(CONFIG_IDE_SIL680) += sil680.o
+obj-$(CONFIG_SANDBOX) += sandbox.o
obj-$(CONFIG_SCSI_SYM53C8XX) += sym53c8xx.o
obj-$(CONFIG_SYSTEMACE) += systemace.o
diff --git a/drivers/block/sandbox.c b/drivers/block/sandbox.c
new file mode 100644
index 0000000..73f4c4a
--- /dev/null
+++ b/drivers/block/sandbox.c
@@ -0,0 +1,124 @@
+/*
+ * Copyright (C) 2013 Henrik Nordstrom <henrik@henriknordstrom.net>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
+#include <common.h>
+#include <part.h>
+#include <os.h>
+#include <malloc.h>
+#include <sandboxblockdev.h>
+#include <asm/errno.h>
+
+static struct host_block_dev host_devices[CONFIG_HOST_MAX_DEVICES];
+
+static struct host_block_dev *find_host_device(int dev)
+{
+ if (dev >= 0 && dev < CONFIG_HOST_MAX_DEVICES)
+ return &host_devices[dev];
+
+ return NULL;
+}
+
+static unsigned long host_block_read(int dev, unsigned long start,
+ lbaint_t blkcnt, void *buffer)
+{
+ struct host_block_dev *host_dev = find_host_device(dev);
+
+ if (!host_dev)
+ return -1;
+ if (os_lseek(host_dev->fd,
+ start * host_dev->blk_dev.blksz,
+ OS_SEEK_SET) == -1) {
+ printf("ERROR: Invalid position\n");
+ return -1;
+ }
+ ssize_t len = os_read(host_dev->fd, buffer,
+ blkcnt * host_dev->blk_dev.blksz);
+ if (len >= 0)
+ return len / host_dev->blk_dev.blksz;
+ return -1;
+}
+
+static unsigned long host_block_write(int dev, unsigned long start,
+ lbaint_t blkcnt, const void *buffer)
+{
+ struct host_block_dev *host_dev = find_host_device(dev);
+ if (os_lseek(host_dev->fd,
+ start * host_dev->blk_dev.blksz,
+ OS_SEEK_SET) == -1) {
+ printf("ERROR: Invalid position\n");
+ return -1;
+ }
+ ssize_t len = os_write(host_dev->fd, buffer, blkcnt *
+ host_dev->blk_dev.blksz);
+ if (len >= 0)
+ return len / host_dev->blk_dev.blksz;
+ return -1;
+}
+
+int host_dev_bind(int dev, char *filename)
+{
+ struct host_block_dev *host_dev = find_host_device(dev);
+
+ if (!host_dev)
+ return -1;
+ if (host_dev->blk_dev.priv) {
+ os_close(host_dev->fd);
+ host_dev->blk_dev.priv = NULL;
+ }
+ if (host_dev->filename)
+ free(host_dev->filename);
+ if (filename && *filename) {
+ host_dev->filename = strdup(filename);
+ } else {
+ host_dev->filename = NULL;
+ return 0;
+ }
+
+ host_dev->fd = os_open(host_dev->filename, OS_O_RDWR);
+ if (host_dev->fd == -1) {
+ printf("Failed to access host backing file '%s'\n",
+ host_dev->filename);
+ return 1;
+ }
+
+ block_dev_desc_t *blk_dev = &host_dev->blk_dev;
+ blk_dev->if_type = IF_TYPE_HOST;
+ blk_dev->priv = host_dev;
+ blk_dev->blksz = 512;
+ blk_dev->lba = os_lseek(host_dev->fd, 0, OS_SEEK_END) / blk_dev->blksz;
+ blk_dev->block_read = host_block_read;
+ blk_dev->block_write = host_block_write;
+ blk_dev->dev = dev;
+ blk_dev->part_type = PART_TYPE_UNKNOWN;
+ init_part(blk_dev);
+
+ return 0;
+}
+
+int host_get_dev_err(int dev, block_dev_desc_t **blk_devp)
+{
+ struct host_block_dev *host_dev = find_host_device(dev);
+
+ if (!host_dev)
+ return -ENODEV;
+
+ if (!host_dev->blk_dev.priv)
+ return -ENOENT;
+
+ *blk_devp = &host_dev->blk_dev;
+ return 0;
+}
+
+block_dev_desc_t *host_get_dev(int dev)
+{
+ block_dev_desc_t *blk_dev;
+
+ if (host_get_dev_err(dev, &blk_dev))
+ return NULL;
+
+ return blk_dev;
+}
diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c
index 1eb92e5..07011e9 100644
--- a/drivers/dfu/dfu.c
+++ b/drivers/dfu/dfu.c
@@ -74,6 +74,11 @@
return dfu_buf;
}
+unsigned long dfu_get_buf_size(void)
+{
+ return dfu_buf_size;
+}
+
unsigned char *dfu_get_buf(void)
{
char *s;
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 1ed26ca..e793ed9 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -28,6 +28,7 @@
obj-$(CONFIG_DWMMC) += dw_mmc.o
obj-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o
obj-$(CONFIG_ZYNQ_SDHCI) += zynq_sdhci.o
+obj-$(CONFIG_SOCFPGA_DWMMC) += socfpga_dw_mmc.o
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_SPL_MMC_BOOT) += fsl_esdhc_spl.o
else
diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c
old mode 100644
new mode 100755
index 19d9b0b..4cec5aa
--- a/drivers/mmc/dw_mmc.c
+++ b/drivers/mmc/dw_mmc.c
@@ -6,6 +6,7 @@
* SPDX-License-Identifier: GPL-2.0+
*/
+#include <bouncebuf.h>
#include <common.h>
#include <malloc.h>
#include <mmc.h>
@@ -41,11 +42,13 @@
}
static void dwmci_prepare_data(struct dwmci_host *host,
- struct mmc_data *data, struct dwmci_idmac *cur_idmac)
+ struct mmc_data *data,
+ struct dwmci_idmac *cur_idmac,
+ void *bounce_buffer)
{
unsigned long ctrl;
unsigned int i = 0, flags, cnt, blk_cnt;
- ulong data_start, data_end, start_addr;
+ ulong data_start, data_end;
blk_cnt = data->blocks;
@@ -55,11 +58,6 @@
data_start = (ulong)cur_idmac;
dwmci_writel(host, DWMCI_DBADDR, (unsigned int)cur_idmac);
- if (data->flags == MMC_DATA_READ)
- start_addr = (unsigned int)data->dest;
- else
- start_addr = (unsigned int)data->src;
-
do {
flags = DWMCI_IDMAC_OWN | DWMCI_IDMAC_CH ;
flags |= (i == 0) ? DWMCI_IDMAC_FS : 0;
@@ -70,7 +68,7 @@
cnt = data->blocksize * 8;
dwmci_set_idma_desc(cur_idmac, flags, cnt,
- start_addr + (i * PAGE_SIZE));
+ (u32)bounce_buffer + (i * PAGE_SIZE));
if (blk_cnt <= 8)
break;
@@ -117,6 +115,7 @@
u32 retry = 10000;
u32 mask, ctrl;
ulong start = get_timer(0);
+ struct bounce_buffer bbstate;
while (dwmci_readl(host, DWMCI_STATUS) & DWMCI_BUSY) {
if (get_timer(start) > timeout) {
@@ -127,8 +126,19 @@
dwmci_writel(host, DWMCI_RINTSTS, DWMCI_INTMSK_ALL);
- if (data)
- dwmci_prepare_data(host, data, cur_idmac);
+ if (data) {
+ if (data->flags == MMC_DATA_READ) {
+ bounce_buffer_start(&bbstate, (void*)data->dest,
+ data->blocksize *
+ data->blocks, GEN_BB_WRITE);
+ } else {
+ bounce_buffer_start(&bbstate, (void*)data->src,
+ data->blocksize *
+ data->blocks, GEN_BB_READ);
+ }
+ dwmci_prepare_data(host, data, cur_idmac,
+ bbstate.bounce_buffer);
+ }
dwmci_writel(host, DWMCI_CMDARG, cmd->cmdarg);
@@ -204,6 +214,8 @@
ctrl = dwmci_readl(host, DWMCI_CTRL);
ctrl &= ~(DWMCI_DMA_EN);
dwmci_writel(host, DWMCI_CTRL, ctrl);
+
+ bounce_buffer_stop(&bbstate);
}
udelay(100);
@@ -336,9 +348,9 @@
struct mmc *mmc;
int err = 0;
- mmc = malloc(sizeof(struct mmc));
+ mmc = calloc(sizeof(struct mmc), 1);
if (!mmc) {
- printf("mmc malloc fail!\n");
+ printf("mmc calloc fail!\n");
return -1;
}
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index e1461a9..c6a1c23 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -877,6 +877,7 @@
mmc->tran_speed = freq * mult;
+ mmc->dsr_imp = ((cmd.response[1] >> 12) & 0x1);
mmc->read_bl_len = 1 << ((cmd.response[1] >> 16) & 0xf);
if (IS_SD(mmc))
@@ -907,6 +908,14 @@
if (mmc->write_bl_len > MMC_MAX_BLOCK_LEN)
mmc->write_bl_len = MMC_MAX_BLOCK_LEN;
+ if ((mmc->dsr_imp) && (0xffffffff != mmc->dsr)) {
+ cmd.cmdidx = MMC_CMD_SET_DSR;
+ cmd.cmdarg = (mmc->dsr & 0xffff) << 16;
+ cmd.resp_type = MMC_RSP_NONE;
+ if (mmc_send_cmd(mmc, &cmd, NULL))
+ printf("MMC: SET_DSR failed\n");
+ }
+
/* Select the card, and put it into Transfer Mode */
if (!mmc_host_is_spi(mmc)) { /* cmd not supported in spi */
cmd.cmdidx = MMC_CMD_SELECT_CARD;
@@ -1163,6 +1172,9 @@
int mmc_register(struct mmc *mmc)
{
+ /* Setup dsr related values */
+ mmc->dsr_imp = 0;
+ mmc->dsr = 0xffffffff;
/* Setup the universal parts of the block interface just once */
mmc->block_dev.if_type = IF_TYPE_MMC;
mmc->block_dev.dev = cur_dev_num++;
@@ -1280,6 +1292,12 @@
return err;
}
+int mmc_set_dsr(struct mmc *mmc, u16 val)
+{
+ mmc->dsr = val;
+ return 0;
+}
+
/*
* CPU and board-specific MMC initializations. Aliased function
* signals caller to move on
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 46ae9cb..1e86b92 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -24,7 +24,8 @@
sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) {
if (timeout == 0) {
- printf("Reset 0x%x never completed.\n", (int)mask);
+ printf("%s: Reset 0x%x never completed.\n",
+ __func__, (int)mask);
return;
}
timeout--;
@@ -79,7 +80,8 @@
do {
stat = sdhci_readl(host, SDHCI_INT_STATUS);
if (stat & SDHCI_INT_ERROR) {
- printf("Error detected in status(0x%X)!\n", stat);
+ printf("%s: Error detected in status(0x%X)!\n",
+ __func__, stat);
return -1;
}
if (stat & rdy) {
@@ -102,7 +104,7 @@
if (timeout-- > 0)
udelay(10);
else {
- printf("Transfer data timeout\n");
+ printf("%s: Transfer data timeout\n", __func__);
return -1;
}
} while (!(stat & SDHCI_INT_DATA_END));
@@ -147,7 +149,7 @@
while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
if (time >= cmd_timeout) {
- printf("MMC: %d busy ", mmc_dev);
+ printf("%s: MMC: %d busy ", __func__, mmc_dev);
if (2 * cmd_timeout <= CONFIG_SDHCI_CMD_MAX_TIMEOUT) {
cmd_timeout += cmd_timeout;
printf("timeout increasing to: %u ms.\n",
@@ -179,7 +181,7 @@
if (data)
flags |= SDHCI_CMD_DATA;
- /*Set Transfer mode regarding to data flag*/
+ /* Set Transfer mode regarding to data flag */
if (data != 0) {
sdhci_writeb(host, 0xe, SDHCI_TIMEOUT_CONTROL);
mode = SDHCI_TRNS_BLK_CNT_EN;
@@ -230,7 +232,7 @@
if (host->quirks & SDHCI_QUIRK_BROKEN_R1B)
return 0;
else {
- printf("Timeout for status update!\n");
+ printf("%s: Timeout for status update!\n", __func__);
return TIMEOUT;
}
}
@@ -307,7 +309,8 @@
while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
& SDHCI_CLOCK_INT_STABLE)) {
if (timeout == 0) {
- printf("Internal clock never stabilised.\n");
+ printf("%s: Internal clock never stabilised.\n",
+ __func__);
return -1;
}
timeout--;
@@ -397,7 +400,8 @@
if ((host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) && !aligned_buffer) {
aligned_buffer = memalign(8, 512*1024);
if (!aligned_buffer) {
- printf("Aligned buffer alloc failed!!!");
+ printf("%s: Aligned buffer alloc failed!!!\n",
+ __func__);
return -1;
}
}
@@ -418,8 +422,8 @@
}
/* Enable only interrupts served by the SD controller */
- sdhci_writel(host, SDHCI_INT_DATA_MASK | SDHCI_INT_CMD_MASK
- , SDHCI_INT_ENABLE);
+ sdhci_writel(host, SDHCI_INT_DATA_MASK | SDHCI_INT_CMD_MASK,
+ SDHCI_INT_ENABLE);
/* Mask all sdhci interrupt sources */
sdhci_writel(host, 0x0, SDHCI_SIGNAL_ENABLE);
@@ -433,7 +437,7 @@
mmc = malloc(sizeof(struct mmc));
if (!mmc) {
- printf("mmc malloc fail!\n");
+ printf("%s: mmc malloc fail!\n", __func__);
return -1;
}
@@ -450,7 +454,8 @@
caps = sdhci_readl(host, SDHCI_CAPABILITIES);
#ifdef CONFIG_MMC_SDMA
if (!(caps & SDHCI_CAN_DO_SDMA)) {
- printf("Your controller don't support sdma!!\n");
+ printf("%s: Your controller doesn't support SDMA!!\n",
+ __func__);
return -1;
}
#endif
@@ -467,7 +472,8 @@
mmc->f_max *= 1000000;
}
if (mmc->f_max == 0) {
- printf("Hardware doesn't specify base clock frequency\n");
+ printf("%s: Hardware doesn't specify base clock frequency\n",
+ __func__);
return -1;
}
if (min_clk)
diff --git a/drivers/mmc/socfpga_dw_mmc.c b/drivers/mmc/socfpga_dw_mmc.c
new file mode 100644
index 0000000..bc53a5d
--- /dev/null
+++ b/drivers/mmc/socfpga_dw_mmc.c
@@ -0,0 +1,68 @@
+/*
+ * (C) Copyright 2013 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <dwmmc.h>
+#include <asm/arch/dwmmc.h>
+#include <asm/arch/clock_manager.h>
+#include <asm/arch/system_manager.h>
+
+static const struct socfpga_clock_manager *clock_manager_base =
+ (void *)SOCFPGA_CLKMGR_ADDRESS;
+static const struct socfpga_system_manager *system_manager_base =
+ (void *)SOCFPGA_SYSMGR_ADDRESS;
+
+static char *SOCFPGA_NAME = "SOCFPGA DWMMC";
+
+static void socfpga_dwmci_clksel(struct dwmci_host *host)
+{
+ unsigned int drvsel;
+ unsigned int smplsel;
+
+ /* Disable SDMMC clock. */
+ clrbits_le32(&clock_manager_base->per_pll_en,
+ CLKMGR_PERPLLGRP_EN_SDMMCCLK_MASK);
+
+ /* Configures drv_sel and smpl_sel */
+ drvsel = CONFIG_SOCFPGA_DWMMC_DRVSEL;
+ smplsel = CONFIG_SOCFPGA_DWMMC_SMPSEL;
+
+ debug("%s: drvsel %d smplsel %d\n", __func__, drvsel, smplsel);
+ writel(SYSMGR_SDMMC_CTRL_SET(smplsel, drvsel),
+ &system_manager_base->sdmmcgrp_ctrl);
+
+ debug("%s: SYSMGR_SDMMCGRP_CTRL_REG = 0x%x\n", __func__,
+ readl(&system_manager_base->sdmmcgrp_ctrl));
+
+ /* Enable SDMMC clock */
+ setbits_le32(&clock_manager_base->per_pll_en,
+ CLKMGR_PERPLLGRP_EN_SDMMCCLK_MASK);
+}
+
+int socfpga_dwmmc_init(u32 regbase, int bus_width, int index)
+{
+ struct dwmci_host *host = NULL;
+ host = calloc(sizeof(struct dwmci_host), 1);
+ if (!host) {
+ printf("dwmci_host calloc fail!\n");
+ return -1;
+ }
+
+ host->name = SOCFPGA_NAME;
+ host->ioaddr = (void *)regbase;
+ host->buswidth = bus_width;
+ host->clksel = socfpga_dwmci_clksel;
+ host->dev_index = index;
+ /* fixed clock divide by 4 which due to the SDMMC wrapper */
+ host->bus_hz = CONFIG_SOCFPGA_DWMMC_BUS_HZ;
+ host->fifoth_val = MSIZE(0x2) |
+ RX_WMARK(CONFIG_SOCFPGA_DWMMC_FIFO_DEPTH / 2 - 1) |
+ TX_WMARK(CONFIG_SOCFPGA_DWMMC_FIFO_DEPTH / 2);
+
+ return add_dwmci(host, host->bus_hz, 400000);
+}
+
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index e145cd1..02b149c 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -5,8 +5,6 @@
# SPDX-License-Identifier: GPL-2.0+
#
-ifdef CONFIG_CMD_NAND
-
ifdef CONFIG_SPL_BUILD
ifdef CONFIG_SPL_NAND_DRIVERS
@@ -69,4 +67,3 @@
obj-$(CONFIG_NAND_MXC) += mxc_nand_spl.o
endif # drivers
-endif # nand
diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c
index eeaa7e8..b292826 100644
--- a/drivers/mtd/nand/nand_util.c
+++ b/drivers/mtd/nand/nand_util.c
@@ -315,7 +315,7 @@
int page;
struct nand_chip *chip = mtd->priv;
- debug("nand_unlock%s: start: %08llx, length: %d!\n",
+ debug("nand_unlock%s: start: %08llx, length: %zd!\n",
allexcept ? " (allexcept)" : "", start, length);
/* select the NAND device */
diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
index 5e7e6b3..790d538 100644
--- a/drivers/mtd/nand/omap_gpmc.c
+++ b/drivers/mtd/nand/omap_gpmc.c
@@ -283,53 +283,55 @@
if (bch->ecc_scheme == OMAP_ECC_BCH8_CODE_HW) {
wr_mode = BCH_WRAPMODE_1;
- switch (bch->nibbles) {
- case ECC_BCH4_NIBBLES:
- unused_length = 3;
- break;
- case ECC_BCH8_NIBBLES:
- unused_length = 2;
- break;
- case ECC_BCH16_NIBBLES:
- unused_length = 0;
- break;
- }
+ switch (bch->nibbles) {
+ case ECC_BCH4_NIBBLES:
+ unused_length = 3;
+ break;
+ case ECC_BCH8_NIBBLES:
+ unused_length = 2;
+ break;
+ case ECC_BCH16_NIBBLES:
+ unused_length = 0;
+ break;
+ }
- /*
- * This is ecc_size_config for ELM mode.
- * Here we are using different settings for read and write access and
- * also depending on BCH strength.
- */
- switch (mode) {
- case NAND_ECC_WRITE:
- /* write access only setup eccsize1 config */
- val = ((unused_length + bch->nibbles) << 22);
- break;
-
- case NAND_ECC_READ:
- default:
/*
- * by default eccsize0 selected for ecc1resultsize
- * eccsize0 config.
+ * This is ecc_size_config for ELM mode. Here we are using
+ * different settings for read and write access and also
+ * depending on BCH strength.
*/
- val = (bch->nibbles << 12);
- /* eccsize1 config */
- val |= (unused_length << 22);
- break;
- }
+ switch (mode) {
+ case NAND_ECC_WRITE:
+ /* write access only setup eccsize1 config */
+ val = ((unused_length + bch->nibbles) << 22);
+ break;
+
+ case NAND_ECC_READ:
+ default:
+ /*
+ * by default eccsize0 selected for ecc1resultsize
+ * eccsize0 config.
+ */
+ val = (bch->nibbles << 12);
+ /* eccsize1 config */
+ val |= (unused_length << 22);
+ break;
+ }
} else {
- /*
- * This ecc_size_config setting is for BCH sw library.
- *
- * Note: we only support BCH8 currently with BCH sw library!
- * Should be really easy to adobt to BCH4, however some omap3 have
- * flaws with BCH4.
- *
- * Here we are using wrapping mode 6 both for reading and writing, with:
- * size0 = 0 (no additional protected byte in spare area)
- * size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
- */
- val = (32 << 22) | (0 << 12);
+ /*
+ * This ecc_size_config setting is for BCH sw library.
+ *
+ * Note: we only support BCH8 currently with BCH sw library!
+ * Should be really easy to adobt to BCH4, however some omap3
+ * have flaws with BCH4.
+ *
+ * Here we are using wrapping mode 6 both for reading and
+ * writing, with:
+ * size0 = 0 (no additional protected byte in spare area)
+ * size1 = 32 (skip 32 nibbles = 16 bytes per sector in
+ * spare area)
+ */
+ val = (32 << 22) | (0 << 12);
}
/* ecc size configuration */
writel(val, &gpmc_cfg->ecc_size_config);
@@ -761,7 +763,7 @@
static int omap_select_ecc_scheme(struct nand_chip *nand,
enum omap_ecc ecc_scheme, unsigned int pagesize, unsigned int oobsize) {
struct nand_bch_priv *bch = nand->priv;
- struct nand_ecclayout *ecclayout = nand->ecc.layout;
+ struct nand_ecclayout *ecclayout = &omap_ecclayout;
int eccsteps = pagesize / SECTOR_BYTES;
int i;
@@ -774,7 +776,7 @@
bch_priv.type = 0;
nand->ecc.mode = NAND_ECC_SOFT;
nand->ecc.layout = NULL;
- nand->ecc.size = pagesize;
+ nand->ecc.size = 0;
bch->ecc_scheme = OMAP_ECC_HAM1_CODE_SW;
break;
@@ -789,6 +791,7 @@
bch_priv.control = NULL;
bch_priv.type = 0;
/* populate ecc specific fields */
+ memset(&nand->ecc, 0, sizeof(struct nand_ecc_ctrl));
nand->ecc.mode = NAND_ECC_HW;
nand->ecc.strength = 1;
nand->ecc.size = SECTOR_BYTES;
@@ -798,8 +801,12 @@
nand->ecc.calculate = omap_calculate_ecc;
/* define ecc-layout */
ecclayout->eccbytes = nand->ecc.bytes * eccsteps;
- for (i = 0; i < ecclayout->eccbytes; i++)
- ecclayout->eccpos[i] = i + BADBLOCK_MARKER_LENGTH;
+ for (i = 0; i < ecclayout->eccbytes; i++) {
+ if (nand->options & NAND_BUSWIDTH_16)
+ ecclayout->eccpos[i] = i + 2;
+ else
+ ecclayout->eccpos[i] = i + 1;
+ }
ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH;
ecclayout->oobfree[0].length = oobsize - ecclayout->eccbytes -
BADBLOCK_MARKER_LENGTH;
@@ -823,6 +830,7 @@
}
bch_priv.type = ECC_BCH8;
/* populate ecc specific fields */
+ memset(&nand->ecc, 0, sizeof(struct nand_ecc_ctrl));
nand->ecc.mode = NAND_ECC_HW;
nand->ecc.strength = 8;
nand->ecc.size = SECTOR_BYTES;
@@ -865,6 +873,7 @@
elm_init();
bch_priv.type = ECC_BCH8;
/* populate ecc specific fields */
+ memset(&nand->ecc, 0, sizeof(struct nand_ecc_ctrl));
nand->ecc.mode = NAND_ECC_HW;
nand->ecc.strength = 8;
nand->ecc.size = SECTOR_BYTES;
@@ -891,6 +900,11 @@
debug("nand: error: ecc scheme not enabled or supported\n");
return -EINVAL;
}
+
+ /* nand_scan_tail() sets ham1 sw ecc; hw ecc layout is set by driver */
+ if (ecc_scheme != OMAP_ECC_HAM1_CODE_SW)
+ nand->ecc.layout = ecclayout;
+
return 0;
}
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 979e4af..e33e8d3 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -91,7 +91,13 @@
.oobfree = { {2, 3}, {14, 2}, {18, 3}, {30, 2} }
};
-static const unsigned char ffchars[] = {
+/*
+ * Warning! This array is used with the memcpy_16() function, thus
+ * it must be aligned to 2 bytes. GCC can make this array unaligned
+ * as the array is made of unsigned char, which memcpy16() doesn't
+ * like and will cause unaligned access.
+ */
+static const unsigned char __aligned(2) ffchars[] = {
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 16 */
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c
index 108665f..e316a69 100644
--- a/drivers/mtd/spi/sf_ops.c
+++ b/drivers/mtd/spi/sf_ops.c
@@ -273,9 +273,15 @@
/* Handle memory-mapped SPI */
if (flash->memory_map) {
+ ret = spi_claim_bus(flash->spi);
+ if (ret) {
+ debug("SF: unable to claim SPI bus\n");
+ return ret;
+ }
spi_xfer(flash->spi, 0, NULL, NULL, SPI_XFER_MMAP);
memcpy(data, flash->memory_map + offset, len);
spi_xfer(flash->spi, 0, NULL, NULL, SPI_XFER_MMAP_END);
+ spi_release_bus(flash->spi);
return 0;
}
diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
index c1eb754..b863a98 100644
--- a/drivers/mtd/spi/sf_probe.c
+++ b/drivers/mtd/spi/sf_probe.c
@@ -60,6 +60,7 @@
{"GD25LQ32", 0xc86016, 0x0, 64 * 1024, 64, SECT_4K},
#endif
#ifdef CONFIG_SPI_FLASH_MACRONIX /* MACRONIX */
+ {"MX25L2006E", 0xc22012, 0x0, 64 * 1024, 4, 0},
{"MX25L4005", 0xc22013, 0x0, 64 * 1024, 8, 0},
{"MX25L8005", 0xc22014, 0x0, 64 * 1024, 16, 0},
{"MX25L1605D", 0xc22015, 0x0, 64 * 1024, 32, 0},
@@ -67,7 +68,7 @@
{"MX25L6405D", 0xc22017, 0x0, 64 * 1024, 128, 0},
{"MX25L12805", 0xc22018, 0x0, 64 * 1024, 256, 0},
{"MX25L25635F", 0xc22019, 0x0, 64 * 1024, 512, 0},
- {"MX25L51235F", 0xc2201A, 0x0, 64 * 1024, 1024, 0},
+ {"MX25L51235F", 0xc2201a, 0x0, 64 * 1024, 1024, 0},
{"MX25L12855E", 0xc22618, 0x0, 64 * 1024, 256, 0},
#endif
#ifdef CONFIG_SPI_FLASH_SPANSION /* SPANSION */
diff --git a/drivers/mtd/ubi/Makefile b/drivers/mtd/ubi/Makefile
index e1f3a24..56c2823 100644
--- a/drivers/mtd/ubi/Makefile
+++ b/drivers/mtd/ubi/Makefile
@@ -5,9 +5,6 @@
# SPDX-License-Identifier: GPL-2.0+
#
-ifdef CONFIG_CMD_UBI
obj-y += build.o vtbl.o vmt.o upd.o kapi.o eba.o io.o wl.o scan.o crc32.o
-
obj-y += misc.o
obj-y += debug.o
-endif
diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c
index cd787f4..74c72d3 100644
--- a/drivers/net/fm/init.c
+++ b/drivers/net/fm/init.c
@@ -276,13 +276,64 @@
"status", "disabled", strlen("disabled") + 1, 1);
}
+#ifdef CONFIG_SYS_FMAN_V3
+static int ft_fixup_xgec(void *blob, struct fm_eth_info *info)
+{
+ int off, i, ci;
+#define FM1_10GEC3_RX_PORT_ADDR (CONFIG_SYS_CCSRBAR_PHYS + 0x488000)
+#define FM1_10GEC3_TX_PORT_ADDR (CONFIG_SYS_CCSRBAR_PHYS + 0x4a8000)
+#define FM1_10GEC3_MAC_ADDR (CONFIG_SYS_CCSRBAR_PHYS + 0x4e0000)
+
+ if ((info->port == FM1_10GEC3) || (info->port == FM1_10GEC4)) {
+ ci = (info->port == FM1_10GEC3) ? 2 : 3;
+ i = (info->port == FM1_10GEC3) ? 0 : 1;
+
+ off = fdt_node_offset_by_compat_reg(blob, "fsl,fman-port-1g-rx",
+ FM1_10GEC3_RX_PORT_ADDR +
+ i * 0x1000);
+ if (off > 0) {
+ fdt_setprop(blob, off, "cell-index", &ci, sizeof(int));
+ fdt_setprop(blob, off, "compatible",
+ "fsl,fman-port-10g-rx", 20);
+ } else {
+ goto err;
+ }
+
+ off = fdt_node_offset_by_compat_reg(blob, "fsl,fman-port-1g-tx",
+ FM1_10GEC3_TX_PORT_ADDR +
+ i * 0x1000);
+ if (off > 0) {
+ fdt_setprop(blob, off, "cell-index", &ci, sizeof(int));
+ fdt_setprop(blob, off, "compatible",
+ "fsl,fman-port-10g-tx", 20);
+ } else {
+ goto err;
+ }
+
+ off = fdt_node_offset_by_compat_reg(blob, "fsl,fman-memac",
+ FM1_10GEC3_MAC_ADDR +
+ i * 0x2000);
+ if (off > 0)
+ fdt_setprop(blob, off, "cell-index", &ci, sizeof(int));
+ else
+ goto err;
+ }
+ return 0;
+err:
+ printf("WARNING: Fail to find the node\n");
+ return -1;
+}
+#endif
+
void fdt_fixup_fman_ethernet(void *blob)
{
int i;
#ifdef CONFIG_SYS_FMAN_V3
- for (i = 0; i < ARRAY_SIZE(fm_info); i++)
+ for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
ft_fixup_port(blob, &fm_info[i], "fsl,fman-memac");
+ ft_fixup_xgec(blob, &fm_info[i]);
+ }
#else
for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
if (fm_info[i].type == FM_ETH_1G_E)
diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h
index 8aa7109..331c07c 100644
--- a/drivers/net/sh_eth.h
+++ b/drivers/net/sh_eth.h
@@ -287,7 +287,9 @@
#if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734)
#define SH_ETH_TYPE_GETHER
#define BASE_IO_ADDR 0xfee00000
-#elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
+#elif defined(CONFIG_CPU_SH7757) || \
+ defined(CONFIG_CPU_SH7752) || \
+ defined(CONFIG_CPU_SH7753)
#if defined(CONFIG_SH_ETHER_USE_GETHER)
#define SH_ETH_TYPE_GETHER
#define BASE_IO_ADDR 0xfee00000
@@ -356,7 +358,9 @@
/* GECMR */
enum GECMR_BIT {
-#if defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
+#if defined(CONFIG_CPU_SH7757) || \
+ defined(CONFIG_CPU_SH7752) || \
+ defined(CONFIG_CPU_SH7753)
GECMR_1000B = 0x20, GECMR_100B = 0x01, GECMR_10B = 0x00,
#else
GECMR_1000B = 0x01, GECMR_100B = 0x04, GECMR_10B = 0x00,
diff --git a/drivers/serial/lpc32xx_hsuart.c b/drivers/serial/lpc32xx_hsuart.c
index 9c7c621..c8926a8 100644
--- a/drivers/serial/lpc32xx_hsuart.c
+++ b/drivers/serial/lpc32xx_hsuart.c
@@ -38,6 +38,9 @@
static void lpc32xx_serial_putc(const char c)
{
+ if (c == '\n')
+ serial_putc('\r');
+
writel(c, &hsuart->tx);
/* Wait for character to be sent */
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 181c818..fbc37b2 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -56,9 +56,8 @@
;
serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
-#if (defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)) || \
- defined(CONFIG_AM33XX) || defined(CONFIG_TI81XX) || \
- defined(CONFIG_AM43XX)
+#if defined(CONFIG_OMAP) || defined(CONFIG_AM33XX) || \
+ defined(CONFIG_TI81XX) || defined(CONFIG_AM43XX)
serial_out(0x7, &com_port->mdr1); /* mode select reset TL16C750*/
#endif
serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr);
diff --git a/drivers/serial/serial_sh.h b/drivers/serial/serial_sh.h
index 556b868..f5e9854 100644
--- a/drivers/serial/serial_sh.h
+++ b/drivers/serial/serial_sh.h
@@ -143,7 +143,9 @@
#elif defined(CONFIG_H8S2678)
# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
# define H8300_SCI_DR(ch) (*(volatile char *)(P1DR + h8300_sci_pins[ch].port))
-#elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
+#elif defined(CONFIG_CPU_SH7757) || \
+ defined(CONFIG_CPU_SH7752) || \
+ defined(CONFIG_CPU_SH7753)
# define SCSPTR0 0xfe4b0020
# define SCSPTR1 0xfe4b0020
# define SCSPTR2 0xfe4b0020
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index ed4ecd7..d5a7143 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -30,6 +30,7 @@
obj-$(CONFIG_SANDBOX_SPI) += sandbox_spi.o
obj-$(CONFIG_SOFT_SPI) += soft_spi.o
obj-$(CONFIG_SH_SPI) += sh_spi.o
+obj-$(CONFIG_SH_QSPI) += sh_qspi.o
obj-$(CONFIG_FSL_ESPI) += fsl_espi.o
obj-$(CONFIG_FDT_SPI) += fdt_spi.o
obj-$(CONFIG_TEGRA20_SFLASH) += tegra20_sflash.o
diff --git a/drivers/spi/sh_qspi.c b/drivers/spi/sh_qspi.c
new file mode 100644
index 0000000..edeb42d
--- /dev/null
+++ b/drivers/spi/sh_qspi.c
@@ -0,0 +1,277 @@
+/*
+ * SH QSPI (Quad SPI) driver
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ * Copyright (C) 2013 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <spi.h>
+#include <asm/io.h>
+
+/* SH QSPI register bit masks <REG>_<BIT> */
+#define SPCR_MSTR 0x08
+#define SPCR_SPE 0x40
+#define SPSR_SPRFF 0x80
+#define SPSR_SPTEF 0x20
+#define SPPCR_IO3FV 0x04
+#define SPPCR_IO2FV 0x02
+#define SPPCR_IO1FV 0x01
+#define SPBDCR_RXBC0 (1 << 0)
+#define SPCMD_SCKDEN (1 << 15)
+#define SPCMD_SLNDEN (1 << 14)
+#define SPCMD_SPNDEN (1 << 13)
+#define SPCMD_SSLKP (1 << 7)
+#define SPCMD_BRDV0 (1 << 2)
+#define SPCMD_INIT1 SPCMD_SCKDEN | SPCMD_SLNDEN | \
+ SPCMD_SPNDEN | SPCMD_SSLKP | \
+ SPCMD_BRDV0
+#define SPCMD_INIT2 SPCMD_SPNDEN | SPCMD_SSLKP | \
+ SPCMD_BRDV0
+#define SPBFCR_TXRST (1 << 7)
+#define SPBFCR_RXRST (1 << 6)
+
+/* SH QSPI register set */
+struct sh_qspi_regs {
+ unsigned char spcr;
+ unsigned char sslp;
+ unsigned char sppcr;
+ unsigned char spsr;
+ unsigned long spdr;
+ unsigned char spscr;
+ unsigned char spssr;
+ unsigned char spbr;
+ unsigned char spdcr;
+ unsigned char spckd;
+ unsigned char sslnd;
+ unsigned char spnd;
+ unsigned char dummy0;
+ unsigned short spcmd0;
+ unsigned short spcmd1;
+ unsigned short spcmd2;
+ unsigned short spcmd3;
+ unsigned char spbfcr;
+ unsigned char dummy1;
+ unsigned short spbdcr;
+ unsigned long spbmul0;
+ unsigned long spbmul1;
+ unsigned long spbmul2;
+ unsigned long spbmul3;
+};
+
+struct sh_qspi_slave {
+ struct spi_slave slave;
+ struct sh_qspi_regs *regs;
+};
+
+static inline struct sh_qspi_slave *to_sh_qspi(struct spi_slave *slave)
+{
+ return container_of(slave, struct sh_qspi_slave, slave);
+}
+
+static void sh_qspi_init(struct sh_qspi_slave *ss)
+{
+ /* QSPI initialize */
+ /* Set master mode only */
+ writeb(SPCR_MSTR, &ss->regs->spcr);
+
+ /* Set SSL signal level */
+ writeb(0x00, &ss->regs->sslp);
+
+ /* Set MOSI signal value when transfer is in idle state */
+ writeb(SPPCR_IO3FV|SPPCR_IO2FV, &ss->regs->sppcr);
+
+ /* Set bit rate. See 58.3.8 Quad Serial Peripheral Interface */
+ writeb(0x01, &ss->regs->spbr);
+
+ /* Disable Dummy Data Transmission */
+ writeb(0x00, &ss->regs->spdcr);
+
+ /* Set clock delay value */
+ writeb(0x00, &ss->regs->spckd);
+
+ /* Set SSL negation delay value */
+ writeb(0x00, &ss->regs->sslnd);
+
+ /* Set next-access delay value */
+ writeb(0x00, &ss->regs->spnd);
+
+ /* Set equence command */
+ writew(SPCMD_INIT2, &ss->regs->spcmd0);
+
+ /* Reset transfer and receive Buffer */
+ setbits_8(&ss->regs->spbfcr, SPBFCR_TXRST|SPBFCR_RXRST);
+
+ /* Clear transfer and receive Buffer control bit */
+ clrbits_8(&ss->regs->spbfcr, SPBFCR_TXRST|SPBFCR_RXRST);
+
+ /* Set equence control method. Use equence0 only */
+ writeb(0x00, &ss->regs->spscr);
+
+ /* Enable SPI function */
+ setbits_8(&ss->regs->spcr, SPCR_SPE);
+}
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ return 1;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+ struct sh_qspi_slave *ss = to_sh_qspi(slave);
+
+ /* Set master mode only */
+ writeb(SPCR_MSTR, &ss->regs->spcr);
+
+ /* Set command */
+ writew(SPCMD_INIT1, &ss->regs->spcmd0);
+
+ /* Reset transfer and receive Buffer */
+ setbits_8(&ss->regs->spbfcr, SPBFCR_TXRST|SPBFCR_RXRST);
+
+ /* Clear transfer and receive Buffer control bit */
+ clrbits_8(&ss->regs->spbfcr, SPBFCR_TXRST|SPBFCR_RXRST);
+
+ /* Set equence control method. Use equence0 only */
+ writeb(0x00, &ss->regs->spscr);
+
+ /* Enable SPI function */
+ setbits_8(&ss->regs->spcr, SPCR_SPE);
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ struct sh_qspi_slave *ss = to_sh_qspi(slave);
+
+ /* Disable SPI Function */
+ clrbits_8(&ss->regs->spcr, SPCR_SPE);
+}
+
+void spi_init(void)
+{
+ /* nothing to do */
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct sh_qspi_slave *ss;
+
+ if (!spi_cs_is_valid(bus, cs))
+ return NULL;
+
+ ss = spi_alloc_slave(struct sh_qspi_slave, bus, cs);
+ if (!ss) {
+ printf("SPI_error: Fail to allocate sh_qspi_slave\n");
+ return NULL;
+ }
+
+ ss->regs = (struct sh_qspi_regs *)CONFIG_SH_QSPI_BASE;
+
+ /* Init SH QSPI */
+ sh_qspi_init(ss);
+
+ return &ss->slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+ struct sh_qspi_slave *spi = to_sh_qspi(slave);
+
+ free(spi);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+ return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
+ void *din, unsigned long flags)
+{
+ struct sh_qspi_slave *ss = to_sh_qspi(slave);
+ unsigned long nbyte;
+ int ret = 0;
+ unsigned char dtdata = 0, drdata;
+ unsigned char *tdata = &dtdata, *rdata = &drdata;
+ unsigned long *spbmul0 = &ss->regs->spbmul0;
+
+ if (dout == NULL && din == NULL) {
+ if (flags & SPI_XFER_END)
+ spi_cs_deactivate(slave);
+ return 0;
+ }
+
+ if (bitlen % 8) {
+ printf("%s: bitlen is not 8bit alined %d", __func__, bitlen);
+ return 1;
+ }
+
+ nbyte = bitlen / 8;
+
+ if (flags & SPI_XFER_BEGIN) {
+ spi_cs_activate(slave);
+
+ /* Set 1048576 byte */
+ writel(0x100000, spbmul0);
+ }
+
+ if (flags & SPI_XFER_END)
+ writel(nbyte, spbmul0);
+
+ if (dout != NULL)
+ tdata = (unsigned char *)dout;
+
+ if (din != NULL)
+ rdata = din;
+
+ while (nbyte > 0) {
+ while (!(readb(&ss->regs->spsr) & SPSR_SPTEF)) {
+ if (ctrlc()) {
+ puts("abort\n");
+ return 1;
+ }
+ udelay(10);
+ }
+
+ writeb(*tdata, (unsigned char *)(&ss->regs->spdr));
+
+ while ((readw(&ss->regs->spbdcr) != SPBDCR_RXBC0)) {
+ if (ctrlc()) {
+ puts("abort\n");
+ return 1;
+ }
+ udelay(1);
+ }
+
+ while (!(readb(&ss->regs->spsr) & SPSR_SPRFF)) {
+ if (ctrlc()) {
+ puts("abort\n");
+ return 1;
+ }
+ udelay(10);
+ }
+
+ *rdata = readb((unsigned char *)(&ss->regs->spdr));
+
+ if (dout != NULL)
+ tdata++;
+ if (din != NULL)
+ rdata++;
+
+ nbyte--;
+ }
+
+ if (flags & SPI_XFER_END)
+ spi_cs_deactivate(slave);
+
+ return ret;
+}
diff --git a/drivers/spi/tegra114_spi.c b/drivers/spi/tegra114_spi.c
index 4d2af48..810fa47 100644
--- a/drivers/spi/tegra114_spi.c
+++ b/drivers/spi/tegra114_spi.c
@@ -289,9 +289,6 @@
reg = readl(®s->fifo_status);
writel(reg, ®s->fifo_status);
- /* clear ready bit */
- setbits_le32(®s->xfer_status, SPI_XFER_STS_RDY);
-
clrsetbits_le32(®s->command1, SPI_CMD1_CS_SW_VAL,
SPI_CMD1_RX_EN | SPI_CMD1_TX_EN | SPI_CMD1_LSBY_FE |
(slave->cs << SPI_CMD1_CS_SEL_SHIFT));
@@ -305,7 +302,6 @@
/* handle data in 32-bit chunks */
while (num_bytes > 0) {
int bytes;
- int is_read = 0;
int tm, i;
tmpdout = 0;
@@ -319,6 +315,9 @@
num_bytes -= bytes;
+ /* clear ready bit */
+ setbits_le32(®s->xfer_status, SPI_XFER_STS_RDY);
+
clrsetbits_le32(®s->command1,
SPI_CMD1_BIT_LEN_MASK << SPI_CMD1_BIT_LEN_SHIFT,
(bytes * 8 - 1) << SPI_CMD1_BIT_LEN_SHIFT);
@@ -329,20 +328,14 @@
* Wait for SPI transmit FIFO to empty, or to time out.
* The RX FIFO status will be read and cleared last
*/
- for (tm = 0, is_read = 0; tm < SPI_TIMEOUT; ++tm) {
+ for (tm = 0; tm < SPI_TIMEOUT; ++tm) {
u32 fifo_status, xfer_status;
- fifo_status = readl(®s->fifo_status);
-
- /* We can exit when we've had both RX and TX activity */
- if (is_read &&
- (fifo_status & SPI_FIFO_STS_TX_FIFO_EMPTY))
- break;
-
xfer_status = readl(®s->xfer_status);
if (!(xfer_status & SPI_XFER_STS_RDY))
continue;
+ fifo_status = readl(®s->fifo_status);
if (fifo_status & SPI_FIFO_STS_ERR) {
debug("%s: got a fifo error: ", __func__);
if (fifo_status & SPI_FIFO_STS_TX_FIFO_OVF)
@@ -367,7 +360,6 @@
if (!(fifo_status & SPI_FIFO_STS_RX_FIFO_EMPTY)) {
tmpdin = readl(®s->rx_fifo);
- is_read = 1;
/* swap bytes read in */
if (din != NULL) {
@@ -377,6 +369,9 @@
}
din += bytes;
}
+
+ /* We can exit when we've had both RX and TX */
+ break;
}
}
diff --git a/drivers/tpm/Makefile b/drivers/tpm/Makefile
index 2f2353f..150570e 100644
--- a/drivers/tpm/Makefile
+++ b/drivers/tpm/Makefile
@@ -8,3 +8,4 @@
obj-$(CONFIG_TPM_TIS_I2C) += tpm.o
obj-$(CONFIG_TPM_TIS_I2C) += tpm_tis_i2c.o
obj-$(CONFIG_TPM_TIS_LPC) += tpm_tis_lpc.o
+obj-$(CONFIG_TPM_TIS_SANDBOX) += tpm_tis_sandbox.o
diff --git a/drivers/tpm/tpm_tis_sandbox.c b/drivers/tpm/tpm_tis_sandbox.c
new file mode 100644
index 0000000..ed4b039
--- /dev/null
+++ b/drivers/tpm/tpm_tis_sandbox.c
@@ -0,0 +1,260 @@
+/*
+ * Copyright (c) 2013 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/state.h>
+#include <asm/unaligned.h>
+#include <linux/crc8.h>
+
+/* TPM NVRAM location indices. */
+#define FIRMWARE_NV_INDEX 0x1007
+#define KERNEL_NV_INDEX 0x1008
+
+#define NV_DATA_PUBLIC_PERMISSIONS_OFFSET 60
+
+/* Kernel TPM space - KERNEL_NV_INDEX, locked with physical presence */
+#define ROLLBACK_SPACE_KERNEL_VERSION 2
+#define ROLLBACK_SPACE_KERNEL_UID 0x4752574C /* 'GRWL' */
+
+struct rollback_space_kernel {
+ /* Struct version, for backwards compatibility */
+ uint8_t struct_version;
+ /* Unique ID to detect space redefinition */
+ uint32_t uid;
+ /* Kernel versions */
+ uint32_t kernel_versions;
+ /* Reserved for future expansion */
+ uint8_t reserved[3];
+ /* Checksum (v2 and later only) */
+ uint8_t crc8;
+} __packed rollback_space_kernel;
+
+/*
+ * These numbers derive from adding the sizes of command fields as shown in
+ * the TPM commands manual.
+ */
+#define TPM_REQUEST_HEADER_LENGTH 10
+#define TPM_RESPONSE_HEADER_LENGTH 10
+
+/* These are the different non-volatile spaces that we emulate */
+enum {
+ NV_GLOBAL_LOCK,
+ NV_SEQ_FIRMWARE,
+ NV_SEQ_KERNEL,
+ NV_SEQ_COUNT,
+};
+
+/* Size of each non-volatile space */
+#define NV_DATA_SIZE 0x20
+
+/*
+ * Information about our TPM emulation. This is preserved in the sandbox
+ * state file if enabled.
+ */
+static struct tpm_state {
+ uint8_t nvdata[NV_SEQ_COUNT][NV_DATA_SIZE];
+} state;
+
+/**
+ * sandbox_tpm_read_state() - read the sandbox EC state from the state file
+ *
+ * If data is available, then blob and node will provide access to it. If
+ * not this function sets up an empty TPM.
+ *
+ * @blob: Pointer to device tree blob, or NULL if no data to read
+ * @node: Node offset to read from
+ */
+static int sandbox_tpm_read_state(const void *blob, int node)
+{
+ const char *prop;
+ int len;
+ int i;
+
+ if (!blob)
+ return 0;
+
+ for (i = 0; i < NV_SEQ_COUNT; i++) {
+ char prop_name[20];
+
+ sprintf(prop_name, "nvdata%d", i);
+ prop = fdt_getprop(blob, node, prop_name, &len);
+ if (prop && len == NV_DATA_SIZE)
+ memcpy(state.nvdata[i], prop, NV_DATA_SIZE);
+ }
+
+ return 0;
+}
+
+/**
+ * cros_ec_write_state() - Write out our state to the state file
+ *
+ * The caller will ensure that there is a node ready for the state. The node
+ * may already contain the old state, in which case it is overridden.
+ *
+ * @blob: Device tree blob holding state
+ * @node: Node to write our state into
+ */
+static int sandbox_tpm_write_state(void *blob, int node)
+{
+ int i;
+
+ /*
+ * We are guaranteed enough space to write basic properties.
+ * We could use fdt_add_subnode() to put each set of data in its
+ * own node - perhaps useful if we add access informaiton to each.
+ */
+ for (i = 0; i < NV_SEQ_COUNT; i++) {
+ char prop_name[20];
+
+ sprintf(prop_name, "nvdata%d", i);
+ fdt_setprop(blob, node, prop_name, state.nvdata[i],
+ NV_DATA_SIZE);
+ }
+
+ return 0;
+}
+
+SANDBOX_STATE_IO(sandbox_tpm, "google,sandbox-tpm", sandbox_tpm_read_state,
+ sandbox_tpm_write_state);
+
+static int index_to_seq(uint32_t index)
+{
+ switch (index) {
+ case FIRMWARE_NV_INDEX:
+ return NV_SEQ_FIRMWARE;
+ case KERNEL_NV_INDEX:
+ return NV_SEQ_KERNEL;
+ case 0:
+ return NV_GLOBAL_LOCK;
+ }
+
+ printf("Invalid nv index %#x\n", index);
+ return -1;
+}
+
+int tis_sendrecv(const u8 *sendbuf, size_t send_size,
+ u8 *recvbuf, size_t *recv_len)
+{
+ struct tpm_state *tpm = &state;
+ uint32_t code, index, length, type;
+ uint8_t *data;
+ int seq;
+
+ code = get_unaligned_be32(sendbuf + sizeof(uint16_t) +
+ sizeof(uint32_t));
+ printf("tpm: %zd bytes, recv_len %zd, cmd = %x\n", send_size,
+ *recv_len, code);
+ print_buffer(0, sendbuf, 1, send_size, 0);
+ switch (code) {
+ case 0x65: /* get flags */
+ type = get_unaligned_be32(sendbuf + 14);
+ switch (type) {
+ case 4:
+ index = get_unaligned_be32(sendbuf + 18);
+ printf("Get flags index %#02x\n", index);
+ *recv_len = 22;
+ memset(recvbuf, '\0', *recv_len);
+ put_unaligned_be32(22, recvbuf +
+ TPM_RESPONSE_HEADER_LENGTH);
+ data = recvbuf + TPM_RESPONSE_HEADER_LENGTH +
+ sizeof(uint32_t);
+ switch (index) {
+ case FIRMWARE_NV_INDEX:
+ break;
+ case KERNEL_NV_INDEX:
+ /* TPM_NV_PER_PPWRITE */
+ put_unaligned_be32(1, data +
+ NV_DATA_PUBLIC_PERMISSIONS_OFFSET);
+ break;
+ }
+ break;
+ case 0x11: /* TPM_CAP_NV_INDEX */
+ index = get_unaligned_be32(sendbuf + 18);
+ printf("Get cap nv index %#02x\n", index);
+ put_unaligned_be32(22, recvbuf +
+ TPM_RESPONSE_HEADER_LENGTH);
+ break;
+ default:
+ printf(" ** Unknown 0x65 command type %#02x\n",
+ type);
+ return -1;
+ }
+ break;
+ case 0xcd: /* nvwrite */
+ index = get_unaligned_be32(sendbuf + 10);
+ length = get_unaligned_be32(sendbuf + 18);
+ seq = index_to_seq(index);
+ if (seq < 0)
+ return -1;
+ printf("tpm: nvwrite index=%#02x, len=%#02x\n", index, length);
+ memcpy(&tpm->nvdata[seq], sendbuf + 22, length);
+ *recv_len = 12;
+ memset(recvbuf, '\0', *recv_len);
+ break;
+ case 0xcf: /* nvread */
+ index = get_unaligned_be32(sendbuf + 10);
+ length = get_unaligned_be32(sendbuf + 18);
+ seq = index_to_seq(index);
+ if (seq < 0)
+ return -1;
+ printf("tpm: nvread index=%#02x, len=%#02x\n", index, length);
+ *recv_len = TPM_RESPONSE_HEADER_LENGTH + sizeof(uint32_t) +
+ length;
+ memset(recvbuf, '\0', *recv_len);
+ put_unaligned_be32(length, recvbuf +
+ TPM_RESPONSE_HEADER_LENGTH);
+ if (seq == NV_SEQ_KERNEL) {
+ struct rollback_space_kernel rsk;
+
+ data = recvbuf + TPM_RESPONSE_HEADER_LENGTH +
+ sizeof(uint32_t);
+ rsk.struct_version = 2;
+ rsk.uid = ROLLBACK_SPACE_KERNEL_UID;
+ rsk.kernel_versions = 0;
+ rsk.crc8 = crc8((unsigned char *)&rsk,
+ offsetof(struct rollback_space_kernel,
+ crc8));
+ memcpy(data, &rsk, sizeof(rsk));
+ } else {
+ memcpy(recvbuf + TPM_RESPONSE_HEADER_LENGTH +
+ sizeof(uint32_t), &tpm->nvdata[seq], length);
+ }
+ break;
+ case 0x14: /* tpm extend */
+ case 0x15: /* pcr read */
+ case 0x5d: /* force clear */
+ case 0x6f: /* physical enable */
+ case 0x72: /* physical set deactivated */
+ case 0x99: /* startup */
+ case 0x4000000a: /* assert physical presence */
+ *recv_len = 12;
+ memset(recvbuf, '\0', *recv_len);
+ break;
+ default:
+ printf("Unknown tpm command %02x\n", code);
+ return -1;
+ }
+
+ return 0;
+}
+
+int tis_open(void)
+{
+ printf("%s\n", __func__);
+ return 0;
+}
+
+int tis_close(void)
+{
+ printf("%s\n", __func__);
+ return 0;
+}
+
+int tis_init(void)
+{
+ printf("%s\n", __func__);
+ return 0;
+}
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index f52d3f4..f13b172 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -5,12 +5,8 @@
# SPDX-License-Identifier: GPL-2.0+
#
-# if defined(CONFIG_USB_GADGET) || defined(CONFIG_USB_ETHER)
-# Everytime you forget how crufty makefiles can get things like
-# this remind you...
-ifneq (,$(CONFIG_USB_GADGET)$(CONFIG_USB_ETHER))
-obj-y += epautoconf.o config.o usbstring.o
-endif
+obj-$(CONFIG_USB_GADGET) += epautoconf.o config.o usbstring.o
+obj-$(CONFIG_USB_ETHER) += epautoconf.o config.o usbstring.o
# new USB gadget layer dependencies
ifdef CONFIG_USB_GADGET
diff --git a/drivers/usb/gadget/f_dfu.c b/drivers/usb/gadget/f_dfu.c
index 37d04a1..a045864 100644
--- a/drivers/usb/gadget/f_dfu.c
+++ b/drivers/usb/gadget/f_dfu.c
@@ -40,6 +40,7 @@
/* Send/received block number is handy for data integrity check */
int blk_seq_num;
+ unsigned int poll_timeout;
};
typedef int (*dfu_state_fn) (struct f_dfu *,
@@ -128,6 +129,33 @@
NULL,
};
+static void dfu_set_poll_timeout(struct dfu_status *dstat, unsigned int ms)
+{
+ /*
+ * The bwPollTimeout DFU_GETSTATUS request payload provides information
+ * about minimum time, in milliseconds, that the host should wait before
+ * sending a subsequent DFU_GETSTATUS request
+ *
+ * This permits the device to vary the delay depending on its need to
+ * erase or program the memory
+ *
+ */
+
+ unsigned char *p = (unsigned char *)&ms;
+
+ if (!ms || (ms & ~DFU_POLL_TIMEOUT_MASK)) {
+ dstat->bwPollTimeout[0] = 0;
+ dstat->bwPollTimeout[1] = 0;
+ dstat->bwPollTimeout[2] = 0;
+
+ return;
+ }
+
+ dstat->bwPollTimeout[0] = *p++;
+ dstat->bwPollTimeout[1] = *p++;
+ dstat->bwPollTimeout[2] = *p;
+}
+
/*-------------------------------------------------------------------------*/
static void dnload_request_complete(struct usb_ep *ep, struct usb_request *req)
@@ -157,11 +185,15 @@
break;
}
+ dfu_set_poll_timeout(dstat, 0);
+
+ if (f_dfu->poll_timeout)
+ if (!(f_dfu->blk_seq_num %
+ (dfu_get_buf_size() / DFU_USB_BUFSIZ)))
+ dfu_set_poll_timeout(dstat, f_dfu->poll_timeout);
+
/* send status response */
dstat->bStatus = f_dfu->dfu_status;
- dstat->bwPollTimeout[0] = 0;
- dstat->bwPollTimeout[1] = 0;
- dstat->bwPollTimeout[2] = 0;
dstat->bState = f_dfu->dfu_state;
dstat->iString = 0;
}
@@ -723,8 +755,9 @@
f_dfu->usb_function.unbind = dfu_unbind;
f_dfu->usb_function.set_alt = dfu_set_alt;
f_dfu->usb_function.disable = dfu_disable;
- f_dfu->usb_function.strings = dfu_generic_strings,
- f_dfu->usb_function.setup = dfu_handle,
+ f_dfu->usb_function.strings = dfu_generic_strings;
+ f_dfu->usb_function.setup = dfu_handle;
+ f_dfu->poll_timeout = DFU_DEFAULT_POLL_TIMEOUT;
status = usb_add_function(c, &f_dfu->usb_function);
if (status)
diff --git a/drivers/usb/gadget/f_dfu.h b/drivers/usb/gadget/f_dfu.h
index cc2c455..0c29954 100644
--- a/drivers/usb/gadget/f_dfu.h
+++ b/drivers/usb/gadget/f_dfu.h
@@ -82,4 +82,6 @@
__le16 wTransferSize;
__le16 bcdDFUVersion;
} __packed;
+
+#define DFU_POLL_TIMEOUT_MASK (0xFFFFFFUL)
#endif /* __F_DFU_H_ */
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 8bd1eb8..17187ca 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -201,6 +201,9 @@
int i, ret = 0;
uint32_t cmd, reg;
+ if (!ctrl || !ctrl->hcor)
+ return -EINVAL;
+
cmd = ehci_readl(&ctrl->hcor->or_usbcmd);
cmd &= ~(CMD_PSE | CMD_ASE);
ehci_writel(&ctrl->hcor->or_usbcmd, cmd);
@@ -945,7 +948,7 @@
#endif
/* Set the high address word (aka segment) for 64-bit controller */
if (ehci_readl(&ehcic[index].hccr->cr_hccparams) & 1)
- ehci_writel(ehcic[index].hcor->or_ctrldssegment, 0);
+ ehci_writel(&ehcic[index].hcor->or_ctrldssegment, 0);
qh_list = &ehcic[index].qh_list;
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 7a1ffe5..991b199 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -54,9 +54,31 @@
bdf += PCI_BDF(0, 0, 1)) {
pci_read_config_dword(bdf, PCI_CLASS_REVISION,
&class);
- if ((class >> 8 == PCI_CLASS_SERIAL_USB_EHCI)
- && !index--)
- return bdf;
+ class >>= 8;
+ /*
+ * Here be dragons! In case we have multiple
+ * PCI EHCI controllers, this function will
+ * be called multiple times as well. This
+ * function will scan the PCI busses, always
+ * starting from bus 0, device 0, function 0,
+ * until it finds an USB controller. The USB
+ * stack gives us an 'index' of a controller
+ * that is currently being registered, which
+ * is a number, starting from 0 and growing
+ * in ascending order as controllers are added.
+ * To avoid probing the same controller in tne
+ * subsequent runs of this function, we will
+ * skip 'index - 1' detected controllers and
+ * report the index'th controller.
+ */
+ if (class != PCI_CLASS_SERIAL_USB_EHCI)
+ continue;
+ if (index) {
+ index--;
+ continue;
+ }
+ /* Return index'th controller. */
+ return bdf;
}
}
}
diff --git a/drivers/video/ipu_disp.c b/drivers/video/ipu_disp.c
index 22ac142..cefd2dc 100644
--- a/drivers/video/ipu_disp.c
+++ b/drivers/video/ipu_disp.c
@@ -889,7 +889,7 @@
debug("panel size = %d x %d\n", width, height);
if ((v_sync_width == 0) || (h_sync_width == 0))
- return EINVAL;
+ return -EINVAL;
adapt_panel_to_ipu_restricitions(&pixel_clk, width, height,
h_start_width, h_end_width,
diff --git a/dts/Makefile b/dts/Makefile
index 140c8bc..6c7198f 100644
--- a/dts/Makefile
+++ b/dts/Makefile
@@ -10,7 +10,7 @@
ifeq ($(DEVICE_TREE),)
$(if $(CONFIG_DEFAULT_DEVICE_TREE),,\
$(error Please define CONFIG_DEFAULT_DEVICE_TREE in your board header file))
-DEVICE_TREE = $(subst ",,$(CONFIG_DEFAULT_DEVICE_TREE))
+DEVICE_TREE = $(CONFIG_DEFAULT_DEVICE_TREE:"%"=%)
endif
DTS_INCDIRS = $(SRCTREE)/board/$(VENDOR)/$(BOARD)/dts
diff --git a/examples/standalone/.gitignore b/examples/standalone/.gitignore
index 4d9ce66..6d3a616 100644
--- a/examples/standalone/.gitignore
+++ b/examples/standalone/.gitignore
@@ -1,6 +1,4 @@
-/82559_eeprom
/atmel_df_pow2
-/eepro100_eeprom
/hello_world
/interrupt
/mem_to_mem_idma2intr
diff --git a/examples/standalone/82559_eeprom.c b/examples/standalone/82559_eeprom.c
deleted file mode 100644
index c253055..0000000
--- a/examples/standalone/82559_eeprom.c
+++ /dev/null
@@ -1,356 +0,0 @@
-/*
- * Copyright 1998-2001 by Donald Becker.
- * This software may be used and distributed according to the terms of
- * the GNU General Public License (GPL), incorporated herein by reference.
- * Contact the author for use under other terms.
- *
- * This program must be compiled with "-O"!
- * See the bottom of this file for the suggested compile-command.
- *
- * The author may be reached as becker@scyld.com, or C/O
- * Scyld Computing Corporation
- * 410 Severn Ave., Suite 210
- * Annapolis MD 21403
- *
- * Common-sense licensing statement: Using any portion of this program in
- * your own program means that you must give credit to the original author
- * and release the resulting code under the GPL.
- */
-
-#define _PPC_STRING_H_ /* avoid unnecessary str/mem functions */
-
-#include <common.h>
-#include <exports.h>
-#include <asm/io.h>
-
-
-/* Default EEPROM for i82559 */
-static unsigned short default_eeprom[64] = {
- 0x0100, 0x0302, 0x0504, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
- 0xffff, 0xffff, 0x40c0, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff,
- 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
- 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
- 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
- 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
- 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
- 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff
-};
-
-static unsigned short eeprom[256];
-
-static int eeprom_size = 64;
-static int eeprom_addr_size = 6;
-
-static int debug = 0;
-
-static inline unsigned short swap16(unsigned short x)
-{
- return (((x & 0xff) << 8) | ((x & 0xff00) >> 8));
-}
-
-
-void * memcpy(void * dest,const void *src,size_t count)
-{
- char *tmp = (char *) dest, *s = (char *) src;
-
- while (count--)
- *tmp++ = *s++;
-
- return dest;
-}
-
-
-/* The EEPROM commands include the alway-set leading bit. */
-#define EE_WRITE_CMD (5)
-#define EE_READ_CMD (6)
-#define EE_ERASE_CMD (7)
-
-/* Serial EEPROM section. */
-#define EE_SHIFT_CLK 0x01 /* EEPROM shift clock. */
-#define EE_CS 0x02 /* EEPROM chip select. */
-#define EE_DATA_WRITE 0x04 /* EEPROM chip data in. */
-#define EE_DATA_READ 0x08 /* EEPROM chip data out. */
-#define EE_ENB (0x4800 | EE_CS)
-#define EE_WRITE_0 0x4802
-#define EE_WRITE_1 0x4806
-#define EE_OFFSET 14
-
-/* Delay between EEPROM clock transitions. */
-#define eeprom_delay(ee_addr) inw(ee_addr)
-
-/* Wait for the EEPROM to finish the previous operation. */
-static int eeprom_busy_poll(long ee_ioaddr)
-{
- int i;
- outw(EE_ENB, ee_ioaddr);
- for (i = 0; i < 10000; i++) /* Typical 2000 ticks */
- if (inw(ee_ioaddr) & EE_DATA_READ)
- break;
- return i;
-}
-
-/* This executes a generic EEPROM command, typically a write or write enable.
- It returns the data output from the EEPROM, and thus may also be used for
- reads. */
-static int do_eeprom_cmd(long ioaddr, int cmd, int cmd_len)
-{
- unsigned retval = 0;
- long ee_addr = ioaddr + EE_OFFSET;
-
- if (debug > 1)
- printf(" EEPROM op 0x%x: ", cmd);
-
- outw(EE_ENB | EE_SHIFT_CLK, ee_addr);
-
- /* Shift the command bits out. */
- do {
- short dataval = (cmd & (1 << cmd_len)) ? EE_WRITE_1 : EE_WRITE_0;
- outw(dataval, ee_addr);
- eeprom_delay(ee_addr);
- if (debug > 2)
- printf("%X", inw(ee_addr) & 15);
- outw(dataval | EE_SHIFT_CLK, ee_addr);
- eeprom_delay(ee_addr);
- retval = (retval << 1) | ((inw(ee_addr) & EE_DATA_READ) ? 1 : 0);
- } while (--cmd_len >= 0);
-#if 0
- outw(EE_ENB, ee_addr);
-#endif
- /* Terminate the EEPROM access. */
- outw(EE_ENB & ~EE_CS, ee_addr);
- if (debug > 1)
- printf(" EEPROM result is 0x%5.5x.\n", retval);
- return retval;
-}
-
-static int read_eeprom(long ioaddr, int location, int addr_len)
-{
- return do_eeprom_cmd(ioaddr, ((EE_READ_CMD << addr_len) | location)
- << 16 , 3 + addr_len + 16) & 0xffff;
-}
-
-static void write_eeprom(long ioaddr, int index, int value, int addr_len)
-{
- long ee_ioaddr = ioaddr + EE_OFFSET;
- int i;
-
- /* Poll for previous op finished. */
- eeprom_busy_poll(ee_ioaddr); /* Typical 0 ticks */
- /* Enable programming modes. */
- do_eeprom_cmd(ioaddr, (0x4f << (addr_len-4)), 3 + addr_len);
- /* Do the actual write. */
- do_eeprom_cmd(ioaddr,
- (((EE_WRITE_CMD<<addr_len) | index)<<16) | (value & 0xffff),
- 3 + addr_len + 16);
- /* Poll for write finished. */
- i = eeprom_busy_poll(ee_ioaddr); /* Typical 2000 ticks */
- if (debug)
- printf(" Write finished after %d ticks.\n", i);
- /* Disable programming. This command is not instantaneous, so we check
- for busy before the next op. */
- do_eeprom_cmd(ioaddr, (0x40 << (addr_len-4)), 3 + addr_len);
- eeprom_busy_poll(ee_ioaddr);
-}
-
-static int reset_eeprom(unsigned long ioaddr, unsigned char *hwaddr)
-{
- unsigned short checksum = 0;
- int size_test;
- int i;
-
- printf("Resetting i82559 EEPROM @ 0x%08lx ... ", ioaddr);
-
- size_test = do_eeprom_cmd(ioaddr, (EE_READ_CMD << 8) << 16, 27);
- eeprom_addr_size = (size_test & 0xffe0000) == 0xffe0000 ? 8 : 6;
- eeprom_size = 1 << eeprom_addr_size;
-
- memcpy(eeprom, default_eeprom, sizeof default_eeprom);
-
- for (i = 0; i < 3; i++)
- eeprom[i] = (hwaddr[i*2+1]<<8) + hwaddr[i*2];
-
- /* Recalculate the checksum. */
- for (i = 0; i < eeprom_size - 1; i++)
- checksum += eeprom[i];
- eeprom[i] = 0xBABA - checksum;
-
- for (i = 0; i < eeprom_size; i++)
- write_eeprom(ioaddr, i, eeprom[i], eeprom_addr_size);
-
- for (i = 0; i < eeprom_size; i++)
- if (read_eeprom(ioaddr, i, eeprom_addr_size) != eeprom[i]) {
- printf("failed\n");
- return 1;
- }
-
- printf("done\n");
- return 0;
-}
-
-static unsigned int hatoi(char *p, char **errp)
-{
- unsigned int res = 0;
-
- while (1) {
- switch (*p) {
- case 'a':
- case 'b':
- case 'c':
- case 'd':
- case 'e':
- case 'f':
- res |= (*p - 'a' + 10);
- break;
- case 'A':
- case 'B':
- case 'C':
- case 'D':
- case 'E':
- case 'F':
- res |= (*p - 'A' + 10);
- break;
- case '0':
- case '1':
- case '2':
- case '3':
- case '4':
- case '5':
- case '6':
- case '7':
- case '8':
- case '9':
- res |= (*p - '0');
- break;
- default:
- if (errp) {
- *errp = p;
- }
- return res;
- }
- p++;
- if (*p == 0) {
- break;
- }
- res <<= 4;
- }
-
- if (errp) {
- *errp = NULL;
- }
-
- return res;
-}
-
-static unsigned char *gethwaddr(char *in, unsigned char *out)
-{
- char tmp[3];
- int i;
- char *err;
-
- for (i=0;i<6;i++) {
- if (in[i*3+2] == 0 && i == 5) {
- out[i] = hatoi(&in[i*3], &err);
- if (err) {
- return NULL;
- }
- } else if (in[i*3+2] == ':' && i < 5) {
- tmp[0] = in[i*3];
- tmp[1] = in[i*3+1];
- tmp[2] = 0;
- out[i] = hatoi(tmp, &err);
- if (err) {
- return NULL;
- }
- } else {
- return NULL;
- }
- }
-
- return out;
-}
-
-static u32
-read_config_dword(int bus, int dev, int func, int reg)
-{
- u32 res;
-
- outl(0x80000000|(bus&0xff)<<16|(dev&0x1f)<<11|(func&7)<<8|(reg&0xfc),
- 0xcf8);
- res = inl(0xcfc);
- outl(0, 0xcf8);
- return res;
-}
-
-static u16
-read_config_word(int bus, int dev, int func, int reg)
-{
- u32 res;
-
- outl(0x80000000|(bus&0xff)<<16|(dev&0x1f)<<11|(func&7)<<8|(reg&0xfc),
- 0xcf8);
- res = inw(0xcfc + (reg & 2));
- outl(0, 0xcf8);
- return res;
-}
-
-static void
-write_config_word(int bus, int dev, int func, int reg, u16 data)
-{
-
- outl(0x80000000|(bus&0xff)<<16|(dev&0x1f)<<11|(func&7)<<8|(reg&0xfc),
- 0xcf8);
- outw(data, 0xcfc + (reg & 2));
- outl(0, 0xcf8);
-}
-
-
-int main (int argc, char * const argv[])
-{
- unsigned char *eth_addr;
- uchar buf[6];
- int instance;
-
- app_startup(argv);
- if (argc != 2) {
- printf ("call with base Ethernet address\n");
- return 1;
- }
-
-
- eth_addr = gethwaddr(argv[1], buf);
- if (NULL == eth_addr) {
- printf ("Can not parse ethernet address\n");
- return 1;
- }
- if (eth_addr[5] & 0x01) {
- printf("Base Ethernet address must be even\n");
- }
-
-
- for (instance = 0; instance < 2; instance ++) {
- unsigned int io_addr;
- unsigned char mac[6];
- int bar1 = read_config_dword(0, 6+instance, 0, 0x14);
- if (! (bar1 & 1)) {
- printf("ETH%d is disabled %x\n", instance, bar1);
- } else {
- printf("ETH%d IO=0x%04x\n", instance, bar1 & ~3);
- }
- io_addr = (bar1 & (~3L));
-
-
- write_config_word(0, 6+instance, 0, 4,
- read_config_word(0, 6+instance, 0, 4) | 1);
- printf("ETH%d CMD %04x\n", instance,
- read_config_word(0, 6+instance, 0, 4));
-
- memcpy(mac, eth_addr, 6);
- mac[5] += instance;
-
- printf("got io=%04x, ha=%02x:%02x:%02x:%02x:%02x:%02x\n",
- io_addr, mac[0], mac[1], mac[2],
- mac[3], mac[4], mac[5]);
- reset_eeprom(io_addr, mac);
- }
- return 0;
-}
diff --git a/examples/standalone/Makefile b/examples/standalone/Makefile
index f4f102b..0841c75 100644
--- a/examples/standalone/Makefile
+++ b/examples/standalone/Makefile
@@ -7,25 +7,22 @@
include $(TOPDIR)/config.mk
-ELF-$(ARCH) :=
-ELF-$(CPU) :=
ELF-y := hello_world
ELF-$(CONFIG_SMC91111) += smc91111_eeprom
ELF-$(CONFIG_SMC911X) += smc911x_eeprom
ELF-$(CONFIG_SPI_FLASH_ATMEL) += atmel_df_pow2
-ELF-i386 += 82559_eeprom
-ELF-mpc5xxx += interrupt
-ELF-mpc8xx += test_burst timer
-ELF-mpc8260 += mem_to_mem_idma2intr
-ELF-ppc += sched
+ELF-$(CONFIG_MPC5xxx) += interrupt
+ELF-$(CONFIG_8xx) += test_burst timer
+ELF-$(CONFIG_8260) += mem_to_mem_idma2intr
+ELF-$(CONFIG_PPC) += sched
#
# Some versions of make do not handle trailing white spaces properly;
# leading to build failures. The problem was found with GNU Make 3.80.
# Using 'strip' as a workaround for the problem.
#
-ELF := $(strip $(ELF-y) $(ELF-$(ARCH)) $(ELF-$(CPU)))
+ELF := $(strip $(ELF-y))
SREC := $(addsuffix .srec,$(ELF))
BIN := $(addsuffix .bin,$(ELF))
@@ -34,11 +31,9 @@
LIB = $(obj)libstubs.o
-LIBAOBJS-$(ARCH) :=
-LIBAOBJS-$(CPU) :=
-LIBAOBJS-ppc += $(ARCH)_longjmp.o $(ARCH)_setjmp.o
-LIBAOBJS-mpc8xx += test_burst_lib.o
-LIBAOBJS := $(LIBAOBJS-$(ARCH)) $(LIBAOBJS-$(CPU))
+LIBAOBJS-$(CONFIG_PPC) += ppc_longjmp.o ppc_setjmp.o
+LIBAOBJS-$(CONFIG_8xx) += test_burst_lib.o
+LIBAOBJS := $(LIBAOBJS-y)
LIBCOBJS = stubs.o
diff --git a/examples/standalone/stubs.c b/examples/standalone/stubs.c
index 5d2ab56..32a19ce 100644
--- a/examples/standalone/stubs.c
+++ b/examples/standalone/stubs.c
@@ -39,6 +39,20 @@
" bctr\n" \
: : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "r11");
#elif defined(CONFIG_ARM)
+#ifdef CONFIG_ARM64
+/*
+ * x18 holds the pointer to the global_data, x9 is a call-clobbered
+ * register
+ */
+#define EXPORT_FUNC(x) \
+ asm volatile ( \
+" .globl " #x "\n" \
+#x ":\n" \
+" ldr x9, [x18, %0]\n" \
+" ldr x9, [x9, %1]\n" \
+" br x9\n" \
+ : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "x9");
+#else
/*
* r9 holds the pointer to the global_data, ip is a call-clobbered
* register
@@ -50,6 +64,7 @@
" ldr ip, [r9, %0]\n" \
" ldr pc, [ip, %1]\n" \
: : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "ip");
+#endif
#elif defined(CONFIG_MIPS)
/*
* k0 ($26) holds the pointer to the global_data; t9 ($25) is a call-
diff --git a/fs/jffs2/jffs2_1pass.c b/fs/jffs2/jffs2_1pass.c
index c856983..3fb5db3 100644
--- a/fs/jffs2/jffs2_1pass.c
+++ b/fs/jffs2/jffs2_1pass.c
@@ -114,6 +114,7 @@
#include <common.h>
#include <config.h>
#include <malloc.h>
+#include <div64.h>
#include <linux/stat.h>
#include <linux/time.h>
#include <watchdog.h>
@@ -1438,7 +1439,7 @@
{
struct b_lists *pL;
struct jffs2_unknown_node *node;
- u32 nr_sectors = part->size/part->sector_size;
+ u32 nr_sectors;
u32 i;
u32 counter4 = 0;
u32 counterF = 0;
@@ -1447,6 +1448,7 @@
u32 buf_size = DEFAULT_EMPTY_SCAN_SIZE;
char *buf;
+ nr_sectors = lldiv(part->size, part->sector_size);
/* turn off the lcd. Refreshing the lcd adds 50% overhead to the */
/* jffs2 list building enterprise nope. in newer versions the overhead is */
/* only about 5 %. not enough to inconvenience people for. */
diff --git a/fs/yaffs2/yaffs_uboot_glue.c b/fs/yaffs2/yaffs_uboot_glue.c
index e113e40..50000a1 100644
--- a/fs/yaffs2/yaffs_uboot_glue.c
+++ b/fs/yaffs2/yaffs_uboot_glue.c
@@ -20,6 +20,7 @@
*/
#include <common.h>
+#include <div64.h>
#include <config.h>
#include "nand.h"
@@ -184,7 +185,7 @@
}
if (end_block == 0)
- end_block = mtd->size / mtd->erasesize - 1;
+ end_block = lldiv(mtd->size, mtd->erasesize - 1);
if (end_block < start_block) {
printf("Bad start/end\n");
diff --git a/fs/yaffs2/yaffsfs.c b/fs/yaffs2/yaffsfs.c
index ac4a010..334598e 100644
--- a/fs/yaffs2/yaffsfs.c
+++ b/fs/yaffs2/yaffsfs.c
@@ -11,6 +11,7 @@
* published by the Free Software Foundation.
*/
+#include <div64.h>
#include "yaffsfs.h"
#include "yaffs_guts.h"
#include "yaffscfg.h"
@@ -1603,8 +1604,8 @@
buf->st_rdev = obj->yst_rdev;
buf->st_size = yaffs_get_obj_length(obj);
buf->st_blksize = obj->my_dev->data_bytes_per_chunk;
- buf->st_blocks = (buf->st_size + buf->st_blksize - 1) /
- buf->st_blksize;
+ buf->st_blocks = lldiv(buf->st_size + buf->st_blksize - 1,
+ buf->st_blksize);
#if CONFIG_YAFFS_WINCE
buf->yst_wince_atime[0] = obj->win_atime[0];
buf->yst_wince_atime[1] = obj->win_atime[1];
diff --git a/include/common.h b/include/common.h
index 8ca67f6..d49c514 100644
--- a/include/common.h
+++ b/include/common.h
@@ -698,6 +698,10 @@
#if defined(CONFIG_MPC85xx)
typedef MPC85xx_SYS_INFO sys_info_t;
void get_sys_info ( sys_info_t * );
+# if defined(CONFIG_OF_LIBFDT)
+ void ft_fixup_cpu(void *, u64);
+ void ft_fixup_num_cores(void *);
+# endif
#endif
#if defined(CONFIG_MPC86xx)
typedef MPC86xx_SYS_INFO sys_info_t;
diff --git a/include/config_defaults.h b/include/config_defaults.h
index 567b46c..ad08c1d 100644
--- a/include/config_defaults.h
+++ b/include/config_defaults.h
@@ -14,6 +14,7 @@
#define CONFIG_BOOTM_NETBSD 1
#define CONFIG_BOOTM_PLAN9 1
#define CONFIG_BOOTM_RTEMS 1
+#define CONFIG_BOOTM_VXWORKS 1
#define CONFIG_GZIP 1
#define CONFIG_ZLIB 1
diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h
index 3633b09..d8339b2 100644
--- a/include/config_fallbacks.h
+++ b/include/config_fallbacks.h
@@ -50,7 +50,8 @@
defined(CONFIG_CMD_PART) || \
defined(CONFIG_CMD_GPT) || \
defined(CONFIG_MMC) || \
- defined(CONFIG_SYSTEMACE)
+ defined(CONFIG_SYSTEMACE) || \
+ defined(CONFIG_SANDBOX)
#define HAVE_BLOCK_DEVICE
#endif
diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h
index b2a5c19..c182158 100644
--- a/include/configs/B4860QDS.h
+++ b/include/configs/B4860QDS.h
@@ -289,6 +289,8 @@
/* NAND Flash on IFC */
#define CONFIG_NAND_FSL_IFC
+#define CONFIG_SYS_NAND_MAX_ECCPOS 256
+#define CONFIG_SYS_NAND_MAX_OOBFREE 2
#define CONFIG_SYS_NAND_BASE 0xff800000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE)
@@ -737,7 +739,6 @@
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h
index 499d8c2..584aba8 100644
--- a/include/configs/BSC9131RDB.h
+++ b/include/configs/BSC9131RDB.h
@@ -29,7 +29,7 @@
#define CONFIG_SPL_INIT_MINIMAL
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_MINIMAL
+#define CONFIG_SPL_NAND_BOOT
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
@@ -382,7 +382,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
#define CONFIG_USB_EHCI
diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h
index a6601fe..6170cbc 100644
--- a/include/configs/BSC9132QDS.h
+++ b/include/configs/BSC9132QDS.h
@@ -38,7 +38,7 @@
#define CONFIG_SPL_INIT_MINIMAL
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_MINIMAL
+#define CONFIG_SPL_NAND_BOOT
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
@@ -625,7 +625,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h
index 4a5fc86..0bb22be 100644
--- a/include/configs/CMS700.h
+++ b/include/configs/CMS700.h
@@ -149,6 +149,9 @@
#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
#define CONFIG_SYS_NAND_QUIET 1
+#define CONFIG_SYS_NAND_MAX_OOBFREE 2
+#define CONFIG_SYS_NAND_MAX_ECCPOS 48
+
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
diff --git a/include/configs/DU440.h b/include/configs/DU440.h
index 2d7fc59..71be122 100644
--- a/include/configs/DU440.h
+++ b/include/configs/DU440.h
@@ -406,7 +406,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
#define CONFIG_SOURCE 1
diff --git a/include/configs/EXBITGEN.h b/include/configs/EXBITGEN.h
index f366308..208b599 100644
--- a/include/configs/EXBITGEN.h
+++ b/include/configs/EXBITGEN.h
@@ -186,6 +186,5 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
#endif /* __CONFIG_H */
diff --git a/include/configs/JSE.h b/include/configs/JSE.h
index 4284d6a..5738ea9 100644
--- a/include/configs/JSE.h
+++ b/include/configs/JSE.h
@@ -274,6 +274,5 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
#endif /* __CONFIG_H */
diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h
index 71e90d7..39eb2ef 100644
--- a/include/configs/KAREF.h
+++ b/include/configs/KAREF.h
@@ -273,7 +273,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port baud */
-#define CONFIG_KGDB_SER_INDEX 2 /* kgdb serial port */
#endif
/*-----------------------------------------------------------------------
diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h
index 32ec0bf..6715435 100644
--- a/include/configs/METROBOX.h
+++ b/include/configs/METROBOX.h
@@ -338,7 +338,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port baud */
-#define CONFIG_KGDB_SER_INDEX 2 /* kgdb serial port */
#endif
/*-----------------------------------------------------------------------
diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index f248a56..6042a1e 100644
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -396,7 +396,6 @@
************************************************************/
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/************************************************************
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index 0f9f436..aedb529 100644
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -634,7 +634,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index a1e5f3b..c4c771b 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -481,7 +481,6 @@
#if (CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index 71fc497..f5b6202 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -574,7 +574,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 0374841..7640d06 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -737,7 +737,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index e2ae596..ffb9a15 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -730,7 +730,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index ed780f1..d4c82cd 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -683,7 +683,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index d31be19..01e7ac7 100644
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -544,7 +544,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index 98ffb9c..f52e77a 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -662,7 +662,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index ca28c0e..938f7ab 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -678,7 +678,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 9ab1bc1..9b7cc64 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -740,7 +740,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 046b14b..2d42b25 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -397,7 +397,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index eca3b53..b9ad034 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -410,7 +410,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index 8132ec0..90fc2da 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -441,7 +441,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 6acd54d..5fff1e2 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -535,7 +535,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 5ffdd01..23c6b07 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -408,7 +408,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index bb9ae2d..44b7679 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -438,7 +438,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 7406ac3..4f438a8 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -430,7 +430,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index df5572b..d877e8b 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -566,7 +566,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 63480ec..44d83a2 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -682,7 +682,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
index 41ebe31..f930fcd 100644
--- a/include/configs/MPC8610HPCD.h
+++ b/include/configs/MPC8610HPCD.h
@@ -517,7 +517,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 0e666ba..65d61c2 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -670,7 +670,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
- #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/MigoR.h b/include/configs/MigoR.h
index 9fd4551..88df94f 100644
--- a/include/configs/MigoR.h
+++ b/include/configs/MigoR.h
@@ -10,8 +10,6 @@
#define __MIGO_R_H
#undef DEBUG
-#define CONFIG_SH 1
-#define CONFIG_SH4 1
#define CONFIG_CPU_SH7722 1
#define CONFIG_MIGO_R 1
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index 1ed5e1d..ea5cb65 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -37,7 +37,7 @@
#define CONFIG_SPL_INIT_MINIMAL
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_MINIMAL
+#define CONFIG_SPL_NAND_BOOT
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
@@ -739,7 +739,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index 262c3e5..934a6cb 100644
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -75,6 +75,8 @@
#endif
#define CONFIG_NAND_FSL_ELBC
+#define CONFIG_SYS_NAND_MAX_ECCPOS 56
+#define CONFIG_SYS_NAND_MAX_OOBFREE 5
#ifdef CONFIG_NAND
#define CONFIG_SPL
@@ -725,7 +727,6 @@
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/P1023RDS.h b/include/configs/P1023RDS.h
index 2aa1f59..11c74ff 100644
--- a/include/configs/P1023RDS.h
+++ b/include/configs/P1023RDS.h
@@ -469,7 +469,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index b592c19..85cb076 100644
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -606,7 +606,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/P2020COME.h b/include/configs/P2020COME.h
index 15d2a43..ce3c762 100644
--- a/include/configs/P2020COME.h
+++ b/include/configs/P2020COME.h
@@ -432,7 +432,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h
index 9d3d9b3..ada6c7b 100644
--- a/include/configs/P2020DS.h
+++ b/include/configs/P2020DS.h
@@ -670,7 +670,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index b238574..ee71252 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -677,7 +677,6 @@
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index 1180724..29888b4 100644
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -353,7 +353,6 @@
************************************************************/
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/************************************************************
diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h
index 5ab9315..efe6960 100644
--- a/include/configs/PMC440.h
+++ b/include/configs/PMC440.h
@@ -492,7 +492,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/* pass open firmware flat tree */
diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h
index 43a5778..7d0bc04 100644
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@@ -233,6 +233,7 @@
#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
+#define QIXIS_RST_FORCE_MEM 0x01
#define CONFIG_SYS_CSPR3_EXT (0xf)
#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
@@ -248,7 +249,7 @@
#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \
FTIM1_GPCM_TRAD(0x3f))
#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \
- FTIM2_GPCM_TCH(0x0) | \
+ FTIM2_GPCM_TCH(0x8) | \
FTIM2_GPCM_TWP(0x1f))
#define CONFIG_SYS_CS3_FTIM3 0x0
@@ -682,7 +683,6 @@
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/T1040RDB.h b/include/configs/T1040RDB.h
index 7931231..d721139 100644
--- a/include/configs/T1040RDB.h
+++ b/include/configs/T1040RDB.h
@@ -609,7 +609,6 @@
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/T1042RDB_PI.h b/include/configs/T1042RDB_PI.h
index eff08e3..2c02d9d 100644
--- a/include/configs/T1042RDB_PI.h
+++ b/include/configs/T1042RDB_PI.h
@@ -613,7 +613,6 @@
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index fc25425..15cf2bd 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -495,7 +495,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h
index 57b620d..d40185e 100644
--- a/include/configs/VCMA9.h
+++ b/include/configs/VCMA9.h
@@ -138,8 +138,6 @@
#if defined(CONFIG_CMD_KGDB)
/* speed to run kgdb serial port */
#define CONFIG_KGDB_BAUDRATE 115200
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/* Miscellaneous configurable options */
diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h
index 8fda1b1..00a24ab 100644
--- a/include/configs/W7OLMC.h
+++ b/include/configs/W7OLMC.h
@@ -301,7 +301,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h
index 6836fc7..8ed2fa2 100644
--- a/include/configs/W7OLMG.h
+++ b/include/configs/W7OLMG.h
@@ -304,7 +304,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/ac14xx.h b/include/configs/ac14xx.h
index 1205557..d6cef88 100644
--- a/include/configs/ac14xx.h
+++ b/include/configs/ac14xx.h
@@ -471,7 +471,6 @@
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/actux1.h b/include/configs/actux1.h
index 3315f54..9b8bd78 100644
--- a/include/configs/actux1.h
+++ b/include/configs/actux1.h
@@ -58,8 +58,6 @@
#if defined(CONFIG_CMD_KGDB)
# define CONFIG_KGDB_BAUDRATE 230400
-/* which serial port to use */
-# define CONFIG_KGDB_SER_INDEX 1
#endif
/* Miscellaneous configurable options */
diff --git a/include/configs/actux2.h b/include/configs/actux2.h
index fb391ec..f0cbff7 100644
--- a/include/configs/actux2.h
+++ b/include/configs/actux2.h
@@ -51,8 +51,6 @@
#if defined(CONFIG_CMD_KGDB)
# define CONFIG_KGDB_BAUDRATE 230400
-/* which serial port to use */
-# define CONFIG_KGDB_SER_INDEX 1
#endif
/* Miscellaneous configurable options */
diff --git a/include/configs/actux3.h b/include/configs/actux3.h
index 61d96f5..7639107 100644
--- a/include/configs/actux3.h
+++ b/include/configs/actux3.h
@@ -49,8 +49,6 @@
#if defined(CONFIG_CMD_KGDB)
# define CONFIG_KGDB_BAUDRATE 230400
-/* which serial port to use */
-# define CONFIG_KGDB_SER_INDEX 1
#endif
/* Miscellaneous configurable options */
diff --git a/include/configs/actux4.h b/include/configs/actux4.h
index 2387279..12bd98a 100644
--- a/include/configs/actux4.h
+++ b/include/configs/actux4.h
@@ -56,8 +56,6 @@
#if defined(CONFIG_CMD_KGDB)
# define CONFIG_KGDB_BAUDRATE 230400
-/* which serial port to use */
-# define CONFIG_KGDB_SER_INDEX 1
#endif
/* Miscellaneous configurable options */
diff --git a/include/configs/alpr.h b/include/configs/alpr.h
index 61fdeba..08bba36 100644
--- a/include/configs/alpr.h
+++ b/include/configs/alpr.h
@@ -349,7 +349,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/* pass open firmware flat tree */
diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h
index c9e9a03..0f38c92 100644
--- a/include/configs/amcc-common.h
+++ b/include/configs/amcc-common.h
@@ -125,7 +125,6 @@
*/
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port*/
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/ap325rxa.h b/include/configs/ap325rxa.h
index 933de52..462b2e2 100644
--- a/include/configs/ap325rxa.h
+++ b/include/configs/ap325rxa.h
@@ -11,8 +11,6 @@
#define __AP325RXA_H
#undef DEBUG
-#define CONFIG_SH 1
-#define CONFIG_SH4 1
#define CONFIG_CPU_SH7723 1
#define CONFIG_AP325RXA 1
diff --git a/include/configs/ap_sh4a_4a.h b/include/configs/ap_sh4a_4a.h
index 83a5c37..bb39491 100644
--- a/include/configs/ap_sh4a_4a.h
+++ b/include/configs/ap_sh4a_4a.h
@@ -10,9 +10,6 @@
#define __AP_SH4A_4A_H
#undef DEBUG
-#define CONFIG_SH 1
-#define CONFIG_SH4 1
-#define CONFIG_SH4A 1
#define CONFIG_CPU_SH7734 1
#define CONFIG_AP_SH4A_4A 1
#define CONFIG_400MHZ_MODE 1
diff --git a/include/configs/aria.h b/include/configs/aria.h
index 32216cd..b8d955a 100644
--- a/include/configs/aria.h
+++ b/include/configs/aria.h
@@ -507,7 +507,6 @@
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/arndale.h b/include/configs/arndale.h
index b7fb29e..7e367f3 100644
--- a/include/configs/arndale.h
+++ b/include/configs/arndale.h
@@ -85,6 +85,7 @@
#define CONFIG_DWMMC
#define CONFIG_EXYNOS_DWMMC
#define CONFIG_SUPPORT_EMMC_BOOT
+#define CONFIG_BOUNCE_BUFFER
#define CONFIG_BOARD_EARLY_INIT_F
diff --git a/include/configs/balloon3.h b/include/configs/balloon3.h
index d3d6274..b41a823 100644
--- a/include/configs/balloon3.h
+++ b/include/configs/balloon3.h
@@ -61,7 +61,6 @@
*/
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/bf506f-ezkit.h b/include/configs/bf506f-ezkit.h
index 5ad3ee7..eed2d5b 100644
--- a/include/configs/bf506f-ezkit.h
+++ b/include/configs/bf506f-ezkit.h
@@ -56,6 +56,7 @@
/*
* Flash Settings
*/
+
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_BASE 0x20000000
#define CONFIG_SYS_FLASH_CFI
@@ -63,7 +64,9 @@
#define CONFIG_SYS_MAX_FLASH_SECT 71
#define CONFIG_CMD_FLASH
#define CONFIG_MONITOR_IS_IN_RAM
-
+/*
+#define CONFIG_SYS_NO_FLASH
+*/
/*
* SPI Settings
@@ -71,11 +74,12 @@
#define CONFIG_BFIN_SPI
#define CONFIG_ENV_SPI_MAX_HZ 30000000
#define CONFIG_SF_DEFAULT_SPEED 30000000
+/*
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_STMICRO
#define CONFIG_CMD_SF
#define CONFIG_CMD_SPI
-
+*/
/*
* Env Storage Settings
diff --git a/include/configs/bf561-acvilon.h b/include/configs/bf561-acvilon.h
index ee585c0..15ca1af 100644
--- a/include/configs/bf561-acvilon.h
+++ b/include/configs/bf561-acvilon.h
@@ -53,7 +53,7 @@
#define CONFIG_EBIU_AMBCTL0_VAL 0xffc2ffc2
#define CONFIG_EBIU_AMBCTL1_VAL 0x99b35554
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
+#define CONFIG_SYS_MONITOR_LEN (384 * 1024)
#define CONFIG_SYS_MALLOC_LEN (128 * 1024)
diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h
index 404039a..fb6f948 100644
--- a/include/configs/bf561-ezkit.h
+++ b/include/configs/bf561-ezkit.h
@@ -90,6 +90,7 @@
*/
#define CONFIG_SYS_I2C_SOFT
#ifdef CONFIG_SYS_I2C_SOFT
+#define CONFIG_SYS_I2C
#define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF0
#define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF1
#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
diff --git a/include/configs/blackvme.h b/include/configs/blackvme.h
index cd37f9a..6e5774c 100644
--- a/include/configs/blackvme.h
+++ b/include/configs/blackvme.h
@@ -177,6 +177,7 @@
#define CONFIG_BAUDRATE 57600
#define CONFIG_LOADS_ECHO 1
#define CONFIG_UART_CONSOLE 0
+#define CONFIG_BFIN_SERIAL
/*
* U-Boot environment variables. Use "printenv" to examine.
diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h
index c1042ae..8182a75 100644
--- a/include/configs/cam_enc_4xx.h
+++ b/include/configs/cam_enc_4xx.h
@@ -236,6 +236,8 @@
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
#define CONFIG_SYS_NAND_ECCSIZE 0x200
#define CONFIG_SYS_NAND_ECCBYTES 10
+#define CONFIG_SYS_NAND_MAX_OOBFREE 2
+#define CONFIG_SYS_NAND_MAX_ECCPOS 56
#define CONFIG_SYS_NAND_OOBSIZE 64
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h
index 8f10eba..2838012 100644
--- a/include/configs/cm-bf537e.h
+++ b/include/configs/cm-bf537e.h
@@ -55,7 +55,7 @@
#define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3)
#define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3)
-#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
+#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
#define CONFIG_SYS_MALLOC_LEN (128 * 1024)
@@ -145,7 +145,7 @@
#define FLASHBOOT_ENV_SETTINGS \
"flashboot=flread 20040000 1000000 3c0000;" \
"bootm 0x1000000\0"
-
+#define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024))
/*
* Pull in common ADI header for remaining command/environment setup
diff --git a/include/configs/cm-bf537u.h b/include/configs/cm-bf537u.h
index a1c8e8a..da4cc67 100644
--- a/include/configs/cm-bf537u.h
+++ b/include/configs/cm-bf537u.h
@@ -54,7 +54,7 @@
#define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3)
#define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3)
-#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
+#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
#define CONFIG_SYS_MALLOC_LEN (128 * 1024)
@@ -142,6 +142,7 @@
#define FLASHBOOT_ENV_SETTINGS \
"flashboot=flread 20040000 1000000 300000;" \
"bootm 0x1000000\0"
+#define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024))
/*
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 4640c43..7729a02 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -316,6 +316,7 @@
/* Display Configuration */
#define CONFIG_OMAP3_GPIO_2
+#define CONFIG_OMAP3_GPIO_5
#define CONFIG_VIDEO_OMAP3
#define LCD_BPP LCD_COLOR16
diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h
index 556b42a..d1d732f 100644
--- a/include/configs/coreboot.h
+++ b/include/configs/coreboot.h
@@ -204,7 +204,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200
-#define CONFIG_KGDB_SER_INDEX 2
#endif
/*
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index 665295c..969b990 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -672,7 +672,6 @@
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/csb272.h b/include/configs/csb272.h
index ca0bffa..8a848be 100644
--- a/include/configs/csb272.h
+++ b/include/configs/csb272.h
@@ -99,7 +99,6 @@
*/
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/csb472.h b/include/configs/csb472.h
index 596095d..5c03417 100644
--- a/include/configs/csb472.h
+++ b/include/configs/csb472.h
@@ -98,7 +98,6 @@
*/
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 48b47cb..f210ed8 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -60,6 +60,7 @@
#define CONFIG_SPI_FLASH_SPANSION
#define CONFIG_CMD_SF
#define CONFIG_CMD_SPI
+#define CONFIG_SPI_FLASH_BAR
#define CONFIG_TI_SPI_MMAP
#define CONFIG_SF_DEFAULT_SPEED 48000000
#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3
diff --git a/include/configs/dvlhost.h b/include/configs/dvlhost.h
index 87b3314..1af7f16 100644
--- a/include/configs/dvlhost.h
+++ b/include/configs/dvlhost.h
@@ -57,8 +57,6 @@
#if defined(CONFIG_CMD_KGDB)
# define CONFIG_KGDB_BAUDRATE 230400
-/* which serial port to use */
-# define CONFIG_KGDB_SER_INDEX 1
#endif
/* Miscellaneous configurable options */
diff --git a/include/configs/ecovec.h b/include/configs/ecovec.h
index 3483cf1..3a5cc74 100644
--- a/include/configs/ecovec.h
+++ b/include/configs/ecovec.h
@@ -23,9 +23,6 @@
*/
#undef DEBUG
-#define CONFIG_SH 1
-#define CONFIG_SH4 1
-#define CONFIG_SH4A 1
#define CONFIG_CPU_SH7724 1
#define CONFIG_BOARD_LATE_INIT 1
#define CONFIG_ECOVEC 1
diff --git a/include/configs/espt.h b/include/configs/espt.h
index 1bd7eec..de16be7 100644
--- a/include/configs/espt.h
+++ b/include/configs/espt.h
@@ -10,8 +10,6 @@
#ifndef __ESPT_H
#define __ESPT_H
-#define CONFIG_SH 1
-#define CONFIG_SH4 1
#define CONFIG_CPU_SH7763 1
#define CONFIG_ESPT 1
#define __LITTLE_ENDIAN 1
diff --git a/include/configs/exynos5-dt.h b/include/configs/exynos5-dt.h
index d684790..414db42 100644
--- a/include/configs/exynos5-dt.h
+++ b/include/configs/exynos5-dt.h
@@ -98,6 +98,7 @@
#define CONFIG_DWMMC
#define CONFIG_EXYNOS_DWMMC
#define CONFIG_SUPPORT_EMMC_BOOT
+#define CONFIG_BOUNCE_BUFFER
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_SKIP_LOWLEVEL_INIT
diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h
index 7fa0c53..186fd35 100644
--- a/include/configs/ib62x0.h
+++ b/include/configs/ib62x0.h
@@ -28,6 +28,11 @@
#define CONFIG_MACH_TYPE MACH_TYPE_NAS6210
/*
+ * Enable device tree support
+ */
+#define CONFIG_OF_LIBFDT
+
+/*
* Compression configuration
*/
#define CONFIG_BZIP2
@@ -41,6 +46,7 @@
#define CONFIG_SYS_MVFS
#include <config_cmd_default.h>
#define CONFIG_CMD_ENV
+#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_IDE
#define CONFIG_CMD_MII
#define CONFIG_CMD_NAND
@@ -66,7 +72,7 @@
#define CONFIG_ENV_IS_NOWHERE
#endif
#define CONFIG_ENV_SIZE 0x20000
-#define CONFIG_ENV_OFFSET 0x80000
+#define CONFIG_ENV_OFFSET 0xe0000
/*
* Default environment variables
@@ -74,24 +80,26 @@
#define CONFIG_BOOTCOMMAND \
"setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
"ubi part root; " \
- "ubifsmount ubi:root; " \
+ "ubifsmount ubi:rootfs; " \
"ubifsload 0x800000 ${kernel}; " \
- "ubifsload 0x1100000 ${initrd}; " \
- "bootm 0x800000 0x1100000"
+ "ubifsload 0x700000 ${fdt}; " \
+ "ubifsumount; " \
+ "fdt addr 0x700000; fdt resize; fdt chosen; " \
+ "bootz 0x800000 - 0x700000"
-#define CONFIG_MTDPARTS \
- "mtdparts=orion_nand:" \
- "0x80000@0x0(uboot)," \
- "0x20000@0x80000(uboot_env)," \
- "-@0xa0000(root)\0"
+#define CONFIG_MTDPARTS \
+ "mtdparts=orion_nand:" \
+ "0xe0000@0x0(uboot)," \
+ "0x20000@0xe0000(uboot_env)," \
+ "-@0x100000(root)\0"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CONFIG_EXTRA_ENV_SETTINGS \
"console=console=ttyS0,115200\0" \
"mtdids=nand0=orion_nand\0" \
"mtdparts="CONFIG_MTDPARTS \
- "kernel=/boot/uImage\0" \
- "initrd=/boot/uInitrd\0" \
- "bootargs_root=ubi.mtd=2 root=ubi0:root rootfstype=ubifs\0"
+ "kernel=/boot/zImage\0" \
+ "fdt=/boot/ib62x0.dtb\0" \
+ "bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0"
/*
* Ethernet driver configuration
diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h
index 7700b38..50330cc 100644
--- a/include/configs/km/kmp204x-common.h
+++ b/include/configs/km/kmp204x-common.h
@@ -385,7 +385,6 @@
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
#define __USB_PHY_TYPE utmi
diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h
index 0e6073c..74c7232 100644
--- a/include/configs/km_kirkwood.h
+++ b/include/configs/km_kirkwood.h
@@ -35,6 +35,16 @@
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
#define CONFIG_KM_FPGA_CONFIG
+/* KM_KIRKWOOD_128M16 */
+#elif defined(CONFIG_KM_KIRKWOOD_128M16)
+#define CONFIG_IDENT_STRING "\nKeymile Kirkwood 128M16"
+#define CONFIG_HOSTNAME km_kirkwood_128m16
+#undef CONFIG_SYS_KWD_CONFIG
+#define CONFIG_SYS_KWD_CONFIG \
+ $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
+#define CONFIG_KM_DISABLE_PCIE
+#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
+
/* KM_NUSA */
#elif defined(CONFIG_KM_NUSA)
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
diff --git a/include/configs/korat.h b/include/configs/korat.h
index b09af19..811ff99 100644
--- a/include/configs/korat.h
+++ b/include/configs/korat.h
@@ -542,7 +542,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/* Pass open firmware flat tree */
diff --git a/include/configs/linkstation.h b/include/configs/linkstation.h
deleted file mode 100644
index fcd809d..0000000
--- a/include/configs/linkstation.h
+++ /dev/null
@@ -1,504 +0,0 @@
-/*
- * Copyright (C) 2006 Mihai Georgian <u-boot@linuxnotincluded.org.uk>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * Valid values for CONFIG_SYS_TEXT_BASE are:
- *
- * Standard configuration - all models
- * 0xFFF00000 boot from flash
- *
- * Test configuration (boot from RAM using uloader.o)
- * LinkStation HD-HLAN and KuroBox Standard
- * 0x03F00000 boot from RAM
- * LinkStation HD-HGLAN and KuroBox HG
- * 0x07F00000 boot from RAM
- */
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE 0xFFF00000
-#endif
-
-#if 0
-#define DEBUG
-#endif
-
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
-
-/*-----------------------------------------------------------------------
- * User configurable settings:
- * Mandatory settings:
- * CONFIG_IPADDR_LS - the IP address of the LinkStation
- * CONFIG_SERVERIP_LS - the address of the server for NFS/TFTP/DHCP/BOOTP
- * Optional settins:
- * CONFIG_NCIP_LS - the adress of the computer running net console
- * if not configured, it will be set to
- * CONFIG_SERVERIP_LS
- */
-
-
-#define CONFIG_IPADDR_LS 192.168.11.150
-#define CONFIG_SERVERIP_LS 192.168.11.149
-
-#if !defined(CONFIG_IPADDR_LS) || !defined(CONFIG_SERVERIP_LS)
-#error Both CONFIG_IPADDR_LS and CONFIG_SERVERIP_LS must be defined
-#endif
-
-#if !defined(CONFIG_NCIP_LS)
-#define CONFIG_NCIP_LS CONFIG_SERVERIP_LS
-#endif
-
-/*----------------------------------------------------------------------
- * DO NOT CHANGE ANYTHING BELOW, UNLESS YOU KNOW WHAT YOU ARE DOING
- *---------------------------------------------------------------------*/
-
-#define CONFIG_MPC8245 1
-#define CONFIG_LINKSTATION 1
-
-/*---------------------------------------
- * Supported models
- *
- * LinkStation HDLAN /KuroBox Standard (CONFIG_HLAN)
- * LinkStation old model (CONFIG_LAN) - totally untested
- * LinkStation HGLAN / KuroBox HG (CONFIG_HGLAN)
- *
- * Models not supported yet
- * TeraStatin (CONFIG_HTGL)
- */
-
-#if defined(CONFIG_HLAN) || defined(CONFIG_LAN)
-#define CONFIG_IDENT_STRING " LinkStation / KuroBox"
-#elif defined(CONFIG_HGLAN)
-#define CONFIG_IDENT_STRING " LinkStation HG / KuroBox HG"
-#elif defined(CONFIG_HTGL)
-#define CONFIG_IDENT_STRING " TeraStation"
-#else
-#error No LinkStation model defined
-#endif
-
-#define CONFIG_BOOTDELAY 5
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-#undef CONFIG_BOOT_RETRY_TIME
-
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT \
- "Boot in %02d seconds ('s' to stop)...", bootdelay
-#define CONFIG_AUTOBOOT_STOP_STR "s"
-
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_EXT2
-
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_NISDOMAIN
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_BOOTP_NTPSERVER
-#define CONFIG_BOOTP_TIMEOFFSET
-
-#define CONFIG_OF_LIBFDT 1
-
-#define OF_STDOUT_PATH "/soc10x/serial@80004600"
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <config_cmd_default.h>
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16 /* Max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* Default load address: 8 MB */
-
-#define CONFIG_BOOTCOMMAND "run bootcmd1"
-#define CONFIG_BOOTARGS "root=/dev/sda1 console=ttyS1,57600 netconsole=@192.168.1.7/eth0,@192.168.1.1/00:50:BF:A4:59:71 rtc-rs5c372.probe=0,0x32 debug"
-#define CONFIG_NFSBOOTCOMMAND "bootp;run nfsargs;bootm"
-
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-
-#if defined(CONFIG_HLAN) || defined(CONFIG_LAN)
-#define UBFILE "share/u-boot/u-boot-hd.flash.bin"
-#elif defined(CONFIG_HGLAN)
-#define UBFILE "share/u-boot/u-boot-hg.flash.bin"
-#elif defined(CONFIG_HTGL)
-#define UBFILE "share/u-boot/u-boot-ht.flash.bin"
-#else
-#error No LinkStation model defined
-#endif
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "autoload=no\0" \
- "stdin=nc\0" \
- "stdout=nc\0" \
- "stderr=nc\0" \
- "ipaddr="__stringify(CONFIG_IPADDR_LS)"\0" \
- "netmask=255.255.255.0\0" \
- "serverip="__stringify(CONFIG_SERVERIP_LS)"\0" \
- "ncip="__stringify(CONFIG_NCIP_LS)"\0" \
- "netretry=no\0" \
- "nc=setenv stdin nc;setenv stdout nc;setenv stderr nc\0" \
- "ser=setenv stdin serial;setenv stdout serial;setenv stderr serial\0" \
- "ldaddr=800000\0" \
- "hdpart=0:1\0" \
- "hdfile=boot/uImage\0" \
- "hdload=echo Loading ${hdpart}:${hdfile};ext2load ide ${hdpart} ${ldaddr} ${hdfile};ext2load ide ${hdpart} 7f0000 boot/kuroboxHG.dtb\0" \
- "boothd=setenv bootargs " CONFIG_BOOTARGS ";bootm ${ldaddr} - 7f0000\0" \
- "hdboot=run hdload;run boothd\0" \
- "flboot=setenv bootargs root=/dev/hda1;bootm ffc00000\0" \
- "emboot=setenv bootargs root=/dev/ram0;bootm ffc00000\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0" \
- "bootretry=30\0" \
- "bootcmd1=run hdboot;run flboot\0" \
- "bootcmd2=run flboot\0" \
- "bootcmd3=run emboot\0" \
- "writeng=protect off fff70000 fff7ffff;era fff70000 fff7ffff;mw.l 800000 4e474e47 1;cp.b 800000 fff70000 4\0" \
- "writeok=protect off fff70000 fff7ffff;era fff70000 fff7ffff;mw.l 800000 4f4b4f4b 1;cp.b 800000 fff70000 4\0" \
- "ubpart=0:3\0" \
- "ubfile="UBFILE"\0" \
- "ubload=echo Loading ${ubpart}:${ubfile};ext2load ide ${ubpart} ${ldaddr} ${ubfile}\0" \
- "ubsaddr=fff00000\0" \
- "ubeaddr=fff2ffff\0" \
- "ubflash=protect off ${ubsaddr} ${ubeaddr};era ${ubsaddr} ${ubeaddr};cp.b ${ldaddr} ${ubsaddr} ${filesize};cmp.b ${ldaddr} ${ubsaddr} ${filesize}\0" \
- "upgrade=run ubload ubflash\0"
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- */
-#define CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-/* Verified: CONFIG_PCI_PNP doesn't work */
-#undef CONFIG_PCI_PNP
-#define CONFIG_PCI_SCAN_SHOW
-
-#ifndef CONFIG_PCI_PNP
-/* Keep the following defines in sync with the BAT mappings */
-
-#define PCI_ETH_IOADDR 0xbfff00
-#define PCI_ETH_MEMADDR 0xbffffc00
-#define PCI_IDE_IOADDR 0xbffed0
-#define PCI_IDE_MEMADDR 0xbffffb00
-#define PCI_USB0_IOADDR 0
-#define PCI_USB0_MEMADDR 0xbfffe000
-#define PCI_USB1_IOADDR 0
-#define PCI_USB1_MEMADDR 0xbfffd000
-#define PCI_USB2_IOADDR 0
-#define PCI_USB2_MEMADDR 0xbfffcf00
-
-#endif
-
-/*-----------------------------------------------------------------------
- * Ethernet stuff
- */
-
-#if defined(CONFIG_LAN) || defined(CONFIG_HLAN)
-#define CONFIG_TULIP
-#define CONFIG_TULIP_USE_IO
-#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL)
-#define CONFIG_RTL8169
-#endif
-
-#define CONFIG_NET_RETRY_COUNT 5
-
-#define CONFIG_NETCONSOLE
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-
-#define CONFIG_SYS_FLASH_BASE 0xFFC00000
-#define CONFIG_SYS_FLASH_SIZE 0x00400000
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
-#define CONFIG_SYS_EUMB_ADDR 0x80000000
-#define CONFIG_SYS_PCI_MEM_ADDR 0xB0000000
-#define CONFIG_SYS_MISC_REGION_ADDR 0xFE000000
-
-#define CONFIG_SYS_MONITOR_LEN 0x00040000 /* 256 kB */
-#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve some kB for malloc() */
-
-#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00800000 /* 1M ... 8M in DRAM */
-
-/* Maximum amount of RAM */
-#if defined(CONFIG_HLAN) || defined(CONFIG_LAN)
-#define CONFIG_SYS_MAX_RAM_SIZE 0x04000000 /* 64MB of SDRAM */
-#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL)
-#define CONFIG_SYS_MAX_RAM_SIZE 0x08000000 /* 128MB of SDRAM */
-#else
-#error Unknown LinkStation type
-#endif
-
-/*-----------------------------------------------------------------------
- * Change CONFIG_SYS_TEXT_BASE in bord/linkstation/config.mk to get a RAM build
- *
- * RAM based builds are for testing purposes. A Linux module, uloader.o,
- * exists to load U-Boot and pass control to it
- *
- * Always do "make clean" after changing the build type
- */
-#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area
- */
-#if 1 /* RAM is available when the first C function is called */
-#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MAX_RAM_SIZE - 0x1000)
-#else
-#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
-#endif
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-/*----------------------------------------------------------------------
- * Serial configuration
- */
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 57600
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-
-#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_EUMB_ADDR + 0x4600) /* Console port */
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_EUMB_ADDR + 0x4500) /* AVR port */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- * For the detail description refer to the MPC8245 user's manual.
- *
- * Unless indicated otherwise, the values are
- * taken from the orignal Linkstation boot code
- *
- * Most of the low level configuration setttings are normally used
- * in arch/powerpc/cpu/mpc824x/cpu_init.c which is NOT used by this implementation.
- * Low level initialisation is done in board/linkstation/early_init.S
- * The values below are included for reference purpose only
- */
-
-/* FIXME: 32.768 MHz is the crystal frequency but */
-/* the real frequency is lower by about 0.75% */
-#define CONFIG_SYS_CLK_FREQ 32768000
-
-/* Bit-field values for MCCR1. */
-#define CONFIG_SYS_ROMNAL 0
-#define CONFIG_SYS_ROMFAL 11
-
-#define CONFIG_SYS_BANK0_ROW 2 /* Only bank 0 used: 13 x n x 4 */
-#define CONFIG_SYS_BANK1_ROW 0
-#define CONFIG_SYS_BANK2_ROW 0
-#define CONFIG_SYS_BANK3_ROW 0
-#define CONFIG_SYS_BANK4_ROW 0
-#define CONFIG_SYS_BANK5_ROW 0
-#define CONFIG_SYS_BANK6_ROW 0
-#define CONFIG_SYS_BANK7_ROW 0
-
-/* Bit-field values for MCCR2. */
-#define CONFIG_SYS_TSWAIT 0
-#if defined(CONFIG_LAN) || defined(CONFIG_HLAN)
-#define CONFIG_SYS_REFINT 0x15e0
-#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL)
-#define CONFIG_SYS_REFINT 0x1580
-#endif
-
-/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */
-#define CONFIG_SYS_BSTOPRE 0x91c
-
-/* Bit-field values for MCCR3. */
-#define CONFIG_SYS_REFREC 7
-
-/* Bit-field values for MCCR4. */
-#define CONFIG_SYS_PRETOACT 2
-#define CONFIG_SYS_ACTTOPRE 2 /* Original value was 2 */
-#define CONFIG_SYS_ACTORW 2
-#if defined(CONFIG_LAN) || defined(CONFIG_HLAN)
-#define CONFIG_SYS_SDMODE_CAS_LAT 2 /* For 100MHz bus */
-/*#define CONFIG_SYS_SDMODE_BURSTLEN 3*/
-#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL)
-#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* For 133MHz bus */
-/*#define CONFIG_SYS_SDMODE_BURSTLEN 2*/
-#endif
-#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
-#define CONFIG_SYS_EXTROM 1 /* Original setting but there is no EXTROM */
-#define CONFIG_SYS_REGDIMM 0
-#define CONFIG_SYS_DBUS_SIZE2 1
-#define CONFIG_SYS_SDMODE_WRAP 0
-
-#define CONFIG_SYS_PGMAX 0x32 /* All boards use this setting. Original 0x92 */
-#define CONFIG_SYS_SDRAM_DSCD 0x30
-
-/* Memory bank settings.
- * Only bits 20-29 are actually used from these vales to set the
- * start/end addresses. The upper two bits will always be 0, and the lower
- * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
- * address. Refer to the MPC8240 book.
- */
-
-#define CONFIG_SYS_BANK0_START 0x00000000
-#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1)
-#define CONFIG_SYS_BANK0_ENABLE 1
-#define CONFIG_SYS_BANK1_START 0x3ff00000
-#define CONFIG_SYS_BANK1_END 0x3fffffff
-#define CONFIG_SYS_BANK1_ENABLE 0
-#define CONFIG_SYS_BANK2_START 0x3ff00000
-#define CONFIG_SYS_BANK2_END 0x3fffffff
-#define CONFIG_SYS_BANK2_ENABLE 0
-#define CONFIG_SYS_BANK3_START 0x3ff00000
-#define CONFIG_SYS_BANK3_END 0x3fffffff
-#define CONFIG_SYS_BANK3_ENABLE 0
-#define CONFIG_SYS_BANK4_START 0x3ff00000
-#define CONFIG_SYS_BANK4_END 0x3fffffff
-#define CONFIG_SYS_BANK4_ENABLE 0
-#define CONFIG_SYS_BANK5_START 0x3ff00000
-#define CONFIG_SYS_BANK5_END 0x3fffffff
-#define CONFIG_SYS_BANK5_ENABLE 0
-#define CONFIG_SYS_BANK6_START 0x3ff00000
-#define CONFIG_SYS_BANK6_END 0x3fffffff
-#define CONFIG_SYS_BANK6_ENABLE 0
-#define CONFIG_SYS_BANK7_START 0x3ff00000
-#define CONFIG_SYS_BANK7_END 0x3fffffff
-#define CONFIG_SYS_BANK7_ENABLE 0
-
-#define CONFIG_SYS_ODCR 0x15
-
-/*----------------------------------------------------------------------
- * Initial BAT mappings
- */
-
-/* NOTES:
- * 1) GUARDED and WRITETHROUGH not allowed in IBATS
- * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT
- */
-
-/* SDRAM */
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_128M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-
-/* EUMB: 1MB of address space */
-#define CONFIG_SYS_IBAT1L (CONFIG_SYS_EUMB_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT1U (CONFIG_SYS_EUMB_ADDR | BATU_BL_1M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT1L (CONFIG_SYS_IBAT1L | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-
-/* PCI Mem: 256MB of address space */
-#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI_MEM_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI_MEM_ADDR | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT2L (CONFIG_SYS_IBAT2L | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
-
-/* PCI and local ROM/Flash: last 32MB of address space */
-#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_ADDR | BATU_BL_32M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT3L (CONFIG_SYS_IBAT3L | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- *
- * FIXME: This doesn't appear to be true for the newer kernels
- * which map more that 8 MB
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
-#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
-
-#undef CONFIG_SYS_FLASH_PROTECTION
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 72 /* Max number of sectors per flash */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 12000
-#define CONFIG_SYS_FLASH_WRITE_TOUT 1000
-
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
-#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
-
-#define CONFIG_ENV_IS_IN_FLASH
-/*
- * The original LinkStation flash organisation uses
- * 448 kB (0xFFF00000 - 0xFFF6FFFF) for the boot loader
- * We use the last sector of this area to store the environment
- * which leaves max. 384 kB for the U-Boot itself
- */
-#define CONFIG_ENV_ADDR 0xFFF60000
-#define CONFIG_ENV_SIZE 0x00010000
-#define CONFIG_ENV_SECT_SIZE 0x00010000
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * IDE/ATA definitions
- */
-#undef CONFIG_IDE_LED /* No IDE LED */
-#define CONFIG_IDE_RESET /* no reset for ide supported */
-#define CONFIG_IDE_PREINIT /* check for units */
-#define CONFIG_LBA48 /* 48 bit LBA supported */
-
-#if defined(CONFIG_LAN) || defined(CONFIG_HLAN) || defined(CONFIG_HGLAN)
-#define CONFIG_SYS_IDE_MAXBUS 1 /* Scan only 1 IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE 1 /* Only 1 drive per IDE bus */
-#elif defined(CONFIG_HGTL)
-#define CONFIG_SYS_IDE_MAXBUS 2 /* Max. 2 IDE busses */
-#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */
-#else
-#error Config IDE: Unknown LinkStation type
-#endif
-
-#define CONFIG_SYS_ATA_BASE_ADDR 0
-
-#define CONFIG_SYS_ATA_DATA_OFFSET 0 /* Offset for data I/O */
-#define CONFIG_SYS_ATA_REG_OFFSET 0 /* Offset for normal registers */
-#define CONFIG_SYS_ATA_ALT_OFFSET 0 /* Offset for alternate registers */
-
-/*-----------------------------------------------------------------------
- * Partitions and file system
- */
-#define CONFIG_DOS_PARTITION
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/lp8x4x.h b/include/configs/lp8x4x.h
index 8e58fea..a269372 100644
--- a/include/configs/lp8x4x.h
+++ b/include/configs/lp8x4x.h
@@ -93,7 +93,6 @@
*/
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h
index b87df54..4ffe165 100644
--- a/include/configs/lubbock.h
+++ b/include/configs/lubbock.h
@@ -86,7 +86,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index c348329..e9c8d8f 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -660,7 +660,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h
index 6501ea4..d415ecd 100644
--- a/include/configs/mecp5123.h
+++ b/include/configs/mecp5123.h
@@ -364,7 +364,6 @@
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h
index 4a8adf6..38337b4 100644
--- a/include/configs/mpc5121ads.h
+++ b/include/configs/mpc5121ads.h
@@ -520,7 +520,6 @@
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/mpq101.h b/include/configs/mpq101.h
index ec09e15..4cac8ee 100644
--- a/include/configs/mpq101.h
+++ b/include/configs/mpq101.h
@@ -345,7 +345,6 @@
#ifdef CONFIG_CMD_KGDB
# define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-# define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/mpr2.h b/include/configs/mpr2.h
index fcf237e..8ae497c 100644
--- a/include/configs/mpr2.h
+++ b/include/configs/mpr2.h
@@ -24,8 +24,6 @@
#define CONFIG_VERSION_VARIABLE
/* CPU and platform */
-#define CONFIG_SH 1
-#define CONFIG_SH3 1
#define CONFIG_CPU_SH7720 1
#define CONFIG_MPR2 1
diff --git a/include/configs/ms7720se.h b/include/configs/ms7720se.h
index ec8523e..585d68f 100644
--- a/include/configs/ms7720se.h
+++ b/include/configs/ms7720se.h
@@ -9,8 +9,6 @@
#ifndef __MS7720SE_H
#define __MS7720SE_H
-#define CONFIG_SH 1
-#define CONFIG_SH3 1
#define CONFIG_CPU_SH7720 1
#define CONFIG_MS7720SE 1
diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h
index 54fb7c3..1c8ada6 100644
--- a/include/configs/ms7722se.h
+++ b/include/configs/ms7722se.h
@@ -9,8 +9,6 @@
#ifndef __MS7722SE_H
#define __MS7722SE_H
-#define CONFIG_SH 1
-#define CONFIG_SH4 1
#define CONFIG_CPU_SH7722 1
#define CONFIG_MS7722SE 1
diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h
index eea3bd1..4cf8efe 100644
--- a/include/configs/ms7750se.h
+++ b/include/configs/ms7750se.h
@@ -9,8 +9,6 @@
#ifndef __MS7750SE_H
#define __MS7750SE_H
-#define CONFIG_SH 1
-#define CONFIG_SH4 1
#define CONFIG_CPU_SH7750 1
/* #define CONFIG_CPU_SH7751 1 */
/* #define CONFIG_CPU_TYPE_R 1 */
diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h
deleted file mode 100644
index c15d546..0000000
--- a/include/configs/mx1ads.h
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * include/configs/mx1ads.h
- *
- * (c) Copyright 2004
- * Techware Information Technology, Inc.
- * http://www.techware.com.tw/
- *
- * Ming-Len Wu <minglen_wu@techware.com.tw>
- *
- * This is the Configuration setting for Motorola MX1ADS board
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
-#define CONFIG_IMX 1 /* It's a Motorola MC9328 SoC */
-#define CONFIG_MX1ADS 1 /* on a Motorola MX1ADS Board */
-
-/*
- * Select serial console configuration
- */
-#define CONFIG_IMX_SERIAL
-#define CONFIG_IMX_SERIAL1 /* internal uart 1 */
-/* #define _CONFIG_UART2 */ /* internal uart 2 */
-/* #define CONFIG_SILENT_CONSOLE */ /* use this to disable output */
-
-#define CONFIG_BOARD_LATE_INIT
-#define USE_920T_MMU 1
-
-#if 0
-#define CONFIG_SYS_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */
-#define CONFIG_SYS_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */
-#define CONFIG_SYS_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */
-#endif
-
-/*
- * Size of malloc() pool
- */
-
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * CS8900 Ethernet drivers
- */
-#define CONFIG_CS8900 /* we have a CS8900 on-board */
-#define CONFIG_CS8900_BASE 0x15000300
-#define CONFIG_CS8900_BUS16 /* the Linux driver does accesses as shorts */
-
-/*
- * select serial console configuration
- */
-
-/* #define CONFIG_UART1 */
-/* #define CONFIG_UART2 1 */
-
-#define CONFIG_BAUDRATE 115200
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_ELF
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "root=/dev/msdk mem=48M"
-#define CONFIG_BOOTFILE "mx1ads"
-#define CONFIG_BOOTCOMMAND "tftp; bootm"
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
- /* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-
-#define CONFIG_SYS_HUSH_PARSER 1
-
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT "MX1ADS$ " /* Monitor Command Prompt */
-#else
-#define CONFIG_SYS_PROMPT "MX1ADS=> " /* Monitor Command Prompt */
-#endif
-
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
- /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x09000000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0AF00000 /* 63 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x08800000 /* default load address */
-#define CONFIG_SYS_HZ 3686400
-#define CONFIG_SYS_CPUSPEED 0x141
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */
-#define PHYS_SDRAM_1 0x08000000 /* SDRAM on CSD0 */
-#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-
-#define CONFIG_SYS_TEXT_BASE 0x10000000
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR 0x00300000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x000FFFFF
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_GBL_DATA_OFFSET)
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* 1 bank of SyncFlash */
-#define CONFIG_SYS_FLASH_BASE 0x0C000000 /* SyncFlash on CSD1 */
-#define FLASH_BANK_SIZE 0x01000000 /* 16 MB Total */
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-#define CONFIG_SYNCFLASH 1
-#define PHYS_FLASH_SIZE 0x01000000
-#define CONFIG_SYS_MAX_FLASH_SECT (16)
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+0x00ff8000)
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SIZE 0x04000 /* Total Size of Environment Sector */
-#define CONFIG_ENV_SECT_SIZE 0x100000
-
-/*-----------------------------------------------------------------------
- * Enable passing ATAGS
- */
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-
-#define CONFIG_SYS_CLK_FREQ 16780000
-#define CONFIG_SYSPLL_CLK_FREQ 16000000
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h
deleted file mode 100644
index f749740..0000000
--- a/include/configs/omap3_zoom2.h
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * (C) Copyright 2006-2009
- * Texas Instruments.
- * Richard Woodruff <r-woodruff2@ti.com>
- * Syed Mohammed Khasim <x0khasim@ti.com>
- * Nishanth Menon <nm@ti.com>
- * Tom Rix <Tom.Rix@windriver.com>
- *
- * Configuration settings for the TI OMAP3430 Zoom II board.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_OMAP 1 /* in a TI OMAP core */
-#define CONFIG_OMAP34XX 1 /* which is a 34XX */
-#define CONFIG_OMAP3_ZOOM2 1 /* working with Zoom II */
-#define CONFIG_OMAP_GPIO
-#define CONFIG_OMAP_COMMON
-
-#define CONFIG_SDRC /* The chip has SDRC controller */
-
-#include <asm/arch/cpu.h> /* get chip and board defs */
-#include <asm/arch/omap3.h>
-
-/*
- * Display CPU and Board information
- */
-#define CONFIG_DISPLAY_CPUINFO 1
-#define CONFIG_DISPLAY_BOARDINFO 1
-
-/* Clock Defines */
-#define V_OSCK 26000000 /* Clock output from T2 */
-#define V_SCLK (V_OSCK >> 1)
-
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-#define CONFIG_REVISION_TAG 1
-
-#define CONFIG_OF_LIBFDT 1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
- /* Sector */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
-/*
- * Hardware drivers
- */
-
-/*
- * NS16550 Configuration
- * Zoom2 uses the TL16CP754C on the debug board
- */
-/*
- * 0 - 1 : first USB with respect to the left edge of the debug board
- * 2 - 3 : second USB with respect to the left edge of the debug board
- */
-#define ZOOM2_DEFAULT_SERIAL_DEVICE 0
-
-#define V_NS16550_CLK (1843200) /* 1.8432 Mhz */
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_REG_SIZE (-2)
-#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200}
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_GENERIC_MMC 1
-#define CONFIG_MMC 1
-#define CONFIG_OMAP_HSMMC 1
-#define CONFIG_DOS_PARTITION 1
-
-/* Status LED */
-#define CONFIG_STATUS_LED 1 /* Status LED enabled */
-#define CONFIG_BOARD_SPECIFIC_LED 1
-#define STATUS_LED_BLUE 0
-#define STATUS_LED_RED 1
-/* Blue */
-#define STATUS_LED_BIT STATUS_LED_BLUE
-#define STATUS_LED_STATE STATUS_LED_ON
-#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
-/* Red */
-#define STATUS_LED_BIT1 STATUS_LED_RED
-#define STATUS_LED_STATE1 STATUS_LED_OFF
-#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
-/* Optional value */
-#define STATUS_LED_BOOT STATUS_LED_BIT
-
-/* GPIO banks */
-#ifdef CONFIG_STATUS_LED
-#define CONFIG_OMAP3_GPIO_2 /* ZOOM2_LED_BLUE2 */
-#define CONFIG_OMAP3_GPIO_6 /* ZOOM2_LED_RED */
-#endif
-#define CONFIG_OMAP3_GPIO_3 /* board revision */
-#define CONFIG_OMAP3_GPIO_5 /* debug board detection, ZOOM2_LED_BLUE */
-
-/* USB */
-#define CONFIG_MUSB_UDC 1
-#define CONFIG_USB_OMAP3 1
-#define CONFIG_TWL4030_USB 1
-
-/* USB device configuration */
-#define CONFIG_USB_DEVICE 1
-#define CONFIG_USB_TTY 1
-/* Change these to suit your needs */
-#define CONFIG_USBD_VENDORID 0x0451
-#define CONFIG_USBD_PRODUCTID 0x5678
-#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
-#define CONFIG_USBD_PRODUCT_NAME "Zoom2"
-
-/* commands to include */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_FAT /* FAT support */
-#define CONFIG_CMD_I2C /* I2C serial bus support */
-#define CONFIG_CMD_MMC /* MMC support */
-#define CONFIG_CMD_NAND /* NAND support */
-#define CONFIG_CMD_NAND_LOCK_UNLOCK /* Enable lock/unlock support */
-
-#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
-#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
-#undef CONFIG_CMD_IMI /* iminfo */
-#undef CONFIG_CMD_IMLS /* List all found images */
-#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
-#undef CONFIG_CMD_NFS /* NFS support */
-
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
-#define CONFIG_SYS_I2C_OMAP34XX
-
-/*
- * TWL4030
- */
-#define CONFIG_TWL4030_POWER 1
-#define CONFIG_TWL4030_LED 1
-
-/*
- * Board NAND Info.
- */
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
- /* to access nand */
-#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
- /* to access nand at */
- /* CS0 */
-#define GPMC_NAND_ECC_LP_x16_LAYOUT 1
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-
-/* Environment information */
-#define CONFIG_BOOTDELAY 10
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "usbtty=cdc_acm\0" \
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
-#define CONFIG_SYS_INIT_RAM_SIZE 0x800
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-/*
- * Miscellaneous configurable options
- */
-
-#define CONFIG_SYS_PROMPT "OMAP3 Zoom2 # "
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_CBSIZE 512
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
-/* Memtest from start of memory to 31MB */
-#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
-#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x01F00000)
-/* The default load address is the start of memory */
-#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0)
-/* everything, incl board info, in Hz */
-#undef CONFIG_SYS_CLKS_IN_HZ
-/*
- * 2430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by
- * 32KHz clk, or from external sig. This rate is divided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
-#define CONFIG_SYS_PTV 7 /* 2^(PTV+1) */
-#define CONFIG_SYS_HZ ((V_SCLK) / (2 << CONFIG_SYS_PTV))
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
-#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-/* **** PISMO SUPPORT *** */
-
-/* Configure the PISMO */
-#define PISMO1_NAND_SIZE GPMC_SIZE_128M
-#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
-
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
-
-#if defined(CONFIG_CMD_NAND)
-#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE
-#endif
-
-/* Monitor at start of flash */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-
-#define CONFIG_ENV_IS_IN_NAND 1
-#define SMNAND_ENV_OFFSET 0x0c0000 /* environment starts here */
-
-#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
-#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
-#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
-
-#define CONFIG_SYS_CACHELINE_SIZE 64
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h
index c48790d..376dfdb 100644
--- a/include/configs/omap5912osk.h
+++ b/include/configs/omap5912osk.h
@@ -94,7 +94,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
#endif
/*
diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index 2f128b8..76c5106 100644
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -36,6 +36,7 @@
#define CONFIG_EFI_PARTITION
#define CONFIG_PARTITION_UUIDS
#define CONFIG_CMD_PART
+#define CONFIG_HSMMC2_8BIT
/* Required support for the TCA642X GPIO we have on the uEVM */
#define CONFIG_TCA642X
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 57ed019..c6df11b 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -928,7 +928,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h
index 3fde7ca..1fdd602 100644
--- a/include/configs/p3p440.h
+++ b/include/configs/p3p440.h
@@ -303,6 +303,5 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
#endif /* __CONFIG_H */
diff --git a/include/configs/palmld.h b/include/configs/palmld.h
index a5b6e3a..2a9fd22 100644
--- a/include/configs/palmld.h
+++ b/include/configs/palmld.h
@@ -93,7 +93,6 @@
*/
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/palmtc.h b/include/configs/palmtc.h
index 7303e1c..de25407 100644
--- a/include/configs/palmtc.h
+++ b/include/configs/palmtc.h
@@ -95,7 +95,6 @@
*/
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/palmtreo680.h b/include/configs/palmtreo680.h
index adf8519..3662663 100644
--- a/include/configs/palmtreo680.h
+++ b/include/configs/palmtreo680.h
@@ -94,7 +94,6 @@
*/
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
index 400cb3e..5a5fe7f 100644
--- a/include/configs/pcs440ep.h
+++ b/include/configs/pcs440ep.h
@@ -427,7 +427,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*-----------------------------------------------------------------------
diff --git a/include/configs/pdm360ng.h b/include/configs/pdm360ng.h
index 266d107..2a54e5c 100644
--- a/include/configs/pdm360ng.h
+++ b/include/configs/pdm360ng.h
@@ -441,7 +441,6 @@
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/* POST support */
diff --git a/include/configs/pxa-common.h b/include/configs/pxa-common.h
index 5856ee1..f0ecc34 100644
--- a/include/configs/pxa-common.h
+++ b/include/configs/pxa-common.h
@@ -16,7 +16,6 @@
*/
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 230400
-#define CONFIG_KGDB_SER_INDEX 2
#endif
/*
diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h
index 84ad006..af7c076 100644
--- a/include/configs/pxa255_idp.h
+++ b/include/configs/pxa255_idp.h
@@ -199,7 +199,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h
index 7b04e0c..20d6178 100644
--- a/include/configs/quad100hd.h
+++ b/include/configs/quad100hd.h
@@ -265,7 +265,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/* ENVIRONMENT VARS */
diff --git a/include/configs/r0p7734.h b/include/configs/r0p7734.h
index dd26a71..53128ec 100644
--- a/include/configs/r0p7734.h
+++ b/include/configs/r0p7734.h
@@ -10,9 +10,6 @@
#define __R0P7734_H
#undef DEBUG
-#define CONFIG_SH 1
-#define CONFIG_SH4 1
-#define CONFIG_SH4A 1
#define CONFIG_CPU_SH7734 1
#define CONFIG_R0P7734 1
#define CONFIG_400MHZ_MODE 1
diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h
index ddcc975..24d0c34 100644
--- a/include/configs/r2dplus.h
+++ b/include/configs/r2dplus.h
@@ -3,8 +3,6 @@
#undef DEBUG
-#define CONFIG_SH 1
-#define CONFIG_SH4 1
#define CONFIG_CPU_SH7751 1
#define CONFIG_CPU_SH_TYPE_R 1
#define CONFIG_R2DPLUS 1
diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h
index f5e4daa..8156724 100644
--- a/include/configs/r7780mp.h
+++ b/include/configs/r7780mp.h
@@ -11,8 +11,6 @@
#define __R7780RP_H
#undef DEBUG
-#define CONFIG_SH 1
-#define CONFIG_SH4A 1
#define CONFIG_CPU_SH7780 1
#define CONFIG_R7780MP 1
#define CONFIG_SYS_R7780MP_OLD_FLASH 1
diff --git a/include/configs/rsdproto.h b/include/configs/rsdproto.h
index f144f84..92318c3 100644
--- a/include/configs/rsdproto.h
+++ b/include/configs/rsdproto.h
@@ -121,7 +121,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/rsk7203.h b/include/configs/rsk7203.h
index acee4e8..5436324 100644
--- a/include/configs/rsk7203.h
+++ b/include/configs/rsk7203.h
@@ -11,8 +11,6 @@
#define __RSK7203_H
#undef DEBUG
-#define CONFIG_SH 1
-#define CONFIG_SH2 1
#define CONFIG_SH2A 1
#define CONFIG_CPU_SH7203 1
#define CONFIG_RSK7203 1
@@ -87,7 +85,7 @@
#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CMT_CLK_DIVIDER 32 /* 8 (default), 32, 128 or 512 */
-#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
+#define CONFIG_SH_CMT_CLK_FREQ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
/* Network interface */
#define CONFIG_SMC911X
diff --git a/include/configs/rsk7264.h b/include/configs/rsk7264.h
index a5dbb64..4aaa3ef 100644
--- a/include/configs/rsk7264.h
+++ b/include/configs/rsk7264.h
@@ -12,8 +12,6 @@
#define __RSK7264_H
#undef DEBUG
-#define CONFIG_SH 1
-#define CONFIG_SH2 1
#define CONFIG_SH2A 1
#define CONFIG_CPU_SH7264 1
#define CONFIG_RSK7264 1
@@ -67,7 +65,7 @@
#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CMT_CLK_DIVIDER 32 /* 8 (default), 32, 128 or 512 */
-#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
+#define CONFIG_SH_CMT_CLK_FREQ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
/* Network interface */
#define CONFIG_SMC911X
diff --git a/include/configs/rsk7269.h b/include/configs/rsk7269.h
index 9f54160..11fc231 100644
--- a/include/configs/rsk7269.h
+++ b/include/configs/rsk7269.h
@@ -11,8 +11,6 @@
#define __RSK7269_H
#undef DEBUG
-#define CONFIG_SH 1
-#define CONFIG_SH2 1
#define CONFIG_SH2A 1
#define CONFIG_CPU_SH7269 1
#define CONFIG_RSK7269 1
@@ -66,7 +64,7 @@
#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CMT_CLK_DIVIDER 32 /* 8 (default), 32, 128 or 512 */
-#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
+#define CONFIG_SH_CMT_CLK_FREQ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
/* Network interface */
#define CONFIG_SMC911X
diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
index 7e78a23..a6d5582 100644
--- a/include/configs/sandbox.h
+++ b/include/configs/sandbox.h
@@ -39,6 +39,9 @@
#define CONFIG_CMD_FAT
#define CONFIG_CMD_EXT4
#define CONFIG_CMD_EXT4_WRITE
+#define CONFIG_CMD_PART
+#define CONFIG_DOS_PARTITION
+#define CONFIG_HOST_MAX_DEVICES 4
#define CONFIG_SYS_VSNPRINTF
@@ -126,4 +129,6 @@
#define CONFIG_LZO
#define CONFIG_LZMA
+#define CONFIG_TPM_TIS_SANDBOX
+
#endif
diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index a258fe8..b7f83e0 100644
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -643,7 +643,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h
index bdb8eb5..4912d69 100644
--- a/include/configs/sbc8548.h
+++ b/include/configs/sbc8548.h
@@ -575,7 +575,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h
index dba948a..78f8219 100644
--- a/include/configs/sbc8641d.h
+++ b/include/configs/sbc8641d.h
@@ -523,7 +523,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/sh7752evb.h b/include/configs/sh7752evb.h
index ebdc5c8..f06abbc 100644
--- a/include/configs/sh7752evb.h
+++ b/include/configs/sh7752evb.h
@@ -10,8 +10,6 @@
#define __SH7752EVB_H
#undef DEBUG
-#define CONFIG_SH 1
-#define CONFIG_SH4A 1
#define CONFIG_SH_32BIT 1
#define CONFIG_CPU_SH7752 1
#define CONFIG_SH7752EVB 1
diff --git a/include/configs/sh7753evb.h b/include/configs/sh7753evb.h
new file mode 100644
index 0000000..e400db0
--- /dev/null
+++ b/include/configs/sh7753evb.h
@@ -0,0 +1,135 @@
+/*
+ * Configuation settings for the sh7753evb board
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __SH7753EVB_H
+#define __SH7753EVB_H
+
+#undef DEBUG
+#define CONFIG_SH_32BIT 1
+#define CONFIG_CPU_SH7753 1
+#define CONFIG_SH7753EVB 1
+
+#define CONFIG_SYS_TEXT_BASE 0x5ff80000
+#define CONFIG_SYS_LDSCRIPT "board/renesas/sh7753evb/u-boot.lds"
+
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_DFL
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_MD5SUM
+#define CONFIG_MD5
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_EXT2
+#define CONFIG_DOS_PARTITION
+#define CONFIG_MAC_PARTITION
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTARGS "console=ttySC2,115200 root=/dev/nfs ip=dhcp"
+
+#define CONFIG_VERSION_VARIABLE
+#undef CONFIG_SHOW_BOOT_PROGRESS
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+
+/* MEMORY */
+#define SH7753EVB_SDRAM_BASE (0x40000000)
+#define SH7753EVB_SDRAM_SIZE (512 * 1024 * 1024)
+
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_PBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_BARGSIZE 512
+#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
+
+/* SCIF */
+#define CONFIG_SCIF_CONSOLE 1
+#define CONFIG_CONS_SCIF2 1
+#undef CONFIG_SYS_CONSOLE_INFO_QUIET
+#undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE
+
+#define CONFIG_SYS_MEMTEST_START (SH7753EVB_SDRAM_BASE)
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
+ 480 * 1024 * 1024)
+#undef CONFIG_SYS_ALT_MEMTEST
+#undef CONFIG_SYS_MEMTEST_SCRATCH
+#undef CONFIG_SYS_LOADS_BAUD_CHANGE
+
+#define CONFIG_SYS_SDRAM_BASE (SH7753EVB_SDRAM_BASE)
+#define CONFIG_SYS_SDRAM_SIZE (SH7753EVB_SDRAM_SIZE)
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + \
+ 128 * 1024 * 1024)
+
+#define CONFIG_SYS_MONITOR_BASE 0x00000000
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
+#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
+#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
+
+/* FLASH */
+#define CONFIG_SYS_NO_FLASH
+
+/* Ether */
+#define CONFIG_SH_ETHER 1
+#define CONFIG_SH_ETHER_USE_PORT 0
+#define CONFIG_SH_ETHER_PHY_ADDR 18
+#define CONFIG_SH_ETHER_CACHE_WRITEBACK 1
+#define CONFIG_SH_ETHER_USE_GETHER 1
+#define CONFIG_PHYLIB
+#define CONFIG_BITBANGMII
+#define CONFIG_BITBANGMII_MULTI
+#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RGMII
+#define CONFIG_PHY_VITESSE
+
+#define SH7753EVB_ETHERNET_MAC_BASE_SPI 0x00090000
+#define SH7753EVB_SPI_SECTOR_SIZE (64 * 1024)
+#define SH7753EVB_ETHERNET_MAC_BASE SH7753EVB_ETHERNET_MAC_BASE_SPI
+#define SH7753EVB_ETHERNET_MAC_SIZE 17
+#define SH7753EVB_ETHERNET_NUM_CH 2
+#define CONFIG_BOARD_LATE_INIT
+
+/* SPI */
+#define CONFIG_SH_SPI 1
+#define CONFIG_SH_SPI_BASE 0xfe002000
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO 1
+#define CONFIG_SPI_FLASH_MACRONIX 1
+
+/* MMCIF */
+#define CONFIG_MMC 1
+#define CONFIG_GENERIC_MMC 1
+#define CONFIG_SH_MMCIF 1
+#define CONFIG_SH_MMCIF_ADDR 0xffcb0000
+#define CONFIG_SH_MMCIF_CLK 48000000
+
+/* ENV setting */
+#define CONFIG_ENV_IS_EMBEDDED
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SECT_SIZE (64 * 1024)
+#define CONFIG_ENV_ADDR (0x00080000)
+#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR)
+#define CONFIG_ENV_OVERWRITE 1
+#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE)
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netboot=bootp; bootm\0"
+
+/* Board Clock */
+#define CONFIG_SYS_CLK_FREQ 48000000
+#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
+#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
+#define CONFIG_SYS_TMU_CLK_DIV 4
+#endif /* __SH7753EVB_H */
diff --git a/include/configs/sh7757lcr.h b/include/configs/sh7757lcr.h
index ce1add2..08bff1d 100644
--- a/include/configs/sh7757lcr.h
+++ b/include/configs/sh7757lcr.h
@@ -10,8 +10,6 @@
#define __SH7757LCR_H
#undef DEBUG
-#define CONFIG_SH 1
-#define CONFIG_SH4A 1
#define CONFIG_SH_32BIT 1
#define CONFIG_CPU_SH7757 1
#define CONFIG_SH7757LCR 1
diff --git a/include/configs/sh7763rdp.h b/include/configs/sh7763rdp.h
index a137788..2438318 100644
--- a/include/configs/sh7763rdp.h
+++ b/include/configs/sh7763rdp.h
@@ -10,8 +10,6 @@
#ifndef __SH7763RDP_H
#define __SH7763RDP_H
-#define CONFIG_SH 1
-#define CONFIG_SH4 1
#define CONFIG_CPU_SH7763 1
#define CONFIG_SH7763RDP 1
#define __LITTLE_ENDIAN 1
diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h
index 4acbcab..2723eaf 100644
--- a/include/configs/sh7785lcr.h
+++ b/include/configs/sh7785lcr.h
@@ -10,8 +10,6 @@
#define __SH7785LCR_H
#undef DEBUG
-#define CONFIG_SH 1
-#define CONFIG_SH4A 1
#define CONFIG_CPU_SH7785 1
#define CONFIG_SH7785LCR 1
diff --git a/include/configs/shmin.h b/include/configs/shmin.h
index 5c990fc..f8155ef 100644
--- a/include/configs/shmin.h
+++ b/include/configs/shmin.h
@@ -9,8 +9,6 @@
#ifndef __SHMIN_H
#define __SHMIN_H
-#define CONFIG_SH 1
-#define CONFIG_SH3 1
#define CONFIG_CPU_SH7706 1
/* T-SH7706LAN */
#define CONFIG_SHMIN 1
diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h
index a87444e..d4ae19f 100644
--- a/include/configs/smdk2410.h
+++ b/include/configs/smdk2410.h
@@ -101,8 +101,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index 0e6b864..fd590e4 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -363,7 +363,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port*/
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index ee1f1f3..2a9c9a3 100644
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -341,7 +341,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*Note: change below for your network setting!!! */
diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index 63dd767..d0cb68a 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -376,7 +376,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*Note: change below for your network setting!!! */
diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h
index d9b0ed0..54a5e3e 100644
--- a/include/configs/t4qds.h
+++ b/include/configs/t4qds.h
@@ -303,7 +303,6 @@
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index 439fc47..d44b5c0 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -224,6 +224,7 @@
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_CONSOLE
#define CONFIG_SPL_NAND_SIMPLE
+#define CONFIG_SPL_NAND_SOFTECC
#define CONFIG_SPL_NAND_WORKSPACE 0x8f07f000 /* below BSS */
#define CONFIG_SPL_LIBCOMMON_SUPPORT
diff --git a/include/configs/tcm-bf537.h b/include/configs/tcm-bf537.h
index 627836a..58bcdc8 100644
--- a/include/configs/tcm-bf537.h
+++ b/include/configs/tcm-bf537.h
@@ -55,7 +55,7 @@
#define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3)
#define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3)
-#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
+#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
#define CONFIG_SYS_MALLOC_LEN (128 * 1024)
@@ -144,6 +144,7 @@
#define FLASHBOOT_ENV_SETTINGS \
"flashboot=flread 20040000 1000000 300000;" \
"bootm 0x1000000\0"
+#define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024))
/*
diff --git a/include/configs/trats.h b/include/configs/trats.h
index 0877142..6cd15c2 100644
--- a/include/configs/trats.h
+++ b/include/configs/trats.h
@@ -99,6 +99,7 @@
#define CONFIG_THOR_FUNCTION
#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M
+#define DFU_DEFAULT_POLL_TIMEOUT 300
#define CONFIG_DFU_FUNCTION
#define CONFIG_DFU_MMC
diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h
index 0615117..b7804d2 100644
--- a/include/configs/trizepsiv.h
+++ b/include/configs/trizepsiv.h
@@ -125,7 +125,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/twister.h b/include/configs/twister.h
index b6ca59c..f24dc13 100644
--- a/include/configs/twister.h
+++ b/include/configs/twister.h
@@ -50,4 +50,7 @@
#define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_SDRAM_1 + 0x100)
#define CONFIG_SPL_BOARD_INIT
+/* gpio 55 is used as SPL_OS_BOOT_KEY */
+#define CONFIG_OMAP3_GPIO_2
+
#endif /* __CONFIG_H */
diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h
new file mode 100644
index 0000000..ce5f384
--- /dev/null
+++ b/include/configs/vexpress_aemv8a.h
@@ -0,0 +1,189 @@
+/*
+ * Configuration for Versatile Express. Parts were derived from other ARM
+ * configurations.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __VEXPRESS_AEMV8A_H
+#define __VEXPRESS_AEMV8A_H
+
+#define DEBUG
+
+#define CONFIG_REMAKE_ELF
+
+/*#define CONFIG_ARMV8_SWITCH_TO_EL1*/
+
+/*#define CONFIG_SYS_GENERIC_BOARD*/
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_SUPPORT_RAW_INITRD
+
+/* Cache Definitions */
+#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_SYS_ICACHE_OFF
+
+#define CONFIG_IDENT_STRING " vexpress_aemv8a"
+#define CONFIG_BOOTP_VCI_STRING "U-boot.armv8.vexpress_aemv8a"
+
+/* Link Definitions */
+#define CONFIG_SYS_TEXT_BASE 0x80000000
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
+
+/* Flat Device Tree Definitions */
+#define CONFIG_OF_LIBFDT
+
+#define CONFIG_DEFAULT_DEVICE_TREE vexpress64
+
+/* SMP Spin Table Definitions */
+#define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
+
+/* CS register bases for the original memory map. */
+#define V2M_PA_CS0 0x00000000
+#define V2M_PA_CS1 0x14000000
+#define V2M_PA_CS2 0x18000000
+#define V2M_PA_CS3 0x1c000000
+#define V2M_PA_CS4 0x0c000000
+#define V2M_PA_CS5 0x10000000
+
+#define V2M_PERIPH_OFFSET(x) (x << 16)
+#define V2M_SYSREGS (V2M_PA_CS3 + V2M_PERIPH_OFFSET(1))
+#define V2M_SYSCTL (V2M_PA_CS3 + V2M_PERIPH_OFFSET(2))
+#define V2M_SERIAL_BUS_PCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(3))
+
+#define V2M_BASE 0x80000000
+
+/*
+ * Physical addresses, offset from V2M_PA_CS0-3
+ */
+#define V2M_NOR0 (V2M_PA_CS0)
+#define V2M_NOR1 (V2M_PA_CS4)
+#define V2M_SRAM (V2M_PA_CS1)
+
+/* Common peripherals relative to CS7. */
+#define V2M_AACI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(4))
+#define V2M_MMCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(5))
+#define V2M_KMI0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(6))
+#define V2M_KMI1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(7))
+
+#define V2M_UART0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(9))
+#define V2M_UART1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(10))
+#define V2M_UART2 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(11))
+#define V2M_UART3 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(12))
+
+#define V2M_WDT (V2M_PA_CS3 + V2M_PERIPH_OFFSET(15))
+
+#define V2M_TIMER01 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(17))
+#define V2M_TIMER23 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(18))
+
+#define V2M_SERIAL_BUS_DVI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(22))
+#define V2M_RTC (V2M_PA_CS3 + V2M_PERIPH_OFFSET(23))
+
+#define V2M_CF (V2M_PA_CS3 + V2M_PERIPH_OFFSET(26))
+
+#define V2M_CLCD (V2M_PA_CS3 + V2M_PERIPH_OFFSET(31))
+
+/* System register offsets. */
+#define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0)
+#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4)
+#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8)
+
+/* Generic Timer Definitions */
+#define COUNTER_FREQUENCY (0x1800000) /* 24MHz */
+
+/* Generic Interrupt Controller Definitions */
+#define GICD_BASE (0x2C001000)
+#define GICC_BASE (0x2C002000)
+
+#define CONFIG_SYS_MEMTEST_START V2M_BASE
+#define CONFIG_SYS_MEMTEST_END (V2M_BASE + 0x80000000)
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
+
+/* SMSC9115 Ethernet from SMSC9118 family */
+#define CONFIG_SMC9111 1
+#define CONFIG_SMC9111_BASE (0x1a000000)
+
+/* PL011 Serial Configuration */
+#define CONFIG_PL011_SERIAL
+#define CONFIG_PL011_CLOCK 24000000
+#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \
+ (void *)CONFIG_SYS_SERIAL1}
+#define CONFIG_CONS_INDEX 0
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_SERIAL0 V2M_UART0
+#define CONFIG_SYS_SERIAL1 V2M_UART1
+
+/* Command line configuration */
+#define CONFIG_MENU
+/*#define CONFIG_MENU_SHOW*/
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PXE
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_SOURCE
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+
+/* BOOTP options */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_PXE
+#define CONFIG_BOOTP_PXE_CLIENTARCH 0x100
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x10000000)
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM_1 (V2M_BASE) /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x80000000 /* 2048 MB */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "kernel_addr=0x200000\0" \
+ "initrd_addr=0xa00000\0" \
+ "initrd_size=0x2000000\0" \
+ "fdt_addr=0x100000\0" \
+ "fdt_high=0xa0000000\0"
+
+#define CONFIG_BOOTARGS "console=ttyAMA0 root=/dev/ram0"
+#define CONFIG_BOOTCOMMAND "bootm $kernel_addr " \
+ "$initrd_addr:$initrd_size $fdt_addr"
+#define CONFIG_BOOTDELAY -1
+
+/* Do not preserve environment */
+#define CONFIG_ENV_IS_NOWHERE 1
+#define CONFIG_ENV_SIZE 0x1000
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PROMPT "VExpress64# "
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_SYS_MAXARGS 64 /* max command args */
+
+#endif /* __VEXPRESS_AEMV8A_H */
diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h
index 734d13f..7ecbafe 100644
--- a/include/configs/vme8349.h
+++ b/include/configs/vme8349.h
@@ -539,7 +539,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h
index c3ac612..c6d4763 100644
--- a/include/configs/vpac270.h
+++ b/include/configs/vpac270.h
@@ -124,7 +124,6 @@
*/
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
@@ -287,7 +286,7 @@
/*
* Memory settings
*/
-#define CONFIG_SYS_MSC0_VAL 0x3ffc95fa
+#define CONFIG_SYS_MSC0_VAL 0x3ffc95f9
#define CONFIG_SYS_MSC1_VAL 0x02ccf974
#define CONFIG_SYS_MSC2_VAL 0x00000000
#ifdef CONFIG_RAM_256M
diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h
index 431ed96..2999d1b 100644
--- a/include/configs/xaeniax.h
+++ b/include/configs/xaeniax.h
@@ -84,7 +84,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
#endif
/*
diff --git a/include/configs/zeus.h b/include/configs/zeus.h
index 9d58738..d8aeb37 100644
--- a/include/configs/zeus.h
+++ b/include/configs/zeus.h
@@ -283,7 +283,6 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h
index 904f3b0..e38fa89 100644
--- a/include/configs/zipitz2.h
+++ b/include/configs/zipitz2.h
@@ -117,7 +117,6 @@
*/
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
new file mode 100644
index 0000000..e7a8e9f
--- /dev/null
+++ b/include/configs/zynq-common.h
@@ -0,0 +1,238 @@
+/*
+ * (C) Copyright 2012 Michal Simek <monstr@monstr.eu>
+ * (C) Copyright 2013 Xilinx, Inc.
+ *
+ * Common configuration options for all Zynq boards.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQ_COMMON_H
+#define __CONFIG_ZYNQ_COMMON_H
+
+/* High Level configuration Options */
+#define CONFIG_ARMV7
+#define CONFIG_ZYNQ
+
+/* CPU clock */
+#ifndef CONFIG_CPU_FREQ_HZ
+# define CONFIG_CPU_FREQ_HZ 800000000
+#endif
+
+/* Cache options */
+#define CONFIG_CMD_CACHE
+#define CONFIG_SYS_CACHELINE_SIZE 32
+
+#define CONFIG_SYS_L2CACHE_OFF
+#ifndef CONFIG_SYS_L2CACHE_OFF
+# define CONFIG_SYS_L2_PL310
+# define CONFIG_SYS_PL310_BASE 0xf8f02000
+#endif
+
+/* Serial drivers */
+#define CONFIG_BAUDRATE 115200
+/* The following table includes the supported baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+
+/* Zynq Serial driver */
+#ifdef CONFIG_ZYNQ_SERIAL_UART0
+# define CONFIG_ZYNQ_SERIAL_BASEADDR0 0xE0000000
+# define CONFIG_ZYNQ_SERIAL_BAUDRATE0 CONFIG_BAUDRATE
+# define CONFIG_ZYNQ_SERIAL_CLOCK0 50000000
+#endif
+
+#ifdef CONFIG_ZYNQ_SERIAL_UART1
+# define CONFIG_ZYNQ_SERIAL_BASEADDR1 0xE0001000
+# define CONFIG_ZYNQ_SERIAL_BAUDRATE1 CONFIG_BAUDRATE
+# define CONFIG_ZYNQ_SERIAL_CLOCK1 50000000
+#endif
+
+#if defined(CONFIG_ZYNQ_SERIAL_UART0) || defined(CONFIG_ZYNQ_SERIAL_UART1)
+# define CONFIG_ZYNQ_SERIAL
+#endif
+
+/* DCC driver */
+#if defined(CONFIG_ZYNQ_DCC)
+# define CONFIG_ARM_DCC
+# define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */
+#endif
+
+/* Ethernet driver */
+#if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1)
+# define CONFIG_NET_MULTI
+# define CONFIG_ZYNQ_GEM
+# define CONFIG_MII
+# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+# define CONFIG_PHYLIB
+# define CONFIG_PHY_MARVELL
+#endif
+
+/* SPI */
+#ifdef CONFIG_ZYNQ_SPI
+# define CONFIG_SPI_FLASH
+# define CONFIG_SPI_FLASH_SST
+# define CONFIG_CMD_SF
+#endif
+
+/* NOR */
+#ifndef CONFIG_SYS_NO_FLASH
+# define CONFIG_SYS_FLASH_BASE 0xE2000000
+# define CONFIG_SYS_FLASH_SIZE (16 * 1024 * 1024)
+# define CONFIG_SYS_MAX_FLASH_BANKS 1
+# define CONFIG_SYS_MAX_FLASH_SECT 512
+# define CONFIG_SYS_FLASH_ERASE_TOUT 1000
+# define CONFIG_SYS_FLASH_WRITE_TOUT 5000
+# define CONFIG_FLASH_SHOW_PROGRESS 10
+# define CONFIG_SYS_FLASH_CFI
+# undef CONFIG_SYS_FLASH_EMPTY_INFO
+# define CONFIG_FLASH_CFI_DRIVER
+# undef CONFIG_SYS_FLASH_PROTECTION
+# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#endif
+
+/* MMC */
+#if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
+# define CONFIG_MMC
+# define CONFIG_GENERIC_MMC
+# define CONFIG_SDHCI
+# define CONFIG_ZYNQ_SDHCI
+# define CONFIG_CMD_MMC
+# define CONFIG_CMD_FAT
+# define CONFIG_SUPPORT_VFAT
+# define CONFIG_CMD_EXT2
+# define CONFIG_DOS_PARTITION
+#endif
+
+/* I2C */
+#if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1)
+# define CONFIG_CMD_I2C
+# define CONFIG_SYS_I2C
+# define CONFIG_SYS_I2C_ZYNQ
+# define CONFIG_SYS_I2C_ZYNQ_SPEED 100000
+# define CONFIG_SYS_I2C_ZYNQ_SLAVE 1
+#endif
+
+/* EEPROM */
+#ifdef CONFIG_ZYNQ_EEPROM
+# define CONFIG_CMD_EEPROM
+# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+# define CONFIG_SYS_I2C_EEPROM_ADDR 0x54
+# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
+# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
+# define CONFIG_SYS_EEPROM_SIZE 1024 /* Bytes */
+#endif
+
+#define CONFIG_BOOTP_SERVERIP
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_MAY_FAIL
+
+/* Total Size of Environment Sector */
+#define CONFIG_ENV_SIZE (128 << 10)
+
+/* Allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* Environment */
+#ifndef CONFIG_ENV_IS_NOWHERE
+# ifndef CONFIG_SYS_NO_FLASH
+# define CONFIG_ENV_IS_IN_FLASH
+# elif defined(CONFIG_SYS_NO_FLASH)
+# define CONFIG_ENV_IS_NOWHERE
+# endif
+
+# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
+# define CONFIG_ENV_OFFSET 0xE0000
+# define CONFIG_CMD_SAVEENV
+#endif
+
+/* Default environment */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "fit_image=fit.itb\0" \
+ "load_addr=0x2000000\0" \
+ "fit_size=0x800000\0" \
+ "flash_off=0x100000\0" \
+ "nor_flash_off=0xE2100000\0" \
+ "fdt_high=0x20000000\0" \
+ "initrd_high=0x20000000\0" \
+ "norboot=echo Copying FIT from NOR flash to RAM... && " \
+ "cp.b ${nor_flash_off} ${load_addr} ${fit_size} && " \
+ "bootm ${load_addr}\0" \
+ "sdboot=echo Copying FIT from SD to RAM... && " \
+ "fatload mmc 0 ${load_addr} ${fit_image} && " \
+ "bootm ${load_addr}\0" \
+ "jtagboot=echo TFTPing FIT to RAM... && " \
+ "tftp ${load_addr} ${fit_image} && " \
+ "bootm ${load_addr}\0"
+#define CONFIG_BOOTCOMMAND "run $modeboot"
+#define CONFIG_BOOTDELAY 3 /* -1 to Disable autoboot */
+#define CONFIG_SYS_LOAD_ADDR 0 /* default? */
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_PROMPT "zynq-uboot> "
+#define CONFIG_SYS_HUSH_PARSER
+
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_MAXARGS 15 /* max number of command args */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/* Physical Memory map */
+#define CONFIG_SYS_TEXT_BASE 0x4000000
+
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_BASE 0
+
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000)
+
+#define CONFIG_SYS_MALLOC_LEN 0x400000
+#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+
+/* Enable the PL to be downloaded */
+#define CONFIG_FPGA
+#define CONFIG_FPGA_XILINX
+#define CONFIG_FPGA_ZYNQPL
+#define CONFIG_CMD_FPGA
+
+/* Open Firmware flat tree */
+#define CONFIG_OF_LIBFDT
+
+/* FIT support */
+#define CONFIG_FIT
+#define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
+
+/* FDT support */
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+#define CONFIG_DISPLAY_BOARDINFO_LATE
+
+/* RSA support */
+#define CONFIG_FIT_SIGNATURE
+#define CONFIG_RSA
+
+/* Boot FreeBSD/vxWorks from an ELF image */
+#if defined(CONFIG_ZYNQ_BOOT_FREEBSD)
+# define CONFIG_API
+# define CONFIG_CMD_ELF
+# define CONFIG_SYS_MMC_MAX_DEVICE 1
+#endif
+
+/* Commands */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+
+#endif /* __CONFIG_ZYNQ_COMMON_H */
diff --git a/include/configs/zynq.h b/include/configs/zynq.h
deleted file mode 100644
index 82ec826..0000000
--- a/include/configs/zynq.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * (C) Copyright 2012 Michal Simek <monstr@monstr.eu>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_ZYNQ_H
-#define __CONFIG_ZYNQ_H
-
-#define CONFIG_ARMV7 /* This is an ARM V7 CPU core */
-#define CONFIG_ZYNQ
-
-/* CPU clock */
-#define CONFIG_CPU_FREQ_HZ 800000000
-
-/* Ram */
-#define CONFIG_NR_DRAM_BANKS 1
-#define CONFIG_SYS_TEXT_BASE 0
-#define CONFIG_SYS_SDRAM_BASE 0
-#define CONFIG_SYS_SDRAM_SIZE 0x40000000
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000)
-
-/* The following table includes the supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
-
-#define CONFIG_BAUDRATE 115200
-
-/* XPSS Serial driver */
-#define CONFIG_ZYNQ_SERIAL
-#define CONFIG_ZYNQ_SERIAL_BASEADDR0 0xE0001000
-#define CONFIG_ZYNQ_SERIAL_BAUDRATE0 CONFIG_BAUDRATE
-#define CONFIG_ZYNQ_SERIAL_CLOCK0 50000000
-
-/* Ethernet driver */
-#define CONFIG_NET_MULTI
-#define CONFIG_ZYNQ_GEM
-#define CONFIG_ZYNQ_GEM0
-#define CONFIG_ZYNQ_GEM_PHY_ADDR0 7
-
-#define CONFIG_ZYNQ_SDHCI
-#define CONFIG_ZYNQ_SDHCI0
-
-/* MMC */
-#if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
-# define CONFIG_MMC
-# define CONFIG_GENERIC_MMC
-# define CONFIG_SDHCI
-# define CONFIG_ZYNQ_SDHCI
-# define CONFIG_CMD_MMC
-# define CONFIG_CMD_FAT
-# define CONFIG_SUPPORT_VFAT
-# define CONFIG_CMD_EXT2
-# define CONFIG_DOS_PARTITION
-#endif
-
-#define CONFIG_ZYNQ_I2C0
-
-/* I2C */
-#if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1)
-# define CONFIG_CMD_I2C
-# define CONFIG_SYS_I2C
-# define CONFIG_SYS_I2C_ZYNQ
-# define CONFIG_SYS_I2C_ZYNQ_SPEED 100000
-# define CONFIG_SYS_I2C_ZYNQ_SLAVE 1
-#endif
-
-#if defined(CONFIG_ZYNQ_DCC)
-# define CONFIG_ARM_DCC
-# define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */
-#endif
-
-#define CONFIG_ZYNQ_SPI
-
-/* SPI */
-#ifdef CONFIG_ZYNQ_SPI
-# define CONFIG_SPI_FLASH
-# define CONFIG_SPI_FLASH_SST
-# define CONFIG_CMD_SF
-#endif
-
-/* Enable the PL to be downloaded */
-#define CONFIG_FPGA
-#define CONFIG_FPGA_XILINX
-#define CONFIG_FPGA_ZYNQPL
-#define CONFIG_CMD_FPGA
-
-#define CONFIG_BOOTP_SERVERIP
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_MAY_FAIL
-
-/* MII and Phylib */
-#define CONFIG_MII
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MARVELL
-
-/* Environment */
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_ENV_SIZE 0x10000
-
-#define CONFIG_SYS_NO_FLASH
-
-#define CONFIG_SYS_MALLOC_LEN 0x400000
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_PROMPT "U-Boot> "
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-
-#define CONFIG_SYS_LOAD_ADDR 0
-#define CONFIG_SYS_MAXARGS 15 /* max number of command args */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-
-/* OF */
-#define CONFIG_FIT
-#define CONFIG_OF_LIBFDT
-
-/* Commands */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-
-#endif /* __CONFIG_ZYNQ_H */
diff --git a/include/configs/zynq_microzed.h b/include/configs/zynq_microzed.h
new file mode 100644
index 0000000..b0328a2
--- /dev/null
+++ b/include/configs/zynq_microzed.h
@@ -0,0 +1,26 @@
+/*
+ * (C) Copyright 2013 Xilinx, Inc.
+ *
+ * Configuration for Micro Zynq Evaluation and Development Board - MicroZedBoard
+ * See zynq-common.h for Zynq common configs
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQ_MICROZED_H
+#define __CONFIG_ZYNQ_MICROZED_H
+
+#define CONFIG_SYS_SDRAM_SIZE (1024 * 1024 * 1024)
+
+#define CONFIG_ZYNQ_SERIAL_UART1
+#define CONFIG_ZYNQ_GEM0
+#define CONFIG_ZYNQ_GEM_PHY_ADDR0 0
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ZYNQ_SDHCI0
+#define CONFIG_DEFAULT_DEVICE_TREE zynq-microzed
+
+#include <configs/zynq-common.h>
+
+#endif /* __CONFIG_ZYNQ_MICROZED_H */
diff --git a/include/configs/zynq_zc70x.h b/include/configs/zynq_zc70x.h
new file mode 100644
index 0000000..673660e
--- /dev/null
+++ b/include/configs/zynq_zc70x.h
@@ -0,0 +1,29 @@
+/*
+ * (C) Copyright 2013 Xilinx, Inc.
+ *
+ * Configuration settings for the Xilinx Zynq ZC702 and ZC706 boards
+ * See zynq_common.h for Zynq common configs
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQ_ZC70X_H
+#define __CONFIG_ZYNQ_ZC70X_H
+
+#define CONFIG_SYS_SDRAM_SIZE (1024 * 1024 * 1024)
+
+#define CONFIG_ZYNQ_SERIAL_UART1
+#define CONFIG_ZYNQ_GEM0
+#define CONFIG_ZYNQ_GEM_PHY_ADDR0 7
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ZYNQ_SDHCI0
+#define CONFIG_ZYNQ_I2C0
+#define CONFIG_ZYNQ_EEPROM
+#define CONFIG_ZYNQ_BOOT_FREEBSD
+#define CONFIG_DEFAULT_DEVICE_TREE zynq-zc702
+
+#include <configs/zynq-common.h>
+
+#endif /* __CONFIG_ZYNQ_ZC70X_H */
diff --git a/include/configs/zynq_zc770.h b/include/configs/zynq_zc770.h
new file mode 100644
index 0000000..8aa96e7
--- /dev/null
+++ b/include/configs/zynq_zc770.h
@@ -0,0 +1,42 @@
+/*
+ * (C) Copyright 2013 Xilinx, Inc.
+ *
+ * Configuration settings for the Xilinx Zynq ZC770 board.
+ * See zynq-common.h for Zynq common configs
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQ_ZC770_H
+#define __CONFIG_ZYNQ_ZC770_H
+
+#define CONFIG_SYS_SDRAM_SIZE (1024 * 1024 * 1024)
+
+#define CONFIG_SYS_NO_FLASH
+
+#if defined(CONFIG_ZC770_XM010)
+# define CONFIG_ZYNQ_SERIAL_UART1
+# define CONFIG_ZYNQ_GEM0
+# define CONFIG_ZYNQ_GEM_PHY_ADDR0 7
+# define CONFIG_ZYNQ_SDHCI0
+# define CONFIG_ZYNQ_SPI
+# define CONFIG_DEFAULT_DEVICE_TREE zynq-zc770-xm010
+
+#elif defined(CONFIG_ZC770_XM012)
+# define CONFIG_ZYNQ_SERIAL_UART1
+# undef CONFIG_SYS_NO_FLASH
+# define CONFIG_DEFAULT_DEVICE_TREE zynq-zc770-xm012
+
+#elif defined(CONFIG_ZC770_XM013)
+# define CONFIG_ZYNQ_SERIAL_UART0
+# define CONFIG_ZYNQ_GEM1
+# define CONFIG_ZYNQ_GEM_PHY_ADDR1 7
+# define CONFIG_DEFAULT_DEVICE_TREE zynq-zc770-xm013
+
+#else
+# define CONFIG_ZYNQ_SERIAL_UART0
+#endif
+
+#include <configs/zynq-common.h>
+
+#endif /* __CONFIG_ZYNQ_ZC770_H */
diff --git a/include/configs/zynq_zed.h b/include/configs/zynq_zed.h
new file mode 100644
index 0000000..412dede
--- /dev/null
+++ b/include/configs/zynq_zed.h
@@ -0,0 +1,27 @@
+/*
+ * (C) Copyright 2013 Xilinx, Inc.
+ *
+ * Configuration for Zynq Evaluation and Development Board - ZedBoard
+ * See zynq_common.h for Zynq common configs
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQ_ZED_H
+#define __CONFIG_ZYNQ_ZED_H
+
+#define CONFIG_SYS_SDRAM_SIZE (512 * 1024 * 1024)
+
+#define CONFIG_ZYNQ_SERIAL_UART1
+#define CONFIG_ZYNQ_GEM0
+#define CONFIG_ZYNQ_GEM_PHY_ADDR0 0
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ZYNQ_SDHCI0
+#define CONFIG_ZYNQ_BOOT_FREEBSD
+#define CONFIG_DEFAULT_DEVICE_TREE zynq-zed
+
+#include <configs/zynq-common.h>
+
+#endif /* __CONFIG_ZYNQ_ZED_H */
diff --git a/include/dfu.h b/include/dfu.h
index cc14044..f973426 100644
--- a/include/dfu.h
+++ b/include/dfu.h
@@ -77,6 +77,9 @@
#ifndef CONFIG_SYS_DFU_MAX_FILE_SIZE
#define CONFIG_SYS_DFU_MAX_FILE_SIZE CONFIG_SYS_DFU_DATA_BUF_SIZE
#endif
+#ifndef DFU_DEFAULT_POLL_TIMEOUT
+#define DFU_DEFAULT_POLL_TIMEOUT 0
+#endif
struct dfu_entity {
char name[DFU_NAME_SIZE];
@@ -131,6 +134,7 @@
int dfu_init_env_entities(char *interface, int dev);
unsigned char *dfu_get_buf(void);
unsigned char *dfu_free_buf(void);
+unsigned long dfu_get_buf_size(void);
int dfu_read(struct dfu_entity *de, void *buf, int size, int blk_seq_num);
int dfu_write(struct dfu_entity *de, void *buf, int size, int blk_seq_num);
diff --git a/include/image.h b/include/image.h
index ee6eb8d..7de2bb2 100644
--- a/include/image.h
+++ b/include/image.h
@@ -156,6 +156,7 @@
#define IH_ARCH_SANDBOX 19 /* Sandbox architecture (test only) */
#define IH_ARCH_NDS32 20 /* ANDES Technology - NDS32 */
#define IH_ARCH_OPENRISC 21 /* OpenRISC 1000 */
+#define IH_ARCH_ARM64 22 /* ARM64 */
/*
* Image Types
diff --git a/include/linux/crc8.h b/include/linux/crc8.h
new file mode 100644
index 0000000..b5fd2ac
--- /dev/null
+++ b/include/linux/crc8.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2013 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+
+#ifndef __linux_crc8_h
+#define __linux_crc8_h
+
+/**
+ * crc8() - Calculate and return CRC-8 of the data
+ *
+ * This uses an x^8 + x^2 + x + 1 polynomial. A table-based algorithm would
+ * be faster, but for only a few bytes it isn't worth the code size
+ *
+ * @vptr: Buffer to checksum
+ * @len: Length of buffer in bytes
+ * @return CRC8 checksum
+ */
+unsigned int crc8(const unsigned char *vptr, int len);
+
+#endif
diff --git a/include/linux/linkage.h b/include/linux/linkage.h
index 39c712e..7435fcd 100644
--- a/include/linux/linkage.h
+++ b/include/linux/linkage.h
@@ -48,6 +48,10 @@
.globl SYMBOL_NAME(name); \
LENTRY(name)
+#define WEAK(name) \
+ .weak SYMBOL_NAME(name); \
+ LENTRY(name)
+
#ifndef END
#define END(name) \
.size name, .-name
diff --git a/include/mmc.h b/include/mmc.h
index cb558da..e1060b9 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -262,6 +262,8 @@
uint card_caps;
uint host_caps;
uint ocr;
+ uint dsr;
+ uint dsr_imp;
uint scr[2];
uint csd[4];
uint cid[4];
@@ -304,7 +306,7 @@
int mmc_switch_part(int dev_num, unsigned int part_num);
int mmc_getcd(struct mmc *mmc);
int mmc_getwp(struct mmc *mmc);
-void spl_mmc_load(void) __noreturn;
+int mmc_set_dsr(struct mmc *mmc, u16 val);
/* Function to change the size of boot partition and rpmb partitions */
int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize,
unsigned long rpmbsize);
diff --git a/include/os.h b/include/os.h
index 950433d..b65fba4 100644
--- a/include/os.h
+++ b/include/os.h
@@ -107,6 +107,35 @@
void *os_malloc(size_t length);
/**
+ * Free memory previous allocated with os_malloc()/os_realloc()
+ *
+ * This returns the memory to the OS.
+ *
+ * \param ptr Pointer to memory block to free
+ */
+void *os_free(void *ptr);
+
+/**
+ * Reallocate previously-allocated memory to increase/decrease space
+ *
+ * This works in a similar way to the C library realloc() function. If
+ * length is 0, then ptr is freed. Otherwise the space used by ptr is
+ * expanded or reduced depending on whether length is larger or smaller
+ * than before.
+ *
+ * If ptr is NULL, then this is similar to calling os_malloc().
+ *
+ * This function may need to move the memory block to make room for any
+ * extra space, in which case the new pointer is returned.
+ *
+ * \param ptr Pointer to memory block to reallocate
+ * \param length New length for memory block
+ * \return pointer to new memory block, or NULL on failure or if length
+ * is 0.
+ */
+void *os_realloc(void *ptr, size_t length);
+
+/**
* Access to the usleep function of the os
*
* \param usec Time to sleep in micro seconds
@@ -180,4 +209,40 @@
*/
ssize_t os_get_filesize(const char *fname);
+/**
+ * Write a character to the controlling OS terminal
+ *
+ * This bypasses the U-Boot console support and writes directly to the OS
+ * stdout file descriptor.
+ *
+ * @param ch Character to write
+ */
+void os_putc(int ch);
+
+/**
+ * Write a string to the controlling OS terminal
+ *
+ * This bypasses the U-Boot console support and writes directly to the OS
+ * stdout file descriptor.
+ *
+ * @param str String to write (note that \n is not appended)
+ */
+void os_puts(const char *str);
+
+/**
+ * Write the sandbox RAM buffer to a existing file
+ *
+ * @param fname Filename to write memory to (simple binary format)
+ * @return 0 if OK, -ve on error
+ */
+int os_write_ram_buf(const char *fname);
+
+/**
+ * Read the sandbox RAM buffer from an existing file
+ *
+ * @param fname Filename containing memory (simple binary format)
+ * @return 0 if OK, -ve on error
+ */
+int os_read_ram_buf(const char *fname);
+
#endif
diff --git a/include/part.h b/include/part.h
index ce840bd..4beb6db 100644
--- a/include/part.h
+++ b/include/part.h
@@ -58,6 +58,8 @@
#define IF_TYPE_MMC 6
#define IF_TYPE_SD 7
#define IF_TYPE_SATA 8
+#define IF_TYPE_HOST 9
+#define IF_TYPE_MAX 10 /* Max number of IF_TYPE_* supported */
/* Part types */
#define PART_TYPE_UNKNOWN 0x00
@@ -102,6 +104,8 @@
block_dev_desc_t* mmc_get_dev(int dev);
block_dev_desc_t* systemace_get_dev(int dev);
block_dev_desc_t* mg_disk_get_dev(int dev);
+block_dev_desc_t *host_get_dev(int dev);
+int host_get_dev_err(int dev, block_dev_desc_t **blk_devp);
/* disk/part.c */
int get_partition_info (block_dev_desc_t * dev_desc, int part, disk_partition_t *info);
@@ -123,6 +127,7 @@
static inline block_dev_desc_t* mmc_get_dev(int dev) { return NULL; }
static inline block_dev_desc_t* systemace_get_dev(int dev) { return NULL; }
static inline block_dev_desc_t* mg_disk_get_dev(int dev) { return NULL; }
+static inline block_dev_desc_t *host_get_dev(int dev) { return NULL; }
static inline int get_partition_info (block_dev_desc_t * dev_desc, int part,
disk_partition_t *info) { return -1; }
diff --git a/include/sandboxblockdev.h b/include/sandboxblockdev.h
new file mode 100644
index 0000000..627787a
--- /dev/null
+++ b/include/sandboxblockdev.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2013, Henrik Nordstrom <henrik@henriknordstrom.net>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __SANDBOX_BLOCK_DEV__
+#define __SANDBOX_BLOCK_DEV__
+
+struct host_block_dev {
+ block_dev_desc_t blk_dev;
+ char *filename;
+ int fd;
+};
+
+int host_dev_bind(int dev, char *filename);
+
+#endif
diff --git a/include/sh_tmu.h b/include/sh_tmu.h
index f5b42fa..61afc71 100644
--- a/include/sh_tmu.h
+++ b/include/sh_tmu.h
@@ -47,7 +47,7 @@
};
#endif /* CONFIG_SH3 */
-#if defined(CONFIG_SH4) || defined(CONFIG_SH4A) || defined(CONFIG_RMOBILE)
+#if defined(CONFIG_SH4) || defined(CONFIG_RMOBILE)
struct tmu_regs {
u32 reserved;
u8 tstr;
diff --git a/include/vxworks.h b/include/vxworks.h
index c5d1577..122043c 100644
--- a/include/vxworks.h
+++ b/include/vxworks.h
@@ -9,6 +9,9 @@
#define _VXWORKS_H_
int do_bootvx(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
+void boot_prep_vxworks(bootm_headers_t *images);
+void boot_jump_vxworks(bootm_headers_t *images);
+void do_bootvx_fdt(bootm_headers_t *images);
/*
* Use bootaddr to find the location in memory that VxWorks
diff --git a/lib/Makefile b/lib/Makefile
index e787f77..760340f 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -21,6 +21,7 @@
obj-$(CONFIG_BZIP2) += bzlib_huffman.o
obj-$(CONFIG_USB_TTY) += circbuf.o
obj-y += crc7.o
+obj-y += crc8.o
obj-y += crc16.o
obj-$(CONFIG_OF_CONTROL) += fdtdec.o
obj-$(CONFIG_TEST_FDTDEC) += fdtdec_test.o
diff --git a/lib/crc8.c b/lib/crc8.c
new file mode 100644
index 0000000..8b68a29
--- /dev/null
+++ b/lib/crc8.c
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2013 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include "linux/crc8.h"
+
+unsigned int crc8(const unsigned char *vptr, int len)
+{
+ const unsigned char *data = vptr;
+ unsigned int crc = 0;
+ int i, j;
+
+ for (j = len; j; j--, data++) {
+ crc ^= (*data << 8);
+ for (i = 8; i; i--) {
+ if (crc & 0x8000)
+ crc ^= (0x1070 << 3);
+ crc <<= 1;
+ }
+ }
+
+ return (crc >> 8) & 0xff;
+}
diff --git a/lib/time.c b/lib/time.c
index 09bb05a..8085aa4 100644
--- a/lib/time.c
+++ b/lib/time.c
@@ -71,8 +71,8 @@
}
static unsigned long long usec_to_tick(unsigned long usec)
{
- uint64_t tick = usec * get_tbclk();
- usec *= get_tbclk();
+ uint64_t tick = usec;
+ tick *= get_tbclk();
do_div(tick, 1000000);
return tick;
}
diff --git a/mkconfig b/mkconfig
index 40db991..b96c81f 100755
--- a/mkconfig
+++ b/mkconfig
@@ -85,6 +85,13 @@
exit 1
fi
+#
+# Test above needed aarch64, now we need arm
+#
+if [ "${arch}" = "aarch64" ]; then
+ arch="arm"
+fi
+
if [ "$options" ] ; then
echo "Configuring for ${BOARD_NAME} - Board: ${CONFIG_NAME}, Options: ${options}"
else
diff --git a/post/Makefile b/post/Makefile
index 1439244..2fa6f8a 100644
--- a/post/Makefile
+++ b/post/Makefile
@@ -5,16 +5,14 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_HAS_POST) += post.o
+obj-y += post.o
obj-$(CONFIG_POST_STD_LIST) += tests.o
-obj-$(CONFIG_HAS_POST) += drivers/
-ifeq ($(ARCH),powerpc)
-obj-$(CONFIG_HAS_POST) += lib_powerpc/
-endif
-ifneq ($(filter mpc83xx mpc8xx ppc4xx,$(CPU)),)
-obj-$(CONFIG_HAS_POST) += cpu/$(CPU)/
-endif
+obj-y += drivers/
+obj-$(CONFIG_PPC) += lib_powerpc/
+obj-$(CONFIG_MPC83xx) += cpu/mpc83xx/
+obj-$(CONFIG_8xx) += cpu/mpc8xx/
+obj-$(CONFIG_4xx) += cpu/ppc4xx/
ifneq ($(filter lwmon lwmon5 netta pdm360ng,$(BOARD)),)
-obj-$(CONFIG_HAS_POST) += board/$(BOARD)/
+obj-y += board/$(BOARD)/
endif
diff --git a/post/board/lwmon/Makefile b/post/board/lwmon/Makefile
index b23debc..7f6d5a0 100644
--- a/post/board/lwmon/Makefile
+++ b/post/board/lwmon/Makefile
@@ -5,4 +5,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_HAS_POST) += sysmon.o
+obj-y += sysmon.o
diff --git a/post/board/lwmon5/Makefile b/post/board/lwmon5/Makefile
index a50ce67..76262c7 100644
--- a/post/board/lwmon5/Makefile
+++ b/post/board/lwmon5/Makefile
@@ -5,4 +5,4 @@
#
# SPDX-License-Identifier: GPL-2.0+
-obj-$(CONFIG_HAS_POST) += sysmon.o watchdog.o dspic.o fpga.o dsp.o gdc.o
+obj-y += sysmon.o watchdog.o dspic.o fpga.o dsp.o gdc.o
diff --git a/post/board/netta/Makefile b/post/board/netta/Makefile
index 5c37f49..8fc1945 100644
--- a/post/board/netta/Makefile
+++ b/post/board/netta/Makefile
@@ -5,4 +5,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_HAS_POST) += codec.o dsp.o
+obj-y += codec.o dsp.o
diff --git a/post/board/pdm360ng/Makefile b/post/board/pdm360ng/Makefile
index b43b77b..9aa96a1 100644
--- a/post/board/pdm360ng/Makefile
+++ b/post/board/pdm360ng/Makefile
@@ -5,4 +5,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_HAS_POST) += coproc_com.o
+obj-y += coproc_com.o
diff --git a/post/cpu/mpc83xx/Makefile b/post/cpu/mpc83xx/Makefile
index 4b3c50e..d57b667 100644
--- a/post/cpu/mpc83xx/Makefile
+++ b/post/cpu/mpc83xx/Makefile
@@ -5,4 +5,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_HAS_POST) += ecc.o
+obj-y += ecc.o
diff --git a/post/cpu/ppc4xx/Makefile b/post/cpu/ppc4xx/Makefile
index ed3e8e8..e9ec286 100644
--- a/post/cpu/ppc4xx/Makefile
+++ b/post/cpu/ppc4xx/Makefile
@@ -5,12 +5,12 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_HAS_POST) += cache_4xx.o
-obj-$(CONFIG_HAS_POST) += cache.o
-obj-$(CONFIG_HAS_POST) += denali_ecc.o
-obj-$(CONFIG_HAS_POST) += ether.o
-obj-$(CONFIG_HAS_POST) += fpu.o
-obj-$(CONFIG_HAS_POST) += ocm.o
-obj-$(CONFIG_HAS_POST) += spr.o
-obj-$(CONFIG_HAS_POST) += uart.o
-obj-$(CONFIG_HAS_POST) += watchdog.o
+obj-y += cache_4xx.o
+obj-y += cache.o
+obj-y += denali_ecc.o
+obj-y += ether.o
+obj-y += fpu.o
+obj-y += ocm.o
+obj-y += spr.o
+obj-y += uart.o
+obj-y += watchdog.o
diff --git a/post/drivers/Makefile b/post/drivers/Makefile
index 328f880..1abfb1f 100644
--- a/post/drivers/Makefile
+++ b/post/drivers/Makefile
@@ -5,4 +5,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_HAS_POST) += flash.o i2c.o memory.o rtc.o
+obj-y += flash.o i2c.o memory.o rtc.o
diff --git a/post/lib_powerpc/Makefile b/post/lib_powerpc/Makefile
index d2b8a94..0cbb6b6 100644
--- a/post/lib_powerpc/Makefile
+++ b/post/lib_powerpc/Makefile
@@ -5,9 +5,9 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_HAS_POST) += asm.o
-obj-$(CONFIG_HAS_POST) += cpu.o cmp.o cmpi.o two.o twox.o three.o threex.o
-obj-$(CONFIG_HAS_POST) += threei.o andi.o srawi.o rlwnm.o rlwinm.o rlwimi.o
-obj-$(CONFIG_HAS_POST) += store.o load.o cr.o b.o multi.o string.o complex.o
+obj-y += asm.o
+obj-y += cpu.o cmp.o cmpi.o two.o twox.o three.o threex.o
+obj-y += threei.o andi.o srawi.o rlwnm.o rlwinm.o rlwimi.o
+obj-y += store.o load.o cr.o b.o multi.o string.o complex.o
-obj-$(CONFIG_HAS_POST) += fpu/
+obj-y += fpu/
diff --git a/post/lib_powerpc/fpu/Makefile b/post/lib_powerpc/fpu/Makefile
index ee01a31..ae56a82 100644
--- a/post/lib_powerpc/fpu/Makefile
+++ b/post/lib_powerpc/fpu/Makefile
@@ -5,15 +5,15 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_HAS_POST) += 20001122-1.o
-obj-$(CONFIG_HAS_POST) += 20010114-2.o
-obj-$(CONFIG_HAS_POST) += 20010226-1.o
-obj-$(CONFIG_HAS_POST) += 980619-1.o
-obj-$(CONFIG_HAS_POST) += acc1.o
-obj-$(CONFIG_HAS_POST) += compare-fp-1.o
-obj-$(CONFIG_HAS_POST) += fpu.o
-obj-$(CONFIG_HAS_POST) += mul-subnormal-single-1.o
-obj-$(CONFIG_HAS_POST) += darwin-ldouble.o
+obj-y += 20001122-1.o
+obj-y += 20010114-2.o
+obj-y += 20010226-1.o
+obj-y += 980619-1.o
+obj-y += acc1.o
+obj-y += compare-fp-1.o
+obj-y += fpu.o
+obj-y += mul-subnormal-single-1.o
+obj-y += darwin-ldouble.o
CFLAGS := $(shell echo $(CFLAGS) | sed s/-msoft-float//)
CFLAGS += -mhard-float -fkeep-inline-functions
diff --git a/tools/binutils-version.sh b/scripts/binutils-version.sh
old mode 100755
new mode 100644
similarity index 100%
rename from tools/binutils-version.sh
rename to scripts/binutils-version.sh
diff --git a/tools/checkpatch.pl b/scripts/checkpatch.pl
similarity index 100%
rename from tools/checkpatch.pl
rename to scripts/checkpatch.pl
diff --git a/tools/checkstack.pl b/scripts/checkstack.pl
similarity index 100%
rename from tools/checkstack.pl
rename to scripts/checkstack.pl
diff --git a/tools/cleanpatch b/scripts/cleanpatch
similarity index 100%
rename from tools/cleanpatch
rename to scripts/cleanpatch
diff --git a/tools/dtc-version.sh b/scripts/dtc-version.sh
old mode 100755
new mode 100644
similarity index 100%
rename from tools/dtc-version.sh
rename to scripts/dtc-version.sh
diff --git a/tools/gcc-version.sh b/scripts/gcc-version.sh
old mode 100755
new mode 100644
similarity index 100%
rename from tools/gcc-version.sh
rename to scripts/gcc-version.sh
diff --git a/tools/setlocalversion b/scripts/setlocalversion
similarity index 100%
rename from tools/setlocalversion
rename to scripts/setlocalversion
diff --git a/spl/.gitignore b/spl/.gitignore
deleted file mode 100644
index 7c88147..0000000
--- a/spl/.gitignore
+++ /dev/null
@@ -1,4 +0,0 @@
-u-boot-spl
-u-boot-spl.bin
-u-boot-spl.lds
-u-boot-spl.map
diff --git a/spl/Makefile b/spl/Makefile
index 0caa982..5e5472d 100644
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -37,22 +37,15 @@
HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(SRCTREE)/board/$(VENDOR)/common/Makefile),y,n)
ifdef CONFIG_SPL_START_S_PATH
-START_PATH := $(subst ",,$(CONFIG_SPL_START_S_PATH))
+START_PATH := $(CONFIG_SPL_START_S_PATH:"%"=%)
else
START_PATH := $(CPUDIR)
endif
-START := $(START_PATH)/start.o
-ifeq ($(CPU),x86)
-START += $(START_PATH)/start16.o
-START += $(START_PATH)/resetvec.o
-endif
-ifeq ($(CPU),ppc4xx)
-START += $(START_PATH)/resetvec.o
-endif
-ifeq ($(CPU),mpc85xx)
-START += $(START_PATH)/resetvec.o
-endif
+head-y := $(START_PATH)/start.o
+head-$(CONFIG_X86) += $(START_PATH)/start16.o $(START_PATH)/resetvec.o
+head-$(CONFIG_4xx) += $(START_PATH)/resetvec.o
+head-$(CONFIG_MPC85xx) += $(START_PATH)/resetvec.o
LIBS-y += arch/$(ARCH)/lib/
@@ -78,7 +71,7 @@
LIBS-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
LIBS-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/ \
drivers/power/pmic/
-LIBS-$(CONFIG_SPL_NAND_SUPPORT) += drivers/mtd/nand/
+LIBS-$(if $(CONFIG_CMD_NAND),$(CONFIG_SPL_NAND_SUPPORT)) += drivers/mtd/nand/
LIBS-$(CONFIG_SPL_ONENAND_SUPPORT) += drivers/mtd/onenand/
LIBS-$(CONFIG_SPL_DMA_SUPPORT) += drivers/dma/
LIBS-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/
@@ -90,17 +83,13 @@
LIBS-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/
LIBS-$(CONFIG_SPL_WATCHDOG_SUPPORT) += drivers/watchdog/
-ifneq (,$(CONFIG_MX23)$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35))
+ifneq (,$(CONFIG_MX23)$(CONFIG_MX35)$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35))
LIBS-y += arch/$(ARCH)/imx-common/
endif
LIBS-$(CONFIG_ARM) += arch/arm/cpu/
LIBS-$(CONFIG_PPC) += arch/powerpc/cpu/
-ifneq ($(CONFIG_MX23)$(CONFIG_MX35),)
-LIBS-y += arch/$(ARCH)/imx-common/
-endif
-
LIBS-y := $(patsubst %/, %/built-in.o, $(LIBS-y))
# Add GCC lib
@@ -109,7 +98,7 @@
PLATFORM_LIBS := $(filter-out %/libgcc.o, $(filter-out -lgcc, $(PLATFORM_LIBS))) $(PLATFORM_LIBGCC)
endif
-START := $(addprefix $(SPLTREE)/,$(START))
+START := $(addprefix $(SPLTREE)/,$(head-y))
LIBS := $(addprefix $(SPLTREE)/,$(sort $(LIBS-y)))
__START := $(subst $(obj),,$(START))
@@ -118,7 +107,7 @@
# Linker Script
ifdef CONFIG_SPL_LDSCRIPT
# need to strip off double quotes
-LDSCRIPT := $(addprefix $(SRCTREE)/,$(subst ",,$(CONFIG_SPL_LDSCRIPT)))
+LDSCRIPT := $(addprefix $(SRCTREE)/,$(CONFIG_SPL_LDSCRIPT:"%"=%))
endif
ifeq ($(wildcard $(LDSCRIPT)),)
@@ -176,7 +165,7 @@
endif
$(obj)$(SPL_BIN).bin: $(obj)$(SPL_BIN)
- $(OBJCOPY) $(OBJCFLAGS) -O binary $< $@
+ $(OBJCOPY) $(OBJCFLAGS) $(SPL_OBJCFLAGS) -O binary $< $@
GEN_UBOOT = \
cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) $(__START) \
diff --git a/test/image/test-imagetools.sh b/test/image/test-imagetools.sh
new file mode 100755
index 0000000..9e299e1
--- /dev/null
+++ b/test/image/test-imagetools.sh
@@ -0,0 +1,141 @@
+#!/bin/bash
+#
+# Written by Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>
+#
+# Sanity check for mkimage and dumpimage tools
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# To run this:
+#
+# make O=sandbox sandbox_config
+# make O=sandbox
+# ./test/image/test-imagetools.sh
+
+BASEDIR=sandbox
+SRCDIR=sandbox/boot
+IMAGE_NAME="v1.0-test"
+IMAGE=linux.img
+DATAFILE0=vmlinuz
+DATAFILE1=initrd.img
+DATAFILE2=System.map
+DATAFILES="${DATAFILE0} ${DATAFILE1} ${DATAFILE2}"
+TEST_OUT=test_output
+MKIMAGE=${BASEDIR}/tools/mkimage
+DUMPIMAGE=${BASEDIR}/tools/dumpimage
+MKIMAGE_LIST=mkimage.list
+DUMPIMAGE_LIST=dumpimage.list
+
+# Remove all the files we created
+cleanup()
+{
+ local file
+
+ for file in ${DATAFILES}; do
+ rm -f ${file} ${SRCDIR}/${file}
+ done
+ rm -f ${IMAGE} ${DUMPIMAGE_LIST} ${MKIMAGE_LIST} ${TEST_OUT}
+ rmdir ${SRCDIR}
+}
+
+# Check that two files are the same
+assert_equal()
+{
+ if ! diff $1 $2; then
+ echo "Failed."
+ cleanup
+ exit 1
+ fi
+}
+
+# Create some test files
+create_files()
+{
+ local file
+
+ mkdir -p ${SRCDIR}
+ for file in ${DATAFILES}; do
+ head -c $RANDOM /dev/urandom >${SRCDIR}/${file}
+ done
+}
+
+# Run a command, echoing it first
+do_cmd()
+{
+ local cmd="$@"
+
+ echo "# ${cmd}"
+ ${cmd} 2>&1
+}
+
+# Run a command, redirecting output
+# Args:
+# redirect_file
+# command...
+do_cmd_redir()
+{
+ local redir="$1"
+ shift
+ local cmd="$@"
+
+ echo "# ${cmd}"
+ ${cmd} >${redir}
+}
+
+# Write files into an image
+create_image()
+{
+ local files="${SRCDIR}/${DATAFILE0}:${SRCDIR}/${DATAFILE1}"
+ files+=":${SRCDIR}/${DATAFILE2}"
+
+ echo -e "\nBuilding image..."
+ do_cmd ${MKIMAGE} -A x86 -O linux -T multi -n \"${IMAGE_NAME}\" \
+ -d ${files} ${IMAGE}
+ echo "done."
+}
+
+# Extract files from an image
+extract_image()
+{
+ echo -e "\nExtracting image contents..."
+ do_cmd ${DUMPIMAGE} -i ${IMAGE} -p 0 ${DATAFILE0}
+ do_cmd ${DUMPIMAGE} -i ${IMAGE} -p 1 ${DATAFILE1}
+ do_cmd ${DUMPIMAGE} -i ${IMAGE} -p 2 ${DATAFILE2}
+ do_cmd ${DUMPIMAGE} -i ${IMAGE} -p 2 ${DATAFILE2} -o ${TEST_OUT}
+ echo "done."
+}
+
+# List the contents of a file
+list_image()
+{
+ echo -e "\nListing image contents..."
+ do_cmd_redir ${MKIMAGE_LIST} ${MKIMAGE} -l ${IMAGE}
+ do_cmd_redir ${DUMPIMAGE_LIST} ${DUMPIMAGE} -l ${IMAGE}
+ echo "done."
+}
+
+main()
+{
+ local file
+
+ create_files
+
+ # Compress and extract multifile images, compare the result
+ create_image
+ extract_image
+ for file in ${DATAFILES}; do
+ assert_equal ${file} ${SRCDIR}/${file}
+ done
+ assert_equal ${TEST_OUT} ${DATAFILE2}
+
+ # List contents and compares output fro tools
+ list_image
+ assert_equal ${DUMPIMAGE_LIST} ${MKIMAGE_LIST}
+
+ # Remove files created
+ cleanup
+
+ echo "Tests passed."
+}
+
+main
diff --git a/tools/.gitignore b/tools/.gitignore
index a7fee26..930fa2e 100644
--- a/tools/.gitignore
+++ b/tools/.gitignore
@@ -3,12 +3,12 @@
/gen_eth_addr
/img2srec
/kwboot
+/dumpimage
/mkenvimage
/mkimage
/mpc86x_clk
/mxsboot
/ncb
-/ncp
/proftool
/ubsha1
/xway-swap-bytes
diff --git a/tools/Makefile b/tools/Makefile
index d4bc84d..328cea3 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -50,6 +50,7 @@
BIN_FILES-$(CONFIG_CMD_NET) += gen_eth_addr$(SFX)
BIN_FILES-$(CONFIG_CMD_LOADS) += img2srec$(SFX)
BIN_FILES-$(CONFIG_XWAY_SWAP_BYTES) += xway-swap-bytes$(SFX)
+BIN_FILES-y += dumpimage$(SFX)
BIN_FILES-y += mkenvimage$(SFX)
BIN_FILES-y += mkimage$(SFX)
BIN_FILES-$(CONFIG_EXYNOS5250) += mk$(BOARD)spl$(SFX)
@@ -60,6 +61,7 @@
BIN_FILES-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1$(SFX)
BIN_FILES-$(CONFIG_KIRKWOOD) += kwboot$(SFX)
BIN_FILES-y += proftool(SFX)
+BIN_FILES-$(CONFIG_STATIC_RELA) += relocate-rela$(SFX)
# Source files which exist outside the tools directory
EXT_OBJ_FILES-$(CONFIG_BUILD_ENVCRC) += common/env_embedded.o
@@ -73,10 +75,12 @@
# Source files located in the tools directory
NOPED_OBJ_FILES-y += aisimage.o
NOPED_OBJ_FILES-y += default_image.o
+NOPED_OBJ_FILES-y += dumpimage.o
NOPED_OBJ_FILES-y += fit_image.o
NOPED_OBJ_FILES-y += image-host.o
NOPED_OBJ_FILES-y += imximage.o
NOPED_OBJ_FILES-y += kwbimage.o
+NOPED_OBJ_FILES-y += imagetool.o
NOPED_OBJ_FILES-y += mkenvimage.o
NOPED_OBJ_FILES-y += mkimage.o
NOPED_OBJ_FILES-y += mxsimage.o
@@ -85,6 +89,7 @@
NOPED_OBJ_FILES-y += pblimage.o
NOPED_OBJ_FILES-y += proftool.o
NOPED_OBJ_FILES-y += ublimage.o
+NOPED_OBJ_FILES-y += relocate-rela.o
OBJ_FILES-$(CONFIG_BUILD_ENVCRC) += envcrc.o
OBJ_FILES-$(CONFIG_CMD_LOADS) += img2srec.o
OBJ_FILES-$(CONFIG_CMD_NET) += gen_eth_addr.o
@@ -200,6 +205,30 @@
$(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^
$(HOSTSTRIP) $@
+$(obj)dumpimage$(SFX): $(obj)aisimage.o \
+ $(FIT_SIG_OBJS) \
+ $(obj)crc32.o \
+ $(obj)default_image.o \
+ $(obj)fit_image.o \
+ $(obj)image-fit.o \
+ $(obj)image.o \
+ $(obj)image-host.o \
+ $(obj)imagetool.o \
+ $(obj)imximage.o \
+ $(obj)kwbimage.o \
+ $(obj)dumpimage.o \
+ $(obj)md5.o \
+ $(obj)mxsimage.o \
+ $(obj)omapimage.o \
+ $(obj)os_support.o \
+ $(obj)pblimage.o \
+ $(obj)sha1.o \
+ $(obj)ublimage.o \
+ $(LIBFDT_OBJS) \
+ $(RSA_OBJS)
+ $(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^ $(HOSTLIBS)
+ $(HOSTSTRIP) $@
+
$(obj)mkenvimage$(SFX): $(obj)crc32.o $(obj)mkenvimage.o \
$(obj)os_support.o
$(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^
@@ -213,6 +242,7 @@
$(obj)image-fit.o \
$(obj)image-host.o \
$(obj)image.o \
+ $(obj)imagetool.o \
$(obj)imximage.o \
$(obj)kwbimage.o \
$(obj)md5.o \
@@ -251,6 +281,10 @@
$(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^
$(HOSTSTRIP) $@
+$(obj)relocate-rela$(SFX): $(obj)relocate-rela.o
+ $(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^
+ $(HOSTSTRIP) $@
+
# Some of the tool objects need to be accessed from outside the tools directory
$(obj)%.o: $(SRCTREE)/common/%.c
$(HOSTCC) -g $(HOSTCFLAGS_NOPED) -c -o $@ $<
diff --git a/tools/aisimage.c b/tools/aisimage.c
index 04fb649..8de370a 100644
--- a/tools/aisimage.c
+++ b/tools/aisimage.c
@@ -5,7 +5,7 @@
* SPDX-License-Identifier: GPL-2.0+
*/
-#include "mkimage.h"
+#include "imagetool.h"
#include "aisimage.h"
#include <image.h>
@@ -176,7 +176,7 @@
}
-static uint32_t *ais_alloc_buffer(struct mkimage_params *params)
+static uint32_t *ais_alloc_buffer(struct image_tool_params *params)
{
int dfd;
struct stat sbuf;
@@ -216,7 +216,7 @@
return ptr;
}
-static uint32_t *ais_copy_image(struct mkimage_params *params,
+static uint32_t *ais_copy_image(struct image_tool_params *params,
uint32_t *aisptr)
{
@@ -252,7 +252,7 @@
}
-static int aisimage_generate(struct mkimage_params *params,
+static int aisimage_generate(struct image_tool_params *params,
struct image_type_params *tparams)
{
FILE *fd = NULL;
@@ -370,7 +370,7 @@
}
static int aisimage_verify_header(unsigned char *ptr, int image_size,
- struct mkimage_params *params)
+ struct image_tool_params *params)
{
struct ais_header *ais_hdr = (struct ais_header *)ptr;
@@ -384,11 +384,11 @@
}
static void aisimage_set_header(void *ptr, struct stat *sbuf, int ifd,
- struct mkimage_params *params)
+ struct image_tool_params *params)
{
}
-int aisimage_check_params(struct mkimage_params *params)
+int aisimage_check_params(struct image_tool_params *params)
{
if (!params)
return CFG_INVALID;
@@ -427,5 +427,5 @@
void init_ais_image_type(void)
{
- mkimage_register(&aisimage_params);
+ register_image_type(&aisimage_params);
}
diff --git a/tools/default_image.c b/tools/default_image.c
index fd8b9f5..0a0792e 100644
--- a/tools/default_image.c
+++ b/tools/default_image.c
@@ -14,7 +14,7 @@
* SPDX-License-Identifier: GPL-2.0+
*/
-#include "mkimage.h"
+#include "imagetool.h"
#include <image.h>
#include <u-boot/crc.h>
@@ -29,7 +29,7 @@
return EXIT_FAILURE;
}
-static int image_check_params(struct mkimage_params *params)
+static int image_check_params(struct image_tool_params *params)
{
return ((params->dflag && (params->fflag || params->lflag)) ||
(params->fflag && (params->dflag || params->lflag)) ||
@@ -37,7 +37,7 @@
}
static int image_verify_header(unsigned char *ptr, int image_size,
- struct mkimage_params *params)
+ struct image_tool_params *params)
{
uint32_t len;
const unsigned char *data;
@@ -86,7 +86,7 @@
}
static void image_set_header(void *ptr, struct stat *sbuf, int ifd,
- struct mkimage_params *params)
+ struct image_tool_params *params)
{
uint32_t checksum;
@@ -117,6 +117,62 @@
image_set_hcrc(hdr, checksum);
}
+static int image_save_datafile(struct image_tool_params *params,
+ ulong file_data, ulong file_len)
+{
+ int dfd;
+ const char *datafile = params->outfile;
+
+ dfd = open(datafile, O_RDWR | O_CREAT | O_TRUNC | O_BINARY,
+ S_IRUSR | S_IWUSR);
+ if (dfd < 0) {
+ fprintf(stderr, "%s: Can't open \"%s\": %s\n",
+ params->cmdname, datafile, strerror(errno));
+ return -1;
+ }
+
+ if (write(dfd, (void *)file_data, file_len) != (ssize_t)file_len) {
+ fprintf(stderr, "%s: Write error on \"%s\": %s\n",
+ params->cmdname, datafile, strerror(errno));
+ close(dfd);
+ return -1;
+ }
+
+ close(dfd);
+
+ return 0;
+}
+
+static int image_extract_datafile(void *ptr, struct image_tool_params *params)
+{
+ const image_header_t *hdr = (const image_header_t *)ptr;
+ ulong file_data;
+ ulong file_len;
+
+ if (image_check_type(hdr, IH_TYPE_MULTI)) {
+ ulong idx = params->pflag;
+ ulong count;
+
+ /* get the number of data files present in the image */
+ count = image_multi_count(hdr);
+
+ /* retrieve the "data file" at the idx position */
+ image_multi_getimg(hdr, idx, &file_data, &file_len);
+
+ if ((file_len == 0) || (idx >= count)) {
+ fprintf(stderr, "%s: No such data file %ld in \"%s\"\n",
+ params->cmdname, idx, params->imagefile);
+ return -1;
+ }
+ } else {
+ file_data = image_get_data(hdr);
+ file_len = image_get_size(hdr);
+ }
+
+ /* save the "data file" into the file system */
+ return image_save_datafile(params, file_data, file_len);
+}
+
/*
* Default image type parameters definition
*/
@@ -128,10 +184,11 @@
.verify_header = image_verify_header,
.print_header = image_print_contents,
.set_header = image_set_header,
+ .extract_datafile = image_extract_datafile,
.check_params = image_check_params,
};
void init_default_image_type(void)
{
- mkimage_register(&defimage_params);
+ register_image_type(&defimage_params);
}
diff --git a/tools/dumpimage.c b/tools/dumpimage.c
new file mode 100644
index 0000000..542ee28
--- /dev/null
+++ b/tools/dumpimage.c
@@ -0,0 +1,305 @@
+/*
+ * Based on mkimage.c.
+ *
+ * Written by Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include "dumpimage.h"
+#include <image.h>
+#include <version.h>
+
+static void usage(void);
+
+/* image_type_params linked list to maintain registered image types supports */
+static struct image_type_params *dumpimage_tparams;
+
+/* parameters initialized by core will be used by the image type code */
+static struct image_tool_params params = {
+ .type = IH_TYPE_KERNEL,
+};
+
+/**
+ * dumpimage_register() - register respective image generation/list support
+ *
+ * the input struct image_type_params is checked and appended to the link
+ * list, if the input structure is already registered, issue an error
+ *
+ * @tparams: Image type parameters
+ */
+static void dumpimage_register(struct image_type_params *tparams)
+{
+ struct image_type_params **tp;
+
+ if (!tparams) {
+ fprintf(stderr, "%s: %s: Null input\n", params.cmdname,
+ __func__);
+ exit(EXIT_FAILURE);
+ }
+
+ /* scan the linked list, check for registry and point the last one */
+ for (tp = &dumpimage_tparams; *tp != NULL; tp = &(*tp)->next) {
+ if (!strcmp((*tp)->name, tparams->name)) {
+ fprintf(stderr, "%s: %s already registered\n",
+ params.cmdname, tparams->name);
+ return;
+ }
+ }
+
+ /* add input struct entry at the end of link list */
+ *tp = tparams;
+ /* mark input entry as last entry in the link list */
+ tparams->next = NULL;
+
+ debug("Registered %s\n", tparams->name);
+}
+
+/**
+ * dumpimage_get_type() - find the image type params for a given image type
+ *
+ * Scan all registered image types and check the input type_id for each
+ * supported image type
+ *
+ * @return respective image_type_params pointer. If the input type is not
+ * supported by any of registered image types, returns NULL
+ */
+static struct image_type_params *dumpimage_get_type(int type)
+{
+ struct image_type_params *curr;
+
+ for (curr = dumpimage_tparams; curr != NULL; curr = curr->next) {
+ if (curr->check_image_type) {
+ if (!curr->check_image_type(type))
+ return curr;
+ }
+ }
+ return NULL;
+}
+
+/*
+ * dumpimage_verify_print_header() - verifies the image header
+ *
+ * Scan registered image types and verify the image_header for each
+ * supported image type. If verification is successful, this prints
+ * the respective header.
+ *
+ * @return 0 on success, negative if input image format does not match with
+ * any of supported image types
+ */
+static int dumpimage_verify_print_header(void *ptr, struct stat *sbuf)
+{
+ int retval = -1;
+ struct image_type_params *curr;
+
+ for (curr = dumpimage_tparams; curr != NULL; curr = curr->next) {
+ if (curr->verify_header) {
+ retval = curr->verify_header((unsigned char *)ptr,
+ sbuf->st_size, ¶ms);
+ if (retval != 0)
+ continue;
+ /*
+ * Print the image information if verify is
+ * successful
+ */
+ if (curr->print_header) {
+ curr->print_header(ptr);
+ } else {
+ fprintf(stderr,
+ "%s: print_header undefined for %s\n",
+ params.cmdname, curr->name);
+ }
+ break;
+ }
+ }
+
+ return retval;
+}
+
+/*
+ * dumpimage_extract_datafile -
+ *
+ * It scans all registered image types,
+ * verifies image_header for each supported image type
+ * if verification is successful, it extracts the desired file,
+ * indexed by pflag, from the image
+ *
+ * returns negative if input image format does not match with any of
+ * supported image types
+ */
+static int dumpimage_extract_datafile(void *ptr, struct stat *sbuf)
+{
+ int retval = -1;
+ struct image_type_params *curr;
+
+ for (curr = dumpimage_tparams; curr != NULL; curr = curr->next) {
+ if (curr->verify_header) {
+ retval = curr->verify_header((unsigned char *)ptr,
+ sbuf->st_size, ¶ms);
+ if (retval != 0)
+ continue;
+ /*
+ * Extract the file from the image
+ * if verify is successful
+ */
+ if (curr->extract_datafile) {
+ curr->extract_datafile(ptr, ¶ms);
+ } else {
+ fprintf(stderr,
+ "%s: extract_datafile undefined for %s\n",
+ params.cmdname, curr->name);
+ break;
+ }
+ }
+ }
+
+ return retval;
+}
+
+int main(int argc, char **argv)
+{
+ int opt;
+ int ifd = -1;
+ struct stat sbuf;
+ char *ptr;
+ int retval = 0;
+ struct image_type_params *tparams = NULL;
+
+ /* Init all image generation/list support */
+ register_image_tool(dumpimage_register);
+
+ params.cmdname = *argv;
+
+ while ((opt = getopt(argc, argv, "li:o:p:V")) != -1) {
+ switch (opt) {
+ case 'l':
+ params.lflag = 1;
+ break;
+ case 'i':
+ params.imagefile = optarg;
+ params.iflag = 1;
+ break;
+ case 'o':
+ params.outfile = optarg;
+ break;
+ case 'p':
+ params.pflag = strtoul(optarg, &ptr, 10);
+ if (*ptr) {
+ fprintf(stderr,
+ "%s: invalid file position %s\n",
+ params.cmdname, *argv);
+ exit(EXIT_FAILURE);
+ }
+ break;
+ case 'V':
+ printf("dumpimage version %s\n", PLAIN_VERSION);
+ exit(EXIT_SUCCESS);
+ default:
+ usage();
+ }
+ }
+
+ if (optind >= argc)
+ usage();
+
+ /* set tparams as per input type_id */
+ tparams = dumpimage_get_type(params.type);
+ if (tparams == NULL) {
+ fprintf(stderr, "%s: unsupported type %s\n",
+ params.cmdname, genimg_get_type_name(params.type));
+ exit(EXIT_FAILURE);
+ }
+
+ /*
+ * check the passed arguments parameters meets the requirements
+ * as per image type to be generated/listed
+ */
+ if (tparams->check_params) {
+ if (tparams->check_params(¶ms))
+ usage();
+ }
+
+ if (params.iflag)
+ params.datafile = argv[optind];
+ else
+ params.imagefile = argv[optind];
+ if (!params.outfile)
+ params.outfile = params.datafile;
+
+ ifd = open(params.imagefile, O_RDONLY|O_BINARY);
+ if (ifd < 0) {
+ fprintf(stderr, "%s: Can't open \"%s\": %s\n",
+ params.cmdname, params.imagefile,
+ strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+
+ if (params.lflag || params.iflag) {
+ if (fstat(ifd, &sbuf) < 0) {
+ fprintf(stderr, "%s: Can't stat \"%s\": %s\n",
+ params.cmdname, params.imagefile,
+ strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+
+ if ((unsigned)sbuf.st_size < tparams->header_size) {
+ fprintf(stderr,
+ "%s: Bad size: \"%s\" is not valid image\n",
+ params.cmdname, params.imagefile);
+ exit(EXIT_FAILURE);
+ }
+
+ ptr = mmap(0, sbuf.st_size, PROT_READ, MAP_SHARED, ifd, 0);
+ if (ptr == MAP_FAILED) {
+ fprintf(stderr, "%s: Can't read \"%s\": %s\n",
+ params.cmdname, params.imagefile,
+ strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+
+ /*
+ * Both calls bellow scan through dumpimage registry for all
+ * supported image types and verify the input image file
+ * header for match
+ */
+ if (params.iflag) {
+ /*
+ * Extract the data files from within the matched
+ * image type. Returns the error code if not matched
+ */
+ retval = dumpimage_extract_datafile(ptr, &sbuf);
+ } else {
+ /*
+ * Print the image information for matched image type
+ * Returns the error code if not matched
+ */
+ retval = dumpimage_verify_print_header(ptr, &sbuf);
+ }
+
+ (void)munmap((void *)ptr, sbuf.st_size);
+ (void)close(ifd);
+
+ return retval;
+ }
+
+ (void)close(ifd);
+
+ return EXIT_SUCCESS;
+}
+
+static void usage(void)
+{
+ fprintf(stderr, "Usage: %s -l image\n"
+ " -l ==> list image header information\n",
+ params.cmdname);
+ fprintf(stderr,
+ " %s -i image [-p position] [-o outfile] data_file\n"
+ " -i ==> extract from the 'image' a specific 'data_file'"
+ ", indexed by 'position' (starting at 0)\n",
+ params.cmdname);
+ fprintf(stderr,
+ " %s -V ==> print version information and exit\n",
+ params.cmdname);
+
+ exit(EXIT_FAILURE);
+}
diff --git a/tools/dumpimage.h b/tools/dumpimage.h
new file mode 100644
index 0000000..d78523d
--- /dev/null
+++ b/tools/dumpimage.h
@@ -0,0 +1,33 @@
+/*
+ * Based on mkimage.c.
+ *
+ * Written by Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _DUMPIMAGE_H_
+#define _DUMPIMAGE_H_
+
+#include "os_support.h"
+#include <errno.h>
+#include <fcntl.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/stat.h>
+#include <time.h>
+#include <unistd.h>
+#include <sha1.h>
+#include "fdt_host.h"
+#include "imagetool.h"
+
+#undef DUMPIMAGE_DEBUG
+
+#ifdef DUMPIMAGE_DEBUG
+#define debug(fmt, args...) printf(fmt, ##args)
+#else
+#define debug(fmt, args...)
+#endif /* DUMPIMAGE_DEBUG */
+
+#endif /* _DUMPIMAGE_H_ */
diff --git a/tools/fit_image.c b/tools/fit_image.c
index 0400a60..1466164 100644
--- a/tools/fit_image.c
+++ b/tools/fit_image.c
@@ -14,6 +14,7 @@
* SPDX-License-Identifier: GPL-2.0+
*/
+#include "imagetool.h"
#include "mkimage.h"
#include <image.h>
#include <u-boot/crc.h>
@@ -21,7 +22,7 @@
static image_header_t header;
static int fit_verify_header (unsigned char *ptr, int image_size,
- struct mkimage_params *params)
+ struct image_tool_params *params)
{
return fdt_check_header(ptr);
}
@@ -34,7 +35,7 @@
return EXIT_FAILURE;
}
-int mmap_fdt(struct mkimage_params *params, const char *fname, void **blobp,
+int mmap_fdt(struct image_tool_params *params, const char *fname, void **blobp,
struct stat *sbuf)
{
void *ptr;
@@ -88,7 +89,7 @@
* returns:
* only on success, otherwise calls exit (EXIT_FAILURE);
*/
-static int fit_handle_file (struct mkimage_params *params)
+static int fit_handle_file(struct image_tool_params *params)
{
char tmpfile[MKIMAGE_MAX_TMPFILE_LEN];
char cmd[MKIMAGE_MAX_DTC_CMDLINE_LEN];
@@ -184,7 +185,7 @@
return -1;
}
-static int fit_check_params (struct mkimage_params *params)
+static int fit_check_params(struct image_tool_params *params)
{
return ((params->dflag && (params->fflag || params->lflag)) ||
(params->fflag && (params->dflag || params->lflag)) ||
@@ -205,5 +206,5 @@
void init_fit_image_type (void)
{
- mkimage_register (&fitimage_params);
+ register_image_type(&fitimage_params);
}
diff --git a/tools/imagetool.c b/tools/imagetool.c
new file mode 100644
index 0000000..29d2189
--- /dev/null
+++ b/tools/imagetool.c
@@ -0,0 +1,58 @@
+/*
+ * (C) Copyright 2013
+ *
+ * Written by Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include "imagetool.h"
+
+/*
+ * Callback function to register a image type within a tool
+ */
+static imagetool_register_t register_func;
+
+/*
+ * register_image_tool -
+ *
+ * The tool provides its own registration function in order to all image
+ * types initialize themselves.
+ */
+void register_image_tool(imagetool_register_t image_register)
+{
+ /*
+ * Save the image tool callback function. It will be used to register
+ * image types within that tool
+ */
+ register_func = image_register;
+
+ /* Init Freescale PBL Boot image generation/list support */
+ init_pbl_image_type();
+ /* Init Kirkwood Boot image generation/list support */
+ init_kwb_image_type();
+ /* Init Freescale imx Boot image generation/list support */
+ init_imx_image_type();
+ /* Init Freescale mxs Boot image generation/list support */
+ init_mxs_image_type();
+ /* Init FIT image generation/list support */
+ init_fit_image_type();
+ /* Init TI OMAP Boot image generation/list support */
+ init_omap_image_type();
+ /* Init Default image generation/list support */
+ init_default_image_type();
+ /* Init Davinci UBL support */
+ init_ubl_image_type();
+ /* Init Davinci AIS support */
+ init_ais_image_type();
+}
+
+/*
+ * register_image_type -
+ *
+ * Register a image type within a tool
+ */
+void register_image_type(struct image_type_params *tparams)
+{
+ register_func(tparams);
+}
diff --git a/tools/imagetool.h b/tools/imagetool.h
new file mode 100644
index 0000000..c2c9aea
--- /dev/null
+++ b/tools/imagetool.h
@@ -0,0 +1,173 @@
+/*
+ * (C) Copyright 2013
+ *
+ * Written by Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _IMAGETOOL_H_
+#define _IMAGETOOL_H_
+
+#include "os_support.h"
+#include <errno.h>
+#include <fcntl.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/stat.h>
+#include <time.h>
+#include <unistd.h>
+#include <sha1.h>
+#include "fdt_host.h"
+
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
+#define IH_ARCH_DEFAULT IH_ARCH_INVALID
+
+/*
+ * This structure defines all such variables those are initialized by
+ * mkimage and dumpimage main core and need to be referred by image
+ * type specific functions
+ */
+struct image_tool_params {
+ int dflag;
+ int eflag;
+ int fflag;
+ int iflag;
+ int lflag;
+ int pflag;
+ int vflag;
+ int xflag;
+ int skipcpy;
+ int os;
+ int arch;
+ int type;
+ int comp;
+ char *dtc;
+ unsigned int addr;
+ unsigned int ep;
+ char *imagename;
+ char *imagename2;
+ char *datafile;
+ char *imagefile;
+ char *cmdname;
+ const char *outfile; /* Output filename */
+ const char *keydir; /* Directory holding private keys */
+ const char *keydest; /* Destination .dtb for public key */
+ const char *comment; /* Comment to add to signature node */
+ int require_keys; /* 1 to mark signing keys as 'required' */
+};
+
+/*
+ * image type specific variables and callback functions
+ */
+struct image_type_params {
+ /* name is an identification tag string for added support */
+ char *name;
+ /*
+ * header size is local to the specific image type to be supported,
+ * mkimage core treats this as number of bytes
+ */
+ uint32_t header_size;
+ /* Image type header pointer */
+ void *hdr;
+ /*
+ * There are several arguments that are passed on the command line
+ * and are registered as flags in image_tool_params structure.
+ * This callback function can be used to check the passed arguments
+ * are in-lined with the image type to be supported
+ *
+ * Returns 1 if parameter check is successful
+ */
+ int (*check_params) (struct image_tool_params *);
+ /*
+ * This function is used by list command (i.e. mkimage -l <filename>)
+ * image type verification code must be put here
+ *
+ * Returns 0 if image header verification is successful
+ * otherwise, returns respective negative error codes
+ */
+ int (*verify_header) (unsigned char *, int, struct image_tool_params *);
+ /* Prints image information abstracting from image header */
+ void (*print_header) (const void *);
+ /*
+ * The header or image contents need to be set as per image type to
+ * be generated using this callback function.
+ * further output file post processing (for ex. checksum calculation,
+ * padding bytes etc..) can also be done in this callback function.
+ */
+ void (*set_header) (void *, struct stat *, int,
+ struct image_tool_params *);
+ /*
+ * This function is used by the command to retrieve a data file from
+ * the image (i.e. dumpimage -i <image> -p <position> <data_file>).
+ * Thus the code to extract a file from an image must be put here.
+ *
+ * Returns 0 if the file was successfully retrieved from the image,
+ * or a negative value on error.
+ */
+ int (*extract_datafile) (void *, struct image_tool_params *);
+ /*
+ * Some image generation support for ex (default image type) supports
+ * more than one type_ids, this callback function is used to check
+ * whether input (-T <image_type>) is supported by registered image
+ * generation/list low level code
+ */
+ int (*check_image_type) (uint8_t);
+ /* This callback function will be executed if fflag is defined */
+ int (*fflag_handle) (struct image_tool_params *);
+ /*
+ * This callback function will be executed for variable size record
+ * It is expected to build this header in memory and return its length
+ * and a pointer to it by using image_type_params.header_size and
+ * image_type_params.hdr. The return value shall indicate if an
+ * additional padding should be used when copying the data image
+ * by returning the padding length.
+ */
+ int (*vrec_header) (struct image_tool_params *,
+ struct image_type_params *);
+ /* pointer to the next registered entry in linked list */
+ struct image_type_params *next;
+};
+
+/*
+ * Tool registration function.
+ */
+typedef void (*imagetool_register_t)(struct image_type_params *);
+
+/*
+ * Initializes all image types with the given registration callback
+ * function.
+ * An image tool uses this function to initialize all image types.
+ */
+void register_image_tool(imagetool_register_t image_register);
+
+/*
+ * Register a image type within a tool.
+ * An image type uses this function to register itself within
+ * all tools.
+ */
+void register_image_type(struct image_type_params *tparams);
+
+/*
+ * There is a c file associated with supported image type low level code
+ * for ex. default_image.c, fit_image.c
+ * init_xxx_type() is the only function referred by image tool core to avoid
+ * a single lined header file, you can define them here
+ *
+ * Supported image types init functions
+ */
+void init_default_image_type(void);
+void init_pbl_image_type(void);
+void init_ais_image_type(void);
+void init_kwb_image_type(void);
+void init_imx_image_type(void);
+void init_mxs_image_type(void);
+void init_fit_image_type(void);
+void init_ubl_image_type(void);
+void init_omap_image_type(void);
+
+void pbl_load_uboot(int fd, struct image_tool_params *mparams);
+
+#endif /* _IMAGETOOL_H_ */
diff --git a/tools/imximage.c b/tools/imximage.c
index 511e3f2..18dc051 100644
--- a/tools/imximage.c
+++ b/tools/imximage.c
@@ -9,7 +9,7 @@
* SPDX-License-Identifier: GPL-2.0+
*/
-#include "mkimage.h"
+#include "imagetool.h"
#include <image.h>
#include "imximage.h"
@@ -520,7 +520,7 @@
}
static int imximage_verify_header(unsigned char *ptr, int image_size,
- struct mkimage_params *params)
+ struct image_tool_params *params)
{
struct imx_header *imx_hdr = (struct imx_header *) ptr;
@@ -549,7 +549,7 @@
}
static void imximage_set_header(void *ptr, struct stat *sbuf, int ifd,
- struct mkimage_params *params)
+ struct image_tool_params *params)
{
struct imx_header *imxhdr = (struct imx_header *)ptr;
uint32_t dcd_len;
@@ -589,7 +589,7 @@
}
}
-int imximage_check_params(struct mkimage_params *params)
+int imximage_check_params(struct image_tool_params *params)
{
if (!params)
return CFG_INVALID;
@@ -611,7 +611,7 @@
(params->xflag) || !(strlen(params->imagename));
}
-static int imximage_generate(struct mkimage_params *params,
+static int imximage_generate(struct image_tool_params *params,
struct image_type_params *tparams)
{
struct imx_header *imxhdr;
@@ -701,5 +701,5 @@
void init_imx_image_type(void)
{
- mkimage_register(&imximage_params);
+ register_image_type(&imximage_params);
}
diff --git a/tools/kwbimage.c b/tools/kwbimage.c
index 1df6b20..109d616 100644
--- a/tools/kwbimage.c
+++ b/tools/kwbimage.c
@@ -6,7 +6,7 @@
* SPDX-License-Identifier: GPL-2.0+
*/
-#include "mkimage.h"
+#include "imagetool.h"
#include <image.h>
#include "kwbimage.h"
@@ -54,7 +54,7 @@
/*
* Report Error if xflag is set in addition to default
*/
-static int kwbimage_check_params (struct mkimage_params *params)
+static int kwbimage_check_params(struct image_tool_params *params)
{
if (!strlen (params->imagename)) {
printf ("Error:%s - Configuration file not specified, "
@@ -288,7 +288,7 @@
}
static void kwbimage_set_header (void *ptr, struct stat *sbuf, int ifd,
- struct mkimage_params *params)
+ struct image_tool_params *params)
{
struct kwb_header *hdr = (struct kwb_header *)ptr;
bhr_t *mhdr = &hdr->kwb_hdr;
@@ -322,7 +322,7 @@
}
static int kwbimage_verify_header (unsigned char *ptr, int image_size,
- struct mkimage_params *params)
+ struct image_tool_params *params)
{
struct kwb_header *hdr = (struct kwb_header *)ptr;
bhr_t *mhdr = &hdr->kwb_hdr;
@@ -382,5 +382,5 @@
void init_kwb_image_type (void)
{
- mkimage_register (&kwbimage_params);
+ register_image_type(&kwbimage_params);
}
diff --git a/tools/mkimage.c b/tools/mkimage.c
index 7f22101..123d0c7 100644
--- a/tools/mkimage.c
+++ b/tools/mkimage.c
@@ -19,7 +19,7 @@
struct image_type_params *mkimage_tparams = NULL;
/* parameters initialized by core will be used by the image type code */
-struct mkimage_params params = {
+struct image_tool_params params = {
.os = IH_OS_LINUX,
.arch = IH_ARCH_PPC,
.type = IH_TYPE_KERNEL,
@@ -139,24 +139,8 @@
struct image_type_params *tparams = NULL;
int pad_len = 0;
- /* Init Freescale PBL Boot image generation/list support */
- init_pbl_image_type();
- /* Init Kirkwood Boot image generation/list support */
- init_kwb_image_type ();
- /* Init Freescale imx Boot image generation/list support */
- init_imx_image_type ();
- /* Init Freescale mxs Boot image generation/list support */
- init_mxs_image_type();
- /* Init FIT image generation/list support */
- init_fit_image_type ();
- /* Init TI OMAP Boot image generation/list support */
- init_omap_image_type();
- /* Init Default image generation/list support */
- init_default_image_type ();
- /* Init Davinci UBL support */
- init_ubl_image_type();
- /* Init Davinci AIS support */
- init_ais_image_type();
+ /* Init all image generation/list support */
+ register_image_tool(mkimage_register);
params.cmdname = *argv;
params.addr = params.ep = 0;
@@ -632,8 +616,7 @@
(void) close (dfd);
}
-void
-usage ()
+static void usage(void)
{
fprintf (stderr, "Usage: %s -l image\n"
" -l ==> list image header information\n",
diff --git a/tools/mkimage.h b/tools/mkimage.h
index af49154..d5491b6 100644
--- a/tools/mkimage.h
+++ b/tools/mkimage.h
@@ -20,6 +20,7 @@
#include <unistd.h>
#include <sha1.h>
#include "fdt_host.h"
+#include "imagetool.h"
#undef MKIMAGE_DEBUG
@@ -29,8 +30,6 @@
#define debug(fmt,args...)
#endif /* MKIMAGE_DEBUG */
-#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-
static inline void *map_sysmem(ulong paddr, unsigned long len)
{
return (void *)(uintptr_t)paddr;
@@ -47,124 +46,4 @@
#define MKIMAGE_MAX_DTC_CMDLINE_LEN 512
#define MKIMAGE_DTC "dtc" /* assume dtc is in $PATH */
-#define IH_ARCH_DEFAULT IH_ARCH_INVALID
-
-/*
- * This structure defines all such variables those are initialized by
- * mkimage main core and need to be referred by image type specific
- * functions
- */
-struct mkimage_params {
- int dflag;
- int eflag;
- int fflag;
- int lflag;
- int vflag;
- int xflag;
- int skipcpy;
- int os;
- int arch;
- int type;
- int comp;
- char *dtc;
- unsigned int addr;
- unsigned int ep;
- char *imagename;
- char *imagename2;
- char *datafile;
- char *imagefile;
- char *cmdname;
- const char *keydir; /* Directory holding private keys */
- const char *keydest; /* Destination .dtb for public key */
- const char *comment; /* Comment to add to signature node */
- int require_keys; /* 1 to mark signing keys as 'required' */
-};
-
-/*
- * image type specific variables and callback functions
- */
-struct image_type_params {
- /* name is an identification tag string for added support */
- char *name;
- /*
- * header size is local to the specific image type to be supported,
- * mkimage core treats this as number of bytes
- */
- uint32_t header_size;
- /* Image type header pointer */
- void *hdr;
- /*
- * There are several arguments that are passed on the command line
- * and are registered as flags in mkimage_params structure.
- * This callback function can be used to check the passed arguments
- * are in-lined with the image type to be supported
- *
- * Returns 1 if parameter check is successful
- */
- int (*check_params) (struct mkimage_params *);
- /*
- * This function is used by list command (i.e. mkimage -l <filename>)
- * image type verification code must be put here
- *
- * Returns 0 if image header verification is successful
- * otherwise, returns respective negative error codes
- */
- int (*verify_header) (unsigned char *, int, struct mkimage_params *);
- /* Prints image information abstracting from image header */
- void (*print_header) (const void *);
- /*
- * The header or image contents need to be set as per image type to
- * be generated using this callback function.
- * further output file post processing (for ex. checksum calculation,
- * padding bytes etc..) can also be done in this callback function.
- */
- void (*set_header) (void *, struct stat *, int,
- struct mkimage_params *);
- /*
- * Some image generation support for ex (default image type) supports
- * more than one type_ids, this callback function is used to check
- * whether input (-T <image_type>) is supported by registered image
- * generation/list low level code
- */
- int (*check_image_type) (uint8_t);
- /* This callback function will be executed if fflag is defined */
- int (*fflag_handle) (struct mkimage_params *);
- /*
- * This callback function will be executed for variable size record
- * It is expected to build this header in memory and return its length
- * and a pointer to it by using image_type_params.header_size and
- * image_type_params.hdr. The return value shall indicate if an
- * additional padding should be used when copying the data image
- * by returning the padding length.
- */
- int (*vrec_header) (struct mkimage_params *,
- struct image_type_params *);
- /* pointer to the next registered entry in linked list */
- struct image_type_params *next;
-};
-
-/*
- * Exported functions
- */
-void mkimage_register (struct image_type_params *tparams);
-
-/*
- * There is a c file associated with supported image type low level code
- * for ex. default_image.c, fit_image.c
- * init is the only function referred by mkimage core.
- * to avoid a single lined header file, you can define them here
- *
- * Supported image types init functions
- */
-void pbl_load_uboot(int fd, struct mkimage_params *mparams);
-void init_pbl_image_type(void);
-void init_ais_image_type(void);
-void init_kwb_image_type (void);
-void init_imx_image_type (void);
-void init_mxs_image_type(void);
-void init_default_image_type (void);
-void init_fit_image_type (void);
-void init_ubl_image_type(void);
-void init_omap_image_type(void);
-
#endif /* _MKIIMAGE_H_ */
diff --git a/tools/mxsimage.c b/tools/mxsimage.c
index 7bd9dee..045b35a 100644
--- a/tools/mxsimage.c
+++ b/tools/mxsimage.c
@@ -17,7 +17,7 @@
#include <openssl/evp.h>
-#include "mkimage.h"
+#include "imagetool.h"
#include "mxsimage.h"
#include <image.h>
@@ -2149,11 +2149,11 @@
}
static void mxsimage_set_header(void *ptr, struct stat *sbuf, int ifd,
- struct mkimage_params *params)
+ struct image_tool_params *params)
{
}
-int mxsimage_check_params(struct mkimage_params *params)
+int mxsimage_check_params(struct image_tool_params *params)
{
if (!params)
return -1;
@@ -2194,7 +2194,7 @@
char *imagefile;
static int mxsimage_verify_header(unsigned char *ptr, int image_size,
- struct mkimage_params *params)
+ struct image_tool_params *params)
{
struct sb_boot_image_header *hdr;
@@ -2292,7 +2292,7 @@
return 0;
}
-static int mxsimage_generate(struct mkimage_params *params,
+static int mxsimage_generate(struct image_tool_params *params,
struct image_type_params *tparams)
{
int ret;
@@ -2338,7 +2338,7 @@
void init_mxs_image_type(void)
{
- mkimage_register(&mxsimage_params);
+ register_image_type(&mxsimage_params);
}
#else
diff --git a/tools/omapimage.c b/tools/omapimage.c
index 8774a7e..d59bc4d 100644
--- a/tools/omapimage.c
+++ b/tools/omapimage.c
@@ -14,7 +14,7 @@
* SPDX-License-Identifier: GPL-2.0+
*/
-#include "mkimage.h"
+#include "imagetool.h"
#include <image.h>
#include "omapimage.h"
@@ -69,7 +69,7 @@
}
static int omapimage_verify_header(unsigned char *ptr, int image_size,
- struct mkimage_params *params)
+ struct image_tool_params *params)
{
struct ch_toc *toc = (struct ch_toc *)ptr;
struct gp_header *gph = (struct gp_header *)(ptr+OMAP_CH_HDR_SIZE);
@@ -188,7 +188,7 @@
}
static void omapimage_set_header(void *ptr, struct stat *sbuf, int ifd,
- struct mkimage_params *params)
+ struct image_tool_params *params)
{
struct ch_toc *toc = (struct ch_toc *)ptr;
struct ch_settings *chs = (struct ch_settings *)
@@ -224,7 +224,7 @@
}
}
-int omapimage_check_params(struct mkimage_params *params)
+int omapimage_check_params(struct image_tool_params *params)
{
return (params->dflag && (params->fflag || params->lflag)) ||
(params->fflag && (params->dflag || params->lflag)) ||
@@ -247,5 +247,5 @@
void init_omap_image_type(void)
{
- mkimage_register(&omapimage_params);
+ register_image_type(&omapimage_params);
}
diff --git a/tools/pblimage.c b/tools/pblimage.c
index bac5faf..ef3d7f6 100644
--- a/tools/pblimage.c
+++ b/tools/pblimage.c
@@ -3,7 +3,7 @@
*
* SPDX-License-Identifier: GPL-2.0+
*/
-#include "mkimage.h"
+#include "imagetool.h"
#include <image.h>
#include "pblimage.h"
@@ -242,7 +242,7 @@
}
}
-void pbl_load_uboot(int ifd, struct mkimage_params *params)
+void pbl_load_uboot(int ifd, struct image_tool_params *params)
{
FILE *fp_uboot;
int size;
@@ -281,7 +281,7 @@
}
static int pblimage_verify_header(unsigned char *ptr, int image_size,
- struct mkimage_params *params)
+ struct image_tool_params *params)
{
struct pbl_header *pbl_hdr = (struct pbl_header *) ptr;
@@ -308,7 +308,7 @@
}
static void pblimage_set_header(void *ptr, struct stat *sbuf, int ifd,
- struct mkimage_params *params)
+ struct image_tool_params *params)
{
/*nothing need to do, pbl_load_uboot takes care of whole file. */
}
@@ -327,5 +327,5 @@
void init_pbl_image_type(void)
{
pbl_size = 0;
- mkimage_register(&pblimage_params);
+ register_image_type(&pblimage_params);
}
diff --git a/tools/relocate-rela.c b/tools/relocate-rela.c
new file mode 100644
index 0000000..93b4c39
--- /dev/null
+++ b/tools/relocate-rela.c
@@ -0,0 +1,189 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause
+ *
+ * 64-bit and little-endian target only until we need to support a different
+ * arch that needs this.
+ */
+
+#include <elf.h>
+#include <errno.h>
+#include <inttypes.h>
+#include <stdarg.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#ifndef R_AARCH64_RELATIVE
+#define R_AARCH64_RELATIVE 1027
+#endif
+
+static const bool debug_en;
+
+static void debug(const char *fmt, ...)
+{
+ va_list args;
+
+ va_start(args, fmt);
+ if (debug_en)
+ vprintf(fmt, args);
+}
+
+static bool supported_rela(Elf64_Rela *rela)
+{
+ uint64_t mask = 0xffffffffULL; /* would be different on 32-bit */
+ uint32_t type = rela->r_info & mask;
+
+ switch (type) {
+#ifdef R_AARCH64_RELATIVE
+ case R_AARCH64_RELATIVE:
+ return true;
+#endif
+ default:
+ fprintf(stderr, "warning: unsupported relocation type %"
+ PRIu32 " at %" PRIx64 "\n",
+ type, rela->r_offset);
+
+ return false;
+ }
+}
+
+static inline uint64_t swap64(uint64_t val)
+{
+ return ((val >> 56) & 0x00000000000000ffULL) |
+ ((val >> 40) & 0x000000000000ff00ULL) |
+ ((val >> 24) & 0x0000000000ff0000ULL) |
+ ((val >> 8) & 0x00000000ff000000ULL) |
+ ((val << 8) & 0x000000ff00000000ULL) |
+ ((val << 24) & 0x0000ff0000000000ULL) |
+ ((val << 40) & 0x00ff000000000000ULL) |
+ ((val << 56) & 0xff00000000000000ULL);
+}
+
+#if __BYTE_ORDER == __LITTLE_ENDIAN
+static inline uint64_t be64(uint64_t val)
+{
+ return swap64(val);
+}
+
+static inline uint64_t le64(uint64_t val)
+{
+ return val;
+}
+#else
+static inline uint64_t le64(uint64_t val)
+{
+ return swap64(val);
+}
+
+static inline uint64_t be64(uint64_t val)
+{
+ return val;
+}
+#endif
+
+static bool read_num(const char *str, uint64_t *num)
+{
+ char *endptr;
+ *num = strtoull(str, &endptr, 16);
+ return str[0] && !endptr[0];
+}
+
+int main(int argc, char **argv)
+{
+ FILE *f;
+ int i, num;
+ uint64_t rela_start, rela_end, text_base;
+
+ if (argc != 5) {
+ fprintf(stderr, "Statically apply ELF rela relocations\n");
+ fprintf(stderr, "Usage: %s <bin file> <text base> " \
+ "<rela start> <rela end>\n", argv[0]);
+ fprintf(stderr, "All numbers in hex.\n");
+ return 1;
+ }
+
+ f = fopen(argv[1], "r+b");
+ if (!f) {
+ fprintf(stderr, "%s: Cannot open %s: %s\n",
+ argv[0], argv[1], strerror(errno));
+ return 2;
+ }
+
+ if (!read_num(argv[2], &text_base) ||
+ !read_num(argv[3], &rela_start) ||
+ !read_num(argv[4], &rela_end)) {
+ fprintf(stderr, "%s: bad number\n", argv[0]);
+ return 3;
+ }
+
+ if (rela_start > rela_end || rela_start < text_base ||
+ (rela_end - rela_start) % 24) {
+ fprintf(stderr, "%s: bad rela bounds\n", argv[0]);
+ return 3;
+ }
+
+ rela_start -= text_base;
+ rela_end -= text_base;
+
+ num = (rela_end - rela_start) / sizeof(Elf64_Rela);
+
+ for (i = 0; i < num; i++) {
+ Elf64_Rela rela, swrela;
+ uint64_t pos = rela_start + sizeof(Elf64_Rela) * i;
+ uint64_t addr;
+
+ if (fseek(f, pos, SEEK_SET) < 0) {
+ fprintf(stderr, "%s: %s: seek to %" PRIx64
+ " failed: %s\n",
+ argv[0], argv[1], pos, strerror(errno));
+ }
+
+ if (fread(&rela, sizeof(rela), 1, f) != 1) {
+ fprintf(stderr, "%s: %s: read rela failed at %"
+ PRIx64 "\n",
+ argv[0], argv[1], pos);
+ return 4;
+ }
+
+ swrela.r_offset = le64(rela.r_offset);
+ swrela.r_info = le64(rela.r_info);
+ swrela.r_addend = le64(rela.r_addend);
+
+ if (!supported_rela(&swrela))
+ continue;
+
+ debug("Rela %" PRIx64 " %" PRIu64 " %" PRIx64 "\n",
+ swrela.r_offset, swrela.r_info, swrela.r_addend);
+
+ if (swrela.r_offset < text_base) {
+ fprintf(stderr, "%s: %s: bad rela at %" PRIx64 "\n",
+ argv[0], argv[1], pos);
+ return 4;
+ }
+
+ addr = swrela.r_offset - text_base;
+
+ if (fseek(f, addr, SEEK_SET) < 0) {
+ fprintf(stderr, "%s: %s: seek to %"
+ PRIx64 " failed: %s\n",
+ argv[0], argv[1], addr, strerror(errno));
+ }
+
+ if (fwrite(&rela.r_addend, sizeof(rela.r_addend), 1, f) != 1) {
+ fprintf(stderr, "%s: %s: write failed at %" PRIx64 "\n",
+ argv[0], argv[1], addr);
+ return 4;
+ }
+ }
+
+ if (fclose(f) < 0) {
+ fprintf(stderr, "%s: %s: close failed: %s\n",
+ argv[0], argv[1], strerror(errno));
+ return 4;
+ }
+
+ return 0;
+}
diff --git a/tools/ublimage.c b/tools/ublimage.c
index aafe248..cbbbe20 100644
--- a/tools/ublimage.c
+++ b/tools/ublimage.c
@@ -13,7 +13,7 @@
* SPDX-License-Identifier: GPL-2.0+
*/
-#include "mkimage.h"
+#include "imagetool.h"
#include <image.h>
#include "ublimage.h"
@@ -193,7 +193,7 @@
}
static int ublimage_verify_header(unsigned char *ptr, int image_size,
- struct mkimage_params *params)
+ struct image_tool_params *params)
{
struct ubl_header *ubl_hdr = (struct ubl_header *)ptr;
@@ -211,7 +211,7 @@
}
static void ublimage_set_header(void *ptr, struct stat *sbuf, int ifd,
- struct mkimage_params *params)
+ struct image_tool_params *params)
{
struct ubl_header *ublhdr = (struct ubl_header *)ptr;
@@ -219,7 +219,7 @@
parse_cfg_file(ublhdr, params->imagename);
}
-int ublimage_check_params(struct mkimage_params *params)
+int ublimage_check_params(struct image_tool_params *params)
{
if (!params)
return CFG_INVALID;
@@ -257,5 +257,5 @@
void init_ubl_image_type(void)
{
- mkimage_register(&ublimage_params);
+ register_image_type(&ublimage_params);
}