docs/reference/cmdreference/vhost/vhostuser.rst - fdio/vpp - Gitiles

 .. _vhostusercommands:

 .. toctree::

 .. _createvhostuser:

 Create Vhost-User
 =================

 Create a vHost User interface. Once created, a new virtual interface
 will exist with the name '*VirtualEthernet0/0/x*', where '*x*' is the
 next free index.

 There are several parameters associated with a vHost interface:

 -  **socket <socket-filename>** - Name of the linux socket used by
    hypervisor and VPP to manage the vHost interface. If in '*server*'
    mode, VPP will create the socket if it does not already exist. If in
    '*client*' mode, hypervisor will create the socket if it does not
    already exist. The VPP code is indifferent to the file location.
    However, if SELinux is enabled, then the socket needs to be created
    in '*/var/run/vpp/*'.
 -  **server** - Optional flag to indicate that VPP should be the server
    for the linux socket. If not provided, VPP will be the client. In
    '*server*' mode, the VM can be reset without tearing down the vHost
    Interface. In '*client*' mode, VPP can be reset without bringing down
    the VM and tearing down the vHost Interface.
 -  **feature-mask <hex>** - Optional virtio/vhost feature set negotiated
    at startup. **This is intended for degugging only.** It is
    recommended that this parameter not be used except by experienced
    users. By default, all supported features will be advertised.
    Otherwise, provide the set of features desired.

    -  0x000008000 (15) - VIRTIO_NET_F_MRG_RXBUF
    -  0x000020000 (17) - VIRTIO_NET_F_CTRL_VQ
    -  0x000200000 (21) - VIRTIO_NET_F_GUEST_ANNOUNCE
    -  0x000400000 (22) - VIRTIO_NET_F_MQ
    -  0x004000000 (26) - VHOST_F_LOG_ALL
    -  0x008000000 (27) - VIRTIO_F_ANY_LAYOUT
    -  0x010000000 (28) - VIRTIO_F_INDIRECT_DESC
    -  0x040000000 (30) - VHOST_USER_F_PROTOCOL_FEATURES
    -  0x100000000 (32) - VIRTIO_F_VERSION_1

 -  **hwaddr <mac-addr>** - Optional ethernet address, can be in either
    X:X:X:X:X:X unix or X.X.X cisco format.
 -  **renumber <dev_instance>** - Optional parameter which allows the
    instance in the name to be specified. If instance already exists,
    name will be used anyway and multiple instances will have the same
    name. Use with caution.


 Summary/Usage
 -------------

 .. code-block:: shell

     create vhost-user socket <socket-filename> [server] [feature-mask <hex>] [hwaddr <mac-addr>] [renumber <dev_instance>]


 Examples
 --------

     Example of how to create a vhost interface with VPP as the client
     and all features enabled:

 .. code-block:: console

     vpp# create vhost-user socket /var/run/vpp/vhost1.sock
     VirtualEthernet0/0/0

 Example of how to create a vhost interface with VPP as the server
 and with just multiple queues enabled:

 .. code-block:: console

     vpp# create vhost-user socket /var/run/vpp/vhost2.sock server feature-mask 0x40400000
     VirtualEthernet0/0/1

 Once the vHost interface is created, enable the interface using:

 .. code-block:: console

     vpp# set interface state VirtualEthernet0/0/0 up

 .. _showvhost:

 Show Vhost-User
 ===============

 Display the attributes of a single vHost User interface (provide
 interface name), multiple vHost User interfaces (provide a list of
 interface names seperated by spaces) or all Vhost User interfaces (omit
 an interface name to display all vHost interfaces).

 Summary/Usage
 -------------

 .. code-block:: shell

     show vhost-user [<interface> [<interface> [..]]] [descriptors].

 Examples
 --------
 Example of how to display a vhost interface:

 .. code-block:: console

     vpp# show vhost-user VirtualEthernet0/0/0
     Virtio vhost-user interfaces
     Global:
       coalesce frames 32 time 1e-3
     Interface: VirtualEthernet0/0/0 (ifindex 1)
     virtio_net_hdr_sz 12
      features mask (0xffffffffffffffff):
      features (0x50408000):
        VIRTIO_NET_F_MRG_RXBUF (15)
        VIRTIO_NET_F_MQ (22)
        VIRTIO_F_INDIRECT_DESC (28)
        VHOST_USER_F_PROTOCOL_FEATURES (30)
       protocol features (0x3)
        VHOST_USER_PROTOCOL_F_MQ (0)
        VHOST_USER_PROTOCOL_F_LOG_SHMFD (1)

      socket filename /var/run/vpp/vhost1.sock type client errno "Success"

     rx placement:
        thread 1 on vring 1
        thread 1 on vring 5
        thread 2 on vring 3
        thread 2 on vring 7
      tx placement: spin-lock
        thread 0 on vring 0
        thread 1 on vring 2
        thread 2 on vring 0

     Memory regions (total 2)
     region fd    guest_phys_addr    memory_size        userspace_addr     mmap_offset        mmap_addr
     ====== ===== ================== ================== ================== ================== ==================
       0     60    0x0000000000000000 0x00000000000a0000 0x00002aaaaac00000 0x0000000000000000 0x00002aab2b400000
       1     61    0x00000000000c0000 0x000000003ff40000 0x00002aaaaacc0000 0x00000000000c0000 0x00002aababcc0000

      Virtqueue 0 (TX)
       qsz 256 last_avail_idx 0 last_used_idx 0
       avail.flags 1 avail.idx 128 used.flags 1 used.idx 0
       kickfd 62 callfd 64 errfd -1

      Virtqueue 1 (RX)
       qsz 256 last_avail_idx 0 last_used_idx 0
       avail.flags 1 avail.idx 0 used.flags 1 used.idx 0
       kickfd 65 callfd 66 errfd -1

      Virtqueue 2 (TX)
       qsz 256 last_avail_idx 0 last_used_idx 0
       avail.flags 1 avail.idx 128 used.flags 1 used.idx 0
       kickfd 63 callfd 70 errfd -1

      Virtqueue 3 (RX)
       qsz 256 last_avail_idx 0 last_used_idx 0
       avail.flags 1 avail.idx 0 used.flags 1 used.idx 0
       kickfd 72 callfd 74 errfd -1

      Virtqueue 4 (TX disabled)
       qsz 256 last_avail_idx 0 last_used_idx 0
       avail.flags 1 avail.idx 0 used.flags 1 used.idx 0
       kickfd 76 callfd 78 errfd -1

      Virtqueue 5 (RX disabled)
       qsz 256 last_avail_idx 0 last_used_idx 0
       avail.flags 1 avail.idx 0 used.flags 1 used.idx 0
       kickfd 80 callfd 82 errfd -1

      Virtqueue 6 (TX disabled)
       qsz 256 last_avail_idx 0 last_used_idx 0
      avail.flags 1 avail.idx 0 used.flags 1 used.idx 0
       kickfd 84 callfd 86 errfd -1

      Virtqueue 7 (RX disabled)
       qsz 256 last_avail_idx 0 last_used_idx 0
       avail.flags 1 avail.idx 0 used.flags 1 used.idx 0
       kickfd 88 callfd 90 errfd -1

 The optional '*descriptors*' parameter will display the same output as the
 previous example but will include the descriptor table for each queue. The output is truncated below:

 .. code-block:: console

     vpp# show vhost-user VirtualEthernet0/0/0 descriptors

     Virtio vhost-user interfaces
     Global:
       coalesce frames 32 time 1e-3
     Interface: VirtualEthernet0/0/0 (ifindex 1)
     virtio_net_hdr_sz 12
      features mask (0xffffffffffffffff):
      features (0x50408000):
        VIRTIO_NET_F_MRG_RXBUF (15)
        VIRTIO_NET_F_MQ (22)
     :
      Virtqueue 0 (TX)
       qsz 256 last_avail_idx 0 last_used_idx 0
       avail.flags 1 avail.idx 128 used.flags 1 used.idx 0
       kickfd 62 callfd 64 errfd -1

       descriptor table:
        id          addr         len  flags  next      user_addr
       ===== ================== ===== ====== ===== ==================
       0     0x0000000010b6e974 2060  0x0002 1     0x00002aabbc76e974
       1     0x0000000010b6e034 2060  0x0002 2     0x00002aabbc76e034
       2     0x0000000010b6d6f4 2060  0x0002 3     0x00002aabbc76d6f4
       3     0x0000000010b6cdb4 2060  0x0002 4     0x00002aabbc76cdb4
       4     0x0000000010b6c474 2060  0x0002 5     0x00002aabbc76c474
       5     0x0000000010b6bb34 2060  0x0002 6     0x00002aabbc76bb34
       6     0x0000000010b6b1f4 2060  0x0002 7     0x00002aabbc76b1f4
       7     0x0000000010b6a8b4 2060  0x0002 8     0x00002aabbc76a8b4
       8     0x0000000010b69f74 2060  0x0002 9     0x00002aabbc769f74
       9     0x0000000010b69634 2060  0x0002 10    0x00002aabbc769634
       10    0x0000000010b68cf4 2060  0x0002 11    0x00002aabbc768cf4
     :
       249   0x0000000000000000 0     0x0000 250   0x00002aab2b400000
       250   0x0000000000000000 0     0x0000 251   0x00002aab2b400000
       251   0x0000000000000000 0     0x0000 252   0x00002aab2b400000
       252   0x0000000000000000 0     0x0000 253   0x00002aab2b400000
       253   0x0000000000000000 0     0x0000 254   0x00002aab2b400000
       254   0x0000000000000000 0     0x0000 255   0x00002aab2b400000
       255   0x0000000000000000 0     0x0000 32768 0x00002aab2b400000

      Virtqueue 1 (RX)
       qsz 256 last_avail_idx 0 last_used_idx 0


 Debug Vhost-User
 ================
 Turn on/off debug for vhost


 Summary/Usage
 -------------

 .. code-block:: shell

     debug vhost-user <on | off>.

 Delete Vhost-User
 ========================
 Delete a vHost User interface using the interface name or the software
 interface index. Use the '*show interface*' command to determine the
 software interface index. On deletion, the linux socket will not be
 deleted.

 Summary/Usage
 -------------

 .. code-block:: shell

     delete vhost-user {<interface> | sw_if_index <sw_idx>}.

 Examples
 --------
 Example of how to delete a vhost interface by name:

 .. code-block:: console

     vpp# delete vhost-user VirtualEthernet0/0/1

 Example of how to delete a vhost interface by software interface index:

 .. code-block:: console

     vpp# delete vhost-user sw_if_index 1
	.. _vhostusercommands:

	.. toctree::

	.. _createvhostuser:

	Create Vhost-User
	=================

	Create a vHost User interface. Once created, a new virtual interface
	will exist with the name 'VirtualEthernet0/0/x', where 'x' is the
	next free index.

	There are several parameters associated with a vHost interface:

	- socket <socket-filename> - Name of the linux socket used by
	hypervisor and VPP to manage the vHost interface. If in 'server'
	mode, VPP will create the socket if it does not already exist. If in
	'client' mode, hypervisor will create the socket if it does not
	already exist. The VPP code is indifferent to the file location.
	However, if SELinux is enabled, then the socket needs to be created
	in '/var/run/vpp/'.
	- server - Optional flag to indicate that VPP should be the server
	for the linux socket. If not provided, VPP will be the client. In
	'server' mode, the VM can be reset without tearing down the vHost
	Interface. In 'client' mode, VPP can be reset without bringing down
	the VM and tearing down the vHost Interface.
	- feature-mask <hex> - Optional virtio/vhost feature set negotiated
	at startup. This is intended for degugging only. It is
	recommended that this parameter not be used except by experienced
	users. By default, all supported features will be advertised.
	Otherwise, provide the set of features desired.

	- 0x000008000 (15) - VIRTIO_NET_F_MRG_RXBUF
	- 0x000020000 (17) - VIRTIO_NET_F_CTRL_VQ
	- 0x000200000 (21) - VIRTIO_NET_F_GUEST_ANNOUNCE
	- 0x000400000 (22) - VIRTIO_NET_F_MQ
	- 0x004000000 (26) - VHOST_F_LOG_ALL
	- 0x008000000 (27) - VIRTIO_F_ANY_LAYOUT
	- 0x010000000 (28) - VIRTIO_F_INDIRECT_DESC
	- 0x040000000 (30) - VHOST_USER_F_PROTOCOL_FEATURES
	- 0x100000000 (32) - VIRTIO_F_VERSION_1

	- hwaddr <mac-addr> - Optional ethernet address, can be in either
	X:X:X:X:X:X unix or X.X.X cisco format.
	- renumber <dev_instance> - Optional parameter which allows the
	instance in the name to be specified. If instance already exists,
	name will be used anyway and multiple instances will have the same
	name. Use with caution.


	Summary/Usage
	-------------

	.. code-block:: shell

	create vhost-user socket <socket-filename> [server] [feature-mask <hex>] [hwaddr <mac-addr>] [renumber <dev_instance>]


	Examples
	--------

	Example of how to create a vhost interface with VPP as the client
	and all features enabled:

	.. code-block:: console

	vpp# create vhost-user socket /var/run/vpp/vhost1.sock
	VirtualEthernet0/0/0

	Example of how to create a vhost interface with VPP as the server
	and with just multiple queues enabled:

	.. code-block:: console

	vpp# create vhost-user socket /var/run/vpp/vhost2.sock server feature-mask 0x40400000
	VirtualEthernet0/0/1

	Once the vHost interface is created, enable the interface using:

	.. code-block:: console

	vpp# set interface state VirtualEthernet0/0/0 up

	.. _showvhost:

	Show Vhost-User
	===============

	Display the attributes of a single vHost User interface (provide
	interface name), multiple vHost User interfaces (provide a list of
	interface names seperated by spaces) or all Vhost User interfaces (omit
	an interface name to display all vHost interfaces).

	Summary/Usage
	-------------

	.. code-block:: shell

	show vhost-user [<interface> [<interface> [..]]] [descriptors].

	Examples
	--------
	Example of how to display a vhost interface:

	.. code-block:: console

	vpp# show vhost-user VirtualEthernet0/0/0
	Virtio vhost-user interfaces
	Global:
	coalesce frames 32 time 1e-3
	Interface: VirtualEthernet0/0/0 (ifindex 1)
	virtio_net_hdr_sz 12
	features mask (0xffffffffffffffff):
	features (0x50408000):
	VIRTIO_NET_F_MRG_RXBUF (15)
	VIRTIO_NET_F_MQ (22)
	VIRTIO_F_INDIRECT_DESC (28)
	VHOST_USER_F_PROTOCOL_FEATURES (30)
	protocol features (0x3)
	VHOST_USER_PROTOCOL_F_MQ (0)
	VHOST_USER_PROTOCOL_F_LOG_SHMFD (1)

	socket filename /var/run/vpp/vhost1.sock type client errno "Success"

	rx placement:
	thread 1 on vring 1
	thread 1 on vring 5
	thread 2 on vring 3
	thread 2 on vring 7
	tx placement: spin-lock
	thread 0 on vring 0
	thread 1 on vring 2
	thread 2 on vring 0

	Memory regions (total 2)
	region fd guest_phys_addr memory_size userspace_addr mmap_offset mmap_addr
	====== ===== ================== ================== ================== ================== ==================
	0 60 0x0000000000000000 0x00000000000a0000 0x00002aaaaac00000 0x0000000000000000 0x00002aab2b400000
	1 61 0x00000000000c0000 0x000000003ff40000 0x00002aaaaacc0000 0x00000000000c0000 0x00002aababcc0000

	Virtqueue 0 (TX)
	qsz 256 last_avail_idx 0 last_used_idx 0
	avail.flags 1 avail.idx 128 used.flags 1 used.idx 0
	kickfd 62 callfd 64 errfd -1

	Virtqueue 1 (RX)
	qsz 256 last_avail_idx 0 last_used_idx 0
	avail.flags 1 avail.idx 0 used.flags 1 used.idx 0
	kickfd 65 callfd 66 errfd -1

	Virtqueue 2 (TX)
	qsz 256 last_avail_idx 0 last_used_idx 0
	avail.flags 1 avail.idx 128 used.flags 1 used.idx 0
	kickfd 63 callfd 70 errfd -1

	Virtqueue 3 (RX)
	qsz 256 last_avail_idx 0 last_used_idx 0
	avail.flags 1 avail.idx 0 used.flags 1 used.idx 0
	kickfd 72 callfd 74 errfd -1

	Virtqueue 4 (TX disabled)
	qsz 256 last_avail_idx 0 last_used_idx 0
	avail.flags 1 avail.idx 0 used.flags 1 used.idx 0
	kickfd 76 callfd 78 errfd -1

	Virtqueue 5 (RX disabled)
	qsz 256 last_avail_idx 0 last_used_idx 0
	avail.flags 1 avail.idx 0 used.flags 1 used.idx 0
	kickfd 80 callfd 82 errfd -1

	Virtqueue 6 (TX disabled)
	qsz 256 last_avail_idx 0 last_used_idx 0
	avail.flags 1 avail.idx 0 used.flags 1 used.idx 0
	kickfd 84 callfd 86 errfd -1

	Virtqueue 7 (RX disabled)
	qsz 256 last_avail_idx 0 last_used_idx 0
	avail.flags 1 avail.idx 0 used.flags 1 used.idx 0
	kickfd 88 callfd 90 errfd -1

	The optional 'descriptors' parameter will display the same output as the
	previous example but will include the descriptor table for each queue. The output is truncated below:

	.. code-block:: console

	vpp# show vhost-user VirtualEthernet0/0/0 descriptors

	Virtio vhost-user interfaces
	Global:
	coalesce frames 32 time 1e-3
	Interface: VirtualEthernet0/0/0 (ifindex 1)
	virtio_net_hdr_sz 12
	features mask (0xffffffffffffffff):
	features (0x50408000):
	VIRTIO_NET_F_MRG_RXBUF (15)
	VIRTIO_NET_F_MQ (22)
	:
	Virtqueue 0 (TX)
	qsz 256 last_avail_idx 0 last_used_idx 0
	avail.flags 1 avail.idx 128 used.flags 1 used.idx 0
	kickfd 62 callfd 64 errfd -1

	descriptor table:
	id addr len flags next user_addr
	===== ================== ===== ====== ===== ==================
	0 0x0000000010b6e974 2060 0x0002 1 0x00002aabbc76e974
	1 0x0000000010b6e034 2060 0x0002 2 0x00002aabbc76e034
	2 0x0000000010b6d6f4 2060 0x0002 3 0x00002aabbc76d6f4
	3 0x0000000010b6cdb4 2060 0x0002 4 0x00002aabbc76cdb4
	4 0x0000000010b6c474 2060 0x0002 5 0x00002aabbc76c474
	5 0x0000000010b6bb34 2060 0x0002 6 0x00002aabbc76bb34
	6 0x0000000010b6b1f4 2060 0x0002 7 0x00002aabbc76b1f4
	7 0x0000000010b6a8b4 2060 0x0002 8 0x00002aabbc76a8b4
	8 0x0000000010b69f74 2060 0x0002 9 0x00002aabbc769f74
	9 0x0000000010b69634 2060 0x0002 10 0x00002aabbc769634
	10 0x0000000010b68cf4 2060 0x0002 11 0x00002aabbc768cf4
	:
	249 0x0000000000000000 0 0x0000 250 0x00002aab2b400000
	250 0x0000000000000000 0 0x0000 251 0x00002aab2b400000
	251 0x0000000000000000 0 0x0000 252 0x00002aab2b400000
	252 0x0000000000000000 0 0x0000 253 0x00002aab2b400000
	253 0x0000000000000000 0 0x0000 254 0x00002aab2b400000
	254 0x0000000000000000 0 0x0000 255 0x00002aab2b400000
	255 0x0000000000000000 0 0x0000 32768 0x00002aab2b400000

	Virtqueue 1 (RX)
	qsz 256 last_avail_idx 0 last_used_idx 0


	Debug Vhost-User
	================
	Turn on/off debug for vhost


	Summary/Usage
	-------------

	.. code-block:: shell

	debug vhost-user <on \| off>.

	Delete Vhost-User
	========================
	Delete a vHost User interface using the interface name or the software
	interface index. Use the 'show interface' command to determine the
	software interface index. On deletion, the linux socket will not be
	deleted.

	Summary/Usage
	-------------

	.. code-block:: shell

	delete vhost-user {<interface> \| sw_if_index <sw_idx>}.

	Examples
	--------
	Example of how to delete a vhost interface by name:

	.. code-block:: console

	vpp# delete vhost-user VirtualEthernet0/0/1

	Example of how to delete a vhost interface by software interface index:

	.. code-block:: console

	vpp# delete vhost-user sw_if_index 1