Fix block device accesses beyond 2TiB

With CONFIG_SYS_64BIT_LBA, lbaint_t gets defined as a 64-bit type,
which is required to represent block numbers for storage devices that
exceed 2TiB (the block size usually is 512B), e.g. recent hard drives.

For some obscure reason, the current U-Boot code uses lbaint_t for the
number of blocks to read (a rather optimistic estimation of how RAM
sizes will evolve), but not for the starting address. Trying to access
blocks beyond the 2TiB boundary will simply wrap around and read a
block within the 0..2TiB range.

We now use lbaint_t for block start addresses, too. This required
changes to all block drivers as the signature of block_read(),
block_write() and block_erase() in block_dev_desc_t changed.

Signed-off-by: Sascha Silbe <t-uboot@infra-silbe.de>
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index 78b4aa7..59e95df 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -830,7 +830,7 @@
 
 /* ------------------------------------------------------------------------- */
 
-ulong ide_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer)
+ulong ide_read(int device, lbaint_t blknr, lbaint_t blkcnt, void *buffer)
 {
 	ulong n = 0;
 	unsigned char c;
@@ -844,7 +844,7 @@
 		lba48 = 1;
 	}
 #endif
-	debug("ide_read dev %d start %lX, blocks " LBAF " buffer at %lX\n",
+	debug("ide_read dev %d start " LBAF ", blocks " LBAF " buffer at %lX\n",
 	      device, blknr, blkcnt, (ulong) buffer);
 
 	ide_led(DEVICE_LED(device), 1);	/* LED on       */
@@ -934,8 +934,8 @@
 
 		if ((c & (ATA_STAT_DRQ | ATA_STAT_BUSY | ATA_STAT_ERR)) !=
 		    ATA_STAT_DRQ) {
-			printf("Error (no IRQ) dev %d blk %ld: status %#02x\n",
-				device, blknr, c);
+			printf("Error (no IRQ) dev %d blk " LBAF ": status "
+			       "%#02x\n", device, blknr, c);
 			break;
 		}
 
@@ -954,7 +954,7 @@
 /* ------------------------------------------------------------------------- */
 
 
-ulong ide_write(int device, ulong blknr, lbaint_t blkcnt, const void *buffer)
+ulong ide_write(int device, lbaint_t blknr, lbaint_t blkcnt, const void *buffer)
 {
 	ulong n = 0;
 	unsigned char c;
@@ -1022,8 +1022,8 @@
 
 		if ((c & (ATA_STAT_DRQ | ATA_STAT_BUSY | ATA_STAT_ERR)) !=
 		    ATA_STAT_DRQ) {
-			printf("Error (no IRQ) dev %d blk %ld: status %#02x\n",
-				device, blknr, c);
+			printf("Error (no IRQ) dev %d blk " LBAF ": status "
+				"%#02x\n", device, blknr, c);
 			goto WR_OUT;
 		}
 
diff --git a/common/usb_storage.c b/common/usb_storage.c
index 457970f..4599d03 100644
--- a/common/usb_storage.c
+++ b/common/usb_storage.c
@@ -170,9 +170,9 @@
 		      block_dev_desc_t *dev_desc);
 int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,
 		      struct us_data *ss);
-unsigned long usb_stor_read(int device, unsigned long blknr,
+unsigned long usb_stor_read(int device, lbaint_t blknr,
 			    lbaint_t blkcnt, void *buffer);
-unsigned long usb_stor_write(int device, unsigned long blknr,
+unsigned long usb_stor_write(int device, lbaint_t blknr,
 			     lbaint_t blkcnt, const void *buffer);
 struct usb_device * usb_get_dev_index(int index);
 void uhci_show_temp_int_td(void);
@@ -1054,7 +1054,7 @@
 }
 #endif /* CONFIG_USB_BIN_FIXUP */
 
-unsigned long usb_stor_read(int device, unsigned long blknr,
+unsigned long usb_stor_read(int device, lbaint_t blknr,
 			    lbaint_t blkcnt, void *buffer)
 {
 	lbaint_t start, blks;
@@ -1127,7 +1127,7 @@
 	return blkcnt;
 }
 
-unsigned long usb_stor_write(int device, unsigned long blknr,
+unsigned long usb_stor_write(int device, lbaint_t blknr,
 				lbaint_t blkcnt, const void *buffer)
 {
 	lbaint_t start, blks;
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 83d2df7..73f7195 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -254,7 +254,7 @@
 }
 
 static unsigned long
-mmc_berase(int dev_num, unsigned long start, lbaint_t blkcnt)
+mmc_berase(int dev_num, lbaint_t start, lbaint_t blkcnt)
 {
 	int err = 0;
 	struct mmc *mmc = find_mmc_device(dev_num);
@@ -266,7 +266,8 @@
 
 	if ((start % mmc->erase_grp_size) || (blkcnt % mmc->erase_grp_size))
 		printf("\n\nCaution! Your devices Erase group is 0x%x\n"
-			"The erase range would be change to 0x%lx~0x%lx\n\n",
+		       "The erase range would be change to "
+		       "0x" LBAF "~0x" LBAF "\n\n",
 		       mmc->erase_grp_size, start & ~(mmc->erase_grp_size - 1),
 		       ((start + blkcnt + mmc->erase_grp_size)
 		       & ~(mmc->erase_grp_size - 1)) - 1);
@@ -289,14 +290,14 @@
 }
 
 static ulong
-mmc_write_blocks(struct mmc *mmc, ulong start, lbaint_t blkcnt, const void*src)
+mmc_write_blocks(struct mmc *mmc, lbaint_t start, lbaint_t blkcnt, const void*src)
 {
 	struct mmc_cmd cmd;
 	struct mmc_data data;
 	int timeout = 1000;
 
 	if ((start + blkcnt) > mmc->block_dev.lba) {
-		printf("MMC: block number 0x%lx exceeds max(0x%lx)\n",
+		printf("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n",
 			start + blkcnt, mmc->block_dev.lba);
 		return 0;
 	}
@@ -346,7 +347,7 @@
 }
 
 static ulong
-mmc_bwrite(int dev_num, ulong start, lbaint_t blkcnt, const void*src)
+mmc_bwrite(int dev_num, lbaint_t start, lbaint_t blkcnt, const void*src)
 {
 	lbaint_t cur, blocks_todo = blkcnt;
 
@@ -369,7 +370,7 @@
 	return blkcnt;
 }
 
-static int mmc_read_blocks(struct mmc *mmc, void *dst, ulong start,
+static int mmc_read_blocks(struct mmc *mmc, void *dst, lbaint_t start,
 			   lbaint_t blkcnt)
 {
 	struct mmc_cmd cmd;
@@ -408,7 +409,7 @@
 	return blkcnt;
 }
 
-static ulong mmc_bread(int dev_num, ulong start, lbaint_t blkcnt, void *dst)
+static ulong mmc_bread(int dev_num, lbaint_t start, lbaint_t blkcnt, void *dst)
 {
 	lbaint_t cur, blocks_todo = blkcnt;
 
@@ -420,7 +421,7 @@
 		return 0;
 
 	if ((start + blkcnt) > mmc->block_dev.lba) {
-		printf("MMC: block number 0x%lx exceeds max(0x%lx)\n",
+		printf("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n",
 			start + blkcnt, mmc->block_dev.lba);
 		return 0;
 	}
diff --git a/include/ide.h b/include/ide.h
index afea85c..f691a74 100644
--- a/include/ide.h
+++ b/include/ide.h
@@ -54,8 +54,9 @@
  */
 
 void ide_init(void);
-ulong ide_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer);
-ulong ide_write(int device, ulong blknr, lbaint_t blkcnt, const void *buffer);
+ulong ide_read(int device, lbaint_t blknr, lbaint_t blkcnt, void *buffer);
+ulong ide_write(int device, lbaint_t blknr, lbaint_t blkcnt,
+		const void *buffer);
 
 #ifdef CONFIG_IDE_PREINIT
 int ide_preinit(void);
diff --git a/include/part.h b/include/part.h
index f7c7cc5..35c1c5b 100644
--- a/include/part.h
+++ b/include/part.h
@@ -43,15 +43,15 @@
 	char		product[20+1];	/* IDE Serial no, SCSI product */
 	char		revision[8+1];	/* firmware revision */
 	unsigned long	(*block_read)(int dev,
-				      unsigned long start,
+				      lbaint_t start,
 				      lbaint_t blkcnt,
 				      void *buffer);
 	unsigned long	(*block_write)(int dev,
-				       unsigned long start,
+				       lbaint_t start,
 				       lbaint_t blkcnt,
 				       const void *buffer);
 	unsigned long   (*block_erase)(int dev,
-				       unsigned long start,
+				       lbaint_t start,
 				       lbaint_t blkcnt);
 	void		*priv;		/* driver private struct pointer */
 }block_dev_desc_t;