Coding Style cleanup.
diff --git a/board/v38b/ethaddr.c b/board/v38b/ethaddr.c
index 1056080..aaa629e 100644
--- a/board/v38b/ethaddr.c
+++ b/board/v38b/ethaddr.c
@@ -118,7 +118,7 @@
crcval = 0;
for (i=0; i<NBYTES; i++)
-
+
if (!check_device())
*perr = ERR_NO_NUMBER;
@@ -224,7 +224,7 @@
rdat = (rdat >> 1) | 0x80;
else
rdat = rdat >> 1;
-
+
udelay(60); /* at least 60 us */
}
/* copy the return value */
diff --git a/board/v38b/v38b.c b/board/v38b/v38b.c
index c56c6c8..99fe7db 100644
--- a/board/v38b/v38b.c
+++ b/board/v38b/v38b.c
@@ -250,4 +250,3 @@
{
/* TODO fill this in */
}
-
diff --git a/doc/README.nand b/doc/README.nand
index 2b9a529..5279a4f 100644
--- a/doc/README.nand
+++ b/doc/README.nand
@@ -1,9 +1,7 @@
NAND FLASH commands and notes
-
See NOTE below!!!
-
# (C) Copyright 2003
# Dave Ellis, SIXNET, dge@sixnetio.com
#
@@ -209,7 +207,6 @@
with DoC will break).
-
Additional improvements to the NAND subsystem by Guido Classen, 10-10-2006
JFFS2 related commands:
diff --git a/include/configs/V38B.h b/include/configs/V38B.h
index 9b8fc69..8eea504 100644
--- a/include/configs/V38B.h
+++ b/include/configs/V38B.h
@@ -11,7 +11,7 @@
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
@@ -35,35 +35,35 @@
* (easy to change)
*/
-#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
-#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */
-#define CONFIG_V38B 1 /* ... on V38B board */
-#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
+#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
+#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */
+#define CONFIG_V38B 1 /* ... on V38B board */
+#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
-#define CONFIG_RTC_PCF8563 1 /* has PCF8563 RTC */
-#define CONFIG_MPC5200_DDR 1 /* has DDR SDRAM */
-#define CONFIG_HW_WATCHDOG 1 /* has watchdog */
+#define CONFIG_RTC_PCF8563 1 /* has PCF8563 RTC */
+#define CONFIG_MPC5200_DDR 1 /* has DDR SDRAM */
+#define CONFIG_HW_WATCHDOG 1 /* has watchdog */
#define CONFIG_NETCONSOLE 1
-#define CONFIG_BOARD_EARLY_INIT_R 1 /* make flash read/write */
+#define CONFIG_BOARD_EARLY_INIT_R 1 /* make flash read/write */
-#define CFG_XLB_PIPELINING 1 /* gives better performance */
+#define CFG_XLB_PIPELINING 1 /* gives better performance */
-#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
/*
* Serial console configuration
*/
-#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
-#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
+#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
+#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
@@ -97,12 +97,12 @@
#define CONFIG_USB_OHCI
#define CONFIG_USB_STORAGE
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+#define CONFIG_TIMESTAMP /* Print image info with timestamp */
/*
* Supported commands
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
CFG_CMD_FAT | \
CFG_CMD_I2C | \
CFG_CMD_IDE | \
@@ -112,7 +112,7 @@
CFG_CMD_IRQ | \
CFG_CMD_JFFS2 | \
CFG_CMD_MII | \
- CFG_CMD_SDRAMi | \
+ CFG_CMD_SDRAMi | \
CFG_CMD_DATE | \
CFG_CMD_USB | \
CFG_CMD_FAT)
@@ -123,7 +123,7 @@
/*
* Boot low with 16 MB Flash
*/
-# define CFG_LOWBOOT 1
+# define CFG_LOWBOOT 1
# define CFG_LOWBOOT16 1
/*
@@ -131,35 +131,35 @@
*/
#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
-#define CONFIG_PREBOOT "echo;" \
+#define CONFIG_PREBOOT "echo;" \
"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
"echo"
#undef CONFIG_BOOTARGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "devno=5\0" \
- "hostname=V38B_$(devno)\0" \
- "ipaddr=10.100.99.$(devno)\0" \
- "netmask=255.255.0.0\0" \
- "serverip=10.100.10.90\0" \
- "gatewayip=10.100.254.254\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
- "rootpath=/opt/eldk/ppc_6xx\0" \
- "bootfile=mpc5200/uImage\0" \
- "bootcmd=run net_nfs\0" \
- "addip=setenv bootargs $(bootargs) " \
- "ip=$(ipaddr):$(serverip):$(gatewayip):" \
- "$(netmask):$(hostname):$(netdev):off panic=1\0" \
- "flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0" \
- "flash_self=run ramargs addip;bootm $(kernel_addr) " \
- "$(ramdisk_addr)\0" \
- "net_nfs=tftp 200000 $(bootfile);run nfsargs " \
- "addip;bootm\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=$(serverip):$(rootpath)\0" \
- ""
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "devno=5\0" \
+ "hostname=V38B_$(devno)\0" \
+ "ipaddr=10.100.99.$(devno)\0" \
+ "netmask=255.255.0.0\0" \
+ "serverip=10.100.10.90\0" \
+ "gatewayip=10.100.254.254\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "rootpath=/opt/eldk/ppc_6xx\0" \
+ "bootfile=mpc5200/uImage\0" \
+ "bootcmd=run net_nfs\0" \
+ "addip=setenv bootargs $(bootargs) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):" \
+ "$(netmask):$(hostname):$(netdev):off panic=1\0" \
+ "flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0" \
+ "flash_self=run ramargs addip;bootm $(kernel_addr) " \
+ "$(ramdisk_addr)\0" \
+ "net_nfs=tftp 200000 $(bootfile);run nfsargs " \
+ "addip;bootm\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath)\0" \
+ ""
#define CONFIG_BOOTCOMMAND "run net_nfs"
@@ -196,13 +196,13 @@
*/
#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
-#define CFG_FLASH_CFI_AMD_RESET 1
+#define CFG_FLASH_CFI_AMD_RESET 1
#define CFG_FLASH_BASE 0xFF000000
#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */
#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
#define CFG_FLASH_SIZE 0x01000000 /* 16 MiB */
#define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */
-#define CFG_FLASH_USE_BUFFER_WRITE 1 /* flash write speed-up */
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* flash write speed-up */
/*
* Environment settings
@@ -243,7 +243,7 @@
*/
#define CONFIG_MPC5xxx_FEC 1
#define CONFIG_PHY_ADDR 0x00
-#define CONFIG_MII 1
+#define CONFIG_MII 1
/*
* GPIO configuration
@@ -307,12 +307,12 @@
*-----------------------------------------------------------------------
*/
-#undef CONFIG_IDE_8xx_PCCARD /* Don't use IDE with PC Card Adapter */
+#undef CONFIG_IDE_8xx_PCCARD /* Don't use IDE with PC Card Adapter */
-#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
-#undef CONFIG_IDE_LED /* LED for ide not supported */
+#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
+#undef CONFIG_IDE_LED /* LED for ide not supported */
-#define CONFIG_IDE_RESET /* reset for ide supported */
+#define CONFIG_IDE_RESET /* reset for ide supported */
#define CONFIG_IDE_PREINIT
#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
@@ -331,13 +331,13 @@
/* Offset for alternate registers */
#define CFG_ATA_ALT_OFFSET (0x005C)
-/* Interval between registers */
-#define CFG_ATA_STRIDE 4
+/* Interval between registers */
+#define CFG_ATA_STRIDE 4
-/* Status LED */
+/* Status LED */
-#define CONFIG_STATUS_LED /* Status LED enabled */
-#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */
+#define CONFIG_STATUS_LED /* Status LED enabled */
+#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */
#define CFG_LED_BASE (0xf0000600 + 0x70) /* Timer 7 GPIO */