qcacmn: Remove WMA header file dependency to fix WIN compilation
Remove dependency of WMA header files in common wmi layer.
Change-Id: I705e3b8cbe048f846c819dc028667061a0ce3ce2
CRs-Fixed: 1008872
diff --git a/wmi_unified_param.h b/wmi_unified_param.h
index bf4e8a3..9bb8dee 100644
--- a/wmi_unified_param.h
+++ b/wmi_unified_param.h
@@ -71,6 +71,8 @@
#define WMI_NOISE_FLOOR_DBM_DEFAULT (-96)
#define WMI_MAC_IPV6_ADDR_LEN 16
#ifdef WLAN_NS_OFFLOAD
+#define WMI_OFFLOAD_DISABLE 0
+#define WMI_OFFLOAD_ENABLE 1
/* support only one IPv6 offload */
#define WMI_MAC_NS_OFFLOAD_SIZE 1
/* Number of target IP V6 addresses for NS offload */
@@ -278,6 +280,17 @@
#define MAX_NUM_CHAN 128
+/* WME stream classes */
+#define WMI_AC_BE 0 /* best effort */
+#define WMI_AC_BK 1 /* background */
+#define WMI_AC_VI 2 /* video */
+#define WMI_AC_VO 3 /* voice */
+#define WMI_TID_TO_AC(_tid) (\
+ (((_tid) == 0) || ((_tid) == 3)) ? WMI_AC_BE : \
+ (((_tid) == 1) || ((_tid) == 2)) ? WMI_AC_BK : \
+ (((_tid) == 4) || ((_tid) == 5)) ? WMI_AC_VI : \
+ WMI_AC_VO)
+
/**
* struct vdev_create_params - vdev create cmd parameter
* @if_id: interface id
@@ -1156,14 +1169,7 @@
void *pdata;
uint16_t desc_id;
uint8_t *macaddr;
-#ifndef WMI_NON_TLV_SUPPORT
- /* Following elements should be moved to WMA
- */
- void *tx_complete_cb;
- void *tx_ota_post_proc_cb;
- struct wmi_desc_t *wmi_desc;
void *qdf_ctx;
-#endif
};
/**
@@ -1743,6 +1749,14 @@
};
/**
+ * enum extscan_configuration_flags - extscan config flags
+ * @WMI_EXTSCAN_LP_EXTENDED_BATCHING: extended batching
+ */
+enum wmi_extscan_configuration_flags {
+ WMI_EXTSCAN_LP_EXTENDED_BATCHING = 0x00000001,
+};
+
+/**
* enum extscan_report_events_type - extscan report events type
* @EXTSCAN_REPORT_EVENTS_BUFFER_FULL: report only when scan history is % full
* @EXTSCAN_REPORT_EVENTS_EACH_SCAN: report a scan completion event after scan
@@ -2088,6 +2102,14 @@
};
#define WMI_CFG_VALID_CHANNEL_LIST_LEN 100
+/* Occupied channel list remains static */
+#define WMI_CHANNEL_LIST_STATIC 1
+/* Occupied channel list can be learnt after init */
+#define WMI_CHANNEL_LIST_DYNAMIC_INIT 2
+/* Occupied channel list can be learnt after flush */
+#define WMI_CHANNEL_LIST_DYNAMIC_FLUSH 3
+/* Occupied channel list can be learnt after update */
+#define WMI_CHANNEL_LIST_DYNAMIC_UPDATE 4
/**
* struct plm_req_params - plm req parameter
@@ -6412,5 +6434,48 @@
uint8_t passive_mon_intval;
uint8_t wifi_act_threshold;
};
+
+/**
+ * struct wmi_fw_dump_seg_req - individual segment details
+ * @seg_id - segment id.
+ * @seg_start_addr_lo - lower address of the segment.
+ * @seg_start_addr_hi - higher address of the segment.
+ * @seg_length - length of the segment.
+ * @dst_addr_lo - lower address of the destination buffer.
+ * @dst_addr_hi - higher address of the destination buffer.
+ *
+ * This structure carries the information to firmware about the
+ * individual segments. This structure is part of firmware memory
+ * dump request.
+ */
+struct wmi_fw_dump_seg_req {
+ uint8_t seg_id;
+ uint32_t seg_start_addr_lo;
+ uint32_t seg_start_addr_hi;
+ uint32_t seg_length;
+ uint32_t dst_addr_lo;
+ uint32_t dst_addr_hi;
+};
+
+/**
+ * enum wmi_userspace_log_level - Log level at userspace
+ * @WMI_LOG_LEVEL_NO_COLLECTION: verbose_level 0 corresponds to no collection
+ * @WMI_LOG_LEVEL_NORMAL_COLLECT: verbose_level 1 correspond to normal log
+ * level with minimal user impact. This is the default value.
+ * @WMI_LOG_LEVEL_ISSUE_REPRO: verbose_level 2 are enabled when user is lazily
+ * trying to reproduce a problem, wifi performances and power can be impacted
+ * but device should not otherwise be significantly impacted
+ * @WMI_LOG_LEVEL_ACTIVE: verbose_level 3+ are used when trying to
+ * actively debug a problem
+ *
+ * Various log levels defined in the userspace for logging applications
+ */
+enum wmi_userspace_log_level {
+ WMI_LOG_LEVEL_NO_COLLECTION,
+ WMI_LOG_LEVEL_NORMAL_COLLECT,
+ WMI_LOG_LEVEL_ISSUE_REPRO,
+ WMI_LOG_LEVEL_ACTIVE,
+};
+
#endif /* _WMI_UNIFIED_PARAM_H_ */