1. 5c45b16 ARM: zynq: DT: Update zc770 dtses by Michal Simek · 9 years ago
  2. 91f9f17 ARM: zynq: DT: Add zc702 pushbuttons to DT as gpio-keys by Michal Simek · 9 years ago
  3. d50cb3d ARM: zynq: DT: Add missing interrupt for L2 pl310 by Michal Simek · 9 years ago
  4. b4e9eaf ARM: zynq: DT: Get rid of ps-clk-frequency by Michal Simek · 9 years ago
  5. 05e7ca6 ARM: zynq: DT: Update years in copyright by Michal Simek · 9 years ago
  6. 999667c ARM: zynq: DT: Sync zc702/zc706/zed/zybo DT with kernel by Michal Simek · 9 years ago
  7. 461c388 ARM: zynq: DT: Add reference to bus node by Michal Simek · 9 years ago
  8. e913ce2 ARM: zynq: DT: Add pinctrl node by Michal Simek · 9 years ago
  9. 5ee236a ARM: zynq: DT: Cleanup address-cells and size-cells by Michal Simek · 9 years ago
  10. b346bd1 ARM: zynq: DT: Clean up timer device tree nodes by Michal Simek · 9 years ago
  11. 7e16336 ARM: zynq: DT: Use the zynq binding with macb by Michal Simek · 9 years ago
  12. 08305fe ARM: zynq: DT: Fix GEM register area size by Michal Simek · 9 years ago
  13. 40b383f spi: Fix zynq SPI binding by Michal Simek · 9 years ago
  14. 3ffcdc7 ARM: zynq: DT: Remove 222 MHz OPP by Michal Simek · 9 years ago
  15. 8a8c46a ARM: zynq: DT: Migrate UART to Cadence binding by Michal Simek · 9 years ago
  16. bece06c ARM: zynq: DT: Add a fixed regulator for CPU voltage by Michal Simek · 9 years ago
  17. fb1a506 ARM: zynq: DT: Add missing nodes to DTSI by Michal Simek · 9 years ago
  18. a0cb47f ARM: zynq: DT: Use the right names for nodes by Michal Simek · 9 years ago
  19. 225bf9a zynqmp: Add support for IP detection via SLCR by Michal Simek · 9 years ago
  20. fb10116 zynqmp: mp: Simplify set_r5_start handling by Michal Simek · 10 years ago
  21. 0b54a9d zynqmp: Define ep config for ZynqMP by Siva Durga Prasad Paladugu · 10 years ago
  22. 7558000 zynqmp: Kconfig: Move zynqmp Kconfig by Siva Durga Prasad Paladugu · 10 years ago
  23. 2647394 Merge branch 'master' of http://git.denx.de/u-boot-sunxi by Tom Rini · 9 years ago
  24. a51c832 sunxi: ga10h: Enable both otg and regular usb host controllers by Hans de Goede · 9 years ago
  25. 9ecce97 sunxi: musb: Stop treating not having a vbus-det gpio as an error by Hans de Goede · 9 years ago
  26. 91183ba sunxi: musb: Use device-model for musb host mode by Hans de Goede · 9 years ago
  27. d42faf3 sunxi: musb: Move musb config and platdata to the sunxi-musb glue by Hans de Goede · 9 years ago
  28. 48c06c9 sunxi: usb-phy: Add support for reading otg id pin value by Hans de Goede · 10 years ago
  29. de1502c sunxi: Enable CMD_USB and USB_STORAGE by default on sunxi by Hans de Goede · 9 years ago
  30. 4536882 sunxi: Update selects in arch/arm/Kconfig for DM conversions by Tom Rini · 9 years ago
  31. d08980d sunxi: Remove bogus uart entry from utoo-p66 dts file by Hans de Goede · 9 years ago
  32. 6f4e050 Merge git://git.denx.de/u-boot-usb by Tom Rini · 9 years ago
  33. a151403 sunxi: spl: Detect at runtime where SPL was read from by Daniel Kochmański · 10 years ago
  34. 645c48f sunxi: Create helper function veryfing valid boot signature on MMC by Daniel Kochmański · 10 years ago
  35. 8ed43b9 arm: mvebu: Add SPL SDIO/MMC boot support by Stefan Roese · 9 years ago
  36. 413978d Merge git://git.denx.de/u-boot-uniphier by Tom Rini · 9 years ago
  37. f1d7945 ARM: dts: UniPhier: add I2C ch4 device node for PH1-sLD3 by Masahiro Yamada · 9 years ago
  38. 3365b4e ARM: UniPhier: add PH1-sLD3 SoC support by Masahiro Yamada · 9 years ago
  39. 6b71e6d ARM: dts: UniPhier: add device-specific compatible string for EEPROM by Masahiro Yamada · 9 years ago
  40. 3c9cc70 Merge git://git.denx.de/u-boot-marvell by Tom Rini · 9 years ago
  41. ad6ac7a arm: mvebu: a38x: Use correct PEX register access macros by Stefan Roese · 10 years ago
  42. ff9112d arm: mvebu: drivers/ddr: Move Armada XP DDR init code into new directory by Stefan Roese · 10 years ago
  43. edb4702 arm: mvebu: Add Armada 38x SERDES / PHY init code from Marvell bin_hdr by Stefan Roese · 10 years ago
  44. 29b103c arm: mvebu: serdes: Move Armada XP SERDES / PHY init code into new directory by Stefan Roese · 10 years ago
  45. 9f62b44 arm: mvebu: Disable MMU before changing register base address by Stefan Roese · 10 years ago
  46. e3cccf9 arm: mvebu: spl.c: Add call to board_early_init_f() by Stefan Roese · 10 years ago
  47. 2142770 arm: mvebu: Use default reg base address for SPL on A38x by Stefan Roese · 10 years ago
  48. ade741b arm: mvebu: Call timer_init early before PHY and DDR init by Stefan Roese · 9 years ago
  49. e863f7f arm: mvebu: add Armada XP SATA support by Anton Schubert · 9 years ago
  50. 854cbd2 usb: gadget: bcm_udc_otg files by Jiandong Zheng · 9 years ago
  51. 17da3c0 usb: Fastboot function config for better consistency with other functions by Paul Kocialkowski · 10 years ago
  52. 909a1ab include: usb: Move USB controller base address mapping by Nikhil Badola · 9 years ago
  53. d09e401 arch: arm: fsl: Add XHCI support for LS1021A by Ramneek Mehresh · 10 years ago
  54. 30db918 zynq: Rename struct clk_ops to zynq_clk_ops by Simon Glass · 9 years ago
  55. 4eae498 dm: arm: Put driver model I2C drivers before legacy ones by Simon Glass · 9 years ago
  56. fa78e0a dm: Reduce SPL device tree size by Simon Glass · 9 years ago
  57. db14f11 armv8/fsl-lsch3: Fix TCR_EL3 for the final MMU setup. by Zhichun Hua · 9 years ago
  58. 21a257b armv8: Fix TCR macros for shareability attribute by Zhichun Hua · 9 years ago
  59. e71a980 armv8/ls2085aqds: DSPI pin muxing configure through QIXIS by Haikun Wang · 9 years ago
  60. b0e209d armv8/ls2085a: Enable DSPI get input clk form 'mxc_get_clock' by Haikun Wang · 9 years ago
  61. 193e7e5 arm/dts/ls2085a: Add dts files for LS2085AQDS and LS2085ARDB by Haikun Wang · 9 years ago
  62. fe69a0e arm/dts/ls2085a: Add DSPI dts node by Haikun Wang · 9 years ago
  63. d941f71 arm/dts/ls2085a: Bring in ls2085a dts files from linux kernel by Haikun Wang · 9 years ago
  64. 88c857d arm/ls102xa: Add little-endian mode support for audio IPs by Alison Wang · 10 years ago
  65. 340848b arm/ls102xa: Add PSCI support for ls102xa by Wang Dongsheng · 10 years ago
  66. 972af2a ARMv7: Factor out reusable timer_wait from sunxi/psci_sun7i.S by Wang Dongsheng · 10 years ago
  67. 49a5e42 arm: ls1021a: Remove the inappropriate use of the function 'sprintf' by Alison Wang · 10 years ago
  68. 70e52d2 armv8/fsl-lsch3: device tree fixups for PCI stream IDs by Stuart Yoder · 9 years ago
  69. 39da644 armv8/fsl-lsch3: partition stream IDs by Stuart Yoder · 9 years ago
  70. f299b5b arm/errata: Update required bits for A57 cores erratas by Bhupesh Sharma · 10 years ago
  71. 092da48 armv8/ls2085a: Update SoC README for DDR layout by Prabhakar Kushwaha · 10 years ago
  72. 2262966 armv8/fsl-ch3: Add support to print SoC personality by Prabhakar Kushwaha · 10 years ago
  73. d4c711f armv8/fsl-lsch3: Fix DDR speed message by York Sun · 10 years ago
  74. 5be3b44 armv8/ls2085a: call ft_pcie_setup() to change dts status by Prabhakar Kushwaha · 10 years ago
  75. 4905dfc Merge branch 'master' of git://git.denx.de/u-boot-spi by Tom Rini · 9 years ago
  76. fe11ae2 usb: Add EHCI support for Armada 38x (mvebu) by Stefan Roese · 9 years ago
  77. 4d991cb arm: mvebu: Add SATA/SCSI (AHCI) support for Armada A38x by Stefan Roese · 9 years ago
  78. 7f1adcd arm: mvebu: Add SDIO/SDHCI support for Armada A38x by Stefan Roese · 9 years ago
  79. 8fa2e20 sunxi: Adjust Ippo_q8h_v1_2_a33_1024x600 dts filename to match the upstream kernel by Hans de Goede · 9 years ago
  80. 3cbb15d Merge branch 'master' of git://git.denx.de/u-boot-arm by Tom Rini · 9 years ago
  81. b69969b Revert "break build if it would produce broken binary" by Simon Glass · 10 years ago
  82. 1251d51 arm: Add ENTRY/ENDPROC to private libgcc functions by Simon Glass · 10 years ago
  83. 6f43ba7 Merge branch 'u-boot/master' into 'u-boot-arm/master' by Albert ARIBAUD · 9 years ago
  84. 003b09d armv7: better comment in start.S by Pavel Machek · 10 years ago
  85. 37f4d0e Merge branch 'master' of http://git.denx.de/u-boot-sunxi by Tom Rini · 9 years ago
  86. 4e87398 sunxi: Add Sinlinx SinA33 defconfig by Chen-Yu Tsai · 9 years ago
  87. d8656b6 sunxi: Sync sun8i dts files with the linux kernel by Chen-Yu Tsai · 9 years ago
  88. e506889 sunxi: Add support for UART0 in PB pin group on A33 by Chen-Yu Tsai · 9 years ago
  89. dec7c84 sunxi: rsb: Enable R_PIO clock before configuring external pins by Chen-Yu Tsai · 9 years ago
  90. 6ad8c74 sunxi: hardware-feature-specific function index defines for PORT F UART0 by Chen-Yu Tsai · 9 years ago
  91. 808bf7c Merge branch 'master' of git://www.denx.de/git/u-boot-imx by Tom Rini · 9 years ago
  92. 8097cba spi: cadence_qspi: add device tree binding doc by Vikas Manocha · 9 years ago
  93. 90a2f71 spi: cadence_qspi: get sram size from device tree by Vikas Manocha · 9 years ago
  94. 51d5583 stv0991: configure device tree for cadence qspi & flash by Vikas Manocha · 9 years ago
  95. e67abca stv0991: enable cadence qspi controller & spi flash by Vikas Manocha · 9 years ago
  96. 54afb50 stv0991: configure clock & pad muxing for qspi by Vikas Manocha · 9 years ago
  97. 891b487 Merge branch 'master' of git://git.denx.de/u-boot-spi by Tom Rini · 9 years ago
  98. 8101b98 ARM: UniPhier: add IDs for PH1-Pro5, ProXstream2, PH1-LD6b by Masahiro Yamada · 9 years ago
  99. 13b2ba1 ARM: dts: UniPhier: re-license device tree files under GPLv2+/X11 by Masahiro Yamada · 9 years ago
  100. edcfaeb ARM: dts: UniPhier: sync device trees with the Linux kernel by Masahiro Yamada · 9 years ago