| /* |
| * Copyright (c) 2016-2018 The Linux Foundation. All rights reserved. |
| * |
| * Previously licensed under the ISC license by Qualcomm Atheros, Inc. |
| * |
| * |
| * Permission to use, copy, modify, and/or distribute this software for |
| * any purpose with or without fee is hereby granted, provided that the |
| * above copyright notice and this permission notice appear in all |
| * copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL |
| * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE |
| * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL |
| * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR |
| * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER |
| * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR |
| * PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| /* |
| * This file was originally distributed by Qualcomm Atheros, Inc. |
| * under proprietary terms before Copyright ownership was assigned |
| * to the Linux Foundation. |
| */ |
| |
| /* |
| * This file contains the API definitions for the Unified Wireless Module |
| * Interface (WMI). |
| */ |
| |
| #ifndef _WMI_UNIFIED_PARAM_H_ |
| #define _WMI_UNIFIED_PARAM_H_ |
| |
| #include <wlan_scan_public_structs.h> |
| #ifdef CONVERGED_TDLS_ENABLE |
| #include <wlan_tdls_public_structs.h> |
| #endif |
| |
| #define MAC_MAX_KEY_LENGTH 32 |
| #define MAC_PN_LENGTH 8 |
| #define MAX_MAC_HEADER_LEN 32 |
| #define MIN_MAC_HEADER_LEN 24 |
| #define QOS_CONTROL_LEN 2 |
| |
| #define IEEE80211_ADDR_LEN 6 /* size of 802.11 address */ |
| #define WMI_MAC_MAX_SSID_LENGTH 32 |
| #define WMI_SCAN_MAX_NUM_SSID 0x0A |
| #define mgmt_tx_dl_frm_len 64 |
| #define WMI_SMPS_MASK_LOWER_16BITS 0xFF |
| #define WMI_SMPS_MASK_UPPER_3BITS 0x7 |
| #define WMI_SMPS_PARAM_VALUE_S 29 |
| #define WMI_MAX_NUM_ARGS 8 |
| /* The size of the utc time in bytes. */ |
| #define WMI_SIZE_UTC_TIME (10) |
| /* The size of the utc time error in bytes. */ |
| #define WMI_SIZE_UTC_TIME_ERROR (5) |
| #define WMI_MCC_MIN_CHANNEL_QUOTA 20 |
| #define WMI_MCC_MAX_CHANNEL_QUOTA 80 |
| #define WMI_MCC_MIN_NON_ZERO_CHANNEL_LATENCY 30 |
| #define WMI_BEACON_TX_BUFFER_SIZE (512) |
| #define WMI_WIFI_SCANNING_MAC_OUI_LENGTH 3 |
| #define WMI_EXTSCAN_MAX_SIGNIFICANT_CHANGE_APS 64 |
| #define WMI_RSSI_THOLD_DEFAULT -300 |
| #define WMI_NLO_FREQ_THRESH 1000 |
| #define WMI_SEC_TO_MSEC(sec) (sec * 1000) |
| #define WMI_MSEC_TO_USEC(msec) (msec * 1000) |
| #define WMI_ETH_LEN 64 |
| #define WMI_QOS_NUM_TSPEC_MAX 2 |
| #define WMI_QOS_NUM_AC_MAX 4 |
| #define WMI_IPV4_ADDR_LEN 4 |
| #define WMI_KEEP_ALIVE_NULL_PKT 1 |
| #define WMI_KEEP_ALIVE_UNSOLICIT_ARP_RSP 2 |
| #define WMI_MAC_MAX_KEY_LENGTH 32 |
| #define WMI_KRK_KEY_LEN 16 |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| #define WMI_BTK_KEY_LEN 32 |
| #define WMI_ROAM_R0KH_ID_MAX_LEN 48 |
| #define WMI_ROAM_SCAN_PSK_SIZE 32 |
| #endif |
| #define WMI_NOISE_FLOOR_DBM_DEFAULT (-96) |
| #define WMI_EXTSCAN_MAX_HOTLIST_SSIDS 8 |
| #define WMI_ROAM_MAX_CHANNELS 80 |
| #ifdef FEATURE_WLAN_EXTSCAN |
| #define WMI_MAX_EXTSCAN_MSG_SIZE 1536 |
| #define WMI_EXTSCAN_REST_TIME 100 |
| #define WMI_EXTSCAN_MAX_SCAN_TIME 50000 |
| #define WMI_EXTSCAN_BURST_DURATION 150 |
| #endif |
| #define WMI_SCAN_NPROBES_DEFAULT (2) |
| #define WMI_SEC_TO_MSEC(sec) (sec * 1000) /* sec to msec */ |
| #define WMI_MSEC_TO_USEC(msec) (msec * 1000) /* msec to usec */ |
| #define WMI_NLO_FREQ_THRESH 1000 /* in MHz */ |
| |
| #define WMI_SVC_MSG_MAX_SIZE 1536 |
| #define MAX_UTF_EVENT_LENGTH 2048 |
| #define MAX_WMI_UTF_LEN 252 |
| #define MAX_WMI_QVIT_LEN 252 |
| #define THERMAL_LEVELS 4 |
| #define WMI_HOST_BCN_FLT_MAX_SUPPORTED_IES 256 |
| #define WMI_HOST_BCN_FLT_MAX_ELEMS_IE_LIST \ |
| (WMI_HOST_BCN_FLT_MAX_SUPPORTED_IES/32) |
| #define LTEU_MAX_BINS 10 |
| #define ATF_ACTIVED_MAX_CLIENTS 50 |
| #define ATF_ACTIVED_MAX_ATFGROUPS 8 |
| #define CTL_5G_SIZE 1536 |
| #define CTL_2G_SIZE 684 |
| #define MAX_CTL_SIZE (CTL_5G_SIZE > CTL_2G_SIZE ? CTL_5G_SIZE : CTL_2G_SIZE) |
| #define IEEE80211_MICBUF_SIZE (8+8) |
| #define IEEE80211_TID_SIZE 17 |
| #define WME_NUM_AC 4 |
| #define SMART_ANT_MODE_SERIAL 0 |
| #define SMART_ANT_MODE_PARALLEL 1 |
| #define IEEE80211_WEP_NKID 4 /* number of key ids */ |
| #define WPI_IV_LEN 16 |
| #define WMI_SCAN_MAX_NUM_BSSID 10 |
| #define MAX_CHANS 1023 |
| #define TARGET_OEM_CONFIGURE_LCI 0x0A |
| #define RTT_LCI_ALTITUDE_MASK 0x3FFFFFFF |
| #define TARGET_OEM_CONFIGURE_LCR 0x09 |
| #define RTT_TIMEOUT_MS 180 |
| #define MAX_SUPPORTED_RATES 128 |
| #define WMI_HOST_MAX_BUFFER_SIZE 1712 |
| #define WMI_HAL_MAX_SANTENNA 4 |
| #define WMI_HOST_PDEV_VI_PRIORITY_BIT (1<<2) |
| #define WMI_HOST_PDEV_BEACON_PRIORITY_BIT (1<<4) |
| #define WMI_HOST_PDEV_MGMT_PRIORITY_BIT (1<<5) |
| |
| #define FIPS_ALIGN 4 |
| #define FIPS_ALIGNTO(__addr, __to) \ |
| ((((unsigned long int)(__addr)) + (__to) - 1) & ~((__to) - 1)) |
| #define FIPS_IS_ALIGNED(__addr, __to) \ |
| (!(((unsigned long int)(__addr)) & ((__to)-1))) |
| |
| #define WMI_HOST_MAX_SERIAL_ANTENNA 2 |
| #define WMI_SMART_ANT_MAX_RATE_SERIES 2 |
| |
| #define WMI_HOST_F_MS(_v, _f) \ |
| (((_v) & (_f)) >> (_f##_S)) |
| |
| #define WMI_HOST_F_RMW(_var, _v, _f) \ |
| do { \ |
| (_var) &= ~(_f); \ |
| (_var) |= (((_v) << (_f##_S)) & (_f)); \ |
| } while (0) |
| |
| /* vdev capabilities bit mask */ |
| #define WMI_HOST_VDEV_BEACON_SUPPORT 0x1 |
| #define WMI_HOST_VDEV_WDS_LRN_ENABLED 0x2 |
| #define WMI_HOST_VDEV_VOW_ENABLED 0x4 |
| #define WMI_HOST_VDEV_IS_BEACON_SUPPORTED(param) \ |
| ((param) & WMI_HOST_VDEV_BEACON_SUPPORT) |
| #define WMI_HOST_VDEV_IS_WDS_LRN_ENABLED(param) \ |
| ((param) & WMI_HOST_VDEV_WDS_LRN_ENABLED) |
| #define WMI_HOST_VDEV_IS_VOW_ENABLED(param) \ |
| ((param) & WMI_HOST_VDEV_VOW_ENABLED) |
| |
| /* TXBF capabilities masks */ |
| #define WMI_HOST_TXBF_CONF_SU_TX_BFEE_S 0 |
| #define WMI_HOST_TXBF_CONF_SU_TX_BFEE_M 0x1 |
| #define WMI_HOST_TXBF_CONF_SU_TX_BFEE \ |
| (WMI_HOST_TXBF_CONF_SU_TX_BFEE_M << WMI_HOST_TXBF_CONF_SU_TX_BFEE_S) |
| #define WMI_HOST_TXBF_CONF_SU_TX_BFEE_GET(x) \ |
| WMI_HOST_F_MS(x, WMI_HOST_TXBF_CONF_SU_TX_BFEE) |
| #define WMI_HOST_TXBF_CONF_SU_TX_BFEE_SET(x, z) \ |
| WMI_HOST_F_RMW(x, z, WMI_HOST_TXBF_CONF_SU_TX_BFEE) |
| |
| |
| #define WMI_HOST_TXBF_CONF_MU_TX_BFEE_S 1 |
| #define WMI_HOST_TXBF_CONF_MU_TX_BFEE_M 0x1 |
| #define WMI_HOST_TXBF_CONF_MU_TX_BFEE \ |
| (WMI_HOST_TXBF_CONF_MU_TX_BFEE_M << WMI_HOST_TXBF_CONF_MU_TX_BFEE_S) |
| #define WMI_HOST_TXBF_CONF_MU_TX_BFEE_GET(x) \ |
| WMI_HOST_F_MS(x, WMI_HOST_TXBF_CONF_MU_TX_BFEE) |
| #define WMI_HOST_TXBF_CONF_MU_TX_BFEE_SET(x, z) \ |
| WMI_HOST_F_RMW(x, z, WMI_HOST_TXBF_CONF_MU_TX_BFEE) |
| |
| #define WMI_HOST_TXBF_CONF_SU_TX_BFER_S 2 |
| #define WMI_HOST_TXBF_CONF_SU_TX_BFER_M 0x1 |
| #define WMI_HOST_TXBF_CONF_SU_TX_BFER \ |
| (WMI_HOST_TXBF_CONF_SU_TX_BFER_M << WMI_HOST_TXBF_CONF_SU_TX_BFER_S) |
| #define WMI_HOST_TXBF_CONF_SU_TX_BFER_GET(x) \ |
| WMI_HOST_F_MS(x, WMI_HOST_TXBF_CONF_SU_TX_BFER) |
| #define WMI_HOST_TXBF_CONF_SU_TX_BFER_SET(x, z) \ |
| WMI_HOST_F_RMW(x, z, WMI_HOST_TXBF_CONF_SU_TX_BFER) |
| |
| #define WMI_HOST_TXBF_CONF_MU_TX_BFER_S 3 |
| #define WMI_HOST_TXBF_CONF_MU_TX_BFER_M 0x1 |
| #define WMI_HOST_TXBF_CONF_MU_TX_BFER \ |
| (WMI_HOST_TXBF_CONF_MU_TX_BFER_M << WMI_HOST_TXBF_CONF_MU_TX_BFER_S) |
| #define WMI_HOST_TXBF_CONF_MU_TX_BFER_GET(x) \ |
| WMI_HOST_F_MS(x, WMI_HOST_TXBF_CONF_MU_TX_BFER) |
| #define WMI_HOST_TXBF_CONF_MU_TX_BFER_SET(x, z) \ |
| WMI_HOST_F_RMW(x, z, WMI_HOST_TXBF_CONF_MU_TX_BFER) |
| |
| #define WMI_HOST_TXBF_CONF_STS_CAP_S 4 |
| #define WMI_HOST_TXBF_CONF_STS_CAP_M 0x7 |
| #define WMI_HOST_TXBF_CONF_STS_CAP \ |
| (WMI_HOST_TXBF_CONF_STS_CAP_M << WMI_HOST_TXBF_CONF_STS_CAP_S) |
| #define WMI_HOST_TXBF_CONF_STS_CAP_GET(x) \ |
| WMI_HOST_F_MS(x, WMI_HOST_TXBF_CONF_STS_CAP); |
| #define WMI_HOST_TXBF_CONF_STS_CAP_SET(x, z) \ |
| WMI_HOST_F_RMW(x, z, WMI_HOST_TXBF_CONF_STS_CAP) |
| |
| #define WMI_HOST_TXBF_CONF_IMPLICIT_BF_S 7 |
| #define WMI_HOST_TXBF_CONF_IMPLICIT_BF_M 0x1 |
| #define WMI_HOST_TXBF_CONF_IMPLICIT_BF \ |
| (WMI_HOST_TXBF_CONF_IMPLICIT_BF_M << WMI_HOST_TXBF_CONF_IMPLICIT_BF_S) |
| #define WMI_HOST_TXBF_CONF_IMPLICIT_BF_GET(x) \ |
| WMI_HOST_F_MS(x, WMI_HOST_TXBF_CONF_IMPLICIT_BF) |
| #define WMI_HOST_TXBF_CONF_IMPLICIT_BF_SET(x, z) \ |
| WMI_HOST_F_RMW(x, z, WMI_HOST_TXBF_CONF_IMPLICIT_BF) |
| |
| #define WMI_HOST_TXBF_CONF_BF_SND_DIM_S 8 |
| #define WMI_HOST_TXBF_CONF_BF_SND_DIM_M 0x7 |
| #define WMI_HOST_TXBF_CONF_BF_SND_DIM \ |
| (WMI_HOST_TXBF_CONF_BF_SND_DIM_M << WMI_HOST_TXBF_CONF_BF_SND_DIM_S) |
| #define WMI_HOST_TXBF_CONF_BF_SND_DIM_GET(x) \ |
| WMI_HOST_F_MS(x, WMI_HOST_TXBF_CONF_BF_SND_DIM) |
| #define WMI_HOST_TXBF_CONF_BF_SND_DIM_SET(x, z) \ |
| WMI_HOST_F_RMW(x, z, WMI_HOST_TXBF_CONF_BF_SND_DIM) |
| |
| /* HE BF capabilities mask */ |
| #define WMI_HOST_HE_BF_CONF_SU_BFEE_S 0 |
| #define WMI_HOST_HE_BF_CONF_SU_BFEE_M 0x1 |
| #define WMI_HOST_HE_BF_CONF_SU_BFEE \ |
| (WMI_HOST_HE_BF_CONF_SU_BFEE_M << WMI_HOST_HE_BF_CONF_SU_BFEE_S) |
| #define WMI_HOST_HE_BF_CONF_SU_BFEE_GET(x) \ |
| WMI_HOST_F_MS(x, WMI_HOST_HE_BF_CONF_SU_BFEE) |
| #define WMI_HOST_HE_BF_CONF_SU_BFEE_SET(x, z) \ |
| WMI_HOST_F_RMW(x, z, WMI_HOST_HE_BF_CONF_SU_BFEE) |
| |
| #define WMI_HOST_HE_BF_CONF_SU_BFER_S 1 |
| #define WMI_HOST_HE_BF_CONF_SU_BFER_M 0x1 |
| #define WMI_HOST_HE_BF_CONF_SU_BFER \ |
| (WMI_HOST_HE_BF_CONF_SU_BFER_M << WMI_HOST_HE_BF_CONF_SU_BFER_S) |
| #define WMI_HOST_HE_BF_CONF_SU_BFER_GET(x) \ |
| WMI_HOST_F_MS(x, WMI_HOST_HE_BF_CONF_SU_BFER) |
| #define WMI_HOST_HE_BF_CONF_SU_BFER_SET(x, z) \ |
| WMI_HOST_F_RMW(x, z, WMI_HOST_HE_BF_CONF_SU_BFER) |
| |
| #define WMI_HOST_HE_BF_CONF_MU_BFEE_S 2 |
| #define WMI_HOST_HE_BF_CONF_MU_BFEE_M 0x1 |
| #define WMI_HOST_HE_BF_CONF_MU_BFEE \ |
| (WMI_HOST_HE_BF_CONF_MU_BFEE_M << WMI_HOST_HE_BF_CONF_MU_BFEE_S) |
| #define WMI_HOST_HE_BF_CONF_MU_BFEE_GET(x) \ |
| WMI_HOST_F_MS(x, WMI_HOST_HE_BF_CONF_MU_BFEE) |
| #define WMI_HOST_HE_BF_CONF_MU_BFEE_SET(x, z) \ |
| WMI_HOST_F_RMW(x, z, WMI_HOST_HE_BF_CONF_MU_BFEE) |
| |
| #define WMI_HOST_HE_BF_CONF_MU_BFER_S 3 |
| #define WMI_HOST_HE_BF_CONF_MU_BFER_M 0x1 |
| #define WMI_HOST_HE_BF_CONF_MU_BFER \ |
| (WMI_HOST_HE_BF_CONF_MU_BFER_M << WMI_HOST_HE_BF_CONF_MU_BFER_S) |
| #define WMI_HOST_HE_BF_CONF_MU_BFER_GET(x) \ |
| WMI_HOST_F_MS(x, WMI_HOST_HE_BF_CONF_MU_BFER) |
| #define WMI_HOST_HE_BF_CONF_MU_BFER_SET(x, z) \ |
| WMI_HOST_F_RMW(x, z, WMI_HOST_HE_BF_CONF_MU_BFER) |
| |
| #define WMI_HOST_HE_BF_CONF_DL_OFDMA_S 4 |
| #define WMI_HOST_HE_BF_CONF_DL_OFDMA_M 0x1 |
| #define WMI_HOST_HE_BF_CONF_DL_OFDMA \ |
| (WMI_HOST_HE_BF_CONF_DL_OFDMA_M << WMI_HOST_HE_BF_CONF_DL_OFDMA_S) |
| #define WMI_HOST_HE_BF_CONF_DL_OFDMA_GET(x) \ |
| WMI_HOST_F_MS(x, WMI_HOST_HE_BF_CONF_DL_OFDMA) |
| #define WMI_HOST_HE_BF_CONF_DL_OFDMA_SET(x, z) \ |
| WMI_HOST_F_RMW(x, z, WMI_HOST_HE_BF_CONF_DL_OFDMA) |
| |
| #define WMI_HOST_HE_BF_CONF_UL_OFDMA_S 5 |
| #define WMI_HOST_HE_BF_CONF_UL_OFDMA_M 0x1 |
| #define WMI_HOST_HE_BF_CONF_UL_OFDMA \ |
| (WMI_HOST_HE_BF_CONF_UL_OFDMA_M << WMI_HOST_HE_BF_CONF_UL_OFDMA_S) |
| #define WMI_HOST_HE_BF_CONF_UL_OFDMA_GET(x) \ |
| WMI_HOST_F_MS(x, WMI_HOST_HE_BF_CONF_UL_OFDMA) |
| #define WMI_HOST_HE_BF_CONF_UL_OFDMA_SET(x, z) \ |
| WMI_HOST_F_RMW(x, z, WMI_HOST_HE_BF_CONF_UL_OFDMA) |
| |
| #define WMI_HOST_HE_BF_CONF_UL_MUMIMO_S 6 |
| #define WMI_HOST_HE_BF_CONF_UL_MUMIMO_M 0x1 |
| #define WMI_HOST_HE_BF_CONF_UL_MUMIMO \ |
| (WMI_HOST_HE_BF_CONF_UL_MUMIMO_M << WMI_HOST_HE_BF_CONF_UL_MUMIMO_S) |
| #define WMI_HOST_HE_BF_CONF_UL_MUMIMO_GET(x) \ |
| WMI_HOST_F_MS(x, WMI_HOST_HE_BF_CONF_UL_MUMIMO) |
| #define WMI_HOST_HE_BF_CONF_UL_MUMIMO_SET(x, z) \ |
| WMI_HOST_F_RMW(x, z, WMI_HOST_HE_BF_CONF_UL_MUMIMO) |
| |
| #define WMI_HOST_TPC_RATE_MAX 160 |
| #define WMI_HOST_TPC_TX_NUM_CHAIN 4 |
| #define WMI_HOST_RXG_CAL_CHAN_MAX 4 |
| #define WMI_HOST_MAX_NUM_CHAINS 4 |
| #define WMI_MAX_NUM_OF_RATE_THRESH 4 |
| |
| #define WMI_HOST_PDEV_MAX_VDEVS 17 |
| |
| /* for QC98XX only */ |
| /*6 modes (A, HT20, HT40, VHT20, VHT40, VHT80) * 3 reg dommains |
| */ |
| #define WMI_HOST_NUM_CTLS_5G 18 |
| /*6 modes (B, G, HT20, HT40, VHT20, VHT40) * 3 reg domains */ |
| #define WMI_HOST_NUM_CTLS_2G 18 |
| #define WMI_HOST_NUM_BAND_EDGES_5G 8 |
| #define WMI_HOST_NUM_BAND_EDGES_2G 4 |
| |
| /*Beelinier 5G*/ |
| #define WMI_HOST_NUM_CTLS_5G_11A 9 |
| #define WMI_HOST_NUM_BAND_EDGES_5G_11A 25 |
| #define WMI_HOST_NUM_CTLS_5G_HT20 24 |
| #define WMI_HOST_NUM_BAND_EDGES_5G_HT20 25 |
| #define WMI_HOST_NUM_CTLS_5G_HT40 18 |
| #define WMI_HOST_NUM_BAND_EDGES_5G_HT40 12 |
| #define WMI_HOST_NUM_CTLS_5G_HT80 18 |
| #define WMI_HOST_NUM_BAND_EDGES_5G_HT80 6 |
| #define WMI_HOST_NUM_CTLS_5G_HT160 9 |
| #define WMI_HOST_NUM_BAND_EDGES_5G_HT160 2 |
| |
| /* Beeliner 2G */ |
| #define WMI_HOST_NUM_CTLS_2G_11B 6 |
| #define WMI_HOST_NUM_BAND_EDGES_2G_11B 9 |
| #define WMI_HOST_NUM_CTLS_2G_20MHZ 30 |
| #define WMI_HOST_NUM_BAND_EDGES_2G_20MHZ 11 |
| #define WMI_HOST_NUM_CTLS_2G_40MHZ 18 |
| #define WMI_HOST_NUM_BAND_EDGES_2G_40MHZ 6 |
| |
| /* for QC98XX only */ |
| #define WMI_HOST_TX_NUM_CHAIN 0x3 |
| #define WMI_HOST_TPC_REGINDEX_MAX 4 |
| #define WMI_HOST_ARRAY_GAIN_NUM_STREAMS 2 |
| |
| #include "qdf_atomic.h" |
| |
| #ifdef BIG_ENDIAN_HOST |
| /* This API is used in copying in elements to WMI message, |
| since WMI message uses multilpes of 4 bytes, This API |
| converts length into multiples of 4 bytes, and performs copy |
| */ |
| #define WMI_HOST_IF_MSG_COPY_CHAR_ARRAY(destp, srcp, len) do { \ |
| int j; \ |
| u_int32_t *src, *dest; \ |
| src = (u_int32_t *)srcp; \ |
| dest = (u_int32_t *)destp; \ |
| for (j = 0; j < roundup(len, sizeof(u_int32_t))/4; j++) { \ |
| *(dest+j) = qdf_le32_to_cpu(*(src+j)); \ |
| } \ |
| } while (0) |
| #else |
| |
| #define WMI_HOST_IF_MSG_COPY_CHAR_ARRAY(destp, srcp, len) OS_MEMCPY(destp,\ |
| srcp, len) |
| |
| #endif |
| |
| /** macro to convert MAC address from WMI word format to char array */ |
| #define WMI_HOST_MAC_ADDR_TO_CHAR_ARRAY(pwmi_mac_addr, c_macaddr) do { \ |
| (c_macaddr)[0] = ((pwmi_mac_addr)->mac_addr31to0) & 0xff; \ |
| (c_macaddr)[1] = (((pwmi_mac_addr)->mac_addr31to0) >> 8) & 0xff; \ |
| (c_macaddr)[2] = (((pwmi_mac_addr)->mac_addr31to0) >> 16) & 0xff; \ |
| (c_macaddr)[3] = (((pwmi_mac_addr)->mac_addr31to0) >> 24) & 0xff; \ |
| (c_macaddr)[4] = ((pwmi_mac_addr)->mac_addr47to32) & 0xff; \ |
| (c_macaddr)[5] = (((pwmi_mac_addr)->mac_addr47to32) >> 8) & 0xff; \ |
| } while (0) |
| |
| #define TARGET_INIT_STATUS_SUCCESS 0x0 |
| #define TARGET_INIT_STATUS_GEN_FAILED 0x1 |
| #define TARGET_GET_INIT_STATUS_REASON(status) ((status) & 0xffff) |
| #define TARGET_GET_INIT_STATUS_MODULE_ID(status) (((status) >> 16) & 0xffff) |
| |
| #define MAX_ASSOC_IE_LENGTH 1024 |
| typedef uint32_t TARGET_INIT_STATUS; |
| |
| /** |
| * @brief Opaque handle of wmi structure |
| */ |
| struct wmi_unified; |
| typedef struct wmi_unified *wmi_unified_t; |
| |
| typedef void *ol_scn_t; |
| /** |
| * @wmi_event_handler function prototype |
| */ |
| typedef int (*wmi_unified_event_handler)(ol_scn_t scn_handle, |
| uint8_t *event_buf, uint32_t len); |
| |
| typedef enum { |
| WMI_HOST_MODE_11A = 0, /* 11a Mode */ |
| WMI_HOST_MODE_11G = 1, /* 11b/g Mode */ |
| WMI_HOST_MODE_11B = 2, /* 11b Mode */ |
| WMI_HOST_MODE_11GONLY = 3, /* 11g only Mode */ |
| WMI_HOST_MODE_11NA_HT20 = 4, /* 11a HT20 mode */ |
| WMI_HOST_MODE_11NG_HT20 = 5, /* 11g HT20 mode */ |
| WMI_HOST_MODE_11NA_HT40 = 6, /* 11a HT40 mode */ |
| WMI_HOST_MODE_11NG_HT40 = 7, /* 11g HT40 mode */ |
| WMI_HOST_MODE_11AC_VHT20 = 8, |
| WMI_HOST_MODE_11AC_VHT40 = 9, |
| WMI_HOST_MODE_11AC_VHT80 = 10, |
| WMI_HOST_MODE_11AC_VHT20_2G = 11, |
| WMI_HOST_MODE_11AC_VHT40_2G = 12, |
| WMI_HOST_MODE_11AC_VHT80_2G = 13, |
| WMI_HOST_MODE_11AC_VHT80_80 = 14, |
| WMI_HOST_MODE_11AC_VHT160 = 15, |
| WMI_HOST_MODE_11AX_HE20 = 16, |
| WMI_HOST_MODE_11AX_HE40 = 17, |
| WMI_HOST_MODE_11AX_HE80 = 18, |
| WMI_HOST_MODE_11AX_HE80_80 = 19, |
| WMI_HOST_MODE_11AX_HE160 = 20, |
| WMI_HOST_MODE_11AX_HE20_2G = 21, |
| WMI_HOST_MODE_11AX_HE40_2G = 22, |
| WMI_HOST_MODE_11AX_HE80_2G = 23, |
| WMI_HOST_MODE_UNKNOWN = 24, |
| WMI_HOST_MODE_MAX = 24 |
| } WMI_HOST_WLAN_PHY_MODE; |
| |
| typedef enum { |
| WMI_HOST_VDEV_START_OK = 0, |
| WMI_HOST_VDEV_START_CHAN_INVALID, |
| } WMI_HOST_VDEV_START_STATUS; |
| |
| /* |
| * Needs to be removed and use channel_param based |
| * on how it is processed |
| */ |
| typedef struct { |
| /** primary 20 MHz channel frequency in mhz */ |
| uint32_t mhz; |
| /** Center frequency 1 in MHz*/ |
| uint32_t band_center_freq1; |
| /** Center frequency 2 in MHz - valid only for 11acvht 80plus80 mode*/ |
| uint32_t band_center_freq2; |
| /** channel info described below */ |
| uint32_t info; |
| /** contains min power, max power, reg power and reg class id. */ |
| uint32_t reg_info_1; |
| /** contains antennamax */ |
| uint32_t reg_info_2; |
| } wmi_host_channel; |
| |
| /** |
| * enum WMI_HOST_REGDMN_MODE: |
| * @WMI_HOST_REGDMN_MODE_11A: 11a channels |
| * @WMI_HOST_REGDMN_MODE_TURBO: 11a turbo-only channels |
| * @WMI_HOST_REGDMN_MODE_11B: 11b channels |
| * @WMI_HOST_REGDMN_MODE_PUREG: 11g channels (OFDM only) |
| * @WMI_HOST_REGDMN_MODE_11G: historical |
| * @WMI_HOST_REGDMN_MODE_108G: 11g+Turbo channels |
| * @WMI_HOST_REGDMN_MODE_108A: 11a+Turbo channels |
| * @WMI_HOST_REGDMN_MODE_XR: XR channels |
| * @WMI_HOST_REGDMN_MODE_11A_HALF_RATE: 11a half rate channels |
| * @WMI_HOST_REGDMN_MODE_11A_QUARTER_RATE: 11a quarter rate channels |
| * @WMI_HOST_REGDMN_MODE_11NG_HT20: 11ng HT20 channels |
| * @WMI_HOST_REGDMN_MODE_11NA_HT20: 11na HT20 channels |
| * @WMI_HOST_REGDMN_MODE_11NG_HT40PLUS: 11ng HT40+ channels |
| * @WMI_HOST_REGDMN_MODE_11NG_HT40MINUS: 11ng HT40- channels |
| * @WMI_HOST_REGDMN_MODE_11NA_HT40PLUS: 11na HT40+ channels |
| * @WMI_HOST_REGDMN_MODE_11NA_HT40MINUS: 11na HT40- channels |
| * @WMI_HOST_REGDMN_MODE_11AC_VHT20: 5GHz, VHT20 |
| * @WMI_HOST_REGDMN_MODE_11AC_VHT40PLUS: 5GHz, VHT40+ channels |
| * @WMI_HOST_REGDMN_MODE_11AC_VHT40MINUS: 5GHz, VHT40- channels |
| * @WMI_HOST_REGDMN_MODE_11AC_VHT80: 5GHz, VHT80 channels |
| * @WMI_HOST_REGDMN_MODE_11AC_VHT160: 5GHz, VHT160 channels |
| * @WMI_HOST_REGDMN_MODE_11AC_VHT80_80: 5GHz, VHT80+80 channels |
| * @WMI_HOST_REGDMN_MODE_11AXG_HE20: 11ax 2.4GHz, HE20 channels |
| * @WMI_HOST_REGDMN_MODE_11AXA_HE20: 11ax 5GHz, HE20 channels |
| * @WMI_HOST_REGDMN_MODE_11AXG_HE40PLUS: 11ax 2.4GHz, HE40+ channels |
| * @WMI_HOST_REGDMN_MODE_11AXG_HE40MINUS: 11ax 2.4GHz, HE40- channels |
| * @WMI_HOST_REGDMN_MODE_11AXA_HE40PLUS: 11ax 5GHz, HE40+ channels |
| * @WMI_HOST_REGDMN_MODE_11AXA_HE40MINUS: 11ax 5GHz, HE40- channels |
| * @WMI_HOST_REGDMN_MODE_11AXA_HE80: 11ax 5GHz, HE80 channels |
| * @WMI_HOST_REGDMN_MODE_11AXA_HE160: 11ax 5GHz, HE160 channels |
| * @WMI_HOST_REGDMN_MODE_11AXA_HE80_80: 11ax 5GHz, HE80+80 channels |
| */ |
| typedef enum { |
| WMI_HOST_REGDMN_MODE_11A = 0x00000001, |
| WMI_HOST_REGDMN_MODE_TURBO = 0x00000002, |
| WMI_HOST_REGDMN_MODE_11B = 0x00000004, |
| WMI_HOST_REGDMN_MODE_PUREG = 0x00000008, |
| WMI_HOST_REGDMN_MODE_11G = 0x00000008, |
| WMI_HOST_REGDMN_MODE_108G = 0x00000020, |
| WMI_HOST_REGDMN_MODE_108A = 0x00000040, |
| WMI_HOST_REGDMN_MODE_XR = 0x00000100, |
| WMI_HOST_REGDMN_MODE_11A_HALF_RATE = 0x00000200, |
| WMI_HOST_REGDMN_MODE_11A_QUARTER_RATE = 0x00000400, |
| WMI_HOST_REGDMN_MODE_11NG_HT20 = 0x00000800, |
| WMI_HOST_REGDMN_MODE_11NA_HT20 = 0x00001000, |
| WMI_HOST_REGDMN_MODE_11NG_HT40PLUS = 0x00002000, |
| WMI_HOST_REGDMN_MODE_11NG_HT40MINUS = 0x00004000, |
| WMI_HOST_REGDMN_MODE_11NA_HT40PLUS = 0x00008000, |
| WMI_HOST_REGDMN_MODE_11NA_HT40MINUS = 0x00010000, |
| WMI_HOST_REGDMN_MODE_11AC_VHT20 = 0x00020000, |
| WMI_HOST_REGDMN_MODE_11AC_VHT40PLUS = 0x00040000, |
| WMI_HOST_REGDMN_MODE_11AC_VHT40MINUS = 0x00080000, |
| WMI_HOST_REGDMN_MODE_11AC_VHT80 = 0x00100000, |
| WMI_HOST_REGDMN_MODE_11AC_VHT160 = 0x00200000, |
| WMI_HOST_REGDMN_MODE_11AC_VHT80_80 = 0x00400000, |
| WMI_HOST_REGDMN_MODE_11AXG_HE20 = 0x00800000, |
| WMI_HOST_REGDMN_MODE_11AXA_HE20 = 0x01000000, |
| WMI_HOST_REGDMN_MODE_11AXG_HE40PLUS = 0x02000000, |
| WMI_HOST_REGDMN_MODE_11AXG_HE40MINUS = 0x04000000, |
| WMI_HOST_REGDMN_MODE_11AXA_HE40PLUS = 0x08000000, |
| WMI_HOST_REGDMN_MODE_11AXA_HE40MINUS = 0x10000000, |
| WMI_HOST_REGDMN_MODE_11AXA_HE80 = 0x20000000, |
| WMI_HOST_REGDMN_MODE_11AXA_HE160 = 0x40000000, |
| WMI_HOST_REGDMN_MODE_11AXA_HE80_80 = 0x80000000, |
| WMI_HOST_REGDMN_MODE_ALL = 0xffffffff |
| } WMI_HOST_REGDMN_MODE; |
| |
| /** |
| * enum WMI_HOST_WLAN_BAND_CAPABILITY: Band capability (2.4 GHz, 5 GHz). Maps to |
| * WLAN_BAND_CAPABILITY used in firmware header file(s). |
| * @WMI_HOST_WLAN_2G_CAPABILITY: 2.4 GHz capable |
| * @WMI_HOST_WLAN_5G_CAPABILITY: 5 GHz capable |
| */ |
| typedef enum { |
| WMI_HOST_WLAN_2G_CAPABILITY = 0x1, |
| WMI_HOST_WLAN_5G_CAPABILITY = 0x2, |
| } WMI_HOST_WLAN_BAND_CAPABILITY; |
| |
| /** |
| * enum wmi_host_channel_width: Channel operating width. Maps to |
| * wmi_channel_width used in firmware header file(s). |
| * @WMI_HOST_CHAN_WIDTH_20: 20 MHz channel operating width |
| * @WMI_HOST_CHAN_WIDTH_40: 40 MHz channel operating width |
| * @WMI_HOST_CHAN_WIDTH_80: 80 MHz channel operating width |
| * @WMI_HOST_CHAN_WIDTH_160: 160 MHz channel operating width |
| * @WMI_HOST_CHAN_WIDTH_80P80: 80+80 MHz channel operating width |
| * @WMI_HOST_CHAN_WIDTH_5: 5 MHz channel operating width |
| * @WMI_HOST_CHAN_WIDTH_10: 10 MHz channel operating width |
| */ |
| typedef enum { |
| WMI_HOST_CHAN_WIDTH_20 = 0, |
| WMI_HOST_CHAN_WIDTH_40 = 1, |
| WMI_HOST_CHAN_WIDTH_80 = 2, |
| WMI_HOST_CHAN_WIDTH_160 = 3, |
| WMI_HOST_CHAN_WIDTH_80P80 = 4, |
| WMI_HOST_CHAN_WIDTH_5 = 5, |
| WMI_HOST_CHAN_WIDTH_10 = 6, |
| } wmi_host_channel_width; |
| |
| /** |
| * enum wmi_dwelltime_adaptive_mode: dwelltime_mode |
| * @WMI_DWELL_MODE_DEFAULT: Use firmware default mode |
| * @WMI_DWELL_MODE_CONSERVATIVE: Conservative adaptive mode |
| * @WMI_DWELL_MODE_MODERATE: Moderate adaptive mode |
| * @WMI_DWELL_MODE_AGGRESSIVE: Aggressive adaptive mode |
| * @WMI_DWELL_MODE_STATIC: static adaptive mode |
| */ |
| enum wmi_dwelltime_adaptive_mode { |
| WMI_DWELL_MODE_DEFAULT = 0, |
| WMI_DWELL_MODE_CONSERVATIVE = 1, |
| WMI_DWELL_MODE_MODERATE = 2, |
| WMI_DWELL_MODE_AGGRESSIVE = 3, |
| WMI_DWELL_MODE_STATIC = 4 |
| }; |
| |
| #define MAX_NUM_CHAN 128 |
| |
| #define ATH_EXPONENT_TO_VALUE(v) ((1<<v)-1) |
| #define ATH_TXOP_TO_US(v) (v<<5) |
| /* WME stream classes */ |
| #define WMI_HOST_AC_BE 0 /* best effort */ |
| #define WMI_HOST_AC_BK 1 /* background */ |
| #define WMI_HOST_AC_VI 2 /* video */ |
| #define WMI_HOST_AC_VO 3 /* voice */ |
| #define WMI_TID_TO_AC(_tid) (\ |
| (((_tid) == 0) || ((_tid) == 3)) ? WMI_HOST_AC_BE : \ |
| (((_tid) == 1) || ((_tid) == 2)) ? WMI_HOST_AC_BK : \ |
| (((_tid) == 4) || ((_tid) == 5)) ? WMI_HOST_AC_VI : \ |
| WMI_HOST_AC_VO) |
| |
| /** |
| * struct vdev_create_params - vdev create cmd parameter |
| * @if_id: interface id |
| * @type: interface type |
| * @subtype: interface subtype |
| * @nss_2g: NSS for 2G |
| * @nss_5g: NSS for 5G |
| * @pdev_id: pdev id on pdev for this vdev |
| */ |
| struct vdev_create_params { |
| uint8_t if_id; |
| uint32_t type; |
| uint32_t subtype; |
| uint8_t nss_2g; |
| uint8_t nss_5g; |
| uint32_t pdev_id; |
| }; |
| |
| /** |
| * struct vdev_delete_params - vdev delete cmd parameter |
| * @if_id: interface id |
| */ |
| struct vdev_delete_params { |
| uint8_t if_id; |
| }; |
| |
| /** |
| * struct channel_param - Channel paramters with all |
| * info required by target. |
| * @chan_id: channel id |
| * @pwr: channel power |
| * @mhz: channel frequency |
| * @half_rate: is half rate |
| * @quarter_rate: is quarter rate |
| * @dfs_set: is dfs channel |
| * @dfs_set_cfreq2: is secondary freq dfs channel |
| * @is_chan_passive: is this passive channel |
| * @allow_ht: HT allowed in chan |
| * @allow_vht: VHT allowed on chan |
| * @set_agile: is agile mode |
| * @phy_mode: phymode (vht80 or ht40 or ...) |
| * @cfreq1: centre frequency on primary |
| * @cfreq2: centre frequency on secondary |
| * @maxpower: max power for channel |
| * @minpower: min power for channel |
| * @maxreqpower: Max regulatory power |
| * @antennamac: Max antenna |
| * @reg_class_id: Regulatory class id. |
| */ |
| |
| struct channel_param { |
| uint8_t chan_id; |
| uint8_t pwr; |
| uint32_t mhz; |
| uint32_t half_rate:1, |
| quarter_rate:1, |
| dfs_set:1, |
| dfs_set_cfreq2:1, |
| is_chan_passive:1, |
| allow_ht:1, |
| allow_vht:1, |
| set_agile:1; |
| uint32_t phy_mode; |
| uint32_t cfreq1; |
| uint32_t cfreq2; |
| int8_t maxpower; |
| int8_t minpower; |
| int8_t maxregpower; |
| uint8_t antennamax; |
| uint8_t reg_class_id; |
| }; |
| |
| /** |
| * struct vdev_stop_params - vdev stop cmd parameter |
| * @vdev_id: vdev id |
| */ |
| struct vdev_stop_params { |
| uint8_t vdev_id; |
| }; |
| |
| /** |
| * struct vdev_up_params - vdev up cmd parameter |
| * @vdev_id: vdev id |
| * @assoc_id: association id |
| */ |
| struct vdev_up_params { |
| uint8_t vdev_id; |
| uint16_t assoc_id; |
| }; |
| |
| /** |
| * struct vdev_down_params - vdev down cmd parameter |
| * @vdev_id: vdev id |
| */ |
| struct vdev_down_params { |
| uint8_t vdev_id; |
| }; |
| |
| /** |
| * struct mac_ssid - mac ssid structure |
| * @length: |
| * @mac_ssid[WMI_MAC_MAX_SSID_LENGTH]: |
| */ |
| struct mac_ssid { |
| uint8_t length; |
| uint8_t mac_ssid[WMI_MAC_MAX_SSID_LENGTH]; |
| } qdf_packed; |
| |
| /** |
| * enum wmi_bcn_tx_rate_code - beacon tx rate code |
| */ |
| enum wmi_bcn_tx_rate_code { |
| WMI_BCN_TX_RATE_CODE_1_M = 0x43, |
| WMI_BCN_TX_RATE_CODE_2_M = 0x42, |
| WMI_BCN_TX_RATE_CODE_5_5_M = 0x41, |
| WMI_BCN_TX_RATE_CODE_6_M = 0x03, |
| WMI_BCN_TX_RATE_CODE_9_M = 0x07, |
| WMI_BCN_TX_RATE_CODE_11M = 0x40, |
| WMI_BCN_TX_RATE_CODE_12_M = 0x02, |
| WMI_BCN_TX_RATE_CODE_18_M = 0x06, |
| WMI_BCN_TX_RATE_CODE_24_M = 0x01, |
| WMI_BCN_TX_RATE_CODE_36_M = 0x05, |
| WMI_BCN_TX_RATE_CODE_48_M = 0x00, |
| WMI_BCN_TX_RATE_CODE_54_M = 0x04, |
| }; |
| |
| /** |
| * struct vdev_start_params - vdev start cmd parameter |
| * @vdev_id: vdev id |
| * @chan_freq: channel frequency |
| * @chan_mode: channel mode |
| * @band_center_freq1: center freq 1 |
| * @band_center_freq2: center freq 2 |
| * @flags: flags to set like pmf_enabled etc. |
| * @is_dfs: flag to check if dfs enabled |
| * @beacon_intval: beacon interval |
| * @dtim_period: dtim period |
| * @max_txpow: max tx power |
| * @is_restart: flag to check if it is vdev |
| * @ssid: ssid and ssid length info |
| * @preferred_tx_streams: preferred tx streams |
| * @preferred_rx_streams: preferred rx streams |
| * @intr_update: flag to check if need to update |
| * required wma interface params |
| * @intr_ssid: pointer to wma interface ssid |
| * @intr_flags: poiter to wma interface flags |
| * @requestor_id: to update requestor id |
| * @disable_hw_ack: to update disable hw ack flag |
| * @info: to update channel info |
| * @reg_info_1: to update min power, max power, |
| * reg power and reg class id |
| * @reg_info_2: to update antennamax |
| * @cac_duration_ms: cac duration in milliseconds |
| * @regdomain: Regulatory domain |
| * @oper_mode: Operating mode |
| * @dfs_pri_multiplier: DFS primary multiplier |
| * allow pulse if they are within multiple of PRI for the radar type |
| * @dot11_mode: Phy mode (VHT20/VHT80...) |
| * @disable_hw_ack: Disable hw ack if chan is dfs channel for cac |
| * @channel_param: Channel params required by target. |
| * @bcn_tx_rate_code: Beacon tx rate code. |
| * @ldpc_rx_enabled: Enable/Disable LDPC RX for this vdev |
| */ |
| struct vdev_start_params { |
| uint8_t vdev_id; |
| uint32_t chan_freq; |
| uint32_t chan_mode; |
| uint32_t band_center_freq1; |
| uint32_t band_center_freq2; |
| uint32_t flags; |
| bool is_dfs; |
| uint32_t beacon_intval; |
| uint32_t dtim_period; |
| int32_t max_txpow; |
| bool is_restart; |
| bool is_half_rate; |
| bool is_quarter_rate; |
| uint32_t dis_hw_ack; |
| uint32_t flag_dfs; |
| uint8_t hidden_ssid; |
| uint8_t pmf_enabled; |
| struct mac_ssid ssid; |
| uint32_t num_noa_descriptors; |
| uint32_t preferred_rx_streams; |
| uint32_t preferred_tx_streams; |
| uint32_t cac_duration_ms; |
| uint32_t regdomain; |
| uint32_t he_ops; |
| #ifndef CONFIG_MCL |
| uint8_t oper_mode; |
| int32_t dfs_pri_multiplier; |
| uint8_t dot11_mode; |
| uint8_t disable_hw_ack; |
| struct channel_param channel; |
| #endif |
| enum wmi_bcn_tx_rate_code bcn_tx_rate_code; |
| bool ldpc_rx_enabled; |
| }; |
| |
| /** |
| * struct hidden_ssid_vdev_restart_params - |
| * vdev restart cmd parameter |
| * @session_id: session id |
| * @ssid_len: ssid length |
| * @ssid: ssid |
| * @flags: flags |
| * @requestor_id: requestor id |
| * @disable_hw_ack: flag to disable hw ack feature |
| * @mhz: channel frequency |
| * @band_center_freq1: center freq 1 |
| * @band_center_freq2: center freq 2 |
| * @info: channel info |
| * @reg_info_1: contains min power, max power, |
| * reg power and reg class id |
| * @reg_info_2: contains antennamax |
| * @hidden_ssid_restart_in_progress: |
| * flag to check if restart is in progress |
| */ |
| struct hidden_ssid_vdev_restart_params { |
| uint8_t session_id; |
| uint32_t ssid_len; |
| uint32_t ssid[8]; |
| uint32_t flags; |
| uint32_t requestor_id; |
| uint32_t disable_hw_ack; |
| uint32_t mhz; |
| uint32_t band_center_freq1; |
| uint32_t band_center_freq2; |
| uint32_t info; |
| uint32_t reg_info_1; |
| uint32_t reg_info_2; |
| qdf_atomic_t hidden_ssid_restart_in_progress; |
| }; |
| |
| /** |
| * struct vdev_set_params - vdev set cmd parameter |
| * @if_id: vdev id |
| * @param_id: parameter id |
| * @param_value: parameter value |
| */ |
| struct vdev_set_params { |
| uint32_t if_id; |
| uint32_t param_id; |
| uint32_t param_value; |
| }; |
| |
| |
| /** |
| * struct peer_delete_params - peer delete cmd parameter |
| * @vdev_id: vdev id |
| */ |
| struct peer_delete_params { |
| uint8_t vdev_id; |
| }; |
| |
| /** |
| * struct peer_flush_params - peer flush cmd parameter |
| * @peer_tid_bitmap: peer tid bitmap |
| * @vdev_id: vdev id |
| */ |
| struct peer_flush_params { |
| uint32_t peer_tid_bitmap; |
| uint8_t vdev_id; |
| }; |
| |
| /** |
| * struct peer_set_params - peer set cmd parameter |
| * @param_id: parameter id |
| * @param_value: parameter value |
| * @vdev_id: vdev id |
| */ |
| struct peer_set_params { |
| uint32_t param_id; |
| uint32_t param_value; |
| uint32_t vdev_id; |
| }; |
| |
| /** |
| * struct peer_create_params - peer create cmd parameter |
| * @peer_addr: peer mac addr |
| * @peer_type: peer type |
| * @vdev_id: vdev id |
| */ |
| struct peer_create_params { |
| const uint8_t *peer_addr; |
| uint32_t peer_type; |
| uint32_t vdev_id; |
| }; |
| |
| /** |
| * struct peer_remove_params - peer remove cmd parameter |
| * @bssid: bss id |
| * @vdev_id: vdev id |
| * @roam_synch_in_progress: flag to indicate if roaming is in progress |
| */ |
| struct peer_remove_params { |
| uint8_t *bssid; |
| uint8_t vdev_id; |
| bool roam_synch_in_progress; |
| }; |
| |
| /** |
| * Stats ID enums defined in host |
| */ |
| typedef enum { |
| WMI_HOST_REQUEST_PEER_STAT = 0x01, |
| WMI_HOST_REQUEST_AP_STAT = 0x02, |
| WMI_HOST_REQUEST_PDEV_STAT = 0x04, |
| WMI_HOST_REQUEST_VDEV_STAT = 0x08, |
| WMI_HOST_REQUEST_BCNFLT_STAT = 0x10, |
| WMI_HOST_REQUEST_VDEV_RATE_STAT = 0x20, |
| WMI_HOST_REQUEST_INST_STAT = 0x40, |
| WMI_HOST_REQUEST_PEER_EXTD_STAT = 0x80, |
| WMI_HOST_REQUEST_VDEV_EXTD_STAT = 0x100, |
| WMI_HOST_REQUEST_BCN_STAT = 0x800, |
| } wmi_host_stats_id; |
| |
| typedef struct { |
| uint16_t cfg_retry_count; |
| uint16_t retry_count; |
| } wmi_host_inst_rssi_args; |
| |
| /** |
| * struct stats_request_params - stats_request cmd parameter |
| * @stats_id: Bit mask of all the STATS request are specified with values from wmi_host_stats_id |
| * @vdev_id: vdev id |
| * @pdev_id: pdev_id |
| * @wmi_host_inst_rssi_args: Instantaneous rssi stats args |
| */ |
| struct stats_request_params { |
| uint32_t stats_id; |
| uint8_t vdev_id; |
| uint8_t pdev_id; |
| wmi_host_inst_rssi_args rssi_args; |
| }; |
| |
| /** |
| * struct bss_chan_info_request_params - BSS chan info params |
| * @param: parameter value |
| */ |
| struct bss_chan_info_request_params { |
| uint32_t param; |
| }; |
| |
| /** |
| * struct wow_cmd_params - wow cmd parameter |
| * @enable: wow enable or disable flag |
| * @can_suspend_link: flag to indicate if link can be suspended |
| * @pause_iface_config: interface config |
| */ |
| struct wow_cmd_params { |
| bool enable; |
| bool can_suspend_link; |
| uint8_t pause_iface_config; |
| uint32_t flags; |
| }; |
| |
| /** |
| * struct wow_add_wakeup_params - wow wakeup parameter |
| * @type: param type |
| */ |
| struct wow_add_wakeup_params { |
| uint32_t type; |
| }; |
| |
| /** |
| * struct wow_add_wakeup_pattern_params - Add WoW pattern params |
| * @pattern_bytes: pointer to pattern bytes |
| * @mask_bytes: pointer to mask bytes |
| * @pattern_len: pattern length |
| * @pattern_id: pattern id |
| */ |
| struct wow_add_wakeup_pattern_params { |
| uint8_t *pattern_bytes; |
| uint8_t *mask_bytes; |
| uint32_t pattern_len; |
| uint32_t pattern_id; |
| }; |
| |
| /** |
| * struct wow_remove_wakeup_pattern params - WoW remove pattern param |
| * @pattern_bytes: pointer to pattern bytes |
| * @mask_bytes: Mask bytes |
| * @pattern_id: pattern identifier |
| */ |
| struct wow_remove_wakeup_pattern_params { |
| uint32_t *pattern_bytes; |
| uint32_t *mask_bytes; |
| uint32_t pattern_id; |
| }; |
| |
| |
| /** |
| * struct packet_enable_params - packet enable cmd parameter |
| * @vdev_id: vdev id |
| * @enable: flag to indicate if parameter can be enabled or disabled |
| */ |
| struct packet_enable_params { |
| uint8_t vdev_id; |
| bool enable; |
| }; |
| |
| /** |
| * struct suspend_params - suspend cmd parameter |
| * @disable_target_intr: disable target interrupt |
| */ |
| struct suspend_params { |
| uint8_t disable_target_intr; |
| }; |
| |
| /** |
| * struct pdev_params - pdev set cmd parameter |
| * @param_id: parameter id |
| * @param_value: parameter value |
| */ |
| struct pdev_params { |
| uint32_t param_id; |
| uint32_t param_value; |
| }; |
| |
| /** |
| * struct beacon_tmpl_params - beacon template cmd parameter |
| * @vdev_id: vdev id |
| * @tim_ie_offset: tim ie offset |
| * @tmpl_len: beacon template length |
| * @tmpl_len_aligned: beacon template alignment |
| * @csa_switch_count_offset: CSA swith count offset in beacon frame |
| * @ext_csa_switch_count_offset: ECSA switch count offset in beacon frame |
| * @frm: beacon template parameter |
| */ |
| struct beacon_tmpl_params { |
| uint8_t vdev_id; |
| uint32_t tim_ie_offset; |
| uint32_t tmpl_len; |
| uint32_t tmpl_len_aligned; |
| uint32_t csa_switch_count_offset; |
| uint32_t ext_csa_switch_count_offset; |
| uint8_t *frm; |
| }; |
| |
| /** |
| * struct beacon_params - beacon cmd parameter |
| * @vdev_id: vdev id |
| * @beaconInterval: Beacon interval |
| * @wbuf: beacon buffer |
| * @frame_ctrl: frame control field |
| * @bcn_txant: beacon antenna |
| * @is_dtim_count_zero: is it dtim beacon |
| * @is_bitctl_reqd: is Bit control required |
| * @is_high_latency: Is this high latency target |
| */ |
| struct beacon_params { |
| uint8_t vdev_id; |
| uint16_t beaconInterval; |
| qdf_nbuf_t wbuf; |
| uint16_t frame_ctrl; |
| uint32_t bcn_txant; |
| bool is_dtim_count_zero; |
| bool is_bitctl_reqd; |
| bool is_high_latency; |
| }; |
| |
| /** |
| * struct fd_params - FD cmd parameter |
| * @vdev_id: vdev id |
| * @wbuf: FD buffer |
| * @frame_ctrl: frame control field |
| */ |
| struct fd_params { |
| uint8_t vdev_id; |
| qdf_nbuf_t wbuf; |
| uint16_t frame_ctrl; |
| }; |
| |
| /** |
| * struct bcn_prb_template_params - beacon probe template parameter |
| * @vdev_id: vdev id |
| * @buf_len: Template length |
| * @caps: capabilities field |
| * @erp: ERP field |
| */ |
| struct bcn_prb_template_params { |
| uint8_t vdev_id; |
| int buf_len; |
| uint16_t caps; |
| uint8_t erp; |
| }; |
| |
| #define WMI_MAX_SUPPORTED_RATES 128 |
| /** |
| * struct target_rate_set - Rate set bitmap |
| * @num_rate: number of rates in rates bitmap |
| * @rates: rates (each 8bit value) packed into a 32 bit word. |
| * the rates are filled from least significant byte to most |
| * significant byte. |
| */ |
| typedef struct { |
| uint32_t num_rates; |
| uint32_t rates[(WMI_MAX_SUPPORTED_RATES / 4) + 1]; |
| } target_rate_set; |
| |
| |
| #define WMI_HOST_MAX_NUM_SS 8 |
| #define WMI_HOST_MAX_HECAP_PHY_SIZE 3 |
| #define WMI_HOST_MAX_HE_RATE_SET 3 |
| /** |
| * struct wmi_host_ppe_threshold -PPE threshold |
| * @numss_m1: NSS - 1 |
| * @ru_bit_mask: RU bit mask indicating the supported RU's |
| * @ppet16_ppet8_ru3_ru0: ppet8 and ppet16 for max num ss |
| */ |
| struct wmi_host_ppe_threshold { |
| uint32_t numss_m1; |
| uint32_t ru_bit_mask; |
| uint32_t ppet16_ppet8_ru3_ru0[WMI_HOST_MAX_NUM_SS]; |
| }; |
| |
| /** |
| * struct wmi_host_mac_addr - host mac addr 2 word representation of MAC addr |
| * @mac_addr31to0: upper 4 bytes of MAC address |
| * @mac_addr47to32: lower 2 bytes of MAC address |
| */ |
| typedef struct { |
| uint32_t mac_addr31to0; |
| uint32_t mac_addr47to32; |
| } wmi_host_mac_addr; |
| |
| /** |
| * struct peer_assoc_params - peer assoc cmd parameter |
| * @peer_macaddr: peer mac address |
| * @vdev_id: vdev id |
| * @peer_new_assoc: peer association type |
| * @peer_associd: peer association id |
| * @peer_flags: peer flags |
| * @peer_caps: peer capabalities |
| * @peer_listen_intval: peer listen interval |
| * @peer_ht_caps: HT capabalities |
| * @peer_max_mpdu: 0 : 8k , 1 : 16k, 2 : 32k, 3 : 64k |
| * @peer_mpdu_density: 3 : 0~7 : 2^(11nAMPDUdensity -4) |
| * @peer_rate_caps: peer rate capabalities |
| * @peer_nss: peer nss |
| * @peer_phymode: peer phymode |
| * @peer_ht_info: peer HT info |
| * @peer_legacy_rates: peer legacy rates |
| * @peer_ht_rates: peer ht rates |
| * @rx_max_rate: max rx rates |
| * @rx_mcs_set: rx mcs |
| * @tx_max_rate: max tx rates |
| * @tx_mcs_set: tx mcs |
| * @vht_capable: VHT capabalities |
| * @tx_max_mcs_nss: max tx MCS and NSS |
| * @peer_bw_rxnss_override: Peer BW RX NSS overriden or not. |
| * @is_pmf_enabled: PMF enabled |
| * @is_wme_set: WME enabled |
| * @qos_flag: QoS Flags |
| * @apsd_flag: APSD flags |
| * @ht_flag: HT flags |
| * @bw_40: 40 capabale |
| * @bw_80: 80 capabale |
| * @bw_160: 160 capabale |
| * @stbc_flag: STBC flag |
| * @ldpc_flag: LDPC flag |
| * @static_mimops_flag: statis MIMO PS flags |
| * @dynamic_mimops_flag: Dynamic MIMO PS flags |
| * @spatial_mux_flag: spatial MUX flags |
| * @vht_flag: VHT flags |
| * @vht_ng_flag: VHT on 11N/G flags |
| * @need_ptk_4_way: Needs 4 way handshake |
| * @need_gtk_2_way: Needs 2 way GTK |
| * @auth_flag: Is peer authenticated |
| * @safe_mode_enabled: Safe enabled for this peer |
| * @amsdu_disable: AMSDU disble |
| * @peer_mac: Peer mac address |
| * @he_flag: HE flags |
| * @peer_he_cap_macinfo: Peer HE Cap MAC info |
| * @peer_he_ops: Peer HE operation info |
| * @peer_he_cap_phyinfo: Peer HE Cap PHY info |
| * @peer_he_mcs_count: Peer HE MCS TX/RX MAP count |
| * @peer_he_rx_mcs_set: Peer HE RX MCS MAP |
| * @peer_he_tx_mcs_set: Peer HE TX MCS MAP |
| * @peer_ppet: Peer HE PPET info |
| */ |
| struct peer_assoc_params { |
| wmi_host_mac_addr peer_macaddr; |
| uint32_t vdev_id; |
| uint32_t peer_new_assoc; |
| uint32_t peer_associd; |
| uint32_t peer_flags; |
| uint32_t peer_caps; |
| uint32_t peer_listen_intval; |
| uint32_t peer_ht_caps; |
| uint32_t peer_max_mpdu; |
| uint32_t peer_mpdu_density; |
| uint32_t peer_rate_caps; |
| uint32_t peer_nss; |
| uint32_t peer_vht_caps; |
| uint32_t peer_phymode; |
| uint32_t peer_ht_info[2]; |
| target_rate_set peer_legacy_rates; |
| target_rate_set peer_ht_rates; |
| uint32_t rx_max_rate; |
| uint32_t rx_mcs_set; |
| uint32_t tx_max_rate; |
| uint32_t tx_mcs_set; |
| uint8_t vht_capable; |
| uint32_t peer_bw_rxnss_override; |
| #ifndef CONFIG_MCL |
| uint32_t tx_max_mcs_nss; |
| bool is_pmf_enabled; |
| bool is_wme_set; |
| bool qos_flag; |
| bool apsd_flag; |
| bool ht_flag; |
| bool bw_40; |
| bool bw_80; |
| bool bw_160; |
| bool stbc_flag; |
| bool ldpc_flag; |
| bool static_mimops_flag; |
| bool dynamic_mimops_flag; |
| bool spatial_mux_flag; |
| bool vht_flag; |
| bool vht_ng_flag; |
| bool need_ptk_4_way; |
| bool need_gtk_2_way; |
| bool auth_flag; |
| bool safe_mode_enabled; |
| bool amsdu_disable; |
| /* Use common structure */ |
| uint8_t peer_mac[IEEE80211_ADDR_LEN]; |
| #endif |
| bool he_flag; |
| uint32_t peer_he_cap_macinfo; |
| uint32_t peer_he_ops; |
| uint32_t peer_he_cap_phyinfo[WMI_HOST_MAX_HECAP_PHY_SIZE]; |
| uint32_t peer_he_mcs_count; |
| uint32_t peer_he_rx_mcs_set[WMI_HOST_MAX_HE_RATE_SET]; |
| uint32_t peer_he_tx_mcs_set[WMI_HOST_MAX_HE_RATE_SET]; |
| struct wmi_host_ppe_threshold peer_ppet; |
| }; |
| |
| /** |
| * struct sta_ps_params - sta ps cmd parameter |
| * @vdev_id: vdev id |
| * @param: sta ps paramter |
| * @value: sta ps parameter value |
| */ |
| struct sta_ps_params { |
| uint32_t vdev_id; |
| uint32_t param; |
| uint32_t value; |
| }; |
| |
| /** |
| * struct ap_ps_params - ap ps cmd parameter |
| * @vdev_id: vdev id |
| * @param: ap ps paramter |
| * @value: ap ps paramter value |
| */ |
| struct ap_ps_params { |
| uint32_t vdev_id; |
| uint32_t param; |
| uint32_t value; |
| }; |
| |
| #define WMI_HOST_SCAN_CHAN_FREQ_SHIFT 0 |
| #define WMI_HOST_SCAN_CHAN_FREQ_MASK 0xffff |
| #define WMI_HOST_SCAN_CHAN_MODE_SHIFT 16 |
| #define WMI_HOST_SCAN_CHAN_MODE_MASK 0xff |
| |
| #define WMI_HOST_MAX_CHANS_PER_WMI_CMD 58 |
| |
| /** |
| * struct scan_chan_list_params - scan channel list cmd parameter |
| * @num_scan_chans: no of scan channels |
| * @chan_info: pointer to wmi channel info |
| */ |
| #ifdef CONFIG_MCL |
| /* TODO: This needs clean-up based on how its processed. */ |
| typedef struct { |
| /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_channel */ |
| uint32_t tlv_header; |
| /** primary 20 MHz channel frequency in mhz */ |
| uint32_t mhz; |
| /** Center frequency 1 in MHz*/ |
| uint32_t band_center_freq1; |
| /** Center frequency 2 in MHz - valid only for 11acvht 80plus80 mode*/ |
| uint32_t band_center_freq2; |
| /** channel info described below */ |
| uint32_t info; |
| /** contains min power, max power, reg power and reg class id. */ |
| uint32_t reg_info_1; |
| /** contains antennamax */ |
| uint32_t reg_info_2; |
| } wmi_channel_param; |
| |
| struct scan_chan_list_params { |
| uint32_t pdev_id; |
| uint8_t num_scan_chans; |
| wmi_channel_param *chan_info; |
| }; |
| #else |
| /** |
| * struct scan_chan_list_params - scan channel list cmd parameter |
| * @pdev_id: pdev_id |
| * @num_chan: no of scan channels |
| * @nallchans: nall chans |
| * @append: append to existing chan list |
| * @ch_param: pointer to channel_paramw |
| */ |
| struct scan_chan_list_params { |
| uint32_t pdev_id; |
| uint16_t nallchans; |
| bool append; |
| struct channel_param ch_param[1]; |
| }; |
| #endif |
| |
| /** |
| * struct multiple_vdev_restart_params - Multiple vdev restart cmd parameter |
| * @pdev_id: Pdev identifier |
| * @requestor_id: Unique id identifying the module |
| * @disable_hw_ack: Flag to indicate disabling HW ACK during CAC |
| * @cac_duration_ms: CAC duration on the given channel |
| * @num_vdevs: No. of vdevs that need to be restarted |
| * @ch_param: Pointer to channel_param |
| * @vdev_ids: Pointer to array of vdev_ids |
| */ |
| struct multiple_vdev_restart_params { |
| uint32_t pdev_id; |
| uint32_t requestor_id; |
| uint32_t disable_hw_ack; |
| uint32_t cac_duration_ms; |
| uint32_t num_vdevs; |
| struct channel_param ch_param; |
| uint32_t vdev_ids[WMI_HOST_PDEV_MAX_VDEVS]; |
| }; |
| /** |
| * struct fw_hang_params - fw hang command parameters |
| * @type: 0:unused 1: ASSERT, 2:not respond detect command, 3:simulate ep-full |
| * @delay_time_ms: 0xffffffff means the simulate will delay for random time (0 ~0xffffffff ms) |
| */ |
| struct fw_hang_params { |
| uint32_t type; |
| uint32_t delay_time_ms; |
| }; |
| |
| /** |
| * struct pdev_utf_params - pdev utf command parameters |
| * @utf_payload: |
| * @len: |
| * @is_ar900b: is it 900b target |
| */ |
| struct pdev_utf_params { |
| uint8_t *utf_payload; |
| uint32_t len; |
| #ifndef CONFIG_MCL |
| bool is_ar900b; |
| #endif |
| }; |
| |
| /*Adding this due to dependency on wmi_unified.h |
| */ |
| typedef struct { |
| uint32_t len; |
| uint32_t msgref; |
| uint32_t segmentInfo; |
| } QVIT_SEG_HDR_INFO_STRUCT; |
| |
| struct pdev_qvit_params { |
| uint8_t *utf_payload; |
| uint32_t len; |
| }; |
| /** |
| * struct crash_inject - crash inject command parameters |
| * @type: crash inject type |
| * @delay_time_ms: time in milliseconds for FW to delay the crash |
| */ |
| struct crash_inject { |
| uint32_t type; |
| uint32_t delay_time_ms; |
| }; |
| |
| /** |
| * struct dbglog_params - fw deboglog command parameters |
| * @param: command parameter |
| * @val: parameter value |
| * @module_id_bitmap: fixed length module id bitmap |
| * @bitmap_len: module id bitmap length |
| * @cfgvalid: cfgvalid |
| */ |
| struct dbglog_params { |
| uint32_t param; |
| uint32_t val; |
| uint32_t *module_id_bitmap; |
| uint32_t bitmap_len; |
| #ifndef CONFIG_MCL |
| uint32_t cfgvalid[2]; |
| #endif |
| }; |
| |
| /** |
| * struct seg_hdr_info - header info |
| * @len: length |
| * @msgref: message refrence |
| * @segmentInfo: segment info |
| * @pad: padding |
| */ |
| struct seg_hdr_info { |
| uint32_t len; |
| uint32_t msgref; |
| uint32_t segmentInfo; |
| uint32_t pad; |
| }; |
| |
| /** |
| * struct tx_send_params - TX parameters |
| * @pwr: Tx frame transmission power |
| * @mcs_mask: Modulation and coding index mask for transmission |
| * bit 0 -> CCK 1 Mbps rate is allowed |
| * bit 1 -> CCK 2 Mbps rate is allowed |
| * bit 2 -> CCK 5.5 Mbps rate is allowed |
| * bit 3 -> CCK 11 Mbps rate is allowed |
| * bit 4 -> OFDM BPSK modulation, 1/2 coding rate is allowed |
| * bit 5 -> OFDM BPSK modulation, 3/4 coding rate is allowed |
| * bit 6 -> OFDM QPSK modulation, 1/2 coding rate is allowed |
| * bit 7 -> OFDM QPSK modulation, 3/4 coding rate is allowed |
| * bit 8 -> OFDM 16-QAM modulation, 1/2 coding rate is allowed |
| * bit 9 -> OFDM 16-QAM modulation, 3/4 coding rate is allowed |
| * bit 10 -> OFDM 64-QAM modulation, 2/3 coding rate is allowed |
| * bit 11 -> OFDM 64-QAM modulation, 3/4 coding rate is allowed |
| * @nss_mask: Spatial streams permitted |
| * bit 0: if set, Nss = 1 (non-MIMO) is permitted |
| * bit 1: if set, Nss = 2 (2x2 MIMO) is permitted |
| * bit 2: if set, Nss = 3 (3x3 MIMO) is permitted |
| * bit 3: if set, Nss = 4 (4x4 MIMO) is permitted |
| * bit 4: if set, Nss = 5 (5x5 MIMO) is permitted |
| * bit 5: if set, Nss = 6 (6x6 MIMO) is permitted |
| * bit 6: if set, Nss = 7 (7x7 MIMO) is permitted |
| * bit 7: if set, Nss = 8 (8x8 MIMO) is permitted |
| * If no bits are set, target will choose what NSS type to use |
| * @retry_limit: Maximum number of retries before ACK |
| * @chain_mask: Chains to be used for transmission |
| * @bw_mask: Bandwidth to be used for transmission |
| * bit 0 -> 5MHz |
| * bit 1 -> 10MHz |
| * bit 2 -> 20MHz |
| * bit 3 -> 40MHz |
| * bit 4 -> 80MHz |
| * bit 5 -> 160MHz |
| * bit 6 -> 80_80MHz |
| * @preamble_type: Preamble types for transmission |
| * bit 0: if set, OFDM |
| * bit 1: if set, CCK |
| * bit 2: if set, HT |
| * bit 3: if set, VHT |
| * bit 4: if set, HE |
| * @frame_type: Data or Management frame |
| * Data:1 Mgmt:0 |
| */ |
| struct tx_send_params { |
| uint32_t pwr:8, |
| mcs_mask:12, |
| nss_mask:8, |
| retry_limit:4; |
| uint32_t chain_mask:8, |
| bw_mask:7, |
| preamble_type:5, |
| frame_type:1, |
| reserved:11; |
| }; |
| |
| /** |
| * struct wmi_mgmt_params - wmi mgmt cmd paramters |
| * @tx_frame: management tx frame |
| * @frm_len: frame length |
| * @vdev_id: vdev id |
| * @chanfreq: channel frequency |
| * @pdata: frame data |
| * @desc_id: descriptor id relyaed back by target |
| * @macaddr: macaddr of peer |
| * @qdf_ctx: qdf context for qdf_nbuf_map |
| * @tx_param: TX send parameters |
| * @tx_params_valid: Flag that indicates if TX params are valid |
| * @use_6mbps: specify whether management frame to transmit should |
| * use 6 Mbps rather than 1 Mbps min rate(for 5GHz band or P2P) |
| * @tx_type: type of managment frame (determines what callback to use) |
| */ |
| struct wmi_mgmt_params { |
| void *tx_frame; |
| uint16_t frm_len; |
| uint8_t vdev_id; |
| uint16_t chanfreq; |
| void *pdata; |
| uint16_t desc_id; |
| uint8_t *macaddr; |
| void *qdf_ctx; |
| struct tx_send_params tx_param; |
| bool tx_params_valid; |
| uint8_t use_6mbps; |
| uint8_t tx_type; |
| }; |
| |
| /** |
| * struct wmi_offchan_data_tx_params - wmi offchan data tx cmd paramters |
| * @tx_frame: management tx frame |
| * @frm_len: frame length |
| * @vdev_id: vdev id |
| * @chanfreq: channel frequency |
| * @pdata: frame data |
| * @desc_id: descriptor id relyaed back by target |
| * @macaddr: macaddr of peer |
| * @qdf_ctx: qdf context for qdf_nbuf_map |
| * @tx_param: TX send parameters |
| * @tx_params_valid: Flag that indicates if TX params are valid |
| */ |
| struct wmi_offchan_data_tx_params { |
| void *tx_frame; |
| uint16_t frm_len; |
| uint8_t vdev_id; |
| uint16_t chanfreq; |
| void *pdata; |
| uint16_t desc_id; |
| uint8_t *macaddr; |
| void *qdf_ctx; |
| struct tx_send_params tx_param; |
| bool tx_params_valid; |
| }; |
| |
| /** |
| * struct p2p_ps_params - P2P powersave related params |
| * @opp_ps: opportunistic power save |
| * @ctwindow: CT window |
| * @count: count |
| * @duration: duration |
| * @interval: interval |
| * @single_noa_duration: single shot noa duration |
| * @ps_selection: power save selection |
| * @session_id: session id |
| */ |
| struct p2p_ps_params { |
| uint8_t opp_ps; |
| uint32_t ctwindow; |
| uint8_t count; |
| uint32_t duration; |
| uint32_t interval; |
| uint32_t single_noa_duration; |
| uint8_t ps_selection; |
| uint8_t session_id; |
| }; |
| |
| #ifndef CONVERGED_TDLS_ENABLE |
| /** |
| * struct sta_uapsd_params - uapsd auto trig params |
| * @wmm_ac: WMM access category from 0 to 3 |
| * @user_priority: User priority to use in trigger frames |
| * @service_interval: service interval |
| * @suspend_interval: suspend interval |
| * @delay_interval: delay interval |
| */ |
| struct sta_uapsd_params { |
| uint32_t wmm_ac; |
| uint32_t user_priority; |
| uint32_t service_interval; |
| uint32_t suspend_interval; |
| uint32_t delay_interval; |
| }; |
| |
| /** |
| * struct ta_uapsd_trig_params - uapsd trigger parameter |
| * @vdevid: vdev id |
| * @peer_addr: peer address |
| * @auto_triggerparam: trigger parameters |
| * @num_ac: no of access category |
| */ |
| struct sta_uapsd_trig_params { |
| uint32_t vdevid; |
| uint8_t peer_addr[IEEE80211_ADDR_LEN]; |
| struct sta_uapsd_params *auto_triggerparam; |
| uint32_t num_ac; |
| }; |
| #endif |
| |
| /** |
| * struct ocb_utc_param |
| * @vdev_id: session id |
| * @utc_time: number of nanoseconds from Jan 1st 1958 |
| * @time_error: the error in the UTC time. All 1's for unknown |
| */ |
| struct ocb_utc_param { |
| uint32_t vdev_id; |
| uint8_t utc_time[WMI_SIZE_UTC_TIME]; |
| uint8_t time_error[WMI_SIZE_UTC_TIME_ERROR]; |
| }; |
| |
| /** |
| * struct ocb_timing_advert_param |
| * @vdev_id: session id |
| * @chan_freq: frequency on which to advertise |
| * @repeat_rate: the number of times it will send TA in 5 seconds |
| * @timestamp_offset: offset of the timestamp field in the TA frame |
| * @time_value_offset: offset of the time_value field in the TA frame |
| * @template_length: size in bytes of the TA frame |
| * @template_value: the TA frame |
| */ |
| struct ocb_timing_advert_param { |
| uint32_t vdev_id; |
| uint32_t chan_freq; |
| uint32_t repeat_rate; |
| uint32_t timestamp_offset; |
| uint32_t time_value_offset; |
| uint32_t template_length; |
| uint8_t *template_value; |
| }; |
| |
| /** |
| * struct dcc_get_stats_param |
| * @vdev_id: session id |
| * @channel_count: number of dcc channels |
| * @request_array_len: size in bytes of the request array |
| * @request_array: the request array |
| */ |
| struct dcc_get_stats_param { |
| uint32_t vdev_id; |
| uint32_t channel_count; |
| uint32_t request_array_len; |
| void *request_array; |
| }; |
| |
| /** |
| * struct dcc_update_ndl_param |
| * @vdev_id: session id |
| * @channel_count: number of channels to be updated |
| * @dcc_ndl_chan_list_len: size in bytes of the ndl_chan array |
| * @dcc_ndl_chan_list: the ndl_chan array |
| * @dcc_ndl_active_state_list_len: size in bytes of the active_state array |
| * @dcc_ndl_active_state_list: the active state array |
| */ |
| struct dcc_update_ndl_param { |
| uint32_t vdev_id; |
| uint32_t channel_count; |
| uint32_t dcc_ndl_chan_list_len; |
| void *dcc_ndl_chan_list; |
| uint32_t dcc_ndl_active_state_list_len; |
| void *dcc_ndl_active_state_list; |
| }; |
| |
| /** |
| * struct ocb_config_sched |
| * @chan_freq: frequency of the channel |
| * @total_duration: duration of the schedule |
| * @guard_interval: guard interval on the start of the schedule |
| */ |
| struct ocb_config_sched { |
| uint32_t chan_freq; |
| uint32_t total_duration; |
| uint32_t guard_interval; |
| }; |
| |
| /** |
| * OCB structures |
| */ |
| |
| #define WMI_NUM_AC (4) |
| #define WMI_OCB_CHANNEL_MAX (5) |
| #define WMI_MAX_NUM_AC 4 |
| struct wmi_ocb_qos_params { |
| uint8_t aifsn; |
| uint8_t cwmin; |
| uint8_t cwmax; |
| }; |
| /** |
| * struct ocb_config_channel |
| * @chan_freq: frequency of the channel |
| * @bandwidth: bandwidth of the channel, either 10 or 20 MHz |
| * @mac_address: MAC address assigned to this channel |
| * @qos_params: QoS parameters |
| * @max_pwr: maximum transmit power of the channel (dBm) |
| * @min_pwr: minimum transmit power of the channel (dBm) |
| * @reg_pwr: maximum transmit power specified by the regulatory domain (dBm) |
| * @antenna_max: maximum antenna gain specified by the regulatory domain (dB) |
| */ |
| struct ocb_config_channel { |
| uint32_t chan_freq; |
| uint32_t bandwidth; |
| struct qdf_mac_addr mac_address; |
| struct wmi_ocb_qos_params qos_params[WMI_MAX_NUM_AC]; |
| uint32_t max_pwr; |
| uint32_t min_pwr; |
| uint8_t reg_pwr; |
| uint8_t antenna_max; |
| uint16_t flags; |
| }; |
| |
| /** |
| * struct ocb_config_param |
| * @session_id: session id |
| * @channel_count: number of channels |
| * @schedule_size: size of the channel schedule |
| * @flags: reserved |
| * @channels: array of OCB channels |
| * @schedule: array of OCB schedule elements |
| * @dcc_ndl_chan_list_len: size of the ndl_chan array |
| * @dcc_ndl_chan_list: array of dcc channel info |
| * @dcc_ndl_active_state_list_len: size of the active state array |
| * @dcc_ndl_active_state_list: array of active states |
| * @adapter: the OCB adapter |
| * @dcc_stats_callback: callback for the response event |
| */ |
| struct ocb_config_param { |
| uint8_t session_id; |
| uint32_t channel_count; |
| uint32_t schedule_size; |
| uint32_t flags; |
| struct ocb_config_channel *channels; |
| struct ocb_config_sched *schedule; |
| uint32_t dcc_ndl_chan_list_len; |
| void *dcc_ndl_chan_list; |
| uint32_t dcc_ndl_active_state_list_len; |
| void *dcc_ndl_active_state_list; |
| }; |
| |
| enum wmi_peer_rate_report_cond_phy_type { |
| WMI_PEER_RATE_REPORT_COND_11B = 0, |
| WMI_PEER_RATE_REPORT_COND_11A_G, |
| WMI_PEER_RATE_REPORT_COND_11N, |
| WMI_PEER_RATE_REPORT_COND_11AC, |
| WMI_PEER_RATE_REPORT_COND_MAX_NUM |
| }; |
| |
| /** |
| * struct report_rate_delta - peer specific parameters |
| * @percent: percentage |
| * @delta_min: rate min delta |
| */ |
| struct report_rate_delta { |
| uint32_t percent; /* in unit of 12.5% */ |
| uint32_t delta_min; /* in unit of Mbps */ |
| }; |
| |
| /** |
| * struct report_rate_per_phy - per phy report parameters |
| * @cond_flags: condition flag val |
| * @delta: rate delta |
| * @report_rate_threshold: rate threshold |
| */ |
| struct report_rate_per_phy { |
| /* |
| * PEER_RATE_REPORT_COND_FLAG_DELTA, |
| * PEER_RATE_REPORT_COND_FLAG_THRESHOLD |
| * Any of these two conditions or both of |
| * them can be set. |
| */ |
| uint32_t cond_flags; |
| struct report_rate_delta delta; |
| /* |
| * In unit of Mbps. There are at most 4 thresholds |
| * If the threshold count is less than 4, set zero to |
| * the one following the last threshold |
| */ |
| uint32_t report_rate_threshold[WMI_MAX_NUM_OF_RATE_THRESH]; |
| }; |
| |
| /** |
| * struct peer_rate_report_params - peer rate report parameters |
| * @rate_report_enable: enable rate report param |
| * @backoff_time: backoff time |
| * @timer_period: timer |
| * @report_per_phy: report per phy type |
| */ |
| struct wmi_peer_rate_report_params { |
| uint32_t rate_report_enable; |
| uint32_t backoff_time; /* in unit of msecond */ |
| uint32_t timer_period; /* in unit of msecond */ |
| /* |
| *In the following field, the array index means the phy type, |
| * please see enum wmi_peer_rate_report_cond_phy_type for detail |
| */ |
| struct report_rate_per_phy report_per_phy[ |
| WMI_PEER_RATE_REPORT_COND_MAX_NUM]; |
| |
| }; |
| |
| /** |
| * struct t_thermal_cmd_params - thermal command parameters |
| * @min_temp: minimum temprature |
| * @max_temp: maximum temprature |
| * @thermal_enable: thermal enable |
| */ |
| struct thermal_cmd_params { |
| uint16_t min_temp; |
| uint16_t max_temp; |
| uint8_t thermal_enable; |
| }; |
| |
| #define WMI_LRO_IPV4_SEED_ARR_SZ 5 |
| #define WMI_LRO_IPV6_SEED_ARR_SZ 11 |
| |
| /** |
| * struct wmi_lro_config_cmd_t - set LRO init parameters |
| * @lro_enable: indicates whether lro is enabled |
| * @tcp_flag: If the TCP flags from the packet do not match |
| * the values in this field after masking with TCP flags mask |
| * below, packet is not LRO eligible |
| * @tcp_flag_mask: field for comparing the TCP values provided |
| * above with the TCP flags field in the received packet |
| * @toeplitz_hash_ipv4: contains seed needed to compute the flow id |
| * 5-tuple toeplitz hash for ipv4 packets |
| * @toeplitz_hash_ipv6: contains seed needed to compute the flow id |
| * 5-tuple toeplitz hash for ipv6 packets |
| */ |
| struct wmi_lro_config_cmd_t { |
| uint32_t lro_enable; |
| uint32_t tcp_flag:9, |
| tcp_flag_mask:9; |
| uint32_t toeplitz_hash_ipv4[WMI_LRO_IPV4_SEED_ARR_SZ]; |
| uint32_t toeplitz_hash_ipv6[WMI_LRO_IPV6_SEED_ARR_SZ]; |
| }; |
| |
| /** |
| * struct gtx_config_t - GTX config |
| * @gtx_rt_mask: for HT and VHT rate masks |
| * @gtx_usrcfg: host request for GTX mask |
| * @gtx_threshold: PER Threshold (default: 10%) |
| * @gtx_margin: PER margin (default: 2%) |
| * @gtx_tcpstep: TCP step (default: 1) |
| * @gtx_tpcMin: TCP min (default: 5) |
| * @gtx_bwmask: BW mask (20/40/80/160 Mhz) |
| */ |
| struct wmi_gtx_config { |
| uint32_t gtx_rt_mask[2]; |
| uint32_t gtx_usrcfg; |
| uint32_t gtx_threshold; |
| uint32_t gtx_margin; |
| uint32_t gtx_tpcstep; |
| uint32_t gtx_tpcmin; |
| uint32_t gtx_bwmask; |
| }; |
| |
| /** |
| * struct wmi_probe_resp_params - send probe response parameters |
| * @prb_rsp_template_frm: pointer to template probe response template |
| * @prb_rsp_template_len: length of probe response template |
| */ |
| struct wmi_probe_resp_params { |
| uint8_t *prb_rsp_template_frm; |
| uint32_t prb_rsp_template_len; |
| }; |
| |
| /* struct set_key_params: structure containing |
| * installation key parameters |
| * @vdev_id: vdev id |
| * @key_len: key length |
| * @key_idx: key index |
| * @peer_mac: peer mac address |
| * @key_flags: key flags, 0:pairwise key, 1:group key, 2:static key |
| * @key_cipher: key cipher based on security mode |
| * @key_txmic_len: tx mic length |
| * @key_rxmic_len: rx mic length |
| * @key_tsc_counter: key tx sc counter |
| * @key_rsc_counter: key rx sc counter |
| * @rx_iv: receive IV, applicable only in case of WAPI |
| * @tx_iv: transmit IV, applicable only in case of WAPI |
| * @key_data: key data |
| */ |
| struct set_key_params { |
| uint8_t vdev_id; |
| uint16_t key_len; |
| uint32_t key_idx; |
| uint8_t peer_mac[IEEE80211_ADDR_LEN]; |
| uint32_t key_flags; |
| uint32_t key_cipher; |
| uint32_t key_txmic_len; |
| uint32_t key_rxmic_len; |
| uint64_t key_tsc_counter; |
| uint64_t *key_rsc_counter; |
| #if defined(ATH_SUPPORT_WAPI) || defined(FEATURE_WLAN_WAPI) |
| uint8_t rx_iv[16]; |
| uint8_t tx_iv[16]; |
| #endif |
| uint8_t key_data[WMI_MAC_MAX_KEY_LENGTH]; |
| }; |
| |
| /** |
| * struct sta_params - sta keep alive parameters |
| * @vdev_id: vdev id |
| * @method: keep alive method |
| * @timeperiod: time to keep alive |
| * @hostv4addr: host ipv4 address |
| * @destv4addr: destination ipv4 address |
| * @destmac: destination mac address |
| */ |
| struct sta_params { |
| uint8_t vdev_id; |
| uint32_t method; |
| uint32_t timeperiod; |
| uint8_t *hostv4addr; |
| uint8_t *destv4addr; |
| uint8_t *destmac; |
| }; |
| |
| /** |
| * struct gateway_update_req_param - gateway parameter update request |
| * @request_id: request id |
| * @session_id: session id |
| * @max_retries: Max ARP/NS retry attempts |
| * @timeout: Retry interval |
| * @ipv4_addr_type: on ipv4 network |
| * @ipv6_addr_type: on ipv6 network |
| * @gw_mac_addr: gateway mac addr |
| * @ipv4_addr: ipv4 addr |
| * @ipv6_addr: ipv6 addr |
| */ |
| struct gateway_update_req_param { |
| uint32_t request_id; |
| uint32_t session_id; |
| uint32_t max_retries; |
| uint32_t timeout; |
| uint32_t ipv4_addr_type; |
| uint32_t ipv6_addr_type; |
| struct qdf_mac_addr gw_mac_addr; |
| uint8_t ipv4_addr[QDF_IPV4_ADDR_SIZE]; |
| uint8_t ipv6_addr[QDF_IPV6_ADDR_SIZE]; |
| }; |
| |
| /** |
| * struct rssi_monitor_param - rssi monitoring |
| * @request_id: request id |
| * @session_id: session id |
| * @min_rssi: minimum rssi |
| * @max_rssi: maximum rssi |
| * @control: flag to indicate start or stop |
| */ |
| struct rssi_monitor_param { |
| uint32_t request_id; |
| uint32_t session_id; |
| int8_t min_rssi; |
| int8_t max_rssi; |
| bool control; |
| }; |
| |
| /** |
| * struct scan_mac_oui - oui paramters |
| * @oui: oui parameters |
| * @vdev_id: interface id |
| * @enb_probe_req_sno_randomization: control probe req sequence no randomization |
| * @ie_whitelist: probe req IE whitelist attrs |
| */ |
| struct scan_mac_oui { |
| uint8_t oui[WMI_WIFI_SCANNING_MAC_OUI_LENGTH]; |
| uint32_t vdev_id; |
| bool enb_probe_req_sno_randomization; |
| struct probe_req_whitelist_attr ie_whitelist; |
| }; |
| |
| #define WMI_PASSPOINT_REALM_LEN 256 |
| #define WMI_PASSPOINT_ROAMING_CONSORTIUM_ID_NUM 16 |
| #define WMI_PASSPOINT_PLMN_LEN 3 |
| /** |
| * struct wifi_passpoint_network_param - passpoint network block |
| * @id: identifier of this network block |
| * @realm: null terminated UTF8 encoded realm, 0 if unspecified |
| * @roaming_consortium_ids: roaming consortium ids to match, 0s if unspecified |
| * @plmn: mcc/mnc combination as per rules, 0s if unspecified |
| */ |
| struct wifi_passpoint_network_param { |
| uint32_t id; |
| uint8_t realm[WMI_PASSPOINT_REALM_LEN]; |
| int64_t roaming_consortium_ids[WMI_PASSPOINT_ROAMING_CONSORTIUM_ID_NUM]; |
| uint8_t plmn[WMI_PASSPOINT_PLMN_LEN]; |
| }; |
| |
| /** |
| * struct wifi_passpoint_req_param - passpoint request |
| * @request_id: request identifier |
| * @num_networks: number of networks |
| * @networks: passpoint networks |
| */ |
| struct wifi_passpoint_req_param { |
| uint32_t request_id; |
| uint32_t session_id; |
| uint32_t num_networks; |
| struct wifi_passpoint_network_param networks[]; |
| }; |
| |
| /* struct mobility_domain_info - structure containing |
| * mobility domain info |
| * @mdie_present: mobility domain present or not |
| * @mobility_domain: mobility domain |
| */ |
| struct mobility_domain_info { |
| uint8_t mdie_present; |
| uint16_t mobility_domain; |
| }; |
| |
| #define WMI_HOST_ROAM_OFFLOAD_NUM_MCS_SET (16) |
| |
| /* This TLV will be filled only in case roam offload |
| * for wpa2-psk/pmkid/ese/11r is enabled */ |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_roam_offload_fixed_param |
| */ |
| uint32_t tlv_header; |
| uint32_t rssi_cat_gap; /* gap for every category bucket */ |
| uint32_t prefer_5g; /* prefer select 5G candidate */ |
| uint32_t select_5g_margin; |
| uint32_t reassoc_failure_timeout; /* reassoc failure timeout */ |
| uint32_t capability; |
| uint32_t ht_caps_info; |
| uint32_t ampdu_param; |
| uint32_t ht_ext_cap; |
| uint32_t ht_txbf; |
| uint32_t asel_cap; |
| uint32_t qos_enabled; |
| uint32_t qos_caps; |
| uint32_t wmm_caps; |
| /* since this is 4 byte aligned, we don't declare it as tlv array */ |
| uint32_t mcsset[WMI_HOST_ROAM_OFFLOAD_NUM_MCS_SET >> 2]; |
| } roam_offload_param; |
| |
| #define WMI_FILS_MAX_RRK_LENGTH 64 |
| #define WMI_FILS_MAX_RIK_LENGTH WMI_FILS_MAX_RRK_LENGTH |
| #define WMI_FILS_MAX_REALM_LENGTH 256 |
| #define WMI_FILS_MAX_USERNAME_LENGTH 16 |
| |
| /** |
| * struct roam_fils_params - Roam FILS params |
| * @username: username |
| * @username_length: username length |
| * @next_erp_seq_num: next ERP sequence number |
| * @rrk: RRK |
| * @rrk_length: length of @rrk |
| * @rik: RIK |
| * @rik_length: length of @rik |
| * @realm: realm |
| * @realm_len: length of @realm |
| */ |
| struct roam_fils_params { |
| uint8_t username[WMI_FILS_MAX_USERNAME_LENGTH]; |
| uint32_t username_length; |
| uint32_t next_erp_seq_num; |
| uint8_t rrk[WMI_FILS_MAX_RRK_LENGTH]; |
| uint32_t rrk_length; |
| uint8_t rik[WMI_FILS_MAX_RIK_LENGTH]; |
| uint32_t rik_length; |
| uint8_t realm[WMI_FILS_MAX_REALM_LENGTH]; |
| uint32_t realm_len; |
| }; |
| |
| /* struct roam_offload_scan_params - structure |
| * containing roaming offload scan parameters |
| * @is_roam_req_valid: flag to tell whether roam req |
| * is valid or NULL |
| * @mode: stores flags for scan |
| * @vdev_id: vdev id |
| * @roam_offload_enabled: flag for offload enable |
| * @psk_pmk: pre shared key/pairwise master key |
| * @pmk_len: length of PMK |
| * @prefer_5ghz: prefer select 5G candidate |
| * @roam_rssi_cat_gap: gap for every category bucket |
| * @select_5ghz_margin: select 5 Ghz margin |
| * @krk: KRK |
| * @btk: BTK |
| * @reassoc_failure_timeout: reassoc failure timeout |
| * @rokh_id_length: r0kh id length |
| * @rokh_id: r0kh id |
| * @roam_key_mgmt_offload_enabled: roam offload flag |
| * @auth_mode: authentication mode |
| * @fw_okc: use OKC in firmware |
| * @fw_pmksa_cache: use PMKSA cache in firmware |
| * @is_ese_assoc: flag to determine ese assoc |
| * @mdid: mobility domain info |
| * @roam_offload_params: roam offload tlv params |
| * @assoc_ie_length: Assoc IE length |
| * @assoc_ie: Assoc IE buffer |
| * @add_fils_tlv: add FILS TLV boolean |
| * @roam_fils_params: roam fils params |
| */ |
| struct roam_offload_scan_params { |
| uint8_t is_roam_req_valid; |
| uint32_t mode; |
| uint32_t vdev_id; |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| uint8_t roam_offload_enabled; |
| uint8_t psk_pmk[WMI_ROAM_SCAN_PSK_SIZE]; |
| uint32_t pmk_len; |
| uint8_t prefer_5ghz; |
| uint8_t roam_rssi_cat_gap; |
| uint8_t select_5ghz_margin; |
| uint8_t krk[WMI_KRK_KEY_LEN]; |
| uint8_t btk[WMI_BTK_KEY_LEN]; |
| uint32_t reassoc_failure_timeout; |
| uint32_t rokh_id_length; |
| uint8_t rokh_id[WMI_ROAM_R0KH_ID_MAX_LEN]; |
| uint8_t roam_key_mgmt_offload_enabled; |
| int auth_mode; |
| bool fw_okc; |
| bool fw_pmksa_cache; |
| #endif |
| bool is_ese_assoc; |
| struct mobility_domain_info mdid; |
| #ifdef CONFIG_MCL |
| /* THis is not available in non tlv target. |
| * please remove this and replace with a host based |
| * structure */ |
| roam_offload_param roam_offload_params; |
| #endif |
| uint32_t assoc_ie_length; |
| uint8_t assoc_ie[MAX_ASSOC_IE_LENGTH]; |
| bool add_fils_tlv; |
| #ifdef WLAN_FEATURE_FILS_SK |
| struct roam_fils_params roam_fils_params; |
| #endif |
| }; |
| |
| /* struct roam_offload_scan_rssi_params - structure containing |
| * parameters for roam offload scan based on RSSI |
| * @rssi_thresh: rssi threshold |
| * @rssi_thresh_diff: difference in rssi threshold |
| * @hi_rssi_scan_max_count: 5G scan max count |
| * @hi_rssi_scan_rssi_delta: 5G scan rssi change threshold value |
| * @hi_rssi_scan_rssi_ub: 5G scan upper bound |
| * @raise_rssi_thresh_5g: flag to determine penalty and boost thresholds |
| * @session_id: vdev id |
| * @penalty_threshold_5g: RSSI threshold below which 5GHz RSSI is penalized |
| * @boost_threshold_5g: RSSI threshold above which 5GHz RSSI is favored |
| * @raise_factor_5g: factor by which 5GHz RSSI is boosted |
| * @drop_factor_5g: factor by which 5GHz RSSI is penalized |
| * @max_raise_rssi_5g: maximum boost that can be applied to a 5GHz RSSI |
| * @max_drop_rssi_5g: maximum penalty that can be applied to a 5GHz RSSI |
| * @good_rssi_threshold: RSSI below which roam is kicked in by background |
| * scan although rssi is still good |
| * @roam_earlystop_thres_min: Minimum RSSI threshold value for early stop, |
| * unit is dB above NF |
| * @roam_earlystop_thres_max: Maximum RSSI threshold value for early stop, |
| * unit is dB above NF |
| * @dense_rssi_thresh_offset: dense roam RSSI threshold difference |
| * @dense_min_aps_cnt: dense roam minimum APs |
| * @initial_dense_status: dense status detected by host |
| * @traffic_threshold: dense roam RSSI threshold |
| * @bg_scan_bad_rssi_thresh: Bad RSSI threshold to perform bg scan |
| * @roam_bad_rssi_thresh_offset_2g: Offset from Bad RSSI threshold for 2G to 5G Roam |
| * @bg_scan_client_bitmap: Bitmap used to identify the client scans to snoop |
| * @flags: Flags for Background Roaming |
| * Bit 0 : BG roaming enabled when we connect to 2G AP only and roaming to 5G AP only. |
| * Bit 1-31: Reserved |
| */ |
| struct roam_offload_scan_rssi_params { |
| int8_t rssi_thresh; |
| uint8_t rssi_thresh_diff; |
| uint32_t hi_rssi_scan_max_count; |
| uint32_t hi_rssi_scan_rssi_delta; |
| int32_t hi_rssi_scan_rssi_ub; |
| int raise_rssi_thresh_5g; |
| uint8_t session_id; |
| uint32_t penalty_threshold_5g; |
| uint32_t boost_threshold_5g; |
| uint8_t raise_factor_5g; |
| uint8_t drop_factor_5g; |
| int max_raise_rssi_5g; |
| int max_drop_rssi_5g; |
| uint32_t good_rssi_threshold; |
| uint32_t roam_earlystop_thres_min; |
| uint32_t roam_earlystop_thres_max; |
| int dense_rssi_thresh_offset; |
| int dense_min_aps_cnt; |
| int initial_dense_status; |
| int traffic_threshold; |
| int32_t rssi_thresh_offset_5g; |
| int8_t bg_scan_bad_rssi_thresh; |
| uint8_t roam_bad_rssi_thresh_offset_2g; |
| uint32_t bg_scan_client_bitmap; |
| uint32_t flags; |
| }; |
| |
| /** |
| * struct ap_profile - Structure ap profile to match candidate |
| * @flags: flags |
| * @rssi_threshold: the value of the the candidate AP should higher by this |
| * threshold than the rssi of the currrently associated AP |
| * @ssid: ssid vlaue to be matched |
| * @rsn_authmode: security params to be matched |
| * @rsn_ucastcipherset: unicast cipher set |
| * @rsn_mcastcipherset: mcast/group cipher set |
| * @rsn_mcastmgmtcipherset: mcast/group management frames cipher set |
| * @rssi_abs_thresh: the value of the candidate AP should higher than this |
| * absolute RSSI threshold. Zero means no absolute minimum |
| * RSSI is required. units are the offset from the noise |
| * floor in dB |
| */ |
| struct ap_profile { |
| uint32_t flags; |
| uint32_t rssi_threshold; |
| struct mac_ssid ssid; |
| uint32_t rsn_authmode; |
| uint32_t rsn_ucastcipherset; |
| uint32_t rsn_mcastcipherset; |
| uint32_t rsn_mcastmgmtcipherset; |
| uint32_t rssi_abs_thresh; |
| }; |
| |
| /** |
| * struct rssi_scoring - rssi scoring param to sortlist selected AP |
| * @best_rssi_threshold: Roamable AP RSSI equal or better than this threshold, |
| * full rssi score 100. Units in dBm. |
| * @good_rssi_threshold: Below threshold, scoring linear percentage between |
| * rssi_good_pnt and 100. Units in dBm. |
| * @bad_rssi_threshold: Between good and bad rssi threshold, scoring linear |
| * % between rssi_bad_pcnt and rssi_good_pct in dBm. |
| * @good_rssi_pcnt: Used to assigned scoring percentage of each slot between |
| * best to good rssi threshold. Units in percentage. |
| * @bad_rssi_pcnt: Used to assigned scoring percentage of each slot between good |
| * to bad rssi threshold. Unites in percentage. |
| * @good_bucket_size : bucket size of slot in good zone |
| * @bad_bucket_size : bucket size of slot in bad zone |
| * @rssi_pref_5g_rssi_thresh: Below rssi threshold, 5G AP have given preference |
| * of band percentage. Units in dBm. |
| */ |
| struct rssi_scoring { |
| int32_t best_rssi_threshold; |
| int32_t good_rssi_threshold; |
| int32_t bad_rssi_threshold; |
| uint32_t good_rssi_pcnt; |
| uint32_t bad_rssi_pcnt; |
| uint32_t good_bucket_size; |
| uint32_t bad_bucket_size; |
| int32_t rssi_pref_5g_rssi_thresh; |
| }; |
| |
| /** |
| * struct param_slot_scoring - define % score for differents slots for a |
| * scoring param. |
| * @num_slot: number of slots in which the param will be divided. |
| * Max 15. index 0 is used for 'not_present. Num_slot will |
| * equally divide 100. e.g, if num_slot = 4 slot 0 = 0-25%, slot |
| * 1 = 26-50% slot 2 = 51-75%, slot 3 = 76-100% |
| * @score_pcnt3_to_0: Conatins score percentage for slot 0-3 |
| * BITS 0-7 :- the scoring pcnt when not present |
| * BITS 8-15 :- SLOT_1 |
| * BITS 16-23 :- SLOT_2 |
| * BITS 24-31 :- SLOT_3 |
| * @score_pcnt7_to_4: Conatins score percentage for slot 4-7 |
| * BITS 0-7 :- SLOT_4 |
| * BITS 8-15 :- SLOT_5 |
| * BITS 16-23 :- SLOT_6 |
| * BITS 24-31 :- SLOT_7 |
| * @score_pcnt11_to_8: Conatins score percentage for slot 8-11 |
| * BITS 0-7 :- SLOT_8 |
| * BITS 8-15 :- SLOT_9 |
| * BITS 16-23 :- SLOT_10 |
| * BITS 24-31 :- SLOT_11 |
| * @score_pcnt15_to_12: Conatins score percentage for slot 12-15 |
| * BITS 0-7 :- SLOT_12 |
| * BITS 8-15 :- SLOT_13 |
| * BITS 16-23 :- SLOT_14 |
| * BITS 24-31 :- SLOT_15 |
| */ |
| struct param_slot_scoring { |
| uint32_t num_slot; |
| uint32_t score_pcnt3_to_0; |
| uint32_t score_pcnt7_to_4; |
| uint32_t score_pcnt11_to_8; |
| uint32_t score_pcnt15_to_12; |
| }; |
| |
| /** |
| * struct scoring_param - scoring param to sortlist selected AP |
| * @disable_bitmap: Each bit will be either allow(0)/disallow(1) to |
| * considered the roam score param. |
| * @rssi_weightage: RSSI weightage out of total score in % |
| * @ht_weightage: HT weightage out of total score in %. |
| * @vht_weightage: VHT weightage out of total score in %. |
| * @he_weightaget: 11ax weightage out of total score in %. |
| * @bw_weightage: Bandwidth weightage out of total score in %. |
| * @band_weightage: Band(2G/5G) weightage out of total score in %. |
| * @nss_weightage: NSS(1x1 / 2x2)weightage out of total score in %. |
| * @esp_qbss_weightage: ESP/QBSS weightage out of total score in %. |
| * @beamforming_weightage: Beamforming weightage out of total score in %. |
| * @pcl_weightage: PCL weightage out of total score in %. |
| * @oce_wan_weightage OCE WAN metrics weightage out of total score in %. |
| * @bw_index_score: channel BW scoring percentage information. |
| * BITS 0-7 :- It contains scoring percentage of 20MHz BW |
| * BITS 8-15 :- It contains scoring percentage of 40MHz BW |
| * BITS 16-23 :- It contains scoring percentage of 80MHz BW |
| * BITS 24-31 :- It contains scoring percentage of 1600MHz BW |
| * The value of each index must be 0-100 |
| * @band_index_score: band scording percentage information. |
| * BITS 0-7 :- It contains scoring percentage of 2G |
| * BITS 8-15 :- It contains scoring percentage of 5G |
| * BITS 16-23 :- reserved |
| * BITS 24-31 :- reserved |
| * The value of each index must be 0-100 |
| * @nss_index_score: NSS scoring percentage information. |
| * BITS 0-7 :- It contains scoring percentage of 1x1 |
| * BITS 8-15 :- It contains scoring percentage of 2x2 |
| * BITS 16-23 :- It contains scoring percentage of 3x3 |
| * BITS 24-31 :- It contains scoring percentage of 4x4 |
| * The value of each index must be 0-100 |
| * @rssi_scoring: RSSI scoring information. |
| * @esp_qbss_scoring: ESP/QBSS scoring percentage information |
| * @oce_wan_scoring: OCE WAN metrics percentage information |
| */ |
| struct scoring_param { |
| uint32_t disable_bitmap; |
| int32_t rssi_weightage; |
| int32_t ht_weightage; |
| int32_t vht_weightage; |
| int32_t he_weightage; |
| int32_t bw_weightage; |
| int32_t band_weightage; |
| int32_t nss_weightage; |
| int32_t esp_qbss_weightage; |
| int32_t beamforming_weightage; |
| int32_t pcl_weightage; |
| int32_t oce_wan_weightage; |
| uint32_t bw_index_score; |
| uint32_t band_index_score; |
| uint32_t nss_index_score; |
| struct rssi_scoring rssi_scoring; |
| struct param_slot_scoring esp_qbss_scoring; |
| struct param_slot_scoring oce_wan_scoring; |
| }; |
| |
| /** |
| * struct ap_profile_params - ap profile params |
| * @vdev_id: vdev id |
| * @profile: ap profile to match candidate |
| * @param: scoring params to short candidate |
| */ |
| struct ap_profile_params { |
| uint8_t vdev_id; |
| struct ap_profile profile; |
| struct scoring_param param; |
| }; |
| |
| /** |
| * struct wifi_epno_network - enhanced pno network block |
| * @ssid: ssid |
| * @rssi_threshold: threshold for considering this SSID as found, required |
| * granularity for this threshold is 4dBm to 8dBm |
| * @flags: WIFI_PNO_FLAG_XXX |
| * @auth_bit_field: auth bit field for matching WPA IE |
| */ |
| struct wifi_epno_network_params { |
| struct mac_ssid ssid; |
| int8_t rssi_threshold; |
| uint8_t flags; |
| uint8_t auth_bit_field; |
| }; |
| |
| /** |
| * struct wifi_enhanched_pno_params - enhanced pno network params |
| * @request_id: request id number |
| * @session_id: session_id number |
| * @min_5ghz_rssi: minimum 5GHz RSSI for a BSSID to be considered |
| * @min_24ghz_rssi: minimum 2.4GHz RSSI for a BSSID to be considered |
| * @initial_score_max: maximum score that a network can have before bonuses |
| * @current_connection_bonus: only report when there is a network's score this |
| * much higher than the current connection |
| * @same_network_bonus: score bonus for all n/w with the same network flag |
| * @secure_bonus: score bonus for networks that are not open |
| * @band_5ghz_bonus: 5GHz RSSI score bonus (applied to all 5GHz networks) |
| * @num_networks: number of ssids |
| * @networks: EPNO networks |
| */ |
| struct wifi_enhanched_pno_params { |
| uint32_t request_id; |
| uint32_t session_id; |
| uint32_t min_5ghz_rssi; |
| uint32_t min_24ghz_rssi; |
| uint32_t initial_score_max; |
| uint32_t current_connection_bonus; |
| uint32_t same_network_bonus; |
| uint32_t secure_bonus; |
| uint32_t band_5ghz_bonus; |
| uint32_t num_networks; |
| struct wifi_epno_network_params networks[]; |
| }; |
| |
| enum { |
| WMI_AP_RX_DATA_OFFLOAD = 0x00, |
| WMI_STA_RX_DATA_OFFLOAD = 0x01, |
| }; |
| |
| /** |
| * enum extscan_configuration_flags - extscan config flags |
| * @WMI_EXTSCAN_LP_EXTENDED_BATCHING: extended batching |
| */ |
| enum wmi_extscan_configuration_flags { |
| WMI_EXTSCAN_LP_EXTENDED_BATCHING = 0x00000001, |
| }; |
| |
| /** |
| * enum extscan_report_events_type - extscan report events type |
| * @EXTSCAN_REPORT_EVENTS_BUFFER_FULL: report only when scan history is % full |
| * @EXTSCAN_REPORT_EVENTS_EACH_SCAN: report a scan completion event after scan |
| * @EXTSCAN_REPORT_EVENTS_FULL_RESULTS: forward scan results |
| * (beacons/probe responses + IEs) |
| * in real time to HAL, in addition to completion events. |
| * Note: To keep backward compatibility, |
| * fire completion events regardless of REPORT_EVENTS_EACH_SCAN. |
| * @EXTSCAN_REPORT_EVENTS_NO_BATCH: controls batching, |
| * 0 => batching, 1 => no batching |
| */ |
| enum wmi_extscan_report_events_type { |
| WMI_EXTSCAN_REPORT_EVENTS_BUFFER_FULL = 0x00, |
| WMI_EXTSCAN_REPORT_EVENTS_EACH_SCAN = 0x01, |
| WMI_EXTSCAN_REPORT_EVENTS_FULL_RESULTS = 0x02, |
| WMI_EXTSCAN_REPORT_EVENTS_NO_BATCH = 0x04, |
| }; |
| |
| /** |
| * struct ipa_offload_control_params - ipa offload parameters |
| * @offload_type: ipa offload type |
| * @vdev_id: vdev id |
| * @enable: ipa offload enable/disable |
| */ |
| struct ipa_offload_control_params { |
| uint32_t offload_type; |
| uint32_t vdev_id; |
| uint32_t enable; |
| }; |
| |
| /** |
| * struct extscan_capabilities_params - ext scan capablities |
| * @request_id: request_id |
| * @session_id: session_id |
| */ |
| struct extscan_capabilities_params { |
| uint32_t request_id; |
| uint8_t session_id; |
| }; |
| |
| /** |
| * struct extscan_capabilities_reset_params - ext scan capablities reset parameter |
| * @request_id: request_id |
| * @session_id: session_id |
| */ |
| struct extscan_capabilities_reset_params { |
| uint32_t request_id; |
| uint8_t session_id; |
| }; |
| |
| /** |
| * struct extscan_bssid_hotlist_reset_params - ext scan hotlist reset parameter |
| * @request_id: request_id |
| * @session_id: session_id |
| */ |
| struct extscan_bssid_hotlist_reset_params { |
| uint32_t request_id; |
| uint8_t session_id; |
| }; |
| |
| /** |
| * struct extscan_stop_req_params - ext scan stop parameter |
| * @request_id: request_id |
| * @session_id: session_id |
| */ |
| struct extscan_stop_req_params { |
| uint32_t request_id; |
| uint8_t session_id; |
| }; |
| |
| /** |
| * struct ap_threshold_params - ap threshold parameter |
| * @bssid: mac address |
| * @low: low threshold |
| * @high: high threshold |
| */ |
| struct ap_threshold_params { |
| struct qdf_mac_addr bssid; |
| int32_t low; |
| int32_t high; |
| }; |
| |
| /** |
| * struct extscan_set_sig_changereq_params - ext scan channel parameter |
| * @request_id: mac address |
| * @session_id: low threshold |
| * @rssi_sample_size: Number of samples for averaging RSSI |
| * @lostap_sample_size: Number of missed samples to confirm AP loss |
| * @min_breaching: Number of APs breaching threshold required for firmware |
| * @num_ap: no of scanned ap |
| * @ap: ap threshold parameter |
| */ |
| struct extscan_set_sig_changereq_params { |
| uint32_t request_id; |
| uint8_t session_id; |
| uint32_t rssi_sample_size; |
| uint32_t lostap_sample_size; |
| uint32_t min_breaching; |
| uint32_t num_ap; |
| struct ap_threshold_params ap[WMI_EXTSCAN_MAX_SIGNIFICANT_CHANGE_APS]; |
| }; |
| |
| /** |
| * struct extscan_cached_result_params - ext scan cached parameter |
| * @request_id: mac address |
| * @session_id: low threshold |
| * @flush: cached results flush |
| */ |
| struct extscan_cached_result_params { |
| uint32_t request_id; |
| uint8_t session_id; |
| bool flush; |
| }; |
| |
| #define WMI_WLAN_EXTSCAN_MAX_CHANNELS 36 |
| #define WMI_WLAN_EXTSCAN_MAX_BUCKETS 16 |
| #define WMI_WLAN_EXTSCAN_MAX_HOTLIST_APS 128 |
| #define WMI_WLAN_EXTSCAN_MAX_SIGNIFICANT_CHANGE_APS 64 |
| #define WMI_EXTSCAN_MAX_HOTLIST_SSIDS 8 |
| |
| /** |
| * struct wifi_scan_channelspec_params - wifi scan channel parameter |
| * @channel: Frequency in MHz |
| * @dwellTimeMs: dwell time |
| * @flush: cached results flush |
| * @passive: passive scan |
| * @chnlClass: channel class |
| */ |
| struct wifi_scan_channelspec_params { |
| uint32_t channel; |
| uint32_t dwellTimeMs; |
| bool passive; |
| uint8_t chnlClass; |
| }; |
| |
| /** |
| * enum wmi_wifi_band - wifi band |
| * @WMI_WIFI_BAND_UNSPECIFIED: unspecified band |
| * @WMI_WIFI_BAND_BG: 2.4 GHz |
| * @WMI_WIFI_BAND_A: 5 GHz without DFS |
| * @WMI_WIFI_BAND_ABG: 2.4 GHz + 5 GHz; no DFS |
| * @WMI_WIFI_BAND_A_DFS_ONLY: 5 GHz DFS only |
| * @WMI_WIFI_BAND_A_WITH_DFS: 5 GHz with DFS |
| * @WMI_WIFI_BAND_ABG_WITH_DFS: 2.4 GHz + 5 GHz with DFS |
| * @WMI_WIFI_BAND_MAX: max range |
| */ |
| enum wmi_wifi_band { |
| WMI_WIFI_BAND_UNSPECIFIED, |
| WMI_WIFI_BAND_BG = 1, |
| WMI_WIFI_BAND_A = 2, |
| WMI_WIFI_BAND_ABG = 3, |
| WMI_WIFI_BAND_A_DFS_ONLY = 4, |
| /* 5 is reserved */ |
| WMI_WIFI_BAND_A_WITH_DFS = 6, |
| WMI_WIFI_BAND_ABG_WITH_DFS = 7, |
| /* Keep it last */ |
| WMI_WIFI_BAND_MAX |
| }; |
| |
| /** |
| * struct wifi_scan_bucket_params - wifi scan bucket spec |
| * @bucket: bucket identifier |
| * @band: wifi band |
| * @period: Desired period, in millisecond; if this is too |
| * low, the firmware should choose to generate results as fast as |
| * it can instead of failing the command byte |
| * for exponential backoff bucket this is the min_period |
| * @reportEvents: 0 => normal reporting (reporting rssi history |
| * only, when rssi history buffer is % full) |
| * 1 => same as 0 + report a scan completion event after scanning |
| * this bucket |
| * 2 => same as 1 + forward scan results |
| * (beacons/probe responses + IEs) in real time to HAL |
| * @max_period: if max_period is non zero or different than period, |
| * then this bucket is an exponential backoff bucket and |
| * the scan period will grow exponentially as per formula: |
| * actual_period(N) = period ^ (N/(step_count+1)) to a |
| * maximum period of max_period |
| * @exponent: for exponential back off bucket: multiplier: |
| * new_period = old_period * exponent |
| * @step_count: for exponential back off bucket, number of scans performed |
| * at a given period and until the exponent is applied |
| * @numChannels: channels to scan; these may include DFS channels |
| * Note that a given channel may appear in multiple buckets |
| * @min_dwell_time_active: per bucket minimum active dwell time |
| * @max_dwell_time_active: per bucket maximum active dwell time |
| * @min_dwell_time_passive: per bucket minimum passive dwell time |
| * @max_dwell_time_passive: per bucket maximum passive dwell time |
| * @channels: Channel list |
| */ |
| struct wifi_scan_bucket_params { |
| uint8_t bucket; |
| enum wmi_wifi_band band; |
| uint32_t period; |
| uint32_t reportEvents; |
| uint32_t max_period; |
| uint32_t exponent; |
| uint32_t step_count; |
| uint32_t numChannels; |
| uint32_t min_dwell_time_active; |
| uint32_t max_dwell_time_active; |
| uint32_t min_dwell_time_passive; |
| uint32_t max_dwell_time_passive; |
| struct wifi_scan_channelspec_params channels[WMI_WLAN_EXTSCAN_MAX_CHANNELS]; |
| }; |
| |
| /** |
| * struct wifi_scan_cmd_req_params - wifi scan command request params |
| * @basePeriod: base timer period |
| * @maxAPperScan: max ap per scan |
| * @report_threshold_percent: report threshold |
| * in %, when buffer is this much full, wake up host |
| * @report_threshold_num_scans: report threshold number of scans |
| * in number of scans, wake up host after these many scans |
| * @requestId: request id |
| * @sessionId: session id |
| * @numBuckets: number of buckets |
| * @min_dwell_time_active: per bucket minimum active dwell time |
| * @max_dwell_time_active: per bucket maximum active dwell time |
| * @min_dwell_time_passive: per bucket minimum passive dwell time |
| * @max_dwell_time_passive: per bucket maximum passive dwell time |
| * @configuration_flags: configuration flags |
| * @extscan_adaptive_dwell_mode: adaptive dwelltime mode for extscan |
| * @buckets: buckets array |
| */ |
| struct wifi_scan_cmd_req_params { |
| uint32_t basePeriod; |
| uint32_t maxAPperScan; |
| |
| uint32_t report_threshold_percent; |
| uint32_t report_threshold_num_scans; |
| |
| uint32_t requestId; |
| uint8_t sessionId; |
| uint32_t numBuckets; |
| |
| uint32_t min_dwell_time_active; |
| uint32_t max_dwell_time_active; |
| uint32_t min_dwell_time_passive; |
| uint32_t max_dwell_time_passive; |
| uint32_t configuration_flags; |
| enum wmi_dwelltime_adaptive_mode extscan_adaptive_dwell_mode; |
| struct wifi_scan_bucket_params buckets[WMI_WLAN_EXTSCAN_MAX_BUCKETS]; |
| }; |
| |
| #define WMI_CFG_VALID_CHANNEL_LIST_LEN 100 |
| /* Occupied channel list remains static */ |
| #define WMI_CHANNEL_LIST_STATIC 1 |
| /* Occupied channel list can be learnt after init */ |
| #define WMI_CHANNEL_LIST_DYNAMIC_INIT 2 |
| /* Occupied channel list can be learnt after flush */ |
| #define WMI_CHANNEL_LIST_DYNAMIC_FLUSH 3 |
| /* Occupied channel list can be learnt after update */ |
| #define WMI_CHANNEL_LIST_DYNAMIC_UPDATE 4 |
| |
| /** |
| * struct plm_req_params - plm req parameter |
| * @diag_token: Dialog token |
| * @meas_token: measurement token |
| * @num_bursts: total number of bursts |
| * @burst_int: burst interval in seconds |
| * @meas_duration:in TU's,STA goes off-ch |
| * @burst_len: no of times the STA should cycle through PLM ch list |
| * @desired_tx_pwr: desired tx power |
| * @mac_addr: MC dest addr |
| * @plm_num_ch: channel numbers |
| * @plm_ch_list: channel list |
| * @session_id: session id |
| * @enable: enable/disable |
| */ |
| struct plm_req_params { |
| uint16_t diag_token; |
| uint16_t meas_token; |
| uint16_t num_bursts; |
| uint16_t burst_int; |
| uint16_t meas_duration; |
| /* no of times the STA should cycle through PLM ch list */ |
| uint8_t burst_len; |
| int8_t desired_tx_pwr; |
| struct qdf_mac_addr mac_addr; |
| /* no of channels */ |
| uint8_t plm_num_ch; |
| /* channel numbers */ |
| uint8_t plm_ch_list[WMI_CFG_VALID_CHANNEL_LIST_LEN]; |
| uint8_t session_id; |
| bool enable; |
| }; |
| |
| #define MAX_SSID_ALLOWED_LIST 4 |
| #define MAX_BSSID_AVOID_LIST 16 |
| #define MAX_BSSID_FAVORED 16 |
| #define MAX_RSSI_AVOID_BSSID_LIST 10 |
| |
| /** |
| * struct mac_ts_info_tfc - mac ts info parameters |
| * @burstSizeDefn: burst size |
| * @reserved: reserved |
| * @ackPolicy: ack policy |
| * @psb: psb |
| * @aggregation: aggregation |
| * @accessPolicy: access policy |
| * @direction: direction |
| * @tsid: direction |
| * @trafficType: traffic type |
| */ |
| struct mac_ts_info_tfc { |
| #ifndef ANI_LITTLE_BIT_ENDIAN |
| uint8_t burstSizeDefn:1; |
| uint8_t reserved:7; |
| #else |
| uint8_t reserved:7; |
| uint8_t burstSizeDefn:1; |
| #endif |
| |
| #ifndef ANI_LITTLE_BIT_ENDIAN |
| uint16_t ackPolicy:2; |
| uint16_t userPrio:3; |
| uint16_t psb:1; |
| uint16_t aggregation:1; |
| uint16_t accessPolicy:2; |
| uint16_t direction:2; |
| uint16_t tsid:4; |
| uint16_t trafficType:1; |
| #else |
| uint16_t trafficType:1; |
| uint16_t tsid:4; |
| uint16_t direction:2; |
| uint16_t accessPolicy:2; |
| uint16_t aggregation:1; |
| uint16_t psb:1; |
| uint16_t userPrio:3; |
| uint16_t ackPolicy:2; |
| #endif |
| } qdf_packed; |
| |
| /** |
| * struct mac_ts_info_sch - mac ts info schedule parameters |
| * @rsvd: reserved |
| * @schedule: schedule bit |
| */ |
| struct mac_ts_info_sch { |
| #ifndef ANI_LITTLE_BIT_ENDIAN |
| uint8_t rsvd:7; |
| uint8_t schedule:1; |
| #else |
| uint8_t schedule:1; |
| uint8_t rsvd:7; |
| #endif |
| } qdf_packed; |
| |
| /** |
| * struct mac_ts_info_sch - mac ts info schedule parameters |
| * @traffic: mac tfc parameter |
| * @schedule: mac schedule parameters |
| */ |
| struct mac_ts_info { |
| struct mac_ts_info_tfc traffic; |
| struct mac_ts_info_sch schedule; |
| } qdf_packed; |
| |
| /** |
| * struct mac_tspec_ie - mac ts spec |
| * @type: type |
| * @length: length |
| * @tsinfo: tsinfo |
| * @nomMsduSz: nomMsduSz |
| * @maxMsduSz: maxMsduSz |
| * @minSvcInterval: minSvcInterval |
| * @maxSvcInterval: maxSvcInterval |
| * @inactInterval: inactInterval |
| * @suspendInterval: suspendInterval |
| * @svcStartTime: svcStartTime |
| * @minDataRate: minDataRate |
| * @meanDataRate: meanDataRate |
| * @peakDataRate: peakDataRate |
| * @maxBurstSz: maxBurstSz |
| * @delayBound: delayBound |
| * @minPhyRate: minPhyRate |
| * @surplusBw: surplusBw |
| * @mediumTime: mediumTime |
| */ |
| struct mac_tspec_ie { |
| uint8_t type; |
| uint8_t length; |
| struct mac_ts_info tsinfo; |
| uint16_t nomMsduSz; |
| uint16_t maxMsduSz; |
| uint32_t minSvcInterval; |
| uint32_t maxSvcInterval; |
| uint32_t inactInterval; |
| uint32_t suspendInterval; |
| uint32_t svcStartTime; |
| uint32_t minDataRate; |
| uint32_t meanDataRate; |
| uint32_t peakDataRate; |
| uint32_t maxBurstSz; |
| uint32_t delayBound; |
| uint32_t minPhyRate; |
| uint16_t surplusBw; |
| uint16_t mediumTime; |
| } qdf_packed; |
| |
| /** |
| * struct add_ts_param - ADDTS related parameters |
| * @staIdx: station index |
| * @tspecIdx: TSPEC handler uniquely identifying a TSPEC for a STA in a BSS |
| * @tspec: tspec value |
| * @status: CDF status |
| * @sessionId: session id |
| * @tsm_interval: TSM interval period passed from UMAC to WMI |
| * @setRICparams: RIC parameters |
| * @sme_session_id: sme session id |
| */ |
| struct add_ts_param { |
| uint16_t staIdx; |
| uint16_t tspecIdx; |
| struct mac_tspec_ie tspec; |
| QDF_STATUS status; |
| uint8_t sessionId; |
| #ifdef FEATURE_WLAN_ESE |
| uint16_t tsm_interval; |
| #endif /* FEATURE_WLAN_ESE */ |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| uint8_t setRICparams; |
| #endif /* WLAN_FEATURE_ROAM_OFFLOAD */ |
| uint8_t sme_session_id; |
| }; |
| |
| /** |
| * struct delts_req_info - DELTS request parameter |
| * @tsinfo: ts info |
| * @tspec: ts spec |
| * @wmeTspecPresent: wme ts spec flag |
| * @wsmTspecPresent: wsm ts spec flag |
| * @lleTspecPresent: lle ts spec flag |
| */ |
| struct delts_req_info { |
| struct mac_ts_info tsinfo; |
| struct mac_tspec_ie tspec; |
| uint8_t wmeTspecPresent:1; |
| uint8_t wsmTspecPresent:1; |
| uint8_t lleTspecPresent:1; |
| }; |
| |
| /** |
| * struct del_ts_params - DELTS related parameters |
| * @staIdx: station index |
| * @tspecIdx: TSPEC identifier uniquely identifying a TSPEC for a STA in a BSS |
| * @bssId: BSSID |
| * @sessionId: session id |
| * @userPrio: user priority |
| * @delTsInfo: DELTS info |
| * @setRICparams: RIC parameters |
| */ |
| struct del_ts_params { |
| uint16_t staIdx; |
| uint16_t tspecIdx; |
| uint8_t bssId[IEEE80211_ADDR_LEN]; |
| uint8_t sessionId; |
| uint8_t userPrio; |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| struct delts_req_info delTsInfo; |
| uint8_t setRICparams; |
| #endif /* WLAN_FEATURE_ROAM_OFFLOAD */ |
| }; |
| |
| /** |
| * struct ll_stats_clear_params - ll stats clear parameter |
| * @req_id: request id |
| * @sta_id: sta id |
| * @stats_clear_mask: stats clear mask |
| * @stop_req: stop request |
| */ |
| struct ll_stats_clear_params { |
| uint32_t req_id; |
| uint8_t sta_id; |
| uint32_t stats_clear_mask; |
| uint8_t stop_req; |
| }; |
| |
| /** |
| * struct ll_stats_set_params - ll stats get parameter |
| * @req_id: request id |
| * @sta_id: sta id |
| * @mpdu_size_threshold: mpdu sixe threshold |
| * @aggressive_statistics_gathering: aggressive_statistics_gathering |
| */ |
| struct ll_stats_set_params { |
| uint32_t req_id; |
| uint8_t sta_id; |
| uint32_t mpdu_size_threshold; |
| uint32_t aggressive_statistics_gathering; |
| }; |
| |
| /** |
| * struct ll_stats_get_params - ll stats parameter |
| * @req_id: request id |
| * @sta_id: sta id |
| * @param_id_mask: param is mask |
| */ |
| struct ll_stats_get_params { |
| uint32_t req_id; |
| uint8_t sta_id; |
| uint32_t param_id_mask; |
| }; |
| |
| |
| /** |
| * struct link_status_params - link stats parameter |
| * @msg_type: message type is same as the request type |
| * @msg_len: length of the entire request |
| * @link_status: wme ts spec flag |
| * @session_id: wsm ts spec flag |
| */ |
| struct link_status_params { |
| uint16_t msg_type; |
| uint16_t msg_len; |
| uint8_t link_status; |
| uint8_t session_id; |
| }; |
| |
| /** |
| * struct dhcp_stop_ind_params - DHCP Stop indication message |
| * @msgtype: message type is same as the request type |
| * @msglen: length of the entire request |
| * @device_mode: Mode of the device(ex:STA, AP) |
| * @adapter_macaddr: MAC address of the adapter |
| * @peer_macaddr: MAC address of the connected peer |
| */ |
| struct dhcp_stop_ind_params { |
| uint16_t msgtype; |
| uint16_t msglen; |
| uint8_t device_mode; |
| struct qdf_mac_addr adapter_macaddr; |
| struct qdf_mac_addr peer_macaddr; |
| }; |
| |
| /** |
| * struct aggr_add_ts_param - ADDTS parameters |
| * @staIdx: station index |
| * @tspecIdx: TSPEC handler uniquely identifying a TSPEC for a STA in a BSS |
| * @tspec: tspec value |
| * @status: CDF status |
| * @sessionId: session id |
| */ |
| struct aggr_add_ts_param { |
| uint16_t staIdx; |
| uint16_t tspecIdx; |
| struct mac_tspec_ie tspec[WMI_QOS_NUM_AC_MAX]; |
| QDF_STATUS status[WMI_QOS_NUM_AC_MAX]; |
| uint8_t sessionId; |
| }; |
| |
| |
| /** |
| * struct wlm_latency_level_param - WLM parameters |
| * @wlm_latency_level: wlm latency level to set |
| * 0 - normal, 1 - moderate, 2 - low, 3 - ultralow |
| * @wlm_latency_flags: wlm latency flags to set |
| * |31 12| 11 | 10 |9 8|7 6|5 4|3 2| 1 | 0 | |
| * +------+------+------+------+------+------+------+-----+-----+ |
| * | RSVD | SSLP | CSLP | RSVD | Roam | RSVD | DWLT | DFS | SUP | |
| * +------+-------------+-------------+-------------------------+ |
| * | WAL | PS | Roam | Scan | |
| * |
| * bit 0: Avoid scan request from HLOS if setting |
| * bit 1: Skip DFS channel SCAN if setting |
| * bit 2-3: Define policy of dwell time/duration for each foreign channel |
| * (b2 b3) |
| * (0 0 ): Default scan dwell time |
| * (0 1 ): Reserve |
| * (1 0 ): Shrink off channel dwell time |
| * (1 1 ): Reserve |
| * bit 4-5: Reserve for scan |
| * bit 6-7: Define roaming policy |
| * (b6 b7) |
| * (0 0 ): Default roaming behavior, allow roaming in all scenarios |
| * (0 1 ): Disallow all roaming |
| * (1 0 ): Allow roaming when final bmissed |
| * (1 1 ): Reserve |
| * bit 8-9: Reserve for roaming |
| * bit 10: Disable css power collapse if setting |
| * bit 11: Disable sys sleep if setting |
| * bit 12-31: Reserve for future useage |
| * @vdev_id: vdev id |
| */ |
| struct wlm_latency_level_param { |
| uint16_t wlm_latency_level; |
| uint32_t wlm_latency_flags; |
| uint16_t vdev_id; |
| }; |
| |
| #define WMI_MAX_FILTER_TEST_DATA_LEN 8 |
| #define WMI_MAX_NUM_MULTICAST_ADDRESS 240 |
| #define WMI_MAX_NUM_FILTERS 20 |
| #define WMI_MAX_NUM_TESTS_PER_FILTER 10 |
| |
| /** |
| * enum packet_filter_type - packet filter type |
| * @WMI_RCV_FILTER_TYPE_INVALID: invalid type |
| * @WMI_RCV_FILTER_TYPE_FILTER_PKT: filter packet type |
| * @WMI_RCV_FILTER_TYPE_BUFFER_PKT: buffer packet type |
| * @WMI_RCV_FILTER_TYPE_MAX_ENUM_SIZE: max enum size |
| */ |
| enum packet_filter_type { |
| WMI_RCV_FILTER_TYPE_INVALID, |
| WMI_RCV_FILTER_TYPE_FILTER_PKT, |
| WMI_RCV_FILTER_TYPE_BUFFER_PKT, |
| WMI_RCV_FILTER_TYPE_MAX_ENUM_SIZE |
| }; |
| |
| /** |
| * enum packet_protocol_type - packet protocol type |
| * @WMI_FILTER_HDR_TYPE_INVALID: invalid type |
| * @WMI_FILTER_HDR_TYPE_MAC: mac type |
| * @WMI_FILTER_HDR_TYPE_ARP: trp type |
| * @WMI_FILTER_HDR_TYPE_IPV4: ipv4 type |
| * @WMI_FILTER_HDR_TYPE_IPV6: ipv6 type |
| * @WMI_FILTER_HDR_TYPE_UDP: udp type |
| * @WMI_FILTER_HDR_TYPE_MAX: max type |
| */ |
| enum packet_protocol_type { |
| WMI_FILTER_HDR_TYPE_INVALID, |
| WMI_FILTER_HDR_TYPE_MAC, |
| WMI_FILTER_HDR_TYPE_ARP, |
| WMI_FILTER_HDR_TYPE_IPV4, |
| WMI_FILTER_HDR_TYPE_IPV6, |
| WMI_FILTER_HDR_TYPE_UDP, |
| WMI_FILTER_HDR_TYPE_MAX |
| }; |
| |
| /** |
| * enum packet_filter_comp_type - packet filter comparison type |
| * @WMI_FILTER_CMP_TYPE_INVALID: invalid type |
| * @WMI_FILTER_CMP_TYPE_EQUAL: type equal |
| * @WMI_FILTER_CMP_TYPE_MASK_EQUAL: mask equal |
| * @WMI_FILTER_CMP_TYPE_NOT_EQUAL: type not equal |
| * @WMI_FILTER_CMP_TYPE_MASK_NOT_EQUAL: mask not equal |
| * @WMI_FILTER_CMP_TYPE_MAX: max type |
| */ |
| enum packet_filter_comp_type { |
| WMI_FILTER_CMP_TYPE_INVALID, |
| WMI_FILTER_CMP_TYPE_EQUAL, |
| WMI_FILTER_CMP_TYPE_MASK_EQUAL, |
| WMI_FILTER_CMP_TYPE_NOT_EQUAL, |
| WMI_FILTER_CMP_TYPE_MASK_NOT_EQUAL, |
| WMI_FILTER_CMP_TYPE_MAX |
| }; |
| |
| /** |
| * struct rcv_pkt_filter_params - recieve packet filter parameters |
| * @protocolLayer - protocol layer |
| * @cmpFlag - comparison flag |
| * @dataLength - data length |
| * @dataOffset - data offset |
| * @reserved - resserved |
| * @compareData - compare data |
| * @dataMask - data mask |
| */ |
| struct rcv_pkt_filter_params { |
| enum packet_protocol_type protocolLayer; |
| enum packet_filter_comp_type cmpFlag; |
| uint16_t dataLength; |
| uint8_t dataOffset; |
| uint8_t reserved; |
| uint8_t compareData[WMI_MAX_FILTER_TEST_DATA_LEN]; |
| uint8_t dataMask[WMI_MAX_FILTER_TEST_DATA_LEN]; |
| }; |
| |
| /** |
| * struct rcv_pkt_filter_config - recieve packet filter info |
| * @filterId - filter id |
| * @filterType - filter type |
| * @numFieldParams - no of fields |
| * @coalesceTime - reserved parameter |
| * @self_macaddr - self mac address |
| * @bssid - Bssid of the connected AP |
| * @paramsData - data parameter |
| */ |
| struct rcv_pkt_filter_config { |
| uint8_t filterId; |
| enum packet_filter_type filterType; |
| uint32_t numFieldParams; |
| uint32_t coalesceTime; |
| struct qdf_mac_addr self_macaddr; |
| struct qdf_mac_addr bssid; |
| struct rcv_pkt_filter_params paramsData[WMI_MAX_NUM_TESTS_PER_FILTER]; |
| }; |
| |
| /** |
| * struct vdev_ie_info_param - IE info |
| * @vdev_id - vdev for which the IE is being sent |
| * @ie_id - ID of the IE |
| * @length - length of the IE data |
| * @data - IE data |
| * |
| * This structure is used to store the IE information. |
| */ |
| struct vdev_ie_info_param { |
| uint32_t vdev_id; |
| uint32_t ie_id; |
| uint32_t length; |
| uint32_t ie_source; |
| uint32_t band; |
| uint8_t *data; |
| }; |
| |
| #define WMI_MAX_NUM_FW_SEGMENTS 4 |
| |
| /** |
| * struct fw_dump_seg_req_param - individual segment details |
| * @seg_id - segment id. |
| * @seg_start_addr_lo - lower address of the segment. |
| * @seg_start_addr_hi - higher address of the segment. |
| * @seg_length - length of the segment. |
| * @dst_addr_lo - lower address of the destination buffer. |
| * @dst_addr_hi - higher address of the destination buffer. |
| * |
| * This structure carries the information to firmware about the |
| * individual segments. This structure is part of firmware memory |
| * dump request. |
| */ |
| struct fw_dump_seg_req_param { |
| uint8_t seg_id; |
| uint32_t seg_start_addr_lo; |
| uint32_t seg_start_addr_hi; |
| uint32_t seg_length; |
| uint32_t dst_addr_lo; |
| uint32_t dst_addr_hi; |
| }; |
| |
| /** |
| * struct fw_dump_req_param - firmware memory dump request details. |
| * @request_id - request id. |
| * @num_seg - requested number of segments. |
| * @fw_dump_seg_req - individual segment information. |
| * |
| * This structure carries information about the firmware |
| * memory dump request. |
| */ |
| struct fw_dump_req_param { |
| uint32_t request_id; |
| uint32_t num_seg; |
| struct fw_dump_seg_req_param segment[WMI_MAX_NUM_FW_SEGMENTS]; |
| }; |
| |
| #define WMI_TDLS_MAX_SUPP_CHANNELS 128 |
| #define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32 |
| #define WMI_2_4_GHZ_MAX_FREQ 3000 |
| |
| /** |
| * struct tdls_update_ch_params - channel parameters |
| * @chanId: ID of the channel |
| * @pwr: power level |
| * @dfsSet: is dfs supported or not |
| * @half_rate: is the channel operating at 10MHz |
| * @quarter_rate: is the channel operating at 5MHz |
| */ |
| struct tdls_update_ch_params { |
| uint8_t chanId; |
| uint8_t pwr; |
| bool dfsSet; |
| bool half_rate; |
| bool quarter_rate; |
| }; |
| |
| /** |
| * struct tdls_peer_cap_params - TDLS peer capablities parameters |
| * @isPeerResponder: is peer responder or not |
| * @peerUapsdQueue: peer uapsd queue |
| * @peerMaxSp: peer max SP value |
| * @peerBuffStaSupport: peer buffer sta supported or not |
| * @peerOffChanSupport: peer offchannel support |
| * @peerCurrOperClass: peer current operating class |
| * @selfCurrOperClass: self current operating class |
| * @peerChanLen: peer channel length |
| * @peerChan: peer channel list |
| * @peerOperClassLen: peer operating class length |
| * @peerOperClass: peer operating class |
| * @prefOffChanNum: peer offchannel number |
| * @prefOffChanBandwidth: peer offchannel bandwidth |
| * @opClassForPrefOffChan: operating class for offchannel |
| */ |
| struct tdls_peer_cap_params { |
| uint8_t isPeerResponder; |
| uint8_t peerUapsdQueue; |
| uint8_t peerMaxSp; |
| uint8_t peerBuffStaSupport; |
| uint8_t peerOffChanSupport; |
| uint8_t peerCurrOperClass; |
| uint8_t selfCurrOperClass; |
| uint8_t peerChanLen; |
| struct tdls_update_ch_params peerChan[WMI_TDLS_MAX_SUPP_CHANNELS]; |
| uint8_t peerOperClassLen; |
| uint8_t peerOperClass[WMI_TDLS_MAX_SUPP_OPER_CLASSES]; |
| uint8_t prefOffChanNum; |
| uint8_t prefOffChanBandwidth; |
| uint8_t opClassForPrefOffChan; |
| }; |
| |
| /** |
| * struct tdls_peer_state_params - TDLS peer state parameters |
| * @vdevId: vdev id |
| * @peerMacAddr: peer mac address |
| * @peerCap: peer capabality |
| */ |
| struct tdls_peer_state_params { |
| uint32_t vdevId; |
| uint8_t peerMacAddr[IEEE80211_ADDR_LEN]; |
| uint32_t peerState; |
| struct tdls_peer_cap_params peerCap; |
| }; |
| |
| /** |
| * struct wmi_tdls_params - TDLS parameters |
| * @vdev_id: vdev id |
| * @tdls_state: TDLS state |
| * @notification_interval_ms: notification inerval |
| * @tx_discovery_threshold: tx discovery threshold |
| * @tx_teardown_threshold: tx teardown threashold |
| * @rssi_teardown_threshold: RSSI teardown threshold |
| * @rssi_delta: RSSI delta |
| * @tdls_options: TDLS options |
| * @peer_traffic_ind_window: raffic indication window |
| * @peer_traffic_response_timeout: traffic response timeout |
| * @puapsd_mask: uapsd mask |
| * @puapsd_inactivity_time: uapsd inactivity time |
| * @puapsd_rx_frame_threshold: uapsd rx frame threshold |
| * @teardown_notification_ms: tdls teardown notification interval |
| * @tdls_peer_kickout_threshold: tdls packet threshold for |
| * peer kickout operation |
| */ |
| struct wmi_tdls_params { |
| uint32_t vdev_id; |
| uint32_t tdls_state; |
| uint32_t notification_interval_ms; |
| uint32_t tx_discovery_threshold; |
| uint32_t tx_teardown_threshold; |
| int32_t rssi_teardown_threshold; |
| int32_t rssi_delta; |
| uint32_t tdls_options; |
| uint32_t peer_traffic_ind_window; |
| uint32_t peer_traffic_response_timeout; |
| uint32_t puapsd_mask; |
| uint32_t puapsd_inactivity_time; |
| uint32_t puapsd_rx_frame_threshold; |
| uint32_t teardown_notification_ms; |
| uint32_t tdls_peer_kickout_threshold; |
| }; |
| |
| #ifndef CONVERGED_TDLS_ENABLE |
| /** |
| * struct tdls_chan_switch_params - channel switch parameter structure |
| * @vdev_id: vdev ID |
| * @peer_mac_addr: Peer mac address |
| * @tdls_off_ch_bw_offset: Target off-channel bandwitdh offset |
| * @tdls_off_ch: Target Off Channel |
| * @oper_class: Operating class for target channel |
| * @is_responder: Responder or initiator |
| */ |
| struct tdls_channel_switch_params { |
| uint32_t vdev_id; |
| uint8_t peer_mac_addr[IEEE80211_ADDR_LEN]; |
| uint16_t tdls_off_ch_bw_offset; |
| uint8_t tdls_off_ch; |
| uint8_t tdls_sw_mode; |
| uint8_t oper_class; |
| uint8_t is_responder; |
| }; |
| #endif |
| |
| /** |
| * struct dhcp_offload_info_params - dhcp offload parameters |
| * @vdev_id: request data length |
| * @dhcp_offload_enabled: dhcp offload enabled |
| * @dhcp_client_num: dhcp client no |
| * @dhcp_srv_addr: dhcp server ip |
| */ |
| struct dhcp_offload_info_params { |
| uint32_t vdev_id; |
| bool dhcp_offload_enabled; |
| uint32_t dhcp_client_num; |
| uint32_t dhcp_srv_addr; |
| }; |
| |
| /** |
| * struct nan_req_params - NAN request params |
| * @request_data_len: request data length |
| * @request_data: request data |
| */ |
| struct nan_req_params { |
| uint16_t request_data_len; |
| uint8_t request_data[]; |
| }; |
| |
| |
| /** |
| * struct app_type2_params - app type2parameter |
| * @vdev_id: vdev id |
| * @rc4_key: rc4 key |
| * @rc4_key_len: rc4 key length |
| * @ip_id: NC id |
| * @ip_device_ip: NC IP addres |
| * @ip_server_ip: Push server IP address |
| * @tcp_src_port: NC TCP port |
| * @tcp_dst_port: Push server TCP port |
| * @tcp_seq: tcp sequence |
| * @tcp_ack_seq: tcp ack sequence |
| * @keepalive_init: Initial ping interval |
| * @keepalive_min: Minimum ping interval |
| * @keepalive_max: Maximum ping interval |
| * @keepalive_inc: Increment of ping interval |
| * @gateway_mac: gateway mac address |
| * @tcp_tx_timeout_val: tcp tx timeout value |
| * @tcp_rx_timeout_val: tcp rx timeout value |
| */ |
| struct app_type2_params { |
| uint8_t vdev_id; |
| uint8_t rc4_key[16]; |
| uint32_t rc4_key_len; |
| /** ip header parameter */ |
| uint32_t ip_id; |
| uint32_t ip_device_ip; |
| uint32_t ip_server_ip; |
| /** tcp header parameter */ |
| uint16_t tcp_src_port; |
| uint16_t tcp_dst_port; |
| uint32_t tcp_seq; |
| uint32_t tcp_ack_seq; |
| uint32_t keepalive_init; |
| uint32_t keepalive_min; |
| uint32_t keepalive_max; |
| uint32_t keepalive_inc; |
| struct qdf_mac_addr gateway_mac; |
| uint32_t tcp_tx_timeout_val; |
| uint32_t tcp_rx_timeout_val; |
| }; |
| |
| /** |
| * struct app_type1_params - app type1 parameter |
| * @vdev_id: vdev id |
| * @wakee_mac_addr: mac address |
| * @identification_id: identification id |
| * @password: password |
| * @id_length: id length |
| * @pass_length: password length |
| */ |
| struct app_type1_params { |
| uint8_t vdev_id; |
| struct qdf_mac_addr wakee_mac_addr; |
| uint8_t identification_id[8]; |
| uint8_t password[16]; |
| uint32_t id_length; |
| uint32_t pass_length; |
| }; |
| |
| /** |
| * enum wmi_ext_wow_type - wow type |
| * @WMI_EXT_WOW_TYPE_APP_TYPE1: only enable wakeup for app type1 |
| * @WMI_EXT_WOW_TYPE_APP_TYPE2: only enable wakeup for app type2 |
| * @WMI_EXT_WOW_TYPE_APP_TYPE1_2: enable wakeup for app type1&2 |
| */ |
| enum wmi_ext_wow_type { |
| WMI_EXT_WOW_TYPE_APP_TYPE1, |
| WMI_EXT_WOW_TYPE_APP_TYPE2, |
| WMI_EXT_WOW_TYPE_APP_TYPE1_2, |
| }; |
| |
| /** |
| * struct ext_wow_params - ext wow parameters |
| * @vdev_id: vdev id |
| * @type: wow type |
| * @wakeup_pin_num: wake up gpio no |
| */ |
| struct ext_wow_params { |
| uint8_t vdev_id; |
| enum wmi_ext_wow_type type; |
| uint32_t wakeup_pin_num; |
| }; |
| |
| /** |
| * struct stats_ext_params - ext stats request |
| * @vdev_id: vdev id |
| * @request_data_len: request data length |
| * @request_data: request data |
| */ |
| struct stats_ext_params { |
| uint32_t vdev_id; |
| uint32_t request_data_len; |
| uint8_t request_data[]; |
| }; |
| |
| #define WMI_PERIODIC_TX_PTRN_MAX_SIZE 1536 |
| /** |
| * struct periodic_tx_pattern - periodic tx pattern |
| * @mac_address: MAC Address for the adapter |
| * @ucPtrnId: Pattern ID |
| * @ucPtrnSize: Pattern size |
| * @usPtrnIntervalMs: in ms |
| * @ucPattern: Pattern buffer |
| */ |
| struct periodic_tx_pattern { |
| struct qdf_mac_addr mac_address; |
| uint8_t ucPtrnId; |
| uint16_t ucPtrnSize; |
| uint32_t usPtrnIntervalMs; |
| uint8_t ucPattern[WMI_PERIODIC_TX_PTRN_MAX_SIZE]; |
| }; |
| |
| #define WMI_GTK_OFFLOAD_KEK_BYTES 64 |
| #define WMI_GTK_OFFLOAD_KCK_BYTES 16 |
| #define WMI_GTK_OFFLOAD_ENABLE 0 |
| #define WMI_GTK_OFFLOAD_DISABLE 1 |
| |
| /** |
| * struct flashing_req_params - led flashing parameter |
| * @reqId: request id |
| * @pattern_id: pattern identifier. 0: disconnected 1: connected |
| * @led_x0: led flashing parameter0 |
| * @led_x1: led flashing parameter1 |
| */ |
| struct flashing_req_params { |
| uint32_t req_id; |
| uint32_t pattern_id; |
| uint32_t led_x0; |
| uint32_t led_x1; |
| }; |
| |
| #define MAX_MEM_CHUNKS 32 |
| /** |
| * struct wmi_host_mem_chunk - host memory chunk structure |
| * @vaddr: Pointer to virtual address |
| * @paddr: Physical address |
| * @memctx: qdf memory context for mapped address. |
| * @len: length of chunk |
| * @req_id: request id from target |
| */ |
| struct wmi_host_mem_chunk { |
| uint32_t *vaddr; |
| uint32_t paddr; |
| qdf_dma_mem_context(memctx); |
| uint32_t len; |
| uint32_t req_id; |
| }; |
| |
| /** |
| * struct target_resource_config - Resource config given to target |
| * This structure is union of wmi_resource_config defined |
| * by both TLV and non-TLV target. |
| */ |
| struct target_resource_config { |
| uint32_t num_vdevs; |
| uint32_t num_peers; |
| uint32_t num_active_peers; |
| uint32_t num_offload_peers; |
| uint32_t num_offload_reorder_buffs; |
| uint32_t num_peer_keys; |
| uint32_t num_tids; |
| uint32_t ast_skid_limit; |
| uint32_t tx_chain_mask; |
| uint32_t rx_chain_mask; |
| uint32_t rx_timeout_pri[4]; |
| uint32_t rx_decap_mode; |
| uint32_t scan_max_pending_req; |
| uint32_t bmiss_offload_max_vdev; |
| uint32_t roam_offload_max_vdev; |
| uint32_t roam_offload_max_ap_profiles; |
| uint32_t num_mcast_groups; |
| uint32_t num_mcast_table_elems; |
| uint32_t mcast2ucast_mode; |
| uint32_t tx_dbg_log_size; |
| uint32_t num_wds_entries; |
| uint32_t dma_burst_size; |
| uint32_t mac_aggr_delim; |
| uint32_t rx_skip_defrag_timeout_dup_detection_check; |
| uint32_t vow_config; |
| uint32_t gtk_offload_max_vdev; |
| uint32_t num_msdu_desc; /* Number of msdu desc */ |
| uint32_t max_frag_entries; |
| /* End common */ |
| |
| /* Added in MCL */ |
| uint32_t num_tdls_vdevs; |
| uint32_t num_tdls_conn_table_entries; |
| uint32_t beacon_tx_offload_max_vdev; |
| uint32_t num_multicast_filter_entries; |
| uint32_t num_wow_filters; |
| uint32_t num_keep_alive_pattern; |
| uint32_t keep_alive_pattern_size; |
| uint32_t max_tdls_concurrent_sleep_sta; |
| uint32_t max_tdls_concurrent_buffer_sta; |
| uint32_t wmi_send_separate; |
| uint32_t num_ocb_vdevs; |
| uint32_t num_ocb_channels; |
| uint32_t num_ocb_schedules; |
| }; |
| |
| /** |
| * struct wmi_wifi_start_log - Structure to store the params sent to start/ |
| * stop logging |
| * @name: Attribute which indicates the type of logging like per packet |
| * statistics, connectivity etc. |
| * @verbose_level: Verbose level which can be 0,1,2,3 |
| * @flag: Flag field for future use |
| */ |
| struct wmi_wifi_start_log { |
| uint32_t ring_id; |
| uint32_t verbose_level; |
| uint32_t flag; |
| }; |
| |
| /** |
| * struct wmi_pcl_list - Format of PCL |
| * @pcl_list: List of preferred channels |
| * @weight_list: Weights of the PCL |
| * @pcl_len: Number of channels in the PCL |
| */ |
| struct wmi_pcl_list { |
| uint8_t pcl_list[128]; |
| uint8_t weight_list[128]; |
| uint32_t pcl_len; |
| }; |
| |
| /** |
| * struct wmi_pcl_chan_weights - Params to get the valid weighed list |
| * @pcl_list: Preferred channel list already sorted in the order of preference |
| * @pcl_len: Length of the PCL |
| * @saved_chan_list: Valid channel list updated as part of |
| * WMA_UPDATE_CHAN_LIST_REQ |
| * @saved_num_chan: Length of the valid channel list |
| * @weighed_valid_list: Weights of the valid channel list. This will have one |
| * to one mapping with valid_chan_list. FW expects channel order and size to be |
| * as per the list provided in WMI_SCAN_CHAN_LIST_CMDID. |
| * @weight_list: Weights assigned by policy manager |
| */ |
| struct wmi_pcl_chan_weights { |
| uint8_t pcl_list[MAX_NUM_CHAN]; |
| uint32_t pcl_len; |
| uint8_t saved_chan_list[MAX_NUM_CHAN]; |
| uint32_t saved_num_chan; |
| uint8_t weighed_valid_list[MAX_NUM_CHAN]; |
| uint8_t weight_list[MAX_NUM_CHAN]; |
| }; |
| |
| /** |
| * struct wmi_hw_mode_params - HW mode params |
| * @mac0_tx_ss: MAC0 Tx spatial stream |
| * @mac0_rx_ss: MAC0 Rx spatial stream |
| * @mac1_tx_ss: MAC1 Tx spatial stream |
| * @mac1_rx_ss: MAC1 Rx spatial stream |
| * @mac0_bw: MAC0 bandwidth |
| * @mac1_bw: MAC1 bandwidth |
| * @dbs_cap: DBS capabality |
| * @agile_dfs_cap: Agile DFS capabality |
| */ |
| struct wmi_hw_mode_params { |
| uint8_t mac0_tx_ss; |
| uint8_t mac0_rx_ss; |
| uint8_t mac1_tx_ss; |
| uint8_t mac1_rx_ss; |
| uint8_t mac0_bw; |
| uint8_t mac1_bw; |
| uint8_t dbs_cap; |
| uint8_t agile_dfs_cap; |
| }; |
| |
| /** |
| * struct wmi_dual_mac_config - Dual MAC configuration |
| * @scan_config: Scan configuration |
| * @fw_mode_config: FW mode configuration |
| * @set_dual_mac_cb: Callback function to be executed on response to the command |
| */ |
| struct wmi_dual_mac_config { |
| uint32_t scan_config; |
| uint32_t fw_mode_config; |
| void *set_dual_mac_cb; |
| }; |
| |
| /** |
| * struct ssid_hotlist_param - param for SSID Hotlist |
| * @ssid: SSID which is being hotlisted |
| * @band: Band in which the given SSID should be scanned |
| * @rssi_low: Low bound on RSSI |
| * @rssi_high: High bound on RSSI |
| */ |
| struct ssid_hotlist_param { |
| struct mac_ssid ssid; |
| uint8_t band; |
| int32_t rssi_low; |
| int32_t rssi_high; |
| }; |
| |
| /** |
| * struct rssi_disallow_bssid - Structure holding Rssi based avoid candidate |
| * @bssid: BSSID of the AP |
| * @remaining_duration: remaining disallow duration in ms |
| * @expected_rssi: RSSI at which STA can initate in dBm |
| */ |
| struct rssi_disallow_bssid { |
| struct qdf_mac_addr bssid; |
| uint32_t remaining_duration; |
| int8_t expected_rssi; |
| }; |
| |
| |
| /** |
| * struct roam_scan_filter_params - Structure holding roaming scan |
| * parameters |
| * @op_bitmap: bitmap to determine reason of roaming |
| * @session_id: vdev id |
| * @num_bssid_black_list: The number of BSSID's that we should |
| * avoid connecting to. It is like a |
| * blacklist of BSSID's. |
| * @num_ssid_white_list: The number of SSID profiles that are |
| * in the Whitelist. When roaming, we |
| * consider the BSSID's with this SSID |
| * also for roaming apart from the connected one's |
| * @num_bssid_preferred_list: Number of BSSID's which have a preference over |
| * others |
| * @bssid_avoid_list: Blacklist SSID's |
| * @ssid_allowed_list: Whitelist SSID's |
| * @bssid_favored: Favorable BSSID's |
| * @bssid_favored_factor: RSSI to be added to this BSSID to prefer it |
| * @lca_disallow_config_present: LCA [Last Connected AP] disallow config present |
| * @disallow_duration: How long LCA AP will be disallowed before it |
| * can be a roaming candidate again, in seconds |
| * @rssi_channel_penalization:How much RSSI will be penalized if candidate(s) |
| * are found in the same channel as disallowed AP's, |
| * in units of db |
| * @num_disallowed_aps: How many APs the target should maintain in its |
| * LCA list |
| * |
| * This structure holds all the key parameters related to |
| * initial connection and roaming connections. |
| */ |
| |
| struct roam_scan_filter_params { |
| uint32_t op_bitmap; |
| uint8_t session_id; |
| uint32_t num_bssid_black_list; |
| uint32_t num_ssid_white_list; |
| uint32_t num_bssid_preferred_list; |
| struct qdf_mac_addr bssid_avoid_list[MAX_BSSID_AVOID_LIST]; |
| struct mac_ssid ssid_allowed_list[MAX_SSID_ALLOWED_LIST]; |
| struct qdf_mac_addr bssid_favored[MAX_BSSID_FAVORED]; |
| uint8_t bssid_favored_factor[MAX_BSSID_FAVORED]; |
| uint8_t lca_disallow_config_present; |
| uint32_t disallow_duration; |
| uint32_t rssi_channel_penalization; |
| uint32_t num_disallowed_aps; |
| uint32_t num_rssi_rejection_ap; |
| struct rssi_disallow_bssid rssi_rejection_ap[MAX_RSSI_AVOID_BSSID_LIST]; |
| }; |
| |
| #define WMI_MAX_HLP_IE_LEN 2048 |
| /** |
| * struct hlp_params - HLP info params |
| * @vdev_id: vdev id |
| * @hlp_ie_len: HLP IE length |
| * @hlp_ie: HLP IE |
| */ |
| struct hlp_params { |
| uint8_t vdev_id; |
| uint32_t hlp_ie_len; |
| uint8_t hlp_ie[WMI_MAX_HLP_IE_LEN]; |
| }; |
| |
| #define WMI_UNIFIED_MAX_PMKID_LEN 16 |
| #define WMI_UNIFIED_MAX_PMK_LEN 64 |
| |
| /** |
| * struct wmi_unified_pmk_cache - used to set del pmkid cache |
| * @tlv_header: TLV header, TLV tag and len; tag equals WMITLV_TAG_ARRAY_UINT32 |
| * @pmk_len: PMK len |
| * for big-endian hosts, manual endian conversion will be needed to keep |
| * the array values in their original order in spite of the automatic |
| * byte-swap applied to WMI messages during download |
| * @pmk: PMK array |
| * @pmkid_len: PMK ID Len |
| * @pmkid: PMK ID Array |
| * @bssid: BSSID |
| * @ssid: SSID |
| * @cache_id: PMK Cache ID |
| * @cat_flag: whether (bssid) or (ssid,cache_id) is valid |
| * @action_flag: add/delete the entry |
| */ |
| struct wmi_unified_pmk_cache { |
| A_UINT32 tlv_header; |
| A_UINT32 pmk_len; |
| A_UINT8 session_id; |
| A_UINT8 pmk[WMI_UNIFIED_MAX_PMK_LEN]; |
| A_UINT32 pmkid_len; |
| A_UINT8 pmkid[WMI_UNIFIED_MAX_PMKID_LEN]; |
| wmi_host_mac_addr bssid; |
| struct mac_ssid ssid; |
| A_UINT32 cache_id; |
| A_UINT32 cat_flag; |
| A_UINT32 action_flag; |
| }; |
| |
| |
| /** |
| * struct ssid_hotlist_request_params - set SSID hotlist request struct |
| * @request_id: ID of the request |
| * @session_id: ID of the session |
| * @lost_ssid_sample_size: Number of consecutive scans in which the SSID |
| * must not be seen in order to consider the SSID "lost" |
| * @ssid_count: Number of valid entries in the @ssids array |
| * @ssids: Array that defines the SSIDs that are in the hotlist |
| */ |
| struct ssid_hotlist_request_params { |
| uint32_t request_id; |
| uint8_t session_id; |
| uint32_t lost_ssid_sample_size; |
| uint32_t ssid_count; |
| struct ssid_hotlist_param ssids[WMI_EXTSCAN_MAX_HOTLIST_SSIDS]; |
| }; |
| |
| /** |
| * struct wmi_unit_test_cmd - unit test command parameters |
| * @vdev_id: vdev id |
| * @module_id: module id |
| * @num_args: number of arguments |
| * @diag_token: dialog token, which identifies the transaction. |
| * this number is generated by wifitool and may be used to |
| * identify the transaction in the event path |
| * @args: arguments |
| */ |
| struct wmi_unit_test_cmd { |
| uint32_t vdev_id; |
| uint32_t module_id; |
| uint32_t num_args; |
| uint32_t diag_token; |
| uint32_t args[WMI_MAX_NUM_ARGS]; |
| }; |
| |
| /** |
| * struct wmi_roam_invoke_cmd - roam invoke command |
| * @vdev_id: vdev id |
| * @bssid: mac address |
| * @channel: channel |
| * @frame_len: frame length, includs mac header, fixed params and ies |
| * @frame_buf: buffer contaning probe response or beacon |
| * @is_same_bssid: flag to indicate if roaming is requested for same bssid |
| */ |
| struct wmi_roam_invoke_cmd { |
| uint32_t vdev_id; |
| uint8_t bssid[IEEE80211_ADDR_LEN]; |
| uint32_t channel; |
| uint32_t frame_len; |
| uint8_t *frame_buf; |
| uint8_t is_same_bssid; |
| }; |
| |
| /** |
| * struct ext_scan_setbssi_hotlist_params - set hotlist request |
| * @requestId: request identifier |
| * @sessionId: session identifier |
| * @lost_ap_sample_size: number of samples to confirm AP loss |
| * @numAp: Number of hotlist APs |
| * @ap: hotlist APs |
| */ |
| struct ext_scan_setbssi_hotlist_params { |
| uint32_t requestId; |
| uint8_t sessionId; |
| |
| uint32_t lost_ap_sample_size; |
| uint32_t numAp; |
| struct ap_threshold_params ap[WMI_WLAN_EXTSCAN_MAX_HOTLIST_APS]; |
| }; |
| |
| /** |
| * struct host_mem_req - Host memory request paramseters request by target |
| * @req_id: Request id to identify the request. |
| * @unit_size: Size of single unit requested. |
| * @num_unit_info: Memory chunk info |
| * @num_units: number of units requested. |
| */ |
| typedef struct { |
| uint32_t req_id; |
| uint32_t unit_size; |
| uint32_t num_unit_info; |
| uint32_t num_units; |
| } host_mem_req; |
| |
| #define WMI_HOST_DSCP_MAP_MAX (64) |
| |
| /** |
| * struct wmi_host_ext_resource_config - Extended resource config |
| * @host_platform_config: Host plaform configuration. |
| * @fw_featuew_bitmap: FW feature requested bitmap. |
| */ |
| typedef struct { |
| uint32_t host_platform_config; |
| |
| #define WMI_HOST_FW_FEATURE_LTEU_SUPPORT 0x0001 |
| #define WMI_HOST_FW_FEATURE_COEX_GPIO_SUPPORT 0x0002 |
| #define WMI_HOST_FW_FEATURE_AUX_RADIO_SPECTRAL_INTF 0x0004 |
| #define WMI_HOST_FW_FEATURE_AUX_RADIO_CHAN_LOAD_INTF 0x0008 |
| #define WMI_HOST_FW_FEATURE_BSS_CHANNEL_INFO_64 0x0010 |
| #define WMI_HOST_FW_FEATURE_PEER_STATS 0x0020 |
| #define WMI_HOST_FW_FEATURE_VDEV_STATS 0x0040 |
| /** |
| * @brief fw_feature_bitmask - Enable/Disable features in FW |
| * @details |
| * The bits in fw_feature_bitmask are used as shown by the masks below: |
| * 0x0001 - LTEU Config enable/disable |
| * 0x0002 - COEX GPIO Config enable/disable |
| * 0x0004 - Aux Radio enhancement for spectral scan enable/disable |
| * 0x0008 - Aux Radio enhancement for chan load scan enable/disable |
| * 0x0010 - BSS channel info stats enable/disable |
| * The features in question are enabled by setting |
| * the feature's bit to 1, |
| * or disabled by setting the feature's bit to 0. |
| */ |
| uint32_t fw_feature_bitmap; |
| |
| /* WLAN priority GPIO number |
| * The target uses a GPIO pin to indicate when it is transmitting |
| * high-priority traffic (e.g. beacon, management, or AC_VI) or |
| * low-priority traffic (e.g. AC_BE, AC_BK). The HW uses this |
| * WLAN GPIO pin to determine whether to abort WLAN tx in favor of |
| * BT activity. |
| * Which GPIO is used for this WLAN tx traffic priority specification |
| * varies between platforms, so the host needs to indicate to the |
| * target which GPIO to use. |
| */ |
| uint32_t wlan_priority_gpio; |
| |
| /* Host will notify target which coex algorithm has to be |
| * enabled based on HW, FW capability and device tree config. |
| * Till now the coex algorithms were target specific. Now the |
| * same target can choose between multiple coex algorithms |
| * depending on device tree config on host. For backward |
| * compatibility, version support will have option 0 and will |
| * rely on FW compile time flags to decide the coex version |
| * between VERSION_1, VERSION_2 and VERSION_3. Version info is |
| * mandatory from VERSION_4 onwards for any new coex algorithms. |
| * |
| * 0 = no version support |
| * 1 = COEX_VERSION_1 (3 wire coex) |
| * 2 = COEX_VERSION_2 (2.5 wire coex) |
| * 3 = COEX_VERSION_3 (2.5 wire coex+duty cycle) |
| * 4 = COEX_VERSION_4 (4 wire coex) |
| */ |
| uint32_t coex_version; |
| |
| /* There are multiple coex implementations on FW to support different |
| * hardwares. Since the coex algos are mutually exclusive, host will |
| * use below fields to send GPIO info to FW and these GPIO pins will |
| * have different usages depending on the feature enabled. This is to |
| * avoid adding multiple GPIO fields here for different features. |
| * |
| * COEX VERSION_4 (4 wire coex) : |
| * 4 wire coex feature uses 1 common input request line from BT/ZB/ |
| * Thread which interrupts the WLAN target processor directly, 1 input |
| * priority line from BT and ZB each, 1 output line to grant access to |
| * requesting IOT subsystem. WLAN uses the input priority line to |
| * identify the requesting IOT subsystem. Request is granted based on |
| * IOT interface priority and WLAN traffic. GPIO pin usage is as below: |
| * coex_gpio_pin_1 = BT PRIORITY INPUT GPIO |
| * coex_gpio_pin_2 = ZIGBEE PRIORITY INPUT GPIO |
| * coex_gpio_pin_3 = GRANT OUTPUT GPIO |
| * when a BT active interrupt is raised, WLAN reads |
| * BT and ZB priority input GPIO pins to compare against the coex |
| * priority table and accordingly sets the grant output GPIO to give |
| * access to requesting IOT subsystem. |
| */ |
| uint32_t coex_gpio_pin_1; |
| uint32_t coex_gpio_pin_2; |
| uint32_t coex_gpio_pin_3; |
| |
| /* add new members here */ |
| } wmi_host_ext_resource_config; |
| |
| /** |
| * struct set_neighbour_rx_params - Neighbour RX params |
| * @vdev_id: vdev id |
| * @idx: index of param |
| * @action: action |
| * @type: Type of param |
| */ |
| struct set_neighbour_rx_params { |
| uint8_t vdev_id; |
| uint32_t idx; |
| uint32_t action; |
| uint32_t type; |
| }; |
| |
| /** |
| * struct set_fwtest_params - FW test params |
| * @arg: FW param id |
| * @value: value |
| */ |
| struct set_fwtest_params { |
| uint32_t arg; |
| uint32_t value; |
| }; |
| |
| /** |
| * struct set_custom_aggr_size_params - custom aggr size params |
| * @vdev_id : vdev id |
| * @tx_aggr_size : TX aggr size |
| * @rx_aggr_size : RX aggr size |
| * @enable_bitmap: Bitmap for aggr size check |
| */ |
| struct set_custom_aggr_size_params { |
| uint32_t vdev_id; |
| uint32_t tx_aggr_size; |
| uint32_t rx_aggr_size; |
| uint32_t ac:2, |
| aggr_type:1, |
| tx_aggr_size_disable:1, |
| rx_aggr_size_disable:1, |
| tx_ac_enable:1, |
| reserved:26; |
| }; |
| |
| /** |
| * enum wmi_host_custom_aggr_type_t: custon aggregate type |
| * @WMI_HOST_CUSTOM_AGGR_TYPE_AMPDU: A-MPDU aggregation |
| * @WMI_HOST_CUSTOM_AGGR_TYPE_AMSDU: A-MSDU aggregation |
| * @WMI_HOST_CUSTOM_AGGR_TYPE_MAX: Max type |
| */ |
| enum wmi_host_custom_aggr_type_t { |
| WMI_HOST_CUSTOM_AGGR_TYPE_AMPDU = 0, |
| WMI_HOST_CUSTOM_AGGR_TYPE_AMSDU = 1, |
| WMI_HOST_CUSTOM_AGGR_TYPE_MAX, |
| }; |
| |
| /* |
| * msduq_update_params - MSDUQ update param structure |
| * @tid_num: TID number |
| * @msduq_update_mask: update bit mask |
| * @qdepth_thresh_value: threshold value for the queue depth |
| */ |
| |
| #define QDEPTH_THRESH_MAX_UPDATES 1 |
| |
| typedef struct { |
| uint32_t tid_num; |
| uint32_t msduq_update_mask; |
| uint32_t qdepth_thresh_value; |
| } msduq_update_params; |
| |
| /** |
| * struct set_qdepth_thresh_params - MSDU Queue Depth Threshold Params |
| * @vdev_id: vdev id |
| * @pdev_id: pdev id |
| * @mac_addr: MAC address |
| * @num_of_msduq_updates: holds the number of tid updates |
| */ |
| |
| struct set_qdepth_thresh_params { |
| uint32_t pdev_id; |
| uint32_t vdev_id; |
| uint8_t mac_addr[IEEE80211_ADDR_LEN]; |
| uint32_t num_of_msduq_updates; |
| msduq_update_params update_params[QDEPTH_THRESH_MAX_UPDATES]; |
| }; |
| |
| |
| |
| /** |
| * struct config_ratemask_params - ratemask config parameters |
| * @vdev_id: vdev id |
| * @type: Type |
| * @lower32: Lower 32 bits |
| * @higher32: Hogher 32 bits |
| */ |
| struct config_ratemask_params { |
| uint8_t vdev_id; |
| uint8_t type; |
| uint32_t lower32; |
| uint32_t higher32; |
| }; |
| |
| /** |
| * struct config_fils_params - FILS config params |
| * @vdev_id: vdev id |
| * @fd_period: 0 - Disabled, non-zero - Period in ms (mili seconds) |
| */ |
| struct config_fils_params { |
| uint8_t vdev_id; |
| uint32_t fd_period; |
| }; |
| |
| /** |
| * struct peer_add_wds_entry_params - WDS peer entry add params |
| * @dest_addr: Pointer to destination macaddr |
| * @peer_addr: Pointer to peer mac addr |
| * @flags: flags |
| * @vdev_id: Vdev id |
| */ |
| struct peer_add_wds_entry_params { |
| const uint8_t *dest_addr; |
| uint8_t *peer_addr; |
| uint32_t flags; |
| uint32_t vdev_id; |
| }; |
| |
| /** |
| * struct peer_del_wds_entry_params - WDS peer entry del params |
| * @dest_addr: Pointer to destination macaddr |
| * @vdev_id: Vdev id |
| */ |
| struct peer_del_wds_entry_params { |
| uint8_t *dest_addr; |
| uint32_t vdev_id; |
| }; |
| |
| /** |
| * struct set_bridge_mac_addr_params - set bridge MAC addr params |
| * @dest_addr: Pointer to bridge macaddr |
| */ |
| struct set_bridge_mac_addr_params { |
| uint8_t *bridge_addr; |
| }; |
| |
| /** |
| * struct peer_updatewds_entry_params - WDS peer entry update params |
| * @wds_macaddr: Pointer to destination macaddr |
| * @peer_add: Pointer to peer mac addr |
| * @flags: flags |
| * @vdev_id: Vdev id |
| */ |
| struct peer_update_wds_entry_params { |
| uint8_t *wds_macaddr; |
| uint8_t *peer_macaddr; |
| uint32_t flags; |
| uint32_t vdev_id; |
| }; |
| |
| /** |
| * struct set_ps_mode_params - PS mode params |
| * @vdev_id: vdev id |
| * @psmode: PS mode |
| */ |
| struct set_ps_mode_params { |
| uint8_t vdev_id; |
| uint8_t psmode; |
| }; |
| |
| /** |
| * @struct tt_level_config - Set Thermal throttlling config |
| * @tmplwm: Temperature low water mark |
| * @tmphwm: Temperature high water mark |
| * @dcoffpercent: dc off percentage |
| * @priority: priority |
| */ |
| typedef struct { |
| uint32_t tmplwm; |
| uint32_t tmphwm; |
| uint32_t dcoffpercent; |
| uint32_t priority; |
| } tt_level_config; |
| |
| /** |
| * struct thermal_mitigation_params - Thermal mitigation params |
| * @enable: Enable/Disable Thermal mitigation |
| * @dc: DC |
| * @dc_per_event: DC per event |
| * @tt_level_config: TT level config params |
| */ |
| struct thermal_mitigation_params { |
| uint32_t pdev_id; |
| uint32_t enable; |
| uint32_t dc; |
| uint32_t dc_per_event; |
| tt_level_config levelconf[THERMAL_LEVELS]; |
| }; |
| |
| /** |
| * struct smart_ant_enable_params - Smart antenna params |
| * @enable: Enable/Disable |
| * @mode: SA mode |
| * @rx_antenna: RX antenna config |
| * @gpio_pin : GPIO pin config |
| * @gpio_func : GPIO function config |
| */ |
| struct smart_ant_enable_params { |
| uint32_t enable; |
| uint32_t mode; |
| uint32_t rx_antenna; |
| uint32_t gpio_pin[WMI_HAL_MAX_SANTENNA]; |
| uint32_t gpio_func[WMI_HAL_MAX_SANTENNA]; |
| uint32_t pdev_id; |
| }; |
| |
| /** |
| * struct smart_ant_rx_ant_params - RX antenna params |
| * @antenna: RX antenna |
| */ |
| struct smart_ant_rx_ant_params { |
| uint32_t antenna; |
| uint32_t pdev_id; |
| }; |
| |
| /** |
| * struct smart_ant_tx_ant_params - TX antenna param |
| * @antenna_array: Antenna arry |
| * @vdev_id: VDEV id |
| */ |
| struct smart_ant_tx_ant_params { |
| uint32_t *antenna_array; |
| uint8_t vdev_id; |
| }; |
| |
| /** |
| * struct smart_ant_training_info_params - SA training params |
| * @vdev_id: VDEV id |
| * @rate_array: Rates array |
| * @antenna_array: Antenna array |
| * @numpkts: num packets for training |
| */ |
| struct smart_ant_training_info_params { |
| uint8_t vdev_id; |
| uint32_t *rate_array; |
| uint32_t *antenna_array; |
| uint32_t numpkts; |
| }; |
| |
| /** |
| * struct smart_ant_node_config_params - SA node config params |
| * @vdev_id: VDEV id |
| * @cmd_id: Command id |
| * @args_count: Arguments count |
| */ |
| struct smart_ant_node_config_params { |
| uint8_t vdev_id; |
| uint32_t cmd_id; |
| uint16_t args_count; |
| uint32_t *args_arr; |
| }; |
| /** |
| * struct smart_ant_enable_tx_feedback_params - SA tx feeback params |
| * @enable: Enable TX feedback for SA |
| */ |
| struct smart_ant_enable_tx_feedback_params { |
| int enable; |
| }; |
| |
| /** |
| * struct vdev_spectral_configure_params - SPectral config params |
| * @vdev_id: VDEV id |
| * @count: count |
| * @period: period |
| * @spectral_pri: Spectral priority |
| * @fft_size: FFT size |
| * @gc_enable: GC enable |
| * @restart_enable: restart enabled |
| * @noise_floor_ref: Noise floor reference |
| * @init_delay: Init delays |
| * @nb_tone_thr: NB tone threshold |
| * @str_bin_thr: STR BIN threshold |
| * @wb_rpt_mode: WB BIN threshold |
| * @rssi_rpt_mode: RSSI report mode |
| * @rssi_thr: RSSI threshold |
| * @pwr_format: Power format |
| * @rpt_mode: Report mdoe |
| * @bin_scale: BIN scale |
| * @dBm_adj: DBM adjust |
| * @chn_mask: chain mask |
| */ |
| struct vdev_spectral_configure_params { |
| uint8_t vdev_id; |
| uint16_t count; |
| uint16_t period; |
| uint16_t spectral_pri; |
| uint16_t fft_size; |
| uint16_t gc_enable; |
| uint16_t restart_enable; |
| uint16_t noise_floor_ref; |
| uint16_t init_delay; |
| uint16_t nb_tone_thr; |
| uint16_t str_bin_thr; |
| uint16_t wb_rpt_mode; |
| uint16_t rssi_rpt_mode; |
| uint16_t rssi_thr; |
| uint16_t pwr_format; |
| uint16_t rpt_mode; |
| uint16_t bin_scale; |
| uint16_t dBm_adj; |
| uint16_t chn_mask; |
| }; |
| |
| /** |
| * struct vdev_spectral_enable_params - Spectral enabled params |
| * @vdev_id: VDEV id |
| * @active_valid: Active valid |
| * @active: active |
| * @enabled_valid: Enabled valid |
| * @enabled: enabled |
| */ |
| struct vdev_spectral_enable_params { |
| uint8_t vdev_id; |
| uint8_t active_valid; |
| uint8_t active; |
| uint8_t enabled_valid; |
| uint8_t enabled; |
| }; |
| |
| /** |
| * struct pdev_set_regdomain_params - PDEV set reg domain params |
| * @currentRDinuse: Current Reg domain |
| * @currentRD2G: Current Reg domain 2G |
| * @currentRD5G: Current Reg domain 5G |
| * @ctl_2G: CTL 2G |
| * @ctl_5G: CTL 5G |
| * @dfsDomain: DFS domain |
| * @pdev_id: pdev_id |
| */ |
| struct pdev_set_regdomain_params { |
| uint16_t currentRDinuse; |
| uint16_t currentRD2G; |
| uint16_t currentRD5G; |
| uint32_t ctl_2G; |
| uint32_t ctl_5G; |
| uint8_t dfsDomain; |
| uint32_t pdev_id; |
| }; |
| |
| /** |
| * struct set_quiet_mode_params - Set quiet mode params |
| * @enabled: Enabled |
| * @period: Quite period |
| * @intval: Quite interval |
| * @duration: Quite duration |
| * @offset: offset |
| */ |
| struct set_quiet_mode_params { |
| uint8_t enabled; |
| uint8_t period; |
| uint16_t intval; |
| uint16_t duration; |
| uint16_t offset; |
| }; |
| |
| /** |
| * struct set_beacon_filter_params - Set beacon filter params |
| * @vdev_id: VDEV id |
| * @ie: Pointer to IE fields |
| */ |
| struct set_beacon_filter_params { |
| uint8_t vdev_id; |
| uint32_t *ie; |
| }; |
| |
| /** |
| * struct remove_beacon_filter_params - Remove beacon filter params |
| * @vdev_id: VDEV id |
| */ |
| struct remove_beacon_filter_params { |
| uint8_t vdev_id; |
| }; |
| |
| /** |
| * struct mgmt_params - Mgmt params |
| * @vdev_id: vdev id |
| * @buf_len: lenght of frame buffer |
| * @wbuf: frame buffer |
| */ |
| struct mgmt_params { |
| int vdev_id; |
| uint32_t buf_len; |
| qdf_nbuf_t wbuf; |
| }; |
| |
| /** |
| * struct addba_clearresponse_params - Addba clear response params |
| * @vdev_id: VDEV id |
| */ |
| struct addba_clearresponse_params { |
| uint8_t vdev_id; |
| }; |
| |
| /** |
| * struct addba_send_params - ADDBA send params |
| * @vdev_id: vdev id |
| * @tidno: TID |
| * @buffersize: buffer size |
| */ |
| struct addba_send_params { |
| uint8_t vdev_id; |
| uint8_t tidno; |
| uint16_t buffersize; |
| }; |
| |
| /** |
| * struct delba_send_params - DELBA send params |
| * @vdev_id: vdev id |
| * @tidno: TID |
| * @initiator: initiator |
| * @reasoncode: reason code |
| */ |
| struct delba_send_params { |
| uint8_t vdev_id; |
| uint8_t tidno; |
| uint8_t initiator; |
| uint16_t reasoncode; |
| }; |
| /** |
| * struct addba_setresponse_arams - Set ADDBA response params |
| * @vdev_id: vdev id |
| * @tidno: TID |
| * @statuscode: status code in response |
| */ |
| struct addba_setresponse_params { |
| uint8_t vdev_id; |
| uint8_t tidno; |
| uint16_t statuscode; |
| }; |
| |
| /** |
| * struct singleamsdu_params - Single AMSDU params |
| * @vdev_id: vdev is |
| * @tidno: TID |
| */ |
| struct singleamsdu_params { |
| uint8_t vdev_id; |
| uint8_t tidno; |
| }; |
| |
| /** |
| * struct set_qbosst_params - Set QBOOST params |
| * @vdev_id: vdev id |
| * @value: value |
| */ |
| struct set_qboost_params { |
| uint8_t vdev_id; |
| uint32_t value; |
| }; |
| |
| /** |
| * struct mu_scan_params - MU scan params |
| * @id: id |
| * @type: type |
| * @duration: Duration |
| * @lteu_tx_power: LTEU tx power |
| */ |
| struct mu_scan_params { |
| uint8_t id; |
| uint8_t type; |
| uint32_t duration; |
| uint32_t lteu_tx_power; |
| uint32_t rssi_thr_bssid; |
| uint32_t rssi_thr_sta; |
| uint32_t rssi_thr_sc; |
| uint32_t plmn_id; |
| uint32_t alpha_num_bssid; |
| }; |
| |
| /** |
| * struct lteu_config_params - LTEU config params |
| * @lteu_gpio_start: start MU/AP scan after GPIO toggle |
| * @lteu_num_bins: no. of elements in the following arrays |
| * @use_actual_nf: whether to use the actual NF obtained or a hardcoded one |
| * @lteu_weight: weights for MU algo |
| * @lteu_thresh: thresholds for MU algo |
| * @lteu_gamma: gamma's for MU algo |
| * @lteu_scan_timeout: timeout in ms to gpio toggle |
| * @alpha_num_ssid: alpha for num active bssid calculation |
| * @wifi_tx_power: Wifi Tx power |
| */ |
| struct lteu_config_params { |
| uint8_t lteu_gpio_start; |
| uint8_t lteu_num_bins; |
| uint8_t use_actual_nf; |
| uint32_t lteu_weight[LTEU_MAX_BINS]; |
| uint32_t lteu_thresh[LTEU_MAX_BINS]; |
| uint32_t lteu_gamma[LTEU_MAX_BINS]; |
| uint32_t lteu_scan_timeout; |
| uint32_t alpha_num_bssid; |
| uint32_t wifi_tx_power; |
| uint32_t allow_err_packets; |
| }; |
| |
| struct wmi_macaddr_t { |
| /** upper 4 bytes of MAC address */ |
| uint32_t mac_addr31to0; |
| /** lower 2 bytes of MAC address */ |
| uint32_t mac_addr47to32; |
| }; |
| |
| /** |
| * struct atf_peer_info - ATF peer info params |
| * @peer_macaddr: peer mac addr |
| * @percentage_peer: percentage of air time for this peer |
| * @vdev_id: Associated vdev id |
| * @pdev_id: Associated pdev id |
| */ |
| typedef struct { |
| struct wmi_macaddr_t peer_macaddr; |
| uint32_t percentage_peer; |
| uint32_t vdev_id; |
| uint32_t pdev_id; |
| } atf_peer_info; |
| |
| /** |
| * struct bwf_peer_info_t - BWF peer info params |
| * @peer_macaddr: peer mac addr |
| * @throughput: Throughput |
| * @max_airtime: Max airtime |
| * @priority: Priority level |
| * @reserved: Reserved array |
| * @vdev_id: Associated vdev id |
| * @pdev_id: Associated pdev id |
| */ |
| typedef struct { |
| struct wmi_macaddr_t peer_macaddr; |
| uint32_t throughput; |
| uint32_t max_airtime; |
| uint32_t priority; |
| uint32_t reserved[4]; |
| uint32_t vdev_id; |
| uint32_t pdev_id; |
| } bwf_peer_info; |
| |
| /** |
| * struct set_bwf_params - BWF params |
| * @num_peers: number of peers |
| * @atf_peer_info: BWF peer info |
| */ |
| struct set_bwf_params { |
| uint32_t num_peers; |
| bwf_peer_info peer_info[1]; |
| }; |
| |
| /** |
| * struct atf_peer_ext_info - ATF peer ext info params |
| * @peer_macaddr: peer mac address |
| * @group_index: group index |
| * @atf_index_reserved: ATF index rsvd |
| * @vdev_id: Associated vdev id |
| * @pdev_id: Associated pdev id |
| */ |
| typedef struct { |
| struct wmi_macaddr_t peer_macaddr; |
| uint32_t group_index; |
| uint32_t atf_index_reserved; |
| uint16_t vdev_id; |
| uint16_t pdev_id; |
| } atf_peer_ext_info; |
| |
| /** |
| * struct set_atf_params - ATF params |
| * @num_peers: number of peers |
| * @atf_peer_info: ATF peer info |
| */ |
| struct set_atf_params { |
| uint32_t num_peers; |
| atf_peer_info peer_info[ATF_ACTIVED_MAX_CLIENTS]; |
| }; |
| |
| /** |
| * struct atf_peer_request_params - ATF peer req params |
| * @num_peers: number of peers |
| * @atf_peer_ext_info: ATF peer ext info |
| */ |
| struct atf_peer_request_params { |
| uint32_t num_peers; |
| atf_peer_ext_info peer_ext_info[ATF_ACTIVED_MAX_CLIENTS]; |
| }; |
| |
| /** |
| * struct atf_group_info - ATF group info params |
| * @percentage_group: Percentage AT for group |
| * @atf_group_units_reserved: ATF group information |
| * @pdev_id: Associated pdev id |
| */ |
| typedef struct { |
| uint32_t percentage_group; |
| uint32_t atf_group_units_reserved; |
| uint32_t pdev_id; |
| } atf_group_info; |
| |
| /** |
| * struct atf_grouping_params - ATF grouping params |
| * @num_groups: number of groups |
| * @group_inf: Group informaition |
| */ |
| struct atf_grouping_params { |
| uint32_t num_groups; |
| atf_group_info group_info[ATF_ACTIVED_MAX_ATFGROUPS]; |
| }; |
| |
| /** |
| * struct wlan_profile_params - WLAN profile params |
| * @param_id: param id |
| * @profile_id: profile id |
| * @enable: enable |
| */ |
| struct wlan_profile_params { |
| uint32_t param_id; |
| uint32_t profile_id; |
| uint32_t enable; |
| }; |
| |
| /* struct ht_ie_params - HT IE params |
| * @ie_len: IE length |
| * @ie_data: pointer to IE data |
| * @tx_streams: Tx streams supported for this HT IE |
| * @rx_streams: Rx streams supported for this HT IE |
| */ |
| struct ht_ie_params { |
| uint32_t ie_len; |
| uint8_t *ie_data; |
| uint32_t tx_streams; |
| uint32_t rx_streams; |
| }; |
| |
| /* struct vht_ie_params - VHT IE params |
| * @ie_len: IE length |
| * @ie_data: pointer to IE data |
| * @tx_streams: Tx streams supported for this VHT IE |
| * @rx_streams: Rx streams supported for this VHT IE |
| */ |
| struct vht_ie_params { |
| uint32_t ie_len; |
| uint8_t *ie_data; |
| uint32_t tx_streams; |
| uint32_t rx_streams; |
| }; |
| |
| /** |
| * struct wmi_host_wmeParams - WME params |
| * @wmep_acm: ACM paramete |
| * @wmep_aifsn: AIFSN parameters |
| * @wmep_logcwmin: cwmin in exponential form |
| * @wmep_logcwmax: cwmax in exponential form |
| * @wmep_txopLimit: txopLimit |
| * @wmep_noackPolicy: No-Ack Policy: 0=ack, 1=no-ack |
| */ |
| struct wmi_host_wmeParams { |
| u_int8_t wmep_acm; |
| u_int8_t wmep_aifsn; |
| u_int8_t wmep_logcwmin; |
| u_int8_t wmep_logcwmax; |
| u_int16_t wmep_txopLimit; |
| u_int8_t wmep_noackPolicy; |
| }; |
| |
| /** |
| * struct wmm_update_params - WMM update params |
| * @wmep_array: WME params for each AC |
| */ |
| struct wmm_update_params { |
| struct wmi_host_wmeParams *wmep_array; |
| }; |
| |
| /** |
| * struct wmi_host_wmevParams - WME params |
| * @wmep_acm: ACM paramete |
| * @wmep_aifsn: AIFSN parameters |
| * @wmep_logcwmin: cwmin in exponential form |
| * @wmep_logcwmax: cwmax in exponential form |
| * @wmep_txopLimit: txopLimit |
| * @wmep_noackPolicy: No-Ack Policy: 0=ack, 1=no-ack |
| */ |
| struct wmi_host_wme_vparams { |
| u_int32_t acm; |
| u_int32_t aifs; |
| u_int32_t cwmin; |
| u_int32_t cwmax; |
| union { |
| u_int32_t txoplimit; |
| u_int32_t mu_edca_timer; |
| }; |
| u_int32_t noackpolicy; |
| }; |
| |
| /** |
| * struct ant_switch_tbl_params - Antenna switch table params |
| * @ant_ctrl_common1: ANtenna control common param 1 |
| * @ant_ctrl_common2: Antenna control commn param 2 |
| */ |
| struct ant_switch_tbl_params { |
| uint32_t ant_ctrl_common1; |
| uint32_t ant_ctrl_common2; |
| uint32_t pdev_id; |
| uint32_t antCtrlChain; |
| }; |
| |
| /** |
| * struct ratepwr_table_params - Rate power table params |
| * @ratepwr_tbl: pointer to rate power table |
| * @ratepwr_len: rate power table len |
| */ |
| struct ratepwr_table_params { |
| uint8_t *ratepwr_tbl; |
| uint16_t ratepwr_len; |
| }; |
| |
| /** |
| * struct ctl_table_params - Ctl table params |
| * @ctl_array: pointer to ctl array |
| * @ctl_cmd_len: ctl command length |
| * @is_acfg_ctl: is acfg_ctl table |
| */ |
| struct ctl_table_params { |
| uint8_t *ctl_array; |
| uint16_t ctl_cmd_len; |
| uint32_t target_type; |
| bool is_2g; |
| uint32_t ctl_band; |
| uint32_t pdev_id; |
| }; |
| |
| /** |
| * struct mimogain_table_params - MIMO gain table params |
| * @array_gain: pointer to array gain table |
| * @tbl_len: table length |
| * @multichain_gain_bypass: bypass multichain gain |
| */ |
| struct mimogain_table_params { |
| uint8_t *array_gain; |
| uint16_t tbl_len; |
| bool multichain_gain_bypass; |
| uint32_t pdev_id; |
| }; |
| |
| /** |
| * struct ratepwr_chainmask_params - Rate power chainmask params |
| * @ratepwr_chain_tbl: pointer to ratepwr chain table |
| * @num_rate: number of rate in table |
| * @pream_type: preamble type |
| * @ops: ops |
| */ |
| struct ratepwr_chainmsk_params { |
| uint32_t *ratepwr_chain_tbl; |
| uint16_t num_rate; |
| uint8_t pream_type; |
| uint8_t ops; |
| }; |
| |
| struct macaddr_params { |
| uint8_t *macaddr; |
| }; |
| |
| /** |
| * struct acparams_params - acparams config structure |
| * @ac: AC to configure |
| * @use_rts: Use rts for this AC |
| * @aggrsize_scaling: Aggregrate size scaling for the AC |
| * @min_kbps: min kbps req |
| */ |
| struct acparams_params { |
| uint8_t ac; |
| uint8_t use_rts; |
| uint8_t aggrsize_scaling; |
| uint32_t min_kbps; |
| }; |
| |
| /** |
| * struct vap_dscp_tid_map_params - DSCP tid map params |
| * @vdev_id: vdev id |
| * @dscp_to_tid_map: pointer to arry of tid to dscp map table |
| */ |
| struct vap_dscp_tid_map_params { |
| uint8_t vdev_id; |
| uint32_t *dscp_to_tid_map; |
| }; |
| |
| /** |
| * struct proxy_ast_reserve_params - Proxy AST reserve params |
| * @macaddr: macaddr for proxy ast entry |
| */ |
| struct proxy_ast_reserve_params { |
| uint8_t *macaddr; |
| }; |
| |
| /** |
| * struct fips_params - FIPS params config |
| * @key: pointer to key |
| * @key_len: length of key |
| * @data: pointer data buf |
| * @data_len: lenght of data buf |
| * @mode: mode |
| * @op: operation |
| * @pdev_id: pdev_id for identifying the MAC |
| */ |
| struct fips_params { |
| uint8_t *key; |
| uint32_t key_len; |
| uint8_t *data; |
| uint32_t data_len; |
| uint32_t mode; |
| uint32_t op; |
| uint32_t pdev_id; |
| }; |
| |
| /** |
| * struct mcast_group_update_param - Mcast group table update to target |
| * @action: Addition/deletion |
| * @wildcard: iwldcard table entry? |
| * @mcast_ip_addr: mcast ip address to be updated |
| * @mcast_ip_addr_bytes: mcast ip addr bytes |
| * @ucast_mac_addr: ucast peer mac subscribed to mcast ip |
| * @filter_mode: filter mode |
| * @nsrcs: number of entries in source list |
| * @srcs: source mac accpted |
| * @mask: mask |
| * @vap_id: vdev id |
| * @is_action_delete: is delete |
| * @is_filter_mode_snoop: |
| * @is_mcast_addr_len: |
| */ |
| struct mcast_group_update_params { |
| int action; |
| int wildcard; |
| uint8_t *mcast_ip_addr; |
| int mcast_ip_addr_bytes; |
| uint8_t *ucast_mac_addr; |
| uint8_t filter_mode; |
| uint8_t nsrcs; |
| uint8_t *srcs; |
| uint8_t *mask; |
| uint8_t vap_id; |
| bool is_action_delete; |
| bool is_filter_mode_snoop; |
| bool is_mcast_addr_len; |
| }; |
| |
| /** |
| * struct periodic_chan_stats_param - periodic channel stats req param |
| * @stats_period: stats period update |
| * @enable: enable/disable |
| */ |
| struct periodic_chan_stats_params { |
| uint32_t stats_period; |
| bool enable; |
| uint32_t pdev_id; |
| }; |
| |
| /** |
| * enum wmi_host_packet_power_rate_flags: packer power rate flags |
| * @WMI_HOST_FLAG_RTSENA: RTS enabled |
| * @WMI_HOST_FLAG_CTSENA: CTS enabled |
| * @WMI_HOST_FLAG_STBC: STBC is set |
| * @WMI_HOST_FLAG_LDPC: LDPC is set |
| * @WMI_HOST_FLAG_TXBF: Tx Bf enabled |
| * @WMI_HOST_FLAG_MU2: MU2 data |
| * @WMI_HOST_FLAG_MU3: MU3 data |
| * @WMI_HOST_FLAG_SERIES1: Rate series 1 |
| * @WMI_HOST_FLAG_SGI: Short gaurd interval |
| */ |
| enum wmi_host_packet_power_rate_flags { |
| WMI_HOST_FLAG_RTSENA = 0x0001, |
| WMI_HOST_FLAG_CTSENA = 0x0002, |
| WMI_HOST_FLAG_STBC = 0x0004, |
| WMI_HOST_FLAG_LDPC = 0x0008, |
| WMI_HOST_FLAG_TXBF = 0x0010, |
| WMI_HOST_FLAG_MU2 = 0x0020, |
| WMI_HOST_FLAG_MU3 = 0x0040, |
| WMI_HOST_FLAG_SERIES1 = 0x0080, |
| WMI_HOST_FLAG_SGI = 0x0100, |
| }; |
| |
| /** |
| * enum wmi_host_su_mu_ofdma_flags: packer power su mu ofdma flags |
| * @WMI_HOST_FLAG_SU: SU Data |
| * @WMI_HOST_FLAG_DL_MU_MIMO_AC: DL AC MU data |
| * @WMI_HOST_FLAG_DL_MU_MIMO_AX: DL AX MU data |
| * @WMI_HOST_FLAG_DL_OFDMA: DL OFDMA data |
| * @WMI_HOST_FLAG_UL_OFDMA: UL OFDMA data |
| * @WMI_HOST_FLAG_UL_MU_MIMO: UL MU data |
| */ |
| enum wmi_host_su_mu_ofdma_flags { |
| WMI_HOST_FLAG_SU = 0x0001, |
| WMI_HOST_FLAG_DL_MU_MIMO_AC = 0x0002, |
| WMI_HOST_FLAG_DL_MU_MIMO_AX = 0x0003, |
| WMI_HOST_FLAG_DL_OFDMA = 0x0004, |
| WMI_HOST_FLAG_UL_OFDMA = 0x0005, |
| WMI_HOST_FLAG_UL_MU_MIMO = 0x0006, |
| }; |
| |
| /** |
| * enum wmi_host_preamble_type: preamble type |
| * @WMI_HOST_PREAMBLE_OFDM: ofdm rate |
| * @WMI_HOST_PREAMBLE_CCK: cck rate |
| * @WMI_HOST_PREAMBLE_HT: ht rate |
| * @WMI_HOST_PREAMBLE_VHT: vht rate |
| * @WMI_HOST_PREAMBLE_HE: 11ax he rate |
| */ |
| enum wmi_host_preamble_type { |
| WMI_HOST_PREAMBLE_OFDM = 0, |
| WMI_HOST_PREAMBLE_CCK = 1, |
| WMI_HOST_PREAMBLE_HT = 2, |
| WMI_HOST_PREAMBLE_VHT = 3, |
| WMI_HOST_PREAMBLE_HE = 4, |
| }; |
| |
| /** |
| * struct packet_power_info_params - packet power info params |
| * @chainmask: chain mask |
| * @chan_width: channel bandwidth |
| * @rate_flags: rate flags |
| * @su_mu_ofdma: su/mu/ofdma flags |
| * @nss: number of spatial streams |
| * @preamble: preamble |
| * @hw_rate: |
| */ |
| struct packet_power_info_params { |
| uint16_t chainmask; |
| uint16_t chan_width; |
| uint16_t rate_flags; |
| uint16_t su_mu_ofdma; |
| uint16_t nss; |
| uint16_t preamble; |
| uint16_t hw_rate; |
| uint32_t pdev_id; |
| }; |
| |
| /** |
| * WMI_GPIO_CONFIG_CMDID |
| */ |
| enum { |
| WMI_HOST_GPIO_PULL_NONE, |
| WMI_HOST_GPIO_PULL_UP, |
| WMI_HOST_GPIO_PULL_DOWN, |
| }; |
| |
| /** |
| * WMI_GPIO_INTTYPE |
| */ |
| enum { |
| WMI_HOST_GPIO_INTTYPE_DISABLE, |
| WMI_HOST_GPIO_INTTYPE_RISING_EDGE, |
| WMI_HOST_GPIO_INTTYPE_FALLING_EDGE, |
| WMI_HOST_GPIO_INTTYPE_BOTH_EDGE, |
| WMI_HOST_GPIO_INTTYPE_LEVEL_LOW, |
| WMI_HOST_GPIO_INTTYPE_LEVEL_HIGH |
| }; |
| |
| /** |
| * struct wmi_host_gpio_input_event - GPIO input event structure |
| * @gpio_num: GPIO number which changed state |
| */ |
| typedef struct { |
| uint32_t gpio_num; /* GPIO number which changed state */ |
| } wmi_host_gpio_input_event; |
| |
| /** |
| * struct gpio_config_params - GPIO config params |
| * @gpio_num: GPIO number to config |
| * @input: input/output |
| * @pull_type: pull type |
| * @intr_mode: int mode |
| */ |
| struct gpio_config_params { |
| uint32_t gpio_num; |
| uint32_t input; |
| uint32_t pull_type; |
| uint32_t intr_mode; |
| }; |
| |
| /** |
| * struct gpio_output_params - GPIO output params |
| * @gpio_num: GPIO number to configure |
| * @set: set/reset |
| */ |
| struct gpio_output_params { |
| uint32_t gpio_num; |
| uint32_t set; |
| }; |
| |
| /* flags bit 0: to configure wlan priority bitmap */ |
| #define WMI_HOST_BTCOEX_PARAM_FLAGS_WLAN_PRIORITY_BITMAP_BIT (1<<0) |
| /* flags bit 1: to configure both period and wlan duration */ |
| #define WMI_HOST_BTCOEX_PARAM_FLAGS_DUTY_CYCLE_BIT (1<<1) |
| struct btcoex_cfg_params { |
| /* WLAN priority bitmask for different frame types */ |
| uint32_t btcoex_wlan_priority_bitmap; |
| /* This command is used to configure different btcoex params |
| * in different situations.The host sets the appropriate bit(s) |
| * in btcoex_param_flags to indicate which configuration parameters |
| * are valid within a particular BT coex config message, so that one |
| * BT configuration parameter can be configured without affecting |
| * other BT configuration parameters.E.g. if the host wants to |
| * configure only btcoex_wlan_priority_bitmap it sets only |
| * WMI_BTCOEX_PARAM_FLAGS_WLAN_PRIORITY_BITMAP_BIT in |
| * btcoex_param_flags so that firmware will not overwrite |
| * other params with default value passed in the command. |
| * Host can also set multiple bits in btcoex_param_flags |
| * to configure more than one param in single message. |
| */ |
| uint32_t btcoex_param_flags; |
| /* period denotes the total time in milliseconds which WLAN and BT share |
| * configured percentage for transmission and reception. |
| */ |
| uint32_t period; |
| /* wlan duration is the time in milliseconds given for wlan |
| * in above period. |
| */ |
| uint32_t wlan_duration; |
| }; |
| |
| #define WMI_HOST_COEX_CONFIG_BUF_MAX_LEN 32 /* 128 bytes */ |
| /** |
| * coex_ver_cfg_t |
| * @coex_version: Version for 4 wire coex |
| * @length: Length of payload buffer based on version |
| * @config_buf: Payload Buffer |
| */ |
| typedef struct { |
| /* VERSION_4 (4 wire coex) */ |
| uint32_t coex_version; |
| |
| /* No. of A_UINT32 elements in payload buffer. Will depend on the coex |
| * version |
| */ |
| uint32_t length; |
| |
| /* Payload buffer */ |
| uint32_t config_buf[WMI_HOST_COEX_CONFIG_BUF_MAX_LEN]; |
| } coex_ver_cfg_t; |
| |
| #define WMI_HOST_RTT_REPORT_CFR 0 |
| #define WMI_HOST_RTT_NO_REPORT_CFR 1 |
| #define WMI_HOST_RTT_AGGREGATE_REPORT_NON_CFR 2 |
| /** |
| * struct rtt_meas_req_test_params |
| * @peer: peer mac address |
| * @req_frame_type: RTT request frame type |
| * @req_bw: requested bandwidth |
| * @req_preamble: Preamble |
| * @req_num_req: num of requests |
| * @req_report_type: report type |
| * @num_measurements: number of measurements |
| * @asap_mode: priority |
| * @lci_requested: LCI requested |
| * @loc_civ_requested: |
| * @channel_param: channel param |
| * @req_id: requested id |
| */ |
| struct rtt_meas_req_test_params { |
| uint8_t peer[IEEE80211_ADDR_LEN]; |
| int req_frame_type; |
| int req_bw; |
| int req_preamble; |
| int req_num_req; |
| int req_report_type; |
| uint32_t num_measurements; |
| uint32_t asap_mode; |
| uint32_t lci_requested; |
| uint32_t loc_civ_requested; |
| struct channel_param channel; |
| uint8_t req_id; |
| }; |
| |
| /** |
| * struct rtt_meas_req_params - RTT measurement request params |
| * @req_id: Request id |
| * @vdev_id: vdev id |
| * @sta_mac_addr: pointer to station mac address |
| * @spoof_mac_addr: pointer to spoof mac address |
| * @is_mode_na: 11NA |
| * @is_mode_ac: AC |
| * @is_bw_20: 20 |
| * @is_bw_40: 40 |
| * @is_bw_80: 80 |
| * @num_probe_rqst: number of probe request |
| * @channel_param: channel param |
| */ |
| struct rtt_meas_req_params { |
| uint8_t req_id; |
| uint8_t vdev_id; |
| uint8_t *sta_mac_addr; |
| uint8_t *spoof_mac_addr; |
| bool is_mode_na; |
| bool is_mode_ac; |
| bool is_bw_20; |
| bool is_bw_40; |
| bool is_bw_80; |
| uint32_t num_probe_rqst; |
| struct channel_param channel; |
| }; |
| |
| /** |
| * struct lci_set_params - LCI params |
| * @lci_data: pointer to LCI data |
| * @latitude_unc: latitude |
| * @latitude_0_12: bits 0 to 1 of latitude |
| * @latitude_2_33: bits 2 to 33 of latitude |
| * @longitude_unc: longitude |
| * @longitude_0_1: bits 0 to 1 of longitude |
| * @longitude_2_33: bits 2 to 33 of longitude |
| * @altitude_type: altitude type |
| * @altitude_unc_0_3: altitude bits 0 - 3 |
| * @altitude_unc_4_5: altitude bits 4 - 5 |
| * @altitude: altitude |
| * @datum: dataum |
| * @reg_loc_agmt: |
| * @reg_loc_dse: |
| * @dep_sta: |
| * @version: version |
| */ |
| struct lci_set_params { |
| void *lci_data; |
| uint8_t latitude_unc:6, |
| latitude_0_1:2; |
| uint32_t latitude_2_33; |
| uint8_t longitude_unc:6, |
| longitude_0_1:2; |
| uint32_t longitude_2_33; |
| uint8_t altitude_type:4, |
| altitude_unc_0_3:4; |
| uint32_t altitude_unc_4_5:2, |
| altitude:30; |
| uint8_t datum:3, |
| reg_loc_agmt:1, |
| reg_loc_dse:1, |
| dep_sta:1, |
| version:2; |
| uint8_t *colocated_bss; |
| int msg_len; |
| }; |
| |
| /** |
| * struct lcr_set_params - LCR params |
| * @lcr_data: pointer to lcr data |
| */ |
| struct lcr_set_params { |
| void *lcr_data; |
| int msg_len; |
| }; |
| |
| /** |
| * struct rtt_keepalive_req_params - RTT keepalive params |
| * @macaddr: pointer to macaddress |
| * @req_id: Request id |
| * @vdev_id: vdev id |
| * @stop: start/stop |
| */ |
| struct rtt_keepalive_req_params { |
| uint8_t *macaddr; |
| uint8_t req_id; |
| uint8_t vdev_id; |
| bool stop; |
| }; |
| |
| /** |
| * struct rx_reorder_queue_setup_params - Reorder queue setup params |
| * @peer_mac_addr: Peer mac address |
| * @tid: TID |
| * @vdev_id: vdev id |
| * @hw_qdesc_paddr_lo: lower 32 bits of queue desc adddress |
| * @hw_qdesc_paddr_hi: upper 32 bits of queue desc adddress |
| * @queue_no: 16-bit number assigned by host for queue |
| */ |
| struct rx_reorder_queue_setup_params { |
| uint8_t *peer_macaddr; |
| uint16_t tid; |
| uint16_t vdev_id; |
| uint32_t hw_qdesc_paddr_lo; |
| uint32_t hw_qdesc_paddr_hi; |
| uint16_t queue_no; |
| }; |
| |
| /** |
| * struct rx_reorder_queue_remove_params - Reorder queue setup params |
| * @peer_mac_addr: Peer mac address |
| * @vdev_id: vdev id |
| * @peer_tid_bitmap: peer tid bitmap |
| */ |
| struct rx_reorder_queue_remove_params { |
| uint8_t *peer_macaddr; |
| uint16_t vdev_id; |
| uint32_t peer_tid_bitmap; |
| }; |
| |
| /** |
| * struct wmi_host_stats_event - Stats event params |
| * @stats_id: stats id of type wmi_host_stats_event |
| * @num_pdev_stats: number of pdev stats event structures 0 or 1 |
| * @num_pdev_ext_stats: number of pdev ext stats event structures |
| * @num_vdev_stats: number of vdev stats |
| * @num_peer_stats: number of peer stats event structures 0 or max peers |
| * @num_bcnflt_stats: number of beacon filter stats |
| * @num_chan_stats: number of channel stats |
| * @pdev_id: device id for the radio |
| * @num_bcn_stats: number of beacon stats |
| */ |
| typedef struct { |
| wmi_host_stats_id stats_id; |
| uint32_t num_pdev_stats; |
| uint32_t num_pdev_ext_stats; |
| uint32_t num_vdev_stats; |
| uint32_t num_peer_stats; |
| uint32_t num_bcnflt_stats; |
| uint32_t num_chan_stats; |
| uint32_t pdev_id; |
| uint32_t num_bcn_stats; |
| } wmi_host_stats_event; |
| |
| /** |
| * struct wmi_host_peer_extd_stats - peer extd stats event structure |
| * @peer_macaddr: Peer mac address |
| * @inactive_time: inactive time in secs |
| * @peer_chain_rssi: peer rssi |
| * @rx_duration: RX duration |
| * @peer_tx_bytes: TX bytes |
| * @peer_rx_bytes: RX bytes |
| * @last_tx_rate_code: Tx rate code of last frame |
| * @last_tx_power: Tx power latest |
| * @atf_tokens_allocated: atf tokens allocated |
| * @atf_tokens_utilized: atf tokens utilized |
| * @reserved: for future use |
| */ |
| typedef struct { |
| wmi_host_mac_addr peer_macaddr; |
| uint32_t inactive_time; |
| uint32_t peer_chain_rssi; |
| uint32_t rx_duration; |
| uint32_t peer_tx_bytes; |
| uint32_t peer_rx_bytes; |
| uint32_t last_tx_rate_code; |
| uint32_t last_tx_power; |
| uint32_t atf_tokens_allocated; |
| uint32_t atf_tokens_utilized; |
| uint32_t reserved[4]; |
| } wmi_host_peer_extd_stats; |
| |
| /** |
| * struct wmi_host_pdev_ext_stats - peer ext stats structure |
| * @rx_rssi_comb: RX rssi |
| * @rx_rssi_chain0: RX rssi chain 0 |
| * @rx_rssi_chain1: RX rssi chain 1 |
| * @rx_rssi_chain2: RX rssi chain 2 |
| * @rx_rssi_chain3: RX rssi chain 3 |
| * @rx_mcs: RX MCS array |
| * @tx_mcs: TX MCS array |
| * @ack_rssi: Ack rssi |
| */ |
| typedef struct { |
| uint32_t rx_rssi_comb; |
| uint32_t rx_rssi_chain0; |
| uint32_t rx_rssi_chain1; |
| uint32_t rx_rssi_chain2; |
| uint32_t rx_rssi_chain3; |
| uint32_t rx_mcs[10]; |
| uint32_t tx_mcs[10]; |
| uint32_t ack_rssi; |
| } wmi_host_pdev_ext_stats; |
| |
| /** |
| * struct wmi_host_dbg_tx_stats - Debug stats |
| * @comp_queued: Num HTT cookies queued to dispatch list |
| * @comp_delivered: Num HTT cookies dispatched |
| * @msdu_enqued: Num MSDU queued to WAL |
| * @mpdu_enqued: Num MPDU queue to WAL |
| * @wmm_drop: Num MSDUs dropped by WMM limit |
| * @local_enqued: Num Local frames queued |
| * @local_freed: Num Local frames done |
| * @hw_queued: Num queued to HW |
| * @hw_reaped: Num PPDU reaped from HW |
| * @underrun: Num underruns |
| * @hw_paused: HW Paused. |
| * @tx_abort: Num PPDUs cleaned up in TX abort |
| * @mpdus_requed: Num MPDUs requed by SW |
| * @tx_ko: excessive retries |
| * @tx_xretry: |
| * @data_rc: data hw rate code |
| * @self_triggers: Scheduler self triggers |
| * @sw_retry_failure: frames dropped due to excessive sw retries |
| * @illgl_rate_phy_err: illegal rate phy errors |
| * @pdev_cont_xretry: wal pdev continous xretry |
| * @pdev_tx_timeout: wal pdev continous xretry |
| * @pdev_resets: wal pdev resets |
| * @stateless_tid_alloc_failure: frames dropped due to non-availability of |
| * stateless TIDs |
| * @phy_underrun: PhY/BB underrun |
| * @txop_ovf: MPDU is more than txop limit |
| * @seq_posted: Number of Sequences posted |
| * @seq_failed_queueing: Number of Sequences failed queueing |
| * @seq_completed: Number of Sequences completed |
| * @seq_restarted: Number of Sequences restarted |
| * @mu_seq_posted: Number of MU Sequences posted |
| * @mpdus_sw_flush: Num MPDUs flushed by SW, HWPAUSED, SW TXABORT |
| * (Reset,channel change) |
| * @mpdus_hw_filter: Num MPDUs filtered by HW, all filter condition |
| * (TTL expired) |
| * @mpdus_truncated: Num MPDUs truncated by PDG (TXOP, TBTT, |
| * PPDU_duration based on rate, dyn_bw) |
| * @mpdus_ack_failed: Num MPDUs that was tried but didn't receive ACK or BA |
| * @mpdus_expired: Num MPDUs that was dropped du to expiry. |
| * @mc_dropr: Num mc drops |
| */ |
| typedef struct { |
| int32_t comp_queued; |
| int32_t comp_delivered; |
| int32_t msdu_enqued; |
| int32_t mpdu_enqued; |
| int32_t wmm_drop; |
| int32_t local_enqued; |
| int32_t local_freed; |
| int32_t hw_queued; |
| int32_t hw_reaped; |
| int32_t underrun; |
| uint32_t hw_paused; |
| int32_t tx_abort; |
| int32_t mpdus_requed; |
| uint32_t tx_ko; |
| uint32_t tx_xretry; |
| uint32_t data_rc; |
| uint32_t self_triggers; |
| uint32_t sw_retry_failure; |
| uint32_t illgl_rate_phy_err; |
| uint32_t pdev_cont_xretry; |
| uint32_t pdev_tx_timeout; |
| uint32_t pdev_resets; |
| uint32_t stateless_tid_alloc_failure; |
| uint32_t phy_underrun; |
| uint32_t txop_ovf; |
| uint32_t seq_posted; |
| uint32_t seq_failed_queueing; |
| uint32_t seq_completed; |
| uint32_t seq_restarted; |
| uint32_t mu_seq_posted; |
| int32_t mpdus_sw_flush; |
| int32_t mpdus_hw_filter; |
| int32_t mpdus_truncated; |
| int32_t mpdus_ack_failed; |
| int32_t mpdus_expired; |
| uint32_t mc_drop; |
| } wmi_host_dbg_tx_stats; |
| |
| /** |
| * struct wmi_host_dbg_rx_stats - RX Debug stats |
| * @mid_ppdu_route_change: Cnts any change in ring routing mid-ppdu |
| * @status_rcvd: Total number of statuses processed |
| * @r0_frags: Extra frags on rings 0 |
| * @r1_frags: Extra frags on rings 1 |
| * @r2_frags: Extra frags on rings 2 |
| * @r3_frags: Extra frags on rings 3 |
| * @htt_msdus: MSDUs delivered to HTT |
| * @htt_mpdus: MPDUs delivered to HTT |
| * @loc_msdus: MSDUs delivered to local stack |
| * @loc_mpdus: MPDUS delivered to local stack |
| * @oversize_amsdu: AMSDUs that have more MSDUs than the status ring size |
| * @phy_errs: Number of PHY errors |
| * @phy_err_drop: Number of PHY errors drops |
| * @mpdu_errs: Number of mpdu errors - FCS, MIC, ENC etc. |
| * @pdev_rx_timeout: Number of rx inactivity timeouts |
| * @rx_ovfl_errs: Number of rx overflow errors. |
| */ |
| typedef struct { |
| int32_t mid_ppdu_route_change; |
| int32_t status_rcvd; |
| int32_t r0_frags; |
| int32_t r1_frags; |
| int32_t r2_frags; |
| int32_t r3_frags; |
| int32_t htt_msdus; |
| int32_t htt_mpdus; |
| int32_t loc_msdus; |
| int32_t loc_mpdus; |
| int32_t oversize_amsdu; |
| int32_t phy_errs; |
| int32_t phy_err_drop; |
| int32_t mpdu_errs; |
| uint32_t pdev_rx_timeout; |
| int32_t rx_ovfl_errs; |
| } wmi_host_dbg_rx_stats; |
| |
| /** struct wmi_host_dbg_mem_stats - memory stats |
| * @iram_free_size: IRAM free size on target |
| * @dram_free_size: DRAM free size on target |
| * @sram_free_size: SRAM free size on target |
| */ |
| typedef struct { |
| uint32_t iram_free_size; |
| uint32_t dram_free_size; |
| /* Only Non-TLV */ |
| uint32_t sram_free_size; |
| } wmi_host_dbg_mem_stats; |
| |
| typedef struct { |
| /* Only TLV */ |
| int32_t dummy;/* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */ |
| } wmi_host_dbg_peer_stats; |
| |
| /** |
| * struct wmi_host_dbg_stats - host debug stats |
| * @tx: TX stats of type wmi_host_dbg_tx_stats |
| * @rx: RX stats of type wmi_host_dbg_rx_stats |
| * @mem: Memory stats of type wmi_host_dbg_mem_stats |
| * @peer: peer stats of type wmi_host_dbg_peer_stats |
| */ |
| typedef struct { |
| wmi_host_dbg_tx_stats tx; |
| wmi_host_dbg_rx_stats rx; |
| wmi_host_dbg_mem_stats mem; |
| wmi_host_dbg_peer_stats peer; |
| } wmi_host_dbg_stats; |
| |
| /** |
| * struct wmi_host_pdev_stats - PDEV stats |
| * @chan_nf: Channel noise floor |
| * @tx_frame_count: TX frame count |
| * @rx_frame_count: RX frame count |
| * @rx_clear_count: rx clear count |
| * @cycle_count: cycle count |
| * @phy_err_count: Phy error count |
| * @chan_tx_pwr: Channel Tx Power |
| * @pdev_stats: WAL dbg stats |
| * @ackRcvBad: |
| * @rtsBad: |
| * @rtsGood: |
| * @fcsBad: |
| * @noBeacons: |
| * @mib_int_count: |
| */ |
| typedef struct { |
| int32_t chan_nf; |
| uint32_t tx_frame_count; |
| uint32_t rx_frame_count; |
| uint32_t rx_clear_count; |
| uint32_t cycle_count; |
| uint32_t phy_err_count; |
| uint32_t chan_tx_pwr; |
| wmi_host_dbg_stats pdev_stats; |
| uint32_t ackRcvBad; |
| uint32_t rtsBad; |
| uint32_t rtsGood; |
| uint32_t fcsBad; |
| uint32_t noBeacons; |
| uint32_t mib_int_count; |
| } wmi_host_pdev_stats; |
| |
| |
| /** |
| * struct wmi_unit_test_event - Structure corresponding to WMI Unit test event |
| * @vdev_id: VDEV ID |
| * @module_id: MODULE ID |
| * @diag_token: Diag Token (the number that was generated in the unit-test cmd) |
| * @flag: flag has 2 bits 0x1 indicates status, and 0x2 indicates done-bit |
| * @payload_len: payload_len (blindly copied from payload_len field in WMI) |
| * @buffer_len: actual number of data bytes in the variable data size TLV |
| * buffer_len is likely to be the nearest multiple of 4 (from |
| * payload_len). both buffer_len and payload_len need to be |
| * passed to wifitool so that the driver can be agnostic |
| * regarding these differences. |
| * @buffer: data buffer |
| */ |
| typedef struct { |
| uint32_t vdev_id; |
| uint32_t module_id; |
| uint32_t diag_token; |
| uint32_t flag; |
| uint32_t payload_len; |
| uint32_t buffer_len; |
| uint8_t buffer[1]; |
| } wmi_unit_test_event; |
| |
| |
| /** |
| * struct wmi_host_snr_info - WMI host Signal to noise ration info |
| * @bcn_snr: beacon SNR |
| * @dat_snr: Data frames SNR |
| */ |
| typedef struct { |
| int32_t bcn_snr; |
| int32_t dat_snr; |
| } wmi_host_snr_info; |
| |
| #define WMI_HOST_MAX_TX_RATE_VALUES 10 /*Max Tx Rates */ |
| #define WMI_HOST_MAX_RSSI_VALUES 10 /*Max Rssi values */ |
| |
| /* The WLAN_MAX_AC macro cannot be changed without breaking |
| * * WMI compatibility. |
| * * The maximum value of access category |
| * */ |
| #define WMI_HOST_WLAN_MAX_AC 4 |
| |
| /** |
| * struct wmi_host_vdev_stats - vdev stats structure |
| * @vdev_id: unique id identifying the VDEV, generated by the caller |
| * Rest all Only TLV |
| * @vdev_snr: wmi_host_snr_info |
| * @tx_frm_cnt: Total number of packets(per AC) that were successfully |
| * transmitted (with and without retries, |
| * including multi-cast, broadcast) |
| * @rx_frm_cnt: Total number of packets that were successfully received |
| * (after appropriate filter rules including multi-cast, broadcast) |
| * @multiple_retry_cnt: The number of MSDU packets and MMPDU frames per AC |
| * that the 802.11 station successfully transmitted after |
| * more than one retransmission attempt |
| * @fail_cnt: Total number packets(per AC) failed to transmit |
| * @rts_fail_cnt: Total number of RTS/CTS sequence failures for transmission |
| * of a packet |
| * @rts_succ_cnt: Total number of RTS/CTS sequence success for transmission |
| * of a packet |
| * @rx_err_cnt: The receive error count. HAL will provide the |
| * RxP FCS error global |
| * @rx_discard_cnt: The sum of the receive error count and |
| * dropped-receive-buffer error count (FCS error) |
| * @ack_fail_cnt: Total number packets failed transmit because of no |
| * ACK from the remote entity |
| * @tx_rate_history:History of last ten transmit rate, in units of 500 kbit/sec |
| * @bcn_rssi_history: History of last ten Beacon rssi of the connected Bss |
| */ |
| typedef struct { |
| uint32_t vdev_id; |
| /* Rest all Only TLV */ |
| wmi_host_snr_info vdev_snr; |
| uint32_t tx_frm_cnt[WMI_HOST_WLAN_MAX_AC]; |
| uint32_t rx_frm_cnt; |
| uint32_t multiple_retry_cnt[WMI_HOST_WLAN_MAX_AC]; |
| uint32_t fail_cnt[WMI_HOST_WLAN_MAX_AC]; |
| uint32_t rts_fail_cnt; |
| uint32_t rts_succ_cnt; |
| uint32_t rx_err_cnt; |
| uint32_t rx_discard_cnt; |
| uint32_t ack_fail_cnt; |
| uint32_t tx_rate_history[WMI_HOST_MAX_TX_RATE_VALUES]; |
| uint32_t bcn_rssi_history[WMI_HOST_MAX_RSSI_VALUES]; |
| } wmi_host_vdev_stats; |
| |
| /** |
| * struct wmi_host_vdev_stats - vdev stats structure |
| * @vdev_id: unique id identifying the VDEV, generated by the caller |
| * @tx_bcn_succ_cnt: Total number of beacon frame transmitted successfully |
| * @tx_bcn_outage_cnt: Total number of failed beacons |
| */ |
| typedef struct { |
| uint32_t vdev_id; |
| uint32_t tx_bcn_succ_cnt; |
| uint32_t tx_bcn_outage_cnt; |
| } wmi_host_bcn_stats; |
| |
| /** |
| * struct wmi_host_vdev_extd_stats - VDEV extended stats |
| * @vdev_id: unique id identifying the VDEV, generated by the caller |
| * @ppdu_aggr_cnt: No of Aggrs Queued to HW |
| * @ppdu_noack: No of PPDU's not Acked includes both aggr and nonaggr's |
| * @mpdu_queued: No of MPDU/Subframes's queued to HW in Aggregates |
| * @ppdu_nonaggr_cnt: No of NonAggr/MPDU/Subframes's queued to HW |
| * in Legacy NonAggregates |
| * @mpdu_sw_requed: No of MPDU/Subframes's SW requeued includes |
| * both Aggr and NonAggr |
| * @mpdu_suc_retry: No of MPDU/Subframes's transmitted Successfully |
| * after Single/mul HW retry |
| * @mpdu_suc_multitry: No of MPDU/Subframes's transmitted Success |
| * after Multiple HW retry |
| * @mpdu_fail_retry: No of MPDU/Subframes's failed transmission |
| * after Multiple HW retry |
| * @reserved[13]: for future extensions set to 0x0 |
| */ |
| typedef struct { |
| uint32_t vdev_id; |
| uint32_t ppdu_aggr_cnt; |
| uint32_t ppdu_noack; |
| uint32_t mpdu_queued; |
| uint32_t ppdu_nonaggr_cnt; |
| uint32_t mpdu_sw_requed; |
| uint32_t mpdu_suc_retry; |
| uint32_t mpdu_suc_multitry; |
| uint32_t mpdu_fail_retry; |
| uint32_t reserved[13]; |
| } wmi_host_vdev_extd_stats; |
| |
| /** |
| * struct wmi_host_peer_stats - peer stats |
| * @peer_macaddr: peer MAC address |
| * @peer_rssi: rssi |
| * @peer_rssi_seq_num: rssi sequence number |
| * @peer_tx_rate: last tx data rate used for peer |
| * @peer_rx_rate: last rx data rate used for peer |
| * @currentper: Current PER |
| * @retries: Retries happend during transmission |
| * @txratecount: Maximum Aggregation Size |
| * @max4msframelen: Max4msframelen of tx rates used |
| * @totalsubframes: Total no of subframes |
| * @txbytes: No of bytes transmitted to the client |
| * @nobuffs[4]: Packet Loss due to buffer overflows |
| * @excretries[4]: Packet Loss due to excessive retries |
| * @peer_rssi_changed: how many times peer's RSSI changed by a |
| * non-negligible amount |
| */ |
| typedef struct { |
| wmi_host_mac_addr peer_macaddr; |
| uint32_t peer_rssi; |
| uint32_t peer_rssi_seq_num; |
| uint32_t peer_tx_rate; |
| uint32_t peer_rx_rate; |
| uint32_t currentper; |
| uint32_t retries; |
| uint32_t txratecount; |
| uint32_t max4msframelen; |
| uint32_t totalsubframes; |
| uint32_t txbytes; |
| uint32_t nobuffs[4]; |
| uint32_t excretries[4]; |
| uint32_t peer_rssi_changed; |
| } wmi_host_peer_stats; |
| |
| typedef struct { |
| uint32_t dummy; |
| } wmi_host_bcnflt_stats; |
| |
| /** |
| * struct wmi_host_chan_stats - WMI chan stats |
| * @chan_mhz: Primary channel freq of the channel for which stats are sent |
| * @sampling_period_us: Time spent on the channel |
| * @rx_clear_count: Aggregate duration over a sampling period for |
| * which channel activity was observed |
| * @tx_duration_us: Accumalation of the TX PPDU duration over a sampling period |
| * @rx_duration_us: Accumalation of the RX PPDU duration over a sampling period |
| */ |
| typedef struct { |
| uint32_t chan_mhz; |
| uint32_t sampling_period_us; |
| uint32_t rx_clear_count; |
| uint32_t tx_duration_us; |
| uint32_t rx_duration_us; |
| } wmi_host_chan_stats; |
| |
| #define WMI_EVENT_ID_INVALID 0 |
| /** |
| * Host based ENUM IDs for events to abstract target enums for event_id |
| */ |
| typedef enum { |
| wmi_service_ready_event_id = 0, |
| wmi_ready_event_id, |
| wmi_dbg_msg_event_id, |
| wmi_scan_event_id, |
| wmi_echo_event_id, |
| wmi_update_stats_event_id, |
| wmi_inst_rssi_stats_event_id, |
| wmi_vdev_start_resp_event_id, |
| wmi_vdev_standby_req_event_id, |
| wmi_vdev_resume_req_event_id, |
| wmi_vdev_stopped_event_id, |
| wmi_peer_sta_kickout_event_id, |
| wmi_host_swba_event_id, |
| wmi_tbttoffset_update_event_id, |
| wmi_mgmt_rx_event_id, |
| wmi_chan_info_event_id, |
| wmi_phyerr_event_id, |
| wmi_roam_event_id, |
| wmi_profile_match, |
| wmi_debug_print_event_id, |
| wmi_pdev_qvit_event_id, |
| wmi_wlan_profile_data_event_id, |
| wmi_rtt_meas_report_event_id, |
| wmi_tsf_meas_report_event_id, |
| wmi_rtt_error_report_event_id, |
| wmi_rtt_keepalive_event_id, |
| wmi_oem_cap_event_id, |
| wmi_oem_meas_report_event_id, |
| wmi_oem_report_event_id, |
| wmi_nan_event_id, |
| wmi_wow_wakeup_host_event_id, |
| wmi_gtk_offload_status_event_id, |
| wmi_gtk_rekey_fail_event_id, |
| wmi_dcs_interference_event_id, |
| wmi_pdev_tpc_config_event_id, |
| wmi_csa_handling_event_id, |
| wmi_gpio_input_event_id, |
| wmi_peer_ratecode_list_event_id, |
| wmi_generic_buffer_event_id, |
| wmi_mcast_buf_release_event_id, |
| wmi_mcast_list_ageout_event_id, |
| wmi_vdev_get_keepalive_event_id, |
| wmi_wds_peer_event_id, |
| wmi_peer_sta_ps_statechg_event_id, |
| wmi_pdev_fips_event_id, |
| wmi_tt_stats_event_id, |
| wmi_pdev_channel_hopping_event_id, |
| wmi_pdev_ani_cck_level_event_id, |
| wmi_pdev_ani_ofdm_level_event_id, |
| wmi_pdev_reserve_ast_entry_event_id, |
| wmi_pdev_nfcal_power_event_id, |
| wmi_pdev_tpc_event_id, |
| wmi_pdev_get_ast_info_event_id, |
| wmi_pdev_temperature_event_id, |
| wmi_pdev_nfcal_power_all_channels_event_id, |
| wmi_pdev_bss_chan_info_event_id, |
| wmi_mu_report_event_id, |
| wmi_pdev_utf_event_id, |
| wmi_pdev_dump_event_id, |
| wmi_tx_pause_event_id, |
| wmi_dfs_radar_event_id, |
| wmi_pdev_l1ss_track_event_id, |
| wmi_service_ready_ext_event_id, |
| wmi_vdev_install_key_complete_event_id, |
| wmi_vdev_mcc_bcn_intvl_change_req_event_id, |
| wmi_vdev_tsf_report_event_id, |
| wmi_peer_info_event_id, |
| wmi_peer_tx_fail_cnt_thr_event_id, |
| wmi_peer_estimated_linkspeed_event_id, |
| wmi_peer_state_event_id, |
| wmi_offload_bcn_tx_status_event_id, |
| wmi_offload_prob_resp_tx_status_event_id, |
| wmi_mgmt_tx_completion_event_id, |
| wmi_tx_delba_complete_event_id, |
| wmi_tx_addba_complete_event_id, |
| wmi_ba_rsp_ssn_event_id, |
| wmi_aggr_state_trig_event_id, |
| wmi_roam_synch_event_id, |
| wmi_roam_synch_frame_event_id, |
| wmi_p2p_disc_event_id, |
| wmi_p2p_noa_event_id, |
| wmi_p2p_lo_stop_event_id, |
| wmi_pdev_resume_event_id, |
| wmi_d0_wow_disable_ack_event_id, |
| wmi_wow_initial_wakeup_event_id, |
| wmi_stats_ext_event_id, |
| wmi_iface_link_stats_event_id, |
| wmi_peer_link_stats_event_id, |
| wmi_radio_link_stats_link, |
| wmi_update_fw_mem_dump_event_id, |
| wmi_diag_event_id_log_supported_event_id, |
| wmi_nlo_match_event_id, |
| wmi_nlo_scan_complete_event_id, |
| wmi_apfind_event_id, |
| wmi_passpoint_match_event_id, |
| wmi_chatter_pc_query_event_id, |
| wmi_pdev_ftm_intg_event_id, |
| wmi_wlan_freq_avoid_event_id, |
| wmi_thermal_mgmt_event_id, |
| wmi_diag_container_event_id, |
| wmi_host_auto_shutdown_event_id, |
| wmi_update_whal_mib_stats_event_id, |
| wmi_update_vdev_rate_stats_event_id, |
| wmi_diag_event_id, |
| wmi_unit_test_event_id, |
| wmi_ocb_set_sched_event_id, |
| wmi_dbg_mesg_flush_complete_event_id, |
| wmi_rssi_breach_event_id, |
| wmi_uploadh_event_id, |
| wmi_captureh_event_id, |
| wmi_rfkill_state_change_event_id, |
| wmi_tdls_peer_event_id, |
| wmi_batch_scan_enabled_event_id, |
| wmi_batch_scan_result_event_id, |
| wmi_lpi_result_event_id, |
| wmi_lpi_status_event_id, |
| wmi_lpi_handoff_event_id, |
| wmi_extscan_start_stop_event_id, |
| wmi_extscan_operation_event_id, |
| wmi_extscan_table_usage_event_id, |
| wmi_extscan_cached_results_event_id, |
| wmi_extscan_wlan_change_results_event_id, |
| wmi_extscan_hotlist_match_event_id, |
| wmi_extscan_capabilities_event_id, |
| wmi_extscan_hotlist_ssid_match_event_id, |
| wmi_mdns_stats_event_id, |
| wmi_sap_ofl_add_sta_event_id, |
| wmi_sap_ofl_del_sta_event_id, |
| wmi_ocb_set_config_resp_event_id, |
| wmi_ocb_get_tsf_timer_resp_event_id, |
| wmi_dcc_get_stats_resp_event_id, |
| wmi_dcc_update_ndl_resp_event_id, |
| wmi_dcc_stats_event_id, |
| wmi_soc_set_hw_mode_resp_event_id, |
| wmi_soc_hw_mode_transition_event_id, |
| wmi_soc_set_dual_mac_config_resp_event_id, |
| wmi_tx_data_traffic_ctrl_event_id, |
| wmi_peer_tx_mu_txmit_count_event_id, |
| wmi_peer_gid_userpos_list_event_id, |
| wmi_pdev_check_cal_version_event_id, |
| wmi_atf_peer_stats_event_id, |
| wmi_peer_delete_response_event_id, |
| wmi_pdev_csa_switch_count_status_event_id, |
| wmi_reg_chan_list_cc_event_id, |
| wmi_offchan_data_tx_completion_event, |
| wmi_dfs_cac_complete_id, |
| wmi_dfs_radar_detection_event_id, |
| wmi_ext_tbttoffset_update_event_id, |
| wmi_11d_new_country_event_id, |
| wmi_get_arp_stats_req_id, |
| wmi_service_available_event_id, |
| wmi_update_rcpi_event_id, |
| wmi_pdev_wds_entry_list_event_id, |
| wmi_ndp_initiator_rsp_event_id, |
| wmi_ndp_indication_event_id, |
| wmi_ndp_confirm_event_id, |
| wmi_ndp_responder_rsp_event_id, |
| wmi_ndp_end_indication_event_id, |
| wmi_ndp_end_rsp_event_id, |
| wmi_oem_response_event_id, |
| wmi_peer_stats_info_event_id, |
| wmi_pdev_chip_power_stats_event_id, |
| wmi_ap_ps_egap_info_event_id, |
| wmi_peer_assoc_conf_event_id, |
| wmi_vdev_delete_resp_event_id, |
| wmi_bpf_capability_info_event_id, |
| wmi_vdev_encrypt_decrypt_data_rsp_event_id, |
| wmi_report_rx_aggr_failure_event_id, |
| wmi_pdev_chip_pwr_save_failure_detect_event_id, |
| wmi_peer_antdiv_info_event_id, |
| wmi_pdev_set_hw_mode_rsp_event_id, |
| wmi_pdev_hw_mode_transition_event_id, |
| wmi_pdev_set_mac_config_resp_event_id, |
| wmi_coex_bt_activity_event_id, |
| wmi_mgmt_tx_bundle_completion_event_id, |
| wmi_radio_tx_power_level_stats_event_id, |
| wmi_report_stats_event_id, |
| wmi_dma_buf_release_event_id, |
| wmi_sap_obss_detection_report_event_id, |
| wmi_host_swfda_event_id, |
| |
| wmi_events_max, |
| } wmi_conv_event_id; |
| |
| #define WMI_UNAVAILABLE_PARAM 0 |
| /** |
| * Host based ENUM IDs for PDEV params to abstract target enums |
| */ |
| typedef enum { |
| wmi_pdev_param_tx_chain_mask = 0, |
| wmi_pdev_param_rx_chain_mask, |
| wmi_pdev_param_txpower_limit2g, |
| wmi_pdev_param_txpower_limit5g, |
| wmi_pdev_param_txpower_scale, |
| wmi_pdev_param_beacon_gen_mode, |
| wmi_pdev_param_beacon_tx_mode, |
| wmi_pdev_param_resmgr_offchan_mode, |
| wmi_pdev_param_protection_mode, |
| wmi_pdev_param_dynamic_bw, |
| wmi_pdev_param_non_agg_sw_retry_th, |
| wmi_pdev_param_agg_sw_retry_th, |
| wmi_pdev_param_sta_kickout_th, |
| wmi_pdev_param_ac_aggrsize_scaling, |
| wmi_pdev_param_ltr_enable, |
| wmi_pdev_param_ltr_ac_latency_be, |
| wmi_pdev_param_ltr_ac_latency_bk, |
| wmi_pdev_param_ltr_ac_latency_vi, |
| wmi_pdev_param_ltr_ac_latency_vo, |
| wmi_pdev_param_ltr_ac_latency_timeout, |
| wmi_pdev_param_ltr_sleep_override, |
| wmi_pdev_param_ltr_rx_override, |
| wmi_pdev_param_ltr_tx_activity_timeout, |
| wmi_pdev_param_l1ss_enable, |
| wmi_pdev_param_dsleep_enable, |
| wmi_pdev_param_pcielp_txbuf_flush, |
| wmi_pdev_param_pcielp_txbuf_watermark, |
| wmi_pdev_param_pcielp_txbuf_tmo_en, |
| wmi_pdev_param_pcielp_txbuf_tmo_value, |
| wmi_pdev_param_pdev_stats_update_period, |
| wmi_pdev_param_vdev_stats_update_period, |
| wmi_pdev_param_peer_stats_update_period, |
| wmi_pdev_param_bcnflt_stats_update_period, |
| wmi_pdev_param_pmf_qos, |
| wmi_pdev_param_arp_ac_override, |
| wmi_pdev_param_dcs, |
| wmi_pdev_param_ani_enable, |
| wmi_pdev_param_ani_poll_period, |
| wmi_pdev_param_ani_listen_period, |
| wmi_pdev_param_ani_ofdm_level, |
| wmi_pdev_param_ani_cck_level, |
| wmi_pdev_param_dyntxchain, |
| wmi_pdev_param_proxy_sta, |
| wmi_pdev_param_idle_ps_config, |
| wmi_pdev_param_power_gating_sleep, |
| wmi_pdev_param_aggr_burst, |
| wmi_pdev_param_rx_decap_mode, |
| wmi_pdev_param_fast_channel_reset, |
| wmi_pdev_param_burst_dur, |
| wmi_pdev_param_burst_enable, |
| wmi_pdev_param_smart_antenna_default_antenna, |
| wmi_pdev_param_igmpmld_override, |
| wmi_pdev_param_igmpmld_tid, |
| wmi_pdev_param_antenna_gain, |
| wmi_pdev_param_rx_filter, |
| wmi_pdev_set_mcast_to_ucast_tid, |
| wmi_pdev_param_proxy_sta_mode, |
| wmi_pdev_param_set_mcast2ucast_mode, |
| wmi_pdev_param_set_mcast2ucast_buffer, |
| wmi_pdev_param_remove_mcast2ucast_buffer, |
| wmi_pdev_peer_sta_ps_statechg_enable, |
| wmi_pdev_param_igmpmld_ac_override, |
| wmi_pdev_param_block_interbss, |
| wmi_pdev_param_set_disable_reset_cmdid, |
| wmi_pdev_param_set_msdu_ttl_cmdid, |
| wmi_pdev_param_set_ppdu_duration_cmdid, |
| wmi_pdev_param_txbf_sound_period_cmdid, |
| wmi_pdev_param_set_promisc_mode_cmdid, |
| wmi_pdev_param_set_burst_mode_cmdid, |
| wmi_pdev_param_en_stats, |
| wmi_pdev_param_mu_group_policy, |
| wmi_pdev_param_noise_detection, |
| wmi_pdev_param_noise_threshold, |
| wmi_pdev_param_dpd_enable, |
| wmi_pdev_param_set_mcast_bcast_echo, |
| wmi_pdev_param_atf_strict_sch, |
| wmi_pdev_param_atf_sched_duration, |
| wmi_pdev_param_ant_plzn, |
| wmi_pdev_param_mgmt_retry_limit, |
| wmi_pdev_param_sensitivity_level, |
| wmi_pdev_param_signed_txpower_2g, |
| wmi_pdev_param_signed_txpower_5g, |
| wmi_pdev_param_enable_per_tid_amsdu, |
| wmi_pdev_param_enable_per_tid_ampdu, |
| wmi_pdev_param_cca_threshold, |
| wmi_pdev_param_rts_fixed_rate, |
| wmi_pdev_param_cal_period, |
| wmi_pdev_param_pdev_reset, |
| wmi_pdev_param_wapi_mbssid_offset, |
| wmi_pdev_param_arp_srcaddr, |
| wmi_pdev_param_arp_dstaddr, |
| wmi_pdev_param_txpower_decr_db, |
| wmi_pdev_param_rx_batchmode, |
| wmi_pdev_param_packet_aggr_delay, |
| wmi_pdev_param_atf_obss_noise_sch, |
| wmi_pdev_param_atf_obss_noise_scaling_factor, |
| wmi_pdev_param_cust_txpower_scale, |
| wmi_pdev_param_atf_dynamic_enable, |
| wmi_pdev_param_atf_ssid_group_policy, |
| wmi_pdev_param_rfkill_enable, |
| wmi_pdev_param_hw_rfkill_config, |
| wmi_pdev_param_low_power_rf_enable, |
| wmi_pdev_param_l1ss_track, |
| wmi_pdev_param_hyst_en, |
| wmi_pdev_param_power_collapse_enable, |
| wmi_pdev_param_led_sys_state, |
| wmi_pdev_param_led_enable, |
| wmi_pdev_param_audio_over_wlan_latency, |
| wmi_pdev_param_audio_over_wlan_enable, |
| wmi_pdev_param_whal_mib_stats_update_enable, |
| wmi_pdev_param_vdev_rate_stats_update_period, |
| wmi_pdev_param_cts_cbw, |
| wmi_pdev_param_wnts_config, |
| wmi_pdev_param_adaptive_early_rx_enable, |
| wmi_pdev_param_adaptive_early_rx_min_sleep_slop, |
| wmi_pdev_param_adaptive_early_rx_inc_dec_step, |
| wmi_pdev_param_early_rx_fix_sleep_slop, |
| wmi_pdev_param_bmiss_based_adaptive_bto_enable, |
| wmi_pdev_param_bmiss_bto_min_bcn_timeout, |
| wmi_pdev_param_bmiss_bto_inc_dec_step, |
| wmi_pdev_param_bto_fix_bcn_timeout, |
| wmi_pdev_param_ce_based_adaptive_bto_enable, |
| wmi_pdev_param_ce_bto_combo_ce_value, |
| wmi_pdev_param_tx_chain_mask_2g, |
| wmi_pdev_param_rx_chain_mask_2g, |
| wmi_pdev_param_tx_chain_mask_5g, |
| wmi_pdev_param_rx_chain_mask_5g, |
| wmi_pdev_param_tx_chain_mask_cck, |
| wmi_pdev_param_tx_chain_mask_1ss, |
| wmi_pdev_param_enable_btcoex, |
| wmi_pdev_param_atf_peer_stats, |
| wmi_pdev_param_btcoex_cfg, |
| wmi_pdev_param_mesh_mcast_enable, |
| wmi_pdev_param_tx_ack_timeout, |
| wmi_pdev_param_soft_tx_chain_mask, |
| |
| wmi_pdev_param_max, |
| } wmi_conv_pdev_params_id; |
| |
| |
| /** |
| * Host based ENUM IDs for VDEV params to abstract target enums |
| */ |
| typedef enum { |
| wmi_vdev_param_rts_threshold = 0, |
| wmi_vdev_param_fragmentation_threshold, |
| wmi_vdev_param_beacon_interval, |
| wmi_vdev_param_listen_interval, |
| wmi_vdev_param_multicast_rate, |
| wmi_vdev_param_mgmt_tx_rate, |
| wmi_vdev_param_slot_time, |
| wmi_vdev_param_preamble, |
| wmi_vdev_param_swba_time, |
| wmi_vdev_stats_update_period, |
| wmi_vdev_pwrsave_ageout_time, |
| wmi_vdev_host_swba_interval, |
| wmi_vdev_param_dtim_period, |
| wmi_vdev_oc_scheduler_air_time_limit, |
| wmi_vdev_param_wds, |
| wmi_vdev_param_atim_window, |
| wmi_vdev_param_bmiss_count_max, |
| wmi_vdev_param_bmiss_first_bcnt, |
| wmi_vdev_param_bmiss_final_bcnt, |
| wmi_vdev_param_feature_wmm, |
| wmi_vdev_param_chwidth, |
| wmi_vdev_param_chextoffset, |
| wmi_vdev_param_disable_htprotection, |
| wmi_vdev_param_sta_quickkickout, |
| wmi_vdev_param_mgmt_rate, |
| wmi_vdev_param_protection_mode, |
| wmi_vdev_param_fixed_rate, |
| wmi_vdev_param_sgi, |
| wmi_vdev_param_ldpc, |
| wmi_vdev_param_tx_stbc, |
| wmi_vdev_param_rx_stbc, |
| wmi_vdev_param_intra_bss_fwd, |
| wmi_vdev_param_def_keyid, |
| wmi_vdev_param_nss, |
| wmi_vdev_param_bcast_data_rate, |
| wmi_vdev_param_mcast_data_rate, |
| wmi_vdev_param_mcast_indicate, |
| wmi_vdev_param_dhcp_indicate, |
| wmi_vdev_param_unknown_dest_indicate, |
| wmi_vdev_param_ap_keepalive_min_idle_inactive_time_secs, |
| wmi_vdev_param_ap_keepalive_max_idle_inactive_time_secs, |
| wmi_vdev_param_ap_keepalive_max_unresponsive_time_secs, |
| wmi_vdev_param_ap_enable_nawds, |
| wmi_vdev_param_mcast2ucast_set, |
| wmi_vdev_param_enable_rtscts, |
| wmi_vdev_param_rc_num_retries, |
| wmi_vdev_param_txbf, |
| wmi_vdev_param_packet_powersave, |
| wmi_vdev_param_drop_unencry, |
| wmi_vdev_param_tx_encap_type, |
| wmi_vdev_param_ap_detect_out_of_sync_sleeping_sta_time_secs, |
| wmi_vdev_param_cabq_maxdur, |
| wmi_vdev_param_mfptest_set, |
| wmi_vdev_param_rts_fixed_rate, |
| wmi_vdev_param_vht_sgimask, |
| wmi_vdev_param_vht80_ratemask, |
| wmi_vdev_param_early_rx_adjust_enable, |
| wmi_vdev_param_early_rx_tgt_bmiss_num, |
| wmi_vdev_param_early_rx_bmiss_sample_cycle, |
| wmi_vdev_param_early_rx_slop_step, |
| wmi_vdev_param_early_rx_init_slop, |
| wmi_vdev_param_early_rx_adjust_pause, |
| wmi_vdev_param_proxy_sta, |
| wmi_vdev_param_meru_vc, |
| wmi_vdev_param_rx_decap_type, |
| wmi_vdev_param_bw_nss_ratemask, |
| wmi_vdev_param_sensor_ap, |
| wmi_vdev_param_beacon_rate, |
| wmi_vdev_param_dtim_enable_cts, |
| wmi_vdev_param_sta_kickout, |
| wmi_vdev_param_tx_pwrlimit, |
| wmi_vdev_param_snr_num_for_cal, |
| wmi_vdev_param_roam_fw_offload, |
| wmi_vdev_param_enable_rmc, |
| wmi_vdev_param_ibss_max_bcn_lost_ms, |
| wmi_vdev_param_max_rate, |
| wmi_vdev_param_early_rx_drift_sample, |
| wmi_vdev_param_set_ibss_tx_fail_cnt_thr, |
| wmi_vdev_param_ebt_resync_timeout, |
| wmi_vdev_param_aggr_trig_event_enable, |
| wmi_vdev_param_is_ibss_power_save_allowed, |
| wmi_vdev_param_is_power_collapse_allowed, |
| wmi_vdev_param_is_awake_on_txrx_enabled, |
| wmi_vdev_param_inactivity_cnt, |
| wmi_vdev_param_txsp_end_inactivity_time_ms, |
| wmi_vdev_param_dtim_policy, |
| wmi_vdev_param_ibss_ps_warmup_time_secs, |
| wmi_vdev_param_ibss_ps_1rx_chain_in_atim_window_enable, |
| wmi_vdev_param_rx_leak_window, |
| wmi_vdev_param_stats_avg_factor, |
| wmi_vdev_param_disconnect_th, |
| wmi_vdev_param_rtscts_rate, |
| wmi_vdev_param_mcc_rtscts_protection_enable, |
| wmi_vdev_param_mcc_broadcast_probe_enable, |
| wmi_vdev_param_capabilities, |
| wmi_vdev_param_mgmt_tx_power, |
| wmi_vdev_param_atf_ssid_sched_policy, |
| wmi_vdev_param_disable_dyn_bw_rts, |
| wmi_vdev_param_ampdu_subframe_size_per_ac, |
| wmi_vdev_param_he_dcm_enable, |
| wmi_vdev_param_he_bss_color, |
| wmi_vdev_param_he_range_ext_enable, |
| wmi_vdev_param_set_hemu_mode, |
| wmi_vdev_param_set_he_ltf, |
| wmi_vdev_param_set_heop, |
| wmi_vdev_param_disable_cabq, |
| |
| wmi_vdev_param_rate_dropdown_bmap, |
| wmi_vdev_param_max, |
| } wmi_conv_vdev_param_id; |
| |
| /** |
| * Host based ENUM IDs for service bits to abstract target enums |
| */ |
| typedef enum { |
| wmi_service_beacon_offload = 0, |
| wmi_service_scan_offload, |
| wmi_service_roam_offload, |
| wmi_service_bcn_miss_offload, |
| wmi_service_sta_pwrsave, |
| wmi_service_sta_advanced_pwrsave, |
| wmi_service_ap_uapsd, |
| wmi_service_ap_dfs, |
| wmi_service_11ac, |
| wmi_service_blockack, |
| wmi_service_phyerr, |
| wmi_service_bcn_filter, |
| wmi_service_rtt, |
| wmi_service_ratectrl, |
| wmi_service_wow, |
| wmi_service_ratectrl_cache, |
| wmi_service_iram_tids, |
| wmi_service_burst, |
| wmi_service_smart_antenna_sw_support, |
| wmi_service_gtk_offload, |
| wmi_service_scan_sch, |
| wmi_service_csa_offload, |
| wmi_service_chatter, |
| wmi_service_coex_freqavoid, |
| wmi_service_packet_power_save, |
| wmi_service_force_fw_hang, |
| wmi_service_smart_antenna_hw_support, |
| wmi_service_gpio, |
| wmi_sta_uapsd_basic_auto_trig, |
| wmi_sta_uapsd_var_auto_trig, |
| wmi_service_sta_keep_alive, |
| wmi_service_tx_encap, |
| wmi_service_ap_ps_detect_out_of_sync, |
| wmi_service_early_rx, |
| wmi_service_enhanced_proxy_sta, |
| wmi_service_tt, |
| wmi_service_atf, |
| wmi_service_peer_caching, |
| wmi_service_coex_gpio, |
| wmi_service_aux_spectral_intf, |
| wmi_service_aux_chan_load_intf, |
| wmi_service_bss_channel_info_64, |
| wmi_service_ext_res_cfg_support, |
| wmi_service_mesh, |
| wmi_service_restrt_chnl_support, |
| wmi_service_roam_scan_offload, |
| wmi_service_arpns_offload, |
| wmi_service_nlo, |
| wmi_service_sta_dtim_ps_modulated_dtim, |
| wmi_service_sta_smps, |
| wmi_service_fwtest, |
| wmi_service_sta_wmmac, |
| wmi_service_tdls, |
| wmi_service_mcc_bcn_interval_change, |
| wmi_service_adaptive_ocs, |
| wmi_service_ba_ssn_support, |
| wmi_service_filter_ipsec_natkeepalive, |
| wmi_service_wlan_hb, |
| wmi_service_lte_ant_share_support, |
| wmi_service_batch_scan, |
| wmi_service_qpower, |
| wmi_service_plmreq, |
| wmi_service_thermal_mgmt, |
| wmi_service_rmc, |
| wmi_service_mhf_offload, |
| wmi_service_coex_sar, |
| wmi_service_bcn_txrate_override, |
| wmi_service_nan, |
| wmi_service_l1ss_stat, |
| wmi_service_estimate_linkspeed, |
| wmi_service_obss_scan, |
| wmi_service_tdls_offchan, |
| wmi_service_tdls_uapsd_buffer_sta, |
| wmi_service_tdls_uapsd_sleep_sta, |
| wmi_service_ibss_pwrsave, |
| wmi_service_lpass, |
| wmi_service_extscan, |
| wmi_service_d0wow, |
| wmi_service_hsoffload, |
| wmi_service_roam_ho_offload, |
| wmi_service_rx_full_reorder, |
| wmi_service_dhcp_offload, |
| wmi_service_sta_rx_ipa_offload_support, |
| wmi_service_mdns_offload, |
| wmi_service_sap_auth_offload, |
| wmi_service_dual_band_simultaneous_support, |
| wmi_service_ocb, |
| wmi_service_ap_arpns_offload, |
| wmi_service_per_band_chainmask_support, |
| wmi_service_packet_filter_offload, |
| wmi_service_mgmt_tx_htt, |
| wmi_service_mgmt_tx_wmi, |
| wmi_service_ext_msg, |
| wmi_service_mawc, |
| |
| wmi_service_peer_stats, |
| wmi_service_mesh_11s, |
| wmi_service_periodic_chan_stat_support, |
| wmi_service_tx_mode_push_only, |
| wmi_service_tx_mode_push_pull, |
| wmi_service_tx_mode_dynamic, |
| wmi_service_check_cal_version, |
| wmi_service_btcoex_duty_cycle, |
| wmi_service_4_wire_coex_support, |
| wmi_service_multiple_vdev_restart, |
| wmi_service_peer_assoc_conf, |
| wmi_service_egap, |
| wmi_service_sta_pmf_offload, |
| wmi_service_unified_wow_capability, |
| wmi_service_enterprise_mesh, |
| wmi_service_bpf_offload, |
| wmi_service_sync_delete_cmds, |
| wmi_service_ratectrl_limit_max_min_rates, |
| wmi_service_nan_data, |
| wmi_service_nan_rtt, |
| wmi_service_11ax, |
| wmi_service_deprecated_replace, |
| wmi_service_tdls_conn_tracker_in_host_mode, |
| wmi_service_enhanced_mcast_filter, |
| wmi_service_half_rate_quarter_rate_support, |
| wmi_service_vdev_rx_filter, |
| wmi_service_p2p_listen_offload_support, |
| wmi_service_mark_first_wakeup_packet, |
| wmi_service_multiple_mcast_filter_set, |
| wmi_service_host_managed_rx_reorder, |
| wmi_service_flash_rdwr_support, |
| wmi_service_wlan_stats_report, |
| wmi_service_tx_msdu_id_new_partition_support, |
| wmi_service_dfs_phyerr_offload, |
| wmi_service_rcpi_support, |
| wmi_service_fw_mem_dump_support, |
| wmi_service_peer_stats_info, |
| wmi_service_regulatory_db, |
| wmi_service_11d_offload, |
| wmi_service_hw_data_filtering, |
| wmi_service_pkt_routing, |
| wmi_service_offchan_tx_wmi, |
| wmi_service_chan_load_info, |
| wmi_service_extended_nss_support, |
| wmi_service_ack_timeout, |
| wmi_service_widebw_scan, |
| wmi_service_bcn_offload_start_stop_support, |
| wmi_service_offchan_data_tid_support, |
| wmi_service_support_dma, |
| |
| wmi_services_max, |
| } wmi_conv_service_ids; |
| #define WMI_SERVICE_UNAVAILABLE 0xFFFF |
| |
| /** |
| * enum WMI_DBG_PARAM - Debug params |
| * @WMI_DBGLOG_LOG_LEVEL: Set the loglevel |
| * @WMI_DBGLOG_VAP_ENABLE: Enable VAP level debug |
| * @WMI_DBGLOG_VAP_DISABLE: Disable VAP level debug |
| * @WMI_DBGLOG_MODULE_ENABLE: Enable MODULE level debug |
| * @WMI_DBGLOG_MODULE_DISABLE: Disable MODULE level debug |
| * @WMI_DBGLOG_MOD_LOG_LEVEL: Enable MODULE level debug |
| * @WMI_DBGLOG_TYPE: set type of the debug output |
| * @WMI_DBGLOG_REPORT_ENABLE: Enable Disable debug |
| */ |
| typedef enum { |
| WMI_DBGLOG_LOG_LEVEL = 0x1, |
| WMI_DBGLOG_VAP_ENABLE, |
| WMI_DBGLOG_VAP_DISABLE, |
| WMI_DBGLOG_MODULE_ENABLE, |
| WMI_DBGLOG_MODULE_DISABLE, |
| WMI_DBGLOG_MOD_LOG_LEVEL, |
| WMI_DBGLOG_TYPE, |
| WMI_DBGLOG_REPORT_ENABLE |
| } WMI_DBG_PARAM; |
| |
| /** |
| * struct wmi_host_fw_ver - FW version in non-tlv target |
| * @sw_version: Versin info |
| * @sw_version_1: Second dword of version |
| */ |
| struct wmi_host_fw_ver { |
| uint32_t sw_version; |
| uint32_t sw_version_1; |
| }; |
| |
| /** |
| * struct wmi_host_fw_abi_ver - FW version in non-tlv target |
| * @sw_version: Versin info |
| * @abi_version: ABI version |
| */ |
| struct wmi_host_fw_abi_ver { |
| uint32_t sw_version; |
| uint32_t abi_version; |
| }; |
| |
| /** |
| * struct target_resource_config - Resource config sent from host to target |
| * abstracted out to include union of both configs |
| * @num_vdevs: Number vdevs configured |
| * @num_peers: Number of peers |
| * @num_active_peers: Number of active peers for peer cache |
| * @num_offload_peers: Number of offload peers |
| * @num_offload_reorder_buffs: number of offload reorder buffs |
| * @num_peer_keys: number of peer keys |
| * @num_tids: number of tids |
| * @ast_skid_limit: AST skid limit |
| * @tx_chain_mask: TX chain mask |
| * @rx_chain_mask: RX chain mask |
| * @rx_timeout_pri: RX reorder timeout per AC |
| * @rx_decap_mode: RX decap mode |
| * @scan_max_pending_req: Scan mac pending req |
| * @bmiss_offload_max_vdev: Beacom miss offload max vdevs |
| * @roam_offload_max_vdev: Roam offload max vdevs |
| * @roam_offload_max_ap_profiles: roam offload max ap profiles |
| * @num_mcast_groups: num mcast groups |
| * @num_mcast_table_elems: number of macst table elems |
| * @mcast2ucast_mode: mcast enhance mode |
| * @tx_dbg_log_size: DBG log buf size |
| * @num_wds_entries: number of WDS entries |
| * @dma_burst_size: DMA burst size. |
| * @mac_aggr_delim: Mac aggr delim |
| * @rx_skip_defrag_timeout_dup_detection_check: Defrag dup check in host? |
| * @vow_config: vow configuration |
| * @gtk_offload_max_vdev: Max vdevs for GTK offload |
| * @num_msdu_desc: Number of msdu desc |
| * @max_frag_entries: Max frag entries |
| * End common |
| * @max_peer_ext_stats: Max peer EXT stats |
| * @smart_ant_cap: Smart antenna capabilities |
| * @BK_Minfree: BIN configuration for BK traffic |
| * @BE_Minfree: BIN configuration for BE traffic |
| * @VI_Minfree: BIN configuration for VI traffic |
| * @VO_Minfree: BIN configuration for VO traffic |
| * @rx_batchmode: RX batch mode |
| * @tt_support: Thermal throttling support |
| * @atf_config: ATF config |
| * @mgmt_comp_evt_bundle_support: bundle support required for mgmt complete evt |
| * @tx_msdu_new_partition_id_support: new partiition id support for tx msdu |
| * @iphdr_pad_config: ipheader pad config |
| * @qwrap_config: Qwrap configuration |
| * @alloc_frag_desc_for_data_pkt: Frag desc for data |
| * Added in MCL |
| * @num_tdls_vdevs: |
| * @num_tdls_conn_table_entries: |
| * @beacon_tx_offload_max_vdev: |
| * @num_multicast_filter_entries: |
| * @num_wow_filters: |
| * @num_keep_alive_pattern: |
| * @keep_alive_pattern_size: |
| * @max_tdls_concurrent_sleep_sta: |
| * @max_tdls_concurrent_buffer_sta: |
| * @wmi_send_separate: |
| * @num_ocb_vdevs: |
| * @num_ocb_channels: |
| * @num_ocb_schedules: |
| * @num_ns_ext_tuples_cfg: |
| * @bpf_instruction_size: |
| * @max_bssid_rx_filters: |
| * @use_pdev_id: |
| * @max_num_dbs_scan_duty_cycle: max dbs can duty cycle value |
| * @cce_disable: disable cce component |
| */ |
| typedef struct { |
| uint32_t num_vdevs; |
| uint32_t num_peers; |
| uint32_t num_active_peers; |
| uint32_t num_offload_peers; |
| uint32_t num_offload_reorder_buffs; |
| uint32_t num_peer_keys; |
| uint32_t num_tids; |
| uint32_t ast_skid_limit; |
| uint32_t tx_chain_mask; |
| uint32_t rx_chain_mask; |
| uint32_t rx_timeout_pri[4]; |
| uint32_t rx_decap_mode; |
| uint32_t scan_max_pending_req; |
| uint32_t bmiss_offload_max_vdev; |
| uint32_t roam_offload_max_vdev; |
| uint32_t roam_offload_max_ap_profiles; |
| uint32_t num_mcast_groups; |
| uint32_t num_mcast_table_elems; |
| uint32_t mcast2ucast_mode; |
| uint32_t tx_dbg_log_size; |
| uint32_t num_wds_entries; |
| uint32_t dma_burst_size; |
| uint32_t mac_aggr_delim; |
| uint32_t rx_skip_defrag_timeout_dup_detection_check; |
| uint32_t vow_config; |
| uint32_t gtk_offload_max_vdev; |
| uint32_t num_msdu_desc; /* Number of msdu desc */ |
| uint32_t max_frag_entries; |
| uint32_t scheduler_params; |
| /* End common */ |
| |
| /* Added for Beeliner */ |
| uint32_t max_peer_ext_stats; |
| uint32_t smart_ant_cap; |
| uint32_t BK_Minfree; |
| uint32_t BE_Minfree; |
| uint32_t VI_Minfree; |
| uint32_t VO_Minfree; |
| uint32_t rx_batchmode; |
| uint32_t tt_support; |
| uint32_t atf_config:1, |
| mgmt_comp_evt_bundle_support:1, |
| tx_msdu_new_partition_id_support:1; |
| uint32_t iphdr_pad_config; |
| uint32_t |
| qwrap_config:16, |
| alloc_frag_desc_for_data_pkt:16; |
| |
| /* Added in MCL */ |
| uint32_t num_tdls_vdevs; |
| uint32_t num_tdls_conn_table_entries; |
| uint32_t beacon_tx_offload_max_vdev; |
| uint32_t num_multicast_filter_entries; |
| uint32_t num_wow_filters; |
| uint32_t num_keep_alive_pattern; |
| uint32_t keep_alive_pattern_size; |
| uint32_t max_tdls_concurrent_sleep_sta; |
| uint32_t max_tdls_concurrent_buffer_sta; |
| uint32_t wmi_send_separate; |
| uint32_t num_ocb_vdevs; |
| uint32_t num_ocb_channels; |
| uint32_t num_ocb_schedules; |
| uint32_t num_ns_ext_tuples_cfg; |
| uint32_t bpf_instruction_size; |
| uint32_t max_bssid_rx_filters; |
| uint32_t use_pdev_id; |
| uint32_t max_num_dbs_scan_duty_cycle; |
| bool cce_disable; |
| } target_resource_config; |
| |
| /** |
| * struct wds_addr_event - WDS addr event structure |
| * @event_type: event type add/delete |
| * @peer_mac: peer mac |
| * @dest_mac: destination mac address |
| * @vdev_id: vdev id |
| */ |
| typedef struct { |
| uint32_t event_type[4]; |
| u_int8_t peer_mac[IEEE80211_ADDR_LEN]; |
| u_int8_t dest_mac[IEEE80211_ADDR_LEN]; |
| uint32_t vdev_id; |
| } wds_addr_event_t; |
| /** |
| * Enum replicated for host abstraction with FW |
| */ |
| typedef enum { |
| /* Event respose of START CMD */ |
| WMI_HOST_VDEV_START_RESP_EVENT = 0, |
| /* Event respose of RESTART CMD */ |
| WMI_HOST_VDEV_RESTART_RESP_EVENT, |
| } WMI_HOST_START_EVENT_PARAM; |
| |
| /** |
| * struct wmi_host_vdev_start_resp - VDEV start response |
| * @vdev_id: vdev id |
| * @requestor_id: requestor id that requested the VDEV start request |
| * @resp_type: Respose of Event type START/RESTART |
| * @status: status of the response |
| * @chain_mask: Vdev chain mask |
| * @smps_mode: Vdev mimo power save mode |
| * @mac_id: mac_id field contains the MAC identifier that the |
| * VDEV is bound to. The valid range is 0 to (num_macs-1). |
| * @cfgd_tx_streams: Configured Transmit Streams |
| * @cfgd_rx_streams: Configured Receive Streams |
| */ |
| typedef struct { |
| uint32_t vdev_id; |
| uint32_t requestor_id; |
| WMI_HOST_START_EVENT_PARAM resp_type; |
| uint32_t status; |
| uint32_t chain_mask; |
| uint32_t smps_mode; |
| uint32_t mac_id; |
| uint32_t cfgd_tx_streams; |
| uint32_t cfgd_rx_streams; |
| } wmi_host_vdev_start_resp; |
| |
| /** |
| * struct wmi_host_vdev_delete_resp - VDEV delete response |
| * @vdev_id: vdev id |
| */ |
| struct wmi_host_vdev_delete_resp { |
| uint32_t vdev_id; |
| }; |
| |
| /** |
| * struct wmi_host_roam_event - host roam event param |
| * @vdev_id: vdev id |
| * @reason: roam reason |
| * @rssi: RSSI |
| */ |
| typedef struct { |
| uint32_t vdev_id; |
| uint32_t reason; |
| uint32_t rssi; |
| } wmi_host_roam_event; |
| |
| /** |
| * ENUM wmi_host_scan_event_type - Scan event type |
| */ |
| enum wmi_host_scan_event_type { |
| WMI_HOST_SCAN_EVENT_STARTED = 0x1, |
| WMI_HOST_SCAN_EVENT_COMPLETED = 0x2, |
| WMI_HOST_SCAN_EVENT_BSS_CHANNEL = 0x4, |
| WMI_HOST_SCAN_EVENT_FOREIGN_CHANNEL = 0x8, |
| WMI_HOST_SCAN_EVENT_DEQUEUED = 0x10, |
| WMI_HOST_SCAN_EVENT_PREEMPTED = 0x20, |
| WMI_HOST_SCAN_EVENT_START_FAILED = 0x40, |
| WMI_HOST_SCAN_EVENT_RESTARTED = 0x80, |
| WMI_HOST_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = 0x100, |
| WMI_HOST_SCAN_EVENT_INVALID = 0x200, |
| WMI_HOST_SCAN_EVENT_GPIO_TIMEOUT = 0x400, |
| WMI_HOST_SCAN_EVENT_MAX = 0x8000 |
| }; |
| |
| /** |
| * ENUM wmi_host_scan_completion_reason - Scan completion event type |
| */ |
| enum wmi_host_scan_completion_reason { |
| /** scan related events */ |
| WMI_HOST_SCAN_REASON_NONE = 0xFF, |
| WMI_HOST_SCAN_REASON_COMPLETED = 0, |
| WMI_HOST_SCAN_REASON_CANCELLED = 1, |
| WMI_HOST_SCAN_REASON_PREEMPTED = 2, |
| WMI_HOST_SCAN_REASON_TIMEDOUT = 3, |
| WMI_HOST_SCAN_REASON_INTERNAL_FAILURE = 4, |
| WMI_HOST_SCAN_REASON_MAX, |
| }; |
| |
| /** |
| * struct wmi_host_scan_event - Scan event response from target |
| * @event: event type |
| * @reason: Reason for event |
| * @channel_freq: channel frequency |
| * @requestor: requestor id |
| * @scan_id: scan id |
| * @vdev_id: vdev id |
| */ |
| typedef struct { |
| uint32_t event; |
| uint32_t reason; |
| uint32_t channel_freq; |
| uint32_t requestor; |
| uint32_t scan_id; |
| uint32_t vdev_id; |
| } wmi_host_scan_event; |
| |
| /** |
| * struct wmi_host_pdev_reserve_ast_entry_event - Reserve AST entry |
| * @result: result |
| */ |
| typedef struct { |
| uint32_t result; |
| } wmi_host_pdev_reserve_ast_entry_event; |
| |
| /** |
| * struct wmi_host_mcast_ageout_entry - mcast aged-out entry |
| * @grp_addr: IPv4/6 mcast group addr |
| * @vdev_id: vdev id |
| */ |
| typedef struct { |
| uint8_t grp_addr[16]; |
| uint32_t vdev_id; |
| } wmi_host_mcast_ageout_entry; |
| |
| /** |
| * struct wmi_host_mcast_list_ageout_event - List of mcast entry aged-out |
| * @num_entry: Number of mcast entries timed-out |
| * @entry: List of wmi_host_mcast_ageout_entry |
| */ |
| typedef struct { |
| uint32_t num_entry; |
| wmi_host_mcast_ageout_entry entry[1]; |
| } wmi_host_mcast_list_ageout_event; |
| |
| /** |
| * struct wmi_host_pdev_nfcal_power_all_channels_event - NF cal event data |
| * @nfdBr: |
| * chan0: {NFCalPower_chain0, NFCalPower_chain1, |
| * NFCalPower_chain2, NFCalPower_chain3}, |
| * chan1: {NFCalPower_chain0, NFCalPower_chain1, |
| * NFCalPower_chain2, NFCalPower_chain3}, |
| * chan2: {NFCalPower_chain0, NFCalPower_chain1, |
| * NFCalPower_chain2, NFCalPower_chain3}, |
| * chan3: {NFCalPower_chain0, NFCalPower_chain1, |
| * NFCalPower_chain2, NFCalPower_chain3}, |
| * @nfdBr: |
| * chan0: {NFCalPower_chain0, NFCalPower_chain1, |
| * NFCalPower_chain2, NFCalPower_chain3}, |
| * chan1: {NFCalPower_chain0, NFCalPower_chain1, |
| * NFCalPower_chain2, NFCalPower_chain3}, |
| * chan2: {NFCalPower_chain0, NFCalPower_chain1, |
| * NFCalPower_chain2, NFCalPower_chain3}, |
| * chan3: {NFCalPower_chain0, NFCalPower_chain1, |
| * NFCalPower_chain2, NFCalPower_chain3}, |
| * @freqNum: frequency number |
| * @pdev_id: pdev_id |
| */ |
| typedef struct { |
| int8_t nfdBr[WMI_HOST_RXG_CAL_CHAN_MAX * WMI_HOST_MAX_NUM_CHAINS]; |
| int8_t nfdBm[WMI_HOST_RXG_CAL_CHAN_MAX * WMI_HOST_MAX_NUM_CHAINS]; |
| uint32_t freqNum[WMI_HOST_RXG_CAL_CHAN_MAX]; |
| uint32_t pdev_id; |
| } wmi_host_pdev_nfcal_power_all_channels_event; |
| |
| /** |
| * enum wmi_host_pdev_tpc_event_offset: offsets of TPC events |
| * @WMI_HOST_TX_POWER_MAX: offset of max tx power |
| * @WMI_HOST_TX_POWER_MIN: offset of min tx power |
| * @WMI_HOST_TX_POWER_LEN: size of tpc values |
| */ |
| enum wmi_host_pdev_tpc_event_offset { |
| WMI_HOST_TX_POWER_MAX, |
| WMI_HOST_TX_POWER_MIN, |
| WMI_HOST_TX_POWER_LEN, |
| }; |
| |
| /** |
| * struct wmi_host_pdev_tpc_event - WMI host pdev TPC event |
| * @pdev_id: pdev_id |
| * @tpc: |
| */ |
| typedef struct { |
| uint32_t pdev_id; |
| int32_t tpc[WMI_HOST_TX_POWER_LEN]; |
| } wmi_host_pdev_tpc_event; |
| |
| /** |
| * struct wmi_host_pdev_generic_buffer_event |
| * @buf_type: Buffer type |
| * @frag_id: Frag id |
| * @more_frag: more frags pending |
| * @buf_len: buffer length |
| * @buf_info: variable length buffer |
| */ |
| typedef struct { |
| uint32_t buf_type; |
| uint32_t frag_id; |
| uint32_t more_frag; |
| uint32_t buf_len; |
| uint32_t buf_info[1]; |
| } wmi_host_pdev_generic_buffer_event; |
| /** |
| * Enum for host buffer event |
| */ |
| enum { |
| WMI_HOST_BUFFER_TYPE_RATEPWR_TABLE, |
| WMI_HOST_BUFFER_TYPE_CTL_TABLE, |
| }; |
| |
| /** |
| * struct wmi_host_pdev_tpc_config_event - host pdev tpc config event |
| * @pdev_id: pdev_id |
| * @regDomain: |
| * @chanFreq: |
| * @phyMode: |
| * @twiceAntennaReduction: |
| * @twiceMaxRDPower: |
| * @twiceAntennaGain: |
| * @powerLimit: |
| * @rateMax: |
| * @numTxChain: |
| * @ctl: |
| * @flags: |
| * @maxRegAllowedPower: |
| * @maxRegAllowedPowerAGCDD: |
| * @maxRegAllowedPowerAGSTBC: |
| * @maxRegAllowedPowerAGTXBF: |
| * @ratesArray: |
| */ |
| typedef struct { |
| uint32_t pdev_id; |
| uint32_t regDomain; |
| uint32_t chanFreq; |
| uint32_t phyMode; |
| uint32_t twiceAntennaReduction; |
| uint32_t twiceMaxRDPower; |
| int32_t twiceAntennaGain; |
| uint32_t powerLimit; |
| uint32_t rateMax; |
| uint32_t numTxChain; |
| uint32_t ctl; |
| uint32_t flags; |
| int8_t maxRegAllowedPower[WMI_HOST_TPC_TX_NUM_CHAIN]; |
| int8_t maxRegAllowedPowerAGCDD[WMI_HOST_TPC_TX_NUM_CHAIN][WMI_HOST_TPC_TX_NUM_CHAIN]; |
| int8_t maxRegAllowedPowerAGSTBC[WMI_HOST_TPC_TX_NUM_CHAIN][WMI_HOST_TPC_TX_NUM_CHAIN]; |
| int8_t maxRegAllowedPowerAGTXBF[WMI_HOST_TPC_TX_NUM_CHAIN][WMI_HOST_TPC_TX_NUM_CHAIN]; |
| uint8_t ratesArray[WMI_HOST_TPC_RATE_MAX]; |
| } wmi_host_pdev_tpc_config_event; |
| /** |
| * Enums for TPC event |
| */ |
| typedef enum { |
| WMI_HOST_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1, |
| WMI_HOST_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2, |
| WMI_HOST_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4, |
| } WMI_HOST_TPC_CONFIG_EVENT_FLAG; |
| |
| /** |
| * Medium Utilization evaluation algorithms |
| * These algorithms can be complementary rather than exclusive. |
| */ |
| typedef enum { |
| WMI_HOST_MU_BASIC_ALGO = 0x1, |
| WMI_HOST_MU_PER_BSSID_ALGO = 0x2, |
| WMI_HOST_MU_HIDDEN_NODE_ALGO = 0x4, |
| } WMI_HOST_MU_ALGO_TYPE; |
| /* max MU alg combinations supported by target */ |
| #define WMI_HOST_MU_MAX_ALGO_TYPE 3 |
| |
| /** |
| * struct wmi_host_mu_db_entry |
| * @event_type: 0=AP, 1=STA, 2=Small Cell(SC) |
| * @bssid_mac_addr: Transmitter MAC if entry is WiFi node. PLMNID if SC |
| * @tx_addr: Transmitter MAC if entry is WiFi node. PLMNID if SC |
| * @avg_duration_us: Avg. duration for which node was transmitting |
| * @avg_rssi: Avg. RSSI of all TX packets by node. Unit dBm |
| * @mu_percent: % medium utilization by node |
| */ |
| typedef struct { |
| uint32_t entry_type; |
| wmi_host_mac_addr bssid_mac_addr; |
| wmi_host_mac_addr tx_addr; |
| uint32_t avg_duration_us; |
| uint32_t avg_rssi; |
| uint32_t mu_percent; |
| } wmi_host_mu_db_entry; |
| |
| /** |
| * struct wmi_host_mu_report_event - WMI_MU_REPORT_EVENTID |
| * @mu_request_id: request id |
| * @status_reason: MU_STATUS_REASON |
| * @total_mu: MU_ALG_TYPE combinations |
| * @num_active_bssid: number of active bssid |
| * @hidden_node_mu : hidden node algo MU per bin |
| * @num_TA_entries : No. of entries found in MU db report |
| */ |
| typedef struct { |
| uint32_t mu_request_id; |
| uint32_t status_reason; |
| uint32_t total_mu[WMI_HOST_MU_MAX_ALGO_TYPE]; |
| uint32_t num_active_bssid; |
| uint32_t hidden_node_mu[LTEU_MAX_BINS]; |
| uint32_t num_TA_entries; |
| } wmi_host_mu_report_event; |
| |
| /** |
| * struct wmi_host_mgmt_tx_compl_event - TX completion event |
| * @desc_id: from tx_send_cmd |
| * @status: WMI_MGMT_TX_COMP_STATUS_TYPE |
| * @pdev_id: pdev_id |
| */ |
| typedef struct { |
| uint32_t desc_id; |
| uint32_t status; |
| uint32_t pdev_id; |
| } wmi_host_mgmt_tx_compl_event; |
| |
| /** |
| * struct wmi_host_offchan_data_tx_compl_event - TX completion event |
| * @desc_id: from tx_send_cmd |
| * @status: VWMI_MGMT_TX_COMP_STATUS_TYPE |
| * @pdev_id: pdev_id |
| */ |
| struct wmi_host_offchan_data_tx_compl_event { |
| uint32_t desc_id; |
| uint32_t status; |
| uint32_t pdev_id; |
| }; |
| |
| #define WMI_HOST_TIM_BITMAP_ARRAY_SIZE 17 |
| |
| /** |
| * struct wmi_host_tim_info - TIM info in SWBA event |
| * @tim_len: TIM length |
| * @tim_mcast: |
| * @tim_bitmap: TIM bitmap |
| * @tim_changed: TIM changed |
| * @tim_num_ps_pending: TIM num PS sta pending |
| * @vdev_id: Vdev id |
| */ |
| typedef struct { |
| uint32_t tim_len; |
| uint32_t tim_mcast; |
| uint32_t tim_bitmap[WMI_HOST_TIM_BITMAP_ARRAY_SIZE]; |
| uint32_t tim_changed; |
| uint32_t tim_num_ps_pending; |
| uint32_t vdev_id; |
| } wmi_host_tim_info; |
| |
| /** |
| * struct wmi_host_p2p_noa_descriptor - NoA desc in SWBA event |
| * @type_count: Absence count |
| * @duration: NoA duration |
| * @interval: NoA interval |
| * @start_time: start time |
| */ |
| typedef struct { |
| uint32_t type_count; |
| uint32_t duration; |
| uint32_t interval; |
| uint32_t start_time; |
| } wmi_host_p2p_noa_descriptor; |
| /* Maximum number of NOA Descriptors supported */ |
| #define WMI_HOST_P2P_MAX_NOA_DESCRIPTORS 4 |
| /** |
| * struct wmi_host_p2p_noa_info - p2p noa information |
| * @modified: NoA modified |
| * @index: Index |
| * @oppPS: Oppurtunstic ps |
| * @ctwindow: CT window |
| * @num_descriptors: number of descriptors |
| * @noa_descriptors: noa descriptors |
| * @vdev_id: Vdev id |
| */ |
| typedef struct { |
| uint8_t modified; |
| uint8_t index; |
| uint8_t oppPS; |
| uint8_t ctwindow; |
| uint8_t num_descriptors; |
| wmi_host_p2p_noa_descriptor |
| noa_descriptors[WMI_HOST_P2P_MAX_NOA_DESCRIPTORS]; |
| uint32_t vdev_id; |
| } wmi_host_p2p_noa_info; |
| |
| /** |
| * struct wmi_host_peer_sta_kickout_event |
| * @peer_macaddr: peer mac address |
| * @reason: kickout reason |
| * @rssi: rssi |
| * @pdev_id: pdev_id |
| */ |
| typedef struct { |
| uint8_t peer_macaddr[IEEE80211_ADDR_LEN]; |
| uint32_t reason; |
| uint32_t rssi; |
| } wmi_host_peer_sta_kickout_event; |
| |
| /** |
| * struct wmi_host_peer_sta_ps_statechange_event - ST ps state change event |
| * @peer_macaddr: peer mac address |
| * @peer_ps_stats: peer PS state |
| * @pdev_id: pdev_id |
| */ |
| typedef struct { |
| uint8_t peer_macaddr[IEEE80211_ADDR_LEN]; |
| uint32_t peer_ps_state; |
| } wmi_host_peer_sta_ps_statechange_event; |
| |
| /* Maximum CCK, OFDM rates supported */ |
| #define WMI_SA_MAX_CCK_OFDM_RATES 12 |
| /* Maximum MCS rates supported; 4 rates in each dword */ |
| #define WMI_SA_MAX_MCS_RATES 40 |
| #define WMI_SA_MAX_RATE_COUNTERS 4 |
| /* Maximum rate series used for transmission */ |
| #define SA_MAX_RATE_SERIES 2 |
| |
| #define SA_MAX_LEGACY_RATE_DWORDS 3 |
| #define SA_MAX_HT_RATE_DWORDS 10 |
| #define SA_BYTES_IN_DWORD 4 |
| #define SA_MASK_BYTE 0xff |
| /* TODO: ratecode_160 needs to add for future chips */ |
| /** |
| * struct wmi_sa_rate_cap - smart antenna rat capabilities |
| * @pdev_id: pdev_id |
| * @ratecode_legacy: Rate code array for CCK OFDM |
| * @ratecode_20: Rate code array for 20MHz BW |
| * @ratecode_40: Rate code array for 40MHz BW |
| * @ratecode_80: Rate code array for 80MHz BW |
| * @ratecount: Max Rate count for each mode |
| */ |
| typedef struct { |
| uint8_t ratecode_legacy[WMI_SA_MAX_CCK_OFDM_RATES]; |
| uint8_t ratecode_20[WMI_SA_MAX_MCS_RATES]; |
| uint8_t ratecode_40[WMI_SA_MAX_MCS_RATES]; |
| uint8_t ratecode_80[WMI_SA_MAX_MCS_RATES]; |
| uint8_t ratecount[WMI_SA_MAX_RATE_COUNTERS]; |
| } wmi_sa_rate_cap; |
| |
| /** Preamble types to be used with VDEV fixed rate configuration */ |
| typedef enum { |
| WMI_HOST_RATE_PREAMBLE_OFDM, |
| WMI_HOST_RATE_PREAMBLE_CCK, |
| WMI_HOST_RATE_PREAMBLE_HT, |
| WMI_HOST_RATE_PREAMBLE_VHT, |
| WMI_HOST_RATE_PREAMBLE_HE, |
| } WMI_HOST_RATE_PREAMBLE; |
| |
| #define WMI_HOST_FIXED_RATE_NONE (0xff) |
| |
| /** slot time long */ |
| #define WMI_HOST_VDEV_SLOT_TIME_LONG 0x1 |
| /** slot time short */ |
| #define WMI_HOST_VDEV_SLOT_TIME_SHORT 0x2 |
| /** preablbe long */ |
| #define WMI_HOST_VDEV_PREAMBLE_LONG 0x1 |
| /** preablbe short */ |
| #define WMI_HOST_VDEV_PREAMBLE_SHORT 0x2 |
| /** found a better AP */ |
| #define WMI_HOST_ROAM_REASON_BETTER_AP 0x1 |
| /** beacon miss detected */ |
| #define WMI_HOST_ROAM_REASON_BMISS 0x2 |
| /** deauth/disassoc received */ |
| #define WMI_HOST_ROAM_REASON_DEAUTH 0x2 |
| /** connected AP's low rssi condition detected */ |
| #define WMI_HOST_ROAM_REASON_LOW_RSSI 0x3 |
| /** found another AP that matches SSID and Security profile in |
| * WMI_ROAM_AP_PROFILE, found during scan triggered upon FINAL_BMISS |
| */ |
| #define WMI_HOST_ROAM_REASON_SUITABLE_AP 0x4 |
| /** LFR3.0 roaming failed, indicate the disconnection to host */ |
| #define WMI_HOST_ROAM_REASON_HO_FAILED 0x5 |
| |
| /** values for vdev_type */ |
| #define WMI_HOST_VDEV_TYPE_AP 0x1 |
| #define WMI_HOST_VDEV_TYPE_STA 0x2 |
| #define WMI_HOST_VDEV_TYPE_IBSS 0x3 |
| #define WMI_HOST_VDEV_TYPE_MONITOR 0x4 |
| |
| /** values for vdev_subtype */ |
| #define WMI_HOST_VDEV_SUBTYPE_P2P_DEVICE 0x1 |
| #define WMI_HOST_VDEV_SUBTYPE_P2P_CLIENT 0x2 |
| #define WMI_HOST_VDEV_SUBTYPE_P2P_GO 0x3 |
| #define WMI_HOST_VDEV_SUBTYPE_PROXY_STA 0x4 |
| #define WMI_HOST_VDEV_SUBTYPE_MESH 0x5 |
| |
| #define WMI_HOST_MGMT_TID 17 |
| /* Disable aging & learning */ |
| #define WMI_HOST_WDS_FLAG_STATIC 0x1 |
| |
| /** |
| * Peer param enum abstracted from target |
| */ |
| typedef enum { |
| /** mimo powersave state */ |
| WMI_HOST_PEER_MIMO_PS_STATE = 0x1, |
| /** enable/disable AMPDU . initial value (enabled) */ |
| WMI_HOST_PEER_AMPDU = 0x2, |
| /** authorize/unauthorize peer. initial value is unauthorized (0) */ |
| WMI_HOST_PEER_AUTHORIZE = 0x3, |
| /** peer channel bandwidth */ |
| WMI_HOST_PEER_CHWIDTH = 0x4, |
| /** peer NSS */ |
| WMI_HOST_PEER_NSS = 0x5, |
| /** USE 4 ADDR */ |
| WMI_HOST_PEER_USE_4ADDR = 0x6, |
| /** Enable extended peer stats */ |
| WMI_HOST_PEER_EXT_STATS_ENABLE = 0x7, |
| /*Use FIXED Pwr */ |
| WMI_HOST_PEER_USE_FIXED_PWR = 0x8, |
| /* Set peer fixed rate */ |
| WMI_HOST_PEER_PARAM_FIXED_RATE = 0x9, |
| /* Whitelist peer TIDs */ |
| WMI_HOST_PEER_SET_MU_WHITELIST = 0xa, |
| /* set group membership status */ |
| WMI_HOST_PEER_MEMBERSHIP = 0xb, |
| WMI_HOST_PEER_USERPOS = 0xc, |
| WMI_HOST_PEER_CRIT_PROTO_HINT_ENABLED = 0xd, |
| WMI_HOST_PEER_TX_FAIL_CNT_THR = 0xe, |
| WMI_HOST_PEER_SET_HW_RETRY_CTS2S = 0xf, |
| WMI_HOST_PEER_IBSS_ATIM_WINDOW_LENGTH = 0x10, |
| WMI_HOST_PEER_PHYMODE = 0x11, |
| WMI_HOST_PEER_SET_MAC_TX_RATE = 0x12, |
| /* Set default Rx routing */ |
| WMI_HOST_PEER_SET_DEFAULT_ROUTING = 0x13, |
| WMI_HOST_PEER_SET_MIN_TX_RATE = 0x14, |
| /* peer NSS for 160Mhx */ |
| WMI_HOST_PEER_NSS_VHT160 = 0x15, |
| /* peer NSS for 160Mhx */ |
| WMI_HOST_PEER_NSS_VHT80_80 = 0x16, |
| } PEER_PARAM_ENUM; |
| #define WMI_HOST_PEER_MIMO_PS_NONE 0x0 |
| #define WMI_HOST_PEER_MIMO_PS_STATIC 0x1 |
| #define WMI_HOST_PEER_MIMO_PS_DYNAMIC 0x2 |
| typedef enum { |
| HOST_PLATFORM_HIGH_PERF, |
| HOST_PLATFORM_LOW_PERF, |
| HOST_PLATFORM_LOW_PERF_NO_FETCH, |
| } HOST_PLATFORM_TYPE; |
| |
| enum wmi_host_sta_ps_mode { |
| /** enable power save for the given STA VDEV */ |
| WMI_HOST_STA_PS_MODE_DISABLED = 0, |
| /** disable power save for a given STA VDEV */ |
| WMI_HOST_STA_PS_MODE_ENABLED = 1, |
| }; |
| enum wmi_host_sta_powersave_param { |
| /** |
| * Controls how frames are retrievd from AP while STA is sleeping |
| * |
| * (see enum wmi_sta_ps_param_rx_wake_policy) |
| */ |
| WMI_HOST_STA_PS_PARAM_RX_WAKE_POLICY = 0, |
| |
| /** |
| * The STA will go active after this many TX |
| * |
| * (see enum wmi_sta_ps_param_tx_wake_threshold) |
| */ |
| WMI_HOST_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1, |
| |
| /** |
| * Number of PS-Poll to send before STA wakes up |
| * |
| * (see enum wmi_sta_ps_param_pspoll_count) |
| * |
| */ |
| WMI_HOST_STA_PS_PARAM_PSPOLL_COUNT = 2, |
| |
| /** |
| * TX/RX inactivity time in msec before going to sleep. |
| * |
| * The power save SM will monitor tx/rx activity on the VDEV, if no |
| * activity for the specified msec of the parameter |
| * the Power save SM will go to sleep. |
| */ |
| WMI_HOST_STA_PS_PARAM_INACTIVITY_TIME = 3, |
| |
| /** |
| * Set uapsd configuration. |
| * |
| * (see enum wmi_sta_ps_param_uapsd) |
| */ |
| WMI_HOST_STA_PS_PARAM_UAPSD = 4, |
| }; |
| /* prefix used by scan requestor ids on the host |
| * replicated here form wmi_unified.h*/ |
| #define WMI_HOST_P_SCAN_REQUESTOR_ID_PREFIX 0xA000 |
| /* prefix used by scan request ids generated on the host */ |
| /* host cycles through the lower 12 bits to generate ids */ |
| #define WMI_HOST_P_SCAN_REQ_ID_PREFIX 0xA000 |
| |
| #define WMI_HOST_RC_DS_FLAG 0x01 /* Dual stream flag */ |
| #define WMI_HOST_RC_CW40_FLAG 0x02 /* CW 40 */ |
| #define WMI_HOST_RC_SGI_FLAG 0x04 /* Short Guard Interval */ |
| #define WMI_HOST_RC_HT_FLAG 0x08 /* HT */ |
| #define WMI_HOST_RC_RTSCTS_FLAG 0x10 /* RTS-CTS */ |
| #define WMI_HOST_RC_TX_STBC_FLAG 0x20 /* TX STBC */ |
| #define WMI_HOST_RC_RX_STBC_FLAG 0xC0 /* RX STBC ,2 bits */ |
| #define WMI_HOST_RC_RX_STBC_FLAG_S 6 /* RX STBC ,2 bits */ |
| #define WMI_HOST_RC_WEP_TKIP_FLAG 0x100 /* WEP/TKIP encryption */ |
| #define WMI_HOST_RC_TS_FLAG 0x200 /* Three stream flag */ |
| #define WMI_HOST_RC_UAPSD_FLAG 0x400 /* UAPSD Rate Control */ |
| |
| /** HT Capabilities*/ |
| #define WMI_HOST_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */ |
| /* Short Guard Interval with HT20 */ |
| #define WMI_HOST_HT_CAP_HT20_SGI 0x0002 |
| #define WMI_HOST_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */ |
| #define WMI_HOST_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */ |
| #define WMI_HOST_HT_CAP_TX_STBC_MASK_SHIFT 3 |
| #define WMI_HOST_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */ |
| #define WMI_HOST_HT_CAP_RX_STBC_MASK_SHIFT 4 |
| #define WMI_HOST_HT_CAP_LDPC 0x0040 /* LDPC supported */ |
| #define WMI_HOST_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */ |
| #define WMI_HOST_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */ |
| #define WMI_HOST_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8 |
| #define WMI_HOST_HT_CAP_HT40_SGI 0x0800 |
| #define WMI_HOST_HT_CAP_RX_LDPC 0x1000 |
| #define WMI_HOST_HT_CAP_TX_LDPC 0x2000 |
| #define WMI_HOST_HT_CAP_IBF_BFER 0x4000 |
| |
| /* These macros should be used when we wish to advertise STBC support for |
| * only 1SS or 2SS or 3SS. */ |
| #define WMI_HOST_HT_CAP_RX_STBC_1SS 0x0010 /* B4-B5 RX STBC */ |
| #define WMI_HOST_HT_CAP_RX_STBC_2SS 0x0020 /* B4-B5 RX STBC */ |
| #define WMI_HOST_HT_CAP_RX_STBC_3SS 0x0030 /* B4-B5 RX STBC */ |
| |
| |
| #define WMI_HOST_HT_CAP_DEFAULT_ALL (WMI_HOST_HT_CAP_ENABLED | \ |
| WMI_HOST_HT_CAP_HT20_SGI | \ |
| WMI_HOST_HT_CAP_HT40_SGI | \ |
| WMI_HOST_HT_CAP_TX_STBC | \ |
| WMI_HOST_HT_CAP_RX_STBC | \ |
| WMI_HOST_HT_CAP_LDPC) |
| |
| /* WMI_HOST_VHT_CAP_* these maps to ieee 802.11ac vht capability information |
| field. The fields not defined here are not supported, or reserved. |
| Do not change these masks and if you have to add new one follow the |
| bitmask as specified by 802.11ac draft. |
| */ |
| |
| #define WMI_HOST_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003 |
| #define WMI_HOST_VHT_CAP_RX_LDPC 0x00000010 |
| #define WMI_HOST_VHT_CAP_SGI_80MHZ 0x00000020 |
| #define WMI_HOST_VHT_CAP_SGI_160MHZ 0x00000040 |
| #define WMI_HOST_VHT_CAP_TX_STBC 0x00000080 |
| #define WMI_HOST_VHT_CAP_RX_STBC_MASK 0x00000300 |
| #define WMI_HOST_VHT_CAP_RX_STBC_MASK_SHIFT 8 |
| #define WMI_HOST_VHT_CAP_SU_BFER 0x00000800 |
| #define WMI_HOST_VHT_CAP_SU_BFEE 0x00001000 |
| #define WMI_HOST_VHT_CAP_MAX_CS_ANT_MASK 0x0000E000 |
| #define WMI_HOST_VHT_CAP_MAX_CS_ANT_MASK_SHIFT 13 |
| #define WMI_HOST_VHT_CAP_MAX_SND_DIM_MASK 0x00070000 |
| #define WMI_HOST_VHT_CAP_MAX_SND_DIM_MASK_SHIFT 16 |
| #define WMI_HOST_VHT_CAP_MU_BFER 0x00080000 |
| #define WMI_HOST_VHT_CAP_MU_BFEE 0x00100000 |
| #define WMI_HOST_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000 |
| #define WMI_HOST_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIT 23 |
| #define WMI_HOST_VHT_CAP_RX_FIXED_ANT 0x10000000 |
| #define WMI_HOST_VHT_CAP_TX_FIXED_ANT 0x20000000 |
| |
| #define WMI_HOST_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002 |
| |
| /* These macros should be used when we wish to advertise STBC support for |
| * only 1SS or 2SS or 3SS. */ |
| #define WMI_HOST_VHT_CAP_RX_STBC_1SS 0x00000100 |
| #define WMI_HOST_VHT_CAP_RX_STBC_2SS 0x00000200 |
| #define WMI_HOST_VHT_CAP_RX_STBC_3SS 0x00000300 |
| |
| #define WMI_HOST_VHT_CAP_DEFAULT_ALL (WMI_HOST_VHT_CAP_MAX_MPDU_LEN_11454 | \ |
| WMI_HOST_VHT_CAP_SGI_80MHZ | \ |
| WMI_HOST_VHT_CAP_TX_STBC | \ |
| WMI_HOST_VHT_CAP_RX_STBC_MASK | \ |
| WMI_HOST_VHT_CAP_RX_LDPC | \ |
| WMI_HOST_VHT_CAP_MAX_AMPDU_LEN_EXP | \ |
| WMI_HOST_VHT_CAP_RX_FIXED_ANT | \ |
| WMI_HOST_VHT_CAP_TX_FIXED_ANT) |
| |
| /* Interested readers refer to Rx/Tx MCS Map definition as defined in |
| 802.11ac |
| */ |
| #define WMI_HOST_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1)) |
| #define WMI_HOST_VHT_MAX_SUPP_RATE_MASK 0x1fff0000 |
| #define WMI_HOST_VHT_MAX_SUPP_RATE_MASK_SHIFT 16 |
| |
| /** U-APSD configuration of peer station from (re)assoc request and TSPECs */ |
| enum wmi_host_ap_ps_param_uapsd { |
| WMI_HOST_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), |
| WMI_HOST_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), |
| WMI_HOST_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), |
| WMI_HOST_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), |
| WMI_HOST_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), |
| WMI_HOST_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), |
| WMI_HOST_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), |
| WMI_HOST_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), |
| }; |
| /** U-APSD maximum service period of peer station */ |
| enum wmi_host_ap_ps_peer_param_max_sp { |
| WMI_HOST_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0, |
| WMI_HOST_AP_PS_PEER_PARAM_MAX_SP_2 = 1, |
| WMI_HOST_AP_PS_PEER_PARAM_MAX_SP_4 = 2, |
| WMI_HOST_AP_PS_PEER_PARAM_MAX_SP_6 = 3, |
| |
| /* keep last! */ |
| MAX_HOST_WMI_AP_PS_PEER_PARAM_MAX_SP, |
| }; |
| |
| #define WMI_HOST_UAPSD_AC_TYPE_DELI 0 |
| #define WMI_HOST_UAPSD_AC_TYPE_TRIG 1 |
| |
| #define WMI_HOST_UAPSD_AC_BIT_MASK(ac, type) \ |
| ((type == WMI_HOST_UAPSD_AC_TYPE_DELI) ? (1<<(ac<<1)) :\ |
| (1<<((ac<<1)+1))) |
| |
| enum wmi_host_ap_ps_peer_param_wnm_sleep { |
| WMI_HOST_AP_PS_PEER_PARAM_WNM_SLEEP_ENABLE, |
| WMI_HOST_AP_PS_PEER_PARAM_WNM_SLEEP_DISABLE, |
| }; |
| |
| enum wmi_host_ap_ps_peer_param { |
| /** Set uapsd configuration for a given peer. |
| * |
| * This will include the delivery and trigger enabled state for every AC. |
| * The host MLME needs to set this based on AP capability and stations |
| * request Set in the association request received from the station. |
| * |
| * Lower 8 bits of the value specify the UAPSD configuration. |
| * |
| * (see enum wmi_ap_ps_param_uapsd) |
| * The default value is 0. |
| */ |
| WMI_HOST_AP_PS_PEER_PARAM_UAPSD = 0, |
| |
| /** |
| * Set the service period for a UAPSD capable station |
| * |
| * The service period from wme ie in the (re)assoc request frame. |
| * |
| * (see enum wmi_ap_ps_peer_param_max_sp) |
| */ |
| WMI_HOST_AP_PS_PEER_PARAM_MAX_SP = 1, |
| |
| /** Time in seconds for aging out buffered frames |
| * for STA in power save */ |
| WMI_HOST_AP_PS_PEER_PARAM_AGEOUT_TIME = 2, |
| |
| /** Specify frame types that are considered SIFS |
| * RESP trigger frame */ |
| WMI_HOST_AP_PS_PEER_PARAM_SIFS_RESP_FRMTYPE = 3, |
| |
| /** Specifies the trigger state of TID. |
| * Valid only for UAPSD frame type */ |
| WMI_HOST_AP_PS_PEER_PARAM_SIFS_RESP_UAPSD = 4, |
| |
| /** Specifies the WNM sleep state of a STA */ |
| WMI_HOST_AP_PS_PEER_PARAM_WNM_SLEEP = 5, |
| }; |
| #define WMI_HOST_RXERR_CRC 0x01 /* CRC error on frame */ |
| #define WMI_HOST_RXERR_DECRYPT 0x08 /* non-Michael decrypt error */ |
| #define WMI_HOST_RXERR_MIC 0x10 /* Michael MIC decrypt error */ |
| #define WMI_HOST_RXERR_KEY_CACHE_MISS 0x20 /* No/incorrect key matter in h/w */ |
| |
| enum wmi_host_sta_ps_param_uapsd { |
| WMI_HOST_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), |
| WMI_HOST_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), |
| WMI_HOST_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), |
| WMI_HOST_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), |
| WMI_HOST_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), |
| WMI_HOST_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), |
| WMI_HOST_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), |
| WMI_HOST_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), |
| }; |
| |
| enum wmi_host_sta_ps_param_rx_wake_policy { |
| /* Wake up when ever there is an RX activity on the VDEV. In this mode |
| * the Power save SM(state machine) will come out of sleep by either |
| * sending null frame (or) a data frame (with PS==0) in response to TIM |
| * bit set in the received beacon frame from AP. |
| */ |
| WMI_HOST_STA_PS_RX_WAKE_POLICY_WAKE = 0, |
| |
| /* Here the power save state machine will not wakeup in response to TIM |
| * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD |
| * configuration setup by WMISET_PS_SET_UAPSD WMI command. When all |
| * access categories are delivery-enabled, the station will send a UAPSD |
| * trigger frame, otherwise it will send a PS-Poll. |
| */ |
| WMI_HOST_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1, |
| }; |
| enum wmi_host_sta_ps_param_pspoll_count { |
| WMI_HOST_STA_PS_PSPOLL_COUNT_NO_MAX = 0, |
| /* Values greater than 0 indicate the maximum numer of PS-Poll frames FW |
| * will send before waking up. |
| */ |
| }; |
| /** Number of tx frames/beacon that cause the power save SM to wake up. |
| * |
| * Value 1 causes the SM to wake up for every TX. Value 0 has a special |
| * meaning, It will cause the SM to never wake up. This is useful if you want |
| * to keep the system to sleep all the time for some kind of test mode . host |
| * can change this parameter any time. It will affect at the next tx frame. |
| */ |
| enum wmi_host_sta_ps_param_tx_wake_threshold { |
| WMI_HOST_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0, |
| WMI_HOST_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1, |
| |
| /* Values greater than one indicate that many TX attempts per beacon |
| * interval before the STA will wake up |
| */ |
| }; |
| /* |
| * Transmit power scale factor. |
| * |
| */ |
| typedef enum { |
| WMI_HOST_TP_SCALE_MAX = 0, /* no scaling (default) */ |
| WMI_HOST_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */ |
| WMI_HOST_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */ |
| WMI_HOST_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */ |
| WMI_HOST_TP_SCALE_MIN = 4, /* min, but still on */ |
| WMI_HOST_TP_SCALE_SIZE = 5, /* max num of enum */ |
| } WMI_HOST_TP_SCALE; |
| enum { |
| WMI_HOST_RATEPWR_TABLE_OPS_SET, |
| WMI_HOST_RATEPWR_TABLE_OPS_GET, |
| }; |
| /* reserved up through 0xF */ |
| /** |
| * struct wmi_host_dcs_mib_stats - WLAN IM stats from target to host |
| * Below statistics are sent from target to host periodically. |
| * These are collected at target as long as target is running |
| * and target chip is not in sleep. |
| * @listen_time: |
| * @reg_tx_frame_cnt: |
| * @reg_rx_frame_cnt: |
| * @reg_rxclr_cnt: |
| * @reg_cycle_cnt: delta cycle count |
| * @reg_rxclr_ext_cnt: |
| * @reg_ofdm_phyerr_cnt: |
| * @reg_cck_phyerr_cnt: CCK err count since last reset, read from register |
| */ |
| typedef struct _hp_dcs_mib_stats { |
| int32_t listen_time; |
| uint32_t reg_tx_frame_cnt; |
| uint32_t reg_rx_frame_cnt; |
| uint32_t reg_rxclr_cnt; |
| uint32_t reg_cycle_cnt; |
| uint32_t reg_rxclr_ext_cnt; |
| uint32_t reg_ofdm_phyerr_cnt; |
| uint32_t reg_cck_phyerr_cnt; |
| } wmi_host_dcs_mib_stats_t; |
| |
| /** |
| * struct wmi_host_dcs_im_tgt_stats - DCS IM target stats |
| * @reg_tsf32: current running TSF from the TSF-1 |
| * @last_ack_rssi: Known last frame rssi, in case of multiple stations, if |
| * and at different ranges, this would not gaurantee that |
| * this is the least rssi. |
| * @tx_waste_time: Sum of all the failed durations in the last |
| * one second interval. |
| * @rx_time: count how many times the hal_rxerr_phy is marked, in this |
| * time period |
| * @phyerr_cnt: |
| * @mib_stats: wmi_host_dcs_mib_stats_t - collected mib stats as explained |
| * in mib structure |
| * @chan_nf: Channel noise floor (Units are in dBm) |
| * @my_bss_rx_cycle_count: BSS rx cycle count |
| */ |
| typedef struct _wmi_host_dcs_im_tgt_stats { |
| uint32_t reg_tsf32; |
| uint32_t last_ack_rssi; |
| uint32_t tx_waste_time; |
| uint32_t rx_time; |
| uint32_t phyerr_cnt; |
| wmi_host_dcs_mib_stats_t mib_stats; |
| uint32_t chan_nf; |
| uint32_t my_bss_rx_cycle_count; |
| } wmi_host_dcs_im_tgt_stats_t; |
| |
| /** |
| * Enum for pktlog req |
| */ |
| typedef enum { |
| WMI_HOST_PKTLOG_EVENT_RX = 0x1, |
| WMI_HOST_PKTLOG_EVENT_TX = 0x2, |
| WMI_HOST_PKTLOG_EVENT_RCF = 0x4, /* Rate Control Find */ |
| WMI_HOST_PKTLOG_EVENT_RCU = 0x8, /* Rate Control Update */ |
| WMI_HOST_PKTLOG_EVENT_DBG_PRINT = 0x10, /* DEBUG prints */ |
| /* To support Smart Antenna */ |
| WMI_HOST_PKTLOG_EVENT_SMART_ANTENNA = 0x20, |
| WMI_HOST_PKTLOG_EVENT_H_INFO = 0x40, |
| WMI_HOST_PKTLOG_EVENT_STEERING = 0x80, |
| /* To support Tx data Capture */ |
| WMI_HOST_PKTLOG_EVENT_TX_DATA_CAPTURE = 0x100, |
| } WMI_HOST_PKTLOG_EVENT; |
| |
| /** |
| * wmi_host_phyerr |
| * |
| */ |
| #define WMI_HOST_PHY_ERROR_SPECTRAL_SCAN 0x26 |
| #define WMI_HOST_PHY_ERROR_FALSE_RADAR_EXT 0x24 |
| |
| #define WMI_HOST_AR900B_DFS_PHYERR_MASK 0x4 |
| #define WMI_HOST_AR900B_SPECTRAL_PHYERR_MASK 0x4000000 |
| |
| /** |
| * struct wmi_host_perchain_rssi_info - per chain RSSI info |
| * @rssi_pri20: RSSI on primary 20 |
| * @rssi_sec20: RSSI on secomdary 20 |
| * @rssi_sec40: RSSI secondary 40 |
| * @rssi_sec80: RSSI secondary 80 |
| */ |
| typedef struct wmi_host_perchain_rssi_info { |
| int8_t rssi_pri20; |
| int8_t rssi_sec20; |
| int8_t rssi_sec40; |
| int8_t rssi_sec80; |
| } wmi_host_perchain_rssi_info_t; |
| |
| /** |
| * struct _wmi_host_rf_info - RF measurement information |
| * @rssi_comb: RSSI Information |
| * @pc_rssi_info[4]: For now, we know we are getting information |
| * for only 4 chains at max. For future extensions |
| * use a define |
| * @noise_floor: Noise floor information |
| */ |
| typedef struct _wmi_host_rf_info { |
| int8_t rssi_comb; |
| wmi_host_perchain_rssi_info_t pc_rssi_info[4]; |
| int16_t noise_floor[4]; |
| } wmi_host_rf_info_t; |
| |
| /** |
| * struct _wmi_host_chan_info |
| * @center_freq1: center frequency 1 in MHz |
| * @center_freq2: center frequency 2 in MHz -valid only for |
| * 11ACVHT 80PLUS80 mode |
| * @chan_width: channel width in MHz |
| */ |
| typedef struct _wmi_host_chan_info { |
| u_int16_t center_freq1; |
| u_int16_t center_freq2; |
| u_int8_t chan_width; |
| } wmi_host_chan_info_t; |
| |
| /** |
| * struct wmi_host_phyerr |
| * @rf_info: |
| * @chan_info: |
| * @tsf64: |
| * @phy_err_code: |
| * @tsf_timestamp: |
| * @bufp: |
| * @buf_len: |
| * @phy_err_mask0: |
| * @phy_err_mask1: |
| * @pdev_id: pdev_id |
| */ |
| typedef struct _wmi_host_phyerr { |
| wmi_host_rf_info_t rf_info; |
| wmi_host_chan_info_t chan_info; |
| uint64_t tsf64; |
| int32_t phy_err_code; |
| uint32_t tsf_timestamp; |
| uint8_t *bufp; |
| uint32_t buf_len; |
| uint32_t phy_err_mask0; |
| uint32_t phy_err_mask1; |
| uint32_t pdev_id; |
| } wmi_host_phyerr_t; |
| |
| /** |
| * struct wmi_host_rtt_event_hdr |
| * @req_id: request id |
| * @status: status |
| * @meas_done: measurement done flag |
| * @meas_type: measurement type |
| * @report_type: report type |
| * @v3_status: v2 status |
| * @v3_finish: |
| * @v3_tm_start: |
| * @num_ap: number of AP |
| * @result: resuult |
| * @dest_mac: destination mac |
| */ |
| typedef struct { |
| uint16_t req_id; |
| uint16_t status:1, |
| meas_done:1, |
| meas_type:3, |
| report_type:3, |
| v3_status:2, |
| v3_finish:1, |
| v3_tm_start:1, |
| num_ap:4; |
| uint16_t result; |
| uint8_t dest_mac[IEEE80211_ADDR_LEN]; |
| } wmi_host_rtt_event_hdr; |
| |
| /** |
| * struct wmi_host_rtt_meas_event - RTT measurement event |
| * @chain_mask: |
| * @bw: |
| * @rsvd: |
| * @txrxchain_mask: Bit:0-3:chain mask |
| * Bit 4-5: band width info |
| * 00 --Legacy 20, 01 --HT/VHT20 |
| * 10 --HT/VHT40, 11 -- VHT80 |
| * @tod: resolution of 0.1ns |
| * @toa: resolution of 0.1ns |
| * @t3: |
| * @t4: |
| * @rssi0: |
| * @rssi1: |
| * @rssi2: |
| * @rssi3: |
| */ |
| typedef struct { |
| uint32_t chain_mask:3, |
| bw:2, |
| rsvd:27; |
| uint32_t txrxchain_mask; |
| uint64_t tod; |
| uint64_t toa; |
| uint64_t t3; |
| uint64_t t4; |
| uint32_t rssi0; |
| uint32_t rssi1; |
| uint32_t rssi2; |
| uint32_t rssi3; |
| } wmi_host_rtt_meas_event; |
| |
| /*----RTT Report event definition ----*/ |
| typedef enum { |
| /* rtt cmd header parsing error --terminate */ |
| WMI_HOST_RTT_COMMAND_HEADER_ERROR = 0, |
| /* rtt body parsing error -- skip current STA REQ */ |
| WMI_HOST_RTT_COMMAND_ERROR, |
| /* rtt no resource -- terminate */ |
| WMI_HOST_RTT_MODULE_BUSY, |
| /* STA exceed the support limit -- only server the first n STA */ |
| WMI_HOST_RTT_TOO_MANY_STA, |
| /* any allocate failure */ |
| WMI_HOST_RTT_NO_RESOURCE, |
| /* can not find vdev with vdev ID - skip current STA REQ */ |
| WMI_HOST_RTT_VDEV_ERROR, |
| /* Tx failure -- continiue and measure number */ |
| WMI_HOST_RTT_TRANSIMISSION_ERROR, |
| /* wait for first TM timer expire-terminate current STA measurement */ |
| WMI_HOST_RTT_TM_TIMER_EXPIRE, |
| /* we do not support RTT measurement with this type of frame */ |
| WMI_HOST_RTT_FRAME_TYPE_NOSUPPORT, |
| /* whole RTT measurement timer expire-terminate |
| ** current STA measurement */ |
| WMI_HOST_RTT_TIMER_EXPIRE, |
| /* channel swicth failed */ |
| WMI_HOST_RTT_CHAN_SWITCH_ERROR, |
| /* TMR trans error, this dest peer will be skipped */ |
| WMI_HOST_RTT_TMR_TRANS_ERROR, |
| /* V3 only. If both CFR and Token mismatch, do not report */ |
| WMI_HOST_RTT_NO_REPORT_BAD_CFR_TOKEN, |
| /* For First TM, if CFR is bad, then do not report */ |
| WMI_HOST_RTT_NO_REPORT_FIRST_TM_BAD_CFR, |
| /* do not allow report type2 mix with type 0, 1 */ |
| WMI_HOST_RTT_REPORT_TYPE2_MIX, |
| /* LCI Configuration OK. - Responder only */ |
| WMI_HOST_RTT_LCI_CFG_OK, |
| /* LCR configuration OK. - Responder only */ |
| WMI_HOST_RTT_LCR_CFG_OK, |
| /* Bad configuration LCI (or) LCR request - Responder only */ |
| WMI_HOST_RTT_CFG_ERROR, |
| WMI_HOST_WMI_RTT_REJECT_MAX, |
| } WMI_HOST_RTT_ERROR_INDICATOR; |
| typedef struct { |
| wmi_host_rtt_event_hdr hdr; |
| WMI_HOST_RTT_ERROR_INDICATOR reject_reason; |
| } wmi_host_rtt_error_report_event; |
| |
| #if defined(AR9888) |
| typedef enum { |
| WMI_HOST_PROF_CPU_IDLE, |
| WMI_HOST_PROF_PPDU_PROC, |
| WMI_HOST_PROF_PPDU_POST, |
| WMI_HOST_PROF_HTT_TX_INPUT, |
| WMI_HOST_PROF_MSDU_ENQ, |
| WMI_HOST_PROF_PPDU_POST_HAL, |
| WMI_HOST_PROF_COMPUTE_TX_TIME, |
| |
| /* Add new ID's above this. */ |
| WMI_HOST_PROF_MAX_ID, |
| } wmi_host_profile_id_t; |
| #endif |
| |
| #define WMI_HOST_WLAN_PROFILE_MAX_HIST 3 |
| #define WMI_HOST_WLAN_PROFILE_MAX_BIN_CNT 32 |
| |
| #if defined(AR9888) |
| #define WMI_HOST_MAX_PROFILE WMI_HOST_PROF_MAX_ID |
| #else |
| #define WMI_HOST_MAX_PROFILE WMI_HOST_WLAN_PROFILE_MAX_BIN_CNT |
| #endif |
| |
| /** |
| * struct wmi_host_wlan_profile - Host profile param |
| * @id: profile id |
| * @cnt: Count |
| * @tot: |
| * @min: minimum |
| * @max: Mac |
| * @hist_intvl: history interval |
| * @hist: profile data history |
| */ |
| typedef struct { |
| uint32_t id; |
| uint32_t cnt; |
| uint32_t tot; |
| uint32_t min; |
| uint32_t max; |
| uint32_t hist_intvl; |
| uint32_t hist[WMI_HOST_WLAN_PROFILE_MAX_HIST]; |
| } wmi_host_wlan_profile_t; |
| |
| /** |
| * struct wmi_host_wlan_profile_ctx_t - profile context |
| * @tot: time in us |
| * @tx_msdu_cnt: MSDU TX count |
| * @tx_mpdu_cnt: MPDU tx count |
| * @tx_ppdu_cnt: PPDU tx count |
| * @rx_msdu_cnt: MSDU RX count |
| * @rx_mpdu_cnt: MPDU RXcount |
| * @bin_count: Bin count |
| */ |
| typedef struct { |
| uint32_t tot; |
| uint32_t tx_msdu_cnt; |
| uint32_t tx_mpdu_cnt; |
| uint32_t tx_ppdu_cnt; |
| uint32_t rx_msdu_cnt; |
| uint32_t rx_mpdu_cnt; |
| uint32_t bin_count; |
| } wmi_host_wlan_profile_ctx_t; |
| |
| /** |
| * struct wmi_host_chan_info_event - Channel info WMI event |
| * @pdev_id: pdev_id |
| * @err_code: Error code |
| * @freq: Channel freq |
| * @cmd_flags: Read flags |
| * @noise_floor: Noise Floor value |
| * @rx_clear_count: rx clear count |
| * @cycle_count: cycle count |
| * @chan_tx_pwr_range: channel tx power per range |
| * @chan_tx_pwr_tp: channel tx power per throughput |
| * @rx_frame_count: rx frame count |
| * @rx_11b_mode_data_duration: 11b mode data duration |
| * @my_bss_rx_cycle_count: BSS rx cycle count |
| * @tx_frame_cnt: tx frame count |
| * @mac_clk_mhz: mac clock |
| * @vdev_id: unique id identifying the VDEV |
| */ |
| typedef struct { |
| uint32_t pdev_id; |
| uint32_t err_code; |
| uint32_t freq; |
| uint32_t cmd_flags; |
| uint32_t noise_floor; |
| uint32_t rx_clear_count; |
| uint32_t cycle_count; |
| uint32_t chan_tx_pwr_range; |
| uint32_t chan_tx_pwr_tp; |
| uint32_t rx_frame_count; |
| uint32_t rx_11b_mode_data_duration; |
| uint32_t my_bss_rx_cycle_count; |
| uint32_t tx_frame_cnt; |
| uint32_t mac_clk_mhz; |
| uint32_t vdev_id; |
| } wmi_host_chan_info_event; |
| |
| /** |
| * struct wmi_host_pdev_channel_hopping_event |
| * @pdev_id: pdev_id |
| * @noise_floor_report_iter: Noise threshold iterations with high values |
| * @noise_floor_total_iter: Total noise threshold iterations |
| */ |
| typedef struct { |
| uint32_t pdev_id; |
| uint32_t noise_floor_report_iter; |
| uint32_t noise_floor_total_iter; |
| } wmi_host_pdev_channel_hopping_event; |
| |
| /** |
| * struct wmi_host_pdev_bss_chan_info_event |
| * @pdev_id: pdev_id |
| * @freq: Units in MHz |
| * @noise_floor: units are dBm |
| * @rx_clear_count_low: |
| * @rx_clear_count_high: |
| * @cycle_count_low: |
| * @cycle_count_high: |
| * @tx_cycle_count_low: |
| * @tx_cycle_count_high: |
| * @rx_cycle_count_low: |
| * @rx_cycle_count_high: |
| * @rx_bss_cycle_count_low: |
| * @rx_bss_cycle_count_high: |
| * @reserved: |
| */ |
| typedef struct { |
| uint32_t pdev_id; |
| uint32_t freq; |
| uint32_t noise_floor; |
| uint32_t rx_clear_count_low; |
| uint32_t rx_clear_count_high; |
| uint32_t cycle_count_low; |
| uint32_t cycle_count_high; |
| uint32_t tx_cycle_count_low; |
| uint32_t tx_cycle_count_high; |
| uint32_t rx_cycle_count_low; |
| uint32_t rx_cycle_count_high; |
| uint32_t rx_bss_cycle_count_low; |
| uint32_t rx_bss_cycle_count_high; |
| uint32_t reserved; |
| } wmi_host_pdev_bss_chan_info_event; |
| |
| #define WMI_HOST_INST_STATS_INVALID_RSSI 0 |
| /** |
| * struct wmi_host_inst_stats_resp |
| * @iRSSI: Instantaneous RSSI |
| * @peer_macaddr: peer mac address |
| * @pdev_id: pdev_id |
| */ |
| typedef struct { |
| uint32_t iRSSI; |
| wmi_host_mac_addr peer_macaddr; |
| uint32_t pdev_id; |
| } wmi_host_inst_stats_resp; |
| |
| /* Event definition and new structure addition to send event |
| * to host to block/unblock tx data traffic based on peer_ast_idx or vdev id |
| */ |
| #define WMI_HOST_INVALID_PEER_AST_INDEX 0xffff |
| #define WMI_HOST_TX_DATA_TRAFFIC_CTRL_BLOCK 0x1 |
| #define WMI_HOST_TX_DATA_TRAFFIC_CTRL_UNBLOCK 0x2 |
| /** |
| * struct wmi_host_tx_data_traffic_ctrl_event |
| * @peer_ast_idx: For vdev based control, peer_ast_idx will be |
| * WMI_INVALID_PEER_AST_INDEX |
| * @vdev_id: only applies if peer_ast_idx == INVALID |
| * @ctrl_cmd: WMI_TX_DATA_TRAFFIC_CTRL_BLOCK or |
| * WMI_TX_DATA_TRAFFIC_CTRL_UNBLOCK |
| */ |
| typedef struct { |
| uint32_t peer_ast_idx; |
| uint32_t vdev_id; |
| uint32_t ctrl_cmd; |
| } wmi_host_tx_data_traffic_ctrl_event; |
| |
| enum { |
| WMI_HOST_ATF_PEER_STATS_DISABLED = 0, |
| WMI_HOST_ATF_PEER_STATS_ENABLED = 1, |
| }; |
| |
| #define WMI_HOST_ATF_PEER_STATS_GET_PEER_AST_IDX(token_info) \ |
| (token_info.field1 & 0xffff) |
| |
| #define WMI_HOST_ATF_PEER_STATS_GET_USED_TOKENS(token_info) \ |
| ((token_info.field2 & 0xffff0000) >> 16) |
| |
| #define WMI_HOST_ATF_PEER_STATS_GET_UNUSED_TOKENS(token_info) \ |
| (token_info.field2 & 0xffff) |
| |
| #define WMI_HOST_ATF_PEER_STATS_SET_PEER_AST_IDX(token_info, peer_ast_idx) \ |
| do { \ |
| token_info.field1 &= 0xffff0000; \ |
| token_info.field1 |= ((peer_ast_idx) & 0xffff); \ |
| } while (0) |
| |
| #define WMI_HOST_ATF_PEER_STATS_SET_USED_TOKENS(token_info, used_token) \ |
| do { \ |
| token_info.field2 &= 0x0000ffff; \ |
| token_info.field2 |= (((used_token) & 0xffff) << 16); \ |
| } while (0) |
| |
| #define WMI_HOST_ATF_PEER_STATS_SET_UNUSED_TOKENS(token_info, unused_token) \ |
| do { \ |
| token_info.field2 &= 0xffff0000; \ |
| token_info.field2 |= ((unused_token) & 0xffff); \ |
| } while (0) |
| |
| /** |
| * struct wmi_host_atf_peer_stats_info |
| * @field1: bits 15:0 peer_ast_index WMI_ATF_PEER_STATS_GET_PEER_AST_IDX |
| * bits 31:16 reserved |
| * @field2: bits 15:0 used tokens WMI_ATF_PEER_STATS_GET_USED_TOKENS |
| * bits 31:16 unused tokens WMI_ATF_PEER_STATS_GET_UNUSED_TOKENS |
| * @field3: for future use |
| */ |
| typedef struct { |
| uint32_t field1; |
| uint32_t field2; |
| uint32_t field3; |
| } wmi_host_atf_peer_stats_info; |
| |
| /** |
| * struct wmi_host_atf_peer_stats_event |
| * @pdev_id: pdev_id |
| * @num_atf_peers: number of peers in token_info_list |
| * @comp_usable_airtime: computed usable airtime in tokens |
| * @reserved[4]: reserved for future use |
| * @wmi_host_atf_peer_stats_info token_info_list: list of num_atf_peers |
| */ |
| typedef struct { |
| uint32_t pdev_id; |
| uint32_t num_atf_peers; |
| uint32_t comp_usable_airtime; |
| uint32_t reserved[4]; |
| wmi_host_atf_peer_stats_info token_info_list[1]; |
| } wmi_host_atf_peer_stats_event; |
| |
| /** |
| * struct wmi_host_ath_dcs_cw_int |
| * @channel: either number or freq in mhz |
| */ |
| typedef struct { |
| uint32_t channel; |
| } wmi_host_ath_dcs_cw_int; |
| |
| #define WMI_MAX_POWER_DBG_ARGS 8 |
| |
| /** |
| * struct wmi_power_dbg_params - power debug command parameter |
| * @pdev_id: subsystem identifier |
| * @module_id: parameter id |
| * @num_arg: no of arguments |
| * @args: arguments |
| */ |
| struct wmi_power_dbg_params { |
| uint32_t pdev_id; |
| uint32_t module_id; |
| uint32_t num_args; |
| uint32_t args[WMI_MAX_POWER_DBG_ARGS]; |
| }; |
| |
| /** |
| * struct wmi_adaptive_dwelltime_params - the adaptive dwelltime params |
| * @vdev_id: vdev id |
| * @is_enabled: Adaptive dwell time is enabled/disabled |
| * @dwelltime_mode: global default adaptive dwell mode |
| * @lpf_weight: weight to calculate the average low pass |
| * filter for channel congestion |
| * @passive_mon_intval: intval to monitor wifi activity in passive scan in msec |
| * @wifi_act_threshold: % of wifi activity used in passive scan 0-100 |
| * |
| */ |
| struct wmi_adaptive_dwelltime_params { |
| uint32_t vdev_id; |
| bool is_enabled; |
| enum wmi_dwelltime_adaptive_mode dwelltime_mode; |
| uint8_t lpf_weight; |
| uint8_t passive_mon_intval; |
| uint8_t wifi_act_threshold; |
| }; |
| |
| /** |
| * struct wmi_per_roam_config - per based roaming parameters |
| * @enable: if PER based roaming is enabled/disabled |
| * @tx_high_rate_thresh: high rate threshold at which PER based |
| * roam will stop in tx path |
| * @rx_high_rate_thresh: high rate threshold at which PER based |
| * roam will stop in rx path |
| * @tx_low_rate_thresh: rate below which traffic will be considered |
| * for PER based roaming in Tx path |
| * @rx_low_rate_thresh: rate below which traffic will be considered |
| * for PER based roaming in Tx path |
| * @tx_rate_thresh_percnt: % above which when traffic is below low_rate_thresh |
| * will be considered for PER based scan in tx path |
| * @rx_rate_thresh_percnt: % above which when traffic is below low_rate_thresh |
| * will be considered for PER based scan in rx path |
| * @per_rest_time: time for which PER based roam will wait once it |
| * issues a roam scan. |
| * @tx_per_mon_time: Minimum time required to be considered as valid scenario |
| * for PER based roam in tx path |
| * @rx_per_mon_time: Minimum time required to be considered as valid scenario |
| * for PER based roam in rx path |
| * @min_candidate_rssi: Minimum RSSI threshold for candidate AP to be used for |
| * PER based roaming |
| */ |
| struct wmi_per_roam_config { |
| uint32_t enable; |
| uint32_t tx_high_rate_thresh; |
| uint32_t rx_high_rate_thresh; |
| uint32_t tx_low_rate_thresh; |
| uint32_t rx_low_rate_thresh; |
| uint32_t tx_rate_thresh_percnt; |
| uint32_t rx_rate_thresh_percnt; |
| uint32_t per_rest_time; |
| uint32_t tx_per_mon_time; |
| uint32_t rx_per_mon_time; |
| uint32_t min_candidate_rssi; |
| }; |
| |
| /** |
| * struct wmi_per_roam_config_req: PER based roaming config request |
| * @vdev_id: vdev id on which config needs to be set |
| * @per_config: PER config |
| */ |
| struct wmi_per_roam_config_req { |
| uint8_t vdev_id; |
| struct wmi_per_roam_config per_config; |
| }; |
| |
| /** |
| * struct wmi_fw_dump_seg_req - individual segment details |
| * @seg_id - segment id. |
| * @seg_start_addr_lo - lower address of the segment. |
| * @seg_start_addr_hi - higher address of the segment. |
| * @seg_length - length of the segment. |
| * @dst_addr_lo - lower address of the destination buffer. |
| * @dst_addr_hi - higher address of the destination buffer. |
| * |
| * This structure carries the information to firmware about the |
| * individual segments. This structure is part of firmware memory |
| * dump request. |
| */ |
| struct wmi_fw_dump_seg_req { |
| uint8_t seg_id; |
| uint32_t seg_start_addr_lo; |
| uint32_t seg_start_addr_hi; |
| uint32_t seg_length; |
| uint32_t dst_addr_lo; |
| uint32_t dst_addr_hi; |
| }; |
| |
| /** |
| * enum wmi_userspace_log_level - Log level at userspace |
| * @WMI_LOG_LEVEL_NO_COLLECTION: verbose_level 0 corresponds to no collection |
| * @WMI_LOG_LEVEL_NORMAL_COLLECT: verbose_level 1 correspond to normal log |
| * level with minimal user impact. This is the default value. |
| * @WMI_LOG_LEVEL_ISSUE_REPRO: verbose_level 2 are enabled when user is lazily |
| * trying to reproduce a problem, wifi performances and power can be impacted |
| * but device should not otherwise be significantly impacted |
| * @WMI_LOG_LEVEL_ACTIVE: verbose_level 3+ are used when trying to |
| * actively debug a problem |
| * |
| * Various log levels defined in the userspace for logging applications |
| */ |
| enum wmi_userspace_log_level { |
| WMI_LOG_LEVEL_NO_COLLECTION, |
| WMI_LOG_LEVEL_NORMAL_COLLECT, |
| WMI_LOG_LEVEL_ISSUE_REPRO, |
| WMI_LOG_LEVEL_ACTIVE, |
| }; |
| |
| /** |
| * HW mode config type replicated from FW header |
| * @WMI_HOST_HW_MODE_SINGLE: Only one PHY is active. |
| * @WMI_HOST_HW_MODE_DBS: Both PHYs are active in different bands, |
| * one in 2G and another in 5G. |
| * @WMI_HOST_HW_MODE_SBS_PASSIVE: Both PHYs are in passive mode (only rx) in |
| * same band; no tx allowed. |
| * @WMI_HOST_HW_MODE_SBS: Both PHYs are active in the same band. |
| * Support for both PHYs within one band is planned |
| * for 5G only(as indicated in WMI_MAC_PHY_CAPABILITIES), |
| * but could be extended to other bands in the future. |
| * The separation of the band between the two PHYs needs |
| * to be communicated separately. |
| * @WMI_HOST_HW_MODE_DBS_SBS: 3 PHYs, with 2 on the same band doing SBS |
| * as in WMI_HW_MODE_SBS, and 3rd on the other band |
| * @WMI_HOST_HW_MODE_DBS_OR_SBS: Two PHY with one PHY capabale of both 2G and |
| * 5G. It can support SBS (5G + 5G) OR DBS (5G + 2G). |
| * @WMI_HOST_HW_MODE_MAX: Max hw_mode_id. Used to indicate invalid mode. |
| */ |
| enum wmi_host_hw_mode_config_type { |
| WMI_HOST_HW_MODE_SINGLE = 0, |
| WMI_HOST_HW_MODE_DBS = 1, |
| WMI_HOST_HW_MODE_SBS_PASSIVE = 2, |
| WMI_HOST_HW_MODE_SBS = 3, |
| WMI_HOST_HW_MODE_DBS_SBS = 4, |
| WMI_HOST_HW_MODE_DBS_OR_SBS = 5, |
| WMI_HOST_HW_MODE_MAX, |
| }; |
| |
| /* |
| * struct wmi_host_peer_txmu_cnt_event |
| * @tx_mu_transmitted - MU-MIMO tx count |
| */ |
| typedef struct { |
| uint32_t tx_mu_transmitted; |
| } wmi_host_peer_txmu_cnt_event; |
| |
| #define MAX_SAR_LIMIT_ROWS_SUPPORTED 64 |
| /** |
| * struct sar_limit_cmd_row - sar limts row |
| * @band_id: Optional param for frequency band |
| * @chain_id: Optional param for antenna chain id |
| * @mod_id: Optional param for modulation scheme |
| * @limit_value: Mandatory param providing power limits in steps of 0.5 dbm |
| * @validity_bitmap: bitmap of valid optional params in sar_limit_cmd_row struct |
| */ |
| struct sar_limit_cmd_row { |
| uint32_t band_id; |
| uint32_t chain_id; |
| uint32_t mod_id; |
| uint32_t limit_value; |
| uint32_t validity_bitmap; |
| }; |
| |
| /** |
| * struct sar_limit_cmd_params - sar limts params |
| * @sar_enable: flag to enable SAR |
| * @num_limit_rows: number of items in sar_limits |
| * @commit_limits: indicates firmware to start apply new SAR values |
| * @sar_limit_row_list: pointer to array of sar limit rows |
| */ |
| struct sar_limit_cmd_params { |
| uint32_t sar_enable; |
| uint32_t num_limit_rows; |
| uint32_t commit_limits; |
| struct sar_limit_cmd_row *sar_limit_row_list; |
| }; |
| |
| /* |
| * struct wmi_peer_gid_userpos_list_event |
| * @usr_list - User list |
| */ |
| #define GID_OVERLOAD_GROUP_COUNT 15 |
| typedef struct { |
| uint32_t usr_list[GID_OVERLOAD_GROUP_COUNT]; |
| } wmi_host_peer_gid_userpos_list_event; |
| |
| /** |
| * enum rcpi_measurement_type - for identifying type of rcpi measurement |
| * @RCPI_MEASUREMENT_TYPE_AVG_MGMT: avg rcpi of mgmt frames |
| * @RCPI_MEASUREMENT_TYPE_AVG_DATA: avg rcpi of data frames |
| * @RCPI_MEASUREMENT_TYPE_LAST_MGMT: rcpi of last mgmt frame |
| * @RCPI_MEASUREMENT_TYPE_LAST_DATA: rcpi of last data frame |
| * @RCPI_MEASUREMENT_TYPE_INVALID: invalid rcpi measurement type |
| */ |
| enum rcpi_measurement_type { |
| RCPI_MEASUREMENT_TYPE_AVG_MGMT = 0x1, |
| RCPI_MEASUREMENT_TYPE_AVG_DATA = 0x2, |
| RCPI_MEASUREMENT_TYPE_LAST_MGMT = 0x3, |
| RCPI_MEASUREMENT_TYPE_LAST_DATA = 0x4, |
| RCPI_MEASUREMENT_TYPE_INVALID = 0x5, |
| }; |
| |
| /** |
| * struct rcpi_req - RCPI req parameter |
| * @vdev_id: virtual device id |
| * @measurement_type: type of rcpi from enum wmi_rcpi_measurement_type |
| * @mac_addr: peer mac addr for which measurement is required |
| */ |
| struct rcpi_req { |
| uint32_t vdev_id; |
| enum rcpi_measurement_type measurement_type; |
| uint8_t mac_addr[IEEE80211_ADDR_LEN]; |
| }; |
| |
| /** |
| * struct rcpi_res - RCPI response parameter |
| * @vdev_id: virtual device id |
| * @measurement_type: type of rcpi from enum wmi_rcpi_measurement_type |
| * @mac_addr: peer mac addr for which measurement is required |
| * @rcpi_value: value of RCPI computed by firmware |
| */ |
| struct rcpi_res { |
| uint32_t vdev_id; |
| enum rcpi_measurement_type measurement_type; |
| uint8_t mac_addr[IEEE80211_ADDR_LEN]; |
| int32_t rcpi_value; |
| }; |
| |
| #define WMI_HOST_BOARD_MCN_STRING_MAX_SIZE 19 |
| #define WMI_HOST_BOARD_MCN_STRING_BUF_SIZE \ |
| (WMI_HOST_BOARD_MCN_STRING_MAX_SIZE+1) /* null-terminator */ |
| |
| typedef struct { |
| uint32_t software_cal_version; |
| uint32_t board_cal_version; |
| /* board_mcn_detail: |
| * Provide a calibration message string for the host to display. |
| * Note: on a big-endian host, the 4 bytes within each A_UINT32 portion |
| * of a WMI message will be automatically byteswapped by the copy engine |
| * as the messages are transferred between host and target, to convert |
| * between the target's little-endianness and the host's big-endianness. |
| * Consequently, a big-endian host should manually unswap the bytes |
| * within the board_mcn_detail string buffer to get the bytes back into |
| * the desired natural order. |
| */ |
| uint8_t board_mcn_detail[WMI_HOST_BOARD_MCN_STRING_BUF_SIZE]; |
| uint32_t cal_ok; /* filled with CALIBRATION_STATUS enum value */ |
| } wmi_host_pdev_check_cal_version_event; |
| |
| /** |
| * enum WMI_HOST_CALIBRATION_STATUS - Host defined Enums for cal status |
| * @WMI_HOST_NO_FEATURE: The board was calibrated with a meta |
| * which did not have this feature |
| * @WMI_HOST_CALIBRATION_OK: The calibration status is OK |
| * @WMI_HOST_CALIBRATION_NOT_OK: The calibration status is NOT OK |
| */ |
| enum WMI_HOST_CALIBRATION_STATUS { |
| WMI_HOST_NO_FEATURE = 0, |
| WMI_HOST_CALIBRATION_OK, |
| WMI_HOST_CALIBRATION_NOT_OK, |
| }; |
| |
| /** |
| * struct wmi_host_pdev_utf_event - Host defined struct to hold utf event data |
| * @data: Pointer to data |
| * @datalen: Data length |
| * @pdev_id: Pdev_id of data |
| * |
| */ |
| struct wmi_host_pdev_utf_event { |
| uint8_t *data; |
| uint16_t datalen; |
| uint32_t pdev_id; |
| }; |
| |
| /** |
| * struct wmi_host_utf_seg_header_info - Host defined struct to map seg info in |
| * UTF event |
| * @len: segment length |
| * @msgref: message reference |
| * @segment_info: segment info |
| * @pdev_id: pdev_id |
| * |
| */ |
| struct wmi_host_utf_seg_header_info { |
| uint32_t len; |
| uint32_t msgref; |
| uint32_t segment_info; |
| uint32_t pdev_id; |
| }; |
| |
| /** |
| * struct wmi_host_pdev_qvit_event - Host defined struct to hold qvit event data |
| * @data: Pointer to data |
| * @datalen: Data length |
| * |
| */ |
| struct wmi_host_pdev_qvit_event { |
| uint8_t *data; |
| uint16_t datalen; |
| uint32_t pdev_id; |
| }; |
| |
| /** |
| * struct wmi_host_peer_delete_response_event - Peer Delete response event param |
| * @vdev_id: vdev id |
| * @mac_address: Peer Mac Address |
| * |
| */ |
| struct wmi_host_peer_delete_response_event { |
| uint32_t vdev_id; |
| struct qdf_mac_addr mac_address; |
| }; |
| |
| /** |
| * @struct wmi_host_dcs_interference_param |
| * @interference_type: Type of DCS Interference |
| * @uint32_t pdev_id: pdev id |
| */ |
| struct wmi_host_dcs_interference_param { |
| uint32_t interference_type; |
| uint32_t pdev_id; |
| }; |
| |
| /* |
| * struct wmi_host_fips_event_param: FIPS event param |
| * @pdev_id: pdev id |
| * @error_status: Error status: 0 (no err), 1, or OPER_TIMEOUR |
| * @data_len: FIPS data lenght |
| * @data: pointer to data |
| */ |
| struct wmi_host_fips_event_param { |
| uint32_t pdev_id; |
| uint32_t error_status; |
| uint32_t data_len; |
| uint32_t *data; |
| }; |
| |
| /** |
| * struct wmi_host_proxy_ast_reserve_param |
| * @pdev_id: pdev id |
| * @result: result |
| */ |
| struct wmi_host_proxy_ast_reserve_param { |
| uint32_t pdev_id; |
| uint32_t result; |
| }; |
| |
| /** |
| * struct wmi_host_pdev_band_to_mac - freq range for mac |
| * @pdev_id: PDEV ID to identifiy mac |
| * @start_freq: start frequency value |
| * @end_freq: end frequency value |
| */ |
| struct wmi_host_pdev_band_to_mac { |
| uint32_t pdev_id; |
| uint32_t start_freq; |
| uint32_t end_freq; |
| }; |
| #define WMI_HOST_MAX_PDEV 3 |
| |
| /** |
| * struct wmi_init_cmd_param - INIT command params |
| * @target_resource_config: pointer to resource config |
| * @num_mem_chunks: number of memory chunks |
| * @struct wmi_host_mem_chunk: pointer to memory chunks |
| * @hw_mode_index: HW mode index chosen |
| * @num_band_to_mac: Number of band to mac setting |
| * @struct wmi_host_pdev_band_to_mac: band to mac setting |
| */ |
| struct wmi_init_cmd_param { |
| target_resource_config *res_cfg; |
| uint8_t num_mem_chunks; |
| struct wmi_host_mem_chunk *mem_chunks; |
| uint32_t hw_mode_id; |
| uint32_t num_band_to_mac; |
| struct wmi_host_pdev_band_to_mac band_to_mac[WMI_HOST_MAX_PDEV]; |
| }; |
| |
| /** |
| * struct pdev_csa_switch_count_status - CSA switch count status event param |
| * @pdev_id: Physical device identifier |
| * @current_switch_count: Current CSA switch count |
| * @num_vdevs: Number of vdevs that need restart |
| * @vdev_ids: Array containing the vdev ids that need restart |
| */ |
| struct pdev_csa_switch_count_status { |
| uint32_t pdev_id; |
| uint32_t current_switch_count; |
| uint32_t num_vdevs; |
| uint32_t *vdev_ids; |
| }; |
| |
| /** |
| * enum wmi_host_active-bpf_mode - FW_ACTIVE_BPF_MODE, replicated from FW header |
| * @WMI_HOST_ACTIVE_BPF_DISABLED: BPF is disabled for all packets in active mode |
| * @WMI_HOST_ACTIVE_BPF_ENABLED: BPF is enabled for all packets in active mode |
| * @WMI_HOST_ACTIVE_BPF_ADAPTIVE: BPF is enabled for packets up to some |
| * threshold in active mode |
| */ |
| enum wmi_host_active_bpf_mode { |
| WMI_HOST_ACTIVE_BPF_DISABLED = (1 << 1), |
| WMI_HOST_ACTIVE_BPF_ENABLED = (1 << 2), |
| WMI_HOST_ACTIVE_BPF_ADAPTIVE = (1 << 3) |
| }; |
| |
| /** |
| * struct coex_config_params - Coex config command params |
| * @vdev_id: Virtual AP device identifier |
| * @config_type: Configuration type - wmi_coex_config_type enum |
| * @config_arg1: Configuration argument based on config type |
| * @config_arg2: Configuration argument based on config type |
| * @config_arg3: Configuration argument based on config type |
| * @config_arg4: Configuration argument based on config type |
| * @config_arg5: Configuration argument based on config type |
| * @config_arg6: Configuration argument based on config type |
| */ |
| struct coex_config_params { |
| uint32_t vdev_id; |
| uint32_t config_type; |
| uint32_t config_arg1; |
| uint32_t config_arg2; |
| uint32_t config_arg3; |
| uint32_t config_arg4; |
| uint32_t config_arg5; |
| uint32_t config_arg6; |
| }; |
| |
| #define WMI_HOST_PDEV_ID_SOC 0xFF |
| #define WMI_HOST_PDEV_ID_0 0 |
| #define WMI_HOST_PDEV_ID_1 1 |
| #define WMI_HOST_PDEV_ID_2 2 |
| |
| /** |
| * struct tbttoffset_params - Tbttoffset event params |
| * @vdev_id: Virtual AP device identifier |
| * @tbttoffset : Tbttoffset for the virtual AP device |
| */ |
| struct tbttoffset_params { |
| uint32_t vdev_id; |
| uint32_t tbttoffset; |
| }; |
| |
| #define WMI_SCAN_CLIENT_MAX 7 |
| |
| /** |
| * struct wmi_dbs_scan_sel_params - DBS scan selection params |
| * @num_clients: Number of scan clients dutycycle |
| * @pdev_id: pdev_id for identifying the MAC |
| * @module_id: scan client module id |
| * @num_dbs_scans: number of DBS scans |
| * @num_non_dbs_scans: number of non-DBS scans |
| */ |
| struct wmi_dbs_scan_sel_params { |
| uint32_t num_clients; |
| uint32_t pdev_id; |
| uint32_t module_id[WMI_SCAN_CLIENT_MAX]; |
| uint32_t num_dbs_scans[WMI_SCAN_CLIENT_MAX]; |
| uint32_t num_non_dbs_scans[WMI_SCAN_CLIENT_MAX]; |
| }; |
| |
| /** |
| * struct wmi_limit_off_chan_param - limit off channel parameters |
| * @vdev_id: vdev id |
| * @status: status of the command (enable/disable) |
| * @max_offchan_time: max off channel time |
| * @rest_time: home channel time |
| * @skip_dfs_chans: skip dfs channels during scan |
| */ |
| struct wmi_limit_off_chan_param { |
| uint32_t vdev_id; |
| bool status; |
| uint32_t max_offchan_time; |
| uint32_t rest_time; |
| bool skip_dfs_chans; |
| }; |
| |
| /** |
| * struct wmi_mawc_roam_params - Motion Aided wireless connectivity params |
| * @vdev_id: VDEV on which the parameters should be applied |
| * @enable: MAWC roaming feature enable/disable |
| * @traffic_load_threshold: Traffic threshold in kBps for MAWC roaming |
| * @best_ap_rssi_threshold: AP RSSI Threshold for MAWC roaming |
| * @rssi_stationary_high_adjust: High RSSI adjustment value to suppress scan |
| * @rssi_stationary_low_adjust: Low RSSI adjustment value to suppress scan |
| */ |
| struct wmi_mawc_roam_params { |
| uint8_t vdev_id; |
| bool enable; |
| uint32_t traffic_load_threshold; |
| uint32_t best_ap_rssi_threshold; |
| uint8_t rssi_stationary_high_adjust; |
| uint8_t rssi_stationary_low_adjust; |
| }; |
| /** |
| * struct wmi_btm_config - BSS Transition Management offload params |
| * @vdev_id: VDEV on which the parameters should be applied |
| * @btm_offload_config: BTM config |
| * @btm_solicited_timeout: Timeout value for waiting BTM request |
| * @btm_max_attempt_cnt: Maximum attempt for sending BTM query to ESS |
| * @btm_sticky_time: Stick time after roaming to new AP by BTM |
| */ |
| struct wmi_btm_config { |
| uint8_t vdev_id; |
| uint32_t btm_offload_config; |
| uint32_t btm_solicited_timeout; |
| uint32_t btm_max_attempt_cnt; |
| uint32_t btm_sticky_time; |
| }; |
| |
| /** |
| * struct set_arp_stats - set/reset arp stats |
| * @vdev_id: session id |
| * @flag: enable/disable stats |
| * @pkt_type: type of packet(1 - arp) |
| * @ip_addr: subnet ipv4 address in case of encrypted packets |
| */ |
| struct set_arp_stats { |
| uint32_t vdev_id; |
| uint8_t flag; |
| uint8_t pkt_type; |
| uint32_t ip_addr; |
| }; |
| |
| /** |
| * struct get_arp_stats - get arp stats from firmware |
| * @pkt_type: packet type(1 - ARP) |
| * @vdev_id: session id |
| */ |
| struct get_arp_stats { |
| uint8_t pkt_type; |
| uint32_t vdev_id; |
| }; |
| |
| /** |
| * struct wmi_host_ready_ev_param - Data revieved in ready event |
| * @status: FW init status. Success or Failure. |
| * @num_dscp_table: Number of DSCP table supported in FW |
| * @num_extra_mac_addr: Extra mac address present in ready event. Used |
| * in DBDC mode to provide multiple mac per pdev. |
| * @num_total_peer: Total number of peers FW could allocate. Zero means |
| * FW could allocate num peers requested by host in init. |
| * Otherwise, host need update it max_peer to this value. |
| * @num_extra_peer: Number of extra peers created and used within FW. Host |
| * should expect peer_id can be num_total_peer + num_extra_peer |
| * but it can create only upto num_total_peer. |
| * @agile_capability: Boolean specification of whether the target supports |
| * agile DFS, by means of using one 80 MHz radio chain for |
| * radar detection, concurrently with using another radio |
| * chain for non-160 MHz regular operation. |
| */ |
| struct wmi_host_ready_ev_param { |
| uint32_t status; |
| uint32_t num_dscp_table; |
| uint32_t num_extra_mac_addr; |
| uint32_t num_total_peer; |
| uint32_t num_extra_peer; |
| bool agile_capability; |
| }; |
| |
| /** |
| * struct bcn_offload_control - Beacon offload control params |
| * @vdev_id: vdev identifer of VAP to control beacon tx |
| * @bcn_tx_enable: Enable or Disable beacon TX in offload mode |
| */ |
| struct bcn_offload_control { |
| uint32_t vdev_id; |
| bool bcn_tx_enable; |
| }; |
| |
| /** |
| * struct wds_entry - WDS entry structure |
| * @peer_mac: peer mac |
| * @wds_mac: wds mac address |
| * @flags: flags |
| */ |
| struct wdsentry { |
| u_int8_t peer_mac[IEEE80211_ADDR_LEN]; |
| u_int8_t wds_mac[IEEE80211_ADDR_LEN]; |
| A_UINT32 flags; |
| }; |
| |
| #define WMI_HOST_DBR_RING_ADDR_LO_S 0 |
| #define WMI_HOST_DBR_RING_ADDR_LO 0xffffffff |
| |
| #define WMI_HOST_DBR_RING_ADDR_LO_GET(dword) \ |
| WMI_HOST_F_MS(dword, WMI_HOST_DBR_RING_ADDR_LO) |
| #define WMI_HOST_DBR_RING_ADDR_LO_SET(dword, val) \ |
| WMI_HOST_F_RMW(dword, val, WMI_HOST_DBR_RING_ADDR_LO) |
| |
| #define WMI_HOST_DBR_RING_ADDR_HI_S 0 |
| #define WMI_HOST_DBR_RING_ADDR_HI 0xf |
| |
| #define WMI_HOST_DBR_RING_ADDR_HI_GET(dword) \ |
| WMI_HOST_F_MS(dword, WMI_HOST_DBR_RING_ADDR_HI) |
| #define WMI_HOST_DBR_RING_ADDR_HI_SET(dword, val) \ |
| WMI_HOST_F_RMW(dword, val, WMI_HOST_DBR_RING_ADDR_HI) |
| |
| #define WMI_HOST_DBR_DATA_ADDR_LO_S 0 |
| #define WMI_HOST_DBR_DATA_ADDR_LO 0xffffffff |
| |
| #define WMI_HOST_DBR_DATA_ADDR_LO_GET(dword) \ |
| WMI_HOST_F_MS(dword, WMI_HOST_DBR_DATA_ADDR_LO) |
| #define WMI_HOST_DBR_DATA_ADDR_LO_SET(dword, val) \ |
| WMI_HOST_F_RMW(dword, val, WMI_HOST_DBR_DATA_ADDR_LO) |
| |
| #define WMI_HOST_DBR_DATA_ADDR_HI_S 0 |
| #define WMI_HOST_DBR_DATA_ADDR_HI 0xf |
| |
| #define WMI_HOST_DBR_DATA_ADDR_HI_GET(dword) \ |
| WMI_HOST_F_MS(dword, WMI_HOST_DBR_DATA_ADDR_HI) |
| #define WMI_HOST_DBR_DATA_ADDR_HI_SET(dword, val) \ |
| WMI_HOST_F_RMW(dword, val, WMI_HOST_DBR_DATA_ADDR_HI) |
| |
| #define WMI_HOST_DBR_DATA_ADDR_HI_HOST_DATA_S 12 |
| #define WMI_HOST_DBR_DATA_ADDR_HI_HOST_DATA 0xfffff |
| |
| #define WMI_HOST_DBR_DATA_ADDR_HI_HOST_DATA_GET(dword) \ |
| WMI_HOST_F_MS(dword, WMI_HOST_DBR_DATA_ADDR_HI_HOST_DATA) |
| #define WMI_HOST_DBR_DATA_ADDR_HI_HOST_DATA_SET(dword, val) \ |
| WMI_HOST_F_RMW(dword, val, WMI_HOST_DBR_DATA_ADDR_HI_HOST_DATA) |
| |
| /** |
| * struct direct_buf_rx_entry: direct buffer rx release entry structure |
| * |
| * @addr_lo: LSB 32-bits of the buffer |
| * @addr_hi: MSB 32-bits of the buffer |
| * @len: Length of the buffer |
| */ |
| struct direct_buf_rx_entry { |
| uint32_t paddr_lo; |
| uint32_t paddr_hi; |
| uint32_t len; |
| }; |
| |
| /** |
| * struct direct_buf_rx_rsp: direct buffer rx response structure |
| * |
| * @pdev_id: Index of the pdev for which response is received |
| * @mod_mod: Index of the module for which respone is received |
| * @num_buf_release_entry: Number of buffers released through event |
| * @dbr_entries: Pointer to direct buffer rx entry struct |
| */ |
| struct direct_buf_rx_rsp { |
| uint32_t pdev_id; |
| uint32_t mod_id; |
| uint32_t num_buf_release_entry; |
| struct direct_buf_rx_entry *dbr_entries; |
| }; |
| |
| /** |
| * struct direct_buf_rx_cfg_req: direct buffer rx config request structure |
| * |
| * @pdev_id: Index of the pdev for which response is received |
| * @mod_id: Index of the module for which respone is received |
| * @base_paddr_lo: Lower 32bits of ring base address |
| * @base_paddr_hi: Higher 32bits of ring base address |
| * @head_idx_paddr_lo: Lower 32bits of head idx register address |
| * @head_idx_paddr_hi: Higher 32bits of head idx register address |
| * @tail_idx_paddr_lo: Lower 32bits of tail idx register address |
| * @tail_idx_paddr_hi: Higher 32bits of tail idx register address |
| * @buf_size: Size of the buffer for each pointer in the ring |
| * @num_elems: Number of pointers allocated and part of the source ring |
| */ |
| struct direct_buf_rx_cfg_req { |
| uint32_t pdev_id; |
| uint32_t mod_id; |
| uint32_t base_paddr_lo; |
| uint32_t base_paddr_hi; |
| uint32_t head_idx_paddr_lo; |
| uint32_t head_idx_paddr_hi; |
| uint32_t tail_idx_paddr_hi; |
| uint32_t tail_idx_paddr_lo; |
| uint32_t buf_size; |
| uint32_t num_elems; |
| uint32_t event_timeout_ms; |
| uint32_t num_resp_per_event; |
| }; |
| |
| /** |
| * struct wmi_obss_detection_cfg_param - obss detection cfg |
| * @vdev_id: vdev id |
| * @obss_detect_period_ms: detection period in ms |
| * @obss_11b_ap_detect_mode: detect whether there is 11b ap/ibss |
| * @obss_11b_sta_detect_mode: detect whether there is 11b sta |
| * connected with other APs |
| * @obss_11g_ap_detect_mode: detect whether there is 11g AP |
| * @obss_11a_detect_mode: detect whether there is legacy 11a traffic |
| * @obss_ht_legacy_detect_mode: detect whether there is ap which is |
| * ht legacy mode |
| * @obss_ht_mixed_detect_mode: detect whether there is ap which is ht mixed mode |
| * @obss_ht_20mhz_detect_mode: detect whether there is ap which has 20M only |
| * station |
| */ |
| struct wmi_obss_detection_cfg_param { |
| uint32_t vdev_id; |
| uint32_t obss_detect_period_ms; |
| uint32_t obss_11b_ap_detect_mode; |
| uint32_t obss_11b_sta_detect_mode; |
| uint32_t obss_11g_ap_detect_mode; |
| uint32_t obss_11a_detect_mode; |
| uint32_t obss_ht_legacy_detect_mode; |
| uint32_t obss_ht_mixed_detect_mode; |
| uint32_t obss_ht_20mhz_detect_mode; |
| }; |
| |
| /** |
| * enum sap_obss_detection_reason - obss detection event reasons |
| * @OBSS_OFFLOAD_DETECTION_DISABLED: OBSS detection disabled |
| * @OBSS_OFFLOAD_DETECTION_PRESENT: OBSS present detection |
| * @OBSS_OFFLOAD_DETECTION_ABSENT: OBSS absent detection |
| * |
| * Defines different types of reasons for obss detection event from firmware. |
| */ |
| enum wmi_obss_detection_reason { |
| OBSS_OFFLOAD_DETECTION_DISABLED = 0, |
| OBSS_OFFLOAD_DETECTION_PRESENT = 1, |
| OBSS_OFFLOAD_DETECTION_ABSENT = 2, |
| }; |
| |
| /** |
| * struct wmi_obss_detect_info - OBSS detection info from firmware |
| * @vdev_id: IDof the vdev to which this info belongs. |
| * @reason: Indicate if present or Absent detection, |
| * also if not supported offload for this vdev. |
| * @matched_detection_masks: Detection bit map. |
| * @matched_bssid_addr: MAC address valid for only if info is present detection. |
| */ |
| struct wmi_obss_detect_info { |
| uint32_t vdev_id; |
| enum wmi_obss_detection_reason reason; |
| uint32_t matched_detection_masks; |
| uint8_t matched_bssid_addr[IEEE80211_ADDR_LEN]; |
| }; |
| |
| #endif /* _WMI_UNIFIED_PARAM_H_ */ |