ARM: zynq: DT: Add missing nodes to DTSI
Add ADC, CAN, GPIO, MC, DMA, DEVCFG, USB, Watchdog IPs to DTSI.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi
index 6faac40..fc5dd4d 100644
--- a/arch/arm/dts/zynq-7000.dtsi
+++ b/arch/arm/dts/zynq-7000.dtsi
@@ -51,6 +51,48 @@
interrupt-parent = <&intc>;
ranges;
+ adc: adc@f8007100 {
+ compatible = "xlnx,zynq-xadc-1.00.a";
+ reg = <0xf8007100 0x20>;
+ interrupts = <0 7 4>;
+ interrupt-parent = <&intc>;
+ clocks = <&clkc 12>;
+ };
+
+ can0: can@e0008000 {
+ compatible = "xlnx,zynq-can-1.0";
+ status = "disabled";
+ clocks = <&clkc 19>, <&clkc 36>;
+ clock-names = "can_clk", "pclk";
+ reg = <0xe0008000 0x1000>;
+ interrupts = <0 28 4>;
+ interrupt-parent = <&intc>;
+ tx-fifo-depth = <0x40>;
+ rx-fifo-depth = <0x40>;
+ };
+
+ can1: can@e0009000 {
+ compatible = "xlnx,zynq-can-1.0";
+ status = "disabled";
+ clocks = <&clkc 20>, <&clkc 37>;
+ clock-names = "can_clk", "pclk";
+ reg = <0xe0009000 0x1000>;
+ interrupts = <0 51 4>;
+ interrupt-parent = <&intc>;
+ tx-fifo-depth = <0x40>;
+ rx-fifo-depth = <0x40>;
+ };
+
+ gpio0: gpio@e000a000 {
+ compatible = "xlnx,zynq-gpio-1.0";
+ #gpio-cells = <2>;
+ clocks = <&clkc 42>;
+ gpio-controller;
+ interrupt-parent = <&intc>;
+ interrupts = <0 20 4>;
+ reg = <0xe000a000 0x1000>;
+ };
+
i2c0: i2c@e0004000 {
compatible = "cdns,i2c-r1p10";
status = "disabled";
@@ -91,6 +133,11 @@
cache-level = <2>;
};
+ mc: memory-controller@f8006000 {
+ compatible = "xlnx,zynq-ddrc-a05";
+ reg = <0xf8006000 0x1000>;
+ };
+
uart0: serial@e0000000 {
compatible = "xlnx,xuartps";
status = "disabled";
@@ -199,6 +246,29 @@
};
};
+ dmac_s: dmac@f8003000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0xf8003000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3",
+ "dma4", "dma5", "dma6", "dma7";
+ interrupts = <0 13 4>,
+ <0 14 4>, <0 15 4>,
+ <0 16 4>, <0 17 4>,
+ <0 40 4>, <0 41 4>,
+ <0 42 4>, <0 43 4>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <4>;
+ clocks = <&clkc 27>;
+ clock-names = "apb_pclk";
+ };
+
+ devcfg: devcfg@f8007000 {
+ compatible = "xlnx,zynq-devcfg-1.0";
+ reg = <0xf8007000 0x100>;
+ };
+
global_timer: timer@f8f00200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0xf8f00200 0x20>;
@@ -222,6 +292,7 @@
clocks = <&clkc 6>;
reg = <0xF8002000 0x1000>;
};
+
scutimer: timer@f8f00600 {
interrupt-parent = <&intc>;
interrupts = < 1 13 0x301 >;
@@ -229,5 +300,34 @@
reg = < 0xf8f00600 0x20 >;
clocks = <&clkc 4>;
} ;
+
+ usb0: usb@e0002000 {
+ compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
+ status = "disabled";
+ clocks = <&clkc 28>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 21 4>;
+ reg = <0xe0002000 0x1000>;
+ phy_type = "ulpi";
+ };
+
+ usb1: usb@e0003000 {
+ compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
+ status = "disabled";
+ clocks = <&clkc 29>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 44 4>;
+ reg = <0xe0003000 0x1000>;
+ phy_type = "ulpi";
+ };
+
+ watchdog0: watchdog@f8005000 {
+ clocks = <&clkc 45>;
+ compatible = "cdns,wdt-r1p2";
+ interrupt-parent = <&intc>;
+ interrupts = <0 9 1>;
+ reg = <0xf8005000 0x1000>;
+ timeout-sec = <10>;
+ };
};
};