Fix merge problems
Signed-off-by: Stefan Roese <sr@denx.de>
diff --git a/.gitignore b/.gitignore
index 89e96f5..96c1b4a 100644
--- a/.gitignore
+++ b/.gitignore
@@ -26,6 +26,8 @@
/u-boot.ldr
/u-boot.ldr.hex
/u-boot.ldr.srec
+/u-boot-onenand.bin
+/u-boot-flexonenand.bin
#
# Generated files
@@ -46,3 +48,8 @@
# cscope files
cscope.*
+
+# OneNAND IPL files
+/onenand_ipl/onenand-ipl*
+/onenand_ipl/board/*/onenand*
+/onenand_ipl/board/*/*.S
diff --git a/CHANGELOG b/CHANGELOG
index 0e317cb..7ff1a8a 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,3 +1,553 @@
+commit a48311557db6e7e9473a6163b44bb1e6c6ed64c4
+Author: Mark Jackson <mpfj@mimc.co.uk>
+Date: Thu Jul 31 16:09:00 2008 +0100
+
+ Add gzipped logo support
+
+ The README file states that CONFIG_VIDEO_BMP_GZIP behaves as follows:
+
+ If this option is set, additionally to standard BMP
+ images, gzipped BMP images can be displayed via the
+ splashscreen support or the bmp command.
+
+ However, the splashscreen function *only* supports standard BMP images.
+
+ This patch adds the documented gzip support.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+
+commit a5bcb01fbde6b1f1c9863cd86e5c4c369f0121ac
+Author: Mark Jackson <mpfj@mimc.co.uk>
+Date: Thu Jul 31 15:56:48 2008 +0100
+
+ Fix Atmel LCD controller endianess for AVR32 processors
+
+ The Atmel lcd controller is used on Atmel's AT91 (little endian) and
+ AVR32 (big endian) platforms.
+
+ As such, the controller can handle both big and little endian memory.
+
+ This patch fixes the driver for the AVR32 platform.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+
+commit cdb8bd2fd3bcbe65d8e4334a55f5a667845426a1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Jul 31 15:56:01 2008 +0200
+
+ apollon: fix build out of tree
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2e752be39d3e398d4ab89ffa6634c397df298297
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Thu Jul 31 12:35:04 2008 +0200
+
+ Uncompressed images loaded to their start address shall set load_end too
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit c37207d7f51e19c17f859966f314e27cc1231801
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jul 16 16:38:59 2008 +0200
+
+ Fix printf() format problems with configurable prompts
+
+ U-Boot allows for configurable prompt strings using the
+ CONFIG_AUTOBOOT_PROMPT resp. CONFIG_MENUPROMPT definitions. So far,
+ the assumption was that any such user defined problts would contain
+ exactly one "%d" format specifier. But some boards did not.
+
+ To allow for flexible boot prompts without adding too complex code we
+ now allow to specify the whole list of printf() arguments in the user
+ definition. This is powerful, but requires a responsible user who
+ really understands what he is doing, as he needs to know for exanple
+ which variables are available in the respective context.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 54754120637b6a7f4ff774fb199fc550bcfea1da
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 31 17:02:14 2008 +0200
+
+ TQM85xx: fix typo introduce by commit ffbb5cb9
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0b4951d4cddca9cc800745891c95b291e47cbbd7
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 31 15:27:01 2008 +0200
+
+ mvbc_p board: fix most build warnings.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c4ec6db074051d2f6fc76a66411c60621b22bc02
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 31 13:57:20 2008 +0200
+
+ E1000: clean up CONFIG_E1000_FALLBACK_MAC handling
+
+ Avoid "integer constant is too large for 'long' type" warnings.
+ And simplify the code.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9196b44334c330cc13de2464c59181e4db71f549
+Author: Matvejchikov Ilya <matvejchikov@gmail.com>
+Date: Wed Jul 30 23:21:19 2008 +0400
+
+ 8260: Making the use of gd->pci_clk dependant on the CONFIG_PCI
+
+ Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
+
+commit 6361ad4b596f5a940a01c91ae0297d98f790cbe0
+Author: Matvejchikov Ilya <matvejchikov@gmail.com>
+Date: Wed Jul 30 23:20:32 2008 +0400
+
+ PPC: Add pci_clk in the global_data for CPM2 processors
+
+ This patch adds pci_clk field to the global_data structure for the
+ processors which have CPM2 module in case the CONFIG_PCI is defined.
+
+ Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
+
+commit f0ff885ca64655bee6540eb8a25eed90b1152686
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jul 30 14:13:30 2008 -0500
+
+ mpc85xx: Update linker scripts for Freescale boards
+
+ * Move to using absolute addressing always. Makes the scripts a bit more
+ portable and common
+ * Moved .bss after the end of the image. These allows us to have more
+ room in the resulting binary image for code and data.
+ * Removed .text object files that aren't really needed
+ * Make sure _end is 4-byte aligned as the .bss init code expects this.
+ (Its possible that the end of .bss isn't 4-byte aligned)
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 57c219ad5d34dd9d49991777a62e3899595f2ec7
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jul 30 08:01:15 2008 -0500
+
+ Fix compile warnings in dlmalloc
+
+ The origional code was using on odd reference to get to the first
+ real element in av_[]. The first two elements of the array are
+ not used for actual bins, but for house keeping. If we are more
+ explicit about how use the first few elements we can get rid of the
+ warnings:
+
+ dlmalloc.c: In function 'malloc_extend_top':
+ dlmalloc.c:1971: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ dlmalloc.c:1999: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ dlmalloc.c:2029: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ ...
+
+ The logic of how this code came to be is:
+ bin_at(0) = (char*)&(av_[2]) - 2*SIZE_SZ
+
+ SIZE_SZ is the size of pointer, and av_ is arry of pointers so:
+ bin_at(0) = &(av_[0])
+
+ Going from there to bin_at(0)->fd or bin_at(0)->size should be straight forward.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3f9ae1a5d43c49a8ecf497470c3d1d80255e44b9
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jul 30 10:21:01 2008 +0200
+
+ ppc4xx: Fix W7OLMG compile problems by adding missing LM75 defines
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ebb86c4ecd37a7701358284e497ca4c6483c7cc5
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jul 30 09:59:51 2008 +0200
+
+ cmd_bootm.c: Fix problem with '#if (CONFIG_CMD_USB)'
+
+ A recent patch used '#if (CONFIG_CMD_USB)' instead of
+ '#if defined(CONFIG_CMD_USB)'. This patch fixes this problem and makes
+ common/bootm.c compile again.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Acked-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 2cb9080427fe641dcb71da46cd0634dd406f37ed
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Tue Jul 22 08:01:43 2008 +0900
+
+ Remove unused I2C at apollon board
+
+ There are no I2C devices on this board.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 3c95960e526b3b026da20201db64526f46faf14b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 31 10:12:09 2008 +0200
+
+ at91rm9200dk, csb637: fix NAND related build problems
+
+ Tried fixing NAND support for the at91rm9200dk board; untested.
+ Disabled NAND support in the csb637 board config file.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 09d318a8bb1444ec92e31cafcdba877eb9409e58
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Jul 29 12:23:49 2008 -0500
+
+ fsl_i2c: Use timebase timer functions instead of get_timer()
+
+ The current implementation of get_timer() is only really useful after we
+ have relocated u-boot to memory. The i2c code is used before that as part
+ of the SPD DDR setup.
+
+ We actually have a bug when using the get_timer() code before relocation
+ because the .bss hasn't been setup and thus we could be reading/writing
+ a random location (probably in flash).
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 4fc72a0d6ca85070a5e90d76cc5a853526ac09c4
+Author: Frank Svendsbøe <frank.svendsboe@gmail.com>
+Date: Tue Jul 29 14:49:31 2008 +0200
+
+ Adder8xx: Fix CFG_MONITOR_LEN
+
+ Due to increased space usage, U-Boot can no longer be stored in three sectors.
+ The current U-Boot use just over three flash sectors (197k), and U-Boot will
+ become corrupt after saving environment variables. This patch adds another 64k
+ to CFG_MONITOR_LEN.
+
+ Signed-off-by: Frank E. Svendsbøe <frank.svendsboe@gmail.com>
+
+commit a4c59ad4a21140550ada6f97690d2527c4146ce5
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Tue Jul 29 08:47:57 2008 +0900
+
+ Add OneNAND IPL related files to gitignore
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 8d87589e8e874df7120a3d9667f051bc33bac250
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Mon Jul 28 20:38:25 2008 +0200
+
+ API: Teach the storage layer about SATA and MMC options.
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+ Acked-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 6b73b754f782e1ecce5048bf20b22ce56a07a5b8
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Mon Jul 28 20:37:48 2008 +0200
+
+ API: Dump contents of sector 0 in the demo application.
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+ Acked-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 13ca6305f2eba49c175f6370c35286141059c789
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Mon Jul 28 20:37:10 2008 +0200
+
+ API: Correct storage enumeration routine, other minor fixes in API storage area.
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+ Acked-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 05c7fe0f049b1c9eb9a1992f27e5e350d865f4a8
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Mon Jul 28 20:36:19 2008 +0200
+
+ API: Fix compilation warnings in api_examples/demo.c.
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+
+commit c14eefcc48212af2f3314809605698dd8393a90a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Jul 27 17:09:43 2008 +0200
+
+ Fix more printf() format warnings
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 936897d4d1365452bbbdf8430db5e7769ef08d38
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Jul 25 15:18:16 2008 +0200
+
+ Fix remaining CFG_CMD_ define, ifdef and comments
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 5d1d00fb36005482e1803a00ddc46efa11d719af
+Author: Stefano Babic <sbabic@denx.de>
+Date: Fri Jul 25 08:57:40 2008 +0200
+
+ Add include for config.h in command.h.
+
+ Because the cmd_tbl_s structure depends on the configuration file, it
+ must be assured that config.h is included before the structure is
+ evaluated by the compiler. If this is not certain, it could happen
+ that the compiler generates structures of different size, depending
+ on the fact if the source file includes <config.h> before or after
+ <command.h>.
+
+ The effect is that u-boot crashes when tries to relocate the command
+ table (for ppc) or try to access to the command table for other
+ architectures.
+
+ The problem can happen on board-depending commands. All general
+ commands under /common are unaffected, because they include already
+ config.h before command.h.
+
+ Signed-off-by: Stefano Babic <sbabic@denx.de>
+
+commit 2dacb734bac9dba1db9e704d3e0b200ef521c79a
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Jul 23 13:16:06 2008 -0500
+
+ NAND: $(obj)-qualify ecc.h in kilauea NAND boot Makefile.
+
+ This fixes building out-of-tree.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 36d59bd9da9e15d19b867b48449408830f4e2ad5
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Jul 23 07:30:46 2008 +0200
+
+ Fix warnings if compiling with IDE support.
+
+ cmd_ide.c:827: Warnung: weak declaration of `ide_outb' after first use results in unspecified behavior
+ cmd_ide.c:839: Warnung: weak declaration of `ide_inb' after first use results in unspecified behavior
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 7610db17fd4d59c51d825488526d85ede2f06767
+Author: Adrian Filipi <adrian.filipi@eurotech.com>
+Date: Tue Jul 22 14:28:11 2008 -0400
+
+ Removed support for the adsvix board.
+
+ Support for the adsvix was originally provided by Applied Data
+ Systems (ADS), inc., now EuroTech, Inc.
+ The board never shipped aside from some sample boards.
+
+ Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
+
+commit f96b44cef897bd372beb86dde1b33637c119d84d
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Tue Jul 22 16:22:11 2008 +0200
+
+ ARM: set GD_FLG_RELOC for boards skipping relocation to RAM
+
+ If CONFIG_SKIP_RELOCATE_UBOOT is set the flag GD_FLG_RELOC is usually
+ never set, because relocation to RAM is actually never done by U-boot
+ itself. However, several pieces of code check if this flag is set at
+ some time.
+
+ So, to make sure this flag is set on boards skipping relocation, this
+ is added to the initialisation of U-boot at a moment where it is safe
+ to do so.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit e4dafff86f289b5677143a3e41da7b45c6d27fc7
+Author: Timur Tabi <timur@freescale.com>
+Date: Mon Jul 21 14:26:23 2008 -0500
+
+ fsl-i2c: fix writes to data segment before relocation
+
+ Prevent i2c_init() in fsl_i2c.c from writing to the data segment before
+ relocation. Commit d8c82db4 added the ability for i2c_init() to program the
+ I2C bus speed and save the value in i2c_bus_speed[], which is a global
+ variable. It is an error to write to the data segment before relocation,
+ which is what i2c_init() does when it stores the bus speed in i2c_bus_speed[].
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit dbd32387920e5ad6f9dd58a7b5012bbabe2a6a21
+Author: Wolfgang Ocker <weo@reccoware.de>
+Date: Mon Jul 28 16:56:51 2008 +0200
+
+ mips: Fix baudrate divisor computation on alchemy cpus
+
+ Use CFG_MIPS_TIMER_FREQ when computing the baudrate divisor
+ on alchemy cpus.
+
+ Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit a229d291f33308ab7761d39f25fa1a53c0fc00a2
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed Jul 23 10:55:46 2008 +0200
+
+ spi flash: Fix printf() format warnings
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 252a5e0738bcafaf25f7fbb40f19a59abc2cb13e
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed Jul 23 10:55:31 2008 +0200
+
+ atmel_mci: Fix printf() format warnings
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 7f4b009f4232d57084ce0ec5aeb3b57bccb08e4c
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed Jul 23 10:55:15 2008 +0200
+
+ avr32: Fix printf() format warnings
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit a79c3e8d9c31db25d5ca3ec8e08a97f323410dd4
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed Jul 23 10:52:19 2008 +0200
+
+ avr32: asm/io.h needs asm/types.h
+
+ map_physmem() takes a phys_addr_t as parameter. This type is defined in
+ asm/types.h, so we need to include that file.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 1953d128fd07f07d1c3810a28c0863ea64dae1b6
+Author: Michal Simek <monstr@monstr.eu>
+Date: Thu Jul 17 12:25:46 2008 +0200
+
+ microblaze: Fix printf() format issues
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit de2a07e534f18b1ca5f9869a4ef0604ca829cff0
+Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
+Date: Thu Jul 17 07:27:51 2008 +0530
+
+ Remove unused code from lib_arm/bootm.c
+
+ Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
+
+commit ffbb5cb942e9856fa24e946977e0a60c64df04ab
+Author: Detlev Zundel <dzu@denx.de>
+Date: Wed Jul 16 18:56:45 2008 +0200
+
+ tqm85xx: Demystify 'DK: !!!' comment
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit b2f44ba570f3a01113bbb745daf46f3858d22f53
+Author: Detlev Zundel <dzu@denx.de>
+Date: Wed Jul 16 18:56:44 2008 +0200
+
+ 83xx/85xx/86xx: Add LTEDR local bus definitions
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit f13f64cf42d5abec3e0f920233f6a7a61e7ae494
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Wed Jul 16 16:22:32 2008 +0200
+
+ serial_xuartlite.c: fix compiler warnings
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 86446d3a5d9d3ca81e85d1ccd3accaaae6f8e3c9
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jul 18 11:03:35 2008 +0200
+
+ POST: Add disable interrupts in some of the missing CPU POST tests
+
+ Some CPU POST tests did not disable the interrupts while running. This
+ seems to be necessary to protect this self modifying code.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 97a3bf268d096e0e97e54048448c35114edcf557
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jul 18 10:43:24 2008 +0200
+
+ ide: Use CFG_64BIT_LBA instead of CFG_64BIT_STRTOUL
+
+ This is needed for boards that define CFG_64BIT_STRTOUL but don't define
+ CFG_64BIT_LBA.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0043ac55024963295fc79b39af85b6dc3b261e17
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Fri Jul 18 11:22:23 2008 +0200
+
+ POST PPC4xx/spr IVPR only if PPC440
+
+ The SPR IVPR register is only present (as far as I know) for
+ processors with a PPC440 core.
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 1092fbd64748dfa2e979b102611ece9bc5ec1855
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jul 18 10:42:29 2008 +0200
+
+ ppc4xx: Enable 64bit printf format on 440/460 platforms
+
+ This patch defines CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL for all
+ 440/460 platforms. This may be needed since those platforms support
+ 36bit physical address space.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 66fe183b1dd9c7534605147a8ecfed1c02345ee5
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jul 18 15:57:23 2008 +0200
+
+ ppc4xx: Fix incorrect MODTx setup for some DIMM configurations
+
+ This patch fixes a problem with incorrect MODTx (On Die Termination)
+ setup for a configuration with multiple DIMM's and multiple ranks.
+ Without this change Katmai was unable to boot Linux with DDR2 frequency
+ >= 533MHz and mem>=3GB. With this patch Katmai successfully boots Linux
+ with DDR2 frequency = 640MHz and mem=4GB.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 340ccb260f21516be360745d5c5e3bd0657698df
+Author: Sebastian Siewior <bigeasy@linutronix.de>
+Date: Wed Jul 16 20:04:49 2008 +0200
+
+ cfi_flash: fix flash on BE machines with CFG_WRITE_SWAPPED_DATA
+
+ This got broken by commits 93c56f212c
+ [cfi_flash: support of long cmd in U-boot.]
+
+ That command needs to be in little endian format on BE machines
+ with CFG_WRITE_SWAPPED_DATA. Without this patch, the command 0xf0
+ gets saved on stack as 0x00 00 00 f0 and 0x00 gets written into
+ the cmdbuf in case portwidth = chipwidth = 8bit.
+
+ Cc: Alexey Korolev <akorolev@infradead.org>
+ Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
+ Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
+
+commit 699f05125509249072a0b865c8d35520d97cd501
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Jul 15 22:22:44 2008 +0200
+
+ Prepare v1.3.4-rc1: Code cleanup, update CHANGELOG, sort Makefile
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
commit bcab74baa6b1b1c969038ab6f64a186239180405
Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Date: Tue Jul 15 11:23:02 2008 -0400
diff --git a/MAKEALL b/MAKEALL
index 2948387..ac4195f 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -543,7 +543,6 @@
#########################################################################
LIST_pxa=" \
- adsvix \
cerf250 \
cradle \
csb226 \
diff --git a/Makefile b/Makefile
index ea572cf..92410ba 100644
--- a/Makefile
+++ b/Makefile
@@ -24,7 +24,7 @@
VERSION = 1
PATCHLEVEL = 3
SUBLEVEL = 4
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
VERSION_FILE = $(obj)include/version_autogenerated.h
@@ -346,10 +346,9 @@
cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
$(ONENAND_IPL): $(VERSION_FILE) $(obj)include/autoconf.mk
- $(MAKE) -C $(obj)onenand_ipl/board/$(BOARDDIR) all
+ $(MAKE) -C onenand_ipl/board/$(BOARDDIR) all
$(U_BOOT_ONENAND): $(ONENAND_IPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
- $(MAKE) -C $(obj)onenand_ipl/board/$(BOARDDIR) all
cat $(obj)onenand_ipl/onenand-ipl-2k.bin $(obj)u-boot.bin > $(obj)u-boot-onenand.bin
cat $(obj)onenand_ipl/onenand-ipl-4k.bin $(obj)u-boot.bin > $(obj)u-boot-flexonenand.bin
@@ -2609,9 +2608,6 @@
actux4_config : unconfig
@$(MKCONFIG) $(@:_config=) arm ixp actux4
-adsvix_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm pxa adsvix
-
cerf250_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa cerf250
@@ -2678,6 +2674,7 @@
apollon_config : unconfig
@mkdir -p $(obj)include
+ @mkdir -p $(obj)onenand_ipl/board/apollon
@echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
@$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx
@echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
diff --git a/api/api_storage.c b/api/api_storage.c
index 7e63240..74391a5 100644
--- a/api/api_storage.c
+++ b/api/api_storage.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2007 Semihalf
+ * (C) Copyright 2007-2008 Semihalf
*
* Written by: Rafal Jaworowski <raj@semihalf.com>
*
@@ -46,14 +46,15 @@
#define ENUM_USB 1
#define ENUM_SCSI 2
#define ENUM_MMC 3
-#define ENUM_MAX 4
+#define ENUM_SATA 4
+#define ENUM_MAX 5
struct stor_spec {
int max_dev;
int enum_started;
int enum_ended;
int type; /* "external" type: DT_STOR_{IDE,USB,etc} */
- char name[4];
+ char *name;
};
static struct stor_spec specs[ENUM_MAX] = { { 0, 0, 0, 0, "" }, };
@@ -68,12 +69,19 @@
specs[ENUM_IDE].type = DEV_TYP_STOR | DT_STOR_IDE;
specs[ENUM_IDE].name = "ide";
#endif
-#if defined(CONFIG_CMD_USB)
- specs[ENUM_USB].max_dev = USB_MAX_STOR_DEV;
- specs[ENUM_USB].enum_started = 0;
- specs[ENUM_USB].enum_ended = 0;
- specs[ENUM_USB].type = DEV_TYP_STOR | DT_STOR_USB;
- specs[ENUM_USB].name = "usb";
+#if defined(CONFIG_CMD_MMC)
+ specs[ENUM_MMC].max_dev = CFG_MMC_MAX_DEVICE;
+ specs[ENUM_MMC].enum_started = 0;
+ specs[ENUM_MMC].enum_ended = 0;
+ specs[ENUM_MMC].type = DEV_TYP_STOR | DT_STOR_MMC;
+ specs[ENUM_MMC].name = "mmc";
+#endif
+#if defined(CONFIG_CMD_SATA)
+ specs[ENUM_SATA].max_dev = CFG_SATA_MAX_DEVICE;
+ specs[ENUM_SATA].enum_started = 0;
+ specs[ENUM_SATA].enum_ended = 0;
+ specs[ENUM_SATA].type = DEV_TYP_STOR | DT_STOR_SATA;
+ specs[ENUM_SATA].name = "sata";
#endif
#if defined(CONFIG_CMD_SCSI)
specs[ENUM_SCSI].max_dev = CFG_SCSI_MAX_DEVICE;
@@ -82,6 +90,13 @@
specs[ENUM_SCSI].type = DEV_TYP_STOR | DT_STOR_SCSI;
specs[ENUM_SCSI].name = "scsi";
#endif
+#if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE)
+ specs[ENUM_USB].max_dev = USB_MAX_STOR_DEV;
+ specs[ENUM_USB].enum_started = 0;
+ specs[ENUM_USB].enum_ended = 0;
+ specs[ENUM_USB].type = DEV_TYP_STOR | DT_STOR_USB;
+ specs[ENUM_USB].name = "usb";
+#endif
}
/*
@@ -108,7 +123,10 @@
if (first) {
di->cookie = (void *)get_dev(specs[type].name, 0);
- found = 1;
+ if (di->cookie == NULL)
+ return 0;
+ else
+ found = 1;
} else {
for (i = 0; i < specs[type].max_dev; i++)
@@ -123,7 +141,10 @@
}
di->cookie = (void *)get_dev(specs[type].name, i);
- found = 1;
+ if (di->cookie == NULL)
+ return 0;
+ else
+ found = 1;
/* provide hint if there are more devices in
* this group to enumerate */
@@ -360,7 +381,7 @@
return 0;
if ((dd->block_read) == NULL) {
- debugf("no block_read() for device 0x%08x\n");
+ debugf("no block_read() for device 0x%08x\n", cookie);
return 0;
}
diff --git a/api_examples/demo.c b/api_examples/demo.c
index eae9712..69ac318 100644
--- a/api_examples/demo.c
+++ b/api_examples/demo.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2007 Semihalf
+ * (C) Copyright 2007-2008 Semihalf
*
* Written by: Rafal Jaworowski <raj@semihalf.com>
*
@@ -31,13 +31,15 @@
#define errf(fmt, args...) do { printf("ERROR @ %s(): ", __func__); printf(fmt, ##args); } while (0)
-void test_dump_si(struct sys_info *);
+#define BUF_SZ 2048
+#define WAIT_SECS 5
+
+void test_dump_buf(void *, int);
void test_dump_di(int);
+void test_dump_si(struct sys_info *);
void test_dump_sig(struct api_signature *);
-char buf[2048];
-
-#define WAIT_SECS 5
+static char buf[BUF_SZ];
int main(int argc, char *argv[])
{
@@ -58,11 +60,12 @@
if (sig->version > API_SIG_VERSION)
return -3;
- printf("API signature found @%x\n", sig);
+ printf("API signature found @%x\n", (unsigned int)sig);
test_dump_sig(sig);
printf("\n*** Consumer API test ***\n");
- printf("syscall ptr 0x%08x@%08x\n", syscall_ptr, &syscall_ptr);
+ printf("syscall ptr 0x%08x@%08x\n", (unsigned int)syscall_ptr,
+ (unsigned int)&syscall_ptr);
/* console activities */
ub_putc('B');
@@ -125,11 +128,17 @@
if (i == devs_no)
printf("No storage devices available\n");
else {
+ memset(buf, 0, BUF_SZ);
+
if ((rv = ub_dev_open(i)) != 0)
errf("open device %d error %d\n", i, rv);
- else if ((rv = ub_dev_read(i, &buf, 200, 20)) != 0)
+
+ else if ((rv = ub_dev_read(i, buf, 1, 0)) != 0)
errf("could not read from device %d, error %d\n", i, rv);
+ printf("Sector 0 dump (512B):\n");
+ test_dump_buf(buf, 512);
+
ub_dev_close(i);
}
@@ -180,7 +189,7 @@
printf("signature:\n");
printf(" version\t= %d\n", sig->version);
printf(" checksum\t= 0x%08x\n", sig->checksum);
- printf(" sc entry\t= 0x%08x\n", sig->syscall);
+ printf(" sc entry\t= 0x%08x\n", (unsigned int)sig->syscall);
}
void test_dump_si(struct sys_info *si)
@@ -188,9 +197,9 @@
int i;
printf("sys info:\n");
- printf(" clkbus\t= 0x%08x\n", si->clk_bus);
- printf(" clkcpu\t= 0x%08x\n", si->clk_cpu);
- printf(" bar\t\t= 0x%08x\n", si->bar);
+ printf(" clkbus\t= 0x%08x\n", (unsigned int)si->clk_bus);
+ printf(" clkcpu\t= 0x%08x\n", (unsigned int)si->clk_cpu);
+ printf(" bar\t\t= 0x%08x\n", (unsigned int)si->bar);
printf("---\n");
for (i = 0; i < si->mr_no; i++) {
@@ -217,23 +226,56 @@
}
}
-static char * test_stor_typ(int type)
+static char *test_stor_typ(int type)
{
if (type & DT_STOR_IDE)
return "IDE";
+ if (type & DT_STOR_MMC)
+ return "MMC";
+
+ if (type & DT_STOR_SATA)
+ return "SATA";
+
if (type & DT_STOR_SCSI)
return "SCSI";
if (type & DT_STOR_USB)
return "USB";
- if (type & DT_STOR_MMC);
- return "MMC";
-
return "Unknown";
}
+void test_dump_buf(void *buf, int len)
+{
+ int i;
+ int line_counter = 0;
+ int sep_flag = 0;
+ int addr = 0;
+
+ printf("%07x:\t", addr);
+
+ for (i = 0; i < len; i++) {
+ if (line_counter++ > 15) {
+ line_counter = 0;
+ sep_flag = 0;
+ addr += 16;
+ i--;
+ printf("\n%07x:\t", addr);
+ continue;
+ }
+
+ if (sep_flag++ > 1) {
+ sep_flag = 1;
+ printf(" ");
+ }
+
+ printf("%02x", *((char *)buf++));
+ }
+
+ printf("\n");
+}
+
void test_dump_di(int handle)
{
int i;
@@ -252,7 +294,7 @@
} else if (di->type & DEV_TYP_STOR) {
printf(" type\t\t= %s\n", test_stor_typ(di->type));
- printf(" blk size\t\t= %d\n", di->di_stor.block_size);
- printf(" blk count\t\t= %d\n", di->di_stor.block_count);
+ printf(" blk size\t\t= %d\n", (unsigned int)di->di_stor.block_size);
+ printf(" blk count\t\t= %d\n", (unsigned int)di->di_stor.block_count);
}
}
diff --git a/board/adsvix/Makefile b/board/adsvix/Makefile
deleted file mode 100644
index 05601b4..0000000
--- a/board/adsvix/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).a
-
-COBJS := adsvix.o pcmcia.o
-SOBJS := lowlevel_init.o pxavoltage.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/adsvix/adsvix.c b/board/adsvix/adsvix.c
deleted file mode 100644
index c430d63..0000000
--- a/board/adsvix/adsvix.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * (C) Copyright 2004
- * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net
- *
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /* memory and cpu-speed are setup before relocation */
- /* so we do _nothing_ here */
-
- /* arch number of ADSVIX-Board */
- gd->bd->bi_arch_number = 620;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0xa000003c;
-
- return 0;
-}
-
-int board_late_init(void)
-{
- setenv("stdout", "serial");
- setenv("stderr", "serial");
- return 0;
-}
-
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
- gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
- gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
- gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
- gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
- gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
- gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
-
- return 0;
-}
diff --git a/board/adsvix/config.mk b/board/adsvix/config.mk
deleted file mode 100644
index 98be4eb..0000000
--- a/board/adsvix/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-TEXT_BASE = 0xa1700000
diff --git a/board/adsvix/lowlevel_init.S b/board/adsvix/lowlevel_init.S
deleted file mode 100644
index 8dea71c..0000000
--- a/board/adsvix/lowlevel_init.S
+++ /dev/null
@@ -1,466 +0,0 @@
-/*
- * This was originally from the Lubbock u-boot port.
- *
- * Most of this taken from Redboot hal_platform_setup.h with cleanup
- *
- * NOTE: I haven't clean this up considerably, just enough to get it
- * running. See hal_platform_setup.h for the source. See
- * board/cradle/lowlevel_init.S for another PXA250 setup that is
- * much cleaner.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/pxa-regs.h>
-
-/* wait for coprocessor write complete */
- .macro CPWAIT reg
- mrc p15,0,\reg,c2,c0,0
- mov \reg,\reg
- sub pc,pc,#4
- .endm
-
-
-/*
- * Memory setup
- */
-
-.globl lowlevel_init
-lowlevel_init:
-
- /* Set up GPIO pins first ----------------------------------------- */
-
- ldr r0, =GPSR0
- ldr r1, =CFG_GPSR0_VAL
- str r1, [r0]
-
- ldr r0, =GPSR1
- ldr r1, =CFG_GPSR1_VAL
- str r1, [r0]
-
- ldr r0, =GPSR2
- ldr r1, =CFG_GPSR2_VAL
- str r1, [r0]
-
- ldr r0, =GPSR3
- ldr r1, =CFG_GPSR3_VAL
- str r1, [r0]
-
- ldr r0, =GPCR0
- ldr r1, =CFG_GPCR0_VAL
- str r1, [r0]
-
- ldr r0, =GPCR1
- ldr r1, =CFG_GPCR1_VAL
- str r1, [r0]
-
- ldr r0, =GPCR2
- ldr r1, =CFG_GPCR2_VAL
- str r1, [r0]
-
- ldr r0, =GPCR3
- ldr r1, =CFG_GPCR3_VAL
- str r1, [r0]
-
- ldr r0, =GPDR0
- ldr r1, =CFG_GPDR0_VAL
- str r1, [r0]
-
- ldr r0, =GPDR1
- ldr r1, =CFG_GPDR1_VAL
- str r1, [r0]
-
- ldr r0, =GPDR2
- ldr r1, =CFG_GPDR2_VAL
- str r1, [r0]
-
- ldr r0, =GPDR3
- ldr r1, =CFG_GPDR3_VAL
- str r1, [r0]
-
- ldr r0, =GAFR0_L
- ldr r1, =CFG_GAFR0_L_VAL
- str r1, [r0]
-
- ldr r0, =GAFR0_U
- ldr r1, =CFG_GAFR0_U_VAL
- str r1, [r0]
-
- ldr r0, =GAFR1_L
- ldr r1, =CFG_GAFR1_L_VAL
- str r1, [r0]
-
- ldr r0, =GAFR1_U
- ldr r1, =CFG_GAFR1_U_VAL
- str r1, [r0]
-
- ldr r0, =GAFR2_L
- ldr r1, =CFG_GAFR2_L_VAL
- str r1, [r0]
-
- ldr r0, =GAFR2_U
- ldr r1, =CFG_GAFR2_U_VAL
- str r1, [r0]
-
- ldr r0, =GAFR3_L
- ldr r1, =CFG_GAFR3_L_VAL
- str r1, [r0]
-
- ldr r0, =GAFR3_U
- ldr r1, =CFG_GAFR3_U_VAL
- str r1, [r0]
-
- ldr r0, =PSSR /* enable GPIO pins */
- ldr r1, =CFG_PSSR_VAL
- str r1, [r0]
-
- /* ---------------------------------------------------------------- */
- /* Enable memory interface */
- /* */
- /* The sequence below is based on the recommended init steps */
- /* detailed in the Intel PXA250 Operating Systems Developers Guide, */
- /* Chapter 10. */
- /* ---------------------------------------------------------------- */
-
- /* ---------------------------------------------------------------- */
- /* Step 1: Wait for at least 200 microsedonds to allow internal */
- /* clocks to settle. Only necessary after hard reset... */
- /* FIXME: can be optimized later */
- /* ---------------------------------------------------------------- */
-
- ldr r3, =OSCR /* reset the OS Timer Count to zero */
- mov r2, #0
- str r2, [r3]
- ldr r4, =0x300 /* really 0x2E1 is about 200usec, */
- /* so 0x300 should be plenty */
-1:
- ldr r2, [r3]
- cmp r4, r2
- bgt 1b
-
-mem_init:
-
- ldr r1, =MEMC_BASE /* get memory controller base addr. */
-
- /* ---------------------------------------------------------------- */
- /* Step 2a: Initialize Asynchronous static memory controller */
- /* ---------------------------------------------------------------- */
-
- /* MSC registers: timing, bus width, mem type */
-
- /* MSC0: nCS(0,1) */
- ldr r2, =CFG_MSC0_VAL
- str r2, [r1, #MSC0_OFFSET]
- ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */
- /* that data latches */
- /* MSC1: nCS(2,3) */
- ldr r2, =CFG_MSC1_VAL
- str r2, [r1, #MSC1_OFFSET]
- ldr r2, [r1, #MSC1_OFFSET]
-
- /* MSC2: nCS(4,5) */
- ldr r2, =CFG_MSC2_VAL
- str r2, [r1, #MSC2_OFFSET]
- ldr r2, [r1, #MSC2_OFFSET]
-
- /* ---------------------------------------------------------------- */
- /* Step 2b: Initialize Card Interface */
- /* ---------------------------------------------------------------- */
-
- /* MECR: Memory Expansion Card Register */
- ldr r2, =CFG_MECR_VAL
- str r2, [r1, #MECR_OFFSET]
- ldr r2, [r1, #MECR_OFFSET]
-
- /* MCMEM0: Card Interface slot 0 timing */
- ldr r2, =CFG_MCMEM0_VAL
- str r2, [r1, #MCMEM0_OFFSET]
- ldr r2, [r1, #MCMEM0_OFFSET]
-
- /* MCMEM1: Card Interface slot 1 timing */
- ldr r2, =CFG_MCMEM1_VAL
- str r2, [r1, #MCMEM1_OFFSET]
- ldr r2, [r1, #MCMEM1_OFFSET]
-
- /* MCATT0: Card Interface Attribute Space Timing, slot 0 */
- ldr r2, =CFG_MCATT0_VAL
- str r2, [r1, #MCATT0_OFFSET]
- ldr r2, [r1, #MCATT0_OFFSET]
-
- /* MCATT1: Card Interface Attribute Space Timing, slot 1 */
- ldr r2, =CFG_MCATT1_VAL
- str r2, [r1, #MCATT1_OFFSET]
- ldr r2, [r1, #MCATT1_OFFSET]
-
- /* MCIO0: Card Interface I/O Space Timing, slot 0 */
- ldr r2, =CFG_MCIO0_VAL
- str r2, [r1, #MCIO0_OFFSET]
- ldr r2, [r1, #MCIO0_OFFSET]
-
- /* MCIO1: Card Interface I/O Space Timing, slot 1 */
- ldr r2, =CFG_MCIO1_VAL
- str r2, [r1, #MCIO1_OFFSET]
- ldr r2, [r1, #MCIO1_OFFSET]
-
- /* ---------------------------------------------------------------- */
- /* Step 2c: Write FLYCNFG FIXME: what's that??? */
- /* ---------------------------------------------------------------- */
- ldr r2, =CFG_FLYCNFG_VAL
- str r2, [r1, #FLYCNFG_OFFSET]
- str r2, [r1, #FLYCNFG_OFFSET]
-
- /* ---------------------------------------------------------------- */
- /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */
- /* ---------------------------------------------------------------- */
-
- /* Before accessing MDREFR we need a valid DRI field, so we set */
- /* this to power on defaults + DRI field. */
-
- ldr r4, [r1, #MDREFR_OFFSET]
- ldr r2, =0xFFF
- bic r4, r4, r2
-
- ldr r3, =CFG_MDREFR_VAL
- and r3, r3, r2
-
- orr r4, r4, r3
- str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */
-
- orr r4, r4, #MDREFR_K0RUN
- orr r4, r4, #MDREFR_K0DB4
- orr r4, r4, #MDREFR_K0FREE
- orr r4, r4, #MDREFR_K0DB2
- orr r4, r4, #MDREFR_K1DB2
- bic r4, r4, #MDREFR_K1FREE
- bic r4, r4, #MDREFR_K2FREE
-
- str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */
- ldr r4, [r1, #MDREFR_OFFSET]
-
- /* Note: preserve the mdrefr value in r4 */
-
-
- /* ---------------------------------------------------------------- */
- /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */
- /* ---------------------------------------------------------------- */
-
- /* Initialize SXCNFG register. Assert the enable bits */
-
- /* Write SXMRS to cause an MRS command to all enabled banks of */
- /* synchronous static memory. Note that SXLCR need not be written */
- /* at this time. */
-
- ldr r2, =CFG_SXCNFG_VAL
- str r2, [r1, #SXCNFG_OFFSET]
-
- /* ---------------------------------------------------------------- */
- /* Step 4: Initialize SDRAM */
- /* ---------------------------------------------------------------- */
-
- bic r4, r4, #(MDREFR_K2FREE |MDREFR_K1FREE | MDREFR_K0FREE)
-
- orr r4, r4, #MDREFR_K1RUN
- bic r4, r4, #MDREFR_K2DB2
- str r4, [r1, #MDREFR_OFFSET]
- ldr r4, [r1, #MDREFR_OFFSET]
-
- bic r4, r4, #MDREFR_SLFRSH
- str r4, [r1, #MDREFR_OFFSET]
- ldr r4, [r1, #MDREFR_OFFSET]
-
- orr r4, r4, #MDREFR_E1PIN
- str r4, [r1, #MDREFR_OFFSET]
- ldr r4, [r1, #MDREFR_OFFSET]
-
- nop
- nop
-
-
- /* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */
- /* configure but not enable each SDRAM partition pair. */
-
- ldr r4, =CFG_MDCNFG_VAL
- bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1)
- bic r4, r4, #(MDCNFG_DE2|MDCNFG_DE3)
-
- str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */
- ldr r4, [r1, #MDCNFG_OFFSET]
-
-
- /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */
- /* 100..200 µsec. */
-
- ldr r3, =OSCR /* reset the OS Timer Count to zero */
- mov r2, #0
- str r2, [r3]
- ldr r4, =0x300 /* really 0x2E1 is about 200usec, */
- /* so 0x300 should be plenty */
-1:
- ldr r2, [r3]
- cmp r4, r2
- bgt 1b
-
-
- /* Step 4f: Trigger a number (usually 8) refresh cycles by */
- /* attempting non-burst read or write accesses to disabled */
- /* SDRAM, as commonly specified in the power up sequence */
- /* documented in SDRAM data sheets. The address(es) used */
- /* for this purpose must not be cacheable. */
-
- ldr r3, =CFG_DRAM_BASE
- str r2, [r3]
- str r2, [r3]
- str r2, [r3]
- str r2, [r3]
- str r2, [r3]
- str r2, [r3]
- str r2, [r3]
- str r2, [r3]
-
-
- /* Step 4g: Write MDCNFG with enable bits asserted */
- /* (MDCNFG:DEx set to 1). */
-
- ldr r3, [r1, #MDCNFG_OFFSET]
- mov r4, r3
- orr r3, r3, #MDCNFG_DE0
- str r3, [r1, #MDCNFG_OFFSET]
- mov r0, r3
-
- /* Step 4h: Write MDMRS. */
-
- ldr r2, =CFG_MDMRS_VAL
- str r2, [r1, #MDMRS_OFFSET]
-
- /* enable APD */
- ldr r3, [r1, #MDREFR_OFFSET]
- orr r3, r3, #MDREFR_APD
- str r3, [r1, #MDREFR_OFFSET]
-
- /* We are finished with Intel's memory controller initialisation */
-
-setvoltage:
-
- mov r10, lr
- bl initPXAvoltage /* In case the board is rebooting with a */
- mov lr, r10 /* low voltage raise it up to a good one. */
-
-wakeup:
- /* Are we waking from sleep? */
- ldr r0, =RCSR
- ldr r1, [r0]
- and r1, r1, #(RCSR_GPR | RCSR_SMR | RCSR_WDR | RCSR_HWR)
- str r1, [r0]
- teq r1, #RCSR_SMR
-
- bne initirqs
-
- ldr r0, =PSSR
- mov r1, #PSSR_PH
- str r1, [r0]
-
- /* if so, resume at PSPR */
- ldr r0, =PSPR
- ldr r1, [r0]
- mov pc, r1
-
- /* ---------------------------------------------------------------- */
- /* Disable (mask) all interrupts at interrupt controller */
- /* ---------------------------------------------------------------- */
-
-initirqs:
-
- mov r1, #0 /* clear int. level register (IRQ, not FIQ) */
- ldr r2, =ICLR
- str r1, [r2]
-
- ldr r2, =ICMR /* mask all interrupts at the controller */
- str r1, [r2]
-
- /* ---------------------------------------------------------------- */
- /* Clock initialisation */
- /* ---------------------------------------------------------------- */
-
-initclks:
-
- /* Disable the peripheral clocks, and set the core clock frequency */
-
- /* Turn Off on-chip peripheral clocks (except for memory) */
- /* for re-configuration. */
- ldr r1, =CKEN
- ldr r2, =CFG_CKEN
- str r2, [r1]
-
- /* ... and write the core clock config register */
- ldr r2, =CFG_CCCR
- ldr r1, =CCCR
- str r2, [r1]
-
- /* Turn on turbo mode */
- mrc p14, 0, r2, c6, c0, 0
- orr r2, r2, #0xB /* Turbo, Fast-Bus, Freq change**/
- mcr p14, 0, r2, c6, c0, 0
-
- /* Re-write MDREFR */
- ldr r1, =MEMC_BASE
- ldr r2, [r1, #MDREFR_OFFSET]
- str r2, [r1, #MDREFR_OFFSET]
-#ifdef RTC
- /* enable the 32Khz oscillator for RTC and PowerManager */
- ldr r1, =OSCC
- mov r2, #OSCC_OON
- str r2, [r1]
-
- /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */
- /* has settled. */
-60:
- ldr r2, [r1]
- ands r2, r2, #1
- beq 60b
-#else
-#error "RTC not defined"
-#endif
-
- /* Interrupt init: Mask all interrupts */
- ldr r0, =ICMR /* enable no sources */
- mov r1, #0
- str r1, [r0]
- /* FIXME */
-
-#ifdef NODEBUG
- /*Disable software and data breakpoints */
- mov r0,#0
- mcr p15,0,r0,c14,c8,0 /* ibcr0 */
- mcr p15,0,r0,c14,c9,0 /* ibcr1 */
- mcr p15,0,r0,c14,c4,0 /* dbcon */
-
- /*Enable all debug functionality */
- mov r0,#0x80000000
- mcr p14,0,r0,c10,c0,0 /* dcsr */
-#endif
-
- /* ---------------------------------------------------------------- */
- /* End lowlevel_init */
- /* ---------------------------------------------------------------- */
-
-endlowlevel_init:
-
- mov pc, lr
diff --git a/board/adsvix/pcmcia.c b/board/adsvix/pcmcia.c
deleted file mode 100644
index ba5be01..0000000
--- a/board/adsvix/pcmcia.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * (C) Copyright 2004
- * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/pxa-regs.h>
-
-void pcmcia_power_on(void)
-{
-#if 0
- if (!(GPLR(20) & GPIO_bit(20))) { /* 3.3V */
- GPCR(81) = GPIO_bit(81);
- GPSR(82) = GPIO_bit(82);
- }
- else if (!(GPLR(21) & GPIO_bit(21))) { /* 5.0V */
- GPCR(81) = GPIO_bit(81);
- GPCR(82) = GPIO_bit(82);
- }
-#else
-#warning "Board will only supply 5V, wait for next HW spin for selectable power"
- /* 5.0V */
- GPCR(81) = GPIO_bit(81);
- GPCR(82) = GPIO_bit(82);
-#endif
-
- udelay(300000);
-
- /* reset the card */
- GPSR(52) = GPIO_bit(52);
-
- /* enable PCMCIA */
- GPCR(83) = GPIO_bit(83);
-
- /* clear reset */
- udelay(10);
- GPCR(52) = GPIO_bit(52);
-
- udelay(20000);
-}
-
-void pcmcia_power_off(void)
-{
- /* 0V */
- GPSR(81) = GPIO_bit(81);
- GPSR(82) = GPIO_bit(82);
- /* disable PCMCIA */
- GPSR(83) = GPIO_bit(83);
-}
diff --git a/board/adsvix/pxavoltage.S b/board/adsvix/pxavoltage.S
deleted file mode 100644
index 2fe1cab..0000000
--- a/board/adsvix/pxavoltage.S
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * (C) Copyright 2004
- * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <asm/arch/pxa-regs.h>
-
-#define LTC1663_ADDR 0x20
-
-#define LTC1663_SY 0x01 /* Sync ACK */
-#define LTC1663_SD 0x04 /* shutdown */
-#define LTC1663_BG 0x04 /* Internal Voltage Ref */
-
-#define VOLT_1_55 18 /* DAC value for 1.55V */
-
- .global initPXAvoltage
-
-@ Set the voltage to 1.55V early in the boot process so we can run
-@ at a high clock speed and boot quickly. Note that this is necessary
-@ because the reset button does not reset the CPU voltage, so if the
-@ voltage was low (say 0.85V) then the CPU would crash without this
-@ routine
-
-@ This routine clobbers r0-r4
-
-initializei2c:
-
- ldr r2, =CKEN
- ldr r3, [r2]
- orr r3, r3, #CKEN15_PWRI2C
- str r3, [r2]
-
- ldr r2, =PCFR
- ldr r3, [r2]
- orr r3, r3, #PCFR_PI2C_EN
- str r3, [r2]
-
- /* delay for about 250msec
- */
- ldr r3, =OSCR
- mov r2, #0
- str r2, [r3]
- ldr r1, =0xC0000
-
-1:
- ldr r2, [r3]
- cmp r1, r2
- bgt 1b
- ldr r0, =PWRICR
- ldr r1, [r0]
- bic r1, r1, #(ICR_MA | ICR_START | ICR_STOP)
- str r1, [r0]
-
- orr r1, r1, #ICR_UR
- str r1, [r0]
-
- ldr r2, =PWRISR
- ldr r3, =0x7ff
- str r3, [r2]
-
- bic r1, r1, #ICR_UR
- str r1, [r0]
-
- mov r1, #(ICR_GCD | ICR_SCLE)
- str r1, [r0]
-
- orr r1, r1, #ICR_IUE
- str r1, [r0]
-
- orr r1, r1, #ICR_FM
- str r1, [r0]
-
- /* delay for about 1msec
- */
- ldr r3, =OSCR
- mov r2, #0
- str r2, [r3]
- ldr r1, =0xC00
-
-1:
- ldr r2, [r3]
- cmp r1, r2
- bgt 1b
- mov pc, lr
-
-sendbytei2c:
- ldr r3, =PWRIDBR
- str r0, [r3]
- ldr r3, =PWRICR
- ldr r0, [r3]
- orr r0, r0, r1
- bic r0, r0, r2
- str r0, [r3]
- orr r0, r0, #ICR_TB
- str r0, [r3]
-
- mov r2, #0x100000
-
-waitfortxemptyi2c:
-
- ldr r0, =PWRISR
- ldr r1, [r0]
-
- /* take it from the top if we don't get empty after a while */
- subs r2, r2, #1
- moveq lr, r4
- beq initPXAvoltage
-
- tst r1, #ISR_ITE
-
- beq waitfortxemptyi2c
-
- orr r1, r1, #ISR_ITE
- str r1, [r0]
-
- mov pc, lr
-
-initPXAvoltage:
-
- mov r4, lr
-
- bl setleds
-
- bl initializei2c
-
- bl setleds
-
- /* now send the real message to set the correct voltage */
- ldr r0, =LTC1663_ADDR
- mov r0, r0, LSL #1
- mov r1, #ICR_START
- ldr r2, =(ICR_STOP | ICR_ALDIE | ICR_ACKNAK)
- bl sendbytei2c
-
- bl setleds
-
- mov r0, #LTC1663_BG
- mov r1, #0
- mov r2, #(ICR_STOP | ICR_START)
- bl sendbytei2c
-
- bl setleds
-
- ldr r0, =VOLT_1_55
- and r0, r0, #0xff
- mov r1, #0
- mov r2, #(ICR_STOP | ICR_START)
- bl sendbytei2c
-
- bl setleds
-
- ldr r0, =VOLT_1_55
- mov r0, r0, ASR #8
- and r0, r0, #0xff
- mov r1, #ICR_STOP
- mov r2, #ICR_START
- bl sendbytei2c
-
- bl setleds
-
- @ delay a little for the volatage to stablize
- ldr r3, =OSCR
- mov r2, #0
- str r2, [r3]
- ldr r1, =0xC0
-
-1:
- ldr r2, [r3]
- cmp r1, r2
- bgt 1b
- mov pc, r4
-
-setleds:
- mov pc, lr
-
- ldr r5, =0x40e00058
- ldr r3, [r5]
- bic r3, r3, #0x3
- str r3, [r5]
- ldr r5, =0x40e0000c
- ldr r3, [r5]
- orr r3, r3, #0x00010000
- str r3, [r5]
-
- @ inner loop
- mov r0, #0x2
-1:
-
- ldr r5, =0x40e00018
- mov r3, #0x00010000
- str r3, [r5]
-
- @ outer loop
- mov r3, #0x00F00000
-2:
- subs r3, r3, #1
- bne 2b
-
- ldr r5, =0x40e00024
- mov r3, #0x00010000
- str r3, [r5]
-
- @ outer loop
- mov r3, #0x00F00000
-3:
- subs r3, r3, #1
- bne 3b
-
- subs r0, r0, #1
- bne 1b
-
- mov pc, lr
diff --git a/board/adsvix/u-boot.lds b/board/adsvix/u-boot.lds
deleted file mode 100644
index 14d264a..0000000
--- a/board/adsvix/u-boot.lds
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
- . = 0x00000000;
-
- . = ALIGN(4);
- .text :
- {
- cpu/pxa/start.o (.text)
- *(.text)
- }
-
- . = ALIGN(4);
- .rodata : { *(.rodata) }
-
- . = ALIGN(4);
- .data : { *(.data) }
-
- . = ALIGN(4);
- .got : { *(.got) }
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
- . = ALIGN(4);
- __bss_start = .;
- .bss (NOLOAD) : { *(.bss) }
- _end = .;
-}
diff --git a/board/atmel/atngw100/atngw100.c b/board/atmel/atngw100/atngw100.c
index f2c3e79..4ead533 100644
--- a/board/atmel/atngw100/atngw100.c
+++ b/board/atmel/atngw100/atngw100.c
@@ -81,7 +81,7 @@
unmap_physmem(sdram_base, EBI_SDRAM_SIZE);
if (expected_size != actual_size)
- printf("Warning: Only %u of %u MiB SDRAM is working\n",
+ printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
actual_size >> 20, expected_size >> 20);
return actual_size;
diff --git a/board/atmel/atstk1000/atstk1000.c b/board/atmel/atstk1000/atstk1000.c
index 6371e2d..d284fc1 100644
--- a/board/atmel/atstk1000/atstk1000.c
+++ b/board/atmel/atstk1000/atstk1000.c
@@ -104,7 +104,7 @@
unmap_physmem(sdram_base, EBI_SDRAM_SIZE);
if (expected_size != actual_size)
- printf("Warning: Only %u of %u MiB SDRAM is working\n",
+ printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
actual_size >> 20, expected_size >> 20);
return actual_size;
diff --git a/board/atmel/atstk1000/flash.c b/board/atmel/atstk1000/flash.c
index 12537f3..e2bfd4a 100644
--- a/board/atmel/atstk1000/flash.c
+++ b/board/atmel/atstk1000/flash.c
@@ -70,7 +70,7 @@
void flash_print_info(flash_info_t *info)
{
- printf("Flash: Vendor ID: 0x%02x, Product ID: 0x%02x\n",
+ printf("Flash: Vendor ID: 0x%02lx, Product ID: 0x%02lx\n",
info->flash_id >> 16, info->flash_id & 0xffff);
printf("Size: %ld MB in %d sectors\n",
info->size >> 10, info->sector_count);
diff --git a/board/esd/common/flash.c b/board/esd/common/flash.c
index dca10be..bda361e 100644
--- a/board/esd/common/flash.c
+++ b/board/esd/common/flash.c
@@ -22,7 +22,9 @@
*/
#include <common.h>
+#ifdef __PPC__
#include <ppc4xx.h>
+#endif
#include <asm/processor.h>
flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
diff --git a/board/freescale/m5275evb/Makefile b/board/freescale/m5275evb/Makefile
index f337a75..74c2528 100644
--- a/board/freescale/m5275evb/Makefile
+++ b/board/freescale/m5275evb/Makefile
@@ -25,7 +25,7 @@
LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o mii.o
+COBJS = $(BOARD).o mii.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/mpc8540ads/u-boot.lds b/board/freescale/mpc8540ads/u-boot.lds
index f200810..0e4f5a2 100644
--- a/board/freescale/mpc8540ads/u-boot.lds
+++ b/board/freescale/mpc8540ads/u-boot.lds
@@ -2,6 +2,8 @@
* (C) Copyright 2002,2003, Motorola,Inc.
* Xianghua Xiao, X.Xiao@motorola.com.
*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -26,16 +28,6 @@
__DYNAMIC = 0; */
SECTIONS
{
- .resetvec 0xFFFFFFFC :
- {
- *(.resetvec)
- } = 0xffff
-
- .bootpg 0xFFFFF000 :
- {
- cpu/mpc85xx/start.o (.bootpg)
- } = 0xffff
-
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
.interp : { *(.interp) }
@@ -62,17 +54,6 @@
.plt : { *(.plt) }
.text :
{
- cpu/mpc85xx/start.o (.text)
- cpu/mpc85xx/traps.o (.text)
- cpu/mpc85xx/interrupts.o (.text)
- cpu/mpc85xx/cpu_init.o (.text)
- cpu/mpc85xx/cpu.o (.text)
- cpu/mpc85xx/speed.o (.text)
- cpu/mpc85xx/pci.o (.text)
- common/dlmalloc.o (.text)
- lib_generic/crc32.o (.text)
- lib_ppc/extable.o (.text)
- lib_generic/zlib.o (.text)
*(.text)
*(.fixup)
*(.got1)
@@ -134,6 +115,18 @@
. = ALIGN(256);
__init_end = .;
+ .bootpg ADDR(.text) + 0x7f000 :
+ {
+ cpu/mpc85xx/start.o (.bootpg)
+ } = 0xffff
+
+ .resetvec ADDR(.text) + 0x7fffc :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ . = ADDR(.text) + 0x80000;
+
__bss_start = .;
.bss (NOLOAD) :
{
@@ -142,6 +135,8 @@
*(.bss)
*(COMMON)
}
+
+ . = ALIGN(4);
_end = . ;
PROVIDE (end = .);
}
diff --git a/board/freescale/mpc8541cds/u-boot.lds b/board/freescale/mpc8541cds/u-boot.lds
index 5f4dcf0..1c583de 100644
--- a/board/freescale/mpc8541cds/u-boot.lds
+++ b/board/freescale/mpc8541cds/u-boot.lds
@@ -1,5 +1,5 @@
/*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2004, 2008 Freescale Semiconductor.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -25,16 +25,6 @@
__DYNAMIC = 0; */
SECTIONS
{
- .resetvec 0xFFFFFFFC :
- {
- *(.resetvec)
- } = 0xffff
-
- .bootpg 0xFFFFF000 :
- {
- cpu/mpc85xx/start.o (.bootpg)
- } = 0xffff
-
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
.interp : { *(.interp) }
@@ -61,18 +51,6 @@
.plt : { *(.plt) }
.text :
{
- cpu/mpc85xx/start.o (.text)
- cpu/mpc85xx/traps.o (.text)
- cpu/mpc85xx/interrupts.o (.text)
- cpu/mpc85xx/cpu_init.o (.text)
- cpu/mpc85xx/cpu.o (.text)
- drivers/net/tsec.o (.text)
- cpu/mpc85xx/speed.o (.text)
- cpu/mpc85xx/pci.o (.text)
- common/dlmalloc.o (.text)
- lib_generic/crc32.o (.text)
- lib_ppc/extable.o (.text)
- lib_generic/zlib.o (.text)
*(.text)
*(.fixup)
*(.got1)
@@ -134,6 +112,18 @@
. = ALIGN(256);
__init_end = .;
+ .bootpg ADDR(.text) + 0x7f000 :
+ {
+ cpu/mpc85xx/start.o (.bootpg)
+ } = 0xffff
+
+ .resetvec ADDR(.text) + 0x7fffc :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ . = ADDR(.text) + 0x80000;
+
__bss_start = .;
.bss (NOLOAD) :
{
@@ -142,6 +132,8 @@
*(.bss)
*(COMMON)
}
+
+ . = ALIGN(4);
_end = . ;
PROVIDE (end = .);
}
diff --git a/board/freescale/mpc8544ds/u-boot.lds b/board/freescale/mpc8544ds/u-boot.lds
index c66c69f..500e647 100644
--- a/board/freescale/mpc8544ds/u-boot.lds
+++ b/board/freescale/mpc8544ds/u-boot.lds
@@ -1,5 +1,5 @@
/*
- * Copyright 2007 Freescale Semiconductor, Inc.
+ * Copyright 2007-2008 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -25,16 +25,6 @@
__DYNAMIC = 0; */
SECTIONS
{
- .resetvec 0xFFFFFFFC :
- {
- *(.resetvec)
- } = 0xffff
-
- .bootpg 0xFFFFF000 :
- {
- cpu/mpc85xx/start.o (.bootpg)
- } = 0xffff
-
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
.interp : { *(.interp) }
@@ -61,17 +51,6 @@
.plt : { *(.plt) }
.text :
{
- cpu/mpc85xx/start.o (.text)
- cpu/mpc85xx/traps.o (.text)
- cpu/mpc85xx/interrupts.o (.text)
- cpu/mpc85xx/cpu_init.o (.text)
- cpu/mpc85xx/cpu.o (.text)
- cpu/mpc85xx/speed.o (.text)
- common/dlmalloc.o (.text)
- lib_generic/crc32.o (.text)
- lib_ppc/extable.o (.text)
- lib_generic/zlib.o (.text)
- drivers/bios_emulator/atibios.o (.text)
*(.text)
*(.fixup)
*(.got1)
@@ -133,6 +112,18 @@
. = ALIGN(256);
__init_end = .;
+ .bootpg ADDR(.text) + 0x7f000 :
+ {
+ cpu/mpc85xx/start.o (.bootpg)
+ } = 0xffff
+
+ .resetvec ADDR(.text) + 0x7fffc :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ . = ADDR(.text) + 0x80000;
+
__bss_start = .;
.bss (NOLOAD) :
{
@@ -141,6 +132,8 @@
*(.bss)
*(COMMON)
}
+
+ . = ALIGN(4);
_end = . ;
PROVIDE (end = .);
}
diff --git a/board/freescale/mpc8548cds/u-boot.lds b/board/freescale/mpc8548cds/u-boot.lds
index eba7e8a..6b93395 100644
--- a/board/freescale/mpc8548cds/u-boot.lds
+++ b/board/freescale/mpc8548cds/u-boot.lds
@@ -1,5 +1,5 @@
/*
- * Copyright 2004, 2007 Freescale Semiconductor.
+ * Copyright 2004, 2007-2008 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -25,16 +25,6 @@
__DYNAMIC = 0; */
SECTIONS
{
- .resetvec 0xFFFFFFFC :
- {
- *(.resetvec)
- } = 0xffff
-
- .bootpg 0xFFFFF000 :
- {
- cpu/mpc85xx/start.o (.bootpg)
- } = 0xffff
-
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
.interp : { *(.interp) }
@@ -61,17 +51,6 @@
.plt : { *(.plt) }
.text :
{
- cpu/mpc85xx/start.o (.text)
- cpu/mpc85xx/traps.o (.text)
- cpu/mpc85xx/interrupts.o (.text)
- cpu/mpc85xx/cpu_init.o (.text)
- cpu/mpc85xx/cpu.o (.text)
- drivers/net/tsec.o (.text)
- cpu/mpc85xx/speed.o (.text)
- common/dlmalloc.o (.text)
- lib_generic/crc32.o (.text)
- lib_ppc/extable.o (.text)
- lib_generic/zlib.o (.text)
*(.text)
*(.fixup)
*(.got1)
@@ -133,6 +112,18 @@
. = ALIGN(256);
__init_end = .;
+ .bootpg ADDR(.text) + 0x7f000 :
+ {
+ cpu/mpc85xx/start.o (.bootpg)
+ } = 0xffff
+
+ .resetvec ADDR(.text) + 0x7fffc :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ . = ADDR(.text) + 0x80000;
+
__bss_start = .;
.bss (NOLOAD) :
{
@@ -141,6 +132,8 @@
*(.bss)
*(COMMON)
}
+
+ . = ALIGN(4);
_end = . ;
PROVIDE (end = .);
}
diff --git a/board/freescale/mpc8555cds/u-boot.lds b/board/freescale/mpc8555cds/u-boot.lds
index 5f4dcf0..a18b3a7 100644
--- a/board/freescale/mpc8555cds/u-boot.lds
+++ b/board/freescale/mpc8555cds/u-boot.lds
@@ -1,5 +1,5 @@
/*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2004, 2008 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -25,16 +25,6 @@
__DYNAMIC = 0; */
SECTIONS
{
- .resetvec 0xFFFFFFFC :
- {
- *(.resetvec)
- } = 0xffff
-
- .bootpg 0xFFFFF000 :
- {
- cpu/mpc85xx/start.o (.bootpg)
- } = 0xffff
-
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
.interp : { *(.interp) }
@@ -61,18 +51,6 @@
.plt : { *(.plt) }
.text :
{
- cpu/mpc85xx/start.o (.text)
- cpu/mpc85xx/traps.o (.text)
- cpu/mpc85xx/interrupts.o (.text)
- cpu/mpc85xx/cpu_init.o (.text)
- cpu/mpc85xx/cpu.o (.text)
- drivers/net/tsec.o (.text)
- cpu/mpc85xx/speed.o (.text)
- cpu/mpc85xx/pci.o (.text)
- common/dlmalloc.o (.text)
- lib_generic/crc32.o (.text)
- lib_ppc/extable.o (.text)
- lib_generic/zlib.o (.text)
*(.text)
*(.fixup)
*(.got1)
@@ -134,6 +112,18 @@
. = ALIGN(256);
__init_end = .;
+ .bootpg ADDR(.text) + 0x7f000 :
+ {
+ cpu/mpc85xx/start.o (.bootpg)
+ } = 0xffff
+
+ .resetvec ADDR(.text) + 0x7fffc :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ . = ADDR(.text) + 0x80000;
+
__bss_start = .;
.bss (NOLOAD) :
{
@@ -142,6 +132,8 @@
*(.bss)
*(COMMON)
}
+
+ . = ALIGN(4);
_end = . ;
PROVIDE (end = .);
}
diff --git a/board/freescale/mpc8560ads/u-boot.lds b/board/freescale/mpc8560ads/u-boot.lds
index cb30ea9..0e4f5a2 100644
--- a/board/freescale/mpc8560ads/u-boot.lds
+++ b/board/freescale/mpc8560ads/u-boot.lds
@@ -1,7 +1,9 @@
/*
- * (C) Copyright 2002,2003,Motorola,Inc.
+ * (C) Copyright 2002,2003, Motorola,Inc.
* Xianghua Xiao, X.Xiao@motorola.com.
*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -26,16 +28,6 @@
__DYNAMIC = 0; */
SECTIONS
{
- .resetvec 0xFFFFFFFC :
- {
- *(.resetvec)
- } = 0xffff
-
- .bootpg 0xFFFFF000 :
- {
- cpu/mpc85xx/start.o (.bootpg)
- } = 0xffff
-
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
.interp : { *(.interp) }
@@ -62,20 +54,6 @@
.plt : { *(.plt) }
.text :
{
- cpu/mpc85xx/start.o (.text)
- cpu/mpc85xx/commproc.o (.text)
- cpu/mpc85xx/traps.o (.text)
- cpu/mpc85xx/interrupts.o (.text)
- cpu/mpc85xx/serial_scc.o (.text)
- cpu/mpc85xx/ether_fcc.o (.text)
- cpu/mpc85xx/cpu_init.o (.text)
- cpu/mpc85xx/cpu.o (.text)
- cpu/mpc85xx/speed.o (.text)
- cpu/mpc85xx/spd_sdram.o (.text)
- common/dlmalloc.o (.text)
- lib_generic/crc32.o (.text)
- lib_ppc/extable.o (.text)
- lib_generic/zlib.o (.text)
*(.text)
*(.fixup)
*(.got1)
@@ -137,6 +115,18 @@
. = ALIGN(256);
__init_end = .;
+ .bootpg ADDR(.text) + 0x7f000 :
+ {
+ cpu/mpc85xx/start.o (.bootpg)
+ } = 0xffff
+
+ .resetvec ADDR(.text) + 0x7fffc :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ . = ADDR(.text) + 0x80000;
+
__bss_start = .;
.bss (NOLOAD) :
{
@@ -145,6 +135,8 @@
*(.bss)
*(COMMON)
}
+
+ . = ALIGN(4);
_end = . ;
PROVIDE (end = .);
}
diff --git a/board/freescale/mpc8568mds/u-boot.lds b/board/freescale/mpc8568mds/u-boot.lds
index 1b83834..9d245e4 100644
--- a/board/freescale/mpc8568mds/u-boot.lds
+++ b/board/freescale/mpc8568mds/u-boot.lds
@@ -1,5 +1,5 @@
/*
- * Copyright 2004-2007 Freescale Semiconductor.
+ * Copyright 2004-2008 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -23,21 +23,8 @@
OUTPUT_ARCH(powerpc)
/* Do we need any of these for elf?
__DYNAMIC = 0; */
-
SECTIONS
{
- /* ELIOR - From RAM: From FLASH: 0xFFFFFFFC*/
- .resetvec 0xFFFFFFFC:
- {
- *(.resetvec)
- } = 0xffff
-
- /*(ELIOR - From RAM: From FLASH: 0xFFFFF000*/
- .bootpg 0xFFFFF000:
- {
- cpu/mpc85xx/start.o (.bootpg)
- } = 0xffff
-
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
.interp : { *(.interp) }
@@ -64,17 +51,6 @@
.plt : { *(.plt) }
.text :
{
- cpu/mpc85xx/start.o (.text)
- cpu/mpc85xx/traps.o (.text)
- cpu/mpc85xx/interrupts.o (.text)
- cpu/mpc85xx/cpu_init.o (.text)
- cpu/mpc85xx/cpu.o (.text)
- cpu/mpc85xx/speed.o (.text)
- cpu/mpc85xx/pci.o (.text)
- common/dlmalloc.o (.text)
- lib_generic/crc32.o (.text)
- lib_ppc/extable.o (.text)
- lib_generic/zlib.o (.text)
*(.text)
*(.fixup)
*(.got1)
@@ -136,6 +112,18 @@
. = ALIGN(256);
__init_end = .;
+ .bootpg ADDR(.text) + 0x7f000 :
+ {
+ cpu/mpc85xx/start.o (.bootpg)
+ } = 0xffff
+
+ .resetvec ADDR(.text) + 0x7fffc :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ . = ADDR(.text) + 0x80000;
+
__bss_start = .;
.bss (NOLOAD) :
{
@@ -144,6 +132,8 @@
*(.bss)
*(COMMON)
}
+
+ . = ALIGN(4);
_end = . ;
PROVIDE (end = .);
}
diff --git a/board/idmr/mii.c b/board/idmr/mii.c
index f130e6e..78a7028 100644
--- a/board/idmr/mii.c
+++ b/board/idmr/mii.c
@@ -200,7 +200,7 @@
}
#endif /* CFG_DISCOVER_PHY */
-int mii_init(void) __attribute__((weak,alias("__mii_init")));
+void mii_init(void) __attribute__((weak,alias("__mii_init")));
void __mii_init(void)
{
diff --git a/board/ids8247/ids8247.c b/board/ids8247/ids8247.c
index 44fc79c..065014a 100644
--- a/board/ids8247/ids8247.c
+++ b/board/ids8247/ids8247.c
@@ -321,7 +321,7 @@
printf ("%4lu MB\n", totlen >>20);
}
-#endif /* CFG_CMD_NAND */
+#endif /* CONFIG_CMD_NAND */
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
/*
diff --git a/board/matrix_vision/mvbc_p/mvbc_p.c b/board/matrix_vision/mvbc_p/mvbc_p.c
index b61e84e..5c71dec 100644
--- a/board/matrix_vision/mvbc_p/mvbc_p.c
+++ b/board/matrix_vision/mvbc_p/mvbc_p.c
@@ -32,6 +32,7 @@
#include <malloc.h>
#include <pci.h>
#include <i2c.h>
+#include <fpga.h>
#include <environment.h>
#include <fdt_support.h>
#include <asm/io.h>
@@ -109,7 +110,7 @@
struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO;
printf("Ports : 0x%08x\n", gpio->port_config);
- printf("PORCFG: 0x%08x\n", *(vu_long*)MPC5XXX_CDM_PORCFG);
+ printf("PORCFG: 0x%08lx\n", *(vu_long*)MPC5XXX_CDM_PORCFG);
out_be32(&gpio->simple_ddr, SIMPLE_DDR);
out_be32(&gpio->simple_dvo, SIMPLE_DVO);
diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c
index f1c2e58..ae3c245 100644
--- a/board/tqc/tqm85xx/tqm85xx.c
+++ b/board/tqc/tqm85xx/tqm85xx.c
@@ -464,7 +464,8 @@
if (lbc_mhz < 66) {
lbc->lcrr = CFG_LBC_LCRR | LCRR_DBYP; /* DLL Bypass */
- lbc->ltedr = 0xa4c80000; /* DK: !!! */
+ lbc->ltedr = LTEDR_BMD | LTEDR_PARD | LTEDR_WPD | LTEDR_WARA |
+ LTEDR_RAWA | LTEDR_CSD; /* Disable all error checking */
} else if (lbc_mhz >= 133) {
lbc->lcrr = CFG_LBC_LCRR & (~LCRR_DBYP); /* DLL Enabled */
diff --git a/board/w7o/post2.c b/board/w7o/post2.c
index e590128..6ee33eb 100644
--- a/board/w7o/post2.c
+++ b/board/w7o/post2.c
@@ -29,6 +29,12 @@
#include "errors.h"
#include "dtt.h"
+/* for LM75 DTT POST test */
+#define DTT_READ_TEMP 0x0
+#define DTT_CONFIG 0x1
+#define DTT_TEMP_HYST 0x2
+#define DTT_TEMP_SET 0x3
+
#if defined(CONFIG_RTC_M48T35A)
void rtctest(void)
{
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index caa467d..24ff9b9 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -205,7 +205,7 @@
puts ("\nip_addr = ");
print_IPaddr (bd->bi_ip_addr);
#endif
- printf ("\nbaudrate = %d bps\n", (ulong)bd->bi_baudrate);
+ printf ("\nbaudrate = %ld bps\n", (ulong)bd->bi_baudrate);
return 0;
}
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index 1c0a416..18d7100 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -36,7 +36,7 @@
#include <lmb.h>
#include <asm/byteorder.h>
-#if (CONFIG_COMMANDS & CFG_CMD_USB)
+#if defined(CONFIG_CMD_USB)
#include <usb.h>
#endif
@@ -217,7 +217,7 @@
*/
iflag = disable_interrupts();
-#if (CONFIG_COMMANDS & CFG_CMD_USB)
+#if defined(CONFIG_CMD_USB)
/*
* turn off USB to prevent the host controller from writing to the
* SDRAM while Linux is booting. This could happen (at least for OHCI
@@ -251,10 +251,9 @@
memmove_wd ((void *)load_start,
(void *)os_data, os_len, CHUNKSZ);
-
- load_end = load_start + os_len;
- puts("OK\n");
}
+ load_end = load_start + os_len;
+ puts("OK\n");
break;
case IH_COMP_GZIP:
printf (" Uncompressing %s ... ", type_name);
diff --git a/common/cmd_flash.c b/common/cmd_flash.c
index a7f66dd..18d2250 100644
--- a/common/cmd_flash.c
+++ b/common/cmd_flash.c
@@ -342,7 +342,7 @@
puts ("Bad sector specification\n");
return 1;
}
- printf ("Erase Flash Sectors %d-%d in Bank # %d ",
+ printf ("Erase Flash Sectors %d-%d in Bank # %zu ",
sect_first, sect_last, (info-flash_info)+1);
rcode = flash_erase(info, sect_first, sect_last);
return rcode;
@@ -534,7 +534,7 @@
puts ("Bad sector specification\n");
return 1;
}
- printf("%sProtect Flash Sectors %d-%d in Bank # %d\n",
+ printf("%sProtect Flash Sectors %d-%d in Bank # %zu\n",
p ? "" : "Un-", sect_first, sect_last,
(info-flash_info)+1);
for (i = sect_first; i <= sect_last; i++) {
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index 97a873d..d6ba79f 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -161,8 +161,6 @@
#define IDE_SPIN_UP_TIME_OUT 5000 /* 5 sec spin-up timeout */
-void inline ide_outb(int dev, int port, unsigned char val);
-unsigned char inline ide_inb(int dev, int port);
static void input_data(int dev, ulong *sect_buf, int words);
static void output_data(int dev, ulong *sect_buf, int words);
static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len);
@@ -298,7 +296,7 @@
ulong addr = simple_strtoul(argv[2], NULL, 16);
ulong cnt = simple_strtoul(argv[4], NULL, 16);
ulong n;
-#ifdef CFG_64BIT_STRTOUL
+#ifdef CFG_64BIT_LBA
lbaint_t blk = simple_strtoull(argv[3], NULL, 16);
printf ("\nIDE read: device %d block # %qd, count %ld ... ",
@@ -327,7 +325,7 @@
ulong addr = simple_strtoul(argv[2], NULL, 16);
ulong cnt = simple_strtoul(argv[4], NULL, 16);
ulong n;
-#ifdef CFG_64BIT_STRTOUL
+#ifdef CFG_64BIT_LBA
lbaint_t blk = simple_strtoull(argv[3], NULL, 16);
printf ("\nIDE write: device %d block # %qd, count %ld ... ",
@@ -523,6 +521,28 @@
/* ------------------------------------------------------------------------- */
+void inline
+__ide_outb(int dev, int port, unsigned char val)
+{
+ debug ("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n",
+ dev, port, val, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)));
+ outb(val, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)));
+}
+void inline ide_outb (int dev, int port, unsigned char val)
+ __attribute__((weak, alias("__ide_outb")));
+
+unsigned char inline
+__ide_inb(int dev, int port)
+{
+ uchar val;
+ val = inb((ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)));
+ debug ("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n",
+ dev, port, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)), val);
+ return val;
+}
+unsigned char inline ide_inb(int dev, int port)
+ __attribute__((weak, alias("__ide_inb")));
+
void ide_init (void)
{
@@ -817,28 +837,6 @@
/* ------------------------------------------------------------------------- */
-void inline
-__ide_outb(int dev, int port, unsigned char val)
-{
- debug ("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n",
- dev, port, val, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)));
- outb(val, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)));
-}
-void inline ide_outb (int dev, int port, unsigned char val)
- __attribute__((weak, alias("__ide_outb")));
-
-unsigned char inline
-__ide_inb(int dev, int port)
-{
- uchar val;
- val = inb((ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)));
- debug ("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n",
- dev, port, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)), val);
- return val;
-}
-unsigned char inline ide_inb(int dev, int port)
- __attribute__((weak, alias("__ide_inb")));
-
#ifdef __PPC__
# ifdef CONFIG_AMIGAONEG3SE
static void
diff --git a/common/cmd_mfsl.c b/common/cmd_mfsl.c
index 5982b76..c2442ee 100644
--- a/common/cmd_mfsl.c
+++ b/common/cmd_mfsl.c
@@ -183,7 +183,7 @@
return 1;
}
- printf ("%01x: 0x%08lx - %s %s read\n", fslnum, num,
+ printf ("%01x: 0x%08x - %s %s read\n", fslnum, num,
blocking < 2 ? "non blocking" : "blocking",
((blocking == 1) || (blocking == 3)) ? "control" : "data" );
return 0;
@@ -341,7 +341,7 @@
return 1;
}
- printf ("%01x: 0x%08lx - %s %s write\n", fslnum, num,
+ printf ("%01x: 0x%08x - %s %s write\n", fslnum, num,
blocking < 2 ? "non blocking" : "blocking",
((blocking == 1) || (blocking == 3)) ? "control" : "data" );
return 0;
@@ -382,7 +382,7 @@
puts ("Unsupported register\n");
return 1;
}
- printf (": 0x%08lx\n", val);
+ printf (": 0x%08x\n", val);
return 0;
}
diff --git a/common/dlmalloc.c b/common/dlmalloc.c
index c51351e..4a18562 100644
--- a/common/dlmalloc.c
+++ b/common/dlmalloc.c
@@ -1457,7 +1457,7 @@
indexing, maintain locality, and avoid some initialization tests.
*/
-#define top (bin_at(0)->fd) /* The topmost chunk */
+#define top (av_[2]) /* The topmost chunk */
#define last_remainder (bin_at(1)) /* remainder from last split */
@@ -1552,13 +1552,14 @@
#define BINBLOCKWIDTH 4 /* bins per block */
-#define binblocks (bin_at(0)->size) /* bitvector of nonempty blocks */
+#define binblocks_r ((INTERNAL_SIZE_T)av_[1]) /* bitvector of nonempty blocks */
+#define binblocks_w (av_[1])
/* bin<->block macros */
#define idx2binblock(ix) ((unsigned)1 << (ix / BINBLOCKWIDTH))
-#define mark_binblock(ii) (binblocks |= idx2binblock(ii))
-#define clear_binblock(ii) (binblocks &= ~(idx2binblock(ii)))
+#define mark_binblock(ii) (binblocks_w = (mbinptr)(binblocks_r | idx2binblock(ii)))
+#define clear_binblock(ii) (binblocks_w = (mbinptr)(binblocks_r & ~(idx2binblock(ii))))
@@ -2250,17 +2251,17 @@
search for best fitting chunk by scanning bins in blockwidth units.
*/
- if ( (block = idx2binblock(idx)) <= binblocks)
+ if ( (block = idx2binblock(idx)) <= binblocks_r)
{
/* Get to the first marked block */
- if ( (block & binblocks) == 0)
+ if ( (block & binblocks_r) == 0)
{
/* force to an even block boundary */
idx = (idx & ~(BINBLOCKWIDTH - 1)) + BINBLOCKWIDTH;
block <<= 1;
- while ((block & binblocks) == 0)
+ while ((block & binblocks_r) == 0)
{
idx += BINBLOCKWIDTH;
block <<= 1;
@@ -2315,7 +2316,7 @@
{
if ((startidx & (BINBLOCKWIDTH - 1)) == 0)
{
- binblocks &= ~block;
+ av_[1] = (mbinptr)(binblocks_r & ~block);
break;
}
--startidx;
@@ -2324,9 +2325,9 @@
/* Get to the next possibly nonempty block */
- if ( (block <<= 1) <= binblocks && (block != 0) )
+ if ( (block <<= 1) <= binblocks_r && (block != 0) )
{
- while ((block & binblocks) == 0)
+ while ((block & binblocks_r) == 0)
{
idx += BINBLOCKWIDTH;
block <<= 1;
diff --git a/common/lcd.c b/common/lcd.c
index eec1f53..e3347ec 100644
--- a/common/lcd.c
+++ b/common/lcd.c
@@ -678,6 +678,7 @@
/* Set color map */
for (i=0; i<colors; ++i) {
bmp_color_table_entry_t cte = bmp->color_table[i];
+#if !defined(CONFIG_ATMEL_LCD)
ushort colreg =
( ((cte.red) << 8) & 0xf800) |
( ((cte.green) << 3) & 0x07e0) |
@@ -692,6 +693,9 @@
#elif defined(CONFIG_MPC823)
cmap--;
#endif
+#else /* CONFIG_ATMEL_LCD */
+ lcd_setcolreg(i, cte.red, cte.green, cte.blue);
+#endif
}
}
#endif
@@ -727,7 +731,7 @@
for (i = 0; i < height; ++i) {
WATCHDOG_RESET();
for (j = 0; j < width ; j++)
-#if defined(CONFIG_PXA250)
+#if defined(CONFIG_PXA250) || defined(CONFIG_ATMEL_LCD)
*(fb++) = *(bmap++);
#elif defined(CONFIG_MPC823) || defined(CONFIG_MCC200)
*(fb++)=255-*(bmap++);
@@ -740,6 +744,9 @@
}
#endif
+#ifdef CONFIG_VIDEO_BMP_GZIP
+extern bmp_image_t *gunzip_bmp(unsigned long addr, unsigned long *lenp);
+#endif
static void *lcd_logo (void)
{
@@ -761,6 +768,16 @@
addr = simple_strtoul(s, NULL, 16);
do_splash = 0;
+#ifdef CONFIG_VIDEO_BMP_GZIP
+ bmp_image_t *bmp = (bmp_image_t *)addr;
+ unsigned long len;
+
+ if (!((bmp->header.signature[0]=='B') &&
+ (bmp->header.signature[1]=='M'))) {
+ addr = (ulong)gunzip_bmp(addr, &len);
+ }
+#endif
+
if (lcd_display_bitmap (addr, 0, 0) == 0) {
return ((void *)lcd_base);
}
diff --git a/common/main.c b/common/main.c
index 79ad291..187ef8a 100644
--- a/common/main.c
+++ b/common/main.c
@@ -116,7 +116,7 @@
u_int i;
# ifdef CONFIG_AUTOBOOT_PROMPT
- printf(CONFIG_AUTOBOOT_PROMPT, bootdelay);
+ printf(CONFIG_AUTOBOOT_PROMPT);
# endif
# ifdef CONFIG_AUTOBOOT_DELAY_STR
@@ -212,7 +212,7 @@
int abort = 0;
#ifdef CONFIG_MENUPROMPT
- printf(CONFIG_MENUPROMPT, bootdelay);
+ printf(CONFIG_MENUPROMPT);
#else
printf("Hit any key to stop autoboot: %2d ", bootdelay);
#endif
diff --git a/cpu/microblaze/interrupts.c b/cpu/microblaze/interrupts.c
index 3f04b29..26e88cb 100644
--- a/cpu/microblaze/interrupts.c
+++ b/cpu/microblaze/interrupts.c
@@ -203,7 +203,7 @@
for (i = 0; i < CFG_INTC_0_NUM; i++) {
if (act->handler != (interrupt_handler_t*) def_hdlr) {
- printf ("%02d %08lx %08lx %d\n", i,
+ printf ("%02d %08x %08x %d\n", i,
(int)act->handler, (int)act->arg, act->count);
}
act++;
diff --git a/cpu/mips/au1x00_serial.c b/cpu/mips/au1x00_serial.c
index 6309794..e8baab5 100644
--- a/cpu/mips/au1x00_serial.c
+++ b/cpu/mips/au1x00_serial.c
@@ -76,7 +76,7 @@
sd = (*sys_powerctrl & 0x03) + 2;
/* calulate 2x baudrate and round */
- divisorx2 = ((CFG_HZ/(sd * 16 * CONFIG_BAUDRATE)));
+ divisorx2 = ((CFG_MIPS_TIMER_FREQ/(sd * 16 * CONFIG_BAUDRATE)));
if (divisorx2 & 0x01)
divisorx2 = divisorx2 + 1;
diff --git a/cpu/mpc8260/speed.c b/cpu/mpc8260/speed.c
index 38cd0d9..8d280fb 100644
--- a/cpu/mpc8260/speed.c
+++ b/cpu/mpc8260/speed.c
@@ -162,6 +162,30 @@
gd->cpu_clk = clkin;
}
+#ifdef CONFIG_PCI
+ gd->pci_clk = clkin;
+
+ if (sccr & SCCR_PCI_MODE) {
+ uint pci_div;
+ uint pcidf = (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT;
+
+ if (sccr & SCCR_PCI_MODCK) {
+ pci_div = 2;
+ if (pcidf == 9) {
+ pci_div *= 5;
+ } else if (pcidf == 0xB) {
+ pci_div *= 6;
+ } else {
+ pci_div *= (pcidf + 1);
+ }
+ } else {
+ pci_div = pcidf + 1;
+ }
+
+ gd->pci_clk = (gd->cpm_clk * 2) / pci_div;
+ }
+#endif
+
return (0);
}
@@ -220,26 +244,9 @@
printf (" - cpu_clk %10ld, cpm_clk %10ld, bus_clk %10ld\n",
gd->cpu_clk, gd->cpm_clk, gd->bus_clk);
-
- if (sccr & SCCR_PCI_MODE) {
- uint pci_div;
- uint pcidf = (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT;
-
- if (sccr & SCCR_PCI_MODCK) {
- pci_div = 2;
- if (pcidf == 9) {
- pci_div *= 5;
- } else if (pcidf == 0xB) {
- pci_div *= 6;
- } else {
- pci_div *= (pcidf + 1);
- }
- } else {
- pci_div = pcidf + 1;
- }
-
- printf (" - pci_clk %10ld\n", (gd->cpm_clk * 2) / pci_div);
- }
+#ifdef CONFIG_PCI
+ printf (" - pci_clk %10ld\n", gd->pci_clk);
+#endif
putc ('\n');
return (0);
diff --git a/cpu/nios2/interrupts.c b/cpu/nios2/interrupts.c
index aeb5b65..ec5db31 100644
--- a/cpu/nios2/interrupts.c
+++ b/cpu/nios2/interrupts.c
@@ -27,6 +27,7 @@
#include <nios2.h>
#include <nios2-io.h>
+#include <asm/types.h>
#include <asm/io.h>
#include <asm/ptrace.h>
#include <common.h>
diff --git a/cpu/nios2/sysid.c b/cpu/nios2/sysid.c
index b5a2959..697ed03 100644
--- a/cpu/nios2/sysid.c
+++ b/cpu/nios2/sysid.c
@@ -40,7 +40,7 @@
stamp = readl (&sysid->timestamp);
localtime_r (&stamp, &t);
asctime_r (&t, asc);
- printf ("SYSID : %08x, %s", readl (&sysid->id), asc);
+ printf ("SYSID : %08lx, %s", readl (&sysid->id), asc);
}
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index ec1765e..1c36324 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -1159,50 +1159,50 @@
if (dimm_type == SDRAM_DDR2) {
codt |= SDRAM_CODT_DQS_1_8_V_DDR2;
if ((total_dimm == 1) && (firstSlot == TRUE)) {
- if (total_rank == 1) {
+ if (total_rank == 1) { /* PUUU */
codt |= CALC_ODT_R(0);
modt0 = CALC_ODT_W(0);
modt1 = 0x00000000;
modt2 = 0x00000000;
modt3 = 0x00000000;
}
- if (total_rank == 2) {
+ if (total_rank == 2) { /* PPUU */
codt |= CALC_ODT_R(0) | CALC_ODT_R(1);
- modt0 = CALC_ODT_W(0);
- modt1 = CALC_ODT_W(0);
+ modt0 = CALC_ODT_W(0) | CALC_ODT_W(1);
+ modt1 = 0x00000000;
modt2 = 0x00000000;
modt3 = 0x00000000;
}
} else if ((total_dimm == 1) && (firstSlot != TRUE)) {
- if (total_rank == 1) {
+ if (total_rank == 1) { /* UUPU */
codt |= CALC_ODT_R(2);
modt0 = 0x00000000;
modt1 = 0x00000000;
modt2 = CALC_ODT_W(2);
modt3 = 0x00000000;
}
- if (total_rank == 2) {
+ if (total_rank == 2) { /* UUPP */
codt |= CALC_ODT_R(2) | CALC_ODT_R(3);
modt0 = 0x00000000;
modt1 = 0x00000000;
- modt2 = CALC_ODT_W(2);
- modt3 = CALC_ODT_W(2);
+ modt2 = CALC_ODT_W(2) | CALC_ODT_W(3);
+ modt3 = 0x00000000;
}
}
if (total_dimm == 2) {
- if (total_rank == 2) {
+ if (total_rank == 2) { /* PUPU */
codt |= CALC_ODT_R(0) | CALC_ODT_R(2);
modt0 = CALC_ODT_RW(2);
modt1 = 0x00000000;
modt2 = CALC_ODT_RW(0);
modt3 = 0x00000000;
}
- if (total_rank == 4) {
+ if (total_rank == 4) { /* PPPP */
codt |= CALC_ODT_R(0) | CALC_ODT_R(1) |
CALC_ODT_R(2) | CALC_ODT_R(3);
- modt0 = CALC_ODT_RW(2);
+ modt0 = CALC_ODT_RW(2) | CALC_ODT_RW(3);
modt1 = 0x00000000;
- modt2 = CALC_ODT_RW(0);
+ modt2 = CALC_ODT_RW(0) | CALC_ODT_RW(1);
modt3 = 0x00000000;
}
}
diff --git a/cpu/pxa/mmc.c b/cpu/pxa/mmc.c
index 2c86a01..121dcbe 100644
--- a/cpu/pxa/mmc.c
+++ b/cpu/pxa/mmc.c
@@ -559,11 +559,6 @@
set_GPIO_mode(GPIO8_MMCCS0_MD);
#endif
CKEN |= CKEN12_MMC; /* enable MMC unit clock */
-#if defined(CONFIG_ADSVIX)
- /* turn on the power */
- GPCR(114) = GPIO_bit(114);
- udelay(1000);
-#endif
MMC_CLKRT = MMC_CLKRT_0_3125MHZ;
MMC_RESTO = MMC_RES_TO_MAX;
diff --git a/doc/README.autoboot b/doc/README.autoboot
index e4c4186..2042fe5 100644
--- a/doc/README.autoboot
+++ b/doc/README.autoboot
@@ -114,10 +114,17 @@
CONFIG_AUTOBOOT_PROMPT is displayed before the boot delay
selected by CONFIG_BOOTDELAY starts. If it is not defined
there is no output indicating that autoboot is in progress.
- If "%d" is included, it is replaced by the number of seconds
- remaining before autoboot will start, but it does not count
- down the seconds. "autoboot in %d seconds\n" is a reasonable
- prompt.
+
+ Note that CONFIG_AUTOBOOT_PROMPT is used as the (only)
+ argument to a printf() call, so it may contain '%' format
+ specifications, provided that it also includes, sepearated by
+ commas exactly like in a printf statement, the required
+ arguments. It is the responsibility of the user to select only
+ such arguments that are valid in the given context. A
+ reasonable prompt could be defined as
+
+ #define CONFIG_AUTOBOOT_PROMPT \
+ "autoboot in %d seconds\n",bootdelay
If CONFIG_AUTOBOOT_DELAY_STR or "bootdelaykey" is specified
and this string is received from console input before
diff --git a/doc/README.qemu_mips b/doc/README.qemu_mips
index 476c5e6..c9ac3f3 100644
--- a/doc/README.qemu_mips
+++ b/doc/README.qemu_mips
@@ -15,4 +15,4 @@
# dd of=flash bs=1k count=4k if=/dev/zero
# dd of=flash bs=1k conv=notrunc if=u-boot.bin
start it:
-# qemu-system-mips -pflash flash -monitor null -nographic
+# qemu-system-mips -M mips -pflash flash -monitor null -nographic
diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c
index 9f2c1ec..3f78e2f 100644
--- a/drivers/i2c/fsl_i2c.c
+++ b/drivers/i2c/fsl_i2c.c
@@ -143,12 +143,15 @@
i2c_init(int speed, int slaveadd)
{
struct fsl_i2c *dev;
+ unsigned int temp;
dev = (struct fsl_i2c *) (CFG_IMMR + CFG_I2C_OFFSET);
writeb(0, &dev->cr); /* stop I2C controller */
udelay(5); /* let it shutdown in peace */
- i2c_bus_speed[0] = set_i2c_bus_speed(dev, gd->i2c1_clk, speed);
+ temp = set_i2c_bus_speed(dev, gd->i2c1_clk, speed);
+ if (gd->flags & GD_FLG_RELOC)
+ i2c_bus_speed[0] = temp;
writeb(slaveadd << 1, &dev->adr); /* write slave address */
writeb(0x0, &dev->sr); /* clear status register */
writeb(I2C_CR_MEN, &dev->cr); /* start I2C controller */
@@ -158,7 +161,9 @@
writeb(0, &dev->cr); /* stop I2C controller */
udelay(5); /* let it shutdown in peace */
- i2c_bus_speed[1] = set_i2c_bus_speed(dev, gd->i2c2_clk, speed);
+ temp = set_i2c_bus_speed(dev, gd->i2c2_clk, speed);
+ if (gd->flags & GD_FLG_RELOC)
+ i2c_bus_speed[1] = temp;
writeb(slaveadd << 1, &dev->adr); /* write slave address */
writeb(0x0, &dev->sr); /* clear status register */
writeb(I2C_CR_MEN, &dev->cr); /* start I2C controller */
@@ -168,12 +173,11 @@
static __inline__ int
i2c_wait4bus(void)
{
- ulong timeval = get_timer(0);
+ unsigned long long timeval = get_ticks();
while (readb(&i2c_dev[i2c_bus_num]->sr) & I2C_SR_MBB) {
- if (get_timer(timeval) > I2C_TIMEOUT) {
+ if ((get_ticks() - timeval) > usec2ticks(I2C_TIMEOUT))
return -1;
- }
}
return 0;
@@ -183,7 +187,7 @@
i2c_wait(int write)
{
u32 csr;
- ulong timeval = get_timer(0);
+ unsigned long long timeval = get_ticks();
do {
csr = readb(&i2c_dev[i2c_bus_num]->sr);
@@ -208,7 +212,7 @@
}
return 0;
- } while (get_timer (timeval) < I2C_TIMEOUT);
+ } while ((get_ticks() - timeval) < usec2ticks(I2C_TIMEOUT));
debug("i2c_wait: timed out\n");
return -1;
diff --git a/drivers/mmc/atmel_mci.c b/drivers/mmc/atmel_mci.c
index 61aa184..a151488 100644
--- a/drivers/mmc/atmel_mci.c
+++ b/drivers/mmc/atmel_mci.c
@@ -135,10 +135,10 @@
status = mmci_readl(SR);
} while (!(status & MMCI_BIT(CMDRDY)));
- pr_debug("mmc: status 0x%08lx\n", status);
+ pr_debug("mmc: status 0x%08x\n", status);
if (status & error_flags) {
- printf("mmc: command %lu failed (status: 0x%08lx)\n",
+ printf("mmc: command %lu failed (status: 0x%08x)\n",
cmd, status);
return -EIO;
}
@@ -245,7 +245,7 @@
read_error:
mmc_cmd(MMC_CMD_SEND_STATUS, mmc_rca << 16, &card_status, R1 | NCR);
- printf("mmc: bread failed, status = %08x, card status = %08x\n",
+ printf("mmc: bread failed, status = %08x, card status = %08lx\n",
status, card_status);
goto out;
}
@@ -284,13 +284,13 @@
static void mmc_dump_cid(const struct mmc_cid *cid)
{
- printf("Manufacturer ID: %02lX\n", cid->mid);
- printf("OEM/Application ID: %04lX\n", cid->oid);
+ printf("Manufacturer ID: %02X\n", cid->mid);
+ printf("OEM/Application ID: %04X\n", cid->oid);
printf("Product name: %s\n", cid->pnm);
- printf("Product Revision: %lu.%lu\n",
+ printf("Product Revision: %u.%u\n",
cid->prv >> 4, cid->prv & 0x0f);
printf("Product Serial Number: %lu\n", cid->psn);
- printf("Manufacturing Date: %02lu/%02lu\n",
+ printf("Manufacturing Date: %02u/%02u\n",
cid->mdt >> 4, cid->mdt & 0x0f);
}
@@ -501,7 +501,7 @@
mmc_blkdev.part_type = PART_TYPE_DOS;
mmc_blkdev.block_read = mmc_bread;
sprintf((char *)mmc_blkdev.vendor,
- "Man %02x%04x Snr %08x",
+ "Man %02x%04x Snr %08lx",
cid.mid, cid.oid, cid.psn);
strncpy((char *)mmc_blkdev.product, cid.pnm,
sizeof(mmc_blkdev.product));
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index 4340b1b..12647ef 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -306,6 +306,9 @@
int i;
int cword_offset;
int cp_offset;
+#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
+ u32 cmd_le = cpu_to_le32(cmd);
+#endif
uchar val;
uchar *cp = (uchar *) cmdbuf;
@@ -313,7 +316,7 @@
cword_offset = (info->portwidth-i)%info->chipwidth;
#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
cp_offset = info->portwidth - i;
- val = *((uchar*)&cmd + cword_offset);
+ val = *((uchar*)&cmd_le + cword_offset);
#else
cp_offset = i - 1;
val = *((uchar*)&cmd + sizeof(u32) - cword_offset - 1);
diff --git a/drivers/mtd/spi/atmel.c b/drivers/mtd/spi/atmel.c
index fb7a4a9..10fcf0c 100644
--- a/drivers/mtd/spi/atmel.c
+++ b/drivers/mtd/spi/atmel.c
@@ -205,7 +205,7 @@
byte_addr = 0;
}
- debug("SF: AT45: Successfully programmed %u bytes @ 0x%x\n",
+ debug("SF: AT45: Successfully programmed %zu bytes @ 0x%x\n",
len, offset);
ret = 0;
@@ -268,7 +268,7 @@
page_addr++;
}
- debug("SF: AT45: Successfully erased %u bytes @ 0x%x\n",
+ debug("SF: AT45: Successfully erased %zu bytes @ 0x%x\n",
len, offset);
ret = 0;
@@ -351,7 +351,7 @@
* params->blocks_per_sector
* params->nr_sectors;
- debug("SF: Detected %s with page size %u, total %u bytes\n",
+ debug("SF: Detected %s with page size %lu, total %u bytes\n",
params->name, page_size, asf->flash.size);
return &asf->flash;
diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c
index 060b518..c8b4e98 100644
--- a/drivers/net/e1000.c
+++ b/drivers/net/e1000.c
@@ -513,9 +513,11 @@
nic->enetaddr[5] += 1;
}
#ifdef CONFIG_E1000_FALLBACK_MAC
- if ( *(u32*)(nic->enetaddr) == 0 || *(u32*)(nic->enetaddr) == ~0 )
- for ( i=0; i < NODE_ADDRESS_SIZE; i++ )
- nic->enetaddr[i] = (CONFIG_E1000_FALLBACK_MAC >> (8*(5-i))) & 0xff;
+ if ( *(u32*)(nic->enetaddr) == 0 || *(u32*)(nic->enetaddr) == ~0 ) {
+ unsigned char fb_mac[NODE_ADDRESS_SIZE] = CONFIG_E1000_FALLBACK_MAC;
+
+ memcpy (nic->enetaddr, fb_mac, NODE_ADDRESS_SIZE);
+ }
#endif
#else
/*
@@ -531,10 +533,9 @@
DEBUGFUNC();
s = getenv ("ethaddr");
- if (s == NULL){
+ if (s == NULL) {
return -E1000_ERR_EEPROM;
- }
- else{
+ } else {
for(ii = 0; ii < 6; ii++) {
nic->enetaddr[ii] = s ? simple_strtoul (s, &e, 16) : 0;
if (s){
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index c9e797e..de6fbab 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -25,18 +25,18 @@
LIB := $(obj)libserial.a
-COBJS-y += atmel_usart.o
-COBJS-y += mcfuart.o
+COBJS-$(CONFIG_ATMEL_USART) += atmel_usart.o
+COBJS-$(CONFIG_MCFUART) += mcfuart.o
COBJS-y += ns9750_serial.o
COBJS-y += ns16550.o
-COBJS-y += s3c4510b_uart.o
+COBJS-$(CONFIG_DRIVER_S3C4510_UART) += s3c4510b_uart.o
COBJS-y += serial.o
-COBJS-y += serial_max3100.o
+COBJS-$(CONFIG_MAX3100_SERIAL) += serial_max3100.o
COBJS-y += serial_pl010.o
COBJS-y += serial_pl011.o
-COBJS-y += serial_xuartlite.o
+COBJS-$(CONFIG_XILINX_UARTLITE) += serial_xuartlite.o
COBJS-y += serial_sh.o
-COBJS-y += usbtty.o
+COBJS-$(CONFIG_USB_TTY) += usbtty.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/serial/atmel_usart.c b/drivers/serial/atmel_usart.c
index f35b997..f3b146c 100644
--- a/drivers/serial/atmel_usart.c
+++ b/drivers/serial/atmel_usart.c
@@ -17,7 +17,6 @@
*/
#include <common.h>
-#ifdef CONFIG_ATMEL_USART
#include <asm/io.h>
#include <asm/arch/clk.h>
#include <asm/arch/memory-map.h>
@@ -96,5 +95,3 @@
{
return (usart3_readl(CSR) & USART3_BIT(RXRDY)) != 0;
}
-
-#endif /* CONFIG_ATMEL_USART */
diff --git a/drivers/serial/mcfuart.c b/drivers/serial/mcfuart.c
index 5eb4f45..a1fcd05 100644
--- a/drivers/serial/mcfuart.c
+++ b/drivers/serial/mcfuart.c
@@ -29,8 +29,6 @@
#include <common.h>
-#ifdef CONFIG_MCFUART
-
#include <asm/immap.h>
#include <asm/uart.h>
@@ -130,4 +128,3 @@
uart->ucr = UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED;
}
-#endif /* CONFIG_MCFUART */
diff --git a/drivers/serial/s3c4510b_uart.c b/drivers/serial/s3c4510b_uart.c
index ddcd591..aa378e1 100644
--- a/drivers/serial/s3c4510b_uart.c
+++ b/drivers/serial/s3c4510b_uart.c
@@ -45,8 +45,6 @@
#include <common.h>
-#ifdef CONFIG_DRIVER_S3C4510_UART
-
#include <asm/hardware.h>
#include "s3c4510b_uart.h"
@@ -212,5 +210,3 @@
uart->m_ctrl.bf.sendBreak = 0;
}
-
-#endif
diff --git a/drivers/serial/serial_max3100.c b/drivers/serial/serial_max3100.c
index 0611fc1..4abc271 100644
--- a/drivers/serial/serial_max3100.c
+++ b/drivers/serial/serial_max3100.c
@@ -26,8 +26,6 @@
#include <common.h>
#include <watchdog.h>
-#ifdef CONFIG_MAX3100_SERIAL
-
DECLARE_GLOBAL_DATA_PTR;
/**************************************************************/
@@ -298,5 +296,3 @@
void serial_setbrg(void)
{
}
-
-#endif
diff --git a/drivers/serial/serial_xuartlite.c b/drivers/serial/serial_xuartlite.c
index 61e6887..ef6371e 100644
--- a/drivers/serial/serial_xuartlite.c
+++ b/drivers/serial/serial_xuartlite.c
@@ -27,8 +27,6 @@
#include <config.h>
#include <asm/io.h>
-#ifdef CONFIG_XILINX_UARTLITE
-
#define RX_FIFO_OFFSET 0 /* receive FIFO, read only */
#define TX_FIFO_OFFSET 4 /* transmit FIFO, write only */
#define STATUS_REG_OFFSET 8 /* status register, read only */
@@ -56,8 +54,13 @@
{
if (c == '\n')
serial_putc('\r');
+<<<<<<< .merge_file_kaofiJ
while (in_be32((void *)UARTLITE_STATUS) & SR_TX_FIFO_FULL);
out_be32((void *)UARTLITE_TX_FIFO, (unsigned char) (c & 0xff));
+=======
+ while (in_be32((u32 *) UARTLITE_STATUS) & SR_TX_FIFO_FULL);
+ out_be32((u32 *) UARTLITE_TX_FIFO, (unsigned char) (c & 0xff));
+>>>>>>> .merge_file_zSz9BG
}
void serial_puts(const char * s)
@@ -69,13 +72,20 @@
int serial_getc(void)
{
+<<<<<<< .merge_file_kaofiJ
while (!(in_be32((void *)UARTLITE_STATUS) & SR_RX_FIFO_VALID_DATA));
return in_be32((void *)UARTLITE_RX_FIFO) & 0xff;
+=======
+ while (!(in_be32((u32 *) UARTLITE_STATUS) & SR_RX_FIFO_VALID_DATA));
+ return in_be32((u32 *) UARTLITE_RX_FIFO) & 0xff;
+>>>>>>> .merge_file_zSz9BG
}
int serial_tstc(void)
{
+<<<<<<< .merge_file_kaofiJ
return (in_be32((void *)UARTLITE_STATUS) & SR_RX_FIFO_VALID_DATA);
+=======
+ return (in_be32((u32 *) UARTLITE_STATUS) & SR_RX_FIFO_VALID_DATA);
+>>>>>>> .merge_file_zSz9BG
}
-
-#endif /* CONFIG_MICROBLZE */
diff --git a/drivers/serial/usbtty.c b/drivers/serial/usbtty.c
index 2bc5c3c..e738c56 100644
--- a/drivers/serial/usbtty.c
+++ b/drivers/serial/usbtty.c
@@ -23,8 +23,6 @@
#include <common.h>
-#ifdef CONFIG_USB_TTY
-
#include <circbuf.h>
#include <devices.h>
#include "usbtty.h"
@@ -1007,6 +1005,3 @@
udc_irq();
}
-
-
-#endif
diff --git a/drivers/usb/usbdcore.c b/drivers/usb/usbdcore.c
index 808da9f..53ed669 100644
--- a/drivers/usb/usbdcore.c
+++ b/drivers/usb/usbdcore.c
@@ -552,7 +552,7 @@
struct urb *urb;
if (!(urb = (struct urb *) malloc (sizeof (struct urb)))) {
- usberr (" F A T A L: malloc(%u) FAILED!!!!",
+ usberr (" F A T A L: malloc(%zu) FAILED!!!!",
sizeof (struct urb));
return NULL;
}
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 27df449..b332a82 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -100,7 +100,11 @@
value << ATMEL_LCDC_CLKVAL_OFFSET);
/* Initialize control register 2 */
+#ifdef CONFIG_AVR32
+ value = ATMEL_LCDC_MEMOR_BIG | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE;
+#else
value = ATMEL_LCDC_MEMOR_LITTLE | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE;
+#endif
if (panel_info.vl_tft)
value |= ATMEL_LCDC_DISTYPE_TFT;
diff --git a/include/api_public.h b/include/api_public.h
index 9bc0501..5b0c09e 100644
--- a/include/api_public.h
+++ b/include/api_public.h
@@ -126,6 +126,7 @@
#define DT_STOR_SCSI 0x0020
#define DT_STOR_USB 0x0040
#define DT_STOR_MMC 0x0080
+#define DT_STOR_SATA 0x0100
#define DEV_STA_CLOSED 0x0000 /* invalid, closed */
#define DEV_STA_OPEN 0x0001 /* open i.e. active */
diff --git a/include/asm-arm/arch-at91rm9200/AT91RM9200.h b/include/asm-arm/arch-at91rm9200/AT91RM9200.h
index 2f7f710..95db017 100644
--- a/include/asm-arm/arch-at91rm9200/AT91RM9200.h
+++ b/include/asm-arm/arch-at91rm9200/AT91RM9200.h
@@ -25,6 +25,7 @@
#ifndef AT91RM9200_H
#define AT91RM9200_H
+#ifndef __ASSEMBLY__
typedef volatile unsigned int AT91_REG; /* Hardware register definition */
/*****************************************************************************/
@@ -780,4 +781,5 @@
#define AT91C_PIOB_ODR ((AT91_REG *) 0xFFFFF614) /* (PIOB) Output Disable Registerr */
#define AT91C_PIOB_PDSR ((AT91_REG *) 0xFFFFF63C) /* (PIOB) Pin Data Status Register */
-#endif
+#endif /* __ASSEMBLY__ */
+#endif /* AT91RM9200_H */
diff --git a/include/asm-avr32/io.h b/include/asm-avr32/io.h
index d030c26..06e52b1 100644
--- a/include/asm-avr32/io.h
+++ b/include/asm-avr32/io.h
@@ -22,6 +22,8 @@
#ifndef __ASM_AVR32_IO_H
#define __ASM_AVR32_IO_H
+#include <asm/types.h>
+
#ifdef __KERNEL__
/*
diff --git a/include/asm-avr32/sysreg.h b/include/asm-avr32/sysreg.h
index 72ad49e..4f69704 100644
--- a/include/asm-avr32/sysreg.h
+++ b/include/asm-avr32/sysreg.h
@@ -273,7 +273,9 @@
| SYSREG_BF(name,value))
/* Register access macros */
-#define sysreg_read(reg) __builtin_mfsr(SYSREG_##reg)
-#define sysreg_write(reg, value) __builtin_mtsr(SYSREG_##reg, value)
+#define sysreg_read(reg) \
+ ((unsigned long)__builtin_mfsr(SYSREG_##reg))
+#define sysreg_write(reg, value) \
+ __builtin_mtsr(SYSREG_##reg, value)
#endif /* __ASM_AVR32_SYSREG_H__ */
diff --git a/include/asm-nios2/types.h b/include/asm-nios2/types.h
index f13d8bd..ea859c0 100644
--- a/include/asm-nios2/types.h
+++ b/include/asm-nios2/types.h
@@ -52,6 +52,9 @@
/* Dma addresses are 32-bits wide. */
typedef u32 dma_addr_t;
+
+typedef unsigned long phys_addr_t;
+typedef unsigned long phys_size_t;
#endif /* __KERNEL__ */
#endif /* __ASM_NIOS2_TYPES_H */
diff --git a/include/asm-ppc/fsl_lbc.h b/include/asm-ppc/fsl_lbc.h
index c4af797..ea49ddc 100644
--- a/include/asm-ppc/fsl_lbc.h
+++ b/include/asm-ppc/fsl_lbc.h
@@ -298,4 +298,13 @@
#define LCRR_CLKDIV_4 0x00000004
#define LCRR_CLKDIV_8 0x00000008
+/* LTEDR - Transfer Error Check Disable Register
+ */
+#define LTEDR_BMD 0x80000000 /* Bus monitor disable */
+#define LTEDR_PARD 0x20000000 /* Parity error checking disabled */
+#define LTEDR_WPD 0x04000000 /* Write protect error checking diable */
+#define LTEDR_WARA 0x00800000 /* Write-after-read-atomic error checking diable */
+#define LTEDR_RAWA 0x00400000 /* Read-after-write-atomic error checking disable */
+#define LTEDR_CSD 0x00080000 /* Chip select error checking disable */
+
#endif /* __ASM_PPC_FSL_LBC_H */
diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h
index c5ac658..be2ce24 100644
--- a/include/asm-ppc/global_data.h
+++ b/include/asm-ppc/global_data.h
@@ -51,6 +51,9 @@
unsigned long cpm_clk;
unsigned long scc_clk;
unsigned long brg_clk;
+#ifdef CONFIG_PCI
+ unsigned long pci_clk;
+#endif
#endif
unsigned long mem_clk;
#if defined(CONFIG_MPC83XX)
diff --git a/include/command.h b/include/command.h
index c3ef51d..4a27e97 100644
--- a/include/command.h
+++ b/include/command.h
@@ -27,6 +27,8 @@
#ifndef __COMMAND_H
#define __COMMAND_H
+#include <config.h>
+
#ifndef NULL
#define NULL 0
#endif
diff --git a/include/configs/ADS860.h b/include/configs/ADS860.h
index 2ee8c61..f677b9c 100644
--- a/include/configs/ADS860.h
+++ b/include/configs/ADS860.h
@@ -51,7 +51,7 @@
/* This is picked up again in fads.h */
#define FADS_COMMANDS_ALREADY_DEFINED
-#include "fads.h"
+#include "../../board/fads/fads.h"
#define CFG_PC_IDE_RESET ((ushort)0x0008) /* PC 12 */
diff --git a/include/configs/APC405.h b/include/configs/APC405.h
index 02f0c76..2f266a2 100644
--- a/include/configs/APC405.h
+++ b/include/configs/APC405.h
@@ -193,7 +193,8 @@
/* If a long serial cable is connected but */
/* other end is dead, garbage will be read */
#define CONFIG_AUTOBOOT_KEYED 1
-#define CONFIG_AUTOBOOT_PROMPT "Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Press SPACE to abort autoboot in %d seconds\n", bootdelay
#undef CONFIG_AUTOBOOT_DELAY_STR
#define CONFIG_AUTOBOOT_STOP_STR " "
diff --git a/include/configs/Adder.h b/include/configs/Adder.h
index 7389c38..cefdd29 100644
--- a/include/configs/Adder.h
+++ b/include/configs/Adder.h
@@ -131,7 +131,7 @@
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
#define CFG_MONITOR_BASE TEXT_BASE
-#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 KB for Monitor */
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 KB for Monitor */
#ifdef CONFIG_BZIP2
#define CFG_MALLOC_LEN (2500 << 10) /* Reserve ~2.5 MB for malloc() */
#else
diff --git a/include/configs/AmigaOneG3SE.h b/include/configs/AmigaOneG3SE.h
index a992498..84efd2f 100644
--- a/include/configs/AmigaOneG3SE.h
+++ b/include/configs/AmigaOneG3SE.h
@@ -371,7 +371,8 @@
#define CONFIG_BOOTDELAY 5 /* Boot automatically after five seconds */
#define CONFIG_PREBOOT ""
#define CONFIG_BOOTCOMMAND "fdcboot; diskboot"
-#define CONFIG_MENUPROMPT "Press any key to interrupt autoboot: %2d "
+#define CONFIG_MENUPROMPT \
+ "Press any key to interrupt autoboot: %2d ", bootdelay
#define CONFIG_MENUKEY ' '
#define CONFIG_MENUCOMMAND "menu"
/* #define CONFIG_AUTOBOOT_KEYED */
diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h
index 6b585be..c173539 100644
--- a/include/configs/CPCI405DT.h
+++ b/include/configs/CPCI405DT.h
@@ -152,8 +152,9 @@
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
/* Only interrupt boot if special string is typed */
-#define CONFIG_AUTOBOOT_KEYED 1
-#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds\n"
+#define CONFIG_AUTOBOOT_KEYED 1
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Autobooting in %d seconds\n", bootdelay
#undef CONFIG_AUTOBOOT_DELAY_STR
#undef CONFIG_AUTOBOOT_STOP_STR /* defined via environment var */
#define CONFIG_AUTOBOOT_STOP_STR2 "esdesd" /* esd special for esd access*/
diff --git a/include/configs/DU440.h b/include/configs/DU440.h
index 0f5f85c..64c9ac0 100644
--- a/include/configs/DU440.h
+++ b/include/configs/DU440.h
@@ -345,8 +345,9 @@
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
-#define CONFIG_AUTOBOOT_KEYED 1
-#define CONFIG_AUTOBOOT_PROMPT "Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_KEYED 1
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Press SPACE to abort autoboot in %d seconds\n", bootdelay
#define CONFIG_AUTOBOOT_DELAY_STR "d"
#define CONFIG_AUTOBOOT_STOP_STR " "
diff --git a/include/configs/FADS860T.h b/include/configs/FADS860T.h
index 18de6b0..38295c4 100644
--- a/include/configs/FADS860T.h
+++ b/include/configs/FADS860T.h
@@ -38,7 +38,7 @@
#define CONFIG_DRAM_50MHZ 1
#define CONFIG_SDRAM_50MHZ 1
-#include "fads.h"
+#include "../../board/fads/fads.h"
#ifdef USE_REAL_FLASH_VALUES
/*
diff --git a/include/configs/GTH.h b/include/configs/GTH.h
index 00e09f7..461670a 100644
--- a/include/configs/GTH.h
+++ b/include/configs/GTH.h
@@ -62,8 +62,9 @@
/* Only interrupt boot if space is pressed */
/* If a long serial cable is connected but */
/* other end is dead, garbage will be read */
-#define CONFIG_AUTOBOOT_KEYED 1
-#define CONFIG_AUTOBOOT_PROMPT "Press space to abort autoboot in %d second\n"
+#define CONFIG_AUTOBOOT_KEYED 1
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Press space to abort autoboot in %d second\n", bootdelay
#define CONFIG_AUTOBOOT_DELAY_STR "d"
#define CONFIG_AUTOBOOT_STOP_STR " "
diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h
index f6c31ea..e52fbfd 100644
--- a/include/configs/KUP4K.h
+++ b/include/configs/KUP4K.h
@@ -488,7 +488,8 @@
#define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */
#if 0
-#define CONFIG_AUTOBOOT_PROMPT "Boote in %d Sekunden - stop mit \"2\"\n"
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Boote in %d Sekunden - stop mit \"2\"\n", bootdelay
#endif
#define CONFIG_AUTOBOOT_STOP_STR "." /* easy to stop for now */
#define CONFIG_SILENT_CONSOLE 1
diff --git a/include/configs/KUP4X.h b/include/configs/KUP4X.h
index e558aa4..be0c7af 100644
--- a/include/configs/KUP4X.h
+++ b/include/configs/KUP4X.h
@@ -454,7 +454,8 @@
#define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */
#if 0
-#define CONFIG_AUTOBOOT_PROMPT "Boote in %d Sekunden - stop mit \"2\"\n"
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Boote in %d Sekunden - stop mit \"2\"\n", bootdelay
#endif
#define CONFIG_AUTOBOOT_STOP_STR "." /* easy to stop for now */
#define CONFIG_SILENT_CONSOLE 1
diff --git a/include/configs/MPC86xADS.h b/include/configs/MPC86xADS.h
index e0e8554..233a8d1 100644
--- a/include/configs/MPC86xADS.h
+++ b/include/configs/MPC86xADS.h
@@ -41,7 +41,7 @@
#define CONFIG_DRAM_50MHZ 1
#define CONFIG_SDRAM_50MHZ 1
-#include "fads.h"
+#include "../../board/fads/fads.h"
#define CFG_OR5_PRELIM 0xFFFF8110 /* 64Kbyte address space */
#define CFG_BR5_PRELIM (CFG_PHYDEV_ADDR | BR_PS_8 | BR_V)
diff --git a/include/configs/MPC885ADS.h b/include/configs/MPC885ADS.h
index 1867c5b..f4d1842 100644
--- a/include/configs/MPC885ADS.h
+++ b/include/configs/MPC885ADS.h
@@ -27,7 +27,7 @@
#define CONFIG_SDRAM_50MHZ 1
-#include "fads.h"
+#include "../../board/fads/fads.h"
#define CFG_OR5_PRELIM 0xFFFF8110 /* 64Kbyte address space */
#define CFG_BR5_PRELIM (CFG_PHYDEV_ADDR | BR_PS_8 | BR_V)
diff --git a/include/configs/MVBC_P.h b/include/configs/MVBC_P.h
index 04580b7..8c8a445 100644
--- a/include/configs/MVBC_P.h
+++ b/include/configs/MVBC_P.h
@@ -40,7 +40,7 @@
#define CONFIG_MISC_INIT_R 1
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#ifdef (CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5
#endif
@@ -255,7 +255,7 @@
#define CONFIG_NET_RETRY_COUNT 5
#define CONFIG_E1000
-#define CONFIG_E1000_FALLBACK_MAC 0xb6b445ebfbc0
+#define CONFIG_E1000_FALLBACK_MAC { 0xb6, 0xb4, 0x45, 0xeb, 0xfb, 0xc0 }
#undef CONFIG_MPC5xxx_FEC
#undef CONFIG_PHY_ADDR
#define CONFIG_NETDEV eth0
@@ -268,7 +268,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#undef CFG_LONGHELP
#define CFG_PROMPT "=> "
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#ifdef (CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024
#else
#define CFG_CBSIZE 256
diff --git a/include/configs/MVBLUE.h b/include/configs/MVBLUE.h
index d08d795..8e247af 100644
--- a/include/configs/MVBLUE.h
+++ b/include/configs/MVBLUE.h
@@ -59,17 +59,18 @@
#define CONFIG_CLOCKS_IN_MHZ 1
-#define CONFIG_BOARD_TYPES 1
+#define CONFIG_BOARD_TYPES 1
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOT_RETRY_TIME -1
#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds (stop with 's')...\n"
+#define CONFIG_AUTOBOOT_PROMPT \
+ "autoboot in %d seconds (stop with 's')...\n", bootdelay
#define CONFIG_AUTOBOOT_STOP_STR "s"
#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_RESET_TO_RETRY 60
diff --git a/include/configs/NC650.h b/include/configs/NC650.h
index 0b09482..84c6e9b 100644
--- a/include/configs/NC650.h
+++ b/include/configs/NC650.h
@@ -65,9 +65,10 @@
#define CFG_MEASURE_CPUCLK
#define CFG_8XX_XIN CONFIG_8xx_OSCLK
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d seconds...\n"
+#define CONFIG_AUTOBOOT_PROMPT \
+ "\nEnter password - autoboot in %d seconds...\n", bootdelay
#define CONFIG_AUTOBOOT_DELAY_STR "ids"
#define CONFIG_BOOT_RETRY_TIME 900
#define CONFIG_BOOT_RETRY_MIN 30
diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h
index 0bd77c0..a3d1c56 100644
--- a/include/configs/PLU405.h
+++ b/include/configs/PLU405.h
@@ -154,8 +154,9 @@
/* Only interrupt boot if space is pressed */
/* If a long serial cable is connected but */
/* other end is dead, garbage will be read */
-#define CONFIG_AUTOBOOT_KEYED 1
-#define CONFIG_AUTOBOOT_PROMPT "Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_KEYED 1
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Press SPACE to abort autoboot in %d seconds\n", bootdelay
#undef CONFIG_AUTOBOOT_DELAY_STR
#define CONFIG_AUTOBOOT_STOP_STR " "
diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h
index e8b405a..42f1d8d 100644
--- a/include/configs/PMC440.h
+++ b/include/configs/PMC440.h
@@ -409,7 +409,8 @@
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
#define CONFIG_AUTOBOOT_KEYED 1
-#define CONFIG_AUTOBOOT_PROMPT "Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Press SPACE to abort autoboot in %d seconds\n", bootdelay
#undef CONFIG_AUTOBOOT_DELAY_STR
#define CONFIG_AUTOBOOT_STOP_STR " "
diff --git a/include/configs/RPXlite_DW.h b/include/configs/RPXlite_DW.h
index 872765c..faae407 100644
--- a/include/configs/RPXlite_DW.h
+++ b/include/configs/RPXlite_DW.h
@@ -68,7 +68,8 @@
#ifdef DEPLOYMENT
#define CONFIG_BOOT_RETRY_TIME -1
#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds (stop with 'st')...\n"
+#define CONFIG_AUTOBOOT_PROMPT \
+ "autoboot in %d seconds (stop with 'st')...\n", bootdelay
#define CONFIG_AUTOBOOT_STOP_STR "st"
#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_RESET_TO_RETRY 1
diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h
index 3aee45c..aefc7ee 100644
--- a/include/configs/SXNI855T.h
+++ b/include/configs/SXNI855T.h
@@ -465,7 +465,7 @@
#if 1
#define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */
-#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n", bootdelay
#define CONFIG_AUTOBOOT_DELAY_STR "delayabit"
#define CONFIG_AUTOBOOT_STOP_STR " " /* easy to stop for now */
#endif
diff --git a/include/configs/adsvix.h b/include/configs/adsvix.h
deleted file mode 100644
index 427b548..0000000
--- a/include/configs/adsvix.h
+++ /dev/null
@@ -1,365 +0,0 @@
-/*
- * (C) Copyright 2004
- * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net
- *
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * Configuation settings for the LUBBOCK board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_PXA27X 1 /* This is an PXA27x CPU */
-#define CONFIG_ADSVIX 1 /* on a Adsvix Board */
-#define CONFIG_MMC 1
-#define BOARD_LATE_INIT 1
-
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-
-#define RTC
-
-/*
- * Size of malloc() pool
- */
-#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
-
-/*
- * Hardware drivers
- */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_FFUART 1 /* we use FFUART on ADSVIX */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 38400
-
-#define CONFIG_DOS_PARTITION 1
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_PCMCIA
-
-#undef CONFIG_CMD_NET
-
-
-#undef CONFIG_SHOW_BOOT_PROGRESS
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_SERVERIP 192.168.1.99
-#define CONFIG_BOOTCOMMAND "run boot_flash"
-#define CONFIG_BOOTARGS "console=ttyS0,38400 ramdisk_size=12288"\
- " rw root=/dev/ram initrd=0xa0800000,5m"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "program_boot_cf=" \
- "mw.b 0xa0010000 0xff 0x20000; " \
- "if pinit on && " \
- "ide reset && " \
- "fatload ide 0 0xa0010000 u-boot.bin; " \
- "then " \
- "protect off 0x0 0x1ffff; " \
- "erase 0x0 0x1ffff; " \
- "cp.b 0xa0010000 0x0 0x20000; " \
- "fi\0" \
- "program_uzImage_cf=" \
- "mw.b 0xa0010000 0xff 0x180000; " \
- "if pinit on && " \
- "ide reset && " \
- "fatload ide 0 0xa0010000 uzImage; " \
- "then " \
- "protect off 0x40000 0x1bffff; " \
- "erase 0x40000 0x1bffff; " \
- "cp.b 0xa0010000 0x40000 0x180000; " \
- "fi\0" \
- "program_ramdisk_cf=" \
- "mw.b 0xa0010000 0xff 0x500000; " \
- "if pinit on && " \
- "ide reset && " \
- "fatload ide 0 0xa0010000 ramdisk.gz; " \
- "then " \
- "protect off 0x1c0000 0x6bffff; " \
- "erase 0x1c0000 0x6bffff; " \
- "cp.b 0xa0010000 0x1c0000 0x500000; " \
- "fi\0" \
- "boot_cf=" \
- "if pinit on && " \
- "ide reset && " \
- "fatload ide 0 0xa0030000 uzImage && " \
- "fatload ide 0 0xa0800000 ramdisk.gz; " \
- "then " \
- "bootm 0xa0030000; " \
- "fi\0" \
- "program_boot_mmc=" \
- "mw.b 0xa0010000 0xff 0x20000; " \
- "if mmcinit && " \
- "fatload mmc 0 0xa0010000 u-boot.bin; " \
- "then " \
- "protect off 0x0 0x1ffff; " \
- "erase 0x0 0x1ffff; " \
- "cp.b 0xa0010000 0x0 0x20000; " \
- "fi\0" \
- "program_uzImage_mmc=" \
- "mw.b 0xa0010000 0xff 0x180000; " \
- "if mmcinit && " \
- "fatload mmc 0 0xa0010000 uzImage; " \
- "then " \
- "protect off 0x40000 0x1bffff; " \
- "erase 0x40000 0x1bffff; " \
- "cp.b 0xa0010000 0x40000 0x180000; " \
- "fi\0" \
- "program_ramdisk_mmc=" \
- "mw.b 0xa0010000 0xff 0x500000; " \
- "if mmcinit && " \
- "fatload mmc 0 0xa0010000 ramdisk.gz; " \
- "then " \
- "protect off 0x1c0000 0x6bffff; " \
- "erase 0x1c0000 0x6bffff; " \
- "cp.b 0xa0010000 0x1c0000 0x500000; " \
- "fi\0" \
- "boot_mmc=" \
- "if mmcinit && " \
- "fatload mmc 0 0xa0030000 uzImage && " \
- "fatload mmc 0 0xa0800000 ramdisk.gz; " \
- "then " \
- "bootm 0xa0030000; " \
- "fi\0" \
- "boot_flash=" \
- "cp.b 0x1c0000 0xa0800000 0x500000; " \
- "bootm 0x40000\0" \
-
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-/* #define CONFIG_INITRD_TAG 1 */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CFG_HUSH_PARSER 1
-#define CFG_PROMPT_HUSH_PS2 "> "
-
-#define CFG_LONGHELP /* undef to save memory */
-#ifdef CFG_HUSH_PARSER
-#define CFG_PROMPT "$ " /* Monitor Command Prompt */
-#else
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#endif
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_DEVICE_NULLDEV 1
-
-#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */
-#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
-
-#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
-#define CFG_LOAD_ADDR 0xa1000000 /* default load address */
-
-#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */
-#define CFG_CPUSPEED 0x207 /* need to look more closely, I think this is Turbo = 2x, L=91Mhz */
-
- /* valid baudrates */
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-#define CFG_MMC_BASE 0xF0000000
-
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */
-#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */
-#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */
-#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */
-#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */
-#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */
-#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-
-#define CFG_DRAM_BASE 0xa0000000
-#define CFG_DRAM_SIZE 0x04000000
-
-#define CFG_FLASH_BASE PHYS_FLASH_1
-
-/*
- * GPIO settings
- */
-
-#define CFG_GPSR0_VAL 0x00018004
-#define CFG_GPSR1_VAL 0x004F0080
-#define CFG_GPSR2_VAL 0x13EFC000
-#define CFG_GPSR3_VAL 0x0006E032
-#define CFG_GPCR0_VAL 0x084AFE1A
-#define CFG_GPCR1_VAL 0x003003F2
-#define CFG_GPCR2_VAL 0x0C014000
-#define CFG_GPCR3_VAL 0x00000C00
-#define CFG_GPDR0_VAL 0xCBC3BFFC
-#define CFG_GPDR1_VAL 0x00FFABF3
-#define CFG_GPDR2_VAL 0x1EEFFC00
-#define CFG_GPDR3_VAL 0x0187EC32
-#define CFG_GAFR0_L_VAL 0x84400000
-#define CFG_GAFR0_U_VAL 0xA51A8010
-#define CFG_GAFR1_L_VAL 0x699A955A
-#define CFG_GAFR1_U_VAL 0x0005A0AA
-#define CFG_GAFR2_L_VAL 0x40000000
-#define CFG_GAFR2_U_VAL 0x0109A400
-#define CFG_GAFR3_L_VAL 0x54000000
-#define CFG_GAFR3_U_VAL 0x00001409
-
-#define CFG_PSSR_VAL 0x20
-
-/*
- * Clock settings
- */
-#define CFG_CKEN 0x00400200
-#define CFG_CCCR 0x02000290 /* 520Mhz */
-/* #define CFG_CCCR 0x02000210 416 Mhz */
-
-/*
- * Memory settings
- */
-
-#define CFG_MSC0_VAL 0x23F2B3DB
-#define CFG_MSC1_VAL 0x0000CCD1
-#define CFG_MSC2_VAL 0x0000B884
-#define CFG_MDCNFG_VAL 0x08000AC8
-#define CFG_MDREFR_VAL 0x0000001E
-#define CFG_MDMRS_VAL 0x00000000
-
-#define CFG_FLYCNFG_VAL 0x00010001
-#define CFG_SXCNFG_VAL 0x40044004
-
-/*
- * PCMCIA and CF Interfaces
- */
-#define CFG_MECR_VAL 0x00000002
-#define CFG_MCMEM0_VAL 0x00004204
-#define CFG_MCMEM1_VAL 0x00000000
-#define CFG_MCATT0_VAL 0x00010504
-#define CFG_MCATT1_VAL 0x00000000
-#define CFG_MCIO0_VAL 0x00008407
-#define CFG_MCIO1_VAL 0x00000000
-
-#define CONFIG_PXA_PCMCIA 1
-#define CONFIG_PXA_IDE 1
-
-#define CONFIG_PCMCIA_SLOT_A 1
-/* just to keep build system happy */
-
-#define CFG_PCMCIA_MEM_ADDR 0x28000000
-#define CFG_PCMCIA_MEM_SIZE 0x04000000
-
-
-#define CFG_IDE_MAXBUS 1
-/* max. 1 IDE bus */
-#define CFG_IDE_MAXDEVICE 1
-/* max. 1 drive per IDE bus */
-
-#define CFG_ATA_IDE0_OFFSET 0x0000
-
-#define CFG_ATA_BASE_ADDR 0x20000000
-
-/* Offset for data I/O */
-#define CFG_ATA_DATA_OFFSET 0x1f0
-
-/* Offset for normal register accesses */
-#define CFG_ATA_REG_OFFSET 0x1f0
-
-/* Offset for alternate registers */
-#define CFG_ATA_ALT_OFFSET 0x3f0
-
-/*
- * FLASH and environment organization
- */
-
-#define CFG_FLASH_CFI
-#define CFG_FLASH_CFI_DRIVER 1
-
-#define CFG_MONITOR_BASE 0
-#define CFG_MONITOR_LEN 0x20000
-
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 4 + 255 /* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */
-
-/* write flash less slowly */
-#define CFG_FLASH_USE_BUFFER_WRITE 1
-
-/* Flash environment locations */
-#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_ADDR (PHYS_FLASH_1 + CFG_MONITOR_LEN) /* Addr of Environment Sector */
-#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment */
-#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/apollon.h b/include/configs/apollon.h
index 8973296..5884611 100644
--- a/include/configs/apollon.h
+++ b/include/configs/apollon.h
@@ -103,14 +103,6 @@
*/
#define CONFIG_SERIAL1 1 /* UART1 on H4 */
- /*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C
-#define CFG_I2C_SPEED 100000
-#define CFG_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP24XX_I2C
-
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h
index 951ce16..cd2eae2 100644
--- a/include/configs/at91rm9200dk.h
+++ b/include/configs/at91rm9200dk.h
@@ -112,16 +112,11 @@
*/
#include <config_cmd_default.h>
-#define CONFIG_CMD_MII
#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_AUTOSCRIPT
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_MISC
-#undef CONFIG_CMD_LOADS
-
+#define CFG_NAND_LEGACY
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define SECTORSIZE 512
@@ -137,6 +132,7 @@
#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */
#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */
+#include <asm/arch/AT91RM9200.h> /* needed for port definitions */
#define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0)
#define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0)
diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h
index 84d235e..f040b86 100644
--- a/include/configs/atngw100.h
+++ b/include/configs/atngw100.h
@@ -82,8 +82,8 @@
#define CONFIG_BOOTDELAY 1
#define CONFIG_AUTOBOOT 1
#define CONFIG_AUTOBOOT_KEYED 1
-#define CONFIG_AUTOBOOT_PROMPT \
- "Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Press SPACE to abort autoboot in %d seconds\n", bootdelay
#define CONFIG_AUTOBOOT_DELAY_STR "d"
#define CONFIG_AUTOBOOT_STOP_STR " "
diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index 90910bb..68f0cec 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -110,8 +110,8 @@
#define CONFIG_BOOTDELAY 1
#define CONFIG_AUTOBOOT 1
#define CONFIG_AUTOBOOT_KEYED 1
-#define CONFIG_AUTOBOOT_PROMPT \
- "Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Press SPACE to abort autoboot in %d seconds\n", bootdelay
#define CONFIG_AUTOBOOT_DELAY_STR "d"
#define CONFIG_AUTOBOOT_STOP_STR " "
diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h
index 03472a8..d3a2f69 100644
--- a/include/configs/atstk1003.h
+++ b/include/configs/atstk1003.h
@@ -110,8 +110,8 @@
#define CONFIG_BOOTDELAY 1
#define CONFIG_AUTOBOOT 1
#define CONFIG_AUTOBOOT_KEYED 1
-#define CONFIG_AUTOBOOT_PROMPT \
- "Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Press SPACE to abort autoboot in %d seconds\n", bootdelay
#define CONFIG_AUTOBOOT_DELAY_STR "d"
#define CONFIG_AUTOBOOT_STOP_STR " "
diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h
index 07add82..a37ba92 100644
--- a/include/configs/atstk1004.h
+++ b/include/configs/atstk1004.h
@@ -110,8 +110,8 @@
#define CONFIG_BOOTDELAY 1
#define CONFIG_AUTOBOOT 1
#define CONFIG_AUTOBOOT_KEYED 1
-#define CONFIG_AUTOBOOT_PROMPT \
- "Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Press SPACE to abort autoboot in %d seconds\n", bootdelay
#define CONFIG_AUTOBOOT_DELAY_STR "d"
#define CONFIG_AUTOBOOT_STOP_STR " "
diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h
index f9af675..a6c5b6e 100644
--- a/include/configs/atstk1006.h
+++ b/include/configs/atstk1006.h
@@ -110,8 +110,8 @@
#define CONFIG_BOOTDELAY 1
#define CONFIG_AUTOBOOT 1
#define CONFIG_AUTOBOOT_KEYED 1
-#define CONFIG_AUTOBOOT_PROMPT \
- "Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Press SPACE to abort autoboot in %d seconds\n", bootdelay
#define CONFIG_AUTOBOOT_DELAY_STR "d"
#define CONFIG_AUTOBOOT_STOP_STR " "
diff --git a/include/configs/csb637.h b/include/configs/csb637.h
index e9c6d8e..735a211 100644
--- a/include/configs/csb637.h
+++ b/include/configs/csb637.h
@@ -114,17 +114,11 @@
*/
#include <config_cmd_default.h>
-#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_PING
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_AUTOSCRIPT
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_MISC
-#undef CONFIG_CMD_LOADS
-
+#ifdef NAND_SUPPORT_HAS_BEEN_FIXED /* NAND support is broken / unimplemented */
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define SECTORSIZE 512
@@ -140,6 +134,7 @@
#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */
#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */
+#include <asm/arch/AT91RM9200.h> /* needed for port definitions */
#define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0)
#define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0)
@@ -155,6 +150,8 @@
#define NAND_CTL_CLRCLE(nandptr)
#define NAND_CTL_SETCLE(nandptr)
+#endif /* NAND_SUPPORT_HAS_BEEN_FIXED */
+
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM 0x20000000
#define PHYS_SDRAM_SIZE 0x4000000 /* 64 megs */
diff --git a/include/configs/gth2.h b/include/configs/gth2.h
index c2d6ca7..7f7190b 100644
--- a/include/configs/gth2.h
+++ b/include/configs/gth2.h
@@ -54,8 +54,9 @@
/* Only interrupt boot if space is pressed */
/* If a long serial cable is connected but */
/* other end is dead, garbage will be read */
-#define CONFIG_AUTOBOOT_KEYED 1
-#define CONFIG_AUTOBOOT_PROMPT "Press space to abort autoboot in %d second\n"
+#define CONFIG_AUTOBOOT_KEYED 1
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Press space to abort autoboot in %d second\n", bootdelay
#define CONFIG_AUTOBOOT_DELAY_STR "d"
#define CONFIG_AUTOBOOT_STOP_STR " "
diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h
index 7c2c224..d918782 100644
--- a/include/configs/gw8260.h
+++ b/include/configs/gw8260.h
@@ -279,7 +279,8 @@
* To stop use: " "
*/
#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, press \" \" to stop\n"
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Autobooting in %d seconds, press \" \" to stop\n", bootdelay
#define CONFIG_AUTOBOOT_STOP_STR " "
#undef CONFIG_AUTOBOOT_DELAY_STR
#define DEBUG_BOOTKEYS 0
diff --git a/include/configs/hymod.h b/include/configs/hymod.h
index 01e7970..264192f 100644
--- a/include/configs/hymod.h
+++ b/include/configs/hymod.h
@@ -224,7 +224,7 @@
*/
#define CONFIG_AUTOBOOT_KEYED
#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, " \
- "press <SPACE> to stop\n"
+ "press <SPACE> to stop\n", bootdelay
#define CONFIG_AUTOBOOT_STOP_STR " "
#undef CONFIG_AUTOBOOT_DELAY_STR
#define DEBUG_BOOTKEYS 0
diff --git a/include/configs/linkstation.h b/include/configs/linkstation.h
index d3908b9..bc64294 100644
--- a/include/configs/linkstation.h
+++ b/include/configs/linkstation.h
@@ -82,7 +82,8 @@
#undef CONFIG_BOOT_RETRY_TIME
#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT "Boot in %02d seconds ('s' to stop)..."
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Boot in %02d seconds ('s' to stop)...", bootdelay
#define CONFIG_AUTOBOOT_STOP_STR "s"
#define CONFIG_CMD_IDE
diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h
index 8a82702..87abfba 100644
--- a/include/configs/lwmon.h
+++ b/include/configs/lwmon.h
@@ -252,7 +252,8 @@
#define CONFIG_POST_KEY_MAGIC "3C+3E" /* press F3 + F5 keys to force POST */
#if 0
#define CONFIG_AUTOBOOT_KEYED /* Enable "password" protection */
-#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n"
+#define CONFIG_AUTOBOOT_PROMPT \
+ "\nEnter password - autoboot in %d sec...\n", bootdelay
#define CONFIG_AUTOBOOT_DELAY_STR " " /* "password" */
#endif
/*----------------------------------------------------------------------*/
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index cf406c8..2f3a066 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -277,7 +277,8 @@
#define CONFIG_POST_KEY_MAGIC "3C+3E" /* press F3 + F5 keys to force POST */
#if 0
#define CONFIG_AUTOBOOT_KEYED /* Enable "password" protection */
-#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n"
+#define CONFIG_AUTOBOOT_PROMPT \
+ "\nEnter password - autoboot in %d sec...\n", bootdelay
#define CONFIG_AUTOBOOT_DELAY_STR " " /* "password" */
#endif
diff --git a/include/configs/m501sk.h b/include/configs/m501sk.h
index 095fdaf..e4be1ed 100644
--- a/include/configs/m501sk.h
+++ b/include/configs/m501sk.h
@@ -40,7 +40,6 @@
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
-#undef CONFIG_AUTOBOOT_PROMPT
#define CONFIG_MENUPROMPT "."
/*
@@ -105,7 +104,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"unlock=yes\0"
-#define CFG_CMD_JFFS2
+#define CONFIG_CMD_JFFS2
#undef CONFIG_CMD_EEPROM
#define CONFIG_CMD_NET
#define CONFIG_CMD_RUN
diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h
index b6843af..3d1eafe 100644
--- a/include/configs/motionpro.h
+++ b/include/configs/motionpro.h
@@ -96,7 +96,7 @@
#undef CONFIG_AUTOBOOT_DELAY_STR
#undef CONFIG_BOOTARGS
#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, " \
- "press \"<Esc><Esc>\" to stop\n"
+ "press \"<Esc><Esc>\" to stop\n", bootdelay
#define CONFIG_ETHADDR 00:50:C2:40:10:00
#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h
index 2eb4af1..87264fb 100644
--- a/include/configs/mp2usb.h
+++ b/include/configs/mp2usb.h
@@ -230,7 +230,8 @@
#undef CONFIG_SILENT_CONSOLE /* enable silent startup */
#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT "Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Press SPACE to abort autoboot in %d seconds\n", bootdelay
#define CONFIG_AUTOBOOT_STOP_STR " "
#define CONFIG_AUTOBOOT_DELAY_STR "d"
diff --git a/include/configs/netstar.h b/include/configs/netstar.h
index d4deda4..756b7c2 100644
--- a/include/configs/netstar.h
+++ b/include/configs/netstar.h
@@ -195,7 +195,8 @@
#if 0 /* feel free to disable for development */
#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */
-#define CONFIG_AUTOBOOT_PROMPT "\nNetStar PBX - boot in %d secs...\n"
+#define CONFIG_AUTOBOOT_PROMPT \
+ "\nNetStar PBX - boot in %d secs...\n", bootdelay
#define CONFIG_AUTOBOOT_DELAY_STR "." /* 1st "password" */
#endif
diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h
index 56b4d92..dee6643 100644
--- a/include/configs/ppmc8260.h
+++ b/include/configs/ppmc8260.h
@@ -228,7 +228,8 @@
* To stop use: " "
*/
# define CONFIG_AUTOBOOT_KEYED
-# define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, press \" \" to stop\n"
+# define CONFIG_AUTOBOOT_PROMPT \
+ "Autobooting in %d seconds, press \" \" to stop\n", bootdelay
# define CONFIG_AUTOBOOT_STOP_STR " "
# undef CONFIG_AUTOBOOT_DELAY_STR
# define DEBUG_BOOTKEYS 0
diff --git a/include/configs/quantum.h b/include/configs/quantum.h
index f49e2b0..cc261c3 100644
--- a/include/configs/quantum.h
+++ b/include/configs/quantum.h
@@ -116,7 +116,8 @@
#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */
-#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n"
+#define CONFIG_AUTOBOOT_PROMPT \
+ "\nEnter password - autoboot in %d sec...\n", bootdelay
#define CONFIG_AUTOBOOT_DELAY_STR "system"
/*
* Miscellaneous configurable options
diff --git a/include/configs/rmu.h b/include/configs/rmu.h
index 28fb7c3..596bf15 100644
--- a/include/configs/rmu.h
+++ b/include/configs/rmu.h
@@ -111,7 +111,8 @@
#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */
-#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n"
+#define CONFIG_AUTOBOOT_PROMPT \
+ "\nEnter password - autoboot in %d sec...\n", bootdelay
#define CONFIG_AUTOBOOT_DELAY_STR "system"
/*
diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h
index 2a398e8..8427752 100644
--- a/include/configs/sacsng.h
+++ b/include/configs/sacsng.h
@@ -436,7 +436,7 @@
* To stop use: " "
*/
#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT "Autobooting...\n"
+#define CONFIG_AUTOBOOT_PROMPT "Autobooting...\n"
#define CONFIG_AUTOBOOT_STOP_STR " "
#undef CONFIG_AUTOBOOT_DELAY_STR
#define CONFIG_ZERO_BOOTDELAY_CHECK
diff --git a/include/configs/sbc8260.h b/include/configs/sbc8260.h
index 7993137..b92344c 100644
--- a/include/configs/sbc8260.h
+++ b/include/configs/sbc8260.h
@@ -306,7 +306,8 @@
*/
#undef CONFIG_AUTOBOOT_KEYED
#ifdef CONFIG_AUTOBOOT_KEYED
-# define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, press \" \" to stop\n"
+# define CONFIG_AUTOBOOT_PROMPT \
+ "Autobooting in %d seconds, press \" \" to stop\n", bootdelay
# define CONFIG_AUTOBOOT_STOP_STR " "
# undef CONFIG_AUTOBOOT_DELAY_STR
# define DEBUG_BOOTKEYS 0
diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index f6e40de..87311ea 100644
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -132,7 +132,8 @@
#if 1 /* feel free to disable for development */
#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */
-#define CONFIG_AUTOBOOT_PROMPT "\nSC3 - booting... stop with ENTER\n"
+#define CONFIG_AUTOBOOT_PROMPT \
+ "\nSC3 - booting... stop with ENTER\n"
#define CONFIG_AUTOBOOT_DELAY_STR "\r" /* 1st "password" */
#define CONFIG_AUTOBOOT_DELAY_STR2 "\n" /* 1st "password" */
#endif
diff --git a/include/configs/trab.h b/include/configs/trab.h
index de36fca..b0615a0 100644
--- a/include/configs/trab.h
+++ b/include/configs/trab.h
@@ -289,7 +289,8 @@
#if 1 /* feel free to disable for development */
#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */
-#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n"
+#define CONFIG_AUTOBOOT_PROMPT \
+ "\nEnter password - autoboot in %d sec...\n", bootdelay
#define CONFIG_AUTOBOOT_DELAY_STR "R" /* 1st "password" */
#endif
diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h
index 287a618..1675ab7 100644
--- a/include/configs/utx8245.h
+++ b/include/configs/utx8245.h
@@ -58,7 +58,7 @@
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_BOOTDELAY 2
-#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n", bootdelay
#define CONFIG_BOOTCOMMAND "run nfsboot" /* autoboot command */
#define CONFIG_BOOTARGS "root=/dev/ram console=ttyS0,57600" /* RAMdisk */
#define CONFIG_ETHADDR 00:AA:00:14:00:05 /* UTX5 */
diff --git a/include/ppc4xx.h b/include/ppc4xx.h
index 5a6b855..c71da60 100644
--- a/include/ppc4xx.h
+++ b/include/ppc4xx.h
@@ -47,6 +47,12 @@
#endif
#if defined(CONFIG_440)
+/*
+ * Enable long long (%ll ...) printf format on 440 PPC's since most of
+ * them support 36bit physical addressing
+ */
+#define CFG_64BIT_VSPRINTF
+#define CFG_64BIT_STRTOUL
#include <ppc440.h>
#else
#include <ppc405.h>
diff --git a/lib_arm/board.c b/lib_arm/board.c
index 80b149b..a093860 100644
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -233,6 +233,18 @@
}
#endif
+#ifdef CONFIG_SKIP_RELOCATE_UBOOT
+/*
+ * This routine sets the relocation done flag, because even if
+ * relocation is skipped, the flag is used by other generic code.
+ */
+static int reloc_init(void)
+{
+ gd->flags |= GD_FLG_RELOC;
+ return 0;
+}
+#endif
+
/*
* Breathe some life into the board...
*
@@ -262,6 +274,11 @@
init_fnc_t *init_sequence[] = {
cpu_init, /* basic cpu dependent setup */
+#if defined(CONFIG_SKIP_RELOCATE_UBOOT)
+ reloc_init, /* Set the relocation done flag, must
+ do this AFTER cpu_init(), but as soon
+ as possible */
+#endif
board_init, /* basic board dependent setup */
interrupt_init, /* set up exceptions */
env_init, /* initialize environment */
diff --git a/lib_arm/bootm.c b/lib_arm/bootm.c
index 6b4a807..b838c37 100644
--- a/lib_arm/bootm.c
+++ b/lib_arm/bootm.c
@@ -43,9 +43,6 @@
# endif
static void setup_commandline_tag (bd_t *bd, char *commandline);
-#if 0
-static void setup_ramdisk_tag (bd_t *bd);
-#endif
# ifdef CONFIG_INITRD_TAG
static void setup_initrd_tag (bd_t *bd, ulong initrd_start,
ulong initrd_end);
diff --git a/lib_m68k/time.c b/lib_m68k/time.c
index 28d371d..6eba784 100644
--- a/lib_m68k/time.c
+++ b/lib_m68k/time.c
@@ -199,6 +199,11 @@
return get_timer(0);
}
+unsigned long usec2ticks(unsigned long usec)
+{
+ return get_timer(usec);
+}
+
/*
* This function is derived from PowerPC code (timebase clock frequency).
* On M68K it returns the number of timer ticks per second.
diff --git a/lib_sparc/board.c b/lib_sparc/board.c
index af301c0..205a8ca 100644
--- a/lib_sparc/board.c
+++ b/lib_sparc/board.c
@@ -451,7 +451,7 @@
if ((s = getenv("bootfile")) != NULL) {
copy_filename(BootFile, s, sizeof(BootFile));
}
-#endif /* CFG_CMD_NET */
+#endif /* CONFIG_CMD_NET */
WATCHDOG_RESET();
@@ -483,7 +483,7 @@
WATCHDOG_RESET();
puts("IDE: ");
ide_init();
-#endif /* CFG_CMD_IDE */
+#endif /* CONFIG_CMD_IDE */
#ifdef CONFIG_LAST_STAGE_INIT
WATCHDOG_RESET();
diff --git a/nand_spl/board/amcc/kilauea/Makefile b/nand_spl/board/amcc/kilauea/Makefile
index 0667fc1..cedc8e0 100644
--- a/nand_spl/board/amcc/kilauea/Makefile
+++ b/nand_spl/board/amcc/kilauea/Makefile
@@ -57,7 +57,7 @@
# create symbolic links for common files
# from cpu directory
-$(obj)44x_spd_ddr2.c: ecc.h
+$(obj)44x_spd_ddr2.c: $(obj)ecc.h
@rm -f $(obj)44x_spd_ddr2.c
ln -s $(SRCTREE)/cpu/ppc4xx/44x_spd_ddr2.c $(obj)44x_spd_ddr2.c
diff --git a/onenand_ipl/board/apollon/Makefile b/onenand_ipl/board/apollon/Makefile
index f10ed02..1f996a4 100644
--- a/onenand_ipl/board/apollon/Makefile
+++ b/onenand_ipl/board/apollon/Makefile
@@ -1,6 +1,5 @@
include $(TOPDIR)/config.mk
-include $(TOPDIR)/include/config.mk
include $(TOPDIR)/onenand_ipl/board/$(BOARDDIR)/config.mk
LDSCRIPT= $(TOPDIR)/onenand_ipl/board/$(BOARDDIR)/u-boot.onenand.lds
@@ -9,8 +8,11 @@
CFLAGS += -DCONFIG_ONENAND_IPL
OBJCLFAGS += --gap-fill=0x00
-SOBJS = start.o low_levelinit.o
-COBJS = apollon.o onenand_read.o onenand_boot.o
+SOBJS := low_levelinit.o
+SOBJS += start.o
+COBJS := apollon.o
+COBJS += onenand_read.o
+COBJS += onenand_boot.o
SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
@@ -34,28 +36,39 @@
$(onenandobj)onenand-ipl: $(OBJS)
cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
- -Map $(onenandobj)onenand-ipl.map \
- -o $(onenandobj)onenand-ipl
+ -Map $@.map -o $@
# create symbolic links from common files
# from cpu directory
$(obj)start.S:
- rm -f $(obj)start.S
- ln -s $(SRCTREE)/cpu/$(CPU)/start.S $(obj)start.S
+ @rm -f $@
+ ln -s $(SRCTREE)/cpu/$(CPU)/start.S $@
# from onenand_ipl directory
$(obj)onenand_ipl.h:
- rm -f $(obj)onenand_ipl.h
- ln -s $(SRCTREE)/onenand_ipl/onenand_ipl.h $(obj)onenand_ipl.h
+ @rm -f $@
+ ln -s $(SRCTREE)/onenand_ipl/onenand_ipl.h $@
$(obj)onenand_boot.c: $(obj)onenand_ipl.h
- rm -f $(obj)onenand_boot.c
- ln -s $(SRCTREE)/onenand_ipl/onenand_boot.c $(obj)onenand_boot.c
+ @rm -f $@
+ ln -s $(SRCTREE)/onenand_ipl/onenand_boot.c $@
$(obj)onenand_read.c: $(obj)onenand_ipl.h
- rm -f $(obj)onenand_read.c
- ln -s $(SRCTREE)/onenand_ipl/onenand_read.c $(obj)onenand_read.c
+ @rm -f $@
+ ln -s $(SRCTREE)/onenand_ipl/onenand_read.c $@
+
+ifneq ($(OBJTREE), $(SRCTREE))
+$(obj)apollon.c:
+ @rm -f $@
+ ln -s $(SRCTREE)/onenand_ipl/board/$(BOARDDIR)/apollon.c $@
+
+$(obj)low_levelinit.S:
+ @rm -f $@
+ ln -s $(SRCTREE)/onenand_ipl/board/$(BOARDDIR)/low_levelinit.S $@
+endif
+
+#########################################################################
$(obj)%.o: $(obj)%.S
$(CC) $(AFLAGS) -c -o $@ $<
@@ -63,6 +76,9 @@
$(obj)%.o: $(obj)$.c
$(CC) $(CFLAGS) -c -o $@ $<
+# defines $(obj).depend target
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
+
+#########################################################################
diff --git a/post/cpu/ppc4xx/spr.c b/post/cpu/ppc4xx/spr.c
index 6152eb2..110df6e 100644
--- a/post/cpu/ppc4xx/spr.c
+++ b/post/cpu/ppc4xx/spr.c
@@ -76,7 +76,9 @@
{0x3b, "CSRR1", 0x00000000, 0x00000000},
{0x3d, "DEAR", 0x00000000, 0x00000000},
{0x3e, "ESR", 0x00000000, 0x00000000},
+#ifdef CONFIG_440
{0x3f, "IVPR", 0xffff0000, 0x00000000},
+#endif
{0x100, "USPRG0", 0x00000000, 0x00000000},
{0x104, "SPRG4", 0x00000000, 0x00000000},
{0x105, "SPRG5", 0x00000000, 0x00000000},
diff --git a/post/lib_ppc/b.c b/post/lib_ppc/b.c
index 45b9ff2..7a2583d 100644
--- a/post/lib_ppc/b.c
+++ b/post/lib_ppc/b.c
@@ -95,6 +95,7 @@
{
int ret = 0;
unsigned int i;
+ int flag = disable_interrupts();
if (ret == 0)
{
@@ -188,6 +189,9 @@
}
}
+ if (flag)
+ enable_interrupts();
+
return ret;
}
diff --git a/post/lib_ppc/cmp.c b/post/lib_ppc/cmp.c
index 8d80f86..13809d4 100644
--- a/post/lib_ppc/cmp.c
+++ b/post/lib_ppc/cmp.c
@@ -102,6 +102,7 @@
{
int ret = 0;
unsigned int i;
+ int flag = disable_interrupts();
for (i = 0; i < cpu_post_cmp_size && ret == 0; i++)
{
@@ -124,6 +125,9 @@
}
}
+ if (flag)
+ enable_interrupts();
+
return ret;
}
diff --git a/post/lib_ppc/cmpi.c b/post/lib_ppc/cmpi.c
index 92b4d57..5ecfe87 100644
--- a/post/lib_ppc/cmpi.c
+++ b/post/lib_ppc/cmpi.c
@@ -102,6 +102,7 @@
{
int ret = 0;
unsigned int i;
+ int flag = disable_interrupts();
for (i = 0; i < cpu_post_cmpi_size && ret == 0; i++)
{
@@ -124,6 +125,9 @@
}
}
+ if (flag)
+ enable_interrupts();
+
return ret;
}
diff --git a/post/lib_ppc/complex.c b/post/lib_ppc/complex.c
index 271392a..4983c51 100644
--- a/post/lib_ppc/complex.c
+++ b/post/lib_ppc/complex.c
@@ -101,6 +101,7 @@
int cpu_post_test_complex (void)
{
int ret = 0;
+ int flag = disable_interrupts();
if (ret == 0)
{
@@ -117,6 +118,9 @@
post_log ("Error at complex test !\n");
}
+ if (flag)
+ enable_interrupts();
+
return ret;
}
diff --git a/post/lib_ppc/cr.c b/post/lib_ppc/cr.c
index 0bd9e74..2c7976a 100644
--- a/post/lib_ppc/cr.c
+++ b/post/lib_ppc/cr.c
@@ -248,6 +248,7 @@
int ret = 0;
unsigned int i;
unsigned long cr_sav;
+ int flag = disable_interrupts();
asm ( "mfcr %0" : "=r" (cr_sav) : );
@@ -347,6 +348,9 @@
asm ( "mtcr %0" : : "r" (cr_sav));
+ if (flag)
+ enable_interrupts();
+
return ret;
}
diff --git a/post/lib_ppc/load.c b/post/lib_ppc/load.c
index 86bc223..eccebb7 100644
--- a/post/lib_ppc/load.c
+++ b/post/lib_ppc/load.c
@@ -178,6 +178,7 @@
{
int ret = 0;
unsigned int i;
+ int flag = disable_interrupts();
for (i = 0; i < cpu_post_load_size && ret == 0; i++)
{
@@ -246,6 +247,9 @@
}
}
+ if (flag)
+ enable_interrupts();
+
return ret;
}
diff --git a/post/lib_ppc/multi.c b/post/lib_ppc/multi.c
index 5d3f584..47135ab 100644
--- a/post/lib_ppc/multi.c
+++ b/post/lib_ppc/multi.c
@@ -44,6 +44,7 @@
{
int ret = 0;
unsigned int i;
+ int flag = disable_interrupts();
if (ret == 0)
{
@@ -72,6 +73,9 @@
post_log ("Error at multi test !\n");
}
+ if (flag)
+ enable_interrupts();
+
return ret;
}
diff --git a/post/lib_ppc/store.c b/post/lib_ppc/store.c
index 09ec485..c96f263 100644
--- a/post/lib_ppc/store.c
+++ b/post/lib_ppc/store.c
@@ -163,6 +163,7 @@
{
int ret = 0;
unsigned int i;
+ int flag = disable_interrupts();
for (i = 0; i < cpu_post_store_size && ret == 0; i++)
{
@@ -226,6 +227,9 @@
}
}
+ if (flag)
+ enable_interrupts();
+
return ret;
}
diff --git a/post/lib_ppc/string.c b/post/lib_ppc/string.c
index b2daa88..3683ac9 100644
--- a/post/lib_ppc/string.c
+++ b/post/lib_ppc/string.c
@@ -47,6 +47,7 @@
{
int ret = 0;
unsigned int i;
+ int flag = disable_interrupts();
if (ret == 0)
{
@@ -97,6 +98,9 @@
post_log ("Error at string test !\n");
}
+ if (flag)
+ enable_interrupts();
+
return ret;
}