Merge branch 'tom' of git://git.denx.de/u-boot-x86
diff --git a/README b/README
index 61851b3..80a1bfa 100644
--- a/README
+++ b/README
@@ -264,6 +264,17 @@
directory according to the instructions in cogent/README.
+Sandbox Environment:
+--------------------
+
+U-Boot can be built natively to run on a Linux host using the 'sandbox'
+board. This allows feature development which is not board- or architecture-
+specific to be undertaken on a native platform. The sandbox is also used to
+run some of U-Boot's tests.
+
+See board/sandbox/sandbox/README.sandbox for more details.
+
+
Configuration Options:
----------------------
diff --git a/arch/sandbox/config.mk b/arch/sandbox/config.mk
index e094ae2..c3f889f 100644
--- a/arch/sandbox/config.mk
+++ b/arch/sandbox/config.mk
@@ -18,3 +18,9 @@
$(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map
CONFIG_ARCH_DEVICE_TREE := sandbox
+
+# Define this to avoid linking with SDL, which requires SDL libraries
+# This can solve 'sdl-config: Command not found' errors
+ifneq ($(NO_SDL),)
+PLATFORM_CPPFLAGS += -DSANDBOX_NO_SDL
+endif
diff --git a/arch/sandbox/dts/.gitignore b/arch/sandbox/dts/.gitignore
new file mode 100644
index 0000000..b60ed20
--- /dev/null
+++ b/arch/sandbox/dts/.gitignore
@@ -0,0 +1 @@
+*.dtb
diff --git a/arch/sandbox/lib/Makefile b/arch/sandbox/lib/Makefile
index 4c1a38d..6480ebf 100644
--- a/arch/sandbox/lib/Makefile
+++ b/arch/sandbox/lib/Makefile
@@ -8,4 +8,4 @@
#
-obj-y += interrupts.o
+obj-y += interrupts.o sandbox.o
diff --git a/board/sandbox/sandbox/sandbox.c b/arch/sandbox/lib/sandbox.c
similarity index 100%
rename from board/sandbox/sandbox/sandbox.c
rename to arch/sandbox/lib/sandbox.c
diff --git a/board/sandbox/sandbox/Makefile b/board/sandbox/sandbox/Makefile
deleted file mode 100644
index a0b9880..0000000
--- a/board/sandbox/sandbox/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Copyright (c) 2011 The Chromium OS Authors.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := sandbox.o
diff --git a/board/sandbox/sandbox/README.sandbox b/board/sandbox/sandbox/README.sandbox
deleted file mode 100644
index 6989557..0000000
--- a/board/sandbox/sandbox/README.sandbox
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Copyright (c) 2011 The Chromium OS Authors.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-Native Execution of U-Boot
-==========================
-
-The 'sandbox' architecture is designed to allow U-Boot to run under Linux on
-almost any hardware. To achieve this it builds U-Boot (so far as possible)
-as a normal C application with a main() and normal C libraries.
-
-All of U-Boot's architecture-specific code therefore cannot be built as part
-of the sandbox U-Boot. The purpose of running U-Boot under Linux is to test
-all the generic code, not specific to any one architecture. The idea is to
-create unit tests which we can run to test this upper level code.
-
-CONFIG_SANDBOX is defined when building a native board.
-
-The chosen vendor and board names are also 'sandbox', so there is a single
-board in board/sandbox/sandbox.
-
-CONFIG_SANDBOX_BIG_ENDIAN should be defined when running on big-endian
-machines.
-
-Note that standalone/API support is not available at present.
-
-The serial driver is a very simple implementation which reads and writes to
-the console. It does not set the terminal into raw mode, so cursor keys and
-history will not work yet.
-
-
-SPI Emulation
--------------
-
-Sandbox supports SPI and SPI flash emulation.
-
-This is controlled by the spi_sf argument, the format of which is:
-
- bus:cs:device:file
-
- bus - SPI bus number
- cs - SPI chip select number
- device - SPI device emulation name
- file - File on disk containing the data
-
-For example:
-
- dd if=/dev/zero of=spi.bin bs=1M count=4
- ./u-boot --spi_sf 0:0:M25P16:spi.bin
-
-With this setup you can issue SPI flash commands as normal:
-
-=>sf probe
-SF: Detected M25P16 with page size 64 KiB, total 2 MiB
-=>sf read 0 0 10000
-SF: 65536 bytes @ 0x0 Read: OK
-=>
-
-Since this is a full SPI emulation (rather than just flash), you can
-also use low-level SPI commands:
-
-=>sspi 0:0 32 9f
-FF202015
-
-This is issuing a READ_ID command and getting back 20 (ST Micro) part
-0x2015 (the M25P16).
-
-Drivers are connected to a particular bus/cs using sandbox's state
-structure (see the 'spi' member). A set of operations must be provided
-for each driver.
-
-
-Configuration settings for the curious are:
-
-CONFIG_SANDBOX_SPI_MAX_BUS
- The maximum number of SPI buses supported by the driver (default 1).
-
-CONFIG_SANDBOX_SPI_MAX_CS
- The maximum number of chip selects supported by the driver
- (default 10).
-
-CONFIG_SPI_IDLE_VAL
- The idle value on the SPI bus
-
-
-Tests
------
-
-So far we have no tests, but when we do these will be documented here.
diff --git a/boards.cfg b/boards.cfg
index 2eadd0d..da46c21 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -1182,7 +1182,7 @@
Active powerpc ppc4xx - xilinx ppc405-generic xilinx-ppc405-generic_flash xilinx-ppc405-generic:SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC Ricardo Ribalda <ricardo.ribalda@uam.es>
Active powerpc ppc4xx - xilinx ppc440-generic xilinx-ppc440-generic xilinx-ppc440-generic:SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,BOOT_FROM_XMD=1 Ricardo Ribalda <ricardo.ribalda@uam.es>
Active powerpc ppc4xx - xilinx ppc440-generic xilinx-ppc440-generic_flash xilinx-ppc440-generic:SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC Ricardo Ribalda <ricardo.ribalda@uam.es>
-Active sandbox sandbox - sandbox sandbox sandbox - Simon Glass <sjg@chromium.org>
+Active sandbox sandbox - - <none> sandbox - Simon Glass <sjg@chromium.org>
Active sh sh2 - renesas rsk7203 rsk7203 - Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>:Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Active sh sh2 - renesas rsk7264 rsk7264 - Phil Edworthy <phil.edworthy@renesas.com>
Active sh sh2 - renesas rsk7269 rsk7269 - -
diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c
index c53601c..f4e306c 100644
--- a/common/cmd_nvedit.c
+++ b/common/cmd_nvedit.c
@@ -33,6 +33,7 @@
#include <watchdog.h>
#include <linux/stddef.h>
#include <asm/byteorder.h>
+#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -846,7 +847,8 @@
int argc, char * const argv[])
{
char buf[32];
- char *addr, *cmd, *res;
+ ulong addr;
+ char *ptr, *cmd, *res;
size_t size = 0;
ssize_t len;
env_t *envp;
@@ -891,10 +893,11 @@
if (argc < 1)
return CMD_RET_USAGE;
- addr = (char *)simple_strtoul(argv[0], NULL, 16);
+ addr = simple_strtoul(argv[0], NULL, 16);
+ ptr = map_sysmem(addr, size);
if (size)
- memset(addr, '\0', size);
+ memset(ptr, '\0', size);
argc--;
argv++;
@@ -902,7 +905,7 @@
if (sep) { /* export as text file */
len = hexport_r(&env_htab, sep,
H_MATCH_KEY | H_MATCH_IDENT,
- &addr, size, argc, argv);
+ &ptr, size, argc, argv);
if (len < 0) {
error("Cannot export environment: errno = %d\n", errno);
return 1;
@@ -913,12 +916,12 @@
return 0;
}
- envp = (env_t *)addr;
+ envp = (env_t *)ptr;
if (chk) /* export as checksum protected block */
res = (char *)envp->data;
else /* export as raw binary data */
- res = addr;
+ res = ptr;
len = hexport_r(&env_htab, '\0',
H_MATCH_KEY | H_MATCH_IDENT,
@@ -960,7 +963,8 @@
static int do_env_import(cmd_tbl_t *cmdtp, int flag,
int argc, char * const argv[])
{
- char *cmd, *addr;
+ ulong addr;
+ char *cmd, *ptr;
char sep = '\n';
int chk = 0;
int fmt = 0;
@@ -1004,7 +1008,8 @@
if (!fmt)
printf("## Warning: defaulting to text format\n");
- addr = (char *)simple_strtoul(argv[0], NULL, 16);
+ addr = simple_strtoul(argv[0], NULL, 16);
+ ptr = map_sysmem(addr, 0);
if (argc == 2) {
size = simple_strtoul(argv[1], NULL, 16);
@@ -1012,7 +1017,7 @@
puts("## Error: external checksum format must pass size\n");
return CMD_RET_FAILURE;
} else {
- char *s = addr;
+ char *s = ptr;
size = 0;
@@ -1032,7 +1037,7 @@
if (chk) {
uint32_t crc;
- env_t *ep = (env_t *)addr;
+ env_t *ep = (env_t *)ptr;
size -= offsetof(env_t, data);
memcpy(&crc, &ep->crc, sizeof(crc));
@@ -1041,11 +1046,11 @@
puts("## Error: bad CRC, import failed\n");
return 1;
}
- addr = (char *)ep->data;
+ ptr = (char *)ep->data;
}
- if (himport_r(&env_htab, addr, size, sep, del ? 0 : H_NOCLEAR,
- 0, NULL) == 0) {
+ if (himport_r(&env_htab, ptr, size, sep, del ? 0 : H_NOCLEAR, 0,
+ NULL) == 0) {
error("Environment import failed: errno = %d\n", errno);
return 1;
}
diff --git a/common/main.c b/common/main.c
index e54f63b..9bee7bd 100644
--- a/common/main.c
+++ b/common/main.c
@@ -1550,7 +1550,7 @@
return 1;
}
- if (run_command(arg, flag) != 0)
+ if (run_command_list(arg, -1, flag) != 0)
return 1;
}
return 0;
diff --git a/doc/README.sandbox b/doc/README.sandbox
new file mode 100644
index 0000000..529c447
--- /dev/null
+++ b/doc/README.sandbox
@@ -0,0 +1,299 @@
+/*
+ * Copyright (c) 2014 The Chromium OS Authors.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+Native Execution of U-Boot
+==========================
+
+The 'sandbox' architecture is designed to allow U-Boot to run under Linux on
+almost any hardware. To achieve this it builds U-Boot (so far as possible)
+as a normal C application with a main() and normal C libraries.
+
+All of U-Boot's architecture-specific code therefore cannot be built as part
+of the sandbox U-Boot. The purpose of running U-Boot under Linux is to test
+all the generic code, not specific to any one architecture. The idea is to
+create unit tests which we can run to test this upper level code.
+
+CONFIG_SANDBOX is defined when building a native board.
+
+The chosen vendor and board names are also 'sandbox', so there is a single
+board in board/sandbox/sandbox.
+
+CONFIG_SANDBOX_BIG_ENDIAN should be defined when running on big-endian
+machines.
+
+Note that standalone/API support is not available at present.
+
+
+Basic Operation
+---------------
+
+To run sandbox U-Boot use something like:
+
+ make sandbox_config all
+ ./u-boot
+
+Note:
+ If you get errors about 'sdl-config: Command not found' you may need to
+ install libsdl1.2-dev or similar to get SDL support. Alternatively you can
+ build sandbox without SDL (i.e. no display/keyboard support) by removing
+ the CONFIG_SANDBOX_SDL line in include/configs/sandbox.h or using:
+
+ make sandbox_config all NO_SDL=1
+ ./u-boot
+
+
+U-Boot will start on your computer, showing a sandbox emulation of the serial
+console:
+
+
+U-Boot 2014.04 (Mar 20 2014 - 19:06:00)
+
+DRAM: 128 MiB
+Using default environment
+
+In: serial
+Out: lcd
+Err: lcd
+=>
+
+You can issue commands as your would normally. If the command you want is
+not supported you can add it to include/configs/sandbox.h.
+
+To exit, type 'reset' or press Ctrl-C.
+
+
+Console / LCD support
+---------------------
+
+Assuming that CONFIG_SANDBOX_SDL is defined when building, you can run the
+sandbox with LCD and keyboard emulation, using something like:
+
+ ./u-boot -d u-boot.dtb -l
+
+This will start U-Boot with a window showing the contents of the LCD. If
+that window has the focus then you will be able to type commands as you
+would on the console. You can adjust the display settings in the device
+tree file - see arch/sandbox/dts/sandbox.dts.
+
+
+Command-line Options
+--------------------
+
+Various options are available, mostly for test purposes. Use -h to see
+available options. Some of these are described below.
+
+The terminal is normally in what is called 'raw-with-sigs' mode. This means
+that you can use arrow keys for command editing and history, but if you
+press Ctrl-C, U-Boot will exit instead of handling this as a keypress.
+
+Other options are 'raw' (so Ctrl-C is handled within U-Boot) and 'cooked'
+(where the terminal is in cooked mode and cursor keys will not work, Ctrl-C
+will exit).
+
+As mentioned above, -l causes the LCD emulation window to be shown.
+
+A device tree binary file can be provided with -d. If you edit the source
+(it is stored at arch/sandbox/dts/sandbox.dts) you must rebuild U-Boot to
+recreate the binary file.
+
+To execute commands directly, use the -c option. You can specify a single
+command, or multiple commands separated by a semicolon, as is normal in
+U-Boot. Be careful with quoting as the shall will normally process and
+swallow quotes. When -c is used, U-Boot exists after the command is complete,
+but you can force it to go to interactive mode instead with -i.
+
+
+Memory Emulation
+----------------
+
+Memory emulation is supported, with the size set by CONFIG_SYS_SDRAM_SIZE.
+The -m option can be used to read memory from a file on start-up and write
+it when shutting down. This allows preserving of memory contents across
+test runs. You can tell U-Boot to remove the memory file after it is read
+(on start-up) with the --rm_memory option.
+
+To access U-Boot's emulated memory within the code, use map_sysmem(). This
+function is used throughout U-Boot to ensure that emulated memory is used
+rather than the U-Boot application memory. This provides memory starting
+at 0 and extending to the size of the emulation.
+
+
+Storing State
+-------------
+
+With sandbox you can write drivers which emulate the operation of drivers on
+real devices. Some of these drivers may want to record state which is
+preserved across U-Boot runs. This is particularly useful for testing. For
+example, the contents of a SPI flash chip should not disappear just because
+U-Boot exits.
+
+State is stored in a device tree file in a simple format which is driver-
+specific. You then use the -s option to specify the state file. Use -r to
+make U-Boot read the state on start-up (otherwise it starts empty) and -w
+to write it on exit (otherwise the stored state is left unchanged and any
+changes U-Boot made will be lost). You can also use -n to tell U-Boot to
+ignore any problems with missing state. This is useful when first running
+since the state file will be empty.
+
+The device tree file has one node for each driver - the driver can store
+whatever properties it likes in there. See 'Writing Sandbox Drivers' below
+for more details on how to get drivers to read and write their state.
+
+
+Running and Booting
+-------------------
+
+Since there is no machine architecture, sandbox U-Boot cannot actually boot
+a kernel, but it does support the bootm command. Filesystems, memory
+commands, hashing, FIT images, verified boot and many other features are
+supported.
+
+When 'bootm' runs a kernel, sandbox will exit, as U-Boot does on a real
+machine. Of course in this case, no kernel is run.
+
+It is also possible to tell U-Boot that it has jumped from a temporary
+previous U-Boot binary, with the -j option. That binary is automatically
+removed by the U-Boot that gets the -j option. This allows you to write
+tests which emulate the action of chain-loading U-Boot, typically used in
+a situation where a second 'updatable' U-Boot is stored on your board. It
+is very risky to overwrite or upgrade the only U-Boot on a board, since a
+power or other failure will brick the board and require return to the
+manufacturer in the case of a consumer device.
+
+
+Supported Drivers
+-----------------
+
+U-Boot sandbox supports these emulations:
+
+- Block devices
+- Chrome OS EC
+- GPIO
+- Host filesystem (access files on the host from within U-Boot)
+- Keyboard (Chrome OS)
+- LCD
+- Serial (for console only)
+- Sound (incomplete - see sandbox_sdl_sound_init() for details)
+- SPI
+- SPI flash
+- TPM (Trusted Platform Module)
+
+Notable omissions are networking and I2C.
+
+A wide range of commands is implemented. Filesystems which use a block
+device are supported.
+
+Also sandbox uses generic board (CONFIG_SYS_GENERIC_BOARD) and supports
+driver model (CONFIG_DM) and associated commands.
+
+
+SPI Emulation
+-------------
+
+Sandbox supports SPI and SPI flash emulation.
+
+This is controlled by the spi_sf argument, the format of which is:
+
+ bus:cs:device:file
+
+ bus - SPI bus number
+ cs - SPI chip select number
+ device - SPI device emulation name
+ file - File on disk containing the data
+
+For example:
+
+ dd if=/dev/zero of=spi.bin bs=1M count=4
+ ./u-boot --spi_sf 0:0:M25P16:spi.bin
+
+With this setup you can issue SPI flash commands as normal:
+
+=>sf probe
+SF: Detected M25P16 with page size 64 KiB, total 2 MiB
+=>sf read 0 0 10000
+SF: 65536 bytes @ 0x0 Read: OK
+=>
+
+Since this is a full SPI emulation (rather than just flash), you can
+also use low-level SPI commands:
+
+=>sspi 0:0 32 9f
+FF202015
+
+This is issuing a READ_ID command and getting back 20 (ST Micro) part
+0x2015 (the M25P16).
+
+Drivers are connected to a particular bus/cs using sandbox's state
+structure (see the 'spi' member). A set of operations must be provided
+for each driver.
+
+
+Configuration settings for the curious are:
+
+CONFIG_SANDBOX_SPI_MAX_BUS
+ The maximum number of SPI buses supported by the driver (default 1).
+
+CONFIG_SANDBOX_SPI_MAX_CS
+ The maximum number of chip selects supported by the driver
+ (default 10).
+
+CONFIG_SPI_IDLE_VAL
+ The idle value on the SPI bus
+
+
+Writing Sandbox Drivers
+-----------------------
+
+Generally you should put your driver in a file containing the word 'sandbox'
+and put it in the same directory as other drivers of its type. You can then
+implement the same hooks as the other drivers.
+
+To access U-Boot's emulated memory, use map_sysmem() as mentioned above.
+
+If your driver needs to store configuration or state (such as SPI flash
+contents or emulated chip registers), you can use the device tree as
+described above. Define handlers for this with the SANDBOX_STATE_IO macro.
+See arch/sandbox/include/asm/state.h for documentation. In short you provide
+a node name, compatible string and functions to read and write the state.
+Since writing the state can expand the device tree, you may need to use
+state_setprop() which does this automatically and avoids running out of
+space. See existing code for examples.
+
+
+Testing
+-------
+
+U-Boot sandbox can be used to run various tests, mostly in the test/
+directory. These include:
+
+ command_ut
+ - Unit tests for command parsing and handling
+ compression
+ - Unit tests for U-Boot's compression algorithms, useful for
+ security checking. It supports gzip, bzip2, lzma and lzo.
+ driver model
+ - test/dm/test-dm.sh to run these.
+ image
+ - Unit tests for images:
+ test/image/test-imagetools.sh - multi-file images
+ test/image/test-fit.py - FIT images
+ tracing
+ - test/trace/test-trace.sh tests the tracing system (see README.trace)
+ verified boot
+ - See test/vboot/vboot_test.sh for this
+
+If you change or enhance any of the above subsystems, you shold write or
+expand a test and include it with your patch series submission. Test
+coverage in U-Boot is limited, as we need to work to improve it.
+
+Note that many of these tests are implemented as commands which you can
+run natively on your board if desired (and enabled).
+
+It would be useful to have a central script to run all of these.
+
+--
+Simon Glass <sjg@chromium.org>
+Updated 22-Mar-14
diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
index fa62cb6..6bb2546 100644
--- a/include/configs/sandbox.h
+++ b/include/configs/sandbox.h
@@ -140,8 +140,6 @@
#define CONFIG_CROS_EC
#define CONFIG_CMD_CROS_EC
#define CONFIG_CROS_EC_SANDBOX
-#define CONFIG_KEYBOARD
-#define CONFIG_CROS_EC_KEYB
#define CONFIG_ARCH_EARLY_INIT_R
#define CONFIG_BOARD_LATE_INIT
@@ -149,7 +147,12 @@
#define CONFIG_SOUND_SANDBOX
#define CONFIG_CMD_SOUND
+#ifndef SANDBOX_NO_SDL
#define CONFIG_SANDBOX_SDL
+#endif
+
+/* LCD and keyboard require SDL support */
+#ifdef CONFIG_SANDBOX_SDL
#define CONFIG_LCD
#define CONFIG_VIDEO_SANDBOX_SDL
#define CONFIG_CMD_BMP
@@ -158,9 +161,18 @@
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define LCD_BPP LCD_COLOR16
+#define CONFIG_CROS_EC_KEYB
+#define CONFIG_KEYBOARD
+
#define CONFIG_EXTRA_ENV_SETTINGS "stdin=serial,cros-ec-keyb\0" \
"stdout=serial,lcd\0" \
"stderr=serial,lcd\0"
+#else
+
+#define CONFIG_EXTRA_ENV_SETTINGS "stdin=serial\0" \
+ "stdout=serial,lcd\0" \
+ "stderr=serial,lcd\0"
+#endif
#define CONFIG_GZIP_COMPRESSED
#define CONFIG_BZIP2
diff --git a/tools/patman/README b/tools/patman/README
index b3aba13..5fb508b 100644
--- a/tools/patman/README
+++ b/tools/patman/README
@@ -192,6 +192,7 @@
A sign-off is added automatically to your patches (this is
probably a bug). If you put this tag in your patches, it will
override the default signoff that patman automatically adds.
+ Multiple duplicate signoffs will be removed.
Tested-by: Their Name <email>
Reviewed-by: Their Name <email>
diff --git a/tools/patman/commit.py b/tools/patman/commit.py
index 89cce7f..3e0adb8 100644
--- a/tools/patman/commit.py
+++ b/tools/patman/commit.py
@@ -29,6 +29,7 @@
self.tags = []
self.changes = {}
self.cc_list = []
+ self.signoff_set = set()
self.notes = []
def AddChange(self, version, info):
@@ -72,3 +73,16 @@
cc_list: List of aliases or email addresses
"""
self.cc_list += cc_list
+
+ def CheckDuplicateSignoff(self, signoff):
+ """Check a list of signoffs we have send for this patch
+
+ Args:
+ signoff: Signoff line
+ Returns:
+ True if this signoff is new, False if we have already seen it.
+ """
+ if signoff in self.signoff_set:
+ return False
+ self.signoff_set.add(signoff)
+ return True
diff --git a/tools/patman/gitutil.py b/tools/patman/gitutil.py
index 5dcbaa3..3ea256d 100644
--- a/tools/patman/gitutil.py
+++ b/tools/patman/gitutil.py
@@ -11,6 +11,7 @@
import sys
import terminal
+import checkpatch
import settings
@@ -193,6 +194,7 @@
Args:
fname: filename of patch file to apply
"""
+ col = terminal.Color()
cmd = ['git', 'am', fname]
pipe = subprocess.Popen(cmd, stdout=subprocess.PIPE,
stderr=subprocess.PIPE)
@@ -203,8 +205,8 @@
print line
match = re_error.match(line)
if match:
- print GetWarningMsg('warning', match.group(1), int(match.group(2)),
- 'Patch failed')
+ print checkpatch.GetWarningMsg(col, 'warning', match.group(1),
+ int(match.group(2)), 'Patch failed')
return pipe.returncode == 0, stdout
def ApplyPatches(verbose, args, start_point):
diff --git a/tools/patman/patchstream.py b/tools/patman/patchstream.py
index c4017e0..9f5682c 100644
--- a/tools/patman/patchstream.py
+++ b/tools/patman/patchstream.py
@@ -21,7 +21,7 @@
re_allowed_after_test = re.compile('^Signed-off-by:')
# Signoffs
-re_signoff = re.compile('^Signed-off-by:')
+re_signoff = re.compile('^Signed-off-by: *(.*)')
# The start of the cover letter
re_cover = re.compile('^Cover-letter:')
@@ -159,6 +159,7 @@
commit_tag_match = re_commit_tag.match(line)
commit_match = re_commit.match(line) if self.is_log else None
cover_cc_match = re_cover_cc.match(line)
+ signoff_match = re_signoff.match(line)
tag_match = None
if self.state == STATE_PATCH_HEADER:
tag_match = re_tag.match(line)
@@ -223,7 +224,7 @@
if is_blank:
# Blank line ends this change list
self.in_change = 0
- elif line == '---' or re_signoff.match(line):
+ elif line == '---':
self.in_change = 0
out = self.ProcessLine(line)
else:
@@ -272,6 +273,11 @@
else:
self.tags.append(line);
+ # Suppress duplicate signoffs
+ elif signoff_match:
+ if self.commit.CheckDuplicateSignoff(signoff_match.group(1)):
+ out = [line]
+
# Well that means this is an ordinary line
else:
pos = 1