Merge branch 'master' of git://git.denx.de/u-boot-spi
diff --git a/.gitignore b/.gitignore
index ed21203..771b860 100644
--- a/.gitignore
+++ b/.gitignore
@@ -46,6 +46,7 @@
/u-boot.ais
/u-boot.dtb
/u-boot.sb
+/u-boot.bd
/u-boot.geany
#
@@ -79,5 +80,11 @@
/ctags
/etags
+# gnu global files
+GPATH
+GRTAGS
+GSYMS
+GTAGS
+
# spl ais files
/spl/*.ais
diff --git a/MAINTAINERS b/MAINTAINERS
index 643a5ac..7820375 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -607,6 +607,7 @@
igep0020 ARM ARMV7 (OMAP3xx SoC)
igep0030 ARM ARMV7 (OMAP3xx SoC)
igep0032 ARM ARMV7 (OMAP3xx SoC)
+ igep0033 ARM ARMV7 (AM33xx Soc)
Eric Benard <eric@eukrea.com>
@@ -664,6 +665,7 @@
mx6qsabresd i.MX6Q
mx6qsabreauto i.MX6Q
wandboard i.MX6DL/S
+ mx6slevk i.MX6SL
Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
@@ -683,7 +685,7 @@
Igor Grinberg <grinberg@compulab.co.il>
- cm-t35 ARM ARMV7 (OMAP3xx Soc)
+ cm_t35 ARM ARMV7 (OMAP3xx Soc)
Stefan Herbrechtsmeier <stefan@code.herbrechtsmeier.net>
@@ -848,6 +850,10 @@
omap4_sdp4430 ARM ARMV7 (OMAP4xx SoC)
omap5_evm ARM ARMV7 (OMAP5xx Soc)
+Suriyan Ramasami <suriyan.r@gmail.com>
+
+ goflexhome ARM926EJS (Kirkwood SoC)
+
Thierry Reding <thierry.reding@avionic-design.de>
plutux Tegra20 (ARM7 & A9 Dual Core)
@@ -877,6 +883,8 @@
x600 ARM926EJS (spear600 Soc)
+ titanium i.MX6Q
+
pdnb3 xscale/ixp
scpu xscale/ixp
@@ -889,6 +897,10 @@
omap3_overo ARM ARMV7 (OMAP3xx SoC)
+Leo Sartre <lsartre@adeneo-embedded.com>
+
+ cgtqmx6qeval i.MX6Q
+
Jens Scharsig <esw@bus-elektronik.de>
eb_cpux9k2 ARM920T (AT91RM9200 SoC)
@@ -914,6 +926,7 @@
Bo Shen <voice.shen@atmel.com>
at91sam9x5ek ARM926EJS (AT91SAM9G15,G25,G35,X25,X35 SoC)
+ sama5d3xek ARMV7 (SAMA5D31, D33, D34, D35 SoC)
Rajeshwari Shinde <rajeshwari.s@samsung.com>
@@ -954,14 +967,20 @@
mx23_olinuxino i.MX23
m28evk i.MX28
sc_sps_1 i.MX28
+ m53evk i.MX53
Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
SFFSDR ARM926EJS
+Lokesh Vutla <lokeshvutla@ti.com>
+
+ dra7xx_evm ARM ARMV7 (DRA7xx Soc)
+
Matt Waddel <matt.waddel@linaro.org>
- ca9x4_ct_vxp ARM ARMV7 (Quad Core)
+ vexpress_ca9x4 ARM ARMV7 (Quad Core)
+ vexpress_ca5x2 ARM ARMV7 (Dual Core)
Otavio Salvador <otavio@ossystems.com.br>
@@ -1014,9 +1033,8 @@
jadecpu ARM926EJS (MB86R01 SoC)
zmx25 ARM926EJS (imx25 SoC)
-Richard Woodruff <r-woodruff2@ti.com>
-
- omap2420h4 ARM1136EJS
+Josh Wu <josh.wu@atmel.com>
+ at91sam9n12ek ARM926EJS (AT91SAM9N12 SoC)
Ilya Yanok <yanok@emcraft.com>
@@ -1052,6 +1070,14 @@
nitrogen6s i.MX6S 512MB
nitrogen6s1g i.MX6S 1GB
+Alison Wang <b18965@freescale.com>
+
+ vf610twr VF610
+
+Sergey Yanovich <ynvich@gmail.com>
+
+ lp8x4x xscale/pxa
+
-------------------------------------------------------------------------
Unknown / orphaned boards:
@@ -1072,9 +1098,19 @@
# Board CPU #
#########################################################################
-Graeme Russ <graeme.russ@gmail.com>
+Simon Glass <sjg@chromium.org>
- eNET AMD SC520
+ chromebook-x86 Coreboot runs first, then U-Boot
+ Supports Intel Sandy Bridge / Ivy Bridge so far
+
+ Chromebooks for x86, including:
+ Samsung Series 5 Chromebook
+ Acer AC700 Chromebook
+ Acer C7 Chromebook
+ Samsung Chromebook 550
+ HP Pavillion Chromebook
+ Acer C710 Chromebook
+ Chromebook Pixel
#########################################################################
# MIPS Systems: #
@@ -1340,5 +1376,16 @@
openrisc-generic OpenRISC
#########################################################################
+# Sandbox: #
+# #
+# Maintainer Name, Email Address #
+# Board CPU #
+#########################################################################
+
+Simon Glass <sjg@chromium.org>
+
+ sandbox sandbox
+
+#########################################################################
# End of MAINTAINERS list #
#########################################################################
diff --git a/Makefile b/Makefile
index dbc4b70..af4c3c0 100644
--- a/Makefile
+++ b/Makefile
@@ -341,7 +341,7 @@
LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
endif
-ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35))
+ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610))
LIBS-y += arch/$(ARCH)/imx-common/libimx-common.o
endif
@@ -522,13 +522,9 @@
cat $(obj)spl/u-boot-spl-pad.ais $(obj)u-boot.img > \
$(obj)u-boot.ais
-# Specify the target for use in elftosb call
-ELFTOSB_TARGET-$(CONFIG_MX23) = imx23
-ELFTOSB_TARGET-$(CONFIG_MX28) = imx28
$(obj)u-boot.sb: $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin
- elftosb -zf $(ELFTOSB_TARGET-y) -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd \
- -o $(obj)u-boot.sb
+ $(MAKE) -C $(SRCTREE)/$(CPUDIR)/$(SOC)/ $(OBJTREE)/u-boot.sb
# On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
# Both images are created using mkimage (crc etc), so that the ROM
@@ -547,18 +543,15 @@
cat $(obj)spl/u-boot-spl-pad.img $(obj)u-boot.img > $@
ifneq ($(CONFIG_TEGRA),)
-ifeq ($(CONFIG_OF_SEPARATE),y)
-nodtb=dtb
-dtbfile=$(obj)u-boot.dtb
-else
-nodtb=nodtb
-dtbfile=
-endif
-
-$(obj)u-boot-$(nodtb)-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(dtbfile)
+$(obj)u-boot-nodtb-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SYS_TEXT_BASE) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
- cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin $(dtbfile) > $@
+ cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@
rm $(obj)spl/u-boot-spl-pad.bin
+
+ifeq ($(CONFIG_OF_SEPARATE),y)
+$(obj)u-boot-dtb-tegra.bin: $(obj)u-boot-nodtb-tegra.bin $(obj)u-boot.dtb
+ cat $(obj)u-boot-nodtb-tegra.bin $(obj)u-boot.dtb > $@
+endif
endif
$(obj)u-boot-img.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
@@ -871,6 +864,7 @@
@rm -f $(obj)u-boot.ais
@rm -f $(obj)u-boot.dtb
@rm -f $(obj)u-boot.sb
+ @rm -f $(obj)u-boot.bd
@rm -f $(obj)u-boot.spr
@rm -f $(obj)nand_spl/{u-boot.{lds,lst},System.map}
@rm -f $(obj)nand_spl/{u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map}
diff --git a/README b/README
index 3d81092..ac1ec44 100644
--- a/README
+++ b/README
@@ -843,6 +843,7 @@
CONFIG_CMD_FDOS * Dos diskette Support
CONFIG_CMD_FLASH flinfo, erase, protect
CONFIG_CMD_FPGA FPGA device initialization support
+ CONFIG_CMD_FUSE Device fuse support
CONFIG_CMD_GETTIME * Get time since boot
CONFIG_CMD_GO * the 'go' command (exec code)
CONFIG_CMD_GREPENV * search environment
@@ -1208,7 +1209,23 @@
If this option is set, the driver enables cache flush.
- TPM Support:
- CONFIG_GENERIC_LPC_TPM
+ CONFIG_TPM
+ Support TPM devices.
+
+ CONFIG_TPM_TIS_I2C
+ Support for i2c bus TPM devices. Only one device
+ per system is supported at this time.
+
+ CONFIG_TPM_TIS_I2C_BUS_NUMBER
+ Define the the i2c bus number for the TPM device
+
+ CONFIG_TPM_TIS_I2C_SLAVE_ADDRESS
+ Define the TPM's address on the i2c bus
+
+ CONFIG_TPM_TIS_I2C_BURST_LIMITATION
+ Define the burst count bytes upper limit
+
+ CONFIG_TPM_TIS_LPC
Support for generic parallel port TPM devices. Only one device
per system is supported at this time.
@@ -1244,6 +1261,9 @@
CONFIG_USB_EHCI_TXFIFO_THRESH enables setting of the
txfilltuning field in the EHCI controller on reset.
+ CONFIG_USB_HUB_MIN_POWER_ON_DELAY defines the minimum
+ interval for usb hub power-on delay.(minimum 100msec)
+
- USB Device:
Define the below if you wish to use the USB console.
Once firmware is rebuilt from a serial console issue the
@@ -2915,12 +2935,30 @@
Address, size and partition on the MMC to load U-Boot from
when the MMC is being used in raw mode.
+ CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR
+ Sector to load kernel uImage from when MMC is being
+ used in raw mode (for Falcon mode)
+
+ CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR,
+ CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS
+ Sector and number of sectors to load kernel argument
+ parameters from when MMC is being used in raw mode
+ (for falcon mode)
+
CONFIG_SPL_FAT_SUPPORT
Support for fs/fat/libfat.o in SPL binary
CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME
Filename to read to load U-Boot when reading from FAT
+ CONFIG_SPL_FAT_LOAD_KERNEL_NAME
+ Filename to read to load kernel uImage when reading
+ from FAT (for Falcon mode)
+
+ CONFIG_SPL_FAT_LOAD_ARGS_NAME
+ Filename to read to load kernel argument parameters
+ when reading from FAT (for Falcon mode)
+
CONFIG_SPL_MPC83XX_WAIT_FOR_NAND
Set this for NAND SPL on PPC mpc83xx targets, so that
start.S waits for the rest of the SPL to load before
@@ -3345,6 +3383,10 @@
offset _bss_start_ofs from CONFIG_SYS_TEXT_BASE, rather than
directly. You should not need to touch this setting.
+- CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC (OMAP only)
+ This is set by OMAP boards for the max time that reset should
+ be asserted. See doc/README.omap-reset-time for details on how
+ the value can be calulated on a given board.
The following definitions that deal with the placement and management
of environment data (variable area); in general, we support the
@@ -3859,6 +3901,9 @@
a second time. Useful for platforms that are pre-booted
by coreboot or similar.
+- CONFIG_PCI_INDIRECT_BRIDGE:
+ Enable support for indirect PCI bridges.
+
- CONFIG_SYS_SRIO:
Chip has SRIO or not
@@ -5063,7 +5108,7 @@
using the "bootz" command. The syntax of "bootz" command is the same
as the syntax of "bootm" command.
-Note, defining the CONFIG_SUPPORT_INITRD_RAW allows user to supply
+Note, defining the CONFIG_SUPPORT_RAW_INITRD allows user to supply
kernel with raw initrd images. The syntax is slightly different, the
address of the initrd must be augmented by it's size, in the following
format: "<initrd addres>:<initrd size>".
diff --git a/arch/arm/config.mk b/arch/arm/config.mk
index 461899e..dc64160 100644
--- a/arch/arm/config.mk
+++ b/arch/arm/config.mk
@@ -31,6 +31,9 @@
endif
endif
+LDFLAGS_FINAL += --gc-sections
+PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections
+
# Support generic board on ARM
__HAVE_ARCH_GENERIC_BOARD := y
diff --git a/arch/arm/cpu/arm1136/mx35/Makefile b/arch/arm/cpu/arm1136/mx35/Makefile
index f4ababb..23adac0 100644
--- a/arch/arm/cpu/arm1136/mx35/Makefile
+++ b/arch/arm/cpu/arm1136/mx35/Makefile
@@ -29,7 +29,6 @@
COBJS += generic.o
COBJS += timer.o
-COBJS += iomux.o
COBJS += mx35_sdram.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/arch/arm/cpu/arm1136/mx35/iomux.c b/arch/arm/cpu/arm1136/mx35/iomux.c
deleted file mode 100644
index a302575..0000000
--- a/arch/arm/cpu/arm1136/mx35/iomux.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/mx35_pins.h>
-#include <asm/arch/iomux.h>
-
-/*
- * IOMUX register (base) addresses
- */
-enum iomux_reg_addr {
- IOMUXGPR = IOMUXC_BASE_ADDR, /* General purpose */
- IOMUXSW_MUX_CTL = IOMUXC_BASE_ADDR + 4, /* MUX control */
- IOMUXSW_MUX_END = IOMUXC_BASE_ADDR + 0x324, /* last MUX control */
- IOMUXSW_PAD_CTL = IOMUXC_BASE_ADDR + 0x328, /* Pad control */
- IOMUXSW_PAD_END = IOMUXC_BASE_ADDR + 0x794, /* last Pad control */
- IOMUXSW_INPUT_CTL = IOMUXC_BASE_ADDR + 0x7AC, /* input select */
- IOMUXSW_INPUT_END = IOMUXC_BASE_ADDR + 0x9F4, /* last input select */
-};
-
-#define MUX_PIN_NUM_MAX \
- (((IOMUXSW_PAD_END - IOMUXSW_PAD_CTL) >> 2) + 1)
-#define MUX_INPUT_NUM_MUX \
- (((IOMUXSW_INPUT_END - IOMUXSW_INPUT_CTL) >> 2) + 1)
-
-/*
- * Request ownership for an IO pin. This function has to be the first one
- * being called before that pin is used.
- */
-void mxc_request_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t cfg)
-{
- u32 mux_reg = PIN_TO_IOMUX_MUX(pin);
-
- if (mux_reg != NON_MUX_I) {
- mux_reg += IOMUXGPR;
- writel(cfg, mux_reg);
- }
-}
-
-/*
- * Release ownership for an IO pin
- */
-void mxc_free_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t cfg)
-{
-}
-
-/*
- * This function configures the pad value for a IOMUX pin.
- *
- * @param pin a pin number as defined in iomux_pin_name_t
- * @param config the ORed value of elements defined in iomux_pad_config_t
- */
-void mxc_iomux_set_pad(iomux_pin_name_t pin, u32 config)
-{
- u32 pad_reg = IOMUXGPR + PIN_TO_IOMUX_PAD(pin);
-
- writel(config, pad_reg);
-}
-
-/*
- * This function enables/disables the general purpose function for a particular
- * signal.
- *
- * @param gp one signal as defined in iomux_gp_func_t
- * @param en enable/disable
- */
-void mxc_iomux_set_gpr(iomux_gp_func_t gp, int en)
-{
- u32 l;
-
- l = readl(IOMUXGPR);
- if (en)
- l |= gp;
- else
- l &= ~gp;
-
- writel(l, IOMUXGPR);
-}
-
-/*
- * This function configures input path.
- *
- * @param input index of input select register as defined in
- * iomux_input_select_t
- * @param config the binary value of elements defined in
- * iomux_input_config_t
- */
-void mxc_iomux_set_input(iomux_input_select_t input, u32 config)
-{
- u32 reg = IOMUXSW_INPUT_CTL + (input << 2);
-
- writel(config, reg);
-}
diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S
index ccea2d5..a7e0c28 100644
--- a/arch/arm/cpu/arm1136/start.S
+++ b/arch/arm/cpu/arm1136/start.S
@@ -104,10 +104,6 @@
_bss_start_ofs:
.word __bss_start - _start
-.globl _image_copy_end_ofs
-_image_copy_end_ofs:
- .word __image_copy_end - _start
-
.globl _bss_end_ofs
_bss_end_ofs:
.word __bss_end - _start
@@ -146,24 +142,6 @@
orr r0,r0,#0xd3
msr cpsr,r0
-#ifdef CONFIG_OMAP2420H4
- /* Copy vectors to mask ROM indirect addr */
- adr r0, _start /* r0 <- current position of code */
- add r0, r0, #4 /* skip reset vector */
- mov r2, #64 /* r2 <- size to copy */
- add r2, r0, r2 /* r2 <- source end address */
- mov r1, #SRAM_OFFSET0 /* build vect addr */
- mov r3, #SRAM_OFFSET1
- add r1, r1, r3
- mov r3, #SRAM_OFFSET2
- add r1, r1, r3
-next:
- ldmia r0!, {r3-r10} /* copy from source address [r0] */
- stmia r1!, {r3-r10} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- bne next /* loop until equal */
- bl cpy_clk_code /* put dpll adjust code behind vectors */
-#endif
/* the mask ROM code should have PLL and others stable */
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
bl cpu_init_crit
@@ -173,83 +151,6 @@
/*------------------------------------------------------------------------------*/
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- bx lr
-
-#ifndef CONFIG_SPL_BUILD
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
-#endif
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S
index f20da8e..65292bc 100644
--- a/arch/arm/cpu/arm1176/start.S
+++ b/arch/arm/cpu/arm1176/start.S
@@ -112,10 +112,6 @@
_bss_start_ofs:
.word __bss_start - _start
-.globl _image_copy_end_ofs
-_image_copy_end_ofs:
- .word __image_copy_end - _start
-
.globl _bss_end_ofs
_bss_end_ofs:
.word __bss_end - _start
@@ -225,79 +221,6 @@
/*------------------------------------------------------------------------------*/
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- bx lr
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S
index 9facc7e..a396ebc 100644
--- a/arch/arm/cpu/arm720t/start.S
+++ b/arch/arm/cpu/arm720t/start.S
@@ -101,10 +101,6 @@
_bss_start_ofs:
.word __bss_start - _start
-.globl _image_copy_end_ofs
-_image_copy_end_ofs:
- .word __image_copy_end - _start
-
.globl _bss_end_ofs
_bss_end_ofs:
.word __bss_end - _start
@@ -155,79 +151,6 @@
/*------------------------------------------------------------------------------*/
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- mov pc, lr
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
@@ -244,9 +167,9 @@
*************************************************************************
*/
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
cpu_init_crit:
-#if !defined(CONFIG_TEGRA)
mov ip, lr
/*
* before relocating, we have to setup RAM timing
@@ -255,9 +178,9 @@
*/
bl lowlevel_init
mov lr, ip
-#endif
mov pc, lr
+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
#ifndef CONFIG_SPL_BUILD
diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S
index 6250025..3232065 100644
--- a/arch/arm/cpu/arm920t/start.S
+++ b/arch/arm/cpu/arm920t/start.S
@@ -89,10 +89,6 @@
_bss_start_ofs:
.word __bss_start - _start
-.globl _image_copy_end_ofs
-_image_copy_end_ofs:
- .word __image_copy_end - _start
-
.globl _bss_end_ofs
_bss_end_ofs:
.word __bss_end - _start
@@ -194,79 +190,6 @@
/*------------------------------------------------------------------------------*/
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- mov pc, lr
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
diff --git a/arch/arm/cpu/arm925t/start.S b/arch/arm/cpu/arm925t/start.S
index 021e241..97eb276 100644
--- a/arch/arm/cpu/arm925t/start.S
+++ b/arch/arm/cpu/arm925t/start.S
@@ -95,10 +95,6 @@
_bss_start_ofs:
.word __bss_start - _start
-.globl _image_copy_end_ofs
-_image_copy_end_ofs:
- .word __image_copy_end - _start
-
.globl _bss_end_ofs
_bss_end_ofs:
.word __bss_end - _start
@@ -184,79 +180,6 @@
/*------------------------------------------------------------------------------*/
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- mov pc, lr
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
diff --git a/arch/arm/cpu/arm926ejs/at91/Makefile b/arch/arm/cpu/arm926ejs/at91/Makefile
index 346e58f..c4408f6 100644
--- a/arch/arm/cpu/arm926ejs/at91/Makefile
+++ b/arch/arm/cpu/arm926ejs/at91/Makefile
@@ -35,6 +35,7 @@
COBJS-$(CONFIG_AT91SAM9RL) += at91sam9rl_devices.o
COBJS-$(CONFIG_AT91SAM9M10G45) += at91sam9m10g45_devices.o
COBJS-$(CONFIG_AT91SAM9G45) += at91sam9m10g45_devices.o
+COBJS-$(CONFIG_AT91SAM9N12) += at91sam9n12_devices.o
COBJS-$(CONFIG_AT91SAM9X5) += at91sam9x5_devices.o
COBJS-$(CONFIG_AT91_EFLASH) += eflash.o
COBJS-$(CONFIG_AT91_LED) += led.o
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
index 19ec615..5e995e1 100644
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
@@ -203,6 +203,10 @@
#if defined(CONFIG_GENERIC_ATMEL_MCI)
void at91_mci_hw_init(void)
{
+ /* Enable mci clock */
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+ writel(1 << ATMEL_ID_MCI, &pmc->pcer);
+
at91_set_a_periph(AT91_PIO_PORTA, 8, 1); /* MCCK */
#if defined(CONFIG_ATMEL_MCI_PORTB)
at91_set_b_periph(AT91_PIO_PORTA, 1, 1); /* MCCDB */
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c
new file mode 100644
index 0000000..6eaeac0
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c
@@ -0,0 +1,177 @@
+/*
+ * (C) Copyright 2013 Atmel Corporation
+ * Josh Wu <josh.wu@atmel.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_pio.h>
+
+unsigned int has_lcdc()
+{
+ return 1;
+}
+
+void at91_serial0_hw_init(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ at91_set_a_periph(AT91_PIO_PORTA, 0, 1); /* TXD0 */
+ at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* RXD0 */
+ writel(1 << ATMEL_ID_USART0, &pmc->pcer);
+}
+
+void at91_serial1_hw_init(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ at91_set_a_periph(AT91_PIO_PORTA, 5, 1); /* TXD1 */
+ at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* RXD1 */
+ writel(1 << ATMEL_ID_USART1, &pmc->pcer);
+}
+
+void at91_serial2_hw_init(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ at91_set_a_periph(AT91_PIO_PORTA, 7, 1); /* TXD2 */
+ at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* RXD2 */
+ writel(1 << ATMEL_ID_USART2, &pmc->pcer);
+}
+
+void at91_serial3_hw_init(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ at91_set_b_periph(AT91_PIO_PORTC, 22, 1); /* TXD3 */
+ at91_set_b_periph(AT91_PIO_PORTC, 23, 0); /* RXD3 */
+ writel(1 << ATMEL_ID_USART3, &pmc->pcer);
+}
+
+void at91_seriald_hw_init(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */
+ at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */
+ writel(1 << ATMEL_ID_SYS, &pmc->pcer);
+}
+
+#ifdef CONFIG_ATMEL_SPI
+void at91_spi0_hw_init(unsigned long cs_mask)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* SPI0_MISO */
+ at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* SPI0_MOSI */
+ at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* SPI0_SPCK */
+
+ /* Enable clock */
+ writel(1 << ATMEL_ID_SPI0, &pmc->pcer);
+
+ if (cs_mask & (1 << 0))
+ at91_set_pio_output(AT91_PIO_PORTA, 14, 1);
+ if (cs_mask & (1 << 1))
+ at91_set_pio_output(AT91_PIO_PORTA, 7, 1);
+ if (cs_mask & (1 << 2))
+ at91_set_pio_output(AT91_PIO_PORTA, 1, 1);
+ if (cs_mask & (1 << 3))
+ at91_set_pio_output(AT91_PIO_PORTB, 3, 1);
+}
+
+void at91_spi1_hw_init(unsigned long cs_mask)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ at91_set_b_periph(AT91_PIO_PORTA, 21, 0); /* SPI1_MISO */
+ at91_set_b_periph(AT91_PIO_PORTA, 22, 0); /* SPI1_MOSI */
+ at91_set_b_periph(AT91_PIO_PORTA, 23, 0); /* SPI1_SPCK */
+
+ /* Enable clock */
+ writel(1 << ATMEL_ID_SPI1, &pmc->pcer);
+
+ if (cs_mask & (1 << 0))
+ at91_set_pio_output(AT91_PIO_PORTA, 8, 1);
+ if (cs_mask & (1 << 1))
+ at91_set_pio_output(AT91_PIO_PORTA, 0, 1);
+ if (cs_mask & (1 << 2))
+ at91_set_pio_output(AT91_PIO_PORTA, 31, 1);
+ if (cs_mask & (1 << 3))
+ at91_set_pio_output(AT91_PIO_PORTA, 30, 1);
+}
+#endif
+
+void at91_mci_hw_init(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* MCCK */
+ at91_set_a_periph(AT91_PIO_PORTA, 16, 0); /* MCCDA */
+ at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* MCDA0 */
+ at91_set_a_periph(AT91_PIO_PORTA, 18, 0); /* MCDA1 */
+ at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* MCDA2 */
+ at91_set_a_periph(AT91_PIO_PORTA, 20, 0); /* MCDA3 */
+
+ writel(1 << ATMEL_ID_HSMCI0, &pmc->pcer);
+}
+
+#ifdef CONFIG_LCD
+void at91_lcd_hw_init(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDPWR */
+ at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDVSYNC */
+ at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDHSYNC */
+ at91_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDDOTCK */
+ at91_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDEN */
+ at91_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDDOTCK */
+
+ at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDD0 */
+ at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDD1 */
+ at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDD2 */
+ at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDD3 */
+ at91_set_a_periph(AT91_PIO_PORTC, 4, 0); /* LCDD4 */
+ at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* LCDD5 */
+ at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD6 */
+ at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD7 */
+ at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD8 */
+ at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD9 */
+ at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD10 */
+ at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD11 */
+ at91_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDD12 */
+ at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDD13 */
+ at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD14 */
+ at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD15 */
+ at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD16 */
+ at91_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDD17 */
+ at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD18 */
+ at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD19 */
+ at91_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDD20 */
+ at91_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDD21 */
+ at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD22 */
+ at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD23 */
+
+ writel(1 << ATMEL_ID_LCDC, &pmc->pcer);
+}
+#endif
diff --git a/arch/arm/cpu/arm926ejs/at91/clock.c b/arch/arm/cpu/arm926ejs/at91/clock.c
index f825388..5b4923f 100644
--- a/arch/arm/cpu/arm926ejs/at91/clock.c
+++ b/arch/arm/cpu/arm926ejs/at91/clock.c
@@ -156,7 +156,7 @@
*/
mckr = readl(&pmc->mckr);
#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \
- || defined(CONFIG_AT91SAM9X5)
+ || defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5)
/* plla divisor by 2 */
gd->arch.plla_rate_hz /= (1 << ((mckr & 1 << 12) >> 12));
#endif
@@ -171,7 +171,7 @@
if (mckr & AT91_PMC_MCKR_MDIV_MASK)
freq /= 2; /* processor clock division */
#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \
- || defined(CONFIG_AT91SAM9X5)
+ || defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5)
/* mdiv <==> divisor
* 0 <==> 1
* 1 <==> 2
diff --git a/arch/arm/cpu/arm926ejs/davinci/Makefile b/arch/arm/cpu/arm926ejs/davinci/Makefile
index dec7bfb..bba4671 100644
--- a/arch/arm/cpu/arm926ejs/davinci/Makefile
+++ b/arch/arm/cpu/arm926ejs/davinci/Makefile
@@ -33,6 +33,7 @@
COBJS-$(CONFIG_SOC_DM365) += dm365.o
COBJS-$(CONFIG_SOC_DM644X) += dm644x.o
COBJS-$(CONFIG_SOC_DM646X) += dm646x.o
+COBJS-$(CONFIG_SOC_DA830) += da830_pinmux.o
COBJS-$(CONFIG_SOC_DA850) += da850_pinmux.o
COBJS-$(CONFIG_DRIVER_TI_EMAC) += lxt972.o dp83848.o et1011c.o ksz8873.o
diff --git a/arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c b/arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c
new file mode 100644
index 0000000..d0c964a
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c
@@ -0,0 +1,151 @@
+/*
+ * Pinmux configurations for the DA830 SoCs
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <asm/arch/davinci_misc.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/pinmux_defs.h>
+
+/* SPI0 pin muxer settings */
+const struct pinmux_config spi0_pins_base[] = {
+ { pinmux(7), 1, 3 }, /* SPI0_SOMI */
+ { pinmux(7), 1, 4 }, /* SPI0_SIMO */
+ { pinmux(7), 1, 6 } /* SPI0_CLK */
+};
+
+const struct pinmux_config spi0_pins_scs0[] = {
+ { pinmux(7), 1, 7 } /* SPI0_SCS[0] */
+};
+
+const struct pinmux_config spi0_pins_ena[] = {
+ { pinmux(7), 1, 5 } /* SPI0_ENA */
+};
+
+/* NAND pin muxer settings */
+const struct pinmux_config emifa_pins_cs0[] = {
+ { pinmux(18), 1, 2 } /* EMA_CS[0] */
+};
+
+const struct pinmux_config emifa_pins_cs2[] = {
+ { pinmux(18), 1, 3 } /* EMA_CS[2] */
+};
+
+const struct pinmux_config emifa_pins_cs3[] = {
+ { pinmux(18), 1, 4 } /* EMA_CS[3] */
+};
+
+#ifdef CONFIG_USE_NAND
+const struct pinmux_config emifa_pins[] = {
+ { pinmux(13), 1, 6 }, /* EMA_D[0] */
+ { pinmux(13), 1, 7 }, /* EMA_D[1] */
+ { pinmux(14), 1, 0 }, /* EMA_D[2] */
+ { pinmux(14), 1, 1 }, /* EMA_D[3] */
+ { pinmux(14), 1, 2 }, /* EMA_D[4] */
+ { pinmux(14), 1, 3 }, /* EMA_D[5] */
+ { pinmux(14), 1, 4 }, /* EMA_D[6] */
+ { pinmux(14), 1, 5 }, /* EMA_D[7] */
+ { pinmux(14), 1, 6 }, /* EMA_D[8] */
+ { pinmux(14), 1, 7 }, /* EMA_D[9] */
+ { pinmux(15), 1, 0 }, /* EMA_D[10] */
+ { pinmux(15), 1, 1 }, /* EMA_D[11] */
+ { pinmux(15), 1, 2 }, /* EMA_D[12] */
+ { pinmux(15), 1, 3 }, /* EMA_D[13] */
+ { pinmux(15), 1, 4 }, /* EMA_D[14] */
+ { pinmux(15), 1, 5 }, /* EMA_D[15] */
+ { pinmux(15), 1, 6 }, /* EMA_A[0] */
+ { pinmux(15), 1, 7 }, /* EMA_A[1] */
+ { pinmux(16), 1, 0 }, /* EMA_A[2] */
+ { pinmux(16), 1, 1 }, /* EMA_A[3] */
+ { pinmux(16), 1, 2 }, /* EMA_A[4] */
+ { pinmux(16), 1, 3 }, /* EMA_A[5] */
+ { pinmux(16), 1, 4 }, /* EMA_A[6] */
+ { pinmux(16), 1, 5 }, /* EMA_A[7] */
+ { pinmux(16), 1, 6 }, /* EMA_A[8] */
+ { pinmux(16), 1, 7 }, /* EMA_A[9] */
+ { pinmux(17), 1, 0 }, /* EMA_A[10] */
+ { pinmux(17), 1, 1 }, /* EMA_A[11] */
+ { pinmux(17), 1, 2 }, /* EMA_A[12] */
+ { pinmux(17), 1, 3 }, /* EMA_BA[1] */
+ { pinmux(17), 1, 4 }, /* EMA_BA[0] */
+ { pinmux(17), 1, 5 }, /* EMA_CLK */
+ { pinmux(17), 1, 6 }, /* EMA_SDCKE */
+ { pinmux(17), 1, 7 }, /* EMA_CAS */
+ { pinmux(18), 1, 0 }, /* EMA_CAS */
+ { pinmux(18), 1, 1 }, /* EMA_WE */
+ { pinmux(18), 1, 5 }, /* EMA_OE */
+ { pinmux(18), 1, 6 }, /* EMA_WE_DQM[1] */
+ { pinmux(18), 1, 7 }, /* EMA_WE_DQM[0] */
+ { pinmux(10), 1, 0 } /* Tristate */
+};
+#endif
+
+/* EMAC PHY interface pins */
+const struct pinmux_config emac_pins_rmii[] = {
+ { pinmux(10), 2, 1 }, /* RMII_TXD[0] */
+ { pinmux(10), 2, 2 }, /* RMII_TXD[1] */
+ { pinmux(10), 2, 3 }, /* RMII_TXEN */
+ { pinmux(10), 2, 4 }, /* RMII_CRS_DV */
+ { pinmux(10), 2, 5 }, /* RMII_RXD[0] */
+ { pinmux(10), 2, 6 }, /* RMII_RXD[1] */
+ { pinmux(10), 2, 7 } /* RMII_RXER */
+};
+
+const struct pinmux_config emac_pins_mdio[] = {
+ { pinmux(11), 2, 0 }, /* MDIO_CLK */
+ { pinmux(11), 2, 1 } /* MDIO_D */
+};
+
+const struct pinmux_config emac_pins_rmii_clk_source[] = {
+ { pinmux(9), 0, 5 } /* ref.clk from external source */
+};
+
+/* UART2 pin muxer settings */
+const struct pinmux_config uart2_pins_txrx[] = {
+ { pinmux(8), 2, 7 }, /* UART2_RXD */
+ { pinmux(9), 2, 0 } /* UART2_TXD */
+};
+
+/* I2C0 pin muxer settings */
+const struct pinmux_config i2c0_pins[] = {
+ { pinmux(8), 2, 3 }, /* I2C0_SDA */
+ { pinmux(8), 2, 4 } /* I2C0_SCL */
+};
+
+/* USB0_DRVVBUS pin muxer settings */
+const struct pinmux_config usb_pins[] = {
+ { pinmux(9), 1, 1 } /* USB0_DRVVBUS */
+};
+
+#ifdef CONFIG_DAVINCI_MMC
+/* MMC0 pin muxer settings */
+const struct pinmux_config mmc0_pins_8bit[] = {
+ { pinmux(15), 2, 7 }, /* MMCSD0_CLK */
+ { pinmux(16), 2, 0 }, /* MMCSD0_CMD */
+ { pinmux(13), 2, 6 }, /* MMCSD0_DAT_0 */
+ { pinmux(13), 2, 7 }, /* MMCSD0_DAT_1 */
+ { pinmux(14), 2, 0 }, /* MMCSD0_DAT_2 */
+ { pinmux(14), 2, 1 }, /* MMCSD0_DAT_3 */
+ { pinmux(14), 2, 2 }, /* MMCSD0_DAT_4 */
+ { pinmux(14), 2, 3 }, /* MMCSD0_DAT_5 */
+ { pinmux(14), 2, 4 }, /* MMCSD0_DAT_6 */
+ { pinmux(14), 2, 5 } /* MMCSD0_DAT_7 */
+ /* DA830 supports 8-bit mode */
+};
+#endif
diff --git a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
index ff2e2e3..127beb8 100644
--- a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
+++ b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
@@ -32,6 +32,14 @@
#include <asm/arch/emif_defs.h>
#include <asm/arch/pll_defs.h>
+void davinci_enable_uart0(void)
+{
+ lpsc_on(DAVINCI_LPSC_UART0);
+
+ /* Bringup UART0 out of reset */
+ REG(UART0_PWREMU_MGMT) = 0x00006001;
+}
+
#if defined(CONFIG_SYS_DA850_PLL_INIT)
void da850_waitloop(unsigned long loopcnt)
{
diff --git a/arch/arm/cpu/arm926ejs/mx25/generic.c b/arch/arm/cpu/arm926ejs/mx25/generic.c
index 679273b..7cbbe65 100644
--- a/arch/arm/cpu/arm926ejs/mx25/generic.c
+++ b/arch/arm/cpu/arm926ejs/mx25/generic.c
@@ -27,7 +27,6 @@
#include <netdev.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
-#include <asm/arch/imx25-pinmux.h>
#include <asm/arch/clock.h>
#ifdef CONFIG_FSL_ESDHC
@@ -248,123 +247,7 @@
}
#endif
-#ifdef CONFIG_MXC_UART
-void mx25_uart1_init_pins(void)
-{
- struct iomuxc_mux_ctl *muxctl;
- struct iomuxc_pad_ctl *padctl;
- u32 inpadctl;
- u32 outpadctl;
- u32 muxmode0;
-
- muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE;
- padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE;
- muxmode0 = MX25_PIN_MUX_MODE(0);
- /*
- * set up input pins with hysteresis and 100K pull-ups
- */
- inpadctl = MX25_PIN_PAD_CTL_HYS
- | MX25_PIN_PAD_CTL_PKE
- | MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_100K_PU;
-
- /*
- * set up output pins with 100K pull-downs
- * FIXME: need to revisit this
- * PUE is ignored if PKE is not set
- * so the right value here is likely
- * 0x0 for no pull up/down
- * or
- * 0xc0 for 100k pull down
- */
- outpadctl = MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_100K_PD;
-
- /* UART1 */
- /* rxd */
- writel(muxmode0, &muxctl->pad_uart1_rxd);
- writel(inpadctl, &padctl->pad_uart1_rxd);
-
- /* txd */
- writel(muxmode0, &muxctl->pad_uart1_txd);
- writel(outpadctl, &padctl->pad_uart1_txd);
-
- /* rts */
- writel(muxmode0, &muxctl->pad_uart1_rts);
- writel(outpadctl, &padctl->pad_uart1_rts);
-
- /* cts */
- writel(muxmode0, &muxctl->pad_uart1_cts);
- writel(inpadctl, &padctl->pad_uart1_cts);
-}
-#endif /* CONFIG_MXC_UART */
-
#ifdef CONFIG_FEC_MXC
-void mx25_fec_init_pins(void)
-{
- struct iomuxc_mux_ctl *muxctl;
- struct iomuxc_pad_ctl *padctl;
- u32 inpadctl_100kpd;
- u32 inpadctl_22kpu;
- u32 outpadctl;
- u32 muxmode0;
-
- muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE;
- padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE;
- muxmode0 = MX25_PIN_MUX_MODE(0);
- inpadctl_100kpd = MX25_PIN_PAD_CTL_HYS
- | MX25_PIN_PAD_CTL_PKE
- | MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_100K_PD;
- inpadctl_22kpu = MX25_PIN_PAD_CTL_HYS
- | MX25_PIN_PAD_CTL_PKE
- | MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_22K_PU;
- /*
- * set up output pins with 100K pull-downs
- * FIXME: need to revisit this
- * PUE is ignored if PKE is not set
- * so the right value here is likely
- * 0x0 for no pull
- * or
- * 0xc0 for 100k pull down
- */
- outpadctl = MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_100K_PD;
-
- /* FEC_TX_CLK */
- writel(muxmode0, &muxctl->pad_fec_tx_clk);
- writel(inpadctl_100kpd, &padctl->pad_fec_tx_clk);
-
- /* FEC_RX_DV */
- writel(muxmode0, &muxctl->pad_fec_rx_dv);
- writel(inpadctl_100kpd, &padctl->pad_fec_rx_dv);
-
- /* FEC_RDATA0 */
- writel(muxmode0, &muxctl->pad_fec_rdata0);
- writel(inpadctl_100kpd, &padctl->pad_fec_rdata0);
-
- /* FEC_TDATA0 */
- writel(muxmode0, &muxctl->pad_fec_tdata0);
- writel(outpadctl, &padctl->pad_fec_tdata0);
-
- /* FEC_TX_EN */
- writel(muxmode0, &muxctl->pad_fec_tx_en);
- writel(outpadctl, &padctl->pad_fec_tx_en);
-
- /* FEC_MDC */
- writel(muxmode0, &muxctl->pad_fec_mdc);
- writel(outpadctl, &padctl->pad_fec_mdc);
-
- /* FEC_MDIO */
- writel(muxmode0, &muxctl->pad_fec_mdio);
- writel(inpadctl_22kpu, &padctl->pad_fec_mdio);
-
- /* FEC_RDATA1 */
- writel(muxmode0, &muxctl->pad_fec_rdata1);
- writel(inpadctl_100kpd, &padctl->pad_fec_rdata1);
-
- /* FEC_TDATA1 */
- writel(muxmode0, &muxctl->pad_fec_tdata1);
- writel(outpadctl, &padctl->pad_fec_tdata1);
-
-}
-
void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
{
int i;
diff --git a/arch/arm/cpu/arm926ejs/mxs/Makefile b/arch/arm/cpu/arm926ejs/mxs/Makefile
index eeecf89..038c1c1 100644
--- a/arch/arm/cpu/arm926ejs/mxs/Makefile
+++ b/arch/arm/cpu/arm926ejs/mxs/Makefile
@@ -40,6 +40,16 @@
$(LIB): $(OBJS)
$(call cmd_link_o_target, $(OBJS))
+# Specify the target for use in elftosb call
+ELFTOSB_TARGET-$(CONFIG_MX23) = imx23
+ELFTOSB_TARGET-$(CONFIG_MX28) = imx28
+
+$(OBJTREE)/u-boot.bd: $(SRCTREE)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd
+ sed "s@OBJTREE@$(OBJTREE)@g" $^ > $@
+
+$(OBJTREE)/u-boot.sb: $(OBJTREE)/u-boot.bin $(OBJTREE)/spl/u-boot-spl.bin $(OBJTREE)/u-boot.bd
+ elftosb -zf $(ELFTOSB_TARGET-y) -c $(OBJTREE)/u-boot.bd -o $(OBJTREE)/u-boot.sb
+
#########################################################################
# defines $(obj).depend target
diff --git a/arch/arm/cpu/arm926ejs/mxs/clock.c b/arch/arm/cpu/arm926ejs/mxs/clock.c
index 43e7663..f94107f 100644
--- a/arch/arm/cpu/arm926ejs/mxs/clock.c
+++ b/arch/arm/cpu/arm926ejs/mxs/clock.c
@@ -325,6 +325,99 @@
bus, tgtclk, freq);
}
+void mxs_set_lcdclk(uint32_t freq)
+{
+ struct mxs_clkctrl_regs *clkctrl_regs =
+ (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
+ uint32_t fp, x, k_rest, k_best, x_best, tk;
+ int32_t k_best_l = 999, k_best_t = 0, x_best_l = 0xff, x_best_t = 0xff;
+
+ if (freq == 0)
+ return;
+
+#if defined(CONFIG_MX23)
+ writel(CLKCTRL_CLKSEQ_BYPASS_PIX, &clkctrl_regs->hw_clkctrl_clkseq_clr);
+#elif defined(CONFIG_MX28)
+ writel(CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF, &clkctrl_regs->hw_clkctrl_clkseq_clr);
+#endif
+
+ /*
+ * / 18 \ 1 1
+ * freq kHz = | 480000000 Hz * -- | * --- * ------
+ * \ x / k 1000
+ *
+ * 480000000 Hz 18
+ * ------------ * --
+ * freq kHz x
+ * k = -------------------
+ * 1000
+ */
+
+ fp = ((PLL_FREQ_KHZ * 1000) / freq) * 18;
+
+ for (x = 18; x <= 35; x++) {
+ tk = fp / x;
+ if ((tk / 1000 == 0) || (tk / 1000 > 255))
+ continue;
+
+ k_rest = tk % 1000;
+
+ if (k_rest < (k_best_l % 1000)) {
+ k_best_l = tk;
+ x_best_l = x;
+ }
+
+ if (k_rest > (k_best_t % 1000)) {
+ k_best_t = tk;
+ x_best_t = x;
+ }
+ }
+
+ if (1000 - (k_best_t % 1000) > (k_best_l % 1000)) {
+ k_best = k_best_l;
+ x_best = x_best_l;
+ } else {
+ k_best = k_best_t;
+ x_best = x_best_t;
+ }
+
+ k_best /= 1000;
+
+#if defined(CONFIG_MX23)
+ writeb(CLKCTRL_FRAC_CLKGATE,
+ &clkctrl_regs->hw_clkctrl_frac0_set[CLKCTRL_FRAC0_PIX]);
+ writeb(CLKCTRL_FRAC_CLKGATE | (x_best & CLKCTRL_FRAC_FRAC_MASK),
+ &clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_PIX]);
+ writeb(CLKCTRL_FRAC_CLKGATE,
+ &clkctrl_regs->hw_clkctrl_frac0_clr[CLKCTRL_FRAC0_PIX]);
+
+ writel(CLKCTRL_PIX_CLKGATE,
+ &clkctrl_regs->hw_clkctrl_pix_set);
+ clrsetbits_le32(&clkctrl_regs->hw_clkctrl_pix,
+ CLKCTRL_PIX_DIV_MASK | CLKCTRL_PIX_CLKGATE,
+ k_best << CLKCTRL_PIX_DIV_OFFSET);
+
+ while (readl(&clkctrl_regs->hw_clkctrl_pix) & CLKCTRL_PIX_BUSY)
+ ;
+#elif defined(CONFIG_MX28)
+ writeb(CLKCTRL_FRAC_CLKGATE,
+ &clkctrl_regs->hw_clkctrl_frac1_set[CLKCTRL_FRAC1_PIX]);
+ writeb(CLKCTRL_FRAC_CLKGATE | (x_best & CLKCTRL_FRAC_FRAC_MASK),
+ &clkctrl_regs->hw_clkctrl_frac1[CLKCTRL_FRAC1_PIX]);
+ writeb(CLKCTRL_FRAC_CLKGATE,
+ &clkctrl_regs->hw_clkctrl_frac1_clr[CLKCTRL_FRAC1_PIX]);
+
+ writel(CLKCTRL_DIS_LCDIF_CLKGATE,
+ &clkctrl_regs->hw_clkctrl_lcdif_set);
+ clrsetbits_le32(&clkctrl_regs->hw_clkctrl_lcdif,
+ CLKCTRL_DIS_LCDIF_DIV_MASK | CLKCTRL_DIS_LCDIF_CLKGATE,
+ k_best << CLKCTRL_DIS_LCDIF_DIV_OFFSET);
+
+ while (readl(&clkctrl_regs->hw_clkctrl_lcdif) & CLKCTRL_DIS_LCDIF_BUSY)
+ ;
+#endif
+}
+
uint32_t mxc_get_clock(enum mxc_clock clk)
{
switch (clk) {
diff --git a/arch/arm/cpu/arm926ejs/mxs/mxs.c b/arch/arm/cpu/arm926ejs/mxs/mxs.c
index e2b4196..45667bd 100644
--- a/arch/arm/cpu/arm926ejs/mxs/mxs.c
+++ b/arch/arm/cpu/arm926ejs/mxs/mxs.c
@@ -30,7 +30,7 @@
#include <asm/errno.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
-#include <asm/arch/dma.h>
+#include <asm/imx-common/dma.h>
#include <asm/arch/gpio.h>
#include <asm/arch/iomux.h>
#include <asm/arch/imx-regs.h>
@@ -39,12 +39,6 @@
DECLARE_GLOBAL_DATA_PTR;
-/* 1 second delay should be plenty of time for block reset. */
-#define RESET_MAX_TIMEOUT 1000000
-
-#define MXS_BLOCK_SFTRST (1 << 31)
-#define MXS_BLOCK_CLKGATE (1 << 30)
-
/* Lowlevel init isn't used on i.MX28, so just have a dummy here */
inline void lowlevel_init(void) {}
@@ -82,70 +76,32 @@
#endif
}
-int mxs_wait_mask_set(struct mxs_register_32 *reg, uint32_t mask, unsigned
- int timeout)
-{
- while (--timeout) {
- if ((readl(®->reg) & mask) == mask)
- break;
- udelay(1);
- }
-
- return !timeout;
-}
-
-int mxs_wait_mask_clr(struct mxs_register_32 *reg, uint32_t mask, unsigned
- int timeout)
-{
- while (--timeout) {
- if ((readl(®->reg) & mask) == 0)
- break;
- udelay(1);
- }
-
- return !timeout;
-}
-
-int mxs_reset_block(struct mxs_register_32 *reg)
-{
- /* Clear SFTRST */
- writel(MXS_BLOCK_SFTRST, ®->reg_clr);
-
- if (mxs_wait_mask_clr(reg, MXS_BLOCK_SFTRST, RESET_MAX_TIMEOUT))
- return 1;
-
- /* Clear CLKGATE */
- writel(MXS_BLOCK_CLKGATE, ®->reg_clr);
-
- /* Set SFTRST */
- writel(MXS_BLOCK_SFTRST, ®->reg_set);
-
- /* Wait for CLKGATE being set */
- if (mxs_wait_mask_set(reg, MXS_BLOCK_CLKGATE, RESET_MAX_TIMEOUT))
- return 1;
-
- /* Clear SFTRST */
- writel(MXS_BLOCK_SFTRST, ®->reg_clr);
-
- if (mxs_wait_mask_clr(reg, MXS_BLOCK_SFTRST, RESET_MAX_TIMEOUT))
- return 1;
-
- /* Clear CLKGATE */
- writel(MXS_BLOCK_CLKGATE, ®->reg_clr);
-
- if (mxs_wait_mask_clr(reg, MXS_BLOCK_CLKGATE, RESET_MAX_TIMEOUT))
- return 1;
-
- return 0;
-}
-
+/*
+ * This function will craft a jumptable at 0x0 which will redirect interrupt
+ * vectoring to proper location of U-Boot in RAM.
+ *
+ * The structure of the jumptable will be as follows:
+ * ldr pc, [pc, #0x18] ..... for each vector, thus repeated 8 times
+ * <destination address> ... for each previous ldr, thus also repeated 8 times
+ *
+ * The "ldr pc, [pc, #0x18]" instruction above loads address from memory at
+ * offset 0x18 from current value of PC register. Note that PC is already
+ * incremented by 4 when computing the offset, so the effective offset is
+ * actually 0x20, this the associated <destination address>. Loading the PC
+ * register with an address performs a jump to that address.
+ */
void mx28_fixup_vt(uint32_t start_addr)
{
- uint32_t *vt = (uint32_t *)0x20;
+ /* ldr pc, [pc, #0x18] */
+ const uint32_t ldr_pc = 0xe59ff018;
+ /* Jumptable location is 0x0 */
+ uint32_t *vt = (uint32_t *)0x0;
int i;
- for (i = 0; i < 8; i++)
- vt[i] = start_addr + (4 * i);
+ for (i = 0; i < 8; i++) {
+ vt[i] = ldr_pc;
+ vt[i + 8] = start_addr + (4 * i);
+ }
}
#ifdef CONFIG_ARCH_MISC_INIT
diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
index bc2d69c..07db279 100644
--- a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
+++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
@@ -110,6 +110,7 @@
{
}
+#ifdef CONFIG_MX28
static void initialize_dram_values(void)
{
int i;
@@ -118,15 +119,36 @@
for (i = 0; i < ARRAY_SIZE(dram_vals); i++)
writel(dram_vals[i], MXS_DRAM_BASE + (4 * i));
+}
+#else
+static void initialize_dram_values(void)
+{
+ int i;
-#ifdef CONFIG_MX23
+ mxs_adjust_memory_params(dram_vals);
+
+ /*
+ * HW_DRAM_CTL27, HW_DRAM_CTL28 and HW_DRAM_CTL35 are not initialized as
+ * per FSL bootlets code.
+ *
+ * mx23 Reference Manual marks HW_DRAM_CTL27 and HW_DRAM_CTL28 as
+ * "reserved".
+ * HW_DRAM_CTL8 is setup as the last element.
+ * So skip the initialization of these HW_DRAM_CTL registers.
+ */
+ for (i = 0; i < ARRAY_SIZE(dram_vals); i++) {
+ if (i == 8 || i == 27 || i == 28 || i == 35)
+ continue;
+ writel(dram_vals[i], MXS_DRAM_BASE + (4 * i));
+ }
+
/*
* Enable tRAS lockout in HW_DRAM_CTL08 ; it must be the last
* element to be set
*/
writel((1 << 24), MXS_DRAM_BASE + (4 * 8));
-#endif
}
+#endif
static void mxs_mem_init_clock(void)
{
@@ -234,17 +256,9 @@
struct mxs_power_regs *power_regs =
(struct mxs_power_regs *)MXS_POWER_BASE;
- writel((0x10 << POWER_VDDMEMCTRL_TRG_OFFSET) |
- POWER_VDDMEMCTRL_ENABLE_ILIMIT |
- POWER_VDDMEMCTRL_ENABLE_LINREG |
- POWER_VDDMEMCTRL_PULLDOWN_ACTIVE,
- &power_regs->hw_power_vddmemctrl);
+ clrbits_le32(&power_regs->hw_power_vddmemctrl,
+ POWER_VDDMEMCTRL_ENABLE_ILIMIT);
- early_delay(10000);
-
- writel((0x10 << POWER_VDDMEMCTRL_TRG_OFFSET) |
- POWER_VDDMEMCTRL_ENABLE_LINREG,
- &power_regs->hw_power_vddmemctrl);
}
static void mx23_mem_init(void)
@@ -267,22 +281,18 @@
initialize_dram_values();
- /* Set START bit in DRAM_CTL16 */
+ /* Set START bit in DRAM_CTL8 */
setbits_le32(MXS_DRAM_BASE + 0x20, 1 << 16);
clrbits_le32(MXS_DRAM_BASE + 0x40, 1 << 17);
early_delay(20000);
/* Adjust EMI port priority. */
- clrsetbits_le32(0x80020000, 0x1f << 16, 0x8);
+ clrsetbits_le32(0x80020000, 0x1f << 16, 0x2);
early_delay(20000);
setbits_le32(MXS_DRAM_BASE + 0x40, 1 << 19);
setbits_le32(MXS_DRAM_BASE + 0x40, 1 << 11);
-
- /* Wait for bit 10 (DRAM init complete) in DRAM_CTL18 */
- while (!(readl(MXS_DRAM_BASE + 0x48) & (1 << 10)))
- ;
}
#endif
diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c
index 287c698..21cac7b 100644
--- a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c
+++ b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c
@@ -687,6 +687,12 @@
mxs_init_batt_bo();
mxs_switch_vddd_to_dcdc_source();
+
+#ifdef CONFIG_MX23
+ /* Fire up the VDDMEM LinReg now that we're all set. */
+ writel(POWER_VDDMEMCTRL_ENABLE_LINREG | POWER_VDDMEMCTRL_ENABLE_ILIMIT,
+ &power_regs->hw_power_vddmemctrl);
+#endif
}
static void mxs_enable_output_rail_protection(void)
@@ -781,7 +787,11 @@
static const struct mxs_vddx_cfg mxs_vddio_cfg = {
.reg = &(((struct mxs_power_regs *)MXS_POWER_BASE)->
hw_power_vddioctrl),
+#if defined(CONFIG_MX23)
+ .step_mV = 25,
+#else
.step_mV = 50,
+#endif
.lowest_mV = 2800,
.powered_by_linreg = mxs_get_vddio_power_source_off,
.trg_mask = POWER_VDDIOCTRL_TRG_MASK,
@@ -804,6 +814,21 @@
.bo_offset_offset = POWER_VDDDCTRL_BO_OFFSET_OFFSET,
};
+#ifdef CONFIG_MX23
+static const struct mxs_vddx_cfg mxs_vddmem_cfg = {
+ .reg = &(((struct mxs_power_regs *)MXS_POWER_BASE)->
+ hw_power_vddmemctrl),
+ .step_mV = 50,
+ .lowest_mV = 1700,
+ .powered_by_linreg = NULL,
+ .trg_mask = POWER_VDDMEMCTRL_TRG_MASK,
+ .bo_irq = 0,
+ .bo_enirq = 0,
+ .bo_offset_mask = 0,
+ .bo_offset_offset = 0,
+};
+#endif
+
static void mxs_power_set_vddx(const struct mxs_vddx_cfg *cfg,
uint32_t new_target, uint32_t new_brownout)
{
@@ -821,9 +846,10 @@
cur_target += cfg->lowest_mV;
adjust_up = new_target > cur_target;
- powered_by_linreg = cfg->powered_by_linreg();
+ if (cfg->powered_by_linreg)
+ powered_by_linreg = cfg->powered_by_linreg();
- if (adjust_up) {
+ if (adjust_up && cfg->bo_irq) {
if (powered_by_linreg) {
bo_int = readl(cfg->reg);
clrbits_le32(cfg->reg, cfg->bo_enirq);
@@ -864,14 +890,16 @@
cur_target += cfg->lowest_mV;
} while (new_target > cur_target);
- if (adjust_up && powered_by_linreg) {
- writel(cfg->bo_irq, &power_regs->hw_power_ctrl_clr);
- if (bo_int & cfg->bo_enirq)
- setbits_le32(cfg->reg, cfg->bo_enirq);
- }
+ if (cfg->bo_irq) {
+ if (adjust_up && powered_by_linreg) {
+ writel(cfg->bo_irq, &power_regs->hw_power_ctrl_clr);
+ if (bo_int & cfg->bo_enirq)
+ setbits_le32(cfg->reg, cfg->bo_enirq);
+ }
- clrsetbits_le32(cfg->reg, cfg->bo_offset_mask,
- new_brownout << cfg->bo_offset_offset);
+ clrsetbits_le32(cfg->reg, cfg->bo_offset_mask,
+ new_brownout << cfg->bo_offset_offset);
+ }
}
static void mxs_setup_batt_detect(void)
@@ -910,7 +938,9 @@
mxs_power_set_vddx(&mxs_vddio_cfg, 3300, 3150);
mxs_power_set_vddx(&mxs_vddd_cfg, 1500, 1000);
-
+#ifdef CONFIG_MX23
+ mxs_power_set_vddx(&mxs_vddmem_cfg, 2500, 1700);
+#endif
writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ |
POWER_CTRL_VDDIO_BO_IRQ | POWER_CTRL_VDD5V_DROOP_IRQ |
POWER_CTRL_VBUS_VALID_IRQ | POWER_CTRL_BATT_BO_IRQ |
diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd b/arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd
index 3a51879..8b6c30e 100644
--- a/arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd
+++ b/arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd
@@ -4,8 +4,8 @@
}
sources {
- u_boot_spl="spl/u-boot-spl.bin";
- u_boot="u-boot.bin";
+ u_boot_spl="OBJTREE/spl/u-boot-spl.bin";
+ u_boot="OBJTREE/u-boot.bin";
}
section (0) {
diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd b/arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd
index c60615a..a5fa648 100644
--- a/arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd
+++ b/arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd
@@ -1,6 +1,6 @@
sources {
- u_boot_spl="spl/u-boot-spl.bin";
- u_boot="u-boot.bin";
+ u_boot_spl="OBJTREE/spl/u-boot-spl.bin";
+ u_boot="OBJTREE/u-boot.bin";
}
section (0) {
diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S
index 4c56711..5fc8e04 100644
--- a/arch/arm/cpu/arm926ejs/start.S
+++ b/arch/arm/cpu/arm926ejs/start.S
@@ -136,10 +136,6 @@
_bss_start_ofs:
.word __bss_start - _start
-.globl _image_copy_end_ofs
-_image_copy_end_ofs:
- .word __image_copy_end - _start
-
.globl _bss_end_ofs
_bss_end_ofs:
.word __bss_end - _start
@@ -190,83 +186,6 @@
/*------------------------------------------------------------------------------*/
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- bx lr
-
-#ifndef CONFIG_SPL_BUILD
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
-#endif
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S
index 9c2b70d..e9d0c34 100644
--- a/arch/arm/cpu/arm946es/start.S
+++ b/arch/arm/cpu/arm946es/start.S
@@ -105,10 +105,6 @@
_bss_start_ofs:
.word __bss_start - _start
-.globl _image_copy_end_ofs
-_image_copy_end_ofs:
- .word __image_copy_end - _start
-
.globl _bss_end_ofs
_bss_end_ofs:
.word __bss_end - _start
@@ -159,79 +155,6 @@
/*------------------------------------------------------------------------------*/
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- mov pc, lr
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S
index 5e8c528..8dfd919 100644
--- a/arch/arm/cpu/arm_intcm/start.S
+++ b/arch/arm/cpu/arm_intcm/start.S
@@ -101,10 +101,6 @@
_bss_start_ofs:
.word __bss_start - _start
-.globl _image_copy_end_ofs
-_image_copy_end_ofs:
- .word __image_copy_end - _start
-
.globl _bss_end_ofs
_bss_end_ofs:
.word __bss_end - _start
@@ -155,79 +151,6 @@
/*------------------------------------------------------------------------------*/
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- bx lr
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
diff --git a/arch/arm/cpu/armv7/am33xx/clock_ti814x.c b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c
index cb4210f..8b2878d 100644
--- a/arch/arm/cpu/armv7/am33xx/clock_ti814x.c
+++ b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c
@@ -109,6 +109,8 @@
#define OSC_SRC_CTRL (PLL_SUBSYS_BASE + 0x2C0)
/* PRCM */
+#define ENET_CLKCTRL_CMPL 0x30000
+
#define CM_DEFAULT_BASE (PRCM_BASE + 0x0500)
struct cm_def {
@@ -183,7 +185,7 @@
unsigned int resv5[2];
unsigned int gpmcclkctrl;
unsigned int ethernet0clkctrl;
- unsigned int resv6[1];
+ unsigned int ethernet1clkctrl;
unsigned int mpuclkctrl;
unsigned int debugssclkctrl;
unsigned int l3clkctrl;
@@ -203,9 +205,67 @@
unsigned int custefuseclkctrl;
};
+#define SATA_PLL_BASE (CTRL_BASE + 0x0720)
+
+struct sata_pll {
+ unsigned int pllcfg0;
+ unsigned int pllcfg1;
+ unsigned int pllcfg2;
+ unsigned int pllcfg3;
+ unsigned int pllcfg4;
+ unsigned int pllstatus;
+ unsigned int rxstatus;
+ unsigned int txstatus;
+ unsigned int testcfg;
+};
+
+#define SEL_IN_FREQ (0x1 << 31)
+#define DIGCLRZ (0x1 << 30)
+#define ENDIGLDO (0x1 << 4)
+#define APLL_CP_CURR (0x1 << 3)
+#define ENBGSC_REF (0x1 << 2)
+#define ENPLLLDO (0x1 << 1)
+#define ENPLL (0x1 << 0)
+
+#define SATA_PLLCFG0_1 (SEL_IN_FREQ | ENBGSC_REF)
+#define SATA_PLLCFG0_2 (SEL_IN_FREQ | ENDIGLDO | ENBGSC_REF)
+#define SATA_PLLCFG0_3 (SEL_IN_FREQ | ENDIGLDO | ENBGSC_REF | ENPLLLDO)
+#define SATA_PLLCFG0_4 (SEL_IN_FREQ | DIGCLRZ | ENDIGLDO | ENBGSC_REF | \
+ ENPLLLDO | ENPLL)
+
+#define PLL_LOCK (0x1 << 0)
+
+#define ENSATAMODE (0x1 << 31)
+#define PLLREFSEL (0x1 << 30)
+#define MDIVINT (0x4b << 18)
+#define EN_CLKAUX (0x1 << 5)
+#define EN_CLK125M (0x1 << 4)
+#define EN_CLK100M (0x1 << 3)
+#define EN_CLK50M (0x1 << 2)
+
+#define SATA_PLLCFG1 (ENSATAMODE | \
+ PLLREFSEL | \
+ MDIVINT | \
+ EN_CLKAUX | \
+ EN_CLK125M | \
+ EN_CLK100M | \
+ EN_CLK50M)
+
+#define DIGLDO_EN_CAPLESSMODE (0x1 << 22)
+#define PLLDO_EN_LDO_STABLE (0x1 << 11)
+#define PLLDO_EN_BUF_CUR (0x1 << 7)
+#define PLLDO_EN_LP (0x1 << 6)
+#define PLLDO_CTRL_TRIM_1_4V (0x10 << 1)
+
+#define SATA_PLLCFG3 (DIGLDO_EN_CAPLESSMODE | \
+ PLLDO_EN_LDO_STABLE | \
+ PLLDO_EN_BUF_CUR | \
+ PLLDO_EN_LP | \
+ PLLDO_CTRL_TRIM_1_4V)
const struct cm_alwon *cmalwon = (struct cm_alwon *)CM_ALWON_BASE;
const struct cm_def *cmdef = (struct cm_def *)CM_DEFAULT_BASE;
+const struct sata_pll *spll = (struct sata_pll *)SATA_PLL_BASE;
/*
* Enable the peripheral clock for required peripherals
@@ -221,6 +281,15 @@
writel(PRCM_MOD_EN, &cmalwon->mmchs1clkctrl);
while (readl(&cmalwon->mmchs1clkctrl) != PRCM_MOD_EN)
;
+
+ /* Ethernet */
+ writel(PRCM_MOD_EN, &cmalwon->ethclkstctrl);
+ writel(PRCM_MOD_EN, &cmalwon->ethernet0clkctrl);
+ while ((readl(&cmalwon->ethernet0clkctrl) & ENET_CLKCTRL_CMPL) != 0)
+ ;
+ writel(PRCM_MOD_EN, &cmalwon->ethernet1clkctrl);
+ while ((readl(&cmalwon->ethernet1clkctrl) & ENET_CLKCTRL_CMPL) != 0)
+ ;
}
/*
@@ -365,6 +434,35 @@
pll_config(DDR_PLL_BASE, DDR_N, DDR_M, DDR_M2, DDR_CLKCTRL, 1);
}
+void sata_pll_config(void)
+{
+ /*
+ * This sequence for configuring the SATA PLL
+ * resident in the control module is documented
+ * in TI8148 TRM section 21.3.1
+ */
+ writel(SATA_PLLCFG1, &spll->pllcfg1);
+ udelay(50);
+
+ writel(SATA_PLLCFG3, &spll->pllcfg3);
+ udelay(50);
+
+ writel(SATA_PLLCFG0_1, &spll->pllcfg0);
+ udelay(50);
+
+ writel(SATA_PLLCFG0_2, &spll->pllcfg0);
+ udelay(50);
+
+ writel(SATA_PLLCFG0_3, &spll->pllcfg0);
+ udelay(50);
+
+ writel(SATA_PLLCFG0_4, &spll->pllcfg0);
+ udelay(50);
+
+ while (((readl(&spll->pllstatus) & PLL_LOCK) == 0))
+ ;
+}
+
void enable_emif_clocks(void) {};
void enable_dmm_clocks(void)
@@ -397,9 +495,10 @@
/* Enable the control module */
writel(PRCM_MOD_EN, &cmalwon->controlclkctrl);
+ /* Configure PLLs */
mpu_pll_config();
-
l3_pll_config();
+ sata_pll_config();
/* Enable the required peripherals */
enable_per_clocks();
diff --git a/arch/arm/cpu/armv7/am33xx/sys_info.c b/arch/arm/cpu/armv7/am33xx/sys_info.c
index 5fd8b47..ac049ac 100644
--- a/arch/arm/cpu/armv7/am33xx/sys_info.c
+++ b/arch/arm/cpu/armv7/am33xx/sys_info.c
@@ -92,7 +92,6 @@
int print_cpuinfo(void)
{
char *cpu_s, *sec_s;
- int arm_freq, ddr_freq;
switch (get_cpu_type()) {
case AM335X:
@@ -123,10 +122,7 @@
sec_s = "?";
}
- printf("%s-%s rev %d\n",
- cpu_s, sec_s, get_cpu_rev());
-
- /* TODO: Print ARM and DDR frequencies */
+ printf("%s-%s rev %d\n", cpu_s, sec_s, get_cpu_rev());
return 0;
}
diff --git a/board/ti/omap2420h4/Makefile b/arch/arm/cpu/armv7/at91/Makefile
similarity index 68%
copy from board/ti/omap2420h4/Makefile
copy to arch/arm/cpu/armv7/at91/Makefile
index cddd7e6..040c67d 100644
--- a/board/ti/omap2420h4/Makefile
+++ b/arch/arm/cpu/armv7/at91/Makefile
@@ -1,7 +1,10 @@
#
-# (C) Copyright 2000-2006
+# (C) Copyright 2000-2008
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
+# (C) Copyright 2013
+# Bo Shen <voice.shen@atmel.com>
+#
# See file CREDITS for list of people who contributed to this
# project.
#
@@ -12,7 +15,7 @@
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
@@ -23,17 +26,21 @@
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).o
+LIB = $(obj)lib$(SOC).o
-COBJS := omap2420h4.o mem.o sys_info.o
-SOBJS := lowlevel_init.o
+COBJS-$(CONFIG_SAMA5D3) += sama5d3_devices.o
+COBJS-y += clock.o
+COBJS-y += cpu.o
+COBJS-y += reset.o
+COBJS-y += timer.o
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
+SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
diff --git a/arch/arm/cpu/armv7/at91/clock.c b/arch/arm/cpu/armv7/at91/clock.c
new file mode 100644
index 0000000..624b52c
--- /dev/null
+++ b/arch/arm/cpu/armv7/at91/clock.c
@@ -0,0 +1,125 @@
+/*
+ * [origin: Linux kernel linux/arch/arm/mach-at91/clock.c]
+ *
+ * Copyright (C) 2005 David Brownell
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ * Copyright (C) 2013 Bo Shen <voice.shen@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/clk.h>
+
+#if !defined(CONFIG_AT91FAMILY)
+# error You need to define CONFIG_AT91FAMILY in your board config!
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static unsigned long at91_css_to_rate(unsigned long css)
+{
+ switch (css) {
+ case AT91_PMC_MCKR_CSS_SLOW:
+ return CONFIG_SYS_AT91_SLOW_CLOCK;
+ case AT91_PMC_MCKR_CSS_MAIN:
+ return gd->arch.main_clk_rate_hz;
+ case AT91_PMC_MCKR_CSS_PLLA:
+ return gd->arch.plla_rate_hz;
+ }
+
+ return 0;
+}
+
+static u32 at91_pll_rate(u32 freq, u32 reg)
+{
+ unsigned mul, div;
+
+ div = reg & 0xff;
+ mul = (reg >> 18) & 0x7f;
+ if (div && mul) {
+ freq /= div;
+ freq *= mul + 1;
+ } else {
+ freq = 0;
+ }
+
+ return freq;
+}
+
+int at91_clock_init(unsigned long main_clock)
+{
+ unsigned freq, mckr;
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+#ifndef CONFIG_SYS_AT91_MAIN_CLOCK
+ unsigned tmp;
+ /*
+ * When the bootloader initialized the main oscillator correctly,
+ * there's no problem using the cycle counter. But if it didn't,
+ * or when using oscillator bypass mode, we must be told the speed
+ * of the main clock.
+ */
+ if (!main_clock) {
+ do {
+ tmp = readl(&pmc->mcfr);
+ } while (!(tmp & AT91_PMC_MCFR_MAINRDY));
+ tmp &= AT91_PMC_MCFR_MAINF_MASK;
+ main_clock = tmp * (CONFIG_SYS_AT91_SLOW_CLOCK / 16);
+ }
+#endif
+ gd->arch.main_clk_rate_hz = main_clock;
+
+ /* report if PLLA is more than mildly overclocked */
+ gd->arch.plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar));
+
+ /*
+ * MCK and CPU derive from one of those primary clocks.
+ * For now, assume this parentage won't change.
+ */
+ mckr = readl(&pmc->mckr);
+
+ /* plla divisor by 2 */
+ if (mckr & (1 << 12))
+ gd->arch.plla_rate_hz >>= 1;
+
+ gd->arch.mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK);
+ freq = gd->arch.mck_rate_hz;
+
+ /* prescale */
+ freq >>= mckr & AT91_PMC_MCKR_PRES_MASK;
+
+ switch (mckr & AT91_PMC_MCKR_MDIV_MASK) {
+ case AT91_PMC_MCKR_MDIV_2:
+ gd->arch.mck_rate_hz = freq / 2;
+ break;
+ case AT91_PMC_MCKR_MDIV_3:
+ gd->arch.mck_rate_hz = freq / 3;
+ break;
+ case AT91_PMC_MCKR_MDIV_4:
+ gd->arch.mck_rate_hz = freq / 4;
+ break;
+ default:
+ break;
+ }
+
+ gd->arch.cpu_clk_rate_hz = freq;
+
+ return 0;
+}
+
+void at91_periph_clk_enable(int id)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ if (id > 31)
+ writel(1 << (id - 32), &pmc->pcer1);
+ else
+ writel(1 << id, &pmc->pcer);
+}
diff --git a/arch/arm/cpu/armv7/at91/cpu.c b/arch/arm/cpu/armv7/at91/cpu.c
new file mode 100644
index 0000000..3df6143
--- /dev/null
+++ b/arch/arm/cpu/armv7/at91/cpu.c
@@ -0,0 +1,90 @@
+/*
+ * (C) Copyright 2010
+ * Reinhard Meyer, reinhard.meyer@emk-elektronik.de
+ * (C) Copyright 2009
+ * Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ * (C) Copyright 2013
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_dbu.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_pit.h>
+#include <asm/arch/at91_gpbr.h>
+#include <asm/arch/clk.h>
+
+#ifndef CONFIG_SYS_AT91_MAIN_CLOCK
+#define CONFIG_SYS_AT91_MAIN_CLOCK 0
+#endif
+
+int arch_cpu_init(void)
+{
+ return at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK);
+}
+
+void arch_preboot_os(void)
+{
+ ulong cpiv;
+ at91_pit_t *pit = (at91_pit_t *)ATMEL_BASE_PIT;
+
+ cpiv = AT91_PIT_MR_PIV_MASK(readl(&pit->piir));
+
+ /*
+ * Disable PITC
+ * Add 0x1000 to current counter to stop it faster
+ * without waiting for wrapping back to 0
+ */
+ writel(cpiv + 0x1000, &pit->mr);
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+ char buf[32];
+
+ printf("CPU: %s\n", get_cpu_name());
+ printf("Crystal frequency: %8s MHz\n",
+ strmhz(buf, get_main_clk_rate()));
+ printf("CPU clock : %8s MHz\n",
+ strmhz(buf, get_cpu_clk_rate()));
+ printf("Master clock : %8s MHz\n",
+ strmhz(buf, get_mck_clk_rate()));
+
+ return 0;
+}
+#endif
+
+void enable_caches(void)
+{
+}
+
+unsigned int get_chip_id(void)
+{
+ return readl(ATMEL_BASE_DBGU + AT91_DBU_CIDR) & ~AT91_DBU_CIDR_MASK;
+}
+
+unsigned int get_extension_chip_id(void)
+{
+ return readl(ATMEL_BASE_DBGU + AT91_DBU_EXID);
+}
diff --git a/arch/arm/cpu/armv7/at91/reset.c b/arch/arm/cpu/armv7/at91/reset.c
new file mode 100644
index 0000000..b9f83d9
--- /dev/null
+++ b/arch/arm/cpu/armv7/at91/reset.c
@@ -0,0 +1,47 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * (C) Copyright 2013
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_rstc.h>
+
+/* Reset the cpu by telling the reset controller to do so */
+void reset_cpu(ulong ignored)
+{
+ at91_rstc_t *rstc = (at91_rstc_t *)ATMEL_BASE_RSTC;
+
+ writel(AT91_RSTC_KEY
+ | AT91_RSTC_CR_PROCRST /* Processor Reset */
+ | AT91_RSTC_CR_PERRST /* Peripheral Reset */
+#ifdef CONFIG_AT91RESET_EXTRST
+ | AT91_RSTC_CR_EXTRST /* External Reset (assert nRST pin) */
+#endif
+ , &rstc->cr);
+ /* never reached */
+ do { } while (1);
+}
diff --git a/arch/arm/cpu/armv7/at91/sama5d3_devices.c b/arch/arm/cpu/armv7/at91/sama5d3_devices.c
new file mode 100644
index 0000000..acf8b43
--- /dev/null
+++ b/arch/arm/cpu/armv7/at91/sama5d3_devices.c
@@ -0,0 +1,196 @@
+/*
+ * Copyright (C) 2012-2013 Atmel Corporation
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/sama5d3.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+#include <asm/io.h>
+
+unsigned int has_emac()
+{
+ return cpu_is_sama5d31() || cpu_is_sama5d35();
+}
+
+unsigned int has_gmac()
+{
+ return !cpu_is_sama5d31();
+}
+
+unsigned int has_lcdc()
+{
+ return !cpu_is_sama5d35();
+}
+
+char *get_cpu_name()
+{
+ unsigned int extension_id = get_extension_chip_id();
+
+ if (cpu_is_sama5d3())
+ switch (extension_id) {
+ case ARCH_EXID_SAMA5D31:
+ return "SAMA5D31";
+ case ARCH_EXID_SAMA5D33:
+ return "SAMA5D33";
+ case ARCH_EXID_SAMA5D34:
+ return "SAMA5D34";
+ case ARCH_EXID_SAMA5D35:
+ return "SAMA5D35";
+ default:
+ return "Unknown CPU type";
+ }
+ else
+ return "Unknown CPU type";
+}
+
+void at91_serial0_hw_init(void)
+{
+ at91_set_a_periph(AT91_PIO_PORTD, 18, 1); /* TXD0 */
+ at91_set_a_periph(AT91_PIO_PORTD, 17, 0); /* RXD0 */
+
+ /* Enable clock */
+ at91_periph_clk_enable(ATMEL_ID_USART0);
+}
+
+void at91_serial1_hw_init(void)
+{
+ at91_set_a_periph(AT91_PIO_PORTB, 29, 1); /* TXD1 */
+ at91_set_a_periph(AT91_PIO_PORTB, 28, 0); /* RXD1 */
+
+ /* Enable clock */
+ at91_periph_clk_enable(ATMEL_ID_USART1);
+}
+
+void at91_serial2_hw_init(void)
+{
+ at91_set_b_periph(AT91_PIO_PORTE, 26, 1); /* TXD2 */
+ at91_set_b_periph(AT91_PIO_PORTE, 25, 0); /* RXD2 */
+
+ /* Enable clock */
+ at91_periph_clk_enable(ATMEL_ID_USART2);
+}
+
+void at91_seriald_hw_init(void)
+{
+ at91_set_a_periph(AT91_PIO_PORTB, 31, 1); /* DTXD */
+ at91_set_a_periph(AT91_PIO_PORTB, 30, 0); /* DRXD */
+
+ /* Enable clock */
+ at91_periph_clk_enable(ATMEL_ID_SYS);
+}
+
+#if defined(CONFIG_ATMEL_SPI)
+void at91_spi0_hw_init(unsigned long cs_mask)
+{
+ at91_set_a_periph(AT91_PIO_PORTD, 10, 0); /* SPI0_MISO */
+ at91_set_a_periph(AT91_PIO_PORTD, 11, 0); /* SPI0_MOSI */
+ at91_set_a_periph(AT91_PIO_PORTD, 12, 0); /* SPI0_SPCK */
+
+ if (cs_mask & (1 << 0))
+ at91_set_pio_output(AT91_PIO_PORTD, 13, 1);
+ if (cs_mask & (1 << 1))
+ at91_set_pio_output(AT91_PIO_PORTD, 14, 1);
+ if (cs_mask & (1 << 2))
+ at91_set_pio_output(AT91_PIO_PORTD, 15, 1);
+ if (cs_mask & (1 << 3))
+ at91_set_pio_output(AT91_PIO_PORTD, 16, 1);
+
+ /* Enable clock */
+ at91_periph_clk_enable(ATMEL_ID_SPI0);
+}
+#endif
+
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+void at91_mci_hw_init(void)
+{
+ at91_set_a_periph(AT91_PIO_PORTD, 0, 0); /* MCI0 CMD */
+ at91_set_a_periph(AT91_PIO_PORTD, 1, 0); /* MCI0 DA0 */
+ at91_set_a_periph(AT91_PIO_PORTD, 2, 0); /* MCI0 DA1 */
+ at91_set_a_periph(AT91_PIO_PORTD, 3, 0); /* MCI0 DA2 */
+ at91_set_a_periph(AT91_PIO_PORTD, 4, 0); /* MCI0 DA3 */
+#ifdef CONFIG_ATMEL_MCI_8BIT
+ at91_set_a_periph(AT91_PIO_PORTD, 5, 0); /* MCI0 DA4 */
+ at91_set_a_periph(AT91_PIO_PORTD, 6, 0); /* MCI0 DA5 */
+ at91_set_a_periph(AT91_PIO_PORTD, 7, 0); /* MCI0 DA6 */
+ at91_set_a_periph(AT91_PIO_PORTD, 8, 0); /* MCI0 DA7 */
+#endif
+ at91_set_a_periph(AT91_PIO_PORTD, 9, 0); /* MCI0 CLK */
+
+ /* Enable clock */
+ at91_periph_clk_enable(ATMEL_ID_MCI0);
+}
+#endif
+
+#ifdef CONFIG_MACB
+void at91_macb_hw_init(void)
+{
+ at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* ETXCK_EREFCK */
+ at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* ERXDV */
+ at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* ERX0 */
+ at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* ERX1 */
+ at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* ERXER */
+ at91_set_a_periph(AT91_PIO_PORTC, 4, 0); /* ETXEN */
+ at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* ETX0 */
+ at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* ETX1 */
+ at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* EMDIO */
+ at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* EMDC */
+
+ /* Enable clock */
+ at91_periph_clk_enable(ATMEL_ID_EMAC);
+}
+#endif
+
+#ifdef CONFIG_LCD
+void at91_lcd_hw_init(void)
+{
+ at91_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */
+ at91_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */
+ at91_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */
+ at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */
+ at91_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */
+ at91_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */
+
+ /* The lower 16-bit of LCD only available on Port A */
+ at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */
+ at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */
+ at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */
+ at91_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */
+ at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */
+ at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */
+ at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */
+ at91_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */
+ at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD8 */
+ at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD9 */
+ at91_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */
+ at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */
+ at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */
+ at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */
+ at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */
+ at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */
+
+ /* Enable clock */
+ at91_periph_clk_enable(ATMEL_ID_LCDC);
+}
+#endif
diff --git a/arch/arm/cpu/armv7/at91/timer.c b/arch/arm/cpu/armv7/at91/timer.c
new file mode 100644
index 0000000..b3a450f
--- /dev/null
+++ b/arch/arm/cpu/armv7/at91/timer.c
@@ -0,0 +1,139 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * (C) Copyright 2013
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_pit.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/clk.h>
+#include <div64.h>
+
+#if !defined(CONFIG_AT91FAMILY)
+# error You need to define CONFIG_AT91FAMILY in your board config!
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * We're using the SAMA5D3x PITC in 32 bit mode, by
+ * setting the 20 bit counter period to its maximum (0xfffff).
+ * (See the relevant data sheets to understand that this really works)
+ *
+ * We do also mimic the typical powerpc way of incrementing
+ * two 32 bit registers called tbl and tbu.
+ *
+ * Those registers increment at 1/16 the main clock rate.
+ */
+
+#define TIMER_LOAD_VAL 0xfffff
+
+static inline unsigned long long tick_to_time(unsigned long long tick)
+{
+ tick *= CONFIG_SYS_HZ;
+ do_div(tick, gd->arch.timer_rate_hz);
+
+ return tick;
+}
+
+static inline unsigned long long usec_to_tick(unsigned long long usec)
+{
+ usec *= gd->arch.timer_rate_hz;
+ do_div(usec, 1000000);
+
+ return usec;
+}
+
+/*
+ * Use the PITC in full 32 bit incrementing mode
+ */
+int timer_init(void)
+{
+ at91_pit_t *pit = (at91_pit_t *)ATMEL_BASE_PIT;
+
+ /* Enable PITC Clock */
+ at91_periph_clk_enable(ATMEL_ID_SYS);
+
+ /* Enable PITC */
+ writel(TIMER_LOAD_VAL | AT91_PIT_MR_EN , &pit->mr);
+
+ gd->arch.timer_rate_hz = gd->arch.mck_rate_hz / 16;
+ gd->arch.tbu = 0;
+ gd->arch.tbl = 0;
+
+ return 0;
+}
+
+/*
+ * Get the current 64 bit timer tick count
+ */
+unsigned long long get_ticks(void)
+{
+ at91_pit_t *pit = (at91_pit_t *)ATMEL_BASE_PIT;
+
+ ulong now = readl(&pit->piir);
+
+ /* increment tbu if tbl has rolled over */
+ if (now < gd->arch.tbl)
+ gd->arch.tbu++;
+ gd->arch.tbl = now;
+ return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl;
+}
+
+void __udelay(unsigned long usec)
+{
+ unsigned long long start;
+ ulong tmo;
+
+ start = get_ticks(); /* get current timestamp */
+ tmo = usec_to_tick(usec); /* convert usecs to ticks */
+ while ((get_ticks() - start) < tmo)
+ ; /* loop till time has passed */
+}
+
+/*
+ * get_timer(base) can be used to check for timeouts or
+ * to measure elasped time relative to an event:
+ *
+ * ulong start_time = get_timer(0) sets start_time to the current
+ * time value.
+ * get_timer(start_time) returns the time elapsed since then.
+ *
+ * The time is used in CONFIG_SYS_HZ units!
+ */
+ulong get_timer(ulong base)
+{
+ return tick_to_time(get_ticks()) - base;
+}
+
+/*
+ * Return the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+ return gd->arch.timer_rate_hz;
+}
diff --git a/arch/arm/cpu/armv7/lowlevel_init.S b/arch/arm/cpu/armv7/lowlevel_init.S
index 0d45528..0a15aa4 100644
--- a/arch/arm/cpu/armv7/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/lowlevel_init.S
@@ -37,7 +37,13 @@
*/
ldr sp, =CONFIG_SYS_INIT_SP_ADDR
bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
-
+#ifdef CONFIG_SPL_BUILD
+ ldr r8, =gdata
+#else
+ sub sp, #GD_SIZE
+ bic sp, sp, #7
+ mov r8, sp
+#endif
/*
* Save the old lr(passed in ip) and the current lr to stack
*/
diff --git a/arch/arm/cpu/armv7/mx5/Makefile b/arch/arm/cpu/armv7/mx5/Makefile
index ecd1184..e05fae9 100644
--- a/arch/arm/cpu/armv7/mx5/Makefile
+++ b/arch/arm/cpu/armv7/mx5/Makefile
@@ -27,7 +27,7 @@
LIB = $(obj)lib$(SOC).o
-COBJS = soc.o clock.o iomux.o
+COBJS = soc.o clock.o
SOBJS = lowlevel_init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/arch/arm/cpu/armv7/mx5/clock.c b/arch/arm/cpu/armv7/mx5/clock.c
index 76c2c52..431756e 100644
--- a/arch/arm/cpu/armv7/mx5/clock.c
+++ b/arch/arm/cpu/armv7/mx5/clock.c
@@ -739,10 +739,11 @@
static int config_nfc_clk(u32 nfc_clk)
{
u32 parent_rate = get_emi_slow_clk();
- u32 div = parent_rate / nfc_clk;
+ u32 div;
- if (nfc_clk <= 0)
+ if (nfc_clk == 0)
return -EINVAL;
+ div = parent_rate / nfc_clk;
if (div == 0)
div++;
if (parent_rate / div > NFC_CLK_MAX)
@@ -755,6 +756,15 @@
return 0;
}
+void enable_nfc_clk(unsigned char enable)
+{
+ unsigned int cg = enable ? MXC_CCM_CCGR_CG_ON : MXC_CCM_CCGR_CG_OFF;
+
+ clrsetbits_le32(&mxc_ccm->CCGR5,
+ MXC_CCM_CCGR5_EMI_ENFC(MXC_CCM_CCGR_CG_MASK),
+ MXC_CCM_CCGR5_EMI_ENFC(cg));
+}
+
/* Config main_bus_clock for periphs */
static int config_periph_clk(u32 ref, u32 freq)
{
diff --git a/arch/arm/cpu/armv7/mx5/iomux.c b/arch/arm/cpu/armv7/mx5/iomux.c
deleted file mode 100644
index d4e3bbb..0000000
--- a/arch/arm/cpu/armv7/mx5/iomux.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * (C) Copyright 2009 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/mx5x_pins.h>
-#include <asm/arch/iomux.h>
-#include <asm/arch/sys_proto.h>
-
-/* IOMUX register (base) addresses */
-enum iomux_reg_addr {
- IOMUXGPR0 = IOMUXC_BASE_ADDR,
- IOMUXGPR1 = IOMUXC_BASE_ADDR + 0x004,
- IOMUXSW_MUX_CTL = IOMUXC_BASE_ADDR,
- IOMUXSW_MUX_END = IOMUXC_BASE_ADDR + MUX_I_END,
- IOMUXSW_PAD_CTL = IOMUXC_BASE_ADDR + PAD_I_START,
- IOMUXSW_INPUT_CTL = IOMUXC_BASE_ADDR + INPUT_CTL_START,
-};
-
-#define MUX_PIN_NUM_MAX (((MUX_I_END - MUX_I_START) >> 2) + 1)
-
-/* Get the iomux register address of this pin */
-static inline u32 get_mux_reg(iomux_pin_name_t pin)
-{
- u32 mux_reg = PIN_TO_IOMUX_MUX(pin);
-
-#if defined(CONFIG_MX51)
- if (is_soc_rev(CHIP_REV_2_0) < 0) {
- /*
- * Fixup register address:
- * i.MX51 TO1 has offset with the register
- * which is define as TO2.
- */
- if ((pin == MX51_PIN_NANDF_RB5) ||
- (pin == MX51_PIN_NANDF_RB6) ||
- (pin == MX51_PIN_NANDF_RB7))
- ; /* Do nothing */
- else if (mux_reg >= 0x2FC)
- mux_reg += 8;
- else if (mux_reg >= 0x130)
- mux_reg += 0xC;
- }
-#endif
- mux_reg += IOMUXSW_MUX_CTL;
- return mux_reg;
-}
-
-/* Get the pad register address of this pin */
-static inline u32 get_pad_reg(iomux_pin_name_t pin)
-{
- u32 pad_reg = PIN_TO_IOMUX_PAD(pin);
-
-#if defined(CONFIG_MX51)
- if (is_soc_rev(CHIP_REV_2_0) < 0) {
- /*
- * Fixup register address:
- * i.MX51 TO1 has offset with the register
- * which is define as TO2.
- */
- if ((pin == MX51_PIN_NANDF_RB5) ||
- (pin == MX51_PIN_NANDF_RB6) ||
- (pin == MX51_PIN_NANDF_RB7))
- ; /* Do nothing */
- else if (pad_reg == 0x4D0 - PAD_I_START)
- pad_reg += 0x4C;
- else if (pad_reg == 0x860 - PAD_I_START)
- pad_reg += 0x9C;
- else if (pad_reg >= 0x804 - PAD_I_START)
- pad_reg += 0xB0;
- else if (pad_reg >= 0x7FC - PAD_I_START)
- pad_reg += 0xB4;
- else if (pad_reg >= 0x4E4 - PAD_I_START)
- pad_reg += 0xCC;
- else
- pad_reg += 8;
- }
-#endif
- pad_reg += IOMUXSW_PAD_CTL;
- return pad_reg;
-}
-
-/* Get the last iomux register address */
-static inline u32 get_mux_end(void)
-{
-#if defined(CONFIG_MX51)
- if (is_soc_rev(CHIP_REV_2_0) < 0)
- return IOMUXC_BASE_ADDR + (0x3F8 - 4);
- else
- return IOMUXC_BASE_ADDR + (0x3F0 - 4);
-#endif
- return IOMUXSW_MUX_END;
-}
-
-/*
- * This function is used to configure a pin through the IOMUX module.
- * @param pin a pin number as defined in iomux_pin_name_t
- * @param cfg an output function as defined in iomux_pin_cfg_t
- *
- * @return 0 if successful; Non-zero otherwise
- */
-static void iomux_config_mux(iomux_pin_name_t pin, iomux_pin_cfg_t cfg)
-{
- u32 mux_reg = get_mux_reg(pin);
-
- if ((mux_reg > get_mux_end()) || (mux_reg < IOMUXSW_MUX_CTL))
- return ;
- if (cfg == IOMUX_CONFIG_GPIO)
- writel(PIN_TO_ALT_GPIO(pin), mux_reg);
- else
- writel(cfg, mux_reg);
-}
-
-/*
- * Request ownership for an IO pin. This function has to be the first one
- * being called before that pin is used. The caller has to check the
- * return value to make sure it returns 0.
- *
- * @param pin a name defined by iomux_pin_name_t
- * @param cfg an input function as defined in iomux_pin_cfg_t
- *
- */
-void mxc_request_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t cfg)
-{
- iomux_config_mux(pin, cfg);
-}
-
-/*
- * Release ownership for an IO pin
- *
- * @param pin a name defined by iomux_pin_name_t
- * @param cfg an input function as defined in iomux_pin_cfg_t
- */
-void mxc_free_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t cfg)
-{
-}
-
-/*
- * This function configures the pad value for a IOMUX pin.
- *
- * @param pin a pin number as defined in iomux_pin_name_t
- * @param config the ORed value of elements defined in iomux_pad_config_t
- */
-void mxc_iomux_set_pad(iomux_pin_name_t pin, u32 config)
-{
- u32 pad_reg = get_pad_reg(pin);
- writel(config, pad_reg);
-}
-
-unsigned int mxc_iomux_get_pad(iomux_pin_name_t pin)
-{
- u32 pad_reg = get_pad_reg(pin);
- return readl(pad_reg);
-}
-
-/*
- * This function configures daisy-chain
- *
- * @param input index of input select register
- * @param config the binary value of elements
- */
-void mxc_iomux_set_input(iomux_input_select_t input, u32 config)
-{
- u32 reg = IOMUXSW_INPUT_CTL + (input << 2);
-
- writel(config, reg);
-}
diff --git a/arch/arm/cpu/armv7/mx5/soc.c b/arch/arm/cpu/armv7/mx5/soc.c
index 263658a..3d50a5d 100644
--- a/arch/arm/cpu/armv7/mx5/soc.c
+++ b/arch/arm/cpu/armv7/mx5/soc.c
@@ -72,6 +72,13 @@
return system_rev;
}
+#ifdef CONFIG_REVISION_TAG
+u32 __weak get_board_rev(void)
+{
+ return get_cpu_rev();
+}
+#endif
+
#ifndef CONFIG_SYS_DCACHE_OFF
void enable_caches(void)
{
diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
index a50db70..3c0d908 100644
--- a/arch/arm/cpu/armv7/mx6/clock.c
+++ b/arch/arm/cpu/armv7/mx6/clock.c
@@ -37,6 +37,20 @@
struct mxc_ccm_reg *imx_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+#ifdef CONFIG_MXC_OCOTP
+void enable_ocotp_clk(unsigned char enable)
+{
+ u32 reg;
+
+ reg = __raw_readl(&imx_ccm->CCGR2);
+ if (enable)
+ reg |= MXC_CCM_CCGR2_OCOTP_CTRL_MASK;
+ else
+ reg &= ~MXC_CCM_CCGR2_OCOTP_CTRL_MASK;
+ __raw_writel(reg, &imx_ccm->CCGR2);
+}
+#endif
+
void enable_usboh3_clk(unsigned char enable)
{
u32 reg;
@@ -186,12 +200,16 @@
static u32 get_uart_clk(void)
{
u32 reg, uart_podf;
-
+ u32 freq = PLL3_80M;
reg = __raw_readl(&imx_ccm->cscdr1);
+#ifdef CONFIG_MX6SL
+ if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL)
+ freq = MXC_HCLK;
+#endif
reg &= MXC_CCM_CSCDR1_UART_CLK_PODF_MASK;
uart_podf = reg >> MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET;
- return PLL3_80M / (uart_podf + 1);
+ return freq / (uart_podf + 1);
}
static u32 get_cspi_clk(void)
@@ -252,6 +270,35 @@
return root_freq / (emi_slow_pof + 1);
}
+#ifdef CONFIG_MX6SL
+static u32 get_mmdc_ch0_clk(void)
+{
+ u32 cbcmr = __raw_readl(&imx_ccm->cbcmr);
+ u32 cbcdr = __raw_readl(&imx_ccm->cbcdr);
+ u32 freq, podf;
+
+ podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH1_PODF_MASK) \
+ >> MXC_CCM_CBCDR_MMDC_CH1_PODF_OFFSET;
+
+ switch ((cbcmr & MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_MASK) >>
+ MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_OFFSET) {
+ case 0:
+ freq = decode_pll(PLL_BUS, MXC_HCLK);
+ break;
+ case 1:
+ freq = PLL2_PFD2_FREQ;
+ break;
+ case 2:
+ freq = PLL2_PFD0_FREQ;
+ break;
+ case 3:
+ freq = PLL2_PFD2_DIV_FREQ;
+ }
+
+ return freq / (podf + 1);
+
+}
+#else
static u32 get_mmdc_ch0_clk(void)
{
u32 cbcdr = __raw_readl(&imx_ccm->cbcdr);
@@ -260,6 +307,7 @@
return get_periph_clk() / (mmdc_ch0_podf + 1);
}
+#endif
static u32 get_usdhc_clk(u32 port)
{
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index 2ea8ca3..fc436fb 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -30,6 +30,7 @@
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <asm/imx-common/boot_mode.h>
+#include <asm/imx-common/dma.h>
#include <stdbool.h>
struct scu_regs {
@@ -151,6 +152,12 @@
set_vddsoc(1200); /* Set VDDSOC to 1.2V */
imx_set_wdog_powerdown(false); /* Disable PDE bit of WMCR register */
+
+#ifdef CONFIG_APBH_DMA
+ /* Start APBH DMA */
+ mxs_dma_init();
+#endif
+
return 0;
}
@@ -165,8 +172,8 @@
#if defined(CONFIG_FEC_MXC)
void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
{
- struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
- struct fuse_bank *bank = &iim->bank[4];
+ struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+ struct fuse_bank *bank = &ocotp->bank[4];
struct fuse_bank4_regs *fuse =
(struct fuse_bank4_regs *)bank->fuse_regs;
diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile
index 55e82ba..c4b9809 100644
--- a/arch/arm/cpu/armv7/omap-common/Makefile
+++ b/arch/arm/cpu/armv7/omap-common/Makefile
@@ -34,6 +34,7 @@
COBJS += clocks-common.o
COBJS += emif-common.o
COBJS += vc.o
+COBJS += abb.o
endif
ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),)
diff --git a/arch/arm/cpu/armv7/omap-common/abb.c b/arch/arm/cpu/armv7/omap-common/abb.c
new file mode 100644
index 0000000..87d1fb8
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap-common/abb.c
@@ -0,0 +1,137 @@
+/*
+ *
+ * Adaptive Body Bias programming sequence for OMAP family
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * Andrii Tseglytskyi <andrii.tseglytskyi@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/omap_common.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+
+__weak s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb)
+{
+ return -1;
+}
+
+static void abb_setup_timings(u32 setup)
+{
+ u32 sys_rate, sr2_cnt, clk_cycles;
+
+ /*
+ * SR2_WTCNT_VALUE is the settling time for the ABB ldo after a
+ * transition and must be programmed with the correct time at boot.
+ * The value programmed into the register is the number of SYS_CLK
+ * clock cycles that match a given wall time profiled for the ldo.
+ * This value depends on:
+ * settling time of ldo in micro-seconds (varies per OMAP family),
+ * of clock cycles per SYS_CLK period (varies per OMAP family),
+ * the SYS_CLK frequency in MHz (varies per board)
+ * The formula is:
+ *
+ * ldo settling time (in micro-seconds)
+ * SR2_WTCNT_VALUE = ------------------------------------------
+ * (# system clock cycles) * (sys_clk period)
+ *
+ * Put another way:
+ *
+ * SR2_WTCNT_VALUE = settling time / (# SYS_CLK cycles / SYS_CLK rate))
+ *
+ * To avoid dividing by zero multiply both "# clock cycles" and
+ * "settling time" by 10 such that the final result is the one we want.
+ */
+
+ /* calculate SR2_WTCNT_VALUE */
+ sys_rate = DIV_ROUND(V_OSCK, 1000000);
+ clk_cycles = DIV_ROUND(OMAP_ABB_CLOCK_CYCLES * 10, sys_rate);
+ sr2_cnt = DIV_ROUND(OMAP_ABB_SETTLING_TIME * 10, clk_cycles);
+
+ setbits_le32(setup,
+ sr2_cnt << (ffs(OMAP_ABB_SETUP_SR2_WTCNT_VALUE_MASK) - 1));
+}
+
+void abb_setup(u32 fuse, u32 ldovbb, u32 setup, u32 control,
+ u32 txdone, u32 txdone_mask, u32 opp)
+{
+ u32 abb_type_mask, opp_sel_mask;
+
+ /* sanity check */
+ if (!setup || !control || !txdone)
+ return;
+
+ /* setup ABB only in case of Fast or Slow OPP */
+ switch (opp) {
+ case OMAP_ABB_FAST_OPP:
+ abb_type_mask = OMAP_ABB_SETUP_ACTIVE_FBB_SEL_MASK;
+ opp_sel_mask = OMAP_ABB_CONTROL_FAST_OPP_SEL_MASK;
+ break;
+ case OMAP_ABB_SLOW_OPP:
+ abb_type_mask = OMAP_ABB_SETUP_ACTIVE_RBB_SEL_MASK;
+ opp_sel_mask = OMAP_ABB_CONTROL_SLOW_OPP_SEL_MASK;
+ break;
+ default:
+ return;
+ }
+
+ /*
+ * For some OMAP silicons additional setup for LDOVBB register is
+ * required. This is determined by data retrieved from corresponding
+ * OPP EFUSE register. Data, which is retrieved from EFUSE - is
+ * ABB enable/disable flag and VSET value, which must be copied
+ * to LDOVBB register. If function call fails - return quietly,
+ * it means no ABB is required for such silicon.
+ *
+ * For silicons, which don't require LDOVBB setup "fuse" and
+ * "ldovbb" offsets are not defined. ABB will be initialized in
+ * the common way for them.
+ */
+ if (fuse && ldovbb) {
+ if (abb_setup_ldovbb(fuse, ldovbb))
+ return;
+ }
+
+ /* clear ABB registers */
+ writel(0, setup);
+ writel(0, control);
+
+ /* configure timings, based on oscillator value */
+ abb_setup_timings(setup);
+
+ /* clear pending interrupts before setup */
+ setbits_le32(txdone, txdone_mask);
+
+ /* select ABB type */
+ setbits_le32(setup, abb_type_mask | OMAP_ABB_SETUP_SR2EN_MASK);
+
+ /* initiate ABB ldo change */
+ setbits_le32(control, opp_sel_mask | OMAP_ABB_CONTROL_OPP_CHANGE_MASK);
+
+ /* wait until transition complete */
+ if (!wait_on_value(txdone_mask, txdone_mask, (void *)txdone, LDELAY))
+ puts("Error: ABB txdone is not set\n");
+
+ /* clear ABB tranxdone */
+ setbits_le32(txdone, txdone_mask);
+}
diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c
index 24cbe2d..76ae1b6 100644
--- a/arch/arm/cpu/armv7/omap-common/boot-common.c
+++ b/arch/arm/cpu/armv7/omap-common/boot-common.c
@@ -23,31 +23,56 @@
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/sys_proto.h>
-/*
- * This is used to verify if the configuration header
- * was executed by rom code prior to control of transfer
- * to the bootloader. SPL is responsible for saving and
- * passing the boot_params pointer to the u-boot.
- */
-struct omap_boot_parameters boot_params __attribute__ ((section(".data")));
+DECLARE_GLOBAL_DATA_PTR;
+
+void save_omap_boot_params(void)
+{
+ u32 rom_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS);
+ u8 boot_device;
+ u32 dev_desc, dev_data;
+
+ if ((rom_params < NON_SECURE_SRAM_START) ||
+ (rom_params > NON_SECURE_SRAM_END))
+ return;
+
+ /*
+ * rom_params can be type casted to omap_boot_parameters and
+ * used. But it not correct to assume that romcode structure
+ * encoding would be same as u-boot. So use the defined offsets.
+ */
+ gd->arch.omap_boot_params.omap_bootdevice = boot_device =
+ *((u8 *)(rom_params + BOOT_DEVICE_OFFSET));
+
+ gd->arch.omap_boot_params.ch_flags =
+ *((u8 *)(rom_params + CH_FLAGS_OFFSET));
+
+ if ((boot_device >= MMC_BOOT_DEVICES_START) &&
+ (boot_device <= MMC_BOOT_DEVICES_END)) {
+#if !defined(CONFIG_AM33XX) && !defined(CONFIG_TI81XX)
+ if ((omap_hw_init_context() ==
+ OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)) {
+ gd->arch.omap_boot_params.omap_bootmode =
+ *((u8 *)(rom_params + BOOT_MODE_OFFSET));
+ } else
+#endif
+ {
+ dev_desc = *((u32 *)(rom_params + DEV_DESC_PTR_OFFSET));
+ dev_data = *((u32 *)(dev_desc + DEV_DATA_PTR_OFFSET));
+ gd->arch.omap_boot_params.omap_bootmode =
+ *((u32 *)(dev_data + BOOT_MODE_OFFSET));
+ }
+ }
+}
#ifdef CONFIG_SPL_BUILD
-/*
- * We use static variables because global data is not ready yet.
- * Initialized data is available in SPL right from the beginning.
- * We would not typically need to save these parameters in regular
- * U-Boot. This is needed only in SPL at the moment.
- */
-u32 omap_bootmode = MMCSD_MODE_FAT;
-
u32 spl_boot_device(void)
{
- return (u32) (boot_params.omap_bootdevice);
+ return (u32) (gd->arch.omap_boot_params.omap_bootdevice);
}
u32 spl_boot_mode(void)
{
- return omap_bootmode;
+ return gd->arch.omap_boot_params.omap_bootmode;
}
void spl_board_init(void)
@@ -73,4 +98,15 @@
}
return 0;
}
+
+void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
+{
+ typedef void __noreturn (*image_entry_noargs_t)(u32 *);
+ image_entry_noargs_t image_entry =
+ (image_entry_noargs_t) spl_image->entry_point;
+
+ debug("image entry point: 0x%X\n", spl_image->entry_point);
+ /* Pass the saved boot_params from rom code */
+ image_entry((u32 *)&gd->arch.omap_boot_params);
+}
#endif
diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c
index 2b955c7..ef23127 100644
--- a/arch/arm/cpu/armv7/omap-common/clocks-common.c
+++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c
@@ -30,9 +30,10 @@
* MA 02111-1307 USA
*/
#include <common.h>
+#include <i2c.h>
#include <asm/omap_common.h>
#include <asm/gpio.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <asm/utils.h>
#include <asm/omap_gpio.h>
@@ -49,13 +50,12 @@
const u32 sys_clk_array[8] = {
12000000, /* 12 MHz */
- 13000000, /* 13 MHz */
+ 20000000, /* 20 MHz */
16800000, /* 16.8 MHz */
19200000, /* 19.2 MHz */
26000000, /* 26 MHz */
27000000, /* 27 MHz */
38400000, /* 38.4 MHz */
- 20000000, /* 20 MHz */
};
static inline u32 __get_sys_clk_index(void)
@@ -74,13 +74,6 @@
/* SYS_CLKSEL - 1 to match the dpll param array indices */
ind = (readl((*prcm)->cm_sys_clksel) &
CM_SYS_CLKSEL_SYS_CLKSEL_MASK) - 1;
- /*
- * SYS_CLKSEL value for 20MHz is 0. This is introduced newly
- * in DRA7XX socs. SYS_CLKSEL -1 will be greater than
- * NUM_SYS_CLK. So considering the last 3 bits as the index
- * for the dpll param array.
- */
- ind &= CM_SYS_CLKSEL_SYS_CLKSEL_MASK;
}
return ind;
}
@@ -440,6 +433,12 @@
params = get_abe_dpll_params(*dplls_data);
#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK;
+
+ if (omap_revision() == DRA752_ES1_0)
+ /* Select the sys clk for dpll_abe */
+ clrsetbits_le32((*prcm)->cm_abe_pll_sys_clksel,
+ CM_CLKSEL_ABE_PLL_SYS_CLKSEL_MASK,
+ CM_ABE_PLL_SYS_CLKSEL_SYSCLK2);
#else
abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK;
/*
@@ -487,6 +486,10 @@
u32 offset = volt_mv;
int ret = 0;
+ if (!volt_mv)
+ return;
+
+ pmic->pmic_bus_init();
/* See if we can first get the GPIO if needed */
if (pmic->gpio_en)
ret = gpio_request(pmic->gpio, "PMIC_GPIO");
@@ -509,14 +512,45 @@
debug("do_scale_vcore: volt - %d offset_code - 0x%x\n", volt_mv,
offset_code);
- if (omap_vc_bypass_send_value(SMPS_I2C_SLAVE_ADDR,
- vcore_reg, offset_code))
+ if (pmic->pmic_write(pmic->i2c_slave_addr, vcore_reg, offset_code))
printf("Scaling voltage failed for 0x%x\n", vcore_reg);
if (pmic->gpio_en)
gpio_direction_output(pmic->gpio, 1);
}
+static u32 optimize_vcore_voltage(struct volts const *v)
+{
+ u32 val;
+ if (!v->value)
+ return 0;
+ if (!v->efuse.reg)
+ return v->value;
+
+ switch (v->efuse.reg_bits) {
+ case 16:
+ val = readw(v->efuse.reg);
+ break;
+ case 32:
+ val = readl(v->efuse.reg);
+ break;
+ default:
+ printf("Error: efuse 0x%08x bits=%d unknown\n",
+ v->efuse.reg, v->efuse.reg_bits);
+ return v->value;
+ }
+
+ if (!val) {
+ printf("Error: efuse 0x%08x bits=%d val=0, using %d\n",
+ v->efuse.reg, v->efuse.reg_bits, v->value);
+ return v->value;
+ }
+
+ debug("%s:efuse 0x%08x bits=%d Vnom=%d, using efuse value %d\n",
+ __func__, v->efuse.reg, v->efuse.reg_bits, v->value, val);
+ return val;
+}
+
/*
* Setup the voltages for vdd_mpu, vdd_core, and vdd_iva
* We set the maximum voltages allowed here because Smart-Reflex is not
@@ -525,16 +559,34 @@
*/
void scale_vcores(struct vcores_data const *vcores)
{
- omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ);
+ u32 val;
- do_scale_vcore(vcores->core.addr, vcores->core.value,
- vcores->core.pmic);
+ val = optimize_vcore_voltage(&vcores->core);
+ do_scale_vcore(vcores->core.addr, val, vcores->core.pmic);
- do_scale_vcore(vcores->mpu.addr, vcores->mpu.value,
- vcores->mpu.pmic);
+ val = optimize_vcore_voltage(&vcores->mpu);
+ do_scale_vcore(vcores->mpu.addr, val, vcores->mpu.pmic);
- do_scale_vcore(vcores->mm.addr, vcores->mm.value,
- vcores->mm.pmic);
+ /* Configure MPU ABB LDO after scale */
+ abb_setup((*ctrl)->control_std_fuse_opp_vdd_mpu_2,
+ (*ctrl)->control_wkup_ldovbb_mpu_voltage_ctrl,
+ (*prcm)->prm_abbldo_mpu_setup,
+ (*prcm)->prm_abbldo_mpu_ctrl,
+ (*prcm)->prm_irqstatus_mpu_2,
+ OMAP_ABB_MPU_TXDONE_MASK,
+ OMAP_ABB_FAST_OPP);
+
+ val = optimize_vcore_voltage(&vcores->mm);
+ do_scale_vcore(vcores->mm.addr, val, vcores->mm.pmic);
+
+ val = optimize_vcore_voltage(&vcores->gpu);
+ do_scale_vcore(vcores->gpu.addr, val, vcores->gpu.pmic);
+
+ val = optimize_vcore_voltage(&vcores->eve);
+ do_scale_vcore(vcores->eve.addr, val, vcores->eve.pmic);
+
+ val = optimize_vcore_voltage(&vcores->iva);
+ do_scale_vcore(vcores->iva.addr, val, vcores->iva.pmic);
if (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3) {
/* Configure LDO SRAM "magic" bits */
@@ -710,12 +762,14 @@
case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR:
case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH:
enable_basic_clocks();
+ timer_init();
scale_vcores(*omap_vcores);
setup_dplls();
#ifdef CONFIG_SYS_CLOCKS_ENABLE_ALL
setup_non_essential_dplls();
enable_non_essential_clocks();
#endif
+ setup_warmreset_time();
break;
default:
break;
@@ -724,3 +778,13 @@
if (OMAP_INIT_CONTEXT_SPL != omap_hw_init_context())
enable_basic_uboot_clocks();
}
+
+void gpi2c_init(void)
+{
+ static int gpi2c = 1;
+
+ if (gpi2c) {
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ gpi2c = 0;
+ }
+}
diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c
index cdb4439..652e5a7 100644
--- a/arch/arm/cpu/armv7/omap-common/emif-common.c
+++ b/arch/arm/cpu/armv7/omap-common/emif-common.c
@@ -27,7 +27,7 @@
#include <common.h>
#include <asm/emif.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <asm/omap_common.h>
#include <asm/utils.h>
@@ -209,7 +209,8 @@
writel(regs->temp_alert_config, &emif->emif_temp_alert_config);
writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw);
- if (omap_revision() >= OMAP5430_ES1_0) {
+ if ((omap_revision() >= OMAP5430_ES1_0) ||
+ (omap_revision() == DRA752_ES1_0)) {
writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0,
&emif->emif_l3_config);
} else if (omap_revision() >= OMAP4460_ES1_0) {
@@ -263,6 +264,18 @@
__udelay(130);
}
+static void ddr3_sw_leveling(u32 base, const struct emif_regs *regs)
+{
+ struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+
+ writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1);
+ writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw);
+ config_data_eye_leveling_samples(base);
+
+ writel(regs->emif_rd_wr_lvl_ctl, &emif->emif_rd_wr_lvl_ctl);
+ writel(regs->sdram_config, &emif->emif_sdram_config);
+}
+
static void ddr3_init(u32 base, const struct emif_regs *regs)
{
struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
@@ -273,6 +286,7 @@
* defined, contents of mode Registers must be fully initialized.
* H/W takes care of this initialization
*/
+ writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config);
writel(regs->sdram_config_init, &emif->emif_sdram_config);
writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1);
@@ -290,7 +304,10 @@
/* enable leveling */
writel(regs->emif_rd_wr_lvl_rmp_ctl, &emif->emif_rd_wr_lvl_rmp_ctl);
- ddr3_leveling(base, regs);
+ if (omap_revision() == DRA752_ES1_0)
+ ddr3_sw_leveling(base, regs);
+ else
+ ddr3_leveling(base, regs);
}
#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
@@ -1075,6 +1092,14 @@
else
ddr3_init(base, regs);
}
+ if (warm_reset() && (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3)) {
+ set_lpmode_selfrefresh(base);
+ emif_reset_phy(base);
+ if (omap_revision() == DRA752_ES1_0)
+ ddr3_sw_leveling(base, regs);
+ else
+ ddr3_leveling(base, regs);
+ }
/* Write to the shadow registers */
emif_update_timings(base, regs);
@@ -1262,10 +1287,10 @@
in_sdram = running_from_sdram();
debug("in_sdram = %d\n", in_sdram);
- if (!(in_sdram || warm_reset())) {
- if (sdram_type == EMIF_SDRAM_TYPE_LPDDR2)
+ if (!in_sdram) {
+ if ((sdram_type == EMIF_SDRAM_TYPE_LPDDR2) && !warm_reset())
bypass_dpll((*prcm)->cm_clkmode_dpll_core);
- else
+ else if (sdram_type == EMIF_SDRAM_TYPE_DDR3)
writel(CM_DLL_CTRL_NO_OVERRIDE, (*prcm)->cm_dll_ctrl);
}
diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
index 70d16a8..5df116e 100644
--- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c
+++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
@@ -84,7 +84,7 @@
return rev;
}
-void omap_rev_string(void)
+static void omap_rev_string(void)
{
u32 omap_rev = omap_revision();
u32 soc_variant = (omap_rev & 0xF0000000) >> 28;
@@ -101,11 +101,6 @@
}
#ifdef CONFIG_SPL_BUILD
-static void init_boot_params(void)
-{
- boot_params_ptr = (u32 *) &boot_params;
-}
-
void spl_display_print(void)
{
omap_rev_string();
@@ -116,6 +111,17 @@
{
}
+#ifdef CONFIG_ARCH_CPU_INIT
+/*
+ * SOC specific cpu init
+ */
+int arch_cpu_init(void)
+{
+ save_omap_boot_params();
+ return 0;
+}
+#endif /* CONFIG_ARCH_CPU_INIT */
+
/*
* Routine: s_init
* Description: Does early system init of watchdog, muxing, andclocks
@@ -132,6 +138,14 @@
*/
void s_init(void)
{
+ /*
+ * Save the boot parameters passed from romcode.
+ * We cannot delay the saving further than this,
+ * to prevent overwrites.
+ */
+#ifdef CONFIG_SPL_BUILD
+ save_omap_boot_params();
+#endif
init_omap_revision();
hw_data_init();
@@ -152,11 +166,8 @@
#endif
prcm_init();
#ifdef CONFIG_SPL_BUILD
- timer_init();
-
/* For regular u-boot sdram_init() is called from dram_init() */
sdram_init();
- init_boot_params();
#endif
}
diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
index 90b3c8a..c489536 100644
--- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
@@ -28,59 +28,13 @@
#include <config.h>
#include <asm/arch/omap.h>
+#include <asm/omap_common.h>
#include <asm/arch/spl.h>
#include <linux/linkage.h>
ENTRY(save_boot_params)
- /*
- * See if the rom code passed pointer is valid:
- * It is not valid if it is not in non-secure SRAM
- * This may happen if you are booting with the help of
- * debugger
- */
- ldr r2, =NON_SECURE_SRAM_START
- cmp r2, r0
- bgt 1f
- ldr r2, =NON_SECURE_SRAM_END
- cmp r2, r0
- blt 1f
-
- /*
- * store the boot params passed from rom code or saved
- * and passed by SPL
- */
- cmp r0, #0
- beq 1f
- ldr r1, =boot_params
+ ldr r1, =OMAP_SRAM_SCRATCH_BOOT_PARAMS
str r0, [r1]
-#ifdef CONFIG_SPL_BUILD
- /* Store the boot device in spl_boot_device */
- ldrb r2, [r0, #BOOT_DEVICE_OFFSET] @ r1 <- value of boot device
- and r2, #BOOT_DEVICE_MASK
- ldr r3, =boot_params
- strb r2, [r3, #BOOT_DEVICE_OFFSET] @ spl_boot_device <- r1
-
- /*
- * boot mode is only valid for device that can be raw or FAT booted.
- * in other cases it may be fatal to look. While platforms differ
- * in the values used for each MMC slot, they are contiguous.
- */
- cmp r2, #MMC_BOOT_DEVICES_START
- blt 2f
- cmp r2, #MMC_BOOT_DEVICES_END
- bgt 2f
- /* Store the boot mode (raw/FAT) in omap_bootmode */
- ldr r2, [r0, #DEV_DESC_PTR_OFFSET] @ get the device descriptor ptr
- ldr r2, [r2, #DEV_DATA_PTR_OFFSET] @ get the pDeviceData ptr
- ldr r2, [r2, #BOOT_MODE_OFFSET] @ get the boot mode
- ldr r3, =omap_bootmode
- str r2, [r3]
-#endif
-2:
- ldrb r2, [r0, #CH_FLAGS_OFFSET]
- ldr r3, =boot_params
- strb r2, [r3, #CH_FLAGS_OFFSET]
-1:
bx lr
ENDPROC(save_boot_params)
diff --git a/arch/arm/cpu/armv7/omap-common/reset.c b/arch/arm/cpu/armv7/omap-common/reset.c
index 587bb47..57ea9d9 100644
--- a/arch/arm/cpu/armv7/omap-common/reset.c
+++ b/arch/arm/cpu/armv7/omap-common/reset.c
@@ -39,3 +39,7 @@
{
return (readl(PRM_RSTST) & PRM_RSTST_WARM_RESET_MASK);
}
+
+void __weak setup_warmreset_time(void)
+{
+}
diff --git a/arch/arm/cpu/armv7/omap-common/timer.c b/arch/arm/cpu/armv7/omap-common/timer.c
index 507f687..5926a5a 100644
--- a/arch/arm/cpu/armv7/omap-common/timer.c
+++ b/arch/arm/cpu/armv7/omap-common/timer.c
@@ -35,6 +35,7 @@
#include <common.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
+#include <asm/arch/clock.h>
DECLARE_GLOBAL_DATA_PTR;
diff --git a/arch/arm/cpu/armv7/omap-common/vc.c b/arch/arm/cpu/armv7/omap-common/vc.c
index e6e5f78..a68f1d1 100644
--- a/arch/arm/cpu/armv7/omap-common/vc.c
+++ b/arch/arm/cpu/armv7/omap-common/vc.c
@@ -17,6 +17,7 @@
#include <common.h>
#include <asm/omap_common.h>
#include <asm/arch/sys_proto.h>
+#include <asm/arch/clock.h>
/*
* Define Master code if there are multiple masters on the I2C_SR bus.
@@ -57,7 +58,7 @@
* omap_vc_init() - Initialization for Voltage controller
* @speed_khz: I2C buspeed in KHz
*/
-void omap_vc_init(u16 speed_khz)
+static void omap_vc_init(u16 speed_khz)
{
u32 val;
u32 sys_clk_khz, cycles_hi, cycles_low;
@@ -137,3 +138,14 @@
/* All good.. */
return 0;
}
+
+void sri2c_init(void)
+{
+ static int sri2c = 1;
+
+ if (sri2c) {
+ omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ);
+ sri2c = 0;
+ }
+ return;
+}
diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c
index 09c51f6..81cc859 100644
--- a/arch/arm/cpu/armv7/omap3/clock.c
+++ b/arch/arm/cpu/armv7/omap3/clock.c
@@ -27,7 +27,7 @@
#include <common.h>
#include <asm/io.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
#include <asm/arch/clocks_omap3.h>
#include <asm/arch/mem.h>
#include <asm/arch/sys_proto.h>
diff --git a/arch/arm/cpu/armv7/omap4/emif.c b/arch/arm/cpu/armv7/omap4/emif.c
index 53f6063..0ddf35f 100644
--- a/arch/arm/cpu/armv7/omap4/emif.c
+++ b/arch/arm/cpu/armv7/omap4/emif.c
@@ -31,8 +31,8 @@
#include <asm/utils.h>
#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-u32 *const T_num = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_NUM;
-u32 *const T_den = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_DEN;
+u32 *const T_num = (u32 *)OMAP_SRAM_SCRATCH_EMIF_T_NUM;
+u32 *const T_den = (u32 *)OMAP_SRAM_SCRATCH_EMIF_T_DEN;
#endif
#ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c
index 04977b4..b97cad4 100644
--- a/arch/arm/cpu/armv7/omap4/hw_data.c
+++ b/arch/arm/cpu/armv7/omap4/hw_data.c
@@ -29,7 +29,7 @@
#include <asm/arch/omap.h>
#include <asm/arch/sys_proto.h>
#include <asm/omap_common.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
#include <asm/omap_gpio.h>
#include <asm/io.h>
@@ -40,7 +40,7 @@
struct vcores_data const **omap_vcores =
(struct vcores_data const **) OMAP_SRAM_SCRATCH_VCORES_PTR;
struct omap_sys_ctrl_regs const **ctrl =
- (struct omap_sys_ctrl_regs const **)OMAP4_SRAM_SCRATCH_SYS_CTRL;
+ (struct omap_sys_ctrl_regs const **)OMAP_SRAM_SCRATCH_SYS_CTRL;
/*
* The M & N values in the following tables are created using the
@@ -219,6 +219,9 @@
.step = 12660, /* 12.66 mV represented in uV */
/* The code starts at 1 not 0 */
.start_code = 1,
+ .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR,
+ .pmic_bus_init = sri2c_init,
+ .pmic_write = omap_vc_bypass_send_value,
};
struct pmic_data twl6030 = {
@@ -226,6 +229,9 @@
.step = 12660, /* 12.66 mV represented in uV */
/* The code starts at 1 not 0 */
.start_code = 1,
+ .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR,
+ .pmic_bus_init = sri2c_init,
+ .pmic_write = omap_vc_bypass_send_value,
};
struct pmic_data tps62361 = {
@@ -233,7 +239,10 @@
.step = 10000, /* 10 mV represented in uV */
.start_code = 0,
.gpio = TPS62361_VSEL0_GPIO,
- .gpio_en = 1
+ .gpio_en = 1,
+ .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR,
+ .pmic_bus_init = sri2c_init,
+ .pmic_write = omap_vc_bypass_send_value,
};
struct vcores_data omap4430_volts_es1 = {
diff --git a/arch/arm/cpu/armv7/omap4/hwinit.c b/arch/arm/cpu/armv7/omap4/hwinit.c
index 2db517b..81f5a48 100644
--- a/arch/arm/cpu/armv7/omap4/hwinit.c
+++ b/arch/arm/cpu/armv7/omap4/hwinit.c
@@ -34,10 +34,11 @@
#include <asm/sizes.h>
#include <asm/emif.h>
#include <asm/arch/gpio.h>
+#include <asm/omap_common.h>
DECLARE_GLOBAL_DATA_PTR;
-u32 *const omap_si_rev = (u32 *)OMAP4_SRAM_SCRATCH_OMAP4_REV;
+u32 *const omap_si_rev = (u32 *)OMAP_SRAM_SCRATCH_OMAP_REV;
static const struct gpio_bank gpio_bank_44xx[6] = {
{ (void *)OMAP44XX_GPIO1_BASE, METHOD_GPIO_24XX },
diff --git a/arch/arm/cpu/armv7/omap4/prcm-regs.c b/arch/arm/cpu/armv7/omap4/prcm-regs.c
index 7225a30..7e71ca0 100644
--- a/arch/arm/cpu/armv7/omap4/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap4/prcm-regs.c
@@ -301,6 +301,8 @@
.control_ldosram_iva_voltage_ctrl = 0x4A002320,
.control_ldosram_mpu_voltage_ctrl = 0x4A002324,
.control_ldosram_core_voltage_ctrl = 0x4A002328,
+ .control_usbotghs_ctrl = 0x4A00233C,
+ .control_padconf_core_base = 0x4A100000,
.control_pbiaslite = 0x4A100600,
.control_lpddr2io1_0 = 0x4A100638,
.control_lpddr2io1_1 = 0x4A10063C,
@@ -312,4 +314,5 @@
.control_lpddr2io2_3 = 0x4A100654,
.control_efuse_1 = 0x4A100700,
.control_efuse_2 = 0x4A100704,
+ .control_padconf_wkup_base = 0x4A31E000,
};
diff --git a/arch/arm/cpu/armv7/omap5/Makefile b/arch/arm/cpu/armv7/omap5/Makefile
index ce00e2c..6ff8dbb 100644
--- a/arch/arm/cpu/armv7/omap5/Makefile
+++ b/arch/arm/cpu/armv7/omap5/Makefile
@@ -30,6 +30,7 @@
COBJS += sdram.o
COBJS += prcm-regs.o
COBJS += hw_data.o
+COBJS += abb.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
diff --git a/arch/arm/cpu/armv7/omap5/abb.c b/arch/arm/cpu/armv7/omap5/abb.c
new file mode 100644
index 0000000..92470be
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap5/abb.c
@@ -0,0 +1,67 @@
+/*
+ *
+ * Adaptive Body Bias programming sequence for OMAP5 family
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * Andrii Tseglytskyi <andrii.tseglytskyi@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/omap_common.h>
+#include <asm/io.h>
+
+/*
+ * Setup LDOVBB for OMAP5.
+ * On OMAP5+ some ABB settings are fused. They are handled
+ * in the following way:
+ *
+ * 1. corresponding EFUSE register contains ABB enable bit
+ * and VSET value
+ * 2. If ABB enable bit is set to 1, than ABB should be
+ * enabled, otherwise ABB should be disabled
+ * 3. If ABB is enabled, than VSET value should be copied
+ * to corresponding MUX control register
+ */
+s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb)
+{
+ u32 vset;
+
+ /*
+ * ABB parameters must be properly fused
+ * otherwise ABB should be disabled
+ */
+ vset = readl(fuse);
+ if (!(vset & OMAP5_ABB_FUSE_ENABLE_MASK))
+ return -1;
+
+ /* prepare VSET value for LDOVBB mux register */
+ vset &= OMAP5_ABB_FUSE_VSET_MASK;
+ vset >>= ffs(OMAP5_ABB_FUSE_VSET_MASK) - 1;
+ vset <<= ffs(OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK) - 1;
+ vset |= OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK;
+
+ /* setup LDOVBB using fused value */
+ clrsetbits_le32(ldovbb, OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK, vset);
+
+ return 0;
+}
diff --git a/arch/arm/cpu/armv7/omap5/emif.c b/arch/arm/cpu/armv7/omap5/emif.c
index 3f37abd..b4c1319 100644
--- a/arch/arm/cpu/armv7/omap5/emif.c
+++ b/arch/arm/cpu/armv7/omap5/emif.c
@@ -32,8 +32,8 @@
#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
#define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg))
-static u32 *const T_num = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_T_NUM;
-static u32 *const T_den = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_T_DEN;
+static u32 *const T_num = (u32 *)OMAP_SRAM_SCRATCH_EMIF_T_NUM;
+static u32 *const T_den = (u32 *)OMAP_SRAM_SCRATCH_EMIF_T_DEN;
#endif
#ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
index ced274e..56cf1f8 100644
--- a/arch/arm/cpu/armv7/omap5/hw_data.c
+++ b/arch/arm/cpu/armv7/omap5/hw_data.c
@@ -26,10 +26,11 @@
* MA 02111-1307 USA
*/
#include <common.h>
+#include <palmas.h>
#include <asm/arch/omap.h>
#include <asm/arch/sys_proto.h>
#include <asm/omap_common.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
#include <asm/omap_gpio.h>
#include <asm/io.h>
#include <asm/emif.h>
@@ -41,7 +42,7 @@
struct vcores_data const **omap_vcores =
(struct vcores_data const **) OMAP_SRAM_SCRATCH_VCORES_PTR;
struct omap_sys_ctrl_regs const **ctrl =
- (struct omap_sys_ctrl_regs const **)OMAP5_SRAM_SCRATCH_SYS_CTRL;
+ (struct omap_sys_ctrl_regs const **)OMAP_SRAM_SCRATCH_SYS_CTRL;
/* OPP HIGH FREQUENCY for ES2.0 */
static const struct dpll_params mpu_dpll_params_1_5ghz[NUM_SYS_CLKS] = {
@@ -99,14 +100,13 @@
};
static const struct dpll_params mpu_dpll_params_1ghz[NUM_SYS_CLKS] = {
- {250, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {119, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
- {625, 11, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
- {500, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {250, 2, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {500, 9, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */
+ {119, 1, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {625, 11, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {500, 12, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {625, 23, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */
- {50, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 20 MHz */
+ {625, 23, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */
};
static const struct dpll_params
@@ -132,15 +132,14 @@
};
static const struct dpll_params
- core_dpll_params_2128mhz_ddr532_dra7xx[NUM_SYS_CLKS] = {
- {266, 2, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 12 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {443, 6, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 16.8 MHz */
- {277, 4, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 19.2 MHz */
- {368, 8, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 26 MHz */
+ core_dpll_params_2128mhz_dra7xx[NUM_SYS_CLKS] = {
+ {266, 2, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 12 MHz */
+ {266, 4, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 20 MHz */
+ {443, 6, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 16.8 MHz */
+ {277, 4, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 19.2 MHz */
+ {368, 8, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 26 MHz */
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {277, 9, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 38.4 MHz */
- {266, 4, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6} /* 20 MHz */
+ {277, 9, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 38.4 MHz */
};
static const struct dpll_params
@@ -186,14 +185,13 @@
};
static const struct dpll_params per_dpll_params_768mhz_dra7xx[NUM_SYS_CLKS] = {
- {32, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 12 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {160, 6, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 16.8 MHz */
- {20, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 19.2 MHz */
- {192, 12, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 26 MHz */
+ {32, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 12 MHz */
+ {96, 4, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 20 MHz */
+ {160, 6, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 16.8 MHz */
+ {20, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 19.2 MHz */
+ {192, 12, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 26 MHz */
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {10, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 38.4 MHz */
- {96, 4, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1} /* 20 MHz */
+ {10, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 38.4 MHz */
};
static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = {
@@ -206,6 +204,16 @@
{91, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
};
+static const struct dpll_params iva_dpll_params_2330mhz_dra7xx[NUM_SYS_CLKS] = {
+ {1165, 11, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {233, 3, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */
+ {208, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {182, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {224, 4, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {91, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */
+};
+
/* ABE M & N values with sys_clk as source */
static const struct dpll_params
abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = {
@@ -223,26 +231,36 @@
750, 0, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1
};
+/* ABE M & N values with sysclk2(22.5792 MHz) as input */
+static const struct dpll_params
+ abe_dpll_params_sysclk2_361267khz[NUM_SYS_CLKS] = {
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {16, 1, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */
+};
+
static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
{400, 4, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {480, 9, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */
{400, 6, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
{400, 7, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
{480, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
{400, 15, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */
- {48, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 20 MHz */
};
-static const struct dpll_params ddr_dpll_params_1066mhz[NUM_SYS_CLKS] = {
- {533, 11, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {222, 6, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
- {111, 3, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
- {41, 1, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
+static const struct dpll_params ddr_dpll_params_2128mhz[NUM_SYS_CLKS] = {
+ {266, 2, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {266, 4, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */
+ {190, 2, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {665, 11, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {532, 12, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {347, 24, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */
- {533, 19, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1} /* 20 MHz */
+ {665, 23, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */
};
struct dplls omap5_dplls_es1 = {
@@ -275,10 +293,12 @@
struct dplls dra7xx_dplls = {
.mpu = mpu_dpll_params_1ghz,
- .core = core_dpll_params_2128mhz_ddr532_dra7xx,
+ .core = core_dpll_params_2128mhz_dra7xx,
.per = per_dpll_params_768mhz_dra7xx,
+ .abe = abe_dpll_params_sysclk2_361267khz,
+ .iva = iva_dpll_params_2330mhz_dra7xx,
.usb = usb_dpll_params_1920mhz,
- .ddr = ddr_dpll_params_1066mhz,
+ .ddr = ddr_dpll_params_2128mhz,
};
struct pmic_data palmas = {
@@ -289,6 +309,22 @@
* Offset code 0 switches OFF the SMPS
*/
.start_code = 6,
+ .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR,
+ .pmic_bus_init = sri2c_init,
+ .pmic_write = omap_vc_bypass_send_value,
+};
+
+struct pmic_data tps659038 = {
+ .base_offset = PALMAS_SMPS_BASE_VOLT_UV,
+ .step = 10000, /* 10 mV represented in uV */
+ /*
+ * Offset codes 1-6 all give the base voltage in Palmas
+ * Offset code 0 switches OFF the SMPS
+ */
+ .start_code = 6,
+ .i2c_slave_addr = TPS659038_I2C_SLAVE_ADDR,
+ .pmic_bus_init = gpi2c_init,
+ .pmic_write = palmas_i2c_write_u8,
};
struct vcores_data omap5430_volts = {
@@ -319,6 +355,38 @@
.mm.pmic = &palmas,
};
+struct vcores_data dra752_volts = {
+ .mpu.value = VDD_MPU_DRA752,
+ .mpu.efuse.reg = STD_FUSE_OPP_VMIN_MPU_NOM,
+ .mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .mpu.addr = TPS659038_REG_ADDR_SMPS12_MPU,
+ .mpu.pmic = &tps659038,
+
+ .eve.value = VDD_EVE_DRA752,
+ .eve.efuse.reg = STD_FUSE_OPP_VMIN_DSPEVE_NOM,
+ .eve.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .eve.addr = TPS659038_REG_ADDR_SMPS45_EVE,
+ .eve.pmic = &tps659038,
+
+ .gpu.value = VDD_GPU_DRA752,
+ .gpu.efuse.reg = STD_FUSE_OPP_VMIN_GPU_NOM,
+ .gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .gpu.addr = TPS659038_REG_ADDR_SMPS6_GPU,
+ .gpu.pmic = &tps659038,
+
+ .core.value = VDD_CORE_DRA752,
+ .core.efuse.reg = STD_FUSE_OPP_VMIN_CORE_NOM,
+ .core.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .core.addr = TPS659038_REG_ADDR_SMPS7_CORE,
+ .core.pmic = &tps659038,
+
+ .iva.value = VDD_IVA_DRA752,
+ .iva.efuse.reg = STD_FUSE_OPP_VMIN_IVA_NOM,
+ .iva.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .iva.addr = TPS659038_REG_ADDR_SMPS8_IVA,
+ .iva.pmic = &tps659038,
+};
+
/*
* Enable essential clock domains, modules and
* do some additional special settings needed
@@ -383,12 +451,6 @@
clk_modules_explicit_en_essential,
1);
- /* Select 384Mhz for GPU as its the POR for ES1.0 */
- setbits_le32((*prcm)->cm_sgx_sgx_clkctrl,
- CLKSEL_GPU_HYD_GCLK_MASK);
- setbits_le32((*prcm)->cm_sgx_sgx_clkctrl,
- CLKSEL_GPU_CORE_GCLK_MASK);
-
/* Enable SCRM OPT clocks for PER and CORE dpll */
setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl,
OPTFCLKEN_SCRM_PER_MASK);
@@ -403,6 +465,7 @@
};
u32 const clk_modules_hw_auto_essential[] = {
+ (*prcm)->cm_l3init_hsusbtll_clkctrl,
0
};
@@ -411,7 +474,7 @@
(*prcm)->cm_l4per_i2c2_clkctrl,
(*prcm)->cm_l4per_i2c3_clkctrl,
(*prcm)->cm_l4per_i2c4_clkctrl,
- (*prcm)->cm_l3init_hsusbtll_clkctrl,
+ (*prcm)->cm_l4per_i2c5_clkctrl,
(*prcm)->cm_l3init_hsusbhost_clkctrl,
(*prcm)->cm_l3init_fsusb_clkctrl,
0
@@ -539,6 +602,17 @@
.ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
};
+const struct ctrl_ioregs ioregs_dra7xx_es1 = {
+ .ctrl_ddrch = 0x40404040,
+ .ctrl_lpddr2ch = 0x40404040,
+ .ctrl_ddr3ch = 0x80808080,
+ .ctrl_ddrio_0 = 0xbae8c631,
+ .ctrl_ddrio_1 = 0xb46318d8,
+ .ctrl_ddrio_2 = 0x84210000,
+ .ctrl_emif_sdram_config_ext = 0xb2c00000,
+ .ctrl_ddr_ctrl_ext_0 = 0xA2000000,
+};
+
void hw_data_init(void)
{
u32 omap_rev = omap_revision();
@@ -564,7 +638,7 @@
case DRA752_ES1_0:
*prcm = &dra7xx_prcm;
*dplls_data = &dra7xx_dplls;
- *omap_vcores = &omap5430_volts_es2;
+ *omap_vcores = &dra752_volts;
*ctrl = &dra7xx_ctrl;
break;
@@ -581,14 +655,16 @@
case OMAP5430_ES1_0:
case OMAP5430_ES2_0:
*regs = &ioregs_omap5430;
- break;
+ break;
case OMAP5432_ES1_0:
*regs = &ioregs_omap5432_es1;
- break;
+ break;
case OMAP5432_ES2_0:
- case DRA752_ES1_0:
*regs = &ioregs_omap5432_es2;
- break;
+ break;
+ case DRA752_ES1_0:
+ *regs = &ioregs_dra7xx_es1;
+ break;
default:
printf("\n INVALID OMAP REVISION ");
diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c
index 2f4b247..daf124e 100644
--- a/arch/arm/cpu/armv7/omap5/hwinit.c
+++ b/arch/arm/cpu/armv7/omap5/hwinit.c
@@ -32,15 +32,16 @@
#include <asm/armv7.h>
#include <asm/arch/cpu.h>
#include <asm/arch/sys_proto.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
#include <asm/sizes.h>
#include <asm/utils.h>
#include <asm/arch/gpio.h>
#include <asm/emif.h>
+#include <asm/omap_common.h>
DECLARE_GLOBAL_DATA_PTR;
-u32 *const omap_si_rev = (u32 *)OMAP5_SRAM_SCRATCH_OMAP5_REV;
+u32 *const omap_si_rev = (u32 *)OMAP_SRAM_SCRATCH_OMAP_REV;
static struct gpio_bank gpio_bank_54xx[6] = {
{ (void *)OMAP54XX_GPIO1_BASE, METHOD_GPIO_24XX },
@@ -99,16 +100,21 @@
writel(ioregs->ctrl_emif_sdram_config_ext,
(*ctrl)->control_emif2_sdram_config_ext);
- /* Disable DLL select */
- io_settings = (readl((*ctrl)->control_port_emif1_sdram_config)
+ if (is_omap54xx()) {
+ /* Disable DLL select */
+ io_settings = (readl((*ctrl)->control_port_emif1_sdram_config)
& 0xFFEFFFFF);
- writel(io_settings,
- (*ctrl)->control_port_emif1_sdram_config);
+ writel(io_settings,
+ (*ctrl)->control_port_emif1_sdram_config);
- io_settings = (readl((*ctrl)->control_port_emif2_sdram_config)
+ io_settings = (readl((*ctrl)->control_port_emif2_sdram_config)
& 0xFFEFFFFF);
- writel(io_settings,
- (*ctrl)->control_port_emif2_sdram_config);
+ writel(io_settings,
+ (*ctrl)->control_port_emif2_sdram_config);
+ } else {
+ writel(ioregs->ctrl_ddr_ctrl_ext_0,
+ (*ctrl)->control_ddr_control_ext_0);
+ }
}
/*
@@ -200,6 +206,9 @@
u32 sysclk_ind = get_sys_clk_index();
u32 omap_rev = omap_revision();
+ if (!is_omap54xx())
+ return;
+
mul_factor = srcomp_parameters[sysclk_ind].multiply_factor;
div_factor = srcomp_parameters[sysclk_ind].divide_factor;
@@ -363,3 +372,22 @@
{
return readl((*prcm)->prm_rstst) & PRM_RSTST_WARM_RESET_MASK;
}
+
+void setup_warmreset_time(void)
+{
+ u32 rst_time, rst_val;
+
+#ifndef CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC
+ rst_time = CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC;
+#else
+ rst_time = CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC;
+#endif
+ rst_time = usec_to_32k(rst_time) << RSTTIME1_SHIFT;
+
+ if (rst_time > RSTTIME1_MASK)
+ rst_time = RSTTIME1_MASK;
+
+ rst_val = readl((*prcm)->prm_rsttime) & ~RSTTIME1_MASK;
+ rst_val |= rst_time;
+ writel(rst_val, (*prcm)->prm_rsttime);
+}
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c
index b8a61fe..e839ff5 100644
--- a/arch/arm/cpu/armv7/omap5/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
@@ -298,6 +298,7 @@
.cm_wkupaon_io_srcomp_clkctrl = 0x4ae07898,
.prm_rstctrl = 0x4ae07b00,
.prm_rstst = 0x4ae07b04,
+ .prm_rsttime = 0x4ae07b08,
.prm_vc_val_bypass = 0x4ae07ba0,
.prm_vc_cfg_i2c_mode = 0x4ae07bb4,
.prm_vc_cfg_i2c_clk = 0x4ae07bb8,
@@ -307,10 +308,16 @@
.prm_sldo_mpu_ctrl = 0x4ae07bd0,
.prm_sldo_mm_setup = 0x4ae07bd4,
.prm_sldo_mm_ctrl = 0x4ae07bd8,
+
+ /* SCRM stuff, used by some boards */
+ .scrm_auxclk0 = 0x4ae0a310,
+ .scrm_auxclk1 = 0x4ae0a314,
};
struct omap_sys_ctrl_regs const omap5_ctrl = {
.control_status = 0x4A002134,
+ .control_std_fuse_opp_vdd_mpu_2 = 0x4A0021B4,
+ .control_padconf_core_base = 0x4A002800,
.control_paconf_global = 0x4A002DA0,
.control_paconf_mode = 0x4A002DA4,
.control_smart1io_padconf_0 = 0x4A002DA8,
@@ -358,6 +365,8 @@
.control_port_emif2_sdram_config = 0x4AE0C118,
.control_emif1_sdram_config_ext = 0x4AE0C144,
.control_emif2_sdram_config_ext = 0x4AE0C148,
+ .control_wkup_ldovbb_mpu_voltage_ctrl = 0x4AE0C318,
+ .control_padconf_wkup_base = 0x4AE0C800,
.control_smart1nopmio_padconf_0 = 0x4AE0CDA0,
.control_smart1nopmio_padconf_1 = 0x4AE0CDA4,
.control_padconf_mode = 0x4AE0CDA8,
@@ -434,6 +443,7 @@
.control_srcomp_east_side = 0x4A002E7C,
.control_srcomp_west_side = 0x4A002E80,
.control_srcomp_code_latch = 0x4A002E84,
+ .control_ddr_control_ext_0 = 0x4A002E88,
.control_padconf_core_base = 0x4A003400,
.control_port_emif1_sdram_config = 0x4AE0C110,
.control_port_emif1_lpddr2_nvm_config = 0x4AE0C114,
@@ -709,6 +719,9 @@
.cm_l3init_fsusb_clkctrl = 0x4a0096d0,
.cm_l3init_ocp2scp1_clkctrl = 0x4a0096e0,
+ /* prm irqstatus regs */
+ .prm_irqstatus_mpu_2 = 0x4ae06014,
+
/* l4 wkup regs */
.cm_abe_pll_ref_clksel = 0x4ae0610c,
.cm_sys_clksel = 0x4ae06110,
@@ -729,6 +742,7 @@
.cm_wkupaon_io_srcomp_clkctrl = 0x4ae07998,
.prm_rstctrl = 0x4ae07c00,
.prm_rstst = 0x4ae07c04,
+ .prm_rsttime = 0x4ae07c08,
.prm_vc_val_bypass = 0x4ae07ca0,
.prm_vc_cfg_i2c_mode = 0x4ae07cb4,
.prm_vc_cfg_i2c_clk = 0x4ae07cb8,
@@ -739,6 +753,12 @@
.prm_sldo_mpu_ctrl = 0x4ae07cd0,
.prm_sldo_mm_setup = 0x4ae07cd4,
.prm_sldo_mm_ctrl = 0x4ae07cd8,
+ .prm_abbldo_mpu_setup = 0x4ae07cdc,
+ .prm_abbldo_mpu_ctrl = 0x4ae07ce0,
+
+ /* SCRM stuff, used by some boards */
+ .scrm_auxclk0 = 0x4ae0a310,
+ .scrm_auxclk1 = 0x4ae0a314,
};
struct prcm_regs const dra7xx_prcm = {
@@ -940,6 +960,7 @@
/* l4 wkup regs */
.cm_abe_pll_ref_clksel = 0x4ae0610c,
.cm_sys_clksel = 0x4ae06110,
+ .cm_abe_pll_sys_clksel = 0x4ae06118,
.cm_wkup_clkstctrl = 0x4ae07800,
.cm_wkup_l4wkup_clkctrl = 0x4ae07820,
.cm_wkup_wdtimer1_clkctrl = 0x4ae07828,
@@ -952,6 +973,7 @@
.cm_wkupaon_scrm_clkctrl = 0x4ae07890,
.prm_rstctrl = 0x4ae07d00,
.prm_rstst = 0x4ae07d04,
+ .prm_rsttime = 0x4ae07d08,
.prm_vc_val_bypass = 0x4ae07da0,
.prm_vc_cfg_i2c_mode = 0x4ae07db4,
.prm_vc_cfg_i2c_clk = 0x4ae07db8,
diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c
index 6b461e4..1b445a6 100644
--- a/arch/arm/cpu/armv7/omap5/sdram.c
+++ b/arch/arm/cpu/armv7/omap5/sdram.c
@@ -108,6 +108,7 @@
const struct emif_regs emif_regs_ddr3_532_mhz_1cs = {
.sdram_config_init = 0x61851B32,
.sdram_config = 0x61851B32,
+ .sdram_config2 = 0x0,
.ref_ctrl = 0x00001035,
.sdram_tim1 = 0xCCCF36B3,
.sdram_tim2 = 0x308F7FDA,
@@ -131,6 +132,7 @@
const struct emif_regs emif_regs_ddr3_532_mhz_1cs_es2 = {
.sdram_config_init = 0x61851B32,
.sdram_config = 0x61851B32,
+ .sdram_config2 = 0x0,
.ref_ctrl = 0x00001035,
.sdram_tim1 = 0xCCCF36B3,
.sdram_tim2 = 0x308F7FDA,
@@ -151,6 +153,54 @@
.emif_rd_wr_exec_thresh = 0x40000305
};
+const struct emif_regs emif_1_regs_ddr3_532_mhz_1cs_dra_es1 = {
+ .sdram_config_init = 0x61851ab2,
+ .sdram_config = 0x61851ab2,
+ .sdram_config2 = 0x08000000,
+ .ref_ctrl = 0x00001035,
+ .sdram_tim1 = 0xCCCF36B3,
+ .sdram_tim2 = 0x308F7FDA,
+ .sdram_tim3 = 0x027F88A8,
+ .read_idle_ctrl = 0x00050000,
+ .zq_config = 0x0007190B,
+ .temp_alert_config = 0x00000000,
+ .emif_ddr_phy_ctlr_1_init = 0x0E20400A,
+ .emif_ddr_phy_ctlr_1 = 0x0E24400A,
+ .emif_ddr_ext_phy_ctrl_1 = 0x04040100,
+ .emif_ddr_ext_phy_ctrl_2 = 0x009E009E,
+ .emif_ddr_ext_phy_ctrl_3 = 0x009E009E,
+ .emif_ddr_ext_phy_ctrl_4 = 0x009E009E,
+ .emif_ddr_ext_phy_ctrl_5 = 0x009E009E,
+ .emif_rd_wr_lvl_rmp_win = 0x00000000,
+ .emif_rd_wr_lvl_rmp_ctl = 0x80000000,
+ .emif_rd_wr_lvl_ctl = 0x00000000,
+ .emif_rd_wr_exec_thresh = 0x00000305
+};
+
+const struct emif_regs emif_2_regs_ddr3_532_mhz_1cs_dra_es1 = {
+ .sdram_config_init = 0x61851B32,
+ .sdram_config = 0x61851B32,
+ .sdram_config2 = 0x08000000,
+ .ref_ctrl = 0x00001035,
+ .sdram_tim1 = 0xCCCF36B3,
+ .sdram_tim2 = 0x308F7FDA,
+ .sdram_tim3 = 0x027F88A8,
+ .read_idle_ctrl = 0x00050000,
+ .zq_config = 0x0007190B,
+ .temp_alert_config = 0x00000000,
+ .emif_ddr_phy_ctlr_1_init = 0x0020400A,
+ .emif_ddr_phy_ctlr_1 = 0x0E24400A,
+ .emif_ddr_ext_phy_ctrl_1 = 0x04040100,
+ .emif_ddr_ext_phy_ctrl_2 = 0x009D009D,
+ .emif_ddr_ext_phy_ctrl_3 = 0x009D009D,
+ .emif_ddr_ext_phy_ctrl_4 = 0x009D009D,
+ .emif_ddr_ext_phy_ctrl_5 = 0x009D009D,
+ .emif_rd_wr_lvl_rmp_win = 0x00000000,
+ .emif_rd_wr_lvl_rmp_ctl = 0x80000000,
+ .emif_rd_wr_lvl_ctl = 0x00000000,
+ .emif_rd_wr_exec_thresh = 0x00000305
+};
+
const struct dmm_lisa_map_regs lisa_map_4G_x_2_x_2 = {
.dmm_lisa_map_0 = 0x0,
.dmm_lisa_map_1 = 0x0,
@@ -159,11 +209,39 @@
.is_ma_present = 0x1
};
-const struct dmm_lisa_map_regs lisa_map_512M_x_1 = {
+/*
+ * DRA752 EVM board has 1.5 GB of memory
+ * EMIF1 --> 2Gb * 2 = 512MB
+ * EMIF2 --> 2Gb * 4 = 1GB
+ * so mapping 1GB interleaved and 512MB non-interleaved
+ */
+const struct dmm_lisa_map_regs lisa_map_2G_x_2_x_2_2G_x_1_x_2 = {
+ .dmm_lisa_map_0 = 0x0,
+ .dmm_lisa_map_1 = 0x80640300,
+ .dmm_lisa_map_2 = 0xC0500220,
+ .dmm_lisa_map_3 = 0xFF020100,
+ .is_ma_present = 0x1
+};
+
+/*
+ * DRA752 EVM EMIF1 ONLY CONFIGURATION
+ */
+const struct dmm_lisa_map_regs lisa_map_2G_x_1_x_2 = {
.dmm_lisa_map_0 = 0x0,
.dmm_lisa_map_1 = 0x0,
- .dmm_lisa_map_2 = 0x0,
- .dmm_lisa_map_3 = 0x80500100,
+ .dmm_lisa_map_2 = 0x80500100,
+ .dmm_lisa_map_3 = 0xFF020100,
+ .is_ma_present = 0x1
+};
+
+/*
+ * DRA752 EVM EMIF2 ONLY CONFIGURATION
+ */
+const struct dmm_lisa_map_regs lisa_map_2G_x_2_x_2 = {
+ .dmm_lisa_map_0 = 0x0,
+ .dmm_lisa_map_1 = 0x0,
+ .dmm_lisa_map_2 = 0x80600200,
+ .dmm_lisa_map_3 = 0xFF020100,
.is_ma_present = 0x1
};
@@ -180,9 +258,20 @@
*regs = &emif_regs_532_mhz_2cs_es2;
break;
case OMAP5432_ES2_0:
- case DRA752_ES1_0:
- default:
*regs = &emif_regs_ddr3_532_mhz_1cs_es2;
+ break;
+ case DRA752_ES1_0:
+ switch (emif_nr) {
+ case 1:
+ *regs = &emif_1_regs_ddr3_532_mhz_1cs_dra_es1;
+ break;
+ case 2:
+ *regs = &emif_2_regs_ddr3_532_mhz_1cs_dra_es1;
+ break;
+ }
+ break;
+ default:
+ *regs = &emif_1_regs_ddr3_532_mhz_1cs_dra_es1;
}
}
@@ -201,7 +290,7 @@
break;
case DRA752_ES1_0:
default:
- *dmm_lisa_regs = &lisa_map_512M_x_1;
+ *dmm_lisa_regs = &lisa_map_2G_x_2_x_2_2G_x_1_x_2;
}
}
@@ -252,7 +341,8 @@
0x00000000,
0x00000000,
0x00000000,
- 0x00000077
+ 0x00000077,
+ 0x0
};
const u32 ddr3_ext_phy_ctrl_const_base_es1[EMIF_EXT_PHY_CTRL_CONST_REG] = {
@@ -274,7 +364,8 @@
0x00000000,
0x00000000,
0x00000000,
- 0x00000057
+ 0x00000057,
+ 0x0
};
const u32 ddr3_ext_phy_ctrl_const_base_es2[EMIF_EXT_PHY_CTRL_CONST_REG] = {
@@ -296,7 +387,56 @@
0x00000000,
0x00000000,
0x00000000,
- 0x00000057
+ 0x00000057,
+ 0x0
+};
+
+const u32
+dra_ddr3_ext_phy_ctrl_const_base_es1_emif1[EMIF_EXT_PHY_CTRL_CONST_REG] = {
+ 0x009E009E,
+ 0x002E002E,
+ 0x002E002E,
+ 0x002E002E,
+ 0x002E002E,
+ 0x002E002E,
+ 0x004D004D,
+ 0x004D004D,
+ 0x004D004D,
+ 0x004D004D,
+ 0x004D004D,
+ 0x004D004D,
+ 0x004D004D,
+ 0x004D004D,
+ 0x004D004D,
+ 0x004D004D,
+ 0x0,
+ 0x600020,
+ 0x40010080,
+ 0x8102040
+};
+
+const u32
+dra_ddr3_ext_phy_ctrl_const_base_es1_emif2[EMIF_EXT_PHY_CTRL_CONST_REG] = {
+ 0x009D009D,
+ 0x002D002D,
+ 0x002D002D,
+ 0x002D002D,
+ 0x002D002D,
+ 0x002D002D,
+ 0x00570057,
+ 0x00570057,
+ 0x00570057,
+ 0x00570057,
+ 0x00570057,
+ 0x00570057,
+ 0x00570057,
+ 0x00570057,
+ 0x00570057,
+ 0x00570057,
+ 0x0,
+ 0x600020,
+ 0x40010080,
+ 0x8102040
};
const struct lpddr2_mr_regs mr_regs = {
@@ -307,7 +447,7 @@
.mr16 = MR16_REF_FULL_ARRAY
};
-static void emif_get_ext_phy_ctrl_const_regs(const u32 **regs)
+static void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr, const u32 **regs)
{
switch (omap_revision()) {
case OMAP5430_ES1_0:
@@ -318,7 +458,14 @@
*regs = ddr3_ext_phy_ctrl_const_base_es1;
break;
case OMAP5432_ES2_0:
+ *regs = ddr3_ext_phy_ctrl_const_base_es2;
+ break;
case DRA752_ES1_0:
+ if (emif_nr == 1)
+ *regs = dra_ddr3_ext_phy_ctrl_const_base_es1_emif1;
+ else
+ *regs = dra_ddr3_ext_phy_ctrl_const_base_es1_emif2;
+ break;
default:
*regs = ddr3_ext_phy_ctrl_const_base_es2;
@@ -334,9 +481,12 @@
{
u32 *ext_phy_ctrl_base = 0;
u32 *emif_ext_phy_ctrl_base = 0;
+ u32 emif_nr;
const u32 *ext_phy_ctrl_const_regs;
u32 i = 0;
+ emif_nr = (base == EMIF1_BASE) ? 1 : 2;
+
struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
ext_phy_ctrl_base = (u32 *) &(regs->emif_ddr_ext_phy_ctrl_1);
@@ -353,7 +503,7 @@
* external phy 6-24 registers do not change with
* ddr frequency
*/
- emif_get_ext_phy_ctrl_const_regs(&ext_phy_ctrl_const_regs);
+ emif_get_ext_phy_ctrl_const_regs(emif_nr, &ext_phy_ctrl_const_regs);
for (i = 0; i < EMIF_EXT_PHY_CTRL_CONST_REG; i++) {
writel(ext_phy_ctrl_const_regs[i],
emif_ext_phy_ctrl_base++);
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index e9e57e6..8e9cb19 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -94,10 +94,6 @@
_bss_start_ofs:
.word __bss_start - _start
-.globl _image_copy_end_ofs
-_image_copy_end_ofs:
- .word __image_copy_end - _start
-
.globl _bss_end_ofs
_bss_end_ofs:
.word __bss_end - _start
@@ -167,80 +163,6 @@
/*------------------------------------------------------------------------------*/
-#ifndef CONFIG_SPL_BUILD
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
-ENTRY(relocate_code)
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-
-relocate_done:
-
- bx lr
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-ENDPROC(relocate_code)
-
-#endif
-
ENTRY(c_runtime_cpu_setup)
/*
* If I-cache is enabled invalidate it
diff --git a/board/cm_t35/Makefile b/arch/arm/cpu/armv7/vf610/Makefile
similarity index 74%
copy from board/cm_t35/Makefile
copy to arch/arm/cpu/armv7/vf610/Makefile
index bde56e6..9232cd4 100644
--- a/board/cm_t35/Makefile
+++ b/arch/arm/cpu/armv7/vf610/Makefile
@@ -1,9 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
+# Copyright 2013 Freescale Semiconductor, Inc.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
@@ -23,17 +19,17 @@
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).o
+LIB = $(obj)lib$(SOC).o
-COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += eeprom.o
-COBJS-$(CONFIG_LCD) += display.o
-
-COBJS := cm_t35.o leds.o $(COBJS-y)
+COBJS += generic.o
+COBJS += timer.o
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
-$(LIB): $(obj).depend $(OBJS)
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
$(call cmd_link_o_target, $(OBJS))
#########################################################################
@@ -42,3 +38,5 @@
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/cpu/armv7/vf610/generic.c b/arch/arm/cpu/armv7/vf610/generic.c
new file mode 100644
index 0000000..87f2a86
--- /dev/null
+++ b/arch/arm/cpu/armv7/vf610/generic.c
@@ -0,0 +1,324 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
+#include <netdev.h>
+#ifdef CONFIG_FSL_ESDHC
+#include <fsl_esdhc.h>
+#endif
+
+#ifdef CONFIG_FSL_ESDHC
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
+#ifdef CONFIG_MXC_OCOTP
+void enable_ocotp_clk(unsigned char enable)
+{
+ struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
+ u32 reg;
+
+ reg = readl(&ccm->ccgr6);
+ if (enable)
+ reg |= CCM_CCGR6_OCOTP_CTRL_MASK;
+ else
+ reg &= ~CCM_CCGR6_OCOTP_CTRL_MASK;
+ writel(reg, &ccm->ccgr6);
+}
+#endif
+
+static u32 get_mcu_main_clk(void)
+{
+ struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
+ u32 ccm_ccsr, ccm_cacrr, armclk_div;
+ u32 sysclk_sel, pll_pfd_sel = 0;
+ u32 freq = 0;
+
+ ccm_ccsr = readl(&ccm->ccsr);
+ sysclk_sel = ccm_ccsr & CCM_CCSR_SYS_CLK_SEL_MASK;
+ sysclk_sel >>= CCM_CCSR_SYS_CLK_SEL_OFFSET;
+
+ ccm_cacrr = readl(&ccm->cacrr);
+ armclk_div = ccm_cacrr & CCM_CACRR_ARM_CLK_DIV_MASK;
+ armclk_div >>= CCM_CACRR_ARM_CLK_DIV_OFFSET;
+ armclk_div += 1;
+
+ switch (sysclk_sel) {
+ case 0:
+ freq = FASE_CLK_FREQ;
+ break;
+ case 1:
+ freq = SLOW_CLK_FREQ;
+ break;
+ case 2:
+ pll_pfd_sel = ccm_ccsr & CCM_CCSR_PLL2_PFD_CLK_SEL_MASK;
+ pll_pfd_sel >>= CCM_CCSR_PLL2_PFD_CLK_SEL_OFFSET;
+ if (pll_pfd_sel == 0)
+ freq = PLL2_MAIN_FREQ;
+ else if (pll_pfd_sel == 1)
+ freq = PLL2_PFD1_FREQ;
+ else if (pll_pfd_sel == 2)
+ freq = PLL2_PFD2_FREQ;
+ else if (pll_pfd_sel == 3)
+ freq = PLL2_PFD3_FREQ;
+ else if (pll_pfd_sel == 4)
+ freq = PLL2_PFD4_FREQ;
+ break;
+ case 3:
+ freq = PLL2_MAIN_FREQ;
+ break;
+ case 4:
+ pll_pfd_sel = ccm_ccsr & CCM_CCSR_PLL1_PFD_CLK_SEL_MASK;
+ pll_pfd_sel >>= CCM_CCSR_PLL1_PFD_CLK_SEL_OFFSET;
+ if (pll_pfd_sel == 0)
+ freq = PLL1_MAIN_FREQ;
+ else if (pll_pfd_sel == 1)
+ freq = PLL1_PFD1_FREQ;
+ else if (pll_pfd_sel == 2)
+ freq = PLL1_PFD2_FREQ;
+ else if (pll_pfd_sel == 3)
+ freq = PLL1_PFD3_FREQ;
+ else if (pll_pfd_sel == 4)
+ freq = PLL1_PFD4_FREQ;
+ break;
+ case 5:
+ freq = PLL3_MAIN_FREQ;
+ break;
+ default:
+ printf("unsupported system clock select\n");
+ }
+
+ return freq / armclk_div;
+}
+
+static u32 get_bus_clk(void)
+{
+ struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
+ u32 ccm_cacrr, busclk_div;
+
+ ccm_cacrr = readl(&ccm->cacrr);
+
+ busclk_div = ccm_cacrr & CCM_CACRR_BUS_CLK_DIV_MASK;
+ busclk_div >>= CCM_CACRR_BUS_CLK_DIV_OFFSET;
+ busclk_div += 1;
+
+ return get_mcu_main_clk() / busclk_div;
+}
+
+static u32 get_ipg_clk(void)
+{
+ struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
+ u32 ccm_cacrr, ipgclk_div;
+
+ ccm_cacrr = readl(&ccm->cacrr);
+
+ ipgclk_div = ccm_cacrr & CCM_CACRR_IPG_CLK_DIV_MASK;
+ ipgclk_div >>= CCM_CACRR_IPG_CLK_DIV_OFFSET;
+ ipgclk_div += 1;
+
+ return get_bus_clk() / ipgclk_div;
+}
+
+static u32 get_uart_clk(void)
+{
+ return get_ipg_clk();
+}
+
+static u32 get_sdhc_clk(void)
+{
+ struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
+ u32 ccm_cscmr1, ccm_cscdr2, sdhc_clk_sel, sdhc_clk_div;
+ u32 freq = 0;
+
+ ccm_cscmr1 = readl(&ccm->cscmr1);
+ sdhc_clk_sel = ccm_cscmr1 & CCM_CSCMR1_ESDHC1_CLK_SEL_MASK;
+ sdhc_clk_sel >>= CCM_CSCMR1_ESDHC1_CLK_SEL_OFFSET;
+
+ ccm_cscdr2 = readl(&ccm->cscdr2);
+ sdhc_clk_div = ccm_cscdr2 & CCM_CSCDR2_ESDHC1_CLK_DIV_MASK;
+ sdhc_clk_div >>= CCM_CSCDR2_ESDHC1_CLK_DIV_OFFSET;
+ sdhc_clk_div += 1;
+
+ switch (sdhc_clk_sel) {
+ case 0:
+ freq = PLL3_MAIN_FREQ;
+ break;
+ case 1:
+ freq = PLL3_PFD3_FREQ;
+ break;
+ case 2:
+ freq = PLL1_PFD3_FREQ;
+ break;
+ case 3:
+ freq = get_bus_clk();
+ break;
+ }
+
+ return freq / sdhc_clk_div;
+}
+
+u32 get_fec_clk(void)
+{
+ struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
+ u32 ccm_cscmr2, rmii_clk_sel;
+ u32 freq = 0;
+
+ ccm_cscmr2 = readl(&ccm->cscmr2);
+ rmii_clk_sel = ccm_cscmr2 & CCM_CSCMR2_RMII_CLK_SEL_MASK;
+ rmii_clk_sel >>= CCM_CSCMR2_RMII_CLK_SEL_OFFSET;
+
+ switch (rmii_clk_sel) {
+ case 0:
+ freq = ENET_EXTERNAL_CLK;
+ break;
+ case 1:
+ freq = AUDIO_EXTERNAL_CLK;
+ break;
+ case 2:
+ freq = PLL5_MAIN_FREQ;
+ break;
+ case 3:
+ freq = PLL5_MAIN_FREQ / 2;
+ break;
+ }
+
+ return freq;
+}
+
+unsigned int mxc_get_clock(enum mxc_clock clk)
+{
+ switch (clk) {
+ case MXC_ARM_CLK:
+ return get_mcu_main_clk();
+ case MXC_BUS_CLK:
+ return get_bus_clk();
+ case MXC_IPG_CLK:
+ return get_ipg_clk();
+ case MXC_UART_CLK:
+ return get_uart_clk();
+ case MXC_ESDHC_CLK:
+ return get_sdhc_clk();
+ case MXC_FEC_CLK:
+ return get_fec_clk();
+ default:
+ break;
+ }
+ return -1;
+}
+
+/* Dump some core clocks */
+int do_vf610_showclocks(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ printf("\n");
+ printf("cpu clock : %8d MHz\n", mxc_get_clock(MXC_ARM_CLK) / 1000000);
+ printf("bus clock : %8d MHz\n", mxc_get_clock(MXC_BUS_CLK) / 1000000);
+ printf("ipg clock : %8d MHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000000);
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ clocks, CONFIG_SYS_MAXARGS, 1, do_vf610_showclocks,
+ "display clocks",
+ ""
+);
+
+#ifdef CONFIG_FEC_MXC
+void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
+{
+ struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+ struct fuse_bank *bank = &ocotp->bank[4];
+ struct fuse_bank4_regs *fuse =
+ (struct fuse_bank4_regs *)bank->fuse_regs;
+
+ u32 value = readl(&fuse->mac_addr0);
+ mac[0] = (value >> 8);
+ mac[1] = value;
+
+ value = readl(&fuse->mac_addr1);
+ mac[2] = value >> 24;
+ mac[3] = value >> 16;
+ mac[4] = value >> 8;
+ mac[5] = value;
+}
+#endif
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+static char *get_reset_cause(void)
+{
+ u32 cause;
+ struct src *src_regs = (struct src *)SRC_BASE_ADDR;
+
+ cause = readl(&src_regs->srsr);
+ writel(cause, &src_regs->srsr);
+ cause &= 0xff;
+
+ switch (cause) {
+ case 0x08:
+ return "WDOG";
+ case 0x20:
+ return "JTAG HIGH-Z";
+ case 0x80:
+ return "EXTERNAL RESET";
+ case 0xfd:
+ return "POR";
+ default:
+ return "unknown reset";
+ }
+}
+
+int print_cpuinfo(void)
+{
+ printf("CPU: Freescale Vybrid VF610 at %d MHz\n",
+ mxc_get_clock(MXC_ARM_CLK) / 1000000);
+ printf("Reset cause: %s\n", get_reset_cause());
+
+ return 0;
+}
+#endif
+
+int cpu_eth_init(bd_t *bis)
+{
+ int rc = -ENODEV;
+
+#if defined(CONFIG_FEC_MXC)
+ rc = fecmxc_initialize(bis);
+#endif
+
+ return rc;
+}
+
+#ifdef CONFIG_FSL_ESDHC
+int cpu_mmc_init(bd_t *bis)
+{
+ return fsl_esdhc_mmc_init(bis);
+}
+#endif
+
+int get_clocks(void)
+{
+#ifdef CONFIG_FSL_ESDHC
+ gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+#endif
+ return 0;
+}
diff --git a/arch/arm/cpu/armv7/vf610/timer.c b/arch/arm/cpu/armv7/vf610/timer.c
new file mode 100644
index 0000000..f8fbed7
--- /dev/null
+++ b/arch/arm/cpu/armv7/vf610/timer.c
@@ -0,0 +1,103 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <div64.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+
+static struct pit_reg *cur_pit = (struct pit_reg *)PIT_BASE_ADDR;
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define TIMER_LOAD_VAL 0xffffffff
+
+static inline unsigned long long tick_to_time(unsigned long long tick)
+{
+ tick *= CONFIG_SYS_HZ;
+ do_div(tick, mxc_get_clock(MXC_IPG_CLK));
+
+ return tick;
+}
+
+static inline unsigned long long us_to_tick(unsigned long long usec)
+{
+ usec = usec * mxc_get_clock(MXC_IPG_CLK) + 999999;
+ do_div(usec, 1000000);
+
+ return usec;
+}
+
+int timer_init(void)
+{
+ __raw_writel(0, &cur_pit->mcr);
+
+ __raw_writel(TIMER_LOAD_VAL, &cur_pit->ldval1);
+ __raw_writel(0, &cur_pit->tctrl1);
+ __raw_writel(1, &cur_pit->tctrl1);
+
+ gd->arch.tbl = 0;
+ gd->arch.tbu = 0;
+
+ return 0;
+}
+
+unsigned long long get_ticks(void)
+{
+ ulong now = TIMER_LOAD_VAL - __raw_readl(&cur_pit->cval1);
+
+ /* increment tbu if tbl has rolled over */
+ if (now < gd->arch.tbl)
+ gd->arch.tbu++;
+ gd->arch.tbl = now;
+
+ return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl;
+}
+
+ulong get_timer_masked(void)
+{
+ return tick_to_time(get_ticks());
+}
+
+ulong get_timer(ulong base)
+{
+ return get_timer_masked() - base;
+}
+
+/* delay x useconds AND preserve advance timstamp value */
+void __udelay(unsigned long usec)
+{
+ unsigned long long start;
+ ulong tmo;
+
+ start = get_ticks(); /* get current timestamp */
+ tmo = us_to_tick(usec); /* convert usecs to ticks */
+ while ((get_ticks() - start) < tmo)
+ ; /* loop till time has passed */
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+ return mxc_get_clock(MXC_IPG_CLK);
+}
diff --git a/arch/arm/cpu/armv7/zynq/slcr.c b/arch/arm/cpu/armv7/zynq/slcr.c
index 788a8fd..52048c6 100644
--- a/arch/arm/cpu/armv7/zynq/slcr.c
+++ b/arch/arm/cpu/armv7/zynq/slcr.c
@@ -28,6 +28,9 @@
#define SLCR_LOCK_MAGIC 0x767B
#define SLCR_UNLOCK_MAGIC 0xDF0D
+#define SLCR_IDCODE_MASK 0x1F000
+#define SLCR_IDCODE_SHIFT 12
+
static int slcr_lock = 1; /* 1 means locked, 0 means unlocked */
void zynq_slcr_lock(void)
@@ -61,3 +64,61 @@
writel(1, &slcr_base->pss_rst_ctrl);
}
+
+/* Setup clk for network */
+void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk)
+{
+ zynq_slcr_unlock();
+
+ if (gem_id > 1) {
+ printf("Non existing GEM id %d\n", gem_id);
+ goto out;
+ }
+
+ if (gem_id) {
+ /* Set divisors for appropriate frequency in GEM_CLK_CTRL */
+ writel(clk, &slcr_base->gem1_clk_ctrl);
+ /* Configure GEM_RCLK_CTRL */
+ writel(rclk, &slcr_base->gem1_rclk_ctrl);
+ } else {
+ /* Set divisors for appropriate frequency in GEM_CLK_CTRL */
+ writel(clk, &slcr_base->gem0_clk_ctrl);
+ /* Configure GEM_RCLK_CTRL */
+ writel(rclk, &slcr_base->gem0_rclk_ctrl);
+ }
+
+out:
+ zynq_slcr_lock();
+}
+
+void zynq_slcr_devcfg_disable(void)
+{
+ zynq_slcr_unlock();
+
+ /* Disable AXI interface */
+ writel(0xFFFFFFFF, &slcr_base->fpga_rst_ctrl);
+
+ /* Set Level Shifters DT618760 */
+ writel(0xA, &slcr_base->lvl_shftr_en);
+
+ zynq_slcr_lock();
+}
+
+void zynq_slcr_devcfg_enable(void)
+{
+ zynq_slcr_unlock();
+
+ /* Set Level Shifters DT618760 */
+ writel(0xF, &slcr_base->lvl_shftr_en);
+
+ /* Disable AXI interface */
+ writel(0x0, &slcr_base->fpga_rst_ctrl);
+
+ zynq_slcr_lock();
+}
+
+u32 zynq_slcr_get_idcode(void)
+{
+ return (readl(&slcr_base->pss_idcode) & SLCR_IDCODE_MASK) >>
+ SLCR_IDCODE_SHIFT;
+}
diff --git a/arch/arm/cpu/armv7/zynq/timer.c b/arch/arm/cpu/armv7/zynq/timer.c
index 45b405a..8c4357d 100644
--- a/arch/arm/cpu/armv7/zynq/timer.c
+++ b/arch/arm/cpu/armv7/zynq/timer.c
@@ -44,6 +44,7 @@
#include <common.h>
#include <div64.h>
#include <asm/io.h>
+#include <asm/arch/hardware.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -54,7 +55,7 @@
};
static struct scu_timer *timer_base =
- (struct scu_timer *) CONFIG_SCUTIMER_BASEADDR;
+ (struct scu_timer *)ZYNQ_SCUTIMER_BASEADDR;
#define SCUTIMER_CONTROL_PRESCALER_MASK 0x0000FF00 /* Prescaler */
#define SCUTIMER_CONTROL_PRESCALER_SHIFT 8
@@ -114,15 +115,43 @@
void __udelay(unsigned long usec)
{
- unsigned long long tmp;
- ulong tmo;
+ u32 countticks;
+ u32 timeend;
+ u32 timediff;
+ u32 timenow;
- tmo = usec / (1000000 / CONFIG_SYS_HZ);
- tmp = get_ticks() + tmo; /* Get current timestamp */
+ if (usec == 0)
+ return;
- while (get_ticks() < tmp) { /* Loop till event */
- /* NOP */;
- }
+ countticks = (u32) (((unsigned long long) TIMER_TICK_HZ * usec) /
+ 1000000);
+
+ /* decrementing timer */
+ timeend = readl(&timer_base->counter) - countticks;
+
+#if TIMER_LOAD_VAL != 0xFFFFFFFF
+ /* do not manage multiple overflow */
+ if (countticks >= TIMER_LOAD_VAL)
+ countticks = TIMER_LOAD_VAL - 1;
+#endif
+
+ do {
+ timenow = readl(&timer_base->counter);
+
+ if (timenow >= timeend) {
+ /* normal case */
+ timediff = timenow - timeend;
+ } else {
+ if ((TIMER_LOAD_VAL - timeend + timenow) <=
+ countticks) {
+ /* overflow */
+ timediff = TIMER_LOAD_VAL - timeend + timenow;
+ } else {
+ /* missed the exact match */
+ break;
+ }
+ }
+ } while (timediff > 0);
}
/* Timer without interrupts */
diff --git a/arch/arm/cpu/ixp/config.mk b/arch/arm/cpu/ixp/config.mk
index b02e8af..fd3c29f 100644
--- a/arch/arm/cpu/ixp/config.mk
+++ b/arch/arm/cpu/ixp/config.mk
@@ -31,10 +31,6 @@
PLATFORM_LDFLAGS += -EB
USE_PRIVATE_LIBGCC = yes
-# -fdata-sections triggers "section .bss overlaps section .rel.dyn" linker error
-PLATFORM_RELFLAGS += -ffunction-sections
-LDFLAGS_u-boot += --gc-sections
-
# =========================================================================
#
# Supply options according to compiler version
diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S
index 69ef8aa..46cba0c 100644
--- a/arch/arm/cpu/ixp/start.S
+++ b/arch/arm/cpu/ixp/start.S
@@ -114,10 +114,6 @@
_bss_start_ofs:
.word __bss_start - _start
-.globl _image_copy_end_ofs
-_image_copy_end_ofs:
- .word __image_copy_end - _start
-
.globl _bss_end_ofs
_bss_end_ofs:
.word __bss_end - _start
@@ -257,79 +253,6 @@
/*------------------------------------------------------------------------------*/
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- bx lr
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
diff --git a/arch/arm/cpu/pxa/pxa2xx.c b/arch/arm/cpu/pxa/pxa2xx.c
index 09e8177..f07dc67 100644
--- a/arch/arm/cpu/pxa/pxa2xx.c
+++ b/arch/arm/cpu/pxa/pxa2xx.c
@@ -244,7 +244,7 @@
{
writel(CONFIG_SYS_CKEN, CKEN);
writel(CONFIG_SYS_CCCR, CCCR);
- asm volatile("mcr p14, 0, %0, c6, c0, 0" : : "r"(2));
+ asm volatile("mcr p14, 0, %0, c6, c0, 0" : : "r"(0x0b));
/* enable the 32Khz oscillator for RTC and PowerManager */
writel(OSCC_OON, OSCC);
@@ -284,7 +284,7 @@
writel(readl(CKEN) | CKEN14_I2C, CKEN);
}
-void reset_cpu(ulong ignored) __attribute__((noreturn));
+void __attribute__((weak)) reset_cpu(ulong ignored) __attribute__((noreturn));
void reset_cpu(ulong ignored)
{
diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S
index ada91a6..2e3f65e 100644
--- a/arch/arm/cpu/pxa/start.S
+++ b/arch/arm/cpu/pxa/start.S
@@ -118,10 +118,6 @@
_bss_start_ofs:
.word __bss_start - _start
-.globl _image_copy_end_ofs
-_image_copy_end_ofs:
- .word __image_copy_end - _start
-
.globl _bss_end_ofs
_bss_end_ofs:
.word __bss_end - _start
@@ -171,93 +167,23 @@
bl _main
/*------------------------------------------------------------------------------*/
-#ifndef CONFIG_SPL_BUILD
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
-/* Disable the Dcache RAM lock for stack now */
-#ifdef CONFIG_CPU_PXA25X
- mov r12, lr
- bl cpu_init_crit
- mov lr, r12
-#endif
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- bx lr
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
-#endif
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
+#ifdef CONFIG_CPU_PXA25X
+ /*
+ * Unlock (actually, disable) the cache now that board_init_f
+ * is done. We could do this earlier but we would need to add
+ * a new C runtime hook, whereas c_runtime_cpu_setup already
+ * exists.
+ * As this routine is just a call to cpu_init_crit, let us
+ * tail-optimize and do a simple branch here.
+ */
+ b cpu_init_crit
+#else
bx lr
+#endif
/*
*************************************************************************
diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S
index 7361aa2..78183fc 100644
--- a/arch/arm/cpu/s3c44b0/start.S
+++ b/arch/arm/cpu/s3c44b0/start.S
@@ -80,10 +80,6 @@
_bss_start_ofs:
.word __bss_start - _start
-.globl _image_copy_end_ofs
-_image_copy_end_ofs:
- .word __image_copy_end - _start
-
.globl _bss_end_ofs
_bss_end_ofs:
.word __bss_end - _start
@@ -140,79 +136,6 @@
/*------------------------------------------------------------------------------*/
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- bx lr
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S
index 8a2eafd..30d5a90 100644
--- a/arch/arm/cpu/sa1100/start.S
+++ b/arch/arm/cpu/sa1100/start.S
@@ -90,10 +90,6 @@
_bss_start_ofs:
.word __bss_start - _start
-.globl _image_copy_end_ofs
-_image_copy_end_ofs:
- .word __image_copy_end - _start
-
.globl _bss_end_ofs
_bss_end_ofs:
.word __bss_end - _start
@@ -144,79 +140,6 @@
/*------------------------------------------------------------------------------*/
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- mov pc, lr
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
diff --git a/arch/arm/cpu/tegra-common/ap.c b/arch/arm/cpu/tegra-common/ap.c
index 9b77b2b..9e6d51d 100644
--- a/arch/arm/cpu/tegra-common/ap.c
+++ b/arch/arm/cpu/tegra-common/ap.c
@@ -72,6 +72,7 @@
switch (chip_id) {
case CHIPID_TEGRA20:
switch (sku_id) {
+ case SKU_ID_T20_7:
case SKU_ID_T20:
return TEGRA_SOC_T20;
case SKU_ID_T25SE:
@@ -92,6 +93,7 @@
case CHIPID_TEGRA114:
switch (sku_id) {
case SKU_ID_T114_ENG:
+ case SKU_ID_T114_1:
return TEGRA_SOC_T114;
}
break;
@@ -107,6 +109,10 @@
struct scu_ctlr *scu = (struct scu_ctlr *)NV_PA_ARM_PERIPHBASE;
u32 reg;
+ /* Only enable the SCU on T20/T25 */
+ if (tegra_get_chip() != CHIPID_TEGRA20)
+ return;
+
/* If SCU already setup/enabled, return */
if (readl(&scu->scu_ctrl) & SCU_CTRL_ENABLE)
return;
diff --git a/arch/arm/cpu/tegra-common/clock.c b/arch/arm/cpu/tegra-common/clock.c
index 9156d00..268fb91 100644
--- a/arch/arm/cpu/tegra-common/clock.c
+++ b/arch/arm/cpu/tegra-common/clock.c
@@ -321,17 +321,17 @@
unsigned effective_rate;
int mux_bits, divider_bits, source;
int divider;
+ int xdiv = 0;
/* work out the source clock and set it */
source = get_periph_clock_source(periph_id, parent, &mux_bits,
÷r_bits);
+ divider = find_best_divider(divider_bits, pll_rate[parent],
+ rate, &xdiv);
if (extra_div)
- divider = find_best_divider(divider_bits, pll_rate[parent],
- rate, extra_div);
- else
- divider = clk_get_divider(divider_bits, pll_rate[parent],
- rate);
+ *extra_div = xdiv;
+
assert(divider >= 0);
if (adjust_periph_pll(periph_id, source, mux_bits, divider))
return -1U;
diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile
index 44b6822..9492326 100644
--- a/arch/arm/imx-common/Makefile
+++ b/arch/arm/imx-common/Makefile
@@ -27,10 +27,16 @@
LIB = $(obj)libimx-common.o
+ifeq ($(SOC),$(filter $(SOC),mx25 mx35 mx5 mx6 vf610))
+COBJS-y = iomux-v3.o
+endif
ifeq ($(SOC),$(filter $(SOC),mx5 mx6))
-COBJS-y = iomux-v3.o timer.o cpu.o speed.o
+COBJS-y += timer.o cpu.o speed.o
COBJS-$(CONFIG_I2C_MXC) += i2c-mxv7.o
endif
+ifeq ($(SOC),$(filter $(SOC),mx6 mxs))
+COBJS-y += misc.o
+endif
COBJS-$(CONFIG_CMD_BMODE) += cmd_bmode.o
COBJS-$(CONFIG_CMD_HDMIDETECT) += cmd_hdmidet.o
COBJS := $(sort $(COBJS-y))
@@ -58,8 +64,11 @@
$(OBJTREE)/u-boot-with-spl.imx: $(OBJTREE)/SPL $(OBJTREE)/u-boot.bin
$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SPL_PAD_TO) \
-I binary -O binary $< $(OBJTREE)/spl/u-boot-spl-pad.imx
- cat $(OBJTREE)/spl/u-boot-spl-pad.imx $(OBJTREE)/u-boot.bin > $@
- rm $(OBJTREE)/spl/u-boot-spl-pad.imx
+ $(OBJTREE)/tools/mkimage -A arm -O U-Boot -a $(CONFIG_SYS_TEXT_BASE) \
+ -e $(CONFIG_SYS_TEXT_BASE) -C none -d $(OBJTREE)/u-boot.bin \
+ $(OBJTREE)/u-boot.uim
+ cat $(OBJTREE)/spl/u-boot-spl-pad.imx $(OBJTREE)/u-boot.uim > $@
+ rm $(OBJTREE)/spl/u-boot-spl-pad.imx $(OBJTREE)/u-boot.uim
$(OBJTREE)/u-boot-with-nand-spl.imx: $(OBJTREE)/SPL $(OBJTREE)/u-boot.bin
(echo -ne '\x00\x00\x00\x00\x46\x43\x42\x20\x01' && \
@@ -69,8 +78,11 @@
-I binary -O binary $(OBJTREE)/spl/u-boot-nand-spl.imx \
$(OBJTREE)/spl/u-boot-nand-spl-pad.imx
rm $(OBJTREE)/spl/u-boot-nand-spl.imx
- cat $(OBJTREE)/spl/u-boot-nand-spl-pad.imx $(OBJTREE)/u-boot.bin > $@
- rm $(OBJTREE)/spl/u-boot-nand-spl-pad.imx
+ $(OBJTREE)/tools/mkimage -A arm -O U-Boot -a $(CONFIG_SYS_TEXT_BASE) \
+ -e $(CONFIG_SYS_TEXT_BASE) -C none -d $(OBJTREE)/u-boot.bin \
+ $(OBJTREE)/u-boot.uim
+ cat $(OBJTREE)/spl/u-boot-nand-spl-pad.imx $(OBJTREE)/u-boot.uim > $@
+ rm $(OBJTREE)/spl/u-boot-nand-spl-pad.imx $(OBJTREE)/u-boot.uim
#########################################################################
diff --git a/arch/arm/imx-common/iomux-v3.c b/arch/arm/imx-common/iomux-v3.c
index 08fad78..35880c7 100644
--- a/arch/arm/imx-common/iomux-v3.c
+++ b/arch/arm/imx-common/iomux-v3.c
@@ -30,7 +30,7 @@
/*
* configures a single pad in the iomuxer
*/
-int imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
+void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
{
u32 mux_ctrl_ofs = (pad & MUX_CTRL_OFS_MASK) >> MUX_CTRL_OFS_SHIFT;
u32 mux_mode = (pad & MUX_MODE_MASK) >> MUX_MODE_SHIFT;
@@ -48,24 +48,22 @@
if (sel_input_ofs)
__raw_writel(sel_input, base + sel_input_ofs);
+#ifdef CONFIG_IOMUX_SHARE_CONF_REG
+ if (!(pad_ctrl & NO_PAD_CTRL))
+ __raw_writel((mux_mode << PAD_MUX_MODE_SHIFT) | pad_ctrl,
+ base + pad_ctrl_ofs);
+#else
if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs)
__raw_writel(pad_ctrl, base + pad_ctrl_ofs);
-
- return 0;
+#endif
}
-int imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,
- unsigned count)
+void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,
+ unsigned count)
{
iomux_v3_cfg_t const *p = pad_list;
int i;
- int ret;
- for (i = 0; i < count; i++) {
- ret = imx_iomux_v3_setup_pad(*p);
- if (ret)
- return ret;
- p++;
- }
- return 0;
+ for (i = 0; i < count; i++)
+ imx_iomux_v3_setup_pad(*p++);
}
diff --git a/arch/arm/imx-common/misc.c b/arch/arm/imx-common/misc.c
new file mode 100644
index 0000000..220785c
--- /dev/null
+++ b/arch/arm/imx-common/misc.c
@@ -0,0 +1,84 @@
+/*
+ * Copyright 2013 Stefan Roese <sr@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/imx-common/regs-common.h>
+
+/* 1 second delay should be plenty of time for block reset. */
+#define RESET_MAX_TIMEOUT 1000000
+
+#define MXS_BLOCK_SFTRST (1 << 31)
+#define MXS_BLOCK_CLKGATE (1 << 30)
+
+int mxs_wait_mask_set(struct mxs_register_32 *reg, uint32_t mask, unsigned
+ int timeout)
+{
+ while (--timeout) {
+ if ((readl(®->reg) & mask) == mask)
+ break;
+ udelay(1);
+ }
+
+ return !timeout;
+}
+
+int mxs_wait_mask_clr(struct mxs_register_32 *reg, uint32_t mask, unsigned
+ int timeout)
+{
+ while (--timeout) {
+ if ((readl(®->reg) & mask) == 0)
+ break;
+ udelay(1);
+ }
+
+ return !timeout;
+}
+
+int mxs_reset_block(struct mxs_register_32 *reg)
+{
+ /* Clear SFTRST */
+ writel(MXS_BLOCK_SFTRST, ®->reg_clr);
+
+ if (mxs_wait_mask_clr(reg, MXS_BLOCK_SFTRST, RESET_MAX_TIMEOUT))
+ return 1;
+
+ /* Clear CLKGATE */
+ writel(MXS_BLOCK_CLKGATE, ®->reg_clr);
+
+ /* Set SFTRST */
+ writel(MXS_BLOCK_SFTRST, ®->reg_set);
+
+ /* Wait for CLKGATE being set */
+ if (mxs_wait_mask_set(reg, MXS_BLOCK_CLKGATE, RESET_MAX_TIMEOUT))
+ return 1;
+
+ /* Clear SFTRST */
+ writel(MXS_BLOCK_SFTRST, ®->reg_clr);
+
+ if (mxs_wait_mask_clr(reg, MXS_BLOCK_SFTRST, RESET_MAX_TIMEOUT))
+ return 1;
+
+ /* Clear CLKGATE */
+ writel(MXS_BLOCK_CLKGATE, ®->reg_clr);
+
+ if (mxs_wait_mask_clr(reg, MXS_BLOCK_CLKGATE, RESET_MAX_TIMEOUT))
+ return 1;
+
+ return 0;
+}
diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
index fb4e78e..bb53a6a 100644
--- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h
+++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
@@ -117,6 +117,23 @@
#define MT41J512M8RH125_PHY_WR_DATA 0x74
#define MT41J512M8RH125_IOCTRL_VALUE 0x18B
+/* Samsung K4B2G1646E-BIH9 */
+#define K4B2G1646EBIH9_EMIF_READ_LATENCY 0x06
+#define K4B2G1646EBIH9_EMIF_TIM1 0x0888A39B
+#define K4B2G1646EBIH9_EMIF_TIM2 0x2A04011A
+#define K4B2G1646EBIH9_EMIF_TIM3 0x501F820F
+#define K4B2G1646EBIH9_EMIF_SDCFG 0x61C24AB2
+#define K4B2G1646EBIH9_EMIF_SDREF 0x0000093B
+#define K4B2G1646EBIH9_ZQ_CFG 0x50074BE4
+#define K4B2G1646EBIH9_DLL_LOCK_DIFF 0x1
+#define K4B2G1646EBIH9_RATIO 0x40
+#define K4B2G1646EBIH9_INVERT_CLKOUT 0x1
+#define K4B2G1646EBIH9_RD_DQS 0x3B
+#define K4B2G1646EBIH9_WR_DQS 0x85
+#define K4B2G1646EBIH9_PHY_FIFO_WE 0x100
+#define K4B2G1646EBIH9_PHY_WR_DATA 0xC1
+#define K4B2G1646EBIH9_IOCTRL_VALUE 0x18B
+
/**
* Configure DMM
*/
diff --git a/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h b/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h
index a950ac3..8f9315c 100644
--- a/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h
+++ b/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h
@@ -29,6 +29,7 @@
/* Control Module Base Address */
#define CTRL_BASE 0x48140000
+#define CTRL_DEVICE_BASE 0x48140600
/* PRCM Base Address */
#define PRCM_BASE 0x48180000
diff --git a/arch/arm/include/asm/arch-am33xx/omap.h b/arch/arm/include/asm/arch-am33xx/omap.h
index d28f9a8..e7576c1 100644
--- a/arch/arm/include/asm/arch-am33xx/omap.h
+++ b/arch/arm/include/asm/arch-am33xx/omap.h
@@ -29,35 +29,12 @@
* at 0x40304000(EMU base) so that our code works for both EMU and GP
*/
#ifdef CONFIG_AM33XX
-#define NON_SECURE_SRAM_START 0x40304000
-#define NON_SECURE_SRAM_END 0x4030E000
+#define NON_SECURE_SRAM_START 0x402F0400
+#define NON_SECURE_SRAM_END 0x40310000
+#define SRAM_SCRATCH_SPACE_ADDR 0x4030C000
#elif defined(CONFIG_TI814X)
#define NON_SECURE_SRAM_START 0x40300000
#define NON_SECURE_SRAM_END 0x40320000
-#endif
-
-/* ROM code defines */
-/* Boot device */
-#define BOOT_DEVICE_MASK 0xFF
-#define BOOT_DEVICE_OFFSET 0x8
-#define DEV_DESC_PTR_OFFSET 0x4
-#define DEV_DATA_PTR_OFFSET 0x18
-#define BOOT_MODE_OFFSET 0x8
-#define RESET_REASON_OFFSET 0x9
-#define CH_FLAGS_OFFSET 0xA
-
-#define CH_FLAGS_CHSETTINGS (0x1 << 0)
-#define CH_FLAGS_CHRAM (0x1 << 1)
-#define CH_FLAGS_CHFLASH (0x1 << 2)
-#define CH_FLAGS_CHMMCSD (0x1 << 3)
-
-#ifndef __ASSEMBLY__
-struct omap_boot_parameters {
- char *boot_message;
- unsigned int mem_boot_descriptor;
- unsigned char omap_bootdevice;
- unsigned char reset_reason;
- unsigned char ch_flags;
-};
+#define SRAM_SCRATCH_SPACE_ADDR 0x4031B800
#endif
#endif
diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h
index c913b5f..fedc674 100644
--- a/arch/arm/include/asm/arch-am33xx/sys_proto.h
+++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h
@@ -30,6 +30,7 @@
extern struct ctrl_stat *cstat;
u32 get_device_type(void);
+void save_omap_boot_params(void);
void setup_clocks_for_console(void);
void ddr_pll_config(unsigned int ddrpll_M);
diff --git a/arch/arm/include/asm/arch-at91/at91_common.h b/arch/arm/include/asm/arch-at91/at91_common.h
index 8282f46..5843935 100644
--- a/arch/arm/include/asm/arch-at91/at91_common.h
+++ b/arch/arm/include/asm/arch-at91/at91_common.h
@@ -35,5 +35,6 @@
void at91_spi0_hw_init(unsigned long cs_mask);
void at91_spi1_hw_init(unsigned long cs_mask);
void at91_uhp_hw_init(void);
+void at91_lcd_hw_init(void);
#endif /* AT91_COMMON_H */
diff --git a/arch/arm/include/asm/arch-at91/at91_dbu.h b/arch/arm/include/asm/arch-at91/at91_dbu.h
index 3429293..9a640a5 100644
--- a/arch/arm/include/asm/arch-at91/at91_dbu.h
+++ b/arch/arm/include/asm/arch-at91/at91_dbu.h
@@ -38,4 +38,8 @@
#define AT91_DBU_CID_ARCH_9xx 0x01900000
#define AT91_DBU_CID_ARCH_9XExx 0x02900000
+#define AT91_DBU_CIDR_MASK 0x1f
+#define AT91_DBU_CIDR 0x40
+#define AT91_DBU_EXID 0x44
+
#endif
diff --git a/arch/arm/include/asm/arch-at91/at91_pmc.h b/arch/arm/include/asm/arch-at91/at91_pmc.h
index 086cb9b..66075b4 100644
--- a/arch/arm/include/asm/arch-at91/at91_pmc.h
+++ b/arch/arm/include/asm/arch-at91/at91_pmc.h
@@ -55,7 +55,16 @@
u32 reserved5[21];
u32 wpmr; /* 0xE4 Write Protect Mode Register (CAP0) */
u32 wpsr; /* 0xE8 Write Protect Status Register (CAP0) */
+#ifdef CONFIG_SAMA5D3
+ u32 reserved6[8];
+ u32 pcer1; /* 0x100 Periperial Clock Enable Register 1 */
+ u32 pcdr1; /* 0x104 Periperial Clock Disable Register 1 */
+ u32 pcsr1; /* 0x108 Periperial Clock Status Register 1 */
+ u32 pcr; /* 0x10c Periperial Control Register */
+ u32 ocr; /* 0x110 Oscillator Calibration Register */
+#else
u32 reserved8[5];
+#endif
} at91_pmc_t;
#endif /* end not assembly */
@@ -82,6 +91,16 @@
#define AT91_PMC_MCKR_CSS_PLLB 0x00000003
#define AT91_PMC_MCKR_CSS_MASK 0x00000003
+#ifdef CONFIG_SAMA5D3
+#define AT91_PMC_MCKR_PRES_1 0x00000000
+#define AT91_PMC_MCKR_PRES_2 0x00000010
+#define AT91_PMC_MCKR_PRES_4 0x00000020
+#define AT91_PMC_MCKR_PRES_8 0x00000030
+#define AT91_PMC_MCKR_PRES_16 0x00000040
+#define AT91_PMC_MCKR_PRES_32 0x00000050
+#define AT91_PMC_MCKR_PRES_64 0x00000060
+#define AT91_PMC_MCKR_PRES_MASK 0x00000070
+#else
#define AT91_PMC_MCKR_PRES_1 0x00000000
#define AT91_PMC_MCKR_PRES_2 0x00000004
#define AT91_PMC_MCKR_PRES_4 0x00000008
@@ -90,6 +109,7 @@
#define AT91_PMC_MCKR_PRES_32 0x00000014
#define AT91_PMC_MCKR_PRES_64 0x00000018
#define AT91_PMC_MCKR_PRES_MASK 0x0000001C
+#endif
#ifdef CONFIG_AT91RM9200
#define AT91_PMC_MCKR_MDIV_1 0x00000000
@@ -100,6 +120,9 @@
#else
#define AT91_PMC_MCKR_MDIV_1 0x00000000
#define AT91_PMC_MCKR_MDIV_2 0x00000100
+#ifdef CONFIG_SAMA5D3
+#define AT91_PMC_MCKR_MDIV_3 0x00000300
+#endif
#define AT91_PMC_MCKR_MDIV_4 0x00000200
#define AT91_PMC_MCKR_MDIV_MASK 0x00000300
#endif
diff --git a/arch/arm/include/asm/arch-at91/at91sam9_matrix.h b/arch/arm/include/asm/arch-at91/at91sam9_matrix.h
index b9a93b0..6e0bebd 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9_matrix.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9_matrix.h
@@ -23,7 +23,7 @@
#include <asm/arch/at91cap9_matrix.h>
#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
#include <asm/arch/at91sam9g45_matrix.h>
-#elif defined(CONFIG_AT91SAM9X5)
+#elif defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5)
#include <asm/arch/at91sam9x5_matrix.h>
#else
#error "Unsupported AT91SAM9/CAP9 processor"
diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5.h b/arch/arm/include/asm/arch-at91/at91sam9x5.h
index b7d1932..85e42f5 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9x5.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9x5.h
@@ -1,10 +1,10 @@
/*
* Chip-specific header file for the AT91SAM9x5 family
*
- * Copyright (C) 2012 Atmel Corporation.
+ * Copyright (C) 2012-2013 Atmel Corporation.
*
* Definitions for the SoC:
- * AT91SAM9x5
+ * AT91SAM9x5 & AT91SAM9N12
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -22,10 +22,12 @@
#define ATMEL_ID_SYS 1 /* System Controller Interrupt */
#define ATMEL_ID_PIOAB 2 /* Parallel I/O Controller A and B */
#define ATMEL_ID_PIOCD 3 /* Parallel I/O Controller C and D */
-#define ATMEL_ID_SMD 4 /* SMD Soft Modem (SMD) */
+#define ATMEL_ID_SMD 4 /* SMD Soft Modem (SMD), only for AT91SAM9X5 */
+#define ATMEL_ID_FUSE 4 /* FUSE Controller, only for AT91SAM9N12 */
#define ATMEL_ID_USART0 5 /* USART 0 */
#define ATMEL_ID_USART1 6 /* USART 1 */
#define ATMEL_ID_USART2 7 /* USART 2 */
+#define ATMEL_ID_USART3 8 /* USART 3 */
#define ATMEL_ID_TWI0 9 /* Two-Wire Interface 0 */
#define ATMEL_ID_TWI1 10 /* Two-Wire Interface 1 */
#define ATMEL_ID_TWI2 11 /* Two-Wire Interface 2 */
@@ -46,6 +48,7 @@
#define ATMEL_ID_HSMCI1 26 /* High Speed Multimedia Card Interface 1 */
#define ATMEL_ID_EMAC1 27 /* Ethernet MAC1 */
#define ATMEL_ID_SSC 28 /* Synchronous Serial Controller */
+#define ATMEL_ID_TRNG 30 /* True Random Number Generator */
#define ATMEL_ID_IRQ 31 /* Advanced Interrupt Controller */
/*
@@ -85,6 +88,7 @@
/*
* System Peripherals
*/
+#define ATMEL_BASE_FUSE 0xffffdc00
#define ATMEL_BASE_MATRIX 0xffffde00
#define ATMEL_BASE_PMECC 0xffffe000
#define ATMEL_BASE_PMERRLOC 0xffffe600
@@ -111,10 +115,15 @@
*/
#define ATMEL_BASE_ROM 0x00100000 /* Internal ROM base address */
#define ATMEL_BASE_SRAM 0x00300000 /* Internal SRAM base address */
+
+#ifdef CONFIG_AT91SAM9N12
+#define ATMEL_BASE_OHCI 0x00500000 /* USB Host controller */
+#else /* AT91SAM9X5 */
#define ATMEL_BASE_SMD 0x00400000 /* SMD Controller */
#define ATMEL_BASE_UDPHS_FIFO 0x00500000 /* USB Device HS controller */
#define ATMEL_BASE_OHCI 0x00600000 /* USB Host controller (OHCI) */
#define ATMEL_BASE_EHCI 0x00700000 /* USB Host controller (EHCI) */
+#endif
/* 9x5 series chip id definitions */
#define ARCH_ID_AT91SAM9X5 0x819a05a0
@@ -140,7 +149,11 @@
/*
* Cpu Name
*/
+#ifdef CONFIG_AT91SAM9N12
+#define ATMEL_CPU_NAME "AT91SAM9N12"
+#else /* AT91SAM9X5 */
#define ATMEL_CPU_NAME get_cpu_name()
+#endif
/*
* Other misc defines
diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h b/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h
index d6ce6fa..0d33069 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h
@@ -1,10 +1,10 @@
/*
* Matrix-centric header file for the AT91SAM9X5 family
*
- * Copyright (C) 2012 Atmel Corporation.
+ * Copyright (C) 2012-2013 Atmel Corporation.
*
* Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9X5 preliminary datasheet.
+ * Based on AT91SAM9X5 & AT91SAM9N12 preliminary datasheet.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -17,14 +17,25 @@
#ifndef __ASSEMBLY__
+/* AT91SAM9N12 Matrix definition is a subset of AT91SAM9X5. */
struct at91_matrix {
u32 mcfg[16];
u32 scfg[16];
u32 pras[16][2];
u32 mrcr; /* 0x100 Master Remap Control */
- u32 filler[7];
+ u32 filler[5];
+#ifdef CONFIG_AT91SAM9X5
+ u32 filler1[2];
+#endif
+ /* EBI Chip Select Assignment Register
+ * 0x118: AT91SAM9N12
+ * 0x120: AT91SAM9X5
+ */
u32 ebicsa;
u32 filler4[47];
+#ifdef CONFIG_AT91SAM9N12
+ u32 filler5[2];
+#endif
u32 wpmr;
u32 wpsr;
};
diff --git a/arch/arm/include/asm/arch-at91/clk.h b/arch/arm/include/asm/arch-at91/clk.h
index d4852a3..04b0f83 100644
--- a/arch/arm/include/asm/arch-at91/clk.h
+++ b/arch/arm/include/asm/arch-at91/clk.h
@@ -95,4 +95,5 @@
}
int at91_clock_init(unsigned long main_clock);
+void at91_periph_clk_enable(int id);
#endif /* __ASM_ARM_ARCH_CLK_H__ */
diff --git a/arch/arm/include/asm/arch-at91/hardware.h b/arch/arm/include/asm/arch-at91/hardware.h
index 4c4ee70..b04641e 100644
--- a/arch/arm/include/asm/arch-at91/hardware.h
+++ b/arch/arm/include/asm/arch-at91/hardware.h
@@ -37,12 +37,14 @@
# include <asm/arch/at91sam9rl.h>
#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
# include <asm/arch/at91sam9g45.h>
-#elif defined(CONFIG_AT91SAM9X5)
+#elif defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5)
# include <asm/arch/at91sam9x5.h>
#elif defined(CONFIG_AT91CAP9)
# include <asm/arch/at91cap9.h>
#elif defined(CONFIG_AT91X40)
# include <asm/arch/at91x40.h>
+#elif defined(CONFIG_SAMA5D3)
+# include <asm/arch/sama5d3.h>
#else
# error "Unsupported AT91 processor"
#endif
diff --git a/arch/arm/include/asm/arch-at91/sama5d3.h b/arch/arm/include/asm/arch-at91/sama5d3.h
new file mode 100644
index 0000000..883b932
--- /dev/null
+++ b/arch/arm/include/asm/arch-at91/sama5d3.h
@@ -0,0 +1,212 @@
+/*
+ * Chip-specific header file for the SAMA5D3 family
+ *
+ * (C) 2012 - 2013 Atmel Corporation.
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * Definitions for the SoC:
+ * SAMA5D3
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef SAMA5D3_H
+#define SAMA5D3_H
+
+/*
+ * defines to be used in other places
+ */
+#define CONFIG_ARMV7 /* ARM A5 Core */
+#define CONFIG_AT91FAMILY /* it's a member of AT91 */
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define ATMEL_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define ATMEL_ID_SYS 1 /* System Controller Interrupt */
+#define ATMEL_ID_DBGU 2 /* Debug Unit Interrupt */
+#define ATMEL_ID_PIT 3 /* Periodic Interval Timer Interrupt */
+#define ATMEL_ID_WDT 4 /* Watchdog timer Interrupt */
+#define ATMEL_ID_SMC 5 /* Multi-bit ECC Interrupt */
+#define ATMEL_ID_PIOA 6 /* Parallel I/O Controller A */
+#define ATMEL_ID_PIOB 7 /* Parallel I/O Controller B */
+#define ATMEL_ID_PIOC 8 /* Parallel I/O Controller C */
+#define ATMEL_ID_PIOD 9 /* Parallel I/O Controller D */
+#define ATMEL_ID_PIOE 10 /* Parallel I/O Controller E */
+#define ATMEL_ID_SMD 11 /* SMD Soft Modem */
+#define ATMEL_ID_USART0 12 /* USART 0 */
+#define ATMEL_ID_USART1 13 /* USART 1 */
+#define ATMEL_ID_USART2 14 /* USART 2 */
+#define ATMEL_ID_USART3 15 /* USART 3 */
+#define ATMEL_ID_UART0 16
+#define ATMEL_ID_UART1 17
+#define ATMEL_ID_TWI0 18 /* Two-Wire Interface 0 */
+#define ATMEL_ID_TWI1 19 /* Two-Wire Interface 1 */
+#define ATMEL_ID_TWI2 20 /* Two-Wire Interface 2 */
+#define ATMEL_ID_MCI0 21 /* High Speed Multimedia Card Interface 0 */
+#define ATMEL_ID_MCI1 22 /* */
+#define ATMEL_ID_MCI2 23 /* */
+#define ATMEL_ID_SPI0 24 /* Serial Peripheral Interface 0 */
+#define ATMEL_ID_SPI1 25 /* Serial Peripheral Interface 1 */
+#define ATMEL_ID_TC0 26 /* */
+#define ATMEL_ID_TC1 27 /* */
+#define ATMEL_ID_PWMC 28 /* Pulse Width Modulation Controller */
+#define ATMEL_ID_TSC 29 /* Touch Screen ADC Controller */
+#define ATMEL_ID_DMA0 30 /* DMA Controller */
+#define ATMEL_ID_DMA1 31 /* DMA Controller */
+#define ATMEL_ID_UHPHS 32 /* USB Host High Speed */
+#define ATMEL_ID_UDPHS 33 /* USB Device High Speed */
+#define ATMEL_ID_GMAC 34
+#define ATMEL_ID_EMAC 35 /* Ethernet MAC */
+#define ATMEL_ID_LCDC 36 /* LCD Controller */
+#define ATMEL_ID_ISI 37 /* Image Sensor Interface */
+#define ATMEL_ID_SSC0 38 /* Synchronous Serial Controller 0 */
+#define ATMEL_ID_SSC1 39 /* Synchronous Serial Controller 1 */
+#define ATMEL_ID_CAN0 40
+#define ATMEL_ID_CAN1 41
+#define ATMEL_ID_SHA 42
+#define ATMEL_ID_AES 43
+#define ATMEL_ID_TDES 44
+#define ATMEL_ID_TRNG 45
+#define ATMEL_ID_ARM 46
+#define ATMEL_ID_IRQ0 47 /* Advanced Interrupt Controller */
+#define ATMEL_ID_FUSE 48
+#define ATMEL_ID_MPDDRC 49
+
+/* sama5d3 series chip id definitions */
+#define ARCH_ID_SAMA5D3 0x8a5c07c0
+#define ARCH_EXID_SAMA5D31 0x00444300
+#define ARCH_EXID_SAMA5D33 0x00414300
+#define ARCH_EXID_SAMA5D34 0x00414301
+#define ARCH_EXID_SAMA5D35 0x00584300
+
+#define cpu_is_sama5d3() (get_chip_id() == ARCH_ID_SAMA5D3)
+#define cpu_is_sama5d31() (cpu_is_sama5d3() && \
+ (get_extension_chip_id() == ARCH_EXID_SAMA5D31))
+#define cpu_is_sama5d33() (cpu_is_sama5d3() && \
+ (get_extension_chip_id() == ARCH_EXID_SAMA5D33))
+#define cpu_is_sama5d34() (cpu_is_sama5d3() && \
+ (get_extension_chip_id() == ARCH_EXID_SAMA5D34))
+#define cpu_is_sama5d35() (cpu_is_sama5d3() && \
+ (get_extension_chip_id() == ARCH_EXID_SAMA5D35))
+
+/*
+ * User Peripherals physical base addresses.
+ */
+#define ATMEL_BASE_MCI0 0xf0000000
+#define ATMEL_BASE_SPI0 0xf0004000
+#define ATMEL_BASE_SSC0 0xf000C000
+#define ATMEL_BASE_TC2 0xf0010000
+#define ATMEL_BASE_TWI0 0xf0014000
+#define ATMEL_BASE_TWI1 0xf0018000
+#define ATMEL_BASE_USART0 0xf001c000
+#define ATMEL_BASE_USART1 0xf0020000
+#define ATMEL_BASE_UART0 0xf0024000
+#define ATMEL_BASE_GMAC 0xf0028000
+#define ATMEL_BASE_PWMC 0xf002c000
+#define ATMEL_BASE_LCDC 0xf0030000
+#define ATMEL_BASE_ISI 0xf0034000
+#define ATMEL_BASE_SFR 0xf0038000
+/* Reserved: 0xf003c000 - 0xf8000000 */
+#define ATMEL_BASE_MCI1 0xf8000000
+#define ATMEL_BASE_MCI2 0xf8004000
+#define ATMEL_BASE_SPI1 0xf8008000
+#define ATMEL_BASE_SSC1 0xf800c000
+#define ATMEL_BASE_CAN1 0xf8010000
+#define ATMEL_BASE_TC3 0xf8014000
+#define ATMEL_BASE_TSADC 0xf8018000
+#define ATMEL_BASE_TWI2 0xf801c000
+#define ATMEL_BASE_USART2 0xf8020000
+#define ATMEL_BASE_USART3 0xf8024000
+#define ATMEL_BASE_UART1 0xf8028000
+#define ATMEL_BASE_EMAC 0xf802c000
+#define ATMEL_BASE_UDHPS 0xf8030000
+#define ATMEL_BASE_SHA 0xf8034000
+#define ATMEL_BASE_AES 0xf8038000
+#define ATMEL_BASE_TDES 0xf803c000
+#define ATMEL_BASE_TRNG 0xf8040000
+/* Reserved: 0xf804400 - 0xffffc00 */
+
+/*
+ * System Peripherals physical base addresses.
+ */
+#define ATMEL_BASE_SYS 0xffffc000
+#define ATMEL_BASE_SMC 0xffffc000
+#define ATMEL_BASE_PMECC (ATMEL_BASE_SMC + 0x070)
+#define ATMEL_BASE_PMERRLOC (ATMEL_BASE_SMC + 0x500)
+#define ATMEL_BASE_FUSE 0xffffe400
+#define ATMEL_BASE_DMAC0 0xffffe600
+#define ATMEL_BASE_DMAC1 0xffffe800
+#define ATMEL_BASE_MPDDRC 0xffffea00
+#define ATMEL_BASE_MATRIX 0xffffec00
+#define ATMEL_BASE_DBGU 0xffffee00
+#define ATMEL_BASE_AIC 0xfffff000
+#define ATMEL_BASE_PIOA 0xfffff200
+#define ATMEL_BASE_PIOB 0xfffff400
+#define ATMEL_BASE_PIOC 0xfffff600
+#define ATMEL_BASE_PIOD 0xfffff800
+#define ATMEL_BASE_PIOE 0xfffffa00
+#define ATMEL_BASE_PMC 0xfffffc00
+#define ATMEL_BASE_RSTC 0xfffffe00
+#define ATMEL_BASE_SHDWN 0xfffffe10
+#define ATMEL_BASE_PIT 0xfffffe30
+#define ATMEL_BASE_WDT 0xfffffe40
+#define ATMEL_BASE_SCKCR 0xfffffe50
+#define ATMEL_BASE_GPBR 0xfffffe60
+#define ATMEL_BASE_RTC 0xfffffeb0
+/* Reserved: 0xfffffee0 - 0xffffffff */
+
+/*
+ * Internal Memory.
+ */
+#define ATMEL_BASE_ROM 0x00100000 /* Internal ROM base address */
+#define ATMEL_BASE_SRAM 0x00200000 /* Internal ROM base address */
+#define ATMEL_BASE_SRAM0 0x00300000 /* Internal SRAM base address */
+#define ATMEL_BASE_SRAM1 0x00310000 /* Internal SRAM base address */
+#define ATMEL_BASE_SMD 0x00400000 /* Internal ROM base address */
+#define ATMEL_BASE_UDPHS_FIFO 0x00500000 /* USB Device HS controller */
+#define ATMEL_BASE_OHCI 0x00600000 /* USB Host controller (OHCI) */
+#define ATMEL_BASE_EHCI 0x00700000 /* USB Host controller (EHCI) */
+#define ATMEL_BASE_AXI 0x00800000 /* Video Decoder Controller */
+#define ATMEL_BASE_DAP 0x00900000 /* Video Decoder Controller */
+
+/*
+ * External memory
+ */
+#define ATMEL_BASE_CS0 0x10000000
+#define ATMEL_BASE_DDRCS 0x20000000
+#define ATMEL_BASE_CS1 0x40000000
+#define ATMEL_BASE_CS2 0x50000000
+#define ATMEL_BASE_CS3 0x60000000
+
+/*
+ * Other misc defines
+ */
+#define ATMEL_PIO_PORTS 5
+#define CPU_HAS_PIO3
+#define PIO_SCDR_DIV 0x3fff
+
+/*
+ * PMECC table in ROM
+ */
+#define ATMEL_PMECC_INDEX_OFFSET_512 0x10000
+#define ATMEL_PMECC_INDEX_OFFSET_1024 0x18000
+#define ATMEL_PMECC_ALPHA_OFFSET_512 0x10000
+#define ATMEL_PMECC_ALPHA_OFFSET_1024 0x18000
+
+/*
+ * SAMA5D3 specific prototypes
+ */
+#ifndef __ASSEMBLY__
+unsigned int get_chip_id(void);
+unsigned int get_extension_chip_id(void);
+unsigned int has_emac(void);
+unsigned int has_gmac(void);
+unsigned int has_lcdc(void);
+char *get_cpu_name(void);
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/arch-at91/sama5d3_smc.h b/arch/arm/include/asm/arch-at91/sama5d3_smc.h
new file mode 100644
index 0000000..eb53eba
--- /dev/null
+++ b/arch/arm/include/asm/arch-at91/sama5d3_smc.h
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2012 Atmel Corporation.
+ *
+ * Static Memory Controllers (SMC) - System peripherals registers.
+ * Based on SAMA5D3 datasheet.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef SAMA5D3_SMC_H
+#define SAMA5D3_SMC_H
+
+#ifdef __ASSEMBLY__
+#define AT91_ASM_SMC_SETUP0 (ATMEL_BASE_SMC + 0x600)
+#define AT91_ASM_SMC_PULSE0 (ATMEL_BASE_SMC + 0x604)
+#define AT91_ASM_SMC_CYCLE0 (ATMEL_BASE_SMC + 0x608)
+#define AT91_ASM_SMC_MODE0 (ATMEL_BASE_SMC + 0x60C)
+#else
+struct at91_cs {
+ u32 reserved[96];
+ u32 setup; /* 0x600 SMC Setup Register */
+ u32 pulse; /* 0x604 SMC Pulse Register */
+ u32 cycle; /* 0x608 SMC Cycle Register */
+ u32 timings; /* 0x60C SMC Cycle Register */
+ u32 mode; /* 0x610 SMC Mode Register */
+};
+
+struct at91_smc {
+ struct at91_cs cs[4];
+};
+#endif /* __ASSEMBLY__ */
+
+#define AT91_SMC_SETUP_NWE(x) (x & 0x3f)
+#define AT91_SMC_SETUP_NCS_WR(x) ((x & 0x3f) << 8)
+#define AT91_SMC_SETUP_NRD(x) ((x & 0x3f) << 16)
+#define AT91_SMC_SETUP_NCS_RD(x) ((x & 0x3f) << 24)
+
+#define AT91_SMC_PULSE_NWE(x) (x & 0x3f)
+#define AT91_SMC_PULSE_NCS_WR(x) ((x & 0x3f) << 8)
+#define AT91_SMC_PULSE_NRD(x) ((x & 0x3f) << 16)
+#define AT91_SMC_PULSE_NCS_RD(x) ((x & 0x3f) << 24)
+
+#define AT91_SMC_CYCLE_NWE(x) (x & 0x1ff)
+#define AT91_SMC_CYCLE_NRD(x) ((x & 0x1ff) << 16)
+
+#define AT91_SMC_TIMINGS_TCLR(x) (x & 0xf)
+#define AT91_SMC_TIMINGS_TADL(x) ((x & 0xf) << 4)
+#define AT91_SMC_TIMINGS_TAR(x) ((x & 0xf) << 8)
+#define AT91_SMC_TIMINGS_OCMS(x) ((x & 0x1) << 12)
+#define AT91_SMC_TIMINGS_TRR(x) ((x & 0xf) << 16)
+#define AT91_SMC_TIMINGS_TWB(x) ((x & 0xf) << 24)
+#define AT91_SMC_TIMINGS_RBNSEL(x) ((x & 0xf) << 28)
+#define AT91_SMC_TIMINGS_NFSEL(x) ((x & 0x1) << 31)
+
+#define AT91_SMC_MODE_RM_NCS 0x00000000
+#define AT91_SMC_MODE_RM_NRD 0x00000001
+#define AT91_SMC_MODE_WM_NCS 0x00000000
+#define AT91_SMC_MODE_WM_NWE 0x00000002
+
+#define AT91_SMC_MODE_EXNW_DISABLE 0x00000000
+#define AT91_SMC_MODE_EXNW_FROZEN 0x00000020
+#define AT91_SMC_MODE_EXNW_READY 0x00000030
+
+#define AT91_SMC_MODE_BAT 0x00000100
+#define AT91_SMC_MODE_DBW_8 0x00000000
+#define AT91_SMC_MODE_DBW_16 0x00001000
+#define AT91_SMC_MODE_DBW_32 0x00002000
+#define AT91_SMC_MODE_TDF_CYCLE(x) ((x & 0xf) << 16)
+#define AT91_SMC_MODE_TDF 0x00100000
+#define AT91_SMC_MODE_PMEN 0x01000000
+#define AT91_SMC_MODE_PS_4 0x00000000
+#define AT91_SMC_MODE_PS_8 0x10000000
+#define AT91_SMC_MODE_PS_16 0x20000000
+#define AT91_SMC_MODE_PS_32 0x30000000
+
+#endif
diff --git a/arch/arm/include/asm/arch-davinci/hardware.h b/arch/arm/include/asm/arch-davinci/hardware.h
index 6eed6c9..a9017e4 100644
--- a/arch/arm/include/asm/arch-davinci/hardware.h
+++ b/arch/arm/include/asm/arch-davinci/hardware.h
@@ -346,6 +346,8 @@
#define PSC_PSC0_MODULE_ID_CNT 16
#define PSC_PSC1_MODULE_ID_CNT 32
+#define UART0_PWREMU_MGMT (0x01c42030)
+
struct davinci_psc_regs {
dv_reg revid;
dv_reg rsvd0[71];
diff --git a/arch/arm/include/asm/arch-davinci/nand_defs.h b/arch/arm/include/asm/arch-davinci/nand_defs.h
index 10f3a39..4a30813 100644
--- a/arch/arm/include/asm/arch-davinci/nand_defs.h
+++ b/arch/arm/include/asm/arch-davinci/nand_defs.h
@@ -36,6 +36,15 @@
#define MASK_ALE 0x08
#endif
+#ifdef CONFIG_SYS_NAND_MASK_CLE
+#undef MASK_CLE
+#define MASK_CLE CONFIG_SYS_NAND_MASK_CLE
+#endif
+#ifdef CONFIG_SYS_NAND_MASK_ALE
+#undef MASK_ALE
+#define MASK_ALE CONFIG_SYS_NAND_MASK_ALE
+#endif
+
#define NAND_READ_START 0x00
#define NAND_READ_END 0x30
#define NAND_STATUS 0x70
diff --git a/arch/arm/include/asm/arch-davinci/pinmux_defs.h b/arch/arm/include/asm/arch-davinci/pinmux_defs.h
index a851f1f..beaf0d6 100644
--- a/arch/arm/include/asm/arch-davinci/pinmux_defs.h
+++ b/arch/arm/include/asm/arch-davinci/pinmux_defs.h
@@ -22,8 +22,14 @@
#define __ASM_ARCH_PINMUX_DEFS_H
#include <asm/arch/davinci_misc.h>
+#include <config.h>
-/* SPI pin muxer settings */
+/* SPI0 pin muxer settings */
+extern const struct pinmux_config spi0_pins_base[3];
+extern const struct pinmux_config spi0_pins_scs0[1];
+extern const struct pinmux_config spi0_pins_ena[1];
+
+/* SPI1 pin muxer settings */
extern const struct pinmux_config spi1_pins_base[3];
extern const struct pinmux_config spi1_pins_scs0[1];
@@ -35,6 +41,7 @@
/* EMAC pin muxer settings*/
extern const struct pinmux_config emac_pins_rmii[7];
+extern const struct pinmux_config emac_pins_rmii_clk_source[1];
extern const struct pinmux_config emac_pins_mii[15];
extern const struct pinmux_config emac_pins_mdio[2];
@@ -43,13 +50,19 @@
extern const struct pinmux_config i2c1_pins[2];
/* EMIFA pin muxer settings */
+extern const struct pinmux_config emifa_pins[40];
+extern const struct pinmux_config emifa_pins_cs0[1];
extern const struct pinmux_config emifa_pins_cs2[1];
extern const struct pinmux_config emifa_pins_cs3[1];
extern const struct pinmux_config emifa_pins_cs4[1];
extern const struct pinmux_config emifa_pins_nand[12];
extern const struct pinmux_config emifa_pins_nor[43];
+/* USB pin mux setting */
+extern const struct pinmux_config usb_pins[1];
+
/* MMC pin muxer settings */
+extern const struct pinmux_config mmc0_pins_8bit[10];
extern const struct pinmux_config mmc0_pins[6];
#endif
diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h b/arch/arm/include/asm/arch-mx25/imx-regs.h
index 5f4b543..46f59d7 100644
--- a/arch/arm/include/asm/arch-mx25/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx25/imx-regs.h
@@ -113,8 +113,12 @@
u32 iim_sdat;
u32 iim_prev;
u32 iim_srev;
- u32 iim_prog_p;
- u32 res1[0x1f5];
+ u32 iim_prg_p;
+ u32 iim_scs0;
+ u32 iim_scs1;
+ u32 iim_scs2;
+ u32 iim_scs3;
+ u32 res1[0x1f1];
struct fuse_bank {
u32 fuse_regs[0x20];
u32 fuse_rsvd[0xe0];
@@ -122,10 +126,19 @@
};
struct fuse_bank0_regs {
- u32 fuse0_25[0x1a];
+ u32 fuse0_7[8];
+ u32 uid[8];
+ u32 fuse16_25[0xa];
u32 mac_addr[6];
};
+struct fuse_bank1_regs {
+ u32 fuse0_21[0x16];
+ u32 usr5;
+ u32 fuse23_29[7];
+ u32 usr6[2];
+};
+
/* Multi-Layer AHB Crossbar Switch (MAX) registers */
struct max_regs {
u32 mpr0;
@@ -187,6 +200,7 @@
#define IMX_CSPI1_BASE (0x43FA4000)
#define IMX_KPP_BASE (0x43FA8000)
#define IMX_IOPADMUX_BASE (0x43FAC000)
+#define IOMUXC_BASE_ADDR IMX_IOPADMUX_BASE
#define IMX_IOPADCTL_BASE (0x43FAC22C)
#define IMX_IOPADGRPCTL_BASE (0x43FAC418)
#define IMX_IOPADINPUTSEL_BASE (0x43FAC460)
@@ -240,6 +254,7 @@
#define IMX_PWM1_BASE (0x53FE0000)
#define IMX_RTIC_BASE (0x53FEC000)
#define IMX_IIM_BASE (0x53FF0000)
+#define IIM_BASE_ADDR IMX_IIM_BASE
#define IMX_USB_BASE (0x53FF4000)
#define IMX_USB_PORT_OFFSET 0x200
#define IMX_CSI_BASE (0x53FF8000)
diff --git a/arch/arm/include/asm/arch-mx25/imx25-pinmux.h b/arch/arm/include/asm/arch-mx25/imx25-pinmux.h
deleted file mode 100644
index a4c658b..0000000
--- a/arch/arm/include/asm/arch-mx25/imx25-pinmux.h
+++ /dev/null
@@ -1,421 +0,0 @@
-/*
- * iopin settings are controlled by four different sets of registers
- * iopad mux control
- * individual iopad setup (voltage select, pull/keep, drive strength ...)
- * group iopad setup (same as above but for groups of signals)
- * input select when multiple inputs are possible
- */
-
-/*
- * software pad mux control
- */
-/* SW Input On (Loopback) */
-#define MX25_PIN_MUX_SION (1 << 4)
-/* MUX Mode (0-7) */
-#define MX25_PIN_MUX_MODE(mode) ((mode & 0x7) << 0)
-struct iomuxc_mux_ctl {
- u32 gpr1;
- u32 observe_int_mux;
- u32 pad_a10;
- u32 pad_a13;
- u32 pad_a14;
- u32 pad_a15;
- u32 pad_a16;
- u32 pad_a17;
- u32 pad_a18;
- u32 pad_a19;
- u32 pad_a20;
- u32 pad_a21;
- u32 pad_a22;
- u32 pad_a23;
- u32 pad_a24;
- u32 pad_a25;
- u32 pad_eb0;
- u32 pad_eb1;
- u32 pad_oe;
- u32 pad_cs0;
- u32 pad_cs1;
- u32 pad_cs4;
- u32 pad_cs5;
- u32 pad_nf_ce0;
- u32 pad_ecb;
- u32 pad_lba;
- u32 pad_bclk;
- u32 pad_rw;
- u32 pad_nfwe_b;
- u32 pad_nfre_b;
- u32 pad_nfale;
- u32 pad_nfcle;
- u32 pad_nfwp_b;
- u32 pad_nfrb;
- u32 pad_d15;
- u32 pad_d14;
- u32 pad_d13;
- u32 pad_d12;
- u32 pad_d11;
- u32 pad_d10;
- u32 pad_d9;
- u32 pad_d8;
- u32 pad_d7;
- u32 pad_d6;
- u32 pad_d5;
- u32 pad_d4;
- u32 pad_d3;
- u32 pad_d2;
- u32 pad_d1;
- u32 pad_d0;
- u32 pad_ld0;
- u32 pad_ld1;
- u32 pad_ld2;
- u32 pad_ld3;
- u32 pad_ld4;
- u32 pad_ld5;
- u32 pad_ld6;
- u32 pad_ld7;
- u32 pad_ld8;
- u32 pad_ld9;
- u32 pad_ld10;
- u32 pad_ld11;
- u32 pad_ld12;
- u32 pad_ld13;
- u32 pad_ld14;
- u32 pad_ld15;
- u32 pad_hsync;
- u32 pad_vsync;
- u32 pad_lsclk;
- u32 pad_oe_acd;
- u32 pad_contrast;
- u32 pad_pwm;
- u32 pad_csi_d2;
- u32 pad_csi_d3;
- u32 pad_csi_d4;
- u32 pad_csi_d5;
- u32 pad_csi_d6;
- u32 pad_csi_d7;
- u32 pad_csi_d8;
- u32 pad_csi_d9;
- u32 pad_csi_mclk;
- u32 pad_csi_vsync;
- u32 pad_csi_hsync;
- u32 pad_csi_pixclk;
- u32 pad_i2c1_clk;
- u32 pad_i2c1_dat;
- u32 pad_cspi1_mosi;
- u32 pad_cspi1_miso;
- u32 pad_cspi1_ss0;
- u32 pad_cspi1_ss1;
- u32 pad_cspi1_sclk;
- u32 pad_cspi1_rdy;
- u32 pad_uart1_rxd;
- u32 pad_uart1_txd;
- u32 pad_uart1_rts;
- u32 pad_uart1_cts;
- u32 pad_uart2_rxd;
- u32 pad_uart2_txd;
- u32 pad_uart2_rts;
- u32 pad_uart2_cts;
- u32 pad_sd1_cmd;
- u32 pad_sd1_clk;
- u32 pad_sd1_data0;
- u32 pad_sd1_data1;
- u32 pad_sd1_data2;
- u32 pad_sd1_data3;
- u32 pad_kpp_row0;
- u32 pad_kpp_row1;
- u32 pad_kpp_row2;
- u32 pad_kpp_row3;
- u32 pad_kpp_col0;
- u32 pad_kpp_col1;
- u32 pad_kpp_col2;
- u32 pad_kpp_col3;
- u32 pad_fec_mdc;
- u32 pad_fec_mdio;
- u32 pad_fec_tdata0;
- u32 pad_fec_tdata1;
- u32 pad_fec_tx_en;
- u32 pad_fec_rdata0;
- u32 pad_fec_rdata1;
- u32 pad_fec_rx_dv;
- u32 pad_fec_tx_clk;
- u32 pad_rtck;
- u32 pad_de_b;
- u32 pad_gpio_a;
- u32 pad_gpio_b;
- u32 pad_gpio_c;
- u32 pad_gpio_d;
- u32 pad_gpio_e;
- u32 pad_gpio_f;
- u32 pad_ext_armclk;
- u32 pad_upll_bypclk;
- u32 pad_vstby_req;
- u32 pad_vstby_ack;
- u32 pad_power_fail;
- u32 pad_clko;
- u32 pad_boot_mode0;
- u32 pad_boot_mode1;
-};
-
-/*
- * software pad control
- */
-/* Select 3.3 or 1.8 volts */
-#define MX25_PIN_PAD_CTL_DVS_33 (0 << 13)
-#define MX25_PIN_PAD_CTL_DVS_18 (1 << 13)
-/* Enable hysteresis */
-#define MX25_PIN_PAD_CTL_HYS (1 << 8)
-/* Enable pull/keeper */
-#define MX25_PIN_PAD_CTL_PKE (1 << 7)
-/* 0 - keeper / 1 - pull */
-#define MX25_PIN_PAD_CTL_PUE (1 << 6)
-/* pull up/down strength */
-#define MX25_PIN_PAD_CTL_100K_PD (0 << 4)
-#define MX25_PIN_PAD_CTL_47K_PU (1 << 4)
-#define MX25_PIN_PAD_CTL_100K_PU (2 << 4)
-#define MX25_PIN_PAD_CTL_22K_PU (3 << 4)
-/* open drain control */
-#define MX25_PIN_PAD_CTL_OD (1 << 3)
-/* drive strength */
-#define MX25_PIN_PAD_CTL_DS_NOM (0 << 1)
-#define MX25_PIN_PAD_CTL_DS_HIGH (1 << 1)
-#define MX25_PIN_PAD_CTL_DS_MAX (2 << 1)
-#define MX25_PIN_PAD_CTL_DS_MAX11 (3 << 1)
-/* slew rate */
-#define MX25_PIN_PAD_CTL_SRE_SLOW (0 << 0)
-#define MX25_PIN_PAD_CTL_SRE_FAST (1 << 0)
-struct iomuxc_pad_ctl {
- u32 pad_a13;
- u32 pad_a14;
- u32 pad_a15;
- u32 pad_a17;
- u32 pad_a18;
- u32 pad_a19;
- u32 pad_a20;
- u32 pad_a21;
- u32 pad_a23;
- u32 pad_a24;
- u32 pad_a25;
- u32 pad_eb0;
- u32 pad_eb1;
- u32 pad_oe;
- u32 pad_cs4;
- u32 pad_cs5;
- u32 pad_nf_ce0;
- u32 pad_ecb;
- u32 pad_lba;
- u32 pad_rw;
- u32 pad_nfrb;
- u32 pad_d15;
- u32 pad_d14;
- u32 pad_d13;
- u32 pad_d12;
- u32 pad_d11;
- u32 pad_d10;
- u32 pad_d9;
- u32 pad_d8;
- u32 pad_d7;
- u32 pad_d6;
- u32 pad_d5;
- u32 pad_d4;
- u32 pad_d3;
- u32 pad_d2;
- u32 pad_d1;
- u32 pad_d0;
- u32 pad_ld0;
- u32 pad_ld1;
- u32 pad_ld2;
- u32 pad_ld3;
- u32 pad_ld4;
- u32 pad_ld5;
- u32 pad_ld6;
- u32 pad_ld7;
- u32 pad_ld8;
- u32 pad_ld9;
- u32 pad_ld10;
- u32 pad_ld11;
- u32 pad_ld12;
- u32 pad_ld13;
- u32 pad_ld14;
- u32 pad_ld15;
- u32 pad_hsync;
- u32 pad_vsync;
- u32 pad_lsclk;
- u32 pad_oe_acd;
- u32 pad_contrast;
- u32 pad_pwm;
- u32 pad_csi_d2;
- u32 pad_csi_d3;
- u32 pad_csi_d4;
- u32 pad_csi_d5;
- u32 pad_csi_d6;
- u32 pad_csi_d7;
- u32 pad_csi_d8;
- u32 pad_csi_d9;
- u32 pad_csi_mclk;
- u32 pad_csi_vsync;
- u32 pad_csi_hsync;
- u32 pad_csi_pixclk;
- u32 pad_i2c1_clk;
- u32 pad_i2c1_dat;
- u32 pad_cspi1_mosi;
- u32 pad_cspi1_miso;
- u32 pad_cspi1_ss0;
- u32 pad_cspi1_ss1;
- u32 pad_cspi1_sclk;
- u32 pad_cspi1_rdy;
- u32 pad_uart1_rxd;
- u32 pad_uart1_txd;
- u32 pad_uart1_rts;
- u32 pad_uart1_cts;
- u32 pad_uart2_rxd;
- u32 pad_uart2_txd;
- u32 pad_uart2_rts;
- u32 pad_uart2_cts;
- u32 pad_sd1_cmd;
- u32 pad_sd1_clk;
- u32 pad_sd1_data0;
- u32 pad_sd1_data1;
- u32 pad_sd1_data2;
- u32 pad_sd1_data3;
- u32 pad_kpp_row0;
- u32 pad_kpp_row1;
- u32 pad_kpp_row2;
- u32 pad_kpp_row3;
- u32 pad_kpp_col0;
- u32 pad_kpp_col1;
- u32 pad_kpp_col2;
- u32 pad_kpp_col3;
- u32 pad_fec_mdc;
- u32 pad_fec_mdio;
- u32 pad_fec_tdata0;
- u32 pad_fec_tdata1;
- u32 pad_fec_tx_en;
- u32 pad_fec_rdata0;
- u32 pad_fec_rdata1;
- u32 pad_fec_rx_dv;
- u32 pad_fec_tx_clk;
- u32 pad_rtck;
- u32 pad_tdo;
- u32 pad_de_b;
- u32 pad_gpio_a;
- u32 pad_gpio_b;
- u32 pad_gpio_c;
- u32 pad_gpio_d;
- u32 pad_gpio_e;
- u32 pad_gpio_f;
- u32 pad_vstby_req;
- u32 pad_vstby_ack;
- u32 pad_power_fail;
- u32 pad_clko;
-};
-
-
-/*
- * Pad group drive strength and voltage select
- * Same fields as iomuxc_pad_ctl plus ddr type
- */
-/* Select DDR type */
-#define MX25_PIN_PAD_CTL_DDR_18 (0 << 11)
-#define MX25_PIN_PAD_CTL_DDR_33 (1 << 11)
-#define MX25_PIN_PAD_CTL_DDR_MAX (2 << 11)
-struct iomuxc_pad_grp_ctl {
- u32 grp_dvs_misc;
- u32 grp_dse_fec;
- u32 grp_dvs_jtag;
- u32 grp_dse_nfc;
- u32 grp_dse_csi;
- u32 grp_dse_weim;
- u32 grp_dse_ddr;
- u32 grp_dvs_crm;
- u32 grp_dse_kpp;
- u32 grp_dse_sdhc1;
- u32 grp_dse_lcd;
- u32 grp_dse_uart;
- u32 grp_dvs_nfc;
- u32 grp_dvs_csi;
- u32 grp_dse_cspi1;
- u32 grp_ddrtype;
- u32 grp_dvs_sdhc1;
- u32 grp_dvs_lcd;
-};
-
-/*
- * Pad input select control
- * Select which pad to connect to an input port
- * where multiple pads can function as given input
- */
-#define MX25_PAD_INPUT_SELECT_DAISY(in) ((in & 0x7) << 0)
-struct iomuxc_pad_input_select {
- u32 audmux_p4_input_da_amx;
- u32 audmux_p4_input_db_amx;
- u32 audmux_p4_input_rxclk_amx;
- u32 audmux_p4_input_rxfs_amx;
- u32 audmux_p4_input_txclk_amx;
- u32 audmux_p4_input_txfs_amx;
- u32 audmux_p7_input_da_amx;
- u32 audmux_p7_input_txfs_amx;
- u32 can1_ipp_ind_canrx;
- u32 can2_ipp_ind_canrx;
- u32 csi_ipp_csi_d_0;
- u32 csi_ipp_csi_d_1;
- u32 cspi1_ipp_ind_ss3_b;
- u32 cspi2_ipp_cspi_clk_in;
- u32 cspi2_ipp_ind_dataready_b;
- u32 cspi2_ipp_ind_miso;
- u32 cspi2_ipp_ind_mosi;
- u32 cspi2_ipp_ind_ss0_b;
- u32 cspi2_ipp_ind_ss1_b;
- u32 cspi3_ipp_cspi_clk_in;
- u32 cspi3_ipp_ind_dataready_b;
- u32 cspi3_ipp_ind_miso;
- u32 cspi3_ipp_ind_mosi;
- u32 cspi3_ipp_ind_ss0_b;
- u32 cspi3_ipp_ind_ss1_b;
- u32 cspi3_ipp_ind_ss2_b;
- u32 cspi3_ipp_ind_ss3_b;
- u32 esdhc1_ipp_dat4_in;
- u32 esdhc1_ipp_dat5_in;
- u32 esdhc1_ipp_dat6_in;
- u32 esdhc1_ipp_dat7_in;
- u32 esdhc2_ipp_card_clk_in;
- u32 esdhc2_ipp_cmd_in;
- u32 esdhc2_ipp_dat0_in;
- u32 esdhc2_ipp_dat1_in;
- u32 esdhc2_ipp_dat2_in;
- u32 esdhc2_ipp_dat3_in;
- u32 esdhc2_ipp_dat4_in;
- u32 esdhc2_ipp_dat5_in;
- u32 esdhc2_ipp_dat6_in;
- u32 esdhc2_ipp_dat7_in;
- u32 fec_fec_col;
- u32 fec_fec_crs;
- u32 fec_fec_rdata_2;
- u32 fec_fec_rdata_3;
- u32 fec_fec_rx_clk;
- u32 fec_fec_rx_er;
- u32 i2c2_ipp_scl_in;
- u32 i2c2_ipp_sda_in;
- u32 i2c3_ipp_scl_in;
- u32 i2c3_ipp_sda_in;
- u32 kpp_ipp_ind_col_4;
- u32 kpp_ipp_ind_col_5;
- u32 kpp_ipp_ind_col_6;
- u32 kpp_ipp_ind_col_7;
- u32 kpp_ipp_ind_row_4;
- u32 kpp_ipp_ind_row_5;
- u32 kpp_ipp_ind_row_6;
- u32 kpp_ipp_ind_row_7;
- u32 sim1_pin_sim_rcvd1_in;
- u32 sim1_pin_sim_simpd1;
- u32 sim1_sim_rcvd1_io;
- u32 sim2_pin_sim_rcvd1_in;
- u32 sim2_pin_sim_simpd1;
- u32 sim2_sim_rcvd1_io;
- u32 uart3_ipp_uart_rts_b;
- u32 uart3_ipp_uart_rxd_mux;
- u32 uart4_ipp_uart_rts_b;
- u32 uart4_ipp_uart_rxd_mux;
- u32 uart5_ipp_uart_rts_b;
- u32 uart5_ipp_uart_rxd_mux;
- u32 usb_top_ipp_ind_otg_usb_oc;
- u32 usb_top_ipp_ind_uh2_usb_oc;
-};
diff --git a/arch/arm/include/asm/arch-mx25/iomux-mx25.h b/arch/arm/include/asm/arch-mx25/iomux-mx25.h
new file mode 100644
index 0000000..c0f5c61
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx25/iomux-mx25.h
@@ -0,0 +1,545 @@
+/*
+ * (C) Copyright 2013 ADVANSEE
+ * Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
+ *
+ * Based on mainline Linux i.MX iomux-mx25.h file:
+ * Copyright (C) 2009 by Lothar Wassmann <LW@KARO-electronics.de>
+ *
+ * Based on Linux arch/arm/mach-mx25/mx25_pins.h:
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * and Linux arch/arm/plat-mxc/include/mach/iomux-mx35.h:
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __IOMUX_MX25_H__
+#define __IOMUX_MX25_H__
+
+#include <asm/imx-common/iomux-v3.h>
+
+/* Pad control groupings */
+#define MX25_KPP_ROW_PAD_CTRL PAD_CTL_PUS_100K_UP
+#define MX25_KPP_COL_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
+
+/*
+ * The naming convention for the pad modes is MX25_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
+ * See also iomux-v3.h
+ */
+
+/* PAD MUX ALT INPSE PATH PADCTRL */
+enum {
+ MX25_PAD_A10__A10 = IOMUX_PAD(0x000, 0x008, 0x00, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_A10__GPIO_4_0 = IOMUX_PAD(0x000, 0x008, 0x05, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_A13__A13 = IOMUX_PAD(0x22C, 0x00c, 0x00, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_A13__GPIO_4_1 = IOMUX_PAD(0x22C, 0x00c, 0x05, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_A14__A14 = IOMUX_PAD(0x230, 0x010, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_A14__GPIO_2_0 = IOMUX_PAD(0x230, 0x010, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_A15__A15 = IOMUX_PAD(0x234, 0x014, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_A15__GPIO_2_1 = IOMUX_PAD(0x234, 0x014, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_A16__A16 = IOMUX_PAD(0x000, 0x018, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_A16__GPIO_2_2 = IOMUX_PAD(0x000, 0x018, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_A17__A17 = IOMUX_PAD(0x238, 0x01c, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_A17__GPIO_2_3 = IOMUX_PAD(0x238, 0x01c, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_A18__A18 = IOMUX_PAD(0x23c, 0x020, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_A18__GPIO_2_4 = IOMUX_PAD(0x23c, 0x020, 0x15, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_A18__FEC_COL = IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTRL),
+
+ MX25_PAD_A19__A19 = IOMUX_PAD(0x240, 0x024, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_A19__FEC_RX_ER = IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTRL),
+ MX25_PAD_A19__GPIO_2_5 = IOMUX_PAD(0x240, 0x024, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_A20__A20 = IOMUX_PAD(0x244, 0x028, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_A20__GPIO_2_6 = IOMUX_PAD(0x244, 0x028, 0x15, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_A20__FEC_RDATA2 = IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTRL),
+
+ MX25_PAD_A21__A21 = IOMUX_PAD(0x248, 0x02c, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_A21__GPIO_2_7 = IOMUX_PAD(0x248, 0x02c, 0x15, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_A21__FEC_RDATA3 = IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTRL),
+
+ MX25_PAD_A22__A22 = IOMUX_PAD(0x000, 0x030, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_A22__GPIO_2_8 = IOMUX_PAD(0x000, 0x030, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_A23__A23 = IOMUX_PAD(0x24c, 0x034, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_A23__GPIO_2_9 = IOMUX_PAD(0x24c, 0x034, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_A24__A24 = IOMUX_PAD(0x250, 0x038, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_A24__GPIO_2_10 = IOMUX_PAD(0x250, 0x038, 0x15, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_A24__FEC_RX_CLK = IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTRL),
+
+ MX25_PAD_A25__A25 = IOMUX_PAD(0x254, 0x03c, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_A25__GPIO_2_11 = IOMUX_PAD(0x254, 0x03c, 0x15, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_A25__FEC_CRS = IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTRL),
+
+ MX25_PAD_EB0__EB0 = IOMUX_PAD(0x258, 0x040, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_EB0__AUD4_TXD = IOMUX_PAD(0x258, 0x040, 0x14, 0x464, 0, NO_PAD_CTRL),
+ MX25_PAD_EB0__GPIO_2_12 = IOMUX_PAD(0x258, 0x040, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_EB1__EB1 = IOMUX_PAD(0x25c, 0x044, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_EB1__AUD4_RXD = IOMUX_PAD(0x25c, 0x044, 0x14, 0x460, 0, NO_PAD_CTRL),
+ MX25_PAD_EB1__GPIO_2_13 = IOMUX_PAD(0x25c, 0x044, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_OE__OE = IOMUX_PAD(0x260, 0x048, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_OE__AUD4_TXC = IOMUX_PAD(0x260, 0x048, 0x14, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_OE__GPIO_2_14 = IOMUX_PAD(0x260, 0x048, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_CS0__CS0 = IOMUX_PAD(0x000, 0x04c, 0x00, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CS0__GPIO_4_2 = IOMUX_PAD(0x000, 0x04c, 0x05, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_CS1__CS1 = IOMUX_PAD(0x000, 0x050, 0x00, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CS1__NF_CE3 = IOMUX_PAD(0x000, 0x050, 0x01, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CS1__GPIO_4_3 = IOMUX_PAD(0x000, 0x050, 0x05, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_CS4__CS4 = IOMUX_PAD(0x264, 0x054, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CS4__NF_CE1 = IOMUX_PAD(0x264, 0x054, 0x01, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CS4__UART5_CTS = IOMUX_PAD(0x264, 0x054, 0x13, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CS4__GPIO_3_20 = IOMUX_PAD(0x264, 0x054, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_CS5__CS5 = IOMUX_PAD(0x268, 0x058, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CS5__NF_CE2 = IOMUX_PAD(0x268, 0x058, 0x01, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CS5__UART5_RTS = IOMUX_PAD(0x268, 0x058, 0x13, 0x574, 0, NO_PAD_CTRL),
+ MX25_PAD_CS5__GPIO_3_21 = IOMUX_PAD(0x268, 0x058, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_NF_CE0__NF_CE0 = IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_NF_CE0__GPIO_3_22 = IOMUX_PAD(0x26c, 0x05c, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_ECB__ECB = IOMUX_PAD(0x270, 0x060, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_ECB__UART5_TXD_MUX = IOMUX_PAD(0x270, 0x060, 0x13, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_ECB__GPIO_3_23 = IOMUX_PAD(0x270, 0x060, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_LBA__LBA = IOMUX_PAD(0x274, 0x064, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_LBA__UART5_RXD_MUX = IOMUX_PAD(0x274, 0x064, 0x13, 0x578, 0, NO_PAD_CTRL),
+ MX25_PAD_LBA__GPIO_3_24 = IOMUX_PAD(0x274, 0x064, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_BCLK__BCLK = IOMUX_PAD(0x000, 0x068, 0x00, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_BCLK__GPIO_4_4 = IOMUX_PAD(0x000, 0x068, 0x05, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_RW__RW = IOMUX_PAD(0x278, 0x06c, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_RW__AUD4_TXFS = IOMUX_PAD(0x278, 0x06c, 0x14, 0x474, 0, NO_PAD_CTRL),
+ MX25_PAD_RW__GPIO_3_25 = IOMUX_PAD(0x278, 0x06c, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_NFWE_B__NFWE_B = IOMUX_PAD(0x000, 0x070, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_NFWE_B__GPIO_3_26 = IOMUX_PAD(0x000, 0x070, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_NFRE_B__NFRE_B = IOMUX_PAD(0x000, 0x074, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_NFRE_B__GPIO_3_27 = IOMUX_PAD(0x000, 0x074, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_NFALE__NFALE = IOMUX_PAD(0x000, 0x078, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_NFALE__GPIO_3_28 = IOMUX_PAD(0x000, 0x078, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_NFCLE__NFCLE = IOMUX_PAD(0x000, 0x07c, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_NFCLE__GPIO_3_29 = IOMUX_PAD(0x000, 0x07c, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_NFWP_B__NFWP_B = IOMUX_PAD(0x000, 0x080, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_NFWP_B__GPIO_3_30 = IOMUX_PAD(0x000, 0x080, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_NFRB__NFRB = IOMUX_PAD(0x27c, 0x084, 0x10, 0, 0, PAD_CTL_PKE),
+ MX25_PAD_NFRB__GPIO_3_31 = IOMUX_PAD(0x27c, 0x084, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_D15__D15 = IOMUX_PAD(0x280, 0x088, 0x00, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_D15__LD16 = IOMUX_PAD(0x280, 0x088, 0x01, 0, 0, PAD_CTL_SRE_FAST),
+ MX25_PAD_D15__GPIO_4_5 = IOMUX_PAD(0x280, 0x088, 0x05, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_D14__D14 = IOMUX_PAD(0x284, 0x08c, 0x00, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_D14__LD17 = IOMUX_PAD(0x284, 0x08c, 0x01, 0, 0, PAD_CTL_SRE_FAST),
+ MX25_PAD_D14__GPIO_4_6 = IOMUX_PAD(0x284, 0x08c, 0x05, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_D13__D13 = IOMUX_PAD(0x288, 0x090, 0x00, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_D13__LD18 = IOMUX_PAD(0x288, 0x090, 0x01, 0, 0, PAD_CTL_SRE_FAST),
+ MX25_PAD_D13__GPIO_4_7 = IOMUX_PAD(0x288, 0x090, 0x05, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_D12__D12 = IOMUX_PAD(0x28c, 0x094, 0x00, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_D12__GPIO_4_8 = IOMUX_PAD(0x28c, 0x094, 0x05, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_D11__D11 = IOMUX_PAD(0x290, 0x098, 0x00, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_D11__GPIO_4_9 = IOMUX_PAD(0x290, 0x098, 0x05, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_D10__D10 = IOMUX_PAD(0x294, 0x09c, 0x00, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_D10__GPIO_4_10 = IOMUX_PAD(0x294, 0x09c, 0x05, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_D10__USBOTG_OC = IOMUX_PAD(0x294, 0x09c, 0x06, 0x57c, 0, PAD_CTL_PUS_100K_UP),
+
+ MX25_PAD_D9__D9 = IOMUX_PAD(0x298, 0x0a0, 0x00, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_D9__GPIO_4_11 = IOMUX_PAD(0x298, 0x0a0, 0x05, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_D9__USBH2_PWR = IOMUX_PAD(0x298, 0x0a0, 0x06, 0, 0, PAD_CTL_PKE),
+
+ MX25_PAD_D8__D8 = IOMUX_PAD(0x29c, 0x0a4, 0x00, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_D8__GPIO_4_12 = IOMUX_PAD(0x29c, 0x0a4, 0x05, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_D8__USBH2_OC = IOMUX_PAD(0x29c, 0x0a4, 0x06, 0x580, 0, PAD_CTL_PUS_100K_UP),
+
+ MX25_PAD_D7__D7 = IOMUX_PAD(0x2a0, 0x0a8, 0x00, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_D7__GPIO_4_13 = IOMUX_PAD(0x2a0, 0x0a8, 0x05, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_D6__D6 = IOMUX_PAD(0x2a4, 0x0ac, 0x00, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_D6__GPIO_4_14 = IOMUX_PAD(0x2a4, 0x0ac, 0x05, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_D5__D5 = IOMUX_PAD(0x2a8, 0x0b0, 0x00, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_D5__GPIO_4_15 = IOMUX_PAD(0x2a8, 0x0b0, 0x05, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_D4__D4 = IOMUX_PAD(0x2ac, 0x0b4, 0x00, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_D4__GPIO_4_16 = IOMUX_PAD(0x2ac, 0x0b4, 0x05, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_D3__D3 = IOMUX_PAD(0x2b0, 0x0b8, 0x00, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_D3__GPIO_4_17 = IOMUX_PAD(0x2b0, 0x0b8, 0x05, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_D2__D2 = IOMUX_PAD(0x2b4, 0x0bc, 0x00, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_D2__GPIO_4_18 = IOMUX_PAD(0x2b4, 0x0bc, 0x05, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_D1__D1 = IOMUX_PAD(0x2b8, 0x0c0, 0x00, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_D1__GPIO_4_19 = IOMUX_PAD(0x2b8, 0x0c0, 0x05, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_D0__D0 = IOMUX_PAD(0x2bc, 0x0c4, 0x00, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_D0__GPIO_4_20 = IOMUX_PAD(0x2bc, 0x0c4, 0x05, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_LD0__LD0 = IOMUX_PAD(0x2c0, 0x0c8, 0x10, 0, 0, PAD_CTL_SRE_FAST),
+ MX25_PAD_LD0__CSI_D0 = IOMUX_PAD(0x2c0, 0x0c8, 0x12, 0x488, 0, NO_PAD_CTRL),
+ MX25_PAD_LD0__GPIO_2_15 = IOMUX_PAD(0x2c0, 0x0c8, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_LD1__LD1 = IOMUX_PAD(0x2c4, 0x0cc, 0x10, 0, 0, PAD_CTL_SRE_FAST),
+ MX25_PAD_LD1__CSI_D1 = IOMUX_PAD(0x2c4, 0x0cc, 0x12, 0x48c, 0, NO_PAD_CTRL),
+ MX25_PAD_LD1__GPIO_2_16 = IOMUX_PAD(0x2c4, 0x0cc, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_LD2__LD2 = IOMUX_PAD(0x2c8, 0x0d0, 0x10, 0, 0, PAD_CTL_SRE_FAST),
+ MX25_PAD_LD2__GPIO_2_17 = IOMUX_PAD(0x2c8, 0x0d0, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_LD3__LD3 = IOMUX_PAD(0x2cc, 0x0d4, 0x10, 0, 0, PAD_CTL_SRE_FAST),
+ MX25_PAD_LD3__GPIO_2_18 = IOMUX_PAD(0x2cc, 0x0d4, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_LD4__LD4 = IOMUX_PAD(0x2d0, 0x0d8, 0x10, 0, 0, PAD_CTL_SRE_FAST),
+ MX25_PAD_LD4__GPIO_2_19 = IOMUX_PAD(0x2d0, 0x0d8, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_LD5__LD5 = IOMUX_PAD(0x2d4, 0x0dc, 0x10, 0, 0, PAD_CTL_SRE_FAST),
+ MX25_PAD_LD5__GPIO_1_19 = IOMUX_PAD(0x2d4, 0x0dc, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_LD6__LD6 = IOMUX_PAD(0x2d8, 0x0e0, 0x10, 0, 0, PAD_CTL_SRE_FAST),
+ MX25_PAD_LD6__GPIO_1_20 = IOMUX_PAD(0x2d8, 0x0e0, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_LD7__LD7 = IOMUX_PAD(0x2dc, 0x0e4, 0x10, 0, 0, PAD_CTL_SRE_FAST),
+ MX25_PAD_LD7__GPIO_1_21 = IOMUX_PAD(0x2dc, 0x0e4, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_LD8__LD8 = IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, PAD_CTL_SRE_FAST),
+ MX25_PAD_LD8__FEC_TX_ERR = IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_LD9__LD9 = IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, PAD_CTL_SRE_FAST),
+ MX25_PAD_LD9__FEC_COL = IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTRL),
+
+ MX25_PAD_LD10__LD10 = IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, PAD_CTL_SRE_FAST),
+ MX25_PAD_LD10__FEC_RX_ER = IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTRL),
+
+ MX25_PAD_LD11__LD11 = IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, PAD_CTL_SRE_FAST),
+ MX25_PAD_LD11__FEC_RDATA2 = IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTRL),
+
+ MX25_PAD_LD12__LD12 = IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, PAD_CTL_SRE_FAST),
+ MX25_PAD_LD12__FEC_RDATA3 = IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTRL),
+
+ MX25_PAD_LD13__LD13 = IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, PAD_CTL_SRE_FAST),
+ MX25_PAD_LD13__FEC_TDATA2 = IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_LD14__LD14 = IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, PAD_CTL_SRE_FAST),
+ MX25_PAD_LD14__FEC_TDATA3 = IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_LD15__LD15 = IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, PAD_CTL_SRE_FAST),
+ MX25_PAD_LD15__FEC_RX_CLK = IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTRL),
+
+ MX25_PAD_HSYNC__HSYNC = IOMUX_PAD(0x300, 0x108, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_HSYNC__GPIO_1_22 = IOMUX_PAD(0x300, 0x108, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_VSYNC__VSYNC = IOMUX_PAD(0x304, 0x10c, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_VSYNC__GPIO_1_23 = IOMUX_PAD(0x304, 0x10c, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_LSCLK__LSCLK = IOMUX_PAD(0x308, 0x110, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_LSCLK__GPIO_1_24 = IOMUX_PAD(0x308, 0x110, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_OE_ACD__OE_ACD = IOMUX_PAD(0x30c, 0x114, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_OE_ACD__GPIO_1_25 = IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_CONTRAST__CONTRAST = IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CONTRAST__PWM4_PWMO = IOMUX_PAD(0x310, 0x118, 0x14, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CONTRAST__FEC_CRS = IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTRL),
+
+ MX25_PAD_PWM__PWM = IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_PWM__GPIO_1_26 = IOMUX_PAD(0x314, 0x11c, 0x15, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_PWM__USBH2_OC = IOMUX_PAD(0x314, 0x11c, 0x16, 0x580, 1, PAD_CTL_PUS_100K_UP),
+
+ MX25_PAD_CSI_D2__CSI_D2 = IOMUX_PAD(0x318, 0x120, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CSI_D2__UART5_RXD_MUX = IOMUX_PAD(0x318, 0x120, 0x11, 0x578, 1, NO_PAD_CTRL),
+ MX25_PAD_CSI_D2__GPIO_1_27 = IOMUX_PAD(0x318, 0x120, 0x15, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CSI_D2__CSPI3_MOSI = IOMUX_PAD(0x318, 0x120, 0x17, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_CSI_D3__CSI_D3 = IOMUX_PAD(0x31c, 0x124, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CSI_D3__GPIO_1_28 = IOMUX_PAD(0x31c, 0x124, 0x15, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CSI_D3__CSPI3_MISO = IOMUX_PAD(0x31c, 0x124, 0x17, 0x4b4, 1, NO_PAD_CTRL),
+
+ MX25_PAD_CSI_D4__CSI_D4 = IOMUX_PAD(0x320, 0x128, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CSI_D4__UART5_RTS = IOMUX_PAD(0x320, 0x128, 0x11, 0x574, 1, NO_PAD_CTRL),
+ MX25_PAD_CSI_D4__GPIO_1_29 = IOMUX_PAD(0x320, 0x128, 0x15, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CSI_D4__CSPI3_SCLK = IOMUX_PAD(0x320, 0x128, 0x17, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_CSI_D5__CSI_D5 = IOMUX_PAD(0x324, 0x12c, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CSI_D5__GPIO_1_30 = IOMUX_PAD(0x324, 0x12c, 0x15, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CSI_D5__CSPI3_RDY = IOMUX_PAD(0x324, 0x12c, 0x17, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_CSI_D6__CSI_D6 = IOMUX_PAD(0x328, 0x130, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CSI_D6__GPIO_1_31 = IOMUX_PAD(0x328, 0x130, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_CSI_D7__CSI_D7 = IOMUX_PAD(0x32c, 0x134, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CSI_D7__GPIO_1_6 = IOMUX_PAD(0x32c, 0x134, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_CSI_D8__CSI_D8 = IOMUX_PAD(0x330, 0x138, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CSI_D8__GPIO_1_7 = IOMUX_PAD(0x330, 0x138, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_CSI_D9__CSI_D9 = IOMUX_PAD(0x334, 0x13c, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CSI_D9__GPIO_4_21 = IOMUX_PAD(0x334, 0x13c, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_CSI_MCLK__CSI_MCLK = IOMUX_PAD(0x338, 0x140, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CSI_MCLK__GPIO_1_8 = IOMUX_PAD(0x338, 0x140, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_CSI_VSYNC__CSI_VSYNC = IOMUX_PAD(0x33c, 0x144, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CSI_VSYNC__GPIO_1_9 = IOMUX_PAD(0x33c, 0x144, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_CSI_HSYNC__CSI_HSYNC = IOMUX_PAD(0x340, 0x148, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CSI_HSYNC__GPIO_1_10 = IOMUX_PAD(0x340, 0x148, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_CSI_PIXCLK__CSI_PIXCLK = IOMUX_PAD(0x344, 0x14c, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CSI_PIXCLK__GPIO_1_11 = IOMUX_PAD(0x344, 0x14c, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_I2C1_CLK__I2C1_CLK = IOMUX_PAD(0x348, 0x150, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_I2C1_CLK__GPIO_1_12 = IOMUX_PAD(0x348, 0x150, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_I2C1_DAT__I2C1_DAT = IOMUX_PAD(0x34c, 0x154, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_I2C1_DAT__GPIO_1_13 = IOMUX_PAD(0x34c, 0x154, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_CSPI1_MOSI__CSPI1_MOSI = IOMUX_PAD(0x350, 0x158, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CSPI1_MOSI__GPIO_1_14 = IOMUX_PAD(0x350, 0x158, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_CSPI1_MISO__CSPI1_MISO = IOMUX_PAD(0x354, 0x15c, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CSPI1_MISO__GPIO_1_15 = IOMUX_PAD(0x354, 0x15c, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_CSPI1_SS0__CSPI1_SS0 = IOMUX_PAD(0x358, 0x160, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CSPI1_SS0__GPIO_1_16 = IOMUX_PAD(0x358, 0x160, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_CSPI1_SS1__CSPI1_SS1 = IOMUX_PAD(0x35c, 0x164, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CSPI1_SS1__I2C3_DAT = IOMUX_PAD(0x35c, 0x164, 0x11, 0x528, 1, NO_PAD_CTRL),
+ MX25_PAD_CSPI1_SS1__GPIO_1_17 = IOMUX_PAD(0x35c, 0x164, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_CSPI1_SCLK__CSPI1_SCLK = IOMUX_PAD(0x360, 0x168, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CSPI1_SCLK__GPIO_1_18 = IOMUX_PAD(0x360, 0x168, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_CSPI1_RDY__CSPI1_RDY = IOMUX_PAD(0x364, 0x16c, 0x10, 0, 0, PAD_CTL_PKE),
+ MX25_PAD_CSPI1_RDY__GPIO_2_22 = IOMUX_PAD(0x364, 0x16c, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_UART1_RXD__UART1_RXD = IOMUX_PAD(0x368, 0x170, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN),
+ MX25_PAD_UART1_RXD__GPIO_4_22 = IOMUX_PAD(0x368, 0x170, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_UART1_TXD__UART1_TXD = IOMUX_PAD(0x36c, 0x174, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_UART1_TXD__GPIO_4_23 = IOMUX_PAD(0x36c, 0x174, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_UART1_RTS__UART1_RTS = IOMUX_PAD(0x370, 0x178, 0x10, 0, 0, PAD_CTL_PUS_100K_UP),
+ MX25_PAD_UART1_RTS__CSI_D0 = IOMUX_PAD(0x370, 0x178, 0x11, 0x488, 1, NO_PAD_CTRL),
+ MX25_PAD_UART1_RTS__GPIO_4_24 = IOMUX_PAD(0x370, 0x178, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_UART1_CTS__UART1_CTS = IOMUX_PAD(0x374, 0x17c, 0x10, 0, 0, PAD_CTL_PUS_100K_UP),
+ MX25_PAD_UART1_CTS__CSI_D1 = IOMUX_PAD(0x374, 0x17c, 0x11, 0x48c, 1, NO_PAD_CTRL),
+ MX25_PAD_UART1_CTS__GPIO_4_25 = IOMUX_PAD(0x374, 0x17c, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_UART2_RXD__UART2_RXD = IOMUX_PAD(0x378, 0x180, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_UART2_RXD__GPIO_4_26 = IOMUX_PAD(0x378, 0x180, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_UART2_TXD__UART2_TXD = IOMUX_PAD(0x37c, 0x184, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_UART2_TXD__GPIO_4_27 = IOMUX_PAD(0x37c, 0x184, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_UART2_RTS__UART2_RTS = IOMUX_PAD(0x380, 0x188, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_UART2_RTS__FEC_COL = IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTRL),
+ MX25_PAD_UART2_RTS__GPIO_4_28 = IOMUX_PAD(0x380, 0x188, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_UART2_CTS__FEC_RX_ER = IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTRL),
+ MX25_PAD_UART2_CTS__UART2_CTS = IOMUX_PAD(0x384, 0x18c, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_UART2_CTS__GPIO_4_29 = IOMUX_PAD(0x384, 0x18c, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_SD1_CMD__SD1_CMD = IOMUX_PAD(0x388, 0x190, 0x10, 0, 0, PAD_CTL_PUS_47K_UP),
+ MX25_PAD_SD1_CMD__FEC_RDATA2 = IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTRL),
+ MX25_PAD_SD1_CMD__GPIO_2_23 = IOMUX_PAD(0x388, 0x190, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_SD1_CLK__SD1_CLK = IOMUX_PAD(0x38c, 0x194, 0x10, 0, 0, PAD_CTL_PUS_47K_UP),
+ MX25_PAD_SD1_CLK__FEC_RDATA3 = IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTRL),
+ MX25_PAD_SD1_CLK__GPIO_2_24 = IOMUX_PAD(0x38c, 0x194, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_SD1_DATA0__SD1_DATA0 = IOMUX_PAD(0x390, 0x198, 0x10, 0, 0, PAD_CTL_PUS_47K_UP),
+ MX25_PAD_SD1_DATA0__GPIO_2_25 = IOMUX_PAD(0x390, 0x198, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_SD1_DATA1__SD1_DATA1 = IOMUX_PAD(0x394, 0x19c, 0x10, 0, 0, PAD_CTL_PUS_47K_UP),
+ MX25_PAD_SD1_DATA1__AUD7_RXD = IOMUX_PAD(0x394, 0x19c, 0x13, 0x478, 0, NO_PAD_CTRL),
+ MX25_PAD_SD1_DATA1__GPIO_2_26 = IOMUX_PAD(0x394, 0x19c, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_SD1_DATA2__SD1_DATA2 = IOMUX_PAD(0x398, 0x1a0, 0x10, 0, 0, PAD_CTL_PUS_47K_UP),
+ MX25_PAD_SD1_DATA2__FEC_RX_CLK = IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTRL),
+ MX25_PAD_SD1_DATA2__GPIO_2_27 = IOMUX_PAD(0x398, 0x1a0, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_SD1_DATA3__SD1_DATA3 = IOMUX_PAD(0x39c, 0x1a4, 0x10, 0, 0, PAD_CTL_PUS_47K_UP),
+ MX25_PAD_SD1_DATA3__FEC_CRS = IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTRL),
+ MX25_PAD_SD1_DATA3__GPIO_2_28 = IOMUX_PAD(0x39c, 0x1a4, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_KPP_ROW0__KPP_ROW0 = IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, MX25_KPP_ROW_PAD_CTRL),
+ MX25_PAD_KPP_ROW0__GPIO_2_29 = IOMUX_PAD(0x3a0, 0x1a8, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_KPP_ROW1__KPP_ROW1 = IOMUX_PAD(0x3a4, 0x1ac, 0x10, 0, 0, MX25_KPP_ROW_PAD_CTRL),
+ MX25_PAD_KPP_ROW1__GPIO_2_30 = IOMUX_PAD(0x3a4, 0x1ac, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_KPP_ROW2__KPP_ROW2 = IOMUX_PAD(0x3a8, 0x1b0, 0x10, 0, 0, MX25_KPP_ROW_PAD_CTRL),
+ MX25_PAD_KPP_ROW2__CSI_D0 = IOMUX_PAD(0x3a8, 0x1b0, 0x13, 0x488, 2, NO_PAD_CTRL),
+ MX25_PAD_KPP_ROW2__GPIO_2_31 = IOMUX_PAD(0x3a8, 0x1b0, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_KPP_ROW3__KPP_ROW3 = IOMUX_PAD(0x3ac, 0x1b4, 0x10, 0, 0, MX25_KPP_ROW_PAD_CTRL),
+ MX25_PAD_KPP_ROW3__CSI_LD1 = IOMUX_PAD(0x3ac, 0x1b4, 0x13, 0x48c, 2, NO_PAD_CTRL),
+ MX25_PAD_KPP_ROW3__GPIO_3_0 = IOMUX_PAD(0x3ac, 0x1b4, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_KPP_COL0__KPP_COL0 = IOMUX_PAD(0x3b0, 0x1b8, 0x10, 0, 0, MX25_KPP_COL_PAD_CTRL),
+ MX25_PAD_KPP_COL0__UART4_RXD_MUX = IOMUX_PAD(0x3b0, 0x1b8, 0x11, 0x570, 1, NO_PAD_CTRL),
+ MX25_PAD_KPP_COL0__AUD5_TXD = IOMUX_PAD(0x3b0, 0x1b8, 0x12, 0, 0, PAD_CTL_PUS_100K_UP),
+ MX25_PAD_KPP_COL0__GPIO_3_1 = IOMUX_PAD(0x3b0, 0x1b8, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_KPP_COL1__KPP_COL1 = IOMUX_PAD(0x3b4, 0x1bc, 0x10, 0, 0, MX25_KPP_COL_PAD_CTRL),
+ MX25_PAD_KPP_COL1__UART4_TXD_MUX = IOMUX_PAD(0x3b4, 0x1bc, 0x11, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_KPP_COL1__AUD5_RXD = IOMUX_PAD(0x3b4, 0x1bc, 0x12, 0, 0, PAD_CTL_PUS_100K_UP),
+ MX25_PAD_KPP_COL1__GPIO_3_2 = IOMUX_PAD(0x3b4, 0x1bc, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_KPP_COL2__KPP_COL2 = IOMUX_PAD(0x3b8, 0x1c0, 0x10, 0, 0, MX25_KPP_COL_PAD_CTRL),
+ MX25_PAD_KPP_COL2__UART4_RTS = IOMUX_PAD(0x3b8, 0x1c0, 0x11, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_KPP_COL2__AUD5_TXC = IOMUX_PAD(0x3b8, 0x1c0, 0x12, 0, 0, PAD_CTL_PUS_100K_UP),
+ MX25_PAD_KPP_COL2__GPIO_3_3 = IOMUX_PAD(0x3b8, 0x1c0, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_KPP_COL3__KPP_COL3 = IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, MX25_KPP_COL_PAD_CTRL),
+ MX25_PAD_KPP_COL3__UART4_CTS = IOMUX_PAD(0x3bc, 0x1c4, 0x11, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_KPP_COL3__AUD5_TXFS = IOMUX_PAD(0x3bc, 0x1c4, 0x12, 0, 0, PAD_CTL_PUS_100K_UP),
+ MX25_PAD_KPP_COL3__GPIO_3_4 = IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_FEC_MDC__FEC_MDC = IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_FEC_MDC__AUD4_TXD = IOMUX_PAD(0x3c0, 0x1c8, 0x12, 0x464, 1, NO_PAD_CTRL),
+ MX25_PAD_FEC_MDC__GPIO_3_5 = IOMUX_PAD(0x3c0, 0x1c8, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_FEC_MDIO__FEC_MDIO = IOMUX_PAD(0x3c4, 0x1cc, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_22K_UP),
+ MX25_PAD_FEC_MDIO__AUD4_RXD = IOMUX_PAD(0x3c4, 0x1cc, 0x12, 0x460, 1, NO_PAD_CTRL),
+ MX25_PAD_FEC_MDIO__GPIO_3_6 = IOMUX_PAD(0x3c4, 0x1cc, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_FEC_TDATA0__FEC_TDATA0 = IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_FEC_TDATA0__GPIO_3_7 = IOMUX_PAD(0x3c8, 0x1d0, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_FEC_TDATA1__FEC_TDATA1 = IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_FEC_TDATA1__AUD4_TXFS = IOMUX_PAD(0x3cc, 0x1d4, 0x12, 0x474, 1, NO_PAD_CTRL),
+ MX25_PAD_FEC_TDATA1__GPIO_3_8 = IOMUX_PAD(0x3cc, 0x1d4, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_FEC_TX_EN__FEC_TX_EN = IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_FEC_TX_EN__GPIO_3_9 = IOMUX_PAD(0x3d0, 0x1d8, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_FEC_RDATA0__FEC_RDATA0 = IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
+ MX25_PAD_FEC_RDATA0__GPIO_3_10 = IOMUX_PAD(0x3d4, 0x1dc, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_FEC_RDATA1__FEC_RDATA1 = IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
+ MX25_PAD_FEC_RDATA1__GPIO_3_11 = IOMUX_PAD(0x3d8, 0x1e0, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_FEC_RX_DV__FEC_RX_DV = IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
+ MX25_PAD_FEC_RX_DV__CAN2_RX = IOMUX_PAD(0x3dc, 0x1e4, 0x14, 0x484, 0, PAD_CTL_PUS_22K_UP),
+ MX25_PAD_FEC_RX_DV__GPIO_3_12 = IOMUX_PAD(0x3dc, 0x1e4, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_FEC_TX_CLK__FEC_TX_CLK = IOMUX_PAD(0x3e0, 0x1e8, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
+ MX25_PAD_FEC_TX_CLK__GPIO_3_13 = IOMUX_PAD(0x3e0, 0x1e8, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_RTCK__RTCK = IOMUX_PAD(0x3e4, 0x1ec, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_RTCK__OWIRE = IOMUX_PAD(0x3e4, 0x1ec, 0x11, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_RTCK__GPIO_3_14 = IOMUX_PAD(0x3e4, 0x1ec, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_DE_B__DE_B = IOMUX_PAD(0x3ec, 0x1f0, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_DE_B__GPIO_2_20 = IOMUX_PAD(0x3ec, 0x1f0, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_TDO__TDO = IOMUX_PAD(0x3e8, 0x000, 0x00, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_GPIO_A__GPIO_A = IOMUX_PAD(0x3f0, 0x1f4, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_GPIO_A__CAN1_TX = IOMUX_PAD(0x3f0, 0x1f4, 0x16, 0, 0, PAD_CTL_PUS_22K_UP),
+ MX25_PAD_GPIO_A__USBOTG_PWR = IOMUX_PAD(0x3f0, 0x1f4, 0x12, 0, 0, PAD_CTL_PKE),
+
+ MX25_PAD_GPIO_B__GPIO_B = IOMUX_PAD(0x3f4, 0x1f8, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_GPIO_B__CAN1_RX = IOMUX_PAD(0x3f4, 0x1f8, 0x16, 0x480, 1, PAD_CTL_PUS_22K_UP),
+ MX25_PAD_GPIO_B__USBOTG_OC = IOMUX_PAD(0x3f4, 0x1f8, 0x12, 0x57c, 1, PAD_CTL_PUS_100K_UP),
+
+ MX25_PAD_GPIO_C__GPIO_C = IOMUX_PAD(0x3f8, 0x1fc, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_GPIO_C__CAN2_TX = IOMUX_PAD(0x3f8, 0x1fc, 0x16, 0, 0, PAD_CTL_PUS_22K_UP),
+
+ MX25_PAD_GPIO_D__GPIO_D = IOMUX_PAD(0x3fc, 0x200, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_GPIO_E__LD16 = IOMUX_PAD(0x400, 0x204, 0x02, 0, 0, PAD_CTL_SRE_FAST),
+ MX25_PAD_GPIO_D__CAN2_RX = IOMUX_PAD(0x3fc, 0x200, 0x16, 0x484, 1, PAD_CTL_PUS_22K_UP),
+
+ MX25_PAD_GPIO_E__GPIO_E = IOMUX_PAD(0x400, 0x204, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_GPIO_F__LD17 = IOMUX_PAD(0x404, 0x208, 0x02, 0, 0, PAD_CTL_SRE_FAST),
+ MX25_PAD_GPIO_E__I2C3_CLK = IOMUX_PAD(0x400, 0x204, 0x11, 0x524, 2, NO_PAD_CTRL),
+ MX25_PAD_GPIO_E__AUD7_TXD = IOMUX_PAD(0x400, 0x204, 0x14, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_GPIO_F__GPIO_F = IOMUX_PAD(0x404, 0x208, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_GPIO_F__AUD7_TXC = IOMUX_PAD(0x404, 0x208, 0x14, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_EXT_ARMCLK__EXT_ARMCLK = IOMUX_PAD(0x000, 0x20c, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_EXT_ARMCLK__GPIO_3_15 = IOMUX_PAD(0x000, 0x20c, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK = IOMUX_PAD(0x000, 0x210, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_UPLL_BYPCLK__GPIO_3_16 = IOMUX_PAD(0x000, 0x210, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_VSTBY_REQ__VSTBY_REQ = IOMUX_PAD(0x408, 0x214, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_VSTBY_REQ__AUD7_TXFS = IOMUX_PAD(0x408, 0x214, 0x14, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_VSTBY_REQ__GPIO_3_17 = IOMUX_PAD(0x408, 0x214, 0x15, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_VSTBY_ACK__VSTBY_ACK = IOMUX_PAD(0x40c, 0x218, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_VSTBY_ACK__GPIO_3_18 = IOMUX_PAD(0x40c, 0x218, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_POWER_FAIL__POWER_FAIL = IOMUX_PAD(0x410, 0x21c, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_POWER_FAIL__AUD7_RXD = IOMUX_PAD(0x410, 0x21c, 0x14, 0x478, 1, NO_PAD_CTRL),
+ MX25_PAD_POWER_FAIL__GPIO_3_19 = IOMUX_PAD(0x410, 0x21c, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_CLKO__CLKO = IOMUX_PAD(0x414, 0x220, 0x10, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CLKO__GPIO_2_21 = IOMUX_PAD(0x414, 0x220, 0x15, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_BOOT_MODE0__BOOT_MODE0 = IOMUX_PAD(0x000, 0x224, 0x00, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_BOOT_MODE0__GPIO_4_30 = IOMUX_PAD(0x000, 0x224, 0x05, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_BOOT_MODE1__BOOT_MODE1 = IOMUX_PAD(0x000, 0x228, 0x00, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_BOOT_MODE1__GPIO_4_31 = IOMUX_PAD(0x000, 0x228, 0x05, 0, 0, NO_PAD_CTRL),
+
+ MX25_PAD_CTL_GRP_DVS_MISC = IOMUX_PAD(0x418, 0x000, 0, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CTL_GRP_DSE_FEC = IOMUX_PAD(0x41c, 0x000, 0, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CTL_GRP_DVS_JTAG = IOMUX_PAD(0x420, 0x000, 0, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CTL_GRP_DSE_NFC = IOMUX_PAD(0x424, 0x000, 0, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CTL_GRP_DSE_CSI = IOMUX_PAD(0x428, 0x000, 0, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CTL_GRP_DSE_WEIM = IOMUX_PAD(0x42c, 0x000, 0, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CTL_GRP_DSE_DDR = IOMUX_PAD(0x430, 0x000, 0, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CTL_GRP_DVS_CRM = IOMUX_PAD(0x434, 0x000, 0, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CTL_GRP_DSE_KPP = IOMUX_PAD(0x438, 0x000, 0, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CTL_GRP_DSE_SDHC1 = IOMUX_PAD(0x43c, 0x000, 0, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CTL_GRP_DSE_LCD = IOMUX_PAD(0x440, 0x000, 0, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CTL_GRP_DSE_UART = IOMUX_PAD(0x444, 0x000, 0, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CTL_GRP_DVS_NFC = IOMUX_PAD(0x448, 0x000, 0, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CTL_GRP_DVS_CSI = IOMUX_PAD(0x44c, 0x000, 0, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CTL_GRP_DSE_CSPI1 = IOMUX_PAD(0x450, 0x000, 0, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CTL_GRP_DDRTYPE = IOMUX_PAD(0x454, 0x000, 0, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CTL_GRP_DVS_SDHC1 = IOMUX_PAD(0x458, 0x000, 0, 0, 0, NO_PAD_CTRL),
+ MX25_PAD_CTL_GRP_DVS_LCD = IOMUX_PAD(0x45c, 0x000, 0, 0, 0, NO_PAD_CTRL),
+};
+
+#endif /* __IOMUX_MX25_H__ */
diff --git a/arch/arm/include/asm/arch-mx27/imx-regs.h b/arch/arm/include/asm/arch-mx27/imx-regs.h
index 2f6c823..8867e9f 100644
--- a/arch/arm/include/asm/arch-mx27/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx27/imx-regs.h
@@ -176,7 +176,7 @@
u32 iim_sdat;
u32 iim_prev;
u32 iim_srev;
- u32 iim_prog_p;
+ u32 iim_prg_p;
u32 iim_scs0;
u32 iim_scs1;
u32 iim_scs2;
@@ -222,6 +222,7 @@
#define IMX_PLL_BASE (0x27000 + IMX_IO_BASE)
#define IMX_SYSTEM_CTL_BASE (0x27800 + IMX_IO_BASE)
#define IMX_IIM_BASE (0x28000 + IMX_IO_BASE)
+#define IIM_BASE_ADDR IMX_IIM_BASE
#define IMX_FEC_BASE (0x2b000 + IMX_IO_BASE)
#define IMX_ESD_BASE (0xD8001000)
diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h
index 3f58318..67fddac 100644
--- a/arch/arm/include/asm/arch-mx31/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx31/imx-regs.h
@@ -68,7 +68,7 @@
u32 test;
};
-/* IIM Control Registers */
+/* IIM control registers */
struct iim_regs {
u32 iim_stat;
u32 iim_statm;
@@ -80,11 +80,28 @@
u32 iim_sdat;
u32 iim_prev;
u32 iim_srev;
- u32 iim_prog_p;
+ u32 iim_prg_p;
u32 iim_scs0;
u32 iim_scs1;
u32 iim_scs2;
u32 iim_scs3;
+ u32 res[0x1f1];
+ struct fuse_bank {
+ u32 fuse_regs[0x20];
+ u32 fuse_rsvd[0xe0];
+ } bank[3];
+};
+
+struct fuse_bank0_regs {
+ u32 fuse0_5[6];
+ u32 usr;
+ u32 fuse7_15[9];
+};
+
+struct fuse_bank2_regs {
+ u32 fuse0;
+ u32 uid[8];
+ u32 fuse9_15[7];
};
struct iomuxc_regs {
@@ -557,6 +574,7 @@
#define CCMR_CKIH (2 << 1)
#define MX31_IIM_BASE_ADDR 0x5001C000
+#define IIM_BASE_ADDR MX31_IIM_BASE_ADDR
#define PDR0_CSI_PODF(x) (((x) & 0x3f) << 26)
#define PDR0_CSI_PRDF(x) (((x) & 0x7) << 23)
diff --git a/arch/arm/include/asm/arch-mx35/imx-regs.h b/arch/arm/include/asm/arch-mx35/imx-regs.h
index 7f337be..63c6e24 100644
--- a/arch/arm/include/asm/arch-mx35/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx35/imx-regs.h
@@ -262,11 +262,28 @@
u32 iim_sdat;
u32 iim_prev;
u32 iim_srev;
- u32 iim_prog_p;
+ u32 iim_prg_p;
u32 iim_scs0;
u32 iim_scs1;
u32 iim_scs2;
u32 iim_scs3;
+ u32 res1[0x1f1];
+ struct fuse_bank {
+ u32 fuse_regs[0x20];
+ u32 fuse_rsvd[0xe0];
+ } bank[3];
+};
+
+struct fuse_bank0_regs {
+ u32 fuse0_7[8];
+ u32 uid[8];
+ u32 fuse16_31[0x10];
+};
+
+struct fuse_bank1_regs {
+ u32 fuse0_21[0x16];
+ u32 usr;
+ u32 fuse23_31[9];
};
/* General Purpose Timer (GPT) registers */
diff --git a/arch/arm/include/asm/arch-mx35/iomux-mx35.h b/arch/arm/include/asm/arch-mx35/iomux-mx35.h
new file mode 100644
index 0000000..8016cb3
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx35/iomux-mx35.h
@@ -0,0 +1,1276 @@
+/*
+ * (C) Copyright 2013 ADVANSEE
+ * Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
+ *
+ * Based on mainline Linux i.MX iomux-mx35.h file:
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __IOMUX_MX35_H__
+#define __IOMUX_MX35_H__
+
+#include <asm/imx-common/iomux-v3.h>
+
+/*
+ * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named GPIO<unit>_<num>
+ * See also iomux-v3.h
+ */
+
+/* PAD MUX ALT INPSE PATH PADCTRL */
+enum {
+ MX35_PAD_CAPTURE__GPT_CAPIN1 = IOMUX_PAD(0x328, 0x004, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CAPTURE__GPT_CMPOUT2 = IOMUX_PAD(0x328, 0x004, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CAPTURE__CSPI2_SS1 = IOMUX_PAD(0x328, 0x004, 2, 0x7f4, 0, NO_PAD_CTRL),
+ MX35_PAD_CAPTURE__EPIT1_EPITO = IOMUX_PAD(0x328, 0x004, 3, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CAPTURE__CCM_CLK32K = IOMUX_PAD(0x328, 0x004, 4, 0x7d0, 0, NO_PAD_CTRL),
+ MX35_PAD_CAPTURE__GPIO1_4 = IOMUX_PAD(0x328, 0x004, 5, 0x850, 0, NO_PAD_CTRL),
+
+ MX35_PAD_COMPARE__GPT_CMPOUT1 = IOMUX_PAD(0x32c, 0x008, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_COMPARE__GPT_CAPIN2 = IOMUX_PAD(0x32c, 0x008, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_COMPARE__GPT_CMPOUT3 = IOMUX_PAD(0x32c, 0x008, 2, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_COMPARE__EPIT2_EPITO = IOMUX_PAD(0x32c, 0x008, 3, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_COMPARE__GPIO1_5 = IOMUX_PAD(0x32c, 0x008, 5, 0x854, 0, NO_PAD_CTRL),
+ MX35_PAD_COMPARE__SDMA_EXTDMA_2 = IOMUX_PAD(0x32c, 0x008, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_WDOG_RST__WDOG_WDOG_B = IOMUX_PAD(0x330, 0x00c, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_WDOG_RST__IPU_FLASH_STROBE = IOMUX_PAD(0x330, 0x00c, 3, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_WDOG_RST__GPIO1_6 = IOMUX_PAD(0x330, 0x00c, 5, 0x858, 0, NO_PAD_CTRL),
+
+ MX35_PAD_GPIO1_0__GPIO1_0 = IOMUX_PAD(0x334, 0x010, 0, 0x82c, 0, NO_PAD_CTRL),
+ MX35_PAD_GPIO1_0__CCM_PMIC_RDY = IOMUX_PAD(0x334, 0x010, 1, 0x7d4, 0, NO_PAD_CTRL),
+ MX35_PAD_GPIO1_0__OWIRE_LINE = IOMUX_PAD(0x334, 0x010, 2, 0x990, 0, NO_PAD_CTRL),
+ MX35_PAD_GPIO1_0__SDMA_EXTDMA_0 = IOMUX_PAD(0x334, 0x010, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_GPIO1_1__GPIO1_1 = IOMUX_PAD(0x338, 0x014, 0, 0x838, 0, NO_PAD_CTRL),
+ MX35_PAD_GPIO1_1__PWM_PWMO = IOMUX_PAD(0x338, 0x014, 2, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_GPIO1_1__CSPI1_SS2 = IOMUX_PAD(0x338, 0x014, 3, 0x7d8, 0, NO_PAD_CTRL),
+ MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT = IOMUX_PAD(0x338, 0x014, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_GPIO1_1__SDMA_EXTDMA_1 = IOMUX_PAD(0x338, 0x014, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_GPIO2_0__GPIO2_0 = IOMUX_PAD(0x33c, 0x018, 0, 0x868, 0, NO_PAD_CTRL),
+ MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK = IOMUX_PAD(0x33c, 0x018, 1, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_GPIO3_0__GPIO3_0 = IOMUX_PAD(0x340, 0x01c, 0, 0x8e8, 0, NO_PAD_CTRL),
+ MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK = IOMUX_PAD(0x340, 0x01c, 1, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_RESET_IN_B__CCM_RESET_IN_B = IOMUX_PAD(0x344, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_POR_B__CCM_POR_B = IOMUX_PAD(0x348, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_CLKO__CCM_CLKO = IOMUX_PAD(0x34c, 0x020, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CLKO__GPIO1_8 = IOMUX_PAD(0x34c, 0x020, 5, 0x860, 0, NO_PAD_CTRL),
+
+ MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0 = IOMUX_PAD(0x350, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1 = IOMUX_PAD(0x354, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0 = IOMUX_PAD(0x358, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1 = IOMUX_PAD(0x35c, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26 = IOMUX_PAD(0x360, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_VSTBY__CCM_VSTBY = IOMUX_PAD(0x364, 0x024, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_VSTBY__GPIO1_7 = IOMUX_PAD(0x364, 0x024, 5, 0x85c, 0, NO_PAD_CTRL),
+
+ MX35_PAD_A0__EMI_EIM_DA_L_0 = IOMUX_PAD(0x368, 0x028, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_A1__EMI_EIM_DA_L_1 = IOMUX_PAD(0x36c, 0x02c, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_A2__EMI_EIM_DA_L_2 = IOMUX_PAD(0x370, 0x030, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_A3__EMI_EIM_DA_L_3 = IOMUX_PAD(0x374, 0x034, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_A4__EMI_EIM_DA_L_4 = IOMUX_PAD(0x378, 0x038, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_A5__EMI_EIM_DA_L_5 = IOMUX_PAD(0x37c, 0x03c, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_A6__EMI_EIM_DA_L_6 = IOMUX_PAD(0x380, 0x040, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_A7__EMI_EIM_DA_L_7 = IOMUX_PAD(0x384, 0x044, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_A8__EMI_EIM_DA_H_8 = IOMUX_PAD(0x388, 0x048, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_A9__EMI_EIM_DA_H_9 = IOMUX_PAD(0x38c, 0x04c, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_A10__EMI_EIM_DA_H_10 = IOMUX_PAD(0x390, 0x050, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_MA10__EMI_MA10 = IOMUX_PAD(0x394, 0x054, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_A11__EMI_EIM_DA_H_11 = IOMUX_PAD(0x398, 0x058, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_A12__EMI_EIM_DA_H_12 = IOMUX_PAD(0x39c, 0x05c, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_A13__EMI_EIM_DA_H_13 = IOMUX_PAD(0x3a0, 0x060, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_A14__EMI_EIM_DA_H2_14 = IOMUX_PAD(0x3a4, 0x064, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_A15__EMI_EIM_DA_H2_15 = IOMUX_PAD(0x3a8, 0x068, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_A16__EMI_EIM_A_16 = IOMUX_PAD(0x3ac, 0x06c, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_A17__EMI_EIM_A_17 = IOMUX_PAD(0x3b0, 0x070, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_A18__EMI_EIM_A_18 = IOMUX_PAD(0x3b4, 0x074, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_A19__EMI_EIM_A_19 = IOMUX_PAD(0x3b8, 0x078, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_A20__EMI_EIM_A_20 = IOMUX_PAD(0x3bc, 0x07c, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_A21__EMI_EIM_A_21 = IOMUX_PAD(0x3c0, 0x080, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_A22__EMI_EIM_A_22 = IOMUX_PAD(0x3c4, 0x084, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_A23__EMI_EIM_A_23 = IOMUX_PAD(0x3c8, 0x088, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_A24__EMI_EIM_A_24 = IOMUX_PAD(0x3cc, 0x08c, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_A25__EMI_EIM_A_25 = IOMUX_PAD(0x3d0, 0x090, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SDBA1__EMI_EIM_SDBA1 = IOMUX_PAD(0x3d4, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SDBA0__EMI_EIM_SDBA0 = IOMUX_PAD(0x3d8, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD0__EMI_DRAM_D_0 = IOMUX_PAD(0x3dc, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD1__EMI_DRAM_D_1 = IOMUX_PAD(0x3e0, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD2__EMI_DRAM_D_2 = IOMUX_PAD(0x3e4, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD3__EMI_DRAM_D_3 = IOMUX_PAD(0x3e8, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD4__EMI_DRAM_D_4 = IOMUX_PAD(0x3ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD5__EMI_DRAM_D_5 = IOMUX_PAD(0x3f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD6__EMI_DRAM_D_6 = IOMUX_PAD(0x3f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD7__EMI_DRAM_D_7 = IOMUX_PAD(0x3f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD8__EMI_DRAM_D_8 = IOMUX_PAD(0x3fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD9__EMI_DRAM_D_9 = IOMUX_PAD(0x400, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD10__EMI_DRAM_D_10 = IOMUX_PAD(0x404, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD11__EMI_DRAM_D_11 = IOMUX_PAD(0x408, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD12__EMI_DRAM_D_12 = IOMUX_PAD(0x40c, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD13__EMI_DRAM_D_13 = IOMUX_PAD(0x410, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD14__EMI_DRAM_D_14 = IOMUX_PAD(0x414, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD15__EMI_DRAM_D_15 = IOMUX_PAD(0x418, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD16__EMI_DRAM_D_16 = IOMUX_PAD(0x41c, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD17__EMI_DRAM_D_17 = IOMUX_PAD(0x420, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD18__EMI_DRAM_D_18 = IOMUX_PAD(0x424, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD19__EMI_DRAM_D_19 = IOMUX_PAD(0x428, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD20__EMI_DRAM_D_20 = IOMUX_PAD(0x42c, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD21__EMI_DRAM_D_21 = IOMUX_PAD(0x430, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD22__EMI_DRAM_D_22 = IOMUX_PAD(0x434, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD23__EMI_DRAM_D_23 = IOMUX_PAD(0x438, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD24__EMI_DRAM_D_24 = IOMUX_PAD(0x43c, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD25__EMI_DRAM_D_25 = IOMUX_PAD(0x440, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD26__EMI_DRAM_D_26 = IOMUX_PAD(0x444, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD27__EMI_DRAM_D_27 = IOMUX_PAD(0x448, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD28__EMI_DRAM_D_28 = IOMUX_PAD(0x44c, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD29__EMI_DRAM_D_29 = IOMUX_PAD(0x450, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD30__EMI_DRAM_D_30 = IOMUX_PAD(0x454, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD31__EMI_DRAM_D_31 = IOMUX_PAD(0x458, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_DQM0__EMI_DRAM_DQM_0 = IOMUX_PAD(0x45c, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_DQM1__EMI_DRAM_DQM_1 = IOMUX_PAD(0x460, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_DQM2__EMI_DRAM_DQM_2 = IOMUX_PAD(0x464, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_DQM3__EMI_DRAM_DQM_3 = IOMUX_PAD(0x468, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_EB0__EMI_EIM_EB0_B = IOMUX_PAD(0x46c, 0x094, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_EB1__EMI_EIM_EB1_B = IOMUX_PAD(0x470, 0x098, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_OE__EMI_EIM_OE = IOMUX_PAD(0x474, 0x09c, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_CS0__EMI_EIM_CS0 = IOMUX_PAD(0x478, 0x0a0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_CS1__EMI_EIM_CS1 = IOMUX_PAD(0x47c, 0x0a4, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CS1__EMI_NANDF_CE3 = IOMUX_PAD(0x47c, 0x0a4, 3, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_CS2__EMI_EIM_CS2 = IOMUX_PAD(0x480, 0x0a8, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_CS3__EMI_EIM_CS3 = IOMUX_PAD(0x484, 0x0ac, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_CS4__EMI_EIM_CS4 = IOMUX_PAD(0x488, 0x0b0, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CS4__EMI_DTACK_B = IOMUX_PAD(0x488, 0x0b0, 1, 0x800, 0, NO_PAD_CTRL),
+ MX35_PAD_CS4__EMI_NANDF_CE1 = IOMUX_PAD(0x488, 0x0b0, 3, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CS4__GPIO1_20 = IOMUX_PAD(0x488, 0x0b0, 5, 0x83c, 0, NO_PAD_CTRL),
+
+ MX35_PAD_CS5__EMI_EIM_CS5 = IOMUX_PAD(0x48c, 0x0b4, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CS5__CSPI2_SS2 = IOMUX_PAD(0x48c, 0x0b4, 1, 0x7f8, 0, NO_PAD_CTRL),
+ MX35_PAD_CS5__CSPI1_SS2 = IOMUX_PAD(0x48c, 0x0b4, 2, 0x7d8, 1, NO_PAD_CTRL),
+ MX35_PAD_CS5__EMI_NANDF_CE2 = IOMUX_PAD(0x48c, 0x0b4, 3, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CS5__GPIO1_21 = IOMUX_PAD(0x48c, 0x0b4, 5, 0x840, 0, NO_PAD_CTRL),
+
+ MX35_PAD_NF_CE0__EMI_NANDF_CE0 = IOMUX_PAD(0x490, 0x0b8, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_NF_CE0__GPIO1_22 = IOMUX_PAD(0x490, 0x0b8, 5, 0x844, 0, NO_PAD_CTRL),
+
+ MX35_PAD_ECB__EMI_EIM_ECB = IOMUX_PAD(0x494, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_LBA__EMI_EIM_LBA = IOMUX_PAD(0x498, 0x0bc, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_BCLK__EMI_EIM_BCLK = IOMUX_PAD(0x49c, 0x0c0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_RW__EMI_EIM_RW = IOMUX_PAD(0x4a0, 0x0c4, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_RAS__EMI_DRAM_RAS = IOMUX_PAD(0x4a4, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_CAS__EMI_DRAM_CAS = IOMUX_PAD(0x4a8, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SDWE__EMI_DRAM_SDWE = IOMUX_PAD(0x4ac, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0 = IOMUX_PAD(0x4b0, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1 = IOMUX_PAD(0x4b4, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SDCLK__EMI_DRAM_SDCLK = IOMUX_PAD(0x4b8, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SDQS0__EMI_DRAM_SDQS_0 = IOMUX_PAD(0x4bc, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SDQS1__EMI_DRAM_SDQS_1 = IOMUX_PAD(0x4c0, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SDQS2__EMI_DRAM_SDQS_2 = IOMUX_PAD(0x4c4, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SDQS3__EMI_DRAM_SDQS_3 = IOMUX_PAD(0x4c8, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_NFWE_B__EMI_NANDF_WE_B = IOMUX_PAD(0x4cc, 0x0c8, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3 = IOMUX_PAD(0x4cc, 0x0c8, 1, 0x9d8, 0, NO_PAD_CTRL),
+ MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC = IOMUX_PAD(0x4cc, 0x0c8, 2, 0x924, 0, NO_PAD_CTRL),
+ MX35_PAD_NFWE_B__GPIO2_18 = IOMUX_PAD(0x4cc, 0x0c8, 5, 0x88c, 0, NO_PAD_CTRL),
+ MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0 = IOMUX_PAD(0x4cc, 0x0c8, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_NFRE_B__EMI_NANDF_RE_B = IOMUX_PAD(0x4d0, 0x0cc, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR = IOMUX_PAD(0x4d0, 0x0cc, 1, 0x9ec, 0, NO_PAD_CTRL),
+ MX35_PAD_NFRE_B__IPU_DISPB_BCLK = IOMUX_PAD(0x4d0, 0x0cc, 2, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_NFRE_B__GPIO2_19 = IOMUX_PAD(0x4d0, 0x0cc, 5, 0x890, 0, NO_PAD_CTRL),
+ MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1 = IOMUX_PAD(0x4d0, 0x0cc, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_NFALE__EMI_NANDF_ALE = IOMUX_PAD(0x4d4, 0x0d0, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_NFALE__USB_TOP_USBH2_STP = IOMUX_PAD(0x4d4, 0x0d0, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_NFALE__IPU_DISPB_CS0 = IOMUX_PAD(0x4d4, 0x0d0, 2, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_NFALE__GPIO2_20 = IOMUX_PAD(0x4d4, 0x0d0, 5, 0x898, 0, NO_PAD_CTRL),
+ MX35_PAD_NFALE__ARM11P_TOP_TRACE_2 = IOMUX_PAD(0x4d4, 0x0d0, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_NFCLE__EMI_NANDF_CLE = IOMUX_PAD(0x4d8, 0x0d4, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_NFCLE__USB_TOP_USBH2_NXT = IOMUX_PAD(0x4d8, 0x0d4, 1, 0x9f0, 0, NO_PAD_CTRL),
+ MX35_PAD_NFCLE__IPU_DISPB_PAR_RS = IOMUX_PAD(0x4d8, 0x0d4, 2, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_NFCLE__GPIO2_21 = IOMUX_PAD(0x4d8, 0x0d4, 5, 0x89c, 0, NO_PAD_CTRL),
+ MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3 = IOMUX_PAD(0x4d8, 0x0d4, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_NFWP_B__EMI_NANDF_WP_B = IOMUX_PAD(0x4dc, 0x0d8, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7 = IOMUX_PAD(0x4dc, 0x0d8, 1, 0x9e8, 0, NO_PAD_CTRL),
+ MX35_PAD_NFWP_B__IPU_DISPB_WR = IOMUX_PAD(0x4dc, 0x0d8, 2, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_NFWP_B__GPIO2_22 = IOMUX_PAD(0x4dc, 0x0d8, 5, 0x8a0, 0, NO_PAD_CTRL),
+ MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL = IOMUX_PAD(0x4dc, 0x0d8, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_NFRB__EMI_NANDF_RB = IOMUX_PAD(0x4e0, 0x0dc, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_NFRB__IPU_DISPB_RD = IOMUX_PAD(0x4e0, 0x0dc, 2, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_NFRB__GPIO2_23 = IOMUX_PAD(0x4e0, 0x0dc, 5, 0x8a4, 0, NO_PAD_CTRL),
+ MX35_PAD_NFRB__ARM11P_TOP_TRCLK = IOMUX_PAD(0x4e0, 0x0dc, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_D15__EMI_EIM_D_15 = IOMUX_PAD(0x4e4, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_D14__EMI_EIM_D_14 = IOMUX_PAD(0x4e8, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_D13__EMI_EIM_D_13 = IOMUX_PAD(0x4ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_D12__EMI_EIM_D_12 = IOMUX_PAD(0x4f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_D11__EMI_EIM_D_11 = IOMUX_PAD(0x4f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_D10__EMI_EIM_D_10 = IOMUX_PAD(0x4f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_D9__EMI_EIM_D_9 = IOMUX_PAD(0x4fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_D8__EMI_EIM_D_8 = IOMUX_PAD(0x500, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_D7__EMI_EIM_D_7 = IOMUX_PAD(0x504, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_D6__EMI_EIM_D_6 = IOMUX_PAD(0x508, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_D5__EMI_EIM_D_5 = IOMUX_PAD(0x50c, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_D4__EMI_EIM_D_4 = IOMUX_PAD(0x510, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_D3__EMI_EIM_D_3 = IOMUX_PAD(0x514, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_D2__EMI_EIM_D_2 = IOMUX_PAD(0x518, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_D1__EMI_EIM_D_1 = IOMUX_PAD(0x51c, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_D0__EMI_EIM_D_0 = IOMUX_PAD(0x520, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_CSI_D8__IPU_CSI_D_8 = IOMUX_PAD(0x524, 0x0e0, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CSI_D8__KPP_COL_0 = IOMUX_PAD(0x524, 0x0e0, 1, 0x950, 0, NO_PAD_CTRL),
+ MX35_PAD_CSI_D8__GPIO1_20 = IOMUX_PAD(0x524, 0x0e0, 5, 0x83c, 1, NO_PAD_CTRL),
+ MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13 = IOMUX_PAD(0x524, 0x0e0, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_CSI_D9__IPU_CSI_D_9 = IOMUX_PAD(0x528, 0x0e4, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CSI_D9__KPP_COL_1 = IOMUX_PAD(0x528, 0x0e4, 1, 0x954, 0, NO_PAD_CTRL),
+ MX35_PAD_CSI_D9__GPIO1_21 = IOMUX_PAD(0x528, 0x0e4, 5, 0x840, 1, NO_PAD_CTRL),
+ MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14 = IOMUX_PAD(0x528, 0x0e4, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_CSI_D10__IPU_CSI_D_10 = IOMUX_PAD(0x52c, 0x0e8, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CSI_D10__KPP_COL_2 = IOMUX_PAD(0x52c, 0x0e8, 1, 0x958, 0, NO_PAD_CTRL),
+ MX35_PAD_CSI_D10__GPIO1_22 = IOMUX_PAD(0x52c, 0x0e8, 5, 0x844, 1, NO_PAD_CTRL),
+ MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15 = IOMUX_PAD(0x52c, 0x0e8, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_CSI_D11__IPU_CSI_D_11 = IOMUX_PAD(0x530, 0x0ec, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CSI_D11__KPP_COL_3 = IOMUX_PAD(0x530, 0x0ec, 1, 0x95c, 0, NO_PAD_CTRL),
+ MX35_PAD_CSI_D11__GPIO1_23 = IOMUX_PAD(0x530, 0x0ec, 5, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_CSI_D12__IPU_CSI_D_12 = IOMUX_PAD(0x534, 0x0f0, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CSI_D12__KPP_ROW_0 = IOMUX_PAD(0x534, 0x0f0, 1, 0x970, 0, NO_PAD_CTRL),
+ MX35_PAD_CSI_D12__GPIO1_24 = IOMUX_PAD(0x534, 0x0f0, 5, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_CSI_D13__IPU_CSI_D_13 = IOMUX_PAD(0x538, 0x0f4, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CSI_D13__KPP_ROW_1 = IOMUX_PAD(0x538, 0x0f4, 1, 0x974, 0, NO_PAD_CTRL),
+ MX35_PAD_CSI_D13__GPIO1_25 = IOMUX_PAD(0x538, 0x0f4, 5, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_CSI_D14__IPU_CSI_D_14 = IOMUX_PAD(0x53c, 0x0f8, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CSI_D14__KPP_ROW_2 = IOMUX_PAD(0x53c, 0x0f8, 1, 0x978, 0, NO_PAD_CTRL),
+ MX35_PAD_CSI_D14__GPIO1_26 = IOMUX_PAD(0x53c, 0x0f8, 5, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_CSI_D15__IPU_CSI_D_15 = IOMUX_PAD(0x540, 0x0fc, 0, 0x97c, 0, NO_PAD_CTRL),
+ MX35_PAD_CSI_D15__KPP_ROW_3 = IOMUX_PAD(0x540, 0x0fc, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CSI_D15__GPIO1_27 = IOMUX_PAD(0x540, 0x0fc, 5, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_CSI_MCLK__IPU_CSI_MCLK = IOMUX_PAD(0x544, 0x100, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CSI_MCLK__GPIO1_28 = IOMUX_PAD(0x544, 0x100, 5, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC = IOMUX_PAD(0x548, 0x104, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CSI_VSYNC__GPIO1_29 = IOMUX_PAD(0x548, 0x104, 5, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC = IOMUX_PAD(0x54c, 0x108, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CSI_HSYNC__GPIO1_30 = IOMUX_PAD(0x54c, 0x108, 5, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK = IOMUX_PAD(0x550, 0x10c, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CSI_PIXCLK__GPIO1_31 = IOMUX_PAD(0x550, 0x10c, 5, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_I2C1_CLK__I2C1_SCL = IOMUX_PAD(0x554, 0x110, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_I2C1_CLK__GPIO2_24 = IOMUX_PAD(0x554, 0x110, 5, 0x8a8, 0, NO_PAD_CTRL),
+ MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK = IOMUX_PAD(0x554, 0x110, 6, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_I2C1_DAT__I2C1_SDA = IOMUX_PAD(0x558, 0x114, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_I2C1_DAT__GPIO2_25 = IOMUX_PAD(0x558, 0x114, 5, 0x8ac, 0, NO_PAD_CTRL),
+
+ MX35_PAD_I2C2_CLK__I2C2_SCL = IOMUX_PAD(0x55c, 0x118, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_I2C2_CLK__CAN1_TXCAN = IOMUX_PAD(0x55c, 0x118, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR = IOMUX_PAD(0x55c, 0x118, 2, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_I2C2_CLK__GPIO2_26 = IOMUX_PAD(0x55c, 0x118, 5, 0x8b0, 0, NO_PAD_CTRL),
+ MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2 = IOMUX_PAD(0x55c, 0x118, 6, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_I2C2_DAT__I2C2_SDA = IOMUX_PAD(0x560, 0x11c, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_I2C2_DAT__CAN1_RXCAN = IOMUX_PAD(0x560, 0x11c, 1, 0x7c8, 0, NO_PAD_CTRL),
+ MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC = IOMUX_PAD(0x560, 0x11c, 2, 0x9f4, 0, NO_PAD_CTRL),
+ MX35_PAD_I2C2_DAT__GPIO2_27 = IOMUX_PAD(0x560, 0x11c, 5, 0x8b4, 0, NO_PAD_CTRL),
+ MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3 = IOMUX_PAD(0x560, 0x11c, 6, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_STXD4__AUDMUX_AUD4_TXD = IOMUX_PAD(0x564, 0x120, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_STXD4__GPIO2_28 = IOMUX_PAD(0x564, 0x120, 5, 0x8b8, 0, NO_PAD_CTRL),
+ MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0 = IOMUX_PAD(0x564, 0x120, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SRXD4__AUDMUX_AUD4_RXD = IOMUX_PAD(0x568, 0x124, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SRXD4__GPIO2_29 = IOMUX_PAD(0x568, 0x124, 5, 0x8bc, 0, NO_PAD_CTRL),
+ MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1 = IOMUX_PAD(0x568, 0x124, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SCK4__AUDMUX_AUD4_TXC = IOMUX_PAD(0x56c, 0x128, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SCK4__GPIO2_30 = IOMUX_PAD(0x56c, 0x128, 5, 0x8c4, 0, NO_PAD_CTRL),
+ MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2 = IOMUX_PAD(0x56c, 0x128, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS = IOMUX_PAD(0x570, 0x12c, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_STXFS4__GPIO2_31 = IOMUX_PAD(0x570, 0x12c, 5, 0x8c8, 0, NO_PAD_CTRL),
+ MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3 = IOMUX_PAD(0x570, 0x12c, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_STXD5__AUDMUX_AUD5_TXD = IOMUX_PAD(0x574, 0x130, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_STXD5__SPDIF_SPDIF_OUT1 = IOMUX_PAD(0x574, 0x130, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_STXD5__CSPI2_MOSI = IOMUX_PAD(0x574, 0x130, 2, 0x7ec, 0, NO_PAD_CTRL),
+ MX35_PAD_STXD5__GPIO1_0 = IOMUX_PAD(0x574, 0x130, 5, 0x82c, 1, NO_PAD_CTRL),
+ MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4 = IOMUX_PAD(0x574, 0x130, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SRXD5__AUDMUX_AUD5_RXD = IOMUX_PAD(0x578, 0x134, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SRXD5__SPDIF_SPDIF_IN1 = IOMUX_PAD(0x578, 0x134, 1, 0x998, 0, NO_PAD_CTRL),
+ MX35_PAD_SRXD5__CSPI2_MISO = IOMUX_PAD(0x578, 0x134, 2, 0x7e8, 0, NO_PAD_CTRL),
+ MX35_PAD_SRXD5__GPIO1_1 = IOMUX_PAD(0x578, 0x134, 5, 0x838, 1, NO_PAD_CTRL),
+ MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5 = IOMUX_PAD(0x578, 0x134, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SCK5__AUDMUX_AUD5_TXC = IOMUX_PAD(0x57c, 0x138, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK = IOMUX_PAD(0x57c, 0x138, 1, 0x994, 0, NO_PAD_CTRL),
+ MX35_PAD_SCK5__CSPI2_SCLK = IOMUX_PAD(0x57c, 0x138, 2, 0x7e0, 0, NO_PAD_CTRL),
+ MX35_PAD_SCK5__GPIO1_2 = IOMUX_PAD(0x57c, 0x138, 5, 0x848, 0, NO_PAD_CTRL),
+ MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6 = IOMUX_PAD(0x57c, 0x138, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS = IOMUX_PAD(0x580, 0x13c, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_STXFS5__CSPI2_RDY = IOMUX_PAD(0x580, 0x13c, 2, 0x7e4, 0, NO_PAD_CTRL),
+ MX35_PAD_STXFS5__GPIO1_3 = IOMUX_PAD(0x580, 0x13c, 5, 0x84c, 0, NO_PAD_CTRL),
+ MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7 = IOMUX_PAD(0x580, 0x13c, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SCKR__ESAI_SCKR = IOMUX_PAD(0x584, 0x140, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SCKR__GPIO1_4 = IOMUX_PAD(0x584, 0x140, 5, 0x850, 1, NO_PAD_CTRL),
+ MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10 = IOMUX_PAD(0x584, 0x140, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_FSR__ESAI_FSR = IOMUX_PAD(0x588, 0x144, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FSR__GPIO1_5 = IOMUX_PAD(0x588, 0x144, 5, 0x854, 1, NO_PAD_CTRL),
+ MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11 = IOMUX_PAD(0x588, 0x144, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_HCKR__ESAI_HCKR = IOMUX_PAD(0x58c, 0x148, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_HCKR__AUDMUX_AUD5_RXFS = IOMUX_PAD(0x58c, 0x148, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_HCKR__CSPI2_SS0 = IOMUX_PAD(0x58c, 0x148, 2, 0x7f0, 0, NO_PAD_CTRL),
+ MX35_PAD_HCKR__IPU_FLASH_STROBE = IOMUX_PAD(0x58c, 0x148, 3, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_HCKR__GPIO1_6 = IOMUX_PAD(0x58c, 0x148, 5, 0x858, 1, NO_PAD_CTRL),
+ MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12 = IOMUX_PAD(0x58c, 0x148, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SCKT__ESAI_SCKT = IOMUX_PAD(0x590, 0x14c, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SCKT__GPIO1_7 = IOMUX_PAD(0x590, 0x14c, 5, 0x85c, 1, NO_PAD_CTRL),
+ MX35_PAD_SCKT__IPU_CSI_D_0 = IOMUX_PAD(0x590, 0x14c, 6, 0x930, 0, NO_PAD_CTRL),
+ MX35_PAD_SCKT__KPP_ROW_2 = IOMUX_PAD(0x590, 0x14c, 7, 0x978, 1, NO_PAD_CTRL),
+
+ MX35_PAD_FST__ESAI_FST = IOMUX_PAD(0x594, 0x150, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FST__GPIO1_8 = IOMUX_PAD(0x594, 0x150, 5, 0x860, 1, NO_PAD_CTRL),
+ MX35_PAD_FST__IPU_CSI_D_1 = IOMUX_PAD(0x594, 0x150, 6, 0x934, 0, NO_PAD_CTRL),
+ MX35_PAD_FST__KPP_ROW_3 = IOMUX_PAD(0x594, 0x150, 7, 0x97c, 1, NO_PAD_CTRL),
+
+ MX35_PAD_HCKT__ESAI_HCKT = IOMUX_PAD(0x598, 0x154, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_HCKT__AUDMUX_AUD5_RXC = IOMUX_PAD(0x598, 0x154, 1, 0x7a8, 0, NO_PAD_CTRL),
+ MX35_PAD_HCKT__GPIO1_9 = IOMUX_PAD(0x598, 0x154, 5, 0x864, 0, NO_PAD_CTRL),
+ MX35_PAD_HCKT__IPU_CSI_D_2 = IOMUX_PAD(0x598, 0x154, 6, 0x938, 0, NO_PAD_CTRL),
+ MX35_PAD_HCKT__KPP_COL_3 = IOMUX_PAD(0x598, 0x154, 7, 0x95c, 1, NO_PAD_CTRL),
+
+ MX35_PAD_TX5_RX0__ESAI_TX5_RX0 = IOMUX_PAD(0x59c, 0x158, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC = IOMUX_PAD(0x59c, 0x158, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_TX5_RX0__CSPI2_SS2 = IOMUX_PAD(0x59c, 0x158, 2, 0x7f8, 1, NO_PAD_CTRL),
+ MX35_PAD_TX5_RX0__CAN2_TXCAN = IOMUX_PAD(0x59c, 0x158, 3, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_TX5_RX0__UART2_DTR = IOMUX_PAD(0x59c, 0x158, 4, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_TX5_RX0__GPIO1_10 = IOMUX_PAD(0x59c, 0x158, 5, 0x830, 0, NO_PAD_CTRL),
+ MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0 = IOMUX_PAD(0x59c, 0x158, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_TX4_RX1__ESAI_TX4_RX1 = IOMUX_PAD(0x5a0, 0x15c, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS = IOMUX_PAD(0x5a0, 0x15c, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_TX4_RX1__CSPI2_SS3 = IOMUX_PAD(0x5a0, 0x15c, 2, 0x7fc, 0, NO_PAD_CTRL),
+ MX35_PAD_TX4_RX1__CAN2_RXCAN = IOMUX_PAD(0x5a0, 0x15c, 3, 0x7cc, 0, NO_PAD_CTRL),
+ MX35_PAD_TX4_RX1__UART2_DSR = IOMUX_PAD(0x5a0, 0x15c, 4, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_TX4_RX1__GPIO1_11 = IOMUX_PAD(0x5a0, 0x15c, 5, 0x834, 0, NO_PAD_CTRL),
+ MX35_PAD_TX4_RX1__IPU_CSI_D_3 = IOMUX_PAD(0x5a0, 0x15c, 6, 0x93c, 0, NO_PAD_CTRL),
+ MX35_PAD_TX4_RX1__KPP_ROW_0 = IOMUX_PAD(0x5a0, 0x15c, 7, 0x970, 1, NO_PAD_CTRL),
+
+ MX35_PAD_TX3_RX2__ESAI_TX3_RX2 = IOMUX_PAD(0x5a4, 0x160, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_TX3_RX2__I2C3_SCL = IOMUX_PAD(0x5a4, 0x160, 1, 0x91c, 0, NO_PAD_CTRL),
+ MX35_PAD_TX3_RX2__EMI_NANDF_CE1 = IOMUX_PAD(0x5a4, 0x160, 3, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_TX3_RX2__GPIO1_12 = IOMUX_PAD(0x5a4, 0x160, 5, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_TX3_RX2__IPU_CSI_D_4 = IOMUX_PAD(0x5a4, 0x160, 6, 0x940, 0, NO_PAD_CTRL),
+ MX35_PAD_TX3_RX2__KPP_ROW_1 = IOMUX_PAD(0x5a4, 0x160, 7, 0x974, 1, NO_PAD_CTRL),
+
+ MX35_PAD_TX2_RX3__ESAI_TX2_RX3 = IOMUX_PAD(0x5a8, 0x164, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_TX2_RX3__I2C3_SDA = IOMUX_PAD(0x5a8, 0x164, 1, 0x920, 0, NO_PAD_CTRL),
+ MX35_PAD_TX2_RX3__EMI_NANDF_CE2 = IOMUX_PAD(0x5a8, 0x164, 3, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_TX2_RX3__GPIO1_13 = IOMUX_PAD(0x5a8, 0x164, 5, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_TX2_RX3__IPU_CSI_D_5 = IOMUX_PAD(0x5a8, 0x164, 6, 0x944, 0, NO_PAD_CTRL),
+ MX35_PAD_TX2_RX3__KPP_COL_0 = IOMUX_PAD(0x5a8, 0x164, 7, 0x950, 1, NO_PAD_CTRL),
+
+ MX35_PAD_TX1__ESAI_TX1 = IOMUX_PAD(0x5ac, 0x168, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_TX1__CCM_PMIC_RDY = IOMUX_PAD(0x5ac, 0x168, 1, 0x7d4, 1, NO_PAD_CTRL),
+ MX35_PAD_TX1__CSPI1_SS2 = IOMUX_PAD(0x5ac, 0x168, 2, 0x7d8, 2, NO_PAD_CTRL),
+ MX35_PAD_TX1__EMI_NANDF_CE3 = IOMUX_PAD(0x5ac, 0x168, 3, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_TX1__UART2_RI = IOMUX_PAD(0x5ac, 0x168, 4, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_TX1__GPIO1_14 = IOMUX_PAD(0x5ac, 0x168, 5, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_TX1__IPU_CSI_D_6 = IOMUX_PAD(0x5ac, 0x168, 6, 0x948, 0, NO_PAD_CTRL),
+ MX35_PAD_TX1__KPP_COL_1 = IOMUX_PAD(0x5ac, 0x168, 7, 0x954, 1, NO_PAD_CTRL),
+
+ MX35_PAD_TX0__ESAI_TX0 = IOMUX_PAD(0x5b0, 0x16c, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK = IOMUX_PAD(0x5b0, 0x16c, 1, 0x994, 1, NO_PAD_CTRL),
+ MX35_PAD_TX0__CSPI1_SS3 = IOMUX_PAD(0x5b0, 0x16c, 2, 0x7dc, 0, NO_PAD_CTRL),
+ MX35_PAD_TX0__EMI_DTACK_B = IOMUX_PAD(0x5b0, 0x16c, 3, 0x800, 1, NO_PAD_CTRL),
+ MX35_PAD_TX0__UART2_DCD = IOMUX_PAD(0x5b0, 0x16c, 4, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_TX0__GPIO1_15 = IOMUX_PAD(0x5b0, 0x16c, 5, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_TX0__IPU_CSI_D_7 = IOMUX_PAD(0x5b0, 0x16c, 6, 0x94c, 0, NO_PAD_CTRL),
+ MX35_PAD_TX0__KPP_COL_2 = IOMUX_PAD(0x5b0, 0x16c, 7, 0x958, 1, NO_PAD_CTRL),
+
+ MX35_PAD_CSPI1_MOSI__CSPI1_MOSI = IOMUX_PAD(0x5b4, 0x170, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CSPI1_MOSI__GPIO1_16 = IOMUX_PAD(0x5b4, 0x170, 5, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2 = IOMUX_PAD(0x5b4, 0x170, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_CSPI1_MISO__CSPI1_MISO = IOMUX_PAD(0x5b8, 0x174, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CSPI1_MISO__GPIO1_17 = IOMUX_PAD(0x5b8, 0x174, 5, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3 = IOMUX_PAD(0x5b8, 0x174, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_CSPI1_SS0__CSPI1_SS0 = IOMUX_PAD(0x5bc, 0x178, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CSPI1_SS0__OWIRE_LINE = IOMUX_PAD(0x5bc, 0x178, 1, 0x990, 1, NO_PAD_CTRL),
+ MX35_PAD_CSPI1_SS0__CSPI2_SS3 = IOMUX_PAD(0x5bc, 0x178, 2, 0x7fc, 1, NO_PAD_CTRL),
+ MX35_PAD_CSPI1_SS0__GPIO1_18 = IOMUX_PAD(0x5bc, 0x178, 5, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4 = IOMUX_PAD(0x5bc, 0x178, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_CSPI1_SS1__CSPI1_SS1 = IOMUX_PAD(0x5c0, 0x17c, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CSPI1_SS1__PWM_PWMO = IOMUX_PAD(0x5c0, 0x17c, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CSPI1_SS1__CCM_CLK32K = IOMUX_PAD(0x5c0, 0x17c, 2, 0x7d0, 1, NO_PAD_CTRL),
+ MX35_PAD_CSPI1_SS1__GPIO1_19 = IOMUX_PAD(0x5c0, 0x17c, 5, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CSPI1_SS1__IPU_DIAGB_29 = IOMUX_PAD(0x5c0, 0x17c, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5 = IOMUX_PAD(0x5c0, 0x17c, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_CSPI1_SCLK__CSPI1_SCLK = IOMUX_PAD(0x5c4, 0x180, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CSPI1_SCLK__GPIO3_4 = IOMUX_PAD(0x5c4, 0x180, 5, 0x904, 0, NO_PAD_CTRL),
+ MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30 = IOMUX_PAD(0x5c4, 0x180, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1 = IOMUX_PAD(0x5c4, 0x180, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY = IOMUX_PAD(0x5c8, 0x184, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CSPI1_SPI_RDY__GPIO3_5 = IOMUX_PAD(0x5c8, 0x184, 5, 0x908, 0, NO_PAD_CTRL),
+ MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31 = IOMUX_PAD(0x5c8, 0x184, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2 = IOMUX_PAD(0x5c8, 0x184, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_RXD1__UART1_RXD_MUX = IOMUX_PAD(0x5cc, 0x188, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_RXD1__CSPI2_MOSI = IOMUX_PAD(0x5cc, 0x188, 1, 0x7ec, 1, NO_PAD_CTRL),
+ MX35_PAD_RXD1__KPP_COL_4 = IOMUX_PAD(0x5cc, 0x188, 4, 0x960, 0, NO_PAD_CTRL),
+ MX35_PAD_RXD1__GPIO3_6 = IOMUX_PAD(0x5cc, 0x188, 5, 0x90c, 0, NO_PAD_CTRL),
+ MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16 = IOMUX_PAD(0x5cc, 0x188, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_TXD1__UART1_TXD_MUX = IOMUX_PAD(0x5d0, 0x18c, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_TXD1__CSPI2_MISO = IOMUX_PAD(0x5d0, 0x18c, 1, 0x7e8, 1, NO_PAD_CTRL),
+ MX35_PAD_TXD1__KPP_COL_5 = IOMUX_PAD(0x5d0, 0x18c, 4, 0x964, 0, NO_PAD_CTRL),
+ MX35_PAD_TXD1__GPIO3_7 = IOMUX_PAD(0x5d0, 0x18c, 5, 0x910, 0, NO_PAD_CTRL),
+ MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17 = IOMUX_PAD(0x5d0, 0x18c, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_RTS1__UART1_RTS = IOMUX_PAD(0x5d4, 0x190, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_RTS1__CSPI2_SCLK = IOMUX_PAD(0x5d4, 0x190, 1, 0x7e0, 1, NO_PAD_CTRL),
+ MX35_PAD_RTS1__I2C3_SCL = IOMUX_PAD(0x5d4, 0x190, 2, 0x91c, 1, NO_PAD_CTRL),
+ MX35_PAD_RTS1__IPU_CSI_D_0 = IOMUX_PAD(0x5d4, 0x190, 3, 0x930, 1, NO_PAD_CTRL),
+ MX35_PAD_RTS1__KPP_COL_6 = IOMUX_PAD(0x5d4, 0x190, 4, 0x968, 0, NO_PAD_CTRL),
+ MX35_PAD_RTS1__GPIO3_8 = IOMUX_PAD(0x5d4, 0x190, 5, 0x914, 0, NO_PAD_CTRL),
+ MX35_PAD_RTS1__EMI_NANDF_CE1 = IOMUX_PAD(0x5d4, 0x190, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18 = IOMUX_PAD(0x5d4, 0x190, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_CTS1__UART1_CTS = IOMUX_PAD(0x5d8, 0x194, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CTS1__CSPI2_RDY = IOMUX_PAD(0x5d8, 0x194, 1, 0x7e4, 1, NO_PAD_CTRL),
+ MX35_PAD_CTS1__I2C3_SDA = IOMUX_PAD(0x5d8, 0x194, 2, 0x920, 1, NO_PAD_CTRL),
+ MX35_PAD_CTS1__IPU_CSI_D_1 = IOMUX_PAD(0x5d8, 0x194, 3, 0x934, 1, NO_PAD_CTRL),
+ MX35_PAD_CTS1__KPP_COL_7 = IOMUX_PAD(0x5d8, 0x194, 4, 0x96c, 0, NO_PAD_CTRL),
+ MX35_PAD_CTS1__GPIO3_9 = IOMUX_PAD(0x5d8, 0x194, 5, 0x918, 0, NO_PAD_CTRL),
+ MX35_PAD_CTS1__EMI_NANDF_CE2 = IOMUX_PAD(0x5d8, 0x194, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19 = IOMUX_PAD(0x5d8, 0x194, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_RXD2__UART2_RXD_MUX = IOMUX_PAD(0x5dc, 0x198, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_RXD2__KPP_ROW_4 = IOMUX_PAD(0x5dc, 0x198, 4, 0x980, 0, NO_PAD_CTRL),
+ MX35_PAD_RXD2__GPIO3_10 = IOMUX_PAD(0x5dc, 0x198, 5, 0x8ec, 0, NO_PAD_CTRL),
+
+ MX35_PAD_TXD2__UART2_TXD_MUX = IOMUX_PAD(0x5e0, 0x19c, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK = IOMUX_PAD(0x5e0, 0x19c, 1, 0x994, 2, NO_PAD_CTRL),
+ MX35_PAD_TXD2__KPP_ROW_5 = IOMUX_PAD(0x5e0, 0x19c, 4, 0x984, 0, NO_PAD_CTRL),
+ MX35_PAD_TXD2__GPIO3_11 = IOMUX_PAD(0x5e0, 0x19c, 5, 0x8f0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_RTS2__UART2_RTS = IOMUX_PAD(0x5e4, 0x1a0, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_RTS2__SPDIF_SPDIF_IN1 = IOMUX_PAD(0x5e4, 0x1a0, 1, 0x998, 1, NO_PAD_CTRL),
+ MX35_PAD_RTS2__CAN2_RXCAN = IOMUX_PAD(0x5e4, 0x1a0, 2, 0x7cc, 1, NO_PAD_CTRL),
+ MX35_PAD_RTS2__IPU_CSI_D_2 = IOMUX_PAD(0x5e4, 0x1a0, 3, 0x938, 1, NO_PAD_CTRL),
+ MX35_PAD_RTS2__KPP_ROW_6 = IOMUX_PAD(0x5e4, 0x1a0, 4, 0x988, 0, NO_PAD_CTRL),
+ MX35_PAD_RTS2__GPIO3_12 = IOMUX_PAD(0x5e4, 0x1a0, 5, 0x8f4, 0, NO_PAD_CTRL),
+ MX35_PAD_RTS2__AUDMUX_AUD5_RXC = IOMUX_PAD(0x5e4, 0x1a0, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_RTS2__UART3_RXD_MUX = IOMUX_PAD(0x5e4, 0x1a0, 7, 0x9a0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_CTS2__UART2_CTS = IOMUX_PAD(0x5e8, 0x1a4, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CTS2__SPDIF_SPDIF_OUT1 = IOMUX_PAD(0x5e8, 0x1a4, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CTS2__CAN2_TXCAN = IOMUX_PAD(0x5e8, 0x1a4, 2, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CTS2__IPU_CSI_D_3 = IOMUX_PAD(0x5e8, 0x1a4, 3, 0x93c, 1, NO_PAD_CTRL),
+ MX35_PAD_CTS2__KPP_ROW_7 = IOMUX_PAD(0x5e8, 0x1a4, 4, 0x98c, 0, NO_PAD_CTRL),
+ MX35_PAD_CTS2__GPIO3_13 = IOMUX_PAD(0x5e8, 0x1a4, 5, 0x8f8, 0, NO_PAD_CTRL),
+ MX35_PAD_CTS2__AUDMUX_AUD5_RXFS = IOMUX_PAD(0x5e8, 0x1a4, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CTS2__UART3_TXD_MUX = IOMUX_PAD(0x5e8, 0x1a4, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_RTCK__ARM11P_TOP_RTCK = IOMUX_PAD(0x5ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_TCK__SJC_TCK = IOMUX_PAD(0x5f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_TMS__SJC_TMS = IOMUX_PAD(0x5f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_TDI__SJC_TDI = IOMUX_PAD(0x5f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_TDO__SJC_TDO = IOMUX_PAD(0x5fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_TRSTB__SJC_TRSTB = IOMUX_PAD(0x600, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_DE_B__SJC_DE_B = IOMUX_PAD(0x604, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SJC_MOD__SJC_MOD = IOMUX_PAD(0x608, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR = IOMUX_PAD(0x60c, 0x1a8, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR = IOMUX_PAD(0x60c, 0x1a8, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_USBOTG_PWR__GPIO3_14 = IOMUX_PAD(0x60c, 0x1a8, 5, 0x8fc, 0, NO_PAD_CTRL),
+
+ MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC = IOMUX_PAD(0x610, 0x1ac, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC = IOMUX_PAD(0x610, 0x1ac, 1, 0x9f4, 1, NO_PAD_CTRL),
+ MX35_PAD_USBOTG_OC__GPIO3_15 = IOMUX_PAD(0x610, 0x1ac, 5, 0x900, 0, NO_PAD_CTRL),
+
+ MX35_PAD_LD0__IPU_DISPB_DAT_0 = IOMUX_PAD(0x614, 0x1b0, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD0__GPIO2_0 = IOMUX_PAD(0x614, 0x1b0, 5, 0x868, 1, NO_PAD_CTRL),
+ MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0 = IOMUX_PAD(0x614, 0x1b0, 6, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_LD1__IPU_DISPB_DAT_1 = IOMUX_PAD(0x618, 0x1b4, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD1__GPIO2_1 = IOMUX_PAD(0x618, 0x1b4, 5, 0x894, 0, NO_PAD_CTRL),
+ MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1 = IOMUX_PAD(0x618, 0x1b4, 6, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_LD2__IPU_DISPB_DAT_2 = IOMUX_PAD(0x61c, 0x1b8, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD2__GPIO2_2 = IOMUX_PAD(0x61c, 0x1b8, 5, 0x8c0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2 = IOMUX_PAD(0x61c, 0x1b8, 6, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_LD3__IPU_DISPB_DAT_3 = IOMUX_PAD(0x620, 0x1bc, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD3__GPIO2_3 = IOMUX_PAD(0x620, 0x1bc, 5, 0x8cc, 0, NO_PAD_CTRL),
+ MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3 = IOMUX_PAD(0x620, 0x1bc, 6, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_LD4__IPU_DISPB_DAT_4 = IOMUX_PAD(0x624, 0x1c0, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD4__GPIO2_4 = IOMUX_PAD(0x624, 0x1c0, 5, 0x8d0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4 = IOMUX_PAD(0x624, 0x1c0, 6, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_LD5__IPU_DISPB_DAT_5 = IOMUX_PAD(0x628, 0x1c4, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD5__GPIO2_5 = IOMUX_PAD(0x628, 0x1c4, 5, 0x8d4, 0, NO_PAD_CTRL),
+ MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5 = IOMUX_PAD(0x628, 0x1c4, 6, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_LD6__IPU_DISPB_DAT_6 = IOMUX_PAD(0x62c, 0x1c8, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD6__GPIO2_6 = IOMUX_PAD(0x62c, 0x1c8, 5, 0x8d8, 0, NO_PAD_CTRL),
+ MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6 = IOMUX_PAD(0x62c, 0x1c8, 6, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_LD7__IPU_DISPB_DAT_7 = IOMUX_PAD(0x630, 0x1cc, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD7__GPIO2_7 = IOMUX_PAD(0x630, 0x1cc, 5, 0x8dc, 0, NO_PAD_CTRL),
+ MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7 = IOMUX_PAD(0x630, 0x1cc, 6, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_LD8__IPU_DISPB_DAT_8 = IOMUX_PAD(0x634, 0x1d0, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD8__GPIO2_8 = IOMUX_PAD(0x634, 0x1d0, 5, 0x8e0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8 = IOMUX_PAD(0x634, 0x1d0, 6, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_LD9__IPU_DISPB_DAT_9 = IOMUX_PAD(0x638, 0x1d4, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD9__GPIO2_9 = IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4, 0, NO_PAD_CTRL),
+ MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9 = IOMUX_PAD(0x638, 0x1d4, 6, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_LD10__IPU_DISPB_DAT_10 = IOMUX_PAD(0x63c, 0x1d8, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD10__GPIO2_10 = IOMUX_PAD(0x63c, 0x1d8, 5, 0x86c, 0, NO_PAD_CTRL),
+ MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10 = IOMUX_PAD(0x63c, 0x1d8, 6, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_LD11__IPU_DISPB_DAT_11 = IOMUX_PAD(0x640, 0x1dc, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD11__GPIO2_11 = IOMUX_PAD(0x640, 0x1dc, 5, 0x870, 0, NO_PAD_CTRL),
+ MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11 = IOMUX_PAD(0x640, 0x1dc, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD11__ARM11P_TOP_TRACE_4 = IOMUX_PAD(0x640, 0x1dc, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_LD12__IPU_DISPB_DAT_12 = IOMUX_PAD(0x644, 0x1e0, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD12__GPIO2_12 = IOMUX_PAD(0x644, 0x1e0, 5, 0x874, 0, NO_PAD_CTRL),
+ MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12 = IOMUX_PAD(0x644, 0x1e0, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD12__ARM11P_TOP_TRACE_5 = IOMUX_PAD(0x644, 0x1e0, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_LD13__IPU_DISPB_DAT_13 = IOMUX_PAD(0x648, 0x1e4, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD13__GPIO2_13 = IOMUX_PAD(0x648, 0x1e4, 5, 0x878, 0, NO_PAD_CTRL),
+ MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13 = IOMUX_PAD(0x648, 0x1e4, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD13__ARM11P_TOP_TRACE_6 = IOMUX_PAD(0x648, 0x1e4, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_LD14__IPU_DISPB_DAT_14 = IOMUX_PAD(0x64c, 0x1e8, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD14__GPIO2_14 = IOMUX_PAD(0x64c, 0x1e8, 5, 0x87c, 0, NO_PAD_CTRL),
+ MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0 = IOMUX_PAD(0x64c, 0x1e8, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD14__ARM11P_TOP_TRACE_7 = IOMUX_PAD(0x64c, 0x1e8, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_LD15__IPU_DISPB_DAT_15 = IOMUX_PAD(0x650, 0x1ec, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD15__GPIO2_15 = IOMUX_PAD(0x650, 0x1ec, 5, 0x880, 0, NO_PAD_CTRL),
+ MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1 = IOMUX_PAD(0x650, 0x1ec, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD15__ARM11P_TOP_TRACE_8 = IOMUX_PAD(0x650, 0x1ec, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_LD16__IPU_DISPB_DAT_16 = IOMUX_PAD(0x654, 0x1f0, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD16__IPU_DISPB_D12_VSYNC = IOMUX_PAD(0x654, 0x1f0, 2, 0x928, 0, NO_PAD_CTRL),
+ MX35_PAD_LD16__GPIO2_16 = IOMUX_PAD(0x654, 0x1f0, 5, 0x884, 0, NO_PAD_CTRL),
+ MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2 = IOMUX_PAD(0x654, 0x1f0, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD16__ARM11P_TOP_TRACE_9 = IOMUX_PAD(0x654, 0x1f0, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_LD17__IPU_DISPB_DAT_17 = IOMUX_PAD(0x658, 0x1f4, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD17__IPU_DISPB_CS2 = IOMUX_PAD(0x658, 0x1f4, 2, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD17__GPIO2_17 = IOMUX_PAD(0x658, 0x1f4, 5, 0x888, 0, NO_PAD_CTRL),
+ MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3 = IOMUX_PAD(0x658, 0x1f4, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD17__ARM11P_TOP_TRACE_10 = IOMUX_PAD(0x658, 0x1f4, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_LD18__IPU_DISPB_DAT_18 = IOMUX_PAD(0x65c, 0x1f8, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD18__IPU_DISPB_D0_VSYNC = IOMUX_PAD(0x65c, 0x1f8, 1, 0x924, 1, NO_PAD_CTRL),
+ MX35_PAD_LD18__IPU_DISPB_D12_VSYNC = IOMUX_PAD(0x65c, 0x1f8, 2, 0x928, 1, NO_PAD_CTRL),
+ MX35_PAD_LD18__ESDHC3_CMD = IOMUX_PAD(0x65c, 0x1f8, 3, 0x818, 0, NO_PAD_CTRL),
+ MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3 = IOMUX_PAD(0x65c, 0x1f8, 4, 0x9b0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD18__GPIO3_24 = IOMUX_PAD(0x65c, 0x1f8, 5, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4 = IOMUX_PAD(0x65c, 0x1f8, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD18__ARM11P_TOP_TRACE_11 = IOMUX_PAD(0x65c, 0x1f8, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_LD19__IPU_DISPB_DAT_19 = IOMUX_PAD(0x660, 0x1fc, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD19__IPU_DISPB_BCLK = IOMUX_PAD(0x660, 0x1fc, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD19__IPU_DISPB_CS1 = IOMUX_PAD(0x660, 0x1fc, 2, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD19__ESDHC3_CLK = IOMUX_PAD(0x660, 0x1fc, 3, 0x814, 0, NO_PAD_CTRL),
+ MX35_PAD_LD19__USB_TOP_USBOTG_DIR = IOMUX_PAD(0x660, 0x1fc, 4, 0x9c4, 0, NO_PAD_CTRL),
+ MX35_PAD_LD19__GPIO3_25 = IOMUX_PAD(0x660, 0x1fc, 5, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5 = IOMUX_PAD(0x660, 0x1fc, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD19__ARM11P_TOP_TRACE_12 = IOMUX_PAD(0x660, 0x1fc, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_LD20__IPU_DISPB_DAT_20 = IOMUX_PAD(0x664, 0x200, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD20__IPU_DISPB_CS0 = IOMUX_PAD(0x664, 0x200, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD20__IPU_DISPB_SD_CLK = IOMUX_PAD(0x664, 0x200, 2, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD20__ESDHC3_DAT0 = IOMUX_PAD(0x664, 0x200, 3, 0x81c, 0, NO_PAD_CTRL),
+ MX35_PAD_LD20__GPIO3_26 = IOMUX_PAD(0x664, 0x200, 5, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3 = IOMUX_PAD(0x664, 0x200, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD20__ARM11P_TOP_TRACE_13 = IOMUX_PAD(0x664, 0x200, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_LD21__IPU_DISPB_DAT_21 = IOMUX_PAD(0x668, 0x204, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD21__IPU_DISPB_PAR_RS = IOMUX_PAD(0x668, 0x204, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD21__IPU_DISPB_SER_RS = IOMUX_PAD(0x668, 0x204, 2, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD21__ESDHC3_DAT1 = IOMUX_PAD(0x668, 0x204, 3, 0x820, 0, NO_PAD_CTRL),
+ MX35_PAD_LD21__USB_TOP_USBOTG_STP = IOMUX_PAD(0x668, 0x204, 4, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD21__GPIO3_27 = IOMUX_PAD(0x668, 0x204, 5, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL = IOMUX_PAD(0x668, 0x204, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD21__ARM11P_TOP_TRACE_14 = IOMUX_PAD(0x668, 0x204, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_LD22__IPU_DISPB_DAT_22 = IOMUX_PAD(0x66c, 0x208, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD22__IPU_DISPB_WR = IOMUX_PAD(0x66c, 0x208, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD22__IPU_DISPB_SD_D_I = IOMUX_PAD(0x66c, 0x208, 2, 0x92c, 0, NO_PAD_CTRL),
+ MX35_PAD_LD22__ESDHC3_DAT2 = IOMUX_PAD(0x66c, 0x208, 3, 0x824, 0, NO_PAD_CTRL),
+ MX35_PAD_LD22__USB_TOP_USBOTG_NXT = IOMUX_PAD(0x66c, 0x208, 4, 0x9c8, 0, NO_PAD_CTRL),
+ MX35_PAD_LD22__GPIO3_28 = IOMUX_PAD(0x66c, 0x208, 5, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR = IOMUX_PAD(0x66c, 0x208, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD22__ARM11P_TOP_TRCTL = IOMUX_PAD(0x66c, 0x208, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_LD23__IPU_DISPB_DAT_23 = IOMUX_PAD(0x670, 0x20c, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD23__IPU_DISPB_RD = IOMUX_PAD(0x670, 0x20c, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD23__IPU_DISPB_SD_D_IO = IOMUX_PAD(0x670, 0x20c, 2, 0x92c, 1, NO_PAD_CTRL),
+ MX35_PAD_LD23__ESDHC3_DAT3 = IOMUX_PAD(0x670, 0x20c, 3, 0x828, 0, NO_PAD_CTRL),
+ MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7 = IOMUX_PAD(0x670, 0x20c, 4, 0x9c0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD23__GPIO3_29 = IOMUX_PAD(0x670, 0x20c, 5, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS = IOMUX_PAD(0x670, 0x20c, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_LD23__ARM11P_TOP_TRCLK = IOMUX_PAD(0x670, 0x20c, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC = IOMUX_PAD(0x674, 0x210, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO = IOMUX_PAD(0x674, 0x210, 2, 0x92c, 2, NO_PAD_CTRL),
+ MX35_PAD_D3_HSYNC__GPIO3_30 = IOMUX_PAD(0x674, 0x210, 5, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE = IOMUX_PAD(0x674, 0x210, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15 = IOMUX_PAD(0x674, 0x210, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK = IOMUX_PAD(0x678, 0x214, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK = IOMUX_PAD(0x678, 0x214, 2, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_D3_FPSHIFT__GPIO3_31 = IOMUX_PAD(0x678, 0x214, 5, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0 = IOMUX_PAD(0x678, 0x214, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16 = IOMUX_PAD(0x678, 0x214, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY = IOMUX_PAD(0x67c, 0x218, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O = IOMUX_PAD(0x67c, 0x218, 2, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_D3_DRDY__GPIO1_0 = IOMUX_PAD(0x67c, 0x218, 5, 0x82c, 2, NO_PAD_CTRL),
+ MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1 = IOMUX_PAD(0x67c, 0x218, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17 = IOMUX_PAD(0x67c, 0x218, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_CONTRAST__IPU_DISPB_CONTR = IOMUX_PAD(0x680, 0x21c, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CONTRAST__GPIO1_1 = IOMUX_PAD(0x680, 0x21c, 5, 0x838, 2, NO_PAD_CTRL),
+ MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2 = IOMUX_PAD(0x680, 0x21c, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18 = IOMUX_PAD(0x680, 0x21c, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC = IOMUX_PAD(0x684, 0x220, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_D3_VSYNC__IPU_DISPB_CS1 = IOMUX_PAD(0x684, 0x220, 2, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_D3_VSYNC__GPIO1_2 = IOMUX_PAD(0x684, 0x220, 5, 0x848, 1, NO_PAD_CTRL),
+ MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD = IOMUX_PAD(0x684, 0x220, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19 = IOMUX_PAD(0x684, 0x220, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_D3_REV__IPU_DISPB_D3_REV = IOMUX_PAD(0x688, 0x224, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_D3_REV__IPU_DISPB_SER_RS = IOMUX_PAD(0x688, 0x224, 2, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_D3_REV__GPIO1_3 = IOMUX_PAD(0x688, 0x224, 5, 0x84c, 1, NO_PAD_CTRL),
+ MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB = IOMUX_PAD(0x688, 0x224, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20 = IOMUX_PAD(0x688, 0x224, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS = IOMUX_PAD(0x68c, 0x228, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_D3_CLS__IPU_DISPB_CS2 = IOMUX_PAD(0x68c, 0x228, 2, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_D3_CLS__GPIO1_4 = IOMUX_PAD(0x68c, 0x228, 5, 0x850, 2, NO_PAD_CTRL),
+ MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0 = IOMUX_PAD(0x68c, 0x228, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21 = IOMUX_PAD(0x68c, 0x228, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL = IOMUX_PAD(0x690, 0x22c, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC = IOMUX_PAD(0x690, 0x22c, 2, 0x928, 2, NO_PAD_CTRL),
+ MX35_PAD_D3_SPL__GPIO1_5 = IOMUX_PAD(0x690, 0x22c, 5, 0x854, 2, NO_PAD_CTRL),
+ MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1 = IOMUX_PAD(0x690, 0x22c, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22 = IOMUX_PAD(0x690, 0x22c, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD1_CMD__ESDHC1_CMD = IOMUX_PAD(0x694, 0x230, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SD1_CMD__MSHC_SCLK = IOMUX_PAD(0x694, 0x230, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC = IOMUX_PAD(0x694, 0x230, 3, 0x924, 2, NO_PAD_CTRL),
+ MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4 = IOMUX_PAD(0x694, 0x230, 4, 0x9b4, 0, NO_PAD_CTRL),
+ MX35_PAD_SD1_CMD__GPIO1_6 = IOMUX_PAD(0x694, 0x230, 5, 0x858, 2, NO_PAD_CTRL),
+ MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL = IOMUX_PAD(0x694, 0x230, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD1_CLK__ESDHC1_CLK = IOMUX_PAD(0x698, 0x234, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SD1_CLK__MSHC_BS = IOMUX_PAD(0x698, 0x234, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SD1_CLK__IPU_DISPB_BCLK = IOMUX_PAD(0x698, 0x234, 3, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5 = IOMUX_PAD(0x698, 0x234, 4, 0x9b8, 0, NO_PAD_CTRL),
+ MX35_PAD_SD1_CLK__GPIO1_7 = IOMUX_PAD(0x698, 0x234, 5, 0x85c, 2, NO_PAD_CTRL),
+ MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK = IOMUX_PAD(0x698, 0x234, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD1_DATA0__ESDHC1_DAT0 = IOMUX_PAD(0x69c, 0x238, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SD1_DATA0__MSHC_DATA_0 = IOMUX_PAD(0x69c, 0x238, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SD1_DATA0__IPU_DISPB_CS0 = IOMUX_PAD(0x69c, 0x238, 3, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6 = IOMUX_PAD(0x69c, 0x238, 4, 0x9bc, 0, NO_PAD_CTRL),
+ MX35_PAD_SD1_DATA0__GPIO1_8 = IOMUX_PAD(0x69c, 0x238, 5, 0x860, 2, NO_PAD_CTRL),
+ MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23 = IOMUX_PAD(0x69c, 0x238, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD1_DATA1__ESDHC1_DAT1 = IOMUX_PAD(0x6a0, 0x23c, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SD1_DATA1__MSHC_DATA_1 = IOMUX_PAD(0x6a0, 0x23c, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS = IOMUX_PAD(0x6a0, 0x23c, 3, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0 = IOMUX_PAD(0x6a0, 0x23c, 4, 0x9a4, 0, NO_PAD_CTRL),
+ MX35_PAD_SD1_DATA1__GPIO1_9 = IOMUX_PAD(0x6a0, 0x23c, 5, 0x864, 1, NO_PAD_CTRL),
+ MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24 = IOMUX_PAD(0x6a0, 0x23c, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD1_DATA2__ESDHC1_DAT2 = IOMUX_PAD(0x6a4, 0x240, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SD1_DATA2__MSHC_DATA_2 = IOMUX_PAD(0x6a4, 0x240, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SD1_DATA2__IPU_DISPB_WR = IOMUX_PAD(0x6a4, 0x240, 3, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1 = IOMUX_PAD(0x6a4, 0x240, 4, 0x9a8, 0, NO_PAD_CTRL),
+ MX35_PAD_SD1_DATA2__GPIO1_10 = IOMUX_PAD(0x6a4, 0x240, 5, 0x830, 1, NO_PAD_CTRL),
+ MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25 = IOMUX_PAD(0x6a4, 0x240, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD1_DATA3__ESDHC1_DAT3 = IOMUX_PAD(0x6a8, 0x244, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SD1_DATA3__MSHC_DATA_3 = IOMUX_PAD(0x6a8, 0x244, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SD1_DATA3__IPU_DISPB_RD = IOMUX_PAD(0x6a8, 0x244, 3, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2 = IOMUX_PAD(0x6a8, 0x244, 4, 0x9ac, 0, NO_PAD_CTRL),
+ MX35_PAD_SD1_DATA3__GPIO1_11 = IOMUX_PAD(0x6a8, 0x244, 5, 0x834, 1, NO_PAD_CTRL),
+ MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26 = IOMUX_PAD(0x6a8, 0x244, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD2_CMD__ESDHC2_CMD = IOMUX_PAD(0x6ac, 0x248, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SD2_CMD__I2C3_SCL = IOMUX_PAD(0x6ac, 0x248, 1, 0x91c, 2, NO_PAD_CTRL),
+ MX35_PAD_SD2_CMD__ESDHC1_DAT4 = IOMUX_PAD(0x6ac, 0x248, 2, 0x804, 0, NO_PAD_CTRL),
+ MX35_PAD_SD2_CMD__IPU_CSI_D_2 = IOMUX_PAD(0x6ac, 0x248, 3, 0x938, 2, NO_PAD_CTRL),
+ MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4 = IOMUX_PAD(0x6ac, 0x248, 4, 0x9dc, 0, NO_PAD_CTRL),
+ MX35_PAD_SD2_CMD__GPIO2_0 = IOMUX_PAD(0x6ac, 0x248, 5, 0x868, 2, NO_PAD_CTRL),
+ MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1 = IOMUX_PAD(0x6ac, 0x248, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC = IOMUX_PAD(0x6ac, 0x248, 7, 0x928, 3, NO_PAD_CTRL),
+
+ MX35_PAD_SD2_CLK__ESDHC2_CLK = IOMUX_PAD(0x6b0, 0x24c, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SD2_CLK__I2C3_SDA = IOMUX_PAD(0x6b0, 0x24c, 1, 0x920, 2, NO_PAD_CTRL),
+ MX35_PAD_SD2_CLK__ESDHC1_DAT5 = IOMUX_PAD(0x6b0, 0x24c, 2, 0x808, 0, NO_PAD_CTRL),
+ MX35_PAD_SD2_CLK__IPU_CSI_D_3 = IOMUX_PAD(0x6b0, 0x24c, 3, 0x93c, 2, NO_PAD_CTRL),
+ MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5 = IOMUX_PAD(0x6b0, 0x24c, 4, 0x9e0, 0, NO_PAD_CTRL),
+ MX35_PAD_SD2_CLK__GPIO2_1 = IOMUX_PAD(0x6b0, 0x24c, 5, 0x894, 1, NO_PAD_CTRL),
+ MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1 = IOMUX_PAD(0x6b0, 0x24c, 6, 0x998, 2, NO_PAD_CTRL),
+ MX35_PAD_SD2_CLK__IPU_DISPB_CS2 = IOMUX_PAD(0x6b0, 0x24c, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_SD2_DATA0__ESDHC2_DAT0 = IOMUX_PAD(0x6b4, 0x250, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SD2_DATA0__UART3_RXD_MUX = IOMUX_PAD(0x6b4, 0x250, 1, 0x9a0, 1, NO_PAD_CTRL),
+ MX35_PAD_SD2_DATA0__ESDHC1_DAT6 = IOMUX_PAD(0x6b4, 0x250, 2, 0x80c, 0, NO_PAD_CTRL),
+ MX35_PAD_SD2_DATA0__IPU_CSI_D_4 = IOMUX_PAD(0x6b4, 0x250, 3, 0x940, 1, NO_PAD_CTRL),
+ MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6 = IOMUX_PAD(0x6b4, 0x250, 4, 0x9e4, 0, NO_PAD_CTRL),
+ MX35_PAD_SD2_DATA0__GPIO2_2 = IOMUX_PAD(0x6b4, 0x250, 5, 0x8c0, 1, NO_PAD_CTRL),
+ MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK = IOMUX_PAD(0x6b4, 0x250, 6, 0x994, 3, NO_PAD_CTRL),
+
+ MX35_PAD_SD2_DATA1__ESDHC2_DAT1 = IOMUX_PAD(0x6b8, 0x254, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SD2_DATA1__UART3_TXD_MUX = IOMUX_PAD(0x6b8, 0x254, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SD2_DATA1__ESDHC1_DAT7 = IOMUX_PAD(0x6b8, 0x254, 2, 0x810, 0, NO_PAD_CTRL),
+ MX35_PAD_SD2_DATA1__IPU_CSI_D_5 = IOMUX_PAD(0x6b8, 0x254, 3, 0x944, 1, NO_PAD_CTRL),
+ MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0 = IOMUX_PAD(0x6b8, 0x254, 4, 0x9cc, 0, NO_PAD_CTRL),
+ MX35_PAD_SD2_DATA1__GPIO2_3 = IOMUX_PAD(0x6b8, 0x254, 5, 0x8cc, 1, NO_PAD_CTRL),
+
+ MX35_PAD_SD2_DATA2__ESDHC2_DAT2 = IOMUX_PAD(0x6bc, 0x258, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SD2_DATA2__UART3_RTS = IOMUX_PAD(0x6bc, 0x258, 1, 0x99c, 0, NO_PAD_CTRL),
+ MX35_PAD_SD2_DATA2__CAN1_RXCAN = IOMUX_PAD(0x6bc, 0x258, 2, 0x7c8, 1, NO_PAD_CTRL),
+ MX35_PAD_SD2_DATA2__IPU_CSI_D_6 = IOMUX_PAD(0x6bc, 0x258, 3, 0x948, 1, NO_PAD_CTRL),
+ MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1 = IOMUX_PAD(0x6bc, 0x258, 4, 0x9d0, 0, NO_PAD_CTRL),
+ MX35_PAD_SD2_DATA2__GPIO2_4 = IOMUX_PAD(0x6bc, 0x258, 5, 0x8d0, 1, NO_PAD_CTRL),
+
+ MX35_PAD_SD2_DATA3__ESDHC2_DAT3 = IOMUX_PAD(0x6c0, 0x25c, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SD2_DATA3__UART3_CTS = IOMUX_PAD(0x6c0, 0x25c, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SD2_DATA3__CAN1_TXCAN = IOMUX_PAD(0x6c0, 0x25c, 2, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_SD2_DATA3__IPU_CSI_D_7 = IOMUX_PAD(0x6c0, 0x25c, 3, 0x94c, 1, NO_PAD_CTRL),
+ MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2 = IOMUX_PAD(0x6c0, 0x25c, 4, 0x9d4, 0, NO_PAD_CTRL),
+ MX35_PAD_SD2_DATA3__GPIO2_5 = IOMUX_PAD(0x6c0, 0x25c, 5, 0x8d4, 1, NO_PAD_CTRL),
+
+ MX35_PAD_ATA_CS0__ATA_CS0 = IOMUX_PAD(0x6c4, 0x260, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_CS0__CSPI1_SS3 = IOMUX_PAD(0x6c4, 0x260, 1, 0x7dc, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_CS0__IPU_DISPB_CS1 = IOMUX_PAD(0x6c4, 0x260, 3, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_CS0__GPIO2_6 = IOMUX_PAD(0x6c4, 0x260, 5, 0x8d8, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_CS0__IPU_DIAGB_0 = IOMUX_PAD(0x6c4, 0x260, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0 = IOMUX_PAD(0x6c4, 0x260, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_ATA_CS1__ATA_CS1 = IOMUX_PAD(0x6c8, 0x264, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_CS1__IPU_DISPB_CS2 = IOMUX_PAD(0x6c8, 0x264, 3, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_CS1__CSPI2_SS0 = IOMUX_PAD(0x6c8, 0x264, 4, 0x7f0, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_CS1__GPIO2_7 = IOMUX_PAD(0x6c8, 0x264, 5, 0x8dc, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_CS1__IPU_DIAGB_1 = IOMUX_PAD(0x6c8, 0x264, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1 = IOMUX_PAD(0x6c8, 0x264, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_ATA_DIOR__ATA_DIOR = IOMUX_PAD(0x6cc, 0x268, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DIOR__ESDHC3_DAT0 = IOMUX_PAD(0x6cc, 0x268, 1, 0x81c, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR = IOMUX_PAD(0x6cc, 0x268, 2, 0x9c4, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DIOR__IPU_DISPB_BE0 = IOMUX_PAD(0x6cc, 0x268, 3, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DIOR__CSPI2_SS1 = IOMUX_PAD(0x6cc, 0x268, 4, 0x7f4, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DIOR__GPIO2_8 = IOMUX_PAD(0x6cc, 0x268, 5, 0x8e0, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DIOR__IPU_DIAGB_2 = IOMUX_PAD(0x6cc, 0x268, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2 = IOMUX_PAD(0x6cc, 0x268, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_ATA_DIOW__ATA_DIOW = IOMUX_PAD(0x6d0, 0x26c, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DIOW__ESDHC3_DAT1 = IOMUX_PAD(0x6d0, 0x26c, 1, 0x820, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP = IOMUX_PAD(0x6d0, 0x26c, 2, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DIOW__IPU_DISPB_BE1 = IOMUX_PAD(0x6d0, 0x26c, 3, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DIOW__CSPI2_MOSI = IOMUX_PAD(0x6d0, 0x26c, 4, 0x7ec, 2, NO_PAD_CTRL),
+ MX35_PAD_ATA_DIOW__GPIO2_9 = IOMUX_PAD(0x6d0, 0x26c, 5, 0x8e4, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DIOW__IPU_DIAGB_3 = IOMUX_PAD(0x6d0, 0x26c, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3 = IOMUX_PAD(0x6d0, 0x26c, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_ATA_DMACK__ATA_DMACK = IOMUX_PAD(0x6d4, 0x270, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DMACK__ESDHC3_DAT2 = IOMUX_PAD(0x6d4, 0x270, 1, 0x824, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT = IOMUX_PAD(0x6d4, 0x270, 2, 0x9c8, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DMACK__CSPI2_MISO = IOMUX_PAD(0x6d4, 0x270, 4, 0x7e8, 2, NO_PAD_CTRL),
+ MX35_PAD_ATA_DMACK__GPIO2_10 = IOMUX_PAD(0x6d4, 0x270, 5, 0x86c, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DMACK__IPU_DIAGB_4 = IOMUX_PAD(0x6d4, 0x270, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0 = IOMUX_PAD(0x6d4, 0x270, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_ATA_RESET_B__ATA_RESET_B = IOMUX_PAD(0x6d8, 0x274, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_RESET_B__ESDHC3_DAT3 = IOMUX_PAD(0x6d8, 0x274, 1, 0x828, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0 = IOMUX_PAD(0x6d8, 0x274, 2, 0x9a4, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O = IOMUX_PAD(0x6d8, 0x274, 3, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_RESET_B__CSPI2_RDY = IOMUX_PAD(0x6d8, 0x274, 4, 0x7e4, 2, NO_PAD_CTRL),
+ MX35_PAD_ATA_RESET_B__GPIO2_11 = IOMUX_PAD(0x6d8, 0x274, 5, 0x870, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_RESET_B__IPU_DIAGB_5 = IOMUX_PAD(0x6d8, 0x274, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1 = IOMUX_PAD(0x6d8, 0x274, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_ATA_IORDY__ATA_IORDY = IOMUX_PAD(0x6dc, 0x278, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_IORDY__ESDHC3_DAT4 = IOMUX_PAD(0x6dc, 0x278, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1 = IOMUX_PAD(0x6dc, 0x278, 2, 0x9a8, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO = IOMUX_PAD(0x6dc, 0x278, 3, 0x92c, 3, NO_PAD_CTRL),
+ MX35_PAD_ATA_IORDY__ESDHC2_DAT4 = IOMUX_PAD(0x6dc, 0x278, 4, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_IORDY__GPIO2_12 = IOMUX_PAD(0x6dc, 0x278, 5, 0x874, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_IORDY__IPU_DIAGB_6 = IOMUX_PAD(0x6dc, 0x278, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2 = IOMUX_PAD(0x6dc, 0x278, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_ATA_DATA0__ATA_DATA_0 = IOMUX_PAD(0x6e0, 0x27c, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA0__ESDHC3_DAT5 = IOMUX_PAD(0x6e0, 0x27c, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2 = IOMUX_PAD(0x6e0, 0x27c, 2, 0x9ac, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC = IOMUX_PAD(0x6e0, 0x27c, 3, 0x928, 4, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA0__ESDHC2_DAT5 = IOMUX_PAD(0x6e0, 0x27c, 4, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA0__GPIO2_13 = IOMUX_PAD(0x6e0, 0x27c, 5, 0x878, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA0__IPU_DIAGB_7 = IOMUX_PAD(0x6e0, 0x27c, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3 = IOMUX_PAD(0x6e0, 0x27c, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_ATA_DATA1__ATA_DATA_1 = IOMUX_PAD(0x6e4, 0x280, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA1__ESDHC3_DAT6 = IOMUX_PAD(0x6e4, 0x280, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3 = IOMUX_PAD(0x6e4, 0x280, 2, 0x9b0, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK = IOMUX_PAD(0x6e4, 0x280, 3, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA1__ESDHC2_DAT6 = IOMUX_PAD(0x6e4, 0x280, 4, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA1__GPIO2_14 = IOMUX_PAD(0x6e4, 0x280, 5, 0x87c, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA1__IPU_DIAGB_8 = IOMUX_PAD(0x6e4, 0x280, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27 = IOMUX_PAD(0x6e4, 0x280, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_ATA_DATA2__ATA_DATA_2 = IOMUX_PAD(0x6e8, 0x284, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA2__ESDHC3_DAT7 = IOMUX_PAD(0x6e8, 0x284, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4 = IOMUX_PAD(0x6e8, 0x284, 2, 0x9b4, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS = IOMUX_PAD(0x6e8, 0x284, 3, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA2__ESDHC2_DAT7 = IOMUX_PAD(0x6e8, 0x284, 4, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA2__GPIO2_15 = IOMUX_PAD(0x6e8, 0x284, 5, 0x880, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA2__IPU_DIAGB_9 = IOMUX_PAD(0x6e8, 0x284, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28 = IOMUX_PAD(0x6e8, 0x284, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_ATA_DATA3__ATA_DATA_3 = IOMUX_PAD(0x6ec, 0x288, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA3__ESDHC3_CLK = IOMUX_PAD(0x6ec, 0x288, 1, 0x814, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5 = IOMUX_PAD(0x6ec, 0x288, 2, 0x9b8, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA3__CSPI2_SCLK = IOMUX_PAD(0x6ec, 0x288, 4, 0x7e0, 2, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA3__GPIO2_16 = IOMUX_PAD(0x6ec, 0x288, 5, 0x884, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA3__IPU_DIAGB_10 = IOMUX_PAD(0x6ec, 0x288, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29 = IOMUX_PAD(0x6ec, 0x288, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_ATA_DATA4__ATA_DATA_4 = IOMUX_PAD(0x6f0, 0x28c, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA4__ESDHC3_CMD = IOMUX_PAD(0x6f0, 0x28c, 1, 0x818, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6 = IOMUX_PAD(0x6f0, 0x28c, 2, 0x9bc, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA4__GPIO2_17 = IOMUX_PAD(0x6f0, 0x28c, 5, 0x888, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA4__IPU_DIAGB_11 = IOMUX_PAD(0x6f0, 0x28c, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30 = IOMUX_PAD(0x6f0, 0x28c, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_ATA_DATA5__ATA_DATA_5 = IOMUX_PAD(0x6f4, 0x290, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7 = IOMUX_PAD(0x6f4, 0x290, 2, 0x9c0, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA5__GPIO2_18 = IOMUX_PAD(0x6f4, 0x290, 5, 0x88c, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA5__IPU_DIAGB_12 = IOMUX_PAD(0x6f4, 0x290, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31 = IOMUX_PAD(0x6f4, 0x290, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_ATA_DATA6__ATA_DATA_6 = IOMUX_PAD(0x6f8, 0x294, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA6__CAN1_TXCAN = IOMUX_PAD(0x6f8, 0x294, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA6__UART1_DTR = IOMUX_PAD(0x6f8, 0x294, 2, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD = IOMUX_PAD(0x6f8, 0x294, 3, 0x7b4, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA6__GPIO2_19 = IOMUX_PAD(0x6f8, 0x294, 5, 0x890, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA6__IPU_DIAGB_13 = IOMUX_PAD(0x6f8, 0x294, 6, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_ATA_DATA7__ATA_DATA_7 = IOMUX_PAD(0x6fc, 0x298, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA7__CAN1_RXCAN = IOMUX_PAD(0x6fc, 0x298, 1, 0x7c8, 2, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA7__UART1_DSR = IOMUX_PAD(0x6fc, 0x298, 2, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD = IOMUX_PAD(0x6fc, 0x298, 3, 0x7b0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA7__GPIO2_20 = IOMUX_PAD(0x6fc, 0x298, 5, 0x898, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA7__IPU_DIAGB_14 = IOMUX_PAD(0x6fc, 0x298, 6, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_ATA_DATA8__ATA_DATA_8 = IOMUX_PAD(0x700, 0x29c, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA8__UART3_RTS = IOMUX_PAD(0x700, 0x29c, 1, 0x99c, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA8__UART1_RI = IOMUX_PAD(0x700, 0x29c, 2, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC = IOMUX_PAD(0x700, 0x29c, 3, 0x7c0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA8__GPIO2_21 = IOMUX_PAD(0x700, 0x29c, 5, 0x89c, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA8__IPU_DIAGB_15 = IOMUX_PAD(0x700, 0x29c, 6, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_ATA_DATA9__ATA_DATA_9 = IOMUX_PAD(0x704, 0x2a0, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA9__UART3_CTS = IOMUX_PAD(0x704, 0x2a0, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA9__UART1_DCD = IOMUX_PAD(0x704, 0x2a0, 2, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS = IOMUX_PAD(0x704, 0x2a0, 3, 0x7c4, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA9__GPIO2_22 = IOMUX_PAD(0x704, 0x2a0, 5, 0x8a0, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA9__IPU_DIAGB_16 = IOMUX_PAD(0x704, 0x2a0, 6, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_ATA_DATA10__ATA_DATA_10 = IOMUX_PAD(0x708, 0x2a4, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA10__UART3_RXD_MUX = IOMUX_PAD(0x708, 0x2a4, 1, 0x9a0, 2, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC = IOMUX_PAD(0x708, 0x2a4, 3, 0x7b8, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA10__GPIO2_23 = IOMUX_PAD(0x708, 0x2a4, 5, 0x8a4, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA10__IPU_DIAGB_17 = IOMUX_PAD(0x708, 0x2a4, 6, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_ATA_DATA11__ATA_DATA_11 = IOMUX_PAD(0x70c, 0x2a8, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA11__UART3_TXD_MUX = IOMUX_PAD(0x70c, 0x2a8, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS = IOMUX_PAD(0x70c, 0x2a8, 3, 0x7bc, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA11__GPIO2_24 = IOMUX_PAD(0x70c, 0x2a8, 5, 0x8a8, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA11__IPU_DIAGB_18 = IOMUX_PAD(0x70c, 0x2a8, 6, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_ATA_DATA12__ATA_DATA_12 = IOMUX_PAD(0x710, 0x2ac, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA12__I2C3_SCL = IOMUX_PAD(0x710, 0x2ac, 1, 0x91c, 3, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA12__GPIO2_25 = IOMUX_PAD(0x710, 0x2ac, 5, 0x8ac, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA12__IPU_DIAGB_19 = IOMUX_PAD(0x710, 0x2ac, 6, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_ATA_DATA13__ATA_DATA_13 = IOMUX_PAD(0x714, 0x2b0, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA13__I2C3_SDA = IOMUX_PAD(0x714, 0x2b0, 1, 0x920, 3, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA13__GPIO2_26 = IOMUX_PAD(0x714, 0x2b0, 5, 0x8b0, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA13__IPU_DIAGB_20 = IOMUX_PAD(0x714, 0x2b0, 6, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_ATA_DATA14__ATA_DATA_14 = IOMUX_PAD(0x718, 0x2b4, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA14__IPU_CSI_D_0 = IOMUX_PAD(0x718, 0x2b4, 1, 0x930, 2, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA14__KPP_ROW_0 = IOMUX_PAD(0x718, 0x2b4, 3, 0x970, 2, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA14__GPIO2_27 = IOMUX_PAD(0x718, 0x2b4, 5, 0x8b4, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA14__IPU_DIAGB_21 = IOMUX_PAD(0x718, 0x2b4, 6, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_ATA_DATA15__ATA_DATA_15 = IOMUX_PAD(0x71c, 0x2b8, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA15__IPU_CSI_D_1 = IOMUX_PAD(0x71c, 0x2b8, 1, 0x934, 2, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA15__KPP_ROW_1 = IOMUX_PAD(0x71c, 0x2b8, 3, 0x974, 2, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA15__GPIO2_28 = IOMUX_PAD(0x71c, 0x2b8, 5, 0x8b8, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DATA15__IPU_DIAGB_22 = IOMUX_PAD(0x71c, 0x2b8, 6, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_ATA_INTRQ__ATA_INTRQ = IOMUX_PAD(0x720, 0x2bc, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_INTRQ__IPU_CSI_D_2 = IOMUX_PAD(0x720, 0x2bc, 1, 0x938, 3, NO_PAD_CTRL),
+ MX35_PAD_ATA_INTRQ__KPP_ROW_2 = IOMUX_PAD(0x720, 0x2bc, 3, 0x978, 2, NO_PAD_CTRL),
+ MX35_PAD_ATA_INTRQ__GPIO2_29 = IOMUX_PAD(0x720, 0x2bc, 5, 0x8bc, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_INTRQ__IPU_DIAGB_23 = IOMUX_PAD(0x720, 0x2bc, 6, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN = IOMUX_PAD(0x724, 0x2c0, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3 = IOMUX_PAD(0x724, 0x2c0, 1, 0x93c, 3, NO_PAD_CTRL),
+ MX35_PAD_ATA_BUFF_EN__KPP_ROW_3 = IOMUX_PAD(0x724, 0x2c0, 3, 0x97c, 2, NO_PAD_CTRL),
+ MX35_PAD_ATA_BUFF_EN__GPIO2_30 = IOMUX_PAD(0x724, 0x2c0, 5, 0x8c4, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24 = IOMUX_PAD(0x724, 0x2c0, 6, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_ATA_DMARQ__ATA_DMARQ = IOMUX_PAD(0x728, 0x2c4, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DMARQ__IPU_CSI_D_4 = IOMUX_PAD(0x728, 0x2c4, 1, 0x940, 2, NO_PAD_CTRL),
+ MX35_PAD_ATA_DMARQ__KPP_COL_0 = IOMUX_PAD(0x728, 0x2c4, 3, 0x950, 2, NO_PAD_CTRL),
+ MX35_PAD_ATA_DMARQ__GPIO2_31 = IOMUX_PAD(0x728, 0x2c4, 5, 0x8c8, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DMARQ__IPU_DIAGB_25 = IOMUX_PAD(0x728, 0x2c4, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4 = IOMUX_PAD(0x728, 0x2c4, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_ATA_DA0__ATA_DA_0 = IOMUX_PAD(0x72c, 0x2c8, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DA0__IPU_CSI_D_5 = IOMUX_PAD(0x72c, 0x2c8, 1, 0x944, 2, NO_PAD_CTRL),
+ MX35_PAD_ATA_DA0__KPP_COL_1 = IOMUX_PAD(0x72c, 0x2c8, 3, 0x954, 2, NO_PAD_CTRL),
+ MX35_PAD_ATA_DA0__GPIO3_0 = IOMUX_PAD(0x72c, 0x2c8, 5, 0x8e8, 1, NO_PAD_CTRL),
+ MX35_PAD_ATA_DA0__IPU_DIAGB_26 = IOMUX_PAD(0x72c, 0x2c8, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5 = IOMUX_PAD(0x72c, 0x2c8, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_ATA_DA1__ATA_DA_1 = IOMUX_PAD(0x730, 0x2cc, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DA1__IPU_CSI_D_6 = IOMUX_PAD(0x730, 0x2cc, 1, 0x948, 2, NO_PAD_CTRL),
+ MX35_PAD_ATA_DA1__KPP_COL_2 = IOMUX_PAD(0x730, 0x2cc, 3, 0x958, 2, NO_PAD_CTRL),
+ MX35_PAD_ATA_DA1__GPIO3_1 = IOMUX_PAD(0x730, 0x2cc, 5, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DA1__IPU_DIAGB_27 = IOMUX_PAD(0x730, 0x2cc, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6 = IOMUX_PAD(0x730, 0x2cc, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_ATA_DA2__ATA_DA_2 = IOMUX_PAD(0x734, 0x2d0, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DA2__IPU_CSI_D_7 = IOMUX_PAD(0x734, 0x2d0, 1, 0x94c, 2, NO_PAD_CTRL),
+ MX35_PAD_ATA_DA2__KPP_COL_3 = IOMUX_PAD(0x734, 0x2d0, 3, 0x95c, 2, NO_PAD_CTRL),
+ MX35_PAD_ATA_DA2__GPIO3_2 = IOMUX_PAD(0x734, 0x2d0, 5, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DA2__IPU_DIAGB_28 = IOMUX_PAD(0x734, 0x2d0, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7 = IOMUX_PAD(0x734, 0x2d0, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_MLB_CLK__MLB_MLBCLK = IOMUX_PAD(0x738, 0x2d4, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_MLB_CLK__GPIO3_3 = IOMUX_PAD(0x738, 0x2d4, 5, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_MLB_DAT__MLB_MLBDAT = IOMUX_PAD(0x73c, 0x2d8, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_MLB_DAT__GPIO3_4 = IOMUX_PAD(0x73c, 0x2d8, 5, 0x904, 1, NO_PAD_CTRL),
+
+ MX35_PAD_MLB_SIG__MLB_MLBSIG = IOMUX_PAD(0x740, 0x2dc, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_MLB_SIG__GPIO3_5 = IOMUX_PAD(0x740, 0x2dc, 5, 0x908, 1, NO_PAD_CTRL),
+
+ MX35_PAD_FEC_TX_CLK__FEC_TX_CLK = IOMUX_PAD(0x744, 0x2e0, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4 = IOMUX_PAD(0x744, 0x2e0, 1, 0x804, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX = IOMUX_PAD(0x744, 0x2e0, 2, 0x9a0, 3, NO_PAD_CTRL),
+ MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR = IOMUX_PAD(0x744, 0x2e0, 3, 0x9ec, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_TX_CLK__CSPI2_MOSI = IOMUX_PAD(0x744, 0x2e0, 4, 0x7ec, 3, NO_PAD_CTRL),
+ MX35_PAD_FEC_TX_CLK__GPIO3_6 = IOMUX_PAD(0x744, 0x2e0, 5, 0x90c, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC = IOMUX_PAD(0x744, 0x2e0, 6, 0x928, 5, NO_PAD_CTRL),
+ MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0 = IOMUX_PAD(0x744, 0x2e0, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_FEC_RX_CLK__FEC_RX_CLK = IOMUX_PAD(0x748, 0x2e4, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5 = IOMUX_PAD(0x748, 0x2e4, 1, 0x808, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX = IOMUX_PAD(0x748, 0x2e4, 2, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP = IOMUX_PAD(0x748, 0x2e4, 3, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_RX_CLK__CSPI2_MISO = IOMUX_PAD(0x748, 0x2e4, 4, 0x7e8, 3, NO_PAD_CTRL),
+ MX35_PAD_FEC_RX_CLK__GPIO3_7 = IOMUX_PAD(0x748, 0x2e4, 5, 0x910, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I = IOMUX_PAD(0x748, 0x2e4, 6, 0x92c, 4, NO_PAD_CTRL),
+ MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1 = IOMUX_PAD(0x748, 0x2e4, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_FEC_RX_DV__FEC_RX_DV = IOMUX_PAD(0x74c, 0x2e8, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_RX_DV__ESDHC1_DAT6 = IOMUX_PAD(0x74c, 0x2e8, 1, 0x80c, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_RX_DV__UART3_RTS = IOMUX_PAD(0x74c, 0x2e8, 2, 0x99c, 2, NO_PAD_CTRL),
+ MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT = IOMUX_PAD(0x74c, 0x2e8, 3, 0x9f0, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_RX_DV__CSPI2_SCLK = IOMUX_PAD(0x74c, 0x2e8, 4, 0x7e0, 3, NO_PAD_CTRL),
+ MX35_PAD_FEC_RX_DV__GPIO3_8 = IOMUX_PAD(0x74c, 0x2e8, 5, 0x914, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK = IOMUX_PAD(0x74c, 0x2e8, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2 = IOMUX_PAD(0x74c, 0x2e8, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_FEC_COL__FEC_COL = IOMUX_PAD(0x750, 0x2ec, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_COL__ESDHC1_DAT7 = IOMUX_PAD(0x750, 0x2ec, 1, 0x810, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_COL__UART3_CTS = IOMUX_PAD(0x750, 0x2ec, 2, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0 = IOMUX_PAD(0x750, 0x2ec, 3, 0x9cc, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_COL__CSPI2_RDY = IOMUX_PAD(0x750, 0x2ec, 4, 0x7e4, 3, NO_PAD_CTRL),
+ MX35_PAD_FEC_COL__GPIO3_9 = IOMUX_PAD(0x750, 0x2ec, 5, 0x918, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_COL__IPU_DISPB_SER_RS = IOMUX_PAD(0x750, 0x2ec, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3 = IOMUX_PAD(0x750, 0x2ec, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_FEC_RDATA0__FEC_RDATA_0 = IOMUX_PAD(0x754, 0x2f0, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_RDATA0__PWM_PWMO = IOMUX_PAD(0x754, 0x2f0, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_RDATA0__UART3_DTR = IOMUX_PAD(0x754, 0x2f0, 2, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1 = IOMUX_PAD(0x754, 0x2f0, 3, 0x9d0, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_RDATA0__CSPI2_SS0 = IOMUX_PAD(0x754, 0x2f0, 4, 0x7f0, 2, NO_PAD_CTRL),
+ MX35_PAD_FEC_RDATA0__GPIO3_10 = IOMUX_PAD(0x754, 0x2f0, 5, 0x8ec, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1 = IOMUX_PAD(0x754, 0x2f0, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4 = IOMUX_PAD(0x754, 0x2f0, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_FEC_TDATA0__FEC_TDATA_0 = IOMUX_PAD(0x758, 0x2f4, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1 = IOMUX_PAD(0x758, 0x2f4, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_TDATA0__UART3_DSR = IOMUX_PAD(0x758, 0x2f4, 2, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2 = IOMUX_PAD(0x758, 0x2f4, 3, 0x9d4, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_TDATA0__CSPI2_SS1 = IOMUX_PAD(0x758, 0x2f4, 4, 0x7f4, 2, NO_PAD_CTRL),
+ MX35_PAD_FEC_TDATA0__GPIO3_11 = IOMUX_PAD(0x758, 0x2f4, 5, 0x8f0, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0 = IOMUX_PAD(0x758, 0x2f4, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5 = IOMUX_PAD(0x758, 0x2f4, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_FEC_TX_EN__FEC_TX_EN = IOMUX_PAD(0x75c, 0x2f8, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1 = IOMUX_PAD(0x75c, 0x2f8, 1, 0x998, 3, NO_PAD_CTRL),
+ MX35_PAD_FEC_TX_EN__UART3_RI = IOMUX_PAD(0x75c, 0x2f8, 2, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3 = IOMUX_PAD(0x75c, 0x2f8, 3, 0x9d8, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_TX_EN__GPIO3_12 = IOMUX_PAD(0x75c, 0x2f8, 5, 0x8f4, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS = IOMUX_PAD(0x75c, 0x2f8, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6 = IOMUX_PAD(0x75c, 0x2f8, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_FEC_MDC__FEC_MDC = IOMUX_PAD(0x760, 0x2fc, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_MDC__CAN2_TXCAN = IOMUX_PAD(0x760, 0x2fc, 1, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_MDC__UART3_DCD = IOMUX_PAD(0x760, 0x2fc, 2, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4 = IOMUX_PAD(0x760, 0x2fc, 3, 0x9dc, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_MDC__GPIO3_13 = IOMUX_PAD(0x760, 0x2fc, 5, 0x8f8, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_MDC__IPU_DISPB_WR = IOMUX_PAD(0x760, 0x2fc, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7 = IOMUX_PAD(0x760, 0x2fc, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_FEC_MDIO__FEC_MDIO = IOMUX_PAD(0x764, 0x300, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_MDIO__CAN2_RXCAN = IOMUX_PAD(0x764, 0x300, 1, 0x7cc, 2, NO_PAD_CTRL),
+ MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5 = IOMUX_PAD(0x764, 0x300, 3, 0x9e0, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_MDIO__GPIO3_14 = IOMUX_PAD(0x764, 0x300, 5, 0x8fc, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_MDIO__IPU_DISPB_RD = IOMUX_PAD(0x764, 0x300, 6, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8 = IOMUX_PAD(0x764, 0x300, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_FEC_TX_ERR__FEC_TX_ERR = IOMUX_PAD(0x768, 0x304, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_TX_ERR__OWIRE_LINE = IOMUX_PAD(0x768, 0x304, 1, 0x990, 2, NO_PAD_CTRL),
+ MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK = IOMUX_PAD(0x768, 0x304, 2, 0x994, 4, NO_PAD_CTRL),
+ MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6 = IOMUX_PAD(0x768, 0x304, 3, 0x9e4, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_TX_ERR__GPIO3_15 = IOMUX_PAD(0x768, 0x304, 5, 0x900, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC = IOMUX_PAD(0x768, 0x304, 6, 0x924, 3, NO_PAD_CTRL),
+ MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9 = IOMUX_PAD(0x768, 0x304, 7, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_FEC_RX_ERR__FEC_RX_ERR = IOMUX_PAD(0x76c, 0x308, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0 = IOMUX_PAD(0x76c, 0x308, 1, 0x930, 3, NO_PAD_CTRL),
+ MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7 = IOMUX_PAD(0x76c, 0x308, 3, 0x9e8, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_RX_ERR__KPP_COL_4 = IOMUX_PAD(0x76c, 0x308, 4, 0x960, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_RX_ERR__GPIO3_16 = IOMUX_PAD(0x76c, 0x308, 5, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO = IOMUX_PAD(0x76c, 0x308, 6, 0x92c, 5, NO_PAD_CTRL),
+
+ MX35_PAD_FEC_CRS__FEC_CRS = IOMUX_PAD(0x770, 0x30c, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_CRS__IPU_CSI_D_1 = IOMUX_PAD(0x770, 0x30c, 1, 0x934, 3, NO_PAD_CTRL),
+ MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR = IOMUX_PAD(0x770, 0x30c, 3, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_CRS__KPP_COL_5 = IOMUX_PAD(0x770, 0x30c, 4, 0x964, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_CRS__GPIO3_17 = IOMUX_PAD(0x770, 0x30c, 5, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_CRS__IPU_FLASH_STROBE = IOMUX_PAD(0x770, 0x30c, 6, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_FEC_RDATA1__FEC_RDATA_1 = IOMUX_PAD(0x774, 0x310, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_RDATA1__IPU_CSI_D_2 = IOMUX_PAD(0x774, 0x310, 1, 0x938, 4, NO_PAD_CTRL),
+ MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC = IOMUX_PAD(0x774, 0x310, 2, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC = IOMUX_PAD(0x774, 0x310, 3, 0x9f4, 2, NO_PAD_CTRL),
+ MX35_PAD_FEC_RDATA1__KPP_COL_6 = IOMUX_PAD(0x774, 0x310, 4, 0x968, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_RDATA1__GPIO3_18 = IOMUX_PAD(0x774, 0x310, 5, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0 = IOMUX_PAD(0x774, 0x310, 6, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_FEC_TDATA1__FEC_TDATA_1 = IOMUX_PAD(0x778, 0x314, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_TDATA1__IPU_CSI_D_3 = IOMUX_PAD(0x778, 0x314, 1, 0x93c, 4, NO_PAD_CTRL),
+ MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS = IOMUX_PAD(0x778, 0x314, 2, 0x7bc, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_TDATA1__KPP_COL_7 = IOMUX_PAD(0x778, 0x314, 4, 0x96c, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_TDATA1__GPIO3_19 = IOMUX_PAD(0x778, 0x314, 5, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1 = IOMUX_PAD(0x778, 0x314, 6, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_FEC_RDATA2__FEC_RDATA_2 = IOMUX_PAD(0x77c, 0x318, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_RDATA2__IPU_CSI_D_4 = IOMUX_PAD(0x77c, 0x318, 1, 0x940, 3, NO_PAD_CTRL),
+ MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD = IOMUX_PAD(0x77c, 0x318, 2, 0x7b4, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_RDATA2__KPP_ROW_4 = IOMUX_PAD(0x77c, 0x318, 4, 0x980, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_RDATA2__GPIO3_20 = IOMUX_PAD(0x77c, 0x318, 5, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_FEC_TDATA2__FEC_TDATA_2 = IOMUX_PAD(0x780, 0x31c, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_TDATA2__IPU_CSI_D_5 = IOMUX_PAD(0x780, 0x31c, 1, 0x944, 3, NO_PAD_CTRL),
+ MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD = IOMUX_PAD(0x780, 0x31c, 2, 0x7b0, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_TDATA2__KPP_ROW_5 = IOMUX_PAD(0x780, 0x31c, 4, 0x984, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_TDATA2__GPIO3_21 = IOMUX_PAD(0x780, 0x31c, 5, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_FEC_RDATA3__FEC_RDATA_3 = IOMUX_PAD(0x784, 0x320, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_RDATA3__IPU_CSI_D_6 = IOMUX_PAD(0x784, 0x320, 1, 0x948, 3, NO_PAD_CTRL),
+ MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC = IOMUX_PAD(0x784, 0x320, 2, 0x7c0, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_RDATA3__KPP_ROW_6 = IOMUX_PAD(0x784, 0x320, 4, 0x988, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_RDATA3__GPIO3_22 = IOMUX_PAD(0x784, 0x320, 6, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_FEC_TDATA3__FEC_TDATA_3 = IOMUX_PAD(0x788, 0x324, 0, 0x0, 0, NO_PAD_CTRL),
+ MX35_PAD_FEC_TDATA3__IPU_CSI_D_7 = IOMUX_PAD(0x788, 0x324, 1, 0x94c, 3, NO_PAD_CTRL),
+ MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS = IOMUX_PAD(0x788, 0x324, 2, 0x7c4, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_TDATA3__KPP_ROW_7 = IOMUX_PAD(0x788, 0x324, 4, 0x98c, 1, NO_PAD_CTRL),
+ MX35_PAD_FEC_TDATA3__GPIO3_23 = IOMUX_PAD(0x788, 0x324, 5, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK = IOMUX_PAD(0x78c, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+
+ MX35_PAD_TEST_MODE__TCU_TEST_MODE = IOMUX_PAD(0x790, 0x0, 0, 0x0, 0, NO_PAD_CTRL),
+};
+
+#endif /* __IOMUX_MX35_H__ */
diff --git a/arch/arm/include/asm/arch-mx35/iomux.h b/arch/arm/include/asm/arch-mx35/iomux.h
deleted file mode 100644
index 52c15bc..0000000
--- a/arch/arm/include/asm/arch-mx35/iomux.h
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * (C) Copyright 2011
- * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
- *
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __MACH_MX35_IOMUX_H__
-#define __MACH_MX35_IOMUX_H__
-
-#include <asm/arch/imx-regs.h>
-
-/*
- * various IOMUX functions
- */
-typedef enum iomux_pin_config {
- MUX_CONFIG_FUNC = 0, /* used as function */
- MUX_CONFIG_ALT1, /* used as alternate function 1 */
- MUX_CONFIG_ALT2, /* used as alternate function 2 */
- MUX_CONFIG_ALT3, /* used as alternate function 3 */
- MUX_CONFIG_ALT4, /* used as alternate function 4 */
- MUX_CONFIG_ALT5, /* used as alternate function 5 */
- MUX_CONFIG_ALT6, /* used as alternate function 6 */
- MUX_CONFIG_ALT7, /* used as alternate function 7 */
- MUX_CONFIG_SION = 0x1 << 4, /* used as LOOPBACK:MUX SION bit */
- MUX_CONFIG_GPIO = MUX_CONFIG_ALT5, /* used as GPIO */
-} iomux_pin_cfg_t;
-
-/*
- * various IOMUX pad functions
- */
-typedef enum iomux_pad_config {
- PAD_CTL_DRV_3_3V = 0x0 << 13,
- PAD_CTL_DRV_1_8V = 0x1 << 13,
- PAD_CTL_HYS_CMOS = 0x0 << 8,
- PAD_CTL_HYS_SCHMITZ = 0x1 << 8,
- PAD_CTL_PKE_NONE = 0x0 << 7,
- PAD_CTL_PKE_ENABLE = 0x1 << 7,
- PAD_CTL_PUE_KEEPER = 0x0 << 6,
- PAD_CTL_PUE_PUD = 0x1 << 6,
- PAD_CTL_100K_PD = 0x0 << 4,
- PAD_CTL_47K_PU = 0x1 << 4,
- PAD_CTL_100K_PU = 0x2 << 4,
- PAD_CTL_22K_PU = 0x3 << 4,
- PAD_CTL_ODE_CMOS = 0x0 << 3,
- PAD_CTL_ODE_OpenDrain = 0x1 << 3,
- PAD_CTL_DRV_NORMAL = 0x0 << 1,
- PAD_CTL_DRV_HIGH = 0x1 << 1,
- PAD_CTL_DRV_MAX = 0x2 << 1,
- PAD_CTL_SRE_SLOW = 0x0 << 0,
- PAD_CTL_SRE_FAST = 0x1 << 0
-} iomux_pad_config_t;
-
-/*
- * various IOMUX general purpose functions
- */
-typedef enum iomux_gp_func {
- MUX_SDCTL_CSD0_SEL = 0x1 << 0,
- MUX_SDCTL_CSD1_SEL = 0x1 << 1,
- MUX_TAMPER_DETECT_EN = 0x1 << 2,
-} iomux_gp_func_t;
-
-/*
- * various IOMUX input select register index
- */
-typedef enum iomux_input_select {
- MUX_IN_AMX_P5_RXCLK = 0,
- MUX_IN_AMX_P5_RXFS,
- MUX_IN_AMX_P6_DA,
- MUX_IN_AMX_P6_DB,
- MUX_IN_AMX_P6_RXCLK,
- MUX_IN_AMX_P6_RXFS,
- MUX_IN_AMX_P6_TXCLK,
- MUX_IN_AMX_P6_TXFS,
- MUX_IN_CAN1_CANRX,
- MUX_IN_CAN2_CANRX,
- MUX_IN_CCM_32K_MUXED,
- MUX_IN_CCM_PMIC_RDY,
- MUX_IN_CSPI1_SS2_B,
- MUX_IN_CSPI1_SS3_B,
- MUX_IN_CSPI2_CLK_IN,
- MUX_IN_CSPI2_DATAREADY_B,
- MUX_IN_CSPI2_MISO,
- MUX_IN_CSPI2_MOSI,
- MUX_IN_CSPI2_SS0_B,
- MUX_IN_CSPI2_SS1_B,
- MUX_IN_CSPI2_SS2_B,
- MUX_IN_CSPI2_SS3_B,
- MUX_IN_EMI_WEIM_DTACK_B,
- MUX_IN_ESDHC1_DAT4_IN,
- MUX_IN_ESDHC1_DAT5_IN,
- MUX_IN_ESDHC1_DAT6_IN,
- MUX_IN_ESDHC1_DAT7_IN,
- MUX_IN_ESDHC3_CARD_CLK_IN,
- MUX_IN_ESDHC3_CMD_IN,
- MUX_IN_ESDHC3_DAT0,
- MUX_IN_ESDHC3_DAT1,
- MUX_IN_ESDHC3_DAT2,
- MUX_IN_ESDHC3_DAT3,
- MUX_IN_GPIO1_IN_0,
- MUX_IN_GPIO1_IN_10,
- MUX_IN_GPIO1_IN_11,
- MUX_IN_GPIO1_IN_1,
- MUX_IN_GPIO1_IN_20,
- MUX_IN_GPIO1_IN_21,
- MUX_IN_GPIO1_IN_22,
- MUX_IN_GPIO1_IN_2,
- MUX_IN_GPIO1_IN_3,
- MUX_IN_GPIO1_IN_4,
- MUX_IN_GPIO1_IN_5,
- MUX_IN_GPIO1_IN_6,
- MUX_IN_GPIO1_IN_7,
- MUX_IN_GPIO1_IN_8,
- MUX_IN_GPIO1_IN_9,
- MUX_IN_GPIO2_IN_0,
- MUX_IN_GPIO2_IN_10,
- MUX_IN_GPIO2_IN_11,
- MUX_IN_GPIO2_IN_12,
- MUX_IN_GPIO2_IN_13,
- MUX_IN_GPIO2_IN_14,
- MUX_IN_GPIO2_IN_15,
- MUX_IN_GPIO2_IN_16,
- MUX_IN_GPIO2_IN_17,
- MUX_IN_GPIO2_IN_18,
- MUX_IN_GPIO2_IN_19,
- MUX_IN_GPIO2_IN_20,
- MUX_IN_GPIO2_IN_21,
- MUX_IN_GPIO2_IN_22,
- MUX_IN_GPIO2_IN_23,
- MUX_IN_GPIO2_IN_24,
- MUX_IN_GPIO2_IN_25,
- MUX_IN_GPIO2_IN_26,
- MUX_IN_GPIO2_IN_27,
- MUX_IN_GPIO2_IN_28,
- MUX_IN_GPIO2_IN_29,
- MUX_IN_GPIO2_IN_2,
- MUX_IN_GPIO2_IN_30,
- MUX_IN_GPIO2_IN_31,
- MUX_IN_GPIO2_IN_3,
- MUX_IN_GPIO2_IN_4,
- MUX_IN_GPIO2_IN_5,
- MUX_IN_GPIO2_IN_6,
- MUX_IN_GPIO2_IN_7,
- MUX_IN_GPIO2_IN_8,
- MUX_IN_GPIO2_IN_9,
- MUX_IN_GPIO3_IN_0,
- MUX_IN_GPIO3_IN_10,
- MUX_IN_GPIO3_IN_11,
- MUX_IN_GPIO3_IN_12,
- MUX_IN_GPIO3_IN_13,
- MUX_IN_GPIO3_IN_14,
- MUX_IN_GPIO3_IN_15,
- MUX_IN_GPIO3_IN_4,
- MUX_IN_GPIO3_IN_5,
- MUX_IN_GPIO3_IN_6,
- MUX_IN_GPIO3_IN_7,
- MUX_IN_GPIO3_IN_8,
- MUX_IN_GPIO3_IN_9,
- MUX_IN_I2C3_SCL_IN,
- MUX_IN_I2C3_SDA_IN,
- MUX_IN_IPU_DISPB_D0_VSYNC,
- MUX_IN_IPU_DISPB_D12_VSYNC,
- MUX_IN_IPU_DISPB_SD_D,
- MUX_IN_IPU_SENSB_DATA_0,
- MUX_IN_IPU_SENSB_DATA_1,
- MUX_IN_IPU_SENSB_DATA_2,
- MUX_IN_IPU_SENSB_DATA_3,
- MUX_IN_IPU_SENSB_DATA_4,
- MUX_IN_IPU_SENSB_DATA_5,
- MUX_IN_IPU_SENSB_DATA_6,
- MUX_IN_IPU_SENSB_DATA_7,
- MUX_IN_KPP_COL_0,
- MUX_IN_KPP_COL_1,
- MUX_IN_KPP_COL_2,
- MUX_IN_KPP_COL_3,
- MUX_IN_KPP_COL_4,
- MUX_IN_KPP_COL_5,
- MUX_IN_KPP_COL_6,
- MUX_IN_KPP_COL_7,
- MUX_IN_KPP_ROW_0,
- MUX_IN_KPP_ROW_1,
- MUX_IN_KPP_ROW_2,
- MUX_IN_KPP_ROW_3,
- MUX_IN_KPP_ROW_4,
- MUX_IN_KPP_ROW_5,
- MUX_IN_KPP_ROW_6,
- MUX_IN_KPP_ROW_7,
- MUX_IN_OWIRE_BATTERY_LINE,
- MUX_IN_SPDIF_HCKT_CLK2,
- MUX_IN_SPDIF_SPDIF_IN1,
- MUX_IN_UART3_UART_RTS_B,
- MUX_IN_UART3_UART_RXD_MUX,
- MUX_IN_USB_OTG_DATA_0,
- MUX_IN_USB_OTG_DATA_1,
- MUX_IN_USB_OTG_DATA_2,
- MUX_IN_USB_OTG_DATA_3,
- MUX_IN_USB_OTG_DATA_4,
- MUX_IN_USB_OTG_DATA_5,
- MUX_IN_USB_OTG_DATA_6,
- MUX_IN_USB_OTG_DATA_7,
- MUX_IN_USB_OTG_DIR,
- MUX_IN_USB_OTG_NXT,
- MUX_IN_USB_UH2_DATA_0,
- MUX_IN_USB_UH2_DATA_1,
- MUX_IN_USB_UH2_DATA_2,
- MUX_IN_USB_UH2_DATA_3,
- MUX_IN_USB_UH2_DATA_4,
- MUX_IN_USB_UH2_DATA_5,
- MUX_IN_USB_UH2_DATA_6,
- MUX_IN_USB_UH2_DATA_7,
- MUX_IN_USB_UH2_DIR,
- MUX_IN_USB_UH2_NXT,
- MUX_IN_USB_UH2_USB_OC,
-} iomux_input_select_t;
-
-/*
- * various IOMUX input functions
- */
-typedef enum iomux_input_config {
- INPUT_CTL_PATH0 = 0x0,
- INPUT_CTL_PATH1,
- INPUT_CTL_PATH2,
- INPUT_CTL_PATH3,
- INPUT_CTL_PATH4,
- INPUT_CTL_PATH5,
- INPUT_CTL_PATH6,
- INPUT_CTL_PATH7,
-} iomux_input_cfg_t;
-
-/*
- * Request ownership for an IO pin. This function has to be the first one
- * being called before that pin is used. The caller has to check the
- * return value to make sure it returns 0.
- *
- * @param pin a name defined by iomux_pin_name_t
- * @param cfg an input function as defined in iomux_pin_cfg_t
- *
- * @return 0 if successful; Non-zero otherwise
- */
-void mxc_request_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t cfg);
-
-/*
- * Release ownership for an IO pin
- *
- * @param pin a name defined by iomux_pin_name_t
- * @param cfg an input function as defined in iomux_pin_cfg_t
- */
-void mxc_free_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t cfg);
-
-/*
- * This function enables/disables the general purpose function for a particular
- * signal.
- *
- * @param gp one signal as defined in iomux_gp_func_t
- * @param en 1 to enable; 0 to disable
- */
-void mxc_iomux_set_gpr(iomux_gp_func_t gp, int en);
-
-/*
- * This function configures the pad value for a IOMUX pin.
- *
- * @param pin a pin number as defined in iomux_pin_name_t
- * @param config the ORed value of elements defined in
- * iomux_pad_config_t
- */
-void mxc_iomux_set_pad(iomux_pin_name_t pin, u32 config);
-
-/*
- * This function configures input path.
- *
- * @param input index of input select register as defined in
- * iomux_input_select_t
- * @param config the binary value of elements defined in
- * iomux_input_cfg_t
- */
-void mxc_iomux_set_input(iomux_input_select_t input, u32 config);
-#endif
diff --git a/arch/arm/include/asm/arch-mx35/mx35_pins.h b/arch/arm/include/asm/arch-mx35/mx35_pins.h
deleted file mode 100644
index 00e5e75..0000000
--- a/arch/arm/include/asm/arch-mx35/mx35_pins.h
+++ /dev/null
@@ -1,353 +0,0 @@
-/*
- * (C) Copyright 2011
- * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
- *
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_MXC_MX35_PINS_H__
-#define __ASM_ARCH_MXC_MX35_PINS_H__
-
-/*!
- * @file arch-mxc/mx35_pins.h
- *
- * @brief MX35 I/O Pin List
- *
- * @ingroup GPIO_MX35
- */
-
-#ifndef __ASSEMBLY__
-
-/*!
- * @name IOMUX/PAD Bit field definitions
- */
-
-/*! @{ */
-
-/*!
- * In order to identify pins more effectively, each mux-controlled pin's
- * enumerated value is constructed in the following way:
- *
- * -------------------------------------------------------------------
- * 31-29 | 28 - 24 |23 - 21| 20 - 10| 9 - 0
- * -------------------------------------------------------------------
- * IO_P | IO_I | RSVD | PAD_I | MUX_I
- * -------------------------------------------------------------------
- *
- * Bit 0 to 7 contains MUX_I used to identify the register
- * offset (base is IOMUX_module_base ) defined in the Section
- * "sw_pad_ctl & sw_mux_ctl details" of the IC Spec. The similar field
- * definitions are used for the pad control register.the MX35_PIN_A0 is
- * defined in the enumeration: ( 0x28 << MUX_I) |( 0x368 << PAD_I)
- * So the absolute address is: IOMUX_module_base + 0x28.
- * The pad control register offset is: 0x368.
- */
-
-/*!
- * Starting bit position within each entry of \b iomux_pins to represent the
- * MUX control register offset
- */
-#define MUX_I 0
-/*!
- * Starting bit position within each entry of \b iomux_pins to represent the
- * PAD control register offset
- */
-#define PAD_I 10
-
-/*!
- * Starting bit position within each entry of \b iomux_pins to represent the
- * reserved filed
- */
-#define RSVD_I 21
-
-#define MUX_IO_P 29
-#define MUX_IO_I 24
-#define IOMUX_TO_GPIO(pin) ((((unsigned int)pin >> MUX_IO_P) * \
- GPIO_NUM_PIN) + ((pin >> MUX_IO_I) &\
- ((1 << (MUX_IO_P - MUX_IO_I)) - 1)))
-#define IOMUX_TO_IRQ(pin) (MXC_GPIO_INT_BASE + IOMUX_TO_GPIO(pin))
-
-#define NON_GPIO_I 0x7
-#define PIN_TO_MUX_MASK ((1<<(PAD_I - MUX_I)) - 1)
-#define PIN_TO_PAD_MASK ((1<<(RSVD_I - PAD_I)) - 1)
-#define NON_MUX_I PIN_TO_MUX_MASK
-
-#define _MXC_BUILD_PIN(gp, gi, mi, pi) \
- (((gp) << MUX_IO_P) | ((gi) << MUX_IO_I) | \
- ((mi) << MUX_I) | ((pi) << PAD_I))
-
-#define _MXC_BUILD_GPIO_PIN(gp, gi, mi, pi) \
- _MXC_BUILD_PIN(gp, gi, mi, pi)
-
-#define _MXC_BUILD_NON_GPIO_PIN(mi, pi) \
- _MXC_BUILD_PIN(NON_GPIO_I, 0, mi, pi)
-
-#define PIN_TO_IOMUX_MUX(pin) ((pin >> MUX_I) & PIN_TO_MUX_MASK)
-#define PIN_TO_IOMUX_PAD(pin) ((pin >> PAD_I) & PIN_TO_PAD_MASK)
-
-/*! @} End IOMUX/PAD Bit field definitions */
-
-/*!
- * This enumeration is constructed based on the Section
- * "sw_pad_ctl & sw_mux_ctl details" of the MX35 IC Spec. Each enumerated
- * value is constructed based on the rules described above.
- */
-typedef enum iomux_pins {
- MX35_PIN_CAPTURE = _MXC_BUILD_GPIO_PIN(0, 4, 0x4, 0x328),
- MX35_PIN_COMPARE = _MXC_BUILD_GPIO_PIN(0, 5, 0x8, 0x32C),
- MX35_PIN_WATCHDOG_RST = _MXC_BUILD_GPIO_PIN(0, 6, 0xC, 0x330),
- MX35_PIN_GPIO1_0 = _MXC_BUILD_GPIO_PIN(0, 0, 0x10, 0x334),
- MX35_PIN_GPIO1_1 = _MXC_BUILD_GPIO_PIN(0, 1, 0x14, 0x338),
- MX35_PIN_GPIO2_0 = _MXC_BUILD_GPIO_PIN(1, 0, 0x18, 0x33C),
- MX35_PIN_GPIO3_0 = _MXC_BUILD_GPIO_PIN(2, 1, 0x1C, 0x340),
- MX35_PIN_CLKO = _MXC_BUILD_GPIO_PIN(0, 8, 0x20, 0x34C),
-
- MX35_PIN_POWER_FAIL = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x360),
- MX35_PIN_VSTBY = _MXC_BUILD_GPIO_PIN(0, 7, 0x24, 0x364),
- MX35_PIN_A0 = _MXC_BUILD_NON_GPIO_PIN(0x28, 0x368),
- MX35_PIN_A1 = _MXC_BUILD_NON_GPIO_PIN(0x2C, 0x36C),
- MX35_PIN_A2 = _MXC_BUILD_NON_GPIO_PIN(0x30, 0x370),
- MX35_PIN_A3 = _MXC_BUILD_NON_GPIO_PIN(0x34, 0x374),
- MX35_PIN_A4 = _MXC_BUILD_NON_GPIO_PIN(0x38, 0x378),
- MX35_PIN_A5 = _MXC_BUILD_NON_GPIO_PIN(0x3C, 0x37C),
- MX35_PIN_A6 = _MXC_BUILD_NON_GPIO_PIN(0x40, 0x380),
- MX35_PIN_A7 = _MXC_BUILD_NON_GPIO_PIN(0x44, 0x384),
- MX35_PIN_A8 = _MXC_BUILD_NON_GPIO_PIN(0x48, 0x388),
- MX35_PIN_A9 = _MXC_BUILD_NON_GPIO_PIN(0x4C, 0x38C),
- MX35_PIN_A10 = _MXC_BUILD_NON_GPIO_PIN(0x50, 0x390),
- MX35_PIN_MA10 = _MXC_BUILD_NON_GPIO_PIN(0x54, 0x394),
- MX35_PIN_A11 = _MXC_BUILD_NON_GPIO_PIN(0x58, 0x398),
- MX35_PIN_A12 = _MXC_BUILD_NON_GPIO_PIN(0x5C, 0x39C),
- MX35_PIN_A13 = _MXC_BUILD_NON_GPIO_PIN(0x60, 0x3A0),
- MX35_PIN_A14 = _MXC_BUILD_NON_GPIO_PIN(0x64, 0x3A4),
- MX35_PIN_A15 = _MXC_BUILD_NON_GPIO_PIN(0x68, 0x3A8),
- MX35_PIN_A16 = _MXC_BUILD_NON_GPIO_PIN(0x6C, 0x3AC),
- MX35_PIN_A17 = _MXC_BUILD_NON_GPIO_PIN(0x70, 0x3B0),
- MX35_PIN_A18 = _MXC_BUILD_NON_GPIO_PIN(0x74, 0x3B4),
- MX35_PIN_A19 = _MXC_BUILD_NON_GPIO_PIN(0x78, 0x3B8),
- MX35_PIN_A20 = _MXC_BUILD_NON_GPIO_PIN(0x7C, 0x3BC),
- MX35_PIN_A21 = _MXC_BUILD_NON_GPIO_PIN(0x80, 0x3C0),
- MX35_PIN_A22 = _MXC_BUILD_NON_GPIO_PIN(0x84, 0x3C4),
- MX35_PIN_A23 = _MXC_BUILD_NON_GPIO_PIN(0x88, 0x3C8),
- MX35_PIN_A24 = _MXC_BUILD_NON_GPIO_PIN(0x8C, 0x3CC),
- MX35_PIN_A25 = _MXC_BUILD_NON_GPIO_PIN(0x90, 0x3D0),
-
- MX35_PIN_EB0 = _MXC_BUILD_NON_GPIO_PIN(0x94, 0x46C),
- MX35_PIN_EB1 = _MXC_BUILD_NON_GPIO_PIN(0x98, 0x470),
- MX35_PIN_OE = _MXC_BUILD_NON_GPIO_PIN(0x9C, 0x474),
- MX35_PIN_CS0 = _MXC_BUILD_NON_GPIO_PIN(0xA0, 0x478),
- MX35_PIN_CS1 = _MXC_BUILD_NON_GPIO_PIN(0xA4, 0x47C),
- MX35_PIN_CS2 = _MXC_BUILD_NON_GPIO_PIN(0xA8, 0x480),
- MX35_PIN_CS3 = _MXC_BUILD_NON_GPIO_PIN(0xAC, 0x484),
- MX35_PIN_CS4 = _MXC_BUILD_GPIO_PIN(0, 20, 0xB0, 0x488),
- MX35_PIN_CS5 = _MXC_BUILD_GPIO_PIN(0, 21, 0xB4, 0x48C),
- MX35_PIN_NFCE_B = _MXC_BUILD_GPIO_PIN(0, 22, 0xB8, 0x490),
-
- MX35_PIN_LBA = _MXC_BUILD_NON_GPIO_PIN(0xBC, 0x498),
- MX35_PIN_BCLK = _MXC_BUILD_NON_GPIO_PIN(0xC0, 0x49C),
- MX35_PIN_RW = _MXC_BUILD_NON_GPIO_PIN(0xC4, 0x4A0),
-
- MX35_PIN_NFWE_B = _MXC_BUILD_GPIO_PIN(0, 18, 0xC8, 0x4CC),
- MX35_PIN_NFRE_B = _MXC_BUILD_GPIO_PIN(0, 19, 0xCC, 0x4D0),
- MX35_PIN_NFALE = _MXC_BUILD_GPIO_PIN(0, 20, 0xD0, 0x4D4),
- MX35_PIN_NFCLE = _MXC_BUILD_GPIO_PIN(0, 21, 0xD4, 0x4D8),
- MX35_PIN_NFWP_B = _MXC_BUILD_GPIO_PIN(0, 22, 0xD8, 0x4DC),
- MX35_PIN_NFRB = _MXC_BUILD_GPIO_PIN(0, 23, 0xDC, 0x4E0),
-
- MX35_PIN_D15 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4E4),
- MX35_PIN_D14 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4E8),
- MX35_PIN_D13 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4EC),
- MX35_PIN_D12 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4F0),
- MX35_PIN_D11 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4F4),
- MX35_PIN_D10 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4F8),
- MX35_PIN_D9 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4FC),
- MX35_PIN_D8 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x500),
- MX35_PIN_D7 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x504),
- MX35_PIN_D6 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x508),
- MX35_PIN_D5 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x50C),
- MX35_PIN_D4 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x510),
- MX35_PIN_D3 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x514),
- MX35_PIN_D2 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x518),
- MX35_PIN_D1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x51C),
- MX35_PIN_D0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x520),
-
- MX35_PIN_CSI_D8 = _MXC_BUILD_GPIO_PIN(0, 20, 0xE0, 0x524),
- MX35_PIN_CSI_D9 = _MXC_BUILD_GPIO_PIN(0, 21, 0xE4, 0x528),
- MX35_PIN_CSI_D10 = _MXC_BUILD_GPIO_PIN(0, 22, 0xE8, 0x52C),
- MX35_PIN_CSI_D11 = _MXC_BUILD_GPIO_PIN(0, 23, 0xEC, 0x530),
- MX35_PIN_CSI_D12 = _MXC_BUILD_GPIO_PIN(0, 24, 0xF0, 0x534),
- MX35_PIN_CSI_D13 = _MXC_BUILD_GPIO_PIN(0, 25, 0xF4, 0x538),
- MX35_PIN_CSI_D14 = _MXC_BUILD_GPIO_PIN(0, 26, 0xF8, 0x53C),
- MX35_PIN_CSI_D15 = _MXC_BUILD_GPIO_PIN(0, 27, 0xFC, 0x540),
- MX35_PIN_CSI_MCLK = _MXC_BUILD_GPIO_PIN(0, 28, 0x100, 0x544),
- MX35_PIN_CSI_VSYNC = _MXC_BUILD_GPIO_PIN(0, 29, 0x104, 0x548),
- MX35_PIN_CSI_HSYNC = _MXC_BUILD_GPIO_PIN(0, 30, 0x108, 0x54C),
- MX35_PIN_CSI_PIXCLK = _MXC_BUILD_GPIO_PIN(0, 31, 0x10C, 0x550),
-
- MX35_PIN_I2C1_CLK = _MXC_BUILD_GPIO_PIN(1, 24, 0x110, 0x554),
- MX35_PIN_I2C1_DAT = _MXC_BUILD_GPIO_PIN(1, 25, 0x114, 0x558),
- MX35_PIN_I2C2_CLK = _MXC_BUILD_GPIO_PIN(1, 26, 0x118, 0x55C),
- MX35_PIN_I2C2_DAT = _MXC_BUILD_GPIO_PIN(1, 27, 0x11C, 0x560),
-
- MX35_PIN_STXD4 = _MXC_BUILD_GPIO_PIN(1, 28, 0x120, 0x564),
- MX35_PIN_SRXD4 = _MXC_BUILD_GPIO_PIN(1, 29, 0x124, 0x568),
- MX35_PIN_SCK4 = _MXC_BUILD_GPIO_PIN(1, 30, 0x128, 0x56C),
- MX35_PIN_STXFS4 = _MXC_BUILD_GPIO_PIN(1, 31, 0x12C, 0x570),
- MX35_PIN_STXD5 = _MXC_BUILD_GPIO_PIN(0, 0, 0x130, 0x574),
- MX35_PIN_SRXD5 = _MXC_BUILD_GPIO_PIN(0, 1, 0x134, 0x578),
- MX35_PIN_SCK5 = _MXC_BUILD_GPIO_PIN(0, 2, 0x138, 0x57C),
- MX35_PIN_STXFS5 = _MXC_BUILD_GPIO_PIN(0, 3, 0x13C, 0x580),
-
- MX35_PIN_SCKR = _MXC_BUILD_GPIO_PIN(0, 4, 0x140, 0x584),
- MX35_PIN_FSR = _MXC_BUILD_GPIO_PIN(0, 5, 0x144, 0x588),
- MX35_PIN_HCKR = _MXC_BUILD_GPIO_PIN(0, 6, 0x148, 0x58C),
- MX35_PIN_SCKT = _MXC_BUILD_GPIO_PIN(0, 7, 0x14C, 0x590),
- MX35_PIN_FST = _MXC_BUILD_GPIO_PIN(0, 8, 0x150, 0x594),
- MX35_PIN_HCKT = _MXC_BUILD_GPIO_PIN(0, 9, 0x154, 0x598),
- MX35_PIN_TX5_RX0 = _MXC_BUILD_GPIO_PIN(0, 10, 0x158, 0x59C),
- MX35_PIN_TX4_RX1 = _MXC_BUILD_GPIO_PIN(0, 11, 0x15C, 0x5A0),
- MX35_PIN_TX3_RX2 = _MXC_BUILD_GPIO_PIN(0, 12, 0x160, 0x5A4),
- MX35_PIN_TX2_RX3 = _MXC_BUILD_GPIO_PIN(0, 13, 0x164, 0x5A8),
- MX35_PIN_TX1 = _MXC_BUILD_GPIO_PIN(0, 14, 0x168, 0x5AC),
- MX35_PIN_TX0 = _MXC_BUILD_GPIO_PIN(0, 15, 0x16C, 0x5B0),
-
- MX35_PIN_CSPI1_MOSI = _MXC_BUILD_GPIO_PIN(0, 16, 0x170, 0x5B4),
- MX35_PIN_CSPI1_MISO = _MXC_BUILD_GPIO_PIN(0, 17, 0x174, 0x5B8),
- MX35_PIN_CSPI1_SS0 = _MXC_BUILD_GPIO_PIN(0, 18, 0x178, 0x5BC),
- MX35_PIN_CSPI1_SS1 = _MXC_BUILD_GPIO_PIN(0, 19, 0x17C, 0x5C0),
- MX35_PIN_CSPI1_SCLK = _MXC_BUILD_GPIO_PIN(2, 4, 0x180, 0x5C4),
- MX35_PIN_CSPI1_SPI_RDY = _MXC_BUILD_GPIO_PIN(2, 5, 0x184, 0x5C8),
-
- MX35_PIN_RXD1 = _MXC_BUILD_GPIO_PIN(2, 6, 0x188, 0x5CC),
- MX35_PIN_TXD1 = _MXC_BUILD_GPIO_PIN(2, 7, 0x18C, 0x5D0),
- MX35_PIN_RTS1 = _MXC_BUILD_GPIO_PIN(2, 8, 0x190, 0x5D4),
- MX35_PIN_CTS1 = _MXC_BUILD_GPIO_PIN(2, 9, 0x194, 0x5D8),
- MX35_PIN_RXD2 = _MXC_BUILD_GPIO_PIN(2, 10, 0x198, 0x5DC),
- MX35_PIN_TXD2 = _MXC_BUILD_GPIO_PIN(1, 11, 0x19C, 0x5E0),
- MX35_PIN_RTS2 = _MXC_BUILD_GPIO_PIN(1, 12, 0x1A0, 0x5E4),
- MX35_PIN_CTS2 = _MXC_BUILD_GPIO_PIN(1, 13, 0x1A4, 0x5E8),
-
- MX35_PIN_USBOTG_PWR = _MXC_BUILD_GPIO_PIN(2, 14, 0x1A8, 0x60C),
- MX35_PIN_USBOTG_OC = _MXC_BUILD_GPIO_PIN(2, 15, 0x1AC, 0x610),
-
- MX35_PIN_LD0 = _MXC_BUILD_GPIO_PIN(1, 0, 0x1B0, 0x614),
- MX35_PIN_LD1 = _MXC_BUILD_GPIO_PIN(1, 1, 0x1B4, 0x618),
- MX35_PIN_LD2 = _MXC_BUILD_GPIO_PIN(1, 2, 0x1B8, 0x61C),
- MX35_PIN_LD3 = _MXC_BUILD_GPIO_PIN(1, 3, 0x1BC, 0x620),
- MX35_PIN_LD4 = _MXC_BUILD_GPIO_PIN(1, 4, 0x1C0, 0x624),
- MX35_PIN_LD5 = _MXC_BUILD_GPIO_PIN(1, 5, 0x1C4, 0x628),
- MX35_PIN_LD6 = _MXC_BUILD_GPIO_PIN(1, 6, 0x1C8, 0x62C),
- MX35_PIN_LD7 = _MXC_BUILD_GPIO_PIN(1, 7, 0x1CC, 0x630),
- MX35_PIN_LD8 = _MXC_BUILD_GPIO_PIN(1, 8, 0x1D0, 0x634),
- MX35_PIN_LD9 = _MXC_BUILD_GPIO_PIN(1, 9, 0x1D4, 0x638),
- MX35_PIN_LD10 = _MXC_BUILD_GPIO_PIN(1, 10, 0x1D8, 0x63C),
- MX35_PIN_LD11 = _MXC_BUILD_GPIO_PIN(1, 11, 0x1DC, 0x640),
- MX35_PIN_LD12 = _MXC_BUILD_GPIO_PIN(1, 12, 0x1E0, 0x644),
- MX35_PIN_LD13 = _MXC_BUILD_GPIO_PIN(1, 13, 0x1E4, 0x648),
- MX35_PIN_LD14 = _MXC_BUILD_GPIO_PIN(1, 14, 0x1E8, 0x64C),
- MX35_PIN_LD15 = _MXC_BUILD_GPIO_PIN(1, 15, 0x1EC, 0x650),
- MX35_PIN_LD16 = _MXC_BUILD_GPIO_PIN(1, 16, 0x1F0, 0x654),
- MX35_PIN_LD17 = _MXC_BUILD_GPIO_PIN(1, 17, 0x1F4, 0x658),
- MX35_PIN_LD18 = _MXC_BUILD_GPIO_PIN(2, 24, 0x1F8, 0x65C),
- MX35_PIN_LD19 = _MXC_BUILD_GPIO_PIN(2, 25, 0x1FC, 0x660),
- MX35_PIN_LD20 = _MXC_BUILD_GPIO_PIN(2, 26, 0x200, 0x664),
- MX35_PIN_LD21 = _MXC_BUILD_GPIO_PIN(2, 27, 0x204, 0x668),
- MX35_PIN_LD22 = _MXC_BUILD_GPIO_PIN(2, 28, 0x208, 0x66C),
- MX35_PIN_LD23 = _MXC_BUILD_GPIO_PIN(2, 29, 0x20C, 0x670),
-
- MX35_PIN_D3_HSYNC = _MXC_BUILD_GPIO_PIN(2, 30, 0x210, 0x674),
- MX35_PIN_D3_FPSHIFT = _MXC_BUILD_GPIO_PIN(2, 31, 0x214, 0x678),
- MX35_PIN_D3_DRDY = _MXC_BUILD_GPIO_PIN(0, 0, 0x218, 0x67C),
- MX35_PIN_CONTRAST = _MXC_BUILD_GPIO_PIN(0, 1, 0x21C, 0x680),
- MX35_PIN_D3_VSYNC = _MXC_BUILD_GPIO_PIN(0, 2, 0x220, 0x684),
- MX35_PIN_D3_REV = _MXC_BUILD_GPIO_PIN(0, 3, 0x224, 0x688),
- MX35_PIN_D3_CLS = _MXC_BUILD_GPIO_PIN(0, 4, 0x228, 0x68C),
- MX35_PIN_D3_SPL = _MXC_BUILD_GPIO_PIN(0, 5, 0x22C, 0x690),
-
- MX35_PIN_SD1_CMD = _MXC_BUILD_GPIO_PIN(0, 6, 0x230, 0x694),
- MX35_PIN_SD1_CLK = _MXC_BUILD_GPIO_PIN(0, 7, 0x234, 0x698),
- MX35_PIN_SD1_DATA0 = _MXC_BUILD_GPIO_PIN(0, 8, 0x238, 0x69C),
- MX35_PIN_SD1_DATA1 = _MXC_BUILD_GPIO_PIN(0, 9, 0x23C, 0x6A0),
- MX35_PIN_SD1_DATA2 = _MXC_BUILD_GPIO_PIN(0, 10, 0x240, 0x6A4),
- MX35_PIN_SD1_DATA3 = _MXC_BUILD_GPIO_PIN(0, 11, 0x244, 0x6A8),
- MX35_PIN_SD2_CMD = _MXC_BUILD_GPIO_PIN(1, 0, 0x248, 0x6AC),
- MX35_PIN_SD2_CLK = _MXC_BUILD_GPIO_PIN(1, 1, 0x24C, 0x6B0),
- MX35_PIN_SD2_DATA0 = _MXC_BUILD_GPIO_PIN(1, 2, 0x250, 0x6B4),
- MX35_PIN_SD2_DATA1 = _MXC_BUILD_GPIO_PIN(1, 3, 0x254, 0x6B8),
- MX35_PIN_SD2_DATA2 = _MXC_BUILD_GPIO_PIN(1, 4, 0x258, 0x6BC),
- MX35_PIN_SD2_DATA3 = _MXC_BUILD_GPIO_PIN(1, 5, 0x25C, 0x6C0),
-
- MX35_PIN_ATA_CS0 = _MXC_BUILD_GPIO_PIN(1, 6, 0x260, 0x6C4),
- MX35_PIN_ATA_CS1 = _MXC_BUILD_GPIO_PIN(1, 7, 0x264, 0x6C8),
- MX35_PIN_ATA_DIOR = _MXC_BUILD_GPIO_PIN(1, 8, 0x268, 0x6CC),
- MX35_PIN_ATA_DIOW = _MXC_BUILD_GPIO_PIN(1, 9, 0x26C, 0x6D0),
- MX35_PIN_ATA_DMACK = _MXC_BUILD_GPIO_PIN(1, 10, 0x270, 0x6D4),
- MX35_PIN_ATA_RESET_B = _MXC_BUILD_GPIO_PIN(1, 11, 0x274, 0x6D8),
- MX35_PIN_ATA_IORDY = _MXC_BUILD_GPIO_PIN(1, 12, 0x278, 0x6DC),
- MX35_PIN_ATA_DATA0 = _MXC_BUILD_GPIO_PIN(1, 13, 0x27C, 0x6E0),
- MX35_PIN_ATA_DATA1 = _MXC_BUILD_GPIO_PIN(1, 14, 0x280, 0x6E4),
- MX35_PIN_ATA_DATA2 = _MXC_BUILD_GPIO_PIN(1, 15, 0x284, 0x6E8),
- MX35_PIN_ATA_DATA3 = _MXC_BUILD_GPIO_PIN(1, 16, 0x288, 0x6EC),
- MX35_PIN_ATA_DATA4 = _MXC_BUILD_GPIO_PIN(1, 17, 0x28C, 0x6F0),
- MX35_PIN_ATA_DATA5 = _MXC_BUILD_GPIO_PIN(1, 18, 0x290, 0x6F4),
- MX35_PIN_ATA_DATA6 = _MXC_BUILD_GPIO_PIN(1, 19, 0x294, 0x6F8),
- MX35_PIN_ATA_DATA7 = _MXC_BUILD_GPIO_PIN(1, 20, 0x298, 0x6FC),
- MX35_PIN_ATA_DATA8 = _MXC_BUILD_GPIO_PIN(1, 21, 0x29C, 0x700),
- MX35_PIN_ATA_DATA9 = _MXC_BUILD_GPIO_PIN(1, 22, 0x2A0, 0x704),
- MX35_PIN_ATA_DATA10 = _MXC_BUILD_GPIO_PIN(1, 23, 0x2A4, 0x708),
- MX35_PIN_ATA_DATA11 = _MXC_BUILD_GPIO_PIN(1, 24, 0x2A8, 0x70C),
- MX35_PIN_ATA_DATA12 = _MXC_BUILD_GPIO_PIN(1, 25, 0x2AC, 0x710),
- MX35_PIN_ATA_DATA13 = _MXC_BUILD_GPIO_PIN(1, 26, 0x2B0, 0x714),
- MX35_PIN_ATA_DATA14 = _MXC_BUILD_GPIO_PIN(1, 27, 0x2B4, 0x718),
- MX35_PIN_ATA_DATA15 = _MXC_BUILD_GPIO_PIN(1, 28, 0x2B8, 0x71C),
- MX35_PIN_ATA_INTRQ = _MXC_BUILD_GPIO_PIN(1, 29, 0x2BC, 0x720),
- MX35_PIN_ATA_BUFF_EN = _MXC_BUILD_GPIO_PIN(1, 30, 0x2C0, 0x724),
- MX35_PIN_ATA_DMARQ = _MXC_BUILD_GPIO_PIN(1, 31, 0x2C4, 0x728),
- MX35_PIN_ATA_DA0 = _MXC_BUILD_GPIO_PIN(2, 0, 0x2C8, 0x72C),
- MX35_PIN_ATA_DA1 = _MXC_BUILD_GPIO_PIN(2, 1, 0x2CC, 0x730),
- MX35_PIN_ATA_DA2 = _MXC_BUILD_GPIO_PIN(2, 2, 0x2D0, 0x734),
-
- MX35_PIN_MLB_CLK = _MXC_BUILD_GPIO_PIN(2, 3, 0x2D4, 0x738),
- MX35_PIN_MLB_DAT = _MXC_BUILD_GPIO_PIN(2, 4, 0x2D8, 0x73C),
- MX35_PIN_MLB_SIG = _MXC_BUILD_GPIO_PIN(2, 5, 0x2DC, 0x740),
-
- MX35_PIN_FEC_TX_CLK = _MXC_BUILD_GPIO_PIN(2, 6, 0x2E0, 0x744),
- MX35_PIN_FEC_RX_CLK = _MXC_BUILD_GPIO_PIN(2, 7, 0x2E4, 0x748),
- MX35_PIN_FEC_RX_DV = _MXC_BUILD_GPIO_PIN(2, 8, 0x2E8, 0x74C),
- MX35_PIN_FEC_COL = _MXC_BUILD_GPIO_PIN(2, 9, 0x2EC, 0x750),
- MX35_PIN_FEC_RDATA0 = _MXC_BUILD_GPIO_PIN(2, 10, 0x2F0, 0x754),
- MX35_PIN_FEC_TDATA0 = _MXC_BUILD_GPIO_PIN(2, 11, 0x2F4, 0x758),
- MX35_PIN_FEC_TX_EN = _MXC_BUILD_GPIO_PIN(2, 12, 0x2F8, 0x75C),
- MX35_PIN_FEC_MDC = _MXC_BUILD_GPIO_PIN(2, 13, 0x2FC, 0x760),
- MX35_PIN_FEC_MDIO = _MXC_BUILD_GPIO_PIN(2, 14, 0x300, 0x764),
- MX35_PIN_FEC_TX_ERR = _MXC_BUILD_GPIO_PIN(2, 15, 0x304, 0x768),
- MX35_PIN_FEC_RX_ERR = _MXC_BUILD_GPIO_PIN(2, 16, 0x308, 0x76C),
- MX35_PIN_FEC_CRS = _MXC_BUILD_GPIO_PIN(2, 17, 0x30C, 0x770),
- MX35_PIN_FEC_RDATA1 = _MXC_BUILD_GPIO_PIN(2, 18, 0x310, 0x774),
- MX35_PIN_FEC_TDATA1 = _MXC_BUILD_GPIO_PIN(2, 19, 0x314, 0x778),
- MX35_PIN_FEC_RDATA2 = _MXC_BUILD_GPIO_PIN(2, 20, 0x318, 0x77C),
- MX35_PIN_FEC_TDATA2 = _MXC_BUILD_GPIO_PIN(2, 21, 0x31C, 0x780),
- MX35_PIN_FEC_RDATA3 = _MXC_BUILD_GPIO_PIN(2, 22, 0x320, 0x784),
- MX35_PIN_FEC_TDATA3 = _MXC_BUILD_GPIO_PIN(2, 23, 0x324, 0x788),
-} iomux_pin_name_t;
-
-#endif
-#endif
diff --git a/arch/arm/include/asm/arch-mx5/clock.h b/arch/arm/include/asm/arch-mx5/clock.h
index 9cdfb48..6910192 100644
--- a/arch/arm/include/asm/arch-mx5/clock.h
+++ b/arch/arm/include/asm/arch-mx5/clock.h
@@ -68,5 +68,6 @@
void enable_usboh3_clk(unsigned char enable);
void mxc_set_sata_internal_clock(void);
int enable_i2c_clk(unsigned char enable, unsigned i2c_num);
+void enable_nfc_clk(unsigned char enable);
#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h
index a71cc13..8984e42 100644
--- a/arch/arm/include/asm/arch-mx5/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx5/imx-regs.h
@@ -267,6 +267,8 @@
/* M4IF */
#define M4IF_FBPM0 0x40
#define M4IF_FIDBP 0x48
+#define M4IF_GENP_WEIM_MM_MASK 0x00000001
+#define WEIM_GCR2_MUX16_BYP_GRANT_MASK 0x00001000
/* Assuming 24MHz input clock with doubler ON */
/* MFI PDF */
@@ -499,7 +501,7 @@
u32 sdat;
u32 prev;
u32 srev;
- u32 preg_p;
+ u32 prg_p;
u32 scs0;
u32 scs1;
u32 scs2;
@@ -508,12 +510,22 @@
struct fuse_bank {
u32 fuse_regs[0x20];
u32 fuse_rsvd[0xe0];
+#if defined(CONFIG_MX51)
} bank[4];
+#elif defined(CONFIG_MX53)
+ } bank[5];
+#endif
};
struct fuse_bank0_regs {
- u32 fuse0_23[24];
+ u32 fuse0_7[8];
+ u32 uid[8];
+ u32 fuse16_23[8];
+#if defined(CONFIG_MX51)
+ u32 imei[8];
+#elif defined(CONFIG_MX53)
u32 gp[8];
+#endif
};
struct fuse_bank1_regs {
@@ -522,6 +534,14 @@
u32 fuse15_31[0x11];
};
+#if defined(CONFIG_MX53)
+struct fuse_bank4_regs {
+ u32 fuse0_4[5];
+ u32 gp[3];
+ u32 fuse8_31[0x18];
+};
+#endif
+
#endif /* __ASSEMBLER__*/
#endif /* __ASM_ARCH_MX5_IMX_REGS_H__ */
diff --git a/arch/arm/include/asm/arch-mx5/iomux-mx51.h b/arch/arm/include/asm/arch-mx5/iomux-mx51.h
index 4f37295..70aaa37 100644
--- a/arch/arm/include/asm/arch-mx5/iomux-mx51.h
+++ b/arch/arm/include/asm/arch-mx5/iomux-mx51.h
@@ -21,29 +21,8 @@
#include <asm/imx-common/iomux-v3.h>
-#define PAD_CTL_DVS (1 << 13)
-#define PAD_CTL_INPUT_DDR (1 << 9)
-#define PAD_CTL_HYS (1 << 8)
-
-#define PAD_CTL_PKE (1 << 7)
-#define PAD_CTL_PUE (1 << 6 | PAD_CTL_PKE)
-#define PAD_CTL_PUS_100K_DOWN (0 << 4 | PAD_CTL_PUE)
-#define PAD_CTL_PUS_47K_UP (1 << 4 | PAD_CTL_PUE)
-#define PAD_CTL_PUS_100K_UP (2 << 4 | PAD_CTL_PUE)
-#define PAD_CTL_PUS_22K_UP (3 << 4 | PAD_CTL_PUE)
-
-#define PAD_CTL_ODE (1 << 3)
-
-#define PAD_CTL_DSE_LOW (0 << 1)
-#define PAD_CTL_DSE_MED (1 << 1)
-#define PAD_CTL_DSE_HIGH (2 << 1)
-#define PAD_CTL_DSE_MAX (3 << 1)
-
-#define PAD_CTL_SRE_FAST (1 << 0)
-#define PAD_CTL_SRE_SLOW (0 << 0)
-
/* Pad control groupings */
-#define MX51_UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH | \
+#define MX51_UART_PAD_CTRL (PAD_CTL_PUS_100K_DOWN | PAD_CTL_DSE_HIGH | \
PAD_CTL_HYS | PAD_CTL_SRE_FAST)
#define MX51_I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_ODE | \
PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \
@@ -51,17 +30,17 @@
#define MX51_ESDHC_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_ODE | \
PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \
PAD_CTL_HYS)
-#define MX51_USBH1_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_SRE_FAST | \
- PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \
- PAD_CTL_HYS | PAD_CTL_PUE)
+#define MX51_USBH_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_HYS)
#define MX51_ECSPI_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_HYS | \
PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST)
-#define MX51_SDHCI_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \
- PAD_CTL_PUS_47K_UP | PAD_CTL_PUE | \
+#define MX51_SDHCI_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PUS_47K_UP | \
PAD_CTL_SRE_FAST | PAD_CTL_DVS)
#define MX51_GPIO_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PKE | PAD_CTL_SRE_FAST)
-#define __NA_ 0x000
+#define MX51_PAD_CTRL_2 (PAD_CTL_PKE | PAD_CTL_HYS)
+#define MX51_PAD_CTRL_4 (PAD_CTL_PKE | PAD_CTL_DVS | PAD_CTL_HYS)
+#define MX51_PAD_CTRL_5 (PAD_CTL_DVS | PAD_CTL_DSE_HIGH)
/*
* The naming convention for the pad modes is MX51_PAD_<padname>__<padmode>
@@ -69,26 +48,57 @@
* See also iomux-v3.h
*/
-/* PAD MUX ALT INPSE PATH PADCTRL */
+/* PAD MUX ALT INPSE PATH PADCTRL */
enum {
- MX51_PAD_EIM_D16__USBH2_DATA0 = IOMUX_PAD(0x3f0, 0x05c, 2, __NA_, 0, NO_PAD_CTRL),
- MX51_PAD_EIM_D17__USBH2_DATA1 = IOMUX_PAD(0x3f4, 0x060, 2, __NA_, 0, NO_PAD_CTRL),
- MX51_PAD_EIM_D18__USBH2_DATA2 = IOMUX_PAD(0x3f8, 0x064, 2, __NA_, 0, NO_PAD_CTRL),
- MX51_PAD_EIM_D19__USBH2_DATA3 = IOMUX_PAD(0x3fc, 0x068, 2, __NA_, 0, NO_PAD_CTRL),
- MX51_PAD_EIM_D20__USBH2_DATA4 = IOMUX_PAD(0x400, 0x06c, 2, __NA_, 0, NO_PAD_CTRL),
- MX51_PAD_EIM_D21__USBH2_DATA5 = IOMUX_PAD(0x404, 0x070, 2, __NA_, 0, NO_PAD_CTRL),
- MX51_PAD_EIM_D22__USBH2_DATA6 = IOMUX_PAD(0x408, 0x074, 2, __NA_, 0, NO_PAD_CTRL),
- MX51_PAD_EIM_D23__USBH2_DATA7 = IOMUX_PAD(0x40c, 0x078, 2, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_EIM_D16__USBH2_DATA0 = IOMUX_PAD(0x3f0, 0x05c, 2, __NA_, 0, MX51_USBH_PAD_CTRL),
+ MX51_PAD_EIM_D17__GPIO2_1 = IOMUX_PAD(0x3f4, 0x060, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
+ MX51_PAD_EIM_D17__USBH2_DATA1 = IOMUX_PAD(0x3f4, 0x060, 2, __NA_, 0, MX51_USBH_PAD_CTRL),
+ MX51_PAD_EIM_D18__USBH2_DATA2 = IOMUX_PAD(0x3f8, 0x064, 2, __NA_, 0, MX51_USBH_PAD_CTRL),
+ MX51_PAD_EIM_D19__USBH2_DATA3 = IOMUX_PAD(0x3fc, 0x068, 2, __NA_, 0, MX51_USBH_PAD_CTRL),
+ MX51_PAD_EIM_D20__USBH2_DATA4 = IOMUX_PAD(0x400, 0x06c, 2, __NA_, 0, MX51_USBH_PAD_CTRL),
+ MX51_PAD_EIM_D21__GPIO2_5 = IOMUX_PAD(0x404, 0x070, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
+ MX51_PAD_EIM_D21__USBH2_DATA5 = IOMUX_PAD(0x404, 0x070, 2, __NA_, 0, MX51_USBH_PAD_CTRL),
+ MX51_PAD_EIM_D22__USBH2_DATA6 = IOMUX_PAD(0x408, 0x074, 2, __NA_, 0, MX51_USBH_PAD_CTRL),
+ MX51_PAD_EIM_D23__USBH2_DATA7 = IOMUX_PAD(0x40c, 0x078, 2, __NA_, 0, MX51_USBH_PAD_CTRL),
+ MX51_PAD_EIM_D25__UART3_RXD = IOMUX_PAD(0x414, 0x080, 3, 0x9f4, 0, MX51_UART_PAD_CTRL),
+ MX51_PAD_EIM_D26__UART3_TXD = IOMUX_PAD(0x418, 0x084, 3, __NA_, 0, MX51_UART_PAD_CTRL),
MX51_PAD_EIM_D27__GPIO2_9 = IOMUX_PAD(0x41c, 0x088, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
- MX51_PAD_EIM_A24__USBH2_CLK = IOMUX_PAD(0x450, 0x0bc, 2, __NA_, 0, NO_PAD_CTRL),
- MX51_PAD_EIM_A25__USBH2_DIR = IOMUX_PAD(0x454, 0x0c0, 2, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_EIM_A16__GPIO2_10 = IOMUX_PAD(0x430, 0x09c, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
+ MX51_PAD_EIM_A17__GPIO2_11 = IOMUX_PAD(0x434, 0x0a0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
+ MX51_PAD_EIM_A20__GPIO2_14 = IOMUX_PAD(0x440, 0x0ac, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
+ MX51_PAD_EIM_A22__GPIO2_16 = IOMUX_PAD(0x448, 0x0b4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
+ MX51_PAD_EIM_A24__USBH2_CLK = IOMUX_PAD(0x450, 0x0bc, 2, __NA_, 0, MX51_USBH_PAD_CTRL),
+ MX51_PAD_EIM_A25__USBH2_DIR = IOMUX_PAD(0x454, 0x0c0, 2, __NA_, 0, MX51_USBH_PAD_CTRL),
MX51_PAD_EIM_A26__GPIO2_20 = IOMUX_PAD(0x458, 0x0c4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
- MX51_PAD_EIM_A26__USBH2_STP = IOMUX_PAD(0x458, 0x0c4, 2, __NA_, 0, NO_PAD_CTRL),
- MX51_PAD_EIM_A27__USBH2_NXT = IOMUX_PAD(0x45c, 0x0c8, 2, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_EIM_A26__USBH2_STP = IOMUX_PAD(0x458, 0x0c4, 2, __NA_, 0, MX51_USBH_PAD_CTRL),
+ MX51_PAD_EIM_A27__USBH2_NXT = IOMUX_PAD(0x45c, 0x0c8, 2, __NA_, 0, MX51_USBH_PAD_CTRL),
+ MX51_PAD_EIM_EB2__FEC_MDIO = IOMUX_PAD(0x468, 0x0d4, 3, 0x954, 0, PAD_CTL_PUS_22K_UP | PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_HYS),
+ MX51_PAD_EIM_EB3__FEC_RDATA1 = IOMUX_PAD(0x46c, 0x0d8, 3, 0x95c, 0, NO_PAD_CTRL),
+ MX51_PAD_EIM_EB3__GPIO2_23 = IOMUX_PAD(0x46c, 0x0d8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
MX51_PAD_EIM_CS0__GPIO2_25 = IOMUX_PAD(0x474, 0x0e0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
- MX51_PAD_EIM_CS2__SD1_CD = IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_ESDHC_PAD_CTRL),
+ MX51_PAD_EIM_CS2__FEC_RDATA2 = IOMUX_PAD(0x47c, 0x0e8, 3, 0x960, 0, NO_PAD_CTRL),
+ MX51_PAD_EIM_CS2__GPIO2_27 = IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
+ MX51_PAD_EIM_CS3__FEC_RDATA3 = IOMUX_PAD(0x480, 0x0ec, 3, 0x964, 0, NO_PAD_CTRL),
MX51_PAD_EIM_CS3__GPIO2_28 = IOMUX_PAD(0x480, 0x0ec, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
+ MX51_PAD_EIM_CS4__FEC_RX_ER = IOMUX_PAD(0x484, 0x0f0, 3, 0x970, 0, MX51_PAD_CTRL_2),
MX51_PAD_EIM_CS4__GPIO2_29 = IOMUX_PAD(0x484, 0x0f0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
+ MX51_PAD_EIM_CS5__FEC_CRS = IOMUX_PAD(0x488, 0x0f4, 3, 0x950, 0, MX51_PAD_CTRL_2),
+ MX51_PAD_DRAM_RAS__DRAM_RAS = IOMUX_PAD(0x4a4, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_DRAM_CAS__DRAM_CAS = IOMUX_PAD(0x4a8, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_DRAM_SDWE__DRAM_SDWE = IOMUX_PAD(0x4ac, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_DRAM_SDCKE0__DRAM_SDCKE0 = IOMUX_PAD(0x4b0, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_DRAM_SDCKE1__DRAM_SDCKE1 = IOMUX_PAD(0x4b4, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_DRAM_SDCLK__DRAM_SDCLK = IOMUX_PAD(0x4b8, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_DRAM_SDQS0__DRAM_SDQS0 = IOMUX_PAD(0x4bc, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_DRAM_SDQS1__DRAM_SDQS1 = IOMUX_PAD(0x4c0, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_DRAM_SDQS2__DRAM_SDQS2 = IOMUX_PAD(0x4c4, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_DRAM_SDQS3__DRAM_SDQS3 = IOMUX_PAD(0x4c8, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_DRAM_CS0__DRAM_CS0 = IOMUX_PAD(0x4cc, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_DRAM_CS1__DRAM_CS1 = IOMUX_PAD(0x4d0, 0x104, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_DRAM_DQM0__DRAM_DQM0 = IOMUX_PAD(0x4d4, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_DRAM_DQM1__DRAM_DQM1 = IOMUX_PAD(0x4d8, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_DRAM_DQM2__DRAM_DQM2 = IOMUX_PAD(0x4dc, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_DRAM_DQM3__DRAM_DQM3 = IOMUX_PAD(0x4e0, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
MX51_PAD_NANDF_WE_B__PATA_DIOW = IOMUX_PAD(0x4e4, 0x108, 1, __NA_, 0, NO_PAD_CTRL),
MX51_PAD_NANDF_RE_B__PATA_DIOR = IOMUX_PAD(0x4e8, 0x10c, 1, __NA_, 0, NO_PAD_CTRL),
MX51_PAD_NANDF_ALE__PATA_BUFFER_EN = IOMUX_PAD(0x4ec, 0x110, 1, __NA_, 0, NO_PAD_CTRL),
@@ -96,19 +106,38 @@
MX51_PAD_NANDF_WP_B__PATA_DMACK = IOMUX_PAD(0x4f4, 0x118, 1, __NA_, 0, NO_PAD_CTRL),
MX51_PAD_NANDF_RB0__PATA_DMARQ = IOMUX_PAD(0x4f8, 0x11c, 1, __NA_, 0, NO_PAD_CTRL),
MX51_PAD_NANDF_RB1__PATA_IORDY = IOMUX_PAD(0x4fc, 0x120, 1, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_NANDF_RB2__FEC_COL = IOMUX_PAD(0x500, 0x124, 1, 0x94c, 0, MX51_PAD_CTRL_2),
+ MX51_PAD_NANDF_RB2__GPIO3_10 = IOMUX_PAD(0x500, 0x124, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
+ MX51_PAD_NANDF_RB3__FEC_RX_CLK = IOMUX_PAD(0x504, 0x128, 1, 0x968, 0, MX51_PAD_CTRL_2),
+ MX51_PAD_NANDF_RB3__GPIO3_11 = IOMUX_PAD(0x504, 0x128, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
MX51_PAD_GPIO_NAND__PATA_INTRQ = IOMUX_PAD(0x514, 0x12c, 1, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_NANDF_CS2__FEC_TX_ER = IOMUX_PAD(0x520, 0x138, 2, __NA_, 0, MX51_PAD_CTRL_5),
MX51_PAD_NANDF_CS2__PATA_CS_0 = IOMUX_PAD(0x520, 0x138, 1, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_NANDF_CS3__FEC_MDC = IOMUX_PAD(0x524, 0x13c, 2, __NA_, 0, MX51_PAD_CTRL_5),
MX51_PAD_NANDF_CS3__PATA_CS_1 = IOMUX_PAD(0x524, 0x13c, 1, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_NANDF_CS4__FEC_TDATA1 = IOMUX_PAD(0x528, 0x140, 2, __NA_, 0, MX51_PAD_CTRL_5),
MX51_PAD_NANDF_CS4__PATA_DA_0 = IOMUX_PAD(0x528, 0x140, 1, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_NANDF_CS5__FEC_TDATA2 = IOMUX_PAD(0x52c, 0x144, 2, __NA_, 0, MX51_PAD_CTRL_5),
MX51_PAD_NANDF_CS5__PATA_DA_1 = IOMUX_PAD(0x52c, 0x144, 1, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_NANDF_CS6__FEC_TDATA3 = IOMUX_PAD(0x530, 0x148, 2, __NA_, 0, MX51_PAD_CTRL_5),
MX51_PAD_NANDF_CS6__PATA_DA_2 = IOMUX_PAD(0x530, 0x148, 1, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_NANDF_CS7__FEC_TX_EN = IOMUX_PAD(0x534, 0x14c, 1, __NA_, 0, MX51_PAD_CTRL_5),
+ MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK = IOMUX_PAD(0x538, 0x150, 1, 0x974, 0, MX51_PAD_CTRL_4),
+ MX51_PAD_NANDF_D15__GPIO3_25 = IOMUX_PAD(0x53c, 0x154, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
MX51_PAD_NANDF_D15__PATA_DATA15 = IOMUX_PAD(0x53c, 0x154, 1, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_NANDF_D14__GPIO3_26 = IOMUX_PAD(0x540, 0x158, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
MX51_PAD_NANDF_D14__PATA_DATA14 = IOMUX_PAD(0x540, 0x158, 1, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_NANDF_D13__GPIO3_27 = IOMUX_PAD(0x544, 0x15c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
MX51_PAD_NANDF_D13__PATA_DATA13 = IOMUX_PAD(0x544, 0x15c, 1, __NA_, 0, NO_PAD_CTRL),
MX51_PAD_NANDF_D12__PATA_DATA12 = IOMUX_PAD(0x548, 0x160, 1, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_NANDF_D11__FEC_RX_DV = IOMUX_PAD(0x54c, 0x164, 2, 0x96c, 0, NO_PAD_CTRL),
MX51_PAD_NANDF_D11__PATA_DATA11 = IOMUX_PAD(0x54c, 0x164, 1, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_NANDF_D10__GPIO3_30 = IOMUX_PAD(0x550, 0x168, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
MX51_PAD_NANDF_D10__PATA_DATA10 = IOMUX_PAD(0x550, 0x168, 1, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_NANDF_D9__FEC_RDATA0 = IOMUX_PAD(0x554, 0x16c, 0x12, 0x958, 0, MX51_PAD_CTRL_4),
+ MX51_PAD_NANDF_D9__GPIO3_31 = IOMUX_PAD(0x554, 0x16c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
MX51_PAD_NANDF_D9__PATA_DATA9 = IOMUX_PAD(0x554, 0x16c, 1, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_NANDF_D8__FEC_TDATA0 = IOMUX_PAD(0x558, 0x170, 2, __NA_, 0, MX51_PAD_CTRL_5),
MX51_PAD_NANDF_D8__PATA_DATA8 = IOMUX_PAD(0x558, 0x170, 1, __NA_, 0, NO_PAD_CTRL),
MX51_PAD_NANDF_D7__PATA_DATA7 = IOMUX_PAD(0x55c, 0x174, 1, __NA_, 0, NO_PAD_CTRL),
MX51_PAD_NANDF_D6__PATA_DATA6 = IOMUX_PAD(0x560, 0x178, 1, __NA_, 0, NO_PAD_CTRL),
@@ -118,34 +147,52 @@
MX51_PAD_NANDF_D2__PATA_DATA2 = IOMUX_PAD(0x570, 0x188, 1, __NA_, 0, NO_PAD_CTRL),
MX51_PAD_NANDF_D1__PATA_DATA1 = IOMUX_PAD(0x574, 0x18c, 1, __NA_, 0, NO_PAD_CTRL),
MX51_PAD_NANDF_D0__PATA_DATA0 = IOMUX_PAD(0x578, 0x190, 1, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_CSI2_D12__GPIO4_9 = IOMUX_PAD(0x5bc, 0x1cc, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
+ MX51_PAD_CSI2_D13__GPIO4_10 = IOMUX_PAD(0x5c0, 0x1d0, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI = IOMUX_PAD(0x600, 0x210, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL),
MX51_PAD_CSPI1_MISO__ECSPI1_MISO = IOMUX_PAD(0x604, 0x214, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL),
+ MX51_PAD_CSPI1_SS0__ECSPI1_SS0 = IOMUX_PAD(0x608, 0x218, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL),
MX51_PAD_CSPI1_SS0__GPIO4_24 = IOMUX_PAD(0x608, 0x218, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
+ MX51_PAD_CSPI1_SS1__ECSPI1_SS1 = IOMUX_PAD(0x60c, 0x21c, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL),
MX51_PAD_CSPI1_SS1__GPIO4_25 = IOMUX_PAD(0x60c, 0x21c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
+ MX51_PAD_CSPI1_RDY__ECSPI1_RDY = IOMUX_PAD(0x610, 0x220, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL),
+ MX51_PAD_CSPI1_RDY__GPIO4_26 = IOMUX_PAD(0x610, 0x220, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK = IOMUX_PAD(0x614, 0x224, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL),
MX51_PAD_UART1_RXD__UART1_RXD = IOMUX_PAD(0x618, 0x228, 0, 0x9e4, 0, MX51_UART_PAD_CTRL),
MX51_PAD_UART1_TXD__UART1_TXD = IOMUX_PAD(0x61c, 0x22c, 0, __NA_, 0, MX51_UART_PAD_CTRL),
MX51_PAD_UART1_RTS__UART1_RTS = IOMUX_PAD(0x620, 0x230, 0, 0x9e0, 0, MX51_UART_PAD_CTRL),
MX51_PAD_UART1_CTS__UART1_CTS = IOMUX_PAD(0x624, 0x234, 0, __NA_, 0, MX51_UART_PAD_CTRL),
- MX51_PAD_USBH1_CLK__USBH1_CLK = IOMUX_PAD(0x678, 0x278, 0, __NA_, 0, MX51_USBH1_PAD_CTRL),
- MX51_PAD_USBH1_DIR__USBH1_DIR = IOMUX_PAD(0x67c, 0x27c, 0, __NA_, 0, MX51_USBH1_PAD_CTRL),
- MX51_PAD_USBH1_STP__USBH1_STP = IOMUX_PAD(0x680, 0x280, 0, __NA_, 0, MX51_USBH1_PAD_CTRL),
+ MX51_PAD_USBH1_CLK__USBH1_CLK = IOMUX_PAD(0x678, 0x278, 0, __NA_, 0, MX51_USBH_PAD_CTRL),
+ MX51_PAD_USBH1_DIR__USBH1_DIR = IOMUX_PAD(0x67c, 0x27c, 0, __NA_, 0, MX51_USBH_PAD_CTRL),
MX51_PAD_USBH1_STP__GPIO1_27 = IOMUX_PAD(0x680, 0x280, 2, __NA_, 0, MX51_GPIO_PAD_CTRL),
- MX51_PAD_USBH1_NXT__USBH1_NXT = IOMUX_PAD(0x684, 0x284, 0, __NA_, 0, MX51_USBH1_PAD_CTRL),
- MX51_PAD_USBH1_DATA0__USBH1_DATA0 = IOMUX_PAD(0x688, 0x288, 0, __NA_, 0, MX51_USBH1_PAD_CTRL),
- MX51_PAD_USBH1_DATA1__USBH1_DATA1 = IOMUX_PAD(0x68c, 0x28c, 0, __NA_, 0, MX51_USBH1_PAD_CTRL),
- MX51_PAD_USBH1_DATA2__USBH1_DATA2 = IOMUX_PAD(0x690, 0x290, 0, __NA_, 0, MX51_USBH1_PAD_CTRL),
- MX51_PAD_USBH1_DATA3__USBH1_DATA3 = IOMUX_PAD(0x694, 0x294, 0, __NA_, 0, MX51_USBH1_PAD_CTRL),
- MX51_PAD_USBH1_DATA4__USBH1_DATA4 = IOMUX_PAD(0x698, 0x298, 0, __NA_, 0, MX51_USBH1_PAD_CTRL),
- MX51_PAD_USBH1_DATA5__USBH1_DATA5 = IOMUX_PAD(0x69c, 0x29c, 0, __NA_, 0, MX51_USBH1_PAD_CTRL),
- MX51_PAD_USBH1_DATA6__USBH1_DATA6 = IOMUX_PAD(0x6a0, 0x2a0, 0, __NA_, 0, MX51_USBH1_PAD_CTRL),
- MX51_PAD_USBH1_DATA7__USBH1_DATA7 = IOMUX_PAD(0x6a4, 0x2a4, 0, __NA_, 0, MX51_USBH1_PAD_CTRL),
+ MX51_PAD_USBH1_STP__USBH1_STP = IOMUX_PAD(0x680, 0x280, 0, __NA_, 0, MX51_USBH_PAD_CTRL),
+ MX51_PAD_USBH1_NXT__USBH1_NXT = IOMUX_PAD(0x684, 0x284, 0, __NA_, 0, MX51_USBH_PAD_CTRL),
+ MX51_PAD_USBH1_DATA0__USBH1_DATA0 = IOMUX_PAD(0x688, 0x288, 0, __NA_, 0, MX51_USBH_PAD_CTRL),
+ MX51_PAD_USBH1_DATA1__USBH1_DATA1 = IOMUX_PAD(0x68c, 0x28c, 0, __NA_, 0, MX51_USBH_PAD_CTRL),
+ MX51_PAD_USBH1_DATA2__USBH1_DATA2 = IOMUX_PAD(0x690, 0x290, 0, __NA_, 0, MX51_USBH_PAD_CTRL),
+ MX51_PAD_USBH1_DATA3__USBH1_DATA3 = IOMUX_PAD(0x694, 0x294, 0, __NA_, 0, MX51_USBH_PAD_CTRL),
+ MX51_PAD_USBH1_DATA4__USBH1_DATA4 = IOMUX_PAD(0x698, 0x298, 0, __NA_, 0, MX51_USBH_PAD_CTRL),
+ MX51_PAD_USBH1_DATA5__USBH1_DATA5 = IOMUX_PAD(0x69c, 0x29c, 0, __NA_, 0, MX51_USBH_PAD_CTRL),
+ MX51_PAD_USBH1_DATA6__USBH1_DATA6 = IOMUX_PAD(0x6a0, 0x2a0, 0, __NA_, 0, MX51_USBH_PAD_CTRL),
+ MX51_PAD_USBH1_DATA7__USBH1_DATA7 = IOMUX_PAD(0x6a4, 0x2a4, 0, __NA_, 0, MX51_USBH_PAD_CTRL),
+ MX51_PAD_DI1_PIN11__ECSPI1_SS2 = IOMUX_PAD(0x6a8, 0x2a8, 7, __NA_, 0, MX51_ECSPI_PAD_CTRL),
+ MX51_PAD_DI1_PIN12__GPIO3_1 = IOMUX_PAD(0x6ac, 0x2ac, 4, 0x978, 1, MX51_GPIO_PAD_CTRL),
+ MX51_PAD_DI1_PIN13__GPIO3_2 = IOMUX_PAD(0x6b0, 0x2b0, 4, 0x97c, 1, MX51_GPIO_PAD_CTRL),
+ MX51_PAD_DI1_D0_CS__GPIO3_3 = IOMUX_PAD(0x6b4, 0x2b4, 4, 0x980, 1, MX51_GPIO_PAD_CTRL),
+ MX51_PAD_DI1_D1_CS__GPIO3_4 = IOMUX_PAD(0x6b8, 0x2b8, 4, 0x984, 1, MX51_GPIO_PAD_CTRL),
+ MX51_PAD_DISPB2_SER_DIN__GPIO3_5 = IOMUX_PAD(0x6bc, 0x2bc, 4, 0x988, 1, MX51_GPIO_PAD_CTRL),
+ MX51_PAD_DISPB2_SER_DIO__GPIO3_6 = IOMUX_PAD(0x6c0, 0x2c0, 4, 0x98c, 1, MX51_GPIO_PAD_CTRL),
+ MX51_PAD_DI1_PIN3__DI1_PIN3 = IOMUX_PAD(0x72c, 0x32c, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_DI1_PIN2__DI1_PIN2 = IOMUX_PAD(0x734, 0x330, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK = IOMUX_PAD(0x754, 0x34c, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_DI_GP4__DI2_PIN15 = IOMUX_PAD(0x758, 0x350, 4, __NA_, 0, NO_PAD_CTRL),
MX51_PAD_SD1_CMD__SD1_CMD = IOMUX_PAD(0x79c, 0x394, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL),
MX51_PAD_SD1_CLK__SD1_CLK = IOMUX_PAD(0x7a0, 0x398, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS),
MX51_PAD_SD1_DATA0__SD1_DATA0 = IOMUX_PAD(0x7a4, 0x39c, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL),
MX51_PAD_SD1_DATA1__SD1_DATA1 = IOMUX_PAD(0x7a8, 0x3a0, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL),
MX51_PAD_SD1_DATA2__SD1_DATA2 = IOMUX_PAD(0x7ac, 0x3a4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL),
MX51_PAD_SD1_DATA3__SD1_DATA3 = IOMUX_PAD(0x7b0, 0x3a8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL),
+ MX51_PAD_GPIO1_0__GPIO1_0 = IOMUX_PAD(0x7b4, 0x3ac, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
MX51_PAD_GPIO1_0__SD1_CD = IOMUX_PAD(0x7b4, 0x3ac, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL),
MX51_PAD_GPIO1_1__SD1_WP = IOMUX_PAD(0x7b8, 0x3b0, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL),
MX51_PAD_SD2_CMD__SD2_CMD = IOMUX_PAD(0x7bc, 0x3b4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL),
@@ -154,11 +201,36 @@
MX51_PAD_SD2_DATA1__SD2_DATA1 = IOMUX_PAD(0x7c8, 0x3c0, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL),
MX51_PAD_SD2_DATA2__SD2_DATA2 = IOMUX_PAD(0x7cc, 0x3c4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL),
MX51_PAD_SD2_DATA3__SD2_DATA3 = IOMUX_PAD(0x7d0, 0x3c8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL),
+ MX51_PAD_GPIO1_2__GPIO1_2 = IOMUX_PAD(0x7d4, 0x3cc, 0, __NA_, 0, MX51_GPIO_PAD_CTRL),
+ MX51_PAD_GPIO1_2__PWM1_PWMO = IOMUX_PAD(0x7d4, 0x3cc, 1, __NA_, 0, NO_PAD_CTRL),
MX51_PAD_GPIO1_3__GPIO1_3 = IOMUX_PAD(0x7d8, 0x3d0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL),
MX51_PAD_GPIO1_5__GPIO1_5 = IOMUX_PAD(0x808, 0x3dc, 0, __NA_, 0, MX51_GPIO_PAD_CTRL),
MX51_PAD_GPIO1_6__GPIO1_6 = IOMUX_PAD(0x80c, 0x3e0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL),
+ MX51_PAD_GPIO1_7__GPIO1_7 = IOMUX_PAD(0x810, 0x3e4, 0, __NA_, 0, MX51_GPIO_PAD_CTRL),
MX51_PAD_GPIO1_7__SD2_WP = IOMUX_PAD(0x810, 0x3e4, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL),
MX51_PAD_GPIO1_8__SD2_CD = IOMUX_PAD(0x814, 0x3e8, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL),
+ MX51_GRP_DDRPKS = IOMUX_PAD(0x820, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_GRP_DRAM_B4 = IOMUX_PAD(0x82c, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_GRP_PKEDDR = IOMUX_PAD(0x838, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_GRP_DDR_A0 = IOMUX_PAD(0x83c, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_GRP_DDR_A1 = IOMUX_PAD(0x848, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_GRP_DDRAPUS = IOMUX_PAD(0x84c, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_GRP_HYSDDR0 = IOMUX_PAD(0x85c, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_GRP_HYSDDR1 = IOMUX_PAD(0x864, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_GRP_HYSDDR2 = IOMUX_PAD(0x86c, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_GRP_HYSDDR3 = IOMUX_PAD(0x874, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_GRP_DRAM_SR_B0 = IOMUX_PAD(0x878, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_GRP_DDRAPKS = IOMUX_PAD(0x87c, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_GRP_DRAM_SR_B1 = IOMUX_PAD(0x880, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_GRP_DDRPUS = IOMUX_PAD(0x884, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_GRP_DRAM_SR_B2 = IOMUX_PAD(0x88c, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_GRP_PKEADDR = IOMUX_PAD(0x890, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_GRP_DRAM_SR_B4 = IOMUX_PAD(0x89c, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_GRP_INMODE1 = IOMUX_PAD(0x8a0, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_GRP_DRAM_B0 = IOMUX_PAD(0x8a4, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_GRP_DRAM_B1 = IOMUX_PAD(0x8ac, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_GRP_DRAM_B2 = IOMUX_PAD(0x8b8, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_GRP_DDR_SR_A1 = IOMUX_PAD(0x8bc, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
};
#endif /* __IOMUX_MX51_H__ */
diff --git a/arch/arm/include/asm/arch-mx5/iomux-mx53.h b/arch/arm/include/asm/arch-mx5/iomux-mx53.h
new file mode 100644
index 0000000..f55c0f5
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx5/iomux-mx53.h
@@ -0,0 +1,1232 @@
+/*
+ * (C) Copyright 2013 ADVANSEE
+ * Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
+ *
+ * Based on Freescale's Linux i.MX iomux-mx53.h file:
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __IOMUX_MX53_H__
+#define __IOMUX_MX53_H__
+
+#include <asm/imx-common/iomux-v3.h>
+
+/* Pad control groupings */
+#define MX53_UART_PAD_CTRL (PAD_CTL_PUS_100K_DOWN | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+#define MX53_SDHC_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \
+ PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST)
+
+/*
+ * The naming convention for the pad modes is MX53_PAD_<padname>__<padmode>
+ * If <padname> refers to a GPIO, it is named GPIO_<unit>
+ * If <padmode> refers to a GPIO, it is named GPIO<unit>_<num>
+ * See also iomux-v3.h
+ */
+
+/* PAD MUX ALT INPSE PATH PADCTRL */
+enum {
+ MX53_PAD_GPIO_19__KPP_COL_5 = IOMUX_PAD(0x348, 0x020, 0, 0x840, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_19__GPIO4_5 = IOMUX_PAD(0x348, 0x020, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_19__CCM_CLKO = IOMUX_PAD(0x348, 0x020, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_19__SPDIF_OUT1 = IOMUX_PAD(0x348, 0x020, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2 = IOMUX_PAD(0x348, 0x020, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_19__ECSPI1_RDY = IOMUX_PAD(0x348, 0x020, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_19__FEC_TDATA_3 = IOMUX_PAD(0x348, 0x020, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_19__SRC_INT_BOOT = IOMUX_PAD(0x348, 0x020, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL0__KPP_COL_0 = IOMUX_PAD(0x34C, 0x024, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL0__GPIO4_6 = IOMUX_PAD(0x34C, 0x024, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC = IOMUX_PAD(0x34C, 0x024, 2, 0x758, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL0__UART4_TXD_MUX = IOMUX_PAD(0x34C, 0x024, 4, __NA_, 0, MX53_UART_PAD_CTRL),
+ MX53_PAD_KEY_COL0__ECSPI1_SCLK = IOMUX_PAD(0x34C, 0x024, 5, 0x79C, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL0__FEC_RDATA_3 = IOMUX_PAD(0x34C, 0x024, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL0__SRC_ANY_PU_RST = IOMUX_PAD(0x34C, 0x024, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_ROW0__KPP_ROW_0 = IOMUX_PAD(0x350, 0x028, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_ROW0__GPIO4_7 = IOMUX_PAD(0x350, 0x028, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD = IOMUX_PAD(0x350, 0x028, 2, 0x74C, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_ROW0__UART4_RXD_MUX = IOMUX_PAD(0x350, 0x028, 4, 0x890, 1, MX53_UART_PAD_CTRL),
+ MX53_PAD_KEY_ROW0__ECSPI1_MOSI = IOMUX_PAD(0x350, 0x028, 5, 0x7A4, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_ROW0__FEC_TX_ER = IOMUX_PAD(0x350, 0x028, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL1__KPP_COL_1 = IOMUX_PAD(0x354, 0x02C, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL1__GPIO4_8 = IOMUX_PAD(0x354, 0x02C, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS = IOMUX_PAD(0x354, 0x02C, 2, 0x75C, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL1__UART5_TXD_MUX = IOMUX_PAD(0x354, 0x02C, 4, __NA_, 0, MX53_UART_PAD_CTRL),
+ MX53_PAD_KEY_COL1__ECSPI1_MISO = IOMUX_PAD(0x354, 0x02C, 5, 0x7A0, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL1__FEC_RX_CLK = IOMUX_PAD(0x354, 0x02C, 6, 0x808, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL1__USBPHY1_TXREADY = IOMUX_PAD(0x354, 0x02C, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_ROW1__KPP_ROW_1 = IOMUX_PAD(0x358, 0x030, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_ROW1__GPIO4_9 = IOMUX_PAD(0x358, 0x030, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD = IOMUX_PAD(0x358, 0x030, 2, 0x748, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_ROW1__UART5_RXD_MUX = IOMUX_PAD(0x358, 0x030, 4, 0x898, 1, MX53_UART_PAD_CTRL),
+ MX53_PAD_KEY_ROW1__ECSPI1_SS0 = IOMUX_PAD(0x358, 0x030, 5, 0x7A8, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_ROW1__FEC_COL = IOMUX_PAD(0x358, 0x030, 6, 0x800, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_ROW1__USBPHY1_RXVALID = IOMUX_PAD(0x358, 0x030, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL2__KPP_COL_2 = IOMUX_PAD(0x35C, 0x034, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL2__GPIO4_10 = IOMUX_PAD(0x35C, 0x034, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL2__CAN1_TXCAN = IOMUX_PAD(0x35C, 0x034, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL2__FEC_MDIO = IOMUX_PAD(0x35C, 0x034, 4, 0x804, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL2__ECSPI1_SS1 = IOMUX_PAD(0x35C, 0x034, 5, 0x7AC, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL2__FEC_RDATA_2 = IOMUX_PAD(0x35C, 0x034, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE = IOMUX_PAD(0x35C, 0x034, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_ROW2__KPP_ROW_2 = IOMUX_PAD(0x360, 0x038, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_ROW2__GPIO4_11 = IOMUX_PAD(0x360, 0x038, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_ROW2__CAN1_RXCAN = IOMUX_PAD(0x360, 0x038, 2, 0x760, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_ROW2__FEC_MDC = IOMUX_PAD(0x360, 0x038, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_ROW2__ECSPI1_SS2 = IOMUX_PAD(0x360, 0x038, 5, 0x7B0, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_ROW2__FEC_TDATA_2 = IOMUX_PAD(0x360, 0x038, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_ROW2__USBPHY1_RXERROR = IOMUX_PAD(0x360, 0x038, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL3__KPP_COL_3 = IOMUX_PAD(0x364, 0x03C, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL3__GPIO4_12 = IOMUX_PAD(0x364, 0x03C, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL3__USBOH3_H2_DP = IOMUX_PAD(0x364, 0x03C, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL3__SPDIF_IN1 = IOMUX_PAD(0x364, 0x03C, 3, 0x870, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL3__I2C2_SCL = IOMUX_PAD(0x364, 0x03C, 4 | IOMUX_CONFIG_SION, 0x81C, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL3__ECSPI1_SS3 = IOMUX_PAD(0x364, 0x03C, 5, 0x7B4, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL3__FEC_CRS = IOMUX_PAD(0x364, 0x03C, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK = IOMUX_PAD(0x364, 0x03C, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_ROW3__KPP_ROW_3 = IOMUX_PAD(0x368, 0x040, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_ROW3__GPIO4_13 = IOMUX_PAD(0x368, 0x040, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_ROW3__USBOH3_H2_DM = IOMUX_PAD(0x368, 0x040, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK = IOMUX_PAD(0x368, 0x040, 3, 0x768, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_ROW3__I2C2_SDA = IOMUX_PAD(0x368, 0x040, 4 | IOMUX_CONFIG_SION, 0x820, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_ROW3__OSC32K_32K_OUT = IOMUX_PAD(0x368, 0x040, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_ROW3__CCM_PLL4_BYP = IOMUX_PAD(0x368, 0x040, 6, 0x77C, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 = IOMUX_PAD(0x368, 0x040, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL4__KPP_COL_4 = IOMUX_PAD(0x36C, 0x044, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL4__GPIO4_14 = IOMUX_PAD(0x36C, 0x044, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL4__CAN2_TXCAN = IOMUX_PAD(0x36C, 0x044, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL4__IPU_SISG_4 = IOMUX_PAD(0x36C, 0x044, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL4__UART5_RTS = IOMUX_PAD(0x36C, 0x044, 4, 0x894, 0, MX53_UART_PAD_CTRL),
+ MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC = IOMUX_PAD(0x36C, 0x044, 5, 0x89C, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 = IOMUX_PAD(0x36C, 0x044, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_ROW4__KPP_ROW_4 = IOMUX_PAD(0x370, 0x048, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_ROW4__GPIO4_15 = IOMUX_PAD(0x370, 0x048, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_ROW4__CAN2_RXCAN = IOMUX_PAD(0x370, 0x048, 2, 0x764, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_ROW4__IPU_SISG_5 = IOMUX_PAD(0x370, 0x048, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_ROW4__UART5_CTS = IOMUX_PAD(0x370, 0x048, 4, __NA_, 0, MX53_UART_PAD_CTRL),
+ MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR = IOMUX_PAD(0x370, 0x048, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID = IOMUX_PAD(0x370, 0x048, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK = IOMUX_PAD(0x378, 0x04C, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DI0_DISP_CLK__GPIO4_16 = IOMUX_PAD(0x378, 0x04C, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR = IOMUX_PAD(0x378, 0x04C, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0 = IOMUX_PAD(0x378, 0x04C, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0 = IOMUX_PAD(0x378, 0x04C, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID = IOMUX_PAD(0x378, 0x04C, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 = IOMUX_PAD(0x37C, 0x050, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DI0_PIN15__GPIO4_17 = IOMUX_PAD(0x37C, 0x050, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC = IOMUX_PAD(0x37C, 0x050, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1 = IOMUX_PAD(0x37C, 0x050, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1 = IOMUX_PAD(0x37C, 0x050, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DI0_PIN15__USBPHY1_BVALID = IOMUX_PAD(0x37C, 0x050, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 = IOMUX_PAD(0x380, 0x054, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DI0_PIN2__GPIO4_18 = IOMUX_PAD(0x380, 0x054, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD = IOMUX_PAD(0x380, 0x054, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2 = IOMUX_PAD(0x380, 0x054, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2 = IOMUX_PAD(0x380, 0x054, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION = IOMUX_PAD(0x380, 0x054, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 = IOMUX_PAD(0x384, 0x058, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DI0_PIN3__GPIO4_19 = IOMUX_PAD(0x384, 0x058, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS = IOMUX_PAD(0x384, 0x058, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3 = IOMUX_PAD(0x384, 0x058, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3 = IOMUX_PAD(0x384, 0x058, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DI0_PIN3__USBPHY1_IDDIG = IOMUX_PAD(0x384, 0x058, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DI0_PIN4__IPU_DI0_PIN4 = IOMUX_PAD(0x388, 0x05C, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DI0_PIN4__GPIO4_20 = IOMUX_PAD(0x388, 0x05C, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD = IOMUX_PAD(0x388, 0x05C, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DI0_PIN4__ESDHC1_WP = IOMUX_PAD(0x388, 0x05C, 3, 0x7FC, 0, NO_PAD_CTRL),
+ MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD = IOMUX_PAD(0x388, 0x05C, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4 = IOMUX_PAD(0x388, 0x05C, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT = IOMUX_PAD(0x388, 0x05C, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 = IOMUX_PAD(0x38C, 0x060, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT0__GPIO4_21 = IOMUX_PAD(0x38C, 0x060, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT0__CSPI_SCLK = IOMUX_PAD(0x38C, 0x060, 2, 0x780, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 = IOMUX_PAD(0x38C, 0x060, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN = IOMUX_PAD(0x38C, 0x060, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5 = IOMUX_PAD(0x38C, 0x060, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY = IOMUX_PAD(0x38C, 0x060, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 = IOMUX_PAD(0x390, 0x064, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT1__GPIO4_22 = IOMUX_PAD(0x390, 0x064, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT1__CSPI_MOSI = IOMUX_PAD(0x390, 0x064, 2, 0x788, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 = IOMUX_PAD(0x390, 0x064, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL
+ = IOMUX_PAD(0x390, 0x064, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6 = IOMUX_PAD(0x390, 0x064, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID = IOMUX_PAD(0x390, 0x064, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 = IOMUX_PAD(0x394, 0x068, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT2__GPIO4_23 = IOMUX_PAD(0x394, 0x068, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT2__CSPI_MISO = IOMUX_PAD(0x394, 0x068, 2, 0x784, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 = IOMUX_PAD(0x394, 0x068, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE = IOMUX_PAD(0x394, 0x068, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7 = IOMUX_PAD(0x394, 0x068, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE = IOMUX_PAD(0x394, 0x068, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 = IOMUX_PAD(0x398, 0x06C, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT3__GPIO4_24 = IOMUX_PAD(0x398, 0x06C, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT3__CSPI_SS0 = IOMUX_PAD(0x398, 0x06C, 2, 0x78C, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 = IOMUX_PAD(0x398, 0x06C, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR = IOMUX_PAD(0x398, 0x06C, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8 = IOMUX_PAD(0x398, 0x06C, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR = IOMUX_PAD(0x398, 0x06C, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 = IOMUX_PAD(0x39C, 0x070, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT4__GPIO4_25 = IOMUX_PAD(0x39C, 0x070, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT4__CSPI_SS1 = IOMUX_PAD(0x39C, 0x070, 2, 0x790, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 = IOMUX_PAD(0x39C, 0x070, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB = IOMUX_PAD(0x39C, 0x070, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9 = IOMUX_PAD(0x39C, 0x070, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK = IOMUX_PAD(0x39C, 0x070, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 = IOMUX_PAD(0x3A0, 0x074, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT5__GPIO4_26 = IOMUX_PAD(0x3A0, 0x074, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT5__CSPI_SS2 = IOMUX_PAD(0x3A0, 0x074, 2, 0x794, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 = IOMUX_PAD(0x3A0, 0x074, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS = IOMUX_PAD(0x3A0, 0x074, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10 = IOMUX_PAD(0x3A0, 0x074, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0 = IOMUX_PAD(0x3A0, 0x074, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 = IOMUX_PAD(0x3A4, 0x078, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT6__GPIO4_27 = IOMUX_PAD(0x3A4, 0x078, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT6__CSPI_SS3 = IOMUX_PAD(0x3A4, 0x078, 2, 0x798, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 = IOMUX_PAD(0x3A4, 0x078, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE = IOMUX_PAD(0x3A4, 0x078, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11 = IOMUX_PAD(0x3A4, 0x078, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1 = IOMUX_PAD(0x3A4, 0x078, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 = IOMUX_PAD(0x3A8, 0x07C, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT7__GPIO4_28 = IOMUX_PAD(0x3A8, 0x07C, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT7__CSPI_RDY = IOMUX_PAD(0x3A8, 0x07C, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 = IOMUX_PAD(0x3A8, 0x07C, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0 = IOMUX_PAD(0x3A8, 0x07C, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12 = IOMUX_PAD(0x3A8, 0x07C, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID = IOMUX_PAD(0x3A8, 0x07C, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 = IOMUX_PAD(0x3AC, 0x080, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT8__GPIO4_29 = IOMUX_PAD(0x3AC, 0x080, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT8__PWM1_PWMO = IOMUX_PAD(0x3AC, 0x080, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B = IOMUX_PAD(0x3AC, 0x080, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1 = IOMUX_PAD(0x3AC, 0x080, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13 = IOMUX_PAD(0x3AC, 0x080, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT8__USBPHY2_AVALID = IOMUX_PAD(0x3AC, 0x080, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 = IOMUX_PAD(0x3B0, 0x084, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT9__GPIO4_30 = IOMUX_PAD(0x3B0, 0x084, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT9__PWM2_PWMO = IOMUX_PAD(0x3B0, 0x084, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B = IOMUX_PAD(0x3B0, 0x084, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2 = IOMUX_PAD(0x3B0, 0x084, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14 = IOMUX_PAD(0x3B0, 0x084, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0 = IOMUX_PAD(0x3B0, 0x084, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 = IOMUX_PAD(0x3B4, 0x088, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT10__GPIO4_31 = IOMUX_PAD(0x3B4, 0x088, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP = IOMUX_PAD(0x3B4, 0x088, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3
+ = IOMUX_PAD(0x3B4, 0x088, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15 = IOMUX_PAD(0x3B4, 0x088, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1 = IOMUX_PAD(0x3B4, 0x088, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 = IOMUX_PAD(0x3B8, 0x08C, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT11__GPIO5_5 = IOMUX_PAD(0x3B8, 0x08C, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT = IOMUX_PAD(0x3B8, 0x08C, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4
+ = IOMUX_PAD(0x3B8, 0x08C, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16 = IOMUX_PAD(0x3B8, 0x08C, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2 = IOMUX_PAD(0x3B8, 0x08C, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 = IOMUX_PAD(0x3BC, 0x090, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT12__GPIO5_6 = IOMUX_PAD(0x3BC, 0x090, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK = IOMUX_PAD(0x3BC, 0x090, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5
+ = IOMUX_PAD(0x3BC, 0x090, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17 = IOMUX_PAD(0x3BC, 0x090, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3 = IOMUX_PAD(0x3BC, 0x090, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 = IOMUX_PAD(0x3C0, 0x094, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT13__GPIO5_7 = IOMUX_PAD(0x3C0, 0x094, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS = IOMUX_PAD(0x3C0, 0x094, 3, 0x754, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0
+ = IOMUX_PAD(0x3C0, 0x094, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18 = IOMUX_PAD(0x3C0, 0x094, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4 = IOMUX_PAD(0x3C0, 0x094, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 = IOMUX_PAD(0x3C4, 0x098, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT14__GPIO5_8 = IOMUX_PAD(0x3C4, 0x098, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC = IOMUX_PAD(0x3C4, 0x098, 3, 0x750, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1
+ = IOMUX_PAD(0x3C4, 0x098, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19 = IOMUX_PAD(0x3C4, 0x098, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5 = IOMUX_PAD(0x3C4, 0x098, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 = IOMUX_PAD(0x3C8, 0x09C, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT15__GPIO5_9 = IOMUX_PAD(0x3C8, 0x09C, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT15__ECSPI1_SS1 = IOMUX_PAD(0x3C8, 0x09C, 2, 0x7AC, 1, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT15__ECSPI2_SS1 = IOMUX_PAD(0x3C8, 0x09C, 3, 0x7C8, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2
+ = IOMUX_PAD(0x3C8, 0x09C, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20 = IOMUX_PAD(0x3C8, 0x09C, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6 = IOMUX_PAD(0x3C8, 0x09C, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 = IOMUX_PAD(0x3CC, 0x0A0, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT16__GPIO5_10 = IOMUX_PAD(0x3CC, 0x0A0, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT16__ECSPI2_MOSI = IOMUX_PAD(0x3CC, 0x0A0, 2, 0x7C0, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC = IOMUX_PAD(0x3CC, 0x0A0, 3, 0x758, 1, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 = IOMUX_PAD(0x3CC, 0x0A0, 4, 0x868, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3
+ = IOMUX_PAD(0x3CC, 0x0A0, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21 = IOMUX_PAD(0x3CC, 0x0A0, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7 = IOMUX_PAD(0x3CC, 0x0A0, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 = IOMUX_PAD(0x3D0, 0x0A4, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT17__GPIO5_11 = IOMUX_PAD(0x3D0, 0x0A4, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT17__ECSPI2_MISO = IOMUX_PAD(0x3D0, 0x0A4, 2, 0x7BC, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD = IOMUX_PAD(0x3D0, 0x0A4, 3, 0x74C, 1, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 = IOMUX_PAD(0x3D0, 0x0A4, 4, 0x86C, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4
+ = IOMUX_PAD(0x3D0, 0x0A4, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22 = IOMUX_PAD(0x3D0, 0x0A4, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 = IOMUX_PAD(0x3D4, 0x0A8, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT18__GPIO5_12 = IOMUX_PAD(0x3D4, 0x0A8, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT18__ECSPI2_SS0 = IOMUX_PAD(0x3D4, 0x0A8, 2, 0x7C4, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS = IOMUX_PAD(0x3D4, 0x0A8, 3, 0x75C, 1, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS = IOMUX_PAD(0x3D4, 0x0A8, 4, 0x73C, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5
+ = IOMUX_PAD(0x3D4, 0x0A8, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23 = IOMUX_PAD(0x3D4, 0x0A8, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2 = IOMUX_PAD(0x3D4, 0x0A8, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 = IOMUX_PAD(0x3D8, 0x0AC, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT19__GPIO5_13 = IOMUX_PAD(0x3D8, 0x0AC, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT19__ECSPI2_SCLK = IOMUX_PAD(0x3D8, 0x0AC, 2, 0x7B8, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD = IOMUX_PAD(0x3D8, 0x0AC, 3, 0x748, 1, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC = IOMUX_PAD(0x3D8, 0x0AC, 4, 0x738, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6
+ = IOMUX_PAD(0x3D8, 0x0AC, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24 = IOMUX_PAD(0x3D8, 0x0AC, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3 = IOMUX_PAD(0x3D8, 0x0AC, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 = IOMUX_PAD(0x3DC, 0x0B0, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT20__GPIO5_14 = IOMUX_PAD(0x3DC, 0x0B0, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT20__ECSPI1_SCLK = IOMUX_PAD(0x3DC, 0x0B0, 2, 0x79C, 1, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC = IOMUX_PAD(0x3DC, 0x0B0, 3, 0x740, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7
+ = IOMUX_PAD(0x3DC, 0x0B0, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25 = IOMUX_PAD(0x3DC, 0x0B0, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT20__SATA_PHY_TDI = IOMUX_PAD(0x3DC, 0x0B0, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 = IOMUX_PAD(0x3E0, 0x0B4, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT21__GPIO5_15 = IOMUX_PAD(0x3E0, 0x0B4, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT21__ECSPI1_MOSI = IOMUX_PAD(0x3E0, 0x0B4, 2, 0x7A4, 1, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD = IOMUX_PAD(0x3E0, 0x0B4, 3, 0x734, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0 = IOMUX_PAD(0x3E0, 0x0B4, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26 = IOMUX_PAD(0x3E0, 0x0B4, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT21__SATA_PHY_TDO = IOMUX_PAD(0x3E0, 0x0B4, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 = IOMUX_PAD(0x3E4, 0x0B8, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT22__GPIO5_16 = IOMUX_PAD(0x3E4, 0x0B8, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT22__ECSPI1_MISO = IOMUX_PAD(0x3E4, 0x0B8, 2, 0x7A0, 1, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS = IOMUX_PAD(0x3E4, 0x0B8, 3, 0x744, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1 = IOMUX_PAD(0x3E4, 0x0B8, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27 = IOMUX_PAD(0x3E4, 0x0B8, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT22__SATA_PHY_TCK = IOMUX_PAD(0x3E4, 0x0B8, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 = IOMUX_PAD(0x3E8, 0x0BC, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT23__GPIO5_17 = IOMUX_PAD(0x3E8, 0x0BC, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT23__ECSPI1_SS0 = IOMUX_PAD(0x3E8, 0x0BC, 2, 0x7A8, 1, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD = IOMUX_PAD(0x3E8, 0x0BC, 3, 0x730, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2 = IOMUX_PAD(0x3E8, 0x0BC, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28 = IOMUX_PAD(0x3E8, 0x0BC, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_DISP0_DAT23__SATA_PHY_TMS = IOMUX_PAD(0x3E8, 0x0BC, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK = IOMUX_PAD(0x3EC, 0x0C0, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_PIXCLK__GPIO5_18 = IOMUX_PAD(0x3EC, 0x0C0, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 = IOMUX_PAD(0x3EC, 0x0C0, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29 = IOMUX_PAD(0x3EC, 0x0C0, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC = IOMUX_PAD(0x3F0, 0x0C4, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_MCLK__GPIO5_19 = IOMUX_PAD(0x3F0, 0x0C4, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK = IOMUX_PAD(0x3F0, 0x0C4, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 = IOMUX_PAD(0x3F0, 0x0C4, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30 = IOMUX_PAD(0x3F0, 0x0C4, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_MCLK__TPIU_TRCTL = IOMUX_PAD(0x3F0, 0x0C4, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN = IOMUX_PAD(0x3F4, 0x0C8, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DATA_EN__GPIO5_20 = IOMUX_PAD(0x3F4, 0x0C8, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 = IOMUX_PAD(0x3F4, 0x0C8, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31 = IOMUX_PAD(0x3F4, 0x0C8, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK = IOMUX_PAD(0x3F4, 0x0C8, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC = IOMUX_PAD(0x3F8, 0x0CC, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_VSYNC__GPIO5_21 = IOMUX_PAD(0x3F8, 0x0CC, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 = IOMUX_PAD(0x3F8, 0x0CC, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32 = IOMUX_PAD(0x3F8, 0x0CC, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0 = IOMUX_PAD(0x3F8, 0x0CC, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 = IOMUX_PAD(0x3FC, 0x0D0, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT4__GPIO5_22 = IOMUX_PAD(0x3FC, 0x0D0, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT4__KPP_COL_5 = IOMUX_PAD(0x3FC, 0x0D0, 2, 0x840, 1, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT4__ECSPI1_SCLK = IOMUX_PAD(0x3FC, 0x0D0, 3, 0x79C, 2, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP = IOMUX_PAD(0x3FC, 0x0D0, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC = IOMUX_PAD(0x3FC, 0x0D0, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33 = IOMUX_PAD(0x3FC, 0x0D0, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT4__TPIU_TRACE_1 = IOMUX_PAD(0x3FC, 0x0D0, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 = IOMUX_PAD(0x400, 0x0D4, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT5__GPIO5_23 = IOMUX_PAD(0x400, 0x0D4, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT5__KPP_ROW_5 = IOMUX_PAD(0x400, 0x0D4, 2, 0x84C, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT5__ECSPI1_MOSI = IOMUX_PAD(0x400, 0x0D4, 3, 0x7A4, 2, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT = IOMUX_PAD(0x400, 0x0D4, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD = IOMUX_PAD(0x400, 0x0D4, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34 = IOMUX_PAD(0x400, 0x0D4, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT5__TPIU_TRACE_2 = IOMUX_PAD(0x400, 0x0D4, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 = IOMUX_PAD(0x404, 0x0D8, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT6__GPIO5_24 = IOMUX_PAD(0x404, 0x0D8, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT6__KPP_COL_6 = IOMUX_PAD(0x404, 0x0D8, 2, 0x844, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT6__ECSPI1_MISO = IOMUX_PAD(0x404, 0x0D8, 3, 0x7A0, 2, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK = IOMUX_PAD(0x404, 0x0D8, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS = IOMUX_PAD(0x404, 0x0D8, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35 = IOMUX_PAD(0x404, 0x0D8, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT6__TPIU_TRACE_3 = IOMUX_PAD(0x404, 0x0D8, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 = IOMUX_PAD(0x408, 0x0DC, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT7__GPIO5_25 = IOMUX_PAD(0x408, 0x0DC, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT7__KPP_ROW_6 = IOMUX_PAD(0x408, 0x0DC, 2, 0x850, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT7__ECSPI1_SS0 = IOMUX_PAD(0x408, 0x0DC, 3, 0x7A8, 2, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR = IOMUX_PAD(0x408, 0x0DC, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD = IOMUX_PAD(0x408, 0x0DC, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36 = IOMUX_PAD(0x408, 0x0DC, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT7__TPIU_TRACE_4 = IOMUX_PAD(0x408, 0x0DC, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 = IOMUX_PAD(0x40C, 0x0E0, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT8__GPIO5_26 = IOMUX_PAD(0x40C, 0x0E0, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT8__KPP_COL_7 = IOMUX_PAD(0x40C, 0x0E0, 2, 0x848, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT8__ECSPI2_SCLK = IOMUX_PAD(0x40C, 0x0E0, 3, 0x7B8, 1, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC = IOMUX_PAD(0x40C, 0x0E0, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT8__I2C1_SDA = IOMUX_PAD(0x40C, 0x0E0, 5 | IOMUX_CONFIG_SION, 0x818, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 = IOMUX_PAD(0x40C, 0x0E0, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 = IOMUX_PAD(0x40C, 0x0E0, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 = IOMUX_PAD(0x410, 0x0E4, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT9__GPIO5_27 = IOMUX_PAD(0x410, 0x0E4, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT9__KPP_ROW_7 = IOMUX_PAD(0x410, 0x0E4, 2, 0x854, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT9__ECSPI2_MOSI = IOMUX_PAD(0x410, 0x0E4, 3, 0x7C0, 1, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR = IOMUX_PAD(0x410, 0x0E4, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT9__I2C1_SCL = IOMUX_PAD(0x410, 0x0E4, 5 | IOMUX_CONFIG_SION, 0x814, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 = IOMUX_PAD(0x410, 0x0E4, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 = IOMUX_PAD(0x410, 0x0E4, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 = IOMUX_PAD(0x414, 0x0E8, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT10__GPIO5_28 = IOMUX_PAD(0x414, 0x0E8, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT10__UART1_TXD_MUX = IOMUX_PAD(0x414, 0x0E8, 2, __NA_, 0, MX53_UART_PAD_CTRL),
+ MX53_PAD_CSI0_DAT10__ECSPI2_MISO = IOMUX_PAD(0x414, 0x0E8, 3, 0x7BC, 1, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC = IOMUX_PAD(0x414, 0x0E8, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 = IOMUX_PAD(0x414, 0x0E8, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39 = IOMUX_PAD(0x414, 0x0E8, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT10__TPIU_TRACE_7 = IOMUX_PAD(0x414, 0x0E8, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 = IOMUX_PAD(0x418, 0x0EC, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT11__GPIO5_29 = IOMUX_PAD(0x418, 0x0EC, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT11__UART1_RXD_MUX = IOMUX_PAD(0x418, 0x0EC, 2, 0x878, 1, MX53_UART_PAD_CTRL),
+ MX53_PAD_CSI0_DAT11__ECSPI2_SS0 = IOMUX_PAD(0x418, 0x0EC, 3, 0x7C4, 1, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS = IOMUX_PAD(0x418, 0x0EC, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 = IOMUX_PAD(0x418, 0x0EC, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40 = IOMUX_PAD(0x418, 0x0EC, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 = IOMUX_PAD(0x418, 0x0EC, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 = IOMUX_PAD(0x41C, 0x0F0, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT12__GPIO5_30 = IOMUX_PAD(0x41C, 0x0F0, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT12__UART4_TXD_MUX = IOMUX_PAD(0x41C, 0x0F0, 2, __NA_, 0, MX53_UART_PAD_CTRL),
+ MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 = IOMUX_PAD(0x41C, 0x0F0, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 = IOMUX_PAD(0x41C, 0x0F0, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 = IOMUX_PAD(0x41C, 0x0F0, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT12__TPIU_TRACE_9 = IOMUX_PAD(0x41C, 0x0F0, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 = IOMUX_PAD(0x420, 0x0F4, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT13__GPIO5_31 = IOMUX_PAD(0x420, 0x0F4, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT13__UART4_RXD_MUX = IOMUX_PAD(0x420, 0x0F4, 2, 0x890, 3, MX53_UART_PAD_CTRL),
+ MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 = IOMUX_PAD(0x420, 0x0F4, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 = IOMUX_PAD(0x420, 0x0F4, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42 = IOMUX_PAD(0x420, 0x0F4, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 = IOMUX_PAD(0x420, 0x0F4, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 = IOMUX_PAD(0x424, 0x0F8, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT14__GPIO6_0 = IOMUX_PAD(0x424, 0x0F8, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT14__UART5_TXD_MUX = IOMUX_PAD(0x424, 0x0F8, 2, __NA_, 0, MX53_UART_PAD_CTRL),
+ MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 = IOMUX_PAD(0x424, 0x0F8, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 = IOMUX_PAD(0x424, 0x0F8, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 = IOMUX_PAD(0x424, 0x0F8, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT14__TPIU_TRACE_11 = IOMUX_PAD(0x424, 0x0F8, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 = IOMUX_PAD(0x428, 0x0FC, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT15__GPIO6_1 = IOMUX_PAD(0x428, 0x0FC, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT15__UART5_RXD_MUX = IOMUX_PAD(0x428, 0x0FC, 2, 0x898, 3, MX53_UART_PAD_CTRL),
+ MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 = IOMUX_PAD(0x428, 0x0FC, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 = IOMUX_PAD(0x428, 0x0FC, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44 = IOMUX_PAD(0x428, 0x0FC, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT15__TPIU_TRACE_12 = IOMUX_PAD(0x428, 0x0FC, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 = IOMUX_PAD(0x42C, 0x100, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT16__GPIO6_2 = IOMUX_PAD(0x42C, 0x100, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT16__UART4_RTS = IOMUX_PAD(0x42C, 0x100, 2, 0x88C, 0, MX53_UART_PAD_CTRL),
+ MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 = IOMUX_PAD(0x42C, 0x100, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 = IOMUX_PAD(0x42C, 0x100, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45 = IOMUX_PAD(0x42C, 0x100, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 = IOMUX_PAD(0x42C, 0x100, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 = IOMUX_PAD(0x430, 0x104, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT17__GPIO6_3 = IOMUX_PAD(0x430, 0x104, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT17__UART4_CTS = IOMUX_PAD(0x430, 0x104, 2, __NA_, 0, MX53_UART_PAD_CTRL),
+ MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 = IOMUX_PAD(0x430, 0x104, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 = IOMUX_PAD(0x430, 0x104, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 = IOMUX_PAD(0x430, 0x104, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT17__TPIU_TRACE_14 = IOMUX_PAD(0x430, 0x104, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 = IOMUX_PAD(0x434, 0x108, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT18__GPIO6_4 = IOMUX_PAD(0x434, 0x108, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT18__UART5_RTS = IOMUX_PAD(0x434, 0x108, 2, 0x894, 2, MX53_UART_PAD_CTRL),
+ MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 = IOMUX_PAD(0x434, 0x108, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 = IOMUX_PAD(0x434, 0x108, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47 = IOMUX_PAD(0x434, 0x108, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 = IOMUX_PAD(0x434, 0x108, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 = IOMUX_PAD(0x438, 0x10C, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT19__GPIO6_5 = IOMUX_PAD(0x438, 0x10C, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT19__UART5_CTS = IOMUX_PAD(0x438, 0x10C, 2, __NA_, 0, MX53_UART_PAD_CTRL),
+ MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 = IOMUX_PAD(0x438, 0x10C, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 = IOMUX_PAD(0x438, 0x10C, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 = IOMUX_PAD(0x438, 0x10C, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK = IOMUX_PAD(0x438, 0x10C, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A25__EMI_WEIM_A_25 = IOMUX_PAD(0x458, 0x110, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A25__GPIO5_2 = IOMUX_PAD(0x458, 0x110, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A25__ECSPI2_RDY = IOMUX_PAD(0x458, 0x110, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A25__IPU_DI1_PIN12 = IOMUX_PAD(0x458, 0x110, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A25__CSPI_SS1 = IOMUX_PAD(0x458, 0x110, 4, 0x790, 1, NO_PAD_CTRL),
+ MX53_PAD_EIM_A25__IPU_DI0_D1_CS = IOMUX_PAD(0x458, 0x110, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A25__USBPHY1_BISTOK = IOMUX_PAD(0x458, 0x110, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_EB2__EMI_WEIM_EB_2 = IOMUX_PAD(0x45C, 0x114, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_EB2__GPIO2_30 = IOMUX_PAD(0x45C, 0x114, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK = IOMUX_PAD(0x45C, 0x114, 2, 0x76C, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS = IOMUX_PAD(0x45C, 0x114, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_EB2__ECSPI1_SS0 = IOMUX_PAD(0x45C, 0x114, 4, 0x7A8, 3, NO_PAD_CTRL),
+ MX53_PAD_EIM_EB2__I2C2_SCL = IOMUX_PAD(0x45C, 0x114, 5 | IOMUX_CONFIG_SION, 0x81C, 1, NO_PAD_CTRL),
+ MX53_PAD_EIM_D16__EMI_WEIM_D_16 = IOMUX_PAD(0x460, 0x118, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D16__GPIO3_16 = IOMUX_PAD(0x460, 0x118, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D16__IPU_DI0_PIN5 = IOMUX_PAD(0x460, 0x118, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK = IOMUX_PAD(0x460, 0x118, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D16__ECSPI1_SCLK = IOMUX_PAD(0x460, 0x118, 4, 0x79C, 3, NO_PAD_CTRL),
+ MX53_PAD_EIM_D16__I2C2_SDA = IOMUX_PAD(0x460, 0x118, 5 | IOMUX_CONFIG_SION, 0x820, 1, NO_PAD_CTRL),
+ MX53_PAD_EIM_D17__EMI_WEIM_D_17 = IOMUX_PAD(0x464, 0x11C, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D17__GPIO3_17 = IOMUX_PAD(0x464, 0x11C, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D17__IPU_DI0_PIN6 = IOMUX_PAD(0x464, 0x11C, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN = IOMUX_PAD(0x464, 0x11C, 3, 0x830, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D17__ECSPI1_MISO = IOMUX_PAD(0x464, 0x11C, 4, 0x7A0, 3, NO_PAD_CTRL),
+ MX53_PAD_EIM_D17__I2C3_SCL = IOMUX_PAD(0x464, 0x11C, 5 | IOMUX_CONFIG_SION, 0x824, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D18__EMI_WEIM_D_18 = IOMUX_PAD(0x468, 0x120, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D18__GPIO3_18 = IOMUX_PAD(0x468, 0x120, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D18__IPU_DI0_PIN7 = IOMUX_PAD(0x468, 0x120, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO = IOMUX_PAD(0x468, 0x120, 3, 0x830, 1, NO_PAD_CTRL),
+ MX53_PAD_EIM_D18__ECSPI1_MOSI = IOMUX_PAD(0x468, 0x120, 4, 0x7A4, 3, NO_PAD_CTRL),
+ MX53_PAD_EIM_D18__I2C3_SDA = IOMUX_PAD(0x468, 0x120, 5 | IOMUX_CONFIG_SION, 0x828, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D18__IPU_DI1_D0_CS = IOMUX_PAD(0x468, 0x120, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D19__EMI_WEIM_D_19 = IOMUX_PAD(0x46C, 0x124, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D19__GPIO3_19 = IOMUX_PAD(0x46C, 0x124, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D19__IPU_DI0_PIN8 = IOMUX_PAD(0x46C, 0x124, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS = IOMUX_PAD(0x46C, 0x124, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D19__ECSPI1_SS1 = IOMUX_PAD(0x46C, 0x124, 4, 0x7AC, 2, NO_PAD_CTRL),
+ MX53_PAD_EIM_D19__EPIT1_EPITO = IOMUX_PAD(0x46C, 0x124, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D19__UART1_CTS = IOMUX_PAD(0x46C, 0x124, 6, __NA_, 0, MX53_UART_PAD_CTRL),
+ MX53_PAD_EIM_D19__USBOH3_USBH2_OC = IOMUX_PAD(0x46C, 0x124, 7, 0x8A4, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D20__EMI_WEIM_D_20 = IOMUX_PAD(0x470, 0x128, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D20__GPIO3_20 = IOMUX_PAD(0x470, 0x128, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D20__IPU_DI0_PIN16 = IOMUX_PAD(0x470, 0x128, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D20__IPU_SER_DISP0_CS = IOMUX_PAD(0x470, 0x128, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D20__CSPI_SS0 = IOMUX_PAD(0x470, 0x128, 4, 0x78C, 1, NO_PAD_CTRL),
+ MX53_PAD_EIM_D20__EPIT2_EPITO = IOMUX_PAD(0x470, 0x128, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D20__UART1_RTS = IOMUX_PAD(0x470, 0x128, 6, 0x874, 1, MX53_UART_PAD_CTRL),
+ MX53_PAD_EIM_D20__USBOH3_USBH2_PWR = IOMUX_PAD(0x470, 0x128, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D21__EMI_WEIM_D_21 = IOMUX_PAD(0x474, 0x12C, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D21__GPIO3_21 = IOMUX_PAD(0x474, 0x12C, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D21__IPU_DI0_PIN17 = IOMUX_PAD(0x474, 0x12C, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK = IOMUX_PAD(0x474, 0x12C, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D21__CSPI_SCLK = IOMUX_PAD(0x474, 0x12C, 4, 0x780, 1, NO_PAD_CTRL),
+ MX53_PAD_EIM_D21__I2C1_SCL = IOMUX_PAD(0x474, 0x12C, 5 | IOMUX_CONFIG_SION, 0x814, 1, NO_PAD_CTRL),
+ MX53_PAD_EIM_D21__USBOH3_USBOTG_OC = IOMUX_PAD(0x474, 0x12C, 6, 0x89C, 1, NO_PAD_CTRL),
+ MX53_PAD_EIM_D22__EMI_WEIM_D_22 = IOMUX_PAD(0x478, 0x130, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D22__GPIO3_22 = IOMUX_PAD(0x478, 0x130, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D22__IPU_DI0_PIN1 = IOMUX_PAD(0x478, 0x130, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN = IOMUX_PAD(0x478, 0x130, 3, 0x82C, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D22__CSPI_MISO = IOMUX_PAD(0x478, 0x130, 4, 0x784, 1, NO_PAD_CTRL),
+ MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR = IOMUX_PAD(0x478, 0x130, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D23__EMI_WEIM_D_23 = IOMUX_PAD(0x47C, 0x134, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D23__GPIO3_23 = IOMUX_PAD(0x47C, 0x134, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D23__UART3_CTS = IOMUX_PAD(0x47C, 0x134, 2, __NA_, 0, MX53_UART_PAD_CTRL),
+ MX53_PAD_EIM_D23__UART1_DCD = IOMUX_PAD(0x47C, 0x134, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D23__IPU_DI0_D0_CS = IOMUX_PAD(0x47C, 0x134, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D23__IPU_DI1_PIN2 = IOMUX_PAD(0x47C, 0x134, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN = IOMUX_PAD(0x47C, 0x134, 6, 0x834, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D23__IPU_DI1_PIN14 = IOMUX_PAD(0x47C, 0x134, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 = IOMUX_PAD(0x480, 0x138, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_EB3__GPIO2_31 = IOMUX_PAD(0x480, 0x138, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_EB3__UART3_RTS = IOMUX_PAD(0x480, 0x138, 2, 0x884, 1, MX53_UART_PAD_CTRL),
+ MX53_PAD_EIM_EB3__UART1_RI = IOMUX_PAD(0x480, 0x138, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_EB3__IPU_DI1_PIN3 = IOMUX_PAD(0x480, 0x138, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC = IOMUX_PAD(0x480, 0x138, 6, 0x838, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_EB3__IPU_DI1_PIN16 = IOMUX_PAD(0x480, 0x138, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D24__EMI_WEIM_D_24 = IOMUX_PAD(0x484, 0x13C, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D24__GPIO3_24 = IOMUX_PAD(0x484, 0x13C, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D24__UART3_TXD_MUX = IOMUX_PAD(0x484, 0x13C, 2, __NA_, 0, MX53_UART_PAD_CTRL),
+ MX53_PAD_EIM_D24__ECSPI1_SS2 = IOMUX_PAD(0x484, 0x13C, 3, 0x7B0, 1, NO_PAD_CTRL),
+ MX53_PAD_EIM_D24__CSPI_SS2 = IOMUX_PAD(0x484, 0x13C, 4, 0x794, 1, NO_PAD_CTRL),
+ MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS = IOMUX_PAD(0x484, 0x13C, 5, 0x754, 1, NO_PAD_CTRL),
+ MX53_PAD_EIM_D24__ECSPI2_SS2 = IOMUX_PAD(0x484, 0x13C, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D24__UART1_DTR = IOMUX_PAD(0x484, 0x13C, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D25__EMI_WEIM_D_25 = IOMUX_PAD(0x488, 0x140, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D25__GPIO3_25 = IOMUX_PAD(0x488, 0x140, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D25__UART3_RXD_MUX = IOMUX_PAD(0x488, 0x140, 2, 0x888, 1, MX53_UART_PAD_CTRL),
+ MX53_PAD_EIM_D25__ECSPI1_SS3 = IOMUX_PAD(0x488, 0x140, 3, 0x7B4, 1, NO_PAD_CTRL),
+ MX53_PAD_EIM_D25__CSPI_SS3 = IOMUX_PAD(0x488, 0x140, 4, 0x798, 1, NO_PAD_CTRL),
+ MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC = IOMUX_PAD(0x488, 0x140, 5, 0x750, 1, NO_PAD_CTRL),
+ MX53_PAD_EIM_D25__ECSPI2_SS3 = IOMUX_PAD(0x488, 0x140, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D25__UART1_DSR = IOMUX_PAD(0x488, 0x140, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D26__EMI_WEIM_D_26 = IOMUX_PAD(0x48C, 0x144, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D26__GPIO3_26 = IOMUX_PAD(0x48C, 0x144, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D26__UART2_TXD_MUX = IOMUX_PAD(0x48C, 0x144, 2, __NA_, 0, MX53_UART_PAD_CTRL),
+ MX53_PAD_EIM_D26__FIRI_RXD = IOMUX_PAD(0x48C, 0x144, 3, 0x80C, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D26__IPU_CSI0_D_1 = IOMUX_PAD(0x48C, 0x144, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D26__IPU_DI1_PIN11 = IOMUX_PAD(0x48C, 0x144, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D26__IPU_SISG_2 = IOMUX_PAD(0x48C, 0x144, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 = IOMUX_PAD(0x48C, 0x144, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D27__EMI_WEIM_D_27 = IOMUX_PAD(0x490, 0x148, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D27__GPIO3_27 = IOMUX_PAD(0x490, 0x148, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D27__UART2_RXD_MUX = IOMUX_PAD(0x490, 0x148, 2, 0x880, 1, MX53_UART_PAD_CTRL),
+ MX53_PAD_EIM_D27__FIRI_TXD = IOMUX_PAD(0x490, 0x148, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D27__IPU_CSI0_D_0 = IOMUX_PAD(0x490, 0x148, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D27__IPU_DI1_PIN13 = IOMUX_PAD(0x490, 0x148, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D27__IPU_SISG_3 = IOMUX_PAD(0x490, 0x148, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 = IOMUX_PAD(0x490, 0x148, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D28__EMI_WEIM_D_28 = IOMUX_PAD(0x494, 0x14C, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D28__GPIO3_28 = IOMUX_PAD(0x494, 0x14C, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D28__UART2_CTS = IOMUX_PAD(0x494, 0x14C, 2, __NA_, 0, MX53_UART_PAD_CTRL),
+ MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO = IOMUX_PAD(0x494, 0x14C, 3, 0x82C, 1, NO_PAD_CTRL),
+ MX53_PAD_EIM_D28__CSPI_MOSI = IOMUX_PAD(0x494, 0x14C, 4, 0x788, 1, NO_PAD_CTRL),
+ MX53_PAD_EIM_D28__I2C1_SDA = IOMUX_PAD(0x494, 0x14C, 5 | IOMUX_CONFIG_SION, 0x818, 1, NO_PAD_CTRL),
+ MX53_PAD_EIM_D28__IPU_EXT_TRIG = IOMUX_PAD(0x494, 0x14C, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D28__IPU_DI0_PIN13 = IOMUX_PAD(0x494, 0x14C, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D29__EMI_WEIM_D_29 = IOMUX_PAD(0x498, 0x150, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D29__GPIO3_29 = IOMUX_PAD(0x498, 0x150, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D29__UART2_RTS = IOMUX_PAD(0x498, 0x150, 2, 0x87C, 1, MX53_UART_PAD_CTRL),
+ MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS = IOMUX_PAD(0x498, 0x150, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D29__CSPI_SS0 = IOMUX_PAD(0x498, 0x150, 4, 0x78C, 2, NO_PAD_CTRL),
+ MX53_PAD_EIM_D29__IPU_DI1_PIN15 = IOMUX_PAD(0x498, 0x150, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D29__IPU_CSI1_VSYNC = IOMUX_PAD(0x498, 0x150, 6, 0x83C, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D29__IPU_DI0_PIN14 = IOMUX_PAD(0x498, 0x150, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D30__EMI_WEIM_D_30 = IOMUX_PAD(0x49C, 0x154, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D30__GPIO3_30 = IOMUX_PAD(0x49C, 0x154, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D30__UART3_CTS = IOMUX_PAD(0x49C, 0x154, 2, __NA_, 0, MX53_UART_PAD_CTRL),
+ MX53_PAD_EIM_D30__IPU_CSI0_D_3 = IOMUX_PAD(0x49C, 0x154, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D30__IPU_DI0_PIN11 = IOMUX_PAD(0x49C, 0x154, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 = IOMUX_PAD(0x49C, 0x154, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D30__USBOH3_USBH1_OC = IOMUX_PAD(0x49C, 0x154, 6, 0x8A0, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D30__USBOH3_USBH2_OC = IOMUX_PAD(0x49C, 0x154, 7, 0x8A4, 1, NO_PAD_CTRL),
+ MX53_PAD_EIM_D31__EMI_WEIM_D_31 = IOMUX_PAD(0x4A0, 0x158, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D31__GPIO3_31 = IOMUX_PAD(0x4A0, 0x158, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D31__UART3_RTS = IOMUX_PAD(0x4A0, 0x158, 2, 0x884, 3, MX53_UART_PAD_CTRL),
+ MX53_PAD_EIM_D31__IPU_CSI0_D_2 = IOMUX_PAD(0x4A0, 0x158, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D31__IPU_DI0_PIN12 = IOMUX_PAD(0x4A0, 0x158, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 = IOMUX_PAD(0x4A0, 0x158, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D31__USBOH3_USBH1_PWR = IOMUX_PAD(0x4A0, 0x158, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_D31__USBOH3_USBH2_PWR = IOMUX_PAD(0x4A0, 0x158, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A24__EMI_WEIM_A_24 = IOMUX_PAD(0x4A8, 0x15C, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A24__GPIO5_4 = IOMUX_PAD(0x4A8, 0x15C, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 = IOMUX_PAD(0x4A8, 0x15C, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A24__IPU_CSI1_D_19 = IOMUX_PAD(0x4A8, 0x15C, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A24__IPU_SISG_2 = IOMUX_PAD(0x4A8, 0x15C, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A24__USBPHY2_BVALID = IOMUX_PAD(0x4A8, 0x15C, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A23__EMI_WEIM_A_23 = IOMUX_PAD(0x4AC, 0x160, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A23__GPIO6_6 = IOMUX_PAD(0x4AC, 0x160, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 = IOMUX_PAD(0x4AC, 0x160, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A23__IPU_CSI1_D_18 = IOMUX_PAD(0x4AC, 0x160, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A23__IPU_SISG_3 = IOMUX_PAD(0x4AC, 0x160, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A23__USBPHY2_ENDSESSION = IOMUX_PAD(0x4AC, 0x160, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A22__EMI_WEIM_A_22 = IOMUX_PAD(0x4B0, 0x164, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A22__GPIO2_16 = IOMUX_PAD(0x4B0, 0x164, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 = IOMUX_PAD(0x4B0, 0x164, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A22__IPU_CSI1_D_17 = IOMUX_PAD(0x4B0, 0x164, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A22__SRC_BT_CFG1_7 = IOMUX_PAD(0x4B0, 0x164, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A21__EMI_WEIM_A_21 = IOMUX_PAD(0x4B4, 0x168, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A21__GPIO2_17 = IOMUX_PAD(0x4B4, 0x168, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 = IOMUX_PAD(0x4B4, 0x168, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A21__IPU_CSI1_D_16 = IOMUX_PAD(0x4B4, 0x168, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A21__SRC_BT_CFG1_6 = IOMUX_PAD(0x4B4, 0x168, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A20__EMI_WEIM_A_20 = IOMUX_PAD(0x4B8, 0x16C, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A20__GPIO2_18 = IOMUX_PAD(0x4B8, 0x16C, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 = IOMUX_PAD(0x4B8, 0x16C, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A20__IPU_CSI1_D_15 = IOMUX_PAD(0x4B8, 0x16C, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A20__SRC_BT_CFG1_5 = IOMUX_PAD(0x4B8, 0x16C, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A19__EMI_WEIM_A_19 = IOMUX_PAD(0x4BC, 0x170, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A19__GPIO2_19 = IOMUX_PAD(0x4BC, 0x170, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 = IOMUX_PAD(0x4BC, 0x170, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A19__IPU_CSI1_D_14 = IOMUX_PAD(0x4BC, 0x170, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A19__SRC_BT_CFG1_4 = IOMUX_PAD(0x4BC, 0x170, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A18__EMI_WEIM_A_18 = IOMUX_PAD(0x4C0, 0x174, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A18__GPIO2_20 = IOMUX_PAD(0x4C0, 0x174, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 = IOMUX_PAD(0x4C0, 0x174, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A18__IPU_CSI1_D_13 = IOMUX_PAD(0x4C0, 0x174, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A18__SRC_BT_CFG1_3 = IOMUX_PAD(0x4C0, 0x174, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A17__EMI_WEIM_A_17 = IOMUX_PAD(0x4C4, 0x178, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A17__GPIO2_21 = IOMUX_PAD(0x4C4, 0x178, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 = IOMUX_PAD(0x4C4, 0x178, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A17__IPU_CSI1_D_12 = IOMUX_PAD(0x4C4, 0x178, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A17__SRC_BT_CFG1_2 = IOMUX_PAD(0x4C4, 0x178, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A16__EMI_WEIM_A_16 = IOMUX_PAD(0x4C8, 0x17C, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A16__GPIO2_22 = IOMUX_PAD(0x4C8, 0x17C, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK = IOMUX_PAD(0x4C8, 0x17C, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK = IOMUX_PAD(0x4C8, 0x17C, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_A16__SRC_BT_CFG1_1 = IOMUX_PAD(0x4C8, 0x17C, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_CS0__EMI_WEIM_CS_0 = IOMUX_PAD(0x4CC, 0x180, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_CS0__GPIO2_23 = IOMUX_PAD(0x4CC, 0x180, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_CS0__ECSPI2_SCLK = IOMUX_PAD(0x4CC, 0x180, 2, 0x7B8, 2, NO_PAD_CTRL),
+ MX53_PAD_EIM_CS0__IPU_DI1_PIN5 = IOMUX_PAD(0x4CC, 0x180, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 = IOMUX_PAD(0x4D0, 0x184, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_CS1__GPIO2_24 = IOMUX_PAD(0x4D0, 0x184, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_CS1__ECSPI2_MOSI = IOMUX_PAD(0x4D0, 0x184, 2, 0x7C0, 2, NO_PAD_CTRL),
+ MX53_PAD_EIM_CS1__IPU_DI1_PIN6 = IOMUX_PAD(0x4D0, 0x184, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_OE__EMI_WEIM_OE = IOMUX_PAD(0x4D4, 0x188, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_OE__GPIO2_25 = IOMUX_PAD(0x4D4, 0x188, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_OE__ECSPI2_MISO = IOMUX_PAD(0x4D4, 0x188, 2, 0x7BC, 2, NO_PAD_CTRL),
+ MX53_PAD_EIM_OE__IPU_DI1_PIN7 = IOMUX_PAD(0x4D4, 0x188, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_OE__USBPHY2_IDDIG = IOMUX_PAD(0x4D4, 0x188, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_RW__EMI_WEIM_RW = IOMUX_PAD(0x4D8, 0x18C, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_RW__GPIO2_26 = IOMUX_PAD(0x4D8, 0x18C, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_RW__ECSPI2_SS0 = IOMUX_PAD(0x4D8, 0x18C, 2, 0x7C4, 2, NO_PAD_CTRL),
+ MX53_PAD_EIM_RW__IPU_DI1_PIN8 = IOMUX_PAD(0x4D8, 0x18C, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT = IOMUX_PAD(0x4D8, 0x18C, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_LBA__EMI_WEIM_LBA = IOMUX_PAD(0x4DC, 0x190, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_LBA__GPIO2_27 = IOMUX_PAD(0x4DC, 0x190, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_LBA__ECSPI2_SS1 = IOMUX_PAD(0x4DC, 0x190, 2, 0x7C8, 1, NO_PAD_CTRL),
+ MX53_PAD_EIM_LBA__IPU_DI1_PIN17 = IOMUX_PAD(0x4DC, 0x190, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_LBA__SRC_BT_CFG1_0 = IOMUX_PAD(0x4DC, 0x190, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_EB0__EMI_WEIM_EB_0 = IOMUX_PAD(0x4E4, 0x194, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_EB0__GPIO2_28 = IOMUX_PAD(0x4E4, 0x194, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 = IOMUX_PAD(0x4E4, 0x194, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_EB0__IPU_CSI1_D_11 = IOMUX_PAD(0x4E4, 0x194, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_EB0__GPC_PMIC_RDY = IOMUX_PAD(0x4E4, 0x194, 5, 0x810, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_EB0__SRC_BT_CFG2_7 = IOMUX_PAD(0x4E4, 0x194, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_EB1__EMI_WEIM_EB_1 = IOMUX_PAD(0x4E8, 0x198, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_EB1__GPIO2_29 = IOMUX_PAD(0x4E8, 0x198, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 = IOMUX_PAD(0x4E8, 0x198, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_EB1__IPU_CSI1_D_10 = IOMUX_PAD(0x4E8, 0x198, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_EB1__SRC_BT_CFG2_6 = IOMUX_PAD(0x4E8, 0x198, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 = IOMUX_PAD(0x4EC, 0x19C, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA0__GPIO3_0 = IOMUX_PAD(0x4EC, 0x19C, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 = IOMUX_PAD(0x4EC, 0x19C, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA0__IPU_CSI1_D_9 = IOMUX_PAD(0x4EC, 0x19C, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA0__SRC_BT_CFG2_5 = IOMUX_PAD(0x4EC, 0x19C, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 = IOMUX_PAD(0x4F0, 0x1A0, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA1__GPIO3_1 = IOMUX_PAD(0x4F0, 0x1A0, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 = IOMUX_PAD(0x4F0, 0x1A0, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA1__IPU_CSI1_D_8 = IOMUX_PAD(0x4F0, 0x1A0, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA1__SRC_BT_CFG2_4 = IOMUX_PAD(0x4F0, 0x1A0, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 = IOMUX_PAD(0x4F4, 0x1A4, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA2__GPIO3_2 = IOMUX_PAD(0x4F4, 0x1A4, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 = IOMUX_PAD(0x4F4, 0x1A4, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA2__IPU_CSI1_D_7 = IOMUX_PAD(0x4F4, 0x1A4, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA2__SRC_BT_CFG2_3 = IOMUX_PAD(0x4F4, 0x1A4, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 = IOMUX_PAD(0x4F8, 0x1A8, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA3__GPIO3_3 = IOMUX_PAD(0x4F8, 0x1A8, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 = IOMUX_PAD(0x4F8, 0x1A8, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA3__IPU_CSI1_D_6 = IOMUX_PAD(0x4F8, 0x1A8, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA3__SRC_BT_CFG2_2 = IOMUX_PAD(0x4F8, 0x1A8, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 = IOMUX_PAD(0x4FC, 0x1AC, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA4__GPIO3_4 = IOMUX_PAD(0x4FC, 0x1AC, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 = IOMUX_PAD(0x4FC, 0x1AC, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA4__IPU_CSI1_D_5 = IOMUX_PAD(0x4FC, 0x1AC, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA4__SRC_BT_CFG3_7 = IOMUX_PAD(0x4FC, 0x1AC, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 = IOMUX_PAD(0x500, 0x1B0, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA5__GPIO3_5 = IOMUX_PAD(0x500, 0x1B0, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 = IOMUX_PAD(0x500, 0x1B0, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA5__IPU_CSI1_D_4 = IOMUX_PAD(0x500, 0x1B0, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 = IOMUX_PAD(0x500, 0x1B0, 7 | IOMUX_CONFIG_SION, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 = IOMUX_PAD(0x504, 0x1B4, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA6__GPIO3_6 = IOMUX_PAD(0x504, 0x1B4, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 = IOMUX_PAD(0x504, 0x1B4, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA6__IPU_CSI1_D_3 = IOMUX_PAD(0x504, 0x1B4, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA6__SRC_BT_CFG3_5 = IOMUX_PAD(0x504, 0x1B4, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 = IOMUX_PAD(0x508, 0x1B8, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA7__GPIO3_7 = IOMUX_PAD(0x508, 0x1B8, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 = IOMUX_PAD(0x508, 0x1B8, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA7__IPU_CSI1_D_2 = IOMUX_PAD(0x508, 0x1B8, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA7__SRC_BT_CFG3_4 = IOMUX_PAD(0x508, 0x1B8, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8 = IOMUX_PAD(0x50C, 0x1BC, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA8__GPIO3_8 = IOMUX_PAD(0x50C, 0x1BC, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 = IOMUX_PAD(0x50C, 0x1BC, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA8__IPU_CSI1_D_1 = IOMUX_PAD(0x50C, 0x1BC, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA8__SRC_BT_CFG3_3 = IOMUX_PAD(0x50C, 0x1BC, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9 = IOMUX_PAD(0x510, 0x1C0, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA9__GPIO3_9 = IOMUX_PAD(0x510, 0x1C0, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 = IOMUX_PAD(0x510, 0x1C0, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA9__IPU_CSI1_D_0 = IOMUX_PAD(0x510, 0x1C0, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA9__SRC_BT_CFG3_2 = IOMUX_PAD(0x510, 0x1C0, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10 = IOMUX_PAD(0x514, 0x1C4, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA10__GPIO3_10 = IOMUX_PAD(0x514, 0x1C4, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA10__IPU_DI1_PIN15 = IOMUX_PAD(0x514, 0x1C4, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN = IOMUX_PAD(0x514, 0x1C4, 4, 0x834, 1, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA10__SRC_BT_CFG3_1 = IOMUX_PAD(0x514, 0x1C4, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11 = IOMUX_PAD(0x518, 0x1C8, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA11__GPIO3_11 = IOMUX_PAD(0x518, 0x1C8, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA11__IPU_DI1_PIN2 = IOMUX_PAD(0x518, 0x1C8, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC = IOMUX_PAD(0x518, 0x1C8, 4, 0x838, 1, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12 = IOMUX_PAD(0x51C, 0x1CC, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA12__GPIO3_12 = IOMUX_PAD(0x51C, 0x1CC, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA12__IPU_DI1_PIN3 = IOMUX_PAD(0x51C, 0x1CC, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC = IOMUX_PAD(0x51C, 0x1CC, 4, 0x83C, 1, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13 = IOMUX_PAD(0x520, 0x1D0, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA13__GPIO3_13 = IOMUX_PAD(0x520, 0x1D0, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA13__IPU_DI1_D0_CS = IOMUX_PAD(0x520, 0x1D0, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK = IOMUX_PAD(0x520, 0x1D0, 4, 0x76C, 1, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14 = IOMUX_PAD(0x524, 0x1D4, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA14__GPIO3_14 = IOMUX_PAD(0x524, 0x1D4, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA14__IPU_DI1_D1_CS = IOMUX_PAD(0x524, 0x1D4, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK = IOMUX_PAD(0x524, 0x1D4, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15 = IOMUX_PAD(0x528, 0x1D8, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA15__GPIO3_15 = IOMUX_PAD(0x528, 0x1D8, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA15__IPU_DI1_PIN1 = IOMUX_PAD(0x528, 0x1D8, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_DA15__IPU_DI1_PIN4 = IOMUX_PAD(0x528, 0x1D8, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B = IOMUX_PAD(0x52C, 0x1DC, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_WE_B__GPIO6_12 = IOMUX_PAD(0x52C, 0x1DC, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B = IOMUX_PAD(0x530, 0x1E0, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_RE_B__GPIO6_13 = IOMUX_PAD(0x530, 0x1E0, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT = IOMUX_PAD(0x534, 0x1E4, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_WAIT__GPIO5_0 = IOMUX_PAD(0x534, 0x1E4, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B = IOMUX_PAD(0x534, 0x1E4, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_LVDS1_TX3_P__GPIO6_22 = IOMUX_PAD(__NA_, 0x1EC, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 = IOMUX_PAD(__NA_, 0x1EC, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_LVDS1_TX2_P__GPIO6_24 = IOMUX_PAD(__NA_, 0x1F0, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 = IOMUX_PAD(__NA_, 0x1F0, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_LVDS1_CLK_P__GPIO6_26 = IOMUX_PAD(__NA_, 0x1F4, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK = IOMUX_PAD(__NA_, 0x1F4, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_LVDS1_TX1_P__GPIO6_28 = IOMUX_PAD(__NA_, 0x1F8, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 = IOMUX_PAD(__NA_, 0x1F8, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_LVDS1_TX0_P__GPIO6_30 = IOMUX_PAD(__NA_, 0x1FC, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 = IOMUX_PAD(__NA_, 0x1FC, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_LVDS0_TX3_P__GPIO7_22 = IOMUX_PAD(__NA_, 0x200, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 = IOMUX_PAD(__NA_, 0x200, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_LVDS0_CLK_P__GPIO7_24 = IOMUX_PAD(__NA_, 0x204, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK = IOMUX_PAD(__NA_, 0x204, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_LVDS0_TX2_P__GPIO7_26 = IOMUX_PAD(__NA_, 0x208, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 = IOMUX_PAD(__NA_, 0x208, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_LVDS0_TX1_P__GPIO7_28 = IOMUX_PAD(__NA_, 0x20C, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 = IOMUX_PAD(__NA_, 0x20C, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_LVDS0_TX0_P__GPIO7_30 = IOMUX_PAD(__NA_, 0x210, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 = IOMUX_PAD(__NA_, 0x210, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_10__GPIO4_0 = IOMUX_PAD(0x540, 0x214, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_10__OSC32k_32K_OUT = IOMUX_PAD(0x540, 0x214, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_11__GPIO4_1 = IOMUX_PAD(0x544, 0x218, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_12__GPIO4_2 = IOMUX_PAD(0x548, 0x21C, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_13__GPIO4_3 = IOMUX_PAD(0x54C, 0x220, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_14__GPIO4_4 = IOMUX_PAD(0x550, 0x224, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_CLE__EMI_NANDF_CLE = IOMUX_PAD(0x5A0, 0x228, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_CLE__GPIO6_7 = IOMUX_PAD(0x5A0, 0x228, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0 = IOMUX_PAD(0x5A0, 0x228, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_ALE__EMI_NANDF_ALE = IOMUX_PAD(0x5A4, 0x22C, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_ALE__GPIO6_8 = IOMUX_PAD(0x5A4, 0x22C, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1 = IOMUX_PAD(0x5A4, 0x22C, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B = IOMUX_PAD(0x5A8, 0x230, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_WP_B__GPIO6_9 = IOMUX_PAD(0x5A8, 0x230, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2 = IOMUX_PAD(0x5A8, 0x230, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 = IOMUX_PAD(0x5AC, 0x234, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_RB0__GPIO6_10 = IOMUX_PAD(0x5AC, 0x234, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3 = IOMUX_PAD(0x5AC, 0x234, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 = IOMUX_PAD(0x5B0, 0x238, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_CS0__GPIO6_11 = IOMUX_PAD(0x5B0, 0x238, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4 = IOMUX_PAD(0x5B0, 0x238, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1 = IOMUX_PAD(0x5B4, 0x23C, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_CS1__GPIO6_14 = IOMUX_PAD(0x5B4, 0x23C, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_CS1__MLB_MLBCLK = IOMUX_PAD(0x5B4, 0x23C, 6, 0x858, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5 = IOMUX_PAD(0x5B4, 0x23C, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2 = IOMUX_PAD(0x5B8, 0x240, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_CS2__GPIO6_15 = IOMUX_PAD(0x5B8, 0x240, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_CS2__IPU_SISG_0 = IOMUX_PAD(0x5B8, 0x240, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_CS2__ESAI1_TX0 = IOMUX_PAD(0x5B8, 0x240, 3, 0x7E4, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_CS2__EMI_WEIM_CRE = IOMUX_PAD(0x5B8, 0x240, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK = IOMUX_PAD(0x5B8, 0x240, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_CS2__MLB_MLBSIG = IOMUX_PAD(0x5B8, 0x240, 6, 0x860, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6 = IOMUX_PAD(0x5B8, 0x240, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3 = IOMUX_PAD(0x5BC, 0x244, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_CS3__GPIO6_16 = IOMUX_PAD(0x5BC, 0x244, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_CS3__IPU_SISG_1 = IOMUX_PAD(0x5BC, 0x244, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_CS3__ESAI1_TX1 = IOMUX_PAD(0x5BC, 0x244, 3, 0x7E8, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_CS3__EMI_WEIM_A_26 = IOMUX_PAD(0x5BC, 0x244, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_CS3__MLB_MLBDAT = IOMUX_PAD(0x5BC, 0x244, 6, 0x85C, 0, NO_PAD_CTRL),
+ MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7 = IOMUX_PAD(0x5BC, 0x244, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_MDIO__FEC_MDIO = IOMUX_PAD(0x5C4, 0x248, 0, 0x804, 1, NO_PAD_CTRL),
+ MX53_PAD_FEC_MDIO__GPIO1_22 = IOMUX_PAD(0x5C4, 0x248, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_MDIO__ESAI1_SCKR = IOMUX_PAD(0x5C4, 0x248, 2, 0x7DC, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_MDIO__FEC_COL = IOMUX_PAD(0x5C4, 0x248, 3, 0x800, 1, NO_PAD_CTRL),
+ MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2 = IOMUX_PAD(0x5C4, 0x248, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3 = IOMUX_PAD(0x5C4, 0x248, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49 = IOMUX_PAD(0x5C4, 0x248, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_REF_CLK__FEC_TX_CLK = IOMUX_PAD(0x5C8, 0x24C, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_REF_CLK__GPIO1_23 = IOMUX_PAD(0x5C8, 0x24C, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_REF_CLK__ESAI1_FSR = IOMUX_PAD(0x5C8, 0x24C, 2, 0x7CC, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4 = IOMUX_PAD(0x5C8, 0x24C, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50 = IOMUX_PAD(0x5C8, 0x24C, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_RX_ER__FEC_RX_ER = IOMUX_PAD(0x5CC, 0x250, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_RX_ER__GPIO1_24 = IOMUX_PAD(0x5CC, 0x250, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_RX_ER__ESAI1_HCKR = IOMUX_PAD(0x5CC, 0x250, 2, 0x7D4, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_RX_ER__FEC_RX_CLK = IOMUX_PAD(0x5CC, 0x250, 3, 0x808, 1, NO_PAD_CTRL),
+ MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3 = IOMUX_PAD(0x5CC, 0x250, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_CRS_DV__FEC_RX_DV = IOMUX_PAD(0x5D0, 0x254, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_CRS_DV__GPIO1_25 = IOMUX_PAD(0x5D0, 0x254, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_CRS_DV__ESAI1_SCKT = IOMUX_PAD(0x5D0, 0x254, 2, 0x7E0, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_RXD1__FEC_RDATA_1 = IOMUX_PAD(0x5D4, 0x258, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_RXD1__GPIO1_26 = IOMUX_PAD(0x5D4, 0x258, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_RXD1__ESAI1_FST = IOMUX_PAD(0x5D4, 0x258, 2, 0x7D0, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_RXD1__MLB_MLBSIG = IOMUX_PAD(0x5D4, 0x258, 3, 0x860, 1, NO_PAD_CTRL),
+ MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1 = IOMUX_PAD(0x5D4, 0x258, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_RXD0__FEC_RDATA_0 = IOMUX_PAD(0x5D8, 0x25C, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_RXD0__GPIO1_27 = IOMUX_PAD(0x5D8, 0x25C, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_RXD0__ESAI1_HCKT = IOMUX_PAD(0x5D8, 0x25C, 2, 0x7D8, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_RXD0__OSC32k_32K_OUT = IOMUX_PAD(0x5D8, 0x25C, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_TX_EN__FEC_TX_EN = IOMUX_PAD(0x5DC, 0x260, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_TX_EN__GPIO1_28 = IOMUX_PAD(0x5DC, 0x260, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2 = IOMUX_PAD(0x5DC, 0x260, 2, 0x7F0, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_TXD1__FEC_TDATA_1 = IOMUX_PAD(0x5E0, 0x264, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_TXD1__GPIO1_29 = IOMUX_PAD(0x5E0, 0x264, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3 = IOMUX_PAD(0x5E0, 0x264, 2, 0x7EC, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_TXD1__MLB_MLBCLK = IOMUX_PAD(0x5E0, 0x264, 3, 0x858, 1, NO_PAD_CTRL),
+ MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK = IOMUX_PAD(0x5E0, 0x264, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_TXD0__FEC_TDATA_0 = IOMUX_PAD(0x5E4, 0x268, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_TXD0__GPIO1_30 = IOMUX_PAD(0x5E4, 0x268, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1 = IOMUX_PAD(0x5E4, 0x268, 2, 0x7F4, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0 = IOMUX_PAD(0x5E4, 0x268, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_MDC__FEC_MDC = IOMUX_PAD(0x5E8, 0x26C, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_MDC__GPIO1_31 = IOMUX_PAD(0x5E8, 0x26C, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_MDC__ESAI1_TX5_RX0 = IOMUX_PAD(0x5E8, 0x26C, 2, 0x7F8, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_MDC__MLB_MLBDAT = IOMUX_PAD(0x5E8, 0x26C, 3, 0x85C, 1, NO_PAD_CTRL),
+ MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG = IOMUX_PAD(0x5E8, 0x26C, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1 = IOMUX_PAD(0x5E8, 0x26C, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DIOW__PATA_DIOW = IOMUX_PAD(0x5F0, 0x270, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DIOW__GPIO6_17 = IOMUX_PAD(0x5F0, 0x270, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DIOW__UART1_TXD_MUX = IOMUX_PAD(0x5F0, 0x270, 3, __NA_, 0, MX53_UART_PAD_CTRL),
+ MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2 = IOMUX_PAD(0x5F0, 0x270, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DMACK__PATA_DMACK = IOMUX_PAD(0x5F4, 0x274, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DMACK__GPIO6_18 = IOMUX_PAD(0x5F4, 0x274, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DMACK__UART1_RXD_MUX = IOMUX_PAD(0x5F4, 0x274, 3, 0x878, 3, MX53_UART_PAD_CTRL),
+ MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3 = IOMUX_PAD(0x5F4, 0x274, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DMARQ__PATA_DMARQ = IOMUX_PAD(0x5F8, 0x278, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DMARQ__GPIO7_0 = IOMUX_PAD(0x5F8, 0x278, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DMARQ__UART2_TXD_MUX = IOMUX_PAD(0x5F8, 0x278, 3, __NA_, 0, MX53_UART_PAD_CTRL),
+ MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0 = IOMUX_PAD(0x5F8, 0x278, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4 = IOMUX_PAD(0x5F8, 0x278, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN = IOMUX_PAD(0x5FC, 0x27C, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_BUFFER_EN__GPIO7_1 = IOMUX_PAD(0x5FC, 0x27C, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX = IOMUX_PAD(0x5FC, 0x27C, 3, 0x880, 3, MX53_UART_PAD_CTRL),
+ MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1 = IOMUX_PAD(0x5FC, 0x27C, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5 = IOMUX_PAD(0x5FC, 0x27C, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_INTRQ__PATA_INTRQ = IOMUX_PAD(0x600, 0x280, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_INTRQ__GPIO7_2 = IOMUX_PAD(0x600, 0x280, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_INTRQ__UART2_CTS = IOMUX_PAD(0x600, 0x280, 3, __NA_, 0, MX53_UART_PAD_CTRL),
+ MX53_PAD_PATA_INTRQ__CAN1_TXCAN = IOMUX_PAD(0x600, 0x280, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2 = IOMUX_PAD(0x600, 0x280, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6 = IOMUX_PAD(0x600, 0x280, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DIOR__PATA_DIOR = IOMUX_PAD(0x604, 0x284, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DIOR__GPIO7_3 = IOMUX_PAD(0x604, 0x284, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DIOR__UART2_RTS = IOMUX_PAD(0x604, 0x284, 3, 0x87C, 3, MX53_UART_PAD_CTRL),
+ MX53_PAD_PATA_DIOR__CAN1_RXCAN = IOMUX_PAD(0x604, 0x284, 4, 0x760, 1, NO_PAD_CTRL),
+ MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7 = IOMUX_PAD(0x604, 0x284, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B = IOMUX_PAD(0x608, 0x288, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_RESET_B__GPIO7_4 = IOMUX_PAD(0x608, 0x288, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_RESET_B__ESDHC3_CMD = IOMUX_PAD(0x608, 0x288, 2, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_PATA_RESET_B__UART1_CTS = IOMUX_PAD(0x608, 0x288, 3, __NA_, 0, MX53_UART_PAD_CTRL),
+ MX53_PAD_PATA_RESET_B__CAN2_TXCAN = IOMUX_PAD(0x608, 0x288, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 = IOMUX_PAD(0x608, 0x288, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_IORDY__PATA_IORDY = IOMUX_PAD(0x60C, 0x28C, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_IORDY__GPIO7_5 = IOMUX_PAD(0x60C, 0x28C, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_IORDY__ESDHC3_CLK = IOMUX_PAD(0x60C, 0x28C, 2, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_PATA_IORDY__UART1_RTS = IOMUX_PAD(0x60C, 0x28C, 3, 0x874, 3, MX53_UART_PAD_CTRL),
+ MX53_PAD_PATA_IORDY__CAN2_RXCAN = IOMUX_PAD(0x60C, 0x28C, 4, 0x764, 1, NO_PAD_CTRL),
+ MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 = IOMUX_PAD(0x60C, 0x28C, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DA_0__PATA_DA_0 = IOMUX_PAD(0x610, 0x290, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DA_0__GPIO7_6 = IOMUX_PAD(0x610, 0x290, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DA_0__ESDHC3_RST = IOMUX_PAD(0x610, 0x290, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DA_0__OWIRE_LINE = IOMUX_PAD(0x610, 0x290, 4, 0x864, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2 = IOMUX_PAD(0x610, 0x290, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DA_1__PATA_DA_1 = IOMUX_PAD(0x614, 0x294, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DA_1__GPIO7_7 = IOMUX_PAD(0x614, 0x294, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DA_1__ESDHC4_CMD = IOMUX_PAD(0x614, 0x294, 2, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_PATA_DA_1__UART3_CTS = IOMUX_PAD(0x614, 0x294, 4, __NA_, 0, MX53_UART_PAD_CTRL),
+ MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3 = IOMUX_PAD(0x614, 0x294, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DA_2__PATA_DA_2 = IOMUX_PAD(0x618, 0x298, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DA_2__GPIO7_8 = IOMUX_PAD(0x618, 0x298, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DA_2__ESDHC4_CLK = IOMUX_PAD(0x618, 0x298, 2, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_PATA_DA_2__UART3_RTS = IOMUX_PAD(0x618, 0x298, 4, 0x884, 5, MX53_UART_PAD_CTRL),
+ MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4 = IOMUX_PAD(0x618, 0x298, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_CS_0__PATA_CS_0 = IOMUX_PAD(0x61C, 0x29C, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_CS_0__GPIO7_9 = IOMUX_PAD(0x61C, 0x29C, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_CS_0__UART3_TXD_MUX = IOMUX_PAD(0x61C, 0x29C, 4, __NA_, 0, MX53_UART_PAD_CTRL),
+ MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5 = IOMUX_PAD(0x61C, 0x29C, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_CS_1__PATA_CS_1 = IOMUX_PAD(0x620, 0x2A0, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_CS_1__GPIO7_10 = IOMUX_PAD(0x620, 0x2A0, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_CS_1__UART3_RXD_MUX = IOMUX_PAD(0x620, 0x2A0, 4, 0x888, 3, MX53_UART_PAD_CTRL),
+ MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6 = IOMUX_PAD(0x620, 0x2A0, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA0__PATA_DATA_0 = IOMUX_PAD(0x628, 0x2A4, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA0__GPIO2_0 = IOMUX_PAD(0x628, 0x2A4, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 = IOMUX_PAD(0x628, 0x2A4, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA0__ESDHC3_DAT4 = IOMUX_PAD(0x628, 0x2A4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0 = IOMUX_PAD(0x628, 0x2A4, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0 = IOMUX_PAD(0x628, 0x2A4, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7 = IOMUX_PAD(0x628, 0x2A4, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA1__PATA_DATA_1 = IOMUX_PAD(0x62C, 0x2A8, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA1__GPIO2_1 = IOMUX_PAD(0x62C, 0x2A8, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 = IOMUX_PAD(0x62C, 0x2A8, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA1__ESDHC3_DAT5 = IOMUX_PAD(0x62C, 0x2A8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1 = IOMUX_PAD(0x62C, 0x2A8, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1 = IOMUX_PAD(0x62C, 0x2A8, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA2__PATA_DATA_2 = IOMUX_PAD(0x630, 0x2AC, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA2__GPIO2_2 = IOMUX_PAD(0x630, 0x2AC, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 = IOMUX_PAD(0x630, 0x2AC, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA2__ESDHC3_DAT6 = IOMUX_PAD(0x630, 0x2AC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2 = IOMUX_PAD(0x630, 0x2AC, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2 = IOMUX_PAD(0x630, 0x2AC, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA3__PATA_DATA_3 = IOMUX_PAD(0x634, 0x2B0, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA3__GPIO2_3 = IOMUX_PAD(0x634, 0x2B0, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 = IOMUX_PAD(0x634, 0x2B0, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA3__ESDHC3_DAT7 = IOMUX_PAD(0x634, 0x2B0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3 = IOMUX_PAD(0x634, 0x2B0, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3 = IOMUX_PAD(0x634, 0x2B0, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA4__PATA_DATA_4 = IOMUX_PAD(0x638, 0x2B4, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA4__GPIO2_4 = IOMUX_PAD(0x638, 0x2B4, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 = IOMUX_PAD(0x638, 0x2B4, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA4__ESDHC4_DAT4 = IOMUX_PAD(0x638, 0x2B4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4 = IOMUX_PAD(0x638, 0x2B4, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4 = IOMUX_PAD(0x638, 0x2B4, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA5__PATA_DATA_5 = IOMUX_PAD(0x63C, 0x2B8, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA5__GPIO2_5 = IOMUX_PAD(0x63C, 0x2B8, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 = IOMUX_PAD(0x63C, 0x2B8, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA5__ESDHC4_DAT5 = IOMUX_PAD(0x63C, 0x2B8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5 = IOMUX_PAD(0x63C, 0x2B8, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5 = IOMUX_PAD(0x63C, 0x2B8, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA6__PATA_DATA_6 = IOMUX_PAD(0x640, 0x2BC, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA6__GPIO2_6 = IOMUX_PAD(0x640, 0x2BC, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 = IOMUX_PAD(0x640, 0x2BC, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA6__ESDHC4_DAT6 = IOMUX_PAD(0x640, 0x2BC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 = IOMUX_PAD(0x640, 0x2BC, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 = IOMUX_PAD(0x640, 0x2BC, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA7__PATA_DATA_7 = IOMUX_PAD(0x644, 0x2C0, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA7__GPIO2_7 = IOMUX_PAD(0x644, 0x2C0, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 = IOMUX_PAD(0x644, 0x2C0, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA7__ESDHC4_DAT7 = IOMUX_PAD(0x644, 0x2C0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7 = IOMUX_PAD(0x644, 0x2C0, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7 = IOMUX_PAD(0x644, 0x2C0, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA8__PATA_DATA_8 = IOMUX_PAD(0x648, 0x2C4, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA8__GPIO2_8 = IOMUX_PAD(0x648, 0x2C4, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA8__ESDHC1_DAT4 = IOMUX_PAD(0x648, 0x2C4, 2, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_PATA_DATA8__EMI_NANDF_D_8 = IOMUX_PAD(0x648, 0x2C4, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA8__ESDHC3_DAT0 = IOMUX_PAD(0x648, 0x2C4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8 = IOMUX_PAD(0x648, 0x2C4, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8 = IOMUX_PAD(0x648, 0x2C4, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA9__PATA_DATA_9 = IOMUX_PAD(0x64C, 0x2C8, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA9__GPIO2_9 = IOMUX_PAD(0x64C, 0x2C8, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA9__ESDHC1_DAT5 = IOMUX_PAD(0x64C, 0x2C8, 2, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_PATA_DATA9__EMI_NANDF_D_9 = IOMUX_PAD(0x64C, 0x2C8, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA9__ESDHC3_DAT1 = IOMUX_PAD(0x64C, 0x2C8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9 = IOMUX_PAD(0x64C, 0x2C8, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9 = IOMUX_PAD(0x64C, 0x2C8, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA10__PATA_DATA_10 = IOMUX_PAD(0x650, 0x2CC, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA10__GPIO2_10 = IOMUX_PAD(0x650, 0x2CC, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA10__ESDHC1_DAT6 = IOMUX_PAD(0x650, 0x2CC, 2, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_PATA_DATA10__EMI_NANDF_D_10 = IOMUX_PAD(0x650, 0x2CC, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA10__ESDHC3_DAT2 = IOMUX_PAD(0x650, 0x2CC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10 = IOMUX_PAD(0x650, 0x2CC, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10 = IOMUX_PAD(0x650, 0x2CC, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA11__PATA_DATA_11 = IOMUX_PAD(0x654, 0x2D0, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA11__GPIO2_11 = IOMUX_PAD(0x654, 0x2D0, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA11__ESDHC1_DAT7 = IOMUX_PAD(0x654, 0x2D0, 2, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_PATA_DATA11__EMI_NANDF_D_11 = IOMUX_PAD(0x654, 0x2D0, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA11__ESDHC3_DAT3 = IOMUX_PAD(0x654, 0x2D0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11 = IOMUX_PAD(0x654, 0x2D0, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11 = IOMUX_PAD(0x654, 0x2D0, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA12__PATA_DATA_12 = IOMUX_PAD(0x658, 0x2D4, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA12__GPIO2_12 = IOMUX_PAD(0x658, 0x2D4, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA12__ESDHC2_DAT4 = IOMUX_PAD(0x658, 0x2D4, 2, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_PATA_DATA12__EMI_NANDF_D_12 = IOMUX_PAD(0x658, 0x2D4, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA12__ESDHC4_DAT0 = IOMUX_PAD(0x658, 0x2D4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12 = IOMUX_PAD(0x658, 0x2D4, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12 = IOMUX_PAD(0x658, 0x2D4, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA13__PATA_DATA_13 = IOMUX_PAD(0x65C, 0x2D8, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA13__GPIO2_13 = IOMUX_PAD(0x65C, 0x2D8, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA13__ESDHC2_DAT5 = IOMUX_PAD(0x65C, 0x2D8, 2, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_PATA_DATA13__EMI_NANDF_D_13 = IOMUX_PAD(0x65C, 0x2D8, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA13__ESDHC4_DAT1 = IOMUX_PAD(0x65C, 0x2D8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13 = IOMUX_PAD(0x65C, 0x2D8, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13 = IOMUX_PAD(0x65C, 0x2D8, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA14__PATA_DATA_14 = IOMUX_PAD(0x660, 0x2DC, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA14__GPIO2_14 = IOMUX_PAD(0x660, 0x2DC, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA14__ESDHC2_DAT6 = IOMUX_PAD(0x660, 0x2DC, 2, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_PATA_DATA14__EMI_NANDF_D_14 = IOMUX_PAD(0x660, 0x2DC, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA14__ESDHC4_DAT2 = IOMUX_PAD(0x660, 0x2DC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14 = IOMUX_PAD(0x660, 0x2DC, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14 = IOMUX_PAD(0x660, 0x2DC, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA15__PATA_DATA_15 = IOMUX_PAD(0x664, 0x2E0, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA15__GPIO2_15 = IOMUX_PAD(0x664, 0x2E0, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA15__ESDHC2_DAT7 = IOMUX_PAD(0x664, 0x2E0, 2, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_PATA_DATA15__EMI_NANDF_D_15 = IOMUX_PAD(0x664, 0x2E0, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA15__ESDHC4_DAT3 = IOMUX_PAD(0x664, 0x2E0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15 = IOMUX_PAD(0x664, 0x2E0, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15 = IOMUX_PAD(0x664, 0x2E0, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD1_DATA0__ESDHC1_DAT0 = IOMUX_PAD(0x66C, 0x2E4, 0, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_SD1_DATA0__GPIO1_16 = IOMUX_PAD(0x66C, 0x2E4, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD1_DATA0__GPT_CAPIN1 = IOMUX_PAD(0x66C, 0x2E4, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD1_DATA0__CSPI_MISO = IOMUX_PAD(0x66C, 0x2E4, 5, 0x784, 2, NO_PAD_CTRL),
+ MX53_PAD_SD1_DATA0__CCM_PLL3_BYP = IOMUX_PAD(0x66C, 0x2E4, 7, 0x778, 0, NO_PAD_CTRL),
+ MX53_PAD_SD1_DATA1__ESDHC1_DAT1 = IOMUX_PAD(0x670, 0x2E8, 0, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_SD1_DATA1__GPIO1_17 = IOMUX_PAD(0x670, 0x2E8, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD1_DATA1__GPT_CAPIN2 = IOMUX_PAD(0x670, 0x2E8, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD1_DATA1__CSPI_SS0 = IOMUX_PAD(0x670, 0x2E8, 5, 0x78C, 3, NO_PAD_CTRL),
+ MX53_PAD_SD1_DATA1__CCM_PLL4_BYP = IOMUX_PAD(0x670, 0x2E8, 7, 0x77C, 1, NO_PAD_CTRL),
+ MX53_PAD_SD1_CMD__ESDHC1_CMD = IOMUX_PAD(0x674, 0x2EC, 0 | IOMUX_CONFIG_SION, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_SD1_CMD__GPIO1_18 = IOMUX_PAD(0x674, 0x2EC, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD1_CMD__GPT_CMPOUT1 = IOMUX_PAD(0x674, 0x2EC, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD1_CMD__CSPI_MOSI = IOMUX_PAD(0x674, 0x2EC, 5, 0x788, 2, NO_PAD_CTRL),
+ MX53_PAD_SD1_CMD__CCM_PLL1_BYP = IOMUX_PAD(0x674, 0x2EC, 7, 0x770, 0, NO_PAD_CTRL),
+ MX53_PAD_SD1_DATA2__ESDHC1_DAT2 = IOMUX_PAD(0x678, 0x2F0, 0, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_SD1_DATA2__GPIO1_19 = IOMUX_PAD(0x678, 0x2F0, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD1_DATA2__GPT_CMPOUT2 = IOMUX_PAD(0x678, 0x2F0, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD1_DATA2__PWM2_PWMO = IOMUX_PAD(0x678, 0x2F0, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD1_DATA2__WDOG1_WDOG_B = IOMUX_PAD(0x678, 0x2F0, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD1_DATA2__CSPI_SS1 = IOMUX_PAD(0x678, 0x2F0, 5, 0x790, 2, NO_PAD_CTRL),
+ MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB = IOMUX_PAD(0x678, 0x2F0, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD1_DATA2__CCM_PLL2_BYP = IOMUX_PAD(0x678, 0x2F0, 7, 0x774, 0, NO_PAD_CTRL),
+ MX53_PAD_SD1_CLK__ESDHC1_CLK = IOMUX_PAD(0x67C, 0x2F4, 0, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_SD1_CLK__GPIO1_20 = IOMUX_PAD(0x67C, 0x2F4, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD1_CLK__OSC32k_32K_OUT = IOMUX_PAD(0x67C, 0x2F4, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD1_CLK__GPT_CLKIN = IOMUX_PAD(0x67C, 0x2F4, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD1_CLK__CSPI_SCLK = IOMUX_PAD(0x67C, 0x2F4, 5, 0x780, 2, NO_PAD_CTRL),
+ MX53_PAD_SD1_CLK__SATA_PHY_DTB_0 = IOMUX_PAD(0x67C, 0x2F4, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD1_DATA3__ESDHC1_DAT3 = IOMUX_PAD(0x680, 0x2F8, 0, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_SD1_DATA3__GPIO1_21 = IOMUX_PAD(0x680, 0x2F8, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD1_DATA3__GPT_CMPOUT3 = IOMUX_PAD(0x680, 0x2F8, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD1_DATA3__PWM1_PWMO = IOMUX_PAD(0x680, 0x2F8, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD1_DATA3__WDOG2_WDOG_B = IOMUX_PAD(0x680, 0x2F8, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD1_DATA3__CSPI_SS2 = IOMUX_PAD(0x680, 0x2F8, 5, 0x794, 2, NO_PAD_CTRL),
+ MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB = IOMUX_PAD(0x680, 0x2F8, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1 = IOMUX_PAD(0x680, 0x2F8, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD2_CLK__ESDHC2_CLK = IOMUX_PAD(0x688, 0x2FC, 0, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_SD2_CLK__GPIO1_10 = IOMUX_PAD(0x688, 0x2FC, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD2_CLK__KPP_COL_5 = IOMUX_PAD(0x688, 0x2FC, 2, 0x840, 2, NO_PAD_CTRL),
+ MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS = IOMUX_PAD(0x688, 0x2FC, 3, 0x73C, 1, NO_PAD_CTRL),
+ MX53_PAD_SD2_CLK__CSPI_SCLK = IOMUX_PAD(0x688, 0x2FC, 5, 0x780, 3, NO_PAD_CTRL),
+ MX53_PAD_SD2_CLK__SCC_RANDOM_V = IOMUX_PAD(0x688, 0x2FC, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD2_CMD__ESDHC2_CMD = IOMUX_PAD(0x68C, 0x300, 0, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_SD2_CMD__GPIO1_11 = IOMUX_PAD(0x68C, 0x300, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD2_CMD__KPP_ROW_5 = IOMUX_PAD(0x68C, 0x300, 2, 0x84C, 1, NO_PAD_CTRL),
+ MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC = IOMUX_PAD(0x68C, 0x300, 3, 0x738, 1, NO_PAD_CTRL),
+ MX53_PAD_SD2_CMD__CSPI_MOSI = IOMUX_PAD(0x68C, 0x300, 5, 0x788, 3, NO_PAD_CTRL),
+ MX53_PAD_SD2_CMD__SCC_RANDOM = IOMUX_PAD(0x68C, 0x300, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD2_DATA3__ESDHC2_DAT3 = IOMUX_PAD(0x690, 0x304, 0, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_SD2_DATA3__GPIO1_12 = IOMUX_PAD(0x690, 0x304, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD2_DATA3__KPP_COL_6 = IOMUX_PAD(0x690, 0x304, 2, 0x844, 1, NO_PAD_CTRL),
+ MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC = IOMUX_PAD(0x690, 0x304, 3, 0x740, 1, NO_PAD_CTRL),
+ MX53_PAD_SD2_DATA3__CSPI_SS2 = IOMUX_PAD(0x690, 0x304, 5, 0x794, 3, NO_PAD_CTRL),
+ MX53_PAD_SD2_DATA3__SJC_DONE = IOMUX_PAD(0x690, 0x304, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD2_DATA2__ESDHC2_DAT2 = IOMUX_PAD(0x694, 0x308, 0, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_SD2_DATA2__GPIO1_13 = IOMUX_PAD(0x694, 0x308, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD2_DATA2__KPP_ROW_6 = IOMUX_PAD(0x694, 0x308, 2, 0x850, 1, NO_PAD_CTRL),
+ MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD = IOMUX_PAD(0x694, 0x308, 3, 0x734, 1, NO_PAD_CTRL),
+ MX53_PAD_SD2_DATA2__CSPI_SS1 = IOMUX_PAD(0x694, 0x308, 5, 0x790, 3, NO_PAD_CTRL),
+ MX53_PAD_SD2_DATA2__SJC_FAIL = IOMUX_PAD(0x694, 0x308, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD2_DATA1__ESDHC2_DAT1 = IOMUX_PAD(0x698, 0x30C, 0, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_SD2_DATA1__GPIO1_14 = IOMUX_PAD(0x698, 0x30C, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD2_DATA1__KPP_COL_7 = IOMUX_PAD(0x698, 0x30C, 2, 0x848, 1, NO_PAD_CTRL),
+ MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS = IOMUX_PAD(0x698, 0x30C, 3, 0x744, 0, NO_PAD_CTRL),
+ MX53_PAD_SD2_DATA1__CSPI_SS0 = IOMUX_PAD(0x698, 0x30C, 5, 0x78C, 4, NO_PAD_CTRL),
+ MX53_PAD_SD2_DATA1__RTIC_SEC_VIO = IOMUX_PAD(0x698, 0x30C, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD2_DATA0__ESDHC2_DAT0 = IOMUX_PAD(0x69C, 0x310, 0, __NA_, 0, MX53_SDHC_PAD_CTRL),
+ MX53_PAD_SD2_DATA0__GPIO1_15 = IOMUX_PAD(0x69C, 0x310, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_SD2_DATA0__KPP_ROW_7 = IOMUX_PAD(0x69C, 0x310, 2, 0x854, 1, NO_PAD_CTRL),
+ MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD = IOMUX_PAD(0x69C, 0x310, 3, 0x730, 1, NO_PAD_CTRL),
+ MX53_PAD_SD2_DATA0__CSPI_MISO = IOMUX_PAD(0x69C, 0x310, 5, 0x784, 3, NO_PAD_CTRL),
+ MX53_PAD_SD2_DATA0__RTIC_DONE_INT = IOMUX_PAD(0x69C, 0x310, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_0__CCM_CLKO = IOMUX_PAD(0x6A4, 0x314, 0, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_0__GPIO1_0 = IOMUX_PAD(0x6A4, 0x314, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_0__KPP_COL_5 = IOMUX_PAD(0x6A4, 0x314, 2, 0x840, 3, NO_PAD_CTRL),
+ MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK = IOMUX_PAD(0x6A4, 0x314, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_0__EPIT1_EPITO = IOMUX_PAD(0x6A4, 0x314, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_0__SRTC_ALARM_DEB = IOMUX_PAD(0x6A4, 0x314, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_0__USBOH3_USBH1_PWR = IOMUX_PAD(0x6A4, 0x314, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_0__CSU_TD = IOMUX_PAD(0x6A4, 0x314, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_1__ESAI1_SCKR = IOMUX_PAD(0x6A8, 0x318, 0, 0x7DC, 1, NO_PAD_CTRL),
+ MX53_PAD_GPIO_1__GPIO1_1 = IOMUX_PAD(0x6A8, 0x318, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_1__KPP_ROW_5 = IOMUX_PAD(0x6A8, 0x318, 2, 0x84C, 2, NO_PAD_CTRL),
+ MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK = IOMUX_PAD(0x6A8, 0x318, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_1__PWM2_PWMO = IOMUX_PAD(0x6A8, 0x318, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_1__WDOG2_WDOG_B = IOMUX_PAD(0x6A8, 0x318, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_1__ESDHC1_CD = IOMUX_PAD(0x6A8, 0x318, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_1__SRC_TESTER_ACK = IOMUX_PAD(0x6A8, 0x318, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_9__ESAI1_FSR = IOMUX_PAD(0x6AC, 0x31C, 0, 0x7CC, 1, NO_PAD_CTRL),
+ MX53_PAD_GPIO_9__GPIO1_9 = IOMUX_PAD(0x6AC, 0x31C, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_9__KPP_COL_6 = IOMUX_PAD(0x6AC, 0x31C, 2, 0x844, 2, NO_PAD_CTRL),
+ MX53_PAD_GPIO_9__CCM_REF_EN_B = IOMUX_PAD(0x6AC, 0x31C, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_9__PWM1_PWMO = IOMUX_PAD(0x6AC, 0x31C, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_9__WDOG1_WDOG_B = IOMUX_PAD(0x6AC, 0x31C, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_9__ESDHC1_WP = IOMUX_PAD(0x6AC, 0x31C, 6, 0x7FC, 1, NO_PAD_CTRL),
+ MX53_PAD_GPIO_9__SCC_FAIL_STATE = IOMUX_PAD(0x6AC, 0x31C, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_3__ESAI1_HCKR = IOMUX_PAD(0x6B0, 0x320, 0, 0x7D4, 1, NO_PAD_CTRL),
+ MX53_PAD_GPIO_3__GPIO1_3 = IOMUX_PAD(0x6B0, 0x320, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_3__I2C3_SCL = IOMUX_PAD(0x6B0, 0x320, 2 | IOMUX_CONFIG_SION, 0x824, 1, NO_PAD_CTRL),
+ MX53_PAD_GPIO_3__DPLLIP1_TOG_EN = IOMUX_PAD(0x6B0, 0x320, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_3__CCM_CLKO2 = IOMUX_PAD(0x6B0, 0x320, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 = IOMUX_PAD(0x6B0, 0x320, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_3__USBOH3_USBH1_OC = IOMUX_PAD(0x6B0, 0x320, 6, 0x8A0, 1, NO_PAD_CTRL),
+ MX53_PAD_GPIO_3__MLB_MLBCLK = IOMUX_PAD(0x6B0, 0x320, 7, 0x858, 2, NO_PAD_CTRL),
+ MX53_PAD_GPIO_6__ESAI1_SCKT = IOMUX_PAD(0x6B4, 0x324, 0, 0x7E0, 1, NO_PAD_CTRL),
+ MX53_PAD_GPIO_6__GPIO1_6 = IOMUX_PAD(0x6B4, 0x324, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_6__I2C3_SDA = IOMUX_PAD(0x6B4, 0x324, 2 | IOMUX_CONFIG_SION, 0x828, 1, NO_PAD_CTRL),
+ MX53_PAD_GPIO_6__CCM_CCM_OUT_0 = IOMUX_PAD(0x6B4, 0x324, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_6__CSU_CSU_INT_DEB = IOMUX_PAD(0x6B4, 0x324, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 = IOMUX_PAD(0x6B4, 0x324, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_6__ESDHC2_LCTL = IOMUX_PAD(0x6B4, 0x324, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_6__MLB_MLBSIG = IOMUX_PAD(0x6B4, 0x324, 7, 0x860, 2, NO_PAD_CTRL),
+ MX53_PAD_GPIO_2__ESAI1_FST = IOMUX_PAD(0x6B8, 0x328, 0, 0x7D0, 1, NO_PAD_CTRL),
+ MX53_PAD_GPIO_2__GPIO1_2 = IOMUX_PAD(0x6B8, 0x328, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_2__KPP_ROW_6 = IOMUX_PAD(0x6B8, 0x328, 2, 0x850, 2, NO_PAD_CTRL),
+ MX53_PAD_GPIO_2__CCM_CCM_OUT_1 = IOMUX_PAD(0x6B8, 0x328, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 = IOMUX_PAD(0x6B8, 0x328, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2 = IOMUX_PAD(0x6B8, 0x328, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_2__ESDHC2_WP = IOMUX_PAD(0x6B8, 0x328, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_2__MLB_MLBDAT = IOMUX_PAD(0x6B8, 0x328, 7, 0x85C, 2, NO_PAD_CTRL),
+ MX53_PAD_GPIO_4__ESAI1_HCKT = IOMUX_PAD(0x6BC, 0x32C, 0, 0x7D8, 1, NO_PAD_CTRL),
+ MX53_PAD_GPIO_4__GPIO1_4 = IOMUX_PAD(0x6BC, 0x32C, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_4__KPP_COL_7 = IOMUX_PAD(0x6BC, 0x32C, 2, 0x848, 2, NO_PAD_CTRL),
+ MX53_PAD_GPIO_4__CCM_CCM_OUT_2 = IOMUX_PAD(0x6BC, 0x32C, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 = IOMUX_PAD(0x6BC, 0x32C, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3 = IOMUX_PAD(0x6BC, 0x32C, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_4__ESDHC2_CD = IOMUX_PAD(0x6BC, 0x32C, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_4__SCC_SEC_STATE = IOMUX_PAD(0x6BC, 0x32C, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_5__ESAI1_TX2_RX3 = IOMUX_PAD(0x6C0, 0x330, 0, 0x7EC, 1, NO_PAD_CTRL),
+ MX53_PAD_GPIO_5__GPIO1_5 = IOMUX_PAD(0x6C0, 0x330, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_5__KPP_ROW_7 = IOMUX_PAD(0x6C0, 0x330, 2, 0x854, 2, NO_PAD_CTRL),
+ MX53_PAD_GPIO_5__CCM_CLKO = IOMUX_PAD(0x6C0, 0x330, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 = IOMUX_PAD(0x6C0, 0x330, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 = IOMUX_PAD(0x6C0, 0x330, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_5__I2C3_SCL = IOMUX_PAD(0x6C0, 0x330, 6 | IOMUX_CONFIG_SION, 0x824, 2, NO_PAD_CTRL),
+ MX53_PAD_GPIO_5__CCM_PLL1_BYP = IOMUX_PAD(0x6C0, 0x330, 7, 0x770, 1, NO_PAD_CTRL),
+ MX53_PAD_GPIO_7__ESAI1_TX4_RX1 = IOMUX_PAD(0x6C4, 0x334, 0, 0x7F4, 1, NO_PAD_CTRL),
+ MX53_PAD_GPIO_7__GPIO1_7 = IOMUX_PAD(0x6C4, 0x334, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_7__EPIT1_EPITO = IOMUX_PAD(0x6C4, 0x334, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_7__CAN1_TXCAN = IOMUX_PAD(0x6C4, 0x334, 3, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_7__UART2_TXD_MUX = IOMUX_PAD(0x6C4, 0x334, 4, __NA_, 0, MX53_UART_PAD_CTRL),
+ MX53_PAD_GPIO_7__FIRI_RXD = IOMUX_PAD(0x6C4, 0x334, 5, 0x80C, 1, NO_PAD_CTRL),
+ MX53_PAD_GPIO_7__SPDIF_PLOCK = IOMUX_PAD(0x6C4, 0x334, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_7__CCM_PLL2_BYP = IOMUX_PAD(0x6C4, 0x334, 7, 0x774, 1, NO_PAD_CTRL),
+ MX53_PAD_GPIO_8__ESAI1_TX5_RX0 = IOMUX_PAD(0x6C8, 0x338, 0, 0x7F8, 1, NO_PAD_CTRL),
+ MX53_PAD_GPIO_8__GPIO1_8 = IOMUX_PAD(0x6C8, 0x338, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_8__EPIT2_EPITO = IOMUX_PAD(0x6C8, 0x338, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_8__CAN1_RXCAN = IOMUX_PAD(0x6C8, 0x338, 3, 0x760, 3, NO_PAD_CTRL),
+ MX53_PAD_GPIO_8__UART2_RXD_MUX = IOMUX_PAD(0x6C8, 0x338, 4, 0x880, 5, MX53_UART_PAD_CTRL),
+ MX53_PAD_GPIO_8__FIRI_TXD = IOMUX_PAD(0x6C8, 0x338, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_8__SPDIF_SRCLK = IOMUX_PAD(0x6C8, 0x338, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_8__CCM_PLL3_BYP = IOMUX_PAD(0x6C8, 0x338, 7, 0x778, 1, NO_PAD_CTRL),
+ MX53_PAD_GPIO_16__ESAI1_TX3_RX2 = IOMUX_PAD(0x6CC, 0x33C, 0, 0x7F0, 1, NO_PAD_CTRL),
+ MX53_PAD_GPIO_16__GPIO7_11 = IOMUX_PAD(0x6CC, 0x33C, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT = IOMUX_PAD(0x6CC, 0x33C, 2, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 = IOMUX_PAD(0x6CC, 0x33C, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_16__SPDIF_IN1 = IOMUX_PAD(0x6CC, 0x33C, 5, 0x870, 1, NO_PAD_CTRL),
+ MX53_PAD_GPIO_16__I2C3_SDA = IOMUX_PAD(0x6CC, 0x33C, 6 | IOMUX_CONFIG_SION, 0x828, 2, NO_PAD_CTRL),
+ MX53_PAD_GPIO_16__SJC_DE_B = IOMUX_PAD(0x6CC, 0x33C, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_17__ESAI1_TX0 = IOMUX_PAD(0x6D0, 0x340, 0, 0x7E4, 1, NO_PAD_CTRL),
+ MX53_PAD_GPIO_17__GPIO7_12 = IOMUX_PAD(0x6D0, 0x340, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0 = IOMUX_PAD(0x6D0, 0x340, 2, 0x868, 1, NO_PAD_CTRL),
+ MX53_PAD_GPIO_17__GPC_PMIC_RDY = IOMUX_PAD(0x6D0, 0x340, 3, 0x810, 1, NO_PAD_CTRL),
+ MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG = IOMUX_PAD(0x6D0, 0x340, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_17__SPDIF_OUT1 = IOMUX_PAD(0x6D0, 0x340, 5, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_17__IPU_SNOOP2 = IOMUX_PAD(0x6D0, 0x340, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_17__SJC_JTAG_ACT = IOMUX_PAD(0x6D0, 0x340, 7, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_18__ESAI1_TX1 = IOMUX_PAD(0x6D4, 0x344, 0, 0x7E8, 1, NO_PAD_CTRL),
+ MX53_PAD_GPIO_18__GPIO7_13 = IOMUX_PAD(0x6D4, 0x344, 1, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1 = IOMUX_PAD(0x6D4, 0x344, 2, 0x86C, 1, NO_PAD_CTRL),
+ MX53_PAD_GPIO_18__OWIRE_LINE = IOMUX_PAD(0x6D4, 0x344, 3, 0x864, 1, NO_PAD_CTRL),
+ MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG = IOMUX_PAD(0x6D4, 0x344, 4, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK = IOMUX_PAD(0x6D4, 0x344, 5, 0x768, 1, NO_PAD_CTRL),
+ MX53_PAD_GPIO_18__ESDHC1_LCTL = IOMUX_PAD(0x6D4, 0x344, 6, __NA_, 0, NO_PAD_CTRL),
+ MX53_PAD_GPIO_18__SRC_SYSTEM_RST = IOMUX_PAD(0x6D4, 0x344, 7, __NA_, 0, NO_PAD_CTRL),
+};
+
+#endif /* __IOMUX_MX53_H__ */
diff --git a/arch/arm/include/asm/arch-mx5/iomux.h b/arch/arm/include/asm/arch-mx5/iomux.h
deleted file mode 100644
index e3765a3..0000000
--- a/arch/arm/include/asm/arch-mx5/iomux.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __MACH_MX5_IOMUX_H__
-#define __MACH_MX5_IOMUX_H__
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/mx5x_pins.h>
-
-typedef unsigned int iomux_pin_name_t;
-
-/* various IOMUX output functions */
-typedef enum iomux_config {
- IOMUX_CONFIG_ALT0, /*!< used as alternate function 0 */
- IOMUX_CONFIG_ALT1, /*!< used as alternate function 1 */
- IOMUX_CONFIG_ALT2, /*!< used as alternate function 2 */
- IOMUX_CONFIG_ALT3, /*!< used as alternate function 3 */
- IOMUX_CONFIG_ALT4, /*!< used as alternate function 4 */
- IOMUX_CONFIG_ALT5, /*!< used as alternate function 5 */
- IOMUX_CONFIG_ALT6, /*!< used as alternate function 6 */
- IOMUX_CONFIG_ALT7, /*!< used as alternate function 7 */
- IOMUX_CONFIG_GPIO, /*!< added to help user use GPIO mode */
- IOMUX_CONFIG_SION = 0x1 << 4, /*!< used as LOOPBACK:MUX SION bit */
-} iomux_pin_cfg_t;
-
-/* various IOMUX pad functions */
-typedef enum iomux_pad_config {
- PAD_CTL_SRE_SLOW = 0x0 << 0, /* Slow slew rate */
- PAD_CTL_SRE_FAST = 0x1 << 0, /* Fast slew rate */
- PAD_CTL_DRV_LOW = 0x0 << 1, /* Low drive strength */
- PAD_CTL_DRV_MEDIUM = 0x1 << 1, /* Medium drive strength */
- PAD_CTL_DRV_HIGH = 0x2 << 1, /* High drive strength */
- PAD_CTL_DRV_MAX = 0x3 << 1, /* Max drive strength */
- PAD_CTL_ODE_OPENDRAIN_NONE = 0x0 << 3, /* Opendrain disable */
- PAD_CTL_ODE_OPENDRAIN_ENABLE = 0x1 << 3,/* Opendrain enable */
- PAD_CTL_100K_PD = 0x0 << 4, /* 100Kohm pulldown */
- PAD_CTL_47K_PU = 0x1 << 4, /* 47Kohm pullup */
- PAD_CTL_100K_PU = 0x2 << 4, /* 100Kohm pullup */
- PAD_CTL_22K_PU = 0x3 << 4, /* 22Kohm pullup */
- PAD_CTL_PUE_KEEPER = 0x0 << 6, /* enable pulldown */
- PAD_CTL_PUE_PULL = 0x1 << 6, /* enable pullup */
- PAD_CTL_PKE_NONE = 0x0 << 7, /* Disable pullup/pulldown */
- PAD_CTL_PKE_ENABLE = 0x1 << 7, /* Enable pullup/pulldown */
- PAD_CTL_HYS_NONE = 0x0 << 8, /* Hysteresis disabled */
- PAD_CTL_HYS_ENABLE = 0x1 << 8, /* Hysteresis enabled */
- PAD_CTL_DDR_INPUT_CMOS = 0x0 << 9,/* DDR input CMOS */
- PAD_CTL_DDR_INPUT_DDR = 0x1 << 9,/* DDR input DDR */
- PAD_CTL_DRV_VOT_LOW = 0x1 << 13, /* Low voltage mode */
- PAD_CTL_DRV_VOT_HIGH = 0x0 << 13,/* High voltage mode */
-} iomux_pad_config_t;
-
-/* various IOMUX input functions */
-typedef enum iomux_input_config {
- INPUT_CTL_PATH0 = 0x0,
- INPUT_CTL_PATH1,
- INPUT_CTL_PATH2,
- INPUT_CTL_PATH3,
- INPUT_CTL_PATH4,
- INPUT_CTL_PATH5,
- INPUT_CTL_PATH6,
- INPUT_CTL_PATH7,
-} iomux_input_config_t;
-
-void mxc_request_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t config);
-void mxc_free_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t config);
-void mxc_iomux_set_pad(iomux_pin_name_t pin, u32 config);
-unsigned int mxc_iomux_get_pad(iomux_pin_name_t pin);
-void mxc_iomux_set_input(iomux_input_select_t input, u32 config);
-
-#endif /* __MACH_MX5_IOMUX_H__ */
diff --git a/arch/arm/include/asm/arch-mx5/mx5x_pins.h b/arch/arm/include/asm/arch-mx5/mx5x_pins.h
deleted file mode 100644
index 3457f6a..0000000
--- a/arch/arm/include/asm/arch-mx5/mx5x_pins.h
+++ /dev/null
@@ -1,879 +0,0 @@
-/*
- * (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_MX5_MX5X_PINS_H__
-#define __ASM_ARCH_MX5_MX5X_PINS_H__
-
-#ifndef __ASSEMBLY__
-
-/*
- * In order to identify pins more effectively, each mux-controlled pin's
- * enumerated value is constructed in the following way:
- *
- * -------------------------------------------------------------------
- * 31-29 | 28 - 24 | 23 - 21 | 20 - 10| 9 - 0
- * -------------------------------------------------------------------
- * IO_P | IO_I | GPIO_I | PAD_I | MUX_I
- * -------------------------------------------------------------------
- *
- * Bit 0 to 9 contains MUX_I used to identify the register
- * offset (0-based. base is IOMUX_module_base) defined in the Section
- * "sw_pad_ctl & sw_mux_ctl details" of the IC Spec. The
- * similar field definitions are used for the pad control register.
- * The IOMUX controller can be split in two parts. At the begeinning,
- * there is the register definitions for the multiplexing each pin.
- * Then there is a set of registers (PAD_I) to configure each pin
- * (pullup, pulldown, etc).
- * PAD_I defines the offset of the pad register for each pin.
- * GPIO_I defines, if available, the number of gpio that can be
- * connected to that pad
- * IO_I defines the multiplexer mode required to set the pad in gpio mode
- * IO_P defines the gpio structure (gpio1..gpio4) the pad belongs
- *
- * For example, the MX51_PIN_ETM_D0 is defined in the enumeration:
- * ( (0x28 - MUX_I_START) << MUX_I)|( (0x250 - PAD_I_START) << PAD_I)
- * It means the mux control register is at register offset 0x28. The pad control
- * register offset is: 0x250 and also occupy the least significant bits
- * within the register.
- */
-
-/*!
- * Starting bit position within each entry of \b iomux_pins to represent the
- * MUX control register offset
- */
-#define MUX_I 0
-/*!
- * Starting bit position within each entry of \b iomux_pins to represent the
- * PAD control register offset
- */
-#define PAD_I 10
-/*!
- * Starting bit position within each entry of \b iomux_pins to represent which
- * mux mode is for GPIO (0-based)
- */
-#define GPIO_I 21
-
-#define MUX_IO_P 29
-#define MUX_IO_I 24
-#define IOMUX_TO_GPIO(pin) ((((unsigned int)pin >> MUX_IO_P) * \
- GPIO_NUM_PIN) + ((pin >> MUX_IO_I) &\
- ((1 << (MUX_IO_P - MUX_IO_I)) - 1)))
-#define IOMUX_TO_IRQ(pin) (MXC_GPIO_INT_BASE + IOMUX_TO_GPIO(pin))
-
-#define NON_GPIO_PORT 0x7
-#define PIN_TO_MUX_MASK ((1 << (PAD_I - MUX_I)) - 1)
-#define PIN_TO_PAD_MASK ((1 << (GPIO_I - PAD_I)) - 1)
-#define PIN_TO_ALT_GPIO_MASK ((1 << (MUX_IO_I - GPIO_I)) - 1)
-
-#define NON_MUX_I PIN_TO_MUX_MASK
-#define NON_PAD_I PIN_TO_PAD_MASK
-
-#if defined(CONFIG_MX51)
-#define MUX_I_START 0x001C
-#define PAD_I_START 0x3F0
-#define INPUT_CTL_START 0x8C4
-#define MUX_I_END (PAD_I_START - 4)
-#elif defined(CONFIG_MX53)
-#define MUX_I_START 0x0020
-#define PAD_I_START 0x348
-#define INPUT_CTL_START 0x730
-#define MUX_I_END (PAD_I_START - 4)
-#else
-#error "CPU_TYPE not defined"
-#endif
-
-#define _MXC_BUILD_PIN(gp, gi, ga, mi, pi) \
- (((gp) << MUX_IO_P) | ((gi) << MUX_IO_I) | \
- ((mi) << MUX_I) | \
- ((pi - PAD_I_START) << PAD_I) | \
- ((ga) << GPIO_I))
-
-#define _MXC_BUILD_GPIO_PIN(gp, gi, ga, mi, pi) \
- _MXC_BUILD_PIN(gp, gi, ga, mi, pi)
-
-#define _MXC_BUILD_NON_GPIO_PIN(mi, pi) \
- _MXC_BUILD_PIN(NON_GPIO_PORT, 0, 0, mi, pi)
-
-#define PIN_TO_IOMUX_MUX(pin) ((pin >> MUX_I) & PIN_TO_MUX_MASK)
-#define PIN_TO_IOMUX_PAD(pin) ((pin >> PAD_I) & PIN_TO_PAD_MASK)
-#define PIN_TO_ALT_GPIO(pin) ((pin >> GPIO_I) & PIN_TO_ALT_GPIO_MASK)
-#define PIN_TO_IOMUX_INDEX(pin) (PIN_TO_IOMUX_MUX(pin) >> 2)
-
-/*
- * This enumeration is constructed based on the Section
- * "sw_pad_ctl & sw_mux_ctl details" of the MX51 IC Spec. Each enumerated
- * value is constructed based on the rules described above.
- */
-enum {
- MX51_PIN_EIM_DA0 = _MXC_BUILD_NON_GPIO_PIN(0x1C, 0x7A8),
- MX51_PIN_EIM_DA1 = _MXC_BUILD_NON_GPIO_PIN(0x20, 0x7A8),
- MX51_PIN_EIM_DA2 = _MXC_BUILD_NON_GPIO_PIN(0x24, 0x7A8),
- MX51_PIN_EIM_DA3 = _MXC_BUILD_NON_GPIO_PIN(0x28, 0x7A8),
- MX51_PIN_EIM_DA4 = _MXC_BUILD_NON_GPIO_PIN(0x2C, 0x7AC),
- MX51_PIN_EIM_DA5 = _MXC_BUILD_NON_GPIO_PIN(0x30, 0x7AC),
- MX51_PIN_EIM_DA6 = _MXC_BUILD_NON_GPIO_PIN(0x34, 0x7AC),
- MX51_PIN_EIM_DA7 = _MXC_BUILD_NON_GPIO_PIN(0x38, 0x7AC),
- MX51_PIN_EIM_DA8 = _MXC_BUILD_NON_GPIO_PIN(0x3C, 0x7B0),
- MX51_PIN_EIM_DA9 = _MXC_BUILD_NON_GPIO_PIN(0x40, 0x7B0),
- MX51_PIN_EIM_DA10 = _MXC_BUILD_NON_GPIO_PIN(0x44, 0x7B0),
- MX51_PIN_EIM_DA11 = _MXC_BUILD_NON_GPIO_PIN(0x48, 0x7B0),
- MX51_PIN_EIM_DA12 = _MXC_BUILD_NON_GPIO_PIN(0x4C, 0x7BC),
- MX51_PIN_EIM_DA13 = _MXC_BUILD_NON_GPIO_PIN(0x50, 0x7BC),
- MX51_PIN_EIM_DA14 = _MXC_BUILD_NON_GPIO_PIN(0x54, 0x7BC),
- MX51_PIN_EIM_DA15 = _MXC_BUILD_NON_GPIO_PIN(0x58, 0x7BC),
- MX51_PIN_EIM_D16 = _MXC_BUILD_GPIO_PIN(1, 0, 1, 0x5C, 0x3F0),
- MX51_PIN_EIM_D17 = _MXC_BUILD_GPIO_PIN(1, 1, 1, 0x60, 0x3F4),
- MX51_PIN_EIM_D18 = _MXC_BUILD_GPIO_PIN(1, 2, 1, 0x64, 0x3F8),
- MX51_PIN_EIM_D19 = _MXC_BUILD_GPIO_PIN(1, 3, 1, 0x68, 0x3FC),
- MX51_PIN_EIM_D20 = _MXC_BUILD_GPIO_PIN(1, 4, 1, 0x6C, 0x400),
- MX51_PIN_EIM_D21 = _MXC_BUILD_GPIO_PIN(1, 5, 1, 0x70, 0x404),
- MX51_PIN_EIM_D22 = _MXC_BUILD_GPIO_PIN(1, 6, 1, 0x74, 0x408),
- MX51_PIN_EIM_D23 = _MXC_BUILD_GPIO_PIN(1, 7, 1, 0x78, 0x40C),
- MX51_PIN_EIM_D24 = _MXC_BUILD_GPIO_PIN(1, 8, 1, 0x7C, 0x410),
- MX51_PIN_EIM_D25 = _MXC_BUILD_NON_GPIO_PIN(0x80, 0x414),
- MX51_PIN_EIM_D26 = _MXC_BUILD_NON_GPIO_PIN(0x84, 0x418),
- MX51_PIN_EIM_D27 = _MXC_BUILD_GPIO_PIN(1, 9, 1, 0x88, 0x41C),
- MX51_PIN_EIM_D28 = _MXC_BUILD_NON_GPIO_PIN(0x8C, 0x420),
- MX51_PIN_EIM_D29 = _MXC_BUILD_NON_GPIO_PIN(0x90, 0x424),
- MX51_PIN_EIM_D30 = _MXC_BUILD_NON_GPIO_PIN(0x94, 0x428),
- MX51_PIN_EIM_D31 = _MXC_BUILD_NON_GPIO_PIN(0x98, 0x42C),
- MX51_PIN_EIM_A16 = _MXC_BUILD_GPIO_PIN(1, 10, 1, 0x9C, 0x430),
- MX51_PIN_EIM_A17 = _MXC_BUILD_GPIO_PIN(1, 11, 1, 0xA0, 0x434),
- MX51_PIN_EIM_A18 = _MXC_BUILD_GPIO_PIN(1, 12, 1, 0xA4, 0x438),
- MX51_PIN_EIM_A19 = _MXC_BUILD_GPIO_PIN(1, 13, 1, 0xA8, 0x43C),
- MX51_PIN_EIM_A20 = _MXC_BUILD_GPIO_PIN(1, 14, 1, 0xAC, 0x440),
- MX51_PIN_EIM_A21 = _MXC_BUILD_GPIO_PIN(1, 15, 1, 0xB0, 0x444),
- MX51_PIN_EIM_A22 = _MXC_BUILD_GPIO_PIN(1, 16, 1, 0xB4, 0x448),
- MX51_PIN_EIM_A23 = _MXC_BUILD_GPIO_PIN(1, 17, 1, 0xB8, 0x44C),
- MX51_PIN_EIM_A24 = _MXC_BUILD_GPIO_PIN(1, 18, 1, 0xBC, 0x450),
- MX51_PIN_EIM_A25 = _MXC_BUILD_GPIO_PIN(1, 19, 1, 0xC0, 0x454),
- MX51_PIN_EIM_A26 = _MXC_BUILD_GPIO_PIN(1, 20, 1, 0xC4, 0x458),
- MX51_PIN_EIM_A27 = _MXC_BUILD_GPIO_PIN(1, 21, 1, 0xC8, 0x45C),
- MX51_PIN_EIM_EB0 = _MXC_BUILD_NON_GPIO_PIN(0xCC, 0x460),
- MX51_PIN_EIM_EB1 = _MXC_BUILD_NON_GPIO_PIN(0xD0, 0x464),
- MX51_PIN_EIM_EB2 = _MXC_BUILD_GPIO_PIN(1, 22, 1, 0xD4, 0x468),
- MX51_PIN_EIM_EB3 = _MXC_BUILD_GPIO_PIN(1, 23, 1, 0xD8, 0x46C),
- MX51_PIN_EIM_OE = _MXC_BUILD_GPIO_PIN(1, 24, 1, 0xDC, 0x470),
- MX51_PIN_EIM_CS0 = _MXC_BUILD_GPIO_PIN(1, 25, 1, 0xE0, 0x474),
- MX51_PIN_EIM_CS1 = _MXC_BUILD_GPIO_PIN(1, 26, 1, 0xE4, 0x478),
- MX51_PIN_EIM_CS2 = _MXC_BUILD_GPIO_PIN(1, 27, 1, 0xE8, 0x47C),
- MX51_PIN_EIM_CS3 = _MXC_BUILD_GPIO_PIN(1, 28, 1, 0xEC, 0x480),
- MX51_PIN_EIM_CS4 = _MXC_BUILD_GPIO_PIN(1, 29, 1, 0xF0, 0x484),
- MX51_PIN_EIM_CS5 = _MXC_BUILD_GPIO_PIN(1, 30, 1, 0xF4, 0x488),
- MX51_PIN_EIM_DTACK = _MXC_BUILD_GPIO_PIN(1, 31, 1, 0xF8, 0x48C),
- MX51_PIN_EIM_LBA = _MXC_BUILD_GPIO_PIN(2, 1, 1, 0xFC, 0x494),
- MX51_PIN_EIM_CRE = _MXC_BUILD_GPIO_PIN(2, 2, 1, 0x100, 0x4A0),
- MX51_PIN_DRAM_CS1 = _MXC_BUILD_NON_GPIO_PIN(0x104, 0x4D0),
- MX51_PIN_NANDF_WE_B = _MXC_BUILD_GPIO_PIN(2, 3, 3, 0x108, 0x4E4),
- MX51_PIN_NANDF_RE_B = _MXC_BUILD_GPIO_PIN(2, 4, 3, 0x10C, 0x4E8),
- MX51_PIN_NANDF_ALE = _MXC_BUILD_GPIO_PIN(2, 5, 3, 0x110, 0x4EC),
- MX51_PIN_NANDF_CLE = _MXC_BUILD_GPIO_PIN(2, 6, 3, 0x114, 0x4F0),
- MX51_PIN_NANDF_WP_B = _MXC_BUILD_GPIO_PIN(2, 7, 3, 0x118, 0x4F4),
- MX51_PIN_NANDF_RB0 = _MXC_BUILD_GPIO_PIN(2, 8, 3, 0x11C, 0x4F8),
- MX51_PIN_NANDF_RB1 = _MXC_BUILD_GPIO_PIN(2, 9, 3, 0x120, 0x4FC),
- MX51_PIN_NANDF_RB2 = _MXC_BUILD_GPIO_PIN(2, 10, 3, 0x124, 0x500),
- MX51_PIN_NANDF_RB3 = _MXC_BUILD_GPIO_PIN(2, 11, 3, 0x128, 0x504),
- MX51_PIN_GPIO_NAND = _MXC_BUILD_GPIO_PIN(2, 12, 3, 0x12C, 0x514),
- MX51_PIN_NANDF_RB4 = MX51_PIN_GPIO_NAND,
- MX51_PIN_NANDF_RB5 = _MXC_BUILD_GPIO_PIN(2, 13, 3, 0x130, 0x5D8),
- MX51_PIN_NANDF_RB6 = _MXC_BUILD_GPIO_PIN(2, 14, 3, 0x134, 0x5DC),
- MX51_PIN_NANDF_RB7 = _MXC_BUILD_GPIO_PIN(2, 15, 3, 0x138, 0x5E0),
- MX51_PIN_NANDF_CS0 = _MXC_BUILD_GPIO_PIN(2, 16, 3, 0x130, 0x518),
- MX51_PIN_NANDF_CS1 = _MXC_BUILD_GPIO_PIN(2, 17, 3, 0x134, 0x51C),
- MX51_PIN_NANDF_CS2 = _MXC_BUILD_GPIO_PIN(2, 18, 3, 0x138, 0x520),
- MX51_PIN_NANDF_CS3 = _MXC_BUILD_GPIO_PIN(2, 19, 3, 0x13C, 0x524),
- MX51_PIN_NANDF_CS4 = _MXC_BUILD_GPIO_PIN(2, 20, 3, 0x140, 0x528),
- MX51_PIN_NANDF_CS5 = _MXC_BUILD_GPIO_PIN(2, 21, 3, 0x144, 0x52C),
- MX51_PIN_NANDF_CS6 = _MXC_BUILD_GPIO_PIN(2, 22, 3, 0x148, 0x530),
- MX51_PIN_NANDF_CS7 = _MXC_BUILD_GPIO_PIN(2, 23, 3, 0x14C, 0x534),
- MX51_PIN_NANDF_RDY_INT = _MXC_BUILD_GPIO_PIN(2, 24, 3, 0x150, 0x538),
- MX51_PIN_NANDF_D15 = _MXC_BUILD_GPIO_PIN(2, 25, 3, 0x154, 0x53C),
- MX51_PIN_NANDF_D14 = _MXC_BUILD_GPIO_PIN(2, 26, 3, 0x158, 0x540),
- MX51_PIN_NANDF_D13 = _MXC_BUILD_GPIO_PIN(2, 27, 3, 0x15C, 0x544),
- MX51_PIN_NANDF_D12 = _MXC_BUILD_GPIO_PIN(2, 28, 3, 0x160, 0x548),
- MX51_PIN_NANDF_D11 = _MXC_BUILD_GPIO_PIN(2, 29, 3, 0x164, 0x54C),
- MX51_PIN_NANDF_D10 = _MXC_BUILD_GPIO_PIN(2, 30, 3, 0x168, 0x550),
- MX51_PIN_NANDF_D9 = _MXC_BUILD_GPIO_PIN(2, 31, 3, 0x16C, 0x554),
- MX51_PIN_NANDF_D8 = _MXC_BUILD_GPIO_PIN(3, 0, 3, 0x170, 0x558),
- MX51_PIN_NANDF_D7 = _MXC_BUILD_GPIO_PIN(3, 1, 3, 0x174, 0x55C),
- MX51_PIN_NANDF_D6 = _MXC_BUILD_GPIO_PIN(3, 2, 3, 0x178, 0x560),
- MX51_PIN_NANDF_D5 = _MXC_BUILD_GPIO_PIN(3, 3, 3, 0x17C, 0x564),
- MX51_PIN_NANDF_D4 = _MXC_BUILD_GPIO_PIN(3, 4, 3, 0x180, 0x568),
- MX51_PIN_NANDF_D3 = _MXC_BUILD_GPIO_PIN(3, 5, 3, 0x184, 0x56C),
- MX51_PIN_NANDF_D2 = _MXC_BUILD_GPIO_PIN(3, 6, 3, 0x188, 0x570),
- MX51_PIN_NANDF_D1 = _MXC_BUILD_GPIO_PIN(3, 7, 3, 0x18C, 0x574),
- MX51_PIN_NANDF_D0 = _MXC_BUILD_GPIO_PIN(3, 8, 3, 0x190, 0x578),
- MX51_PIN_CSI1_D8 = _MXC_BUILD_GPIO_PIN(2, 12, 3, 0x194, 0x57C),
- MX51_PIN_CSI1_D9 = _MXC_BUILD_GPIO_PIN(2, 13, 3, 0x198, 0x580),
- MX51_PIN_CSI1_D10 = _MXC_BUILD_NON_GPIO_PIN(0x19C, 0x584),
- MX51_PIN_CSI1_D11 = _MXC_BUILD_NON_GPIO_PIN(0x1A0, 0x588),
- MX51_PIN_CSI1_D12 = _MXC_BUILD_NON_GPIO_PIN(0x1A4, 0x58C),
- MX51_PIN_CSI1_D13 = _MXC_BUILD_NON_GPIO_PIN(0x1A8, 0x590),
- MX51_PIN_CSI1_D14 = _MXC_BUILD_NON_GPIO_PIN(0x1AC, 0x594),
- MX51_PIN_CSI1_D15 = _MXC_BUILD_NON_GPIO_PIN(0x1B0, 0x598),
- MX51_PIN_CSI1_D16 = _MXC_BUILD_NON_GPIO_PIN(0x1B4, 0x59C),
- MX51_PIN_CSI1_D17 = _MXC_BUILD_NON_GPIO_PIN(0x1B8, 0x5A0),
- MX51_PIN_CSI1_D18 = _MXC_BUILD_NON_GPIO_PIN(0x1BC, 0x5A4),
- MX51_PIN_CSI1_D19 = _MXC_BUILD_NON_GPIO_PIN(0x1C0, 0x5A8),
- MX51_PIN_CSI1_VSYNC = _MXC_BUILD_NON_GPIO_PIN(0x1C4, 0x5AC),
- MX51_PIN_CSI1_HSYNC = _MXC_BUILD_NON_GPIO_PIN(0x1C8, 0x5B0),
- MX51_PIN_CSI1_PIXCLK = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x5B4),
- MX51_PIN_CSI1_MCLK = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x5B8),
- MX51_PIN_CSI1_PKE0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x860),
- MX51_PIN_CSI2_D12 = _MXC_BUILD_GPIO_PIN(3, 9, 3, 0x1CC, 0x5BC),
- MX51_PIN_CSI2_D13 = _MXC_BUILD_GPIO_PIN(3, 10, 3, 0x1D0, 0x5C0),
- MX51_PIN_CSI2_D14 = _MXC_BUILD_GPIO_PIN(3, 11, 3, 0x1D4, 0x5C4),
- MX51_PIN_CSI2_D15 = _MXC_BUILD_GPIO_PIN(3, 12, 3, 0x1D8, 0x5C8),
- MX51_PIN_CSI2_D16 = _MXC_BUILD_GPIO_PIN(3, 11, 3, 0x1DC, 0x5CC),
- MX51_PIN_CSI2_D17 = _MXC_BUILD_GPIO_PIN(3, 12, 3, 0x1E0, 0x5D0),
- MX51_PIN_CSI2_D18 = _MXC_BUILD_GPIO_PIN(3, 11, 3, 0x1E4, 0x5D4),
- MX51_PIN_CSI2_D19 = _MXC_BUILD_GPIO_PIN(3, 12, 3, 0x1E8, 0x5D8),
- MX51_PIN_CSI2_VSYNC = _MXC_BUILD_GPIO_PIN(3, 13, 3, 0x1EC, 0x5DC),
- MX51_PIN_CSI2_HSYNC = _MXC_BUILD_GPIO_PIN(3, 14, 3, 0x1F0, 0x5E0),
- MX51_PIN_CSI2_PIXCLK = _MXC_BUILD_GPIO_PIN(3, 15, 3, 0x1F4, 0x5E4),
- MX51_PIN_CSI2_PKE0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x81C),
- MX51_PIN_I2C1_CLK = _MXC_BUILD_GPIO_PIN(3, 16, 3, 0x1F8, 0x5E8),
- MX51_PIN_I2C1_DAT = _MXC_BUILD_GPIO_PIN(3, 17, 3, 0x1FC, 0x5EC),
- MX51_PIN_AUD3_BB_TXD = _MXC_BUILD_GPIO_PIN(3, 18, 3, 0x200, 0x5F0),
- MX51_PIN_AUD3_BB_RXD = _MXC_BUILD_GPIO_PIN(3, 19, 3, 0x204, 0x5F4),
- MX51_PIN_AUD3_BB_CK = _MXC_BUILD_GPIO_PIN(3, 20, 3, 0x208, 0x5F8),
- MX51_PIN_AUD3_BB_FS = _MXC_BUILD_GPIO_PIN(3, 21, 3, 0x20C, 0x5FC),
- MX51_PIN_CSPI1_MOSI = _MXC_BUILD_GPIO_PIN(3, 22, 3, 0x210, 0x600),
- MX51_PIN_CSPI1_MISO = _MXC_BUILD_GPIO_PIN(3, 23, 3, 0x214, 0x604),
- MX51_PIN_CSPI1_SS0 = _MXC_BUILD_GPIO_PIN(3, 24, 3, 0x218, 0x608),
- MX51_PIN_CSPI1_SS1 = _MXC_BUILD_GPIO_PIN(3, 25, 3, 0x21C, 0x60C),
- MX51_PIN_CSPI1_RDY = _MXC_BUILD_GPIO_PIN(3, 26, 3, 0x220, 0x610),
- MX51_PIN_CSPI1_SCLK = _MXC_BUILD_GPIO_PIN(3, 27, 3, 0x224, 0x614),
- MX51_PIN_UART1_RXD = _MXC_BUILD_GPIO_PIN(3, 28, 3, 0x228, 0x618),
- MX51_PIN_UART1_TXD = _MXC_BUILD_GPIO_PIN(3, 29, 3, 0x22C, 0x61C),
- MX51_PIN_UART1_RTS = _MXC_BUILD_GPIO_PIN(3, 30, 3, 0x230, 0x620),
- MX51_PIN_UART1_CTS = _MXC_BUILD_GPIO_PIN(3, 31, 3, 0x234, 0x624),
- MX51_PIN_UART2_RXD = _MXC_BUILD_GPIO_PIN(0, 20, 3, 0x238, 0x628),
- MX51_PIN_UART2_TXD = _MXC_BUILD_GPIO_PIN(0, 21, 3, 0x23C, 0x62C),
- MX51_PIN_UART3_RXD = _MXC_BUILD_GPIO_PIN(0, 22, 3, 0x240, 0x630),
- MX51_PIN_UART3_TXD = _MXC_BUILD_GPIO_PIN(0, 23, 3, 0x244, 0x634),
- MX51_PIN_OWIRE_LINE = _MXC_BUILD_GPIO_PIN(0, 24, 3, 0x248, 0x638),
- MX51_PIN_KEY_ROW0 = _MXC_BUILD_NON_GPIO_PIN(0x24C, 0x63C),
- MX51_PIN_KEY_ROW1 = _MXC_BUILD_NON_GPIO_PIN(0x250, 0x640),
- MX51_PIN_KEY_ROW2 = _MXC_BUILD_NON_GPIO_PIN(0x254, 0x644),
- MX51_PIN_KEY_ROW3 = _MXC_BUILD_NON_GPIO_PIN(0x258, 0x648),
- MX51_PIN_KEY_COL0 = _MXC_BUILD_NON_GPIO_PIN(0x25C, 0x64C),
- MX51_PIN_KEY_COL1 = _MXC_BUILD_NON_GPIO_PIN(0x260, 0x650),
- MX51_PIN_KEY_COL2 = _MXC_BUILD_NON_GPIO_PIN(0x264, 0x654),
- MX51_PIN_KEY_COL3 = _MXC_BUILD_NON_GPIO_PIN(0x268, 0x658),
- MX51_PIN_KEY_COL4 = _MXC_BUILD_NON_GPIO_PIN(0x26C, 0x65C),
- MX51_PIN_KEY_COL5 = _MXC_BUILD_NON_GPIO_PIN(0x270, 0x660),
- MX51_PIN_USBH1_CLK = _MXC_BUILD_GPIO_PIN(0, 25, 2, 0x278, 0x678),
- MX51_PIN_USBH1_DIR = _MXC_BUILD_GPIO_PIN(0, 26, 2, 0x27C, 0x67C),
- MX51_PIN_USBH1_STP = _MXC_BUILD_GPIO_PIN(0, 27, 2, 0x280, 0x680),
- MX51_PIN_USBH1_NXT = _MXC_BUILD_GPIO_PIN(0, 28, 2, 0x284, 0x684),
- MX51_PIN_USBH1_DATA0 = _MXC_BUILD_GPIO_PIN(0, 11, 2, 0x288, 0x688),
- MX51_PIN_USBH1_DATA1 = _MXC_BUILD_GPIO_PIN(0, 12, 2, 0x28C, 0x68C),
- MX51_PIN_USBH1_DATA2 = _MXC_BUILD_GPIO_PIN(0, 13, 2, 0x290, 0x690),
- MX51_PIN_USBH1_DATA3 = _MXC_BUILD_GPIO_PIN(0, 14, 2, 0x294, 0x694),
- MX51_PIN_USBH1_DATA4 = _MXC_BUILD_GPIO_PIN(0, 15, 2, 0x298, 0x698),
- MX51_PIN_USBH1_DATA5 = _MXC_BUILD_GPIO_PIN(0, 16, 2, 0x29C, 0x69C),
- MX51_PIN_USBH1_DATA6 = _MXC_BUILD_GPIO_PIN(0, 17, 2, 0x2A0, 0x6A0),
- MX51_PIN_USBH1_DATA7 = _MXC_BUILD_GPIO_PIN(0, 18, 2, 0x2A4, 0x6A4),
- MX51_PIN_DI1_PIN11 = _MXC_BUILD_GPIO_PIN(2, 0, 4, 0x2A8, 0x6A8),
- MX51_PIN_DI1_PIN12 = _MXC_BUILD_GPIO_PIN(2, 1, 4, 0x2AC, 0x6AC),
- MX51_PIN_DI1_PIN13 = _MXC_BUILD_GPIO_PIN(2, 2, 4, 0x2B0, 0x6B0),
- MX51_PIN_DI1_D0_CS = _MXC_BUILD_GPIO_PIN(2, 3, 4, 0x2B4, 0x6B4),
- MX51_PIN_DI1_D1_CS = _MXC_BUILD_GPIO_PIN(2, 4, 4, 0x2B8, 0x6B8),
- MX51_PIN_DISPB2_SER_DIN = _MXC_BUILD_GPIO_PIN(2, 5, 4, 0x2BC, 0x6BC),
- MX51_PIN_DISPB2_SER_DIO = _MXC_BUILD_GPIO_PIN(2, 6, 4, 0x2C0, 0x6C0),
- MX51_PIN_DISPB2_SER_CLK = _MXC_BUILD_GPIO_PIN(2, 7, 4, 0x2C4, 0x6C4),
- MX51_PIN_DISPB2_SER_RS = _MXC_BUILD_GPIO_PIN(2, 8, 4, 0x2C8, 0x6C8),
- MX51_PIN_DISP1_DAT0 = _MXC_BUILD_NON_GPIO_PIN(0x2CC, 0x6CC),
- MX51_PIN_DISP1_DAT1 = _MXC_BUILD_NON_GPIO_PIN(0x2D0, 0x6D0),
- MX51_PIN_DISP1_DAT2 = _MXC_BUILD_NON_GPIO_PIN(0x2D4, 0x6D4),
- MX51_PIN_DISP1_DAT3 = _MXC_BUILD_NON_GPIO_PIN(0x2D8, 0x6D8),
- MX51_PIN_DISP1_DAT4 = _MXC_BUILD_NON_GPIO_PIN(0x2DC, 0x6DC),
- MX51_PIN_DISP1_DAT5 = _MXC_BUILD_NON_GPIO_PIN(0x2E0, 0x6E0),
- MX51_PIN_DISP1_DAT6 = _MXC_BUILD_NON_GPIO_PIN(0x2E4, 0x6E4),
- MX51_PIN_DISP1_DAT7 = _MXC_BUILD_NON_GPIO_PIN(0x2E8, 0x6E8),
- MX51_PIN_DISP1_DAT8 = _MXC_BUILD_NON_GPIO_PIN(0x2EC, 0x6EC),
- MX51_PIN_DISP1_DAT9 = _MXC_BUILD_NON_GPIO_PIN(0x2F0, 0x6F0),
- MX51_PIN_DISP1_DAT10 = _MXC_BUILD_NON_GPIO_PIN(0x2F4, 0x6F4),
- MX51_PIN_DISP1_DAT11 = _MXC_BUILD_NON_GPIO_PIN(0x2F8, 0x6F8),
- MX51_PIN_DISP1_DAT12 = _MXC_BUILD_NON_GPIO_PIN(0x2FC, 0x6FC),
- MX51_PIN_DISP1_DAT13 = _MXC_BUILD_NON_GPIO_PIN(0x300, 0x700),
- MX51_PIN_DISP1_DAT14 = _MXC_BUILD_NON_GPIO_PIN(0x304, 0x704),
- MX51_PIN_DISP1_DAT15 = _MXC_BUILD_NON_GPIO_PIN(0x308, 0x708),
- MX51_PIN_DISP1_DAT16 = _MXC_BUILD_NON_GPIO_PIN(0x30C, 0x70C),
- MX51_PIN_DISP1_DAT17 = _MXC_BUILD_NON_GPIO_PIN(0x310, 0x710),
- MX51_PIN_DISP1_DAT18 = _MXC_BUILD_NON_GPIO_PIN(0x314, 0x714),
- MX51_PIN_DISP1_DAT19 = _MXC_BUILD_NON_GPIO_PIN(0x318, 0x718),
- MX51_PIN_DISP1_DAT20 = _MXC_BUILD_NON_GPIO_PIN(0x31C, 0x71C),
- MX51_PIN_DISP1_DAT21 = _MXC_BUILD_NON_GPIO_PIN(0x320, 0x720),
- MX51_PIN_DISP1_DAT22 = _MXC_BUILD_NON_GPIO_PIN(0x324, 0x724),
- MX51_PIN_DISP1_DAT23 = _MXC_BUILD_NON_GPIO_PIN(0x328, 0x728),
- MX51_PIN_DI1_PIN3 = _MXC_BUILD_NON_GPIO_PIN(0x32C, 0x72C),
- MX51_PIN_DI1_PIN2 = _MXC_BUILD_NON_GPIO_PIN(0x330, 0x734),
- MX51_PIN_DI_GP1 = _MXC_BUILD_NON_GPIO_PIN(0x334, 0x73C),
- MX51_PIN_DI_GP2 = _MXC_BUILD_NON_GPIO_PIN(0x338, 0x740),
- MX51_PIN_DI_GP3 = _MXC_BUILD_NON_GPIO_PIN(0x33C, 0x744),
- MX51_PIN_DI2_PIN4 = _MXC_BUILD_NON_GPIO_PIN(0x340, 0x748),
- MX51_PIN_DI2_PIN2 = _MXC_BUILD_NON_GPIO_PIN(0x344, 0x74C),
- MX51_PIN_DI2_PIN3 = _MXC_BUILD_NON_GPIO_PIN(0x348, 0x750),
- MX51_PIN_DI2_DISP_CLK = _MXC_BUILD_NON_GPIO_PIN(0x34C, 0x754),
- MX51_PIN_DI_GP4 = _MXC_BUILD_NON_GPIO_PIN(0x350, 0x758),
- MX51_PIN_DISP2_DAT0 = _MXC_BUILD_NON_GPIO_PIN(0x354, 0x75C),
- MX51_PIN_DISP2_DAT1 = _MXC_BUILD_NON_GPIO_PIN(0x358, 0x760),
- MX51_PIN_DISP2_DAT2 = _MXC_BUILD_NON_GPIO_PIN(0x35C, 0x764),
- MX51_PIN_DISP2_DAT3 = _MXC_BUILD_NON_GPIO_PIN(0x360, 0x768),
- MX51_PIN_DISP2_DAT4 = _MXC_BUILD_NON_GPIO_PIN(0x364, 0x76C),
- MX51_PIN_DISP2_DAT5 = _MXC_BUILD_NON_GPIO_PIN(0x368, 0x770),
- MX51_PIN_DISP2_DAT6 = _MXC_BUILD_GPIO_PIN(0, 19, 5, 0x36C, 0x774),
- MX51_PIN_DISP2_DAT7 = _MXC_BUILD_GPIO_PIN(0, 29, 5, 0x370, 0x778),
- MX51_PIN_DISP2_DAT8 = _MXC_BUILD_GPIO_PIN(0, 30, 5, 0x374, 0x77C),
- MX51_PIN_DISP2_DAT9 = _MXC_BUILD_GPIO_PIN(0, 31, 5, 0x378, 0x780),
- MX51_PIN_DISP2_DAT10 = _MXC_BUILD_NON_GPIO_PIN(0x37C, 0x784),
- MX51_PIN_DISP2_DAT11 = _MXC_BUILD_NON_GPIO_PIN(0x380, 0x788),
- MX51_PIN_DISP2_DAT12 = _MXC_BUILD_NON_GPIO_PIN(0x384, 0x78C),
- MX51_PIN_DISP2_DAT13 = _MXC_BUILD_NON_GPIO_PIN(0x388, 0x790),
- MX51_PIN_DISP2_DAT14 = _MXC_BUILD_NON_GPIO_PIN(0x38C, 0x794),
- MX51_PIN_DISP2_DAT15 = _MXC_BUILD_NON_GPIO_PIN(0x390, 0x798),
- MX51_PIN_SD1_CMD = _MXC_BUILD_NON_GPIO_PIN(0x394, 0x79C),
- MX51_PIN_SD1_CLK = _MXC_BUILD_NON_GPIO_PIN(0x398, 0x7A0),
- MX51_PIN_SD1_DATA0 = _MXC_BUILD_NON_GPIO_PIN(0x39C, 0x7A4),
- MX51_PIN_SD1_DATA1 = _MXC_BUILD_NON_GPIO_PIN(0x3A0, 0x7A8),
- MX51_PIN_SD1_DATA2 = _MXC_BUILD_NON_GPIO_PIN(0x3A4, 0x7AC),
- MX51_PIN_SD1_DATA3 = _MXC_BUILD_NON_GPIO_PIN(0x3A8, 0x7B0),
- MX51_PIN_GPIO1_0 = _MXC_BUILD_GPIO_PIN(0, 0, 1, 0x3AC, 0x7B4),
- MX51_PIN_GPIO1_1 = _MXC_BUILD_GPIO_PIN(0, 1, 1, 0x3B0, 0x7B8),
- MX51_PIN_SD2_CMD = _MXC_BUILD_NON_GPIO_PIN(0x3B4, 0x7BC),
- MX51_PIN_SD2_CLK = _MXC_BUILD_NON_GPIO_PIN(0x3B8, 0x7C0),
- MX51_PIN_SD2_DATA0 = _MXC_BUILD_NON_GPIO_PIN(0x3BC, 0x7C4),
- MX51_PIN_SD2_DATA1 = _MXC_BUILD_NON_GPIO_PIN(0x3C0, 0x7C8),
- MX51_PIN_SD2_DATA2 = _MXC_BUILD_NON_GPIO_PIN(0x3C4, 0x7CC),
- MX51_PIN_SD2_DATA3 = _MXC_BUILD_NON_GPIO_PIN(0x3C8, 0x7D0),
- MX51_PIN_GPIO1_2 = _MXC_BUILD_GPIO_PIN(0, 2, 0, 0x3CC, 0x7D4),
- MX51_PIN_GPIO1_3 = _MXC_BUILD_GPIO_PIN(0, 3, 0, 0x3D0, 0x7D8),
- MX51_PIN_PMIC_INT_REQ = _MXC_BUILD_NON_GPIO_PIN(0x3D4, 0x7FC),
- MX51_PIN_GPIO1_4 = _MXC_BUILD_GPIO_PIN(0, 4, 0, 0x3D8, 0x804),
- MX51_PIN_GPIO1_5 = _MXC_BUILD_GPIO_PIN(0, 5, 0, 0x3DC, 0x808),
- MX51_PIN_GPIO1_6 = _MXC_BUILD_GPIO_PIN(0, 6, 0, 0x3E0, 0x80C),
- MX51_PIN_GPIO1_7 = _MXC_BUILD_GPIO_PIN(0, 7, 0, 0x3E4, 0x810),
- MX51_PIN_GPIO1_8 = _MXC_BUILD_GPIO_PIN(0, 8, 0, 0x3E8, 0x814),
- MX51_PIN_GPIO1_9 = _MXC_BUILD_GPIO_PIN(0, 9, 0, 0x3EC, 0x818),
-
- /* The following are PADS used for drive strength */
-
- MX51_PIN_CTL_GRP_DDRPKS = _MXC_BUILD_NON_GPIO_PIN(0, 0x820),
- MX51_PIN_CTL_GRP_PKEDDR = _MXC_BUILD_NON_GPIO_PIN(0, 0x838),
- MX51_PIN_CTL_GRP_PKEADDR = _MXC_BUILD_NON_GPIO_PIN(0, 0x890),
- MX51_PIN_CTL_GRP_DDRAPKS = _MXC_BUILD_NON_GPIO_PIN(0, 0x87C),
- MX51_PIN_CTL_GRP_DDRAPUS = _MXC_BUILD_NON_GPIO_PIN(0, 0x84C),
- MX51_PIN_CTL_GRP_DDRPUS = _MXC_BUILD_NON_GPIO_PIN(0, 0x884),
- MX51_PIN_CTL_GRP_HYSDDR0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x85C),
- MX51_PIN_CTL_GRP_HYSDDR1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x864),
- MX51_PIN_CTL_GRP_HYSDDR2 = _MXC_BUILD_NON_GPIO_PIN(0, 0x86C),
- MX51_PIN_CTL_GRP_HYSDDR3 = _MXC_BUILD_NON_GPIO_PIN(0, 0x874),
- MX51_PIN_CTL_GRP_DDR_SR_B0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x878),
- MX51_PIN_CTL_GRP_DDR_SR_B1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x880),
- MX51_PIN_CTL_GRP_DDR_SR_B2 = _MXC_BUILD_NON_GPIO_PIN(0, 0x88C),
- MX51_PIN_CTL_GRP_DDR_SR_B4 = _MXC_BUILD_NON_GPIO_PIN(0, 0x89C),
- MX51_PIN_CTL_GRP_DRAM_B0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8A4),
- MX51_PIN_CTL_GRP_DRAM_B1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8AC),
- MX51_PIN_CTL_GRP_DRAM_B2 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8B8),
- MX51_PIN_CTL_GRP_DRAM_B4 = _MXC_BUILD_NON_GPIO_PIN(0, 0x82C),
- MX51_PIN_CTL_GRP_INMODE1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8A0),
- MX51_PIN_CTL_GRP_DDR_SR_A0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8B0),
- MX51_PIN_CTL_GRP_EMI_DS5 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8B4),
- MX51_PIN_CTL_GRP_DDR_SR_A1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8BC),
- MX51_PIN_CTL_GRP_DDR_A0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x83C),
- MX51_PIN_CTL_GRP_DDR_A1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x848),
- MX51_PIN_CTL_GRP_DISP_PKE0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x868),
- MX51_PIN_CTL_DRAM_RAS = _MXC_BUILD_NON_GPIO_PIN(0, 0x4A4),
- MX51_PIN_CTL_DRAM_CAS = _MXC_BUILD_NON_GPIO_PIN(0, 0x4A8),
- MX51_PIN_CTL_DRAM_SDWE = _MXC_BUILD_NON_GPIO_PIN(0, 0x4Ac),
- MX51_PIN_CTL_DRAM_SDCKE0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4B0),
- MX51_PIN_CTL_DRAM_SDCKE1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4B4),
- MX51_PIN_CTL_DRAM_SDCLK = _MXC_BUILD_NON_GPIO_PIN(0, 0x4B8),
- MX51_PIN_CTL_DRAM_SDQS0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4BC),
- MX51_PIN_CTL_DRAM_SDQS1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4C0),
- MX51_PIN_CTL_DRAM_SDQS2 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4C4),
- MX51_PIN_CTL_DRAM_SDQS3 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4C8),
- MX51_PIN_CTL_DRAM_CS0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4CC),
- MX51_PIN_CTL_DRAM_CS1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4D0),
- MX51_PIN_CTL_DRAM_DQM0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4D4),
- MX51_PIN_CTL_DRAM_DQM1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4D8),
- MX51_PIN_CTL_DRAM_DQM2 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4DC),
- MX51_PIN_CTL_DRAM_DQM3 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4E0),
-};
-
-enum {
- MX53_PIN_GPIO_19 = _MXC_BUILD_GPIO_PIN(3, 5, 1, 0x20, 0x348),
- MX53_PIN_KEY_COL0 = _MXC_BUILD_GPIO_PIN(3, 6, 1, 0x24, 0x34C),
- MX53_PIN_KEY_ROW0 = _MXC_BUILD_GPIO_PIN(3, 7, 1, 0x28, 0x350),
- MX53_PIN_KEY_COL1 = _MXC_BUILD_GPIO_PIN(3, 8, 1, 0x2C, 0x354),
- MX53_PIN_KEY_ROW1 = _MXC_BUILD_GPIO_PIN(3, 9, 1, 0x30, 0x358),
- MX53_PIN_KEY_COL2 = _MXC_BUILD_GPIO_PIN(3, 10, 1, 0x34, 0x35C),
- MX53_PIN_KEY_ROW2 = _MXC_BUILD_GPIO_PIN(3, 11, 1, 0x38, 0x360),
- MX53_PIN_KEY_COL3 = _MXC_BUILD_GPIO_PIN(3, 12, 1, 0x3C, 0x364),
- MX53_PIN_KEY_ROW3 = _MXC_BUILD_GPIO_PIN(3, 13, 1, 0x40, 0x368),
- MX53_PIN_KEY_COL4 = _MXC_BUILD_GPIO_PIN(3, 14, 1, 0x44, 0x36C),
- MX53_PIN_KEY_ROW4 = _MXC_BUILD_GPIO_PIN(3, 15, 1, 0x48, 0x370),
- MX53_PIN_NVCC_KEYPAD = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x374),
- MX53_PIN_DI0_DISP_CLK = _MXC_BUILD_GPIO_PIN(3, 16, 1, 0x4C, 0x378),
- MX53_PIN_DI0_PIN15 = _MXC_BUILD_GPIO_PIN(3, 17, 1, 0x50, 0x37C),
- MX53_PIN_DI0_PIN2 = _MXC_BUILD_GPIO_PIN(3, 18, 1, 0x54, 0x380),
- MX53_PIN_DI0_PIN3 = _MXC_BUILD_GPIO_PIN(3, 19, 1, 0x58, 0x384),
- MX53_PIN_DI0_PIN4 = _MXC_BUILD_GPIO_PIN(3, 20, 1, 0x5C, 0x388),
- MX53_PIN_DISP0_DAT0 = _MXC_BUILD_GPIO_PIN(3, 21, 1, 0x60, 0x38C),
- MX53_PIN_DISP0_DAT1 = _MXC_BUILD_GPIO_PIN(3, 22, 1, 0x64, 0x390),
- MX53_PIN_DISP0_DAT2 = _MXC_BUILD_GPIO_PIN(3, 23, 1, 0x68, 0x394),
- MX53_PIN_DISP0_DAT3 = _MXC_BUILD_GPIO_PIN(3, 24, 1, 0x6C, 0x398),
- MX53_PIN_DISP0_DAT4 = _MXC_BUILD_GPIO_PIN(3, 25, 1, 0x70, 0x39C),
- MX53_PIN_DISP0_DAT5 = _MXC_BUILD_GPIO_PIN(3, 26, 1, 0x74, 0x3A0),
- MX53_PIN_DISP0_DAT6 = _MXC_BUILD_GPIO_PIN(3, 27, 1, 0x78, 0x3A4),
- MX53_PIN_DISP0_DAT7 = _MXC_BUILD_GPIO_PIN(3, 28, 1, 0x7C, 0x3A8),
- MX53_PIN_DISP0_DAT8 = _MXC_BUILD_GPIO_PIN(3, 29, 1, 0x80, 0x3AC),
- MX53_PIN_DISP0_DAT9 = _MXC_BUILD_GPIO_PIN(3, 30, 1, 0x84, 0x3B0),
- MX53_PIN_DISP0_DAT10 = _MXC_BUILD_GPIO_PIN(3, 31, 1, 0x88, 0x3B4),
- MX53_PIN_DISP0_DAT11 = _MXC_BUILD_GPIO_PIN(4, 5, 1, 0x8C, 0x3B8),
- MX53_PIN_DISP0_DAT12 = _MXC_BUILD_GPIO_PIN(4, 6, 1, 0x90, 0x3BC),
- MX53_PIN_DISP0_DAT13 = _MXC_BUILD_GPIO_PIN(4, 7, 1, 0x94, 0x3C0),
- MX53_PIN_DISP0_DAT14 = _MXC_BUILD_GPIO_PIN(4, 8, 1, 0x98, 0x3C4),
- MX53_PIN_DISP0_DAT15 = _MXC_BUILD_GPIO_PIN(4, 9, 1, 0x9C, 0x3C8),
- MX53_PIN_DISP0_DAT16 = _MXC_BUILD_GPIO_PIN(4, 10, 1, 0xA0, 0x3CC),
- MX53_PIN_DISP0_DAT17 = _MXC_BUILD_GPIO_PIN(4, 11, 1, 0xA4, 0x3D0),
- MX53_PIN_DISP0_DAT18 = _MXC_BUILD_GPIO_PIN(4, 12, 1, 0xA8, 0x3D4),
- MX53_PIN_DISP0_DAT19 = _MXC_BUILD_GPIO_PIN(4, 13, 1, 0xAC, 0x3D8),
- MX53_PIN_DISP0_DAT20 = _MXC_BUILD_GPIO_PIN(4, 14, 1, 0xB0, 0x3DC),
- MX53_PIN_DISP0_DAT21 = _MXC_BUILD_GPIO_PIN(4, 15, 1, 0xB4, 0x3E0),
- MX53_PIN_DISP0_DAT22 = _MXC_BUILD_GPIO_PIN(4, 16, 1, 0xB8, 0x3E4),
- MX53_PIN_DISP0_DAT23 = _MXC_BUILD_GPIO_PIN(4, 17, 1, 0xBC, 0x3E8),
- MX53_PIN_CSI0_PIXCLK = _MXC_BUILD_GPIO_PIN(4, 18, 1, 0xC0, 0x3EC),
- MX53_PIN_CSI0_MCLK = _MXC_BUILD_GPIO_PIN(4, 19, 1, 0xC4, 0x3F0),
- MX53_PIN_CSI0_DATA_EN = _MXC_BUILD_GPIO_PIN(4, 20, 1, 0xC8, 0x3F4),
- MX53_PIN_CSI0_VSYNC = _MXC_BUILD_GPIO_PIN(4, 21, 1, 0xCC, 0x3F8),
- MX53_PIN_CSI0_D4 = _MXC_BUILD_GPIO_PIN(4, 22, 1, 0xD0, 0x3FC),
- MX53_PIN_CSI0_D5 = _MXC_BUILD_GPIO_PIN(4, 23, 1, 0xD4, 0x400),
- MX53_PIN_CSI0_D6 = _MXC_BUILD_GPIO_PIN(4, 24, 1, 0xD8, 0x404),
- MX53_PIN_CSI0_D7 = _MXC_BUILD_GPIO_PIN(4, 25, 1, 0xDC, 0x408),
- MX53_PIN_CSI0_D8 = _MXC_BUILD_GPIO_PIN(4, 26, 1, 0xE0, 0x40C),
- MX53_PIN_CSI0_D9 = _MXC_BUILD_GPIO_PIN(4, 27, 1, 0xE4, 0x410),
- MX53_PIN_CSI0_D10 = _MXC_BUILD_GPIO_PIN(4, 28, 1, 0xE8, 0x414),
- MX53_PIN_CSI0_D11 = _MXC_BUILD_GPIO_PIN(4, 29, 1, 0xEC, 0x418),
- MX53_PIN_CSI0_D12 = _MXC_BUILD_GPIO_PIN(4, 30, 1, 0xF0, 0x41C),
- MX53_PIN_CSI0_D13 = _MXC_BUILD_GPIO_PIN(4, 31, 1, 0xF4, 0x420),
- MX53_PIN_CSI0_D14 = _MXC_BUILD_GPIO_PIN(5, 0, 1, 0xF8, 0x424),
- MX53_PIN_CSI0_D15 = _MXC_BUILD_GPIO_PIN(5, 1, 1, 0xFC, 0x428),
- MX53_PIN_CSI0_D16 = _MXC_BUILD_GPIO_PIN(5, 2, 1, 0x100, 0x42C),
- MX53_PIN_CSI0_D17 = _MXC_BUILD_GPIO_PIN(5, 3, 1, 0x104, 0x430),
- MX53_PIN_CSI0_D18 = _MXC_BUILD_GPIO_PIN(5, 4, 1, 0x108, 0x434),
- MX53_PIN_CSI0_D19 = _MXC_BUILD_GPIO_PIN(5, 5, 1, 0x10C, 0x438),
- MX53_PIN_NVCC_CSI0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x43C),
- MX53_PIN_JTAG_TMS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x440),
- MX53_PIN_JTAG_MOD = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x444),
- MX53_PIN_JTAG_TRSTB = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x448),
- MX53_PIN_JTAG_TDI = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x44C),
- MX53_PIN_JTAG_TCK = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x450),
- MX53_PIN_JTAG_TDO = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x454),
- MX53_PIN_EIM_A25 = _MXC_BUILD_GPIO_PIN(4, 2, 1, 0x110, 0x458),
- MX53_PIN_EIM_EB2 = _MXC_BUILD_GPIO_PIN(1, 30, 1, 0x114, 0x45C),
- MX53_PIN_EIM_D16 = _MXC_BUILD_GPIO_PIN(2, 16, 1, 0x118, 0x460),
- MX53_PIN_EIM_D17 = _MXC_BUILD_GPIO_PIN(2, 17, 1, 0x11C, 0x464),
- MX53_PIN_EIM_D18 = _MXC_BUILD_GPIO_PIN(2, 18, 1, 0x120, 0x468),
- MX53_PIN_EIM_D19 = _MXC_BUILD_GPIO_PIN(2, 19, 1, 0x124, 0x46C),
- MX53_PIN_EIM_D20 = _MXC_BUILD_GPIO_PIN(2, 20, 1, 0x128, 0x470),
- MX53_PIN_EIM_D21 = _MXC_BUILD_GPIO_PIN(2, 21, 1, 0x12C, 0x474),
- MX53_PIN_EIM_D22 = _MXC_BUILD_GPIO_PIN(2, 22, 1, 0x130, 0x478),
- MX53_PIN_EIM_D23 = _MXC_BUILD_GPIO_PIN(2, 23, 1, 0x134, 0x47C),
- MX53_PIN_EIM_EB3 = _MXC_BUILD_GPIO_PIN(1, 31, 1, 0x138, 0x480),
- MX53_PIN_EIM_D24 = _MXC_BUILD_GPIO_PIN(2, 24, 1, 0x13C, 0x484),
- MX53_PIN_EIM_D25 = _MXC_BUILD_GPIO_PIN(2, 25, 1, 0x140, 0x488),
- MX53_PIN_EIM_D26 = _MXC_BUILD_GPIO_PIN(2, 26, 1, 0x144, 0x48C),
- MX53_PIN_EIM_D27 = _MXC_BUILD_GPIO_PIN(2, 27, 1, 0x148, 0x490),
- MX53_PIN_EIM_D28 = _MXC_BUILD_GPIO_PIN(2, 28, 1, 0x14C, 0x494),
- MX53_PIN_EIM_D29 = _MXC_BUILD_GPIO_PIN(2, 29, 1, 0x150, 0x498),
- MX53_PIN_EIM_D30 = _MXC_BUILD_GPIO_PIN(2, 30, 1, 0x154, 0x49C),
- MX53_PIN_EIM_D31 = _MXC_BUILD_GPIO_PIN(2, 31, 1, 0x158, 0x4A0),
- MX53_PIN_NVCC_EIM1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4A4),
- MX53_PIN_EIM_A24 = _MXC_BUILD_GPIO_PIN(4, 4, 1, 0x15C, 0x4A8),
- MX53_PIN_EIM_A23 = _MXC_BUILD_GPIO_PIN(5, 6, 1, 0x160, 0x4AC),
- MX53_PIN_EIM_A22 = _MXC_BUILD_GPIO_PIN(1, 16, 1, 0x164, 0x4B0),
- MX53_PIN_EIM_A21 = _MXC_BUILD_GPIO_PIN(1, 17, 1, 0x168, 0x4B4),
- MX53_PIN_EIM_A20 = _MXC_BUILD_GPIO_PIN(1, 18, 1, 0x16C, 0x4B8),
- MX53_PIN_EIM_A19 = _MXC_BUILD_GPIO_PIN(1, 19, 1, 0x170, 0x4BC),
- MX53_PIN_EIM_A18 = _MXC_BUILD_GPIO_PIN(1, 20, 1, 0x174, 0x4C0),
- MX53_PIN_EIM_A17 = _MXC_BUILD_GPIO_PIN(1, 21, 1, 0x178, 0x4C4),
- MX53_PIN_EIM_A16 = _MXC_BUILD_GPIO_PIN(1, 22, 1, 0x17C, 0x4C8),
- MX53_PIN_EIM_CS0 = _MXC_BUILD_GPIO_PIN(1, 23, 1, 0x180, 0x4CC),
- MX53_PIN_EIM_CS1 = _MXC_BUILD_GPIO_PIN(1, 24, 1, 0x184, 0x4D0),
- MX53_PIN_EIM_OE = _MXC_BUILD_GPIO_PIN(1, 25, 1, 0x188, 0x4D4),
- MX53_PIN_EIM_RW = _MXC_BUILD_GPIO_PIN(1, 26, 1, 0x18C, 0x4D8),
- MX53_PIN_EIM_LBA = _MXC_BUILD_GPIO_PIN(1, 27, 1, 0x190, 0x4DC),
- MX53_PIN_NVCC_EIM4 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4E0),
- MX53_PIN_EIM_EB0 = _MXC_BUILD_GPIO_PIN(1, 28, 1, 0x194, 0x4E4),
- MX53_PIN_EIM_EB1 = _MXC_BUILD_GPIO_PIN(1, 29, 1, 0x198, 0x4E8),
- MX53_PIN_EIM_DA0 = _MXC_BUILD_GPIO_PIN(2, 0, 1, 0x19C, 0x4EC),
- MX53_PIN_EIM_DA1 = _MXC_BUILD_GPIO_PIN(2, 1, 1, 0x1A0, 0x4F0),
- MX53_PIN_EIM_DA2 = _MXC_BUILD_GPIO_PIN(2, 2, 1, 0x1A4, 0x4F4),
- MX53_PIN_EIM_DA3 = _MXC_BUILD_GPIO_PIN(2, 3, 1, 0x1A8, 0x4F8),
- MX53_PIN_EIM_DA4 = _MXC_BUILD_GPIO_PIN(2, 4, 1, 0x1AC, 0x4FC),
- MX53_PIN_EIM_DA5 = _MXC_BUILD_GPIO_PIN(2, 5, 1, 0x1B0, 0x500),
- MX53_PIN_EIM_DA6 = _MXC_BUILD_GPIO_PIN(2, 6, 1, 0x1B4, 0x504),
- MX53_PIN_EIM_DA7 = _MXC_BUILD_GPIO_PIN(2, 7, 1, 0x1B8, 0x508),
- MX53_PIN_EIM_DA8 = _MXC_BUILD_GPIO_PIN(2, 8, 1, 0x1BC, 0x50C),
- MX53_PIN_EIM_DA9 = _MXC_BUILD_GPIO_PIN(2, 9, 1, 0x1C0, 0x510),
- MX53_PIN_EIM_DA10 = _MXC_BUILD_GPIO_PIN(2, 10, 1, 0x1C4, 0x514),
- MX53_PIN_EIM_DA11 = _MXC_BUILD_GPIO_PIN(2, 11, 1, 0x1C8, 0x518),
- MX53_PIN_EIM_DA12 = _MXC_BUILD_GPIO_PIN(2, 12, 1, 0x1CC, 0x51C),
- MX53_PIN_EIM_DA13 = _MXC_BUILD_GPIO_PIN(2, 13, 1, 0x1D0, 0x520),
- MX53_PIN_EIM_DA14 = _MXC_BUILD_GPIO_PIN(2, 14, 1, 0x1D4, 0x524),
- MX53_PIN_EIM_DA15 = _MXC_BUILD_GPIO_PIN(2, 15, 1, 0x1D8, 0x528),
- MX53_PIN_NANDF_WE_B = _MXC_BUILD_GPIO_PIN(5, 12, 1, 0x1DC, 0x52C),
- MX53_PIN_NANDF_RE_B = _MXC_BUILD_GPIO_PIN(5, 13, 1, 0x1E0, 0x530),
- MX53_PIN_EIM_WAIT = _MXC_BUILD_GPIO_PIN(4, 0, 1, 0x1E4, 0x534),
- MX53_PIN_EIM_BCLK = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x538),
- MX53_PIN_NVCC_EIM7 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x53C),
- MX53_PIN_LVDS1_TX3_P = _MXC_BUILD_GPIO_PIN(5, 22, 0, 0x1EC, NON_PAD_I),
- MX53_PIN_LVDS1_TX2_P = _MXC_BUILD_GPIO_PIN(5, 24, 0, 0x1F0, NON_PAD_I),
- MX53_PIN_LVDS1_CLK_P = _MXC_BUILD_GPIO_PIN(5, 26, 0, 0x1F4, NON_PAD_I),
- MX53_PIN_LVDS1_TX1_P = _MXC_BUILD_GPIO_PIN(5, 28, 0, 0x1F8, NON_PAD_I),
- MX53_PIN_LVDS1_TX0_P = _MXC_BUILD_GPIO_PIN(5, 30, 0, 0x1FC, NON_PAD_I),
- MX53_PIN_LVDS0_TX3_P = _MXC_BUILD_GPIO_PIN(6, 22, 0, 0x200, NON_PAD_I),
- MX53_PIN_LVDS0_CLK_P = _MXC_BUILD_GPIO_PIN(6, 24, 0, 0x204, NON_PAD_I),
- MX53_PIN_LVDS0_TX2_P = _MXC_BUILD_GPIO_PIN(6, 26, 0, 0x208, NON_PAD_I),
- MX53_PIN_LVDS0_TX1_P = _MXC_BUILD_GPIO_PIN(6, 28, 0, 0x20C, NON_PAD_I),
- MX53_PIN_LVDS0_TX0_P = _MXC_BUILD_GPIO_PIN(6, 30, 0, 0x210, NON_PAD_I),
- MX53_PIN_GPIO_10 = _MXC_BUILD_GPIO_PIN(3, 0, 0, 0x214, 0x540),
- MX53_PIN_GPIO_11 = _MXC_BUILD_GPIO_PIN(3, 1, 0, 0x218, 0x544),
- MX53_PIN_GPIO_12 = _MXC_BUILD_GPIO_PIN(3, 2, 0, 0x21C, 0x548),
- MX53_PIN_GPIO_13 = _MXC_BUILD_GPIO_PIN(3, 3, 0, 0x220, 0x54C),
- MX53_PIN_GPIO_14 = _MXC_BUILD_GPIO_PIN(3, 4, 0, 0x224, 0x550),
- MX53_PIN_DRAM_DQM3 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x554),
- MX53_PIN_DRAM_SDQS3 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x558),
- MX53_PIN_DRAM_SDCKE1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x55C),
- MX53_PIN_DRAM_DQM2 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x560),
- MX53_PIN_DRAM_SDODT1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x564),
- MX53_PIN_DRAM_SDQS2 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x568),
- MX53_PIN_DRAM_RESET = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x56C),
- MX53_PIN_DRAM_SDCLK1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x570),
- MX53_PIN_DRAM_CAS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x574),
- MX53_PIN_DRAM_SDCLK0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x578),
- MX53_PIN_DRAM_SDQS0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x57C),
- MX53_PIN_DRAM_SDODT0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x580),
- MX53_PIN_DRAM_DQM0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x584),
- MX53_PIN_DRAM_RAS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x588),
- MX53_PIN_DRAM_SDCKE0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x58C),
- MX53_PIN_DRAM_SDQS1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x590),
- MX53_PIN_DRAM_DQM1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x594),
- MX53_PIN_PMIC_ON_REQ = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x598),
- MX53_PIN_PMIC_STBY_REQ = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x59C),
- MX53_PIN_NANDF_CLE = _MXC_BUILD_GPIO_PIN(5, 7, 1, 0x228, 0x5A0),
- MX53_PIN_NANDF_ALE = _MXC_BUILD_GPIO_PIN(5, 8 , 1, 0x22C, 0x5A4),
- MX53_PIN_NANDF_WP_B = _MXC_BUILD_GPIO_PIN(5, 9, 1, 0x230, 0x5A8),
- MX53_PIN_NANDF_RB0 = _MXC_BUILD_GPIO_PIN(5, 10, 1, 0x234, 0x5AC),
- MX53_PIN_NANDF_CS0 = _MXC_BUILD_GPIO_PIN(5, 11, 1, 0x238, 0x5B0),
- MX53_PIN_NANDF_CS1 = _MXC_BUILD_GPIO_PIN(5, 14, 1, 0x23C, 0x5B4),
- MX53_PIN_NANDF_CS2 = _MXC_BUILD_GPIO_PIN(5, 15, 1, 0x240, 0x5B8),
- MX53_PIN_NANDF_CS3 = _MXC_BUILD_GPIO_PIN(5, 16, 1, 0x244, 0x5BC),
- MX53_PIN_NVCC_NANDF = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x5C0),
- MX53_PIN_FEC_MDIO = _MXC_BUILD_GPIO_PIN(0, 22, 1, 0x248, 0x5C4),
- MX53_PIN_FEC_REF_CLK = _MXC_BUILD_GPIO_PIN(0, 23, 1, 0x24C, 0x5C8),
- MX53_PIN_FEC_RX_ER = _MXC_BUILD_GPIO_PIN(0, 24, 1, 0x250, 0x5CC),
- MX53_PIN_FEC_CRS_DV = _MXC_BUILD_GPIO_PIN(0, 25, 1, 0x254, 0x5D0),
- MX53_PIN_FEC_RXD1 = _MXC_BUILD_GPIO_PIN(0, 26, 1, 0x258, 0x5D4),
- MX53_PIN_FEC_RXD0 = _MXC_BUILD_GPIO_PIN(0, 27, 1, 0x25C, 0x5D8),
- MX53_PIN_FEC_TX_EN = _MXC_BUILD_GPIO_PIN(0, 28, 1, 0x260, 0x5DC),
- MX53_PIN_FEC_TXD1 = _MXC_BUILD_GPIO_PIN(0, 29, 1, 0x264, 0x5E0),
- MX53_PIN_FEC_TXD0 = _MXC_BUILD_GPIO_PIN(0, 30, 1, 0x268, 0x5E4),
- MX53_PIN_FEC_MDC = _MXC_BUILD_GPIO_PIN(0, 31, 1, 0x26C, 0x5E8),
- MX53_PIN_NVCC_FEC = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x5EC),
- MX53_PIN_ATA_DIOW = _MXC_BUILD_GPIO_PIN(5, 17, 1, 0x270, 0x5F0),
- MX53_PIN_ATA_DMACK = _MXC_BUILD_GPIO_PIN(5, 18, 1, 0x274, 0x5F4),
- MX53_PIN_ATA_DMARQ = _MXC_BUILD_GPIO_PIN(6, 0, 1, 0x278, 0x5F8),
- MX53_PIN_ATA_BUFFER_EN = _MXC_BUILD_GPIO_PIN(6, 1, 1, 0x27C, 0x5FC),
- MX53_PIN_ATA_INTRQ = _MXC_BUILD_GPIO_PIN(6, 2, 1, 0x280, 0x600),
- MX53_PIN_ATA_DIOR = _MXC_BUILD_GPIO_PIN(6, 3, 1, 0x284, 0x604),
- MX53_PIN_ATA_RESET_B = _MXC_BUILD_GPIO_PIN(6, 4, 1, 0x288, 0x608),
- MX53_PIN_ATA_IORDY = _MXC_BUILD_GPIO_PIN(6, 5, 1, 0x28C, 0x60C),
- MX53_PIN_ATA_DA_0 = _MXC_BUILD_GPIO_PIN(6, 6, 1, 0x290, 0x610),
- MX53_PIN_ATA_DA_1 = _MXC_BUILD_GPIO_PIN(6, 7, 1, 0x294, 0x614),
- MX53_PIN_ATA_DA_2 = _MXC_BUILD_GPIO_PIN(6, 8, 1, 0x298, 0x618),
- MX53_PIN_ATA_CS_0 = _MXC_BUILD_GPIO_PIN(6, 9, 1, 0x29C, 0x61C),
- MX53_PIN_ATA_CS_1 = _MXC_BUILD_GPIO_PIN(6, 10, 1, 0x2A0, 0x620),
- MX53_PIN_NVCC_ATA2 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x624),
- MX53_PIN_ATA_DATA0 = _MXC_BUILD_GPIO_PIN(1, 0, 1, 0x2A4, 0x628),
- MX53_PIN_ATA_DATA1 = _MXC_BUILD_GPIO_PIN(1, 1, 1, 0x2A8, 0x62C),
- MX53_PIN_ATA_DATA2 = _MXC_BUILD_GPIO_PIN(1, 2, 1, 0x2AC, 0x630),
- MX53_PIN_ATA_DATA3 = _MXC_BUILD_GPIO_PIN(1, 3, 1, 0x2B0, 0x634),
- MX53_PIN_ATA_DATA4 = _MXC_BUILD_GPIO_PIN(1, 4, 1, 0x2B4, 0x638),
- MX53_PIN_ATA_DATA5 = _MXC_BUILD_GPIO_PIN(1, 5, 1, 0x2B8, 0x63C),
- MX53_PIN_ATA_DATA6 = _MXC_BUILD_GPIO_PIN(1, 6, 1, 0x2BC, 0x640),
- MX53_PIN_ATA_DATA7 = _MXC_BUILD_GPIO_PIN(1, 7, 1, 0x2C0, 0x644),
- MX53_PIN_ATA_DATA8 = _MXC_BUILD_GPIO_PIN(1, 8, 1, 0x2C4, 0x648),
- MX53_PIN_ATA_DATA9 = _MXC_BUILD_GPIO_PIN(1, 9, 1, 0x2C8, 0x64C),
- MX53_PIN_ATA_DATA10 = _MXC_BUILD_GPIO_PIN(1, 10, 1, 0x2CC, 0x650),
- MX53_PIN_ATA_DATA11 = _MXC_BUILD_GPIO_PIN(1, 11, 1, 0x2D0, 0x654),
- MX53_PIN_ATA_DATA12 = _MXC_BUILD_GPIO_PIN(1, 12, 1, 0x2D4, 0x658),
- MX53_PIN_ATA_DATA13 = _MXC_BUILD_GPIO_PIN(1, 13, 1, 0x2D8, 0x65C),
- MX53_PIN_ATA_DATA14 = _MXC_BUILD_GPIO_PIN(1, 14, 1, 0x2DC, 0x660),
- MX53_PIN_ATA_DATA15 = _MXC_BUILD_GPIO_PIN(1, 15, 1, 0x2E0, 0x664),
- MX53_PIN_NVCC_ATA0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x668),
- MX53_PIN_SD1_DATA0 = _MXC_BUILD_GPIO_PIN(0, 16, 1, 0x2E4, 0x66C),
- MX53_PIN_SD1_DATA1 = _MXC_BUILD_GPIO_PIN(0, 17, 1, 0x2E8, 0x670),
- MX53_PIN_SD1_CMD = _MXC_BUILD_GPIO_PIN(0, 18, 1, 0x2EC, 0x674),
- MX53_PIN_SD1_DATA2 = _MXC_BUILD_GPIO_PIN(0, 19, 1, 0x2F0, 0x678),
- MX53_PIN_SD1_CLK = _MXC_BUILD_GPIO_PIN(0, 20, 1, 0x2F4, 0x67C),
- MX53_PIN_SD1_DATA3 = _MXC_BUILD_GPIO_PIN(0, 21, 1, 0x2F8, 0x680),
- MX53_PIN_NVCC_SD1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x684),
- MX53_PIN_SD2_CLK = _MXC_BUILD_GPIO_PIN(0, 10, 1, 0x2FC, 0x688),
- MX53_PIN_SD2_CMD = _MXC_BUILD_GPIO_PIN(0, 11, 1, 0x300, 0x68C),
- MX53_PIN_SD2_DATA3 = _MXC_BUILD_GPIO_PIN(0, 12, 1, 0x304, 0x690),
- MX53_PIN_SD2_DATA2 = _MXC_BUILD_GPIO_PIN(0, 13, 1, 0x308, 0x694),
- MX53_PIN_SD2_DATA1 = _MXC_BUILD_GPIO_PIN(0, 14, 1, 0x30C, 0x698),
- MX53_PIN_SD2_DATA0 = _MXC_BUILD_GPIO_PIN(0, 15, 1, 0x310, 0x69C),
- MX53_PIN_NVCC_SD2 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6A0),
- MX53_PIN_GPIO_0 = _MXC_BUILD_GPIO_PIN(0, 0, 1, 0x314, 0x6A4),
- MX53_PIN_GPIO_1 = _MXC_BUILD_GPIO_PIN(0, 1, 1, 0x318, 0x6A8),
- MX53_PIN_GPIO_9 = _MXC_BUILD_GPIO_PIN(0, 9, 1, 0x31C, 0x6AC),
- MX53_PIN_GPIO_3 = _MXC_BUILD_GPIO_PIN(0, 3, 1, 0x320, 0x6B0),
- MX53_PIN_GPIO_6 = _MXC_BUILD_GPIO_PIN(0, 6, 1, 0x324, 0x6B4),
- MX53_PIN_GPIO_2 = _MXC_BUILD_GPIO_PIN(0, 2, 1, 0x328, 0x6B8),
- MX53_PIN_GPIO_4 = _MXC_BUILD_GPIO_PIN(0, 4, 1, 0x32C, 0x6BC),
- MX53_PIN_GPIO_5 = _MXC_BUILD_GPIO_PIN(0, 5, 1, 0x330, 0x6C0),
- MX53_PIN_GPIO_7 = _MXC_BUILD_GPIO_PIN(0, 7, 1, 0x334, 0x6C4),
- MX53_PIN_GPIO_8 = _MXC_BUILD_GPIO_PIN(0, 8, 1, 0x338, 0x6C8),
- MX53_PIN_GPIO_16 = _MXC_BUILD_GPIO_PIN(6, 11, 1, 0x33C, 0x6CC),
- MX53_PIN_GPIO_17 = _MXC_BUILD_GPIO_PIN(6, 12, 1, 0x340, 0x6D0),
- MX53_PIN_GPIO_18 = _MXC_BUILD_GPIO_PIN(6, 13, 1, 0x344, 0x6D4),
- MX53_PIN_NVCC_GPIO = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6D8),
- MX53_PIN_POR_B = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6DC),
- MX53_PIN_BOOT_MODE1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6E0),
- MX53_PIN_RESET_IN_B = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6E4),
- MX53_PIN_BOOT_MODE0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6E8),
- MX53_PIN_TEST_MODE = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6EC),
- MX53_PIN_GRP_ADDDS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6F0),
- MX53_PIN_GRP_DDRMODE_CTL = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6F4),
- MX53_PIN_GRP_DDRPKE = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6FC),
- MX53_PIN_GRP_DDRPK = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x708),
- MX53_PIN_GRP_TERM_CTL3 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x70C),
- MX53_PIN_GRP_DDRHYS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x710),
- MX53_PIN_GRP_DDRMODE = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x714),
- MX53_PIN_GRP_B0DS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x718),
- MX53_PIN_GRP_B1DS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x71C),
- MX53_PIN_GRP_CTLDS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x720),
- MX53_PIN_GRP_DDR_TYPE = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x724),
- MX53_PIN_GRP_B2DS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x728),
- MX53_PIN_GRP_B3DS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x72C),
-};
-/* various IOMUX input select register index */
-typedef enum iomux_input_select {
- MX51_AUDMUX_P4_INPUT_DA_AMX_SELECT_I = 0,
- MX51_AUDMUX_P4_INPUT_DB_AMX_SELECT_I,
- MX51_AUDMUX_P4_INPUT_TXCLK_AMX_SELECT_INPUT,
- MX51_AUDMUX_P4_INPUT_TXFS_AMX_SELECT_INPUT,
- MX51_AUDMUX_P5_INPUT_DA_AMX_SELECT_INPUT,
- MX51_AUDMUX_P5_INPUT_DB_AMX_SELECT_INPUT,
- MX51_AUDMUX_P5_INPUT_RXCLK_AMX_SELECT_INPUT,
- MX51_AUDMUX_P5_INPUT_RXFS_AMX_SELECT,
- MX51_AUDMUX_P5_INPUT_TXCLK_AMX_SELECT_INPUT,
- MX51_AUDMUX_P5_INPUT_TXFS_AMX_SELECT_INPUT,
- MX51_AUDMUX_P6_INPUT_DA_AMX_SELECT_INPUT,
- MX51_AUDMUX_P6_INPUT_DB_AMX_SELECT_INPUT,
- MX51_AUDMUX_P6_INPUT_RXCLK_AMX_SELECT_INPUT,
- MX51_AUDMUX_P6_INPUT_RXFS_AMX_SELECT_INPUT,
- MX51_AUDMUX_P6_INPUT_TXCLK_AMX_SELECT_INPUT,
- MX51_AUDMUX_P6_INPUT_TXFS_AMX_SELECT_INPUT,
- MX51_CCM_IPP_DI_CLK_SELECT_INPUT,
- /* TO2 */
- MX51_CCM_IPP_DI1_CLK_SELECT_INPUT,
- MX51_CCM_PLL1_BYPASS_CLK_SELECT_INPUT,
- MX51_CCM_PLL2_BYPASS_CLK_SELECT_INPUT,
- MX51_CSPI_IPP_CSPI_CLK_IN_SELECT_INPUT,
- MX51_CSPI_IPP_IND_MISO_SELECT_INPUT,
- MX51_CSPI_IPP_IND_MOSI_SELECT_INPUT,
- MX51_CSPI_IPP_IND_SS_B_1_SELECT_INPUT,
- MX51_CSPI_IPP_IND_SS_B_2_SELECT_INPUT,
- MX51_CSPI_IPP_IND_SS_B_3_SELECT_INPUT,
- MX51_DPLLIP1_L1T_TOG_EN_SELECT_INPUT,
- /* TO2 */
- MX51_ECSPI2_IPP_IND_SS_B_1_SELECT_INPUT,
- MX51_ECSPI2_IPP_IND_SS_B_3_SELECT_INPUT,
- MX51_EMI_IPP_IND_RDY_INT_SELECT_INPUT,
- MX51_ESDHC3_IPP_DAT0_IN_SELECT_INPUT,
- MX51_ESDHC3_IPP_DAT1_IN_SELECT_INPUT,
- MX51_ESDHC3_IPP_DAT2_IN_SELECT_INPUT,
- MX51_ESDHC3_IPP_DAT3_IN_SELECT_INPUT,
- MX51_FEC_FEC_COL_SELECT_INPUT,
- MX51_FEC_FEC_CRS_SELECT_INPUT,
- MX51_FEC_FEC_MDI_SELECT_INPUT,
- MX51_FEC_FEC_RDATA_0_SELECT_INPUT,
- MX51_FEC_FEC_RDATA_1_SELECT_INPUT,
- MX51_FEC_FEC_RDATA_2_SELECT_INPUT,
- MX51_FEC_FEC_RDATA_3_SELECT_INPUT,
- MX51_FEC_FEC_RX_CLK_SELECT_INPUT,
- MX51_FEC_FEC_RX_DV_SELECT_INPUT,
- MX51_FEC_FEC_RX_ER_SELECT_INPUT,
- MX51_FEC_FEC_TX_CLK_SELECT_INPUT,
- MX51_GPIO3_IPP_IND_G_IN_1_SELECT_INPUT,
- MX51_GPIO3_IPP_IND_G_IN_2_SELECT_INPUT,
- MX51_GPIO3_IPP_IND_G_IN_3_SELECT_INPUT,
- MX51_GPIO3_IPP_IND_G_IN_4_SELECT_INPUT,
- MX51_GPIO3_IPP_IND_G_IN_5_SELECT_INPUT,
- MX51_GPIO3_IPP_IND_G_IN_6_SELECT_INPUT,
- MX51_GPIO3_IPP_IND_G_IN_7_SELECT_INPUT,
- MX51_GPIO3_IPP_IND_G_IN_8_SELECT_INPUT,
- /* TO2 */
- MX51_GPIO3_IPP_IND_G_IN_12_SELECT_INPUT,
- MX51_HSC_MIPI_MIX_IPP_IND_SENS1_DATA_EN_SELECT_INPUT,
- MX51_HSC_MIPI_MIX_IPP_IND_SENS2_DATA_EN_SELECT_INPUT,
- /* TO2 */
- MX51_HSC_MIPI_MIX_PAR_VSYNC_SELECT_INPUT,
- /* TO2 */
- MX51_HSC_MIPI_MIX_PAR_DI_WAIT_SELECT_INPUT,
- MX51_HSC_MIPI_MIX_PAR_SISG_TRIG_SELECT_INPUT,
- MX51_I2C1_IPP_SCL_IN_SELECT_INPUT,
- MX51_I2C1_IPP_SDA_IN_SELECT_INPUT,
- MX51_I2C2_IPP_SCL_IN_SELECT_INPUT,
- MX51_I2C2_IPP_SDA_IN_SELECT_INPUT,
- MX51_IPU_IPP_DI_0_IND_DISPB_SD_D_SELECT_INPUT,
- MX51_IPU_IPP_DI_1_IND_DISPB_SD_D_SELECT_INPUT,
- MX51_KPP_IPP_IND_COL_6_SELECT_INPUT,
- MX51_KPP_IPP_IND_COL_7_SELECT_INPUT,
- MX51_KPP_IPP_IND_ROW_4_SELECT_INPUT,
- MX51_KPP_IPP_IND_ROW_5_SELECT_INPUT,
- MX51_KPP_IPP_IND_ROW_6_SELECT_INPUT,
- MX51_KPP_IPP_IND_ROW_7_SELECT_INPUT,
- MX51_UART1_IPP_UART_RTS_B_SELECT_INPUT,
- MX51_UART1_IPP_UART_RXD_MUX_SELECT_INPUT,
- MX51_UART2_IPP_UART_RTS_B_SELECT_INPUT,
- MX51_UART2_IPP_UART_RXD_MUX_SELECT_INPUT,
- MX51_UART3_IPP_UART_RTS_B_SELECT_INPUT,
- MX51_UART3_IPP_UART_RXD_MUX_SELECT_INPUT,
- MX51_USBOH3_IPP_IND_UH3_CLK_SELECT_INPUT,
- MX51_USBOH3_IPP_IND_UH3_DATA_0_SELECT_INPUT,
- MX51_USBOH3_IPP_IND_UH3_DATA_1_SELECT_INPUT,
- MX51_USBOH3_IPP_IND_UH3_DATA_2_SELECT_INPUT,
- MX51_USBOH3_IPP_IND_UH3_DATA_3_SELECT_INPUT,
- MX51_USBOH3_IPP_IND_UH3_DATA_4_SELECT_INPUT,
- MX51_USBOH3_IPP_IND_UH3_DATA_5_SELECT_INPUT,
- MX51_USBOH3_IPP_IND_UH3_DATA_6_SELECT_INPUT,
- MX51_USBOH3_IPP_IND_UH3_DATA_7_SELECT_INPUT,
- MX51_USBOH3_IPP_IND_UH3_DIR_SELECT_INPUT,
- MX51_USBOH3_IPP_IND_UH3_NXT_SELECT_INPUT,
- MX51_USBOH3_IPP_IND_UH3_STP_SELECT_INPUT,
- MX51PUT_NUM_MUX,
- /* MX53 */
- MX53_AUDMUX_P4_INPUT_DA_AMX_SELECT_I = 0,
- MX53_AUDMUX_P4_INPUT_DB_AMX_SELECT_I,
- MX53_AUDMUX_P4_INPUT_RXCLK_AMX_SELECT_INPUT,
- MX53_AUDMUX_P4_INPUT_RXFS_AMX_SELECT_INPUT,
- MX53_AUDMUX_P4_INPUT_TXCLK_AMX_SELECT_INPUT,
- MX53_AUDMUX_P4_INPUT_TXFS_AMX_SELECT_INPUT,
- MX53_AUDMUX_P5_INPUT_DA_AMX_SELECT_I,
- MX53_AUDMUX_P5_INPUT_DB_AMX_SELECT_I,
- MX53_AUDMUX_P5_INPUT_RXCLK_AMX_SELECT_INPUT,
- MX53_AUDMUX_P5_INPUT_RXFS_AMX_SELECT_INPUT,
- MX53_AUDMUX_P5_INPUT_TXCLK_AMX_SELECT_INPUT,
- MX53_AUDMUX_P5_INPUT_TXFS_AMX_SELECT_INPUT,
- MX53_CAN1_IPP_IND_CANRX_SELECT_INPUT,
- MX53_CAN2_IPP_IND_CANRX_SELECT_INPUT,
- MX53_CCM_IPP_ASRC_EXT_SELECT_INPUT,
- MX53_CCM_IPP_DI1_CLK_SELECT_INPUT,
- MX53_CCM_PLL1_BYPASS_CLK_SELECT_INPUT,
- MX53_CCM_PLL2_BYPASS_CLK_SELECT_INPUT,
- MX53_CCM_PLL3_BYPASS_CLK_SELECT_INPUT,
- MX53_CCM_PLL4_BYPASS_CLK_SELECT_INPUT,
- MX53_CSPI_IPP_CSPI_CLK_IN_SELECT_INPUT,
- MX53_CSPI_IPP_IND_MISO_SELECT_INPUT,
- MX53_CSPI_IPP_IND_MOSI_SELECT_INPUT,
- MX53_CSPI_IPP_IND_SS_B_0_SELECT_INPUT,
- MX53_CSPI_IPP_IND_SS_B_1_SELECT_INPUT,
- MX53_CSPI_IPP_IND_SS_B_2_SELECT_INPUT,
- MX53_CSPI_IPP_IND_SS_B_3_SELECT_INPUT,
- MX53_ECSPI1_IPP_CSPI_CLK_IN_SELECT_INPUT,
- MX53_ECSPI1_IPP_IND_MISO_SELECT_INPUT,
- MX53_ECSPI1_IPP_IND_MOSI_SELECT_INPUT,
- MX53_ECSPI1_IPP_IND_SS_B_0_SELECT_INPUT,
- MX53_ECSPI1_IPP_IND_SS_B_1_SELECT_INPUT,
- MX53_ECSPI1_IPP_IND_SS_B_2_SELECT_INPUT,
- MX53_ECSPI1_IPP_IND_SS_B_3_SELECT_INPUT,
- MX53_ECSPI2_IPP_CSPI_CLK_IN_SELECT_INPUT,
- MX53_ECSPI2_IPP_IND_MISO_SELECT_INPUT,
- MX53_ECSPI2_IPP_IND_MOSI_SELECT_INPUT,
- MX53_ECSPI2_IPP_IND_SS_B_0_SELECT_INPUT,
- MX53_ECSPI2_IPP_IND_SS_B_1_SELECT_INPUT,
- MX53_ESAI1_IPP_IND_FSR_SELECT_INPUT,
- MX53_ESAI1_IPP_IND_FST_SELECT_INPUT,
- MX53_ESAI1_IPP_IND_HCKR_SELECT_INPUT,
- MX53_ESAI1_IPP_IND_HCKT_SELECT_INPUT,
- MX53_ESAI1_IPP_IND_SCKR_SELECT_INPUT,
- MX53_ESAI1_IPP_IND_SCKT_SELECT_INPUT,
- MX53_ESAI1_IPP_IND_SDO0_SELECT_INPUT,
- MX53_ESAI1_IPP_IND_SDO1_SELECT_INPUT,
- MX53_ESAI1_IPP_IND_SDO2_SDI3_SELECT_INPUT,
- MX53_ESAI1_IPP_IND_SDO3_SDI2_SELECT_INPUT,
- MX53_ESAI1_IPP_IND_SDO4_SDI1_SELECT_INPUT,
- MX53_ESAI1_IPP_IND_SDO5_SDI0_SELECT_INPUT,
- MX53_ESDHC1_IPP_WP_ON_SELECT_INPUT,
- MX53_FEC_FEC_COL_SELECT_INPUT,
- MX53_FEC_FEC_MDI_SELECT_INPUT,
- MX53_FEC_FEC_RX_CLK_SELECT_INPUT,
- MX53_FIRI_IPP_IND_RXD_SELECT_INPUT,
- MX53_GPC_PMIC_RDY_SELECT_INPUT,
- MX53_I2C1_IPP_SCL_IN_SELECT_INPUT,
- MX53_I2C1_IPP_SDA_IN_SELECT_INPUT,
- MX53_I2C2_IPP_SCL_IN_SELECT_INPUT,
- MX53_I2C2_IPP_SDA_IN_SELECT_INPUT,
- MX53_I2C3_IPP_SCL_IN_SELECT_INPUT,
- MX53_I2C3_IPP_SDA_IN_SELECT_INPUT,
- MX53_IPU_IPP_DI_0_IND_DISPB_SD_D_SELECT_INPUT,
- MX53_IPU_IPP_DI_1_IND_DISPB_SD_D_SELECT_INPUT,
- MX53_IPU_IPP_IND_SENS1_DATA_EN_SELECT_INPUT,
- MX53_IPU_IPP_IND_SENS1_HSYNC_SELECT_INPUT,
- MX53_IPU_IPP_IND_SENS1_VSYNC_SELECT_INPUT,
- MX53_KPP_IPP_IND_COL_5_SELECT_INPUT,
- MX53_KPP_IPP_IND_COL_6_SELECT_INPUT,
- MX53_KPP_IPP_IND_COL_7_SELECT_INPUT,
- MX53_KPP_IPP_IND_ROW_5_SELECT_INPUT,
- MX53_KPP_IPP_IND_ROW_6_SELECT_INPUT,
- MX53_KPP_IPP_IND_ROW_7_SELECT_INPUT,
- MX53_MLB_MLBCLK_IN_SELECT_INPUT,
- MX53_MLB_MLBDAT_IN_SELECT_INPUT,
- MX53_MLB_MLBSIG_IN_SELECT_INPUT,
- MX53_OWIRE_BATTERY_LINE_IN_SELECT_INPUT,
- MX53_SDMA_EVENTS_14_SELECT_INPUT,
- MX53_SDMA_EVENTS_15_SELECT_INPUT,
- MX53_SPDIF_SPDIF_IN1_SELECT_INPUT,
- MX53_UART1_IPP_UART_RTS_B_SELECT_INPUT,
- MX53_UART1_IPP_UART_RXD_MUX_SELECT_INPUT,
- MX53_UART2_IPP_UART_RTS_B_SELECT_INPUT,
- MX53_UART2_IPP_UART_RXD_MUX_SELECT_INPUT,
- MX53_UART3_IPP_UART_RTS_B_SELECT_INPUT,
- MX53_UART3_IPP_UART_RXD_MUX_SELECT_INPUT,
- MX53_UART4_IPP_UART_RTS_B_SELECT_INPUT,
- MX53_UART4_IPP_UART_RXD_MUX_SELECT_INPUT,
- MX53_UART5_IPP_UART_RTS_B_SELECT_INPUT,
- MX53_UART5_IPP_UART_RXD_MUX_SELECT_INPUT,
- MX53_USBOH3_IPP_IND_OTG_OC_SELECT_INPUT,
- MX53_USBOH3_IPP_IND_UH1_OC_SELECT_INPUT,
- MX53_USBOH3_IPP_IND_UH2_OC_SELECT_INPUT,
-} iomux_input_select_t;
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_ARCH_MX5_MX5X_PINS_H__ */
diff --git a/arch/arm/include/asm/arch-mx5/spl.h b/arch/arm/include/asm/arch-mx5/spl.h
new file mode 100644
index 0000000..e0b6e3e
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx5/spl.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2013 Marek Vasut <marex@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef __ASM_ARCH_SPL_H__
+#define __ASM_ARCH_SPL_H__
+
+#define BOOT_DEVICE_NONE 0
+#define BOOT_DEVICE_NAND 1
+
+#endif /* __ASM_ARCH_SPL_H__ */
diff --git a/arch/arm/include/asm/arch-mx6/clock.h b/arch/arm/include/asm/arch-mx6/clock.h
index db377cc..cfd4edc 100644
--- a/arch/arm/include/asm/arch-mx6/clock.h
+++ b/arch/arm/include/asm/arch-mx6/clock.h
@@ -61,6 +61,7 @@
u32 imx_get_uartclk(void);
u32 imx_get_fecclk(void);
unsigned int mxc_get_clock(enum mxc_clock clk);
+void enable_ocotp_clk(unsigned char enable);
void enable_usboh3_clk(unsigned char enable);
int enable_sata_clock(void);
int enable_i2c_clk(unsigned char enable, unsigned i2c_num);
diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h
index 7676457..aa9747c 100644
--- a/arch/arm/include/asm/arch-mx6/crm_regs.h
+++ b/arch/arm/include/asm/arch-mx6/crm_regs.h
@@ -20,6 +20,7 @@
#ifndef __ARCH_ARM_MACH_MX6_CCM_REGS_H__
#define __ARCH_ARM_MACH_MX6_CCM_REGS_H__
+#define CCM_CCOSR 0x020c4060
#define CCM_CCGR0 0x020C4068
#define CCM_CCGR1 0x020C406c
#define CCM_CCGR2 0x020C4070
@@ -244,7 +245,12 @@
#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK (0x7 << 8)
#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET 6
#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK (0x3 << 6)
+#ifdef CONFIG_MX6SL
+#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK 0x1F
+#define MXC_CCM_CSCDR1_UART_CLK_SEL (1 << 6)
+#else
#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK 0x3F
+#endif
#define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET 0
/* Define the bits in register CS1CDR */
@@ -262,10 +268,13 @@
/* Define the bits in register CS2CDR */
#define MXC_CCM_CS2CDR_ENFC_CLK_PODF_MASK (0x3F << 21)
#define MXC_CCM_CS2CDR_ENFC_CLK_PODF_OFFSET 21
+#define MXC_CCM_CS2CDR_ENFC_CLK_PODF(v) (((v) & 0x3f) << 21)
#define MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK (0x7 << 18)
#define MXC_CCM_CS2CDR_ENFC_CLK_PRED_OFFSET 18
+#define MXC_CCM_CS2CDR_ENFC_CLK_PRED(v) (((v) & 0x7) << 18)
#define MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK (0x3 << 16)
#define MXC_CCM_CS2CDR_ENFC_CLK_SEL_OFFSET 16
+#define MXC_CCM_CS2CDR_ENFC_CLK_SEL(v) (((v) & 0x3) << 16)
#define MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK (0x7 << 12)
#define MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET 12
#define MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK (0x7 << 9)
@@ -412,183 +421,183 @@
#define MXC_CCM_CCGR_CG_MASK 3
#define MXC_CCM_CCGR0_AIPS_TZ1_OFFSET 0
-#define MXC_CCM_CCGR0_AIPS_TZ1_MASK (3<<MXC_CCM_CCGR0_AIPS_TZ1_OFFSET)
+#define MXC_CCM_CCGR0_AIPS_TZ1_MASK (3 << MXC_CCM_CCGR0_AIPS_TZ1_OFFSET)
#define MXC_CCM_CCGR0_AIPS_TZ2_OFFSET 2
-#define MXC_CCM_CCGR0_AIPS_TZ2_MASK (3<<MXC_CCM_CCGR0_AIPS_TZ2_OFFSET)
-#define MXC_CCM_CCGR0_APBHDMA HCLK_OFFSET 4
-#define MXC_CCM_CCGR0_AMASK (3<<MXC_CCM_CCGR0_APBHDMA)
+#define MXC_CCM_CCGR0_AIPS_TZ2_MASK (3 << MXC_CCM_CCGR0_AIPS_TZ2_OFFSET)
+#define MXC_CCM_CCGR0_APBHDMA_OFFSET 4
+#define MXC_CCM_CCGR0_APBHDMA_MASK (3 << MXC_CCM_CCGR0_APBHDMA_OFFSET)
#define MXC_CCM_CCGR0_ASRC_OFFSET 6
-#define MXC_CCM_CCGR0_ASRC_MASK (3<<MXC_CCM_CCGR0_ASRC_OFFSET)
+#define MXC_CCM_CCGR0_ASRC_MASK (3 << MXC_CCM_CCGR0_ASRC_OFFSET)
#define MXC_CCM_CCGR0_CAAM_SECURE_MEM_OFFSET 8
-#define MXC_CCM_CCGR0_CAAM_SECURE_MEM_MASK (3<<MXC_CCM_CCGR0_CAAM_SECURE_MEM_OFFSET)
+#define MXC_CCM_CCGR0_CAAM_SECURE_MEM_MASK (3 << MXC_CCM_CCGR0_CAAM_SECURE_MEM_OFFSET)
#define MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_OFFSET 10
-#define MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_MASK (3<<MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_OFFSET)
+#define MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_MASK (3 << MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_OFFSET)
#define MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_OFFSET 12
-#define MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_MASK (3<<MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_OFFSET)
+#define MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_MASK (3 << MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_OFFSET)
#define MXC_CCM_CCGR0_CAN1_OFFSET 14
-#define MXC_CCM_CCGR0_CAN1_MASK (3<<MXC_CCM_CCGR0_CAN1_OFFSET)
+#define MXC_CCM_CCGR0_CAN1_MASK (3 << MXC_CCM_CCGR0_CAN1_OFFSET)
#define MXC_CCM_CCGR0_CAN1_SERIAL_OFFSET 16
-#define MXC_CCM_CCGR0_CAN1_SERIAL_MASK (3<<MXC_CCM_CCGR0_CAN1_SERIAL_OFFSET)
+#define MXC_CCM_CCGR0_CAN1_SERIAL_MASK (3 << MXC_CCM_CCGR0_CAN1_SERIAL_OFFSET)
#define MXC_CCM_CCGR0_CAN2_OFFSET 18
-#define MXC_CCM_CCGR0_CAN2_MASK (3<<MXC_CCM_CCGR0_CAN2_OFFSET)
+#define MXC_CCM_CCGR0_CAN2_MASK (3 << MXC_CCM_CCGR0_CAN2_OFFSET)
#define MXC_CCM_CCGR0_CAN2_SERIAL_OFFSET 20
-#define MXC_CCM_CCGR0_CAN2_SERIAL_MASK (3<<MXC_CCM_CCGR0_CAN2_SERIAL_OFFSET)
+#define MXC_CCM_CCGR0_CAN2_SERIAL_MASK (3 << MXC_CCM_CCGR0_CAN2_SERIAL_OFFSET)
#define MXC_CCM_CCGR0_CHEETAH_DBG_CLK_OFFSET 22
-#define MXC_CCM_CCGR0_CHEETAH_DBG_CLK_MASK (3<<MXC_CCM_CCGR0_CHEETAH_DBG_CLK_OFFSET)
+#define MXC_CCM_CCGR0_CHEETAH_DBG_CLK_MASK (3 << MXC_CCM_CCGR0_CHEETAH_DBG_CLK_OFFSET)
#define MXC_CCM_CCGR0_DCIC1_OFFSET 24
-#define MXC_CCM_CCGR0_DCIC1_MASK (3<<MXC_CCM_CCGR0_DCIC1_OFFSET)
+#define MXC_CCM_CCGR0_DCIC1_MASK (3 << MXC_CCM_CCGR0_DCIC1_OFFSET)
#define MXC_CCM_CCGR0_DCIC2_OFFSET 26
-#define MXC_CCM_CCGR0_DCIC2_MASK (3<<MXC_CCM_CCGR0_DCIC2_OFFSET)
+#define MXC_CCM_CCGR0_DCIC2_MASK (3 << MXC_CCM_CCGR0_DCIC2_OFFSET)
#define MXC_CCM_CCGR0_DTCP_OFFSET 28
-#define MXC_CCM_CCGR0_DTCP_MASK (3<<MXC_CCM_CCGR0_DTCP_OFFSET)
+#define MXC_CCM_CCGR0_DTCP_MASK (3 << MXC_CCM_CCGR0_DTCP_OFFSET)
#define MXC_CCM_CCGR1_ECSPI1S_OFFSET 0
-#define MXC_CCM_CCGR1_ECSPI1S_MASK (3<<MXC_CCM_CCGR1_ECSPI1S_OFFSET)
+#define MXC_CCM_CCGR1_ECSPI1S_MASK (3 << MXC_CCM_CCGR1_ECSPI1S_OFFSET)
#define MXC_CCM_CCGR1_ECSPI2S_OFFSET 2
-#define MXC_CCM_CCGR1_ECSPI2S_MASK (3<<MXC_CCM_CCGR1_ECSPI2S_OFFSET)
+#define MXC_CCM_CCGR1_ECSPI2S_MASK (3 << MXC_CCM_CCGR1_ECSPI2S_OFFSET)
#define MXC_CCM_CCGR1_ECSPI3S_OFFSET 4
-#define MXC_CCM_CCGR1_ECSPI3S_MASK (3<<MXC_CCM_CCGR1_ECSPI3S_OFFSET)
+#define MXC_CCM_CCGR1_ECSPI3S_MASK (3 << MXC_CCM_CCGR1_ECSPI3S_OFFSET)
#define MXC_CCM_CCGR1_ECSPI4S_OFFSET 6
-#define MXC_CCM_CCGR1_ECSPI4S_MASK (3<<MXC_CCM_CCGR1_ECSPI4S_OFFSET)
+#define MXC_CCM_CCGR1_ECSPI4S_MASK (3 << MXC_CCM_CCGR1_ECSPI4S_OFFSET)
#define MXC_CCM_CCGR1_ECSPI5S_OFFSET 8
-#define MXC_CCM_CCGR1_ECSPI5S_MASK (3<<MXC_CCM_CCGR1_ECSPI5S_OFFSET)
+#define MXC_CCM_CCGR1_ECSPI5S_MASK (3 << MXC_CCM_CCGR1_ECSPI5S_OFFSET)
#define MXC_CCM_CCGR1_ENET_CLK_ENABLE_OFFSET 10
-#define MXC_CCM_CCGR1_ENET_CLK_ENABLE_MASK (3<<MXC_CCM_CCGR1_ENET_CLK_ENABLE_OFFSET)
+#define MXC_CCM_CCGR1_ENET_CLK_ENABLE_MASK (3 << MXC_CCM_CCGR1_ENET_CLK_ENABLE_OFFSET)
#define MXC_CCM_CCGR1_EPIT1S_OFFSET 12
-#define MXC_CCM_CCGR1_EPIT1S_MASK (3<<MXC_CCM_CCGR1_EPIT1S_OFFSET)
+#define MXC_CCM_CCGR1_EPIT1S_MASK (3 << MXC_CCM_CCGR1_EPIT1S_OFFSET)
#define MXC_CCM_CCGR1_EPIT2S_OFFSET 14
-#define MXC_CCM_CCGR1_EPIT2S_MASK (3<<MXC_CCM_CCGR1_EPIT2S_OFFSET)
+#define MXC_CCM_CCGR1_EPIT2S_MASK (3 << MXC_CCM_CCGR1_EPIT2S_OFFSET)
#define MXC_CCM_CCGR1_ESAIS_OFFSET 16
-#define MXC_CCM_CCGR1_ESAIS_MASK (3<<MXC_CCM_CCGR1_ESAIS_OFFSET)
+#define MXC_CCM_CCGR1_ESAIS_MASK (3 << MXC_CCM_CCGR1_ESAIS_OFFSET)
#define MXC_CCM_CCGR1_GPT_BUS_OFFSET 20
-#define MXC_CCM_CCGR1_GPT_BUS_MASK (3<<MXC_CCM_CCGR1_GPT_BUS_OFFSET)
+#define MXC_CCM_CCGR1_GPT_BUS_MASK (3 << MXC_CCM_CCGR1_GPT_BUS_OFFSET)
#define MXC_CCM_CCGR1_GPT_SERIAL_OFFSET 22
-#define MXC_CCM_CCGR1_GPT_SERIAL_MASK (3<<MXC_CCM_CCGR1_GPT_SERIAL_OFFSET)
+#define MXC_CCM_CCGR1_GPT_SERIAL_MASK (3 << MXC_CCM_CCGR1_GPT_SERIAL_OFFSET)
#define MXC_CCM_CCGR1_GPU2D_OFFSET 24
-#define MXC_CCM_CCGR1_GPU2D_MASK (3<<MXC_CCM_CCGR1_GPU2D_OFFSET)
+#define MXC_CCM_CCGR1_GPU2D_MASK (3 << MXC_CCM_CCGR1_GPU2D_OFFSET)
#define MXC_CCM_CCGR1_GPU3D_OFFSET 26
-#define MXC_CCM_CCGR1_GPU3D_MASK (3<<MXC_CCM_CCGR1_GPU3D_OFFSET)
+#define MXC_CCM_CCGR1_GPU3D_MASK (3 << MXC_CCM_CCGR1_GPU3D_OFFSET)
#define MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_OFFSET 0
-#define MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_MASK (3<<MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_OFFSET)
+#define MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_MASK (3 << MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_OFFSET)
#define MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_OFFSET 4
-#define MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_MASK (3<<MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_OFFSET)
+#define MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_MASK (3 << MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_OFFSET)
#define MXC_CCM_CCGR2_I2C1_SERIAL_OFFSET 6
-#define MXC_CCM_CCGR2_I2C1_SERIAL_MASK (3<<MXC_CCM_CCGR2_I2C1_SERIAL_OFFSET)
+#define MXC_CCM_CCGR2_I2C1_SERIAL_MASK (3 << MXC_CCM_CCGR2_I2C1_SERIAL_OFFSET)
#define MXC_CCM_CCGR2_I2C2_SERIAL_OFFSET 8
-#define MXC_CCM_CCGR2_I2C2_SERIAL_MASK (3<<MXC_CCM_CCGR2_I2C2_SERIAL_OFFSET)
+#define MXC_CCM_CCGR2_I2C2_SERIAL_MASK (3 << MXC_CCM_CCGR2_I2C2_SERIAL_OFFSET)
#define MXC_CCM_CCGR2_I2C3_SERIAL_OFFSET 10
-#define MXC_CCM_CCGR2_I2C3_SERIAL_MASK (3<<MXC_CCM_CCGR2_I2C3_SERIAL_OFFSET)
+#define MXC_CCM_CCGR2_I2C3_SERIAL_MASK (3 << MXC_CCM_CCGR2_I2C3_SERIAL_OFFSET)
#define MXC_CCM_CCGR2_OCOTP_CTRL_OFFSET 12
-#define MXC_CCM_CCGR2_OCOTP_CTRL_MASK (3<<MXC_CCM_CCGR2_OCOTP_CTRL_OFFSET)
+#define MXC_CCM_CCGR2_OCOTP_CTRL_MASK (3 << MXC_CCM_CCGR2_OCOTP_CTRL_OFFSET)
#define MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_OFFSET 14
-#define MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK (3<<MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_OFFSET)
+#define MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK (3 << MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_OFFSET)
#define MXC_CCM_CCGR2_IPMUX1_OFFSET 16
-#define MXC_CCM_CCGR2_IPMUX1_MASK (3<<MXC_CCM_CCGR2_IPMUX1_OFFSET)
+#define MXC_CCM_CCGR2_IPMUX1_MASK (3 << MXC_CCM_CCGR2_IPMUX1_OFFSET)
#define MXC_CCM_CCGR2_IPMUX2_OFFSET 18
-#define MXC_CCM_CCGR2_IPMUX2_MASK (3<<MXC_CCM_CCGR2_IPMUX2_OFFSET)
+#define MXC_CCM_CCGR2_IPMUX2_MASK (3 << MXC_CCM_CCGR2_IPMUX2_OFFSET)
#define MXC_CCM_CCGR2_IPMUX3_OFFSET 20
-#define MXC_CCM_CCGR2_IPMUX3_MASK (3<<MXC_CCM_CCGR2_IPMUX3_OFFSET)
+#define MXC_CCM_CCGR2_IPMUX3_MASK (3 << MXC_CCM_CCGR2_IPMUX3_OFFSET)
#define MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC1_IPGS_OFFSET 22
-#define MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC1_IPGS_MASK (3<<MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC1_IPGS_OFFSET)
+#define MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC1_IPGS_MASK (3 << MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC1_IPGS_OFFSET)
#define MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC2_IPG_OFFSET 24
-#define MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC2_IPG_MASK (3<<MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC2_IPG_OFFSET)
+#define MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC2_IPG_MASK (3 << MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC2_IPG_OFFSET)
#define MXC_CCM_CCGR2_IPSYNC_VDOA_IPG_MASTER_CLK_OFFSET 26
-#define MXC_CCM_CCGR2_IPSYNC_VDOA_IPG_MASTER_CLK_MASK (3<<MXC_CCM_CCGR2_IPSYNC_VDOA_IPG_MASTER_CLK_OFFSET)
+#define MXC_CCM_CCGR2_IPSYNC_VDOA_IPG_MASTER_CLK_MASK (3 << MXC_CCM_CCGR2_IPSYNC_VDOA_IPG_MASTER_CLK_OFFSET)
#define MXC_CCM_CCGR3_IPU1_IPU_OFFSET 0
-#define MXC_CCM_CCGR3_IPU1_IPU_MASK (3<<MXC_CCM_CCGR3_IPU1_IPU_OFFSET)
+#define MXC_CCM_CCGR3_IPU1_IPU_MASK (3 << MXC_CCM_CCGR3_IPU1_IPU_OFFSET)
#define MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET 2
-#define MXC_CCM_CCGR3_IPU1_IPU_DI0_MASK (3<<MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET)
+#define MXC_CCM_CCGR3_IPU1_IPU_DI0_MASK (3 << MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET)
#define MXC_CCM_CCGR3_IPU1_IPU_DI1_OFFSET 4
-#define MXC_CCM_CCGR3_IPU1_IPU_DI1_MASK (3<<MXC_CCM_CCGR3_IPU1_IPU_DI1_OFFSET)
+#define MXC_CCM_CCGR3_IPU1_IPU_DI1_MASK (3 << MXC_CCM_CCGR3_IPU1_IPU_DI1_OFFSET)
#define MXC_CCM_CCGR3_IPU2_IPU_OFFSET 6
-#define MXC_CCM_CCGR3_IPU2_IPU_MASK (3<<MXC_CCM_CCGR3_IPU2_IPU_OFFSET)
+#define MXC_CCM_CCGR3_IPU2_IPU_MASK (3 << MXC_CCM_CCGR3_IPU2_IPU_OFFSET)
#define MXC_CCM_CCGR3_IPU2_IPU_DI0_OFFSET 8
-#define MXC_CCM_CCGR3_IPU2_IPU_DI0_MASK (3<<MXC_CCM_CCGR3_IPU2_IPU_DI0_OFFSET)
+#define MXC_CCM_CCGR3_IPU2_IPU_DI0_MASK (3 << MXC_CCM_CCGR3_IPU2_IPU_DI0_OFFSET)
#define MXC_CCM_CCGR3_IPU2_IPU_DI1_OFFSET 10
-#define MXC_CCM_CCGR3_IPU2_IPU_DI1_MASK (3<<MXC_CCM_CCGR3_IPU2_IPU_DI1_OFFSET)
+#define MXC_CCM_CCGR3_IPU2_IPU_DI1_MASK (3 << MXC_CCM_CCGR3_IPU2_IPU_DI1_OFFSET)
#define MXC_CCM_CCGR3_LDB_DI0_OFFSET 12
-#define MXC_CCM_CCGR3_LDB_DI0_MASK (3<<MXC_CCM_CCGR3_LDB_DI0_OFFSET)
+#define MXC_CCM_CCGR3_LDB_DI0_MASK (3 << MXC_CCM_CCGR3_LDB_DI0_OFFSET)
#define MXC_CCM_CCGR3_LDB_DI1_OFFSET 14
-#define MXC_CCM_CCGR3_LDB_DI1_MASK (3<<MXC_CCM_CCGR3_LDB_DI1_OFFSET)
+#define MXC_CCM_CCGR3_LDB_DI1_MASK (3 << MXC_CCM_CCGR3_LDB_DI1_OFFSET)
#define MXC_CCM_CCGR3_MIPI_CORE_CFG_OFFSET 16
-#define MXC_CCM_CCGR3_MIPI_CORE_CFG_MASK (3<<MXC_CCM_CCGR3_MIPI_CORE_CFG_OFFSET)
+#define MXC_CCM_CCGR3_MIPI_CORE_CFG_MASK (3 << MXC_CCM_CCGR3_MIPI_CORE_CFG_OFFSET)
#define MXC_CCM_CCGR3_MLB_OFFSET 18
-#define MXC_CCM_CCGR3_MLB_MASK (3<<MXC_CCM_CCGR3_MLB_OFFSET)
+#define MXC_CCM_CCGR3_MLB_MASK (3 << MXC_CCM_CCGR3_MLB_OFFSET)
#define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P0_OFFSET 20
-#define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P0_MASK (3<<MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P0_OFFSET)
+#define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P0_MASK (3 << MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P0_OFFSET)
#define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P1_OFFSET 22
-#define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P1_MASK (3<<MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P1_OFFSET)
+#define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P1_MASK (3 << MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P1_OFFSET)
#define MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P0_OFFSET 24
-#define MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P0_MASK (3<<MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P0_OFFSET)
+#define MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P0_MASK (3 << MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P0_OFFSET)
#define MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P1_OFFSET 26
-#define MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P1_MASK (3<<MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P1_OFFSET)
+#define MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P1_MASK (3 << MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P1_OFFSET)
#define MXC_CCM_CCGR3_OCRAM_OFFSET 28
-#define MXC_CCM_CCGR3_OCRAM_MASK (3<<MXC_CCM_CCGR3_OCRAM_OFFSET)
+#define MXC_CCM_CCGR3_OCRAM_MASK (3 << MXC_CCM_CCGR3_OCRAM_OFFSET)
#define MXC_CCM_CCGR3_OPENVGAXICLK_OFFSET 30
-#define MXC_CCM_CCGR3_OPENVGAXICLK_MASK (3<<MXC_CCM_CCGR3_OPENVGAXICLK_OFFSET)
+#define MXC_CCM_CCGR3_OPENVGAXICLK_MASK (3 << MXC_CCM_CCGR3_OPENVGAXICLK_OFFSET)
#define MXC_CCM_CCGR4_PCIE_OFFSET 0
-#define MXC_CCM_CCGR4_PCIE_MASK (3<<MXC_CCM_CCGR4_PCIE_OFFSET)
+#define MXC_CCM_CCGR4_PCIE_MASK (3 << MXC_CCM_CCGR4_PCIE_OFFSET)
#define MXC_CCM_CCGR4_PL301_MX6QFAST1_S133_OFFSET 8
-#define MXC_CCM_CCGR4_PL301_MX6QFAST1_S133_MASK (3<<MXC_CCM_CCGR4_PL301_MX6QFAST1_S133_OFFSET)
+#define MXC_CCM_CCGR4_PL301_MX6QFAST1_S133_MASK (3 << MXC_CCM_CCGR4_PL301_MX6QFAST1_S133_OFFSET)
#define MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET 12
-#define MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK (3<<MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET)
+#define MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK (3 << MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET)
#define MXC_CCM_CCGR4_PL301_MX6QPER2_MAINCLK_ENABLE_OFFSET 14
-#define MXC_CCM_CCGR4_PL301_MX6QPER2_MAINCLK_ENABLE_MASK (3<<MXC_CCM_CCGR4_PL301_MX6QPER2_MAINCLK_ENABLE_OFFSET)
+#define MXC_CCM_CCGR4_PL301_MX6QPER2_MAINCLK_ENABLE_MASK (3 << MXC_CCM_CCGR4_PL301_MX6QPER2_MAINCLK_ENABLE_OFFSET)
#define MXC_CCM_CCGR4_PWM1_OFFSET 16
-#define MXC_CCM_CCGR4_PWM1_MASK (3<<MXC_CCM_CCGR4_PWM1_OFFSET)
+#define MXC_CCM_CCGR4_PWM1_MASK (3 << MXC_CCM_CCGR4_PWM1_OFFSET)
#define MXC_CCM_CCGR4_PWM2_OFFSET 18
-#define MXC_CCM_CCGR4_PWM2_MASK (3<<MXC_CCM_CCGR4_PWM2_OFFSET)
+#define MXC_CCM_CCGR4_PWM2_MASK (3 << MXC_CCM_CCGR4_PWM2_OFFSET)
#define MXC_CCM_CCGR4_PWM3_OFFSET 20
-#define MXC_CCM_CCGR4_PWM3_MASK (3<<MXC_CCM_CCGR4_PWM3_OFFSET)
+#define MXC_CCM_CCGR4_PWM3_MASK (3 << MXC_CCM_CCGR4_PWM3_OFFSET)
#define MXC_CCM_CCGR4_PWM4_OFFSET 22
-#define MXC_CCM_CCGR4_PWM4_MASK (3<<MXC_CCM_CCGR4_PWM4_OFFSET)
+#define MXC_CCM_CCGR4_PWM4_MASK (3 << MXC_CCM_CCGR4_PWM4_OFFSET)
#define MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_OFFSET 24
-#define MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK (3<<MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_OFFSET)
+#define MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK (3 << MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_OFFSET)
#define MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_OFFSET 26
-#define MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK (3<<MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_OFFSET)
+#define MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK (3 << MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_OFFSET)
#define MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_OFFSET 28
-#define MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK (3<<MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_OFFSET)
+#define MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK (3 << MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_OFFSET)
#define MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_OFFSET 30
-#define MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK (3<<MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_OFFSET)
+#define MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK (3 << MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_OFFSET)
#define MXC_CCM_CCGR5_ROM_OFFSET 0
-#define MXC_CCM_CCGR5_ROM_MASK (3<<MXC_CCM_CCGR5_ROM_OFFSET)
+#define MXC_CCM_CCGR5_ROM_MASK (3 << MXC_CCM_CCGR5_ROM_OFFSET)
#define MXC_CCM_CCGR5_SATA_OFFSET 4
-#define MXC_CCM_CCGR5_SATA_MASK (3<<MXC_CCM_CCGR5_SATA_OFFSET)
+#define MXC_CCM_CCGR5_SATA_MASK (3 << MXC_CCM_CCGR5_SATA_OFFSET)
#define MXC_CCM_CCGR5_SDMA_OFFSET 6
-#define MXC_CCM_CCGR5_SDMA_MASK (3<<MXC_CCM_CCGR5_SDMA_OFFSET)
+#define MXC_CCM_CCGR5_SDMA_MASK (3 << MXC_CCM_CCGR5_SDMA_OFFSET)
#define MXC_CCM_CCGR5_SPBA_OFFSET 12
-#define MXC_CCM_CCGR5_SPBA_MASK (3<<MXC_CCM_CCGR5_SPBA_OFFSET)
+#define MXC_CCM_CCGR5_SPBA_MASK (3 << MXC_CCM_CCGR5_SPBA_OFFSET)
#define MXC_CCM_CCGR5_SPDIF_OFFSET 14
-#define MXC_CCM_CCGR5_SPDIF_MASK (3<<MXC_CCM_CCGR5_SPDIF_OFFSET)
+#define MXC_CCM_CCGR5_SPDIF_MASK (3 << MXC_CCM_CCGR5_SPDIF_OFFSET)
#define MXC_CCM_CCGR5_SSI1_OFFSET 18
-#define MXC_CCM_CCGR5_SSI1_MASK (3<<MXC_CCM_CCGR5_SSI1_OFFSET)
+#define MXC_CCM_CCGR5_SSI1_MASK (3 << MXC_CCM_CCGR5_SSI1_OFFSET)
#define MXC_CCM_CCGR5_SSI2_OFFSET 20
-#define MXC_CCM_CCGR5_SSI2_MASK (3<<MXC_CCM_CCGR5_SSI2_OFFSET)
+#define MXC_CCM_CCGR5_SSI2_MASK (3 << MXC_CCM_CCGR5_SSI2_OFFSET)
#define MXC_CCM_CCGR5_SSI3_OFFSET 22
-#define MXC_CCM_CCGR5_SSI3_MASK (3<<MXC_CCM_CCGR5_SSI3_OFFSET)
+#define MXC_CCM_CCGR5_SSI3_MASK (3 << MXC_CCM_CCGR5_SSI3_OFFSET)
#define MXC_CCM_CCGR5_UART_OFFSET 24
-#define MXC_CCM_CCGR5_UART_MASK (3<<MXC_CCM_CCGR5_UART_OFFSET)
+#define MXC_CCM_CCGR5_UART_MASK (3 << MXC_CCM_CCGR5_UART_OFFSET)
#define MXC_CCM_CCGR5_UART_SERIAL_OFFSET 26
-#define MXC_CCM_CCGR5_UART_SERIAL_MASK (3<<MXC_CCM_CCGR5_UART_SERIAL_OFFSET)
+#define MXC_CCM_CCGR5_UART_SERIAL_MASK (3 << MXC_CCM_CCGR5_UART_SERIAL_OFFSET)
#define MXC_CCM_CCGR6_USBOH3_OFFSET 0
-#define MXC_CCM_CCGR6_USBOH3_MASK (3<<MXC_CCM_CCGR6_USBOH3_OFFSET)
+#define MXC_CCM_CCGR6_USBOH3_MASK (3 << MXC_CCM_CCGR6_USBOH3_OFFSET)
#define MXC_CCM_CCGR6_USDHC1_OFFSET 2
-#define MXC_CCM_CCGR6_USDHC1_MASK (3<<MXC_CCM_CCGR6_USDHC1_OFFSET)
+#define MXC_CCM_CCGR6_USDHC1_MASK (3 << MXC_CCM_CCGR6_USDHC1_OFFSET)
#define MXC_CCM_CCGR6_USDHC2_OFFSET 4
-#define MXC_CCM_CCGR6_USDHC2_MASK (3<<MXC_CCM_CCGR6_USDHC2_OFFSET)
+#define MXC_CCM_CCGR6_USDHC2_MASK (3 << MXC_CCM_CCGR6_USDHC2_OFFSET)
#define MXC_CCM_CCGR6_USDHC3_OFFSET 6
-#define MXC_CCM_CCGR6_USDHC3_MASK (3<<MXC_CCM_CCGR6_USDHC3_OFFSET)
+#define MXC_CCM_CCGR6_USDHC3_MASK (3 << MXC_CCM_CCGR6_USDHC3_OFFSET)
#define MXC_CCM_CCGR6_USDHC4_OFFSET 8
-#define MXC_CCM_CCGR6_USDHC4_MASK (3<<MXC_CCM_CCGR6_USDHC4_OFFSET)
+#define MXC_CCM_CCGR6_USDHC4_MASK (3 << MXC_CCM_CCGR6_USDHC4_OFFSET)
#define MXC_CCM_CCGR6_EMI_SLOW_OFFSET 10
-#define MXC_CCM_CCGR6_EMI_SLOW_MASK (3<<MXC_CCM_CCGR6_EMI_SLOW_OFFSET)
+#define MXC_CCM_CCGR6_EMI_SLOW_MASK (3 << MXC_CCM_CCGR6_EMI_SLOW_OFFSET)
#define MXC_CCM_CCGR6_VDOAXICLK_OFFSET 12
-#define MXC_CCM_CCGR6_VDOAXICLK_MASK (3<<MXC_CCM_CCGR6_VDOAXICLK_OFFSET)
+#define MXC_CCM_CCGR6_VDOAXICLK_MASK (3 << MXC_CCM_CCGR6_VDOAXICLK_OFFSET)
#define BM_ANADIG_PLL_SYS_LOCK 0x80000000
#define BP_ANADIG_PLL_SYS_RSVD0 20
diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index d79ab2f..03abb2a 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -25,6 +25,13 @@
#define ROMCP_ARB_BASE_ADDR 0x00000000
#define ROMCP_ARB_END_ADDR 0x000FFFFF
+
+#ifdef CONFIG_MX6SL
+#define GPU_2D_ARB_BASE_ADDR 0x02200000
+#define GPU_2D_ARB_END_ADDR 0x02203FFF
+#define OPENVG_ARB_BASE_ADDR 0x02204000
+#define OPENVG_ARB_END_ADDR 0x02207FFF
+#else
#define CAAM_ARB_BASE_ADDR 0x00100000
#define CAAM_ARB_END_ADDR 0x00103FFF
#define APBH_DMA_ARB_BASE_ADDR 0x00110000
@@ -37,9 +44,19 @@
#define GPU_2D_ARB_END_ADDR 0x00137FFF
#define DTCP_ARB_BASE_ADDR 0x00138000
#define DTCP_ARB_END_ADDR 0x0013BFFF
+#endif /* CONFIG_MX6SL */
+
+#define MXS_APBH_BASE APBH_DMA_ARB_BASE_ADDR
+#define MXS_GPMI_BASE (APBH_DMA_ARB_BASE_ADDR + 0x02000)
+#define MXS_BCH_BASE (APBH_DMA_ARB_BASE_ADDR + 0x04000)
/* GPV - PL301 configuration ports */
+#ifdef CONFIG_MX6SL
+#define GPV2_BASE_ADDR 0x00D00000
+#else
#define GPV2_BASE_ADDR 0x00200000
+#endif
+
#define GPV3_BASE_ADDR 0x00300000
#define GPV4_BASE_ADDR 0x00800000
#define IRAM_BASE_ADDR 0x00900000
@@ -70,10 +87,17 @@
#define WEIM_ARB_BASE_ADDR 0x08000000
#define WEIM_ARB_END_ADDR 0x0FFFFFFF
+#ifdef CONFIG_MX6SL
+#define MMDC0_ARB_BASE_ADDR 0x80000000
+#define MMDC0_ARB_END_ADDR 0xFFFFFFFF
+#define MMDC1_ARB_BASE_ADDR 0xC0000000
+#define MMDC1_ARB_END_ADDR 0xFFFFFFFF
+#else
#define MMDC0_ARB_BASE_ADDR 0x10000000
#define MMDC0_ARB_END_ADDR 0x7FFFFFFF
#define MMDC1_ARB_BASE_ADDR 0x80000000
#define MMDC1_ARB_END_ADDR 0xFFFFFFFF
+#endif
#define IPU_SOC_BASE_ADDR IPU1_ARB_BASE_ADDR
#define IPU_SOC_OFFSET 0x00200000
@@ -89,6 +113,16 @@
#define ECSPI2_BASE_ADDR (ATZ1_BASE_ADDR + 0x0C000)
#define ECSPI3_BASE_ADDR (ATZ1_BASE_ADDR + 0x10000)
#define ECSPI4_BASE_ADDR (ATZ1_BASE_ADDR + 0x14000)
+#ifdef CONFIG_MX6SL
+#define UART5_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x18000)
+#define UART1_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x20000)
+#define UART2_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x24000)
+#define SSI1_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x28000)
+#define SSI2_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x2C000)
+#define SSI3_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x30000)
+#define UART3_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x34000)
+#define UART4_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x38000)
+#else
#define ECSPI5_BASE_ADDR (ATZ1_BASE_ADDR + 0x18000)
#define UART1_BASE (ATZ1_BASE_ADDR + 0x20000)
#define ESAI1_BASE_ADDR (ATZ1_BASE_ADDR + 0x24000)
@@ -96,6 +130,8 @@
#define SSI2_BASE_ADDR (ATZ1_BASE_ADDR + 0x2C000)
#define SSI3_BASE_ADDR (ATZ1_BASE_ADDR + 0x30000)
#define ASRC_BASE_ADDR (ATZ1_BASE_ADDR + 0x34000)
+#endif
+
#define SPBA_BASE_ADDR (ATZ1_BASE_ADDR + 0x3C000)
#define VPU_BASE_ADDR (ATZ1_BASE_ADDR + 0x40000)
#define AIPS1_ON_BASE_ADDR (ATZ1_BASE_ADDR + 0x7C000)
@@ -128,18 +164,35 @@
#define SRC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x58000)
#define GPC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x5C000)
#define IOMUXC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x60000)
+#ifdef CONFIG_MX6SL
+#define CSI_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x64000)
+#define SIPIX_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x68000)
+#define SDMA_PORT_HOST_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000)
+#else
#define DCIC1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x64000)
#define DCIC2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x68000)
#define DMA_REQ_PORT_HOST_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000)
+#endif
#define AIPS2_ON_BASE_ADDR (ATZ2_BASE_ADDR + 0x7C000)
#define AIPS2_OFF_BASE_ADDR (ATZ2_BASE_ADDR + 0x80000)
#define CAAM_BASE_ADDR (ATZ2_BASE_ADDR)
#define ARM_BASE_ADDR (ATZ2_BASE_ADDR + 0x40000)
+#ifdef CONFIG_MX6SL
+#define USBO2H_PL301_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x0000)
+#define USBO2H_USB_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4000)
+#else
#define USBOH3_PL301_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x0000)
#define USBOH3_USB_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4000)
+#endif
+
#define ENET_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x8000)
+#ifdef CONFIG_MX6SL
+#define MSHC_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0xC000)
+#else
#define MLB_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0xC000)
+#endif
+
#define USDHC1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x10000)
#define USDHC2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x14000)
#define USDHC3_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x18000)
@@ -149,7 +202,12 @@
#define I2C3_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x28000)
#define ROMCP_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x2C000)
#define MMDC_P0_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x30000)
+#ifdef CONFIG_MX6SL
+#define RNGB_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x34000)
+#else
#define MMDC_P1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x34000)
+#endif
+
#define WEIM_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x38000)
#define OCOTP_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x3C000)
#define CSU_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x40000)
@@ -171,7 +229,6 @@
#define CHIP_REV_1_0 0x10
#define IRAM_SIZE 0x00040000
-#define IMX_IIM_BASE OCOTP_BASE_ADDR
#define FEC_QUIRK_ENET_MAC
#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
@@ -200,12 +257,6 @@
u32 gpr10;
};
-/* OCOTP Registers */
-struct ocotp_regs {
- u32 reserved[0x198];
- u32 gp1; /* 0x660 */
-};
-
/* GPR3 bitfields */
#define IOMUXC_GPR3_GPU_DBG_OFFSET 29
#define IOMUXC_GPR3_GPU_DBG_MASK (3<<IOMUXC_GPR3_GPU_DBG_OFFSET)
@@ -365,14 +416,22 @@
#define MXC_CSPICON_POL 4
#define MXC_CSPICON_PHA 0
#define MXC_CSPICON_SSPOL 12
+#ifdef CONFIG_MX6SL
+#define MXC_SPI_BASE_ADDRESSES \
+ ECSPI1_BASE_ADDR, \
+ ECSPI2_BASE_ADDR, \
+ ECSPI3_BASE_ADDR, \
+ ECSPI4_BASE_ADDR
+#else
#define MXC_SPI_BASE_ADDRESSES \
ECSPI1_BASE_ADDR, \
ECSPI2_BASE_ADDR, \
ECSPI3_BASE_ADDR, \
ECSPI4_BASE_ADDR, \
ECSPI5_BASE_ADDR
+#endif
-struct iim_regs {
+struct ocotp_regs {
u32 ctrl;
u32 ctrl_set;
u32 ctrl_clr;
@@ -383,9 +442,9 @@
u32 rsvd1[3];
u32 read_ctrl;
u32 rsvd2[3];
- u32 fuse_data;
+ u32 read_fuse_data;
u32 rsvd3[3];
- u32 sticky;
+ u32 sw_sticky;
u32 rsvd4[3];
u32 scs;
u32 scs_set;
@@ -400,7 +459,16 @@
struct fuse_bank {
u32 fuse_regs[0x20];
- } bank[15];
+ } bank[16];
+};
+
+struct fuse_bank0_regs {
+ u32 lock;
+ u32 rsvd0[3];
+ u32 uid_low;
+ u32 rsvd1[3];
+ u32 uid_high;
+ u32 rsvd2[0x17];
};
struct fuse_bank4_regs {
@@ -411,7 +479,11 @@
u32 mac_addr_low;
u32 rsvd2[3];
u32 mac_addr_high;
- u32 rsvd3[0x13];
+ u32 rsvd3[0xb];
+ u32 gp1;
+ u32 rsvd4[3];
+ u32 gp2;
+ u32 rsvd5[3];
};
struct aipstz_regs {
diff --git a/arch/arm/include/asm/arch-mx6/mx6-pins.h b/arch/arm/include/asm/arch-mx6/mx6-pins.h
index 63f4856..ce865a6 100644
--- a/arch/arm/include/asm/arch-mx6/mx6-pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6-pins.h
@@ -24,7 +24,11 @@
#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
#include "mx6dl_pins.h"
#else
+#if defined(CONFIG_MX6SL)
+#include "mx6sl_pins.h"
+#else
#error "Please select cpu"
+#endif /* CONFIG_MX6SL */
#endif /* CONFIG_MX6DL or CONFIG_MX6S */
#endif /* CONFIG_MX6Q */
diff --git a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
index 9846f1b..a4134a0 100644
--- a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
@@ -22,33 +22,6 @@
#include <asm/imx-common/iomux-v3.h>
-/* Use to set PAD control */
-#define PAD_CTL_HYS (1 << 16)
-#define PAD_CTL_PUS_100K_DOWN (0 << 14)
-#define PAD_CTL_PUS_47K_UP (1 << 14)
-#define PAD_CTL_PUS_100K_UP (2 << 14)
-#define PAD_CTL_PUS_22K_UP (3 << 14)
-
-#define PAD_CTL_PUE (1 << 13)
-#define PAD_CTL_PKE (1 << 12)
-#define PAD_CTL_ODE (1 << 11)
-#define PAD_CTL_SPEED_LOW (1 << 6)
-#define PAD_CTL_SPEED_MED (2 << 6)
-#define PAD_CTL_SPEED_HIGH (3 << 6)
-#define PAD_CTL_DSE_DISABLE (0 << 3)
-#define PAD_CTL_DSE_240ohm (1 << 3)
-#define PAD_CTL_DSE_120ohm (2 << 3)
-#define PAD_CTL_DSE_80ohm (3 << 3)
-#define PAD_CTL_DSE_60ohm (4 << 3)
-#define PAD_CTL_DSE_48ohm (5 << 3)
-#define PAD_CTL_DSE_40ohm (6 << 3)
-#define PAD_CTL_DSE_34ohm (7 << 3)
-#define PAD_CTL_SRE_FAST (1 << 0)
-#define PAD_CTL_SRE_SLOW (0 << 0)
-
-#define IOMUX_CONFIG_SION 0x10
-#define NO_MUX_I 0
-#define NO_PAD_I 0
enum {
MX6_PAD_CSI0_DAT10__UART1_TXD = IOMUX_PAD(0x0360, 0x004C, 3, 0x0000, 0, 0),
MX6_PAD_CSI0_DAT11__UART1_RXD = IOMUX_PAD(0x0364, 0x0050, 3, 0x08FC, 1, 0),
@@ -93,6 +66,7 @@
MX6_PAD_EIM_D28__I2C1_SDA = IOMUX_PAD(0x0544, 0x0174, 1 | IOMUX_CONFIG_SION, 0x086C, 1, 0),
MX6_PAD_EIM_D28__GPIO_3_28 = IOMUX_PAD(0x0544, 0x0174, 5, 0x0000, 0, 0),
MX6_PAD_EIM_D29__GPIO_3_29 = IOMUX_PAD(0x0548, 0x0178, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA9__GPIO_3_9 = IOMUX_PAD(0x0590, 0x01C0, 5, 0x0000, 0, 0),
MX6_PAD_ENET_MDC__ENET_MDC = IOMUX_PAD(0x05B8, 0x01E8, 1, 0x0000, 0, 0),
MX6_PAD_ENET_MDIO__ENET_MDIO = IOMUX_PAD(0x05BC, 0x01EC, 1, 0x0810, 0, 0),
MX6_PAD_ENET_REF_CLK__ENET_TX_CLK = IOMUX_PAD(0x05C0, 0x01F0, 1, 0x0000, 0, 0),
@@ -102,6 +76,7 @@
MX6_PAD_GPIO_17__GPIO_7_12 = IOMUX_PAD(0x05E8, 0x0218, 5, 0x0000, 0, 0),
MX6_PAD_GPIO_18__GPIO_7_13 = IOMUX_PAD(0x05EC, 0x021C, 5, 0x0000, 0, 0),
MX6_PAD_GPIO_19__GPIO_4_5 = IOMUX_PAD(0x05F0, 0x0220, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_2__GPIO_1_2 = IOMUX_PAD(0x05F4, 0x0224, 5, 0x0000, 0, 0),
MX6_PAD_GPIO_5__GPIO_1_5 = IOMUX_PAD(0x0600, 0x0230, 5, 0x0000, 0, 0),
MX6_PAD_GPIO_5__I2C3_SCL = IOMUX_PAD(0x0600, 0x0230, 6 | IOMUX_CONFIG_SION, 0x0878, 2, 0),
MX6_PAD_KEY_COL3__I2C2_SCL = IOMUX_PAD(0x0638, 0x0250, 4 | IOMUX_CONFIG_SION, 0x0870, 1, 0),
@@ -134,8 +109,14 @@
MX6_PAD_RGMII_TD3__ENET_RGMII_TD3 = IOMUX_PAD(0x06B8, 0x02D0, 1, 0x0000, 0, 0),
MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL = IOMUX_PAD(0x06BC, 0x02D4, 1, 0x0000, 0, 0),
MX6_PAD_RGMII_TXC__ENET_RGMII_TXC = IOMUX_PAD(0x06C0, 0x02D8, 1, 0x0000, 0, 0),
+ MX6_PAD_SD1_CLK__USDHC1_CLK = IOMUX_PAD(0x06C4, 0x02DC, 0, 0x0928, 1, 0),
+ MX6_PAD_SD1_CMD__USDHC1_CMD = IOMUX_PAD(0x06C8, 0x02E0, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0),
MX6_PAD_SD1_CMD__GPIO_1_18 = IOMUX_PAD(0x06C8, 0x02E0, 5, 0x0000, 0, 0),
MX6_PAD_SD1_DAT3__GPIO_1_21 = IOMUX_PAD(0x06D8, 0x02F0, 5, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT0__USDHC1_DAT0 = IOMUX_PAD(0x06CC, 0x02E4, 0, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT1__USDHC1_DAT1 = IOMUX_PAD(0x06D0, 0x02E8, 0, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT2__USDHC1_DAT2 = IOMUX_PAD(0x06D4, 0x02EC, 0, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT3__USDHC1_DAT3 = IOMUX_PAD(0x06D8, 0x02F0, 0, 0x0000, 0, 0),
MX6_PAD_SD3_CLK__USDHC3_CLK = IOMUX_PAD(0x06F4, 0x030C, 0, 0x0934, 1, 0),
MX6_PAD_SD3_CMD__USDHC3_CMD = IOMUX_PAD(0x06F8, 0x0310, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0),
MX6_PAD_SD3_DAT0__USDHC3_DAT0 = IOMUX_PAD(0x06FC, 0x0314, 0, 0x0000, 0, 0),
diff --git a/arch/arm/include/asm/arch-mx6/mx6q_pins.h b/arch/arm/include/asm/arch-mx6/mx6q_pins.h
index 1c1c008..02a40d4 100644
--- a/arch/arm/include/asm/arch-mx6/mx6q_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6q_pins.h
@@ -24,33 +24,6 @@
#include <asm/imx-common/iomux-v3.h>
-/* Use to set PAD control */
-#define PAD_CTL_HYS (1 << 16)
-#define PAD_CTL_PUS_100K_DOWN (0 << 14)
-#define PAD_CTL_PUS_47K_UP (1 << 14)
-#define PAD_CTL_PUS_100K_UP (2 << 14)
-#define PAD_CTL_PUS_22K_UP (3 << 14)
-
-#define PAD_CTL_PUE (1 << 13)
-#define PAD_CTL_PKE (1 << 12)
-#define PAD_CTL_ODE (1 << 11)
-#define PAD_CTL_SPEED_LOW (1 << 6)
-#define PAD_CTL_SPEED_MED (2 << 6)
-#define PAD_CTL_SPEED_HIGH (3 << 6)
-#define PAD_CTL_DSE_DISABLE (0 << 3)
-#define PAD_CTL_DSE_240ohm (1 << 3)
-#define PAD_CTL_DSE_120ohm (2 << 3)
-#define PAD_CTL_DSE_80ohm (3 << 3)
-#define PAD_CTL_DSE_60ohm (4 << 3)
-#define PAD_CTL_DSE_48ohm (5 << 3)
-#define PAD_CTL_DSE_40ohm (6 << 3)
-#define PAD_CTL_DSE_34ohm (7 << 3)
-#define PAD_CTL_SRE_FAST (1 << 0)
-#define PAD_CTL_SRE_SLOW (0 << 0)
-
-#define NO_MUX_I 0
-#define NO_PAD_I 0
-
enum {
MX6_PAD_SD2_DAT1__USDHC2_DAT1 = IOMUX_PAD(0x0360, 0x004C, 0, 0x0000, 0, 0),
MX6_PAD_SD2_DAT1__ECSPI5_SS0 = IOMUX_PAD(0x0360, 0x004C, 1, 0x0834, 0, 0),
diff --git a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
new file mode 100644
index 0000000..3c0ede0
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_ARCH_MX6_MX6SL_PINS_H__
+#define __ASM_ARCH_MX6_MX6SL_PINS_H__
+
+#include <asm/imx-common/iomux-v3.h>
+
+enum {
+ MX6_PAD_SD2_CLK__USDHC2_CLK = IOMUX_PAD(0x055C, 0x0254, 0, 0x0000, 0, 0),
+ MX6_PAD_SD2_CMD__USDHC2_CMD = IOMUX_PAD(0x0560, 0x0258, 0, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT0__USDHC2_DAT0 = IOMUX_PAD(0x0564, 0x025C, 0, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT1__USDHC2_DAT1 = IOMUX_PAD(0x0568, 0x0260, 0, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT2__USDHC2_DAT2 = IOMUX_PAD(0x056C, 0x0264, 0, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT3__USDHC2_DAT3 = IOMUX_PAD(0x0570, 0x0268, 0, 0x0000, 0, 0),
+ MX6_PAD_UART1_RXD__UART1_RXD = IOMUX_PAD(0x05A0, 0x0298, 0, 0x07FC, 0, 0),
+ MX6_PAD_UART1_TXD__UART1_TXD = IOMUX_PAD(0x05A4, 0x029C, 0, 0x0000, 0, 0),
+};
+#endif /* __ASM_ARCH_MX6_MX6SL_PINS_H__ */
diff --git a/arch/arm/include/asm/arch-mx6/sys_proto.h b/arch/arm/include/asm/arch-mx6/sys_proto.h
index 3193297..38e4e51 100644
--- a/arch/arm/include/asm/arch-mx6/sys_proto.h
+++ b/arch/arm/include/asm/arch-mx6/sys_proto.h
@@ -24,6 +24,8 @@
#ifndef _SYS_PROTO_H_
#define _SYS_PROTO_H_
+#include <asm/imx-common/regs-common.h>
+
#define MXC_CPU_MX51 0x51
#define MXC_CPU_MX53 0x53
#define MXC_CPU_MX6SL 0x60
@@ -46,4 +48,12 @@
int fecmxc_initialize(bd_t *bis);
u32 get_ahb_clk(void);
u32 get_periph_clk(void);
+
+int mxs_reset_block(struct mxs_register_32 *reg);
+int mxs_wait_mask_set(struct mxs_register_32 *reg,
+ uint32_t mask,
+ unsigned int timeout);
+int mxs_wait_mask_clr(struct mxs_register_32 *reg,
+ uint32_t mask,
+ unsigned int timeout);
#endif
diff --git a/arch/arm/include/asm/arch-mxs/clock.h b/arch/arm/include/asm/arch-mxs/clock.h
index 3f7d3f0..9be53f0 100644
--- a/arch/arm/include/asm/arch-mxs/clock.h
+++ b/arch/arm/include/asm/arch-mxs/clock.h
@@ -59,6 +59,7 @@
void mxs_set_ioclk(enum mxs_ioclock io, uint32_t freq);
void mxs_set_sspclk(enum mxs_sspclock ssp, uint32_t freq, int xtal);
void mxs_set_ssp_busclock(unsigned int bus, uint32_t freq);
+void mxs_set_lcdclk(uint32_t freq);
/* Compatibility with the FEC Ethernet driver */
#define imx_get_fecclk() mxc_get_clock(MXC_AHB_CLK)
diff --git a/arch/arm/include/asm/arch-mxs/imx-regs.h b/arch/arm/include/asm/arch-mxs/imx-regs.h
index 8f67497..dc21e34 100644
--- a/arch/arm/include/asm/arch-mxs/imx-regs.h
+++ b/arch/arm/include/asm/arch-mxs/imx-regs.h
@@ -23,11 +23,11 @@
#ifndef __IMX_REGS_H__
#define __IMX_REGS_H__
-#include <asm/arch/regs-apbh.h>
+#include <asm/imx-common/regs-apbh.h>
#include <asm/arch/regs-base.h>
-#include <asm/arch/regs-bch.h>
+#include <asm/imx-common/regs-bch.h>
#include <asm/arch/regs-digctl.h>
-#include <asm/arch/regs-gpmi.h>
+#include <asm/imx-common/regs-gpmi.h>
#include <asm/arch/regs-i2c.h>
#include <asm/arch/regs-lcdif.h>
#include <asm/arch/regs-lradc.h>
diff --git a/arch/arm/include/asm/arch-mxs/iomux.h b/arch/arm/include/asm/arch-mxs/iomux.h
index 4288715..d919fb2 100644
--- a/arch/arm/include/asm/arch-mxs/iomux.h
+++ b/arch/arm/include/asm/arch-mxs/iomux.h
@@ -71,7 +71,11 @@
#define PAD_16MA 3
#define PAD_1V8 0
+#if defined(CONFIG_MX28)
#define PAD_3V3 1
+#else
+#define PAD_3V3 0
+#endif
#define PAD_NOPULL 0
#define PAD_PULLUP 1
diff --git a/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h b/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h
index 62810ec..c3cba33 100644
--- a/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h
+++ b/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h
@@ -26,7 +26,7 @@
#ifndef __MX23_REGS_CLKCTRL_H__
#define __MX23_REGS_CLKCTRL_H__
-#include <asm/arch/regs-common.h>
+#include <asm/imx-common/regs-common.h>
#ifndef __ASSEMBLY__
struct mxs_clkctrl_regs {
diff --git a/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h b/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h
index 23e9adc..1c2c82e 100644
--- a/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h
+++ b/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h
@@ -26,7 +26,7 @@
#ifndef __MX28_REGS_CLKCTRL_H__
#define __MX28_REGS_CLKCTRL_H__
-#include <asm/arch/regs-common.h>
+#include <asm/imx-common/regs-common.h>
#ifndef __ASSEMBLY__
struct mxs_clkctrl_regs {
diff --git a/arch/arm/include/asm/arch-mxs/regs-digctl.h b/arch/arm/include/asm/arch-mxs/regs-digctl.h
index d043325..d4a3966 100644
--- a/arch/arm/include/asm/arch-mxs/regs-digctl.h
+++ b/arch/arm/include/asm/arch-mxs/regs-digctl.h
@@ -22,7 +22,7 @@
#ifndef __MX28_REGS_DIGCTL_H__
#define __MX28_REGS_DIGCTL_H__
-#include <asm/arch/regs-common.h>
+#include <asm/imx-common/regs-common.h>
#ifndef __ASSEMBLY__
struct mxs_digctl_regs {
diff --git a/arch/arm/include/asm/arch-mxs/regs-i2c.h b/arch/arm/include/asm/arch-mxs/regs-i2c.h
index 067cfd3..d062b5b 100644
--- a/arch/arm/include/asm/arch-mxs/regs-i2c.h
+++ b/arch/arm/include/asm/arch-mxs/regs-i2c.h
@@ -23,7 +23,7 @@
#ifndef __MX28_REGS_I2C_H__
#define __MX28_REGS_I2C_H__
-#include <asm/arch/regs-common.h>
+#include <asm/imx-common/regs-common.h>
#ifndef __ASSEMBLY__
struct mxs_i2c_regs {
diff --git a/arch/arm/include/asm/arch-mxs/regs-lcdif.h b/arch/arm/include/asm/arch-mxs/regs-lcdif.h
index b90b2d4..59ce236 100644
--- a/arch/arm/include/asm/arch-mxs/regs-lcdif.h
+++ b/arch/arm/include/asm/arch-mxs/regs-lcdif.h
@@ -26,16 +26,23 @@
#ifndef __MX28_REGS_LCDIF_H__
#define __MX28_REGS_LCDIF_H__
-#include <asm/arch/regs-common.h>
+#include <asm/imx-common/regs-common.h>
#ifndef __ASSEMBLY__
struct mxs_lcdif_regs {
mxs_reg_32(hw_lcdif_ctrl) /* 0x00 */
mxs_reg_32(hw_lcdif_ctrl1) /* 0x10 */
+#if defined(CONFIG_MX28)
mxs_reg_32(hw_lcdif_ctrl2) /* 0x20 */
- mxs_reg_32(hw_lcdif_transfer_count) /* 0x30 */
- mxs_reg_32(hw_lcdif_cur_buf) /* 0x40 */
- mxs_reg_32(hw_lcdif_next_buf) /* 0x50 */
+#endif
+ mxs_reg_32(hw_lcdif_transfer_count) /* 0x20/0x30 */
+ mxs_reg_32(hw_lcdif_cur_buf) /* 0x30/0x40 */
+ mxs_reg_32(hw_lcdif_next_buf) /* 0x40/0x50 */
+
+#if defined(CONFIG_MX23)
+ uint32_t reserved1[4];
+#endif
+
mxs_reg_32(hw_lcdif_timing) /* 0x60 */
mxs_reg_32(hw_lcdif_vdctrl0) /* 0x70 */
mxs_reg_32(hw_lcdif_vdctrl1) /* 0x80 */
@@ -54,13 +61,19 @@
mxs_reg_32(hw_lcdif_csc_coeffctrl4) /* 0x150 */
mxs_reg_32(hw_lcdif_csc_offset) /* 0x160 */
mxs_reg_32(hw_lcdif_csc_limit) /* 0x170 */
- mxs_reg_32(hw_lcdif_data) /* 0x180 */
- mxs_reg_32(hw_lcdif_bm_error_stat) /* 0x190 */
+
+#if defined(CONFIG_MX23)
+ uint32_t reserved2[12];
+#endif
+ mxs_reg_32(hw_lcdif_data) /* 0x1b0/0x180 */
+ mxs_reg_32(hw_lcdif_bm_error_stat) /* 0x1c0/0x190 */
+#if defined(CONFIG_MX28)
mxs_reg_32(hw_lcdif_crc_stat) /* 0x1a0 */
- mxs_reg_32(hw_lcdif_lcdif_stat) /* 0x1b0 */
- mxs_reg_32(hw_lcdif_version) /* 0x1c0 */
- mxs_reg_32(hw_lcdif_debug0) /* 0x1d0 */
- mxs_reg_32(hw_lcdif_debug1) /* 0x1e0 */
+#endif
+ mxs_reg_32(hw_lcdif_lcdif_stat) /* 0x1d0/0x1b0 */
+ mxs_reg_32(hw_lcdif_version) /* 0x1e0/0x1c0 */
+ mxs_reg_32(hw_lcdif_debug0) /* 0x1f0/0x1d0 */
+ mxs_reg_32(hw_lcdif_debug1) /* 0x200/0x1e0 */
mxs_reg_32(hw_lcdif_debug2) /* 0x1f0 */
};
#endif
@@ -191,8 +204,13 @@
#define LCDIF_VDCTRL1_VSYNC_PERIOD_MASK 0xffffffff
#define LCDIF_VDCTRL1_VSYNC_PERIOD_OFFSET 0
+#if defined(CONFIG_MX23)
+#define LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_MASK (0xff << 24)
+#define LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_OFFSET 24
+#elif defined(CONFIG_MX28)
#define LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_MASK (0x3fff << 18)
#define LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_OFFSET 18
+#endif
#define LCDIF_VDCTRL2_HSYNC_PERIOD_MASK 0x3ffff
#define LCDIF_VDCTRL2_HSYNC_PERIOD_OFFSET 0
diff --git a/arch/arm/include/asm/arch-mxs/regs-lradc.h b/arch/arm/include/asm/arch-mxs/regs-lradc.h
index 28d8382..23fd0e3 100644
--- a/arch/arm/include/asm/arch-mxs/regs-lradc.h
+++ b/arch/arm/include/asm/arch-mxs/regs-lradc.h
@@ -26,7 +26,7 @@
#ifndef __MX28_REGS_LRADC_H__
#define __MX28_REGS_LRADC_H__
-#include <asm/arch/regs-common.h>
+#include <asm/imx-common/regs-common.h>
#ifndef __ASSEMBLY__
struct mxs_lradc_regs {
diff --git a/arch/arm/include/asm/arch-mxs/regs-ocotp.h b/arch/arm/include/asm/arch-mxs/regs-ocotp.h
index 3269892..5af3855 100644
--- a/arch/arm/include/asm/arch-mxs/regs-ocotp.h
+++ b/arch/arm/include/asm/arch-mxs/regs-ocotp.h
@@ -26,7 +26,7 @@
#ifndef __MX28_REGS_OCOTP_H__
#define __MX28_REGS_OCOTP_H__
-#include <asm/arch/regs-common.h>
+#include <asm/imx-common/regs-common.h>
#ifndef __ASSEMBLY__
struct mxs_ocotp_regs {
diff --git a/arch/arm/include/asm/arch-mxs/regs-pinctrl.h b/arch/arm/include/asm/arch-mxs/regs-pinctrl.h
index d584170..191093b 100644
--- a/arch/arm/include/asm/arch-mxs/regs-pinctrl.h
+++ b/arch/arm/include/asm/arch-mxs/regs-pinctrl.h
@@ -26,7 +26,7 @@
#ifndef __MX28_REGS_PINCTRL_H__
#define __MX28_REGS_PINCTRL_H__
-#include <asm/arch/regs-common.h>
+#include <asm/imx-common/regs-common.h>
#ifndef __ASSEMBLY__
struct mxs_pinctrl_regs {
diff --git a/arch/arm/include/asm/arch-mxs/regs-power-mx23.h b/arch/arm/include/asm/arch-mxs/regs-power-mx23.h
index 51a981a..a7430c4 100644
--- a/arch/arm/include/asm/arch-mxs/regs-power-mx23.h
+++ b/arch/arm/include/asm/arch-mxs/regs-power-mx23.h
@@ -22,7 +22,7 @@
#ifndef __MX23_REGS_POWER_H__
#define __MX23_REGS_POWER_H__
-#include <asm/arch/regs-common.h>
+#include <asm/imx-common/regs-common.h>
#ifndef __ASSEMBLY__
struct mxs_power_regs {
diff --git a/arch/arm/include/asm/arch-mxs/regs-power-mx28.h b/arch/arm/include/asm/arch-mxs/regs-power-mx28.h
index 257ee88..4a73b1c 100644
--- a/arch/arm/include/asm/arch-mxs/regs-power-mx28.h
+++ b/arch/arm/include/asm/arch-mxs/regs-power-mx28.h
@@ -22,7 +22,7 @@
#ifndef __MX28_REGS_POWER_H__
#define __MX28_REGS_POWER_H__
-#include <asm/arch/regs-common.h>
+#include <asm/imx-common/regs-common.h>
#ifndef __ASSEMBLY__
struct mxs_power_regs {
diff --git a/arch/arm/include/asm/arch-mxs/regs-rtc.h b/arch/arm/include/asm/arch-mxs/regs-rtc.h
index 6b2dd33..1926546 100644
--- a/arch/arm/include/asm/arch-mxs/regs-rtc.h
+++ b/arch/arm/include/asm/arch-mxs/regs-rtc.h
@@ -23,7 +23,7 @@
#ifndef __MX28_REGS_RTC_H__
#define __MX28_REGS_RTC_H__
-#include <asm/arch/regs-common.h>
+#include <asm/imx-common/regs-common.h>
#ifndef __ASSEMBLY__
struct mxs_rtc_regs {
diff --git a/arch/arm/include/asm/arch-mxs/regs-ssp.h b/arch/arm/include/asm/arch-mxs/regs-ssp.h
index 5920f9b..0b61fa9 100644
--- a/arch/arm/include/asm/arch-mxs/regs-ssp.h
+++ b/arch/arm/include/asm/arch-mxs/regs-ssp.h
@@ -25,7 +25,7 @@
#ifndef __MX28_REGS_SSP_H__
#define __MX28_REGS_SSP_H__
-#include <asm/arch/regs-common.h>
+#include <asm/imx-common/regs-common.h>
#ifndef __ASSEMBLY__
#if defined(CONFIG_MX23)
diff --git a/arch/arm/include/asm/arch-mxs/regs-timrot.h b/arch/arm/include/asm/arch-mxs/regs-timrot.h
index f8537f1..df343bd 100644
--- a/arch/arm/include/asm/arch-mxs/regs-timrot.h
+++ b/arch/arm/include/asm/arch-mxs/regs-timrot.h
@@ -25,7 +25,7 @@
#ifndef __MX28_REGS_TIMROT_H__
#define __MX28_REGS_TIMROT_H__
-#include <asm/arch/regs-common.h>
+#include <asm/imx-common/regs-common.h>
#ifndef __ASSEMBLY__
struct mxs_timrot_regs {
diff --git a/arch/arm/include/asm/arch-omap24xx/bits.h b/arch/arm/include/asm/arch-omap24xx/bits.h
deleted file mode 100644
index 8522335..0000000
--- a/arch/arm/include/asm/arch-omap24xx/bits.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* bits.h
- * Copyright (c) 2004 Texas Instruments
- *
- * This package is free software; you can redistribute it and/or
- * modify it under the terms of the license found in the file
- * named COPYING that should have accompanied this file.
- *
- * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-#ifndef __bits_h
-#define __bits_h 1
-
-#define BIT0 (1<<0)
-#define BIT1 (1<<1)
-#define BIT2 (1<<2)
-#define BIT3 (1<<3)
-#define BIT4 (1<<4)
-#define BIT5 (1<<5)
-#define BIT6 (1<<6)
-#define BIT7 (1<<7)
-#define BIT8 (1<<8)
-#define BIT9 (1<<9)
-#define BIT10 (1<<10)
-#define BIT11 (1<<11)
-#define BIT12 (1<<12)
-#define BIT13 (1<<13)
-#define BIT14 (1<<14)
-#define BIT15 (1<<15)
-#define BIT16 (1<<16)
-#define BIT17 (1<<17)
-#define BIT18 (1<<18)
-#define BIT19 (1<<19)
-#define BIT20 (1<<20)
-#define BIT21 (1<<21)
-#define BIT22 (1<<22)
-#define BIT23 (1<<23)
-#define BIT24 (1<<24)
-#define BIT25 (1<<25)
-#define BIT26 (1<<26)
-#define BIT27 (1<<27)
-#define BIT28 (1<<28)
-#define BIT29 (1<<29)
-#define BIT30 (1<<30)
-#define BIT31 (1<<31)
-
-#endif
diff --git a/arch/arm/include/asm/arch-omap24xx/clocks.h b/arch/arm/include/asm/arch-omap24xx/clocks.h
deleted file mode 100644
index 2e92569..0000000
--- a/arch/arm/include/asm/arch-omap24xx/clocks.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef _OMAP24XX_CLOCKS_H_
-#define _OMAP24XX_CLOCKS_H_
-
-#define COMMIT_DIVIDERS 0x1
-
-#define MODE_BYPASS_FAST 0x2
-#define APLL_LOCK 0xc
-#ifdef CONFIG_APTIX
-#define DPLL_LOCK 0x1 /* stay in bypass mode */
-#else
-#define DPLL_LOCK 0x3 /* DPLL lock */
-#endif
-
-/****************************************************************************;
-; PRCM Scheme II
-;
-; Enable clocks and DPLL for:
-; DPLL=300, DPLLout=600 M=1,N=50 CM_CLKSEL1_PLL[21:8] 12/2*50
-; Core=600 (core domain) DPLLx2 CM_CLKSEL2_PLL[1:0]
-; MPUF=300 (mpu domain) 2 CM_CLKSEL_MPU[4:0]
-; DSPF=200 (dsp domain) 3 CM_CLKSEL_DSP[4:0]
-; DSPI=100 6 CM_CLKSEL_DSP[6:5]
-; DSP_S bypass CM_CLKSEL_DSP[7]
-; IVAF=200 (dsp domain) 3 CM_CLKSEL_DSP[12:8]
-; IVAF=100 auto
-; IVAI auto
-; IVA_MPU auto
-; IVA_S bypass CM_CLKSEL_DSP[13]
-; GFXF=50 (gfx domain) 12 CM_CLKSEL_FGX[2:0]
-; SSI_SSRF=200 3 CM_CLKSEL1_CORE[24:20]
-; SSI_SSTF=100 auto
-; L3=100Mhz (sdram) 6 CM_CLKSEL1_CORE[4:0]
-; L4=100Mhz 6
-; C_L4_USB=50 12 CM_CLKSEL1_CORE[6:5]
-***************************************************************************/
-#define II_DPLL_OUT_X2 0x2 /* x2 core out */
-#define II_MPU_DIV 0x2 /* mpu = core/2 */
-#define II_DSP_DIV 0x343 /* dsp & iva divider */
-#define II_GFX_DIV 0x2
-#define II_BUS_DIV 0x04601026
-#define II_DPLL_300 0x01832100
-
-/****************************************************************************;
-; PRCM Scheme III
-;
-; Enable clocks and DPLL for:
-; DPLL=266, DPLLout=532 M=5+1,N=133 CM_CLKSEL1_PLL[21:8] 12/6*133=266
-; Core=532 (core domain) DPLLx2 CM_CLKSEL2_PLL[1:0]
-; MPUF=266 (mpu domain) /2 CM_CLKSEL_MPU[4:0]
-; DSPF=177.3 (dsp domain) /3 CM_CLKSEL_DSP[4:0]
-; DSPI=88.67 /6 CM_CLKSEL_DSP[6:5]
-; DSP_S ACTIVATED CM_CLKSEL_DSP[7]
-; IVAF=88.67 (dsp domain) /3 CM_CLKSEL_DSP[12:8]
-; IVAF=88.67 auto
-; IVAI auto
-; IVA_MPU auto
-; IVA_S ACTIVATED CM_CLKSEL_DSP[13]
-; GFXF=66.5 (gfx domain) /8 CM_CLKSEL_FGX[2:0]:
-; SSI_SSRF=177.3 /3 CM_CLKSEL1_CORE[24:20]
-; SSI_SSTF=88.67 auto
-; L3=133Mhz (sdram) /4 CM_CLKSEL1_CORE[4:0]
-; L4=66.5Mhz /8
-; C_L4_USB=33.25 /16 CM_CLKSEL1_CORE[6:5]
-***************************************************************************/
-#define III_DPLL_OUT_X2 0x2 /* x2 core out */
-#define III_MPU_DIV 0x2 /* mpu = core/2 */
-#define III_DSP_DIV 0x23C3 /* dsp & iva divider sych enabled*/
-#define III_GFX_DIV 0x2
-#define III_BUS_DIV 0x08301044
-#define III_DPLL_266 0x01885500
-
-/* set defaults for boot up */
-#ifdef PRCM_CONFIG_II
-# define DPLL_OUT II_DPLL_OUT_X2
-# define MPU_DIV II_MPU_DIV
-# define DSP_DIV II_DSP_DIV
-# define GFX_DIV II_GFX_DIV
-# define BUS_DIV II_BUS_DIV
-# define DPLL_VAL II_DPLL_300
-#elif PRCM_CONFIG_III
-# define DPLL_OUT III_DPLL_OUT_X2
-# define MPU_DIV III_MPU_DIV
-# define DSP_DIV III_DSP_DIV
-# define GFX_DIV III_GFX_DIV
-# define BUS_DIV III_BUS_DIV
-# define DPLL_VAL III_DPLL_266
-#endif
-
-/* lock delay time out */
-#define LDELAY 12000000
-
-#endif
diff --git a/arch/arm/include/asm/arch-omap24xx/i2c.h b/arch/arm/include/asm/arch-omap24xx/i2c.h
deleted file mode 100644
index 6f64519..0000000
--- a/arch/arm/include/asm/arch-omap24xx/i2c.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef _OMAP24XX_I2C_H_
-#define _OMAP24XX_I2C_H_
-
-#define I2C_BASE1 0x48070000
-#define I2C_BASE2 0x48072000 /* nothing hooked up on h4 */
-
-#define I2C_DEFAULT_BASE I2C_BASE1
-
-struct i2c {
- unsigned short rev; /* 0x00 */
- unsigned short res1;
- unsigned short ie; /* 0x04 */
- unsigned short res2;
- unsigned short stat; /* 0x08 */
- unsigned short res3;
- unsigned short iv; /* 0x0C */
- unsigned short res4;
- unsigned short syss; /* 0x10 */
- unsigned short res4p1;
- unsigned short buf; /* 0x14 */
- unsigned short res5;
- unsigned short cnt; /* 0x18 */
- unsigned short res6;
- unsigned short data; /* 0x1C */
- unsigned short res7;
- unsigned short sysc; /* 0x20 */
- unsigned short res8;
- unsigned short con; /* 0x24 */
- unsigned short res9;
- unsigned short oa; /* 0x28 */
- unsigned short res10;
- unsigned short sa; /* 0x2C */
- unsigned short res11;
- unsigned short psc; /* 0x30 */
- unsigned short res12;
- unsigned short scll; /* 0x34 */
- unsigned short res13;
- unsigned short sclh; /* 0x38 */
- unsigned short res14;
- unsigned short systest; /* 0x3c */
- unsigned short res15;
-};
-
-#define I2C_BUS_MAX 2
-
-#endif
diff --git a/arch/arm/include/asm/arch-omap24xx/mem.h b/arch/arm/include/asm/arch-omap24xx/mem.h
deleted file mode 100644
index 42e8ab2..0000000
--- a/arch/arm/include/asm/arch-omap24xx/mem.h
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _OMAP24XX_MEM_H_
-#define _OMAP24XX_MEM_H_
-
-#define SDRC_CS0_OSET 0x0
-#define SDRC_CS1_OSET 0x30 /* mirror CS1 regs appear offset 0x30 from CS0 */
-
-#ifndef __ASSEMBLY__
-/* struct's for holding data tables for current boards, they are getting used
- early in init when NO global access are there */
-struct sdrc_data_s {
- u32 sdrc_sharing;
- u32 sdrc_mdcfg_0_ddr;
- u32 sdrc_mdcfg_0_sdr;
- u32 sdrc_actim_ctrla_0;
- u32 sdrc_actim_ctrlb_0;
- u32 sdrc_rfr_ctrl;
- u32 sdrc_mr_0_ddr;
- u32 sdrc_mr_0_sdr;
- u32 sdrc_dllab_ctrl;
-} /*__attribute__ ((packed))*/;
-typedef struct sdrc_data_s sdrc_data_t;
-
-typedef enum {
- STACKED = 0,
- IP_DDR = 1,
- COMBO_DDR = 2,
- IP_SDR = 3,
-} mem_t;
-
-#endif
-
-/* Slower full frequency range default timings for x32 operation*/
-#define H4_2420_SDRC_SHARING 0x00000100
-#define H4_2420_SDRC_MDCFG_0_SDR 0x00D04010 /* discrete sdr module */
-#define H4_2420_SDRC_MR_0_SDR 0x00000031
-#define H4_2420_SDRC_MDCFG_0_DDR 0x01702011 /* descrite ddr module */
-#define H4_2420_COMBO_MDCFG_0_DDR 0x00801011 /* combo module */
-#define H4_2420_SDRC_MR_0_DDR 0x00000032
-
-#define H4_2422_SDRC_SHARING 0x00004b00
-#define H4_2422_SDRC_MDCFG_0_DDR 0x00801011 /* stacked ddr on 2422 */
-#define H4_2422_SDRC_MR_0_DDR 0x00000032
-
-/* ES1 work around timings */
-#define H4_242x_SDRC_ACTIM_CTRLA_0_ES1 0x9bead909 /* 165Mhz for use with 100/133 */
-#define H4_242x_SDRC_ACTIM_CTRLB_0_ES1 0x00000020
-#define H4_242x_SDRC_RFR_CTRL_ES1 0x00002401 /* use over refresh for ES1 */
-
-/* optimized timings good for current shipping parts */
-#define H4_242X_SDRC_ACTIM_CTRLA_0_100MHz 0x5A59B485
-#define H4_242X_SDRC_ACTIM_CTRLB_0_100MHz 0x0000000e
-#define H4_242X_SDRC_ACTIM_CTRLA_0_133MHz 0x8BA6E6C8 /* temp warn 0 settings */
-#define H4_242X_SDRC_ACTIM_CTRLB_0_133MHz 0x00000010 /* temp warn 0 settings */
-#define H4_242X_SDRC_RFR_CTRL_100MHz 0x0002da01
-#define H4_242X_SDRC_RFR_CTRL_133MHz 0x0003de01
-#define H4_242x_SDRC_DLLAB_CTRL_100MHz 0x0000980E /* 72deg, allow DPLLout*1 to work (combo)*/
-#define H4_242x_SDRC_DLLAB_CTRL_133MHz 0x0000690E /* 72deg, for ES2 */
-
-#ifdef PRCM_CONFIG_II
-# define H4_2420_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_100MHz
-# define H4_2420_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_100MHz
-# define H4_2420_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_100MHz
-# define H4_2420_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_100MHz
-# define H4_2422_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_100MHz
-# define H4_2422_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_100MHz
-# define H4_2422_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_100MHz
-# define H4_2422_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_100MHz
-#elif PRCM_CONFIG_III
-# define H4_2420_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_133MHz
-# define H4_2420_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_133MHz
-# define H4_2420_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_133MHz
-# define H4_2420_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_133MHz
-# define H4_2422_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_100MHz
-# define H4_2422_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_100MHz
-# define H4_2422_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_100MHz
-# define H4_2422_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_100MHz
-#endif
-
-
-/* GPMC settings */
-#ifdef PRCM_CONFIG_II /* L3 at 100MHz */
-# ifdef CONFIG_SYS_NAND_BOOT
-# define H4_24XX_GPMC_CONFIG1_0 0x0
-# define H4_24XX_GPMC_CONFIG2_0 0x00141400
-# define H4_24XX_GPMC_CONFIG3_0 0x00141400
-# define H4_24XX_GPMC_CONFIG4_0 0x0F010F01
-# define H4_24XX_GPMC_CONFIG5_0 0x010C1414
-# define H4_24XX_GPMC_CONFIG6_0 0x00000A80
-# else /* else NOR */
-# define H4_24XX_GPMC_CONFIG1_0 0x3
-# define H4_24XX_GPMC_CONFIG2_0 0x000f0f01
-# define H4_24XX_GPMC_CONFIG3_0 0x00050502
-# define H4_24XX_GPMC_CONFIG4_0 0x0C060C06
-# define H4_24XX_GPMC_CONFIG5_0 0x01131F1F
-# endif /* endif CONFIG_SYS_NAND_BOOT */
-# define H4_24XX_GPMC_CONFIG7_0 (0x00000C40|(H4_CS0_BASE >> 24))
-# define H4_24XX_GPMC_CONFIG1_1 0x00011000
-# define H4_24XX_GPMC_CONFIG2_1 0x001F1F00
-# define H4_24XX_GPMC_CONFIG3_1 0x00080802
-# define H4_24XX_GPMC_CONFIG4_1 0x1C091C09
-# define H4_24XX_GPMC_CONFIG5_1 0x031A1F1F
-# define H4_24XX_GPMC_CONFIG6_1 0x000003C2
-# define H4_24XX_GPMC_CONFIG7_1 (0x00000F40|(H4_CS1_BASE >> 24))
-#endif /* endif PRCM_CONFIG_II */
-
-#ifdef PRCM_CONFIG_III /* L3 at 133MHz */
-# ifdef CONFIG_SYS_NAND_BOOT
-# define H4_24XX_GPMC_CONFIG1_0 0x0
-# define H4_24XX_GPMC_CONFIG2_0 0x00141400
-# define H4_24XX_GPMC_CONFIG3_0 0x00141400
-# define H4_24XX_GPMC_CONFIG4_0 0x0F010F01
-# define H4_24XX_GPMC_CONFIG5_0 0x010C1414
-# define H4_24XX_GPMC_CONFIG6_0 0x00000A80
-# else /* NOR boot */
-# define H4_24XX_GPMC_CONFIG1_0 0x3
-# define H4_24XX_GPMC_CONFIG2_0 0x00151501
-# define H4_24XX_GPMC_CONFIG3_0 0x00060602
-# define H4_24XX_GPMC_CONFIG4_0 0x10081008
-# define H4_24XX_GPMC_CONFIG5_0 0x01131F1F
-# define H4_24XX_GPMC_CONFIG6_0 0x000004c4
-# endif /* endif CONFIG_SYS_NAND_BOOT */
-# define H4_24XX_GPMC_CONFIG7_0 (0x00000C40|(H4_CS0_BASE >> 24))
-# define H4_24XX_GPMC_CONFIG1_1 0x00011000
-# define H4_24XX_GPMC_CONFIG2_1 0x001f1f01
-# define H4_24XX_GPMC_CONFIG3_1 0x00080803
-# define H4_24XX_GPMC_CONFIG4_1 0x1C091C09
-# define H4_24XX_GPMC_CONFIG5_1 0x041f1F1F
-# define H4_24XX_GPMC_CONFIG6_1 0x000004C4
-# define H4_24XX_GPMC_CONFIG7_1 (0x00000F40|(H4_CS1_BASE >> 24))
-#endif /* endif CONFIG_SYS_PRCM_III */
-
-#endif /* endif _OMAP24XX_MEM_H_ */
diff --git a/arch/arm/include/asm/arch-omap24xx/mux.h b/arch/arm/include/asm/arch-omap24xx/mux.h
deleted file mode 100644
index 4fdb9c6..0000000
--- a/arch/arm/include/asm/arch-omap24xx/mux.h
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef _OMAP2420_MUX_H_
-#define _OMAP2420_MUX_H_
-
-#ifndef __ASSEMBLY__
-typedef unsigned char uint8;
-typedef unsigned int uint32;
-
-void muxSetupSDRC(void);
-void muxSetupGPMC(void);
-void muxSetupUsb0(void);
-void muxSetupUsbHost(void);
-void muxSetupUart3(void);
-void muxSetupI2C1(void);
-void muxSetupUART1(void);
-void muxSetupLCD(void);
-void muxSetupCamera(void);
-void muxSetupMMCSD(void) ;
-void muxSetupTouchScreen(void) ;
-void muxSetupHDQ(void);
-#endif
-
-#define USB_OTG_CTRL ((volatile uint32 *)0x4805E30C)
-
-/* Pin Muxing registers used for HDQ (Smart battery) */
-#define CONTROL_PADCONF_HDQ_SIO ((volatile unsigned char *)0x48000115)
-
-/* Pin Muxing registers used for GPMC */
-#define CONTROL_PADCONF_GPMC_D2_BYTE0 ((volatile unsigned char *)0x48000088)
-#define CONTROL_PADCONF_GPMC_D2_BYTE1 ((volatile unsigned char *)0x48000089)
-#define CONTROL_PADCONF_GPMC_D2_BYTE2 ((volatile unsigned char *)0x4800008A)
-#define CONTROL_PADCONF_GPMC_D2_BYTE3 ((volatile unsigned char *)0x4800008B)
-
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE0 ((volatile unsigned char *)0x4800008C)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE1 ((volatile unsigned char *)0x4800008D)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE2 ((volatile unsigned char *)0x4800008E)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE3 ((volatile unsigned char *)0x4800008F)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE4 (0x48000090)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE5 (0x48000091)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE6 (0x48000092)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE7 (0x48000093)
-
-/* Pin Muxing registers used for SDRC */
-#define CONTROL_PADCONF_SDRC_NCS0_BYTE0 ((volatile unsigned char *)0x480000A0)
-#define CONTROL_PADCONF_SDRC_NCS0_BYTE1 ((volatile unsigned char *)0x480000A1)
-#define CONTROL_PADCONF_SDRC_NCS0_BYTE2 ((volatile unsigned char *)0x480000A2)
-#define CONTROL_PADCONF_SDRC_NCS0_BYTE3 ((volatile unsigned char *)0x480000A3)
-
-#define CONTROL_PADCONF_SDRC_A14_BYTE0 ((volatile unsigned char *)0x48000030)
-#define CONTROL_PADCONF_SDRC_A14_BYTE1 ((volatile unsigned char *)0x48000031)
-#define CONTROL_PADCONF_SDRC_A14_BYTE2 ((volatile unsigned char *)0x48000032)
-#define CONTROL_PADCONF_SDRC_A14_BYTE3 ((volatile unsigned char *)0x48000033)
-
-/* Pin Muxing registers used for Touch Screen (SPI) */
-#define CONTROL_PADCONF_SPI1_CLK ((volatile unsigned char *)0x480000FF)
-#define CONTROL_PADCONF_SPI1_SIMO ((volatile unsigned char *)0x48000100)
-#define CONTROL_PADCONF_SPI1_SOMI ((volatile unsigned char *)0x48000101)
-#define CONTROL_PADCONF_SPI1_NCS0 ((volatile unsigned char *)0x48000102)
-#define CONTROL_PADCONF_SPI1_NCS1 (0x48000103)
-
-#define CONTROL_PADCONF_MCBSP1_FSR ((volatile unsigned char *)0x4800010B)
-
-/* Pin Muxing registers used for MMCSD */
-#define CONTROL_PADCONF_MMC_CLKI ((volatile unsigned char *)0x480000FE)
-#define CONTROL_PADCONF_MMC_CLKO ((volatile unsigned char *)0x480000F3)
-#define CONTROL_PADCONF_MMC_CMD ((volatile unsigned char *)0x480000F4)
-#define CONTROL_PADCONF_MMC_DAT0 ((volatile unsigned char *)0x480000F5)
-#define CONTROL_PADCONF_MMC_DAT1 ((volatile unsigned char *)0x480000F6)
-#define CONTROL_PADCONF_MMC_DAT2 ((volatile unsigned char *)0x480000F7)
-#define CONTROL_PADCONF_MMC_DAT3 ((volatile unsigned char *)0x480000F8)
-#define CONTROL_PADCONF_MMC_DAT_DIR0 ((volatile unsigned char *)0x480000F9)
-#define CONTROL_PADCONF_MMC_DAT_DIR1 ((volatile unsigned char *)0x480000FA)
-#define CONTROL_PADCONF_MMC_DAT_DIR2 ((volatile unsigned char *)0x480000FB)
-#define CONTROL_PADCONF_MMC_DAT_DIR3 ((volatile unsigned char *)0x480000FC)
-#define CONTROL_PADCONF_MMC_CMD_DIR ((volatile unsigned char *)0x480000FD)
-
-#define CONTROL_PADCONF_SDRC_A14 ((volatile unsigned char *)0x48000030)
-#define CONTROL_PADCONF_SDRC_A13 ((volatile unsigned char *)0x48000031)
-
-/* Pin Muxing registers used for CAMERA */
-#define CONTROL_PADCONF_SYS_NRESWARM ((volatile unsigned char *)0x4800012B)
-
-#define CONTROL_PADCONF_CAM_XCLK ((volatile unsigned char *)0x480000DC)
-#define CONTROL_PADCONF_CAM_LCLK ((volatile unsigned char *)0x480000DB)
-#define CONTROL_PADCONF_CAM_VS ((volatile unsigned char *)0x480000DA)
-#define CONTROL_PADCONF_CAM_HS ((volatile unsigned char *)0x480000D9)
-#define CONTROL_PADCONF_CAM_D0 ((volatile unsigned char *)0x480000D8)
-#define CONTROL_PADCONF_CAM_D1 ((volatile unsigned char *)0x480000D7)
-#define CONTROL_PADCONF_CAM_D2 ((volatile unsigned char *)0x480000D6)
-#define CONTROL_PADCONF_CAM_D3 ((volatile unsigned char *)0x480000D5)
-#define CONTROL_PADCONF_CAM_D4 ((volatile unsigned char *)0x480000D4)
-#define CONTROL_PADCONF_CAM_D5 ((volatile unsigned char *)0x480000D3)
-#define CONTROL_PADCONF_CAM_D6 ((volatile unsigned char *)0x480000D2)
-#define CONTROL_PADCONF_CAM_D7 ((volatile unsigned char *)0x480000D1)
-#define CONTROL_PADCONF_CAM_D8 ((volatile unsigned char *)0x480000D0)
-#define CONTROL_PADCONF_CAM_D9 ((volatile unsigned char *)0x480000CF)
-
-/* Pin Muxing registers used for LCD */
-#define CONTROL_PADCONF_DSS_D0 ((volatile unsigned char *)0x480000B3)
-#define CONTROL_PADCONF_DSS_D1 ((volatile unsigned char *)0x480000B4)
-#define CONTROL_PADCONF_DSS_D2 ((volatile unsigned char *)0x480000B5)
-#define CONTROL_PADCONF_DSS_D3 ((volatile unsigned char *)0x480000B6)
-#define CONTROL_PADCONF_DSS_D4 ((volatile unsigned char *)0x480000B7)
-#define CONTROL_PADCONF_DSS_D5 ((volatile unsigned char *)0x480000B8)
-#define CONTROL_PADCONF_DSS_D6 ((volatile unsigned char *)0x480000B9)
-#define CONTROL_PADCONF_DSS_D7 ((volatile unsigned char *)0x480000BA)
-#define CONTROL_PADCONF_DSS_D8 ((volatile unsigned char *)0x480000BB)
-#define CONTROL_PADCONF_DSS_D9 ((volatile unsigned char *)0x480000BC)
-#define CONTROL_PADCONF_DSS_D10 ((volatile unsigned char *)0x480000BD)
-#define CONTROL_PADCONF_DSS_D11 ((volatile unsigned char *)0x480000BE)
-#define CONTROL_PADCONF_DSS_D12 ((volatile unsigned char *)0x480000BF)
-#define CONTROL_PADCONF_DSS_D13 ((volatile unsigned char *)0x480000C0)
-#define CONTROL_PADCONF_DSS_D14 ((volatile unsigned char *)0x480000C1)
-#define CONTROL_PADCONF_DSS_D15 ((volatile unsigned char *)0x480000C2)
-#define CONTROL_PADCONF_DSS_D16 ((volatile unsigned char *)0x480000C3)
-#define CONTROL_PADCONF_DSS_D17 ((volatile unsigned char *)0x480000C4)
-#define CONTROL_PADCONF_DSS_PCLK ((volatile unsigned char *)0x480000CB)
-#define CONTROL_PADCONF_DSS_VSYNC ((volatile unsigned char *)0x480000CC)
-#define CONTROL_PADCONF_DSS_HSYNC ((volatile unsigned char *)0x480000CD)
-#define CONTROL_PADCONF_DSS_ACBIAS ((volatile unsigned char *)0x480000CE)
-
-/* Pin Muxing registers used for UART1 */
-#define CONTROL_PADCONF_UART1_CTS ((volatile unsigned char *)0x480000C5)
-#define CONTROL_PADCONF_UART1_RTS ((volatile unsigned char *)0x480000C6)
-#define CONTROL_PADCONF_UART1_TX ((volatile unsigned char *)0x480000C7)
-#define CONTROL_PADCONF_UART1_RX ((volatile unsigned char *)0x480000C8)
-
-/* Pin Muxing registers used for I2C1 */
-#define CONTROL_PADCONF_I2C1_SCL ((volatile unsigned char *)0x48000111)
-#define CONTROL_PADCONF_I2C1_SDA ((volatile unsigned char *)0x48000112)
-
-/* Pin Muxing registres used for USB0. */
-#define CONTROL_PADCONF_USB0_PUEN ((volatile uint8 *)0x4800011D)
-#define CONTROL_PADCONF_USB0_VP ((volatile uint8 *)0x4800011E)
-#define CONTROL_PADCONF_USB0_VM ((volatile uint8 *)0x4800011F)
-#define CONTROL_PADCONF_USB0_RCV ((volatile uint8 *)0x48000120)
-#define CONTROL_PADCONF_USB0_TXEN ((volatile uint8 *)0x48000121)
-#define CONTROL_PADCONF_USB0_SE0 ((volatile uint8 *)0x48000122)
-#define CONTROL_PADCONF_USB0_DAT ((volatile uint8 *)0x48000123)
-
-/* Pin Muxing registres used for USB1. */
-#define CONTROL_PADCONF_USB1_RCV (0x480000EB)
-#define CONTROL_PADCONF_USB1_TXEN (0x480000EC)
-
-/* Pin Muxing registers used for UART3/IRDA */
-#define CONTROL_PADCONF_UART3_TX_IRTX ((volatile uint8 *)0x48000118)
-#define CONTROL_PADCONF_UART3_RX_IRRX ((volatile uint8 *)0x48000119)
-
-/* Pin Muxing registers used for GPIO */
-#define CONTROL_PADCONF_GPIO69 (0x480000ED)
-#define CONTROL_PADCONF_GPIO70 (0x480000EE)
-#define CONTROL_PADCONF_GPIO102 (0x48000116)
-#define CONTROL_PADCONF_GPIO103 (0x48000117)
-#define CONTROL_PADCONF_GPIO104 (0x48000118)
-#define CONTROL_PADCONF_GPIO105 (0x48000119)
-
-#endif
diff --git a/arch/arm/include/asm/arch-omap24xx/omap2420.h b/arch/arm/include/asm/arch-omap24xx/omap2420.h
deleted file mode 100644
index 5724f5d..0000000
--- a/arch/arm/include/asm/arch-omap24xx/omap2420.h
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _OMAP2420_SYS_H_
-#define _OMAP2420_SYS_H_
-
-#include <asm/sizes.h>
-
-/*
- * 2420 specific Section
- */
-
-/* L3 Firewall */
-#define A_REQINFOPERM0 0x68005048
-#define A_READPERM0 0x68005050
-#define A_WRITEPERM0 0x68005058
-/* #define GP_DEVICE (BIT8|BIT9) FIXME -- commented out to make compile -- FIXME */
-
-/* L3 Firewall */
-#define A_REQINFOPERM0 0x68005048
-#define A_READPERM0 0x68005050
-#define A_WRITEPERM0 0x68005058
-
-/* CONTROL */
-#define OMAP2420_CTRL_BASE (0x48000000)
-#define CONTROL_STATUS (OMAP2420_CTRL_BASE + 0x2F8)
-
-/* device type */
-#define TST_DEVICE 0x0
-#define EMU_DEVICE 0x1
-#define HS_DEVICE 0x2
-#define GP_DEVICE 0x3
-
-/* TAP information */
-#define OMAP2420_TAP_BASE (0x48014000)
-#define TAP_IDCODE_REG (OMAP2420_TAP_BASE+0x204)
-#define PRODUCTION_ID (OMAP2420_TAP_BASE+0x208)
-
-/* GPMC */
-#define OMAP2420_GPMC_BASE (0x6800A000)
-#define GPMC_SYSCONFIG (OMAP2420_GPMC_BASE+0x10)
-#define GPMC_IRQENABLE (OMAP2420_GPMC_BASE+0x1C)
-#define GPMC_TIMEOUT_CONTROL (OMAP2420_GPMC_BASE+0x40)
-#define GPMC_CONFIG (OMAP2420_GPMC_BASE+0x50)
-#define GPMC_CONFIG1_0 (OMAP2420_GPMC_BASE+0x60)
-#define GPMC_CONFIG2_0 (OMAP2420_GPMC_BASE+0x64)
-#define GPMC_CONFIG3_0 (OMAP2420_GPMC_BASE+0x68)
-#define GPMC_CONFIG4_0 (OMAP2420_GPMC_BASE+0x6C)
-#define GPMC_CONFIG5_0 (OMAP2420_GPMC_BASE+0x70)
-#define GPMC_CONFIG6_0 (OMAP2420_GPMC_BASE+0x74)
-#define GPMC_CONFIG7_0 (OMAP2420_GPMC_BASE+0x78)
-#define GPMC_CONFIG1_1 (OMAP2420_GPMC_BASE+0x90)
-#define GPMC_CONFIG2_1 (OMAP2420_GPMC_BASE+0x94)
-#define GPMC_CONFIG3_1 (OMAP2420_GPMC_BASE+0x98)
-#define GPMC_CONFIG4_1 (OMAP2420_GPMC_BASE+0x9C)
-#define GPMC_CONFIG5_1 (OMAP2420_GPMC_BASE+0xA0)
-#define GPMC_CONFIG6_1 (OMAP2420_GPMC_BASE+0xA4)
-#define GPMC_CONFIG7_1 (OMAP2420_GPMC_BASE+0xA8)
-#define GPMC_CONFIG1_2 (OMAP2420_GPMC_BASE+0xC0)
-#define GPMC_CONFIG2_2 (OMAP2420_GPMC_BASE+0xC4)
-#define GPMC_CONFIG3_2 (OMAP2420_GPMC_BASE+0xC8)
-#define GPMC_CONFIG4_2 (OMAP2420_GPMC_BASE+0xCC)
-#define GPMC_CONFIG5_2 (OMAP2420_GPMC_BASE+0xD0)
-#define GPMC_CONFIG6_2 (OMAP2420_GPMC_BASE+0xD4)
-#define GPMC_CONFIG7_2 (OMAP2420_GPMC_BASE+0xD8)
-#define GPMC_CONFIG1_3 (OMAP2420_GPMC_BASE+0xF0)
-#define GPMC_CONFIG2_3 (OMAP2420_GPMC_BASE+0xF4)
-#define GPMC_CONFIG3_3 (OMAP2420_GPMC_BASE+0xF8)
-#define GPMC_CONFIG4_3 (OMAP2420_GPMC_BASE+0xFC)
-#define GPMC_CONFIG5_3 (OMAP2420_GPMC_BASE+0x100)
-#define GPMC_CONFIG6_3 (OMAP2420_GPMC_BASE+0x104)
-#define GPMC_CONFIG7_3 (OMAP2420_GPMC_BASE+0x108)
-
-/* SMS */
-#define OMAP2420_SMS_BASE 0x68008000
-#define SMS_SYSCONFIG (OMAP2420_SMS_BASE+0x10)
-#define SMS_CLASS_ARB0 (OMAP2420_SMS_BASE+0xD0)
-# define BURSTCOMPLETE_GROUP7 BIT31
-
-/* SDRC */
-#define OMAP2420_SDRC_BASE 0x68009000
-#define SDRC_SYSCONFIG (OMAP2420_SDRC_BASE+0x10)
-#define SDRC_STATUS (OMAP2420_SDRC_BASE+0x14)
-#define SDRC_CS_CFG (OMAP2420_SDRC_BASE+0x40)
-#define SDRC_SHARING (OMAP2420_SDRC_BASE+0x44)
-#define SDRC_DLLA_CTRL (OMAP2420_SDRC_BASE+0x60)
-#define SDRC_DLLB_CTRL (OMAP2420_SDRC_BASE+0x68)
-#define SDRC_POWER (OMAP2420_SDRC_BASE+0x70)
-#define SDRC_MCFG_0 (OMAP2420_SDRC_BASE+0x80)
-#define SDRC_MR_0 (OMAP2420_SDRC_BASE+0x84)
-#define SDRC_ACTIM_CTRLA_0 (OMAP2420_SDRC_BASE+0x9C)
-#define SDRC_ACTIM_CTRLB_0 (OMAP2420_SDRC_BASE+0xA0)
-#define SDRC_ACTIM_CTRLA_1 (OMAP2420_SDRC_BASE+0xC4)
-#define SDRC_ACTIM_CTRLB_1 (OMAP2420_SDRC_BASE+0xC8)
-#define SDRC_RFR_CTRL (OMAP2420_SDRC_BASE+0xA4)
-#define SDRC_MANUAL_0 (OMAP2420_SDRC_BASE+0xA8)
-#define OMAP2420_SDRC_CS0 0x80000000
-#define OMAP2420_SDRC_CS1 0xA0000000
-#define CMD_NOP 0x0
-#define CMD_PRECHARGE 0x1
-#define CMD_AUTOREFRESH 0x2
-#define CMD_ENTR_PWRDOWN 0x3
-#define CMD_EXIT_PWRDOWN 0x4
-#define CMD_ENTR_SRFRSH 0x5
-#define CMD_CKE_HIGH 0x6
-#define CMD_CKE_LOW 0x7
-#define SOFTRESET BIT1
-#define SMART_IDLE (0x2 << 3)
-#define REF_ON_IDLE (0x1 << 6)
-
-
-/* UART */
-#define OMAP2420_UART1 0x4806A000
-#define OMAP2420_UART2 0x4806C000
-#define OMAP2420_UART3 0x4806E000
-
-/* General Purpose Timers */
-#define OMAP2420_GPT1 0x48028000
-#define OMAP2420_GPT2 0x4802A000
-#define OMAP2420_GPT3 0x48078000
-#define OMAP2420_GPT4 0x4807A000
-#define OMAP2420_GPT5 0x4807C000
-#define OMAP2420_GPT6 0x4807E000
-#define OMAP2420_GPT7 0x48080000
-#define OMAP2420_GPT8 0x48082000
-#define OMAP2420_GPT9 0x48084000
-#define OMAP2420_GPT10 0x48086000
-#define OMAP2420_GPT11 0x48088000
-#define OMAP2420_GPT12 0x4808A000
-
-/* timer regs offsets (32 bit regs) */
-#define TIDR 0x0 /* r */
-#define TIOCP_CFG 0x10 /* rw */
-#define TISTAT 0x14 /* r */
-#define TISR 0x18 /* rw */
-#define TIER 0x1C /* rw */
-#define TWER 0x20 /* rw */
-#define TCLR 0x24 /* rw */
-#define TCRR 0x28 /* rw */
-#define TLDR 0x2C /* rw */
-#define TTGR 0x30 /* rw */
-#define TWPS 0x34 /* r */
-#define TMAR 0x38 /* rw */
-#define TCAR1 0x3c /* r */
-#define TSICR 0x40 /* rw */
-#define TCAR2 0x44 /* r */
-
-/* WatchDog Timers (1 secure, 3 GP) */
-#define WD1_BASE 0x48020000
-#define WD2_BASE 0x48022000
-#define WD3_BASE 0x48024000
-#define WD4_BASE 0x48026000
-#define WWPS 0x34 /* r */
-#define WSPR 0x48 /* rw */
-#define WD_UNLOCK1 0xAAAA
-#define WD_UNLOCK2 0x5555
-
-/* PRCM */
-#define OMAP2420_CM_BASE 0x48008000
-#define PRCM_CLKCFG_CTRL (OMAP2420_CM_BASE+0x080)
-#define CM_CLKSEL_MPU (OMAP2420_CM_BASE+0x140)
-#define CM_FCLKEN1_CORE (OMAP2420_CM_BASE+0x200)
-#define CM_FCLKEN2_CORE (OMAP2420_CM_BASE+0x204)
-#define CM_ICLKEN1_CORE (OMAP2420_CM_BASE+0x210)
-#define CM_ICLKEN2_CORE (OMAP2420_CM_BASE+0x214)
-#define CM_CLKSEL1_CORE (OMAP2420_CM_BASE+0x240)
-#define CM_CLKSEL_WKUP (OMAP2420_CM_BASE+0x440)
-#define CM_CLKSEL2_CORE (OMAP2420_CM_BASE+0x244)
-#define CM_CLKSEL_GFX (OMAP2420_CM_BASE+0x340)
-#define PM_RSTCTRL_WKUP (OMAP2420_CM_BASE+0x450)
-#define CM_CLKEN_PLL (OMAP2420_CM_BASE+0x500)
-#define CM_IDLEST_CKGEN (OMAP2420_CM_BASE+0x520)
-#define CM_CLKSEL1_PLL (OMAP2420_CM_BASE+0x540)
-#define CM_CLKSEL2_PLL (OMAP2420_CM_BASE+0x544)
-#define CM_CLKSEL_DSP (OMAP2420_CM_BASE+0x840)
-
-/*
- * H4 specific Section
- */
-
-/*
- * The 2420's chip selects are programmable. The mask ROM
- * does configure CS0 to 0x08000000 before dispatch. So, if
- * you want your code to live below that address, you have to
- * be prepared to jump though hoops, to reset the base address.
- */
-#if defined(CONFIG_OMAP2420H4)
-/* GPMC */
-#ifdef CONFIG_VIRTIO_A /* Pre version B */
-# define H4_CS0_BASE 0x08000000 /* flash (64 Meg aligned) */
-# define H4_CS1_BASE 0x04000000 /* debug board */
-# define H4_CS2_BASE 0x0A000000 /* wifi board */
-#else
-# define H4_CS0_BASE 0x08000000 /* flash (64 Meg aligned) */
-# define H4_CS1_BASE 0x04000000 /* debug board */
-# define H4_CS2_BASE 0x0C000000 /* wifi board */
-#endif
-
-/* base address for indirect vectors (internal boot mode) */
-#define SRAM_OFFSET0 0x40000000
-#define SRAM_OFFSET1 0x00200000
-#define SRAM_OFFSET2 0x0000F800
-#define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2)
-
-/* FPGA on Debug board.*/
-#define ETH_CONTROL_REG (H4_CS1_BASE+0x30b)
-#define LAN_RESET_REGISTER (H4_CS1_BASE+0x1c)
-#endif /* endif CONFIG_2420H4 */
-
-/* Common */
-#define LOW_LEVEL_SRAM_STACK 0x4020FFFC
-
-#define PERIFERAL_PORT_BASE 0x480FE003
-
-#endif
diff --git a/arch/arm/include/asm/arch-omap24xx/sys_info.h b/arch/arm/include/asm/arch-omap24xx/sys_info.h
deleted file mode 100644
index 53c231a..0000000
--- a/arch/arm/include/asm/arch-omap24xx/sys_info.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _OMAP24XX_SYS_INFO_H_
-#define _OMAP24XX_SYS_INFO_H_
-
-typedef struct h4_system_data {
- /* base board info */
- u32 base_b_rev; /* rev from base board i2c */
- /* cpu board info */
- u32 cpu_b_rev; /* rev from cpu board i2c */
- u32 cpu_b_mux; /* mux type on daughter board */
- u32 cpu_b_ddr_type; /* mem type */
- u32 cpu_b_ddr_speed; /* ddr speed rating */
- u32 cpu_b_switches; /* boot ctrl switch settings */
- /* cpu info */
- u32 cpu_type; /* type of cpu; 2420, 2422, 2430,...*/
- u32 cpu_rev; /* rev of given cpu; ES1, ES2,...*/
-} h4_sys_data;
-
-#define XDR_POP 5 /* package on package part */
-#define SDR_DISCRETE 4 /* 128M memory SDR module*/
-#define DDR_STACKED 3 /* stacked part on 2422 */
-#define DDR_COMBO 2 /* combo part on cpu daughter card (menalaeus) */
-#define DDR_DISCRETE 1 /* 2x16 parts on daughter card */
-
-#define DDR_100 100 /* type found on most mem d-boards */
-#define DDR_111 111 /* some combo parts */
-#define DDR_133 133 /* most combo, some mem d-boards */
-#define DDR_165 165 /* future parts */
-
-#define CPU_2420 0x2420
-#define CPU_2422 0x2422 /* 2420 + 64M stacked */
-#define CPU_2423 0x2423 /* 2420 + 96M stacked */
-
-#define CPU_2422_ES1 1
-#define CPU_2422_ES2 2
-#define CPU_2420_ES1 1
-#define CPU_2420_ES2 2
-#define CPU_2420_2422_ES1 1
-
-#define CPU_2420_CHIPID 0x0B5D9000
-#define CPU_24XX_ID_MASK 0x0FFFF000
-#define CPU_242X_REV_MASK 0xF0000000
-#define CPU_242X_PID_MASK 0x000F0000
-
-#define BOARD_H4_MENELAUS 1
-#define BOARD_H4_SDP 2
-
-#define GPMC_MUXED 1
-#define GPMC_NONMUXED 0
-
-#define TYPE_NAND 0x800 /* bit pos for nand in gpmc reg */
-#define TYPE_NOR 0x000
-
-#define WIDTH_8BIT 0x0000
-#define WIDTH_16BIT 0x1000 /* bit pos for 16 bit in gpmc */
-
-#define I2C_MENELAUS 0x72 /* i2c id for companion chip */
-
-#endif
diff --git a/arch/arm/include/asm/arch-omap24xx/sys_proto.h b/arch/arm/include/asm/arch-omap24xx/sys_proto.h
deleted file mode 100644
index 9d8e5b2..0000000
--- a/arch/arm/include/asm/arch-omap24xx/sys_proto.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef _OMAP24XX_SYS_PROTO_H_
-#define _OMAP24XX_SYS_PROTO_H_
-
-void prcm_init(void);
-void memif_init(void);
-void sdrc_init(void);
-void do_sdrc_init(u32,u32);
-void gpmc_init(void);
-
-void ether_init(void);
-void watchdog_init(void);
-void set_muxconf_regs(void);
-void peripheral_enable(void);
-
-u32 get_cpu_type(void);
-u32 get_cpu_rev(void);
-u32 get_mem_type(void);
-u32 get_sysboot_value(void);
-u32 get_gpmc0_base(void);
-u32 is_gpmc_muxed(void);
-u32 get_gpmc0_type(void);
-u32 get_gpmc0_width(void);
-u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound);
-u32 get_board_type(void);
-void display_board_info(u32);
-void update_mux(u32,u32);
-u32 get_sdr_cs_size(u32 offset);
-
-u32 running_in_sdram(void);
-u32 running_in_sram(void);
-u32 running_in_flash(void);
-u32 running_from_internal_boot(void);
-u32 get_device_type(void);
-#endif
diff --git a/arch/arm/include/asm/arch-omap3/clocks.h b/arch/arm/include/asm/arch-omap3/clock.h
similarity index 100%
rename from arch/arm/include/asm/arch-omap3/clocks.h
rename to arch/arm/include/asm/arch-omap3/clock.h
diff --git a/arch/arm/include/asm/arch-omap3/omap3.h b/arch/arm/include/asm/arch-omap3/omap3.h
index 2b5e9ae..c57599a 100644
--- a/arch/arm/include/asm/arch-omap3/omap3.h
+++ b/arch/arm/include/asm/arch-omap3/omap3.h
@@ -253,4 +253,11 @@
#define OMAP3_EMU_HAL_START_HAL_CRITICAL 4
+/* ABB settings */
+#define OMAP_ABB_SETTLING_TIME 30
+#define OMAP_ABB_CLOCK_CYCLES 8
+
+/* ABB tranxdone mask */
+#define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 26)
+
#endif
diff --git a/arch/arm/include/asm/arch-omap4/clocks.h b/arch/arm/include/asm/arch-omap4/clock.h
similarity index 89%
rename from arch/arm/include/asm/arch-omap4/clocks.h
rename to arch/arm/include/asm/arch-omap4/clock.h
index ed7a1c8..d14d8fb 100644
--- a/arch/arm/include/asm/arch-omap4/clocks.h
+++ b/arch/arm/include/asm/arch-omap4/clock.h
@@ -34,25 +34,6 @@
*/
#define LDELAY 1000000
-#define CM_CLKMODE_DPLL_CORE 0x4A004120
-#define CM_CLKMODE_DPLL_PER 0x4A008140
-#define CM_CLKMODE_DPLL_MPU 0x4A004160
-#define CM_CLKSEL_CORE 0x4A004100
-
-/* DPLL register offsets */
-#define CM_CLKMODE_DPLL 0
-#define CM_IDLEST_DPLL 0x4
-#define CM_AUTOIDLE_DPLL 0x8
-#define CM_CLKSEL_DPLL 0xC
-#define CM_DIV_M2_DPLL 0x10
-#define CM_DIV_M3_DPLL 0x14
-#define CM_DIV_M4_DPLL 0x18
-#define CM_DIV_M5_DPLL 0x1C
-#define CM_DIV_M6_DPLL 0x20
-#define CM_DIV_M7_DPLL 0x24
-
-#define DPLL_CLKOUT_DIV_MASK 0x1F /* post-divider mask */
-
/* CM_DLL_CTRL */
#define CM_DLL_CTRL_OVERRIDE_SHIFT 0
#define CM_DLL_CTRL_OVERRIDE_MASK (1 << 0)
@@ -94,10 +75,8 @@
#define CM_CLKSEL_DCC_EN_SHIFT 22
#define CM_CLKSEL_DCC_EN_MASK (1 << 22)
-#define OMAP4_DPLL_MAX_N 127
-
/* CM_SYS_CLKSEL */
-#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK 7
+#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK 7
/* CM_CLKSEL_CORE */
#define CLKSEL_CORE_SHIFT 0
@@ -181,9 +160,7 @@
#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK (1 << 25)
/* Clock frequencies */
-#define OMAP_SYS_CLK_FREQ_38_4_MHZ 38400000
#define OMAP_SYS_CLK_IND_38_4_MHZ 6
-#define OMAP_32K_CLK_FREQ 32768
/* PRM_VC_VAL_BYPASS */
#define PRM_VC_I2C_CHANNEL_FREQ_KHZ 400
@@ -234,14 +211,13 @@
#define ALTCLKSRC_MODE_ACTIVE 1
-/* Defines for DPLL setup */
-#define DPLL_LOCKED_FREQ_TOLERANCE_0 0
-#define DPLL_LOCKED_FREQ_TOLERANCE_500_KHZ 500
-#define DPLL_LOCKED_FREQ_TOLERANCE_1_MHZ 1000
-
#define DPLL_NO_LOCK 0
#define DPLL_LOCK 1
+/* Clock Defines */
+#define V_OSCK 38400000 /* Clock output from T2 */
+#define V_SCLK V_OSCK
+
struct omap4_scrm_regs {
u32 revision; /* 0x0000 */
u32 pad00[63];
diff --git a/arch/arm/include/asm/arch-omap4/cpu.h b/arch/arm/include/asm/arch-omap4/cpu.h
index 3a0bfbf..311c6ff 100644
--- a/arch/arm/include/asm/arch-omap4/cpu.h
+++ b/arch/arm/include/asm/arch-omap4/cpu.h
@@ -115,18 +115,6 @@
#define WD_UNLOCK1 0xAAAA
#define WD_UNLOCK2 0x5555
-#define SYSCLKDIV_1 (0x1 << 6)
-#define SYSCLKDIV_2 (0x1 << 7)
-
-#define CLKSEL_GPT1 (0x1 << 0)
-
-#define EN_GPT1 (0x1 << 0)
-#define EN_32KSYNC (0x1 << 2)
-
-#define ST_WDT2 (0x1 << 5)
-
-#define RESETDONE (0x1 << 0)
-
#define TCLR_ST (0x1 << 0)
#define TCLR_AR (0x1 << 1)
#define TCLR_PRE (0x1 << 5)
diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h
index ad984da..9fd00ff 100644
--- a/arch/arm/include/asm/arch-omap4/omap.h
+++ b/arch/arm/include/asm/arch-omap4/omap.h
@@ -47,14 +47,6 @@
#define DRAM_ADDR_SPACE_START OMAP44XX_DRAM_ADDR_SPACE_START
#define DRAM_ADDR_SPACE_END OMAP44XX_DRAM_ADDR_SPACE_END
-/* CONTROL */
-#define CTRL_BASE (OMAP44XX_L4_CORE_BASE + 0x2000)
-#define CONTROL_PADCONF_CORE (OMAP44XX_L4_CORE_BASE + 0x100000)
-#define CONTROL_PADCONF_WKUP (OMAP44XX_L4_CORE_BASE + 0x31E000)
-
-/* LPDDR2 IO regs */
-#define LPDDR2_IO_REGS_BASE 0x4A100638
-
/* CONTROL_ID_CODE */
#define CONTROL_ID_CODE 0x4A002204
@@ -79,15 +71,9 @@
/* Watchdog Timer2 - MPU watchdog */
#define WDT2_BASE (OMAP44XX_L4_WKUP_BASE + 0x14000)
-/* 32KTIMER */
-#define SYNC_32KTIMER_BASE (OMAP44XX_L4_WKUP_BASE + 0x4000)
-
/* GPMC */
#define OMAP44XX_GPMC_BASE 0x50000000
-/* SYSTEM CONTROL MODULE */
-#define SYSCTRL_GENERAL_CORE_BASE 0x4A002000
-
/*
* Hardware Register Details
*/
@@ -141,42 +127,15 @@
*/
#define NON_SECURE_SRAM_START 0x40304000
#define NON_SECURE_SRAM_END 0x4030E000 /* Not inclusive */
+#define SRAM_SCRATCH_SPACE_ADDR NON_SECURE_SRAM_START
/* base address for indirect vectors (internal boot mode) */
#define SRAM_ROM_VECT_BASE 0x4030D000
-/* Temporary SRAM stack used while low level init is done */
-#define SRAM_SCRATCH_SPACE_ADDR NON_SECURE_SRAM_START
-/* SRAM scratch space entries */
-#define OMAP4_SRAM_SCRATCH_OMAP4_REV SRAM_SCRATCH_SPACE_ADDR
-#define OMAP4_SRAM_SCRATCH_EMIF_T_NUM (SRAM_SCRATCH_SPACE_ADDR + 0xC)
-#define OMAP4_SRAM_SCRATCH_EMIF_T_DEN (SRAM_SCRATCH_SPACE_ADDR + 0x10)
-#define OMAP_SRAM_SCRATCH_PRCM_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x14)
-#define OMAP_SRAM_SCRATCH_DPLLS_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x18)
-#define OMAP_SRAM_SCRATCH_VCORES_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x1C)
-#define OMAP4_SRAM_SCRATCH_SYS_CTRL (SRAM_SCRATCH_SPACE_ADDR + 0x20)
-#define OMAP4_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x24)
-/* ROM code defines */
-/* Boot device */
-#define BOOT_DEVICE_MASK 0xFF
-#define BOOT_DEVICE_OFFSET 0x8
-#define DEV_DESC_PTR_OFFSET 0x4
-#define DEV_DATA_PTR_OFFSET 0x18
-#define BOOT_MODE_OFFSET 0x8
-#define RESET_REASON_OFFSET 0x9
-#define CH_FLAGS_OFFSET 0xA
+/* ABB settings */
+#define OMAP_ABB_SETTLING_TIME 50
+#define OMAP_ABB_CLOCK_CYCLES 16
-#define CH_FLAGS_CHSETTINGS (0x1 << 0)
-#define CH_FLAGS_CHRAM (0x1 << 1)
-#define CH_FLAGS_CHFLASH (0x1 << 2)
-#define CH_FLAGS_CHMMCSD (0x1 << 3)
+/* ABB tranxdone mask */
+#define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 7)
-#ifndef __ASSEMBLY__
-struct omap_boot_parameters {
- char *boot_message;
- unsigned int mem_boot_descriptor;
- unsigned char omap_bootdevice;
- unsigned char reset_reason;
- unsigned char ch_flags;
-};
-#endif
#endif
diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
index d5f1868..e413466 100644
--- a/arch/arm/include/asm/arch-omap4/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap4/sys_proto.h
@@ -22,11 +22,13 @@
#define _SYS_PROTO_H_
#include <asm/arch/omap.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
#include <asm/io.h>
#include <asm/omap_common.h>
#include <asm/arch/mux_omap4.h>
+DECLARE_GLOBAL_DATA_PTR;
+
struct omap_sysinfo {
char *board_string;
};
@@ -52,19 +54,15 @@
void sdram_init(void);
u32 omap_sdram_size(void);
u32 cortex_rev(void);
+void save_omap_boot_params(void);
void init_omap_revision(void);
void do_io_settings(void);
-void omap_vc_init(u16 speed_khz);
+void sri2c_init(void);
+void gpi2c_init(void);
int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data);
u32 warm_reset(void);
void force_emif_self_refresh(void);
-/*
- * This is used to verify if the configuration header
- * was executed by Romcode prior to control of transfer
- * to the bootloader. SPL is responsible for saving and
- * passing this to the u-boot.
- */
-extern struct omap_boot_parameters boot_params;
+void setup_warmreset_time(void);
static inline u32 running_from_sdram(void)
{
@@ -84,7 +82,7 @@
* variable by both SPL and u-boot.Check out for CHSETTINGS, which is a
* mandatory section if CH is present.
*/
- if ((boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS))
+ if ((gd->arch.omap_boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS))
return 0;
else
return running_from_sdram();
diff --git a/arch/arm/include/asm/arch-omap5/clocks.h b/arch/arm/include/asm/arch-omap5/clock.h
similarity index 70%
rename from arch/arm/include/asm/arch-omap5/clocks.h
rename to arch/arm/include/asm/arch-omap5/clock.h
index cfde374..4d2765d 100644
--- a/arch/arm/include/asm/arch-omap5/clocks.h
+++ b/arch/arm/include/asm/arch-omap5/clock.h
@@ -35,19 +35,6 @@
*/
#define LDELAY 1000000
-#define CM_CLKMODE_DPLL_CORE (OMAP54XX_L4_CORE_BASE + 0x4120)
-#define CM_CLKMODE_DPLL_PER (OMAP54XX_L4_CORE_BASE + 0x8140)
-#define CM_CLKMODE_DPLL_MPU (OMAP54XX_L4_CORE_BASE + 0x4160)
-#define CM_CLKSEL_CORE (OMAP54XX_L4_CORE_BASE + 0x4100)
-
-/* DPLL register offsets */
-#define CM_CLKMODE_DPLL 0
-#define CM_IDLEST_DPLL 0x4
-#define CM_AUTOIDLE_DPLL 0x8
-#define CM_CLKSEL_DPLL 0xC
-
-#define DPLL_CLKOUT_DIV_MASK 0x1F /* post-divider mask */
-
/* CM_DLL_CTRL */
#define CM_DLL_CTRL_OVERRIDE_SHIFT 0
#define CM_DLL_CTRL_OVERRIDE_MASK (1 << 0)
@@ -93,10 +80,8 @@
#define CM_CLKSEL_DCC_EN_SHIFT 22
#define CM_CLKSEL_DCC_EN_MASK (1 << 22)
-#define OMAP4_DPLL_MAX_N 127
-
/* CM_SYS_CLKSEL */
-#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK 7
+#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK 7
/* CM_CLKSEL_CORE */
#define CLKSEL_CORE_SHIFT 0
@@ -113,6 +98,12 @@
#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK 0
#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK 1
+/* CM_CLKSEL_ABE_PLL_SYS */
+#define CM_CLKSEL_ABE_PLL_SYS_CLKSEL_SHIFT 0
+#define CM_CLKSEL_ABE_PLL_SYS_CLKSEL_MASK 1
+#define CM_ABE_PLL_SYS_CLKSEL_SYSCLK1 0
+#define CM_ABE_PLL_SYS_CLKSEL_SYSCLK2 1
+
/* CM_BYPCLK_DPLL_IVA */
#define CM_BYPCLK_DPLL_IVA_CLKSEL_SHIFT 0
#define CM_BYPCLK_DPLL_IVA_CLKSEL_MASK 3
@@ -190,10 +181,12 @@
#define OPTFCLKEN_SRCOMP_FCLK_SHIFT 8
#define OPTFCLKEN_SRCOMP_FCLK_MASK (1 << 8)
+/* PRM_RSTTIME */
+#define RSTTIME1_SHIFT 0
+#define RSTTIME1_MASK (0x3ff << 0)
+
/* Clock frequencies */
-#define OMAP_SYS_CLK_FREQ_38_4_MHZ 38400000
#define OMAP_SYS_CLK_IND_38_4_MHZ 6
-#define OMAP_32K_CLK_FREQ 32768
/* PRM_VC_VAL_BYPASS */
#define PRM_VC_I2C_CHANNEL_FREQ_KHZ 400
@@ -225,9 +218,54 @@
#define VDD_MPU_ES2_LOW 880
#define VDD_MM_ES2_LOW 880
+/* TPS659038 Voltage settings in mv for OPP_NOMINAL */
+#define VDD_MPU_DRA752 1090
+#define VDD_EVE_DRA752 1060
+#define VDD_GPU_DRA752 1060
+#define VDD_CORE_DRA752 1030
+#define VDD_IVA_DRA752 1060
+
+/* Efuse register offsets for DRA7xx platform */
+#define DRA752_EFUSE_BASE 0x4A002000
+#define DRA752_EFUSE_REGBITS 16
+/* STD_FUSE_OPP_VMIN_IVA_2 */
+#define STD_FUSE_OPP_VMIN_IVA_NOM (DRA752_EFUSE_BASE + 0x05CC)
+/* STD_FUSE_OPP_VMIN_IVA_3 */
+#define STD_FUSE_OPP_VMIN_IVA_OD (DRA752_EFUSE_BASE + 0x05D0)
+/* STD_FUSE_OPP_VMIN_IVA_4 */
+#define STD_FUSE_OPP_VMIN_IVA_HIGH (DRA752_EFUSE_BASE + 0x05D4)
+/* STD_FUSE_OPP_VMIN_DSPEVE_2 */
+#define STD_FUSE_OPP_VMIN_DSPEVE_NOM (DRA752_EFUSE_BASE + 0x05E0)
+/* STD_FUSE_OPP_VMIN_DSPEVE_3 */
+#define STD_FUSE_OPP_VMIN_DSPEVE_OD (DRA752_EFUSE_BASE + 0x05E4)
+/* STD_FUSE_OPP_VMIN_DSPEVE_4 */
+#define STD_FUSE_OPP_VMIN_DSPEVE_HIGH (DRA752_EFUSE_BASE + 0x05E8)
+/* STD_FUSE_OPP_VMIN_CORE_2 */
+#define STD_FUSE_OPP_VMIN_CORE_NOM (DRA752_EFUSE_BASE + 0x05F4)
+/* STD_FUSE_OPP_VMIN_GPU_2 */
+#define STD_FUSE_OPP_VMIN_GPU_NOM (DRA752_EFUSE_BASE + 0x1B08)
+/* STD_FUSE_OPP_VMIN_GPU_3 */
+#define STD_FUSE_OPP_VMIN_GPU_OD (DRA752_EFUSE_BASE + 0x1B0C)
+/* STD_FUSE_OPP_VMIN_GPU_4 */
+#define STD_FUSE_OPP_VMIN_GPU_HIGH (DRA752_EFUSE_BASE + 0x1B10)
+/* STD_FUSE_OPP_VMIN_MPU_2 */
+#define STD_FUSE_OPP_VMIN_MPU_NOM (DRA752_EFUSE_BASE + 0x1B20)
+/* STD_FUSE_OPP_VMIN_MPU_3 */
+#define STD_FUSE_OPP_VMIN_MPU_OD (DRA752_EFUSE_BASE + 0x1B24)
+/* STD_FUSE_OPP_VMIN_MPU_4 */
+#define STD_FUSE_OPP_VMIN_MPU_HIGH (DRA752_EFUSE_BASE + 0x1B28)
+
/* Standard offset is 0.5v expressed in uv */
#define PALMAS_SMPS_BASE_VOLT_UV 500000
+/* TPS659038 */
+#define TPS659038_I2C_SLAVE_ADDR 0x58
+#define TPS659038_REG_ADDR_SMPS12_MPU 0x23
+#define TPS659038_REG_ADDR_SMPS45_EVE 0x2B
+#define TPS659038_REG_ADDR_SMPS6_GPU 0x2F
+#define TPS659038_REG_ADDR_SMPS7_CORE 0x33
+#define TPS659038_REG_ADDR_SMPS8_IVA 0x37
+
/* TPS */
#define TPS62361_I2C_SLAVE_ADDR 0x60
#define TPS62361_REG_ADDR_SET0 0x0
@@ -251,4 +289,31 @@
#define DPLL_NO_LOCK 0
#define DPLL_LOCK 1
+/*
+ * MAX value for PRM_RSTTIME[9:0]RSTTIME1 stored is 0x3ff.
+ * 0x3ff is in the no of FUNC_32K_CLK cycles. Converting cycles
+ * into microsec and passing the value.
+ */
+#define CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC 31219
+
+#ifdef CONFIG_DRA7XX
+#define V_OSCK 20000000 /* Clock output from T2 */
+#else
+#define V_OSCK 19200000 /* Clock output from T2 */
+#endif
+
+#define V_SCLK V_OSCK
+
+/* AUXCLKx reg fields */
+#define AUXCLK_ENABLE_MASK (1 << 8)
+#define AUXCLK_SRCSELECT_SHIFT 1
+#define AUXCLK_SRCSELECT_MASK (3 << 1)
+#define AUXCLK_CLKDIV_SHIFT 16
+#define AUXCLK_CLKDIV_MASK (0xF << 16)
+
+#define AUXCLK_SRCSELECT_SYS_CLK 0
+#define AUXCLK_SRCSELECT_CORE_DPLL 1
+#define AUXCLK_SRCSELECT_PER_DPLL 2
+#define AUXCLK_SRCSELECT_ALTERNATE 3
+
#endif /* _CLOCKS_OMAP5_H_ */
diff --git a/arch/arm/include/asm/arch-omap5/cpu.h b/arch/arm/include/asm/arch-omap5/cpu.h
index 5e62013..4753f46 100644
--- a/arch/arm/include/asm/arch-omap5/cpu.h
+++ b/arch/arm/include/asm/arch-omap5/cpu.h
@@ -119,18 +119,6 @@
#define WD_UNLOCK1 0xAAAA
#define WD_UNLOCK2 0x5555
-#define SYSCLKDIV_1 (0x1 << 6)
-#define SYSCLKDIV_2 (0x1 << 7)
-
-#define CLKSEL_GPT1 (0x1 << 0)
-
-#define EN_GPT1 (0x1 << 0)
-#define EN_32KSYNC (0x1 << 2)
-
-#define ST_WDT2 (0x1 << 5)
-
-#define RESETDONE (0x1 << 0)
-
#define TCLR_ST (0x1 << 0)
#define TCLR_AR (0x1 << 1)
#define TCLR_PRE (0x1 << 5)
@@ -142,6 +130,8 @@
#define I2C_BASE1 (OMAP54XX_L4_PER_BASE + 0x70000)
#define I2C_BASE2 (OMAP54XX_L4_PER_BASE + 0x72000)
#define I2C_BASE3 (OMAP54XX_L4_PER_BASE + 0x60000)
+#define I2C_BASE4 (OMAP54XX_L4_PER_BASE + 0x7A000)
+#define I2C_BASE5 (OMAP54XX_L4_PER_BASE + 0x7C000)
/* MUSB base */
#define MUSB_BASE (OMAP54XX_L4_CORE_BASE + 0xAB000)
diff --git a/arch/arm/include/asm/arch-omap5/i2c.h b/arch/arm/include/asm/arch-omap5/i2c.h
index 68be03b..ec39a53 100644
--- a/arch/arm/include/asm/arch-omap5/i2c.h
+++ b/arch/arm/include/asm/arch-omap5/i2c.h
@@ -23,7 +23,7 @@
#ifndef _OMAP5_I2C_H_
#define _OMAP5_I2C_H_
-#define I2C_BUS_MAX 3
+#define I2C_BUS_MAX 5
#define I2C_DEFAULT_BASE I2C_BASE1
struct i2c {
diff --git a/arch/arm/include/asm/arch-omap5/mux_dra7xx.h b/arch/arm/include/asm/arch-omap5/mux_dra7xx.h
index 55e9de6..5f2b0f9 100644
--- a/arch/arm/include/asm/arch-omap5/mux_dra7xx.h
+++ b/arch/arm/include/asm/arch-omap5/mux_dra7xx.h
@@ -28,11 +28,14 @@
#include <asm/types.h>
+#define FSC (1 << 19)
+#define SSC (0 << 19)
+
#define IEN (1 << 18)
#define IDIS (0 << 18)
-#define PTU (3 << 16)
-#define PTD (1 << 16)
+#define PTU (1 << 17)
+#define PTD (0 << 17)
#define PEN (1 << 16)
#define PDIS (0 << 16)
diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h
index 887fcaa..5e6d82e 100644
--- a/arch/arm/include/asm/arch-omap5/omap.h
+++ b/arch/arm/include/asm/arch-omap5/omap.h
@@ -44,16 +44,15 @@
#define DRAM_ADDR_SPACE_START OMAP54XX_DRAM_ADDR_SPACE_START
#define DRAM_ADDR_SPACE_END OMAP54XX_DRAM_ADDR_SPACE_END
-/* CONTROL */
-#define CTRL_BASE (OMAP54XX_L4_CORE_BASE + 0x2000)
-#define CONTROL_PADCONF_CORE (CTRL_BASE + 0x0800)
-#define CONTROL_PADCONF_WKUP (OMAP54XX_L4_WKUP_BASE + 0xc800)
+/* CONTROL ID CODE */
+#define CONTROL_CORE_ID_CODE 0x4A002204
+#define CONTROL_WKUP_ID_CODE 0x4AE0C204
-/* LPDDR2 IO regs. To be verified */
-#define LPDDR2_IO_REGS_BASE 0x4A100638
-
-/* CONTROL_ID_CODE */
-#define CONTROL_ID_CODE (CTRL_BASE + 0x204)
+#ifdef CONFIG_DRA7XX
+#define CONTROL_ID_CODE CONTROL_WKUP_ID_CODE
+#else
+#define CONTROL_ID_CODE CONTROL_CORE_ID_CODE
+#endif
/* To be verified */
#define OMAP5430_CONTROL_ID_CODE_ES1_0 0x0B94202F
@@ -62,11 +61,6 @@
#define OMAP5432_CONTROL_ID_CODE_ES2_0 0x1B99802F
#define DRA752_CONTROL_ID_CODE_ES1_0 0x0B99002F
-/* STD_FUSE_PROD_ID_1 */
-#define STD_FUSE_PROD_ID_1 (CTRL_BASE + 0x218)
-#define PROD_ID_1_SILICON_TYPE_SHIFT 16
-#define PROD_ID_1_SILICON_TYPE_MASK (3 << 16)
-
/* UART */
#define UART1_BASE (OMAP54XX_L4_PER_BASE + 0x6a000)
#define UART2_BASE (OMAP54XX_L4_PER_BASE + 0x6c000)
@@ -80,15 +74,9 @@
/* Watchdog Timer2 - MPU watchdog */
#define WDT2_BASE (OMAP54XX_L4_WKUP_BASE + 0x14000)
-/* 32KTIMER */
-#define SYNC_32KTIMER_BASE (OMAP54XX_L4_WKUP_BASE + 0x4000)
-
/* GPMC */
#define OMAP54XX_GPMC_BASE 0x50000000
-/* SYSTEM CONTROL MODULE */
-#define SYSCTRL_GENERAL_CORE_BASE 0x4A002000
-
/*
* Hardware Register Details
*/
@@ -118,9 +106,9 @@
/* CONTROL_EFUSE_2 */
#define CONTROL_EFUSE_2_NMOS_PMOS_PTV_CODE_1 0x00ffc000
+#define SDCARD_BIAS_PWRDNZ (1 << 27)
#define SDCARD_PWRDNZ (1 << 26)
#define SDCARD_BIAS_HIZ_MODE (1 << 25)
-#define SDCARD_BIAS_PWRDNZ (1 << 22)
#define SDCARD_PBIASLITE_VMODE (1 << 21)
#ifndef __ASSEMBLY__
@@ -181,54 +169,18 @@
#define EFUSE_4 0x45145100
#endif /* __ASSEMBLY__ */
-/*
- * Non-secure SRAM Addresses
- * Non-secure RAM starts at 0x40300000 for GP devices. But we keep SRAM_BASE
- * at 0x40304000(EMU base) so that our code works for both EMU and GP
- */
+#ifdef CONFIG_DRA7XX
+#define NON_SECURE_SRAM_START 0x40300000
+#define NON_SECURE_SRAM_END 0x40380000 /* Not inclusive */
+#else
#define NON_SECURE_SRAM_START 0x40300000
#define NON_SECURE_SRAM_END 0x40320000 /* Not inclusive */
+#endif
+#define SRAM_SCRATCH_SPACE_ADDR NON_SECURE_SRAM_START
+
/* base address for indirect vectors (internal boot mode) */
#define SRAM_ROM_VECT_BASE 0x4031F000
-#define SRAM_SCRATCH_SPACE_ADDR NON_SECURE_SRAM_START
-/*
- * SRAM scratch space entries
- */
-#define OMAP5_SRAM_SCRATCH_OMAP5_REV SRAM_SCRATCH_SPACE_ADDR
-#define OMAP5_SRAM_SCRATCH_EMIF_T_NUM (SRAM_SCRATCH_SPACE_ADDR + 0xC)
-#define OMAP5_SRAM_SCRATCH_EMIF_T_DEN (SRAM_SCRATCH_SPACE_ADDR + 0x10)
-#define OMAP_SRAM_SCRATCH_PRCM_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x14)
-#define OMAP_SRAM_SCRATCH_DPLLS_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x18)
-#define OMAP_SRAM_SCRATCH_VCORES_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x1C)
-#define OMAP5_SRAM_SCRATCH_SYS_CTRL (SRAM_SCRATCH_SPACE_ADDR + 0x20)
-#define OMAP5_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x24)
-
-/* Silicon revisions */
-#define OMAP4430_SILICON_ID_INVALID 0xFFFFFFFF
-#define OMAP4430_ES1_0 0x44300100
-#define OMAP4430_ES2_0 0x44300200
-#define OMAP4430_ES2_1 0x44300210
-#define OMAP4430_ES2_2 0x44300220
-#define OMAP4430_ES2_3 0x44300230
-#define OMAP4460_ES1_0 0x44600100
-#define OMAP4460_ES1_1 0x44600110
-
-/* ROM code defines */
-/* Boot device */
-#define BOOT_DEVICE_MASK 0xFF
-#define BOOT_DEVICE_OFFSET 0x8
-#define DEV_DESC_PTR_OFFSET 0x4
-#define DEV_DATA_PTR_OFFSET 0x18
-#define BOOT_MODE_OFFSET 0x8
-#define RESET_REASON_OFFSET 0x9
-#define CH_FLAGS_OFFSET 0xA
-
-#define CH_FLAGS_CHSETTINGS (0x1 << 0)
-#define CH_FLAGS_CHRAM (0x1 << 1)
-#define CH_FLAGS_CHFLASH (0x1 << 2)
-#define CH_FLAGS_CHMMCSD (0x1 << 3)
-
/* CONTROL_SRCOMP_XXX_SIDE */
#define OVERRIDE_XS_SHIFT 30
#define OVERRIDE_XS_MASK (1 << 30)
@@ -243,20 +195,25 @@
#define SRCODE_OVERRIDE_SEL_XS_SHIFT 0
#define SRCODE_OVERRIDE_SEL_XS_MASK (1 << 0)
+/* ABB settings */
+#define OMAP_ABB_SETTLING_TIME 50
+#define OMAP_ABB_CLOCK_CYCLES 16
+
+/* ABB tranxdone mask */
+#define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 7)
+
+/* ABB efuse masks */
+#define OMAP5_ABB_FUSE_VSET_MASK (0x1F << 24)
+#define OMAP5_ABB_FUSE_ENABLE_MASK (0x1 << 29)
+#define OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK (0x1 << 10)
+#define OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK (0x1f << 0)
+
#ifndef __ASSEMBLY__
struct srcomp_params {
s8 divide_factor;
s8 multiply_factor;
};
-struct omap_boot_parameters {
- char *boot_message;
- unsigned int mem_boot_descriptor;
- unsigned char omap_bootdevice;
- unsigned char reset_reason;
- unsigned char ch_flags;
-};
-
struct ctrl_ioregs {
u32 ctrl_ddrch;
u32 ctrl_lpddr2ch;
@@ -265,6 +222,7 @@
u32 ctrl_ddrio_1;
u32 ctrl_ddrio_2;
u32 ctrl_emif_sdram_config_ext;
+ u32 ctrl_ddr_ctrl_ext_0;
};
#endif /* __ASSEMBLY__ */
#endif
diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h
index e66ab44..0bb59d8 100644
--- a/arch/arm/include/asm/arch-omap5/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap5/sys_proto.h
@@ -23,9 +23,11 @@
#include <asm/arch/omap.h>
#include <asm/io.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
#include <asm/omap_common.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
+
+DECLARE_GLOBAL_DATA_PTR;
struct pad_conf_entry {
u32 offset;
@@ -56,22 +58,17 @@
void sdram_init(void);
u32 omap_sdram_size(void);
u32 cortex_rev(void);
+void save_omap_boot_params(void);
void init_omap_revision(void);
void do_io_settings(void);
-void omap_vc_init(u16 speed_khz);
+void sri2c_init(void);
+void gpi2c_init(void);
int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data);
u32 warm_reset(void);
void force_emif_self_refresh(void);
void get_ioregs(const struct ctrl_ioregs **regs);
void srcomp_enable(void);
-
-/*
- * This is used to verify if the configuration header
- * was executed by Romcode prior to control of transfer
- * to the bootloader. SPL is responsible for saving and
- * passing this to the u-boot.
- */
-extern struct omap_boot_parameters boot_params;
+void setup_warmreset_time(void);
static inline u32 running_from_sdram(void)
{
@@ -91,7 +88,7 @@
* variable by both SPL and u-boot.Check out for CHSETTINGS, which is a
* mandatory section if CH is present.
*/
- if ((boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS))
+ if ((gd->arch.omap_boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS))
return 0;
else
return running_from_sdram();
@@ -122,4 +119,13 @@
#endif
}
+static inline u32 div_round_up(u32 num, u32 den)
+{
+ return (num + den - 1)/den;
+}
+
+static inline u32 usec_to_32k(u32 usec)
+{
+ return div_round_up(32768 * usec, 1000000);
+}
#endif
diff --git a/arch/arm/include/asm/arch-pxa/hardware.h b/arch/arm/include/asm/arch-pxa/hardware.h
index 44b800f..2397bce 100644
--- a/arch/arm/include/asm/arch-pxa/hardware.h
+++ b/arch/arm/include/asm/arch-pxa/hardware.h
@@ -77,17 +77,6 @@
#define GPIO_FALLING_EDGE 1
#define GPIO_RISING_EDGE 2
#define GPIO_BOTH_EDGES 3
-extern void set_GPIO_IRQ_edge( int gpio_nr, int edge_mask );
-
-/*
- * Handy routine to set GPIO alternate functions
- */
-extern void set_GPIO_mode( int gpio_mode );
-
-/*
- * return current lclk frequency in units of 10kHz
- */
-extern unsigned int get_lclk_frequency_10khz(void);
#endif
diff --git a/arch/arm/include/asm/arch-tegra/tegra.h b/arch/arm/include/asm/arch-tegra/tegra.h
index 3e642e9..5fe4838 100644
--- a/arch/arm/include/asm/arch-tegra/tegra.h
+++ b/arch/arm/include/asm/arch-tegra/tegra.h
@@ -72,6 +72,7 @@
/* These are the available SKUs (product types) for Tegra */
enum {
+ SKU_ID_T20_7 = 0x7,
SKU_ID_T20 = 0x8,
SKU_ID_T25SE = 0x14,
SKU_ID_AP25 = 0x17,
@@ -81,6 +82,7 @@
SKU_ID_T33 = 0x80,
SKU_ID_T30 = 0x81, /* Cardhu value */
SKU_ID_T114_ENG = 0x00, /* Dalmore value, unfused */
+ SKU_ID_T114_1 = 0x01,
};
/*
diff --git a/arch/arm/include/asm/arch-mx25/sys_proto.h b/arch/arm/include/asm/arch-vf610/clock.h
similarity index 63%
rename from arch/arm/include/asm/arch-mx25/sys_proto.h
rename to arch/arm/include/asm/arch-vf610/clock.h
index 46db341..04e418c 100644
--- a/arch/arm/include/asm/arch-mx25/sys_proto.h
+++ b/arch/arm/include/asm/arch-vf610/clock.h
@@ -1,9 +1,5 @@
/*
- * (C) Copyright 2009
- * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
+ * Copyright 2013 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -21,12 +17,23 @@
* MA 02111-1307 USA
*/
-#ifndef _SYS_PROTO_H_
-#define _SYS_PROTO_H_
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H
-void mx25_uart1_init_pins(void);
-#if defined CONFIG_FEC_MXC
-extern void mx25_fec_init_pins(void);
-#endif
+#include <common.h>
-#endif
+enum mxc_clock {
+ MXC_ARM_CLK = 0,
+ MXC_BUS_CLK,
+ MXC_IPG_CLK,
+ MXC_UART_CLK,
+ MXC_ESDHC_CLK,
+ MXC_FEC_CLK,
+};
+
+void enable_ocotp_clk(unsigned char enable);
+unsigned int mxc_get_clock(enum mxc_clock clk);
+
+#define imx_get_fecclk() mxc_get_clock(MXC_FEC_CLK)
+
+#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/arch/arm/include/asm/arch-vf610/crm_regs.h b/arch/arm/include/asm/arch-vf610/crm_regs.h
new file mode 100644
index 0000000..e3f703d
--- /dev/null
+++ b/arch/arm/include/asm/arch-vf610/crm_regs.h
@@ -0,0 +1,225 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ARCH_ARM_MACH_VF610_CCM_REGS_H__
+#define __ARCH_ARM_MACH_VF610_CCM_REGS_H__
+
+#ifndef __ASSEMBLY__
+
+/* Clock Controller Module (CCM) */
+struct ccm_reg {
+ u32 ccr;
+ u32 csr;
+ u32 ccsr;
+ u32 cacrr;
+ u32 cscmr1;
+ u32 cscdr1;
+ u32 cscdr2;
+ u32 cscdr3;
+ u32 cscmr2;
+ u32 cscdr4;
+ u32 ctor;
+ u32 clpcr;
+ u32 cisr;
+ u32 cimr;
+ u32 ccosr;
+ u32 cgpr;
+ u32 ccgr0;
+ u32 ccgr1;
+ u32 ccgr2;
+ u32 ccgr3;
+ u32 ccgr4;
+ u32 ccgr5;
+ u32 ccgr6;
+ u32 ccgr7;
+ u32 ccgr8;
+ u32 ccgr9;
+ u32 ccgr10;
+ u32 ccgr11;
+ u32 cmeor0;
+ u32 cmeor1;
+ u32 cmeor2;
+ u32 cmeor3;
+ u32 cmeor4;
+ u32 cmeor5;
+ u32 cppdsr;
+ u32 ccowr;
+ u32 ccpgr0;
+ u32 ccpgr1;
+ u32 ccpgr2;
+ u32 ccpgr3;
+};
+
+/* Analog components control digital interface (ANADIG) */
+struct anadig_reg {
+ u32 pll3_ctrl;
+ u32 resv0[3];
+ u32 pll7_ctrl;
+ u32 resv1[3];
+ u32 pll2_ctrl;
+ u32 resv2[3];
+ u32 pll2_ss;
+ u32 resv3[3];
+ u32 pll2_num;
+ u32 resv4[3];
+ u32 pll2_denom;
+ u32 resv5[3];
+ u32 pll4_ctrl;
+ u32 resv6[3];
+ u32 pll4_num;
+ u32 resv7[3];
+ u32 pll4_denom;
+ u32 pll6_ctrl;
+ u32 resv8[3];
+ u32 pll6_num;
+ u32 resv9[3];
+ u32 pll6_denom;
+ u32 resv10[3];
+ u32 pll5_ctrl;
+ u32 resv11[3];
+ u32 pll3_pfd;
+ u32 resv12[3];
+ u32 pll2_pfd;
+ u32 resv13[3];
+ u32 reg_1p1;
+ u32 resv14[3];
+ u32 reg_3p0;
+ u32 resv15[3];
+ u32 reg_2p5;
+ u32 resv16[7];
+ u32 ana_misc0;
+ u32 resv17[3];
+ u32 ana_misc1;
+ u32 resv18[63];
+ u32 anadig_digprog;
+ u32 resv19[3];
+ u32 pll1_ctrl;
+ u32 resv20[3];
+ u32 pll1_ss;
+ u32 resv21[3];
+ u32 pll1_num;
+ u32 resv22[3];
+ u32 pll1_denom;
+ u32 resv23[3];
+ u32 pll1_pdf;
+ u32 resv24[3];
+ u32 pll_lock;
+};
+#endif
+
+#define CCM_CCR_FIRC_EN (1 << 16)
+#define CCM_CCR_OSCNT_MASK 0xff
+#define CCM_CCR_OSCNT(v) ((v) & 0xff)
+
+#define CCM_CCSR_PLL2_PFD_CLK_SEL_OFFSET 19
+#define CCM_CCSR_PLL2_PFD_CLK_SEL_MASK (0x7 << 19)
+#define CCM_CCSR_PLL2_PFD_CLK_SEL(v) (((v) & 0x7) << 19)
+
+#define CCM_CCSR_PLL1_PFD_CLK_SEL_OFFSET 16
+#define CCM_CCSR_PLL1_PFD_CLK_SEL_MASK (0x7 << 16)
+#define CCM_CCSR_PLL1_PFD_CLK_SEL(v) (((v) & 0x7) << 16)
+
+#define CCM_CCSR_PLL2_PFD4_EN (1 << 15)
+#define CCM_CCSR_PLL2_PFD3_EN (1 << 14)
+#define CCM_CCSR_PLL2_PFD2_EN (1 << 13)
+#define CCM_CCSR_PLL2_PFD1_EN (1 << 12)
+#define CCM_CCSR_PLL1_PFD4_EN (1 << 11)
+#define CCM_CCSR_PLL1_PFD3_EN (1 << 10)
+#define CCM_CCSR_PLL1_PFD2_EN (1 << 9)
+#define CCM_CCSR_PLL1_PFD1_EN (1 << 8)
+
+#define CCM_CCSR_DDRC_CLK_SEL(v) ((v) << 6)
+#define CCM_CCSR_FAST_CLK_SEL(v) ((v) << 5)
+
+#define CCM_CCSR_SYS_CLK_SEL_OFFSET 0
+#define CCM_CCSR_SYS_CLK_SEL_MASK 0x7
+#define CCM_CCSR_SYS_CLK_SEL(v) ((v) & 0x7)
+
+#define CCM_CACRR_IPG_CLK_DIV_OFFSET 11
+#define CCM_CACRR_IPG_CLK_DIV_MASK (0x3 << 11)
+#define CCM_CACRR_IPG_CLK_DIV(v) (((v) & 0x3) << 11)
+#define CCM_CACRR_BUS_CLK_DIV_OFFSET 3
+#define CCM_CACRR_BUS_CLK_DIV_MASK (0x7 << 3)
+#define CCM_CACRR_BUS_CLK_DIV(v) (((v) & 0x7) << 3)
+#define CCM_CACRR_ARM_CLK_DIV_OFFSET 0
+#define CCM_CACRR_ARM_CLK_DIV_MASK 0x7
+#define CCM_CACRR_ARM_CLK_DIV(v) ((v) & 0x7)
+
+#define CCM_CSCMR1_ESDHC1_CLK_SEL_OFFSET 18
+#define CCM_CSCMR1_ESDHC1_CLK_SEL_MASK (0x3 << 18)
+#define CCM_CSCMR1_ESDHC1_CLK_SEL(v) (((v) & 0x3) << 18)
+
+#define CCM_CSCDR1_RMII_CLK_EN (1 << 24)
+
+#define CCM_CSCDR2_ESDHC1_EN (1 << 29)
+#define CCM_CSCDR2_ESDHC1_CLK_DIV_OFFSET 20
+#define CCM_CSCDR2_ESDHC1_CLK_DIV_MASK (0xf << 20)
+#define CCM_CSCDR2_ESDHC1_CLK_DIV(v) (((v) & 0xf) << 20)
+
+#define CCM_CSCMR2_RMII_CLK_SEL_OFFSET 4
+#define CCM_CSCMR2_RMII_CLK_SEL_MASK (0x3 << 4)
+#define CCM_CSCMR2_RMII_CLK_SEL(v) (((v) & 0x3) << 4)
+
+#define CCM_REG_CTRL_MASK 0xffffffff
+#define CCM_CCGR0_UART1_CTRL_MASK (0x3 << 16)
+#define CCM_CCGR1_PIT_CTRL_MASK (0x3 << 14)
+#define CCM_CCGR1_WDOGA5_CTRL_MASK (0x3 << 28)
+#define CCM_CCGR2_IOMUXC_CTRL_MASK (0x3 << 16)
+#define CCM_CCGR2_PORTA_CTRL_MASK (0x3 << 18)
+#define CCM_CCGR2_PORTB_CTRL_MASK (0x3 << 20)
+#define CCM_CCGR2_PORTC_CTRL_MASK (0x3 << 22)
+#define CCM_CCGR2_PORTD_CTRL_MASK (0x3 << 24)
+#define CCM_CCGR2_PORTE_CTRL_MASK (0x3 << 26)
+#define CCM_CCGR3_ANADIG_CTRL_MASK 0x3
+#define CCM_CCGR4_WKUP_CTRL_MASK (0x3 << 20)
+#define CCM_CCGR4_CCM_CTRL_MASK (0x3 << 22)
+#define CCM_CCGR4_GPC_CTRL_MASK (0x3 << 24)
+#define CCM_CCGR6_OCOTP_CTRL_MASK (0x3 << 10)
+#define CCM_CCGR6_DDRMC_CTRL_MASK (0x3 << 28)
+#define CCM_CCGR7_SDHC1_CTRL_MASK (0x3 << 4)
+#define CCM_CCGR9_FEC0_CTRL_MASK 0x3
+#define CCM_CCGR9_FEC1_CTRL_MASK (0x3 << 2)
+
+#define ANADIG_PLL2_CTRL_ENABLE (1 << 13)
+#define ANADIG_PLL2_CTRL_POWERDOWN (1 << 12)
+#define ANADIG_PLL2_CTRL_DIV_SELECT 1
+#define ANADIG_PLL1_CTRL_ENABLE (1 << 13)
+#define ANADIG_PLL1_CTRL_POWERDOWN (1 << 12)
+#define ANADIG_PLL1_CTRL_DIV_SELECT 1
+
+#define FASE_CLK_FREQ 24000000
+#define SLOW_CLK_FREQ 32000
+#define PLL1_PFD1_FREQ 500000000
+#define PLL1_PFD2_FREQ 452000000
+#define PLL1_PFD3_FREQ 396000000
+#define PLL1_PFD4_FREQ 528000000
+#define PLL1_MAIN_FREQ 528000000
+#define PLL2_PFD1_FREQ 500000000
+#define PLL2_PFD2_FREQ 396000000
+#define PLL2_PFD3_FREQ 339000000
+#define PLL2_PFD4_FREQ 413000000
+#define PLL2_MAIN_FREQ 528000000
+#define PLL3_MAIN_FREQ 480000000
+#define PLL3_PFD3_FREQ 298000000
+#define PLL5_MAIN_FREQ 500000000
+
+#define ENET_EXTERNAL_CLK 50000000
+#define AUDIO_EXTERNAL_CLK 24576000
+
+#endif /*__ARCH_ARM_MACH_VF610_CCM_REGS_H__ */
diff --git a/arch/arm/include/asm/arch-vf610/imx-regs.h b/arch/arm/include/asm/arch-vf610/imx-regs.h
new file mode 100644
index 0000000..c9df32a
--- /dev/null
+++ b/arch/arm/include/asm/arch-vf610/imx-regs.h
@@ -0,0 +1,419 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_IMX_REGS_H__
+#define __ASM_ARCH_IMX_REGS_H__
+
+#define ARCH_MXC
+
+#define IRAM_BASE_ADDR 0x3F000000 /* internal ram */
+#define IRAM_SIZE 0x00080000 /* 512 KB */
+
+#define AIPS0_BASE_ADDR 0x40000000
+#define AIPS1_BASE_ADDR 0x40080000
+
+/* AIPS 0 */
+#define MSCM_BASE_ADDR (AIPS0_BASE_ADDR + 0x00001000)
+#define MSCM_IR_BASE_ADDR (AIPS0_BASE_ADDR + 0x00001800)
+#define CA5SCU_BASE_ADDR (AIPS0_BASE_ADDR + 0x00002000)
+#define CA5_INTD_BASE_ADDR (AIPS0_BASE_ADDR + 0x00003000)
+#define CA5_L2C_BASE_ADDR (AIPS0_BASE_ADDR + 0x00006000)
+#define NIC0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00008000)
+#define NIC1_BASE_ADDR (AIPS0_BASE_ADDR + 0x00009000)
+#define NIC2_BASE_ADDR (AIPS0_BASE_ADDR + 0x0000A000)
+#define NIC3_BASE_ADDR (AIPS0_BASE_ADDR + 0x0000B000)
+#define NIC4_BASE_ADDR (AIPS0_BASE_ADDR + 0x0000C000)
+#define NIC5_BASE_ADDR (AIPS0_BASE_ADDR + 0x0000D000)
+#define NIC6_BASE_ADDR (AIPS0_BASE_ADDR + 0x0000E000)
+#define NIC7_BASE_ADDR (AIPS0_BASE_ADDR + 0x0000F000)
+#define AHBTZASC_BASE_ADDR (AIPS0_BASE_ADDR + 0x00010000)
+#define TZASC_SYS0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00011000)
+#define TZASC_SYS1_BASE_ADDR (AIPS0_BASE_ADDR + 0x00012000)
+#define TZASC_GFX_BASE_ADDR (AIPS0_BASE_ADDR + 0x00013000)
+#define TZASC_DDR0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00014000)
+#define TZASC_DDR1_BASE_ADDR (AIPS0_BASE_ADDR + 0x00015000)
+#define CSU_BASE_ADDR (AIPS0_BASE_ADDR + 0x00017000)
+#define DMA0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00018000)
+#define DMA0_TCD_BASE_ADDR (AIPS0_BASE_ADDR + 0x00019000)
+#define SEMA4_BASE_ADDR (AIPS0_BASE_ADDR + 0x0001D000)
+#define FB_BASE_ADDR (AIPS0_BASE_ADDR + 0x0001E000)
+#define DMA_MUX0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00024000)
+#define UART0_BASE (AIPS0_BASE_ADDR + 0x00027000)
+#define UART1_BASE (AIPS0_BASE_ADDR + 0x00028000)
+#define UART2_BASE (AIPS0_BASE_ADDR + 0x00029000)
+#define UART3_BASE (AIPS0_BASE_ADDR + 0x0002A000)
+#define SPI0_BASE_ADDR (AIPS0_BASE_ADDR + 0x0002C000)
+#define SPI1_BASE_ADDR (AIPS0_BASE_ADDR + 0x0002D000)
+#define SAI0_BASE_ADDR (AIPS0_BASE_ADDR + 0x0002F000)
+#define SAI1_BASE_ADDR (AIPS0_BASE_ADDR + 0x00030000)
+#define SAI2_BASE_ADDR (AIPS0_BASE_ADDR + 0x00031000)
+#define SAI3_BASE_ADDR (AIPS0_BASE_ADDR + 0x00032000)
+#define CRC_BASE_ADDR (AIPS0_BASE_ADDR + 0x00033000)
+#define PDB_BASE_ADDR (AIPS0_BASE_ADDR + 0x00036000)
+#define PIT_BASE_ADDR (AIPS0_BASE_ADDR + 0x00037000)
+#define FTM0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00038000)
+#define FTM1_BASE_ADDR (AIPS0_BASE_ADDR + 0x00039000)
+#define ADC_BASE_ADDR (AIPS0_BASE_ADDR + 0x0003B000)
+#define TCON0_BASE_ADDR (AIPS0_BASE_ADDR + 0x0003D000)
+#define WDOG1_BASE_ADDR (AIPS0_BASE_ADDR + 0x0003E000)
+#define LPTMR_BASE_ADDR (AIPS0_BASE_ADDR + 0x00040000)
+#define RLE_BASE_ADDR (AIPS0_BASE_ADDR + 0x00042000)
+#define MLB_BASE_ADDR (AIPS0_BASE_ADDR + 0x00043000)
+#define QSPI0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00044000)
+#define IOMUXC_BASE_ADDR (AIPS0_BASE_ADDR + 0x00048000)
+#define ANADIG_BASE_ADDR (AIPS0_BASE_ADDR + 0x00050000)
+#define SCSCM_BASE_ADDR (AIPS0_BASE_ADDR + 0x00052000)
+#define ASRC_BASE_ADDR (AIPS0_BASE_ADDR + 0x00060000)
+#define SPDIF_BASE_ADDR (AIPS0_BASE_ADDR + 0x00061000)
+#define ESAI_BASE_ADDR (AIPS0_BASE_ADDR + 0x00062000)
+#define ESAI_FIFO_BASE_ADDR (AIPS0_BASE_ADDR + 0x00063000)
+#define WDOG_BASE_ADDR (AIPS0_BASE_ADDR + 0x00065000)
+#define I2C0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00066000)
+#define WKUP_BASE_ADDR (AIPS0_BASE_ADDR + 0x0006A000)
+#define CCM_BASE_ADDR (AIPS0_BASE_ADDR + 0x0006B000)
+#define GPC_BASE_ADDR (AIPS0_BASE_ADDR + 0x0006C000)
+#define VREG_DIG_BASE_ADDR (AIPS0_BASE_ADDR + 0x0006D000)
+#define SRC_BASE_ADDR (AIPS0_BASE_ADDR + 0x0006E000)
+#define CMU_BASE_ADDR (AIPS0_BASE_ADDR + 0x0006F000)
+
+/* AIPS 1 */
+#define OCOTP_BASE_ADDR (AIPS1_BASE_ADDR + 0x00025000)
+#define DDR_BASE_ADDR (AIPS1_BASE_ADDR + 0x0002E000)
+#define ESDHC0_BASE_ADDR (AIPS1_BASE_ADDR + 0x00031000)
+#define ESDHC1_BASE_ADDR (AIPS1_BASE_ADDR + 0x00032000)
+#define ENET_BASE_ADDR (AIPS1_BASE_ADDR + 0x00050000)
+
+/* MUX mode and PAD ctrl are in one register */
+#define CONFIG_IOMUX_SHARE_CONF_REG
+
+#define FEC_QUIRK_ENET_MAC
+
+/* MSCM interrupt rounter */
+#define MSCM_IRSPRC_CP0_EN 1
+#define MSCM_IRSPRC_NUM 112
+
+/* DDRMC */
+#define DDRMC_PHY_DQ_TIMING 0x00002613
+#define DDRMC_PHY_DQS_TIMING 0x00002615
+#define DDRMC_PHY_CTRL 0x01210080
+#define DDRMC_PHY_MASTER_CTRL 0x0001012a
+#define DDRMC_PHY_SLAVE_CTRL 0x00012020
+
+#define DDRMC_PHY50_DDR3_MODE (1 << 12)
+#define DDRMC_PHY50_EN_SW_HALF_CYCLE (1 << 8)
+
+#define DDRMC_CR00_DRAM_CLASS_DDR3 (0x6 << 8)
+#define DDRMC_CR00_DRAM_CLASS_LPDDR2 (0x5 << 8)
+#define DDRMC_CR00_START 1
+#define DDRMC_CR02_DRAM_TINIT(v) ((v) & 0xffffff)
+#define DDRMC_CR10_TRST_PWRON(v) (v)
+#define DDRMC_CR11_CKE_INACTIVE(v) (v)
+#define DDRMC_CR12_WRLAT(v) (((v) & 0x1f) << 8)
+#define DDRMC_CR12_CASLAT_LIN(v) ((v) & 0x3f)
+#define DDRMC_CR13_TRC(v) (((v) & 0xff) << 24)
+#define DDRMC_CR13_TRRD(v) (((v) & 0xff) << 16)
+#define DDRMC_CR13_TCCD(v) (((v) & 0x1f) << 8)
+#define DDRMC_CR13_TBST_INT_INTERVAL(v) ((v) & 0x7)
+#define DDRMC_CR14_TFAW(v) (((v) & 0x3f) << 24)
+#define DDRMC_CR14_TRP(v) (((v) & 0x1f) << 16)
+#define DDRMC_CR14_TWTR(v) (((v) & 0xf) << 8)
+#define DDRMC_CR14_TRAS_MIN(v) ((v) & 0xff)
+#define DDRMC_CR16_TMRD(v) (((v) & 0x1f) << 24)
+#define DDRMC_CR16_TRTP(v) (((v) & 0xf) << 16)
+#define DDRMC_CR17_TRAS_MAX(v) (((v) & 0x1ffff) << 8)
+#define DDRMC_CR17_TMOD(v) ((v) & 0xff)
+#define DDRMC_CR18_TCKESR(v) (((v) & 0x1f) << 8)
+#define DDRMC_CR18_TCKE(v) ((v) & 0x7)
+#define DDRMC_CR20_AP_EN (1 << 24)
+#define DDRMC_CR21_TRCD_INT(v) (((v) & 0xff) << 16)
+#define DDRMC_CR21_TRAS_LOCKOUT (1 << 8)
+#define DDRMC_CR21_CCMAP_EN 1
+#define DDRMC_CR22_TDAL(v) (((v) & 0x3f) << 16)
+#define DDRMC_CR23_BSTLEN(v) (((v) & 0x7) << 24)
+#define DDRMC_CR23_TDLL(v) ((v) & 0xff)
+#define DDRMC_CR24_TRP_AB(v) ((v) & 0x1f)
+#define DDRMC_CR25_TREF_EN (1 << 16)
+#define DDRMC_CR26_TREF(v) (((v) & 0xffff) << 16)
+#define DDRMC_CR26_TRFC(v) ((v) & 0x3ff)
+#define DDRMC_CR28_TREF_INT(v) ((v) & 0xffff)
+#define DDRMC_CR29_TPDEX(v) ((v) & 0xffff)
+#define DDRMC_CR30_TXPDLL(v) ((v) & 0xffff)
+#define DDRMC_CR31_TXSNR(v) (((v) & 0xffff) << 16)
+#define DDRMC_CR31_TXSR(v) ((v) & 0xffff)
+#define DDRMC_CR33_EN_QK_SREF (1 << 16)
+#define DDRMC_CR34_CKSRX(v) (((v) & 0xf) << 16)
+#define DDRMC_CR34_CKSRE(v) (((v) & 0xf) << 8)
+#define DDRMC_CR38_FREQ_CHG_EN (1 << 8)
+#define DDRMC_CR39_PHY_INI_COM(v) (((v) & 0xffff) << 16)
+#define DDRMC_CR39_PHY_INI_STA(v) (((v) & 0xff) << 8)
+#define DDRMC_CR39_FRQ_CH_DLLOFF(v) ((v) & 0x3)
+#define DDRMC_CR41_PHY_INI_STRT_INI_DIS 1
+#define DDRMC_CR48_MR1_DA_0(v) (((v) & 0xffff) << 16)
+#define DDRMC_CR48_MR0_DA_0(v) ((v) & 0xffff)
+#define DDRMC_CR66_ZQCL(v) (((v) & 0xfff) << 16)
+#define DDRMC_CR66_ZQINIT(v) ((v) & 0xfff)
+#define DDRMC_CR67_ZQCS(v) ((v) & 0xfff)
+#define DDRMC_CR69_ZQ_ON_SREF_EX(v) (((v) & 0xf) << 8)
+#define DDRMC_CR70_REF_PER_ZQ(v) (v)
+#define DDRMC_CR72_ZQCS_ROTATE (1 << 24)
+#define DDRMC_CR73_APREBIT(v) (((v) & 0xf) << 24)
+#define DDRMC_CR73_COL_DIFF(v) (((v) & 0x7) << 16)
+#define DDRMC_CR73_ROW_DIFF(v) (((v) & 0x3) << 8)
+#define DDRMC_CR74_BANKSPLT_EN (1 << 24)
+#define DDRMC_CR74_ADDR_CMP_EN (1 << 16)
+#define DDRMC_CR74_CMD_AGE_CNT(v) (((v) & 0xff) << 8)
+#define DDRMC_CR74_AGE_CNT(v) ((v) & 0xff)
+#define DDRMC_CR75_RW_PG_EN (1 << 24)
+#define DDRMC_CR75_RW_EN (1 << 16)
+#define DDRMC_CR75_PRI_EN (1 << 8)
+#define DDRMC_CR75_PLEN 1
+#define DDRMC_CR76_NQENT_ACTDIS(v) (((v) & 0x7) << 24)
+#define DDRMC_CR76_D_RW_G_BKCN(v) (((v) & 0x3) << 16)
+#define DDRMC_CR76_W2R_SPLT_EN (1 << 8)
+#define DDRMC_CR76_CS_EN 1
+#define DDRMC_CR77_CS_MAP (1 << 24)
+#define DDRMC_CR77_DI_RD_INTLEAVE (1 << 8)
+#define DDRMC_CR77_SWAP_EN 1
+#define DDRMC_CR78_BUR_ON_FLY_BIT(v) ((v) & 0xf)
+#define DDRMC_CR79_CTLUPD_AREF (1 << 24)
+#define DDRMC_CR82_INT_MASK 0x1fffffff
+#define DDRMC_CR87_ODT_WR_MAPCS0 (1 << 24)
+#define DDRMC_CR87_ODT_RD_MAPCS0 (1 << 16)
+#define DDRMC_CR88_TODTL_CMD(v) (((v) & 0x1f) << 16)
+#define DDRMC_CR89_AODT_RWSMCS(v) ((v) & 0xf)
+#define DDRMC_CR91_R2W_SMCSDL(v) (((v) & 0x7) << 16)
+#define DDRMC_CR96_WLMRD(v) (((v) & 0x3f) << 8)
+#define DDRMC_CR96_WLDQSEN(v) ((v) & 0x3f)
+#define DDRMC_CR105_RDLVL_DL_0(v) (((v) & 0xff) << 8)
+#define DDRMC_CR110_RDLVL_DL_1(v) ((v) & 0xff)
+#define DDRMC_CR114_RDLVL_GTDL_2(v) (((v) & 0xffff) << 8)
+#define DDRMC_CR117_AXI0_W_PRI(v) (((v) & 0x3) << 8)
+#define DDRMC_CR117_AXI0_R_PRI(v) ((v) & 0x3)
+#define DDRMC_CR118_AXI1_W_PRI(v) (((v) & 0x3) << 24)
+#define DDRMC_CR118_AXI1_R_PRI(v) (((v) & 0x3) << 16)
+#define DDRMC_CR120_AXI0_PRI1_RPRI(v) (((v) & 0xf) << 24)
+#define DDRMC_CR120_AXI0_PRI0_RPRI(v) (((v) & 0xf) << 16)
+#define DDRMC_CR121_AXI0_PRI3_RPRI(v) (((v) & 0xf) << 8)
+#define DDRMC_CR121_AXI0_PRI2_RPRI(v) ((v) & 0xf)
+#define DDRMC_CR122_AXI1_PRI1_RPRI(v) (((v) & 0xf) << 24)
+#define DDRMC_CR122_AXI1_PRI0_RPRI(v) (((v) & 0xf) << 16)
+#define DDRMC_CR122_AXI0_PRIRLX(v) ((v) & 0x3ff)
+#define DDRMC_CR123_AXI1_PRI3_RPRI(v) (((v) & 0xf) << 8)
+#define DDRMC_CR123_AXI1_PRI2_RPRI(v) ((v) & 0xf)
+#define DDRMC_CR124_AXI1_PRIRLX(v) ((v) & 0x3ff)
+#define DDRMC_CR126_PHY_RDLAT(v) (((v) & 0x3f) << 8)
+#define DDRMC_CR132_WRLAT_ADJ(v) (((v) & 0x1f) << 8)
+#define DDRMC_CR132_RDLAT_ADJ(v) ((v) & 0x3f)
+#define DDRMC_CR139_PHY_WRLV_RESPLAT(v) (((v) & 0xff) << 24)
+#define DDRMC_CR139_PHY_WRLV_LOAD(v) (((v) & 0xff) << 16)
+#define DDRMC_CR139_PHY_WRLV_DLL(v) (((v) & 0xff) << 8)
+#define DDRMC_CR139_PHY_WRLV_EN(v) ((v) & 0xff)
+#define DDRMC_CR154_PAD_ZQ_EARLY_CMP_EN_TIMER(v) (((v) & 0x1f) << 27)
+#define DDRMC_CR154_PAD_ZQ_MODE(v) (((v) & 0x3) << 21)
+#define DDRMC_CR155_AXI0_AWCACHE (1 << 10)
+#define DDRMC_CR155_PAD_ODT_BYTE1(v) ((v) & 0x7)
+#define DDRMC_CR158_TWR(v) ((v) & 0x3f)
+
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+#include <asm/types.h>
+
+/* System Reset Controller (SRC) */
+struct src {
+ u32 scr;
+ u32 sbmr1;
+ u32 srsr;
+ u32 secr;
+ u32 gpsr;
+ u32 sicr;
+ u32 simr;
+ u32 sbmr2;
+ u32 gpr0;
+ u32 gpr1;
+ u32 gpr2;
+ u32 gpr3;
+ u32 gpr4;
+ u32 hab0;
+ u32 hab1;
+ u32 hab2;
+ u32 hab3;
+ u32 hab4;
+ u32 hab5;
+ u32 misc0;
+ u32 misc1;
+ u32 misc2;
+ u32 misc3;
+};
+
+/* Periodic Interrupt Timer (PIT) */
+struct pit_reg {
+ u32 mcr;
+ u32 recv0[55];
+ u32 ltmr64h;
+ u32 ltmr64l;
+ u32 recv1[6];
+ u32 ldval0;
+ u32 cval0;
+ u32 tctrl0;
+ u32 tflg0;
+ u32 ldval1;
+ u32 cval1;
+ u32 tctrl1;
+ u32 tflg1;
+ u32 ldval2;
+ u32 cval2;
+ u32 tctrl2;
+ u32 tflg2;
+ u32 ldval3;
+ u32 cval3;
+ u32 tctrl3;
+ u32 tflg3;
+ u32 ldval4;
+ u32 cval4;
+ u32 tctrl4;
+ u32 tflg4;
+ u32 ldval5;
+ u32 cval5;
+ u32 tctrl5;
+ u32 tflg5;
+ u32 ldval6;
+ u32 cval6;
+ u32 tctrl6;
+ u32 tflg6;
+ u32 ldval7;
+ u32 cval7;
+ u32 tctrl7;
+ u32 tflg7;
+};
+
+/* Watchdog Timer (WDOG) */
+struct wdog_regs {
+ u16 wcr;
+ u16 wsr;
+ u16 wrsr;
+ u16 wicr;
+ u16 wmcr;
+};
+
+/* LPDDR2/DDR3 SDRAM Memory Controller (DDRMC) */
+struct ddrmr_regs {
+ u32 cr[162];
+ u32 rsvd[94];
+ u32 phy[53];
+};
+
+/* On-Chip One Time Programmable Controller (OCOTP) */
+struct ocotp_regs {
+ u32 ctrl;
+ u32 ctrl_set;
+ u32 ctrl_clr;
+ u32 ctrl_tog;
+ u32 timing;
+ u32 rsvd0[3];
+ u32 data;
+ u32 rsvd1[3];
+ u32 read_ctrl;
+ u32 rsvd2[3];
+ u32 read_fuse_data;
+ u32 rsvd3[7];
+ u32 scs;
+ u32 scs_set;
+ u32 scs_clr;
+ u32 scs_tog;
+ u32 crc_addr;
+ u32 rsvd4[3];
+ u32 crc_value;
+ u32 rsvd5[3];
+ u32 version;
+ u32 rsvd6[0xdb];
+
+ struct fuse_bank {
+ u32 fuse_regs[0x20];
+ } bank[16];
+};
+
+struct fuse_bank0_regs {
+ u32 lock;
+ u32 rsvd0[3];
+ u32 uid_low;
+ u32 rsvd1[3];
+ u32 uid_high;
+ u32 rsvd2[0x17];
+};
+
+struct fuse_bank4_regs {
+ u32 sjc_resp0;
+ u32 rsvd0[3];
+ u32 sjc_resp1;
+ u32 rsvd1[3];
+ u32 mac_addr0;
+ u32 rsvd2[3];
+ u32 mac_addr1;
+ u32 rsvd3[3];
+ u32 mac_addr2;
+ u32 rsvd4[3];
+ u32 mac_addr3;
+ u32 rsvd5[3];
+ u32 gp1;
+ u32 rsvd6[3];
+ u32 gp2;
+ u32 rsvd7[3];
+};
+
+/* UART */
+struct lpuart_fsl {
+ u8 ubdh;
+ u8 ubdl;
+ u8 uc1;
+ u8 uc2;
+ u8 us1;
+ u8 us2;
+ u8 uc3;
+ u8 ud;
+ u8 uma1;
+ u8 uma2;
+ u8 uc4;
+ u8 uc5;
+ u8 ued;
+ u8 umodem;
+ u8 uir;
+ u8 reserved;
+ u8 upfifo;
+ u8 ucfifo;
+ u8 usfifo;
+ u8 utwfifo;
+ u8 utcfifo;
+ u8 urwfifo;
+ u8 urcfifo;
+ u8 rsvd[28];
+};
+
+/* MSCM Interrupt Router */
+struct mscm_ir {
+ u32 ircp0ir;
+ u32 ircp1ir;
+ u32 rsvd1[6];
+ u32 ircpgir;
+ u32 rsvd2[23];
+ u16 irsprc[112];
+ u16 rsvd3[848];
+};
+
+#endif /* __ASSEMBLER__*/
+
+#endif /* __ASM_ARCH_IMX_REGS_H__ */
diff --git a/arch/arm/include/asm/arch-vf610/iomux-vf610.h b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
new file mode 100644
index 0000000..1c728fa
--- /dev/null
+++ b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
@@ -0,0 +1,101 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __IOMUX_VF610_H__
+#define __IOMUX_VF610_H__
+
+#include <asm/imx-common/iomux-v3.h>
+
+/* Pad control groupings */
+#define VF610_UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_25ohm | \
+ PAD_CTL_OBE_IBE_ENABLE)
+#define VF610_SDHC_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_20ohm | \
+ PAD_CTL_OBE_IBE_ENABLE)
+#define VF610_ENET_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_50ohm | \
+ PAD_CTL_OBE_IBE_ENABLE)
+#define VF610_DDR_PAD_CTRL PAD_CTL_DSE_25ohm
+
+enum {
+ VF610_PAD_PTA6__RMII0_CLKIN = IOMUX_PAD(0x0000, 0x0000, 2, __NA_, 0, VF610_ENET_PAD_CTRL),
+ VF610_PAD_PTB4__UART1_TX = IOMUX_PAD(0x0068, 0x0068, 2, 0x0380, 0, VF610_UART_PAD_CTRL),
+ VF610_PAD_PTB5__UART1_RX = IOMUX_PAD(0x006c, 0x006c, 2, 0x037c, 0, VF610_UART_PAD_CTRL),
+ VF610_PAD_PTC1__RMII0_MDIO = IOMUX_PAD(0x00b8, 0x00b8, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+ VF610_PAD_PTC0__RMII0_MDC = IOMUX_PAD(0x00b4, 0x00b4, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+ VF610_PAD_PTC2__RMII0_CRS_DV = IOMUX_PAD(0x00bc, 0x00bc, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+ VF610_PAD_PTC3__RMII0_RD1 = IOMUX_PAD(0x00c0, 0x00c0, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+ VF610_PAD_PTC4__RMII0_RD0 = IOMUX_PAD(0x00c4, 0x00c4, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+ VF610_PAD_PTC5__RMII0_RXER = IOMUX_PAD(0x00c8, 0x00c8, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+ VF610_PAD_PTC6__RMII0_TD1 = IOMUX_PAD(0x00cc, 0x00cc, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+ VF610_PAD_PTC7__RMII0_TD0 = IOMUX_PAD(0x00D0, 0x00D0, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+ VF610_PAD_PTC8__RMII0_TXEN = IOMUX_PAD(0x00D4, 0x00D4, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+ VF610_PAD_PTA24__ESDHC1_CLK = IOMUX_PAD(0x0038, 0x0038, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
+ VF610_PAD_PTA25__ESDHC1_CMD = IOMUX_PAD(0x003c, 0x003c, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
+ VF610_PAD_PTA26__ESDHC1_DAT0 = IOMUX_PAD(0x0040, 0x0040, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
+ VF610_PAD_PTA27__ESDHC1_DAT1 = IOMUX_PAD(0x0044, 0x0044, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
+ VF610_PAD_PTA28__ESDHC1_DAT2 = IOMUX_PAD(0x0048, 0x0048, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
+ VF610_PAD_PTA29__ESDHC1_DAT3 = IOMUX_PAD(0x004c, 0x004c, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
+ VF610_PAD_DDR_A15__DDR_A_15 = IOMUX_PAD(0x0220, 0x0220, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_A14__DDR_A_14 = IOMUX_PAD(0x0224, 0x0224, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_A13__DDR_A_13 = IOMUX_PAD(0x0228, 0x0228, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_A12__DDR_A_12 = IOMUX_PAD(0x022c, 0x022c, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_A11__DDR_A_11 = IOMUX_PAD(0x0230, 0x0230, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_A10__DDR_A_10 = IOMUX_PAD(0x0234, 0x0234, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_A9__DDR_A_9 = IOMUX_PAD(0x0238, 0x0238, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_A8__DDR_A_8 = IOMUX_PAD(0x023c, 0x023c, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_A7__DDR_A_7 = IOMUX_PAD(0x0240, 0x0240, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_A6__DDR_A_6 = IOMUX_PAD(0x0244, 0x0244, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_A5__DDR_A_5 = IOMUX_PAD(0x0248, 0x0248, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_A4__DDR_A_4 = IOMUX_PAD(0x024c, 0x024c, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_A3__DDR_A_3 = IOMUX_PAD(0x0250, 0x0250, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_A2__DDR_A_2 = IOMUX_PAD(0x0254, 0x0254, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_A1__DDR_A_1 = IOMUX_PAD(0x0258, 0x0258, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_BA2__DDR_BA_2 = IOMUX_PAD(0x0260, 0x0260, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_BA1__DDR_BA_1 = IOMUX_PAD(0x0264, 0x0264, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_BA0__DDR_BA_0 = IOMUX_PAD(0x0268, 0x0268, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_CAS__DDR_CAS_B = IOMUX_PAD(0x026c, 0x026c, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_CKE__DDR_CKE_0 = IOMUX_PAD(0x0270, 0x0270, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_CLK__DDR_CLK_0 = IOMUX_PAD(0x0274, 0x0274, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_CS__DDR_CS_B_0 = IOMUX_PAD(0x0278, 0x0278, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_D15__DDR_D_15 = IOMUX_PAD(0x027c, 0x027c, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_D14__DDR_D_14 = IOMUX_PAD(0x0280, 0x0280, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_D13__DDR_D_13 = IOMUX_PAD(0x0284, 0x0284, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_D12__DDR_D_12 = IOMUX_PAD(0x0288, 0x0288, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_D11__DDR_D_11 = IOMUX_PAD(0x028c, 0x028c, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_D10__DDR_D_10 = IOMUX_PAD(0x0290, 0x0290, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_D9__DDR_D_9 = IOMUX_PAD(0x0294, 0x0294, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_D8__DDR_D_8 = IOMUX_PAD(0x0298, 0x0298, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_D7__DDR_D_7 = IOMUX_PAD(0x029c, 0x029c, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_D6__DDR_D_6 = IOMUX_PAD(0x02a0, 0x02a0, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_D5__DDR_D_5 = IOMUX_PAD(0x02a4, 0x02a4, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_D4__DDR_D_4 = IOMUX_PAD(0x02a8, 0x02a8, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_D3__DDR_D_3 = IOMUX_PAD(0x02ac, 0x02ac, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_D2__DDR_D_2 = IOMUX_PAD(0x02b0, 0x02b0, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_D1__DDR_D_1 = IOMUX_PAD(0x02b4, 0x02b4, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_D0__DDR_D_0 = IOMUX_PAD(0x02b8, 0x02b8, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_DQM1__DDR_DQM_1 = IOMUX_PAD(0x02bc, 0x02bc, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_DQM0__DDR_DQM_0 = IOMUX_PAD(0x02c0, 0x02c0, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_DQS1__DDR_DQS_1 = IOMUX_PAD(0x02c4, 0x02c4, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_DQS0__DDR_DQS_0 = IOMUX_PAD(0x02c8, 0x02c8, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_RAS__DDR_RAS_B = IOMUX_PAD(0x02cc, 0x02cc, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_WE__DDR_WE_B = IOMUX_PAD(0x02d0, 0x02d0, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_ODT1__DDR_ODT_0 = IOMUX_PAD(0x02d4, 0x02d4, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+ VF610_PAD_DDR_ODT0__DDR_ODT_1 = IOMUX_PAD(0x02d8, 0x02d8, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+};
+
+#endif /* __IOMUX_VF610_H__ */
diff --git a/arch/arm/include/asm/arch-zynq/hardware.h b/arch/arm/include/asm/arch-zynq/hardware.h
index d0c69da..8b8a91a 100644
--- a/arch/arm/include/asm/arch-zynq/hardware.h
+++ b/arch/arm/include/asm/arch-zynq/hardware.h
@@ -23,16 +23,28 @@
#ifndef _ASM_ARCH_HARDWARE_H
#define _ASM_ARCH_HARDWARE_H
-#define XPSS_SYS_CTRL_BASEADDR 0xF8000000
-#define XPSS_DEV_CFG_APB_BASEADDR 0xF8007000
-#define XPSS_SCU_BASEADDR 0xF8F00000
+#define ZYNQ_SYS_CTRL_BASEADDR 0xF8000000
+#define ZYNQ_DEV_CFG_APB_BASEADDR 0xF8007000
+#define ZYNQ_SCU_BASEADDR 0xF8F00000
+#define ZYNQ_SCUTIMER_BASEADDR 0xF8F00600
+#define ZYNQ_GEM_BASEADDR0 0xE000B000
+#define ZYNQ_GEM_BASEADDR1 0xE000C000
+#define ZYNQ_SDHCI_BASEADDR0 0xE0100000
+#define ZYNQ_SDHCI_BASEADDR1 0xE0101000
+#define ZYNQ_I2C_BASEADDR0 0xE0004000
+#define ZYNQ_I2C_BASEADDR1 0xE0005000
/* Reflect slcr offsets */
struct slcr_regs {
u32 scl; /* 0x0 */
u32 slcr_lock; /* 0x4 */
u32 slcr_unlock; /* 0x8 */
- u32 reserved1[125];
+ u32 reserved0[75];
+ u32 gem0_rclk_ctrl; /* 0x138 */
+ u32 gem1_rclk_ctrl; /* 0x13c */
+ u32 gem0_clk_ctrl; /* 0x140 */
+ u32 gem1_clk_ctrl; /* 0x144 */
+ u32 reserved1[46];
u32 pss_rst_ctrl; /* 0x200 */
u32 reserved2[15];
u32 fpga_rst_ctrl; /* 0x240 */
@@ -41,15 +53,21 @@
u32 boot_mode; /* 0x25c */
u32 reserved4[116];
u32 trust_zone; /* 0x430 */ /* FIXME */
- u32 reserved5[115];
+ u32 reserved5_1[63];
+ u32 pss_idcode; /* 0x530 */
+ u32 reserved5_2[51];
u32 ddr_urgent; /* 0x600 */
u32 reserved6[6];
u32 ddr_urgent_sel; /* 0x61c */
- u32 reserved7[188];
+ u32 reserved7[56];
+ u32 mio_pin[54]; /* 0x700 - 0x7D4 */
+ u32 reserved8[74];
+ u32 lvl_shftr_en; /* 0x900 */
+ u32 reserved9[3];
u32 ocm_cfg; /* 0x910 */
};
-#define slcr_base ((struct slcr_regs *) XPSS_SYS_CTRL_BASEADDR)
+#define slcr_base ((struct slcr_regs *)ZYNQ_SYS_CTRL_BASEADDR)
struct devcfg_regs {
u32 ctrl; /* 0x0 */
@@ -72,7 +90,7 @@
u32 read_count; /* 0x8c */
};
-#define devcfg_base ((struct devcfg_regs *) XPSS_DEV_CFG_APB_BASEADDR)
+#define devcfg_base ((struct devcfg_regs *)ZYNQ_DEV_CFG_APB_BASEADDR)
struct scu_regs {
u32 reserved1[16];
@@ -80,6 +98,6 @@
u32 filter_end; /* 0x44 */
};
-#define scu_base ((struct scu_regs *) XPSS_SCU_BASEADDR)
+#define scu_base ((struct scu_regs *)ZYNQ_SCU_BASEADDR)
#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/include/asm/arch-zynq/sys_proto.h b/arch/arm/include/asm/arch-zynq/sys_proto.h
index e788900..2317121 100644
--- a/arch/arm/include/asm/arch-zynq/sys_proto.h
+++ b/arch/arm/include/asm/arch-zynq/sys_proto.h
@@ -26,5 +26,12 @@
extern void zynq_slcr_lock(void);
extern void zynq_slcr_unlock(void);
extern void zynq_slcr_cpu_reset(void);
+extern void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk);
+extern void zynq_slcr_devcfg_disable(void);
+extern void zynq_slcr_devcfg_enable(void);
+extern u32 zynq_slcr_get_idcode(void);
+
+/* Driver extern functions */
+extern int zynq_sdhci_init(u32 regbase);
#endif /* _SYS_PROTO_H_ */
diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h
index 5f11d7b..1b94a99 100644
--- a/arch/arm/include/asm/emif.h
+++ b/arch/arm/include/asm/emif.h
@@ -581,7 +581,7 @@
(0xFF << EMIF_SYS_ADDR_SHIFT))
#define EMIF_EXT_PHY_CTRL_TIMING_REG 0x5
-#define EMIF_EXT_PHY_CTRL_CONST_REG 0x13
+#define EMIF_EXT_PHY_CTRL_CONST_REG 0x14
/* Reg mapping structure */
struct emif_reg_struct {
@@ -855,13 +855,10 @@
#define DPD_ENABLE 1
/* Maximum delay before Low Power Modes */
-#ifndef CONFIG_OMAP54XX
-#define REG_CS_TIM 0xF
-#else
#define REG_CS_TIM 0x0
-#endif
-#define REG_SR_TIM 0xF
-#define REG_PD_TIM 0xF
+#define REG_SR_TIM 0x0
+#define REG_PD_TIM 0x0
+
/* EMIF_PWR_MGMT_CTRL register */
#define EMIF_PWR_MGMT_CTRL (\
@@ -1113,6 +1110,7 @@
u32 freq;
u32 sdram_config_init;
u32 sdram_config;
+ u32 sdram_config2;
u32 ref_ctrl;
u32 sdram_tim1;
u32 sdram_tim2;
diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h
index 37ac0da..7611d0a 100644
--- a/arch/arm/include/asm/global_data.h
+++ b/arch/arm/include/asm/global_data.h
@@ -24,6 +24,10 @@
#ifndef __ASM_GBL_DATA_H
#define __ASM_GBL_DATA_H
+#ifdef CONFIG_OMAP
+#include <asm/omap_boot.h>
+#endif
+
/* Architecture-specific global data */
struct arch_global_data {
#if defined(CONFIG_FSL_ESDHC)
@@ -51,6 +55,10 @@
unsigned long tlb_addr;
unsigned long tlb_size;
#endif
+
+#ifdef CONFIG_OMAP
+ struct omap_boot_parameters omap_boot_params;
+#endif
};
#include <asm-generic/global_data.h>
diff --git a/arch/arm/include/asm/arch-mxs/dma.h b/arch/arm/include/asm/imx-common/dma.h
similarity index 93%
rename from arch/arm/include/asm/arch-mxs/dma.h
rename to arch/arm/include/asm/imx-common/dma.h
index 1ac8696..cb74528 100644
--- a/arch/arm/include/asm/arch-mxs/dma.h
+++ b/arch/arm/include/asm/imx-common/dma.h
@@ -72,6 +72,18 @@
MXS_DMA_CHANNEL_AHB_APBH_RESERVED1,
MXS_MAX_DMA_CHANNELS,
};
+#elif defined(CONFIG_MX6)
+enum {
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI0 = 0,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI1,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI2,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI3,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI4,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI5,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI6,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI7,
+ MXS_MAX_DMA_CHANNELS,
+};
#endif
/*
diff --git a/arch/arm/include/asm/imx-common/imximage.cfg b/arch/arm/include/asm/imx-common/imximage.cfg
new file mode 100644
index 0000000..95daa3d
--- /dev/null
+++ b/arch/arm/include/asm/imx-common/imximage.cfg
@@ -0,0 +1,30 @@
+/*
+ * i.MX image header offset values
+ * Copyright (C) 2013 Marek Vasut <marex@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ */
+
+/*
+ * NOTE: This file must be kept in sync with tools/imximage.h because
+ * tools/imximage.c can not cross-include headers from arch/arm/
+ * and vice-versa.
+ */
+
+#ifndef __ASM_IMX_COMMON_IMXIMAGE_CFG__
+#define __ASM_IMX_COMMON_IMXIMAGE_CFG__
+
+/* Standard image header offset for NAND, SATA, SD, SPI flash. */
+#define FLASH_OFFSET_STANDARD 0x400
+/* Specific image header offset for booting from OneNAND. */
+#define FLASH_OFFSET_ONENAND 0x100
+/* Specific image header offset for booting from memory-mapped NOR. */
+#define FLASH_OFFSET_NOR 0x1000
+
+#endif /* __ASM_IMX_COMMON_IMXIMAGE_CFG__ */
diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h
index c34bb76..ebf54cf 100644
--- a/arch/arm/include/asm/imx-common/iomux-v3.h
+++ b/arch/arm/include/asm/imx-common/iomux-v3.h
@@ -23,6 +23,8 @@
#ifndef __MACH_IOMUX_V3_H__
#define __MACH_IOMUX_V3_H__
+#include <common.h>
+
/*
* build IOMUX_PAD structure
*
@@ -84,7 +86,86 @@
((iomux_v3_cfg_t)(sel_input_ofs) << MUX_SEL_INPUT_OFS_SHIFT)| \
((iomux_v3_cfg_t)(sel_input) << MUX_SEL_INPUT_SHIFT))
+#define NEW_PAD_CTRL(cfg, pad) (((cfg) & ~MUX_PAD_CTRL_MASK) | \
+ MUX_PAD_CTRL(pad))
+
+#define __NA_ 0x000
+#define NO_MUX_I 0
+#define NO_PAD_I 0
+
#define NO_PAD_CTRL (1 << 17)
+
+#ifdef CONFIG_MX6
+
+#define PAD_CTL_HYS (1 << 16)
+
+#define PAD_CTL_PUS_100K_DOWN (0 << 14 | PAD_CTL_PUE)
+#define PAD_CTL_PUS_47K_UP (1 << 14 | PAD_CTL_PUE)
+#define PAD_CTL_PUS_100K_UP (2 << 14 | PAD_CTL_PUE)
+#define PAD_CTL_PUS_22K_UP (3 << 14 | PAD_CTL_PUE)
+#define PAD_CTL_PUE (1 << 13 | PAD_CTL_PKE)
+#define PAD_CTL_PKE (1 << 12)
+
+#define PAD_CTL_ODE (1 << 11)
+
+#define PAD_CTL_SPEED_LOW (1 << 6)
+#define PAD_CTL_SPEED_MED (2 << 6)
+#define PAD_CTL_SPEED_HIGH (3 << 6)
+
+#define PAD_CTL_DSE_DISABLE (0 << 3)
+#define PAD_CTL_DSE_240ohm (1 << 3)
+#define PAD_CTL_DSE_120ohm (2 << 3)
+#define PAD_CTL_DSE_80ohm (3 << 3)
+#define PAD_CTL_DSE_60ohm (4 << 3)
+#define PAD_CTL_DSE_48ohm (5 << 3)
+#define PAD_CTL_DSE_40ohm (6 << 3)
+#define PAD_CTL_DSE_34ohm (7 << 3)
+
+#elif defined(CONFIG_VF610)
+
+#define PAD_MUX_MODE_SHIFT 20
+
+#define PAD_CTL_SPEED_MED (1 << 12)
+#define PAD_CTL_SPEED_HIGH (3 << 12)
+
+#define PAD_CTL_DSE_50ohm (3 << 6)
+#define PAD_CTL_DSE_25ohm (6 << 6)
+#define PAD_CTL_DSE_20ohm (7 << 6)
+
+#define PAD_CTL_PUS_47K_UP (1 << 4 | PAD_CTL_PUE)
+#define PAD_CTL_PUS_100K_UP (2 << 4 | PAD_CTL_PUE)
+#define PAD_CTL_PKE (1 << 3)
+#define PAD_CTL_PUE (1 << 2 | PAD_CTL_PKE)
+
+#define PAD_CTL_OBE_IBE_ENABLE (3 << 0)
+
+#else
+
+#define PAD_CTL_DVS (1 << 13)
+#define PAD_CTL_INPUT_DDR (1 << 9)
+#define PAD_CTL_HYS (1 << 8)
+
+#define PAD_CTL_PKE (1 << 7)
+#define PAD_CTL_PUE (1 << 6 | PAD_CTL_PKE)
+#define PAD_CTL_PUS_100K_DOWN (0 << 4 | PAD_CTL_PUE)
+#define PAD_CTL_PUS_47K_UP (1 << 4 | PAD_CTL_PUE)
+#define PAD_CTL_PUS_100K_UP (2 << 4 | PAD_CTL_PUE)
+#define PAD_CTL_PUS_22K_UP (3 << 4 | PAD_CTL_PUE)
+
+#define PAD_CTL_ODE (1 << 3)
+
+#define PAD_CTL_DSE_LOW (0 << 1)
+#define PAD_CTL_DSE_MED (1 << 1)
+#define PAD_CTL_DSE_HIGH (2 << 1)
+#define PAD_CTL_DSE_MAX (3 << 1)
+
+#endif
+
+#define PAD_CTL_SRE_SLOW (0 << 0)
+#define PAD_CTL_SRE_FAST (1 << 0)
+
+#define IOMUX_CONFIG_SION 0x10
+
#define GPIO_PIN_MASK 0x1f
#define GPIO_PORT_SHIFT 5
#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
@@ -95,10 +176,8 @@
#define GPIO_PORTE (4 << GPIO_PORT_SHIFT)
#define GPIO_PORTF (5 << GPIO_PORT_SHIFT)
-#define MUX_CONFIG_SION (0x1 << 4)
-
-int imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
-int imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,
+void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
+void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,
unsigned count);
#endif /* __MACH_IOMUX_V3_H__*/
diff --git a/arch/arm/include/asm/arch-mxs/regs-apbh.h b/arch/arm/include/asm/imx-common/regs-apbh.h
similarity index 96%
rename from arch/arm/include/asm/arch-mxs/regs-apbh.h
rename to arch/arm/include/asm/imx-common/regs-apbh.h
index fcef4b8..bcec6e0 100644
--- a/arch/arm/include/asm/arch-mxs/regs-apbh.h
+++ b/arch/arm/include/asm/imx-common/regs-apbh.h
@@ -26,7 +26,7 @@
#ifndef __REGS_APBH_H__
#define __REGS_APBH_H__
-#include <asm/arch/regs-common.h>
+#include <asm/imx-common/regs-common.h>
#ifndef __ASSEMBLY__
@@ -109,7 +109,7 @@
mxs_reg_32(hw_apbh_version)
};
-#elif defined(CONFIG_MX28)
+#elif (defined(CONFIG_MX28) || defined(CONFIG_MX6))
struct mxs_apbh_regs {
mxs_reg_32(hw_apbh_ctrl0)
mxs_reg_32(hw_apbh_ctrl1)
@@ -288,6 +288,17 @@
#define APBH_CTRL0_CLKGATE_CHANNEL_NAND7 0x0800
#define APBH_CTRL0_CLKGATE_CHANNEL_HSADC 0x1000
#define APBH_CTRL0_CLKGATE_CHANNEL_LCDIF 0x2000
+#elif defined(CONFIG_MX6)
+#define APBH_CTRL0_CLKGATE_CHANNEL_OFFSET 0
+#define APBH_CTRL0_CLKGATE_CHANNEL_NAND0 0x0001
+#define APBH_CTRL0_CLKGATE_CHANNEL_NAND1 0x0002
+#define APBH_CTRL0_CLKGATE_CHANNEL_NAND2 0x0004
+#define APBH_CTRL0_CLKGATE_CHANNEL_NAND3 0x0008
+#define APBH_CTRL0_CLKGATE_CHANNEL_NAND4 0x0010
+#define APBH_CTRL0_CLKGATE_CHANNEL_NAND5 0x0020
+#define APBH_CTRL0_CLKGATE_CHANNEL_NAND6 0x0040
+#define APBH_CTRL0_CLKGATE_CHANNEL_NAND7 0x0080
+#define APBH_CTRL0_CLKGATE_CHANNEL_SSP 0x0100
#endif
#define APBH_CTRL1_CH15_CMDCMPLT_IRQ_EN (1 << 31)
@@ -393,6 +404,10 @@
#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_LCDIF 0x2000
#endif
+#if defined(CONFIG_MX6)
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_OFFSET 16
+#endif
+
#if defined(CONFIG_MX23)
#define APBH_DEVSEL_CH7_MASK (0xf << 28)
#define APBH_DEVSEL_CH7_OFFSET 28
diff --git a/arch/arm/include/asm/arch-mxs/regs-bch.h b/arch/arm/include/asm/imx-common/regs-bch.h
similarity index 96%
rename from arch/arm/include/asm/arch-mxs/regs-bch.h
rename to arch/arm/include/asm/imx-common/regs-bch.h
index 40baa4d..dbe7ac8 100644
--- a/arch/arm/include/asm/arch-mxs/regs-bch.h
+++ b/arch/arm/include/asm/imx-common/regs-bch.h
@@ -26,7 +26,7 @@
#ifndef __MX28_REGS_BCH_H__
#define __MX28_REGS_BCH_H__
-#include <asm/arch/regs-common.h>
+#include <asm/imx-common/regs-common.h>
#ifndef __ASSEMBLY__
struct mxs_bch_regs {
@@ -136,8 +136,13 @@
#define BCH_FLASHLAYOUT0_NBLOCKS_OFFSET 24
#define BCH_FLASHLAYOUT0_META_SIZE_MASK (0xff << 16)
#define BCH_FLASHLAYOUT0_META_SIZE_OFFSET 16
+#if defined(CONFIG_MX6)
+#define BCH_FLASHLAYOUT0_ECC0_MASK (0x1f << 11)
+#define BCH_FLASHLAYOUT0_ECC0_OFFSET 11
+#else
#define BCH_FLASHLAYOUT0_ECC0_MASK (0xf << 12)
#define BCH_FLASHLAYOUT0_ECC0_OFFSET 12
+#endif
#define BCH_FLASHLAYOUT0_ECC0_NONE (0x0 << 12)
#define BCH_FLASHLAYOUT0_ECC0_ECC2 (0x1 << 12)
#define BCH_FLASHLAYOUT0_ECC0_ECC4 (0x2 << 12)
@@ -161,8 +166,13 @@
#define BCH_FLASHLAYOUT1_PAGE_SIZE_MASK (0xffff << 16)
#define BCH_FLASHLAYOUT1_PAGE_SIZE_OFFSET 16
+#if defined(CONFIG_MX6)
+#define BCH_FLASHLAYOUT1_ECCN_MASK (0x1f << 11)
+#define BCH_FLASHLAYOUT1_ECCN_OFFSET 11
+#else
#define BCH_FLASHLAYOUT1_ECCN_MASK (0xf << 12)
#define BCH_FLASHLAYOUT1_ECCN_OFFSET 12
+#endif
#define BCH_FLASHLAYOUT1_ECCN_NONE (0x0 << 12)
#define BCH_FLASHLAYOUT1_ECCN_ECC2 (0x1 << 12)
#define BCH_FLASHLAYOUT1_ECCN_ECC4 (0x2 << 12)
diff --git a/arch/arm/include/asm/arch-mxs/regs-common.h b/arch/arm/include/asm/imx-common/regs-common.h
similarity index 100%
rename from arch/arm/include/asm/arch-mxs/regs-common.h
rename to arch/arm/include/asm/imx-common/regs-common.h
diff --git a/arch/arm/include/asm/arch-mxs/regs-gpmi.h b/arch/arm/include/asm/imx-common/regs-gpmi.h
similarity index 99%
rename from arch/arm/include/asm/arch-mxs/regs-gpmi.h
rename to arch/arm/include/asm/imx-common/regs-gpmi.h
index 624d618..3409b94 100644
--- a/arch/arm/include/asm/arch-mxs/regs-gpmi.h
+++ b/arch/arm/include/asm/imx-common/regs-gpmi.h
@@ -26,7 +26,7 @@
#ifndef __MX28_REGS_GPMI_H__
#define __MX28_REGS_GPMI_H__
-#include <asm/arch/regs-common.h>
+#include <asm/imx-common/regs-common.h>
#ifndef __ASSEMBLY__
struct mxs_gpmi_regs {
diff --git a/arch/arm/include/asm/omap_boot.h b/arch/arm/include/asm/omap_boot.h
new file mode 100644
index 0000000..a803965
--- /dev/null
+++ b/arch/arm/include/asm/omap_boot.h
@@ -0,0 +1,50 @@
+/*
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * Sricharan R <r.sricharan@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* ROM code defines */
+/* Boot device */
+#define BOOT_DEVICE_MASK 0xFF
+#define BOOT_DEVICE_OFFSET 0x8
+#define DEV_DESC_PTR_OFFSET 0x4
+#define DEV_DATA_PTR_OFFSET 0x18
+#define BOOT_MODE_OFFSET 0x8
+#define RESET_REASON_OFFSET 0x9
+#define CH_FLAGS_OFFSET 0xA
+
+#define CH_FLAGS_CHSETTINGS (0x1 << 0)
+#define CH_FLAGS_CHRAM (0x1 << 1)
+#define CH_FLAGS_CHFLASH (0x1 << 2)
+#define CH_FLAGS_CHMMCSD (0x1 << 3)
+
+#ifndef __ASSEMBLY__
+struct omap_boot_parameters {
+ char *boot_message;
+ unsigned int mem_boot_descriptor;
+ unsigned char omap_bootdevice;
+ unsigned char reset_reason;
+ unsigned char ch_flags;
+ unsigned long omap_bootmode;
+};
+#endif
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 091ddb5..0dbe81b 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -25,9 +25,11 @@
#ifndef _OMAP_COMMON_H_
#define _OMAP_COMMON_H_
+#ifndef __ASSEMBLY__
+
#include <common.h>
-#define NUM_SYS_CLKS 8
+#define NUM_SYS_CLKS 7
struct prcm_regs {
/* cm1.ckgen */
@@ -240,6 +242,8 @@
u32 cm_l3init_fsusb_clkctrl;
u32 cm_l3init_ocp2scp1_clkctrl;
+ u32 prm_irqstatus_mpu_2;
+
/* cm2.l4per */
u32 cm_l4per_clkstctrl;
u32 cm_l4per_dynamicdep;
@@ -299,6 +303,7 @@
/* l4 wkup regs */
u32 cm_abe_pll_ref_clksel;
u32 cm_sys_clksel;
+ u32 cm_abe_pll_sys_clksel;
u32 cm_wkup_clkstctrl;
u32 cm_wkup_l4wkup_clkctrl;
u32 cm_wkup_wdtimer1_clkctrl;
@@ -316,6 +321,7 @@
u32 cm_wkupaon_io_srcomp_clkctrl;
u32 prm_rstctrl;
u32 prm_rstst;
+ u32 prm_rsttime;
u32 prm_vc_val_bypass;
u32 prm_vc_cfg_i2c_mode;
u32 prm_vc_cfg_i2c_clk;
@@ -325,6 +331,8 @@
u32 prm_sldo_mpu_ctrl;
u32 prm_sldo_mm_setup;
u32 prm_sldo_mm_ctrl;
+ u32 prm_abbldo_mpu_setup;
+ u32 prm_abbldo_mpu_ctrl;
u32 cm_div_m4_dpll_core;
u32 cm_div_m5_dpll_core;
@@ -343,10 +351,15 @@
u32 cm_l3init_usbphy_clkctrl;
u32 cm_l4per_mcbsp4_clkctrl;
u32 prm_vc_cfg_channel;
+
+ /* SCRM stuff, used by some boards */
+ u32 scrm_auxclk0;
+ u32 scrm_auxclk1;
};
struct omap_sys_ctrl_regs {
u32 control_status;
+ u32 control_std_fuse_opp_vdd_mpu_2;
u32 control_core_mmr_lock1;
u32 control_core_mmr_lock2;
u32 control_core_mmr_lock3;
@@ -359,6 +372,7 @@
u32 control_ldosram_iva_voltage_ctrl;
u32 control_ldosram_mpu_voltage_ctrl;
u32 control_ldosram_core_voltage_ctrl;
+ u32 control_usbotghs_ctrl;
u32 control_padconf_core_base;
u32 control_paconf_global;
u32 control_paconf_mode;
@@ -391,6 +405,7 @@
u32 control_ddrio_0;
u32 control_ddrio_1;
u32 control_ddrio_2;
+ u32 control_ddr_control_ext_0;
u32 control_lpddr2io1_0;
u32 control_lpddr2io1_1;
u32 control_lpddr2io1_2;
@@ -416,6 +431,7 @@
u32 control_port_emif2_sdram_config;
u32 control_emif1_sdram_config_ext;
u32 control_emif2_sdram_config_ext;
+ u32 control_wkup_ldovbb_mpu_voltage_ctrl;
u32 control_smart1nopmio_padconf_0;
u32 control_smart1nopmio_padconf_1;
u32 control_padconf_mode;
@@ -491,11 +507,25 @@
u32 start_code;
unsigned gpio;
int gpio_en;
+ u32 i2c_slave_addr;
+ void (*pmic_bus_init)(void);
+ int (*pmic_write)(u8 sa, u8 reg_addr, u8 reg_data);
+};
+
+/**
+ * struct volts_efuse_data - efuse definition for voltage
+ * @reg: register address for efuse
+ * @reg_bits: Number of bits in a register address, mandatory.
+ */
+struct volts_efuse_data {
+ u32 reg;
+ u8 reg_bits;
};
struct volts {
u32 value;
u32 addr;
+ struct volts_efuse_data efuse;
struct pmic_data *pmic;
};
@@ -503,6 +533,9 @@
struct volts mpu;
struct volts core;
struct volts mm;
+ struct volts gpu;
+ struct volts eve;
+ struct volts iva;
};
extern struct prcm_regs const **prcm;
@@ -542,9 +575,9 @@
void scale_vcores(struct vcores_data const *);
u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic);
void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic);
-
-/* Max value for DPLL multiplier M */
-#define OMAP_DPLL_MAX_N 127
+void abb_setup(u32 fuse, u32 ldovbb, u32 setup, u32 control,
+ u32 txdone, u32 txdone_mask, u32 opp);
+s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb);
/* HW Init Context */
#define OMAP_INIT_CONTEXT_SPL 0
@@ -552,12 +585,34 @@
#define OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL 2
#define OMAP_INIT_CONTEXT_UBOOT_AFTER_CH 3
+/* ABB */
+#define OMAP_ABB_NOMINAL_OPP 0
+#define OMAP_ABB_FAST_OPP 1
+#define OMAP_ABB_SLOW_OPP 3
+#define OMAP_ABB_CONTROL_FAST_OPP_SEL_MASK (0x1 << 0)
+#define OMAP_ABB_CONTROL_SLOW_OPP_SEL_MASK (0x1 << 1)
+#define OMAP_ABB_CONTROL_OPP_CHANGE_MASK (0x1 << 2)
+#define OMAP_ABB_CONTROL_SR2_IN_TRANSITION_MASK (0x1 << 6)
+#define OMAP_ABB_SETUP_SR2EN_MASK (0x1 << 0)
+#define OMAP_ABB_SETUP_ACTIVE_FBB_SEL_MASK (0x1 << 2)
+#define OMAP_ABB_SETUP_ACTIVE_RBB_SEL_MASK (0x1 << 1)
+#define OMAP_ABB_SETUP_SR2_WTCNT_VALUE_MASK (0xff << 8)
+
static inline u32 omap_revision(void)
{
extern u32 *const omap_si_rev;
return *omap_si_rev;
}
+#define OMAP54xx 0x54000000
+
+static inline u8 is_omap54xx(void)
+{
+ extern u32 *const omap_si_rev;
+ return ((*omap_si_rev & 0xFF000000) == OMAP54xx);
+}
+#endif
+
/*
* silicon revisions.
* Moving this to common, so that most of code can be moved to common,
@@ -583,4 +638,19 @@
/* DRA7XX */
#define DRA752_ES1_0 0x07520100
+
+/*
+ * SRAM scratch space entries
+ */
+#define OMAP_SRAM_SCRATCH_OMAP_REV SRAM_SCRATCH_SPACE_ADDR
+#define OMAP_SRAM_SCRATCH_EMIF_SIZE (SRAM_SCRATCH_SPACE_ADDR + 0x4)
+#define OMAP_SRAM_SCRATCH_EMIF_T_NUM (SRAM_SCRATCH_SPACE_ADDR + 0xC)
+#define OMAP_SRAM_SCRATCH_EMIF_T_DEN (SRAM_SCRATCH_SPACE_ADDR + 0x10)
+#define OMAP_SRAM_SCRATCH_PRCM_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x14)
+#define OMAP_SRAM_SCRATCH_DPLLS_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x18)
+#define OMAP_SRAM_SCRATCH_VCORES_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x1C)
+#define OMAP_SRAM_SCRATCH_SYS_CTRL (SRAM_SCRATCH_SPACE_ADDR + 0x20)
+#define OMAP_SRAM_SCRATCH_BOOT_PARAMS (SRAM_SCRATCH_SPACE_ADDR + 0x24)
+#define OMAP5_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x28)
+
#endif /* _OMAP_COMMON_H_ */
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 5b2cb61..8ad9f66 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -39,6 +39,7 @@
SOBJS-y += crt0.o
ifndef CONFIG_SPL_BUILD
+SOBJS-y += relocate.o
ifndef CONFIG_SYS_GENERIC_BOARD
COBJS-y += board.o
endif
diff --git a/arch/arm/lib/cache.c b/arch/arm/lib/cache.c
index b545fb7..8b1c8ed 100644
--- a/arch/arm/lib/cache.c
+++ b/arch/arm/lib/cache.c
@@ -27,7 +27,7 @@
void __flush_cache(unsigned long start, unsigned long size)
{
-#if defined(CONFIG_OMAP2420) || defined(CONFIG_ARM1136)
+#if defined(CONFIG_ARM1136)
void arm1136_cache_flush(void);
arm1136_cache_flush();
diff --git a/arch/arm/lib/crt0.S b/arch/arm/lib/crt0.S
index a9657d1..a5bffb8 100644
--- a/arch/arm/lib/crt0.S
+++ b/arch/arm/lib/crt0.S
@@ -97,13 +97,13 @@
* 'here' but relocated.
*/
- ldr sp, [r8, #GD_START_ADDR_SP] /* r8 = gd->start_addr_sp */
+ ldr sp, [r8, #GD_START_ADDR_SP] /* sp = gd->start_addr_sp */
bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
ldr r8, [r8, #GD_BD] /* r8 = gd->bd */
sub r8, r8, #GD_SIZE /* new GD is below bd */
adr lr, here
- ldr r0, [r8, #GD_RELOC_OFF] /* lr = gd->start_addr_sp */
+ ldr r0, [r8, #GD_RELOC_OFF] /* r0 = gd->reloc_off */
add lr, lr, r0
ldr r0, [r8, #GD_RELOCADDR] /* r0 = gd->relocaddr */
b relocate_code
diff --git a/arch/arm/lib/relocate.S b/arch/arm/lib/relocate.S
new file mode 100644
index 0000000..4446da9
--- /dev/null
+++ b/arch/arm/lib/relocate.S
@@ -0,0 +1,112 @@
+/*
+ * relocate - common relocation function for ARM U-Boot
+ *
+ * Copyright (c) 2013 Albert ARIBAUD <albert.u.boot@aribaud.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <linux/linkage.h>
+
+/*
+ * void relocate_code(addr_moni)
+ *
+ * This function relocates the monitor code.
+ *
+ * NOTE:
+ * To prevent the code below from containing references with an R_ARM_ABS32
+ * relocation record type, we never refer to linker-defined symbols directly.
+ * Instead, we declare literals which contain their relative location with
+ * respect to relocate_code, and at run time, add relocate_code back to them.
+ */
+
+ENTRY(relocate_code)
+ mov r6, r0 /* save addr of destination */
+
+ ldr r0, =_start /* r0 <- SRC &_start */
+ subs r9, r6, r0 /* r9 <- relocation offset */
+ beq relocate_done /* skip relocation */
+ mov r1, r6 /* r1 <- scratch for copy loop */
+ adr r7, relocate_code /* r7 <- SRC &relocate_code */
+ ldr r3, _image_copy_end_ofs /* r3 <- __image_copy_end local ofs */
+ add r2, r7, r3 /* r2 <- SRC &__image_copy_end */
+
+copy_loop:
+ ldmia r0!, {r10-r11} /* copy from source address [r0] */
+ stmia r1!, {r10-r11} /* copy to target address [r1] */
+ cmp r0, r2 /* until source end address [r2] */
+ blo copy_loop
+
+ /*
+ * fix .rel.dyn relocations
+ */
+ ldr r10, _dynsym_start_ofs /* r10 <- __dynsym_start local ofs */
+ add r10, r10, r7 /* r10 <- SRC &__dynsym_start */
+ ldr r2, _rel_dyn_start_ofs /* r2 <- __rel_dyn_start local ofs */
+ add r2, r2, r7 /* r2 <- SRC &__rel_dyn_start */
+ ldr r3, _rel_dyn_end_ofs /* r3 <- __rel_dyn_end local ofs */
+ add r3, r3, r7 /* r3 <- SRC &__rel_dyn_end */
+fixloop:
+ ldr r0, [r2] /* r0 <- SRC location to fix up */
+ add r0, r0, r9 /* r0 <- DST location to fix up */
+ ldr r1, [r2, #4]
+ and r7, r1, #0xff
+ cmp r7, #23 /* relative fixup? */
+ beq fixrel
+ cmp r7, #2 /* absolute fixup? */
+ beq fixabs
+ /* ignore unknown type of fixup */
+ b fixnext
+fixabs:
+ /* absolute fix: set location to (offset) symbol value */
+ mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
+ add r1, r10, r1 /* r1 <- address of symbol in table */
+ ldr r1, [r1, #4] /* r1 <- symbol value */
+ add r1, r1, r9 /* r1 <- relocated sym addr */
+ b fixnext
+fixrel:
+ /* relative fix: increase location by offset */
+ ldr r1, [r0]
+ add r1, r1, r9
+fixnext:
+ str r1, [r0]
+ add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
+ cmp r2, r3
+ blo fixloop
+
+relocate_done:
+
+ /* ARMv4- don't know bx lr but the assembler fails to see that */
+
+#ifdef __ARM_ARCH_4__
+ mov pc, lr
+#else
+ bx lr
+#endif
+
+_image_copy_end_ofs:
+ .word __image_copy_end - relocate_code
+_rel_dyn_start_ofs:
+ .word __rel_dyn_start - relocate_code
+_rel_dyn_end_ofs:
+ .word __rel_dyn_end - relocate_code
+_dynsym_start_ofs:
+ .word __dynsym_start - relocate_code
+
+ENDPROC(relocate_code)
diff --git a/arch/mips/include/asm/errno.h b/arch/mips/include/asm/errno.h
index 1665a63..4c82b50 100644
--- a/arch/mips/include/asm/errno.h
+++ b/arch/mips/include/asm/errno.h
@@ -1,143 +1 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995, 1999, 2001, 2002 by Ralf Baechle
- */
-#ifndef _ASM_MIPS_ERRNO_H
-#define _ASM_MIPS_ERRNO_H
-
-/*
- * These first 34 error codes are from Linux 2.6, <asm-generic/errno-base.h>
- */
-#define EPERM 1 /* Operation not permitted */
-#define ENOENT 2 /* No such file or directory */
-#define ESRCH 3 /* No such process */
-#define EINTR 4 /* Interrupted system call */
-#define EIO 5 /* I/O error */
-#define ENXIO 6 /* No such device or address */
-#define E2BIG 7 /* Argument list too long */
-#define ENOEXEC 8 /* Exec format error */
-#define EBADF 9 /* Bad file number */
-#define ECHILD 10 /* No child processes */
-#define EAGAIN 11 /* Try again */
-#define ENOMEM 12 /* Out of memory */
-#define EACCES 13 /* Permission denied */
-#define EFAULT 14 /* Bad address */
-#define ENOTBLK 15 /* Block device required */
-#define EBUSY 16 /* Device or resource busy */
-#define EEXIST 17 /* File exists */
-#define EXDEV 18 /* Cross-device link */
-#define ENODEV 19 /* No such device */
-#define ENOTDIR 20 /* Not a directory */
-#define EISDIR 21 /* Is a directory */
-#define EINVAL 22 /* Invalid argument */
-#define ENFILE 23 /* File table overflow */
-#define EMFILE 24 /* Too many open files */
-#define ENOTTY 25 /* Not a typewriter */
-#define ETXTBSY 26 /* Text file busy */
-#define EFBIG 27 /* File too large */
-#define ENOSPC 28 /* No space left on device */
-#define ESPIPE 29 /* Illegal seek */
-#define EROFS 30 /* Read-only file system */
-#define EMLINK 31 /* Too many links */
-#define EPIPE 32 /* Broken pipe */
-#define EDOM 33 /* Math argument out of domain of func */
-#define ERANGE 34 /* Math result not representable */
-
-/*
- * These error numbers are intended to be MIPS ABI compatible
- */
-#define ENOMSG 35 /* No message of desired type */
-#define EIDRM 36 /* Identifier removed */
-#define ECHRNG 37 /* Channel number out of range */
-#define EL2NSYNC 38 /* Level 2 not synchronized */
-#define EL3HLT 39 /* Level 3 halted */
-#define EL3RST 40 /* Level 3 reset */
-#define ELNRNG 41 /* Link number out of range */
-#define EUNATCH 42 /* Protocol driver not attached */
-#define ENOCSI 43 /* No CSI structure available */
-#define EL2HLT 44 /* Level 2 halted */
-#define EDEADLK 45 /* Resource deadlock would occur */
-#define ENOLCK 46 /* No record locks available */
-#define EBADE 50 /* Invalid exchange */
-#define EBADR 51 /* Invalid request descriptor */
-#define EXFULL 52 /* Exchange full */
-#define ENOANO 53 /* No anode */
-#define EBADRQC 54 /* Invalid request code */
-#define EBADSLT 55 /* Invalid slot */
-#define EDEADLOCK 56 /* File locking deadlock error */
-#define EBFONT 59 /* Bad font file format */
-#define ENOSTR 60 /* Device not a stream */
-#define ENODATA 61 /* No data available */
-#define ETIME 62 /* Timer expired */
-#define ENOSR 63 /* Out of streams resources */
-#define ENONET 64 /* Machine is not on the network */
-#define ENOPKG 65 /* Package not installed */
-#define EREMOTE 66 /* Object is remote */
-#define ENOLINK 67 /* Link has been severed */
-#define EADV 68 /* Advertise error */
-#define ESRMNT 69 /* Srmount error */
-#define ECOMM 70 /* Communication error on send */
-#define EPROTO 71 /* Protocol error */
-#define EDOTDOT 73 /* RFS specific error */
-#define EMULTIHOP 74 /* Multihop attempted */
-#define EBADMSG 77 /* Not a data message */
-#define ENAMETOOLONG 78 /* File name too long */
-#define EOVERFLOW 79 /* Value too large for defined data type */
-#define ENOTUNIQ 80 /* Name not unique on network */
-#define EBADFD 81 /* File descriptor in bad state */
-#define EREMCHG 82 /* Remote address changed */
-#define ELIBACC 83 /* Can not access a needed shared library */
-#define ELIBBAD 84 /* Accessing a corrupted shared library */
-#define ELIBSCN 85 /* .lib section in a.out corrupted */
-#define ELIBMAX 86 /* Attempting to link in too many shared libraries */
-#define ELIBEXEC 87 /* Cannot exec a shared library directly */
-#define EILSEQ 88 /* Illegal byte sequence */
-#define ENOSYS 89 /* Function not implemented */
-#define ELOOP 90 /* Too many symbolic links encountered */
-#define ERESTART 91 /* Interrupted system call should be restarted */
-#define ESTRPIPE 92 /* Streams pipe error */
-#define ENOTEMPTY 93 /* Directory not empty */
-#define EUSERS 94 /* Too many users */
-#define ENOTSOCK 95 /* Socket operation on non-socket */
-#define EDESTADDRREQ 96 /* Destination address required */
-#define EMSGSIZE 97 /* Message too long */
-#define EPROTOTYPE 98 /* Protocol wrong type for socket */
-#define ENOPROTOOPT 99 /* Protocol not available */
-#define EPROTONOSUPPORT 120 /* Protocol not supported */
-#define ESOCKTNOSUPPORT 121 /* Socket type not supported */
-#define EOPNOTSUPP 122 /* Operation not supported on transport endpoint */
-#define EPFNOSUPPORT 123 /* Protocol family not supported */
-#define EAFNOSUPPORT 124 /* Address family not supported by protocol */
-#define EADDRINUSE 125 /* Address already in use */
-#define EADDRNOTAVAIL 126 /* Cannot assign requested address */
-#define ENETDOWN 127 /* Network is down */
-#define ENETUNREACH 128 /* Network is unreachable */
-#define ENETRESET 129 /* Network dropped connection because of reset */
-#define ECONNABORTED 130 /* Software caused connection abort */
-#define ECONNRESET 131 /* Connection reset by peer */
-#define ENOBUFS 132 /* No buffer space available */
-#define EISCONN 133 /* Transport endpoint is already connected */
-#define ENOTCONN 134 /* Transport endpoint is not connected */
-#define EUCLEAN 135 /* Structure needs cleaning */
-#define ENOTNAM 137 /* Not a XENIX named type file */
-#define ENAVAIL 138 /* No XENIX semaphores available */
-#define EISNAM 139 /* Is a named type file */
-#define EREMOTEIO 140 /* Remote I/O error */
-#define EINIT 141 /* Reserved */
-#define EREMDEV 142 /* Error 142 */
-#define ESHUTDOWN 143 /* Cannot send after transport endpoint shutdown */
-#define ETOOMANYREFS 144 /* Too many references: cannot splice */
-#define ETIMEDOUT 145 /* Connection timed out */
-#define ECONNREFUSED 146 /* Connection refused */
-#define EHOSTDOWN 147 /* Host is down */
-#define EHOSTUNREACH 148 /* No route to host */
-#define EWOULDBLOCK EAGAIN /* Operation would block */
-#define EALREADY 149 /* Operation already in progress */
-#define EINPROGRESS 150 /* Operation now in progress */
-#define ESTALE 151 /* Stale NFS file handle */
-#define ECANCELED 158 /* AIO operation canceled */
-
-#endif /* _ASM_MIPS_ERRNO_H */
+#include <asm-generic/errno.h>
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index 3864c80..50a882c 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -184,19 +184,19 @@
* 24-31 on SNI.
* XXX more SNI hacks.
*/
-#define readb(addr) (*(volatile unsigned char *)(addr))
-#define readw(addr) __ioswab16((*(volatile unsigned short *)(addr)))
-#define readl(addr) __ioswab32((*(volatile unsigned int *)(addr)))
-#define __raw_readb readb
-#define __raw_readw readw
-#define __raw_readl readl
+#define __raw_readb(addr) (*(volatile unsigned char *)(addr))
+#define __raw_readw(addr) (*(volatile unsigned short *)(addr))
+#define __raw_readl(addr) (*(volatile unsigned int *)(addr))
+#define readb(addr) __raw_readb((addr))
+#define readw(addr) __ioswab16(__raw_readw((addr)))
+#define readl(addr) __ioswab32(__raw_readl((addr)))
-#define writeb(b,addr) (*(volatile unsigned char *)(addr)) = (b)
-#define writew(b,addr) (*(volatile unsigned short *)(addr)) = (__ioswab16(b))
-#define writel(b,addr) (*(volatile unsigned int *)(addr)) = (__ioswab32(b))
-#define __raw_writeb writeb
-#define __raw_writew writew
-#define __raw_writel writel
+#define __raw_writeb(b, addr) (*(volatile unsigned char *)(addr)) = (b)
+#define __raw_writew(b, addr) (*(volatile unsigned short *)(addr)) = (b)
+#define __raw_writel(b, addr) (*(volatile unsigned int *)(addr)) = (b)
+#define writeb(b, addr) __raw_writeb((b), (addr))
+#define writew(b, addr) __raw_writew(__ioswab16(b), (addr))
+#define writel(b, addr) __raw_writel(__ioswab32(b), (addr))
#define memset_io(a,b,c) memset((void *)(a),(b),(c))
#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c))
diff --git a/arch/powerpc/cpu/mpc512x/Makefile b/arch/powerpc/cpu/mpc512x/Makefile
index b53232f..4f4c9ec 100644
--- a/arch/powerpc/cpu/mpc512x/Makefile
+++ b/arch/powerpc/cpu/mpc512x/Makefile
@@ -38,7 +38,6 @@
COBJS-y += speed.o
COBJS-$(CONFIG_FSL_DIU_FB) += diu.o
COBJS-$(CONFIG_CMD_IDE) += ide.o
-COBJS-$(CONFIG_IIM) += iim.o
COBJS-$(CONFIG_PCI) += pci.o
# Stub implementations of cache management functions for USB
diff --git a/arch/powerpc/cpu/mpc512x/cpu_init.c b/arch/powerpc/cpu/mpc512x/cpu_init.c
index b308cb4..0e20ded 100644
--- a/arch/powerpc/cpu/mpc512x/cpu_init.c
+++ b/arch/powerpc/cpu/mpc512x/cpu_init.c
@@ -201,7 +201,7 @@
*/
out_be32(&im->clk.sccr[0], SCCR1_CLOCKS_EN);
out_be32(&im->clk.sccr[1], SCCR2_CLOCKS_EN);
-#if defined(CONFIG_IIM) || defined(CONFIG_CMD_FUSE)
+#if defined(CONFIG_FSL_IIM) || defined(CONFIG_CMD_FUSE)
setbits_be32(&im->clk.sccr[1], CLOCK_SCCR2_IIM_EN);
#endif
}
diff --git a/arch/powerpc/cpu/mpc512x/iim.c b/arch/powerpc/cpu/mpc512x/iim.c
deleted file mode 100644
index abec8f6..0000000
--- a/arch/powerpc/cpu/mpc512x/iim.c
+++ /dev/null
@@ -1,394 +0,0 @@
-/*
- * Copyright 2008 Silicon Turnkey Express, Inc.
- * Martha Marx <mmarx@silicontkx.com>
- *
- * ADS5121 IIM (Fusebox) Interface
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/io.h>
-
-#ifdef CONFIG_CMD_FUSE
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static char cur_bank = '1';
-
-char *iim_err_msg(u32 err)
-{
- static char *IIM_errs[] = {
- "Parity Error in cache",
- "Explicit Sense Cycle Error",
- "Write to Locked Register Error",
- "Read Protect Error",
- "Override Protect Error",
- "Write Protect Error"};
-
- int i;
-
- if (!err)
- return "";
- for (i = 1; i < 8; i++)
- if (err & (1 << i))
- printf("IIM - %s\n", IIM_errs[i-1]);
- return "";
-}
-
-int in_range(int n, int min, int max, char *err, char *usg)
-{
- if (n > max || n < min) {
- printf(err);
- printf("Usage:\n%s\n", usg);
- return 0;
- }
- return 1;
-}
-
-int ads5121_fuse_read(int bank, int fstart, int num)
-{
- iim512x_t *iim = &((immap_t *) CONFIG_SYS_IMMR)->iim;
- u32 *iim_fb, dummy;
- int f, ctr;
-
- out_be32(&iim->err, in_be32(&iim->err));
- if (bank == 0)
- iim_fb = (u32 *)&(iim->fbac0);
- else
- iim_fb = (u32 *)&(iim->fbac1);
-/* try a read to see if Read Protect is set */
- dummy = in_be32(&iim_fb[0]);
- if (in_be32(&iim->err) & IIM_ERR_RPE) {
- printf("\tRead protect fuse is set\n");
- out_be32(&iim->err, IIM_ERR_RPE);
- return 0;
- }
- printf("Reading Bank %d cache\n", bank);
- for (f = fstart, ctr = 0; num > 0; ctr++, num--, f++) {
- if (ctr % 4 == 0)
- printf("F%2d:", f);
- printf("\t%#04x", (u8)(iim_fb[f]));
- if (ctr % 4 == 3)
- printf("\n");
- }
- if (ctr % 4 != 0)
- printf("\n");
-}
-
-int ads5121_fuse_override(int bank, int f, u8 val)
-{
- iim512x_t *iim = &((immap_t *) CONFIG_SYS_IMMR)->iim;
- u32 *iim_fb;
- u32 iim_stat;
- int i;
-
- out_be32(&iim->err, in_be32(&iim->err));
- if (bank == 0)
- iim_fb = (u32 *)&(iim->fbac0);
- else
- iim_fb = (u32 *)&(iim->fbac1);
-/* try a read to see if Read Protect is set */
- iim_stat = in_be32(&iim_fb[0]);
- if (in_be32(&iim->err) & IIM_ERR_RPE) {
- printf("Read protect fuse is set on bank %d;"
- "Override protect may also be set\n", bank);
- printf("An attempt will be made to override\n");
- out_be32(&iim->err, IIM_ERR_RPE);
- }
- if (iim_stat & IIM_FBAC_FBOP) {
- printf("Override protect fuse is set on bank %d\n", bank);
- return 1;
- }
- if (f > IIM_FMAX) /* reset the entire bank */
- for (i = 0; i < IIM_FMAX + 1; i++)
- out_be32(&iim_fb[i], 0);
- else
- out_be32(&iim_fb[f], val);
- return 0;
-}
-
-int ads5121_fuse_prog(cmd_tbl_t *cmdtp, int bank, char *fuseno_bitno)
-{
- iim512x_t *iim = &((immap_t *) CONFIG_SYS_IMMR)->iim;
- int f, i, bitno;
- u32 stat, err;
-
- f = simple_strtol(fuseno_bitno, NULL, 10);
- if (f == 0 && fuseno_bitno[0] != '0')
- f = -1;
- if (!in_range(f, 0, IIM_FMAX,
- "<frow> must be between 0-31\n\n", cmdtp->usage))
- return 1;
- bitno = -1;
- for (i = 0; i < 6; i++) {
- if (fuseno_bitno[i] == '_') {
- bitno = simple_strtol(&(fuseno_bitno[i+1]), NULL, 10);
- if (bitno == 0 && fuseno_bitno[i+1] != '0')
- bitno = -1;
- break;
- }
- }
- if (!in_range(bitno, 0, 7, "Bit number ranges from 0-7\n"
- "Example of <frow_bitno>: \"18_4\" sets bit 4 of row 18\n",
- cmdtp->usage))
- return 1;
- out_be32(&iim->err, in_be32(&iim->err));
- out_be32(&iim->prg_p, IIM_PRG_P_SET);
- out_be32(&iim->ua, IIM_SET_UA(bank, f));
- out_be32(&iim->la, IIM_SET_LA(f, bitno));
-#ifdef DEBUG
- printf("Programming disabled with DEBUG defined \n");
- printf(""Set up to pro
- printf("iim.ua = %x; iim.la = %x\n", iim->ua, iim->la);
-#else
- out_be32(&iim->fctl, IIM_FCTL_PROG_PULSE | IIM_FCTL_PROG);
- do
- udelay(20);
- while ((stat = in_be32(&iim->stat)) & IIM_STAT_BUSY);
- out_be32(&iim->prg_p, 0);
- err = in_be32(&iim->err);
- if (stat & IIM_STAT_PRGD) {
- if (!(err & (IIM_ERR_WPE | IIM_ERR_WPE))) {
- printf("Fuse is successfully set");
- if (err)
- printf(" - however there are other errors");
- printf("\n");
- }
- iim->stat = 0;
- }
- if (err) {
- iim_err_msg(err);
- out_be32(&iim->err, in_be32(&iim->err));
- }
-#endif
-}
-
-int ads5121_fuse_sense(int bank, int fstart, int num)
-{
- iim512x_t *iim = &((immap_t *) CONFIG_SYS_IMMR)->iim;
- u32 iim_fbac;
- u32 stat, err, err_hold = 0;
- int f, ctr;
-
- out_be32(&iim->err, in_be32(&iim->err));
- if (bank == 0)
- iim_fbac = in_be32(&iim->fbac0);
- else
- iim_fbac = in_be32(&iim->fbac1);
- if (iim_fbac & IIM_FBAC_FBESP) {
- printf("\tSense Protect disallows this operation\n");
- out_be32(&iim->err, IIM_FBAC_FBESP);
- return 1;
- }
- err = in_be32(&iim->err);
- if (err) {
- iim_err_msg(err);
- err_hold |= err;
- }
- if (err & IIM_ERR_RPE)
- printf("\tRead protect fuse is set; "
- "Sense Protect may be set but will be attempted\n");
- if (err)
- out_be32(&iim->err, err);
- printf("Sensing fuse(s) on Bank %d\n", bank);
- for (f = fstart, ctr = 0; num > 0; ctr++, f++, num--) {
- out_be32(&iim->ua, IIM_SET_UA(bank, f));
- out_be32(&iim->la, IIM_SET_LA(f, 0));
- out_be32(&iim->fctl, IIM_FCTL_ESNS_N);
- do
- udelay(20);
- while ((stat = in_be32(&iim->stat)) & IIM_STAT_BUSY);
- err = in_be32(&iim->err);
- if (err & IIM_ERR_SNSE) {
- iim_err_msg(err);
- out_be32(&iim->err, IIM_ERR_SNSE);
- return 1;
- }
- if (stat & IIM_STAT_SNSD) {
- out_be32(&iim->stat, 0);
- if (ctr % 4 == 0)
- printf("F%2d:", f);
- printf("\t%#04x", (u8)iim->sdat);
- if (ctr % 4 == 3)
- printf("\n");
- }
- if (err) {
- err_hold |= err;
- out_be32(&iim->err, err);
- }
- }
- if (ctr % 4 != 0)
- printf("\n");
- if (err_hold)
- iim_err_msg(err_hold);
-
- return 0;
-}
-
-int ads5121_fuse_stat(int bank)
-{
- iim512x_t *iim = &((immap_t *) CONFIG_SYS_IMMR)->iim;
- u32 iim_fbac;
- u32 err;
-
- out_be32(&iim->err, in_be32(&iim->err));
- if (bank == 0)
- iim_fbac = in_be32(&iim->fbac0);
- else
- iim_fbac = in_be32(&iim->fbac1);
- err = in_be32(&iim->err);
- if (err)
- iim_err_msg(err);
- if (err & IIM_ERR_RPE || iim_fbac & IIM_FBAC_FBRP) {
- if (iim_fbac == 0)
- printf("Since protection settings can't be read - "
- "try sensing fuse row 0;\n");
- return 0;
- }
- if (iim_fbac & IIM_PROTECTION)
- printf("Protection Fuses Bank %d = %#04x:\n", bank, iim_fbac);
- else if (!(err & IIM_ERR_RPE))
- printf("No Protection fuses are set\n");
- if (iim_fbac & IIM_FBAC_FBWP)
- printf("\tWrite Protect fuse is set\n");
- if (iim_fbac & IIM_FBAC_FBOP)
- printf("\tOverride Protect fuse is set\n");
- if (iim_fbac & IIM_FBAC_FBESP)
- printf("\tSense Protect Fuse is set\n");
- out_be32(&iim->err, in_be32(&iim->err));
-
- return 0;
-}
-
-int do_ads5121_fuse(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- int frow, n, v, bank;
-
- if (cur_bank == '0')
- bank = 0;
- else
- bank = 1;
-
- switch (argc) {
- case 0:
- case 1:
- printf("Usage:\n%s\n", cmdtp->usage);
- return 1;
- case 2:
- if (strncmp(argv[1], "stat", 4) == 0)
- return ads5121_fuse_stat(bank);
- if (strncmp(argv[1], "read", 4) == 0)
- return ads5121_fuse_read(bank, 0, IIM_FMAX + 1);
- if (strncmp(argv[1], "sense", 5) == 0)
- return ads5121_fuse_sense(bank, 0, IIM_FMAX + 1);
- if (strncmp(argv[1], "ovride", 6) == 0)
- return ads5121_fuse_override(bank, IIM_FMAX + 1, 0);
- if (strncmp(argv[1], "bank", 4) == 0) {
- printf("Active Fuse Bank is %c\n", cur_bank);
- return 0;
- }
- printf("Usage:\n%s\n", cmdtp->usage);
- return 1;
- case 3:
- if (strncmp(argv[1], "bank", 4) == 0) {
- if (argv[2][0] == '0')
- cur_bank = '0';
- else if (argv[2][0] == '1')
- cur_bank = '1';
- else {
- printf("Usage:\n%s\n", cmdtp->usage);
- return 1;
- }
-
- printf("Setting Active Fuse Bank to %c\n", cur_bank);
- return 0;
- }
- if (strncmp(argv[1], "prog", 4) == 0)
- return ads5121_fuse_prog(cmdtp, bank, argv[2]);
-
- frow = (int)simple_strtol(argv[2], NULL, 10);
- if (frow == 0 && argv[2][0] != '0')
- frow = -1;
- if (!in_range(frow, 0, IIM_FMAX,
- "<frow> must be between 0-31\n\n", cmdtp->usage))
- return 1;
- if (strncmp(argv[1], "read", 4) == 0)
- return ads5121_fuse_read(bank, frow, 1);
- if (strncmp(argv[1], "ovride", 6) == 0)
- return ads5121_fuse_override(bank, frow, 0);
- if (strncmp(argv[1], "sense", 5) == 0)
- return ads5121_fuse_sense(bank, frow, 1);
- printf("Usage:\n%s\n", cmdtp->usage);
- return 1;
- case 4:
- frow = (int)simple_strtol(argv[2], NULL, 10);
- if (frow == 0 && argv[2][0] != '0')
- frow = -1;
- if (!in_range(frow, 0, IIM_FMAX,
- "<frow> must be between 0-31\n\n", cmdtp->usage))
- return 1;
- if (strncmp(argv[1], "read", 4) == 0) {
- n = (int)simple_strtol(argv[3], NULL, 10);
- if (!in_range(frow + n, frow + 1, IIM_FMAX + 1,
- "<frow>+<n> must be between 1-32\n\n",
- cmdtp->usage))
- return 1;
- return ads5121_fuse_read(bank, frow, n);
- }
- if (strncmp(argv[1], "ovride", 6) == 0) {
- v = (int)simple_strtol(argv[3], NULL, 10);
- return ads5121_fuse_override(bank, frow, v);
- }
- if (strncmp(argv[1], "sense", 5) == 0) {
- n = (int)simple_strtol(argv[3], NULL, 10);
- if (!in_range(frow + n, frow + 1, IIM_FMAX + 1,
- "<frow>+<n> must be between 1-32\n\n",
- cmdtp->usage))
- return 1;
- return ads5121_fuse_sense(bank, frow, n);
- }
- printf("Usage:\n%s\n", cmdtp->usage);
- return 1;
- default: /* at least 5 args */
- printf("Usage:\n%s\n", cmdtp->usage);
- return 1;
- }
-}
-
-U_BOOT_CMD(
- fuse, CONFIG_SYS_MAXARGS, 0, do_ads5121_fuse,
- " - Read, Sense, Override or Program Fuses\n",
- "bank <n> - sets active Fuse Bank to 0 or 1\n"
- " no args shows current active bank\n"
- "fuse stat - print active fuse bank's protection status\n"
- "fuse read [<frow> [<n>]] - print <n> fuse rows starting at <frow>\n"
- " no args to print entire bank's fuses\n"
- "fuse ovride [<frow> [<v>]]- override fuses at <frow> with <v>\n"
- " no <v> defaults to 0 for the row\n"
- " no args resets entire bank to 0\n"
- " NOTE - settings persist until hard reset\n"
- "fuse sense [<frow>] - senses current fuse at <frow>\n"
- " no args for entire bank\n"
- "fuse prog <frow_bit> - program fuse at row <frow>, bit <_bit>\n"
- " <frow> is 0-31, <bit> is 0-7; eg. 13_2 \n"
- " WARNING - this is permanent"
-);
-#endif /* CONFIG_CMD_FUSE */
diff --git a/arch/powerpc/cpu/mpc8260/commproc.c b/arch/powerpc/cpu/mpc8260/commproc.c
index 22cef3e..484bd17 100644
--- a/arch/powerpc/cpu/mpc8260/commproc.c
+++ b/arch/powerpc/cpu/mpc8260/commproc.c
@@ -43,7 +43,7 @@
} while ((immr->im_cpm.cp_cpcr & CPM_CR_FLG) && ++count < 1000000);
#ifdef CONFIG_HARD_I2C
- *((unsigned short*)(&immr->im_dprambase[PROFF_I2C_BASE])) = 0;
+ immr->im_dprambase16[PROFF_I2C_BASE / sizeof(u16)] = 0;
#endif
}
diff --git a/arch/powerpc/cpu/mpc8260/cpu.c b/arch/powerpc/cpu/mpc8260/cpu.c
index f8bc5a9..22e1a23 100644
--- a/arch/powerpc/cpu/mpc8260/cpu.c
+++ b/arch/powerpc/cpu/mpc8260/cpu.c
@@ -106,7 +106,7 @@
* in the mask.
*/
m = immr & (IMMR_PARTNUM_MSK | IMMR_MASKNUM_MSK);
- k = *((ushort *) & immap->im_dprambase[PROFF_REVNUM]);
+ k = immap->im_dprambase16[PROFF_REVNUM / sizeof(u16)];
switch (m) {
case 0x0000:
diff --git a/arch/powerpc/cpu/mpc8260/i2c.c b/arch/powerpc/cpu/mpc8260/i2c.c
index b720b1f..e2341e9 100644
--- a/arch/powerpc/cpu/mpc8260/i2c.c
+++ b/arch/powerpc/cpu/mpc8260/i2c.c
@@ -221,14 +221,14 @@
i2c_init_board();
#endif
- dpaddr = *((unsigned short *) (&immap->im_dprambase[PROFF_I2C_BASE]));
+ dpaddr = immap->im_dprambase16[PROFF_I2C_BASE / sizeof(u16)];
if (dpaddr == 0) {
/* need to allocate dual port ram */
dpaddr = m8260_cpm_dpalloc(64 +
(NUM_RX_BDS * sizeof(I2C_BD)) +
(NUM_TX_BDS * sizeof(I2C_BD)) +
MAX_TX_SPACE, 64);
- *((unsigned short *)(&immap->im_dprambase[PROFF_I2C_BASE])) =
+ immap->im_dprambase16[PROFF_I2C_BASE / sizeof(u16)] =
dpaddr;
}
@@ -305,7 +305,7 @@
debug("[I2C] i2c_newio\n");
- dpaddr = *((unsigned short *)(&immap->im_dprambase[PROFF_I2C_BASE]));
+ dpaddr = immap->im_dprambase16[PROFF_I2C_BASE / sizeof(u16)];
iip = (iic_t *)&immap->im_dprambase[dpaddr];
state->rx_idx = 0;
state->tx_idx = 0;
@@ -480,7 +480,7 @@
return I2CERR_QUEUE_EMPTY;
}
- dpaddr = *((unsigned short *)(&immap->im_dprambase[PROFF_I2C_BASE]));
+ dpaddr = immap->im_dprambase16[PROFF_I2C_BASE / sizeof(u16)];
iip = (iic_t *)&immap->im_dprambase[dpaddr];
iip->iic_rbptr = iip->iic_rbase;
iip->iic_tbptr = iip->iic_tbase;
diff --git a/arch/powerpc/cpu/mpc8260/serial_smc.c b/arch/powerpc/cpu/mpc8260/serial_smc.c
index feba1f6..9410e4c 100644
--- a/arch/powerpc/cpu/mpc8260/serial_smc.c
+++ b/arch/powerpc/cpu/mpc8260/serial_smc.c
@@ -105,7 +105,7 @@
/* initialize pointers to SMC */
sp = (smc_t *) &(im->im_smc[SMC_INDEX]);
- *(ushort *)(&im->im_dprambase[PROFF_SMC_BASE]) = PROFF_SMC;
+ im->im_dprambase16[PROFF_SMC_BASE / sizeof(u16)] = PROFF_SMC;
up = (smc_uart_t *)&im->im_dprambase[PROFF_SMC];
/* Disable transmitter/receiver. */
@@ -331,7 +331,7 @@
/* initialize pointers to SMC */
sp = (smc_t *) &(im->im_smc[KGDB_SMC_INDEX]);
- *(ushort *)(&im->im_dprambase[KGDB_PROFF_SMC_BASE]) = KGDB_PROFF_SMC;
+ im->im_dprambase16[KGDB_PROFF_SMC_BASE / sizeof(u16)] = KGDB_PROFF_SMC;
up = (smc_uart_t *)&im->im_dprambase[KGDB_PROFF_SMC];
/* Disable transmitter/receiver. */
diff --git a/arch/powerpc/cpu/mpc8260/spi.c b/arch/powerpc/cpu/mpc8260/spi.c
index dc98ea7..01b492e 100644
--- a/arch/powerpc/cpu/mpc8260/spi.c
+++ b/arch/powerpc/cpu/mpc8260/spi.c
@@ -146,7 +146,7 @@
immr = (immap_t *) CONFIG_SYS_IMMR;
cp = (cpm8260_t *) &immr->im_cpm;
- *(ushort *)(&immr->im_dprambase[PROFF_SPI_BASE]) = PROFF_SPI;
+ immr->im_dprambase16[PROFF_SPI_BASE / sizeof(u16)] = PROFF_SPI;
spi = (spi_t *)&immr->im_dprambase[PROFF_SPI];
/* 1 */
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index 6e5aec2..2318064 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -88,6 +88,7 @@
COBJS-$(CONFIG_PPC_B4860) += ddr-gen3.o
COBJS-$(CONFIG_BSC9131) += ddr-gen3.o
COBJS-$(CONFIG_BSC9132) += ddr-gen3.o
+COBJS-$(CONFIG_PPC_T1040) += ddr-gen3.o
COBJS-$(CONFIG_CPM2) += ether_fcc.o
COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
@@ -106,6 +107,7 @@
COBJS-$(CONFIG_PPC_T4160) += t4240_ids.o
COBJS-$(CONFIG_PPC_B4420) += b4860_ids.o
COBJS-$(CONFIG_PPC_B4860) += b4860_ids.o
+COBJS-$(CONFIG_PPC_T1040) += t1040_ids.o
COBJS-$(CONFIG_QE) += qe_io.o
COBJS-$(CONFIG_CPM2) += serial_scc.o
@@ -143,6 +145,7 @@
COBJS-$(CONFIG_PPC_B4420) += b4860_serdes.o
COBJS-$(CONFIG_PPC_B4860) += b4860_serdes.o
COBJS-$(CONFIG_BSC9132) += bsc9132_serdes.o
+COBJS-$(CONFIG_PPC_T1040) += t1040_serdes.o
COBJS-y += cpu.o
COBJS-y += cpu_init.o
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 48e6a05..4067f05 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -337,7 +337,7 @@
while ((in_be32(&l2cache->l2csr0)
& (L2CSR0_L2FI|L2CSR0_L2LFC)) != 0)
;
- out_be32(&l2cache->l2csr0, L2CSR0_L2E);
+ out_be32(&l2cache->l2csr0, L2CSR0_L2E|L2CSR0_L2PE|L2CSR0_L2REP_MODE);
}
i++;
} while (!(cluster & TP_CLUSTER_EOC));
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
index dacfdd1..234fde4 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
@@ -180,12 +180,5 @@
invalidate_tlb(1);
-#if defined(CONFIG_SECURE_BOOT)
- /* Disable the TLBs created by ISBC */
- for (i = CONFIG_SYS_ISBC_START_TLB;
- i < CONFIG_SYS_ISBC_START_TLB + CONFIG_SYS_ISBC_NUM_TLBS; i++)
- disable_tlb(i);
-#endif
-
init_tlbs();
}
diff --git a/arch/powerpc/cpu/mpc85xx/mp.c b/arch/powerpc/cpu/mpc85xx/mp.c
index 43d4836..861c8e0 100644
--- a/arch/powerpc/cpu/mpc85xx/mp.c
+++ b/arch/powerpc/cpu/mpc85xx/mp.c
@@ -80,6 +80,8 @@
if (nr == id) {
table = (u32 *)&__spin_table;
printf("table base @ 0x%p\n", table);
+ } else if (is_core_disabled(nr)) {
+ puts("Disabled\n");
} else {
table = (u32 *)&__spin_table + nr * NUM_BOOT_ENTRY;
printf("Running on cpu %d\n", id);
diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S
index 467ea10..a4a21b0 100644
--- a/arch/powerpc/cpu/mpc85xx/release.S
+++ b/arch/powerpc/cpu/mpc85xx/release.S
@@ -154,16 +154,12 @@
ori r3,r3,toreset(__spin_table_addr)@l
lwz r3,0(r3)
- /*
- * r10 has the base address for the entry.
- * we cannot access it yet before setting up a new TLB
- */
mfspr r0,SPRN_PIR
#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
/*
* PIR definition for Chassis 2
* 0-17 Reserved (logic 0s)
- * 8-19 CHIP_ID, 2'b00 - SoC 1
+ * 18-19 CHIP_ID, 2'b00 - SoC 1
* all others - reserved
* 20-24 CLUSTER_ID 5'b00000 - CCM 1
* all others - reserved
@@ -177,32 +173,33 @@
* 2'b11 - core 3
* 29-31 THREAD_ID 3'b000 - thread 0
* 3'b001 - thread 1
+ *
+ * Power-on PIR increments threads by 0x01, cores within a cluster by 0x08
+ * and clusters by 0x20.
+ *
+ * We renumber PIR so that all threads in the system are consecutive.
*/
- rlwinm r4,r0,29,25,31
+
+ rlwinm r8,r0,29,0x03 /* r8 = core within cluster */
+ srwi r10,r0,5 /* r10 = cluster */
+
+ mulli r5,r10,CONFIG_SYS_FSL_CORES_PER_CLUSTER
+ add r5,r5,r8 /* for spin table index */
+ mulli r4,r5,CONFIG_SYS_FSL_THREADS_PER_CORE /* for PIR */
#elif defined(CONFIG_E500MC)
rlwinm r4,r0,27,27,31
+ mr r5,r4
#else
mr r4,r0
+ mr r5,r4
#endif
- slwi r8,r4,6 /* spin table is padded to 64 byte */
- add r10,r3,r8
-#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
- mfspr r0,SPRN_PIR
/*
- * core 0 thread 0: pir reset value 0x00, new pir 0
- * core 0 thread 1: pir reset value 0x01, new pir 1
- * core 1 thread 0: pir reset value 0x08, new pir 2
- * core 1 thread 1: pir reset value 0x09, new pir 3
- * core 2 thread 0: pir reset value 0x10, new pir 4
- * core 2 thread 1: pir reset value 0x11, new pir 5
- * etc.
- *
- * Only thread 0 of each core will be running, updating PIR doesn't
- * need to deal with the thread bits.
+ * r10 has the base address for the entry.
+ * we cannot access it yet before setting up a new TLB
*/
- rlwinm r4,r0,30,24,30
-#endif
+ slwi r8,r5,6 /* spin table is padded to 64 byte */
+ add r10,r3,r8
mtspr SPRN_PIR,r4 /* write to PIR register */
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index f00b1ab..a4d6e9c 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -112,23 +112,20 @@
#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
/*
* Each cluster has up to 4 cores, sharing the same PLL selection.
- * The cluster assignment is fixed per SoC. There is no way identify the
- * assignment so far, presuming the "first configuration" which is to
- * fill the lower cluster group first before moving up to next group.
- * PLL1, PLL2, PLL3 are cluster group A, feeding core 0~3 on cluster 1
- * and core 4~7 on cluster 2
- * PLL4, PLL5, PLL6 are cluster group B, feeding core 8~11 on cluster 3
- * and core 12~15 on cluster 4 if existing
+ * The cluster assignment is fixed per SoC. PLL1, PLL2, PLL3 are
+ * cluster group A, feeding cores on cluster 1 and cluster 2.
+ * PLL4, PLL5, PLL6 are cluster group B, feeding cores on cluster 3
+ * and cluster 4 if existing.
*/
for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) {
- u32 c_pll_sel = (in_be32(&clk->clkc0csr + (cpu / 4) * 8) >> 27)
+ int cluster = fsl_qoriq_core_to_cluster(cpu);
+ u32 c_pll_sel = (in_be32(&clk->clkcsr[cluster].clkcncsr) >> 27)
& 0xf;
u32 cplx_pll = core_cplx_PLL[c_pll_sel];
if (cplx_pll > 3)
printf("Unsupported architecture configuration"
" in function %s\n", __func__);
- cplx_pll += (cpu / 8) * 3;
-
+ cplx_pll += (cluster / 2) * 3;
sysInfo->freqProcessor[cpu] =
freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel];
}
@@ -240,7 +237,8 @@
#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) {
- u32 c_pll_sel = (in_be32(&clk->clkc0csr + cpu*8) >> 27) & 0xf;
+ u32 c_pll_sel = (in_be32(&clk->clkcsr[cpu].clkcncsr) >> 27)
+ & 0xf;
u32 cplx_pll = core_cplx_PLL[c_pll_sel];
sysInfo->freqProcessor[cpu] =
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index 5542d0a..4f0480b 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -734,7 +734,8 @@
isync
and. r1, r0, r4
bne 1b
- lis r4, L2CSR0_L2E@h
+ lis r4, (L2CSR0_L2E|L2CSR0_L2PE)@h
+ ori r4, r4, (L2CSR0_L2REP_MODE)@l
sync
stw r4, 0(r3) /* enable L2 */
delete_ccsr_l2_tlb:
@@ -1905,6 +1906,7 @@
slwi r4,r4,(10 - 1 - L1_CACHE_SHIFT)
mtctr r4
1: dcbi r0,r3
+ dcblc r0,r3
addi r3,r3,CONFIG_SYS_CACHELINE_SIZE
bdnz 1b
sync
diff --git a/arch/powerpc/cpu/mpc85xx/t1040_ids.c b/arch/powerpc/cpu/mpc85xx/t1040_ids.c
new file mode 100644
index 0000000..ed61599
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/t1040_ids.c
@@ -0,0 +1,135 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
+ /* dqrr liodn, frame data liodn, liodn off, sdest */
+ SET_QP_INFO(1, 27, 1, 0),
+ SET_QP_INFO(2, 28, 1, 0),
+ SET_QP_INFO(3, 29, 1, 1),
+ SET_QP_INFO(4, 30, 1, 1),
+ SET_QP_INFO(5, 31, 1, 2),
+ SET_QP_INFO(6, 32, 1, 2),
+ SET_QP_INFO(7, 33, 1, 3),
+ SET_QP_INFO(8, 34, 1, 3),
+ SET_QP_INFO(9, 35, 1, 0),
+ SET_QP_INFO(10, 36, 1, 0),
+ SET_QP_INFO(11, 37, 1, 1),
+ SET_QP_INFO(12, 38, 1, 1),
+ SET_QP_INFO(13, 39, 1, 2),
+ SET_QP_INFO(14, 40, 1, 2),
+ SET_QP_INFO(15, 41, 1, 3),
+ SET_QP_INFO(16, 42, 1, 3),
+ SET_QP_INFO(17, 43, 1, 0),
+ SET_QP_INFO(18, 44, 1, 0),
+ SET_QP_INFO(19, 45, 1, 1),
+ SET_QP_INFO(20, 46, 1, 1),
+ SET_QP_INFO(21, 47, 1, 2),
+ SET_QP_INFO(22, 48, 1, 2),
+ SET_QP_INFO(23, 49, 1, 3),
+ SET_QP_INFO(24, 50, 1, 3),
+ SET_QP_INFO(25, 51, 1, 0),
+};
+#endif
+
+struct srio_liodn_id_table srio_liodn_tbl[] = {
+ SET_SRIO_LIODN_1(1, 307),
+ SET_SRIO_LIODN_1(2, 387),
+};
+int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl);
+
+struct liodn_id_table liodn_tbl[] = {
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ SET_QMAN_LIODN(62),
+ SET_BMAN_LIODN(63),
+#endif
+
+ SET_SDHC_LIODN(1, 552),
+
+ SET_USB_LIODN(1, "fsl-usb2-mph", 553),
+
+ SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 1, 148),
+
+ SET_DMA_LIODN(1, 147),
+ SET_DMA_LIODN(2, 227),
+
+ SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0),
+ SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0),
+ SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0),
+ SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0),
+
+ /* SET_NEXUS_LIODN(557), -- not yet implemented */
+};
+int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+struct liodn_id_table fman1_liodn_tbl[] = {
+ SET_FMAN_RX_1G_LIODN(1, 0, 88),
+ SET_FMAN_RX_1G_LIODN(1, 1, 89),
+ SET_FMAN_RX_1G_LIODN(1, 2, 90),
+ SET_FMAN_RX_1G_LIODN(1, 3, 91),
+ SET_FMAN_RX_1G_LIODN(1, 4, 92),
+ SET_FMAN_RX_1G_LIODN(1, 5, 93),
+ SET_FMAN_RX_10G_LIODN(1, 0, 94),
+ SET_FMAN_RX_10G_LIODN(1, 1, 95),
+};
+int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
+#endif
+
+struct liodn_id_table sec_liodn_tbl[] = {
+ SET_SEC_JR_LIODN_ENTRY(0, 454, 458),
+ SET_SEC_JR_LIODN_ENTRY(1, 455, 459),
+ SET_SEC_JR_LIODN_ENTRY(2, 456, 460),
+ SET_SEC_JR_LIODN_ENTRY(3, 457, 461),
+ SET_SEC_RTIC_LIODN_ENTRY(a, 453),
+ SET_SEC_RTIC_LIODN_ENTRY(b, 549),
+ SET_SEC_RTIC_LIODN_ENTRY(c, 550),
+ SET_SEC_RTIC_LIODN_ENTRY(d, 551),
+ SET_SEC_DECO_LIODN_ENTRY(0, 541, 610),
+ SET_SEC_DECO_LIODN_ENTRY(1, 542, 611),
+};
+int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_RMAN
+struct liodn_id_table rman_liodn_tbl[] = {
+ /* Set RMan block 0-3 liodn offset */
+ SET_RMAN_LIODN(0, 678),
+ SET_RMAN_LIODN(1, 679),
+ SET_RMAN_LIODN(2, 680),
+ SET_RMAN_LIODN(3, 681),
+};
+int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl);
+#endif
+
+struct liodn_id_table liodn_bases[] = {
+ [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(462, 558),
+#ifdef CONFIG_SYS_DPAA_FMAN
+ [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973),
+#endif
+#ifdef CONFIG_SYS_DPAA_RMAN
+ [FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922),
+#endif
+};
diff --git a/arch/powerpc/cpu/mpc85xx/t1040_serdes.c b/arch/powerpc/cpu/mpc85xx/t1040_serdes.c
new file mode 100644
index 0000000..8261e03
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/t1040_serdes.c
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_serdes.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include "fsl_corenet2_serdes.h"
+
+static u8 serdes_cfg_tbl[MAX_SERDES][0xC4][SRDS_MAX_LANES] = {
+ { /* SerDes 1 */
+ [0x69] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B,
+ PCIE2, PCIE3, SGMII_FM1_DTSEC4, SATA1},
+ [0x66] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B,
+ PCIE2, PCIE3, PCIE4, SATA1},
+ [0x67] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B,
+ PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5},
+ [0x60] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B,
+ PCIE2, PCIE2, PCIE2, PCIE2},
+ [0x8D] = {PCIE1, SGMII_SW1_DTSEC3, SGMII_SW1_DTSEC1, SGMII_SW1_DTSEC2,
+ PCIE2, SGMII_SW1_DTSEC6, SGMII_SW1_DTSEC4, SGMII_SW1_DTSEC5},
+ [0x89] = {PCIE1, SGMII_SW1_DTSEC3, SGMII_SW1_DTSEC1, SGMII_SW1_DTSEC2,
+ PCIE2, PCIE3, SGMII_SW1_DTSEC4, SATA1},
+ [0x86] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ PCIE2, PCIE3, PCIE4, SATA1},
+ [0x87] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5},
+ [0xA7] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5},
+ [0xAA] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ PCIE2, PCIE3, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5},
+ [0x40] = {PCIE1, PCIE1, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ PCIE2, PCIE2, PCIE2, PCIE2},
+ [0x06] = {PCIE1, PCIE1, PCIE1, PCIE1,
+ PCIE2, PCIE3, PCIE4, SATA1},
+ [0x08] = {PCIE1, PCIE1, PCIE1, PCIE1,
+ PCIE2, PCIE3, SATA2, SATA1},
+ [0x8F] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ AURORA, NONE, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5},
+ [0x85] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ PCIE2, PCIE2, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5},
+ [0xA5] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ PCIE2, PCIE2, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5},
+ [0x00] = {PCIE1, PCIE1, PCIE1, PCIE1,
+ PCIE2, PCIE2, PCIE2, PCIE2},
+ },
+ {
+ },
+ {
+ },
+ {
+ },
+};
+
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+ return serdes_cfg_tbl[serdes][cfg][lane];
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+ int i;
+
+ if (prtcl > (ARRAY_SIZE(serdes_cfg_tbl[serdes])))
+ return 0;
+
+ for (i = 0; i < SRDS_MAX_LANES; i++) {
+ if (serdes_cfg_tbl[serdes][prtcl][i] != NONE)
+ return 1;
+ }
+
+ return 0;
+}
diff --git a/arch/powerpc/cpu/mpc8xx/cpu.c b/arch/powerpc/cpu/mpc8xx/cpu.c
index b6b733d..dc33eb3 100644
--- a/arch/powerpc/cpu/mpc8xx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xx/cpu.c
@@ -78,7 +78,8 @@
if ((pvr >> 16) != 0x0050)
return -1;
- k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
+ k = (immr << 16) |
+ immap->im_cpm.cp_dparam16[PROFF_REVNUM / sizeof(u16)];
m = 0;
suf = "";
@@ -194,7 +195,8 @@
if ((pvr >> 16) != 0x0050)
return -1;
- k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
+ k = (immr << 16) |
+ immap->im_cpm.cp_dparam16[PROFF_REVNUM / sizeof(u16)];
m = 0;
switch (k) {
@@ -253,7 +255,8 @@
if ((pvr >> 16) != 0x0050)
return -1;
- k = (immr << 16) | in_be16((ushort *)&immap->im_cpm.cp_dparam[0xB0]);
+ k = (immr << 16) |
+ in_be16(&immap->im_cpm.cp_dparam16[PROFF_REVNUM / sizeof(u16)]);
m = 0;
switch (k) {
@@ -312,7 +315,8 @@
if ((pvr >> 16) != 0x0050)
return -1;
- k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
+ k = (immr << 16) |
+ immap->im_cpm.cp_dparam16[PROFF_REVNUM / sizeof(u16)];
m = 0;
switch (k) {
diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c
index 0087cd0..bc26855 100644
--- a/arch/powerpc/cpu/mpc8xxx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xxx/cpu.c
@@ -85,6 +85,12 @@
CPU_TYPE_ENTRY(G4440, G4440, 0),
CPU_TYPE_ENTRY(B4420, B4420, 0),
CPU_TYPE_ENTRY(B4220, B4220, 0),
+ CPU_TYPE_ENTRY(T1040, T1040, 0),
+ CPU_TYPE_ENTRY(T1041, T1041, 0),
+ CPU_TYPE_ENTRY(T1042, T1042, 0),
+ CPU_TYPE_ENTRY(T1020, T1020, 0),
+ CPU_TYPE_ENTRY(T1021, T1021, 0),
+ CPU_TYPE_ENTRY(T1022, T1022, 0),
CPU_TYPE_ENTRY(BSC9130, 9130, 1),
CPU_TYPE_ENTRY(BSC9131, 9131, 1),
CPU_TYPE_ENTRY(BSC9132, 9132, 2),
@@ -97,35 +103,70 @@
};
#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+static inline u32 init_type(u32 cluster, int init_id)
+{
+ ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 idx = (cluster >> (init_id * 8)) & TP_CLUSTER_INIT_MASK;
+ u32 type = in_be32(&gur->tp_ityp[idx]);
+
+ if (type & TP_ITYP_AV)
+ return type;
+
+ return 0;
+}
+
u32 compute_ppc_cpumask(void)
{
- ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
int i = 0, count = 0;
- u32 cluster, mask = 0;
+ u32 cluster, type, mask = 0;
do {
int j;
- cluster = in_be32(&gur->tp_cluster[i++].lower);
- for (j = 0; j < 4; j++) {
- u32 idx = (cluster >> (j*8)) & TP_CLUSTER_INIT_MASK;
- u32 type = in_be32(&gur->tp_ityp[idx]);
-
- if (type & TP_ITYP_AV) {
+ cluster = in_be32(&gur->tp_cluster[i].lower);
+ for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
+ type = init_type(cluster, j);
+ if (type) {
if (TP_ITYP_TYPE(type) == TP_ITYP_TYPE_PPC)
mask |= 1 << count;
+ count++;
}
- count++;
}
+ i++;
} while ((cluster & TP_CLUSTER_EOC) != TP_CLUSTER_EOC);
return mask;
}
+
+int fsl_qoriq_core_to_cluster(unsigned int core)
+{
+ ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ int i = 0, count = 0;
+ u32 cluster;
+
+ do {
+ int j;
+ cluster = in_be32(&gur->tp_cluster[i].lower);
+ for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
+ if (init_type(cluster, j)) {
+ if (count == core)
+ return i;
+ count++;
+ }
+ }
+ i++;
+ } while ((cluster & TP_CLUSTER_EOC) != TP_CLUSTER_EOC);
+
+ return -1; /* cannot identify the cluster */
+}
+
#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
/*
* Before chassis genenration 2, the cpumask should be hard-coded.
* In case of cpu type unknown or cpumask unset, use 1 as fail save.
*/
#define compute_ppc_cpumask() 1
+#define fsl_qoriq_core_to_cluster(x) x
#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
static struct cpu_type cpu_type_unknown = CPU_TYPE_ENTRY(Unknown, Unknown, 0);
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
index 9adde31..e958e13 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
@@ -44,7 +44,6 @@
printf("DDR clock (MCLK cycle %u ps) is faster than "
"the slowest DIMM(s) (tCKmin %u ps) can support.\n",
mclk_ps, tCKmin_X_ps);
- return 1;
}
/* determine the acutal cas latency */
caslat_actual = (tAAmin_ps + mclk_ps - 1) / mclk_ps;
@@ -60,7 +59,6 @@
if (caslat_actual * mclk_ps > 20000) {
printf("The choosen cas latency %d is too large\n",
caslat_actual);
- return 1;
}
outpdimm->lowest_common_SPD_caslat = caslat_actual;
diff --git a/arch/powerpc/include/asm/8xx_immap.h b/arch/powerpc/include/asm/8xx_immap.h
index 40679cb..01129ed 100644
--- a/arch/powerpc/include/asm/8xx_immap.h
+++ b/arch/powerpc/include/asm/8xx_immap.h
@@ -485,7 +485,12 @@
* Some processors don't have all of it populated.
*/
u_char cp_dpmem[0x1C00]; /* BD / Data / ucode */
- u_char cp_dparam[0x400]; /* Parameter RAM */
+
+ /* Parameter RAM */
+ union {
+ u_char cp_dparam[0x400];
+ u16 cp_dparam16[0x200];
+ };
} cpm8xx_t;
/* Internal memory map.
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 7571941..1009a31 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -512,55 +512,34 @@
#define CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
-#elif defined(CONFIG_PPC_T4240)
+#elif defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160)
+#define CONFIG_E6500
#define CONFIG_SYS_PPC64 /* 64-bit core */
#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */
+#define CONFIG_SYS_FSL_CORES_PER_CLUSTER 4
#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */
+#ifdef CONFIG_PPC_T4240
#define CONFIG_MAX_CPUS 12
-#define CONFIG_SYS_FSL_NUM_CC_PLLS 5
-#define CONFIG_SYS_FSL_NUM_LAWS 32
-#define CONFIG_SYS_FSL_SRDS_3
-#define CONFIG_SYS_FSL_SRDS_4
-#define CONFIG_SYS_FSL_SEC_COMPAT 4
-#define CONFIG_SYS_NUM_FMAN 2
#define CONFIG_SYS_NUM_FM1_DTSEC 8
#define CONFIG_SYS_NUM_FM1_10GEC 2
#define CONFIG_SYS_NUM_FM2_DTSEC 8
#define CONFIG_SYS_NUM_FM2_10GEC 2
#define CONFIG_NUM_DDR_CONTROLLERS 3
-#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7
-#define CONFIG_SYS_FMAN_V3
-#define CONFIG_SYS_FM_MURAM_SIZE 0x60000
-#define CONFIG_SYS_FSL_TBCLK_DIV 16
-#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v3.0"
-#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
-#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
-#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
-#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
-#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
-#define CONFIG_SYS_FSL_ERRATUM_A004468
-#define CONFIG_SYS_FSL_ERRATUM_A_004934
-#define CONFIG_SYS_FSL_ERRATUM_A005871
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
-
-#elif defined(CONFIG_PPC_T4160)
-#define CONFIG_SYS_PPC64 /* 64-bit core */
-#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
-#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */
-#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */
+#else
#define CONFIG_MAX_CPUS 8
+#define CONFIG_SYS_NUM_FM1_DTSEC 7
+#define CONFIG_SYS_NUM_FM1_10GEC 1
+#define CONFIG_SYS_NUM_FM2_DTSEC 7
+#define CONFIG_SYS_NUM_FM2_10GEC 1
+#define CONFIG_NUM_DDR_CONTROLLERS 2
+#endif
#define CONFIG_SYS_FSL_NUM_CC_PLLS 5
#define CONFIG_SYS_FSL_NUM_LAWS 32
#define CONFIG_SYS_FSL_SRDS_3
#define CONFIG_SYS_FSL_SRDS_4
#define CONFIG_SYS_FSL_SEC_COMPAT 4
#define CONFIG_SYS_NUM_FMAN 2
-#define CONFIG_SYS_NUM_FM1_DTSEC 7
-#define CONFIG_SYS_NUM_FM1_10GEC 1
-#define CONFIG_SYS_NUM_FM2_DTSEC 7
-#define CONFIG_SYS_NUM_FM2_10GEC 1
-#define CONFIG_NUM_DDR_CONTROLLERS 2
#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7
#define CONFIG_SYS_FMAN_V3
#define CONFIG_SYS_FM_MURAM_SIZE 0x60000
@@ -577,18 +556,15 @@
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#define CONFIG_SYS_FSL_PCI_VER_3_X
-#elif defined(CONFIG_PPC_B4420)
+#elif defined(CONFIG_PPC_B4860) || defined(CONFIG_PPC_B4420)
+#define CONFIG_E6500
#define CONFIG_SYS_PPC64 /* 64-bit core */
#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */
#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */
-#define CONFIG_MAX_CPUS 2
-#define CONFIG_SYS_FSL_NUM_CC_PLLS 4
#define CONFIG_SYS_FSL_NUM_LAWS 32
#define CONFIG_SYS_FSL_SEC_COMPAT 4
#define CONFIG_SYS_NUM_FMAN 1
-#define CONFIG_SYS_NUM_FM1_DTSEC 4
-#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7
#define CONFIG_SYS_FMAN_V3
#define CONFIG_SYS_FM_MURAM_SIZE 0x60000
@@ -599,30 +575,50 @@
#define CONFIG_SYS_FSL_ERRATUM_A005871
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
-#elif defined(CONFIG_PPC_B4860)
-#define CONFIG_SYS_PPC64 /* 64-bit core */
-#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
-#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */
-#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */
+#ifdef CONFIG_PPC_B4860
+#define CONFIG_SYS_FSL_CORES_PER_CLUSTER 4
#define CONFIG_MAX_CPUS 4
#define CONFIG_SYS_FSL_NUM_CC_PLLS 4
-#define CONFIG_SYS_FSL_NUM_LAWS 32
-#define CONFIG_SYS_FSL_SEC_COMPAT 4
-#define CONFIG_SYS_NUM_FMAN 1
#define CONFIG_SYS_NUM_FM1_DTSEC 6
#define CONFIG_SYS_NUM_FM1_10GEC 2
#define CONFIG_NUM_DDR_CONTROLLERS 2
+#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
+#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
+#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
+#else
+#define CONFIG_MAX_CPUS 2
+#define CONFIG_SYS_FSL_CORES_PER_CLUSTER 2
+#define CONFIG_SYS_FSL_NUM_CC_PLLS 4
+#define CONFIG_SYS_NUM_FM1_DTSEC 4
+#define CONFIG_SYS_NUM_FM1_10GEC 0
+#define CONFIG_NUM_DDR_CONTROLLERS 1
+#endif
+
+#elif defined(CONFIG_PPC_T1040)
+#define CONFIG_E5500
+#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */
+#define CONFIG_SYS_FSL_CORES_PER_CLUSTER 1
+#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */
+#define CONFIG_MAX_CPUS 4
+#define CONFIG_SYS_FSL_NUM_CC_PLLS 5
+#define CONFIG_SYS_FSL_NUM_LAWS 16
+#define CONFIG_SYS_FSL_SEC_COMPAT 4
+#define CONFIG_SYS_NUM_FMAN 1
+#define CONFIG_SYS_NUM_FM1_DTSEC 5
+#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7
+#define CONFIG_SYS_FSL_IFC_BANK_COUNT 4
#define CONFIG_SYS_FMAN_V3
-#define CONFIG_SYS_FM_MURAM_SIZE 0x60000
-#define CONFIG_SYS_FSL_TBCLK_DIV 16
+#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
+#define CONFIG_SYS_FSL_TBCLK_DIV 32
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4"
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
-#define CONFIG_SYS_FSL_ERRATUM_A_004934
-#define CONFIG_SYS_FSL_ERRATUM_A005871
+#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#else
@@ -633,4 +629,10 @@
#error "CONFIG_SYS_CCSRBAR_DEFAULT is not defined for this platform."
#endif
+#ifdef CONFIG_E6500
+#define CONFIG_SYS_FSL_THREADS_PER_CORE 2
+#else
+#define CONFIG_SYS_FSL_THREADS_PER_CORE 1
+#endif
+
#endif /* _ASM_MPC85xx_CONFIG_H_ */
diff --git a/arch/powerpc/include/asm/fsl_law.h b/arch/powerpc/include/asm/fsl_law.h
index f9cec8e..90b264d 100644
--- a/arch/powerpc/include/asm/fsl_law.h
+++ b/arch/powerpc/include/asm/fsl_law.h
@@ -70,6 +70,8 @@
LAW_TRGT_IF_DCSR = 0x1d,
LAW_TRGT_IF_LBC = 0x1f,
LAW_TRGT_IF_QMAN = 0x3c,
+
+ LAW_TRGT_IF_MAPLE = 0x50,
};
#define LAW_TRGT_IF_DDR LAW_TRGT_IF_DDR_1
#define LAW_TRGT_IF_IFC LAW_TRGT_IF_LBC
diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h
index d1c1967..2bc6ed1 100644
--- a/arch/powerpc/include/asm/fsl_secure_boot.h
+++ b/arch/powerpc/include/asm/fsl_secure_boot.h
@@ -23,16 +23,6 @@
#ifndef __FSL_SECURE_BOOT_H
#define __FSL_SECURE_BOOT_H
-/* Starting TLB number for the TLB entried for 3.5 G space created by ISBC */
-#if defined(CONFIG_FSL_CORENET)
-#define CONFIG_SYS_ISBC_START_TLB 3
-#else
-#define CONFIG_SYS_ISBC_START_TLB 0
-#endif
-
-/* Number fo TLB's created by ISBC */
-#define CONFIG_SYS_ISBC_NUM_TLBS 5
-
#if defined(CONFIG_FSL_CORENET)
#define CONFIG_SYS_PBI_FLASH_BASE 0xc0000000
#else
diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h
index 6cd7379..ccb91fb 100644
--- a/arch/powerpc/include/asm/fsl_serdes.h
+++ b/arch/powerpc/include/asm/fsl_serdes.h
@@ -80,6 +80,14 @@
XFI_FM2_MAC9,
XFI_FM2_MAC10,
INTERLAKEN,
+ SGMII_SW1_DTSEC1, /* SW indicates on L2 switch */
+ SGMII_SW1_DTSEC2,
+ SGMII_SW1_DTSEC3,
+ SGMII_SW1_DTSEC4,
+ SGMII_SW1_DTSEC5,
+ SGMII_SW1_DTSEC6,
+ QSGMII_SW1_A, /* SW indicates on L2 swtich */
+ QSGMII_SW1_B,
};
enum srds {
diff --git a/arch/powerpc/include/asm/immap_512x.h b/arch/powerpc/include/asm/immap_512x.h
index d96e536..8248219 100644
--- a/arch/powerpc/include/asm/immap_512x.h
+++ b/arch/powerpc/include/asm/immap_512x.h
@@ -1272,4 +1272,6 @@
#define CONFIG_SYS_MPC512x_USB_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_MPC512x_USB_OFFSET)
+#define IIM_BASE_ADDR (CONFIG_SYS_IMMR + offsetof(immap_t, iim))
+
#endif /* __IMMAP_512x__ */
diff --git a/arch/powerpc/include/asm/immap_8260.h b/arch/powerpc/include/asm/immap_8260.h
index 4974ae5..c7021a7 100644
--- a/arch/powerpc/include/asm/immap_8260.h
+++ b/arch/powerpc/include/asm/immap_8260.h
@@ -526,13 +526,18 @@
/* Some references are into the unique and known dpram spaces,
* others are from the generic base.
*/
-#define im_dprambase im_dpram1
- u_char im_dpram1[16*1024];
- char res1[16*1024];
- u_char im_dpram2[4*1024];
- char res2[8*1024];
- u_char im_dpram3[4*1024];
- char res3[16*1024];
+ union {
+ struct {
+ u_char im_dpram1[16 * 1024];
+ char res1[16 * 1024];
+ u_char im_dpram2[4 * 1024];
+ char res2[8 * 1024];
+ u_char im_dpram3[4 * 1024];
+ char res3[16 * 1024];
+ };
+ u8 im_dprambase[64 * 1024];
+ u16 im_dprambase16[32 * 1024];
+ };
sysconf8260_t im_siu_conf; /* SIU Configuration */
memctl8260_t im_memctl; /* Memory Controller */
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 28fe1d2..4052037 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1844,6 +1844,11 @@
#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 25
#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00ff0000
#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT 16
+#elif defined(CONFIG_PPC_T1040)
+#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xff000000
+#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 24
+#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00fe0000
+#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT 17
#endif
#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S1_PLL1 0x00800000
#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S1_PLL2 0x00400000
@@ -1991,6 +1996,7 @@
#define TP_CLUSTER_EOC 0x80000000 /* end of clusters */
#define TP_CLUSTER_INIT_MASK 0x0000003f /* initiator mask */
+#define TP_INIT_PER_CLUSTER 4
#define FSL_CORENET_DCSR_SZ_MASK 0x00000003
#define FSL_CORENET_DCSR_SZ_4M 0x0
@@ -2003,22 +2009,13 @@
#define rmuliodnr rio1maintliodnr
typedef struct ccsr_clk {
- u32 clkc0csr; /* 0x000 Core 0 Clock control/status */
- u8 res1[0x1c];
- u32 clkc1csr; /* 0x020 Core 1 Clock control/status */
- u8 res2[0x1c];
- u32 clkc2csr; /* 0x040 Core 2 Clock control/status */
- u8 res3[0x1c];
- u32 clkc3csr; /* 0x060 Core 3 Clock control/status */
- u8 res4[0x1c];
- u32 clkc4csr; /* 0x080 Core 4 Clock control/status */
- u8 res5[0x1c];
- u32 clkc5csr; /* 0x0a0 Core 5 Clock control/status */
- u8 res6[0x1c];
- u32 clkc6csr; /* 0x0c0 Core 6 Clock control/status */
- u8 res7[0x1c];
- u32 clkc7csr; /* 0x0e0 Core 7 Clock control/status */
- u8 res8[0x71c];
+ struct {
+ u32 clkcncsr; /* core cluster n clock control status */
+ u8 res_004[0x0c];
+ u32 clkcgnhwacsr;/* clock generator n hardware accelerator */
+ u8 res_014[0x0c];
+ } clkcsr[8];
+ u8 res_100[0x700]; /* 0x100 */
u32 pllc1gsr; /* 0x800 Cluster PLL 1 General Status */
u8 res10[0x1c];
u32 pllc2gsr; /* 0x820 Cluster PLL 2 General Status */
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 5c0c438..56b22d8 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -507,6 +507,15 @@
#define L2CSR0_L2IO 0x00100000 /* L2 Cache Instruction Only */
#define L2CSR0_L2DO 0x00010000 /* L2 Cache Data Only */
#define L2CSR0_L2REP 0x00003000 /* L2 Line Replacement Algo */
+
+/* e6500 */
+#define L2CSR0_L2REP_SPLRUAGE 0x00000000 /* L2REP Streaming PLRU with Aging */
+#define L2CSR0_L2REP_FIFO 0x00001000 /* L2REP FIFO */
+#define L2CSR0_L2REP_SPLRU 0x00002000 /* L2REP Streaming PLRU */
+#define L2CSR0_L2REP_PLRU 0x00003000 /* L2REP PLRU */
+
+#define L2CSR0_L2REP_MODE L2CSR0_L2REP_SPLRUAGE
+
#define L2CSR0_L2FL 0x00000800 /* L2 Cache Flush */
#define L2CSR0_L2LFC 0x00000400 /* L2 Cache Lock Flash Clear */
#define L2CSR0_L2LOA 0x00000080 /* L2 Cache Lock Overflow Allocate */
@@ -1117,6 +1126,12 @@
#define SVR_G4440 0x868101
#define SVR_B4420 0x868102
#define SVR_B4220 0x868103
+#define SVR_T1040 0x852000
+#define SVR_T1041 0x852001
+#define SVR_T1042 0x852002
+#define SVR_T1020 0x852100
+#define SVR_T1021 0x852101
+#define SVR_T1022 0x852102
#define SVR_8610 0x80A000
#define SVR_8641 0x809000
@@ -1185,6 +1200,8 @@
struct cpu_type *identify_cpu(u32 ver);
int fixup_cpu(void);
+int fsl_qoriq_core_to_cluster(unsigned int core);
+
#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
#define CPU_TYPE_ENTRY(n, v, nc) \
{ .name = #n, .soc_ver = SVR_##v, .num_cores = (nc), \
diff --git a/board/CarMediaLab/flea3/flea3.c b/board/CarMediaLab/flea3/flea3.c
index f2b4284..af5338e 100644
--- a/board/CarMediaLab/flea3/flea3.c
+++ b/board/CarMediaLab/flea3/flea3.c
@@ -29,8 +29,7 @@
#include <asm/errno.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/crm_regs.h>
-#include <asm/arch/mx35_pins.h>
-#include <asm/arch/iomux.h>
+#include <asm/arch/iomux-mx35.h>
#include <i2c.h>
#include <linux/types.h>
#include <asm/gpio.h>
@@ -165,62 +164,68 @@
static void setup_iomux_uart3(void)
{
- mxc_request_iomux(MX35_PIN_RTS2, MUX_CONFIG_ALT7);
- mxc_request_iomux(MX35_PIN_CTS2, MUX_CONFIG_ALT7);
+ static const iomux_v3_cfg_t uart3_pads[] = {
+ MX35_PAD_RTS2__UART3_RXD_MUX,
+ MX35_PAD_CTS2__UART3_TXD_MUX,
+ };
+
+ imx_iomux_v3_setup_multiple_pads(uart3_pads, ARRAY_SIZE(uart3_pads));
}
+#define I2C_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_ODE)
+
static void setup_iomux_i2c(void)
{
- int pad;
+ static const iomux_v3_cfg_t i2c_pads[] = {
+ NEW_PAD_CTRL(MX35_PAD_I2C1_CLK__I2C1_SCL, I2C_PAD_CTRL),
+ NEW_PAD_CTRL(MX35_PAD_I2C1_DAT__I2C1_SDA, I2C_PAD_CTRL),
- mxc_request_iomux(MX35_PIN_I2C1_CLK, MUX_CONFIG_SION);
- mxc_request_iomux(MX35_PIN_I2C1_DAT, MUX_CONFIG_SION);
+ NEW_PAD_CTRL(MX35_PAD_TX3_RX2__I2C3_SCL, I2C_PAD_CTRL),
+ NEW_PAD_CTRL(MX35_PAD_TX2_RX3__I2C3_SDA, I2C_PAD_CTRL),
+ };
- pad = (PAD_CTL_HYS_SCHMITZ | PAD_CTL_PKE_ENABLE \
- | PAD_CTL_PUE_PUD | PAD_CTL_ODE_OpenDrain);
-
- mxc_iomux_set_pad(MX35_PIN_I2C1_CLK, pad);
- mxc_iomux_set_pad(MX35_PIN_I2C1_DAT, pad);
-
- mxc_request_iomux(MX35_PIN_TX3_RX2, MUX_CONFIG_ALT1);
- mxc_request_iomux(MX35_PIN_TX2_RX3, MUX_CONFIG_ALT1);
-
- mxc_iomux_set_pad(MX35_PIN_TX3_RX2, pad);
- mxc_iomux_set_pad(MX35_PIN_TX2_RX3, pad);
+ imx_iomux_v3_setup_multiple_pads(i2c_pads, ARRAY_SIZE(i2c_pads));
}
static void setup_iomux_spi(void)
{
- mxc_request_iomux(MX35_PIN_CSPI1_MOSI, MUX_CONFIG_SION);
- mxc_request_iomux(MX35_PIN_CSPI1_MISO, MUX_CONFIG_SION);
- mxc_request_iomux(MX35_PIN_CSPI1_SS0, MUX_CONFIG_SION);
- mxc_request_iomux(MX35_PIN_CSPI1_SS1, MUX_CONFIG_SION);
- mxc_request_iomux(MX35_PIN_CSPI1_SCLK, MUX_CONFIG_SION);
+ static const iomux_v3_cfg_t spi_pads[] = {
+ MX35_PAD_CSPI1_MOSI__CSPI1_MOSI,
+ MX35_PAD_CSPI1_MISO__CSPI1_MISO,
+ MX35_PAD_CSPI1_SS0__CSPI1_SS0,
+ MX35_PAD_CSPI1_SS1__CSPI1_SS1,
+ MX35_PAD_CSPI1_SCLK__CSPI1_SCLK,
+ };
+
+ imx_iomux_v3_setup_multiple_pads(spi_pads, ARRAY_SIZE(spi_pads));
}
static void setup_iomux_fec(void)
{
- /* setup pins for FEC */
- mxc_request_iomux(MX35_PIN_FEC_TX_CLK, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_RX_CLK, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_RX_DV, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_COL, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_RDATA0, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_TDATA0, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_TX_EN, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_MDC, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_MDIO, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_TX_ERR, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_RX_ERR, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_CRS, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_RDATA1, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_TDATA1, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_RDATA2, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_TDATA2, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_RDATA3, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_TDATA3, MUX_CONFIG_FUNC);
+ static const iomux_v3_cfg_t fec_pads[] = {
+ MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+ MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+ MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+ MX35_PAD_FEC_COL__FEC_COL,
+ MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+ MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+ MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+ MX35_PAD_FEC_MDC__FEC_MDC,
+ MX35_PAD_FEC_MDIO__FEC_MDIO,
+ MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+ MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+ MX35_PAD_FEC_CRS__FEC_CRS,
+ MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+ MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+ MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+ MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+ MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+ MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+ };
+ /* setup pins for FEC */
+ imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
}
int board_early_init_f(void)
@@ -229,7 +234,7 @@
(struct ccm_regs *)IMX_CCM_BASE;
/* setup GPIO3_1 to set HighVCore signal */
- mxc_request_iomux(MX35_PIN_ATA_DA1, MUX_CONFIG_ALT5);
+ imx_iomux_v3_setup_pad(MX35_PAD_ATA_DA1__GPIO3_1);
gpio_direction_output(65, 1);
/* initialize PLL and clock configuration */
diff --git a/board/ti/omap2420h4/Makefile b/board/Seagate/goflexhome/Makefile
similarity index 69%
copy from board/ti/omap2420h4/Makefile
copy to board/Seagate/goflexhome/Makefile
index cddd7e6..9948fe2 100644
--- a/board/ti/omap2420h4/Makefile
+++ b/board/Seagate/goflexhome/Makefile
@@ -1,6 +1,13 @@
#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com>
+#
+# Based on dockstar/Makefile originally written by
+# Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu>
+#
+# Based on sheevaplug/Makefile originally written by
+# Prafulla Wadaskar <prafulla@marvell.com>
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
#
# See file CREDITS for list of people who contributed to this
# project.
@@ -12,21 +19,20 @@
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301 USA
#
include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
-COBJS := omap2420h4.o mem.o sys_info.o
-SOBJS := lowlevel_init.o
+COBJS := goflexhome.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/Seagate/goflexhome/goflexhome.c b/board/Seagate/goflexhome/goflexhome.c
new file mode 100644
index 0000000..17c1905
--- /dev/null
+++ b/board/Seagate/goflexhome/goflexhome.c
@@ -0,0 +1,189 @@
+/*
+ * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com>
+ *
+ * Based on dockstar.c originally written by
+ * Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu>
+ *
+ * Based on sheevaplug.c originally written by
+ * Prafulla Wadaskar <prafulla@marvell.com>
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <miiphy.h>
+#include <asm/arch/kirkwood.h>
+#include <asm/arch/mpp.h>
+#include <asm/arch/cpu.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+ /* Multi-Purpose Pins Functionality configuration */
+ static const u32 kwmpp_config[] = {
+ MPP0_NF_IO2,
+ MPP1_NF_IO3,
+ MPP2_NF_IO4,
+ MPP3_NF_IO5,
+ MPP4_NF_IO6,
+ MPP5_NF_IO7,
+ MPP6_SYSRST_OUTn,
+ MPP7_GPO,
+ MPP8_UART0_RTS,
+ MPP9_UART0_CTS,
+ MPP10_UART0_TXD,
+ MPP11_UART0_RXD,
+ MPP12_SD_CLK,
+ MPP13_SD_CMD,
+ MPP14_SD_D0,
+ MPP15_SD_D1,
+ MPP16_SD_D2,
+ MPP17_SD_D3,
+ MPP18_NF_IO0,
+ MPP19_NF_IO1,
+ MPP20_GPIO,
+ MPP21_GPIO,
+ MPP22_GPIO,
+ MPP23_GPIO,
+ MPP24_GPIO,
+ MPP25_GPIO,
+ MPP26_GPIO,
+ MPP27_GPIO,
+ MPP28_GPIO,
+ MPP29_TSMP9,
+ MPP30_GPIO,
+ MPP31_GPIO,
+ MPP32_GPIO,
+ MPP33_GPIO,
+ MPP34_GPIO,
+ MPP35_GPIO,
+ MPP36_GPIO,
+ MPP37_GPIO,
+ MPP38_GPIO,
+ MPP39_GPIO,
+ MPP40_GPIO,
+ MPP41_GPIO,
+ MPP42_GPIO,
+ MPP43_GPIO,
+ MPP44_GPIO,
+ MPP45_GPIO,
+ MPP46_GPIO,
+ MPP47_GPIO,
+ MPP48_GPIO,
+ MPP49_GPIO,
+ 0
+ };
+
+ /*
+ * default gpio configuration
+ * There are maximum 64 gpios controlled through 2 sets of registers
+ * the below configuration configures mainly initial LED status
+ */
+ kw_config_gpio(GOFLEXHOME_OE_VAL_LOW,
+ GOFLEXHOME_OE_VAL_HIGH,
+ GOFLEXHOME_OE_LOW, GOFLEXHOME_OE_HIGH);
+ kirkwood_mpp_conf(kwmpp_config, NULL);
+ return 0;
+}
+
+int board_init(void)
+{
+ /*
+ * arch number of board
+ */
+ gd->bd->bi_arch_number = MACH_TYPE_GOFLEXHOME;
+
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
+
+ return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+/* Configure and enable MV88E1116 PHY */
+void reset_phy(void)
+{
+ u16 reg;
+ u16 devadr;
+ char *name = "egiga0";
+
+ if (miiphy_set_current_dev(name))
+ return;
+
+ /* command to read PHY dev address */
+ if (miiphy_read(name, 0xEE, 0xEE, (u16 *)&devadr)) {
+ printf("Err..%s could not read PHY dev address\n",
+ __func__);
+ return;
+ }
+
+ /*
+ * Enable RGMII delay on Tx and Rx for CPU port
+ * Ref: sec 4.7.2 of chip datasheet
+ */
+ miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2);
+ miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, ®);
+ reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
+ miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg);
+ miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
+
+ /* reset the phy */
+ miiphy_reset(name, devadr);
+
+ printf("88E1116 Initialized on %s\n", name);
+}
+#endif /* CONFIG_RESET_PHY_R */
+
+#define GREEN_LED (1 << 14)
+#define ORANGE_LED (1 << 15)
+#define BOTH_LEDS (GREEN_LED | ORANGE_LED)
+#define NEITHER_LED 0
+
+static void set_leds(u32 leds, u32 blinking)
+{
+ struct kwgpio_registers *r;
+ u32 oe;
+ u32 bl;
+
+ r = (struct kwgpio_registers *)KW_GPIO1_BASE;
+ oe = readl(&r->oe) | BOTH_LEDS;
+ writel(oe & ~leds, &r->oe); /* active low */
+ bl = readl(&r->blink_en) & ~BOTH_LEDS;
+ writel(bl | blinking, &r->blink_en);
+}
+
+void show_boot_progress(int val)
+{
+ switch (val) {
+ case BOOTSTAGE_ID_RUN_OS: /* booting Linux */
+ set_leds(BOTH_LEDS, NEITHER_LED);
+ break;
+ case BOOTSTAGE_ID_NET_ETH_START: /* Ethernet initialization */
+ set_leds(GREEN_LED, GREEN_LED);
+ break;
+ default:
+ if (val < 0) /* error */
+ set_leds(ORANGE_LED, ORANGE_LED);
+ break;
+ }
+}
diff --git a/board/Seagate/goflexhome/kwbimage.cfg b/board/Seagate/goflexhome/kwbimage.cfg
new file mode 100644
index 0000000..e984d72
--- /dev/null
+++ b/board/Seagate/goflexhome/kwbimage.cfg
@@ -0,0 +1,168 @@
+#
+# Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com>
+#
+# Based on dockstar/kwbimage.cfg originally written by
+# Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu>
+#
+# Based on sheevaplug/kwbimage.cfg originally written by
+# Prafulla Wadaskar <prafulla@marvell.com>
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301 USA
+#
+# Refer docs/README.kwimage for more details about how-to configure
+# and create kirkwood boot image
+#
+
+# Boot Media configurations
+BOOT_FROM nand
+NAND_ECC_MODE default
+NAND_PAGE_SIZE 0x0800
+
+# SOC registers configuration using bootrom header extension
+# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
+
+# Configure RGMII-0 interface pad voltage to 1.8V
+DATA 0xFFD100e0 0x1b1b1b9b
+
+#Dram initalization for SINGLE x16 CL=5 @ 400MHz
+DATA 0xFFD01400 0x43000c30 # DDR Configuration register
+# bit13-0: 0xc30 (3120 DDR2 clks refresh rate)
+# bit23-14: zero
+# bit24: 1= enable exit self refresh mode on DDR access
+# bit25: 1 required
+# bit29-26: zero
+# bit31-30: 01
+
+DATA 0xFFD01404 0x37543000 # DDR Controller Control Low
+# bit 4: 0=addr/cmd in smame cycle
+# bit 5: 0=clk is driven during self refresh, we don't care for APX
+# bit 6: 0=use recommended falling edge of clk for addr/cmd
+# bit14: 0=input buffer always powered up
+# bit18: 1=cpu lock transaction enabled
+# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0
+# bit27-24: 7= CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM
+# bit30-28: 3 required
+# bit31: 0=no additional STARTBURST delay
+
+DATA 0xFFD01408 0x22125451 # DDR Timing (Low) (active cycles value +1)
+# bit3-0: TRAS lsbs
+# bit7-4: TRCD
+# bit11- 8: TRP
+# bit15-12: TWR
+# bit19-16: TWTR
+# bit20: TRAS msb
+# bit23-21: 0x0
+# bit27-24: TRRD
+# bit31-28: TRTP
+
+DATA 0xFFD0140C 0x00000a33 # DDR Timing (High)
+# bit6-0: TRFC
+# bit8-7: TR2R
+# bit10-9: TR2W
+# bit12-11: TW2W
+# bit31-13: zero required
+
+DATA 0xFFD01410 0x0000000d # DDR Address Control
+# bit1-0: 00, Cs0width=x8
+# bit3-2: 11, Cs0size=1Gb
+# bit5-4: 00, Cs1width=nonexistent
+# bit7-6: 00, Cs1size =nonexistent
+# bit9-8: 00, Cs2width=nonexistent
+# bit11-10: 00, Cs2size =nonexistent
+# bit13-12: 00, Cs3width=nonexistent
+# bit15-14: 00, Cs3size =nonexistent
+# bit16: 0, Cs0AddrSel
+# bit17: 0, Cs1AddrSel
+# bit18: 0, Cs2AddrSel
+# bit19: 0, Cs3AddrSel
+# bit31-20: 0 required
+
+DATA 0xFFD01414 0x00000000 # DDR Open Pages Control
+# bit0: 0, OpenPage enabled
+# bit31-1: 0 required
+
+DATA 0xFFD01418 0x00000000 # DDR Operation
+# bit3-0: 0x0, DDR cmd
+# bit31-4: 0 required
+
+DATA 0xFFD0141C 0x00000C52 # DDR Mode
+# bit2-0: 2, BurstLen=2 required
+# bit3: 0, BurstType=0 required
+# bit6-4: 4, CL=5
+# bit7: 0, TestMode=0 normal
+# bit8: 0, DLL reset=0 normal
+# bit11-9: 6, auto-precharge write recovery ????????????
+# bit12: 0, PD must be zero
+# bit31-13: 0 required
+
+DATA 0xFFD01420 0x00000040 # DDR Extended Mode
+# bit0: 0, DDR DLL enabled
+# bit1: 0, DDR drive strenght normal
+# bit2: 0, DDR ODT control lsd (disabled)
+# bit5-3: 000, required
+# bit6: 1, DDR ODT control msb, (disabled)
+# bit9-7: 000, required
+# bit10: 0, differential DQS enabled
+# bit11: 0, required
+# bit12: 0, DDR output buffer enabled
+# bit31-13: 0 required
+
+DATA 0xFFD01424 0x0000F17F # DDR Controller Control High
+# bit2-0: 111, required
+# bit3 : 1 , MBUS Burst Chop disabled
+# bit6-4: 111, required
+# bit7 : 0
+# bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >= 300MHz
+# bit9 : 0 , no half clock cycle addition to dataout
+# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals
+# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh
+# bit15-12: 1111 required
+# bit31-16: 0 required
+
+DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing (default values)
+DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing (default values)
+
+DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0
+DATA 0xFFD01504 0x07FFFFF1 # CS[0]n Size
+# bit0: 1, Window enabled
+# bit1: 0, Write Protect disabled
+# bit3-2: 00, CS0 hit selected
+# bit23-4: ones, required
+# bit31-24: 0x07, Size (i.e. 128MB)
+
+DATA 0xFFD01508 0x10000000 # CS[1]n Base address to 256Mb
+DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled
+
+DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled
+DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled
+
+DATA 0xFFD01494 0x00030000 # DDR ODT Control (Low)
+DATA 0xFFD01498 0x00000000 # DDR ODT Control (High)
+# bit1-0: 00, ODT0 controlled by ODT Control (low) register above
+# bit3-2: 01, ODT1 active NEVER!
+# bit31-4: zero, required
+
+DATA 0xFFD0149C 0x0000E803 # CPU ODT Control
+DATA 0xFFD01480 0x00000001 # DDR Initialization Control
+#bit0=1, enable DDR init upon this register write
+
+# End of Header extension
+DATA 0x0 0x0
diff --git a/board/ait/cam_enc_4xx/cam_enc_4xx.c b/board/ait/cam_enc_4xx/cam_enc_4xx.c
index 644c445..80a7822 100644
--- a/board/ait/cam_enc_4xx/cam_enc_4xx.c
+++ b/board/ait/cam_enc_4xx/cam_enc_4xx.c
@@ -120,7 +120,7 @@
#ifdef CONFIG_NAND_DAVINCI
static int
davinci_std_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int page)
+ uint8_t *buf, int oob_required, int page)
{
struct nand_chip *this = mtd->priv;
int i, eccsize = chip->ecc.size;
@@ -167,8 +167,9 @@
return 0;
}
-static void davinci_std_write_page_syndrome(struct mtd_info *mtd,
- struct nand_chip *chip, const uint8_t *buf)
+static int davinci_std_write_page_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip, const uint8_t *buf,
+ int oob_required)
{
unsigned char davinci_ecc_buf[NAND_MAX_OOBSIZE];
struct nand_chip *this = mtd->priv;
@@ -218,6 +219,7 @@
i = mtd->oobsize - (oob - chip->oob_poi);
if (i)
chip->write_buf(mtd, oob, i);
+ return 0;
}
static int davinci_std_write_oob_syndrome(struct mtd_info *mtd,
@@ -239,7 +241,7 @@
}
static int davinci_std_read_oob_syndrome(struct mtd_info *mtd,
- struct nand_chip *chip, int page, int sndcmd)
+ struct nand_chip *chip, int page)
{
struct nand_chip *this = mtd->priv;
uint8_t *buf = chip->oob_poi;
@@ -249,7 +251,7 @@
chip->read_buf(mtd, bufpoi, mtd->oobsize);
- return 1;
+ return 0;
}
static void nand_dm365evm_select_chip(struct mtd_info *mtd, int chip)
diff --git a/board/armltd/vexpress/Makefile b/board/armltd/vexpress/Makefile
index 8749590..6719f3d 100644
--- a/board/armltd/vexpress/Makefile
+++ b/board/armltd/vexpress/Makefile
@@ -25,7 +25,7 @@
LIB = $(obj)lib$(BOARD).o
-COBJS := ca9x4_ct_vxp.o
+COBJS := vexpress_common.o
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/armltd/vexpress/ca9x4_ct_vxp.c b/board/armltd/vexpress/vexpress_common.c
similarity index 89%
rename from board/armltd/vexpress/ca9x4_ct_vxp.c
rename to board/armltd/vexpress/vexpress_common.c
index d5e109e..2c54869 100644
--- a/board/armltd/vexpress/ca9x4_ct_vxp.c
+++ b/board/armltd/vexpress/vexpress_common.c
@@ -45,8 +45,7 @@
static ulong timestamp;
static ulong lastdec;
-static struct wdt *wdt_base = (struct wdt *)WDT_BASE;
-static struct systimer *systimer_base = (struct systimer *)SYSTIMER_BASE;
+static struct systimer *systimer_base = (struct systimer *)V2M_TIMER01;
static struct sysctrl *sysctrl_base = (struct sysctrl *)SCTL_BASE;
static void flash__init(void);
@@ -166,20 +165,38 @@
*/
writel(SYSTIMER_RELOAD, &systimer_base->timer0load);
writel(SYSTIMER_RELOAD, &systimer_base->timer0value);
- writel(SYSTIMER_EN | SYSTIMER_32BIT | \
- readl(&systimer_base->timer0control), \
+ writel(SYSTIMER_EN | SYSTIMER_32BIT |
+ readl(&systimer_base->timer0control),
&systimer_base->timer0control);
reset_timer_masked();
}
+int v2m_cfg_write(u32 devfn, u32 data)
+{
+ /* Configuration interface broken? */
+ u32 val;
+
+ devfn |= SYS_CFG_START | SYS_CFG_WRITE;
+
+ val = readl(V2M_SYS_CFGSTAT);
+ writel(val & ~SYS_CFG_COMPLETE, V2M_SYS_CFGSTAT);
+
+ writel(data, V2M_SYS_CFGDATA);
+ writel(devfn, V2M_SYS_CFGCTRL);
+
+ do {
+ val = readl(V2M_SYS_CFGSTAT);
+ } while (val == 0);
+
+ return !!(val & SYS_CFG_ERR);
+}
+
/* Use the ARM Watchdog System to cause reset */
void reset_cpu(ulong addr)
{
- writeb(WDT_EN, &wdt_base->wdogcontrol);
- writel(WDT_RESET_LOAD, &wdt_base->wdogload);
- while (1)
- ;
+ if (v2m_cfg_write(SYS_CFG_REBOOT | SYS_CFG_SITE_MB, 0))
+ printf("Unable to reboot\n");
}
/*
@@ -251,7 +268,7 @@
return get_timer(0);
}
-ulong get_tbclk (void)
+ulong get_tbclk(void)
{
return (ulong)CONFIG_SYS_HZ;
}
diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c
index 3aa394a..8d3fc75 100644
--- a/board/atmel/at91sam9260ek/at91sam9260ek.c
+++ b/board/atmel/at91sam9260ek/at91sam9260ek.c
@@ -30,6 +30,7 @@
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
+#include <atmel_mci.h>
#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
# include <net.h>
@@ -143,6 +144,15 @@
}
#endif
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+int board_mmc_init(bd_t *bd)
+{
+ at91_mci_hw_init();
+
+ return atmel_mci_init((void *)ATMEL_BASE_MCI);
+}
+#endif
+
int board_early_init_f(void)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
@@ -157,18 +167,6 @@
int board_init(void)
{
-#ifdef CONFIG_AT91SAM9G20EK_2MMC
- /* arch number of AT91SAM9G20EK_2MMC-Board */
- gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK_2MMC;
-#else
-#ifdef CONFIG_AT91SAM9G20EK
- /* arch number of AT91SAM9G20EK-Board */
- gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK;
-#else
- /* arch number of AT91SAM9260EK-Board */
- gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9260EK;
-#endif
-#endif
/* adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
diff --git a/board/ti/omap2420h4/Makefile b/board/atmel/at91sam9n12ek/Makefile
similarity index 74%
copy from board/ti/omap2420h4/Makefile
copy to board/atmel/at91sam9n12ek/Makefile
index cddd7e6..3aa67d5 100644
--- a/board/ti/omap2420h4/Makefile
+++ b/board/atmel/at91sam9n12ek/Makefile
@@ -1,7 +1,15 @@
#
-# (C) Copyright 2000-2006
+# (C) Copyright 2003-2008
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop@leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# (C) Copyright 2013
+# Josh Wu <josh.wu@atmel.com>
+# Atmel corporation <www.atmel.com>
+#
# See file CREDITS for list of people who contributed to this
# project.
#
@@ -12,7 +20,7 @@
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
@@ -25,11 +33,10 @@
LIB = $(obj)lib$(BOARD).o
-COBJS := omap2420h4.o mem.o sys_info.o
-SOBJS := lowlevel_init.o
+COBJS-y += at91sam9n12ek.o
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
diff --git a/board/atmel/at91sam9n12ek/at91sam9n12ek.c b/board/atmel/at91sam9n12ek/at91sam9n12ek.c
new file mode 100644
index 0000000..8752794
--- /dev/null
+++ b/board/atmel/at91sam9n12ek/at91sam9n12ek.c
@@ -0,0 +1,228 @@
+/*
+ * (C) Copyright 2013 Atmel Corporation
+ * Josh Wu <josh.wu@atmel.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/at91sam9x5_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/at91_pio.h>
+#include <asm/arch/clk.h>
+#include <lcd.h>
+#include <atmel_hlcdc.h>
+#include <atmel_mci.h>
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+#ifdef CONFIG_NAND_ATMEL
+static void at91sam9n12ek_nand_hw_init(void)
+{
+ struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+ struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
+ unsigned long csa;
+
+ /* Assign CS3 to NAND/SmartMedia Interface */
+ csa = readl(&matrix->ebicsa);
+ csa |= AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA;
+ /* Configure databus */
+ csa &= ~AT91_MATRIX_NFD0_ON_D16; /* nandflash connect to D0~D15 */
+ /* Configure IO drive */
+ csa &= ~AT91_MATRIX_EBI_EBI_IOSR_NORMAL;
+
+ writel(csa, &matrix->ebicsa);
+
+ /* Configure SMC CS3 for NAND/SmartMedia */
+ writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
+ AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0),
+ &smc->cs[3].setup);
+ writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(5) |
+ AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(6),
+ &smc->cs[3].pulse);
+ writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(7),
+ &smc->cs[3].cycle);
+ writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+ AT91_SMC_MODE_EXNW_DISABLE |
+#ifdef CONFIG_SYS_NAND_DBW_16
+ AT91_SMC_MODE_DBW_16 |
+#else /* CONFIG_SYS_NAND_DBW_8 */
+ AT91_SMC_MODE_DBW_8 |
+#endif
+ AT91_SMC_MODE_TDF_CYCLE(1),
+ &smc->cs[3].mode);
+
+ /* Configure RDY/BSY pin */
+ at91_set_pio_input(AT91_PIO_PORTD, 5, 1);
+
+ /* Configure ENABLE pin for NandFlash */
+ at91_set_pio_output(AT91_PIO_PORTD, 4, 1);
+
+ at91_set_a_periph(AT91_PIO_PORTD, 0, 1); /* NAND OE */
+ at91_set_a_periph(AT91_PIO_PORTD, 1, 1); /* NAND WE */
+ at91_set_a_periph(AT91_PIO_PORTD, 2, 1); /* ALE */
+ at91_set_a_periph(AT91_PIO_PORTD, 3, 1); /* CLE */
+}
+#endif
+
+#ifdef CONFIG_LCD
+vidinfo_t panel_info = {
+ .vl_col = 480,
+ .vl_row = 272,
+ .vl_clk = 9000000,
+ .vl_bpix = LCD_BPP,
+ .vl_sync = 0,
+ .vl_tft = 1,
+ .vl_hsync_len = 5,
+ .vl_left_margin = 8,
+ .vl_right_margin = 43,
+ .vl_vsync_len = 10,
+ .vl_upper_margin = 4,
+ .vl_lower_margin = 12,
+ .mmio = ATMEL_BASE_LCDC,
+};
+
+void lcd_enable(void)
+{
+ at91_set_pio_output(AT91_PIO_PORTC, 25, 0); /* power up */
+}
+
+void lcd_disable(void)
+{
+ at91_set_pio_output(AT91_PIO_PORTC, 25, 1); /* power down */
+}
+
+#ifdef CONFIG_LCD_INFO
+void lcd_show_board_info(void)
+{
+ ulong dram_size, nand_size;
+ int i;
+ char temp[32];
+
+ lcd_printf("%s\n", U_BOOT_VERSION);
+ lcd_printf("ATMEL Corp\n");
+ lcd_printf("at91@atmel.com\n");
+ lcd_printf("%s CPU at %s MHz\n",
+ ATMEL_CPU_NAME,
+ strmhz(temp, get_cpu_clk_rate()));
+
+ dram_size = 0;
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+ dram_size += gd->bd->bi_dram[i].size;
+ nand_size = 0;
+ for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+ nand_size += nand_info[i].size;
+ lcd_printf(" %ld MB SDRAM, %ld MB NAND\n",
+ dram_size >> 20,
+ nand_size >> 20);
+}
+#endif /* CONFIG_LCD_INFO */
+#endif /* CONFIG_LCD */
+
+/* SPI chip select control */
+#ifdef CONFIG_ATMEL_SPI
+#include <spi.h>
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ return bus == 0 && cs < 2;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+ switch (slave->cs) {
+ case 0:
+ at91_set_pio_output(AT91_PIO_PORTA, 14, 0);
+ break;
+ case 1:
+ at91_set_pio_output(AT91_PIO_PORTA, 7, 0);
+ break;
+ }
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ switch (slave->cs) {
+ case 0:
+ at91_set_pio_output(AT91_PIO_PORTA, 14, 1);
+ break;
+ case 1:
+ at91_set_pio_output(AT91_PIO_PORTA, 7, 1);
+ break;
+ }
+}
+#endif /* CONFIG_ATMEL_SPI */
+
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+int board_mmc_init(bd_t *bd)
+{
+ at91_mci_hw_init();
+
+ return atmel_mci_init((void *)ATMEL_BASE_HSMCI0);
+}
+#endif
+
+int board_early_init_f(void)
+{
+ /* Enable clocks for all PIOs */
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+ writel((1 << ATMEL_ID_PIOAB) | (1 << ATMEL_ID_PIOCD), &pmc->pcer);
+
+ at91_seriald_hw_init();
+ return 0;
+}
+
+int board_init(void)
+{
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+#ifdef CONFIG_NAND_ATMEL
+ at91sam9n12ek_nand_hw_init();
+#endif
+
+#ifdef CONFIG_ATMEL_SPI
+ at91_spi0_hw_init(1 << 0);
+#endif
+
+#ifdef CONFIG_LCD
+ at91_lcd_hw_init();
+#endif
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_SDRAM_SIZE);
+ return 0;
+}
diff --git a/board/ti/omap2420h4/Makefile b/board/atmel/sama5d3xek/Makefile
similarity index 77%
rename from board/ti/omap2420h4/Makefile
rename to board/atmel/sama5d3xek/Makefile
index cddd7e6..45d24d2 100644
--- a/board/ti/omap2420h4/Makefile
+++ b/board/atmel/sama5d3xek/Makefile
@@ -1,7 +1,14 @@
#
-# (C) Copyright 2000-2006
+# (C) Copyright 2003-2008
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
+# (C) Copyright 2008
+# Stelian Pop <stelian@popies.net>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# (C) Copyright 2013
+# Bo Shen <voice.shen@atmel.com>
+#
# See file CREDITS for list of people who contributed to this
# project.
#
@@ -12,7 +19,7 @@
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
@@ -25,11 +32,10 @@
LIB = $(obj)lib$(BOARD).o
-COBJS := omap2420h4.o mem.o sys_info.o
-SOBJS := lowlevel_init.o
+COBJS-y += sama5d3xek.o
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c
new file mode 100644
index 0000000..541296d
--- /dev/null
+++ b/board/atmel/sama5d3xek/sama5d3xek.c
@@ -0,0 +1,275 @@
+/*
+ * Copyright (C) 2012 - 2013 Atmel Corporation
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mmc.h>
+#include <asm/io.h>
+#include <asm/arch/sama5d3_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/clk.h>
+#include <lcd.h>
+#include <atmel_lcdc.h>
+#include <atmel_mci.h>
+#include <net.h>
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+#ifdef CONFIG_NAND_ATMEL
+void sama5d3xek_nand_hw_init(void)
+{
+ struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+
+ at91_periph_clk_enable(ATMEL_ID_SMC);
+
+ /* Configure SMC CS3 for NAND/SmartMedia */
+ writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(1) |
+ AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(1),
+ &smc->cs[3].setup);
+ writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(5) |
+ AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(5),
+ &smc->cs[3].pulse);
+ writel(AT91_SMC_CYCLE_NWE(8) | AT91_SMC_CYCLE_NRD(8),
+ &smc->cs[3].cycle);
+ writel(AT91_SMC_TIMINGS_TCLR(3) | AT91_SMC_TIMINGS_TADL(10) |
+ AT91_SMC_TIMINGS_TAR(3) | AT91_SMC_TIMINGS_TRR(4) |
+ AT91_SMC_TIMINGS_TWB(5) | AT91_SMC_TIMINGS_RBNSEL(3)|
+ AT91_SMC_TIMINGS_NFSEL(1), &smc->cs[3].timings);
+ writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+ AT91_SMC_MODE_EXNW_DISABLE |
+#ifdef CONFIG_SYS_NAND_DBW_16
+ AT91_SMC_MODE_DBW_16 |
+#else /* CONFIG_SYS_NAND_DBW_8 */
+ AT91_SMC_MODE_DBW_8 |
+#endif
+ AT91_SMC_MODE_TDF_CYCLE(3),
+ &smc->cs[3].mode);
+}
+#endif
+
+#ifdef CONFIG_CMD_USB
+static void sama5d3xek_usb_hw_init(void)
+{
+ at91_set_pio_output(AT91_PIO_PORTD, 25, 0);
+ at91_set_pio_output(AT91_PIO_PORTD, 26, 0);
+ at91_set_pio_output(AT91_PIO_PORTD, 27, 0);
+}
+#endif
+
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+static void sama5d3xek_mci_hw_init(void)
+{
+ at91_mci_hw_init();
+
+ at91_set_pio_output(AT91_PIO_PORTB, 10, 0); /* MCI0 Power */
+}
+#endif
+
+#ifdef CONFIG_LCD
+vidinfo_t panel_info = {
+ .vl_col = 800,
+ .vl_row = 480,
+ .vl_clk = 24000000,
+ .vl_sync = ATMEL_LCDC_INVLINE_NORMAL | ATMEL_LCDC_INVFRAME_NORMAL,
+ .vl_bpix = LCD_BPP,
+ .vl_tft = 1,
+ .vl_hsync_len = 128,
+ .vl_left_margin = 64,
+ .vl_right_margin = 64,
+ .vl_vsync_len = 2,
+ .vl_upper_margin = 22,
+ .vl_lower_margin = 21,
+ .mmio = ATMEL_BASE_LCDC,
+};
+
+void lcd_enable(void)
+{
+}
+
+void lcd_disable(void)
+{
+}
+
+static void sama5d3xek_lcd_hw_init(void)
+{
+ gd->fb_base = CONFIG_SAMA5D3_LCD_BASE;
+
+ /* The higher 8 bit of LCD is board related */
+ at91_set_c_periph(AT91_PIO_PORTC, 14, 0); /* LCDD16 */
+ at91_set_c_periph(AT91_PIO_PORTC, 13, 0); /* LCDD17 */
+ at91_set_c_periph(AT91_PIO_PORTC, 12, 0); /* LCDD18 */
+ at91_set_c_periph(AT91_PIO_PORTC, 11, 0); /* LCDD19 */
+ at91_set_c_periph(AT91_PIO_PORTC, 10, 0); /* LCDD20 */
+ at91_set_c_periph(AT91_PIO_PORTC, 15, 0); /* LCDD21 */
+ at91_set_c_periph(AT91_PIO_PORTE, 27, 0); /* LCDD22 */
+ at91_set_c_periph(AT91_PIO_PORTE, 28, 0); /* LCDD23 */
+
+ /* Configure lower 16 bit of LCD and enable clock */
+ at91_lcd_hw_init();
+}
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+
+void lcd_show_board_info(void)
+{
+ ulong dram_size, nand_size;
+ int i;
+ char temp[32];
+
+ lcd_printf("%s\n", U_BOOT_VERSION);
+ lcd_printf("(C) 2013 ATMEL Corp\n");
+ lcd_printf("at91@atmel.com\n");
+ lcd_printf("%s CPU at %s MHz\n", get_cpu_name(),
+ strmhz(temp, get_cpu_clk_rate()));
+
+ dram_size = 0;
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+ dram_size += gd->bd->bi_dram[i].size;
+
+ nand_size = 0;
+#ifdef CONFIG_NAND_ATMEL
+ for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+ nand_size += nand_info[i].size;
+#endif
+ lcd_printf("%ld MB SDRAM, %ld MB NAND\n",
+ dram_size >> 20, nand_size >> 20);
+}
+#endif /* CONFIG_LCD_INFO */
+#endif /* CONFIG_LCD */
+
+int board_early_init_f(void)
+{
+ at91_seriald_hw_init();
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+#ifdef CONFIG_NAND_ATMEL
+ sama5d3xek_nand_hw_init();
+#endif
+#ifdef CONFIG_CMD_USB
+ sama5d3xek_usb_hw_init();
+#endif
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+ sama5d3xek_mci_hw_init();
+#endif
+#ifdef CONFIG_ATMEL_SPI
+ at91_spi0_hw_init(1 << 0);
+#endif
+#ifdef CONFIG_MACB
+ if (has_emac())
+ at91_macb_hw_init();
+#endif
+#ifdef CONFIG_LCD
+ if (has_lcdc())
+ sama5d3xek_lcd_hw_init();
+#endif
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_SDRAM_SIZE);
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+
+#ifdef CONFIG_MACB
+ if (has_emac())
+ rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00);
+#endif
+
+ return rc;
+}
+
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+int board_mmc_init(bd_t *bis)
+{
+ int rc = 0;
+
+ rc = atmel_mci_init((void *)ATMEL_BASE_MCI0);
+
+ return rc;
+}
+#endif
+
+/* SPI chip select control */
+#ifdef CONFIG_ATMEL_SPI
+#include <spi.h>
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ return bus == 0 && cs < 4;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+ switch (slave->cs) {
+ case 0:
+ at91_set_pio_output(AT91_PIO_PORTD, 13, 0);
+ case 1:
+ at91_set_pio_output(AT91_PIO_PORTD, 14, 0);
+ case 2:
+ at91_set_pio_output(AT91_PIO_PORTD, 15, 0);
+ case 3:
+ at91_set_pio_output(AT91_PIO_PORTD, 16, 0);
+ default:
+ break;
+ }
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ switch (slave->cs) {
+ case 0:
+ at91_set_pio_output(AT91_PIO_PORTD, 13, 1);
+ case 1:
+ at91_set_pio_output(AT91_PIO_PORTD, 14, 1);
+ case 2:
+ at91_set_pio_output(AT91_PIO_PORTD, 15, 1);
+ case 3:
+ at91_set_pio_output(AT91_PIO_PORTD, 16, 1);
+ default:
+ break;
+ }
+}
+#endif /* CONFIG_ATMEL_SPI */
diff --git a/board/boundary/nitrogen6x/clocks.cfg b/board/boundary/nitrogen6x/clocks.cfg
index e7d1f86..0a3b47b 100644
--- a/board/boundary/nitrogen6x/clocks.cfg
+++ b/board/boundary/nitrogen6x/clocks.cfg
@@ -44,3 +44,14 @@
/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
DATA 4, MX6_IOMUXC_GPR6, 0x007F007F
DATA 4, MX6_IOMUXC_GPR7, 0x007F007F
+
+/*
+ * Setup CCM_CCOSR register as follows:
+ *
+ * cko1_en = 1 --> CKO1 enabled
+ * cko1_div = 111 --> divide by 8
+ * cko1_sel = 1011 --> ahb_clk_root
+ *
+ * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz
+ */
+DATA 4, CCM_CCOSR, 0x000000fb
diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c
index cc071d6..8f0f9b8 100644
--- a/board/boundary/nitrogen6x/nitrogen6x.c
+++ b/board/boundary/nitrogen6x/nitrogen6x.c
@@ -47,40 +47,34 @@
DECLARE_GLOBAL_DATA_PTR;
-#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
+ PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
- PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
+ PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
+ PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-#define ENET_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
-#define SPI_PAD_CTRL (PAD_CTL_HYS | \
- PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_MED | \
+#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
-#define BUTTON_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+#define BUTTON_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
-#define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
+#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
PAD_CTL_ODE | PAD_CTL_SRE_FAST)
-#define WEAK_PULLUP (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
+#define WEAK_PULLUP (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
PAD_CTL_SRE_SLOW)
-#define WEAK_PULLDOWN (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
- PAD_CTL_SRE_SLOW)
+#define WEAK_PULLDOWN (PAD_CTL_PUS_100K_DOWN | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
+ PAD_CTL_HYS | PAD_CTL_SRE_SLOW)
#define OUTPUT_40OHM (PAD_CTL_SPEED_MED|PAD_CTL_DSE_40ohm)
@@ -342,7 +336,6 @@
void setup_spi(void)
{
- gpio_direction_output(CONFIG_SF_DEFAULT_CS, 1);
imx_iomux_v3_setup_multiple_pads(ecspi1_pads,
ARRAY_SIZE(ecspi1_pads));
}
diff --git a/board/cm_t35/Makefile b/board/compulab/cm_t35/Makefile
similarity index 81%
rename from board/cm_t35/Makefile
rename to board/compulab/cm_t35/Makefile
index bde56e6..31d9bbb 100644
--- a/board/cm_t35/Makefile
+++ b/board/compulab/cm_t35/Makefile
@@ -1,6 +1,8 @@
#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# (C) Copyright 2011 - 2013 CompuLab, Ltd. <www.compulab.co.il>
+#
+# Authors: Nikita Kiryanov <nikita@compulab.co.il>
+# Igor Grinberg <grinberg@compulab.co.il>
#
# See file CREDITS for list of people who contributed to this
# project.
@@ -17,9 +19,7 @@
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
+# Foundation, Inc.
include $(TOPDIR)/config.mk
@@ -42,3 +42,5 @@
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/cm_t35/cm_t35.c b/board/compulab/cm_t35/cm_t35.c
similarity index 96%
rename from board/cm_t35/cm_t35.c
rename to board/compulab/cm_t35/cm_t35.c
index 84c36ba..b0b80e5 100644
--- a/board/cm_t35/cm_t35.c
+++ b/board/compulab/cm_t35/cm_t35.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2011 CompuLab, Ltd. <www.compulab.co.il>
+ * (C) Copyright 2011 - 2013 CompuLab, Ltd. <www.compulab.co.il>
*
* Authors: Mike Rapoport <mike@compulab.co.il>
* Igor Grinberg <grinberg@compulab.co.il>
@@ -448,7 +448,7 @@
{
u8 val;
- if (twl4030_i2c_read_u8(TWL4030_CHIP_GPIO, &val, TWL4030_BASEADD_GPIO))
+ if (twl4030_i2c_read_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO, &val))
return -1;
return !(val & 1);
@@ -493,17 +493,17 @@
static void reset_net_chip(void)
{
/* Set GPIO1 of TPS65930 as output */
- twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
- TWL4030_BASEADD_GPIO + 0x03);
+ twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO + 0x03,
+ 0x02);
/* Send a pulse on the GPIO pin */
- twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
- TWL4030_BASEADD_GPIO + 0x0C);
+ twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO + 0x0C,
+ 0x02);
udelay(1);
- twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
- TWL4030_BASEADD_GPIO + 0x09);
+ twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO + 0x09,
+ 0x02);
mdelay(40);
- twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
- TWL4030_BASEADD_GPIO + 0x0C);
+ twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO + 0x0C,
+ 0x02);
mdelay(1);
}
#else
@@ -597,13 +597,13 @@
udelay(1000);
offset = TWL4030_BASEADD_GPIO + TWL4030_GPIO_GPIODATADIR1;
- twl4030_i2c_read_u8(TWL4030_CHIP_GPIO, &val, offset);
+ twl4030_i2c_read_u8(TWL4030_CHIP_GPIO, offset, &val);
/* Set GPIO6 and GPIO7 of TPS65930 as output */
val |= 0xC0;
- twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, val, offset);
+ twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, offset, val);
offset = TWL4030_BASEADD_GPIO + TWL4030_GPIO_SETGPIODATAOUT1;
/* Take both PHYs out of reset */
- twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0xC0, offset);
+ twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, offset, 0xC0);
udelay(1);
return omap_ehci_hcd_init(&usbhs_bdata, hccr, hcor);
diff --git a/board/cm_t35/display.c b/board/compulab/cm_t35/display.c
similarity index 99%
rename from board/cm_t35/display.c
rename to board/compulab/cm_t35/display.c
index a004ea1..adc4853 100644
--- a/board/cm_t35/display.c
+++ b/board/compulab/cm_t35/display.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2012 CompuLab, Ltd. <www.compulab.co.il>
+ * (C) Copyright 2012 - 2013 CompuLab, Ltd. <www.compulab.co.il>
*
* Authors: Nikita Kiryanov <nikita@compulab.co.il>
*
diff --git a/board/cm_t35/eeprom.c b/board/compulab/cm_t35/eeprom.c
similarity index 100%
rename from board/cm_t35/eeprom.c
rename to board/compulab/cm_t35/eeprom.c
diff --git a/board/cm_t35/eeprom.h b/board/compulab/cm_t35/eeprom.h
similarity index 100%
rename from board/cm_t35/eeprom.h
rename to board/compulab/cm_t35/eeprom.h
diff --git a/board/cm_t35/leds.c b/board/compulab/cm_t35/leds.c
similarity index 94%
rename from board/cm_t35/leds.c
rename to board/compulab/cm_t35/leds.c
index 48ad598..dcae135 100644
--- a/board/cm_t35/leds.c
+++ b/board/compulab/cm_t35/leds.c
@@ -1,6 +1,5 @@
/*
- * (C) Copyright 2011
- * CompuLab, Ltd. <www.compulab.co.il>
+ * (C) Copyright 2011 - 2013 CompuLab, Ltd. <www.compulab.co.il>
*
* Author: Igor Grinberg <grinberg@compulab.co.il>
*
diff --git a/board/cm_t35/Makefile b/board/congatec/cgtqmx6eval/Makefile
similarity index 69%
copy from board/cm_t35/Makefile
copy to board/congatec/cgtqmx6eval/Makefile
index bde56e6..ac16c1f 100644
--- a/board/cm_t35/Makefile
+++ b/board/congatec/cgtqmx6eval/Makefile
@@ -1,9 +1,8 @@
#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
#
-# See file CREDITS for list of people who contributed to this
-# project.
+# (C) Copyright 2011 Freescale Semiconductor, Inc.
+# (C) Copyright 2013 Adeneo Embedded <www.adeneo-embedded.com>
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
@@ -23,17 +22,14 @@
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).o
+LIB = $(obj)lib$(BOARD).o
-COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += eeprom.o
-COBJS-$(CONFIG_LCD) += display.o
+COBJS := cgtqmx6eval.o
-COBJS := cm_t35.o leds.o $(COBJS-y)
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
-SRCS := $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-
-$(LIB): $(obj).depend $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(call cmd_link_o_target, $(OBJS))
#########################################################################
@@ -42,3 +38,5 @@
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/congatec/cgtqmx6eval/README b/board/congatec/cgtqmx6eval/README
new file mode 100644
index 0000000..bbf0f75
--- /dev/null
+++ b/board/congatec/cgtqmx6eval/README
@@ -0,0 +1,29 @@
+U-Boot for the Congatec Conga-QEVAl Evaluation Carrier board with
+qmx6 quad module.
+
+This file contains information for the port of U-Boot to the Congatec
+Conga-QEVAl Evaluation Carrier board with qmx6 quad module.
+
+1. Boot source, boot from SD card
+---------------------------------
+
+This version of u-boot works only on the SD card. By default, the
+Congatec board can boot only from the SPI-NOR.
+But, with the u-boot version provided with the board you can write boot
+registers to force the board to reboot and boot from the SD slot. If
+"bmode" command is not available from your pre-installed u-boot, these
+instruction will produce the same effect:
+
+conga-QMX6 U-Boot > mw.l 0x20d8040 0x3850
+conga-QMX6 U-Boot > mw.l 0x020d8044 0x10000000
+conga-QMX6 U-Boot > reset
+resetting ...
+
+The the board will reboot and, if you have written your SD correctly
+the board will use u-boot that live into the SD
+
+To copy the resulting u-boot.imx to the SD card:
+
+ dd if=u-boot.imx of=/dev/xxx bs=512 seek=2
+
+Note: Replace xxx with the device representing the SD card in your system.
diff --git a/board/congatec/cgtqmx6eval/cgtqmx6eval.c b/board/congatec/cgtqmx6eval/cgtqmx6eval.c
new file mode 100644
index 0000000..f70f674
--- /dev/null
+++ b/board/congatec/cgtqmx6eval/cgtqmx6eval.c
@@ -0,0 +1,167 @@
+/*
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ * Based on mx6qsabrelite.c file
+ * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
+ * Leo Sartre, <lsartre@adeneo-embedded.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/boot_mode.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |\
+ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW |\
+ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
+
+ return 0;
+}
+
+iomux_v3_cfg_t const uart2_pads[] = {
+ MX6_PAD_EIM_D26__UART2_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_EIM_D27__UART2_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+iomux_v3_cfg_t const usdhc2_pads[] = {
+ MX6_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DAT0__USDHC2_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DAT1__USDHC2_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DAT2__USDHC2_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DAT3__USDHC2_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_GPIO_4__GPIO_1_4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+};
+
+iomux_v3_cfg_t const usdhc4_pads[] = {
+ MX6_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT1__USDHC4_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT2__USDHC4_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT3__USDHC4_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT4__USDHC4_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT5__USDHC4_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT6__USDHC4_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT7__USDHC4_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NANDF_D6__GPIO_2_6 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
+};
+
+static void setup_iomux_uart(void)
+{
+ imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
+}
+
+#ifdef CONFIG_FSL_ESDHC
+struct fsl_esdhc_cfg usdhc_cfg[] = {
+ {USDHC2_BASE_ADDR},
+ {USDHC4_BASE_ADDR},
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ int ret = 0;
+
+ switch (cfg->esdhc_base) {
+ case USDHC2_BASE_ADDR:
+ gpio_direction_input(IMX_GPIO_NR(1, 4));
+ ret = !gpio_get_value(IMX_GPIO_NR(1, 4));
+ break;
+ case USDHC4_BASE_ADDR:
+ gpio_direction_input(IMX_GPIO_NR(2, 6));
+ ret = !gpio_get_value(IMX_GPIO_NR(2, 6));
+ break;
+ default:
+ printf("Bad USDHC interface\n");
+ }
+
+ return ret;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ s32 status = 0;
+
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+ usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
+
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
+
+ status = fsl_esdhc_initialize(bis, &usdhc_cfg[0]) |
+ fsl_esdhc_initialize(bis, &usdhc_cfg[1]);
+
+ return status;
+}
+#endif
+
+int board_early_init_f(void)
+{
+ setup_iomux_uart();
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ puts("Board: Conga-QEVAL QMX6 Quad\n");
+
+ return 0;
+}
+
+#ifdef CONFIG_CMD_BMODE
+static const struct boot_mode board_boot_modes[] = {
+ /* 4 bit bus width */
+ {"mmc0", MAKE_CFGVAL(0x50, 0x20, 0x00, 0x00)},
+ {"mmc1", MAKE_CFGVAL(0x50, 0x38, 0x00, 0x00)},
+ {NULL, 0},
+};
+#endif
+
+int misc_init_r(void)
+{
+#ifdef CONFIG_CMD_BMODE
+ add_board_boot_modes(board_boot_modes);
+#endif
+ return 0;
+}
diff --git a/board/davinci/da8xxevm/da830evm.c b/board/davinci/da8xxevm/da830evm.c
index c45c94b..a4e9254 100644
--- a/board/davinci/da8xxevm/da830evm.c
+++ b/board/davinci/da8xxevm/da830evm.c
@@ -39,135 +39,43 @@
#include <asm/arch/hardware.h>
#include <asm/arch/emif_defs.h>
#include <asm/arch/emac_defs.h>
+#include <asm/arch/pinmux_defs.h>
#include <asm/io.h>
#include <nand.h>
#include <asm/arch/nand_defs.h>
#include <asm/arch/davinci_misc.h>
-DECLARE_GLOBAL_DATA_PTR;
-
-/* SPI0 pin muxer settings */
-static const struct pinmux_config spi0_pins[] = {
- { pinmux(7), 1, 3 },
- { pinmux(7), 1, 4 },
- { pinmux(7), 1, 5 },
- { pinmux(7), 1, 6 },
- { pinmux(7), 1, 7 }
-};
-
-/* EMIF-A bus pins for 8-bit NAND support on CS3 */
-static const struct pinmux_config emifa_nand_pins[] = {
- { pinmux(13), 1, 6 },
- { pinmux(13), 1, 7 },
- { pinmux(14), 1, 0 },
- { pinmux(14), 1, 1 },
- { pinmux(14), 1, 2 },
- { pinmux(14), 1, 3 },
- { pinmux(14), 1, 4 },
- { pinmux(14), 1, 5 },
- { pinmux(15), 1, 7 },
- { pinmux(16), 1, 0 },
- { pinmux(18), 1, 1 },
- { pinmux(18), 1, 4 },
- { pinmux(18), 1, 5 },
-};
-
-/* EMAC PHY interface pins */
-static const struct pinmux_config emac_pins[] = {
- { pinmux(9), 0, 5 },
- { pinmux(10), 2, 1 },
- { pinmux(10), 2, 2 },
- { pinmux(10), 2, 3 },
- { pinmux(10), 2, 4 },
- { pinmux(10), 2, 5 },
- { pinmux(10), 2, 6 },
- { pinmux(10), 2, 7 },
- { pinmux(11), 2, 0 },
- { pinmux(11), 2, 1 },
-};
-
-/* UART pin muxer settings */
-static const struct pinmux_config uart_pins[] = {
- { pinmux(8), 2, 7 },
- { pinmux(9), 2, 0 }
-};
-
-/* I2C pin muxer settings */
-static const struct pinmux_config i2c_pins[] = {
- { pinmux(8), 2, 3 },
- { pinmux(8), 2, 4 }
-};
-
-#ifdef CONFIG_USE_NAND
-/* NAND pin muxer settings */
-const struct pinmux_config aemif_pins[] = {
- { pinmux(13), 1, 6 },
- { pinmux(13), 1, 7 },
- { pinmux(14), 1, 0 },
- { pinmux(14), 1, 1 },
- { pinmux(14), 1, 2 },
- { pinmux(14), 1, 3 },
- { pinmux(14), 1, 4 },
- { pinmux(14), 1, 5 },
- { pinmux(14), 1, 6 },
- { pinmux(14), 1, 7 },
- { pinmux(15), 1, 0 },
- { pinmux(15), 1, 1 },
- { pinmux(15), 1, 2 },
- { pinmux(15), 1, 3 },
- { pinmux(15), 1, 4 },
- { pinmux(15), 1, 5 },
- { pinmux(15), 1, 6 },
- { pinmux(15), 1, 7 },
- { pinmux(16), 1, 0 },
- { pinmux(16), 1, 1 },
- { pinmux(16), 1, 2 },
- { pinmux(16), 1, 3 },
- { pinmux(16), 1, 4 },
- { pinmux(16), 1, 5 },
- { pinmux(16), 1, 6 },
- { pinmux(16), 1, 7 },
- { pinmux(17), 1, 0 },
- { pinmux(17), 1, 1 },
- { pinmux(17), 1, 2 },
- { pinmux(17), 1, 3 },
- { pinmux(17), 1, 4 },
- { pinmux(17), 1, 5 },
- { pinmux(17), 1, 6 },
- { pinmux(17), 1, 7 },
- { pinmux(18), 1, 0 },
- { pinmux(18), 1, 1 },
- { pinmux(18), 1, 2 },
- { pinmux(18), 1, 3 },
- { pinmux(18), 1, 4 },
- { pinmux(18), 1, 5 },
- { pinmux(18), 1, 6 },
- { pinmux(18), 1, 7 },
- { pinmux(10), 1, 0 }
-};
+#ifdef CONFIG_DAVINCI_MMC
+#include <mmc.h>
+#include <asm/arch/sdmmc_defs.h>
#endif
-
-/* USB0_DRVVBUS pin muxer settings */
-static const struct pinmux_config usb_pins[] = {
- { pinmux(9), 1, 1 }
-};
+DECLARE_GLOBAL_DATA_PTR;
static const struct pinmux_resource pinmuxes[] = {
#ifdef CONFIG_SPI_FLASH
- PINMUX_ITEM(spi0_pins),
+ PINMUX_ITEM(spi0_pins_base),
+ PINMUX_ITEM(spi0_pins_scs0),
+ PINMUX_ITEM(spi0_pins_ena),
#endif
- PINMUX_ITEM(uart_pins),
- PINMUX_ITEM(i2c_pins),
+ PINMUX_ITEM(uart2_pins_txrx),
+ PINMUX_ITEM(i2c0_pins),
#ifdef CONFIG_USB_DA8XX
PINMUX_ITEM(usb_pins),
#endif
#ifdef CONFIG_USE_NAND
- PINMUX_ITEM(emifa_nand_pins),
- PINMUX_ITEM(aemif_pins),
+ PINMUX_ITEM(emifa_pins),
+ PINMUX_ITEM(emifa_pins_cs0),
+ PINMUX_ITEM(emifa_pins_cs2),
+ PINMUX_ITEM(emifa_pins_cs3),
#endif
#if defined(CONFIG_DRIVER_TI_EMAC)
- PINMUX_ITEM(emac_pins),
+ PINMUX_ITEM(emac_pins_rmii),
+ PINMUX_ITEM(emac_pins_mdio),
+ PINMUX_ITEM(emac_pins_rmii_clk_source),
+#endif
+#ifdef CONFIG_DAVINCI_MMC
+ PINMUX_ITEM(mmc0_pins_8bit)
#endif
};
@@ -177,8 +85,31 @@
{ DAVINCI_LPSC_EMAC }, /* image download */
{ DAVINCI_LPSC_UART2 }, /* console */
{ DAVINCI_LPSC_GPIO },
+#ifdef CONFIG_DAVINCI_MMC
+ { DAVINCI_LPSC_MMC_SD },
+#endif
+
};
+#ifdef CONFIG_DAVINCI_MMC
+static struct davinci_mmc mmc_sd0 = {
+ .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE,
+ .host_caps = MMC_MODE_8BIT,
+ .voltages = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .version = MMC_CTLR_VERSION_2,
+};
+
+int board_mmc_init(bd_t *bis)
+{
+ mmc_sd0.input_clk = clk_get(DAVINCI_MMCSD_CLKID);
+
+ printf("%x\n", mmc_sd0.input_clk);
+
+ /* Add slot-0 to mmc subsystem */
+ return davinci_mmc_init(bis, &mmc_sd0);
+}
+#endif
+
int board_init(void)
{
#ifndef CONFIG_USE_IRQ
diff --git a/board/cm_t35/Makefile b/board/denx/m53evk/Makefile
similarity index 78%
copy from board/cm_t35/Makefile
copy to board/denx/m53evk/Makefile
index bde56e6..bfb040a 100644
--- a/board/cm_t35/Makefile
+++ b/board/denx/m53evk/Makefile
@@ -1,9 +1,6 @@
#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
+# DENX M53EVK
+# Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
@@ -25,10 +22,7 @@
LIB = $(obj)lib$(BOARD).o
-COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += eeprom.o
-COBJS-$(CONFIG_LCD) += display.o
-
-COBJS := cm_t35.o leds.o $(COBJS-y)
+COBJS := m53evk.o
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
@@ -42,3 +36,5 @@
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/denx/m53evk/imximage.cfg b/board/denx/m53evk/imximage.cfg
new file mode 100644
index 0000000..27c593a
--- /dev/null
+++ b/board/denx/m53evk/imximage.cfg
@@ -0,0 +1,108 @@
+/*
+ * DENX M53 DRAM init values
+ * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+#include <asm/imx-common/imximage.cfg>
+
+/* image version */
+IMAGE_VERSION 2
+
+
+/* Boot Offset 0x400, valid for both SD and NAND boot. */
+BOOT_OFFSET FLASH_OFFSET_STANDARD
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
+DATA 4 0x53fa86f4 0x00000000 /* GRP_DDRMODE_CTL */
+DATA 4 0x53fa8714 0x00000000 /* GRP_DDRMODE */
+DATA 4 0x53fa86fc 0x00000000 /* GRP_DDRPKE */
+DATA 4 0x53fa8724 0x04000000 /* GRP_DDR_TYPE */
+
+DATA 4 0x53fa872c 0x00300000 /* GRP_B3DS */
+DATA 4 0x53fa8554 0x00300000 /* DRAM_DQM3 */
+DATA 4 0x53fa8558 0x00300040 /* DRAM_SDQS3 */
+
+DATA 4 0x53fa8728 0x00300000 /* GRP_B2DS */
+DATA 4 0x53fa8560 0x00300000 /* DRAM_DQM2 */
+DATA 4 0x53fa8568 0x00300040 /* DRAM_SDQS2 */
+
+DATA 4 0x53fa871c 0x00300000 /* GRP_B1DS */
+DATA 4 0x53fa8594 0x00300000 /* DRAM_DQM1 */
+DATA 4 0x53fa8590 0x00300040 /* DRAM_SDQS1 */
+
+DATA 4 0x53fa8718 0x00300000 /* GRP_B0DS */
+DATA 4 0x53fa8584 0x00300000 /* DRAM_DQM0 */
+DATA 4 0x53fa857c 0x00300040 /* DRAM_SDQS0 */
+
+DATA 4 0x53fa8578 0x00300000 /* DRAM_SDCLK_0 */
+DATA 4 0x53fa8570 0x00300000 /* DRAM_SDCLK_1 */
+
+DATA 4 0x53fa8574 0x00300000 /* DRAM_CAS */
+DATA 4 0x53fa8588 0x00300000 /* DRAM_RAS */
+DATA 4 0x53fa86f0 0x00300000 /* GRP_ADDDS */
+DATA 4 0x53fa8720 0x00300000 /* GRP_CTLDS */
+
+DATA 4 0x53fa8564 0x00300040 /* DRAM_SDODT1 */
+DATA 4 0x53fa8580 0x00300040 /* DRAM_SDODT0 */
+
+/* ESDCTL */
+DATA 4 0x63fd9088 0x32383535
+DATA 4 0x63fd9090 0x40383538
+DATA 4 0x63fd907c 0x0136014d
+DATA 4 0x63fd9080 0x01510141
+
+DATA 4 0x63fd9018 0x00011740
+DATA 4 0x63fd9000 0xc3190000
+DATA 4 0x63fd900c 0x555952e3
+DATA 4 0x63fd9010 0xb68e8b63
+DATA 4 0x63fd9014 0x01ff00db
+DATA 4 0x63fd902c 0x000026d2
+DATA 4 0x63fd9030 0x009f0e21
+DATA 4 0x63fd9008 0x12273030
+DATA 4 0x63fd9004 0x0002002d
+DATA 4 0x63fd901c 0x00008032
+DATA 4 0x63fd901c 0x00008033
+DATA 4 0x63fd901c 0x00028031
+DATA 4 0x63fd901c 0x092080b0
+DATA 4 0x63fd901c 0x04008040
+DATA 4 0x63fd901c 0x0000803a
+DATA 4 0x63fd901c 0x0000803b
+DATA 4 0x63fd901c 0x00028039
+DATA 4 0x63fd901c 0x09208138
+DATA 4 0x63fd901c 0x04008048
+DATA 4 0x63fd9020 0x00001800
+DATA 4 0x63fd9040 0x04b80003
+DATA 4 0x63fd9058 0x00022227
+DATA 4 0x63fd901c 0x00000000
diff --git a/board/denx/m53evk/m53evk.c b/board/denx/m53evk/m53evk.c
new file mode 100644
index 0000000..12917fd
--- /dev/null
+++ b/board/denx/m53evk/m53evk.c
@@ -0,0 +1,328 @@
+/*
+ * DENX M53 module
+ *
+ * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/iomux-mx53.h>
+#include <asm/arch/spl.h>
+#include <asm/errno.h>
+#include <netdev.h>
+#include <i2c.h>
+#include <mmc.h>
+#include <spl.h>
+#include <fsl_esdhc.h>
+#include <asm/gpio.h>
+#include <usb/ehci-fsl.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+ u32 size1, size2;
+
+ size1 = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
+ size2 = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
+
+ gd->ram_size = size1 + size2;
+
+ return 0;
+}
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+ gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+}
+
+static void setup_iomux_uart(void)
+{
+ static const iomux_v3_cfg_t uart_pads[] = {
+ MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
+ MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
+ };
+
+ imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
+}
+
+#ifdef CONFIG_USB_EHCI_MX5
+int board_ehci_hcd_init(int port)
+{
+ if (port == 0) {
+ /* USB OTG PWRON */
+ imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_4__GPIO1_4,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH));
+ gpio_direction_output(IMX_GPIO_NR(1, 4), 0);
+
+ /* USB OTG Over Current */
+ imx_iomux_v3_setup_pad(MX53_PAD_GPIO_18__GPIO7_13);
+ } else if (port == 1) {
+ /* USB Host PWRON */
+ imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_2__GPIO1_2,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH));
+ gpio_direction_output(IMX_GPIO_NR(1, 2), 0);
+
+ /* USB Host Over Current */
+ imx_iomux_v3_setup_pad(MX53_PAD_GPIO_3__USBOH3_USBH1_OC);
+ }
+
+ return 0;
+}
+#endif
+
+static void setup_iomux_fec(void)
+{
+ static const iomux_v3_cfg_t fec_pads[] = {
+ /* MDIO pads */
+ NEW_PAD_CTRL(MX53_PAD_FEC_MDIO__FEC_MDIO, PAD_CTL_HYS |
+ PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP | PAD_CTL_ODE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_MDC__FEC_MDC, PAD_CTL_DSE_HIGH),
+
+ /* FEC 0 pads */
+ NEW_PAD_CTRL(MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_RX_ER__FEC_RX_ER,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_TX_EN__FEC_TX_EN, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_FEC_RXD0__FEC_RDATA_0,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_RXD1__FEC_RDATA_1,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_TXD0__FEC_TDATA_0, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_FEC_TXD1__FEC_TDATA_1, PAD_CTL_DSE_HIGH),
+
+ /* FEC 1 pads */
+ NEW_PAD_CTRL(MX53_PAD_KEY_COL0__FEC_RDATA_3,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_KEY_ROW0__FEC_TX_ER,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_KEY_COL1__FEC_RX_CLK,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_KEY_ROW1__FEC_COL,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_KEY_COL2__FEC_RDATA_2,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_KEY_ROW2__FEC_TDATA_2, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_KEY_COL3__FEC_CRS,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_GPIO_19__FEC_TDATA_3, PAD_CTL_DSE_HIGH),
+ };
+
+ imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
+}
+
+#ifdef CONFIG_FSL_ESDHC
+struct fsl_esdhc_cfg esdhc_cfg = {
+ MMC_SDHC1_BASE_ADDR,
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ imx_iomux_v3_setup_pad(MX53_PAD_GPIO_1__GPIO1_1);
+ gpio_direction_input(IMX_GPIO_NR(1, 1));
+
+ return !gpio_get_value(IMX_GPIO_NR(1, 1));
+}
+
+#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_PUS_100K_UP)
+#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \
+ PAD_CTL_DSE_HIGH)
+
+int board_mmc_init(bd_t *bis)
+{
+ static const iomux_v3_cfg_t sd1_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL),
+ MX53_PAD_EIM_DA13__GPIO3_13,
+
+ MX53_PAD_EIM_EB3__GPIO2_31, /* SD power */
+ };
+
+ esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+
+ imx_iomux_v3_setup_multiple_pads(sd1_pads, ARRAY_SIZE(sd1_pads));
+
+ /* GPIO 2_31 is SD power */
+ gpio_direction_output(IMX_GPIO_NR(2, 31), 0);
+
+ return fsl_esdhc_initialize(bis, &esdhc_cfg);
+}
+#endif
+
+#define I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
+
+static void setup_iomux_i2c(void)
+{
+ static const iomux_v3_cfg_t i2c_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_EIM_D16__I2C2_SDA, I2C_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_EIM_EB2__I2C2_SCL, I2C_PAD_CTRL),
+ };
+
+ imx_iomux_v3_setup_multiple_pads(i2c_pads, ARRAY_SIZE(i2c_pads));
+}
+
+static void setup_iomux_nand(void)
+{
+ static const iomux_v3_cfg_t nand_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B,
+ PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B,
+ PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_NANDF_CLE__EMI_NANDF_CLE,
+ PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_NANDF_ALE__EMI_NANDF_ALE,
+ PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B,
+ PAD_CTL_PUS_100K_UP),
+ NEW_PAD_CTRL(MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0,
+ PAD_CTL_PUS_100K_UP),
+ NEW_PAD_CTRL(MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0,
+ PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA0__EMI_NANDF_D_0,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA1__EMI_NANDF_D_1,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA2__EMI_NANDF_D_2,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA3__EMI_NANDF_D_3,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA4__EMI_NANDF_D_4,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA5__EMI_NANDF_D_5,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA6__EMI_NANDF_D_6,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA7__EMI_NANDF_D_7,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+ };
+
+ imx_iomux_v3_setup_multiple_pads(nand_pads, ARRAY_SIZE(nand_pads));
+}
+
+static void m53_set_clock(void)
+{
+ int ret;
+ const uint32_t ref_clk = MXC_HCLK;
+ const uint32_t dramclk = 400;
+ uint32_t cpuclk;
+
+ imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_10__GPIO4_0,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE));
+ gpio_direction_input(IMX_GPIO_NR(4, 0));
+
+ /* GPIO10 selects modules' CPU speed, 1 = 1200MHz ; 0 = 800MHz */
+ cpuclk = gpio_get_value(IMX_GPIO_NR(4, 0)) ? 1200 : 800;
+
+ ret = mxc_set_clock(ref_clk, cpuclk, MXC_ARM_CLK);
+ if (ret)
+ printf("CPU: Switch CPU clock to %dMHz failed\n", cpuclk);
+
+ ret = mxc_set_clock(ref_clk, dramclk, MXC_PERIPH_CLK);
+ if (ret) {
+ printf("CPU: Switch peripheral clock to %dMHz failed\n",
+ dramclk);
+ }
+
+ ret = mxc_set_clock(ref_clk, dramclk, MXC_DDR_CLK);
+ if (ret)
+ printf("CPU: Switch DDR clock to %dMHz failed\n", dramclk);
+}
+
+static void m53_set_nand(void)
+{
+ u32 i;
+
+ /* NAND flash is muxed on ATA pins */
+ setbits_le32(M4IF_BASE_ADDR + 0xc, M4IF_GENP_WEIM_MM_MASK);
+
+ /* Wait for Grant/Ack sequence (see EIM_CSnGCR2:MUX16_BYP_GRANT) */
+ for (i = 0x4; i < 0x94; i += 0x18) {
+ clrbits_le32(WEIM_BASE_ADDR + i,
+ WEIM_GCR2_MUX16_BYP_GRANT_MASK);
+ }
+
+ mxc_set_clock(0, 33, MXC_NFC_CLK);
+ enable_nfc_clk(1);
+}
+
+int board_early_init_f(void)
+{
+ setup_iomux_uart();
+ setup_iomux_fec();
+ setup_iomux_i2c();
+ setup_iomux_nand();
+
+ m53_set_clock();
+
+ mxc_set_sata_internal_clock();
+
+ /* NAND clock @ 33MHz */
+ m53_set_nand();
+
+ return 0;
+}
+
+int board_init(void)
+{
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ puts("Board: DENX M53EVK\n");
+
+ return 0;
+}
+
+/*
+ * NAND SPL
+ */
+#ifdef CONFIG_SPL_BUILD
+void spl_board_init(void)
+{
+ setup_iomux_nand();
+ m53_set_clock();
+ m53_set_nand();
+}
+
+u32 spl_boot_device(void)
+{
+ return BOOT_DEVICE_NAND;
+}
+#endif
diff --git a/board/esg/ima3-mx53/ima3-mx53.c b/board/esg/ima3-mx53/ima3-mx53.c
index 41d6bb6..051fa6e 100644
--- a/board/esg/ima3-mx53/ima3-mx53.c
+++ b/board/esg/ima3-mx53/ima3-mx53.c
@@ -23,11 +23,10 @@
#include <common.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
-#include <asm/arch/mx5x_pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/clock.h>
-#include <asm/arch/iomux.h>
+#include <asm/arch/iomux-mx53.h>
#include <asm/errno.h>
#include <netdev.h>
#include <mmc.h>
@@ -66,109 +65,53 @@
return 0;
}
+#define UART_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
+
static void setup_iomux_uart(void)
{
- /* UART4 RXD */
- mxc_request_iomux(MX53_PIN_CSI0_D13, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX53_PIN_CSI0_D13,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE |
- PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_ENABLE);
- mxc_iomux_set_input(MX53_UART4_IPP_UART_RXD_MUX_SELECT_INPUT, 0x3);
+ static const iomux_v3_cfg_t uart_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_CSI0_DAT13__UART4_RXD_MUX, UART_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_CSI0_DAT12__UART4_TXD_MUX, UART_PAD_CTRL),
+ };
- /* UART4 TXD */
- mxc_request_iomux(MX53_PIN_CSI0_D12, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX53_PIN_CSI0_D12,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE |
- PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_ENABLE);
+ imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
}
static void setup_iomux_fec(void)
{
- /*FEC_MDIO*/
- mxc_request_iomux(MX53_PIN_FEC_MDIO, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_MDIO,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | PAD_CTL_22K_PU |
- PAD_CTL_ODE_OPENDRAIN_ENABLE);
- mxc_iomux_set_input(MX53_FEC_FEC_MDI_SELECT_INPUT, 0x1);
+ static const iomux_v3_cfg_t fec_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_FEC_MDIO__FEC_MDIO, PAD_CTL_HYS |
+ PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP | PAD_CTL_ODE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_MDC__FEC_MDC, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_KEY_COL0__FEC_RDATA_3,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_KEY_COL2__FEC_RDATA_2,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_RXD1__FEC_RDATA_1,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_RXD0__FEC_RDATA_0,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_GPIO_19__FEC_TDATA_3, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_KEY_ROW2__FEC_TDATA_2, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_FEC_TXD1__FEC_TDATA_1, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_FEC_TXD0__FEC_TDATA_0, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_FEC_TX_EN__FEC_TX_EN, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_RX_ER__FEC_RX_ER,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_KEY_COL3__FEC_CRS,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_KEY_ROW1__FEC_COL,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_KEY_COL1__FEC_RX_CLK,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ };
- /*FEC_MDC*/
- mxc_request_iomux(MX53_PIN_FEC_MDC, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_MDC, PAD_CTL_DRV_HIGH);
-
- /* FEC RXD3 */
- mxc_request_iomux(MX53_PIN_KEY_COL0, IOMUX_CONFIG_ALT6);
- mxc_iomux_set_pad(MX53_PIN_KEY_COL0, PAD_CTL_HYS_ENABLE |
- PAD_CTL_PKE_ENABLE);
-
- /* FEC RXD2 */
- mxc_request_iomux(MX53_PIN_KEY_COL2, IOMUX_CONFIG_ALT6);
- mxc_iomux_set_pad(MX53_PIN_KEY_COL2, PAD_CTL_HYS_ENABLE |
- PAD_CTL_PKE_ENABLE);
-
- /* FEC RXD1 */
- mxc_request_iomux(MX53_PIN_FEC_RXD1, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_RXD1, PAD_CTL_HYS_ENABLE |
- PAD_CTL_PKE_ENABLE);
-
- /* FEC RXD0 */
- mxc_request_iomux(MX53_PIN_FEC_RXD0, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_RXD0, PAD_CTL_HYS_ENABLE |
- PAD_CTL_PKE_ENABLE);
-
- /* FEC TXD3 */
- mxc_request_iomux(MX53_PIN_GPIO_19, IOMUX_CONFIG_ALT6);
- mxc_iomux_set_pad(MX53_PIN_GPIO_19, PAD_CTL_DRV_HIGH);
-
- /* FEC TXD2 */
- mxc_request_iomux(MX53_PIN_KEY_ROW2, IOMUX_CONFIG_ALT6);
- mxc_iomux_set_pad(MX53_PIN_KEY_ROW2, PAD_CTL_DRV_HIGH);
-
- /* FEC TXD1 */
- mxc_request_iomux(MX53_PIN_FEC_TXD1, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_TXD1, PAD_CTL_DRV_HIGH);
-
- /* FEC TXD0 */
- mxc_request_iomux(MX53_PIN_FEC_TXD0, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_TXD0, PAD_CTL_DRV_HIGH);
-
- /* FEC TX_EN */
- mxc_request_iomux(MX53_PIN_FEC_TX_EN, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_TX_EN, PAD_CTL_DRV_HIGH);
-
- /* FEC TX_CLK */
- mxc_request_iomux(MX53_PIN_FEC_REF_CLK, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_REF_CLK, PAD_CTL_HYS_ENABLE |
- PAD_CTL_PKE_ENABLE);
-
- /* FEC RX_ER */
- mxc_request_iomux(MX53_PIN_FEC_RX_ER, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_RX_ER, PAD_CTL_HYS_ENABLE |
- PAD_CTL_PKE_ENABLE);
-
- /* FEC RX_DV */
- mxc_request_iomux(MX53_PIN_FEC_CRS_DV, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_CRS_DV, PAD_CTL_HYS_ENABLE |
- PAD_CTL_PKE_ENABLE);
-
- /* FEC CRS */
- mxc_request_iomux(MX53_PIN_KEY_COL3, IOMUX_CONFIG_ALT6);
- mxc_iomux_set_pad(MX53_PIN_KEY_COL3, PAD_CTL_HYS_ENABLE |
- PAD_CTL_PKE_ENABLE);
-
- /* FEC COL */
- mxc_request_iomux(MX53_PIN_KEY_ROW1, IOMUX_CONFIG_ALT6);
- mxc_iomux_set_pad(MX53_PIN_KEY_ROW1, PAD_CTL_HYS_ENABLE |
- PAD_CTL_PKE_ENABLE);
- mxc_iomux_set_input(MX53_FEC_FEC_COL_SELECT_INPUT, 0x0);
-
- /* FEC RX_CLK */
- mxc_request_iomux(MX53_PIN_KEY_COL1, IOMUX_CONFIG_ALT6);
- mxc_iomux_set_pad(MX53_PIN_KEY_COL1, PAD_CTL_HYS_ENABLE |
- PAD_CTL_PKE_ENABLE);
- mxc_iomux_set_input(MX53_FEC_FEC_RX_CLK_SELECT_INPUT, 0x0);
+ imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
}
#ifdef CONFIG_FSL_ESDHC
@@ -178,76 +121,51 @@
{
int ret;
- ret = !gpio_get_value(IOMUX_TO_GPIO(MX53_PIN_GPIO_1));
+ ret = !gpio_get_value(IMX_GPIO_NR(1, 1));
return ret;
}
+#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_PUS_100K_UP)
+#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \
+ PAD_CTL_DSE_HIGH)
+#define SD_CD_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_HYS | PAD_CTL_PKE)
+
int board_mmc_init(bd_t *bis)
{
- mxc_request_iomux(MX53_PIN_SD1_CMD, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_SD1_CLK, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_SD1_DATA0, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_SD1_DATA1, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_SD1_DATA2, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_SD1_DATA3, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_GPIO_1, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX53_PIN_GPIO_1,
- PAD_CTL_DRV_HIGH | PAD_CTL_HYS_ENABLE |
- PAD_CTL_PUE_KEEPER | PAD_CTL_100K_PU |
- PAD_CTL_ODE_OPENDRAIN_NONE | PAD_CTL_PKE_ENABLE);
- gpio_direction_input(IOMUX_TO_GPIO(MX53_PIN_GPIO_1));
+ static const iomux_v3_cfg_t sd1_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_GPIO_1__GPIO1_1, SD_CD_PAD_CTRL),
+ };
- mxc_iomux_set_pad(MX53_PIN_SD1_CMD,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX53_PIN_SD1_CLK,
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE |
- PAD_CTL_47K_PU | PAD_CTL_DRV_HIGH);
- mxc_iomux_set_pad(MX53_PIN_SD1_DATA0,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
- mxc_iomux_set_pad(MX53_PIN_SD1_DATA1,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
- mxc_iomux_set_pad(MX53_PIN_SD1_DATA2,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
- mxc_iomux_set_pad(MX53_PIN_SD1_DATA3,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
+ imx_iomux_v3_setup_multiple_pads(sd1_pads, ARRAY_SIZE(sd1_pads));
+ gpio_direction_input(IMX_GPIO_NR(1, 1));
esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
return fsl_esdhc_initialize(bis, &esdhc_cfg);
}
#endif
+#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_47K_UP)
+
static void setup_iomux_spi(void)
{
- /* SCLK */
- mxc_request_iomux(MX53_PIN_CSI0_D8, IOMUX_CONFIG_ALT3);
- mxc_iomux_set_pad(MX53_PIN_CSI0_D8,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
- mxc_iomux_set_input(MX53_ECSPI2_IPP_CSPI_CLK_IN_SELECT_INPUT, 0x1);
- /* MOSI */
- mxc_request_iomux(MX53_PIN_CSI0_D9, IOMUX_CONFIG_ALT3);
- mxc_iomux_set_pad(MX53_PIN_CSI0_D9,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
- mxc_iomux_set_input(MX53_ECSPI2_IPP_IND_MOSI_SELECT_INPUT, 0x1);
- /* MISO */
- mxc_request_iomux(MX53_PIN_CSI0_D10, IOMUX_CONFIG_ALT3);
- mxc_iomux_set_pad(MX53_PIN_CSI0_D10,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
- mxc_iomux_set_input(MX53_ECSPI2_IPP_IND_MISO_SELECT_INPUT, 0x1);
- /* SSEL 0 */
- mxc_request_iomux(MX53_PIN_CSI0_D11, IOMUX_CONFIG_GPIO);
- mxc_iomux_set_pad(MX53_PIN_CSI0_D11,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
- gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_CSI0_D11), 1);
+ static const iomux_v3_cfg_t spi_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_CSI0_DAT8__ECSPI2_SCLK, SPI_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_CSI0_DAT9__ECSPI2_MOSI, SPI_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_CSI0_DAT10__ECSPI2_MISO, SPI_PAD_CTRL),
+ /* SSEL 0 */
+ NEW_PAD_CTRL(MX53_PAD_CSI0_DAT11__GPIO5_29, SPI_PAD_CTRL),
+ };
+
+ imx_iomux_v3_setup_multiple_pads(spi_pads, ARRAY_SIZE(spi_pads));
+ gpio_direction_output(IMX_GPIO_NR(5, 29), 1);
}
int board_early_init_f(void)
diff --git a/board/freescale/b4860qds/b4860qds.c b/board/freescale/b4860qds/b4860qds.c
index 41887c2..a39c17a 100644
--- a/board/freescale/b4860qds/b4860qds.c
+++ b/board/freescale/b4860qds/b4860qds.c
@@ -166,11 +166,13 @@
ret = select_i2c_ch_pca(I2C_CH_VSC3316);
if (!ret) {
ret = vsc3316_config(VSC3316_TX_ADDRESS,
- vsc16_tx_sgmii_lane_ab, num_vsc16_con);
+ vsc16_tx_4sfp_sgmii_12_56,
+ num_vsc16_con);
if (ret)
return ret;
ret = vsc3316_config(VSC3316_RX_ADDRESS,
- vsc16_rx_sgmii_lane_ab, num_vsc16_con);
+ vsc16_rx_4sfp_sgmii_12_56,
+ num_vsc16_con);
if (ret)
return ret;
} else {
diff --git a/board/freescale/b4860qds/b4860qds_crossbar_con.h b/board/freescale/b4860qds/b4860qds_crossbar_con.h
index 994dec5..c2b6c44 100644
--- a/board/freescale/b4860qds/b4860qds_crossbar_con.h
+++ b/board/freescale/b4860qds/b4860qds_crossbar_con.h
@@ -26,42 +26,53 @@
static const int8_t vsc16_tx_amc[8][2] = { {15, 3}, {0, 2}, {7, 4}, {9, 10},
{5, 11}, {4, 5}, {2, 6}, {12, 9} };
-static const int8_t vsc16_tx_sfp[8][2] = { {15, 8}, {0, 0}, {7, 7}, {9, 1},
- {5, 15}, {4, 14}, {2, 12}, {12, 13} };
+static const int8_t vsc16_tx_sfp[8][2] = { {15, 7}, {0, 1}, {7, 8}, {9, 0},
+ {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
-static const int8_t vsc16_tx_sgmii_lane_ab[8][2] = { {2, 14}, {12, 15},
- {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
+static const int8_t vsc16_tx_4sfp_sgmii_12_56[8][2] = { {15, 7}, {0, 1},
+ {7, 8}, {9, 0}, {2, 14}, {12, 15},
+ {-1, -1}, {-1, -1} };
+
+static const int8_t vsc16_tx_4sfp_sgmii_34[8][2] = { {15, 7}, {0, 1},
+ {7, 8}, {9, 0}, {5, 14}, {4, 15},
+ {-1, -1}, {-1, -1} };
#ifdef CONFIG_PPC_B4420
static const int8_t vsc16_tx_sgmii_lane_cd[8][2] = { {5, 14}, {4, 15},
{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
#endif
+
static const int8_t vsc16_tx_aurora[8][2] = { {2, 13}, {12, 12}, {-1, -1},
{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
static const int8_t vsc16_rx_amc[8][2] = { {3, 15}, {2, 1}, {4, 8}, {10, 9},
{11, 11}, {5, 10}, {6, 3}, {9, 12} };
-static const int8_t vsc16_rx_sfp[8][2] = { {0, 15}, {8, 1}, {1, 8}, {7, 9},
+static const int8_t vsc16_rx_sfp[8][2] = { {8, 15}, {0, 1}, {7, 8}, {1, 9},
{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
-static const int8_t vsc16_rx_sgmii_lane_ab[8][2] = { {14, 3}, {15, 12},
- {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
+static const int8_t vsc16_rx_4sfp_sgmii_12_56[8][2] = { {8, 15}, {0, 1},
+ {7, 8}, {1, 9}, {14, 3}, {15, 12},
+ {-1, -1}, {-1, -1} };
+
+static const int8_t vsc16_rx_4sfp_sgmii_34[8][2] = { {8, 15}, {0, 1},
+ {7, 8}, {1, 9}, {14, 11}, {15, 10},
+ {-1, -1}, {-1, -1} };
#ifdef CONFIG_PPC_B4420
static const int8_t vsc16_rx_sgmii_lane_cd[8][2] = { {14, 11}, {15, 10},
{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
#endif
-static const int8_t vsc16_rx_aurora[8][2] = { {12, 3}, {13, 12}, {-1, -1},
+static const int8_t vsc16_rx_aurora[8][2] = { {13, 3}, {12, 12}, {-1, -1},
{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
static const int8_t vsc08_tx_amc[4][2] = { {2, 2}, {3, 3}, {7, 4}, {1, 5} };
-static const int8_t vsc08_tx_sfp[4][2] = { {2, 6}, {3, 7}, {7, 1}, {1, 0} };
+static const int8_t vsc08_tx_sfp[4][2] = { {2, 1}, {3, 0}, {7, 6}, {1, 7} };
static const int8_t vsc08_rx_amc[4][2] = { {2, 3}, {3, 4}, {4, 7}, {5, 1} };
-static const int8_t vsc08_rx_sfp[4][2] = { {6, 3}, {7, 4}, {1, 7}, {0, 1} };
+static const int8_t vsc08_rx_sfp[4][2] = { {1, 3}, {0, 4}, {6, 7}, {7, 1} };
#endif
diff --git a/board/freescale/b4860qds/eth_b4860qds.c b/board/freescale/b4860qds/eth_b4860qds.c
index 68e2725..3bcda6d 100644
--- a/board/freescale/b4860qds/eth_b4860qds.c
+++ b/board/freescale/b4860qds/eth_b4860qds.c
@@ -275,6 +275,24 @@
fm_info_set_phy_address(FM1_DTSEC4,
CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR);
break;
+ case 0x98:
+ /* XAUI in Slot1 and Slot2 */
+ debug("Setting phy addresses on B4860 QDS AMC2PEX-2S for FM1_10GEC1: %x\n",
+ CONFIG_SYS_FM1_10GEC1_PHY_ADDR);
+ fm_info_set_phy_address(FM1_10GEC1,
+ CONFIG_SYS_FM1_10GEC1_PHY_ADDR);
+ debug("Setting phy addresses on B4860 QDS AMC2PEX-2S for FM1_10GEC2: %x\n",
+ CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
+ fm_info_set_phy_address(FM1_10GEC2,
+ CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
+ break;
+ case 0x9E:
+ /* XAUI in Slot2 */
+ debug("Setting phy addresses on B4860 QDS AMC2PEX-2S for FM1_10GEC2: %x\n",
+ CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
+ fm_info_set_phy_address(FM1_10GEC2,
+ CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
+ break;
default:
printf("Fman: Unsupported SerDes2 Protocol 0x%02x\n",
serdes2_prtcl);
@@ -300,6 +318,23 @@
}
}
+ for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) {
+ int idx = i - FM1_10GEC1;
+
+ switch (fm_info_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_XGMII:
+ fm_info_set_mdio(i,
+ miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME));
+ break;
+ default:
+ printf("Fman1: 10GSEC%u set to unknown interface %i\n",
+ idx + 1, fm_info_get_enet_if(i));
+ fm_info_set_phy_address(i, 0);
+ break;
+ }
+ }
+
+
cpu_eth_init(bis);
#endif
diff --git a/board/freescale/b4860qds/law.c b/board/freescale/b4860qds/law.c
index 4142e01..b26725b 100644
--- a/board/freescale/b4860qds/law.c
+++ b/board/freescale/b4860qds/law.c
@@ -33,8 +33,12 @@
SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN),
#endif
SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC),
+#ifdef CONFIG_SYS_MAPLE_MEM_PHYS
+ SET_LAW(CONFIG_SYS_MAPLE_MEM_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_MAPLE),
+#endif
#ifdef CONFIG_SYS_DCSRBAR_PHYS
- SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR),
+ /* Limit DCSR to 32M to access NPC Trace Buffer */
+ SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR),
#endif
#ifdef CONFIG_SYS_NAND_BASE_PHYS
SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC),
diff --git a/board/freescale/b4860qds/tlb.c b/board/freescale/b4860qds/tlb.c
index 6d634bf..29cc41b 100644
--- a/board/freescale/b4860qds/tlb.c
+++ b/board/freescale/b4860qds/tlb.c
@@ -106,7 +106,7 @@
#ifdef CONFIG_SYS_DCSRBAR_PHYS
SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 10, BOOKE_PAGESZ_4M, 1),
+ 0, 10, BOOKE_PAGESZ_32M, 1),
#endif
#ifdef CONFIG_SYS_NAND_BASE
/*
diff --git a/board/freescale/common/qixis.h b/board/freescale/common/qixis.h
index 8d914d5..2cf8738 100644
--- a/board/freescale/common/qixis.h
+++ b/board/freescale/common/qixis.h
@@ -78,7 +78,11 @@
u8 trig_stat;
u8 res12[3];
u8 trig_ctr[4];
- u8 res13[48];
+ u8 res13[16];
+ u8 clk_freq[6]; /* Clock Measurement Registers */
+ u8 res_c6[8];
+ u8 clk_base[2]; /* Clock Frequency Base Reg */
+ u8 res_d0[16];
u8 aux2[4]; /* Auxiliary Registers,0xE0 */
u8 res14[10];
u8 aux_ad;
diff --git a/board/freescale/corenet_ds/eth_superhydra.c b/board/freescale/corenet_ds/eth_superhydra.c
index ef9de25..ae07073 100644
--- a/board/freescale/corenet_ds/eth_superhydra.c
+++ b/board/freescale/corenet_ds/eth_superhydra.c
@@ -605,8 +605,8 @@
lane = serdes_get_first_lane(XAUI_FM1);
if (lane >= 0) {
debug("FM1@TGEC1 expects XAUI in slot %u\n", lane_to_slot[lane]);
- mdio_mux[FM1_10GEC1].mask = BRDCFG1_EMI2_SEL_MASK;
- mdio_mux[FM1_10GEC1].val = BRDCFG1_EMI2_SEL_SLOT2;
+ mdio_mux[i].mask = BRDCFG1_EMI2_SEL_MASK;
+ mdio_mux[i].val = BRDCFG1_EMI2_SEL_SLOT2;
super_hydra_mdio_set_mux("SUPER_HYDRA_FM1_TGEC_MDIO",
mdio_mux[i].mask, mdio_mux[i].val);
}
@@ -704,8 +704,8 @@
lane = serdes_get_first_lane(XAUI_FM2);
if (lane >= 0) {
debug("FM2@TGEC1 expects XAUI in slot %u\n", lane_to_slot[lane]);
- mdio_mux[FM2_10GEC1].mask = BRDCFG1_EMI2_SEL_MASK;
- mdio_mux[FM2_10GEC1].val = BRDCFG1_EMI2_SEL_SLOT1;
+ mdio_mux[i].mask = BRDCFG1_EMI2_SEL_MASK;
+ mdio_mux[i].val = BRDCFG1_EMI2_SEL_SLOT1;
super_hydra_mdio_set_mux("SUPER_HYDRA_FM2_TGEC_MDIO",
mdio_mux[i].mask, mdio_mux[i].val);
}
diff --git a/board/freescale/corenet_ds/rcw_p5040ds.cfg b/board/freescale/corenet_ds/rcw_p5040ds.cfg
new file mode 100644
index 0000000..82fa741
--- /dev/null
+++ b/board/freescale/corenet_ds/rcw_p5040ds.cfg
@@ -0,0 +1,11 @@
+#
+# Default RCW for P5040DS.
+#
+
+#PBL preamble and RCW header
+aa55aa55 010e0100
+#64 bytes RCW data
+0c580000 00000000 22121200 00000000
+089c4400 00283000 58000000 61000000
+00000000 00000000 00000000 10070000
+00000000 00000000 00000000 00000000
diff --git a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
index d0f5815..bae5c23 100644
--- a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
+++ b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
@@ -172,3 +172,14 @@
/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
DATA 4 0x020e0018 0x007F007F
DATA 4 0x020e001c 0x007F007F
+
+/*
+ * Setup CCM_CCOSR register as follows:
+ *
+ * cko1_en = 1 --> CKO1 enabled
+ * cko1_div = 111 --> divide by 8
+ * cko1_sel = 1011 --> ahb_clk_root
+ *
+ * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz
+ */
+DATA 4 0x020c4060 0x000000fb
diff --git a/board/freescale/mx23evk/mx23evk.c b/board/freescale/mx23evk/mx23evk.c
index 41ba303..d25e2b3 100644
--- a/board/freescale/mx23evk/mx23evk.c
+++ b/board/freescale/mx23evk/mx23evk.c
@@ -43,6 +43,12 @@
/* SSP0 clock at 96MHz */
mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
+ /* Power on LCD */
+ gpio_direction_output(MX23_PAD_LCD_RESET__GPIO_1_18, 1);
+
+ /* Set contrast to maximum */
+ gpio_direction_output(MX23_PAD_PWM2__GPIO_1_28, 1);
+
return 0;
}
diff --git a/board/freescale/mx23evk/spl_boot.c b/board/freescale/mx23evk/spl_boot.c
index b6f4e7e..fd71f7d 100644
--- a/board/freescale/mx23evk/spl_boot.c
+++ b/board/freescale/mx23evk/spl_boot.c
@@ -25,8 +25,9 @@
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
-#define MUX_CONFIG_SSP1 (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
-#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_16MA | MXS_PAD_PULLUP)
+#define MUX_CONFIG_SSP1 (MXS_PAD_8MA | MXS_PAD_PULLUP)
+#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP)
+#define MUX_CONFIG_LCD (MXS_PAD_4MA | MXS_PAD_NOPULL)
const iomux_cfg_t iomux_setup[] = {
/* DUART */
@@ -96,6 +97,37 @@
/* Slot Power Enable */
MX23_PAD_PWM3__GPIO_1_29 |
(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ /* LCD */
+ MX23_PAD_LCD_D00__LCD_D00 | MUX_CONFIG_LCD,
+ MX23_PAD_LCD_D01__LCD_D01 | MUX_CONFIG_LCD,
+ MX23_PAD_LCD_D02__LCD_D02 | MUX_CONFIG_LCD,
+ MX23_PAD_LCD_D03__LCD_D03 | MUX_CONFIG_LCD,
+ MX23_PAD_LCD_D04__LCD_D04 | MUX_CONFIG_LCD,
+ MX23_PAD_LCD_D05__LCD_D05 | MUX_CONFIG_LCD,
+ MX23_PAD_LCD_D06__LCD_D06 | MUX_CONFIG_LCD,
+ MX23_PAD_LCD_D07__LCD_D07 | MUX_CONFIG_LCD,
+ MX23_PAD_LCD_D08__LCD_D08 | MUX_CONFIG_LCD,
+ MX23_PAD_LCD_D09__LCD_D09 | MUX_CONFIG_LCD,
+ MX23_PAD_LCD_D10__LCD_D10 | MUX_CONFIG_LCD,
+ MX23_PAD_LCD_D11__LCD_D11 | MUX_CONFIG_LCD,
+ MX23_PAD_LCD_D12__LCD_D12 | MUX_CONFIG_LCD,
+ MX23_PAD_LCD_D13__LCD_D13 | MUX_CONFIG_LCD,
+ MX23_PAD_LCD_D14__LCD_D14 | MUX_CONFIG_LCD,
+ MX23_PAD_LCD_D15__LCD_D15 | MUX_CONFIG_LCD,
+ MX23_PAD_LCD_D16__LCD_D16 | MUX_CONFIG_LCD,
+ MX23_PAD_LCD_D17__LCD_D17 | MUX_CONFIG_LCD,
+ MX23_PAD_GPMI_D08__LCD_D18 | MUX_CONFIG_LCD,
+ MX23_PAD_GPMI_D09__LCD_D19 | MUX_CONFIG_LCD,
+ MX23_PAD_GPMI_D10__LCD_D20 | MUX_CONFIG_LCD,
+ MX23_PAD_GPMI_D11__LCD_D21 | MUX_CONFIG_LCD,
+ MX23_PAD_GPMI_D12__LCD_D22 | MUX_CONFIG_LCD,
+ MX23_PAD_GPMI_D13__LCD_D23 | MUX_CONFIG_LCD,
+ MX23_PAD_LCD_DOTCK__LCD_DOTCK | MUX_CONFIG_LCD,
+ MX23_PAD_LCD_ENABLE__LCD_ENABLE | MUX_CONFIG_LCD,
+ MX23_PAD_LCD_HSYNC__LCD_HSYNC | MUX_CONFIG_LCD,
+ MX23_PAD_LCD_VSYNC__LCD_VSYNC | MUX_CONFIG_LCD,
+ MX23_PAD_LCD_RESET__GPIO_1_18 | MUX_CONFIG_LCD, /* LCD power */
+ MX23_PAD_PWM2__GPIO_1_28 | MUX_CONFIG_LCD, /* LCD contrast */
};
#define HW_DRAM_CTL14 (0x38 >> 2)
diff --git a/board/freescale/mx25pdk/mx25pdk.c b/board/freescale/mx25pdk/mx25pdk.c
index d73e27e..5e6047f 100644
--- a/board/freescale/mx25pdk/mx25pdk.c
+++ b/board/freescale/mx25pdk/mx25pdk.c
@@ -21,8 +21,7 @@
#include <asm/io.h>
#include <asm/gpio.h>
#include <asm/arch/imx-regs.h>
-#include <asm/arch/imx25-pinmux.h>
-#include <asm/arch/sys_proto.h>
+#include <asm/arch/iomux-mx25.h>
#include <asm/arch/clock.h>
#include <mmc.h>
#include <fsl_esdhc.h>
@@ -31,8 +30,8 @@
#include <fsl_pmic.h>
#include <mc34704.h>
-#define FEC_RESET_B IMX_GPIO_NR(2, 3)
-#define FEC_ENABLE_B IMX_GPIO_NR(4, 8)
+#define FEC_RESET_B IMX_GPIO_NR(4, 8)
+#define FEC_ENABLE_B IMX_GPIO_NR(2, 3)
#define CARD_DETECT IMX_GPIO_NR(2, 1)
DECLARE_GLOBAL_DATA_PTR;
@@ -43,29 +42,42 @@
};
#endif
+/*
+ * FIXME: need to revisit this
+ * The original code enabled PUE and 100-k pull-down without PKE, so the right
+ * value here is likely:
+ * 0 for no pull
+ * or:
+ * PAD_CTL_PUS_100K_DOWN for 100-k pull-down
+ */
+#define FEC_OUT_PAD_CTRL 0
+
+#define I2C_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_ODE)
+
static void mx25pdk_fec_init(void)
{
- struct iomuxc_mux_ctl *muxctl;
- struct iomuxc_pad_ctl *padctl;
- u32 gpio_mux_mode = MX25_PIN_MUX_MODE(5);
- u32 gpio_mux_mode0_sion = MX25_PIN_MUX_MODE(0) | MX25_PIN_MUX_SION;
+ static const iomux_v3_cfg_t fec_pads[] = {
+ MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
+ MX25_PAD_FEC_RX_DV__FEC_RX_DV,
+ MX25_PAD_FEC_RDATA0__FEC_RDATA0,
+ NEW_PAD_CTRL(MX25_PAD_FEC_TDATA0__FEC_TDATA0, FEC_OUT_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_FEC_TX_EN__FEC_TX_EN, FEC_OUT_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_FEC_MDC__FEC_MDC, FEC_OUT_PAD_CTRL),
+ MX25_PAD_FEC_MDIO__FEC_MDIO,
+ MX25_PAD_FEC_RDATA1__FEC_RDATA1,
+ NEW_PAD_CTRL(MX25_PAD_FEC_TDATA1__FEC_TDATA1, FEC_OUT_PAD_CTRL),
- /* FEC pin init is generic */
- mx25_fec_init_pins();
+ NEW_PAD_CTRL(MX25_PAD_D12__GPIO_4_8, 0), /* FEC_RESET_B */
+ NEW_PAD_CTRL(MX25_PAD_A17__GPIO_2_3, 0), /* FEC_ENABLE_B */
+ };
- muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE;
- padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE;
- /*
- * Set up FEC_RESET_B and FEC_ENABLE_B
- *
- * FEC_RESET_B: gpio2_3 is ALT 5 mode of pin D12
- * FEC_ENABLE_B: gpio4_8 is ALT 5 mode of pin A17
- */
- writel(gpio_mux_mode, &muxctl->pad_d12);
- writel(gpio_mux_mode, &muxctl->pad_a17);
+ static const iomux_v3_cfg_t i2c_pads[] = {
+ NEW_PAD_CTRL(MX25_PAD_I2C1_CLK__I2C1_CLK, I2C_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_I2C1_DAT__I2C1_DAT, I2C_PAD_CTRL),
+ };
- writel(0x0, &padctl->pad_d12);
- writel(0x0, &padctl->pad_a17);
+ imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
/* Assert RESET and ENABLE low */
gpio_direction_output(FEC_RESET_B, 0);
@@ -78,10 +90,7 @@
gpio_set_value(FEC_ENABLE_B, 1);
/* Setup I2C pins so that PMIC can turn on PHY supply */
- writel(gpio_mux_mode0_sion, &muxctl->pad_i2c1_clk);
- writel(gpio_mux_mode0_sion, &muxctl->pad_i2c1_dat);
- writel(0x1E8, &padctl->pad_i2c1_clk);
- writel(0x1E8, &padctl->pad_i2c1_dat);
+ imx_iomux_v3_setup_multiple_pads(i2c_pads, ARRAY_SIZE(i2c_pads));
}
int dram_init(void)
@@ -92,9 +101,35 @@
return 0;
}
+/*
+ * Set up input pins with hysteresis and 100-k pull-ups
+ */
+#define UART1_IN_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP)
+/*
+ * FIXME: need to revisit this
+ * The original code enabled PUE and 100-k pull-down without PKE, so the right
+ * value here is likely:
+ * 0 for no pull
+ * or:
+ * PAD_CTL_PUS_100K_DOWN for 100-k pull-down
+ */
+#define UART1_OUT_PAD_CTRL 0
+
+static void mx25pdk_uart1_init(void)
+{
+ static const iomux_v3_cfg_t uart1_pads[] = {
+ NEW_PAD_CTRL(MX25_PAD_UART1_RXD__UART1_RXD, UART1_IN_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_UART1_TXD__UART1_TXD, UART1_OUT_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_UART1_RTS__UART1_RTS, UART1_OUT_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_UART1_CTS__UART1_CTS, UART1_IN_PAD_CTRL),
+ };
+
+ imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+}
+
int board_early_init_f(void)
{
- mx25_uart1_init_pins();
+ mx25pdk_uart1_init();
return 0;
}
@@ -131,21 +166,8 @@
#ifdef CONFIG_FSL_ESDHC
int board_mmc_getcd(struct mmc *mmc)
{
- struct iomuxc_mux_ctl *muxctl;
- struct iomuxc_pad_ctl *padctl;
- u32 gpio_mux_mode = MX25_PIN_MUX_MODE(5);
-
- /*
- * Set up the Card Detect pin.
- *
- * SD1_GPIO_CD: gpio2_1 is ALT 5 mode of pin A15
- *
- */
- muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE;
- padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE;
-
- writel(gpio_mux_mode, &muxctl->pad_a15);
- writel(0x0, &padctl->pad_a15);
+ /* Set up the Card Detect pin. */
+ imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX25_PAD_A15__GPIO_2_1, 0));
gpio_direction_input(CARD_DETECT);
return !gpio_get_value(CARD_DETECT);
@@ -153,16 +175,16 @@
int board_mmc_init(bd_t *bis)
{
- struct iomuxc_mux_ctl *muxctl;
- u32 sdhc1_mux_mode = MX25_PIN_MUX_MODE(0) | MX25_PIN_MUX_SION;
+ static const iomux_v3_cfg_t sdhc1_pads[] = {
+ NEW_PAD_CTRL(MX25_PAD_SD1_CMD__SD1_CMD, NO_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_SD1_CLK__SD1_CLK, NO_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_SD1_DATA0__SD1_DATA0, NO_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_SD1_DATA1__SD1_DATA1, NO_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_SD1_DATA2__SD1_DATA2, NO_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_SD1_DATA3__SD1_DATA3, NO_PAD_CTRL),
+ };
- muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE;
- writel(sdhc1_mux_mode, &muxctl->pad_sd1_cmd);
- writel(sdhc1_mux_mode, &muxctl->pad_sd1_clk);
- writel(sdhc1_mux_mode, &muxctl->pad_sd1_data0);
- writel(sdhc1_mux_mode, &muxctl->pad_sd1_data1);
- writel(sdhc1_mux_mode, &muxctl->pad_sd1_data2);
- writel(sdhc1_mux_mode, &muxctl->pad_sd1_data3);
+ imx_iomux_v3_setup_multiple_pads(sdhc1_pads, ARRAY_SIZE(sdhc1_pads));
esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
diff --git a/board/freescale/mx28evk/iomux.c b/board/freescale/mx28evk/iomux.c
index ae6eda3..beae0e6 100644
--- a/board/freescale/mx28evk/iomux.c
+++ b/board/freescale/mx28evk/iomux.c
@@ -30,6 +30,7 @@
#define MUX_CONFIG_ENET (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL)
#define MUX_CONFIG_SSP2 (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP)
+#define MUX_CONFIG_LCD (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
const iomux_cfg_t iomux_setup[] = {
/* DUART */
@@ -162,6 +163,38 @@
/* I2C */
MX28_PAD_I2C0_SCL__I2C0_SCL,
MX28_PAD_I2C0_SDA__I2C0_SDA,
+
+ /* LCD */
+ MX28_PAD_LCD_D00__LCD_D0 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D01__LCD_D1 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D02__LCD_D2 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D03__LCD_D3 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D04__LCD_D4 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D05__LCD_D5 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D06__LCD_D6 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D07__LCD_D7 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D08__LCD_D8 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D09__LCD_D9 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D10__LCD_D10 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D11__LCD_D11 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D12__LCD_D12 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D13__LCD_D13 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D14__LCD_D14 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D15__LCD_D15 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D16__LCD_D16 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D17__LCD_D17 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D18__LCD_D18 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D19__LCD_D19 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D20__LCD_D20 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D21__LCD_D21 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D22__LCD_D22 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D23__LCD_D23 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_RD_E__LCD_VSYNC | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_WR_RWN__LCD_HSYNC | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_RS__LCD_DOTCLK | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_CS__LCD_ENABLE | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_RESET__GPIO_3_30 | MUX_CONFIG_LCD, /* LCD power */
+ MX28_PAD_PWM2__GPIO_3_18 | MUX_CONFIG_LCD, /* LCD contrast */
};
#define HW_DRAM_CTL29 (0x74 >> 2)
diff --git a/board/freescale/mx28evk/mx28evk.c b/board/freescale/mx28evk/mx28evk.c
index de7231b..4edd9f4 100644
--- a/board/freescale/mx28evk/mx28evk.c
+++ b/board/freescale/mx28evk/mx28evk.c
@@ -59,6 +59,12 @@
gpio_direction_output(MX28_PAD_AUART2_RX__GPIO_3_8, 1);
#endif
+ /* Power on LCD */
+ gpio_direction_output(MX28_PAD_LCD_RESET__GPIO_3_30, 1);
+
+ /* Set contrast to maximum */
+ gpio_direction_output(MX28_PAD_PWM2__GPIO_3_18, 1);
+
return 0;
}
diff --git a/board/freescale/mx31pdk/mx31pdk.c b/board/freescale/mx31pdk/mx31pdk.c
index 49158bd..4f6cfee 100644
--- a/board/freescale/mx31pdk/mx31pdk.c
+++ b/board/freescale/mx31pdk/mx31pdk.c
@@ -39,7 +39,21 @@
#ifdef CONFIG_SPL_BUILD
void board_init_f(ulong bootflag)
{
- relocate_code(CONFIG_SPL_TEXT_BASE);
+ /*
+ * copy ourselves from where we are running to where we were
+ * linked at. Use ulong pointers as all addresses involved
+ * are 4-byte-aligned.
+ */
+ ulong *start_ptr, *end_ptr, *link_ptr, *run_ptr, *dst;
+ asm volatile ("ldr %0, =_start" : "=r"(start_ptr));
+ asm volatile ("ldr %0, =_end" : "=r"(end_ptr));
+ asm volatile ("ldr %0, =board_init_f" : "=r"(link_ptr));
+ asm volatile ("adr %0, board_init_f" : "=r"(run_ptr));
+ for (dst = start_ptr; dst < end_ptr; dst++)
+ *dst = *(dst+(run_ptr-link_ptr));
+ /*
+ * branch to nand_boot's link-time address.
+ */
asm volatile("ldr pc, =nand_boot");
}
#endif
diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c
index b7f474e..9f667d2 100644
--- a/board/freescale/mx35pdk/mx35pdk.c
+++ b/board/freescale/mx35pdk/mx35pdk.c
@@ -28,8 +28,7 @@
#include <asm/arch/imx-regs.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/clock.h>
-#include <asm/arch/mx35_pins.h>
-#include <asm/arch/iomux.h>
+#include <asm/arch/iomux-mx35.h>
#include <i2c.h>
#include <power/pmic.h>
#include <fsl_pmic.h>
@@ -73,114 +72,88 @@
gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
}
+#define I2C_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_ODE)
+
static void setup_iomux_i2c(void)
{
- int pad;
+ static const iomux_v3_cfg_t i2c1_pads[] = {
+ NEW_PAD_CTRL(MX35_PAD_I2C1_CLK__I2C1_SCL, I2C_PAD_CTRL),
+ NEW_PAD_CTRL(MX35_PAD_I2C1_DAT__I2C1_SDA, I2C_PAD_CTRL),
+ };
/* setup pins for I2C1 */
- mxc_request_iomux(MX35_PIN_I2C1_CLK, MUX_CONFIG_SION);
- mxc_request_iomux(MX35_PIN_I2C1_DAT, MUX_CONFIG_SION);
-
- pad = (PAD_CTL_HYS_SCHMITZ | PAD_CTL_PKE_ENABLE \
- | PAD_CTL_PUE_PUD | PAD_CTL_ODE_OpenDrain);
-
- mxc_iomux_set_pad(MX35_PIN_I2C1_CLK, pad);
- mxc_iomux_set_pad(MX35_PIN_I2C1_DAT, pad);
+ imx_iomux_v3_setup_multiple_pads(i2c1_pads, ARRAY_SIZE(i2c1_pads));
}
static void setup_iomux_spi(void)
{
- mxc_request_iomux(MX35_PIN_CSPI1_MOSI, MUX_CONFIG_SION);
- mxc_request_iomux(MX35_PIN_CSPI1_MISO, MUX_CONFIG_SION);
- mxc_request_iomux(MX35_PIN_CSPI1_SS0, MUX_CONFIG_SION);
- mxc_request_iomux(MX35_PIN_CSPI1_SS1, MUX_CONFIG_SION);
- mxc_request_iomux(MX35_PIN_CSPI1_SCLK, MUX_CONFIG_SION);
+ static const iomux_v3_cfg_t spi_pads[] = {
+ MX35_PAD_CSPI1_MOSI__CSPI1_MOSI,
+ MX35_PAD_CSPI1_MISO__CSPI1_MISO,
+ MX35_PAD_CSPI1_SS0__CSPI1_SS0,
+ MX35_PAD_CSPI1_SS1__CSPI1_SS1,
+ MX35_PAD_CSPI1_SCLK__CSPI1_SCLK,
+ };
+
+ imx_iomux_v3_setup_multiple_pads(spi_pads, ARRAY_SIZE(spi_pads));
}
+#define USBOTG_IN_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | \
+ PAD_CTL_DSE_LOW | PAD_CTL_SRE_SLOW)
+#define USBOTG_OUT_PAD_CTRL (PAD_CTL_DSE_LOW | PAD_CTL_SRE_SLOW)
+
static void setup_iomux_usbotg(void)
{
- int in_pad, out_pad;
+ static const iomux_v3_cfg_t usbotg_pads[] = {
+ NEW_PAD_CTRL(MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
+ USBOTG_OUT_PAD_CTRL),
+ NEW_PAD_CTRL(MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
+ USBOTG_IN_PAD_CTRL),
+ };
/* Set up pins for USBOTG. */
- mxc_request_iomux(MX35_PIN_USBOTG_PWR,
- MUX_CONFIG_SION | MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_USBOTG_OC,
- MUX_CONFIG_SION | MUX_CONFIG_FUNC);
-
- in_pad = PAD_CTL_DRV_3_3V | PAD_CTL_HYS_SCHMITZ | PAD_CTL_PKE_ENABLE |
- PAD_CTL_PUE_PUD | PAD_CTL_100K_PD | PAD_CTL_ODE_CMOS |
- PAD_CTL_DRV_NORMAL | PAD_CTL_SRE_SLOW;
- out_pad = PAD_CTL_DRV_3_3V | PAD_CTL_HYS_CMOS | PAD_CTL_PKE_NONE |
- PAD_CTL_ODE_CMOS | PAD_CTL_DRV_NORMAL | PAD_CTL_SRE_SLOW;
-
- mxc_iomux_set_pad(MX35_PIN_USBOTG_PWR, out_pad);
- mxc_iomux_set_pad(MX35_PIN_USBOTG_OC, in_pad);
+ imx_iomux_v3_setup_multiple_pads(usbotg_pads, ARRAY_SIZE(usbotg_pads));
}
+#define FEC_PAD_CTRL (PAD_CTL_DSE_LOW | PAD_CTL_SRE_SLOW)
+
static void setup_iomux_fec(void)
{
- int pad;
+ static const iomux_v3_cfg_t fec_pads[] = {
+ NEW_PAD_CTRL(MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, FEC_PAD_CTRL |
+ PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
+ NEW_PAD_CTRL(MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, FEC_PAD_CTRL |
+ PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
+ NEW_PAD_CTRL(MX35_PAD_FEC_RX_DV__FEC_RX_DV, FEC_PAD_CTRL |
+ PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
+ NEW_PAD_CTRL(MX35_PAD_FEC_COL__FEC_COL, FEC_PAD_CTRL |
+ PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
+ NEW_PAD_CTRL(MX35_PAD_FEC_RDATA0__FEC_RDATA_0, FEC_PAD_CTRL |
+ PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
+ NEW_PAD_CTRL(MX35_PAD_FEC_TDATA0__FEC_TDATA_0, FEC_PAD_CTRL),
+ NEW_PAD_CTRL(MX35_PAD_FEC_TX_EN__FEC_TX_EN, FEC_PAD_CTRL),
+ NEW_PAD_CTRL(MX35_PAD_FEC_MDC__FEC_MDC, FEC_PAD_CTRL),
+ NEW_PAD_CTRL(MX35_PAD_FEC_MDIO__FEC_MDIO, FEC_PAD_CTRL |
+ PAD_CTL_HYS | PAD_CTL_PUS_22K_UP),
+ NEW_PAD_CTRL(MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, FEC_PAD_CTRL),
+ NEW_PAD_CTRL(MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, FEC_PAD_CTRL |
+ PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
+ NEW_PAD_CTRL(MX35_PAD_FEC_CRS__FEC_CRS, FEC_PAD_CTRL |
+ PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
+ NEW_PAD_CTRL(MX35_PAD_FEC_RDATA1__FEC_RDATA_1, FEC_PAD_CTRL |
+ PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
+ NEW_PAD_CTRL(MX35_PAD_FEC_TDATA1__FEC_TDATA_1, FEC_PAD_CTRL),
+ NEW_PAD_CTRL(MX35_PAD_FEC_RDATA2__FEC_RDATA_2, FEC_PAD_CTRL |
+ PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
+ NEW_PAD_CTRL(MX35_PAD_FEC_TDATA2__FEC_TDATA_2, FEC_PAD_CTRL),
+ NEW_PAD_CTRL(MX35_PAD_FEC_RDATA3__FEC_RDATA_3, FEC_PAD_CTRL |
+ PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
+ NEW_PAD_CTRL(MX35_PAD_FEC_TDATA3__FEC_TDATA_3, FEC_PAD_CTRL),
+ };
/* setup pins for FEC */
- mxc_request_iomux(MX35_PIN_FEC_TX_CLK, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_RX_CLK, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_RX_DV, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_COL, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_RDATA0, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_TDATA0, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_TX_EN, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_MDC, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_MDIO, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_TX_ERR, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_RX_ERR, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_CRS, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_RDATA1, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_TDATA1, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_RDATA2, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_TDATA2, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_RDATA3, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_TDATA3, MUX_CONFIG_FUNC);
-
- pad = (PAD_CTL_DRV_3_3V | PAD_CTL_PUE_PUD | PAD_CTL_ODE_CMOS | \
- PAD_CTL_DRV_NORMAL | PAD_CTL_SRE_SLOW);
-
- mxc_iomux_set_pad(MX35_PIN_FEC_TX_CLK, pad | PAD_CTL_HYS_SCHMITZ | \
- PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX35_PIN_FEC_RX_CLK, pad | PAD_CTL_HYS_SCHMITZ | \
- PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX35_PIN_FEC_RX_DV, pad | PAD_CTL_HYS_SCHMITZ | \
- PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX35_PIN_FEC_COL, pad | PAD_CTL_HYS_SCHMITZ | \
- PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX35_PIN_FEC_RDATA0, pad | PAD_CTL_HYS_SCHMITZ | \
- PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX35_PIN_FEC_TDATA0, pad | PAD_CTL_HYS_CMOS | \
- PAD_CTL_PKE_NONE | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX35_PIN_FEC_TX_EN, pad | PAD_CTL_HYS_CMOS | \
- PAD_CTL_PKE_NONE | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX35_PIN_FEC_MDC, pad | PAD_CTL_HYS_CMOS | \
- PAD_CTL_PKE_NONE | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX35_PIN_FEC_MDIO, pad | PAD_CTL_HYS_SCHMITZ | \
- PAD_CTL_PKE_ENABLE | PAD_CTL_22K_PU);
- mxc_iomux_set_pad(MX35_PIN_FEC_TX_ERR, pad | PAD_CTL_HYS_CMOS | \
- PAD_CTL_PKE_NONE | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX35_PIN_FEC_RX_ERR, pad | PAD_CTL_HYS_SCHMITZ | \
- PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX35_PIN_FEC_CRS, pad | PAD_CTL_HYS_SCHMITZ | \
- PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX35_PIN_FEC_RDATA1, pad | PAD_CTL_HYS_SCHMITZ | \
- PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX35_PIN_FEC_TDATA1, pad | PAD_CTL_HYS_CMOS | \
- PAD_CTL_PKE_NONE | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX35_PIN_FEC_RDATA2, pad | PAD_CTL_HYS_SCHMITZ | \
- PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX35_PIN_FEC_TDATA2, pad | PAD_CTL_HYS_CMOS | \
- PAD_CTL_PKE_NONE | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX35_PIN_FEC_RDATA3, pad | PAD_CTL_HYS_SCHMITZ | \
- PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX35_PIN_FEC_TDATA3, pad | PAD_CTL_HYS_CMOS | \
- PAD_CTL_PKE_NONE | PAD_CTL_100K_PD);
+ imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
}
int board_early_init_f(void)
@@ -262,8 +235,7 @@
if (pmic_detect()) {
p = pmic_get("FSL_PMIC");
- mxc_request_iomux(MX35_PIN_WATCHDOG_RST, MUX_CONFIG_SION |
- MUX_CONFIG_ALT1);
+ imx_iomux_v3_setup_pad(MX35_PAD_WDOG_RST__WDOG_WDOG_B);
pmic_reg_read(p, REG_SETTING_0, &pmic_val);
pmic_reg_write(p, REG_SETTING_0,
@@ -271,10 +243,9 @@
pmic_reg_read(p, REG_MODE_0, &pmic_val);
pmic_reg_write(p, REG_MODE_0, pmic_val | VGEN3EN);
- mxc_request_iomux(MX35_PIN_COMPARE, MUX_CONFIG_GPIO);
- mxc_iomux_set_input(MUX_IN_GPIO1_IN_5, INPUT_CTL_PATH0);
+ imx_iomux_v3_setup_pad(MX35_PAD_COMPARE__GPIO1_5);
- gpio_direction_output(IMX_GPIO_NR(2, 5), 1);
+ gpio_direction_output(IMX_GPIO_NR(1, 5), 1);
}
val = mc9sdz60_reg_read(MC9SDZ60_REG_GPIO_1) | 0x04;
@@ -312,13 +283,17 @@
int board_mmc_init(bd_t *bis)
{
+ static const iomux_v3_cfg_t sdhc1_pads[] = {
+ MX35_PAD_SD1_CMD__ESDHC1_CMD,
+ MX35_PAD_SD1_CLK__ESDHC1_CLK,
+ MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
+ MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
+ MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
+ MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
+ };
+
/* configure pins for SDHC1 only */
- mxc_request_iomux(MX35_PIN_SD1_CMD, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_SD1_CLK, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_SD1_DATA0, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_SD1_DATA1, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_SD1_DATA2, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_SD1_DATA3, MUX_CONFIG_FUNC);
+ imx_iomux_v3_setup_multiple_pads(sdhc1_pads, ARRAY_SIZE(sdhc1_pads));
esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
return fsl_esdhc_initialize(bis, &esdhc_cfg);
diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c
index 54c16b1..369da6d 100644
--- a/board/freescale/mx51evk/mx51evk.c
+++ b/board/freescale/mx51evk/mx51evk.c
@@ -24,8 +24,7 @@
#include <asm/io.h>
#include <asm/gpio.h>
#include <asm/arch/imx-regs.h>
-#include <asm/arch/mx5x_pins.h>
-#include <asm/arch/iomux.h>
+#include <asm/arch/iomux-mx51.h>
#include <asm/errno.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/crm_regs.h>
@@ -64,160 +63,103 @@
return rev;
}
+#define UART_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_DSE_HIGH)
+
static void setup_iomux_uart(void)
{
- unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
- PAD_CTL_PUE_PULL | PAD_CTL_DRV_HIGH;
+ static const iomux_v3_cfg_t uart_pads[] = {
+ MX51_PAD_UART1_RXD__UART1_RXD,
+ MX51_PAD_UART1_TXD__UART1_TXD,
+ NEW_PAD_CTRL(MX51_PAD_UART1_RTS__UART1_RTS, UART_PAD_CTRL),
+ NEW_PAD_CTRL(MX51_PAD_UART1_CTS__UART1_CTS, UART_PAD_CTRL),
+ };
- mxc_request_iomux(MX51_PIN_UART1_RXD, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_UART1_RXD, pad | PAD_CTL_SRE_FAST);
- mxc_request_iomux(MX51_PIN_UART1_TXD, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_UART1_TXD, pad | PAD_CTL_SRE_FAST);
- mxc_request_iomux(MX51_PIN_UART1_RTS, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_UART1_RTS, pad);
- mxc_request_iomux(MX51_PIN_UART1_CTS, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_UART1_CTS, pad);
+ imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
}
static void setup_iomux_fec(void)
{
- /*FEC_MDIO*/
- mxc_request_iomux(MX51_PIN_EIM_EB2 , IOMUX_CONFIG_ALT3);
- mxc_iomux_set_pad(MX51_PIN_EIM_EB2 , 0x1FD);
+ static const iomux_v3_cfg_t fec_pads[] = {
+ NEW_PAD_CTRL(MX51_PAD_EIM_EB2__FEC_MDIO, PAD_CTL_HYS |
+ PAD_CTL_PUS_22K_UP | PAD_CTL_ODE |
+ PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST),
+ MX51_PAD_NANDF_CS3__FEC_MDC,
+ NEW_PAD_CTRL(MX51_PAD_EIM_CS3__FEC_RDATA3, MX51_PAD_CTRL_2),
+ NEW_PAD_CTRL(MX51_PAD_EIM_CS2__FEC_RDATA2, MX51_PAD_CTRL_2),
+ NEW_PAD_CTRL(MX51_PAD_EIM_EB3__FEC_RDATA1, MX51_PAD_CTRL_2),
+ MX51_PAD_NANDF_D9__FEC_RDATA0,
+ MX51_PAD_NANDF_CS6__FEC_TDATA3,
+ MX51_PAD_NANDF_CS5__FEC_TDATA2,
+ MX51_PAD_NANDF_CS4__FEC_TDATA1,
+ MX51_PAD_NANDF_D8__FEC_TDATA0,
+ MX51_PAD_NANDF_CS7__FEC_TX_EN,
+ MX51_PAD_NANDF_CS2__FEC_TX_ER,
+ MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK,
+ NEW_PAD_CTRL(MX51_PAD_NANDF_RB2__FEC_COL, MX51_PAD_CTRL_4),
+ NEW_PAD_CTRL(MX51_PAD_NANDF_RB3__FEC_RX_CLK, MX51_PAD_CTRL_4),
+ MX51_PAD_EIM_CS5__FEC_CRS,
+ MX51_PAD_EIM_CS4__FEC_RX_ER,
+ NEW_PAD_CTRL(MX51_PAD_NANDF_D11__FEC_RX_DV, MX51_PAD_CTRL_4),
+ };
- /*FEC_MDC*/
- mxc_request_iomux(MX51_PIN_NANDF_CS3, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX51_PIN_NANDF_CS3, 0x2004);
-
- /* FEC RDATA[3] */
- mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3);
- mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180);
-
- /* FEC RDATA[2] */
- mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3);
- mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180);
-
- /* FEC RDATA[1] */
- mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3);
- mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180);
-
- /* FEC RDATA[0] */
- mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180);
-
- /* FEC TDATA[3] */
- mxc_request_iomux(MX51_PIN_NANDF_CS6, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX51_PIN_NANDF_CS6, 0x2004);
-
- /* FEC TDATA[2] */
- mxc_request_iomux(MX51_PIN_NANDF_CS5, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX51_PIN_NANDF_CS5, 0x2004);
-
- /* FEC TDATA[1] */
- mxc_request_iomux(MX51_PIN_NANDF_CS4, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX51_PIN_NANDF_CS4, 0x2004);
-
- /* FEC TDATA[0] */
- mxc_request_iomux(MX51_PIN_NANDF_D8, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX51_PIN_NANDF_D8, 0x2004);
-
- /* FEC TX_EN */
- mxc_request_iomux(MX51_PIN_NANDF_CS7, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_CS7, 0x2004);
-
- /* FEC TX_ER */
- mxc_request_iomux(MX51_PIN_NANDF_CS2, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX51_PIN_NANDF_CS2, 0x2004);
-
- /* FEC TX_CLK */
- mxc_request_iomux(MX51_PIN_NANDF_RDY_INT, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_RDY_INT, 0x2180);
-
- /* FEC TX_COL */
- mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180);
-
- /* FEC RX_CLK */
- mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180);
-
- /* FEC RX_CRS */
- mxc_request_iomux(MX51_PIN_EIM_CS5, IOMUX_CONFIG_ALT3);
- mxc_iomux_set_pad(MX51_PIN_EIM_CS5, 0x180);
-
- /* FEC RX_ER */
- mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3);
- mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180);
-
- /* FEC RX_DV */
- mxc_request_iomux(MX51_PIN_NANDF_D11, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX51_PIN_NANDF_D11, 0x2180);
+ imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
}
#ifdef CONFIG_MXC_SPI
static void setup_iomux_spi(void)
{
- /* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */
- mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI, 0x105);
+ static const iomux_v3_cfg_t spi_pads[] = {
+ NEW_PAD_CTRL(MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI, PAD_CTL_HYS |
+ PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_CSPI1_MISO__ECSPI1_MISO, PAD_CTL_HYS |
+ PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_CSPI1_SS1__ECSPI1_SS1,
+ MX51_GPIO_PAD_CTRL),
+ MX51_PAD_CSPI1_SS0__ECSPI1_SS0,
+ NEW_PAD_CTRL(MX51_PAD_CSPI1_RDY__ECSPI1_RDY, MX51_PAD_CTRL_2),
+ NEW_PAD_CTRL(MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, PAD_CTL_HYS |
+ PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST),
+ };
- /* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */
- mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO, 0x105);
-
- /* de-select SS1 of instance: ecspi1. */
- mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT3);
- mxc_iomux_set_pad(MX51_PIN_CSPI1_SS1, 0x85);
-
- /* 000: Select mux mode: ALT0 mux port: SS0 ecspi1 */
- mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_CSPI1_SS0, 0x185);
-
- /* 000: Select mux mode: ALT0 mux port: RDY of instance: ecspi1. */
- mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, 0x180);
-
- /* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */
- mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK, 0x105);
+ imx_iomux_v3_setup_multiple_pads(spi_pads, ARRAY_SIZE(spi_pads));
}
#endif
#ifdef CONFIG_USB_EHCI_MX5
-#define MX51EVK_USBH1_HUB_RST IOMUX_TO_GPIO(MX51_PIN_GPIO1_7) /* GPIO1_7 */
-#define MX51EVK_USBH1_STP IOMUX_TO_GPIO(MX51_PIN_USBH1_STP) /* GPIO1_27 */
-#define MX51EVK_USB_CLK_EN_B IOMUX_TO_GPIO(MX51_PIN_EIM_D18) /* GPIO2_1 */
-#define MX51EVK_USB_PHY_RESET IOMUX_TO_GPIO(MX51_PIN_EIM_D21) /* GPIO2_5 */
-
-#define USBH1_PAD (PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | \
- PAD_CTL_100K_PU | PAD_CTL_PUE_PULL | \
- PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE)
-#define GPIO_PAD (PAD_CTL_DRV_HIGH | PAD_CTL_PKE_ENABLE | \
- PAD_CTL_SRE_FAST)
-#define NO_PAD (1 << 16)
+#define MX51EVK_USBH1_HUB_RST IMX_GPIO_NR(1, 7)
+#define MX51EVK_USBH1_STP IMX_GPIO_NR(1, 27)
+#define MX51EVK_USB_CLK_EN_B IMX_GPIO_NR(2, 2)
+#define MX51EVK_USB_PHY_RESET IMX_GPIO_NR(2, 5)
static void setup_usb_h1(void)
{
- setup_iomux_usb_h1();
+ static const iomux_v3_cfg_t usb_h1_pads[] = {
+ MX51_PAD_USBH1_CLK__USBH1_CLK,
+ MX51_PAD_USBH1_DIR__USBH1_DIR,
+ MX51_PAD_USBH1_STP__USBH1_STP,
+ MX51_PAD_USBH1_NXT__USBH1_NXT,
+ MX51_PAD_USBH1_DATA0__USBH1_DATA0,
+ MX51_PAD_USBH1_DATA1__USBH1_DATA1,
+ MX51_PAD_USBH1_DATA2__USBH1_DATA2,
+ MX51_PAD_USBH1_DATA3__USBH1_DATA3,
+ MX51_PAD_USBH1_DATA4__USBH1_DATA4,
+ MX51_PAD_USBH1_DATA5__USBH1_DATA5,
+ MX51_PAD_USBH1_DATA6__USBH1_DATA6,
+ MX51_PAD_USBH1_DATA7__USBH1_DATA7,
- /* GPIO_1_7 for USBH1 hub reset */
- mxc_request_iomux(MX51_PIN_GPIO1_7, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_GPIO1_7, NO_PAD);
+ NEW_PAD_CTRL(MX51_PAD_GPIO1_7__GPIO1_7, 0), /* H1 hub reset */
+ MX51_PAD_EIM_D17__GPIO2_1,
+ MX51_PAD_EIM_D21__GPIO2_5, /* PHY reset */
+ };
- /* GPIO_2_1 */
- mxc_request_iomux(MX51_PIN_EIM_D17, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_EIM_D17, GPIO_PAD);
-
- /* GPIO_2_5 for USB PHY reset */
- mxc_request_iomux(MX51_PIN_EIM_D21, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_EIM_D21, GPIO_PAD);
+ imx_iomux_v3_setup_multiple_pads(usb_h1_pads, ARRAY_SIZE(usb_h1_pads));
}
int board_ehci_hcd_init(int port)
{
/* Set USBH1_STP to GPIO and toggle it */
- mxc_request_iomux(MX51_PIN_USBH1_STP, IOMUX_CONFIG_GPIO);
- mxc_iomux_set_pad(MX51_PIN_USBH1_STP, USBH1_PAD);
+ imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_USBH1_STP__GPIO1_27,
+ MX51_USBH_PAD_CTRL));
gpio_direction_output(MX51EVK_USBH1_STP, 0);
gpio_direction_output(MX51EVK_USB_PHY_RESET, 0);
@@ -225,8 +167,7 @@
gpio_set_value(MX51EVK_USBH1_STP, 1);
/* Set back USBH1_STP to be function */
- mxc_request_iomux(MX51_PIN_USBH1_STP, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_USBH1_STP, USBH1_PAD);
+ imx_iomux_v3_setup_pad(MX51_PAD_USBH1_STP__USBH1_STP);
/* De-assert USB PHY RESETB */
gpio_set_value(MX51EVK_USB_PHY_RESET, 1);
@@ -328,7 +269,8 @@
VVIDEOEN | VAUDIOEN | VSDEN;
pmic_reg_write(p, REG_MODE_1, val);
- mxc_request_iomux(MX51_PIN_EIM_A20, IOMUX_CONFIG_ALT1);
+ imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_EIM_A20__GPIO2_14,
+ NO_PAD_CTRL));
gpio_direction_output(IMX_GPIO_NR(2, 14), 0);
udelay(500);
@@ -342,9 +284,11 @@
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
int ret;
- mxc_request_iomux(MX51_PIN_GPIO1_0, IOMUX_CONFIG_ALT1);
+ imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_GPIO1_0__GPIO1_0,
+ NO_PAD_CTRL));
gpio_direction_input(IMX_GPIO_NR(1, 0));
- mxc_request_iomux(MX51_PIN_GPIO1_6, IOMUX_CONFIG_ALT0);
+ imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_GPIO1_6__GPIO1_6,
+ NO_PAD_CTRL));
gpio_direction_input(IMX_GPIO_NR(1, 6));
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
@@ -357,6 +301,40 @@
int board_mmc_init(bd_t *bis)
{
+ static const iomux_v3_cfg_t sd1_pads[] = {
+ NEW_PAD_CTRL(MX51_PAD_SD1_CMD__SD1_CMD, PAD_CTL_DSE_MAX |
+ PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_SD1_CLK__SD1_CLK, PAD_CTL_DSE_MAX |
+ PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_SD1_DATA0__SD1_DATA0, PAD_CTL_DSE_MAX |
+ PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_SD1_DATA1__SD1_DATA1, PAD_CTL_DSE_MAX |
+ PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_SD1_DATA2__SD1_DATA2, PAD_CTL_DSE_MAX |
+ PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_SD1_DATA3__SD1_DATA3, PAD_CTL_DSE_MAX |
+ PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_HYS),
+ NEW_PAD_CTRL(MX51_PAD_GPIO1_1__SD1_WP, PAD_CTL_HYS),
+ };
+
+ static const iomux_v3_cfg_t sd2_pads[] = {
+ NEW_PAD_CTRL(MX51_PAD_SD2_CMD__SD2_CMD,
+ PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_SD2_CLK__SD2_CLK,
+ PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_SD2_DATA0__SD2_DATA0,
+ PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_SD2_DATA1__SD2_DATA1,
+ PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_SD2_DATA2__SD2_DATA2,
+ PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_SD2_DATA3__SD2_DATA3,
+ PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_GPIO1_6__GPIO1_6, PAD_CTL_HYS),
+ NEW_PAD_CTRL(MX51_PAD_GPIO1_5__GPIO1_5, PAD_CTL_HYS),
+ };
+
u32 index;
s32 status = 0;
@@ -367,98 +345,12 @@
index++) {
switch (index) {
case 0:
- mxc_request_iomux(MX51_PIN_SD1_CMD,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_request_iomux(MX51_PIN_SD1_CLK,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_request_iomux(MX51_PIN_SD1_DATA0,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_request_iomux(MX51_PIN_SD1_DATA1,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_request_iomux(MX51_PIN_SD1_DATA2,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_request_iomux(MX51_PIN_SD1_DATA3,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_iomux_set_pad(MX51_PIN_SD1_CMD,
- PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
- PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_SD1_CLK,
- PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
- PAD_CTL_HYS_NONE | PAD_CTL_47K_PU |
- PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_SD1_DATA0,
- PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
- PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_SD1_DATA1,
- PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
- PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_SD1_DATA2,
- PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
- PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_SD1_DATA3,
- PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
- PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PD |
- PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
- mxc_request_iomux(MX51_PIN_GPIO1_0,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_iomux_set_pad(MX51_PIN_GPIO1_0,
- PAD_CTL_HYS_ENABLE);
- mxc_request_iomux(MX51_PIN_GPIO1_1,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_iomux_set_pad(MX51_PIN_GPIO1_1,
- PAD_CTL_HYS_ENABLE);
+ imx_iomux_v3_setup_multiple_pads(sd1_pads,
+ ARRAY_SIZE(sd1_pads));
break;
case 1:
- mxc_request_iomux(MX51_PIN_SD2_CMD,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_request_iomux(MX51_PIN_SD2_CLK,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_request_iomux(MX51_PIN_SD2_DATA0,
- IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX51_PIN_SD2_DATA1,
- IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX51_PIN_SD2_DATA2,
- IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX51_PIN_SD2_DATA3,
- IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_SD2_CMD,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
- PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_SD2_CLK,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
- PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_SD2_DATA0,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
- PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_SD2_DATA1,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
- PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_SD2_DATA2,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
- PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_SD2_DATA3,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
- PAD_CTL_SRE_FAST);
- mxc_request_iomux(MX51_PIN_SD2_CMD,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_request_iomux(MX51_PIN_GPIO1_6,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_iomux_set_pad(MX51_PIN_GPIO1_6,
- PAD_CTL_HYS_ENABLE);
- mxc_request_iomux(MX51_PIN_GPIO1_5,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_iomux_set_pad(MX51_PIN_GPIO1_5,
- PAD_CTL_HYS_ENABLE);
+ imx_iomux_v3_setup_multiple_pads(sd2_pads,
+ ARRAY_SIZE(sd2_pads));
break;
default:
printf("Warning: you configured more ESDHC controller"
diff --git a/board/freescale/mx51evk/mx51evk_video.c b/board/freescale/mx51evk/mx51evk_video.c
index 7be5c9b..556cb38 100644
--- a/board/freescale/mx51evk/mx51evk_video.c
+++ b/board/freescale/mx51evk/mx51evk_video.c
@@ -24,7 +24,7 @@
#include <common.h>
#include <linux/list.h>
#include <asm/gpio.h>
-#include <asm/arch/iomux.h>
+#include <asm/arch/iomux-mx51.h>
#include <linux/fb.h>
#include <ipu_pixfmt.h>
@@ -67,25 +67,25 @@
void setup_iomux_lcd(void)
{
/* DI2_PIN15 */
- mxc_request_iomux(MX51_PIN_DI_GP4, IOMUX_CONFIG_ALT4);
+ imx_iomux_v3_setup_pad(MX51_PAD_DI_GP4__DI2_PIN15);
- /* Pad settings for MX51_PIN_DI2_DISP_CLK */
- mxc_iomux_set_pad(MX51_PIN_DI2_DISP_CLK, PAD_CTL_HYS_NONE |
- PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
- PAD_CTL_DRV_MAX | PAD_CTL_SRE_SLOW);
+ /* Pad settings for DI2_DISP_CLK */
+ imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK,
+ PAD_CTL_PKE | PAD_CTL_DSE_MAX | PAD_CTL_SRE_SLOW));
/* Turn on 3.3V voltage for LCD */
- mxc_request_iomux(MX51_PIN_CSI2_D12, IOMUX_CONFIG_ALT3);
+ imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_CSI2_D12__GPIO4_9,
+ NO_PAD_CTRL));
gpio_direction_output(MX51EVK_LCD_3V3, 1);
/* Turn on 5V voltage for LCD */
- mxc_request_iomux(MX51_PIN_CSI2_D13, IOMUX_CONFIG_ALT3);
+ imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_CSI2_D13__GPIO4_10,
+ NO_PAD_CTRL));
gpio_direction_output(MX51EVK_LCD_5V, 1);
/* Turn on GPIO backlight */
- mxc_request_iomux(MX51_PIN_DI1_D1_CS, IOMUX_CONFIG_ALT4);
- mxc_iomux_set_input(MX51_GPIO3_IPP_IND_G_IN_4_SELECT_INPUT,
- INPUT_CTL_PATH1);
+ imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_DI1_D1_CS__GPIO3_4,
+ NO_PAD_CTRL));
gpio_direction_output(MX51EVK_LCD_BACKLIGHT, 1);
}
diff --git a/board/freescale/mx53ard/mx53ard.c b/board/freescale/mx53ard/mx53ard.c
index 8d433a3..e2dbf63 100644
--- a/board/freescale/mx53ard/mx53ard.c
+++ b/board/freescale/mx53ard/mx53ard.c
@@ -23,11 +23,10 @@
#include <common.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
-#include <asm/arch/mx5x_pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/clock.h>
-#include <asm/arch/iomux.h>
+#include <asm/arch/iomux-mx53.h>
#include <asm/errno.h>
#include <netdev.h>
#include <mmc.h>
@@ -61,9 +60,42 @@
#ifdef CONFIG_NAND_MXC
static void setup_iomux_nand(void)
{
+ static const iomux_v3_cfg_t nand_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0,
+ PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1,
+ PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0,
+ PAD_CTL_PUS_100K_UP),
+ NEW_PAD_CTRL(MX53_PAD_NANDF_CLE__EMI_NANDF_CLE,
+ PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_NANDF_ALE__EMI_NANDF_ALE,
+ PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B,
+ PAD_CTL_PUS_100K_UP),
+ NEW_PAD_CTRL(MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B,
+ PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B,
+ PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
+ };
+
u32 i, reg;
- #define M4IF_GENP_WEIM_MM_MASK 0x00000001
- #define WEIM_GCR2_MUX16_BYP_GRANT_MASK 0x00001000
reg = __raw_readl(M4IF_BASE_ADDR + 0xc);
reg &= ~M4IF_GENP_WEIM_MM_MASK;
@@ -74,48 +106,7 @@
__raw_writel(reg, WEIM_BASE_ADDR + i);
}
- mxc_request_iomux(MX53_PIN_NANDF_CS0, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_NANDF_CS0, PAD_CTL_DRV_HIGH);
- mxc_request_iomux(MX53_PIN_NANDF_CS1, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_NANDF_CS1, PAD_CTL_DRV_HIGH);
- mxc_request_iomux(MX53_PIN_NANDF_RB0, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_NANDF_RB0, PAD_CTL_PKE_ENABLE |
- PAD_CTL_PUE_PULL | PAD_CTL_100K_PU);
- mxc_request_iomux(MX53_PIN_NANDF_CLE, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_NANDF_CLE, PAD_CTL_DRV_HIGH);
- mxc_request_iomux(MX53_PIN_NANDF_ALE, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_NANDF_ALE, PAD_CTL_DRV_HIGH);
- mxc_request_iomux(MX53_PIN_NANDF_WP_B, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_NANDF_WP_B, PAD_CTL_PKE_ENABLE |
- PAD_CTL_PUE_PULL | PAD_CTL_100K_PU);
- mxc_request_iomux(MX53_PIN_NANDF_RE_B, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_NANDF_RE_B, PAD_CTL_DRV_HIGH);
- mxc_request_iomux(MX53_PIN_NANDF_WE_B, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_NANDF_WE_B, PAD_CTL_DRV_HIGH);
- mxc_request_iomux(MX53_PIN_EIM_DA0, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_EIM_DA0, PAD_CTL_PKE_ENABLE |
- PAD_CTL_100K_PU | PAD_CTL_DRV_HIGH);
- mxc_request_iomux(MX53_PIN_EIM_DA1, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_EIM_DA1, PAD_CTL_PKE_ENABLE |
- PAD_CTL_100K_PU | PAD_CTL_DRV_HIGH);
- mxc_request_iomux(MX53_PIN_EIM_DA2, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_EIM_DA2, PAD_CTL_PKE_ENABLE |
- PAD_CTL_100K_PU | PAD_CTL_DRV_HIGH);
- mxc_request_iomux(MX53_PIN_EIM_DA3, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_EIM_DA3, PAD_CTL_PKE_ENABLE |
- PAD_CTL_100K_PU | PAD_CTL_DRV_HIGH);
- mxc_request_iomux(MX53_PIN_EIM_DA4, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_EIM_DA4, PAD_CTL_PKE_ENABLE |
- PAD_CTL_100K_PU | PAD_CTL_DRV_HIGH);
- mxc_request_iomux(MX53_PIN_EIM_DA5, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_EIM_DA5, PAD_CTL_PKE_ENABLE |
- PAD_CTL_100K_PU | PAD_CTL_DRV_HIGH);
- mxc_request_iomux(MX53_PIN_EIM_DA6, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_EIM_DA6, PAD_CTL_PKE_ENABLE |
- PAD_CTL_100K_PU | PAD_CTL_DRV_HIGH);
- mxc_request_iomux(MX53_PIN_EIM_DA7, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_EIM_DA7, PAD_CTL_PKE_ENABLE |
- PAD_CTL_100K_PU | PAD_CTL_DRV_HIGH);
+ imx_iomux_v3_setup_multiple_pads(nand_pads, ARRAY_SIZE(nand_pads));
}
#else
static void setup_iomux_nand(void)
@@ -123,24 +114,17 @@
}
#endif
+#define UART_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
+
static void setup_iomux_uart(void)
{
- /* UART1 RXD */
- mxc_request_iomux(MX53_PIN_ATA_DMACK, IOMUX_CONFIG_ALT3);
- mxc_iomux_set_pad(MX53_PIN_ATA_DMACK,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU |
- PAD_CTL_ODE_OPENDRAIN_ENABLE);
- mxc_iomux_set_input(MX53_UART1_IPP_UART_RXD_MUX_SELECT_INPUT, 0x3);
+ static const iomux_v3_cfg_t uart_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_PATA_DMACK__UART1_RXD_MUX, UART_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DIOW__UART1_TXD_MUX, UART_PAD_CTRL),
+ };
- /* UART1 TXD */
- mxc_request_iomux(MX53_PIN_ATA_DIOW, IOMUX_CONFIG_ALT3);
- mxc_iomux_set_pad(MX53_PIN_ATA_DIOW,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU |
- PAD_CTL_ODE_OPENDRAIN_ENABLE);
+ imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
}
#ifdef CONFIG_FSL_ESDHC
@@ -154,9 +138,9 @@
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
int ret;
- mxc_request_iomux(MX53_PIN_GPIO_1, IOMUX_CONFIG_ALT1);
+ imx_iomux_v3_setup_pad(MX53_PAD_GPIO_1__GPIO1_1);
gpio_direction_input(IMX_GPIO_NR(1, 1));
- mxc_request_iomux(MX53_PIN_GPIO_4, IOMUX_CONFIG_ALT1);
+ imx_iomux_v3_setup_pad(MX53_PAD_GPIO_4__GPIO1_4);
gpio_direction_input(IMX_GPIO_NR(1, 4));
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
@@ -167,8 +151,36 @@
return ret;
}
+#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_PUS_100K_UP)
+#define SD_CLK_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH)
+#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \
+ PAD_CTL_DSE_HIGH)
+
int board_mmc_init(bd_t *bis)
{
+ static const iomux_v3_cfg_t sd1_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_CLK_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL),
+ };
+
+ static const iomux_v3_cfg_t sd2_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_SD2_CMD__ESDHC2_CMD, SD_CMD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD2_CLK__ESDHC2_CLK, SD_CLK_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD2_DATA0__ESDHC2_DAT0, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD2_DATA1__ESDHC2_DAT1, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD2_DATA2__ESDHC2_DAT2, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD2_DATA3__ESDHC2_DAT3, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA12__ESDHC2_DAT4, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA13__ESDHC2_DAT5, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA14__ESDHC2_DAT6, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA15__ESDHC2_DAT7, SD_PAD_CTRL),
+ };
+
u32 index;
s32 status = 0;
@@ -178,56 +190,12 @@
for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
switch (index) {
case 0:
- mxc_request_iomux(MX53_PIN_SD1_CMD, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_SD1_CLK, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_SD1_DATA0,
- IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_SD1_DATA1,
- IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_SD1_DATA2,
- IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_SD1_DATA3,
- IOMUX_CONFIG_ALT0);
-
- mxc_iomux_set_pad(MX53_PIN_SD1_CMD, 0x1E4);
- mxc_iomux_set_pad(MX53_PIN_SD1_CLK, 0xD4);
- mxc_iomux_set_pad(MX53_PIN_SD1_DATA0, 0x1D4);
- mxc_iomux_set_pad(MX53_PIN_SD1_DATA1, 0x1D4);
- mxc_iomux_set_pad(MX53_PIN_SD1_DATA2, 0x1D4);
- mxc_iomux_set_pad(MX53_PIN_SD1_DATA3, 0x1D4);
+ imx_iomux_v3_setup_multiple_pads(sd1_pads,
+ ARRAY_SIZE(sd1_pads));
break;
case 1:
- mxc_request_iomux(MX53_PIN_SD2_CMD,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_request_iomux(MX53_PIN_SD2_CLK,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_request_iomux(MX53_PIN_SD2_DATA0,
- IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_SD2_DATA1,
- IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_SD2_DATA2,
- IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_SD2_DATA3,
- IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_ATA_DATA12,
- IOMUX_CONFIG_ALT2);
- mxc_request_iomux(MX53_PIN_ATA_DATA13,
- IOMUX_CONFIG_ALT2);
- mxc_request_iomux(MX53_PIN_ATA_DATA14,
- IOMUX_CONFIG_ALT2);
- mxc_request_iomux(MX53_PIN_ATA_DATA15,
- IOMUX_CONFIG_ALT2);
-
- mxc_iomux_set_pad(MX53_PIN_SD2_CMD, 0x1E4);
- mxc_iomux_set_pad(MX53_PIN_SD2_CLK, 0xD4);
- mxc_iomux_set_pad(MX53_PIN_SD2_DATA0, 0x1D4);
- mxc_iomux_set_pad(MX53_PIN_SD2_DATA1, 0x1D4);
- mxc_iomux_set_pad(MX53_PIN_SD2_DATA2, 0x1D4);
- mxc_iomux_set_pad(MX53_PIN_SD2_DATA3, 0x1D4);
- mxc_iomux_set_pad(MX53_PIN_ATA_DATA12, 0x1D4);
- mxc_iomux_set_pad(MX53_PIN_ATA_DATA13, 0x1D4);
- mxc_iomux_set_pad(MX53_PIN_ATA_DATA14, 0x1D4);
- mxc_iomux_set_pad(MX53_PIN_ATA_DATA15, 0x1D4);
+ imx_iomux_v3_setup_multiple_pads(sd2_pads,
+ ARRAY_SIZE(sd2_pads));
break;
default:
printf("Warning: you configured more ESDHC controller"
@@ -244,85 +212,70 @@
static void weim_smc911x_iomux(void)
{
+ static const iomux_v3_cfg_t weim_smc911x_pads[] = {
+ /* Data bus */
+ NEW_PAD_CTRL(MX53_PAD_EIM_D16__EMI_WEIM_D_16,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_EIM_D17__EMI_WEIM_D_17,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_EIM_D18__EMI_WEIM_D_18,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_EIM_D19__EMI_WEIM_D_19,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_EIM_D20__EMI_WEIM_D_20,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_EIM_D21__EMI_WEIM_D_21,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_EIM_D22__EMI_WEIM_D_22,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_EIM_D23__EMI_WEIM_D_23,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_EIM_D24__EMI_WEIM_D_24,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_EIM_D25__EMI_WEIM_D_25,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_EIM_D26__EMI_WEIM_D_26,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_EIM_D27__EMI_WEIM_D_27,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_EIM_D28__EMI_WEIM_D_28,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_EIM_D29__EMI_WEIM_D_29,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_EIM_D30__EMI_WEIM_D_30,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_EIM_D31__EMI_WEIM_D_31,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
+
+ /* Address lines */
+ NEW_PAD_CTRL(MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
+
+ /* other EIM signals for ethernet */
+ MX53_PAD_EIM_OE__EMI_WEIM_OE,
+ MX53_PAD_EIM_RW__EMI_WEIM_RW,
+ MX53_PAD_EIM_CS1__EMI_WEIM_CS_1,
+ };
+
/* ETHERNET_INT as GPIO2_31 */
- mxc_request_iomux(MX53_PIN_EIM_EB3, IOMUX_CONFIG_ALT1);
+ imx_iomux_v3_setup_pad(MX53_PAD_EIM_EB3__GPIO2_31);
gpio_direction_input(ETHERNET_INT);
- /* Data bus */
- mxc_request_iomux(MX53_PIN_EIM_D16, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_EIM_D16, 0xA4);
-
- mxc_request_iomux(MX53_PIN_EIM_D17, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_EIM_D17, 0xA4);
-
- mxc_request_iomux(MX53_PIN_EIM_D18, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_EIM_D18, 0xA4);
-
- mxc_request_iomux(MX53_PIN_EIM_D19, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_EIM_D19, 0xA4);
-
- mxc_request_iomux(MX53_PIN_EIM_D20, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_EIM_D20, 0xA4);
-
- mxc_request_iomux(MX53_PIN_EIM_D21, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_EIM_D21, 0xA4);
-
- mxc_request_iomux(MX53_PIN_EIM_D22, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_EIM_D22, 0xA4);
-
- mxc_request_iomux(MX53_PIN_EIM_D23, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_EIM_D23, 0xA4);
-
- mxc_request_iomux(MX53_PIN_EIM_D24, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_EIM_D24, 0xA4);
-
- mxc_request_iomux(MX53_PIN_EIM_D25, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_EIM_D25, 0xA4);
-
- mxc_request_iomux(MX53_PIN_EIM_D26, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_EIM_D26, 0xA4);
-
- mxc_request_iomux(MX53_PIN_EIM_D27, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_EIM_D27, 0xA4);
-
- mxc_request_iomux(MX53_PIN_EIM_D28, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_EIM_D28, 0xA4);
-
- mxc_request_iomux(MX53_PIN_EIM_D29, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_EIM_D29, 0xA4);
-
- mxc_request_iomux(MX53_PIN_EIM_D30, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_EIM_D30, 0xA4);
-
- mxc_request_iomux(MX53_PIN_EIM_D31, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_EIM_D31, 0xA4);
-
- /* Address lines */
- mxc_request_iomux(MX53_PIN_EIM_DA0, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_EIM_DA0, 0xA4);
-
- mxc_request_iomux(MX53_PIN_EIM_DA1, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_EIM_DA1, 0xA4);
-
- mxc_request_iomux(MX53_PIN_EIM_DA2, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_EIM_DA2, 0xA4);
-
- mxc_request_iomux(MX53_PIN_EIM_DA3, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_EIM_DA3, 0xA4);
-
- mxc_request_iomux(MX53_PIN_EIM_DA4, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_EIM_DA4, 0xA4);
-
- mxc_request_iomux(MX53_PIN_EIM_DA5, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_EIM_DA5, 0xA4);
-
- mxc_request_iomux(MX53_PIN_EIM_DA6, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_EIM_DA6, 0xA4);
-
- /* other EIM signals for ethernet */
- mxc_request_iomux(MX53_PIN_EIM_OE, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_EIM_RW, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_EIM_CS1, IOMUX_CONFIG_ALT0);
+ /* WEIM bus */
+ imx_iomux_v3_setup_multiple_pads(weim_smc911x_pads,
+ ARRAY_SIZE(weim_smc911x_pads));
}
static void weim_cs1_settings(void)
diff --git a/board/freescale/mx53evk/mx53evk.c b/board/freescale/mx53evk/mx53evk.c
index 1273501..727ad65 100644
--- a/board/freescale/mx53evk/mx53evk.c
+++ b/board/freescale/mx53evk/mx53evk.c
@@ -23,11 +23,10 @@
#include <common.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
-#include <asm/arch/mx5x_pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/clock.h>
-#include <asm/arch/iomux.h>
+#include <asm/arch/iomux-mx53.h>
#include <asm/errno.h>
#include <asm/imx-common/boot_mode.h>
#include <netdev.h>
@@ -49,69 +48,42 @@
return 0;
}
+#define UART_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
+
static void setup_iomux_uart(void)
{
- /* UART1 RXD */
- mxc_request_iomux(MX53_PIN_CSI0_D11, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX53_PIN_CSI0_D11,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU |
- PAD_CTL_ODE_OPENDRAIN_ENABLE);
- mxc_iomux_set_input(MX53_UART1_IPP_UART_RXD_MUX_SELECT_INPUT, 0x1);
+ static const iomux_v3_cfg_t uart_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_CSI0_DAT11__UART1_RXD_MUX, UART_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_CSI0_DAT10__UART1_TXD_MUX, UART_PAD_CTRL),
+ };
- /* UART1 TXD */
- mxc_request_iomux(MX53_PIN_CSI0_D10, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX53_PIN_CSI0_D10,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU |
- PAD_CTL_ODE_OPENDRAIN_ENABLE);
+ imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
}
+#define I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_HYS | PAD_CTL_ODE)
+
static void setup_i2c(unsigned int port_number)
{
+ static const iomux_v3_cfg_t i2c1_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_CSI0_DAT8__I2C1_SDA, I2C_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_CSI0_DAT9__I2C1_SCL, I2C_PAD_CTRL),
+ };
+
+ static const iomux_v3_cfg_t i2c2_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_KEY_ROW3__I2C2_SDA, I2C_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_KEY_COL3__I2C2_SCL, I2C_PAD_CTRL),
+ };
+
switch (port_number) {
case 0:
- /* i2c1 SDA */
- mxc_request_iomux(MX53_PIN_CSI0_D8,
- IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION);
- mxc_iomux_set_input(MX53_I2C1_IPP_SDA_IN_SELECT_INPUT,
- INPUT_CTL_PATH0);
- mxc_iomux_set_pad(MX53_PIN_CSI0_D8,
- PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
- PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE |
- PAD_CTL_ODE_OPENDRAIN_ENABLE);
- /* i2c1 SCL */
- mxc_request_iomux(MX53_PIN_CSI0_D9,
- IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION);
- mxc_iomux_set_input(MX53_I2C1_IPP_SCL_IN_SELECT_INPUT,
- INPUT_CTL_PATH0);
- mxc_iomux_set_pad(MX53_PIN_CSI0_D9,
- PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
- PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE |
- PAD_CTL_ODE_OPENDRAIN_ENABLE);
+ imx_iomux_v3_setup_multiple_pads(i2c1_pads,
+ ARRAY_SIZE(i2c1_pads));
break;
case 1:
- /* i2c2 SDA */
- mxc_request_iomux(MX53_PIN_KEY_ROW3,
- IOMUX_CONFIG_ALT4 | IOMUX_CONFIG_SION);
- mxc_iomux_set_input(MX53_I2C2_IPP_SDA_IN_SELECT_INPUT,
- INPUT_CTL_PATH0);
- mxc_iomux_set_pad(MX53_PIN_KEY_ROW3,
- PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
- PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE |
- PAD_CTL_ODE_OPENDRAIN_ENABLE);
-
- /* i2c2 SCL */
- mxc_request_iomux(MX53_PIN_KEY_COL3,
- IOMUX_CONFIG_ALT4 | IOMUX_CONFIG_SION);
- mxc_iomux_set_input(MX53_I2C2_IPP_SCL_IN_SELECT_INPUT,
- INPUT_CTL_PATH0);
- mxc_iomux_set_pad(MX53_PIN_KEY_COL3,
- PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
- PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE |
- PAD_CTL_ODE_OPENDRAIN_ENABLE);
+ imx_iomux_v3_setup_multiple_pads(i2c2_pads,
+ ARRAY_SIZE(i2c2_pads));
break;
default:
printf("Warning: Wrong I2C port number\n");
@@ -160,54 +132,26 @@
static void setup_iomux_fec(void)
{
- /*FEC_MDIO*/
- mxc_request_iomux(MX53_PIN_FEC_MDIO, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_MDIO,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_22K_PU | PAD_CTL_ODE_OPENDRAIN_ENABLE);
- mxc_iomux_set_input(MX53_FEC_FEC_MDI_SELECT_INPUT, 0x1);
+ static const iomux_v3_cfg_t fec_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_FEC_MDIO__FEC_MDIO, PAD_CTL_HYS |
+ PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP | PAD_CTL_ODE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_MDC__FEC_MDC, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_FEC_RXD1__FEC_RDATA_1,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_RXD0__FEC_RDATA_0,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_TXD1__FEC_TDATA_1, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_FEC_TXD0__FEC_TDATA_0, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_FEC_TX_EN__FEC_TX_EN, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_RX_ER__FEC_RX_ER,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ };
- /*FEC_MDC*/
- mxc_request_iomux(MX53_PIN_FEC_MDC, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_MDC, PAD_CTL_DRV_HIGH);
-
- /* FEC RXD1 */
- mxc_request_iomux(MX53_PIN_FEC_RXD1, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_RXD1,
- PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
-
- /* FEC RXD0 */
- mxc_request_iomux(MX53_PIN_FEC_RXD0, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_RXD0,
- PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
-
- /* FEC TXD1 */
- mxc_request_iomux(MX53_PIN_FEC_TXD1, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_TXD1, PAD_CTL_DRV_HIGH);
-
- /* FEC TXD0 */
- mxc_request_iomux(MX53_PIN_FEC_TXD0, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_TXD0, PAD_CTL_DRV_HIGH);
-
- /* FEC TX_EN */
- mxc_request_iomux(MX53_PIN_FEC_TX_EN, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_TX_EN, PAD_CTL_DRV_HIGH);
-
- /* FEC TX_CLK */
- mxc_request_iomux(MX53_PIN_FEC_REF_CLK, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_REF_CLK,
- PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
-
- /* FEC RX_ER */
- mxc_request_iomux(MX53_PIN_FEC_RX_ER, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_RX_ER,
- PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
-
- /* FEC CRS */
- mxc_request_iomux(MX53_PIN_FEC_CRS_DV, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_CRS_DV,
- PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
+ imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
}
#ifdef CONFIG_FSL_ESDHC
@@ -221,9 +165,9 @@
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
int ret;
- mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1);
+ imx_iomux_v3_setup_pad(MX53_PAD_EIM_DA11__GPIO3_11);
gpio_direction_input(IMX_GPIO_NR(3, 11));
- mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1);
+ imx_iomux_v3_setup_pad(MX53_PAD_EIM_DA13__GPIO3_13);
gpio_direction_input(IMX_GPIO_NR(3, 13));
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
@@ -234,8 +178,38 @@
return ret;
}
+#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_PUS_100K_UP)
+#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \
+ PAD_CTL_DSE_HIGH)
+
int board_mmc_init(bd_t *bis)
{
+ static const iomux_v3_cfg_t sd1_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL),
+ MX53_PAD_EIM_DA13__GPIO3_13,
+ };
+
+ static const iomux_v3_cfg_t sd2_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
+ SD_CMD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_IORDY__ESDHC3_CLK, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA8__ESDHC3_DAT0, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA9__ESDHC3_DAT1, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA10__ESDHC3_DAT2, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA11__ESDHC3_DAT3, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA0__ESDHC3_DAT4, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA1__ESDHC3_DAT5, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA2__ESDHC3_DAT6, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA3__ESDHC3_DAT7, SD_PAD_CTRL),
+ MX53_PAD_EIM_DA11__GPIO3_11,
+ };
+
u32 index;
s32 status = 0;
@@ -245,109 +219,12 @@
for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
switch (index) {
case 0:
- mxc_request_iomux(MX53_PIN_SD1_CMD, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_SD1_CLK, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_SD1_DATA0,
- IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_SD1_DATA1,
- IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_SD1_DATA2,
- IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_SD1_DATA3,
- IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_EIM_DA13,
- IOMUX_CONFIG_ALT1);
-
- mxc_iomux_set_pad(MX53_PIN_SD1_CMD,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX53_PIN_SD1_CLK,
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
- PAD_CTL_DRV_HIGH);
- mxc_iomux_set_pad(MX53_PIN_SD1_DATA0,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
- mxc_iomux_set_pad(MX53_PIN_SD1_DATA1,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
- mxc_iomux_set_pad(MX53_PIN_SD1_DATA2,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
- mxc_iomux_set_pad(MX53_PIN_SD1_DATA3,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
+ imx_iomux_v3_setup_multiple_pads(sd1_pads,
+ ARRAY_SIZE(sd1_pads));
break;
case 1:
- mxc_request_iomux(MX53_PIN_ATA_RESET_B,
- IOMUX_CONFIG_ALT2);
- mxc_request_iomux(MX53_PIN_ATA_IORDY,
- IOMUX_CONFIG_ALT2);
- mxc_request_iomux(MX53_PIN_ATA_DATA8,
- IOMUX_CONFIG_ALT4);
- mxc_request_iomux(MX53_PIN_ATA_DATA9,
- IOMUX_CONFIG_ALT4);
- mxc_request_iomux(MX53_PIN_ATA_DATA10,
- IOMUX_CONFIG_ALT4);
- mxc_request_iomux(MX53_PIN_ATA_DATA11,
- IOMUX_CONFIG_ALT4);
- mxc_request_iomux(MX53_PIN_ATA_DATA0,
- IOMUX_CONFIG_ALT4);
- mxc_request_iomux(MX53_PIN_ATA_DATA1,
- IOMUX_CONFIG_ALT4);
- mxc_request_iomux(MX53_PIN_ATA_DATA2,
- IOMUX_CONFIG_ALT4);
- mxc_request_iomux(MX53_PIN_ATA_DATA3,
- IOMUX_CONFIG_ALT4);
- mxc_request_iomux(MX53_PIN_EIM_DA11,
- IOMUX_CONFIG_ALT1);
-
- mxc_iomux_set_pad(MX53_PIN_ATA_RESET_B,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX53_PIN_ATA_IORDY,
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
- PAD_CTL_DRV_HIGH);
- mxc_iomux_set_pad(MX53_PIN_ATA_DATA8,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
- mxc_iomux_set_pad(MX53_PIN_ATA_DATA9,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
- mxc_iomux_set_pad(MX53_PIN_ATA_DATA10,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
- mxc_iomux_set_pad(MX53_PIN_ATA_DATA11,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
- mxc_iomux_set_pad(MX53_PIN_ATA_DATA0,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
- mxc_iomux_set_pad(MX53_PIN_ATA_DATA1,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
- mxc_iomux_set_pad(MX53_PIN_ATA_DATA2,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
- mxc_iomux_set_pad(MX53_PIN_ATA_DATA3,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
-
+ imx_iomux_v3_setup_multiple_pads(sd2_pads,
+ ARRAY_SIZE(sd2_pads));
break;
default:
printf("Warning: you configured more ESDHC controller"
diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c
index 8f39c38..10e9d36 100644
--- a/board/freescale/mx53loco/mx53loco.c
+++ b/board/freescale/mx53loco/mx53loco.c
@@ -24,11 +24,10 @@
#include <common.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
-#include <asm/arch/mx5x_pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/clock.h>
-#include <asm/arch/iomux.h>
+#include <asm/arch/iomux-mx53.h>
#include <asm/arch/clock.h>
#include <asm/errno.h>
#include <asm/imx-common/mx5_video.h>
@@ -82,86 +81,51 @@
return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8;
}
+#define UART_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
+
static void setup_iomux_uart(void)
{
- /* UART1 RXD */
- mxc_request_iomux(MX53_PIN_CSI0_D11, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX53_PIN_CSI0_D11,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU |
- PAD_CTL_ODE_OPENDRAIN_ENABLE);
- mxc_iomux_set_input(MX53_UART1_IPP_UART_RXD_MUX_SELECT_INPUT, 0x1);
+ static const iomux_v3_cfg_t uart_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_CSI0_DAT11__UART1_RXD_MUX, UART_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_CSI0_DAT10__UART1_TXD_MUX, UART_PAD_CTRL),
+ };
- /* UART1 TXD */
- mxc_request_iomux(MX53_PIN_CSI0_D10, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX53_PIN_CSI0_D10,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU |
- PAD_CTL_ODE_OPENDRAIN_ENABLE);
+ imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
}
#ifdef CONFIG_USB_EHCI_MX5
int board_ehci_hcd_init(int port)
{
/* request VBUS power enable pin, GPIO7_8 */
- mxc_request_iomux(MX53_PIN_ATA_DA_2, IOMUX_CONFIG_ALT1);
- gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_ATA_DA_2), 1);
+ imx_iomux_v3_setup_pad(MX53_PAD_PATA_DA_2__GPIO7_8);
+ gpio_direction_output(IMX_GPIO_NR(7, 8), 1);
return 0;
}
#endif
static void setup_iomux_fec(void)
{
- /*FEC_MDIO*/
- mxc_request_iomux(MX53_PIN_FEC_MDIO, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_MDIO,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_22K_PU | PAD_CTL_ODE_OPENDRAIN_ENABLE);
- mxc_iomux_set_input(MX53_FEC_FEC_MDI_SELECT_INPUT, 0x1);
+ static const iomux_v3_cfg_t fec_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_FEC_MDIO__FEC_MDIO, PAD_CTL_HYS |
+ PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP | PAD_CTL_ODE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_MDC__FEC_MDC, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_FEC_RXD1__FEC_RDATA_1,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_RXD0__FEC_RDATA_0,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_TXD1__FEC_TDATA_1, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_FEC_TXD0__FEC_TDATA_0, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_FEC_TX_EN__FEC_TX_EN, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_RX_ER__FEC_RX_ER,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ };
- /*FEC_MDC*/
- mxc_request_iomux(MX53_PIN_FEC_MDC, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_MDC, PAD_CTL_DRV_HIGH);
-
- /* FEC RXD1 */
- mxc_request_iomux(MX53_PIN_FEC_RXD1, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_RXD1,
- PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
-
- /* FEC RXD0 */
- mxc_request_iomux(MX53_PIN_FEC_RXD0, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_RXD0,
- PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
-
- /* FEC TXD1 */
- mxc_request_iomux(MX53_PIN_FEC_TXD1, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_TXD1, PAD_CTL_DRV_HIGH);
-
- /* FEC TXD0 */
- mxc_request_iomux(MX53_PIN_FEC_TXD0, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_TXD0, PAD_CTL_DRV_HIGH);
-
- /* FEC TX_EN */
- mxc_request_iomux(MX53_PIN_FEC_TX_EN, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_TX_EN, PAD_CTL_DRV_HIGH);
-
- /* FEC TX_CLK */
- mxc_request_iomux(MX53_PIN_FEC_REF_CLK, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_REF_CLK,
- PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
-
- /* FEC RX_ER */
- mxc_request_iomux(MX53_PIN_FEC_RX_ER, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_RX_ER,
- PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
-
- /* FEC CRS */
- mxc_request_iomux(MX53_PIN_FEC_CRS_DV, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_CRS_DV,
- PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
+ imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
}
#ifdef CONFIG_FSL_ESDHC
@@ -175,9 +139,9 @@
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
int ret;
- mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1);
+ imx_iomux_v3_setup_pad(MX53_PAD_EIM_DA11__GPIO3_11);
gpio_direction_input(IMX_GPIO_NR(3, 11));
- mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1);
+ imx_iomux_v3_setup_pad(MX53_PAD_EIM_DA13__GPIO3_13);
gpio_direction_input(IMX_GPIO_NR(3, 13));
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
@@ -188,8 +152,38 @@
return ret;
}
+#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_PUS_100K_UP)
+#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \
+ PAD_CTL_DSE_HIGH)
+
int board_mmc_init(bd_t *bis)
{
+ static const iomux_v3_cfg_t sd1_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL),
+ MX53_PAD_EIM_DA13__GPIO3_13,
+ };
+
+ static const iomux_v3_cfg_t sd2_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
+ SD_CMD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_IORDY__ESDHC3_CLK, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA8__ESDHC3_DAT0, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA9__ESDHC3_DAT1, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA10__ESDHC3_DAT2, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA11__ESDHC3_DAT3, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA0__ESDHC3_DAT4, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA1__ESDHC3_DAT5, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA2__ESDHC3_DAT6, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA3__ESDHC3_DAT7, SD_PAD_CTRL),
+ MX53_PAD_EIM_DA11__GPIO3_11,
+ };
+
u32 index;
s32 status = 0;
@@ -199,109 +193,12 @@
for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
switch (index) {
case 0:
- mxc_request_iomux(MX53_PIN_SD1_CMD, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_SD1_CLK, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_SD1_DATA0,
- IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_SD1_DATA1,
- IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_SD1_DATA2,
- IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_SD1_DATA3,
- IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_EIM_DA13,
- IOMUX_CONFIG_ALT1);
-
- mxc_iomux_set_pad(MX53_PIN_SD1_CMD,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX53_PIN_SD1_CLK,
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
- PAD_CTL_DRV_HIGH);
- mxc_iomux_set_pad(MX53_PIN_SD1_DATA0,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
- mxc_iomux_set_pad(MX53_PIN_SD1_DATA1,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
- mxc_iomux_set_pad(MX53_PIN_SD1_DATA2,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
- mxc_iomux_set_pad(MX53_PIN_SD1_DATA3,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
+ imx_iomux_v3_setup_multiple_pads(sd1_pads,
+ ARRAY_SIZE(sd1_pads));
break;
case 1:
- mxc_request_iomux(MX53_PIN_ATA_RESET_B,
- IOMUX_CONFIG_ALT2);
- mxc_request_iomux(MX53_PIN_ATA_IORDY,
- IOMUX_CONFIG_ALT2);
- mxc_request_iomux(MX53_PIN_ATA_DATA8,
- IOMUX_CONFIG_ALT4);
- mxc_request_iomux(MX53_PIN_ATA_DATA9,
- IOMUX_CONFIG_ALT4);
- mxc_request_iomux(MX53_PIN_ATA_DATA10,
- IOMUX_CONFIG_ALT4);
- mxc_request_iomux(MX53_PIN_ATA_DATA11,
- IOMUX_CONFIG_ALT4);
- mxc_request_iomux(MX53_PIN_ATA_DATA0,
- IOMUX_CONFIG_ALT4);
- mxc_request_iomux(MX53_PIN_ATA_DATA1,
- IOMUX_CONFIG_ALT4);
- mxc_request_iomux(MX53_PIN_ATA_DATA2,
- IOMUX_CONFIG_ALT4);
- mxc_request_iomux(MX53_PIN_ATA_DATA3,
- IOMUX_CONFIG_ALT4);
- mxc_request_iomux(MX53_PIN_EIM_DA11,
- IOMUX_CONFIG_ALT1);
-
- mxc_iomux_set_pad(MX53_PIN_ATA_RESET_B,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX53_PIN_ATA_IORDY,
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
- PAD_CTL_DRV_HIGH);
- mxc_iomux_set_pad(MX53_PIN_ATA_DATA8,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
- mxc_iomux_set_pad(MX53_PIN_ATA_DATA9,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
- mxc_iomux_set_pad(MX53_PIN_ATA_DATA10,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
- mxc_iomux_set_pad(MX53_PIN_ATA_DATA11,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
- mxc_iomux_set_pad(MX53_PIN_ATA_DATA0,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
- mxc_iomux_set_pad(MX53_PIN_ATA_DATA1,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
- mxc_iomux_set_pad(MX53_PIN_ATA_DATA2,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
- mxc_iomux_set_pad(MX53_PIN_ATA_DATA3,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
-
+ imx_iomux_v3_setup_multiple_pads(sd2_pads,
+ ARRAY_SIZE(sd2_pads));
break;
default:
printf("Warning: you configured more ESDHC controller"
@@ -316,28 +213,17 @@
}
#endif
+#define I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
+
static void setup_iomux_i2c(void)
{
- /* I2C1 SDA */
- mxc_request_iomux(MX53_PIN_CSI0_D8,
- IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION);
- mxc_iomux_set_input(MX53_I2C1_IPP_SDA_IN_SELECT_INPUT,
- INPUT_CTL_PATH0);
- mxc_iomux_set_pad(MX53_PIN_CSI0_D8,
- PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
- PAD_CTL_100K_PU | PAD_CTL_PKE_ENABLE |
- PAD_CTL_PUE_PULL |
- PAD_CTL_ODE_OPENDRAIN_ENABLE);
- /* I2C1 SCL */
- mxc_request_iomux(MX53_PIN_CSI0_D9,
- IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION);
- mxc_iomux_set_input(MX53_I2C1_IPP_SCL_IN_SELECT_INPUT,
- INPUT_CTL_PATH0);
- mxc_iomux_set_pad(MX53_PIN_CSI0_D9,
- PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
- PAD_CTL_100K_PU | PAD_CTL_PKE_ENABLE |
- PAD_CTL_PUE_PULL |
- PAD_CTL_ODE_OPENDRAIN_ENABLE);
+ static const iomux_v3_cfg_t i2c1_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_CSI0_DAT8__I2C1_SDA, I2C_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_CSI0_DAT9__I2C1_SCL, I2C_PAD_CTRL),
+ };
+
+ imx_iomux_v3_setup_multiple_pads(i2c1_pads, ARRAY_SIZE(i2c1_pads));
}
static int power_init(void)
diff --git a/board/freescale/mx53loco/mx53loco_video.c b/board/freescale/mx53loco/mx53loco_video.c
index a4d5a6a..c4654c9 100644
--- a/board/freescale/mx53loco/mx53loco_video.c
+++ b/board/freescale/mx53loco/mx53loco_video.c
@@ -24,7 +24,7 @@
#include <common.h>
#include <linux/list.h>
#include <asm/gpio.h>
-#include <asm/arch/iomux.h>
+#include <asm/arch/iomux-mx53.h>
#include <linux/fb.h>
#include <ipu_pixfmt.h>
@@ -63,42 +63,46 @@
void setup_iomux_lcd(void)
{
- mxc_request_iomux(MX53_PIN_DI0_DISP_CLK, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DI0_PIN15, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DI0_PIN2, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DI0_PIN3, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT0, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT1, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT2, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT3, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT4, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT5, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT6, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT7, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT8, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT9, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT10, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT11, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT12, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT13, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT14, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT15, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT16, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT17, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT18, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT19, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT20, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT21, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT22, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT23, IOMUX_CONFIG_ALT0);
+ static const iomux_v3_cfg_t lcd_pads[] = {
+ MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK,
+ MX53_PAD_DI0_PIN15__IPU_DI0_PIN15,
+ MX53_PAD_DI0_PIN2__IPU_DI0_PIN2,
+ MX53_PAD_DI0_PIN3__IPU_DI0_PIN3,
+ MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0,
+ MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1,
+ MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2,
+ MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3,
+ MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4,
+ MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5,
+ MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6,
+ MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7,
+ MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8,
+ MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9,
+ MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10,
+ MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11,
+ MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12,
+ MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13,
+ MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14,
+ MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15,
+ MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16,
+ MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17,
+ MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18,
+ MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19,
+ MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20,
+ MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21,
+ MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22,
+ MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23,
+ };
+
+ imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
/* Turn on GPIO backlight */
- mxc_request_iomux(MX53_PIN_EIM_D24, IOMUX_CONFIG_ALT1);
+ imx_iomux_v3_setup_pad(MX53_PAD_EIM_D24__GPIO3_24);
gpio_direction_output(MX53LOCO_LCD_POWER, 1);
/* Turn on display contrast */
- mxc_request_iomux(MX53_PIN_GPIO_1, IOMUX_CONFIG_ALT1);
- gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_GPIO_1), 1);
+ imx_iomux_v3_setup_pad(MX53_PAD_GPIO_1__GPIO1_1);
+ gpio_direction_output(IMX_GPIO_NR(1, 1), 1);
}
int board_video_skip(void)
diff --git a/board/freescale/mx53smd/mx53smd.c b/board/freescale/mx53smd/mx53smd.c
index 761f727..d04f44f 100644
--- a/board/freescale/mx53smd/mx53smd.c
+++ b/board/freescale/mx53smd/mx53smd.c
@@ -23,11 +23,10 @@
#include <common.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
-#include <asm/arch/mx5x_pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/clock.h>
-#include <asm/arch/iomux.h>
+#include <asm/arch/iomux-mx53.h>
#include <asm/errno.h>
#include <netdev.h>
#include <mmc.h>
@@ -56,76 +55,41 @@
gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
}
+#define UART_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
+
static void setup_iomux_uart(void)
{
- /* UART1 RXD */
- mxc_request_iomux(MX53_PIN_CSI0_D11, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX53_PIN_CSI0_D11,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU |
- PAD_CTL_ODE_OPENDRAIN_ENABLE);
- mxc_iomux_set_input(MX53_UART1_IPP_UART_RXD_MUX_SELECT_INPUT, 0x1);
+ static const iomux_v3_cfg_t uart_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_CSI0_DAT11__UART1_RXD_MUX, UART_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_CSI0_DAT10__UART1_TXD_MUX, UART_PAD_CTRL),
+ };
- /* UART1 TXD */
- mxc_request_iomux(MX53_PIN_CSI0_D10, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX53_PIN_CSI0_D10,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU |
- PAD_CTL_ODE_OPENDRAIN_ENABLE);
+ imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
}
static void setup_iomux_fec(void)
{
- /*FEC_MDIO*/
- mxc_request_iomux(MX53_PIN_FEC_MDIO, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_MDIO,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_22K_PU | PAD_CTL_ODE_OPENDRAIN_ENABLE);
- mxc_iomux_set_input(MX53_FEC_FEC_MDI_SELECT_INPUT, 0x1);
+ static const iomux_v3_cfg_t fec_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_FEC_MDIO__FEC_MDIO, PAD_CTL_HYS |
+ PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP | PAD_CTL_ODE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_MDC__FEC_MDC, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_FEC_RXD1__FEC_RDATA_1,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_RXD0__FEC_RDATA_0,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_TXD1__FEC_TDATA_1, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_FEC_TXD0__FEC_TDATA_0, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_FEC_TX_EN__FEC_TX_EN, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_RX_ER__FEC_RX_ER,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ };
- /*FEC_MDC*/
- mxc_request_iomux(MX53_PIN_FEC_MDC, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_MDC, PAD_CTL_DRV_HIGH);
-
- /* FEC RXD1 */
- mxc_request_iomux(MX53_PIN_FEC_RXD1, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_RXD1,
- PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
-
- /* FEC RXD0 */
- mxc_request_iomux(MX53_PIN_FEC_RXD0, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_RXD0,
- PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
-
- /* FEC TXD1 */
- mxc_request_iomux(MX53_PIN_FEC_TXD1, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_TXD1, PAD_CTL_DRV_HIGH);
-
- /* FEC TXD0 */
- mxc_request_iomux(MX53_PIN_FEC_TXD0, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_TXD0, PAD_CTL_DRV_HIGH);
-
- /* FEC TX_EN */
- mxc_request_iomux(MX53_PIN_FEC_TX_EN, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_TX_EN, PAD_CTL_DRV_HIGH);
-
- /* FEC TX_CLK */
- mxc_request_iomux(MX53_PIN_FEC_REF_CLK, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_REF_CLK,
- PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
-
- /* FEC RX_ER */
- mxc_request_iomux(MX53_PIN_FEC_RX_ER, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_RX_ER,
- PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
-
- /* FEC CRS */
- mxc_request_iomux(MX53_PIN_FEC_CRS_DV, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX53_PIN_FEC_CRS_DV,
- PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
+ imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
}
#ifdef CONFIG_FSL_ESDHC
@@ -135,13 +99,28 @@
int board_mmc_getcd(struct mmc *mmc)
{
- mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1);
+ imx_iomux_v3_setup_pad(MX53_PAD_EIM_DA13__GPIO3_13);
gpio_direction_input(IMX_GPIO_NR(3, 13));
return !gpio_get_value(IMX_GPIO_NR(3, 13));
}
+#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_PUS_100K_UP)
+#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \
+ PAD_CTL_DSE_HIGH)
+
int board_mmc_init(bd_t *bis)
{
+ static const iomux_v3_cfg_t sd1_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL),
+ MX53_PAD_EIM_DA13__GPIO3_13,
+ };
+
u32 index;
s32 status = 0;
@@ -150,43 +129,8 @@
for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
switch (index) {
case 0:
- mxc_request_iomux(MX53_PIN_SD1_CMD, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_SD1_CLK, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_SD1_DATA0,
- IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_SD1_DATA1,
- IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_SD1_DATA2,
- IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_SD1_DATA3,
- IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_EIM_DA13,
- IOMUX_CONFIG_ALT1);
-
- mxc_iomux_set_pad(MX53_PIN_SD1_CMD,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX53_PIN_SD1_CLK,
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
- PAD_CTL_DRV_HIGH);
- mxc_iomux_set_pad(MX53_PIN_SD1_DATA0,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
- mxc_iomux_set_pad(MX53_PIN_SD1_DATA1,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
- mxc_iomux_set_pad(MX53_PIN_SD1_DATA2,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
- mxc_iomux_set_pad(MX53_PIN_SD1_DATA3,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
- PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
+ imx_iomux_v3_setup_multiple_pads(sd1_pads,
+ ARRAY_SIZE(sd1_pads));
break;
default:
diff --git a/board/freescale/mx6qarm2/mx6qarm2.c b/board/freescale/mx6qarm2/mx6qarm2.c
index ff7f5e8..e336746 100644
--- a/board/freescale/mx6qarm2/mx6qarm2.c
+++ b/board/freescale/mx6qarm2/mx6qarm2.c
@@ -35,17 +35,16 @@
DECLARE_GLOBAL_DATA_PTR;
-#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
+ PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
- PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
+ PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
+ PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-#define ENET_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
int dram_init(void)
{
diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
index aec3286..2a6e3a9 100644
--- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c
+++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
@@ -26,26 +26,33 @@
#include <asm/errno.h>
#include <asm/gpio.h>
#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/mxc_i2c.h>
#include <asm/imx-common/boot_mode.h>
#include <mmc.h>
#include <fsl_esdhc.h>
#include <miiphy.h>
#include <netdev.h>
#include <asm/arch/sys_proto.h>
+#include <i2c.h>
DECLARE_GLOBAL_DATA_PTR;
-#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
+ PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
- PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
+ PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
+ PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-#define ENET_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+
+#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
+ PAD_CTL_ODE | PAD_CTL_SRE_FAST)
+
+#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
int dram_init(void)
{
@@ -77,6 +84,45 @@
MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
};
+/* I2C2 PMIC, iPod, Tuner, Codec, Touch, HDMI EDID, MIPI CSI2 card */
+struct i2c_pads_info i2c_pad_info1 = {
+ .scl = {
+ .i2c_mode = MX6_PAD_EIM_EB2__I2C2_SCL | PC,
+ .gpio_mode = MX6_PAD_EIM_EB2__GPIO_2_30 | PC,
+ .gp = IMX_GPIO_NR(2, 30)
+ },
+ .sda = {
+ .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | PC,
+ .gpio_mode = MX6_PAD_KEY_ROW3__GPIO_4_13 | PC,
+ .gp = IMX_GPIO_NR(4, 13)
+ }
+};
+
+/*
+ * I2C3 MLB, Port Expanders (A, B, C), Video ADC, Light Sensor,
+ * Compass Sensor, Accelerometer, Res Touch
+ */
+struct i2c_pads_info i2c_pad_info2 = {
+ .scl = {
+ .i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | PC,
+ .gpio_mode = MX6_PAD_GPIO_3__GPIO_1_3 | PC,
+ .gp = IMX_GPIO_NR(1, 3)
+ },
+ .sda = {
+ .i2c_mode = MX6_PAD_EIM_D18__I2C3_SDA | PC,
+ .gpio_mode = MX6_PAD_EIM_D18__GPIO_3_18 | PC,
+ .gp = IMX_GPIO_NR(3, 18)
+ }
+};
+
+iomux_v3_cfg_t const i2c3_pads[] = {
+ MX6_PAD_EIM_A24__GPIO_5_4 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+iomux_v3_cfg_t const port_exp[] = {
+ MX6_PAD_SD2_DAT0__GPIO_1_15 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
static void setup_iomux_enet(void)
{
imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
@@ -179,7 +225,10 @@
* i.MX6Q ARD RevB: 0x02
*/
struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
- int reg = readl(&ocotp->gp1);
+ struct fuse_bank *bank = &ocotp->bank[4];
+ struct fuse_bank4_regs *fuse =
+ (struct fuse_bank4_regs *)bank->fuse_regs;
+ int reg = readl(&fuse->gp1);
int ret;
switch (reg >> 8 & 0x0F) {
@@ -214,6 +263,16 @@
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+ /* I2C 2 and 3 setup - I2C 3 hw mux with EIM */
+ setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
+ /* I2C 3 Steer */
+ gpio_direction_output(IMX_GPIO_NR(5, 4), 1);
+ imx_iomux_v3_setup_multiple_pads(i2c3_pads, ARRAY_SIZE(i2c3_pads));
+ setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
+
+ gpio_direction_output(IMX_GPIO_NR(1, 15), 1);
+ imx_iomux_v3_setup_multiple_pads(port_exp, ARRAY_SIZE(port_exp));
+
return 0;
}
diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
index 9f9cac8..862bc30 100644
--- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
+++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
@@ -45,29 +45,25 @@
DECLARE_GLOBAL_DATA_PTR;
-#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
+ PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
- PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
+ PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
+ PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-#define ENET_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
-#define SPI_PAD_CTRL (PAD_CTL_HYS | \
- PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_MED | \
+#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
-#define BUTTON_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+#define BUTTON_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
-#define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
+#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
PAD_CTL_ODE | PAD_CTL_SRE_FAST)
int dram_init(void)
@@ -312,7 +308,6 @@
void setup_spi(void)
{
- gpio_direction_output(CONFIG_SF_DEFAULT_CS, 1);
imx_iomux_v3_setup_multiple_pads(ecspi1_pads,
ARRAY_SIZE(ecspi1_pads));
}
diff --git a/board/freescale/mx6qsabresd/mx6qsabresd.c b/board/freescale/mx6qsabresd/mx6qsabresd.c
index 0d7cb9e..2529826 100644
--- a/board/freescale/mx6qsabresd/mx6qsabresd.c
+++ b/board/freescale/mx6qsabresd/mx6qsabresd.c
@@ -34,17 +34,16 @@
DECLARE_GLOBAL_DATA_PTR;
-#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
+ PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
- PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
+ PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
+ PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-#define ENET_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
int dram_init(void)
{
@@ -166,6 +165,7 @@
int board_mmc_init(bd_t *bis)
{
+ s32 status = 0;
int i;
/*
@@ -196,15 +196,15 @@
break;
default:
printf("Warning: you configured more USDHC controllers"
- "(%d) than supported by the board\n", i + 1);
- return 0;
- }
+ "(%d) then supported by the board (%d)\n",
+ i + 1, CONFIG_SYS_FSL_USDHC_NUM);
+ return status;
+ }
- if (fsl_esdhc_initialize(bis, &usdhc_cfg[i]))
- printf("Warning: failed to initialize mmc dev %d\n", i);
+ status |= fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
}
- return 0;
+ return status;
}
#endif
diff --git a/board/freescale/mx6slevk/Makefile b/board/freescale/mx6slevk/Makefile
new file mode 100644
index 0000000..43af351
--- /dev/null
+++ b/board/freescale/mx6slevk/Makefile
@@ -0,0 +1,28 @@
+# (C) Copyright 2013 Freescale Semiconductor, Inc.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := mx6slevk.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/mx6slevk/imximage.cfg b/board/freescale/mx6slevk/imximage.cfg
new file mode 100644
index 0000000..df39a16
--- /dev/null
+++ b/board/freescale/mx6slevk/imximage.cfg
@@ -0,0 +1,118 @@
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+/* image version */
+
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+
+BOOT_FROM sd
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
+DATA 4 0x020c4018 0x00260324
+
+DATA 4 0x020c4068 0xffffffff
+DATA 4 0x020c406c 0xffffffff
+DATA 4 0x020c4070 0xffffffff
+DATA 4 0x020c4074 0xffffffff
+DATA 4 0x020c4078 0xffffffff
+DATA 4 0x020c407c 0xffffffff
+DATA 4 0x020c4080 0xffffffff
+
+DATA 4 0x020e0344 0x00003030
+DATA 4 0x020e0348 0x00003030
+DATA 4 0x020e034c 0x00003030
+DATA 4 0x020e0350 0x00003030
+DATA 4 0x020e030c 0x00000030
+DATA 4 0x020e0310 0x00000030
+DATA 4 0x020e0314 0x00000030
+DATA 4 0x020e0318 0x00000030
+DATA 4 0x020e0300 0x00000030
+DATA 4 0x020e031c 0x00000030
+DATA 4 0x020e0338 0x00000028
+DATA 4 0x020e0320 0x00000030
+DATA 4 0x020e032c 0x00000000
+DATA 4 0x020e033c 0x00000008
+DATA 4 0x020e0340 0x00000008
+DATA 4 0x020e05c4 0x00000030
+DATA 4 0x020e05cc 0x00000030
+DATA 4 0x020e05d4 0x00000030
+DATA 4 0x020e05d8 0x00000030
+DATA 4 0x020e05ac 0x00000030
+DATA 4 0x020e05c8 0x00000030
+DATA 4 0x020e05b0 0x00020000
+DATA 4 0x020e05b4 0x00000000
+DATA 4 0x020e05c0 0x00020000
+DATA 4 0x020e05d0 0x00080000
+
+DATA 4 0x021b001c 0x00008000
+DATA 4 0x021b085c 0x1b4700c7
+DATA 4 0x021b0800 0xa1390003
+DATA 4 0x021b0890 0x00300000
+DATA 4 0x021b08b8 0x00000800
+DATA 4 0x021b081c 0x33333333
+DATA 4 0x021b0820 0x33333333
+DATA 4 0x021b0824 0x33333333
+DATA 4 0x021b0828 0x33333333
+DATA 4 0x021b082c 0xf3333333
+DATA 4 0x021b0830 0xf3333333
+DATA 4 0x021b0834 0xf3333333
+DATA 4 0x021b0838 0xf3333333
+DATA 4 0x021b0848 0x4241444a
+DATA 4 0x021b0850 0x3030312b
+DATA 4 0x021b083c 0x20000000
+DATA 4 0x021b0840 0x00000000
+DATA 4 0x021b08c0 0x24911492
+DATA 4 0x021b08b8 0x00000800
+DATA 4 0x021b000c 0x33374133
+DATA 4 0x021b0004 0x00020024
+DATA 4 0x021b0010 0x00100A82
+DATA 4 0x021b0014 0x00000093
+DATA 4 0x021b0018 0x00001688
+DATA 4 0x021b002c 0x0f9f26d2
+DATA 4 0x021b0030 0x0000020e
+DATA 4 0x021b0038 0x00190778
+DATA 4 0x021b0008 0x00000000
+DATA 4 0x021b0040 0x0000004f
+DATA 4 0x021b0000 0xc3110000
+DATA 4 0x021b001c 0x003f8030
+DATA 4 0x021b001c 0xff0a8030
+DATA 4 0x021b001c 0x82018030
+DATA 4 0x021b001c 0x04028030
+DATA 4 0x021b001c 0x02038030
+DATA 4 0x021b001c 0xff0a8038
+DATA 4 0x021b001c 0x82018038
+DATA 4 0x021b001c 0x04028038
+DATA 4 0x021b001c 0x02038038
+DATA 4 0x021b0800 0xa1310003
+DATA 4 0x021b0020 0x00001800
+DATA 4 0x021b0818 0x00000000
+DATA 4 0x021b08b8 0x00000800
+DATA 4 0x021b0004 0x00025564
+DATA 4 0x021b0404 0x00011006
+DATA 4 0x021b001c 0x00000000
diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c
new file mode 100644
index 0000000..69fe8fc
--- /dev/null
+++ b/board/freescale/mx6slevk/mx6slevk.c
@@ -0,0 +1,102 @@
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <asm/arch/clock.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/io.h>
+#include <asm/sizes.h>
+#include <common.h>
+#include <fsl_esdhc.h>
+#include <mmc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
+ PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+#define USDHC_PAD_CTRL (PAD_CTL_PUS_22K_UP | \
+ PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
+ PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
+
+ return 0;
+}
+
+static iomux_v3_cfg_t const uart1_pads[] = {
+ MX6_PAD_UART1_TXD__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_UART1_RXD__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const usdhc2_pads[] = {
+ MX6_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DAT0__USDHC2_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DAT1__USDHC2_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DAT2__USDHC2_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DAT3__USDHC2_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+};
+
+static void setup_iomux_uart(void)
+{
+ imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+}
+
+static struct fsl_esdhc_cfg usdhc_cfg[1] = {
+ {USDHC2_BASE_ADDR},
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ return 1; /* Assume boot SD always present */
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ imx_iomux_v3_setup_multiple_pads(usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
+
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+ return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
+}
+
+int board_early_init_f(void)
+{
+ setup_iomux_uart();
+ return 0;
+}
+
+int board_init(void)
+{
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+ return 0;
+}
+
+u32 get_board_rev(void)
+{
+ return get_cpu_rev();
+}
+
+int checkboard(void)
+{
+ puts("Board: MX6SLEVK\n");
+
+ return 0;
+}
diff --git a/board/freescale/p2041rdb/p2041rdb.c b/board/freescale/p2041rdb/p2041rdb.c
index a706a6d..44d3e0c 100644
--- a/board/freescale/p2041rdb/p2041rdb.c
+++ b/board/freescale/p2041rdb/p2041rdb.c
@@ -227,6 +227,17 @@
"'00' is unsupported\n");
else
actual[i] = freq[i][clock];
+
+ /*
+ * PC board uses a different CPLD with PB board, this CPLD
+ * has cpld_ver_sub = 1, and pcba_ver = 5. But CPLD on PB
+ * board has cpld_ver_sub = 0, and pcba_ver = 4.
+ */
+ if ((i == 1) && (CPLD_READ(cpld_ver_sub) == 1) &&
+ (CPLD_READ(pcba_ver) == 5)) {
+ /* PC board bank2 frequency */
+ actual[i] = freq[i-1][clock];
+ }
}
for (i = 0; i < NUM_SRDS_BANKS; i++) {
diff --git a/board/freescale/t4qds/eth.c b/board/freescale/t4qds/eth.c
index b649df0..7103a0d 100644
--- a/board/freescale/t4qds/eth.c
+++ b/board/freescale/t4qds/eth.c
@@ -365,24 +365,40 @@
qsgmiiphy_fix[FM1_DTSEC6] = 1;
qsgmiiphy_fix[FM1_DTSEC9] = 1;
qsgmiiphy_fix[FM1_DTSEC10] = 1;
+ slot_qsgmii_phyaddr[1][0] = SGMII_CARD_PORT1_PHY_ADDR;
+ slot_qsgmii_phyaddr[1][1] = SGMII_CARD_PORT2_PHY_ADDR;
+ slot_qsgmii_phyaddr[1][2] = SGMII_CARD_PORT3_PHY_ADDR;
+ slot_qsgmii_phyaddr[1][3] = SGMII_CARD_PORT4_PHY_ADDR;
break;
case 2:
qsgmiiphy_fix[FM1_DTSEC1] = 1;
qsgmiiphy_fix[FM1_DTSEC2] = 1;
qsgmiiphy_fix[FM1_DTSEC3] = 1;
qsgmiiphy_fix[FM1_DTSEC4] = 1;
+ slot_qsgmii_phyaddr[2][0] = SGMII_CARD_PORT1_PHY_ADDR;
+ slot_qsgmii_phyaddr[2][1] = SGMII_CARD_PORT2_PHY_ADDR;
+ slot_qsgmii_phyaddr[2][2] = SGMII_CARD_PORT3_PHY_ADDR;
+ slot_qsgmii_phyaddr[2][3] = SGMII_CARD_PORT4_PHY_ADDR;
break;
case 3:
qsgmiiphy_fix[FM2_DTSEC5] = 1;
qsgmiiphy_fix[FM2_DTSEC6] = 1;
qsgmiiphy_fix[FM2_DTSEC9] = 1;
qsgmiiphy_fix[FM2_DTSEC10] = 1;
+ slot_qsgmii_phyaddr[3][0] = SGMII_CARD_PORT1_PHY_ADDR;
+ slot_qsgmii_phyaddr[3][1] = SGMII_CARD_PORT2_PHY_ADDR;
+ slot_qsgmii_phyaddr[3][2] = SGMII_CARD_PORT3_PHY_ADDR;
+ slot_qsgmii_phyaddr[3][3] = SGMII_CARD_PORT4_PHY_ADDR;
break;
case 4:
qsgmiiphy_fix[FM2_DTSEC1] = 1;
qsgmiiphy_fix[FM2_DTSEC2] = 1;
qsgmiiphy_fix[FM2_DTSEC3] = 1;
qsgmiiphy_fix[FM2_DTSEC4] = 1;
+ slot_qsgmii_phyaddr[4][0] = SGMII_CARD_PORT1_PHY_ADDR;
+ slot_qsgmii_phyaddr[4][1] = SGMII_CARD_PORT2_PHY_ADDR;
+ slot_qsgmii_phyaddr[4][2] = SGMII_CARD_PORT3_PHY_ADDR;
+ slot_qsgmii_phyaddr[4][3] = SGMII_CARD_PORT4_PHY_ADDR;
break;
default:
break;
@@ -435,6 +451,7 @@
t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT7);
t4240qds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2);
+ initialize_qsgmiiphy_fix();
switch (srds_prtcl_s1) {
case 1:
@@ -702,8 +719,6 @@
}
#endif /* CONFIG_SYS_NUM_FMAN */
- initialize_qsgmiiphy_fix();
-
cpu_eth_init(bis);
#endif /* CONFIG_FMAN_ENET */
diff --git a/board/freescale/t4qds/law.c b/board/freescale/t4qds/law.c
index 6f2c5c8..f3848f3 100644
--- a/board/freescale/t4qds/law.c
+++ b/board/freescale/t4qds/law.c
@@ -37,7 +37,8 @@
#endif
SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC),
#ifdef CONFIG_SYS_DCSRBAR_PHYS
- SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR),
+ /* Limit DCSR to 32M to access NPC Trace Buffer */
+ SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR),
#endif
#ifdef CONFIG_SYS_NAND_BASE_PHYS
SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC),
diff --git a/board/freescale/t4qds/t4_pbi.cfg b/board/freescale/t4qds/t4_pbi.cfg
new file mode 100644
index 0000000..c598fb5
--- /dev/null
+++ b/board/freescale/t4qds/t4_pbi.cfg
@@ -0,0 +1,36 @@
+#PBI commands
+#Initialize CPC1
+09010000 00200400
+09138000 00000000
+091380c0 00000100
+#512KB SRAM
+09010100 00000000
+09010104 fff80009
+09010f00 08000000
+#enable CPC1
+09010000 80000000
+#Configure LAW for CPC1
+09000d00 00000000
+09000d04 fff80000
+09000d08 81000012
+#workaround for IFC bus speed
+091241c0 f03f3f3f
+091241c4 ff003f3f
+09124010 00000101
+09124130 0000000c
+#workaround for SERDES A-006031
+090ea000 064740e6
+090ea020 064740e6
+090eb000 064740e6
+090eb020 064740e6
+090ec000 064740e6
+090ec020 064740e6
+090ed000 064740e6
+090ed020 064740e6
+#Configure alternate space
+09000010 00000000
+09000014 ff000000
+09000018 81000000
+#Flush PBL data
+09138000 00000000
+091380c0 00000000
diff --git a/board/freescale/t4qds/t4_rcw.cfg b/board/freescale/t4qds/t4_rcw.cfg
new file mode 100644
index 0000000..6ac95ff
--- /dev/null
+++ b/board/freescale/t4qds/t4_rcw.cfg
@@ -0,0 +1,7 @@
+#PBL preamble and RCW header
+aa55aa55 010e0100
+#serdes protocol 1_28_6_12
+14180019 0c101916 00000000 00000000
+04383060 30548c00 6c020000 19000000
+00000000 ee0000ee 00000000 000187fc
+00000000 00000000 00000000 00000018
diff --git a/board/freescale/t4qds/t4qds.c b/board/freescale/t4qds/t4qds.c
index be6d1c4..f0f280b 100644
--- a/board/freescale/t4qds/t4qds.c
+++ b/board/freescale/t4qds/t4qds.c
@@ -234,7 +234,7 @@
}
-static int adjust_vdd(void)
+static int adjust_vdd(ulong vdd_override)
{
int re_enable = disable_interrupts();
ccsr_gur_t __iomem *gur =
@@ -243,6 +243,8 @@
u8 vid, vid_current;
int vdd_target, vdd_current, vdd_last;
int ret;
+ unsigned long vdd_string_override;
+ char *vdd_string;
static const uint16_t vdd[32] = {
0, /* unused */
9875, /* 0.9875V */
@@ -292,6 +294,19 @@
FSL_CORENET_DCFG_FUSESR_ALTVID_MASK;
}
vdd_target = vdd[vid];
+
+ /* check override variable for overriding VDD */
+ vdd_string = getenv("t4240qds_vdd_mv");
+ if (vdd_override == 0 && vdd_string &&
+ !strict_strtoul(vdd_string, 10, &vdd_string_override))
+ vdd_override = vdd_string_override;
+ if (vdd_override >= 819 && vdd_override <= 1212) {
+ vdd_target = vdd_override * 10; /* convert to 1/10 mV */
+ debug("VDD override is %lu\n", vdd_override);
+ } else if (vdd_override != 0) {
+ printf("Invalid value.\n");
+ }
+
if (vdd_target == 0) {
debug("VID: VID not used\n");
ret = 0;
@@ -511,7 +526,7 @@
* Adjust core voltage according to voltage ID
* This function changes I2C mux to channel 2.
*/
- if (adjust_vdd())
+ if (adjust_vdd(0))
printf("Warning: Adjusting core voltage failed.\n");
/* Configure board SERDES ports crossbar */
@@ -525,6 +540,20 @@
unsigned long get_board_sys_clk(void)
{
u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
+#ifdef CONFIG_FSL_QIXIS_CLOCK_MEASUREMENT
+ /* use accurate clock measurement */
+ int freq = QIXIS_READ(clk_freq[0]) << 8 | QIXIS_READ(clk_freq[1]);
+ int base = QIXIS_READ(clk_base[0]) << 8 | QIXIS_READ(clk_base[1]);
+ u32 val;
+
+ val = freq * base;
+ if (val) {
+ debug("SYS Clock measurement is: %d\n", val);
+ return val;
+ } else {
+ printf("Warning: SYS clock measurement is invalid, using value from brdcfg1.\n");
+ }
+#endif
switch (sysclk_conf & 0x0F) {
case QIXIS_SYSCLK_83:
@@ -548,6 +577,20 @@
unsigned long get_board_ddr_clk(void)
{
u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
+#ifdef CONFIG_FSL_QIXIS_CLOCK_MEASUREMENT
+ /* use accurate clock measurement */
+ int freq = QIXIS_READ(clk_freq[2]) << 8 | QIXIS_READ(clk_freq[3]);
+ int base = QIXIS_READ(clk_base[0]) << 8 | QIXIS_READ(clk_base[1]);
+ u32 val;
+
+ val = freq * base;
+ if (val) {
+ debug("DDR Clock measurement is: %d\n", val);
+ return val;
+ } else {
+ printf("Warning: DDR clock measurement is invalid, using value from brdcfg1.\n");
+ }
+#endif
switch ((ddrclk_conf & 0x30) >> 4) {
case QIXIS_DDRCLK_100:
@@ -643,6 +686,106 @@
}
/*
+ * This function is called by bdinfo to print detail board information.
+ * As an exmaple for future board, we organize the messages into
+ * several sections. If applicable, the message is in the format of
+ * <name> = <value>
+ * It should aligned with normal output of bdinfo command.
+ *
+ * Voltage: Core, DDR and another configurable voltages
+ * Clock : Critical clocks which are not printed already
+ * RCW : RCW source if not printed already
+ * Misc : Other important information not in above catagories
+ */
+void board_detail(void)
+{
+ int i;
+ u8 brdcfg[16], dutcfg[16], rst_ctl;
+ int vdd, rcwsrc;
+ static const char * const clk[] = {"66.67", "100", "125", "133.33"};
+
+ for (i = 0; i < 16; i++) {
+ brdcfg[i] = qixis_read(offsetof(struct qixis, brdcfg[0]) + i);
+ dutcfg[i] = qixis_read(offsetof(struct qixis, dutcfg[0]) + i);
+ }
+
+ /* Voltage secion */
+ if (!select_i2c_ch_pca9547(I2C_MUX_CH_VOL_MONITOR)) {
+ vdd = read_voltage();
+ if (vdd > 0)
+ printf("Core voltage= %d mV\n", vdd);
+ select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+ }
+
+ printf("XVDD = 1.%d V\n", ((brdcfg[8] & 0xf) - 4) * 5 + 25);
+
+ /* clock section */
+ printf("SYSCLK = %s MHz\nDDRCLK = %s MHz\n",
+ clk[(brdcfg[11] >> 2) & 0x3], clk[brdcfg[11] & 3]);
+
+ /* RCW section */
+ rcwsrc = (dutcfg[0] << 1) + (dutcfg[1] & 1);
+ puts("RCW source = ");
+ switch (rcwsrc) {
+ case 0x017:
+ case 0x01f:
+ puts("8-bit NOR\n");
+ break;
+ case 0x027:
+ case 0x02F:
+ puts("16-bit NOR\n");
+ break;
+ case 0x040:
+ puts("SDHC/eMMC\n");
+ break;
+ case 0x044:
+ puts("SPI 16-bit addressing\n");
+ break;
+ case 0x045:
+ puts("SPI 24-bit addressing\n");
+ break;
+ case 0x048:
+ puts("I2C normal addressing\n");
+ break;
+ case 0x049:
+ puts("I2C extended addressing\n");
+ break;
+ case 0x108:
+ case 0x109:
+ case 0x10a:
+ case 0x10b:
+ puts("8-bit NAND, 2KB\n");
+ break;
+ default:
+ if ((rcwsrc >= 0x080) && (rcwsrc <= 0x09f))
+ puts("Hard-coded RCW\n");
+ else if ((rcwsrc >= 0x110) && (rcwsrc <= 0x11f))
+ puts("8-bit NAND, 4KB\n");
+ else
+ puts("unknown\n");
+ break;
+ }
+
+ /* Misc section */
+ rst_ctl = QIXIS_READ(rst_ctl);
+ puts("HRESET_REQ = ");
+ switch (rst_ctl & 0x30) {
+ case 0x00:
+ puts("Ignored\n");
+ break;
+ case 0x10:
+ puts("Assert HRESET\n");
+ break;
+ case 0x30:
+ puts("Reset system\n");
+ break;
+ default:
+ puts("N/A\n");
+ break;
+ }
+}
+
+/*
* Reverse engineering switch settings.
* Some bits cannot be figured out. They will be displayed as
* underscore in binary format. mask[] has those bits.
@@ -658,7 +801,7 @@
* Any bit with 1 means that bit cannot be reverse engineered.
* It will be displayed as _ in binary format.
*/
- static const u8 mask[] = {0, 0, 0, 0, 0, 0x1, 0xdf, 0x3f, 0x1f};
+ static const u8 mask[] = {0, 0, 0, 0, 0, 0x1, 0xcf, 0x3f, 0x1f};
char buf[10];
u8 brdcfg[16], dutcfg[16];
@@ -689,7 +832,8 @@
sw[5] = ((brdcfg[0] & 0x0f) << 4) | \
((QIXIS_READ(rst_ctl) & 0x30) >> 2) | \
((brdcfg[0] & 0x40) >> 5);
- sw[6] = (brdcfg[11] & 0x20);
+ sw[6] = (brdcfg[11] & 0x20) |
+ ((brdcfg[5] & 0x02) << 3);
sw[7] = (((~QIXIS_READ(rst_ctl)) & 0x40) << 1) | \
((brdcfg[5] & 0x10) << 2);
sw[8] = ((brdcfg[12] & 0x08) << 4) | \
@@ -701,3 +845,23 @@
i + 1, byte_to_binary_mask(sw[i], mask[i], buf), sw[i]);
}
}
+
+static int do_vdd_adjust(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ ulong override;
+
+ if (argc < 2)
+ return CMD_RET_USAGE;
+ if (!strict_strtoul(argv[1], 10, &override))
+ adjust_vdd(override); /* the value is checked by callee */
+ else
+ return CMD_RET_USAGE;
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ vdd_override, 2, 0, do_vdd_adjust,
+ "Override VDD",
+ "- override with the voltage specified in mV, eg. 1050"
+);
diff --git a/board/freescale/t4qds/tlb.c b/board/freescale/t4qds/tlb.c
index 80eb511..92c01cf 100644
--- a/board/freescale/t4qds/tlb.c
+++ b/board/freescale/t4qds/tlb.c
@@ -115,7 +115,7 @@
#ifdef CONFIG_SYS_DCSRBAR_PHYS
SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 13, BOOKE_PAGESZ_4M, 1),
+ 0, 13, BOOKE_PAGESZ_32M, 1),
#endif
#ifdef CONFIG_SYS_NAND_BASE
/*
diff --git a/board/freescale/titanium/Makefile b/board/freescale/titanium/Makefile
new file mode 100644
index 0000000..46827f8
--- /dev/null
+++ b/board/freescale/titanium/Makefile
@@ -0,0 +1,36 @@
+#
+# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
+#
+# (C) Copyright 2011 Freescale Semiconductor, Inc.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := titanium.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/titanium/imximage.cfg b/board/freescale/titanium/imximage.cfg
new file mode 100644
index 0000000..1934343
--- /dev/null
+++ b/board/freescale/titanium/imximage.cfg
@@ -0,0 +1,178 @@
+/*
+ * Projectiondesign AS
+ * Derived from ./board/freescale/mx6qsabrelite/imximage.cfg
+ *
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ * Jason Liu <r64343@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+/* image version */
+
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * sd, nand
+ */
+BOOT_FROM nand
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
+
+#define __ASSEMBLY__
+#include <config.h>
+#include "asm/arch/mx6-ddr.h"
+#include "asm/arch/iomux.h"
+#include "asm/arch/crm_regs.h"
+
+DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000030
+
+DATA 4, MX6_IOM_DRAM_DQM0, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM1, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM2, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM3, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM4, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM5, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM6, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM7, 0x00020030
+
+DATA 4, MX6_IOM_DRAM_CAS, 0x00020030
+DATA 4, MX6_IOM_DRAM_RAS, 0x00020030
+DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00020030
+DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00020030
+
+DATA 4, MX6_IOM_DRAM_RESET, 0x00020030
+DATA 4, MX6_IOM_DRAM_SDCKE0, 0x00003000
+DATA 4, MX6_IOM_DRAM_SDCKE1, 0x00003000
+
+DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000
+
+DATA 4, MX6_IOM_DRAM_SDODT0, 0x00003030
+DATA 4, MX6_IOM_DRAM_SDODT1, 0x00003030
+
+DATA 4, MX6_IOM_GRP_B0DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B1DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B2DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B3DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B4DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B5DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B6DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B7DS, 0x00000030
+DATA 4, MX6_IOM_GRP_ADDDS, 0x00000030
+
+/* (differential input) */
+DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000
+/* disable ddr pullups */
+DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000
+/* (differential input) */
+DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000
+/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
+DATA 4, MX6_IOM_GRP_CTLDS, 0x00000030
+/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
+DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000
+
+/* Read data DQ Byte0-3 delay */
+DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333
+DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333
+DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333
+DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333
+DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333
+DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333
+DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333
+DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333
+
+/*
+ * MDMISC mirroring interleaved (row/bank/col)
+ */
+DATA 4, MX6_MMDC_P0_MDMISC, 0x00081740
+
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000
+DATA 4, MX6_MMDC_P0_MDCFG0, 0x555A7975
+DATA 4, MX6_MMDC_P0_MDCFG1, 0xFF538E64
+DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB
+DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2
+DATA 4, MX6_MMDC_P0_MDOR, 0x005B0E21
+DATA 4, MX6_MMDC_P0_MDOTC, 0x09444040
+DATA 4, MX6_MMDC_P0_MDPDC, 0x00025576
+DATA 4, MX6_MMDC_P0_MDASP, 0x00000017
+DATA 4, MX6_MMDC_P0_MDCTL, 0x83190000
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04088032
+DATA 4, MX6_MMDC_P0_MDSCR, 0x0408803A
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033
+DATA 4, MX6_MMDC_P0_MDSCR, 0x0000803B
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00428031
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00428039
+DATA 4, MX6_MMDC_P0_MDSCR, 0x09408030
+DATA 4, MX6_MMDC_P0_MDSCR, 0x09408038
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008048
+DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1380003
+DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1380003
+DATA 4, MX6_MMDC_P0_MDREF, 0x00005800
+DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227
+DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227
+DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x434B0350
+DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x034C0359
+DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x434B0350
+DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x03650348
+DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x4436383B
+DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x39393341
+DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x35373933
+DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x48254A36
+DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x001F001F
+DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x001F001F
+DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x00440044
+DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x00440044
+DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000
+DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006
+
+/* set the default clock gate to save power */
+DATA 4, CCM_CCGR0, 0x00C03F3F
+DATA 4, CCM_CCGR1, 0x0030FC03
+DATA 4, CCM_CCGR2, 0x0FFFC000
+DATA 4, CCM_CCGR3, 0x3FF00000
+DATA 4, CCM_CCGR4, 0xFFFFF300 /* enable NAND/GPMI/BCH clocks */
+DATA 4, CCM_CCGR5, 0x0F0000C3
+DATA 4, CCM_CCGR6, 0x000003FF
+
+/* enable AXI cache for VDOA/VPU/IPU */
+DATA 4, MX6_IOMUXC_GPR4, 0xF00000CF
+/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
+DATA 4, MX6_IOMUXC_GPR6, 0x007F007F
+DATA 4, MX6_IOMUXC_GPR7, 0x007F007F
diff --git a/board/freescale/titanium/titanium.c b/board/freescale/titanium/titanium.c
new file mode 100644
index 0000000..5250522
--- /dev/null
+++ b/board/freescale/titanium/titanium.c
@@ -0,0 +1,334 @@
+/*
+ * Copyright (C) 2013 Stefan Roese <sr@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/mx6q_pins.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/mxc_i2c.h>
+#include <asm/imx-common/boot_mode.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+#include <micrel.h>
+#include <miiphy.h>
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
+ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+
+#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
+ PAD_CTL_ODE | PAD_CTL_SRE_FAST)
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
+
+ return 0;
+}
+
+iomux_v3_cfg_t const uart1_pads[] = {
+ MX6_PAD_SD3_DAT6__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_SD3_DAT7__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+iomux_v3_cfg_t const uart2_pads[] = {
+ MX6_PAD_EIM_D26__UART2_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_EIM_D27__UART2_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+iomux_v3_cfg_t const uart4_pads[] = {
+ MX6_PAD_CSI0_DAT12__UART4_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_CSI0_DAT13__UART4_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
+
+struct i2c_pads_info i2c_pad_info0 = {
+ .scl = {
+ .i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL | PC,
+ .gpio_mode = MX6_PAD_CSI0_DAT9__GPIO_5_27 | PC,
+ .gp = IMX_GPIO_NR(5, 27)
+ },
+ .sda = {
+ .i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA | PC,
+ .gpio_mode = MX6_PAD_CSI0_DAT8__GPIO_5_26 | PC,
+ .gp = IMX_GPIO_NR(5, 26)
+ }
+};
+
+struct i2c_pads_info i2c_pad_info2 = {
+ .scl = {
+ .i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | PC,
+ .gpio_mode = MX6_PAD_GPIO_3__GPIO_1_3 | PC,
+ .gp = IMX_GPIO_NR(1, 3)
+ },
+ .sda = {
+ .i2c_mode = MX6_PAD_GPIO_16__I2C3_SDA | PC,
+ .gpio_mode = MX6_PAD_GPIO_16__GPIO_7_11 | PC,
+ .gp = IMX_GPIO_NR(7, 11)
+ }
+};
+
+iomux_v3_cfg_t const usdhc3_pads[] = {
+ MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT5__GPIO_7_0 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
+};
+
+iomux_v3_cfg_t const enet_pads1[] = {
+ MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ /* pin 35 - 1 (PHY_AD2) on reset */
+ MX6_PAD_RGMII_RXC__GPIO_6_30 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* pin 32 - 1 - (MODE0) all */
+ MX6_PAD_RGMII_RD0__GPIO_6_25 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* pin 31 - 1 - (MODE1) all */
+ MX6_PAD_RGMII_RD1__GPIO_6_27 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* pin 28 - 1 - (MODE2) all */
+ MX6_PAD_RGMII_RD2__GPIO_6_28 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* pin 27 - 1 - (MODE3) all */
+ MX6_PAD_RGMII_RD3__GPIO_6_29 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* pin 33 - 1 - (CLK125_EN) 125Mhz clockout enabled */
+ MX6_PAD_RGMII_RX_CTL__GPIO_6_24 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* pin 42 PHY nRST */
+ MX6_PAD_EIM_D23__GPIO_3_23 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+iomux_v3_cfg_t const enet_pads2[] = {
+ MX6_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
+};
+
+iomux_v3_cfg_t nfc_pads[] = {
+ MX6_PAD_NANDF_CLE__RAWNAND_CLE | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_NANDF_ALE__RAWNAND_ALE | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_NANDF_WP_B__RAWNAND_RESETN | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_NANDF_RB0__RAWNAND_READY0 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_NANDF_CS0__RAWNAND_CE0N | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_NANDF_CS1__RAWNAND_CE1N | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_NANDF_CS2__RAWNAND_CE2N | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_NANDF_CS3__RAWNAND_CE3N | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_SD4_CMD__RAWNAND_RDN | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_SD4_CLK__RAWNAND_WRN | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_NANDF_D0__RAWNAND_D0 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_NANDF_D1__RAWNAND_D1 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_NANDF_D2__RAWNAND_D2 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_NANDF_D3__RAWNAND_D3 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_NANDF_D4__RAWNAND_D4 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_NANDF_D5__RAWNAND_D5 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_NANDF_D6__RAWNAND_D6 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_NANDF_D7__RAWNAND_D7 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_SD4_DAT0__RAWNAND_DQS | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+static void setup_gpmi_nand(void)
+{
+ struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+ /* config gpmi nand iomux */
+ imx_iomux_v3_setup_multiple_pads(nfc_pads,
+ ARRAY_SIZE(nfc_pads));
+
+ /* config gpmi and bch clock to 100 MHz */
+ clrsetbits_le32(&mxc_ccm->cs2cdr,
+ MXC_CCM_CS2CDR_ENFC_CLK_PODF_MASK |
+ MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK |
+ MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK,
+ MXC_CCM_CS2CDR_ENFC_CLK_PODF(0) |
+ MXC_CCM_CS2CDR_ENFC_CLK_PRED(3) |
+ MXC_CCM_CS2CDR_ENFC_CLK_SEL(3));
+
+ /* enable gpmi and bch clock gating */
+ setbits_le32(&mxc_ccm->CCGR4,
+ MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
+ MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET);
+
+ /* enable apbh clock gating */
+ setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
+}
+
+static void setup_iomux_enet(void)
+{
+ gpio_direction_output(IMX_GPIO_NR(3, 23), 0);
+ gpio_direction_output(IMX_GPIO_NR(6, 30), 1);
+ gpio_direction_output(IMX_GPIO_NR(6, 25), 1);
+ gpio_direction_output(IMX_GPIO_NR(6, 27), 1);
+ gpio_direction_output(IMX_GPIO_NR(6, 28), 1);
+ gpio_direction_output(IMX_GPIO_NR(6, 29), 1);
+ imx_iomux_v3_setup_multiple_pads(enet_pads1, ARRAY_SIZE(enet_pads1));
+ gpio_direction_output(IMX_GPIO_NR(6, 24), 1);
+
+ /* Need delay 10ms according to KSZ9021 spec */
+ udelay(1000 * 10);
+ gpio_set_value(IMX_GPIO_NR(3, 23), 1);
+
+ imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2));
+}
+
+static void setup_iomux_uart(void)
+{
+ imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+ imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
+ imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads));
+}
+
+#ifdef CONFIG_USB_EHCI_MX6
+int board_ehci_hcd_init(int port)
+{
+ return 0;
+}
+
+#endif
+
+#ifdef CONFIG_FSL_ESDHC
+struct fsl_esdhc_cfg usdhc_cfg[1] = {
+ { USDHC3_BASE_ADDR },
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+
+ if (cfg->esdhc_base == USDHC3_BASE_ADDR) {
+ gpio_direction_input(IMX_GPIO_NR(7, 0));
+ return !gpio_get_value(IMX_GPIO_NR(7, 0));
+ }
+
+ return 0;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ /*
+ * Only one USDHC controller on titianium
+ */
+ imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+
+ return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
+}
+#endif
+
+int board_phy_config(struct phy_device *phydev)
+{
+ /* min rx data delay */
+ ksz9021_phy_extended_write(phydev,
+ MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, 0x0);
+ /* min tx data delay */
+ ksz9021_phy_extended_write(phydev,
+ MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, 0x0);
+ /* max rx/tx clock delay, min rx/tx control */
+ ksz9021_phy_extended_write(phydev,
+ MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, 0xf0f0);
+ if (phydev->drv->config)
+ phydev->drv->config(phydev);
+
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ int ret;
+
+ setup_iomux_enet();
+
+ ret = cpu_eth_init(bis);
+ if (ret)
+ printf("FEC MXC: %s:failed\n", __func__);
+
+ return 0;
+}
+
+int board_early_init_f(void)
+{
+ setup_iomux_uart();
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+ setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0);
+ setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
+
+ setup_gpmi_nand();
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ puts("Board: Titanium\n");
+
+ return 0;
+}
+
+#ifdef CONFIG_CMD_BMODE
+static const struct boot_mode board_boot_modes[] = {
+ /* NAND */
+ { "nand", MAKE_CFGVAL(0x80, 0x02, 0x00, 0x00) },
+ /* 4 bit bus width */
+ { "mmc0", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00) },
+ { "mmc1", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00) },
+ { NULL, 0 },
+};
+#endif
+
+int misc_init_r(void)
+{
+#ifdef CONFIG_CMD_BMODE
+ add_board_boot_modes(board_boot_modes);
+#endif
+
+ return 0;
+}
diff --git a/board/cm_t35/Makefile b/board/freescale/vf610twr/Makefile
similarity index 78%
copy from board/cm_t35/Makefile
copy to board/freescale/vf610twr/Makefile
index bde56e6..7416228 100644
--- a/board/cm_t35/Makefile
+++ b/board/freescale/vf610twr/Makefile
@@ -1,9 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
+# Copyright 2013 Freescale Semiconductor, Inc.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
@@ -25,10 +21,7 @@
LIB = $(obj)lib$(BOARD).o
-COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += eeprom.o
-COBJS-$(CONFIG_LCD) += display.o
-
-COBJS := cm_t35.o leds.o $(COBJS-y)
+COBJS := $(BOARD).o
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
@@ -42,3 +35,5 @@
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/vf610twr/imximage.cfg b/board/freescale/vf610twr/imximage.cfg
new file mode 100644
index 0000000..b00d4c1
--- /dev/null
+++ b/board/freescale/vf610twr/imximage.cfg
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+#include <asm/imx-common/imximage.cfg>
+
+/* image version */
+IMAGE_VERSION 2
+
+/* Boot Offset 0x400, valid for both SD and NAND boot */
+BOOT_OFFSET FLASH_OFFSET_STANDARD
diff --git a/board/freescale/vf610twr/vf610twr.c b/board/freescale/vf610twr/vf610twr.c
new file mode 100644
index 0000000..f14df8b
--- /dev/null
+++ b/board/freescale/vf610twr/vf610twr.c
@@ -0,0 +1,407 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux-vf610.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+#include <miiphy.h>
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_25ohm | PAD_CTL_OBE_IBE_ENABLE)
+
+#define ESDHC_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_HIGH | \
+ PAD_CTL_DSE_20ohm | PAD_CTL_OBE_IBE_ENABLE)
+
+#define ENET_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_HIGH | \
+ PAD_CTL_DSE_50ohm | PAD_CTL_OBE_IBE_ENABLE)
+
+void setup_iomux_ddr(void)
+{
+ static const iomux_v3_cfg_t ddr_pads[] = {
+ VF610_PAD_DDR_A15__DDR_A_15,
+ VF610_PAD_DDR_A15__DDR_A_15,
+ VF610_PAD_DDR_A14__DDR_A_14,
+ VF610_PAD_DDR_A13__DDR_A_13,
+ VF610_PAD_DDR_A12__DDR_A_12,
+ VF610_PAD_DDR_A11__DDR_A_11,
+ VF610_PAD_DDR_A10__DDR_A_10,
+ VF610_PAD_DDR_A9__DDR_A_9,
+ VF610_PAD_DDR_A8__DDR_A_8,
+ VF610_PAD_DDR_A7__DDR_A_7,
+ VF610_PAD_DDR_A6__DDR_A_6,
+ VF610_PAD_DDR_A5__DDR_A_5,
+ VF610_PAD_DDR_A4__DDR_A_4,
+ VF610_PAD_DDR_A3__DDR_A_3,
+ VF610_PAD_DDR_A2__DDR_A_2,
+ VF610_PAD_DDR_A1__DDR_A_1,
+ VF610_PAD_DDR_BA2__DDR_BA_2,
+ VF610_PAD_DDR_BA1__DDR_BA_1,
+ VF610_PAD_DDR_BA0__DDR_BA_0,
+ VF610_PAD_DDR_CAS__DDR_CAS_B,
+ VF610_PAD_DDR_CKE__DDR_CKE_0,
+ VF610_PAD_DDR_CLK__DDR_CLK_0,
+ VF610_PAD_DDR_CS__DDR_CS_B_0,
+ VF610_PAD_DDR_D15__DDR_D_15,
+ VF610_PAD_DDR_D14__DDR_D_14,
+ VF610_PAD_DDR_D13__DDR_D_13,
+ VF610_PAD_DDR_D12__DDR_D_12,
+ VF610_PAD_DDR_D11__DDR_D_11,
+ VF610_PAD_DDR_D10__DDR_D_10,
+ VF610_PAD_DDR_D9__DDR_D_9,
+ VF610_PAD_DDR_D8__DDR_D_8,
+ VF610_PAD_DDR_D7__DDR_D_7,
+ VF610_PAD_DDR_D6__DDR_D_6,
+ VF610_PAD_DDR_D5__DDR_D_5,
+ VF610_PAD_DDR_D4__DDR_D_4,
+ VF610_PAD_DDR_D3__DDR_D_3,
+ VF610_PAD_DDR_D2__DDR_D_2,
+ VF610_PAD_DDR_D1__DDR_D_1,
+ VF610_PAD_DDR_D0__DDR_D_0,
+ VF610_PAD_DDR_DQM1__DDR_DQM_1,
+ VF610_PAD_DDR_DQM0__DDR_DQM_0,
+ VF610_PAD_DDR_DQS1__DDR_DQS_1,
+ VF610_PAD_DDR_DQS0__DDR_DQS_0,
+ VF610_PAD_DDR_RAS__DDR_RAS_B,
+ VF610_PAD_DDR_WE__DDR_WE_B,
+ VF610_PAD_DDR_ODT1__DDR_ODT_0,
+ VF610_PAD_DDR_ODT0__DDR_ODT_1,
+ };
+
+ imx_iomux_v3_setup_multiple_pads(ddr_pads, ARRAY_SIZE(ddr_pads));
+}
+
+void ddr_phy_init(void)
+{
+ struct ddrmr_regs *ddrmr = (struct ddrmr_regs *)DDR_BASE_ADDR;
+
+ writel(DDRMC_PHY_DQ_TIMING, &ddrmr->phy[0]);
+ writel(DDRMC_PHY_DQ_TIMING, &ddrmr->phy[16]);
+ writel(DDRMC_PHY_DQ_TIMING, &ddrmr->phy[32]);
+ writel(DDRMC_PHY_DQ_TIMING, &ddrmr->phy[48]);
+
+ writel(DDRMC_PHY_DQS_TIMING, &ddrmr->phy[1]);
+ writel(DDRMC_PHY_DQS_TIMING, &ddrmr->phy[17]);
+ writel(DDRMC_PHY_DQS_TIMING, &ddrmr->phy[33]);
+ writel(DDRMC_PHY_DQS_TIMING, &ddrmr->phy[49]);
+
+ writel(DDRMC_PHY_CTRL, &ddrmr->phy[2]);
+ writel(DDRMC_PHY_CTRL, &ddrmr->phy[18]);
+ writel(DDRMC_PHY_CTRL, &ddrmr->phy[34]);
+ writel(DDRMC_PHY_CTRL, &ddrmr->phy[50]);
+
+ writel(DDRMC_PHY_MASTER_CTRL, &ddrmr->phy[3]);
+ writel(DDRMC_PHY_MASTER_CTRL, &ddrmr->phy[19]);
+ writel(DDRMC_PHY_MASTER_CTRL, &ddrmr->phy[35]);
+ writel(DDRMC_PHY_MASTER_CTRL, &ddrmr->phy[51]);
+
+ writel(DDRMC_PHY_SLAVE_CTRL, &ddrmr->phy[4]);
+ writel(DDRMC_PHY_SLAVE_CTRL, &ddrmr->phy[20]);
+ writel(DDRMC_PHY_SLAVE_CTRL, &ddrmr->phy[36]);
+ writel(DDRMC_PHY_SLAVE_CTRL, &ddrmr->phy[52]);
+
+ writel(DDRMC_PHY50_DDR3_MODE | DDRMC_PHY50_EN_SW_HALF_CYCLE,
+ &ddrmr->phy[50]);
+}
+
+void ddr_ctrl_init(void)
+{
+ struct ddrmr_regs *ddrmr = (struct ddrmr_regs *)DDR_BASE_ADDR;
+
+ writel(DDRMC_CR00_DRAM_CLASS_DDR3, &ddrmr->cr[0]);
+ writel(DDRMC_CR02_DRAM_TINIT(32), &ddrmr->cr[2]);
+ writel(DDRMC_CR10_TRST_PWRON(124), &ddrmr->cr[10]);
+
+ writel(DDRMC_CR11_CKE_INACTIVE(80000), &ddrmr->cr[11]);
+ writel(DDRMC_CR12_WRLAT(5) | DDRMC_CR12_CASLAT_LIN(12), &ddrmr->cr[12]);
+ writel(DDRMC_CR13_TRC(21) | DDRMC_CR13_TRRD(4) | DDRMC_CR13_TCCD(4) |
+ DDRMC_CR13_TBST_INT_INTERVAL(4), &ddrmr->cr[13]);
+ writel(DDRMC_CR14_TFAW(20) | DDRMC_CR14_TRP(6) | DDRMC_CR14_TWTR(4) |
+ DDRMC_CR14_TRAS_MIN(15), &ddrmr->cr[14]);
+ writel(DDRMC_CR16_TMRD(4) | DDRMC_CR16_TRTP(4), &ddrmr->cr[16]);
+ writel(DDRMC_CR17_TRAS_MAX(28080) | DDRMC_CR17_TMOD(12),
+ &ddrmr->cr[17]);
+ writel(DDRMC_CR18_TCKESR(4) | DDRMC_CR18_TCKE(3), &ddrmr->cr[18]);
+
+ writel(DDRMC_CR20_AP_EN, &ddrmr->cr[20]);
+ writel(DDRMC_CR21_TRCD_INT(6) | DDRMC_CR21_TRAS_LOCKOUT |
+ DDRMC_CR21_CCMAP_EN, &ddrmr->cr[21]);
+
+ writel(DDRMC_CR22_TDAL(11), &ddrmr->cr[22]);
+ writel(DDRMC_CR23_BSTLEN(3) | DDRMC_CR23_TDLL(512), &ddrmr->cr[23]);
+ writel(DDRMC_CR24_TRP_AB(6), &ddrmr->cr[24]);
+
+ writel(DDRMC_CR25_TREF_EN, &ddrmr->cr[25]);
+ writel(DDRMC_CR26_TREF(3112) | DDRMC_CR26_TRFC(44), &ddrmr->cr[26]);
+ writel(DDRMC_CR28_TREF_INT(5), &ddrmr->cr[28]);
+ writel(DDRMC_CR29_TPDEX(3), &ddrmr->cr[29]);
+
+ writel(DDRMC_CR30_TXPDLL(10), &ddrmr->cr[30]);
+ writel(DDRMC_CR31_TXSNR(68) | DDRMC_CR31_TXSR(512), &ddrmr->cr[31]);
+ writel(DDRMC_CR33_EN_QK_SREF, &ddrmr->cr[33]);
+ writel(DDRMC_CR34_CKSRX(5) | DDRMC_CR34_CKSRE(5), &ddrmr->cr[34]);
+
+ writel(DDRMC_CR38_FREQ_CHG_EN, &ddrmr->cr[38]);
+ writel(DDRMC_CR39_PHY_INI_COM(1024) | DDRMC_CR39_PHY_INI_STA(16) |
+ DDRMC_CR39_FRQ_CH_DLLOFF(2), &ddrmr->cr[39]);
+
+ writel(DDRMC_CR41_PHY_INI_STRT_INI_DIS, &ddrmr->cr[41]);
+ writel(DDRMC_CR48_MR1_DA_0(70) | DDRMC_CR48_MR0_DA_0(1056),
+ &ddrmr->cr[48]);
+
+ writel(DDRMC_CR66_ZQCL(256) | DDRMC_CR66_ZQINIT(512), &ddrmr->cr[66]);
+ writel(DDRMC_CR67_ZQCS(64), &ddrmr->cr[67]);
+ writel(DDRMC_CR69_ZQ_ON_SREF_EX(2), &ddrmr->cr[69]);
+
+ writel(DDRMC_CR70_REF_PER_ZQ(64), &ddrmr->cr[70]);
+ writel(DDRMC_CR72_ZQCS_ROTATE, &ddrmr->cr[72]);
+
+ writel(DDRMC_CR73_APREBIT(10) | DDRMC_CR73_COL_DIFF(1) |
+ DDRMC_CR73_ROW_DIFF(3), &ddrmr->cr[73]);
+ writel(DDRMC_CR74_BANKSPLT_EN | DDRMC_CR74_ADDR_CMP_EN |
+ DDRMC_CR74_CMD_AGE_CNT(255) | DDRMC_CR74_AGE_CNT(255),
+ &ddrmr->cr[74]);
+ writel(DDRMC_CR75_RW_PG_EN | DDRMC_CR75_RW_EN | DDRMC_CR75_PRI_EN |
+ DDRMC_CR75_PLEN, &ddrmr->cr[75]);
+ writel(DDRMC_CR76_NQENT_ACTDIS(3) | DDRMC_CR76_D_RW_G_BKCN(3) |
+ DDRMC_CR76_W2R_SPLT_EN | DDRMC_CR76_CS_EN, &ddrmr->cr[76]);
+ writel(DDRMC_CR77_CS_MAP | DDRMC_CR77_DI_RD_INTLEAVE |
+ DDRMC_CR77_SWAP_EN, &ddrmr->cr[77]);
+ writel(DDRMC_CR78_BUR_ON_FLY_BIT(12), &ddrmr->cr[78]);
+ writel(DDRMC_CR79_CTLUPD_AREF, &ddrmr->cr[79]);
+
+ writel(DDRMC_CR82_INT_MASK, &ddrmr->cr[82]);
+
+ writel(DDRMC_CR87_ODT_WR_MAPCS0 | DDRMC_CR87_ODT_RD_MAPCS0,
+ &ddrmr->cr[87]);
+ writel(DDRMC_CR88_TODTL_CMD(4), &ddrmr->cr[88]);
+ writel(DDRMC_CR89_AODT_RWSMCS(2), &ddrmr->cr[89]);
+
+ writel(DDRMC_CR91_R2W_SMCSDL(2), &ddrmr->cr[91]);
+ writel(DDRMC_CR96_WLMRD(40) | DDRMC_CR96_WLDQSEN(25), &ddrmr->cr[96]);
+
+ writel(DDRMC_CR105_RDLVL_DL_0(32), &ddrmr->cr[105]);
+ writel(DDRMC_CR110_RDLVL_DL_1(32), &ddrmr->cr[110]);
+ writel(DDRMC_CR114_RDLVL_GTDL_2(8224), &ddrmr->cr[114]);
+
+ writel(DDRMC_CR117_AXI0_W_PRI(1) | DDRMC_CR117_AXI0_R_PRI(1),
+ &ddrmr->cr[117]);
+ writel(DDRMC_CR118_AXI1_W_PRI(1) | DDRMC_CR118_AXI1_R_PRI(1),
+ &ddrmr->cr[118]);
+
+ writel(DDRMC_CR120_AXI0_PRI1_RPRI(2) | DDRMC_CR120_AXI0_PRI0_RPRI(2),
+ &ddrmr->cr[120]);
+ writel(DDRMC_CR121_AXI0_PRI3_RPRI(2) | DDRMC_CR121_AXI0_PRI2_RPRI(2),
+ &ddrmr->cr[121]);
+ writel(DDRMC_CR122_AXI1_PRI1_RPRI(1) | DDRMC_CR122_AXI1_PRI0_RPRI(1) |
+ DDRMC_CR122_AXI0_PRIRLX(100), &ddrmr->cr[122]);
+ writel(DDRMC_CR123_AXI1_PRI3_RPRI(1) | DDRMC_CR123_AXI1_PRI2_RPRI(1),
+ &ddrmr->cr[123]);
+ writel(DDRMC_CR124_AXI1_PRIRLX(100), &ddrmr->cr[124]);
+
+ writel(DDRMC_CR126_PHY_RDLAT(11), &ddrmr->cr[126]);
+ writel(DDRMC_CR132_WRLAT_ADJ(5) | DDRMC_CR132_RDLAT_ADJ(6),
+ &ddrmr->cr[132]);
+ writel(DDRMC_CR139_PHY_WRLV_RESPLAT(4) | DDRMC_CR139_PHY_WRLV_LOAD(7) |
+ DDRMC_CR139_PHY_WRLV_DLL(3) | DDRMC_CR139_PHY_WRLV_EN(3),
+ &ddrmr->cr[139]);
+
+ writel(DDRMC_CR154_PAD_ZQ_EARLY_CMP_EN_TIMER(13) |
+ DDRMC_CR154_PAD_ZQ_MODE(1), &ddrmr->cr[154]);
+ writel(DDRMC_CR155_AXI0_AWCACHE | DDRMC_CR155_PAD_ODT_BYTE1(2),
+ &ddrmr->cr[155]);
+ writel(DDRMC_CR158_TWR(6), &ddrmr->cr[158]);
+
+ ddr_phy_init();
+
+ writel(DDRMC_CR00_DRAM_CLASS_DDR3 | DDRMC_CR00_START, &ddrmr->cr[0]);
+
+ udelay(200);
+}
+
+int dram_init(void)
+{
+ setup_iomux_ddr();
+
+ ddr_ctrl_init();
+ gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
+
+ return 0;
+}
+
+static void setup_iomux_uart(void)
+{
+ static const iomux_v3_cfg_t uart1_pads[] = {
+ NEW_PAD_CTRL(VF610_PAD_PTB4__UART1_TX, UART_PAD_CTRL),
+ NEW_PAD_CTRL(VF610_PAD_PTB5__UART1_RX, UART_PAD_CTRL),
+ };
+
+ imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+}
+
+static void setup_iomux_enet(void)
+{
+ static const iomux_v3_cfg_t enet0_pads[] = {
+ NEW_PAD_CTRL(VF610_PAD_PTA6__RMII0_CLKIN, ENET_PAD_CTRL),
+ NEW_PAD_CTRL(VF610_PAD_PTC1__RMII0_MDIO, ENET_PAD_CTRL),
+ NEW_PAD_CTRL(VF610_PAD_PTC0__RMII0_MDC, ENET_PAD_CTRL),
+ NEW_PAD_CTRL(VF610_PAD_PTC2__RMII0_CRS_DV, ENET_PAD_CTRL),
+ NEW_PAD_CTRL(VF610_PAD_PTC3__RMII0_RD1, ENET_PAD_CTRL),
+ NEW_PAD_CTRL(VF610_PAD_PTC4__RMII0_RD0, ENET_PAD_CTRL),
+ NEW_PAD_CTRL(VF610_PAD_PTC5__RMII0_RXER, ENET_PAD_CTRL),
+ NEW_PAD_CTRL(VF610_PAD_PTC6__RMII0_TD1, ENET_PAD_CTRL),
+ NEW_PAD_CTRL(VF610_PAD_PTC7__RMII0_TD0, ENET_PAD_CTRL),
+ NEW_PAD_CTRL(VF610_PAD_PTC8__RMII0_TXEN, ENET_PAD_CTRL),
+ };
+
+ imx_iomux_v3_setup_multiple_pads(enet0_pads, ARRAY_SIZE(enet0_pads));
+}
+
+#ifdef CONFIG_FSL_ESDHC
+struct fsl_esdhc_cfg esdhc_cfg[1] = {
+ {ESDHC1_BASE_ADDR},
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ /* eSDHC1 is always present */
+ return 1;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ static const iomux_v3_cfg_t esdhc1_pads[] = {
+ NEW_PAD_CTRL(VF610_PAD_PTA24__ESDHC1_CLK, ESDHC_PAD_CTRL),
+ NEW_PAD_CTRL(VF610_PAD_PTA25__ESDHC1_CMD, ESDHC_PAD_CTRL),
+ NEW_PAD_CTRL(VF610_PAD_PTA26__ESDHC1_DAT0, ESDHC_PAD_CTRL),
+ NEW_PAD_CTRL(VF610_PAD_PTA27__ESDHC1_DAT1, ESDHC_PAD_CTRL),
+ NEW_PAD_CTRL(VF610_PAD_PTA28__ESDHC1_DAT2, ESDHC_PAD_CTRL),
+ NEW_PAD_CTRL(VF610_PAD_PTA29__ESDHC1_DAT3, ESDHC_PAD_CTRL),
+ };
+
+ esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+
+ imx_iomux_v3_setup_multiple_pads(
+ esdhc1_pads, ARRAY_SIZE(esdhc1_pads));
+
+ return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
+}
+#endif
+
+static void clock_init(void)
+{
+ struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
+ struct anadig_reg *anadig = (struct anadig_reg *)ANADIG_BASE_ADDR;
+
+ clrsetbits_le32(&ccm->ccgr0, CCM_REG_CTRL_MASK,
+ CCM_CCGR0_UART1_CTRL_MASK);
+ clrsetbits_le32(&ccm->ccgr1, CCM_REG_CTRL_MASK,
+ CCM_CCGR1_PIT_CTRL_MASK | CCM_CCGR1_WDOGA5_CTRL_MASK);
+ clrsetbits_le32(&ccm->ccgr2, CCM_REG_CTRL_MASK,
+ CCM_CCGR2_IOMUXC_CTRL_MASK | CCM_CCGR2_PORTA_CTRL_MASK |
+ CCM_CCGR2_PORTB_CTRL_MASK | CCM_CCGR2_PORTC_CTRL_MASK |
+ CCM_CCGR2_PORTD_CTRL_MASK | CCM_CCGR2_PORTE_CTRL_MASK);
+ clrsetbits_le32(&ccm->ccgr3, CCM_REG_CTRL_MASK,
+ CCM_CCGR3_ANADIG_CTRL_MASK);
+ clrsetbits_le32(&ccm->ccgr4, CCM_REG_CTRL_MASK,
+ CCM_CCGR4_WKUP_CTRL_MASK | CCM_CCGR4_CCM_CTRL_MASK |
+ CCM_CCGR4_GPC_CTRL_MASK);
+ clrsetbits_le32(&ccm->ccgr6, CCM_REG_CTRL_MASK,
+ CCM_CCGR6_OCOTP_CTRL_MASK | CCM_CCGR6_DDRMC_CTRL_MASK);
+ clrsetbits_le32(&ccm->ccgr7, CCM_REG_CTRL_MASK,
+ CCM_CCGR7_SDHC1_CTRL_MASK);
+ clrsetbits_le32(&ccm->ccgr9, CCM_REG_CTRL_MASK,
+ CCM_CCGR9_FEC0_CTRL_MASK | CCM_CCGR9_FEC1_CTRL_MASK);
+
+ clrsetbits_le32(&anadig->pll2_ctrl, ANADIG_PLL2_CTRL_POWERDOWN,
+ ANADIG_PLL2_CTRL_ENABLE | ANADIG_PLL2_CTRL_DIV_SELECT);
+ clrsetbits_le32(&anadig->pll1_ctrl, ANADIG_PLL1_CTRL_POWERDOWN,
+ ANADIG_PLL1_CTRL_ENABLE | ANADIG_PLL1_CTRL_DIV_SELECT);
+
+ clrsetbits_le32(&ccm->ccr, CCM_CCR_OSCNT_MASK,
+ CCM_CCR_FIRC_EN | CCM_CCR_OSCNT(5));
+ clrsetbits_le32(&ccm->ccsr, CCM_REG_CTRL_MASK,
+ CCM_CCSR_PLL1_PFD_CLK_SEL(3) | CCM_CCSR_PLL2_PFD4_EN |
+ CCM_CCSR_PLL2_PFD3_EN | CCM_CCSR_PLL2_PFD2_EN |
+ CCM_CCSR_PLL2_PFD1_EN | CCM_CCSR_PLL1_PFD4_EN |
+ CCM_CCSR_PLL1_PFD3_EN | CCM_CCSR_PLL1_PFD2_EN |
+ CCM_CCSR_PLL1_PFD1_EN | CCM_CCSR_DDRC_CLK_SEL(1) |
+ CCM_CCSR_FAST_CLK_SEL(1) | CCM_CCSR_SYS_CLK_SEL(4));
+ clrsetbits_le32(&ccm->cacrr, CCM_REG_CTRL_MASK,
+ CCM_CACRR_IPG_CLK_DIV(1) | CCM_CACRR_BUS_CLK_DIV(2) |
+ CCM_CACRR_ARM_CLK_DIV(0));
+ clrsetbits_le32(&ccm->cscmr1, CCM_REG_CTRL_MASK,
+ CCM_CSCMR1_ESDHC1_CLK_SEL(3));
+ clrsetbits_le32(&ccm->cscdr1, CCM_REG_CTRL_MASK,
+ CCM_CSCDR1_RMII_CLK_EN);
+ clrsetbits_le32(&ccm->cscdr2, CCM_REG_CTRL_MASK,
+ CCM_CSCDR2_ESDHC1_EN | CCM_CSCDR2_ESDHC1_CLK_DIV(0));
+ clrsetbits_le32(&ccm->cscmr2, CCM_REG_CTRL_MASK,
+ CCM_CSCMR2_RMII_CLK_SEL(0));
+}
+
+static void mscm_init(void)
+{
+ struct mscm_ir *mscmir = (struct mscm_ir *)MSCM_IR_BASE_ADDR;
+ int i;
+
+ for (i = 0; i < MSCM_IRSPRC_NUM; i++)
+ writew(MSCM_IRSPRC_CP0_EN, &mscmir->irsprc[i]);
+}
+
+int board_phy_config(struct phy_device *phydev)
+{
+ if (phydev->drv->config)
+ phydev->drv->config(phydev);
+
+ return 0;
+}
+
+int board_early_init_f(void)
+{
+ clock_init();
+ mscm_init();
+
+ setup_iomux_uart();
+ setup_iomux_enet();
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ puts("Board: vf610twr\n");
+
+ return 0;
+}
diff --git a/board/genesi/mx51_efikamx/efikamx-usb.c b/board/genesi/mx51_efikamx/efikamx-usb.c
index cf020c3..cabad70 100644
--- a/board/genesi/mx51_efikamx/efikamx-usb.c
+++ b/board/genesi/mx51_efikamx/efikamx-usb.c
@@ -26,8 +26,7 @@
#include <usb.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
-#include <asm/arch/mx5x_pins.h>
-#include <asm/arch/iomux.h>
+#include <asm/arch/iomux-mx51.h>
#include <asm/gpio.h>
#include <usb/ehci-fsl.h>
#include <usb/ulpi.h>
@@ -35,40 +34,57 @@
#include "../../../drivers/usb/host/ehci.h"
-/* USB pin configuration */
-#define USB_PAD_CONFIG (PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST | \
- PAD_CTL_DRV_HIGH | PAD_CTL_100K_PU | \
- PAD_CTL_HYS_ENABLE | PAD_CTL_PUE_PULL)
-
/*
* Configure the USB H1 and USB H2 IOMUX
*/
void setup_iomux_usb(void)
{
- setup_iomux_usb_h1();
+ static const iomux_v3_cfg_t usb_h1_pads[] = {
+ MX51_PAD_USBH1_CLK__USBH1_CLK,
+ MX51_PAD_USBH1_DIR__USBH1_DIR,
+ MX51_PAD_USBH1_STP__USBH1_STP,
+ MX51_PAD_USBH1_NXT__USBH1_NXT,
+ MX51_PAD_USBH1_DATA0__USBH1_DATA0,
+ MX51_PAD_USBH1_DATA1__USBH1_DATA1,
+ MX51_PAD_USBH1_DATA2__USBH1_DATA2,
+ MX51_PAD_USBH1_DATA3__USBH1_DATA3,
+ MX51_PAD_USBH1_DATA4__USBH1_DATA4,
+ MX51_PAD_USBH1_DATA5__USBH1_DATA5,
+ MX51_PAD_USBH1_DATA6__USBH1_DATA6,
+ MX51_PAD_USBH1_DATA7__USBH1_DATA7,
+ };
- if (machine_is_efikasb())
- setup_iomux_usb_h2();
+ static const iomux_v3_cfg_t usb_pads[] = {
+ MX51_PAD_EIM_D27__GPIO2_9, /* USB PHY reset */
+ MX51_PAD_GPIO1_5__GPIO1_5, /* USB HUB reset */
+ NEW_PAD_CTRL(MX51_PAD_EIM_A22__GPIO2_16, 0), /* WIFI /EN */
+ NEW_PAD_CTRL(MX51_PAD_EIM_A16__GPIO2_10, 0), /* WIFI RESET */
+ NEW_PAD_CTRL(MX51_PAD_EIM_A17__GPIO2_11, 0), /* BT /EN */
+ };
- /* USB PHY reset */
- mxc_request_iomux(MX51_PIN_EIM_D27, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_EIM_D27, PAD_CTL_PKE_ENABLE |
- PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH);
+ imx_iomux_v3_setup_multiple_pads(usb_h1_pads, ARRAY_SIZE(usb_h1_pads));
- /* USB HUB reset */
- mxc_request_iomux(MX51_PIN_GPIO1_5, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_GPIO1_5, PAD_CTL_PKE_ENABLE |
- PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH);
+ if (machine_is_efikasb()) {
+ static const iomux_v3_cfg_t usb_h2_pads[] = {
+ MX51_PAD_EIM_A24__USBH2_CLK,
+ MX51_PAD_EIM_A25__USBH2_DIR,
+ MX51_PAD_EIM_A26__USBH2_STP,
+ MX51_PAD_EIM_A27__USBH2_NXT,
+ MX51_PAD_EIM_D16__USBH2_DATA0,
+ MX51_PAD_EIM_D17__USBH2_DATA1,
+ MX51_PAD_EIM_D18__USBH2_DATA2,
+ MX51_PAD_EIM_D19__USBH2_DATA3,
+ MX51_PAD_EIM_D20__USBH2_DATA4,
+ MX51_PAD_EIM_D21__USBH2_DATA5,
+ MX51_PAD_EIM_D22__USBH2_DATA6,
+ MX51_PAD_EIM_D23__USBH2_DATA7,
+ };
- /* WIFI EN (act low) */
- mxc_request_iomux(MX51_PIN_EIM_A22, IOMUX_CONFIG_GPIO);
- mxc_iomux_set_pad(MX51_PIN_EIM_A22, 0);
- /* WIFI RESET */
- mxc_request_iomux(MX51_PIN_EIM_A16, IOMUX_CONFIG_GPIO);
- mxc_iomux_set_pad(MX51_PIN_EIM_A16, 0);
- /* BT EN (act low) */
- mxc_request_iomux(MX51_PIN_EIM_A17, IOMUX_CONFIG_GPIO);
- mxc_iomux_set_pad(MX51_PIN_EIM_A17, 0);
+ imx_iomux_v3_setup_multiple_pads(usb_h2_pads,
+ ARRAY_SIZE(usb_h2_pads));
+ }
+
+ imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads));
}
/*
@@ -77,18 +93,18 @@
static void efika_usb_enable_devices(void)
{
/* Enable Bluetooth */
- gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_A17), 0);
+ gpio_direction_output(IMX_GPIO_NR(2, 11), 0);
udelay(10000);
- gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_A17), 1);
+ gpio_set_value(IMX_GPIO_NR(2, 11), 1);
/* Enable WiFi */
- gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_A22), 1);
+ gpio_direction_output(IMX_GPIO_NR(2, 16), 1);
udelay(10000);
/* Reset the WiFi chip */
- gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_A16), 0);
+ gpio_direction_output(IMX_GPIO_NR(2, 10), 0);
udelay(10000);
- gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_A16), 1);
+ gpio_set_value(IMX_GPIO_NR(2, 10), 1);
}
/*
@@ -97,11 +113,11 @@
static void efika_usb_hub_reset(void)
{
/* HUB reset */
- gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_GPIO1_5), 1);
+ gpio_direction_output(IMX_GPIO_NR(1, 5), 1);
udelay(1000);
- gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_5), 0);
+ gpio_set_value(IMX_GPIO_NR(1, 5), 0);
udelay(1000);
- gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_5), 1);
+ gpio_set_value(IMX_GPIO_NR(1, 5), 1);
}
/*
@@ -110,28 +126,26 @@
static void efika_usb_phy_reset(void)
{
/* SMSC 3317 PHY reset */
- gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_D27), 0);
+ gpio_direction_output(IMX_GPIO_NR(2, 9), 0);
udelay(1000);
- gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_D27), 1);
+ gpio_set_value(IMX_GPIO_NR(2, 9), 1);
}
static void efika_ehci_init(struct usb_ehci *ehci, uint32_t stp_gpio,
- uint32_t alt0, uint32_t alt1)
+ iomux_v3_cfg_t stp_pad_gpio,
+ iomux_v3_cfg_t stp_pad_usb)
{
int ret;
struct ulpi_regs *ulpi = (struct ulpi_regs *)0;
struct ulpi_viewport ulpi_vp;
- mxc_request_iomux(stp_gpio, alt0);
- mxc_iomux_set_pad(stp_gpio, PAD_CTL_DRV_HIGH |
- PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
- gpio_direction_output(IOMUX_TO_GPIO(stp_gpio), 0);
+ imx_iomux_v3_setup_pad(stp_pad_gpio);
+ gpio_direction_output(stp_gpio, 0);
udelay(1000);
- gpio_set_value(IOMUX_TO_GPIO(stp_gpio), 1);
+ gpio_set_value(stp_gpio, 1);
udelay(1000);
- mxc_request_iomux(stp_gpio, alt1);
- mxc_iomux_set_pad(stp_gpio, USB_PAD_CONFIG);
+ imx_iomux_v3_setup_pad(stp_pad_usb);
udelay(10000);
ulpi_vp.viewport_addr = (u32)&ehci->ulpi_viewpoint;
@@ -204,11 +218,13 @@
tmp = (tmp & ~0x3) | 0x01;
writel(tmp, OTG_BASE_ADDR + 0x80c);
} else if (port == 1) {
- efika_ehci_init(ehci, MX51_PIN_USBH1_STP,
- IOMUX_CONFIG_ALT2, IOMUX_CONFIG_ALT0);
+ efika_ehci_init(ehci, IMX_GPIO_NR(1, 27),
+ MX51_PAD_USBH1_STP__GPIO1_27,
+ MX51_PAD_USBH1_STP__USBH1_STP);
} else if ((port == 2) && machine_is_efikasb()) {
- efika_ehci_init(ehci, MX51_PIN_EIM_A26,
- IOMUX_CONFIG_ALT1, IOMUX_CONFIG_ALT2);
+ efika_ehci_init(ehci, IMX_GPIO_NR(2, 20),
+ MX51_PAD_EIM_A26__GPIO2_20,
+ MX51_PAD_EIM_A26__USBH2_STP);
}
if (port)
diff --git a/board/genesi/mx51_efikamx/efikamx.c b/board/genesi/mx51_efikamx/efikamx.c
index 69d41db..13582a2 100644
--- a/board/genesi/mx51_efikamx/efikamx.c
+++ b/board/genesi/mx51_efikamx/efikamx.c
@@ -293,7 +293,7 @@
static iomux_v3_cfg_t const efikamx_sdhc1_cd_pads[] = {
MX51_PAD_GPIO1_0__SD1_CD,
- MX51_PAD_EIM_CS2__SD1_CD,
+ NEW_PAD_CTRL(MX51_PAD_EIM_CS2__GPIO2_27, MX51_ESDHC_PAD_CTRL),
};
#define EFIKAMX_SDHC1_CD IMX_GPIO_NR(1, 0)
diff --git a/board/h2200/h2200.c b/board/h2200/h2200.c
index 720b06e..738e480 100644
--- a/board/h2200/h2200.c
+++ b/board/h2200/h2200.c
@@ -32,6 +32,15 @@
return 0;
}
+void reset_cpu(ulong ignore)
+{
+ /* Enable VLIO interface on Hamcop */
+ writeb(0x1, 0x4000);
+
+ /* Reset board (cold reset) */
+ writeb(0xff, 0x4002);
+}
+
int board_init(void)
{
/* We have RAM, disable cache */
diff --git a/board/htkw/mcx/mcx.c b/board/htkw/mcx/mcx.c
index 923461a..7f0330d 100644
--- a/board/htkw/mcx/mcx.c
+++ b/board/htkw/mcx/mcx.c
@@ -28,7 +28,7 @@
#include <asm/gpio.h>
#include <asm/omap_gpio.h>
#include <asm/arch/dss.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
#include "errno.h"
#include <i2c.h>
#ifdef CONFIG_USB_EHCI
diff --git a/board/cm_t35/Makefile b/board/icpdas/lp8x4x/Makefile
similarity index 78%
copy from board/cm_t35/Makefile
copy to board/icpdas/lp8x4x/Makefile
index bde56e6..cbe6aa9 100644
--- a/board/cm_t35/Makefile
+++ b/board/icpdas/lp8x4x/Makefile
@@ -1,9 +1,7 @@
#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# ICPDAS LP-8x4x Support
#
-# See file CREDITS for list of people who contributed to this
-# project.
+# Copyright (C) 2013 Sergey Yanovich <ynvich@gmail.com>
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
@@ -25,10 +23,7 @@
LIB = $(obj)lib$(BOARD).o
-COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += eeprom.o
-COBJS-$(CONFIG_LCD) += display.o
-
-COBJS := cm_t35.o leds.o $(COBJS-y)
+COBJS := lp8x4x.o
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
@@ -42,3 +37,5 @@
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/icpdas/lp8x4x/lp8x4x.c b/board/icpdas/lp8x4x/lp8x4x.c
new file mode 100644
index 0000000..76f0700
--- /dev/null
+++ b/board/icpdas/lp8x4x/lp8x4x.c
@@ -0,0 +1,147 @@
+/*
+ * ICP DAS LP-8x4x Support
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ * adapted from Voipac PXA270 Support by
+ * Copyright (C) 2013 Sergey Yanovich <ynvich@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/regs-mmc.h>
+#include <asm/arch/pxa.h>
+#include <netdev.h>
+#include <serial.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+int board_init(void)
+{
+ /* We have RAM, disable cache */
+ dcache_disable();
+ icache_disable();
+
+ /* memory and cpu-speed are setup before relocation */
+ /* so we do _nothing_ here */
+
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = 0xa0000100;
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ pxa2xx_dram_init();
+ gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
+ return 0;
+}
+
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+}
+
+#ifdef CONFIG_CMD_MMC
+int board_mmc_init(bd_t *bis)
+{
+ pxa_mmc_register(0);
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_CMD_USB
+int usb_board_init(void)
+{
+ writel((UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
+ ~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE),
+ UHCHR);
+
+ writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR);
+
+ while (readl(UHCHR) & UHCHR_FSBIR)
+ continue; /* required by checkpath.pl */
+
+ writel(readl(UHCHR) & ~UHCHR_SSE, UHCHR);
+ writel((UHCHIE_UPRIE | UHCHIE_RWIE), UHCHIE);
+
+ /* Clear any OTG Pin Hold */
+ if (readl(PSSR) & PSSR_OTGPH)
+ writel(readl(PSSR) | PSSR_OTGPH, PSSR);
+
+ writel(readl(UHCRHDA) & ~(0x200), UHCRHDA);
+ writel(readl(UHCRHDA) | 0x100, UHCRHDA);
+
+ /* Set port power control mask bits, only 3 ports. */
+ writel(readl(UHCRHDB) | (0x7<<17), UHCRHDB);
+
+ /* enable port 2 */
+ writel(readl(UP2OCR) | UP2OCR_HXOE | UP2OCR_HXS |
+ UP2OCR_DMPDE | UP2OCR_DPPDE, UP2OCR);
+
+ return 0;
+}
+
+void usb_board_init_fail(void)
+{
+ return;
+}
+
+void usb_board_stop(void)
+{
+ writel(readl(UHCHR) | UHCHR_FHR, UHCHR);
+ udelay(11);
+ writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR);
+
+ writel(readl(UHCCOMS) | 1, UHCCOMS);
+ udelay(10);
+
+ writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN);
+
+ return;
+}
+#endif
+
+#ifdef CONFIG_DRIVER_DM9000
+void lp8x4x_eth1_mac_init(void)
+{
+ u8 eth1addr[8];
+ int i;
+ u8 reg;
+
+ eth_getenv_enetaddr_by_index("eth", 1, eth1addr);
+ if (!is_valid_ether_addr(eth1addr))
+ return;
+
+ for (i = 0, reg = 0x10; i < 6; i++, reg++) {
+ writeb(reg, (u8 *)(DM9000_IO_2));
+ writeb(eth1addr[i], (u8 *)(DM9000_DATA_2));
+ }
+}
+
+int board_eth_init(bd_t *bis)
+{
+ lp8x4x_eth1_mac_init();
+ return dm9000_initialize(bis);
+}
+#endif
diff --git a/board/isee/igep0033/Makefile b/board/isee/igep0033/Makefile
new file mode 100644
index 0000000..54a4b75
--- /dev/null
+++ b/board/isee/igep0033/Makefile
@@ -0,0 +1,46 @@
+#
+# Makefile
+#
+# Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed "as is" WITHOUT ANY WARRANTY of any
+# kind, whether express or implied; without even the implied warranty
+# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+ifdef CONFIG_SPL_BUILD
+COBJS := mux.o
+endif
+
+COBJS += board.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/isee/igep0033/board.c b/board/isee/igep0033/board.c
new file mode 100644
index 0000000..826cead
--- /dev/null
+++ b/board/isee/igep0033/board.c
@@ -0,0 +1,241 @@
+/*
+ * Board functions for IGEP COM AQUILA/CYGNUS based boards
+ *
+ * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <spl.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+#include <asm/emif.h>
+#include <asm/gpio.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <cpsw.h>
+#include "board.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
+#ifdef CONFIG_SPL_BUILD
+static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
+#endif
+
+/* MII mode defines */
+#define RMII_MODE_ENABLE 0x4D
+
+static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+/* UART Defines */
+#ifdef CONFIG_SPL_BUILD
+#define UART_RESET (0x1 << 1)
+#define UART_CLK_RUNNING_MASK 0x1
+#define UART_SMART_IDLE_EN (0x1 << 0x3)
+
+static void rtc32k_enable(void)
+{
+ struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
+
+ /*
+ * Unlock the RTC's registers. For more details please see the
+ * RTC_SS section of the TRM. In order to unlock we need to
+ * write these specific values (keys) in this order.
+ */
+ writel(0x83e70b13, &rtc->kick0r);
+ writel(0x95a4f1e0, &rtc->kick1r);
+
+ /* Enable the RTC 32K OSC by setting bits 3 and 6. */
+ writel((1 << 3) | (1 << 6), &rtc->osc);
+}
+
+static const struct ddr_data ddr3_data = {
+ .datardsratio0 = K4B2G1646EBIH9_RD_DQS,
+ .datawdsratio0 = K4B2G1646EBIH9_WR_DQS,
+ .datafwsratio0 = K4B2G1646EBIH9_PHY_FIFO_WE,
+ .datawrsratio0 = K4B2G1646EBIH9_PHY_WR_DATA,
+ .datadldiff0 = PHY_DLL_LOCK_DIFF,
+};
+
+static const struct cmd_control ddr3_cmd_ctrl_data = {
+ .cmd0csratio = K4B2G1646EBIH9_RATIO,
+ .cmd0dldiff = K4B2G1646EBIH9_DLL_LOCK_DIFF,
+ .cmd0iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
+
+ .cmd1csratio = K4B2G1646EBIH9_RATIO,
+ .cmd1dldiff = K4B2G1646EBIH9_DLL_LOCK_DIFF,
+ .cmd1iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
+
+ .cmd2csratio = K4B2G1646EBIH9_RATIO,
+ .cmd2dldiff = K4B2G1646EBIH9_DLL_LOCK_DIFF,
+ .cmd2iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
+};
+
+static struct emif_regs ddr3_emif_reg_data = {
+ .sdram_config = K4B2G1646EBIH9_EMIF_SDCFG,
+ .ref_ctrl = K4B2G1646EBIH9_EMIF_SDREF,
+ .sdram_tim1 = K4B2G1646EBIH9_EMIF_TIM1,
+ .sdram_tim2 = K4B2G1646EBIH9_EMIF_TIM2,
+ .sdram_tim3 = K4B2G1646EBIH9_EMIF_TIM3,
+ .zq_config = K4B2G1646EBIH9_ZQ_CFG,
+ .emif_ddr_phy_ctlr_1 = K4B2G1646EBIH9_EMIF_READ_LATENCY,
+};
+#endif
+
+/*
+ * Early system init of muxing and clocks.
+ */
+void s_init(void)
+{
+ /*
+ * Save the boot parameters passed from romcode.
+ * We cannot delay the saving further than this,
+ * to prevent overwrites.
+ */
+#ifdef CONFIG_SPL_BUILD
+ save_omap_boot_params();
+#endif
+
+ /* WDT1 is already running when the bootloader gets control
+ * Disable it to avoid "random" resets
+ */
+ writel(0xAAAA, &wdtimer->wdtwspr);
+ while (readl(&wdtimer->wdtwwps) != 0x0)
+ ;
+ writel(0x5555, &wdtimer->wdtwspr);
+ while (readl(&wdtimer->wdtwwps) != 0x0)
+ ;
+
+#ifdef CONFIG_SPL_BUILD
+ /* Setup the PLLs and the clocks for the peripherals */
+ pll_init();
+
+ /* Enable RTC32K clock */
+ rtc32k_enable();
+
+ /* UART softreset */
+ u32 regval;
+
+ enable_uart0_pin_mux();
+
+ regval = readl(&uart_base->uartsyscfg);
+ regval |= UART_RESET;
+ writel(regval, &uart_base->uartsyscfg);
+ while ((readl(&uart_base->uartsyssts) &
+ UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
+ ;
+
+ /* Disable smart idle */
+ regval = readl(&uart_base->uartsyscfg);
+ regval |= UART_SMART_IDLE_EN;
+ writel(regval, &uart_base->uartsyscfg);
+
+ gd = &gdata;
+
+ preloader_console_init();
+
+ /* Configure board pin mux */
+ enable_board_pin_mux();
+
+ config_ddr(303, K4B2G1646EBIH9_IOCTRL_VALUE, &ddr3_data,
+ &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
+#endif
+}
+
+/*
+ * Basic board specific setup. Pinmux has been handled already.
+ */
+int board_init(void)
+{
+ gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
+
+ gpmc_init();
+
+ return 0;
+}
+
+#if defined(CONFIG_DRIVER_TI_CPSW)
+static void cpsw_control(int enabled)
+{
+ /* VTP can be added here */
+
+ return;
+}
+
+static struct cpsw_slave_data cpsw_slaves[] = {
+ {
+ .slave_reg_ofs = 0x208,
+ .sliver_reg_ofs = 0xd80,
+ .phy_id = 0,
+ .phy_if = PHY_INTERFACE_MODE_RMII,
+ },
+};
+
+static struct cpsw_platform_data cpsw_data = {
+ .mdio_base = CPSW_MDIO_BASE,
+ .cpsw_base = CPSW_BASE,
+ .mdio_div = 0xff,
+ .channels = 8,
+ .cpdma_reg_ofs = 0x800,
+ .slaves = 1,
+ .slave_data = cpsw_slaves,
+ .ale_reg_ofs = 0xd00,
+ .ale_entries = 1024,
+ .host_port_reg_ofs = 0x108,
+ .hw_stats_reg_ofs = 0x900,
+ .mac_control = (1 << 5),
+ .control = cpsw_control,
+ .host_port_num = 0,
+ .version = CPSW_CTRL_VERSION_2,
+};
+
+int board_eth_init(bd_t *bis)
+{
+ int rv, ret = 0;
+ uint8_t mac_addr[6];
+ uint32_t mac_hi, mac_lo;
+
+ if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
+ /* try reading mac address from efuse */
+ mac_lo = readl(&cdev->macid0l);
+ mac_hi = readl(&cdev->macid0h);
+ mac_addr[0] = mac_hi & 0xFF;
+ mac_addr[1] = (mac_hi & 0xFF00) >> 8;
+ mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
+ mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
+ mac_addr[4] = mac_lo & 0xFF;
+ mac_addr[5] = (mac_lo & 0xFF00) >> 8;
+ if (is_valid_ether_addr(mac_addr))
+ eth_setenv_enetaddr("ethaddr", mac_addr);
+ }
+
+ writel(RMII_MODE_ENABLE, &cdev->miisel);
+
+ rv = cpsw_register(&cpsw_data);
+ if (rv < 0)
+ printf("Error %d registering CPSW switch\n", rv);
+ else
+ ret += rv;
+
+ return ret;
+}
+#endif
+
diff --git a/board/isee/igep0033/board.h b/board/isee/igep0033/board.h
new file mode 100644
index 0000000..37988e0
--- /dev/null
+++ b/board/isee/igep0033/board.h
@@ -0,0 +1,27 @@
+/*
+ * IGEP COM AQUILA/CYGNUS boards information header
+ *
+ * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * We must be able to enable uart0, for initial output. We then have a
+ * main pinmux function that can be overridden to enable all other pinmux that
+ * is required on the board.
+ */
+void enable_uart0_pin_mux(void);
+void enable_board_pin_mux(void);
+#endif
diff --git a/board/isee/igep0033/mux.c b/board/isee/igep0033/mux.c
new file mode 100644
index 0000000..16f4add
--- /dev/null
+++ b/board/isee/igep0033/mux.c
@@ -0,0 +1,89 @@
+/*
+ * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/mux.h>
+#include <asm/io.h>
+#include <i2c.h>
+#include "board.h"
+
+static struct module_pin_mux uart0_pin_mux[] = {
+ {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */
+ {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */
+ {-1},
+};
+
+static struct module_pin_mux mmc0_pin_mux[] = {
+ {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */
+ {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */
+ {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */
+ {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */
+ {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */
+ {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */
+ {OFFSET(mcasp0_aclkx), (MODE(4) | RXACTIVE)}, /* MMC0_CD */
+ {-1},
+};
+
+static struct module_pin_mux nand_pin_mux[] = {
+ {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */
+ {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */
+ {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */
+ {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */
+ {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */
+ {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */
+ {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */
+ {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */
+ {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
+ {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */
+ {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */
+ {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */
+ {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */
+ {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */
+ {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */
+ {-1},
+};
+
+static struct module_pin_mux rmii1_pin_mux[] = {
+ {OFFSET(mii1_txen), MODE(1)}, /* RMII1_TXEN */
+ {OFFSET(mii1_rxerr), MODE(1) | RXACTIVE}, /* RMII1_RXERR */
+ {OFFSET(mii1_crs), MODE(1) | RXACTIVE}, /* RMII1_CRS_DV */
+ {OFFSET(mii1_rxd0), MODE(1) | RXACTIVE}, /* RMII1_RXD0 */
+ {OFFSET(mii1_rxd1), MODE(1) | RXACTIVE}, /* RMII1_RXD1 */
+ {OFFSET(mii1_txd0), MODE(1)}, /* RMII1_TXD0 */
+ {OFFSET(mii1_txd1), MODE(1)}, /* RMII1_TXD1 */
+ {OFFSET(rmii1_refclk), MODE(0) | RXACTIVE}, /* RMII1_REF_CLK */
+ {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */
+ {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */
+ {-1},
+};
+
+void enable_uart0_pin_mux(void)
+{
+ configure_module_pin_mux(uart0_pin_mux);
+}
+
+/*
+ * Do board-specific muxes.
+ */
+void enable_board_pin_mux(void)
+{
+ /* NAND Flash */
+ configure_module_pin_mux(nand_pin_mux);
+ /* SD Card */
+ configure_module_pin_mux(mmc0_pin_mux);
+ /* Ethernet pinmux. */
+ configure_module_pin_mux(rmii1_pin_mux);
+}
+
diff --git a/board/karo/tx25/tx25.c b/board/karo/tx25/tx25.c
index 85719a0..461e21f 100644
--- a/board/karo/tx25/tx25.c
+++ b/board/karo/tx25/tx25.c
@@ -27,51 +27,72 @@
#include <common.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
-#include <asm/arch/imx25-pinmux.h>
+#include <asm/arch/iomux-mx25.h>
#include <asm/gpio.h>
-#include <asm/arch/sys_proto.h>
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_SPL_BUILD
void board_init_f(ulong bootflag)
{
- relocate_code(CONFIG_SPL_TEXT_BASE);
+ /*
+ * copy ourselves from where we are running to where we were
+ * linked at. Use ulong pointers as all addresses involved
+ * are 4-byte-aligned.
+ */
+ ulong *start_ptr, *end_ptr, *link_ptr, *run_ptr, *dst;
+ asm volatile ("ldr %0, =_start" : "=r"(start_ptr));
+ asm volatile ("ldr %0, =_end" : "=r"(end_ptr));
+ asm volatile ("ldr %0, =board_init_f" : "=r"(link_ptr));
+ asm volatile ("adr %0, board_init_f" : "=r"(run_ptr));
+ for (dst = start_ptr; dst < end_ptr; dst++)
+ *dst = *(dst+(run_ptr-link_ptr));
+ /*
+ * branch to nand_boot's link-time address.
+ */
asm volatile("ldr pc, =nand_boot");
}
#endif
#ifdef CONFIG_FEC_MXC
+/*
+ * FIXME: need to revisit this
+ * The original code enabled PUE and 100-k pull-down without PKE, so the right
+ * value here is likely:
+ * 0 for no pull
+ * or:
+ * PAD_CTL_PUS_100K_DOWN for 100-k pull-down
+ */
+#define FEC_OUT_PAD_CTRL 0
+
#define GPIO_FEC_RESET_B IMX_GPIO_NR(4, 7)
#define GPIO_FEC_ENABLE_B IMX_GPIO_NR(4, 9)
void tx25_fec_init(void)
{
- struct iomuxc_mux_ctl *muxctl;
- struct iomuxc_pad_ctl *padctl;
- u32 gpio_mux_mode = MX25_PIN_MUX_MODE(5);
- u32 saved_rdata0_mode, saved_rdata1_mode, saved_rx_dv_mode;
+ static const iomux_v3_cfg_t fec_pads[] = {
+ MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
+ MX25_PAD_FEC_RX_DV__FEC_RX_DV,
+ MX25_PAD_FEC_RDATA0__FEC_RDATA0,
+ NEW_PAD_CTRL(MX25_PAD_FEC_TDATA0__FEC_TDATA0, FEC_OUT_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_FEC_TX_EN__FEC_TX_EN, FEC_OUT_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_FEC_MDC__FEC_MDC, FEC_OUT_PAD_CTRL),
+ MX25_PAD_FEC_MDIO__FEC_MDIO,
+ MX25_PAD_FEC_RDATA1__FEC_RDATA1,
+ NEW_PAD_CTRL(MX25_PAD_FEC_TDATA1__FEC_TDATA1, FEC_OUT_PAD_CTRL),
+
+ NEW_PAD_CTRL(MX25_PAD_D13__GPIO_4_7, 0), /* FEC_RESET_B */
+ NEW_PAD_CTRL(MX25_PAD_D11__GPIO_4_9, 0), /* FEC_ENABLE_B */
+ };
+
+ static const iomux_v3_cfg_t fec_cfg_pads[] = {
+ MX25_PAD_FEC_RDATA0__GPIO_3_10,
+ MX25_PAD_FEC_RDATA1__GPIO_3_11,
+ MX25_PAD_FEC_RX_DV__GPIO_3_12,
+ };
debug("tx25_fec_init\n");
- /*
- * fec pin init is generic
- */
- mx25_fec_init_pins();
-
- /*
- * Set up the FEC_RESET_B and FEC_ENABLE GPIO pins.
- *
- * FEC_RESET_B: gpio4[7] is ALT 5 mode of pin D13
- * FEC_ENABLE_B: gpio4[9] is ALT 5 mode of pin D11
- */
- muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE;
- padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE;
-
- writel(gpio_mux_mode, &muxctl->pad_d13);
- writel(gpio_mux_mode, &muxctl->pad_d11);
-
- writel(0x0, &padctl->pad_d13);
- writel(0x0, &padctl->pad_d11);
+ imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
/* drop PHY power and assert reset (low) */
gpio_direction_output(GPIO_FEC_RESET_B, 0);
@@ -99,15 +120,10 @@
* RMII mode is selected by FEC_RX_DV which is GPIO 3_12 in mux mode
*/
/*
- * save three current mux modes and set each to gpio mode
+ * set each mux mode to gpio mode
*/
- saved_rdata0_mode = readl(&muxctl->pad_fec_rdata0);
- saved_rdata1_mode = readl(&muxctl->pad_fec_rdata1);
- saved_rx_dv_mode = readl(&muxctl->pad_fec_rx_dv);
-
- writel(gpio_mux_mode, &muxctl->pad_fec_rdata0);
- writel(gpio_mux_mode, &muxctl->pad_fec_rdata1);
- writel(gpio_mux_mode, &muxctl->pad_fec_rx_dv);
+ imx_iomux_v3_setup_multiple_pads(fec_cfg_pads,
+ ARRAY_SIZE(fec_cfg_pads));
/*
* set each to 1 and make each an output
@@ -128,19 +144,46 @@
/*
* set FEC pins back
*/
- writel(saved_rdata0_mode, &muxctl->pad_fec_rdata0);
- writel(saved_rdata1_mode, &muxctl->pad_fec_rdata1);
- writel(saved_rx_dv_mode, &muxctl->pad_fec_rx_dv);
+ imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
}
#else
#define tx25_fec_init()
#endif
+#ifdef CONFIG_MXC_UART
+/*
+ * Set up input pins with hysteresis and 100-k pull-ups
+ */
+#define UART1_IN_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP)
+/*
+ * FIXME: need to revisit this
+ * The original code enabled PUE and 100-k pull-down without PKE, so the right
+ * value here is likely:
+ * 0 for no pull
+ * or:
+ * PAD_CTL_PUS_100K_DOWN for 100-k pull-down
+ */
+#define UART1_OUT_PAD_CTRL 0
+
+static void tx25_uart1_init(void)
+{
+ static const iomux_v3_cfg_t uart1_pads[] = {
+ NEW_PAD_CTRL(MX25_PAD_UART1_RXD__UART1_RXD, UART1_IN_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_UART1_TXD__UART1_TXD, UART1_OUT_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_UART1_RTS__UART1_RTS, UART1_OUT_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_UART1_CTS__UART1_CTS, UART1_IN_PAD_CTRL),
+ };
+
+ imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+}
+#else
+#define tx25_uart1_init()
+#endif
+
int board_init()
{
-#ifdef CONFIG_MXC_UART
- mx25_uart1_init_pins();
-#endif
+ tx25_uart1_init();
+
/* board id for linux */
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
return 0;
diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c
index eda9199..b944887 100644
--- a/board/keymile/km_arm/km_arm.c
+++ b/board/keymile/km_arm/km_arm.c
@@ -160,7 +160,7 @@
}
#endif
-int initialize_unit_leds(void)
+static int initialize_unit_leds(void)
{
/*
* Init the unit LEDs per default they all are
@@ -181,7 +181,7 @@
}
#if defined(CONFIG_BOOTCOUNT_LIMIT)
-void set_bootcount_addr(void)
+static void set_bootcount_addr(void)
{
uchar buf[32];
unsigned int bootcountaddr;
diff --git a/board/nokia/rx51/rx51.c b/board/nokia/rx51/rx51.c
index 48eb65f..42bf8b6 100644
--- a/board/nokia/rx51/rx51.c
+++ b/board/nokia/rx51/rx51.c
@@ -332,10 +332,10 @@
static void twl4030_regulator_set_mode(u8 id, u8 mode)
{
u16 msg = MSG_SINGULAR(DEV_GRP_P1, id, mode);
- twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, msg >> 8,
- TWL4030_PM_MASTER_PB_WORD_MSB);
- twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, msg & 0xff,
- TWL4030_PM_MASTER_PB_WORD_LSB);
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
+ TWL4030_PM_MASTER_PB_WORD_MSB, msg >> 8);
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
+ TWL4030_PM_MASTER_PB_WORD_LSB, msg & 0xff);
}
static void omap3_emu_romcode_call(u32 service_id, u32 *parameters)
@@ -406,12 +406,12 @@
TWL4030_PM_RECEIVER_DEV_GRP_P1);
/* store I2C access state */
- twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, &state,
- TWL4030_PM_MASTER_PB_CFG);
+ twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, TWL4030_PM_MASTER_PB_CFG,
+ &state);
/* enable I2C access to powerbus (needed for twl4030 regulator) */
- twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 0x02,
- TWL4030_PM_MASTER_PB_CFG);
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, TWL4030_PM_MASTER_PB_CFG,
+ 0x02);
/* set VAUX3, VSIM and VMMC1 state to active - enable eMMC memory */
twl4030_regulator_set_mode(RES_VAUX3, RES_STATE_ACTIVE);
@@ -419,8 +419,8 @@
twl4030_regulator_set_mode(RES_VMMC1, RES_STATE_ACTIVE);
/* restore I2C access state */
- twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, state,
- TWL4030_PM_MASTER_PB_CFG);
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, TWL4030_PM_MASTER_PB_CFG,
+ state);
/* set env variable attkernaddr for relocated kernel */
sprintf(buf, "%#x", KERNEL_ADDRESS);
@@ -475,14 +475,14 @@
return;
/* read actual watchdog timeout */
- twl4030_i2c_read_u8(TWL4030_CHIP_PM_RECEIVER, &timeout,
- TWL4030_PM_RECEIVER_WATCHDOG_CFG);
+ twl4030_i2c_read_u8(TWL4030_CHIP_PM_RECEIVER,
+ TWL4030_PM_RECEIVER_WATCHDOG_CFG, &timeout);
/* timeout 0 means watchdog is disabled */
/* reset watchdog timeout to 31s (maximum) */
if (timeout != 0)
- twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 31,
- TWL4030_PM_RECEIVER_WATCHDOG_CFG);
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER,
+ TWL4030_PM_RECEIVER_WATCHDOG_CFG, 31);
/* store last watchdog reset time */
twl_wd_time = get_timer(0);
@@ -531,8 +531,8 @@
{
int ret = 0;
u8 ctrl;
- ret = twl4030_i2c_read_u8(TWL4030_CHIP_KEYPAD, &ctrl,
- TWL4030_KEYPAD_KEYP_CTRL_REG);
+ ret = twl4030_i2c_read_u8(TWL4030_CHIP_KEYPAD,
+ TWL4030_KEYPAD_KEYP_CTRL_REG, &ctrl);
if (ret)
return ret;
@@ -541,18 +541,18 @@
ctrl |= TWL4030_KEYPAD_CTRL_KBD_ON;
ctrl |= TWL4030_KEYPAD_CTRL_SOFT_NRST;
ctrl |= TWL4030_KEYPAD_CTRL_SOFTMODEN;
- ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, ctrl,
- TWL4030_KEYPAD_KEYP_CTRL_REG);
+ ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD,
+ TWL4030_KEYPAD_KEYP_CTRL_REG, ctrl);
/* enable key event status */
- ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, 0xfe,
- TWL4030_KEYPAD_KEYP_IMR1);
+ ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD,
+ TWL4030_KEYPAD_KEYP_IMR1, 0xfe);
/* enable interrupt generation on rising and falling */
/* this is a workaround for qemu twl4030 emulation */
- ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, 0x57,
- TWL4030_KEYPAD_KEYP_EDR);
+ ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD,
+ TWL4030_KEYPAD_KEYP_EDR, 0x57);
/* enable ISR clear on read */
- ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, 0x05,
- TWL4030_KEYPAD_KEYP_SIH_CTRL);
+ ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD,
+ TWL4030_KEYPAD_KEYP_SIH_CTRL, 0x05);
return 0;
}
@@ -615,8 +615,8 @@
for (i = 0; i < 2; i++) {
/* check interrupt register for events */
- twl4030_i2c_read_u8(TWL4030_CHIP_KEYPAD, &intr,
- TWL4030_KEYPAD_KEYP_ISR1+(2*i));
+ twl4030_i2c_read_u8(TWL4030_CHIP_KEYPAD,
+ TWL4030_KEYPAD_KEYP_ISR1 + (2 * i), &intr);
/* no event */
if (!(intr&1))
diff --git a/board/nvidia/beaver/Makefile b/board/nvidia/beaver/Makefile
new file mode 100644
index 0000000..9510f60
--- /dev/null
+++ b/board/nvidia/beaver/Makefile
@@ -0,0 +1,38 @@
+#
+# Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+
+include $(TOPDIR)/config.mk
+
+$(shell mkdir -p $(obj)../cardhu)
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS = ../cardhu/cardhu.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/olimex/mx23_olinuxino/spl_boot.c b/board/olimex/mx23_olinuxino/spl_boot.c
index a96c293..6ba8c86 100644
--- a/board/olimex/mx23_olinuxino/spl_boot.c
+++ b/board/olimex/mx23_olinuxino/spl_boot.c
@@ -29,8 +29,8 @@
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
-#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_16MA | MXS_PAD_PULLUP)
-#define MUX_CONFIG_SSP (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
+#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP)
+#define MUX_CONFIG_SSP (MXS_PAD_8MA | MXS_PAD_PULLUP)
const iomux_cfg_t iomux_setup[] = {
/* DUART */
diff --git a/board/pandora/pandora.c b/board/pandora/pandora.c
index 9ff5dd7..5f0c58d 100644
--- a/board/pandora/pandora.c
+++ b/board/pandora/pandora.c
@@ -114,8 +114,9 @@
/* Enable battery backup capacitor (3.2V, 0.5mA charge current) */
twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER,
+ TWL4030_PM_RECEIVER_BB_CFG,
TWL4030_BB_CFG_BBCHEN | TWL4030_BB_CFG_BBSEL_3200MV |
- TWL4030_BB_CFG_BBISEL_500UA, TWL4030_PM_RECEIVER_BB_CFG);
+ TWL4030_BB_CFG_BBISEL_500UA);
dieid_num_r();
diff --git a/board/phytec/pcm051/board.c b/board/phytec/pcm051/board.c
index 43d7b6e..93c611d 100644
--- a/board/phytec/pcm051/board.c
+++ b/board/phytec/pcm051/board.c
@@ -115,6 +115,15 @@
void s_init(void)
{
/*
+ * Save the boot parameters passed from romcode.
+ * We cannot delay the saving further than this,
+ * to prevent overwrites.
+ */
+#ifdef CONFIG_SPL_BUILD
+ save_omap_boot_params();
+#endif
+
+ /*
* WDT1 is already running when the bootloader gets control
* Disable it to avoid "random" resets
*/
diff --git a/board/raspberrypi/rpi_b/rpi_b.c b/board/raspberrypi/rpi_b/rpi_b.c
index 6b3e095..16d442a 100644
--- a/board/raspberrypi/rpi_b/rpi_b.c
+++ b/board/raspberrypi/rpi_b/rpi_b.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2012 Stephen Warren
+ * (C) Copyright 2012-2013 Stephen Warren
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -15,6 +15,8 @@
*/
#include <common.h>
+#include <config.h>
+#include <lcd.h>
#include <asm/arch/mbox.h>
#include <asm/arch/sdhci.h>
#include <asm/global_data.h>
@@ -77,3 +79,13 @@
return bcm2835_sdhci_init(BCM2835_SDHCI_BASE,
msg_clk->get_clock_rate.body.resp.rate_hz);
}
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ /*
+ * For now, we simply always add the simplefb DT node. Later, we
+ * should be more intelligent, and e.g. only do this if no enabled DT
+ * node exists for the "real" graphics driver.
+ */
+ lcd_dt_simplefb_add_node(blob);
+}
diff --git a/board/syteco/zmx25/zmx25.c b/board/syteco/zmx25/zmx25.c
index 4f37c59..087d856 100644
--- a/board/syteco/zmx25/zmx25.c
+++ b/board/syteco/zmx25/zmx25.c
@@ -32,91 +32,85 @@
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
-#include <asm/arch/imx25-pinmux.h>
-#include <asm/arch/sys_proto.h>
+#include <asm/arch/iomux-mx25.h>
DECLARE_GLOBAL_DATA_PTR;
int board_init()
{
- struct iomuxc_mux_ctl *muxctl;
- struct iomuxc_pad_ctl *padctl;
- struct iomuxc_pad_input_select *inputselect;
- u32 gpio_mux_mode0_sion = MX25_PIN_MUX_MODE(0) | MX25_PIN_MUX_SION;
- u32 gpio_mux_mode1 = MX25_PIN_MUX_MODE(1);
- u32 gpio_mux_mode5 = MX25_PIN_MUX_MODE(5);
- u32 gpio_mux_mode6 = MX25_PIN_MUX_MODE(6);
- u32 input_select1 = MX25_PAD_INPUT_SELECT_DAISY(1);
- u32 input_select2 = MX25_PAD_INPUT_SELECT_DAISY(2);
+ static const iomux_v3_cfg_t sdhc1_pads[] = {
+ NEW_PAD_CTRL(MX25_PAD_SD1_CMD__SD1_CMD, NO_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_SD1_CLK__SD1_CLK, NO_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_SD1_DATA0__SD1_DATA0, NO_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_SD1_DATA1__SD1_DATA1, NO_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_SD1_DATA2__SD1_DATA2, NO_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_SD1_DATA3__SD1_DATA3, NO_PAD_CTRL),
+ };
+
+ static const iomux_v3_cfg_t dig_out_pads[] = {
+ MX25_PAD_CSI_D8__GPIO_1_7, /* Ouput 1 Ctrl */
+ MX25_PAD_CSI_D7__GPIO_1_6, /* Ouput 2 Ctrl */
+ NEW_PAD_CTRL(MX25_PAD_CSI_D6__GPIO_1_31, 0), /* Ouput 1 Stat */
+ NEW_PAD_CTRL(MX25_PAD_CSI_D5__GPIO_1_30, 0), /* Ouput 2 Stat */
+ };
+
+ static const iomux_v3_cfg_t led_pads[] = {
+ MX25_PAD_CSI_D9__GPIO_4_21,
+ MX25_PAD_CSI_D4__GPIO_1_29,
+ };
+
+ static const iomux_v3_cfg_t can_pads[] = {
+ NEW_PAD_CTRL(MX25_PAD_GPIO_A__CAN1_TX, NO_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_GPIO_B__CAN1_RX, NO_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_GPIO_C__CAN2_TX, NO_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_GPIO_D__CAN2_RX, NO_PAD_CTRL),
+ };
+
+ static const iomux_v3_cfg_t i2c3_pads[] = {
+ MX25_PAD_CSPI1_SS1__I2C3_DAT,
+ MX25_PAD_GPIO_E__I2C3_CLK,
+ };
icache_enable();
- muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE;
- padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE;
- inputselect = (struct iomuxc_pad_input_select *)IMX_IOPADINPUTSEL_BASE;
-
- /* Setup of core volatage selection pin to run at 1.4V */
- writel(gpio_mux_mode5, &muxctl->pad_ext_armclk); /* VCORE GPIO3[15] */
+ /* Setup of core voltage selection pin to run at 1.4V */
+ imx_iomux_v3_setup_pad(MX25_PAD_EXT_ARMCLK__GPIO_3_15); /* VCORE */
gpio_direction_output(IMX_GPIO_NR(3, 15), 1);
- /* Setup of input daisy chains for SD card pins*/
- writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_cmd);
- writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_clk);
- writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_data0);
- writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_data1);
- writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_data2);
- writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_data3);
+ /* Setup of SD card pins*/
+ imx_iomux_v3_setup_multiple_pads(sdhc1_pads, ARRAY_SIZE(sdhc1_pads));
/* Setup of digital output for USB power and OC */
- writel(gpio_mux_mode5, &muxctl->pad_csi_d3); /* USB Power GPIO1[28] */
+ imx_iomux_v3_setup_pad(MX25_PAD_CSI_D3__GPIO_1_28); /* USB Power */
gpio_direction_output(IMX_GPIO_NR(1, 28), 1);
- writel(gpio_mux_mode5, &muxctl->pad_csi_d2); /* USB OC GPIO1[27] */
+ imx_iomux_v3_setup_pad(MX25_PAD_CSI_D2__GPIO_1_27); /* USB OC */
gpio_direction_input(IMX_GPIO_NR(1, 18));
/* Setup of digital output control pins */
- writel(gpio_mux_mode5, &muxctl->pad_csi_d8); /* Ouput 1 Ctrl GPIO1[7] */
- writel(gpio_mux_mode5, &muxctl->pad_csi_d7); /* Ouput 2 Ctrl GPIO1[6] */
- writel(gpio_mux_mode5, &muxctl->pad_csi_d6); /* Ouput 1 Stat GPIO1[31]*/
- writel(gpio_mux_mode5, &muxctl->pad_csi_d5); /* Ouput 2 Stat GPIO1[30]*/
-
- writel(0, &padctl->pad_csi_d6); /* Ouput 1 Stat pull up off */
- writel(0, &padctl->pad_csi_d5); /* Ouput 2 Stat pull up off */
+ imx_iomux_v3_setup_multiple_pads(dig_out_pads,
+ ARRAY_SIZE(dig_out_pads));
/* Switch both output drivers off */
gpio_direction_output(IMX_GPIO_NR(1, 7), 0);
gpio_direction_output(IMX_GPIO_NR(1, 6), 0);
- /* Setup of key input pin GPIO2[29]*/
- writel(gpio_mux_mode5 | MX25_PIN_MUX_SION, &muxctl->pad_kpp_row0);
- writel(0, &padctl->pad_kpp_row0); /* Key pull up off */
+ /* Setup of key input pin */
+ imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX25_PAD_KPP_ROW0__GPIO_2_29, 0));
gpio_direction_input(IMX_GPIO_NR(2, 29));
/* Setup of status LED outputs */
- writel(gpio_mux_mode5, &muxctl->pad_csi_d9); /* GPIO4[21] */
- writel(gpio_mux_mode5, &muxctl->pad_csi_d4); /* GPIO1[29] */
+ imx_iomux_v3_setup_multiple_pads(led_pads, ARRAY_SIZE(led_pads));
/* Switch both LEDs off */
gpio_direction_output(IMX_GPIO_NR(4, 21), 0);
gpio_direction_output(IMX_GPIO_NR(1, 29), 0);
/* Setup of CAN1 and CAN2 signals */
- writel(gpio_mux_mode6, &muxctl->pad_gpio_a); /* CAN1 TX */
- writel(gpio_mux_mode6, &muxctl->pad_gpio_b); /* CAN1 RX */
- writel(gpio_mux_mode6, &muxctl->pad_gpio_c); /* CAN2 TX */
- writel(gpio_mux_mode6, &muxctl->pad_gpio_d); /* CAN2 RX */
-
- /* Setup of input daisy chains for CAN signals*/
- writel(input_select1, &inputselect->can1_ipp_ind_canrx); /* CAN1 RX */
- writel(input_select1, &inputselect->can2_ipp_ind_canrx); /* CAN2 RX */
+ imx_iomux_v3_setup_multiple_pads(can_pads, ARRAY_SIZE(can_pads));
/* Setup of I2C3 signals */
- writel(gpio_mux_mode1, &muxctl->pad_cspi1_ss1); /* I2C3 SDA */
- writel(gpio_mux_mode1, &muxctl->pad_gpio_e); /* I2C3 SCL */
-
- /* Setup of input daisy chains for I2C3 signals*/
- writel(input_select1, &inputselect->i2c3_ipp_sda_in); /* I2C3 SDA */
- writel(input_select2, &inputselect->i2c3_ipp_scl_in); /* I2C3 SCL */
+ imx_iomux_v3_setup_multiple_pads(i2c3_pads, ARRAY_SIZE(i2c3_pads));
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
@@ -128,25 +122,32 @@
const char *e;
#ifdef CONFIG_FEC_MXC
- struct iomuxc_mux_ctl *muxctl;
- u32 gpio_mux_mode2 = MX25_PIN_MUX_MODE(2);
- u32 gpio_mux_mode5 = MX25_PIN_MUX_MODE(5);
+/*
+ * FIXME: need to revisit this
+ * The original code enabled PUE and 100-k pull-down without PKE, so the right
+ * value here is likely:
+ * 0 for no pull
+ * or:
+ * PAD_CTL_PUS_100K_DOWN for 100-k pull-down
+ */
+#define FEC_OUT_PAD_CTRL 0
- /*
- * fec pin init is generic
- */
- mx25_fec_init_pins();
+ static const iomux_v3_cfg_t fec_pads[] = {
+ MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
+ MX25_PAD_FEC_RX_DV__FEC_RX_DV,
+ MX25_PAD_FEC_RDATA0__FEC_RDATA0,
+ NEW_PAD_CTRL(MX25_PAD_FEC_TDATA0__FEC_TDATA0, FEC_OUT_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_FEC_TX_EN__FEC_TX_EN, FEC_OUT_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_FEC_MDC__FEC_MDC, FEC_OUT_PAD_CTRL),
+ MX25_PAD_FEC_MDIO__FEC_MDIO,
+ MX25_PAD_FEC_RDATA1__FEC_RDATA1,
+ NEW_PAD_CTRL(MX25_PAD_FEC_TDATA1__FEC_TDATA1, FEC_OUT_PAD_CTRL),
- /*
- * Set up LAN-RESET and FEC_RX_ERR
- *
- * LAN-RESET: GPIO3[16] is ALT 5 mode of pin U20
- * FEC_RX_ERR: FEC_RX_ERR is ALT 2 mode of pin R2
- */
- muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE;
+ MX25_PAD_UPLL_BYPCLK__GPIO_3_16, /* LAN-RESET */
+ MX25_PAD_UART2_CTS__FEC_RX_ER, /* FEC_RX_ERR */
+ };
- writel(gpio_mux_mode5, &muxctl->pad_upll_bypclk);
- writel(gpio_mux_mode2, &muxctl->pad_uart2_cts);
+ imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
/* assert PHY reset (low) */
gpio_direction_output(IMX_GPIO_NR(3, 16), 0);
diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c
index 8347cf9..5c73098 100644
--- a/board/teejet/mt_ventoux/mt_ventoux.c
+++ b/board/teejet/mt_ventoux/mt_ventoux.c
@@ -31,7 +31,7 @@
#include <asm/omap_gpio.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/dss.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
#include <i2c.h>
#include <spartan3.h>
#include <asm/gpio.h>
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index b371376..638cc4d 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -297,6 +297,15 @@
.emif_ddr_phy_ctlr_1 = MT41J512M8RH125_EMIF_READ_LATENCY |
PHY_EN_DYN_PWRDN,
};
+
+#ifdef CONFIG_SPL_OS_BOOT
+int spl_start_uboot(void)
+{
+ /* break into full u-boot on 'c' */
+ return (serial_tstc() && serial_getc() == 'c');
+}
+#endif
+
#endif
/*
@@ -304,6 +313,15 @@
*/
void s_init(void)
{
+ /*
+ * Save the boot parameters passed from romcode.
+ * We cannot delay the saving further than this,
+ * to prevent overwrites.
+ */
+#ifdef CONFIG_SPL_BUILD
+ save_omap_boot_params();
+#endif
+
/* WDT1 is already running when the bootloader gets control
* Disable it to avoid "random" resets
*/
@@ -496,6 +514,7 @@
eth_setenv_enetaddr("ethaddr", mac_addr);
}
+#ifdef CONFIG_DRIVER_TI_CPSW
if (board_is_bone() || board_is_bone_lt() || board_is_idk()) {
writel(MII_MODE_ENABLE, &cdev->miisel);
cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
@@ -511,6 +530,7 @@
printf("Error %d registering CPSW switch\n", rv);
else
n += rv;
+#endif
/*
*
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index 3d9b6dd..c686f40 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -108,13 +108,14 @@
/*
* Routine: get_board_revision
* Description: Detect if we are running on a Beagle revision Ax/Bx,
- * C1/2/3, C4 or xM. This can be done by reading
+ * C1/2/3, C4, xM Ax/Bx or xM Cx. This can be done by reading
* the level of GPIO173, GPIO172 and GPIO171. This should
* result in
* GPIO173, GPIO172, GPIO171: 1 1 1 => Ax/Bx
* GPIO173, GPIO172, GPIO171: 1 1 0 => C1/2/3
* GPIO173, GPIO172, GPIO171: 1 0 1 => C4
- * GPIO173, GPIO172, GPIO171: 0 0 0 => xM
+ * GPIO173, GPIO172, GPIO171: 0 1 0 => xM Cx
+ * GPIO173, GPIO172, GPIO171: 0 0 0 => xM Ax/Bx
*/
static int get_board_revision(void)
{
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index 7bbb549..bf7e091 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -27,7 +27,7 @@
* MA 02111-1307 USA
*/
#include <common.h>
-#include <twl6035.h>
+#include <palmas.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/mmc_host_def.h>
diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h
index 04c95fd..338a241 100644
--- a/board/ti/dra7xx/mux_data.h
+++ b/board/ti/dra7xx/mux_data.h
@@ -29,19 +29,29 @@
#include <asm/arch/mux_dra7xx.h>
const struct pad_conf_entry core_padconf_array_essential[] = {
- {MMC1_CLK, (PTU | IEN | M0)}, /* MMC1_CLK */
- {MMC1_CMD, (PTU | IEN | M0)}, /* MMC1_CMD */
- {MMC1_DAT0, (PTU | IEN | M0)}, /* MMC1_DAT0 */
- {MMC1_DAT1, (PTU | IEN | M0)}, /* MMC1_DAT1 */
- {MMC1_DAT2, (PTU | IEN | M0)}, /* MMC1_DAT2 */
- {MMC1_DAT3, (PTU | IEN | M0)}, /* MMC1_DAT3 */
- {MMC1_SDCD, (PTU | IEN | M0)}, /* MMC1_SDCD */
- {MMC1_SDWP, (PTU | IEN | M0)}, /* MMC1_SDWP */
- {UART1_RXD, (PTU | IEN | M0)}, /* UART1_RXD */
- {UART1_TXD, (M0)}, /* UART1_TXD */
- {UART1_CTSN, (PTU | IEN | M0)}, /* UART1_CTSN */
- {UART1_RTSN, (M0)}, /* UART1_RTSN */
- {I2C1_SDA, (PTU | IEN | M0)}, /* I2C1_SDA */
- {I2C1_SCL, (PTU | IEN | M0)}, /* I2C1_SCL */
+ {MMC1_CLK, (IEN | PTU | PDIS | M0)}, /* MMC1_CLK */
+ {MMC1_CMD, (IEN | PTU | PDIS | M0)}, /* MMC1_CMD */
+ {MMC1_DAT0, (IEN | PTU | PDIS | M0)}, /* MMC1_DAT0 */
+ {MMC1_DAT1, (IEN | PTU | PDIS | M0)}, /* MMC1_DAT1 */
+ {MMC1_DAT2, (IEN | PTU | PDIS | M0)}, /* MMC1_DAT2 */
+ {MMC1_DAT3, (IEN | PTU | PDIS | M0)}, /* MMC1_DAT3 */
+ {MMC1_SDCD, (FSC | IEN | PTU | PDIS | M0)}, /* MMC1_SDCD */
+ {MMC1_SDWP, (FSC | IEN | PTD | PEN | M14)}, /* MMC1_SDWP */
+ {GPMC_A19, (IEN | PTU | PDIS | M1)}, /* mmc2_dat4 */
+ {GPMC_A20, (IEN | PTU | PDIS | M1)}, /* mmc2_dat5 */
+ {GPMC_A21, (IEN | PTU | PDIS | M1)}, /* mmc2_dat6 */
+ {GPMC_A22, (IEN | PTU | PDIS | M1)}, /* mmc2_dat7 */
+ {GPMC_A23, (IEN | PTU | PDIS | M1)}, /* mmc2_clk */
+ {GPMC_A24, (IEN | PTU | PDIS | M1)}, /* mmc2_dat0 */
+ {GPMC_A25, (IEN | PTU | PDIS | M1)}, /* mmc2_dat1 */
+ {GPMC_A26, (IEN | PTU | PDIS | M1)}, /* mmc2_dat2 */
+ {GPMC_A27, (IEN | PTU | PDIS | M1)}, /* mmc2_dat3 */
+ {GPMC_CS1, (IEN | PTU | PDIS | M1)}, /* mmm2_cmd */
+ {UART1_RXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART1_RXD */
+ {UART1_TXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART1_TXD */
+ {UART1_CTSN, (IEN | PTU | PDIS | M3)}, /* UART1_CTSN */
+ {UART1_RTSN, (IEN | PTU | PDIS | M3)}, /* UART1_RTSN */
+ {I2C1_SDA, (IEN | PTU | PDIS | M0)}, /* I2C1_SDA */
+ {I2C1_SCL, (IEN | PTU | PDIS | M0)}, /* I2C1_SCL */
};
#endif /* _MUX_DATA_DRA7XX_H_ */
diff --git a/board/ti/omap2420h4/config.mk b/board/ti/omap2420h4/config.mk
deleted file mode 100644
index e5dff69..0000000
--- a/board/ti/omap2420h4/config.mk
+++ /dev/null
@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2004
-# Texas Instruments, <www.ti.com>
-#
-# TI H4 board with OMAP2420 (ARM1136) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# H4 has 1 bank of 32MB or 64MB mDDR-SDRAM on CS0
-# H4 has 1 bank of 32MB or 00MB mDDR-SDRAM on CS1
-# Physical Address:
-# 8000'0000 (bank0)
-# A000/0000 (bank1) ES2 will be configurable
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-
-# For use with external or internal boots.
-#CONFIG_SYS_TEXT_BASE = 0x80e80000
-
-# Used with full SRAM boot.
-# This is either with a GP system or a signed boot image.
-# easiest, and safest way to go if you can.
-#CONFIG_SYS_TEXT_BASE = 0x40270000
-
-
-# Handy to get symbols to debug ROM version.
-#CONFIG_SYS_TEXT_BASE = 0x0
-CONFIG_SYS_TEXT_BASE = 0x08000000
-#CONFIG_SYS_TEXT_BASE = 0x04000000
diff --git a/board/ti/omap2420h4/lowlevel_init.S b/board/ti/omap2420h4/lowlevel_init.S
deleted file mode 100644
index 731c552..0000000
--- a/board/ti/omap2420h4/lowlevel_init.S
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/omap2420.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/clocks.h>
-
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */
-
-/**************************************************************************
- * cpy_clk_code: relocates clock code into SRAM where its safer to execute
- * R1 = SRAM destination address.
- *************************************************************************/
-.global cpy_clk_code
- cpy_clk_code:
- /* Copy DPLL code into SRAM */
- adr r0, go_to_speed /* get addr of clock setting code */
- mov r2, #384 /* r2 size to copy (div by 32 bytes) */
- mov r1, r1 /* r1 <- dest address (passed in) */
- add r2, r2, r0 /* r2 <- source end address */
-next2:
- ldmia r0!, {r3-r10} /* copy from source address [r0] */
- stmia r1!, {r3-r10} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- bne next2
- mov pc, lr /* back to caller */
-
-/* ****************************************************************************
- * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed
- * -executed from SRAM.
- * R0 = PRCM_CLKCFG_CTRL - addr of valid reg
- * R1 = CM_CLKEN_PLL - addr dpll ctlr reg
- * R2 = dpll value
- * R3 = CM_IDLEST_CKGEN - addr dpll lock wait
- ******************************************************************************/
-.global go_to_speed
- go_to_speed:
- sub sp, sp, #0x4 /* get some stack space */
- str r4, [sp] /* save r4's value */
-
- /* move into fast relock bypass */
- ldr r8, pll_ctl_add
- mov r4, #0x2
- str r4, [r8]
- ldr r4, pll_stat
-block:
- ldr r8, [r4] /* wait for bypass to take effect */
- and r8, r8, #0x3
- cmp r8, #0x1
- bne block
-
- /* set new dpll dividers _after_ in bypass */
- ldr r4, pll_div_add
- ldr r8, pll_div_val
- str r8, [r4]
-
- /* now prepare GPMC (flash) for new dpll speed */
- /* flash needs to be stable when we jump back to it */
- ldr r4, cfg3_0_addr
- ldr r8, cfg3_0_val
- str r8, [r4]
- ldr r4, cfg4_0_addr
- ldr r8, cfg4_0_val
- str r8, [r4]
- ldr r4, cfg1_0_addr
- ldr r8, [r4]
- orr r8, r8, #0x3 /* up gpmc divider */
- str r8, [r4]
-
- /* setup to 2x loop though code. The first loop pre-loads the
- * icache, the 2nd commits the prcm config, and locks the dpll
- */
- mov r4, #0x1000 /* spin spin spin */
- mov r8, #0x4 /* first pass condition & set registers */
- cmp r8, #0x4
-2:
- ldrne r8, [r3] /* DPLL lock check */
- and r8, r8, #0x7
- cmp r8, #0x2
- beq 4f
-3:
- subeq r8, r8, #0x1
- streq r8, [r0] /* commit dividers (2nd time) */
- nop
-lloop1:
- sub r4, r4, #0x1 /* Loop currently necessary else bad jumps */
- nop
- cmp r4, #0x0
- bne lloop1
- mov r4, #0x40000
- cmp r8, #0x1
- nop
- streq r2, [r1] /* lock dpll (2nd time) */
- nop
-lloop2:
- sub r4, r4, #0x1 /* loop currently necessary else bad jumps */
- nop
- cmp r4, #0x0
- bne lloop2
- mov r4, #0x40000
- cmp r8, #0x1
- nop
- ldreq r8, [r3] /* get lock condition for dpll */
- cmp r8, #0x4 /* first time though? */
- bne 2b
- moveq r8, #0x2 /* set to dpll check condition. */
- beq 3b /* if condition not true branch */
-4:
- ldr r4, [sp]
- add sp, sp, #0x4 /* return stack space */
- mov pc, lr /* back to caller, locked */
-
-_go_to_speed: .word go_to_speed
-
-/* these constants need to be close for PIC code */
-cfg3_0_addr:
- .word GPMC_CONFIG3_0
-cfg3_0_val:
- .word H4_24XX_GPMC_CONFIG3_0
-cfg4_0_addr:
- .word GPMC_CONFIG4_0
-cfg4_0_val:
- .word H4_24XX_GPMC_CONFIG4_0
-cfg1_0_addr:
- .word GPMC_CONFIG1_0
-pll_ctl_add:
- .word CM_CLKEN_PLL
-pll_stat:
- .word CM_IDLEST_CKGEN
-pll_div_add:
- .word CM_CLKSEL1_PLL
-pll_div_val:
- .word DPLL_VAL /* DPLL setting (300MHz default) */
-
-.globl lowlevel_init
-lowlevel_init:
- ldr sp, SRAM_STACK
- str ip, [sp] /* stash old link register */
- mov ip, lr /* save link reg across call */
- bl s_init /* go setup pll,mux,memory */
- ldr ip, [sp] /* restore save ip */
- mov lr, ip /* restore link reg */
-
- /* map interrupt controller */
- ldr r0, VAL_INTH_SETUP
- mcr p15, 0, r0, c15, c2, 4
-
- /* back to arch calling code */
- mov pc, lr
-
- /* the literal pools origin */
- .ltorg
-
-REG_CONTROL_STATUS:
- .word CONTROL_STATUS
-VAL_INTH_SETUP:
- .word PERIFERAL_PORT_BASE
-SRAM_STACK:
- .word LOW_LEVEL_SRAM_STACK
diff --git a/board/ti/omap2420h4/mem.c b/board/ti/omap2420h4/mem.c
deleted file mode 100644
index ba3f12a..0000000
--- a/board/ti/omap2420h4/mem.c
+++ /dev/null
@@ -1,362 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/omap2420.h>
-#include <asm/io.h>
-#include <asm/arch/bits.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/clocks.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/sys_info.h>
-
-/************************************************************
- * sdelay() - simple spin loop. Will be constant time as
- * its generally used in 12MHz bypass conditions only. This
- * is necessary until timers are accessible.
- *
- * not inline to increase chances its in cache when called
- *************************************************************/
-void sdelay (unsigned long loops)
-{
- __asm__ volatile ("1:\n" "subs %0, %1, #1\n"
- "bne 1b":"=r" (loops):"0" (loops));
-}
-
-/*********************************************************************************
- * prcm_init() - inits clocks for PRCM as defined in clocks.h (config II default).
- * -- called from SRAM, or Flash (using temp SRAM stack).
- *********************************************************************************/
-void prcm_init(void)
-{
- u32 div;
- void (*f_lock_pll) (u32, u32, u32, u32);
- extern void *_end_vect, *_start;
-
- f_lock_pll = (void *)((u32)&_end_vect - (u32)&_start + SRAM_VECT_CODE);
-
- __raw_writel(0, CM_FCLKEN1_CORE); /* stop all clocks to reduce ringing */
- __raw_writel(0, CM_FCLKEN2_CORE); /* may not be necessary */
- __raw_writel(0, CM_ICLKEN1_CORE);
- __raw_writel(0, CM_ICLKEN2_CORE);
-
- __raw_writel(DPLL_OUT, CM_CLKSEL2_PLL); /* set DPLL out */
- __raw_writel(MPU_DIV, CM_CLKSEL_MPU); /* set MPU divider */
- __raw_writel(DSP_DIV, CM_CLKSEL_DSP); /* set dsp and iva dividers */
- __raw_writel(GFX_DIV, CM_CLKSEL_GFX); /* set gfx dividers */
-
- div = BUS_DIV;
- __raw_writel(div, CM_CLKSEL1_CORE);/* set L3/L4/USB/Display/Vlnc/SSi dividers */
- sdelay(1000);
-
- if(running_in_sram()){
- /* If running fully from SRAM this is OK. The Flash bus drops out for just a little.
- * but then comes back. If running from Flash this sequence kills you, thus you need
- * to run it using CONFIG_PARTIAL_SRAM.
- */
- __raw_writel(MODE_BYPASS_FAST, CM_CLKEN_PLL); /* go to bypass, fast relock */
- wait_on_value(BIT0|BIT1, BIT0, CM_IDLEST_CKGEN, LDELAY); /* wait till in bypass */
- sdelay(1000);
- /* set clock selection and dpll dividers. */
- __raw_writel(DPLL_VAL, CM_CLKSEL1_PLL); /* set pll for target rate */
- __raw_writel(COMMIT_DIVIDERS, PRCM_CLKCFG_CTRL); /* commit dividers */
- sdelay(10000);
- __raw_writel(DPLL_LOCK, CM_CLKEN_PLL); /* enable dpll */
- sdelay(10000);
- wait_on_value(BIT0|BIT1, BIT1, CM_IDLEST_CKGEN, LDELAY); /*wait for dpll lock */
- }else if(running_in_flash()){
- /* if running from flash, need to jump to small relocated code area in SRAM.
- * This is the only safe spot to do configurations from.
- */
- (*f_lock_pll)(PRCM_CLKCFG_CTRL, CM_CLKEN_PLL, DPLL_LOCK, CM_IDLEST_CKGEN);
- }
-
- __raw_writel(DPLL_LOCK|APLL_LOCK, CM_CLKEN_PLL); /* enable apll */
- wait_on_value(BIT8, BIT8, CM_IDLEST_CKGEN, LDELAY); /* wait for apll lock */
- sdelay(1000);
-}
-
-/**************************************************************************
- * make_cs1_contiguous() - for es2 and above remap cs1 behind cs0 to allow
- * command line mem=xyz use all memory with out discontigious support
- * compiled in. Could do it at the ATAG, but there really is two banks...
- * Called as part of 2nd phase DDR init.
- **************************************************************************/
-void make_cs1_contiguous(void)
-{
- u32 size, a_add_low, a_add_high;
-
- size = get_sdr_cs_size(SDRC_CS0_OSET);
- size /= SZ_32M; /* find size to offset CS1 */
- a_add_high = (size & 3) << 8; /* set up low field */
- a_add_low = (size & 0x3C) >> 2; /* set up high field */
- __raw_writel((a_add_high|a_add_low),SDRC_CS_CFG);
-
-}
-
-/********************************************************
- * mem_ok() - test used to see if timings are correct
- * for a part. Helps in gussing which part
- * we are currently using.
- *******************************************************/
-u32 mem_ok(void)
-{
- u32 val1, val2;
- u32 pattern = 0x12345678;
-
- __raw_writel(0x0,OMAP2420_SDRC_CS0+0x400); /* clear pos A */
- __raw_writel(pattern, OMAP2420_SDRC_CS0); /* pattern to pos B */
- __raw_writel(0x0,OMAP2420_SDRC_CS0+4); /* remove pattern off the bus */
- val1 = __raw_readl(OMAP2420_SDRC_CS0+0x400); /* get pos A value */
- val2 = __raw_readl(OMAP2420_SDRC_CS0); /* get val2 */
-
- if ((val1 != 0) || (val2 != pattern)) /* see if pos A value changed*/
- return(0);
- else
- return(1);
-}
-
-
-/********************************************************
- * sdrc_init() - init the sdrc chip selects CS0 and CS1
- * - early init routines, called from flash or
- * SRAM.
- *******************************************************/
-void sdrc_init(void)
-{
- #define EARLY_INIT 1
- do_sdrc_init(SDRC_CS0_OSET, EARLY_INIT); /* only init up first bank here */
-}
-
-/*************************************************************************
- * do_sdrc_init(): initialize the SDRAM for use.
- * -called from low level code with stack only.
- * -code sets up SDRAM timing and muxing for 2422 or 2420.
- * -optimal settings can be placed here, or redone after i2c
- * inspection of board info
- *
- * This is a bit ugly, but should handle all memory moduels
- * used with the H4. The first time though this code from s_init()
- * we configure the first chip select. Later on we come back and
- * will configure the 2nd chip select if it exists.
- *
- **************************************************************************/
-void do_sdrc_init(u32 offset, u32 early)
-{
- u32 cpu, dllen=0, rev, common=0, cs0=0, pmask=0, pass_type, mtype;
- sdrc_data_t *sdata; /* do not change type */
- u32 a, b, r;
-
- static const sdrc_data_t sdrc_2422 =
- {
- H4_2422_SDRC_SHARING, H4_2422_SDRC_MDCFG_0_DDR, 0 , H4_2422_SDRC_ACTIM_CTRLA_0,
- H4_2422_SDRC_ACTIM_CTRLB_0, H4_2422_SDRC_RFR_CTRL, H4_2422_SDRC_MR_0_DDR,
- 0, H4_2422_SDRC_DLLAB_CTRL
- };
- static const sdrc_data_t sdrc_2420 =
- {
- H4_2420_SDRC_SHARING, H4_2420_SDRC_MDCFG_0_DDR, H4_2420_SDRC_MDCFG_0_SDR,
- H4_2420_SDRC_ACTIM_CTRLA_0, H4_2420_SDRC_ACTIM_CTRLB_0,
- H4_2420_SDRC_RFR_CTRL, H4_2420_SDRC_MR_0_DDR, H4_2420_SDRC_MR_0_SDR,
- H4_2420_SDRC_DLLAB_CTRL
- };
-
- if (offset == SDRC_CS0_OSET)
- cs0 = common = 1; /* int regs shared between both chip select */
-
- cpu = get_cpu_type();
- rev = get_cpu_rev();
-
- /* warning generated, though code generation is correct. this may bite later,
- * but is ok for now. there is only so much C code you can do on stack only
- * operation.
- */
- if (cpu == CPU_2422){
- sdata = (sdrc_data_t *)&sdrc_2422;
- pass_type = STACKED;
- } else{
- sdata = (sdrc_data_t *)&sdrc_2420;
- pass_type = IP_DDR;
- }
-
- __asm__ __volatile__("": : :"memory"); /* limit compiler scope */
-
- if (!early && (((mtype = get_mem_type()) == DDR_COMBO)||(mtype == DDR_STACKED))) {
- if(mtype == DDR_COMBO){
- pmask = BIT2;/* combo part has a shared CKE signal, can't use feature */
- pass_type = COMBO_DDR; /* CS1 config */
- __raw_writel((__raw_readl(SDRC_POWER)) & ~pmask, SDRC_POWER);
- }
- if(rev != CPU_2420_2422_ES1) /* for es2 and above smooth things out */
- make_cs1_contiguous();
- }
-
-next_mem_type:
- if (common) { /* do a SDRC reset between types to clear regs*/
- __raw_writel(SOFTRESET, SDRC_SYSCONFIG); /* reset sdrc */
- wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000);/* wait till reset done set */
- __raw_writel(0, SDRC_SYSCONFIG); /* clear soft reset */
- __raw_writel(sdata->sdrc_sharing, SDRC_SHARING);
-#ifdef POWER_SAVE
- __raw_writel(__raw_readl(SMS_SYSCONFIG)|SMART_IDLE, SMS_SYSCONFIG);
- __raw_writel(sdata->sdrc_sharing|SMART_IDLE, SDRC_SHARING);
- __raw_writel((__raw_readl(SDRC_POWER)|BIT6), SDRC_POWER);
-#endif
- }
-
- if ((pass_type == IP_DDR) || (pass_type == STACKED)) /* (IP ddr-CS0),(2422-CS0/CS1) */
- __raw_writel(sdata->sdrc_mdcfg_0_ddr, SDRC_MCFG_0+offset);
- else if (pass_type == COMBO_DDR){ /* (combo-CS0/CS1) */
- __raw_writel(H4_2420_COMBO_MDCFG_0_DDR,SDRC_MCFG_0+offset);
- } else if (pass_type == IP_SDR){ /* ip sdr-CS0 */
- __raw_writel(sdata->sdrc_mdcfg_0_sdr, SDRC_MCFG_0+offset);
- }
-
- a = sdata->sdrc_actim_ctrla_0;
- b = sdata->sdrc_actim_ctrlb_0;
- r = sdata->sdrc_dllab_ctrl;
-
- /* work around ES1 DDR issues */
- if((pass_type != IP_SDR) && (rev == CPU_2420_2422_ES1)){
- a = H4_242x_SDRC_ACTIM_CTRLA_0_ES1;
- b = H4_242x_SDRC_ACTIM_CTRLB_0_ES1;
- r = H4_242x_SDRC_RFR_CTRL_ES1;
- }
-
- if (cs0) {
- __raw_writel(a, SDRC_ACTIM_CTRLA_0);
- __raw_writel(b, SDRC_ACTIM_CTRLB_0);
- } else {
- __raw_writel(a, SDRC_ACTIM_CTRLA_1);
- __raw_writel(b, SDRC_ACTIM_CTRLB_1);
- }
- __raw_writel(r, SDRC_RFR_CTRL+offset);
-
- /* init sequence for mDDR/mSDR using manual commands (DDR is a bit different) */
- __raw_writel(CMD_NOP, SDRC_MANUAL_0+offset);
- sdelay(5000); /* susposed to be 100us per design spec for mddr/msdr */
- __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0+offset);
- __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0+offset);
- __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0+offset);
-
- /*
- * CSx SDRC Mode Register
- * Burst length = (4 - DDR) (2-SDR)
- * Serial mode
- * CAS latency = x
- */
- if(pass_type == IP_SDR)
- __raw_writel(sdata->sdrc_mr_0_sdr, SDRC_MR_0+offset);
- else
- __raw_writel(sdata->sdrc_mr_0_ddr, SDRC_MR_0+offset);
-
- /* NOTE: ES1 242x _BUG_ DLL + External Bandwidth fix*/
- if (rev == CPU_2420_2422_ES1){
- dllen = (BIT0|BIT3); /* es1 clear both bit0 and bit3 */
- __raw_writel((__raw_readl(SMS_CLASS_ARB0)|BURSTCOMPLETE_GROUP7)
- ,SMS_CLASS_ARB0);/* enable bust complete for lcd */
- }
- else
- dllen = BIT0|BIT1; /* es2, clear bit0, and 1 (set phase to 72) */
-
- /* enable & load up DLL with good value for 75MHz, and set phase to 90
- * ES1 recommends 90 phase, ES2 recommends 72 phase.
- */
- if (common && (pass_type != IP_SDR)) {
- __raw_writel(sdata->sdrc_dllab_ctrl, SDRC_DLLA_CTRL);
- __raw_writel(sdata->sdrc_dllab_ctrl & ~(BIT2|dllen), SDRC_DLLA_CTRL);
- __raw_writel(sdata->sdrc_dllab_ctrl, SDRC_DLLB_CTRL);
- __raw_writel(sdata->sdrc_dllab_ctrl & ~(BIT2|dllen) , SDRC_DLLB_CTRL);
- }
- sdelay(90000);
-
- if(mem_ok())
- return; /* STACKED, other configued type */
- ++pass_type; /* IPDDR->COMBODDR->IPSDR for CS0 */
- goto next_mem_type;
-}
-
-/*****************************************************
- * gpmc_init(): init gpmc bus
- * Init GPMC for x16, MuxMode (SDRAM in x32).
- * This code can only be executed from SRAM or SDRAM.
- *****************************************************/
-void gpmc_init(void)
-{
- u32 mux=0, mtype, mwidth, rev, tval;
-
- rev = get_cpu_rev();
- if (rev == CPU_2420_2422_ES1)
- tval = 1;
- else
- tval = 0; /* disable bit switched meaning */
-
- /* global settings */
- __raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */
- __raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */
- __raw_writel(tval, GPMC_TIMEOUT_CONTROL);/* timeout disable */
-#ifdef CONFIG_SYS_NAND_BOOT
- __raw_writel(0x001, GPMC_CONFIG); /* set nWP, disable limited addr */
-#else
- __raw_writel(0x111, GPMC_CONFIG); /* set nWP, disable limited addr */
-#endif
-
- /* discover bus connection from sysboot */
- if (is_gpmc_muxed() == GPMC_MUXED)
- mux = BIT9;
- mtype = get_gpmc0_type();
- mwidth = get_gpmc0_width();
-
- /* setup cs0 */
- __raw_writel(0x0, GPMC_CONFIG7_0); /* disable current map */
- sdelay(1000);
-
-#ifdef CONFIG_SYS_NAND_BOOT
- __raw_writel(H4_24XX_GPMC_CONFIG1_0|mtype|mwidth, GPMC_CONFIG1_0);
-#else
- __raw_writel(H4_24XX_GPMC_CONFIG1_0|mux|mtype|mwidth, GPMC_CONFIG1_0);
-#endif
-
-#ifdef PRCM_CONFIG_III
- __raw_writel(H4_24XX_GPMC_CONFIG2_0, GPMC_CONFIG2_0);
-#endif
- __raw_writel(H4_24XX_GPMC_CONFIG3_0, GPMC_CONFIG3_0);
- __raw_writel(H4_24XX_GPMC_CONFIG4_0, GPMC_CONFIG4_0);
-#ifdef PRCM_CONFIG_III
- __raw_writel(H4_24XX_GPMC_CONFIG5_0, GPMC_CONFIG5_0);
- __raw_writel(H4_24XX_GPMC_CONFIG6_0, GPMC_CONFIG6_0);
-#endif
- __raw_writel(H4_24XX_GPMC_CONFIG7_0, GPMC_CONFIG7_0);/* enable new mapping */
- sdelay(2000);
-
- /* setup cs1 */
- __raw_writel(0, GPMC_CONFIG7_1); /* disable any mapping */
- sdelay(1000);
- __raw_writel(H4_24XX_GPMC_CONFIG1_1|mux, GPMC_CONFIG1_1);
- __raw_writel(H4_24XX_GPMC_CONFIG2_1, GPMC_CONFIG2_1);
- __raw_writel(H4_24XX_GPMC_CONFIG3_1, GPMC_CONFIG3_1);
- __raw_writel(H4_24XX_GPMC_CONFIG4_1, GPMC_CONFIG4_1);
- __raw_writel(H4_24XX_GPMC_CONFIG5_1, GPMC_CONFIG5_1);
- __raw_writel(H4_24XX_GPMC_CONFIG6_1, GPMC_CONFIG6_1);
- __raw_writel(H4_24XX_GPMC_CONFIG7_1, GPMC_CONFIG7_1); /* enable mapping */
- sdelay(2000);
-}
diff --git a/board/ti/omap2420h4/omap2420h4.c b/board/ti/omap2420h4/omap2420h4.c
deleted file mode 100644
index 532e989..0000000
--- a/board/ti/omap2420h4/omap2420h4.c
+++ /dev/null
@@ -1,867 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#include <netdev.h>
-#include <asm/arch/omap2420.h>
-#include <asm/io.h>
-#include <asm/arch/bits.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/sys_info.h>
-#include <asm/arch/mem.h>
-#include <i2c.h>
-#include <asm/mach-types.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void wait_for_command_complete(unsigned int wd_base);
-
-/*******************************************************
- * Routine: delay
- * Description: spinning delay to use before udelay works
- ******************************************************/
-static inline void delay (unsigned long loops)
-{
- __asm__ volatile ("1:\n" "subs %0, %1, #1\n"
- "bne 1b":"=r" (loops):"0" (loops));
-}
-
-/*****************************************
- * Routine: board_init
- * Description: Early hardware init.
- *****************************************/
-int board_init (void)
-{
- gpmc_init(); /* in SRAM or SDRM, finish GPMC */
-
- gd->bd->bi_arch_number = MACH_TYPE_OMAP_H4; /* board id for linux */
- gd->bd->bi_boot_params = (OMAP2420_SDRC_CS0+0x100); /* adress of boot parameters */
-
- return 0;
-}
-
-/**********************************************************
- * Routine: try_unlock_sram()
- * Description: If chip is GP type, unlock the SRAM for
- * general use.
- ***********************************************************/
-void try_unlock_sram(void)
-{
- /* if GP device unlock device SRAM for general use */
- if (get_device_type() == GP_DEVICE) {
- __raw_writel(0xFF, A_REQINFOPERM0);
- __raw_writel(0xCFDE, A_READPERM0);
- __raw_writel(0xCFDE, A_WRITEPERM0);
- }
-}
-
-/**********************************************************
- * Routine: s_init
- * Description: Does early system init of muxing and clocks.
- * - Called path is with sram stack.
- **********************************************************/
-void s_init(void)
-{
- int in_sdram = running_in_sdram();
-
- watchdog_init();
- set_muxconf_regs();
- delay(100);
- try_unlock_sram();
-
- if(!in_sdram)
- prcm_init();
-
- peripheral_enable();
- icache_enable();
- if (!in_sdram)
- sdrc_init();
-}
-
-/*******************************************************
- * Routine: misc_init_r
- * Description: Init ethernet (done here so udelay works)
- ********************************************************/
-int misc_init_r (void)
-{
- ether_init(); /* better done here so timers are init'ed */
- return(0);
-}
-
-/****************************************
- * Routine: watchdog_init
- * Description: Shut down watch dogs
- *****************************************/
-void watchdog_init(void)
-{
- /* There are 4 watch dogs. 1 secure, and 3 general purpose.
- * The ROM takes care of the secure one. Of the 3 GP ones,
- * 1 can reset us directly, the other 2 only generate MPU interrupts.
- */
- __raw_writel(WD_UNLOCK1 ,WD2_BASE+WSPR);
- wait_for_command_complete(WD2_BASE);
- __raw_writel(WD_UNLOCK2 ,WD2_BASE+WSPR);
-
-#if MPU_WD_CLOCKED /* value 0x10 stick on aptix, BIT4 polarity seems oppsite*/
- __raw_writel(WD_UNLOCK1 ,WD3_BASE+WSPR);
- wait_for_command_complete(WD3_BASE);
- __raw_writel(WD_UNLOCK2 ,WD3_BASE+WSPR);
-
- __raw_writel(WD_UNLOCK1 ,WD4_BASE+WSPR);
- wait_for_command_complete(WD4_BASE);
- __raw_writel(WD_UNLOCK2 ,WD4_BASE+WSPR);
-#endif
-}
-
-/******************************************************
- * Routine: wait_for_command_complete
- * Description: Wait for posting to finish on watchdog
- ******************************************************/
-void wait_for_command_complete(unsigned int wd_base)
-{
- int pending = 1;
- do {
- pending = __raw_readl(wd_base+WWPS);
- } while (pending);
-}
-
-/*******************************************************************
- * Routine:ether_init
- * Description: take the Ethernet controller out of reset and wait
- * for the EEPROM load to complete.
- ******************************************************************/
-void ether_init (void)
-{
-#ifdef CONFIG_LAN91C96
- int cnt = 20;
-
- __raw_writeb(0x3,OMAP2420_CTRL_BASE+0x10a); /*protect->gpio95 */
-
- __raw_writew(0x0, LAN_RESET_REGISTER);
- do {
- __raw_writew(0x1, LAN_RESET_REGISTER);
- udelay (100);
- if (cnt == 0)
- goto h4reset_err_out;
- --cnt;
- } while (__raw_readw(LAN_RESET_REGISTER) != 0x1);
-
- cnt = 20;
-
- do {
- __raw_writew(0x0, LAN_RESET_REGISTER);
- udelay (100);
- if (cnt == 0)
- goto h4reset_err_out;
- --cnt;
- } while (__raw_readw(LAN_RESET_REGISTER) != 0x0000);
- udelay (1000);
-
- *((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01;
- udelay (1000);
-
- h4reset_err_out:
- return;
-#endif
-}
-
-/**********************************************
- * Routine: dram_init
- * Description: sets uboots idea of sdram size
- **********************************************/
-int dram_init(void)
-{
- unsigned int size0=0,size1=0;
- u32 mtype, btype;
- u8 chg_on = 0x5; /* enable charge of back up battery */
- u8 vmode_on = 0x8C;
- #define NOT_EARLY 0
-
- i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); /* need this a bit early */
-
- btype = get_board_type();
- mtype = get_mem_type();
-
- display_board_info(btype);
- if (btype == BOARD_H4_MENELAUS){
- update_mux(btype,mtype); /* combo part on menelaus */
- i2c_write(I2C_MENELAUS, 0x20, 1, &chg_on, 1); /*fix POR reset bug */
- i2c_write(I2C_MENELAUS, 0x2, 1, &vmode_on, 1); /* VCORE change on VMODE */
- }
-
- if ((mtype == DDR_COMBO) || (mtype == DDR_STACKED)) {
- do_sdrc_init(SDRC_CS1_OSET, NOT_EARLY); /* init other chip select */
- }
- size0 = get_sdr_cs_size(SDRC_CS0_OSET);
- size1 = get_sdr_cs_size(SDRC_CS1_OSET);
-
- gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, size0 + size1);
-
- return 0;
-}
-
-void dram_init_banksize(void)
-{
- unsigned int size0, size1;
- u32 rev;
-
- rev = get_cpu_rev();
- size0 = get_sdr_cs_size(SDRC_CS0_OSET);
- size1 = get_sdr_cs_size(SDRC_CS1_OSET);
-
- if(rev == CPU_2420_2422_ES1) /* ES1's 128MB remap granularity isn't worth doing */
- gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
- else /* ES2 and above can remap at 32MB granularity */
- gd->bd->bi_dram[1].start = PHYS_SDRAM_1+size0;
- gd->bd->bi_dram[1].size = size1;
-
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = size0;
-}
-
-/**********************************************************
- * Routine: set_muxconf_regs
- * Description: Setting up the configuration Mux registers
- * specific to the hardware
- *********************************************************/
-void set_muxconf_regs (void)
-{
- muxSetupSDRC();
- muxSetupGPMC();
- muxSetupUsb0();
- muxSetupUart3();
- muxSetupI2C1();
- muxSetupUART1();
- muxSetupLCD();
- muxSetupCamera();
- muxSetupMMCSD();
- muxSetupTouchScreen();
- muxSetupHDQ();
-}
-
-/*****************************************************************
- * Routine: peripheral_enable
- * Description: Enable the clks & power for perifs (GPT2, UART1,...)
- ******************************************************************/
-void peripheral_enable(void)
-{
- unsigned int v, if_clks=0, func_clks=0;
-
- /* Enable GP2 timer.*/
- if_clks |= BIT4;
- func_clks |= BIT4;
- v = __raw_readl(CM_CLKSEL2_CORE) | 0x4; /* Sys_clk input OMAP2420_GPT2 */
- __raw_writel(v, CM_CLKSEL2_CORE);
- __raw_writel(0x1, CM_CLKSEL_WKUP);
-
-#ifdef CONFIG_SYS_NS16550
- /* Enable UART1 clock */
- func_clks |= BIT21;
- if_clks |= BIT21;
-#endif
- v = __raw_readl(CM_ICLKEN1_CORE) | if_clks; /* Interface clocks on */
- __raw_writel(v,CM_ICLKEN1_CORE );
- v = __raw_readl(CM_FCLKEN1_CORE) | func_clks; /* Functional Clocks on */
- __raw_writel(v, CM_FCLKEN1_CORE);
- delay(1000);
-
-#ifndef KERNEL_UPDATED
- {
-#define V1 0xffffffff
-#define V2 0x00000007
-
- __raw_writel(V1, CM_FCLKEN1_CORE);
- __raw_writel(V2, CM_FCLKEN2_CORE);
- __raw_writel(V1, CM_ICLKEN1_CORE);
- __raw_writel(V1, CM_ICLKEN2_CORE);
- }
-#endif
-}
-
-/****************************************
- * Routine: muxSetupUsb0 (ostboot)
- * Description: Setup usb muxing
- *****************************************/
-void muxSetupUsb0(void)
-{
- volatile uint8 *MuxConfigReg;
- volatile uint32 *otgCtrlReg;
-
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_PUEN;
- *MuxConfigReg &= (uint8)(~0x1F);
-
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_VP;
- *MuxConfigReg &= (uint8)(~0x1F);
-
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_VM;
- *MuxConfigReg &= (uint8)(~0x1F);
-
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_RCV;
- *MuxConfigReg &= (uint8)(~0x1F);
-
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_TXEN;
- *MuxConfigReg &= (uint8)(~0x1F);
-
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_SE0;
- *MuxConfigReg &= (uint8)(~0x1F);
-
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_DAT;
- *MuxConfigReg &= (uint8)(~0x1F);
-
- /* setup for USB VBus detection */
- otgCtrlReg = (volatile uint32 *)USB_OTG_CTRL;
- *otgCtrlReg |= 0x00040000; /* bit 18 */
-}
-
-/****************************************
- * Routine: muxSetupUart3 (ostboot)
- * Description: Setup uart3 muxing
- *****************************************/
-void muxSetupUart3(void)
-{
- volatile uint8 *MuxConfigReg;
-
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_UART3_TX_IRTX;
- *MuxConfigReg &= (uint8)(~0x1F);
-
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_UART3_RX_IRRX;
- *MuxConfigReg &= (uint8)(~0x1F);
-}
-
-/****************************************
- * Routine: muxSetupI2C1 (ostboot)
- * Description: Setup i2c muxing
- *****************************************/
-void muxSetupI2C1(void)
-{
- volatile unsigned char *MuxConfigReg;
-
- /* I2C1 Clock pin configuration, PIN = M19 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_I2C1_SCL;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* I2C1 Data pin configuration, PIN = L15 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_I2C1_SDA;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* Pull-up required on data line */
- /* external pull-up already present. */
- /* *MuxConfigReg |= 0x18 ;*/ /* Mode = 0, PullTypeSel=PU, PullUDEnable=Enabled */
-}
-
-/****************************************
- * Routine: muxSetupUART1 (ostboot)
- * Description: Set up uart1 muxing
- *****************************************/
-void muxSetupUART1(void)
-{
- volatile unsigned char *MuxConfigReg;
-
- /* UART1_CTS pin configuration, PIN = D21 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_CTS;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* UART1_RTS pin configuration, PIN = H21 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_RTS;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* UART1_TX pin configuration, PIN = L20 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_TX;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* UART1_RX pin configuration, PIN = T21 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_RX;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-}
-
-/****************************************
- * Routine: muxSetupLCD (ostboot)
- * Description: Setup lcd muxing
- *****************************************/
-void muxSetupLCD(void)
-{
- volatile unsigned char *MuxConfigReg;
-
- /* LCD_D0 pin configuration, PIN = Y7 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D0;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D1 pin configuration, PIN = P10 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D1;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D2 pin configuration, PIN = V8 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D2;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D3 pin configuration, PIN = Y8 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D3;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D4 pin configuration, PIN = W8 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D4;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D5 pin configuration, PIN = R10 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D5;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D6 pin configuration, PIN = Y9 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D6;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D7 pin configuration, PIN = V9 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D7;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D8 pin configuration, PIN = W9 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D8;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D9 pin configuration, PIN = P11 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D9;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D10 pin configuration, PIN = V10 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D10;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D11 pin configuration, PIN = Y10 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D11;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D12 pin configuration, PIN = W10 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D12;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D13 pin configuration, PIN = R11 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D13;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D14 pin configuration, PIN = V11 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D14;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D15 pin configuration, PIN = W11 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D15;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D16 pin configuration, PIN = P12 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D16;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D17 pin configuration, PIN = R12 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D17;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_PCLK pin configuration, PIN = W6 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_PCLK;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_VSYNC pin configuration, PIN = V7 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_VSYNC;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_HSYNC pin configuration, PIN = Y6 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_HSYNC;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_ACBIAS pin configuration, PIN = W7 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_ACBIAS;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-}
-
-/****************************************
- * Routine: muxSetupCamera (ostboot)
- * Description: Setup camera muxing
- *****************************************/
-void muxSetupCamera(void)
-{
- volatile unsigned char *MuxConfigReg;
-
- /* CAMERA_RSTZ pin configuration, PIN = Y16 */
- /* CAM_RST is connected through the I2C IO expander.*/
- /* MuxConfigReg = (volatile unsigned char *), CONTROL_PADCONF_SYS_NRESWARM*/
- /* *MuxConfigReg = 0x00 ; / * Mode = 0, PUPD=Disabled */
-
- /* CAMERA_XCLK pin configuration, PIN = U3 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_XCLK;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* CAMERA_LCLK pin configuration, PIN = V5 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_LCLK;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* CAMERA_VSYNC pin configuration, PIN = U2 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_VS,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* CAMERA_HSYNC pin configuration, PIN = T3 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_HS,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* CAMERA_DAT0 pin configuration, PIN = T4 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D0,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* CAMERA_DAT1 pin configuration, PIN = V2 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D1,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* CAMERA_DAT2 pin configuration, PIN = V3 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D2,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* CAMERA_DAT3 pin configuration, PIN = U4 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D3,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* CAMERA_DAT4 pin configuration, PIN = W2 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D4,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* CAMERA_DAT5 pin configuration, PIN = V4 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D5,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* CAMERA_DAT6 pin configuration, PIN = W3 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D6,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* CAMERA_DAT7 pin configuration, PIN = Y2 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D7,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* CAMERA_DAT8 pin configuration, PIN = Y4 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D8,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* CAMERA_DAT9 pin configuration, PIN = V6 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D9,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-}
-
-/****************************************
- * Routine: muxSetupMMCSD (ostboot)
- * Description: set up MMC muxing
- *****************************************/
-void muxSetupMMCSD(void)
-{
- volatile unsigned char *MuxConfigReg;
-
- /* SDMMC_CLKI pin configuration, PIN = H15 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CLKI,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* SDMMC_CLKO pin configuration, PIN = G19 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CLKO,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* SDMMC_CMD pin configuration, PIN = H18 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CMD,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
- /* External pull-ups are present. */
- /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
-
- /* SDMMC_DAT0 pin configuration, PIN = F20 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT0,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
- /* External pull-ups are present. */
- /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
-
- /* SDMMC_DAT1 pin configuration, PIN = H14 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT1,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
- /* External pull-ups are present. */
- /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
-
- /* SDMMC_DAT2 pin configuration, PIN = E19 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT2,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
- /* External pull-ups are present. */
- /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
-
- /* SDMMC_DAT3 pin configuration, PIN = D19 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT3,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
- /* External pull-ups are present. */
- /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
-
- /* SDMMC_DDIR0 pin configuration, PIN = F19 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR0,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* SDMMC_DDIR1 pin configuration, PIN = E20 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR1,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* SDMMC_DDIR2 pin configuration, PIN = F18 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR2,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* SDMMC_DDIR3 pin configuration, PIN = E18 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR3,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* SDMMC_CDIR pin configuration, PIN = G18 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CMD_DIR,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* MMC_CD pin configuration, PIN = B3 ---2420IP ONLY---*/
- /* MMC_CD for 2422IP=K1 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SDRC_A14,
- *MuxConfigReg = 0x03 ; /* Mode = 3, PUPD=Disabled */
-
- /* MMC_WP pin configuration, PIN = B4 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SDRC_A13,
- *MuxConfigReg = 0x03 ; /* Mode = 3, PUPD=Disabled */
-}
-
-/******************************************
- * Routine: muxSetupTouchScreen (ostboot)
- * Description: Set up touch screen muxing
- *******************************************/
-void muxSetupTouchScreen(void)
-{
- volatile unsigned char *MuxConfigReg;
-
- /* SPI1_CLK pin configuration, PIN = U18 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_CLK,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* SPI1_MOSI pin configuration, PIN = V20 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_SIMO,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* SPI1_MISO pin configuration, PIN = T18 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_SOMI,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* SPI1_nCS0 pin configuration, PIN = U19 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_NCS0,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* PEN_IRQ pin configuration, PIN = P20 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MCBSP1_FSR,
- *MuxConfigReg = 0x03 ; /* Mode = 3, PUPD=Disabled */
-}
-
-/****************************************
- * Routine: muxSetupHDQ (ostboot)
- * Description: setup 1wire mux
- *****************************************/
-void muxSetupHDQ(void)
-{
- volatile unsigned char *MuxConfigReg;
-
- /* HDQ_SIO pin configuration, PIN = N18 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_HDQ_SIO,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-}
-
-/***************************************************************
- * Routine: muxSetupGPMC (ostboot)
- * Description: Configures balls which cam up in protected mode
- ***************************************************************/
-void muxSetupGPMC(void)
-{
- volatile uint8 *MuxConfigReg;
- volatile unsigned int *MCR = (volatile unsigned int *)0x4800008C;
-
- /* gpmc_io_dir */
- *MCR = 0x19000000;
-
- /* NOR FLASH CS0 */
- /* signal - Gpmc_clk; pin - J4; offset - 0x0088; mode - 0; Byte-3 Pull/up - N/A */
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_D2_BYTE3,
- *MuxConfigReg = 0x00 ;
-
- /* signal - Gpmc_iodir; pin - n2; offset - 0x008C; mode - 1; Byte-3 Pull/up - N/A */
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE3,
- *MuxConfigReg = 0x01 ;
-
- /* MPDB(Multi Port Debug Port) CS1 */
- /* signal - gpmc_ncs1; pin - N8; offset - 0x008C; mode - 0; Byte-1 Pull/up - N/A */
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE1,
- *MuxConfigReg = 0x00 ;
-
- /* signal - Gpmc_ncs2; pin - E2; offset - 0x008C; mode - 0; Byte-2 Pull/up - N/A */
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE2,
- *MuxConfigReg = 0x00 ;
-}
-
-/****************************************************************
- * Routine: muxSetupSDRC (ostboot)
- * Description: Configures balls which come up in protected mode
- ****************************************************************/
-void muxSetupSDRC(void)
-{
- volatile uint8 *MuxConfigReg;
-
- /* signal - sdrc_ncs1; pin - C12; offset - 0x00A0; mode - 0; Byte-1 Pull/up - N/A */
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_NCS0_BYTE1,
- *MuxConfigReg = 0x00 ;
-
- /* signal - sdrc_a12; pin - D11; offset - 0x0030; mode - 0; Byte-2 Pull/up - N/A */
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_A14_BYTE2,
- *MuxConfigReg = 0x00 ;
-
- /* signal - sdrc_cke1; pin - B13; offset - 0x00A0; mode - 0; Byte-3 Pull/up - N/A */
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_NCS0_BYTE3,
- *MuxConfigReg = 0x00;
-
- if (get_cpu_type() == CPU_2422) {
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_A14_BYTE0,
- *MuxConfigReg = 0x1b;
- }
-}
-
-/*****************************************************************************
- * Routine: update_mux()
- * Description: Update balls which are different beween boards. All should be
- * updated to match functionaly. However, I'm only updating ones
- * which I'll be using for now. When power comes into play they
- * all need updating.
- *****************************************************************************/
-void update_mux(u32 btype,u32 mtype)
-{
- u32 cpu, base = OMAP2420_CTRL_BASE;
- cpu = get_cpu_type();
-
- if (btype == BOARD_H4_MENELAUS) {
- if (cpu == CPU_2420) {
- /* PIN = B3, GPIO.0->KBR5, mode 3, (pun?),-DO-*/
- __raw_writeb(0x3, base+0x30);
- /* PIN = B13, GPIO.38->KBC6, mode 3, (pun?)-DO-*/
- __raw_writeb(0x3, base+0xa3);
- /* PIN = F1, GPIO.25->HSUSBxx mode 3, (for external HS USB)*/
- /* PIN = H1, GPIO.26->HSUSBxx mode 3, (for external HS USB)*/
- /* PIN = K1, GPMC_ncs6 mode 0, (on board nand access)*/
- /* PIN = L2, GPMC_ncs67 mode 0, (for external HS USB)*/
- /* PIN = M1 (HSUSBOTG) */
- /* PIN = P1, GPIO.35->MEN_POK mode 3, (menelaus powerok)-DO-*/
- __raw_writeb(0x3, base+0x9d);
- /* PIN = U32, (WLAN_CLKREQ) */
- /* PIN = Y11, WLAN */
- /* PIN = AA4, GPIO.15->KBC2, mode 3, -DO- */
- __raw_writeb(0x3, base+0xe7);
- /* PIN = AA8, mDOC */
- /* PIN = AA10, BT */
- /* PIN = AA13, WLAN */
- /* PIN = M18 GPIO.96->MMC2_WP mode 3 -DO- */
- __raw_writeb(0x3, base+0x10e);
- /* PIN = N19 GPIO.98->WLAN_INT mode 3 -DO- */
- __raw_writeb(0x3, base+0x110);
- /* PIN = J15 HHUSB */
- /* PIN = H19 HSUSB */
- /* PIN = W13, P13, R13, W16 ... */
- /* PIN = V12 GPIO.25->I2C_CAMEN mode 3 -DO- */
- __raw_writeb(0x3, base+0xde);
- /* PIN = W19 sys_nirq->MENELAUS_INT mode 0 -DO- */
- __raw_writeb(0x0, base+0x12c);
- /* PIN = AA17->sys_clkreq mode 0 -DO- */
- __raw_writeb(0x0, base+0x136);
- } else if (cpu == CPU_2422) {
- /* PIN = B3, GPIO.0->nc, mode 3, set above (pun?)*/
- /* PIN = B13, GPIO.cke1->nc, mode 0, set above, (pun?)*/
- /* PIN = F1, GPIO.25->HSUSBxx mode 3, (for external HS USB)*/
- /* PIN = H1, GPIO.26->HSUSBxx mode 3, (for external HS USB)*/
- /* PIN = K1, GPMC_ncs6 mode 0, (on board nand access)*/
- __raw_writeb(0x0, base+0x92);
- /* PIN = L2, GPMC_ncs67 mode 0, (for external HS USB)*/
- /* PIN = M1 (HSUSBOTG) */
- /* PIN = P1, GPIO.35->MEN_POK mode 3, (menelaus powerok)-DO-*/
- __raw_writeb(0x3, base+0x10c);
- /* PIN = U32, (WLAN_CLKREQ) */
- /* PIN = AA4, GPIO.15->KBC2, mode 3, -DO- */
- __raw_writeb(0x3, base+0x30);
- /* PIN = AA8, mDOC */
- /* PIN = AA10, BT */
- /* PIN = AA12, WLAN */
- /* PIN = M18 GPIO.96->MMC2_WP mode 3 -DO- */
- __raw_writeb(0x3, base+0x10e);
- /* PIN = N19 GPIO.98->WLAN_INT mode 3 -DO- */
- __raw_writeb(0x3, base+0x110);
- /* PIN = J15 HHUSB */
- /* PIN = H19 HSUSB */
- /* PIN = W13, P13, R13, W16 ... */
- /* PIN = V12 GPIO.25->I2C_CAMEN mode 3 -DO- */
- __raw_writeb(0x3, base+0xde);
- /* PIN = W19 sys_nirq->MENELAUS_INT mode 0 -DO- */
- __raw_writeb(0x0, base+0x12c);
- /* PIN = AA17->sys_clkreq mode 0 -DO- */
- __raw_writeb(0x0, base+0x136);
- }
-
- } else if (btype == BOARD_H4_SDP) {
- if (cpu == CPU_2420) {
- /* PIN = B3, GPIO.0->nc mode 3, set above (pun?)*/
- /* PIN = B13, GPIO.cke1->nc, mode 0, set above, (pun?)*/
- /* Pin = Y11 VLNQ */
- /* Pin = AA4 VLNQ */
- /* Pin = AA6 VLNQ */
- /* Pin = AA8 VLNQ */
- /* Pin = AA10 VLNQ */
- /* Pin = AA12 VLNQ */
- /* PIN = M18 GPIO.96->KBR5 mode 3 -DO- */
- __raw_writeb(0x3, base+0x10e);
- /* PIN = N19 GPIO.98->KBC6 mode 3 -DO- */
- __raw_writeb(0x3, base+0x110);
- /* PIN = J15 MDOC_nDMAREQ */
- /* PIN = H19 GPIO.100->KBC2 mode 3 -DO- */
- __raw_writeb(0x3, base+0x114);
- /* PIN = W13, V12, P13, R13, W19, W16 ... */
- /* PIN = AA17 sys_clkreq->bt_clk_req mode 0 */
- } else if (cpu == CPU_2422) {
- /* PIN = B3, GPIO.0->MMC_CD, mode 3, set above */
- /* PIN = B13, GPIO.38->wlan_int, mode 3, (pun?)*/
- /* Pin = Y11 VLNQ */
- /* Pin = AA4 VLNQ */
- /* Pin = AA6 VLNQ */
- /* Pin = AA8 VLNQ */
- /* Pin = AA10 VLNQ */
- /* Pin = AA12 VLNQ */
- /* PIN = M18 GPIO.96->KBR5 mode 3 -DO- */
- __raw_writeb(0x3, base+0x10e);
- /* PIN = N19 GPIO.98->KBC6 mode 3 -DO- */
- __raw_writeb(0x3, base+0x110);
- /* PIN = J15 MDOC_nDMAREQ */
- /* PIN = H19 GPIO.100->KBC2 mode 3 -DO- */
- __raw_writeb(0x3, base+0x114);
- /* PIN = W13, V12, P13, R13, W19, W16 ... */
- /* PIN = AA17 sys_clkreq->bt_clk_req mode 0 */
- }
- }
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_LAN91C96
- rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/ti/omap2420h4/sys_info.c b/board/ti/omap2420h4/sys_info.c
deleted file mode 100644
index b12011e..0000000
--- a/board/ti/omap2420h4/sys_info.c
+++ /dev/null
@@ -1,387 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/omap2420.h>
-#include <asm/io.h>
-#include <asm/arch/bits.h>
-#include <asm/arch/mem.h> /* get mem tables */
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/sys_info.h>
-#include <i2c.h>
-
-/**************************************************************************
- * get_prod_id() - get id info from chips
- ***************************************************************************/
-static u32 get_prod_id(void)
-{
- u32 p;
- p = __raw_readl(PRODUCTION_ID); /* get production ID */
- return((p & CPU_242X_PID_MASK) >> 16);
-}
-
-/**************************************************************************
- * get_cpu_type() - low level get cpu type
- * - no C globals yet.
- * - just looking to say if this is a 2422 or 2420 or ...
- * - to start with we will look at switch settings..
- * - 2422 id's same as 2420 for ES1 will rely on H4 board characteristics
- * (mux for 2420, non-mux for 2422).
- ***************************************************************************/
-u32 get_cpu_type(void)
-{
- u32 v;
-
- switch(get_prod_id()){
- case 1:;/* 2420 */
- case 2: return(CPU_2420); break; /* 2420 pop */
- case 4: return(CPU_2422); break;
- case 8: return(CPU_2423); break;
- default: break; /* early 2420/2422's unmarked */
- }
-
- v = __raw_readl(TAP_IDCODE_REG);
- v &= CPU_24XX_ID_MASK;
- if (v == CPU_2420_CHIPID) { /* currently 2420 and 2422 have same id */
- if (is_gpmc_muxed() == GPMC_MUXED) /* if mux'ed */
- return(CPU_2420);
- else
- return(CPU_2422);
- } else
- return(CPU_2420); /* don't know, say 2420 */
-}
-
-/******************************************
- * get_cpu_rev(void) - extract version info
- ******************************************/
-u32 get_cpu_rev(void)
-{
- u32 v;
- v = __raw_readl(TAP_IDCODE_REG);
- v = v >> 28;
- return(v+1); /* currently 2422 and 2420 match up */
-}
-/****************************************************
- * is_mem_sdr() - return 1 if mem type in use is SDR
- ****************************************************/
-u32 is_mem_sdr(void)
-{
- volatile u32 *burst = (volatile u32 *)(SDRC_MR_0+SDRC_CS0_OSET);
- if(*burst == H4_2420_SDRC_MR_0_SDR)
- return(1);
- return(0);
-}
-
-/***********************************************************
- * get_mem_type() - identify type of mDDR part used.
- * 2422 uses stacked DDR, 2 parts CS0/CS1.
- * 2420 may have 1 or 2, no good way to know...only init 1...
- * when eeprom data is up we can select 1 more.
- *************************************************************/
-u32 get_mem_type(void)
-{
- u32 cpu, sdr = is_mem_sdr();
-
- cpu = get_cpu_type();
- if (cpu == CPU_2422 || cpu == CPU_2423)
- return(DDR_STACKED);
-
- if(get_prod_id() == 0x2)
- return(XDR_POP);
-
- if (get_board_type() == BOARD_H4_MENELAUS)
- if(sdr)
- return(SDR_DISCRETE);
- else
- return(DDR_COMBO);
- else
- if(sdr) /* SDP + SDR kit */
- return(SDR_DISCRETE);
- else
- return(DDR_DISCRETE); /* origional SDP */
-}
-
-/***********************************************************************
- * get_cs0_size() - get size of chip select 0/1
- ************************************************************************/
-u32 get_sdr_cs_size(u32 offset)
-{
- u32 size;
- size = __raw_readl(SDRC_MCFG_0+offset) >> 8; /* get ram size field */
- size &= 0x2FF; /* remove unwanted bits */
- size *= SZ_2M; /* find size in MB */
- return(size);
-}
-
-/***********************************************************************
- * get_board_type() - get board type based on current production stats.
- * --- NOTE: 2 I2C EEPROMs will someday be populated with proper info.
- * when they are available we can get info from there. This should
- * be correct of all known boards up until today.
- ************************************************************************/
-u32 get_board_type(void)
-{
- if (i2c_probe(I2C_MENELAUS) == 0)
- return(BOARD_H4_MENELAUS);
- else
- return(BOARD_H4_SDP);
-}
-
-/******************************************************************
- * get_sysboot_value() - get init word settings (dip switch on h4)
- ******************************************************************/
-inline u32 get_sysboot_value(void)
-{
- return(0x00000FFF & __raw_readl(CONTROL_STATUS));
-}
-
-/***************************************************************************
- * get_gpmc0_base() - Return current address hardware will be
- * fetching from. The below effectively gives what is correct, its a bit
- * mis-leading compared to the TRM. For the most general case the mask
- * needs to be also taken into account this does work in practice.
- * - for u-boot we currently map:
- * -- 0 to nothing,
- * -- 4 to flash
- * -- 8 to enent
- * -- c to wifi
- ****************************************************************************/
-u32 get_gpmc0_base(void)
-{
- u32 b;
-
- b = __raw_readl(GPMC_CONFIG7_0);
- b &= 0x1F; /* keep base [5:0] */
- b = b << 24; /* ret 0x0b000000 */
- return(b);
-}
-
-/*****************************************************************
- * is_gpmc_muxed() - tells if address/data lines are multiplexed
- *****************************************************************/
-u32 is_gpmc_muxed(void)
-{
- u32 mux;
- mux = get_sysboot_value();
- if ((mux & (BIT0 | BIT1 | BIT2 | BIT3)) == (BIT0 | BIT2 | BIT3))
- return(GPMC_MUXED); /* NAND Boot mode */
- if (mux & BIT1) /* if mux'ed */
- return(GPMC_MUXED);
- else
- return(GPMC_NONMUXED);
-}
-
-/************************************************************************
- * get_gpmc0_type() - read sysboot lines to see type of memory attached
- ************************************************************************/
-u32 get_gpmc0_type(void)
-{
- u32 type;
- type = get_sysboot_value();
- if ((type & (BIT3|BIT2)) == (BIT3|BIT2))
- return(TYPE_NAND);
- else
- return(TYPE_NOR);
-}
-
-/*******************************************************************
- * get_gpmc0_width() - See if bus is in x8 or x16 (mainly for nand)
- *******************************************************************/
-u32 get_gpmc0_width(void)
-{
- u32 width;
- width = get_sysboot_value();
- if ((width & 0xF) == (BIT3|BIT2))
- return(WIDTH_8BIT);
- else
- return(WIDTH_16BIT);
-}
-
-/*********************************************************************
- * wait_on_value() - common routine to allow waiting for changes in
- * volatile regs.
- *********************************************************************/
-u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound)
-{
- u32 i = 0, val;
- do {
- ++i;
- val = __raw_readl(read_addr) & read_bit_mask;
- if (val == match_value)
- return(1);
- if (i==bound)
- return(0);
- } while (1);
-}
-
-/*********************************************************************
- * display_board_info() - print banner with board info.
- *********************************************************************/
-void display_board_info(u32 btype)
-{
- static const char cpu_2420 [] = "2420"; /* cpu type */
- static const char cpu_2422 [] = "2422";
- static const char cpu_2423 [] = "2423";
- static const char db_men [] = "Menelaus"; /* board type */
- static const char db_ip [] = "IP";
- static const char mem_sdr [] = "mSDR"; /* memory type */
- static const char mem_ddr [] = "mDDR";
- static const char t_tst [] = "TST"; /* security level */
- static const char t_emu [] = "EMU";
- static const char t_hs [] = "HS";
- static const char t_gp [] = "GP";
- static const char unk [] = "?";
-
- const char *cpu_s, *db_s, *mem_s, *sec_s;
- u32 cpu, rev, sec;
-
- rev = get_cpu_rev();
- cpu = get_cpu_type();
- sec = get_device_type();
-
- if(is_mem_sdr())
- mem_s = mem_sdr;
- else
- mem_s = mem_ddr;
-
- if(cpu == CPU_2423)
- cpu_s = cpu_2423;
- else if (cpu == CPU_2422)
- cpu_s = cpu_2422;
- else
- cpu_s = cpu_2420;
-
- if(btype == BOARD_H4_MENELAUS)
- db_s = db_men;
- else
- db_s = db_ip;
-
- switch(sec){
- case TST_DEVICE: sec_s = t_tst; break;
- case EMU_DEVICE: sec_s = t_emu; break;
- case HS_DEVICE: sec_s = t_hs; break;
- case GP_DEVICE: sec_s = t_gp; break;
- default: sec_s = unk;
- }
-
- printf("OMAP%s-%s revision %d\n", cpu_s, sec_s, rev-1);
- printf("TI H4 SDP Base Board + %s Daughter Board + %s \n", db_s, mem_s);
-}
-
-/*************************************************************************
- * get_board_rev() - setup to pass kernel board revision information
- * 0 = 242x IP platform (first 2xx boards)
- * 1 = 242x Menelaus platfrom.
- *************************************************************************/
-u32 get_board_rev(void)
-{
- u32 rev = 0;
- u32 btype = get_board_type();
-
- if (btype == BOARD_H4_MENELAUS){
- rev = 1;
- }
- return(rev);
-}
-
-/********************************************************
- * get_base(); get upper addr of current execution
- *******************************************************/
-u32 get_base(void)
-{
- u32 val;
- __asm__ __volatile__("mov %0, pc \n" : "=r" (val) : : "memory");
- val &= 0xF0000000;
- val >>= 28;
- return(val);
-}
-
-/********************************************************
- * get_base2(); get 2upper addr of current execution
- *******************************************************/
-u32 get_base2(void)
-{
- u32 val;
- __asm__ __volatile__("mov %0, pc \n" : "=r" (val) : : "memory");
- val &= 0xFF000000;
- val >>= 24;
- return(val);
-}
-
-/********************************************************
- * running_in_flash() - tell if currently running in
- * flash.
- *******************************************************/
-u32 running_in_flash(void)
-{
- if (get_base() < 4)
- return(1); /* in flash */
- return(0); /* running in SRAM or SDRAM */
-}
-
-/********************************************************
- * running_in_sram() - tell if currently running in
- * sram.
- *******************************************************/
-u32 running_in_sram(void)
-{
- if (get_base() == 4)
- return(1); /* in SRAM */
- return(0); /* running in FLASH or SDRAM */
-}
-/********************************************************
- * running_in_sdram() - tell if currently running in
- * flash.
- *******************************************************/
-u32 running_in_sdram(void)
-{
- if (get_base() > 4)
- return(1); /* in sdram */
- return(0); /* running in SRAM or FLASH */
-}
-
-/*************************************************************
- * running_from_internal_boot() - am I a signed NOR image.
- *************************************************************/
-u32 running_from_internal_boot(void)
-{
- u32 v, base;
-
- v = get_sysboot_value() & BIT3;
- base = get_base2();
- /* if running at mask rom flash address and
- * sysboot3 says this was an internal boot
- */
- if ((base == 0x08) && v)
- return(1);
- else
- return(0);
-}
-
-/*************************************************************
- * get_device_type(): tell if GP/HS/EMU/TST
- *************************************************************/
-u32 get_device_type(void)
-{
- int mode;
- mode = __raw_readl(CONTROL_STATUS) & (BIT10|BIT9|BIT8);
- return(mode >>= 8);
-}
diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c
index 55337c0..90046e8 100644
--- a/board/ti/omap5_uevm/evm.c
+++ b/board/ti/omap5_uevm/evm.c
@@ -23,7 +23,7 @@
* MA 02111-1307 USA
*/
#include <common.h>
-#include <twl6035.h>
+#include <palmas.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/mmc_host_def.h>
@@ -63,30 +63,34 @@
*/
int misc_init_r(void)
{
-#ifdef CONFIG_TWL6035_POWER
- twl6035_init_settings();
+#ifdef CONFIG_PALMAS_POWER
+ palmas_init_settings();
#endif
return 0;
}
void set_muxconf_regs_essential(void)
{
- do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_essential,
+ do_set_mux((*ctrl)->control_padconf_core_base,
+ core_padconf_array_essential,
sizeof(core_padconf_array_essential) /
sizeof(struct pad_conf_entry));
- do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_essential,
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
+ wkup_padconf_array_essential,
sizeof(wkup_padconf_array_essential) /
sizeof(struct pad_conf_entry));
}
void set_muxconf_regs_non_essential(void)
{
- do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_non_essential,
+ do_set_mux((*ctrl)->control_padconf_core_base,
+ core_padconf_array_non_essential,
sizeof(core_padconf_array_non_essential) /
sizeof(struct pad_conf_entry));
- do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_non_essential,
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
+ wkup_padconf_array_non_essential,
sizeof(wkup_padconf_array_non_essential) /
sizeof(struct pad_conf_entry));
}
diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c
index cab0598..90ae29e 100644
--- a/board/ti/panda/panda.c
+++ b/board/ti/panda/panda.c
@@ -24,7 +24,7 @@
#include <common.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
#include <asm/arch/gpio.h>
#include <asm/gpio.h>
@@ -82,6 +82,12 @@
if (omap_revision() == OMAP4430_ES1_0)
return 0;
+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+ if (omap_revision() >= OMAP4460_ES1_0 ||
+ omap_revision() <= OMAP4460_ES1_1)
+ setenv("board_name", strcat(CONFIG_SYS_BOARD, "-es"));
+#endif
+
gpio_direction_input(PANDA_ULPI_PHY_TYPE_GPIO);
phy_type = gpio_get_value(PANDA_ULPI_PHY_TYPE_GPIO);
@@ -133,16 +139,18 @@
void set_muxconf_regs_essential(void)
{
- do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_essential,
+ do_set_mux((*ctrl)->control_padconf_core_base,
+ core_padconf_array_essential,
sizeof(core_padconf_array_essential) /
sizeof(struct pad_conf_entry));
- do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_essential,
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
+ wkup_padconf_array_essential,
sizeof(wkup_padconf_array_essential) /
sizeof(struct pad_conf_entry));
if (omap_revision() >= OMAP4460_ES1_0)
- do_set_mux(CONTROL_PADCONF_WKUP,
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
wkup_padconf_array_essential_4460,
sizeof(wkup_padconf_array_essential_4460) /
sizeof(struct pad_conf_entry));
@@ -150,27 +158,29 @@
void set_muxconf_regs_non_essential(void)
{
- do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_non_essential,
+ do_set_mux((*ctrl)->control_padconf_core_base,
+ core_padconf_array_non_essential,
sizeof(core_padconf_array_non_essential) /
sizeof(struct pad_conf_entry));
if (omap_revision() < OMAP4460_ES1_0)
- do_set_mux(CONTROL_PADCONF_CORE,
+ do_set_mux((*ctrl)->control_padconf_core_base,
core_padconf_array_non_essential_4430,
sizeof(core_padconf_array_non_essential_4430) /
sizeof(struct pad_conf_entry));
else
- do_set_mux(CONTROL_PADCONF_CORE,
+ do_set_mux((*ctrl)->control_padconf_core_base,
core_padconf_array_non_essential_4460,
sizeof(core_padconf_array_non_essential_4460) /
sizeof(struct pad_conf_entry));
- do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_non_essential,
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
+ wkup_padconf_array_non_essential,
sizeof(wkup_padconf_array_non_essential) /
sizeof(struct pad_conf_entry));
if (omap_revision() < OMAP4460_ES1_0)
- do_set_mux(CONTROL_PADCONF_WKUP,
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
wkup_padconf_array_non_essential_4430,
sizeof(wkup_padconf_array_non_essential_4430) /
sizeof(struct pad_conf_entry));
diff --git a/board/ti/sdp4430/sdp.c b/board/ti/sdp4430/sdp.c
index 4c1a4f7..5dd1ba3 100644
--- a/board/ti/sdp4430/sdp.c
+++ b/board/ti/sdp4430/sdp.c
@@ -72,16 +72,18 @@
void set_muxconf_regs_essential(void)
{
- do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_essential,
+ do_set_mux((*ctrl)->control_padconf_core_base,
+ core_padconf_array_essential,
sizeof(core_padconf_array_essential) /
sizeof(struct pad_conf_entry));
- do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_essential,
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
+ wkup_padconf_array_essential,
sizeof(wkup_padconf_array_essential) /
sizeof(struct pad_conf_entry));
if (omap_revision() >= OMAP4460_ES1_0)
- do_set_mux(CONTROL_PADCONF_WKUP,
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
wkup_padconf_array_essential_4460,
sizeof(wkup_padconf_array_essential_4460) /
sizeof(struct pad_conf_entry));
@@ -89,16 +91,18 @@
void set_muxconf_regs_non_essential(void)
{
- do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_non_essential,
+ do_set_mux((*ctrl)->control_padconf_core_base,
+ core_padconf_array_non_essential,
sizeof(core_padconf_array_non_essential) /
sizeof(struct pad_conf_entry));
- do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_non_essential,
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
+ wkup_padconf_array_non_essential,
sizeof(wkup_padconf_array_non_essential) /
sizeof(struct pad_conf_entry));
if (omap_revision() < OMAP4460_ES1_0) {
- do_set_mux(CONTROL_PADCONF_WKUP,
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
wkup_padconf_array_non_essential_4430,
sizeof(wkup_padconf_array_non_essential_4430) /
sizeof(struct pad_conf_entry));
diff --git a/board/ti/ti814x/evm.c b/board/ti/ti814x/evm.c
index 446e36b..4759b16 100644
--- a/board/ti/ti814x/evm.c
+++ b/board/ti/ti814x/evm.c
@@ -17,6 +17,7 @@
*/
#include <common.h>
+#include <cpsw.h>
#include <errno.h>
#include <spl.h>
#include <asm/arch/cpu.h>
@@ -39,6 +40,8 @@
static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
#endif
+static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
/* UART Defines */
#ifdef CONFIG_SPL_BUILD
#define UART_RESET (0x1 << 1)
@@ -146,11 +149,23 @@
void s_init(void)
{
#ifdef CONFIG_SPL_BUILD
+ /*
+ * Save the boot parameters passed from romcode.
+ * We cannot delay the saving further than this,
+ * to prevent overwrites.
+ */
+#ifdef CONFIG_SPL_BUILD
+ save_omap_boot_params();
+#endif
+
/* WDT1 is already running when the bootloader gets control
* Disable it to avoid "random" resets
*/
wdt_disable();
+ /* Enable timer */
+ timer_init();
+
/* Setup the PLLs and the clocks for the peripherals */
pll_init();
@@ -163,6 +178,9 @@
/* Set MMC pins */
enable_mmc1_pin_mux();
+ /* Set Ethernet pins */
+ enable_enet_pin_mux();
+
/* Enable UART */
uart_enable();
@@ -196,3 +214,69 @@
return 0;
}
#endif
+
+#ifdef CONFIG_DRIVER_TI_CPSW
+static void cpsw_control(int enabled)
+{
+ /* VTP can be added here */
+
+ return;
+}
+
+static struct cpsw_slave_data cpsw_slaves[] = {
+ {
+ .slave_reg_ofs = 0x50,
+ .sliver_reg_ofs = 0x700,
+ .phy_id = 1,
+ },
+ {
+ .slave_reg_ofs = 0x90,
+ .sliver_reg_ofs = 0x740,
+ .phy_id = 0,
+ },
+};
+
+static struct cpsw_platform_data cpsw_data = {
+ .mdio_base = CPSW_MDIO_BASE,
+ .cpsw_base = CPSW_BASE,
+ .mdio_div = 0xff,
+ .channels = 8,
+ .cpdma_reg_ofs = 0x100,
+ .slaves = 1,
+ .slave_data = cpsw_slaves,
+ .ale_reg_ofs = 0x600,
+ .ale_entries = 1024,
+ .host_port_reg_ofs = 0x28,
+ .hw_stats_reg_ofs = 0x400,
+ .mac_control = (1 << 5),
+ .control = cpsw_control,
+ .host_port_num = 0,
+ .version = CPSW_CTRL_VERSION_1,
+};
+#endif
+
+int board_eth_init(bd_t *bis)
+{
+ uint8_t mac_addr[6];
+ uint32_t mac_hi, mac_lo;
+
+ if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
+ printf("<ethaddr> not set. Reading from E-fuse\n");
+ /* try reading mac address from efuse */
+ mac_lo = readl(&cdev->macid0l);
+ mac_hi = readl(&cdev->macid0h);
+ mac_addr[0] = mac_hi & 0xFF;
+ mac_addr[1] = (mac_hi & 0xFF00) >> 8;
+ mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
+ mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
+ mac_addr[4] = mac_lo & 0xFF;
+ mac_addr[5] = (mac_lo & 0xFF00) >> 8;
+
+ if (is_valid_ether_addr(mac_addr))
+ eth_setenv_enetaddr("ethaddr", mac_addr);
+ else
+ printf("Unable to read MAC address. Set <ethaddr>\n");
+ }
+
+ return cpsw_register(&cpsw_data);
+}
diff --git a/board/ti/ti814x/evm.h b/board/ti/ti814x/evm.h
index 40f8710..6aebec6 100644
--- a/board/ti/ti814x/evm.h
+++ b/board/ti/ti814x/evm.h
@@ -3,5 +3,6 @@
void enable_uart0_pin_mux(void);
void enable_mmc1_pin_mux(void);
+void enable_enet_pin_mux(void);
#endif /* _EVM_H */
diff --git a/board/ti/ti814x/mux.c b/board/ti/ti814x/mux.c
index 137acb4..fd9f364 100644
--- a/board/ti/ti814x/mux.c
+++ b/board/ti/ti814x/mux.c
@@ -40,6 +40,36 @@
{-1},
};
+static struct module_pin_mux enet_pin_mux[] = {
+ {OFFSET(pincntl232), MODE(0x01)}, /* EMAC_RMREFCLK */
+ {OFFSET(pincntl233), PULLUP_EN | MODE(0x01)}, /* MDCLK */
+ {OFFSET(pincntl234), PULLUP_EN | MODE(0x01)}, /* MDIO */
+ {OFFSET(pincntl235), MODE(0x01)}, /* EMAC[0]_MTCLK */
+ {OFFSET(pincntl236), MODE(0x01)}, /* EMAC[0]_MCOL */
+ {OFFSET(pincntl237), MODE(0x01)}, /* EMAC[0]_MCRS */
+ {OFFSET(pincntl238), MODE(0x01)}, /* EMAC[0]_MRXER */
+ {OFFSET(pincntl239), MODE(0x01)}, /* EMAC[0]_MRCLK */
+ {OFFSET(pincntl240), MODE(0x01)}, /* EMAC[0]_MRXD[0] */
+ {OFFSET(pincntl241), MODE(0x01)}, /* EMAC[0]_MRXD[1] */
+ {OFFSET(pincntl242), MODE(0x01)}, /* EMAC[0]_MRXD[2] */
+ {OFFSET(pincntl243), MODE(0x01)}, /* EMAC[0]_MRXD[3] */
+ {OFFSET(pincntl244), MODE(0x01)}, /* EMAC[0]_MRXD[4] */
+ {OFFSET(pincntl245), MODE(0x01)}, /* EMAC[0]_MRXD[5] */
+ {OFFSET(pincntl246), MODE(0x01)}, /* EMAC[0]_MRXD[6] */
+ {OFFSET(pincntl247), MODE(0x01)}, /* EMAC[0]_MRXD[7] */
+ {OFFSET(pincntl248), MODE(0x01)}, /* EMAC[0]_MRXDV */
+ {OFFSET(pincntl249), MODE(0x01)}, /* EMAC[0]_GMTCLK */
+ {OFFSET(pincntl250), MODE(0x01)}, /* EMAC[0]_MTXD[0] */
+ {OFFSET(pincntl251), MODE(0x01)}, /* EMAC[0]_MTXD[1] */
+ {OFFSET(pincntl252), MODE(0x01)}, /* EMAC[0]_MTXD[2] */
+ {OFFSET(pincntl253), MODE(0x01)}, /* EMAC[0]_MTXD[3] */
+ {OFFSET(pincntl254), MODE(0x01)}, /* EMAC[0]_MTXD[4] */
+ {OFFSET(pincntl255), MODE(0x01)}, /* EMAC[0]_MTXD[5] */
+ {OFFSET(pincntl256), MODE(0x01)}, /* EMAC[0]_MTXD[6] */
+ {OFFSET(pincntl257), MODE(0x01)}, /* EMAC[0]_MTXD[7] */
+ {OFFSET(pincntl258), MODE(0x01)}, /* EMAC[0]_MTXEN */
+};
+
void enable_uart0_pin_mux(void)
{
configure_module_pin_mux(uart0_pin_mux);
@@ -49,3 +79,8 @@
{
configure_module_pin_mux(mmc1_pin_mux);
}
+
+void enable_enet_pin_mux(void)
+{
+ configure_module_pin_mux(enet_pin_mux);
+}
diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c
index a471fec..9cc758a 100644
--- a/board/ttcontrol/vision2/vision2.c
+++ b/board/ttcontrol/vision2/vision2.c
@@ -26,10 +26,9 @@
#include <common.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
-#include <asm/arch/mx5x_pins.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/clock.h>
-#include <asm/arch/iomux.h>
+#include <asm/arch/iomux-mx51.h>
#include <asm/gpio.h>
#include <asm/arch/sys_proto.h>
#include <i2c.h>
@@ -68,85 +67,67 @@
int val;
/* toggle watchdog trigger pin */
- val = gpio_get_value(66);
+ val = gpio_get_value(IMX_GPIO_NR(3, 2));
val = val ? 0 : 1;
- gpio_set_value(66, val);
+ gpio_set_value(IMX_GPIO_NR(3, 2), val);
}
#endif
static void init_drive_strength(void)
{
- mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEDDR, PAD_CTL_DDR_INPUT_CMOS);
- mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEADDR, PAD_CTL_PKE_ENABLE);
- mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRAPKS, PAD_CTL_PUE_KEEPER);
- mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRAPUS, PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_A1, PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_A0, PAD_CTL_DRV_HIGH);
- mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_A1, PAD_CTL_DRV_HIGH);
- mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_RAS,
- PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CAS,
- PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEDDR, PAD_CTL_PKE_ENABLE);
- mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRPKS, PAD_CTL_PUE_KEEPER);
- mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR0, PAD_CTL_HYS_NONE);
- mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR1, PAD_CTL_HYS_NONE);
- mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR2, PAD_CTL_HYS_NONE);
- mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR3, PAD_CTL_HYS_NONE);
- mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B0, PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B1, PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B2, PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B4, PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRPUS, PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX51_PIN_CTL_GRP_INMODE1, PAD_CTL_DDR_INPUT_CMOS);
- mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B0, PAD_CTL_DRV_MEDIUM);
- mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B1, PAD_CTL_DRV_MEDIUM);
- mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B2, PAD_CTL_DRV_MEDIUM);
- mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B4, PAD_CTL_DRV_MEDIUM);
+ static const iomux_v3_cfg_t ddr_pads[] = {
+ NEW_PAD_CTRL(MX51_GRP_PKEDDR, 0),
+ NEW_PAD_CTRL(MX51_GRP_PKEADDR, PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX51_GRP_DDRAPKS, 0),
+ NEW_PAD_CTRL(MX51_GRP_DDRAPUS, PAD_CTL_PUS_100K_UP),
+ NEW_PAD_CTRL(MX51_GRP_DDR_SR_A1, PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_GRP_DDR_A0, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX51_GRP_DDR_A1, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX51_PAD_DRAM_RAS__DRAM_RAS,
+ PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_DRAM_CAS__DRAM_CAS,
+ PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_GRP_PKEDDR, PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX51_GRP_DDRPKS, 0),
+ NEW_PAD_CTRL(MX51_GRP_HYSDDR0, 0),
+ NEW_PAD_CTRL(MX51_GRP_HYSDDR1, 0),
+ NEW_PAD_CTRL(MX51_GRP_HYSDDR2, 0),
+ NEW_PAD_CTRL(MX51_GRP_HYSDDR3, 0),
+ NEW_PAD_CTRL(MX51_GRP_DRAM_SR_B0, PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_GRP_DRAM_SR_B1, PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_GRP_DRAM_SR_B2, PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_GRP_DRAM_SR_B4, PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_GRP_DDRPUS, PAD_CTL_PUS_100K_UP),
+ NEW_PAD_CTRL(MX51_GRP_INMODE1, 0),
+ NEW_PAD_CTRL(MX51_GRP_DRAM_B0, PAD_CTL_DSE_MED),
+ NEW_PAD_CTRL(MX51_GRP_DRAM_B1, PAD_CTL_DSE_MED),
+ NEW_PAD_CTRL(MX51_GRP_DRAM_B2, PAD_CTL_DSE_MED),
+ NEW_PAD_CTRL(MX51_GRP_DRAM_B4, PAD_CTL_DSE_MED),
- /* Setting pad options */
- mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDWE,
- PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
- PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCKE0,
- PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
- PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCKE1,
- PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
- PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCLK,
- PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
- PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS0,
- PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
- PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS1,
- PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
- PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS2,
- PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
- PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS3,
- PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
- PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CS0,
- PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
- PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CS1,
- PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
- PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM0,
- PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
- PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM1,
- PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
- PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM2,
- PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
- PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM3,
- PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
- PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+ NEW_PAD_CTRL(MX51_PAD_DRAM_SDWE__DRAM_SDWE, MX51_GPIO_PAD_CTRL),
+ NEW_PAD_CTRL(MX51_PAD_DRAM_SDCKE0__DRAM_SDCKE0,
+ MX51_GPIO_PAD_CTRL),
+ NEW_PAD_CTRL(MX51_PAD_DRAM_SDCKE1__DRAM_SDCKE1,
+ MX51_GPIO_PAD_CTRL),
+ NEW_PAD_CTRL(MX51_PAD_DRAM_SDCLK__DRAM_SDCLK,
+ MX51_GPIO_PAD_CTRL),
+ NEW_PAD_CTRL(MX51_PAD_DRAM_SDQS0__DRAM_SDQS0,
+ MX51_GPIO_PAD_CTRL),
+ NEW_PAD_CTRL(MX51_PAD_DRAM_SDQS1__DRAM_SDQS1,
+ MX51_GPIO_PAD_CTRL),
+ NEW_PAD_CTRL(MX51_PAD_DRAM_SDQS2__DRAM_SDQS2,
+ MX51_GPIO_PAD_CTRL),
+ NEW_PAD_CTRL(MX51_PAD_DRAM_SDQS3__DRAM_SDQS3,
+ MX51_GPIO_PAD_CTRL),
+ NEW_PAD_CTRL(MX51_PAD_DRAM_CS0__DRAM_CS0, MX51_GPIO_PAD_CTRL),
+ NEW_PAD_CTRL(MX51_PAD_DRAM_CS1__DRAM_CS1, MX51_GPIO_PAD_CTRL),
+ NEW_PAD_CTRL(MX51_PAD_DRAM_DQM0__DRAM_DQM0, MX51_GPIO_PAD_CTRL),
+ NEW_PAD_CTRL(MX51_PAD_DRAM_DQM1__DRAM_DQM1, MX51_GPIO_PAD_CTRL),
+ NEW_PAD_CTRL(MX51_PAD_DRAM_DQM2__DRAM_DQM2, MX51_GPIO_PAD_CTRL),
+ NEW_PAD_CTRL(MX51_PAD_DRAM_DQM3__DRAM_DQM3, MX51_GPIO_PAD_CTRL),
+ };
+
+ imx_iomux_v3_setup_multiple_pads(ddr_pads, ARRAY_SIZE(ddr_pads));
}
int dram_init(void)
@@ -170,134 +151,102 @@
static void setup_uart(void)
{
- unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
- PAD_CTL_PUE_PULL | PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST;
- /* console RX on Pin EIM_D25 */
- mxc_request_iomux(MX51_PIN_EIM_D25, IOMUX_CONFIG_ALT3);
- mxc_iomux_set_pad(MX51_PIN_EIM_D25, pad);
- /* console TX on Pin EIM_D26 */
- mxc_request_iomux(MX51_PIN_EIM_D26, IOMUX_CONFIG_ALT3);
- mxc_iomux_set_pad(MX51_PIN_EIM_D26, pad);
+ static const iomux_v3_cfg_t uart_pads[] = {
+ MX51_PAD_EIM_D25__UART3_RXD, /* console RX */
+ MX51_PAD_EIM_D26__UART3_TXD, /* console TX */
+ };
+
+ imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
}
#ifdef CONFIG_MXC_SPI
void spi_io_init(void)
{
- /* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */
- mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ static const iomux_v3_cfg_t spi_pads[] = {
+ NEW_PAD_CTRL(MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI, PAD_CTL_HYS |
+ PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_CSPI1_MISO__ECSPI1_MISO, PAD_CTL_HYS |
+ PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_CSPI1_SS0__ECSPI1_SS0, PAD_CTL_HYS |
+ PAD_CTL_PKE | PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_CSPI1_SS1__ECSPI1_SS1, PAD_CTL_HYS |
+ PAD_CTL_PKE | PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_DI1_PIN11__ECSPI1_SS2, PAD_CTL_HYS |
+ PAD_CTL_PKE | PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, PAD_CTL_HYS |
+ PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST),
+ };
- /* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */
- mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-
- /* 000: Select mux mode: ALT0 mux port: SS0 of instance: ecspi1. */
- mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_CSPI1_SS0,
- PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
- PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-
- /*
- * SS1 will be used as GPIO because of uninterrupted
- * long SPI transmissions (GPIO4_25)
- */
- mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT3);
- mxc_iomux_set_pad(MX51_PIN_CSPI1_SS1,
- PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
- PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-
- /* 000: Select mux mode: ALT0 mux port: SS2 of instance: ecspi1. */
- mxc_request_iomux(MX51_PIN_DI1_PIN11, IOMUX_CONFIG_ALT7);
- mxc_iomux_set_pad(MX51_PIN_DI1_PIN11,
- PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
- PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-
- /* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */
- mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ imx_iomux_v3_setup_multiple_pads(spi_pads, ARRAY_SIZE(spi_pads));
}
static void reset_peripherals(int reset)
{
+#ifdef CONFIG_VISION2_HW_1_0
+ static const iomux_v3_cfg_t fec_cfg_pads[] = {
+ /* RXD1 */
+ NEW_PAD_CTRL(MX51_PAD_EIM_EB3__GPIO2_23, NO_PAD_CTRL),
+ /* RXD2 */
+ NEW_PAD_CTRL(MX51_PAD_EIM_CS2__GPIO2_27, NO_PAD_CTRL),
+ /* RXD3 */
+ NEW_PAD_CTRL(MX51_PAD_EIM_CS3__GPIO2_28, NO_PAD_CTRL),
+ /* RXER */
+ NEW_PAD_CTRL(MX51_PAD_EIM_CS4__GPIO2_29, NO_PAD_CTRL),
+ /* COL */
+ NEW_PAD_CTRL(MX51_PAD_NANDF_RB2__GPIO3_10, NO_PAD_CTRL),
+ /* RCLK */
+ NEW_PAD_CTRL(MX51_PAD_NANDF_RB3__GPIO3_11, NO_PAD_CTRL),
+ /* RXD0 */
+ NEW_PAD_CTRL(MX51_PAD_NANDF_D9__GPIO3_31, NO_PAD_CTRL),
+ };
+
+ static const iomux_v3_cfg_t fec_pads[] = {
+ NEW_PAD_CTRL(MX51_PAD_EIM_CS3__FEC_RDATA3, MX51_PAD_CTRL_2),
+ NEW_PAD_CTRL(MX51_PAD_EIM_CS2__FEC_RDATA2, MX51_PAD_CTRL_2),
+ NEW_PAD_CTRL(MX51_PAD_EIM_EB3__FEC_RDATA1, MX51_PAD_CTRL_2),
+ MX51_PAD_NANDF_D9__FEC_RDATA0,
+ NEW_PAD_CTRL(MX51_PAD_NANDF_RB3__FEC_RX_CLK, MX51_PAD_CTRL_4),
+ MX51_PAD_EIM_CS4__FEC_RX_ER,
+ NEW_PAD_CTRL(MX51_PAD_NANDF_RB2__FEC_COL, MX51_PAD_CTRL_4),
+ };
+#endif
+
if (reset) {
/* reset_n is on NANDF_D15 */
- gpio_direction_output(89, 0);
+ gpio_direction_output(IMX_GPIO_NR(3, 25), 0);
#ifdef CONFIG_VISION2_HW_1_0
/*
* set FEC Configuration lines
* set levels of FEC config lines
*/
- gpio_direction_output(75, 0);
- gpio_direction_output(74, 1);
- gpio_direction_output(95, 1);
+ gpio_direction_output(IMX_GPIO_NR(3, 11), 0);
+ gpio_direction_output(IMX_GPIO_NR(3, 10), 1);
+ gpio_direction_output(IMX_GPIO_NR(3, 31), 1);
/* set direction of FEC config lines */
- gpio_direction_output(59, 0);
- gpio_direction_output(60, 0);
- gpio_direction_output(61, 0);
- gpio_direction_output(55, 1);
+ gpio_direction_output(IMX_GPIO_NR(2, 27), 0);
+ gpio_direction_output(IMX_GPIO_NR(2, 28), 0);
+ gpio_direction_output(IMX_GPIO_NR(2, 29), 0);
+ gpio_direction_output(IMX_GPIO_NR(2, 23), 1);
- /* FEC_RXD1 - sel GPIO (2-23) for configuration -> 1 */
- mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT1);
- /* FEC_RXD2 - sel GPIO (2-27) for configuration -> 0 */
- mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT1);
- /* FEC_RXD3 - sel GPIO (2-28) for configuration -> 0 */
- mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT1);
- /* FEC_RXER - sel GPIO (2-29) for configuration -> 0 */
- mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT1);
- /* FEC_COL - sel GPIO (3-10) for configuration -> 1 */
- mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT3);
- /* FEC_RCLK - sel GPIO (3-11) for configuration -> 0 */
- mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT3);
- /* FEC_RXD0 - sel GPIO (3-31) for configuration -> 1 */
- mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT3);
+ imx_iomux_v3_setup_multiple_pads(fec_cfg_pads,
+ ARRAY_SIZE(fec_cfg_pads));
#endif
- /*
- * activate reset_n pin
- * Select mux mode: ALT3 mux port: NAND D15
- */
- mxc_request_iomux(MX51_PIN_NANDF_D15, IOMUX_CONFIG_ALT3);
- mxc_iomux_set_pad(MX51_PIN_NANDF_D15,
- PAD_CTL_DRV_VOT_HIGH | PAD_CTL_DRV_MAX);
+ /* activate reset_n pin */
+ imx_iomux_v3_setup_pad(
+ NEW_PAD_CTRL(MX51_PAD_NANDF_D15__GPIO3_25,
+ PAD_CTL_DSE_MAX));
} else {
/* set FEC Control lines */
- gpio_direction_input(89);
+ gpio_direction_input(IMX_GPIO_NR(3, 25));
udelay(500);
#ifdef CONFIG_VISION2_HW_1_0
- /* FEC RDATA[3] */
- mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3);
- mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180);
-
- /* FEC RDATA[2] */
- mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3);
- mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180);
-
- /* FEC RDATA[1] */
- mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3);
- mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180);
-
- /* FEC RDATA[0] */
- mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180);
-
- /* FEC RX_CLK */
- mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180);
-
- /* FEC RX_ER */
- mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3);
- mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180);
-
- /* FEC COL */
- mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180);
+ imx_iomux_v3_setup_multiple_pads(fec_pads,
+ ARRAY_SIZE(fec_pads));
#endif
}
}
@@ -376,155 +325,94 @@
static void setup_gpios(void)
{
+ static const iomux_v3_cfg_t gpio_pads_1[] = {
+ NEW_PAD_CTRL(MX51_PAD_GPIO1_7__GPIO1_7, PAD_CTL_PKE |
+ PAD_CTL_DSE_MED), /* CAM_SUP_DISn */
+ NEW_PAD_CTRL(MX51_PAD_DI1_PIN12__GPIO3_1, PAD_CTL_PKE |
+ PAD_CTL_DSE_MED), /* DAB Display EN */
+ NEW_PAD_CTRL(MX51_PAD_DI1_PIN13__GPIO3_2, PAD_CTL_PKE |
+ PAD_CTL_DSE_MED), /* WDOG_TRIGGER */
+ };
+
+ static const iomux_v3_cfg_t gpio_pads_2[] = {
+ NEW_PAD_CTRL(MX51_PAD_DI1_D0_CS__GPIO3_3, PAD_CTL_PKE |
+ PAD_CTL_DSE_MED), /* Display2 TxEN */
+ NEW_PAD_CTRL(MX51_PAD_DI1_D1_CS__GPIO3_4, PAD_CTL_PKE |
+ PAD_CTL_DSE_MED), /* DAB Light EN */
+ NEW_PAD_CTRL(MX51_PAD_DISPB2_SER_DIN__GPIO3_5, PAD_CTL_PKE |
+ PAD_CTL_DSE_MED), /* AUDIO_MUTE */
+ NEW_PAD_CTRL(MX51_PAD_DISPB2_SER_DIO__GPIO3_6, PAD_CTL_PKE |
+ PAD_CTL_DSE_MED), /* SPARE_OUT */
+ NEW_PAD_CTRL(MX51_PAD_NANDF_D14__GPIO3_26, PAD_CTL_PKE |
+ PAD_CTL_DSE_MED), /* BEEPER_EN */
+ NEW_PAD_CTRL(MX51_PAD_NANDF_D13__GPIO3_27, PAD_CTL_PKE |
+ PAD_CTL_DSE_MED), /* POWER_OFF */
+ NEW_PAD_CTRL(MX51_PAD_NANDF_D10__GPIO3_30, PAD_CTL_PKE |
+ PAD_CTL_DSE_MED), /* FRAM_WE */
+ NEW_PAD_CTRL(MX51_PAD_CSPI1_RDY__GPIO4_26, PAD_CTL_PKE |
+ PAD_CTL_DSE_MED), /* EXPANSION_EN */
+ MX51_PAD_GPIO1_2__PWM1_PWMO,
+ };
+
unsigned int i;
- /* CAM_SUP_DISn, GPIO1_7 */
- mxc_request_iomux(MX51_PIN_GPIO1_7, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_GPIO1_7, 0x82);
-
- /* DAB Display EN, GPIO3_1 */
- mxc_request_iomux(MX51_PIN_DI1_PIN12, IOMUX_CONFIG_ALT4);
- mxc_iomux_set_pad(MX51_PIN_DI1_PIN12, 0x82);
-
- /* WDOG_TRIGGER, GPIO3_2 */
- mxc_request_iomux(MX51_PIN_DI1_PIN13, IOMUX_CONFIG_ALT4);
- mxc_iomux_set_pad(MX51_PIN_DI1_PIN13, 0x82);
+ imx_iomux_v3_setup_multiple_pads(gpio_pads_1, ARRAY_SIZE(gpio_pads_1));
/* Now we need to trigger the watchdog */
WATCHDOG_RESET();
- /* Display2 TxEN, GPIO3_3 */
- mxc_request_iomux(MX51_PIN_DI1_D0_CS, IOMUX_CONFIG_ALT4);
- mxc_iomux_set_pad(MX51_PIN_DI1_D0_CS, 0x82);
-
- /* DAB Light EN, GPIO3_4 */
- mxc_request_iomux(MX51_PIN_DI1_D1_CS, IOMUX_CONFIG_ALT4);
- mxc_iomux_set_pad(MX51_PIN_DI1_D1_CS, 0x82);
-
- /* AUDIO_MUTE, GPIO3_5 */
- mxc_request_iomux(MX51_PIN_DISPB2_SER_DIN, IOMUX_CONFIG_ALT4);
- mxc_iomux_set_pad(MX51_PIN_DISPB2_SER_DIN, 0x82);
-
- /* SPARE_OUT, GPIO3_6 */
- mxc_request_iomux(MX51_PIN_DISPB2_SER_DIO, IOMUX_CONFIG_ALT4);
- mxc_iomux_set_pad(MX51_PIN_DISPB2_SER_DIO, 0x82);
-
- /* BEEPER_EN, GPIO3_26 */
- mxc_request_iomux(MX51_PIN_NANDF_D14, IOMUX_CONFIG_ALT3);
- mxc_iomux_set_pad(MX51_PIN_NANDF_D14, 0x82);
-
- /* POWER_OFF, GPIO3_27 */
- mxc_request_iomux(MX51_PIN_NANDF_D13, IOMUX_CONFIG_ALT3);
- mxc_iomux_set_pad(MX51_PIN_NANDF_D13, 0x82);
-
- /* FRAM_WE, GPIO3_30 */
- mxc_request_iomux(MX51_PIN_NANDF_D10, IOMUX_CONFIG_ALT3);
- mxc_iomux_set_pad(MX51_PIN_NANDF_D10, 0x82);
-
- /* EXPANSION_EN, GPIO4_26 */
- mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT3);
- mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, 0x82);
-
- /* PWM Output GPIO1_2 */
- mxc_request_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT1);
+ imx_iomux_v3_setup_multiple_pads(gpio_pads_2, ARRAY_SIZE(gpio_pads_2));
/*
* Set GPIO1_4 to high and output; it is used to reset
* the system on reboot
*/
- gpio_direction_output(4, 1);
+ gpio_direction_output(IMX_GPIO_NR(1, 4), 1);
- gpio_direction_output(7, 0);
- for (i = 65; i < 71; i++)
+ gpio_direction_output(IMX_GPIO_NR(1, 7), 0);
+ for (i = IMX_GPIO_NR(3, 1); i < IMX_GPIO_NR(3, 7); i++)
gpio_direction_output(i, 0);
- gpio_direction_output(94, 0);
+ gpio_direction_output(IMX_GPIO_NR(3, 30), 0);
/* Set POWER_OFF high */
- gpio_direction_output(91, 1);
+ gpio_direction_output(IMX_GPIO_NR(3, 27), 1);
- gpio_direction_output(90, 0);
+ gpio_direction_output(IMX_GPIO_NR(3, 26), 0);
- gpio_direction_output(122, 0);
+ gpio_direction_output(IMX_GPIO_NR(4, 26), 0);
- gpio_direction_output(121, 1);
+ gpio_direction_output(IMX_GPIO_NR(4, 25), 1);
WATCHDOG_RESET();
}
static void setup_fec(void)
{
- /*FEC_MDIO*/
- mxc_request_iomux(MX51_PIN_EIM_EB2, IOMUX_CONFIG_ALT3);
- mxc_iomux_set_pad(MX51_PIN_EIM_EB2, 0x1FD);
+ static const iomux_v3_cfg_t fec_pads[] = {
+ NEW_PAD_CTRL(MX51_PAD_EIM_EB2__FEC_MDIO, PAD_CTL_HYS |
+ PAD_CTL_PUS_22K_UP | PAD_CTL_ODE |
+ PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST),
+ MX51_PAD_NANDF_CS3__FEC_MDC,
+ NEW_PAD_CTRL(MX51_PAD_EIM_CS3__FEC_RDATA3, MX51_PAD_CTRL_2),
+ NEW_PAD_CTRL(MX51_PAD_EIM_CS2__FEC_RDATA2, MX51_PAD_CTRL_2),
+ NEW_PAD_CTRL(MX51_PAD_EIM_EB3__FEC_RDATA1, MX51_PAD_CTRL_2),
+ MX51_PAD_NANDF_D9__FEC_RDATA0,
+ MX51_PAD_NANDF_CS6__FEC_TDATA3,
+ MX51_PAD_NANDF_CS5__FEC_TDATA2,
+ MX51_PAD_NANDF_CS4__FEC_TDATA1,
+ MX51_PAD_NANDF_D8__FEC_TDATA0,
+ MX51_PAD_NANDF_CS7__FEC_TX_EN,
+ MX51_PAD_NANDF_CS2__FEC_TX_ER,
+ MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK,
+ NEW_PAD_CTRL(MX51_PAD_NANDF_RB2__FEC_COL, MX51_PAD_CTRL_4),
+ NEW_PAD_CTRL(MX51_PAD_NANDF_RB3__FEC_RX_CLK, MX51_PAD_CTRL_4),
+ MX51_PAD_EIM_CS5__FEC_CRS,
+ MX51_PAD_EIM_CS4__FEC_RX_ER,
+ NEW_PAD_CTRL(MX51_PAD_NANDF_D11__FEC_RX_DV, MX51_PAD_CTRL_4),
+ };
- /*FEC_MDC*/
- mxc_request_iomux(MX51_PIN_NANDF_CS3, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX51_PIN_NANDF_CS3, 0x2004);
-
- /* FEC RDATA[3] */
- mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3);
- mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180);
-
- /* FEC RDATA[2] */
- mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3);
- mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180);
-
- /* FEC RDATA[1] */
- mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3);
- mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180);
-
- /* FEC RDATA[0] */
- mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180);
-
- /* FEC TDATA[3] */
- mxc_request_iomux(MX51_PIN_NANDF_CS6, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX51_PIN_NANDF_CS6, 0x2004);
-
- /* FEC TDATA[2] */
- mxc_request_iomux(MX51_PIN_NANDF_CS5, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX51_PIN_NANDF_CS5, 0x2004);
-
- /* FEC TDATA[1] */
- mxc_request_iomux(MX51_PIN_NANDF_CS4, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX51_PIN_NANDF_CS4, 0x2004);
-
- /* FEC TDATA[0] */
- mxc_request_iomux(MX51_PIN_NANDF_D8, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX51_PIN_NANDF_D8, 0x2004);
-
- /* FEC TX_EN */
- mxc_request_iomux(MX51_PIN_NANDF_CS7, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_CS7, 0x2004);
-
- /* FEC TX_ER */
- mxc_request_iomux(MX51_PIN_NANDF_CS2, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX51_PIN_NANDF_CS2, 0x2004);
-
- /* FEC TX_CLK */
- mxc_request_iomux(MX51_PIN_NANDF_RDY_INT, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_RDY_INT, 0x2180);
-
- /* FEC TX_COL */
- mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180);
-
- /* FEC RX_CLK */
- mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180);
-
- /* FEC RX_CRS */
- mxc_request_iomux(MX51_PIN_EIM_CS5, IOMUX_CONFIG_ALT3);
- mxc_iomux_set_pad(MX51_PIN_EIM_CS5, 0x180);
-
- /* FEC RX_ER */
- mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3);
- mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180);
-
- /* FEC RX_DV */
- mxc_request_iomux(MX51_PIN_NANDF_D11, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX51_PIN_NANDF_D11, 0x2180);
+ imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
}
struct fsl_esdhc_cfg esdhc_cfg[1] = {
@@ -536,7 +424,7 @@
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
- *cd = gpio_get_value(0);
+ *cd = gpio_get_value(IMX_GPIO_NR(1, 0));
else
*cd = 0;
@@ -546,56 +434,24 @@
#ifdef CONFIG_FSL_ESDHC
int board_mmc_init(bd_t *bis)
{
- mxc_request_iomux(MX51_PIN_SD1_CMD,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_request_iomux(MX51_PIN_SD1_CLK,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_request_iomux(MX51_PIN_SD1_DATA0,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_request_iomux(MX51_PIN_SD1_DATA1,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_request_iomux(MX51_PIN_SD1_DATA2,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_request_iomux(MX51_PIN_SD1_DATA3,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_iomux_set_pad(MX51_PIN_SD1_CMD,
- PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
- PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_SD1_CLK,
- PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
- PAD_CTL_HYS_NONE | PAD_CTL_47K_PU |
- PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_SD1_DATA0,
- PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
- PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_SD1_DATA1,
- PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
- PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_SD1_DATA2,
- PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
- PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_SD1_DATA3,
- PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
- PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PD |
- PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
- mxc_request_iomux(MX51_PIN_GPIO1_0,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_iomux_set_pad(MX51_PIN_GPIO1_0,
- PAD_CTL_HYS_ENABLE);
- mxc_request_iomux(MX51_PIN_GPIO1_1,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_iomux_set_pad(MX51_PIN_GPIO1_1,
- PAD_CTL_HYS_ENABLE);
+ static const iomux_v3_cfg_t sd1_pads[] = {
+ NEW_PAD_CTRL(MX51_PAD_SD1_CMD__SD1_CMD, PAD_CTL_DSE_MAX |
+ PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_SD1_CLK__SD1_CLK, PAD_CTL_DSE_MAX |
+ PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_SD1_DATA0__SD1_DATA0, PAD_CTL_DSE_MAX |
+ PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_SD1_DATA1__SD1_DATA1, PAD_CTL_DSE_MAX |
+ PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_SD1_DATA2__SD1_DATA2, PAD_CTL_DSE_MAX |
+ PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_SD1_DATA3__SD1_DATA3, PAD_CTL_DSE_MAX |
+ PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_HYS),
+ NEW_PAD_CTRL(MX51_PAD_GPIO1_1__SD1_WP, PAD_CTL_HYS),
+ };
+
+ imx_iomux_v3_setup_multiple_pads(sd1_pads, ARRAY_SIZE(sd1_pads));
esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
@@ -604,13 +460,18 @@
void lcd_enable(void)
{
+ static const iomux_v3_cfg_t lcd_pads[] = {
+ MX51_PAD_DI1_PIN2__DI1_PIN2,
+ MX51_PAD_DI1_PIN3__DI1_PIN3,
+ };
+
int ret;
- mxc_request_iomux(MX51_PIN_DI1_PIN2, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX51_PIN_DI1_PIN3, IOMUX_CONFIG_ALT0);
+ imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
- gpio_set_value(2, 1);
- mxc_request_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT0);
+ gpio_set_value(IMX_GPIO_NR(1, 2), 1);
+ imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_GPIO1_2__GPIO1_2,
+ NO_PAD_CTRL));
ret = ipuv3_fb_init(&nec_nl6448bc26_09c, 0, IPU_PIX_FMT_RGB666);
if (ret)
@@ -624,9 +485,9 @@
init_drive_strength();
/* Setup debug led */
- gpio_direction_output(6, 0);
- mxc_request_iomux(MX51_PIN_GPIO1_6, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_GPIO1_6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ gpio_direction_output(IMX_GPIO_NR(1, 6), 0);
+ imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_GPIO1_6__GPIO1_6,
+ PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST));
/* wait a little while to give the pll time to settle */
sdelay(100000);
@@ -644,12 +505,12 @@
static void backlight(int on)
{
if (on) {
- gpio_set_value(65, 1);
+ gpio_set_value(IMX_GPIO_NR(3, 1), 1);
udelay(10000);
- gpio_set_value(68, 1);
+ gpio_set_value(IMX_GPIO_NR(3, 4), 1);
} else {
- gpio_set_value(65, 0);
- gpio_set_value(68, 0);
+ gpio_set_value(IMX_GPIO_NR(3, 1), 0);
+ gpio_set_value(IMX_GPIO_NR(3, 4), 0);
}
}
diff --git a/board/wandboard/README b/board/wandboard/README
index e0b0b33..ce83bbe 100644
--- a/board/wandboard/README
+++ b/board/wandboard/README
@@ -14,12 +14,12 @@
To build U-Boot for the Wandboard Dual Lite version:
-$ make wanboard_dl_config
+$ make wandboard_dl_config
$ make
To build U-Boot for the Wandboard Solo version:
-$ make wanboard_solo_config
+$ make wandboard_solo_config
$ make
Flashing U-boot into the SD card
diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c
index ac7b89a..5666cbf 100644
--- a/board/wandboard/wandboard.c
+++ b/board/wandboard/wandboard.c
@@ -10,34 +10,40 @@
*/
#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
#include <asm/arch/iomux.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/mx6-pins.h>
+#include <asm/arch/mxc_hdmi.h>
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/boot_mode.h>
#include <asm/io.h>
#include <asm/sizes.h>
#include <common.h>
#include <fsl_esdhc.h>
+#include <ipu_pixfmt.h>
#include <mmc.h>
#include <miiphy.h>
#include <netdev.h>
+#include <linux/fb.h>
DECLARE_GLOBAL_DATA_PTR;
-#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
+ PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
- PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
+ PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
+ PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-#define ENET_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+#define USDHC1_CD_GPIO IMX_GPIO_NR(1, 2)
+#define USDHC3_CD_GPIO IMX_GPIO_NR(3, 9)
#define ETH_PHY_RESET IMX_GPIO_NR(3, 29)
int dram_init(void)
@@ -52,6 +58,17 @@
MX6_PAD_CSI0_DAT11__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
};
+iomux_v3_cfg_t const usdhc1_pads[] = {
+ MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_DAT0__USDHC1_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_DAT1__USDHC1_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_DAT2__USDHC1_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_DAT3__USDHC1_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ /* Carrier MicroSD Card Detect */
+ MX6_PAD_GPIO_2__GPIO_1_2 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
static iomux_v3_cfg_t const usdhc3_pads[] = {
MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -59,6 +76,8 @@
MX6_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ /* SOM MicroSD Card Detect */
+ MX6_PAD_EIM_DA9__GPIO_3_9 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
static iomux_v3_cfg_t const enet_pads[] = {
@@ -96,18 +115,66 @@
gpio_set_value(ETH_PHY_RESET, 1);
}
-static struct fsl_esdhc_cfg usdhc_cfg[1] = {
+static struct fsl_esdhc_cfg usdhc_cfg[2] = {
{USDHC3_BASE_ADDR},
+ {USDHC1_BASE_ADDR},
};
+int board_mmc_getcd(struct mmc *mmc)
+{
+ struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ int ret = 0;
+
+ switch (cfg->esdhc_base) {
+ case USDHC1_BASE_ADDR:
+ ret = !gpio_get_value(USDHC1_CD_GPIO);
+ break;
+ case USDHC3_BASE_ADDR:
+ ret = !gpio_get_value(USDHC3_CD_GPIO);
+ break;
+ }
+
+ return ret;
+}
+
int board_mmc_init(bd_t *bis)
{
- imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+ s32 status = 0;
+ u32 index = 0;
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
- usdhc_cfg[0].max_bus_width = 4;
+ /*
+ * Following map is done:
+ * (U-boot device node) (Physical Port)
+ * mmc0 SOM MicroSD
+ * mmc1 Carrier board MicroSD
+ */
+ for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) {
+ switch (index) {
+ case 0:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+ usdhc_cfg[0].max_bus_width = 4;
+ gpio_direction_input(USDHC3_CD_GPIO);
+ break;
+ case 1:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
+ usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+ usdhc_cfg[1].max_bus_width = 4;
+ gpio_direction_input(USDHC1_CD_GPIO);
+ break;
+ default:
+ printf("Warning: you configured more USDHC controllers"
+ "(%d) then supported by the board (%d)\n",
+ index + 1, CONFIG_SYS_FSL_USDHC_NUM);
+ return status;
+ }
- return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
+ status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
+ }
+
+ return status;
}
static int mx6_rgmii_rework(struct phy_device *phydev)
@@ -143,6 +210,88 @@
return 0;
}
+#if defined(CONFIG_VIDEO_IPUV3)
+static void enable_hdmi(void)
+{
+ struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
+ u8 reg;
+ reg = readb(&hdmi->phy_conf0);
+ reg |= HDMI_PHY_CONF0_PDZ_MASK;
+ writeb(reg, &hdmi->phy_conf0);
+
+ udelay(3000);
+ reg |= HDMI_PHY_CONF0_ENTMDS_MASK;
+ writeb(reg, &hdmi->phy_conf0);
+ udelay(3000);
+ reg |= HDMI_PHY_CONF0_GEN2_TXPWRON_MASK;
+ writeb(reg, &hdmi->phy_conf0);
+ writeb(HDMI_MC_PHYRSTZ_ASSERT, &hdmi->mc_phyrstz);
+}
+
+static struct fb_videomode const hdmi = {
+ .name = "HDMI",
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 15385,
+ .left_margin = 220,
+ .right_margin = 40,
+ .upper_margin = 21,
+ .lower_margin = 7,
+ .hsync_len = 60,
+ .vsync_len = 10,
+ .sync = FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED
+};
+
+int board_video_skip(void)
+{
+ int ret;
+
+ ret = ipuv3_fb_init(&hdmi, 0, IPU_PIX_FMT_RGB24);
+
+ if (ret)
+ printf("HDMI cannot be configured: %d\n", ret);
+
+ enable_hdmi();
+
+ return ret;
+}
+
+static void setup_display(void)
+{
+ struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+ struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
+ int reg;
+
+ /* Turn on IPU clock */
+ reg = readl(&mxc_ccm->CCGR3);
+ reg |= MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET;
+ writel(reg, &mxc_ccm->CCGR3);
+
+ /* Turn on HDMI PHY clock */
+ reg = readl(&mxc_ccm->CCGR2);
+ reg |= MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_MASK
+ | MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_MASK;
+ writel(reg, &mxc_ccm->CCGR2);
+
+ /* clear HDMI PHY reset */
+ writeb(HDMI_MC_PHYRSTZ_DEASSERT, &hdmi->mc_phyrstz);
+
+ reg = readl(&mxc_ccm->chsccdr);
+ reg &= ~(MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_MASK
+ | MXC_CCM_CHSCCDR_IPU1_DI0_PODF_MASK
+ | MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK);
+ reg |= (CHSCCDR_CLK_SEL_LDB_DI0
+ << MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET)
+ | (CHSCCDR_PODF_DIVIDE_BY_3
+ << MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET)
+ | (CHSCCDR_IPU_PRE_CLK_540M_PFD
+ << MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_OFFSET);
+ writel(reg, &mxc_ccm->chsccdr);
+}
+#endif /* CONFIG_VIDEO_IPUV3 */
+
int board_eth_init(bd_t *bis)
{
int ret;
@@ -159,6 +308,36 @@
int board_early_init_f(void)
{
setup_iomux_uart();
+#if defined(CONFIG_VIDEO_IPUV3)
+ setup_display();
+#endif
+ return 0;
+}
+
+/*
+ * Do not overwrite the console
+ * Use always serial for U-Boot console
+ */
+int overwrite_console(void)
+{
+ return 1;
+}
+
+#ifdef CONFIG_CMD_BMODE
+static const struct boot_mode board_boot_modes[] = {
+ /* 4 bit bus width */
+ {"mmc0", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
+ {"mmc1", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x00)},
+ {NULL, 0},
+};
+#endif
+
+int board_late_init(void)
+{
+#ifdef CONFIG_CMD_BMODE
+ add_board_boot_modes(board_boot_modes);
+#endif
+
return 0;
}
diff --git a/board/woodburn/woodburn.c b/board/woodburn/woodburn.c
index 7c36af0..3f2e6b5 100644
--- a/board/woodburn/woodburn.c
+++ b/board/woodburn/woodburn.c
@@ -28,8 +28,7 @@
#include <asm/arch/imx-regs.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/clock.h>
-#include <asm/arch/mx35_pins.h>
-#include <asm/arch/iomux.h>
+#include <asm/arch/iomux-mx35.h>
#include <i2c.h>
#include <power/pmic.h>
#include <fsl_pmic.h>
@@ -74,25 +73,29 @@
static void setup_iomux_fec(void)
{
+ static const iomux_v3_cfg_t fec_pads[] = {
+ MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+ MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+ MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+ MX35_PAD_FEC_COL__FEC_COL,
+ MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+ MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+ MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+ MX35_PAD_FEC_MDC__FEC_MDC,
+ MX35_PAD_FEC_MDIO__FEC_MDIO,
+ MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+ MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+ MX35_PAD_FEC_CRS__FEC_CRS,
+ MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+ MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+ MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+ MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+ MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+ MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+ };
+
/* setup pins for FEC */
- mxc_request_iomux(MX35_PIN_FEC_TX_CLK, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_RX_CLK, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_RX_DV, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_COL, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_RDATA0, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_TDATA0, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_TX_EN, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_MDC, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_MDIO, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_TX_ERR, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_RX_ERR, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_CRS, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_RDATA1, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_TDATA1, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_RDATA2, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_TDATA2, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_RDATA3, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_TDATA3, MUX_CONFIG_FUNC);
+ imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
}
int woodburn_init(void)
@@ -130,9 +133,9 @@
setup_iomux_fec();
/* setup GPIO1_4 FEC_ENABLE signal */
- mxc_request_iomux(MX35_PIN_SCKR, MUX_CONFIG_ALT5);
+ imx_iomux_v3_setup_pad(MX35_PAD_SCKR__GPIO1_4);
gpio_direction_output(4, 1);
- mxc_request_iomux(MX35_PIN_HCKT, MUX_CONFIG_ALT5);
+ imx_iomux_v3_setup_pad(MX35_PAD_HCKT__GPIO1_9);
gpio_direction_output(9, 1);
return 0;
@@ -228,22 +231,24 @@
int board_mmc_init(bd_t *bis)
{
+ static const iomux_v3_cfg_t sdhc1_pads[] = {
+ MX35_PAD_SD1_CMD__ESDHC1_CMD,
+ MX35_PAD_SD1_CLK__ESDHC1_CLK,
+ MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
+ MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
+ MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
+ MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
+ };
+
/* configure pins for SDHC1 only */
- mxc_request_iomux(MX35_PIN_SD1_CMD, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_SD1_CLK, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_SD1_DATA0, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_SD1_DATA1, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_SD1_DATA2, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_SD1_DATA3, MUX_CONFIG_FUNC);
+ imx_iomux_v3_setup_multiple_pads(sdhc1_pads, ARRAY_SIZE(sdhc1_pads));
/* MMC Card Detect on GPIO1_7 */
- mxc_request_iomux(MX35_PIN_SCKT, MUX_CONFIG_ALT5);
- mxc_iomux_set_input(MUX_IN_GPIO1_IN_7, 0x1);
+ imx_iomux_v3_setup_pad(MX35_PAD_SCKT__GPIO1_7);
gpio_direction_input(GPIO_MMC_CD);
/* MMC Write Protection on GPIO1_8 */
- mxc_request_iomux(MX35_PIN_FST, MUX_CONFIG_ALT5);
- mxc_iomux_set_input(MUX_IN_GPIO1_IN_8, 0x1);
+ imx_iomux_v3_setup_pad(MX35_PAD_FST__GPIO1_8);
gpio_direction_input(GPIO_MMC_WP);
esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c
index 8ed75c3..b02c364 100644
--- a/board/xilinx/zynq/board.c
+++ b/board/xilinx/zynq/board.c
@@ -22,13 +22,52 @@
#include <common.h>
#include <netdev.h>
+#include <zynqpl.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sys_proto.h>
DECLARE_GLOBAL_DATA_PTR;
+#ifdef CONFIG_FPGA
+Xilinx_desc fpga;
+
+/* It can be done differently */
+Xilinx_desc fpga010 = XILINX_XC7Z010_DESC(0x10);
+Xilinx_desc fpga020 = XILINX_XC7Z020_DESC(0x20);
+Xilinx_desc fpga030 = XILINX_XC7Z030_DESC(0x30);
+Xilinx_desc fpga045 = XILINX_XC7Z045_DESC(0x45);
+#endif
+
int board_init(void)
{
+#ifdef CONFIG_FPGA
+ u32 idcode;
+
+ idcode = zynq_slcr_get_idcode();
+
+ switch (idcode) {
+ case XILINX_ZYNQ_7010:
+ fpga = fpga010;
+ break;
+ case XILINX_ZYNQ_7020:
+ fpga = fpga020;
+ break;
+ case XILINX_ZYNQ_7030:
+ fpga = fpga030;
+ break;
+ case XILINX_ZYNQ_7045:
+ fpga = fpga045;
+ break;
+ }
+#endif
+
icache_enable();
+#ifdef CONFIG_FPGA
+ fpga_init();
+ fpga_add(fpga_xilinx, &fpga);
+#endif
+
return 0;
}
@@ -38,10 +77,33 @@
{
u32 ret = 0;
-#if defined(CONFIG_ZYNQ_GEM) && defined(CONFIG_ZYNQ_GEM_BASEADDR0)
- ret = zynq_gem_initialize(bis, CONFIG_ZYNQ_GEM_BASEADDR0);
+#if defined(CONFIG_ZYNQ_GEM)
+# if defined(CONFIG_ZYNQ_GEM0)
+ ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR0,
+ CONFIG_ZYNQ_GEM_PHY_ADDR0, 0);
+# endif
+# if defined(CONFIG_ZYNQ_GEM1)
+ ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR1,
+ CONFIG_ZYNQ_GEM_PHY_ADDR1, 0);
+# endif
+#endif
+ return ret;
+}
#endif
+#ifdef CONFIG_CMD_MMC
+int board_mmc_init(bd_t *bd)
+{
+ int ret = 0;
+
+#if defined(CONFIG_ZYNQ_SDHCI)
+# if defined(CONFIG_ZYNQ_SDHCI0)
+ ret = zynq_sdhci_init(ZYNQ_SDHCI_BASEADDR0);
+# endif
+# if defined(CONFIG_ZYNQ_SDHCI1)
+ ret |= zynq_sdhci_init(ZYNQ_SDHCI_BASEADDR1);
+# endif
+#endif
return ret;
}
#endif
diff --git a/boards.cfg b/boards.cfg
index 05318a1..1e598cb 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -52,7 +52,6 @@
mx35pdk arm arm1136 - freescale mx35
woodburn arm arm1136 - - mx35
woodburn_sd arm arm1136 woodburn - mx35 woodburn_sd:IMX_CONFIG=board/woodburn/imximage.cfg
-omap2420h4 arm arm1136 - ti omap24xx
tnetv107x_evm arm arm1176 tnetv107xevm ti tnetv107x
rpi_b arm arm1176 rpi_b raspberrypi bcm2835
integratorap_cm720t arm arm720t integrator armltd - integratorap:CM720T
@@ -94,6 +93,7 @@
at91sam9g10ek_nandflash arm arm926ejs at91sam9261ek atmel at91 at91sam9261ek:AT91SAM9G10,SYS_USE_NANDFLASH
at91sam9g20ek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_DATAFLASH_CS0
at91sam9g20ek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_DATAFLASH_CS1
+at91sam9g20ek_mmc arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_MMC
at91sam9g20ek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_NANDFLASH
at91sam9g20ek_2mmc_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,AT91SAM9G20EK_2MMC,SYS_USE_NANDFLASH
at91sam9m10g45ek_nandflash arm arm926ejs at91sam9m10g45ek atmel at91 at91sam9m10g45ek:AT91SAM9M10G45,SYS_USE_NANDFLASH
@@ -106,6 +106,9 @@
at91sam9xeek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS0
at91sam9xeek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS1
at91sam9xeek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_NANDFLASH
+at91sam9n12ek_nandflash arm arm926ejs at91sam9n12ek atmel at91 at91sam9n12ek:AT91SAM9N12,SYS_USE_NANDFLASH
+at91sam9n12ek_spiflash arm arm926ejs at91sam9n12ek atmel at91 at91sam9n12ek:AT91SAM9N12,SYS_USE_SPIFLASH
+at91sam9n12ek_mmc arm arm926ejs at91sam9n12ek atmel at91 at91sam9n12ek:AT91SAM9N12,SYS_USE_MMC
snapper9260 arm arm926ejs - bluewater at91 snapper9260:AT91SAM9260
snapper9g20 arm arm926ejs snapper9260 bluewater at91 snapper9260:AT91SAM9G20
vl_ma2sc arm arm926ejs vl_ma2sc BuS at91
@@ -185,6 +188,7 @@
sheevaplug arm arm926ejs - Marvell kirkwood
ib62x0 arm arm926ejs ib62x0 raidsonic kirkwood
dockstar arm arm926ejs - Seagate kirkwood
+goflexhome arm arm926ejs - Seagate kirkwood
tk71 arm arm926ejs tk71 karo kirkwood
devkit3250 arm arm926ejs devkit3250 timll lpc32xx
jadecpu arm arm926ejs jadecpu syteco mb86r0x
@@ -234,7 +238,9 @@
versatileqemu arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_QEMU,ARCH_VERSATILE_PB
integratorap_cm946es arm arm946es integrator armltd - integratorap:CM946ES
integratorcp_cm946es arm arm946es integrator armltd - integratorcp:CM946ES
-ca9x4_ct_vxp arm armv7 vexpress armltd
+vexpress_ca15_tc2 arm armv7 vexpress armltd
+vexpress_ca5x2 arm armv7 vexpress armltd
+vexpress_ca9x4 arm armv7 vexpress armltd
am335x_evm arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1
am335x_evm_spiboot arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1,SPI_BOOT
am335x_evm_uart1 arm armv7 am335x ti am33xx am335x_evm:SERIAL2,CONS_INDEX=2
@@ -245,7 +251,11 @@
am335x_evm_usbspl arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1,SPL_USBETH_SUPPORT
ti814x_evm arm armv7 ti814x ti am33xx
pcm051 arm armv7 pcm051 phytec am33xx pcm051
+sama5d3xek_mmc arm armv7 sama5d3xek atmel at91 sama5d3xek:SAMA5D3,SYS_USE_MMC
+sama5d3xek_nandflash arm armv7 sama5d3xek atmel at91 sama5d3xek:SAMA5D3,SYS_USE_NANDFLASH
+sama5d3xek_spiflash arm armv7 sama5d3xek atmel at91 sama5d3xek:SAMA5D3,SYS_USE_SERIALFLASH
highbank arm armv7 highbank - highbank
+m53evk arm armv7 m53evk denx mx5 m53evk:IMX_CONFIG=board/denx/m53evk/imximage.cfg
mx51_efikamx arm armv7 mx51_efikamx genesi mx5 mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg
mx51_efikasb arm armv7 mx51_efikamx genesi mx5 mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_sb.cfg
mx51evk arm armv7 mx51evk freescale mx5 mx51evk:IMX_CONFIG=board/freescale/mx51evk/imximage.cfg
@@ -255,10 +265,14 @@
mx53smd arm armv7 mx53smd freescale mx5 mx53smd:IMX_CONFIG=board/freescale/mx53smd/imximage.cfg
ima3-mx53 arm armv7 ima3-mx53 esg mx5 ima3-mx53:IMX_CONFIG=board/esg/ima3-mx53/imximage.cfg
vision2 arm armv7 vision2 ttcontrol mx5 vision2:IMX_CONFIG=board/ttcontrol/vision2/imximage_hynix.cfg
+cgtqmx6qeval arm armv7 cgtqmx6eval congatec mx6 cgtqmx6eval:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg,MX6Q
mx6qarm2 arm armv7 mx6qarm2 freescale mx6 mx6qarm2:IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg
mx6qsabreauto arm armv7 mx6qsabreauto freescale mx6 mx6qsabreauto:IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg
mx6qsabrelite arm armv7 mx6qsabrelite freescale mx6 mx6qsabrelite:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
mx6qsabresd arm armv7 mx6qsabresd freescale mx6 mx6qsabresd:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
+mx6slevk arm armv7 mx6slevk freescale mx6 mx6slevk:IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL
+titanium arm armv7 titanium freescale mx6 titanium:IMX_CONFIG=board/freescale/titanium/imximage.cfg
+vf610twr arm armv7 vf610twr freescale vf610 vf610twr:IMX_CONFIG=board/freescale/vf610twr/imximage.cfg
eco5pk arm armv7 eco5pk 8dtech omap3
nitrogen6dl arm armv7 nitrogen6x boundary mx6 nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL,DDR_MB=1024
nitrogen6dl2g arm armv7 nitrogen6x boundary mx6 nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl2g.cfg,MX6DL,DDR_MB=2048
@@ -268,15 +282,16 @@
nitrogen6s1g arm armv7 nitrogen6x boundary mx6 nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024
wandboard_dl arm armv7 wandboard - mx6 wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL,DDR_MB=1024
wandboard_solo arm armv7 wandboard - mx6 wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s.cfg,MX6S,DDR_MB=512
-cm_t35 arm armv7 cm_t35 - omap3
omap3_overo arm armv7 overo - omap3
omap3_pandora arm armv7 pandora - omap3
dig297 arm armv7 dig297 comelit omap3
+cm_t35 arm armv7 cm_t35 compulab omap3
igep0020 arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_ONENAND
igep0020_nand arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND
igep0030 arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND
igep0030_nand arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND
igep0032 arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0032,BOOT_ONENAND
+igep0033 arm armv7 igep0033 isee am33xx
am3517_evm arm armv7 am3517evm logicpd omap3
mt_ventoux arm armv7 mt_ventoux teejet omap3
omap3_zoom1 arm armv7 zoom1 logicpd omap3
@@ -311,7 +326,7 @@
ventana arm armv7:arm720t ventana nvidia tegra20
whistler arm armv7:arm720t whistler nvidia tegra20
cardhu arm armv7:arm720t cardhu nvidia tegra30
-beaver arm armv7:arm720t cardhu nvidia tegra30
+beaver arm armv7:arm720t beaver nvidia tegra30
dalmore arm armv7:arm720t dalmore nvidia tegra114
colibri_t20_iris arm armv7:arm720t colibri_t20_iris toradex tegra20
u8500_href arm armv7 u8500 st-ericsson u8500
@@ -333,6 +348,7 @@
scpu arm ixp pdnb3 prodrive - pdnb3:SCPU
balloon3 arm pxa
h2200 arm pxa
+lp8x4x arm pxa lp8x4x icpdas
lubbock arm pxa
palmld arm pxa
palmtc arm pxa
@@ -880,6 +896,9 @@
P5020DS_SPIFLASH powerpc mpc85xx corenet_ds freescale - P5020DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
P5020DS_SRIO_PCIE_BOOT powerpc mpc85xx corenet_ds freescale - P5020DS:SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000
P5040DS powerpc mpc85xx corenet_ds freescale
+P5040DS_NAND powerpc mpc85xx corenet_ds freescale - P5040DS:RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000
+P5040DS_SDCARD powerpc mpc85xx corenet_ds freescale - P5040DS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
+P5040DS_SPIFLASH powerpc mpc85xx corenet_ds freescale - P5040DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
BSC9131RDB_SPIFLASH powerpc mpc85xx bsc9131rdb freescale - BSC9131RDB:BSC9131RDB,SPIFLASH
BSC9132QDS_NOR_DDRCLK100 powerpc mpc85xx bsc9132qds freescale - BSC9132QDS:BSC9132QDS,SYS_CLK_100_DDR_100
BSC9132QDS_NOR_DDRCLK133 powerpc mpc85xx bsc9132qds freescale - BSC9132QDS:BSC9132QDS,SYS_CLK_100_DDR_133
diff --git a/common/Makefile b/common/Makefile
index f50bf2e..3ba4316 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -111,6 +111,7 @@
COBJS-$(CONFIG_CMD_FPGA) += cmd_fpga.o
endif
COBJS-$(CONFIG_CMD_FS_GENERIC) += cmd_fs.o
+COBJS-$(CONFIG_CMD_FUSE) += cmd_fuse.o
COBJS-$(CONFIG_CMD_GETTIME) += cmd_gettime.o
COBJS-$(CONFIG_CMD_GPIO) += cmd_gpio.o
COBJS-$(CONFIG_CMD_I2C) += cmd_i2c.o
diff --git a/common/board_f.c b/common/board_f.c
index 81edbdf..8efdb63 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -421,19 +421,18 @@
#endif
gd->ram_top += get_effective_memsize();
gd->ram_top = board_get_usable_ram_top(gd->mon_len);
- gd->dest_addr = gd->ram_top;
+ gd->relocaddr = gd->ram_top;
debug("Ram top: %08lX\n", (ulong)gd->ram_top);
#if defined(CONFIG_MP) && (defined(CONFIG_MPC86xx) || defined(CONFIG_E500))
/*
* We need to make sure the location we intend to put secondary core
* boot code is reserved and not used by any part of u-boot
*/
- if (gd->dest_addr > determine_mp_bootpg(NULL)) {
- gd->dest_addr = determine_mp_bootpg(NULL);
- debug("Reserving MP boot page to %08lx\n", gd->dest_addr);
+ if (gd->relocaddr > determine_mp_bootpg(NULL)) {
+ gd->relocaddr = determine_mp_bootpg(NULL);
+ debug("Reserving MP boot page to %08lx\n", gd->relocaddr);
}
#endif
- gd->dest_addr_sp = gd->dest_addr;
return 0;
}
@@ -441,9 +440,9 @@
static int reserve_logbuffer(void)
{
/* reserve kernel log buffer */
- gd->dest_addr -= LOGBUFF_RESERVE;
+ gd->relocaddr -= LOGBUFF_RESERVE;
debug("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN,
- gd->dest_addr);
+ gd->relocaddr);
return 0;
}
#endif
@@ -455,9 +454,9 @@
ulong reg;
reg = getenv_ulong("pram", 10, CONFIG_PRAM);
- gd->dest_addr -= (reg << 10); /* size is in kB */
+ gd->relocaddr -= (reg << 10); /* size is in kB */
debug("Reserving %ldk for protected RAM at %08lx\n", reg,
- gd->dest_addr);
+ gd->relocaddr);
return 0;
}
#endif /* CONFIG_PRAM */
@@ -465,7 +464,7 @@
/* Round memory pointer down to next 4 kB limit */
static int reserve_round_4k(void)
{
- gd->dest_addr &= ~(4096 - 1);
+ gd->relocaddr &= ~(4096 - 1);
return 0;
}
@@ -475,12 +474,12 @@
{
/* reserve TLB table */
gd->arch.tlb_size = 4096 * 4;
- gd->dest_addr -= gd->arch.tlb_size;
+ gd->relocaddr -= gd->arch.tlb_size;
/* round down to next 64 kB limit */
- gd->dest_addr &= ~(0x10000 - 1);
+ gd->relocaddr &= ~(0x10000 - 1);
- gd->arch.tlb_addr = gd->dest_addr;
+ gd->arch.tlb_addr = gd->relocaddr;
debug("TLB table from %08lx to %08lx\n", gd->arch.tlb_addr,
gd->arch.tlb_addr + gd->arch.tlb_size);
return 0;
@@ -494,8 +493,8 @@
gd->fb_base = CONFIG_FB_ADDR;
#else
/* reserve memory for LCD display (always full pages) */
- gd->dest_addr = lcd_setmem(gd->dest_addr);
- gd->fb_base = gd->dest_addr;
+ gd->relocaddr = lcd_setmem(gd->relocaddr);
+ gd->fb_base = gd->relocaddr;
#endif /* CONFIG_FB_ADDR */
return 0;
}
@@ -506,8 +505,8 @@
static int reserve_video(void)
{
/* reserve memory for video display (always full pages) */
- gd->dest_addr = video_setmem(gd->dest_addr);
- gd->fb_base = gd->dest_addr;
+ gd->relocaddr = video_setmem(gd->relocaddr);
+ gd->fb_base = gd->relocaddr;
return 0;
}
@@ -519,15 +518,18 @@
* reserve memory for U-Boot code, data & bss
* round down to next 4 kB limit
*/
- gd->dest_addr -= gd->mon_len;
- gd->dest_addr &= ~(4096 - 1);
+ gd->relocaddr -= gd->mon_len;
+ gd->relocaddr &= ~(4096 - 1);
#ifdef CONFIG_E500
/* round down to next 64 kB limit so that IVPR stays aligned */
- gd->dest_addr &= ~(65536 - 1);
+ gd->relocaddr &= ~(65536 - 1);
#endif
debug("Reserving %ldk for U-Boot at: %08lx\n", gd->mon_len >> 10,
- gd->dest_addr);
+ gd->relocaddr);
+
+ gd->start_addr_sp = gd->relocaddr;
+
return 0;
}
@@ -535,20 +537,20 @@
/* reserve memory for malloc() area */
static int reserve_malloc(void)
{
- gd->dest_addr_sp = gd->dest_addr - TOTAL_MALLOC_LEN;
+ gd->start_addr_sp = gd->start_addr_sp - TOTAL_MALLOC_LEN;
debug("Reserving %dk for malloc() at: %08lx\n",
- TOTAL_MALLOC_LEN >> 10, gd->dest_addr_sp);
+ TOTAL_MALLOC_LEN >> 10, gd->start_addr_sp);
return 0;
}
/* (permanently) allocate a Board Info struct */
static int reserve_board(void)
{
- gd->dest_addr_sp -= sizeof(bd_t);
- gd->bd = (bd_t *)map_sysmem(gd->dest_addr_sp, sizeof(bd_t));
+ gd->start_addr_sp -= sizeof(bd_t);
+ gd->bd = (bd_t *)map_sysmem(gd->start_addr_sp, sizeof(bd_t));
memset(gd->bd, '\0', sizeof(bd_t));
debug("Reserving %zu Bytes for Board Info at: %08lx\n",
- sizeof(bd_t), gd->dest_addr_sp);
+ sizeof(bd_t), gd->start_addr_sp);
return 0;
}
#endif
@@ -563,10 +565,10 @@
static int reserve_global_data(void)
{
- gd->dest_addr_sp -= sizeof(gd_t);
- gd->new_gd = (gd_t *)map_sysmem(gd->dest_addr_sp, sizeof(gd_t));
+ gd->start_addr_sp -= sizeof(gd_t);
+ gd->new_gd = (gd_t *)map_sysmem(gd->start_addr_sp, sizeof(gd_t));
debug("Reserving %zu Bytes for Global Data at: %08lx\n",
- sizeof(gd_t), gd->dest_addr_sp);
+ sizeof(gd_t), gd->start_addr_sp);
return 0;
}
@@ -580,10 +582,10 @@
if (gd->fdt_blob) {
gd->fdt_size = ALIGN(fdt_totalsize(gd->fdt_blob) + 0x1000, 32);
- gd->dest_addr_sp -= gd->fdt_size;
- gd->new_fdt = map_sysmem(gd->dest_addr_sp, gd->fdt_size);
+ gd->start_addr_sp -= gd->fdt_size;
+ gd->new_fdt = map_sysmem(gd->start_addr_sp, gd->fdt_size);
debug("Reserving %lu Bytes for FDT at: %08lx\n",
- gd->fdt_size, gd->dest_addr_sp);
+ gd->fdt_size, gd->start_addr_sp);
}
return 0;
@@ -593,8 +595,8 @@
{
#ifdef CONFIG_SPL_BUILD
# ifdef CONFIG_ARM
- gd->dest_addr_sp -= 128; /* leave 32 words for abort-stack */
- gd->irq_sp = gd->dest_addr_sp;
+ gd->start_addr_sp -= 128; /* leave 32 words for abort-stack */
+ gd->irq_sp = gd->start_addr_sp;
# endif
#else
# ifdef CONFIG_PPC
@@ -602,9 +604,9 @@
# endif
/* setup stack pointer for exceptions */
- gd->dest_addr_sp -= 16;
- gd->dest_addr_sp &= ~0xf;
- gd->irq_sp = gd->dest_addr_sp;
+ gd->start_addr_sp -= 16;
+ gd->start_addr_sp &= ~0xf;
+ gd->irq_sp = gd->start_addr_sp;
/*
* Handle architecture-specific things here
@@ -613,18 +615,18 @@
*/
# ifdef CONFIG_ARM
# ifdef CONFIG_USE_IRQ
- gd->dest_addr_sp -= (CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ);
+ gd->start_addr_sp -= (CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ);
debug("Reserving %zu Bytes for IRQ stack at: %08lx\n",
- CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ, gd->dest_addr_sp);
+ CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ, gd->start_addr_sp);
/* 8-byte alignment for ARM ABI compliance */
- gd->dest_addr_sp &= ~0x07;
+ gd->start_addr_sp &= ~0x07;
# endif
/* leave 3 words for abort-stack, plus 1 for alignment */
- gd->dest_addr_sp -= 16;
+ gd->start_addr_sp -= 16;
# elif defined(CONFIG_PPC)
/* Clear initial stack frame */
- s = (ulong *) gd->dest_addr_sp;
+ s = (ulong *) gd->start_addr_sp;
*s = 0; /* Terminate back chain */
*++s = 0; /* NULL return address */
# endif /* Architecture specific code */
@@ -635,7 +637,7 @@
static int display_new_sp(void)
{
- debug("New Stack Pointer is: %08lx\n", gd->dest_addr_sp);
+ debug("New Stack Pointer is: %08lx\n", gd->start_addr_sp);
return 0;
}
@@ -757,15 +759,13 @@
static int setup_reloc(void)
{
- gd->relocaddr = gd->dest_addr;
- gd->start_addr_sp = gd->dest_addr_sp;
- gd->reloc_off = gd->dest_addr - CONFIG_SYS_TEXT_BASE;
+ gd->reloc_off = gd->relocaddr - CONFIG_SYS_TEXT_BASE;
memcpy(gd->new_gd, (char *)gd, sizeof(gd_t));
debug("Relocation Offset is: %08lx\n", gd->reloc_off);
debug("Relocating to %08lx, new gd at %08lx, sp at %08lx\n",
- gd->dest_addr, (ulong)map_to_sysmem(gd->new_gd),
- gd->dest_addr_sp);
+ gd->relocaddr, (ulong)map_to_sysmem(gd->new_gd),
+ gd->start_addr_sp);
return 0;
}
@@ -794,7 +794,7 @@
#elif defined(CONFIG_SANDBOX)
board_init_r(gd->new_gd, 0);
#else
- relocate_code(gd->dest_addr_sp, gd->new_gd, gd->dest_addr);
+ relocate_code(gd->start_addr_sp, gd->new_gd, gd->relocaddr);
#endif
return 0;
@@ -851,12 +851,6 @@
#ifdef CONFIG_ARM
timer_init, /* initialize timer */
#endif
-#ifdef CONFIG_BOARD_POSTCLK_INIT
- board_postclk_init,
-#endif
-#ifdef CONFIG_FSL_ESDHC
- get_clocks,
-#endif
#ifdef CONFIG_SYS_ALLOC_DPRAM
#if !defined(CONFIG_CPM2)
dpram_init,
@@ -865,6 +859,9 @@
#if defined(CONFIG_BOARD_POSTCLK_INIT)
board_postclk_init,
#endif
+#ifdef CONFIG_FSL_ESDHC
+ get_clocks,
+#endif
env_init, /* initialize environment */
#if defined(CONFIG_8xx_CPUCLK_DEFAULT)
/* get CPU and bus clocks according to the environment variable */
diff --git a/common/board_r.c b/common/board_r.c
index fd1fd31..f5649c9 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -137,7 +137,7 @@
#ifdef CONFIG_SYS_SYM_OFFSETS
monitor_flash_len = _end_ofs;
#elif !defined(CONFIG_SANDBOX)
- monitor_flash_len = (ulong)&__init_end - gd->dest_addr;
+ monitor_flash_len = (ulong)&__init_end - gd->relocaddr;
#endif
#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
/*
@@ -145,7 +145,7 @@
* We need to update it to point to the same CPU entry in RAM.
* TODO: why not just add gd->reloc_ofs?
*/
- gd->arch.cpu += gd->dest_addr - CONFIG_SYS_MONITOR_BASE;
+ gd->arch.cpu += gd->relocaddr - CONFIG_SYS_MONITOR_BASE;
/*
* If we didn't know the cpu mask & # cores, we can save them of
@@ -161,7 +161,7 @@
* in SRAM mode and initialize that cache from SRAM mode back to being
* a cache in cpu_init_r.
*/
- gd->env_addr += gd->dest_addr - CONFIG_SYS_MONITOR_BASE;
+ gd->env_addr += gd->relocaddr - CONFIG_SYS_MONITOR_BASE;
#endif
return 0;
}
@@ -178,7 +178,7 @@
/*
* Setup trap handlers
*/
- trap_init(gd->dest_addr);
+ trap_init(gd->relocaddr);
return 0;
}
@@ -263,7 +263,7 @@
ulong malloc_start;
/* The malloc area is immediately below the monitor copy in DRAM */
- malloc_start = gd->dest_addr - TOTAL_MALLOC_LEN;
+ malloc_start = gd->relocaddr - TOTAL_MALLOC_LEN;
mem_malloc_init((ulong)map_sysmem(malloc_start, TOTAL_MALLOC_LEN),
TOTAL_MALLOC_LEN);
return 0;
@@ -276,7 +276,7 @@
static int initr_announce(void)
{
- debug("Now running in RAM - U-Boot at: %08lx\n", gd->dest_addr);
+ debug("Now running in RAM - U-Boot at: %08lx\n", gd->relocaddr);
return 0;
}
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index 78e0bf6..17dc961 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -84,6 +84,10 @@
}
#if defined(CONFIG_PPC)
+void __weak board_detail(void)
+{
+ /* Please define boot_detail() for your platform */
+}
int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
@@ -162,6 +166,7 @@
printf("IP addr = %s\n", getenv("ipaddr"));
printf("baudrate = %6u bps\n", bd->bi_baudrate);
print_num("relocaddr", gd->relocaddr);
+ board_detail();
return 0;
}
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index dd6cafa..05130b6 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -93,11 +93,6 @@
static void fixup_silent_linux(void);
#endif
-static image_header_t *image_get_kernel(ulong img_addr, int verify);
-#if defined(CONFIG_FIT)
-static int fit_check_kernel(const void *fit, int os_noffset, int verify);
-#endif
-
static const void *boot_get_kernel(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[], bootm_headers_t *images,
ulong *os_data, ulong *os_len);
@@ -306,7 +301,7 @@
#if defined(CONFIG_OF_LIBFDT)
/* find flattened device tree */
- ret = boot_get_fdt(flag, argc, argv, &images,
+ ret = boot_get_fdt(flag, argc, argv, IH_ARCH_DEFAULT, &images,
&images.ft_addr, &images.ft_len);
if (ret) {
puts("Could not find a valid device tree\n");
@@ -336,12 +331,15 @@
ulong image_len = os.image_len;
__maybe_unused uint unc_len = CONFIG_SYS_BOOTM_LEN;
int no_overlap = 0;
+ void *load_buf, *image_buf;
#if defined(CONFIG_LZMA) || defined(CONFIG_LZO)
int ret;
#endif /* defined(CONFIG_LZMA) || defined(CONFIG_LZO) */
const char *type_name = genimg_get_type_name(os.type);
+ load_buf = map_sysmem(load, image_len);
+ image_buf = map_sysmem(image_start, image_len);
switch (comp) {
case IH_COMP_NONE:
if (load == blob_start || load == image_start) {
@@ -349,8 +347,7 @@
no_overlap = 1;
} else {
printf(" Loading %s ... ", type_name);
- memmove_wd((void *)load, (void *)image_start,
- image_len, CHUNKSZ);
+ memmove_wd(load_buf, image_buf, image_len, CHUNKSZ);
}
*load_end = load + image_len;
puts("OK\n");
@@ -358,8 +355,7 @@
#ifdef CONFIG_GZIP
case IH_COMP_GZIP:
printf(" Uncompressing %s ... ", type_name);
- if (gunzip((void *)load, unc_len,
- (uchar *)image_start, &image_len) != 0) {
+ if (gunzip(load_buf, unc_len, image_buf, &image_len) != 0) {
puts("GUNZIP: uncompress, out-of-mem or overwrite "
"error - must RESET board to recover\n");
if (boot_progress)
@@ -378,9 +374,9 @@
* use slower decompression algorithm which requires
* at most 2300 KB of memory.
*/
- int i = BZ2_bzBuffToBuffDecompress((char *)load,
- &unc_len, (char *)image_start, image_len,
- CONFIG_SYS_MALLOC_LEN < (4096 * 1024), 0);
+ int i = BZ2_bzBuffToBuffDecompress(load_buf, &unc_len,
+ image_buf, image_len,
+ CONFIG_SYS_MALLOC_LEN < (4096 * 1024), 0);
if (i != BZ_OK) {
printf("BUNZIP2: uncompress or overwrite error %d "
"- must RESET board to recover\n", i);
@@ -397,9 +393,8 @@
SizeT lzma_len = unc_len;
printf(" Uncompressing %s ... ", type_name);
- ret = lzmaBuffToBuffDecompress(
- (unsigned char *)load, &lzma_len,
- (unsigned char *)image_start, image_len);
+ ret = lzmaBuffToBuffDecompress(load_buf, &lzma_len,
+ image_buf, image_len);
unc_len = lzma_len;
if (ret != SZ_OK) {
printf("LZMA: uncompress or overwrite error %d "
@@ -415,9 +410,8 @@
case IH_COMP_LZO:
printf(" Uncompressing %s ... ", type_name);
- ret = lzop_decompress((const unsigned char *)image_start,
- image_len, (unsigned char *)load,
- &unc_len);
+ ret = lzop_decompress(image_buf, image_len, load_buf,
+ &unc_len);
if (ret != LZO_E_OK) {
printf("LZO: uncompress or overwrite error %d "
"- must RESET board to recover\n", ret);
@@ -797,54 +791,6 @@
}
/**
- * fit_check_kernel - verify FIT format kernel subimage
- * @fit_hdr: pointer to the FIT image header
- * os_noffset: kernel subimage node offset within FIT image
- * @verify: data CRC verification flag
- *
- * fit_check_kernel() verifies integrity of the kernel subimage and from
- * specified FIT image.
- *
- * returns:
- * 1, on success
- * 0, on failure
- */
-#if defined(CONFIG_FIT)
-static int fit_check_kernel(const void *fit, int os_noffset, int verify)
-{
- fit_image_print(fit, os_noffset, " ");
-
- if (verify) {
- puts(" Verifying Hash Integrity ... ");
- if (!fit_image_verify(fit, os_noffset)) {
- puts("Bad Data Hash\n");
- bootstage_error(BOOTSTAGE_ID_FIT_CHECK_HASH);
- return 0;
- }
- puts("OK\n");
- }
- bootstage_mark(BOOTSTAGE_ID_FIT_CHECK_ARCH);
-
- if (!fit_image_check_target_arch(fit, os_noffset)) {
- puts("Unsupported Architecture\n");
- bootstage_error(BOOTSTAGE_ID_FIT_CHECK_ARCH);
- return 0;
- }
-
- bootstage_mark(BOOTSTAGE_ID_FIT_CHECK_KERNEL);
- if (!fit_image_check_type(fit, os_noffset, IH_TYPE_KERNEL) &&
- !fit_image_check_type(fit, os_noffset, IH_TYPE_KERNEL_NOLOAD)) {
- puts("Not a kernel image\n");
- bootstage_error(BOOTSTAGE_ID_FIT_CHECK_KERNEL);
- return 0;
- }
-
- bootstage_mark(BOOTSTAGE_ID_FIT_CHECKED);
- return 1;
-}
-#endif /* CONFIG_FIT */
-
-/**
* boot_get_kernel - find kernel image
* @os_data: pointer to a ulong variable, will hold os data start address
* @os_len: pointer to a ulong variable, will hold os data length
@@ -864,12 +810,8 @@
ulong img_addr;
const void *buf;
#if defined(CONFIG_FIT)
- const void *fit_hdr;
const char *fit_uname_config = NULL;
const char *fit_uname_kernel = NULL;
- const void *data;
- size_t len;
- int cfg_noffset;
int os_noffset;
#endif
@@ -946,84 +888,16 @@
break;
#if defined(CONFIG_FIT)
case IMAGE_FORMAT_FIT:
- fit_hdr = buf;
- printf("## Booting kernel from FIT Image at %08lx ...\n",
- img_addr);
-
- if (!fit_check_format(fit_hdr)) {
- puts("Bad FIT kernel image format!\n");
- bootstage_error(BOOTSTAGE_ID_FIT_FORMAT);
- return NULL;
- }
- bootstage_mark(BOOTSTAGE_ID_FIT_FORMAT);
-
- if (!fit_uname_kernel) {
- /*
- * no kernel image node unit name, try to get config
- * node first. If config unit node name is NULL
- * fit_conf_get_node() will try to find default config
- * node
- */
- bootstage_mark(BOOTSTAGE_ID_FIT_NO_UNIT_NAME);
-#ifdef CONFIG_FIT_BEST_MATCH
- if (fit_uname_config)
- cfg_noffset =
- fit_conf_get_node(fit_hdr,
- fit_uname_config);
- else
- cfg_noffset =
- fit_conf_find_compat(fit_hdr,
- gd->fdt_blob);
-#else
- cfg_noffset = fit_conf_get_node(fit_hdr,
- fit_uname_config);
-#endif
- if (cfg_noffset < 0) {
- bootstage_error(BOOTSTAGE_ID_FIT_NO_UNIT_NAME);
- return NULL;
- }
- /* save configuration uname provided in the first
- * bootm argument
- */
- images->fit_uname_cfg = fdt_get_name(fit_hdr,
- cfg_noffset,
- NULL);
- printf(" Using '%s' configuration\n",
- images->fit_uname_cfg);
- bootstage_mark(BOOTSTAGE_ID_FIT_CONFIG);
-
- os_noffset = fit_conf_get_kernel_node(fit_hdr,
- cfg_noffset);
- fit_uname_kernel = fit_get_name(fit_hdr, os_noffset,
- NULL);
- } else {
- /* get kernel component image node offset */
- bootstage_mark(BOOTSTAGE_ID_FIT_UNIT_NAME);
- os_noffset = fit_image_get_node(fit_hdr,
- fit_uname_kernel);
- }
- if (os_noffset < 0) {
- bootstage_error(BOOTSTAGE_ID_FIT_CONFIG);
- return NULL;
- }
-
- printf(" Trying '%s' kernel subimage\n", fit_uname_kernel);
-
- bootstage_mark(BOOTSTAGE_ID_FIT_CHECK_SUBIMAGE);
- if (!fit_check_kernel(fit_hdr, os_noffset, images->verify))
+ os_noffset = fit_image_load(images, FIT_KERNEL_PROP,
+ img_addr,
+ &fit_uname_kernel, fit_uname_config,
+ IH_ARCH_DEFAULT, IH_TYPE_KERNEL,
+ BOOTSTAGE_ID_FIT_KERNEL_START,
+ FIT_LOAD_IGNORED, os_data, os_len);
+ if (os_noffset < 0)
return NULL;
- /* get kernel image data address and length */
- if (fit_image_get_data(fit_hdr, os_noffset, &data, &len)) {
- puts("Could not find kernel subimage data!\n");
- bootstage_error(BOOTSTAGE_ID_FIT_KERNEL_INFO_ERR);
- return NULL;
- }
- bootstage_mark(BOOTSTAGE_ID_FIT_KERNEL_INFO);
-
- *os_len = len;
- *os_data = (ulong)data;
- images->fit_hdr_os = (void *)fit_hdr;
+ images->fit_hdr_os = map_sysmem(img_addr, 0);
images->fit_uname_os = fit_uname_kernel;
images->fit_noffset_os = os_noffset;
break;
@@ -1423,9 +1297,14 @@
/* helper routines */
/*******************************************************************/
#if defined(CONFIG_SILENT_CONSOLE) && !defined(CONFIG_SILENT_U_BOOT_ONLY)
+
+#define CONSOLE_ARG "console="
+#define CONSOLE_ARG_LEN (sizeof(CONSOLE_ARG) - 1)
+
static void fixup_silent_linux(void)
{
- char buf[256], *start, *end;
+ char *buf;
+ const char *env_val;
char *cmdline = getenv("bootargs");
/* Only fix cmdline when requested */
@@ -1433,25 +1312,37 @@
return;
debug("before silent fix-up: %s\n", cmdline);
- if (cmdline) {
- start = strstr(cmdline, "console=");
- if (start) {
- end = strchr(start, ' ');
- strncpy(buf, cmdline, (start - cmdline + 8));
- if (end)
- strcpy(buf + (start - cmdline + 8), end);
- else
- buf[start - cmdline + 8] = '\0';
- } else {
- strcpy(buf, cmdline);
- strcat(buf, " console=");
+ if (cmdline && (cmdline[0] != '\0')) {
+ char *start = strstr(cmdline, CONSOLE_ARG);
+
+ /* Allocate space for maximum possible new command line */
+ buf = malloc(strlen(cmdline) + 1 + CONSOLE_ARG_LEN + 1);
+ if (!buf) {
+ debug("%s: out of memory\n", __func__);
+ return;
}
+
+ if (start) {
+ char *end = strchr(start, ' ');
+ int num_start_bytes = start - cmdline + CONSOLE_ARG_LEN;
+
+ strncpy(buf, cmdline, num_start_bytes);
+ if (end)
+ strcpy(buf + num_start_bytes, end);
+ else
+ buf[num_start_bytes] = '\0';
+ } else {
+ sprintf(buf, "%s %s", cmdline, CONSOLE_ARG);
+ }
+ env_val = buf;
} else {
- strcpy(buf, "console=");
+ buf = NULL;
+ env_val = CONSOLE_ARG;
}
- setenv("bootargs", buf);
- debug("after silent fix-up: %s\n", buf);
+ setenv("bootargs", env_val);
+ debug("after silent fix-up: %s\n", env_val);
+ free(buf);
}
#endif /* CONFIG_SILENT_CONSOLE */
@@ -1803,7 +1694,7 @@
#if defined(CONFIG_OF_LIBFDT)
/* find flattened device tree */
- ret = boot_get_fdt(flag, argc, argv, images,
+ ret = boot_get_fdt(flag, argc, argv, IH_ARCH_DEFAULT, images,
&images->ft_addr, &images->ft_len);
if (ret) {
puts("Could not find a valid device tree\n");
diff --git a/common/cmd_fitupd.c b/common/cmd_fitupd.c
index 7a3789e..618ff7c 100644
--- a/common/cmd_fitupd.c
+++ b/common/cmd_fitupd.c
@@ -8,13 +8,12 @@
#include <common.h>
#include <command.h>
+#include <net.h>
#if !defined(CONFIG_UPDATE_TFTP)
#error "CONFIG_UPDATE_TFTP required"
#endif
-extern int update_tftp(ulong addr);
-
static int do_fitupd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong addr = 0UL;
diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c
index 1341604..3cd1b13 100644
--- a/common/cmd_fpga.c
+++ b/common/cmd_fpga.c
@@ -27,14 +27,11 @@
*/
#include <common.h>
#include <command.h>
-#if defined(CONFIG_CMD_NET)
-#include <net.h>
-#endif
#include <fpga.h>
#include <malloc.h>
/* Local functions */
-static int fpga_get_op (char *opstr);
+static int fpga_get_op(char *opstr);
/* Local defines */
#define FPGA_NONE -1
@@ -44,102 +41,6 @@
#define FPGA_DUMP 3
#define FPGA_LOADMK 4
-/* Convert bitstream data and load into the fpga */
-int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size)
-{
-#if defined(CONFIG_FPGA_XILINX)
- unsigned int length;
- unsigned int swapsize;
- char buffer[80];
- unsigned char *dataptr;
- unsigned int i;
- int rc;
-
- dataptr = (unsigned char *)fpgadata;
-
- /* skip the first bytes of the bitsteam, their meaning is unknown */
- length = (*dataptr << 8) + *(dataptr+1);
- dataptr+=2;
- dataptr+=length;
-
- /* get design name (identifier, length, string) */
- length = (*dataptr << 8) + *(dataptr+1);
- dataptr+=2;
- if (*dataptr++ != 0x61) {
- debug("%s: Design name identifier not recognized "
- "in bitstream\n",
- __func__);
- return FPGA_FAIL;
- }
-
- length = (*dataptr << 8) + *(dataptr+1);
- dataptr+=2;
- for(i=0;i<length;i++)
- buffer[i] = *dataptr++;
-
- printf(" design filename = \"%s\"\n", buffer);
-
- /* get part number (identifier, length, string) */
- if (*dataptr++ != 0x62) {
- printf("%s: Part number identifier not recognized "
- "in bitstream\n",
- __func__);
- return FPGA_FAIL;
- }
-
- length = (*dataptr << 8) + *(dataptr+1);
- dataptr+=2;
- for(i=0;i<length;i++)
- buffer[i] = *dataptr++;
- printf(" part number = \"%s\"\n", buffer);
-
- /* get date (identifier, length, string) */
- if (*dataptr++ != 0x63) {
- printf("%s: Date identifier not recognized in bitstream\n",
- __func__);
- return FPGA_FAIL;
- }
-
- length = (*dataptr << 8) + *(dataptr+1);
- dataptr+=2;
- for(i=0;i<length;i++)
- buffer[i] = *dataptr++;
- printf(" date = \"%s\"\n", buffer);
-
- /* get time (identifier, length, string) */
- if (*dataptr++ != 0x64) {
- printf("%s: Time identifier not recognized in bitstream\n",
- __func__);
- return FPGA_FAIL;
- }
-
- length = (*dataptr << 8) + *(dataptr+1);
- dataptr+=2;
- for(i=0;i<length;i++)
- buffer[i] = *dataptr++;
- printf(" time = \"%s\"\n", buffer);
-
- /* get fpga data length (identifier, length) */
- if (*dataptr++ != 0x65) {
- printf("%s: Data length identifier not recognized in bitstream\n",
- __func__);
- return FPGA_FAIL;
- }
- swapsize = ((unsigned int) *dataptr <<24) +
- ((unsigned int) *(dataptr+1) <<16) +
- ((unsigned int) *(dataptr+2) <<8 ) +
- ((unsigned int) *(dataptr+3) ) ;
- dataptr+=4;
- printf(" bytes in bitstream = %d\n", swapsize);
-
- rc = fpga_load(dev, dataptr, swapsize);
- return rc;
-#else
- printf("Bitstream support only for Xilinx devices\n");
- return FPGA_FAIL;
-#endif
-}
-
/* ------------------------------------------------------------------------- */
/* command form:
* fpga <op> <device number> <data addr> <datasize>
@@ -148,81 +49,81 @@
* If there is no data addr field, the fpgadata environment variable is used.
* The info command requires no data address field.
*/
-int do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
+int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
{
int op, dev = FPGA_INVALID_DEVICE;
size_t data_size = 0;
void *fpga_data = NULL;
- char *devstr = getenv ("fpga");
- char *datastr = getenv ("fpgadata");
+ char *devstr = getenv("fpga");
+ char *datastr = getenv("fpgadata");
int rc = FPGA_FAIL;
int wrong_parms = 0;
-#if defined (CONFIG_FIT)
+#if defined(CONFIG_FIT)
const char *fit_uname = NULL;
ulong fit_addr;
#endif
if (devstr)
- dev = (int) simple_strtoul (devstr, NULL, 16);
+ dev = (int) simple_strtoul(devstr, NULL, 16);
if (datastr)
- fpga_data = (void *) simple_strtoul (datastr, NULL, 16);
+ fpga_data = (void *)simple_strtoul(datastr, NULL, 16);
switch (argc) {
case 5: /* fpga <op> <dev> <data> <datasize> */
- data_size = simple_strtoul (argv[4], NULL, 16);
+ data_size = simple_strtoul(argv[4], NULL, 16);
case 4: /* fpga <op> <dev> <data> */
#if defined(CONFIG_FIT)
- if (fit_parse_subimage (argv[3], (ulong)fpga_data,
- &fit_addr, &fit_uname)) {
+ if (fit_parse_subimage(argv[3], (ulong)fpga_data,
+ &fit_addr, &fit_uname)) {
fpga_data = (void *)fit_addr;
- debug("* fpga: subimage '%s' from FIT image "
- "at 0x%08lx\n",
- fit_uname, fit_addr);
+ debug("* fpga: subimage '%s' from FIT image ",
+ fit_uname);
+ debug("at 0x%08lx\n", fit_addr);
} else
#endif
{
- fpga_data = (void *) simple_strtoul (argv[3], NULL, 16);
+ fpga_data = (void *)simple_strtoul(argv[3], NULL, 16);
debug("* fpga: cmdline image address = 0x%08lx\n",
- (ulong)fpga_data);
+ (ulong)fpga_data);
}
- debug("%s: fpga_data = 0x%x\n", __func__, (uint) fpga_data);
+ debug("%s: fpga_data = 0x%x\n", __func__, (uint)fpga_data);
case 3: /* fpga <op> <dev | data addr> */
- dev = (int) simple_strtoul (argv[2], NULL, 16);
+ dev = (int)simple_strtoul(argv[2], NULL, 16);
debug("%s: device = %d\n", __func__, dev);
/* FIXME - this is a really weak test */
- if ((argc == 3) && (dev > fpga_count ())) { /* must be buffer ptr */
+ if ((argc == 3) && (dev > fpga_count())) {
+ /* must be buffer ptr */
debug("%s: Assuming buffer pointer in arg 3\n",
- __func__);
+ __func__);
#if defined(CONFIG_FIT)
- if (fit_parse_subimage (argv[2], (ulong)fpga_data,
- &fit_addr, &fit_uname)) {
+ if (fit_parse_subimage(argv[2], (ulong)fpga_data,
+ &fit_addr, &fit_uname)) {
fpga_data = (void *)fit_addr;
- debug("* fpga: subimage '%s' from FIT image "
- "at 0x%08lx\n",
- fit_uname, fit_addr);
+ debug("* fpga: subimage '%s' from FIT image ",
+ fit_uname);
+ debug("at 0x%08lx\n", fit_addr);
} else
#endif
{
- fpga_data = (void *) dev;
- debug("* fpga: cmdline image address = "
- "0x%08lx\n", (ulong)fpga_data);
+ fpga_data = (void *)dev;
+ debug("* fpga: cmdline image addr = 0x%08lx\n",
+ (ulong)fpga_data);
}
debug("%s: fpga_data = 0x%x\n",
- __func__, (uint) fpga_data);
+ __func__, (uint)fpga_data);
dev = FPGA_INVALID_DEVICE; /* reset device num */
}
case 2: /* fpga <op> */
- op = (int) fpga_get_op (argv[1]);
+ op = (int)fpga_get_op(argv[1]);
break;
default:
- debug("%s: Too many or too few args (%d)\n",
- __func__, argc);
+ debug("%s: Too many or too few args (%d)\n", __func__, argc);
op = FPGA_NONE; /* force usage display */
break;
}
@@ -258,11 +159,11 @@
return CMD_RET_USAGE;
case FPGA_INFO:
- rc = fpga_info (dev);
+ rc = fpga_info(dev);
break;
case FPGA_LOAD:
- rc = fpga_load (dev, fpga_data, data_size);
+ rc = fpga_load(dev, fpga_data, data_size);
break;
case FPGA_LOADB:
@@ -270,15 +171,16 @@
break;
case FPGA_LOADMK:
- switch (genimg_get_format (fpga_data)) {
+ switch (genimg_get_format(fpga_data)) {
case IMAGE_FORMAT_LEGACY:
{
- image_header_t *hdr = (image_header_t *)fpga_data;
- ulong data;
+ image_header_t *hdr =
+ (image_header_t *)fpga_data;
+ ulong data;
- data = (ulong)image_get_data (hdr);
- data_size = image_get_data_size (hdr);
- rc = fpga_load (dev, (void *)data, data_size);
+ data = (ulong)image_get_data(hdr);
+ data_size = image_get_data_size(hdr);
+ rc = fpga_load(dev, (void *)data, data_size);
}
break;
#if defined(CONFIG_FIT)
@@ -289,19 +191,21 @@
const void *fit_data;
if (fit_uname == NULL) {
- puts ("No FIT subimage unit name\n");
+ puts("No FIT subimage unit name\n");
return 1;
}
- if (!fit_check_format (fit_hdr)) {
- puts ("Bad FIT image format\n");
+ if (!fit_check_format(fit_hdr)) {
+ puts("Bad FIT image format\n");
return 1;
}
/* get fpga component image node offset */
- noffset = fit_image_get_node (fit_hdr, fit_uname);
+ noffset = fit_image_get_node(fit_hdr,
+ fit_uname);
if (noffset < 0) {
- printf ("Can't find '%s' FIT subimage\n", fit_uname);
+ printf("Can't find '%s' FIT subimage\n",
+ fit_uname);
return 1;
}
@@ -312,72 +216,72 @@
}
/* get fpga subimage data address and length */
- if (fit_image_get_data (fit_hdr, noffset, &fit_data, &data_size)) {
- puts ("Could not find fpga subimage data\n");
+ if (fit_image_get_data(fit_hdr, noffset,
+ &fit_data, &data_size)) {
+ puts("Fpga subimage data not found\n");
return 1;
}
- rc = fpga_load (dev, fit_data, data_size);
+ rc = fpga_load(dev, fit_data, data_size);
}
break;
#endif
default:
- puts ("** Unknown image type\n");
+ puts("** Unknown image type\n");
rc = FPGA_FAIL;
break;
}
break;
case FPGA_DUMP:
- rc = fpga_dump (dev, fpga_data, data_size);
+ rc = fpga_dump(dev, fpga_data, data_size);
break;
default:
- printf ("Unknown operation\n");
+ printf("Unknown operation\n");
return CMD_RET_USAGE;
}
- return (rc);
+ return rc;
}
/*
* Map op to supported operations. We don't use a table since we
* would just have to relocate it from flash anyway.
*/
-static int fpga_get_op (char *opstr)
+static int fpga_get_op(char *opstr)
{
int op = FPGA_NONE;
- if (!strcmp ("info", opstr)) {
+ if (!strcmp("info", opstr))
op = FPGA_INFO;
- } else if (!strcmp ("loadb", opstr)) {
+ else if (!strcmp("loadb", opstr))
op = FPGA_LOADB;
- } else if (!strcmp ("load", opstr)) {
+ else if (!strcmp("load", opstr))
op = FPGA_LOAD;
- } else if (!strcmp ("loadmk", opstr)) {
+ else if (!strcmp("loadmk", opstr))
op = FPGA_LOADMK;
- } else if (!strcmp ("dump", opstr)) {
+ else if (!strcmp("dump", opstr))
op = FPGA_DUMP;
- }
- if (op == FPGA_NONE) {
- printf ("Unknown fpga operation \"%s\"\n", opstr);
- }
+ if (op == FPGA_NONE)
+ printf("Unknown fpga operation \"%s\"\n", opstr);
+
return op;
}
-U_BOOT_CMD (fpga, 6, 1, do_fpga,
- "loadable FPGA image support",
- "[operation type] [device number] [image address] [image size]\n"
- "fpga operations:\n"
- " dump\t[dev]\t\t\tLoad device to memory buffer\n"
- " info\t[dev]\t\t\tlist known device information\n"
- " load\t[dev] [address] [size]\tLoad device from memory buffer\n"
- " loadb\t[dev] [address] [size]\t"
- "Load device from bitstream buffer (Xilinx only)\n"
- " loadmk [dev] [address]\tLoad device generated with mkimage"
+U_BOOT_CMD(fpga, 6, 1, do_fpga,
+ "loadable FPGA image support",
+ "[operation type] [device number] [image address] [image size]\n"
+ "fpga operations:\n"
+ " dump\t[dev]\t\t\tLoad device to memory buffer\n"
+ " info\t[dev]\t\t\tlist known device information\n"
+ " load\t[dev] [address] [size]\tLoad device from memory buffer\n"
+ " loadb\t[dev] [address] [size]\t"
+ "Load device from bitstream buffer (Xilinx only)\n"
+ " loadmk [dev] [address]\tLoad device generated with mkimage"
#if defined(CONFIG_FIT)
- "\n"
- "\tFor loadmk operating on FIT format uImage address must include\n"
- "\tsubimage unit name in the form of addr:<subimg_uname>"
+ "\n"
+ "\tFor loadmk operating on FIT format uImage address must include\n"
+ "\tsubimage unit name in the form of addr:<subimg_uname>"
#endif
);
diff --git a/common/cmd_fuse.c b/common/cmd_fuse.c
new file mode 100644
index 0000000..f24c01c
--- /dev/null
+++ b/common/cmd_fuse.c
@@ -0,0 +1,168 @@
+/*
+ * (C) Copyright 2009-2013 ADVANSEE
+ * Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
+ *
+ * Based on the mpc512x iim code:
+ * Copyright 2008 Silicon Turnkey Express, Inc.
+ * Martha Marx <mmarx@silicontkx.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <fuse.h>
+#include <asm/errno.h>
+
+static int strtou32(const char *str, unsigned int base, u32 *result)
+{
+ char *ep;
+
+ *result = simple_strtoul(str, &ep, base);
+ if (ep == str || *ep != '\0')
+ return -EINVAL;
+
+ return 0;
+}
+
+static int confirm_prog(void)
+{
+ puts("Warning: Programming fuses is an irreversible operation!\n"
+ " This may brick your system.\n"
+ " Use this command only if you are sure of "
+ "what you are doing!\n"
+ "\nReally perform this fuse programming? <y/N>\n");
+
+ if (getc() == 'y') {
+ int c;
+
+ putc('y');
+ c = getc();
+ putc('\n');
+ if (c == '\r')
+ return 1;
+ }
+
+ puts("Fuse programming aborted\n");
+ return 0;
+}
+
+static int do_fuse(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+ const char *op = argc >= 2 ? argv[1] : NULL;
+ int confirmed = argc >= 3 && !strcmp(argv[2], "-y");
+ u32 bank, word, cnt, val;
+ int ret, i;
+
+ argc -= 2 + confirmed;
+ argv += 2 + confirmed;
+
+ if (argc < 2 || strtou32(argv[0], 0, &bank) ||
+ strtou32(argv[1], 0, &word))
+ return CMD_RET_USAGE;
+
+ if (!strcmp(op, "read")) {
+ if (argc == 2)
+ cnt = 1;
+ else if (argc != 3 || strtou32(argv[2], 0, &cnt))
+ return CMD_RET_USAGE;
+
+ printf("Reading bank %u:\n", bank);
+ for (i = 0; i < cnt; i++, word++) {
+ if (!(i % 4))
+ printf("\nWord 0x%.8x:", word);
+
+ ret = fuse_read(bank, word, &val);
+ if (ret)
+ goto err;
+
+ printf(" %.8x", val);
+ }
+ putc('\n');
+ } else if (!strcmp(op, "sense")) {
+ if (argc == 2)
+ cnt = 1;
+ else if (argc != 3 || strtou32(argv[2], 0, &cnt))
+ return CMD_RET_USAGE;
+
+ printf("Sensing bank %u:\n", bank);
+ for (i = 0; i < cnt; i++, word++) {
+ if (!(i % 4))
+ printf("\nWord 0x%.8x:", word);
+
+ ret = fuse_sense(bank, word, &val);
+ if (ret)
+ goto err;
+
+ printf(" %.8x", val);
+ }
+ putc('\n');
+ } else if (!strcmp(op, "prog")) {
+ if (argc < 3)
+ return CMD_RET_USAGE;
+
+ for (i = 2; i < argc; i++, word++) {
+ if (strtou32(argv[i], 16, &val))
+ return CMD_RET_USAGE;
+
+ printf("Programming bank %u word 0x%.8x to 0x%.8x...\n",
+ bank, word, val);
+ if (!confirmed && !confirm_prog())
+ return CMD_RET_FAILURE;
+ ret = fuse_prog(bank, word, val);
+ if (ret)
+ goto err;
+ }
+ } else if (!strcmp(op, "override")) {
+ if (argc < 3)
+ return CMD_RET_USAGE;
+
+ for (i = 2; i < argc; i++, word++) {
+ if (strtou32(argv[i], 16, &val))
+ return CMD_RET_USAGE;
+
+ printf("Overriding bank %u word 0x%.8x with "
+ "0x%.8x...\n", bank, word, val);
+ ret = fuse_override(bank, word, val);
+ if (ret)
+ goto err;
+ }
+ } else {
+ return CMD_RET_USAGE;
+ }
+
+ return 0;
+
+err:
+ puts("ERROR\n");
+ return ret;
+}
+
+U_BOOT_CMD(
+ fuse, CONFIG_SYS_MAXARGS, 0, do_fuse,
+ "Fuse sub-system",
+ "read <bank> <word> [<cnt>] - read 1 or 'cnt' fuse words,\n"
+ " starting at 'word'\n"
+ "fuse sense <bank> <word> [<cnt>] - sense 1 or 'cnt' fuse words,\n"
+ " starting at 'word'\n"
+ "fuse prog [-y] <bank> <word> <hexval> [<hexval>...] - program 1 or\n"
+ " several fuse words, starting at 'word' (PERMANENT)\n"
+ "fuse override <bank> <word> <hexval> [<hexval>...] - override 1 or\n"
+ " several fuse words, starting at 'word'"
+);
diff --git a/common/cmd_immap.c b/common/cmd_immap.c
index fdf9489..bb15795 100644
--- a/common/cmd_immap.c
+++ b/common/cmd_immap.c
@@ -535,7 +535,7 @@
volatile iic_t *iip;
uint dpaddr;
- dpaddr = *((unsigned short *) (&immap->im_dprambase[PROFF_I2C_BASE]));
+ dpaddr = immap->im_dprambase16[PROFF_I2C_BASE / sizeof(u16)];
if (dpaddr == 0)
iip = NULL;
else
diff --git a/common/cmd_mem.c b/common/cmd_mem.c
index 64dd76a..6df00b1 100644
--- a/common/cmd_mem.c
+++ b/common/cmd_mem.c
@@ -445,7 +445,7 @@
#endif
bytes = size * count;
- buf = map_sysmem(addr, bytes);
+ buf = map_sysmem(dest, bytes);
src = map_sysmem(addr, bytes);
while (count-- > 0) {
if (size == 4)
diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index e9d3d3c..8b1e01a 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -62,8 +62,8 @@
ops.oobbuf = oobbuf;
ops.len = nand->writesize;
ops.ooblen = nand->oobsize;
- ops.mode = MTD_OOB_RAW;
- i = nand->read_oob(nand, addr, &ops);
+ ops.mode = MTD_OPS_RAW;
+ i = mtd_read_oob(nand, addr, &ops);
if (i < 0) {
printf("Error (%d) reading page %08lx\n", i, off);
free(datbuf);
@@ -404,13 +404,13 @@
.oobbuf = ((u8 *)addr) + nand->writesize,
.len = nand->writesize,
.ooblen = nand->oobsize,
- .mode = MTD_OOB_RAW
+ .mode = MTD_OPS_RAW
};
if (read)
- ret = nand->read_oob(nand, off, &ops);
+ ret = mtd_read_oob(nand, off, &ops);
else
- ret = nand->write_oob(nand, off, &ops);
+ ret = mtd_write_oob(nand, off, &ops);
if (ret) {
printf("%s: error at offset %llx, ret %d\n",
@@ -425,6 +425,31 @@
return ret;
}
+/* Adjust a chip/partition size down for bad blocks so we don't
+ * read/write/erase past the end of a chip/partition by accident.
+ */
+static void adjust_size_for_badblocks(loff_t *size, loff_t offset, int dev)
+{
+ /* We grab the nand info object here fresh because this is usually
+ * called after arg_off_size() which can change the value of dev.
+ */
+ nand_info_t *nand = &nand_info[dev];
+ loff_t maxoffset = offset + *size;
+ int badblocks = 0;
+
+ /* count badblocks in NAND from offset to offset + size */
+ for (; offset < maxoffset; offset += nand->erasesize) {
+ if (nand_block_isbad(nand, offset))
+ badblocks++;
+ }
+ /* adjust size if any bad blocks found */
+ if (badblocks) {
+ *size -= badblocks * nand->erasesize;
+ printf("size adjusted to 0x%llx (%d bad blocks)\n",
+ (unsigned long long)*size, badblocks);
+ }
+}
+
static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int i, ret = 0;
@@ -521,6 +546,7 @@
int scrub = !strncmp(cmd, "scrub", 5);
int spread = 0;
int args = 2;
+ int adjust_size = 0;
const char *scrub_warn =
"Warning: "
"scrub option will erase all factory set bad blocks!\n"
@@ -537,8 +563,10 @@
spread = 1;
} else if (!strcmp(&cmd[5], ".part")) {
args = 1;
+ adjust_size = 1;
} else if (!strcmp(&cmd[5], ".chip")) {
args = 0;
+ adjust_size = 1;
} else {
goto usage;
}
@@ -558,6 +586,10 @@
&maxsize) != 0)
return 1;
+ /* size is unspecified */
+ if (adjust_size && !scrub)
+ adjust_size_for_badblocks(&size, off, dev);
+
nand = &nand_info[dev];
memset(&opts, 0, sizeof(opts));
@@ -642,6 +674,9 @@
&off, &size, &maxsize) != 0)
return 1;
+ /* size is unspecified */
+ if (argc < 5)
+ adjust_size_for_badblocks(&size, off, dev);
rwsize = size;
}
@@ -680,13 +715,13 @@
mtd_oob_ops_t ops = {
.oobbuf = (u8 *)addr,
.ooblen = rwsize,
- .mode = MTD_OOB_RAW
+ .mode = MTD_OPS_RAW
};
if (read)
- ret = nand->read_oob(nand, off, &ops);
+ ret = mtd_read_oob(nand, off, &ops);
else
- ret = nand->write_oob(nand, off, &ops);
+ ret = mtd_write_oob(nand, off, &ops);
} else if (raw) {
ret = raw_access(nand, addr, off, pagecount, read);
} else {
@@ -729,7 +764,7 @@
while (argc > 0) {
addr = simple_strtoul(*argv, NULL, 16);
- if (nand->block_markbad(nand, addr)) {
+ if (mtd_block_markbad(nand, addr)) {
printf("block 0x%08lx NOT marked "
"as bad! ERROR %d\n",
addr, ret);
diff --git a/common/cmd_onenand.c b/common/cmd_onenand.c
index a0d25e5..06cc140 100644
--- a/common/cmd_onenand.c
+++ b/common/cmd_onenand.c
@@ -83,7 +83,7 @@
ops.len = blocksize;
while (blocks) {
- ret = mtd->block_isbad(mtd, ofs);
+ ret = mtd_block_isbad(mtd, ofs);
if (ret) {
printk("Bad blocks %d at 0x%x\n",
(u32)(ofs >> this->erase_shift), (u32)ofs);
@@ -97,7 +97,7 @@
ops.datbuf = buf;
ops.retlen = 0;
- ret = mtd->read_oob(mtd, ofs, &ops);
+ ret = mtd_read_oob(mtd, ofs, &ops);
if (ret) {
printk("Read failed 0x%x, %d\n", (u32)ofs, ret);
ofs += blocksize;
@@ -118,7 +118,7 @@
struct mtd_oob_ops ops = {
.len = mtd->writesize,
.ooblen = mtd->oobsize,
- .mode = MTD_OOB_AUTO,
+ .mode = MTD_OPS_AUTO_OOB,
};
int page, ret = 0;
for (page = 0; page < (mtd->erasesize / mtd->writesize); page ++) {
@@ -126,7 +126,7 @@
buf += mtd->writesize;
ops.oobbuf = (u_char *)buf;
buf += mtd->oobsize;
- ret = mtd->write_oob(mtd, to, &ops);
+ ret = mtd_write_oob(mtd, to, &ops);
if (ret)
break;
to += mtd->writesize;
@@ -156,7 +156,7 @@
ofs = to;
while (blocks) {
- ret = mtd->block_isbad(mtd, ofs);
+ ret = mtd_block_isbad(mtd, ofs);
if (ret) {
printk("Bad blocks %d at 0x%x\n",
(u32)(ofs >> this->erase_shift), (u32)ofs);
@@ -165,7 +165,7 @@
}
if (!withoob)
- ret = mtd->write(mtd, ofs, blocksize, &_retlen, buf);
+ ret = mtd_write(mtd, ofs, blocksize, &_retlen, buf);
else
ret = onenand_write_oneblock_withoob(ofs, buf, &_retlen);
if (ret) {
@@ -195,7 +195,7 @@
int blocksize = 1 << this->erase_shift;
for (ofs = start; ofs < (start + size); ofs += blocksize) {
- ret = mtd->block_isbad(mtd, ofs);
+ ret = mtd_block_isbad(mtd, ofs);
if (ret && !force) {
printf("Skip erase bad block %d at 0x%x\n",
(u32)(ofs >> this->erase_shift), (u32)ofs);
@@ -206,7 +206,7 @@
instr.len = blocksize;
instr.priv = force;
instr.mtd = mtd;
- ret = mtd->erase(mtd, &instr);
+ ret = mtd_erase(mtd, &instr);
if (ret) {
printf("erase failed block %d at 0x%x\n",
(u32)(ofs >> this->erase_shift), (u32)ofs);
@@ -261,7 +261,7 @@
while (blocks < end_block) {
printf("\rTesting block %d at 0x%x", (u32)(ofs >> this->erase_shift), (u32)ofs);
- ret = mtd->block_isbad(mtd, ofs);
+ ret = mtd_block_isbad(mtd, ofs);
if (ret) {
printf("Skip erase bad block %d at 0x%x\n",
(u32)(ofs >> this->erase_shift), (u32)ofs);
@@ -270,19 +270,19 @@
instr.addr = ofs;
instr.len = blocksize;
- ret = mtd->erase(mtd, &instr);
+ ret = mtd_erase(mtd, &instr);
if (ret) {
printk("Erase failed 0x%x, %d\n", (u32)ofs, ret);
goto next;
}
- ret = mtd->write(mtd, ofs, blocksize, &retlen, buf);
+ ret = mtd_write(mtd, ofs, blocksize, &retlen, buf);
if (ret) {
printk("Write failed 0x%x, %d\n", (u32)ofs, ret);
goto next;
}
- ret = mtd->read(mtd, ofs, blocksize, &retlen, verify_buf);
+ ret = mtd_read(mtd, ofs, blocksize, &retlen, verify_buf);
if (ret) {
printk("Read failed 0x%x, %d\n", (u32)ofs, ret);
goto next;
@@ -324,7 +324,7 @@
ops.len = mtd->writesize;
ops.ooblen = mtd->oobsize;
ops.retlen = 0;
- i = mtd->read_oob(mtd, addr, &ops);
+ i = mtd_read_oob(mtd, addr, &ops);
if (i < 0) {
printf("Error (%d) reading page %08lx\n", i, off);
free(datbuf);
@@ -373,7 +373,7 @@
/* Currently only one OneNAND device is supported */
printf("\nDevice %d bad blocks:\n", 0);
for (ofs = 0; ofs < mtd->size; ofs += mtd->erasesize) {
- if (mtd->block_isbad(mtd, ofs))
+ if (mtd_block_isbad(mtd, ofs))
printf(" %08x\n", (u32)ofs);
}
@@ -530,7 +530,7 @@
while (argc > 0) {
addr = simple_strtoul(*argv, NULL, 16);
- if (mtd->block_markbad(mtd, addr)) {
+ if (mtd_block_markbad(mtd, addr)) {
printf("block 0x%08lx NOT marked "
"as bad! ERROR %d\n",
addr, ret);
diff --git a/common/env_onenand.c b/common/env_onenand.c
index faa903d..e8bde37 100644
--- a/common/env_onenand.c
+++ b/common/env_onenand.c
@@ -68,7 +68,7 @@
/* Check OneNAND exist */
if (mtd->writesize)
/* Ignore read fail */
- mtd->read(mtd, env_addr, ONENAND_MAX_ENV_SIZE,
+ mtd_read(mtd, env_addr, ONENAND_MAX_ENV_SIZE,
&retlen, (u_char *)buf);
else
mtd->writesize = MAX_ONENAND_PAGESIZE;
@@ -113,12 +113,12 @@
#endif
instr.addr = env_addr;
instr.mtd = mtd;
- if (mtd->erase(mtd, &instr)) {
+ if (mtd_erase(mtd, &instr)) {
printf("OneNAND: erase failed at 0x%08llx\n", env_addr);
return 1;
}
- if (mtd->write(mtd, env_addr, ONENAND_MAX_ENV_SIZE, &retlen,
+ if (mtd_write(mtd, env_addr, ONENAND_MAX_ENV_SIZE, &retlen,
(u_char *)&env_new)) {
printf("OneNAND: write failed at 0x%llx\n", instr.addr);
return 2;
diff --git a/common/fdt_support.c b/common/fdt_support.c
index 812acb4..9a6f6b7 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -387,7 +387,11 @@
}
}
+#ifdef CONFIG_NR_DRAM_BANKS
+#define MEMORY_BANKS_MAX CONFIG_NR_DRAM_BANKS
+#else
#define MEMORY_BANKS_MAX 4
+#endif
int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks)
{
int err, nodeoffset;
@@ -454,7 +458,7 @@
{
int node, i, j;
char enet[16], *tmp, *end;
- char mac[16] = "ethaddr";
+ char mac[16];
const char *path;
unsigned char mac_addr[6];
@@ -463,6 +467,7 @@
return;
i = 0;
+ strcpy(mac, "ethaddr");
while ((tmp = getenv(mac)) != NULL) {
sprintf(enet, "ethernet%d", i);
path = fdt_getprop(fdt, node, enet, NULL);
diff --git a/common/image-fdt.c b/common/image-fdt.c
index 158c9cf..0d421d9 100644
--- a/common/image-fdt.c
+++ b/common/image-fdt.c
@@ -211,51 +211,11 @@
return 1;
}
-#if defined(CONFIG_FIT)
-/**
- * fit_check_fdt - verify FIT format FDT subimage
- * @fit_hdr: pointer to the FIT header
- * fdt_noffset: FDT subimage node offset within FIT image
- * @verify: data CRC verification flag
- *
- * fit_check_fdt() verifies integrity of the FDT subimage and from
- * specified FIT image.
- *
- * returns:
- * 1, on success
- * 0, on failure
- */
-static int fit_check_fdt(const void *fit, int fdt_noffset, int verify)
-{
- fit_image_print(fit, fdt_noffset, " ");
-
- if (verify) {
- puts(" Verifying Hash Integrity ... ");
- if (!fit_image_verify(fit, fdt_noffset)) {
- fdt_error("Bad Data Hash");
- return 0;
- }
- puts("OK\n");
- }
-
- if (!fit_image_check_type(fit, fdt_noffset, IH_TYPE_FLATDT)) {
- fdt_error("Not a FDT image");
- return 0;
- }
-
- if (!fit_image_check_comp(fit, fdt_noffset, IH_COMP_NONE)) {
- fdt_error("FDT image is compressed");
- return 0;
- }
-
- return 1;
-}
-#endif
-
/**
* boot_get_fdt - main fdt handling routine
* @argc: command argument count
* @argv: command argument list
+ * @arch: architecture (IH_ARCH_...)
* @images: pointer to the bootm images structure
* @of_flat_tree: pointer to a char* variable, will hold fdt start address
* @of_size: pointer to a ulong variable, will hold fdt length
@@ -273,24 +233,20 @@
* 1, if fdt image is found but corrupted
* of_flat_tree and of_size are set to 0 if no fdt exists
*/
-int boot_get_fdt(int flag, int argc, char * const argv[],
+int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch,
bootm_headers_t *images, char **of_flat_tree, ulong *of_size)
{
const image_header_t *fdt_hdr;
ulong fdt_addr;
char *fdt_blob = NULL;
ulong image_start, image_data, image_end;
- ulong load_start, load_end;
+ ulong load, load_end;
void *buf;
#if defined(CONFIG_FIT)
- void *fit_hdr;
const char *fit_uname_config = NULL;
const char *fit_uname_fdt = NULL;
ulong default_addr;
- int cfg_noffset;
int fdt_noffset;
- const void *data;
- size_t size;
#endif
*of_flat_tree = NULL;
@@ -333,31 +289,15 @@
* command argument
*/
fdt_addr = map_to_sysmem(images->fit_hdr_os);
- fit_uname_config = images->fit_uname_cfg;
- debug("* fdt: using config '%s' from image at 0x%08lx\n",
- fit_uname_config, fdt_addr);
-
- /*
- * Check whether configuration has FDT blob defined,
- * if not quit silently.
- */
- fit_hdr = images->fit_hdr_os;
- cfg_noffset = fit_conf_get_node(fit_hdr,
- fit_uname_config);
- if (cfg_noffset < 0) {
- debug("* fdt: no such config\n");
+ fdt_noffset = fit_get_node_from_config(images,
+ FIT_FDT_PROP,
+ fdt_addr);
+ if (fdt_noffset == -ENOLINK)
return 0;
- }
-
- fdt_noffset = fit_conf_get_fdt_node(fit_hdr,
- cfg_noffset);
- if (fdt_noffset < 0) {
- debug("* fdt: no fdt in config\n");
- return 0;
- }
+ else if (fdt_noffset < 0)
+ return 1;
}
#endif
-
debug("## Checking for 'FDT'/'FDT Image' at %08lx\n",
fdt_addr);
@@ -387,29 +327,28 @@
image_data = (ulong)image_get_data(fdt_hdr);
image_end = image_get_image_end(fdt_hdr);
- load_start = image_get_load(fdt_hdr);
- load_end = load_start + image_get_data_size(fdt_hdr);
+ load = image_get_load(fdt_hdr);
+ load_end = load + image_get_data_size(fdt_hdr);
- if (load_start == image_start ||
- load_start == image_data) {
+ if (load == image_start ||
+ load == image_data) {
fdt_blob = (char *)image_data;
break;
}
- if ((load_start < image_end) &&
- (load_end > image_start)) {
+ if ((load < image_end) && (load_end > image_start)) {
fdt_error("fdt overwritten");
goto error;
}
debug(" Loading FDT from 0x%08lx to 0x%08lx\n",
- image_data, load_start);
+ image_data, load);
- memmove((void *)load_start,
+ memmove((void *)load,
(void *)image_data,
image_get_data_size(fdt_hdr));
- fdt_blob = (char *)load_start;
+ fdt_addr = load;
break;
case IMAGE_FORMAT_FIT:
/*
@@ -420,107 +359,20 @@
#if defined(CONFIG_FIT)
/* check FDT blob vs FIT blob */
if (fit_check_format(buf)) {
- /*
- * FIT image
- */
- fit_hdr = buf;
- printf("## Flattened Device Tree from FIT Image at %08lx\n",
- fdt_addr);
+ ulong load, len;
- if (!fit_uname_fdt) {
- /*
- * no FDT blob image node unit name,
- * try to get config node first. If
- * config unit node name is NULL
- * fit_conf_get_node() will try to
- * find default config node
- */
- cfg_noffset = fit_conf_get_node(fit_hdr,
- fit_uname_config);
+ fdt_noffset = fit_image_load(images,
+ FIT_FDT_PROP,
+ fdt_addr, &fit_uname_fdt,
+ fit_uname_config,
+ arch, IH_TYPE_FLATDT,
+ BOOTSTAGE_ID_FIT_FDT_START,
+ FIT_LOAD_OPTIONAL, &load, &len);
- if (cfg_noffset < 0) {
- fdt_error("Could not find configuration node\n");
- goto error;
- }
-
- fit_uname_config = fdt_get_name(fit_hdr,
- cfg_noffset, NULL);
- printf(" Using '%s' configuration\n",
- fit_uname_config);
-
- fdt_noffset = fit_conf_get_fdt_node(
- fit_hdr,
- cfg_noffset);
- fit_uname_fdt = fit_get_name(fit_hdr,
- fdt_noffset, NULL);
- } else {
- /*
- * get FDT component image node
- * offset
- */
- fdt_noffset = fit_image_get_node(
- fit_hdr,
- fit_uname_fdt);
- }
- if (fdt_noffset < 0) {
- fdt_error("Could not find subimage node\n");
- goto error;
- }
-
- printf(" Trying '%s' FDT blob subimage\n",
- fit_uname_fdt);
-
- if (!fit_check_fdt(fit_hdr, fdt_noffset,
- images->verify))
- goto error;
-
- /* get ramdisk image data address and length */
- if (fit_image_get_data(fit_hdr, fdt_noffset,
- &data, &size)) {
- fdt_error("Could not find FDT subimage data");
- goto error;
- }
-
- /*
- * verify that image data is a proper FDT
- * blob
- */
- if (fdt_check_header((char *)data) != 0) {
- fdt_error("Subimage data is not a FTD");
- goto error;
- }
-
- /*
- * move image data to the load address,
- * make sure we don't overwrite initial image
- */
- image_start = (ulong)fit_hdr;
- image_end = fit_get_end(fit_hdr);
-
- if (fit_image_get_load(fit_hdr, fdt_noffset,
- &load_start) == 0) {
- load_end = load_start + size;
-
- if ((load_start < image_end) &&
- (load_end > image_start)) {
- fdt_error("FDT overwritten");
- goto error;
- }
-
- printf(" Loading FDT from 0x%08lx to 0x%08lx\n",
- (ulong)data, load_start);
-
- memmove((void *)load_start,
- (void *)data, size);
-
- fdt_blob = (char *)load_start;
- } else {
- fdt_blob = (char *)data;
- }
-
- images->fit_hdr_fdt = fit_hdr;
+ images->fit_hdr_fdt = map_sysmem(fdt_addr, 0);
images->fit_uname_fdt = fit_uname_fdt;
images->fit_noffset_fdt = fdt_noffset;
+ fdt_addr = load;
break;
} else
#endif
@@ -528,7 +380,6 @@
/*
* FDT blob
*/
- fdt_blob = buf;
debug("* fdt: raw FDT blob\n");
printf("## Flattened Device Tree blob at %08lx\n",
(long)fdt_addr);
@@ -539,8 +390,8 @@
goto error;
}
- printf(" Booting using the fdt blob at 0x%p\n", fdt_blob);
-
+ printf(" Booting using the fdt blob at %#08lx\n", fdt_addr);
+ fdt_blob = map_sysmem(fdt_addr, 0);
} else if (images->legacy_hdr_valid &&
image_check_type(&images->legacy_hdr_os_copy,
IH_TYPE_MULTI)) {
diff --git a/common/image-fit.c b/common/image-fit.c
index 254feec..7bf82d3 100644
--- a/common/image-fit.c
+++ b/common/image-fit.c
@@ -31,6 +31,9 @@
#include <time.h>
#else
#include <common.h>
+#include <errno.h>
+#include <asm/io.h>
+DECLARE_GLOBAL_DATA_PTR;
#endif /* !USE_HOSTCC*/
#include <bootstage.h>
@@ -348,10 +351,13 @@
#ifndef USE_HOSTCC
printf("%s Data Start: ", p);
- if (ret)
+ if (ret) {
printf("unavailable\n");
- else
- printf("0x%08lx\n", (ulong)data);
+ } else {
+ void *vdata = (void *)data;
+
+ printf("0x%08lx\n", (ulong)map_to_sysmem(vdata));
+ }
#endif
printf("%s Data Size: ", p);
@@ -1349,63 +1355,6 @@
}
/**
- * fit_conf_get_kernel_node - get kernel image node offset that corresponds to
- * a given configuration
- * @fit: pointer to the FIT format image header
- * @noffset: configuration node offset
- *
- * fit_conf_get_kernel_node() retrives kernel image node unit name from
- * configuration FIT_KERNEL_PROP property and translates it to the node
- * offset.
- *
- * returns:
- * image node offset when found (>=0)
- * negative number on failure (FDT_ERR_* code)
- */
-int fit_conf_get_kernel_node(const void *fit, int noffset)
-{
- return fit_conf_get_prop_node(fit, noffset, FIT_KERNEL_PROP);
-}
-
-/**
- * fit_conf_get_ramdisk_node - get ramdisk image node offset that corresponds to
- * a given configuration
- * @fit: pointer to the FIT format image header
- * @noffset: configuration node offset
- *
- * fit_conf_get_ramdisk_node() retrives ramdisk image node unit name from
- * configuration FIT_KERNEL_PROP property and translates it to the node
- * offset.
- *
- * returns:
- * image node offset when found (>=0)
- * negative number on failure (FDT_ERR_* code)
- */
-int fit_conf_get_ramdisk_node(const void *fit, int noffset)
-{
- return fit_conf_get_prop_node(fit, noffset, FIT_RAMDISK_PROP);
-}
-
-/**
- * fit_conf_get_fdt_node - get fdt image node offset that corresponds to
- * a given configuration
- * @fit: pointer to the FIT format image header
- * @noffset: configuration node offset
- *
- * fit_conf_get_fdt_node() retrives fdt image node unit name from
- * configuration FIT_KERNEL_PROP property and translates it to the node
- * offset.
- *
- * returns:
- * image node offset when found (>=0)
- * negative number on failure (FDT_ERR_* code)
- */
-int fit_conf_get_fdt_node(const void *fit, int noffset)
-{
- return fit_conf_get_prop_node(fit, noffset, FIT_FDT_PROP);
-}
-
-/**
* fit_conf_print - prints out the FIT configuration details
* @fit: pointer to the FIT format image header
* @noffset: offset of the configuration node
@@ -1448,22 +1397,7 @@
printf("%s FDT: %s\n", p, uname);
}
-/**
- * fit_check_ramdisk - verify FIT format ramdisk subimage
- * @fit_hdr: pointer to the FIT ramdisk header
- * @rd_noffset: ramdisk subimage node offset within FIT image
- * @arch: requested ramdisk image architecture type
- * @verify: data CRC verification flag
- *
- * fit_check_ramdisk() verifies integrity of the ramdisk subimage and from
- * specified FIT image.
- *
- * returns:
- * 1, on success
- * 0, on failure
- */
-int fit_check_ramdisk(const void *fit, int rd_noffset, uint8_t arch,
- int verify)
+int fit_image_select(const void *fit, int rd_noffset, int verify)
{
fit_image_print(fit, rd_noffset, " ");
@@ -1471,22 +1405,222 @@
puts(" Verifying Hash Integrity ... ");
if (!fit_image_verify(fit, rd_noffset)) {
puts("Bad Data Hash\n");
- bootstage_error(BOOTSTAGE_ID_FIT_RD_HASH);
- return 0;
+ return -EACCES;
}
puts("OK\n");
}
- bootstage_mark(BOOTSTAGE_ID_FIT_RD_CHECK_ALL);
- if (!fit_image_check_os(fit, rd_noffset, IH_OS_LINUX) ||
- !fit_image_check_arch(fit, rd_noffset, arch) ||
- !fit_image_check_type(fit, rd_noffset, IH_TYPE_RAMDISK)) {
- printf("No Linux %s Ramdisk Image\n",
- genimg_get_arch_name(arch));
- bootstage_error(BOOTSTAGE_ID_FIT_RD_CHECK_ALL);
- return 0;
+ return 0;
+}
+
+int fit_get_node_from_config(bootm_headers_t *images, const char *prop_name,
+ ulong addr)
+{
+ int cfg_noffset;
+ void *fit_hdr;
+ int noffset;
+
+ debug("* %s: using config '%s' from image at 0x%08lx\n",
+ prop_name, images->fit_uname_cfg, addr);
+
+ /* Check whether configuration has this property defined */
+ fit_hdr = map_sysmem(addr, 0);
+ cfg_noffset = fit_conf_get_node(fit_hdr, images->fit_uname_cfg);
+ if (cfg_noffset < 0) {
+ debug("* %s: no such config\n", prop_name);
+ return -ENOENT;
}
- bootstage_mark(BOOTSTAGE_ID_FIT_RD_CHECK_ALL_OK);
- return 1;
+ noffset = fit_conf_get_prop_node(fit_hdr, cfg_noffset, prop_name);
+ if (noffset < 0) {
+ debug("* %s: no '%s' in config\n", prop_name, prop_name);
+ return -ENOLINK;
+ }
+
+ return noffset;
+}
+
+int fit_image_load(bootm_headers_t *images, const char *prop_name, ulong addr,
+ const char **fit_unamep, const char *fit_uname_config,
+ int arch, int image_type, int bootstage_id,
+ enum fit_load_op load_op, ulong *datap, ulong *lenp)
+{
+ int cfg_noffset, noffset;
+ const char *fit_uname;
+ const void *fit;
+ const void *buf;
+ size_t size;
+ int type_ok, os_ok;
+ ulong load, data, len;
+ int ret;
+
+ fit = map_sysmem(addr, 0);
+ fit_uname = fit_unamep ? *fit_unamep : NULL;
+ printf("## Loading %s from FIT Image at %08lx ...\n", prop_name, addr);
+
+ bootstage_mark(bootstage_id + BOOTSTAGE_SUB_FORMAT);
+ if (!fit_check_format(fit)) {
+ printf("Bad FIT %s image format!\n", prop_name);
+ bootstage_error(bootstage_id + BOOTSTAGE_SUB_FORMAT);
+ return -ENOEXEC;
+ }
+ bootstage_mark(bootstage_id + BOOTSTAGE_SUB_FORMAT_OK);
+ if (fit_uname) {
+ /* get ramdisk component image node offset */
+ bootstage_mark(bootstage_id + BOOTSTAGE_SUB_UNIT_NAME);
+ noffset = fit_image_get_node(fit, fit_uname);
+ } else {
+ /*
+ * no image node unit name, try to get config
+ * node first. If config unit node name is NULL
+ * fit_conf_get_node() will try to find default config node
+ */
+ bootstage_mark(bootstage_id + BOOTSTAGE_SUB_NO_UNIT_NAME);
+ if (IMAGE_ENABLE_BEST_MATCH && !fit_uname_config) {
+ cfg_noffset = fit_conf_find_compat(fit, gd_fdt_blob());
+ } else {
+ cfg_noffset = fit_conf_get_node(fit,
+ fit_uname_config);
+ }
+ if (cfg_noffset < 0) {
+ puts("Could not find configuration node\n");
+ bootstage_error(bootstage_id +
+ BOOTSTAGE_SUB_NO_UNIT_NAME);
+ return -ENOENT;
+ }
+ fit_uname_config = fdt_get_name(fit, cfg_noffset, NULL);
+ printf(" Using '%s' configuration\n", fit_uname_config);
+ if (image_type == IH_TYPE_KERNEL) {
+ /* Remember (and possibly verify) this config */
+ images->fit_uname_cfg = fit_uname_config;
+ if (IMAGE_ENABLE_VERIFY && images->verify) {
+ puts(" Verifying Hash Integrity ... ");
+ if (!fit_config_verify(fit, cfg_noffset)) {
+ puts("Bad Data Hash\n");
+ bootstage_error(bootstage_id +
+ BOOTSTAGE_SUB_HASH);
+ return -EACCES;
+ }
+ puts("OK\n");
+ }
+ bootstage_mark(BOOTSTAGE_ID_FIT_CONFIG);
+ }
+
+ noffset = fit_conf_get_prop_node(fit, cfg_noffset,
+ prop_name);
+ fit_uname = fit_get_name(fit, noffset, NULL);
+ }
+ if (noffset < 0) {
+ puts("Could not find subimage node\n");
+ bootstage_error(bootstage_id + BOOTSTAGE_SUB_SUBNODE);
+ return -ENOENT;
+ }
+
+ printf(" Trying '%s' %s subimage\n", fit_uname, prop_name);
+
+ ret = fit_image_select(fit, noffset, images->verify);
+ if (ret) {
+ bootstage_error(bootstage_id + BOOTSTAGE_SUB_HASH);
+ return ret;
+ }
+
+ bootstage_mark(bootstage_id + BOOTSTAGE_SUB_CHECK_ARCH);
+ if (!fit_image_check_target_arch(fit, noffset)) {
+ puts("Unsupported Architecture\n");
+ bootstage_error(bootstage_id + BOOTSTAGE_SUB_CHECK_ARCH);
+ return -ENOEXEC;
+ }
+
+ if (image_type == IH_TYPE_FLATDT &&
+ !fit_image_check_comp(fit, noffset, IH_COMP_NONE)) {
+ puts("FDT image is compressed");
+ return -EPROTONOSUPPORT;
+ }
+
+ bootstage_mark(bootstage_id + BOOTSTAGE_SUB_CHECK_ALL);
+ type_ok = fit_image_check_type(fit, noffset, image_type) ||
+ (image_type == IH_TYPE_KERNEL &&
+ fit_image_check_type(fit, noffset,
+ IH_TYPE_KERNEL_NOLOAD));
+ os_ok = image_type == IH_TYPE_FLATDT ||
+ fit_image_check_os(fit, noffset, IH_OS_LINUX);
+ if (!type_ok || !os_ok) {
+ printf("No Linux %s %s Image\n", genimg_get_arch_name(arch),
+ genimg_get_type_name(image_type));
+ bootstage_error(bootstage_id + BOOTSTAGE_SUB_CHECK_ALL);
+ return -EIO;
+ }
+
+ bootstage_mark(bootstage_id + BOOTSTAGE_SUB_CHECK_ALL_OK);
+
+ /* get image data address and length */
+ if (fit_image_get_data(fit, noffset, &buf, &size)) {
+ printf("Could not find %s subimage data!\n", prop_name);
+ bootstage_error(bootstage_id + BOOTSTAGE_SUB_GET_DATA);
+ return -ENOMEDIUM;
+ }
+ len = (ulong)size;
+
+ /* verify that image data is a proper FDT blob */
+ if (image_type == IH_TYPE_FLATDT && fdt_check_header((char *)buf)) {
+ puts("Subimage data is not a FDT");
+ return -ENOEXEC;
+ }
+
+ bootstage_mark(bootstage_id + BOOTSTAGE_SUB_GET_DATA_OK);
+
+ /*
+ * Work-around for eldk-4.2 which gives this warning if we try to
+ * case in the unmap_sysmem() call:
+ * warning: initialization discards qualifiers from pointer target type
+ */
+ {
+ void *vbuf = (void *)buf;
+
+ data = map_to_sysmem(vbuf);
+ }
+
+ if (load_op == FIT_LOAD_IGNORED) {
+ /* Don't load */
+ } else if (fit_image_get_load(fit, noffset, &load)) {
+ if (load_op == FIT_LOAD_REQUIRED) {
+ printf("Can't get %s subimage load address!\n",
+ prop_name);
+ bootstage_error(bootstage_id + BOOTSTAGE_SUB_LOAD);
+ return -EBADF;
+ }
+ } else {
+ ulong image_start, image_end;
+ ulong load_end;
+ void *dst;
+
+ /*
+ * move image data to the load address,
+ * make sure we don't overwrite initial image
+ */
+ image_start = addr;
+ image_end = addr + fit_get_size(fit);
+
+ load_end = load + len;
+ if (image_type != IH_TYPE_KERNEL &&
+ load < image_end && load_end > image_start) {
+ printf("Error: %s overwritten\n", prop_name);
+ return -EXDEV;
+ }
+
+ printf(" Loading %s from 0x%08lx to 0x%08lx\n",
+ prop_name, data, load);
+
+ dst = map_sysmem(load, len);
+ memmove(dst, buf, len);
+ data = load;
+ }
+ bootstage_mark(bootstage_id + BOOTSTAGE_SUB_LOAD);
+
+ *datap = data;
+ *lenp = len;
+ if (fit_unamep)
+ *fit_unamep = (char *)fit_uname;
+
+ return noffset;
}
diff --git a/common/image.c b/common/image.c
index e91c89e..f863502 100644
--- a/common/image.c
+++ b/common/image.c
@@ -51,6 +51,7 @@
#include <u-boot/md5.h>
#include <sha1.h>
+#include <asm/errno.h>
#include <asm/io.h>
#ifdef CONFIG_CMD_BDI
@@ -810,14 +811,10 @@
char *end;
#endif
#if defined(CONFIG_FIT)
- void *fit_hdr;
const char *fit_uname_config = NULL;
const char *fit_uname_ramdisk = NULL;
ulong default_addr;
int rd_noffset;
- int cfg_noffset;
- const void *data;
- size_t size;
#endif
*rd_start = 0;
@@ -865,32 +862,16 @@
#if defined(CONFIG_FIT)
} else {
/* use FIT configuration provided in first bootm
- * command argument
+ * command argument. If the property is not defined,
+ * quit silently.
*/
rd_addr = map_to_sysmem(images->fit_hdr_os);
- fit_uname_config = images->fit_uname_cfg;
- debug("* ramdisk: using config '%s' from image "
- "at 0x%08lx\n",
- fit_uname_config, rd_addr);
-
- /*
- * Check whether configuration has ramdisk defined,
- * if not, don't try to use it, quit silently.
- */
- fit_hdr = images->fit_hdr_os;
- cfg_noffset = fit_conf_get_node(fit_hdr,
- fit_uname_config);
- if (cfg_noffset < 0) {
- debug("* ramdisk: no such config\n");
- return 1;
- }
-
- rd_noffset = fit_conf_get_ramdisk_node(fit_hdr,
- cfg_noffset);
- if (rd_noffset < 0) {
- debug("* ramdisk: no ramdisk in config\n");
+ rd_noffset = fit_get_node_from_config(images,
+ FIT_RAMDISK_PROP, rd_addr);
+ if (rd_noffset == -ENOLINK)
return 0;
- }
+ else if (rd_noffset < 0)
+ return 1;
}
#endif
@@ -921,87 +902,16 @@
break;
#if defined(CONFIG_FIT)
case IMAGE_FORMAT_FIT:
- fit_hdr = buf;
- printf("## Loading init Ramdisk from FIT "
- "Image at %08lx ...\n", rd_addr);
-
- bootstage_mark(BOOTSTAGE_ID_FIT_RD_FORMAT);
- if (!fit_check_format(fit_hdr)) {
- puts("Bad FIT ramdisk image format!\n");
- bootstage_error(
- BOOTSTAGE_ID_FIT_RD_FORMAT);
- return 1;
- }
- bootstage_mark(BOOTSTAGE_ID_FIT_RD_FORMAT_OK);
-
- if (!fit_uname_ramdisk) {
- /*
- * no ramdisk image node unit name, try to get config
- * node first. If config unit node name is NULL
- * fit_conf_get_node() will try to find default config node
- */
- bootstage_mark(
- BOOTSTAGE_ID_FIT_RD_NO_UNIT_NAME);
- cfg_noffset = fit_conf_get_node(fit_hdr,
- fit_uname_config);
- if (cfg_noffset < 0) {
- puts("Could not find configuration "
- "node\n");
- bootstage_error(
- BOOTSTAGE_ID_FIT_RD_NO_UNIT_NAME);
- return 1;
- }
- fit_uname_config = fdt_get_name(fit_hdr,
- cfg_noffset, NULL);
- printf(" Using '%s' configuration\n",
- fit_uname_config);
-
- rd_noffset = fit_conf_get_ramdisk_node(fit_hdr,
- cfg_noffset);
- fit_uname_ramdisk = fit_get_name(fit_hdr,
- rd_noffset, NULL);
- } else {
- /* get ramdisk component image node offset */
- bootstage_mark(
- BOOTSTAGE_ID_FIT_RD_UNIT_NAME);
- rd_noffset = fit_image_get_node(fit_hdr,
- fit_uname_ramdisk);
- }
- if (rd_noffset < 0) {
- puts("Could not find subimage node\n");
- bootstage_error(BOOTSTAGE_ID_FIT_RD_SUBNODE);
- return 1;
- }
-
- printf(" Trying '%s' ramdisk subimage\n",
- fit_uname_ramdisk);
-
- bootstage_mark(BOOTSTAGE_ID_FIT_RD_CHECK);
- if (!fit_check_ramdisk(fit_hdr, rd_noffset, arch,
- images->verify))
+ rd_noffset = fit_image_load(images, FIT_RAMDISK_PROP,
+ rd_addr, &fit_uname_ramdisk,
+ fit_uname_config, arch,
+ IH_TYPE_RAMDISK,
+ BOOTSTAGE_ID_FIT_RD_START,
+ FIT_LOAD_REQUIRED, &rd_data, &rd_len);
+ if (rd_noffset < 0)
return 1;
- /* get ramdisk image data address and length */
- if (fit_image_get_data(fit_hdr, rd_noffset, &data,
- &size)) {
- puts("Could not find ramdisk subimage data!\n");
- bootstage_error(BOOTSTAGE_ID_FIT_RD_GET_DATA);
- return 1;
- }
- bootstage_mark(BOOTSTAGE_ID_FIT_RD_GET_DATA_OK);
-
- rd_data = (ulong)data;
- rd_len = size;
-
- if (fit_image_get_load(fit_hdr, rd_noffset, &rd_load)) {
- puts("Can't get ramdisk subimage load "
- "address!\n");
- bootstage_error(BOOTSTAGE_ID_FIT_RD_LOAD);
- return 1;
- }
- bootstage_mark(BOOTSTAGE_ID_FIT_RD_LOAD);
-
- images->fit_hdr_rd = fit_hdr;
+ images->fit_hdr_rd = map_sysmem(rd_addr, 0);
images->fit_uname_rd = fit_uname_ramdisk;
images->fit_noffset_rd = rd_noffset;
break;
diff --git a/common/lcd.c b/common/lcd.c
index edae835..3a60484 100644
--- a/common/lcd.c
+++ b/common/lcd.c
@@ -57,6 +57,10 @@
#include <atmel_lcdc.h>
#endif
+#if defined(CONFIG_LCD_DT_SIMPLEFB)
+#include <libfdt.h>
+#endif
+
/************************************************************************/
/* ** FONT DATA */
/************************************************************************/
@@ -1182,3 +1186,86 @@
{
return CONSOLE_COLS;
}
+
+#if defined(CONFIG_LCD_DT_SIMPLEFB)
+static int lcd_dt_simplefb_configure_node(void *blob, int off)
+{
+ u32 stride;
+ fdt32_t cells[2];
+ int ret;
+ const char format[] =
+#if LCD_BPP == LCD_COLOR16
+ "r5g6b5";
+#else
+ "";
+#endif
+
+ if (!format[0])
+ return -1;
+
+ stride = panel_info.vl_col * 2;
+
+ cells[0] = cpu_to_fdt32(gd->fb_base);
+ cells[1] = cpu_to_fdt32(stride * panel_info.vl_row);
+ ret = fdt_setprop(blob, off, "reg", cells, sizeof(cells[0]) * 2);
+ if (ret < 0)
+ return -1;
+
+ cells[0] = cpu_to_fdt32(panel_info.vl_col);
+ ret = fdt_setprop(blob, off, "width", cells, sizeof(cells[0]));
+ if (ret < 0)
+ return -1;
+
+ cells[0] = cpu_to_fdt32(panel_info.vl_row);
+ ret = fdt_setprop(blob, off, "height", cells, sizeof(cells[0]));
+ if (ret < 0)
+ return -1;
+
+ cells[0] = cpu_to_fdt32(stride);
+ ret = fdt_setprop(blob, off, "stride", cells, sizeof(cells[0]));
+ if (ret < 0)
+ return -1;
+
+ ret = fdt_setprop(blob, off, "format", format, strlen(format) + 1);
+ if (ret < 0)
+ return -1;
+
+ ret = fdt_delprop(blob, off, "status");
+ if (ret < 0)
+ return -1;
+
+ return 0;
+}
+
+int lcd_dt_simplefb_add_node(void *blob)
+{
+ const char compat[] = "simple-framebuffer";
+ const char disabled[] = "disabled";
+ int off, ret;
+
+ off = fdt_add_subnode(blob, 0, "framebuffer");
+ if (off < 0)
+ return -1;
+
+ ret = fdt_setprop(blob, off, "status", disabled, sizeof(disabled));
+ if (ret < 0)
+ return -1;
+
+ ret = fdt_setprop(blob, off, "compatible", compat, sizeof(compat));
+ if (ret < 0)
+ return -1;
+
+ return lcd_dt_simplefb_configure_node(blob, off);
+}
+
+int lcd_dt_simplefb_enable_existing_node(void *blob)
+{
+ int off;
+
+ off = fdt_node_offset_by_compatible(blob, -1, "simple-framebuffer");
+ if (off < 0)
+ return -1;
+
+ return lcd_dt_simplefb_configure_node(blob, off);
+}
+#endif
diff --git a/common/main.c b/common/main.c
index 953ef29..56da214 100644
--- a/common/main.c
+++ b/common/main.c
@@ -28,26 +28,15 @@
/* #define DEBUG */
#include <common.h>
-#include <watchdog.h>
#include <command.h>
#include <fdtdec.h>
-#include <malloc.h>
-#include <version.h>
-#ifdef CONFIG_MODEM_SUPPORT
-#include <malloc.h> /* for free() prototype */
-#endif
-
-#ifdef CONFIG_SYS_HUSH_PARSER
#include <hush.h>
-#endif
-
-#ifdef CONFIG_OF_CONTROL
-#include <fdtdec.h>
-#endif
-
-#include <post.h>
-#include <linux/ctype.h>
+#include <malloc.h>
#include <menu.h>
+#include <post.h>
+#include <version.h>
+#include <watchdog.h>
+#include <linux/ctype.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -57,13 +46,18 @@
void inline __show_boot_progress (int val) {}
void show_boot_progress (int val) __attribute__((weak, alias("__show_boot_progress")));
-#if defined(CONFIG_UPDATE_TFTP)
-int update_tftp (ulong addr);
-#endif /* CONFIG_UPDATE_TFTP */
-
#define MAX_DELAY_STOP_STR 32
-#undef DEBUG_PARSER
+#define DEBUG_PARSER 0 /* set to 1 to debug */
+
+#define debug_parser(fmt, args...) \
+ debug_cond(DEBUG_PARSER, fmt, ##args)
+
+#ifndef DEBUG_BOOTKEYS
+#define DEBUG_BOOTKEYS 0
+#endif
+#define debug_bootkeys(fmt, args...) \
+ debug_cond(DEBUG_BOOTKEYS, fmt, ##args)
char console_buffer[CONFIG_SYS_CBSIZE + 1]; /* console I/O buffer */
@@ -93,10 +87,7 @@
*/
#if defined(CONFIG_BOOTDELAY)
# if defined(CONFIG_AUTOBOOT_KEYED)
-#ifndef CONFIG_MENU
-static inline
-#endif
-int abortboot(int bootdelay)
+static int abortboot_keyed(int bootdelay)
{
int abort = 0;
uint64_t etime = endtick(bootdelay);
@@ -152,11 +143,9 @@
presskey_max = presskey_max > delaykey[i].len ?
presskey_max : delaykey[i].len;
-# if DEBUG_BOOTKEYS
- printf("%s key:<%s>\n",
- delaykey[i].retry ? "delay" : "stop",
- delaykey[i].str ? delaykey[i].str : "NULL");
-# endif
+ debug_bootkeys("%s key:<%s>\n",
+ delaykey[i].retry ? "delay" : "stop",
+ delaykey[i].str ? delaykey[i].str : "NULL");
}
/* In order to keep up with incoming data, check timeout only
@@ -181,10 +170,9 @@
memcmp (presskey + presskey_len - delaykey[i].len,
delaykey[i].str,
delaykey[i].len) == 0) {
-# if DEBUG_BOOTKEYS
- printf("got %skey\n",
- delaykey[i].retry ? "delay" : "stop");
-# endif
+ debug_bootkeys("got %skey\n",
+ delaykey[i].retry ? "delay" :
+ "stop");
# ifdef CONFIG_BOOT_RETRY_TIME
/* don't retry auto boot */
@@ -196,10 +184,8 @@
}
} while (!abort && get_ticks() <= etime);
-# if DEBUG_BOOTKEYS
if (!abort)
- puts("key timeout\n");
-# endif
+ debug_bootkeys("key timeout\n");
#ifdef CONFIG_SILENT_CONSOLE
if (abort)
@@ -215,10 +201,7 @@
static int menukey = 0;
#endif
-#ifndef CONFIG_MENU
-static inline
-#endif
-int abortboot(int bootdelay)
+static int abortboot_normal(int bootdelay)
{
int abort = 0;
unsigned long ts;
@@ -275,6 +258,15 @@
return abort;
}
# endif /* CONFIG_AUTOBOOT_KEYED */
+
+static int abortboot(int bootdelay)
+{
+#ifdef CONFIG_AUTOBOOT_KEYED
+ return abortboot_keyed(bootdelay);
+#else
+ return abortboot_normal(bootdelay);
+#endif
+}
#endif /* CONFIG_BOOTDELAY */
/*
@@ -342,93 +334,35 @@
}
#endif /* CONFIG_OF_CONTROL */
-
-/****************************************************************************/
-
-void main_loop (void)
+#ifdef CONFIG_BOOTDELAY
+static void process_boot_delay(void)
{
-#ifndef CONFIG_SYS_HUSH_PARSER
- static char lastcommand[CONFIG_SYS_CBSIZE] = { 0, };
- int len;
- int rc = 1;
- int flag;
-#endif
-#if defined(CONFIG_BOOTDELAY) && defined(CONFIG_OF_CONTROL)
+#ifdef CONFIG_OF_CONTROL
char *env;
#endif
-#if defined(CONFIG_BOOTDELAY)
char *s;
int bootdelay;
-#endif
-#ifdef CONFIG_PREBOOT
- char *p;
-#endif
#ifdef CONFIG_BOOTCOUNT_LIMIT
unsigned long bootcount = 0;
unsigned long bootlimit = 0;
- char *bcs;
- char bcs_set[16];
#endif /* CONFIG_BOOTCOUNT_LIMIT */
- bootstage_mark_name(BOOTSTAGE_ID_MAIN_LOOP, "main_loop");
-
#ifdef CONFIG_BOOTCOUNT_LIMIT
bootcount = bootcount_load();
bootcount++;
bootcount_store (bootcount);
- sprintf (bcs_set, "%lu", bootcount);
- setenv ("bootcount", bcs_set);
- bcs = getenv ("bootlimit");
- bootlimit = bcs ? simple_strtoul (bcs, NULL, 10) : 0;
+ setenv_ulong("bootcount", bootcount);
+ bootlimit = getenv_ulong("bootlimit", 10, 0);
#endif /* CONFIG_BOOTCOUNT_LIMIT */
-#ifdef CONFIG_MODEM_SUPPORT
- debug ("DEBUG: main_loop: do_mdm_init=%d\n", do_mdm_init);
- if (do_mdm_init) {
- char *str = strdup(getenv("mdm_cmd"));
- setenv ("preboot", str); /* set or delete definition */
- if (str != NULL)
- free (str);
- mdm_init(); /* wait for modem connection */
- }
-#endif /* CONFIG_MODEM_SUPPORT */
-
-#ifdef CONFIG_VERSION_VARIABLE
- {
- setenv ("ver", version_string); /* set version variable */
- }
-#endif /* CONFIG_VERSION_VARIABLE */
-
-#ifdef CONFIG_SYS_HUSH_PARSER
- u_boot_hush_start ();
-#endif
-
-#if defined(CONFIG_HUSH_INIT_VAR)
- hush_init_var ();
-#endif
-
-#ifdef CONFIG_PREBOOT
- if ((p = getenv ("preboot")) != NULL) {
-# ifdef CONFIG_AUTOBOOT_KEYED
- int prev = disable_ctrlc(1); /* disable Control C checking */
-# endif
-
- run_command_list(p, -1, 0);
-
-# ifdef CONFIG_AUTOBOOT_KEYED
- disable_ctrlc(prev); /* restore Control C checking */
-# endif
- }
-#endif /* CONFIG_PREBOOT */
-
-#if defined(CONFIG_UPDATE_TFTP)
- update_tftp (0UL);
-#endif /* CONFIG_UPDATE_TFTP */
-
-#if defined(CONFIG_BOOTDELAY)
s = getenv ("bootdelay");
bootdelay = s ? (int)simple_strtol(s, NULL, 10) : CONFIG_BOOTDELAY;
+#ifdef CONFIG_OF_CONTROL
+ bootdelay = fdtdec_get_config_int(gd->fdt_blob, "bootdelay",
+ bootdelay);
+#endif
+
debug ("### main_loop entered: bootdelay=%d\n\n", bootdelay);
#if defined(CONFIG_MENU_SHOW)
@@ -474,26 +408,88 @@
debug ("### main_loop: bootcmd=\"%s\"\n", s ? s : "<UNDEFINED>");
if (bootdelay != -1 && s && !abortboot(bootdelay)) {
-# ifdef CONFIG_AUTOBOOT_KEYED
+#ifdef CONFIG_AUTOBOOT_KEYED
int prev = disable_ctrlc(1); /* disable Control C checking */
-# endif
+#endif
run_command_list(s, -1, 0);
-# ifdef CONFIG_AUTOBOOT_KEYED
+#ifdef CONFIG_AUTOBOOT_KEYED
disable_ctrlc(prev); /* restore Control C checking */
-# endif
+#endif
}
-# ifdef CONFIG_MENUKEY
+#ifdef CONFIG_MENUKEY
if (menukey == CONFIG_MENUKEY) {
s = getenv("menucmd");
if (s)
run_command_list(s, -1, 0);
}
#endif /* CONFIG_MENUKEY */
+}
#endif /* CONFIG_BOOTDELAY */
+void main_loop(void)
+{
+#ifndef CONFIG_SYS_HUSH_PARSER
+ static char lastcommand[CONFIG_SYS_CBSIZE] = { 0, };
+ int len;
+ int rc = 1;
+ int flag;
+#endif
+#ifdef CONFIG_PREBOOT
+ char *p;
+#endif
+
+ bootstage_mark_name(BOOTSTAGE_ID_MAIN_LOOP, "main_loop");
+
+#ifdef CONFIG_MODEM_SUPPORT
+ debug("DEBUG: main_loop: do_mdm_init=%d\n", do_mdm_init);
+ if (do_mdm_init) {
+ char *str = strdup(getenv("mdm_cmd"));
+ setenv("preboot", str); /* set or delete definition */
+ if (str != NULL)
+ free(str);
+ mdm_init(); /* wait for modem connection */
+ }
+#endif /* CONFIG_MODEM_SUPPORT */
+
+#ifdef CONFIG_VERSION_VARIABLE
+ {
+ setenv("ver", version_string); /* set version variable */
+ }
+#endif /* CONFIG_VERSION_VARIABLE */
+
+#ifdef CONFIG_SYS_HUSH_PARSER
+ u_boot_hush_start();
+#endif
+
+#if defined(CONFIG_HUSH_INIT_VAR)
+ hush_init_var();
+#endif
+
+#ifdef CONFIG_PREBOOT
+ p = getenv("preboot");
+ if (p != NULL) {
+# ifdef CONFIG_AUTOBOOT_KEYED
+ int prev = disable_ctrlc(1); /* disable Control C checking */
+# endif
+
+ run_command_list(p, -1, 0);
+
+# ifdef CONFIG_AUTOBOOT_KEYED
+ disable_ctrlc(prev); /* restore Control C checking */
+# endif
+ }
+#endif /* CONFIG_PREBOOT */
+
+#if defined(CONFIG_UPDATE_TFTP)
+ update_tftp(0UL);
+#endif /* CONFIG_UPDATE_TFTP */
+
+#ifdef CONFIG_BOOTDELAY
+ process_boot_delay();
+#endif
/*
* Main Loop for Monitor Command Processing
*/
@@ -1080,20 +1076,20 @@
* Special character handling
*/
switch (c) {
- case '\r': /* Enter */
+ case '\r': /* Enter */
case '\n':
*p = '\0';
puts ("\r\n");
- return (p - p_buf);
+ return p - p_buf;
- case '\0': /* nul */
+ case '\0': /* nul */
continue;
- case 0x03: /* ^C - break */
+ case 0x03: /* ^C - break */
p_buf[0] = '\0'; /* discard input */
- return (-1);
+ return -1;
- case 0x15: /* ^U - erase line */
+ case 0x15: /* ^U - erase line */
while (col > plen) {
puts (erase_seq);
--col;
@@ -1102,15 +1098,15 @@
n = 0;
continue;
- case 0x17: /* ^W - erase word */
+ case 0x17: /* ^W - erase word */
p=delete_char(p_buf, p, &col, &n, plen);
while ((n > 0) && (*p != ' ')) {
p=delete_char(p_buf, p, &col, &n, plen);
}
continue;
- case 0x08: /* ^H - backspace */
- case 0x7F: /* DEL - backspace */
+ case 0x08: /* ^H - backspace */
+ case 0x7F: /* DEL - backspace */
p=delete_char(p_buf, p, &col, &n, plen);
continue;
@@ -1119,7 +1115,7 @@
* Must be a normal character then
*/
if (n < CONFIG_SYS_CBSIZE-2) {
- if (c == '\t') { /* expand TABs */
+ if (c == '\t') { /* expand TABs */
#ifdef CONFIG_AUTO_COMPLETE
/* if auto completion triggered just continue */
*p = '\0';
@@ -1134,7 +1130,7 @@
char buf[2];
/*
- * Echo input using puts() to force am
+ * Echo input using puts() to force an
* LCD flush if we are using an LCD
*/
++col;
@@ -1192,9 +1188,7 @@
{
int nargs = 0;
-#ifdef DEBUG_PARSER
- printf ("parse_line: \"%s\"\n", line);
-#endif
+ debug_parser("parse_line: \"%s\"\n", line);
while (nargs < CONFIG_SYS_MAXARGS) {
/* skip any white space */
@@ -1203,10 +1197,8 @@
if (*line == '\0') { /* end of line, no more args */
argv[nargs] = NULL;
-#ifdef DEBUG_PARSER
- printf ("parse_line: nargs=%d\n", nargs);
-#endif
- return (nargs);
+ debug_parser("parse_line: nargs=%d\n", nargs);
+ return nargs;
}
argv[nargs++] = line; /* begin of argument string */
@@ -1217,10 +1209,8 @@
if (*line == '\0') { /* end of line, no more args */
argv[nargs] = NULL;
-#ifdef DEBUG_PARSER
- printf ("parse_line: nargs=%d\n", nargs);
-#endif
- return (nargs);
+ debug_parser("parse_line: nargs=%d\n", nargs);
+ return nargs;
}
*line++ = '\0'; /* terminate current arg */
@@ -1228,9 +1218,7 @@
printf ("** Too many args (max. %d) **\n", CONFIG_SYS_MAXARGS);
-#ifdef DEBUG_PARSER
- printf ("parse_line: nargs=%d\n", nargs);
-#endif
+ debug_parser("parse_line: nargs=%d\n", nargs);
return (nargs);
}
@@ -1248,12 +1236,10 @@
/* 1 = waiting for '(' or '{' */
/* 2 = waiting for ')' or '}' */
/* 3 = waiting for ''' */
-#ifdef DEBUG_PARSER
char *output_start = output;
- printf ("[PROCESS_MACROS] INPUT len %d: \"%s\"\n", strlen (input),
- input);
-#endif
+ debug_parser("[PROCESS_MACROS] INPUT len %zd: \"%s\"\n", strlen(input),
+ input);
prev = '\0'; /* previous character */
@@ -1341,10 +1327,8 @@
else
*(output - 1) = 0;
-#ifdef DEBUG_PARSER
- printf ("[PROCESS_MACROS] OUTPUT len %d: \"%s\"\n",
- strlen (output_start), output_start);
-#endif
+ debug_parser("[PROCESS_MACROS] OUTPUT len %zd: \"%s\"\n",
+ strlen(output_start), output_start);
}
/****************************************************************************
@@ -1375,12 +1359,12 @@
int repeatable = 1;
int rc = 0;
-#ifdef DEBUG_PARSER
- printf ("[RUN_COMMAND] cmd[%p]=\"", cmd);
- puts (cmd ? cmd : "NULL"); /* use puts - string may be loooong */
- puts ("\"\n");
-#endif
-
+ debug_parser("[RUN_COMMAND] cmd[%p]=\"", cmd);
+ if (DEBUG_PARSER) {
+ /* use puts - string may be loooong */
+ puts(cmd ? cmd : "NULL");
+ puts("\"\n");
+ }
clear_ctrlc(); /* forget any previous Control C */
if (!cmd || !*cmd) {
@@ -1398,9 +1382,7 @@
* repeatable commands
*/
-#ifdef DEBUG_PARSER
- printf ("[PROCESS_SEPARATORS] %s\n", cmd);
-#endif
+ debug_parser("[PROCESS_SEPARATORS] %s\n", cmd);
while (*str) {
/*
@@ -1429,9 +1411,7 @@
}
else
str = sep; /* no more commands for next pass */
-#ifdef DEBUG_PARSER
- printf ("token: \"%s\"\n", token);
-#endif
+ debug_parser("token: \"%s\"\n", token);
/* find macros in this token and replace them */
process_macros (token, finaltoken);
diff --git a/common/spl/spl.c b/common/spl/spl.c
index 7ce2d5f..628c399 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -118,17 +118,13 @@
__weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
{
- typedef void __noreturn (*image_entry_noargs_t)(u32 *);
+ typedef void __noreturn (*image_entry_noargs_t)(void);
+
image_entry_noargs_t image_entry =
(image_entry_noargs_t) spl_image->entry_point;
debug("image entry point: 0x%X\n", spl_image->entry_point);
- /* Pass the saved boot_params from rom code */
-#if defined(CONFIG_VIRTIO) || defined(CONFIG_ZEBU)
- image_entry = (image_entry_noargs_t)0x80100000;
-#endif
- u32 boot_params_ptr_addr = (u32)&boot_params_ptr;
- image_entry((u32 *)boot_params_ptr_addr);
+ image_entry();
}
#ifdef CONFIG_SPL_RAM_DEVICE
diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c
index 7efdcb8..170fa38 100644
--- a/common/spl/spl_mmc.c
+++ b/common/spl/spl_mmc.c
@@ -32,7 +32,7 @@
DECLARE_GLOBAL_DATA_PTR;
-static void mmc_load_image_raw(struct mmc *mmc)
+static int mmc_load_image_raw(struct mmc *mmc, unsigned long sector)
{
unsigned long err;
u32 image_size_sectors;
@@ -42,10 +42,7 @@
sizeof(struct image_header));
/* read image header to find the image size & load address */
- err = mmc->block_dev.block_read(0,
- CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR, 1,
- header);
-
+ err = mmc->block_dev.block_read(0, sector, 1, header);
if (err == 0)
goto end;
@@ -56,19 +53,33 @@
mmc->read_bl_len;
/* Read the header too to avoid extra memcpy */
- err = mmc->block_dev.block_read(0,
- CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR,
- image_size_sectors, (void *)spl_image.load_addr);
+ err = mmc->block_dev.block_read(0, sector, image_size_sectors,
+ (void *)spl_image.load_addr);
end:
- if (err == 0) {
+ if (err == 0)
printf("spl: mmc blk read err - %lu\n", err);
- hang();
- }
+
+ return (err == 0);
}
+#ifdef CONFIG_SPL_OS_BOOT
+static int mmc_load_image_raw_os(struct mmc *mmc)
+{
+ if (!mmc->block_dev.block_read(0,
+ CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR,
+ CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS,
+ (void *)CONFIG_SYS_SPL_ARGS_ADDR)) {
+ printf("mmc args blk read error\n");
+ return -1;
+ }
+
+ return mmc_load_image_raw(mmc, CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR);
+}
+#endif
+
#ifdef CONFIG_SPL_FAT_SUPPORT
-static void mmc_load_image_fat(struct mmc *mmc)
+static int mmc_load_image_fat(struct mmc *mmc, const char *filename)
{
int err;
struct image_header *header;
@@ -76,32 +87,41 @@
header = (struct image_header *)(CONFIG_SYS_TEXT_BASE -
sizeof(struct image_header));
- err = fat_register_device(&mmc->block_dev,
- CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION);
- if (err) {
- printf("spl: fat register err - %d\n", err);
- hang();
- }
-
- err = file_fat_read(CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME,
- header, sizeof(struct image_header));
+ err = file_fat_read(filename, header, sizeof(struct image_header));
if (err <= 0)
goto end;
spl_parse_image_header(header);
- err = file_fat_read(CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME,
- (u8 *)spl_image.load_addr, 0);
+ err = file_fat_read(filename, (u8 *)spl_image.load_addr, 0);
end:
+ if (err <= 0)
+ printf("spl: error reading image %s, err - %d\n",
+ filename, err);
+
+ return (err <= 0);
+}
+
+#ifdef CONFIG_SPL_OS_BOOT
+static int mmc_load_image_fat_os(struct mmc *mmc)
+{
+ int err;
+
+ err = file_fat_read(CONFIG_SPL_FAT_LOAD_ARGS_NAME,
+ (void *)CONFIG_SYS_SPL_ARGS_ADDR, 0);
if (err <= 0) {
printf("spl: error reading image %s, err - %d\n",
- CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME, err);
- hang();
+ CONFIG_SPL_FAT_LOAD_ARGS_NAME, err);
+ return -1;
}
+
+ return mmc_load_image_fat(mmc, CONFIG_SPL_FAT_LOAD_KERNEL_NAME);
}
#endif
+#endif
+
void spl_mmc_load_image(void)
{
struct mmc *mmc;
@@ -121,17 +141,36 @@
printf("spl: mmc init failed: err - %d\n", err);
hang();
}
+
boot_mode = spl_boot_mode();
if (boot_mode == MMCSD_MODE_RAW) {
debug("boot mode - RAW\n");
- mmc_load_image_raw(mmc);
+#ifdef CONFIG_SPL_OS_BOOT
+ if (spl_start_uboot() || mmc_load_image_raw_os(mmc))
+#endif
+ err = mmc_load_image_raw(mmc,
+ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR);
#ifdef CONFIG_SPL_FAT_SUPPORT
} else if (boot_mode == MMCSD_MODE_FAT) {
debug("boot mode - FAT\n");
- mmc_load_image_fat(mmc);
+
+ err = fat_register_device(&mmc->block_dev,
+ CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION);
+ if (err) {
+ printf("spl: fat register err - %d\n", err);
+ hang();
+ }
+
+#ifdef CONFIG_SPL_OS_BOOT
+ if (spl_start_uboot() || mmc_load_image_fat_os(mmc))
+#endif
+ err = mmc_load_image_fat(mmc, CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME);
#endif
} else {
puts("spl: wrong MMC boot mode\n");
hang();
}
+
+ if (err)
+ hang();
}
diff --git a/common/usb_hub.c b/common/usb_hub.c
index 0d79ec3..774ba63 100644
--- a/common/usb_hub.c
+++ b/common/usb_hub.c
@@ -53,6 +53,10 @@
#include <asm/4xx_pci.h>
#endif
+#ifndef CONFIG_USB_HUB_MIN_POWER_ON_DELAY
+#define CONFIG_USB_HUB_MIN_POWER_ON_DELAY 100
+#endif
+
#define USB_BUFSIZ 512
static struct usb_hub_device hub_dev[USB_MAX_HUB];
@@ -148,8 +152,8 @@
debug("port %d returns %lX\n", i + 1, dev->status);
}
- /* Wait at least 100 msec for power to become stable */
- mdelay(max(pgood_delay, (unsigned)100));
+ /* Wait for power to become stable */
+ mdelay(max(pgood_delay, CONFIG_USB_HUB_MIN_POWER_ON_DELAY));
}
void usb_hub_reset(void)
@@ -485,7 +489,11 @@
i + 1, portstatus);
usb_clear_port_feature(dev, i + 1,
USB_PORT_FEAT_C_ENABLE);
-
+ /*
+ * The following hack causes a ghost device problem
+ * to Faraday EHCI
+ */
+#ifndef CONFIG_USB_EHCI_FARADAY
/* EM interference sometimes causes bad shielded USB
* devices to be shutdown by the hub, this hack enables
* them again. Works at least with mouse driver */
@@ -497,6 +505,7 @@
"re-enabling...\n", i + 1);
usb_hub_port_connect_change(dev, i);
}
+#endif
}
if (portstatus & USB_PORT_STAT_SUSPEND) {
debug("port %d suspend change\n", i + 1);
diff --git a/common/usb_kbd.c b/common/usb_kbd.c
index b962849..3174b5e 100644
--- a/common/usb_kbd.c
+++ b/common/usb_kbd.c
@@ -461,8 +461,13 @@
usb_set_idle(dev, iface->desc.bInterfaceNumber, REPEAT_RATE, 0);
debug("USB KBD: enable interrupt pipe...\n");
- usb_submit_int_msg(dev, pipe, data->new, maxp > 8 ? 8 : maxp,
- ep->bInterval);
+ if (usb_submit_int_msg(dev, pipe, data->new, maxp > 8 ? 8 : maxp,
+ ep->bInterval) < 0) {
+ printf("Failed to get keyboard state from device %04x:%04x\n",
+ dev->descriptor.idVendor, dev->descriptor.idProduct);
+ /* Abort, we don't want to use that non-functional keyboard. */
+ return 0;
+ }
/* Success. */
return 1;
@@ -496,6 +501,7 @@
if (old_dev) {
/* Already registered, just return ok. */
debug("USB KBD: is already registered.\n");
+ usb_kbd_deregister();
return 1;
}
diff --git a/disk/part_efi.c b/disk/part_efi.c
index 5986589..fb5e9f0 100644
--- a/disk/part_efi.c
+++ b/disk/part_efi.c
@@ -372,7 +372,7 @@
u32 offset = (u32)le32_to_cpu(gpt_h->first_usable_lba);
ulong start;
int i, k;
- size_t name_len;
+ size_t efiname_len, dosname_len;
#ifdef CONFIG_PARTITION_UUIDS
char *str_uuid;
#endif
@@ -420,9 +420,14 @@
sizeof(gpt_entry_attributes));
/* partition name */
- name_len = sizeof(gpt_e[i].partition_name)
+ efiname_len = sizeof(gpt_e[i].partition_name)
/ sizeof(efi_char16_t);
- for (k = 0; k < name_len; k++)
+ dosname_len = sizeof(partitions[i].name);
+
+ memset(gpt_e[i].partition_name, 0,
+ sizeof(gpt_e[i].partition_name));
+
+ for (k = 0; k < min(dosname_len, efiname_len); k++)
gpt_e[i].partition_name[k] =
(efi_char16_t)(partitions[i].name[k]);
diff --git a/doc/README.at91 b/doc/README.at91
index b51df00..6741213 100644
--- a/doc/README.at91
+++ b/doc/README.at91
@@ -1,6 +1,9 @@
Atmel AT91 Evaluation kits
-http://atmel.com/dyn/products/tools.asp?family_id=605#1443
+Index
+ - I. Board mapping & boot media
+ - II. NAND partition table
+ - III. watchdog support
I. Board mapping & boot media
------------------------------------------------------------------------------
@@ -10,7 +13,7 @@
Memory map
0x20000000 - 23FFFFFF SDRAM (64 MB)
0xC0000000 - Cxxxxxxx Atmel Dataflash card (J13)
- 0xD0000000 - Dxxxxxxx Soldered Atmel Dataflash
+ 0xD0000000 - D07FFFFF Soldered Atmel Dataflash (AT45DB642)
Environment variables
@@ -20,7 +23,6 @@
- Nand flash.
You can choose your storage location at config step (here for at91sam9260ek) :
- make at91sam9260ek_config - use data flash (spi cs1) (default)
make at91sam9260ek_nandflash_config - use nand flash
make at91sam9260ek_dataflash_cs0_config - use data flash (spi cs0)
make at91sam9260ek_dataflash_cs1_config - use data flash (spi cs1)
@@ -32,7 +34,7 @@
Memory map
0x20000000 - 23FFFFFF SDRAM (64 MB)
- 0xC0000000 - Cxxxxxxx Soldered Atmel Dataflash
+ 0xC0000000 - C07FFFFF Soldered Atmel Dataflash (AT45DB642)
0xD0000000 - Dxxxxxxx Atmel Dataflash card (J22)
Environment variables
@@ -43,7 +45,6 @@
- Nand flash.
You can choose your storage location at config step (here for at91sam9260ek) :
- make at91sam9261ek_config - use data flash (spi cs0) (default)
make at91sam9261ek_nandflash_config - use nand flash
make at91sam9261ek_dataflash_cs0_config - use data flash (spi cs0)
make at91sam9261ek_dataflash_cs3_config - use data flash (spi cs3)
@@ -65,7 +66,6 @@
- Nor flash (not populate by default)
You can choose your storage location at config step (here for at91sam9260ek) :
- make at91sam9263ek_config - use data flash (spi cs0) (default)
make at91sam9263ek_nandflash_config - use nand flash
make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0)
make at91sam9263ek_norflash_config - use nor flash
@@ -79,19 +79,15 @@
------------------------------------------------------------------------------
Memory map
- 0x20000000 - 23FFFFFF SDRAM (64 MB)
- 0xC0000000 - Cxxxxxxx Atmel Dataflash card (J12)
+ 0x70000000 - 77FFFFFF SDRAM (128 MB)
Environment variables
U-Boot environment variables can be stored at different places:
- - Dataflash on SPI chip select 0 (dataflash card)
- Nand flash.
You can choose your storage location at config step (here for at91sam9m10g45ek) :
- make at91sam9m10g45ek_config - use data flash (spi cs0) (default)
make at91sam9m10g45ek_nandflash_config - use nand flash
- make at91sam9m10g45ek_dataflash_cs0_config - use data flash (spi cs0)
------------------------------------------------------------------------------
@@ -100,7 +96,7 @@
Memory map
0x20000000 - 23FFFFFF SDRAM (64 MB)
- 0xC0000000 - Cxxxxxxx Soldered Atmel Dataflash
+ 0xC0000000 - C07FFFFF Soldered Atmel Dataflash (AT45DB642)
Environment variables
@@ -108,12 +104,66 @@
- Dataflash on SPI chip select 0
- Nand flash.
- You can choose your storage location at config step (here for at91sam9260ek) :
- make at91sam9263ek_config - use data flash (spi cs0) (default)
- make at91sam9263ek_nandflash_config - use nand flash
- make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0)
+ You can choose your storage location at config step (here for at91sam9rlek) :
+ make at91sam9rlek_nandflash_config - use nand flash
-II. Watchdog support
+
+------------------------------------------------------------------------------
+AT91SAM9N12EK, AT91SAM9X5EK
+------------------------------------------------------------------------------
+
+Memory map
+ 0x20000000 - 27FFFFFF SDRAM (128 MB)
+
+Environment variables
+
+ U-Boot environment variables can be stored at different places:
+ - Nand flash.
+ - SD/MMC card
+ - Serialflash/Dataflash on SPI chip select 0
+
+ You can choose your storage location at config step (here for at91sam9x5ek) :
+ make at91sam9x5ek_dataflash_config - use data flash
+ make at91sam9x5ek_mmc_config - use sd/mmc card
+ make at91sam9x5ek_nandflash_config - use nand flash
+ make at91sam9x5ek_spiflash_config - use serial flash
+
+
+------------------------------------------------------------------------------
+SAMA5D3XEK
+------------------------------------------------------------------------------
+
+Memory map
+ 0x20000000 - 3FFFFFFF SDRAM (512 MB)
+
+Environment variables
+
+ U-Boot environment variables can be stored at different places:
+ - Nand flash.
+ - SD/MMC card
+ - Serialflash on SPI chip select 0
+
+ You can choose your storage location at config step (here for sama5d3xek) :
+ make sama5d3xek_mmc_config - use SD/MMC card
+ make sama5d3xek_nandflash_config - use nand flash
+ make sama5d3xek_serialflash_config - use serial flash
+
+
+II. NAND partition table
+
+ All the board support boot from NAND flash will use the following NAND
+ partition table
+
+ 0x00000000 - 0x0003FFFF bootstrap (256 KiB)
+ 0x00040000 - 0x000BFFFF u-boot (512 KiB)
+ 0x000C0000 - 0x000FFFFF env (256 KiB)
+ 0x00100000 - 0x0013FFFF env_redundant (256 KiB)
+ 0x00140000 - 0x0017FFFF spare (256 KiB)
+ 0x00180000 - 0x001FFFFF dtb (512 KiB)
+ 0x00200000 - 0x007FFFFF kernel (6 MiB)
+ 0x00800000 - 0xxxxxxxxx rootfs (All left)
+
+III. Watchdog support
For security reasons, the at91 watchdog is running at boot time and,
if deactivated, cannot be used anymore.
diff --git a/doc/README.b4860qds b/doc/README.b4860qds
index f6c5ff8..bd10a6d 100644
--- a/doc/README.b4860qds
+++ b/doc/README.b4860qds
@@ -185,7 +185,7 @@
0xF_A0C0_0000 0xF_DFFF_FFFF Free 1012 MB
0xF_A000_0000 0xF_A0BF_FFFF MAPLE0/1/2 12 MB
0xF_0040_0000 0xF_9FFF_FFFF Free 12 GB
-0xF_0000_0000 0xF_003F_FFFF DCSR 4 MB
+0xF_0000_0000 0xF_01FF_FFFF DCSR 32 MB
0xC_4000_0000 0xE_FFFF_FFFF Free 11 GB
0xC_3000_0000 0xC_3FFF_FFFF sRIO-2 I/O 256 MB
0xC_2000_0000 0xC_2FFF_FFFF sRIO-1 I/O 256 MB
@@ -215,7 +215,7 @@
0xF_A0C0_0000 0xF_DFFF_FFFF Free 1012 MB
0xF_A000_0000 0xF_A0BF_FFFF MAPLE0/1/2 12 MB
0xF_0040_0000 0xF_9FFF_FFFF Free 12 GB
-0xF_0000_0000 0xF_003F_FFFF DCSR 4 MB
+0xF_0000_0000 0xF_01FF_FFFF DCSR 32 MB
0xC_4000_0000 0xE_FFFF_FFFF Free 11 GB
0xC_3000_0000 0xC_3FFF_FFFF sRIO-2 I/O 256 MB
0xC_2000_0000 0xC_2FFF_FFFF sRIO-1 I/O 256 MB
diff --git a/doc/README.fsl_iim b/doc/README.fsl_iim
new file mode 100644
index 0000000..e087f5e
--- /dev/null
+++ b/doc/README.fsl_iim
@@ -0,0 +1,48 @@
+Driver implementing the fuse API for Freescale's IC Identification Module (IIM)
+
+This IP can be found on the following SoCs:
+ - MPC512x,
+ - i.MX25,
+ - i.MX27,
+ - i.MX31,
+ - i.MX35,
+ - i.MX51,
+ - i.MX53.
+
+The section numbers in this file refer to the i.MX25 Reference Manual.
+
+A fuse word contains 8 fuse bit slots, as explained in 30.4.2.2.1.
+
+A bank contains 256 fuse word slots, as shown by the memory map in 30.3.1.
+
+Some fuse bit or word slots may not have the corresponding fuses actually
+implemented in the fusebox.
+
+See the README files of the SoCs using this driver in order to know the
+conventions used by U-Boot to store some specific data in the fuses, e.g. MAC
+addresses.
+
+Fuse operations:
+
+ Read
+ Read operations are implemented as read accesses to the shadow registers,
+ using "Word y of Bank x" from the register summary in 30.3.2. This is
+ explained in detail in 30.4.5.1.
+
+ Sense
+ Sense operations are implemented as explained in 30.4.5.2.
+
+ Program
+ Program operations are implemented as explained in 30.4.5.3. Following
+ this operation, the shadow registers are reloaded by the hardware (not
+ immediately, but this does not make any difference for a user reading
+ these registers).
+
+ Override
+ Override operations are implemented as write accesses to the shadow
+ registers, as explained in 30.4.5.4.
+
+Configuration:
+
+ CONFIG_FSL_IIM
+ Define this to enable the fsl_iim driver.
diff --git a/doc/README.fuse b/doc/README.fuse
new file mode 100644
index 0000000..1bc91c4
--- /dev/null
+++ b/doc/README.fuse
@@ -0,0 +1,67 @@
+Fuse API functions and commands
+
+The fuse API allows to control a fusebox and how it is used by the upper
+hardware layers.
+
+A fuse corresponds to a single non-volatile memory bit that can be programmed
+(i.e. blown, set to 1) only once. The programming operation is irreversible. A
+fuse that has not been programmed reads 0.
+
+Fuses can be used by SoCs to store various permanent configuration and data,
+e.g. boot configuration, security configuration, MAC addresses, etc.
+
+A fuse word is the smallest group of fuses that can be read at once from the
+fusebox control IP registers. This is limited to 32 bits with the current API.
+
+A fuse bank is the smallest group of fuse words having a common ID, as defined
+by each SoC.
+
+Upon startup, the fusebox control IP reads the fuse values and stores them to a
+volatile shadow cache.
+
+See the README files of the drivers implementing this API in order to know the
+SoC- and implementation-specific details.
+
+Functions / commands:
+
+ int fuse_read(u32 bank, u32 word, u32 *val);
+ fuse read <bank> <word> [<cnt>]
+ Read fuse words from the shadow cache.
+
+ int fuse_sense(u32 bank, u32 word, u32 *val);
+ fuse sense <bank> <word> [<cnt>]
+ Sense - i.e. read directly from the fusebox, skipping the shadow cache -
+ fuse words. This operation does not update the shadow cache.
+
+ This is useful to know the true value of fuses if an override has been
+ performed (see below).
+
+ int fuse_prog(u32 bank, u32 word, u32 val);
+ fuse prog [-y] <bank> <word> <hexval> [<hexval>...]
+ Program fuse words. This operation directly affects the fusebox and is
+ irreversible. The shadow cache is updated accordingly or not, depending on
+ each IP.
+
+ Only the bits to be programmed should be set in the input value (i.e. for
+ fuse bits that have already been programmed and hence should be left
+ unchanged by a further programming, it is preferable to clear the
+ corresponding bits in the input value in order not to perform a new
+ hardware programming operation on these fuse bits).
+
+ int fuse_override(u32 bank, u32 word, u32 val);
+ fuse override <bank> <word> <hexval> [<hexval>...]
+ Override fuse words in the shadow cache.
+
+ The fusebox is unaffected, so following this operation, the shadow cache
+ may differ from the fusebox values. Read or sense operations can then be
+ used to get the values from the shadow cache or from the fusebox.
+
+ This is useful to change the behaviors linked to some cached fuse values,
+ either because this is needed only temporarily, or because some of the
+ fuses have already been programmed or are locked (if the SoC allows to
+ override a locked fuse).
+
+Configuration:
+
+ CONFIG_CMD_FUSE
+ Define this to enable the fuse commands.
diff --git a/doc/README.imx25 b/doc/README.imx25
new file mode 100644
index 0000000..0ca21b6
--- /dev/null
+++ b/doc/README.imx25
@@ -0,0 +1,10 @@
+U-Boot for Freescale i.MX25
+
+This file contains information for the port of U-Boot to the Freescale i.MX25
+SoC.
+
+1. CONVENTIONS FOR FUSE ASSIGNMENTS
+-----------------------------------
+
+1.1 MAC Address: It is stored in the words 26 to 31 of fuse bank 0, using the
+ natural MAC byte order (i.e. MSB first).
diff --git a/doc/README.imx27 b/doc/README.imx27
new file mode 100644
index 0000000..6f92cb4
--- /dev/null
+++ b/doc/README.imx27
@@ -0,0 +1,10 @@
+U-Boot for Freescale i.MX27
+
+This file contains information for the port of U-Boot to the Freescale i.MX27
+SoC.
+
+1. CONVENTIONS FOR FUSE ASSIGNMENTS
+-----------------------------------
+
+1.1 MAC Address: It is stored in the words 4 to 9 of fuse bank 0, using the
+ reversed MAC byte order (i.e. LSB first).
diff --git a/doc/README.imx5 b/doc/README.imx5
index e08941e..c5312b6 100644
--- a/doc/README.imx5
+++ b/doc/README.imx5
@@ -20,3 +20,9 @@
This option should be enabled for boards having a SYS_ON_OFF_CTL signal
connected to GPIO1[23] and triggering the MAIN_PWR_ON signal like in the
reference designs.
+
+2. CONVENTIONS FOR FUSE ASSIGNMENTS
+-----------------------------------
+
+2.1 MAC Address: It is stored in the words 9 to 14 of fuse bank 1, using the
+ natural MAC byte order (i.e. MSB first).
diff --git a/doc/README.imx6 b/doc/README.imx6
new file mode 100644
index 0000000..513a06e
--- /dev/null
+++ b/doc/README.imx6
@@ -0,0 +1,10 @@
+U-Boot for Freescale i.MX6
+
+This file contains information for the port of U-Boot to the Freescale i.MX6
+SoC.
+
+1. CONVENTIONS FOR FUSE ASSIGNMENTS
+-----------------------------------
+
+1.1 MAC Address: It is stored in fuse bank 4, with the 32 lsbs in word 2 and the
+ 16 msbs in word 3.
diff --git a/doc/README.imximage b/doc/README.imximage
index 073e3fc..802eb90 100644
--- a/doc/README.imximage
+++ b/doc/README.imximage
@@ -65,9 +65,27 @@
This command need appear the fist before
other valid commands in configuration file.
+ BOOT_OFFSET value
+
+ This command is parallel to BOOT_FROM and
+ is preferred over BOOT_FROM.
+
+ value: Offset of the image header, this
+ value shall be set to one of the
+ values found in the file:
+ arch/arm/include/asm/\
+ imx-common/imximage.cfg
+ Example:
+ BOOT_OFFSET FLASH_OFFSET_STANDARD
+
BOOT_FROM nand/spi/sd/onenand/nor/sata
+
+ This command is parallel to BOOT_OFFSET and
+ is to be deprecated in favor of BOOT_OFFSET.
+
Example:
BOOT_FROM spi
+
DATA type address value
type: word=4, halfword=2, byte=1
diff --git a/doc/README.mxc_ocotp b/doc/README.mxc_ocotp
new file mode 100644
index 0000000..7a2863c
--- /dev/null
+++ b/doc/README.mxc_ocotp
@@ -0,0 +1,51 @@
+Driver implementing the fuse API for Freescale's On-Chip OTP Controller (OCOTP)
+on MXC
+
+This IP can be found on the following SoCs:
+ - Vybrid VF610,
+ - i.MX6.
+
+Note that this IP is different from albeit similar to the IPs of the same name
+that can be found on the following SoCs:
+ - i.MX23,
+ - i.MX28,
+ - i.MX50.
+
+The section numbers in this file refer to the i.MX6 Reference Manual.
+
+A fuse word contains 32 fuse bit slots, as explained in 46.2.1.
+
+A bank contains 8 fuse word slots, as explained in 46.2.1 and shown by the
+memory map in 46.4.
+
+Some fuse bit or word slots may not have the corresponding fuses actually
+implemented in the fusebox.
+
+See the README files of the SoCs using this driver in order to know the
+conventions used by U-Boot to store some specific data in the fuses, e.g. MAC
+addresses.
+
+Fuse operations:
+
+ Read
+ Read operations are implemented as read accesses to the shadow registers,
+ using "Bankx Wordy" from the memory map in 46.4. This is explained in
+ detail by the first two paragraphs in 46.2.1.2.
+
+ Sense
+ Sense operations are implemented as the direct fusebox read explained by
+ the steps in 46.2.1.2.
+
+ Program
+ Program operations are implemented as explained by the steps in 46.2.1.3.
+ Following this operation, the shadow registers are not reloaded by the
+ hardware.
+
+ Override
+ Override operations are implemented as write accesses to the shadow
+ registers, as explained by the first paragraph in 46.2.1.3.
+
+Configuration:
+
+ CONFIG_MXC_OCOTP
+ Define this to enable the mxc_ocotp driver.
diff --git a/doc/README.omap-reset-time b/doc/README.omap-reset-time
new file mode 100644
index 0000000..0c974ba
--- /dev/null
+++ b/doc/README.omap-reset-time
@@ -0,0 +1,20 @@
+README on how reset time on OMAPs should be calculated
+
+CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC:
+Most OMAPs' provide a way to specify the time for
+which the reset should be held low while the voltages
+and Oscillator outputs stabilize.
+
+This time is mostly board and PMIC dependent. Hence the
+boards are expected to specify a pre-computed time
+using the above option, (the details on how to compute
+the value are given below) without which a default time
+as specified by CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC
+is used.
+
+The value for CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC
+can be computed using a summation of the below 3 parameters
+-1- Time taken by the Osciallator to stop and restart
+-2- PMIC OTP time
+-3- Voltage ramp time, which can be derived using the
+PMIC slew rate and value of voltage ramp needed.
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 9223f6e..a0f1fa3 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -96,3 +96,4 @@
CPCI440 powerpc 440GP b568fd2 2007-12-27 Matthias Fuchs <matthias.fuchs@esd-electronics.com>
PCIPPC2 powerpc MPC740/MPC750 7c9e89b 2013-02-07 Wolfgang Denk <wd@denx.de>
PCIPPC6 powerpc MPC740/MPC750 - - Wolfgang Denk <wd@denx.de>
+omap2420h4 arm omap24xx - 2013-06-04 Richard Woodruff <r-woodruff2@ti.com>
diff --git a/doc/README.t4240qds b/doc/README.t4240qds
index 677d120..a9841fb 100644
--- a/doc/README.t4240qds
+++ b/doc/README.t4240qds
@@ -86,7 +86,7 @@
0x0_0000_0000 (0x0_0000_0000) - 0x0_7fff_ffff 2GB DDR (more than 2GB is initialized but not mapped under with TLB)
0x0_8000_0000 (0xc_0000_0000) - 0x0_dfff_ffff 1.5GB PCIE memory
-0x0_f000_0000 (0xf_0000_0000) - 0x0_f03f_ffff 4MB DCSR
+0x0_f000_0000 (0xf_0000_0000) - 0x0_f1ff_ffff 32MB DCSR (includes trace buffers)
0x0_f400_0000 (0xf_f400_0000) - 0x0_f5ff_ffff 32MB BMan
0x0_f600_0000 (0xf_f600_0000) - 0x0_f7ff_ffff 32MB QMan
0x0_f800_0000 (0xf_f800_0000) - 0x0_f803_ffff 256KB PCIE IO
@@ -96,3 +96,27 @@
0x0_ffff_f000 (0x0_7fff_fff0) - 0x0_ffff_ffff 4KB Boot page translation for secondary cores
The physical address of the last (boot page translation) varies with the actual DDR size.
+
+Voltage ID and VDD override
+--------------------
+T4240 has a VID feature. U-boot reads the VID efuses and adjust the voltage
+accordingly. The voltage can also be override by command vdd_override. The
+syntax is
+
+vdd_override <voltage in mV>, eg. 1050 is for 1.050v.
+
+Upon success, the actual voltage will be read back. The value is checked
+for safety and any invalid value will not adjust the voltage.
+
+Another way to override VDD is to use environmental variable, in case of using
+command is too late for some debugging. The syntax is
+
+setenv t4240qds_vdd_mv <voltage in mV>
+saveenv
+reset
+
+The override voltage takes effect when booting.
+
+Note: voltage adjustment needs to be done step by step. Changing voltage too
+rapidly may cause current surge. The voltage stepping is done by software.
+Users can set the final voltage directly.
diff --git a/doc/README.vf610 b/doc/README.vf610
new file mode 100644
index 0000000..38cf5cf
--- /dev/null
+++ b/doc/README.vf610
@@ -0,0 +1,10 @@
+U-Boot for Freescale Vybrid VF610
+
+This file contains information for the port of U-Boot to the Freescale Vybrid
+VF610 SoC.
+
+1. CONVENTIONS FOR FUSE ASSIGNMENTS
+-----------------------------------
+
+1.1 MAC Address: It is stored in fuse bank 4, with the 16 msbs in word 2 and the
+ 32 lsbs in word 3.
diff --git a/doc/device-tree-bindings/video/simple-framebuffer.txt b/doc/device-tree-bindings/video/simple-framebuffer.txt
new file mode 100644
index 0000000..3ea4605
--- /dev/null
+++ b/doc/device-tree-bindings/video/simple-framebuffer.txt
@@ -0,0 +1,25 @@
+Simple Framebuffer
+
+A simple frame-buffer describes a raw memory region that may be rendered to,
+with the assumption that the display hardware has already been set up to scan
+out from that buffer.
+
+Required properties:
+- compatible: "simple-framebuffer"
+- reg: Should contain the location and size of the framebuffer memory.
+- width: The width of the framebuffer in pixels.
+- height: The height of the framebuffer in pixels.
+- stride: The number of bytes in each line of the framebuffer.
+- format: The format of the framebuffer surface. Valid values are:
+ - r5g6b5 (16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b).
+
+Example:
+
+ framebuffer {
+ compatible = "simple-framebuffer";
+ reg = <0x1d385000 (1600 * 1200 * 2)>;
+ width = <1600>;
+ height = <1200>;
+ stride = <(1600 * 2)>;
+ format = "r5g6b5";
+ };
diff --git a/drivers/dma/apbh_dma.c b/drivers/dma/apbh_dma.c
index 0c1cd83..510cb28 100644
--- a/drivers/dma/apbh_dma.c
+++ b/drivers/dma/apbh_dma.c
@@ -31,7 +31,8 @@
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
-#include <asm/arch/dma.h>
+#include <asm/imx-common/dma.h>
+#include <asm/imx-common/regs-apbh.h>
static struct mxs_dma_chan mxs_dma_channels[MXS_MAX_DMA_CHANNELS];
@@ -226,7 +227,7 @@
#if defined(CONFIG_MX23)
uint32_t setreg = (uint32_t)(&apbh_regs->hw_apbh_ctrl0_set);
uint32_t offset = APBH_CTRL0_RESET_CHANNEL_OFFSET;
-#elif defined(CONFIG_MX28)
+#elif (defined(CONFIG_MX28) || defined(CONFIG_MX6))
uint32_t setreg = (uint32_t)(&apbh_regs->hw_apbh_channel_ctrl_set);
uint32_t offset = APBH_CHANNEL_CTRL_RESET_CHANNEL_OFFSET;
#endif
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index b48f623..0b51dcd 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -30,6 +30,7 @@
COBJS-$(CONFIG_FPGA_SPARTAN2) += spartan2.o
COBJS-$(CONFIG_FPGA_SPARTAN3) += spartan3.o
COBJS-$(CONFIG_FPGA_VIRTEX2) += virtex2.o
+COBJS-$(CONFIG_FPGA_ZYNQPL) += zynqpl.o
COBJS-$(CONFIG_FPGA_XILINX) += xilinx.o
COBJS-$(CONFIG_FPGA_LATTICE) += ivm_core.o lattice.o
ifdef CONFIG_FPGA_ALTERA
diff --git a/drivers/fpga/fpga.c b/drivers/fpga/fpga.c
index 26d2443..f70bff6 100644
--- a/drivers/fpga/fpga.c
+++ b/drivers/fpga/fpga.c
@@ -22,122 +22,99 @@
*
*/
-/*
- * Generic FPGA support
- */
+/* Generic FPGA support */
#include <common.h> /* core U-Boot definitions */
#include <xilinx.h> /* xilinx specific definitions */
#include <altera.h> /* altera specific definitions */
#include <lattice.h>
-#if 0
-#define FPGA_DEBUG /* define FPGA_DEBUG to get debug messages */
-#endif
-
/* Local definitions */
#ifndef CONFIG_MAX_FPGA_DEVICES
#define CONFIG_MAX_FPGA_DEVICES 5
#endif
-/* Enable/Disable debug console messages */
-#ifdef FPGA_DEBUG
-#define PRINTF(fmt,args...) printf (fmt ,##args)
-#else
-#define PRINTF(fmt,args...)
-#endif
-
/* Local static data */
static int next_desc = FPGA_INVALID_DEVICE;
static fpga_desc desc_table[CONFIG_MAX_FPGA_DEVICES];
-/* Local static functions */
-static __attribute__((__const__)) fpga_desc * __attribute__((__const__)) fpga_get_desc( int devnum );
-static __attribute__((__const__)) fpga_desc * __attribute__((__const__)) fpga_validate(int devnum, const void *buf,
- size_t bsize, char *fn );
-static int fpga_dev_info( int devnum );
-
-
-/* ------------------------------------------------------------------------- */
-
-/* fpga_no_sup
+/*
+ * fpga_no_sup
* 'no support' message function
*/
-static void fpga_no_sup( char *fn, char *msg )
+static void fpga_no_sup(char *fn, char *msg)
{
- if ( fn && msg ) {
- printf( "%s: No support for %s.\n", fn, msg);
- } else if ( msg ) {
- printf( "No support for %s.\n", msg);
- } else {
- printf( "No FPGA suport!\n");
- }
+ if (fn && msg)
+ printf("%s: No support for %s.\n", fn, msg);
+ else if (msg)
+ printf("No support for %s.\n", msg);
+ else
+ printf("No FPGA suport!\n");
}
/* fpga_get_desc
* map a device number to a descriptor
*/
-static __attribute__((__const__)) fpga_desc * __attribute__((__const__)) fpga_get_desc( int devnum )
+static const fpga_desc *const fpga_get_desc(int devnum)
{
- fpga_desc *desc = (fpga_desc * )NULL;
+ fpga_desc *desc = (fpga_desc *)NULL;
- if (( devnum >= 0 ) && (devnum < next_desc )) {
+ if ((devnum >= 0) && (devnum < next_desc)) {
desc = &desc_table[devnum];
- PRINTF( "%s: found fpga descriptor #%d @ 0x%p\n",
- __FUNCTION__, devnum, desc );
+ debug("%s: found fpga descriptor #%d @ 0x%p\n",
+ __func__, devnum, desc);
}
return desc;
}
-
-/* fpga_validate
+/*
+ * fpga_validate
* generic parameter checking code
*/
-static __attribute__((__const__)) fpga_desc * __attribute__((__const__)) fpga_validate(int devnum, const void *buf,
- size_t bsize, char *fn )
+const fpga_desc *const fpga_validate(int devnum, const void *buf,
+ size_t bsize, char *fn)
{
- fpga_desc * desc = fpga_get_desc( devnum );
+ const fpga_desc *desc = fpga_get_desc(devnum);
- if ( !desc ) {
- printf( "%s: Invalid device number %d\n", fn, devnum );
- }
+ if (!desc)
+ printf("%s: Invalid device number %d\n", fn, devnum);
- if ( !buf ) {
- printf( "%s: Null buffer.\n", fn );
+ if (!buf) {
+ printf("%s: Null buffer.\n", fn);
return (fpga_desc * const)NULL;
}
return desc;
}
-
-/* fpga_dev_info
+/*
+ * fpga_dev_info
* generic multiplexing code
*/
-static int fpga_dev_info( int devnum )
+static int fpga_dev_info(int devnum)
{
- int ret_val = FPGA_FAIL; /* assume failure */
- const fpga_desc * const desc = fpga_get_desc( devnum );
+ int ret_val = FPGA_FAIL; /* assume failure */
+ const fpga_desc * const desc = fpga_get_desc(devnum);
- if ( desc ) {
- PRINTF( "%s: Device Descriptor @ 0x%p\n",
- __FUNCTION__, desc->devdesc );
+ if (desc) {
+ debug("%s: Device Descriptor @ 0x%p\n",
+ __func__, desc->devdesc);
- switch ( desc->devtype ) {
+ switch (desc->devtype) {
case fpga_xilinx:
#if defined(CONFIG_FPGA_XILINX)
- printf( "Xilinx Device\nDescriptor @ 0x%p\n", desc );
- ret_val = xilinx_info( desc->devdesc );
+ printf("Xilinx Device\nDescriptor @ 0x%p\n", desc);
+ ret_val = xilinx_info(desc->devdesc);
#else
- fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
+ fpga_no_sup((char *)__func__, "Xilinx devices");
#endif
break;
case fpga_altera:
#if defined(CONFIG_FPGA_ALTERA)
- printf( "Altera Device\nDescriptor @ 0x%p\n", desc );
- ret_val = altera_info( desc->devdesc );
+ printf("Altera Device\nDescriptor @ 0x%p\n", desc);
+ ret_val = altera_info(desc->devdesc);
#else
- fpga_no_sup( (char *)__FUNCTION__, "Altera devices" );
+ fpga_no_sup((char *)__func__, "Altera devices");
#endif
break;
case fpga_lattice:
@@ -145,171 +122,183 @@
printf("Lattice Device\nDescriptor @ 0x%p\n", desc);
ret_val = lattice_info(desc->devdesc);
#else
- fpga_no_sup( (char *)__FUNCTION__, "Lattice devices" );
+ fpga_no_sup((char *)__func__, "Lattice devices");
#endif
break;
default:
- printf( "%s: Invalid or unsupported device type %d\n",
- __FUNCTION__, desc->devtype );
+ printf("%s: Invalid or unsupported device type %d\n",
+ __func__, desc->devtype);
}
} else {
- printf( "%s: Invalid device number %d\n",
- __FUNCTION__, devnum );
+ printf("%s: Invalid device number %d\n", __func__, devnum);
}
return ret_val;
}
-
-/* ------------------------------------------------------------------------- */
-/* fgpa_init is usually called from misc_init_r() and MUST be called
+/*
+ * fgpa_init is usually called from misc_init_r() and MUST be called
* before any of the other fpga functions are used.
*/
void fpga_init(void)
{
next_desc = 0;
- memset( desc_table, 0, sizeof(desc_table));
+ memset(desc_table, 0, sizeof(desc_table));
- PRINTF( "%s: CONFIG_FPGA = 0x%x\n", __FUNCTION__, CONFIG_FPGA );
+ debug("%s\n", __func__);
}
-/* fpga_count
+/*
+ * fpga_count
* Basic interface function to get the current number of devices available.
*/
-int fpga_count( void )
+int fpga_count(void)
{
return next_desc;
}
-/* fpga_add
+/*
+ * fpga_add
* Add the device descriptor to the device table.
*/
-int fpga_add( fpga_type devtype, void *desc )
+int fpga_add(fpga_type devtype, void *desc)
{
int devnum = FPGA_INVALID_DEVICE;
- if ( next_desc < 0 ) {
- printf( "%s: FPGA support not initialized!\n", __FUNCTION__ );
- } else if (( devtype > fpga_min_type ) && ( devtype < fpga_undefined )) {
- if ( desc ) {
- if ( next_desc < CONFIG_MAX_FPGA_DEVICES ) {
+ if (next_desc < 0) {
+ printf("%s: FPGA support not initialized!\n", __func__);
+ } else if ((devtype > fpga_min_type) && (devtype < fpga_undefined)) {
+ if (desc) {
+ if (next_desc < CONFIG_MAX_FPGA_DEVICES) {
devnum = next_desc;
desc_table[next_desc].devtype = devtype;
desc_table[next_desc++].devdesc = desc;
} else {
- printf( "%s: Exceeded Max FPGA device count\n", __FUNCTION__ );
+ printf("%s: Exceeded Max FPGA device count\n",
+ __func__);
}
} else {
- printf( "%s: NULL device descriptor\n", __FUNCTION__ );
+ printf("%s: NULL device descriptor\n", __func__);
}
} else {
- printf( "%s: Unsupported FPGA type %d\n", __FUNCTION__, devtype );
+ printf("%s: Unsupported FPGA type %d\n", __func__, devtype);
}
return devnum;
}
/*
- * Generic multiplexing code
+ * Convert bitstream data and load into the fpga
+ */
+int __weak fpga_loadbitstream(int devnum, char *fpgadata, size_t size)
+{
+ printf("Bitstream support not implemented for this FPGA device\n");
+ return FPGA_FAIL;
+}
+
+/*
+ * Generic multiplexing code
*/
int fpga_load(int devnum, const void *buf, size_t bsize)
{
int ret_val = FPGA_FAIL; /* assume failure */
- fpga_desc * desc = fpga_validate( devnum, buf, bsize, (char *)__FUNCTION__ );
+ const fpga_desc *desc = fpga_validate(devnum, buf, bsize,
+ (char *)__func__);
- if ( desc ) {
- switch ( desc->devtype ) {
+ if (desc) {
+ switch (desc->devtype) {
case fpga_xilinx:
#if defined(CONFIG_FPGA_XILINX)
- ret_val = xilinx_load( desc->devdesc, buf, bsize );
+ ret_val = xilinx_load(desc->devdesc, buf, bsize);
#else
- fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
+ fpga_no_sup((char *)__func__, "Xilinx devices");
#endif
break;
case fpga_altera:
#if defined(CONFIG_FPGA_ALTERA)
- ret_val = altera_load( desc->devdesc, buf, bsize );
+ ret_val = altera_load(desc->devdesc, buf, bsize);
#else
- fpga_no_sup( (char *)__FUNCTION__, "Altera devices" );
+ fpga_no_sup((char *)__func__, "Altera devices");
#endif
break;
case fpga_lattice:
#if defined(CONFIG_FPGA_LATTICE)
ret_val = lattice_load(desc->devdesc, buf, bsize);
#else
- fpga_no_sup( (char *)__FUNCTION__, "Lattice devices" );
+ fpga_no_sup((char *)__func__, "Lattice devices");
#endif
break;
default:
- printf( "%s: Invalid or unsupported device type %d\n",
- __FUNCTION__, desc->devtype );
+ printf("%s: Invalid or unsupported device type %d\n",
+ __func__, desc->devtype);
}
}
return ret_val;
}
-/* fpga_dump
+/*
+ * fpga_dump
* generic multiplexing code
*/
int fpga_dump(int devnum, const void *buf, size_t bsize)
{
int ret_val = FPGA_FAIL; /* assume failure */
- fpga_desc * desc = fpga_validate( devnum, buf, bsize, (char *)__FUNCTION__ );
+ const fpga_desc *desc = fpga_validate(devnum, buf, bsize,
+ (char *)__func__);
- if ( desc ) {
- switch ( desc->devtype ) {
+ if (desc) {
+ switch (desc->devtype) {
case fpga_xilinx:
#if defined(CONFIG_FPGA_XILINX)
- ret_val = xilinx_dump( desc->devdesc, buf, bsize );
+ ret_val = xilinx_dump(desc->devdesc, buf, bsize);
#else
- fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
+ fpga_no_sup((char *)__func__, "Xilinx devices");
#endif
break;
case fpga_altera:
#if defined(CONFIG_FPGA_ALTERA)
- ret_val = altera_dump( desc->devdesc, buf, bsize );
+ ret_val = altera_dump(desc->devdesc, buf, bsize);
#else
- fpga_no_sup( (char *)__FUNCTION__, "Altera devices" );
+ fpga_no_sup((char *)__func__, "Altera devices");
#endif
break;
case fpga_lattice:
#if defined(CONFIG_FPGA_LATTICE)
ret_val = lattice_dump(desc->devdesc, buf, bsize);
#else
- fpga_no_sup( (char *)__FUNCTION__, "Lattice devices" );
+ fpga_no_sup((char *)__func__, "Lattice devices");
#endif
break;
default:
- printf( "%s: Invalid or unsupported device type %d\n",
- __FUNCTION__, desc->devtype );
+ printf("%s: Invalid or unsupported device type %d\n",
+ __func__, desc->devtype);
}
}
return ret_val;
}
-
-/* fpga_info
+/*
+ * fpga_info
* front end to fpga_dev_info. If devnum is invalid, report on all
* available devices.
*/
-int fpga_info( int devnum )
+int fpga_info(int devnum)
{
- if ( devnum == FPGA_INVALID_DEVICE ) {
- if ( next_desc > 0 ) {
+ if (devnum == FPGA_INVALID_DEVICE) {
+ if (next_desc > 0) {
int dev;
- for ( dev = 0; dev < next_desc; dev++ ) {
- fpga_dev_info( dev );
- }
+ for (dev = 0; dev < next_desc; dev++)
+ fpga_dev_info(dev);
+
return FPGA_SUCCESS;
} else {
- printf( "%s: No FPGA devices available.\n", __FUNCTION__ );
+ printf("%s: No FPGA devices available.\n", __func__);
return FPGA_FAIL;
}
}
- else return fpga_dev_info( devnum );
-}
-/* ------------------------------------------------------------------------- */
+ return fpga_dev_info(devnum);
+}
diff --git a/drivers/fpga/xilinx.c b/drivers/fpga/xilinx.c
index 32787b2..49e9437 100644
--- a/drivers/fpga/xilinx.c
+++ b/drivers/fpga/xilinx.c
@@ -1,4 +1,6 @@
/*
+ * (C) Copyright 2012-2013, Xilinx, Michal Simek
+ *
* (C) Copyright 2002
* Rich Ireland, Enterasys Networks, rireland@enterasys.com.
* Keith Outwater, keith_outwater@mvis.com
@@ -28,9 +30,11 @@
*/
#include <common.h>
+#include <fpga.h>
#include <virtex2.h>
#include <spartan2.h>
#include <spartan3.h>
+#include <zynqpl.h>
#if 0
#define FPGA_DEBUG
@@ -48,6 +52,112 @@
/* ------------------------------------------------------------------------- */
+int fpga_loadbitstream(int devnum, char *fpgadata, size_t size)
+{
+ unsigned int length;
+ unsigned int swapsize;
+ char buffer[80];
+ unsigned char *dataptr;
+ unsigned int i;
+ const fpga_desc *desc;
+ Xilinx_desc *xdesc;
+
+ dataptr = (unsigned char *)fpgadata;
+ /* Find out fpga_description */
+ desc = fpga_validate(devnum, dataptr, 0, (char *)__func__);
+ /* Assign xilinx device description */
+ xdesc = desc->devdesc;
+
+ /* skip the first bytes of the bitsteam, their meaning is unknown */
+ length = (*dataptr << 8) + *(dataptr + 1);
+ dataptr += 2;
+ dataptr += length;
+
+ /* get design name (identifier, length, string) */
+ length = (*dataptr << 8) + *(dataptr + 1);
+ dataptr += 2;
+ if (*dataptr++ != 0x61) {
+ debug("%s: Design name id not recognized in bitstream\n",
+ __func__);
+ return FPGA_FAIL;
+ }
+
+ length = (*dataptr << 8) + *(dataptr + 1);
+ dataptr += 2;
+ for (i = 0; i < length; i++)
+ buffer[i] = *dataptr++;
+
+ printf(" design filename = \"%s\"\n", buffer);
+
+ /* get part number (identifier, length, string) */
+ if (*dataptr++ != 0x62) {
+ printf("%s: Part number id not recognized in bitstream\n",
+ __func__);
+ return FPGA_FAIL;
+ }
+
+ length = (*dataptr << 8) + *(dataptr + 1);
+ dataptr += 2;
+ for (i = 0; i < length; i++)
+ buffer[i] = *dataptr++;
+
+ if (xdesc->name) {
+ i = strncmp(buffer, xdesc->name, strlen(xdesc->name));
+ if (i) {
+ printf("%s: Wrong bitstream ID for this device\n",
+ __func__);
+ printf("%s: Bitstream ID %s, current device ID %d/%s\n",
+ __func__, buffer, devnum, xdesc->name);
+ return FPGA_FAIL;
+ }
+ } else {
+ printf("%s: Please fill correct device ID to Xilinx_desc\n",
+ __func__);
+ }
+ printf(" part number = \"%s\"\n", buffer);
+
+ /* get date (identifier, length, string) */
+ if (*dataptr++ != 0x63) {
+ printf("%s: Date identifier not recognized in bitstream\n",
+ __func__);
+ return FPGA_FAIL;
+ }
+
+ length = (*dataptr << 8) + *(dataptr+1);
+ dataptr += 2;
+ for (i = 0; i < length; i++)
+ buffer[i] = *dataptr++;
+ printf(" date = \"%s\"\n", buffer);
+
+ /* get time (identifier, length, string) */
+ if (*dataptr++ != 0x64) {
+ printf("%s: Time identifier not recognized in bitstream\n",
+ __func__);
+ return FPGA_FAIL;
+ }
+
+ length = (*dataptr << 8) + *(dataptr+1);
+ dataptr += 2;
+ for (i = 0; i < length; i++)
+ buffer[i] = *dataptr++;
+ printf(" time = \"%s\"\n", buffer);
+
+ /* get fpga data length (identifier, length) */
+ if (*dataptr++ != 0x65) {
+ printf("%s: Data length id not recognized in bitstream\n",
+ __func__);
+ return FPGA_FAIL;
+ }
+ swapsize = ((unsigned int) *dataptr << 24) +
+ ((unsigned int) *(dataptr + 1) << 16) +
+ ((unsigned int) *(dataptr + 2) << 8) +
+ ((unsigned int) *(dataptr + 3));
+ dataptr += 4;
+ printf(" bytes in bitstream = %d\n", swapsize);
+
+ return fpga_load(devnum, dataptr, swapsize);
+}
+
int xilinx_load(Xilinx_desc *desc, const void *buf, size_t bsize)
{
int ret_val = FPGA_FAIL; /* assume a failure */
@@ -86,6 +196,16 @@
__FUNCTION__);
#endif
break;
+ case xilinx_zynq:
+#if defined(CONFIG_FPGA_ZYNQPL)
+ PRINTF("%s: Launching the Zynq PL Loader...\n",
+ __func__);
+ ret_val = zynq_load(desc, buf, bsize);
+#else
+ printf("%s: No support for Zynq devices.\n",
+ __func__);
+#endif
+ break;
default:
printf ("%s: Unsupported family type, %d\n",
@@ -133,6 +253,16 @@
__FUNCTION__);
#endif
break;
+ case xilinx_zynq:
+#if defined(CONFIG_FPGA_ZYNQPL)
+ PRINTF("%s: Launching the Zynq PL Reader...\n",
+ __func__);
+ ret_val = zynq_dump(desc, buf, bsize);
+#else
+ printf("%s: No support for Zynq devices.\n",
+ __func__);
+#endif
+ break;
default:
printf ("%s: Unsupported family type, %d\n",
@@ -158,6 +288,9 @@
case Xilinx_Virtex2:
printf ("Virtex-II\n");
break;
+ case xilinx_zynq:
+ printf("Zynq PL\n");
+ break;
/* Add new family types here */
default:
printf ("Unknown family type, %d\n", desc->family);
@@ -183,6 +316,9 @@
case master_selectmap:
printf ("Master SelectMap Mode\n");
break;
+ case devcfg:
+ printf("Device configuration interface (Zynq)\n");
+ break;
/* Add new interface types here */
default:
printf ("Unsupported interface type, %d\n", desc->iface);
@@ -191,6 +327,8 @@
printf ("Device Size: \t%d bytes\n"
"Cookie: \t0x%x (%d)\n",
desc->size, desc->cookie, desc->cookie);
+ if (desc->name)
+ printf("Device name: \t%s\n", desc->name);
if (desc->iface_fns) {
printf ("Device Function Table @ 0x%p\n", desc->iface_fns);
@@ -222,6 +360,14 @@
__FUNCTION__);
#endif
break;
+ case xilinx_zynq:
+#if defined(CONFIG_FPGA_ZYNQPL)
+ zynq_info(desc);
+#else
+ /* just in case */
+ printf("%s: No support for Zynq devices.\n",
+ __func__);
+#endif
/* Add new family types here */
default:
/* we don't need a message here - we give one up above */
diff --git a/drivers/fpga/zynqpl.c b/drivers/fpga/zynqpl.c
new file mode 100644
index 0000000..8feccde
--- /dev/null
+++ b/drivers/fpga/zynqpl.c
@@ -0,0 +1,355 @@
+/*
+ * (C) Copyright 2012-2013, Xilinx, Michal Simek
+ *
+ * (C) Copyright 2012
+ * Joe Hershberger <joe.hershberger@ni.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <zynqpl.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sys_proto.h>
+
+#define DEVCFG_CTRL_PCFG_PROG_B 0x40000000
+#define DEVCFG_ISR_FATAL_ERROR_MASK 0x00740040
+#define DEVCFG_ISR_ERROR_FLAGS_MASK 0x00340840
+#define DEVCFG_ISR_RX_FIFO_OV 0x00040000
+#define DEVCFG_ISR_DMA_DONE 0x00002000
+#define DEVCFG_ISR_PCFG_DONE 0x00000004
+#define DEVCFG_STATUS_DMA_CMD_Q_F 0x80000000
+#define DEVCFG_STATUS_DMA_CMD_Q_E 0x40000000
+#define DEVCFG_STATUS_DMA_DONE_CNT_MASK 0x30000000
+#define DEVCFG_STATUS_PCFG_INIT 0x00000010
+#define DEVCFG_MCTRL_RFIFO_FLUSH 0x00000002
+#define DEVCFG_MCTRL_WFIFO_FLUSH 0x00000001
+
+#ifndef CONFIG_SYS_FPGA_WAIT
+#define CONFIG_SYS_FPGA_WAIT CONFIG_SYS_HZ/100 /* 10 ms */
+#endif
+
+#ifndef CONFIG_SYS_FPGA_PROG_TIME
+#define CONFIG_SYS_FPGA_PROG_TIME CONFIG_SYS_HZ /* 1 s */
+#endif
+
+int zynq_info(Xilinx_desc *desc)
+{
+ return FPGA_SUCCESS;
+}
+
+#define DUMMY_WORD 0xffffffff
+
+/* Xilinx binary format header */
+static const u32 bin_format[] = {
+ DUMMY_WORD, /* Dummy words */
+ DUMMY_WORD,
+ DUMMY_WORD,
+ DUMMY_WORD,
+ DUMMY_WORD,
+ DUMMY_WORD,
+ DUMMY_WORD,
+ DUMMY_WORD,
+ 0x000000bb, /* Sync word */
+ 0x11220044, /* Sync word */
+ DUMMY_WORD,
+ DUMMY_WORD,
+ 0xaa995566, /* Sync word */
+};
+
+#define SWAP_NO 1
+#define SWAP_DONE 2
+
+/*
+ * Load the whole word from unaligned buffer
+ * Keep in your mind that it is byte loading on little-endian system
+ */
+static u32 load_word(const void *buf, u32 swap)
+{
+ u32 word = 0;
+ u8 *bitc = (u8 *)buf;
+ int p;
+
+ if (swap == SWAP_NO) {
+ for (p = 0; p < 4; p++) {
+ word <<= 8;
+ word |= bitc[p];
+ }
+ } else {
+ for (p = 3; p >= 0; p--) {
+ word <<= 8;
+ word |= bitc[p];
+ }
+ }
+
+ return word;
+}
+
+static u32 check_header(const void *buf)
+{
+ u32 i, pattern;
+ int swap = SWAP_NO;
+ u32 *test = (u32 *)buf;
+
+ debug("%s: Let's check bitstream header\n", __func__);
+
+ /* Checking that passing bin is not a bitstream */
+ for (i = 0; i < ARRAY_SIZE(bin_format); i++) {
+ pattern = load_word(&test[i], swap);
+
+ /*
+ * Bitstreams in binary format are swapped
+ * compare to regular bistream.
+ * Do not swap dummy word but if swap is done assume
+ * that parsing buffer is binary format
+ */
+ if ((__swab32(pattern) != DUMMY_WORD) &&
+ (__swab32(pattern) == bin_format[i])) {
+ pattern = __swab32(pattern);
+ swap = SWAP_DONE;
+ debug("%s: data swapped - let's swap\n", __func__);
+ }
+
+ debug("%s: %d/%x: pattern %x/%x bin_format\n", __func__, i,
+ (u32)&test[i], pattern, bin_format[i]);
+ if (pattern != bin_format[i]) {
+ debug("%s: Bitstream is not recognized\n", __func__);
+ return 0;
+ }
+ }
+ debug("%s: Found bitstream header at %x %s swapinng\n", __func__,
+ (u32)buf, swap == SWAP_NO ? "without" : "with");
+
+ return swap;
+}
+
+static void *check_data(u8 *buf, size_t bsize, u32 *swap)
+{
+ u32 word, p = 0; /* possition */
+
+ /* Because buf doesn't need to be aligned let's read it by chars */
+ for (p = 0; p < bsize; p++) {
+ word = load_word(&buf[p], SWAP_NO);
+ debug("%s: word %x %x/%x\n", __func__, word, p, (u32)&buf[p]);
+
+ /* Find the first bitstream dummy word */
+ if (word == DUMMY_WORD) {
+ debug("%s: Found dummy word at position %x/%x\n",
+ __func__, p, (u32)&buf[p]);
+ *swap = check_header(&buf[p]);
+ if (*swap) {
+ /* FIXME add full bitstream checking here */
+ return &buf[p];
+ }
+ }
+ /* Loop can be huge - support CTRL + C */
+ if (ctrlc())
+ return 0;
+ }
+ return 0;
+}
+
+
+int zynq_load(Xilinx_desc *desc, const void *buf, size_t bsize)
+{
+ unsigned long ts; /* Timestamp */
+ u32 partialbit = 0;
+ u32 i, control, isr_status, status, swap, diff;
+ u32 *buf_start;
+
+ /* Detect if we are going working with partial or full bitstream */
+ if (bsize != desc->size) {
+ printf("%s: Working with partial bitstream\n", __func__);
+ partialbit = 1;
+ }
+
+ buf_start = check_data((u8 *)buf, bsize, &swap);
+ if (!buf_start)
+ return FPGA_FAIL;
+
+ /* Check if data is postpone from start */
+ diff = (u32)buf_start - (u32)buf;
+ if (diff) {
+ printf("%s: Bitstream is not validated yet (diff %x)\n",
+ __func__, diff);
+ return FPGA_FAIL;
+ }
+
+ if ((u32)buf_start & 0x3) {
+ u32 *new_buf = (u32 *)((u32)buf & ~0x3);
+
+ printf("%s: Align buffer at %x to %x(swap %d)\n", __func__,
+ (u32)buf_start, (u32)new_buf, swap);
+
+ for (i = 0; i < (bsize/4); i++)
+ new_buf[i] = load_word(&buf_start[i], swap);
+
+ swap = SWAP_DONE;
+ buf = new_buf;
+ } else if (swap != SWAP_DONE) {
+ /* For bitstream which are aligned */
+ u32 *new_buf = (u32 *)buf;
+
+ printf("%s: Bitstream is not swapped(%d) - swap it\n", __func__,
+ swap);
+
+ for (i = 0; i < (bsize/4); i++)
+ new_buf[i] = load_word(&buf_start[i], swap);
+
+ swap = SWAP_DONE;
+ }
+
+ if (!partialbit) {
+ zynq_slcr_devcfg_disable();
+
+ /* Setting PCFG_PROG_B signal to high */
+ control = readl(&devcfg_base->ctrl);
+ writel(control | DEVCFG_CTRL_PCFG_PROG_B, &devcfg_base->ctrl);
+ /* Setting PCFG_PROG_B signal to low */
+ writel(control & ~DEVCFG_CTRL_PCFG_PROG_B, &devcfg_base->ctrl);
+
+ /* Polling the PCAP_INIT status for Reset */
+ ts = get_timer(0);
+ while (readl(&devcfg_base->status) & DEVCFG_STATUS_PCFG_INIT) {
+ if (get_timer(ts) > CONFIG_SYS_FPGA_WAIT) {
+ printf("%s: Timeout wait for INIT to clear\n",
+ __func__);
+ return FPGA_FAIL;
+ }
+ }
+
+ /* Setting PCFG_PROG_B signal to high */
+ writel(control | DEVCFG_CTRL_PCFG_PROG_B, &devcfg_base->ctrl);
+
+ /* Polling the PCAP_INIT status for Set */
+ ts = get_timer(0);
+ while (!(readl(&devcfg_base->status) &
+ DEVCFG_STATUS_PCFG_INIT)) {
+ if (get_timer(ts) > CONFIG_SYS_FPGA_WAIT) {
+ printf("%s: Timeout wait for INIT to set\n",
+ __func__);
+ return FPGA_FAIL;
+ }
+ }
+ }
+
+ isr_status = readl(&devcfg_base->int_sts);
+
+ /* Clear it all, so if Boot ROM comes back, it can proceed */
+ writel(0xFFFFFFFF, &devcfg_base->int_sts);
+
+ if (isr_status & DEVCFG_ISR_FATAL_ERROR_MASK) {
+ debug("%s: Fatal errors in PCAP 0x%X\n", __func__, isr_status);
+
+ /* If RX FIFO overflow, need to flush RX FIFO first */
+ if (isr_status & DEVCFG_ISR_RX_FIFO_OV) {
+ writel(DEVCFG_MCTRL_RFIFO_FLUSH, &devcfg_base->mctrl);
+ writel(0xFFFFFFFF, &devcfg_base->int_sts);
+ }
+ return FPGA_FAIL;
+ }
+
+ status = readl(&devcfg_base->status);
+
+ debug("%s: Status = 0x%08X\n", __func__, status);
+
+ if (status & DEVCFG_STATUS_DMA_CMD_Q_F) {
+ debug("%s: Error: device busy\n", __func__);
+ return FPGA_FAIL;
+ }
+
+ debug("%s: Device ready\n", __func__);
+
+ if (!(status & DEVCFG_STATUS_DMA_CMD_Q_E)) {
+ if (!(readl(&devcfg_base->int_sts) & DEVCFG_ISR_DMA_DONE)) {
+ /* Error state, transfer cannot occur */
+ debug("%s: ISR indicates error\n", __func__);
+ return FPGA_FAIL;
+ } else {
+ /* Clear out the status */
+ writel(DEVCFG_ISR_DMA_DONE, &devcfg_base->int_sts);
+ }
+ }
+
+ if (status & DEVCFG_STATUS_DMA_DONE_CNT_MASK) {
+ /* Clear the count of completed DMA transfers */
+ writel(DEVCFG_STATUS_DMA_DONE_CNT_MASK, &devcfg_base->status);
+ }
+
+ debug("%s: Source = 0x%08X\n", __func__, (u32)buf);
+ debug("%s: Size = %zu\n", __func__, bsize);
+
+ /* Set up the transfer */
+ writel((u32)buf | 1, &devcfg_base->dma_src_addr);
+ writel(0xFFFFFFFF, &devcfg_base->dma_dst_addr);
+ writel(bsize >> 2, &devcfg_base->dma_src_len);
+ writel(0, &devcfg_base->dma_dst_len);
+
+ isr_status = readl(&devcfg_base->int_sts);
+
+ /* Polling the PCAP_INIT status for Set */
+ ts = get_timer(0);
+ while (!(isr_status & DEVCFG_ISR_DMA_DONE)) {
+ if (isr_status & DEVCFG_ISR_ERROR_FLAGS_MASK) {
+ debug("%s: Error: isr = 0x%08X\n", __func__,
+ isr_status);
+ debug("%s: Write count = 0x%08X\n", __func__,
+ readl(&devcfg_base->write_count));
+ debug("%s: Read count = 0x%08X\n", __func__,
+ readl(&devcfg_base->read_count));
+
+ return FPGA_FAIL;
+ }
+ if (get_timer(ts) > CONFIG_SYS_FPGA_PROG_TIME) {
+ printf("%s: Timeout wait for DMA to complete\n",
+ __func__);
+ return FPGA_FAIL;
+ }
+ isr_status = readl(&devcfg_base->int_sts);
+ }
+
+ debug("%s: DMA transfer is done\n", __func__);
+
+ /* Check FPGA configuration completion */
+ ts = get_timer(0);
+ while (!(isr_status & DEVCFG_ISR_PCFG_DONE)) {
+ if (get_timer(ts) > CONFIG_SYS_FPGA_WAIT) {
+ printf("%s: Timeout wait for FPGA to config\n",
+ __func__);
+ return FPGA_FAIL;
+ }
+ isr_status = readl(&devcfg_base->int_sts);
+ }
+
+ debug("%s: FPGA config done\n", __func__);
+
+ /* Clear out the DMA status */
+ writel(DEVCFG_ISR_DMA_DONE, &devcfg_base->int_sts);
+
+ if (!partialbit)
+ zynq_slcr_devcfg_enable();
+
+ return FPGA_SUCCESS;
+}
+
+int zynq_dump(Xilinx_desc *desc, const void *buf, size_t bsize)
+{
+ return FPGA_FAIL;
+}
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 5dbdbe3..72e85a3 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -46,6 +46,7 @@
COBJS-$(CONFIG_U8500_I2C) += u8500_i2c.o
COBJS-$(CONFIG_SH_I2C) += sh_i2c.o
COBJS-$(CONFIG_SH_SH7734_I2C) += sh_sh7734_i2c.o
+COBJS-$(CONFIG_ZYNQ_I2C) += zynq_i2c.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index 54e9b15..ef38d71 100644
--- a/drivers/i2c/omap24xx_i2c.c
+++ b/drivers/i2c/omap24xx_i2c.c
@@ -18,6 +18,20 @@
*
* Adapted for OMAP2420 I2C, r-woodruff2@ti.com
*
+ * Copyright (c) 2013 Lubomir Popov <lpopov@mm-sol.com>, MM Solutions
+ * New i2c_read, i2c_write and i2c_probe functions, tested on OMAP4
+ * (4430/60/70), OMAP5 (5430) and AM335X (3359); should work on older
+ * OMAPs and derivatives as well. The only anticipated exception would
+ * be the OMAP2420, which shall require driver modification.
+ * - Rewritten i2c_read to operate correctly with all types of chips
+ * (old function could not read consistent data from some I2C slaves).
+ * - Optimized i2c_write.
+ * - New i2c_probe, performs write access vs read. The old probe could
+ * hang the system under certain conditions (e.g. unconfigured pads).
+ * - The read/write/probe functions try to identify unconfigured bus.
+ * - Status functions now read irqstatus_raw as per TRM guidelines
+ * (except for OMAP243X and OMAP34XX).
+ * - Driver now supports up to I2C5 (OMAP5).
*/
#include <common.h>
@@ -31,8 +45,11 @@
#define I2C_TIMEOUT 1000
+/* Absolutely safe for status update at 100 kHz I2C: */
+#define I2C_WAIT 200
+
static int wait_for_bb(void);
-static u16 wait_for_pin(void);
+static u16 wait_for_event(void);
static void flush_fifo(void);
/*
@@ -137,10 +154,14 @@
/* own address */
writew(slaveadd, &i2c_base->oa);
writew(I2C_CON_EN, &i2c_base->con);
-
- /* have to enable intrrupts or OMAP i2c module doesn't work */
+#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
+ /*
+ * Have to enable interrupts for OMAP2/3, these IPs don't have
+ * an 'irqstatus_raw' register and we shall have to poll 'stat'
+ */
writew(I2C_IE_XRDY_IE | I2C_IE_RRDY_IE | I2C_IE_ARDY_IE |
- I2C_IE_NACK_IE | I2C_IE_AL_IE, &i2c_base->ie);
+ I2C_IE_NACK_IE | I2C_IE_AL_IE, &i2c_base->ie);
+#endif
udelay(1000);
flush_fifo();
writew(0xFFFF, &i2c_base->stat);
@@ -150,88 +171,6 @@
bus_initialized[current_bus] = 1;
}
-static int i2c_read_byte(u8 devaddr, u16 regoffset, u8 alen, u8 *value)
-{
- int i2c_error = 0;
- u16 status;
- int i = 2 - alen;
- u8 tmpbuf[2] = {(regoffset) >> 8, regoffset & 0xff};
- u16 w;
-
- /* wait until bus not busy */
- if (wait_for_bb())
- return 1;
-
- /* one byte only */
- writew(alen, &i2c_base->cnt);
- /* set slave address */
- writew(devaddr, &i2c_base->sa);
- /* no stop bit needed here */
- writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT |
- I2C_CON_TRX, &i2c_base->con);
-
- /* send register offset */
- while (1) {
- status = wait_for_pin();
- if (status == 0 || status & I2C_STAT_NACK) {
- i2c_error = 1;
- goto read_exit;
- }
- if (status & I2C_STAT_XRDY) {
- w = tmpbuf[i++];
-#if !(defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
- defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX) || \
- defined(CONFIG_OMAP54XX))
- w |= tmpbuf[i++] << 8;
-#endif
- writew(w, &i2c_base->data);
- writew(I2C_STAT_XRDY, &i2c_base->stat);
- }
- if (status & I2C_STAT_ARDY) {
- writew(I2C_STAT_ARDY, &i2c_base->stat);
- break;
- }
- }
-
- /* set slave address */
- writew(devaddr, &i2c_base->sa);
- /* read one byte from slave */
- writew(1, &i2c_base->cnt);
- /* need stop bit here */
- writew(I2C_CON_EN | I2C_CON_MST |
- I2C_CON_STT | I2C_CON_STP,
- &i2c_base->con);
-
- /* receive data */
- while (1) {
- status = wait_for_pin();
- if (status == 0 || status & I2C_STAT_NACK) {
- i2c_error = 1;
- goto read_exit;
- }
- if (status & I2C_STAT_RRDY) {
-#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
- defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX) || \
- defined(CONFIG_OMAP54XX)
- *value = readb(&i2c_base->data);
-#else
- *value = readw(&i2c_base->data);
-#endif
- writew(I2C_STAT_RRDY, &i2c_base->stat);
- }
- if (status & I2C_STAT_ARDY) {
- writew(I2C_STAT_ARDY, &i2c_base->stat);
- break;
- }
- }
-
-read_exit:
- flush_fifo();
- writew(0xFFFF, &i2c_base->stat);
- writew(0, &i2c_base->cnt);
- return i2c_error;
-}
-
static void flush_fifo(void)
{ u16 stat;
@@ -241,13 +180,7 @@
while (1) {
stat = readw(&i2c_base->stat);
if (stat == I2C_STAT_RRDY) {
-#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
- defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX) || \
- defined(CONFIG_OMAP54XX)
readb(&i2c_base->data);
-#else
- readw(&i2c_base->data);
-#endif
writew(I2C_STAT_RRDY, &i2c_base->stat);
udelay(1000);
} else
@@ -255,6 +188,10 @@
}
}
+/*
+ * i2c_probe: Use write access. Allows to identify addresses that are
+ * write-only (like the config register of dual-port EEPROMs)
+ */
int i2c_probe(uchar chip)
{
u16 status;
@@ -263,61 +200,81 @@
if (chip == readw(&i2c_base->oa))
return res;
- /* wait until bus not busy */
+ /* Wait until bus is free */
if (wait_for_bb())
return res;
- /* try to read one byte */
- writew(1, &i2c_base->cnt);
- /* set slave address */
+ /* No data transfer, slave addr only */
+ writew(0, &i2c_base->cnt);
+ /* Set slave address */
writew(chip, &i2c_base->sa);
- /* stop bit needed here */
- writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP, &i2c_base->con);
+ /* Stop bit needed here */
+ writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX |
+ I2C_CON_STP, &i2c_base->con);
- while (1) {
- status = wait_for_pin();
- if (status == 0 || status & I2C_STAT_AL) {
- res = 1;
- goto probe_exit;
- }
- if (status & I2C_STAT_NACK) {
- res = 1;
- writew(0xff, &i2c_base->stat);
- writew (readw (&i2c_base->con) | I2C_CON_STP, &i2c_base->con);
+ status = wait_for_event();
- if (wait_for_bb())
- res = 1;
+ if ((status & ~I2C_STAT_XRDY) == 0 || (status & I2C_STAT_AL)) {
+ /*
+ * With current high-level command implementation, notifying
+ * the user shall flood the console with 127 messages. If
+ * silent exit is desired upon unconfigured bus, remove the
+ * following 'if' section:
+ */
+ if (status == I2C_STAT_XRDY)
+ printf("i2c_probe: pads on bus %d probably not configured (status=0x%x)\n",
+ current_bus, status);
- break;
- }
- if (status & I2C_STAT_ARDY) {
- writew(I2C_STAT_ARDY, &i2c_base->stat);
- break;
- }
- if (status & I2C_STAT_RRDY) {
- res = 0;
-#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
- defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX) || \
- defined(CONFIG_OMAP54XX)
- readb(&i2c_base->data);
-#else
- readw(&i2c_base->data);
-#endif
- writew(I2C_STAT_RRDY, &i2c_base->stat);
- }
+ goto pr_exit;
}
-probe_exit:
+ /* Check for ACK (!NAK) */
+ if (!(status & I2C_STAT_NACK)) {
+ res = 0; /* Device found */
+ udelay(I2C_WAIT); /* Required by AM335X in SPL */
+ /* Abort transfer (force idle state) */
+ writew(I2C_CON_MST | I2C_CON_TRX, &i2c_base->con); /* Reset */
+ udelay(1000);
+ writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_TRX |
+ I2C_CON_STP, &i2c_base->con); /* STP */
+ }
+pr_exit:
flush_fifo();
- /* don't allow any more data in... we don't want it. */
- writew(0, &i2c_base->cnt);
writew(0xFFFF, &i2c_base->stat);
+ writew(0, &i2c_base->cnt);
return res;
}
+/*
+ * i2c_read: Function now uses a single I2C read transaction with bulk transfer
+ * of the requested number of bytes (note that the 'i2c md' command
+ * limits this to 16 bytes anyway). If CONFIG_I2C_REPEATED_START is
+ * defined in the board config header, this transaction shall be with
+ * Repeated Start (Sr) between the address and data phases; otherwise
+ * Stop-Start (P-S) shall be used (some I2C chips do require a P-S).
+ * The address (reg offset) may be 0, 1 or 2 bytes long.
+ * Function now reads correctly from chips that return more than one
+ * byte of data per addressed register (like TI temperature sensors),
+ * or that do not need a register address at all (such as some clock
+ * distributors).
+ */
int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
{
- int i;
+ int i2c_error = 0;
+ u16 status;
+
+ if (alen < 0) {
+ puts("I2C read: addr len < 0\n");
+ return 1;
+ }
+ if (len < 0) {
+ puts("I2C read: data len < 0\n");
+ return 1;
+ }
+ if (buffer == NULL) {
+ puts("I2C read: NULL pointer passed\n");
+ return 1;
+ }
if (alen > 2) {
printf("I2C read: addr len %d not supported\n", alen);
@@ -329,24 +286,122 @@
return 1;
}
- for (i = 0; i < len; i++) {
- if (i2c_read_byte(chip, addr + i, alen, &buffer[i])) {
- puts("I2C read: I/O error\n");
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
- return 1;
+ /* Wait until bus not busy */
+ if (wait_for_bb())
+ return 1;
+
+ /* Zero, one or two bytes reg address (offset) */
+ writew(alen, &i2c_base->cnt);
+ /* Set slave address */
+ writew(chip, &i2c_base->sa);
+
+ if (alen) {
+ /* Must write reg offset first */
+#ifdef CONFIG_I2C_REPEATED_START
+ /* No stop bit, use Repeated Start (Sr) */
+ writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT |
+ I2C_CON_TRX, &i2c_base->con);
+#else
+ /* Stop - Start (P-S) */
+ writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP |
+ I2C_CON_TRX, &i2c_base->con);
+#endif
+ /* Send register offset */
+ while (1) {
+ status = wait_for_event();
+ /* Try to identify bus that is not padconf'd for I2C */
+ if (status == I2C_STAT_XRDY) {
+ i2c_error = 2;
+ printf("i2c_read (addr phase): pads on bus %d probably not configured (status=0x%x)\n",
+ current_bus, status);
+ goto rd_exit;
+ }
+ if (status == 0 || status & I2C_STAT_NACK) {
+ i2c_error = 1;
+ printf("i2c_read: error waiting for addr ACK (status=0x%x)\n",
+ status);
+ goto rd_exit;
+ }
+ if (alen) {
+ if (status & I2C_STAT_XRDY) {
+ alen--;
+ /* Do we have to use byte access? */
+ writeb((addr >> (8 * alen)) & 0xff,
+ &i2c_base->data);
+ writew(I2C_STAT_XRDY, &i2c_base->stat);
+ }
+ }
+ if (status & I2C_STAT_ARDY) {
+ writew(I2C_STAT_ARDY, &i2c_base->stat);
+ break;
+ }
+ }
+ }
+ /* Set slave address */
+ writew(chip, &i2c_base->sa);
+ /* Read len bytes from slave */
+ writew(len, &i2c_base->cnt);
+ /* Need stop bit here */
+ writew(I2C_CON_EN | I2C_CON_MST |
+ I2C_CON_STT | I2C_CON_STP,
+ &i2c_base->con);
+
+ /* Receive data */
+ while (1) {
+ status = wait_for_event();
+ /*
+ * Try to identify bus that is not padconf'd for I2C. This
+ * state could be left over from previous transactions if
+ * the address phase is skipped due to alen=0.
+ */
+ if (status == I2C_STAT_XRDY) {
+ i2c_error = 2;
+ printf("i2c_read (data phase): pads on bus %d probably not configured (status=0x%x)\n",
+ current_bus, status);
+ goto rd_exit;
+ }
+ if (status == 0 || status & I2C_STAT_NACK) {
+ i2c_error = 1;
+ goto rd_exit;
+ }
+ if (status & I2C_STAT_RRDY) {
+ *buffer++ = readb(&i2c_base->data);
+ writew(I2C_STAT_RRDY, &i2c_base->stat);
+ }
+ if (status & I2C_STAT_ARDY) {
+ writew(I2C_STAT_ARDY, &i2c_base->stat);
+ break;
}
}
- return 0;
+rd_exit:
+ flush_fifo();
+ writew(0xFFFF, &i2c_base->stat);
+ writew(0, &i2c_base->cnt);
+ return i2c_error;
}
+/* i2c_write: Address (reg offset) may be 0, 1 or 2 bytes long. */
int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
{
int i;
u16 status;
int i2c_error = 0;
- u16 w;
- u8 tmpbuf[2] = {addr >> 8, addr & 0xff};
+
+ if (alen < 0) {
+ puts("I2C write: addr len < 0\n");
+ return 1;
+ }
+
+ if (len < 0) {
+ puts("I2C write: data len < 0\n");
+ return 1;
+ }
+
+ if (buffer == NULL) {
+ puts("I2C write: NULL pointer passed\n");
+ return 1;
+ }
if (alen > 2) {
printf("I2C write: addr len %d not supported\n", alen);
@@ -355,92 +410,137 @@
if (addr + len > (1 << 16)) {
printf("I2C write: address 0x%x + 0x%x out of range\n",
- addr, len);
+ addr, len);
return 1;
}
- /* wait until bus not busy */
+ /* Wait until bus not busy */
if (wait_for_bb())
return 1;
- /* start address phase - will write regoffset + len bytes data */
- /* TODO consider case when !CONFIG_OMAP243X/34XX/44XX */
+ /* Start address phase - will write regoffset + len bytes data */
writew(alen + len, &i2c_base->cnt);
- /* set slave address */
+ /* Set slave address */
writew(chip, &i2c_base->sa);
- /* stop bit needed here */
+ /* Stop bit needed here */
writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX |
- I2C_CON_STP, &i2c_base->con);
+ I2C_CON_STP, &i2c_base->con);
- /* Send address and data */
- for (i = -alen; i < len; i++) {
- status = wait_for_pin();
-
+ while (alen) {
+ /* Must write reg offset (one or two bytes) */
+ status = wait_for_event();
+ /* Try to identify bus that is not padconf'd for I2C */
+ if (status == I2C_STAT_XRDY) {
+ i2c_error = 2;
+ printf("i2c_write: pads on bus %d probably not configured (status=0x%x)\n",
+ current_bus, status);
+ goto wr_exit;
+ }
if (status == 0 || status & I2C_STAT_NACK) {
i2c_error = 1;
- printf("i2c error waiting for data ACK (status=0x%x)\n",
- status);
- goto write_exit;
+ printf("i2c_write: error waiting for addr ACK (status=0x%x)\n",
+ status);
+ goto wr_exit;
}
-
if (status & I2C_STAT_XRDY) {
- w = (i < 0) ? tmpbuf[2+i] : buffer[i];
-#if !(defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
- defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX) || \
- defined(CONFIG_OMAP54XX))
- w |= ((++i < 0) ? tmpbuf[2+i] : buffer[i]) << 8;
-#endif
- writew(w, &i2c_base->data);
+ alen--;
+ writeb((addr >> (8 * alen)) & 0xff, &i2c_base->data);
writew(I2C_STAT_XRDY, &i2c_base->stat);
} else {
i2c_error = 1;
- printf("i2c bus not ready for Tx (i=%d)\n", i);
- goto write_exit;
+ printf("i2c_write: bus not ready for addr Tx (status=0x%x)\n",
+ status);
+ goto wr_exit;
+ }
+ }
+ /* Address phase is over, now write data */
+ for (i = 0; i < len; i++) {
+ status = wait_for_event();
+ if (status == 0 || status & I2C_STAT_NACK) {
+ i2c_error = 1;
+ printf("i2c_write: error waiting for data ACK (status=0x%x)\n",
+ status);
+ goto wr_exit;
+ }
+ if (status & I2C_STAT_XRDY) {
+ writeb(buffer[i], &i2c_base->data);
+ writew(I2C_STAT_XRDY, &i2c_base->stat);
+ } else {
+ i2c_error = 1;
+ printf("i2c_write: bus not ready for data Tx (i=%d)\n",
+ i);
+ goto wr_exit;
}
}
-write_exit:
+wr_exit:
flush_fifo();
writew(0xFFFF, &i2c_base->stat);
+ writew(0, &i2c_base->cnt);
return i2c_error;
}
+/*
+ * Wait for the bus to be free by checking the Bus Busy (BB)
+ * bit to become clear
+ */
static int wait_for_bb(void)
{
int timeout = I2C_TIMEOUT;
u16 stat;
writew(0xFFFF, &i2c_base->stat); /* clear current interrupts...*/
+#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
while ((stat = readw(&i2c_base->stat) & I2C_STAT_BB) && timeout--) {
+#else
+ /* Read RAW status */
+ while ((stat = readw(&i2c_base->irqstatus_raw) &
+ I2C_STAT_BB) && timeout--) {
+#endif
writew(stat, &i2c_base->stat);
- udelay(1000);
+ udelay(I2C_WAIT);
}
if (timeout <= 0) {
- printf("timed out in wait_for_bb: I2C_STAT=%x\n",
- readw(&i2c_base->stat));
+ printf("Timed out in wait_for_bb: status=%04x\n",
+ stat);
return 1;
}
writew(0xFFFF, &i2c_base->stat); /* clear delayed stuff*/
return 0;
}
-static u16 wait_for_pin(void)
+/*
+ * Wait for the I2C controller to complete current action
+ * and update status
+ */
+static u16 wait_for_event(void)
{
u16 status;
int timeout = I2C_TIMEOUT;
do {
- udelay(1000);
+ udelay(I2C_WAIT);
+#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
status = readw(&i2c_base->stat);
+#else
+ /* Read RAW status */
+ status = readw(&i2c_base->irqstatus_raw);
+#endif
} while (!(status &
(I2C_STAT_ROVR | I2C_STAT_XUDF | I2C_STAT_XRDY |
I2C_STAT_RRDY | I2C_STAT_ARDY | I2C_STAT_NACK |
I2C_STAT_AL)) && timeout--);
if (timeout <= 0) {
- printf("timed out in wait_for_pin: I2C_STAT=%x\n",
- readw(&i2c_base->stat));
+ printf("Timed out in wait_for_event: status=%04x\n",
+ status);
+ /*
+ * If status is still 0 here, probably the bus pads have
+ * not been configured for I2C, and/or pull-ups are missing.
+ */
+ printf("Check if pads/pull-ups of bus %d are properly configured\n",
+ current_bus);
writew(0xFFFF, &i2c_base->stat);
status = 0;
}
@@ -450,28 +550,36 @@
int i2c_set_bus_num(unsigned int bus)
{
- if ((bus < 0) || (bus >= I2C_BUS_MAX)) {
- printf("Bad bus: %d\n", bus);
+ if (bus >= I2C_BUS_MAX) {
+ printf("Bad bus: %x\n", bus);
return -1;
}
-#if I2C_BUS_MAX == 4
- if (bus == 3)
- i2c_base = (struct i2c *)I2C_BASE4;
- else
- if (bus == 2)
- i2c_base = (struct i2c *)I2C_BASE3;
- else
-#endif
-#if I2C_BUS_MAX == 3
- if (bus == 2)
- i2c_base = (struct i2c *)I2C_BASE3;
- else
-#endif
- if (bus == 1)
- i2c_base = (struct i2c *)I2C_BASE2;
- else
+ switch (bus) {
+ default:
+ bus = 0; /* Fall through */
+ case 0:
i2c_base = (struct i2c *)I2C_BASE1;
+ break;
+ case 1:
+ i2c_base = (struct i2c *)I2C_BASE2;
+ break;
+#if (I2C_BUS_MAX > 2)
+ case 2:
+ i2c_base = (struct i2c *)I2C_BASE3;
+ break;
+#if (I2C_BUS_MAX > 3)
+ case 3:
+ i2c_base = (struct i2c *)I2C_BASE4;
+ break;
+#if (I2C_BUS_MAX > 4)
+ case 4:
+ i2c_base = (struct i2c *)I2C_BASE5;
+ break;
+#endif
+#endif
+#endif
+ }
current_bus = bus;
diff --git a/drivers/i2c/zynq_i2c.c b/drivers/i2c/zynq_i2c.c
new file mode 100644
index 0000000..ec49660
--- /dev/null
+++ b/drivers/i2c/zynq_i2c.c
@@ -0,0 +1,306 @@
+/*
+ * Driver for the Zynq-7000 PS I2C controller
+ * IP from Cadence (ID T-CS-PE-0007-100, Version R1p10f2)
+ *
+ * Author: Joe Hershberger <joe.hershberger@ni.com>
+ * Copyright (c) 2012 Joe Hershberger.
+ *
+ * Copyright (c) 2012-2013 Xilinx, Michal Simek
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <i2c.h>
+#include <asm/errno.h>
+#include <asm/arch/hardware.h>
+
+/* i2c register set */
+struct zynq_i2c_registers {
+ u32 control;
+ u32 status;
+ u32 address;
+ u32 data;
+ u32 interrupt_status;
+ u32 transfer_size;
+ u32 slave_mon_pause;
+ u32 time_out;
+ u32 interrupt_mask;
+ u32 interrupt_enable;
+ u32 interrupt_disable;
+};
+
+/* Control register fields */
+#define ZYNQ_I2C_CONTROL_RW 0x00000001
+#define ZYNQ_I2C_CONTROL_MS 0x00000002
+#define ZYNQ_I2C_CONTROL_NEA 0x00000004
+#define ZYNQ_I2C_CONTROL_ACKEN 0x00000008
+#define ZYNQ_I2C_CONTROL_HOLD 0x00000010
+#define ZYNQ_I2C_CONTROL_SLVMON 0x00000020
+#define ZYNQ_I2C_CONTROL_CLR_FIFO 0x00000040
+#define ZYNQ_I2C_CONTROL_DIV_B_SHIFT 8
+#define ZYNQ_I2C_CONTROL_DIV_B_MASK 0x00003F00
+#define ZYNQ_I2C_CONTROL_DIV_A_SHIFT 14
+#define ZYNQ_I2C_CONTROL_DIV_A_MASK 0x0000C000
+
+/* Status register values */
+#define ZYNQ_I2C_STATUS_RXDV 0x00000020
+#define ZYNQ_I2C_STATUS_TXDV 0x00000040
+#define ZYNQ_I2C_STATUS_RXOVF 0x00000080
+#define ZYNQ_I2C_STATUS_BA 0x00000100
+
+/* Interrupt register fields */
+#define ZYNQ_I2C_INTERRUPT_COMP 0x00000001
+#define ZYNQ_I2C_INTERRUPT_DATA 0x00000002
+#define ZYNQ_I2C_INTERRUPT_NACK 0x00000004
+#define ZYNQ_I2C_INTERRUPT_TO 0x00000008
+#define ZYNQ_I2C_INTERRUPT_SLVRDY 0x00000010
+#define ZYNQ_I2C_INTERRUPT_RXOVF 0x00000020
+#define ZYNQ_I2C_INTERRUPT_TXOVF 0x00000040
+#define ZYNQ_I2C_INTERRUPT_RXUNF 0x00000080
+#define ZYNQ_I2C_INTERRUPT_ARBLOST 0x00000200
+
+#define ZYNQ_I2C_FIFO_DEPTH 16
+#define ZYNQ_I2C_TRANSFERT_SIZE_MAX 255 /* Controller transfer limit */
+
+#if defined(CONFIG_ZYNQ_I2C0)
+# define ZYNQ_I2C_BASE ZYNQ_I2C_BASEADDR0
+#else
+# define ZYNQ_I2C_BASE ZYNQ_I2C_BASEADDR1
+#endif
+
+static struct zynq_i2c_registers *zynq_i2c =
+ (struct zynq_i2c_registers *)ZYNQ_I2C_BASE;
+
+/* I2C init called by cmd_i2c when doing 'i2c reset'. */
+void i2c_init(int requested_speed, int slaveadd)
+{
+ /* 111MHz / ( (3 * 17) * 22 ) = ~100KHz */
+ writel((16 << ZYNQ_I2C_CONTROL_DIV_B_SHIFT) |
+ (2 << ZYNQ_I2C_CONTROL_DIV_A_SHIFT), &zynq_i2c->control);
+
+ /* Enable master mode, ack, and 7-bit addressing */
+ setbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_MS |
+ ZYNQ_I2C_CONTROL_ACKEN | ZYNQ_I2C_CONTROL_NEA);
+}
+
+#ifdef DEBUG
+static void zynq_i2c_debug_status(void)
+{
+ int int_status;
+ int status;
+ int_status = readl(&zynq_i2c->interrupt_status);
+
+ status = readl(&zynq_i2c->status);
+ if (int_status || status) {
+ debug("Status: ");
+ if (int_status & ZYNQ_I2C_INTERRUPT_COMP)
+ debug("COMP ");
+ if (int_status & ZYNQ_I2C_INTERRUPT_DATA)
+ debug("DATA ");
+ if (int_status & ZYNQ_I2C_INTERRUPT_NACK)
+ debug("NACK ");
+ if (int_status & ZYNQ_I2C_INTERRUPT_TO)
+ debug("TO ");
+ if (int_status & ZYNQ_I2C_INTERRUPT_SLVRDY)
+ debug("SLVRDY ");
+ if (int_status & ZYNQ_I2C_INTERRUPT_RXOVF)
+ debug("RXOVF ");
+ if (int_status & ZYNQ_I2C_INTERRUPT_TXOVF)
+ debug("TXOVF ");
+ if (int_status & ZYNQ_I2C_INTERRUPT_RXUNF)
+ debug("RXUNF ");
+ if (int_status & ZYNQ_I2C_INTERRUPT_ARBLOST)
+ debug("ARBLOST ");
+ if (status & ZYNQ_I2C_STATUS_RXDV)
+ debug("RXDV ");
+ if (status & ZYNQ_I2C_STATUS_TXDV)
+ debug("TXDV ");
+ if (status & ZYNQ_I2C_STATUS_RXOVF)
+ debug("RXOVF ");
+ if (status & ZYNQ_I2C_STATUS_BA)
+ debug("BA ");
+ debug("TS%d ", readl(&zynq_i2c->transfer_size));
+ debug("\n");
+ }
+}
+#endif
+
+/* Wait for an interrupt */
+static u32 zynq_i2c_wait(u32 mask)
+{
+ int timeout, int_status;
+
+ for (timeout = 0; timeout < 100; timeout++) {
+ udelay(100);
+ int_status = readl(&zynq_i2c->interrupt_status);
+ if (int_status & mask)
+ break;
+ }
+#ifdef DEBUG
+ zynq_i2c_debug_status();
+#endif
+ /* Clear interrupt status flags */
+ writel(int_status & mask, &zynq_i2c->interrupt_status);
+
+ return int_status & mask;
+}
+
+/*
+ * I2C probe called by cmd_i2c when doing 'i2c probe'.
+ * Begin read, nak data byte, end.
+ */
+int i2c_probe(u8 dev)
+{
+ /* Attempt to read a byte */
+ setbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_CLR_FIFO |
+ ZYNQ_I2C_CONTROL_RW);
+ clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD);
+ writel(0xFF, &zynq_i2c->interrupt_status);
+ writel(dev, &zynq_i2c->address);
+ writel(1, &zynq_i2c->transfer_size);
+
+ return (zynq_i2c_wait(ZYNQ_I2C_INTERRUPT_COMP |
+ ZYNQ_I2C_INTERRUPT_NACK) &
+ ZYNQ_I2C_INTERRUPT_COMP) ? 0 : -ETIMEDOUT;
+}
+
+/*
+ * I2C read called by cmd_i2c when doing 'i2c read' and by cmd_eeprom.c
+ * Begin write, send address byte(s), begin read, receive data bytes, end.
+ */
+int i2c_read(u8 dev, uint addr, int alen, u8 *data, int length)
+{
+ u32 status;
+ u32 i = 0;
+ u8 *cur_data = data;
+
+ /* Check the hardware can handle the requested bytes */
+ if ((length < 0) || (length > ZYNQ_I2C_TRANSFERT_SIZE_MAX))
+ return -EINVAL;
+
+ /* Write the register address */
+ setbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_CLR_FIFO |
+ ZYNQ_I2C_CONTROL_HOLD);
+ /*
+ * Temporarily disable restart (by clearing hold)
+ * It doesn't seem to work.
+ */
+ clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_RW |
+ ZYNQ_I2C_CONTROL_HOLD);
+ writel(0xFF, &zynq_i2c->interrupt_status);
+ while (alen--)
+ writel(addr >> (8*alen), &zynq_i2c->data);
+ writel(dev, &zynq_i2c->address);
+
+ /* Wait for the address to be sent */
+ if (!zynq_i2c_wait(ZYNQ_I2C_INTERRUPT_COMP)) {
+ /* Release the bus */
+ clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD);
+ return -ETIMEDOUT;
+ }
+ debug("Device acked address\n");
+
+ setbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_CLR_FIFO |
+ ZYNQ_I2C_CONTROL_RW);
+ /* Start reading data */
+ writel(dev, &zynq_i2c->address);
+ writel(length, &zynq_i2c->transfer_size);
+
+ /* Wait for data */
+ do {
+ status = zynq_i2c_wait(ZYNQ_I2C_INTERRUPT_COMP |
+ ZYNQ_I2C_INTERRUPT_DATA);
+ if (!status) {
+ /* Release the bus */
+ clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD);
+ return -ETIMEDOUT;
+ }
+ debug("Read %d bytes\n",
+ length - readl(&zynq_i2c->transfer_size));
+ for (; i < length - readl(&zynq_i2c->transfer_size); i++)
+ *(cur_data++) = readl(&zynq_i2c->data);
+ } while (readl(&zynq_i2c->transfer_size) != 0);
+ /* All done... release the bus */
+ clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD);
+
+#ifdef DEBUG
+ zynq_i2c_debug_status();
+#endif
+ return 0;
+}
+
+/*
+ * I2C write called by cmd_i2c when doing 'i2c write' and by cmd_eeprom.c
+ * Begin write, send address byte(s), send data bytes, end.
+ */
+int i2c_write(u8 dev, uint addr, int alen, u8 *data, int length)
+{
+ u8 *cur_data = data;
+
+ /* Write the register address */
+ setbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_CLR_FIFO |
+ ZYNQ_I2C_CONTROL_HOLD);
+ clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_RW);
+ writel(0xFF, &zynq_i2c->interrupt_status);
+ while (alen--)
+ writel(addr >> (8*alen), &zynq_i2c->data);
+ /* Start the tranfer */
+ writel(dev, &zynq_i2c->address);
+ if (!zynq_i2c_wait(ZYNQ_I2C_INTERRUPT_COMP)) {
+ /* Release the bus */
+ clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD);
+ return -ETIMEDOUT;
+ }
+
+ debug("Device acked address\n");
+ while (length--) {
+ writel(*(cur_data++), &zynq_i2c->data);
+ if (readl(&zynq_i2c->transfer_size) == ZYNQ_I2C_FIFO_DEPTH) {
+ if (!zynq_i2c_wait(ZYNQ_I2C_INTERRUPT_COMP)) {
+ /* Release the bus */
+ clrbits_le32(&zynq_i2c->control,
+ ZYNQ_I2C_CONTROL_HOLD);
+ return -ETIMEDOUT;
+ }
+ }
+ }
+
+ /* All done... release the bus */
+ clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD);
+ /* Wait for the address and data to be sent */
+ if (!zynq_i2c_wait(ZYNQ_I2C_INTERRUPT_COMP))
+ return -ETIMEDOUT;
+ return 0;
+}
+
+int i2c_set_bus_num(unsigned int bus)
+{
+ /* Only support bus 0 */
+ if (bus > 0)
+ return -1;
+ return 0;
+}
+
+unsigned int i2c_get_bus_num(void)
+{
+ /* Only support bus 0 */
+ return 0;
+}
diff --git a/drivers/input/key_matrix.c b/drivers/input/key_matrix.c
index 946a186..c900e45 100644
--- a/drivers/input/key_matrix.c
+++ b/drivers/input/key_matrix.c
@@ -154,54 +154,42 @@
return map;
}
-int key_matrix_decode_fdt(struct key_matrix *config, const void *blob,
- int node)
+int key_matrix_decode_fdt(struct key_matrix *config, const void *blob, int node)
{
const struct fdt_property *prop;
- const char prefix[] = "linux,";
- int plen = sizeof(prefix) - 1;
- int offset;
+ int proplen;
+ uchar *plain_keycode;
- /* Check each property name for ones that we understand */
- for (offset = fdt_first_property_offset(blob, node);
- offset > 0;
- offset = fdt_next_property_offset(blob, offset)) {
- const char *name;
- int len;
-
- prop = fdt_get_property_by_offset(blob, offset, NULL);
- name = fdt_string(blob, fdt32_to_cpu(prop->nameoff));
- len = strlen(name);
-
- /* Name needs to match "1,<type>keymap" */
- debug("%s: property '%s'\n", __func__, name);
- if (strncmp(name, prefix, plen) ||
- len < plen + 6 ||
- strcmp(name + len - 6, "keymap"))
- continue;
-
- len -= plen + 6;
- if (len == 0) {
- config->plain_keycode = create_keymap(config,
- (u32 *)prop->data, fdt32_to_cpu(prop->len),
- KEY_FN, &config->fn_pos);
- } else if (0 == strncmp(name + plen, "fn-", len)) {
- config->fn_keycode = create_keymap(config,
- (u32 *)prop->data, fdt32_to_cpu(prop->len),
- -1, NULL);
- } else {
- debug("%s: unrecognised property '%s'\n", __func__,
- name);
- }
- }
- debug("%s: Decoded key maps %p, %p from fdt\n", __func__,
- config->plain_keycode, config->fn_keycode);
-
- if (!config->plain_keycode) {
+ prop = fdt_get_property(blob, node, "linux,keymap", &proplen);
+ /* Basic keymap is required */
+ if (!prop) {
debug("%s: cannot find keycode-plain map\n", __func__);
return -1;
}
+ plain_keycode = create_keymap(config, (u32 *)prop->data,
+ proplen, KEY_FN, &config->fn_pos);
+ config->plain_keycode = plain_keycode;
+ /* Conversion error -> fail */
+ if (!config->plain_keycode)
+ return -1;
+
+ prop = fdt_get_property(blob, node, "linux,fn-keymap", &proplen);
+ /* fn keymap is optional */
+ if (!prop)
+ goto done;
+
+ config->fn_keycode = create_keymap(config, (u32 *)prop->data,
+ proplen, -1, NULL);
+ /* Conversion error -> fail */
+ if (!config->fn_keycode) {
+ free(plain_keycode);
+ return -1;
+ }
+
+done:
+ debug("%s: Decoded key maps %p, %p from fdt\n", __func__,
+ config->plain_keycode, config->fn_keycode);
return 0;
}
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 8cdc3b6..5d869b4 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -28,8 +28,10 @@
COBJS-$(CONFIG_ALI152X) += ali512x.o
COBJS-$(CONFIG_DS4510) += ds4510.o
COBJS-$(CONFIG_CBMEM_CONSOLE) += cbmem_console.o
+COBJS-$(CONFIG_FSL_IIM) += fsl_iim.o
COBJS-$(CONFIG_GPIO_LED) += gpio_led.o
COBJS-$(CONFIG_FSL_MC9SDZ60) += mc9sdz60.o
+COBJS-$(CONFIG_MXC_OCOTP) += mxc_ocotp.o
COBJS-$(CONFIG_NS87308) += ns87308.o
COBJS-$(CONFIG_PDSP188x) += pdsp188x.o
COBJS-$(CONFIG_STATUS_LED) += status_led.o
diff --git a/drivers/misc/fsl_iim.c b/drivers/misc/fsl_iim.c
new file mode 100644
index 0000000..9179fbb
--- /dev/null
+++ b/drivers/misc/fsl_iim.c
@@ -0,0 +1,286 @@
+/*
+ * (C) Copyright 2009-2013 ADVANSEE
+ * Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
+ *
+ * Based on the mpc512x iim code:
+ * Copyright 2008 Silicon Turnkey Express, Inc.
+ * Martha Marx <mmarx@silicontkx.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <fuse.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#ifndef CONFIG_MPC512X
+#include <asm/arch/imx-regs.h>
+#endif
+
+/* FSL IIM-specific constants */
+#define STAT_BUSY 0x80
+#define STAT_PRGD 0x02
+#define STAT_SNSD 0x01
+
+#define STATM_PRGD_M 0x02
+#define STATM_SNSD_M 0x01
+
+#define ERR_PRGE 0x80
+#define ERR_WPE 0x40
+#define ERR_OPE 0x20
+#define ERR_RPE 0x10
+#define ERR_WLRE 0x08
+#define ERR_SNSE 0x04
+#define ERR_PARITYE 0x02
+
+#define EMASK_PRGE_M 0x80
+#define EMASK_WPE_M 0x40
+#define EMASK_OPE_M 0x20
+#define EMASK_RPE_M 0x10
+#define EMASK_WLRE_M 0x08
+#define EMASK_SNSE_M 0x04
+#define EMASK_PARITYE_M 0x02
+
+#define FCTL_DPC 0x80
+#define FCTL_PRG_LENGTH_MASK 0x70
+#define FCTL_ESNS_N 0x08
+#define FCTL_ESNS_0 0x04
+#define FCTL_ESNS_1 0x02
+#define FCTL_PRG 0x01
+
+#define UA_A_BANK_MASK 0x38
+#define UA_A_ROWH_MASK 0x07
+
+#define LA_A_ROWL_MASK 0xf8
+#define LA_A_BIT_MASK 0x07
+
+#define PREV_PROD_REV_MASK 0xf8
+#define PREV_PROD_VT_MASK 0x07
+
+/* Select the correct accessors depending on endianness */
+#if __BYTE_ORDER == __LITTLE_ENDIAN
+#define iim_read32 in_le32
+#define iim_write32 out_le32
+#define iim_clrsetbits32 clrsetbits_le32
+#define iim_clrbits32 clrbits_le32
+#define iim_setbits32 setbits_le32
+#elif __BYTE_ORDER == __BIG_ENDIAN
+#define iim_read32 in_be32
+#define iim_write32 out_be32
+#define iim_clrsetbits32 clrsetbits_be32
+#define iim_clrbits32 clrbits_be32
+#define iim_setbits32 setbits_be32
+#else
+#error Endianess is not defined: please fix to continue
+#endif
+
+/* IIM control registers */
+struct fsl_iim {
+ u32 stat;
+ u32 statm;
+ u32 err;
+ u32 emask;
+ u32 fctl;
+ u32 ua;
+ u32 la;
+ u32 sdat;
+ u32 prev;
+ u32 srev;
+ u32 prg_p;
+ u32 scs[0x1f5];
+ struct {
+ u32 word[0x100];
+ } bank[8];
+};
+
+static int prepare_access(struct fsl_iim **regs, u32 bank, u32 word, int assert,
+ const char *caller)
+{
+ *regs = (struct fsl_iim *)IIM_BASE_ADDR;
+
+ if (bank >= ARRAY_SIZE((*regs)->bank) ||
+ word >= ARRAY_SIZE((*regs)->bank[0].word) ||
+ !assert) {
+ printf("fsl_iim %s(): Invalid argument\n", caller);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void clear_status(struct fsl_iim *regs)
+{
+ iim_setbits32(®s->stat, 0);
+ iim_setbits32(®s->err, 0);
+}
+
+static void finish_access(struct fsl_iim *regs, u32 *stat, u32 *err)
+{
+ *stat = iim_read32(®s->stat);
+ *err = iim_read32(®s->err);
+ clear_status(regs);
+}
+
+static int prepare_read(struct fsl_iim **regs, u32 bank, u32 word, u32 *val,
+ const char *caller)
+{
+ int ret;
+
+ ret = prepare_access(regs, bank, word, val != NULL, caller);
+ if (ret)
+ return ret;
+
+ clear_status(*regs);
+
+ return 0;
+}
+
+int fuse_read(u32 bank, u32 word, u32 *val)
+{
+ struct fsl_iim *regs;
+ u32 stat, err;
+ int ret;
+
+ ret = prepare_read(®s, bank, word, val, __func__);
+ if (ret)
+ return ret;
+
+ *val = iim_read32(®s->bank[bank].word[word]);
+ finish_access(regs, &stat, &err);
+
+ if (err & ERR_RPE) {
+ puts("fsl_iim fuse_read(): Read protect error\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static void direct_access(struct fsl_iim *regs, u32 bank, u32 word, u32 bit,
+ u32 fctl, u32 *stat, u32 *err)
+{
+ iim_write32(®s->ua, bank << 3 | word >> 5);
+ iim_write32(®s->la, (word << 3 | bit) & 0xff);
+ if (fctl == FCTL_PRG)
+ iim_write32(®s->prg_p, 0xaa);
+ iim_setbits32(®s->fctl, fctl);
+ while (iim_read32(®s->stat) & STAT_BUSY)
+ udelay(20);
+ finish_access(regs, stat, err);
+}
+
+int fuse_sense(u32 bank, u32 word, u32 *val)
+{
+ struct fsl_iim *regs;
+ u32 stat, err;
+ int ret;
+
+ ret = prepare_read(®s, bank, word, val, __func__);
+ if (ret)
+ return ret;
+
+ direct_access(regs, bank, word, 0, FCTL_ESNS_N, &stat, &err);
+
+ if (err & ERR_SNSE) {
+ puts("fsl_iim fuse_sense(): Explicit sense cycle error\n");
+ return -EIO;
+ }
+
+ if (!(stat & STAT_SNSD)) {
+ puts("fsl_iim fuse_sense(): Explicit sense cycle did not complete\n");
+ return -EIO;
+ }
+
+ *val = iim_read32(®s->sdat);
+ return 0;
+}
+
+static int prog_bit(struct fsl_iim *regs, u32 bank, u32 word, u32 bit)
+{
+ u32 stat, err;
+
+ clear_status(regs);
+ direct_access(regs, bank, word, bit, FCTL_PRG, &stat, &err);
+ iim_write32(®s->prg_p, 0x00);
+
+ if (err & ERR_PRGE) {
+ puts("fsl_iim fuse_prog(): Program error\n");
+ return -EIO;
+ }
+
+ if (err & ERR_WPE) {
+ puts("fsl_iim fuse_prog(): Write protect error\n");
+ return -EIO;
+ }
+
+ if (!(stat & STAT_PRGD)) {
+ puts("fsl_iim fuse_prog(): Program did not complete\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int prepare_write(struct fsl_iim **regs, u32 bank, u32 word, u32 val,
+ const char *caller)
+{
+ return prepare_access(regs, bank, word, !(val & ~0xff), caller);
+}
+
+int fuse_prog(u32 bank, u32 word, u32 val)
+{
+ struct fsl_iim *regs;
+ u32 bit;
+ int ret;
+
+ ret = prepare_write(®s, bank, word, val, __func__);
+ if (ret)
+ return ret;
+
+ for (bit = 0; val; bit++, val >>= 1)
+ if (val & 0x01) {
+ ret = prog_bit(regs, bank, word, bit);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+int fuse_override(u32 bank, u32 word, u32 val)
+{
+ struct fsl_iim *regs;
+ u32 stat, err;
+ int ret;
+
+ ret = prepare_write(®s, bank, word, val, __func__);
+ if (ret)
+ return ret;
+
+ clear_status(regs);
+ iim_write32(®s->bank[bank].word[word], val);
+ finish_access(regs, &stat, &err);
+
+ if (err & ERR_OPE) {
+ puts("fsl_iim fuse_override(): Override protect error\n");
+ return -EIO;
+ }
+
+ return 0;
+}
diff --git a/drivers/misc/mxc_ocotp.c b/drivers/misc/mxc_ocotp.c
new file mode 100644
index 0000000..0095b47
--- /dev/null
+++ b/drivers/misc/mxc_ocotp.c
@@ -0,0 +1,216 @@
+/*
+ * (C) Copyright 2013 ADVANSEE
+ * Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
+ *
+ * Based on Dirk Behme's
+ * https://github.com/dirkbehme/u-boot-imx6/blob/28b17e9/drivers/misc/imx_otp.c,
+ * which is based on Freescale's
+ * http://git.freescale.com/git/cgit.cgi/imx/uboot-imx.git/tree/drivers/misc/imx_otp.c?h=imx_v2009.08_1.1.0&id=9aa74e6,
+ * which is:
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <fuse.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+
+#define BO_CTRL_WR_UNLOCK 16
+#define BM_CTRL_WR_UNLOCK 0xffff0000
+#define BV_CTRL_WR_UNLOCK_KEY 0x3e77
+#define BM_CTRL_ERROR 0x00000200
+#define BM_CTRL_BUSY 0x00000100
+#define BO_CTRL_ADDR 0
+#define BM_CTRL_ADDR 0x0000007f
+
+#define BO_TIMING_STROBE_READ 16
+#define BM_TIMING_STROBE_READ 0x003f0000
+#define BV_TIMING_STROBE_READ_NS 37
+#define BO_TIMING_RELAX 12
+#define BM_TIMING_RELAX 0x0000f000
+#define BV_TIMING_RELAX_NS 17
+#define BO_TIMING_STROBE_PROG 0
+#define BM_TIMING_STROBE_PROG 0x00000fff
+#define BV_TIMING_STROBE_PROG_US 10
+
+#define BM_READ_CTRL_READ_FUSE 0x00000001
+
+#define BF(value, field) (((value) << BO_##field) & BM_##field)
+
+#define WRITE_POSTAMBLE_US 2
+
+static void wait_busy(struct ocotp_regs *regs, unsigned int delay_us)
+{
+ while (readl(®s->ctrl) & BM_CTRL_BUSY)
+ udelay(delay_us);
+}
+
+static void clear_error(struct ocotp_regs *regs)
+{
+ writel(BM_CTRL_ERROR, ®s->ctrl_clr);
+}
+
+static int prepare_access(struct ocotp_regs **regs, u32 bank, u32 word,
+ int assert, const char *caller)
+{
+ *regs = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+
+ if (bank >= ARRAY_SIZE((*regs)->bank) ||
+ word >= ARRAY_SIZE((*regs)->bank[0].fuse_regs) >> 2 ||
+ !assert) {
+ printf("mxc_ocotp %s(): Invalid argument\n", caller);
+ return -EINVAL;
+ }
+
+ enable_ocotp_clk(1);
+
+ wait_busy(*regs, 1);
+ clear_error(*regs);
+
+ return 0;
+}
+
+static int finish_access(struct ocotp_regs *regs, const char *caller)
+{
+ u32 err;
+
+ err = !!(readl(®s->ctrl) & BM_CTRL_ERROR);
+ clear_error(regs);
+
+ enable_ocotp_clk(0);
+
+ if (err) {
+ printf("mxc_ocotp %s(): Access protect error\n", caller);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int prepare_read(struct ocotp_regs **regs, u32 bank, u32 word, u32 *val,
+ const char *caller)
+{
+ return prepare_access(regs, bank, word, val != NULL, caller);
+}
+
+int fuse_read(u32 bank, u32 word, u32 *val)
+{
+ struct ocotp_regs *regs;
+ int ret;
+
+ ret = prepare_read(®s, bank, word, val, __func__);
+ if (ret)
+ return ret;
+
+ *val = readl(®s->bank[bank].fuse_regs[word << 2]);
+
+ return finish_access(regs, __func__);
+}
+
+static void set_timing(struct ocotp_regs *regs)
+{
+ u32 ipg_clk;
+ u32 relax, strobe_read, strobe_prog;
+ u32 timing;
+
+ ipg_clk = mxc_get_clock(MXC_IPG_CLK);
+
+ relax = DIV_ROUND_UP(ipg_clk * BV_TIMING_RELAX_NS, 1000000000) - 1;
+ strobe_read = DIV_ROUND_UP(ipg_clk * BV_TIMING_STROBE_READ_NS,
+ 1000000000) + 2 * (relax + 1) - 1;
+ strobe_prog = DIV_ROUND(ipg_clk * BV_TIMING_STROBE_PROG_US, 1000000) +
+ 2 * (relax + 1) - 1;
+
+ timing = BF(strobe_read, TIMING_STROBE_READ) |
+ BF(relax, TIMING_RELAX) |
+ BF(strobe_prog, TIMING_STROBE_PROG);
+
+ clrsetbits_le32(®s->timing, BM_TIMING_STROBE_READ | BM_TIMING_RELAX |
+ BM_TIMING_STROBE_PROG, timing);
+}
+
+static void setup_direct_access(struct ocotp_regs *regs, u32 bank, u32 word,
+ int write)
+{
+ u32 wr_unlock = write ? BV_CTRL_WR_UNLOCK_KEY : 0;
+ u32 addr = bank << 3 | word;
+
+ set_timing(regs);
+ clrsetbits_le32(®s->ctrl, BM_CTRL_WR_UNLOCK | BM_CTRL_ADDR,
+ BF(wr_unlock, CTRL_WR_UNLOCK) |
+ BF(addr, CTRL_ADDR));
+}
+
+int fuse_sense(u32 bank, u32 word, u32 *val)
+{
+ struct ocotp_regs *regs;
+ int ret;
+
+ ret = prepare_read(®s, bank, word, val, __func__);
+ if (ret)
+ return ret;
+
+ setup_direct_access(regs, bank, word, false);
+ writel(BM_READ_CTRL_READ_FUSE, ®s->read_ctrl);
+ wait_busy(regs, 1);
+ *val = readl(®s->read_fuse_data);
+
+ return finish_access(regs, __func__);
+}
+
+static int prepare_write(struct ocotp_regs **regs, u32 bank, u32 word,
+ const char *caller)
+{
+ return prepare_access(regs, bank, word, true, caller);
+}
+
+int fuse_prog(u32 bank, u32 word, u32 val)
+{
+ struct ocotp_regs *regs;
+ int ret;
+
+ ret = prepare_write(®s, bank, word, __func__);
+ if (ret)
+ return ret;
+
+ setup_direct_access(regs, bank, word, true);
+ writel(val, ®s->data);
+ wait_busy(regs, BV_TIMING_STROBE_PROG_US);
+ udelay(WRITE_POSTAMBLE_US);
+
+ return finish_access(regs, __func__);
+}
+
+int fuse_override(u32 bank, u32 word, u32 val)
+{
+ struct ocotp_regs *regs;
+ int ret;
+
+ ret = prepare_write(®s, bank, word, __func__);
+ if (ret)
+ return ret;
+
+ writel(val, ®s->bank[bank].fuse_regs[word << 2]);
+
+ return finish_access(regs, __func__);
+}
diff --git a/drivers/misc/twl4030_led.c b/drivers/misc/twl4030_led.c
index 33cea11..e150d8f 100644
--- a/drivers/misc/twl4030_led.c
+++ b/drivers/misc/twl4030_led.c
@@ -42,7 +42,7 @@
if (ledon_mask & TWL4030_LED_LEDEN_LEDBON)
ledon_mask |= TWL4030_LED_LEDEN_LEDBPWM;
- twl4030_i2c_write_u8(TWL4030_CHIP_LED, ledon_mask,
- TWL4030_LED_LEDEN);
+ twl4030_i2c_write_u8(TWL4030_CHIP_LED, TWL4030_LED_LEDEN,
+ ledon_mask);
}
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 2b58178..24648a2 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -47,6 +47,7 @@
COBJS-$(CONFIG_TEGRA_MMC) += tegra_mmc.o
COBJS-$(CONFIG_DWMMC) += dw_mmc.o
COBJS-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o
+COBJS-$(CONFIG_ZYNQ_SDHCI) += zynq_sdhci.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/mmc/gen_atmel_mci.c b/drivers/mmc/gen_atmel_mci.c
index 70a9f91..77ebf17 100644
--- a/drivers/mmc/gen_atmel_mci.c
+++ b/drivers/mmc/gen_atmel_mci.c
@@ -50,6 +50,12 @@
static int initialized = 0;
+/* Read Atmel MCI IP version */
+static unsigned int atmel_mci_get_version(struct atmel_mci *mci)
+{
+ return readl(&mci->version) & 0x00000fff;
+}
+
/*
* Print command and status:
*
@@ -205,7 +211,10 @@
/* Wait for the command to complete */
while (!((status = readl(&mci->sr)) & MMCI_BIT(CMDRDY)));
- if (status & error_flags) {
+ if ((status & error_flags) & MMCI_BIT(RTOE)) {
+ dump_cmd(cmdr, cmd->cmdarg, status, "Command Time Out");
+ return TIMEOUT;
+ } else if (status & error_flags) {
dump_cmd(cmdr, cmd->cmdarg, status, "Command Failed");
return COMM_ERR;
}
@@ -297,7 +306,9 @@
static void mci_set_ios(struct mmc *mmc)
{
atmel_mci_t *mci = (atmel_mci_t *)mmc->priv;
- int busw = (mmc->bus_width == 4) ? 1 : 0;
+ int bus_width = mmc->bus_width;
+ unsigned int version = atmel_mci_get_version(mci);
+ int busw;
/* Set the clock speed */
mci_set_mode(mmc, mmc->clock, MMC_DEFAULT_BLKLEN);
@@ -305,9 +316,26 @@
/*
* set the bus width and select slot for this interface
* there is no capability for multiple slots on the same interface yet
- * Bitfield SCDBUS needs to be expanded to 2 bits for 8-bit buses
*/
- writel(MMCI_BF(SCDBUS, busw) | MMCI_BF(SCDSEL, MCI_BUS), &mci->sdcr);
+ if ((version & 0xf00) >= 0x300) {
+ switch (bus_width) {
+ case 8:
+ busw = 3;
+ break;
+ case 4:
+ busw = 2;
+ break;
+ default:
+ busw = 0;
+ break;
+ }
+
+ writel(busw << 6 | MMCI_BF(SCDSEL, MCI_BUS), &mci->sdcr);
+ } else {
+ busw = (bus_width == 4) ? 1 : 0;
+
+ writel(busw << 7 | MMCI_BF(SCDSEL, MCI_BUS), &mci->sdcr);
+ }
}
/* Entered into mmc structure during driver init */
@@ -340,9 +368,12 @@
int atmel_mci_init(void *regs)
{
struct mmc *mmc = malloc(sizeof(struct mmc));
+ struct atmel_mci *mci;
+ unsigned int version;
if (!mmc)
return -1;
+
strcpy(mmc->name, "mci");
mmc->priv = regs;
mmc->send_cmd = mci_send_cmd;
@@ -353,7 +384,13 @@
/* need to be able to pass these in on a board by board basis */
mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
- mmc->host_caps = MMC_MODE_4BIT;
+ mci = (struct atmel_mci *)mmc->priv;
+ version = atmel_mci_get_version(mci);
+ if ((version & 0xf00) >= 0x300)
+ mmc->host_caps = MMC_MODE_8BIT;
+
+ mmc->host_caps |= MMC_MODE_4BIT;
+
/*
* min and max frequencies determined by
* max and min of clock divider
diff --git a/drivers/mmc/mxsmmc.c b/drivers/mmc/mxsmmc.c
index a89660f..fdaf9c7 100644
--- a/drivers/mmc/mxsmmc.c
+++ b/drivers/mmc/mxsmmc.c
@@ -41,7 +41,7 @@
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
-#include <asm/arch/dma.h>
+#include <asm/imx-common/dma.h>
#include <bouncebuf.h>
struct mxsmmc_priv {
diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c
index 166744c..975b2c5 100644
--- a/drivers/mmc/omap_hsmmc.c
+++ b/drivers/mmc/omap_hsmmc.c
@@ -29,7 +29,7 @@
#include <i2c.h>
#include <twl4030.h>
#include <twl6030.h>
-#include <twl6035.h>
+#include <palmas.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch/mmc_host_def.h>
@@ -107,29 +107,27 @@
}
#endif
-#if defined(CONFIG_OMAP54XX) && defined(CONFIG_TWL6035_POWER)
+#if defined(CONFIG_OMAP54XX) && defined(CONFIG_PALMAS_POWER)
static void omap5_pbias_config(struct mmc *mmc)
{
u32 value = 0;
value = readl((*ctrl)->control_pbias);
- value &= ~(SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ);
- value |= SDCARD_BIAS_HIZ_MODE;
+ value &= ~SDCARD_PWRDNZ;
+ writel(value, (*ctrl)->control_pbias);
+ udelay(10); /* wait 10 us */
+ value &= ~SDCARD_BIAS_PWRDNZ;
writel(value, (*ctrl)->control_pbias);
- twl6035_mmc1_poweron_ldo();
+ palmas_mmc1_poweron_ldo();
value = readl((*ctrl)->control_pbias);
- value &= ~SDCARD_BIAS_HIZ_MODE;
- value |= SDCARD_PBIASLITE_VMODE | SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ;
+ value |= SDCARD_BIAS_PWRDNZ;
writel(value, (*ctrl)->control_pbias);
-
- value = readl((*ctrl)->control_pbias);
- if (value & (1 << 23)) {
- value &= ~(SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ);
- value |= SDCARD_BIAS_HIZ_MODE;
- writel(value, (*ctrl)->control_pbias);
- }
+ udelay(150); /* wait 150 us */
+ value |= SDCARD_PWRDNZ;
+ writel(value, (*ctrl)->control_pbias);
+ udelay(150); /* wait 150 us */
}
#endif
@@ -178,7 +176,7 @@
if (mmc->block_dev.dev == 0)
omap4_vmmc_pbias_config(mmc);
#endif
-#if defined(CONFIG_OMAP54XX) && defined(CONFIG_TWL6035_POWER)
+#if defined(CONFIG_OMAP54XX) && defined(CONFIG_PALMAS_POWER)
if (mmc->block_dev.dev == 0)
omap5_pbias_config(mmc);
#endif
diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c
new file mode 100644
index 0000000..9e37af4
--- /dev/null
+++ b/drivers/mmc/zynq_sdhci.c
@@ -0,0 +1,40 @@
+/*
+ * (C) Copyright 2013 Inc.
+ *
+ * Xilinx Zynq SD Host Controller Interface
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <sdhci.h>
+#include <asm/arch/sys_proto.h>
+
+int zynq_sdhci_init(u32 regbase)
+{
+ struct sdhci_host *host = NULL;
+
+ host = (struct sdhci_host *)malloc(sizeof(struct sdhci_host));
+ if (!host) {
+ printf("zynq_sdhci_init: sdhci_host malloc fail\n");
+ return 1;
+ }
+
+ host->name = "zynq_sdhci";
+ host->ioaddr = (void *)regbase;
+ host->quirks = SDHCI_QUIRK_NO_CD | SDHCI_QUIRK_WAIT_SEND_CMD;
+ host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
+
+ host->host_caps = MMC_MODE_HC;
+
+ add_sdhci(host, 52000000, 52000000 >> 9);
+ return 0;
+}
diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
index 543c845..99f39fc 100644
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -25,7 +25,9 @@
LIB := $(obj)libmtd.o
-COBJS-$(CONFIG_MTD_DEVICE) += mtdcore.o
+ifneq (,$(findstring y,$(CONFIG_MTD_DEVICE)$(CONFIG_CMD_NAND)$(CONFIG_CMD_ONENAND)))
+COBJS-y += mtdcore.o
+endif
COBJS-$(CONFIG_MTD_PARTITIONS) += mtdpart.o
COBJS-$(CONFIG_MTD_CONCAT) += mtdconcat.o
COBJS-$(CONFIG_HAS_DATAFLASH) += at45.o
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index 22d8440..25f8752 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -38,6 +38,7 @@
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/byteorder.h>
+#include <asm/unaligned.h>
#include <environment.h>
#include <mtd/cfi_flash.h>
#include <watchdog.h>
@@ -183,16 +184,16 @@
flash_info_t *flash_get_info(ulong base)
{
int i;
- flash_info_t *info = NULL;
+ flash_info_t *info;
for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- info = & flash_info[i];
+ info = &flash_info[i];
if (info->size && info->start[0] <= base &&
base <= info->start[0] + info->size - 1)
- break;
+ return info;
}
- return info;
+ return NULL;
}
#endif
@@ -1640,9 +1641,10 @@
u32 tmp;
for (i = 0, j = qry->num_erase_regions - 1; i < j; i++, j--) {
- tmp = qry->erase_region_info[i];
- qry->erase_region_info[i] = qry->erase_region_info[j];
- qry->erase_region_info[j] = tmp;
+ tmp = get_unaligned(&(qry->erase_region_info[i]));
+ put_unaligned(get_unaligned(&(qry->erase_region_info[j])),
+ &(qry->erase_region_info[i]));
+ put_unaligned(tmp, &(qry->erase_region_info[j]));
}
}
@@ -2073,8 +2075,8 @@
info->start[0] = (ulong)map_physmem(base, info->portwidth, MAP_NOCACHE);
if (flash_detect_cfi (info, &qry)) {
- info->vendor = le16_to_cpu(qry.p_id);
- info->ext_addr = le16_to_cpu(qry.p_adr);
+ info->vendor = le16_to_cpu(get_unaligned(&(qry.p_id)));
+ info->ext_addr = le16_to_cpu(get_unaligned(&(qry.p_adr)));
num_erase_regions = qry.num_erase_regions;
if (info->ext_addr) {
@@ -2163,7 +2165,8 @@
break;
}
- tmp = le32_to_cpu(qry.erase_region_info[i]);
+ tmp = le32_to_cpu(get_unaligned(
+ &(qry.erase_region_info[i])));
debug("erase region %u: 0x%08lx\n", i, tmp);
erase_region_count = (tmp & 0xffff) + 1;
diff --git a/drivers/mtd/cfi_mtd.c b/drivers/mtd/cfi_mtd.c
index 8d74fa9..bbb71a1 100644
--- a/drivers/mtd/cfi_mtd.c
+++ b/drivers/mtd/cfi_mtd.c
@@ -244,12 +244,12 @@
mtd->size = fi->size;
mtd->writesize = 1;
- mtd->erase = cfi_mtd_erase;
- mtd->read = cfi_mtd_read;
- mtd->write = cfi_mtd_write;
- mtd->sync = cfi_mtd_sync;
- mtd->lock = cfi_mtd_lock;
- mtd->unlock = cfi_mtd_unlock;
+ mtd->_erase = cfi_mtd_erase;
+ mtd->_read = cfi_mtd_read;
+ mtd->_write = cfi_mtd_write;
+ mtd->_sync = cfi_mtd_sync;
+ mtd->_lock = cfi_mtd_lock;
+ mtd->_unlock = cfi_mtd_unlock;
mtd->priv = fi;
if (add_mtd_device(mtd))
diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c
index e6d9384..31e4289 100644
--- a/drivers/mtd/mtdconcat.c
+++ b/drivers/mtd/mtdconcat.c
@@ -70,14 +70,14 @@
/* Entire transaction goes into this subdev */
size = len;
- err = subdev->read(subdev, from, size, &retsize, buf);
+ err = mtd_read(subdev, from, size, &retsize, buf);
/* Save information about bitflips! */
if (unlikely(err)) {
- if (err == -EBADMSG) {
+ if (mtd_is_eccerr(err)) {
mtd->ecc_stats.failed++;
ret = err;
- } else if (err == -EUCLEAN) {
+ } else if (mtd_is_bitflip(err)) {
mtd->ecc_stats.corrected++;
/* Do not overwrite -EBADMSG !! */
if (!ret)
@@ -105,9 +105,6 @@
int err = -EINVAL;
int i;
- if (!(mtd->flags & MTD_WRITEABLE))
- return -EROFS;
-
*retlen = 0;
for (i = 0; i < concat->num_subdev; i++) {
@@ -124,11 +121,7 @@
else
size = len;
- if (!(subdev->flags & MTD_WRITEABLE))
- err = -EROFS;
- else
- err = subdev->write(subdev, to, size, &retsize, buf);
-
+ err = mtd_write(subdev, to, size, &retsize, buf);
if (err)
break;
@@ -165,16 +158,16 @@
if (from + devops.len > subdev->size)
devops.len = subdev->size - from;
- err = subdev->read_oob(subdev, from, &devops);
+ err = mtd_read_oob(subdev, from, &devops);
ops->retlen += devops.retlen;
ops->oobretlen += devops.oobretlen;
/* Save information about bitflips! */
if (unlikely(err)) {
- if (err == -EBADMSG) {
+ if (mtd_is_eccerr(err)) {
mtd->ecc_stats.failed++;
ret = err;
- } else if (err == -EUCLEAN) {
+ } else if (mtd_is_bitflip(err)) {
mtd->ecc_stats.corrected++;
/* Do not overwrite -EBADMSG !! */
if (!ret)
@@ -225,7 +218,7 @@
if (to + devops.len > subdev->size)
devops.len = subdev->size - to;
- err = subdev->write_oob(subdev, to, &devops);
+ err = mtd_write_oob(subdev, to, &devops);
ops->retlen += devops.retlen;
if (err)
return err;
@@ -271,7 +264,7 @@
* FIXME: Allow INTERRUPTIBLE. Which means
* not having the wait_queue head on the stack.
*/
- err = mtd->erase(mtd, erase);
+ err = mtd_erase(mtd, erase);
if (!err) {
set_current_state(TASK_UNINTERRUPTIBLE);
add_wait_queue(&waitq, &wait);
@@ -294,15 +287,6 @@
uint64_t length, offset = 0;
struct erase_info *erase;
- if (!(mtd->flags & MTD_WRITEABLE))
- return -EROFS;
-
- if (instr->addr > concat->mtd.size)
- return -EINVAL;
-
- if (instr->len + instr->addr > concat->mtd.size)
- return -EINVAL;
-
/*
* Check for proper erase block alignment of the to-be-erased area.
* It is easier to do this based on the super device's erase
@@ -350,8 +334,6 @@
return -EINVAL;
}
- instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
-
/* make a local copy of instr to avoid modifying the caller's struct */
erase = kmalloc(sizeof (struct erase_info), GFP_KERNEL);
@@ -390,10 +372,6 @@
else
erase->len = length;
- if (!(subdev->flags & MTD_WRITEABLE)) {
- err = -EROFS;
- break;
- }
length -= erase->len;
if ((err = concat_dev_erase(subdev, erase))) {
/* sanity check: should never happen since
@@ -429,9 +407,6 @@
struct mtd_concat *concat = CONCAT(mtd);
int i, err = -EINVAL;
- if ((len + ofs) > mtd->size)
- return -EINVAL;
-
for (i = 0; i < concat->num_subdev; i++) {
struct mtd_info *subdev = concat->subdev[i];
uint64_t size;
@@ -446,7 +421,7 @@
else
size = len;
- err = subdev->lock(subdev, ofs, size);
+ err = mtd_lock(subdev, ofs, size);
if (err)
break;
@@ -467,9 +442,6 @@
struct mtd_concat *concat = CONCAT(mtd);
int i, err = 0;
- if ((len + ofs) > mtd->size)
- return -EINVAL;
-
for (i = 0; i < concat->num_subdev; i++) {
struct mtd_info *subdev = concat->subdev[i];
uint64_t size;
@@ -484,7 +456,7 @@
else
size = len;
- err = subdev->unlock(subdev, ofs, size);
+ err = mtd_unlock(subdev, ofs, size);
if (err)
break;
@@ -507,7 +479,7 @@
for (i = 0; i < concat->num_subdev; i++) {
struct mtd_info *subdev = concat->subdev[i];
- subdev->sync(subdev);
+ mtd_sync(subdev);
}
}
@@ -516,12 +488,9 @@
struct mtd_concat *concat = CONCAT(mtd);
int i, res = 0;
- if (!concat->subdev[0]->block_isbad)
+ if (!mtd_can_have_bb(concat->subdev[0]))
return res;
- if (ofs > mtd->size)
- return -EINVAL;
-
for (i = 0; i < concat->num_subdev; i++) {
struct mtd_info *subdev = concat->subdev[i];
@@ -530,7 +499,7 @@
continue;
}
- res = subdev->block_isbad(subdev, ofs);
+ res = mtd_block_isbad(subdev, ofs);
break;
}
@@ -542,12 +511,9 @@
struct mtd_concat *concat = CONCAT(mtd);
int i, err = -EINVAL;
- if (!concat->subdev[0]->block_markbad)
+ if (!mtd_can_have_bb(concat->subdev[0]))
return 0;
- if (ofs > mtd->size)
- return -EINVAL;
-
for (i = 0; i < concat->num_subdev; i++) {
struct mtd_info *subdev = concat->subdev[i];
@@ -556,7 +522,7 @@
continue;
}
- err = subdev->block_markbad(subdev, ofs);
+ err = mtd_block_markbad(subdev, ofs);
if (!err)
mtd->ecc_stats.badblocks++;
break;
@@ -609,14 +575,14 @@
concat->mtd.subpage_sft = subdev[0]->subpage_sft;
concat->mtd.oobsize = subdev[0]->oobsize;
concat->mtd.oobavail = subdev[0]->oobavail;
- if (subdev[0]->read_oob)
- concat->mtd.read_oob = concat_read_oob;
- if (subdev[0]->write_oob)
- concat->mtd.write_oob = concat_write_oob;
- if (subdev[0]->block_isbad)
- concat->mtd.block_isbad = concat_block_isbad;
- if (subdev[0]->block_markbad)
- concat->mtd.block_markbad = concat_block_markbad;
+ if (subdev[0]->_read_oob)
+ concat->mtd._read_oob = concat_read_oob;
+ if (subdev[0]->_write_oob)
+ concat->mtd._write_oob = concat_write_oob;
+ if (subdev[0]->_block_isbad)
+ concat->mtd._block_isbad = concat_block_isbad;
+ if (subdev[0]->_block_markbad)
+ concat->mtd._block_markbad = concat_block_markbad;
concat->mtd.ecc_stats.badblocks = subdev[0]->ecc_stats.badblocks;
@@ -653,8 +619,8 @@
if (concat->mtd.writesize != subdev[i]->writesize ||
concat->mtd.subpage_sft != subdev[i]->subpage_sft ||
concat->mtd.oobsize != subdev[i]->oobsize ||
- !concat->mtd.read_oob != !subdev[i]->read_oob ||
- !concat->mtd.write_oob != !subdev[i]->write_oob) {
+ !concat->mtd._read_oob != !subdev[i]->_read_oob ||
+ !concat->mtd._write_oob != !subdev[i]->_write_oob) {
kfree(concat);
printk("Incompatible OOB or ECC data on \"%s\"\n",
subdev[i]->name);
@@ -669,12 +635,12 @@
concat->num_subdev = num_devs;
concat->mtd.name = name;
- concat->mtd.erase = concat_erase;
- concat->mtd.read = concat_read;
- concat->mtd.write = concat_write;
- concat->mtd.sync = concat_sync;
- concat->mtd.lock = concat_lock;
- concat->mtd.unlock = concat_unlock;
+ concat->mtd._erase = concat_erase;
+ concat->mtd._read = concat_read;
+ concat->mtd._write = concat_write;
+ concat->mtd._sync = concat_sync;
+ concat->mtd._lock = concat_lock;
+ concat->mtd._unlock = concat_unlock;
/*
* Combine the erase block size info of the subdevices:
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 3a81ada..49c0814 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -25,6 +25,11 @@
mtd->index = i;
mtd->usecount = 0;
+ /* default value if not set by driver */
+ if (mtd->bitflip_threshold == 0)
+ mtd->bitflip_threshold = mtd->ecc_strength;
+
+
/* No need to get a refcount on the module containing
the notifier, since we hold the mtd_table_mutex */
@@ -186,3 +191,189 @@
}
}
#endif /* defined(CONFIG_CMD_MTDPARTS_SPREAD) */
+
+ /*
+ * Erase is an asynchronous operation. Device drivers are supposed
+ * to call instr->callback() whenever the operation completes, even
+ * if it completes with a failure.
+ * Callers are supposed to pass a callback function and wait for it
+ * to be called before writing to the block.
+ */
+int mtd_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+ if (instr->addr > mtd->size || instr->len > mtd->size - instr->addr)
+ return -EINVAL;
+ if (!(mtd->flags & MTD_WRITEABLE))
+ return -EROFS;
+ instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
+ if (!instr->len) {
+ instr->state = MTD_ERASE_DONE;
+ mtd_erase_callback(instr);
+ return 0;
+ }
+ return mtd->_erase(mtd, instr);
+}
+
+int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
+ u_char *buf)
+{
+ if (from < 0 || from > mtd->size || len > mtd->size - from)
+ return -EINVAL;
+ if (!len)
+ return 0;
+ return mtd->_read(mtd, from, len, retlen, buf);
+}
+
+int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
+ const u_char *buf)
+{
+ *retlen = 0;
+ if (to < 0 || to > mtd->size || len > mtd->size - to)
+ return -EINVAL;
+ if (!mtd->_write || !(mtd->flags & MTD_WRITEABLE))
+ return -EROFS;
+ if (!len)
+ return 0;
+ return mtd->_write(mtd, to, len, retlen, buf);
+}
+
+/*
+ * In blackbox flight recorder like scenarios we want to make successful writes
+ * in interrupt context. panic_write() is only intended to be called when its
+ * known the kernel is about to panic and we need the write to succeed. Since
+ * the kernel is not going to be running for much longer, this function can
+ * break locks and delay to ensure the write succeeds (but not sleep).
+ */
+int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
+ const u_char *buf)
+{
+ *retlen = 0;
+ if (!mtd->_panic_write)
+ return -EOPNOTSUPP;
+ if (to < 0 || to > mtd->size || len > mtd->size - to)
+ return -EINVAL;
+ if (!(mtd->flags & MTD_WRITEABLE))
+ return -EROFS;
+ if (!len)
+ return 0;
+ return mtd->_panic_write(mtd, to, len, retlen, buf);
+}
+
+int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops)
+{
+ ops->retlen = ops->oobretlen = 0;
+ if (!mtd->_read_oob)
+ return -EOPNOTSUPP;
+ return mtd->_read_oob(mtd, from, ops);
+}
+
+/*
+ * Method to access the protection register area, present in some flash
+ * devices. The user data is one time programmable but the factory data is read
+ * only.
+ */
+int mtd_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf,
+ size_t len)
+{
+ if (!mtd->_get_fact_prot_info)
+ return -EOPNOTSUPP;
+ if (!len)
+ return 0;
+ return mtd->_get_fact_prot_info(mtd, buf, len);
+}
+
+int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ *retlen = 0;
+ if (!mtd->_read_fact_prot_reg)
+ return -EOPNOTSUPP;
+ if (!len)
+ return 0;
+ return mtd->_read_fact_prot_reg(mtd, from, len, retlen, buf);
+}
+
+int mtd_get_user_prot_info(struct mtd_info *mtd, struct otp_info *buf,
+ size_t len)
+{
+ if (!mtd->_get_user_prot_info)
+ return -EOPNOTSUPP;
+ if (!len)
+ return 0;
+ return mtd->_get_user_prot_info(mtd, buf, len);
+}
+
+int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ *retlen = 0;
+ if (!mtd->_read_user_prot_reg)
+ return -EOPNOTSUPP;
+ if (!len)
+ return 0;
+ return mtd->_read_user_prot_reg(mtd, from, len, retlen, buf);
+}
+
+int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ *retlen = 0;
+ if (!mtd->_write_user_prot_reg)
+ return -EOPNOTSUPP;
+ if (!len)
+ return 0;
+ return mtd->_write_user_prot_reg(mtd, to, len, retlen, buf);
+}
+
+int mtd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len)
+{
+ if (!mtd->_lock_user_prot_reg)
+ return -EOPNOTSUPP;
+ if (!len)
+ return 0;
+ return mtd->_lock_user_prot_reg(mtd, from, len);
+}
+
+/* Chip-supported device locking */
+int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+ if (!mtd->_lock)
+ return -EOPNOTSUPP;
+ if (ofs < 0 || ofs > mtd->size || len > mtd->size - ofs)
+ return -EINVAL;
+ if (!len)
+ return 0;
+ return mtd->_lock(mtd, ofs, len);
+}
+
+int mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+ if (!mtd->_unlock)
+ return -EOPNOTSUPP;
+ if (ofs < 0 || ofs > mtd->size || len > mtd->size - ofs)
+ return -EINVAL;
+ if (!len)
+ return 0;
+ return mtd->_unlock(mtd, ofs, len);
+}
+
+int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs)
+{
+ if (!mtd->_block_isbad)
+ return 0;
+ if (ofs < 0 || ofs > mtd->size)
+ return -EINVAL;
+ return mtd->_block_isbad(mtd, ofs);
+}
+
+int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+ if (!mtd->_block_markbad)
+ return -EOPNOTSUPP;
+ if (ofs < 0 || ofs > mtd->size)
+ return -EINVAL;
+ if (!(mtd->flags & MTD_WRITEABLE))
+ return -EROFS;
+ return mtd->_block_markbad(mtd, ofs);
+}
+
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index cbfc679..9dfe7bb 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -52,17 +52,11 @@
int res;
stats = part->master->ecc_stats;
-
- if (from >= mtd->size)
- len = 0;
- else if (from + len > mtd->size)
- len = mtd->size - from;
- res = part->master->read(part->master, from + part->offset,
- len, retlen, buf);
+ res = mtd_read(part->master, from + part->offset, len, retlen, buf);
if (unlikely(res)) {
- if (res == -EUCLEAN)
+ if (mtd_is_bitflip(res))
mtd->ecc_stats.corrected += part->master->ecc_stats.corrected - stats.corrected;
- if (res == -EBADMSG)
+ if (mtd_is_eccerr(res))
mtd->ecc_stats.failed += part->master->ecc_stats.failed - stats.failed;
}
return res;
@@ -78,12 +72,12 @@
return -EINVAL;
if (ops->datbuf && from + ops->len > mtd->size)
return -EINVAL;
- res = part->master->read_oob(part->master, from + part->offset, ops);
+ res = mtd_read_oob(part->master, from + part->offset, ops);
if (unlikely(res)) {
- if (res == -EUCLEAN)
+ if (mtd_is_bitflip(res))
mtd->ecc_stats.corrected++;
- if (res == -EBADMSG)
+ if (mtd_is_eccerr(res))
mtd->ecc_stats.failed++;
}
return res;
@@ -93,58 +87,35 @@
size_t len, size_t *retlen, u_char *buf)
{
struct mtd_part *part = PART(mtd);
- return part->master->read_user_prot_reg(part->master, from,
- len, retlen, buf);
+ return mtd_read_user_prot_reg(part->master, from, len, retlen, buf);
}
static int part_get_user_prot_info(struct mtd_info *mtd,
struct otp_info *buf, size_t len)
{
struct mtd_part *part = PART(mtd);
- return part->master->get_user_prot_info(part->master, buf, len);
+ return mtd_get_user_prot_info(part->master, buf, len);
}
static int part_read_fact_prot_reg(struct mtd_info *mtd, loff_t from,
size_t len, size_t *retlen, u_char *buf)
{
struct mtd_part *part = PART(mtd);
- return part->master->read_fact_prot_reg(part->master, from,
- len, retlen, buf);
+ return mtd_read_fact_prot_reg(part->master, from, len, retlen, buf);
}
static int part_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf,
size_t len)
{
struct mtd_part *part = PART(mtd);
- return part->master->get_fact_prot_info(part->master, buf, len);
+ return mtd_get_fact_prot_info(part->master, buf, len);
}
static int part_write(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const u_char *buf)
{
struct mtd_part *part = PART(mtd);
- if (!(mtd->flags & MTD_WRITEABLE))
- return -EROFS;
- if (to >= mtd->size)
- len = 0;
- else if (to + len > mtd->size)
- len = mtd->size - to;
- return part->master->write(part->master, to + part->offset,
- len, retlen, buf);
-}
-
-static int part_panic_write(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
-{
- struct mtd_part *part = PART(mtd);
- if (!(mtd->flags & MTD_WRITEABLE))
- return -EROFS;
- if (to >= mtd->size)
- len = 0;
- else if (to + len > mtd->size)
- len = mtd->size - to;
- return part->master->panic_write(part->master, to + part->offset,
- len, retlen, buf);
+ return mtd_write(part->master, to + part->offset, len, retlen, buf);
}
static int part_write_oob(struct mtd_info *mtd, loff_t to,
@@ -152,41 +123,34 @@
{
struct mtd_part *part = PART(mtd);
- if (!(mtd->flags & MTD_WRITEABLE))
- return -EROFS;
-
if (to >= mtd->size)
return -EINVAL;
if (ops->datbuf && to + ops->len > mtd->size)
return -EINVAL;
- return part->master->write_oob(part->master, to + part->offset, ops);
+ return mtd_write_oob(part->master, to + part->offset, ops);
}
static int part_write_user_prot_reg(struct mtd_info *mtd, loff_t from,
size_t len, size_t *retlen, u_char *buf)
{
struct mtd_part *part = PART(mtd);
- return part->master->write_user_prot_reg(part->master, from,
- len, retlen, buf);
+ return mtd_write_user_prot_reg(part->master, from, len, retlen, buf);
}
static int part_lock_user_prot_reg(struct mtd_info *mtd, loff_t from,
size_t len)
{
struct mtd_part *part = PART(mtd);
- return part->master->lock_user_prot_reg(part->master, from, len);
+ return mtd_lock_user_prot_reg(part->master, from, len);
}
static int part_erase(struct mtd_info *mtd, struct erase_info *instr)
{
struct mtd_part *part = PART(mtd);
int ret;
- if (!(mtd->flags & MTD_WRITEABLE))
- return -EROFS;
- if (instr->addr >= mtd->size)
- return -EINVAL;
+
instr->addr += part->offset;
- ret = part->master->erase(part->master, instr);
+ ret = mtd_erase(part->master, instr);
if (ret) {
if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
instr->fail_addr -= part->offset;
@@ -197,7 +161,7 @@
void mtd_erase_callback(struct erase_info *instr)
{
- if (instr->mtd->erase == part_erase) {
+ if (instr->mtd->_erase == part_erase) {
struct mtd_part *part = PART(instr->mtd);
if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
@@ -211,32 +175,26 @@
static int part_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
{
struct mtd_part *part = PART(mtd);
- if ((len + ofs) > mtd->size)
- return -EINVAL;
- return part->master->lock(part->master, ofs + part->offset, len);
+ return mtd_lock(part->master, ofs + part->offset, len);
}
static int part_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
{
struct mtd_part *part = PART(mtd);
- if ((len + ofs) > mtd->size)
- return -EINVAL;
- return part->master->unlock(part->master, ofs + part->offset, len);
+ return mtd_unlock(part->master, ofs + part->offset, len);
}
static void part_sync(struct mtd_info *mtd)
{
struct mtd_part *part = PART(mtd);
- part->master->sync(part->master);
+ mtd_sync(part->master);
}
static int part_block_isbad(struct mtd_info *mtd, loff_t ofs)
{
struct mtd_part *part = PART(mtd);
- if (ofs >= mtd->size)
- return -EINVAL;
ofs += part->offset;
- return part->master->block_isbad(part->master, ofs);
+ return mtd_block_isbad(part->master, ofs);
}
static int part_block_markbad(struct mtd_info *mtd, loff_t ofs)
@@ -244,12 +202,8 @@
struct mtd_part *part = PART(mtd);
int res;
- if (!(mtd->flags & MTD_WRITEABLE))
- return -EROFS;
- if (ofs >= mtd->size)
- return -EINVAL;
ofs += part->offset;
- res = part->master->block_markbad(part->master, ofs);
+ res = mtd_block_markbad(part->master, ofs);
if (!res)
mtd->ecc_stats.badblocks++;
return res;
@@ -303,39 +257,36 @@
slave->mtd.name = part->name;
slave->mtd.owner = master->owner;
- slave->mtd.read = part_read;
- slave->mtd.write = part_write;
+ slave->mtd._read = part_read;
+ slave->mtd._write = part_write;
- if (master->panic_write)
- slave->mtd.panic_write = part_panic_write;
-
- if (master->read_oob)
- slave->mtd.read_oob = part_read_oob;
- if (master->write_oob)
- slave->mtd.write_oob = part_write_oob;
- if (master->read_user_prot_reg)
- slave->mtd.read_user_prot_reg = part_read_user_prot_reg;
- if (master->read_fact_prot_reg)
- slave->mtd.read_fact_prot_reg = part_read_fact_prot_reg;
- if (master->write_user_prot_reg)
- slave->mtd.write_user_prot_reg = part_write_user_prot_reg;
- if (master->lock_user_prot_reg)
- slave->mtd.lock_user_prot_reg = part_lock_user_prot_reg;
- if (master->get_user_prot_info)
- slave->mtd.get_user_prot_info = part_get_user_prot_info;
- if (master->get_fact_prot_info)
- slave->mtd.get_fact_prot_info = part_get_fact_prot_info;
- if (master->sync)
- slave->mtd.sync = part_sync;
- if (master->lock)
- slave->mtd.lock = part_lock;
- if (master->unlock)
- slave->mtd.unlock = part_unlock;
- if (master->block_isbad)
- slave->mtd.block_isbad = part_block_isbad;
- if (master->block_markbad)
- slave->mtd.block_markbad = part_block_markbad;
- slave->mtd.erase = part_erase;
+ if (master->_read_oob)
+ slave->mtd._read_oob = part_read_oob;
+ if (master->_write_oob)
+ slave->mtd._write_oob = part_write_oob;
+ if (master->_read_user_prot_reg)
+ slave->mtd._read_user_prot_reg = part_read_user_prot_reg;
+ if (master->_read_fact_prot_reg)
+ slave->mtd._read_fact_prot_reg = part_read_fact_prot_reg;
+ if (master->_write_user_prot_reg)
+ slave->mtd._write_user_prot_reg = part_write_user_prot_reg;
+ if (master->_lock_user_prot_reg)
+ slave->mtd._lock_user_prot_reg = part_lock_user_prot_reg;
+ if (master->_get_user_prot_info)
+ slave->mtd._get_user_prot_info = part_get_user_prot_info;
+ if (master->_get_fact_prot_info)
+ slave->mtd._get_fact_prot_info = part_get_fact_prot_info;
+ if (master->_sync)
+ slave->mtd._sync = part_sync;
+ if (master->_lock)
+ slave->mtd._lock = part_lock;
+ if (master->_unlock)
+ slave->mtd._unlock = part_unlock;
+ if (master->_block_isbad)
+ slave->mtd._block_isbad = part_block_isbad;
+ if (master->_block_markbad)
+ slave->mtd._block_markbad = part_block_markbad;
+ slave->mtd._erase = part_erase;
slave->master = master;
slave->offset = part->offset;
slave->index = partno;
@@ -416,12 +367,11 @@
}
slave->mtd.ecclayout = master->ecclayout;
- if (master->block_isbad) {
+ if (master->_block_isbad) {
uint64_t offs = 0;
while (offs < slave->mtd.size) {
- if (master->block_isbad(master,
- offs + slave->offset))
+ if (mtd_block_isbad(master, offs + slave->offset))
slave->mtd.ecc_stats.badblocks++;
offs += slave->mtd.erasesize;
}
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 35769c5..8821704 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -34,6 +34,7 @@
endif
COBJS-$(CONFIG_SPL_NAND_AM33XX_BCH) += am335x_spl_bch.o
+COBJS-$(CONFIG_SPL_NAND_DOCG4) += docg4_spl.o
COBJS-$(CONFIG_SPL_NAND_SIMPLE) += nand_spl_simple.o
COBJS-$(CONFIG_SPL_NAND_LOAD) += nand_spl_load.o
COBJS-$(CONFIG_SPL_NAND_ECC) += nand_ecc.o
@@ -77,6 +78,7 @@
COBJS-$(CONFIG_TEGRA_NAND) += tegra_nand.o
COBJS-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o
COBJS-$(CONFIG_NAND_PLAT) += nand_plat.o
+COBJS-$(CONFIG_NAND_DOCG4) += docg4.o
else # minimal SPL drivers
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 994dd9f..3bfbaf8 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -489,7 +489,7 @@
}
static int atmel_nand_pmecc_read_page(struct mtd_info *mtd,
- struct nand_chip *chip, uint8_t *buf, int page)
+ struct nand_chip *chip, uint8_t *buf, int oob_required, int page)
{
struct atmel_nand_host *host = chip->priv;
int eccsize = chip->ecc.size;
@@ -529,8 +529,9 @@
return 0;
}
-static void atmel_nand_pmecc_write_page(struct mtd_info *mtd,
- struct nand_chip *chip, const uint8_t *buf)
+static int atmel_nand_pmecc_write_page(struct mtd_info *mtd,
+ struct nand_chip *chip, const uint8_t *buf,
+ int oob_required)
{
struct atmel_nand_host *host = chip->priv;
uint32_t *eccpos = chip->ecc.layout->eccpos;
@@ -557,7 +558,7 @@
if (!timeout) {
printk(KERN_ERR "atmel_nand : Timeout to read PMECC status, fail to write PMECC in oob\n");
- return;
+ goto out;
}
for (i = 0; i < host->pmecc_sector_number; i++) {
@@ -570,6 +571,8 @@
}
}
chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+out:
+ return 0;
}
static void atmel_pmecc_core_init(struct mtd_info *mtd)
@@ -706,6 +709,7 @@
nand->ecc.read_page = atmel_nand_pmecc_read_page;
nand->ecc.write_page = atmel_nand_pmecc_write_page;
+ nand->ecc.strength = cap;
atmel_pmecc_core_init(mtd);
@@ -775,9 +779,10 @@
* mtd: mtd info structure
* chip: nand chip info structure
* buf: buffer to store read data
+ * oob_required: caller expects OOB data read to chip->oob_poi
*/
-static int atmel_nand_read_page(struct mtd_info *mtd,
- struct nand_chip *chip, uint8_t *buf, int page)
+static int atmel_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
{
int eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
diff --git a/drivers/mtd/nand/bfin_nand.c b/drivers/mtd/nand/bfin_nand.c
index c7ddbb2..7e755e8 100644
--- a/drivers/mtd/nand/bfin_nand.c
+++ b/drivers/mtd/nand/bfin_nand.c
@@ -374,9 +374,11 @@
if (!NAND_IS_512()) {
chip->ecc.bytes = 3;
chip->ecc.size = 256;
+ chip->ecc.strength = 1;
} else {
chip->ecc.bytes = 6;
chip->ecc.size = 512;
+ chip->ecc.strength = 2;
}
chip->ecc.mode = NAND_ECC_HW;
chip->ecc.calculate = bfin_nfc_calculate_ecc;
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index e8506dd..90f5985 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -607,12 +607,13 @@
{
nand->chip_delay = 0;
#ifdef CONFIG_SYS_NAND_USE_FLASH_BBT
- nand->options |= NAND_USE_FLASH_BBT;
+ nand->bbt_options |= NAND_BBT_USE_FLASH;
#endif
#ifdef CONFIG_SYS_NAND_HW_ECC
nand->ecc.mode = NAND_ECC_HW;
nand->ecc.size = 512;
nand->ecc.bytes = 3;
+ nand->ecc.strength = 1;
nand->ecc.calculate = nand_davinci_calculate_ecc;
nand->ecc.correct = nand_davinci_correct_data;
nand->ecc.hwctl = nand_davinci_enable_hwecc;
@@ -623,6 +624,7 @@
nand->ecc.mode = NAND_ECC_HW_OOB_FIRST;
nand->ecc.size = 512;
nand->ecc.bytes = 10;
+ nand->ecc.strength = 4;
nand->ecc.calculate = nand_davinci_4bit_calculate_ecc;
nand->ecc.correct = nand_davinci_4bit_correct_data;
nand->ecc.hwctl = nand_davinci_4bit_enable_hwecc;
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index edf3a099..4cd741e 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -134,7 +134,7 @@
/*
* The HW decoder in the DoC ASIC's provides us a error syndrome,
- * which we must convert to a standard syndrom usable by the generic
+ * which we must convert to a standard syndrome usable by the generic
* Reed-Solomon library code.
*
* Fabrice Bellard figured this out in the old docecc code. I added
@@ -154,7 +154,7 @@
ds[3] = ((ecc[3] & 0xc0) >> 6) | ((ecc[0] & 0xff) << 2);
parity = ecc[1];
- /* Initialize the syndrom buffer */
+ /* Initialize the syndrome buffer */
for (i = 0; i < NROOTS; i++)
s[i] = ds[0];
/*
@@ -1033,7 +1033,7 @@
WriteDOC(DOC_ECC_DIS, docptr, Mplus_ECCConf);
else
WriteDOC(DOC_ECC_DIS, docptr, ECCConf);
- if (no_ecc_failures && (ret == -EBADMSG)) {
+ if (no_ecc_failures && mtd_is_eccerr(ret)) {
printk(KERN_ERR "suppressing ECC failure\n");
ret = 0;
}
@@ -1073,7 +1073,7 @@
size_t retlen;
for (offs = 0; offs < mtd->size; offs += mtd->erasesize) {
- ret = mtd->read(mtd, offs, mtd->writesize, &retlen, buf);
+ ret = mtd_read(mtd, offs, mtd->writesize, &retlen, buf);
if (retlen != mtd->writesize)
continue;
if (ret) {
@@ -1098,7 +1098,7 @@
/* Only one mediaheader was found. We want buf to contain a
mediaheader on return, so we'll have to re-read the one we found. */
offs = doc->mh0_page << this->page_shift;
- ret = mtd->read(mtd, offs, mtd->writesize, &retlen, buf);
+ ret = mtd_read(mtd, offs, mtd->writesize, &retlen, buf);
if (retlen != mtd->writesize) {
/* Insanity. Give up. */
printk(KERN_ERR "Read DiskOnChip Media Header once, but can't reread it???\n");
@@ -1658,7 +1658,8 @@
nand->ecc.mode = NAND_ECC_HW_SYNDROME;
nand->ecc.size = 512;
nand->ecc.bytes = 6;
- nand->options = NAND_USE_FLASH_BBT;
+ nand->ecc.strength = 2;
+ nand->bbt_options = NAND_BBT_USE_FLASH;
doc->physadr = physadr;
doc->virtadr = virtadr;
diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c
new file mode 100644
index 0000000..7dd9953
--- /dev/null
+++ b/drivers/mtd/nand/docg4.c
@@ -0,0 +1,1028 @@
+/*
+ * drivers/mtd/nand/docg4.c
+ *
+ * Copyright (C) 2013 Mike Dunn <mikedunn@newsguy.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ *
+ * mtd nand driver for M-Systems DiskOnChip G4
+ *
+ * Tested on the Palm Treo 680. The G4 is also present on Toshiba Portege, Asus
+ * P526, some HTC smartphones (Wizard, Prophet, ...), O2 XDA Zinc, maybe others.
+ * Should work on these as well. Let me know!
+ *
+ * TODO:
+ *
+ * Mechanism for management of password-protected areas
+ *
+ * Hamming ecc when reading oob only
+ *
+ * According to the M-Sys documentation, this device is also available in a
+ * "dual-die" configuration having a 256MB capacity, but no mechanism for
+ * detecting this variant is documented. Currently this driver assumes 128MB
+ * capacity.
+ *
+ * Support for multiple cascaded devices ("floors"). Not sure which gadgets
+ * contain multiple G4s in a cascaded configuration, if any.
+ *
+ */
+
+
+#include <common.h>
+#include <asm/arch/hardware.h>
+#include <asm/io.h>
+#include <asm/bitops.h>
+#include <asm/errno.h>
+#include <malloc.h>
+#include <nand.h>
+#include <linux/bch.h>
+#include <linux/bitrev.h>
+#include <linux/mtd/docg4.h>
+
+/*
+ * The device has a nop register which M-Sys claims is for the purpose of
+ * inserting precise delays. But beware; at least some operations fail if the
+ * nop writes are replaced with a generic delay!
+ */
+static inline void write_nop(void __iomem *docptr)
+{
+ writew(0, docptr + DOC_NOP);
+}
+
+
+static int poll_status(void __iomem *docptr)
+{
+ /*
+ * Busy-wait for the FLASHREADY bit to be set in the FLASHCONTROL
+ * register. Operations known to take a long time (e.g., block erase)
+ * should sleep for a while before calling this.
+ */
+
+ uint8_t flash_status;
+
+ /* hardware quirk requires reading twice initially */
+ flash_status = readb(docptr + DOC_FLASHCONTROL);
+
+ do {
+ flash_status = readb(docptr + DOC_FLASHCONTROL);
+ } while (!(flash_status & DOC_CTRL_FLASHREADY));
+
+ return 0;
+}
+
+static void write_addr(void __iomem *docptr, uint32_t docg4_addr)
+{
+ /* write the four address bytes packed in docg4_addr to the device */
+
+ writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS);
+ docg4_addr >>= 8;
+ writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS);
+ docg4_addr >>= 8;
+ writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS);
+ docg4_addr >>= 8;
+ writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS);
+}
+
+/*
+ * This is a module parameter in the linux kernel version of this driver. It is
+ * hard-coded to 'off' for u-boot. This driver uses oob to mark bad blocks.
+ * This can be problematic when dealing with data not intended for the mtd/nand
+ * subsystem. For example, on boards that boot from the docg4 and use the IPL
+ * to load an spl + u-boot image, the blocks containing the image will be
+ * reported as "bad" because the oob of the first page of each block contains a
+ * magic number that the IPL looks for, which causes the badblock scan to
+ * erroneously add them to the bad block table. To erase such a block, use
+ * u-boot's 'nand scrub'. scrub is safe for the docg4. The device does have a
+ * factory bad block table, but it is read-only, and is used in conjunction with
+ * oob bad block markers that are written by mtd/nand when a block is deemed to
+ * be bad. To read data from "bad" blocks, use 'read.raw'. Unfortunately,
+ * read.raw does not use ecc, which would still work fine on such misidentified
+ * bad blocks. TODO: u-boot nand utilities need the ability to ignore bad
+ * blocks.
+ */
+static const int ignore_badblocks; /* remains false */
+
+struct docg4_priv {
+ int status;
+ struct {
+ unsigned int command;
+ int column;
+ int page;
+ } last_command;
+ uint8_t oob_buf[16];
+ uint8_t ecc_buf[7];
+ int oob_page;
+ struct bch_control *bch;
+};
+/*
+ * Oob bytes 0 - 6 are available to the user.
+ * Byte 7 is hamming ecc for first 7 bytes. Bytes 8 - 14 are hw-generated ecc.
+ * Byte 15 (the last) is used by the driver as a "page written" flag.
+ */
+static struct nand_ecclayout docg4_oobinfo = {
+ .eccbytes = 9,
+ .eccpos = {7, 8, 9, 10, 11, 12, 13, 14, 15},
+ .oobavail = 7,
+ .oobfree = { {0, 7} }
+};
+
+static void reset(void __iomem *docptr)
+{
+ /* full device reset */
+
+ writew(DOC_ASICMODE_RESET | DOC_ASICMODE_MDWREN, docptr + DOC_ASICMODE);
+ writew(~(DOC_ASICMODE_RESET | DOC_ASICMODE_MDWREN),
+ docptr + DOC_ASICMODECONFIRM);
+ write_nop(docptr);
+
+ writew(DOC_ASICMODE_NORMAL | DOC_ASICMODE_MDWREN,
+ docptr + DOC_ASICMODE);
+ writew(~(DOC_ASICMODE_NORMAL | DOC_ASICMODE_MDWREN),
+ docptr + DOC_ASICMODECONFIRM);
+
+ writew(DOC_ECCCONF1_ECC_ENABLE, docptr + DOC_ECCCONF1);
+
+ poll_status(docptr);
+}
+
+static void docg4_select_chip(struct mtd_info *mtd, int chip)
+{
+ /*
+ * Select among multiple cascaded chips ("floors"). Multiple floors are
+ * not yet supported, so the only valid non-negative value is 0.
+ */
+ void __iomem *docptr = CONFIG_SYS_NAND_BASE;
+
+ if (chip < 0)
+ return; /* deselected */
+
+ if (chip > 0)
+ printf("multiple floors currently unsupported\n");
+
+ writew(0, docptr + DOC_DEVICESELECT);
+}
+
+static void read_hw_ecc(void __iomem *docptr, uint8_t *ecc_buf)
+{
+ /* read the 7 hw-generated ecc bytes */
+
+ int i;
+ for (i = 0; i < 7; i++) { /* hw quirk; read twice */
+ ecc_buf[i] = readb(docptr + DOC_BCH_SYNDROM(i));
+ ecc_buf[i] = readb(docptr + DOC_BCH_SYNDROM(i));
+ }
+}
+
+static int correct_data(struct mtd_info *mtd, uint8_t *buf, int page)
+{
+ /*
+ * Called after a page read when hardware reports bitflips.
+ * Up to four bitflips can be corrected.
+ */
+
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+ void __iomem *docptr = CONFIG_SYS_NAND_BASE;
+ int i, numerrs;
+ unsigned int errpos[4];
+ const uint8_t blank_read_hwecc[8] = {
+ 0xcf, 0x72, 0xfc, 0x1b, 0xa9, 0xc7, 0xb9, 0 };
+
+ read_hw_ecc(docptr, doc->ecc_buf); /* read 7 hw-generated ecc bytes */
+
+ /* check if read error is due to a blank page */
+ if (!memcmp(doc->ecc_buf, blank_read_hwecc, 7))
+ return 0; /* yes */
+
+ /* skip additional check of "written flag" if ignore_badblocks */
+ if (!ignore_badblocks) {
+ /*
+ * If the hw ecc bytes are not those of a blank page, there's
+ * still a chance that the page is blank, but was read with
+ * errors. Check the "written flag" in last oob byte, which
+ * is set to zero when a page is written. If more than half
+ * the bits are set, assume a blank page. Unfortunately, the
+ * bit flips(s) are not reported in stats.
+ */
+
+ if (doc->oob_buf[15]) {
+ int bit, numsetbits = 0;
+ unsigned long written_flag = doc->oob_buf[15];
+
+ for (bit = 0; bit < 8; bit++) {
+ if (written_flag & 0x01)
+ numsetbits++;
+ written_flag >>= 1;
+ }
+ if (numsetbits > 4) { /* assume blank */
+ printf("errors in blank page at offset %08x\n",
+ page * DOCG4_PAGE_SIZE);
+ return 0;
+ }
+ }
+ }
+
+ /*
+ * The hardware ecc unit produces oob_ecc ^ calc_ecc. The kernel's bch
+ * algorithm is used to decode this. However the hw operates on page
+ * data in a bit order that is the reverse of that of the bch alg,
+ * requiring that the bits be reversed on the result. Thanks to Ivan
+ * Djelic for his analysis!
+ */
+ for (i = 0; i < 7; i++)
+ doc->ecc_buf[i] = bitrev8(doc->ecc_buf[i]);
+
+ numerrs = decode_bch(doc->bch, NULL, DOCG4_USERDATA_LEN, NULL,
+ doc->ecc_buf, NULL, errpos);
+
+ if (numerrs == -EBADMSG) {
+ printf("uncorrectable errors at offset %08x\n",
+ page * DOCG4_PAGE_SIZE);
+ return -EBADMSG;
+ }
+
+ BUG_ON(numerrs < 0); /* -EINVAL, or anything other than -EBADMSG */
+
+ /* undo last step in BCH alg (modulo mirroring not needed) */
+ for (i = 0; i < numerrs; i++)
+ errpos[i] = (errpos[i] & ~7)|(7-(errpos[i] & 7));
+
+ /* fix the errors */
+ for (i = 0; i < numerrs; i++) {
+ /* ignore if error within oob ecc bytes */
+ if (errpos[i] > DOCG4_USERDATA_LEN * 8)
+ continue;
+
+ /* if error within oob area preceeding ecc bytes... */
+ if (errpos[i] > DOCG4_PAGE_SIZE * 8)
+ __change_bit(errpos[i] - DOCG4_PAGE_SIZE * 8,
+ (unsigned long *)doc->oob_buf);
+
+ else /* error in page data */
+ __change_bit(errpos[i], (unsigned long *)buf);
+ }
+
+ printf("%d error(s) corrected at offset %08x\n",
+ numerrs, page * DOCG4_PAGE_SIZE);
+
+ return numerrs;
+}
+
+static int read_progstatus(struct docg4_priv *doc, void __iomem *docptr)
+{
+ /*
+ * This apparently checks the status of programming. Done after an
+ * erasure, and after page data is written. On error, the status is
+ * saved, to be later retrieved by the nand infrastructure code.
+ */
+
+ /* status is read from the I/O reg */
+ uint16_t status1 = readw(docptr + DOC_IOSPACE_DATA);
+ uint16_t status2 = readw(docptr + DOC_IOSPACE_DATA);
+ uint16_t status3 = readw(docptr + DOCG4_MYSTERY_REG);
+
+ MTDDEBUG(MTD_DEBUG_LEVEL3, "docg4: %s: %02x %02x %02x\n",
+ __func__, status1, status2, status3);
+
+ if (status1 != DOCG4_PROGSTATUS_GOOD ||
+ status2 != DOCG4_PROGSTATUS_GOOD_2 ||
+ status3 != DOCG4_PROGSTATUS_GOOD_2) {
+ doc->status = NAND_STATUS_FAIL;
+ printf("read_progstatus failed: %02x, %02x, %02x\n",
+ status1, status2, status3);
+ return -EIO;
+ }
+ return 0;
+}
+
+static int pageprog(struct mtd_info *mtd)
+{
+ /*
+ * Final step in writing a page. Writes the contents of its
+ * internal buffer out to the flash array, or some such.
+ */
+
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+ void __iomem *docptr = CONFIG_SYS_NAND_BASE;
+ int retval = 0;
+
+ MTDDEBUG(MTD_DEBUG_LEVEL3, "docg4: %s\n", __func__);
+
+ writew(DOCG4_SEQ_PAGEPROG, docptr + DOC_FLASHSEQUENCE);
+ writew(DOC_CMD_PROG_CYCLE2, docptr + DOC_FLASHCOMMAND);
+ write_nop(docptr);
+ write_nop(docptr);
+
+ /* Just busy-wait; usleep_range() slows things down noticeably. */
+ poll_status(docptr);
+
+ writew(DOCG4_SEQ_FLUSH, docptr + DOC_FLASHSEQUENCE);
+ writew(DOCG4_CMD_FLUSH, docptr + DOC_FLASHCOMMAND);
+ writew(DOC_ECCCONF0_READ_MODE | 4, docptr + DOC_ECCCONF0);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+
+ retval = read_progstatus(doc, docptr);
+ writew(0, docptr + DOC_DATAEND);
+ write_nop(docptr);
+ poll_status(docptr);
+ write_nop(docptr);
+
+ return retval;
+}
+
+static void sequence_reset(void __iomem *docptr)
+{
+ /* common starting sequence for all operations */
+
+ writew(DOC_CTRL_UNKNOWN | DOC_CTRL_CE, docptr + DOC_FLASHCONTROL);
+ writew(DOC_SEQ_RESET, docptr + DOC_FLASHSEQUENCE);
+ writew(DOC_CMD_RESET, docptr + DOC_FLASHCOMMAND);
+ write_nop(docptr);
+ write_nop(docptr);
+ poll_status(docptr);
+ write_nop(docptr);
+}
+
+static void read_page_prologue(void __iomem *docptr, uint32_t docg4_addr)
+{
+ /* first step in reading a page */
+
+ sequence_reset(docptr);
+
+ writew(DOCG4_SEQ_PAGE_READ, docptr + DOC_FLASHSEQUENCE);
+ writew(DOCG4_CMD_PAGE_READ, docptr + DOC_FLASHCOMMAND);
+ write_nop(docptr);
+
+ write_addr(docptr, docg4_addr);
+
+ write_nop(docptr);
+ writew(DOCG4_CMD_READ2, docptr + DOC_FLASHCOMMAND);
+ write_nop(docptr);
+ write_nop(docptr);
+
+ poll_status(docptr);
+}
+
+static void write_page_prologue(void __iomem *docptr, uint32_t docg4_addr)
+{
+ /* first step in writing a page */
+
+ sequence_reset(docptr);
+ writew(DOCG4_SEQ_PAGEWRITE, docptr + DOC_FLASHSEQUENCE);
+ writew(DOCG4_CMD_PAGEWRITE, docptr + DOC_FLASHCOMMAND);
+ write_nop(docptr);
+ write_addr(docptr, docg4_addr);
+ write_nop(docptr);
+ write_nop(docptr);
+ poll_status(docptr);
+}
+
+static uint32_t mtd_to_docg4_address(int page, int column)
+{
+ /*
+ * Convert mtd address to format used by the device, 32 bit packed.
+ *
+ * Some notes on G4 addressing... The M-Sys documentation on this device
+ * claims that pages are 2K in length, and indeed, the format of the
+ * address used by the device reflects that. But within each page are
+ * four 512 byte "sub-pages", each with its own oob data that is
+ * read/written immediately after the 512 bytes of page data. This oob
+ * data contains the ecc bytes for the preceeding 512 bytes.
+ *
+ * Rather than tell the mtd nand infrastructure that page size is 2k,
+ * with four sub-pages each, we engage in a little subterfuge and tell
+ * the infrastructure code that pages are 512 bytes in size. This is
+ * done because during the course of reverse-engineering the device, I
+ * never observed an instance where an entire 2K "page" was read or
+ * written as a unit. Each "sub-page" is always addressed individually,
+ * its data read/written, and ecc handled before the next "sub-page" is
+ * addressed.
+ *
+ * This requires us to convert addresses passed by the mtd nand
+ * infrastructure code to those used by the device.
+ *
+ * The address that is written to the device consists of four bytes: the
+ * first two are the 2k page number, and the second is the index into
+ * the page. The index is in terms of 16-bit half-words and includes
+ * the preceeding oob data, so e.g., the index into the second
+ * "sub-page" is 0x108, and the full device address of the start of mtd
+ * page 0x201 is 0x00800108.
+ */
+ int g4_page = page / 4; /* device's 2K page */
+ int g4_index = (page % 4) * 0x108 + column/2; /* offset into page */
+ return (g4_page << 16) | g4_index; /* pack */
+}
+
+static void docg4_command(struct mtd_info *mtd, unsigned command, int column,
+ int page_addr)
+{
+ /* handle standard nand commands */
+
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+ uint32_t g4_addr = mtd_to_docg4_address(page_addr, column);
+
+ MTDDEBUG(MTD_DEBUG_LEVEL3, "%s %x, page_addr=%x, column=%x\n",
+ __func__, command, page_addr, column);
+
+ /*
+ * Save the command and its arguments. This enables emulation of
+ * standard flash devices, and also some optimizations.
+ */
+ doc->last_command.command = command;
+ doc->last_command.column = column;
+ doc->last_command.page = page_addr;
+
+ switch (command) {
+ case NAND_CMD_RESET:
+ reset(CONFIG_SYS_NAND_BASE);
+ break;
+
+ case NAND_CMD_READ0:
+ read_page_prologue(CONFIG_SYS_NAND_BASE, g4_addr);
+ break;
+
+ case NAND_CMD_STATUS:
+ /* next call to read_byte() will expect a status */
+ break;
+
+ case NAND_CMD_SEQIN:
+ write_page_prologue(CONFIG_SYS_NAND_BASE, g4_addr);
+
+ /* hack for deferred write of oob bytes */
+ if (doc->oob_page == page_addr)
+ memcpy(nand->oob_poi, doc->oob_buf, 16);
+ break;
+
+ case NAND_CMD_PAGEPROG:
+ pageprog(mtd);
+ break;
+
+ /* we don't expect these, based on review of nand_base.c */
+ case NAND_CMD_READOOB:
+ case NAND_CMD_READID:
+ case NAND_CMD_ERASE1:
+ case NAND_CMD_ERASE2:
+ printf("docg4_command: unexpected nand command 0x%x\n",
+ command);
+ break;
+ }
+}
+
+static void docg4_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ int i;
+ struct nand_chip *nand = mtd->priv;
+ uint16_t *p = (uint16_t *)buf;
+ len >>= 1;
+
+ for (i = 0; i < len; i++)
+ p[i] = readw(nand->IO_ADDR_R);
+}
+
+static int docg4_read_oob(struct mtd_info *mtd, struct nand_chip *nand,
+ int page, int sndcmd)
+{
+ struct docg4_priv *doc = nand->priv;
+ void __iomem *docptr = CONFIG_SYS_NAND_BASE;
+ uint16_t status;
+
+ MTDDEBUG(MTD_DEBUG_LEVEL3, "%s: page %x\n", __func__, page);
+
+ /*
+ * Oob bytes are read as part of a normal page read. If the previous
+ * nand command was a read of the page whose oob is now being read, just
+ * copy the oob bytes that we saved in a local buffer and avoid a
+ * separate oob read.
+ */
+ if (doc->last_command.command == NAND_CMD_READ0 &&
+ doc->last_command.page == page) {
+ memcpy(nand->oob_poi, doc->oob_buf, 16);
+ return 0;
+ }
+
+ /*
+ * Separate read of oob data only.
+ */
+ docg4_command(mtd, NAND_CMD_READ0, nand->ecc.size, page);
+
+ writew(DOC_ECCCONF0_READ_MODE | DOCG4_OOB_SIZE, docptr + DOC_ECCCONF0);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+
+ /* the 1st byte from the I/O reg is a status; the rest is oob data */
+ status = readw(docptr + DOC_IOSPACE_DATA);
+ if (status & DOCG4_READ_ERROR) {
+ printf("docg4_read_oob failed: status = 0x%02x\n", status);
+ return -EIO;
+ }
+
+ MTDDEBUG(MTD_DEBUG_LEVEL3, "%s: status = 0x%x\n", __func__, status);
+
+ docg4_read_buf(mtd, nand->oob_poi, 16);
+
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+ writew(0, docptr + DOC_DATAEND);
+ write_nop(docptr);
+
+ return 0;
+}
+
+static int docg4_write_oob(struct mtd_info *mtd, struct nand_chip *nand,
+ int page)
+{
+ /*
+ * Writing oob-only is not really supported, because MLC nand must write
+ * oob bytes at the same time as page data. Nonetheless, we save the
+ * oob buffer contents here, and then write it along with the page data
+ * if the same page is subsequently written. This allows user space
+ * utilities that write the oob data prior to the page data to work
+ * (e.g., nandwrite). The disdvantage is that, if the intention was to
+ * write oob only, the operation is quietly ignored. Also, oob can get
+ * corrupted if two concurrent processes are running nandwrite.
+ */
+
+ /* note that bytes 7..14 are hw generated hamming/ecc and overwritten */
+ struct docg4_priv *doc = nand->priv;
+ doc->oob_page = page;
+ memcpy(doc->oob_buf, nand->oob_poi, 16);
+ return 0;
+}
+
+static int docg4_block_neverbad(struct mtd_info *mtd, loff_t ofs, int getchip)
+{
+ /* only called when module_param ignore_badblocks is set */
+ return 0;
+}
+
+static void docg4_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ int i;
+ struct nand_chip *nand = mtd->priv;
+ uint16_t *p = (uint16_t *)buf;
+ len >>= 1;
+
+ for (i = 0; i < len; i++)
+ writew(p[i], nand->IO_ADDR_W);
+}
+
+static void write_page(struct mtd_info *mtd, struct nand_chip *nand,
+ const uint8_t *buf, int use_ecc)
+{
+ void __iomem *docptr = CONFIG_SYS_NAND_BASE;
+ uint8_t ecc_buf[8];
+
+ writew(DOC_ECCCONF0_ECC_ENABLE |
+ DOC_ECCCONF0_UNKNOWN |
+ DOCG4_BCH_SIZE,
+ docptr + DOC_ECCCONF0);
+ write_nop(docptr);
+
+ /* write the page data */
+ docg4_write_buf16(mtd, buf, DOCG4_PAGE_SIZE);
+
+ /* oob bytes 0 through 5 are written to I/O reg */
+ docg4_write_buf16(mtd, nand->oob_poi, 6);
+
+ /* oob byte 6 written to a separate reg */
+ writew(nand->oob_poi[6], docptr + DOCG4_OOB_6_7);
+
+ write_nop(docptr);
+ write_nop(docptr);
+
+ /* write hw-generated ecc bytes to oob */
+ if (likely(use_ecc)) {
+ /* oob byte 7 is hamming code */
+ uint8_t hamming = readb(docptr + DOC_HAMMINGPARITY);
+ hamming = readb(docptr + DOC_HAMMINGPARITY); /* 2nd read */
+ writew(hamming, docptr + DOCG4_OOB_6_7);
+ write_nop(docptr);
+
+ /* read the 7 bch bytes from ecc regs */
+ read_hw_ecc(docptr, ecc_buf);
+ ecc_buf[7] = 0; /* clear the "page written" flag */
+ }
+
+ /* write user-supplied bytes to oob */
+ else {
+ writew(nand->oob_poi[7], docptr + DOCG4_OOB_6_7);
+ write_nop(docptr);
+ memcpy(ecc_buf, &nand->oob_poi[8], 8);
+ }
+
+ docg4_write_buf16(mtd, ecc_buf, 8);
+ write_nop(docptr);
+ write_nop(docptr);
+ writew(0, docptr + DOC_DATAEND);
+ write_nop(docptr);
+}
+
+static void docg4_write_page_raw(struct mtd_info *mtd, struct nand_chip *nand,
+ const uint8_t *buf)
+{
+ return write_page(mtd, nand, buf, 0);
+}
+
+static void docg4_write_page(struct mtd_info *mtd, struct nand_chip *nand,
+ const uint8_t *buf)
+{
+ return write_page(mtd, nand, buf, 1);
+}
+
+static int read_page(struct mtd_info *mtd, struct nand_chip *nand,
+ uint8_t *buf, int page, int use_ecc)
+{
+ struct docg4_priv *doc = nand->priv;
+ void __iomem *docptr = CONFIG_SYS_NAND_BASE;
+ uint16_t status, edc_err, *buf16;
+
+ writew(DOC_ECCCONF0_READ_MODE |
+ DOC_ECCCONF0_ECC_ENABLE |
+ DOC_ECCCONF0_UNKNOWN |
+ DOCG4_BCH_SIZE,
+ docptr + DOC_ECCCONF0);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+
+ /* the 1st byte from the I/O reg is a status; the rest is page data */
+ status = readw(docptr + DOC_IOSPACE_DATA);
+ if (status & DOCG4_READ_ERROR) {
+ printf("docg4_read_page: bad status: 0x%02x\n", status);
+ writew(0, docptr + DOC_DATAEND);
+ return -EIO;
+ }
+
+ docg4_read_buf(mtd, buf, DOCG4_PAGE_SIZE); /* read the page data */
+
+ /* first 14 oob bytes read from I/O reg */
+ docg4_read_buf(mtd, nand->oob_poi, 14);
+
+ /* last 2 read from another reg */
+ buf16 = (uint16_t *)(nand->oob_poi + 14);
+ *buf16 = readw(docptr + DOCG4_MYSTERY_REG);
+
+ /*
+ * Diskonchips read oob immediately after a page read. Mtd
+ * infrastructure issues a separate command for reading oob after the
+ * page is read. So we save the oob bytes in a local buffer and just
+ * copy it if the next command reads oob from the same page.
+ */
+ memcpy(doc->oob_buf, nand->oob_poi, 16);
+
+ write_nop(docptr);
+
+ if (likely(use_ecc)) {
+ /* read the register that tells us if bitflip(s) detected */
+ edc_err = readw(docptr + DOC_ECCCONF1);
+ edc_err = readw(docptr + DOC_ECCCONF1);
+
+ /* If bitflips are reported, attempt to correct with ecc */
+ if (edc_err & DOC_ECCCONF1_BCH_SYNDROM_ERR) {
+ int bits_corrected = correct_data(mtd, buf, page);
+ if (bits_corrected == -EBADMSG)
+ mtd->ecc_stats.failed++;
+ else
+ mtd->ecc_stats.corrected += bits_corrected;
+ }
+ }
+
+ writew(0, docptr + DOC_DATAEND);
+ return 0;
+}
+
+
+static int docg4_read_page_raw(struct mtd_info *mtd, struct nand_chip *nand,
+ uint8_t *buf, int page)
+{
+ return read_page(mtd, nand, buf, page, 0);
+}
+
+static int docg4_read_page(struct mtd_info *mtd, struct nand_chip *nand,
+ uint8_t *buf, int page)
+{
+ return read_page(mtd, nand, buf, page, 1);
+}
+
+static void docg4_erase_block(struct mtd_info *mtd, int page)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+ void __iomem *docptr = CONFIG_SYS_NAND_BASE;
+ uint16_t g4_page;
+
+ MTDDEBUG(MTD_DEBUG_LEVEL3, "%s: page %04x\n", __func__, page);
+
+ sequence_reset(docptr);
+
+ writew(DOCG4_SEQ_BLOCKERASE, docptr + DOC_FLASHSEQUENCE);
+ writew(DOC_CMD_PROG_BLOCK_ADDR, docptr + DOC_FLASHCOMMAND);
+ write_nop(docptr);
+
+ /* only 2 bytes of address are written to specify erase block */
+ g4_page = (uint16_t)(page / 4); /* to g4's 2k page addressing */
+ writeb(g4_page & 0xff, docptr + DOC_FLASHADDRESS);
+ g4_page >>= 8;
+ writeb(g4_page & 0xff, docptr + DOC_FLASHADDRESS);
+ write_nop(docptr);
+
+ /* start the erasure */
+ writew(DOC_CMD_ERASECYCLE2, docptr + DOC_FLASHCOMMAND);
+ write_nop(docptr);
+ write_nop(docptr);
+
+ poll_status(docptr);
+ writew(DOCG4_SEQ_FLUSH, docptr + DOC_FLASHSEQUENCE);
+ writew(DOCG4_CMD_FLUSH, docptr + DOC_FLASHCOMMAND);
+ writew(DOC_ECCCONF0_READ_MODE | 4, docptr + DOC_ECCCONF0);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+
+ read_progstatus(doc, docptr);
+
+ writew(0, docptr + DOC_DATAEND);
+ write_nop(docptr);
+ poll_status(docptr);
+ write_nop(docptr);
+}
+
+static int read_factory_bbt(struct mtd_info *mtd)
+{
+ /*
+ * The device contains a read-only factory bad block table. Read it and
+ * update the memory-based bbt accordingly.
+ */
+
+ struct nand_chip *nand = mtd->priv;
+ uint32_t g4_addr = mtd_to_docg4_address(DOCG4_FACTORY_BBT_PAGE, 0);
+ uint8_t *buf;
+ int i, block, status;
+
+ buf = kzalloc(DOCG4_PAGE_SIZE, GFP_KERNEL);
+ if (buf == NULL)
+ return -ENOMEM;
+
+ read_page_prologue(CONFIG_SYS_NAND_BASE, g4_addr);
+ status = docg4_read_page(mtd, nand, buf, DOCG4_FACTORY_BBT_PAGE);
+ if (status)
+ goto exit;
+
+ /*
+ * If no memory-based bbt was created, exit. This will happen if module
+ * parameter ignore_badblocks is set. Then why even call this function?
+ * For an unknown reason, block erase always fails if it's the first
+ * operation after device power-up. The above read ensures it never is.
+ * Ugly, I know.
+ */
+ if (nand->bbt == NULL) /* no memory-based bbt */
+ goto exit;
+
+ /*
+ * Parse factory bbt and update memory-based bbt. Factory bbt format is
+ * simple: one bit per block, block numbers increase left to right (msb
+ * to lsb). Bit clear means bad block.
+ */
+ for (i = block = 0; block < DOCG4_NUMBLOCKS; block += 8, i++) {
+ int bitnum;
+ uint8_t mask;
+ for (bitnum = 0, mask = 0x80;
+ bitnum < 8; bitnum++, mask >>= 1) {
+ if (!(buf[i] & mask)) {
+ int badblock = block + bitnum;
+ nand->bbt[badblock / 4] |=
+ 0x03 << ((badblock % 4) * 2);
+ mtd->ecc_stats.badblocks++;
+ printf("factory-marked bad block: %d\n",
+ badblock);
+ }
+ }
+ }
+ exit:
+ kfree(buf);
+ return status;
+}
+
+static int docg4_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+ /*
+ * Mark a block as bad. Bad blocks are marked in the oob area of the
+ * first page of the block. The default scan_bbt() in the nand
+ * infrastructure code works fine for building the memory-based bbt
+ * during initialization, as does the nand infrastructure function that
+ * checks if a block is bad by reading the bbt. This function replaces
+ * the nand default because writes to oob-only are not supported.
+ */
+
+ int ret, i;
+ uint8_t *buf;
+ struct nand_chip *nand = mtd->priv;
+ struct nand_bbt_descr *bbtd = nand->badblock_pattern;
+ int block = (int)(ofs >> nand->bbt_erase_shift);
+ int page = (int)(ofs >> nand->page_shift);
+ uint32_t g4_addr = mtd_to_docg4_address(page, 0);
+
+ MTDDEBUG(MTD_DEBUG_LEVEL3, "%s: %08llx\n", __func__, ofs);
+
+ if (unlikely(ofs & (DOCG4_BLOCK_SIZE - 1)))
+ printf("%s: ofs %llx not start of block!\n",
+ __func__, ofs);
+
+ /* allocate blank buffer for page data */
+ buf = kzalloc(DOCG4_PAGE_SIZE, GFP_KERNEL);
+ if (buf == NULL)
+ return -ENOMEM;
+
+ /* update bbt in memory */
+ nand->bbt[block / 4] |= 0x01 << ((block & 0x03) * 2);
+
+ /* write bit-wise negation of pattern to oob buffer */
+ memset(nand->oob_poi, 0xff, mtd->oobsize);
+ for (i = 0; i < bbtd->len; i++)
+ nand->oob_poi[bbtd->offs + i] = ~bbtd->pattern[i];
+
+ /* write first page of block */
+ write_page_prologue(CONFIG_SYS_NAND_BASE, g4_addr);
+ docg4_write_page(mtd, nand, buf);
+ ret = pageprog(mtd);
+ if (!ret)
+ mtd->ecc_stats.badblocks++;
+
+ kfree(buf);
+
+ return ret;
+}
+
+static uint8_t docg4_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+
+ MTDDEBUG(MTD_DEBUG_LEVEL3, "%s\n", __func__);
+
+ if (doc->last_command.command == NAND_CMD_STATUS) {
+ int status;
+
+ /*
+ * Previous nand command was status request, so nand
+ * infrastructure code expects to read the status here. If an
+ * error occurred in a previous operation, report it.
+ */
+ doc->last_command.command = 0;
+
+ if (doc->status) {
+ status = doc->status;
+ doc->status = 0;
+ }
+
+ /* why is NAND_STATUS_WP inverse logic?? */
+ else
+ status = NAND_STATUS_WP | NAND_STATUS_READY;
+
+ return status;
+ }
+
+ printf("unexpectd call to read_byte()\n");
+
+ return 0;
+}
+
+static int docg4_wait(struct mtd_info *mtd, struct nand_chip *nand)
+{
+ struct docg4_priv *doc = nand->priv;
+ int status = NAND_STATUS_WP; /* inverse logic?? */
+ MTDDEBUG(MTD_DEBUG_LEVEL3, "%s...\n", __func__);
+
+ /* report any previously unreported error */
+ if (doc->status) {
+ status |= doc->status;
+ doc->status = 0;
+ return status;
+ }
+
+ status |= poll_status(CONFIG_SYS_NAND_BASE);
+ return status;
+}
+
+int docg4_nand_init(struct mtd_info *mtd, struct nand_chip *nand, int devnum)
+{
+ uint16_t id1, id2;
+ struct docg4_priv *docg4;
+ int retval;
+
+ docg4 = kzalloc(sizeof(*docg4), GFP_KERNEL);
+ if (!docg4)
+ return -1;
+
+ mtd->priv = nand;
+ nand->priv = docg4;
+
+ /* These must be initialized here because the docg4 is non-standard
+ * and doesn't produce an id that the nand code can use to look up
+ * these values (nand_scan_ident() not called).
+ */
+ mtd->size = DOCG4_CHIP_SIZE;
+ mtd->name = "Msys_Diskonchip_G4";
+ mtd->writesize = DOCG4_PAGE_SIZE;
+ mtd->erasesize = DOCG4_BLOCK_SIZE;
+ mtd->oobsize = DOCG4_OOB_SIZE;
+
+ nand->IO_ADDR_R =
+ (void __iomem *)CONFIG_SYS_NAND_BASE + DOC_IOSPACE_DATA;
+ nand->IO_ADDR_W = nand->IO_ADDR_R;
+ nand->chipsize = DOCG4_CHIP_SIZE;
+ nand->chip_shift = DOCG4_CHIP_SHIFT;
+ nand->bbt_erase_shift = DOCG4_ERASE_SHIFT;
+ nand->phys_erase_shift = DOCG4_ERASE_SHIFT;
+ nand->chip_delay = 20;
+ nand->page_shift = DOCG4_PAGE_SHIFT;
+ nand->pagemask = 0x3ffff;
+ nand->badblockpos = NAND_LARGE_BADBLOCK_POS;
+ nand->badblockbits = 8;
+ nand->ecc.layout = &docg4_oobinfo;
+ nand->ecc.mode = NAND_ECC_HW_SYNDROME;
+ nand->ecc.size = DOCG4_PAGE_SIZE;
+ nand->ecc.prepad = 8;
+ nand->ecc.bytes = 8;
+ nand->options =
+ NAND_BUSWIDTH_16 | NAND_NO_SUBPAGE_WRITE | NAND_NO_AUTOINCR;
+ nand->controller = &nand->hwcontrol;
+
+ /* methods */
+ nand->cmdfunc = docg4_command;
+ nand->waitfunc = docg4_wait;
+ nand->select_chip = docg4_select_chip;
+ nand->read_byte = docg4_read_byte;
+ nand->block_markbad = docg4_block_markbad;
+ nand->read_buf = docg4_read_buf;
+ nand->write_buf = docg4_write_buf16;
+ nand->scan_bbt = nand_default_bbt;
+ nand->erase_cmd = docg4_erase_block;
+ nand->ecc.read_page = docg4_read_page;
+ nand->ecc.write_page = docg4_write_page;
+ nand->ecc.read_page_raw = docg4_read_page_raw;
+ nand->ecc.write_page_raw = docg4_write_page_raw;
+ nand->ecc.read_oob = docg4_read_oob;
+ nand->ecc.write_oob = docg4_write_oob;
+
+ /*
+ * The way the nand infrastructure code is written, a memory-based bbt
+ * is not created if NAND_SKIP_BBTSCAN is set. With no memory bbt,
+ * nand->block_bad() is used. So when ignoring bad blocks, we skip the
+ * scan and define a dummy block_bad() which always returns 0.
+ */
+ if (ignore_badblocks) {
+ nand->options |= NAND_SKIP_BBTSCAN;
+ nand->block_bad = docg4_block_neverbad;
+ }
+
+ reset(CONFIG_SYS_NAND_BASE);
+
+ /* check for presence of g4 chip by reading id registers */
+ id1 = readw(CONFIG_SYS_NAND_BASE + DOC_CHIPID);
+ id1 = readw(CONFIG_SYS_NAND_BASE + DOCG4_MYSTERY_REG);
+ id2 = readw(CONFIG_SYS_NAND_BASE + DOC_CHIPID_INV);
+ id2 = readw(CONFIG_SYS_NAND_BASE + DOCG4_MYSTERY_REG);
+ if (id1 != DOCG4_IDREG1_VALUE || id2 != DOCG4_IDREG2_VALUE)
+ return -1;
+
+ /* initialize bch algorithm */
+ docg4->bch = init_bch(DOCG4_M, DOCG4_T, DOCG4_PRIMITIVE_POLY);
+ if (docg4->bch == NULL)
+ return -1;
+
+ retval = nand_scan_tail(mtd);
+ if (retval)
+ return -1;
+
+ /*
+ * Scan for bad blocks and create bbt here, then add the factory-marked
+ * bad blocks to the bbt.
+ */
+ nand->scan_bbt(mtd);
+ nand->options |= NAND_BBT_SCANNED;
+ retval = read_factory_bbt(mtd);
+ if (retval)
+ return -1;
+
+ retval = nand_register(devnum);
+ if (retval)
+ return -1;
+
+ return 0;
+}
diff --git a/drivers/mtd/nand/docg4_spl.c b/drivers/mtd/nand/docg4_spl.c
new file mode 100644
index 0000000..95e856c
--- /dev/null
+++ b/drivers/mtd/nand/docg4_spl.c
@@ -0,0 +1,222 @@
+/*
+ * SPL driver for Diskonchip G4 nand flash
+ *
+ * Copyright (C) 2013 Mike Dunn <mikedunn@newsguy.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ *
+ *
+ * This driver basically mimics the load functionality of a typical IPL (initial
+ * program loader) resident in the 2k NOR-like region of the docg4 that is
+ * mapped to the reset vector. It allows the u-boot SPL to continue loading if
+ * the IPL loads a fixed number of flash blocks that is insufficient to contain
+ * the entire u-boot image. In this case, a concatenated spl + u-boot image is
+ * written at the flash offset from which the IPL loads an image, and when the
+ * IPL jumps to the SPL, the SPL resumes loading where the IPL left off. See
+ * the palmtreo680 for an example.
+ *
+ * This driver assumes that the data was written to the flash using the device's
+ * "reliable" mode, and also assumes that each 512 byte page is stored
+ * redundantly in the subsequent page. This storage format is likely to be used
+ * by all boards that boot from the docg4. The format compensates for the lack
+ * of ecc in the IPL.
+ *
+ * Reliable mode reduces the capacity of a block by half, and the redundant
+ * pages reduce it by half again. As a result, the normal 256k capacity of a
+ * block is reduced to 64k for the purposes of the IPL/SPL.
+ */
+
+#include <asm/io.h>
+#include <linux/mtd/docg4.h>
+
+/* forward declarations */
+static inline void write_nop(void __iomem *docptr);
+static int poll_status(void __iomem *docptr);
+static void write_addr(void __iomem *docptr, uint32_t docg4_addr);
+static void address_sequence(unsigned int g4_page, unsigned int g4_index,
+ void __iomem *docptr);
+static int docg4_load_block_reliable(uint32_t flash_offset, void *dest_addr);
+
+int nand_spl_load_image(uint32_t offs, unsigned int size, void *dst)
+{
+ void *load_addr = dst;
+ uint32_t flash_offset = offs;
+ const unsigned int block_count =
+ (size + DOCG4_BLOCK_CAPACITY_SPL - 1)
+ / DOCG4_BLOCK_CAPACITY_SPL;
+ int i;
+
+ for (i = 0; i < block_count; i++) {
+ int ret = docg4_load_block_reliable(flash_offset, load_addr);
+ if (ret)
+ return ret;
+ load_addr += DOCG4_BLOCK_CAPACITY_SPL;
+ flash_offset += DOCG4_BLOCK_SIZE;
+ }
+ return 0;
+}
+
+static inline void write_nop(void __iomem *docptr)
+{
+ writew(0, docptr + DOC_NOP);
+}
+
+static int poll_status(void __iomem *docptr)
+{
+ /*
+ * Busy-wait for the FLASHREADY bit to be set in the FLASHCONTROL
+ * register. Operations known to take a long time (e.g., block erase)
+ * should sleep for a while before calling this.
+ */
+
+ uint8_t flash_status;
+
+ /* hardware quirk requires reading twice initially */
+ flash_status = readb(docptr + DOC_FLASHCONTROL);
+
+ do {
+ flash_status = readb(docptr + DOC_FLASHCONTROL);
+ } while (!(flash_status & DOC_CTRL_FLASHREADY));
+
+ return 0;
+}
+
+static void write_addr(void __iomem *docptr, uint32_t docg4_addr)
+{
+ /* write the four address bytes packed in docg4_addr to the device */
+
+ writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS);
+ docg4_addr >>= 8;
+ writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS);
+ docg4_addr >>= 8;
+ writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS);
+ docg4_addr >>= 8;
+ writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS);
+}
+
+static void address_sequence(unsigned int g4_page, unsigned int g4_index,
+ void __iomem *docptr)
+{
+ writew(DOCG4_SEQ_PAGE_READ, docptr + DOC_FLASHSEQUENCE);
+ writew(DOCG4_CMD_PAGE_READ, docptr + DOC_FLASHCOMMAND);
+ write_nop(docptr);
+ write_addr(docptr, ((uint32_t)g4_page << 16) | g4_index);
+ write_nop(docptr);
+}
+
+static int docg4_load_block_reliable(uint32_t flash_offset, void *dest_addr)
+{
+ void __iomem *docptr = (void *)CONFIG_SYS_NAND_BASE;
+ unsigned int g4_page = flash_offset >> 11; /* 2k page */
+ const unsigned int last_g4_page = g4_page + 0x80; /* last in block */
+ int g4_index = 0;
+ uint16_t flash_status;
+ uint16_t *buf;
+ uint16_t discard, magic_high, magic_low;
+
+ /* flash_offset must be aligned to the start of a block */
+ if (flash_offset & 0x3ffff)
+ return -1;
+
+ writew(DOC_SEQ_RESET, docptr + DOC_FLASHSEQUENCE);
+ writew(DOC_CMD_RESET, docptr + DOC_FLASHCOMMAND);
+ write_nop(docptr);
+ write_nop(docptr);
+ poll_status(docptr);
+ write_nop(docptr);
+ writew(0x45, docptr + DOC_FLASHSEQUENCE);
+ writew(0xa3, docptr + DOC_FLASHCOMMAND);
+ write_nop(docptr);
+ writew(0x22, docptr + DOC_FLASHCOMMAND);
+ write_nop(docptr);
+
+ /* read 1st 4 oob bytes of first subpage of block */
+ address_sequence(g4_page, 0x0100, docptr); /* index at oob */
+ write_nop(docptr);
+ flash_status = readw(docptr + DOC_FLASHCONTROL);
+ flash_status = readw(docptr + DOC_FLASHCONTROL);
+ if (flash_status & 0x06) /* sequence or protection errors */
+ return -1;
+ writew(DOCG4_CMD_READ2, docptr + DOC_FLASHCOMMAND);
+ write_nop(docptr);
+ write_nop(docptr);
+ poll_status(docptr);
+ writew(DOC_ECCCONF0_READ_MODE | 4, docptr + DOC_ECCCONF0);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+
+ /*
+ * Here we read the first four oob bytes of the first page of the block.
+ * The IPL on the palmtreo680 requires that this contain a 32 bit magic
+ * number, or the load aborts. We'll ignore it.
+ */
+ discard = readw(docptr + 0x103c); /* hw quirk; 1st read discarded */
+ magic_low = readw(docptr + 0x103c);
+ magic_high = readw(docptr + DOCG4_MYSTERY_REG);
+ writew(0, docptr + DOC_DATAEND);
+ write_nop(docptr);
+ write_nop(docptr);
+
+ /* load contents of block to memory */
+ buf = (uint16_t *)dest_addr;
+ do {
+ int i;
+
+ address_sequence(g4_page, g4_index, docptr);
+ writew(DOCG4_CMD_READ2,
+ docptr + DOC_FLASHCOMMAND);
+ write_nop(docptr);
+ write_nop(docptr);
+ poll_status(docptr);
+ writew(DOC_ECCCONF0_READ_MODE |
+ DOC_ECCCONF0_ECC_ENABLE |
+ DOCG4_BCH_SIZE,
+ docptr + DOC_ECCCONF0);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+
+ /* read the 512 bytes of page data, 2 bytes at a time */
+ discard = readw(docptr + 0x103c);
+ for (i = 0; i < 256; i++)
+ *buf++ = readw(docptr + 0x103c);
+
+ /* read oob, but discard it */
+ for (i = 0; i < 7; i++)
+ discard = readw(docptr + 0x103c);
+ discard = readw(docptr + DOCG4_OOB_6_7);
+ discard = readw(docptr + DOCG4_OOB_6_7);
+
+ writew(0, docptr + DOC_DATAEND);
+ write_nop(docptr);
+ write_nop(docptr);
+
+ if (!(g4_index & 0x100)) {
+ /* not redundant subpage read; check for ecc error */
+ write_nop(docptr);
+ flash_status = readw(docptr + DOC_ECCCONF1);
+ flash_status = readw(docptr + DOC_ECCCONF1);
+ if (flash_status & 0x80) { /* ecc error */
+ g4_index += 0x108; /* read redundant subpage */
+ buf -= 256; /* back up ram ptr */
+ continue;
+ } else /* no ecc error */
+ g4_index += 0x210; /* skip redundant subpage */
+ } else /* redundant page was just read; skip ecc error check */
+ g4_index += 0x108;
+
+ if (g4_index == 0x420) { /* finished with 2k page */
+ g4_index = 0;
+ g4_page += 2; /* odd-numbered 2k pages skipped */
+ }
+
+ } while (g4_page != last_g4_page); /* while still on same block */
+
+ return 0;
+}
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 834a8a6..0fa776a 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -640,9 +640,8 @@
return fsl_elbc_read_byte(mtd);
}
-static int fsl_elbc_read_page(struct mtd_info *mtd,
- struct nand_chip *chip,
- uint8_t *buf, int page)
+static int fsl_elbc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
{
fsl_elbc_read_buf(mtd, buf, mtd->writesize);
fsl_elbc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -656,12 +655,13 @@
/* ECC will be calculated automatically, and errors will be detected in
* waitfunc.
*/
-static void fsl_elbc_write_page(struct mtd_info *mtd,
- struct nand_chip *chip,
- const uint8_t *buf)
+static int fsl_elbc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required)
{
fsl_elbc_write_buf(mtd, buf, mtd->writesize);
fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
}
static struct fsl_elbc_ctrl *elbc_ctrl;
@@ -747,8 +747,8 @@
nand->bbt_md = &bbt_mirror_descr;
/* set up nand options */
- nand->options = NAND_NO_READRDY | NAND_NO_AUTOINCR |
- NAND_USE_FLASH_BBT | NAND_NO_SUBPAGE_WRITE;
+ nand->options = NAND_NO_SUBPAGE_WRITE;
+ nand->bbt_options = NAND_BBT_USE_FLASH;
nand->controller = &elbc_ctrl->controller;
nand->priv = priv;
@@ -756,20 +756,8 @@
nand->ecc.read_page = fsl_elbc_read_page;
nand->ecc.write_page = fsl_elbc_write_page;
-#ifdef CONFIG_FSL_ELBC_FMR
- priv->fmr = CONFIG_FSL_ELBC_FMR;
-#else
priv->fmr = (15 << FMR_CWTO_SHIFT) | (2 << FMR_AL_SHIFT);
- /*
- * Hardware expects small page has ECCM0, large page has ECCM1
- * when booting from NAND. Board config can override if not
- * booting from NAND.
- */
- if (or & OR_FCM_PGS)
- priv->fmr |= FMR_ECCM;
-#endif
-
/* If CS Base Register selects full hardware ECC then use it */
if ((br & BR_DECC) == BR_DECC_CHK_GEN) {
nand->ecc.mode = NAND_ECC_HW;
@@ -781,16 +769,32 @@
nand->ecc.size = 512;
nand->ecc.bytes = 3;
nand->ecc.steps = 1;
+ nand->ecc.strength = 1;
} else {
/* otherwise fall back to default software ECC */
nand->ecc.mode = NAND_ECC_SOFT;
}
+ ret = nand_scan_ident(mtd, 1, NULL);
+ if (ret)
+ return ret;
+
/* Large-page-specific setup */
- if (or & OR_FCM_PGS) {
+ if (mtd->writesize == 2048) {
+ setbits_be32(&elbc_ctrl->regs->bank[priv->bank].or,
+ OR_FCM_PGS);
+ in_be32(&elbc_ctrl->regs->bank[priv->bank].or);
+
priv->page_size = 1;
nand->badblock_pattern = &largepage_memorybased;
+ /*
+ * Hardware expects small page has ECCM0, large page has
+ * ECCM1 when booting from NAND, and we follow that even
+ * when not booting from NAND.
+ */
+ priv->fmr |= FMR_ECCM;
+
/* adjust ecc setup if needed */
if ((br & BR_DECC) == BR_DECC_CHK_GEN) {
nand->ecc.steps = 4;
@@ -798,12 +802,14 @@
&fsl_elbc_oob_lp_eccm1 :
&fsl_elbc_oob_lp_eccm0;
}
+ } else if (mtd->writesize == 512) {
+ clrbits_be32(&elbc_ctrl->regs->bank[priv->bank].or,
+ OR_FCM_PGS);
+ in_be32(&elbc_ctrl->regs->bank[priv->bank].or);
+ } else {
+ return -ENODEV;
}
- ret = nand_scan_ident(mtd, 1, NULL);
- if (ret)
- return ret;
-
ret = nand_scan_tail(mtd);
if (ret)
return ret;
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index b13d8a9..439822c 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -21,6 +21,7 @@
#include <common.h>
#include <malloc.h>
+#include <nand.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
@@ -41,7 +42,6 @@
/* mtd information per set */
struct fsl_ifc_mtd {
- struct mtd_info mtd;
struct nand_chip chip;
struct fsl_ifc_ctrl *ctrl;
@@ -686,9 +686,8 @@
return nand_fsr;
}
-static int fsl_ifc_read_page(struct mtd_info *mtd,
- struct nand_chip *chip,
- uint8_t *buf, int page)
+static int fsl_ifc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
{
struct fsl_ifc_mtd *priv = chip->priv;
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
@@ -705,12 +704,13 @@
/* ECC will be calculated automatically, and errors will be detected in
* waitfunc.
*/
-static void fsl_ifc_write_page(struct mtd_info *mtd,
- struct nand_chip *chip,
- const uint8_t *buf)
+static int fsl_ifc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required)
{
fsl_ifc_write_buf(mtd, buf, mtd->writesize);
fsl_ifc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
}
static void fsl_ifc_ctrl_init(void)
@@ -794,11 +794,14 @@
out_be32(&ifc_ctrl->regs->csor_cs[cs].csor_ext, csor_ext);
}
-int board_nand_init(struct nand_chip *nand)
+static int fsl_ifc_chip_init(int devnum, u8 *addr)
{
+ struct mtd_info *mtd = &nand_info[devnum];
+ struct nand_chip *nand;
struct fsl_ifc_mtd *priv;
struct nand_ecclayout *layout;
uint32_t cspr = 0, csor = 0, ver = 0;
+ int ret;
if (!ifc_ctrl) {
fsl_ifc_ctrl_init();
@@ -811,18 +814,18 @@
return -ENOMEM;
priv->ctrl = ifc_ctrl;
- priv->vbase = nand->IO_ADDR_R;
+ priv->vbase = addr;
/* Find which chip select it is connected to.
*/
for (priv->bank = 0; priv->bank < MAX_BANKS; priv->bank++) {
- phys_addr_t base_addr = virt_to_phys(nand->IO_ADDR_R);
+ phys_addr_t phys_addr = virt_to_phys(addr);
cspr = in_be32(&ifc_ctrl->regs->cspr_cs[priv->bank].cspr);
csor = in_be32(&ifc_ctrl->regs->csor_cs[priv->bank].csor);
if ((cspr & CSPR_V) && (cspr & CSPR_MSEL) == CSPR_MSEL_NAND &&
- (cspr & CSPR_BA) == CSPR_PHYS_ADDR(base_addr)) {
+ (cspr & CSPR_BA) == CSPR_PHYS_ADDR(phys_addr)) {
ifc_ctrl->cs_nand = priv->bank << IFC_NAND_CSEL_SHIFT;
break;
}
@@ -835,6 +838,9 @@
return -ENODEV;
}
+ nand = &priv->chip;
+ mtd->priv = nand;
+
ifc_ctrl->chips[priv->bank] = priv;
/* fill in nand_chip structure */
@@ -852,8 +858,8 @@
nand->bbt_md = &bbt_mirror_descr;
/* set up nand options */
- nand->options = NAND_NO_READRDY | NAND_NO_AUTOINCR |
- NAND_USE_FLASH_BBT | NAND_NO_SUBPAGE_WRITE;
+ nand->options = NAND_NO_SUBPAGE_WRITE;
+ nand->bbt_options = NAND_BBT_USE_FLASH;
if (cspr & CSPR_PORT_SIZE_16) {
nand->read_byte = fsl_ifc_read_byte16;
@@ -884,11 +890,13 @@
bbt_mirror_descr.offs = 0;
}
+ nand->ecc.strength = 4;
priv->bufnum_mask = 15;
break;
case CSOR_NAND_PGS_2K:
layout = &oob_2048_ecc4;
+ nand->ecc.strength = 4;
priv->bufnum_mask = 3;
break;
@@ -896,8 +904,10 @@
if ((csor & CSOR_NAND_ECC_MODE_MASK) ==
CSOR_NAND_ECC_MODE_4) {
layout = &oob_4096_ecc4;
+ nand->ecc.strength = 4;
} else {
layout = &oob_4096_ecc8;
+ nand->ecc.strength = 8;
nand->ecc.bytes = 16;
}
@@ -921,5 +931,31 @@
if (ver == FSL_IFC_V1_1_0)
fsl_ifc_sram_init();
+ ret = nand_scan_ident(mtd, 1, NULL);
+ if (ret)
+ return ret;
+
+ ret = nand_scan_tail(mtd);
+ if (ret)
+ return ret;
+
+ ret = nand_register(devnum);
+ if (ret)
+ return ret;
return 0;
}
+
+#ifndef CONFIG_SYS_NAND_BASE_LIST
+#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
+#endif
+
+static unsigned long base_address[CONFIG_SYS_MAX_NAND_DEVICE] =
+ CONFIG_SYS_NAND_BASE_LIST;
+
+void board_nand_init(void)
+{
+ int i;
+
+ for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+ fsl_ifc_chip_init(i, (u8 *)base_address[i]);
+}
diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
index 7a61d88..fab2aeb 100644
--- a/drivers/mtd/nand/fsmc_nand.c
+++ b/drivers/mtd/nand/fsmc_nand.c
@@ -341,6 +341,7 @@
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @oob_required: caller expects OOB data read to chip->oob_poi
* @page: page number to read
*
* This routine is needed for fsmc verison 8 as reading from NAND chip has to be
@@ -350,7 +351,7 @@
* max of 8 bits)
*/
static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int page)
+ uint8_t *buf, int oob_required, int page)
{
struct fsmc_eccplace *fsmc_eccpl;
int i, j, s, stat, eccsize = chip->ecc.size;
@@ -452,6 +453,7 @@
switch (fsmc_version) {
case FSMC_VER8:
nand->ecc.bytes = 13;
+ nand->ecc.strength = 8;
nand->ecc.correct = fsmc_bch8_correct_data;
nand->ecc.read_page = fsmc_read_page_hwecc;
if (mtd->writesize == 512)
@@ -466,6 +468,7 @@
break;
default:
nand->ecc.bytes = 3;
+ nand->ecc.strength = 1;
nand->ecc.layout = &fsmc_ecc1_layout;
nand->ecc.correct = nand_correct_data;
break;
diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c
index 3ec34f3..a691fbc 100644
--- a/drivers/mtd/nand/jz4740_nand.c
+++ b/drivers/mtd/nand/jz4740_nand.c
@@ -253,6 +253,7 @@
nand->ecc.mode = NAND_ECC_HW_OOB_FIRST;
nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE;
nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES;
+ nand->ecc.strength = 4;
nand->ecc.layout = &qi_lb60_ecclayout_2gb;
nand->chip_delay = 50;
nand->options = NAND_USE_FLASH_BBT;
diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c
index e6b7a70..e53f341 100644
--- a/drivers/mtd/nand/mpc5121_nfc.c
+++ b/drivers/mtd/nand/mpc5121_nfc.c
@@ -621,7 +621,7 @@
chip->write_buf = mpc5121_nfc_write_buf;
chip->verify_buf = mpc5121_nfc_verify_buf;
chip->select_chip = mpc5121_nfc_select_chip;
- chip->options = NAND_NO_AUTOINCR | NAND_USE_FLASH_BBT;
+ chip->bbt_options = NAND_BBT_USE_FLASH;
chip->ecc.mode = NAND_ECC_SOFT;
/* Reset NAND Flash controller */
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index eeba521..ac435f2 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -396,7 +396,7 @@
#if defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2)
static int mxc_nand_read_oob_syndrome(struct mtd_info *mtd,
struct nand_chip *chip,
- int page, int sndcmd)
+ int page)
{
struct mxc_nand_host *host = chip->priv;
uint8_t *buf = chip->oob_poi;
@@ -450,6 +450,7 @@
static int mxc_nand_read_page_raw_syndrome(struct mtd_info *mtd,
struct nand_chip *chip,
uint8_t *buf,
+ int oob_required,
int page)
{
struct mxc_nand_host *host = chip->priv;
@@ -494,6 +495,7 @@
static int mxc_nand_read_page_syndrome(struct mtd_info *mtd,
struct nand_chip *chip,
uint8_t *buf,
+ int oob_required,
int page)
{
struct mxc_nand_host *host = chip->priv;
@@ -583,9 +585,10 @@
return status & NAND_STATUS_FAIL ? -EIO : 0;
}
-static void mxc_nand_write_page_raw_syndrome(struct mtd_info *mtd,
+static int mxc_nand_write_page_raw_syndrome(struct mtd_info *mtd,
struct nand_chip *chip,
- const uint8_t *buf)
+ const uint8_t *buf,
+ int oob_required)
{
struct mxc_nand_host *host = chip->priv;
int eccsize = chip->ecc.size;
@@ -619,11 +622,13 @@
size = mtd->oobsize - (oob - chip->oob_poi);
if (size)
chip->write_buf(mtd, oob, size);
+ return 0;
}
-static void mxc_nand_write_page_syndrome(struct mtd_info *mtd,
+static int mxc_nand_write_page_syndrome(struct mtd_info *mtd,
struct nand_chip *chip,
- const uint8_t *buf)
+ const uint8_t *buf,
+ int oob_required)
{
struct mxc_nand_host *host = chip->priv;
int i, n, eccsize = chip->ecc.size;
@@ -662,6 +667,7 @@
i = mtd->oobsize - (oob - chip->oob_poi);
if (i)
chip->write_buf(mtd, oob, i);
+ return 0;
}
static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat,
@@ -1188,7 +1194,7 @@
#endif
#ifdef CONFIG_SYS_NAND_USE_FLASH_BBT
- this->options |= NAND_USE_FLASH_BBT;
+ this->bbt_options |= NAND_BBT_USE_FLASH;
this->bbt_td = &bbt_main_descr;
this->bbt_md = &bbt_mirror_descr;
#endif
@@ -1236,6 +1242,13 @@
this->ecc.mode = NAND_ECC_HW;
}
+ if (this->ecc.mode == NAND_ECC_HW) {
+ if (is_mxc_nfc_1())
+ this->ecc.strength = 1;
+ else
+ this->ecc.strength = 4;
+ }
+
host->pagesize_2k = 0;
this->ecc.size = 512;
diff --git a/drivers/mtd/nand/mxc_nand_spl.c b/drivers/mtd/nand/mxc_nand_spl.c
index edc589e..ba725e9 100644
--- a/drivers/mtd/nand/mxc_nand_spl.c
+++ b/drivers/mtd/nand/mxc_nand_spl.c
@@ -290,7 +290,7 @@
return 0;
}
-static int nand_load(unsigned int from, unsigned int size, unsigned char *buf)
+int nand_spl_load_image(uint32_t from, unsigned int size, void *buf)
{
int i;
unsigned int page;
@@ -303,6 +303,7 @@
page = from / CONFIG_SYS_NAND_PAGE_SIZE;
i = 0;
+ size = roundup(size, CONFIG_SYS_NAND_PAGE_SIZE);
while (i < size / CONFIG_SYS_NAND_PAGE_SIZE) {
if (nfc_read_page(page, buf) < 0)
return -1;
@@ -332,6 +333,7 @@
return 0;
}
+#ifndef CONFIG_SPL_FRAMEWORK
/*
* The main entry for NAND booting. It's necessary that SDRAM is already
* configured and available since this code loads the main U-Boot image
@@ -345,8 +347,9 @@
* CONFIG_SYS_NAND_U_BOOT_OFFS and CONFIG_SYS_NAND_U_BOOT_SIZE must
* be aligned to full pages
*/
- if (!nand_load(CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE,
- (uchar *)CONFIG_SYS_NAND_U_BOOT_DST)) {
+ if (!nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS,
+ CONFIG_SYS_NAND_U_BOOT_SIZE,
+ (uchar *)CONFIG_SYS_NAND_U_BOOT_DST)) {
/* Copy from NAND successful, start U-boot */
uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
uboot();
@@ -355,3 +358,7 @@
hang();
}
}
+#endif
+
+void nand_init(void) {}
+void nand_deselect(void) {}
diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c
index e38e151..866cabd 100644
--- a/drivers/mtd/nand/mxs_nand.c
+++ b/drivers/mtd/nand/mxs_nand.c
@@ -34,12 +34,19 @@
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
+#include <asm/imx-common/regs-bch.h>
+#include <asm/imx-common/regs-gpmi.h>
#include <asm/arch/sys_proto.h>
-#include <asm/arch/dma.h>
+#include <asm/imx-common/dma.h>
#define MXS_NAND_DMA_DESCRIPTOR_COUNT 4
#define MXS_NAND_CHUNK_DATA_CHUNK_SIZE 512
+#if defined(CONFIG_MX6)
+#define MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT 2
+#else
+#define MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT 0
+#endif
#define MXS_NAND_METADATA_SIZE 10
#define MXS_NAND_COMMAND_BUFFER_SIZE 32
@@ -546,7 +553,8 @@
* Read a page from NAND.
*/
static int mxs_nand_ecc_read_page(struct mtd_info *mtd, struct nand_chip *nand,
- uint8_t *buf, int page)
+ uint8_t *buf, int oob_required,
+ int page)
{
struct mxs_nand_info *nand_info = nand->priv;
struct mxs_dma_desc *d;
@@ -691,8 +699,9 @@
/*
* Write a page to NAND.
*/
-static void mxs_nand_ecc_write_page(struct mtd_info *mtd,
- struct nand_chip *nand, const uint8_t *buf)
+static int mxs_nand_ecc_write_page(struct mtd_info *mtd,
+ struct nand_chip *nand, const uint8_t *buf,
+ int oob_required)
{
struct mxs_nand_info *nand_info = nand->priv;
struct mxs_dma_desc *d;
@@ -748,6 +757,7 @@
rtn:
mxs_nand_return_dma_descs(nand_info);
+ return 0;
}
/*
@@ -763,7 +773,7 @@
struct mxs_nand_info *nand_info = chip->priv;
int ret;
- if (ops->mode == MTD_OOB_RAW)
+ if (ops->mode == MTD_OPS_RAW)
nand_info->raw_oob_mode = 1;
else
nand_info->raw_oob_mode = 0;
@@ -788,7 +798,7 @@
struct mxs_nand_info *nand_info = chip->priv;
int ret;
- if (ops->mode == MTD_OOB_RAW)
+ if (ops->mode == MTD_OPS_RAW)
nand_info->raw_oob_mode = 1;
else
nand_info->raw_oob_mode = 0;
@@ -866,7 +876,7 @@
* what to do.
*/
static int mxs_nand_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *nand,
- int page, int cmd)
+ int page)
{
struct mxs_nand_info *nand_info = nand->priv;
@@ -980,14 +990,16 @@
tmp |= MXS_NAND_METADATA_SIZE << BCH_FLASHLAYOUT0_META_SIZE_OFFSET;
tmp |= (mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize) >> 1)
<< BCH_FLASHLAYOUT0_ECC0_OFFSET;
- tmp |= MXS_NAND_CHUNK_DATA_CHUNK_SIZE;
+ tmp |= MXS_NAND_CHUNK_DATA_CHUNK_SIZE
+ >> MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT;
writel(tmp, &bch_regs->hw_bch_flash0layout0);
tmp = (mtd->writesize + mtd->oobsize)
<< BCH_FLASHLAYOUT1_PAGE_SIZE_OFFSET;
tmp |= (mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize) >> 1)
<< BCH_FLASHLAYOUT1_ECCN_OFFSET;
- tmp |= MXS_NAND_CHUNK_DATA_CHUNK_SIZE;
+ tmp |= MXS_NAND_CHUNK_DATA_CHUNK_SIZE
+ >> MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT;
writel(tmp, &bch_regs->hw_bch_flash0layout1);
/* Set *all* chip selects to use layout 0 */
@@ -997,19 +1009,19 @@
writel(BCH_CTRL_COMPLETE_IRQ_EN, &bch_regs->hw_bch_ctrl_set);
/* Hook some operations at the MTD level. */
- if (mtd->read_oob != mxs_nand_hook_read_oob) {
- nand_info->hooked_read_oob = mtd->read_oob;
- mtd->read_oob = mxs_nand_hook_read_oob;
+ if (mtd->_read_oob != mxs_nand_hook_read_oob) {
+ nand_info->hooked_read_oob = mtd->_read_oob;
+ mtd->_read_oob = mxs_nand_hook_read_oob;
}
- if (mtd->write_oob != mxs_nand_hook_write_oob) {
- nand_info->hooked_write_oob = mtd->write_oob;
- mtd->write_oob = mxs_nand_hook_write_oob;
+ if (mtd->_write_oob != mxs_nand_hook_write_oob) {
+ nand_info->hooked_write_oob = mtd->_write_oob;
+ mtd->_write_oob = mxs_nand_hook_write_oob;
}
- if (mtd->block_markbad != mxs_nand_hook_block_markbad) {
- nand_info->hooked_block_markbad = mtd->block_markbad;
- mtd->block_markbad = mxs_nand_hook_block_markbad;
+ if (mtd->_block_markbad != mxs_nand_hook_block_markbad) {
+ nand_info->hooked_block_markbad = mtd->_block_markbad;
+ mtd->_block_markbad = mxs_nand_hook_block_markbad;
}
/* We use the reference implementation for bad block management. */
@@ -1163,6 +1175,7 @@
nand->ecc.mode = NAND_ECC_HW;
nand->ecc.bytes = 9;
nand->ecc.size = 512;
+ nand->ecc.strength = 8;
return 0;
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index a2d06be..9e05cef 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -21,7 +21,7 @@
* TODO:
* Enable cached programming for 2k page size chips
* Check, if mtd->ecctype should be set to MTD_ECC_HW
- * if we have HW ecc support.
+ * if we have HW ECC support.
* The AG-AND chips have nice features for speed improvement,
* which are not supported yet. Read / program 4 pages in one go.
* BBT table is not serialized, has to be fixed
@@ -134,21 +134,14 @@
ret = -EINVAL;
}
- /* Do not allow past end of device */
- if (ofs + len > mtd->size) {
- MTDDEBUG(MTD_DEBUG_LEVEL0, "%s: Past end of device\n",
- __func__);
- ret = -EINVAL;
- }
-
return ret;
}
/**
* nand_release_device - [GENERIC] release chip
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*
- * Deselect, release chip lock and wake up anyone waiting on the device
+ * Deselect, release chip lock and wake up anyone waiting on the device.
*/
static void nand_release_device(struct mtd_info *mtd)
{
@@ -160,9 +153,9 @@
/**
* nand_read_byte - [DEFAULT] read one byte from the chip
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*
- * Default read function for 8bit buswith
+ * Default read function for 8bit buswidth.
*/
uint8_t nand_read_byte(struct mtd_info *mtd)
{
@@ -172,10 +165,11 @@
/**
* nand_read_byte16 - [DEFAULT] read one byte endianess aware from the chip
- * @mtd: MTD device structure
+ * nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip
+ * @mtd: MTD device structure
*
- * Default read function for 16bit buswith with
- * endianess conversion
+ * Default read function for 16bit buswidth with endianness conversion.
+ *
*/
static uint8_t nand_read_byte16(struct mtd_info *mtd)
{
@@ -185,10 +179,9 @@
/**
* nand_read_word - [DEFAULT] read one word from the chip
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*
- * Default read function for 16bit buswith without
- * endianess conversion
+ * Default read function for 16bit buswidth without endianness conversion.
*/
static u16 nand_read_word(struct mtd_info *mtd)
{
@@ -198,8 +191,8 @@
/**
* nand_select_chip - [DEFAULT] control CE line
- * @mtd: MTD device structure
- * @chipnr: chipnumber to select, -1 for deselect
+ * @mtd: MTD device structure
+ * @chipnr: chipnumber to select, -1 for deselect
*
* Default select function for 1 chip devices.
*/
@@ -221,11 +214,11 @@
/**
* nand_write_buf - [DEFAULT] write buffer to chip
- * @mtd: MTD device structure
- * @buf: data buffer
- * @len: number of bytes to write
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
*
- * Default write function for 8bit buswith
+ * Default write function for 8bit buswidth.
*/
void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
{
@@ -238,11 +231,11 @@
/**
* nand_read_buf - [DEFAULT] read chip data into buffer
- * @mtd: MTD device structure
- * @buf: buffer to store date
- * @len: number of bytes to read
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
*
- * Default read function for 8bit buswith
+ * Default read function for 8bit buswidth.
*/
void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
{
@@ -255,11 +248,11 @@
/**
* nand_verify_buf - [DEFAULT] Verify chip data against buffer
- * @mtd: MTD device structure
- * @buf: buffer containing the data to compare
- * @len: number of bytes to compare
+ * @mtd: MTD device structure
+ * @buf: buffer containing the data to compare
+ * @len: number of bytes to compare
*
- * Default verify function for 8bit buswith
+ * Default verify function for 8bit buswidth.
*/
static int nand_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
{
@@ -274,11 +267,11 @@
/**
* nand_write_buf16 - [DEFAULT] write buffer to chip
- * @mtd: MTD device structure
- * @buf: data buffer
- * @len: number of bytes to write
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
*
- * Default write function for 16bit buswith
+ * Default write function for 16bit buswidth.
*/
void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
{
@@ -294,11 +287,11 @@
/**
* nand_read_buf16 - [DEFAULT] read chip data into buffer
- * @mtd: MTD device structure
- * @buf: buffer to store date
- * @len: number of bytes to read
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
*
- * Default read function for 16bit buswith
+ * Default read function for 16bit buswidth.
*/
void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
{
@@ -313,11 +306,11 @@
/**
* nand_verify_buf16 - [DEFAULT] Verify chip data against buffer
- * @mtd: MTD device structure
- * @buf: buffer containing the data to compare
- * @len: number of bytes to compare
+ * @mtd: MTD device structure
+ * @buf: buffer containing the data to compare
+ * @len: number of bytes to compare
*
- * Default verify function for 16bit buswith
+ * Default verify function for 16bit buswidth.
*/
static int nand_verify_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
{
@@ -335,19 +328,19 @@
/**
* nand_block_bad - [DEFAULT] Read bad block marker from the chip
- * @mtd: MTD device structure
- * @ofs: offset from device start
- * @getchip: 0, if the chip is already selected
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+ * @getchip: 0, if the chip is already selected
*
* Check, if the block is bad.
*/
static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
{
- int page, chipnr, res = 0;
+ int page, chipnr, res = 0, i = 0;
struct nand_chip *chip = mtd->priv;
u16 bad;
- if (chip->options & NAND_BBT_SCANLASTPAGE)
+ if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
ofs += mtd->erasesize - mtd->writesize;
page = (int)(ofs >> chip->page_shift) & chip->pagemask;
@@ -361,23 +354,29 @@
chip->select_chip(mtd, chipnr);
}
- if (chip->options & NAND_BUSWIDTH_16) {
- chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos & 0xFE,
- page);
- bad = cpu_to_le16(chip->read_word(mtd));
- if (chip->badblockpos & 0x1)
- bad >>= 8;
- else
- bad &= 0xFF;
- } else {
- chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos, page);
- bad = chip->read_byte(mtd);
- }
+ do {
+ if (chip->options & NAND_BUSWIDTH_16) {
+ chip->cmdfunc(mtd, NAND_CMD_READOOB,
+ chip->badblockpos & 0xFE, page);
+ bad = cpu_to_le16(chip->read_word(mtd));
+ if (chip->badblockpos & 0x1)
+ bad >>= 8;
+ else
+ bad &= 0xFF;
+ } else {
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos,
+ page);
+ bad = chip->read_byte(mtd);
+ }
- if (likely(chip->badblockbits == 8))
- res = bad != 0xFF;
- else
- res = hweight8(bad) < chip->badblockbits;
+ if (likely(chip->badblockbits == 8))
+ res = bad != 0xFF;
+ else
+ res = hweight8(bad) < chip->badblockbits;
+ ofs += mtd->writesize;
+ page = (int)(ofs >> chip->page_shift) & chip->pagemask;
+ i++;
+ } while (!res && i < 2 && (chip->bbt_options & NAND_BBT_SCAN2NDPAGE));
if (getchip)
nand_release_device(mtd);
@@ -387,57 +386,83 @@
/**
* nand_default_block_markbad - [DEFAULT] mark a block bad
- * @mtd: MTD device structure
- * @ofs: offset from device start
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
*
- * This is the default implementation, which can be overridden by
- * a hardware specific driver.
+ * This is the default implementation, which can be overridden by a hardware
+ * specific driver. We try operations in the following order, according to our
+ * bbt_options (NAND_BBT_NO_OOB_BBM and NAND_BBT_USE_FLASH):
+ * (1) erase the affected block, to allow OOB marker to be written cleanly
+ * (2) update in-memory BBT
+ * (3) write bad block marker to OOB area of affected block
+ * (4) update flash-based BBT
+ * Note that we retain the first error encountered in (3) or (4), finish the
+ * procedures, and dump the error in the end.
*/
static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
{
struct nand_chip *chip = mtd->priv;
uint8_t buf[2] = { 0, 0 };
- int block, ret, i = 0;
+ int block, res, ret = 0, i = 0;
+ int write_oob = !(chip->bbt_options & NAND_BBT_NO_OOB_BBM);
- if (chip->options & NAND_BBT_SCANLASTPAGE)
- ofs += mtd->erasesize - mtd->writesize;
+ if (write_oob) {
+ struct erase_info einfo;
+
+ /* Attempt erase before marking OOB */
+ memset(&einfo, 0, sizeof(einfo));
+ einfo.mtd = mtd;
+ einfo.addr = ofs;
+ einfo.len = 1 << chip->phys_erase_shift;
+ nand_erase_nand(mtd, &einfo, 0);
+ }
/* Get block number */
block = (int)(ofs >> chip->bbt_erase_shift);
+ /* Mark block bad in memory-based BBT */
if (chip->bbt)
chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
- /* Do we have a flash based bad block table ? */
- if (chip->options & NAND_USE_FLASH_BBT)
- ret = nand_update_bbt(mtd, ofs);
- else {
+ /* Write bad block marker to OOB */
+ if (write_oob) {
+ struct mtd_oob_ops ops;
+ loff_t wr_ofs = ofs;
+
nand_get_device(chip, mtd, FL_WRITING);
- /* Write to first two pages and to byte 1 and 6 if necessary.
- * If we write to more than one location, the first error
- * encountered quits the procedure. We write two bytes per
- * location, so we dont have to mess with 16 bit access.
- */
+ ops.datbuf = NULL;
+ ops.oobbuf = buf;
+ ops.ooboffs = chip->badblockpos;
+ if (chip->options & NAND_BUSWIDTH_16) {
+ ops.ooboffs &= ~0x01;
+ ops.len = ops.ooblen = 2;
+ } else {
+ ops.len = ops.ooblen = 1;
+ }
+ ops.mode = MTD_OPS_PLACE_OOB;
+
+ /* Write to first/last page(s) if necessary */
+ if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
+ wr_ofs += mtd->erasesize - mtd->writesize;
do {
- chip->ops.len = chip->ops.ooblen = 2;
- chip->ops.datbuf = NULL;
- chip->ops.oobbuf = buf;
- chip->ops.ooboffs = chip->badblockpos & ~0x01;
+ res = nand_do_write_oob(mtd, wr_ofs, &ops);
+ if (!ret)
+ ret = res;
- ret = nand_do_write_oob(mtd, ofs, &chip->ops);
-
- if (!ret && (chip->options & NAND_BBT_SCANBYTE1AND6)) {
- chip->ops.ooboffs = NAND_SMALL_BADBLOCK_POS
- & ~0x01;
- ret = nand_do_write_oob(mtd, ofs, &chip->ops);
- }
i++;
- ofs += mtd->writesize;
- } while (!ret && (chip->options & NAND_BBT_SCAN2NDPAGE) &&
- i < 2);
+ wr_ofs += mtd->writesize;
+ } while ((chip->bbt_options & NAND_BBT_SCAN2NDPAGE) && i < 2);
nand_release_device(mtd);
}
+
+ /* Update flash-based bad block table */
+ if (chip->bbt_options & NAND_BBT_USE_FLASH) {
+ res = nand_update_bbt(mtd, ofs);
+ if (!ret)
+ ret = res;
+ }
+
if (!ret)
mtd->ecc_stats.badblocks++;
@@ -446,16 +471,16 @@
/**
* nand_check_wp - [GENERIC] check if the chip is write protected
- * @mtd: MTD device structure
- * Check, if the device is write protected
+ * @mtd: MTD device structure
*
- * The function expects, that the device is already selected
+ * Check, if the device is write protected. The function expects, that the
+ * device is already selected.
*/
static int nand_check_wp(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
- /* broken xD cards report WP despite being writable */
+ /* Broken xD cards report WP despite being writable */
if (chip->options & NAND_BROKEN_XD)
return 0;
@@ -466,10 +491,10 @@
/**
* nand_block_checkbad - [GENERIC] Check if a block is marked bad
- * @mtd: MTD device structure
- * @ofs: offset from device start
- * @getchip: 0, if the chip is already selected
- * @allowbbt: 1, if its allowed to access the bbt area
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+ * @getchip: 0, if the chip is already selected
+ * @allowbbt: 1, if its allowed to access the bbt area
*
* Check, if the block is bad. Either by reading the bad block table or
* calling of the scan function.
@@ -491,10 +516,7 @@
return nand_isbad_bbt(mtd, ofs, allowbbt);
}
-/*
- * Wait for the ready pin, after a command
- * The timeout is catched later.
- */
+/* Wait for the ready pin, after a command. The timeout is caught later. */
void nand_wait_ready(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
@@ -503,7 +525,7 @@
time_start = get_timer(0);
- /* wait until command is processed or timeout occures */
+ /* Wait until command is processed or timeout occurs */
while (get_timer(time_start) < timeo) {
if (chip->dev_ready)
if (chip->dev_ready(mtd))
@@ -513,13 +535,13 @@
/**
* nand_command - [DEFAULT] Send command to NAND device
- * @mtd: MTD device structure
- * @command: the command to be sent
- * @column: the column address for this command, -1 if none
- * @page_addr: the page address for this command, -1 if none
+ * @mtd: MTD device structure
+ * @command: the command to be sent
+ * @column: the column address for this command, -1 if none
+ * @page_addr: the page address for this command, -1 if none
*
- * Send command to NAND device. This function is used for small page
- * devices (256/512 Bytes per page)
+ * Send command to NAND device. This function is used for small page devices
+ * (256/512 Bytes per page).
*/
static void nand_command(struct mtd_info *mtd, unsigned int command,
int column, int page_addr)
@@ -528,9 +550,7 @@
int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE;
uint32_t rst_sts_cnt = CONFIG_SYS_NAND_RESET_CNT;
- /*
- * Write out the command to the device.
- */
+ /* Write out the command to the device */
if (command == NAND_CMD_SEQIN) {
int readcmd;
@@ -550,9 +570,7 @@
}
chip->cmd_ctrl(mtd, command, ctrl);
- /*
- * Address cycle, when necessary
- */
+ /* Address cycle, when necessary */
ctrl = NAND_CTRL_ALE | NAND_CTRL_CHANGE;
/* Serially input address */
if (column != -1) {
@@ -573,8 +591,8 @@
chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
/*
- * program and erase have their own busy handlers
- * status and sequential in needs no delay
+ * Program and erase have their own busy handlers status and sequential
+ * in needs no delay
*/
switch (command) {
@@ -608,8 +626,10 @@
return;
}
}
- /* Apply this short delay always to ensure that we do wait tWB in
- * any case on any machine. */
+ /*
+ * Apply this short delay always to ensure that we do wait tWB in
+ * any case on any machine.
+ */
ndelay(100);
nand_wait_ready(mtd);
@@ -617,14 +637,14 @@
/**
* nand_command_lp - [DEFAULT] Send command to NAND large page device
- * @mtd: MTD device structure
- * @command: the command to be sent
- * @column: the column address for this command, -1 if none
- * @page_addr: the page address for this command, -1 if none
+ * @mtd: MTD device structure
+ * @command: the command to be sent
+ * @column: the column address for this command, -1 if none
+ * @page_addr: the page address for this command, -1 if none
*
* Send command to NAND device. This is the version for the new large page
- * devices We dont have the separate regions as we have in the small page
- * devices. We must emulate NAND_CMD_READOOB to keep the code compatible.
+ * devices. We don't have the separate regions as we have in the small page
+ * devices. We must emulate NAND_CMD_READOOB to keep the code compatible.
*/
static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
int column, int page_addr)
@@ -667,8 +687,8 @@
chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
/*
- * program and erase have their own busy handlers
- * status, sequential in, and deplete1 need no delay
+ * Program and erase have their own busy handlers status, sequential
+ * in, and deplete1 need no delay.
*/
switch (command) {
@@ -682,14 +702,12 @@
case NAND_CMD_DEPLETE1:
return;
- /*
- * read error status commands require only a short delay
- */
case NAND_CMD_STATUS_ERROR:
case NAND_CMD_STATUS_ERROR0:
case NAND_CMD_STATUS_ERROR1:
case NAND_CMD_STATUS_ERROR2:
case NAND_CMD_STATUS_ERROR3:
+ /* Read error status commands require only a short delay */
udelay(chip->chip_delay);
return;
@@ -723,7 +741,7 @@
default:
/*
* If we don't have access to the busy pin, we apply the given
- * command delay
+ * command delay.
*/
if (!chip->dev_ready) {
udelay(chip->chip_delay);
@@ -731,8 +749,10 @@
}
}
- /* Apply this short delay always to ensure that we do wait tWB in
- * any case on any machine. */
+ /*
+ * Apply this short delay always to ensure that we do wait tWB in
+ * any case on any machine.
+ */
ndelay(100);
nand_wait_ready(mtd);
@@ -740,9 +760,9 @@
/**
* nand_get_device - [GENERIC] Get chip for selected access
- * @chip: the nand chip descriptor
- * @mtd: MTD device structure
- * @new_state: the state which is requested
+ * @chip: the nand chip descriptor
+ * @mtd: MTD device structure
+ * @new_state: the state which is requested
*
* Get the device and lock it for exclusive access
*/
@@ -754,13 +774,13 @@
}
/**
- * nand_wait - [DEFAULT] wait until the command is done
- * @mtd: MTD device structure
- * @chip: NAND chip structure
+ * nand_wait - [DEFAULT] wait until the command is done
+ * @mtd: MTD device structure
+ * @chip: NAND chip structure
*
- * Wait for command done. This applies to erase and program only
- * Erase can take up to 400ms and program up to 20ms according to
- * general NAND and SmartMedia specs
+ * Wait for command done. This applies to erase and program only. Erase can
+ * take up to 400ms and program up to 20ms according to general NAND and
+ * SmartMedia specs.
*/
static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
{
@@ -804,34 +824,37 @@
}
/**
- * nand_read_page_raw - [Intern] read raw page data without ecc
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- * @page: page number to read
+ * nand_read_page_raw - [INTERN] read raw page data without ecc
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
+ * @page: page number to read
*
- * Not for syndrome calculating ecc controllers, which use a special oob layout
+ * Not for syndrome calculating ECC controllers, which use a special oob layout.
*/
static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int page)
+ uint8_t *buf, int oob_required, int page)
{
chip->read_buf(mtd, buf, mtd->writesize);
- chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+ if (oob_required)
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
return 0;
}
/**
- * nand_read_page_raw_syndrome - [Intern] read raw page data without ecc
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- * @page: page number to read
+ * nand_read_page_raw_syndrome - [INTERN] read raw page data without ecc
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
+ * @page: page number to read
*
* We need a special oob layout and handling even when OOB isn't used.
*/
static int nand_read_page_raw_syndrome(struct mtd_info *mtd,
- struct nand_chip *chip,
- uint8_t *buf, int page)
+ struct nand_chip *chip, uint8_t *buf,
+ int oob_required, int page)
{
int eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -864,14 +887,15 @@
}
/**
- * nand_read_page_swecc - [REPLACABLE] software ecc based page read function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- * @page: page number to read
+ * nand_read_page_swecc - [REPLACEABLE] software ECC based page read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
+ * @page: page number to read
*/
static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int page)
+ uint8_t *buf, int oob_required, int page)
{
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -881,7 +905,7 @@
uint8_t *ecc_code = chip->buffers->ecccode;
uint32_t *eccpos = chip->ecc.layout->eccpos;
- chip->ecc.read_page_raw(mtd, chip, buf, page);
+ chip->ecc.read_page_raw(mtd, chip, buf, 1, page);
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
chip->ecc.calculate(mtd, p, &ecc_calc[i]);
@@ -905,12 +929,12 @@
}
/**
- * nand_read_subpage - [REPLACABLE] software ecc based sub-page read function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @data_offs: offset of requested data within the page
- * @readlen: data length
- * @bufpoi: buffer to store read data
+ * nand_read_subpage - [REPLACEABLE] software ECC based sub-page read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @data_offs: offset of requested data within the page
+ * @readlen: data length
+ * @bufpoi: buffer to store read data
*/
static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi)
@@ -923,12 +947,12 @@
int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1;
int index = 0;
- /* Column address wihin the page aligned to ECC size (256bytes). */
+ /* Column address within the page aligned to ECC size (256bytes) */
start_step = data_offs / chip->ecc.size;
end_step = (data_offs + readlen - 1) / chip->ecc.size;
num_steps = end_step - start_step + 1;
- /* Data size aligned to ECC ecc.size*/
+ /* Data size aligned to ECC ecc.size */
datafrag_len = num_steps * chip->ecc.size;
eccfrag_len = num_steps * chip->ecc.bytes;
@@ -940,13 +964,14 @@
p = bufpoi + data_col_addr;
chip->read_buf(mtd, p, datafrag_len);
- /* Calculate ECC */
+ /* Calculate ECC */
for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size)
chip->ecc.calculate(mtd, p, &chip->buffers->ecccalc[i]);
- /* The performance is faster if to position offsets
- according to ecc.pos. Let make sure here that
- there are no gaps in ecc positions */
+ /*
+ * The performance is faster if we position offsets according to
+ * ecc.pos. Let's make sure that there are no gaps in ECC positions.
+ */
for (i = 0; i < eccfrag_len - 1; i++) {
if (eccpos[i + start_step * chip->ecc.bytes] + 1 !=
eccpos[i + start_step * chip->ecc.bytes + 1]) {
@@ -958,8 +983,10 @@
chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
} else {
- /* send the command to read the particular ecc bytes */
- /* take care about buswidth alignment in read_buf */
+ /*
+ * Send the command to read the particular ECC bytes take care
+ * about buswidth alignment in read_buf.
+ */
index = start_step * chip->ecc.bytes;
aligned_pos = eccpos[index] & ~(busw - 1);
@@ -992,16 +1019,17 @@
}
/**
- * nand_read_page_hwecc - [REPLACABLE] hardware ecc based page read function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- * @page: page number to read
+ * nand_read_page_hwecc - [REPLACEABLE] hardware ECC based page read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
+ * @page: page number to read
*
- * Not for syndrome calculating ecc controllers which need a special oob layout
+ * Not for syndrome calculating ECC controllers which need a special oob layout.
*/
static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int page)
+ uint8_t *buf, int oob_required, int page)
{
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -1037,21 +1065,21 @@
}
/**
- * nand_read_page_hwecc_oob_first - [REPLACABLE] hw ecc, read oob first
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- * @page: page number to read
+ * nand_read_page_hwecc_oob_first - [REPLACEABLE] hw ecc, read oob first
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
+ * @page: page number to read
*
- * Hardware ECC for large page chips, require OOB to be read first.
- * For this ECC mode, the write_page method is re-used from ECC_HW.
- * These methods read/write ECC from the OOB area, unlike the
- * ECC_HW_SYNDROME support with multiple ECC steps, follows the
- * "infix ECC" scheme and reads/writes ECC from the data area, by
- * overwriting the NAND manufacturer bad block markings.
+ * Hardware ECC for large page chips, require OOB to be read first. For this
+ * ECC mode, the write_page method is re-used from ECC_HW. These methods
+ * read/write ECC from the OOB area, unlike the ECC_HW_SYNDROME support with
+ * multiple ECC steps, follows the "infix ECC" scheme and reads/writes ECC from
+ * the data area, by overwriting the NAND manufacturer bad block markings.
*/
static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
- struct nand_chip *chip, uint8_t *buf, int page)
+ struct nand_chip *chip, uint8_t *buf, int oob_required, int page)
{
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -1086,17 +1114,18 @@
}
/**
- * nand_read_page_syndrome - [REPLACABLE] hardware ecc syndrom based page read
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- * @page: page number to read
+ * nand_read_page_syndrome - [REPLACEABLE] hardware ECC syndrome based page read
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
+ * @page: page number to read
*
- * The hw generator calculates the error syndrome automatically. Therefor
- * we need a special oob layout and handling.
+ * The hw generator calculates the error syndrome automatically. Therefore we
+ * need a special oob layout and handling.
*/
static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int page)
+ uint8_t *buf, int oob_required, int page)
{
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -1141,29 +1170,29 @@
}
/**
- * nand_transfer_oob - [Internal] Transfer oob to client buffer
- * @chip: nand chip structure
- * @oob: oob destination address
- * @ops: oob ops structure
- * @len: size of oob to transfer
+ * nand_transfer_oob - [INTERN] Transfer oob to client buffer
+ * @chip: nand chip structure
+ * @oob: oob destination address
+ * @ops: oob ops structure
+ * @len: size of oob to transfer
*/
static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob,
struct mtd_oob_ops *ops, size_t len)
{
switch (ops->mode) {
- case MTD_OOB_PLACE:
- case MTD_OOB_RAW:
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_RAW:
memcpy(oob, chip->oob_poi + ops->ooboffs, len);
return oob + len;
- case MTD_OOB_AUTO: {
+ case MTD_OPS_AUTO_OOB: {
struct nand_oobfree *free = chip->ecc.layout->oobfree;
uint32_t boffs = 0, roffs = ops->ooboffs;
size_t bytes = 0;
for (; free->length && len; free++, len -= bytes) {
- /* Read request not from offset 0 ? */
+ /* Read request not from offset 0? */
if (unlikely(roffs)) {
if (roffs >= free->length) {
roffs -= free->length;
@@ -1189,26 +1218,23 @@
}
/**
- * nand_do_read_ops - [Internal] Read data with ECC
- *
- * @mtd: MTD device structure
- * @from: offset to read from
- * @ops: oob ops structure
+ * nand_do_read_ops - [INTERN] Read data with ECC
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob ops structure
*
* Internal function. Called with chip held.
*/
static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
struct mtd_oob_ops *ops)
{
- int chipnr, page, realpage, col, bytes, aligned;
+ int chipnr, page, realpage, col, bytes, aligned, oob_required;
struct nand_chip *chip = mtd->priv;
struct mtd_ecc_stats stats;
- int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
- int sndcmd = 1;
int ret = 0;
uint32_t readlen = ops->len;
uint32_t oobreadlen = ops->ooblen;
- uint32_t max_oobsize = ops->mode == MTD_OOB_AUTO ?
+ uint32_t max_oobsize = ops->mode == MTD_OPS_AUTO_OOB ?
mtd->oobavail : mtd->oobsize;
uint8_t *bufpoi, *oob, *buf;
@@ -1225,6 +1251,7 @@
buf = ops->datbuf;
oob = ops->oobbuf;
+ oob_required = oob ? 1 : 0;
while (1) {
WATCHDOG_RESET();
@@ -1232,41 +1259,46 @@
bytes = min(mtd->writesize - col, readlen);
aligned = (bytes == mtd->writesize);
- /* Is the current page in the buffer ? */
+ /* Is the current page in the buffer? */
if (realpage != chip->pagebuf || oob) {
bufpoi = aligned ? buf : chip->buffers->databuf;
- if (likely(sndcmd)) {
- chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
- sndcmd = 0;
- }
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
/* Now read the page into the buffer */
- if (unlikely(ops->mode == MTD_OOB_RAW))
- ret = chip->ecc.read_page_raw(mtd, chip,
- bufpoi, page);
+ if (unlikely(ops->mode == MTD_OPS_RAW))
+ ret = chip->ecc.read_page_raw(mtd, chip, bufpoi,
+ oob_required,
+ page);
else if (!aligned && NAND_HAS_SUBPAGE_READ(chip) &&
!oob)
ret = chip->ecc.read_subpage(mtd, chip,
col, bytes, bufpoi);
else
ret = chip->ecc.read_page(mtd, chip, bufpoi,
- page);
- if (ret < 0)
+ oob_required, page);
+ if (ret < 0) {
+ if (!aligned)
+ /* Invalidate page cache */
+ chip->pagebuf = -1;
break;
+ }
/* Transfer not aligned data */
if (!aligned) {
if (!NAND_HAS_SUBPAGE_READ(chip) && !oob &&
- !(mtd->ecc_stats.failed - stats.failed))
+ !(mtd->ecc_stats.failed - stats.failed) &&
+ (ops->mode != MTD_OPS_RAW))
chip->pagebuf = realpage;
+ else
+ /* Invalidate page cache */
+ chip->pagebuf = -1;
memcpy(buf, chip->buffers->databuf + col, bytes);
}
buf += bytes;
if (unlikely(oob)) {
-
int toread = min(oobreadlen, max_oobsize);
if (toread) {
@@ -1275,20 +1307,6 @@
oobreadlen -= toread;
}
}
-
- if (!(chip->options & NAND_NO_READRDY)) {
- /*
- * Apply delay or wait for ready/busy pin. Do
- * this before the AUTOINCR check, so no
- * problems arise if a chip which does auto
- * increment is marked as NOAUTOINCR by the
- * board driver.
- */
- if (!chip->dev_ready)
- udelay(chip->chip_delay);
- else
- nand_wait_ready(mtd);
- }
} else {
memcpy(buf, chip->buffers->databuf + col, bytes);
buf += bytes;
@@ -1299,7 +1317,7 @@
if (!readlen)
break;
- /* For subsequent reads align to page boundary. */
+ /* For subsequent reads align to page boundary */
col = 0;
/* Increment page address */
realpage++;
@@ -1311,12 +1329,6 @@
chip->select_chip(mtd, -1);
chip->select_chip(mtd, chipnr);
}
-
- /* Check, if the chip supports auto page increment
- * or if we have hit a block boundary.
- */
- if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck))
- sndcmd = 1;
}
ops->retlen = ops->len - (size_t) readlen;
@@ -1334,69 +1346,55 @@
/**
* nand_read - [MTD Interface] MTD compatibility function for nand_do_read_ecc
- * @mtd: MTD device structure
- * @from: offset to read from
- * @len: number of bytes to read
- * @retlen: pointer to variable to store the number of read bytes
- * @buf: the databuffer to put data
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @len: number of bytes to read
+ * @retlen: pointer to variable to store the number of read bytes
+ * @buf: the databuffer to put data
*
- * Get hold of the chip and call nand_do_read
+ * Get hold of the chip and call nand_do_read.
*/
static int nand_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, uint8_t *buf)
{
struct nand_chip *chip = mtd->priv;
+ struct mtd_oob_ops ops;
int ret;
- /* Do not allow reads past end of device */
- if ((from + len) > mtd->size)
- return -EINVAL;
- if (!len)
- return 0;
-
nand_get_device(chip, mtd, FL_READING);
-
- chip->ops.len = len;
- chip->ops.datbuf = buf;
- chip->ops.oobbuf = NULL;
-
- ret = nand_do_read_ops(mtd, from, &chip->ops);
-
- *retlen = chip->ops.retlen;
-
+ ops.len = len;
+ ops.datbuf = buf;
+ ops.oobbuf = NULL;
+ ops.mode = MTD_OPS_PLACE_OOB;
+ ret = nand_do_read_ops(mtd, from, &ops);
+ *retlen = ops.retlen;
nand_release_device(mtd);
-
return ret;
}
/**
- * nand_read_oob_std - [REPLACABLE] the most common OOB data read function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @page: page number to read
- * @sndcmd: flag whether to issue read command or not
+ * nand_read_oob_std - [REPLACEABLE] the most common OOB data read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to read
*/
static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
- int page, int sndcmd)
+ int page)
{
- if (sndcmd) {
- chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
- sndcmd = 0;
- }
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
- return sndcmd;
+ return 0;
}
/**
- * nand_read_oob_syndrome - [REPLACABLE] OOB data read function for HW ECC
+ * nand_read_oob_syndrome - [REPLACEABLE] OOB data read function for HW ECC
* with syndromes
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @page: page number to read
- * @sndcmd: flag whether to issue read command or not
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to read
*/
static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
- int page, int sndcmd)
+ int page)
{
uint8_t *buf = chip->oob_poi;
int length = mtd->oobsize;
@@ -1423,14 +1421,14 @@
if (length > 0)
chip->read_buf(mtd, bufpoi, length);
- return 1;
+ return 0;
}
/**
- * nand_write_oob_std - [REPLACABLE] the most common OOB data write function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @page: page number to write
+ * nand_write_oob_std - [REPLACEABLE] the most common OOB data write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to write
*/
static int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
int page)
@@ -1450,11 +1448,11 @@
}
/**
- * nand_write_oob_syndrome - [REPLACABLE] OOB data write function for HW ECC
- * with syndrome - only for large page flash !
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @page: page number to write
+ * nand_write_oob_syndrome - [REPLACEABLE] OOB data write function for HW ECC
+ * with syndrome - only for large page flash
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to write
*/
static int nand_write_oob_syndrome(struct mtd_info *mtd,
struct nand_chip *chip, int page)
@@ -1509,27 +1507,30 @@
}
/**
- * nand_do_read_oob - [Intern] NAND read out-of-band
- * @mtd: MTD device structure
- * @from: offset to read from
- * @ops: oob operations description structure
+ * nand_do_read_oob - [INTERN] NAND read out-of-band
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob operations description structure
*
- * NAND read out-of-band data from the spare area
+ * NAND read out-of-band data from the spare area.
*/
static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
struct mtd_oob_ops *ops)
{
- int page, realpage, chipnr, sndcmd = 1;
+ int page, realpage, chipnr;
struct nand_chip *chip = mtd->priv;
- int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
+ struct mtd_ecc_stats stats;
int readlen = ops->ooblen;
int len;
uint8_t *buf = ops->oobbuf;
+ int ret = 0;
MTDDEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08Lx, len = %i\n",
__func__, (unsigned long long)from, readlen);
- if (ops->mode == MTD_OOB_AUTO)
+ stats = mtd->ecc_stats;
+
+ if (ops->mode == MTD_OPS_AUTO_OOB)
len = chip->ecc.layout->oobavail;
else
len = mtd->oobsize;
@@ -1558,24 +1559,17 @@
while (1) {
WATCHDOG_RESET();
- sndcmd = chip->ecc.read_oob(mtd, chip, page, sndcmd);
+ if (ops->mode == MTD_OPS_RAW)
+ ret = chip->ecc.read_oob_raw(mtd, chip, page);
+ else
+ ret = chip->ecc.read_oob(mtd, chip, page);
+
+ if (ret < 0)
+ break;
len = min(len, readlen);
buf = nand_transfer_oob(chip, buf, ops, len);
- if (!(chip->options & NAND_NO_READRDY)) {
- /*
- * Apply delay or wait for ready/busy pin. Do this
- * before the AUTOINCR check, so no problems arise if a
- * chip which does auto increment is marked as
- * NOAUTOINCR by the board driver.
- */
- if (!chip->dev_ready)
- udelay(chip->chip_delay);
- else
- nand_wait_ready(mtd);
- }
-
readlen -= len;
if (!readlen)
break;
@@ -1590,25 +1584,26 @@
chip->select_chip(mtd, -1);
chip->select_chip(mtd, chipnr);
}
-
- /* Check, if the chip supports auto page increment
- * or if we have hit a block boundary.
- */
- if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck))
- sndcmd = 1;
}
- ops->oobretlen = ops->ooblen;
- return 0;
+ ops->oobretlen = ops->ooblen - readlen;
+
+ if (ret < 0)
+ return ret;
+
+ if (mtd->ecc_stats.failed - stats.failed)
+ return -EBADMSG;
+
+ return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0;
}
/**
* nand_read_oob - [MTD Interface] NAND read data and/or out-of-band
- * @mtd: MTD device structure
- * @from: offset to read from
- * @ops: oob operation description structure
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob operation description structure
*
- * NAND read data and/or out-of-band data
+ * NAND read data and/or out-of-band data.
*/
static int nand_read_oob(struct mtd_info *mtd, loff_t from,
struct mtd_oob_ops *ops)
@@ -1628,9 +1623,9 @@
nand_get_device(chip, mtd, FL_READING);
switch (ops->mode) {
- case MTD_OOB_PLACE:
- case MTD_OOB_AUTO:
- case MTD_OOB_RAW:
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_AUTO_OOB:
+ case MTD_OPS_RAW:
break;
default:
@@ -1649,31 +1644,36 @@
/**
- * nand_write_page_raw - [Intern] raw page write function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: data buffer
+ * nand_write_page_raw - [INTERN] raw page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
+ * @oob_required: must write chip->oob_poi to OOB
*
- * Not for syndrome calculating ecc controllers, which use a special oob layout
+ * Not for syndrome calculating ECC controllers, which use a special oob layout.
*/
-static void nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf)
+static int nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required)
{
chip->write_buf(mtd, buf, mtd->writesize);
- chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+ if (oob_required)
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
}
/**
- * nand_write_page_raw_syndrome - [Intern] raw page write function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: data buffer
+ * nand_write_page_raw_syndrome - [INTERN] raw page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
+ * @oob_required: must write chip->oob_poi to OOB
*
* We need a special oob layout and handling even when ECC isn't checked.
*/
-static void nand_write_page_raw_syndrome(struct mtd_info *mtd,
+static int nand_write_page_raw_syndrome(struct mtd_info *mtd,
struct nand_chip *chip,
- const uint8_t *buf)
+ const uint8_t *buf, int oob_required)
{
int eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -1701,15 +1701,18 @@
size = mtd->oobsize - (oob - chip->oob_poi);
if (size)
chip->write_buf(mtd, oob, size);
+
+ return 0;
}
/**
- * nand_write_page_swecc - [REPLACABLE] software ecc based page write function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: data buffer
+ * nand_write_page_swecc - [REPLACEABLE] software ECC based page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
+ * @oob_required: must write chip->oob_poi to OOB
*/
-static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf)
+static int nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required)
{
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -1718,24 +1721,25 @@
const uint8_t *p = buf;
uint32_t *eccpos = chip->ecc.layout->eccpos;
- /* Software ecc calculation */
+ /* Software ECC calculation */
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
chip->ecc.calculate(mtd, p, &ecc_calc[i]);
for (i = 0; i < chip->ecc.total; i++)
chip->oob_poi[eccpos[i]] = ecc_calc[i];
- chip->ecc.write_page_raw(mtd, chip, buf);
+ return chip->ecc.write_page_raw(mtd, chip, buf, 1);
}
/**
- * nand_write_page_hwecc - [REPLACABLE] hardware ecc based page write function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: data buffer
+ * nand_write_page_hwecc - [REPLACEABLE] hardware ECC based page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
+ * @oob_required: must write chip->oob_poi to OOB
*/
-static void nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf)
+static int nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required)
{
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -1754,19 +1758,23 @@
chip->oob_poi[eccpos[i]] = ecc_calc[i];
chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
}
/**
- * nand_write_page_syndrome - [REPLACABLE] hardware ecc syndrom based page write
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: data buffer
+ * nand_write_page_syndrome - [REPLACEABLE] hardware ECC syndrome based page write
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
+ * @oob_required: must write chip->oob_poi to OOB
*
- * The hw generator calculates the error syndrome automatically. Therefor
- * we need a special oob layout and handling.
+ * The hw generator calculates the error syndrome automatically. Therefore we
+ * need a special oob layout and handling.
*/
-static void nand_write_page_syndrome(struct mtd_info *mtd,
- struct nand_chip *chip, const uint8_t *buf)
+static int nand_write_page_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ const uint8_t *buf, int oob_required)
{
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -1798,32 +1806,39 @@
i = mtd->oobsize - (oob - chip->oob_poi);
if (i)
chip->write_buf(mtd, oob, i);
+
+ return 0;
}
/**
* nand_write_page - [REPLACEABLE] write one page
- * @mtd: MTD device structure
- * @chip: NAND chip descriptor
- * @buf: the data to write
- * @page: page number to write
- * @cached: cached programming
- * @raw: use _raw version of write_page
+ * @mtd: MTD device structure
+ * @chip: NAND chip descriptor
+ * @buf: the data to write
+ * @oob_required: must write chip->oob_poi to OOB
+ * @page: page number to write
+ * @cached: cached programming
+ * @raw: use _raw version of write_page
*/
static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf, int page, int cached, int raw)
+ const uint8_t *buf, int oob_required, int page,
+ int cached, int raw)
{
int status;
chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
if (unlikely(raw))
- chip->ecc.write_page_raw(mtd, chip, buf);
+ status = chip->ecc.write_page_raw(mtd, chip, buf, oob_required);
else
- chip->ecc.write_page(mtd, chip, buf);
+ status = chip->ecc.write_page(mtd, chip, buf, oob_required);
+
+ if (status < 0)
+ return status;
/*
- * Cached progamming disabled for now, Not sure if its worth the
- * trouble. The speed gain is not very impressive. (2.3->2.6Mib/s)
+ * Cached progamming disabled for now. Not sure if it's worth the
+ * trouble. The speed gain is not very impressive. (2.3->2.6Mib/s).
*/
cached = 0;
@@ -1833,7 +1848,7 @@
status = chip->waitfunc(mtd, chip);
/*
* See if operation failed and additional status checks are
- * available
+ * available.
*/
if ((status & NAND_STATUS_FAIL) && (chip->errstat))
status = chip->errstat(mtd, chip, FL_WRITING, status,
@@ -1852,34 +1867,45 @@
if (chip->verify_buf(mtd, buf, mtd->writesize))
return -EIO;
+
+ /* Make sure the next page prog is preceded by a status read */
+ chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
#endif
return 0;
}
/**
- * nand_fill_oob - [Internal] Transfer client buffer to oob
- * @chip: nand chip structure
- * @oob: oob data buffer
- * @len: oob data write length
- * @ops: oob ops structure
+ * nand_fill_oob - [INTERN] Transfer client buffer to oob
+ * @mtd: MTD device structure
+ * @oob: oob data buffer
+ * @len: oob data write length
+ * @ops: oob ops structure
*/
-static uint8_t *nand_fill_oob(struct nand_chip *chip, uint8_t *oob, size_t len,
- struct mtd_oob_ops *ops)
+static uint8_t *nand_fill_oob(struct mtd_info *mtd, uint8_t *oob, size_t len,
+ struct mtd_oob_ops *ops)
{
+ struct nand_chip *chip = mtd->priv;
+
+ /*
+ * Initialise to all 0xFF, to avoid the possibility of left over OOB
+ * data from a previous OOB read.
+ */
+ memset(chip->oob_poi, 0xff, mtd->oobsize);
+
switch (ops->mode) {
- case MTD_OOB_PLACE:
- case MTD_OOB_RAW:
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_RAW:
memcpy(chip->oob_poi + ops->ooboffs, oob, len);
return oob + len;
- case MTD_OOB_AUTO: {
+ case MTD_OPS_AUTO_OOB: {
struct nand_oobfree *free = chip->ecc.layout->oobfree;
uint32_t boffs = 0, woffs = ops->ooboffs;
size_t bytes = 0;
for (; free->length && len; free++, len -= bytes) {
- /* Write request not from offset 0 ? */
+ /* Write request not from offset 0? */
if (unlikely(woffs)) {
if (woffs >= free->length) {
woffs -= free->length;
@@ -1907,12 +1933,12 @@
#define NOTALIGNED(x) ((x & (chip->subpagesize - 1)) != 0)
/**
- * nand_do_write_ops - [Internal] NAND write with ECC
- * @mtd: MTD device structure
- * @to: offset to write to
- * @ops: oob operations description structure
+ * nand_do_write_ops - [INTERN] NAND write with ECC
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operations description structure
*
- * NAND write with ECC
+ * NAND write with ECC.
*/
static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
@@ -1922,12 +1948,13 @@
uint32_t writelen = ops->len;
uint32_t oobwritelen = ops->ooblen;
- uint32_t oobmaxlen = ops->mode == MTD_OOB_AUTO ?
+ uint32_t oobmaxlen = ops->mode == MTD_OPS_AUTO_OOB ?
mtd->oobavail : mtd->oobsize;
uint8_t *oob = ops->oobbuf;
uint8_t *buf = ops->datbuf;
int ret, subpage;
+ int oob_required = oob ? 1 : 0;
ops->retlen = 0;
if (!writelen)
@@ -1957,10 +1984,6 @@
(chip->pagebuf << chip->page_shift) < (to + ops->len))
chip->pagebuf = -1;
- /* If we're not given explicit OOB data, let it be 0xFF */
- if (likely(!oob))
- memset(chip->oob_poi, 0xff, mtd->oobsize);
-
/* Don't allow multipage oob writes with offset */
if (oob && ops->ooboffs && (ops->ooboffs + ops->ooblen > oobmaxlen))
return -EINVAL;
@@ -1972,8 +1995,8 @@
int cached = writelen > bytes && page != blockmask;
uint8_t *wbuf = buf;
- /* Partial page write ? */
- if (unlikely(column || writelen < (mtd->writesize - 1))) {
+ /* Partial page write? */
+ if (unlikely(column || writelen < mtd->writesize)) {
cached = 0;
bytes = min_t(int, bytes - column, (int) writelen);
chip->pagebuf = -1;
@@ -1984,12 +2007,15 @@
if (unlikely(oob)) {
size_t len = min(oobwritelen, oobmaxlen);
- oob = nand_fill_oob(chip, oob, len, ops);
+ oob = nand_fill_oob(mtd, oob, len, ops);
oobwritelen -= len;
+ } else {
+ /* We still need to erase leftover OOB data */
+ memset(chip->oob_poi, 0xff, mtd->oobsize);
}
- ret = chip->write_page(mtd, chip, wbuf, page, cached,
- (ops->mode == MTD_OOB_RAW));
+ ret = chip->write_page(mtd, chip, wbuf, oob_required, page,
+ cached, (ops->mode == MTD_OPS_RAW));
if (ret)
break;
@@ -2018,48 +2044,39 @@
/**
* nand_write - [MTD Interface] NAND write with ECC
- * @mtd: MTD device structure
- * @to: offset to write to
- * @len: number of bytes to write
- * @retlen: pointer to variable to store the number of written bytes
- * @buf: the data to write
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @len: number of bytes to write
+ * @retlen: pointer to variable to store the number of written bytes
+ * @buf: the data to write
*
- * NAND write with ECC
+ * NAND write with ECC.
*/
static int nand_write(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const uint8_t *buf)
{
struct nand_chip *chip = mtd->priv;
+ struct mtd_oob_ops ops;
int ret;
- /* Do not allow writes past end of device */
- if ((to + len) > mtd->size)
- return -EINVAL;
- if (!len)
- return 0;
-
nand_get_device(chip, mtd, FL_WRITING);
-
- chip->ops.len = len;
- chip->ops.datbuf = (uint8_t *)buf;
- chip->ops.oobbuf = NULL;
-
- ret = nand_do_write_ops(mtd, to, &chip->ops);
-
- *retlen = chip->ops.retlen;
-
+ ops.len = len;
+ ops.datbuf = (uint8_t *)buf;
+ ops.oobbuf = NULL;
+ ops.mode = MTD_OPS_PLACE_OOB;
+ ret = nand_do_write_ops(mtd, to, &ops);
+ *retlen = ops.retlen;
nand_release_device(mtd);
-
return ret;
}
/**
* nand_do_write_oob - [MTD Interface] NAND write out-of-band
- * @mtd: MTD device structure
- * @to: offset to write to
- * @ops: oob operation description structure
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operation description structure
*
- * NAND write out-of-band
+ * NAND write out-of-band.
*/
static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
@@ -2070,7 +2087,7 @@
MTDDEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
__func__, (unsigned int)to, (int)ops->ooblen);
- if (ops->mode == MTD_OOB_AUTO)
+ if (ops->mode == MTD_OPS_AUTO_OOB)
len = chip->ecc.layout->oobavail;
else
len = mtd->oobsize;
@@ -2120,10 +2137,12 @@
if (page == chip->pagebuf)
chip->pagebuf = -1;
- memset(chip->oob_poi, 0xff, mtd->oobsize);
- nand_fill_oob(chip, ops->oobbuf, ops->ooblen, ops);
- status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask);
- memset(chip->oob_poi, 0xff, mtd->oobsize);
+ nand_fill_oob(mtd, ops->oobbuf, ops->ooblen, ops);
+
+ if (ops->mode == MTD_OPS_RAW)
+ status = chip->ecc.write_oob_raw(mtd, chip, page & chip->pagemask);
+ else
+ status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask);
if (status)
return status;
@@ -2135,9 +2154,9 @@
/**
* nand_write_oob - [MTD Interface] NAND write data and/or out-of-band
- * @mtd: MTD device structure
- * @to: offset to write to
- * @ops: oob operation description structure
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operation description structure
*/
static int nand_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
@@ -2157,9 +2176,9 @@
nand_get_device(chip, mtd, FL_WRITING);
switch (ops->mode) {
- case MTD_OOB_PLACE:
- case MTD_OOB_AUTO:
- case MTD_OOB_RAW:
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_AUTO_OOB:
+ case MTD_OPS_RAW:
break;
default:
@@ -2177,11 +2196,11 @@
}
/**
- * single_erease_cmd - [GENERIC] NAND standard block erase command function
- * @mtd: MTD device structure
- * @page: the page address of the block which will be erased
+ * single_erase_cmd - [GENERIC] NAND standard block erase command function
+ * @mtd: MTD device structure
+ * @page: the page address of the block which will be erased
*
- * Standard erase command for NAND chips
+ * Standard erase command for NAND chips.
*/
static void single_erase_cmd(struct mtd_info *mtd, int page)
{
@@ -2192,12 +2211,11 @@
}
/**
- * multi_erease_cmd - [GENERIC] AND specific block erase command function
- * @mtd: MTD device structure
- * @page: the page address of the block which will be erased
+ * multi_erase_cmd - [GENERIC] AND specific block erase command function
+ * @mtd: MTD device structure
+ * @page: the page address of the block which will be erased
*
- * AND multi block erase command function
- * Erase 4 consecutive blocks
+ * AND multi block erase command function. Erase 4 consecutive blocks.
*/
static void multi_erase_cmd(struct mtd_info *mtd, int page)
{
@@ -2212,10 +2230,10 @@
/**
* nand_erase - [MTD Interface] erase block(s)
- * @mtd: MTD device structure
- * @instr: erase instruction
+ * @mtd: MTD device structure
+ * @instr: erase instruction
*
- * Erase one ore more blocks
+ * Erase one ore more blocks.
*/
static int nand_erase(struct mtd_info *mtd, struct erase_info *instr)
{
@@ -2224,12 +2242,12 @@
#define BBT_PAGE_MASK 0xffffff3f
/**
- * nand_erase_nand - [Internal] erase block(s)
- * @mtd: MTD device structure
- * @instr: erase instruction
- * @allowbbt: allow erasing the bbt area
+ * nand_erase_nand - [INTERN] erase block(s)
+ * @mtd: MTD device structure
+ * @instr: erase instruction
+ * @allowbbt: allow erasing the bbt area
*
- * Erase one ore more blocks
+ * Erase one ore more blocks.
*/
int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
int allowbbt)
@@ -2247,8 +2265,6 @@
if (check_offs_len(mtd, instr->addr, instr->len))
return -EINVAL;
- instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
-
/* Grab the lock and see if the device is available */
nand_get_device(chip, mtd, FL_ERASING);
@@ -2274,7 +2290,7 @@
* If BBT requires refresh, set the BBT page mask to see if the BBT
* should be rewritten. Otherwise the mask is set to 0xffffffff which
* can not be matched. This is also done when the bbt is actually
- * erased to avoid recusrsive updates
+ * erased to avoid recursive updates.
*/
if (chip->options & BBT_AUTO_REFRESH && !allowbbt)
bbt_masked_page = chip->bbt_td->pages[chipnr] & BBT_PAGE_MASK;
@@ -2286,20 +2302,18 @@
while (len) {
WATCHDOG_RESET();
- /*
- * heck if we have a bad block, we do not erase bad blocks !
- */
+ /* Check if we have a bad block, we do not erase bad blocks! */
if (!instr->scrub && nand_block_checkbad(mtd, ((loff_t) page) <<
chip->page_shift, 0, allowbbt)) {
- printk(KERN_WARNING "%s: attempt to erase a bad block "
- "at page 0x%08x\n", __func__, page);
+ pr_warn("%s: attempt to erase a bad block at page 0x%08x\n",
+ __func__, page);
instr->state = MTD_ERASE_FAILED;
goto erase_exit;
}
/*
* Invalidate the page cache, if we erase the block which
- * contains the current cached page
+ * contains the current cached page.
*/
if (page <= chip->pagebuf && chip->pagebuf <
(page + pages_per_block))
@@ -2329,7 +2343,7 @@
/*
* If BBT requires refresh, set the BBT rewrite flag to the
- * page being erased
+ * page being erased.
*/
if (bbt_masked_page != 0xffffffff &&
(page & BBT_PAGE_MASK) == bbt_masked_page)
@@ -2348,7 +2362,7 @@
/*
* If BBT requires refresh and BBT-PERCHIP, set the BBT
- * page mask to see if this BBT should be rewritten
+ * page mask to see if this BBT should be rewritten.
*/
if (bbt_masked_page != 0xffffffff &&
(chip->bbt_td->options & NAND_BBT_PERCHIP))
@@ -2371,7 +2385,7 @@
/*
* If BBT requires refresh and erase was successful, rewrite any
- * selected bad block tables
+ * selected bad block tables.
*/
if (bbt_masked_page == 0xffffffff || ret)
return ret;
@@ -2379,7 +2393,7 @@
for (chipnr = 0; chipnr < chip->numchips; chipnr++) {
if (!rewrite_bbt[chipnr])
continue;
- /* update the BBT for chip */
+ /* Update the BBT for chip */
MTDDEBUG(MTD_DEBUG_LEVEL0, "%s: nand_update_bbt "
"(%d:0x%0llx 0x%0x)\n", __func__, chipnr,
rewrite_bbt[chipnr], chip->bbt_td->pages[chipnr]);
@@ -2392,9 +2406,9 @@
/**
* nand_sync - [MTD Interface] sync
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*
- * Sync is actually a wait for chip ready function
+ * Sync is actually a wait for chip ready function.
*/
static void nand_sync(struct mtd_info *mtd)
{
@@ -2410,22 +2424,18 @@
/**
* nand_block_isbad - [MTD Interface] Check if block at offset is bad
- * @mtd: MTD device structure
- * @offs: offset relative to mtd start
+ * @mtd: MTD device structure
+ * @offs: offset relative to mtd start
*/
static int nand_block_isbad(struct mtd_info *mtd, loff_t offs)
{
- /* Check for invalid offset */
- if (offs > mtd->size)
- return -EINVAL;
-
return nand_block_checkbad(mtd, offs, 1, 0);
}
/**
* nand_block_markbad - [MTD Interface] Mark block at the given offset as bad
- * @mtd: MTD device structure
- * @ofs: offset relative to mtd start
+ * @mtd: MTD device structure
+ * @ofs: offset relative to mtd start
*/
static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
{
@@ -2434,7 +2444,7 @@
ret = nand_block_isbad(mtd, ofs);
if (ret) {
- /* If it was bad already, return success and do nothing. */
+ /* If it was bad already, return success and do nothing */
if (ret > 0)
return 0;
return ret;
@@ -2443,9 +2453,51 @@
return chip->block_markbad(mtd, ofs);
}
-/*
- * Set default functions
+ /**
+ * nand_onfi_set_features- [REPLACEABLE] set features for ONFI nand
+ * @mtd: MTD device structure
+ * @chip: nand chip info structure
+ * @addr: feature address.
+ * @subfeature_param: the subfeature parameters, a four bytes array.
*/
+static int nand_onfi_set_features(struct mtd_info *mtd, struct nand_chip *chip,
+ int addr, uint8_t *subfeature_param)
+{
+ int status;
+
+ if (!chip->onfi_version)
+ return -EINVAL;
+
+ chip->cmdfunc(mtd, NAND_CMD_SET_FEATURES, addr, -1);
+ chip->write_buf(mtd, subfeature_param, ONFI_SUBFEATURE_PARAM_LEN);
+ status = chip->waitfunc(mtd, chip);
+ if (status & NAND_STATUS_FAIL)
+ return -EIO;
+ return 0;
+}
+
+/**
+ * nand_onfi_get_features- [REPLACEABLE] get features for ONFI nand
+ * @mtd: MTD device structure
+ * @chip: nand chip info structure
+ * @addr: feature address.
+ * @subfeature_param: the subfeature parameters, a four bytes array.
+ */
+static int nand_onfi_get_features(struct mtd_info *mtd, struct nand_chip *chip,
+ int addr, uint8_t *subfeature_param)
+{
+ if (!chip->onfi_version)
+ return -EINVAL;
+
+ /* clear the sub feature parameters */
+ memset(subfeature_param, 0, ONFI_SUBFEATURE_PARAM_LEN);
+
+ chip->cmdfunc(mtd, NAND_CMD_GET_FEATURES, addr, -1);
+ chip->read_buf(mtd, subfeature_param, ONFI_SUBFEATURE_PARAM_LEN);
+ return 0;
+}
+
+/* Set default functions */
static void nand_set_defaults(struct nand_chip *chip, int busw)
{
/* check for proper chip_delay setup, set 20us if not */
@@ -2483,23 +2535,21 @@
}
#ifdef CONFIG_SYS_NAND_ONFI_DETECTION
-/*
- * sanitize ONFI strings so we can safely print them
- */
+/* Sanitize ONFI strings so we can safely print them */
static void sanitize_string(char *s, size_t len)
{
ssize_t i;
- /* null terminate */
+ /* Null terminate */
s[len - 1] = 0;
- /* remove non printable chars */
+ /* Remove non printable chars */
for (i = 0; i < len - 1; i++) {
if (s[i] < ' ' || s[i] > 127)
s[i] = '?';
}
- /* remove trailing spaces */
+ /* Remove trailing spaces */
strim(s);
}
@@ -2516,7 +2566,7 @@
}
/*
- * Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise
+ * Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise.
*/
static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
int *busw)
@@ -2525,20 +2575,18 @@
int i;
int val;
- /* try ONFI for unknow chip or LP */
+ /* Try ONFI for unknown chip or LP */
chip->cmdfunc(mtd, NAND_CMD_READID, 0x20, -1);
if (chip->read_byte(mtd) != 'O' || chip->read_byte(mtd) != 'N' ||
chip->read_byte(mtd) != 'F' || chip->read_byte(mtd) != 'I')
return 0;
- MTDDEBUG(MTD_DEBUG_LEVEL0, "ONFI flash detected\n");
chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1);
for (i = 0; i < 3; i++) {
chip->read_buf(mtd, (uint8_t *)p, sizeof(*p));
if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 254) ==
le16_to_cpu(p->crc)) {
- MTDDEBUG(MTD_DEBUG_LEVEL0,
- "ONFI param page %d valid\n", i);
+ pr_info("ONFI param page %d valid\n", i);
break;
}
}
@@ -2546,7 +2594,7 @@
if (i == 3)
return 0;
- /* check version */
+ /* Check version */
val = le16_to_cpu(p->revision);
if (val & (1 << 5))
chip->onfi_version = 23;
@@ -2562,8 +2610,7 @@
chip->onfi_version = 0;
if (!chip->onfi_version) {
- printk(KERN_INFO "%s: unsupported ONFI version: %d\n",
- __func__, val);
+ pr_info("%s: unsupported ONFI version: %d\n", __func__, val);
return 0;
}
@@ -2580,8 +2627,7 @@
if (le16_to_cpu(p->features) & 1)
*busw = NAND_BUSWIDTH_16;
- chip->options |= NAND_NO_READRDY | NAND_NO_AUTOINCR;
-
+ pr_info("ONFI flash detected\n");
return 1;
}
#else
@@ -2594,7 +2640,248 @@
#endif
/*
- * Get the flash and manufacturer id and lookup if the type is supported
+ * nand_id_has_period - Check if an ID string has a given wraparound period
+ * @id_data: the ID string
+ * @arrlen: the length of the @id_data array
+ * @period: the period of repitition
+ *
+ * Check if an ID string is repeated within a given sequence of bytes at
+ * specific repetition interval period (e.g., {0x20,0x01,0x7F,0x20} has a
+ * period of 2). This is a helper function for nand_id_len(). Returns non-zero
+ * if the repetition has a period of @period; otherwise, returns zero.
+ */
+static int nand_id_has_period(u8 *id_data, int arrlen, int period)
+{
+ int i, j;
+ for (i = 0; i < period; i++)
+ for (j = i + period; j < arrlen; j += period)
+ if (id_data[i] != id_data[j])
+ return 0;
+ return 1;
+}
+
+/*
+ * nand_id_len - Get the length of an ID string returned by CMD_READID
+ * @id_data: the ID string
+ * @arrlen: the length of the @id_data array
+
+ * Returns the length of the ID string, according to known wraparound/trailing
+ * zero patterns. If no pattern exists, returns the length of the array.
+ */
+static int nand_id_len(u8 *id_data, int arrlen)
+{
+ int last_nonzero, period;
+
+ /* Find last non-zero byte */
+ for (last_nonzero = arrlen - 1; last_nonzero >= 0; last_nonzero--)
+ if (id_data[last_nonzero])
+ break;
+
+ /* All zeros */
+ if (last_nonzero < 0)
+ return 0;
+
+ /* Calculate wraparound period */
+ for (period = 1; period < arrlen; period++)
+ if (nand_id_has_period(id_data, arrlen, period))
+ break;
+
+ /* There's a repeated pattern */
+ if (period < arrlen)
+ return period;
+
+ /* There are trailing zeros */
+ if (last_nonzero < arrlen - 1)
+ return last_nonzero + 1;
+
+ /* No pattern detected */
+ return arrlen;
+}
+
+/*
+ * Many new NAND share similar device ID codes, which represent the size of the
+ * chip. The rest of the parameters must be decoded according to generic or
+ * manufacturer-specific "extended ID" decoding patterns.
+ */
+static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip,
+ u8 id_data[8], int *busw)
+{
+ int extid, id_len;
+ /* The 3rd id byte holds MLC / multichip data */
+ chip->cellinfo = id_data[2];
+ /* The 4th id byte is the important one */
+ extid = id_data[3];
+
+ id_len = nand_id_len(id_data, 8);
+
+ /*
+ * Field definitions are in the following datasheets:
+ * Old style (4,5 byte ID): Samsung K9GAG08U0M (p.32)
+ * New Samsung (6 byte ID): Samsung K9GAG08U0F (p.44)
+ * Hynix MLC (6 byte ID): Hynix H27UBG8T2B (p.22)
+ *
+ * Check for ID length, non-zero 6th byte, cell type, and Hynix/Samsung
+ * ID to decide what to do.
+ */
+ if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG &&
+ (chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
+ id_data[5] != 0x00) {
+ /* Calc pagesize */
+ mtd->writesize = 2048 << (extid & 0x03);
+ extid >>= 2;
+ /* Calc oobsize */
+ switch (((extid >> 2) & 0x04) | (extid & 0x03)) {
+ case 1:
+ mtd->oobsize = 128;
+ break;
+ case 2:
+ mtd->oobsize = 218;
+ break;
+ case 3:
+ mtd->oobsize = 400;
+ break;
+ case 4:
+ mtd->oobsize = 436;
+ break;
+ case 5:
+ mtd->oobsize = 512;
+ break;
+ case 6:
+ default: /* Other cases are "reserved" (unknown) */
+ mtd->oobsize = 640;
+ break;
+ }
+ extid >>= 2;
+ /* Calc blocksize */
+ mtd->erasesize = (128 * 1024) <<
+ (((extid >> 1) & 0x04) | (extid & 0x03));
+ *busw = 0;
+ } else if (id_len == 6 && id_data[0] == NAND_MFR_HYNIX &&
+ (chip->cellinfo & NAND_CI_CELLTYPE_MSK)) {
+ unsigned int tmp;
+
+ /* Calc pagesize */
+ mtd->writesize = 2048 << (extid & 0x03);
+ extid >>= 2;
+ /* Calc oobsize */
+ switch (((extid >> 2) & 0x04) | (extid & 0x03)) {
+ case 0:
+ mtd->oobsize = 128;
+ break;
+ case 1:
+ mtd->oobsize = 224;
+ break;
+ case 2:
+ mtd->oobsize = 448;
+ break;
+ case 3:
+ mtd->oobsize = 64;
+ break;
+ case 4:
+ mtd->oobsize = 32;
+ break;
+ case 5:
+ mtd->oobsize = 16;
+ break;
+ default:
+ mtd->oobsize = 640;
+ break;
+ }
+ extid >>= 2;
+ /* Calc blocksize */
+ tmp = ((extid >> 1) & 0x04) | (extid & 0x03);
+ if (tmp < 0x03)
+ mtd->erasesize = (128 * 1024) << tmp;
+ else if (tmp == 0x03)
+ mtd->erasesize = 768 * 1024;
+ else
+ mtd->erasesize = (64 * 1024) << tmp;
+ *busw = 0;
+ } else {
+ /* Calc pagesize */
+ mtd->writesize = 1024 << (extid & 0x03);
+ extid >>= 2;
+ /* Calc oobsize */
+ mtd->oobsize = (8 << (extid & 0x01)) *
+ (mtd->writesize >> 9);
+ extid >>= 2;
+ /* Calc blocksize. Blocksize is multiples of 64KiB */
+ mtd->erasesize = (64 * 1024) << (extid & 0x03);
+ extid >>= 2;
+ /* Get buswidth information */
+ *busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0;
+ }
+}
+
+ /*
+ * Old devices have chip data hardcoded in the device ID table. nand_decode_id
+ * decodes a matching ID table entry and assigns the MTD size parameters for
+ * the chip.
+ */
+static void nand_decode_id(struct mtd_info *mtd, struct nand_chip *chip,
+ const struct nand_flash_dev *type, u8 id_data[8],
+ int *busw)
+{
+ int maf_id = id_data[0];
+
+ mtd->erasesize = type->erasesize;
+ mtd->writesize = type->pagesize;
+ mtd->oobsize = mtd->writesize / 32;
+ *busw = type->options & NAND_BUSWIDTH_16;
+
+ /*
+ * Check for Spansion/AMD ID + repeating 5th, 6th byte since
+ * some Spansion chips have erasesize that conflicts with size
+ * listed in nand_ids table.
+ * Data sheet (5 byte ID): Spansion S30ML-P ORNAND (p.39)
+ */
+ if (maf_id == NAND_MFR_AMD && id_data[4] != 0x00 && id_data[5] == 0x00
+ && id_data[6] == 0x00 && id_data[7] == 0x00
+ && mtd->writesize == 512) {
+ mtd->erasesize = 128 * 1024;
+ mtd->erasesize <<= ((id_data[3] & 0x03) << 1);
+ }
+}
+
+ /*
+ * Set the bad block marker/indicator (BBM/BBI) patterns according to some
+ * heuristic patterns using various detected parameters (e.g., manufacturer,
+ * page size, cell-type information).
+ */
+static void nand_decode_bbm_options(struct mtd_info *mtd,
+ struct nand_chip *chip, u8 id_data[8])
+{
+ int maf_id = id_data[0];
+
+ /* Set the bad block position */
+ if (mtd->writesize > 512 || (chip->options & NAND_BUSWIDTH_16))
+ chip->badblockpos = NAND_LARGE_BADBLOCK_POS;
+ else
+ chip->badblockpos = NAND_SMALL_BADBLOCK_POS;
+
+ /*
+ * Bad block marker is stored in the last page of each block on Samsung
+ * and Hynix MLC devices; stored in first two pages of each block on
+ * Micron devices with 2KiB pages and on SLC Samsung, Hynix, Toshiba,
+ * AMD/Spansion, and Macronix. All others scan only the first page.
+ */
+ if ((chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
+ (maf_id == NAND_MFR_SAMSUNG ||
+ maf_id == NAND_MFR_HYNIX))
+ chip->bbt_options |= NAND_BBT_SCANLASTPAGE;
+ else if ((!(chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
+ (maf_id == NAND_MFR_SAMSUNG ||
+ maf_id == NAND_MFR_HYNIX ||
+ maf_id == NAND_MFR_TOSHIBA ||
+ maf_id == NAND_MFR_AMD ||
+ maf_id == NAND_MFR_MACRONIX)) ||
+ (mtd->writesize == 2048 &&
+ maf_id == NAND_MFR_MICRON))
+ chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
+}
+
+/*
+ * Get the flash and manufacturer id and lookup if the type is supported.
*/
static const struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
struct nand_chip *chip,
@@ -2605,14 +2892,13 @@
const char *name;
int i, maf_idx;
u8 id_data[8];
- int ret;
/* Select the device */
chip->select_chip(mtd, 0);
/*
* Reset the chip, required by some chips (e.g. Micron MT29FxGxxxxx)
- * after power-up
+ * after power-up.
*/
chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
@@ -2623,7 +2909,8 @@
*maf_id = chip->read_byte(mtd);
*dev_id = chip->read_byte(mtd);
- /* Try again to make sure, as some systems the bus-hold or other
+ /*
+ * Try again to make sure, as some systems the bus-hold or other
* interface concerns can cause random data which looks like a
* possibly credible NAND flash to appear. If the two results do
* not match, ignore the device completely.
@@ -2631,13 +2918,14 @@
chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
- for (i = 0; i < 2; i++)
+ /* Read entire ID string */
+ for (i = 0; i < 8; i++)
id_data[i] = chip->read_byte(mtd);
if (id_data[0] != *maf_id || id_data[1] != *dev_id) {
- printk(KERN_INFO "%s: second ID read did not match "
- "%02x,%02x against %02x,%02x\n", __func__,
- *maf_id, *dev_id, id_data[0], id_data[1]);
+ pr_info("%s: second ID read did not match "
+ "%02x,%02x against %02x,%02x\n", __func__,
+ *maf_id, *dev_id, id_data[0], id_data[1]);
return ERR_PTR(-ENODEV);
}
@@ -2651,18 +2939,10 @@
chip->onfi_version = 0;
if (!type->name || !type->pagesize) {
/* Check is chip is ONFI compliant */
- ret = nand_flash_detect_onfi(mtd, chip, &busw);
- if (ret)
+ if (nand_flash_detect_onfi(mtd, chip, &busw))
goto ident_done;
}
- chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
-
- /* Read entire ID string */
-
- for (i = 0; i < 8; i++)
- id_data[i] = chip->read_byte(mtd);
-
if (!type->name)
return ERR_PTR(-ENODEV);
@@ -2672,101 +2952,25 @@
chip->chipsize = (uint64_t)type->chipsize << 20;
if (!type->pagesize && chip->init_size) {
- /* set the pagesize, oobsize, erasesize by the driver*/
+ /* Set the pagesize, oobsize, erasesize by the driver */
busw = chip->init_size(mtd, chip, id_data);
} else if (!type->pagesize) {
- int extid;
- /* The 3rd id byte holds MLC / multichip data */
- chip->cellinfo = id_data[2];
- /* The 4th id byte is the important one */
- extid = id_data[3];
-
- /*
- * Field definitions are in the following datasheets:
- * Old style (4,5 byte ID): Samsung K9GAG08U0M (p.32)
- * New style (6 byte ID): Samsung K9GBG08U0M (p.40)
- *
- * Check for wraparound + Samsung ID + nonzero 6th byte
- * to decide what to do.
- */
- if (id_data[0] == id_data[6] && id_data[1] == id_data[7] &&
- id_data[0] == NAND_MFR_SAMSUNG &&
- (chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
- id_data[5] != 0x00) {
- /* Calc pagesize */
- mtd->writesize = 2048 << (extid & 0x03);
- extid >>= 2;
- /* Calc oobsize */
- switch (extid & 0x03) {
- case 1:
- mtd->oobsize = 128;
- break;
- case 2:
- mtd->oobsize = 218;
- break;
- case 3:
- mtd->oobsize = 400;
- break;
- default:
- mtd->oobsize = 436;
- break;
- }
- extid >>= 2;
- /* Calc blocksize */
- mtd->erasesize = (128 * 1024) <<
- (((extid >> 1) & 0x04) | (extid & 0x03));
- busw = 0;
- } else {
- /* Calc pagesize */
- mtd->writesize = 1024 << (extid & 0x03);
- extid >>= 2;
- /* Calc oobsize */
- mtd->oobsize = (8 << (extid & 0x01)) *
- (mtd->writesize >> 9);
- extid >>= 2;
- /* Calc blocksize. Blocksize is multiples of 64KiB */
- mtd->erasesize = (64 * 1024) << (extid & 0x03);
- extid >>= 2;
- /* Get buswidth information */
- busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0;
- }
+ /* Decode parameters from extended ID */
+ nand_decode_ext_id(mtd, chip, id_data, &busw);
} else {
- /*
- * Old devices have chip data hardcoded in the device id table
- */
- mtd->erasesize = type->erasesize;
- mtd->writesize = type->pagesize;
- mtd->oobsize = mtd->writesize / 32;
- busw = type->options & NAND_BUSWIDTH_16;
-
- /*
- * Check for Spansion/AMD ID + repeating 5th, 6th byte since
- * some Spansion chips have erasesize that conflicts with size
- * listed in nand_ids table
- * Data sheet (5 byte ID): Spansion S30ML-P ORNAND (p.39)
- */
- if (*maf_id == NAND_MFR_AMD && id_data[4] != 0x00 &&
- id_data[5] == 0x00 && id_data[6] == 0x00 &&
- id_data[7] == 0x00 && mtd->writesize == 512) {
- mtd->erasesize = 128 * 1024;
- mtd->erasesize <<= ((id_data[3] & 0x03) << 1);
- }
+ nand_decode_id(mtd, chip, type, id_data, &busw);
}
/* Get chip options, preserve non chip based options */
chip->options |= type->options;
- /* Check if chip is a not a samsung device. Do not clear the
- * options for chips which are not having an extended id.
+ /*
+ * Check if chip is not a Samsung device. Do not clear the
+ * options for chips which do not have an extended id.
*/
if (*maf_id != NAND_MFR_SAMSUNG && !type->pagesize)
chip->options &= ~NAND_SAMSUNG_LP_OPTIONS;
ident_done:
- /*
- * Set chip as a default. Board drivers can override it, if necessary
- */
- chip->options |= NAND_NO_AUTOINCR;
-
/* Try to identify manufacturer */
for (maf_idx = 0; nand_manuf_ids[maf_idx].id != 0x0; maf_idx++) {
if (nand_manuf_ids[maf_idx].id == *maf_id)
@@ -2775,21 +2979,23 @@
/*
* Check, if buswidth is correct. Hardware drivers should set
- * chip correct !
+ * chip correct!
*/
if (busw != (chip->options & NAND_BUSWIDTH_16)) {
- printk(KERN_INFO "NAND device: Manufacturer ID:"
- " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id,
- *dev_id, nand_manuf_ids[maf_idx].name, mtd->name);
- printk(KERN_WARNING "NAND bus width %d instead %d bit\n",
- (chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
- busw ? 16 : 8);
+ pr_info("NAND device: Manufacturer ID:"
+ " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id,
+ *dev_id, nand_manuf_ids[maf_idx].name, mtd->name);
+ pr_warn("NAND bus width %d instead %d bit\n",
+ (chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
+ busw ? 16 : 8);
return ERR_PTR(-EINVAL);
}
+ nand_decode_bbm_options(mtd, chip, id_data);
+
/* Calculate the address shift from the page size */
chip->page_shift = ffs(mtd->writesize) - 1;
- /* Convert chipsize to number of pages per chip -1. */
+ /* Convert chipsize to number of pages per chip -1 */
chip->pagemask = (chip->chipsize >> chip->page_shift) - 1;
chip->bbt_erase_shift = chip->phys_erase_shift =
@@ -2803,73 +3009,38 @@
chip->badblockbits = 8;
- /* Set the bad block position */
- if (mtd->writesize > 512 || (busw & NAND_BUSWIDTH_16))
- chip->badblockpos = NAND_LARGE_BADBLOCK_POS;
- else
- chip->badblockpos = NAND_SMALL_BADBLOCK_POS;
-
- /*
- * Bad block marker is stored in the last page of each block
- * on Samsung and Hynix MLC devices; stored in first two pages
- * of each block on Micron devices with 2KiB pages and on
- * SLC Samsung, Hynix, Toshiba and AMD/Spansion. All others scan
- * only the first page.
- */
- if ((chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
- (*maf_id == NAND_MFR_SAMSUNG ||
- *maf_id == NAND_MFR_HYNIX))
- chip->options |= NAND_BBT_SCANLASTPAGE;
- else if ((!(chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
- (*maf_id == NAND_MFR_SAMSUNG ||
- *maf_id == NAND_MFR_HYNIX ||
- *maf_id == NAND_MFR_TOSHIBA ||
- *maf_id == NAND_MFR_AMD)) ||
- (mtd->writesize == 2048 &&
- *maf_id == NAND_MFR_MICRON))
- chip->options |= NAND_BBT_SCAN2NDPAGE;
-
- /*
- * Numonyx/ST 2K pages, x8 bus use BOTH byte 1 and 6
- */
- if (!(busw & NAND_BUSWIDTH_16) &&
- *maf_id == NAND_MFR_STMICRO &&
- mtd->writesize == 2048) {
- chip->options |= NAND_BBT_SCANBYTE1AND6;
- chip->badblockpos = 0;
- }
-
/* Check for AND chips with 4 page planes */
if (chip->options & NAND_4PAGE_ARRAY)
chip->erase_cmd = multi_erase_cmd;
else
chip->erase_cmd = single_erase_cmd;
- /* Do not replace user supplied command function ! */
+ /* Do not replace user supplied command function! */
if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
chip->cmdfunc = nand_command_lp;
- /* TODO onfi flash name */
name = type->name;
#ifdef CONFIG_SYS_NAND_ONFI_DETECTION
if (chip->onfi_version)
name = chip->onfi_params.model;
#endif
- MTDDEBUG(MTD_DEBUG_LEVEL0, "NAND device: Manufacturer ID:"
- " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, *dev_id,
- nand_manuf_ids[maf_idx].name, name);
+ pr_info("NAND device: Manufacturer ID: 0x%02x, Chip ID: 0x%02x (%s %s),"
+ " page size: %d, OOB size: %d\n",
+ *maf_id, *dev_id, nand_manuf_ids[maf_idx].name,
+ name,
+ mtd->writesize, mtd->oobsize);
return type;
}
/**
* nand_scan_ident - [NAND Interface] Scan for the NAND device
- * @mtd: MTD device structure
- * @maxchips: Number of chips to scan for
- * @table: Alternative NAND ID table
+ * @mtd: MTD device structure
+ * @maxchips: number of chips to scan for
+ * @table: alternative NAND ID table
*
- * This is the first phase of the normal nand_scan() function. It
- * reads the flash ID and sets up MTD fields accordingly.
+ * This is the first phase of the normal nand_scan() function. It reads the
+ * flash ID and sets up MTD fields accordingly.
*
* The mtd->owner field must be set to the module of the caller.
*/
@@ -2891,7 +3062,7 @@
if (IS_ERR(type)) {
#ifndef CONFIG_SYS_NAND_QUIET_TEST
- printk(KERN_WARNING "No NAND device found!!!\n");
+ pr_warn("No NAND device found\n");
#endif
chip->select_chip(mtd, -1);
return PTR_ERR(type);
@@ -2911,7 +3082,7 @@
}
#ifdef DEBUG
if (i > 1)
- printk(KERN_INFO "%d NAND chips detected\n", i);
+ pr_info("%d NAND chips detected\n", i);
#endif
/* Store the number of chips and calc total size for mtd */
@@ -2924,17 +3095,21 @@
/**
* nand_scan_tail - [NAND Interface] Scan for the NAND device
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*
- * This is the second phase of the normal nand_scan() function. It
- * fills out all the uninitialized function pointers with the defaults
- * and scans for a bad block table if appropriate.
+ * This is the second phase of the normal nand_scan() function. It fills out
+ * all the uninitialized function pointers with the defaults and scans for a
+ * bad block table if appropriate.
*/
int nand_scan_tail(struct mtd_info *mtd)
{
int i;
struct nand_chip *chip = mtd->priv;
+ /* New bad blocks should be marked in OOB, flash-based BBT, or both */
+ BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) &&
+ !(chip->bbt_options & NAND_BBT_USE_FLASH));
+
if (!(chip->options & NAND_OWN_BUFFERS))
chip->buffers = memalign(ARCH_DMA_MINALIGN,
sizeof(*chip->buffers));
@@ -2945,7 +3120,7 @@
chip->oob_poi = chip->buffers->databuf + mtd->writesize;
/*
- * If no default placement scheme is given, select an appropriate one
+ * If no default placement scheme is given, select an appropriate one.
*/
if (!chip->ecc.layout && (chip->ecc.mode != NAND_ECC_SOFT_BCH)) {
switch (mtd->oobsize) {
@@ -2962,16 +3137,22 @@
chip->ecc.layout = &nand_oob_128;
break;
default:
- printk(KERN_WARNING "No oob scheme defined for "
- "oobsize %d\n", mtd->oobsize);
+ pr_warn("No oob scheme defined for oobsize %d\n",
+ mtd->oobsize);
}
}
if (!chip->write_page)
chip->write_page = nand_write_page;
+ /* set for ONFI nand */
+ if (!chip->onfi_set_features)
+ chip->onfi_set_features = nand_onfi_set_features;
+ if (!chip->onfi_get_features)
+ chip->onfi_get_features = nand_onfi_get_features;
+
/*
- * check ECC mode, default to software if 3byte/512byte hardware ECC is
+ * Check ECC mode, default to software if 3byte/512byte hardware ECC is
* selected and we have 256 byte pagesize fallback to software ECC
*/
@@ -2980,15 +3161,15 @@
/* Similar to NAND_ECC_HW, but a separate read_page handle */
if (!chip->ecc.calculate || !chip->ecc.correct ||
!chip->ecc.hwctl) {
- printk(KERN_WARNING "No ECC functions supplied; "
- "Hardware ECC not possible\n");
+ pr_warn("No ECC functions supplied; "
+ "hardware ECC not possible\n");
BUG();
}
if (!chip->ecc.read_page)
chip->ecc.read_page = nand_read_page_hwecc_oob_first;
case NAND_ECC_HW:
- /* Use standard hwecc read page function ? */
+ /* Use standard hwecc read page function? */
if (!chip->ecc.read_page)
chip->ecc.read_page = nand_read_page_hwecc;
if (!chip->ecc.write_page)
@@ -3009,11 +3190,11 @@
chip->ecc.read_page == nand_read_page_hwecc ||
!chip->ecc.write_page ||
chip->ecc.write_page == nand_write_page_hwecc)) {
- printk(KERN_WARNING "No ECC functions supplied; "
- "Hardware ECC not possible\n");
+ pr_warn("No ECC functions supplied; "
+ "hardware ECC not possible\n");
BUG();
}
- /* Use standard syndrome read/write page function ? */
+ /* Use standard syndrome read/write page function? */
if (!chip->ecc.read_page)
chip->ecc.read_page = nand_read_page_syndrome;
if (!chip->ecc.write_page)
@@ -3027,11 +3208,16 @@
if (!chip->ecc.write_oob)
chip->ecc.write_oob = nand_write_oob_syndrome;
- if (mtd->writesize >= chip->ecc.size)
+ if (mtd->writesize >= chip->ecc.size) {
+ if (!chip->ecc.strength) {
+ pr_warn("Driver must set ecc.strength when using hardware ECC\n");
+ BUG();
+ }
break;
- printk(KERN_WARNING "%d byte HW ECC not possible on "
- "%d byte page size, fallback to SW ECC\n",
- chip->ecc.size, mtd->writesize);
+ }
+ pr_warn("%d byte HW ECC not possible on "
+ "%d byte page size, fallback to SW ECC\n",
+ chip->ecc.size, mtd->writesize);
chip->ecc.mode = NAND_ECC_SOFT;
case NAND_ECC_SOFT:
@@ -3047,11 +3233,12 @@
if (!chip->ecc.size)
chip->ecc.size = 256;
chip->ecc.bytes = 3;
+ chip->ecc.strength = 1;
break;
case NAND_ECC_SOFT_BCH:
if (!mtd_nand_has_bch()) {
- printk(KERN_WARNING "CONFIG_MTD_ECC_BCH not enabled\n");
+ pr_warn("CONFIG_MTD_ECC_BCH not enabled\n");
return -EINVAL;
}
chip->ecc.calculate = nand_bch_calculate_ecc;
@@ -3066,8 +3253,8 @@
/*
* Board driver should supply ecc.size and ecc.bytes values to
* select how many bits are correctable; see nand_bch_init()
- * for details.
- * Otherwise, default to 4 bits for large page devices
+ * for details. Otherwise, default to 4 bits for large page
+ * devices.
*/
if (!chip->ecc.size && (mtd->oobsize >= 64)) {
chip->ecc.size = 512;
@@ -3078,13 +3265,14 @@
chip->ecc.bytes,
&chip->ecc.layout);
if (!chip->ecc.priv)
- printk(KERN_WARNING "BCH ECC initialization failed!\n");
-
+ pr_warn("BCH ECC initialization failed!\n");
+ chip->ecc.strength =
+ chip->ecc.bytes * 8 / fls(8 * chip->ecc.size);
break;
case NAND_ECC_NONE:
- printk(KERN_WARNING "NAND_ECC_NONE selected by board driver. "
- "This is not recommended !!\n");
+ pr_warn("NAND_ECC_NONE selected by board driver. "
+ "This is not recommended !!\n");
chip->ecc.read_page = nand_read_page_raw;
chip->ecc.write_page = nand_write_page_raw;
chip->ecc.read_oob = nand_read_oob_std;
@@ -3096,14 +3284,19 @@
break;
default:
- printk(KERN_WARNING "Invalid NAND_ECC_MODE %d\n",
- chip->ecc.mode);
+ pr_warn("Invalid NAND_ECC_MODE %d\n", chip->ecc.mode);
BUG();
}
+ /* For many systems, the standard OOB write also works for raw */
+ if (!chip->ecc.read_oob_raw)
+ chip->ecc.read_oob_raw = chip->ecc.read_oob;
+ if (!chip->ecc.write_oob_raw)
+ chip->ecc.write_oob_raw = chip->ecc.write_oob;
+
/*
* The number of bytes available for a client to place data into
- * the out of band area
+ * the out of band area.
*/
chip->ecc.layout->oobavail = 0;
for (i = 0; chip->ecc.layout->oobfree[i].length
@@ -3114,19 +3307,16 @@
/*
* Set the number of read / write steps for one page depending on ECC
- * mode
+ * mode.
*/
chip->ecc.steps = mtd->writesize / chip->ecc.size;
if (chip->ecc.steps * chip->ecc.size != mtd->writesize) {
- printk(KERN_WARNING "Invalid ecc parameters\n");
+ pr_warn("Invalid ECC parameters\n");
BUG();
}
chip->ecc.total = chip->ecc.steps * chip->ecc.bytes;
- /*
- * Allow subpage writes up to ecc.steps. Not possible for MLC
- * FLASH.
- */
+ /* Allow subpage writes up to ecc.steps. Not possible for MLC flash */
if (!(chip->options & NAND_NO_SUBPAGE_WRITE) &&
!(chip->cellinfo & NAND_CI_CELLTYPE_MSK)) {
switch (chip->ecc.steps) {
@@ -3159,21 +3349,29 @@
mtd->type = MTD_NANDFLASH;
mtd->flags = (chip->options & NAND_ROM) ? MTD_CAP_ROM :
MTD_CAP_NANDFLASH;
- mtd->erase = nand_erase;
- mtd->point = NULL;
- mtd->unpoint = NULL;
- mtd->read = nand_read;
- mtd->write = nand_write;
- mtd->read_oob = nand_read_oob;
- mtd->write_oob = nand_write_oob;
- mtd->sync = nand_sync;
- mtd->lock = NULL;
- mtd->unlock = NULL;
- mtd->block_isbad = nand_block_isbad;
- mtd->block_markbad = nand_block_markbad;
+ mtd->_erase = nand_erase;
+ mtd->_point = NULL;
+ mtd->_unpoint = NULL;
+ mtd->_read = nand_read;
+ mtd->_write = nand_write;
+ mtd->_read_oob = nand_read_oob;
+ mtd->_write_oob = nand_write_oob;
+ mtd->_sync = nand_sync;
+ mtd->_lock = NULL;
+ mtd->_unlock = NULL;
+ mtd->_block_isbad = nand_block_isbad;
+ mtd->_block_markbad = nand_block_markbad;
- /* propagate ecc.layout to mtd_info */
+ /* propagate ecc info to mtd_info */
mtd->ecclayout = chip->ecc.layout;
+ mtd->ecc_strength = chip->ecc.strength;
+ /*
+ * Initialize bitflip_threshold to its default prior scan_bbt() call.
+ * scan_bbt() might invoke mtd_read(), thus bitflip_threshold must be
+ * properly set.
+ */
+ if (!mtd->bitflip_threshold)
+ mtd->bitflip_threshold = mtd->ecc_strength;
/* Check, if we should skip the bad block table scan */
if (chip->options & NAND_SKIP_BBTSCAN)
@@ -3184,15 +3382,13 @@
/**
* nand_scan - [NAND Interface] Scan for the NAND device
- * @mtd: MTD device structure
- * @maxchips: Number of chips to scan for
+ * @mtd: MTD device structure
+ * @maxchips: number of chips to scan for
*
- * This fills out all the uninitialized function pointers
- * with the defaults.
- * The flash ID is read and the mtd/chip structures are
- * filled with the appropriate values.
- * The mtd->owner field must be set to the module of the caller
- *
+ * This fills out all the uninitialized function pointers with the defaults.
+ * The flash ID is read and the mtd/chip structures are filled with the
+ * appropriate values. The mtd->owner field must be set to the module of the
+ * caller.
*/
int nand_scan(struct mtd_info *mtd, int maxchips)
{
@@ -3206,8 +3402,8 @@
/**
* nand_release - [NAND Interface] Free resources held by the NAND device
- * @mtd: MTD device structure
-*/
+ * @mtd: MTD device structure
+ */
void nand_release(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index 74a7061..8ef5845 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -4,7 +4,7 @@
* Overview:
* Bad block table support for the NAND driver
*
- * Copyright (C) 2004 Thomas Gleixner (tglx@linutronix.de)
+ * Copyright © 2004 Thomas Gleixner (tglx@linutronix.de)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -14,7 +14,7 @@
*
* When nand_scan_bbt is called, then it tries to find the bad block table
* depending on the options in the BBT descriptor(s). If no flash based BBT
- * (NAND_USE_FLASH_BBT) is specified then the device is scanned for factory
+ * (NAND_BBT_USE_FLASH) is specified then the device is scanned for factory
* marked good / bad blocks. This information is used to create a memory BBT.
* Once a new bad block is discovered then the "factory" information is updated
* on the device.
@@ -22,7 +22,7 @@
* BBT on flash. If a BBT is found then the contents are read and the memory
* based BBT is created. If a mirrored BBT is selected then the mirror is
* searched too and the versions are compared. If the mirror has a greater
- * version number than the mirror BBT is used to build the memory based BBT.
+ * version number, then the mirror BBT is used to build the memory based BBT.
* If the tables are not versioned, then we "or" the bad block information.
* If one of the BBTs is out of date or does not exist it is (re)created.
* If no BBT exists at all then the device is scanned for factory marked
@@ -36,9 +36,9 @@
* The table is marked in the OOB area with an ident pattern and a version
* number which indicates which of both tables is more up to date. If the NAND
* controller needs the complete OOB area for the ECC information then the
- * option NAND_USE_FLASH_BBT_NO_OOB should be used: it moves the ident pattern
- * and the version byte into the data area and the OOB area will remain
- * untouched.
+ * option NAND_BBT_NO_OOB should be used (along with NAND_BBT_USE_FLASH, of
+ * course): it moves the ident pattern and the version byte into the data area
+ * and the OOB area will remain untouched.
*
* The table uses 2 bits per block
* 11b: block is good
@@ -63,126 +63,81 @@
#include <malloc.h>
#include <linux/compat.h>
#include <linux/mtd/mtd.h>
+#include <linux/mtd/bbm.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/bitops.h>
+#include <linux/string.h>
#include <asm/errno.h>
static int check_pattern_no_oob(uint8_t *buf, struct nand_bbt_descr *td)
{
- int ret;
-
- ret = memcmp(buf, td->pattern, td->len);
- if (!ret)
- return ret;
- return -1;
+ if (memcmp(buf, td->pattern, td->len))
+ return -1;
+ return 0;
}
/**
* check_pattern - [GENERIC] check if a pattern is in the buffer
- * @buf: the buffer to search
- * @len: the length of buffer to search
- * @paglen: the pagelength
- * @td: search pattern descriptor
+ * @buf: the buffer to search
+ * @len: the length of buffer to search
+ * @paglen: the pagelength
+ * @td: search pattern descriptor
*
- * Check for a pattern at the given place. Used to search bad block
- * tables and good / bad block identifiers.
- * If the SCAN_EMPTY option is set then check, if all bytes except the
- * pattern area contain 0xff
- *
-*/
+ * Check for a pattern at the given place. Used to search bad block tables and
+ * good / bad block identifiers. If the SCAN_EMPTY option is set then check, if
+ * all bytes except the pattern area contain 0xff.
+ */
static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td)
{
- int i, end = 0;
+ int end = 0;
uint8_t *p = buf;
if (td->options & NAND_BBT_NO_OOB)
return check_pattern_no_oob(buf, td);
end = paglen + td->offs;
- if (td->options & NAND_BBT_SCANEMPTY) {
- for (i = 0; i < end; i++) {
- if (p[i] != 0xff)
- return -1;
- }
- }
+ if (td->options & NAND_BBT_SCANEMPTY)
+ if (memchr_inv(p, 0xff, end))
+ return -1;
p += end;
/* Compare the pattern */
- for (i = 0; i < td->len; i++) {
- if (p[i] != td->pattern[i])
- return -1;
- }
-
- /* Check both positions 1 and 6 for pattern? */
- if (td->options & NAND_BBT_SCANBYTE1AND6) {
- if (td->options & NAND_BBT_SCANEMPTY) {
- p += td->len;
- end += NAND_SMALL_BADBLOCK_POS - td->offs;
- /* Check region between positions 1 and 6 */
- for (i = 0; i < NAND_SMALL_BADBLOCK_POS - td->offs - td->len;
- i++) {
- if (*p++ != 0xff)
- return -1;
- }
- }
- else {
- p += NAND_SMALL_BADBLOCK_POS - td->offs;
- }
- /* Compare the pattern */
- for (i = 0; i < td->len; i++) {
- if (p[i] != td->pattern[i])
- return -1;
- }
- }
+ if (memcmp(p, td->pattern, td->len))
+ return -1;
if (td->options & NAND_BBT_SCANEMPTY) {
p += td->len;
end += td->len;
- for (i = end; i < len; i++) {
- if (*p++ != 0xff)
- return -1;
- }
+ if (memchr_inv(p, 0xff, len - end))
+ return -1;
}
return 0;
}
/**
* check_short_pattern - [GENERIC] check if a pattern is in the buffer
- * @buf: the buffer to search
- * @td: search pattern descriptor
+ * @buf: the buffer to search
+ * @td: search pattern descriptor
*
- * Check for a pattern at the given place. Used to search bad block
- * tables and good / bad block identifiers. Same as check_pattern, but
- * no optional empty check
- *
-*/
+ * Check for a pattern at the given place. Used to search bad block tables and
+ * good / bad block identifiers. Same as check_pattern, but no optional empty
+ * check.
+ */
static int check_short_pattern(uint8_t *buf, struct nand_bbt_descr *td)
{
- int i;
- uint8_t *p = buf;
-
/* Compare the pattern */
- for (i = 0; i < td->len; i++) {
- if (p[td->offs + i] != td->pattern[i])
- return -1;
- }
- /* Need to check location 1 AND 6? */
- if (td->options & NAND_BBT_SCANBYTE1AND6) {
- for (i = 0; i < td->len; i++) {
- if (p[NAND_SMALL_BADBLOCK_POS + i] != td->pattern[i])
- return -1;
- }
- }
+ if (memcmp(buf + td->offs, td->pattern, td->len))
+ return -1;
return 0;
}
/**
* add_marker_len - compute the length of the marker in data area
- * @td: BBT descriptor used for computation
+ * @td: BBT descriptor used for computation
*
- * The length will be 0 if the markeris located in OOB area.
+ * The length will be 0 if the marker is located in OOB area.
*/
static u32 add_marker_len(struct nand_bbt_descr *td)
{
@@ -199,34 +154,33 @@
/**
* read_bbt - [GENERIC] Read the bad block table starting from page
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @page: the starting page
- * @num: the number of bbt descriptors to read
- * @td: the bbt describtion table
- * @offs: offset in the memory table
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @page: the starting page
+ * @num: the number of bbt descriptors to read
+ * @td: the bbt describtion table
+ * @offs: offset in the memory table
*
* Read the bad block table starting from page.
- *
*/
static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num,
struct nand_bbt_descr *td, int offs)
{
- int res, i, j, act = 0;
+ int res, ret = 0, i, j, act = 0;
struct nand_chip *this = mtd->priv;
size_t retlen, len, totlen;
loff_t from;
int bits = td->options & NAND_BBT_NRBITS_MSK;
- uint8_t msk = (uint8_t) ((1 << bits) - 1);
+ uint8_t msk = (uint8_t)((1 << bits) - 1);
u32 marker_len;
int reserved_block_code = td->reserved_block_code;
totlen = (num * bits) >> 3;
marker_len = add_marker_len(td);
- from = ((loff_t) page) << this->page_shift;
+ from = ((loff_t)page) << this->page_shift;
while (totlen) {
- len = min(totlen, (size_t) (1 << this->bbt_erase_shift));
+ len = min(totlen, (size_t)(1 << this->bbt_erase_shift));
if (marker_len) {
/*
* In case the BBT marker is not in the OOB area it
@@ -236,13 +190,20 @@
from += marker_len;
marker_len = 0;
}
- res = mtd->read(mtd, from, len, &retlen, buf);
+ res = mtd_read(mtd, from, len, &retlen, buf);
if (res < 0) {
- if (retlen != len) {
- printk(KERN_INFO "nand_bbt: Error reading bad block table\n");
+ if (mtd_is_eccerr(res)) {
+ pr_info("nand_bbt: ECC error in BBT at "
+ "0x%012llx\n", from & ~mtd->writesize);
+ return res;
+ } else if (mtd_is_bitflip(res)) {
+ pr_info("nand_bbt: corrected error in BBT at "
+ "0x%012llx\n", from & ~mtd->writesize);
+ ret = res;
+ } else {
+ pr_info("nand_bbt: error reading BBT\n");
return res;
}
- printk(KERN_WARNING "nand_bbt: ECC error while reading bad block table\n");
}
/* Analyse data */
@@ -253,17 +214,16 @@
if (tmp == msk)
continue;
if (reserved_block_code && (tmp == reserved_block_code)) {
- printk(KERN_DEBUG "nand_read_bbt: Reserved block at 0x%012llx\n",
- (loff_t)((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
+ pr_info("nand_read_bbt: reserved block at 0x%012llx\n",
+ (loff_t)((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
this->bbt[offs + (act >> 3)] |= 0x2 << (act & 0x06);
mtd->ecc_stats.bbtblocks++;
continue;
}
- MTDDEBUG(MTD_DEBUG_LEVEL0, "nand_read_bbt: " \
- "Bad block at 0x%012llx\n",
+ pr_info("nand_read_bbt: Bad block at 0x%012llx\n",
(loff_t)((offs << 2) + (act >> 1))
<< this->bbt_erase_shift);
- /* Factory marked bad or worn out ? */
+ /* Factory marked bad or worn out? */
if (tmp == 0)
this->bbt[offs + (act >> 3)] |= 0x3 << (act & 0x06);
else
@@ -274,20 +234,20 @@
totlen -= len;
from += len;
}
- return 0;
+ return ret;
}
/**
* read_abs_bbt - [GENERIC] Read the bad block table starting at a given page
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @td: descriptor for the bad block table
- * @chip: read the table for a specific chip, -1 read all chips.
- * Applies only if NAND_BBT_PERCHIP option is set
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ * @chip: read the table for a specific chip, -1 read all chips; applies only if
+ * NAND_BBT_PERCHIP option is set
*
- * Read the bad block table for all chips starting at a given page
- * We assume that the bbt bits are in consecutive order.
-*/
+ * Read the bad block table for all chips starting at a given page. We assume
+ * that the bbt bits are in consecutive order.
+ */
static int read_abs_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, int chip)
{
struct nand_chip *this = mtd->priv;
@@ -313,10 +273,8 @@
return 0;
}
-/*
- * BBT marker is in the first page, no OOB.
- */
-static int scan_read_raw_data(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
+/* BBT marker is in the first page, no OOB */
+static int scan_read_data(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
struct nand_bbt_descr *td)
{
size_t retlen;
@@ -326,70 +284,73 @@
if (td->options & NAND_BBT_VERSION)
len++;
- return mtd->read(mtd, offs, len, &retlen, buf);
+ return mtd_read(mtd, offs, len, &retlen, buf);
}
-/*
- * Scan read raw data from flash
+/**
+ * scan_read_oob - [GENERIC] Scan data+OOB region to buffer
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @offs: offset at which to scan
+ * @len: length of data region to read
+ *
+ * Scan read data from data+OOB. May traverse multiple pages, interleaving
+ * page,OOB,page,OOB,... in buf. Completes transfer and returns the "strongest"
+ * ECC condition (error or bitflip). May quit on the first (non-ECC) error.
*/
-static int scan_read_raw_oob(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
+static int scan_read_oob(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
size_t len)
{
struct mtd_oob_ops ops;
- int res;
+ int res, ret = 0;
- ops.mode = MTD_OOB_RAW;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooboffs = 0;
ops.ooblen = mtd->oobsize;
-
while (len > 0) {
- if (len <= mtd->writesize) {
- ops.oobbuf = buf + len;
- ops.datbuf = buf;
- ops.len = len;
- return mtd->read_oob(mtd, offs, &ops);
- } else {
- ops.oobbuf = buf + mtd->writesize;
- ops.datbuf = buf;
- ops.len = mtd->writesize;
- res = mtd->read_oob(mtd, offs, &ops);
+ ops.datbuf = buf;
+ ops.len = min(len, (size_t)mtd->writesize);
+ ops.oobbuf = buf + ops.len;
- if (res)
+ res = mtd_read_oob(mtd, offs, &ops);
+ if (res) {
+ if (!mtd_is_bitflip_or_eccerr(res))
return res;
+ else if (mtd_is_eccerr(res) || !ret)
+ ret = res;
}
buf += mtd->oobsize + mtd->writesize;
len -= mtd->writesize;
+ offs += mtd->writesize;
}
- return 0;
+ return ret;
}
-static int scan_read_raw(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
+static int scan_read(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
size_t len, struct nand_bbt_descr *td)
{
if (td->options & NAND_BBT_NO_OOB)
- return scan_read_raw_data(mtd, buf, offs, td);
+ return scan_read_data(mtd, buf, offs, td);
else
- return scan_read_raw_oob(mtd, buf, offs, len);
+ return scan_read_oob(mtd, buf, offs, len);
}
-/*
- * Scan write data with oob to flash
- */
+/* Scan write data with oob to flash */
static int scan_write_bbt(struct mtd_info *mtd, loff_t offs, size_t len,
uint8_t *buf, uint8_t *oob)
{
struct mtd_oob_ops ops;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooboffs = 0;
ops.ooblen = mtd->oobsize;
ops.datbuf = buf;
ops.oobbuf = oob;
ops.len = len;
- return mtd->write_oob(mtd, offs, &ops);
+ return mtd_write_oob(mtd, offs, &ops);
}
static u32 bbt_get_ver_offs(struct mtd_info *mtd, struct nand_bbt_descr *td)
@@ -403,65 +364,60 @@
/**
* read_abs_bbts - [GENERIC] Read the bad block table(s) for all chips starting at a given page
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @td: descriptor for the bad block table
- * @md: descriptor for the bad block table mirror
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ * @md: descriptor for the bad block table mirror
*
- * Read the bad block table(s) for all chips starting at a given page
- * We assume that the bbt bits are in consecutive order.
- *
-*/
-static int read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
- struct nand_bbt_descr *td, struct nand_bbt_descr *md)
+ * Read the bad block table(s) for all chips starting at a given page. We
+ * assume that the bbt bits are in consecutive order.
+ */
+static void read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
+ struct nand_bbt_descr *td, struct nand_bbt_descr *md)
{
struct nand_chip *this = mtd->priv;
/* Read the primary version, if available */
if (td->options & NAND_BBT_VERSION) {
- scan_read_raw(mtd, buf, (loff_t)td->pages[0] << this->page_shift,
+ scan_read(mtd, buf, (loff_t)td->pages[0] << this->page_shift,
mtd->writesize, td);
td->version[0] = buf[bbt_get_ver_offs(mtd, td)];
- printk(KERN_DEBUG "Bad block table at page %d, version 0x%02X\n",
- td->pages[0], td->version[0]);
+ pr_info("Bad block table at page %d, version 0x%02X\n",
+ td->pages[0], td->version[0]);
}
/* Read the mirror version, if available */
if (md && (md->options & NAND_BBT_VERSION)) {
- scan_read_raw(mtd, buf, (loff_t)md->pages[0] << this->page_shift,
- mtd->writesize, td);
+ scan_read(mtd, buf, (loff_t)md->pages[0] << this->page_shift,
+ mtd->writesize, md);
md->version[0] = buf[bbt_get_ver_offs(mtd, md)];
- printk(KERN_DEBUG "Bad block table at page %d, version 0x%02X\n",
- md->pages[0], md->version[0]);
+ pr_info("Bad block table at page %d, version 0x%02X\n",
+ md->pages[0], md->version[0]);
}
- return 1;
}
-/*
- * Scan a given block full
- */
+/* Scan a given block full */
static int scan_block_full(struct mtd_info *mtd, struct nand_bbt_descr *bd,
loff_t offs, uint8_t *buf, size_t readlen,
- int scanlen, int len)
+ int scanlen, int numpages)
{
int ret, j;
- ret = scan_read_raw_oob(mtd, buf, offs, readlen);
- if (ret)
+ ret = scan_read_oob(mtd, buf, offs, readlen);
+ /* Ignore ECC errors when checking for BBM */
+ if (ret && !mtd_is_bitflip_or_eccerr(ret))
return ret;
- for (j = 0; j < len; j++, buf += scanlen) {
+ for (j = 0; j < numpages; j++, buf += scanlen) {
if (check_pattern(buf, scanlen, mtd->writesize, bd))
return 1;
}
return 0;
}
-/*
- * Scan a given block partially
- */
+/* Scan a given block partially */
static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd,
- loff_t offs, uint8_t *buf, int len)
+ loff_t offs, uint8_t *buf, int numpages)
{
struct mtd_oob_ops ops;
int j, ret;
@@ -470,16 +426,16 @@
ops.oobbuf = buf;
ops.ooboffs = 0;
ops.datbuf = NULL;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
- for (j = 0; j < len; j++) {
+ for (j = 0; j < numpages; j++) {
/*
- * Read the full oob until read_oob is fixed to
- * handle single byte reads for 16 bit
- * buswidth
+ * Read the full oob until read_oob is fixed to handle single
+ * byte reads for 16 bit buswidth.
*/
- ret = mtd->read_oob(mtd, offs, &ops);
- if (ret)
+ ret = mtd_read_oob(mtd, offs, &ops);
+ /* Ignore ECC errors when checking for BBM */
+ if (ret && !mtd_is_bitflip_or_eccerr(ret))
return ret;
if (check_short_pattern(buf, bd))
@@ -492,32 +448,32 @@
/**
* create_bbt - [GENERIC] Create a bad block table by scanning the device
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @bd: descriptor for the good/bad block search pattern
- * @chip: create the table for a specific chip, -1 read all chips.
- * Applies only if NAND_BBT_PERCHIP option is set
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @bd: descriptor for the good/bad block search pattern
+ * @chip: create the table for a specific chip, -1 read all chips; applies only
+ * if NAND_BBT_PERCHIP option is set
*
- * Create a bad block table by scanning the device
- * for the given good/bad block identify pattern
+ * Create a bad block table by scanning the device for the given good/bad block
+ * identify pattern.
*/
static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
struct nand_bbt_descr *bd, int chip)
{
struct nand_chip *this = mtd->priv;
- int i, numblocks, len, scanlen;
+ int i, numblocks, numpages, scanlen;
int startblock;
loff_t from;
size_t readlen;
- MTDDEBUG(MTD_DEBUG_LEVEL0, "Scanning device for bad blocks\n");
+ pr_info("Scanning device for bad blocks\n");
if (bd->options & NAND_BBT_SCANALLPAGES)
- len = 1 << (this->bbt_erase_shift - this->page_shift);
+ numpages = 1 << (this->bbt_erase_shift - this->page_shift);
else if (bd->options & NAND_BBT_SCAN2NDPAGE)
- len = 2;
+ numpages = 2;
else
- len = 1;
+ numpages = 1;
if (!(bd->options & NAND_BBT_SCANEMPTY)) {
/* We need only read few bytes from the OOB area */
@@ -526,18 +482,20 @@
} else {
/* Full page content should be read */
scanlen = mtd->writesize + mtd->oobsize;
- readlen = len * mtd->writesize;
+ readlen = numpages * mtd->writesize;
}
if (chip == -1) {
- /* Note that numblocks is 2 * (real numblocks) here, see i+=2
- * below as it makes shifting and masking less painful */
+ /*
+ * Note that numblocks is 2 * (real numblocks) here, see i+=2
+ * below as it makes shifting and masking less painful
+ */
numblocks = mtd->size >> (this->bbt_erase_shift - 1);
startblock = 0;
from = 0;
} else {
if (chip >= this->numchips) {
- printk(KERN_WARNING "create_bbt(): chipnr (%d) > available chips (%d)\n",
+ pr_warn("create_bbt(): chipnr (%d) > available chips (%d)\n",
chip + 1, this->numchips);
return -EINVAL;
}
@@ -547,8 +505,8 @@
from = (loff_t)startblock << (this->bbt_erase_shift - 1);
}
- if (this->options & NAND_BBT_SCANLASTPAGE)
- from += mtd->erasesize - (mtd->writesize * len);
+ if (this->bbt_options & NAND_BBT_SCANLASTPAGE)
+ from += mtd->erasesize - (mtd->writesize * numpages);
for (i = startblock; i < numblocks;) {
int ret;
@@ -557,17 +515,16 @@
if (bd->options & NAND_BBT_SCANALLPAGES)
ret = scan_block_full(mtd, bd, from, buf, readlen,
- scanlen, len);
+ scanlen, numpages);
else
- ret = scan_block_fast(mtd, bd, from, buf, len);
+ ret = scan_block_fast(mtd, bd, from, buf, numpages);
if (ret < 0)
return ret;
if (ret) {
this->bbt[i >> 3] |= 0x03 << (i & 0x6);
- MTDDEBUG(MTD_DEBUG_LEVEL0,
- "Bad eraseblock %d at 0x%012llx\n",
+ pr_warn("Bad eraseblock %d at 0x%012llx\n",
i >> 1, (unsigned long long)from);
mtd->ecc_stats.badblocks++;
}
@@ -580,20 +537,18 @@
/**
* search_bbt - [GENERIC] scan the device for a specific bad block table
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @td: descriptor for the bad block table
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
*
- * Read the bad block table by searching for a given ident pattern.
- * Search is preformed either from the beginning up or from the end of
- * the device downwards. The search starts always at the start of a
- * block.
- * If the option NAND_BBT_PERCHIP is given, each chip is searched
- * for a bbt, which contains the bad block information of this chip.
- * This is necessary to provide support for certain DOC devices.
+ * Read the bad block table by searching for a given ident pattern. Search is
+ * preformed either from the beginning up or from the end of the device
+ * downwards. The search starts always at the start of a block. If the option
+ * NAND_BBT_PERCHIP is given, each chip is searched for a bbt, which contains
+ * the bad block information of this chip. This is necessary to provide support
+ * for certain DOC devices.
*
- * The bbt ident pattern resides in the oob area of the first page
- * in a block.
+ * The bbt ident pattern resides in the oob area of the first page in a block.
*/
static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td)
{
@@ -604,7 +559,7 @@
int bbtblocks;
int blocktopage = this->bbt_erase_shift - this->page_shift;
- /* Search direction top -> down ? */
+ /* Search direction top -> down? */
if (td->options & NAND_BBT_LASTBLOCK) {
startblock = (mtd->size >> this->bbt_erase_shift) - 1;
dir = -1;
@@ -613,7 +568,7 @@
dir = 1;
}
- /* Do we have a bbt per chip ? */
+ /* Do we have a bbt per chip? */
if (td->options & NAND_BBT_PERCHIP) {
chips = this->numchips;
bbtblocks = this->chipsize >> this->bbt_erase_shift;
@@ -634,7 +589,7 @@
loff_t offs = (loff_t)actblock << this->bbt_erase_shift;
/* Read first page */
- scan_read_raw(mtd, buf, offs, mtd->writesize, td);
+ scan_read(mtd, buf, offs, mtd->writesize, td);
if (!check_pattern(buf, scanlen, mtd->writesize, td)) {
td->pages[i] = actblock << blocktopage;
if (td->options & NAND_BBT_VERSION) {
@@ -649,10 +604,9 @@
/* Check, if we found a bbt for each requested chip */
for (i = 0; i < chips; i++) {
if (td->pages[i] == -1)
- printk(KERN_WARNING "Bad block table not found for chip %d\n", i);
+ pr_warn("Bad block table not found for chip %d\n", i);
else
- MTDDEBUG(MTD_DEBUG_LEVEL0, "Bad block table found " \
- "at page %d, version 0x%02X\n", td->pages[i],
+ pr_info("Bad block table found at page %d, version 0x%02X\n", td->pages[i],
td->version[i]);
}
return 0;
@@ -660,14 +614,16 @@
/**
* search_read_bbts - [GENERIC] scan the device for bad block table(s)
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @td: descriptor for the bad block table
- * @md: descriptor for the bad block table mirror
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ * @md: descriptor for the bad block table mirror
*
- * Search and read the bad block table(s)
-*/
-static int search_read_bbts(struct mtd_info *mtd, uint8_t * buf, struct nand_bbt_descr *td, struct nand_bbt_descr *md)
+ * Search and read the bad block table(s).
+ */
+static void search_read_bbts(struct mtd_info *mtd, uint8_t *buf,
+ struct nand_bbt_descr *td,
+ struct nand_bbt_descr *md)
{
/* Search the primary table */
search_bbt(mtd, buf, td);
@@ -675,23 +631,18 @@
/* Search the mirror table */
if (md)
search_bbt(mtd, buf, md);
-
- /* Force result check */
- return 1;
}
/**
* write_bbt - [GENERIC] (Re)write the bad block table
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ * @md: descriptor for the bad block table mirror
+ * @chipsel: selector for a specific chip, -1 for all
*
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @td: descriptor for the bad block table
- * @md: descriptor for the bad block table mirror
- * @chipsel: selector for a specific chip, -1 for all
- *
- * (Re)write the bad block table
- *
-*/
+ * (Re)write the bad block table.
+ */
static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
struct nand_bbt_descr *td, struct nand_bbt_descr *md,
int chipsel)
@@ -710,14 +661,14 @@
ops.ooblen = mtd->oobsize;
ops.ooboffs = 0;
ops.datbuf = NULL;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
if (!rcode)
rcode = 0xff;
- /* Write bad block table per chip rather than per device ? */
+ /* Write bad block table per chip rather than per device? */
if (td->options & NAND_BBT_PERCHIP) {
numblocks = (int)(this->chipsize >> this->bbt_erase_shift);
- /* Full device write or specific chip ? */
+ /* Full device write or specific chip? */
if (chipsel == -1) {
nrchips = this->numchips;
} else {
@@ -731,8 +682,8 @@
/* Loop through the chips */
for (; chip < nrchips; chip++) {
-
- /* There was already a version of the table, reuse the page
+ /*
+ * There was already a version of the table, reuse the page
* This applies for absolute placement too, as we have the
* page nr. in td->pages.
*/
@@ -741,8 +692,10 @@
goto write;
}
- /* Automatic placement of the bad block table */
- /* Search direction top -> down ? */
+ /*
+ * Automatic placement of the bad block table. Search direction
+ * top -> down?
+ */
if (td->options & NAND_BBT_LASTBLOCK) {
startblock = numblocks * (chip + 1) - 1;
dir = -1;
@@ -766,7 +719,7 @@
if (!md || md->pages[chip] != page)
goto write;
}
- printk(KERN_ERR "No space left to write bad block table\n");
+ pr_err("No space left to write bad block table\n");
return -ENOSPC;
write:
@@ -791,29 +744,27 @@
bbtoffs = chip * (numblocks >> 2);
- to = ((loff_t) page) << this->page_shift;
+ to = ((loff_t)page) << this->page_shift;
- /* Must we save the block contents ? */
+ /* Must we save the block contents? */
if (td->options & NAND_BBT_SAVECONTENT) {
/* Make it block aligned */
- to &= ~((loff_t) ((1 << this->bbt_erase_shift) - 1));
+ to &= ~((loff_t)((1 << this->bbt_erase_shift) - 1));
len = 1 << this->bbt_erase_shift;
- res = mtd->read(mtd, to, len, &retlen, buf);
+ res = mtd_read(mtd, to, len, &retlen, buf);
if (res < 0) {
if (retlen != len) {
- printk(KERN_INFO "nand_bbt: Error "
- "reading block for writing "
- "the bad block table\n");
+ pr_info("nand_bbt: error reading block "
+ "for writing the bad block table\n");
return res;
}
- printk(KERN_WARNING "nand_bbt: ECC error "
- "while reading block for writing "
- "bad block table\n");
+ pr_warn("nand_bbt: ECC error while reading "
+ "block for writing bad block table\n");
}
/* Read oob data */
ops.ooblen = (len >> this->page_shift) * mtd->oobsize;
ops.oobbuf = &buf[len];
- res = mtd->read_oob(mtd, to + mtd->writesize, &ops);
+ res = mtd_read_oob(mtd, to + mtd->writesize, &ops);
if (res < 0 || ops.oobretlen != ops.ooblen)
goto outerr;
@@ -821,19 +772,19 @@
pageoffs = page - (int)(to >> this->page_shift);
offs = pageoffs << this->page_shift;
/* Preset the bbt area with 0xff */
- memset(&buf[offs], 0xff, (size_t) (numblocks >> sft));
+ memset(&buf[offs], 0xff, (size_t)(numblocks >> sft));
ooboffs = len + (pageoffs * mtd->oobsize);
} else if (td->options & NAND_BBT_NO_OOB) {
ooboffs = 0;
offs = td->len;
- /* the version byte */
+ /* The version byte */
if (td->options & NAND_BBT_VERSION)
offs++;
/* Calc length */
- len = (size_t) (numblocks >> sft);
+ len = (size_t)(numblocks >> sft);
len += offs;
- /* Make it page aligned ! */
+ /* Make it page aligned! */
len = ALIGN(len, mtd->writesize);
/* Preset the buffer with 0xff */
memset(buf, 0xff, len);
@@ -841,8 +792,8 @@
memcpy(buf, td->pattern, td->len);
} else {
/* Calc length */
- len = (size_t) (numblocks >> sft);
- /* Make it page aligned ! */
+ len = (size_t)(numblocks >> sft);
+ /* Make it page aligned! */
len = ALIGN(len, mtd->writesize);
/* Preset the buffer with 0xff */
memset(buf, 0xff, len +
@@ -856,13 +807,13 @@
if (td->options & NAND_BBT_VERSION)
buf[ooboffs + td->veroffs] = td->version[chip];
- /* walk through the memory table */
+ /* Walk through the memory table */
for (i = 0; i < numblocks;) {
uint8_t dat;
dat = this->bbt[bbtoffs + (i >> 2)];
for (j = 0; j < 4; j++, i++) {
int sftcnt = (i << (3 - sft)) & sftmsk;
- /* Do not store the reserved bbt blocks ! */
+ /* Do not store the reserved bbt blocks! */
buf[offs + (i >> sft)] &=
~(msk[dat & 0x03] << sftcnt);
dat >>= 2;
@@ -883,8 +834,8 @@
if (res < 0)
goto outerr;
- printk(KERN_DEBUG "Bad block table written to 0x%012llx, version "
- "0x%02X\n", (unsigned long long)to, td->version[chip]);
+ pr_info("Bad block table written to 0x%012llx, version 0x%02X\n",
+ (unsigned long long)to, td->version[chip]);
/* Mark it as used */
td->pages[chip] = page;
@@ -892,19 +843,18 @@
return 0;
outerr:
- printk(KERN_WARNING
- "nand_bbt: Error while writing bad block table %d\n", res);
+ pr_warn("nand_bbt: error while writing bad block table %d\n", res);
return res;
}
/**
* nand_memory_bbt - [GENERIC] create a memory based bad block table
- * @mtd: MTD device structure
- * @bd: descriptor for the good/bad block search pattern
+ * @mtd: MTD device structure
+ * @bd: descriptor for the good/bad block search pattern
*
- * The function creates a memory based bbt by scanning the device
- * for manufacturer / software marked good / bad blocks
-*/
+ * The function creates a memory based bbt by scanning the device for
+ * manufacturer / software marked good / bad blocks.
+ */
static inline int nand_memory_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
{
struct nand_chip *this = mtd->priv;
@@ -915,25 +865,24 @@
/**
* check_create - [GENERIC] create and write bbt(s) if necessary
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @bd: descriptor for the good/bad block search pattern
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @bd: descriptor for the good/bad block search pattern
*
- * The function checks the results of the previous call to read_bbt
- * and creates / updates the bbt(s) if necessary
- * Creation is necessary if no bbt was found for the chip/device
- * Update is necessary if one of the tables is missing or the
- * version nr. of one table is less than the other
-*/
+ * The function checks the results of the previous call to read_bbt and creates
+ * / updates the bbt(s) if necessary. Creation is necessary if no bbt was found
+ * for the chip/device. Update is necessary if one of the tables is missing or
+ * the version nr. of one table is less than the other.
+ */
static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd)
{
- int i, chips, writeops, chipsel, res;
+ int i, chips, writeops, create, chipsel, res, res2;
struct nand_chip *this = mtd->priv;
struct nand_bbt_descr *td = this->bbt_td;
struct nand_bbt_descr *md = this->bbt_md;
struct nand_bbt_descr *rd, *rd2;
- /* Do we have a bbt per chip ? */
+ /* Do we have a bbt per chip? */
if (td->options & NAND_BBT_PERCHIP)
chips = this->numchips;
else
@@ -941,86 +890,98 @@
for (i = 0; i < chips; i++) {
writeops = 0;
+ create = 0;
rd = NULL;
rd2 = NULL;
- /* Per chip or per device ? */
+ res = res2 = 0;
+ /* Per chip or per device? */
chipsel = (td->options & NAND_BBT_PERCHIP) ? i : -1;
- /* Mirrored table available ? */
+ /* Mirrored table available? */
if (md) {
if (td->pages[i] == -1 && md->pages[i] == -1) {
+ create = 1;
writeops = 0x03;
- goto create;
- }
-
- if (td->pages[i] == -1) {
+ } else if (td->pages[i] == -1) {
rd = md;
- td->version[i] = md->version[i];
- writeops = 1;
- goto writecheck;
- }
-
- if (md->pages[i] == -1) {
+ writeops = 0x01;
+ } else if (md->pages[i] == -1) {
rd = td;
- md->version[i] = td->version[i];
- writeops = 2;
- goto writecheck;
- }
-
- if (td->version[i] == md->version[i]) {
+ writeops = 0x02;
+ } else if (td->version[i] == md->version[i]) {
rd = td;
if (!(td->options & NAND_BBT_VERSION))
rd2 = md;
- goto writecheck;
- }
-
- if (((int8_t) (td->version[i] - md->version[i])) > 0) {
+ } else if (((int8_t)(td->version[i] - md->version[i])) > 0) {
rd = td;
- md->version[i] = td->version[i];
- writeops = 2;
+ writeops = 0x02;
} else {
rd = md;
- td->version[i] = md->version[i];
- writeops = 1;
+ writeops = 0x01;
}
-
- goto writecheck;
-
} else {
if (td->pages[i] == -1) {
+ create = 1;
writeops = 0x01;
- goto create;
+ } else {
+ rd = td;
}
- rd = td;
- goto writecheck;
}
- create:
- /* Create the bad block table by scanning the device ? */
- if (!(td->options & NAND_BBT_CREATE))
- continue;
- /* Create the table in memory by scanning the chip(s) */
- if (!(this->options & NAND_CREATE_EMPTY_BBT))
- create_bbt(mtd, buf, bd, chipsel);
+ if (create) {
+ /* Create the bad block table by scanning the device? */
+ if (!(td->options & NAND_BBT_CREATE))
+ continue;
- td->version[i] = 1;
- if (md)
- md->version[i] = 1;
- writecheck:
- /* read back first ? */
- if (rd)
- read_abs_bbt(mtd, buf, rd, chipsel);
- /* If they weren't versioned, read both. */
- if (rd2)
- read_abs_bbt(mtd, buf, rd2, chipsel);
+ /* Create the table in memory by scanning the chip(s) */
+ if (!(this->bbt_options & NAND_BBT_CREATE_EMPTY))
+ create_bbt(mtd, buf, bd, chipsel);
- /* Write the bad block table to the device ? */
+ td->version[i] = 1;
+ if (md)
+ md->version[i] = 1;
+ }
+
+ /* Read back first? */
+ if (rd) {
+ res = read_abs_bbt(mtd, buf, rd, chipsel);
+ if (mtd_is_eccerr(res)) {
+ /* Mark table as invalid */
+ rd->pages[i] = -1;
+ rd->version[i] = 0;
+ i--;
+ continue;
+ }
+ }
+ /* If they weren't versioned, read both */
+ if (rd2) {
+ res2 = read_abs_bbt(mtd, buf, rd2, chipsel);
+ if (mtd_is_eccerr(res2)) {
+ /* Mark table as invalid */
+ rd2->pages[i] = -1;
+ rd2->version[i] = 0;
+ i--;
+ continue;
+ }
+ }
+
+ /* Scrub the flash table(s)? */
+ if (mtd_is_bitflip(res) || mtd_is_bitflip(res2))
+ writeops = 0x03;
+
+ /* Update version numbers before writing */
+ if (md) {
+ td->version[i] = max(td->version[i], md->version[i]);
+ md->version[i] = td->version[i];
+ }
+
+ /* Write the bad block table to the device? */
if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
res = write_bbt(mtd, buf, td, md, chipsel);
if (res < 0)
return res;
}
- /* Write the mirror bad block table to the device ? */
+ /* Write the mirror bad block table to the device? */
if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
res = write_bbt(mtd, buf, md, td, chipsel);
if (res < 0)
@@ -1032,20 +993,19 @@
/**
* mark_bbt_regions - [GENERIC] mark the bad block table regions
- * @mtd: MTD device structure
- * @td: bad block table descriptor
+ * @mtd: MTD device structure
+ * @td: bad block table descriptor
*
- * The bad block table regions are marked as "bad" to prevent
- * accidental erasures / writes. The regions are identified by
- * the mark 0x02.
-*/
+ * The bad block table regions are marked as "bad" to prevent accidental
+ * erasures / writes. The regions are identified by the mark 0x02.
+ */
static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
{
struct nand_chip *this = mtd->priv;
int i, j, chips, block, nrblocks, update;
uint8_t oldval, newval;
- /* Do we have a bbt per chip ? */
+ /* Do we have a bbt per chip? */
if (td->options & NAND_BBT_PERCHIP) {
chips = this->numchips;
nrblocks = (int)(this->chipsize >> this->bbt_erase_shift);
@@ -1082,9 +1042,11 @@
update = 1;
block += 2;
}
- /* If we want reserved blocks to be recorded to flash, and some
- new ones have been marked, then we need to update the stored
- bbts. This should only happen once. */
+ /*
+ * If we want reserved blocks to be recorded to flash, and some
+ * new ones have been marked, then we need to update the stored
+ * bbts. This should only happen once.
+ */
if (update && td->reserved_block_code)
nand_update_bbt(mtd, (loff_t)(block - 2) << (this->bbt_erase_shift - 1));
}
@@ -1092,8 +1054,8 @@
/**
* verify_bbt_descr - verify the bad block description
- * @mtd: MTD device structure
- * @bd: the table to verify
+ * @mtd: MTD device structure
+ * @bd: the table to verify
*
* This functions performs a few sanity checks on the bad block description
* table.
@@ -1111,16 +1073,16 @@
pattern_len = bd->len;
bits = bd->options & NAND_BBT_NRBITS_MSK;
- BUG_ON((this->options & NAND_USE_FLASH_BBT_NO_OOB) &&
- !(this->options & NAND_USE_FLASH_BBT));
+ BUG_ON((this->bbt_options & NAND_BBT_NO_OOB) &&
+ !(this->bbt_options & NAND_BBT_USE_FLASH));
BUG_ON(!bits);
if (bd->options & NAND_BBT_VERSION)
pattern_len++;
if (bd->options & NAND_BBT_NO_OOB) {
- BUG_ON(!(this->options & NAND_USE_FLASH_BBT));
- BUG_ON(!(this->options & NAND_USE_FLASH_BBT_NO_OOB));
+ BUG_ON(!(this->bbt_options & NAND_BBT_USE_FLASH));
+ BUG_ON(!(this->bbt_options & NAND_BBT_NO_OOB));
BUG_ON(bd->offs);
if (bd->options & NAND_BBT_VERSION)
BUG_ON(bd->veroffs != bd->len);
@@ -1140,18 +1102,16 @@
/**
* nand_scan_bbt - [NAND Interface] scan, find, read and maybe create bad block table(s)
- * @mtd: MTD device structure
- * @bd: descriptor for the good/bad block search pattern
+ * @mtd: MTD device structure
+ * @bd: descriptor for the good/bad block search pattern
*
- * The function checks, if a bad block table(s) is/are already
- * available. If not it scans the device for manufacturer
- * marked good / bad blocks and writes the bad block table(s) to
- * the selected place.
+ * The function checks, if a bad block table(s) is/are already available. If
+ * not it scans the device for manufacturer marked good / bad blocks and writes
+ * the bad block table(s) to the selected place.
*
- * The bad block table memory is allocated here. It must be freed
- * by calling the nand_free_bbt function.
- *
-*/
+ * The bad block table memory is allocated here. It must be freed by calling
+ * the nand_free_bbt function.
+ */
int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
{
struct nand_chip *this = mtd->priv;
@@ -1161,19 +1121,21 @@
struct nand_bbt_descr *md = this->bbt_md;
len = mtd->size >> (this->bbt_erase_shift + 2);
- /* Allocate memory (2bit per block) and clear the memory bad block table */
+ /*
+ * Allocate memory (2bit per block) and clear the memory bad block
+ * table.
+ */
this->bbt = kzalloc(len, GFP_KERNEL);
- if (!this->bbt) {
- printk(KERN_ERR "nand_scan_bbt: Out of memory\n");
+ if (!this->bbt)
return -ENOMEM;
- }
- /* If no primary table decriptor is given, scan the device
- * to build a memory based bad block table
+ /*
+ * If no primary table decriptor is given, scan the device to build a
+ * memory based bad block table.
*/
if (!td) {
if ((res = nand_memory_bbt(mtd, bd))) {
- printk(KERN_ERR "nand_bbt: Can't scan flash and build the RAM-based BBT\n");
+ pr_err("nand_bbt: can't scan flash and build the RAM-based BBT\n");
kfree(this->bbt);
this->bbt = NULL;
}
@@ -1187,22 +1149,20 @@
len += (len >> this->page_shift) * mtd->oobsize;
buf = vmalloc(len);
if (!buf) {
- printk(KERN_ERR "nand_bbt: Out of memory\n");
kfree(this->bbt);
this->bbt = NULL;
return -ENOMEM;
}
- /* Is the bbt at a given page ? */
+ /* Is the bbt at a given page? */
if (td->options & NAND_BBT_ABSPAGE) {
- res = read_abs_bbts(mtd, buf, td, md);
+ read_abs_bbts(mtd, buf, td, md);
} else {
/* Search the bad block table using a pattern in oob */
- res = search_read_bbts(mtd, buf, td, md);
+ search_read_bbts(mtd, buf, td, md);
}
- if (res)
- res = check_create(mtd, buf, bd);
+ res = check_create(mtd, buf, bd);
/* Prevent the bbt regions from erasing / writing */
mark_bbt_region(mtd, td);
@@ -1215,15 +1175,15 @@
/**
* nand_update_bbt - [NAND Interface] update bad block table(s)
- * @mtd: MTD device structure
- * @offs: the offset of the newly marked block
+ * @mtd: MTD device structure
+ * @offs: the offset of the newly marked block
*
- * The function updates the bad block table(s)
-*/
+ * The function updates the bad block table(s).
+ */
int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
{
struct nand_chip *this = mtd->priv;
- int len, res = 0, writeops = 0;
+ int len, res = 0;
int chip, chipsel;
uint8_t *buf;
struct nand_bbt_descr *td = this->bbt_td;
@@ -1236,14 +1196,10 @@
len = (1 << this->bbt_erase_shift);
len += (len >> this->page_shift) * mtd->oobsize;
buf = kmalloc(len, GFP_KERNEL);
- if (!buf) {
- printk(KERN_ERR "nand_update_bbt: Out of memory\n");
+ if (!buf)
return -ENOMEM;
- }
- writeops = md != NULL ? 0x03 : 0x01;
-
- /* Do we have a bbt per chip ? */
+ /* Do we have a bbt per chip? */
if (td->options & NAND_BBT_PERCHIP) {
chip = (int)(offs >> this->chip_shift);
chipsel = chip;
@@ -1256,14 +1212,14 @@
if (md)
md->version[chip]++;
- /* Write the bad block table to the device ? */
- if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
+ /* Write the bad block table to the device? */
+ if (td->options & NAND_BBT_WRITE) {
res = write_bbt(mtd, buf, td, md, chipsel);
if (res < 0)
goto out;
}
- /* Write the mirror bad block table to the device ? */
- if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
+ /* Write the mirror bad block table to the device? */
+ if (md && (md->options & NAND_BBT_WRITE)) {
res = write_bbt(mtd, buf, md, td, chipsel);
}
@@ -1272,8 +1228,10 @@
return res;
}
-/* Define some generic bad / good block scan pattern which are used
- * while scanning a device for factory marked good / bad blocks. */
+/*
+ * Define some generic bad / good block scan pattern which are used
+ * while scanning a device for factory marked good / bad blocks.
+ */
static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
static uint8_t scan_agand_pattern[] = { 0x1C, 0x71, 0xC7, 0x1C, 0x71, 0xC7 };
@@ -1285,8 +1243,7 @@
.pattern = scan_agand_pattern
};
-/* Generic flash bbt decriptors
-*/
+/* Generic flash bbt descriptors */
static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' };
@@ -1296,7 +1253,7 @@
.offs = 8,
.len = 4,
.veroffs = 12,
- .maxblocks = 4,
+ .maxblocks = NAND_BBT_SCAN_MAXBLOCKS,
.pattern = bbt_pattern
};
@@ -1306,55 +1263,51 @@
.offs = 8,
.len = 4,
.veroffs = 12,
- .maxblocks = 4,
+ .maxblocks = NAND_BBT_SCAN_MAXBLOCKS,
.pattern = mirror_pattern
};
-static struct nand_bbt_descr bbt_main_no_bbt_descr = {
+static struct nand_bbt_descr bbt_main_no_oob_descr = {
.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP
| NAND_BBT_NO_OOB,
.len = 4,
.veroffs = 4,
- .maxblocks = 4,
+ .maxblocks = NAND_BBT_SCAN_MAXBLOCKS,
.pattern = bbt_pattern
};
-static struct nand_bbt_descr bbt_mirror_no_bbt_descr = {
+static struct nand_bbt_descr bbt_mirror_no_oob_descr = {
.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP
| NAND_BBT_NO_OOB,
.len = 4,
.veroffs = 4,
- .maxblocks = 4,
+ .maxblocks = NAND_BBT_SCAN_MAXBLOCKS,
.pattern = mirror_pattern
};
-#define BBT_SCAN_OPTIONS (NAND_BBT_SCANLASTPAGE | NAND_BBT_SCAN2NDPAGE | \
- NAND_BBT_SCANBYTE1AND6)
+#define BADBLOCK_SCAN_MASK (~NAND_BBT_NO_OOB)
/**
- * nand_create_default_bbt_descr - [Internal] Creates a BBT descriptor structure
- * @this: NAND chip to create descriptor for
+ * nand_create_badblock_pattern - [INTERN] Creates a BBT descriptor structure
+ * @this: NAND chip to create descriptor for
*
* This function allocates and initializes a nand_bbt_descr for BBM detection
- * based on the properties of "this". The new descriptor is stored in
+ * based on the properties of @this. The new descriptor is stored in
* this->badblock_pattern. Thus, this->badblock_pattern should be NULL when
* passed to this function.
- *
*/
-static int nand_create_default_bbt_descr(struct nand_chip *this)
+static int nand_create_badblock_pattern(struct nand_chip *this)
{
struct nand_bbt_descr *bd;
if (this->badblock_pattern) {
- printk(KERN_WARNING "BBT descr already allocated; not replacing.\n");
+ pr_warn("Bad block pattern already allocated; not replacing\n");
return -EINVAL;
}
bd = kzalloc(sizeof(*bd), GFP_KERNEL);
- if (!bd) {
- printk(KERN_ERR "nand_create_default_bbt_descr: Out of memory\n");
+ if (!bd)
return -ENOMEM;
- }
- bd->options = this->options & BBT_SCAN_OPTIONS;
+ bd->options = this->bbt_options & BADBLOCK_SCAN_MASK;
bd->offs = this->badblockpos;
bd->len = (this->options & NAND_BUSWIDTH_16) ? 2 : 1;
bd->pattern = scan_ff_pattern;
@@ -1365,22 +1318,20 @@
/**
* nand_default_bbt - [NAND Interface] Select a default bad block table for the device
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*
- * This function selects the default bad block table
- * support for the device and calls the nand_scan_bbt function
- *
-*/
+ * This function selects the default bad block table support for the device and
+ * calls the nand_scan_bbt function.
+ */
int nand_default_bbt(struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
- /* Default for AG-AND. We must use a flash based
- * bad block table as the devices have factory marked
- * _good_ blocks. Erasing those blocks leads to loss
- * of the good / bad information, so we _must_ store
- * this information in a good / bad table during
- * startup
+ /*
+ * Default for AG-AND. We must use a flash based bad block table as the
+ * devices have factory marked _good_ blocks. Erasing those blocks
+ * leads to loss of the good / bad information, so we _must_ store this
+ * information in a good / bad table during startup.
*/
if (this->options & NAND_IS_AND) {
/* Use the default pattern descriptors */
@@ -1388,17 +1339,17 @@
this->bbt_td = &bbt_main_descr;
this->bbt_md = &bbt_mirror_descr;
}
- this->options |= NAND_USE_FLASH_BBT;
+ this->bbt_options |= NAND_BBT_USE_FLASH;
return nand_scan_bbt(mtd, &agand_flashbased);
}
- /* Is a flash based bad block table requested ? */
- if (this->options & NAND_USE_FLASH_BBT) {
+ /* Is a flash based bad block table requested? */
+ if (this->bbt_options & NAND_BBT_USE_FLASH) {
/* Use the default pattern descriptors */
if (!this->bbt_td) {
- if (this->options & NAND_USE_FLASH_BBT_NO_OOB) {
- this->bbt_td = &bbt_main_no_bbt_descr;
- this->bbt_md = &bbt_mirror_no_bbt_descr;
+ if (this->bbt_options & NAND_BBT_NO_OOB) {
+ this->bbt_td = &bbt_main_no_oob_descr;
+ this->bbt_md = &bbt_mirror_no_oob_descr;
} else {
this->bbt_td = &bbt_main_descr;
this->bbt_md = &bbt_mirror_descr;
@@ -1410,18 +1361,17 @@
}
if (!this->badblock_pattern)
- nand_create_default_bbt_descr(this);
+ nand_create_badblock_pattern(this);
return nand_scan_bbt(mtd, this->badblock_pattern);
}
/**
* nand_isbad_bbt - [NAND Interface] Check if a block is bad
- * @mtd: MTD device structure
- * @offs: offset in the device
- * @allowbbt: allow access to bad block table region
- *
-*/
+ * @mtd: MTD device structure
+ * @offs: offset in the device
+ * @allowbbt: allow access to bad block table region
+ */
int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
{
struct nand_chip *this = mtd->priv;
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index 3953549..f856778 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -71,14 +71,15 @@
* These are the new chips with large page size. The pagesize and the
* erasesize is determined from the extended id bytes
*/
-#define LP_OPTIONS (NAND_SAMSUNG_LP_OPTIONS | NAND_NO_READRDY | NAND_NO_AUTOINCR)
+#define LP_OPTIONS NAND_SAMSUNG_LP_OPTIONS
#define LP_OPTIONS16 (LP_OPTIONS | NAND_BUSWIDTH_16)
- /*512 Megabit */
+ /* 512 Megabit */
{"NAND 64MiB 1,8V 8-bit", 0xA2, 0, 64, 0, LP_OPTIONS},
{"NAND 64MiB 1,8V 8-bit", 0xA0, 0, 64, 0, LP_OPTIONS},
{"NAND 64MiB 3,3V 8-bit", 0xF2, 0, 64, 0, LP_OPTIONS},
{"NAND 64MiB 3,3V 8-bit", 0xD0, 0, 64, 0, LP_OPTIONS},
+ {"NAND 64MiB 3,3V 8-bit", 0xF0, 0, 64, 0, LP_OPTIONS},
{"NAND 64MiB 1,8V 16-bit", 0xB2, 0, 64, 0, LP_OPTIONS16},
{"NAND 64MiB 1,8V 16-bit", 0xB0, 0, 64, 0, LP_OPTIONS16},
{"NAND 64MiB 3,3V 16-bit", 0xC2, 0, 64, 0, LP_OPTIONS16},
@@ -157,9 +158,7 @@
* writes possible, but not implemented now
*/
{"AND 128MiB 3,3V 8-bit", 0x01, 2048, 128, 0x4000,
- NAND_IS_AND | NAND_NO_AUTOINCR |NAND_NO_READRDY | NAND_4PAGE_ARRAY |
- BBT_AUTO_REFRESH
- },
+ NAND_IS_AND | NAND_4PAGE_ARRAY | BBT_AUTO_REFRESH},
{NULL,}
};
@@ -176,6 +175,9 @@
{NAND_MFR_STMICRO, "ST Micro"},
{NAND_MFR_HYNIX, "Hynix"},
{NAND_MFR_MICRON, "Micron"},
- {NAND_MFR_AMD, "AMD"},
+ {NAND_MFR_AMD, "AMD/Spansion"},
+ {NAND_MFR_MACRONIX, "Macronix"},
+ {NAND_MFR_EON, "Eon"},
{0x0, "Unknown"}
};
+
diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c
index 4727f9c..d81972c 100644
--- a/drivers/mtd/nand/nand_util.c
+++ b/drivers/mtd/nand/nand_util.c
@@ -121,7 +121,7 @@
WATCHDOG_RESET();
if (!opts->scrub && bbtest) {
- int ret = meminfo->block_isbad(meminfo, erase.addr);
+ int ret = mtd_block_isbad(meminfo, erase.addr);
if (ret > 0) {
if (!opts->quiet)
printf("\rSkipping bad block at "
@@ -144,7 +144,7 @@
erased_length++;
- result = meminfo->erase(meminfo, &erase);
+ result = mtd_erase(meminfo, &erase);
if (result != 0) {
printf("\n%s: MTD Erase failure: %d\n",
mtd_device, result);
@@ -153,15 +153,16 @@
/* format for JFFS2 ? */
if (opts->jffs2 && chip->ecc.layout->oobavail >= 8) {
- chip->ops.ooblen = 8;
- chip->ops.datbuf = NULL;
- chip->ops.oobbuf = (uint8_t *)&cleanmarker;
- chip->ops.ooboffs = 0;
- chip->ops.mode = MTD_OOB_AUTO;
+ struct mtd_oob_ops ops;
+ ops.ooblen = 8;
+ ops.datbuf = NULL;
+ ops.oobbuf = (uint8_t *)&cleanmarker;
+ ops.ooboffs = 0;
+ ops.mode = MTD_OPS_AUTO_OOB;
- result = meminfo->write_oob(meminfo,
+ result = mtd_write_oob(meminfo,
erase.addr,
- &chip->ops);
+ &ops);
if (result != 0) {
printf("\n%s: MTD writeoob failure: %d\n",
mtd_device, result);
@@ -458,7 +459,8 @@
static size_t drop_ffs(const nand_info_t *nand, const u_char *buf,
const size_t *len)
{
- size_t i, l = *len;
+ size_t l = *len;
+ ssize_t i;
for (i = l - 1; i >= 0; i--)
if (buf[i] != 0xFF)
@@ -604,7 +606,7 @@
ops.len = pagesize;
ops.ooblen = nand->oobsize;
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.ooboffs = 0;
pages = write_size / pagesize_oob;
@@ -614,7 +616,7 @@
ops.datbuf = p_buffer;
ops.oobbuf = ops.datbuf + pagesize;
- rval = nand->write_oob(nand, offset, &ops);
+ rval = mtd_write_oob(nand, offset, &ops);
if (rval != 0)
break;
diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c
index 213d2c9..94b9033 100644
--- a/drivers/mtd/nand/ndfc.c
+++ b/drivers/mtd/nand/ndfc.c
@@ -216,6 +216,7 @@
nand->ecc.mode = NAND_ECC_HW;
nand->ecc.size = 256;
nand->ecc.bytes = 3;
+ nand->ecc.strength = 1;
nand->select_chip = ndfc_select_chip;
#ifdef CONFIG_SYS_NAND_BUSWIDTH_16BIT
diff --git a/drivers/mtd/nand/nomadik.c b/drivers/mtd/nand/nomadik.c
index b76f4cb..dc8e513 100644
--- a/drivers/mtd/nand/nomadik.c
+++ b/drivers/mtd/nand/nomadik.c
@@ -212,6 +212,7 @@
chip->ecc.mode = NAND_ECC_HW;
chip->ecc.bytes = 3;
chip->ecc.size = 512;
+ chip->ecc.strength = 1;
chip->ecc.layout = &nomadik_ecc_layout;
chip->ecc.calculate = nomadik_ecc_calculate;
chip->ecc.hwctl = nomadik_ecc_hwctl;
diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
index bc1bcad..5d08822 100644
--- a/drivers/mtd/nand/omap_gpmc.c
+++ b/drivers/mtd/nand/omap_gpmc.c
@@ -590,11 +590,12 @@
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @oob_required: caller expects OOB data read to chip->oob_poi
* @page: page number to read
*
*/
static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int page)
+ uint8_t *buf, int oob_required, int page)
{
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -804,6 +805,7 @@
nand->ecc.hwctl = NULL;
nand->ecc.correct = NULL;
nand->ecc.calculate = NULL;
+ nand->ecc.strength = eccstrength;
/* Setup the ecc configurations again */
if (hardware) {
@@ -901,7 +903,7 @@
nand->IO_ADDR_W = (void __iomem *)&gpmc_cfg->cs[cs].nand_cmd;
nand->cmd_ctrl = omap_nand_hwcontrol;
- nand->options = NAND_NO_PADDING | NAND_CACHEPRG | NAND_NO_AUTOINCR;
+ nand->options = NAND_NO_PADDING | NAND_CACHEPRG;
/* If we are 16 bit dev, our gpmc config tells us that */
if ((readl(&gpmc_cfg->cs[cs].config1) & 0x3000) == 0x1000)
nand->options |= NAND_BUSWIDTH_16;
@@ -934,6 +936,7 @@
nand->ecc.layout = &hw_bch8_nand_oob;
nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE;
nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES;
+ nand->ecc.strength = 8;
nand->ecc.hwctl = omap_enable_ecc_bch;
nand->ecc.correct = omap_correct_data_bch;
nand->ecc.calculate = omap_calculate_ecc_bch;
@@ -952,6 +955,7 @@
nand->ecc.hwctl = omap_enable_hwecc;
nand->ecc.correct = omap_correct_data;
nand->ecc.calculate = omap_calculate_ecc;
+ nand->ecc.strength = 1;
omap_hwecc_init(nand);
#endif
#endif
diff --git a/drivers/mtd/nand/s3c2410_nand.c b/drivers/mtd/nand/s3c2410_nand.c
index e1a459b..43d8213 100644
--- a/drivers/mtd/nand/s3c2410_nand.c
+++ b/drivers/mtd/nand/s3c2410_nand.c
@@ -173,6 +173,7 @@
nand->ecc.mode = NAND_ECC_HW;
nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE;
nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES;
+ nand->ecc.strength = 1;
#else
nand->ecc.mode = NAND_ECC_SOFT;
#endif
diff --git a/drivers/mtd/nand/tegra_nand.c b/drivers/mtd/nand/tegra_nand.c
index 4d94cc6..6afbec6 100644
--- a/drivers/mtd/nand/tegra_nand.c
+++ b/drivers/mtd/nand/tegra_nand.c
@@ -707,7 +707,7 @@
* -EIO when command timeout
*/
static int nand_read_page_hwecc(struct mtd_info *mtd,
- struct nand_chip *chip, uint8_t *buf, int page)
+ struct nand_chip *chip, uint8_t *buf, int oob_required, int page)
{
return nand_rw_page(mtd, chip, buf, page, 1, 0);
}
@@ -719,8 +719,8 @@
* @param chip nand chip info structure
* @param buf data buffer
*/
-static void nand_write_page_hwecc(struct mtd_info *mtd,
- struct nand_chip *chip, const uint8_t *buf)
+static int nand_write_page_hwecc(struct mtd_info *mtd,
+ struct nand_chip *chip, const uint8_t *buf, int oob_required)
{
int page;
struct nand_drv *info;
@@ -731,6 +731,7 @@
(readl(&info->reg->addr_reg2) << 16);
nand_rw_page(mtd, chip, (uint8_t *)buf, page, 1, 1);
+ return 0;
}
@@ -746,7 +747,7 @@
* -EIO when command timeout
*/
static int nand_read_page_raw(struct mtd_info *mtd,
- struct nand_chip *chip, uint8_t *buf, int page)
+ struct nand_chip *chip, uint8_t *buf, int oob_required, int page)
{
return nand_rw_page(mtd, chip, buf, page, 0, 0);
}
@@ -758,8 +759,8 @@
* @param chip nand chip info structure
* @param buf data buffer
*/
-static void nand_write_page_raw(struct mtd_info *mtd,
- struct nand_chip *chip, const uint8_t *buf)
+static int nand_write_page_raw(struct mtd_info *mtd,
+ struct nand_chip *chip, const uint8_t *buf, int oob_required)
{
int page;
struct nand_drv *info;
@@ -769,6 +770,7 @@
(readl(&info->reg->addr_reg2) << 16);
nand_rw_page(mtd, chip, (uint8_t *)buf, page, 0, 1);
+ return 0;
}
/**
@@ -873,19 +875,13 @@
* @param mtd mtd info structure
* @param chip nand chip info structure
* @param page page number to read
- * @param sndcmd flag whether to issue read command or not
- * @return 1 - issue read command next time
- * 0 - not to issue
*/
static int nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
- int page, int sndcmd)
+ int page)
{
- if (sndcmd) {
- chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
- sndcmd = 0;
- }
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
nand_rw_oob(mtd, chip, page, 0, 0);
- return sndcmd;
+ return 0;
}
/**
@@ -1018,6 +1014,7 @@
nand->ecc.write_page_raw = nand_write_page_raw;
nand->ecc.read_oob = nand_read_oob;
nand->ecc.write_oob = nand_write_oob;
+ nand->ecc.strength = 1;
nand->select_chip = nand_select_chip;
nand->dev_ready = nand_dev_ready;
nand->priv = &nand_ctrl;
diff --git a/drivers/mtd/nand/tegra_nand.h b/drivers/mtd/nand/tegra_nand.h
index 7e74be7..622b869 100644
--- a/drivers/mtd/nand/tegra_nand.h
+++ b/drivers/mtd/nand/tegra_nand.h
@@ -224,7 +224,7 @@
#define BCH_DEC_STATUS_MAX_CORR_CNT_MASK (0x1f << 8)
#define BCH_DEC_STATUS_PAGE_NUMBER_MASK 0xFF
-#define LP_OPTIONS (NAND_NO_READRDY | NAND_NO_AUTOINCR)
+#define LP_OPTIONS 0
struct nand_ctlr {
u32 command; /* offset 00h */
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 858e322..ddfe7e7 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -743,7 +743,7 @@
}
/**
- * onenand_transfer_auto_oob - [Internal] oob auto-placement transfer
+ * onenand_transfer_auto_oob - [INTERN] oob auto-placement transfer
* @param mtd MTD device structure
* @param buf destination address
* @param column oob offset to read from
@@ -807,7 +807,7 @@
return status;
/* check if we failed due to uncorrectable error */
- if (status != -EBADMSG && status != ONENAND_BBT_READ_ECC_ERROR)
+ if (!mtd_is_eccerr(status) && status != ONENAND_BBT_READ_ECC_ERROR)
return status;
/* check if address lies in MLC region */
@@ -847,7 +847,7 @@
MTDDEBUG(MTD_DEBUG_LEVEL3, "onenand_read_ops_nolock: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
- if (ops->mode == MTD_OOB_AUTO)
+ if (ops->mode == MTD_OPS_AUTO_OOB)
oobsize = this->ecclayout->oobavail;
else
oobsize = mtd->oobsize;
@@ -914,7 +914,7 @@
thisooblen = oobsize - oobcolumn;
thisooblen = min_t(int, thisooblen, ooblen - oobread);
- if (ops->mode == MTD_OOB_AUTO)
+ if (ops->mode == MTD_OPS_AUTO_OOB)
onenand_transfer_auto_oob(mtd, oobbuf, oobcolumn, thisooblen);
else
this->read_bufferram(mtd, 0, ONENAND_SPARERAM, oobbuf, oobcolumn, thisooblen);
@@ -929,7 +929,7 @@
if (unlikely(ret))
ret = onenand_recover_lsb(mtd, from, ret);
onenand_update_bufferram(mtd, from, !ret);
- if (ret == -EBADMSG)
+ if (mtd_is_eccerr(ret))
ret = 0;
}
@@ -950,7 +950,7 @@
/* Now wait for load */
ret = this->wait(mtd, FL_READING);
onenand_update_bufferram(mtd, from, !ret);
- if (ret == -EBADMSG)
+ if (mtd_is_eccerr(ret))
ret = 0;
}
}
@@ -987,7 +987,7 @@
struct mtd_ecc_stats stats;
int read = 0, thislen, column, oobsize;
size_t len = ops->ooblen;
- mtd_oob_mode_t mode = ops->mode;
+ unsigned int mode = ops->mode;
u_char *buf = ops->oobbuf;
int ret = 0, readcmd;
@@ -998,7 +998,7 @@
/* Initialize return length value */
ops->oobretlen = 0;
- if (mode == MTD_OOB_AUTO)
+ if (mode == MTD_OPS_AUTO_OOB)
oobsize = this->ecclayout->oobavail;
else
oobsize = mtd->oobsize;
@@ -1041,7 +1041,7 @@
break;
}
- if (mode == MTD_OOB_AUTO)
+ if (mode == MTD_OPS_AUTO_OOB)
onenand_transfer_auto_oob(mtd, buf, column, thislen);
else
this->read_bufferram(mtd, 0, ONENAND_SPARERAM, buf, column, thislen);
@@ -1115,10 +1115,10 @@
int ret;
switch (ops->mode) {
- case MTD_OOB_PLACE:
- case MTD_OOB_AUTO:
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_AUTO_OOB:
break;
- case MTD_OOB_RAW:
+ case MTD_OPS_RAW:
/* Not implemented yet */
default:
return -EINVAL;
@@ -1337,7 +1337,7 @@
#define NOTALIGNED(x) ((x & (this->subpagesize - 1)) != 0)
/**
- * onenand_fill_auto_oob - [Internal] oob auto-placement transfer
+ * onenand_fill_auto_oob - [INTERN] oob auto-placement transfer
* @param mtd MTD device structure
* @param oob_buf oob buffer
* @param buf source address
@@ -1404,19 +1404,13 @@
ops->retlen = 0;
ops->oobretlen = 0;
- /* Do not allow writes past end of device */
- if (unlikely((to + len) > mtd->size)) {
- printk(KERN_ERR "onenand_write_ops_nolock: Attempt write to past end of device\n");
- return -EINVAL;
- }
-
/* Reject writes, which are not page aligned */
if (unlikely(NOTALIGNED(to) || NOTALIGNED(len))) {
printk(KERN_ERR "onenand_write_ops_nolock: Attempt to write not page aligned data\n");
return -EINVAL;
}
- if (ops->mode == MTD_OOB_AUTO)
+ if (ops->mode == MTD_OPS_AUTO_OOB)
oobsize = this->ecclayout->oobavail;
else
oobsize = mtd->oobsize;
@@ -1450,7 +1444,7 @@
/* We send data to spare ram with oobsize
* * to prevent byte access */
memset(oobbuf, 0xff, mtd->oobsize);
- if (ops->mode == MTD_OOB_AUTO)
+ if (ops->mode == MTD_OPS_AUTO_OOB)
onenand_fill_auto_oob(mtd, oobbuf, oob, oobcolumn, thisooblen);
else
memcpy(oobbuf + oobcolumn, oob, thisooblen);
@@ -1502,7 +1496,7 @@
}
/**
- * onenand_write_oob_nolock - [Internal] OneNAND write out-of-band
+ * onenand_write_oob_nolock - [INTERN] OneNAND write out-of-band
* @param mtd MTD device structure
* @param to offset to write to
* @param len number of bytes to write
@@ -1521,7 +1515,7 @@
u_char *oobbuf;
size_t len = ops->ooblen;
const u_char *buf = ops->oobbuf;
- mtd_oob_mode_t mode = ops->mode;
+ unsigned int mode = ops->mode;
to += ops->ooboffs;
@@ -1530,7 +1524,7 @@
/* Initialize retlen, in case of early exit */
ops->oobretlen = 0;
- if (mode == MTD_OOB_AUTO)
+ if (mode == MTD_OPS_AUTO_OOB)
oobsize = this->ecclayout->oobavail;
else
oobsize = mtd->oobsize;
@@ -1571,7 +1565,7 @@
/* We send data to spare ram with oobsize
* to prevent byte access */
memset(oobbuf, 0xff, mtd->oobsize);
- if (mode == MTD_OOB_AUTO)
+ if (mode == MTD_OPS_AUTO_OOB)
onenand_fill_auto_oob(mtd, oobbuf, buf, column, thislen);
else
memcpy(oobbuf + column, buf, thislen);
@@ -1661,10 +1655,10 @@
int ret;
switch (ops->mode) {
- case MTD_OOB_PLACE:
- case MTD_OOB_AUTO:
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_AUTO_OOB:
break;
- case MTD_OOB_RAW:
+ case MTD_OPS_RAW:
/* Not implemented yet */
default:
return -EINVAL;
@@ -1720,13 +1714,6 @@
MTDDEBUG(MTD_DEBUG_LEVEL3, "onenand_erase: start = 0x%08x, len = %i\n",
(unsigned int) addr, len);
- /* Do not allow erase past end of device */
- if (unlikely((len + addr) > mtd->size)) {
- MTDDEBUG(MTD_DEBUG_LEVEL0, "onenand_erase:"
- "Erase past end of device\n");
- return -EINVAL;
- }
-
if (FLEXONENAND(this)) {
/* Find the eraseregion of this address */
i = flexonenand_region(mtd, addr);
@@ -1762,8 +1749,6 @@
return -EINVAL;
}
- instr->fail_addr = 0xffffffff;
-
/* Grab the lock and see if the device is available */
onenand_get_device(mtd, FL_ERASING);
@@ -1889,7 +1874,7 @@
struct bbm_info *bbm = this->bbm;
u_char buf[2] = {0, 0};
struct mtd_oob_ops ops = {
- .mode = MTD_OOB_PLACE,
+ .mode = MTD_OPS_PLACE_OOB,
.ooblen = 2,
.oobbuf = buf,
.ooboffs = 0,
@@ -1915,7 +1900,6 @@
*/
int onenand_block_markbad(struct mtd_info *mtd, loff_t ofs)
{
- struct onenand_chip *this = mtd->priv;
int ret;
ret = onenand_block_isbad(mtd, ofs);
@@ -1926,7 +1910,7 @@
return ret;
}
- ret = this->block_markbad(mtd, ofs);
+ ret = mtd_block_markbad(mtd, ofs);
return ret;
}
@@ -2386,7 +2370,7 @@
int i, ret;
int block;
struct mtd_oob_ops ops = {
- .mode = MTD_OOB_PLACE,
+ .mode = MTD_OPS_PLACE_OOB,
.ooboffs = 0,
.ooblen = mtd->oobsize,
.datbuf = NULL,
@@ -2645,14 +2629,14 @@
mtd->size = this->chipsize;
mtd->flags = MTD_CAP_NANDFLASH;
- mtd->erase = onenand_erase;
- mtd->read = onenand_read;
- mtd->write = onenand_write;
- mtd->read_oob = onenand_read_oob;
- mtd->write_oob = onenand_write_oob;
- mtd->sync = onenand_sync;
- mtd->block_isbad = onenand_block_isbad;
- mtd->block_markbad = onenand_block_markbad;
+ mtd->_erase = onenand_erase;
+ mtd->_read = onenand_read;
+ mtd->_write = onenand_write;
+ mtd->_read_oob = onenand_read_oob;
+ mtd->_write_oob = onenand_write_oob;
+ mtd->_sync = onenand_sync;
+ mtd->_block_isbad = onenand_block_isbad;
+ mtd->_block_markbad = onenand_block_markbad;
return 0;
}
diff --git a/drivers/mtd/onenand/onenand_bbt.c b/drivers/mtd/onenand/onenand_bbt.c
index 9d5da54..0267c2c 100644
--- a/drivers/mtd/onenand/onenand_bbt.c
+++ b/drivers/mtd/onenand/onenand_bbt.c
@@ -87,7 +87,7 @@
startblock = 0;
from = 0;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooblen = readlen;
ops.oobbuf = buf;
ops.len = ops.ooboffs = ops.retlen = ops.oobretlen = 0;
@@ -200,10 +200,8 @@
len = this->chipsize >> (this->erase_shift + 2);
/* Allocate memory (2bit per block) */
bbm->bbt = malloc(len);
- if (!bbm->bbt) {
- printk(KERN_ERR "onenand_scan_bbt: Out of memory\n");
+ if (!bbm->bbt)
return -ENOMEM;
- }
/* Clear the memory bad block table */
memset(bbm->bbt, 0x00, len);
diff --git a/drivers/mtd/spi/spansion.c b/drivers/mtd/spi/spansion.c
index 2218e2f..b3ef90f 100644
--- a/drivers/mtd/spi/spansion.c
+++ b/drivers/mtd/spi/spansion.c
@@ -101,7 +101,7 @@
.idcode2 = 0x4d01,
.pages_per_sector = 256,
.nr_sectors = 256,
- .name = "S25FL129P_64K",
+ .name = "S25FL129P_64K/S25FL128S",
},
{
.idcode1 = 0x0219,
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index a708162..2588822 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -539,7 +539,7 @@
ubi->peb_count = mtd_div_by_eb(ubi->mtd->size, ubi->mtd);
ubi->flash_size = ubi->mtd->size;
- if (ubi->mtd->block_isbad && ubi->mtd->block_markbad)
+ if (mtd_can_have_bb(ubi->mtd))
ubi->bad_allowed = 1;
ubi->min_io_size = ubi->mtd->writesize;
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index d523c94..d2d3c9c 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -460,7 +460,7 @@
if (err == UBI_IO_BITFLIPS) {
scrub = 1;
err = 0;
- } else if (err == -EBADMSG) {
+ } else if (mtd_is_eccerr(err)) {
if (vol->vol_type == UBI_DYNAMIC_VOLUME)
goto out_unlock;
scrub = 1;
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index 8423894..05de9ae 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -154,7 +154,7 @@
addr = (loff_t)pnum * ubi->peb_size + offset;
retry:
- err = ubi->mtd->read(ubi->mtd, addr, len, &read, buf);
+ err = mtd_read(ubi->mtd, addr, len, &read, buf);
if (err) {
if (err == -EUCLEAN) {
/*
@@ -268,7 +268,7 @@
}
addr = (loff_t)pnum * ubi->peb_size + offset;
- err = ubi->mtd->write(ubi->mtd, addr, len, &written, buf);
+ err = mtd_write(ubi->mtd, addr, len, &written, buf);
if (err) {
ubi_err("error %d while writing %d bytes to PEB %d:%d, written"
" %zd bytes", err, len, pnum, offset, written);
@@ -318,7 +318,7 @@
ei.callback = erase_callback;
ei.priv = (unsigned long)&wq;
- err = ubi->mtd->erase(ubi->mtd, &ei);
+ err = mtd_erase(ubi->mtd, &ei);
if (err) {
if (retries++ < UBI_IO_RETRIES) {
dbg_io("error %d while erasing PEB %d, retry",
@@ -516,7 +516,7 @@
if (ubi->bad_allowed) {
int ret;
- ret = mtd->block_isbad(mtd, (loff_t)pnum * ubi->peb_size);
+ ret = mtd_block_isbad(mtd, (loff_t)pnum * ubi->peb_size);
if (ret < 0)
ubi_err("error %d while checking if PEB %d is bad",
ret, pnum);
@@ -551,7 +551,7 @@
if (!ubi->bad_allowed)
return 0;
- err = mtd->block_markbad(mtd, (loff_t)pnum * ubi->peb_size);
+ err = mtd_block_markbad(mtd, (loff_t)pnum * ubi->peb_size);
if (err)
ubi_err("cannot mark PEB %d bad, error %d", pnum, err);
return err;
@@ -1242,7 +1242,7 @@
loff_t addr = (loff_t)pnum * ubi->peb_size + offset;
mutex_lock(&ubi->dbg_buf_mutex);
- err = ubi->mtd->read(ubi->mtd, addr, len, &read, ubi->dbg_peb_buf);
+ err = mtd_read(ubi->mtd, addr, len, &read, ubi->dbg_peb_buf);
if (err && err != -EUCLEAN) {
ubi_err("error %d while reading %d bytes from PEB %d:%d, "
"read %zd bytes", err, len, pnum, offset, read);
diff --git a/drivers/mtd/ubi/kapi.c b/drivers/mtd/ubi/kapi.c
index 423d479..e553188 100644
--- a/drivers/mtd/ubi/kapi.c
+++ b/drivers/mtd/ubi/kapi.c
@@ -349,7 +349,7 @@
return 0;
err = ubi_eba_read_leb(ubi, vol, lnum, buf, offset, len, check);
- if (err && err == -EBADMSG && vol->vol_type == UBI_STATIC_VOLUME) {
+ if (err && mtd_is_eccerr(err) && vol->vol_type == UBI_STATIC_VOLUME) {
ubi_warn("mark volume %d as corrupted", vol_id);
vol->corrupted = 1;
}
diff --git a/drivers/mtd/ubi/misc.c b/drivers/mtd/ubi/misc.c
index a6410bf..e8660d9 100644
--- a/drivers/mtd/ubi/misc.c
+++ b/drivers/mtd/ubi/misc.c
@@ -82,7 +82,7 @@
err = ubi_eba_read_leb(ubi, vol, i, buf, 0, size, 1);
if (err) {
- if (err == -EBADMSG)
+ if (mtd_is_eccerr(err))
err = 1;
break;
}
diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
index f679f06..29d2320 100644
--- a/drivers/mtd/ubi/vtbl.c
+++ b/drivers/mtd/ubi/vtbl.c
@@ -388,7 +388,7 @@
err = ubi_io_read_data(ubi, leb[seb->lnum], seb->pnum, 0,
ubi->vtbl_size);
- if (err == UBI_IO_BITFLIPS || err == -EBADMSG)
+ if (err == UBI_IO_BITFLIPS || mtd_is_eccerr(err))
/*
* Scrub the PEB later. Note, -EBADMSG indicates an
* uncorrectable ECC error, but we have our own CRC and
diff --git a/drivers/net/cpsw.c b/drivers/net/cpsw.c
index 7a36850..379b679 100644
--- a/drivers/net/cpsw.c
+++ b/drivers/net/cpsw.c
@@ -109,7 +109,13 @@
u32 flow_thresh;
u32 port_vlan;
u32 tx_pri_map;
+#ifdef CONFIG_AM33XX
u32 gap_thresh;
+#elif defined(CONFIG_TI814X)
+ u32 ts_ctl;
+ u32 ts_seq_ltype;
+ u32 ts_vlan;
+#endif
u32 sa_lo;
u32 sa_hi;
};
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index 4dbcdca..da95e28 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -516,9 +516,7 @@
#ifdef FEC_QUIRK_ENET_MAC
{
u32 ecr = readl(&fec->eth->ecntrl) & ~FEC_ECNTRL_SPEED;
- u32 rcr = (readl(&fec->eth->r_cntrl) &
- ~(FEC_RCNTRL_RMII | FEC_RCNTRL_RMII_10T)) |
- FEC_RCNTRL_RGMII | FEC_RCNTRL_MII_MODE;
+ u32 rcr = readl(&fec->eth->r_cntrl) & ~FEC_RCNTRL_RMII_10T;
if (speed == _1000BASET)
ecr |= FEC_ECNTRL_SPEED;
else if (speed != _100BASET)
diff --git a/drivers/net/fm/b4860.c b/drivers/net/fm/b4860.c
index 8cde7af..3b5defe 100644
--- a/drivers/net/fm/b4860.c
+++ b/drivers/net/fm/b4860.c
@@ -55,8 +55,10 @@
if (is_device_disabled(port))
return PHY_INTERFACE_MODE_NONE;
- if ((port == FM1_10GEC1 || port == FM1_10GEC2)
- && (is_serdes_configured(XAUI_FM1)))
+ /*B4860 has two 10Gig Mac*/
+ if ((port == FM1_10GEC1 || port == FM1_10GEC2) &&
+ ((is_serdes_configured(XAUI_FM1_MAC9)) ||
+ (is_serdes_configured(XAUI_FM1_MAC10))))
return PHY_INTERFACE_MODE_XGMII;
/* Fix me need to handle RGMII here first */
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 5e90d70..af5f4b8 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -34,6 +34,7 @@
COBJS-$(CONFIG_PHY_ATHEROS) += atheros.o
COBJS-$(CONFIG_PHY_BROADCOM) += broadcom.o
COBJS-$(CONFIG_PHY_DAVICOM) += davicom.o
+COBJS-$(CONFIG_PHY_ET1011C) += et1011c.o
COBJS-$(CONFIG_PHY_LXT) += lxt.o
COBJS-$(CONFIG_PHY_MARVELL) += marvell.o
COBJS-$(CONFIG_PHY_MICREL) += micrel.o
diff --git a/drivers/net/phy/et1011c.c b/drivers/net/phy/et1011c.c
new file mode 100644
index 0000000..5e22399
--- /dev/null
+++ b/drivers/net/phy/et1011c.c
@@ -0,0 +1,110 @@
+/*
+ * ET1011C PHY driver
+ *
+ * Derived from Linux kernel driver by Chaithrika U S
+ * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <config.h>
+#include <phy.h>
+
+#define ET1011C_CONFIG_REG (0x16)
+#define ET1011C_TX_FIFO_MASK (0x3 << 12)
+#define ET1011C_TX_FIFO_DEPTH_8 (0x0 << 12)
+#define ET1011C_TX_FIFO_DEPTH_16 (0x1 << 12)
+#define ET1011C_INTERFACE_MASK (0x7 << 0)
+#define ET1011C_GMII_INTERFACE (0x2 << 0)
+#define ET1011C_SYS_CLK_EN (0x1 << 4)
+#define ET1011C_TX_CLK_EN (0x1 << 5)
+
+#define ET1011C_STATUS_REG (0x1A)
+#define ET1011C_DUPLEX_STATUS (0x1 << 7)
+#define ET1011C_SPEED_MASK (0x3 << 8)
+#define ET1011C_SPEED_1000 (0x2 << 8)
+#define ET1011C_SPEED_100 (0x1 << 8)
+#define ET1011C_SPEED_10 (0x0 << 8)
+
+static int et1011c_config(struct phy_device *phydev)
+{
+ int ctl = 0;
+ ctl = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR);
+ if (ctl < 0)
+ return ctl;
+ ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 |
+ BMCR_ANENABLE);
+ /* First clear the PHY */
+ phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, ctl | BMCR_RESET);
+
+ return genphy_config_aneg(phydev);
+}
+
+static int et1011c_parse_status(struct phy_device *phydev)
+{
+ int mii_reg;
+ int speed;
+
+ mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, ET1011C_STATUS_REG);
+
+ if (mii_reg & ET1011C_DUPLEX_STATUS)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+
+ speed = mii_reg & ET1011C_SPEED_MASK;
+ switch (speed) {
+ case ET1011C_SPEED_1000:
+ phydev->speed = SPEED_1000;
+ mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, ET1011C_CONFIG_REG);
+ mii_reg &= ~ET1011C_TX_FIFO_MASK;
+ phy_write(phydev, MDIO_DEVAD_NONE, ET1011C_CONFIG_REG,
+ mii_reg |
+ ET1011C_GMII_INTERFACE |
+ ET1011C_SYS_CLK_EN |
+#ifdef CONFIG_PHY_ET1011C_TX_CLK_FIX
+ ET1011C_TX_CLK_EN |
+#endif
+ ET1011C_TX_FIFO_DEPTH_16);
+ break;
+ case ET1011C_SPEED_100:
+ phydev->speed = SPEED_100;
+ break;
+ case ET1011C_SPEED_10:
+ phydev->speed = SPEED_10;
+ break;
+ }
+
+ return 0;
+}
+
+static int et1011c_startup(struct phy_device *phydev)
+{
+ genphy_update_link(phydev);
+ et1011c_parse_status(phydev);
+ return 0;
+}
+
+static struct phy_driver et1011c_driver = {
+ .name = "ET1011C",
+ .uid = 0x0282f014,
+ .mask = 0xfffffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &et1011c_config,
+ .startup = &et1011c_startup,
+};
+
+int phy_et1011c_init(void)
+{
+ phy_register(&et1011c_driver);
+
+ return 0;
+}
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 4b27198..46801c7 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -465,6 +465,16 @@
.shutdown = &genphy_shutdown,
};
+static struct phy_driver M88E1518_driver = {
+ .name = "Marvell 88E1518",
+ .uid = 0x1410dd1,
+ .mask = 0xffffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &m88e1111s_config,
+ .startup = &m88e1011s_startup,
+ .shutdown = &genphy_shutdown,
+};
+
int phy_marvell_init(void)
{
phy_register(&M88E1149S_driver);
@@ -474,6 +484,7 @@
phy_register(&M88E1118R_driver);
phy_register(&M88E1111S_driver);
phy_register(&M88E1011S_driver);
+ phy_register(&M88E1518_driver);
return 0;
}
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index d0ed766..f8c5481 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -430,6 +430,9 @@
#ifdef CONFIG_PHY_DAVICOM
phy_davicom_init();
#endif
+#ifdef CONFIG_PHY_ET1011C
+ phy_et1011c_init();
+#endif
#ifdef CONFIG_PHY_LXT
phy_lxt_init();
#endif
diff --git a/drivers/net/phy/teranetics.c b/drivers/net/phy/teranetics.c
index 78447b7..84ce736 100644
--- a/drivers/net/phy/teranetics.c
+++ b/drivers/net/phy/teranetics.c
@@ -34,9 +34,21 @@
unsigned short restart_an = (MDIO_AN_CTRL1_RESTART |
MDIO_AN_CTRL1_ENABLE |
MDIO_AN_CTRL1_XNP);
+ u8 phy_hwversion;
- phy_write(phydev, 30, 93, 2);
- phy_write(phydev, MDIO_MMD_AN, MDIO_CTRL1, restart_an);
+ /*
+ * bit 15:12 of register 30.32 indicates PHY hardware
+ * version. It can be used to distinguish TN80xx from
+ * TN2020. TN2020 needs write 0x2 to 30.93, but TN80xx
+ * needs 0x1.
+ */
+ phy_hwversion = (phy_read(phydev, 30, 32) >> 12) & 0xf;
+ if (phy_hwversion <= 3) {
+ phy_write(phydev, 30, 93, 2);
+ phy_write(phydev, MDIO_MMD_AN, MDIO_CTRL1, restart_an);
+ } else {
+ phy_write(phydev, 30, 93, 1);
+ }
}
return 0;
diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c
index 3596065..eac9b6f 100644
--- a/drivers/net/zynq_gem.c
+++ b/drivers/net/zynq_gem.c
@@ -33,6 +33,8 @@
#include <phy.h>
#include <miiphy.h>
#include <watchdog.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sys_proto.h>
#if !defined(CONFIG_PHYLIB)
# error XILINX_GEM_ETHERNET requires PHYLIB
@@ -67,13 +69,14 @@
#define ZYNQ_GEM_NWCTRL_MDEN_MASK 0x00000010 /* Enable MDIO port */
#define ZYNQ_GEM_NWCTRL_STARTTX_MASK 0x00000200 /* Start tx (tx_go) */
-#define ZYNQ_GEM_NWCFG_SPEED 0x00000001 /* 100 Mbps operation */
-#define ZYNQ_GEM_NWCFG_FDEN 0x00000002 /* Full Duplex mode */
-#define ZYNQ_GEM_NWCFG_FSREM 0x00020000 /* FCS removal */
+#define ZYNQ_GEM_NWCFG_SPEED100 0x000000001 /* 100 Mbps operation */
+#define ZYNQ_GEM_NWCFG_SPEED1000 0x000000400 /* 1Gbps operation */
+#define ZYNQ_GEM_NWCFG_FDEN 0x000000002 /* Full Duplex mode */
+#define ZYNQ_GEM_NWCFG_FSREM 0x000020000 /* FCS removal */
#define ZYNQ_GEM_NWCFG_MDCCLKDIV 0x000080000 /* Div pclk by 32, 80MHz */
+#define ZYNQ_GEM_NWCFG_MDCCLKDIV2 0x0000c0000 /* Div pclk by 48, 120MHz */
-#define ZYNQ_GEM_NWCFG_INIT (ZYNQ_GEM_NWCFG_SPEED | \
- ZYNQ_GEM_NWCFG_FDEN | \
+#define ZYNQ_GEM_NWCFG_INIT (ZYNQ_GEM_NWCFG_FDEN | \
ZYNQ_GEM_NWCFG_FSREM | \
ZYNQ_GEM_NWCFG_MDCCLKDIV)
@@ -92,6 +95,17 @@
ZYNQ_GEM_DMACR_TXSIZE | \
ZYNQ_GEM_DMACR_RXBUF)
+/* Use MII register 1 (MII status register) to detect PHY */
+#define PHY_DETECT_REG 1
+
+/* Mask used to verify certain PHY features (or register contents)
+ * in the register above:
+ * 0x1000: 10Mbps full duplex support
+ * 0x0800: 10Mbps half duplex support
+ * 0x0008: Auto-negotiation support
+ */
+#define PHY_DETECT_MASK 0x1808
+
/* Device registers */
struct zynq_gem_regs {
u32 nwctrl; /* Network Control reg */
@@ -134,6 +148,8 @@
u32 rxbd_current;
u32 rx_first_buf;
int phyaddr;
+ u32 emio;
+ int init;
struct phy_device *phydev;
struct mii_dev *bus;
};
@@ -196,6 +212,44 @@
ZYNQ_GEM_PHYMNTNC_OP_W_MASK, &data);
}
+static void phy_detection(struct eth_device *dev)
+{
+ int i;
+ u16 phyreg;
+ struct zynq_gem_priv *priv = dev->priv;
+
+ if (priv->phyaddr != -1) {
+ phyread(dev, priv->phyaddr, PHY_DETECT_REG, &phyreg);
+ if ((phyreg != 0xFFFF) &&
+ ((phyreg & PHY_DETECT_MASK) == PHY_DETECT_MASK)) {
+ /* Found a valid PHY address */
+ debug("Default phy address %d is valid\n",
+ priv->phyaddr);
+ return;
+ } else {
+ debug("PHY address is not setup correctly %d\n",
+ priv->phyaddr);
+ priv->phyaddr = -1;
+ }
+ }
+
+ debug("detecting phy address\n");
+ if (priv->phyaddr == -1) {
+ /* detect the PHY address */
+ for (i = 31; i >= 0; i--) {
+ phyread(dev, i, PHY_DETECT_REG, &phyreg);
+ if ((phyreg != 0xFFFF) &&
+ ((phyreg & PHY_DETECT_MASK) == PHY_DETECT_MASK)) {
+ /* Found a valid PHY address */
+ priv->phyaddr = i;
+ debug("Found valid phy address, %d\n", i);
+ return;
+ }
+ }
+ }
+ printf("PHY is not detected\n");
+}
+
static int zynq_gem_setup_mac(struct eth_device *dev)
{
u32 i, macaddrlow, macaddrhigh;
@@ -226,7 +280,7 @@
static int zynq_gem_init(struct eth_device *dev, bd_t * bis)
{
- u32 i;
+ u32 i, rclk, clk = 0;
struct phy_device *phydev;
const u32 stat_size = (sizeof(struct zynq_gem_regs) -
offsetof(struct zynq_gem_regs, stat)) / 4;
@@ -239,59 +293,92 @@
SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full;
- /* Disable all interrupts */
- writel(0xFFFFFFFF, ®s->idr);
+ if (!priv->init) {
+ /* Disable all interrupts */
+ writel(0xFFFFFFFF, ®s->idr);
- /* Disable the receiver & transmitter */
- writel(0, ®s->nwctrl);
- writel(0, ®s->txsr);
- writel(0, ®s->rxsr);
- writel(0, ®s->phymntnc);
+ /* Disable the receiver & transmitter */
+ writel(0, ®s->nwctrl);
+ writel(0, ®s->txsr);
+ writel(0, ®s->rxsr);
+ writel(0, ®s->phymntnc);
- /* Clear the Hash registers for the mac address pointed by AddressPtr */
- writel(0x0, ®s->hashl);
- /* Write bits [63:32] in TOP */
- writel(0x0, ®s->hashh);
+ /* Clear the Hash registers for the mac address
+ * pointed by AddressPtr
+ */
+ writel(0x0, ®s->hashl);
+ /* Write bits [63:32] in TOP */
+ writel(0x0, ®s->hashh);
- /* Clear all counters */
- for (i = 0; i <= stat_size; i++)
- readl(®s->stat[i]);
+ /* Clear all counters */
+ for (i = 0; i <= stat_size; i++)
+ readl(®s->stat[i]);
- /* Setup RxBD space */
- memset(&(priv->rx_bd), 0, sizeof(priv->rx_bd));
- /* Create the RxBD ring */
- memset(&(priv->rxbuffers), 0, sizeof(priv->rxbuffers));
+ /* Setup RxBD space */
+ memset(&(priv->rx_bd), 0, sizeof(priv->rx_bd));
+ /* Create the RxBD ring */
+ memset(&(priv->rxbuffers), 0, sizeof(priv->rxbuffers));
- for (i = 0; i < RX_BUF; i++) {
- priv->rx_bd[i].status = 0xF0000000;
- priv->rx_bd[i].addr = (u32)((char *) &(priv->rxbuffers) +
+ for (i = 0; i < RX_BUF; i++) {
+ priv->rx_bd[i].status = 0xF0000000;
+ priv->rx_bd[i].addr =
+ (u32)((char *)&(priv->rxbuffers) +
(i * PKTSIZE_ALIGN));
+ }
+ /* WRAP bit to last BD */
+ priv->rx_bd[--i].addr |= ZYNQ_GEM_RXBUF_WRAP_MASK;
+ /* Write RxBDs to IP */
+ writel((u32)&(priv->rx_bd), ®s->rxqbase);
+
+ /* Setup for DMA Configuration register */
+ writel(ZYNQ_GEM_DMACR_INIT, ®s->dmacr);
+
+ /* Setup for Network Control register, MDIO, Rx and Tx enable */
+ setbits_le32(®s->nwctrl, ZYNQ_GEM_NWCTRL_MDEN_MASK);
+
+ priv->init++;
}
- /* WRAP bit to last BD */
- priv->rx_bd[--i].addr |= ZYNQ_GEM_RXBUF_WRAP_MASK;
- /* Write RxBDs to IP */
- writel((u32) &(priv->rx_bd), ®s->rxqbase);
- /* MAC Setup */
- /* Setup Network Configuration register */
- writel(ZYNQ_GEM_NWCFG_INIT, ®s->nwcfg);
-
- /* Setup for DMA Configuration register */
- writel(ZYNQ_GEM_DMACR_INIT, ®s->dmacr);
-
- /* Setup for Network Control register, MDIO, Rx and Tx enable */
- setbits_le32(®s->nwctrl, ZYNQ_GEM_NWCTRL_MDEN_MASK |
- ZYNQ_GEM_NWCTRL_RXEN_MASK | ZYNQ_GEM_NWCTRL_TXEN_MASK);
+ phy_detection(dev);
/* interface - look at tsec */
phydev = phy_connect(priv->bus, priv->phyaddr, dev, 0);
- phydev->supported &= supported;
+ phydev->supported = supported | ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause;
phydev->advertising = phydev->supported;
priv->phydev = phydev;
phy_config(phydev);
phy_startup(phydev);
+ switch (phydev->speed) {
+ case SPEED_1000:
+ writel(ZYNQ_GEM_NWCFG_INIT | ZYNQ_GEM_NWCFG_SPEED1000,
+ ®s->nwcfg);
+ rclk = (0 << 4) | (1 << 0);
+ clk = (1 << 20) | (8 << 8) | (0 << 4) | (1 << 0);
+ break;
+ case SPEED_100:
+ clrsetbits_le32(®s->nwcfg, ZYNQ_GEM_NWCFG_SPEED1000,
+ ZYNQ_GEM_NWCFG_INIT | ZYNQ_GEM_NWCFG_SPEED100);
+ rclk = 1 << 0;
+ clk = (5 << 20) | (8 << 8) | (0 << 4) | (1 << 0);
+ break;
+ case SPEED_10:
+ rclk = 1 << 0;
+ /* FIXME untested */
+ clk = (5 << 20) | (8 << 8) | (0 << 4) | (1 << 0);
+ break;
+ }
+
+ /* Change the rclk and clk only not using EMIO interface */
+ if (!priv->emio)
+ zynq_slcr_gem_clk_setup(dev->iobase !=
+ ZYNQ_GEM_BASEADDR0, rclk, clk);
+
+ setbits_le32(®s->nwctrl, ZYNQ_GEM_NWCTRL_RXEN_MASK |
+ ZYNQ_GEM_NWCTRL_TXEN_MASK);
+
return 0;
}
@@ -307,11 +394,10 @@
writel((u32)&(priv->tx_bd), ®s->txqbase);
/* Setup Tx BD */
- memset((void *) &(priv->tx_bd), 0, sizeof(struct emac_bd));
+ memset((void *)&(priv->tx_bd), 0, sizeof(struct emac_bd));
priv->tx_bd.addr = (u32)ptr;
- priv->tx_bd.status = len | ZYNQ_GEM_TXBUF_LAST_MASK |
- ZYNQ_GEM_TXBUF_WRAP_MASK;
+ priv->tx_bd.status = len | ZYNQ_GEM_TXBUF_LAST_MASK;
/* Start transmit */
setbits_le32(®s->nwctrl, ZYNQ_GEM_NWCTRL_STARTTX_MASK);
@@ -364,19 +450,17 @@
if ((++priv->rxbd_current) >= RX_BUF)
priv->rxbd_current = 0;
-
- return frame_len;
}
- return 0;
+ return frame_len;
}
static void zynq_gem_halt(struct eth_device *dev)
{
struct zynq_gem_regs *regs = (struct zynq_gem_regs *)dev->iobase;
- /* Disable the receiver & transmitter */
- writel(0, ®s->nwctrl);
+ clrsetbits_le32(®s->nwctrl, ZYNQ_GEM_NWCTRL_RXEN_MASK |
+ ZYNQ_GEM_NWCTRL_TXEN_MASK, 0);
}
static int zynq_gem_miiphyread(const char *devname, uchar addr,
@@ -399,7 +483,7 @@
return phywrite(dev, addr, reg, val);
}
-int zynq_gem_initialize(bd_t *bis, int base_addr)
+int zynq_gem_initialize(bd_t *bis, int base_addr, int phy_addr, u32 emio)
{
struct eth_device *dev;
struct zynq_gem_priv *priv;
@@ -415,11 +499,8 @@
}
priv = dev->priv;
-#ifdef CONFIG_PHY_ADDR
- priv->phyaddr = CONFIG_PHY_ADDR;
-#else
- priv->phyaddr = -1;
-#endif
+ priv->phyaddr = phy_addr;
+ priv->emio = emio;
sprintf(dev->name, "Gem.%x", base_addr);
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 1ae35d3..1499944 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -26,7 +26,8 @@
LIB := $(obj)libpci.o
COBJS-$(CONFIG_FSL_PCI_INIT) += fsl_pci_init.o
-COBJS-$(CONFIG_PCI) += pci.o pci_auto.o pci_indirect.o
+COBJS-$(CONFIG_PCI) += pci.o pci_auto.o
+COBJS-$(CONFIG_PCI_INDIRECT_BRIDGE) += pci_indirect.o
COBJS-$(CONFIG_FTPCI100) += pci_ftpci100.o
COBJS-$(CONFIG_IXP_PCI) += pci_ixp.o
COBJS-$(CONFIG_SH4_PCI) += pci_sh4.o
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 1dac16a..a9c4237 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -30,7 +30,7 @@
COBJS-$(CONFIG_TPS6586X_POWER) += tps6586x.o
COBJS-$(CONFIG_TWL4030_POWER) += twl4030.o
COBJS-$(CONFIG_TWL6030_POWER) += twl6030.o
-COBJS-$(CONFIG_TWL6035_POWER) += twl6035.o
+COBJS-$(CONFIG_PALMAS_POWER) += palmas.o
COBJS-$(CONFIG_POWER) += power_core.o
COBJS-$(CONFIG_DIALOG_POWER) += power_dialog.o
diff --git a/drivers/power/palmas.c b/drivers/power/palmas.c
new file mode 100644
index 0000000..2d275a7
--- /dev/null
+++ b/drivers/power/palmas.c
@@ -0,0 +1,161 @@
+/*
+ * (C) Copyright 2012-2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <config.h>
+#include <palmas.h>
+
+void palmas_init_settings(void)
+{
+#ifdef CONFIG_PALMAS_SMPS7_FPWM
+ int err;
+ /*
+ * Set SMPS7 (1.8 V I/O supply on platforms with TWL6035/37) to
+ * forced PWM mode. This reduces noise (but affects efficiency).
+ */
+ u8 val = SMPS_MODE_SLP_FPWM | SMPS_MODE_ACT_FPWM;
+ err = palmas_i2c_write_u8(TWL603X_CHIP_P1, SMPS7_CTRL, val);
+ if (err)
+ printf("palmas: could not force PWM for SMPS7: err = %d\n",
+ err);
+#endif
+}
+
+int palmas_mmc1_poweron_ldo(void)
+{
+ u8 val = 0;
+
+#if defined(CONFIG_DRA7XX)
+ /*
+ * Currently valid for the dra7xx_evm board:
+ * Set TPS659038 LDO1 to 3.0 V
+ */
+ val = LDO_VOLT_3V0;
+ if (palmas_i2c_write_u8(TPS65903X_CHIP_P1, LDO1_VOLTAGE, val)) {
+ printf("tps65903x: could not set LDO1 voltage.\n");
+ return 1;
+ }
+ /* TURN ON LDO1 */
+ val = RSC_MODE_SLEEP | RSC_MODE_ACTIVE;
+ if (palmas_i2c_write_u8(TPS65903X_CHIP_P1, LDO1_CTRL, val)) {
+ printf("tps65903x: could not turn on LDO1.\n");
+ return 1;
+ }
+ return 0;
+#else
+ /*
+ * We assume that this is a OMAP543X + TWL603X board:
+ * Set TWL6035/37 LDO9 to 3.0 V
+ */
+ val = LDO_VOLT_3V0;
+ return twl603x_mmc1_set_ldo9(val);
+#endif
+}
+
+/*
+ * On some OMAP5 + TWL603X hardware the SD card socket and LDO9_IN are
+ * powered by an external 3.3 V regulator, while the output of LDO9
+ * supplies VDDS_SDCARD for the OMAP5 interface only. This implies that
+ * LDO9 could be set to 'bypass' mode when required (e.g. for 3.3 V cards).
+ */
+int twl603x_mmc1_set_ldo9(u8 vsel)
+{
+ u8 cval = 0, vval = 0; /* Off by default */
+ int err;
+
+ if (vsel) {
+ /* Turn on */
+ if (vsel > LDO_VOLT_3V3) {
+ /* Put LDO9 in bypass */
+ cval = LDO9_BYP_EN | RSC_MODE_SLEEP | RSC_MODE_ACTIVE;
+ vval = LDO_VOLT_3V3;
+ } else {
+ cval = RSC_MODE_SLEEP | RSC_MODE_ACTIVE;
+ vval = vsel & 0x3f;
+ }
+ }
+ err = palmas_i2c_write_u8(TWL603X_CHIP_P1, LDO9_VOLTAGE, vval);
+ if (err) {
+ printf("twl603x: could not set LDO9 %s: err = %d\n",
+ vsel > LDO_VOLT_3V3 ? "bypass" : "voltage", err);
+ return err;
+ }
+ err = palmas_i2c_write_u8(TWL603X_CHIP_P1, LDO9_CTRL, cval);
+ if (err)
+ printf("twl603x: could not turn %s LDO9: err = %d\n",
+ cval ? "on" : "off", err);
+ return err;
+}
+
+#ifdef CONFIG_PALMAS_AUDPWR
+/*
+ * Turn audio codec power and 32 kHz clock on/off. Use for
+ * testing OMAP543X + TWL603X + TWL604X boards only.
+ */
+int twl603x_audio_power(u8 on)
+{
+ u8 cval = 0, vval = 0, c32k = 0;
+ int err;
+
+ if (on) {
+ vval = SMPS_VOLT_2V1;
+ cval = SMPS_MODE_SLP_AUTO | SMPS_MODE_ACT_AUTO;
+ c32k = RSC_MODE_SLEEP | RSC_MODE_ACTIVE;
+ }
+ /* Set SMPS9 to 2.1 V (for TWL604x), or to 0 (off) */
+ err = palmas_i2c_write_u8(TWL603X_CHIP_P1, SMPS9_VOLTAGE, vval);
+ if (err) {
+ printf("twl603x: could not set SMPS9 voltage: err = %d\n",
+ err);
+ return err;
+ }
+ /* Turn on or off SMPS9 */
+ err = palmas_i2c_write_u8(TWL603X_CHIP_P1, SMPS9_CTRL, cval);
+ if (err) {
+ printf("twl603x: could not turn SMPS9 %s: err = %d\n",
+ cval ? "on" : "off", err);
+ return err;
+ }
+ /* Output 32 kHz clock on or off */
+ err = palmas_i2c_write_u8(TWL603X_CHIP_P1, CLK32KGAUDIO_CTRL, c32k);
+ if (err)
+ printf("twl603x: could not turn CLK32KGAUDIO %s: err = %d\n",
+ c32k ? "on" : "off", err);
+ return err;
+}
+#endif
+
+/*
+ * Enable/disable back-up battery (or super cap) charging on TWL6035/37.
+ * Please use defined BB_xxx values.
+ */
+int twl603x_enable_bb_charge(u8 bb_fields)
+{
+ u8 val = bb_fields & 0x0f;
+ int err;
+
+ val |= (VRTC_EN_SLP | VRTC_EN_OFF | VRTC_PWEN);
+ err = palmas_i2c_write_u8(TWL603X_CHIP_P1, BB_VRTC_CTRL, val);
+ if (err)
+ printf("twl603x: could not set BB_VRTC_CTRL to 0x%02x: err = %d\n",
+ val, err);
+ return err;
+}
diff --git a/drivers/power/twl4030.c b/drivers/power/twl4030.c
index e7d5f13..6610f78 100644
--- a/drivers/power/twl4030.c
+++ b/drivers/power/twl4030.c
@@ -45,14 +45,14 @@
void twl4030_power_reset_init(void)
{
u8 val = 0;
- if (twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, &val,
- TWL4030_PM_MASTER_P1_SW_EVENTS)) {
+ if (twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER,
+ TWL4030_PM_MASTER_P1_SW_EVENTS, &val)) {
printf("Error:TWL4030: failed to read the power register\n");
printf("Could not initialize hardware reset\n");
} else {
val |= TWL4030_PM_MASTER_SW_EVENTS_STOPON_PWRON;
- if (twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, val,
- TWL4030_PM_MASTER_P1_SW_EVENTS)) {
+ if (twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
+ TWL4030_PM_MASTER_P1_SW_EVENTS, val)) {
printf("Error:TWL4030: failed to write the power register\n");
printf("Could not initialize hardware reset\n");
}
@@ -68,8 +68,8 @@
int ret;
/* Select the Voltage */
- ret = twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, vsel_val,
- vsel_reg);
+ ret = twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, vsel_reg,
+ vsel_val);
if (ret != 0) {
printf("Could not write vsel to reg %02x (%d)\n",
vsel_reg, ret);
@@ -77,8 +77,8 @@
}
/* Select the Device Group (enable the supply if dev_grp_sel != 0) */
- ret = twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, dev_grp_sel,
- dev_grp);
+ ret = twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, dev_grp,
+ dev_grp_sel);
if (ret != 0)
printf("Could not write grp_sel to reg %02x (%d)\n",
dev_grp, ret);
diff --git a/drivers/power/twl6030.c b/drivers/power/twl6030.c
index c5a0038..d421e60 100644
--- a/drivers/power/twl6030.c
+++ b/drivers/power/twl6030.c
@@ -25,30 +25,19 @@
#include <twl6030.h>
-/* Functions to read and write from TWL6030 */
-static inline int twl6030_i2c_write_u8(u8 chip_no, u8 val, u8 reg)
-{
- return i2c_write(chip_no, reg, 1, &val, 1);
-}
-
-static inline int twl6030_i2c_read_u8(u8 chip_no, u8 *val, u8 reg)
-{
- return i2c_read(chip_no, reg, 1, val, 1);
-}
-
static int twl6030_gpadc_read_channel(u8 channel_no)
{
u8 lsb = 0;
u8 msb = 0;
int ret = 0;
- ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, &lsb,
- GPCH0_LSB + channel_no * 2);
+ ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC,
+ GPCH0_LSB + channel_no * 2, &lsb);
if (ret)
return ret;
- ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, &msb,
- GPCH0_MSB + channel_no * 2);
+ ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC,
+ GPCH0_MSB + channel_no * 2, &msb);
if (ret)
return ret;
@@ -60,7 +49,7 @@
u8 val;
int ret = 0;
- ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC, CTRL_P2_SP2, CTRL_P2);
+ ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC, CTRL_P2, CTRL_P2_SP2);
if (ret)
return ret;
@@ -68,7 +57,7 @@
val = CTRL_P2_BUSY;
while (!((val & CTRL_P2_EOCP2) && (!(val & CTRL_P2_BUSY)))) {
- ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, &val, CTRL_P2);
+ ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, CTRL_P2, &val);
if (ret)
return ret;
udelay(1000);
@@ -79,29 +68,29 @@
void twl6030_stop_usb_charging(void)
{
- twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, 0, CONTROLLER_CTRL1);
+ twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CONTROLLER_CTRL1, 0);
return;
}
void twl6030_start_usb_charging(void)
{
- twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_VICHRG_1500,
- CHARGERUSB_VICHRG);
- twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_CIN_LIMIT_NONE,
- CHARGERUSB_CINLIMIT);
- twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, MBAT_TEMP,
- CONTROLLER_INT_MASK);
- twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, MASK_MCHARGERUSB_THMREG,
- CHARGERUSB_INT_MASK);
- twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_VOREG_4P0,
- CHARGERUSB_VOREG);
- twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_CTRL2_VITERM_400,
- CHARGERUSB_CTRL2);
- twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, TERM, CHARGERUSB_CTRL1);
+ twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
+ CHARGERUSB_VICHRG, CHARGERUSB_VICHRG_1500);
+ twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
+ CHARGERUSB_CINLIMIT, CHARGERUSB_CIN_LIMIT_NONE);
+ twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
+ CONTROLLER_INT_MASK, MBAT_TEMP);
+ twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
+ CHARGERUSB_INT_MASK, MASK_MCHARGERUSB_THMREG);
+ twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
+ CHARGERUSB_VOREG, CHARGERUSB_VOREG_4P0);
+ twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
+ CHARGERUSB_CTRL2, CHARGERUSB_CTRL2_VITERM_400);
+ twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_CTRL1, TERM);
/* Enable USB charging */
- twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CONTROLLER_CTRL1_EN_CHARGER,
- CONTROLLER_CTRL1);
+ twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
+ CONTROLLER_CTRL1, CONTROLLER_CTRL1_EN_CHARGER);
return;
}
@@ -111,8 +100,8 @@
u8 msb = 0;
u8 lsb = 0;
- twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, &msb, FG_REG_11);
- twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, &lsb, FG_REG_10);
+ twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, FG_REG_11, &msb);
+ twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, FG_REG_10, &lsb);
battery_current = ((msb << 8) | lsb);
/* convert 10 bit signed number to 16 bit signed number */
@@ -156,10 +145,10 @@
int ret = 0;
/* Enable VBAT measurement */
- twl6030_i2c_write_u8(TWL6030_CHIP_PM, VBAT_MEAS, MISC1);
+ twl6030_i2c_write_u8(TWL6030_CHIP_PM, MISC1, VBAT_MEAS);
/* Enable GPADC module */
- ret = twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, FGS | GPADCS, TOGGLE1);
+ ret = twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, TOGGLE1, FGS | GPADCS);
if (ret) {
printf("Failed to enable GPADC\n");
return;
@@ -173,7 +162,7 @@
printf("Main battery voltage too low!\n");
/* Check for the presence of USB charger */
- twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, &stat1, CONTROLLER_STAT1);
+ twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, CONTROLLER_STAT1, &stat1);
/* check for battery presence indirectly via Fuel gauge */
if ((stat1 & VBUS_DET) && (battery_volt < 3300))
@@ -185,8 +174,8 @@
void twl6030_power_mmc_init()
{
/* set voltage to 3.0 and turnon for APP */
- twl6030_i2c_write_u8(TWL6030_CHIP_PM, 0x15, VMMC_CFG_VOLTATE);
- twl6030_i2c_write_u8(TWL6030_CHIP_PM, 0x21, VMMC_CFG_STATE);
+ twl6030_i2c_write_u8(TWL6030_CHIP_PM, VMMC_CFG_VOLTATE, 0x15);
+ twl6030_i2c_write_u8(TWL6030_CHIP_PM, VMMC_CFG_STATE, 0x21);
}
void twl6030_usb_device_settings()
@@ -194,12 +183,12 @@
u8 data = 0;
/* Select APP Group and set state to ON */
- twl6030_i2c_write_u8(TWL6030_CHIP_PM, 0x21, VUSB_CFG_STATE);
+ twl6030_i2c_write_u8(TWL6030_CHIP_PM, VUSB_CFG_STATE, 0x21);
- twl6030_i2c_read_u8(TWL6030_CHIP_PM, &data, MISC2);
+ twl6030_i2c_read_u8(TWL6030_CHIP_PM, MISC2, &data);
data |= 0x10;
/* Select the input supply for VBUS regulator */
- twl6030_i2c_write_u8(TWL6030_CHIP_PM, data, MISC2);
+ twl6030_i2c_write_u8(TWL6030_CHIP_PM, MISC2, data);
}
#endif
diff --git a/drivers/power/twl6035.c b/drivers/power/twl6035.c
deleted file mode 100644
index d3de698..0000000
--- a/drivers/power/twl6035.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * (C) Copyright 2012
- * Texas Instruments, <www.ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <config.h>
-#include <twl6035.h>
-
-/* Functions to read and write from TWL6030 */
-int twl6035_i2c_write_u8(u8 chip_no, u8 val, u8 reg)
-{
- return i2c_write(chip_no, reg, 1, &val, 1);
-}
-
-int twl6035_i2c_read_u8(u8 chip_no, u8 *val, u8 reg)
-{
- return i2c_read(chip_no, reg, 1, val, 1);
-}
-
-/* To align with i2c mw/mr address, reg, val command syntax */
-static inline int palmas_write_u8(u8 chip_no, u8 reg, u8 val)
-{
- return i2c_write(chip_no, reg, 1, &val, 1);
-}
-
-static inline int palmas_read_u8(u8 chip_no, u8 reg, u8 *val)
-{
- return i2c_read(chip_no, reg, 1, val, 1);
-}
-
-void twl6035_init_settings(void)
-{
- return;
-}
-
-int twl6035_mmc1_poweron_ldo(void)
-{
- u8 val = 0;
-
- /* set LDO9 TWL6035 to 3V */
- val = 0x2b; /* (3 -.9)*28 +1 */
-
- if (palmas_write_u8(0x48, LDO9_VOLTAGE, val)) {
- printf("twl6035: could not set LDO9 voltage.\n");
- return 1;
- }
-
- /* TURN ON LDO9 */
- val = LDO_ON | LDO_MODE_SLEEP | LDO_MODE_ACTIVE;
-
- if (palmas_write_u8(0x48, LDO9_CTRL, val)) {
- printf("twl6035: could not turn on LDO9.\n");
- return 1;
- }
-
- return 0;
-}
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 442b7ea..0f954a5 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -53,6 +53,7 @@
COBJS-$(CONFIG_SCIF_CONSOLE) += serial_sh.o
COBJS-$(CONFIG_ZYNQ_SERIAL) += serial_zynq.o
COBJS-$(CONFIG_BFIN_SERIAL) += serial_bfin.o
+COBJS-$(CONFIG_FSL_LPUART) += serial_lpuart.o
ifndef CONFIG_SPL_BUILD
COBJS-$(CONFIG_USB_TTY) += usbtty.o
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 7f013ab..d77c25f 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -74,13 +74,8 @@
defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX) || \
defined(CONFIG_TI814X)
-#if defined(CONFIG_APTIX)
- /* /13 mode so Aptix 6MHz can hit 115200 */
- serial_out(3, &com_port->mdr1);
-#else
/* /16 is proper to hit 115200 with 48MHz */
serial_out(0, &com_port->mdr1);
-#endif
#endif /* CONFIG_OMAP */
}
diff --git a/drivers/serial/serial_lpuart.c b/drivers/serial/serial_lpuart.c
new file mode 100644
index 0000000..51d5666
--- /dev/null
+++ b/drivers/serial/serial_lpuart.c
@@ -0,0 +1,132 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <asm/io.h>
+#include <serial.h>
+#include <linux/compiler.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+
+#define US1_TDRE (1 << 7)
+#define US1_RDRF (1 << 5)
+#define UC2_TE (1 << 3)
+#define UC2_RE (1 << 2)
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct lpuart_fsl *base = (struct lpuart_fsl *)LPUART_BASE;
+
+static void lpuart_serial_setbrg(void)
+{
+ u32 clk = mxc_get_clock(MXC_UART_CLK);
+ u16 sbr;
+
+ if (!gd->baudrate)
+ gd->baudrate = CONFIG_BAUDRATE;
+
+ sbr = (u16)(clk / (16 * gd->baudrate));
+ /* place adjustment later - n/32 BRFA */
+
+ __raw_writeb(sbr >> 8, &base->ubdh);
+ __raw_writeb(sbr & 0xff, &base->ubdl);
+}
+
+static int lpuart_serial_getc(void)
+{
+ u8 status;
+
+ while (!(__raw_readb(&base->us1) & US1_RDRF))
+ WATCHDOG_RESET();
+
+ status = __raw_readb(&base->us1);
+ status |= US1_RDRF;
+ __raw_writeb(status, &base->us1);
+
+ return __raw_readb(&base->ud);
+}
+
+static void lpuart_serial_putc(const char c)
+{
+ if (c == '\n')
+ serial_putc('\r');
+
+ while (!(__raw_readb(&base->us1) & US1_TDRE))
+ WATCHDOG_RESET();
+
+ __raw_writeb(c, &base->ud);
+}
+
+/*
+ * Test whether a character is in the RX buffer
+ */
+static int lpuart_serial_tstc(void)
+{
+ if (__raw_readb(&base->urcfifo) == 0)
+ return 0;
+
+ return 1;
+}
+
+/*
+ * Initialise the serial port with the given baudrate. The settings
+ * are always 8 data bits, no parity, 1 stop bit, no start bits.
+ */
+static int lpuart_serial_init(void)
+{
+ u8 ctrl;
+
+ ctrl = __raw_readb(&base->uc2);
+ ctrl &= ~UC2_RE;
+ ctrl &= ~UC2_TE;
+ __raw_writeb(ctrl, &base->uc2);
+
+ __raw_writeb(0, &base->umodem);
+ __raw_writeb(0, &base->uc1);
+
+ /* provide data bits, parity, stop bit, etc */
+
+ serial_setbrg();
+
+ __raw_writeb(UC2_RE | UC2_TE, &base->uc2);
+
+ return 0;
+}
+
+static struct serial_device lpuart_serial_drv = {
+ .name = "lpuart_serial",
+ .start = lpuart_serial_init,
+ .stop = NULL,
+ .setbrg = lpuart_serial_setbrg,
+ .putc = lpuart_serial_putc,
+ .puts = default_serial_puts,
+ .getc = lpuart_serial_getc,
+ .tstc = lpuart_serial_tstc,
+};
+
+void lpuart_serial_initialize(void)
+{
+ serial_register(&lpuart_serial_drv);
+}
+
+__weak struct serial_device *default_serial_console(void)
+{
+ return &lpuart_serial_drv;
+}
diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c
index b92eef4..3c07da3 100644
--- a/drivers/serial/serial_ns16550.c
+++ b/drivers/serial/serial_ns16550.c
@@ -151,12 +151,7 @@
}
#endif
-#ifdef CONFIG_APTIX
-#define MODE_X_DIV 13
-#else
#define MODE_X_DIV 16
-#endif
-
/* Compute divisor value. Normally, we should simply return:
* CONFIG_SYS_NS16550_CLK) / MODE_X_DIV / gd->baudrate
* but we need to round that value by adding 0.5.
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index f4b1bad..52594e3 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -30,6 +30,15 @@
#include "atmel_spi.h"
+static int spi_has_wdrbt(struct atmel_spi_slave *slave)
+{
+ unsigned int ver;
+
+ ver = spi_readl(slave, VERSION);
+
+ return (ATMEL_SPI_VERSION_REV(ver) >= 0x210);
+}
+
void spi_init()
{
@@ -90,10 +99,10 @@
as->regs = regs;
as->mr = ATMEL_SPI_MR_MSTR | ATMEL_SPI_MR_MODFDIS
-#if defined(CONFIG_AT91SAM9X5) || defined(CONFIG_AT91SAM9M10G45)
- | ATMEL_SPI_MR_WDRBT
-#endif
| ATMEL_SPI_MR_PCS(~(1 << cs) & 0xf);
+ if (spi_has_wdrbt(as))
+ as->mr |= ATMEL_SPI_MR_WDRBT;
+
spi_writel(as, CSR(cs), csrx);
return &as->slave;
diff --git a/drivers/spi/atmel_spi.h b/drivers/spi/atmel_spi.h
index 057de9a..d240945 100644
--- a/drivers/spi/atmel_spi.h
+++ b/drivers/spi/atmel_spi.h
@@ -64,7 +64,7 @@
#define ATMEL_SPI_CSRx_DLYBCT(x) ((x) << 24)
/* Bits in VERSION */
-#define ATMEL_SPI_VERSION_REV(x) ((x) << 0)
+#define ATMEL_SPI_VERSION_REV(x) ((x) & 0xfff)
#define ATMEL_SPI_VERSION_MFN(x) ((x) << 16)
/* Constants for CSRx:BITS */
diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c
index aa999f9..db98a13 100644
--- a/drivers/spi/mxs_spi.c
+++ b/drivers/spi/mxs_spi.c
@@ -31,7 +31,7 @@
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
-#include <asm/arch/dma.h>
+#include <asm/imx-common/dma.h>
#define MXS_SPI_MAX_TIMEOUT 1000000
#define MXS_SPI_PORT_OFFSET 0x2000
diff --git a/drivers/tpm/Makefile b/drivers/tpm/Makefile
index e8c159c..913dd9c 100644
--- a/drivers/tpm/Makefile
+++ b/drivers/tpm/Makefile
@@ -25,9 +25,10 @@
$(shell mkdir -p $(obj)slb9635_i2c)
-COBJS-$(CONFIG_GENERIC_LPC_TPM) = generic_lpc_tpm.o
-COBJS-$(CONFIG_INFINEON_TPM_I2C) += tis_i2c.o slb9635_i2c/tpm.o
-COBJS-$(CONFIG_INFINEON_TPM_I2C) += slb9635_i2c/tpm_tis_i2c.o
+# TODO: Merge tpm_tis_lpc.c with tpm.c
+COBJS-$(CONFIG_TPM_TIS_I2C) += tpm.o
+COBJS-$(CONFIG_TPM_TIS_I2C) += tpm_tis_i2c.o
+COBJS-$(CONFIG_TPM_TIS_LPC) += tpm_tis_lpc.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/tpm/slb9635_i2c/compatibility.h b/drivers/tpm/slb9635_i2c/compatibility.h
deleted file mode 100644
index 62dc9fa..0000000
--- a/drivers/tpm/slb9635_i2c/compatibility.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright (C) 2011 Infineon Technologies
- *
- * Authors:
- * Peter Huewe <huewe.external@infineon.com>
- *
- * Version: 2.1.1
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _COMPATIBILITY_H_
-#define _COMPATIBILITY_H_
-
-/* all includes from U-Boot */
-#include <linux/types.h>
-#include <linux/unaligned/be_byteshift.h>
-#include <asm-generic/errno.h>
-#include <compiler.h>
-#include <common.h>
-
-/* extended error numbers from linux (see errno.h) */
-#define ECANCELED 125 /* Operation Canceled */
-
-#define msleep(t) udelay((t)*1000)
-
-/* Timer frequency. Corresponds to msec timer resolution*/
-#define HZ 1000
-
-#define dev_dbg(dev, format, arg...) debug(format, ##arg)
-#define dev_err(dev, format, arg...) printf(format, ##arg)
-#define dev_info(dev, format, arg...) debug(format, ##arg)
-#define dbg_printf debug
-
-#endif
diff --git a/drivers/tpm/slb9635_i2c/tpm_tis_i2c.c b/drivers/tpm/slb9635_i2c/tpm_tis_i2c.c
deleted file mode 100644
index 82a41bf..0000000
--- a/drivers/tpm/slb9635_i2c/tpm_tis_i2c.c
+++ /dev/null
@@ -1,561 +0,0 @@
-/*
- * Copyright (C) 2011 Infineon Technologies
- *
- * Authors:
- * Peter Huewe <huewe.external@infineon.com>
- *
- * Description:
- * Device driver for TCG/TCPA TPM (trusted platform module).
- * Specifications at www.trustedcomputinggroup.org
- *
- * This device driver implements the TPM interface as defined in
- * the TCG TPM Interface Spec version 1.2, revision 1.0 and the
- * Infineon I2C Protocol Stack Specification v0.20.
- *
- * It is based on the Linux kernel driver tpm.c from Leendert van
- * Dorn, Dave Safford, Reiner Sailer, and Kyleen Hall.
- *
- * Version: 2.1.1
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation, version 2 of the
- * License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <linux/types.h>
-
-#include "compatibility.h"
-#include "tpm.h"
-
-/* max. buffer size supported by our tpm */
-#ifdef TPM_BUFSIZE
-#undef TPM_BUFSIZE
-#endif
-#define TPM_BUFSIZE 1260
-/* Address of the TPM on the I2C bus */
-#define TPM_I2C_ADDR 0x20
-/* max. number of iterations after i2c NAK */
-#define MAX_COUNT 3
-
-#define SLEEP_DURATION 60 /*in usec*/
-
-/* max. number of iterations after i2c NAK for 'long' commands
- * we need this especially for sending TPM_READY, since the cleanup after the
- * transtion to the ready state may take some time, but it is unpredictable
- * how long it will take.
- */
-#define MAX_COUNT_LONG 50
-
-#define SLEEP_DURATION_LONG 210 /* in usec */
-
-/* expected value for DIDVID register */
-#define TPM_TIS_I2C_DID_VID 0x000b15d1L
-
-/* Structure to store I2C TPM specific stuff */
-struct tpm_inf_dev {
- uint addr;
- u8 buf[TPM_BUFSIZE + sizeof(u8)]; /* max. buffer size + addr */
-};
-
-static struct tpm_inf_dev tpm_dev = {
- .addr = TPM_I2C_ADDR
-};
-
-/*
- * iic_tpm_read() - read from TPM register
- * @addr: register address to read from
- * @buffer: provided by caller
- * @len: number of bytes to read
- *
- * Read len bytes from TPM register and put them into
- * buffer (little-endian format, i.e. first byte is put into buffer[0]).
- *
- * NOTE: TPM is big-endian for multi-byte values. Multi-byte
- * values have to be swapped.
- *
- * Return -EIO on error, 0 on success.
- */
-int iic_tpm_read(u8 addr, u8 *buffer, size_t len)
-{
- int rc;
- int count;
- uint myaddr = addr;
- /* we have to use uint here, uchar hangs the board */
-
- for (count = 0; count < MAX_COUNT; count++) {
- rc = i2c_write(tpm_dev.addr, 0, 0, (uchar *)&myaddr, 1);
- if (rc == 0)
- break; /*success, break to skip sleep*/
-
- udelay(SLEEP_DURATION);
- }
-
- if (rc)
- return -rc;
-
- /* After the TPM has successfully received the register address it needs
- * some time, thus we're sleeping here again, before retrieving the data
- */
- for (count = 0; count < MAX_COUNT; count++) {
- udelay(SLEEP_DURATION);
- rc = i2c_read(tpm_dev.addr, 0, 0, buffer, len);
- if (rc == 0)
- break; /*success, break to skip sleep*/
- }
-
- if (rc)
- return -rc;
-
- return 0;
-}
-
-static int iic_tpm_write_generic(u8 addr, u8 *buffer, size_t len,
- unsigned int sleep_time,
- u8 max_count)
-{
- int rc = 0;
- int count;
-
- /* prepare send buffer */
- tpm_dev.buf[0] = addr;
- memcpy(&(tpm_dev.buf[1]), buffer, len);
-
- for (count = 0; count < max_count; count++) {
- rc = i2c_write(tpm_dev.addr, 0, 0, tpm_dev.buf, len + 1);
- if (rc == 0)
- break; /*success, break to skip sleep*/
-
- udelay(sleep_time);
- }
-
- if (rc)
- return -rc;
-
- return 0;
-}
-
-/*
- * iic_tpm_write() - write to TPM register
- * @addr: register address to write to
- * @buffer: containing data to be written
- * @len: number of bytes to write
- *
- * Write len bytes from provided buffer to TPM register (little
- * endian format, i.e. buffer[0] is written as first byte).
- *
- * NOTE: TPM is big-endian for multi-byte values. Multi-byte
- * values have to be swapped.
- *
- * NOTE: use this function instead of the iic_tpm_write_generic function.
- *
- * Return -EIO on error, 0 on success
- */
-static int iic_tpm_write(u8 addr, u8 *buffer, size_t len)
-{
- return iic_tpm_write_generic(addr, buffer, len, SLEEP_DURATION,
- MAX_COUNT);
-}
-
-/*
- * This function is needed especially for the cleanup situation after
- * sending TPM_READY
- * */
-static int iic_tpm_write_long(u8 addr, u8 *buffer, size_t len)
-{
- return iic_tpm_write_generic(addr, buffer, len, SLEEP_DURATION_LONG,
- MAX_COUNT_LONG);
-}
-
-#define TPM_HEADER_SIZE 10
-
-enum tis_access {
- TPM_ACCESS_VALID = 0x80,
- TPM_ACCESS_ACTIVE_LOCALITY = 0x20,
- TPM_ACCESS_REQUEST_PENDING = 0x04,
- TPM_ACCESS_REQUEST_USE = 0x02,
-};
-
-enum tis_status {
- TPM_STS_VALID = 0x80,
- TPM_STS_COMMAND_READY = 0x40,
- TPM_STS_GO = 0x20,
- TPM_STS_DATA_AVAIL = 0x10,
- TPM_STS_DATA_EXPECT = 0x08,
-};
-
-enum tis_defaults {
- TIS_SHORT_TIMEOUT = 750, /* ms */
- TIS_LONG_TIMEOUT = 2000, /* 2 sec */
-};
-
-#define TPM_ACCESS(l) (0x0000 | ((l) << 4))
-#define TPM_STS(l) (0x0001 | ((l) << 4))
-#define TPM_DATA_FIFO(l) (0x0005 | ((l) << 4))
-#define TPM_DID_VID(l) (0x0006 | ((l) << 4))
-
-static int check_locality(struct tpm_chip *chip, int loc)
-{
- u8 buf;
- int rc;
-
- rc = iic_tpm_read(TPM_ACCESS(loc), &buf, 1);
- if (rc < 0)
- return rc;
-
- if ((buf & (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) ==
- (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) {
- chip->vendor.locality = loc;
- return loc;
- }
-
- return -1;
-}
-
-static void release_locality(struct tpm_chip *chip, int loc, int force)
-{
- u8 buf;
- if (iic_tpm_read(TPM_ACCESS(loc), &buf, 1) < 0)
- return;
-
- if (force || (buf & (TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID)) ==
- (TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID)) {
- buf = TPM_ACCESS_ACTIVE_LOCALITY;
- iic_tpm_write(TPM_ACCESS(loc), &buf, 1);
- }
-}
-
-static int request_locality(struct tpm_chip *chip, int loc)
-{
- unsigned long start, stop;
- u8 buf = TPM_ACCESS_REQUEST_USE;
-
- if (check_locality(chip, loc) >= 0)
- return loc; /* we already have the locality */
-
- iic_tpm_write(TPM_ACCESS(loc), &buf, 1);
-
- /* wait for burstcount */
- start = get_timer(0);
- stop = chip->vendor.timeout_a;
- do {
- if (check_locality(chip, loc) >= 0)
- return loc;
- msleep(TPM_TIMEOUT);
- } while (get_timer(start) < stop);
-
- return -1;
-}
-
-static u8 tpm_tis_i2c_status(struct tpm_chip *chip)
-{
- /* NOTE: since i2c read may fail, return 0 in this case --> time-out */
- u8 buf;
- if (iic_tpm_read(TPM_STS(chip->vendor.locality), &buf, 1) < 0)
- return 0;
- else
- return buf;
-}
-
-static void tpm_tis_i2c_ready(struct tpm_chip *chip)
-{
- /* this causes the current command to be aborted */
- u8 buf = TPM_STS_COMMAND_READY;
- iic_tpm_write_long(TPM_STS(chip->vendor.locality), &buf, 1);
-}
-
-static ssize_t get_burstcount(struct tpm_chip *chip)
-{
- unsigned long start, stop;
- ssize_t burstcnt;
- u8 buf[3];
-
- /* wait for burstcount */
- /* which timeout value, spec has 2 answers (c & d) */
- start = get_timer(0);
- stop = chip->vendor.timeout_d;
- do {
- /* Note: STS is little endian */
- if (iic_tpm_read(TPM_STS(chip->vendor.locality) + 1, buf, 3)
- < 0)
- burstcnt = 0;
- else
- burstcnt = (buf[2] << 16) + (buf[1] << 8) + buf[0];
-
- if (burstcnt)
- return burstcnt;
- msleep(TPM_TIMEOUT);
- } while (get_timer(start) < stop);
-
- return -EBUSY;
-}
-
-static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout,
- int *status)
-{
- unsigned long start, stop;
-
- /* check current status */
- *status = tpm_tis_i2c_status(chip);
- if ((*status & mask) == mask)
- return 0;
-
- start = get_timer(0);
- stop = timeout;
- do {
- msleep(TPM_TIMEOUT);
- *status = tpm_tis_i2c_status(chip);
- if ((*status & mask) == mask)
- return 0;
-
- } while (get_timer(start) < stop);
-
- return -ETIME;
-}
-
-static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count)
-{
- size_t size = 0;
- ssize_t burstcnt;
- int rc;
-
- while (size < count) {
- burstcnt = get_burstcount(chip);
-
- /* burstcount < 0 = tpm is busy */
- if (burstcnt < 0)
- return burstcnt;
-
- /* limit received data to max. left */
- if (burstcnt > (count - size))
- burstcnt = count - size;
-
- rc = iic_tpm_read(TPM_DATA_FIFO(chip->vendor.locality),
- &(buf[size]),
- burstcnt);
- if (rc == 0)
- size += burstcnt;
- }
-
- return size;
-}
-
-static int tpm_tis_i2c_recv(struct tpm_chip *chip, u8 *buf, size_t count)
-{
- int size = 0;
- int expected, status;
-
- if (count < TPM_HEADER_SIZE) {
- size = -EIO;
- goto out;
- }
-
- /* read first 10 bytes, including tag, paramsize, and result */
- size = recv_data(chip, buf, TPM_HEADER_SIZE);
- if (size < TPM_HEADER_SIZE) {
- dev_err(chip->dev, "Unable to read header\n");
- goto out;
- }
-
- expected = get_unaligned_be32(buf + TPM_RSP_SIZE_BYTE);
- if ((size_t)expected > count) {
- size = -EIO;
- goto out;
- }
-
- size += recv_data(chip, &buf[TPM_HEADER_SIZE],
- expected - TPM_HEADER_SIZE);
- if (size < expected) {
- dev_err(chip->dev, "Unable to read remainder of result\n");
- size = -ETIME;
- goto out;
- }
-
- wait_for_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c, &status);
- if (status & TPM_STS_DATA_AVAIL) { /* retry? */
- dev_err(chip->dev, "Error left over data\n");
- size = -EIO;
- goto out;
- }
-
-out:
- tpm_tis_i2c_ready(chip);
- /* The TPM needs some time to clean up here,
- * so we sleep rather than keeping the bus busy
- */
- udelay(2000);
- release_locality(chip, chip->vendor.locality, 0);
-
- return size;
-}
-
-static int tpm_tis_i2c_send(struct tpm_chip *chip, u8 *buf, size_t len)
-{
- int rc, status;
- ssize_t burstcnt;
- size_t count = 0;
- u8 sts = TPM_STS_GO;
-
- if (len > TPM_BUFSIZE)
- return -E2BIG; /* command is too long for our tpm, sorry */
-
- if (request_locality(chip, 0) < 0)
- return -EBUSY;
-
- status = tpm_tis_i2c_status(chip);
- if ((status & TPM_STS_COMMAND_READY) == 0) {
- tpm_tis_i2c_ready(chip);
- if (wait_for_stat
- (chip, TPM_STS_COMMAND_READY,
- chip->vendor.timeout_b, &status) < 0) {
- rc = -ETIME;
- goto out_err;
- }
- }
-
- while (count < len - 1) {
- burstcnt = get_burstcount(chip);
-
- /* burstcount < 0 = tpm is busy */
- if (burstcnt < 0)
- return burstcnt;
-
- if (burstcnt > (len-1-count))
- burstcnt = len-1-count;
-
-#ifdef CONFIG_TPM_I2C_BURST_LIMITATION
- if (burstcnt > CONFIG_TPM_I2C_BURST_LIMITATION)
- burstcnt = CONFIG_TPM_I2C_BURST_LIMITATION;
-#endif /* CONFIG_TPM_I2C_BURST_LIMITATION */
-
- rc = iic_tpm_write(TPM_DATA_FIFO(chip->vendor.locality),
- &(buf[count]), burstcnt);
- if (rc == 0)
- count += burstcnt;
-
- wait_for_stat(chip, TPM_STS_VALID,
- chip->vendor.timeout_c, &status);
-
- if ((status & TPM_STS_DATA_EXPECT) == 0) {
- rc = -EIO;
- goto out_err;
- }
- }
-
- /* write last byte */
- iic_tpm_write(TPM_DATA_FIFO(chip->vendor.locality), &(buf[count]), 1);
- wait_for_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c, &status);
- if ((status & TPM_STS_DATA_EXPECT) != 0) {
- rc = -EIO;
- goto out_err;
- }
-
- /* go and do it */
- iic_tpm_write(TPM_STS(chip->vendor.locality), &sts, 1);
-
- return len;
-out_err:
- tpm_tis_i2c_ready(chip);
- /* The TPM needs some time to clean up here,
- * so we sleep rather than keeping the bus busy
- */
- udelay(2000);
- release_locality(chip, chip->vendor.locality, 0);
-
- return rc;
-}
-
-static struct tpm_vendor_specific tpm_tis_i2c = {
- .status = tpm_tis_i2c_status,
- .recv = tpm_tis_i2c_recv,
- .send = tpm_tis_i2c_send,
- .cancel = tpm_tis_i2c_ready,
- .req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
- .req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
- .req_canceled = TPM_STS_COMMAND_READY,
-};
-
-/* initialisation of i2c tpm */
-
-
-int tpm_vendor_init(uint32_t dev_addr)
-{
- u32 vendor;
- uint old_addr;
- int rc = 0;
- struct tpm_chip *chip;
-
- old_addr = tpm_dev.addr;
- if (dev_addr != 0)
- tpm_dev.addr = dev_addr;
-
- chip = tpm_register_hardware(&tpm_tis_i2c);
- if (chip < 0) {
- rc = -ENODEV;
- goto out_err;
- }
-
- /* Disable interrupts (not supported) */
- chip->vendor.irq = 0;
-
- /* Default timeouts */
- chip->vendor.timeout_a = TIS_SHORT_TIMEOUT;
- chip->vendor.timeout_b = TIS_LONG_TIMEOUT;
- chip->vendor.timeout_c = TIS_SHORT_TIMEOUT;
- chip->vendor.timeout_d = TIS_SHORT_TIMEOUT;
-
- if (request_locality(chip, 0) != 0) {
- rc = -ENODEV;
- goto out_err;
- }
-
- /* read four bytes from DID_VID register */
- if (iic_tpm_read(TPM_DID_VID(0), (uchar *)&vendor, 4) < 0) {
- rc = -EIO;
- goto out_release;
- }
-
- /* create DID_VID register value, after swapping to little-endian */
- vendor = be32_to_cpu(vendor);
-
- if (vendor != TPM_TIS_I2C_DID_VID) {
- rc = -ENODEV;
- goto out_release;
- }
-
- dev_info(dev, "1.2 TPM (device-id 0x%X)\n", vendor >> 16);
-
- /*
- * A timeout query to TPM can be placed here.
- * Standard timeout values are used so far
- */
-
- return 0;
-
-out_release:
- release_locality(chip, 0, 1);
-
-out_err:
- tpm_dev.addr = old_addr;
- return rc;
-}
-
-void tpm_vendor_cleanup(struct tpm_chip *chip)
-{
- release_locality(chip, chip->vendor.locality, 1);
-}
diff --git a/drivers/tpm/tis_i2c.c b/drivers/tpm/tis_i2c.c
index e818fba..22554e1 100644
--- a/drivers/tpm/tis_i2c.c
+++ b/drivers/tpm/tis_i2c.c
@@ -68,6 +68,10 @@
node = fdtdec_next_compatible(blob, 0, COMPAT_INFINEON_SLB9635_TPM);
if (node < 0) {
+ node = fdtdec_next_compatible(blob, 0,
+ COMPAT_INFINEON_SLB9645_TPM);
+ }
+ if (node < 0) {
debug("%s: Node not found\n", __func__);
return -1;
}
diff --git a/drivers/tpm/slb9635_i2c/tpm.c b/drivers/tpm/tpm.c
similarity index 63%
rename from drivers/tpm/slb9635_i2c/tpm.c
rename to drivers/tpm/tpm.c
index 496c48e..b657334 100644
--- a/drivers/tpm/slb9635_i2c/tpm.c
+++ b/drivers/tpm/tpm.c
@@ -32,11 +32,30 @@
* MA 02111-1307 USA
*/
-#include <malloc.h>
-#include "tpm.h"
+#include <config.h>
+#include <common.h>
+#include <compiler.h>
+#include <fdtdec.h>
+#include <i2c.h>
+#include <tpm.h>
+#include <asm-generic/errno.h>
+#include <linux/types.h>
+#include <linux/unaligned/be_byteshift.h>
-/* global structure for tpm chip data */
-struct tpm_chip g_chip;
+#include "tpm_private.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* TPM configuration */
+struct tpm {
+ int i2c_bus;
+ int slave_addr;
+ char inited;
+ int old_bus;
+} tpm;
+
+/* Global structure for tpm chip data */
+static struct tpm_chip g_chip;
enum tpm_duration {
TPM_SHORT = 0,
@@ -45,9 +64,18 @@
TPM_UNDEFINED,
};
-#define TPM_MAX_ORDINAL 243
-#define TPM_MAX_PROTECTED_ORDINAL 12
-#define TPM_PROTECTED_ORDINAL_MASK 0xFF
+/* Extended error numbers from linux (see errno.h) */
+#define ECANCELED 125 /* Operation Canceled */
+
+/* Timer frequency. Corresponds to msec timer resolution*/
+#define HZ 1000
+
+#define TPM_MAX_ORDINAL 243
+#define TPM_MAX_PROTECTED_ORDINAL 12
+#define TPM_PROTECTED_ORDINAL_MASK 0xFF
+
+#define TPM_CMD_COUNT_BYTE 2
+#define TPM_CMD_ORDINAL_BYTE 6
/*
* Array with one entry per ordinal defining the maximum amount
@@ -318,34 +346,31 @@
TPM_MEDIUM,
};
-/*
- * Returns max number of milliseconds to wait
- */
-unsigned long tpm_calc_ordinal_duration(struct tpm_chip *chip, u32 ordinal)
+/* Returns max number of milliseconds to wait */
+static unsigned long tpm_calc_ordinal_duration(struct tpm_chip *chip,
+ u32 ordinal)
{
int duration_idx = TPM_UNDEFINED;
int duration = 0;
- if (ordinal < TPM_MAX_ORDINAL)
+ if (ordinal < TPM_MAX_ORDINAL) {
duration_idx = tpm_ordinal_duration[ordinal];
- else if ((ordinal & TPM_PROTECTED_ORDINAL_MASK) <
- TPM_MAX_PROTECTED_ORDINAL)
- duration_idx =
- tpm_protected_ordinal_duration[ordinal &
- TPM_PROTECTED_ORDINAL_MASK];
+ } else if ((ordinal & TPM_PROTECTED_ORDINAL_MASK) <
+ TPM_MAX_PROTECTED_ORDINAL) {
+ duration_idx = tpm_protected_ordinal_duration[
+ ordinal & TPM_PROTECTED_ORDINAL_MASK];
+ }
if (duration_idx != TPM_UNDEFINED)
duration = chip->vendor.duration[duration_idx];
+
if (duration <= 0)
- return 2 * 60 * HZ; /*two minutes timeout*/
+ return 2 * 60 * HZ; /* Two minutes timeout */
else
return duration;
}
-#define TPM_CMD_COUNT_BYTE 2
-#define TPM_CMD_ORDINAL_BYTE 6
-
-ssize_t tpm_transmit(const unsigned char *buf, size_t bufsiz)
+static ssize_t tpm_transmit(const unsigned char *buf, size_t bufsiz)
{
ssize_t rc;
u32 count, ordinal;
@@ -358,18 +383,17 @@
ordinal = get_unaligned_be32(buf + TPM_CMD_ORDINAL_BYTE);
if (count == 0) {
- dev_err(chip->dev, "no data\n");
+ error("no data\n");
return -ENODATA;
}
if (count > bufsiz) {
- dev_err(chip->dev,
- "invalid count value %x %zx\n", count, bufsiz);
+ error("invalid count value %x %zx\n", count, bufsiz);
return -E2BIG;
}
rc = chip->vendor.send(chip, (u8 *)buf, count);
if (rc < 0) {
- dev_err(chip->dev, "tpm_transmit: tpm_send: error %zd\n", rc);
+ error("tpm_transmit: tpm_send: error %zd\n", rc);
goto out;
}
@@ -379,47 +403,126 @@
start = get_timer(0);
stop = tpm_calc_ordinal_duration(chip, ordinal);
do {
- dbg_printf("waiting for status...\n");
+ debug("waiting for status...\n");
u8 status = chip->vendor.status(chip);
if ((status & chip->vendor.req_complete_mask) ==
chip->vendor.req_complete_val) {
- dbg_printf("...got it;\n");
+ debug("...got it;\n");
goto out_recv;
}
if ((status == chip->vendor.req_canceled)) {
- dev_err(chip->dev, "Operation Canceled\n");
+ error("Operation Canceled\n");
rc = -ECANCELED;
goto out;
}
- msleep(TPM_TIMEOUT);
+ udelay(TPM_TIMEOUT * 1000);
} while (get_timer(start) < stop);
chip->vendor.cancel(chip);
- dev_err(chip->dev, "Operation Timed out\n");
+ error("Operation Timed out\n");
rc = -ETIME;
goto out;
out_recv:
-
- dbg_printf("out_recv: reading response...\n");
+ debug("out_recv: reading response...\n");
rc = chip->vendor.recv(chip, (u8 *)buf, TPM_BUFSIZE);
if (rc < 0)
- dev_err(chip->dev, "tpm_transmit: tpm_recv: error %zd\n", rc);
+ error("tpm_transmit: tpm_recv: error %zd\n", rc);
+
out:
return rc;
}
-#define TPM_ERROR_SIZE 10
+static int tpm_open(uint32_t dev_addr)
+{
+ int rc;
+ if (g_chip.is_open)
+ return -EBUSY;
+ rc = tpm_vendor_init(dev_addr);
+ if (rc < 0)
+ g_chip.is_open = 0;
+ return rc;
+}
-enum tpm_capabilities {
- TPM_CAP_PROP = cpu_to_be32(5),
-};
+static void tpm_close(void)
+{
+ if (g_chip.is_open) {
+ tpm_vendor_cleanup(&g_chip);
+ g_chip.is_open = 0;
+ }
+}
-enum tpm_sub_capabilities {
- TPM_CAP_PROP_TIS_TIMEOUT = cpu_to_be32(0x115),
- TPM_CAP_PROP_TIS_DURATION = cpu_to_be32(0x120),
-};
+static int tpm_select(void)
+{
+ int ret;
+
+ tpm.old_bus = i2c_get_bus_num();
+ if (tpm.old_bus != tpm.i2c_bus) {
+ ret = i2c_set_bus_num(tpm.i2c_bus);
+ if (ret) {
+ debug("%s: Fail to set i2c bus %d\n", __func__,
+ tpm.i2c_bus);
+ return -1;
+ }
+ }
+ return 0;
+}
+
+static int tpm_deselect(void)
+{
+ int ret;
+
+ if (tpm.old_bus != i2c_get_bus_num()) {
+ ret = i2c_set_bus_num(tpm.old_bus);
+ if (ret) {
+ debug("%s: Fail to restore i2c bus %d\n",
+ __func__, tpm.old_bus);
+ return -1;
+ }
+ }
+ tpm.old_bus = -1;
+ return 0;
+}
+
+/**
+ * Decode TPM configuration.
+ *
+ * @param dev Returns a configuration of TPM device
+ * @return 0 if ok, -1 on error
+ */
+static int tpm_decode_config(struct tpm *dev)
+{
+#ifdef CONFIG_OF_CONTROL
+ const void *blob = gd->fdt_blob;
+ int node, parent;
+ int i2c_bus;
+
+ node = fdtdec_next_compatible(blob, 0, COMPAT_INFINEON_SLB9635_TPM);
+ if (node < 0) {
+ node = fdtdec_next_compatible(blob, 0,
+ COMPAT_INFINEON_SLB9645_TPM);
+ }
+ if (node < 0) {
+ debug("%s: Node not found\n", __func__);
+ return -1;
+ }
+ parent = fdt_parent_offset(blob, node);
+ if (parent < 0) {
+ debug("%s: Cannot find node parent\n", __func__);
+ return -1;
+ }
+ i2c_bus = i2c_get_bus_num_fdt(parent);
+ if (i2c_bus < 0)
+ return -1;
+ dev->i2c_bus = i2c_bus;
+ dev->slave_addr = fdtdec_get_addr(blob, node, "reg");
+#else
+ dev->i2c_bus = CONFIG_TPM_TIS_I2C_BUS_NUMBER;
+ dev->slave_addr = CONFIG_TPM_TIS_I2C_SLAVE_ADDRESS;
+#endif
+ return 0;
+}
struct tpm_chip *tpm_register_hardware(const struct tpm_vendor_specific *entry)
{
@@ -433,21 +536,94 @@
return chip;
}
-int tpm_open(uint32_t dev_addr)
+int tis_init(void)
+{
+ if (tpm.inited)
+ return 0;
+
+ if (tpm_decode_config(&tpm))
+ return -1;
+
+ if (tpm_select())
+ return -1;
+
+ /*
+ * Probe TPM twice; the first probing might fail because TPM is asleep,
+ * and the probing can wake up TPM.
+ */
+ if (i2c_probe(tpm.slave_addr) && i2c_probe(tpm.slave_addr)) {
+ debug("%s: fail to probe i2c addr 0x%x\n", __func__,
+ tpm.slave_addr);
+ return -1;
+ }
+
+ tpm_deselect();
+
+ tpm.inited = 1;
+
+ return 0;
+}
+
+int tis_open(void)
{
int rc;
- if (g_chip.is_open)
- return -EBUSY;
- rc = tpm_vendor_init(dev_addr);
- if (rc < 0)
- g_chip.is_open = 0;
+
+ if (!tpm.inited)
+ return -1;
+
+ if (tpm_select())
+ return -1;
+
+ rc = tpm_open(tpm.slave_addr);
+
+ tpm_deselect();
+
return rc;
}
-void tpm_close(void)
+int tis_close(void)
{
- if (g_chip.is_open) {
- tpm_vendor_cleanup(&g_chip);
- g_chip.is_open = 0;
+ if (!tpm.inited)
+ return -1;
+
+ if (tpm_select())
+ return -1;
+
+ tpm_close();
+
+ tpm_deselect();
+
+ return 0;
+}
+
+int tis_sendrecv(const uint8_t *sendbuf, size_t sbuf_size,
+ uint8_t *recvbuf, size_t *rbuf_len)
+{
+ int len;
+ uint8_t buf[4096];
+
+ if (!tpm.inited)
+ return -1;
+
+ if (sizeof(buf) < sbuf_size)
+ return -1;
+
+ memcpy(buf, sendbuf, sbuf_size);
+
+ if (tpm_select())
+ return -1;
+
+ len = tpm_transmit(buf, sbuf_size);
+
+ tpm_deselect();
+
+ if (len < 10) {
+ *rbuf_len = 0;
+ return -1;
}
+
+ memcpy(recvbuf, buf, len);
+ *rbuf_len = len;
+
+ return 0;
}
diff --git a/drivers/tpm/slb9635_i2c/tpm.h b/drivers/tpm/tpm_private.h
similarity index 71%
rename from drivers/tpm/slb9635_i2c/tpm.h
rename to drivers/tpm/tpm_private.h
index 9ddee86..888a074 100644
--- a/drivers/tpm/slb9635_i2c/tpm.h
+++ b/drivers/tpm/tpm_private.h
@@ -33,12 +33,11 @@
* MA 02111-1307 USA
*/
-#ifndef _TPM_H_
-#define _TPM_H_
+#ifndef _TPM_PRIVATE_H_
+#define _TPM_PRIVATE_H_
#include <linux/compiler.h>
-
-#include "compatibility.h"
+#include <linux/types.h>
enum tpm_timeout {
TPM_TIMEOUT = 5, /* msecs */
@@ -47,13 +46,9 @@
/* Size of external transmit buffer (used in tpm_transmit)*/
#define TPM_BUFSIZE 4096
-/* Index of fields in TPM command buffer */
-#define TPM_CMD_SIZE_BYTE 2
-#define TPM_CMD_ORDINAL_BYTE 6
-
/* Index of Count field in TPM response buffer */
-#define TPM_RSP_SIZE_BYTE 2
-#define TPM_RSP_RC_BYTE 6
+#define TPM_RSP_SIZE_BYTE 2
+#define TPM_RSP_RC_BYTE 6
struct tpm_chip;
@@ -65,10 +60,10 @@
int (*recv) (struct tpm_chip *, u8 *, size_t);
int (*send) (struct tpm_chip *, u8 *, size_t);
void (*cancel) (struct tpm_chip *);
- u8(*status) (struct tpm_chip *);
+ u8(*status) (struct tpm_chip *);
int locality;
- unsigned long timeout_a, timeout_b, timeout_c, timeout_d; /* msec */
- unsigned long duration[3]; /* msec */
+ unsigned long timeout_a, timeout_b, timeout_c, timeout_d; /* msec */
+ unsigned long duration[3]; /* msec */
};
struct tpm_chip {
@@ -132,30 +127,11 @@
union tpm_cmd_params params;
} __packed;
+struct tpm_chip *tpm_register_hardware(const struct tpm_vendor_specific *);
-/* ---------- Interface for TPM vendor ------------ */
+int tpm_vendor_init(uint32_t dev_addr);
-extern struct tpm_chip *tpm_register_hardware(
- const struct tpm_vendor_specific *);
+void tpm_vendor_cleanup(struct tpm_chip *chip);
-extern int tpm_vendor_init(uint32_t dev_addr);
-
-extern void tpm_vendor_cleanup(struct tpm_chip *chip);
-
-/* ---------- Interface for TDDL ------------------- */
-
-/*
- * if dev_addr != 0 - redefines TPM device address
- * Returns < 0 on error, 0 on success.
- */
-extern int tpm_open(uint32_t dev_addr);
-
-extern void tpm_close(void);
-
-/*
- * Transmit bufsiz bytes out of buf to TPM and get results back in buf, too.
- * Returns < 0 on error, 0 on success.
- */
-extern ssize_t tpm_transmit(const unsigned char *buf, size_t bufsiz);
#endif
diff --git a/drivers/tpm/tpm_tis_i2c.c b/drivers/tpm/tpm_tis_i2c.c
new file mode 100644
index 0000000..2dd8501
--- /dev/null
+++ b/drivers/tpm/tpm_tis_i2c.c
@@ -0,0 +1,637 @@
+/*
+ * Copyright (C) 2011 Infineon Technologies
+ *
+ * Authors:
+ * Peter Huewe <huewe.external@infineon.com>
+ *
+ * Description:
+ * Device driver for TCG/TCPA TPM (trusted platform module).
+ * Specifications at www.trustedcomputinggroup.org
+ *
+ * This device driver implements the TPM interface as defined in
+ * the TCG TPM Interface Spec version 1.2, revision 1.0 and the
+ * Infineon I2C Protocol Stack Specification v0.20.
+ *
+ * It is based on the Linux kernel driver tpm.c from Leendert van
+ * Dorn, Dave Safford, Reiner Sailer, and Kyleen Hall.
+ *
+ * Version: 2.1.1
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <compiler.h>
+#include <i2c.h>
+#include <tpm.h>
+#include <asm-generic/errno.h>
+#include <linux/types.h>
+#include <linux/unaligned/be_byteshift.h>
+
+#include "tpm_private.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Address of the TPM on the I2C bus */
+#define TPM_I2C_ADDR 0x20
+
+/* Max buffer size supported by our tpm */
+#define TPM_DEV_BUFSIZE 1260
+
+/* Max number of iterations after i2c NAK */
+#define MAX_COUNT 3
+
+/*
+ * Max number of iterations after i2c NAK for 'long' commands
+ *
+ * We need this especially for sending TPM_READY, since the cleanup after the
+ * transtion to the ready state may take some time, but it is unpredictable
+ * how long it will take.
+ */
+#define MAX_COUNT_LONG 50
+
+#define SLEEP_DURATION 60 /* in usec */
+#define SLEEP_DURATION_LONG 210 /* in usec */
+
+#define TPM_HEADER_SIZE 10
+
+/*
+ * Expected value for DIDVID register
+ *
+ * The only device the system knows about at this moment is Infineon slb9635.
+ */
+#define TPM_TIS_I2C_DID_VID 0x000b15d1L
+
+enum tis_access {
+ TPM_ACCESS_VALID = 0x80,
+ TPM_ACCESS_ACTIVE_LOCALITY = 0x20,
+ TPM_ACCESS_REQUEST_PENDING = 0x04,
+ TPM_ACCESS_REQUEST_USE = 0x02,
+};
+
+enum tis_status {
+ TPM_STS_VALID = 0x80,
+ TPM_STS_COMMAND_READY = 0x40,
+ TPM_STS_GO = 0x20,
+ TPM_STS_DATA_AVAIL = 0x10,
+ TPM_STS_DATA_EXPECT = 0x08,
+};
+
+enum tis_defaults {
+ TIS_SHORT_TIMEOUT = 750, /* ms */
+ TIS_LONG_TIMEOUT = 2000, /* ms */
+};
+
+/* expected value for DIDVID register */
+#define TPM_TIS_I2C_DID_VID_9635 0x000b15d1L
+#define TPM_TIS_I2C_DID_VID_9645 0x001a15d1L
+
+enum i2c_chip_type {
+ SLB9635,
+ SLB9645,
+ UNKNOWN,
+};
+
+static const char * const chip_name[] = {
+ [SLB9635] = "slb9635tt",
+ [SLB9645] = "slb9645tt",
+ [UNKNOWN] = "unknown/fallback to slb9635",
+};
+
+#define TPM_ACCESS(l) (0x0000 | ((l) << 4))
+#define TPM_STS(l) (0x0001 | ((l) << 4))
+#define TPM_DATA_FIFO(l) (0x0005 | ((l) << 4))
+#define TPM_DID_VID(l) (0x0006 | ((l) << 4))
+
+/* Structure to store I2C TPM specific stuff */
+struct tpm_dev {
+ uint addr;
+ u8 buf[TPM_DEV_BUFSIZE + sizeof(u8)]; /* Max buffer size + addr */
+ enum i2c_chip_type chip_type;
+};
+
+static struct tpm_dev tpm_dev = {
+ .addr = TPM_I2C_ADDR
+};
+
+static struct tpm_dev tpm_dev;
+
+/*
+ * iic_tpm_read() - read from TPM register
+ * @addr: register address to read from
+ * @buffer: provided by caller
+ * @len: number of bytes to read
+ *
+ * Read len bytes from TPM register and put them into
+ * buffer (little-endian format, i.e. first byte is put into buffer[0]).
+ *
+ * NOTE: TPM is big-endian for multi-byte values. Multi-byte
+ * values have to be swapped.
+ *
+ * Return -EIO on error, 0 on success.
+ */
+static int iic_tpm_read(u8 addr, u8 *buffer, size_t len)
+{
+ int rc;
+ int count;
+ uint32_t addrbuf = addr;
+
+ if ((tpm_dev.chip_type == SLB9635) || (tpm_dev.chip_type == UNKNOWN)) {
+ /* slb9635 protocol should work in both cases */
+ for (count = 0; count < MAX_COUNT; count++) {
+ rc = i2c_write(tpm_dev.addr, 0, 0,
+ (uchar *)&addrbuf, 1);
+ if (rc == 0)
+ break; /* Success, break to skip sleep */
+ udelay(SLEEP_DURATION);
+ }
+ if (rc)
+ return -rc;
+
+ /* After the TPM has successfully received the register address
+ * it needs some time, thus we're sleeping here again, before
+ * retrieving the data
+ */
+ for (count = 0; count < MAX_COUNT; count++) {
+ udelay(SLEEP_DURATION);
+ rc = i2c_read(tpm_dev.addr, 0, 0, buffer, len);
+ if (rc == 0)
+ break; /* success, break to skip sleep */
+ }
+ } else {
+ /*
+ * Use a combined read for newer chips.
+ * Unfortunately the smbus functions are not suitable due to
+ * the 32 byte limit of the smbus.
+ * Retries should usually not be needed, but are kept just to
+ * be safe on the safe side.
+ */
+ for (count = 0; count < MAX_COUNT; count++) {
+ rc = i2c_read(tpm_dev.addr, addr, 1, buffer, len);
+ if (rc == 0)
+ break; /* break here to skip sleep */
+ udelay(SLEEP_DURATION);
+ }
+ }
+
+ /* Take care of 'guard time' */
+ udelay(SLEEP_DURATION);
+ if (rc)
+ return -rc;
+
+ return 0;
+}
+
+static int iic_tpm_write_generic(u8 addr, u8 *buffer, size_t len,
+ unsigned int sleep_time, u8 max_count)
+{
+ int rc = 0;
+ int count;
+
+ /* Prepare send buffer */
+ tpm_dev.buf[0] = addr;
+ memcpy(&(tpm_dev.buf[1]), buffer, len);
+
+ for (count = 0; count < max_count; count++) {
+ rc = i2c_write(tpm_dev.addr, 0, 0, tpm_dev.buf, len + 1);
+ if (rc == 0)
+ break; /* Success, break to skip sleep */
+ udelay(sleep_time);
+ }
+
+ /* take care of 'guard time' */
+ udelay(SLEEP_DURATION);
+ if (rc)
+ return -rc;
+
+ return 0;
+}
+
+/*
+ * iic_tpm_write() - write to TPM register
+ * @addr: register address to write to
+ * @buffer: containing data to be written
+ * @len: number of bytes to write
+ *
+ * Write len bytes from provided buffer to TPM register (little
+ * endian format, i.e. buffer[0] is written as first byte).
+ *
+ * NOTE: TPM is big-endian for multi-byte values. Multi-byte
+ * values have to be swapped.
+ *
+ * NOTE: use this function instead of the iic_tpm_write_generic function.
+ *
+ * Return -EIO on error, 0 on success
+ */
+static int iic_tpm_write(u8 addr, u8 *buffer, size_t len)
+{
+ return iic_tpm_write_generic(addr, buffer, len, SLEEP_DURATION,
+ MAX_COUNT);
+}
+
+/*
+ * This function is needed especially for the cleanup situation after
+ * sending TPM_READY
+ */
+static int iic_tpm_write_long(u8 addr, u8 *buffer, size_t len)
+{
+ return iic_tpm_write_generic(addr, buffer, len, SLEEP_DURATION_LONG,
+ MAX_COUNT_LONG);
+}
+
+static int check_locality(struct tpm_chip *chip, int loc)
+{
+ const u8 mask = TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID;
+ u8 buf;
+ int rc;
+
+ rc = iic_tpm_read(TPM_ACCESS(loc), &buf, 1);
+ if (rc < 0)
+ return rc;
+
+ if ((buf & mask) == mask) {
+ chip->vendor.locality = loc;
+ return loc;
+ }
+
+ return -1;
+}
+
+static void release_locality(struct tpm_chip *chip, int loc, int force)
+{
+ const u8 mask = TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID;
+ u8 buf;
+
+ if (iic_tpm_read(TPM_ACCESS(loc), &buf, 1) < 0)
+ return;
+
+ if (force || (buf & mask) == mask) {
+ buf = TPM_ACCESS_ACTIVE_LOCALITY;
+ iic_tpm_write(TPM_ACCESS(loc), &buf, 1);
+ }
+}
+
+static int request_locality(struct tpm_chip *chip, int loc)
+{
+ unsigned long start, stop;
+ u8 buf = TPM_ACCESS_REQUEST_USE;
+
+ if (check_locality(chip, loc) >= 0)
+ return loc; /* We already have the locality */
+
+ iic_tpm_write(TPM_ACCESS(loc), &buf, 1);
+
+ /* Wait for burstcount */
+ start = get_timer(0);
+ stop = chip->vendor.timeout_a;
+ do {
+ if (check_locality(chip, loc) >= 0)
+ return loc;
+ udelay(TPM_TIMEOUT * 1000);
+ } while (get_timer(start) < stop);
+
+ return -1;
+}
+
+static u8 tpm_tis_i2c_status(struct tpm_chip *chip)
+{
+ /* NOTE: Since i2c read may fail, return 0 in this case --> time-out */
+ u8 buf;
+
+ if (iic_tpm_read(TPM_STS(chip->vendor.locality), &buf, 1) < 0)
+ return 0;
+ else
+ return buf;
+}
+
+static void tpm_tis_i2c_ready(struct tpm_chip *chip)
+{
+ /* This causes the current command to be aborted */
+ u8 buf = TPM_STS_COMMAND_READY;
+
+ iic_tpm_write_long(TPM_STS(chip->vendor.locality), &buf, 1);
+}
+
+static ssize_t get_burstcount(struct tpm_chip *chip)
+{
+ unsigned long start, stop;
+ ssize_t burstcnt;
+ u8 addr, buf[3];
+
+ /* Wait for burstcount */
+ /* XXX: Which timeout value? Spec has 2 answers (c & d) */
+ start = get_timer(0);
+ stop = chip->vendor.timeout_d;
+ do {
+ /* Note: STS is little endian */
+ addr = TPM_STS(chip->vendor.locality) + 1;
+ if (iic_tpm_read(addr, buf, 3) < 0)
+ burstcnt = 0;
+ else
+ burstcnt = (buf[2] << 16) + (buf[1] << 8) + buf[0];
+
+ if (burstcnt)
+ return burstcnt;
+ udelay(TPM_TIMEOUT * 1000);
+ } while (get_timer(start) < stop);
+
+ return -EBUSY;
+}
+
+static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout,
+ int *status)
+{
+ unsigned long start, stop;
+
+ /* Check current status */
+ *status = tpm_tis_i2c_status(chip);
+ if ((*status & mask) == mask)
+ return 0;
+
+ start = get_timer(0);
+ stop = timeout;
+ do {
+ udelay(TPM_TIMEOUT * 1000);
+ *status = tpm_tis_i2c_status(chip);
+ if ((*status & mask) == mask)
+ return 0;
+ } while (get_timer(start) < stop);
+
+ return -ETIME;
+}
+
+static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count)
+{
+ size_t size = 0;
+ ssize_t burstcnt;
+ int rc;
+
+ while (size < count) {
+ burstcnt = get_burstcount(chip);
+
+ /* burstcount < 0 -> tpm is busy */
+ if (burstcnt < 0)
+ return burstcnt;
+
+ /* Limit received data to max left */
+ if (burstcnt > (count - size))
+ burstcnt = count - size;
+
+ rc = iic_tpm_read(TPM_DATA_FIFO(chip->vendor.locality),
+ &(buf[size]), burstcnt);
+ if (rc == 0)
+ size += burstcnt;
+ }
+
+ return size;
+}
+
+static int tpm_tis_i2c_recv(struct tpm_chip *chip, u8 *buf, size_t count)
+{
+ int size = 0;
+ int expected, status;
+
+ if (count < TPM_HEADER_SIZE) {
+ size = -EIO;
+ goto out;
+ }
+
+ /* Read first 10 bytes, including tag, paramsize, and result */
+ size = recv_data(chip, buf, TPM_HEADER_SIZE);
+ if (size < TPM_HEADER_SIZE) {
+ error("Unable to read header\n");
+ goto out;
+ }
+
+ expected = get_unaligned_be32(buf + TPM_RSP_SIZE_BYTE);
+ if ((size_t)expected > count) {
+ size = -EIO;
+ goto out;
+ }
+
+ size += recv_data(chip, &buf[TPM_HEADER_SIZE],
+ expected - TPM_HEADER_SIZE);
+ if (size < expected) {
+ error("Unable to read remainder of result\n");
+ size = -ETIME;
+ goto out;
+ }
+
+ wait_for_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c, &status);
+ if (status & TPM_STS_DATA_AVAIL) { /* Retry? */
+ error("Error left over data\n");
+ size = -EIO;
+ goto out;
+ }
+
+out:
+ tpm_tis_i2c_ready(chip);
+ /*
+ * The TPM needs some time to clean up here,
+ * so we sleep rather than keeping the bus busy
+ */
+ udelay(2000);
+ release_locality(chip, chip->vendor.locality, 0);
+
+ return size;
+}
+
+static int tpm_tis_i2c_send(struct tpm_chip *chip, u8 *buf, size_t len)
+{
+ int rc, status;
+ ssize_t burstcnt;
+ size_t count = 0;
+ int retry = 0;
+ u8 sts = TPM_STS_GO;
+
+ if (len > TPM_DEV_BUFSIZE)
+ return -E2BIG; /* Command is too long for our tpm, sorry */
+
+ if (request_locality(chip, 0) < 0)
+ return -EBUSY;
+
+ status = tpm_tis_i2c_status(chip);
+ if ((status & TPM_STS_COMMAND_READY) == 0) {
+ tpm_tis_i2c_ready(chip);
+ if (wait_for_stat(chip, TPM_STS_COMMAND_READY,
+ chip->vendor.timeout_b, &status) < 0) {
+ rc = -ETIME;
+ goto out_err;
+ }
+ }
+
+ burstcnt = get_burstcount(chip);
+
+ /* burstcount < 0 -> tpm is busy */
+ if (burstcnt < 0)
+ return burstcnt;
+
+ while (count < len - 1) {
+ if (burstcnt > len - 1 - count)
+ burstcnt = len - 1 - count;
+
+#ifdef CONFIG_TPM_TIS_I2C_BURST_LIMITATION
+ if (retry && burstcnt > CONFIG_TPM_TIS_I2C_BURST_LIMITATION)
+ burstcnt = CONFIG_TPM_TIS_I2C_BURST_LIMITATION;
+#endif /* CONFIG_TPM_TIS_I2C_BURST_LIMITATION */
+
+ rc = iic_tpm_write(TPM_DATA_FIFO(chip->vendor.locality),
+ &(buf[count]), burstcnt);
+ if (rc == 0)
+ count += burstcnt;
+ else {
+ retry++;
+ wait_for_stat(chip, TPM_STS_VALID,
+ chip->vendor.timeout_c, &status);
+
+ if ((status & TPM_STS_DATA_EXPECT) == 0) {
+ rc = -EIO;
+ goto out_err;
+ }
+ }
+ }
+
+ /* Write last byte */
+ iic_tpm_write(TPM_DATA_FIFO(chip->vendor.locality), &(buf[count]), 1);
+ wait_for_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c, &status);
+ if ((status & TPM_STS_DATA_EXPECT) != 0) {
+ rc = -EIO;
+ goto out_err;
+ }
+
+ /* Go and do it */
+ iic_tpm_write(TPM_STS(chip->vendor.locality), &sts, 1);
+
+ return len;
+
+out_err:
+ tpm_tis_i2c_ready(chip);
+ /*
+ * The TPM needs some time to clean up here,
+ * so we sleep rather than keeping the bus busy
+ */
+ udelay(2000);
+ release_locality(chip, chip->vendor.locality, 0);
+
+ return rc;
+}
+
+static struct tpm_vendor_specific tpm_tis_i2c = {
+ .status = tpm_tis_i2c_status,
+ .recv = tpm_tis_i2c_recv,
+ .send = tpm_tis_i2c_send,
+ .cancel = tpm_tis_i2c_ready,
+ .req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
+ .req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
+ .req_canceled = TPM_STS_COMMAND_READY,
+};
+
+
+static enum i2c_chip_type tpm_vendor_chip_type(void)
+{
+#ifdef CONFIG_OF_CONTROL
+ const void *blob = gd->fdt_blob;
+
+ if (fdtdec_next_compatible(blob, 0, COMPAT_INFINEON_SLB9645_TPM) >= 0)
+ return SLB9645;
+
+ if (fdtdec_next_compatible(blob, 0, COMPAT_INFINEON_SLB9635_TPM) >= 0)
+ return SLB9635;
+#endif
+ return UNKNOWN;
+}
+
+/* Initialisation of i2c tpm */
+int tpm_vendor_init(uint32_t dev_addr)
+{
+ u32 vendor;
+ u32 expected_did_vid;
+ uint old_addr;
+ int rc = 0;
+ struct tpm_chip *chip;
+
+ old_addr = tpm_dev.addr;
+ if (dev_addr != 0)
+ tpm_dev.addr = dev_addr;
+
+ tpm_dev.chip_type = tpm_vendor_chip_type();
+
+ chip = tpm_register_hardware(&tpm_tis_i2c);
+ if (chip < 0) {
+ rc = -ENODEV;
+ goto out_err;
+ }
+
+ /* Disable interrupts (not supported) */
+ chip->vendor.irq = 0;
+
+ /* Default timeouts */
+ chip->vendor.timeout_a = TIS_SHORT_TIMEOUT;
+ chip->vendor.timeout_b = TIS_LONG_TIMEOUT;
+ chip->vendor.timeout_c = TIS_SHORT_TIMEOUT;
+ chip->vendor.timeout_d = TIS_SHORT_TIMEOUT;
+
+ if (request_locality(chip, 0) < 0) {
+ rc = -ENODEV;
+ goto out_err;
+ }
+
+ /* Read four bytes from DID_VID register */
+ if (iic_tpm_read(TPM_DID_VID(0), (uchar *)&vendor, 4) < 0) {
+ rc = -EIO;
+ goto out_release;
+ }
+
+ if (tpm_dev.chip_type == SLB9635) {
+ vendor = be32_to_cpu(vendor);
+ expected_did_vid = TPM_TIS_I2C_DID_VID_9635;
+ } else {
+ /* device id and byte order has changed for newer i2c tpms */
+ expected_did_vid = TPM_TIS_I2C_DID_VID_9645;
+ }
+
+ if (tpm_dev.chip_type != UNKNOWN && vendor != expected_did_vid) {
+ error("Vendor id did not match! ID was %08x\n", vendor);
+ rc = -ENODEV;
+ goto out_release;
+ }
+
+ debug("1.2 TPM (chip type %s device-id 0x%X)\n",
+ chip_name[tpm_dev.chip_type], vendor >> 16);
+
+ /*
+ * A timeout query to TPM can be placed here.
+ * Standard timeout values are used so far
+ */
+
+ return 0;
+
+out_release:
+ release_locality(chip, 0, 1);
+
+out_err:
+ tpm_dev.addr = old_addr;
+ return rc;
+}
+
+void tpm_vendor_cleanup(struct tpm_chip *chip)
+{
+ release_locality(chip, chip->vendor.locality, 1);
+}
diff --git a/drivers/tpm/generic_lpc_tpm.c b/drivers/tpm/tpm_tis_lpc.c
similarity index 100%
rename from drivers/tpm/generic_lpc_tpm.c
rename to drivers/tpm/tpm_tis_lpc.c
diff --git a/drivers/usb/eth/asix.c b/drivers/usb/eth/asix.c
index 75ec8f7..76624b9 100644
--- a/drivers/usb/eth/asix.c
+++ b/drivers/usb/eth/asix.c
@@ -407,6 +407,25 @@
rx_ctl = asix_read_rx_ctl(dev);
debug("RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
+ dev->phy_id = asix_get_phy_addr(dev);
+ if (dev->phy_id < 0)
+ debug("Failed to read phy id\n");
+
+ asix_mdio_write(dev, dev->phy_id, MII_BMCR, BMCR_RESET);
+ asix_mdio_write(dev, dev->phy_id, MII_ADVERTISE,
+ ADVERTISE_ALL | ADVERTISE_CSMA);
+ mii_nway_restart(dev);
+
+ if (asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT) < 0)
+ return -1;
+
+ if (asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
+ AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
+ AX88772_IPG2_DEFAULT, 0, NULL) < 0) {
+ debug("Write IPG,IPG1,IPG2 failed\n");
+ return -1;
+ }
+
return 0;
}
@@ -422,31 +441,6 @@
debug("** %s()\n", __func__);
- dev->phy_id = asix_get_phy_addr(dev);
- if (dev->phy_id < 0)
- debug("Failed to read phy id\n");
-
- if (asix_sw_reset(dev, AX_SWRESET_PRL) < 0)
- goto out_err;
-
- if (asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL) < 0)
- goto out_err;
-
- asix_mdio_write(dev, dev->phy_id, MII_BMCR, BMCR_RESET);
- asix_mdio_write(dev, dev->phy_id, MII_ADVERTISE,
- ADVERTISE_ALL | ADVERTISE_CSMA);
- mii_nway_restart(dev);
-
- if (asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT) < 0)
- goto out_err;
-
- if (asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
- AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
- AX88772_IPG2_DEFAULT, 0, NULL) < 0) {
- debug("Write IPG,IPG1,IPG2 failed\n");
- goto out_err;
- }
-
if (asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL) < 0)
goto out_err;
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index e545b6b..432cf17 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -35,6 +35,7 @@
# new USB gadget layer dependencies
ifdef CONFIG_USB_GADGET
COBJS-$(CONFIG_USB_GADGET_S3C_UDC_OTG) += s3c_udc_otg.o
+COBJS-$(CONFIG_USB_GADGET_FOTG210) += fotg210.o
COBJS-$(CONFIG_USBDOWNLOAD_GADGET) += g_dnl.o
COBJS-$(CONFIG_DFU_FUNCTION) += f_dfu.o
endif
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 2c5600e..f30778a 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1098,4 +1098,5 @@
if (composite != driver)
return;
usb_gadget_unregister_driver(&composite_driver);
+ composite = NULL;
}
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index c28866f..45bc132 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -2261,7 +2261,8 @@
if (rc)
goto reset;
fsg->bulk_out_enabled = 1;
- common->bulk_out_maxpacket = le16_to_cpu(d->wMaxPacketSize);
+ common->bulk_out_maxpacket =
+ le16_to_cpu(get_unaligned(&d->wMaxPacketSize));
clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
/* Allocate the requests */
diff --git a/drivers/usb/gadget/fotg210.c b/drivers/usb/gadget/fotg210.c
new file mode 100644
index 0000000..d003331
--- /dev/null
+++ b/drivers/usb/gadget/fotg210.c
@@ -0,0 +1,948 @@
+/*
+ * Faraday USB 2.0 OTG Controller
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <config.h>
+#include <net.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <linux/types.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include <usb/fotg210.h>
+
+#define CFG_NUM_ENDPOINTS 4
+#define CFG_EP0_MAX_PACKET_SIZE 64
+#define CFG_EPX_MAX_PACKET_SIZE 512
+
+#define CFG_CMD_TIMEOUT (CONFIG_SYS_HZ >> 2) /* 250 ms */
+
+struct fotg210_chip;
+
+struct fotg210_ep {
+ struct usb_ep ep;
+
+ uint maxpacket;
+ uint id;
+ uint stopped;
+
+ struct list_head queue;
+ struct fotg210_chip *chip;
+ const struct usb_endpoint_descriptor *desc;
+};
+
+struct fotg210_request {
+ struct usb_request req;
+ struct list_head queue;
+ struct fotg210_ep *ep;
+};
+
+struct fotg210_chip {
+ struct usb_gadget gadget;
+ struct usb_gadget_driver *driver;
+ struct fotg210_regs *regs;
+ uint8_t irq;
+ uint16_t addr;
+ int pullup;
+ enum usb_device_state state;
+ struct fotg210_ep ep[1 + CFG_NUM_ENDPOINTS];
+};
+
+static struct usb_endpoint_descriptor ep0_desc = {
+ .bLength = sizeof(struct usb_endpoint_descriptor),
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
+};
+
+static inline int fifo_to_ep(struct fotg210_chip *chip, int id, int in)
+{
+ return (id < 0) ? 0 : ((id & 0x03) + 1);
+}
+
+static inline int ep_to_fifo(struct fotg210_chip *chip, int id)
+{
+ return (id <= 0) ? -1 : ((id - 1) & 0x03);
+}
+
+static inline int ep_reset(struct fotg210_chip *chip, uint8_t ep_addr)
+{
+ int ep = ep_addr & USB_ENDPOINT_NUMBER_MASK;
+ struct fotg210_regs *regs = chip->regs;
+
+ if (ep_addr & USB_DIR_IN) {
+ /* reset endpoint */
+ setbits_le32(®s->iep[ep - 1], IEP_RESET);
+ mdelay(1);
+ clrbits_le32(®s->iep[ep - 1], IEP_RESET);
+ /* clear endpoint stall */
+ clrbits_le32(®s->iep[ep - 1], IEP_STALL);
+ } else {
+ /* reset endpoint */
+ setbits_le32(®s->oep[ep - 1], OEP_RESET);
+ mdelay(1);
+ clrbits_le32(®s->oep[ep - 1], OEP_RESET);
+ /* clear endpoint stall */
+ clrbits_le32(®s->oep[ep - 1], OEP_STALL);
+ }
+
+ return 0;
+}
+
+static int fotg210_reset(struct fotg210_chip *chip)
+{
+ struct fotg210_regs *regs = chip->regs;
+ uint32_t i;
+
+ chip->state = USB_STATE_POWERED;
+
+ /* chip enable */
+ writel(DEVCTRL_EN, ®s->dev_ctrl);
+
+ /* device address reset */
+ chip->addr = 0;
+ writel(0, ®s->dev_addr);
+
+ /* set idle counter to 7ms */
+ writel(7, ®s->idle);
+
+ /* disable all interrupts */
+ writel(IMR_MASK, ®s->imr);
+ writel(GIMR_MASK, ®s->gimr);
+ writel(GIMR0_MASK, ®s->gimr0);
+ writel(GIMR1_MASK, ®s->gimr1);
+ writel(GIMR2_MASK, ®s->gimr2);
+
+ /* clear interrupts */
+ writel(ISR_MASK, ®s->isr);
+ writel(0, ®s->gisr);
+ writel(0, ®s->gisr0);
+ writel(0, ®s->gisr1);
+ writel(0, ®s->gisr2);
+
+ /* chip reset */
+ setbits_le32(®s->dev_ctrl, DEVCTRL_RESET);
+ mdelay(10);
+ if (readl(®s->dev_ctrl) & DEVCTRL_RESET) {
+ printf("fotg210: chip reset failed\n");
+ return -1;
+ }
+
+ /* CX FIFO reset */
+ setbits_le32(®s->cxfifo, CXFIFO_CXFIFOCLR);
+ mdelay(10);
+ if (readl(®s->cxfifo) & CXFIFO_CXFIFOCLR) {
+ printf("fotg210: ep0 fifo reset failed\n");
+ return -1;
+ }
+
+ /* create static ep-fifo map (EP1 <-> FIFO0, EP2 <-> FIFO1 ...) */
+ writel(EPMAP14_DEFAULT, ®s->epmap14);
+ writel(EPMAP58_DEFAULT, ®s->epmap58);
+ writel(FIFOMAP_DEFAULT, ®s->fifomap);
+ writel(0, ®s->fifocfg);
+ for (i = 0; i < 8; ++i) {
+ writel(CFG_EPX_MAX_PACKET_SIZE, ®s->iep[i]);
+ writel(CFG_EPX_MAX_PACKET_SIZE, ®s->oep[i]);
+ }
+
+ /* FIFO reset */
+ for (i = 0; i < 4; ++i) {
+ writel(FIFOCSR_RESET, ®s->fifocsr[i]);
+ mdelay(10);
+ if (readl(®s->fifocsr[i]) & FIFOCSR_RESET) {
+ printf("fotg210: fifo%d reset failed\n", i);
+ return -1;
+ }
+ }
+
+ /* enable only device interrupt and triggered at level-high */
+ writel(IMR_IRQLH | IMR_HOST | IMR_OTG, ®s->imr);
+ writel(ISR_MASK, ®s->isr);
+ /* disable EP0 IN/OUT interrupt */
+ writel(GIMR0_CXOUT | GIMR0_CXIN, ®s->gimr0);
+ /* disable EPX IN+SPK+OUT interrupts */
+ writel(GIMR1_MASK, ®s->gimr1);
+ /* disable wakeup+idle+dma+zlp interrupts */
+ writel(GIMR2_WAKEUP | GIMR2_IDLE | GIMR2_DMAERR | GIMR2_DMAFIN
+ | GIMR2_ZLPRX | GIMR2_ZLPTX, ®s->gimr2);
+ /* enable all group interrupt */
+ writel(0, ®s->gimr);
+
+ /* suspend delay = 3 ms */
+ writel(3, ®s->idle);
+
+ /* turn-on device interrupts */
+ setbits_le32(®s->dev_ctrl, DEVCTRL_GIRQ_EN);
+
+ return 0;
+}
+
+static inline int fotg210_cxwait(struct fotg210_chip *chip, uint32_t mask)
+{
+ struct fotg210_regs *regs = chip->regs;
+ int ret = -1;
+ ulong ts;
+
+ for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) {
+ if ((readl(®s->cxfifo) & mask) != mask)
+ continue;
+ ret = 0;
+ break;
+ }
+
+ if (ret)
+ printf("fotg210: cx/ep0 timeout\n");
+
+ return ret;
+}
+
+static int fotg210_dma(struct fotg210_ep *ep, struct fotg210_request *req)
+{
+ struct fotg210_chip *chip = ep->chip;
+ struct fotg210_regs *regs = chip->regs;
+ uint32_t tmp, ts;
+ uint8_t *buf = req->req.buf + req->req.actual;
+ uint32_t len = req->req.length - req->req.actual;
+ int fifo = ep_to_fifo(chip, ep->id);
+ int ret = -EBUSY;
+
+ /* 1. init dma buffer */
+ if (len > ep->maxpacket)
+ len = ep->maxpacket;
+
+ /* 2. wait for dma ready (hardware) */
+ for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) {
+ if (!(readl(®s->dma_ctrl) & DMACTRL_START)) {
+ ret = 0;
+ break;
+ }
+ }
+ if (ret) {
+ printf("fotg210: dma busy\n");
+ req->req.status = ret;
+ return ret;
+ }
+
+ /* 3. DMA target setup */
+ if (ep->desc->bEndpointAddress & USB_DIR_IN)
+ flush_dcache_range((ulong)buf, (ulong)buf + len);
+ else
+ invalidate_dcache_range((ulong)buf, (ulong)buf + len);
+
+ writel(virt_to_phys(buf), ®s->dma_addr);
+
+ if (ep->desc->bEndpointAddress & USB_DIR_IN) {
+ if (ep->id == 0) {
+ /* Wait until cx/ep0 fifo empty */
+ fotg210_cxwait(chip, CXFIFO_CXFIFOE);
+ writel(DMAFIFO_CX, ®s->dma_fifo);
+ } else {
+ /* Wait until epx fifo empty */
+ fotg210_cxwait(chip, CXFIFO_FIFOE(fifo));
+ writel(DMAFIFO_FIFO(fifo), ®s->dma_fifo);
+ }
+ writel(DMACTRL_LEN(len) | DMACTRL_MEM2FIFO, ®s->dma_ctrl);
+ } else {
+ uint32_t blen;
+
+ if (ep->id == 0) {
+ writel(DMAFIFO_CX, ®s->dma_fifo);
+ do {
+ blen = CXFIFO_BYTES(readl(®s->cxfifo));
+ } while (blen < len);
+ } else {
+ writel(DMAFIFO_FIFO(fifo), ®s->dma_fifo);
+ blen = FIFOCSR_BYTES(readl(®s->fifocsr[fifo]));
+ }
+ len = (len < blen) ? len : blen;
+ writel(DMACTRL_LEN(len) | DMACTRL_FIFO2MEM, ®s->dma_ctrl);
+ }
+
+ /* 4. DMA start */
+ setbits_le32(®s->dma_ctrl, DMACTRL_START);
+
+ /* 5. DMA wait */
+ ret = -EBUSY;
+ for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) {
+ tmp = readl(®s->gisr2);
+ /* DMA complete */
+ if (tmp & GISR2_DMAFIN) {
+ ret = 0;
+ break;
+ }
+ /* DMA error */
+ if (tmp & GISR2_DMAERR) {
+ printf("fotg210: dma error\n");
+ break;
+ }
+ /* resume, suspend, reset */
+ if (tmp & (GISR2_RESUME | GISR2_SUSPEND | GISR2_RESET)) {
+ printf("fotg210: dma reset by host\n");
+ break;
+ }
+ }
+
+ /* 7. DMA target reset */
+ if (ret)
+ writel(DMACTRL_ABORT | DMACTRL_CLRFF, ®s->dma_ctrl);
+
+ writel(0, ®s->gisr2);
+ writel(0, ®s->dma_fifo);
+
+ req->req.status = ret;
+ if (!ret)
+ req->req.actual += len;
+ else
+ printf("fotg210: ep%d dma error(code=%d)\n", ep->id, ret);
+
+ return len;
+}
+
+/*
+ * result of setup packet
+ */
+#define CX_IDLE 0
+#define CX_FINISH 1
+#define CX_STALL 2
+
+static void fotg210_setup(struct fotg210_chip *chip)
+{
+ int id, ret = CX_IDLE;
+ uint32_t tmp[2];
+ struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)tmp;
+ struct fotg210_regs *regs = chip->regs;
+
+ /*
+ * If this is the first Cx 8 byte command,
+ * we can now query USB mode (high/full speed; USB 2.0/USB 1.0)
+ */
+ if (chip->state == USB_STATE_POWERED) {
+ chip->state = USB_STATE_DEFAULT;
+ if (readl(®s->otgcsr) & OTGCSR_DEV_B) {
+ /* Mini-B */
+ if (readl(®s->dev_ctrl) & DEVCTRL_HS) {
+ puts("fotg210: HS\n");
+ chip->gadget.speed = USB_SPEED_HIGH;
+ /* SOF mask timer = 1100 ticks */
+ writel(SOFMTR_TMR(1100), ®s->sof_mtr);
+ } else {
+ puts("fotg210: FS\n");
+ chip->gadget.speed = USB_SPEED_FULL;
+ /* SOF mask timer = 10000 ticks */
+ writel(SOFMTR_TMR(10000), ®s->sof_mtr);
+ }
+ } else {
+ printf("fotg210: mini-A?\n");
+ }
+ }
+
+ /* switch data port to ep0 */
+ writel(DMAFIFO_CX, ®s->dma_fifo);
+ /* fetch 8 bytes setup packet */
+ tmp[0] = readl(®s->ep0_data);
+ tmp[1] = readl(®s->ep0_data);
+ /* release data port */
+ writel(0, ®s->dma_fifo);
+
+ if (req->bRequestType & USB_DIR_IN)
+ ep0_desc.bEndpointAddress = USB_DIR_IN;
+ else
+ ep0_desc.bEndpointAddress = USB_DIR_OUT;
+
+ ret = CX_IDLE;
+
+ if ((req->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+ switch (req->bRequest) {
+ case USB_REQ_SET_CONFIGURATION:
+ debug("fotg210: set_cfg(%d)\n", req->wValue & 0x00FF);
+ if (!(req->wValue & 0x00FF)) {
+ chip->state = USB_STATE_ADDRESS;
+ writel(chip->addr, ®s->dev_addr);
+ } else {
+ chip->state = USB_STATE_CONFIGURED;
+ writel(chip->addr | DEVADDR_CONF,
+ ®s->dev_addr);
+ }
+ ret = CX_IDLE;
+ break;
+
+ case USB_REQ_SET_ADDRESS:
+ debug("fotg210: set_addr(0x%04X)\n", req->wValue);
+ chip->state = USB_STATE_ADDRESS;
+ chip->addr = req->wValue & DEVADDR_ADDR_MASK;
+ ret = CX_FINISH;
+ writel(chip->addr, ®s->dev_addr);
+ break;
+
+ case USB_REQ_CLEAR_FEATURE:
+ debug("fotg210: clr_feature(%d, %d)\n",
+ req->bRequestType & 0x03, req->wValue);
+ switch (req->wValue) {
+ case 0: /* [Endpoint] halt */
+ ep_reset(chip, req->wIndex);
+ ret = CX_FINISH;
+ break;
+ case 1: /* [Device] remote wake-up */
+ case 2: /* [Device] test mode */
+ default:
+ ret = CX_STALL;
+ break;
+ }
+ break;
+
+ case USB_REQ_SET_FEATURE:
+ debug("fotg210: set_feature(%d, %d)\n",
+ req->wValue, req->wIndex & 0xf);
+ switch (req->wValue) {
+ case 0: /* Endpoint Halt */
+ id = req->wIndex & 0xf;
+ setbits_le32(®s->iep[id - 1], IEP_STALL);
+ setbits_le32(®s->oep[id - 1], OEP_STALL);
+ ret = CX_FINISH;
+ break;
+ case 1: /* Remote Wakeup */
+ case 2: /* Test Mode */
+ default:
+ ret = CX_STALL;
+ break;
+ }
+ break;
+
+ case USB_REQ_GET_STATUS:
+ debug("fotg210: get_status\n");
+ ret = CX_STALL;
+ break;
+
+ case USB_REQ_SET_DESCRIPTOR:
+ debug("fotg210: set_descriptor\n");
+ ret = CX_STALL;
+ break;
+
+ case USB_REQ_SYNCH_FRAME:
+ debug("fotg210: sync frame\n");
+ ret = CX_STALL;
+ break;
+ }
+ } /* if ((req->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) */
+
+ if (ret == CX_IDLE && chip->driver->setup) {
+ if (chip->driver->setup(&chip->gadget, req) < 0)
+ ret = CX_STALL;
+ else
+ ret = CX_FINISH;
+ }
+
+ switch (ret) {
+ case CX_FINISH:
+ setbits_le32(®s->cxfifo, CXFIFO_CXFIN);
+ break;
+
+ case CX_STALL:
+ setbits_le32(®s->cxfifo, CXFIFO_CXSTALL | CXFIFO_CXFIN);
+ printf("fotg210: cx_stall!\n");
+ break;
+
+ case CX_IDLE:
+ debug("fotg210: cx_idle?\n");
+ default:
+ break;
+ }
+}
+
+/*
+ * fifo - FIFO id
+ * zlp - zero length packet
+ */
+static void fotg210_recv(struct fotg210_chip *chip, int ep_id)
+{
+ struct fotg210_regs *regs = chip->regs;
+ struct fotg210_ep *ep = chip->ep + ep_id;
+ struct fotg210_request *req;
+ int len;
+
+ if (ep->stopped || (ep->desc->bEndpointAddress & USB_DIR_IN)) {
+ printf("fotg210: ep%d recv, invalid!\n", ep->id);
+ return;
+ }
+
+ if (list_empty(&ep->queue)) {
+ printf("fotg210: ep%d recv, drop!\n", ep->id);
+ return;
+ }
+
+ req = list_first_entry(&ep->queue, struct fotg210_request, queue);
+ len = fotg210_dma(ep, req);
+ if (len < ep->ep.maxpacket || req->req.length <= req->req.actual) {
+ list_del_init(&req->queue);
+ if (req->req.complete)
+ req->req.complete(&ep->ep, &req->req);
+ }
+
+ if (ep->id > 0 && list_empty(&ep->queue)) {
+ setbits_le32(®s->gimr1,
+ GIMR1_FIFO_RX(ep_to_fifo(chip, ep->id)));
+ }
+}
+
+/*
+ * USB Gadget Layer
+ */
+static int fotg210_ep_enable(
+ struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
+{
+ struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep);
+ struct fotg210_chip *chip = ep->chip;
+ struct fotg210_regs *regs = chip->regs;
+ int id = ep_to_fifo(chip, ep->id);
+ int in = (desc->bEndpointAddress & USB_DIR_IN) ? 1 : 0;
+
+ if (!_ep || !desc
+ || desc->bDescriptorType != USB_DT_ENDPOINT
+ || le16_to_cpu(desc->wMaxPacketSize) == 0) {
+ printf("fotg210: bad ep or descriptor\n");
+ return -EINVAL;
+ }
+
+ ep->desc = desc;
+ ep->stopped = 0;
+
+ if (in)
+ setbits_le32(®s->fifomap, FIFOMAP(id, FIFOMAP_IN));
+
+ switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ return -EINVAL;
+
+ case USB_ENDPOINT_XFER_ISOC:
+ setbits_le32(®s->fifocfg,
+ FIFOCFG(id, FIFOCFG_EN | FIFOCFG_ISOC));
+ break;
+
+ case USB_ENDPOINT_XFER_BULK:
+ setbits_le32(®s->fifocfg,
+ FIFOCFG(id, FIFOCFG_EN | FIFOCFG_BULK));
+ break;
+
+ case USB_ENDPOINT_XFER_INT:
+ setbits_le32(®s->fifocfg,
+ FIFOCFG(id, FIFOCFG_EN | FIFOCFG_INTR));
+ break;
+ }
+
+ return 0;
+}
+
+static int fotg210_ep_disable(struct usb_ep *_ep)
+{
+ struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep);
+ struct fotg210_chip *chip = ep->chip;
+ struct fotg210_regs *regs = chip->regs;
+ int id = ep_to_fifo(chip, ep->id);
+
+ ep->desc = NULL;
+ ep->stopped = 1;
+
+ clrbits_le32(®s->fifocfg, FIFOCFG(id, FIFOCFG_CFG_MASK));
+ clrbits_le32(®s->fifomap, FIFOMAP(id, FIFOMAP_DIR_MASK));
+
+ return 0;
+}
+
+static struct usb_request *fotg210_ep_alloc_request(
+ struct usb_ep *_ep, gfp_t gfp_flags)
+{
+ struct fotg210_request *req = malloc(sizeof(*req));
+
+ if (req) {
+ memset(req, 0, sizeof(*req));
+ INIT_LIST_HEAD(&req->queue);
+ }
+ return &req->req;
+}
+
+static void fotg210_ep_free_request(
+ struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct fotg210_request *req;
+
+ req = container_of(_req, struct fotg210_request, req);
+ free(req);
+}
+
+static int fotg210_ep_queue(
+ struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
+{
+ struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep);
+ struct fotg210_chip *chip = ep->chip;
+ struct fotg210_regs *regs = chip->regs;
+ struct fotg210_request *req;
+
+ req = container_of(_req, struct fotg210_request, req);
+ if (!_req || !_req->complete || !_req->buf
+ || !list_empty(&req->queue)) {
+ printf("fotg210: invalid request to ep%d\n", ep->id);
+ return -EINVAL;
+ }
+
+ if (!chip || chip->state == USB_STATE_SUSPENDED) {
+ printf("fotg210: request while chip suspended\n");
+ return -EINVAL;
+ }
+
+ req->req.actual = 0;
+ req->req.status = -EINPROGRESS;
+
+ if (req->req.length == 0) {
+ req->req.status = 0;
+ if (req->req.complete)
+ req->req.complete(&ep->ep, &req->req);
+ return 0;
+ }
+
+ if (ep->id == 0) {
+ do {
+ int len = fotg210_dma(ep, req);
+ if (len < ep->ep.maxpacket)
+ break;
+ if (ep->desc->bEndpointAddress & USB_DIR_IN)
+ udelay(100);
+ } while (req->req.length > req->req.actual);
+ } else {
+ if (ep->desc->bEndpointAddress & USB_DIR_IN) {
+ do {
+ int len = fotg210_dma(ep, req);
+ if (len < ep->ep.maxpacket)
+ break;
+ } while (req->req.length > req->req.actual);
+ } else {
+ list_add_tail(&req->queue, &ep->queue);
+ clrbits_le32(®s->gimr1,
+ GIMR1_FIFO_RX(ep_to_fifo(chip, ep->id)));
+ }
+ }
+
+ if (ep->id == 0 || (ep->desc->bEndpointAddress & USB_DIR_IN)) {
+ if (req->req.complete)
+ req->req.complete(&ep->ep, &req->req);
+ }
+
+ return 0;
+}
+
+static int fotg210_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep);
+ struct fotg210_request *req;
+
+ /* make sure it's actually queued on this endpoint */
+ list_for_each_entry(req, &ep->queue, queue) {
+ if (&req->req == _req)
+ break;
+ }
+ if (&req->req != _req)
+ return -EINVAL;
+
+ /* remove the request */
+ list_del_init(&req->queue);
+
+ /* update status & invoke complete callback */
+ if (req->req.status == -EINPROGRESS) {
+ req->req.status = -ECONNRESET;
+ if (req->req.complete)
+ req->req.complete(_ep, &req->req);
+ }
+
+ return 0;
+}
+
+static int fotg210_ep_halt(struct usb_ep *_ep, int halt)
+{
+ struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep);
+ struct fotg210_chip *chip = ep->chip;
+ struct fotg210_regs *regs = chip->regs;
+ int ret = -1;
+
+ debug("fotg210: ep%d halt=%d\n", ep->id, halt);
+
+ /* Endpoint STALL */
+ if (ep->id > 0 && ep->id <= CFG_NUM_ENDPOINTS) {
+ if (halt) {
+ /* wait until all ep fifo empty */
+ fotg210_cxwait(chip, 0xf00);
+ /* stall */
+ if (ep->desc->bEndpointAddress & USB_DIR_IN) {
+ setbits_le32(®s->iep[ep->id - 1],
+ IEP_STALL);
+ } else {
+ setbits_le32(®s->oep[ep->id - 1],
+ OEP_STALL);
+ }
+ } else {
+ if (ep->desc->bEndpointAddress & USB_DIR_IN) {
+ clrbits_le32(®s->iep[ep->id - 1],
+ IEP_STALL);
+ } else {
+ clrbits_le32(®s->oep[ep->id - 1],
+ OEP_STALL);
+ }
+ }
+ ret = 0;
+ }
+
+ return ret;
+}
+
+/*
+ * activate/deactivate link with host.
+ */
+static void pullup(struct fotg210_chip *chip, int is_on)
+{
+ struct fotg210_regs *regs = chip->regs;
+
+ if (is_on) {
+ if (!chip->pullup) {
+ chip->state = USB_STATE_POWERED;
+ chip->pullup = 1;
+ /* enable the chip */
+ setbits_le32(®s->dev_ctrl, DEVCTRL_EN);
+ /* clear unplug bit (BIT0) */
+ clrbits_le32(®s->phy_tmsr, PHYTMSR_UNPLUG);
+ }
+ } else {
+ chip->state = USB_STATE_NOTATTACHED;
+ chip->pullup = 0;
+ chip->addr = 0;
+ writel(chip->addr, ®s->dev_addr);
+ /* set unplug bit (BIT0) */
+ setbits_le32(®s->phy_tmsr, PHYTMSR_UNPLUG);
+ /* disable the chip */
+ clrbits_le32(®s->dev_ctrl, DEVCTRL_EN);
+ }
+}
+
+static int fotg210_pullup(struct usb_gadget *_gadget, int is_on)
+{
+ struct fotg210_chip *chip;
+
+ chip = container_of(_gadget, struct fotg210_chip, gadget);
+
+ debug("fotg210: pullup=%d\n", is_on);
+
+ pullup(chip, is_on);
+
+ return 0;
+}
+
+static int fotg210_get_frame(struct usb_gadget *_gadget)
+{
+ struct fotg210_chip *chip;
+ struct fotg210_regs *regs;
+
+ chip = container_of(_gadget, struct fotg210_chip, gadget);
+ regs = chip->regs;
+
+ return SOFFNR_FNR(readl(®s->sof_fnr));
+}
+
+static struct usb_gadget_ops fotg210_gadget_ops = {
+ .get_frame = fotg210_get_frame,
+ .pullup = fotg210_pullup,
+};
+
+static struct usb_ep_ops fotg210_ep_ops = {
+ .enable = fotg210_ep_enable,
+ .disable = fotg210_ep_disable,
+ .queue = fotg210_ep_queue,
+ .dequeue = fotg210_ep_dequeue,
+ .set_halt = fotg210_ep_halt,
+ .alloc_request = fotg210_ep_alloc_request,
+ .free_request = fotg210_ep_free_request,
+};
+
+static struct fotg210_chip controller = {
+ .regs = (void __iomem *)CONFIG_FOTG210_BASE,
+ .gadget = {
+ .name = "fotg210_udc",
+ .ops = &fotg210_gadget_ops,
+ .ep0 = &controller.ep[0].ep,
+ .speed = USB_SPEED_UNKNOWN,
+ .is_dualspeed = 1,
+ .is_otg = 0,
+ .is_a_peripheral = 0,
+ .b_hnp_enable = 0,
+ .a_hnp_support = 0,
+ .a_alt_hnp_support = 0,
+ },
+ .ep[0] = {
+ .id = 0,
+ .ep = {
+ .name = "ep0",
+ .ops = &fotg210_ep_ops,
+ },
+ .desc = &ep0_desc,
+ .chip = &controller,
+ .maxpacket = CFG_EP0_MAX_PACKET_SIZE,
+ },
+ .ep[1] = {
+ .id = 1,
+ .ep = {
+ .name = "ep1",
+ .ops = &fotg210_ep_ops,
+ },
+ .chip = &controller,
+ .maxpacket = CFG_EPX_MAX_PACKET_SIZE,
+ },
+ .ep[2] = {
+ .id = 2,
+ .ep = {
+ .name = "ep2",
+ .ops = &fotg210_ep_ops,
+ },
+ .chip = &controller,
+ .maxpacket = CFG_EPX_MAX_PACKET_SIZE,
+ },
+ .ep[3] = {
+ .id = 3,
+ .ep = {
+ .name = "ep3",
+ .ops = &fotg210_ep_ops,
+ },
+ .chip = &controller,
+ .maxpacket = CFG_EPX_MAX_PACKET_SIZE,
+ },
+ .ep[4] = {
+ .id = 4,
+ .ep = {
+ .name = "ep4",
+ .ops = &fotg210_ep_ops,
+ },
+ .chip = &controller,
+ .maxpacket = CFG_EPX_MAX_PACKET_SIZE,
+ },
+};
+
+int usb_gadget_handle_interrupts(void)
+{
+ struct fotg210_chip *chip = &controller;
+ struct fotg210_regs *regs = chip->regs;
+ uint32_t id, st, isr, gisr;
+
+ isr = readl(®s->isr) & (~readl(®s->imr));
+ gisr = readl(®s->gisr) & (~readl(®s->gimr));
+ if (!(isr & ISR_DEV) || !gisr)
+ return 0;
+
+ writel(ISR_DEV, ®s->isr);
+
+ /* CX interrupts */
+ if (gisr & GISR_GRP0) {
+ st = readl(®s->gisr0);
+ writel(0, ®s->gisr0);
+
+ if (st & GISR0_CXERR)
+ printf("fotg210: cmd error\n");
+
+ if (st & GISR0_CXABORT)
+ printf("fotg210: cmd abort\n");
+
+ if (st & GISR0_CXSETUP) /* setup */
+ fotg210_setup(chip);
+ else if (st & GISR0_CXEND) /* command finish */
+ setbits_le32(®s->cxfifo, CXFIFO_CXFIN);
+ }
+
+ /* FIFO interrupts */
+ if (gisr & GISR_GRP1) {
+ st = readl(®s->gisr1);
+ for (id = 0; id < 4; ++id) {
+ if (st & GISR1_RX_FIFO(id))
+ fotg210_recv(chip, fifo_to_ep(chip, id, 0));
+ }
+ }
+
+ /* Device Status Interrupts */
+ if (gisr & GISR_GRP2) {
+ st = readl(®s->gisr2);
+ writel(0, ®s->gisr2);
+
+ if (st & GISR2_RESET)
+ printf("fotg210: reset by host\n");
+ else if (st & GISR2_SUSPEND)
+ printf("fotg210: suspend/removed\n");
+ else if (st & GISR2_RESUME)
+ printf("fotg210: resume\n");
+
+ /* Errors */
+ if (st & GISR2_ISOCERR)
+ printf("fotg210: iso error\n");
+ if (st & GISR2_ISOCABT)
+ printf("fotg210: iso abort\n");
+ if (st & GISR2_DMAERR)
+ printf("fotg210: dma error\n");
+ }
+
+ return 0;
+}
+
+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+{
+ int i, ret = 0;
+ struct fotg210_chip *chip = &controller;
+
+ if (!driver || !driver->bind || !driver->setup) {
+ puts("fotg210: bad parameter.\n");
+ return -EINVAL;
+ }
+
+ INIT_LIST_HEAD(&chip->gadget.ep_list);
+ for (i = 0; i < CFG_NUM_ENDPOINTS + 1; ++i) {
+ struct fotg210_ep *ep = chip->ep + i;
+
+ ep->ep.maxpacket = ep->maxpacket;
+ INIT_LIST_HEAD(&ep->queue);
+
+ if (ep->id == 0) {
+ ep->stopped = 0;
+ } else {
+ ep->stopped = 1;
+ list_add_tail(&ep->ep.ep_list, &chip->gadget.ep_list);
+ }
+ }
+
+ if (fotg210_reset(chip)) {
+ puts("fotg210: reset failed.\n");
+ return -EINVAL;
+ }
+
+ ret = driver->bind(&chip->gadget);
+ if (ret) {
+ debug("fotg210: driver->bind() returned %d\n", ret);
+ return ret;
+ }
+ chip->driver = driver;
+
+ return ret;
+}
+
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+ struct fotg210_chip *chip = &controller;
+
+ driver->unbind(&chip->gadget);
+ chip->driver = NULL;
+
+ pullup(chip, 0);
+
+ return 0;
+}
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index e570142..f038747 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -150,6 +150,12 @@
#define gadget_is_mv(g) 0
#endif
+#ifdef CONFIG_USB_GADGET_FOTG210
+#define gadget_is_fotg210(g) (!strcmp("fotg210_udc", (g)->name))
+#else
+#define gadget_is_fotg210(g) 0
+#endif
+
/*
* CONFIG_USB_GADGET_SX2
* CONFIG_USB_GADGET_AU1X00
@@ -215,5 +221,7 @@
return 0x20;
else if (gadget_is_mv(gadget))
return 0x21;
+ else if (gadget_is_fotg210(gadget))
+ return 0x22;
return -ENOENT;
}
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 9ce98f0..085503d 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -314,7 +314,8 @@
if (!_ep || !desc || ep->desc || _ep->name == ep0name
|| desc->bDescriptorType != USB_DT_ENDPOINT
|| ep->bEndpointAddress != desc->bEndpointAddress
- || ep->fifo_size < le16_to_cpu(desc->wMaxPacketSize)) {
+ || ep->fifo_size <
+ le16_to_cpu(get_unaligned(&desc->wMaxPacketSize))) {
printf("%s, bad ep or descriptor\n", __func__);
return -EINVAL;
}
@@ -329,9 +330,9 @@
/* hardware _could_ do smaller, but driver doesn't */
if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
- && le16_to_cpu(desc->wMaxPacketSize)
+ && le16_to_cpu(get_unaligned(&desc->wMaxPacketSize))
!= BULK_FIFO_SIZE)
- || !desc->wMaxPacketSize) {
+ || !get_unaligned(&desc->wMaxPacketSize)) {
printf("%s, bad %s maxpacket\n", __func__, _ep->name);
return -ERANGE;
}
@@ -345,7 +346,7 @@
ep->desc = desc;
ep->stopped = 0;
ep->pio_irqs = 0;
- ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+ ep->ep.maxpacket = le16_to_cpu(get_unaligned(&desc->wMaxPacketSize));
/* flush fifo (mostly for OUT buffers) */
pxa25x_ep_fifo_flush(_ep);
@@ -485,7 +486,7 @@
{
unsigned max;
- max = le16_to_cpu(ep->desc->wMaxPacketSize);
+ max = le16_to_cpu(get_unaligned(&ep->desc->wMaxPacketSize));
do {
unsigned count;
int is_last, is_short;
@@ -766,7 +767,7 @@
*/
if (unlikely(ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
&& req->req.length >
- le16_to_cpu(ep->desc->wMaxPacketSize)))
+ le16_to_cpu(get_unaligned(&ep->desc->wMaxPacketSize))))
return -EMSGSIZE;
debug_cond(NOISY, "%s queue req %p, len %d buf %p\n",
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 4c00081..71cc0f2 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -610,7 +610,9 @@
#ifdef CONFIG_USB_DEV_PULLUP_GPIO
/* Turn on the USB connection by enabling the pullup resistor */
- set_GPIO_mode(CONFIG_USB_DEV_PULLUP_GPIO | GPIO_OUT);
+ writel(readl(GPDR(CONFIG_USB_DEV_PULLUP_GPIO))
+ | GPIO_bit(CONFIG_USB_DEV_PULLUP_GPIO),
+ GPDR(CONFIG_USB_DEV_PULLUP_GPIO));
writel(GPIO_bit(CONFIG_USB_DEV_PULLUP_GPIO), GPSR(CONFIG_USB_DEV_PULLUP_GPIO));
#else
/* Host port 2 transceiver D+ pull up enable */
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 87a5970..98f2a10 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -43,6 +43,7 @@
else
COBJS-$(CONFIG_USB_EHCI_FSL) += ehci-fsl.o
endif
+COBJS-$(CONFIG_USB_EHCI_FARADAY) += ehci-faraday.o
COBJS-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o
COBJS-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o
COBJS-$(CONFIG_USB_EHCI_MXS) += ehci-mxs.o
diff --git a/drivers/usb/host/ehci-faraday.c b/drivers/usb/host/ehci-faraday.c
new file mode 100644
index 0000000..86add36
--- /dev/null
+++ b/drivers/usb/host/ehci-faraday.c
@@ -0,0 +1,148 @@
+/*
+ * Faraday USB 2.0 EHCI Controller
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <usb.h>
+#include <usb/fusbh200.h>
+#include <usb/fotg210.h>
+
+#include "ehci.h"
+
+#ifndef CONFIG_USB_EHCI_BASE_LIST
+#define CONFIG_USB_EHCI_BASE_LIST { CONFIG_USB_EHCI_BASE }
+#endif
+
+union ehci_faraday_regs {
+ struct fusbh200_regs usb;
+ struct fotg210_regs otg;
+};
+
+static inline int ehci_is_fotg2xx(union ehci_faraday_regs *regs)
+{
+ return !readl(®s->usb.easstr);
+}
+
+/*
+ * Create the appropriate control structures to manage
+ * a new EHCI host controller.
+ */
+int ehci_hcd_init(int index, struct ehci_hccr **ret_hccr,
+ struct ehci_hcor **ret_hcor)
+{
+ struct ehci_hccr *hccr;
+ struct ehci_hcor *hcor;
+ union ehci_faraday_regs *regs;
+ uint32_t base_list[] = CONFIG_USB_EHCI_BASE_LIST;
+
+ if (index < 0 || index >= ARRAY_SIZE(base_list))
+ return -1;
+ regs = (void __iomem *)base_list[index];
+ hccr = (struct ehci_hccr *)®s->usb.hccr;
+ hcor = (struct ehci_hcor *)®s->usb.hcor;
+
+ if (ehci_is_fotg2xx(regs)) {
+ /* A-device bus reset */
+ /* ... Power off A-device */
+ setbits_le32(®s->otg.otgcsr, OTGCSR_A_BUSDROP);
+ /* ... Drop vbus and bus traffic */
+ clrbits_le32(®s->otg.otgcsr, OTGCSR_A_BUSREQ);
+ mdelay(1);
+ /* ... Power on A-device */
+ clrbits_le32(®s->otg.otgcsr, OTGCSR_A_BUSDROP);
+ /* ... Drive vbus and bus traffic */
+ setbits_le32(®s->otg.otgcsr, OTGCSR_A_BUSREQ);
+ mdelay(1);
+ /* Disable OTG & DEV interrupts, triggered at level-high */
+ writel(IMR_IRQLH | IMR_OTG | IMR_DEV, ®s->otg.imr);
+ /* Clear all interrupt status */
+ writel(ISR_HOST | ISR_OTG | ISR_DEV, ®s->otg.isr);
+ } else {
+ /* Interrupt=level-high */
+ setbits_le32(®s->usb.bmcsr, BMCSR_IRQLH);
+ /* VBUS on */
+ clrbits_le32(®s->usb.bmcsr, BMCSR_VBUS_OFF);
+ /* Disable all interrupts */
+ writel(0x00, ®s->usb.bmier);
+ writel(0x1f, ®s->usb.bmisr);
+ }
+
+ *ret_hccr = hccr;
+ *ret_hcor = hcor;
+
+ return 0;
+}
+
+/*
+ * Destroy the appropriate control structures corresponding
+ * the the EHCI host controller.
+ */
+int ehci_hcd_stop(int index)
+{
+ return 0;
+}
+
+/*
+ * This ehci_set_usbmode() overrides the weak function
+ * in "ehci-hcd.c".
+ */
+void ehci_set_usbmode(int index)
+{
+ /* nothing needs to be done */
+}
+
+/*
+ * This ehci_get_port_speed() overrides the weak function
+ * in "ehci-hcd.c".
+ */
+int ehci_get_port_speed(struct ehci_hcor *hcor, uint32_t reg)
+{
+ int spd, ret = PORTSC_PSPD_HS;
+ union ehci_faraday_regs *regs = (void __iomem *)((ulong)hcor - 0x10);
+
+ if (ehci_is_fotg2xx(regs))
+ spd = OTGCSR_SPD(readl(®s->otg.otgcsr));
+ else
+ spd = BMCSR_SPD(readl(®s->usb.bmcsr));
+
+ switch (spd) {
+ case 0: /* full speed */
+ ret = PORTSC_PSPD_FS;
+ break;
+ case 1: /* low speed */
+ ret = PORTSC_PSPD_LS;
+ break;
+ case 2: /* high speed */
+ ret = PORTSC_PSPD_HS;
+ break;
+ default:
+ printf("ehci-faraday: invalid device speed\n");
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * This ehci_get_portsc_register() overrides the weak function
+ * in "ehci-hcd.c".
+ */
+uint32_t *ehci_get_portsc_register(struct ehci_hcor *hcor, int port)
+{
+ /* Faraday EHCI has one and only one portsc register */
+ if (port) {
+ /* Printing the message would cause a scan failure! */
+ debug("The request port(%d) is not configured\n", port);
+ return NULL;
+ }
+
+ /* Faraday EHCI PORTSC register offset is 0x20 from hcor */
+ return (uint32_t *)((uint8_t *)hcor + 0x20);
+}
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index e0f3e4b..706cf0c 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -589,10 +589,12 @@
dev->act_len = length - QT_TOKEN_GET_TOTALBYTES(token);
} else {
dev->act_len = 0;
+#ifndef CONFIG_USB_EHCI_FARADAY
debug("dev=%u, usbsts=%#x, p[1]=%#x, p[2]=%#x\n",
dev->devnum, ehci_readl(&ctrl->hcor->or_usbsts),
ehci_readl(&ctrl->hcor->or_portsc[0]),
ehci_readl(&ctrl->hcor->or_portsc[1]));
+#endif
}
free(qtd);
@@ -603,6 +605,17 @@
return -1;
}
+__weak uint32_t *ehci_get_portsc_register(struct ehci_hcor *hcor, int port)
+{
+ if (port < 0 || port >= CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) {
+ /* Printing the message would cause a scan failure! */
+ debug("The request port(%u) is not configured\n", port);
+ return NULL;
+ }
+
+ return (uint32_t *)&hcor->or_portsc[port];
+}
+
int
ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
int length, struct devrequest *req)
@@ -616,11 +629,6 @@
int port = le16_to_cpu(req->index) & 0xff;
struct ehci_ctrl *ctrl = dev->controller;
- if (port > CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) {
- printf("The request port(%d) is not configured\n", port - 1);
- return -1;
- }
- status_reg = (uint32_t *)&ctrl->hcor->or_portsc[port - 1];
srclen = 0;
debug("req=%u (%#x), type=%u (%#x), value=%u, index=%u\n",
@@ -631,6 +639,19 @@
typeReq = req->request | req->requesttype << 8;
switch (typeReq) {
+ case USB_REQ_GET_STATUS | ((USB_RT_PORT | USB_DIR_IN) << 8):
+ case USB_REQ_SET_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
+ case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
+ status_reg = ehci_get_portsc_register(ctrl->hcor, port - 1);
+ if (!status_reg)
+ return -1;
+ break;
+ default:
+ status_reg = NULL;
+ break;
+ }
+
+ switch (typeReq) {
case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
switch (le16_to_cpu(req->value) >> 8) {
case USB_DT_DEVICE:
@@ -809,21 +830,23 @@
break;
case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
reg = ehci_readl(status_reg);
+ reg &= ~EHCI_PS_CLEAR;
switch (le16_to_cpu(req->value)) {
case USB_PORT_FEAT_ENABLE:
reg &= ~EHCI_PS_PE;
break;
case USB_PORT_FEAT_C_ENABLE:
- reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_PE;
+ reg |= EHCI_PS_PE;
break;
case USB_PORT_FEAT_POWER:
if (HCS_PPC(ehci_readl(&ctrl->hccr->cr_hcsparams)))
- reg = reg & ~(EHCI_PS_CLEAR | EHCI_PS_PP);
+ reg &= ~EHCI_PS_PP;
+ break;
case USB_PORT_FEAT_C_CONNECTION:
- reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_CSC;
+ reg |= EHCI_PS_CSC;
break;
case USB_PORT_FEAT_OVER_CURRENT:
- reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_OCC;
+ reg |= EHCI_PS_OCC;
break;
case USB_PORT_FEAT_C_RESET:
ctrl->portreset &= ~(1 << port);
@@ -903,6 +926,9 @@
qh_list->qh_overlay.qt_token =
cpu_to_hc32(QT_TOKEN_STATUS(QT_TOKEN_STATUS_HALTED));
+ flush_dcache_range((uint32_t)qh_list,
+ ALIGN_END_ADDR(struct QH, qh_list, 1));
+
/* Set async. queue head pointer. */
ehci_writel(&ehcic[index].hcor->or_asynclistaddr, (uint32_t)qh_list);
@@ -916,6 +942,9 @@
periodic->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
periodic->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
+ flush_dcache_range((uint32_t)periodic,
+ ALIGN_END_ADDR(struct QH, periodic, 1));
+
/*
* Step 2: Setup frame-list: Every microframe, USB tries the same list.
* In particular, device specifications on polling frequency
@@ -933,6 +962,10 @@
| QH_LINK_TYPE_QH;
}
+ flush_dcache_range((uint32_t)ehcic[index].periodic_list,
+ ALIGN_END_ADDR(uint32_t, ehcic[index].periodic_list,
+ 1024));
+
/* Set periodic list base address */
ehci_writel(&ehcic[index].hcor->or_periodiclistbase,
(uint32_t)ehcic[index].periodic_list);
@@ -959,10 +992,13 @@
cmd |= CMD_RUN;
ehci_writel(&ehcic[index].hcor->or_usbcmd, cmd);
+#ifndef CONFIG_USB_EHCI_FARADAY
/* take control over the ports */
cmd = ehci_readl(&ehcic[index].hcor->or_configflag);
cmd |= FLAG_CF;
ehci_writel(&ehcic[index].hcor->or_configflag, cmd);
+#endif
+
/* unblock posted write */
cmd = ehci_readl(&ehcic[index].hcor->or_usbcmd);
mdelay(5);
@@ -1144,6 +1180,16 @@
*buf = buffer + i * elementsize;
}
+ flush_dcache_range((uint32_t)buffer,
+ ALIGN_END_ADDR(char, buffer,
+ queuesize * elementsize));
+ flush_dcache_range((uint32_t)result->first,
+ ALIGN_END_ADDR(struct QH, result->first,
+ queuesize));
+ flush_dcache_range((uint32_t)result->tds,
+ ALIGN_END_ADDR(struct qTD, result->tds,
+ queuesize));
+
if (disable_periodic(ctrl) < 0) {
debug("FATAL: periodic should never fail, but did");
goto fail3;
@@ -1154,6 +1200,11 @@
result->last->qh_link = list->qh_link;
list->qh_link = (uint32_t)result->first | QH_LINK_TYPE_QH;
+ flush_dcache_range((uint32_t)result->last,
+ ALIGN_END_ADDR(struct QH, result->last, 1));
+ flush_dcache_range((uint32_t)list,
+ ALIGN_END_ADDR(struct QH, list, 1));
+
if (enable_periodic(ctrl) < 0) {
debug("FATAL: periodic should never fail, but did");
goto fail3;
@@ -1184,6 +1235,8 @@
return NULL;
}
/* still active */
+ invalidate_dcache_range((uint32_t)cur,
+ ALIGN_END_ADDR(struct QH, cur, 1));
if (cur->qh_overlay.qt_token & 0x80) {
debug("Exit poll_int_queue with no completed intr transfer. "
"token is %x\n", cur->qh_overlay.qt_token);
@@ -1290,6 +1343,9 @@
return -EINVAL;
}
+ invalidate_dcache_range((uint32_t)buffer,
+ ALIGN_END_ADDR(char, buffer, length));
+
ret = destroy_int_queue(dev, queue);
if (ret < 0)
return ret;
diff --git a/drivers/usb/host/ehci-mx5.c b/drivers/usb/host/ehci-mx5.c
index adbed5c..f43c38d 100644
--- a/drivers/usb/host/ehci-mx5.c
+++ b/drivers/usb/host/ehci-mx5.c
@@ -21,8 +21,6 @@
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
-#include <asm/arch/mx5x_pins.h>
-#include <asm/arch/iomux.h>
#include "ehci.h"
@@ -87,77 +85,6 @@
/* USB_CTRL_1 */
#define MXC_USB_CTRL_UH1_EXT_CLK_EN (1 << 25)
-/* USB pin configuration */
-#define USB_PAD_CONFIG (PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST | \
- PAD_CTL_DRV_HIGH | PAD_CTL_100K_PU | \
- PAD_CTL_HYS_ENABLE | PAD_CTL_PUE_PULL)
-
-#ifdef CONFIG_MX51
-/*
- * Configure the MX51 USB H1 IOMUX
- */
-void setup_iomux_usb_h1(void)
-{
- mxc_request_iomux(MX51_PIN_USBH1_STP, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_USBH1_STP, USB_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_USBH1_CLK, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_USBH1_CLK, USB_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_USBH1_DIR, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_USBH1_DIR, USB_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_USBH1_NXT, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_USBH1_NXT, USB_PAD_CONFIG);
-
- mxc_request_iomux(MX51_PIN_USBH1_DATA0, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_USBH1_DATA0, USB_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_USBH1_DATA1, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_USBH1_DATA1, USB_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_USBH1_DATA2, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_USBH1_DATA2, USB_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_USBH1_DATA3, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_USBH1_DATA3, USB_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_USBH1_DATA4, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_USBH1_DATA4, USB_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_USBH1_DATA5, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_USBH1_DATA5, USB_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_USBH1_DATA6, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_USBH1_DATA6, USB_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_USBH1_DATA7, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_USBH1_DATA7, USB_PAD_CONFIG);
-}
-
-/*
- * Configure the MX51 USB H2 IOMUX
- */
-void setup_iomux_usb_h2(void)
-{
- mxc_request_iomux(MX51_PIN_EIM_A24, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX51_PIN_EIM_A24, USB_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_EIM_A25, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX51_PIN_EIM_A25, USB_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_EIM_A26, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX51_PIN_EIM_A26, USB_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_EIM_A27, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX51_PIN_EIM_A27, USB_PAD_CONFIG);
-
- mxc_request_iomux(MX51_PIN_EIM_D16, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX51_PIN_EIM_D16, USB_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_EIM_D17, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX51_PIN_EIM_D17, USB_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_EIM_D18, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX51_PIN_EIM_D18, USB_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_EIM_D19, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX51_PIN_EIM_D19, USB_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_EIM_D20, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX51_PIN_EIM_D20, USB_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_EIM_D21, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX51_PIN_EIM_D21, USB_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_EIM_D22, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX51_PIN_EIM_D22, USB_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_EIM_D23, IOMUX_CONFIG_ALT2);
- mxc_iomux_set_pad(MX51_PIN_EIM_D23, USB_PAD_CONFIG);
-}
-#endif
-
int mxc_set_usbcontrol(int port, unsigned int flags)
{
unsigned int v;
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index aa5cf57..2060a3e 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -42,7 +42,7 @@
while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB)
;
#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \
- defined(CONFIG_AT91SAM9X5)
+ defined(CONFIG_AT91SAM9X5) || defined(CONFIG_SAMA5D3)
/* Enable UPLL */
writel(readl(&pmc->uckr) | AT91_PMC_UPLLEN | AT91_PMC_BIASEN,
&pmc->uckr);
@@ -54,7 +54,12 @@
#endif
/* Enable USB host clock. */
+#ifdef CONFIG_SAMA5D3
+ writel(1 << (ATMEL_ID_UHP - 32), &pmc->pcer1);
+#else
writel(1 << ATMEL_ID_UHP, &pmc->pcer);
+#endif
+
#if defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10)
writel(ATMEL_PMC_UHP | AT91_PMC_HCK0, &pmc->scer);
#else
@@ -69,7 +74,12 @@
at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
/* Disable USB host clock. */
+#ifdef CONFIG_SAMA5D3
+ writel(1 << (ATMEL_ID_UHP - 32), &pmc->pcdr1);
+#else
writel(1 << ATMEL_ID_UHP, &pmc->pcdr);
+#endif
+
#if defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10)
writel(ATMEL_PMC_UHP | AT91_PMC_HCK0, &pmc->scdr);
#else
@@ -83,7 +93,7 @@
while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != 0)
;
#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \
- defined(CONFIG_AT91SAM9X5)
+ defined(CONFIG_AT91SAM9X5) || defined(CONFIG_SAMA5D3)
/* Disable UPLL */
writel(readl(&pmc->uckr) & (~AT91_PMC_UPLLEN), &pmc->uckr);
while ((readl(&pmc->sr) & AT91_PMC_LOCKU) == AT91_PMC_LOCKU)
diff --git a/drivers/usb/musb/omap3.c b/drivers/usb/musb/omap3.c
index c7876ed..a395ebc 100644
--- a/drivers/usb/musb/omap3.c
+++ b/drivers/usb/musb/omap3.c
@@ -30,6 +30,7 @@
* MA 02111-1307 USA
*/
+#include <asm/omap_common.h>
#include <twl4030.h>
#include <twl6030.h>
#include "omap3.h"
@@ -135,7 +136,8 @@
#endif
#ifdef CONFIG_OMAP4430
- u32 *usbotghs_control = (u32 *)(CTRL_BASE + 0x33C);
+ u32 *usbotghs_control =
+ (u32 *)((*ctrl)->control_usbotghs_ctrl);
*usbotghs_control = 0x15;
#endif
platform_needs_initialization = 0;
diff --git a/drivers/usb/phy/twl4030.c b/drivers/usb/phy/twl4030.c
index 54d2e61..74f1dcc 100644
--- a/drivers/usb/phy/twl4030.c
+++ b/drivers/usb/phy/twl4030.c
@@ -54,7 +54,7 @@
{
int ret;
- ret = twl4030_i2c_write_u8(TWL4030_CHIP_USB, data, address);
+ ret = twl4030_i2c_write_u8(TWL4030_CHIP_USB, address, data);
if (ret != 0)
printf("TWL4030:USB:Write[0x%x] Error %d\n", address, ret);
@@ -66,7 +66,7 @@
u8 data;
int ret;
- ret = twl4030_i2c_read_u8(TWL4030_CHIP_USB, &data, address);
+ ret = twl4030_i2c_read_u8(TWL4030_CHIP_USB, address, &data);
if (ret == 0)
ret = data;
else
@@ -78,40 +78,40 @@
static void twl4030_usb_ldo_init(void)
{
/* Enable writing to power configuration registers */
- twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 0xC0,
- TWL4030_PM_MASTER_PROTECT_KEY);
- twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 0x0C,
- TWL4030_PM_MASTER_PROTECT_KEY);
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
+ TWL4030_PM_MASTER_PROTECT_KEY, 0xC0);
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
+ TWL4030_PM_MASTER_PROTECT_KEY, 0x0C);
/* put VUSB3V1 LDO in active state */
- twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x00,
- TWL4030_PM_RECEIVER_VUSB_DEDICATED2);
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER,
+ TWL4030_PM_RECEIVER_VUSB_DEDICATED2, 0x00);
/* input to VUSB3V1 LDO is from VBAT, not VBUS */
- twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x14,
- TWL4030_PM_RECEIVER_VUSB_DEDICATED1);
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER,
+ TWL4030_PM_RECEIVER_VUSB_DEDICATED1, 0x14);
/* turn on 3.1V regulator */
- twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x20,
- TWL4030_PM_RECEIVER_VUSB3V1_DEV_GRP);
- twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x00,
- TWL4030_PM_RECEIVER_VUSB3V1_TYPE);
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER,
+ TWL4030_PM_RECEIVER_VUSB3V1_DEV_GRP, 0x20);
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER,
+ TWL4030_PM_RECEIVER_VUSB3V1_TYPE, 0x00);
/* turn on 1.5V regulator */
- twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x20,
- TWL4030_PM_RECEIVER_VUSB1V5_DEV_GRP);
- twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x00,
- TWL4030_PM_RECEIVER_VUSB1V5_TYPE);
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER,
+ TWL4030_PM_RECEIVER_VUSB1V5_DEV_GRP, 0x20);
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER,
+ TWL4030_PM_RECEIVER_VUSB1V5_TYPE, 0x00);
/* turn on 1.8V regulator */
- twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x20,
- TWL4030_PM_RECEIVER_VUSB1V8_DEV_GRP);
- twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x00,
- TWL4030_PM_RECEIVER_VUSB1V8_TYPE);
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER,
+ TWL4030_PM_RECEIVER_VUSB1V8_DEV_GRP, 0x20);
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER,
+ TWL4030_PM_RECEIVER_VUSB1V8_TYPE, 0x00);
/* disable access to power configuration registers */
- twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 0x00,
- TWL4030_PM_MASTER_PROTECT_KEY);
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
+ TWL4030_PM_MASTER_PROTECT_KEY, 0x00);
}
static void twl4030_phy_power(void)
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 53952ab..68ff34b 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -49,6 +49,7 @@
COBJS-$(CONFIG_VIDEO_MB86R0xGDC) += mb86r0xgdc.o videomodes.o
COBJS-$(CONFIG_VIDEO_MX3) += mx3fb.o videomodes.o
COBJS-$(CONFIG_VIDEO_IPUV3) += mxc_ipuv3_fb.o ipu_common.o ipu_disp.o
+COBJS-$(CONFIG_VIDEO_MXS) += mxsfb.o videomodes.o
COBJS-$(CONFIG_VIDEO_OMAP3) += omap3_dss.o
COBJS-$(CONFIG_VIDEO_SED13806) += sed13806.o
COBJS-$(CONFIG_VIDEO_SM501) += sm501.o
diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c
index 61e1058..b10f159 100644
--- a/drivers/video/cfb_console.c
+++ b/drivers/video/cfb_console.c
@@ -151,6 +151,10 @@
#endif
#endif
+#ifdef CONFIG_VIDEO_MXS
+#define VIDEO_FB_16BPP_WORD_SWAP
+#endif
+
/*
* Defines for the MB862xx driver
*/
@@ -568,8 +572,6 @@
SWAP32((video_font_draw_table32
[bits & 15][3] & eorx) ^ bgx);
}
- if (cfb_do_flush_cache)
- flush_cache((ulong)dest0, 32);
dest0 += VIDEO_FONT_WIDTH * VIDEO_PIXEL_SIZE;
s++;
}
@@ -638,8 +640,6 @@
for (x = firstx; x < lastx; x++) {
u8 *dest = (u8 *)(video_fb_address) + x + y;
*dest = ~*dest;
- if (cfb_do_flush_cache)
- flush_cache((ulong)dest, 4);
}
}
}
@@ -683,6 +683,8 @@
}
cursor_state = state;
}
+ if (cfb_do_flush_cache)
+ flush_cache(VIDEO_FB_ADRS, VIDEO_SIZE);
}
#endif
@@ -735,8 +737,6 @@
memsetl(offset + i * VIDEO_LINE_LEN, size, bgx);
}
#endif
- if (cfb_do_flush_cache)
- flush_cache((ulong)CONSOLE_ROW_FIRST, CONSOLE_SIZE);
}
static void console_scrollup(void)
@@ -1142,6 +1142,8 @@
#else
parse_putc(c);
#endif
+ if (cfb_do_flush_cache)
+ flush_cache(VIDEO_FB_ADRS, VIDEO_SIZE);
}
void video_puts(const char *s)
@@ -1795,6 +1797,8 @@
}
#endif
+ if (cfb_do_flush_cache)
+ flush_cache(VIDEO_FB_ADRS, VIDEO_SIZE);
return (0);
}
#endif
@@ -2205,6 +2209,9 @@
console_col = 0;
console_row = 0;
+ if (cfb_do_flush_cache)
+ flush_cache(VIDEO_FB_ADRS, VIDEO_SIZE);
+
return 0;
}
diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c
new file mode 100644
index 0000000..b189419
--- /dev/null
+++ b/drivers/video/mxsfb.c
@@ -0,0 +1,194 @@
+/*
+ * Freescale i.MX23/i.MX28 LCDIF driver
+ *
+ * Copyright (C) 2011-2013 Marek Vasut <marex@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <malloc.h>
+#include <video_fb.h>
+
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+
+#include "videomodes.h"
+
+#define PS2KHZ(ps) (1000000000UL / (ps))
+
+static GraphicDevice panel;
+
+/*
+ * DENX M28EVK:
+ * setenv videomode
+ * video=ctfb:x:800,y:480,depth:18,mode:0,pclk:30066,
+ * le:0,ri:256,up:0,lo:45,hs:1,vs:1,sync:100663296,vmode:0
+ *
+ * Freescale mx23evk/mx28evk with a Seiko 4.3'' WVGA panel:
+ * setenv videomode
+ * video=ctfb:x:800,y:480,depth:24,mode:0,pclk:29851,
+ * le:89,ri:164,up:23,lo:10,hs:10,vs:10,sync:0,vmode:0
+ */
+
+static void mxs_lcd_init(GraphicDevice *panel,
+ struct ctfb_res_modes *mode, int bpp)
+{
+ struct mxs_lcdif_regs *regs = (struct mxs_lcdif_regs *)MXS_LCDIF_BASE;
+ uint32_t word_len = 0, bus_width = 0;
+ uint8_t valid_data = 0;
+
+ /* Kick in the LCDIF clock */
+ mxs_set_lcdclk(PS2KHZ(mode->pixclock));
+
+ /* Restart the LCDIF block */
+ mxs_reset_block(®s->hw_lcdif_ctrl_reg);
+
+ switch (bpp) {
+ case 24:
+ word_len = LCDIF_CTRL_WORD_LENGTH_24BIT;
+ bus_width = LCDIF_CTRL_LCD_DATABUS_WIDTH_24BIT;
+ valid_data = 0x7;
+ break;
+ case 18:
+ word_len = LCDIF_CTRL_WORD_LENGTH_24BIT;
+ bus_width = LCDIF_CTRL_LCD_DATABUS_WIDTH_18BIT;
+ valid_data = 0x7;
+ break;
+ case 16:
+ word_len = LCDIF_CTRL_WORD_LENGTH_16BIT;
+ bus_width = LCDIF_CTRL_LCD_DATABUS_WIDTH_16BIT;
+ valid_data = 0xf;
+ break;
+ case 8:
+ word_len = LCDIF_CTRL_WORD_LENGTH_8BIT;
+ bus_width = LCDIF_CTRL_LCD_DATABUS_WIDTH_8BIT;
+ valid_data = 0xf;
+ break;
+ }
+
+ writel(bus_width | word_len | LCDIF_CTRL_DOTCLK_MODE |
+ LCDIF_CTRL_BYPASS_COUNT | LCDIF_CTRL_LCDIF_MASTER,
+ ®s->hw_lcdif_ctrl);
+
+ writel(valid_data << LCDIF_CTRL1_BYTE_PACKING_FORMAT_OFFSET,
+ ®s->hw_lcdif_ctrl1);
+ writel((mode->yres << LCDIF_TRANSFER_COUNT_V_COUNT_OFFSET) | mode->xres,
+ ®s->hw_lcdif_transfer_count);
+
+ writel(LCDIF_VDCTRL0_ENABLE_PRESENT | LCDIF_VDCTRL0_ENABLE_POL |
+ LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT |
+ LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT |
+ mode->vsync_len, ®s->hw_lcdif_vdctrl0);
+ writel(mode->upper_margin + mode->lower_margin +
+ mode->vsync_len + mode->yres,
+ ®s->hw_lcdif_vdctrl1);
+ writel((mode->hsync_len << LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_OFFSET) |
+ (mode->left_margin + mode->right_margin +
+ mode->hsync_len + mode->xres),
+ ®s->hw_lcdif_vdctrl2);
+ writel(((mode->left_margin + mode->hsync_len) <<
+ LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT_OFFSET) |
+ (mode->upper_margin + mode->vsync_len),
+ ®s->hw_lcdif_vdctrl3);
+ writel((0 << LCDIF_VDCTRL4_DOTCLK_DLY_SEL_OFFSET) | mode->xres,
+ ®s->hw_lcdif_vdctrl4);
+
+ writel(panel->frameAdrs, ®s->hw_lcdif_cur_buf);
+ writel(panel->frameAdrs, ®s->hw_lcdif_next_buf);
+
+ /* Flush FIFO first */
+ writel(LCDIF_CTRL1_FIFO_CLEAR, ®s->hw_lcdif_ctrl1_set);
+
+ /* Sync signals ON */
+ setbits_le32(®s->hw_lcdif_vdctrl4, LCDIF_VDCTRL4_SYNC_SIGNALS_ON);
+
+ /* FIFO cleared */
+ writel(LCDIF_CTRL1_FIFO_CLEAR, ®s->hw_lcdif_ctrl1_clr);
+
+ /* RUN! */
+ writel(LCDIF_CTRL_RUN, ®s->hw_lcdif_ctrl_set);
+}
+
+void *video_hw_init(void)
+{
+ int bpp = -1;
+ char *penv;
+ void *fb;
+ struct ctfb_res_modes mode;
+
+ puts("Video: ");
+
+ /* Suck display configuration from "videomode" variable */
+ penv = getenv("videomode");
+ if (!penv) {
+ printf("MXSFB: 'videomode' variable not set!");
+ return NULL;
+ }
+
+ bpp = video_get_params(&mode, penv);
+
+ /* fill in Graphic device struct */
+ sprintf(panel.modeIdent, "%dx%dx%d",
+ mode.xres, mode.yres, bpp);
+
+ panel.winSizeX = mode.xres;
+ panel.winSizeY = mode.yres;
+ panel.plnSizeX = mode.xres;
+ panel.plnSizeY = mode.yres;
+
+ switch (bpp) {
+ case 24:
+ case 18:
+ panel.gdfBytesPP = 4;
+ panel.gdfIndex = GDF_32BIT_X888RGB;
+ break;
+ case 16:
+ panel.gdfBytesPP = 2;
+ panel.gdfIndex = GDF_16BIT_565RGB;
+ break;
+ case 8:
+ panel.gdfBytesPP = 1;
+ panel.gdfIndex = GDF__8BIT_INDEX;
+ break;
+ default:
+ printf("MXSFB: Invalid BPP specified! (bpp = %i)\n", bpp);
+ return NULL;
+ }
+
+ panel.memSize = mode.xres * mode.yres * panel.gdfBytesPP;
+
+ /* Allocate framebuffer */
+ fb = malloc(panel.memSize);
+ if (!fb) {
+ printf("MXSFB: Error allocating framebuffer!\n");
+ return NULL;
+ }
+
+ /* Wipe framebuffer */
+ memset(fb, 0, panel.memSize);
+
+ panel.frameAdrs = (u32)fb;
+
+ printf("%s\n", panel.modeIdent);
+
+ /* Start framebuffer */
+ mxs_lcd_init(&panel, &mode, bpp);
+
+ return (void *)&panel;
+}
diff --git a/drivers/video/pxa_lcd.c b/drivers/video/pxa_lcd.c
index b40ec36..5e4c685 100644
--- a/drivers/video/pxa_lcd.c
+++ b/drivers/video/pxa_lcd.c
@@ -248,6 +248,38 @@
};
#endif /* CONFIG_ACX517AKN */
+#ifdef CONFIG_ACX544AKN
+
+# define LCD_BPP LCD_COLOR16
+
+/* you have to set lccr0 and lccr3 (including pcd) */
+# define REG_LCCR0 0x003008f9
+# define REG_LCCR3 0x04700007 /* 16bpp */
+
+vidinfo_t panel_info = {
+ .vl_col = 320,
+ .vl_row = 320,
+ .vl_width = 320,
+ .vl_height = 320,
+ .vl_clkp = CONFIG_SYS_LOW,
+ .vl_oep = CONFIG_SYS_LOW,
+ .vl_hsp = CONFIG_SYS_LOW,
+ .vl_vsp = CONFIG_SYS_LOW,
+ .vl_dp = CONFIG_SYS_LOW,
+ .vl_bpix = LCD_BPP,
+ .vl_lbw = 0,
+ .vl_splt = 0,
+ .vl_clor = 1,
+ .vl_tft = 1,
+ .vl_hpw = 0x05,
+ .vl_blw = 0x13,
+ .vl_elw = 0x08,
+ .vl_vpw = 0x02,
+ .vl_bfw = 0x07,
+ .vl_efw = 0x05,
+};
+#endif /* CONFIG_ACX544AKN */
+
/*----------------------------------------------------------------------*/
#ifdef CONFIG_LQ038J7DH53
@@ -378,7 +410,7 @@
#endif /* LCD_MONOCHROME */
/*----------------------------------------------------------------------*/
-void lcd_enable (void)
+__weak void lcd_enable(void)
{
}
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index d57578d..b9bbbc6 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -27,7 +27,7 @@
COBJS-$(CONFIG_AT91SAM9_WATCHDOG) += at91sam9_wdt.o
COBJS-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o
-ifneq (,$(filter $(SOC), mx31 mx35 mx5 mx6))
+ifneq (,$(filter $(SOC), mx31 mx35 mx5 mx6 vf610))
COBJS-y += imx_watchdog.o
endif
COBJS-$(CONFIG_TNETV107X_WATCHDOG) += tnetv107x_wdt.o
diff --git a/examples/standalone/mem_to_mem_idma2intr.c b/examples/standalone/mem_to_mem_idma2intr.c
index e466c90..215dc22 100644
--- a/examples/standalone/mem_to_mem_idma2intr.c
+++ b/examples/standalone/mem_to_mem_idma2intr.c
@@ -309,7 +309,8 @@
memaddr = dpalloc (sizeof (pram_idma_t), 64);
- *(volatile ushort *) &immap->im_dprambase[PROFF_IDMA2_BASE] = memaddr;
+ *(volatile u16 *)&immap->im_dprambase16
+ [PROFF_IDMA2_BASE / sizeof(u16)] = memaddr;
piptr = (volatile pram_idma_t *) ((uint) (immap) + memaddr);
piptr->pi_resv1 = 0; /* manual says: clear it */
diff --git a/fs/ext4/dev.c b/fs/ext4/dev.c
index 3e993cc..81b7633 100644
--- a/fs/ext4/dev.c
+++ b/fs/ext4/dev.c
@@ -51,11 +51,11 @@
{
assert(rbdd->blksz == (1 << rbdd->log2blksz));
ext4fs_block_dev_desc = rbdd;
+ get_fs()->dev_desc = rbdd;
part_info = info;
part_offset = info->start;
get_fs()->total_sect = (info->size * info->blksz) >>
get_fs()->dev_desc->log2blksz;
- get_fs()->dev_desc = rbdd;
}
int ext4fs_devread(int sector, int byte_offset, int byte_len, char *buf)
diff --git a/fs/yaffs2/yaffs_mtdif.c b/fs/yaffs2/yaffs_mtdif.c
index db49052..6fcba04 100644
--- a/fs/yaffs2/yaffs_mtdif.c
+++ b/fs/yaffs2/yaffs_mtdif.c
@@ -70,22 +70,22 @@
u8 spareAsBytes[8]; /* OOB */
if (data && !spare)
- retval = mtd->write(mtd, addr, dev->data_bytes_per_chunk,
+ retval = mtd_write(mtd, addr, dev->data_bytes_per_chunk,
&dummy, data);
else if (spare) {
if (dev->param.use_nand_ecc) {
translate_spare2oob(spare, spareAsBytes);
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.ooblen = 8; /* temp hack */
} else {
- ops.mode = MTD_OOB_RAW;
+ ops.mode = MTD_OPS_RAW;
ops.ooblen = YAFFS_BYTES_PER_SPARE;
}
ops.len = data ? dev->data_bytes_per_chunk : ops.ooblen;
ops.datbuf = (u8 *)data;
ops.ooboffs = 0;
ops.oobbuf = spareAsBytes;
- retval = mtd->write_oob(mtd, addr, &ops);
+ retval = mtd_write_oob(mtd, addr, &ops);
}
if (retval == 0)
@@ -106,21 +106,21 @@
u8 spareAsBytes[8]; /* OOB */
if (data && !spare)
- retval = mtd->read(mtd, addr, dev->data_bytes_per_chunk,
+ retval = mtd_read(mtd, addr, dev->data_bytes_per_chunk,
&dummy, data);
else if (spare) {
if (dev->param.use_nand_ecc) {
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.ooblen = 8; /* temp hack */
} else {
- ops.mode = MTD_OOB_RAW;
+ ops.mode = MTD_OPS_RAW;
ops.ooblen = YAFFS_BYTES_PER_SPARE;
}
ops.len = data ? dev->data_bytes_per_chunk : ops.ooblen;
ops.datbuf = data;
ops.ooboffs = 0;
ops.oobbuf = spareAsBytes;
- retval = mtd->read_oob(mtd, addr, &ops);
+ retval = mtd_read_oob(mtd, addr, &ops);
if (dev->param.use_nand_ecc)
translate_oob2spare(spare, spareAsBytes);
}
@@ -151,7 +151,7 @@
/* Todo finish off the ei if required */
- retval = mtd->erase(mtd, &ei);
+ retval = mtd_erase(mtd, &ei);
if (retval == 0)
return YAFFS_OK;
diff --git a/fs/yaffs2/yaffs_mtdif2.c b/fs/yaffs2/yaffs_mtdif2.c
index 8135bcc..234cb70 100644
--- a/fs/yaffs2/yaffs_mtdif2.c
+++ b/fs/yaffs2/yaffs_mtdif2.c
@@ -77,13 +77,13 @@
yaffs_pack_tags2(&pt, tags, !dev->param.no_tags_ecc);
}
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.ooblen = (dev->param.inband_tags) ? 0 : packed_tags_size;
ops.len = dev->param.total_bytes_per_chunk;
ops.ooboffs = 0;
ops.datbuf = (u8 *) data;
ops.oobbuf = (dev->param.inband_tags) ? NULL : packed_tags_ptr;
- retval = mtd->write_oob(mtd, addr, &ops);
+ retval = mtd_write_oob(mtd, addr, &ops);
if (retval == 0)
return YAFFS_OK;
@@ -121,16 +121,16 @@
}
if (dev->param.inband_tags || (data && !tags))
- retval = mtd->read(mtd, addr, dev->param.total_bytes_per_chunk,
+ retval = mtd_read(mtd, addr, dev->param.total_bytes_per_chunk,
&dummy, data);
else if (tags) {
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.ooblen = packed_tags_size;
ops.len = data ? dev->data_bytes_per_chunk : packed_tags_size;
ops.ooboffs = 0;
ops.datbuf = data;
ops.oobbuf = local_spare;
- retval = mtd->read_oob(mtd, addr, &ops);
+ retval = mtd_read_oob(mtd, addr, &ops);
}
if (dev->param.inband_tags) {
@@ -179,7 +179,7 @@
"nandmtd2_MarkNANDBlockBad %d", blockNo);
retval =
- mtd->block_markbad(mtd,
+ mtd_block_markbad(mtd,
blockNo * dev->param.chunks_per_block *
dev->data_bytes_per_chunk);
@@ -198,7 +198,7 @@
yaffs_trace(YAFFS_TRACE_MTD, "nandmtd2_QueryNANDBlock %d", blockNo);
retval =
- mtd->block_isbad(mtd,
+ mtd_block_isbad(mtd,
blockNo * dev->param.chunks_per_block *
dev->data_bytes_per_chunk);
diff --git a/include/altera.h b/include/altera.h
index 7a2bece..6aad5ee 100644
--- a/include/altera.h
+++ b/include/altera.h
@@ -27,23 +27,6 @@
#ifndef _ALTERA_H_
#define _ALTERA_H_
-/* Altera Model definitions
- *********************************************************************/
-#define CONFIG_SYS_ACEX1K CONFIG_SYS_FPGA_DEV( 0x1 )
-#define CONFIG_SYS_CYCLON2 CONFIG_SYS_FPGA_DEV( 0x2 )
-#define CONFIG_SYS_STRATIX_II CONFIG_SYS_FPGA_DEV( 0x4 )
-
-#define CONFIG_SYS_ALTERA_ACEX1K (CONFIG_SYS_FPGA_ALTERA | CONFIG_SYS_ACEX1K)
-#define CONFIG_SYS_ALTERA_CYCLON2 (CONFIG_SYS_FPGA_ALTERA | CONFIG_SYS_CYCLON2)
-#define CONFIG_SYS_ALTERA_STRATIX_II (CONFIG_SYS_FPGA_ALTERA | CONFIG_SYS_STRATIX_II)
-/* Add new models here */
-
-/* Altera Interface definitions
- *********************************************************************/
-#define CONFIG_SYS_ALTERA_IF_PS CONFIG_SYS_FPGA_IF( 0x1 ) /* passive serial */
-#define CONFIG_SYS_ALTERA_IF_FPP CONFIG_SYS_FPGA_IF( 0x2 ) /* fast passive parallel */
-/* Add new interfaces here */
-
typedef enum { /* typedef Altera_iface */
min_altera_iface_type, /* insert all new types after this */
passive_serial, /* serial data and external clock */
diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h
index 5416f46..3e9ca11 100644
--- a/include/asm-generic/global_data.h
+++ b/include/asm-generic/global_data.h
@@ -68,9 +68,6 @@
unsigned long env_addr; /* Address of Environment struct */
unsigned long env_valid; /* Checksum of Environment valid? */
- /* TODO: is this the same as relocaddr, or something else? */
- unsigned long dest_addr; /* Post-relocation address of U-Boot */
- unsigned long dest_addr_sp;
unsigned long ram_top; /* Top address of RAM used by U-Boot */
unsigned long relocaddr; /* Start address of U-Boot in RAM */
diff --git a/include/atmel_mci.h b/include/atmel_mci.h
index c711881..31c4569 100644
--- a/include/atmel_mci.h
+++ b/include/atmel_mci.h
@@ -52,6 +52,8 @@
u32 ier; /* 0x44 */
u32 idr; /* 0x48 */
u32 imr; /* 0x4c */
+ u32 reserved[43];
+ u32 version;
} atmel_mci_t;
#endif /* __ASSEMBLY__ */
diff --git a/include/bootstage.h b/include/bootstage.h
index 6dc0422..ef07a87 100644
--- a/include/bootstage.h
+++ b/include/bootstage.h
@@ -37,6 +37,24 @@
BOOTSTAGEF_ALLOC = 1 << 1, /* Allocate an id */
};
+/* bootstate sub-IDs used for kernel and ramdisk ranges */
+enum {
+ BOOTSTAGE_SUB_FORMAT,
+ BOOTSTAGE_SUB_FORMAT_OK,
+ BOOTSTAGE_SUB_NO_UNIT_NAME,
+ BOOTSTAGE_SUB_UNIT_NAME,
+ BOOTSTAGE_SUB_SUBNODE,
+
+ BOOTSTAGE_SUB_CHECK,
+ BOOTSTAGE_SUB_HASH = 5,
+ BOOTSTAGE_SUB_CHECK_ARCH = 5,
+ BOOTSTAGE_SUB_CHECK_ALL,
+ BOOTSTAGE_SUB_GET_DATA,
+ BOOTSTAGE_SUB_CHECK_ALL_OK = 7,
+ BOOTSTAGE_SUB_GET_DATA_OK,
+ BOOTSTAGE_SUB_LOAD,
+};
+
/*
* A list of boot stages that we know about. Each of these indicates the
* state that we are at, and the action that we are about to perform. For
@@ -137,43 +155,24 @@
BOOTSTAGE_ID_NET_DONE_ERR,
BOOTSTAGE_ID_NET_DONE,
+ BOOTSTAGE_ID_FIT_FDT_START = 90,
/*
* Boot stages related to loading a FIT image. Some of these are a
* bit wonky.
*/
- BOOTSTAGE_ID_FIT_FORMAT = 100,
- BOOTSTAGE_ID_FIT_NO_UNIT_NAME,
- BOOTSTAGE_ID_FIT_UNIT_NAME,
- BOOTSTAGE_ID_FIT_CONFIG,
- BOOTSTAGE_ID_FIT_CHECK_SUBIMAGE,
- BOOTSTAGE_ID_FIT_CHECK_HASH = 104,
+ BOOTSTAGE_ID_FIT_KERNEL_START = 100,
- BOOTSTAGE_ID_FIT_CHECK_ARCH,
- BOOTSTAGE_ID_FIT_CHECK_KERNEL,
- BOOTSTAGE_ID_FIT_CHECKED,
-
- BOOTSTAGE_ID_FIT_KERNEL_INFO_ERR = 107,
- BOOTSTAGE_ID_FIT_KERNEL_INFO,
+ BOOTSTAGE_ID_FIT_CONFIG = 110,
BOOTSTAGE_ID_FIT_TYPE,
+ BOOTSTAGE_ID_FIT_KERNEL_INFO,
BOOTSTAGE_ID_FIT_COMPRESSION,
BOOTSTAGE_ID_FIT_OS,
BOOTSTAGE_ID_FIT_LOADADDR,
BOOTSTAGE_ID_OVERWRITTEN,
- BOOTSTAGE_ID_FIT_RD_FORMAT = 120,
- BOOTSTAGE_ID_FIT_RD_FORMAT_OK,
- BOOTSTAGE_ID_FIT_RD_NO_UNIT_NAME,
- BOOTSTAGE_ID_FIT_RD_UNIT_NAME,
- BOOTSTAGE_ID_FIT_RD_SUBNODE,
-
- BOOTSTAGE_ID_FIT_RD_CHECK,
- BOOTSTAGE_ID_FIT_RD_HASH = 125,
- BOOTSTAGE_ID_FIT_RD_CHECK_ALL,
- BOOTSTAGE_ID_FIT_RD_GET_DATA,
- BOOTSTAGE_ID_FIT_RD_CHECK_ALL_OK = 127,
- BOOTSTAGE_ID_FIT_RD_GET_DATA_OK,
- BOOTSTAGE_ID_FIT_RD_LOAD,
+ /* Next 10 IDs used by BOOTSTAGE_SUB_... */
+ BOOTSTAGE_ID_FIT_RD_START = 120, /* Ramdisk stages */
BOOTSTAGE_ID_IDE_FIT_READ = 140,
BOOTSTAGE_ID_IDE_FIT_READ_OK,
diff --git a/include/common.h b/include/common.h
index e682bd8..126891d 100644
--- a/include/common.h
+++ b/include/common.h
@@ -310,9 +310,6 @@
int parse_line (char *, char *[]);
void init_cmd_timeout(void);
void reset_cmd_timeout(void);
-#ifdef CONFIG_MENU
-int abortboot(int bootdelay);
-#endif
extern char console_buffer[];
/* arch/$(ARCH)/lib/board.c */
diff --git a/include/commproc.h b/include/commproc.h
index 7ca28c8..6959905 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -127,6 +127,7 @@
*/
#define PROFF_SCC1 ((uint)0x0000)
#define PROFF_IIC ((uint)0x0080)
+#define PROFF_REVNUM ((uint)0x00b0)
#define PROFF_SCC2 ((uint)0x0100)
#define PROFF_SPI ((uint)0x0180)
#define PROFF_SCC3 ((uint)0x0200)
diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h
index 53a2f05..d847069 100644
--- a/include/config_cmd_all.h
+++ b/include/config_cmd_all.h
@@ -40,6 +40,7 @@
#define CONFIG_CMD_FDOS /* Floppy DOS support */
#define CONFIG_CMD_FLASH /* flinfo, erase, protect */
#define CONFIG_CMD_FPGA /* FPGA configuration Support */
+#define CONFIG_CMD_FUSE /* Device fuse support */
#define CONFIG_CMD_GETTIME /* Get time since boot */
#define CONFIG_CMD_HASH /* calculate hash / digest */
#define CONFIG_CMD_HWFLOW /* RTS/CTS hw flow control */
diff --git a/include/configs/A3000.h b/include/configs/A3000.h
index b85244a..d506a55 100644
--- a/include/configs/A3000.h
+++ b/include/configs/A3000.h
@@ -96,6 +96,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#undef CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
diff --git a/include/configs/APC405.h b/include/configs/APC405.h
index 9a65cbc..1e39229 100644
--- a/include/configs/APC405.h
+++ b/include/configs/APC405.h
@@ -218,6 +218,7 @@
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
/* resource configuration */
diff --git a/include/configs/AR405.h b/include/configs/AR405.h
index 9994476..7337f53 100644
--- a/include/configs/AR405.h
+++ b/include/configs/AR405.h
@@ -157,6 +157,7 @@
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
/* resource configuration */
diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h
index 09aa763..35c3773 100644
--- a/include/configs/ASH405.h
+++ b/include/configs/ASH405.h
@@ -172,6 +172,7 @@
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_HOST /* select pci host function */
#undef CONFIG_PCI_PNP /* do pci plug-and-play */
/* resource configuration */
diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h
index b09119a..c15bbd8 100644
--- a/include/configs/B4860QDS.h
+++ b/include/configs/B4860QDS.h
@@ -36,7 +36,6 @@
/* High Level Configuration Options */
#define CONFIG_BOOKE
-#define CONFIG_E6500
#define CONFIG_E500 /* BOOKE e500 family */
#define CONFIG_E500MC /* BOOKE e500mc family */
#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */
@@ -528,6 +527,15 @@
#define CONFIG_SF_DEFAULT_MODE 0
/*
+ * MAPLE
+ */
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_MAPLE_MEM_PHYS 0xFA0000000ull
+#else
+#define CONFIG_SYS_MAPLE_MEM_PHYS 0xA0000000
+#endif
+
+/*
* General PCI
* Memory space is mapped 1-1, but I/O space must start from 0.
*/
@@ -612,6 +620,7 @@
#endif
#ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_E1000
@@ -623,7 +632,11 @@
#ifdef CONFIG_FMAN_ENET
#define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x10
#define CONFIG_SYS_FM1_DTSEC6_PHY_ADDR 0x11
-#define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 4
+
+/*B4860 QDS AMC2PEX-2S default PHY_ADDR */
+#define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0x7 /*SLOT 1*/
+#define CONFIG_SYS_FM1_10GEC2_PHY_ADDR 0x6 /*SLOT 2*/
+
#define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c
#define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d
diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h
index 431c686..9d15d0e 100644
--- a/include/configs/BSC9132QDS.h
+++ b/include/configs/BSC9132QDS.h
@@ -73,6 +73,7 @@
#if defined(CONFIG_PCI)
#define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */
#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */
#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h
index 1e3a564..7017f8c 100644
--- a/include/configs/CATcenter.h
+++ b/include/configs/CATcenter.h
@@ -327,6 +327,7 @@
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
#undef CONFIG_PCI_PNP /* do pci plug-and-play */
/* resource configuration */
diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h
index e102c36..c7904a1 100644
--- a/include/configs/CPC45.h
+++ b/include/configs/CPC45.h
@@ -450,6 +450,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_SYS_EARLY_PCI_INIT
#undef CONFIG_PCI_PNP
#undef CONFIG_PCI_SCAN_SHOW
diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h
index 11cf58b..bbd93ac 100644
--- a/include/configs/CPCI2DP.h
+++ b/include/configs/CPCI2DP.h
@@ -146,6 +146,7 @@
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
/* resource configuration */
diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h
index e3e5ebc..36476e0 100644
--- a/include/configs/CPCI405.h
+++ b/include/configs/CPCI405.h
@@ -155,6 +155,7 @@
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
/* resource configuration */
diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h
index c4fff48..4c12c85 100644
--- a/include/configs/CPCI4052.h
+++ b/include/configs/CPCI4052.h
@@ -176,6 +176,7 @@
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
/* resource configuration */
diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h
index 9122cbd..96b6c0a 100644
--- a/include/configs/CPCI405AB.h
+++ b/include/configs/CPCI405AB.h
@@ -173,6 +173,7 @@
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
/* resource configuration */
diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h
index f778af7..c4cc5fd 100644
--- a/include/configs/CPCI405DT.h
+++ b/include/configs/CPCI405DT.h
@@ -177,6 +177,7 @@
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
/* resource configuration */
diff --git a/include/configs/CPCIISER4.h b/include/configs/CPCIISER4.h
index 35daed0..78c66c7 100644
--- a/include/configs/CPCIISER4.h
+++ b/include/configs/CPCIISER4.h
@@ -140,6 +140,7 @@
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
/* resource configuration */
diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h
index aa5ce29..3e9c21c 100644
--- a/include/configs/CPU87.h
+++ b/include/configs/CPU87.h
@@ -192,6 +192,7 @@
#define CONFIG_CMD_I2C
#ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_CMD_PCI
#endif
diff --git a/include/configs/CU824.h b/include/configs/CU824.h
index a3ceed1..6632196 100644
--- a/include/configs/CU824.h
+++ b/include/configs/CU824.h
@@ -288,6 +288,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#undef CONFIG_PCI_PNP
diff --git a/include/configs/DU440.h b/include/configs/DU440.h
index bbe2713..4970ea6 100644
--- a/include/configs/DU440.h
+++ b/include/configs/DU440.h
@@ -357,6 +357,7 @@
* PCI stuff
*/
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_PNP /* do (not) pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE*/
diff --git a/include/configs/ELPPC.h b/include/configs/ELPPC.h
index 220372c..d10f4c1 100644
--- a/include/configs/ELPPC.h
+++ b/include/configs/ELPPC.h
@@ -242,6 +242,7 @@
* PCI stuff
*/
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_PNP /* pci plug-and-play */
#define CONFIG_PCI_HOST PCI_HOST_AUTO
#undef CONFIG_PCI_SCAN_SHOW
diff --git a/include/configs/G2000.h b/include/configs/G2000.h
index 08ba840..b6769ae 100644
--- a/include/configs/G2000.h
+++ b/include/configs/G2000.h
@@ -216,6 +216,7 @@
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_HOST /* select pci host function */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
/* resource configuration */
diff --git a/include/configs/HH405.h b/include/configs/HH405.h
index 444413d..d65377f 100644
--- a/include/configs/HH405.h
+++ b/include/configs/HH405.h
@@ -231,6 +231,7 @@
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_HOST /* select pci host function */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
/* resource configuration */
diff --git a/include/configs/HIDDEN_DRAGON.h b/include/configs/HIDDEN_DRAGON.h
index a62ef63..dbad1fd 100644
--- a/include/configs/HIDDEN_DRAGON.h
+++ b/include/configs/HIDDEN_DRAGON.h
@@ -93,6 +93,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#undef CONFIG_PCI_PNP
diff --git a/include/configs/HWW1U1A.h b/include/configs/HWW1U1A.h
index 791763a..2b72a33 100644
--- a/include/configs/HWW1U1A.h
+++ b/include/configs/HWW1U1A.h
@@ -188,6 +188,7 @@
#define CONFIG_PCI_PNP /* Scan PCI busses */
#define CONFIG_CMD_PCI /* Enable the "pci" command */
#define CONFIG_FSL_PCI_INIT /* Common FreeScale PCI initialization */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_FSL_PCIE_RESET /* We have PCI-E reset errata */
#define CONFIG_SYS_PCI_64BIT /* PCI resources are 64-bit */
#define CONFIG_PCI_SCAN_SHOW /* Display PCI scan during boot */
diff --git a/include/configs/JSE.h b/include/configs/JSE.h
index e0a0d8e..6ce789d 100644
--- a/include/configs/JSE.h
+++ b/include/configs/JSE.h
@@ -226,6 +226,7 @@
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
#undef CONFIG_PCI_PNP /* do pci plug-and-play */
/* resource configuration */
diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h
index 546e28b..8d5e8ff 100644
--- a/include/configs/KAREF.h
+++ b/include/configs/KAREF.h
@@ -268,6 +268,7 @@
*----------------------------------------------------------------------*/
/* General PCI */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices */
#define CONFIG_SYS_PCI_TARGBASE (CONFIG_SYS_PCI_MEMBASE)
diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h
index 1bc2c5a..536b755 100644
--- a/include/configs/M54455EVB.h
+++ b/include/configs/M54455EVB.h
@@ -238,7 +238,7 @@
/* FPGA - Spartan 2 */
/* experiment
-#define CONFIG_FPGA CONFIG_SYS_SPARTAN3
+#define CONFIG_FPGA
#define CONFIG_FPGA_COUNT 1
#define CONFIG_SYS_FPGA_PROG_FEEDBACK
#define CONFIG_SYS_FPGA_CHECK_CTRLC
diff --git a/include/configs/MERGERBOX.h b/include/configs/MERGERBOX.h
index c296e3c..2496639 100644
--- a/include/configs/MERGERBOX.h
+++ b/include/configs/MERGERBOX.h
@@ -36,6 +36,7 @@
#define CONFIG_SYS_TEXT_BASE 0xFC000000
#define CONFIG_PCI 1
+#define CONFIG_PCI_INDIRECT_BRIDGE 1
#define CONFIG_MASK_AER_AO
#define CONFIG_DISPLAY_AER_FULL
@@ -606,7 +607,7 @@
* FPGA
*/
#define CONFIG_FPGA_COUNT 1
-#define CONFIG_FPGA CONFIG_SYS_ALTERA_CYCLON2
+#define CONFIG_FPGA
#define CONFIG_FPGA_ALTERA
#define CONFIG_FPGA_CYCLON2
diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h
index 286f869..d1ef559 100644
--- a/include/configs/METROBOX.h
+++ b/include/configs/METROBOX.h
@@ -333,6 +333,7 @@
*----------------------------------------------------------------------*/
/* General PCI */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices */
#define CONFIG_SYS_PCI_TARGBASE (CONFIG_SYS_PCI_MEMBASE)
diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index 979495a..0d023ab 100644
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -206,6 +206,7 @@
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_FORCE /* configure as pci-host */
#define CONFIG_PCI_PNP /* pci plug-and-play */
/* resource configuration */
diff --git a/include/configs/MOUSSE.h b/include/configs/MOUSSE.h
index 1391ce5..b3dbd6f 100644
--- a/include/configs/MOUSSE.h
+++ b/include/configs/MOUSSE.h
@@ -330,6 +330,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#undef CONFIG_PCI_PNP
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index c4c41c7..c312b77 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -195,6 +195,7 @@
/*PCI*/
#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS
#define CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCI_PNP
#define CONFIG_PCI_BOOTDELAY 0
#define CONFIG_PCI_SCAN_SHOW
diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h
index 0474140..c5aa586 100644
--- a/include/configs/MPC8266ADS.h
+++ b/include/configs/MPC8266ADS.h
@@ -137,6 +137,7 @@
/* PCI */
#define CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCI_PNP
#define CONFIG_PCI_BOOTDELAY 0
#undef CONFIG_PCI_SCAN_SHOW
diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h
index 95a1885..f10555c 100644
--- a/include/configs/MPC8308RDB.h
+++ b/include/configs/MPC8308RDB.h
@@ -402,6 +402,7 @@
#define CONFIG_SYS_SCCR_PCIEXP1CM 1
#define CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCIE
#define CONFIG_PCI_PNP /* do pci plug-and-play */
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index c28dfe0..1d753e7 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -76,6 +76,7 @@
#endif
#define CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_FSL_ELBC 1
#define CONFIG_MISC_INIT_R
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index 767b976..ee806c4 100644
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -405,6 +405,7 @@
#define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000
#define CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCIE
#define CONFIG_PCI_PNP /* do pci plug-and-play */
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index 8d5ed0f..ac4c253 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -264,6 +264,7 @@
#define CONFIG_SYS_PCI1_IO_SIZE 0x04000000 /* 64M */
#ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCI_SKIP_HOST_BRIDGE
#define CONFIG_PCI_PNP /* do pci plug-and-play */
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index f592d3a..7c31f47 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -360,6 +360,7 @@
#ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_83XX_PCI_STREAMING
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index e5529c7..212089c 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -666,6 +666,7 @@
/* PCI @ 0x80000000 */
#ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE \
| BATL_PP_RW \
| BATL_MEMCOHERENCE)
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index 2c3f1f6..1130b59 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -393,6 +393,7 @@
* PCI
*/
#ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_MPC83XX_PCI2
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index a1fbd5e..a71ac2b 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -458,6 +458,7 @@
#ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_83XX_PCI_STREAMING
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index fc00952..fcca542 100644
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -314,6 +314,7 @@
#define CONFIG_SYS_PCI1_IO_SIZE 0x100000 /* 1M */
#ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCI_PNP /* do pci plug-and-play */
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index 8243661..480468f 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -395,6 +395,7 @@
#define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000
#ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#ifndef __ASSEMBLY__
extern int board_pci_host_broken(void);
#endif
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index 9ad7e3a..d5c9d05 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -421,6 +421,7 @@
#define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000
#ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index bcd77b6..cc2b7c3 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -84,6 +84,7 @@
#define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */
#define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
+#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */
#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index a0fe15e..6cb00ee 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -52,6 +52,7 @@
#endif
#define CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index a6bea15..d0e6ca6 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -40,6 +40,7 @@
#define CONFIG_SYS_TEXT_BASE 0xfff80000
#define CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index d5f3c5f..09d0835 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -44,6 +44,7 @@
#define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */
#define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
+#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */
#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 0e22cc7..d070f6a 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -52,6 +52,7 @@
#define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */
#undef CONFIG_PCI2
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
+#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */
#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 266cb54..483556b 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -40,6 +40,7 @@
#define CONFIG_SYS_TEXT_BASE 0xfff80000
#define CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index 35d15f4..525e88f 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -49,6 +49,7 @@
#define CONFIG_SYS_TEXT_BASE 0xfff80000
#define CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 5d69fb6..f1bfdcb 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -42,6 +42,7 @@
#define CONFIG_PCI1 1 /* PCI controller */
#define CONFIG_PCIE1 1 /* PCIE controller */
#define CONFIG_FSL_PCI_INIT 1 /* use common fsl pci init code */
+#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */
#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
#define CONFIG_TSEC_ENET /* tsec ethernet support */
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index acd3276..c54755f 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -41,6 +41,7 @@
#define CONFIG_PCI 1 /* Disable PCI/PCIE */
#define CONFIG_PCIE1 1 /* PCIE controller */
#define CONFIG_FSL_PCI_INIT 1 /* use common fsl pci init code */
+#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */
#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
#define CONFIG_QE /* Enable QE */
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index d233365..25303c4 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -71,6 +71,7 @@
#define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */
#define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
+#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */
#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
index c619827..f791e76 100644
--- a/include/configs/MPC8610HPCD.h
+++ b/include/configs/MPC8610HPCD.h
@@ -51,6 +51,7 @@
#define CONFIG_PCIE1 1 /* PCIe 1 connected to ULI bridge */
#define CONFIG_PCIE2 1 /* PCIe 2 connected to slot */
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
+#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */
#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 2643097..4a3ca01 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -510,6 +510,7 @@
* BAT2 Rapidio Memory
*/
#ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_SYS_DBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_MEM_PHYS_LOW, \
CONFIG_SYS_PCIE1_MEM_PHYS_HIGH) \
| BATL_PP_RW | BATL_CACHEINHIBIT \
diff --git a/include/configs/MUSENKI.h b/include/configs/MUSENKI.h
index 84a167d..8b04151 100644
--- a/include/configs/MUSENKI.h
+++ b/include/configs/MUSENKI.h
@@ -87,6 +87,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#undef CONFIG_PCI_PNP
diff --git a/include/configs/MVBC_P.h b/include/configs/MVBC_P.h
index 6850965..7271468 100644
--- a/include/configs/MVBC_P.h
+++ b/include/configs/MVBC_P.h
@@ -310,7 +310,7 @@
#undef FPGA_DEBUG
#undef CONFIG_SYS_FPGA_PROG_FEEDBACK
-#define CONFIG_FPGA CONFIG_SYS_ALTERA_CYCLON2
+#define CONFIG_FPGA
#define CONFIG_FPGA_ALTERA 1
#define CONFIG_FPGA_CYCLON2 1
#define CONFIG_FPGA_COUNT 1
diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h
index a99ad3c..afd4c03 100644
--- a/include/configs/MVBLM7.h
+++ b/include/configs/MVBLM7.h
@@ -42,6 +42,7 @@
#define CONFIG_SYS_IMMR 0xE0000000
#define CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCI_SKIP_HOST_BRIDGE
#define CONFIG_HARD_I2C
#define CONFIG_TSEC_ENET
@@ -499,7 +500,7 @@
""
#define CONFIG_FPGA_COUNT 1
-#define CONFIG_FPGA CONFIG_SYS_ALTERA_CYCLON2
+#define CONFIG_FPGA
#define CONFIG_FPGA_ALTERA
#define CONFIG_FPGA_CYCLON2
diff --git a/include/configs/MVBLUE.h b/include/configs/MVBLUE.h
index 52d1729..21f286e 100644
--- a/include/configs/MVBLUE.h
+++ b/include/configs/MVBLUE.h
@@ -154,6 +154,7 @@
*/
#define CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW
diff --git a/include/configs/MVSMR.h b/include/configs/MVSMR.h
index bf2f44e..5d2ff14 100644
--- a/include/configs/MVSMR.h
+++ b/include/configs/MVSMR.h
@@ -280,7 +280,7 @@
#undef FPGA_DEBUG
#undef CONFIG_SYS_FPGA_PROG_FEEDBACK
-#define CONFIG_FPGA CONFIG_SYS_XILINX_SPARTAN2
+#define CONFIG_FPGA
#define CONFIG_FPGA_XILINX 1
#define CONFIG_FPGA_SPARTAN2 1
#define CONFIG_FPGA_COUNT 1
diff --git a/include/configs/OCRTC.h b/include/configs/OCRTC.h
index 47110af..4a93417 100644
--- a/include/configs/OCRTC.h
+++ b/include/configs/OCRTC.h
@@ -136,6 +136,7 @@
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
/* resource configuration */
diff --git a/include/configs/ORSG.h b/include/configs/ORSG.h
index 9f754c2..cd1f425 100644
--- a/include/configs/ORSG.h
+++ b/include/configs/ORSG.h
@@ -134,6 +134,7 @@
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_ADAPTER /* select pci adapter */
#undef CONFIG_PCI_PNP /* no pci plug-and-play */
/* resource configuration */
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index 437ee6e..5185597 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -90,6 +90,7 @@
#define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */
#define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */
#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */
#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index 8b13b10..9c27182 100644
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -316,7 +316,6 @@
#define CONFIG_SYS_HUSH_PARSER
/* Video */
-#define CONFIG_FSL_DIU_FB
#ifdef CONFIG_FSL_DIU_FB
#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x10000)
@@ -336,7 +335,6 @@
#endif
#ifndef CONFIG_FSL_DIU_FB
-#define CONFIG_ATI
#endif
#ifdef CONFIG_ATI
@@ -458,6 +456,7 @@
#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */
#ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CONFIG_E1000 /* Define e1000 pci Ethernet card */
diff --git a/include/configs/P1023RDS.h b/include/configs/P1023RDS.h
index 878bd5f..4943d7c 100644
--- a/include/configs/P1023RDS.h
+++ b/include/configs/P1023RDS.h
@@ -73,6 +73,7 @@
#define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */
#define CONFIG_PCIE3 /* PCIE controler 3 (slot 3) */
#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */
#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
#define CONFIG_FSL_LAW /* Use common FSL init code */
diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index a57d9dd..6ce4cbe 100644
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -94,6 +94,7 @@
#define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */
#define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
+#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */
#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
#endif /* #if defined(CONFIG_PCI) */
diff --git a/include/configs/P2020COME.h b/include/configs/P2020COME.h
index c75f86c..05a75d8 100644
--- a/include/configs/P2020COME.h
+++ b/include/configs/P2020COME.h
@@ -58,6 +58,7 @@
#define CONFIG_PCIE3 1 /* PCIE controller 3 (slot 3) */
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
+#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */
#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
#endif /* #if defined(CONFIG_PCI) */
diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h
index a975ee1..229117c 100644
--- a/include/configs/P2020DS.h
+++ b/include/configs/P2020DS.h
@@ -73,6 +73,7 @@
#define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */
#define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
+#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */
#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index bbc53ce..9cd3a7c 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -560,6 +560,7 @@
#endif
#ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_E1000
diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h
index 119819e..c3cacef 100644
--- a/include/configs/PCI405.h
+++ b/include/configs/PCI405.h
@@ -141,6 +141,7 @@
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_ADAPTER /* select pci host function */
#undef CONFIG_PCI_PNP /* no pci plug-and-play */
/* resource configuration */
diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index 713ea12..3757af0 100644
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -199,6 +199,7 @@
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_FORCE /* configure as pci-host */
#define CONFIG_PCI_PNP /* pci plug-and-play */
/* resource configuration */
diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h
index 1ee0c48..1745eb3 100644
--- a/include/configs/PLU405.h
+++ b/include/configs/PLU405.h
@@ -192,6 +192,7 @@
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
/* resource configuration */
diff --git a/include/configs/PM826.h b/include/configs/PM826.h
index fbcf8e5..faadfe4 100644
--- a/include/configs/PM826.h
+++ b/include/configs/PM826.h
@@ -176,6 +176,7 @@
#define CONFIG_CMD_SNTP
#ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_CMD_PCI
#endif
diff --git a/include/configs/PM828.h b/include/configs/PM828.h
index c37aafd..f563fbe 100644
--- a/include/configs/PM828.h
+++ b/include/configs/PM828.h
@@ -176,6 +176,7 @@
#define CONFIG_CMD_SNTP
#ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_CMD_PCI
#endif
diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h
index 8235b85..d97acec 100644
--- a/include/configs/PMC405.h
+++ b/include/configs/PMC405.h
@@ -163,6 +163,7 @@
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
/* resource configuration */
diff --git a/include/configs/PMC405DE.h b/include/configs/PMC405DE.h
index 992443a..a427551 100644
--- a/include/configs/PMC405DE.h
+++ b/include/configs/PMC405DE.h
@@ -142,6 +142,7 @@
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */
#define CONFIG_PCI_PNP /* do (not) pci plug-and-play */
diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h
index 3837b8f..40c1827 100644
--- a/include/configs/PMC440.h
+++ b/include/configs/PMC440.h
@@ -419,6 +419,7 @@
*----------------------------------------------------------------------*/
/* General PCI */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_PNP /* do (not) pci plug-and-play */
#define CONFIG_SYS_PCI_CACHE_LINE_SIZE 0 /* to avoid problems with PNP */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
diff --git a/include/configs/PN62.h b/include/configs/PN62.h
index 93876b1..e2f96aa 100644
--- a/include/configs/PN62.h
+++ b/include/configs/PN62.h
@@ -122,6 +122,7 @@
* PCI stuff
*/
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_PNP /* we need Plug 'n Play */
#if 0
#define CONFIG_PCI_SCAN_SHOW /* show PCI auto-scan at boot */
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index 27a12b3..210bc30 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -324,6 +324,7 @@
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
#undef CONFIG_PCI_PNP /* do pci plug-and-play */
/* resource configuration */
diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h
index c0ffb33..318c4c5 100644
--- a/include/configs/SIMPC8313.h
+++ b/include/configs/SIMPC8313.h
@@ -52,6 +52,7 @@
#endif
#define CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_FSL_ELBC 1
#define CONFIG_MISC_INIT_R
diff --git a/include/configs/Sandpoint8240.h b/include/configs/Sandpoint8240.h
index f54fcb3..fa456ed 100644
--- a/include/configs/Sandpoint8240.h
+++ b/include/configs/Sandpoint8240.h
@@ -127,6 +127,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#undef CONFIG_PCI_PNP
diff --git a/include/configs/Sandpoint8245.h b/include/configs/Sandpoint8245.h
index 84e4891..cdc51a5 100644
--- a/include/configs/Sandpoint8245.h
+++ b/include/configs/Sandpoint8245.h
@@ -95,6 +95,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#undef CONFIG_PCI_PNP
diff --git a/include/configs/TQM8272.h b/include/configs/TQM8272.h
index be977f1..3b3f9e6 100644
--- a/include/configs/TQM8272.h
+++ b/include/configs/TQM8272.h
@@ -443,6 +443,7 @@
#define CONFIG_PCI
#ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#define CONFIG_PCI_PNP
#define CONFIG_EEPRO100
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index 0738423..966a6e3 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -442,6 +442,7 @@
/* PCI */
#ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCI1_MEM_BASE \
| BATL_PP_RW \
| BATL_MEMCOHERENCE)
diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h
index f1032f0..8f0c4b6 100644
--- a/include/configs/VOH405.h
+++ b/include/configs/VOH405.h
@@ -181,6 +181,7 @@
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_HOST /* select pci host function */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
/* resource configuration */
diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h
index 462b155..710812f 100644
--- a/include/configs/W7OLMC.h
+++ b/include/configs/W7OLMC.h
@@ -154,6 +154,7 @@
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */
#define CONFIG_PCI_PNP /* pci plug-and-play */
/* resource configuration */
diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h
index f28f3e4..f88dfe4 100644
--- a/include/configs/W7OLMG.h
+++ b/include/configs/W7OLMG.h
@@ -161,6 +161,7 @@
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */
#define CONFIG_PCI_PNP /* pci plug-and-play */
/* resource configuration */
diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h
index 5def36a..0c78aca 100644
--- a/include/configs/WUH405.h
+++ b/include/configs/WUH405.h
@@ -169,6 +169,7 @@
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_HOST /* select pci host function */
#undef CONFIG_PCI_PNP /* do pci plug-and-play */
/* resource configuration */
diff --git a/include/configs/ac14xx.h b/include/configs/ac14xx.h
index ac7e877..7cb10fb 100644
--- a/include/configs/ac14xx.h
+++ b/include/configs/ac14xx.h
@@ -368,6 +368,11 @@
#define CONFIG_SYS_I2C_SLAVE 0x7F
/*
+ * IIM - IC Identification Module
+ */
+#undef CONFIG_FSL_IIM
+
+/*
* EEPROM configuration for Atmel AT24C01:
* 8-bit addresses, 30ms write delay, 32-Byte Page Write Mode
*/
diff --git a/include/configs/adp-ag102.h b/include/configs/adp-ag102.h
index eea44db..a6e1849 100644
--- a/include/configs/adp-ag102.h
+++ b/include/configs/adp-ag102.h
@@ -143,6 +143,7 @@
*/
#define CONFIG_PCI
#define CONFIG_FTPCI100
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_FTPCI100_MEM_BASE 0xa0000000
#define CONFIG_FTPCI100_IO_SIZE FTPCI100_BASE_IO_SIZE(256) /* 256M */
#define CONFIG_FTPCI100_MEM_SIZE FTPCI100_MEM_SIZE(128) /* 128M */
diff --git a/include/configs/alpr.h b/include/configs/alpr.h
index 0d53e51..d93d5e2 100644
--- a/include/configs/alpr.h
+++ b/include/configs/alpr.h
@@ -287,6 +287,7 @@
*/
/* General PCI */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index ef00306..737e19e 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -17,6 +17,7 @@
#define __CONFIG_AM335X_EVM_H
#define CONFIG_AM33XX
+#define CONFIG_OMAP
#include <asm/arch/omap.h>
@@ -196,7 +197,6 @@
+ (8 * 1024 * 1024))
#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */
-#define CONFIG_SYS_HZ 1000 /* 1ms clock */
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
@@ -260,12 +260,11 @@
/* Platform/Board specific defs */
#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_HZ 1000 /* 1ms clock */
/* NS16550 Configuration */
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SERIAL_MULTI
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
#define CONFIG_SYS_NS16550_CLK (48000000)
#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
@@ -295,6 +294,9 @@
#define CONFIG_SYS_BAUDRATE_TABLE { 110, 300, 600, 1200, 2400, \
4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 }
+/* CPU */
+#define CONFIG_ARCH_CPU_INIT
+
#define CONFIG_ENV_OVERWRITE 1
#define CONFIG_SYS_CONSOLE_INFO_QUIET
@@ -303,17 +305,45 @@
/* Defines for SPL */
#define CONFIG_SPL
#define CONFIG_SPL_FRAMEWORK
+/*
+ * Place the image at the start of the ROM defined image space.
+ * We limit our size to the ROM-defined downloaded image area, and use the
+ * rest of the space for stack.
+ */
#define CONFIG_SPL_TEXT_BASE 0x402F0400
-#define CONFIG_SPL_MAX_SIZE (101 * 1024)
+#define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE)
#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
-#define CONFIG_SPL_BSS_START_ADDR 0x80000000
+#define CONFIG_SPL_OS_BOOT
+
+#define CONFIG_SPL_BSS_START_ADDR 0x80a00000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
+
+#ifdef CONFIG_SPL_OS_BOOT
+/* fat */
+#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME "uImage"
+#define CONFIG_SPL_FAT_LOAD_ARGS_NAME "args"
+#define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_DRAM_1 + 0x100)
+
+/* raw mmc */
+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x500 /* address 0xa0000 */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x8 /* address 0x1000 */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 8 /* 4KB */
+
+/* nand */
+#define CONFIG_CMD_SPL_NAND_OFS 0x240000 /* end of u-boot */
+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
+#define CONFIG_CMD_SPL_WRITE_SIZE 0x1000
+
+/* spl export command */
+#define CONFIG_CMD_SPL
+#endif
+
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SPL_I2C_SUPPORT
@@ -360,11 +390,7 @@
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 14
-#define CONFIG_SYS_NAND_ECCSTEPS 4
-#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \
- CONFIG_SYS_NAND_ECCSTEPS)
-
-#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
@@ -375,7 +401,7 @@
* other needs.
*/
#define CONFIG_SYS_TEXT_BASE 0x80800000
-#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
+#define CONFIG_SYS_SPL_MALLOC_START 0x80a08000
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
/* Since SPL did pll and ddr initialization for us,
@@ -471,7 +497,8 @@
#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:128k(SPL)," \
"128k(SPL.backup1)," \
"128k(SPL.backup2)," \
- "128k(SPL.backup3),1920k(u-boot)," \
+ "128k(SPL.backup3),1792k(u-boot)," \
+ "128k(u-boot-spl-os)," \
"128k(u-boot-env),5m(kernel),-(rootfs)"
#define CONFIG_NAND_OMAP_GPMC
#define GPMC_NAND_ECC_LP_x16_LAYOUT 1
diff --git a/include/configs/aria.h b/include/configs/aria.h
index b425399..bd81053 100644
--- a/include/configs/aria.h
+++ b/include/configs/aria.h
@@ -350,6 +350,7 @@
* PCI
*/
#ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_SYS_PCI_MEM_BASE 0xA0000000
#define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BASE
@@ -383,7 +384,7 @@
/*
* IIM - IC Identification Module
*/
-#undef CONFIG_IIM
+#undef CONFIG_FSL_IIM
/*
* EEPROM configuration for Atmel AT24C32A-10TQ-2.7:
diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
index ebcc69a..4328944 100644
--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@@ -105,6 +105,8 @@
#define CONFIG_CMD_PING 1
#define CONFIG_CMD_DHCP 1
#define CONFIG_CMD_NAND 1
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_FAT
#define CONFIG_CMD_USB 1
/*
@@ -128,6 +130,24 @@
(ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
#endif
+/*
+ * The (arm)linux board id set by generic code depending on configured board
+ * (see boards.cfg for different boards)
+ */
+#ifdef CONFIG_AT91SAM9G20
+ /* the sam9g20 variants have two different board ids */
+# ifdef CONFIG_AT91SAM9G20EK_2MMC
+ /* we may be setup for the 2MMC variant of at91sam9g20ek */
+# define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9G20EK_2MMC
+# else
+ /* or the normal at91sam9g20ek */
+# define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9G20EK
+# endif
+#else
+ /* otherwise default to good old at91sam9260ek */
+# define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9260EK
+#endif
+
/* DataFlash */
#ifndef CONFIG_AT91SAM9G20EK_2MMC
#define CONFIG_ATMEL_DATAFLASH_SPI
@@ -158,6 +178,18 @@
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
#endif
+/* MMC */
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_GENERIC_ATMEL_MCI
+#endif
+
+/* FAT */
+#ifdef CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
/* NOR flash - no real flash on this board */
#define CONFIG_SYS_NO_FLASH 1
@@ -170,13 +202,11 @@
/* USB */
#define CONFIG_USB_ATMEL
#define CONFIG_USB_OHCI_NEW 1
-#define CONFIG_DOS_PARTITION 1
#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9260_UHP_BASE */
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
#define CONFIG_USB_STORAGE 1
-#define CONFIG_CMD_FAT 1
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
@@ -211,7 +241,7 @@
"mtdparts=atmel_nand:-(root) " \
"rw rootfstype=jffs2"
-#else /* CONFIG_SYS_USE_NANDFLASH */
+#elif defined(CONFIG_SYS_USE_NANDFLASH)
/* bootstrap + u-boot + env + linux in nandflash */
#define CONFIG_ENV_IS_IN_NAND 1
@@ -226,6 +256,22 @@
"512k(dtb),6M(kernel)ro,-(rootfs) " \
"root=/dev/mtdblock7 rw rootfstype=jffs2"
+#else /* CONFIG_SYS_USE_MMC */
+/* bootstrap + u-boot + env + linux in mmc */
+#define CONFIG_ENV_IS_IN_MMC
+/* For FAT system, most cases it should be in the reserved sector */
+#define CONFIG_ENV_OFFSET 0x2000
+#define CONFIG_ENV_SIZE 0x1000
+#define CONFIG_SYS_MMC_ENV_DEV 0
+
+#define CONFIG_BOOTCOMMAND \
+ "fatload mmc 0:1 0x22000000 uImage; bootm"
+#define CONFIG_BOOTARGS \
+ "console=ttyS0,115200 earlyprintk " \
+ "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
+ "256k(env),256k(env_redundant),256k(spare)," \
+ "512k(dtb),6M(kernel)ro,-(rootfs) " \
+ "root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait"
#endif
#define CONFIG_SYS_PROMPT "U-Boot> "
diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h
new file mode 100644
index 0000000..8d2673d
--- /dev/null
+++ b/include/configs/at91sam9n12ek.h
@@ -0,0 +1,232 @@
+/*
+ * (C) Copyright 2013 Atmel Corporation.
+ * Josh Wu <josh.wu@atmel.com>
+ *
+ * Configuation settings for the AT91SAM9N12-EK boards.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __AT91SAM9N12_CONFIG_H_
+#define __AT91SAM9N12_CONFIG_H_
+
+/*
+ * SoC must be defined first, before hardware.h is included.
+ * In this case SoC is defined in boards.cfg.
+ */
+#include <asm/hardware.h>
+
+#define CONFIG_SYS_TEXT_BASE 0x26f00000
+
+#define CONFIG_ARM926EJS
+#define CONFIG_AT91FAMILY
+
+/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
+#define CONFIG_SYS_AT91_MAIN_CLOCK 16000000 /* main clock xtal */
+#define CONFIG_SYS_HZ 1000
+
+/* Misc CPU related */
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_OF_LIBFDT
+
+/* general purpose I/O */
+#define CONFIG_AT91_GPIO
+
+/* serial console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE ATMEL_BASE_DBGU
+#define CONFIG_USART_ID ATMEL_ID_SYS
+#define CONFIG_BAUDRATE 115200
+
+/* LCD */
+#define CONFIG_LCD
+#define LCD_BPP LCD_COLOR16
+#define LCD_OUTPUT_BPP 24
+#define CONFIG_LCD_LOGO
+#define CONFIG_LCD_INFO
+#define CONFIG_LCD_INFO_BELOW_LOGO
+#define CONFIG_SYS_WHITE_ON_BLACK
+#define CONFIG_ATMEL_HLCD
+#define CONFIG_ATMEL_LCD_RGB565
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+#define CONFIG_BOOTDELAY 3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/* NOR flash - no real flash on this board */
+#define CONFIG_SYS_NO_FLASH
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_FPGA
+
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_FAT
+
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_BASE 0x20000000
+#define CONFIG_SYS_SDRAM_SIZE 0x08000000
+
+/*
+ * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM,
+ * leaving the correct space for initial global data structure above
+ * that address while providing maximum stack area below.
+ */
+# define CONFIG_SYS_INIT_SP_ADDR \
+ (ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE)
+
+/* DataFlash */
+#ifdef CONFIG_CMD_SF
+#define CONFIG_ATMEL_SPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_ATMEL
+#define CONFIG_SF_DEFAULT_SPEED 30000000
+#define CONFIG_ENV_SPI_MODE SPI_MODE_3
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
+#endif
+
+/* NAND flash */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE 0x40000000
+#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
+#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 4
+#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTD, 5
+
+/* PMECC & PMERRLOC */
+#define CONFIG_ATMEL_NAND_HWECC
+#define CONFIG_ATMEL_NAND_HW_PMECC
+#define CONFIG_PMECC_CAP 2
+#define CONFIG_PMECC_SECTOR_SIZE 512
+#define CONFIG_PMECC_INDEX_TABLE_OFFSET 0x8000
+#endif
+
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_CMD_MTDPARTS
+#define MTDIDS_DEFAULT "nand0=atmel_nand"
+#define MTDPARTS_DEFAULT \
+ "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
+ "256k(env),256k(env_redundant),256k(spare)," \
+ "512k(dtb),6M(kernel)ro,-(rootfs)"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "console=console=ttyS0,115200\0" \
+ "mtdparts="MTDPARTS_DEFAULT"\0" \
+ "bootargs_nand=rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw\0"\
+ "bootargs_mmc=root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait\0"
+
+/* MMC */
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_GENERIC_ATMEL_MCI
+#endif
+
+/* FAT */
+#ifdef CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
+#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
+
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END 0x26e00000
+
+#ifdef CONFIG_SYS_USE_SPIFLASH
+
+/* bootstrap + u-boot + env + linux in dataflash on CS0 */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_OFFSET 0x5000
+#define CONFIG_ENV_SIZE 0x3000
+#define CONFIG_ENV_SECT_SIZE 0x1000
+#define CONFIG_BOOTCOMMAND \
+ "setenv bootargs ${console} ${mtdparts} ${bootargs_nand};" \
+ "sf probe 0; sf read 0x22000000 0x100000 0x300000; " \
+ "bootm 0x22000000"
+
+#elif defined(CONFIG_SYS_USE_NANDFLASH)
+
+/* bootstrap + u-boot + env + linux in nandflash */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET 0xc0000
+#define CONFIG_ENV_OFFSET_REDUND 0x100000
+#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
+#define CONFIG_BOOTCOMMAND \
+ "setenv bootargs ${console} ${mtdparts} ${bootargs_nand};" \
+ "nand read 0x21000000 0x180000 0x080000;" \
+ "nand read 0x22000000 0x200000 0x400000;" \
+ "bootm 0x22000000 - 0x21000000"
+
+#else /* CONFIG_SYS_USE_MMC */
+
+/* bootstrap + u-boot + env + linux in mmc */
+#define CONFIG_ENV_IS_IN_MMC
+/* For FAT system, most cases it should be in the reserved sector */
+#define CONFIG_ENV_OFFSET 0x2000
+#define CONFIG_ENV_SIZE 0x1000
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_BOOTCOMMAND \
+ "setenv bootargs ${console} ${mtdparts} ${bootargs_mmc};" \
+ "fatload mmc 0:1 0x21000000 dtb;" \
+ "fatload mmc 0:1 0x22000000 uImage;" \
+ "bootm 0x22000000 - 0x21000000"
+
+#endif
+
+#define CONFIG_SYS_PROMPT "U-Boot> "
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) \
+ + 16)
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
+#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */
+
+#endif
diff --git a/include/configs/atc.h b/include/configs/atc.h
index 538a167..57c4b33 100644
--- a/include/configs/atc.h
+++ b/include/configs/atc.h
@@ -263,6 +263,7 @@
#endif
#define CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCI_PNP
#define CONFIG_SYS_PCI_MSTR_IO_BUS 0x00000000 /* PCI base */
diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h
index 506a558..d36984d 100644
--- a/include/configs/bamboo.h
+++ b/include/configs/bamboo.h
@@ -293,6 +293,7 @@
*/
/* General PCI */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE*/
diff --git a/include/configs/bubinga.h b/include/configs/bubinga.h
index da67ae3..35a473a 100644
--- a/include/configs/bubinga.h
+++ b/include/configs/bubinga.h
@@ -153,6 +153,7 @@
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
/* resource configuration */
diff --git a/include/configs/ca9x4_ct_vxp.h b/include/configs/ca9x4_ct_vxp.h
deleted file mode 100644
index a7cd1d4..0000000
--- a/include/configs/ca9x4_ct_vxp.h
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * (C) Copyright 2010 Linaro
- * Matt Waddel, <matt.waddel@linaro.org>
- *
- * Configuration for Versatile Express. Parts were derived from other ARM
- * configurations.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* Board info register */
-#define SYS_ID 0x10000000
-#define CONFIG_REVISION_TAG 1
-#define CONFIG_SYS_TEXT_BASE 0x60800000
-
-#define CONFIG_SYS_MEMTEST_START 0x60000000
-#define CONFIG_SYS_MEMTEST_END 0x20000000
-#define CONFIG_SYS_HZ 1000
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_SYS_L2CACHE_OFF 1
-#define CONFIG_INITRD_TAG 1
-
-#define CONFIG_OF_LIBFDT 1
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
-
-#define SCTL_BASE 0x10001000
-#define VEXPRESS_FLASHPROG_FLVPPEN (1 << 0)
-
-/* SMSC9115 Ethernet from SMSC9118 family */
-#define CONFIG_SMC911X 1
-#define CONFIG_SMC911X_32_BIT 1
-#define CONFIG_SMC911X_BASE 0x4E000000
-
-/* PL011 Serial Configuration */
-#define CONFIG_PL011_SERIAL
-#define CONFIG_PL011_CLOCK 24000000
-#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \
- (void *)CONFIG_SYS_SERIAL1}
-#define CONFIG_CONS_INDEX 0
-
-#define CONFIG_BAUDRATE 38400
-#define CONFIG_SYS_SERIAL0 0x10009000
-#define CONFIG_SYS_SERIAL1 0x1000A000
-
-/* Command line configuration */
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PXE
-#define CONFIG_MENU
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_RUN
-
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION 1
-#define CONFIG_MMC 1
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_ARM_PL180_MMCI
-#define CONFIG_ARM_PL180_MMCI_BASE 0x10005000
-#define CONFIG_SYS_MMC_MAX_BLK_COUNT 127
-#define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ 6250000
-
-/* BOOTP options */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_PXE
-#define CONFIG_BOOTP_PXE_CLIENTARCH 0x100
-#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.ca9x4_ct_vxp"
-
-/* Miscellaneous configurable options */
-#undef CONFIG_SYS_CLKS_IN_HZ
-#define CONFIG_SYS_LOAD_ADDR 0x60008000 /* load address */
-#define LINUX_BOOT_PARAM_ADDR 0x60000200
-#define CONFIG_BOOTDELAY 2
-
-/* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS 2
-#define PHYS_SDRAM_1 0x60000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_2 0x80000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */
-#define PHYS_SDRAM_2_SIZE 0x20000000 /* 512 MB */
-
-/* additions for new relocation code */
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \
- CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET
-
-/* Basic environment settings */
-#define CONFIG_BOOTCOMMAND "run bootflash;"
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "loadaddr=0x80008000\0" \
- "ramdisk_addr_r=0x61000000\0" \
- "kernel_addr=0x44100000\0" \
- "ramdisk_addr=0x44800000\0" \
- "maxramdisk=0x1800000\0" \
- "pxefile_addr_r=0x88000000\0" \
- "kernel_addr_r=0x80008000\0" \
- "console=ttyAMA0,38400n8\0" \
- "dram=1024M\0" \
- "root=/dev/sda1 rw\0" \
- "mtd=armflash:1M@0x800000(uboot),7M@0x1000000(kernel)," \
- "24M@0x2000000(initrd)\0" \
- "flashargs=setenv bootargs root=${root} console=${console} " \
- "mem=${dram} mtdparts=${mtd} mmci.fmax=190000 " \
- "devtmpfs.mount=0 vmalloc=256M\0" \
- "bootflash=run flashargs; " \
- "cp ${ramdisk_addr} ${ramdisk_addr_r} ${maxramdisk}; " \
- "bootm ${kernel_addr} ${ramdisk_addr_r}\0"
-
-/* FLASH and environment organization */
-#define PHYS_FLASH_SIZE 0x04000000 /* 64MB */
-#define CONFIG_SYS_FLASH_CFI 1
-#define CONFIG_FLASH_CFI_DRIVER 1
-#define CONFIG_SYS_FLASH_SIZE 0x04000000
-#define CONFIG_SYS_MAX_FLASH_BANKS 2
-#define CONFIG_SYS_FLASH_BASE0 0x40000000
-#define CONFIG_SYS_FLASH_BASE1 0x44000000
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE0
-
-/* Timeout values in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Erase Timeout */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Write Timeout */
-
-/* 255 0x40000 sectors + first or last sector may have 4 erase regions = 259 */
-#define CONFIG_SYS_MAX_FLASH_SECT 259 /* Max sectors */
-#define FLASH_MAX_SECTOR_SIZE 0x00040000 /* 256 KB sectors */
-
-/* Room required on the stack for the environment data */
-#define CONFIG_ENV_SIZE FLASH_MAX_SECTOR_SIZE
-
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */
-
-/*
- * Amount of flash used for environment:
- * We don't know which end has the small erase blocks so we use the penultimate
- * sector location for the environment
- */
-#define CONFIG_ENV_SECT_SIZE FLASH_MAX_SECTOR_SIZE
-#define CONFIG_ENV_OVERWRITE 1
-
-/* Store environment at top of flash */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET (PHYS_FLASH_SIZE - \
- (2 * CONFIG_ENV_SECT_SIZE))
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE1 + \
- CONFIG_ENV_OFFSET)
-#define CONFIG_SYS_FLASH_PROTECTION /* The devices have real protection */
-#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE0, \
- CONFIG_SYS_FLASH_BASE1 }
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PROMPT "VExpress# "
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */
-#define CONFIG_CMD_SOURCE
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING 1
-#define CONFIG_SYS_MAXARGS 16 /* max command args */
-
-#endif
diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h
index acb127c..92106d7 100644
--- a/include/configs/canyonlands.h
+++ b/include/configs/canyonlands.h
@@ -496,6 +496,7 @@
*----------------------------------------------------------------------*/
/* General PCI */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CONFIG_PCI_CONFIG_HOST_BRIDGE
diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h
new file mode 100644
index 0000000..1363858
--- /dev/null
+++ b/include/configs/cgtqmx6eval.h
@@ -0,0 +1,194 @@
+/*
+ *
+ * Congatec Conga-QEVAl board configuration file.
+ *
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ * Based on Freescale i.MX6Q Sabre Lite board configuration file.
+ * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
+ * Leo Sartre, <lsartre@adeneo-embedded.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_CGTQMX6EVAL_H
+#define __CONFIG_CGTQMX6EVAL_H
+
+#define CONFIG_MX6
+
+#include "mx6_common.h"
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define CONFIG_MACH_TYPE 4122
+
+#include <asm/arch/imx-regs.h>
+#include <asm/imx-common/gpio.h>
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_MISC_INIT_R
+#define CONFIG_MXC_GPIO
+
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE UART2_BASE
+
+/* MMC Configs */
+#define CONFIG_FSL_ESDHC
+#define CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+
+#define CONFIG_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_BOUNCE_BUFFER
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+
+/* Miscellaneous commands */
+#define CONFIG_CMD_BMODE
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+
+/* Command definition */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_BOOTDELAY 3
+
+#define CONFIG_LOADADDR 0x12000000
+#define CONFIG_SYS_TEXT_BASE 0x17800000
+
+#define CONFIG_DEFAULT_FDT_FILE "imx6q-congatec.dtb"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "script=boot.scr\0" \
+ "uimage=uImage\0" \
+ "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
+ "boot_dir=/boot\0" \
+ "console=ttymxc1\0" \
+ "fdt_high=0xffffffff\0" \
+ "initrd_high=0xffffffff\0" \
+ "fdt_addr=0x11000000\0" \
+ "boot_fdt=try\0" \
+ "mmcdev=1\0" \
+ "mmcpart=1\0" \
+ "mmcroot=/dev/mmcblk0p1 rootwait rw\0" \
+ "mmcargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${mmcroot}\0" \
+ "loadbootscript=" \
+ "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+ "bootscript=echo Running bootscript from mmc ...; " \
+ "source\0" \
+ "loaduimage=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
+ "${boot_dir}/${uimage}\0" \
+ "loadfdt=ext2load mmc ${mmcdev}:${mmcpart} ${fdt_addr} " \
+ "${boot_dir}/${fdt_file}\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+ "if run loadfdt; then " \
+ "bootm ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootm; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootm; " \
+ "fi;\0"
+
+#define CONFIG_BOOTCOMMAND \
+ "mmc dev ${mmcdev};" \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loaduimage; then " \
+ "run mmcboot; " \
+ "else "\
+ "echo ERR: Fail to boot from mmc; " \
+ "fi; " \
+ "fi; " \
+ "else echo ERR: Fail to boot from mmc; fi"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT "CGT-QMX6-Quad U-Boot > "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE 256
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_MEMTEST_START 0x10000000
+#define CONFIG_SYS_MEMTEST_END 0x10010000
+#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_CMDLINE_EDITING
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
+#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ENV_SIZE (8 * 1024)
+
+#define CONFIG_ENV_IS_IN_MMC
+
+#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
+#define CONFIG_SYS_MMC_ENV_DEV 0
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_CMD_BOOTZ
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+#define CONFIG_CMD_CACHE
+#endif
+
+#endif /* __CONFIG_CGTQMX6EVAL_H */
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 726714d..c6e357a 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -135,12 +135,12 @@
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_EXT2 /* EXT2 Support */
#define CONFIG_CMD_FAT /* FAT support */
-#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
+#define CONFIG_MTD_PARTITIONS
#define MTDIDS_DEFAULT "nand0=nand"
#define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\
- "1920k(u-boot),128k(u-boot-env),"\
+ "1920k(u-boot),256k(u-boot-env),"\
"4m(kernel),-(fs)"
#define CONFIG_CMD_I2C /* I2C serial bus support */
@@ -182,14 +182,6 @@
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
/* devices */
-#define CONFIG_JFFS2_NAND
-/* nand device jffs2 lives on */
-#define CONFIG_JFFS2_DEV "nand0"
-/* start of jffs2 partition */
-#define CONFIG_JFFS2_PART_OFFSET 0x680000
-#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */
- /* partition */
-
/* Environment information */
#define CONFIG_BOOTDELAY 10
#define CONFIG_ZERO_BOOTDELAY_CHECK
@@ -204,9 +196,9 @@
"defaultdisplay=dvi\0" \
"mmcdev=0\0" \
"mmcroot=/dev/mmcblk0p2 rw\0" \
- "mmcrootfstype=ext3 rootwait\0" \
+ "mmcrootfstype=ext4 rootwait\0" \
"nandroot=/dev/mtdblock4 rw\0" \
- "nandrootfstype=jffs2\0" \
+ "nandrootfstype=ubifs\0" \
"mmcargs=setenv bootargs console=${console} " \
"mpurate=${mpurate} " \
"vram=${vram} " \
@@ -232,7 +224,7 @@
"bootm ${loadaddr}\0" \
"nandboot=echo Booting from nand ...; " \
"run nandargs; " \
- "nand read ${loadaddr} 280000 400000; " \
+ "nand read ${loadaddr} 2a0000 400000; " \
"bootm ${loadaddr}\0" \
#define CONFIG_BOOTCOMMAND \
diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h
index be04a75..2fefdc8 100644
--- a/include/configs/coreboot.h
+++ b/include/configs/coreboot.h
@@ -90,7 +90,8 @@
#endif
/* Generic TPM interfaced through LPC bus */
-#define CONFIG_GENERIC_LPC_TPM
+#define CONFIG_TPM
+#define CONFIG_TPM_TIS_LPC
#define CONFIG_TPM_TIS_BASE_ADDRESS 0xfed40000
/*-----------------------------------------------------------------------
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index 5cc9b5a..66c7b4f 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -38,6 +38,8 @@
#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p4080ds.cfg
#elif defined(CONFIG_P5020DS)
#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p5020ds.cfg
+#elif defined(CONFIG_P5040DS)
+#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p5040ds.cfg
#endif
#endif
@@ -562,6 +564,7 @@
#endif
#ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_E1000
diff --git a/include/configs/csb272.h b/include/configs/csb272.h
index f21fa64..eec087c 100644
--- a/include/configs/csb272.h
+++ b/include/configs/csb272.h
@@ -204,6 +204,7 @@
*
*/
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
#define PCI_HOST_FORCE 1 /* configure as pci host */
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
diff --git a/include/configs/csb472.h b/include/configs/csb472.h
index aed5fa6..f6a456c 100644
--- a/include/configs/csb472.h
+++ b/include/configs/csb472.h
@@ -203,6 +203,7 @@
*
*/
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
#define PCI_HOST_FORCE 1 /* configure as pci host */
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h
index f7ac256..00e92a6 100644
--- a/include/configs/da830evm.h
+++ b/include/configs/da830evm.h
@@ -36,6 +36,7 @@
#define CONFIG_MACH_DAVINCI_DA830_EVM
#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */
+#define CONFIG_SOC_DA830 /* TI DA830 SoC */
#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID)
#define CONFIG_SYS_OSCIN_FREQ 24000000
#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
@@ -109,8 +110,8 @@
#define CONFIG_SYS_NAND_CS 3
#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
#define CONFIG_SYS_NAND_PAGE_2K
-#define CONFIG_SYS_CLE_MASK 0x10
-#define CONFIG_SYS_ALE_MASK 0x8
+#define CONFIG_SYS_NAND_MASK_CLE 0x10
+#define CONFIG_SYS_NAND_MASK_ALE 0x8
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#endif
@@ -226,6 +227,28 @@
#define CONFIG_CMD_SAVEENV
#endif
+/* SD/MMC configuration */
+#ifndef CONFIG_USE_NAND
+#define CONFIG_MMC
+#define CONFIG_DAVINCI_MMC_SD1
+#define CONFIG_GENERIC_MMC
+#define CONFIG_DAVINCI_MMC
+#endif
+
+/*
+ * Enable MMC commands only when
+ * MMC support is present
+ */
+#if defined(CONFIG_MMC) || defined(CONFIG_USB_DA8XX)
+#define CONFIG_DOS_PARTITION /* include support for FAT/storage */
+#define CONFIG_CMD_FAT /* include support for FAT cmd */
+#endif
+
+#ifdef CONFIG_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_EXT2
+#endif
+
#if !defined(CONFIG_USE_NAND) && \
!defined(CONFIG_USE_NOR) && \
!defined(CONFIG_USE_SPIFLASH)
@@ -244,8 +267,6 @@
#define CONFIG_USB_STORAGE /* MSC class support */
#define CONFIG_CMD_STORAGE /* inclue support for usb-storage cmd */
-#define CONFIG_CMD_FAT /* inclue support for FAT/storage */
-#define CONFIG_DOS_PARTITION /* inclue support for FAT/storage */
#ifdef CONFIG_USB_KEYBOARD /* HID class support */
#define CONFIG_SYS_USB_EVENT_POLL
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index 583568d..c420967 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -199,8 +199,8 @@
#define CONFIG_SYS_NAND_PAGE_2K
#define CONFIG_SYS_NAND_CS 3
#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
-#define CONFIG_SYS_CLE_MASK 0x10
-#define CONFIG_SYS_ALE_MASK 0x8
+#define CONFIG_SYS_NAND_MASK_CLE 0x10
+#define CONFIG_SYS_NAND_MASK_ALE 0x8
#undef CONFIG_SYS_NAND_HW_ECC
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
diff --git a/include/configs/debris.h b/include/configs/debris.h
index 32aa4e5..c40fbd9 100644
--- a/include/configs/debris.h
+++ b/include/configs/debris.h
@@ -172,6 +172,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_PNP
#define CONFIG_EEPRO100
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 788227d..3b74d7c 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -360,6 +360,14 @@
#define CONFIG_CMD_SPL_NAND_OFS (CONFIG_SYS_NAND_SPL_KERNEL_OFFS+\
0x400000)
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
+
+#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME "uImage"
+#define CONFIG_SPL_FAT_LOAD_ARGS_NAME "args"
+
+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x500 /* address 0xa0000 */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x8 /* address 0x1000 */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 8 /* 4KB */
+
#define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_SDRAM_1 + 0x100)
#endif /* __CONFIG_H */
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 28a306b..0eea28c 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -28,11 +28,17 @@
#ifndef __CONFIG_DRA7XX_EVM_H
#define __CONFIG_DRA7XX_EVM_H
+/* High Level Configuration Options */
+#define CONFIG_DRA7XX /* in a TI DRA7XX core */
#define CONFIG_ENV_IS_NOWHERE /* For now. */
#include <configs/omap5_common.h>
-#define CONFIG_DRA7XX /* in a TI DRA7XX core */
#define CONFIG_SYS_PROMPT "DRA752 EVM # "
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_NS16550_COM1 UART1_BASE
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_SYS_OMAP_ABE_SYSCK
#endif /* __CONFIG_DRA7XX_EVM_H */
diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h
index 3238ac7..a6a0f8b 100644
--- a/include/configs/eXalion.h
+++ b/include/configs/eXalion.h
@@ -180,6 +180,7 @@
* PCI stuff
*/
#define CONFIG_PCI 1 /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */
#undef CONFIG_PCI_PNP
diff --git a/include/configs/ebony.h b/include/configs/ebony.h
index d6b6551..b05ba08 100644
--- a/include/configs/ebony.h
+++ b/include/configs/ebony.h
@@ -177,6 +177,7 @@
*/
/* General PCI */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h
index 2d63b67..97bc972 100644
--- a/include/configs/enbw_cmc.h
+++ b/include/configs/enbw_cmc.h
@@ -118,8 +118,8 @@
#define CONFIG_SYS_NAND_PAGE_2K
#define CONFIG_SYS_NAND_CS 3
#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
-#define CONFIG_SYS_CLE_MASK 0x10
-#define CONFIG_SYS_ALE_MASK 0x8
+#define CONFIG_SYS_NAND_MASK_CLE 0x10
+#define CONFIG_SYS_NAND_MASK_ALE 0x8
#undef CONFIG_SYS_NAND_HW_ECC
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h
index 8d78921..7393f28 100644
--- a/include/configs/ep82xxm.h
+++ b/include/configs/ep82xxm.h
@@ -254,6 +254,7 @@
*/
/* General PCI */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CONFIG_PCI_BOOTDELAY 0
diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h
index 8a82892..41d6cf9 100644
--- a/include/configs/exynos5250-dt.h
+++ b/include/configs/exynos5250-dt.h
@@ -142,9 +142,9 @@
/* TPM */
#define CONFIG_TPM
#define CONFIG_CMD_TPM
-#define CONFIG_INFINEON_TPM_I2C
-#define CONFIG_INFINEON_TPM_I2C_BUS 3
-#define CONFIG_INFINEON_TPM_I2C_ADDR 0x20
+#define CONFIG_TPM_TIS_I2C
+#define CONFIG_TPM_TIS_I2C_BUS_NUMBER 3
+#define CONFIG_TPM_TIS_I2C_SLAVE_ADDR 0x20
/* MMC SPL */
#define CONFIG_SPL
diff --git a/include/configs/gdppc440etx.h b/include/configs/gdppc440etx.h
index 9efbb8e..7b8bac4 100644
--- a/include/configs/gdppc440etx.h
+++ b/include/configs/gdppc440etx.h
@@ -178,6 +178,7 @@
/* General PCI */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup*/
#define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to \
diff --git a/include/configs/goflexhome.h b/include/configs/goflexhome.h
new file mode 100644
index 0000000..e776514
--- /dev/null
+++ b/include/configs/goflexhome.h
@@ -0,0 +1,151 @@
+/*
+ * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com>
+ *
+ * Based on dockstar.h originally written by
+ * Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu>
+ *
+ * Based on sheevaplug.h originally written by
+ * Prafulla Wadaskar <prafulla@marvell.com>
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef _CONFIG_GOFLEXHOME_H
+#define _CONFIG_GOFLEXHOME_H
+
+/*
+ * Version number information
+ */
+#define CONFIG_IDENT_STRING "\nSeagate GoFlex Home"
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
+#define CONFIG_KIRKWOOD 1 /* SOC Family Name */
+#define CONFIG_KW88F6281 1 /* SOC Name */
+#define CONFIG_MACH_GOFLEXHOME /* Machine type */
+#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
+
+/*
+ * Default GPIO configuration and LED status
+ */
+#define GOFLEXHOME_OE_LOW (~(0))
+#define GOFLEXHOME_OE_HIGH (~(0))
+#define GOFLEXHOME_OE_VAL_LOW (1 << 29) /* USB_PWEN low */
+#define GOFLEXHOME_OE_VAL_HIGH (1 << 17) /* LED pin high */
+
+/* PHY related */
+#define MV88E1116_LED_FCTRL_REG 10
+#define MV88E1116_CPRSP_CR3_REG 21
+#define MV88E1116_MAC_CTRL_REG 21
+#define MV88E1116_PGADR_REG 22
+#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
+#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
+
+/*
+ * Commands configuration
+ */
+#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+#include <config_cmd_default.h>
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_EXT4
+#define CONFIG_SYS_MVFS /* Picks up Filesystem from mv-common.h */
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+
+#undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */
+#define CONFIG_SYS_PROMPT "GoFlexHome> " /* Command Prompt */
+
+/*
+ * Environment variables configurations
+ */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_ENV_IS_IN_NAND 1
+#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
+#else
+#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
+#endif
+/*
+ * max 4k env size is enough, but in case of nand
+ * it has to be rounded to sector size
+ */
+#define CONFIG_ENV_SIZE 0x20000 /* 128k */
+#define CONFIG_ENV_ADDR 0xC0000
+#define CONFIG_ENV_OFFSET 0xC0000 /* env starts here */
+
+/*
+ * Default environment variables
+ */
+#define CONFIG_BOOTCOMMAND \
+ "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
+ "ubi part root; " \
+ "ubifsmount ubi:root; " \
+ "ubifsload 0x800000 ${kernel}; " \
+ "bootm 0x800000"
+
+#define CONFIG_MTDPARTS \
+ "mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "console=console=ttyS0,115200\0" \
+ "mtdids=nand0=orion_nand\0" \
+ "mtdparts="CONFIG_MTDPARTS \
+ "kernel=/boot/uImage\0" \
+ "bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0"
+
+/*
+ * Ethernet Driver configuration
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
+#define CONFIG_PHY_BASE_ADR 0
+#endif /* CONFIG_CMD_NET */
+
+/*
+ * * SATA Driver configuration
+ * */
+#ifdef CONFIG_MVSATA_IDE
+#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
+#endif /*CONFIG_MVSATA_IDE*/
+
+/*
+ * * RTC driver configuration
+ * */
+#ifdef CONFIG_CMD_DATE
+#define CONFIG_RTC_MV
+#endif /* CONFIG_CMD_DATE */
+
+#endif /* _CONFIG_GOFLEXHOME_H */
diff --git a/include/configs/icon.h b/include/configs/icon.h
index 2fac0ef..c2da4ce 100644
--- a/include/configs/icon.h
+++ b/include/configs/icon.h
@@ -234,6 +234,7 @@
*/
/* General PCI */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CONFIG_PCI_CONFIG_HOST_BRIDGE
diff --git a/include/configs/igep0033.h b/include/configs/igep0033.h
new file mode 100644
index 0000000..12f28f8
--- /dev/null
+++ b/include/configs/igep0033.h
@@ -0,0 +1,293 @@
+/*
+ * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __CONFIG_IGEP0033_H
+#define __CONFIG_IGEP0033_H
+
+#define CONFIG_AM33XX
+#define CONFIG_OMAP
+
+#include <asm/arch/omap.h>
+
+/* Mach type */
+#define MACH_TYPE_IGEP0033 4521 /* Until the next sync */
+#define CONFIG_MACH_TYPE MACH_TYPE_IGEP0033
+
+/* Clock defines */
+#define V_OSCK 24000000 /* Clock output from T2 */
+#define V_SCLK (V_OSCK)
+
+/* DMA defines */
+#define CONFIG_DMA_COHERENT
+#define CONFIG_DMA_COHERENT_SIZE (1 << 20)
+
+#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
+#define CONFIG_SYS_MALLOC_LEN (1024 << 10)
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT "U-Boot# "
+#define CONFIG_SYS_NO_FLASH
+
+/* Display cpuinfo */
+#define CONFIG_DISPLAY_CPUINFO
+
+/* Commands to include */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_FS_GENERIC
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+
+/*
+ * Because the issues explained in doc/README.memory-test, the "mtest command
+ * is considered deprecated. It should not be enabled in most normal ports of
+ * U-Boot.
+ */
+#undef CONFIG_CMD_MEMTEST
+
+#define CONFIG_BOOTDELAY 1 /* negative for no autoboot */
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "loadaddr=0x80200000\0" \
+ "rdaddr=0x81000000\0" \
+ "bootfile=/boot/uImage\0" \
+ "console=ttyO0,115200n8\0" \
+ "optargs=\0" \
+ "mmcdev=0\0" \
+ "mmcroot=/dev/mmcblk0p2 rw\0" \
+ "mmcrootfstype=ext4 rootwait\0" \
+ "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \
+ "ramrootfstype=ext2\0" \
+ "mmcargs=setenv bootargs console=${console} " \
+ "${optargs} " \
+ "root=${mmcroot} " \
+ "rootfstype=${mmcrootfstype}\0" \
+ "bootenv=uEnv.txt\0" \
+ "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
+ "importbootenv=echo Importing environment from mmc ...; " \
+ "env import -t $loadaddr $filesize\0" \
+ "ramargs=setenv bootargs console=${console} " \
+ "${optargs} " \
+ "root=${ramroot} " \
+ "rootfstype=${ramrootfstype}\0" \
+ "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
+ "loaduimagefat=load mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \
+ "loaduimage=load mmc ${mmcdev}:2 ${loadaddr} ${bootfile}\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "bootm ${loadaddr}\0" \
+ "ramboot=echo Booting from ramdisk ...; " \
+ "run ramargs; " \
+ "bootm ${loadaddr}\0" \
+
+#define CONFIG_BOOTCOMMAND \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
+ "echo SD/MMC found on device ${mmcdev};" \
+ "if run loadbootenv; then " \
+ "echo Loaded environment from ${bootenv};" \
+ "run importbootenv;" \
+ "fi;" \
+ "if test -n $uenvcmd; then " \
+ "echo Running uenvcmd ...;" \
+ "run uenvcmd;" \
+ "fi;" \
+ "if run loaduimage; then " \
+ "run mmcboot;" \
+ "fi;" \
+ "fi;" \
+
+/* Max number of command args */
+#define CONFIG_SYS_MAXARGS 16
+
+/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 512
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
+ + sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */
+#define CONFIG_SYS_HZ 1000 /* 1ms clock */
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
+#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */
+#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
+ GENERATED_GBL_DATA_SIZE)
+/* Platform/Board specific defs */
+#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
+#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ 1000
+
+/* NS16550 Configuration */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#define CONFIG_SYS_NS16550_CLK (48000000)
+#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */
+
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+
+/* CPU */
+#define CONFIG_ARCH_CPU_INIT
+
+#define CONFIG_ENV_OVERWRITE 1
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+
+/* MMC support */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_OMAP_HSMMC
+#define CONFIG_DOS_PARTITION
+
+/* GPIO support */
+#define CONFIG_OMAP_GPIO
+
+/* Ethernet support */
+#define CONFIG_DRIVER_TI_CPSW
+#define CONFIG_MII
+#define CONFIG_BOOTP_DEFAULT
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_NET_RETRY_COUNT 10
+#define CONFIG_NET_MULTI
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_ADDR 0
+#define CONFIG_PHY_SMSC
+
+/* NAND support */
+#define CONFIG_NAND
+#define CONFIG_NAND_OMAP_GPMC
+#define GPMC_NAND_ECC_LP_x16_LAYOUT 1
+#define CONFIG_SYS_NAND_BASE (0x08000000) /* phys address CS0 */
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_ONFI_DETECTION 1
+#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */
+
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+
+#define MTDIDS_DEFAULT "nand0=nand"
+#define MTDPARTS_DEFAULT "mtdparts=nand:512k(SPL),"\
+ "1m(U-Boot),128k(U-Boot Env),"\
+ "5m(Kernel),-(File System)"
+
+/* Unsupported features */
+#undef CONFIG_USE_IRQ
+
+/* Defines for SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+/*
+ * Place the image at the start of the ROM defined image space.
+ * We limit our size to the ROM-defined downloaded image area, and use the
+ * rest of the space for stack.
+ */
+#define CONFIG_SPL_TEXT_BASE 0x402F0400
+#define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE)
+#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
+
+#define CONFIG_SPL_BSS_START_ADDR 0x80000000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
+
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_YMODEM_SUPPORT
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
+
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SPL_NAND_AM33XX_BCH
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_ECC
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
+ CONFIG_SYS_NAND_PAGE_SIZE)
+#define CONFIG_SYS_NAND_PAGE_SIZE 2048
+#define CONFIG_SYS_NAND_OOBSIZE 64
+#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
+#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
+ 10, 11, 12, 13, 14, 15, 16, 17, \
+ 18, 19, 20, 21, 22, 23, 24, 25, \
+ 26, 27, 28, 29, 30, 31, 32, 33, \
+ 34, 35, 36, 37, 38, 39, 40, 41, \
+ 42, 43, 44, 45, 46, 47, 48, 49, \
+ 50, 51, 52, 53, 54, 55, 56, 57, }
+
+#define CONFIG_SYS_NAND_ECCSIZE 512
+#define CONFIG_SYS_NAND_ECCBYTES 14
+
+#define CONFIG_SYS_NAND_ECCSTEPS 4
+#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \
+ CONFIG_SYS_NAND_ECCSTEPS)
+
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
+
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
+
+/*
+ * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
+ * 64 bytes before this address should be set aside for u-boot.img's
+ * header. That is 0x800FFFC0--0x80100000 should not be used for any
+ * other needs.
+ */
+#define CONFIG_SYS_TEXT_BASE 0x80800000
+#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
+
+/*
+ * Since SPL did pll and ddr initialization for us,
+ * we don't need to do it twice.
+ */
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#endif
+
+#endif /* ! __CONFIG_IGEP0033_H */
diff --git a/include/configs/ima3-mx53.h b/include/configs/ima3-mx53.h
index c663700..327a866 100644
--- a/include/configs/ima3-mx53.h
+++ b/include/configs/ima3-mx53.h
@@ -26,7 +26,6 @@
/* SOC type must be included before imx-regs.h */
#define CONFIG_MX53
#include <asm/arch/imx-regs.h>
-#include <asm/arch/mx5x_pins.h>
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
@@ -79,8 +78,6 @@
/* SPI FLASH - not used for environment */
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_SPI_FLASH_CS (IOMUX_TO_GPIO(MX53_PIN_CSI0_D11) \
- << 8) | 0
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
#define CONFIG_SF_DEFAULT_SPEED 25000000
diff --git a/include/configs/intip.h b/include/configs/intip.h
index 33364a8..ed96b1b 100644
--- a/include/configs/intip.h
+++ b/include/configs/intip.h
@@ -316,6 +316,7 @@
*/
/* General PCI */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CONFIG_PCI_CONFIG_HOST_BRIDGE
diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index 3ed8dc7..c6f712c 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -238,6 +238,7 @@
*/
/* General PCI */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_PNP 1 /* do pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */
#define CONFIG_PCI_CONFIG_HOST_BRIDGE
diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h
index d505a41..aec4a58 100644
--- a/include/configs/kilauea.h
+++ b/include/configs/kilauea.h
@@ -483,6 +483,7 @@
* PCI stuff
*----------------------------------------------------------------------*/
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_PNP 1 /* do pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */
#define CONFIG_PCI_CONFIG_HOST_BRIDGE
diff --git a/include/configs/korat.h b/include/configs/korat.h
index b919aec..d7c1f85 100644
--- a/include/configs/korat.h
+++ b/include/configs/korat.h
@@ -355,6 +355,7 @@
*/
/* General PCI */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_SYS_PCI_CACHE_LINE_SIZE 0 /* to avoid problems with PNP */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
diff --git a/include/configs/kvme080.h b/include/configs/kvme080.h
index e49dc28..87a5056 100644
--- a/include/configs/kvme080.h
+++ b/include/configs/kvme080.h
@@ -169,6 +169,7 @@
#define CONFIG_SYS_NS16550_CLK 14745600
#define CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCI_PNP
#define CONFIG_EEPRO100
diff --git a/include/configs/linkstation.h b/include/configs/linkstation.h
index eec7961..20f0a18 100644
--- a/include/configs/linkstation.h
+++ b/include/configs/linkstation.h
@@ -185,6 +185,7 @@
* PCI stuff
*/
#define CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
/* Verified: CONFIG_PCI_PNP doesn't work */
#undef CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW
diff --git a/include/configs/lp8x4x.h b/include/configs/lp8x4x.h
new file mode 100644
index 0000000..026f321
--- /dev/null
+++ b/include/configs/lp8x4x.h
@@ -0,0 +1,262 @@
+/*
+ * ICP DAS LP-8x4x configuration file
+ *
+ * Copyright (C) 2013 Sergey Yanovich <ynvich@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Board Configuration Options
+ */
+#define CONFIG_CPU_PXA27X /* Marvell PXA270 CPU */
+#define MACH_TYPE_LP8X4X 4539 /* ICP DAS LP-8x4x */
+#define CONFIG_MACH_TYPE MACH_TYPE_LP8X4X
+#define CONFIG_SYS_TEXT_BASE 0x00000000
+
+#define CONFIG_SYS_MALLOC_LEN (128*1024)
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_BOOTCOMMAND \
+ "bootm 80000;"
+
+#define CONFIG_BOOTARGS \
+ "console=ttySA0,115200 mem=128M root=/dev/mmcblk0p1 rw" \
+ "init=/sbin/init rootfstype=ext3"
+
+#define CONFIG_TIMESTAMP
+#define CONFIG_BOOTDELAY 2 /* Autoboot delay */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_LZMA /* LZMA compression support */
+#undef CONFIG_OF_LIBFDT
+
+/*
+ * Serial Console Configuration
+ */
+#define CONFIG_PXA_SERIAL
+#define CONFIG_FFUART 1
+#define CONFIG_CONS_INDEX 3
+#define CONFIG_BAUDRATE 115200
+
+/*
+ * Bootloader Components Configuration
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_ENV
+#undef CONFIG_CMD_IMLS
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_USB
+#undef CONFIG_LCD
+#undef CONFIG_CMD_IDE
+
+/*
+ * Networking Configuration
+ * chip on the ICPDAS LINPAC board
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+
+#define CONFIG_DRIVER_DM9000 1
+#define CONFIG_DM9000_BASE 0x0C000000
+#define DM9000_IO 0x0C000000
+#define DM9000_DATA 0x0C004000
+#define DM9000_IO_2 0x0D000000
+#define DM9000_DATA_2 0x0D004000
+#define CONFIG_NET_RETRY_COUNT 10
+
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#endif
+
+/*
+ * MMC Card Configuration
+ */
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_PXA_MMC_GENERIC
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#define CONFIG_DOS_PARTITION
+#endif
+
+/*
+ * KGDB
+ */
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * HUSH Shell Configuration
+ */
+#define CONFIG_SYS_HUSH_PARSER 1
+
+#undef CONFIG_SYS_LONGHELP
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT "$ "
+#else
+#define CONFIG_SYS_PROMPT "=> "
+#endif
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_DEVICE_NULLDEV 1
+#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_AUTO_COMPLETE 1
+
+/*
+ * Clock Configuration
+ */
+#define CONFIG_SYS_HZ 1000 /* Timer @ 3250000 Hz */
+
+/*
+ * DRAM Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
+#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
+
+#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */
+#define CONFIG_SYS_DRAM_SIZE 0x08000000 /* 128 MB DRAM */
+
+#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
+
+#define CONFIG_SYS_LOAD_ADDR 0xa0008000
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+/* Use first 64kb bank of the internal SRAM */
+#define CONFIG_SYS_INIT_SP_ADDR 0x5c010000
+
+/*
+ * NOR FLASH
+ */
+#define CONFIG_SYS_MONITOR_BASE 0x0
+#define CONFIG_SYS_MONITOR_LEN 0x40000
+#define CONFIG_ENV_ADDR \
+ (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_ENV_SIZE 0x40000
+#define CONFIG_ENV_SECT_SIZE 0x40000
+
+#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
+#define PHYS_FLASH_2 0x02000000 /* Flash Bank #2 */
+
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER 1
+
+#define CONFIG_SYS_MAX_FLASH_SECT (4 + 255)
+#define CONFIG_SYS_MAX_FLASH_BANKS 2
+#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 }
+
+#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ)
+#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ)
+
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
+#define CONFIG_SYS_FLASH_PROTECTION 1
+
+#define CONFIG_ENV_IS_IN_FLASH 1
+
+/*
+ * GPIO settings
+ */
+#define CONFIG_SYS_GPSR0_VAL 0x0808c014
+#define CONFIG_SYS_GPSR1_VAL 0x00cf0002
+#define CONFIG_SYS_GPSR2_VAL 0x0221c000
+#define CONFIG_SYS_GPSR3_VAL 0x00020000
+
+#define CONFIG_SYS_GPCR0_VAL 0x00000000
+#define CONFIG_SYS_GPCR1_VAL 0x0000ab80
+#define CONFIG_SYS_GPCR2_VAL 0x00100000
+#define CONFIG_SYS_GPCR3_VAL 0x0
+
+#define CONFIG_SYS_GPDR0_VAL 0xc0e9ddf4
+#define CONFIG_SYS_GPDR1_VAL 0xfcffab83
+#define CONFIG_SYS_GPDR2_VAL 0x02f1ffff
+#define CONFIG_SYS_GPDR3_VAL 0x00021b81
+
+#define CONFIG_SYS_GAFR0_L_VAL 0x80000000
+#define CONFIG_SYS_GAFR0_U_VAL 0xa5e54018
+#define CONFIG_SYS_GAFR1_L_VAL 0x999a955a
+#define CONFIG_SYS_GAFR1_U_VAL 0xaaa5a00a
+#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa
+#define CONFIG_SYS_GAFR2_U_VAL 0x55f0a402
+#define CONFIG_SYS_GAFR3_L_VAL 0x540a950c
+#define CONFIG_SYS_GAFR3_U_VAL 0x00001599
+
+#define CONFIG_SYS_PSSR_VAL 0x32
+
+/*
+ * Clock settings
+ */
+#define CONFIG_SYS_CKEN 0x005002c0
+#define CONFIG_SYS_CCCR 0x02000290
+#define CONFIG_SYS_CLKCFG 0x0000000b
+
+/*
+ * Memory settings
+ */
+#define CONFIG_SYS_MSC0_VAL 0x2bd8aad2
+#define CONFIG_SYS_MSC1_VAL 0xb8c9b8dc
+#define CONFIG_SYS_MSC2_VAL 0xfff9b8c9
+#define CONFIG_SYS_FLYCNFG_VAL 0x00010001
+#define CONFIG_SYS_MDREFR_VAL 0x2093e018
+#define CONFIG_SYS_MDCNFG_VAL 0x890009d1
+#define CONFIG_SYS_MDMRS_VAL 0x00220022
+#define CONFIG_SYS_SXCNFG_VAL 0x40044004
+
+/*
+ * PCMCIA and CF Interfaces
+ */
+#define CONFIG_SYS_MECR_VAL 0x00000001
+#define CONFIG_SYS_MCMEM0_VAL 0x0000c497
+#define CONFIG_SYS_MCMEM1_VAL 0x0000c497
+#define CONFIG_SYS_MCATT0_VAL 0x0000c497
+#define CONFIG_SYS_MCATT1_VAL 0x0000c497
+#define CONFIG_SYS_MCIO0_VAL 0x00008407
+#define CONFIG_SYS_MCIO1_VAL 0x00008407
+
+/*
+ * LCD
+ */
+#ifdef CONFIG_LCD
+#define CONFIG_VOIPAC_LCD
+#endif
+
+/*
+ * USB
+ */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_BOARD_INIT
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4C000000
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "lp8x4x"
+#define CONFIG_USB_STORAGE
+#endif
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/luan.h b/include/configs/luan.h
index 3b4761b..f0e568a 100644
--- a/include/configs/luan.h
+++ b/include/configs/luan.h
@@ -178,6 +178,7 @@
/* General PCI */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_PNP /* do (not) pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index 4ce4058..5b3fa43 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -77,6 +77,7 @@
#define CONFIG_CMD_SF
#define CONFIG_CMD_SPI
#define CONFIG_CMD_USB
+#define CONFIG_VIDEO
#define CONFIG_REGEX /* Enable regular expression support */
@@ -271,6 +272,24 @@
#endif
/*
+ * LCD
+ */
+#ifdef CONFIG_VIDEO
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_MXS
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_CMD_BMP
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_VIDEO_BMP_GZIP
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (512 << 10)
+#endif
+
+/*
* Boot Linux
*/
#define CONFIG_CMDLINE_TAG
diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h
new file mode 100644
index 0000000..8403d51
--- /dev/null
+++ b/include/configs/m53evk.h
@@ -0,0 +1,256 @@
+/*
+ * DENX M53 configuration
+ * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __M53EVK_CONFIG_H__
+#define __M53EVK_CONFIG_H__
+
+#define CONFIG_MX53
+#define CONFIG_MXC_GPIO
+#define CONFIG_SYS_HZ 1000
+
+#include <asm/arch/imx-regs.h>
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_REVISION_TAG
+#define CONFIG_SYS_NO_FLASH
+
+/*
+ * U-Boot Commands
+ */
+#include <config_cmd_default.h>
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_DOS_PARTITION
+
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SATA
+#define CONFIG_CMD_USB
+
+/*
+ * Memory configurations
+ */
+#define CONFIG_NR_DRAM_BANKS 2
+#define PHYS_SDRAM_1 CSD0_BASE_ADDR
+#define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024)
+#define PHYS_SDRAM_2 CSD1_BASE_ADDR
+#define PHYS_SDRAM_2_SIZE (512 * 1024 * 1024)
+#define PHYS_SDRAM_SIZE (PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE)
+#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
+#define CONFIG_SYS_MEMTEST_START 0x70000000
+#define CONFIG_SYS_MEMTEST_END 0xaff00000
+
+#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1)
+#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR)
+#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE)
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+#define CONFIG_SYS_TEXT_BASE 0x71000000
+
+/*
+ * U-Boot general configurations
+ */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT "=> "
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+ /* Print buffer size */
+#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+ /* Boot argument buffer size */
+#define CONFIG_VERSION_VARIABLE /* U-BOOT version */
+#define CONFIG_AUTO_COMPLETE /* Command auto complete */
+#define CONFIG_CMDLINE_EDITING /* Command history etc */
+#define CONFIG_SYS_HUSH_PARSER
+
+/*
+ * Serial Driver
+ */
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE UART2_BASE
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+
+/*
+ * MMC Driver
+ */
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+#define CONFIG_SYS_FSL_ESDHC_NUM 1
+#endif
+
+/*
+ * NAND
+ */
+#define CONFIG_ENV_SIZE (16 * 1024)
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR_AXI
+#define CONFIG_NAND_MXC
+#define CONFIG_MXC_NAND_REGS_BASE NFC_BASE_ADDR_AXI
+#define CONFIG_MXC_NAND_IP_REGS_BASE NFC_BASE_ADDR
+#define CONFIG_SYS_NAND_LARGEPAGE
+#define CONFIG_MXC_NAND_HWECC
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
+
+/* Environment is in NAND */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
+#define CONFIG_ENV_SECT_SIZE (128 * 1024)
+#define CONFIG_ENV_RANGE (512 * 1024)
+#define CONFIG_ENV_OFFSET 0x100000
+#define CONFIG_ENV_OFFSET_REDUND \
+ (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
+
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define MTDIDS_DEFAULT "nand0=mxc-nand"
+#define MTDPARTS_DEFAULT \
+ "mtdparts=mxc-nand:" \
+ "1m(bootloader)ro," \
+ "512k(environment)," \
+ "512k(redundant-environment)," \
+ "4m(kernel)," \
+ "128k(fdt)," \
+ "8m(ramdisk)," \
+ "-(filesystem)"
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#endif
+
+/*
+ * Ethernet on SOC (FEC)
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_FEC_MXC
+#define IMX_FEC_BASE FEC_BASE_ADDR
+#define CONFIG_FEC_MXC_PHYADDR 0x0
+#define CONFIG_MII
+#define CONFIG_DISCOVER_PHY
+#define CONFIG_FEC_XCV_TYPE RMII
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MICREL
+#endif
+
+/*
+ * I2C
+ */
+#ifdef CONFIG_CMD_I2C
+#define CONFIG_HARD_I2C
+#define CONFIG_I2C_MXC
+#define CONFIG_SYS_I2C_BASE I2C2_BASE_ADDR
+#define CONFIG_SYS_I2C_SPEED 100000
+#endif
+
+/*
+ * RTC
+ */
+#ifdef CONFIG_CMD_DATE
+#define CONFIG_RTC_M41T62
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68
+#define CONFIG_SYS_M41T11_BASE_YEAR 2000
+#endif
+
+/*
+ * USB
+ */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX5
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_USB_ETHER_SMSC95XX
+#define CONFIG_MXC_USB_PORT 1
+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS 0
+#endif
+
+/*
+ * SATA
+ */
+#ifdef CONFIG_CMD_SATA
+#define CONFIG_DWC_AHSATA
+#define CONFIG_SYS_SATA_MAX_DEVICE 1
+#define CONFIG_DWC_AHSATA_PORT_ID 0
+#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_BASE_ADDR
+#define CONFIG_LBA48
+#define CONFIG_LIBATA
+#endif
+
+/*
+ * Boot Linux
+ */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTFILE "m53evk/uImage"
+#define CONFIG_BOOTARGS "console=ttymxc1,115200"
+#define CONFIG_LOADADDR 0x70800000
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+#define CONFIG_OF_LIBFDT
+
+/*
+ * NAND SPL
+ */
+#define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TARGET "u-boot-with-nand-spl.imx"
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SPL_TEXT_BASE 0x70008000
+#define CONFIG_SPL_PAD_TO 0x8000
+#define CONFIG_SPL_STACK 0x70004000
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+
+#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO
+#define CONFIG_SYS_NAND_PAGE_SIZE 2048
+#define CONFIG_SYS_NAND_OOBSIZE 64
+#define CONFIG_SYS_NAND_PAGE_COUNT 64
+#define CONFIG_SYS_NAND_SIZE (256 * 1024 * 1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
+
+#endif /* __M53EVK_CONFIG_H__ */
diff --git a/include/configs/makalu.h b/include/configs/makalu.h
index 6c1b136..f71f28b 100644
--- a/include/configs/makalu.h
+++ b/include/configs/makalu.h
@@ -276,6 +276,7 @@
* PCI stuff
*----------------------------------------------------------------------*/
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_PNP 1 /* do pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */
#define CONFIG_PCI_CONFIG_HOST_BRIDGE
diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h
index af30257..c4f245b 100644
--- a/include/configs/mecp5123.h
+++ b/include/configs/mecp5123.h
@@ -275,7 +275,7 @@
/*
* IIM - IC Identification Module
*/
-#undef CONFIG_IIM
+#undef CONFIG_FSL_IIM
/*
* EEPROM configuration
diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h
index 6e6af62..6f003aa 100644
--- a/include/configs/mpc5121ads.h
+++ b/include/configs/mpc5121ads.h
@@ -336,6 +336,7 @@
* PCI
*/
#ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
/*
* General PCI
@@ -370,7 +371,7 @@
/*
* IIM - IC Identification Module
*/
-#undef CONFIG_IIM
+#undef CONFIG_FSL_IIM
/*
* EEPROM configuration
diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h
index aa681f0..3c7a85e 100644
--- a/include/configs/mpc8308_p1m.h
+++ b/include/configs/mpc8308_p1m.h
@@ -353,6 +353,7 @@
#define CONFIG_SYS_SCCR_PCIEXP1CM 1
#define CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCIE
#define CONFIG_PCI_PNP /* do pci plug-and-play */
diff --git a/include/configs/mx23evk.h b/include/configs/mx23evk.h
index e5a15a4..3a58afe 100644
--- a/include/configs/mx23evk.h
+++ b/include/configs/mx23evk.h
@@ -60,6 +60,7 @@
#define CONFIG_CMD_MMC
#define CONFIG_CMD_USB
#define CONFIG_CMD_BOOTZ
+#define CONFIG_VIDEO
/* Memory configurations */
#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
@@ -133,6 +134,22 @@
#define CONFIG_USB_STORAGE
#endif
+/* Framebuffer support */
+#ifdef CONFIG_VIDEO
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_MXS
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_CMD_BMP
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_VIDEO_BMP_GZIP
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (512 << 10)
+#endif
+
/* Boot Linux */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
index 3747955..de69182 100644
--- a/include/configs/mx28evk.h
+++ b/include/configs/mx28evk.h
@@ -63,6 +63,8 @@
#define CONFIG_CMD_USB
#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NAND_TRIMFFS
+#define CONFIG_VIDEO
/* Memory configurations */
#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
@@ -234,6 +236,22 @@
#endif
#endif
+/* Framebuffer support */
+#ifdef CONFIG_VIDEO
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_MXS
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_CMD_BMP
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_VIDEO_BMP_GZIP
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (512 << 10)
+#endif
+
/* Boot Linux */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index cb3d938..13d1839 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -53,6 +53,9 @@
/*
* Hardware drivers
*/
+#define CONFIG_FSL_IIM
+#define CONFIG_CMD_FUSE
+
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_MXC_GPIO
@@ -149,32 +152,66 @@
#define CONFIG_ETHPRIME "FEC0"
-#define CONFIG_LOADADDR 0x90800000 /* loadaddr env var */
+#define CONFIG_LOADADDR 0x92000000 /* loadaddr env var */
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"uimage=uImage\0" \
+ "fdt_file=imx51-babbage.dtb\0" \
+ "fdt_addr=0x91000000\0" \
+ "boot_fdt=try\0" \
+ "ip_dyn=yes\0" \
"mmcdev=0\0" \
"mmcpart=2\0" \
- "mmcroot=/dev/mmcblk0p3 rw\0" \
- "mmcrootfstype=ext3 rootwait\0" \
+ "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \
"mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \
- "root=${mmcroot} " \
- "rootfstype=${mmcrootfstype}\0" \
+ "root=${mmcroot}\0" \
"loadbootscript=" \
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
- "bootm\0" \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+ "if run loadfdt; then " \
+ "bootm ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootm; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootm; " \
+ "fi;\0" \
"netargs=setenv bootargs console=ttymxc0,${baudrate} " \
"root=/dev/nfs " \
"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
"netboot=echo Booting from net ...; " \
"run netargs; " \
- "dhcp ${uimage}; bootm\0" \
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "${get_cmd} ${uimage}; " \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+ "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+ "bootm ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootm; " \
+ "else " \
+ "echo ERROR: Cannot load the DT; " \
+ "exit; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootm; " \
+ "fi;\0"
#define CONFIG_BOOTCOMMAND \
"mmc dev ${mmcdev}; if mmc rescan; then " \
diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h
index 148f7a2..b0a965f 100644
--- a/include/configs/mx53ard.h
+++ b/include/configs/mx53ard.h
@@ -34,6 +34,7 @@
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
@@ -90,6 +91,7 @@
#include <config_cmd_default.h>
#undef CONFIG_CMD_IMLS
+#define CONFIG_CMD_SETEXPR
#define CONFIG_BOOTDELAY 3
@@ -100,45 +102,98 @@
#define CONFIG_SMC911X_16_BIT
#define CONFIG_SMC911X_BASE CS1_BASE_ADDR
-#define CONFIG_LOADADDR 0x70800000 /* loadaddr env var */
+#define CONFIG_LOADADDR 0x72000000 /* loadaddr env var */
#define CONFIG_SYS_TEXT_BASE 0x77800000
+#define CONFIG_DEFAULT_FDT_FILE "imx53-ard.dtb"
+
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"uimage=uImage\0" \
- "mmcdev=0\0" \
+ "console=ttymxc0\0" \
+ "fdt_high=0xffffffff\0" \
+ "initrd_high=0xffffffff\0" \
+ "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
+ "fdt_addr=0x71000000\0" \
+ "boot_fdt=try\0" \
+ "ip_dyn=yes\0" \
+ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
"mmcpart=2\0" \
- "mmcroot=/dev/mmcblk0p3 rw\0" \
- "mmcrootfstype=ext3 rootwait\0" \
- "mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \
- "root=${mmcroot} " \
- "rootfstype=${mmcrootfstype}\0" \
+ "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \
+ "update_sd_firmware_filename=u-boot.imx\0" \
+ "update_sd_firmware=" \
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "if mmc dev ${mmcdev}; then " \
+ "if ${get_cmd} ${update_sd_firmware_filename}; then " \
+ "setexpr fw_sz ${filesize} / 0x200; " \
+ "setexpr fw_sz ${fw_sz} + 1; " \
+ "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
+ "fi; " \
+ "fi\0" \
+ "mmcargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${mmcroot}\0" \
"loadbootscript=" \
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
- "bootm\0" \
- "netargs=setenv bootargs console=ttymxc0,${baudrate} " \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+ "if run loadfdt; then " \
+ "bootm ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootm; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootm; " \
+ "fi;\0" \
+ "netargs=setenv bootargs console=${console},${baudrate} " \
"root=/dev/nfs " \
- "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
- "netboot=echo Booting from net ...; " \
+ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+ "netboot=echo Booting from net ...; " \
"run netargs; " \
- "dhcp ${uimage}; bootm\0" \
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "${get_cmd} ${uimage}; " \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+ "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+ "bootm ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootm; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootm; " \
+ "fi;\0"
#define CONFIG_BOOTCOMMAND \
- "mmc dev ${mmcdev}; if mmc rescan; then " \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "else " \
- "if run loaduimage; then " \
- "run mmcboot; " \
- "else run netboot; " \
- "fi; " \
- "fi; " \
- "else run netboot; fi"
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loaduimage; then " \
+ "run mmcboot; " \
+ "else run netboot; " \
+ "fi; " \
+ "fi; " \
+ "else run netboot; fi"
+
#define CONFIG_ARP_TIMEOUT 200UL
/* Miscellaneous configurable options */
diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h
index a0af3ee..822b926 100644
--- a/include/configs/mx53evk.h
+++ b/include/configs/mx53evk.h
@@ -34,6 +34,7 @@
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
#define CONFIG_OF_LIBFDT
diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h
index 9e83319..942949d 100644
--- a/include/configs/mx53smd.h
+++ b/include/configs/mx53smd.h
@@ -34,6 +34,7 @@
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h
index b333937..674bcd3 100644
--- a/include/configs/mx6_common.h
+++ b/include/configs/mx6_common.h
@@ -17,6 +17,7 @@
#ifndef __MX6_COMMON_H
#define __MX6_COMMON_H
+#define CONFIG_ARM_ERRATA_742230
#define CONFIG_ARM_ERRATA_743622
#define CONFIG_ARM_ERRATA_751472
diff --git a/include/configs/mx6qsabre_common.h b/include/configs/mx6qsabre_common.h
index f5f115f..bfaa420 100644
--- a/include/configs/mx6qsabre_common.h
+++ b/include/configs/mx6qsabre_common.h
@@ -78,6 +78,7 @@
#define CONFIG_CMD_BMODE
#define CONFIG_CMD_BOOTZ
+#define CONFIG_CMD_SETEXPR
#undef CONFIG_CMD_IMLS
#define CONFIG_BOOTDELAY 1
@@ -96,8 +97,21 @@
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
- "mmcpart=" __stringify(CONFIG_SYS_MMC_ENV_PART) "\0" \
+ "mmcpart=1\0" \
"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+ "update_sd_firmware=" \
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "if mmc dev ${mmcdev}; then " \
+ "if ${get_cmd} ${update_sd_firmware_filename}; then " \
+ "setexpr fw_sz ${filesize} / 0x200; " \
+ "setexpr fw_sz ${fw_sz} + 1; " \
+ "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
+ "fi; " \
+ "fi\0" \
"mmcargs=setenv bootargs console=${console},${baudrate} " \
"root=${mmcroot}\0" \
"loadbootscript=" \
diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h
index 1583c11..76f7812 100644
--- a/include/configs/mx6qsabreauto.h
+++ b/include/configs/mx6qsabreauto.h
@@ -35,7 +35,12 @@
#define CONFIG_SYS_FSL_USDHC_NUM 2
#if defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_SYS_MMC_ENV_DEV 0
-#define CONFIG_SYS_MMC_ENV_PART 1 /* Boot partition 1 */
#endif
+/* I2C Configs */
+#define CONFIG_CMD_I2C
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_MXC
+#define CONFIG_SYS_I2C_SPEED 100000
+
#endif /* __MX6QSABREAUTO_CONFIG_H */
diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
index 6d4b837..b814418 100644
--- a/include/configs/mx6qsabrelite.h
+++ b/include/configs/mx6qsabrelite.h
@@ -47,6 +47,11 @@
#define CONFIG_MISC_INIT_R
#define CONFIG_MXC_GPIO
+#define CONFIG_CMD_FUSE
+#ifdef CONFIG_CMD_FUSE
+#define CONFIG_MXC_OCOTP
+#endif
+
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART2_BASE
diff --git a/include/configs/mx6qsabresd.h b/include/configs/mx6qsabresd.h
index 3b8d752..44f07cb 100644
--- a/include/configs/mx6qsabresd.h
+++ b/include/configs/mx6qsabresd.h
@@ -29,7 +29,6 @@
#define CONFIG_SYS_FSL_USDHC_NUM 3
#if defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_SYS_MMC_ENV_DEV 1 /* SDHC3 */
-#define CONFIG_SYS_MMC_ENV_PART 1 /* Boot partition 1 */
#endif
#endif /* __MX6QSABRESD_CONFIG_H */
diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
new file mode 100644
index 0000000..19dcdd6
--- /dev/null
+++ b/include/configs/mx6slevk.h
@@ -0,0 +1,189 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the Freescale i.MX6SL EVK board.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/imx-regs.h>
+#include <asm/sizes.h>
+
+#define CONFIG_MX6
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define MACH_TYPE_MX6SLEVK 4307
+#define CONFIG_MACH_TYPE MACH_TYPE_MX6SLEVK
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M)
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_MXC_GPIO
+
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR
+
+/* MMC Configs */
+#define CONFIG_FSL_ESDHC
+#define CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+
+#define CONFIG_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+
+/* Command definition */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_BOOTDELAY 3
+
+#define CONFIG_LOADADDR 0x82000000
+#define CONFIG_SYS_TEXT_BASE 0x87800000
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "script=boot.scr\0" \
+ "uimage=uImage\0" \
+ "console=ttymxc0\0" \
+ "fdt_high=0xffffffff\0" \
+ "initrd_high=0xffffffff\0" \
+ "fdt_file=imx6sl-evk.dtb\0" \
+ "fdt_addr=0x81000000\0" \
+ "boot_fdt=try\0" \
+ "ip_dyn=yes\0" \
+ "mmcdev=0\0" \
+ "mmcpart=2\0" \
+ "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \
+ "mmcargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${mmcroot}\0" \
+ "loadbootscript=" \
+ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+ "bootscript=echo Running bootscript from mmc ...; " \
+ "source\0" \
+ "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+ "if run loadfdt; then " \
+ "bootm ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootm; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootm; " \
+ "fi;\0" \
+ "netargs=setenv bootargs console=${console},${baudrate} " \
+ "root=/dev/nfs " \
+ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+ "netboot=echo Booting from net ...; " \
+ "run netargs; " \
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "${get_cmd} ${uimage}; " \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+ "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+ "bootm ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootm; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootm; " \
+ "fi;\0"
+
+#define CONFIG_BOOTCOMMAND \
+ "mmc dev ${mmcdev};" \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loaduimage; then " \
+ "run mmcboot; " \
+ "else run netboot; " \
+ "fi; " \
+ "fi; " \
+ "else run netboot; fi"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT "=> "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE 256
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_MEMTEST_START 0x80000000
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + SZ_512M)
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_STACKSIZE SZ_128K
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
+#define PHYS_SDRAM_SIZE SZ_1G
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ENV_OFFSET (6 * SZ_64K)
+#define CONFIG_ENV_SIZE SZ_8K
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_CMD_BOOTZ
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+#define CONFIG_CMD_CACHE
+#endif
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
index 93e7fe4..aea91bc 100644
--- a/include/configs/nitrogen6x.h
+++ b/include/configs/nitrogen6x.h
@@ -44,6 +44,11 @@
#define CONFIG_MISC_INIT_R
#define CONFIG_MXC_GPIO
+#define CONFIG_CMD_FUSE
+#ifdef CONFIG_CMD_FUSE
+#define CONFIG_MXC_OCOTP
+#endif
+
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART2_BASE
diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h
index d0fe9da..3e64c74 100644
--- a/include/configs/ocotea.h
+++ b/include/configs/ocotea.h
@@ -197,6 +197,7 @@
*/
/* General PCI */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h
deleted file mode 100644
index 04e8d3a..0000000
--- a/include/configs/omap2420h4.h
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments.
- * Richard Woodruff <r-woodruff2@ti.com>
- * Kshitij Gupta <kshitij@ti.com>
- *
- * Configuration settings for the 242x TI H4 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */
-#define CONFIG_OMAP 1 /* in a TI OMAP core */
-#define CONFIG_OMAP2420 1 /* which is in a 2420 */
-#define CONFIG_OMAP2420H4 1 /* and on a H4 board */
-/*#define CONFIG_APTIX 1 #* define if on APTIX test chip */
-/*#define CONFIG_VIRTIO 1 #* Using Virtio simulator */
-
-#define CONFIG_STANDALONE_LOAD_ADDR 0x80300000
-
-/* Clock config to target*/
-#define PRCM_CONFIG_II 1
-/* #define PRCM_CONFIG_III 1 */
-
-#include <asm/arch/omap2420.h> /* get chip and board defs */
-
-/* On H4, NOR and NAND flash are mutual exclusive.
- Define this if you want to use NAND
- */
-/*#define CONFIG_SYS_NAND_BOOT */
-
-#ifdef CONFIG_APTIX
-#define V_SCLK 1500000
-#else
-#define V_SCLK 12000000
-#endif
-
-/* input clock of PLL */
-/* the OMAP2420 H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */
-#define CONFIG_SYS_CLK_FREQ V_SCLK
-
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-#define CONFIG_REVISION_TAG 1
-#define CONFIG_OF_LIBFDT
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_ENV_SIZE SZ_128K /* Total Size of Environment Sector */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K)
-
-/*
- * Hardware drivers
- */
-
-/*
- * SMC91c96 Etherent
- */
-#define CONFIG_LAN91C96
-#define CONFIG_LAN91C96_BASE (H4_CS1_BASE+0x300)
-#define CONFIG_LAN91C96_EXT_PHY
-
-/*
- * NS16550 Configuration
- */
-#ifdef CONFIG_APTIX
-#define V_NS16550_CLK (6000000) /* 6MHz in current MaxSet */
-#else
-#define V_NS16550_CLK (48000000) /* 48MHz (APLL96/2) */
-#endif
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK /* 3MHz (1.5MHz*2) */
-#define CONFIG_SYS_NS16550_COM1 OMAP2420_UART1
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SERIAL1 1 /* UART1 on H4 */
-
- /*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP24XX_I2C
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#ifdef CONFIG_SYS_NAND_BOOT
- #define CONFIG_CMD_DHCP
- #define CONFIG_CMD_I2C
- #define CONFIG_CMD_NAND
- #define CONFIG_CMD_JFFS2
-#else
- #define CONFIG_CMD_DHCP
- #define CONFIG_CMD_I2C
- #define CONFIG_CMD_JFFS2
-
- #undef CONFIG_CMD_SOURCE
-#endif
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-
-#define CONFIG_BOOTDELAY 3
-
-#ifdef NFS_BOOT_DEFAULTS
-#define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200n8 noinitrd root=/dev/nfs rw nfsroot=128.247.77.158:/home/a0384864/wtbu/rootfs ip=dhcp"
-#else
-#define CONFIG_BOOTARGS "root=/dev/ram0 rw mem=32M console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
-#endif
-
-#define CONFIG_NETMASK 255.255.254.0
-#define CONFIG_IPADDR 128.247.77.90
-#define CONFIG_SERVERIP 128.247.77.158
-#define CONFIG_BOOTFILE "uImage"
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#ifdef CONFIG_APTIX
-# define CONFIG_SYS_PROMPT "OMAP2420 Aptix # "
-#else
-# define CONFIG_SYS_PROMPT "OMAP242x H4 # "
-#endif
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START (OMAP2420_SDRC_CS0) /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END (OMAP2420_SDRC_CS0+SZ_31M)
-
-#define CONFIG_SYS_LOAD_ADDR (OMAP2420_SDRC_CS0) /* default load address */
-
-/* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by
- * 32KHz clk, or from external sig. This rate is divided by a local divisor.
- */
-#ifdef CONFIG_APTIX
-#define V_PTV 3
-#else
-#define V_PTV 7 /* use with 12MHz/128 */
-#endif
-
-#define CONFIG_SYS_TIMERBASE OMAP2420_GPT2
-#define CONFIG_SYS_PTV V_PTV /* 2^(PTV+1) */
-#define CONFIG_SYS_HZ 1000
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
-#define PHYS_SDRAM_1 OMAP2420_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */
-#define PHYS_SDRAM_2 OMAP2420_SDRC_CS1
-
-#define PHYS_FLASH_SECT_SIZE SZ_128K
-#define PHYS_FLASH_1 H4_CS0_BASE /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE_1 SZ_32M
-#define PHYS_FLASH_2 (H4_CS0_BASE+SZ_32M) /* same cs, 2 chips in series */
-#define PHYS_FLASH_SIZE_2 SZ_32M
-
-#define PHYS_SRAM 0x4020F800
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT (259) /* max number of sectors on one chip */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Monitor at beginning of flash */
-#define CONFIG_SYS_MONITOR_LEN SZ_128K /* Reserve 1 sector */
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SIZE_1 }
-
-#ifdef CONFIG_SYS_NAND_BOOT
-#define CONFIG_ENV_IS_IN_NAND 1
-#define CONFIG_ENV_OFFSET 0x80000 /* environment starts here */
-#else
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + SZ_256K)
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE
-#define CONFIG_ENV_OFFSET ( CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN ) /* Environment after Monitor */
-#endif
-
-/*-----------------------------------------------------------------------
- * CFI FLASH driver setup
- */
-#define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */
-#define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/mtd/cfi_flash.c */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */
-#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use hardware sector protection */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (100*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (100*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_SYS_JFFS2_MEM_NAND
-
-/*
- * JFFS2 partitions
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor1"
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET 0x00000000
-
-/* mtdparts command line support */
-/* Note: fake mtd_id used, no linux mtd map file */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT "nor1=omap2420-1"
-#define MTDPARTS_DEFAULT "mtdparts=omap2420-1:-(jffs2)"
-*/
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR PHYS_SRAM
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h
index 376a3d0..f9adc01 100644
--- a/include/configs/omap3_mvblx.h
+++ b/include/configs/omap3_mvblx.h
@@ -273,7 +273,7 @@
#endif /* (CONFIG_CMD_NET) */
#define CONFIG_FPGA_COUNT 1
-#define CONFIG_FPGA CONFIG_SYS_ALTERA_CYCLON2
+#define CONFIG_FPGA
#define CONFIG_FPGA_ALTERA
#define CONFIG_FPGA_CYCLON2
#define CONFIG_SYS_FPGA_PROG_FEEDBACK
diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
index 1fd3097..3e5d36b 100644
--- a/include/configs/omap4_common.h
+++ b/include/configs/omap4_common.h
@@ -45,10 +45,6 @@
#define CONFIG_DISPLAY_CPUINFO 1
#define CONFIG_DISPLAY_BOARDINFO 1
-/* Clock Defines */
-#define V_OSCK 38400000 /* Clock output from T2 */
-#define V_SCLK V_OSCK
-
#define CONFIG_MISC_INIT_R
#define CONFIG_OF_LIBFDT 1
@@ -87,6 +83,10 @@
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
115200}
+
+/* CPU */
+#define CONFIG_ARCH_CPU_INIT
+
/* I2C */
#define CONFIG_HARD_I2C 1
#define CONFIG_SYS_I2C_SPEED 100000
@@ -176,7 +176,9 @@
"if test $board_name = sdp4430; then " \
"setenv fdtfile omap4-sdp.dtb; fi; " \
"if test $board_name = panda; then " \
- "setenv fdtfile omap4-panda-es.dtb; fi\0" \
+ "setenv fdtfile omap4-panda.dtb; fi;" \
+ "if test $board_name = panda-es; then " \
+ "setenv fdtfile omap4-panda-es.dtb; fi; \0" \
"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
#define CONFIG_BOOTCOMMAND \
diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
index eacb5f5..abf586b 100644
--- a/include/configs/omap4_panda.h
+++ b/include/configs/omap4_panda.h
@@ -66,4 +66,6 @@
#define CONFIG_SYS_PROMPT "Panda # "
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
#endif /* __CONFIG_PANDA_H */
diff --git a/include/configs/omap5_common.h b/include/configs/omap5_common.h
index c21c387..ddf2ad4 100644
--- a/include/configs/omap5_common.h
+++ b/include/configs/omap5_common.h
@@ -45,10 +45,6 @@
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
-/* Clock Defines */
-#define V_OSCK 19200000 /* Clock output from T2 */
-#define V_SCLK V_OSCK
-
#define CONFIG_MISC_INIT_R
#define CONFIG_OF_LIBFDT
@@ -81,10 +77,9 @@
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
-#define CONFIG_CONS_INDEX 3
-#define CONFIG_SYS_NS16550_COM3 UART3_BASE
-#define CONFIG_BAUDRATE 115200
+/* CPU */
+#define CONFIG_ARCH_CPU_INIT
/* I2C */
#define CONFIG_HARD_I2C
@@ -150,10 +145,12 @@
"usbtty=cdc_acm\0" \
"vram=16M\0" \
"partitions=" PARTS_DEFAULT "\0" \
+ "optargs=\0" \
"mmcdev=0\0" \
"mmcroot=/dev/mmcblk0p2 rw\0" \
"mmcrootfstype=ext4 rootwait\0" \
"mmcargs=setenv bootargs console=${console} " \
+ "${optargs} " \
"vram=${vram} " \
"root=${mmcroot} " \
"rootfstype=${mmcrootfstype}\0" \
@@ -241,6 +238,10 @@
#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
#endif
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_PALMAS_POWER
+#endif
+
/* Defines for SPL */
#define CONFIG_SPL
#define CONFIG_SPL_FRAMEWORK
diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index 550cabd..dea05bc 100644
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -35,10 +35,9 @@
#include <configs/omap5_common.h>
-/* TWL6035 */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_TWL6035_POWER
-#endif
+#define CONFIG_CONS_INDEX 3
+#define CONFIG_SYS_NS16550_COM3 UART3_BASE
+#define CONFIG_BAUDRATE 115200
/* MMC ENV related defines */
#define CONFIG_ENV_IS_IN_MMC
@@ -56,4 +55,5 @@
#define CONFIG_SYS_PROMPT "OMAP5430 EVM # "
+#define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC 16296
#endif /* __CONFIG_OMAP5_EVM_H */
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 7ed634b..2fa5372 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -217,6 +217,7 @@
#define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */
#define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */
#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */
#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h
index d7b1ca2..a19de07 100644
--- a/include/configs/p3p440.h
+++ b/include/configs/p3p440.h
@@ -241,6 +241,7 @@
*----------------------------------------------------------------------*/
/* General PCI */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h
index d0ea74e..2ecd105 100644
--- a/include/configs/pcm051.h
+++ b/include/configs/pcm051.h
@@ -20,6 +20,7 @@
#define __CONFIG_PCM051_H
#define CONFIG_AM33XX
+#define CONFIG_OMAP
#include <asm/arch/omap.h>
@@ -129,7 +130,6 @@
+ (8 * 1024 * 1024))
#define CONFIG_SYS_LOAD_ADDR 0x80007fc0 /* Default load address */
-#define CONFIG_SYS_HZ 1000 /* 1ms clock */
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
@@ -158,13 +158,12 @@
/* Platform/Board specific defs */
#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_HZ 1000 /* 1ms clock */
#define CONFIG_CONS_INDEX 1
/* NS16550 Configuration */
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SERIAL_MULTI
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
#define CONFIG_SYS_NS16550_CLK (48000000)
#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
@@ -194,6 +193,9 @@
#define CONFIG_SYS_BAUDRATE_TABLE { 110, 300, 600, 1200, 2400, \
4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 }
+/* CPU */
+#define CONFIG_ARCH_CPU_INIT
+
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SYS_CONSOLE_INFO_QUIET
@@ -202,8 +204,13 @@
/* Defines for SPL */
#define CONFIG_SPL
#define CONFIG_SPL_FRAMEWORK
+/*
+ * Place the image at the start of the ROM defined image space.
+ * We limit our size to the ROM-defined downloaded image area, and use the
+ * rest of the space for stack.
+ */
#define CONFIG_SPL_TEXT_BASE 0x402F0400
-#define CONFIG_SPL_MAX_SIZE (101 * 1024)
+#define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE)
#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
#define CONFIG_SPL_BSS_START_ADDR 0x80000000
diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
index 351ff5a..1897619 100644
--- a/include/configs/pcs440ep.h
+++ b/include/configs/pcs440ep.h
@@ -317,6 +317,7 @@
*/
/* General PCI */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE*/
diff --git a/include/configs/pdm360ng.h b/include/configs/pdm360ng.h
index 306abcc..db95cb0 100644
--- a/include/configs/pdm360ng.h
+++ b/include/configs/pdm360ng.h
@@ -341,6 +341,11 @@
#define CONFIG_SYS_I2C_SLAVE 0x7F
/*
+ * IIM - IC Identification Module
+ */
+#undef CONFIG_FSL_IIM
+
+/*
* EEPROM configuration
*/
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* 16-bit EEPROM addr */
@@ -402,6 +407,8 @@
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
+#undef CONFIG_CMD_FUSE
+
#ifdef CONFIG_VIDEO
#define CONFIG_CMD_BMP
#endif
diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index b60a9ad..6f6ddfa 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -355,7 +355,7 @@
#define CONFIG_BOOTCOMMAND "run flashboot"
#define CONFIG_ROOTPATH "/ronetix/rootfs"
-#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n", bootdelay
#define CONFIG_CON_ROT "fbcon=rotate:3 "
#define CONFIG_BOOTARGS "root=/dev/mtdblock4 rootfstype=jffs2 "\
diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h
index 5cd6609..3f9fdd4 100644
--- a/include/configs/ppmc7xx.h
+++ b/include/configs/ppmc7xx.h
@@ -118,6 +118,7 @@
*/
#define CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCI_PNP
#undef CONFIG_PCI_SCAN_SHOW
@@ -233,7 +234,7 @@
#define CONFIG_SYS_FLASH_ERASE_TOUT 250000
#define CONFIG_SYS_FLASH_WRITE_TOUT 5000
#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 19
+#define CONFIG_SYS_MAX_FLASH_SECT 128
/*
diff --git a/include/configs/rpi_b.h b/include/configs/rpi_b.h
index c18b35b..216c6cb 100644
--- a/include/configs/rpi_b.h
+++ b/include/configs/rpi_b.h
@@ -61,6 +61,7 @@
#define CONFIG_BCM2835_GPIO
/* LCD */
#define CONFIG_LCD
+#define CONFIG_LCD_DT_SIMPLEFB
#define LCD_BPP LCD_COLOR16
/*
* Prevent allocation of RAM for FB; the real FB address is queried
@@ -175,6 +176,7 @@
/* Device tree support for bootm/bootz */
#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
/* ATAGs support for bootm/bootz */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_CMDLINE_TAG
diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
new file mode 100644
index 0000000..c13e983
--- /dev/null
+++ b/include/configs/sama5d3xek.h
@@ -0,0 +1,245 @@
+/*
+ * Configuation settings for the SAMA5D3xEK board.
+ *
+ * Copyright (C) 2012 - 2013 Atmel
+ *
+ * based on at91sam9m10g45ek.h by:
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/hardware.h>
+
+#define CONFIG_SYS_TEXT_BASE 0x26f00000
+
+/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
+#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_AT91FAMILY
+#define CONFIG_ARCH_CPU_INIT
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_OF_LIBFDT /* Device Tree support */
+
+/* general purpose I/O */
+#define CONFIG_AT91_GPIO
+
+/* serial console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE ATMEL_BASE_DBGU
+#define CONFIG_USART_ID ATMEL_ID_DBGU
+
+/*
+ * This needs to be defined for the OHCI code to work but it is defined as
+ * ATMEL_ID_UHPHS in the CPU specific header files.
+ */
+#define ATMEL_ID_UHP ATMEL_ID_UHPHS
+
+/*
+ * Specify the clock enable bit in the PMC_SCER register.
+ */
+#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP
+
+/* LCD */
+#define CONFIG_LCD
+#define LCD_BPP LCD_COLOR16
+#define LCD_OUTPUT_BPP 24
+#define CONFIG_LCD_LOGO
+#undef LCD_TEST_PATTERN
+#define CONFIG_LCD_INFO
+#define CONFIG_LCD_INFO_BELOW_LOGO
+#define CONFIG_SYS_WHITE_ON_BLACK
+#define CONFIG_ATMEL_HLCD
+#define CONFIG_ATMEL_LCD_RGB565
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+/* board specific (not enough SRAM) */
+#define CONFIG_SAMA5D3_LCD_BASE 0x23E00000
+
+#define CONFIG_BOOTDELAY 3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/* No NOR flash */
+#define CONFIG_SYS_NO_FLASH
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_LOADS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
+#define CONFIG_SYS_SDRAM_SIZE 0x20000000
+
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+
+/* SerialFlash */
+#define CONFIG_CMD_SF
+
+#ifdef CONFIG_CMD_SF
+#define CONFIG_ATMEL_SPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_ATMEL
+#define CONFIG_SF_DEFAULT_SPEED 30000000
+#endif
+
+/* NAND flash */
+#define CONFIG_CMD_NAND
+
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_MAX_CHIPS 1
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+/* PMECC & PMERRLOC */
+#define CONFIG_ATMEL_NAND_HWECC
+#define CONFIG_ATMEL_NAND_HW_PMECC
+#define CONFIG_PMECC_CAP 4
+#define CONFIG_PMECC_SECTOR_SIZE 512
+#define CONFIG_PMECC_INDEX_TABLE_OFFSET ATMEL_PMECC_INDEX_OFFSET_512
+#define CONFIG_CMD_NAND_TRIMFFS
+#endif
+
+/* Ethernet Hardware */
+#define CONFIG_MACB
+#define CONFIG_RMII
+#define CONFIG_NET_MULTI
+#define CONFIG_NET_RETRY_COUNT 20
+#define CONFIG_MACB_SEARCH_PHY
+
+/* MMC */
+#define CONFIG_CMD_MMC
+
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_GENERIC_ATMEL_MCI
+#define ATMEL_BASE_MMCI ATMEL_BASE_MCI0
+#endif
+
+/* USB */
+#define CONFIG_CMD_USB
+
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_BASE_OHCI
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "sama5d3"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3
+#define CONFIG_DOS_PARTITION
+#define CONFIG_USB_STORAGE
+#endif
+
+#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
+#define CONFIG_CMD_FAT
+#endif
+
+#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
+
+#ifdef CONFIG_SYS_USE_SERIALFLASH
+/* bootstrap + u-boot + env + linux in serial flash */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_OFFSET 0x5000
+#define CONFIG_ENV_SIZE 0x3000
+#define CONFIG_ENV_SECT_SIZE 0x1000
+#define CONFIG_BOOTCOMMAND "sf probe 0; " \
+ "sf read 0x22000000 0x42000 0x300000; " \
+ "bootm 0x22000000"
+#elif CONFIG_SYS_USE_NANDFLASH
+/* bootstrap + u-boot + env in nandflash */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET 0xc0000
+#define CONFIG_ENV_OFFSET_REDUND 0x100000
+#define CONFIG_ENV_SIZE 0x20000
+#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0x180000 0x80000;" \
+ "nand read 0x22000000 0x200000 0x600000;" \
+ "bootm 0x22000000 - 0x21000000"
+#elif CONFIG_SYS_USE_MMC
+/* bootstrap + u-boot + env in sd card */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET 0x2000
+#define CONFIG_ENV_SIZE 0x1000
+#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 dtb; " \
+ "fatload mmc 0:1 0x22000000 uImage; " \
+ "bootm 0x22000000 - 0x21000000"
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#else
+#define CONIG_ENV_IS_NOWHERE
+#endif
+
+#ifdef CONFIG_SYS_USE_MMC
+#define CONFIG_BOOTARGS \
+ "console=ttyS0,115200 earlyprintk " \
+ "root=/dev/mmcblk0p2 rw rootwait"
+#else
+#define CONFIG_BOOTARGS \
+ "console=ttyS0,115200 earlyprintk " \
+ "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
+ "256K(env),256k(evn_redundent),256k(spare)," \
+ "512k(dtb),6M(kernel)ro,-(rootfs) " \
+ "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
+#endif
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_SYS_PROMPT "U-Boot> "
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)
+
+#endif
diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h
index 5abcda3..6e53bc2 100644
--- a/include/configs/sbc405.h
+++ b/include/configs/sbc405.h
@@ -183,6 +183,7 @@
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
/* resource configuration */
diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index 478d0d8..fdc1b95 100644
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -573,6 +573,7 @@
/* PCI @ 0x80000000 */
#ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE \
| BATL_PP_RW \
| BATL_MEMCOHERENCE)
diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h
index 2209ddf..148ade3 100644
--- a/include/configs/sbc8548.h
+++ b/include/configs/sbc8548.h
@@ -33,6 +33,7 @@
* Top level Makefile configuration choices
*/
#ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCI1
#endif
diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h
index 9040ec6..0e2d17d 100644
--- a/include/configs/sbc8641d.h
+++ b/include/configs/sbc8641d.h
@@ -64,6 +64,7 @@
#define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */
#define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
+#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
#define CONFIG_TSEC_ENET /* tsec ethernet support */
diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index fb74608..9dec21d 100644
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -269,6 +269,7 @@
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
/* resource configuration */
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index dd5d7cd..11fce53 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -363,6 +363,7 @@
*/
/* General PCI */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_SYS_PCI_CACHE_LINE_SIZE 0 /* to avoid problems with PNP */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index 25f15f2..7a0b481 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -48,6 +48,7 @@
#define CONFIG_SYS_TEXT_BASE 0xfff80000
#define CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_TSEC_ENET /* tsec ethernet support */
diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index c1a90a7..96d7128 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -46,6 +46,7 @@
#define CONFIG_SYS_TEXT_BASE 0xFFF80000
#define CONFIG_PCI /* PCI ethernet support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_TSEC_ENET /* tsec ethernet support*/
#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */
#define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/t3corp.h b/include/configs/t3corp.h
index 2a731a6..ff2189c 100644
--- a/include/configs/t3corp.h
+++ b/include/configs/t3corp.h
@@ -376,6 +376,7 @@
*/
/* General PCI */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CONFIG_PCI_CONFIG_HOST_BRIDGE
diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h
index b5462b7..aa90249 100644
--- a/include/configs/t4qds.h
+++ b/include/configs/t4qds.h
@@ -29,13 +29,14 @@
#ifdef CONFIG_RAMBOOT_PBL
#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
+#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_pbi.cfg
+#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_rcw.cfg
#endif
#define CONFIG_CMD_REGINFO
/* High Level Configuration Options */
#define CONFIG_BOOKE
-#define CONFIG_E6500
#define CONFIG_E500 /* BOOKE e500 family */
#define CONFIG_E500MC /* BOOKE e500mc family */
#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */
@@ -656,6 +657,7 @@
#endif
#ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_E1000
diff --git a/include/configs/taihu.h b/include/configs/taihu.h
index a3738b7..a43c3da 100644
--- a/include/configs/taihu.h
+++ b/include/configs/taihu.h
@@ -171,6 +171,7 @@
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
/* resource configuration */
diff --git a/include/configs/taishan.h b/include/configs/taishan.h
index 3046081..c9f1a9f 100644
--- a/include/configs/taishan.h
+++ b/include/configs/taishan.h
@@ -192,6 +192,7 @@
*/
/* General PCI */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_EEPRO100 1 /* include PCI EEPRO100 */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h
index bf18699..6ed2fde 100644
--- a/include/configs/tegra-common-post.h
+++ b/include/configs/tegra-common-post.h
@@ -157,6 +157,8 @@
/* overrides for SPL build here */
#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
/* remove devicetree support */
#ifdef CONFIG_OF_CONTROL
#undef CONFIG_OF_CONTROL
diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h
index c2986d8..721b29c 100644
--- a/include/configs/tegra114-common.h
+++ b/include/configs/tegra114-common.h
@@ -74,8 +74,6 @@
#define CONFIG_SYS_SPL_MALLOC_START 0x80090000
#define CONFIG_SPL_STACK 0x800ffffc
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra114/u-boot-spl.lds"
-
/* Total I2C ports on Tegra114 */
#define TEGRA_I2C_NUM_CONTROLLERS 5
diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h
index 395a657..d5abecb 100644
--- a/include/configs/tegra20-common.h
+++ b/include/configs/tegra20-common.h
@@ -88,8 +88,6 @@
#define CONFIG_SYS_SPL_MALLOC_START 0x00090000
#define CONFIG_SPL_STACK 0x000ffffc
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra20/u-boot-spl.lds"
-
/* Align LCD to 1MB boundary */
#define CONFIG_LCD_ALIGNMENT MMU_SECTION_SIZE
diff --git a/include/configs/tegra30-common.h b/include/configs/tegra30-common.h
index f6c07c6..ed36e11 100644
--- a/include/configs/tegra30-common.h
+++ b/include/configs/tegra30-common.h
@@ -87,8 +87,6 @@
#define CONFIG_SYS_SPL_MALLOC_START 0x80090000
#define CONFIG_SPL_STACK 0x800ffffc
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra30/u-boot-spl.lds"
-
/* Total I2C ports on Tegra30 */
#define TEGRA_I2C_NUM_CONTROLLERS 5
diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h
index 16547e3..eac5ad0 100644
--- a/include/configs/ti814x_evm.h
+++ b/include/configs/ti814x_evm.h
@@ -19,6 +19,7 @@
#define CONFIG_TI81XX
#define CONFIG_TI814X
#define CONFIG_SYS_NO_FLASH
+#define CONFIG_OMAP
#include <asm/arch/omap.h>
@@ -162,6 +163,9 @@
#define CONFIG_BAUDRATE 115200
+/* CPU */
+#define CONFIG_ARCH_CPU_INIT
+
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
#define CONFIG_SYS_CONSOLE_INFO_QUIET
@@ -218,4 +222,25 @@
/* Unsupported features */
#undef CONFIG_USE_IRQ
+/* Ethernet */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_MII
+#define CONFIG_DRIVER_TI_CPSW
+#define CONFIG_MII
+#define CONFIG_BOOTP_DEFAULT
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_NET_RETRY_COUNT 10
+#define CONFIG_NET_MULTI
+#define CONFIG_PHY_GIGE
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_ADDR 1
+#define CONFIG_PHY_ET1011C
+#define CONFIG_PHY_ET1011C_TX_CLK_FIX
+
#endif /* ! __CONFIG_TI814X_EVM_H */
diff --git a/include/configs/titanium.h b/include/configs/titanium.h
new file mode 100644
index 0000000..41e4513
--- /dev/null
+++ b/include/configs/titanium.h
@@ -0,0 +1,277 @@
+/*
+ * Copyright (C) 2013 Stefan Roese <sr@denx.de>
+ *
+ * Configuration settings for the ProjectionDesign / Barco
+ * Titanium board.
+ *
+ * Based on mx6qsabrelite.h which is:
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/imx-regs.h>
+#include <asm/imx-common/gpio.h>
+
+#define CONFIG_MX6
+#define CONFIG_MX6Q
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define MACH_TYPE_TITANIUM 3769
+#define CONFIG_MACH_TYPE MACH_TYPE_TITANIUM
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024)
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_MISC_INIT_R
+#define CONFIG_MXC_GPIO
+
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE UART1_BASE
+
+/* I2C Configs */
+#define CONFIG_CMD_I2C
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_MXC
+#define CONFIG_SYS_I2C_SPEED 100000
+
+/* MMC Configs */
+#define CONFIG_FSL_ESDHC
+#define CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+#define CONFIG_SYS_FSL_USDHC_NUM 1
+
+#define CONFIG_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_BOUNCE_BUFFER
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define IMX_FEC_BASE ENET_BASE_ADDR
+#define CONFIG_FEC_XCV_TYPE RGMII
+#define CONFIG_FEC_MXC_PHYADDR 4
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MICREL
+#define CONFIG_PHY_MICREL_KSZ9021
+
+/* USB Configs */
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_FAT
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_USB_STORAGE
+#define CONFIG_MXC_USB_PORT 1
+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS 0
+
+/* Miscellaneous commands */
+#define CONFIG_CMD_BMODE
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+
+/* Command definition */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_BOOTDELAY 3
+
+#define CONFIG_LOADADDR 0x12000000
+#define CONFIG_SYS_TEXT_BASE 0x17800000
+
+#define CONFIG_SYS_MEMTEST_START 0x10000000
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (500 << 20))
+
+#define CONFIG_HOSTNAME titanium
+#define CONFIG_UBI_PART ubi
+#define CONFIG_UBIFS_VOLUME rootfs0
+
+#define MTDIDS_DEFAULT "nand0=gpmi-nand"
+#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:16M(uboot),512k(env1)," \
+ "512k(env2),-(ubi)"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "kernel=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
+ "kernel_fs=/boot/uImage\0" \
+ "kernel_addr=11000000\0" \
+ "dtb=" __stringify(CONFIG_HOSTNAME) "/" \
+ __stringify(CONFIG_HOSTNAME) ".dtb\0" \
+ "dtb_fs=/boot/" __stringify(CONFIG_HOSTNAME) ".dtb\0" \
+ "dtb_addr=12800000\0" \
+ "script=boot.scr\0" \
+ "uimage=uImage\0" \
+ "console=ttymxc0\0" \
+ "baudrate=115200\0" \
+ "fdt_high=0xffffffff\0" \
+ "initrd_high=0xffffffff\0" \
+ "mmcdev=0\0" \
+ "mmcpart=1\0" \
+ "uimage=uImage\0" \
+ "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
+ " ${script}\0" \
+ "bootscript=echo Running bootscript from mmc ...; source\0" \
+ "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+ "mmcroot=/dev/mmcblk0p2\0" \
+ "mmcargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${mmcroot} rootwait rw\0" \
+ "bootmmc=run mmcargs; fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
+ " ${uimage}; bootm\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addcon=setenv bootargs ${bootargs} console=ttymxc0," \
+ "${baudrate}\0" \
+ "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
+ "rootpath=/opt/eldk-5.3/armv7a/rootfs-minimal-mtdutils\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ubifs=" __stringify(CONFIG_HOSTNAME) "/ubifs.img\0" \
+ "part=" __stringify(CONFIG_UBI_PART) "\0" \
+ "boot_vol=0\0" \
+ "vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0" \
+ "load_ubifs=tftp ${kernel_addr} ${ubifs}\0" \
+ "update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}" \
+ " ${filesize}\0" \
+ "upd_ubifs=run load_ubifs update_ubifs\0" \
+ "init_ubi=nand erase.part ubi;ubi part ${part};" \
+ "ubi create ${vol} c800000\0" \
+ "mtdids=" MTDIDS_DEFAULT "\0" \
+ "mtdparts=" MTDPARTS_DEFAULT "\0" \
+ "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip" \
+ " addcon addmtd;" \
+ "bootm ${kernel_addr} - ${dtb_addr}\0" \
+ "ubifsargs=set bootargs ubi.mtd=ubi " \
+ "root=ubi:rootfs${boot_vol} rootfstype=ubifs\0" \
+ "ubifs_mount=ubi part ubi;ubifsmount ubi:rootfs${boot_vol}\0" \
+ "ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};" \
+ "ubifsload ${dtb_addr} ${dtb_fs};\0" \
+ "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon " \
+ "addmtd;bootm ${kernel_addr} - ${dtb_addr}\0" \
+ "load_kernel=tftp ${kernel_addr} ${kernel}\0" \
+ "load_dtb=tftp ${dtb_addr} ${dtb}\0" \
+ "net_nfs=run load_dtb load_kernel; " \
+ "run nfsargs addip addcon addmtd;" \
+ "bootm ${kernel_addr} - ${dtb_addr}\0" \
+ "delenv=env default -a -f; saveenv; reset\0"
+
+#define CONFIG_BOOTCOMMAND "run nand_ubifs"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT "Titanium > "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */
+
+#define CONFIG_SYS_CBSIZE 256
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+#define CONFIG_SYS_HZ 1000
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
+#define PHYS_SDRAM_SIZE (512 << 20)
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+
+/* Enable NAND support */
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NAND_TRIMFFS
+#define CONFIG_CMD_TIME
+
+#ifdef CONFIG_CMD_NAND
+
+/* NAND stuff */
+#define CONFIG_NAND_MXS
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE 0x40000000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
+/* DMA stuff, needed for GPMI/MXS NAND support */
+#define CONFIG_APBH_DMA
+#define CONFIG_APBH_DMA_BURST
+#define CONFIG_APBH_DMA_BURST8
+
+/* Environment in NAND */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET (16 << 20)
+#define CONFIG_ENV_SECT_SIZE (128 << 10)
+#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 << 10))
+#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
+
+#else /* CONFIG_CMD_NAND */
+
+/* Environment in MMC */
+#define CONFIG_ENV_SIZE (8 << 10)
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
+#define CONFIG_SYS_MMC_ENV_DEV 0
+
+#endif /* CONFIG_CMD_NAND */
+
+/* UBI/UBIFS config options */
+#define CONFIG_LZO
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_RBTREE
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_CMD_BOOTZ
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+#define CONFIG_CMD_CACHE
+#endif
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/tnetv107x_evm.h b/include/configs/tnetv107x_evm.h
index d6371fc..cabc06e 100644
--- a/include/configs/tnetv107x_evm.h
+++ b/include/configs/tnetv107x_evm.h
@@ -82,8 +82,8 @@
#define CONFIG_SYS_NAND_CS 2
#define CONFIG_SYS_NAND_USE_FLASH_BBT
#define CONFIG_SYS_NAND_BASE TNETV107X_ASYNC_EMIF_DATA_CE0_BASE
-#define CONFIG_SYS_CLE_MASK 0x10
-#define CONFIG_SYS_ALE_MASK 0x8
+#define CONFIG_SYS_NAND_MASK_CLE 0x10
+#define CONFIG_SYS_NAND_MASK_ALE 0x8
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_MTD_PARTITIONS
#define CONFIG_CMD_MTDPARTS
diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h
index 66568c8..60d1503 100644
--- a/include/configs/utx8245.h
+++ b/include/configs/utx8245.h
@@ -139,6 +139,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */
#undef CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_EEPRO100
diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h
index d3b8379..7b1130a 100644
--- a/include/configs/ve8313.h
+++ b/include/configs/ve8313.h
@@ -43,6 +43,7 @@
#endif
#define CONFIG_PCI 1
+#define CONFIG_PCI_INDIRECT_BRIDGE 1
#define CONFIG_FSL_ELBC 1
#define CONFIG_BOARD_EARLY_INIT_F 1
diff --git a/arch/arm/include/asm/arch-mx25/sys_proto.h b/include/configs/vexpress_ca15_tc2.h
similarity index 60%
copy from arch/arm/include/asm/arch-mx25/sys_proto.h
copy to include/configs/vexpress_ca15_tc2.h
index 46db341..9e230ad 100644
--- a/arch/arm/include/asm/arch-mx25/sys_proto.h
+++ b/include/configs/vexpress_ca15_tc2.h
@@ -1,6 +1,9 @@
/*
- * (C) Copyright 2009
- * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ * (C) Copyright 2013 Linaro
+ * Andre Przywara, <andre.przywara@linaro.org>
+ *
+ * Configuration for Versatile Express. Parts were derived from other ARM
+ * configurations.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -12,7 +15,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -21,12 +24,13 @@
* MA 02111-1307 USA
*/
-#ifndef _SYS_PROTO_H_
-#define _SYS_PROTO_H_
+#ifndef __VEXPRESS_CA15X2_TC2_h
+#define __VEXPRESS_CA15X2_TC2_h
-void mx25_uart1_init_pins(void);
-#if defined CONFIG_FEC_MXC
-extern void mx25_fec_init_pins(void);
-#endif
+#define CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP
+#include "vexpress_common.h"
+#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.vexpress_ca15x2_tc2"
+
+#define CONFIG_SYS_CLK_FREQ 24000000
#endif
diff --git a/arch/arm/include/asm/arch-mx25/sys_proto.h b/include/configs/vexpress_ca5x2.h
similarity index 61%
copy from arch/arm/include/asm/arch-mx25/sys_proto.h
copy to include/configs/vexpress_ca5x2.h
index 46db341..9331134 100644
--- a/arch/arm/include/asm/arch-mx25/sys_proto.h
+++ b/include/configs/vexpress_ca5x2.h
@@ -1,6 +1,9 @@
/*
- * (C) Copyright 2009
- * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ * (C) Copyright 2011 Linaro
+ * Ryan Harkin, <ryan.harkin@linaro.org>
+ *
+ * Configuration for Versatile Express. Parts were derived from other ARM
+ * configurations.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -12,7 +15,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -21,12 +24,11 @@
* MA 02111-1307 USA
*/
-#ifndef _SYS_PROTO_H_
-#define _SYS_PROTO_H_
+#ifndef __VEXPRESS_CA5X2_h
+#define __VEXPRESS_CA5X2_h
-void mx25_uart1_init_pins(void);
-#if defined CONFIG_FEC_MXC
-extern void mx25_fec_init_pins(void);
-#endif
+#define CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP
+#include "vexpress_common.h"
+#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.vexpress_ca5x2"
-#endif
+#endif /* __VEXPRESS_CA5X2_h */
diff --git a/arch/arm/include/asm/arch-mx25/sys_proto.h b/include/configs/vexpress_ca9x4.h
similarity index 61%
copy from arch/arm/include/asm/arch-mx25/sys_proto.h
copy to include/configs/vexpress_ca9x4.h
index 46db341..c3b6986 100644
--- a/arch/arm/include/asm/arch-mx25/sys_proto.h
+++ b/include/configs/vexpress_ca9x4.h
@@ -1,6 +1,9 @@
/*
- * (C) Copyright 2009
- * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ * (C) Copyright 2011 Linaro
+ * Ryan Harkin, <ryan.harkin@linaro.org>
+ *
+ * Configuration for Versatile Express. Parts were derived from other ARM
+ * configurations.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -12,7 +15,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -21,12 +24,11 @@
* MA 02111-1307 USA
*/
-#ifndef _SYS_PROTO_H_
-#define _SYS_PROTO_H_
+#ifndef __VEXPRESS_CA9X4_H
+#define __VEXPRESS_CA9X4_H
-void mx25_uart1_init_pins(void);
-#if defined CONFIG_FEC_MXC
-extern void mx25_fec_init_pins(void);
-#endif
+#define CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP
+#include "vexpress_common.h"
+#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.vexpress_ca9x4"
-#endif
+#endif /* VEXPRESS_CA9X4_H */
diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h
new file mode 100644
index 0000000..3c5683a
--- /dev/null
+++ b/include/configs/vexpress_common.h
@@ -0,0 +1,315 @@
+/*
+ * (C) Copyright 2011 ARM Limited
+ * (C) Copyright 2010 Linaro
+ * Matt Waddel, <matt.waddel@linaro.org>
+ *
+ * Configuration for Versatile Express. Parts were derived from other ARM
+ * configurations.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __VEXPRESS_COMMON_H
+#define __VEXPRESS_COMMON_H
+
+/*
+ * Definitions copied from linux kernel:
+ * arch/arm/mach-vexpress/include/mach/motherboard.h
+ */
+#ifdef CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP
+/* CS register bases for the original memory map. */
+#define V2M_PA_CS0 0x40000000
+#define V2M_PA_CS1 0x44000000
+#define V2M_PA_CS2 0x48000000
+#define V2M_PA_CS3 0x4c000000
+#define V2M_PA_CS7 0x10000000
+
+#define V2M_PERIPH_OFFSET(x) (x << 12)
+#define V2M_SYSREGS (V2M_PA_CS7 + V2M_PERIPH_OFFSET(0))
+#define V2M_SYSCTL (V2M_PA_CS7 + V2M_PERIPH_OFFSET(1))
+#define V2M_SERIAL_BUS_PCI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(2))
+
+#define V2M_BASE 0x60000000
+#define CONFIG_SYS_TEXT_BASE 0x60800000
+#elif defined(CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP)
+/* CS register bases for the extended memory map. */
+#define V2M_PA_CS0 0x08000000
+#define V2M_PA_CS1 0x0c000000
+#define V2M_PA_CS2 0x14000000
+#define V2M_PA_CS3 0x18000000
+#define V2M_PA_CS7 0x1c000000
+
+#define V2M_PERIPH_OFFSET(x) (x << 16)
+#define V2M_SYSREGS (V2M_PA_CS7 + V2M_PERIPH_OFFSET(1))
+#define V2M_SYSCTL (V2M_PA_CS7 + V2M_PERIPH_OFFSET(2))
+#define V2M_SERIAL_BUS_PCI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(3))
+
+#define V2M_BASE 0x80000000
+#define CONFIG_SYS_TEXT_BASE 0x80800000
+#endif
+
+/*
+ * Physical addresses, offset from V2M_PA_CS0-3
+ */
+#define V2M_NOR0 (V2M_PA_CS0)
+#define V2M_NOR1 (V2M_PA_CS1)
+#define V2M_SRAM (V2M_PA_CS2)
+#define V2M_VIDEO_SRAM (V2M_PA_CS3 + 0x00000000)
+#define V2M_LAN9118 (V2M_PA_CS3 + 0x02000000)
+#define V2M_ISP1761 (V2M_PA_CS3 + 0x03000000)
+
+/* Common peripherals relative to CS7. */
+#define V2M_AACI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(4))
+#define V2M_MMCI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(5))
+#define V2M_KMI0 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(6))
+#define V2M_KMI1 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(7))
+
+#define V2M_UART0 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(9))
+#define V2M_UART1 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(10))
+#define V2M_UART2 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(11))
+#define V2M_UART3 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(12))
+
+#define V2M_WDT (V2M_PA_CS7 + V2M_PERIPH_OFFSET(15))
+
+#define V2M_TIMER01 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(17))
+#define V2M_TIMER23 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(18))
+
+#define V2M_SERIAL_BUS_DVI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(22))
+#define V2M_RTC (V2M_PA_CS7 + V2M_PERIPH_OFFSET(23))
+
+#define V2M_CF (V2M_PA_CS7 + V2M_PERIPH_OFFSET(26))
+
+#define V2M_CLCD (V2M_PA_CS7 + V2M_PERIPH_OFFSET(31))
+#define V2M_SIZE_CS7 V2M_PERIPH_OFFSET(32)
+
+/* System register offsets. */
+#define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0)
+#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4)
+#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8)
+
+/*
+ * Configuration
+ */
+#define SYS_CFG_START (1 << 31)
+#define SYS_CFG_WRITE (1 << 30)
+#define SYS_CFG_OSC (1 << 20)
+#define SYS_CFG_VOLT (2 << 20)
+#define SYS_CFG_AMP (3 << 20)
+#define SYS_CFG_TEMP (4 << 20)
+#define SYS_CFG_RESET (5 << 20)
+#define SYS_CFG_SCC (6 << 20)
+#define SYS_CFG_MUXFPGA (7 << 20)
+#define SYS_CFG_SHUTDOWN (8 << 20)
+#define SYS_CFG_REBOOT (9 << 20)
+#define SYS_CFG_DVIMODE (11 << 20)
+#define SYS_CFG_POWER (12 << 20)
+#define SYS_CFG_SITE_MB (0 << 16)
+#define SYS_CFG_SITE_DB1 (1 << 16)
+#define SYS_CFG_SITE_DB2 (2 << 16)
+#define SYS_CFG_STACK(n) ((n) << 12)
+
+#define SYS_CFG_ERR (1 << 1)
+#define SYS_CFG_COMPLETE (1 << 0)
+
+/* Board info register */
+#define SYS_ID V2M_SYSREGS
+#define CONFIG_REVISION_TAG 1
+
+#define CONFIG_SYS_MEMTEST_START V2M_BASE
+#define CONFIG_SYS_MEMTEST_END 0x20000000
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_SYS_L2CACHE_OFF 1
+#define CONFIG_INITRD_TAG 1
+
+#define CONFIG_OF_LIBFDT 1
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
+
+#define SCTL_BASE V2M_SYSCTL
+#define VEXPRESS_FLASHPROG_FLVPPEN (1 << 0)
+
+/* SMSC9115 Ethernet from SMSC9118 family */
+#define CONFIG_SMC911X 1
+#define CONFIG_SMC911X_32_BIT 1
+#define CONFIG_SMC911X_BASE V2M_LAN9118
+
+/* PL011 Serial Configuration */
+#define CONFIG_PL011_SERIAL
+#define CONFIG_PL011_CLOCK 24000000
+#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \
+ (void *)CONFIG_SYS_SERIAL1}
+#define CONFIG_CONS_INDEX 0
+
+#define CONFIG_BAUDRATE 38400
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_SERIAL0 V2M_UART0
+#define CONFIG_SYS_SERIAL1 V2M_UART1
+
+/* Command line configuration */
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PXE
+#define CONFIG_MENU
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_SUPPORT_RAW_INITRD
+
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION 1
+#define CONFIG_MMC 1
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_ARM_PL180_MMCI
+#define CONFIG_ARM_PL180_MMCI_BASE V2M_MMCI
+#define CONFIG_SYS_MMC_MAX_BLK_COUNT 127
+#define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ 6250000
+
+/* BOOTP options */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_PXE
+#define CONFIG_BOOTP_PXE_CLIENTARCH 0x100
+
+/* Miscellaneous configurable options */
+#undef CONFIG_SYS_CLKS_IN_HZ
+#define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x8000)
+#define LINUX_BOOT_PARAM_ADDR (V2M_BASE + 0x2000)
+#define CONFIG_BOOTDELAY 2
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 2
+#define PHYS_SDRAM_1 (V2M_BASE) /* SDRAM Bank #1 */
+#define PHYS_SDRAM_2 (((unsigned int)V2M_BASE) + \
+ ((unsigned int)0x20000000))
+#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */
+#define PHYS_SDRAM_2_SIZE 0x20000000 /* 512 MB */
+
+/* additions for new relocation code */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET
+
+/* Basic environment settings */
+#define CONFIG_BOOTCOMMAND "run bootflash;"
+#ifdef CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP
+#define CONFIG_PLATFORM_ENV_SETTINGS \
+ "loadaddr=0x80008000\0" \
+ "ramdisk_addr_r=0x61000000\0" \
+ "kernel_addr=0x44100000\0" \
+ "ramdisk_addr=0x44800000\0" \
+ "maxramdisk=0x1800000\0" \
+ "pxefile_addr_r=0x88000000\0" \
+ "kernel_addr_r=0x80008000\0"
+#elif defined(CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP)
+#define CONFIG_PLATFORM_ENV_SETTINGS \
+ "loadaddr=0xa0008000\0" \
+ "ramdisk_addr_r=0x81000000\0" \
+ "kernel_addr=0x0c100000\0" \
+ "ramdisk_addr=0x0c800000\0" \
+ "maxramdisk=0x1800000\0" \
+ "pxefile_addr_r=0xa8000000\0" \
+ "kernel_addr_r=0xa0008000\0"
+#endif
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ CONFIG_PLATFORM_ENV_SETTINGS \
+ "console=ttyAMA0,38400n8\0" \
+ "dram=1024M\0" \
+ "root=/dev/sda1 rw\0" \
+ "mtd=armflash:1M@0x800000(uboot),7M@0x1000000(kernel)," \
+ "24M@0x2000000(initrd)\0" \
+ "flashargs=setenv bootargs root=${root} console=${console} " \
+ "mem=${dram} mtdparts=${mtd} mmci.fmax=190000 " \
+ "devtmpfs.mount=0 vmalloc=256M\0" \
+ "bootflash=run flashargs; " \
+ "cp ${ramdisk_addr} ${ramdisk_addr_r} ${maxramdisk}; " \
+ "bootm ${kernel_addr} ${ramdisk_addr_r}\0"
+
+/* FLASH and environment organization */
+#define PHYS_FLASH_SIZE 0x04000000 /* 64MB */
+#define CONFIG_SYS_FLASH_CFI 1
+#define CONFIG_FLASH_CFI_DRIVER 1
+#define CONFIG_SYS_FLASH_SIZE 0x04000000
+#define CONFIG_SYS_MAX_FLASH_BANKS 2
+#define CONFIG_SYS_FLASH_BASE0 V2M_NOR0
+#define CONFIG_SYS_FLASH_BASE1 V2M_NOR1
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE0
+
+/* Timeout values in ticks */
+#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Erase Timeout */
+#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Write Timeout */
+
+/* 255 0x40000 sectors + first or last sector may have 4 erase regions = 259 */
+#define CONFIG_SYS_MAX_FLASH_SECT 259 /* Max sectors */
+#define FLASH_MAX_SECTOR_SIZE 0x00040000 /* 256 KB sectors */
+
+/* Room required on the stack for the environment data */
+#define CONFIG_ENV_SIZE FLASH_MAX_SECTOR_SIZE
+
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */
+
+/*
+ * Amount of flash used for environment:
+ * We don't know which end has the small erase blocks so we use the penultimate
+ * sector location for the environment
+ */
+#define CONFIG_ENV_SECT_SIZE FLASH_MAX_SECTOR_SIZE
+#define CONFIG_ENV_OVERWRITE 1
+
+/* Store environment at top of flash */
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_OFFSET (PHYS_FLASH_SIZE - \
+ (2 * CONFIG_ENV_SECT_SIZE))
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE1 + \
+ CONFIG_ENV_OFFSET)
+#define CONFIG_SYS_FLASH_PROTECTION /* The devices have real protection */
+#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE0, \
+ CONFIG_SYS_FLASH_BASE1 }
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PROMPT "VExpress# "
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_HUSH_PARSER
+
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */
+#define CONFIG_CMD_SOURCE
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_SYS_MAXARGS 16 /* max command args */
+
+#endif /* VEXPRESS_COMMON_H */
diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
new file mode 100644
index 0000000..77fe893
--- /dev/null
+++ b/include/configs/vf610twr.h
@@ -0,0 +1,140 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the Freescale Vybrid vf610twr board.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/imx-regs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_VF610
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define CONFIG_MACH_TYPE 4146
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+/* Enable passing of ATAGs */
+#define CONFIG_CMDLINE_TAG
+
+#define CONFIG_CMD_FUSE
+#ifdef CONFIG_CMD_FUSE
+#define CONFIG_MXC_OCOTP
+#endif
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_FSL_LPUART
+#define LPUART_BASE UART1_BASE
+
+/* Allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_SYS_UART_PORT (1)
+#define CONFIG_BAUDRATE 115200
+
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+#define CONFIG_SYS_FSL_ESDHC_NUM 1
+
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define IMX_FEC_BASE ENET_BASE_ADDR
+#define CONFIG_FEC_XCV_TYPE RMII
+#define CONFIG_FEC_MXC_PHYADDR 0
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MICREL
+
+#define CONFIG_BOOTDELAY 3
+
+#define CONFIG_SYS_TEXT_BASE 0x3f008000
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_PROMPT "Vybrid U-Boot > "
+#undef CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_SYS_MEMTEST_START 0x80010000
+#define CONFIG_SYS_MEMTEST_END 0x87C00000
+
+#define CONFIG_SYS_LOAD_ADDR 0x80010000
+
+#define CONFIG_SYS_HZ 1000
+
+/*
+ * Stack sizes
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
+
+/* Physical memory map */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM (0x80000000)
+#define PHYS_SDRAM_SIZE (128 * 1024 * 1024)
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ENV_SIZE (8 * 1024)
+#define CONFIG_ENV_IS_IN_MMC
+
+#define CONFIG_ENV_OFFSET (12 * 64 * 1024)
+#define CONFIG_SYS_MMC_ENV_DEV 0
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_CMD_BOOTZ
+
+#endif
diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h
index 61e02e6..f97de54 100644
--- a/include/configs/vme8349.h
+++ b/include/configs/vme8349.h
@@ -489,6 +489,7 @@
/* PCI @ 0x80000000 */
#ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_RW | \
BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | \
diff --git a/include/configs/walnut.h b/include/configs/walnut.h
index d10f748..219f276 100644
--- a/include/configs/walnut.h
+++ b/include/configs/walnut.h
@@ -112,6 +112,7 @@
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
/* resource configuration */
diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index 120e3f6..5593f1c 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -29,9 +29,10 @@
#define CONFIG_REVISION_TAG
/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M)
+#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART
@@ -47,6 +48,9 @@
#undef CONFIG_CMD_IMLS
+#define CONFIG_CMD_BMODE
+#define CONFIG_CMD_SETEXPR
+
#define CONFIG_BOOTDELAY 5
#define CONFIG_SYS_MEMTEST_START 0x10000000
@@ -57,6 +61,7 @@
/* MMC Configuration */
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_USDHC_NUM 2
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_MMC
@@ -81,6 +86,21 @@
#define CONFIG_PHYLIB
#define CONFIG_PHY_ATHEROS
+/* Framebuffer */
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_IPUV3
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_IPUV3_CLK 260000000
+
#if defined(CONFIG_MX6DL)
#define CONFIG_DEFAULT_FDT_FILE "imx6dl-wandboard.dtb"
#elif defined(CONFIG_MX6S)
@@ -97,9 +117,23 @@
"fdt_addr=0x11000000\0" \
"boot_fdt=try\0" \
"ip_dyn=yes\0" \
- "mmcdev=0\0" \
+ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
"mmcpart=2\0" \
"mmcroot=/dev/mmcblk0p3 rootwait rw\0" \
+ "update_sd_firmware_filename=u-boot.imx\0" \
+ "update_sd_firmware=" \
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "if mmc dev ${mmcdev}; then " \
+ "if ${get_cmd} ${update_sd_firmware_filename}; then " \
+ "setexpr fw_sz ${filesize} / 0x200; " \
+ "setexpr fw_sz ${fw_sz} + 1; " \
+ "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
+ "fi; " \
+ "fi\0" \
"mmcargs=setenv bootargs console=${console},${baudrate} " \
"root=${mmcroot}\0" \
"loadbootscript=" \
diff --git a/include/configs/xpedite1000.h b/include/configs/xpedite1000.h
index 506d646..1f48cc5 100644
--- a/include/configs/xpedite1000.h
+++ b/include/configs/xpedite1000.h
@@ -167,6 +167,7 @@
*/
/* General PCI */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h
index 1851a00..f28f443 100644
--- a/include/configs/xpedite517x.h
+++ b/include/configs/xpedite517x.h
@@ -49,6 +49,7 @@
#define CONFIG_PCIE1 1 /* PCIE controler 1 */
#define CONFIG_PCIE2 1 /* PCIE controler 2 */
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
+#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */
#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
diff --git a/include/configs/xpedite520x.h b/include/configs/xpedite520x.h
index ff99481..3034a3c 100644
--- a/include/configs/xpedite520x.h
+++ b/include/configs/xpedite520x.h
@@ -48,6 +48,7 @@
#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */
#define CONFIG_PCI1 1 /* PCI controller 1 */
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
+#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */
#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h
index 46f1c90..43359a2 100644
--- a/include/configs/xpedite537x.h
+++ b/include/configs/xpedite537x.h
@@ -49,6 +49,7 @@
#define CONFIG_PCIE1 1 /* PCIE controler 1 */
#define CONFIG_PCIE2 1 /* PCIE controler 2 */
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
+#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */
#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h
index 2acf6c8..a171085 100644
--- a/include/configs/xpedite550x.h
+++ b/include/configs/xpedite550x.h
@@ -48,6 +48,7 @@
#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */
#define CONFIG_PCIE1 1 /* PCIE controler 1 (PEX8112 or XMC) */
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
+#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */
#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index 0cbef6f..cde0df1 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -222,6 +222,7 @@
*/
/* General PCI */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE*/
diff --git a/include/configs/yucca.h b/include/configs/yucca.h
index fb684b5..3282d37 100644
--- a/include/configs/yucca.h
+++ b/include/configs/yucca.h
@@ -199,6 +199,7 @@
*/
/* General PCI */
#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_PNP 1 /* do pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */
#define CONFIG_PCI_CONFIG_HOST_BRIDGE
diff --git a/include/configs/zynq.h b/include/configs/zynq.h
index 2989e72..38f04f6 100644
--- a/include/configs/zynq.h
+++ b/include/configs/zynq.h
@@ -50,19 +50,50 @@
#define CONFIG_ZYNQ_SERIAL_BAUDRATE0 CONFIG_BAUDRATE
#define CONFIG_ZYNQ_SERIAL_CLOCK0 50000000
-/* SCU timer address is hardcoded */
-#define CONFIG_SCUTIMER_BASEADDR 0xF8F00600
-
/* Ethernet driver */
#define CONFIG_NET_MULTI
#define CONFIG_ZYNQ_GEM
-#define CONFIG_ZYNQ_GEM_BASEADDR0 0xE000B000
+#define CONFIG_ZYNQ_GEM0
+#define CONFIG_ZYNQ_GEM_PHY_ADDR0 7
+
+#define CONFIG_ZYNQ_SDHCI
+#define CONFIG_ZYNQ_SDHCI0
+
+/* MMC */
+#if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
+# define CONFIG_MMC
+# define CONFIG_GENERIC_MMC
+# define CONFIG_SDHCI
+# define CONFIG_ZYNQ_SDHCI
+# define CONFIG_CMD_MMC
+# define CONFIG_CMD_FAT
+# define CONFIG_SUPPORT_VFAT
+# define CONFIG_CMD_EXT2
+# define CONFIG_DOS_PARTITION
+#endif
+
+#define CONFIG_ZYNQ_I2C0
+
+/* I2C */
+#if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1)
+# define CONFIG_CMD_I2C
+# define CONFIG_ZYNQ_I2C
+# define CONFIG_HARD_I2C
+# define CONFIG_SYS_I2C_SPEED 100000
+# define CONFIG_SYS_I2C_SLAVE 1
+#endif
#if defined(CONFIG_ZYNQ_DCC)
# define CONFIG_ARM_DCC
# define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */
#endif
+/* Enable the PL to be downloaded */
+#define CONFIG_FPGA
+#define CONFIG_FPGA_XILINX
+#define CONFIG_FPGA_ZYNQPL
+#define CONFIG_CMD_FPGA
+
#define CONFIG_BOOTP_SERVERIP
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
diff --git a/include/fdtdec.h b/include/fdtdec.h
index 4e8032b..1ece612 100644
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@@ -93,6 +93,7 @@
COMPAT_GENERIC_SPI_FLASH, /* Generic SPI Flash chip */
COMPAT_MAXIM_98095_CODEC, /* MAX98095 Codec */
COMPAT_INFINEON_SLB9635_TPM, /* Infineon SLB9635 TPM */
+ COMPAT_INFINEON_SLB9645_TPM, /* Infineon SLB9645 TPM */
COMPAT_COUNT,
};
diff --git a/include/fpga.h b/include/fpga.h
index 30a4e6a..38e9018 100644
--- a/include/fpga.h
+++ b/include/fpga.h
@@ -31,16 +31,6 @@
#define CONFIG_MAX_FPGA_DEVICES 5
#endif
-/* CONFIG_FPGA bit assignments */
-#define CONFIG_SYS_FPGA_MAN(x) (x)
-#define CONFIG_SYS_FPGA_DEV(x) ((x) << 8 )
-#define CONFIG_SYS_FPGA_IF(x) ((x) << 16 )
-
-/* FPGA Manufacturer bits in CONFIG_FPGA */
-#define CONFIG_SYS_FPGA_XILINX CONFIG_SYS_FPGA_MAN( 0x1 )
-#define CONFIG_SYS_FPGA_ALTERA CONFIG_SYS_FPGA_MAN( 0x2 )
-
-
/* fpga_xxxx function return value definitions */
#define FPGA_SUCCESS 0
#define FPGA_FAIL -1
@@ -68,7 +58,10 @@
extern int fpga_add(fpga_type devtype, void *desc);
extern int fpga_count(void);
extern int fpga_load(int devnum, const void *buf, size_t bsize);
+extern int fpga_loadbitstream(int devnum, char *fpgadata, size_t size);
extern int fpga_dump(int devnum, const void *buf, size_t bsize);
extern int fpga_info(int devnum);
+extern const fpga_desc *const fpga_validate(int devnum, const void *buf,
+ size_t bsize, char *fn);
#endif /* _FPGA_H_ */
diff --git a/include/fuse.h b/include/fuse.h
new file mode 100644
index 0000000..b964137
--- /dev/null
+++ b/include/fuse.h
@@ -0,0 +1,44 @@
+/*
+ * (C) Copyright 2009-2013 ADVANSEE
+ * Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
+ *
+ * Based on the mpc512x iim code:
+ * Copyright 2008 Silicon Turnkey Express, Inc.
+ * Martha Marx <mmarx@silicontkx.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _FUSE_H_
+#define _FUSE_H_
+
+/*
+ * Read/Sense/Program/Override interface:
+ * bank: Fuse bank
+ * word: Fuse word within the bank
+ * val: Value to read/write
+ *
+ * Returns: 0 on success, not 0 on failure
+ */
+int fuse_read(u32 bank, u32 word, u32 *val);
+int fuse_sense(u32 bank, u32 word, u32 *val);
+int fuse_prog(u32 bank, u32 word, u32 val);
+int fuse_override(u32 bank, u32 word, u32 val);
+
+#endif /* _FUSE_H_ */
diff --git a/include/image.h b/include/image.h
index b8cc523..8ccc00b 100644
--- a/include/image.h
+++ b/include/image.h
@@ -402,6 +402,13 @@
#endif
void genimg_print_time(time_t timestamp);
+/* What to do with a image load address ('load = <> 'in the FIT) */
+enum fit_load_op {
+ FIT_LOAD_IGNORED, /* Ignore load address */
+ FIT_LOAD_OPTIONAL, /* Can be provided, but optional */
+ FIT_LOAD_REQUIRED, /* Must be provided */
+};
+
#ifndef USE_HOSTCC
/* Image format types, returned by _get_format() routine */
#define IMAGE_FORMAT_INVALID 0x00
@@ -415,8 +422,71 @@
int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images,
uint8_t arch, ulong *rd_start, ulong *rd_end);
-int boot_get_fdt(int flag, int argc, char * const argv[],
- bootm_headers_t *images, char **of_flat_tree, ulong *of_size);
+/**
+ * fit_image_load() - load an image from a FIT
+ *
+ * This deals with all aspects of loading an image from a FIT, including
+ * selecting the right image based on configuration, verifying it, printing
+ * out progress messages, checking the type/arch/os and optionally copying it
+ * to the right load address.
+ *
+ * @param images Boot images structure
+ * @param prop_name Property name to look up (FIT_..._PROP)
+ * @param addr Address of FIT in memory
+ * @param fit_unamep On entry this is the requested image name
+ * (e.g. "kernel@1") or NULL to use the default. On exit
+ * points to the selected image name
+ * @param fit_uname_config Requested configuration name, or NULL for the
+ * default
+ * @param arch Expected architecture (IH_ARCH_...)
+ * @param image_type Required image type (IH_TYPE_...). If this is
+ * IH_TYPE_KERNEL then we allow IH_TYPE_KERNEL_NOLOAD
+ * also.
+ * @param bootstage_id ID of starting bootstage to use for progress updates.
+ * This will be added to the BOOTSTAGE_SUB values when
+ * calling bootstage_mark()
+ * @param load_op Decribes what to do with the load address
+ * @param datap Returns address of loaded image
+ * @param lenp Returns length of loaded image
+ */
+int fit_image_load(bootm_headers_t *images, const char *prop_name, ulong addr,
+ const char **fit_unamep, const char *fit_uname_config,
+ int arch, int image_type, int bootstage_id,
+ enum fit_load_op load_op, ulong *datap, ulong *lenp);
+
+/**
+ * fit_get_node_from_config() - Look up an image a FIT by type
+ *
+ * This looks in the selected conf@ node (images->fit_uname_cfg) for a
+ * particular image type (e.g. "kernel") and then finds the image that is
+ * referred to.
+ *
+ * For example, for something like:
+ *
+ * images {
+ * kernel@1 {
+ * ...
+ * };
+ * };
+ * configurations {
+ * conf@1 {
+ * kernel = "kernel@1";
+ * };
+ * };
+ *
+ * the function will return the node offset of the kernel@1 node, assuming
+ * that conf@1 is the chosen configuration.
+ *
+ * @param images Boot images structure
+ * @param prop_name Property name to look up (FIT_..._PROP)
+ * @param addr Address of FIT in memory
+ */
+int fit_get_node_from_config(bootm_headers_t *images, const char *prop_name,
+ ulong addr);
+
+int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch,
+ bootm_headers_t *images,
+ char **of_flat_tree, ulong *of_size);
void boot_fdt_add_mem_rsv_regions(struct lmb *lmb, void *fdt_blob);
int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size);
@@ -697,6 +767,7 @@
int fit_add_verification_data(void *fit);
int fit_image_verify(const void *fit, int noffset);
+int fit_config_verify(const void *fit, int conf_noffset);
int fit_all_image_verify(const void *fit);
int fit_image_check_os(const void *fit, int noffset, uint8_t os);
int fit_image_check_arch(const void *fit, int noffset, uint8_t arch);
@@ -706,9 +777,6 @@
int fit_conf_find_compat(const void *fit, const void *fdt);
int fit_conf_get_node(const void *fit, const char *conf_uname);
-int fit_conf_get_kernel_node(const void *fit, int noffset);
-int fit_conf_get_ramdisk_node(const void *fit, int noffset);
-int fit_conf_get_fdt_node(const void *fit, int noffset);
/**
* fit_conf_get_prop_node() - Get node refered to by a configuration
@@ -732,12 +800,35 @@
int calculate_hash(const void *data, int data_len, const char *algo,
uint8_t *value, int *value_len);
-#ifndef USE_HOSTCC
+/*
+ * At present we only support verification on the device
+ */
+#if defined(CONFIG_FIT_SIGNATURE)
+# ifdef USE_HOSTCC
+# define IMAGE_ENABLE_VERIFY 0
+#else
+# define IMAGE_ENABLE_VERIFY 1
+# endif
+#else
+# define IMAGE_ENABLE_VERIFY 0
+#endif
+
+#ifdef USE_HOSTCC
+# define gd_fdt_blob() NULL
+#else
+# define gd_fdt_blob() (gd->fdt_blob)
+#endif
+
+#ifdef CONFIG_FIT_BEST_MATCH
+#define IMAGE_ENABLE_BEST_MATCH 1
+#else
+#define IMAGE_ENABLE_BEST_MATCH 0
+#endif
+
static inline int fit_image_check_target_arch(const void *fdt, int node)
{
return fit_image_check_arch(fdt, node, IH_ARCH_DEFAULT);
}
-#endif /* USE_HOSTCC */
#ifdef CONFIG_FIT_VERBOSE
#define fit_unsupported(msg) printf("! %s:%d " \
diff --git a/include/lattice.h b/include/lattice.h
index 6a2cf93..49871da 100644
--- a/include/lattice.h
+++ b/include/lattice.h
@@ -278,9 +278,6 @@
char *desc; /* description string */
} Lattice_desc; /* end, typedef Altera_desc */
-/* Lattice Model Type */
-#define CONFIG_SYS_XP2 CONFIG_SYS_FPGA_DEV(0x1)
-
/* Board specific implementation specific function types */
typedef void (*Lattice_jtag_init)(void);
typedef void (*Lattice_jtag_set_tdi)(int v);
diff --git a/include/lcd.h b/include/lcd.h
index c6e7fc5..30225ed 100644
--- a/include/lcd.h
+++ b/include/lcd.h
@@ -324,6 +324,9 @@
/* Return the size of the LCD frame buffer, and the line length */
int lcd_get_size(int *line_length);
+int lcd_dt_simplefb_add_node(void *blob);
+int lcd_dt_simplefb_enable_existing_node(void *blob);
+
/************************************************************************/
/* ** BITMAP DISPLAY SUPPORT */
/************************************************************************/
diff --git a/include/linux/bitrev.h b/include/linux/bitrev.h
new file mode 100644
index 0000000..a61d956
--- /dev/null
+++ b/include/linux/bitrev.h
@@ -0,0 +1,23 @@
+/*
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ *
+ * Based on bitrev from the Linux kernel, by Akinobu Mita
+ */
+
+#ifndef _LINUX_BITREV_H
+#define _LINUX_BITREV_H
+
+#include <linux/types.h>
+
+extern u8 const byte_rev_table[256];
+
+static inline u8 bitrev8(u8 byte)
+{
+ return byte_rev_table[byte];
+}
+
+u16 bitrev16(u16 in);
+u32 bitrev32(u32 in);
+
+#endif /* _LINUX_BITREV_H */
diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h
index 8cbcdae..71292b1 100644
--- a/include/linux/mtd/bbm.h
+++ b/include/linux/mtd/bbm.h
@@ -81,32 +81,53 @@
#define NAND_BBT_LASTBLOCK 0x00000010
/* The bbt is at the given page, else we must scan for the bbt */
#define NAND_BBT_ABSPAGE 0x00000020
-/* The bbt is at the given page, else we must scan for the bbt */
-#define NAND_BBT_SEARCH 0x00000040
/* bbt is stored per chip on multichip devices */
#define NAND_BBT_PERCHIP 0x00000080
/* bbt has a version counter at offset veroffs */
#define NAND_BBT_VERSION 0x00000100
/* Create a bbt if none exists */
#define NAND_BBT_CREATE 0x00000200
+/*
+ * Create an empty BBT with no vendor information. Vendor's information may be
+ * unavailable, for example, if the NAND controller has a different data and OOB
+ * layout or if this information is already purged. Must be used in conjunction
+ * with NAND_BBT_CREATE.
+ */
+#define NAND_BBT_CREATE_EMPTY 0x00000400
/* Search good / bad pattern through all pages of a block */
-#define NAND_BBT_SCANALLPAGES 0x00000400
+#define NAND_BBT_SCANALLPAGES 0x00000800
/* Scan block empty during good / bad block scan */
-#define NAND_BBT_SCANEMPTY 0x00000800
+#define NAND_BBT_SCANEMPTY 0x00001000
/* Write bbt if neccecary */
-#define NAND_BBT_WRITE 0x00001000
+#define NAND_BBT_WRITE 0x00002000
/* Read and write back block contents when writing bbt */
-#define NAND_BBT_SAVECONTENT 0x00002000
+#define NAND_BBT_SAVECONTENT 0x00004000
/* Search good / bad pattern on the first and the second page */
-#define NAND_BBT_SCAN2NDPAGE 0x00004000
+#define NAND_BBT_SCAN2NDPAGE 0x00008000
/* Search good / bad pattern on the last page of the eraseblock */
-#define NAND_BBT_SCANLASTPAGE 0x00008000
-/* Chip stores bad block marker on BOTH 1st and 6th bytes of OOB */
-#define NAND_BBT_SCANBYTE1AND6 0x00100000
-/* The nand_bbt_descr was created dynamicaly and must be freed */
-#define NAND_BBT_DYNAMICSTRUCT 0x00200000
-/* The bad block table does not OOB for marker */
-#define NAND_BBT_NO_OOB 0x00400000
+#define NAND_BBT_SCANLASTPAGE 0x00010000
+/*
+ * Use a flash based bad block table. By default, OOB identifier is saved in
+ * OOB area. This option is passed to the default bad block table function.
+ */
+#define NAND_BBT_USE_FLASH 0x00020000
+/*
+ * Do not store flash based bad block table marker in the OOB area; store it
+ * in-band.
+ */
+#define NAND_BBT_NO_OOB 0x00040000
+/*
+ * Do not write new bad block markers to OOB; useful, e.g., when ECC covers
+ * entire spare area. Must be used with NAND_BBT_USE_FLASH.
+ */
+#define NAND_BBT_NO_OOB_BBM 0x00080000
+
+/*
+ * Flag set by nand_create_default_bbt_descr(), marking that the nand_bbt_descr
+ * was allocated dynamicaly and must be freed in nand_release(). Has no meaning
+ * in nand_chip.bbt_options.
+ */
+#define NAND_BBT_DYNAMICSTRUCT 0x80000000
/* The maximum number of blocks to scan for a bbt */
#define NAND_BBT_SCAN_MAXBLOCKS 4
diff --git a/include/linux/mtd/docg4.h b/include/linux/mtd/docg4.h
new file mode 100644
index 0000000..982f5ad
--- /dev/null
+++ b/include/linux/mtd/docg4.h
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2013 Mike Dunn <mikedunn@newsguy.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ *
+ */
+
+#ifndef __DOCG4_H__
+#define __DOCG4_H__
+
+#include <common.h>
+#include <linux/mtd/nand.h>
+
+extern int docg4_nand_init(struct mtd_info *mtd,
+ struct nand_chip *nand, int devnum);
+
+/* SPL-related definitions */
+#define DOCG4_IPL_LOAD_BLOCK_COUNT 2 /* number of blocks that IPL loads */
+#define DOCG4_BLOCK_CAPACITY_SPL 0x10000 /* reliable mode; redundant pages */
+
+#define DOC_IOSPACE_DATA 0x0800
+
+/* register offsets */
+#define DOC_CHIPID 0x1000
+#define DOC_DEVICESELECT 0x100a
+#define DOC_ASICMODE 0x100c
+#define DOC_DATAEND 0x101e
+#define DOC_NOP 0x103e
+
+#define DOC_FLASHSEQUENCE 0x1032
+#define DOC_FLASHCOMMAND 0x1034
+#define DOC_FLASHADDRESS 0x1036
+#define DOC_FLASHCONTROL 0x1038
+#define DOC_ECCCONF0 0x1040
+#define DOC_ECCCONF1 0x1042
+#define DOC_HAMMINGPARITY 0x1046
+#define DOC_BCH_SYNDROM(idx) (0x1048 + idx)
+
+#define DOC_ASICMODECONFIRM 0x1072
+#define DOC_CHIPID_INV 0x1074
+#define DOC_POWERMODE 0x107c
+
+#define DOCG4_MYSTERY_REG 0x1050
+
+/* apparently used only to write oob bytes 6 and 7 */
+#define DOCG4_OOB_6_7 0x1052
+
+/* DOC_FLASHSEQUENCE register commands */
+#define DOC_SEQ_RESET 0x00
+#define DOCG4_SEQ_PAGE_READ 0x03
+#define DOCG4_SEQ_FLUSH 0x29
+#define DOCG4_SEQ_PAGEWRITE 0x16
+#define DOCG4_SEQ_PAGEPROG 0x1e
+#define DOCG4_SEQ_BLOCKERASE 0x24
+
+/* DOC_FLASHCOMMAND register commands */
+#define DOCG4_CMD_PAGE_READ 0x00
+#define DOC_CMD_ERASECYCLE2 0xd0
+#define DOCG4_CMD_FLUSH 0x70
+#define DOCG4_CMD_READ2 0x30
+#define DOC_CMD_PROG_BLOCK_ADDR 0x60
+#define DOCG4_CMD_PAGEWRITE 0x80
+#define DOC_CMD_PROG_CYCLE2 0x10
+#define DOC_CMD_RESET 0xff
+
+/* DOC_POWERMODE register bits */
+#define DOC_POWERDOWN_READY 0x80
+
+/* DOC_FLASHCONTROL register bits */
+#define DOC_CTRL_CE 0x10
+#define DOC_CTRL_UNKNOWN 0x40
+#define DOC_CTRL_FLASHREADY 0x01
+
+/* DOC_ECCCONF0 register bits */
+#define DOC_ECCCONF0_READ_MODE 0x8000
+#define DOC_ECCCONF0_UNKNOWN 0x2000
+#define DOC_ECCCONF0_ECC_ENABLE 0x1000
+#define DOC_ECCCONF0_DATA_BYTES_MASK 0x07ff
+
+/* DOC_ECCCONF1 register bits */
+#define DOC_ECCCONF1_BCH_SYNDROM_ERR 0x80
+#define DOC_ECCCONF1_ECC_ENABLE 0x07
+#define DOC_ECCCONF1_PAGE_IS_WRITTEN 0x20
+
+/* DOC_ASICMODE register bits */
+#define DOC_ASICMODE_RESET 0x00
+#define DOC_ASICMODE_NORMAL 0x01
+#define DOC_ASICMODE_POWERDOWN 0x02
+#define DOC_ASICMODE_MDWREN 0x04
+#define DOC_ASICMODE_BDETCT_RESET 0x08
+#define DOC_ASICMODE_RSTIN_RESET 0x10
+#define DOC_ASICMODE_RAM_WE 0x20
+
+/* good status values read after read/write/erase operations */
+#define DOCG4_PROGSTATUS_GOOD 0x51
+#define DOCG4_PROGSTATUS_GOOD_2 0xe0
+
+/*
+ * On read operations (page and oob-only), the first byte read from I/O reg is a
+ * status. On error, it reads 0x73; otherwise, it reads either 0x71 (first read
+ * after reset only) or 0x51, so bit 1 is presumed to be an error indicator.
+ */
+#define DOCG4_READ_ERROR 0x02 /* bit 1 indicates read error */
+
+/* anatomy of the device */
+#define DOCG4_CHIP_SIZE 0x8000000
+#define DOCG4_PAGE_SIZE 0x200
+#define DOCG4_PAGES_PER_BLOCK 0x200
+#define DOCG4_BLOCK_SIZE (DOCG4_PAGES_PER_BLOCK * DOCG4_PAGE_SIZE)
+#define DOCG4_NUMBLOCKS (DOCG4_CHIP_SIZE / DOCG4_BLOCK_SIZE)
+#define DOCG4_OOB_SIZE 0x10
+#define DOCG4_CHIP_SHIFT 27 /* log_2(DOCG4_CHIP_SIZE) */
+#define DOCG4_PAGE_SHIFT 9 /* log_2(DOCG4_PAGE_SIZE) */
+#define DOCG4_ERASE_SHIFT 18 /* log_2(DOCG4_BLOCK_SIZE) */
+
+/* all but the last byte is included in ecc calculation */
+#define DOCG4_BCH_SIZE (DOCG4_PAGE_SIZE + DOCG4_OOB_SIZE - 1)
+
+#define DOCG4_USERDATA_LEN 520 /* 512 byte page plus 8 oob avail to user */
+
+/* expected values from the ID registers */
+#define DOCG4_IDREG1_VALUE 0x0400
+#define DOCG4_IDREG2_VALUE 0xfbff
+
+/* primitive polynomial used to build the Galois field used by hw ecc gen */
+#define DOCG4_PRIMITIVE_POLY 0x4443
+
+#define DOCG4_M 14 /* Galois field is of order 2^14 */
+#define DOCG4_T 4 /* BCH alg corrects up to 4 bit errors */
+
+#define DOCG4_FACTORY_BBT_PAGE 16 /* page where read-only factory bbt lives */
+
+#endif /* __DOCG4_H__ */
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 141c960..6f44abd 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -9,7 +9,8 @@
#include <linux/types.h>
#include <div64.h>
-#include <linux/mtd/mtd-abi.h>
+#include <mtd/mtd-abi.h>
+#include <asm/errno.h>
#define MTD_CHAR_MAJOR 90
#define MTD_BLOCK_MAJOR 31
@@ -65,22 +66,6 @@
unsigned long *lockmap; /* If keeping bitmap of locks */
};
-/*
- * oob operation modes
- *
- * MTD_OOB_PLACE: oob data are placed at the given offset
- * MTD_OOB_AUTO: oob data are automatically placed at the free areas
- * which are defined by the ecclayout
- * MTD_OOB_RAW: mode to read raw data+oob in one chunk. The oob data
- * is inserted into the data. Thats a raw image of the
- * flash contents.
- */
-typedef enum {
- MTD_OOB_PLACE,
- MTD_OOB_AUTO,
- MTD_OOB_RAW,
-} mtd_oob_mode_t;
-
/**
* struct mtd_oob_ops - oob operation operands
* @mode: operation mode
@@ -92,7 +77,7 @@
* @ooblen: number of oob bytes to write/read
* @oobretlen: number of oob bytes written/read
* @ooboffs: offset of oob data in the oob area (only relevant when
- * mode = MTD_OOB_PLACE)
+ * mode = MTD_OPS_PLACE_OOB or MTD_OPS_RAW)
* @datbuf: data buffer - if NULL only oob data are read/written
* @oobbuf: oob data buffer
*
@@ -101,7 +86,7 @@
* OOB area.
*/
struct mtd_oob_ops {
- mtd_oob_mode_t mode;
+ unsigned int mode;
size_t len;
size_t retlen;
size_t ooblen;
@@ -133,13 +118,25 @@
u_int32_t oobsize; /* Amount of OOB data per block (e.g. 16) */
u_int32_t oobavail; /* Available OOB bytes per block */
+ /*
+ * read ops return -EUCLEAN if max number of bitflips corrected on any
+ * one region comprising an ecc step equals or exceeds this value.
+ * Settable by driver, else defaults to ecc_strength. User can override
+ * in sysfs. N.B. The meaning of the -EUCLEAN return code has changed;
+ * see Documentation/ABI/testing/sysfs-class-mtd for more detail.
+ */
+ unsigned int bitflip_threshold;
+
/* Kernel-only stuff starts here. */
const char *name;
int index;
- /* ecc layout structure pointer - read only ! */
+ /* ECC layout structure pointer - read only! */
struct nand_ecclayout *ecclayout;
+ /* max number of correctible bit errors per ecc step */
+ unsigned int ecc_strength;
+
/* Data for variable erase regions. If numeraseregions is zero,
* it means that the whole device has erasesize as given above.
*/
@@ -147,25 +144,17 @@
struct mtd_erase_region_info *eraseregions;
/*
- * Erase is an asynchronous operation. Device drivers are supposed
- * to call instr->callback() whenever the operation completes, even
- * if it completes with a failure.
- * Callers are supposed to pass a callback function and wait for it
- * to be called before writing to the block.
+ * Do not call via these pointers, use corresponding mtd_*()
+ * wrappers instead.
*/
- int (*erase) (struct mtd_info *mtd, struct erase_info *instr);
-
- /* This stuff for eXecute-In-Place */
- /* phys is optional and may be set to NULL */
- int (*point) (struct mtd_info *mtd, loff_t from, size_t len,
+ int (*_erase) (struct mtd_info *mtd, struct erase_info *instr);
+ int (*_point) (struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, void **virt, phys_addr_t *phys);
-
- /* We probably shouldn't allow XIP if the unpoint isn't a NULL */
- void (*unpoint) (struct mtd_info *mtd, loff_t from, size_t len);
-
-
- int (*read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
- int (*write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
+ void (*_unpoint) (struct mtd_info *mtd, loff_t from, size_t len);
+ int (*_read) (struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf);
+ int (*_write) (struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf);
/* In blackbox flight recorder like scenarios we want to make successful
writes in interrupt context. panic_write() is only intended to be
@@ -174,24 +163,35 @@
longer, this function can break locks and delay to ensure the write
succeeds (but not sleep). */
- int (*panic_write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
+ int (*_panic_write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
- int (*read_oob) (struct mtd_info *mtd, loff_t from,
+ int (*_read_oob) (struct mtd_info *mtd, loff_t from,
struct mtd_oob_ops *ops);
- int (*write_oob) (struct mtd_info *mtd, loff_t to,
+ int (*_write_oob) (struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops);
-
+ int (*_get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf,
+ size_t len);
+ int (*_read_fact_prot_reg) (struct mtd_info *mtd, loff_t from,
+ size_t len, size_t *retlen, u_char *buf);
+ int (*_get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf,
+ size_t len);
+ int (*_read_user_prot_reg) (struct mtd_info *mtd, loff_t from,
+ size_t len, size_t *retlen, u_char *buf);
+ int (*_write_user_prot_reg) (struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, u_char *buf);
+ int (*_lock_user_prot_reg) (struct mtd_info *mtd, loff_t from,
+ size_t len);
+ void (*_sync) (struct mtd_info *mtd);
+ int (*_lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
+ int (*_unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
+ int (*_block_isbad) (struct mtd_info *mtd, loff_t ofs);
+ int (*_block_markbad) (struct mtd_info *mtd, loff_t ofs);
/*
- * Methods to access the protection register area, present in some
- * flash devices. The user data is one time programmable but the
- * factory data is read only.
+ * If the driver is something smart, like UBI, it may need to maintain
+ * its own reference counting. The below functions are only for driver.
*/
- int (*get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len);
- int (*read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
- int (*get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len);
- int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
- int (*write_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
- int (*lock_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len);
+ int (*_get_device) (struct mtd_info *mtd);
+ void (*_put_device) (struct mtd_info *mtd);
/* XXX U-BOOT XXX */
#if 0
@@ -201,18 +201,6 @@
*/
int (*writev) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen);
#endif
-
- /* Sync */
- void (*sync) (struct mtd_info *mtd);
-
- /* Chip-supported device locking */
- int (*lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
- int (*unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
-
- /* Bad block management functions */
- int (*block_isbad) (struct mtd_info *mtd, loff_t ofs);
- int (*block_markbad) (struct mtd_info *mtd, loff_t ofs);
-
/* XXX U-BOOT XXX */
#if 0
struct notifier_block reboot_notifier; /* default mode before reboot */
@@ -227,15 +215,59 @@
struct module *owner;
int usecount;
-
- /* If the driver is something smart, like UBI, it may need to maintain
- * its own reference counting. The below functions are only for driver.
- * The driver may register its callbacks. These callbacks are not
- * supposed to be called by MTD users */
- int (*get_device) (struct mtd_info *mtd);
- void (*put_device) (struct mtd_info *mtd);
};
+int mtd_erase(struct mtd_info *mtd, struct erase_info *instr);
+int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
+ u_char *buf);
+int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
+ const u_char *buf);
+int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
+ const u_char *buf);
+
+int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops);
+
+static inline int mtd_write_oob(struct mtd_info *mtd, loff_t to,
+ struct mtd_oob_ops *ops)
+{
+ ops->retlen = ops->oobretlen = 0;
+ if (!mtd->_write_oob)
+ return -EOPNOTSUPP;
+ if (!(mtd->flags & MTD_WRITEABLE))
+ return -EROFS;
+ return mtd->_write_oob(mtd, to, ops);
+}
+
+int mtd_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf,
+ size_t len);
+int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf);
+int mtd_get_user_prot_info(struct mtd_info *mtd, struct otp_info *buf,
+ size_t len);
+int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf);
+int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, u_char *buf);
+int mtd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len);
+
+/* XXX U-BOOT XXX */
+#if 0
+int mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
+ unsigned long count, loff_t to, size_t *retlen);
+#endif
+
+static inline void mtd_sync(struct mtd_info *mtd)
+{
+ if (mtd->_sync)
+ mtd->_sync(mtd);
+}
+
+int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+int mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs);
+int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs);
+
static inline uint32_t mtd_div_by_eb(uint64_t sz, struct mtd_info *mtd)
{
do_div(sz, mtd->erasesize);
@@ -247,6 +279,16 @@
return do_div(sz, mtd->erasesize);
}
+static inline int mtd_has_oob(const struct mtd_info *mtd)
+{
+ return mtd->_read_oob && mtd->_write_oob;
+}
+
+static inline int mtd_can_have_bb(const struct mtd_info *mtd)
+{
+ return !!mtd->_block_isbad;
+}
+
/* Kernel-side ioctl definitions */
extern int add_mtd_device(struct mtd_info *mtd);
@@ -269,12 +311,6 @@
extern void register_mtd_user (struct mtd_notifier *new);
extern int unregister_mtd_user (struct mtd_notifier *old);
-
-int default_mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
- unsigned long count, loff_t to, size_t *retlen);
-
-int default_mtd_readv(struct mtd_info *mtd, struct kvec *vecs,
- unsigned long count, loff_t from, size_t *retlen);
#endif
#ifdef CONFIG_MTD_PARTITIONS
@@ -296,17 +332,34 @@
#define MTD_DEBUG_LEVEL3 (3) /* Noisy */
#ifdef CONFIG_MTD_DEBUG
+#define pr_debug(args...) MTDDEBUG(MTD_DEBUG_LEVEL0, args)
#define MTDDEBUG(n, args...) \
do { \
if (n <= CONFIG_MTD_DEBUG_VERBOSE) \
printk(KERN_INFO args); \
} while(0)
#else /* CONFIG_MTD_DEBUG */
+#define pr_debug(args...)
#define MTDDEBUG(n, args...) \
do { \
if (0) \
printk(KERN_INFO args); \
} while(0)
#endif /* CONFIG_MTD_DEBUG */
+#define pr_info(args...) MTDDEBUG(MTD_DEBUG_LEVEL0, args)
+#define pr_warn(args...) MTDDEBUG(MTD_DEBUG_LEVEL0, args)
+#define pr_err(args...) MTDDEBUG(MTD_DEBUG_LEVEL0, args)
+
+static inline int mtd_is_bitflip(int err) {
+ return err == -EUCLEAN;
+}
+
+static inline int mtd_is_eccerr(int err) {
+ return err == -EBADMSG;
+}
+
+static inline int mtd_is_bitflip_or_eccerr(int err) {
+ return mtd_is_bitflip(err) || mtd_is_eccerr(err);
+}
#endif /* __MTD_MTD_H__ */
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 98bf255..2055584 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -46,7 +46,7 @@
* is supported now. If you add a chip with bigger oobsize/page
* adjust this accordingly.
*/
-#define NAND_MAX_OOBSIZE 576
+#define NAND_MAX_OOBSIZE 640
#define NAND_MAX_PAGESIZE 8192
/*
@@ -82,6 +82,8 @@
#define NAND_CMD_READID 0x90
#define NAND_CMD_ERASE2 0xd0
#define NAND_CMD_PARAM 0xec
+#define NAND_CMD_GET_FEATURES 0xee
+#define NAND_CMD_SET_FEATURES 0xef
#define NAND_CMD_RESET 0xff
#define NAND_CMD_LOCK 0x2a
@@ -142,7 +144,7 @@
#define NAND_ECC_READ 0
/* Reset Hardware ECC for write */
#define NAND_ECC_WRITE 1
-/* Enable Hardware ECC before syndrom is read back from flash */
+/* Enable Hardware ECC before syndrome is read back from flash */
#define NAND_ECC_READSYN 2
/* Bit mask for flags passed to do_nand_read_ecc */
@@ -153,9 +155,7 @@
* Option constants for bizarre disfunctionality and real
* features.
*/
-/* Chip can not auto increment pages */
-#define NAND_NO_AUTOINCR 0x00000001
-/* Buswitdh is 16 bit */
+/* Buswidth is 16 bit */
#define NAND_BUSWIDTH_16 0x00000002
/* Device supports partial programming without padding */
#define NAND_NO_PADDING 0x00000004
@@ -179,12 +179,6 @@
* This happens with the Renesas AG-AND chips, possibly others.
*/
#define BBT_AUTO_REFRESH 0x00000080
-/*
- * Chip does not require ready check on read. true
- * for all large page devices, as they do not support
- * autoincrement.
- */
-#define NAND_NO_READRDY 0x00000100
/* Chip does not allow subpage writes */
#define NAND_NO_SUBPAGE_WRITE 0x00000200
@@ -202,34 +196,21 @@
(NAND_NO_PADDING | NAND_CACHEPRG | NAND_COPYBACK)
/* Macros to identify the above */
-#define NAND_CANAUTOINCR(chip) (!(chip->options & NAND_NO_AUTOINCR))
#define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING))
#define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG))
#define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK))
#define NAND_HAS_SUBPAGE_READ(chip) ((chip->options & NAND_SUBPAGE_READ))
/* Non chip related options */
-/*
- * Use a flash based bad block table. OOB identifier is saved in OOB area.
- * This option is passed to the default bad block table function.
- */
-#define NAND_USE_FLASH_BBT 0x00010000
/* This option skips the bbt scan during initialization. */
-#define NAND_SKIP_BBTSCAN 0x00020000
+#define NAND_SKIP_BBTSCAN 0x00010000
/*
* This option is defined if the board driver allocates its own buffers
* (e.g. because it needs them DMA-coherent).
*/
-#define NAND_OWN_BUFFERS 0x00040000
+#define NAND_OWN_BUFFERS 0x00020000
/* Chip may not exist, so silence any errors in scan */
-#define NAND_SCAN_SILENT_NODEV 0x00080000
-/*
- * If passed additionally to NAND_USE_FLASH_BBT then BBT code will not touch
- * the OOB area.
- */
-#define NAND_USE_FLASH_BBT_NO_OOB 0x00800000
-/* Create an empty BBT with no vendor information if the BBT is available */
-#define NAND_CREATE_EMPTY_BBT 0x01000000
+#define NAND_SCAN_SILENT_NODEV 0x00040000
/* Options set by nand scan */
/* bbt has already been read */
@@ -244,6 +225,21 @@
/* Keep gcc happy */
struct nand_chip;
+/* ONFI timing mode, used in both asynchronous and synchronous mode */
+#define ONFI_TIMING_MODE_0 (1 << 0)
+#define ONFI_TIMING_MODE_1 (1 << 1)
+#define ONFI_TIMING_MODE_2 (1 << 2)
+#define ONFI_TIMING_MODE_3 (1 << 3)
+#define ONFI_TIMING_MODE_4 (1 << 4)
+#define ONFI_TIMING_MODE_5 (1 << 5)
+#define ONFI_TIMING_MODE_UNKNOWN (1 << 6)
+
+/* ONFI feature address */
+#define ONFI_FEATURE_ADDR_TIMING_MODE 0x1
+
+/* ONFI subfeature parameters length */
+#define ONFI_SUBFEATURE_PARAM_LEN 4
+
struct nand_onfi_params {
/* rev info and features block */
/* 'O' 'N' 'F' 'I' */
@@ -326,27 +322,32 @@
};
/**
- * struct nand_ecc_ctrl - Control structure for ecc
- * @mode: ecc mode
- * @steps: number of ecc steps per page
- * @size: data bytes per ecc step
- * @bytes: ecc bytes per step
- * @total: total number of ecc bytes per page
- * @prepad: padding information for syndrome based ecc generators
- * @postpad: padding information for syndrome based ecc generators
+ * struct nand_ecc_ctrl - Control structure for ECC
+ * @mode: ECC mode
+ * @steps: number of ECC steps per page
+ * @size: data bytes per ECC step
+ * @bytes: ECC bytes per step
+ * @strength: max number of correctible bits per ECC step
+ * @total: total number of ECC bytes per page
+ * @prepad: padding information for syndrome based ECC generators
+ * @postpad: padding information for syndrome based ECC generators
* @layout: ECC layout control struct pointer
- * @priv: pointer to private ecc control data
- * @hwctl: function to control hardware ecc generator. Must only
+ * @priv: pointer to private ECC control data
+ * @hwctl: function to control hardware ECC generator. Must only
* be provided if an hardware ECC is available
- * @calculate: function for ecc calculation or readback from ecc hardware
- * @correct: function for ecc correction, matching to ecc generator (sw/hw)
+ * @calculate: function for ECC calculation or readback from ECC hardware
+ * @correct: function for ECC correction, matching to ECC generator (sw/hw)
* @read_page_raw: function to read a raw page without ECC
* @write_page_raw: function to write a raw page without ECC
- * @read_page: function to read a page according to the ecc generator
+ * @read_page: function to read a page according to the ECC generator
+ * requirements; returns maximum number of bitflips corrected in
+ * any single ECC step, 0 if bitflips uncorrectable, -EIO hw error
+ * @read_subpage: function to read parts of the page covered by ECC;
+ * returns same as read_page()
+ * @write_page: function to write a page according to the ECC generator
* requirements.
- * @read_subpage: function to read parts of the page covered by ECC.
- * @write_page: function to write a page according to the ecc generator
- * requirements.
+ * @write_oob_raw: function to write chip OOB data without ECC
+ * @read_oob_raw: function to read chip OOB data without ECC
* @read_oob: function to read chip OOB data
* @write_oob: function to write chip OOB data
*/
@@ -356,6 +357,7 @@
int size;
int bytes;
int total;
+ int strength;
int prepad;
int postpad;
struct nand_ecclayout *layout;
@@ -366,25 +368,28 @@
int (*correct)(struct mtd_info *mtd, uint8_t *dat, uint8_t *read_ecc,
uint8_t *calc_ecc);
int (*read_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int page);
- void (*write_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf);
+ uint8_t *buf, int oob_required, int page);
+ int (*write_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required);
int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int page);
+ uint8_t *buf, int oob_required, int page);
int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
uint32_t offs, uint32_t len, uint8_t *buf);
- void (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf);
- int (*read_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page,
- int sndcmd);
+ int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required);
+ int (*write_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+ int page);
+ int (*read_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+ int page);
+ int (*read_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page);
int (*write_oob)(struct mtd_info *mtd, struct nand_chip *chip,
int page);
};
/**
* struct nand_buffers - buffer structure for read/write
- * @ecccalc: buffer for calculated ecc
- * @ecccode: buffer for ecc read from flash
+ * @ecccalc: buffer for calculated ECC
+ * @ecccode: buffer for ECC read from flash
* @databuf: buffer for data - dynamically sized
*
* Do not change the order of buffers. databuf and oobrbuf must be in
@@ -418,7 +423,7 @@
* mtd->oobsize, mtd->writesize and so on.
* @id_data contains the 8 bytes values of NAND_CMD_READID.
* Return with the bus width.
- * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accesing
+ * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accessing
* device ready/busy line. If set to NULL no access to
* ready/busy is available and the ready/busy information
* is read from the chip status register.
@@ -426,17 +431,17 @@
* commands to the chip.
* @waitfunc: [REPLACEABLE] hardwarespecific function for wait on
* ready.
- * @ecc: [BOARDSPECIFIC] ecc control ctructure
+ * @ecc: [BOARDSPECIFIC] ECC control structure
* @buffers: buffer structure for read/write
* @hwcontrol: platform-specific hardware control structure
- * @ops: oob operation operands
* @erase_cmd: [INTERN] erase command write function, selectable due
* to AND support.
* @scan_bbt: [REPLACEABLE] function to scan bad block table
* @chip_delay: [BOARDSPECIFIC] chip dependent delay for transferring
* data from array to read regs (tR).
* @state: [INTERN] the current state of the NAND device
- * @oob_poi: poison value buffer
+ * @oob_poi: "poison value buffer," used for laying out OOB data
+ * before writing
* @page_shift: [INTERN] number of address bits in a page (column
* address bits).
* @phys_erase_shift: [INTERN] number of address bits in a physical eraseblock
@@ -445,10 +450,14 @@
* @options: [BOARDSPECIFIC] various chip options. They can partly
* be set to inform nand_scan about special functionality.
* See the defines for further explanation.
+ * @bbt_options: [INTERN] bad block specific options. All options used
+ * here must come from bbm.h. By default, these options
+ * will be copied to the appropriate nand_bbt_descr's.
* @badblockpos: [INTERN] position of the bad block marker in the oob
* area.
- * @badblockbits: [INTERN] number of bits to left-shift the bad block
- * number
+ * @badblockbits: [INTERN] minimum number of set bits in a good block's
+ * bad block marker position; i.e., BBM == 11110111b is
+ * not bad when badblockbits == 7
* @cellinfo: [INTERN] MLC/multichip data from chip ident
* @numchips: [INTERN] number of physical chips
* @chipsize: [INTERN] the size of one chip for multichip arrays
@@ -460,7 +469,9 @@
* non 0 if ONFI supported.
* @onfi_params: [INTERN] holds the ONFI page parameter when ONFI is
* supported, 0 otherwise.
- * @ecclayout: [REPLACEABLE] the default ecc placement scheme
+ * @onfi_set_features [REPLACEABLE] set the features for ONFI nand
+ * @onfi_get_features [REPLACEABLE] get the features for ONFI nand
+ * @ecclayout: [REPLACEABLE] the default ECC placement scheme
* @bbt: [INTERN] bad block table pointer
* @bbt_td: [REPLACEABLE] bad block table descriptor for flash
* lookup.
@@ -468,9 +479,9 @@
* @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial
* bad block scan.
* @controller: [REPLACEABLE] a pointer to a hardware controller
- * structure which is shared among multiple independend
+ * structure which is shared among multiple independent
* devices.
- * @priv: [OPTIONAL] pointer to private chip date
+ * @priv: [OPTIONAL] pointer to private chip data
* @errstat: [OPTIONAL] hardware specific function to perform
* additional error status checks (determine if errors are
* correctable).
@@ -501,10 +512,16 @@
int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state,
int status, int page);
int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf, int page, int cached, int raw);
+ const uint8_t *buf, int oob_required, int page,
+ int cached, int raw);
+ int (*onfi_set_features)(struct mtd_info *mtd, struct nand_chip *chip,
+ int feature_addr, uint8_t *subfeature_para);
+ int (*onfi_get_features)(struct mtd_info *mtd, struct nand_chip *chip,
+ int feature_addr, uint8_t *subfeature_para);
int chip_delay;
unsigned int options;
+ unsigned int bbt_options;
int page_shift;
int phys_erase_shift;
@@ -534,8 +551,6 @@
struct nand_buffers *buffers;
struct nand_hw_control hwcontrol;
- struct mtd_oob_ops ops;
-
uint8_t *bbt;
struct nand_bbt_descr *bbt_td;
struct nand_bbt_descr *bbt_md;
@@ -557,6 +572,8 @@
#define NAND_MFR_HYNIX 0xad
#define NAND_MFR_MICRON 0x2c
#define NAND_MFR_AMD 0x01
+#define NAND_MFR_MACRONIX 0xc2
+#define NAND_MFR_EON 0x92
/**
* struct nand_flash_dev - NAND Flash Device ID Structure
@@ -615,9 +632,9 @@
* @partitions: mtd partition list
* @chip_delay: R/B delay value in us
* @options: Option flags, e.g. 16bit buswidth
- * @ecclayout: ecc layout info structure
+ * @bbt_options: BBT option flags, e.g. NAND_BBT_USE_FLASH
+ * @ecclayout: ECC layout info structure
* @part_probe_types: NULL-terminated array of probe types
- * @priv: hardware controller specific settings
*/
struct platform_nand_chip {
int nr_chips;
@@ -627,8 +644,8 @@
struct nand_ecclayout *ecclayout;
int chip_delay;
unsigned int options;
+ unsigned int bbt_options;
const char **part_probe_types;
- void *priv;
};
/* Keep gcc happy */
@@ -650,6 +667,7 @@
int (*dev_ready)(struct mtd_info *mtd);
void (*select_chip)(struct mtd_info *mtd, int chip);
void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
+ unsigned char (*read_byte)(struct mtd_info *mtd);
void *priv;
};
@@ -679,4 +697,23 @@
void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len);
uint8_t nand_read_byte(struct mtd_info *mtd);
+/* return the supported asynchronous timing mode. */
+
+#ifdef CONFIG_SYS_NAND_ONFI_DETECTION
+static inline int onfi_get_async_timing_mode(struct nand_chip *chip)
+{
+ if (!chip->onfi_version)
+ return ONFI_TIMING_MODE_UNKNOWN;
+ return le16_to_cpu(chip->onfi_params.async_timing_mode);
+}
+
+/* return the supported synchronous timing mode. */
+static inline int onfi_get_sync_timing_mode(struct nand_chip *chip)
+{
+ if (!chip->onfi_version)
+ return ONFI_TIMING_MODE_UNKNOWN;
+ return le16_to_cpu(chip->onfi_params.src_sync_timing_mode);
+}
+#endif
+
#endif /* __LINUX_MTD_NAND_H */
diff --git a/include/linux/string.h b/include/linux/string.h
index e9b134d..8e44855 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -85,6 +85,9 @@
#ifndef __HAVE_ARCH_MEMCHR
extern void * memchr(const void *,int,__kernel_size_t);
#endif
+#ifndef __HAVE_ARCH_MEMCHR_INV
+void *memchr_inv(const void *, int, size_t);
+#endif
#ifdef __cplusplus
}
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index d1d732c..bd48704 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -35,6 +35,7 @@
#include <linux/types.h> /* __u8 etc */
#include <asm/byteorder.h> /* le16_to_cpu */
+#include <asm/unaligned.h> /* get_unaligned() */
/*-------------------------------------------------------------------------*/
@@ -596,7 +597,7 @@
*/
static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd)
{
- return __le16_to_cpu(epd->wMaxPacketSize);
+ return __le16_to_cpu(get_unaligned(&epd->wMaxPacketSize));
}
static inline int usb_endpoint_interrupt_type(
diff --git a/include/mtd/cfi_flash.h b/include/mtd/cfi_flash.h
index 966b5e0..b644b91 100644
--- a/include/mtd/cfi_flash.h
+++ b/include/mtd/cfi_flash.h
@@ -129,12 +129,16 @@
} cfiword_t;
/* CFI standard query structure */
+/* The offsets and sizes of this packed structure members correspond
+ * to the actual layout in CFI Flash chips. Some 16- and 32-bit members
+ * are unaligned and must be accessed with explicit unaligned access macros.
+ */
struct cfi_qry {
u8 qry[3];
- u16 p_id;
- u16 p_adr;
- u16 a_id;
- u16 a_adr;
+ u16 p_id; /* unaligned */
+ u16 p_adr; /* unaligned */
+ u16 a_id; /* unaligned */
+ u16 a_adr; /* unaligned */
u8 vcc_min;
u8 vcc_max;
u8 vpp_min;
@@ -148,10 +152,10 @@
u8 block_erase_timeout_max;
u8 chip_erase_timeout_max;
u8 dev_size;
- u16 interface_desc;
- u16 max_buf_write_size;
+ u16 interface_desc; /* aligned */
+ u16 max_buf_write_size; /* aligned */
u8 num_erase_regions;
- u32 erase_region_info[NUM_ERASE_REGIONS];
+ u32 erase_region_info[NUM_ERASE_REGIONS]; /* unaligned */
} __attribute__((packed));
struct cfi_pri_hdr {
diff --git a/include/linux/mtd/mtd-abi.h b/include/mtd/mtd-abi.h
similarity index 65%
rename from include/linux/mtd/mtd-abi.h
rename to include/mtd/mtd-abi.h
index 8bdd231..d51c1ab 100644
--- a/include/linux/mtd/mtd-abi.h
+++ b/include/mtd/mtd-abi.h
@@ -24,6 +24,25 @@
unsigned char __user *ptr;
};
+/*
+ * MTD operation modes
+ *
+ * @MTD_OPS_PLACE_OOB: OOB data are placed at the given offset (default)
+ * @MTD_OPS_AUTO_OOB: OOB data are automatically placed at the free areas
+ * which are defined by the internal ecclayout
+ * @MTD_OPS_RAW: data are transferred as-is, with no error correction;
+ * this mode implies %MTD_OPS_PLACE_OOB
+ *
+ * These modes can be passed to ioctl(MEMWRITE) and are also used internally.
+ * See notes on "MTD file modes" for discussion on %MTD_OPS_RAW vs.
+ * %MTD_FILE_MODE_RAW.
+ */
+enum {
+ MTD_OPS_PLACE_OOB = 0,
+ MTD_OPS_AUTO_OOB = 1,
+ MTD_OPS_RAW = 2,
+};
+
#define MTD_ABSENT 0
#define MTD_RAM 1
#define MTD_ROM 2
@@ -82,24 +101,42 @@
uint32_t locked;
};
+/* Get basic MTD characteristics info (better to use sysfs) */
#define MEMGETINFO _IOR('M', 1, struct mtd_info_user)
+/* Erase segment of MTD */
#define MEMERASE _IOW('M', 2, struct erase_info_user)
+/* Write out-of-band data from MTD */
#define MEMWRITEOOB _IOWR('M', 3, struct mtd_oob_buf)
+/* Read out-of-band data from MTD */
#define MEMREADOOB _IOWR('M', 4, struct mtd_oob_buf)
+/* Lock a chip (for MTD that supports it) */
#define MEMLOCK _IOW('M', 5, struct erase_info_user)
+/* Unlock a chip (for MTD that supports it) */
#define MEMUNLOCK _IOW('M', 6, struct erase_info_user)
+/* Get the number of different erase regions */
#define MEMGETREGIONCOUNT _IOR('M', 7, int)
+/* Get information about the erase region for a specific index */
#define MEMGETREGIONINFO _IOWR('M', 8, struct region_info_user)
+/* Get info about OOB modes (e.g., RAW, PLACE, AUTO) - legacy interface */
#define MEMSETOOBSEL _IOW('M', 9, struct nand_oobinfo)
#define MEMGETOOBSEL _IOR('M', 10, struct nand_oobinfo)
+/* Check if an eraseblock is bad */
#define MEMGETBADBLOCK _IOW('M', 11, loff_t)
+/* Mark an eraseblock as bad */
#define MEMSETBADBLOCK _IOW('M', 12, loff_t)
+/* Set OTP (One-Time Programmable) mode (factory vs. user) */
#define OTPSELECT _IOR('M', 13, int)
+/* Get number of OTP (One-Time Programmable) regions */
#define OTPGETREGIONCOUNT _IOW('M', 14, int)
+/* Get all OTP (One-Time Programmable) info about MTD */
#define OTPGETREGIONINFO _IOW('M', 15, struct otp_info)
+/* Lock a given range of user data (must be in mode %MTD_FILE_MODE_OTP_USER) */
#define OTPLOCK _IOR('M', 16, struct otp_info)
+/* Get ECC layout (deprecated) */
#define ECCGETLAYOUT _IOR('M', 17, struct nand_ecclayout)
+/* Get statistics about corrected/uncorrected errors */
#define ECCGETSTATS _IOR('M', 18, struct mtd_ecc_stats)
+/* Set MTD mode on a per-file-descriptor basis (see "MTD file modes") */
#define MTDFILEMODE _IO('M', 19)
/*
@@ -146,7 +183,21 @@
};
/*
- * Read/write file modes for access to MTD
+ * MTD file modes - for read/write access to MTD
+ *
+ * @MTD_FILE_MODE_NORMAL: OTP disabled, ECC enabled
+ * @MTD_FILE_MODE_OTP_FACTORY: OTP enabled in factory mode
+ * @MTD_FILE_MODE_OTP_USER: OTP enabled in user mode
+ * @MTD_FILE_MODE_RAW: OTP disabled, ECC disabled
+ *
+ * These modes can be set via ioctl(MTDFILEMODE). The mode mode will be retained
+ * separately for each open file descriptor.
+ *
+ * Note: %MTD_FILE_MODE_RAW provides the same functionality as %MTD_OPS_RAW -
+ * raw access to the flash, without error correction or autoplacement schemes.
+ * Wherever possible, the MTD_OPS_* mode will override the MTD_FILE_MODE_* mode
+ * (e.g., when using ioctl(MEMWRITE)), but in some cases, the MTD_FILE_MODE is
+ * used out of necessity (e.g., `write()', ioctl(MEMWRITEOOB64)).
*/
enum mtd_file_modes {
MTD_MODE_NORMAL = MTD_OTP_OFF,
diff --git a/include/nand.h b/include/nand.h
index f0f3bf9..26190e4 100644
--- a/include/nand.h
+++ b/include/nand.h
@@ -31,7 +31,8 @@
* at the same time, so do it here. When all drivers are
* converted, this will go away.
*/
-#if defined(CONFIG_NAND_FSL_ELBC) || defined(CONFIG_NAND_ATMEL)
+#if defined(CONFIG_NAND_FSL_ELBC) || defined(CONFIG_NAND_ATMEL)\
+ || defined(CONFIG_NAND_FSL_IFC)
#define CONFIG_SYS_NAND_SELF_INIT
#endif
@@ -55,17 +56,17 @@
static inline int nand_read(nand_info_t *info, loff_t ofs, size_t *len, u_char *buf)
{
- return info->read(info, ofs, *len, (size_t *)len, buf);
+ return mtd_read(info, ofs, *len, (size_t *)len, buf);
}
static inline int nand_write(nand_info_t *info, loff_t ofs, size_t *len, u_char *buf)
{
- return info->write(info, ofs, *len, (size_t *)len, buf);
+ return mtd_write(info, ofs, *len, (size_t *)len, buf);
}
static inline int nand_block_isbad(nand_info_t *info, loff_t ofs)
{
- return info->block_isbad(info, ofs);
+ return mtd_block_isbad(info, ofs);
}
static inline int nand_erase(nand_info_t *info, loff_t off, size_t size)
@@ -77,7 +78,7 @@
instr.len = size;
instr.callback = 0;
- return info->erase(info, &instr);
+ return mtd_erase(info, &instr);
}
diff --git a/include/net.h b/include/net.h
index 970d4d1..23fb947 100644
--- a/include/net.h
+++ b/include/net.h
@@ -695,6 +695,9 @@
/* get a random source port */
extern unsigned int random_port(void);
+/* Update U-Boot over TFTP */
+extern int update_tftp(ulong addr);
+
/**********************************************************************/
#endif /* __NET_H__ */
diff --git a/include/netdev.h b/include/netdev.h
index 3bcb337..df454b5 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -103,7 +103,7 @@
int txpp, int rxpp);
int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags,
unsigned long ctrl_addr);
-int zynq_gem_initialize(bd_t *bis, int base_addr);
+int zynq_gem_initialize(bd_t *bis, int base_addr, int phy_addr, u32 emio);
/*
* As long as the Xilinx xps_ll_temac ethernet driver has not its own interface
* exported by a public hader file, we need a global definition at this point.
diff --git a/include/palmas.h b/include/palmas.h
new file mode 100644
index 0000000..aff48b5
--- /dev/null
+++ b/include/palmas.h
@@ -0,0 +1,134 @@
+/*
+ * (C) Copyright 2012-2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef PALMAS_H
+#define PALMAS_H
+
+#include <common.h>
+#include <i2c.h>
+
+/* I2C chip addresses, TW6035/37 */
+#define TWL603X_CHIP_P1 0x48 /* Page 1 */
+#define TWL603X_CHIP_P2 0x49 /* Page 2 */
+#define TWL603X_CHIP_P3 0x4a /* Page 3 */
+
+/* TPS659038/39 */
+#define TPS65903X_CHIP_P1 0x58 /* Page 1 */
+
+/* Page 1 registers (0x1XY translates to page 1, reg addr 0xXY): */
+
+/* LDO1 control/voltage */
+#define LDO1_CTRL 0x50
+#define LDO1_VOLTAGE 0x51
+
+/* LDO9 control/voltage */
+#define LDO9_CTRL 0x60
+#define LDO9_VOLTAGE 0x61
+
+/* LDOUSB control/voltage */
+#define LDOUSB_CTRL 0x64
+#define LDOUSB_VOLTAGE 0x65
+
+/* Control of 32 kHz audio clock */
+#define CLK32KGAUDIO_CTRL 0xd5
+
+/* SYSEN2_CTRL for VCC_3v3_AUX supply on the sEVM */
+#define SYSEN2_CTRL 0xd9
+
+/*
+ * Bit field definitions for LDOx_CTRL, SYSENx_CTRL
+ * and some other xxx_CTRL resources:
+ */
+#define LDO9_BYP_EN (1 << 6) /* LDO9 only! */
+#define RSC_STAT_ON (1 << 4) /* RO status bit! */
+#define RSC_MODE_SLEEP (1 << 2)
+#define RSC_MODE_ACTIVE (1 << 0)
+
+/* Some LDO voltage values */
+#define LDO_VOLT_OFF 0
+#define LDO_VOLT_1V8 0x13
+#define LDO_VOLT_3V0 0x2b
+#define LDO_VOLT_3V3 0x31
+/* Request bypass, LDO9 only */
+#define LDO9_BYPASS 0x3f
+
+/* SMPS7_CTRL */
+#define SMPS7_CTRL 0x30
+
+/* SMPS9_CTRL */
+#define SMPS9_CTRL 0x38
+#define SMPS9_VOLTAGE 0x3b
+
+/* Bit field definitions for SMPSx_CTRL */
+#define SMPS_MODE_ACT_AUTO 1
+#define SMPS_MODE_ACT_ECO 2
+#define SMPS_MODE_ACT_FPWM 3
+#define SMPS_MODE_SLP_AUTO (1 << 2)
+#define SMPS_MODE_SLP_ECO (2 << 2)
+#define SMPS_MODE_SLP_FPWM (3 << 2)
+
+/*
+ * Some popular SMPS voltages, all with RANGE=1; note
+ * that RANGE cannot be changed on the fly
+ */
+#define SMPS_VOLT_OFF 0
+#define SMPS_VOLT_1V2 0x90
+#define SMPS_VOLT_1V8 0xae
+#define SMPS_VOLT_2V1 0xbd
+#define SMPS_VOLT_3V0 0xea
+#define SMPS_VOLT_3V3 0xf9
+
+/* Backup Battery & VRTC Control */
+#define BB_VRTC_CTRL 0xa8
+/* Bit definitions for BB_VRTC_CTRL */
+#define VRTC_EN_SLP (1 << 6)
+#define VRTC_EN_OFF (1 << 5)
+#define VRTC_PWEN (1 << 4)
+#define BB_LOW_ICHRG (1 << 3)
+#define BB_HIGH_ICHRG (0 << 3)
+#define BB_VSEL_3V0 (0 << 1)
+#define BB_VSEL_2V5 (1 << 1)
+#define BB_VSEL_3V15 (2 << 1)
+#define BB_VSEL_VBAT (3 << 1)
+#define BB_CHRG_EN (1 << 0)
+
+/*
+ * Functions to read and write from TPS659038/TWL6035/TWL6037
+ * or other Palmas family of TI PMICs
+ */
+static inline int palmas_i2c_write_u8(u8 chip_no, u8 reg, u8 val)
+{
+ return i2c_write(chip_no, reg, 1, &val, 1);
+}
+
+static inline int palmas_i2c_read_u8(u8 chip_no, u8 reg, u8 *val)
+{
+ return i2c_read(chip_no, reg, 1, val, 1);
+}
+
+void palmas_init_settings(void);
+int palmas_mmc1_poweron_ldo(void);
+int twl603x_mmc1_set_ldo9(u8 vsel);
+int twl603x_audio_power(u8 on);
+int twl603x_enable_bb_charge(u8 bb_fields);
+
+#endif /* PALMAS_H */
diff --git a/include/pci.h b/include/pci.h
index 15f583f..f9c5148 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -569,7 +569,9 @@
hose->write_dword = write_dword;
}
+#ifdef CONFIG_PCI_INDIRECT_BRIDGE
extern void pci_setup_indirect(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data);
+#endif
extern phys_addr_t pci_hose_bus_to_phys(struct pci_controller* hose,
pci_addr_t addr, unsigned long flags);
diff --git a/include/phy.h b/include/phy.h
index 44d5eaf..75bf3b4 100644
--- a/include/phy.h
+++ b/include/phy.h
@@ -225,6 +225,7 @@
int phy_atheros_init(void);
int phy_broadcom_init(void);
int phy_davicom_init(void);
+int phy_et1011c_init(void);
int phy_lxt_init(void);
int phy_marvell_init(void);
int phy_micrel_init(void);
diff --git a/include/spl.h b/include/spl.h
index b40be80..4bc1dd1 100644
--- a/include/spl.h
+++ b/include/spl.h
@@ -44,7 +44,6 @@
#define SPL_COPY_PAYLOAD_ONLY 1
extern struct spl_image_info spl_image;
-extern u32 *boot_params_ptr;
/* SPL common functions */
void preloader_console_init(void);
diff --git a/include/twl4030.h b/include/twl4030.h
index 5aa1841..569ad27 100644
--- a/include/twl4030.h
+++ b/include/twl4030.h
@@ -638,12 +638,12 @@
* examples are TWL4030_PM_RECEIVER_VMMC1_DEV_GRP and
* TWL4030_LED_LEDEN.
*/
-static inline int twl4030_i2c_write_u8(u8 chip_no, u8 val, u8 reg)
+static inline int twl4030_i2c_write_u8(u8 chip_no, u8 reg, u8 val)
{
return i2c_write(chip_no, reg, 1, &val, 1);
}
-static inline int twl4030_i2c_read_u8(u8 chip_no, u8 *val, u8 reg)
+static inline int twl4030_i2c_read_u8(u8 chip_no, u8 reg, u8 *val)
{
return i2c_read(chip_no, reg, 1, val, 1);
}
diff --git a/include/twl6030.h b/include/twl6030.h
index a9fcadb..029b21f 100644
--- a/include/twl6030.h
+++ b/include/twl6030.h
@@ -21,6 +21,9 @@
* MA 02111-1307 USA
*/
+#ifndef TWL6030_H
+#define TWL6030_H
+
#include <common.h>
#include <i2c.h>
@@ -126,6 +129,17 @@
#define GPCH0_LSB 0x57
#define GPCH0_MSB 0x58
+/* Functions to read and write from TWL6030 */
+static inline int twl6030_i2c_write_u8(u8 chip_no, u8 reg, u8 val)
+{
+ return i2c_write(chip_no, reg, 1, &val, 1);
+}
+
+static inline int twl6030_i2c_read_u8(u8 chip_no, u8 reg, u8 *val)
+{
+ return i2c_read(chip_no, reg, 1, val, 1);
+}
+
void twl6030_init_battery_charging(void);
void twl6030_usb_device_settings(void);
void twl6030_start_usb_charging(void);
@@ -133,3 +147,5 @@
int twl6030_get_battery_voltage(void);
int twl6030_get_battery_current(void);
void twl6030_power_mmc_init(void);
+
+#endif /* TWL6030_H */
diff --git a/include/twl6035.h b/include/twl6035.h
deleted file mode 100644
index ce74348..0000000
--- a/include/twl6035.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * (C) Copyright 2012
- * Texas Instruments, <www.ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <i2c.h>
-
-/* I2C chip addresses */
-#define TWL6035_CHIP_ADDR 0x48
-
-/* 0x1XY translates to page 1, register address 0xXY */
-#define LDO9_CTRL 0x60
-#define LDO9_VOLTAGE 0x61
-
-/* Bit field definitions for LDOx_CTRL */
-#define LDO_ON (1 << 4)
-#define LDO_MODE_SLEEP (1 << 2)
-#define LDO_MODE_ACTIVE (1 << 0)
-
-int twl6035_i2c_write_u8(u8 chip_no, u8 val, u8 reg);
-int twl6035_i2c_read_u8(u8 chip_no, u8 *val, u8 reg);
-void twl6035_init_settings(void);
-int twl6035_mmc1_poweron_ldo(void);
diff --git a/include/usb/ehci-fsl.h b/include/usb/ehci-fsl.h
index a1438d6..29b136d 100644
--- a/include/usb/ehci-fsl.h
+++ b/include/usb/ehci-fsl.h
@@ -277,10 +277,4 @@
/* Board-specific initialization */
int board_ehci_hcd_init(int port);
-/* CPU-specific abstracted-out IOMUX init */
-#ifdef CONFIG_MX51
-void setup_iomux_usb_h1(void);
-void setup_iomux_usb_h2(void);
-#endif
-
#endif /* _EHCI_FSL_H */
diff --git a/include/usb/fotg210.h b/include/usb/fotg210.h
new file mode 100644
index 0000000..2d2d243
--- /dev/null
+++ b/include/usb/fotg210.h
@@ -0,0 +1,364 @@
+/*
+ * Faraday USB 2.0 OTG Controller
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#ifndef _FOTG210_H
+#define _FOTG210_H
+
+struct fotg210_regs {
+ /* USB Host Controller */
+ struct {
+ uint32_t data[4];
+ } hccr; /* 0x00 - 0x0f: hccr */
+ struct {
+ uint32_t data[9];
+ } hcor; /* 0x10 - 0x33: hcor */
+ uint32_t rsvd1[3];
+ uint32_t miscr; /* 0x40: Miscellaneous Register */
+ uint32_t rsvd2[15];
+ /* USB OTG Controller */
+ uint32_t otgcsr;/* 0x80: OTG Control Status Register */
+ uint32_t otgisr;/* 0x84: OTG Interrupt Status Register */
+ uint32_t otgier;/* 0x88: OTG Interrupt Enable Register */
+ uint32_t rsvd3[13];
+ uint32_t isr; /* 0xC0: Global Interrupt Status Register */
+ uint32_t imr; /* 0xC4: Global Interrupt Mask Register */
+ uint32_t rsvd4[14];
+ /* USB Device Controller */
+ uint32_t dev_ctrl;/* 0x100: Device Control Register */
+ uint32_t dev_addr;/* 0x104: Device Address Register */
+ uint32_t dev_test;/* 0x108: Device Test Register */
+ uint32_t sof_fnr; /* 0x10c: SOF Frame Number Register */
+ uint32_t sof_mtr; /* 0x110: SOF Mask Timer Register */
+ uint32_t phy_tmsr;/* 0x114: PHY Test Mode Selector Register */
+ uint32_t rsvd5[2];
+ uint32_t cxfifo;/* 0x120: CX FIFO Register */
+ uint32_t idle; /* 0x124: IDLE Counter Register */
+ uint32_t rsvd6[2];
+ uint32_t gimr; /* 0x130: Group Interrupt Mask Register */
+ uint32_t gimr0; /* 0x134: Group Interrupt Mask Register 0 */
+ uint32_t gimr1; /* 0x138: Group Interrupt Mask Register 1 */
+ uint32_t gimr2; /* 0x13c: Group Interrupt Mask Register 2 */
+ uint32_t gisr; /* 0x140: Group Interrupt Status Register */
+ uint32_t gisr0; /* 0x144: Group Interrupt Status Register 0 */
+ uint32_t gisr1; /* 0x148: Group Interrupt Status Register 1 */
+ uint32_t gisr2; /* 0x14c: Group Interrupt Status Register 2 */
+ uint32_t rxzlp; /* 0x150: Receive Zero-Length-Packet Register */
+ uint32_t txzlp; /* 0x154: Transfer Zero-Length-Packet Register */
+ uint32_t isoeasr;/* 0x158: ISOC Error/Abort Status Register */
+ uint32_t rsvd7[1];
+ uint32_t iep[8]; /* 0x160 - 0x17f: IN Endpoint Register */
+ uint32_t oep[8]; /* 0x180 - 0x19f: OUT Endpoint Register */
+ uint32_t epmap14;/* 0x1a0: Endpoint Map Register (EP1 ~ 4) */
+ uint32_t epmap58;/* 0x1a4: Endpoint Map Register (EP5 ~ 8) */
+ uint32_t fifomap;/* 0x1a8: FIFO Map Register */
+ uint32_t fifocfg; /* 0x1ac: FIFO Configuration Register */
+ uint32_t fifocsr[4];/* 0x1b0 - 0x1bf: FIFO Control Status Register */
+ uint32_t dma_fifo; /* 0x1c0: DMA Target FIFO Register */
+ uint32_t rsvd8[1];
+ uint32_t dma_ctrl; /* 0x1c8: DMA Control Register */
+ uint32_t dma_addr; /* 0x1cc: DMA Address Register */
+ uint32_t ep0_data; /* 0x1d0: EP0 Setup Packet PIO Register */
+};
+
+/* Miscellaneous Register */
+#define MISCR_SUSPEND (1 << 6) /* Put transceiver in suspend mode */
+#define MISCR_EOF2(x) (((x) & 0x3) << 4) /* EOF 2 Timing */
+#define MISCR_EOF1(x) (((x) & 0x3) << 2) /* EOF 1 Timing */
+#define MISCR_ASST(x) (((x) & 0x3) << 0) /* Async. Sched. Sleep Timer */
+
+/* OTG Control Status Register */
+#define OTGCSR_SPD_HIGH (2 << 22) /* Speed of the attached device (host) */
+#define OTGCSR_SPD_LOW (1 << 22)
+#define OTGCSR_SPD_FULL (0 << 22)
+#define OTGCSR_SPD_MASK (3 << 22)
+#define OTGCSR_SPD_SHIFT 22
+#define OTGCSR_SPD(x) (((x) >> 22) & 0x03)
+#define OTGCSR_DEV_A (0 << 21) /* Acts as A-device */
+#define OTGCSR_DEV_B (1 << 21) /* Acts as B-device */
+#define OTGCSR_ROLE_H (0 << 20) /* Acts as Host */
+#define OTGCSR_ROLE_D (1 << 20) /* Acts as Device */
+#define OTGCSR_A_VBUS_VLD (1 << 19) /* A-device VBUS Valid */
+#define OTGCSR_A_SESS_VLD (1 << 18) /* A-device Session Valid */
+#define OTGCSR_B_SESS_VLD (1 << 17) /* B-device Session Valid */
+#define OTGCSR_B_SESS_END (1 << 16) /* B-device Session End */
+#define OTGCSR_HFT_LONG (1 << 11) /* HDISCON noise filter = 270 us*/
+#define OTGCSR_HFT (0 << 11) /* HDISCON noise filter = 135 us*/
+#define OTGCSR_VFT_LONG (1 << 10) /* VBUS noise filter = 472 us*/
+#define OTGCSR_VFT (0 << 10) /* VBUS noise filter = 135 us*/
+#define OTGCSR_IDFT_LONG (1 << 9) /* ID noise filter = 4 ms*/
+#define OTGCSR_IDFT (0 << 9) /* ID noise filter = 3 ms*/
+#define OTGCSR_A_SRPR_VBUS (0 << 8) /* A-device: SRP responds to VBUS */
+#define OTGCSR_A_SRPR_DATA (1 << 8) /* A-device: SRP responds to DATA-LINE */
+#define OTGCSR_A_SRP_EN (1 << 7) /* A-device SRP detection enabled */
+#define OTGCSR_A_HNP (1 << 6) /* Set role=A-device with HNP enabled */
+#define OTGCSR_A_BUSDROP (1 << 5) /* A-device drop bus (power-down) */
+#define OTGCSR_A_BUSREQ (1 << 4) /* A-device request bus */
+#define OTGCSR_B_VBUS_DISC (1 << 2) /* B-device discharges VBUS */
+#define OTGCSR_B_HNP (1 << 1) /* B-device enable HNP */
+#define OTGCSR_B_BUSREQ (1 << 0) /* B-device request bus */
+
+/* OTG Interrupt Status Register */
+#define OTGISR_APRM (1 << 12) /* Mini-A plug removed */
+#define OTGISR_BPRM (1 << 11) /* Mini-B plug removed */
+#define OTGISR_OVD (1 << 10) /* over-current detected */
+#define OTGISR_IDCHG (1 << 9) /* ID(A/B) changed */
+#define OTGISR_RLCHG (1 << 8) /* Role(Host/Device) changed */
+#define OTGISR_BSESSEND (1 << 6) /* B-device Session End */
+#define OTGISR_AVBUSERR (1 << 5) /* A-device VBUS Error */
+#define OTGISR_ASRP (1 << 4) /* A-device SRP detected */
+#define OTGISR_BSRP (1 << 0) /* B-device SRP complete */
+
+/* OTG Interrupt Enable Register */
+#define OTGIER_APRM (1 << 12) /* Mini-A plug removed */
+#define OTGIER_BPRM (1 << 11) /* Mini-B plug removed */
+#define OTGIER_OVD (1 << 10) /* over-current detected */
+#define OTGIER_IDCHG (1 << 9) /* ID(A/B) changed */
+#define OTGIER_RLCHG (1 << 8) /* Role(Host/Device) changed */
+#define OTGIER_BSESSEND (1 << 6) /* B-device Session End */
+#define OTGIER_AVBUSERR (1 << 5) /* A-device VBUS Error */
+#define OTGIER_ASRP (1 << 4) /* A-device SRP detected */
+#define OTGIER_BSRP (1 << 0) /* B-device SRP complete */
+
+/* Global Interrupt Status Register (W1C) */
+#define ISR_HOST (1 << 2) /* USB Host interrupt */
+#define ISR_OTG (1 << 1) /* USB OTG interrupt */
+#define ISR_DEV (1 << 0) /* USB Device interrupt */
+#define ISR_MASK 0x07
+
+/* Global Interrupt Mask Register */
+#define IMR_IRQLH (1 << 3) /* Interrupt triggered at level-high */
+#define IMR_IRQLL (0 << 3) /* Interrupt triggered at level-low */
+#define IMR_HOST (1 << 2) /* USB Host interrupt */
+#define IMR_OTG (1 << 1) /* USB OTG interrupt */
+#define IMR_DEV (1 << 0) /* USB Device interrupt */
+#define IMR_MASK 0x0f
+
+/* Device Control Register */
+#define DEVCTRL_FS_FORCED (1 << 9) /* Forced to be Full-Speed Mode */
+#define DEVCTRL_HS (1 << 6) /* High Speed Mode */
+#define DEVCTRL_FS (0 << 6) /* Full Speed Mode */
+#define DEVCTRL_EN (1 << 5) /* Chip Enable */
+#define DEVCTRL_RESET (1 << 4) /* Chip Software Reset */
+#define DEVCTRL_SUSPEND (1 << 3) /* Enter Suspend Mode */
+#define DEVCTRL_GIRQ_EN (1 << 2) /* Global Interrupt Enabled */
+#define DEVCTRL_HALFSPD (1 << 1) /* Half speed mode for FPGA test */
+#define DEVCTRL_RWAKEUP (1 << 0) /* Enable remote wake-up */
+
+/* Device Address Register */
+#define DEVADDR_CONF (1 << 7) /* SET_CONFIGURATION has been executed */
+#define DEVADDR_ADDR(x) ((x) & 0x7f)
+#define DEVADDR_ADDR_MASK 0x7f
+
+/* Device Test Register */
+#define DEVTEST_NOSOF (1 << 6) /* Do not generate SOF */
+#define DEVTEST_TST_MODE (1 << 5) /* Enter Test Mode */
+#define DEVTEST_TST_NOTS (1 << 4) /* Do not toggle sequence */
+#define DEVTEST_TST_NOCRC (1 << 3) /* Do not append CRC */
+#define DEVTEST_TST_CLREA (1 << 2) /* Clear External Side Address */
+#define DEVTEST_TST_CXLP (1 << 1) /* EP0 loopback test */
+#define DEVTEST_TST_CLRFF (1 << 0) /* Clear FIFO */
+
+/* SOF Frame Number Register */
+#define SOFFNR_UFN(x) (((x) >> 11) & 0x7) /* SOF Micro-Frame Number */
+#define SOFFNR_FNR(x) ((x) & 0x7ff) /* SOF Frame Number */
+
+/* SOF Mask Timer Register */
+#define SOFMTR_TMR(x) ((x) & 0xffff)
+
+/* PHY Test Mode Selector Register */
+#define PHYTMSR_TST_PKT (1 << 4) /* Packet send test */
+#define PHYTMSR_TST_SE0NAK (1 << 3) /* High-Speed quiescent state */
+#define PHYTMSR_TST_KSTA (1 << 2) /* High-Speed K state */
+#define PHYTMSR_TST_JSTA (1 << 1) /* High-Speed J state */
+#define PHYTMSR_UNPLUG (1 << 0) /* Enable soft-detachment */
+
+/* CX FIFO Register */
+#define CXFIFO_BYTES(x) (((x) >> 24) & 0x7f) /* CX/EP0 FIFO byte count */
+#define CXFIFO_FIFOE(x) (1 << (((x) & 0x03) + 8)) /* EPx FIFO empty */
+#define CXFIFO_FIFOE_FIFO0 (1 << 8)
+#define CXFIFO_FIFOE_FIFO1 (1 << 9)
+#define CXFIFO_FIFOE_FIFO2 (1 << 10)
+#define CXFIFO_FIFOE_FIFO3 (1 << 11)
+#define CXFIFO_FIFOE_MASK (0x0f << 8)
+#define CXFIFO_CXFIFOE (1 << 5) /* CX FIFO empty */
+#define CXFIFO_CXFIFOF (1 << 4) /* CX FIFO full */
+#define CXFIFO_CXFIFOCLR (1 << 3) /* CX FIFO clear */
+#define CXFIFO_CXSTALL (1 << 2) /* CX Stall */
+#define CXFIFO_TSTPKTFIN (1 << 1) /* Test packet data transfer finished */
+#define CXFIFO_CXFIN (1 << 0) /* CX data transfer finished */
+
+/* IDLE Counter Register */
+#define IDLE_MS(x) ((x) & 0x07) /* PHY suspend delay = x ms */
+
+/* Group Interrupt Mask(Disable) Register */
+#define GIMR_GRP2 (1 << 2) /* Disable interrupt group 2 */
+#define GIMR_GRP1 (1 << 1) /* Disable interrupt group 1 */
+#define GIMR_GRP0 (1 << 0) /* Disable interrupt group 0 */
+#define GIMR_MASK 0x07
+
+/* Group Interrupt Mask(Disable) Register 0 (CX) */
+#define GIMR0_CXABORT (1 << 5) /* CX command abort interrupt */
+#define GIMR0_CXERR (1 << 4) /* CX command error interrupt */
+#define GIMR0_CXEND (1 << 3) /* CX command end interrupt */
+#define GIMR0_CXOUT (1 << 2) /* EP0-OUT packet interrupt */
+#define GIMR0_CXIN (1 << 1) /* EP0-IN packet interrupt */
+#define GIMR0_CXSETUP (1 << 0) /* EP0-SETUP packet interrupt */
+#define GIMR0_MASK 0x3f
+
+/* Group Interrupt Mask(Disable) Register 1 (FIFO) */
+#define GIMR1_FIFO_IN(x) (1 << (((x) & 3) + 16)) /* FIFOx IN */
+#define GIMR1_FIFO_TX(x) GIMR1_FIFO_IN(x)
+#define GIMR1_FIFO_OUT(x) (1 << (((x) & 3) * 2)) /* FIFOx OUT */
+#define GIMR1_FIFO_SPK(x) (1 << (((x) & 3) * 2 + 1)) /* FIFOx SHORT PACKET */
+#define GIMR1_FIFO_RX(x) (GIMR1_FIFO_OUT(x) | GIMR1_FIFO_SPK(x))
+#define GIMR1_MASK 0xf00ff
+
+/* Group Interrupt Mask(Disable) Register 2 (Device) */
+#define GIMR2_WAKEUP (1 << 10) /* Device waked up */
+#define GIMR2_IDLE (1 << 9) /* Device idle */
+#define GIMR2_DMAERR (1 << 8) /* DMA error */
+#define GIMR2_DMAFIN (1 << 7) /* DMA finished */
+#define GIMR2_ZLPRX (1 << 6) /* Zero-Length-Packet Rx Interrupt */
+#define GIMR2_ZLPTX (1 << 5) /* Zero-Length-Packet Tx Interrupt */
+#define GIMR2_ISOCABT (1 << 4) /* ISOC Abort Interrupt */
+#define GIMR2_ISOCERR (1 << 3) /* ISOC Error Interrupt */
+#define GIMR2_RESUME (1 << 2) /* Resume state change Interrupt */
+#define GIMR2_SUSPEND (1 << 1) /* Suspend state change Interrupt */
+#define GIMR2_RESET (1 << 0) /* Reset Interrupt */
+#define GIMR2_MASK 0x7ff
+
+/* Group Interrupt Status Register */
+#define GISR_GRP2 (1 << 2) /* Interrupt group 2 */
+#define GISR_GRP1 (1 << 1) /* Interrupt group 1 */
+#define GISR_GRP0 (1 << 0) /* Interrupt group 0 */
+
+/* Group Interrupt Status Register 0 (CX) */
+#define GISR0_CXABORT (1 << 5) /* CX command abort interrupt */
+#define GISR0_CXERR (1 << 4) /* CX command error interrupt */
+#define GISR0_CXEND (1 << 3) /* CX command end interrupt */
+#define GISR0_CXOUT (1 << 2) /* EP0-OUT packet interrupt */
+#define GISR0_CXIN (1 << 1) /* EP0-IN packet interrupt */
+#define GISR0_CXSETUP (1 << 0) /* EP0-SETUP packet interrupt */
+
+/* Group Interrupt Status Register 1 (FIFO) */
+#define GISR1_IN_FIFO(x) (1 << (((x) & 0x03) + 16)) /* FIFOx IN */
+#define GISR1_OUT_FIFO(x) (1 << (((x) & 0x03) * 2)) /* FIFOx OUT */
+#define GISR1_SPK_FIFO(x) (1 << (((x) & 0x03) * 2 + 1)) /* FIFOx SPK */
+#define GISR1_RX_FIFO(x) (3 << (((x) & 0x03) * 2)) /* FIFOx OUT/SPK */
+
+/* Group Interrupt Status Register 2 (Device) */
+#define GISR2_WAKEUP (1 << 10) /* Device waked up */
+#define GISR2_IDLE (1 << 9) /* Device idle */
+#define GISR2_DMAERR (1 << 8) /* DMA error */
+#define GISR2_DMAFIN (1 << 7) /* DMA finished */
+#define GISR2_ZLPRX (1 << 6) /* Zero-Length-Packet Rx Interrupt */
+#define GISR2_ZLPTX (1 << 5) /* Zero-Length-Packet Tx Interrupt */
+#define GISR2_ISOCABT (1 << 4) /* ISOC Abort Interrupt */
+#define GISR2_ISOCERR (1 << 3) /* ISOC Error Interrupt */
+#define GISR2_RESUME (1 << 2) /* Resume state change Interrupt */
+#define GISR2_SUSPEND (1 << 1) /* Suspend state change Interrupt */
+#define GISR2_RESET (1 << 0) /* Reset Interrupt */
+
+/* Receive Zero-Length-Packet Register */
+#define RXZLP_EP(x) (1 << ((x) - 1)) /* EPx ZLP rx interrupt */
+
+/* Transfer Zero-Length-Packet Register */
+#define TXZLP_EP(x) (1 << ((x) - 1)) /* EPx ZLP tx interrupt */
+
+/* ISOC Error/Abort Status Register */
+#define ISOEASR_EP(x) (0x10001 << ((x) - 1)) /* EPx ISOC Error/Abort */
+
+/* IN Endpoint Register */
+#define IEP_SENDZLP (1 << 15) /* Send Zero-Length-Packet */
+#define IEP_TNRHB(x) (((x) & 0x03) << 13) \
+ /* Transaction Number for High-Bandwidth EP(ISOC) */
+#define IEP_RESET (1 << 12) /* Reset Toggle Sequence */
+#define IEP_STALL (1 << 11) /* Stall */
+#define IEP_MAXPS(x) ((x) & 0x7ff) /* Max. packet size */
+
+/* OUT Endpoint Register */
+#define OEP_RESET (1 << 12) /* Reset Toggle Sequence */
+#define OEP_STALL (1 << 11) /* Stall */
+#define OEP_MAXPS(x) ((x) & 0x7ff) /* Max. packet size */
+
+/* Endpoint Map Register (EP1 ~ EP4) */
+#define EPMAP14_SET_IN(ep, fifo) \
+ ((fifo) & 3) << (((ep) - 1) << 3 + 0)
+#define EPMAP14_SET_OUT(ep, fifo) \
+ ((fifo) & 3) << (((ep) - 1) << 3 + 4)
+#define EPMAP14_SET(ep, in, out) \
+ do { \
+ EPMAP14_SET_IN(ep, in); \
+ EPMAP14_SET_OUT(ep, out); \
+ } while (0)
+
+#define EPMAP14_DEFAULT 0x33221100 /* EP1->FIFO0, EP2->FIFO1... */
+
+/* Endpoint Map Register (EP5 ~ EP8) */
+#define EPMAP58_SET_IN(ep, fifo) \
+ ((fifo) & 3) << (((ep) - 5) << 3 + 0)
+#define EPMAP58_SET_OUT(ep, fifo) \
+ ((fifo) & 3) << (((ep) - 5) << 3 + 4)
+#define EPMAP58_SET(ep, in, out) \
+ do { \
+ EPMAP58_SET_IN(ep, in); \
+ EPMAP58_SET_OUT(ep, out); \
+ } while (0)
+
+#define EPMAP58_DEFAULT 0x00000000 /* All EPx->FIFO0 */
+
+/* FIFO Map Register */
+#define FIFOMAP_BIDIR (2 << 4)
+#define FIFOMAP_IN (1 << 4)
+#define FIFOMAP_OUT (0 << 4)
+#define FIFOMAP_DIR_MASK 0x30
+#define FIFOMAP_EP(x) ((x) & 0x0f)
+#define FIFOMAP_EP_MASK 0x0f
+#define FIFOMAP_CFG_MASK 0x3f
+#define FIFOMAP_DEFAULT 0x04030201 /* FIFO0->EP1, FIFO1->EP2... */
+#define FIFOMAP(fifo, cfg) (((cfg) & 0x3f) << (((fifo) & 3) << 3))
+
+/* FIFO Configuration Register */
+#define FIFOCFG_EN (1 << 5)
+#define FIFOCFG_BLKSZ_1024 (1 << 4)
+#define FIFOCFG_BLKSZ_512 (0 << 4)
+#define FIFOCFG_3BLK (2 << 2)
+#define FIFOCFG_2BLK (1 << 2)
+#define FIFOCFG_1BLK (0 << 2)
+#define FIFOCFG_NBLK_MASK 3
+#define FIFOCFG_NBLK_SHIFT 2
+#define FIFOCFG_INTR (3 << 0)
+#define FIFOCFG_BULK (2 << 0)
+#define FIFOCFG_ISOC (1 << 0)
+#define FIFOCFG_RSVD (0 << 0) /* Reserved */
+#define FIFOCFG_TYPE_MASK 3
+#define FIFOCFG_TYPE_SHIFT 0
+#define FIFOCFG_CFG_MASK 0x3f
+#define FIFOCFG(fifo, cfg) (((cfg) & 0x3f) << (((fifo) & 3) << 3))
+
+/* FIFO Control Status Register */
+#define FIFOCSR_RESET (1 << 12) /* FIFO Reset */
+#define FIFOCSR_BYTES(x) ((x) & 0x7ff) /* Length(bytes) for OUT-EP/FIFO */
+
+/* DMA Target FIFO Register */
+#define DMAFIFO_CX (1 << 4) /* DMA FIFO = CX FIFO */
+#define DMAFIFO_FIFO(x) (1 << ((x) & 0x3)) /* DMA FIFO = FIFOx */
+
+/* DMA Control Register */
+#define DMACTRL_LEN(x) (((x) & 0x1ffff) << 8) /* DMA length (Bytes) */
+#define DMACTRL_LEN_SHIFT 8
+#define DMACTRL_CLRFF (1 << 4) /* Clear FIFO upon DMA abort */
+#define DMACTRL_ABORT (1 << 3) /* DMA abort */
+#define DMACTRL_IO2IO (1 << 2) /* IO to IO */
+#define DMACTRL_FIFO2MEM (0 << 1) /* FIFO to Memory */
+#define DMACTRL_MEM2FIFO (1 << 1) /* Memory to FIFO */
+#define DMACTRL_START (1 << 0) /* DMA start */
+
+#endif
diff --git a/include/usb/fusbh200.h b/include/usb/fusbh200.h
new file mode 100644
index 0000000..8a9c488
--- /dev/null
+++ b/include/usb/fusbh200.h
@@ -0,0 +1,61 @@
+/*
+ * Faraday USB 2.0 EHCI Controller
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#ifndef _FUSBH200_H
+#define _FUSBH200_H
+
+struct fusbh200_regs {
+ struct {
+ uint32_t data[4];
+ } hccr; /* 0x00 - 0x0f: hccr */
+ struct {
+ uint32_t data[9];
+ } hcor; /* 0x10 - 0x33: hcor */
+ uint32_t easstr;/* 0x34: EOF&Async. Sched. Sleep Timer Register */
+ uint32_t rsvd[2];
+ uint32_t bmcsr; /* 0x40: Bus Monitor Control Status Register */
+ uint32_t bmisr; /* 0x44: Bus Monitor Interrupt Status Register */
+ uint32_t bmier; /* 0x48: Bus Monitor Interrupt Enable Register */
+};
+
+/* EOF & Async. Schedule Sleep Timer Register */
+#define EASSTR_RUNNING (1 << 6) /* Put transceiver in running/resume mode */
+#define EASSTR_SUSPEND (0 << 6) /* Put transceiver in suspend mode */
+#define EASSTR_EOF2(x) (((x) & 0x3) << 4) /* EOF 2 Timing */
+#define EASSTR_EOF1(x) (((x) & 0x3) << 2) /* EOF 1 Timing */
+#define EASSTR_ASST(x) (((x) & 0x3) << 0) /* Async. Sched. Sleep Timer */
+
+/* Bus Monitor Control Status Register */
+#define BMCSR_SPD_HIGH (2 << 9) /* Speed of the attached device */
+#define BMCSR_SPD_LOW (1 << 9)
+#define BMCSR_SPD_FULL (0 << 9)
+#define BMCSR_SPD_MASK (3 << 9)
+#define BMCSR_SPD_SHIFT 9
+#define BMCSR_SPD(x) ((x >> 9) & 0x03)
+#define BMCSR_VBUS (1 << 8) /* VBUS Valid */
+#define BMCSR_VBUS_OFF (1 << 4) /* VBUS Off */
+#define BMCSR_VBUS_ON (0 << 4) /* VBUS On */
+#define BMCSR_IRQLH (1 << 3) /* IRQ triggered at level-high */
+#define BMCSR_IRQLL (0 << 3) /* IRQ triggered at level-low */
+#define BMCSR_HALFSPD (1 << 2) /* Half speed mode for FPGA test */
+#define BMCSR_HFT_LONG (1 << 1) /* HDISCON noise filter = 270 us*/
+#define BMCSR_HFT (0 << 1) /* HDISCON noise filter = 135 us*/
+#define BMCSR_VFT_LONG (1 << 1) /* VBUS noise filter = 472 us*/
+#define BMCSR_VFT (0 << 1) /* VBUS noise filter = 135 us*/
+
+/* Bus Monitor Interrupt Status Register */
+/* Bus Monitor Interrupt Enable Register */
+#define BMISR_DMAERR (1 << 4) /* DMA error */
+#define BMISR_DMA (1 << 3) /* DMA complete */
+#define BMISR_DEVRM (1 << 2) /* device removed */
+#define BMISR_OVD (1 << 1) /* over-current detected */
+#define BMISR_VBUSERR (1 << 0) /* VBUS error */
+
+#endif
diff --git a/include/xilinx.h b/include/xilinx.h
index 5f25b7a..9a64771 100644
--- a/include/xilinx.h
+++ b/include/xilinx.h
@@ -27,28 +27,6 @@
#ifndef _XILINX_H_
#define _XILINX_H_
-/* Xilinx Model definitions
- *********************************************************************/
-#define CONFIG_SYS_SPARTAN2 CONFIG_SYS_FPGA_DEV( 0x1 )
-#define CONFIG_SYS_VIRTEX_E CONFIG_SYS_FPGA_DEV( 0x2 )
-#define CONFIG_SYS_VIRTEX2 CONFIG_SYS_FPGA_DEV( 0x4 )
-#define CONFIG_SYS_SPARTAN3 CONFIG_SYS_FPGA_DEV( 0x8 )
-#define CONFIG_SYS_XILINX_SPARTAN2 (CONFIG_SYS_FPGA_XILINX | CONFIG_SYS_SPARTAN2)
-#define CONFIG_SYS_XILINX_VIRTEX_E (CONFIG_SYS_FPGA_XILINX | CONFIG_SYS_VIRTEX_E)
-#define CONFIG_SYS_XILINX_VIRTEX2 (CONFIG_SYS_FPGA_XILINX | CONFIG_SYS_VIRTEX2)
-#define CONFIG_SYS_XILINX_SPARTAN3 (CONFIG_SYS_FPGA_XILINX | CONFIG_SYS_SPARTAN3)
-/* XXX - Add new models here */
-
-
-/* Xilinx Interface definitions
- *********************************************************************/
-#define CONFIG_SYS_XILINX_IF_SS CONFIG_SYS_FPGA_IF( 0x1 ) /* slave serial */
-#define CONFIG_SYS_XILINX_IF_MS CONFIG_SYS_FPGA_IF( 0x2 ) /* master serial */
-#define CONFIG_SYS_XILINX_IF_SP CONFIG_SYS_FPGA_IF( 0x4 ) /* slave parallel */
-#define CONFIG_SYS_XILINX_IF_JTAG CONFIG_SYS_FPGA_IF( 0x8 ) /* jtag */
-#define CONFIG_SYS_XILINX_IF_MSM CONFIG_SYS_FPGA_IF( 0x10 ) /* master selectmap */
-#define CONFIG_SYS_XILINX_IF_SSM CONFIG_SYS_FPGA_IF( 0x20 ) /* slave selectmap */
-
/* Xilinx types
*********************************************************************/
typedef enum { /* typedef Xilinx_iface */
@@ -59,6 +37,7 @@
jtag_mode, /* jtag/tap serial (not used ) */
master_selectmap, /* master SelectMap (virtex2) */
slave_selectmap, /* slave SelectMap (virtex2) */
+ devcfg, /* devcfg interface (zynq) */
max_xilinx_iface_type /* insert all new types before this */
} Xilinx_iface; /* end, typedef Xilinx_iface */
@@ -68,6 +47,7 @@
Xilinx_VirtexE, /* Virtex-E Family */
Xilinx_Virtex2, /* Virtex2 Family */
Xilinx_Spartan3, /* Spartan-III Family */
+ xilinx_zynq, /* Zynq Family */
max_xilinx_type /* insert all new types before this */
} Xilinx_Family; /* end, typedef Xilinx_Family */
@@ -77,6 +57,7 @@
size_t size; /* bytes of data part can accept */
void *iface_fns; /* interface function table */
int cookie; /* implementation specific cookie */
+ char *name; /* device name in bitstream */
} Xilinx_desc; /* end, typedef Xilinx_desc */
/* Generic Xilinx Functions
diff --git a/include/zynqpl.h b/include/zynqpl.h
new file mode 100644
index 0000000..0247ef6
--- /dev/null
+++ b/include/zynqpl.h
@@ -0,0 +1,59 @@
+/*
+ * (C) Copyright 2012-2013, Xilinx, Michal Simek
+ *
+ * (C) Copyright 2012
+ * Joe Hershberger <joe.hershberger@ni.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ZYNQPL_H_
+#define _ZYNQPL_H_
+
+#include <xilinx.h>
+
+extern int zynq_load(Xilinx_desc *desc, const void *image, size_t size);
+extern int zynq_dump(Xilinx_desc *desc, const void *buf, size_t bsize);
+extern int zynq_info(Xilinx_desc *desc);
+
+#define XILINX_ZYNQ_7010 0x2
+#define XILINX_ZYNQ_7020 0x7
+#define XILINX_ZYNQ_7030 0xc
+#define XILINX_ZYNQ_7045 0x11
+
+/* Device Image Sizes */
+#define XILINX_XC7Z010_SIZE 16669920/8
+#define XILINX_XC7Z020_SIZE 32364512/8
+#define XILINX_XC7Z030_SIZE 47839328/8
+#define XILINX_XC7Z045_SIZE 106571232/8
+
+/* Descriptor Macros */
+#define XILINX_XC7Z010_DESC(cookie) \
+{ xilinx_zynq, devcfg, XILINX_XC7Z010_SIZE, NULL, cookie, "7z010" }
+
+#define XILINX_XC7Z020_DESC(cookie) \
+{ xilinx_zynq, devcfg, XILINX_XC7Z020_SIZE, NULL, cookie, "7z020" }
+
+#define XILINX_XC7Z030_DESC(cookie) \
+{ xilinx_zynq, devcfg, XILINX_XC7Z030_SIZE, NULL, cookie, "7z030" }
+
+#define XILINX_XC7Z045_DESC(cookie) \
+{ xilinx_zynq, devcfg, XILINX_XC7Z045_SIZE, NULL, cookie, "7z045" }
+
+#endif /* _ZYNQPL_H_ */
diff --git a/lib/Makefile b/lib/Makefile
index 8f81862..5d58609 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -55,6 +55,7 @@
COBJS-y += strmhz.o
COBJS-$(CONFIG_TPM) += tpm.o
COBJS-$(CONFIG_RBTREE) += rbtree.o
+COBJS-$(CONFIG_BITREVERSE) += bitrev.o
endif
ifdef CONFIG_SPL_BUILD
diff --git a/lib/bitrev.c b/lib/bitrev.c
new file mode 100644
index 0000000..160021a
--- /dev/null
+++ b/lib/bitrev.c
@@ -0,0 +1,59 @@
+/*
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ *
+ * Based on bitrev from the Linux kernel, by Akinobu Mita
+ */
+
+
+#include <linux/types.h>
+#include <linux/bitrev.h>
+
+const u8 byte_rev_table[256] = {
+ 0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0,
+ 0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0,
+ 0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8,
+ 0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8,
+ 0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4,
+ 0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4,
+ 0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec,
+ 0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc,
+ 0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2,
+ 0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2,
+ 0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea,
+ 0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa,
+ 0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6,
+ 0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6,
+ 0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee,
+ 0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe,
+ 0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1,
+ 0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1,
+ 0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9,
+ 0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9,
+ 0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5,
+ 0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5,
+ 0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed,
+ 0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd,
+ 0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3,
+ 0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3,
+ 0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb,
+ 0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb,
+ 0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7,
+ 0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7,
+ 0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef,
+ 0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff,
+};
+
+u16 bitrev16(u16 x)
+{
+ return (bitrev8(x & 0xff) << 8) | bitrev8(x >> 8);
+}
+
+/**
+ * bitrev32 - reverse the order of bits in a u32 value
+ * @x: value to be bit-reversed
+ */
+u32 bitrev32(u32 x)
+{
+ return (bitrev16(x & 0xffff) << 16) | bitrev16(x >> 16);
+}
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index ac1fe0b..005ad3d 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -66,6 +66,7 @@
COMPAT(GENERIC_SPI_FLASH, "spi-flash"),
COMPAT(MAXIM_98095_CODEC, "maxim,max98095-codec"),
COMPAT(INFINEON_SLB9635_TPM, "infineon,slb9635-tpm"),
+ COMPAT(INFINEON_SLB9645_TPM, "infineon,slb9645-tpm"),
};
const char *fdtdec_get_compatible(enum fdt_compat_id id)
diff --git a/lib/string.c b/lib/string.c
index 09dfae0..3a82efa 100644
--- a/lib/string.c
+++ b/lib/string.c
@@ -617,3 +617,62 @@
}
#endif
+#ifndef __HAVE_ARCH_MEMCHR_INV
+static void *check_bytes8(const u8 *start, u8 value, unsigned int bytes)
+{
+ while (bytes) {
+ if (*start != value)
+ return (void *)start;
+ start++;
+ bytes--;
+ }
+ return NULL;
+}
+/**
+ * memchr_inv - Find an unmatching character in an area of memory.
+ * @start: The memory area
+ * @c: Find a character other than c
+ * @bytes: The size of the area.
+ *
+ * returns the address of the first character other than @c, or %NULL
+ * if the whole buffer contains just @c.
+ */
+void *memchr_inv(const void *start, int c, size_t bytes)
+{
+ u8 value = c;
+ u64 value64;
+ unsigned int words, prefix;
+
+ if (bytes <= 16)
+ return check_bytes8(start, value, bytes);
+
+ value64 = value;
+ value64 |= value64 << 8;
+ value64 |= value64 << 16;
+ value64 |= value64 << 32;
+
+ prefix = (unsigned long)start % 8;
+ if (prefix) {
+ u8 *r;
+
+ prefix = 8 - prefix;
+ r = check_bytes8(start, value, prefix);
+ if (r)
+ return r;
+ start += prefix;
+ bytes -= prefix;
+ }
+
+ words = bytes / 8;
+
+ while (words) {
+ if (*(u64 *)start != value64)
+ return check_bytes8(start, value, 8);
+ start += 8;
+ words--;
+ }
+
+ return check_bytes8(start, value, bytes % 8);
+}
+#endif
+
diff --git a/spl/Makefile b/spl/Makefile
index b5a8de7..d8fe948 100644
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -88,6 +88,10 @@
LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
endif
+ifneq (,$(CONFIG_MX23)$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35))
+LIBS-y += arch/$(ARCH)/imx-common/libimx-common.o
+endif
+
ifneq ($(CONFIG_TEGRA),)
LIBS-y += arch/$(ARCH)/cpu/$(SOC)-common/lib$(SOC)-common.o
LIBS-y += arch/$(ARCH)/cpu/tegra-common/libcputegra-common.o
diff --git a/test/image/test-fit.py b/test/image/test-fit.py
new file mode 100755
index 0000000..c4e8211
--- /dev/null
+++ b/test/image/test-fit.py
@@ -0,0 +1,422 @@
+#!/usr/bin/python
+#
+# Copyright (c) 2013, Google Inc.
+#
+# Sanity check of the FIT handling in U-Boot
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# To run this:
+#
+# make O=sandbox sandbox_config
+# make O=sandbox
+# ./test/image/test-fit.py -u sandbox/u-boot
+
+import doctest
+from optparse import OptionParser
+import os
+import shutil
+import struct
+import sys
+import tempfile
+
+# The 'command' library in patman is convenient for running commands
+base_path = os.path.dirname(sys.argv[0])
+patman = os.path.join(base_path, '../../tools/patman')
+sys.path.append(patman)
+
+import command
+
+# Define a base ITS which we can adjust using % and a dictionary
+base_its = '''
+/dts-v1/;
+
+/ {
+ description = "Chrome OS kernel image with one or more FDT blobs";
+ #address-cells = <1>;
+
+ images {
+ kernel@1 {
+ data = /incbin/("%(kernel)s");
+ type = "kernel";
+ arch = "sandbox";
+ os = "linux";
+ compression = "none";
+ load = <0x40000>;
+ entry = <0x8>;
+ };
+ fdt@1 {
+ description = "snow";
+ data = /incbin/("u-boot.dtb");
+ type = "flat_dt";
+ arch = "sandbox";
+ %(fdt_load)s
+ compression = "none";
+ signature@1 {
+ algo = "sha1,rsa2048";
+ key-name-hint = "dev";
+ };
+ };
+ ramdisk@1 {
+ description = "snow";
+ data = /incbin/("%(ramdisk)s");
+ type = "ramdisk";
+ arch = "sandbox";
+ os = "linux";
+ %(ramdisk_load)s
+ compression = "none";
+ };
+ };
+ configurations {
+ default = "conf@1";
+ conf@1 {
+ kernel = "kernel@1";
+ fdt = "fdt@1";
+ %(ramdisk_config)s
+ };
+ };
+};
+'''
+
+# Define a base FDT - currently we don't use anything in this
+base_fdt = '''
+/dts-v1/;
+
+/ {
+ model = "Sandbox Verified Boot Test";
+ compatible = "sandbox";
+
+};
+'''
+
+# This is the U-Boot script that is run for each test. First load the fit,
+# then do the 'bootm' command, then save out memory from the places where
+# we expect 'bootm' to write things. Then quit.
+base_script = '''
+sb load host 0 %(fit_addr)x %(fit)s
+fdt addr %(fit_addr)x
+bootm start %(fit_addr)x
+bootm loados
+sb save host 0 %(kernel_out)s %(kernel_addr)x %(kernel_size)x
+sb save host 0 %(fdt_out)s %(fdt_addr)x %(fdt_size)x
+sb save host 0 %(ramdisk_out)s %(ramdisk_addr)x %(ramdisk_size)x
+reset
+'''
+
+def make_fname(leaf):
+ """Make a temporary filename
+
+ Args:
+ leaf: Leaf name of file to create (within temporary directory)
+ Return:
+ Temporary filename
+ """
+ global base_dir
+
+ return os.path.join(base_dir, leaf)
+
+def filesize(fname):
+ """Get the size of a file
+
+ Args:
+ fname: Filename to check
+ Return:
+ Size of file in bytes
+ """
+ return os.stat(fname).st_size
+
+def read_file(fname):
+ """Read the contents of a file
+
+ Args:
+ fname: Filename to read
+ Returns:
+ Contents of file as a string
+ """
+ with open(fname, 'r') as fd:
+ return fd.read()
+
+def make_dtb():
+ """Make a sample .dts file and compile it to a .dtb
+
+ Returns:
+ Filename of .dtb file created
+ """
+ src = make_fname('u-boot.dts')
+ dtb = make_fname('u-boot.dtb')
+ with open(src, 'w') as fd:
+ print >>fd, base_fdt
+ command.Output('dtc', src, '-O', 'dtb', '-o', dtb)
+ return dtb
+
+def make_its(params):
+ """Make a sample .its file with parameters embedded
+
+ Args:
+ params: Dictionary containing parameters to embed in the %() strings
+ Returns:
+ Filename of .its file created
+ """
+ its = make_fname('test.its')
+ with open(its, 'w') as fd:
+ print >>fd, base_its % params
+ return its
+
+def make_fit(mkimage, params):
+ """Make a sample .fit file ready for loading
+
+ This creates a .its script with the selected parameters and uses mkimage to
+ turn this into a .fit image.
+
+ Args:
+ mkimage: Filename of 'mkimage' utility
+ params: Dictionary containing parameters to embed in the %() strings
+ Return:
+ Filename of .fit file created
+ """
+ fit = make_fname('test.fit')
+ its = make_its(params)
+ command.Output(mkimage, '-f', its, fit)
+ with open(make_fname('u-boot.dts'), 'w') as fd:
+ print >>fd, base_fdt
+ return fit
+
+def make_kernel():
+ """Make a sample kernel with test data
+
+ Returns:
+ Filename of kernel created
+ """
+ fname = make_fname('test-kernel.bin')
+ data = ''
+ for i in range(100):
+ data += 'this kernel %d is unlikely to boot\n' % i
+ with open(fname, 'w') as fd:
+ print >>fd, data
+ return fname
+
+def make_ramdisk():
+ """Make a sample ramdisk with test data
+
+ Returns:
+ Filename of ramdisk created
+ """
+ fname = make_fname('test-ramdisk.bin')
+ data = ''
+ for i in range(100):
+ data += 'ramdisk %d was seldom used in the middle ages\n' % i
+ with open(fname, 'w') as fd:
+ print >>fd, data
+ return fname
+
+def find_matching(text, match):
+ """Find a match in a line of text, and return the unmatched line portion
+
+ This is used to extract a part of a line from some text. The match string
+ is used to locate the line - we use the first line that contains that
+ match text.
+
+ Once we find a match, we discard the match string itself from the line,
+ and return what remains.
+
+ TODO: If this function becomes more generally useful, we could change it
+ to use regex and return groups.
+
+ Args:
+ text: Text to check (each line separated by \n)
+ match: String to search for
+ Return:
+ String containing unmatched portion of line
+ Exceptions:
+ ValueError: If match is not found
+
+ >>> find_matching('first line:10\\nsecond_line:20', 'first line:')
+ '10'
+ >>> find_matching('first line:10\\nsecond_line:20', 'second linex')
+ Traceback (most recent call last):
+ ...
+ ValueError: Test aborted
+ >>> find_matching('first line:10\\nsecond_line:20', 'second_line:')
+ '20'
+ """
+ for line in text.splitlines():
+ pos = line.find(match)
+ if pos != -1:
+ return line[:pos] + line[pos + len(match):]
+
+ print "Expected '%s' but not found in output:"
+ print text
+ raise ValueError('Test aborted')
+
+def set_test(name):
+ """Set the name of the current test and print a message
+
+ Args:
+ name: Name of test
+ """
+ global test_name
+
+ test_name = name
+ print name
+
+def fail(msg):
+ """Raise an error with a helpful failure message
+
+ Args:
+ msg: Message to display
+ """
+ raise ValueError("Test '%s' failed: %s" % (test_name, msg))
+
+def run_fit_test(mkimage, u_boot):
+ """Basic sanity check of FIT loading in U-Boot
+
+ TODO: Almost everything:
+ - hash algorithms - invalid hash/contents should be detected
+ - signature algorithms - invalid sig/contents should be detected
+ - compression
+ - checking that errors are detected like:
+ - image overwriting
+ - missing images
+ - invalid configurations
+ - incorrect os/arch/type fields
+ - empty data
+ - images too large/small
+ - invalid FDT (e.g. putting a random binary in instead)
+ - default configuration selection
+ - bootm command line parameters should have desired effect
+ - run code coverage to make sure we are testing all the code
+ """
+ global test_name
+
+ # Set up invariant files
+ control_dtb = make_dtb()
+ kernel = make_kernel()
+ ramdisk = make_ramdisk()
+ kernel_out = make_fname('kernel-out.bin')
+ fdt_out = make_fname('fdt-out.dtb')
+ ramdisk_out = make_fname('ramdisk-out.bin')
+
+ # Set up basic parameters with default values
+ params = {
+ 'fit_addr' : 0x1000,
+
+ 'kernel' : kernel,
+ 'kernel_out' : kernel_out,
+ 'kernel_addr' : 0x40000,
+ 'kernel_size' : filesize(kernel),
+
+ 'fdt_out' : fdt_out,
+ 'fdt_addr' : 0x80000,
+ 'fdt_size' : filesize(control_dtb),
+ 'fdt_load' : '',
+
+ 'ramdisk' : ramdisk,
+ 'ramdisk_out' : ramdisk_out,
+ 'ramdisk_addr' : 0xc0000,
+ 'ramdisk_size' : filesize(ramdisk),
+ 'ramdisk_load' : '',
+ 'ramdisk_config' : '',
+ }
+
+ # Make a basic FIT and a script to load it
+ fit = make_fit(mkimage, params)
+ params['fit'] = fit
+ cmd = base_script % params
+
+ # First check that we can load a kernel
+ # We could perhaps reduce duplication with some loss of readability
+ set_test('Kernel load')
+ stdout = command.Output(u_boot, '-d', control_dtb, '-c', cmd)
+ if read_file(kernel) != read_file(kernel_out):
+ fail('Kernel not loaded')
+ if read_file(control_dtb) == read_file(fdt_out):
+ fail('FDT loaded but should be ignored')
+ if read_file(ramdisk) == read_file(ramdisk_out):
+ fail('Ramdisk loaded but should not be')
+
+ # Find out the offset in the FIT where U-Boot has found the FDT
+ line = find_matching(stdout, 'Booting using the fdt blob at ')
+ fit_offset = int(line, 16) - params['fit_addr']
+ fdt_magic = struct.pack('>L', 0xd00dfeed)
+ data = read_file(fit)
+
+ # Now find where it actually is in the FIT (skip the first word)
+ real_fit_offset = data.find(fdt_magic, 4)
+ if fit_offset != real_fit_offset:
+ fail('U-Boot loaded FDT from offset %#x, FDT is actually at %#x' %
+ (fit_offset, real_fit_offset))
+
+ # Now a kernel and an FDT
+ set_test('Kernel + FDT load')
+ params['fdt_load'] = 'load = <%#x>;' % params['fdt_addr']
+ fit = make_fit(mkimage, params)
+ stdout = command.Output(u_boot, '-d', control_dtb, '-c', cmd)
+ if read_file(kernel) != read_file(kernel_out):
+ fail('Kernel not loaded')
+ if read_file(control_dtb) != read_file(fdt_out):
+ fail('FDT not loaded')
+ if read_file(ramdisk) == read_file(ramdisk_out):
+ fail('Ramdisk loaded but should not be')
+
+ # Try a ramdisk
+ set_test('Kernel + FDT + Ramdisk load')
+ params['ramdisk_config'] = 'ramdisk = "ramdisk@1";'
+ params['ramdisk_load'] = 'load = <%#x>;' % params['ramdisk_addr']
+ fit = make_fit(mkimage, params)
+ stdout = command.Output(u_boot, '-d', control_dtb, '-c', cmd)
+ if read_file(ramdisk) != read_file(ramdisk_out):
+ fail('Ramdisk not loaded')
+
+def run_tests():
+ """Parse options, run the FIT tests and print the result"""
+ global base_path, base_dir
+
+ # Work in a temporary directory
+ base_dir = tempfile.mkdtemp()
+ parser = OptionParser()
+ parser.add_option('-u', '--u-boot',
+ default=os.path.join(base_path, 'u-boot'),
+ help='Select U-Boot sandbox binary')
+ parser.add_option('-k', '--keep', action='store_true',
+ help="Don't delete temporary directory even when tests pass")
+ parser.add_option('-t', '--selftest', action='store_true',
+ help='Run internal self tests')
+ (options, args) = parser.parse_args()
+
+ # Find the path to U-Boot, and assume mkimage is in its tools/mkimage dir
+ base_path = os.path.dirname(options.u_boot)
+ mkimage = os.path.join(base_path, 'tools/mkimage')
+
+ # There are a few doctests - handle these here
+ if options.selftest:
+ doctest.testmod()
+ return
+
+ title = 'FIT Tests'
+ print title, '\n', '=' * len(title)
+
+ run_fit_test(mkimage, options.u_boot)
+
+ print '\nTests passed'
+ print 'Caveat: this is only a sanity check - test coverage is poor'
+
+ # Remove the tempoerary directory unless we are asked to keep it
+ if options.keep:
+ print "Output files are in '%s'" % base_dir
+ else:
+ shutil.rmtree(base_dir)
+
+run_tests()
diff --git a/tools/Makefile b/tools/Makefile
index 26eb500..4630f03 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -130,27 +130,20 @@
LOGO-$(CONFIG_VIDEO_LOGO) += $(LOGO_H)
LOGO-$(CONFIG_VIDEO_LOGO) += $(LOGO_DATA_H)
+# Generic logo
ifeq ($(LOGO_BMP),)
LOGO_BMP= logos/denx.bmp
+
+# Use board logo and fallback to vendor
+ifneq ($(wildcard logos/$(BOARD).bmp),)
+LOGO_BMP= logos/$(BOARD).bmp
+else
+ifneq ($(wildcard logos/$(VENDOR).bmp),)
+LOGO_BMP= logos/$(VENDOR).bmp
endif
-ifeq ($(VENDOR),atmel)
-LOGO_BMP= logos/atmel.bmp
endif
-ifeq ($(VENDOR),esd)
-LOGO_BMP= logos/esd.bmp
-endif
-ifeq ($(VENDOR),freescale)
-LOGO_BMP= logos/freescale.bmp
-endif
-ifeq ($(VENDOR),ronetix)
-LOGO_BMP= logos/ronetix.bmp
-endif
-ifeq ($(VENDOR),syteco)
-LOGO_BMP= logos/syteco.bmp
-endif
-ifeq ($(VENDOR),intercontrol)
-LOGO_BMP= logos/intercontrol.bmp
-endif
+
+endif # !LOGO_BMP
# now $(obj) is defined
HOSTSRCS += $(addprefix $(SRCTREE)/,$(EXT_OBJ_FILES-y:.o=.c))
diff --git a/tools/checkpatch.pl b/tools/checkpatch.pl
index 9f23901..896e2bc 100755
--- a/tools/checkpatch.pl
+++ b/tools/checkpatch.pl
@@ -273,6 +273,7 @@
WARN(?:_RATELIMIT|_ONCE|)|
panic|
debug|
+ printf|
MODULE_[A-Z_]+
)};
diff --git a/tools/imximage.c b/tools/imximage.c
index fa308c9..5e8e470 100644
--- a/tools/imximage.c
+++ b/tools/imximage.c
@@ -37,6 +37,7 @@
*/
static table_entry_t imximage_cmds[] = {
{CMD_BOOT_FROM, "BOOT_FROM", "boot command", },
+ {CMD_BOOT_OFFSET, "BOOT_OFFSET", "Boot offset", },
{CMD_DATA, "DATA", "Reg Write Data", },
{CMD_IMAGE_VERSION, "IMAGE_VERSION", "image version", },
{-1, "", "", },
@@ -352,6 +353,11 @@
if (unlikely(cmd_ver_first != 1))
cmd_ver_first = 0;
break;
+ case CMD_BOOT_OFFSET:
+ imxhdr->flash_offset = get_cfg_value(token, name, lineno);
+ if (unlikely(cmd_ver_first != 1))
+ cmd_ver_first = 0;
+ break;
case CMD_DATA:
value = get_cfg_value(token, name, lineno);
(*set_dcd_val)(imxhdr, name, lineno, fld, value, dcd_len);
@@ -518,11 +524,14 @@
/*
* ROM bug alert
- * mx53 only loads 512 byte multiples.
- * The remaining fraction of a block bytes would
- * not be loaded.
+ *
+ * MX53 only loads 512 byte multiples in case of SD boot.
+ * MX53 only loads NAND page multiples in case of NAND boot and
+ * supports up to 4096 byte large pages, thus align to 4096.
+ *
+ * The remaining fraction of a block bytes would not be loaded!
*/
- *header_size_ptr = ROUND(sbuf->st_size + imxhdr->flash_offset, 512);
+ *header_size_ptr = ROUND(sbuf->st_size + imxhdr->flash_offset, 4096);
}
int imximage_check_params(struct mkimage_params *params)
diff --git a/tools/imximage.h b/tools/imximage.h
index 42b6090..5c929e4 100644
--- a/tools/imximage.h
+++ b/tools/imximage.h
@@ -31,6 +31,11 @@
#define HEADER_OFFSET 0x400
+/*
+ * NOTE: This file must be kept in sync with arch/arm/include/asm/\
+ * imx-common/imximage.cfg because tools/imximage.c can not
+ * cross-include headers from arch/arm/ and vice-versa.
+ */
#define CMD_DATA_STR "DATA"
#define FLASH_OFFSET_UNDEFINED 0xFFFFFFFF
#define FLASH_OFFSET_STANDARD 0x400
@@ -52,6 +57,7 @@
CMD_INVALID,
CMD_IMAGE_VERSION,
CMD_BOOT_FROM,
+ CMD_BOOT_OFFSET,
CMD_DATA
};
@@ -151,13 +157,14 @@
dcd_v2_t dcd_table;
} imx_header_v2_t;
+/* The header must be aligned to 4k on MX53 for NAND boot */
struct imx_header {
union {
imx_header_v1_t hdr_v1;
imx_header_v2_t hdr_v2;
} header;
uint32_t flash_offset;
-};
+} __attribute__((aligned(4096)));
typedef void (*set_dcd_val_t)(struct imx_header *imxhdr,
char *name, int lineno,
diff --git a/tools/logos/wandboard.bmp b/tools/logos/wandboard.bmp
new file mode 100644
index 0000000..7f288a8
--- /dev/null
+++ b/tools/logos/wandboard.bmp
Binary files differ
diff --git a/tools/mkimage.h b/tools/mkimage.h
index e07a615..03c6c8f 100644
--- a/tools/mkimage.h
+++ b/tools/mkimage.h
@@ -44,12 +44,24 @@
#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+static inline void *map_sysmem(ulong paddr, unsigned long len)
+{
+ return (void *)(uintptr_t)paddr;
+}
+
+static inline ulong map_to_sysmem(void *ptr)
+{
+ return (ulong)(uintptr_t)ptr;
+}
+
#define MKIMAGE_TMPFILE_SUFFIX ".tmp"
#define MKIMAGE_MAX_TMPFILE_LEN 256
#define MKIMAGE_DEFAULT_DTC_OPTIONS "-I dts -O dtb -p 500"
#define MKIMAGE_MAX_DTC_CMDLINE_LEN 512
#define MKIMAGE_DTC "dtc" /* assume dtc is in $PATH */
+#define IH_ARCH_DEFAULT IH_ARCH_INVALID
+
/*
* This structure defines all such variables those are initialized by
* mkimage main core and need to be referred by image type specific
diff --git a/tools/mxsboot.c b/tools/mxsboot.c
index 6c05aa4..d92c39f 100644
--- a/tools/mxsboot.c
+++ b/tools/mxsboot.c
@@ -551,7 +551,7 @@
fsize = lseek(infd, 0, SEEK_END);
lseek(infd, 0, SEEK_SET);
- size = fsize + 512;
+ size = fsize + 4 * 512;
buf = malloc(size);
if (!buf) {
@@ -559,7 +559,7 @@
goto err0;
}
- ret = read(infd, (uint8_t *)buf + 512, fsize);
+ ret = read(infd, (uint8_t *)buf + 4 * 512, fsize);
if (ret != fsize) {
ret = -1;
goto err1;
@@ -574,8 +574,8 @@
cb->drv_info[0].chip_num = 0x0;
cb->drv_info[0].drive_type = 0x0;
cb->drv_info[0].tag = 0x1;
- cb->drv_info[0].first_sector_number = sd_sector + 1;
- cb->drv_info[0].sector_count = (size - 1) / 512;
+ cb->drv_info[0].first_sector_number = sd_sector + 4;
+ cb->drv_info[0].sector_count = (size - 4) / 512;
wr_size = write(outfd, buf, size);
if (wr_size != size) {
