blob: 7e38f4de89a41ec0f59407edeab572a5c6fbf62a [file] [log] [blame]
wdenk24ee89b2002-11-03 17:56:27 +00001======================================================================
Wolfgang Denk27e166b2005-12-19 13:02:45 +01002Changes since U-Boot 1.1.4:
3======================================================================
4
Wolfgang Denk92b197f2006-03-12 01:37:50 +01005* Fix Makefile: include config.mk only after CROSS_COMPILE is defined
6 Patch by Friedrich Lobenstock, 02 Jun 2005
7
Wolfgang Denk82d716f2006-03-12 01:30:45 +01008* Fix comment in common/soft_i2c.c
9 Patches by Peter Korsgaard/Tolunay Orkun, 26 May 2005
10
Wolfgang Denk611125a2006-03-12 01:23:43 +010011* Cleanup compiler warnings.
12 Patch by Greg Ungerer, 21 May 2005
13
Wolfgang Denk22814902006-03-12 01:21:19 +010014* Word alignment fixes for word aligned NS16550 UART
15 Patch by Jean-Paul Saman, 01 Mar 2005
16
17 Fixes bug with UART that only supports word aligned access: removed
18 "__attribute__ ((packed));" for "(CFG_NS16550_REG_SIZE == 4)" some
19 (broken!) versions of GCC generate byte accesses when encountering
20 the packed attribute regardless if the struct is already correctly
21 aligned for a platform. Peripherals that can only handle word
22 aligned access won't work properly when accessed with byte access.
23 The struct NS16550 is already word aligned for REG_SIZE = 4, so
24 there is no need to packed the struct in that case.
25
Wolfgang Denkd509b812006-03-12 01:13:30 +010026* Fix behaviour if gatewayip is not set
27 Patch by Robin Gilks, 23 Dec 2004
28
Wolfgang Denk84ef51a2006-03-12 00:04:20 +010029* Fix cleanup for netstart board.
30 Remove build results from repository
31
Wolfgang Denkd52fb7e2006-03-11 22:53:33 +010032* Some code cleanup for GCC 4.x
33
Wolfgang Denk4367a012006-03-11 19:15:27 +010034* Fixes to support environment in NAND flash;
35 enable NAND flash based environment for delta board.
36
Wolfgang Denk9c575e52006-03-07 00:33:28 +010037* Add support for Intel Monahans CPU on Zylonite and Delta boards
38 (This is Work in Progress!)
39
Wolfgang Denk1f62bc22006-03-07 00:32:07 +010040* Add support for TQM8260-AI boards.
41
Wolfgang Denkbfc81252006-03-06 13:03:37 +010042* Minor code cleanup
43
Wolfgang Denk4e3ccd22006-03-06 11:25:22 +010044* Merge the new NAND code (testing-NAND brach); see doc/README.nand
Bartlomiej Sieka038ccac2006-02-24 09:37:22 +010045 Rewrite of NAND code based on what is in 2.6.12 Linux kernel
46 Patch by Ladislav Michl, 29 Jun 2005
47
Stefan Roesef1ee9822006-03-04 14:57:03 +010048* Add lowboot target to mcc200 board
49 Patch by Stefan Roese, 4 Mar 2006
50
Stefan Roesef18e8742006-03-01 17:00:49 +010051* Fix problem with flash_get_size() from CFI driver update
52 Patch by Stefan Roese, 1 Mar 2006
53
Wolfgang Denk4f718662006-03-02 11:03:05 +010054* Make CFG_NO_FLASH work on ARM systems
55 Patch by Markus Klotzbuecher, 27 Feb 2006
56
Wolfgang Denk82f2e332006-02-28 18:39:20 +010057* Update mcc200 config: Disable PCI and DoC, use 133 MHz IPB clock,
58 use hush shell.
59
Stefan Roese58ad4972006-02-28 15:33:28 +010060* Convert mcc200 to use common CFI flash driver
61 Patch by Stefan Roese, 28 Feb 2006
62
Stefan Roese79b4cda2006-02-28 15:29:58 +010063* Add env-variable "unlock" to handle initial state of sectors
64 (locked/unlocked).
65
66 Only the U-Boot image and it's environment is protected,
67 all other sectors are unprotected (unlocked) if flash
68 hardware protection is used (CFG_FLASH_PROTECTION) and
69 the environment variable "unlock" is set to "yes".
70
71 Patch by Stefan Roese, 28 Feb 2006
72
73* Update drivers/cfi_flash.c:
74 - find_sector() called in both versions of flash_write_cfiword()
75 Patch by Peter Pearse, 27th Feb 2006
76
77* CFI support for a x8/x16 AMD/Spansion flash configured in x8 mode
78 Patch by Jose Maria Lopez, 16 Jan 2006
79
80* Add support for AMD/Spansion Flashes in flash_write_cfibuffer
81 Patch by Alex Bastos and Thomas Schaefer, 2005-08-29
82
83* Changes/fixes for drivers/cfi_flash.c:
84 We *should* check if there are any error bits if the previous call
85 returned ERR_OK (Otherwise we will have output an error message in
86 flash_status_check() already.) The original code would only check for
87 error bits if flash_status_check() returns ERR_TIMEOUT.
88 Patch by Marcus Hall, 23 Aug 2005
89
90* Changes/fixes for drivers/cfi_flash.c:
91 - Add CFG_FLASH_PROTECT_CLEAR on drivers/cfi_flash.c
92 - Prohibit buffer write when buffer_size is 1 on drivers/cfi_flash.c
93 Patch by Sangmoon Kim, 19 Aug 2005
94
95* Fixes for drivers/cfi_flash.c:
96 - Fix wrong timeout value usage in flash_status_check()
97 - Round write_tout up when converting to msec in flash_get_size()
98 - Remove clearing flash status at the end of flash_write_cfibuffer()
99 which sets Intel 28F640J3 flash back to command mode on CSB472
100 Patch by Tolunay Orkun, 02 July 2005
101
Heiko Schocher075866d2006-02-20 17:34:12 +0100102* Add basic support for the SMMACO4 Board from PanDaCom.
103 Patch by Heiko Schocher, 20 Feb 2006
104
Wolfgang Denk881a87e2006-02-21 17:33:04 +0100105* Add GIT version information (commid ID) to untagged U-Boot versions
106
107 As done in the linux kernel, the U-Boot version (U_BOOT_VERSION)
108 of all unreleased (untagged) U-Boot images will be automatically
109 extended upon compiletime with a part of the GIT commit ID and
110 possibly with "dirty" if uncommited changes are detected.
111
112 Here an example for the resulting version:
113 "U-Boot 1.1.4-g3457ac18-dirty"
114
115 The version is now maintained in the toplevel Makefile and the
116 version headers are autogenerated.
117
118 Patch by Stefan Roese, 9 Feb 2006
119
Wolfgang Denk84e106c2006-02-07 15:18:25 +0100120* Update default environment for INKA4x00 board.
121
Stefan Roese79830d52006-02-08 15:54:15 +0100122* Convert CPCI750 to use common CFI flash driver
123 Patch by Reinhard Arlt, 8 Feb 2006
124
Stefan Roese48a05a52006-02-07 16:51:04 +0100125* Various changes to esd HH405 board specific files
126 Patch by Matthias Fuchs, 07 Feb 2006
127
Wolfgang Denk57cac1f2006-01-29 19:12:41 +0100128* Cleanup U-Boot boot messages on ARM.
129
130 To match the U-Boot user interface on ARM platforms to the U-Boot
131 standard (as on PPC platforms), some messages with debug character
132 are removed from the default U-Boot build.
133 Enable DEBUG for lib_arm/board.c to enable debug messages.
134 New CONFIG_DISPLAY_CPUINFO and CONFIG_DISPLAY_BOARDINFO options.
135 Patch by Stefan Roese, 24 Jan 2006
136
Stefan Roese18c5e642006-01-18 20:06:44 +0100137* Fix various compiler warnings on ppc4xx builds (ELDK 4.0)
138 Patch by Stefan Roese, 18 Jan 2006
139
Stefan Roesea7b9fb92006-01-18 20:05:34 +0100140* Add VGA support (CT69000) to CPCI750 board.
141 Insert missing __le32_to_cpu() for filesize in ext2fs_read_file().
142 Patch by Reinhard Arlt, 30 Dec 2005
143
Stefan Roese2076d0a2006-01-18 20:03:15 +0100144* PMC405 and CPCI405: Moved configuration of pci resources
145 into config file.
146 PMC405 and CPCI2DP: Added firmware download and booting via pci.
147 Patch by Matthias Fuchs, 20 Dec 2005
148
Wolfgang Denkc4b465f2006-01-13 17:00:56 +0100149* Fix 28F256J3A support on PM520 board
150 (without bank-switching only 32 MB can be accessed)
151
Wolfgang Denk756ceb82006-01-11 13:04:53 +0100152* Fix mkimage bug with multifile images created on 64 bit systems.
153
Wolfgang Denkc4b465f2006-01-13 17:00:56 +0100154* Add support for 28F256J3A flash (=> 64 MB) on PM520 board
Wolfgang Denkc7428d42005-12-29 15:12:09 +0100155
Wolfgang Denk27e166b2005-12-19 13:02:45 +0100156* Fix compiler problem with at91rm9200dk board.
157 Patch by Eugen Bigz, 19 Dec 2005
158
159======================================================================
Stefan Roeseb79316f2005-08-15 12:31:23 +0200160Changes for U-Boot 1.1.4:
161======================================================================
162
Stefan Roese81a31702005-12-15 09:43:12 +0100163* Changes to Yellowstone & Yosemite 440EP/GR eval boards:
164 - Changed GPIO setup to enable another address line in order to
165 address 64M of FLASH.
166 - Added function sdram_tr1_set to auto calculate the tr1 value for
167 the DDR.
168 Patch by Steven Blakeslee, 12 Dec 2005
169
Wolfgang Denka9e642e2005-12-16 15:14:18 +0100170* MPC5200: Set PCI retry counter to 0 = infinite retry;
171 The default of 255 is too short for slow devices.
172 Patch by Martin Nykodym, 12 Dec 2005
173
Marian Balakowicz3a7b1422005-12-06 20:33:07 +0100174* Change port configuration for O2DNT (CODEC1 on PSC1).
175
Wolfgang Denk74812662005-12-12 16:06:05 +0100176* Fix register for PCI async mode on PPC440EP
177 Patch by Youngchul Bang, 08 Dec 2005
178
179* Fix U-Boot linking problems (add .eh_frame segment to linker script)
180 This segment may be required by some libgcc.a functions
181 (like _udivdi3).
182
Wolfgang Denka889bd22005-12-06 15:02:31 +0100183* Fix DPRAM offset/size for MPC8541/8555.
184 Simplify TQM85xx Makefile handling.
185
Wolfgang Denk41253be2005-12-04 11:20:57 +0100186* Fix data overflow (typo?) in rtc/ds1302.c
187
Wolfgang Denkc75eba32005-12-01 02:15:07 +0100188* Fix U-Boot compilation for MIPS boards using ELDK 4.0
189
Stefan Roesed96f41e2005-11-30 13:06:40 +0100190* Add support for TQM8541/8555 boards, TQM85xx support reworked:
191 - Support for TQM8541/8555 boards added.
192 - Complete rework of TQM8540/8560 support.
193 - Common TQM85xx code now supports all current TQM85xx platforms
194 (TQM8540/8541/8555/8560).
195 - DDR SDRAM size detection added.
196 - CAS latency default values can be overwritten by setting "serial#"
197 to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used.
198 If problems are detected with this non default CAS latency,
Wolfgang Denk4a86d772005-12-01 01:38:13 +0100199 the default values will be used instead.
200 - Flash size detection added.
Stefan Roesed96f41e2005-11-30 13:06:40 +0100201 - Moved FCC ethernet driver initialization behind TSEC driver init
202 -> TSEC is first device.
203 Patch by Stefan Roese, 30 Nov 2005
204
Stefan Roese6e7fb6e2005-11-29 18:18:21 +0100205* Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board.
206 Patch by John Otken, 23 Nov 2005
207
Stefan Roese3d9569b2005-11-27 19:36:26 +0100208* Changed PPC44x startup message (cpu info, speed...) to common style:
209 On PPC44x platforms, the startup message generated in "cpu.c" only
Wolfgang Denk4a86d772005-12-01 01:38:13 +0100210 comprised the ppc type and revision but not additional information
Stefan Roese3d9569b2005-11-27 19:36:26 +0100211 like speed etc. Those speed infos where printed in the board specific
212 code. This new implementation now prints all CPU infos in the common
213 cpu specific code. No board specific code is needed anymore and
214 therefore removed from all current 44x implementations.
215 Patch by Stefan Roese, 27 Nov 2005
216
Wolfgang Denkb6f84352005-12-01 01:17:24 +0100217* Adjust TQM834x PHY addresses for latest hardware revision.
218
Wolfgang Denkd00de232005-12-01 00:55:19 +0100219* Increase malloc arena on TQM5200 board to 256 kB.
220 With 64 kb uniform flash sector size the old value of 128 kB was
221 too small.
Wolfgang Denkf013dac2005-12-04 00:40:34 +0100222
Wolfgang Denkd00de232005-12-01 00:55:19 +0100223* Fix miiphy global data initialization (problem on 4xx boards when
224 no ethaddr is assigned). Initialization moved from
225 miiphy_register() to eth_initialize().
Marian Balakowiczd9785c12005-11-30 18:06:04 +0100226
227 Based on initial patch for 4xx platform by Matthias Fuchs.
228
Wolfgang Denkf08abe32005-11-25 16:38:03 +0100229* Remove unnnecessary #include <linux/types.h> from include/asm-*/u-boot.h
230
Wolfgang Denkaa7cfc42005-11-25 10:38:43 +0100231* Allow use of include/image.h and include/asm-*/u-boot.h in proprietary code.
232 The COPYING file was extended to make clear that these files can be
233 used in non-GPL code, too.
Wolfgang Denkf08abe32005-11-25 16:38:03 +0100234 Also, a corresponding note was placed in the headers of the affected files.
Wolfgang Denkaa7cfc42005-11-25 10:38:43 +0100235
Stefan Roese5568e612005-11-22 13:20:42 +0100236* Add support for Prodrive P3P440 board:
237 - Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c
238 - CFG_FLASH_QUIET_TEST added to use the common CFI driver
239 for bank autodetection
240 Patch by Stefan Roese, 22 Nov 2005
241
Wolfgang Denkfe126d82005-11-20 21:40:11 +0100242* Change all '$(...)' variable references into '${...}'
243 which makes the environment compatible with the hush shell.
244 WARNING: Support for the old '$(...)' syntax will be
245 discontinued in a later version.
246
Rafal Jaworowski5a164c82005-11-17 00:26:18 +0100247* Minor changes to init flags in TQM834x PCI.
248
Stefan Roese3ca37762005-11-15 16:26:34 +0100249* Fix Bamboo DDR SDRAM initialization (problem with onboard SDRAM)
250 Patch by Stefan Roese, 15 Nov 2005
251
Stefan Roesefeaedfc2005-11-15 10:35:59 +0100252* New PPC 405EP board added: CMS700
253 Added CONFIG_NET_MULTI for VOM405 board.
254 Added reset_phy() for VOM405 board.
255 Patch by Matthias Fuchs, 09 Nov 2005
256
Stefan Roeseea339202005-11-08 09:00:09 +0100257* Updated PCI mapping for esd CPCI2DP board.
258 Add support for error LED.
259 Patch by Matthias Fuchs, 07 Nov 2005
260
Stefan Roese527b5a52005-11-07 13:43:06 +0100261* Fix MPC85xx PCI support (pci_register_hose() before pci config access)
262 Patch by Stefan Roese, 07 Nov 2005
263
Stefan Roese182e1062005-11-07 09:57:57 +0100264* Correct PPC Timebase register definitions (SPRN_TBRL...)
265 Patch by Stefan Roese, 07 Nov 2005
266
Stefan Roesef190c112005-11-05 15:50:16 +0100267* Adjust bd->bi_flashstart on Yellowstone & Yosemite to correct size
268 Patch by Stefan Roese, 05 Nov 2005
269
Stefan Roeseef04a0a2005-11-03 08:31:33 +0100270* Additional fix for external IRQ config on Yellowstone & Yosemite
271 Patch by Stefan Roese, 03 Nov 2005
272
Stefan Roese57275b62005-11-01 10:08:03 +0100273* Add support for Ocotea pass 3 with 440GX Rev. F
274 Patch by Stefan Roese, 01 Nov 2005
275
Stefan Roesee1902902005-10-28 12:21:06 +0200276* Fix external IRQ configuration on Yellowstone & Yosemite
277 Patch by Stefan Roese, 28 Oct 2005
278
Marian Balakowicz99eb35d2005-10-29 14:48:59 +0200279* Add support for multiple PHYs.
Wolfgang Denkbe360d92005-10-29 23:50:20 +0200280 Tested on the following boards:
281 cmcpu2 (at91rm9200/ether.c)
282 PPChameleon (ppc4xx/4xx_enet.c)
283 yukon (mpc8220/fec.c)
284 uc100 (mpc8xx/fec.c)
285 tqm834x (mpc834x/tsec.c) with EEPRO100
286 lite5200 (mpc5xxx/fec.c) with EEPRO100 card (drivers/eepro100.c)
287 Main changes include:
288 common/miiphyutil.c
289 - miiphy_register routine was added to allow multiple PHYs to be registered
290 - miiphy_read and miiphy_write are now defined in this file, and
291 require additional argument (char *devname)
292 - other miiphy_* routines also require additional device name argument
293 ../lib_i386/board.c
294 ../lib_ppc/board.c
295 Calling reset_phy() was moved to be executed *after* eth_initialize().
296 This is necessary as now some of the implementations of reset_phy()
297 may need to use miiphy_reset() which is not allowed before eth_initialize()
298 as eth_initialize registers all required miiphy_* routines.
299 Tested on IP860 and PHY initializes properly after this change.
Marian Balakowicz99eb35d2005-10-29 14:48:59 +0200300
301* Correct includes for flat tree builder.
302
303* Fix conflicting types (flash_write()) in trab auto_update.c.
304
Rafal Jaworowski6902df52005-10-17 02:39:53 +0200305* Add PCI support for the TQM834x board.
306
Stefan Roesee9f11102005-10-20 16:40:17 +0200307* Add missing 4xx board to MAKEALL
308 Patch by Stefan Roese, 20 Oct 2005
309
Stefan Roesea5477752005-10-20 16:39:16 +0200310* Fix conflicting types (flash_write()) in esd auto_update.c
311 Patch by Stefan Roese, 20 Oct 2005
312
Stefan Roesec4c13df2005-10-20 16:36:44 +0200313* Fix problem with sleep in NetConsole (use get_timer())
314 Patch by Stefan Roese, 20 Oct 2005
315
Stefan Roese1e25f952005-10-20 16:34:28 +0200316* Add NetConsole Support for AMCC eval boards
317 Patch by Stefan Roese, 20 Oct 2005
318
Stefan Roesea93316c2005-10-18 19:17:12 +0200319* Fix NetConsole support on 4xx (only print eth link on 1st transfer)
320 Patch by Stefan Roese, 18 Oct 2005
321
Stefan Roese3b6748e2005-10-14 15:37:34 +0200322* Add fat & ext2 support to AMCC 440EP boards Yosemite & Bamboo.
Wolfgang Denk326bf402005-10-17 00:24:00 +0200323 Fix identation on ext2ls help entry.
Stefan Roese3b6748e2005-10-14 15:37:34 +0200324 Patch by Stefan Roese, 14 Oct 2005
325
Wolfgang Denk20a374f2005-10-15 18:43:50 +0200326* Add support for TQM834x boards.
327 Cleanup.
328
Wolfgang Denk77ddac92005-10-13 16:45:02 +0200329* Cleanup for GCC-4.x
330
Wolfgang Denk17a8b272005-10-13 10:41:25 +0200331* Add documentation for Open Firmware Flat Tree and usage.
332 Patch by Pantelis Antoniou, 13 Oct 2005
333
Wolfgang Denk814d98f2005-10-13 01:59:29 +0200334* Add missing files for Pantelis Antoniou's patch
335 Patch by Pantelis Antoniou, 04 Sep 2005
336
Stefan Roese4f92ac32005-10-10 17:43:58 +0200337* Fix problem in ppc4xx eth-driver without ethaddr (only without
338 CONFIG_NET_MULTI set)
339 Patch by Stefan Roese, 10 Oct 2005
340
Stefan Roesec29ab9d2005-10-08 10:19:07 +0200341* Fix gzip bmp support (test if malloc fails, warning when truncated).
342 Increase CFG_VIDEO_LOGO_MAX_SIZE on HH405 board.
343 Patch by Stefan Roese, 07 Oct 2005
344
Wolfgang Denk070610c2005-10-13 01:49:09 +0200345* Add support for OF flat tree for the STXtc board.
346 Patch by Pantelis Antoniou, 04 Sep 2005
347
Wolfgang Denkf57f70a2005-10-13 01:45:54 +0200348* Support passing of OF flat trees to the kernel.
349 Patch by Pantelis Antoniou, 04 Sep 2005
350
Wolfgang Denk3df5bea2005-10-09 01:41:48 +0200351* Cleanup
352
353* Add support for NetSilicon NS7520 processor.
354 Patch by Art Shipkowski, 12 May 2005
355
Wolfgang Denk7521af12005-10-09 01:04:33 +0200356* Add support for AP1000 board.
357 Patch by James MacAulay, 07 Oct 2005
358
Wolfgang Denk95f9dda2005-10-09 00:33:37 +0200359* Eliminate hard-coded address of Ethernet transfer buffer on at91rm9200
360 Patch by Anders Larsen, 07 Oct 2005
361
362 The Atmel errata #11 states that the transfer buffer descriptor
363 table must be aligned on a 16-word boundary. As it turned out, this
364 is insufficient - it seems the table must be aligned on a boundary
365 at least as large as the table itself (in Linux this is not an
366 issue - the table is aligned on a PAGE_SIZE (4096) boundary).
367
Wolfgang Denk47340a42005-10-09 00:25:58 +0200368* Fixed compilation for ARM when using a (standard) hard-FP toolchain
Wolfgang Denk3df5bea2005-10-09 01:41:48 +0200369 Patch by Anders Larsen, 07 Oct 2005
Wolfgang Denk47340a42005-10-09 00:25:58 +0200370
Wolfgang Denk96782c62005-10-09 00:22:48 +0200371* Cleanup warnings for cpu/arm720t & cpu/arm1136 files.
372 sed the linker scripts, rather than pre-process them.
373 Patch by Peter Pearse, 07 Oct 2005
374
Wolfgang Denk87cb6862005-10-06 17:08:18 +0200375* Update make target for ARM supported boards.
376 Use lowlevel_init() instead of platformsetup() [rename].
377 Patch by Peter Pearse, 06 Oct 2005
378
Wolfgang Denkbccae902005-10-06 01:50:50 +0200379* Fix booting from serial dataflash on AT91RM9200
380 Patch by Peter Menzebach, 29 Aug 2005
381
Wolfgang Denk6ebc7922005-10-06 01:46:57 +0200382* Add JFFS2 support for TRAB board
383 Patch by Martin Krause, 25 Aug 2005
384
Wolfgang Denk5ae31ee2005-10-06 01:43:39 +0200385* Remove unnecessary dependency of netconsole on CONFIG_NET_MULTI
386 Patch by Marcus Hall, 24 Aug 2005
387
Wolfgang Denkf5c254d2005-10-06 01:26:16 +0200388* Fix the machine-id of the Cogent csb637 board
389 Patch by Anders Larsen, 05 Oct 2005
390
Wolfgang Denk78da6072005-10-06 01:22:22 +0200391* Complete support for the KwikByte KB920x boards
392 Patch by Anders Larsen, 05 Oct 2005
393
Wolfgang Denkc0e82d52005-10-05 02:06:08 +0200394* Set the AT91RM9200 clock to asynchronous mode
395 Patch by Anders Larsen, 03 May 2005
396
Wolfgang Denk3b9dfdd2005-10-05 02:02:25 +0200397* Set the AT91RM9200 clock to synchronous mode
398 Patch by Anders Larsen, 29 Apr 2005
399
Wolfgang Denk645da512005-10-05 02:00:09 +0200400* Add support for Cogent csb637
401 Patch by Anders Larsen, 29 Apr 2005
402
Wolfgang Denkfef636b2005-10-05 01:54:04 +0200403* Fix dm9161.c initialization
404 Patch by Anders Larsen, 29 Apr 2005
405
Wolfgang Denk080bdb72005-10-05 01:51:29 +0200406* Fix problems introduced by Patch by Steven Scholz, 02 Mar 2005
407 (8e2be51de8dd03c1ce4d06cbb18ad06133d47cd5)
408
409* Move dm9161.c and lxt972.c into cpu/arm920t/at91rm9200
410 Patch by Anders Larsen, 29 Apr 2005
411
Wolfgang Denk29ca46c2005-10-05 00:25:17 +0200412* Fix device partition intialization for SystemACE disks.
413 Patch by Stephen Williams, 28 Apr 2005
414
Wolfgang Denk99b0d282005-10-05 00:19:34 +0200415* Added support for KwikByte KB920x boards (based on AT91RM9200)
416 Patch by Matt ?? <kb9200_dev@kwikbyte.com>, 27 Apr 2005
417
Wolfgang Denk45237bc2005-10-05 00:03:55 +0200418* Add support for S29GL064M-R3 flash chip on xsengine board
419 Patch by Kurt Stremerch, 18 Apr 2005
420
Wolfgang Denk7d314992005-10-05 00:00:54 +0200421* E500 update: repoint IVPR to RAM when code is relocated
422 Patch by Kylo Ginsberg, 13 Apr 2005
423
Wolfgang Denke5e98ed2005-10-04 23:38:07 +0200424* Fix loop end test in lib_generic/string.c:strswab()
425 Patch by Andrew Dyer, October 10, 2005
426 Signed-off-by: Andrew Dyer <amdyer@gmail.com>
427
Wolfgang Denk9b880bd2005-10-04 23:10:28 +0200428* Cleanup
429
430* Update ARM Integrator boards:
431 Correct addessing errors in platform files.
432 Split off common core module data from Integrator header files to
433 include/armcoremodule.h.
434 Patch by Peter Pearse, 04 Oct 2005
435
Wolfgang Denk1820d4c2005-10-04 22:38:24 +0200436* Make sure only supported compiler options are used
437 Import "cc-option" shell function from kernel and
438 use it to get the correct ARM GCC options for individual CPUs
439 Patch by Peter Pearse, 30 Jun 2005
440
Stefan Roese9a8d82f2005-10-04 15:00:30 +0200441* Fix 440GR to print correct cpu revision
Wolfgang Denk9b880bd2005-10-04 23:10:28 +0200442 Patch by Stefan Roese, 04 Oct 2005
Stefan Roese9a8d82f2005-10-04 15:00:30 +0200443
Stefan Roese93b17ec2005-10-03 15:27:50 +0200444* Change board message on AMCC Yosemite & Yellowstone to common style
Wolfgang Denk9b880bd2005-10-04 23:10:28 +0200445 Patch by Stefan Roese, 03 Oct 2005
Stefan Roese93b17ec2005-10-03 15:27:50 +0200446
Wolfgang Denkd9631ec2005-09-30 15:18:23 +0200447* Fix compiler warning
448
Wolfgang Denk709d8ec2005-09-29 12:16:38 +0200449* Fix FEC PHY addresses for TQM85xx boards
450
Wolfgang Denke98f68b2005-09-28 01:49:47 +0200451* Fix uninitialized variable problem in hush shell
452 Patch by Lars Rostock, 26 Sep 2005
453
Wolfgang Denkfb34a9a2005-09-26 23:40:37 +0200454* Undo change of f6e20fc6ca... to include/configs/trab.h
455 (Must have been an accident?)
456
Wolfgang Denkd8e7e0f2005-09-26 01:26:56 +0200457* Add support for AT91RM9200 OHCI Controller.
458 Patch by Eric Benard, 07 Apr 2005
459
Wolfgang Denk98404642005-09-26 01:18:22 +0200460* Update ARM mach-types.h
461 Patch by Eric Benard, 07 Apr 2005
462
Wolfgang Denk0e4018d2005-09-26 01:14:38 +0200463* Add support for MP2USB board.
464 Patch by Eric Benard, 07 Apr 2005
465
Wolfgang Denkc570b2f2005-09-26 01:06:33 +0200466* Add board support for armadillo HT1070
467 Patch by Rowel Atienza, 06 Apr 2005
468
Wolfgang Denkc2d0ab42005-09-26 00:53:02 +0200469* Second Ethernet address enabled for MPC885ADS and MPC8272ADS.
470 Patch by Vitaly Bordug, 30 Mar 2005
471
Wolfgang Denke6f22282005-09-26 00:44:15 +0200472* Add iopset command on mpc8xx
473 Patch by Daniel Eisenhut, 25 Mar 2005
474
Wolfgang Denka9127332005-09-26 00:39:59 +0200475* Add support for MII in eepro100 driver.
476 Patch by Gleb Natapov, 21 Mar 2005
477
Wolfgang Denkf2af3eb2005-09-26 00:29:53 +0200478* Fixes to the Lubbock (PXA 25x) support:
479 - Resolve the FIXME with respect to saving the u-boot environment.
480 - Make the default load address land in real memory.
481 - Fix lan91c96 SMC_{in,out}{b,w,l}() macros
482 Patch by David Brownell, 10 Mar 2005
483
Wolfgang Denk8e6f1a82005-09-25 18:59:36 +0200484* Add Barco Streaming Video Card (SVC) and Sample Compress Network (SCN) board
485 Patch by Marc Leeman, 04 Mar 2005
486
Wolfgang Denk49a75812005-09-25 18:41:04 +0200487* OMAP242x H4 board update
488 - fix for ES2 differences.
489 - switch to using the cfi_flash driver.
490 - fix SRAM build address.
491 - fix for GP device operation.
492 - unlock SRAM for GP devices.
493 - display more device information.
494 - fix potential deadlock in omap24xx_i2c driver.
495 - fix DLL load values to match dpllout*1 operation.
496 - fix 2nd chip select init for combo DDR device.
497 - add support for CFI Intel 28F256L18 on H4 board.
498 Patch by Richard Woodruff, 03 Mar 2005
499
Wolfgang Denk8e2be512005-09-25 17:14:20 +0200500* Fix formating in include/asm-arm/arch-at91rm9200/AT91RM9200.h
501 Patch by Steven Scholz, 02 Mar 2005
502
Wolfgang Denka188b582005-09-25 17:05:57 +0200503* Fix typo in eth.c
504 Patch by Ara Avanesyan, 24 Feb 2005
505
Wolfgang Denk31466292005-09-25 17:02:27 +0200506* Remove unneeded #include <malloc.h>
507 Patch by Ladislav Michl, 22 Feb 2005
508
Wolfgang Denkb66eb522005-09-25 16:59:36 +0200509* Add cramfs support for m68k
510 Patch by Zachary Landau, 21 Feb 2005
511
Wolfgang Denkbd516262005-09-25 16:56:15 +0200512* Update ep8260: Fix flash timeouts; improve clock resolution for faster UARTs
Wolfgang Denk716c1dc2005-09-25 18:49:35 +0200513 Patch by Jeff Angielski, 21 Feb 2005
514
Wolfgang Denk7a22cd52005-09-25 16:50:33 +0200515* Fix au1x00_serial baud rate calculation:
516 remove hardcoded cpu clock divisor and use register instead;
517 round up instead of truncate
518 Patch by Andrew Dyer, 15 Feb 2005
519
Wolfgang Denk875c7892005-09-25 16:44:21 +0200520* Add Xilinx Spartan3 family FPGA support
Wolfgang Denk7a22cd52005-09-25 16:50:33 +0200521 Patch by Kurt Stremerch, 14 Feb 2005
Wolfgang Denk875c7892005-09-25 16:44:21 +0200522
Wolfgang Denkdb421e62005-09-25 16:41:22 +0200523* Fix drivers/cfi_flash.c: use info->reset_cmd instead of FLASH_CMD_RESET
524 Patch by Zachary Landau, 11 Feb 2005
525
Wolfgang Denkc177bb52005-09-25 16:31:16 +0200526* Fix VOH405 Support
527 Patch by Matthias Fuchs, 25 Sep 2005
528
Wolfgang Denk1972dc02005-09-25 16:27:55 +0200529* Added support for PCI bridge on MPC8272ADS
530 Patch by Vitaly Bordug, Feb 09 2005
531
Wolfgang Denk0148e8c2005-09-25 16:22:14 +0200532* Update multicore CM9XX support for Integrator AP to allow booting from flash
533 Patch by Jean-Paul Saman, 8 Feb 2005
534
Wolfgang Denk389db1f2005-09-25 16:15:17 +0200535* Fix strswab() to reliably find end of string
536 Patch by Andrew Dyer, 08 Feb 2005
537
Wolfgang Denk6ed6ce62005-09-25 16:01:42 +0200538* Fix typos in include/ppc440.h
539 Patch by Andrew E Mileski, 04 Feb 2005
540
Wolfgang Denk2df741b2005-09-25 15:57:49 +0200541* Add Vibren (was Accelent) PXA255 IDP Support
542 Patch by Cliff Brake, 04 Feb 2005
543
Wolfgang Denkfd4bb672005-09-25 15:39:00 +0200544* Fix tools/bmp_logo.c using incorrect offset to pixel data
545 Patch by Andrew Dyer, 31 Jan 2005
546
Wolfgang Denk74f43042005-09-25 01:48:28 +0200547* Add ARM946E cpu and core module targets; remap memory to 0x00000000
548 Patch by Peter Pearse, 2 Feb 2005
549
Wolfgang Denke2146b62005-09-25 01:20:38 +0200550* Fix error handling in tools/env/fw_env.c
551 Patch by Ara Avanesyan, 01 Feb 2005
552
Wolfgang Denk9f221d02005-09-25 01:09:58 +0200553* Fix MGT5100 PSC baudrate calculation
554 Patch by Sebastian Schau, 27 Jan 2005
555
Wolfgang Denkc97a2aa2005-09-25 00:59:24 +0200556* OMAP242x fix for GP device booting
557 - Add SRAM unlock for GP devices.
558 - Change DDR DLL unlock value to allow DPLLout*1 operation.
559 Patches by Richard Woodruff, 21 Jan 2005:
560
Wolfgang Denk265817c2005-09-25 00:53:22 +0200561* Add support for AMD's Pb1x00 eval board;
562 add MII routines to the au1x00 ethernet driver;
563 add USB ohci driver (work in progress)
564 Patch by Thomas Sailer, 20 Jan 2005
565
Wolfgang Denkb63de2c2005-09-25 00:23:05 +0200566* Update omap5912osk board
567 Use drivers/cfi_flash.c instead of private flash driver;
568 Remove hardcoded personalized settings from omap5912osk.h;
569 Fix spacing with (RO) marks in 'flinfo' output.
570 Patch by Michael Bendzick, 14 Jan 2005
571
Wolfgang Denk3706ba12005-09-25 00:00:45 +0200572* Fix warnings for PCI code on ixp
573 Patch by Joe <lgxue@yahoo.com>, 13 Jan 2005
574
Wolfgang Denk9a9200b2005-09-24 23:41:00 +0200575* virtex2 fix for bogus download error messages
576 The virtex2 FPGA download code watches for init going active during
577 a download of config data as an error condition. init also goes
578 active after a configuration is finished in concert with the done
579 signal. So far, the code does not check for done active until all
580 of the configuration data is sent. If configuration data has a few
581 extra pad bytes at the end, this would cause an error message even
582 though the download had suceeded.
583 NOTE: virtex2 slave serial and spartan2 versions may still have the
584 same problem.
585 Patch by Andrew Dyer, 12 Jan 2005
586
Wolfgang Denkdafbe372005-09-24 23:32:48 +0200587* Optimize flash_make_cmd in drivers/cfi_flash.c for little endian
588 Fix "WARNING: flash_make_cmd: unsuppported LittleEndian mode"
589 message when probing for nonexistent flash in little endian mode.
590 As a side effect more efficient and smaller code is generated,
591 which is always a Good Thing (TM).
592 Patch by Ladislav Michl, 24 Sep 2005
593
Wolfgang Denk28cb9372005-09-24 23:25:46 +0200594* Update for TFTP using a fixed UDP port
595 Use the approved environment variable names. Added "tftpdstp" to
596 allow ports other than 69 per Tolunay Orkun's recommendation.
597 Patch by Jerry Van Baren, 12 Jan 2005
598
Wolfgang Denkecb0ccd2005-09-24 22:37:32 +0200599* Allow to force TFTP to use a fixed UDP port
600 (Add a configuration option CONFIG_TFTP_PORT and optional env
601 variable tftpport)
602 Patch by Jerry Van Baren, 10 Jan 2005
603
Wolfgang Denk4bc12f12005-09-24 22:05:40 +0200604* Fix ethernet timeouts on dbau1550 and other au1x00 systems
605 Patch by Leif Lindholm, 29 Dec 2004
606
Wolfgang Denk2b792af2005-09-24 21:54:50 +0200607* Cleanup: fix broken builds
608
609* Fix PHY address argument passing with mii info command
610 Patch by Andrew Dyer, 28 Dec 2004
611
Wolfgang Denk0c8721a2005-09-23 11:05:55 +0200612* Cleanup (PPC4xx is AMCC now)
613
Stefan Roese7644f162005-09-22 09:16:57 +0200614* esd CPCI2DP board added
615 Patch by Matthias Fuchs, 22 Sep 2005
616
Stefan Roese026cb5d2005-09-22 09:07:15 +0200617* esd PMC405 board updated
618 Patch by Matthias Fuchs, 22 Sep 2005
619
Stefan Roese98f4a3d2005-09-22 09:04:17 +0200620* Add SM501 support to HH405 board.
621 Add support for gzip compressed bmp's (CONFIG_VIDEO_BMP_GZIP).
622 Add support for eeprom write-enable (CFG_EEPROM_WREN).
623 Patch by Stefan Roese, 22 Sep 2005
624
Wolfgang Denk1caa7072005-09-22 09:34:17 +0200625* Fix autonegotiation in tsec ethernet driver
626 Patch by Stefan Roese, 21 Sep 2005
627
Wolfgang Denk8b4c9e72005-09-21 15:31:25 +0200628* Fix bug in auto_update (trab board)
629 Patch by Martin Krause, 16 Sep 2005
630
Wolfgang Denk59d80bf2005-09-21 15:24:52 +0200631* Fix computation of framebuffer palette for 8bpp LCD bitmaps
632 Patch by Francesco Mandracci, 16 Sep 2005
633
Wolfgang Denk1806c752005-09-21 10:07:56 +0200634* Update configuration for INKA4x0 board
635
Wolfgang Denk29fe1c02005-09-21 09:59:55 +0200636* Update configuration for PM854 board
637 Based on patch by R. Loeffl, 20 Jul 2005
638
Stefan Roese053b40f2005-09-15 14:41:11 +0200639* Add PCI support to TQM8540 and TQM8560 boards
640 Patch by Stefan Roese, 15 Sep 2005
641
Stefan Roese34c0a5e2005-09-15 11:34:07 +0200642* Update AMCC Yosemite to get a consistent setup for all AMCC eval
643 boards (baudrate, environment...). Flash driver fixed.
644 Patch by Stefan Roese, 15 Sep 2005
645
Stefan Roese4a3cd9e2005-09-07 16:21:12 +0200646* Fix problem in 440GP ethernet driver (ebony). Add support for 2nd
647 ethernet port on ebony.
648 Patch by Stefan Roese, 7 Sep 2005
649
Marian Balakowicz7d454772005-09-11 15:27:12 +0200650* Added support for mtddevnum and mtddevname variables (mtdparts command)
651
Wolfgang Denk670d9f12005-09-13 00:12:33 +0200652* Change default console baud rate for stxxtc board
653
Stefan Roese9d2a8732005-08-31 12:55:50 +0200654* Add I2C support to TQM8540 and TQM8560 boards (EEPROM, RTC, LM75-DTT).
Stefan Roese9d2a8732005-08-31 12:55:50 +0200655 Patch by Stefan Roese, 31 Aug 2005
656
Wolfgang Denk80e238c2005-09-03 02:22:41 +0200657* Fix default command set (don't include CFG_CMD_DISPLAY command)
658 Patch by Pantelis Antoniou, 02 Sep 2005
659
Wolfgang Denk6d51e502005-09-03 01:58:35 +0200660* Cleanup
661
Wolfgang Denk7b3e3c52005-09-03 01:23:25 +0200662* Enable SM712 driver support for HMI1001 board.
663
Wolfgang Denk77f65802005-08-31 12:30:09 +0200664* Fix problems with ld version 2.16 (dot outside sections problem)
665 Pointed out by Gerhard Jaeger, 31 Aug 2005;
666 cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html
667
668* Prepare U-Boot for gcc-4.x: fix global data pointer initialization
669
670* Adjust CS3 timings on HMI1001 board for dot matrix display under Linux
671
672* Add keyboard and dot matrix display support for HMI1001 board.
673
674* Prepare U-Boot for gcc-4.x
675
Wolfgang Denk61dada82005-08-24 12:41:18 +0200676* Fixed Bamboo port to enable running without DDR-DIMM
677 (Bamboo has also 64MB onboard DDR)
Stefan Roesea3e4fcb2005-08-24 11:21:36 +0200678 Patch by Stefan Roese, 24 Aug 2005
679
Wolfgang Denka9fe9f42005-08-23 23:04:40 +0200680* Merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.c
681 now handling all 4xx cpu's
682 Patch by Stefan Roese, 16 Aug 2005
683
Wolfgang Denk2ac47852005-08-23 22:29:44 +0200684* Fix make dependencies for at91rm9200 and ks8695 cpus
685 Patch by Steven Scholz, 23 Aug 2005
686
Wolfgang Denkd534f5c2005-08-23 22:27:41 +0200687* Add JFFS2 support for TQM5200 board
688
Stefan Roese5e4b3362005-08-22 17:51:53 +0200689* Add esd cpci5200 and pf5200 boards
690 Patch by Reinhard Arlt, 22 Aug 2005
691
Wolfgang Denk94085692005-08-19 00:55:12 +0200692* Fix sysclock for TQM8540 and TQM8560 boards
693 Patch by Martin Krause, 25 Jul 2005
694
Wolfgang Denkc7db9a32005-08-19 00:53:02 +0200695* Initialize serial# and ethaddr from manufacturer data in EEPROM on CMC-PU2
696 Patch by Martin Krause, 08 Jun 2005
697
Wolfgang Denk6617aae2005-08-19 00:46:54 +0200698* Add new board specific commands for TQM5200/STK52XX
699 - Sound commands (beep, wav, sound)
700 - Test commands (led, can, backlight, rs232)
701 Patch by Martin Krause, 02 May 2005
702
703* Change main clock on CMC-PU2 board from 207 MHz to 179 MHz
Wolfgang Denkdf3c7c82005-08-19 00:36:45 +0200704 because of a bug in the AT91RM9200 CPU PLL
705 Patch by Martin Krause, 22 Apr 2005
706
Wolfgang Denk601aed12005-08-19 00:08:55 +0200707* Add automatic HW detection for another CMC_PU2 variant
708 Patch by Martin Krause, 20 Apr 2005
709
Wolfgang Denkdbc58192005-08-18 12:21:16 +0200710* Remove CONFIG_AT91RM9200DK in CMC-PU2 configuration
711 Patch by Martin Krause, 19 Apr 2005
712
Wolfgang Denke8aa8242005-08-18 11:55:22 +0200713* Fix initialization problem on TQM5200 without SM501
Wolfgang Denk601aed12005-08-19 00:08:55 +0200714 Patch by Martin Krause, 08 Apr 2005
Wolfgang Denke8aa8242005-08-18 11:55:22 +0200715
Wolfgang Denk4f562f12005-08-18 11:51:12 +0200716* Add RTC support for STK52XX.200
Wolfgang Denk601aed12005-08-19 00:08:55 +0200717 Patch by Martin Krause, 07 Apr 2005
Wolfgang Denk4f562f12005-08-18 11:51:12 +0200718
Wolfgang Denkdf04a3d2005-08-18 01:22:22 +0200719* Add support for IFM o2dnt board
720
Wolfgang Denk98128f32005-08-16 15:17:53 +0200721* Enable PCI on hmi1001 board
722
Wolfgang Denk87b8bd52005-08-16 09:32:45 +0200723* Fix return values of the jffs2 commands ls/fsload/fsinfo,
724 so we can use them to, e.g., check the existence of a file with
725 "if ls foo; then this; else that; fi" in the hush shell
726 Patch by Andreas Engel, 16 August 2005
727
Wolfgang Denk3d078ce2005-08-15 16:03:56 +0200728* Coding style cleanup
729
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200730* Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board.
731 Patch by Dan Malek and Pantelis Antoniou, 15 Aug 2005
732
Stefan Roeseb79316f2005-08-15 12:31:23 +0200733* Check return value of malloc in 440gx_enet.c
734 Patch by Travis B. Sawyer, 18 Jul 2005
735
736* Add Sandburst Metrobox and Sandburst Karef board support packages.
737 Second serial port on 440GX now defined as a system device.
738 Add 'Short Etch' code for Cicada PHY within 440gx_enet.c
739 Patch by Travis B. Sawyer, 12 Jul 2005
740
741======================================================================
wdenka1191902005-01-09 17:12:27 +0000742Changes for U-Boot 1.1.3:
743======================================================================
744
Wolfgang Denkb2f50802005-08-12 23:43:12 +0200745* Minor code cleanup
746
Wolfgang Denk50814842005-08-12 23:36:08 +0200747* Add forgotten new fils from latest VoiceBlue update
748
Wolfgang Denk396387a2005-08-12 23:34:51 +0200749* Make bootretry feature work with hush shell.
750 Caveat: this currently *requires* CONFIG_RESET_TO_RETRY to be set, too.
751 Patch by Andreas Engel, 19 Jul 2005
752
Wolfgang Denkd992daf2005-08-12 23:27:18 +0200753* Update Hymod Board Database PHP code in "tools" directory
754 Patch by Murray Jensen, 01 Jul 2005
755
Wolfgang Denkf9d77ed2005-08-12 23:23:46 +0200756* Make "tr" command use POSIX compliant; export HOSTOS make variable
757 Patch by Murray Jensen, 30 Jun 2005
758
Wolfgang Denkb3b0fd52005-08-12 23:20:59 +0200759* Fix Murray Jensen's mail address.
760 Patch by Murray Jensen, 30 Jun 2005
761
Wolfgang Denkf89920c2005-08-12 23:15:53 +0200762* Preserve PHY_BMCR during a soft reset.
763 Patch by Carl Riechers, 24 Jun 2005
764
Wolfgang Denke5445282005-08-12 22:56:51 +0200765* VoiceBlue update: eeprom tool can also store firmware version now.
766 eeprom.bin is runable by jumping at load address.
767 Patch by Ladislav Michl, 23 May 2005
768
Wolfgang Denkea99a732005-08-12 22:38:37 +0200769* Move the AT91RM9200DK to the ARM Systems list.
770 Patch by Anders Larsen, 26 Apr 2005
Wolfgang Denkb2f50802005-08-12 23:43:12 +0200771
Wolfgang Denk8d4ba3d2005-08-12 22:35:59 +0200772* Eliminate calls of ARM libgcc.a helper functions _divsi3 and _modsi3
773 Patch by Anders Larsen, 26 Apr 2005
774
Wolfgang Denk4d302d62005-08-12 22:32:29 +0200775* measure_gclk() is needed when DEBUG is enabled
776 Patch by Bryan O'Donoghue, 25 Apr 2005
777
Stefan Roese8534bf92005-08-12 20:06:52 +0200778* Add UPD-Checksum code, fix problem in net.c (return instead of break)
779 Patch by Reinhard Arlt, 12 Aug 2005
780
Stefan Roese5315dfa2005-08-12 16:56:56 +0200781* esd PCI405 board updated
782 Patch by Matthias Fuchs, 28 Jul 2005
783
Stefan Roese82f4c6a2005-08-12 16:52:47 +0200784* esd WUH405 and DU405 board updated
785 Patch by Matthias Fuchs, 27 Jul 2005
786
Stefan Roese9bcf2ab2005-08-12 16:46:35 +0200787* Fix problem in cmd_nand.c (only when defined CFG_NAND_SKIP_BAD_DOT_I)
788 Patch by Matthias Fuchs, 4 May 2005
789
Stefan Roese84286382005-08-11 18:03:14 +0200790* Update AMCC Yosemite to get a consistent setup for all AMCC eval
791 boards (baudrate, environment...). Flash driver fixed.
792 Patch by Stefan Roese, 11 Aug 2005
793
Stefan Roese9e005892005-08-11 17:58:40 +0200794* Changed AMCC Bubinga (405EP) configuration to support 2nd eth port
795 Patch by Stefan Roese, 11 Aug 2005
796
Stefan Roesec57c7982005-08-11 17:56:56 +0200797* Add NAND FLASH support for AMCC Bamboo 440EP eval board
798 Patch by Stefan Roese, 11 Aug 2005
799
Wolfgang Denk8f79e4c2005-08-10 15:14:32 +0200800* Add configuration for IFM AEV FIFO board.
801 Minor coding style cleanup.
802
803* Add configuration for IFM SPI eval board
804
Wolfgang Denk9d3338d2005-08-10 10:06:25 +0200805* Fix CompactFlash problem on HMI1001 board
806
Wolfgang Denkc4e0e682005-08-09 21:41:20 +0200807* Make new "mtdparts" code build with older compilers
808 Patch by Andrea Scian, 09 Aug 2005
809
Stefan Roese846b0dd2005-08-08 12:42:22 +0200810* Changed CONFIG_440_GX, CONFIG_440_EP and CONFIG_440_GR options to
811 CONFIG_44GX, CONFIG_440EP and CONFIG_440GR for a consistent design
812 with the 405 defines and the linux kernel defines.
813 Patch by Stefan Roese, 08 Aug 2005
814
Wolfgang Denkc19c3132005-08-09 17:25:22 +0200815* Fix compiler warnings with older GCC versions
816
Wolfgang Denk700a0c62005-08-08 01:03:24 +0200817* Add common (with Linux) MTD partition scheme and "mtdparts" command
818
819 Old, obsolete and duplicated code was cleaned up and replace by the
820 new partitioning method. There are two possible approaches now:
821
822 The first one is to define a single, static partition:
823
824 #undef CONFIG_JFFS2_CMDLINE
825 #define CONFIG_JFFS2_DEV "nor0"
826 #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF /* use whole device */
827 #define CONFIG_JFFS2_PART_SIZE 0x00100000 /* use 1MB */
828 #define CONFIG_JFFS2_PART_OFFSET 0x00000000
829
830 The second method uses the mtdparts command line option and dynamic
831 partitioning:
832
833 /* mtdparts command line support */
834 #define CONFIG_JFFS2_CMDLINE
835 #define MTDIDS_DEFAULT "nor1=zuma-1,nor2=zuma-2"
836 #define MTDPARTS_DEFAULT "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)"
837
838 Command line of course produces bigger images, and may be inappropriate
839 for some targets, so by default it's off.
840
Wolfgang Denk452e8e72005-08-08 00:47:14 +0200841* Fix build problems for PM856 Board
842
Wolfgang Denk8b019da2005-08-08 00:14:41 +0200843* Fix sign extension bug in 'fpga loadb' command;
844 make 'fpga loadb' always print the file header info
845 Patch by Andrew Dyer, 11 Jan 2005
846
Wolfgang Denkfe599e12005-08-07 23:55:50 +0200847* Fix errors that occur when accessing SystemACE CF
848 Patch by Jeff Angielski, 09 Jan 2005
Stefan Roese846b0dd2005-08-08 12:42:22 +0200849
Wolfgang Denk7ebdb192005-08-06 02:11:33 +0200850* Document switching between U-Boot and PlanetCore on RPXlite
851 by Sam Song, 24 Dec 2004
852
Wolfgang Denkd980a162005-08-06 02:03:03 +0200853* Fix PowerQUICC II mask detection.
854 Patch by Eugene Surovegin, 20 Dec 2004
Stefan Roese846b0dd2005-08-08 12:42:22 +0200855
Wolfgang Denkd06a5f72005-08-06 01:56:59 +0200856* Add support for Altera NIOS DK1C20 board
857 Patch by Shlomo Kut, 13 Dec 2004
858
Wolfgang Denkf901a832005-08-06 01:42:58 +0200859* Add support for ep8248 board
860 Patch by Yuli Barcohen, 12 Dec 2004
861
862 Minor code cleanup.
863
Wolfgang Denk56337962005-08-06 01:21:19 +0200864* Fix baudrate setting for KGDB on MPC8260
865 Patch by HoJin, 11 Dec 2004
866
Wolfgang Denk5ad73a82005-08-06 01:13:19 +0200867* Fix 'mii help' text formatting
868 Patch by Cory Tusar, 10 Dec 2004
Wolfgang Denkf901a832005-08-06 01:42:58 +0200869
Wolfgang Denk23a7a322005-08-06 01:11:12 +0200870* Fix return code of NFS command
871 Patch by Hiroshi Ito, 11 Dec 2004
872
Wolfgang Denk38362212005-08-06 01:02:27 +0200873* Fix typo
874
Wolfgang Denkc04a76e2005-08-06 00:11:50 +0200875* Fix compiler warnings in cpu/ppc4xx/usbdev.c
876 Patch by Steven Blakeslee, 04 Aug 2005
877
Stefan Roese17f50f22005-08-04 17:09:16 +0200878* Add support for AMCC Bamboo PPC440EP eval board
879 Patch by Stefan Roese, 04 Aug 2005
880
Jon Loeligerde1d0a62005-08-01 13:20:47 -0500881* Patch by Jon Loeliger
882 Fix style issues primarily in 85xx and 83xx boards.
883 - C++ comments
884 - Trailing white space
885 - Indentation not by TAB
886 - Excessive amount of empty lines
887 - Trailing empty lines
888
Wolfgang Denkb4f15fd2005-08-05 20:03:38 +0200889* Patch by Ron Alder, 11 Jul 2005
Lunsheng Wangb0e32942005-07-29 10:20:29 -0500890 Add Xianghua Xiao and Lunsheng Wang's support for the
891 GDA MPC8540 EVAL board.
892
Eran Libertyf046ccd2005-07-28 10:08:46 -0500893* Patch by Eran Liberty
894 Add support for the Freescale MPC8349ADS board.
895
Wolfgang Denkb4f15fd2005-08-05 20:03:38 +0200896* Patch by Jon Loeliger, 25 Jul 2005
Jon Loeliger63be1112005-07-25 15:38:06 -0500897 Move the TSEC driver out of cpu/mpc85xx as it will be shared
898 by the upcoming mpc83xx family as well.
899
Wolfgang Denkb4f15fd2005-08-05 20:03:38 +0200900* Patch by Jon Loeliger, 05 May 2005
Jon Loeligerd9b94f22005-07-25 14:05:07 -0500901 Implemented support for MPC8548CDS board.
902 Added DDR II support based on SPD values for MPC85xx boards.
903 This roll-up patch also includes bugfies for the previously
904 published patches:
905 DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
906
Wolfgang Denkb4f15fd2005-08-05 20:03:38 +0200907* Patch by Jon Loeliger, 10 Feb 2005
Jon Loeliger288693a2005-07-25 12:14:54 -0500908 Add config option CONFIG_HAS_FEC calling out 8540 FEC features.
909
Wolfgang Denkb4f15fd2005-08-05 20:03:38 +0200910* Patch by Jon Loeliger, Kumar Gala, 08 Feb 2005
Jon Loeliger7202d432005-07-25 11:13:26 -0500911 For MPC85xxCDS:
912 Adds Relaxed Timing TRLX bit to FLASH ORx regs to allow
913 for faster flash parts.
914 Add documentation for BR/OR for FLASH.
915
Wolfgang Denkb4f15fd2005-08-05 20:03:38 +0200916* Patch by Jon Loeliger 08 Feb 2005
Jon Loeligerd65cfe82005-07-25 10:58:39 -0500917 Determine L2 Cache size dynamically on 85XX boards.
918
Wolfgang Denkb4f15fd2005-08-05 20:03:38 +0200919* Patch by Jon Loeliger, Kumar Gala 08 Feb 2005
Jon Loeliger9c4c5ae2005-07-23 10:37:35 -0500920 - Convert the CPM2 based functionality to use new CONFIG_CPM2
921 option rather than a myriad of CONFIG_MPC8560-like variants.
922 Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560.
923 Eliminates the CONFIG_MPC8560 option entirely. Distributes the
924 new CONFIG_CPM2 option to each 8260 board.
wdenka1191902005-01-09 17:12:27 +0000925
Wolfgang Denkb20d0032005-08-05 12:19:30 +0200926* Add support for MicroSys PM856 board
927 Patch by Josef Wagner, 03 Aug 2005
928
Wolfgang Denk992b4022005-08-05 11:47:10 +0200929* Minor fixes to PM854 board
930 Patch by Josef Wagner, 03 Aug 2005
931
Wolfgang Denk452f6742005-08-04 19:45:01 +0200932* Adjust configuration of XENIAX board
933 (chip select and GPIO required for USB operation)
934
Wolfgang Denk3e0bc442005-08-04 01:24:19 +0200935* Fix typos in cpu/85xx/start.S which caused DataTLB exception to be
936 routed to the Watchdog handler
937 Patch by Eugene Surovegin, 18 Jun 2005
938
Wolfgang Denkb20d0032005-08-05 12:19:30 +0200939* (re)enabled scsi commands do_scsi() and do_scsiboot()
Wolfgang Denk460c3222005-08-04 01:14:12 +0200940 Patch by Denis Peter, 06 Dec 2004
941
Wolfgang Denkc43352c2005-08-04 01:09:44 +0200942* Fix endianess problem in TFTP / NFS default filenames
943 Patch by Hiroshi Ito, 06 Dec 2004
944
Wolfgang Denk6dfa4342005-08-03 23:03:54 +0200945* Ignore broadcast status bit in received frames in 8260 FCC ethernet
946 loopback test code
947 Patch by Murray Jensen, 18 Jul 2005
948
Wolfgang Denk507d3b02005-08-03 22:58:55 +0200949* Fix typo in mkconfig script (used == instead of =)
950 Patch by Murray Jensen, 18 Jul 2005
951
Wolfgang Denkdc17fb62005-08-03 22:32:02 +0200952* Cleanup build problems on 64 bit build hosts
953
Wolfgang Denkd3b86c42005-08-03 10:01:54 +0200954* Update MAINTAINERS file
955
Stefan Roese8a316c92005-08-01 16:49:12 +0200956* Patch by Stefan Roese, 01 Aug 2005:
957 - Major cleanup for AMCC eval boards Walnut, Bubinga, Ebony, Ocotea
958 (former IBM eval board). Please see "doc/README.AMCC-eval-boards-cleanup"
959 for details.
960 - Sycamore (PPC405GPr) eval board added (Walnut port is extended
961 to run on both 405GP and 405GPr eval boards).
962
963* Patch by Steven Blakeslee, 27 Jul 2005:
964 - Add support for AMCC PPC440EP/GR.
965 - Add support for AMCC Yosemite PPC440EP eval board.
966 - Add support for AMCC Yellowstone PPC440GR eval board.
967
Wolfgang Denk0f18cb62005-07-31 00:30:09 +0200968* Minor fixes for PPChameleon Board:
969 - fix alignment of NAND size
970 - make code do what the comment says
971
Wolfgang Denkcf991922005-07-30 16:45:16 +0200972* Implement h/w sector protection status synchronization at boot.
973 The code is provided for, and was tested on, the Yukon/Alaska
974 and PM520 boards only.
975
976 A bug in flash_real_protect() for the Yukon board was fixed by
977 adding a function that tells if two banks are on one flash chip.
978
Wolfgang Denk15f36a52005-07-28 10:42:26 +0200979* Fix sysmon POST problem: check I2C error codes
980 This fixes a problem of displaying bogus voltages when the voltages
981 are so low that the I2C devices start failing while the rest of the
982 system keeps running.
983
Wolfgang Denke82bc622005-07-28 01:50:14 +0200984* Patch by Cedric Vincent, 6 Jul 2005:
985 Fix CFG_CMD_SETGETDCR handling in "common/cmd_dcr.c"
986
Wolfgang Denk2d5df632005-07-21 16:14:36 +0200987* Patch by Jon Loeliger, 20 Jul 2005:
988 Add missing PCI IO port definitions.
989
Wolfgang Denk08abe152005-07-21 15:23:29 +0200990* Add CompactFlash support for HMI1001 board.
991
992* Adjust printed board ID for LWMON board.
993
Wolfgang Denk1a794732005-07-21 15:29:22 +0200994* Fix low-level OHCI transfers for ARM920t and MPC5xxx
995
Wolfgang Denkf5301872005-07-21 11:45:50 +0200996* Add new argument format for flash commands to allow for usage like
997 "erase $(addr) +$(filesize)", i. e. a size argument can be used and
998 U-Boot will automaticially find the end of the corresponding sector.
999
stroesecd5b2b92005-07-05 11:35:27 +00001000* Patch by Stefan Roese, 5 Jul 2005:
1001 Update uc100 board PHY setup
1002
stroese3c71f3e2005-07-01 15:53:57 +00001003* Patch by Stefan Roese, 1 Jul 2005:
1004 Fix PHY address for CATcenter board (now correct!)
1005
stroesebf418862005-06-30 13:06:07 +00001006* Patch by Stefan Roese, 30 Jun 2005:
1007 Fix PHY addresses for PPChameleon and CATcenter boards
1008 Change MAINTAINER for most esd boards
1009
wdenk88804d12005-07-04 00:03:16 +00001010* Patch by Detlev Zundel, 30 Jun 2005:
1011 Fix LCD logo for lwmon board which got lost in the merge of 8xx and PXA LCD code
1012
wdenk342717f2005-06-27 13:30:03 +00001013* Fix baudrate calculation problem on MPC5200 systems
1014
1015* Add EEPROM and RTC support for HMI1001 board
1016
1017* Patch by Detlev Zundel, 20 Jun 2005:
1018 Fix initialization of low active GPIO pins on inka4x0 board
1019
wdenk024447b2005-06-20 10:28:38 +00001020* Enable redundant environment, disable HW flash protection of
1021 HMI1001 board
1022
wdenkb2532ef2005-06-20 10:17:34 +00001023* Patch by Travis Sawyer, 10 Jun 2005:
1024 Initialize allocated dev and private hw structures
1025 after their respective allocation in 440gx_enet.c
1026
1027* Patch by Steven Scholz, 10 Jun 2005:
1028 Fix byteorder problems with second argument of "bootm" with
1029 standalone images;
1030
wdenka87589d2005-06-10 10:00:19 +00001031* Add support for HMI1001 board
1032
1033* Disable "date" and "sntp" commands on TQM866M
1034
wdenk51152c12005-06-05 20:30:43 +00001035* Fix watchdog reset problems on LWMON board
1036
wdenkba91e262005-05-30 23:55:42 +00001037* Patch by Juergen Selent, 17 May 2005:
1038 Add support for Funkwerk VoVPN gateway module.
1039
1040* Cleanup debug code for MPC8220 FEC driver
1041
wdenk2eab48f2005-05-23 10:49:50 +00001042* Extend burst mode RAM test program to take a loop count
1043 (0 = infinite)
1044
1045* Use CONFIG_DRIVER_KS8695ETH to enable KS8695 ethernet driver on
1046 those boards that use it.
1047
wdenk3a574cb2005-05-19 22:39:42 +00001048* Patches by Greg Ungerer, 19 May 2005:
1049 - add support for the KS8695P (ARM 922 based) CPU
1050 - add support for the OpenGear CM4008, CM4116 and CM4148 boards
1051
1052* Patch by Steven Scholz, 19 May 2005:
1053 Add support for CONFIG_SERIAL_TAG on ARM boards
1054
wdenk7680c142005-05-16 15:23:22 +00001055* Add PCI support for Sorcery board.
1056 Code cleanup (especially Sorcery / Alaska / Yukon serial driver).
1057
wdenkc0176632005-05-16 14:19:49 +00001058* Fix compile problems caused by new burst mode SDRAM test;
1059 make port pins to trigger logic analyzer configurable
1060
wdenk343117b2005-05-13 22:49:36 +00001061* Fix timer handling on MPC85xx systems
1062
wdenk9dd41a72005-05-12 22:48:09 +00001063* Fix debug code in omap5912osk flash driver
1064
1065* Add support for MPC8247 based "IDS8247" board.
1066
wdenkd44e14b2005-05-10 15:51:35 +00001067* Add support for 2 x TSEC interfaces on the TQM8540 board.
1068
wdenked16fef2005-05-09 10:17:32 +00001069* On LWMON we must use the watchdog to reset the board as the CPU
1070 genereated HRESET pulse is too short to reset the external
1071 circuitry.
1072
wdenk931da932005-05-07 19:06:32 +00001073* Add test tool to exercise SDRAM accesses in burst mode
1074 (as standalone program, MPC8xx/PowerPC only)
1075
wdenk60fc6cb2005-05-05 09:13:21 +00001076* Increase CFG_MONITOR_LEN for Rattler board to match actual code
1077 size.
1078
wdenk07cc0992005-05-05 00:04:14 +00001079* Major upate of JFFS2 code; now in sync with snapshot of MTD CVS of
wdenk412babe2005-05-05 09:51:44 +00001080 March 13, 2005); new configuration option CONFIG_JFFS2_LZO_LZARI
1081 added to support LZO and LZARI compression modes (undefined by
1082 default).
wdenk07cc0992005-05-05 00:04:14 +00001083
wdenkcf8bc572005-05-04 23:50:54 +00001084* Fix problem with symbolic links in JFFS2 code.
1085
wdenka710d4b2005-05-04 23:44:59 +00001086* Use linker ASSERT statement to prevent undetected overlapping of
1087 sections on PPChameleon board; other boards might use this, too.
1088
stroese434cf852005-05-03 06:19:57 +00001089* Patch by Stefan Roese, 03 May 2005:
1090 Update for P3G4
1091 Fix problems in cmd_universe.c
1092
1093* Patch by Matthias Fuchs, 03 May 2005:
1094 Added missing variable declaration in cmd_nand.c
1095 Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram
1096
wdenk9f709b62005-04-22 15:09:09 +00001097* Fix INKA4x0: use CS1 as gpio_wkup_6 output
1098
wdenka6310922005-04-21 21:10:22 +00001099* Fix bug in the SDRAM initialization code for canmb, IceCube and
1100 PM520 boards.
1101 Fix PHY address for canmb board.
1102
wdenk7cc14382005-04-20 14:38:59 +00001103* Cleanup serial console baudrate calculation on AT91RM9200;
1104 get rid of obsolete CFG_AT91C_BRGR_DIVISOR definition
wdenkec0ca732005-04-20 12:36:05 +00001105
stroesefddae7b2005-04-20 06:52:40 +00001106* Patch by Matthias Fuchs, 18 Apr 2005:
1107 Make PCI target address spaces on PMC405 and CPCI405 boards
1108 configurable via environment variables
1109
wdenkb2323ea2005-04-20 09:28:54 +00001110* Auto-size RAM on canmb board.
1111
wdenk5e5f9ed2005-04-13 23:15:10 +00001112* Add support for canmb board
1113
stroese4c2a3662005-04-13 10:08:39 +00001114* Patch by Stefan Roese, 13 Apr 2005:
1115 Update for esd apc405
1116
wdenk2a8af182005-04-13 10:02:42 +00001117* Fixes for TQM8560 board:
1118 - fix clock rates
1119 - remove debug messages
1120 - fix flash sector protection
1121
wdenkb77fad32005-04-07 22:36:40 +00001122* Patch by Steven Scholz, 07 Apr 2005:
1123 Add i2c_reg_write() and i2c_reg_write() for at91rm9200 I2C
1124
wdenk2a8af182005-04-13 10:02:42 +00001125* Patches by Steven Scholz, 07 Apr 2005:
wdenkb77fad32005-04-07 22:36:40 +00001126 Fix compiler warning in altera.c
wdenk2a8af182005-04-13 10:02:42 +00001127 Fix warning in cpu/arm920t/at91rm9200/i2c.c
wdenkb77fad32005-04-07 22:36:40 +00001128
1129* Patch by Ladislav Michl, 06 Apr 2005:
1130 Fix voiceblue configuration.
1131
stroese7ec25502005-04-07 05:35:12 +00001132* Patch by Stefan Roese, 06 Apr 2005:
1133 Updates for OCOTEA board:
1134 - Changed U-Boot size from 512kByte to 256kByte
1135 - Fixed flash driver to support boot from soldered user flash
1136 - Added README for switch from PIBS firmware to U-Boot
1137
1138* Patch by Travis Sawyer, 05 Apr 2005:
1139 - Change timer frequency for ppc 440 from 10 ms to 1 ms.
1140 Problem found by Andrew Wozniak.
1141
wdenka85f9f22005-04-06 13:52:31 +00001142* Patch by Steven Scholz, 06 Apr 2005:
1143 - creating SoC subdir for Atmel AT91RM9200 cpu/arm920t/at91rm9200
1144 - moving code out of cpu/at91rm9200 into cpu/arm920t/at91rm9200
1145
wdenk20787e22005-04-06 00:04:16 +00001146* Patches by Robert Whaley, 29 Nov 2004:
1147 - update the pxa-regs.h file for PXA27x chips
1148 - add PXA27x based ADSVIX board
1149 - add support for MMC on PXA27x processors
1150
1151* Patch by Andrew E. Mileski, 28 Nov 2004:
1152 Fix PPC4xx SPD SDRAM detection bug
1153
1154* Patch by Hiroshi Ito, 26 Nov 2004:
1155 Fix logic of "test -z" and "test -n" commands
1156
wdenk3c2b3d42005-04-05 23:32:21 +00001157* Patch by Ladislav Michl, 05 Apr 2005:
1158 Add support for VoiceBlue board.
1159
1160* Patch by Ladislav Michl, 05 Apr 2005:
1161 Fix netboot_common() prototypes.
1162
wdenkb304c962005-04-05 22:30:50 +00001163* Patch by Steven Scholz, 05 Apr 2005:
1164 Use i.MX watchdog timer for reset_cpu()
1165
1166* Patch by Steven Scholz, 05 Apr 2005:
1167 Move reset_cpu() out of cpu/arm920t/start.S into the SoC specific
1168 subdirectories cpu/arm920t/imx/ and cpu/arm920t/s3c24x0/
1169 (now in interupts.c)
1170
wdenk12b43d52005-04-05 21:57:18 +00001171* Add support for MPC8220 based "sorcery" board.
1172
1173* Add support for TQM8560 board.
wdenkf5c5ef42005-04-05 16:26:47 +00001174
wdenk3dd7f0f2005-04-04 23:43:44 +00001175* Add FEC support for TQM8540 board.
1176 Interfaces are named as follows: "ENET1" - TSEC2, "ENET2" - FEC
1177
1178* Patch by Martin Krause, 04 Apr 2005:
1179 Update default configuration for CMC_PU2 board.
1180
wdenkba83a302005-04-04 12:23:03 +00001181* Patch by Steven Scholz, 04 Apr 2005:
wdenk8aa1a2d2005-04-04 12:44:11 +00001182 - remove all references to CONFIG_INIT_CRITICAL for ARM based boards
1183 - introduce two new configuration options instead:
1184 CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT
1185
1186* Patch by Steven Scholz, 04 Apr 2005:
wdenkba83a302005-04-04 12:23:03 +00001187 Make sure that MDIO clock does not exceed 2.5 MHz on AT91
1188
wdenk101e8df2005-04-04 12:08:28 +00001189* Fix timer code for ARM systems: make sure that udelay() does not
1190 reset timers so it's save to use udelay() in timeout code.
1191
wdenk50712ba2005-04-03 23:35:57 +00001192* Patch by Mathias Küster, 23 Nov 2004:
1193 add udelay support for the mcf5282 cpu
1194
1195* Patch by Tolunay Orkun, 16 November 2004:
1196 fix incorrect onboard Xilinx CPLD base address
wdenk3c2b3d42005-04-05 23:32:21 +00001197
wdenk901787d2005-04-03 23:22:21 +00001198* Patch by Jerry Van Baren, 08 Nov 2004:
1199 - Add low-boot option for MPC8260ADS board (if lowboot is selected,
1200 the jumper for the HRCW source should select flash. If lowboot is
1201 not selected, the jumper for the HRCW source should select the
1202 BCSR.
1203 - change default load base address to 0x00400000
1204
wdenk8b0bfc62005-04-03 23:11:38 +00001205* Patch by Yuli Barcohen, 08 Nov 2004:
1206 Add support for Analogue & Micro Rattler boards.
1207 Tested on Rattler8248.
1208
1209* Patch by Andre Renaud, 08 Nov 2004:
1210 Fix watchdog support in common/lcd.c
1211
1212* Patch by Marc Leeman, 05 Nov 2003:
1213 Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU
1214 bug only affects the XPC8245 processors
1215
wdenk384cc682005-04-03 22:35:21 +00001216* Patches by Josef Wagner, 29 Oct 2004:
1217 - Add support for MicroSys CPU87 board
1218 - Add support for MicroSys PM854 board
1219
1220* Patch by Jian Zhang, 02 Nov 2004:
1221 Add 16-bit NAND support
1222
wdenkc1a11c12005-04-03 21:11:16 +00001223* Patch by Scott McNutt, 01 Nov 2004:
1224 Add missing NIOS/NIOS2 support for "iminfo" command
1225
1226* Patch by Detlev Zundel, 29 Oct 2004:
1227 Add missing NIOS/NIOS2 support for "mkimage" tool.
1228
wdenk63153492005-04-03 20:55:38 +00001229* Patch by David Adair, 27 Oct 2004:
1230 Add missing 440GX SDRAM Controller reset
1231
wdenk3ec924a2005-04-03 17:23:39 +00001232* Patch by Steven Scholz, 25 Oct 2004:
1233 Declare reset_cpu() in include/common.h instead locally
1234
wdenk756f5862005-04-03 15:51:42 +00001235* Patch by Yusdi Santoso, 22 Oct 2004:
1236 - Add support for HIDDEN_DRAGON board
1237 - fix endianess problem in driver/rtl1839.c
1238
1239* Patch by Allen Curtis, 21 Oct 2004:
1240 support multiple serial ports
1241
wdenkb1bf6f22005-04-03 14:52:59 +00001242* Patch by Richard Klingler, 03 Apr 2005:
1243 Add call to eth_halt() in net/net.c when called functions fail
1244 after eth_init() has been called.
1245
1246* Patch by Sam Song, 3 April 2005:
1247 - Update README.Netconsole
1248 - Update README
1249
wdenk400558b2005-04-02 23:52:25 +00001250* Prepare for SoC rework of ARM code:
1251 - rename CONFIG_BOOTBINFUNC into CONFIG_INIT_CRITICAL
1252 - rename memsetup into lowlevel_init (function name and source files)
wdenk86c98882005-04-03 14:26:46 +00001253 Patch by Steven Scholz, 03 Apr 2005:
1254 - create SoC specific directories include/asm-arm/arch-imx and
1255 include/asm-arm/arch-s3c24x0
wdenk400558b2005-04-02 23:52:25 +00001256
wdenk414eec32005-04-02 22:37:54 +00001257* Fix problems with SNTP support;
1258 enable SNTP support in some boards.
1259
wdenkbe6b6e42005-04-01 15:18:44 +00001260* Patches by Martin Krause, 01 Apr 2005:
1261 - Fix flash erase timeout on CMC_PU2
1262 - Add automatic HW detection for CMC_PU2 and CMC_BASIC
wdenke6ba3c92005-04-01 09:29:14 +00001263
wdenkf50cc092005-04-01 09:14:58 +00001264* Patch by Steven Scholz, 13 March 2005:
1265 fix cache enabling for AT91RM9200
1266
wdenkea287de2005-04-01 00:25:43 +00001267* Patch by Masami Komiya, 30 Mar 2005:
1268 add SNTP support and expand time server and time offset fields of
1269 DHCP support. See doc/README.SNTP
1270
1271* Patch by Steven Scholz, 13 Dec 2004:
1272 Fix bug in at91rm920 ethernet driver
1273
wdenkef2807c2005-03-31 23:44:33 +00001274* Patch by Steven Scholz, 13 Dec 2004:
1275 Remove duplicated code by merging memsetup.S files for
1276 at91rm9200 boards into one cpu/at91rm9200/lowlevel.S
1277
wdenk83e40ba2005-03-31 18:42:15 +00001278* Patch by Detlev Zundel, 31 Mar 2005:
1279 Cleanup duplicate definition of overwrite_console()
1280
1281* Update TQM5200 configuration;
1282 prepare for Rev. 200 starter kit boards
1283
wdenk0c1c1172005-03-30 23:28:18 +00001284* Patch by Scott McNutt, 21 Oct 2004:
1285 Add support for Nios-II EPCS Controller core.
1286
1287* Patch by Scott McNutt, 20 Oct 2004:
1288 Nios-II cleanups:
1289 - Add sysid command (Nios-II only).
1290 - Locate default exception trampoline at proper offset.
1291 - Implement I/O routines (readb, writeb, etc)
1292 - Implement do_bootm_linux
1293
wdenk8f0b7cb2005-03-27 23:41:39 +00001294* Patches by Martin Krause, 22 Mar 2005:
1295 - use TQM5200_auto as MAKEALL target for TQM5200 systems
1296 - add support for SM501 graphics controller
1297 - add support for graphic console on TQM5200
1298 - add support for TQM5200 Rev 200
1299 - cleanup, fix typo in include/configs/TQM5200.h
1300
wdenk256d31c2005-03-20 22:33:46 +00001301* Patch by Manfred Baral, 17 Mar 2005:
1302 Fix typo
1303
wdenke6325152005-03-17 16:43:10 +00001304* Fix RTC configuration for PPChameleon board
1305
1306* Cleanup, fix typo in include/configs/TQM5200.h
1307
stroeseacdcd102005-03-16 20:58:31 +00001308* Patch by Stefan Roese, 16 Mar 2005:
1309 Update for esd auto_update and hh405 board
1310
wdenk89c02e22005-03-16 16:32:26 +00001311* Adapt for U-Boot image size (new features enabled) on TQM5200
1312
wdenk6c9e7892005-03-15 22:56:53 +00001313* Update code for TQM8540 board (and 85xx in general):
1314 - Change the name of the Ethernet driver: MOTO ENET -> ENET
1315 - Reformat boot messages
1316 - Enable redundant environment
1317 - Replace the -O2 optimization flag with -mno-string
1318
wdenk9d46ea42005-03-14 23:56:42 +00001319* Patch by David Brownell, 10 Mar 2005:
1320 Restore copyright statements in OHCI drivers.
1321
1322* Add support for TQM8540 board
1323
wdenkc3fafec2005-03-14 23:01:03 +00001324* Patch by Detlev Zundel, 14 Mar 2005:
1325 NC650: changed NAND flash addressing to using UPMB
1326
1327* Patch by Stefan Roese, 14 Mar 2005:
stroesee9684a52005-03-14 12:56:21 +00001328 Update for esd voh405 fpga image
1329
wdenka0bdf492005-03-14 13:14:58 +00001330* INKA4x0: Allow initialization of LCD backlight dimming from
1331 "brightness" environment variable.
1332
wdenkf4733a02005-03-06 01:21:30 +00001333* Add port initialization for digital I/O on INKA4x0
1334
wdenkc3fafec2005-03-14 23:01:03 +00001335* Patch by Stefan Roese, 01 Mar 2005:
stroese47b1e3d2005-03-01 17:26:39 +00001336 Update for esd boards dp405 and hub405
1337
wdenkb05dcb52005-03-04 11:27:31 +00001338* Fix get_partition_info() parameter error in all other calls
1339 (common/cmd_ide.c, common/cmd_reiser.c, common/cmd_scsi.c).
1340
1341* Enable USB and IDE support for INKA4x0 board
1342
wdenkc3fafec2005-03-14 23:01:03 +00001343* Patch by Andrew Dyer, 28 Feb 2005:
wdenkb05dcb52005-03-04 11:27:31 +00001344 fix ext2load passing an incorrect pointer to get_partition_info()
1345 resulting in load failure for devices other than 0
1346
wdenke58cf2a2005-02-27 23:46:58 +00001347* Add support for SRAM and 2 x Quad UARTs on INKA4x0 board
1348
wdenk1968e612005-02-24 23:23:29 +00001349* Cleanup USB and partition defines
1350
wdenk151ab832005-02-24 22:44:16 +00001351* Add support for ext2 filesystems and image timestamps to TQM5200 board
1352
1353* Add reset code for Coral-P on INKA4x0 board
1354
1355* Patch by Martin Krause, 28 Jun 2004:
1356 Update for TRAB board.
1357
1358* Fix some missing "volatile"s in MPC5xxx FEC driver
1359
wdenke799d372005-02-07 19:44:17 +00001360* Fix cirrus voltage detection (for CPC45)
1361
wdenkf8883cb2005-02-04 15:38:08 +00001362* Fix byteorder problem in usbboot and scsiboot commands.
1363
wdenk20a80412005-02-04 15:02:06 +00001364* Patch by Cajus Hahn, 04 Feb 2005:
1365 - don't insist on leading '/' for filename in ext2load
1366 - set default partition to useful value (1) in ext2load
1367
1368* Patch by Andrew Dyer, 08 Jan 2005:
1369 fix wrong return codes in ext2 code
1370
wdenk1a344f22005-02-03 23:00:49 +00001371* Removed '--no-warn-mismatch' option from Makefile. This option
1372 makes 'ld' to overlook binary objects compatibility.
1373
1374* Moved $(PLATFORM_LIBS) from the library group (--start-group ...
1375 --end-group) outside of the group. This will make 'ld' to do
1376 _multiple_ search in the library group when resolving symbol
1377 references and do only a _single_ seach in libgcc.a after the group
1378 search.
1379
1380* Fix stability problems on CPC45 board again.
1381
1382* Make image detection for diskboot / usbboot / scsiboot more robust
1383 (also check header checksum)
1384
wdenk436be292005-01-31 22:09:11 +00001385* Update CPC45 board configuration.
1386
1387* Add USB and PCI support for INKA4x0 board
1388
wdenkcd172b72005-01-22 18:26:04 +00001389* Fix IDE stability problems on CPC45 board (needs 2 x EIEIO).
1390
wdenkc3d2b4b2005-01-22 18:13:04 +00001391* Code cleanup
1392
wdenk5a95f6f2005-01-12 00:38:03 +00001393* Patch by Robin Getz, 13 Oct 2004:
1394 Add standalone application to change SMC91C111 MAC addresses,
1395 see examples/README.smc91111_eeprom
1396
1397* Patch by Xiaogeng (Shawn) Jin, 12 Oct 2004:
1398 Fix Flash support for ARM Integrator CP.
1399
wdenk289f9322005-01-12 00:15:14 +00001400* Patch by Richard Woodruff, 10 Jan 2005:
1401 Update support for OMAP2420 (ARM11) and H4 board:
1402 o clean up and add new types to H4 memory probe code.
1403 o fix to work with internal boot.
1404 o added PRCM config III operation.
1405 o fix marginal flash timings.
1406 o add revison ATAG usage.
1407 o enable voltage scaling at power chip.
1408 o fix compile error for i2c.
1409
1410* Fix network problem (error when receiving multiple ARP packets)
1411
1412* Patch by Daniel Poirot, 12 Oct 2004:
wdenk652a10c2005-01-09 23:48:14 +00001413 Add support for Wind River sbc405 board
1414
1415* Patch by Rainer Brestan, 12 Oct 2004:
1416 Make examples/Makefile more robust
1417
wdenk6225c5d2005-01-09 23:33:49 +00001418* Patch by Sam Song, 11 October 2004:
1419 - Add RESET/PREBOOT/AUTOBOOT support for RPXlite_DW board
1420 - Adjust CPU:BUS frequency ratio 1:1 when core frequency
1421 less than 50MHz
1422
1423* Patch by Sam Song, 10 Oct 2004:
1424 Fix a parameter error in run_command() in main.c
1425
1426* Patch by Richard Woodruff, 01 Oct 2004:
wdenk8ed96042005-01-09 23:16:25 +00001427 add support for the TI OMAP2420 processor and its H4 reference
1428 board
1429
1430* Patch by Christian Pellegrin, 24 Sep 2004:
1431 Added support for NE2000 compatible (DP8390, DP83902) NICs.
1432
wdenkff36fd82005-01-09 22:28:56 +00001433* Patch by Leif Lindholm, 23 Sep 2004:
1434 add support for the AMD db1550 board
1435
1436* Patch by Travis Sawyer, 15 Sep 2004:
1437 Add CONFIG_SERIAL_MULTI support for ppc4xx,
1438 update README.serial_multi
1439
wdenk6310eb92005-01-09 21:28:15 +00001440* Patches by David Snowdon, 07 Sep 2004:
1441 - add u-boot.hex target in the top level Makefile
1442 - add support for the UNSW/NICTA PLEB 2 board (pleb2)
1443 - use -mtune=xscale and -march=armv5 options for PXA
1444
wdenka562e1b2005-01-09 18:21:42 +00001445* Patch by Florian Schlote, 08 Sep 2004:
1446 Add support for SenTec-COBRA5272-board (Coldfire).
1447
wdenk30ce5ab2005-01-09 18:12:51 +00001448* Patch by Gleb Natapov, 07 Sep 2004:
1449 mpc824x: set PCI latency timer to a sane value
1450 (is 0 after reset).
1451
1452* Patch by Kurt Stremerch, 03 Sep 2004:
1453 Add bitstream configuration option for fpga command (Xilinx only).
1454
wdenk9dd611b2005-01-09 17:19:34 +00001455* Patch by Kurt Stremerch, 03 Sep 2004:
1456 Add Xilinx Spartan2E family FPGA support
1457
1458* Patch by Jeff Angielski, 02 Sep 2004:
1459 Add Added support for H2 revision of the EP8260 board.
1460 Fixed formatting for some of the EP8260 related source files.
1461
wdenka1191902005-01-09 17:12:27 +00001462* Patch by Jon Loeliger, 02 Sep 2004:
1463 Reset monitor size back to 256 so environment can be written
1464 to flash on MPC85xx ADS and CDS releases.
1465
1466* Patch by Paolo Broggini, 02 Sep 2004:
1467 Make BSS clearing on ARM systems more robust
1468
1469* Patch by Yue Hu and Joe, 01 Sep 2004:
1470 - add PCI support for ixp425;
1471 - add EEPRO100 suppor tfor ixdp425 board.
1472
1473* Fix problem with protected sector detection in driver/cfi_flash.c
1474
1475======================================================================
wdenk15c7a8e2005-01-02 17:02:54 +00001476Changes for U-Boot 1.1.2:
wdenk2729af92004-05-03 20:45:30 +00001477======================================================================
1478
wdenke2ffd592004-12-31 09:32:47 +00001479* Code cleanup, mostly for GCC-3.3.x
1480
1481* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
1482 pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
1483 additional ethernet addresses.
1484
1485* Cleanup drivers/i82365.c - avoid duplication of code
1486
1487* Fix bogus "cannot span across banks" flash error message
1488
1489* Code cleanup
1490
1491* Add support for CompactFlash for the CPC45 Board.
1492
wdenk08f27272004-12-19 21:39:27 +00001493* Fix problems with CMC_PU2 flash driver.
1494
wdenkec0aee72004-12-19 09:58:11 +00001495* Cleanup:
1496 - avoid trigraph warning in fs/ext2/ext2fs.c
1497 - rename UC100 -> uc100
1498
wdenkf7d15722004-12-18 22:35:43 +00001499* Add support for UC100 board
1500
stroese8cba1902004-12-16 18:47:58 +00001501* Patch by Stefan Roese, 16 Dez 2004:
1502 - ext2fs support added
1503 - Tundra universe support added
1504 - Coldfire MCF5249 support added (no preloader needed!)
1505 - MCF5249 board TASREG added
1506 - PPC boards added: APC405, CPCI405DT, CPCI750, G2000, HH405,
1507 VOM405, WUH405
1508 - some esd boards updated
1509 - memory commands "mdc" and "mwc" added for cyclic read/write
1510 (CONFIG_MX_CYCLIC, see README for further description)
1511
wdenk138ff602004-12-16 15:52:40 +00001512* Add support for INKA4X0 board
1513
wdenk689aec12004-12-13 00:18:44 +00001514* Patch by Steven Scholz, 12 Dec 2004:
1515 Fix typo in AT91 memory setup.
1516
wdenk7e6bf352004-12-12 22:06:17 +00001517* Patch by Martin Krause, 27 Oct 2004:
1518 - add support for "STK52xx" board (including PS/2 multiplexer)
1519 - add hardware detection for TQM5200
1520
wdenk25d67122004-12-10 11:40:40 +00001521* Clean up CMC PU2 flash driver
1522
1523* Update MAINTAINERS file
1524
1525* Fix bug in MPC823 LCD driver
1526
wdenked54e622004-11-24 23:35:19 +00001527* Fix udelay() on AT91RM9200 for delays < 1 ms.
1528
1529* Enable long help on CMC PU2 board;
1530 fix reset issue;
1531 increase CPU speed from 179 to 207 MHz.
1532
wdenkbb310d42004-11-22 22:20:07 +00001533* Fix smc91111 ethernet driver for Xaeniax board (need to handle
1534 unaligned tail part specially).
1535
wdenk9d5028c2004-11-21 00:06:33 +00001536* Update for AT91RM9200DK and CMC_PU2 boards:
1537 - Enable booting directly from flash
1538 - fix CMC_PU2 flash driver
1539
1540* Fix mkimage usage message
1541
wdenkcacfab52004-11-17 20:44:20 +00001542* Map SRAM on NC650 board
1543
wdenk1f6d4252004-11-02 13:00:33 +00001544* Work around for Ethernet problems on Xaeniax board
1545
wdenk983fda82004-10-28 00:09:35 +00001546* Patch by TsiChung Liew, 23 Sep 2004:
1547 - add support for MPC8220 CPU
1548 - Add support for Alaska and Yukon boards
1549
wdenke3c9b9f2004-10-24 23:54:40 +00001550* Fix configuration for ERIC board (needs more room)
1551
1552* Adjust MIPS compiler options at run-time depending on tools version
1553 ("-march=4kc -mtune=4kc -Wa,-mips_allow_branch_to_undefined" for new,
1554 "-mcpu=4kc" for old tools)
1555
wdenk14699a22004-10-19 22:17:51 +00001556* Add passing of the command line and memory size information to the
1557 kernel on xaeniax board.
1558
wdenk4cfaf552004-10-11 23:03:10 +00001559* Enable NAND flash support for NC650 board.
1560
1561* Patch by Thomas Lange 07 Oct 2004:
1562 Updated README for DBAu1x00 boards to match current status
1563
wdenkd407bf52004-10-11 22:51:13 +00001564* Patch by Philippe Robin, 28 Sept 2004:
1565 Fix Flash support for Versatile.
1566
1567* Patch by Roger Blofeld, 16 Sep 2004:
1568 Fix timeout for DHCP command retry
1569
wdenk2ee66532004-10-11 22:43:02 +00001570* Patch by Pantelis Antoniou, 14 Sep 2004:
1571 Fix early serial hang when CONFIG_SERIAL_MULTI is defined.
1572
1573* Patch by Pantelis Antoniou, 14 Sep 2004:
1574 Kick watchdog when bz-decompressing
1575
wdenk9455b7f2004-10-11 22:25:49 +00001576* Fix CFG_HZ problems on AT91RM9200 systems
1577 [Remember: CFG_HZ should be 1000 on ALL systems!]
1578
wdenke1599e82004-10-10 23:27:33 +00001579* Patch by Gridish Shlomi, 30 Aug 2004:
1580 - Add support to revA version of PQ27 and PQ27E.
1581 - Reverted MPC8260ADS baudrate back to original 115200
1582
1583* Patch by Hojin, 17 Sep 2004:
1584 Fix typo in cfi_flash.c
wdenk8b74bf32004-10-11 23:10:30 +00001585
wdenke1599e82004-10-10 23:27:33 +00001586* Patch by Mark Jonas, 09 September 2004:
1587 mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong
1588 error message
1589
1590* Patch by Mark Jonas, 31 August 2004:
1591 Added option CFG_XLB_PIPELINING to enable XLB pipelining. This
1592 improves FTP performance for MPC5200 systems. Enabled for IceCube
1593 by default.
1594
wdenkc15f3122004-10-10 22:44:24 +00001595* Patch by Michael Bendzick, 30 Aug 2004:
1596 - Improve platform.S code for omap1510inn that detects whether code
1597 is running from SDRAM or not. Patch allows SDRAM to be configured
1598 if code is running out of SRAM at 0x20000000.
1599
1600* Patch by Frederick Klatt, 30 Aug 2004:
1601 Add support for the Wind River SBC8540/SBC8560 boards
1602
wdenk656658d2004-10-10 22:16:06 +00001603* Configure SX1 board to use drivers/cfi_flash.c
1604
1605* Patches by Michael Bendzick, 30 Aug 2004:
1606 - Configure omap1510inn board to use drivers/cfi_flash.c
1607 - Make drivers/cfi_flash.c protect environment and redundant
1608 environment.
1609
1610* Patch by Steven Scholz, 23 Jun 2004:
1611 - Add script (tools/img2brec.sh) to programm U-Boot into
1612 (Synch)Flash using the Bootstrap Mode of the MC9328MX1/L
1613
wdenk5c952cf2004-10-10 21:27:30 +00001614* Patches by Scott McNutt, 24 Aug 2004:
1615 - Add support for Altera Nios-II processors.
1616 - Add support for Psyent PCI-5441 board.
1617 - Add support for Psyent PK1C20 board.
1618
wdenk03f5c552004-10-10 21:21:55 +00001619* Patches by Jon Loeliger, 24 Aug 2004:
1620 - Add support for the MPC8541 and MPC8555 CDS boards
1621 - Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR
1622 - Convert MPC85xxADS to use common CFI flash driver
wdenkcf336782004-10-10 20:23:57 +00001623 - Fix PCI window on MPC85xx; remove unneeded PCI initialization
1624 from board_early_init_f()
1625 - Provide SW workaround for PCI initialization on 85xx CDS
wdenkcf336782004-10-10 20:23:57 +00001626
wdenk08b6aa62004-10-10 18:49:14 +00001627* Patches by George G. Davis, 24 Aug 2004:
1628 - Enable ramdisk/initrd tagged param support for omap1610h2_config
1629 - Remove static network setup defaults from mx1ads_config
wdenk731215e2004-10-10 18:41:04 +00001630 - update ARM boards to use constants from mach-types.h
1631
wdenkb6508512004-10-10 18:03:33 +00001632* Patch by Gary Jennejohn, 04 Oct 2004:
1633 - fix I2C on at91rm9200
1634 - add support for Ricoh RS5C372A RTC
1635
wdenk2cbe5712004-10-10 17:05:18 +00001636* Patch by Gary Jennejohn, 01 Oct 2004:
1637 - add support for CMC PU2 board
1638 - add support for I2C on at91rm9200
1639
1640* Patch by Gary Jennejohn, 28 Sep 2004:
1641 fix baudrate handling on at91rm9200
1642
wdenk659883c2004-10-09 23:33:42 +00001643* Patch by Yuli Barcohen, 22 Aug 2004:
1644 - remove ZPC.1900 board-specific flash driver;
1645 switch the port to generic CFI driver;
1646 - port clean-up
1647
wdenkf325e182004-10-09 23:28:40 +00001648* Patch by Hinko Kocevar, 21 Aug 2004:
1649 Add calc_fbsize() function used with VIDEOLFB_TAG on TRAB
1650
wdenk8655b6f2004-10-09 23:25:58 +00001651* Clean up tools/bmp_logo.c to not add trailing white space
1652
1653* Patch by Hinko Kocevar, 21 Aug 2004:
1654 - Group common framebuffer functions in common/lcd.c
1655 - Group common framebuffer macros and #defines in include/lcd.h
1656 - Provide calc_fbsize() for video ATAG
1657
wdenk30d56fa2004-10-09 22:44:59 +00001658* Patch by Sam Song, 21 August 2004:
1659 - Fix a typo in README
1660 - Align "(RO)" output for "flinfo" after "protect on"
1661 - Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency
1662 ratio 1:1 when core frequency less than 50MHz
1663
wdenk8655b6f2004-10-09 23:25:58 +00001664* Patches by Hinko Kocevar, 21 Aug 2004:
wdenk63cfcbb2004-10-09 22:32:26 +00001665 - fix some "use of label at end of compound statement" warnings
1666 - Define type of LCD panel on lubbock board if CONFIG_LCD is used
1667
wdenk1d9f4102004-10-09 22:21:29 +00001668* Patch by Steven Scholz, 16 Aug 2004:
1669 - Introducing the concept of SoCs "./cpu/$(CPU)/$(SOC)"
1670 - creating subdirs for SoCs ./cpu/arm920t/imx and ./cpu/arm920t/s3c24x0
1671 - moving SoC specific code out of cpu/arm920t/ into cpu/arm920t/$(SOC)/
1672 - moving drivers/s3c24x0_i2c.c and drivers/serial_imx.c out of drivers/
1673 into cpu/arm920t/$(SOC)/
1674
wdenka5bbcc32004-09-29 22:55:14 +00001675* Patches by Sean Chang, 09 Aug 2004:
1676 - Added support for both 8 and 16 bit mode access to System ACE CF
1677 through MPU.
1678 - Fixed missing System ACE CF device during get FAT partition info
1679 in fat_register_device function.
1680 - Enabled System ACE CF support on ML300.
1681
1682* Patch by Sean Chang, 09 Aug 2004:
1683 Synch defines for saveenv and do_saveenv functions so they get
1684 compiled under the same statement.
1685
1686* Patch by Sean Chang, 09 Aug 2004:
wdenka06752e2004-09-29 22:43:59 +00001687 - Added I2C support for ML300.
1688 - Added support for ML300 to read out its environment information
1689 stored on the EEPROM.
1690 - Added support to use board specific parameters as part of
1691 U-Boot's environment information.
1692 - Updated MLD files to support configuration for new features
1693 above.
1694
wdenka5bbcc32004-09-29 22:55:14 +00001695* Patches by Travis Sawyer, 05 Aug 2004:
wdenka06752e2004-09-29 22:43:59 +00001696 - Remove incorrect bridge settings for eth group 6
1697 - Add call to setup bridge in ppc_440x_eth_initialize
1698 - Fix ppc_440x_eth_init to reset the phy only if its the
1699 first time through, otherwise, just check the phy for the
1700 autonegotiated speed/duplex. This allows the use of netconsole
1701 - only print the speed/duplex the first time the phy is reset.
1702
wdenkda93ed82004-09-29 11:02:56 +00001703* Patch by Shlomo Kut, 29 Mar 2004:
1704 Add support for MKS Instruments "Quantum" board
1705
1706* Fix build problem with Cogent boards;
1707 avoid using <asm/byteorder.h> when using the host compiler
1708
wdenka5725fa2004-09-28 21:51:42 +00001709* Patch by Ganapathi C, 04 Aug 2004:
1710 Fix NFS timeout issue
1711
wdenke1a3f6b2004-09-28 21:39:45 +00001712* Patch by Yuli Barcohen, 19 Jul 2004:
1713 - Fix host tools building in Cygwin environment
1714 - Fix header files search order for host tools
1715
1716* Patch by Tom Armistead, 19 Jul 2004:
1717 Fix kgdb.S support for 74xx_75x cpu
1718
wdenkc65fdc72004-09-28 21:26:26 +00001719* Patch by Jon Loeliger, 15 Jul 2004:
1720 Fix MPC85xx I2C driver
1721
wdenk64f70be2004-09-28 20:34:50 +00001722* Fix problems with CDROM drive as slave device on Lite5200 IDE bus.
1723
wdenkcce625e2004-09-28 19:00:19 +00001724* Patch by Stephen Williams, 15 July 2004
1725 Set the PCI class code for JSE board as part of PCI interface setup
1726
1727* Patch by Michael Bendzick, 15 Jul 2004:
1728 Fix problem with writes with odd sizes in drivers/cfi_flash.c when
1729 CFG_FLASH_USE_BUFFER_WRITE is set
1730
wdenk66ca92a2004-09-28 17:59:53 +00001731* Patch by Yuli Barcohen, 13 Jul 2004:
1732 Allow clock setting on MPC866/MPC885 series chips according to
1733 environment variable `cpuclk'
1734
1735* Patch by Yuli Barcohen, 20 Apr 2004:
1736 Remove unnecessary redefine of CPM_DATAONLY_SIZE for MPC826x
1737
wdenk4ec3a7f2004-09-28 16:44:41 +00001738* Patch by Vincent Dubey, 24 Sep 2004:
1739 Add support for xaeniax board
1740
wdenk79536a62004-09-27 20:20:11 +00001741* Add comment about non-GPL character of standalone applications to
1742 COPYING file
1743
1744* Fix FEC ethernet problem on NSCU board.
1745
wdenk4734cb72004-09-21 23:33:32 +00001746* Patch by Gary Jennejohn, 09 Sep 2004:
1747 allow to use USART1 as console port on at91rm9200dk boards
1748
stroesec3548392004-09-16 12:37:13 +00001749* Patch by Stefan Roese, 16 Sep 2004:
1750 Update AR405 board.
1751
wdenk1d6f9722004-09-09 17:44:35 +00001752* Fix SysClk handling for PPChameleon and CATcenter boards
1753
wdenkeedcd072004-09-08 22:03:11 +00001754* Patch by Detlev Zundel, 08 Sep 2004:
1755 Update etags build target
1756
1757* Improve NetConsole support: add support for broadcast destination
1758 address and buffered input.
1759
1760* Cleanup compiler warnings for GCC 3.3.x and later
1761
1762* Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch
1763
wdenk7ca202f2004-08-28 22:45:57 +00001764* Add support for IDS "NC650" board
1765
wdenk31a64922004-08-28 21:09:14 +00001766* Add automatic update support for LWMON board
1767
1768* Clear Block Lock-Bits when erasing flash on LWMON board.
1769
1770* Fix return code of "fatload" command
1771
1772* Enable MSDOS/VFAT filesystem support for LWMON board
1773
wdenk89394042004-08-04 21:56:49 +00001774* Patch by Martin Krause, 03 Aug 2004:
1775 change timing for SM501 graphics controller on TQM5200 module
1776
1777* Patch by Mark Jonas, 13 July 2004:
1778 - Total5200 LCD now run in little endian mode. Endianess conversion
1779 is done in hardware.
wdenk7ca202f2004-08-28 22:45:57 +00001780 - Removed last reference to "console" environment variable.
wdenk89394042004-08-04 21:56:49 +00001781
wdenk429168e2004-08-02 23:39:03 +00001782* Patches by Lars Munch, 12 Jul 2004:
1783 - move at45.c to board/at91rm9200dk/ since this is at91rm9200dk
1784 board specific
1785 - split out the LXT971A PHY from ns_9750_eth.h
1786 - split the dm9161 phy part out of at91rm9200_ether.c
1787
wdenk6705d812004-08-02 23:22:59 +00001788* Patch by Andreas Engel, 12 Jul 2004:
1789 Replaced hardcoded PL011 clock frequency with config variable.
1790 Fixed wrong CONFIG_CMD_DFL doc.
1791
1792* Patch by Thomas Viehweger, 09 Jun 2004:
1793 make it possible to remove chpart when there is only one partition
1794
wdenk68ceb292004-08-02 21:11:11 +00001795* Add support for console over UDP (compatible to Ingo Molnar's
1796 netconsole patch under Linux)
1797
wdenk9aea9532004-08-01 23:02:45 +00001798* Patch by Jon Loeliger, 16 Jul 2004:
1799 - support larger DDR memories up to 2G on the PC8540/8560ADS and
1800 STXGP3 boards
1801 - Made MPC8540/8560ADS be 33Mhz PCI by default.
1802 - Removed moldy CONFIG_RAM_AS_FLASH, CFG_FLASH_PORT_WIDTH_16
1803 and CONFIG_L2_INIT_RAM options.
1804 - Refactor Local Bus initialization out of SDRAM setup.
1805 - Re-implement new version of LBC11/DDR11 errata workarounds.
1806 - Moved board specific PCI init parts out of CPU directory.
1807 - Added TLB entry for PCI-1 IO Memory
1808 - Updated README.mpc85xxads
1809
wdenk281e00a2004-08-01 22:48:16 +00001810* Patch by Sascha Hauer, 28 Jun:
1811 - add generic support for Motorola i.MX architecture
1812 - add support for mx1ads, mx1fs2 and scb9328 boards
1813
1814* Patches by Marc Leeman, 23 Jul 2004:
1815 - Add define for the PCI/Memory Buffer Configuration Register
1816 - corrected comments in cpu/mpc824x/cpu_init.c
1817
1818* Add support for multiple serial interfaces
1819 (for example to allow modem dial-in / dial-out)
1820
stroese45eeb892004-07-15 14:41:43 +00001821* Patch by Stefan Roese, 15 Jul 2004:
1822 cpu/ppc4xx/sdram.c rewritten now using get_ram_size()
1823
wdenkcfca5e62004-08-01 13:09:47 +00001824* Fix NSCU config; add ethernet wakeup code.
1825
wdenk281e00a2004-08-01 22:48:16 +00001826* Add link for preloader for Motorola Coldfire to README.m68k
wdenkcfca5e62004-08-01 13:09:47 +00001827
wdenk75b1fa72004-07-12 22:34:51 +00001828* Patch by Michael Bendzick, 12 Jul 2004:
1829 fix output formatting in drivers/cfi_flash.c
1830
wdenk07cba352004-07-12 14:37:59 +00001831* Patch by Mark Jonas, 02 Jul 2004:
1832 Fix lowboot (again) on MPC5xxx
1833
wdenkcdc7fea2004-07-11 22:27:55 +00001834* Patch by Curt Brune, 07 Jul 2004:
1835 relocate exception vectors on arm720t if needed
1836
wdenka1f4a3d2004-07-11 22:19:26 +00001837* Patch by George G. Davis, 06 Jul 2004:
1838 - update mach-types.h to latest arm.linux.org.uk master list
1839 - Set correct OMAP1610 bi_arch_number for build target
1840
1841* Patch by Curt Brune, 06 Jul 2004:
1842 evb4510: add support for timer interrupt; cleanup
1843
wdenkb9283e22004-07-11 21:49:42 +00001844* Patch by Dan Poirot, 06 Jul 2004:
1845 Fix sbc8260 environment variables
1846
1847* Cleanup redundand "console" environment variable
1848
wdenk81050922004-07-11 20:04:51 +00001849* Patch by Mark Jonas, 05 Jul 2004:
1850 add support for the Total5100's and Total5200's LCD screen
1851
1852* Patches by Dan Eisenhut, 01 Jul 2004:
1853 - README fixes.
1854 - Move doc2000.h include to prevent compiler warning on some boards
1855
wdenk6c7a1402004-07-11 19:17:20 +00001856* Patch by Mark Jonas, 01 Jul 2004:
1857 Added support for Total5100 and Total5200 (Rev.1 and Rev.2)
1858 MGT5100 and MPC5200 based Freescale platforms.
1859
wdenkbc54f302004-07-11 18:10:30 +00001860* Patch by Philippe Robin, 01 Jul 2004:
1861 Add initialization for Integrator and versatile board files.
1862
1863* Patch by Hinko Kocevar, 01 Jun 2004:
1864 Fix VFD FB allocation, add LCD FB allocation on ARM
1865
wdenk56523f12004-07-11 17:40:54 +00001866* Patch by Martin Krause, 30 Jun 2004:
1867 Add support for TQM5200 board
1868
1869* Patch by Martin Krause, 29 Jun 2004:
1870 Add loopw command: infinite write loop on address range
1871
wdenk857cad32004-07-10 23:48:41 +00001872* Patches by Yasushi Shoji, 29 Jun 2004:
1873 - add empty include/asm-microblaze/processor.h
1874 - add to CREDITS and MAINTAINERS
1875 - add gd initialization
1876 - add MicroBlaze and SUZAKU board to MAKEALL script
1877 - add reset support for SUZAKU
1878 - add flush_cache() for MicroBlaze
1879 - add CFG_FLASH_SIZE to include/configs/suzaku.h since we have fixed
1880 size flash memory on SUZAKU
1881
wdenkfabd46a2004-07-10 23:11:10 +00001882* Patch by Prakash Kumar, 27 Jun 2004:
1883 Add support for the PXA250 based Intrinsyc Cerf board.
1884
1885* Patch by Yasushi Shoji, 27 Jun 2004:
1886 fix comment in include/common.h
1887
wdenk466b7412004-07-10 22:35:59 +00001888* Rename SBC8560 into sbc8560 for consistency
1889
1890* Patch by Daniel Poirot, 24 Jun 2004:
1891 Add support for Wind River's sbc8240 board
1892
1893* Patches by Yasushi Shoji, 26 Jun 2004:
1894 - drivers/serial_xuartlite.c: fix "return 0" in void function
1895 - add microblaze support to mkimage tool
1896
wdenk8b07a112004-07-10 21:45:47 +00001897* Patch by Fred Klatt, 25 Jun 2004:
wdenk466b7412004-07-10 22:35:59 +00001898 Add support for WindRiver's sbc8560 board
wdenk8b07a112004-07-10 21:45:47 +00001899
1900* Patch by Nicolas Lacressonniere, 24 Jun 2004
1901 Small Bugs fixes for "at91rm9200dk" board:
1902 - Timing modifications for SPI DataFlash access
1903 - Fix NAND flash detection bug
1904
1905* Patch by Nicolas Lacressonniere, 24 Jun 2004:
1906 Add Support for Flash AT49BV6416 for AT91RM9200DK board
1907
wdenk0ac6f8b2004-07-09 23:27:13 +00001908* Patch by Jon Loeliger, 17 June 2004:
1909 Completion of the 8540ADS/8560ADS updates:
1910 Fix some PCI and Rapid I/O memory maps,
1911 Initialize both TSEC 1 and 2,
1912 Initialize SDRAM
1913 Update MAINTAINER for 85xx boards and README.mpc85xxads
1914
wdenk26238132004-07-09 22:51:01 +00001915* Patch by Yuli Barcohen, 16 Jun 2004:
1916 Remove obsolete AdderII port which was superseded by unified
1917 AdderII/Adder87x port
1918
1919* Patch by Ladislav Michl, 16 Jun 2004:
1920 Fix gcc-3.3.3 warnings for smc91111.c
1921
stroeseede13022004-07-02 14:38:26 +00001922* Patch by Stefan Roese, 02 Jul 2004:
1923 - Fix bug in 405 ethernet driver; allocated data not cleared!
1924 - Fix problem in 405 i2c driver; don't try to print without console!
1925
wdenk78953f22004-07-01 22:02:29 +00001926* Patch by Paul Ruhland, 11 Jun 2004:
1927 Remove debug code from 'board/lpd7a40x/flash.c'
1928
wdenke55ca7e2004-07-01 21:40:08 +00001929* Patch by Andrea Marson, 11 Jun 2004:
1930 Update for PPChameleon board:
1931 - support for SysClk @ 25MHz
1932 - support for Silicon Motion SM712 VGA controller
1933 - some clean ups
1934
wdenk93f6a672004-07-01 20:28:03 +00001935* Patches by Richard Woodruff, 10 Jun 2004:
1936 - fix problems with examples/stubs.c for GCC >= 3.4
1937 - fix problems with gd initialization
1938
wdenk39539882004-07-01 16:30:44 +00001939* Patch by Curt Brune, 17 May 2004:
1940 - Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
1941 - Add support for ESPD-Inc. EVB4510 Board
1942
1943* Patch by Marc Leeman, 11 May 2004:
1944 Fix for MPC8245 - reading PPC Memory from another device with the
1945 PPC as PCI target device corrupts data due to interenal hardware
1946 buffering.
1947
wdenke94d2cd2004-06-30 22:59:18 +00001948* Fix "cls" command when used with splash screen
1949
1950* Increase NFS download timeout (now 1 min - 10 sec is to short for a
1951 slow download of a big image)
1952
wdenkc3f4d172004-06-25 23:35:58 +00001953* Add "cls" function to MPC823 LCD driver so we can reinitialize the
1954 display even after showing a bitmap
1955
wdenk49822e22004-06-19 21:19:10 +00001956* Patch by Josef Wagner, 04 Jun 2004:
1957 - DDR Ram support for PM520 (MPC5200)
1958 - support for different flash types (PM520)
1959 - USB / IDE / CF-Card / DiskOnChip support for PM520
1960 - 8 bit boot rom support for PM520/CE520
1961 - Add auto SDRAM module detection for MicroSys CPC45 board (MPC8245)
1962 - I2C and RTC support for CPC45
1963 - support of new flash type (28F160C3T) for CPC45
1964
wdenk46a414d2004-06-17 18:50:45 +00001965* Fix flash parameters passed to Linux for PPChameleon board
1966
1967* Remove eth_init() from lib_arm/board.c; it's done in net.net.c.
1968
wdenkf832d8a2004-06-10 21:55:33 +00001969* Patch by Paul Ruhland, 10 Jun 2004:
wdenk49822e22004-06-19 21:19:10 +00001970 fix support for Logic SDK-LH7A404 board and clean up the
wdenkf832d8a2004-06-10 21:55:33 +00001971 LH7A404 register macros.
1972
1973* Patch by Matthew McClintock, 10 Jun 2004:
1974 Modify code to select correct serial clock on Sandpoint8245
1975
wdenkb54d32b2004-06-10 21:34:36 +00001976* Patch by Robert Schwebel, 10 Jun 2004:
1977 Add support for Intel K3 strata flash.
1978
1979* Patch by Thomas Brand, 10 Jun 2004:
1980 Fix "loads" command on DK1S10 board
1981
wdenk2d24a3a2004-06-09 21:50:45 +00001982* Patch by Yuli Barcohen, 09 Jun 2004:
wdenk99edcfb2004-06-09 21:54:22 +00001983 Add support for 8MB flash SIMM and JFFS2 file system on
1984 Motorola FADS board and its derivatives (MPC86xADS, MPC885ADS).
1985
1986* Patch by Yuli Barcohen, 09 Jun 2004:
wdenk2d24a3a2004-06-09 21:50:45 +00001987 Add support for Analogue&Micro Adder87x and the older AdderII board.
1988
1989* Patch by Ming-Len Wu, 09 Jun 2004:
1990 Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board
1991
wdenke63c8ee2004-06-09 21:04:48 +00001992* Patch by Sam Song, 09 Jun 2004:
1993 - Add support for RPXlite_DW board
1994 - Update FLASH driver for 4*AM29DL323DB90VI
1995 - Add option configuration of CFG_ENV_IS_IN_NVRAM on RPXlite_DW board
1996
wdenk36c72872004-06-09 17:45:32 +00001997* Patch by Mark Jonas, 08 June 2004:
1998 - Make MPC5200 boards evaluate the SVR to print processor name and
1999 version in checkcpu() (cpu/mpc5xxx/cpu.c).
2000
2001* Patch by Kai-Uwe Bloem, 06 May 2004:
2002 Fix endianess problem in cramfs code
2003
wdenk4c0d4c32004-06-09 17:34:58 +00002004* Patch by Tom Armistead, 04 Jun 2004:
2005 Add support for MAX6900 RTC
2006
2007* Patches by Ladislav Michl, 03 Jun 2004:
2008 - fix cfi_flash.c on LE systems
2009 - let 'make mrproper' delete u-boot.img as well
2010 - turn printf into debug in cfi_flash.c
2011
wdenkca0e7742004-06-09 15:37:23 +00002012* Patch by Kurt Stremerch, 28 May 2004:
2013 Add support for Exys XSEngine board
2014
wdenk697037f2004-06-09 15:29:49 +00002015* Patch by Martin Krause, 27 May 2004:
2016 Fix a MPC5xxx I2C timing issue in i2c_probe().
2017
2018* Patch by Leif Lindholm, 27 May 2004:
2019 Fix board_init_f() for dbau1x00 board.
2020
wdenk3ff02c22004-06-09 15:25:53 +00002021* Patch by Imre Deak, 26 May 2004:
2022 On OMAP1610 platforms check if booting from RAM(CS0) or flash(CS3).
2023 Set flash base accordingly, and decide whether to do or skip board
2024 specific setup steps.
2025
2026* Patch by Josef Baumgartner, 26 May 2004:
2027 Add missing define in include/asm-m68k/global_data.h
2028
wdenk70f05ac2004-06-09 15:24:18 +00002029* Patch by Josef Baumgartner, 25 May 2004:
2030 Add missing functions get_ticks() and get_tbclk() in lib_m68k/time.c
2031
2032* Patch by Paul Ruhland, 24 May 2004:
2033 fix SDRAM initialization for LPD7A400 board.
2034
wdenk13a56952004-06-09 14:58:14 +00002035* Patch by Jian Zhang, 20 May 2004:
2036 add support for environment in NAND flash
2037
wdenkc3c7f862004-06-09 14:47:54 +00002038* Patch by Yuli Barcohen, 20 May 2004:
2039 Add support for Interphase iSPAN boards.
2040
2041* Patches by Paul Ruhland, 17 May 2004:
2042 - Add I/O functions to the smc91111 ethernet driver to support the
2043 Logic LPD7A40x boards.
wdenkf39748a2004-06-09 13:37:52 +00002044 - Add support for the Logic Zoom LH7A40x based SDK board(s),
2045 specifically the LPD7A400.
2046
2047* Patches by Robert Schwebel, 15 May 2004:
2048 - call MAC address reading code also for SMSC91C111;
2049 - make SMSC91C111 timeout configurable, remove duplicate code
2050 - fix get_timer() for PXA
2051 - update doc/README.JFFS2
2052 - use "bootfile" env variable also for jffs2
2053
wdenkaa245092004-06-09 12:47:02 +00002054* Patch by Tolunay Orkun, 14 May 2004:
2055 Add support for Cogent CSB472 board (8MB Flash Rev)
2056
wdenkaa5590b2004-06-09 12:42:26 +00002057* Patch by Thomas Viehweger, 14 May 2004:
2058 - flash.h: more flash types added
2059 - immap_8260.h: some bits added (useful for RMII)
2060 - cmd_coninfo.c: typo corrected, printf -> puts
2061 - reduced size by replacing spaces with tab
2062
wdenk48abe7b2004-06-09 10:15:00 +00002063* Patch by Robert Schwebel, 13 May 2004:
2064 Add 'imgextract' command: extract one part of a multi file image.
2065
wdenk547b4cb2004-06-09 00:51:50 +00002066* Patches by Jon Loeliger, 11 May 2004:
wdenk97d80fc2004-06-09 00:34:46 +00002067 Dynamically handle REV1 and REV2 MPC85xx parts.
2068 (Jon Loeliger, 10-May-2004).
2069 New consistent memory map and Local Access Window across MPC85xx line.
2070 New CCSRBAR at 0xE000_0000 now.
2071 Add RAPID I/O memory map.
2072 New memory map in README.MPC85xxads
2073 (Kumar Gala, 10-May-2004)
2074 Better board and CPU identification on MPC85xx boards at boot.
2075 (Jon Loeliger, 10-May-2004)
2076 SDRAM clock control fixes on MPC8540ADS & MPC8560 boards.
2077 Some configuration options for MPC8540ADS & MPC8560ADS cleaned up.
2078 (Jim Robertson, 10-May-2004)
2079 Rewrite of the MPC85xx Three Speed Ethernet Controller (TSEC) driver.
2080 Supports multiple PHYs.
2081 (Andy Fleming, 10-May-2004)
2082 Some README.MPC85xxads updates.
2083 (Kumar Gala, 10-May-2004)
2084 Copyright updates for "Freescale"
2085 (Andy Fleming, 10-May-2004)
2086
wdenk6bdd1372004-06-09 00:15:33 +00002087* Patch by Stephen Williams, 11 May 2004:
2088 Add flash support for ST M29W040B
2089 Reduce JSE specific flash.c to remove dead code.
2090
wdenk356a0d92004-06-09 00:10:59 +00002091* Patch by Markus Pietrek, 04 May 2004:
2092 Fix clear_bss code for ARM systems (all except s3c44b0 which
2093 doesn't clear BSS at all?)
2094
2095* Fix "ping" problem on INC-IP board. Strange problem:
2096 Sometimes the store word instruction hangs while writing to one of
2097 the Switch registers, but only if the next instruction is 16-byte
2098 aligned. Moving the instruction into a separate function somehow
2099 makes the problem go away.
2100
wdenk1eaeb582004-06-08 00:22:43 +00002101* Patch by Rishi Bhattacharya, 08 May 2004:
2102 Add support for TI OMAP5912 OSK Board
2103
2104* Patch by Sam Song May, 07 May 2004:
2105 Fix typo of UPM table for rmu board
2106
2107* Patch by Pantelis Antoniou, 05 May 2004:
wdenk79fa88f2004-06-07 23:46:25 +00002108 - Intracom board update.
2109 - Add Codec POST.
2110
wdenkcea655a2004-06-06 23:53:59 +00002111* Add support for the second Ethernet interface for the 'PPChameleon'
2112 board.
2113
wdenka56bd922004-06-06 23:13:55 +00002114* Patch by Dave Peverley, 30 Apr 2004:
2115 Add support for OMAP730 Perseus2 Development board
2116
2117* Patch by Alan J. Luse, 29 Apr 2004:
2118 Fix flash chip-select (OR0) option register setting on FADS boards.
2119
2120* Patch by Alan J. Luse, 29 Apr 2004:
2121 Report MII network speed and duplex setting properly when
2122 auto-negotiate is not enabled.
2123
2124* Patch by Jarrett Redd, 29 Apr 2004:
2125 Fix hang on reset on Ocotea board due to flash in wrong mode.
2126
wdenk5ca26792004-06-06 22:11:41 +00002127* Patch by Dave Peverley, 29 Apr 2004:
2128 add MAC address detection to smc91111 driver
2129
2130* Patch by David Müller, 28 Apr 2004:
2131 fix typo in lib_arm/board.c
2132
wdenk17ea1172004-06-06 21:51:03 +00002133* Patch by Tolunay Orkun, 20 Apr 2004:
2134 - README update: add CONFIG_CSB272 and csb272_config
2135 - add descriptions for some MII/PHY options, CONFIG_I2CFAST, and
2136 i2cfast environment variable
2137
wdenk11142572004-06-06 21:35:06 +00002138* Patch by Yuli Barcohen, 19 Apr 2004:
2139 - Rename DUET_ADS to MPC885ADS
2140 - Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
2141 - Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY
2142 - Clean up FADS family port to use the new defines
2143
wdenk979bdbc2004-06-01 21:08:17 +00002144* Fix PCI support on CPC45 board
2145
wdenke4cc71a2004-05-19 21:33:14 +00002146* Patch by Scott McNutt, 25 Apr 2004:
2147 Add Nios GDB/JTAG Console support:
2148 - Add stubs to support gdb via JTAG.
2149 - Add support for console over JTAG.
2150 - Minor cleanup.
2151
wdenk10767cc2004-05-13 13:23:58 +00002152* Add support for CATcenter board (based on PPChameleon ME module)
2153
wdenk02b11f82004-05-12 22:54:36 +00002154* Patch by Klaus Heydeck, 12 May 2004:
2155 Using external watchdog for KUP4 boards in mpc8xx/cpu.c;
2156 load_sernum_ethaddr() for KUP4 boards in lib_ppc/board.c;
2157 various changes to KUP4 board specific files
2158
wdenk6c1362c2004-05-12 22:18:31 +00002159* Fix minor network problem on MPC5200: need some delay between
2160 resetting the PHY and sending the first packet. Implemented in a
2161 "natural" way by invoking the PHY reset and initialization code
2162 only once after power on vs. each time the interface is brought up.
2163
wdenk9d9e2832004-05-11 21:53:55 +00002164* Add some limited support for low-speed devices to SL811 USB controller
2165 (at least "usb reset" now passes successfully and "usb info" displays
2166 correct information)
2167
wdenkbaac6072004-05-08 20:33:20 +00002168* Change init sequence for multiple network interfaces: initialize
2169 on-chip interfaces before external cards.
2170
wdenk32877d62004-05-05 19:44:41 +00002171* Fix memory leak in the NAND-specific JFFS2 code
2172
2173* Fix SL811 USB controller when attached to a USB hub
2174
wdenk62b4ac92004-05-05 08:31:53 +00002175* Fix config option spelling in PM520 config file
2176
2177* Fix PHY discovery problem in cpu/mpc8xx/fec.c (introduced by
2178 patches by Pantelis Antoniou, 30 Mar 2004)
2179
wdenk2729af92004-05-03 20:45:30 +00002180* Fix minor NAND JFFS2 related issue
2181
2182* Fixes for SL811 USB controller:
2183 - implement workaround for broken memory stick
2184 - improve error handling
2185
2186* Increase packet send timeout to 1 ms in cpu/mpc8xx/scc.c to better
2187 cope with congested networks.
2188
2189======================================================================
wdenk56b86bf2004-04-12 14:31:43 +00002190Changes for U-Boot 1.1.1:
2191======================================================================
wdenk507bbe32004-04-18 21:13:41 +00002192
wdenkfc1cfcd2004-04-25 15:41:35 +00002193* Patch by Travis Sawyer, 23 Apr 2004:
2194 Fix VSC/CIS 8201 phy descrambler interoperability timing due to
2195 errata from Vitesse Semiconductor.
wdenk0b8fa032004-04-25 14:37:29 +00002196
2197* Patch by Philippe Robin, 22 Apr 2004:
wdenk02b11f82004-05-12 22:54:36 +00002198 Fix ethernet configuration for "versatile" board
wdenk0b8fa032004-04-25 14:37:29 +00002199
2200* Patch by Kshitij Gupta, 21 Apr 2004:
2201 Remove busy loop and use MPU timer fr usleep() on OMAP1510/1610 boards
2202
2203* Patch by Steven Scholz, 24 Feb 2004:
2204 Fix a bug in AT91RM9200 ethernet driver:
2205 The MII interface is now initialized before accessing the PHY.
2206
wdenkb9711de2004-04-25 13:18:40 +00002207* Patch by John Kerl, 19 Apr 2004:
2208 Use U-boot's miiphy.h for PHY register names, rather than
2209 introducing a new header file.
2210
2211* Update pci_ids.h from linux-2.4.26
2212
2213* Patch by Masami Komiya, 19 Apr 2004:
2214 Fix problem cause by VLAN function on little endian architecture
2215 without VLAN environment
2216
wdenke9132ea2004-04-24 23:23:30 +00002217* Clean up the TQM8xx_YYMHz configurations; allow to use the same
wdenkb9711de2004-04-25 13:18:40 +00002218 binary image for all clock frequencies. Implement run-time
wdenke9132ea2004-04-24 23:23:30 +00002219 optimization of flash access timing based on the actual bus
2220 frequency.
2221
wdenk5cf91d62004-04-23 20:32:05 +00002222* Modify KUP4X board configuration to use SL811 driver for USB memory
2223 sticks (including FAT / VFAT filesystem support)
2224
2225* Add SL811 Host Controller Interface driver for USB
2226
2227* Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README
2228
2229* Patch by Pantelis Antoniou, 19 Apr 2004:
2230 Allow to use shell style syntax (i. e. ${var} ) with standard parser.
2231 Minor patches for Intracom boards.
2232
2233* Patch by Christian Pell, 19 Apr 2004:
2234 cleanup support for CF/IDE on PCMCIA for PXA25X
2235
wdenke35745b2004-04-18 23:32:11 +00002236* Temporarily disabled John Kerl's extended MII command code because
2237 "miivals.h" is missing
2238
2239* Patches by Mark Jonas, 13 Apr 2004:
2240 - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S
2241 - Add sync instructions to IceCube SDRAM init code
2242 - Move SDRAM chip constants into seperate include files
2243 - Unify DDR and SDR initialization code
2244 - Unify all IceCube (Lite5xxx) target names
2245
wdenk24711112004-04-18 22:57:51 +00002246* Patch by John Kerl, 16 Apr 2004:
2247 Enable ranges in mii command, e.g. mii read 0-1f 0 or
2248 mii read 4-7 18-1a. Also add mii dump subcommand for
2249 pretty-printing standard regs 0-5.
2250
2251* Patch by Stephen Williams, 16 April 2004:
2252 fix typo in JSE.h; update MAINTAINERS
2253
wdenk498b8db2004-04-18 22:26:17 +00002254* Patch by Matthew S. McClintock, 14 Apr 2004:
2255 fix initdram function for utx8245 board
2256
2257* Patch by Markus Pietrek, 14 Apr 2004:
2258 use ATAG_INITRD2 instead of deprecated ATAG_INITRD tag
2259
2260* Patch by Reinhard Meyer, 18 Apr 2004:
2261 provide the IDE Reset Function for EMK 5200 boards
2262
2263* Patch by Masami Komiya, 12 Apr 2004:
2264 fix pci_hose_write_config_{byte,word}_via_dword problems
2265
wdenka8bd82d2004-04-18 22:03:42 +00002266* Patch by Sangmoon Kim, 12 Apr 2004:
2267 Update max RAM size for debris board
2268
2269* Patch by Travis Sawyer, 08 Apr 2004:
2270 Add TLB entry for second DIMM slot on ocotea
2271
2272* Patch by Masami Komiya, 08 Apr 2004:
2273 add RTL8169 network driver
2274
wdenk7abf0c52004-04-18 21:45:42 +00002275* Patch by Dan Malek, 07 Apr 2004:
2276 - Add support for RPC/STx GP3, Motorola 8560 board
2277 - Update 85xx TSEC driver so it searches MII for first available PHY
2278 and uses that one.
2279 - Add functions to support console MII commands.
2280
2281* Patch by Tolunay Orkun, 07 Apr 2004:
wdenka8bd82d2004-04-18 22:03:42 +00002282 Move initialization of bi_iic_fast[]
wdenk7abf0c52004-04-18 21:45:42 +00002283 from board_init_f() to board_init_r()
2284
2285* Patch by Yasushi Shoji, 07 Apr 2004:
2286 Cleanup microblaze port
2287
2288* Patch by Sangmoon Kim, 07 Apr 2004:
2289 Add auto SDRAM module detection for Debris board
2290
wdenkd4326ac2004-04-18 21:17:30 +00002291* Patch by Rune Torgersen, 06 Apr 2004:
2292 - Fix some PCI problems on the MPC8266ADS board
2293 - Fix the location of some PCI entries in the immap structure
2294
wdenk507bbe32004-04-18 21:13:41 +00002295* Patch by Yasushi Shoji, 07 Apr 2004:
2296 - add support for microblaze processors
2297 - add support for AtmarkTechno "suzaku" board
2298
wdenk998eaae2004-04-18 19:43:36 +00002299* Configure PPChameleon board to use redundand environment in flash
2300
2301* Configure PPChameleon board to use JFFS2 NAND support.
2302
2303* Added support for JFFS2 filesystem (read-only) on top of NAND flash
2304
wdenk6e592382004-04-18 17:39:38 +00002305* Patch by Rune Torgersen, 16 Apr 2004:
2306 LBA48 fixes
wdenk56b86bf2004-04-12 14:31:43 +00002307
wdenkc26e4542004-04-18 10:13:26 +00002308* Patches by Pantelis Antoniou, 16 Apr 2004:
2309 - add support for a new version of an Intracom board and fix
2310 various other things on others.
2311 - add verify support to the crc32 command (define
2312 CONFIG_CRC32_VERIFY to enable it)
2313 - fix FEC driver for MPC8xx systems:
2314 1. fix compilation problems for boards that use dynamic
2315 allocation of DPRAM
2316 2. shut down FEC after network transfers
2317 - HUSH parser fixes:
2318 1. A new test command was added. This is a simplified version of
2319 the one in the bourne shell.
2320 2. A new exit command was added which terminates the current
2321 executing script.
2322 3. Fixed handing of $? (exit code of last executed command)
wdenk6e592382004-04-18 17:39:38 +00002323 - Fix some compile problems;
2324 add "once" functionality for the netretry variable
wdenkc26e4542004-04-18 10:13:26 +00002325
wdenkea66bc82004-04-15 23:23:39 +00002326* Patch by George G. Davis, 02 Apr 2004:
2327 add support for Intel Assabet board
2328
wdenkdb01a2e2004-04-15 23:14:49 +00002329* Patch by Stephen Williams, 01 Apr 2004:
2330 Add support for Picture Elements JSE board
2331
2332* Patch by Christian Pell, 01 Apr 2004:
2333 Add CompactFlash support for PXA systems.
2334
wdenk04a85b32004-04-15 18:22:41 +00002335* Patches by Pantelis Antoniou, 30 Mar 2004:
2336 - add auto-complete support to the U-Boot CLI
2337 - add support for NETTA and NETPHONE boards; fix NETVIA board
wdenk5a8c51c2004-04-15 21:16:42 +00002338 - add support for the Epson 156x series of graphical displays
2339 (These displays are serial and not suitable for using a normal
2340 framebuffer console on them)
2341 - add infrastructure needed in order to POST any DSPs in a board
wdenka6ab4bf2004-04-15 21:31:56 +00002342 - improve and fix various things in the MPC8xx FEC driver:
2343 1. The new 87x and 88x series of processors have two FECs,
2344 and the new driver supports them both.
2345 2. Another change in the 87x/88x series is support for
2346 the RMII (Reduced MII) interface. However numerous
2347 changes are needed to make it work since the PHYs
2348 are connected to the same lines. That means that
2349 you have to address them correctly over the MII
2350 interface.
2351 3. We now correctly match the MII/RMII interface
2352 configuration to what the PHY reports.
wdenka3d991b2004-04-15 21:48:45 +00002353 - Fix problem when readingthe MII status register. Due to the
2354 internal design of many PHYs you have to read the register
2355 twice. The problem is more apparent in 10Mbit mode.
2356 - add new mode ".jffs2s" for reading from a NAND device: it just
2357 skips over bad blocks.
2358 - add networking support for VLANs (802.1q), and CDP (Cisco
2359 Discovery Protocol)
wdenkbda6c8a2004-04-15 21:58:11 +00002360 - some minor patches / cleanup
wdenk04a85b32004-04-15 18:22:41 +00002361
2362* Patch by Yuli Barcohen, 28 Mar 2004:
2363 - Add support for MPC8272 family including MPC8247/8248/8271/8272
2364 - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS)
2365 - Change configuration method for MPC8260ADS family
2366
wdenkd716b122004-04-12 16:12:49 +00002367* add startup code to clear the BSS of standalone applications
2368
wdenk56b86bf2004-04-12 14:31:43 +00002369* Fix if / elif handling bug in HUSH shell
2370
2371======================================================================
wdenkf525c8a2004-04-10 20:44:51 +00002372Changes for U-Boot 1.1.0:
wdenkc83bf6a2004-01-06 22:38:14 +00002373======================================================================
2374
wdenk7e780362004-04-08 22:31:29 +00002375* Patch by Mark Jonas: Remove config.tmp files only when
2376 unconfiguring the board
2377
2378* Adapt RMU board for bigger flash memory
2379
wdenk0608e042004-03-25 19:29:38 +00002380* Patch by Klaus Heydeck, 13 Mar 2003:
2381 Add support for KUP4X Board
2382
wdenk518e2e12004-03-25 14:59:05 +00002383* Patch by Pavel Bartusek, 21 Mar 2004
2384 Add Reiserfs support
2385
2386* Patch by Hinko Kocevar, 20 Mar 2004
2387 - Add auto-release for SMSC LAN91c111 driver
2388 - Add save/restore of PTR and PNR regs as suggested in datasheet
2389
wdenk6fb6af62004-03-23 23:20:24 +00002390* Patch by Stephen Williams, 19 March 2004
2391 Increase speed of sector reads from SystemACE,
2392 shorten poll timeout and remove a useless reset
2393
2394* Patch by Tolunay Orkun, 19 Mar 2004:
2395 Make GigE PHY 1000Mbps Speed/Duplex detection conditional
2396 (CONFIG_PHY_GIGE)
2397
2398* Patch by Brad Kemp, 18 Mar 2004:
2399 prevent machine checks during a PCI scan
2400
2401* Patch by Pierre Aubert, 18 Mar 2004:
2402 Fix string cleaning in IDE identification
2403
wdenkeeb1b772004-03-23 22:53:55 +00002404* Patch by Pierre Aubert, 18 Mar 2004:
2405 - Unify video mode handling for Chips & Technologies 69000 Video
2406 chip and Silicon Motion SMI 712/710/810 Video chip
2407 - Add selection of the video output (CRT or LCD) via 'videoout'
2408 environment variable for the Silicon Motion
2409 - README update
2410
2411* Patch by Pierre Aubert, 18 Mar 2004:
2412 include/common.h typo fix
2413
2414* Patches by Tolunay Orkun, 17 Mar 2004:
2415 - Add support for bd->bi_iic_fast[] initialization via environment
2416 variable "i2cfast" (CONFIG_I2CFAST)
2417 - Add "i2cfast" u-boot environment variable support for csb272
2418
wdenk27aa8182004-03-23 22:37:33 +00002419* Patch by Carl Riechers, 17 Mar 2004:
2420 Ignore '\0' characters in console input for use with telnet and
2421 telco pads.
2422
2423* Patch by Leon Kukovec, 17 Mar 2004:
2424 typo fix for strswab prototype #ifdef
2425
wdenk4b9206e2004-03-23 22:14:11 +00002426* Patches by Thomas Viehweger, 16 Mar 2004:
2427 - show PCI clock frequency on MPC8260 systems
2428 - add FCC_PSMR_RMII flag for HiP7 processors
2429 - in do_jffs2_fsload(), take load address from load_addr if not set
2430 explicit, update load_addr otherwise
2431 - replaced printf by putc/puts when no formatting is needed
2432 (smaller code size, faster execution)
2433
wdenk109c0e32004-03-23 21:43:07 +00002434* Patch by Phillippe Robin, 16 Mar 2004:
2435 avoid dereferencing NULL pointer in lib_arm/armlinux.c
2436
2437* Patch by Stephen Williams, 15 Mar 2004:
2438 Fix CONFIG_SERIAL_SOFTWARE_FIFO documentation
2439
2440* Patch by Tolunay Orkun, 15 Mar 2004:
2441 Initialize bi_opbfreq to real OPB frequency via get_OPB_freq()
2442
2443* Patch by Travis Sawyer, 15 Mar 2004:
2444 Update CREDITS & MAINTAINERS files for PPC440GX & Ocotea port
2445
wdenkefa329c2004-03-23 20:18:25 +00002446* Add start-up delay to make sure power has stabilized before
2447 attempting to switch on USB on SX1 board.
2448
2449* Patch by Josef Wagner, 18 Mar 2004:
2450 - Add support for MicroSys XM250 board (PXA255)
2451 - Add support for MicroSys PM828 board (MPC8280)
2452 - Add support for 32 MB Flash on PM825/826
2453 - new SDRAM refresh rate for PM825/PM826
2454 - added support for MicroSys PM520 (MPC5200)
2455 - replaced Query by Identify command in CPU86/flash.c
2456 to support 28F160F3B
2457
2458* Fix wrap around problem with udelay() on ARM920T
2459
2460* Add support for Macronix flash on TRAB board
2461
wdenk7d7ce412004-03-17 01:13:07 +00002462* Patch by Pierre Aubert, 15 Mar 2004:
2463 Fix buffer overflow in IDE identification
2464
2465* Fix power-off of LCD for out-of-band temperatures on LWMON board
2466
2467* Remove redundand #define in IceCube.h
2468
wdenkd9df1f42004-03-15 09:00:01 +00002469* Patch by Steven Scholz, 27 Feb 2004:
2470 - Adding get_ticks() and get_tbclk() for AT91RM9200
2471 - Many white space fixes in cpu/at91rm9200/interrupts.c
2472
2473* Patches by Steven Scholz, 20 Feb 2004:
2474 some cleanup in AT91RM9200 related code
2475
wdenk855a4962004-03-14 18:23:55 +00002476* Patches by Travis Sawyer, 12 Mar 2004:
2477 - Fix Gigabit Ethernet support for 440GX
2478 - Add Gigabit Ethernet Support to MII PHY utilities
2479
2480* Patch by Brad Kemp, 12 Mar 2004:
2481 Fixes for drivers/cfi_flash.c:
2482 - Better support for x8/x16 implementations
2483 - Added failure for AMD chips attempting to use CFG_FLASH_USE_BUFFER_WRITE
2484 - Added defines for AMD command and address constants
2485
2486* Patch by Leon Kukovec, 12 Mar 2004:
2487 Fix get_dentfromdir() to correctly handle deleted dentries
wdenk42dfe7a2004-03-14 22:25:36 +00002488
wdenk855a4962004-03-14 18:23:55 +00002489* Patch by George G. Davis, 11 Mar 2004:
2490 Remove hard coded network settings in TI OMAP1610 H2
2491 default board config
2492
2493* Patch by George G. Davis, 11 Mar 2004:
2494 add support for ADS GraphicsClient+ board.
2495
wdenk7d7ce412004-03-17 01:13:07 +00002496* Patch by Pierre Aubert, 11 Mar 2004:
wdenk4b248f32004-03-14 16:51:43 +00002497 - add bitmap command and splash screen support in cfb console
2498 - add [optional] origin in the bitmap display command
2499
2500* Patch by Travis Sawyer, 11 Mar 2004:
2501 Fix ocotea board early init interrupt setup.
2502
2503* Patch by Thomas Viehweger, 11 Mar 2004:
2504 Remove redundand code; add PCI-specific bits to include/mpc8260.h
2505
wdenkaaf224a2004-03-14 15:20:55 +00002506* Patch by Stephan Linz, 09 Mar 2004
2507 - Add support for the SSV ADNP/ESC1 (Nios Softcore)
2508
2509* Patch by George G. Davis, 9 Mar 2004:
2510 fix recent build failure for SA1100 target
2511
2512* Patch by Travis Sawyer, 09 Mar 2004:
2513 Support native interrupt mode for the IBM440GX.
2514 Previously it was running in 440GP compatibility mode.
2515
wdenk3d3befa2004-03-14 15:06:13 +00002516* Patch by Philippe Robin, 09 Mar 2004:
2517 Added ARM Integrator AP, CP and Versatile PB926EJ-S Reference
2518 Platform support.
2519
2520* Patch by Masami Komiya, 08 Mar 2004:
2521 Don't overwrite server IP address or boot file name
2522 when the boot server does not return values
2523
wdenk7d7ce412004-03-17 01:13:07 +00002524* Patch by Tolunay Orkun, 5 Mar 2004:
wdenk3d3befa2004-03-14 15:06:13 +00002525 Removed compile time restriction on CFG_I2C_SPEED for DS1338 RTC
2526
wdenk4d13cba2004-03-14 14:09:05 +00002527* Patch by Tolunay Orkun, 5 Mar 2004:
2528 Fix early board initialization for Cogent CSB272 board
2529
2530* Patch by Ed Okerson, 3 Mar 2004:
2531 fix CFI flash writes for little endian systems
2532
2533* Patch by Reinhard Meyer, 01 Mar 2004:
2534 generalize USB and IDE support for MPC5200 with according
2535 changes to IceCube.h and TOP5200.h
2536 add Am29LV256 256 MBit FLASH support for TOP5200 boards
2537 add info about USB and IDE to README
2538
wdenkc3f9d492004-03-14 00:59:59 +00002539* Patch by Yuli Barcohen, 4 Mar 2004:
2540 Fix problems with GCC 3.3.x which changed handling of global
2541 variables explicitly initialized to zero (now in .bss instead of
2542 .data as before).
2543
2544* Patch by Leon Kukovec, 02 Mar 2004:
2545 add strswab() to fix IDE LBA capacity, firmware and model numbers
2546 on little endian machines
2547
2548* Patch by Masami Komiya, 02 Mar 2004:
2549 - Remove get_ticks() from NFS code
2550 - Add verification of RPC transaction ID
2551
2552* Patch by Pierre Aubert, 02 Mar 2004:
2553 cleanup for IDE and USB drivers for MPC5200
2554
2555* Patch by Travis Sawyer, 01 Mar 2004:
wdenk0e6d7982004-03-14 00:07:33 +00002556 Ocotea:
2557 - Add IBM PPC440GX Ref Platform support (Ocotea)
2558 Original code by Paul Reynolds <PaulReynolds@lhsolutions.com>
2559 Adapted to U-Boot and 440GX port
2560 440gx_enet.c:
2561 - Add gracious handling of all Ethernet Pin Selections for 440GX
2562 - Add RGMII selection for Cicada CIS8201 Gigabit PHY
2563 ppc440.h:
2564 - Add needed bit definitions
2565 - Fix formatting
2566
2567* Patch by Carl Riechers, 1 Mar 2004:
2568 Add PPC440GX prbdv0 divider to fix memory clock calculation.
2569
2570* Patch by Stephan Linz, 27 Feb 2004
2571 - avoid problems for targets without NFS download support
2572
wdenkc40b2952004-03-13 23:29:43 +00002573* Patch by Rune Torgersen, 27 Feb 2004:
2574 - Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA)
2575 - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF)
2576 - Added support for 64bit strtoul (CFG_64BIT_STRTOUL)
2577
2578* Patch by Masami Komiya, 27 Feb 2004:
2579 Fix rarpboot: add autoload by NFS
2580
2581* Patch by Dan Eisenhut, 26 Feb 2004:
2582 fix flash_write return value in saveenv
2583
2584* Patch by Stephan Linz, 11 Dec 2003
2585 expand config.mk to avoid trigraph warnings on NIOS
2586
2587* Rename "BMS2003" board into "HMI10"
2588
wdenk6629d2f2004-03-12 15:38:25 +00002589* SX1 patches: use "serial#" for USB serial #; use redundand environment
2590 storage; auto-set console on USB port (using preboot command)
2591
wdenk232c1502004-03-12 00:14:09 +00002592* Add support for SX1 mobile phone; add support for USB-based console
2593 (enable with "setenv stdout usbtty; setenv stdin usbtty")
2594
wdenk79d696f2004-03-11 22:46:36 +00002595* Fix LOWBOOT configuration for MPC5200 with DDR memory
2596
wdenkf8d813e2004-03-02 14:05:39 +00002597* Fix SDRAM timings for LITE5200 / IceCube board
2598
2599* Handle Auti-MDIX / connection status for INCA-IP
2600
2601* Fix USB problems when attempting to read 0 bytes
2602
wdenke7c85682004-02-27 08:21:54 +00002603* Patch by Travis Sawyer, 26 Feb 2004:
2604 Fix broken compile for XPEDITE1K target.
2605
2606* Patch by Stephan Linz, 26 Feb 2004:
2607 Bug fix for NFS code on NIOS targets
wdenk232c1502004-03-12 00:14:09 +00002608
wdenke7c85682004-02-27 08:21:54 +00002609* Patch by Stephen Williams, 26 Feb 2004:
2610 Break up SystemACE reads of large block counts
2611
wdenk132ba5f2004-02-27 08:20:54 +00002612* Patch by Pierre Aubert, 26 Feb 2004
2613 add IDE support for MPC5200
2614
2615* Patch by Masami Komiya, 26 Feb 2004:
2616 add autoload via NFS
2617
2618* Patch by Stephen Williams
2619 Use of CONFIG_SERIAL_SOFTWARE_FIFO in board.c consistent with uses
2620 elsewhere in the source.
2621
wdenk11dadd52004-02-27 00:07:27 +00002622* Patch by Steven Scholz, 25 Feb 2004:
2623 - Timeouts in FPGA code should be based on CFG_HZ
2624 - Minor cleanup in code for Altera FPGA ACEX1K
2625
2626* Patch by Steven Scholz, 25 Feb 2004:
2627 Changed "Directory Hierarchy" section in README
2628
2629* Patch by Masami Komiya, 25 Feb 2004:
2630 Reduce copy count in nfs_read_reply() of NFS code
2631
wdenk80885a92004-02-26 23:46:20 +00002632* Patch by Markus Pietrek, 24 Feb 2004:
2633 NS9750 DevBoard added
2634
wdenk132ba5f2004-02-27 08:20:54 +00002635* Patch by Pierre Aubert, 24 Feb 2004
wdenk80885a92004-02-26 23:46:20 +00002636 add USB support for MPC5200
2637
2638* Patch by Steven Scholz, 24 Feb 2004:
2639 - fix MII commands to use values from last command
2640
2641* Patch by Torsten Demke, 24 Feb 2004:
2642 Add support for the eXalion platform (SPSW-8240, F-30, F-300)
2643
wdenk0c852a22004-02-26 23:01:04 +00002644* Patch by Rahul Shanbhag, 19 Feb 2004:
2645 Fixes for for OMAP1610 board:
2646 - shift some IRQ specific code to platform.S file
2647 - remove duplicatewatchdog reset code from start.S
2648
2649* Make Auto-MDIX Support configurable on INCA-IP board
2650
2651* Fix license for mkimage tool
2652
wdenka084f7d2004-02-24 22:33:21 +00002653* Patch by Masami Komiya, 24 Feb 2004:
2654 Update NetBootFileXferSize in NFS code
2655
2656* Patch by Scott McNutt, 24 Feb 2004:
2657 fix packet length in NFS code
2658
wdenkcbd8a352004-02-24 02:00:03 +00002659* Patch by Masami Komiy, 22 Feb 2004:
2660 Add support for NFS for file download
2661
wdenk074cff02004-02-24 00:16:43 +00002662* Patch by Andrea Scian, 17 Feb 2004:
2663 Add support for S3C44B0 processor and DAVE B2 board
2664
2665* Patch by Steven Scholz, 20 Feb 2004:
2666 - Add support for MII commands on AT91RM9200 boards
2667 - some cleanup in AT91RM9200 ethernet code
2668
wdenk028ab6b2004-02-23 23:54:43 +00002669* Patch by Peter Ryser, 20 Feb 2004:
2670 Add support for the Xilinx ML300 platform
2671
2672* Patch by Stephan Linz, 17 Feb 2004:
2673 Fix watchdog support for NIOS
2674
2675* Patch by Josh Fryman, 16 Feb 2004:
2676 Fix byte-swapping for cfi_flash.c for different bus widths
2677
2678* Patch by Jon Diekema, 14 Jeb 2004:
2679 Remove duplicate "FPGA Support" notes from the README file
2680
wdenk63e73c92004-02-23 22:22:28 +00002681* Patches by Reinhard Meyer, 14 Feb 2004:
2682 - update board/emk tree; use common flash driver
2683 - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c
2684 [adapted for other PPC CPUs -- wd]
2685 - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c
2686
2687* Patch by Jon Diekema, 13 Feb 2004:
2688 Call show_boot_progress() whenever POST "FAILED" is printed.
2689
2690* Patch by Nishant Kamat, 13 Feb 2004:
2691 Add support for TI OMAP1610 H2 Board
2692 Fixes for cpu/arm926ejs/interrupt.c
2693 (based on Richard Woodruff's patch for arm925, 16 Oct 03)
2694 Fix for a timer bug in OMAP1610 Innovator
2695 Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2
2696
2697* Patches by Stephan Linz, 12 Feb 2004:
2698 - add support for NIOS timer with variable period preload counter value
2699 - prepare POST framework support for NIOS targets
2700
2701* Patch by Denis Peter, 11 Feb 2004:
2702 add POST support for the MIP405 board
2703
wdenkcd0a9de2004-02-23 20:48:38 +00002704* Patch by Laurent Mohin, 10 Feb 2004:
2705 Fix buffer overflow in common/usb.c
2706
2707* Patch by Tolunay Orkun, 10 Feb 2004:
2708 Add support for Cogent CSB272 board
2709
wdenk2d1a5372004-02-23 19:30:57 +00002710* Patch by Thomas Elste, 10 Feb 2004:
2711 Add support for NET+50 CPU and ModNET50 board
2712
2713* Patch by Sam Song, 10 Feb 2004:
2714 Fix typos in cfi_flash.c
2715
2716* Patch by Leon Kukovec, 10 Feb 2004
2717 Fixed long dir entry slot id calculation in get_vfatname
2718
2719* Patch by Robin Gilks, 10 Feb 2004:
2720 add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==,
2721 !=, <>, <, >, <=, >=)
2722
wdenk3f85ce22004-02-23 16:11:30 +00002723* Fix problem with side effects in macros in include/usb.h
2724
2725* Patch by David Benson, 13 Nov 2003:
2726 bug 841358 - fix TFTP download size limit
2727
2728* Fixing bug 850768:
2729 improper flush_cache() in load_serial()
2730
2731* Fixing bug 834943:
2732 MPC8540 - missing volatile declarations
2733
2734* Patch by Stephen Williams, 09 Feb 2004:
2735 Add support for Xilinx SystemACE chip:
2736 - New files common/cmd_ace.c and include/systemace.h
2737 - Hook systemace support into cmd_fat and the partition manager
2738
2739* Patch by Travis Sawyer, 09 Feb 2004:
2740 Add bi_opbfreq & bi_iic_fast to 440GX bd_info as needed for Linux
2741
wdenk3c74e322004-02-22 23:46:08 +00002742* Patch by Travis Sawyer, 09 Feb 2004:
2743 o 440GX:
2744 - Fix PCI Indirect access for type 1 config cycles with ppc440.
2745 - Add phymode for 440 enet
2746 - fix pci pre init
2747 o XPedite1K:
2748 - Change board_pre_init to board_early_init_f
2749 - Add user flash to bus controller setup
2750 - Fix pci pre init
2751 - Fix is_pci_host to check GPIO for monarch bit
2752 - Force xpedite1k to pci conventional mode (via #define option)
2753
2754* Patch by Brad Kemp, 4 Feb 2004:
2755 - handle the machine check that is generated during the PCI scans
2756 on 82xx processors.
2757 - define the registers used in the IMMR by the PCI subsystem.
2758
2759* Patch by Pierre Aubert, 03 Feb 2004:
2760 cpu/mpc5xxx/start.S: copy MBAR into SPR311
2761
2762* Patch by Jeff Angielski, 03 Feb 2004:
2763 Fix copy & paste error in cpu/mpc8260/pci.c
2764
2765* Patch by Reinhard Meyer, 24 Jan 2004:
2766 Fix typo in cpu/mpc5xxx/pci_mpc5200.c
2767
wdenkcf56e112004-02-20 22:02:48 +00002768* Add Auto-MDIX support for INCA-IP
2769
wdenkbf9e3b32004-02-12 00:47:09 +00002770* Some code cleanup
2771
2772* Patch by Josef Baumgartner, 10 Feb 2004:
2773 Fixes for Coldfire port
2774
2775* Patch by Brad Kemp, 11 Feb 2004:
2776 Fix CFI flash driver problems
2777
wdenka2d18bb2004-02-11 21:35:18 +00002778* Make sure to use a bus clock divider of 2 only when running TQM8xxM
2779 modules at CPU clock frequencies above 66 MHz.
wdenkbf9e3b32004-02-12 00:47:09 +00002780
wdenka2d18bb2004-02-11 21:35:18 +00002781* Optimize flash programming speed for LWMON (by another 100% :-)
2782
wdenkcd37d9e2004-02-10 00:03:41 +00002783* Patch by Jian Zhang, 3 Feb 2004:
2784 - Changed the incorrect FAT12BUFSIZE
2785 - data_begin in fsdata can be negative. Changed it to be short.
2786
wdenkec4c5442004-02-09 23:12:24 +00002787* Patches by Stephan Linz, 30 Jan 2004:
2788 1: - board/altera/common/flash.c:flash_erase():
2789 o allow interrupts befor get_timer() call
2790 o check-up each erased sector and avoid unexpected timeouts
2791 - board/altera/dk1c20/dk1s10.c:board_early_init_f():
2792 o enclose sevenseg_set() in cpp condition
2793 - remove the ASMI configuration for DK1S10_standard_32 (never present)
2794 - fix some typed in mistakes in the NIOS documentation
2795 2: - split DK1C20 configuration into several header files:
2796 o two new files for each NIOS CPU description
2797 o U-Boot related part is remaining in DK1C20.h
2798 3: - split DK1S10 configuration into several header files:
2799 o two new files for each NIOS CPU description
2800 o U-Boot related part is remaining in DK1S10.h
2801 4: - Add support for the Microtronix Linux Development Kit
2802 NIOS CPU configuration at the Altera Nios Development Kit,
2803 Stratix Edition (DK-1S10)
2804 5: - Add documentation for the Altera Nios Development Kit,
2805 Stratix Edition (DK-1S10)
2806 6: - Add support for the Nios Serial Peripharel Interface (SPI)
2807 (master only)
2808 7: - Add support for the common U-Boot SPI framework at
2809 RTC driver DS1306
2810
wdenkb98fff12004-02-09 20:51:26 +00002811* Patch by Rahul Shanbhag, 28 Jan 2004:
2812 Fix flash protection/locking handling for OMAP1610 innovator board.
2813
2814* Patch by Rolf Peukert, 28 Jan 2004:
2815 fix flash write problems on CSB226 board (write with 32 bit bus width)
2816
2817* Patches by Mark Jonas, 16 Jan 2004:
2818 - fix rounding error when calculating baudrates for MPC5200 PSCs
2819 - make sure CFG_RAMBOOT and CFG_LOWBOOT are not enabled at the same
2820 time which is not supported
2821
wdenk5653fc32004-02-08 22:55:38 +00002822* Patch by Yuli Barcohen, 26 Jan 2004:
2823 Allow bzip2 compression for small memory footprint boards
2824
2825* Patch by Brad Kemp, 21 Jan 2004:
2826 Add support for CFI flash driver for both the Intel and the AMD
2827 command sets.
2828
2829* Patch by Travis Sawyer, 20 Jan 2004:
2830 Fix pci bridge auto enumeration of sibling p2p bridges.
2831
2832* Patch by Tolunay Orkun, 12 Jan 2004:
2833 Add some delays as needed for Intel LXT971A PHY support
2834
2835* Patches by Stephan Linz, 09 Jan 2004:
2836 - avoid warning: unused variable `piop' in board/altera/common/sevenseg.c
2837 - make DK1C20 board configuration related to ASMI conform to
2838 documentation
2839
wdenkf6e20fc2004-02-08 19:38:38 +00002840* Patch by Anders Larsen, 09 Jan 2004:
2841
2842 ARM memory layout fixes: the abort-stack is now set up in the
2843 correct RAM area, and the BSS is zeroed out as it should be.
2844
2845 Furthermore, the magic variables 'armboot_end' and 'armboot_end_data'
2846 of the linker scripts are replaced by '__bss_start' and '_end',
2847 resp., which is a further step to eliminate unnecessary differences
2848 between the implementation of the CPU architectures.
2849
wdenkf4863a72004-02-07 01:27:10 +00002850* Patch by liang a lei, 9 Jan 2004:
2851 Fix Intel 28F128J3 ID in include/flash.h
2852
2853* Patch by Masami Komiya, 09 Jan 2004:
2854 add support for TB0229 board (NEC VR4131 MIPS processor)
2855
2856* Patch by Leon Kukovec, 12 Dec 2003:
2857 changed extern __inline__ into static __inline__ in
2858 include/linux/byteorder/swab.h
2859
wdenkba56f622004-02-06 23:19:44 +00002860* Patch by Travis Sawyer, 30 Dec 2003:
2861 Add support for IBM PPC440GX. Multiple EMAC Ethernet devices,
2862 select MDI port based on enabled EMAC device.
2863 Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX
2864 base PrPMC board.
2865
wdenka6cccae2004-02-06 21:48:22 +00002866* Patch by Wolter Kamphuis, 15 Dec 2003:
2867 made CONFIG_SILENT_CONSOLE usable on all architectures
2868
2869* Disable date command on TQM866M - there is no RTC on MPC866
2870
wdenk75d1ea72004-01-31 20:06:54 +00002871* Fix variable CPU clock for MPC859/866 systems for low CPU clocks
2872
wdenk68766092004-01-29 09:22:58 +00002873* Implement adaptive SDRAM timing configuration based on actual CPU
2874 clock frequency for INCA-IP; fix problem with board hanging when
2875 switching from 150MHz to 100MHz
2876
2877* Add PCMCIA CS support for BMS2003 board
2878
wdenkc178d3d2004-01-24 20:25:54 +00002879* Add variable CPU clock for MPC859/866 systems (so far only TQM866M):
2880 see doc/README.MPC866 for details;
2881 implement workaround for "SIU4" and "SIU9" silicon bugs on MPC866;
2882 calculate CPU clock frequency from PLL register values.
2883
2884* Add support for 128 MB RAM on TQM8xxL/M modules
2885
wdenkef978732004-01-21 20:46:28 +00002886* Fix PS/2 keyboard problem caused by statically initialized variable
2887 pointing to a location in flash
2888
2889* Fix INCA-IP clock calculation: 400/3 = 133.3 MHz, not 130.
2890
wdenkc837dcb2004-01-20 23:12:12 +00002891* The PS/2 mux on the BMS2003 board needs 450 ms after power on
2892 before we can access it; add delay in case we are faster (with no
2893 CF card inserted)
2894
2895* Cleanup of some init functions
2896
2897* Make sure SCC Ethernet is always stopped by the time we boot Linux
2898 to avoid Linux crashes by early packets coming in.
2899
2900* Accelerate flash accesses on LWMON board by using buffered writes
2901
wdenkb0aef112004-01-18 18:21:54 +00002902* Fix typo in Makefile;
2903 fix problem with PARTNUM detection
2904
wdenk1c437712004-01-16 00:30:56 +00002905* Patch by Reinhard Meyer, 09 Jan 2004:
2906 - add RTC support for MPC5200 based boards (requires RTC_XTAL)
2907
2908* Add support for IDE LED on BMS2003 board
2909 (exclusive with status LED!)
2910
2911* Add support for PS/2 keyboard (used with PS/2 multiplexor on
2912 BMS2003 board)
2913
2914* Patches by Reinhard Meyer, 4 Jan 2004 + 7 Jan 2004:
2915 Add common files for "emk" boards
2916
wdenkc83bf6a2004-01-06 22:38:14 +00002917* Add a common get_ram_size() function and modify the the
2918 board-specific files to invoke that common implementation.
2919
2920======================================================================
wdenkb34ff812004-01-06 11:13:56 +00002921Changes for U-Boot 1.0.1:
wdenk5cf9da42003-11-07 13:42:26 +00002922======================================================================
2923
wdenkb34ff812004-01-06 11:13:56 +00002924* Set default clock for INCA-IP to 150 MHz
2925
wdenka522fa02004-01-04 22:51:12 +00002926* Make BMS2003 use a separate config file to avoid #ifdef mess;
2927 add I2C support; add support for DS1337 RTC
2928
2929* Add CompactFlash support for BMS2003 board
2930
2931* Add support for status LED on BMS2003 board
2932
wdenk180d3f72004-01-04 16:28:35 +00002933* Patch by Scott McNutt, 02 Jan 2004:
2934 Add support for the Nios Active Serial Memory Interface (ASMI)
2935 on Cyclone devices
2936
2937* Patch by Andrea Marson, 16 Dec 2003:
2938 Add support for the PPChameleon ME and HI modules
2939
2940* Patch by Yuli Barcohen, 22 Dec 2003:
2941 Add support for Motorola DUET ADS board (MPC87x/88x)
2942
wdenkdd875c72004-01-03 21:24:46 +00002943* Patch by Robert Schwebel, 15 Dec 2003:
2944 add support for cramfs (uses JFFS2 command interface)
2945
wdenkc935d3b2004-01-03 19:43:48 +00002946* Patches by Stephan Linz, 11 Dec 2003:
2947 - more documentation for NIOS port
2948 - new struct nios_pio_t, struct nios_spi_t
2949 - Reconfiguration for NIOS Development Kit DK1C20:
2950 o move board related code from board/dk1c20
2951 to board/altera/dk1c20
2952 o create a new common source path board/altera/common
2953 and move generic flash access stuff into it
2954 o change/expand configuration file DK1C20.h
2955 - Add support for NIOS Development Kit DK1S10
2956 - Add status LED support for NIOS systems
2957 - Add dual 7-segment LED support for Altera NIOS DevKits
2958
wdenk3a473b22004-01-03 00:43:19 +00002959* Patch by Ronen Shitrit, 10 Dec 2003:
2960 Add support for the Marvell DB64360 / DB64460 development boards
2961
2962* Patch by Detlev Zundel, 10 Dec 2003:
2963 fix dependency problem in examples/Makefile
2964
wdenkb6e4c402004-01-02 16:05:07 +00002965* Patch by Denis Peter, 8 Dec 2003
2966 - add support for the PATI board (MPC555)
2967 - add SPI support for the MPC5xx
2968
2969* Patch by Anders Larsen, 08 Dec 2003:
2970 add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG
2971 to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target;
2972 cleanup some redundand #defines
2973
wdenk63f34912004-01-02 15:01:32 +00002974* Patch by André Schwarz, 8 Dec 2003:
2975 fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM):
2976 - TX and RX deskriptors must be quad-word aligned
2977 - does not work with only one TX deskriptor
2978 - standard reset method does not work
2979
2980* Patch by Masami Komiya, 08 Dec 2003:
2981 add RTL8139 ethernet driver
2982
2983* Patches by Ed Okerson, 07 Dec 2003:
2984 - fix ethernet for the AU1x00 processors in little-endian mode.
2985 - extend memsetup.S for the AU1x00 processors in BE and LE modes
2986
wdenkd4ca31c2004-01-02 14:00:00 +00002987* Minor code cleanup (coding style)
2988
2989* Patch by Reinhard Meyer, 30 Dec 2003:
2990 - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE,
2991 - added CONFIG_PHY_ADDR to include/configs/IceCube.h,
2992 - turned debug print of PHY registers into a function (called in two places)
2993 - added support for EMK MPC5200 based modules
2994
2995* Fix MPC8xx PLPRCR_MFD_SHIFT typo
2996
2997* Add support for TQM866M modules
2998
2999* Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash)
3000
3001* Fix a few compiler warnings
3002
wdenkc1896002003-12-28 11:44:59 +00003003* Patch by Reinhard Meyer, 28 Dec 2003:
3004 Add initial support for TOP5200 board
3005
wdenk7cb22f92003-12-27 19:24:54 +00003006* Make CPU clock on ICA-IP board controllable by a "cpuclk"
3007 environment variable which can set to "100", "133", or "150". The
3008 CPU clock will be configured accordingly upon next reboot. Other
3009 values are ignored. In case of an invalid or undefined "cpuclk"
3010 value, the compile-time default CPU clock speed will be used.
3011
3012* Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
3013 window that is used to access the UART registers by the Linux driver)
3014
3015* Patch by Reinhard Meyer, 20 Dec 2003:
3016 Fix clock calculation for the MPC5200 for higher clock frequencies
3017 (above 2**32 / 10 = 429.5 MHz).
3018
3019* Fix CONFIG_PLL_PCI_TO_MEM_MULTIPLIER divider error in SP8240 configuration
3020
wdenkb2001f22003-12-20 22:45:10 +00003021* Fix IceCube CLKIN configuration (it's 33.000000MHz)
3022
3023* Add new configuration for IceCube board with DDR memory
3024
3025* Update TRAB memory configurations
3026
wdenk5c745d22003-12-12 00:02:26 +00003027* Add JFFS2 support for INCA-IP board
3028
stroesed4f58f72003-12-09 15:04:55 +00003029* Patch by Bill Hargen, 09 Dec 2003:
3030 - BUBINGA405EP: changed flash driver to protect top sector containing
3031 first instruction.
3032 - BUBINGA405EP: configured "eeprom" command to access boot config EEPROM.
3033 - BUBINGA405EP: fixed PLL init (init chip selects before FPGA/NVRAM access).
3034 - 405EP: fixed SPD-based SDRAM init (only use banks 0 and 1).
3035 - 405EP: added/fixed support for "reginfo" command.
3036 - 4xx: removed spurious MII error messages on "mii info" command.
3037
wdenk4e5ca3e2003-12-08 01:34:36 +00003038* Patch by Bernhard Kuhn, 28 Nov 2003:
3039 add support for Coldfire CPU
3040 add support for Motorola M5272C3 and M5282EVB boards
3041
wdenk9fd5e312003-12-07 23:55:12 +00003042* Patch by Pierre Aubert, 24 Nov 2003:
3043 - add a return value for the fpga command
3044 - add ide_preinit() function called in ide_init if CONFIG_IDE_PREINIT
3045 is defined. If ide_preinit fails, ide_init is aborted.
3046 - fix an endianess problem in fat.h
3047
wdenk3bbc8992003-12-07 22:27:15 +00003048* Patch by Wolter Kamphuis, 05 Dec 2003:
3049 Add support for SNMC's QS850/QS823/QS860T boards
3050
wdenkb028f712003-12-07 21:39:28 +00003051* Patch by Yuli Barcohen, 3 Dec 2003:
3052 "revive" U-Boot support for old Motorola MPC860ADS board
3053
3054* Patch by Cam(ilo?), 03 Dec 2003:
3055 make examples build even with broken Montavista objcopy
3056
3057* Patch by Pavel Bartusek, 27 Nov 2003:
3058 fix conversion problem with "bootretry" evironment variable
3059
wdenkb4676a22003-12-07 19:24:00 +00003060* Patch by Andre Schwarz, 24 Nov 2003:
3061 add support for mvblue (mvBlueLYNX and mvBlueBOX) boards
3062
3063* Patch by Pavel Bartusek, 21 Nov 2003:
3064 set ZMII bridge speed on 440
3065
3066* Patch by Anders Larsen, 17 Nov 2003:
3067 Fix mismatched #ifdef / #endif in include/asm-arm/arch-pxa/hardware.h
3068
wdenka2663ea2003-12-07 18:32:37 +00003069* Patches by David Müller, 14 Nov 2003:
3070 - board/mpl/common/common_util.c
3071 * implement support for BZIP2 compressed images
3072 * various cleanups (printf -> puts, ...)
3073 - board/mpl/common/flash.c
3074 * report correct errors to upper layers
3075 * check the erase fail and VPP low bits in status reg
3076 - board/mpl/vcma9/cmd_vcma9.c
3077 - board/mpl/vcma9/flash.c
3078 * various cleanups (printf -> puts, ...)
3079 - common/cmd_usb.c
3080 * fix typo in comment
3081 - cpu/arm920t/usb_ohci.c
3082 * support for S3C2410 is missing in #if line
3083 - drivers/cs8900.c
3084 * reinit some registers in case of error (cable missing, ...)
3085 - fs/fat/fat.c
3086 * support for USB/MMC devices is missing in #if line
3087 - include/configs/MIP405.h
3088 - include/configs/PIP405.h
3089 * enable BZIP2 support
3090 * enlarge malloc space to 1MiB because of BZIP2 support
3091 - include/configs/VCMA9.h
3092 * enable BZIP2 support
3093 * enlarge malloc space to 1MiB because of BZIP2 support
3094 * enable USB support
3095 - lib_arm/armlinux.c
3096 * change calling convention of ARM Linux kernel as
3097 described on http://www.arm.linux.org.uk/developer/booting.php
3098
3099* Patch by Thomas Lange, 14 Nov 2003:
3100 Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to
3101 support all these AMD boards.
3102
3103* Patch by Thomas Lange, 14 Nov 2003:
3104 Workaround for mips au1x00 physical memory accesses (the au1x00
3105 uses a 36 bit bus internally and cannot access physical memory
3106 directly. Use the uncached SDRAM address instead of the physical
3107 one.)
3108
wdenkef5a9672003-12-07 00:46:27 +00003109* Patch by Xue Ligong (Joe), 13 Nov 2003:
3110 add Realtek 8019 ethernet driver
3111
3112* Patch by Yuli Barcohen, 13 Nov 2003:
3113 MPC826xADS/PQ2FADS cleanup
3114
3115* Patch by Anders Larsen, 12 Nov 2003:
3116 Update README to mark the PORTIO commands non-standard
3117
wdenk5779d8d2003-12-06 23:55:10 +00003118* Patch by Nicolas Lacressonnière, 12 Nov 2003:
3119 update for for Atmel AT91RM9200DK development kit:
3120 - support for environment variables in DataFlash
3121 - Atmel DataFlash AT45DB1282 support
3122
3123* Patch by Jeff Carr, 11 Nov 2003:
3124 add support for new version of 8270 processors
3125
3126* Patches by George G. Davis, 05 Nov 2003:
3127 - only pass the ARM linux initrd tag to the kernel when an initrd
3128 is actually present
3129 - update omap1510inn configuration file
3130
wdenk8bf3b002003-12-06 23:20:41 +00003131* Patches by Stephan Linz, 3 Nov 2003:
3132 - more endianess fixes for LAN91C111 driver
3133 - CFG_HZ configuration patch for NIOS Cyclone board
3134
3135* Patch by Stephan Linz, 28 Oct 2003:
3136 fix PHY_INT_REG vs. PHY_MASK_REG bug in drivers/smc91111.c
3137
3138* Patch by Steven Scholz, 20 Oct 2003:
3139 - make "mii info <addr>" show infor for PHY at "addr" only
3140 - Endian fix for miiphy_info()
3141
wdenka8c7c702003-12-06 19:49:23 +00003142* Patch by Gleb Natapov, 19 Sep 2003:
3143 Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c
3144
3145* Patch by Anders Larsen, 17 Sep 2003:
3146 Bring ARM memory layout in sync with the documentation:
3147 stack and malloc-heap are now located _below_ the U-Boot code
3148
wdenkfa1399e2003-12-06 11:20:01 +00003149* Accelerate booting on TRAB board: read and check autoupdate image
3150 headers first instead of always reading the whole images.
3151
wdenkb96619a2003-12-05 21:08:38 +00003152* Fix type in MPC5XXX code (pointed out by Victor Wren)
3153
wdenkaf6d1df2003-12-03 23:53:42 +00003154* Enabled password check on RMU board
3155
3156* Fix configuration problem with IceCube in LOWBOOT configuration:
3157 envrionment got embedded, corrupting the image layout.
3158
3159* Fix NEC display names (it's 6440 [for 640x480], not 6640).
3160
wdenkfd3103b2003-11-25 16:55:19 +00003161* Added BMS2003 board
3162 add support for NEC NL6448BC33-54. 10.4", 640x480 TFT display
3163
wdenkb4757ce2003-11-17 21:45:27 +00003164* Fix flash driver for TRAB board (must use Unlock Bypass Reset
3165 command to exit Unlock Bypass Mode); adjust timings for flash, SRAM
3166 and CPLD
3167
wdenk5bb226e2003-11-17 21:14:37 +00003168* Use "-fPIC" instead of "-mrelocatable" to prevent problems with
3169 recent tools
3170
3171* Add checksum verification to 'imls' command
3172
3173* Add bd_info fields needed for 4xx Linux I2C driver
3174
3175* Patch by Martin Krause, 4 Nov. 2003:
3176 Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap)
3177
3178* Print used network interface when CONFIG_NET_MULTI is set
3179
wdenk5cf9da42003-11-07 13:42:26 +00003180* Patch by Bernhard Kuhn, 28 Oct 2003:
3181 Add low boot support for MPC5200
3182
3183* Fix problem with dual PCMCIA support (NSCU)
3184
3185* Fix MPC5200 I2C initialization function
3186
3187======================================================================
wdenka43278a2003-09-11 19:48:06 +00003188Changes for U-Boot 1.0.0:
3189======================================================================
3190
wdenkb13fb012003-10-30 21:49:38 +00003191* Fix parameter passing to standalone images with bootm command
3192
3193* Patch by Kyle Harris, 30 Oct 2003:
3194 Fix build errors for ixdp425 board
3195
3196* Patch by David M. Horn, 29 Oct 2003:
3197 Fixes to build under CYGWIN
3198
3199* Get IceCube MGT5100 working (again)
3200
wdenk5fa66df2003-10-29 23:18:55 +00003201* Fix problems in memory test on some boards (which was not
3202 non-destructive as intended)
3203
3204* Patch by Gary Jennejohn, 28 Oct 2003:
3205 Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack
3206 to prevent stack overflow on ARM systems
3207
wdenka0f2fe52003-10-28 09:14:21 +00003208* Patch by Stephan Linz, 28 Oct 2003:
3209 fix init sequence error for NIOS port
3210
3211* Allow lowercase spelling for IceCube_5200; support MPC5200LITE name
3212
3213* Add CONFIG_VERSION_VARIABLE to TRAB configuration
3214
wdenka57a4962003-10-26 22:52:58 +00003215* Patch by Xiao Xianghua, 23 Oct 2003:
3216 small patch for mpc85xx
3217
3218* Fix small problem in MPC5200 I2C driver
3219
3220* Fix FCC3 support on ATC board
3221
dzu8cb81432003-10-24 13:14:45 +00003222* Correct header printing for multi-image files in do_bootm()
3223
3224* Make CONFIG_SILENT_CONSOLE work with CONFIG_AUTOBOOT_KEYED
3225
wdenk4654af22003-10-22 09:00:28 +00003226* Fix PCI problems on PPChameleon board
3227
wdenka3ad8e22003-10-19 23:22:11 +00003228* Patch by Steven Scholz, 18 Oct 2003:
3229 Fix AT91RM9200 ethernet driver
3230
3231* Patch by Nye Liu, 17 Oct 2003:
3232 Fix typo in include/mpc8xx.h
3233
3234* Patch by Richard Woodruff, 16 Oct 03:
3235 Fixes for cpu/arm925/interrupt.c
3236 - Initialize timestamp & lastdec vars.
3237 - fix timestamp overflows.
3238 - fix lastdec overflow.
3239 - smarter normalization to allow udelay() below 1ms to work.
3240
3241* Patch by Scott McNutt, 16 Oct
3242 add networking support for the Altera Nios Development Kit,
3243 Cyclone Edition (DK-1C20)
3244
3245* Patch by Jon Diekema, 14 Oct 2003:
3246 add hint about doc/README.silent to README file
3247
dzue7df0292003-10-19 21:43:26 +00003248* Add CompactFlash support for NSCU
3249
wdenkd7281f42003-10-19 22:30:08 +00003250* Fix PCI problems on PPChameleonEVB
3251
wdenk3d1e8a92003-10-16 12:53:35 +00003252* TRAB auto-update: Base decision if we have to strip the image
3253 header on image type as encoded in the header
wdenkd7281f42003-10-19 22:30:08 +00003254 (include image type patch by Martin Krause, 17 Oct 2003)
wdenk3d1e8a92003-10-16 12:53:35 +00003255
wdenk42d1f032003-10-15 23:53:47 +00003256* Patches by Xianghua Xiao, 15 Oct 2003:
3257
3258 - Added Motorola CPU 8540/8560 support (cpu/85xx)
3259 - Added Motorola MPC8540ADS board support (board/mpc8540ads)
3260 - Added Motorola MPC8560ADS board support (board/mpc8560ads)
3261
3262* Fix flash timings on TRAB board
3263
wdenk2d5b5612003-10-14 19:43:55 +00003264* Make sure HUSH is initialized for running auto-update scripts
3265
3266* Make 5200 reset command _really_ reset the board, without running
3267 any other code after it
3268
3269* Fix errors with flash erase when range spans across banks
3270 that are mapped in reverse order
3271
3272* Fix flash mapping and display on P3G4 board
3273
3274* Patch by Kyle Harris, 15 Jul 2003:
3275 - add support for Intel IXP425 CPU
3276 - add support for IXDP425 eval board
3277
wdenkf72da342003-10-10 10:05:42 +00003278* Added config option CONFIG_SILENT_CONSOLE. See doc/README.silent
3279 for more information
3280
wdenk5da627a2003-10-09 20:09:04 +00003281* Patch by Steven Scholz, 10 Oct 2003
3282 - Add support for Altera FPGA ACEX1K
3283
wdenk15647dc2003-10-09 19:00:25 +00003284* Patches by Thomas Lange, 09 Oct 2003:
3285 - fix cmd_ide.c for non ppc boards (read/write functions did not
3286 add ATA base address)
3287 - fix for shannon board
3288 - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code
wdenk5da627a2003-10-09 20:09:04 +00003289 - Endian swap ATA identity for all big endian CPUs, not just PPC
3290 - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize
3291 args to linux
3292 - add support for dbau1x00 board (MIPS32)
wdenk15647dc2003-10-09 19:00:25 +00003293
3294* Patch by Sangmoon Kim, 07 Oct 2003:
3295 add support for debris board
3296
wdenka0ff7f22003-10-09 13:16:55 +00003297* Patch by Martin Krause, 09 Oct 2003:
3298 Fixes for TRAB board
3299 - /board/trab/rs485.c: correct baudrate
wdenk42d1f032003-10-15 23:53:47 +00003300 - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in
wdenka0ff7f22003-10-09 13:16:55 +00003301 udelay(); fix some timing problems with adc controller
3302 - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power;
3303 modify commands: touch and buzzer
3304
3305* Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE
3306 (quick & dirty workaround for rogue pointer problem in get_vfatname());
3307 Use direct function calls for auto_update instead of hush commands
3308
wdenk4a551702003-10-08 23:26:14 +00003309* Patch by Scott McNutt, 04 Oct 2003:
3310 - add support for Altera Nios-32 CPU
3311 - add support for Nios Cyclone Development Kit (DK-1C20)
3312
3313* Patch by Steven Scholz, 29 Sep 2003:
3314 - A second parameter for bootm overwrites the load address for
3315 "Standalone Application" images.
3316 - bootm sets environment variable "filesize" to the resulting
3317 (uncompressed) data length for "Standalone Application" images
3318 when autostart is set to "no". Now you can do something like
3319 if bootm $fpgadata $some_free_ram ; then
3320 fpga load 0 $some_free_ram $filesize
3321 fi
3322
3323* Patch by Denis Peter, 25 Sept 2003:
3324 add support for the MIP405 Rev. C board
3325
wdenk54387ac2003-10-08 22:45:44 +00003326* Patch by Yuli Barcohen, 25 Sep 2003:
3327 add support for Zephyr Engineering ZPC.1900 board
3328
3329* Patch by Anders Larsen, 23 Sep 2003:
3330 add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
3331 implemented for the x86 architecture)
3332
wdenkfc3e2162003-10-08 22:33:00 +00003333* Patch by Sangmoon Kim, 23 Sep 2003:
3334 fix pll_pci_to_mem_multiplier table for MPC8245
3335
3336* Patch by Anders Larsen, 22 Sep 2003:
3337 enable timed autoboot on PXA
3338
3339* Patch by David Müller, 22 Sep 2003:
wdenkfc3e2162003-10-08 22:33:00 +00003340 - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
3341 returns correct libgcc file path
3342 - "latency" reduction of busy-loop waiting to improve "U-Boot" boot
3343 time on s3c24x0 systems
3344
3345* Patch by Jon Diekema, 19 Sep 2003:
3346 - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
3347 link state to the fault LED.
3348 - In NetLoop, make the Fault LED reflect the link status. The link
3349 status gets updated on entry, and on timeouts.
wdenk42d1f032003-10-15 23:53:47 +00003350
wdenkef1464c2003-10-08 22:14:02 +00003351* Patch by Anders Larsen, 18 Sep 2003:
3352 allow mkimage to build and run on Cygwin-hosted systems
3353
3354* Patch by Frank Müller, 18 Sep 2003:
3355 use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
3356 cpu/mpc8xx/fec.c
3357
3358* Patch by Pantelis Antoniou, 16 Sep 2003:
3359 add tool to compute fileds in the PLPRCR register for MPC86x
3360
wdenkd9a405a2003-10-07 20:01:55 +00003361* Use IH_TYPE_FILESYSTEM for TRAB "disk" images.
3362
wdenk147031a2003-10-07 10:33:38 +00003363* Fix build problems under FreeBSD
3364
wdenk887b3722003-10-06 22:00:45 +00003365* Add generic filesystem image type
3366
wdenkfbe4b5c2003-10-06 21:55:32 +00003367* Make fatload set filesize environment variable
3368
3369* enable basic / medium / high-end configurations for PPChameleonEVB
3370 board; fix NAND code
3371
3372* enable TFTP client code to specify to the server the desired
3373 timeout value (see RFC-2349)
3374
dzubb65a312003-09-30 15:22:12 +00003375* Improve SDRAM setup for TRAB board
3376
dzu88a1bfa2003-09-30 15:11:43 +00003377* Suppress all output with splashscreen configured only if "splashimage"
3378 is set
3379
dzucad07372003-09-30 14:36:51 +00003380* Fix problems with I2C support for mpc5200
3381
dzu8a42eac2003-09-29 21:55:54 +00003382* Adapt TRAB configuration and auto_update to new memory layout
3383
dzu91e940d2003-09-25 22:32:40 +00003384* Add configuration for wtk board
3385
dzu29127b62003-09-25 22:30:12 +00003386* Add support for the Sharp LQ065T9DR51U LCD display
3387
wdenk206c60c2003-09-18 10:02:25 +00003388* Patch by Rune Torgersen, 17 Sep 2003:
3389 - Fixes for MPC8266 default config
wdenk65bd0e22003-09-18 10:45:21 +00003390 - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
wdenk206c60c2003-09-18 10:02:25 +00003391
3392* Patches by Jon Diekema, 17 Sep 2003:
3393 - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and
3394 env_common.c)
3395 - sbc8260 tweaks
3396 - adjust "help" output
3397
wdenk5f535fe2003-09-18 09:21:33 +00003398* Patches by Anders Larsen, 17 Sep 2003:
3399 - fix spelling errors
3400 - set GD_FLG_DEVINIT flag only after device function pointers
3401 are valid
3402 - Allow CFG_ALT_MEMTEST on systems where address zero isn't
3403 writeable
3404 - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs
3405 - trigger watchdog while waiting in serial driver
3406
wdenkb0639ca2003-09-17 22:48:07 +00003407* Add auto-update code for TRAB board using USB memory sticks,
3408 support new configuration with more memory
wdenkf54ebdf2003-09-17 15:10:32 +00003409
wdenkef709e92003-09-16 17:35:37 +00003410* disable MPC5200 bus pipelining as workaround for bus contention
3411
wdenk4aeb2512003-09-16 17:06:05 +00003412* Modify XLB arbiter priorities on MPC5200 so all devices use same
3413 priority; configure critical interrupts to be handled like external
3414 interrupts
3415
wdenkacf98e72003-09-16 11:39:10 +00003416* Make IPB clock on MGT5100/MPC5200 configurable in board config file;
3417 go back to 66 MHz for stability
3418
wdenk78137c32003-09-15 18:00:00 +00003419* Patches by Jon Diekema, 15 Sep 2003:
3420 - add description for missing CFG_CMD_* entries in the README file
3421 - sacsng tweaks
3422
wdenk35656de2003-09-14 19:08:39 +00003423* Patch by Gleb Natapov, 14 Sep 2003:
3424 enable watchdog support for all MPC824x boards that have a watchdog
3425
3426* On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
3427 "Non-octet Aligned Frame" errors we see at 100 Mbps
3428
3429* Patch by Sharad Gupta, 14 Sep 2003:
3430 fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
3431
wdenk200f8c72003-09-13 19:13:29 +00003432* Patch by llandre, 11 Sep 2003:
3433 update configuration for PPChameleonEVB board
3434
wdenk531716e2003-09-13 19:01:12 +00003435* Patch by David Müller, 13 Sep 2003:
3436 various changes to VCMA9 board specific files
3437
3438* Add I2C support for MGT5100 / MPC5200
3439
wdenkb70e7a02003-09-12 20:09:09 +00003440* Patch by Rune Torgersen, 11 Sep 2003:
3441 Changed default memory option on MPC8266ADS to NOT be Page Based
3442 Interleave, since this doesn't work very well with the standard
3443 16MB DIMM
3444
3445* Patch by George G. Davis, 12 Sep 2003:
3446 fix Makefile settings for sk98 driver
3447
stroese68ce8952003-09-12 08:57:52 +00003448* Patch by Stefan Roese, 12 Sep 2003:
3449 - new boards added: DP405, HUB405, PLU405, VOH405
3450 - some esd boards updated
3451 - cpu/ppc4xx/sdram.c: disable memory controller before setting
3452 first values
3453 - cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems
3454
wdenk4f7cb082003-09-11 23:06:34 +00003455* Patch by Martin Krause, 11 Sep 2003:
3456 add burn-in tests for TRAB board
3457
3458* Enable instruction cache on MPC5200 board
3459
wdenka43278a2003-09-11 19:48:06 +00003460* Patch by Denis Peter, 11 Sep 2003:
3461 - fix USB data pointer assignment for bulk only transfer.
3462 - prevent to display erased directories in FAT filesystem.
3463
3464* Change output format for NAND flash - make it look like for other
3465 memory, too
3466
3467======================================================================
wdenk149dded2003-09-10 18:20:28 +00003468Changes for U-Boot 0.4.8:
wdenkd94f92c2003-08-28 09:41:22 +00003469======================================================================
3470
dzu29127b62003-09-25 22:30:12 +00003471* Add I2C and RTC support for RMU board
3472
wdenk7205e402003-09-10 22:30:53 +00003473* Patches by Denis Peter, 9 Sep 2003:
3474 add FAT support for IDE, SCSI and USB
3475
3476* Patches by Gleb Natapov, 2 Sep 2003:
3477 - cleanup of POST code for unsupported architectures
3478 - MPC824x locks way0 of data cache for use as initial RAM;
3479 this patch unlocks it after relocation to RAM and invalidates
3480 the locked entries.
3481
3482* Patch by Gleb Natapov, 30 Aug 2003:
3483 new I2C driver for mpc107 bridge. Now works from flash.
3484
3485* Patch by Dave Ellis, 11 Aug 2003:
3486 - JFFS2: fix typo in common/cmd_jffs2.c
3487 - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
3488 - JFFS2: remove node version 0 warning
3489 - JFFS2: accept JFFS2 PADDING nodes
3490 - SXNI855T: add AM29LV800 support
3491 - SXNI855T: move environment from EEPROM to flash
3492 - SXNI855T: boot from JFFS2 in NOR or NAND flash
3493
3494* Patch by Bill Hargen, 11 Aug 2003:
3495 fixes for I2C on MPC8240
3496 - fix i2c_write routine
3497 - fix iprobe command
3498 - eliminates use of global variables, plus dead code, cleanup.
3499
wdenk149dded2003-09-10 18:20:28 +00003500* Add support for USB Mass Storage Devices (BBB)
3501 (tested with USB memory sticks only)
3502
3503* Avoid flicker on TRAB's VFD
3504
wdenk7152b1d2003-09-05 23:19:14 +00003505* Add support for SK98xx driver
3506
3507* Add PCI support for SL8245 board
3508
3509* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
3510 or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
3511 Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
3512
3513* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
3514 to allow for more accurate baudrate settings
3515 (error now 0.7% at 115 kbps, instead of 3.5% before)
3516
3517* Patch by Andreas Mohr, 4 Sep 2003:
3518 Fix a lot of spelling errors
3519
wdenk12f34242003-09-02 22:48:03 +00003520* Add support for PPChameleon Eval Board
3521
3522* Add support for P3G4 board
3523
3524* Fix problem with MGT5100 FEC driver: add "early" MAC address
3525 initialization
3526
wdenk326428c2003-08-31 18:37:54 +00003527* Patch by Yuli Barcohen, 7 Aug 2003:
3528 check BCSR to detect if the board is configured in PCI mode
3529
wdenk149dded2003-09-10 18:20:28 +00003530======================================================================
3531Changes for U-Boot 0.4.7:
3532======================================================================
3533
wdenk0cb61d72003-08-30 00:05:50 +00003534* Patch by Raghu Krishnaprasad, 7 Aug 2003:
3535 add support for Adder II MPC852T module
3536
wdenk6f213472003-08-29 22:00:43 +00003537* Patch by George G. Davis, 19 Aug 2003:
3538 fix TI Innovator/OMAP1510 pin configs
3539
3540* Patches by Kshitij, 18 Aug 2003
3541 - add support for arm926ejs cpu core
3542 - add support for TI OMAP 1610 Innovator Board
3543
wdenkc29fdfc2003-08-29 20:57:53 +00003544* Patch by Yuli Barcohen, 14 Aug 2003:
3545 add support for bzip2 uncompression
3546
3547* Add GCC library to examples/Makefile so GCC utility functions will
3548 be resolved, too
3549
wdenkca75add2003-08-29 10:05:53 +00003550* Add I2C and RTC support for RMU board using software I2C driver
3551 (because of better response to iprobe command); fix problem with
3552 "reset" command
3553
stroese437ce072003-08-28 14:24:37 +00003554* Patch by Matthias Fuchs, 28 Aug 2003:
3555 Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
3556 CONFIG_BOOTP_MAKS (see README).
3557
wdenkd94f92c2003-08-28 09:41:22 +00003558* Fix ICU862 environment problem
3559
3560* Fix RAM size detection for RMU board
3561
3562* Implement "reset" for MGT5100/MPC5200 systems
3563
3564======================================================================
3565Changes for U-Boot 0.4.6:
wdenk2535d602003-07-17 23:16:40 +00003566======================================================================
3567
wdenke0ac62d2003-08-17 18:55:18 +00003568* Make Ethernet autonegotiation on INCA-IP work for all clock rates;
3569 allow selection of clock frequency as "make" target
3570
3571* Implement memory autosizing code for IceCube boards
3572
3573* Configure network port on INCA-IP for autonegotiation
3574
3575* Fix overflow problem in network timeout code
3576
3577* Patch by Richard Woodruff, 8 Aug 2003:
3578 Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
3579
wdenkd94f92c2003-08-28 09:41:22 +00003580======================================================================
3581Changes for U-Boot 0.4.5:
3582======================================================================
3583
wdenkae3af052003-08-07 22:18:11 +00003584* Update for TQM board defaults:
3585 disable clocks_in_mhz, enable boot count limit
3586
dzu9374fa22003-08-07 15:04:48 +00003587* Removed tools/gdb from "make all" target. Added make target "gdbtools"
3588 in toplevel directory instead. Removed astest.c from tools/gdb because
3589 it is no longer relevant.
3590
wdenk96e48cf2003-08-05 18:22:44 +00003591* Fix PCI support for MPC5200 / IceCube Board
3592
wdenkbdccc4f2003-08-05 17:43:17 +00003593* Map ISP1362 USB OTG controller for NSCU board
3594
3595* Patch by Brad Parker, 02 Aug 2003:
3596 fix sc520_cdp problems
3597
3598* Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)
3599
3600* Allow erase command to cross flash bank boundaries
3601
wdenk1f4bb372003-07-27 00:21:01 +00003602* Patch by Scott McNutt, 21 Jul 2003:
3603 Add support for LynuxWorks Kernel Downloadable Images (KDIs).
3604 Both LynxOS and BlueCat linux KDIs are supported.
3605
3606* Patch by Richard Woodruff, 25 Jul 2003:
3607 use more reliable reset for OMAP/925T
3608
3609* Patch by Nye Liu, 25 Jul 2003:
3610 fix typo in mpc8xx.h
3611
3612* Patch by Richard Woodruff, 24 Jul 2003:
3613 Fixes for cmd_nand.c:
3614 - Fixed null dereferece which could result in incorrect ECC values.
3615 - Added support for devices with no Ready/Busy signal hooked up.
3616 - Added OMAP1510 read/write protect handling.
3617 - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
3618 for non-JFFS2.
3619 - Switched default ECC to be JFFS2.
3620
wdenk77846742003-07-26 08:08:08 +00003621* Allow crc32 to be used at address 0x000
3622
3623* Provide consistent interface to standalone applications to access
3624 the 'global_data' structure
3625 Provide a doc/README.standalone more useful to users/developers.
3626
3627* Make IceCube MGT5100 FEC driver work
3628
wdenk27b207f2003-07-24 23:38:38 +00003629* Implement new mechanism to export U-Boot's functions to standalone
3630 applications: instead of using (PPC-specific) system calls we now
3631 use a jump table; please see doc/README.standalone for details
3632
3633* Patch by Dave Westwood, 24 Jul 2003:
3634 added support for Unity OS (a proprietary OS)
3635
3636* Patch by Detlev Zundel, 23 Jul 2003:
3637 add "imls" command to print flash table of contents
3638
3639* Fix cold boot detection for log buffer reset
3640
3641* Return error for invalid length specifiers with "cp.X" etc.
3642
3643* Fix startup problem on MIPS
3644
3645* Allow for CONFIG_SPLASH_SCREEN even when no explicit
3646 bitmap support is configured
3647
3648* Patch by Bill Hargen, 18 Jul 2003:
3649 - fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c
3650
3651* Patch by Denis Peter, 18 Jul 2003:
3652 - fix memory configuration for MIP405T
3653 - fix printout of baudrate for "loadb <loadaddr> <baudrate>"
3654
3655* Cleanup of TQM82xx configurations; use "official" board types
3656 to make selection easier.
3657
wdenk2535d602003-07-17 23:16:40 +00003658* Patch by Martin Krause, 17 Jul 2003:
3659 add delay to get I2C working with "imm" command and s3c24x0_i2c.c
3660
3661* Patch by Richard Woodruff, 17 July 03:
stroese437ce072003-08-28 14:24:37 +00003662 - Fixed bug in OMAP1510 baud rate divisor settings.
wdenk2535d602003-07-17 23:16:40 +00003663
3664* Patch by Nye Liu, 16 July 2003:
3665 MPC860FADS fixes:
3666 - add MPC86xADS support (uses MPC86xADS.h)
3667 - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
3668 o PLPRCR changes
3669 o BRG changes (EXTAL/XTAL restricted to 10MHz)
3670 o don't trust gclk() software measurement by default, depend on
3671 CONFIG_8xx_GCLK_FREQ
3672 - add DRAM SIMM not installed detection
3673 - use more "correct" SDRAM initialization sequence
3674 - allow different SDRAM sizes (8xxADS has 8M)
3675 - default DER is 0
3676 - remove unused MAMR defines from FADS860T.h (all done in fads.c)
3677 - rename MAMR/MBMR defines to be more consistent. Should eventually
3678 be merged into MxMR to better reflect the PowerQUICC datasheet.
3679
3680* Patch by Yuli Barcohen, 16 Jul 2003:
3681 support new Motorola PQ2FADS-ZU evaluation board which replaced
3682 MPC8260ADS and MPC8266ADS
3683
3684======================================================================
wdenk945af8d2003-07-16 21:53:01 +00003685Changes for U-Boot 0.4.4:
3686======================================================================
3687
3688* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
3689
3690* Add support for MGT5100 and MPC5200 processors
3691
3692* Patch by Lutz Dennig, 15 Jul 2003:
3693 update for R360MPI board
3694
3695======================================================================
wdenk8564acf2003-07-14 22:13:32 +00003696Changes for U-Boot 0.4.3:
wdenkb37c7e52003-06-30 16:24:52 +00003697======================================================================
3698
wdenk2e5983d2003-07-15 20:04:06 +00003699* Patches by Kshitij, 04 Jul 2003
wdenk945af8d2003-07-16 21:53:01 +00003700 - added support for arm925t cpu core
wdenk2e5983d2003-07-15 20:04:06 +00003701 - added support for TI OMAP 1510 Innovator Board
3702
wdenk6dff5522003-07-15 07:45:49 +00003703* Patches by Martin Krause, 14 Jul 2003:
3704 - add I2C support for s3c2400 systems (trab board)
3705 - (re-) add "ping" to command table
3706
3707* Fix handling of "slow" POST routines
3708
wdenk8564acf2003-07-14 22:13:32 +00003709* Patches by Yuli Barcohen, 13 Jul 2003:
3710 - Correct flash and JFFS2 support for MPC8260ADS
3711 - fix PVR values and clock generation for PowerQUICC II family
3712 (8270/8275/8280)
3713
3714* Patch by Bernhard Kuhn, 08 Jul 2003:
3715 - add support for M68K targets
3716
3717* Patch by Ken Chou, 3 Jul:
3718 - Fix PCI config table for A3000
3719 - Fix iobase for natsemi.c
3720 (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
wdenk945af8d2003-07-16 21:53:01 +00003721
wdenk8564acf2003-07-14 22:13:32 +00003722* Allow to enable "slow" POST routines by key press on power-on
3723* Fix temperature dependend switching of LCD backlight on LWMON
3724* Tweak output format for LWMON
3725
stroese57029232003-07-11 08:23:12 +00003726* Patch by Stefan Roese, 11 Jul 2003:
3727 - Fix bug in CONFIG_VERSION_VARIABLE.
3728 - AR405 config updated.
3729 - OCRTC/ORSG: bsp command added.
3730 - ASH405 bsp update.
3731
wdenk8564acf2003-07-14 22:13:32 +00003732======================================================================
3733Changes for U-Boot 0.4.2:
3734======================================================================
3735
wdenkf12e5682003-07-07 20:07:54 +00003736* Add support for NSCU board
3737
3738* Add support for TQM823M, TQM850M, TQM855M and TQM860M modules
3739
3740* Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML
3741 mirror bit flash on TQM8xxM modules
3742
wdenk0d498392003-07-01 21:06:45 +00003743* Patch by Kenneth Johansson, 30 Jun 2003:
3744 get rid of MK_CMD_ENTRY macro; update doc/README.command
3745
wdenkb37c7e52003-06-30 16:24:52 +00003746* Patch by Seb James, 30 Jun 2003:
3747 Improve documentation of I2C configuration in README
3748
3749* Fix problems with previous log buffer "fixes"
3750
3751* Fix minor help text issues
3752
3753* "log append" did not append a newline
3754
3755======================================================================
wdenkb0fce992003-06-29 21:03:46 +00003756Changes for U-Boot 0.4.1:
wdenk8bde7f72003-06-27 21:31:46 +00003757======================================================================
3758
wdenkb0fce992003-06-29 21:03:46 +00003759* Fix some missing commands, cleanup header files
3760 (autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
3761
wdenk9d2b18a2003-06-28 23:11:04 +00003762* Rewrite command lookup and help command (fix problems with bubble
3763 sort when sorting command name list). Minor cleanup here and there.
3764
wdenkd1cbe852003-06-28 17:24:46 +00003765* Merge from "stable branch", tag LABEL_2003_06_28_1800-stable:
3766 - Allow to call sysmon function interactively
3767 - PIC on LWMON board needs delay after power-on
3768 - Add missing RSR definitions for MPC8xx
3769 - Improve log buffer handling: guarantee clean reset after power-on
wdenk149dded2003-09-10 18:20:28 +00003770 - Add support for EXBITGEN board (aka "genie")
wdenkd1cbe852003-06-28 17:24:46 +00003771 - Add support for SL8245 board
3772
wdenk8bde7f72003-06-27 21:31:46 +00003773* Code cleanup:
3774 - remove trailing white space, trailing empty lines, C++ comments, etc.
3775 - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
3776
3777* Patches by Kenneth Johansson, 25 Jun 2003:
3778 - major rework of command structure
3779 (work done mostly by Michal Cendrowski and Joakim Kristiansen)
3780
3781======================================================================
3782Changes for U-Boot 0.4.0:
wdenk4532cb62003-04-27 22:52:51 +00003783======================================================================
3784
wdenk993cad92003-06-26 22:04:09 +00003785* Patches by Robert Schwebel, 26 Jun 2003:
wdenk8bde7f72003-06-27 21:31:46 +00003786 - csb226 configuration updated
3787 - credits for logodl port updated
3788 - innokom configuration updated
3789 - logodl tree update, still with coding style inconsistencies
3790 - added OCM for ppc405 warning to README
wdenk993cad92003-06-26 22:04:09 +00003791
3792* Patch by Pantelis Antoniou, 25 Jun 2003:
3793 update NetVia with V2 board support
3794
wdenkb783eda2003-06-25 22:26:29 +00003795* Header file cleanup for ARM
3796
3797* Patch by Murray Jensen, 24 Jun 2003:
3798 - make sure to use only U-boot provided header files
3799 - fix problems with ".rodata.str1.4" section as used by GCC-3.x
3800
stroesea300d832003-06-24 14:32:24 +00003801* Patch by Stefan Roese, 24 Jun 2003:
3802 - Update esd ASH405 board files.
3803 - Update esd DASA_SIM config file.
3804 - Add ping command to some esd boards.
3805
wdenkcceb8712003-06-23 18:12:28 +00003806* Patch by Yuli Barcohen, 23 Jun 2003:
3807 Update for MPC8260ADS board
3808
3809* Patch by Murray Jensen, 23 Jun 2003:
3810 - cleanup of GCC 3.x compiler warnings
3811
wdenk3595ac42003-06-22 17:18:28 +00003812* Patch by Rune Torgersen, 4 Jun 2003:
3813 add large memory support for MPC8266ADS board
stroesea300d832003-06-24 14:32:24 +00003814
wdenk3595ac42003-06-22 17:18:28 +00003815* Patch by Richard Woodruff, 19 June 03:
3816 - Enabled standard u-boot device abstraction for ARM
3817 - Enabled console device for ARM
3818 - Initilized bi_baudrate for ARM
3819
3820* Patch by Bill Hargen, 23 Apr 2003:
3821 fix byte order for 824x I2C addresses (write op)
3822
wdenk592c5ca2003-06-21 00:17:24 +00003823* Patch by Murray Jensen, 20 Jun 2003:
3824 - hymod update
3825 - cleanup (especially for gcc-3.x compilers)
3826
wdenk72755c72003-06-20 23:10:58 +00003827* Patch by Tom Guilliams, 20 Jun 2003:
3828 added CONFIG_750FX support for IBM 750FX processors
3829
wdenk03329902003-06-20 22:36:30 +00003830* Patch by Devin Crumb, 02 Apr 2003:
3831 Fix clock divider rounding problem in drivers/serial.c
3832
3833* Patch by Richard Woodruff, 19 June 03:
3834 - Fixed smc91c111 driver to sync with the u-boot environment
3835 (driver/smc91c111.c).
wdenk0b97ab12003-06-19 23:58:30 +00003836 - Added eth_init error return check in NetLoop (net/net.c).
3837
wdenk03329902003-06-20 22:36:30 +00003838* Patch by Ken Chou, 19 June 2003:
wdenk0b97ab12003-06-19 23:58:30 +00003839 Added support for A3000 SBC board (Artis Microsystems Inc.)
3840
wdenk6dd652f2003-06-19 23:40:20 +00003841* Patches by Murray Jensen, 17 Jun 2003:
3842 - Hymod board database mods: add "who" field and new xilinx chip types
3843 - provide new "init_cmd_timeout()" function so code external to
3844 "common/main.c" can use the "reset_cmd_timeout()" function before
3845 entering the main loop
3846 - add DTT support for adm1021 (new file dtt/adm1021.c; config
3847 slightly different. see include/configs/hymod.h for an example
3848 (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
3849 CFG_DTT_ADM1021 defined)
3850 - add new "eeprom_probe()" function which has similar args and
3851 behaves in a similar way to "eeprom_read()" etc.
3852 - add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
3853 function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
3854 - gdbtools copyright update
3855 - ensure that set_msr() executes the "sync" and "isync" instructions
3856 after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
3857 - 8260 I/O ports fix: Open Drain should be set last when configuring
3858 - add SIU IRQ defines for 8260
3859 - allow LDSCRIPT override and OBJCFLAGS initialization: change to
3860 config.mk to allow board configurations to override the GNU
3861 linker script, selected via the LDSCRIPT, make variable, and to
3862 give an initial value to the OBJCFLAGS make variable
3863 - 8260 i2c enhancement:
3864 o correctly extends the timeout depending on the size of all
3865 queued messages for both transmit and receive
3866 o will not continue with receive if transmit times out
3867 o ensures that the error callback is done for all queued tx
3868 and rx messages
3869 o correctly detects both tx and rx timeouts, only delivers one to
3870 the callback, and does not overwrite an earlier error
3871 o logic in i2c_probe now correct
3872 - add "vprintf()" function so that "panic()" function can be
3873 technically correct
3874 - many Hymod board changes
3875
wdenk52f52c12003-06-19 23:04:19 +00003876* Patches by Robert Schwebel, 14 Jun 2003:
3877 - add support for Logotronic DL datalogger board
3878 - cleanup serial line after kermit binary download
3879 - add debugX macro (debug level support)
3880 - update mach-types.h to latest arm.linux.org.uk master list.
3881
wdenk48b42612003-06-19 23:01:32 +00003882* Patches by David Müller, 12 Jun 2003:
3883 - rewrite of the S3C24X0 register definitions stuff
3884 - "driver" for the built-in S3C24X0 RTC
3885
3886* Patches by Yuli Barcohen, 12 Jun 2003:
3887 - Add MII support and Ethernet PHY initialization for MPC8260ADS board
3888 - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
3889 configuration word supplied by FPGA on some MPC8260ADS boards
3890
3891* Patch by Pantelis Antoniou, 10 Jun 2003:
3892 Unify status LED interface
3893
wdenk15ef8a52003-06-18 20:22:24 +00003894* Add support for DS12887 RTC; add RTC support for ATC board
3895
wdenk2abbe072003-06-16 23:50:08 +00003896* Patch by Nicolas Lacressonniere, 11 Jun 2003:
3897 Modifications for Atmel AT91RM9200DK ARM920T based development kit
3898 - Add Atmel DataFlash support for reading and writing.
stroesea300d832003-06-24 14:32:24 +00003899 - Add possibility to boot a Linux from DataFlash with BOOTM command.
wdenk2abbe072003-06-16 23:50:08 +00003900 - Add Flash detection on Atmel AT91RM9200DK
3901 (between Atmel AT49BV1614 and AT49BV1614A flashes)
3902 - Replace old Ethernet PHY layer functions
3903 - Change link address
3904
3905* Patch by Frank Smith, 9 Jun 2003:
3906 use CRIT_EXCEPTION for machine check on 4xx
3907
3908* Patch by Detlev Zundel, 13 Jun 2003:
3909 added implementation of the "carinfo" command in cmd_immap.c
3910
wdenk71f95112003-06-15 22:40:42 +00003911* Fix CONFIG_NET_MULTI support in include/net.h
3912
3913* Patches by Kyle Harris, 13 Mar 2003:
3914 - Add FAT partition support
3915 - Add command support for FAT
3916 - Add command support for MMC
3917 ----
3918 - Add Intel PXA support for video
3919 - Add Intel PXA support for MMC
3920 ----
3921 - Enable MMC and FAT for lubbock board
3922 - Other misc changes for lubbock board
3923
wdenk487778b2003-06-06 11:20:01 +00003924* Patch by Robert Schwebel, April 02, 2003:
3925 fix for SMSC91111 driver
3926
wdenka3ed3992003-06-05 19:37:36 +00003927* Patch by Vladimir Gurevich, 04 Jun 2003:
3928 make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option
3929
stroese08eaea92003-06-05 15:44:37 +00003930* Patch by Stefan Roese, 05 Jun 2003:
3931 - PPC4xx: Fix bug for initial stack in data cache as pointed out by
3932 Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in
3933 data cache can be used even if the chip select is in use.
3934 - CFG_RX_ETH_BUFFER added to set the ethernet receive buffer count
3935 (see README for further description).
3936 - Changed config files of CONFIG_EEPRO100 boards to use the
3937 CFG_RX_ETH_BUFFER define.
3938
wdenk73a8b272003-06-05 19:27:42 +00003939* Add support for RMU board
3940
3941* Add support for TQM862L at 100/50 MHz
3942
3943* Patch by Pantelis Antoniou, 02 Jun 2003:
3944 major reconstruction of networking code;
3945 add "ping" support (outgoing only!)
3946
wdenkf3e0de62003-06-04 15:05:30 +00003947* Patch by Denis Peter, 04 June 2003:
3948 add support for the MIP405T board
3949
wdenk682011f2003-06-03 23:54:09 +00003950* Patches by Udi Finkelstein, 2 June 2003:
3951 - Added support for custom keyboards, initialized by defining a
3952 board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
3953 - Added support for the RBC823 board.
3954 - cpu/mpc8xx/lcd.c now automatically calculates the
3955 Horizontal Pixel Count field.
3956
3957* Fix alignment problem in BOOTP (dhcp_leasetime option)
3958 [pointed out by Nicolas Lacressonnière, 2 Jun 2003]
3959
3960* Patch by Mark Rakes, 14 May 2003:
3961 add support for Intel e1000 gig cards.
3962
3963* Patch by Nye Liu, 3 Jun 2003:
3964 fix critical typo in MAMR definition (include/mpc8xx.h)
3965
3966* Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
3967
3968* Patch by Klaus Heydeck, 2 Jun 2003
3969 Minor changes for KUP4K configuration
3970
wdenk7a8e9bed2003-05-31 18:35:21 +00003971* Patch by Marc Singer, 29 May 2003:
3972 Fixed rarp boot method for IA32 and other little-endian CPUs.
3973
3974* Patch by Marc Singer, 28 May 2003:
3975 Added port I/O commands.
3976
3977* Patch by Matthew McClintock, 28 May 2003
3978 - cpu/mpc824x/start.S: fix relocation code when booting from RAM
3979 - minor patches for utx8245
3980
3981* Patch by Daniel Engström, 28 May 2003:
3982 x86 update
3983
3984* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
3985 add nand flash support to SXNI855T configuration
3986 fix/extend nand flash support:
3987 - fix 'nand erase' command so does not erase bad blocks
3988 - fix 'nand write' command so does not write to bad blocks
3989 - fix nand_probe() so handles no flash detected properly
3990 - add doc/README.nand
3991 - add .jffs2 and .oob options to nand read/write
3992 - add 'nand bad' command to list bad blocks
3993 - add 'clean' option to 'nand erase' to write JFFS2 clean markers
3994 - make NAND read/write faster
3995
3996* Patch by Rune Torgersen, 23 May 2003:
3997 Update for MPC8266ADS board
3998
wdenk3b57fe02003-05-30 12:48:29 +00003999* Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
4000 instead CFG_MONITOR_LEN is now only used to determine _at_compile_
4001 _time_ (!) if the environment is embedded within the U-Boot image,
4002 or in a separate flash sector.
4003
4004* Cleanup CFG_DER #defines in config files (wd maintained only)
4005
wdenkf07771c2003-05-28 08:06:31 +00004006* Fix data abort exception handling for arm920t CPU
4007
4008* Fix alignment problems with flash driver for TRAB board
4009
4010* Patch by Donald White, 21 May 2003:
4011 fix calculation of base address in pci_hose_config_device()
4012
4013* Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
4014 execute "cmd2", even if "cmd1" fails. Note that this is different
4015 to "run var1 var2" where the contents of "var2" will NOT be
4016 executed when a command in "var1" fails.
4017
wdenk38b99262003-05-23 23:18:21 +00004018* Add zero-copy ramdisk support (requires corresponding kernel support!)
4019
wdenk4c3b21a2003-05-23 12:36:20 +00004020* Patch by Kyle Harris, 20 May 2003:
4021 In preparation for an ixp port, rename cpu/xscale and arch-xscale
4022 into cpu/pxa and arch-pxa.
4023
stroesed9ff6e82003-05-23 11:49:24 +00004024* Patch by Stefan Roese, 23 May 2003:
4025 - IBM PPC405EP port added.
4026 - CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not
4027 UART0) is used as default U-Boot console. PPC4xx only!
4028 - esd ASH405 board added (PPC405EP based).
4029 - BUBINGA405EP board added (PPC405EP based - IBM Eval Board).
4030 - esd CPCI405AB board added.
4031 - esd PMC405 board added.
4032 - Update of some esd boards.
4033
wdenk33149b82003-05-23 11:38:58 +00004034* Patch by Denis Peter, 19 Mai 2003:
4035 add support for the MIP405-3 board
4036
wdenk5d232d02003-05-22 22:52:13 +00004037* Patch by Dave Ellis, 22 May 2003:
4038 Fix problem with only partially cleared .bss segment
4039
4040* Patch by Rune Torgersen, 12 May 2003:
4041 get PCI to work on a MPC8266ADS board; incorporate change to
4042 cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
4043
4044* Patch by Nye Liu, 1 May 2003:
4045 minor patches for the FADS8xx
4046
4047* Patch by Thomas Schäfer, 28 Apr 2003:
4048 Fix SPD handling for 256 ECC DIMM on Walnut
4049
wdenkc8c3a8b2003-05-21 20:26:20 +00004050* Add support for arbitrary bitmaps for TRAB's VFD command;
4051 allow to pass boot bitmap addresses in environment variables;
4052 allow for zero boot delay
wdenk82226bf2003-05-20 20:49:01 +00004053
4054* Patch by Christian Geißinger, 19 May 2002:
4055 On TRAB: wait until the dummy byte has been completely sent
4056
wdenk7f70e852003-05-20 14:25:27 +00004057* Patch by David Updegraff, 22 Apr 2003:
4058 update for CrayL1 board
4059
4060* Patch by Pantelis Antoniou, 21 Apr 2003:
4061 add boot support for ARTOS (a proprietary OS)
4062
4063* Patch by Steven Scholz, 11 Apr 2003:
4064 Add support for RTC DS1338
4065
4066* Patch by Rod Boyce, 24 Jan 2003:
4067 Fix counting of extended partitions in diskboot command
4068
wdenk59de2ed2003-05-20 10:58:04 +00004069* Patch by Christophe Lindheimer, 20 May 2003:
4070 allow the use of CFG_LOADS when CFG_NO_FLASH is set
4071
wdenk86d82762003-05-20 10:39:44 +00004072* Fix SDRAM timing on Purple board
4073
wdenk66fd3d12003-05-18 11:30:09 +00004074* Add support for CompactFlash on ATC board
4075 (includes support for Intel 82365 and compatible PC Card controllers,
4076 and Yenta-compatible PCI-to-CardBus controllers)
4077
wdenk45219c42003-05-12 21:50:16 +00004078* Patch by Mathijs Haarman, 08 May 2003:
4079 Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
4080
wdenk9c62cc52003-05-03 23:33:47 +00004081* Fix problem with usage of "true" (undefined in current versions of bfd.h)
4082
wdenk7aa78612003-05-03 15:50:43 +00004083* Add support for Promess ATC board
4084
4085* Patch by Keith Outwater, 28 Apr 2003:
4086 - Miscellaneous corrections and additions to GEN860T board specific code.
4087 - Added GEN860_SC variant to GEN860T.
4088 - Miscellaneous corrections to GEN860T documentation.
4089 - Correct duplicate entry in U-Boot CREDITS file.
4090 - Add GEN860T_SC entry in MAINTAINERS file.
4091 - Update CREDITS file with GEN860T_SC info.
4092
4093* Update Smiths Aerospace addresses in MAINTAINERS file
4094
4095* Fix error handling in hush's version of "run" command
4096
wdenk4532cb62003-04-27 22:52:51 +00004097* LWMON extensions:
4098 - Splashscreen support
4099 - modem support
4100 - sysmon support
4101 - temperature dependend enabling of LCD
4102
4103* Allow booting from old "PPCBoot" disk partitions
4104
4105* Add support for TQM8255 Board / MPC8255 CPU
4106
4107======================================================================
wdenk02c9bed2003-04-20 17:41:25 +00004108Changes for U-Boot 0.3.1:
wdenkd126bfb2003-04-10 11:18:18 +00004109======================================================================
4110
wdenkd791b1d2003-04-20 14:04:18 +00004111* Make sure Block Lock Bits get cleared in R360MPI flash driver
4112
4113* MPC823 LCD driver: Fill color map backwards, to allow for steady
4114 display when Linux takes over
4115
4116* Patch by Erwin Rol, 27 Feb 2003:
4117 Add support for RTEMS (this time for real).
4118
4119* Add support for "bmp info" and "bmp display" commands to load
4120 bitmap images; this can be used (for example in a "preboot"
4121 command) to display a splash screen very quickly after poweron.
4122
4123* Add support for 133 MHz clock on INCA-IP board
4124
wdenk4a6fd342003-04-12 23:38:12 +00004125* Patch by Lutz Dennig, 10 Apr 2003:
4126 Update for R360MPI board
4127
4128* Add new meaning to "autostart" environment variable:
4129 If set to "no", a standalone image passed to the
4130 "bootm" command will be copied to the load address
4131 (and eventually uncompressed), but NOT be started.
4132 This can be used to load and uncompress arbitrary
4133 data.
4134
stroese69f8f822003-04-10 13:30:28 +00004135* Patch by Stefan Roese, 10 Apr 2003:
wdenk4a6fd342003-04-12 23:38:12 +00004136 Changed DHCP client to use IP address from server option field #54
4137 from the OFFER packet in the server option field #54 in the REQUEST
4138 packet. This fixes a problem using a Windows 2000 DHCP server,
4139 where the DHCP-server is not the TFTP-server.
4140
4141* Set max brightness for MN11236 displays on TRAB board
stroese69f8f822003-04-10 13:30:28 +00004142
wdenkd126bfb2003-04-10 11:18:18 +00004143* Add support for TQM862L modules
4144
4145======================================================================
wdenk60fbe252003-04-08 23:25:21 +00004146Changes for U-Boot 0.3.0:
wdenkaacf9a42003-01-17 16:27:01 +00004147======================================================================
4148
wdenk3e386912003-04-05 00:53:31 +00004149* Patch by Arun Dharankar, 4 Apr 2003:
4150 Add IDMA example code (tested on 8260 only)
4151
4152* Add support for Purple Board (MIPS64 5Kc)
4153
4154* Add support for MIPS64 5Kc CPUs
4155
4156* Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
4157
4158* Patch by Denis Peter, 04 Apr 2003:
4159 - update MIP405-4 board
4160
stroese36c05a82003-04-04 16:55:30 +00004161* Patch by Stefan Roese, 4 Apr 2003:
4162 - U-Boot version environment variable "ver" added
4163 (CONFIG_VERSION_VARIABLE).
4164 - Changed PPC405GPr version from A to B.
4165 - Changed CPCI405 to use CTS instead of DSR on PPC405 UART1.
4166
wdenk3e386912003-04-05 00:53:31 +00004167* Patches by Denis Peter, 03 April 2003:
4168 - fix PCI IRQs on MPL boards
4169 - fix two more un-relocated pointer problems
4170
4171* Fix behaviour of "run" command:
4172 - print error message iv variable does not exist
4173 - terminate processing of arguments in case of error
4174
4175* Patches by Peter Figuli, 10 Mar 2003
4176 - Add support for BTUART on PXA platform
4177 - Add support for WEP EP250 (PXA) board
4178
4179* Fix flash problems on INCA-IP; add tool to allow bruning images to
4180 flash using a BDI2000
4181
4182* Implement fix for I2C Edge Conditions problem for all boards that
4183 use the bit-banging driver (common/soft_i2c.c)
4184
wdenk0db5bca2003-03-31 17:27:09 +00004185* Patch by Martin Winistoerfer, 23 Mar 2003
4186 - Add port to MPC555/556 microcontrollers
4187 - Add support for cmi customer board with
4188 Intel 28F128J3A, 28F320J3A or 28F640J3A flash.
4189
4190* Patch by Rick Bronson, 28 Mar 2003:
4191 - fix common/cmd_nand.c
4192
wdenk85ec0bc2003-03-31 16:34:49 +00004193* Patch by Arun Dharankar, 24 Mar 2003:
4194 - add threads / scheduler example code
4195
4196* Add patches by Robert Schwebel, 31 Mar 2003:
4197 - add ctrl-c support for kermit download
4198 - align bdinfo output on ARM
wdenk3e386912003-04-05 00:53:31 +00004199 - csb226 board: bring in sync with innokom/memsetup.S
4200 - csb226 board: fix MDREFR handling
4201 - misc doc fixes / extensions
4202 - innokom board: cleanup, MDREFR fix in memsetup.S, config update
4203 - add BOOT_PROGRESS to armlinux.c
wdenk85ec0bc2003-03-31 16:34:49 +00004204
stroese36c05a82003-04-04 16:55:30 +00004205* Add CPU ID, version, and clock speed for INCA-IP
wdenk85ec0bc2003-03-31 16:34:49 +00004206
wdenk506f0442003-03-28 14:40:36 +00004207* Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
4208 - fix SRAM and SDRAM memory sizing
4209 - add status LED support
4210 - add MAC address for second (SCC1) ethernet port
4211
4212* Update default environment for TQM8260 board
4213
wdenkdc7c9a12003-03-26 06:55:25 +00004214* Patch by Rick Bronson, 16 Mar 2003:
wdenkc0218802003-03-27 12:09:35 +00004215 - Add NAND flash support for reading, writing, and erasing NAND
4216 flash (certain forms of which are called SmartMedia).
4217 - Add support for Atmel AT91RM9200DK ARM920T based development kit.
wdenkdc7c9a12003-03-26 06:55:25 +00004218
4219* Patches by Robert Schwebel, 19 Mar 2003:
4220 - use arm-linux-gcc as default compiler for ARM
4221 - fix i2c fixup code
4222 - fix missing baudrate setting
4223 - added $loadaddr / CFG_LOAD_ADDR support to loadb
4224 - moved "ignoring trailing characters" _before_ u-boot wants to
4225 print out diagnostics messages; removes bogus characters at the
4226 end of transmission
4227
4228* Patch by John Zhan, 18 Mar 2003:
4229 Add support for SinoVee Microsystems SC8xx boards
4230
4231* Patch by Rolf Offermanns, 21 Mar 2003:
4232 ported the dnp1110 related changes from the current armboot cvs to
4233 current u-boot cvs. smc91111 does not work. problem marked in
4234 smc91111.c, grep for "FIXME".
4235
4236* Patch by Brian Auld, 25 Mar 2003:
4237 Add support for STM flash chips on ebony board
4238
wdenk4d75a502003-03-25 16:50:56 +00004239* Add PCI support for MPC8250 Boards (PM825 module)
4240
stroese44e5c5c2003-03-25 14:44:48 +00004241* Patch by Stefan Roese, 25 Mar 2003:
4242 - PCI405 update.
4243
stroese5d5d44e2003-03-20 15:32:59 +00004244* Patch by Stefan Roese, 20 Mar 2003:
4245 - CPCI4052 update (support for revision 3).
4246 - Set edge conditioning circuitry on PPC405GPr for compatibility
4247 to existing PPC405GP designs.
4248 - Clip udiv to 5 bits on PPC405 (serial.c).
4249
wdenkc0218802003-03-27 12:09:35 +00004250* Extend INCAIP board support:
4251 - add automatic RAM size detection
4252 - add "bdinfo" command
4253 - pass flash address and size to Linux kernel
4254 - switch to 150 MHz clock
4255
wdenk06d01db2003-03-14 20:47:52 +00004256* Avoid flicker on the TRAB's VFD by synchronizing the enable with
4257 the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
4258 boards, version 153 for Rev. 200 boards).
4259
4260* Patch by Vladimir Gurevich, 12 Mar 2003:
4261 Fix relocation problem of statically initialized string pointers
4262 in common/cmd_pci.c
4263
4264* Patch by Kai-Uwe Blöm, 12 Mar 2003:
4265 Cleanup & bug fixes for JFFS2 code:
4266 - the memory mangement was broken. It caused havoc on malloc by
4267 writing beyond the block boundaries.
4268 - the length calculation for files was wrong, sometimes resulting
4269 in short file reads.
4270 - data copying now optionally takes fragment version numbers into
4271 account, to avoid copying from older data.
4272 See doc/README.JFFS2 for details.
4273
wdenk3bac3512003-03-12 10:41:04 +00004274* Patch by Josef Wagner, 12 Mar 2003:
4275 - 16/32 MB and 50/80 MHz support with auto-detection for IP860
4276 - ETH05 and BEDBUG support for CU824
4277 - added support for MicroSys CPC45
4278 - new BOOTROM/FLASH0 and DOC base for PM826
4279
4280* Patch by Robert Schwebel, 12 Mar 2003:
4281 Fix the chpart command on innokom board
4282
4283* Name cleanup:
4284 mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
4285 s/PPCBoot/U-Boot/ in some files
4286 s/pImage/uImage/ in some files
4287
4288* Patch by Detlev Zundel, 15 Jan 2003:
4289 Fix '' command line quoting
4290
4291* Patch by The LEOX team, 19 Jan 2003:
4292 - add support for the ELPT860 board
4293 - add support for Dallas ds164x RTC
4294
wdenk1cb8e982003-03-06 21:55:29 +00004295* Patches by David Müller, 31 Jan 2003:
4296 - minimal setup for CardBus bridges
4297 - add EEPROM read/write support in the CS8900 driver
4298 - add support for the builtin I2C controller in the Samsung s3c24x0 chips
wdenk3bac3512003-03-12 10:41:04 +00004299 - add support for MPL's VCMA9 (Samsung s3c2410 based) board
wdenk1cb8e982003-03-06 21:55:29 +00004300
4301* Patch by Steven Scholz, 04 Feb 2003:
4302 add support for RTC DS1307
4303
4304* Patch by Reinhard Meyer, 5 Feb 2003:
4305 fix PLPRCR/SCCR init sequence on 8xx to allow for
4306 changes of EBDF by software
4307
4308* Patch by Vladimir Gurevich, 07 Feb 2003:
4309 "API-compatibility patch" for 4xx I2C driver
4310
4311* TRAB fixes / extensions:
4312 - Restore VFD brightness as saved in environment
wdenk15ef8a52003-06-18 20:22:24 +00004313 - add support for Fujitsu flashes
wdenk1cb8e982003-03-06 21:55:29 +00004314 - make sure both buzzers are turned off (drive low level)
4315
wdenk47cd00f2003-03-06 13:39:27 +00004316* Patches by Robert Schwebel, 06 Mar 2003:
4317 - fix bug in BOOTP code (must use NetCopyIP)
4318 - update of CSB226 port
4319 - clear BSS segment on XScale
4320 - added support for i2c_init_board() function
4321 - update to the Innokom plattform
4322
4323* Extend support for redundand environments for configurations where
4324 environment size < sector size
4325
wdenkdb2f7212003-03-06 00:58:30 +00004326* Patch by Rune Torgersen, 13 Feb 2003:
4327 Add support for Motorola MPC8266ADS board
4328
4329* Patch by Kyle Harris, 19 Feb 2003:
4330 patches for the Intel lubbock board:
4331 memsetup.S - general cleanup (based on Robert's csb226 code)
4332 flash.c - overhaul, actually works now
4333 lubbock.c - fix init funcs to return proper value
4334
4335* Patch by Kenneth Johansson, 26 Feb 2003:
stroese5d5d44e2003-03-20 15:32:59 +00004336 - Fixed off by one in RFTA calculation.
wdenkdb2f7212003-03-06 00:58:30 +00004337 - No need to abort when LDF is lower than we can program it's only
stroese5d5d44e2003-03-20 15:32:59 +00004338 minimum timing so clamp it to what we can do.
wdenkdb2f7212003-03-06 00:58:30 +00004339 - Takes function pointer to function for reading the spd_nvram. Usefull
4340 for faking data or hardcode a module without the nvram.
4341 - fix other user for above change
4342 - fix some comments.
4343
4344* Patches by Brian Waite, 26 Feb 2003:
4345 - fix port for evb64260 board
4346 - fix PCI for evb64260 board
4347 - fix PCI scan
4348
4349* Patch by Reinhard Meyer, 1 Mar 2003:
4350 Add support for EMK TOP860 Module
4351
4352* Patch by Yuli Barcohen, 02 Mar 2003:
4353 Add SPD EEPROM support for MPC8260ADS board
4354
wdenk43d96162003-03-06 00:02:04 +00004355* Patch by Robert Schwebel, 21 Jan 2003:
4356 - Add support for Innokom board
4357 - Don't complain if "install" fails
4358 - README cleanup (remove duplicated lines)
4359 - Update PXA header files
4360
4361* Add documentation for existing POST code (doc/README.POST)
4362
4363* Patch by Laudney Ren, 15 Jan 2003:
4364 Fix handling of redundand environment in "tools/envcrc.c"
4365
4366* Patch by Detlev Zundel, 28 Feb 2003:
4367 Add bedbug support for 824x systems
4368
4369* Add support for 16 MB flash configuration of TRAB board
4370
4371* Patch by Erwin Rol, 27 Feb 2003:
4372 Add support for RTEMS
4373
4374* Add image information to README
4375
stroese2a9e02e2003-02-18 11:30:24 +00004376* Patch by Stefan Roese, 18 Feb 2003:
4377 CPCIISER4 configuration updated.
4378
stroesed7787c62003-02-17 16:06:06 +00004379* Patch by Stefan Roese, 17 Feb 2003:
4380 Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).
4381
stroesead10dd92003-02-14 11:21:23 +00004382* Patch by Stefan Roese, 13 Feb 2003:
4383 Add "pcidelay" environment variable (in ms, enabled via
4384 CONFIG_PCI_BOOTDELAY).
4385 PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after
4386 RST# to respond to configuration cycles (33MHz -> 1s).
4387
wdenk43d96162003-03-06 00:02:04 +00004388* Fix dual PCMCIA slot support (when running with just one
4389 slot populated)
4390
4391* Add VFD type detection to trab board
4392
4393* extend drivers/cs8900.c driver to synchronize ethaddr environment
4394 variable with value in the EEPROM
4395
stroeseee1b3b52003-02-10 16:39:00 +00004396* Patch by Stefan Roese, 10 Feb 2003:
4397 Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
4398
wdenkc0218802003-03-27 12:09:35 +00004399* Add support for MIPS32 4Kc CPUs
4400
4401* Add support for INCA-IP Board
4402
wdenk43d96162003-03-06 00:02:04 +00004403======================================================================
4404Changes for U-Boot 0.2.2:
4405======================================================================
4406
wdenkaacf9a42003-01-17 16:27:01 +00004407* Add dual ethernet support on PM826
4408
4409* Add support for LXT971 PHY on PM826
4410
4411* Patch by Tord Andersson, 16 Jan 2003:
4412 Fix flash sector count for TQM8xxL
4413
4414* Fix I2C EEPROM problem on ICU862 board (would only write the first
4415 16 bytes out of each 32 byte block)
4416
4417======================================================================
4418Changes for U-Boot 0.2.1:
wdenk288b3d72002-12-20 23:42:25 +00004419======================================================================
4420
wdenk608c9142003-01-13 23:54:46 +00004421* Add support for V37 board
4422 (patch by Jón Benediktsson, 11 Dec 2002)
4423
wdenkd0fb80c2003-01-11 09:48:40 +00004424* Update baudrate in bd_info when it gets changed
4425
4426* Add watchdog trigger points while waiting for serial port
4427 (so far only 8xx -- needed on LWMON with 100ms watchdog)
4428
4429* Improve command line tool to access the U-Boot's environment
4430 (figuration of the utility, using a config file)
4431
wdenka25f8622003-01-02 23:57:29 +00004432* Add single quote support for (old) command line parser
4433
wdenk288b3d72002-12-20 23:42:25 +00004434* Switch LWMON board default config from FRAM to EEPROM;
4435 in POST, EEPROM shows up on 8 addresses
4436
4437======================================================================
wdenk2f91a3d2002-12-17 18:07:30 +00004438Changes for U-Boot 0.2.0:
wdenk24ee89b2002-11-03 17:56:27 +00004439======================================================================
4440
wdenk6aff3112002-12-17 01:51:00 +00004441* Use 1-byte-read instead of -write for iprobe() function
4442 Add i2c commands to PM826 config
4443
4444* extend I2C POST code: check for list on known addresses
4445
wdenk228f29a2002-12-08 09:53:23 +00004446* Improve log buffer code; use "loglevel" to decide which messages
4447 to log on the console, too (like in Linux); get rid of "logstart"
4448
4449* Add command line tool to access the U-Boot's environment
4450 (board-specific for TRAB now, to be fixed later)
4451
wdenk7c7a23b2002-12-07 00:20:59 +00004452* Patch by Hans-Joerg Frieden, 06 Dec 2002
4453 Fix misc problems with AmigaOne support
4454
4455* Patch by Chris Hallinan, 3 Dec 2002:
4456 minor cleanup to the MPC8245 EPIC driver
4457
4458* Patch by Pierre Aubert , 28 Nov 2002
4459 Add support for external (SIU) interrupts on MPC8xx
4460
4461* Patch by Pierre Aubert , 28 Nov 2002
4462 Fix nested syscalls bug in standalone applications
4463
4464* Patch by David Müller, 27 Nov 2002:
4465 fix output of "pciinfo" command for CardBus bridge devices.
4466
4467* Fix bug in TQM8260 board detection - boards got stuck when board ID
4468 was not readable
4469
wdenk1f53a412002-12-04 23:39:58 +00004470* Add LED indication for IDE activity on KUP4K board
4471
wdenka6c7ad22002-12-03 21:28:10 +00004472* Fix startup problems with VFD display on TRAB
4473
4474* Patch by Pierre Aubert, 20 Nov 2002
4475 Add driver for Epson SED13806 graphic controller.
4476 Add support for BMP logos in cfb_console driver.
4477
wdenkea909b72002-11-21 23:11:29 +00004478* Added support for both PCMCIA slots (at the same time!) on MPC8xx
4479
4480* Patch by Rod Boyce, 21 Nov 2002:
4481 fix PCMCIA on MBX8xx board
4482
4483* Patch by Pierre Aubert , 21 Nov 2002
4484 Add CFG_CPM_POST_WORD_ADDR to make the offset of the
4485 bootmode word in DPRAM configurable
4486
wdenkb2184c32002-11-19 23:01:07 +00004487* Patch by Daniel Engström, 18 Nov 2002:
4488 Fixes for x86 port (mostly strings issues)
4489
4490* Patch by Ken Chou, 18 Nov 2002:
4491 Fix for natsemi NIC cards (DP83815)
4492
4493* Patch by Pierre Aubert, 19 Nov 2002:
4494 fix a bug for the MII configuration, and some warnings
4495
wdenkc7de8292002-11-19 11:04:11 +00004496* Patch by Thomas Frieden, 13 Nov 2002:
4497 Add code for AmigaOne board
4498 (preliminary merge to U-Boot, still WIP)
4499
4500* Patch by Jon Diekema, 12 Nov 2002:
4501 - Adding URL for IEEE OUI lookup
4502 - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
4503 being defined.
4504 - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
4505 root-on-nfs macros are designed to switch how the default boot
4506 method gets defined.
4507
wdenk2262cfe2002-11-18 00:14:45 +00004508* Patch by Daniel Engström, 13 Nov 2002:
4509 Add support for i386 architecture and AMD SC520 board
4510
4511* Patch by Pierre Aubert, 12 Nov 2002:
4512 Add support for DOS filesystem and booting from DOS floppy disk
4513
wdenk1d0350e2002-11-11 21:14:20 +00004514* Patch by Jim Sandoz, 07 Nov 2002:
4515 Increase number of network RX buffers (PKTBUFSRX in
4516 "include/net.h") for EEPRO100 based boards (especially SP8240)
4517 which showed "Receiver is not ready" errors when U-Boot was
4518 processing the receive buffers slower than the network controller
4519 was filling them.
4520
wdenkeb9401e2002-11-11 02:11:37 +00004521* Patch by Andreas Oberritter, 09 Nov 2002:
4522 Change behaviour of NetLoop(): return -1 for errors, filesize
4523 otherwise; return code 0 is valid an means no file loaded - in this
4524 case the environment still gets updated!
4525
4526* Patches by Jon Diekema, 9 Nov 2002:
4527 - improve ADC/DAC clocking on the SACSng board to align
4528 the failing edges of LRCLK and SCLK
4529 - sbc8260 configuration tweaks
4530 - add status LED support for 82xx systems
4531 - wire sspi/sspo commands into command handler; improved error
4532 handlering
4533 - add timestamp support and alternate memory test to the
4534 SACSng configuration
4535
4536* Patch by Vince Husovsky, 7 Nov 2002:
wdenk7f6c2cb2002-11-10 22:06:23 +00004537 Add "-n" to linker options to get rid of "Not enough room for
4538 program headers" problem
4539
4540* Patch by David Müller, 05 Nov 2002
4541 Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
4542 so we can use an already existing name
4543
4544* Patch by Pierre Aubert, 05 Nov 2002
4545 Hardware relatied improvments in FDC boot code
4546
4547* Patch by Holger Schurig, 5 Nov 2002:
4548 Make the PXA really change it's frequency
4549
4550* Patch by Pierre Aubert, 05 Nov 2002
4551 Add support for slave serial Spartan 2 FPGAs
4552
4553* Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet
4554 drivers
4555
wdenk56f94be2002-11-05 16:35:14 +00004556* Add support for log buffer which can be passed to Linux kernel's
4557 syslog mechanism; used especially for POST results.
4558
4559* Patch by Klaus Heydeck, 31 Oct 2002:
4560 Add initial support for kup4k board
4561
wdenk384ae022002-11-05 00:17:55 +00004562* Patch by Robert Schwebel, 04 Nov 2002:
4563 - use watchdog to reset PXA250 systems
4564 - added progress callbacks to (some of the) ARM code
4565 - update for Cogent CSB226 board
4566
4567* Add support for FPS860 board
4568
wdenke95b61c2002-11-04 16:02:40 +00004569* Patch by Guillaume Alexandre,, 04 Nov 2002:
4570 Improve PCI access on 32-bits Compact PCI bus
4571
wdenk24ee89b2002-11-03 17:56:27 +00004572* Fix mdelay() on TRAB - this was still the debugging version with
4573 seconds instead of ms.
4574
4575* Patch by Robert Schwebel, 1 Nov 2002:
4576 XScale related cleanup (affects all ARM boards)
4577
4578* Cleanup of names and README.
wdenkcc1c8a12002-11-02 22:58:18 +00004579
4580======================================================================
wdenk24ee89b2002-11-03 17:56:27 +00004581Notes for U-Boot 0.1.0:
wdenkcc1c8a12002-11-02 22:58:18 +00004582======================================================================
4583
4584This is the initial version of "Das U-Boot", the Universal Boot Loader.
4585
4586It is based on version 2.0.0 (the "Halloween Release") of PPCBoot.
4587For information about the history of the project please see the
4588PPCBoot project page at http://sourceforge.net/projects/ppcboot
4589
4590======================================================================