diff --git a/docs/gettingstarted/users/installing/centos.rst b/docs/gettingstarted/users/installing/centos.rst
new file mode 100644
index 0000000..bb69eb9
--- /dev/null
+++ b/docs/gettingstarted/users/installing/centos.rst
@@ -0,0 +1,247 @@
+.. _centos:
+
+.. toctree::
+
+Setup the fd.io Repository - Centos 7
+=====================================
+
+Update the OS
+-------------
+
+It is probably a good idea to update and upgrade the OS before starting:
+
+.. code-block:: console
+
+    $ sudo yum update
+
+
+Point to the Repository
+-----------------------
+
+For CentOS based systems, there are two respositories to pull VPP binaries
+from.
+
+* CentOS NFV SIG Repository
+* Nexus Repository
+
+
+CentOS NFV SIG Repository
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+VPP is not in the official CentOS 7 distro. However, CentOS has Special
+Interest Groups (SIG), which are smaller groups within the CentOS community that
+focus on a small set of issues. The CentOS NFV (Network Function Virtualization)
+SIG was created to provide a CentOS-based stack that will serve as a platform
+for the deployment and testing of virtual network functions (VNFs). VPP has been
+included in this SIG.
+
+To install released packages from the CentOS NFV SIG Repository on an updated
+Centos 7 system, first, install the CentOS NFV SIG FIDO repo file:
+
+.. code-block:: console
+
+    $ sudo yum install centos-release-fdio
+
+then **'Install VPP RPMs'**, as described below.
+
+This will install the latest VPP version from the repository. To install an
+older version, once the CentOS NFV SIG FDIO repo file has been installed, list
+the stored versions:
+
+.. code-block:: console
+
+    $ sudo yum --showduplicates list vpp* | expand
+    Loaded plugins: fastestmirror
+    Loading mirror speeds from cached hostfile
+     * base: repos-va.psychz.net
+     * epel: download-ib01.fedoraproject.org
+     * extras: mirror.siena.edu
+     * updates: repo1.ash.innoscale.net
+    Available Packages
+    vpp.x86_64                                17.10-1                    centos-fdio
+    vpp.x86_64                                18.01.1-1                  centos-fdio
+    vpp.x86_64                                18.01.2-1                  centos-fdio
+    vpp.x86_64                                18.04-1                    centos-fdio
+    vpp-api-java.x86_64                       17.10-1                    centos-fdio
+    vpp-api-java.x86_64                       18.01.1-1                  centos-fdio
+    vpp-api-java.x86_64                       18.01.2-1                  centos-fdio
+    vpp-api-java.x86_64                       18.04-1                    centos-fdio
+    vpp-api-lua.x86_64                        17.10-1                    centos-fdio
+    vpp-api-lua.x86_64                        18.01.1-1                  centos-fdio
+    vpp-api-lua.x86_64                        18.01.2-1                  centos-fdio
+    vpp-api-lua.x86_64                        18.04-1                    centos-fdio
+    vpp-api-python.x86_64                     17.10-1                    centos-fdio
+    vpp-api-python.x86_64                     18.01.1-1                  centos-fdio
+    vpp-api-python.x86_64                     18.01.2-1                  centos-fdio
+    vpp-api-python.x86_64                     18.04-1                    centos-fdio
+    vpp-devel.x86_64                          17.10-1                    centos-fdio
+    vpp-devel.x86_64                          18.01.1-1                  centos-fdio
+    vpp-devel.x86_64                          18.01.2-1                  centos-fdio
+    vpp-devel.x86_64                          18.04-1                    centos-fdio
+    vpp-lib.x86_64                            17.10-1                    centos-fdio
+    vpp-lib.x86_64                            18.01.1-1                  centos-fdio
+    vpp-lib.x86_64                            18.01.2-1                  centos-fdio
+    vpp-lib.x86_64                            18.04-1                    centos-fdio
+    vpp-plugins.x86_64                        17.10-1                    centos-fdio
+    vpp-plugins.x86_64                        18.01.1-1                  centos-fdio
+    vpp-plugins.x86_64                        18.01.2-1                  centos-fdio
+    vpp-plugins.x86_64                        18.04-1                    centos-fdio
+    vpp-selinux-policy.x86_64                 18.04-1                    centos-fdio
+
+Then install a particular version:
+
+.. code-block:: console
+
+    $ sudo yum install vpp-17.10-1.x86_64
+
+
+Nexus Repository
+^^^^^^^^^^^^^^^^
+
+Build artifacts are also posted to a FD.io Nexus Repository. This includes
+official point releases, as well as nightly builds. To use any of these build
+artifacts, create a file *'/etc/yum.repos.d/fdio-release.repo'* with the
+content that points to the version needed. Below are some common examples of
+the content needed:
+
+
+VPP Latest Release
+""""""""""""""""""
+
+To allow *'yum'* access to the official VPP releases, create the file
+*'/etc/yum.repos.d/fdio-release.repo'* with the following content:
+
+.. code-block:: console
+
+   $ cat /etc/yum.repos.d/fdio-release.repo
+   [fdio-release]
+   name=fd.io release branch latest merge
+   baseurl=https://nexus.fd.io/content/repositories/fd.io.centos7/
+   enabled=1
+   gpgcheck=0
+
+The *'yum install vpp'* command will install the most recent release. To
+install older releases, run the following command to get the list of releases
+provided:
+
+.. code-block:: console
+
+   $ sudo yum --showduplicates list vpp* | expand
+
+Then choose the release to install. See **'CentOS NFV SIG Repository'** for
+sample *'yum --showduplicates list'* output and an example of installing a
+particular version of the RPMs.
+
+VPP Stable Branch
+"""""""""""""""""
+
+To allow *yum* access to the build artifacts for a VPP stable branch, create
+the file *'/etc/yum.repos.d/fdio-release.repo'* with the following content:
+
+.. code-block:: console
+
+   $ cat /etc/yum.repos.d/fdio-release.repo
+   [fdio-stable-1804]
+   name=fd.io stable/1804 branch latest merge
+   baseurl=https://nexus.fd.io/content/repositories/fd.io.stable.1804.centos7/
+   enabled=1
+   gpgcheck=0
+
+For other stable branches, replace the *'1804'* from the above content with the
+desired release. Examples: 1606, 1609, 1701, 1704, 1707, 1710, 1804, 1807
+
+The *'yum install vpp'* command will install the most recent build on the
+branch, not the latest offical release. Run the following command to get the
+list of images produce by the branch:
+
+.. code-block:: console
+
+   $ sudo yum --showduplicates list vpp* | expand
+
+Then choose the image to install. See **'CentOS NFV SIG Repository'** for
+sample *'yum --showduplicates list'* output and an example of installing a
+particular version of the RPMs.
+
+
+VPP Master Branch
+"""""""""""""""""
+
+To allow *yum* access to the nightly builds from the VPP master branch, create
+the file *'/etc/yum.repos.d/fdio-release.repo'* with the following content:
+
+.. code-block:: console
+
+   $ cat /etc/yum.repos.d/fdio-release.repo
+   [fdio-master]
+   name=fd.io master branch latest merge
+   baseurl=https://nexus.fd.io/content/repositories/fd.io.master.centos7/
+   enabled=1
+   gpgcheck=0
+
+The *'yum install vpp'* command will install the most recent build on the
+branch. Run the following command to get the list of images produce by the
+branch:
+
+.. code-block:: console
+
+   $ sudo yum --showduplicates list vpp* | expand
+
+Then choose the image to install. See **'CentOS NFV SIG Repository'** for
+sample *'yum --showduplicates list'* output and an example of installing a
+particular version of the RPMs.
+
+
+Install VPP RPMs
+================
+
+To install the VPP packet engine, run the following:
+
+.. code-block:: console
+
+   $ sudo yum install vpp
+
+The **'vpp'** RPM depend on the **'vpp-lib'** and **'vpp-selinux-policy'**
+RPMs, so they will be installed as well.
+
+.. note::
+
+    The **'vpp-selinux-policy'** will not enable SELinux on the system. It
+    will install a Custom VPP SELinux policy that will be used if SELinux is
+    enabled at any time.
+
+There are additional packages that are optional. These packages can be
+combined with the command above and installed all at once, or installed as
+needed: 
+
+.. code-block:: console
+
+   $ sudo yum install vpp-plugins vpp-devel vpp-api-python vpp-api-lua vpp-api-java
+
+Starting VPP
+============
+
+Once VPP is installed on the system, to run VPP as a systemd service on CentOS,
+run:
+
+.. code-block:: console
+
+   $ sudo systemctl start vpp
+
+Then to enable VPP to start on system reboot:
+
+.. code-block:: console
+
+   $ sudo systemctl enable vpp
+
+
+Outside of running VPP as a systemd service, VPP can be started manually or
+made to run within GDB for debugging. See :ref:`running` for more details and
+ways to tailor VPP to a specific system.
+
+
+Uninstall the VPP RPMs
+======================
+
+.. code-block:: console
+
+   $ sudo yum autoremove vpp*
diff --git a/docs/gettingstarted/users/installing/index.rst b/docs/gettingstarted/users/installing/index.rst
new file mode 100644
index 0000000..7636ec8
--- /dev/null
+++ b/docs/gettingstarted/users/installing/index.rst
@@ -0,0 +1,47 @@
+.. _installing:
+
+.. toctree::
+
+Installing VPP from Packages
+============================
+
+If you are simply using vpp, it can be convenient to install the binaries from
+existing packages. This guide will describe how pull, install and run the VPP
+packages.
+
+.. toctree::
+
+Package Descriptions
+--------------------
+The following is a brief description of the packages to be installed with VPP.
+
+.. toctree::
+
+   packages
+
+Installing VPP Binaries
+-----------------------
+
+Installing on Ubuntu
+^^^^^^^^^^^^^^^^^^^^
+The following are instructions on how to install VPP on Ubuntu.
+
+.. toctree::
+
+   ubuntu
+
+Installing on Centos
+^^^^^^^^^^^^^^^^^^^^
+The following are instructions on how to install VPP on Centos.
+
+.. toctree::
+
+   centos
+
+Installing on openSUSE
+^^^^^^^^^^^^^^^^^^^^^^
+The following are instructions on how to install VPP on openSUSE.
+
+.. toctree::
+
+   opensuse
diff --git a/docs/gettingstarted/users/installing/opensuse.rst b/docs/gettingstarted/users/installing/opensuse.rst
new file mode 100644
index 0000000..8e91ebd
--- /dev/null
+++ b/docs/gettingstarted/users/installing/opensuse.rst
@@ -0,0 +1,51 @@
+.. _opensuse:
+
+.. toctree::
+
+Installing
+==========
+Top install VPP on openSUSE first pick the following release and execute the appropriate commands.
+
+openSUSE Tumbleweed (rolling release)
+-------------------------------------
+
+.. code-block:: console
+
+   sudo zypper install vpp vpp-plugins
+
+openSUSE Leap 42.3
+------------------
+
+.. code-block:: console
+
+   sudo zypper addrepo --name network https://download.opensuse.org/repositories/network/openSUSE_Leap_42.3/network.repo
+   sudo zypper install vpp vpp-plugins
+
+Uninstall
+=========
+
+.. code-block:: console
+
+   sudo zypper remove -u vpp vpp-plugins
+
+openSUSE Tumbleweed (rolling release)
+-------------------------------------
+
+.. code-block:: console
+
+   sudo zypper remove -u vpp vpp-plugins
+
+openSUSE Leap 42.3
+------------------
+
+.. code-block:: console
+
+   sudo zypper remove -u vpp vpp-plugins
+   sudo zypper removerepo network
+
+For More Information
+====================
+For more information on VPP with openSUSE, please look at the following post.
+
+* https://www.suse.com/communities/blog/vector-packet-processing-vpp-opensuse/
+
diff --git a/docs/gettingstarted/users/installing/packages.rst b/docs/gettingstarted/users/installing/packages.rst
new file mode 100644
index 0000000..d67ff60
--- /dev/null
+++ b/docs/gettingstarted/users/installing/packages.rst
@@ -0,0 +1,83 @@
+.. _packages:
+
+Packages
+========
+
+.. toctree::
+
+vpp
+---
+
+Vector Packet Processing executables. This is the primary package that must be
+installed to use VPP. This package contains:
+
+* vpp - the vector packet engine
+* vpp_api_test - vector packet engine API test tool
+* vpp_json_test - vector packet engine JSON test tool
+
+vpp-lib
+-------
+
+Vector Packet Processing runtime libraries. The *'vpp'* package depends on this
+package, so it will always be installed. This package contains the VPP shared
+libraries, including:
+
+* vppinfra - Foundation library supporting vectors, hashes, bitmaps, pools, and string formatting.
+* svm - vm library
+* vlib - vector processing library
+* vlib-api - binary API library
+* vnet -  network stack library
+
+vpp-plugins
+-----------
+
+Vector Packet Processing plugin modules.
+
+* acl
+* dpdk
+* flowprobe
+* gtpu
+* ixge
+* kubeproxy
+* l2e
+* lb
+* memif
+* nat
+* pppoe
+* sixrd
+* stn
+
+vpp-dbg
+-------
+
+Vector Packet Processing debug symbols.
+
+vpp-dev
+-------
+
+Vector Packet Processing development support. This package contains
+development support files for the VPP libraries.
+
+vpp-api-java
+------------
+
+JAVA binding for the VPP Binary API.
+
+vpp-api-python 
+--------------
+
+Python binding for the VPP Binary API.
+
+vpp-api-lua
+-----------
+
+Lua binding for the VPP Binary API.
+
+vpp-selinux-policy
+------------------
+
+This package contains the VPP Custom SELinux Policy. It is only generated for
+Fedora and CentOS distros. For those distros, the *'vpp'* package depends on
+this package, so it will always be installed. It will not enable SELinux on
+the system. It will install a Custom VPP SELinux policy that will be used if
+SELinux is enabled at any time.
diff --git a/docs/gettingstarted/users/installing/ubuntu.rst b/docs/gettingstarted/users/installing/ubuntu.rst
new file mode 100644
index 0000000..9c082e6
--- /dev/null
+++ b/docs/gettingstarted/users/installing/ubuntu.rst
@@ -0,0 +1,81 @@
+.. _ubuntu:
+
+.. toctree::
+ 
+Ubuntu 16.04 - Setup the fd.io Repository
+=========================================
+
+From the following choose one of the releases to install.
+
+
+Update the OS
+-------------
+
+It is probably a good idea to update and upgrade the OS before starting
+
+.. code-block:: console
+
+    apt-get update
+
+
+Point to the Repository
+-----------------------
+
+Create a file **"/etc/apt/sources.list.d/99fd.io.list"** with the contents that point to
+the version needed. The contents needed are shown below.
+
+.. _install_vpp:
+
+VPP latest Release
+^^^^^^^^^^^^^^^^^^
+
+Create the file **/etc/apt/sources.list.d/99fd.io.list** with contents:
+
+.. code-block:: console
+
+   deb [trusted=yes] https://nexus.fd.io/content/repositories/fd.io.ubuntu.xenial.main/ ./
+
+
+VPP stable/1804 Branch
+^^^^^^^^^^^^^^^^^^^^^^
+
+Create the file **/etc/apt/sources.list.d/99fd.io.list** with contents:
+
+.. code-block:: console
+
+   deb [trusted=yes] https://nexus.fd.io/content/repositories/fd.io.stable.1804.ubuntu.xenial.main/ ./
+
+
+VPP master Branch
+^^^^^^^^^^^^^^^^^
+
+Create the file **/etc/apt/sources.list.d/99fd.io.list** with contents:
+
+.. code-block:: console
+
+   deb [trusted=yes] https://nexus.fd.io/content/repositories/fd.io.master.ubuntu.xenial.main/ ./
+
+
+Install the Mandatory Packages
+==============================
+
+.. code-block:: console
+
+  sudo apt-get update
+  sudo apt-get install vpp vpp-lib vpp-plugin
+
+
+Install the Optional Packages
+=============================
+
+.. code-block:: console
+
+  sudo apt-get install vpp-dbg vpp-dev vpp-api-java vpp-api-python vpp-api-lua
+
+
+Uninstall the Packages
+======================
+
+.. code-block:: console
+
+  sudo apt-get remove --purge vpp*