| #!/usr/bin/env python3 |
| """ BFD tests """ |
| |
| from __future__ import division |
| |
| import binascii |
| import hashlib |
| import ipaddress |
| import reprlib |
| import time |
| import unittest |
| from random import randint, shuffle, getrandbits |
| from socket import AF_INET, AF_INET6, inet_ntop |
| from struct import pack, unpack |
| |
| import scapy.compat |
| from scapy.layers.inet import UDP, IP |
| from scapy.layers.inet6 import IPv6 |
| from scapy.layers.l2 import Ether, GRE |
| from scapy.packet import Raw |
| |
| from bfd import VppBFDAuthKey, BFD, BFDAuthType, VppBFDUDPSession, \ |
| BFDDiagCode, BFDState, BFD_vpp_echo |
| from framework import VppTestCase, VppTestRunner, running_extended_tests |
| from framework import tag_run_solo |
| from util import ppp |
| from vpp_ip import DpoProto |
| from vpp_ip_route import VppIpRoute, VppRoutePath |
| from vpp_lo_interface import VppLoInterface |
| from vpp_papi_provider import UnexpectedApiReturnValueError, \ |
| CliFailedCommandError |
| from vpp_pg_interface import CaptureTimeoutError, is_ipv6_misc |
| from vpp_gre_interface import VppGreInterface |
| from vpp_papi import VppEnum |
| |
| USEC_IN_SEC = 1000000 |
| |
| |
| class AuthKeyFactory(object): |
| """Factory class for creating auth keys with unique conf key ID""" |
| |
| def __init__(self): |
| self._conf_key_ids = {} |
| |
| def create_random_key(self, test, auth_type=BFDAuthType.keyed_sha1): |
| """ create a random key with unique conf key id """ |
| conf_key_id = randint(0, 0xFFFFFFFF) |
| while conf_key_id in self._conf_key_ids: |
| conf_key_id = randint(0, 0xFFFFFFFF) |
| self._conf_key_ids[conf_key_id] = 1 |
| key = scapy.compat.raw( |
| bytearray([randint(0, 255) for _ in range(randint(1, 20))])) |
| return VppBFDAuthKey(test=test, auth_type=auth_type, |
| conf_key_id=conf_key_id, key=key) |
| |
| |
| class BFDAPITestCase(VppTestCase): |
| """Bidirectional Forwarding Detection (BFD) - API""" |
| |
| pg0 = None |
| pg1 = None |
| |
| @classmethod |
| def setUpClass(cls): |
| super(BFDAPITestCase, cls).setUpClass() |
| cls.vapi.cli("set log class bfd level debug") |
| try: |
| cls.create_pg_interfaces(range(2)) |
| for i in cls.pg_interfaces: |
| i.config_ip4() |
| i.config_ip6() |
| i.resolve_arp() |
| |
| except Exception: |
| super(BFDAPITestCase, cls).tearDownClass() |
| raise |
| |
| @classmethod |
| def tearDownClass(cls): |
| super(BFDAPITestCase, cls).tearDownClass() |
| |
| def setUp(self): |
| super(BFDAPITestCase, self).setUp() |
| self.factory = AuthKeyFactory() |
| |
| def test_add_bfd(self): |
| """ create a BFD session """ |
| session = VppBFDUDPSession(self, self.pg0, self.pg0.remote_ip4) |
| session.add_vpp_config() |
| self.logger.debug("Session state is %s", session.state) |
| session.remove_vpp_config() |
| session.add_vpp_config() |
| self.logger.debug("Session state is %s", session.state) |
| session.remove_vpp_config() |
| |
| def test_double_add(self): |
| """ create the same BFD session twice (negative case) """ |
| session = VppBFDUDPSession(self, self.pg0, self.pg0.remote_ip4) |
| session.add_vpp_config() |
| |
| with self.vapi.assert_negative_api_retval(): |
| session.add_vpp_config() |
| |
| session.remove_vpp_config() |
| |
| def test_add_bfd6(self): |
| """ create IPv6 BFD session """ |
| session = VppBFDUDPSession( |
| self, self.pg0, self.pg0.remote_ip6, af=AF_INET6) |
| session.add_vpp_config() |
| self.logger.debug("Session state is %s", session.state) |
| session.remove_vpp_config() |
| session.add_vpp_config() |
| self.logger.debug("Session state is %s", session.state) |
| session.remove_vpp_config() |
| |
| def test_mod_bfd(self): |
| """ modify BFD session parameters """ |
| session = VppBFDUDPSession(self, self.pg0, self.pg0.remote_ip4, |
| desired_min_tx=50000, |
| required_min_rx=10000, |
| detect_mult=1) |
| session.add_vpp_config() |
| s = session.get_bfd_udp_session_dump_entry() |
| self.assert_equal(session.desired_min_tx, |
| s.desired_min_tx, |
| "desired min transmit interval") |
| self.assert_equal(session.required_min_rx, |
| s.required_min_rx, |
| "required min receive interval") |
| self.assert_equal(session.detect_mult, s.detect_mult, "detect mult") |
| session.modify_parameters(desired_min_tx=session.desired_min_tx * 2, |
| required_min_rx=session.required_min_rx * 2, |
| detect_mult=session.detect_mult * 2) |
| s = session.get_bfd_udp_session_dump_entry() |
| self.assert_equal(session.desired_min_tx, |
| s.desired_min_tx, |
| "desired min transmit interval") |
| self.assert_equal(session.required_min_rx, |
| s.required_min_rx, |
| "required min receive interval") |
| self.assert_equal(session.detect_mult, s.detect_mult, "detect mult") |
| |
| def test_add_sha1_keys(self): |
| """ add SHA1 keys """ |
| key_count = 10 |
| keys = [self.factory.create_random_key( |
| self) for i in range(0, key_count)] |
| for key in keys: |
| self.assertFalse(key.query_vpp_config()) |
| for key in keys: |
| key.add_vpp_config() |
| for key in keys: |
| self.assertTrue(key.query_vpp_config()) |
| # remove randomly |
| indexes = list(range(key_count)) |
| shuffle(indexes) |
| removed = [] |
| for i in indexes: |
| key = keys[i] |
| key.remove_vpp_config() |
| removed.append(i) |
| for j in range(key_count): |
| key = keys[j] |
| if j in removed: |
| self.assertFalse(key.query_vpp_config()) |
| else: |
| self.assertTrue(key.query_vpp_config()) |
| # should be removed now |
| for key in keys: |
| self.assertFalse(key.query_vpp_config()) |
| # add back and remove again |
| for key in keys: |
| key.add_vpp_config() |
| for key in keys: |
| self.assertTrue(key.query_vpp_config()) |
| for key in keys: |
| key.remove_vpp_config() |
| for key in keys: |
| self.assertFalse(key.query_vpp_config()) |
| |
| def test_add_bfd_sha1(self): |
| """ create a BFD session (SHA1) """ |
| key = self.factory.create_random_key(self) |
| key.add_vpp_config() |
| session = VppBFDUDPSession(self, self.pg0, self.pg0.remote_ip4, |
| sha1_key=key) |
| session.add_vpp_config() |
| self.logger.debug("Session state is %s", session.state) |
| session.remove_vpp_config() |
| session.add_vpp_config() |
| self.logger.debug("Session state is %s", session.state) |
| session.remove_vpp_config() |
| |
| def test_double_add_sha1(self): |
| """ create the same BFD session twice (negative case) (SHA1) """ |
| key = self.factory.create_random_key(self) |
| key.add_vpp_config() |
| session = VppBFDUDPSession(self, self.pg0, self.pg0.remote_ip4, |
| sha1_key=key) |
| session.add_vpp_config() |
| with self.assertRaises(Exception): |
| session.add_vpp_config() |
| |
| def test_add_auth_nonexistent_key(self): |
| """ create BFD session using non-existent SHA1 (negative case) """ |
| session = VppBFDUDPSession( |
| self, self.pg0, self.pg0.remote_ip4, |
| sha1_key=self.factory.create_random_key(self)) |
| with self.assertRaises(Exception): |
| session.add_vpp_config() |
| |
| def test_shared_sha1_key(self): |
| """ share single SHA1 key between multiple BFD sessions """ |
| key = self.factory.create_random_key(self) |
| key.add_vpp_config() |
| sessions = [ |
| VppBFDUDPSession(self, self.pg0, self.pg0.remote_ip4, |
| sha1_key=key), |
| VppBFDUDPSession(self, self.pg0, self.pg0.remote_ip6, |
| sha1_key=key, af=AF_INET6), |
| VppBFDUDPSession(self, self.pg1, self.pg1.remote_ip4, |
| sha1_key=key), |
| VppBFDUDPSession(self, self.pg1, self.pg1.remote_ip6, |
| sha1_key=key, af=AF_INET6)] |
| for s in sessions: |
| s.add_vpp_config() |
| removed = 0 |
| for s in sessions: |
| e = key.get_bfd_auth_keys_dump_entry() |
| self.assert_equal(e.use_count, len(sessions) - removed, |
| "Use count for shared key") |
| s.remove_vpp_config() |
| removed += 1 |
| e = key.get_bfd_auth_keys_dump_entry() |
| self.assert_equal(e.use_count, len(sessions) - removed, |
| "Use count for shared key") |
| |
| def test_activate_auth(self): |
| """ activate SHA1 authentication """ |
| key = self.factory.create_random_key(self) |
| key.add_vpp_config() |
| session = VppBFDUDPSession(self, self.pg0, self.pg0.remote_ip4) |
| session.add_vpp_config() |
| session.activate_auth(key) |
| |
| def test_deactivate_auth(self): |
| """ deactivate SHA1 authentication """ |
| key = self.factory.create_random_key(self) |
| key.add_vpp_config() |
| session = VppBFDUDPSession(self, self.pg0, self.pg0.remote_ip4) |
| session.add_vpp_config() |
| session.activate_auth(key) |
| session.deactivate_auth() |
| |
| def test_change_key(self): |
| """ change SHA1 key """ |
| key1 = self.factory.create_random_key(self) |
| key2 = self.factory.create_random_key(self) |
| while key2.conf_key_id == key1.conf_key_id: |
| key2 = self.factory.create_random_key(self) |
| key1.add_vpp_config() |
| key2.add_vpp_config() |
| session = VppBFDUDPSession(self, self.pg0, self.pg0.remote_ip4, |
| sha1_key=key1) |
| session.add_vpp_config() |
| session.activate_auth(key2) |
| |
| def test_set_del_udp_echo_source(self): |
| """ set/del udp echo source """ |
| self.create_loopback_interfaces(1) |
| self.loopback0 = self.lo_interfaces[0] |
| self.loopback0.admin_up() |
| echo_source = self.vapi.bfd_udp_get_echo_source() |
| self.assertFalse(echo_source.is_set) |
| self.assertFalse(echo_source.have_usable_ip4) |
| self.assertFalse(echo_source.have_usable_ip6) |
| |
| self.vapi.bfd_udp_set_echo_source( |
| sw_if_index=self.loopback0.sw_if_index) |
| echo_source = self.vapi.bfd_udp_get_echo_source() |
| self.assertTrue(echo_source.is_set) |
| self.assertEqual(echo_source.sw_if_index, self.loopback0.sw_if_index) |
| self.assertFalse(echo_source.have_usable_ip4) |
| self.assertFalse(echo_source.have_usable_ip6) |
| |
| self.loopback0.config_ip4() |
| echo_ip4 = ipaddress.IPv4Address(int(ipaddress.IPv4Address( |
| self.loopback0.local_ip4)) ^ 1).packed |
| echo_source = self.vapi.bfd_udp_get_echo_source() |
| self.assertTrue(echo_source.is_set) |
| self.assertEqual(echo_source.sw_if_index, self.loopback0.sw_if_index) |
| self.assertTrue(echo_source.have_usable_ip4) |
| self.assertEqual(echo_source.ip4_addr.packed, echo_ip4) |
| self.assertFalse(echo_source.have_usable_ip6) |
| |
| self.loopback0.config_ip6() |
| echo_ip6 = ipaddress.IPv6Address(int(ipaddress.IPv6Address( |
| self.loopback0.local_ip6)) ^ 1).packed |
| |
| echo_source = self.vapi.bfd_udp_get_echo_source() |
| self.assertTrue(echo_source.is_set) |
| self.assertEqual(echo_source.sw_if_index, self.loopback0.sw_if_index) |
| self.assertTrue(echo_source.have_usable_ip4) |
| self.assertEqual(echo_source.ip4_addr.packed, echo_ip4) |
| self.assertTrue(echo_source.have_usable_ip6) |
| self.assertEqual(echo_source.ip6_addr.packed, echo_ip6) |
| |
| self.vapi.bfd_udp_del_echo_source() |
| echo_source = self.vapi.bfd_udp_get_echo_source() |
| self.assertFalse(echo_source.is_set) |
| self.assertFalse(echo_source.have_usable_ip4) |
| self.assertFalse(echo_source.have_usable_ip6) |
| |
| |
| class BFDTestSession(object): |
| """ BFD session as seen from test framework side """ |
| |
| def __init__(self, test, interface, af, detect_mult=3, sha1_key=None, |
| bfd_key_id=None, our_seq_number=None, |
| tunnel_header=None, phy_interface=None): |
| self.test = test |
| self.af = af |
| self.sha1_key = sha1_key |
| self.bfd_key_id = bfd_key_id |
| self.interface = interface |
| if phy_interface: |
| self.phy_interface = phy_interface |
| else: |
| self.phy_interface = self.interface |
| self.udp_sport = randint(49152, 65535) |
| if our_seq_number is None: |
| self.our_seq_number = randint(0, 40000000) |
| else: |
| self.our_seq_number = our_seq_number |
| self.vpp_seq_number = None |
| self.my_discriminator = 0 |
| self.desired_min_tx = 300000 |
| self.required_min_rx = 300000 |
| self.required_min_echo_rx = None |
| self.detect_mult = detect_mult |
| self.diag = BFDDiagCode.no_diagnostic |
| self.your_discriminator = None |
| self.state = BFDState.down |
| self.auth_type = BFDAuthType.no_auth |
| self.tunnel_header = tunnel_header |
| |
| def inc_seq_num(self): |
| """ increment sequence number, wrapping if needed """ |
| if self.our_seq_number == 0xFFFFFFFF: |
| self.our_seq_number = 0 |
| else: |
| self.our_seq_number += 1 |
| |
| def update(self, my_discriminator=None, your_discriminator=None, |
| desired_min_tx=None, required_min_rx=None, |
| required_min_echo_rx=None, detect_mult=None, |
| diag=None, state=None, auth_type=None): |
| """ update BFD parameters associated with session """ |
| if my_discriminator is not None: |
| self.my_discriminator = my_discriminator |
| if your_discriminator is not None: |
| self.your_discriminator = your_discriminator |
| if required_min_rx is not None: |
| self.required_min_rx = required_min_rx |
| if required_min_echo_rx is not None: |
| self.required_min_echo_rx = required_min_echo_rx |
| if desired_min_tx is not None: |
| self.desired_min_tx = desired_min_tx |
| if detect_mult is not None: |
| self.detect_mult = detect_mult |
| if diag is not None: |
| self.diag = diag |
| if state is not None: |
| self.state = state |
| if auth_type is not None: |
| self.auth_type = auth_type |
| |
| def fill_packet_fields(self, packet): |
| """ set packet fields with known values in packet """ |
| bfd = packet[BFD] |
| if self.my_discriminator: |
| self.test.logger.debug("BFD: setting packet.my_discriminator=%s", |
| self.my_discriminator) |
| bfd.my_discriminator = self.my_discriminator |
| if self.your_discriminator: |
| self.test.logger.debug("BFD: setting packet.your_discriminator=%s", |
| self.your_discriminator) |
| bfd.your_discriminator = self.your_discriminator |
| if self.required_min_rx: |
| self.test.logger.debug( |
| "BFD: setting packet.required_min_rx_interval=%s", |
| self.required_min_rx) |
| bfd.required_min_rx_interval = self.required_min_rx |
| if self.required_min_echo_rx: |
| self.test.logger.debug( |
| "BFD: setting packet.required_min_echo_rx=%s", |
| self.required_min_echo_rx) |
| bfd.required_min_echo_rx_interval = self.required_min_echo_rx |
| if self.desired_min_tx: |
| self.test.logger.debug( |
| "BFD: setting packet.desired_min_tx_interval=%s", |
| self.desired_min_tx) |
| bfd.desired_min_tx_interval = self.desired_min_tx |
| if self.detect_mult: |
| self.test.logger.debug( |
| "BFD: setting packet.detect_mult=%s", self.detect_mult) |
| bfd.detect_mult = self.detect_mult |
| if self.diag: |
| self.test.logger.debug("BFD: setting packet.diag=%s", self.diag) |
| bfd.diag = self.diag |
| if self.state: |
| self.test.logger.debug("BFD: setting packet.state=%s", self.state) |
| bfd.state = self.state |
| if self.auth_type: |
| # this is used by a negative test-case |
| self.test.logger.debug("BFD: setting packet.auth_type=%s", |
| self.auth_type) |
| bfd.auth_type = self.auth_type |
| |
| def create_packet(self): |
| """ create a BFD packet, reflecting the current state of session """ |
| if self.sha1_key: |
| bfd = BFD(flags="A") |
| bfd.auth_type = self.sha1_key.auth_type |
| bfd.auth_len = BFD.sha1_auth_len |
| bfd.auth_key_id = self.bfd_key_id |
| bfd.auth_seq_num = self.our_seq_number |
| bfd.length = BFD.sha1_auth_len + BFD.bfd_pkt_len |
| else: |
| bfd = BFD() |
| packet = Ether(src=self.phy_interface.remote_mac, |
| dst=self.phy_interface.local_mac) |
| if self.tunnel_header: |
| packet = packet / self.tunnel_header |
| if self.af == AF_INET6: |
| packet = (packet / |
| IPv6(src=self.interface.remote_ip6, |
| dst=self.interface.local_ip6, |
| hlim=255) / |
| UDP(sport=self.udp_sport, dport=BFD.udp_dport) / |
| bfd) |
| else: |
| packet = (packet / |
| IP(src=self.interface.remote_ip4, |
| dst=self.interface.local_ip4, |
| ttl=255) / |
| UDP(sport=self.udp_sport, dport=BFD.udp_dport) / |
| bfd) |
| self.test.logger.debug("BFD: Creating packet") |
| self.fill_packet_fields(packet) |
| if self.sha1_key: |
| hash_material = scapy.compat.raw( |
| packet[BFD])[:32] + self.sha1_key.key + \ |
| b"\0" * (20 - len(self.sha1_key.key)) |
| self.test.logger.debug("BFD: Calculated SHA1 hash: %s" % |
| hashlib.sha1(hash_material).hexdigest()) |
| packet[BFD].auth_key_hash = hashlib.sha1(hash_material).digest() |
| return packet |
| |
| def send_packet(self, packet=None, interface=None): |
| """ send packet on interface, creating the packet if needed """ |
| if packet is None: |
| packet = self.create_packet() |
| if interface is None: |
| interface = self.phy_interface |
| self.test.logger.debug(ppp("Sending packet:", packet)) |
| interface.add_stream(packet) |
| self.test.pg_start() |
| |
| def verify_sha1_auth(self, packet): |
| """ Verify correctness of authentication in BFD layer. """ |
| bfd = packet[BFD] |
| self.test.assert_equal(bfd.auth_len, 28, "Auth section length") |
| self.test.assert_equal(bfd.auth_type, self.sha1_key.auth_type, |
| BFDAuthType) |
| self.test.assert_equal(bfd.auth_key_id, self.bfd_key_id, "Key ID") |
| self.test.assert_equal(bfd.auth_reserved, 0, "Reserved") |
| if self.vpp_seq_number is None: |
| self.vpp_seq_number = bfd.auth_seq_num |
| self.test.logger.debug("Received initial sequence number: %s" % |
| self.vpp_seq_number) |
| else: |
| recvd_seq_num = bfd.auth_seq_num |
| self.test.logger.debug("Received followup sequence number: %s" % |
| recvd_seq_num) |
| if self.vpp_seq_number < 0xffffffff: |
| if self.sha1_key.auth_type == \ |
| BFDAuthType.meticulous_keyed_sha1: |
| self.test.assert_equal(recvd_seq_num, |
| self.vpp_seq_number + 1, |
| "BFD sequence number") |
| else: |
| self.test.assert_in_range(recvd_seq_num, |
| self.vpp_seq_number, |
| self.vpp_seq_number + 1, |
| "BFD sequence number") |
| else: |
| if self.sha1_key.auth_type == \ |
| BFDAuthType.meticulous_keyed_sha1: |
| self.test.assert_equal(recvd_seq_num, 0, |
| "BFD sequence number") |
| else: |
| self.test.assertIn(recvd_seq_num, (self.vpp_seq_number, 0), |
| "BFD sequence number not one of " |
| "(%s, 0)" % self.vpp_seq_number) |
| self.vpp_seq_number = recvd_seq_num |
| # last 20 bytes represent the hash - so replace them with the key, |
| # pad the result with zeros and hash the result |
| hash_material = bfd.original[:-20] + self.sha1_key.key + \ |
| b"\0" * (20 - len(self.sha1_key.key)) |
| expected_hash = hashlib.sha1(hash_material).hexdigest() |
| self.test.assert_equal(binascii.hexlify(bfd.auth_key_hash), |
| expected_hash.encode(), "Auth key hash") |
| |
| def verify_bfd(self, packet): |
| """ Verify correctness of BFD layer. """ |
| bfd = packet[BFD] |
| self.test.assert_equal(bfd.version, 1, "BFD version") |
| self.test.assert_equal(bfd.your_discriminator, |
| self.my_discriminator, |
| "BFD - your discriminator") |
| if self.sha1_key: |
| self.verify_sha1_auth(packet) |
| |
| |
| def bfd_session_up(test): |
| """ Bring BFD session up """ |
| test.logger.info("BFD: Waiting for slow hello") |
| p = wait_for_bfd_packet(test, 2, is_tunnel=test.vpp_session.is_tunnel) |
| old_offset = None |
| if hasattr(test, 'vpp_clock_offset'): |
| old_offset = test.vpp_clock_offset |
| test.vpp_clock_offset = time.time() - float(p.time) |
| test.logger.debug("BFD: Calculated vpp clock offset: %s", |
| test.vpp_clock_offset) |
| if old_offset: |
| test.assertAlmostEqual( |
| old_offset, test.vpp_clock_offset, delta=0.5, |
| msg="vpp clock offset not stable (new: %s, old: %s)" % |
| (test.vpp_clock_offset, old_offset)) |
| test.logger.info("BFD: Sending Init") |
| test.test_session.update(my_discriminator=randint(0, 40000000), |
| your_discriminator=p[BFD].my_discriminator, |
| state=BFDState.init) |
| if test.test_session.sha1_key and test.test_session.sha1_key.auth_type == \ |
| BFDAuthType.meticulous_keyed_sha1: |
| test.test_session.inc_seq_num() |
| test.test_session.send_packet() |
| test.logger.info("BFD: Waiting for event") |
| e = test.vapi.wait_for_event(1, "bfd_udp_session_details") |
| verify_event(test, e, expected_state=BFDState.up) |
| test.logger.info("BFD: Session is Up") |
| test.test_session.update(state=BFDState.up) |
| if test.test_session.sha1_key and test.test_session.sha1_key.auth_type == \ |
| BFDAuthType.meticulous_keyed_sha1: |
| test.test_session.inc_seq_num() |
| test.test_session.send_packet() |
| test.assert_equal(test.vpp_session.state, BFDState.up, BFDState) |
| |
| |
| def bfd_session_down(test): |
| """ Bring BFD session down """ |
| test.assert_equal(test.vpp_session.state, BFDState.up, BFDState) |
| test.test_session.update(state=BFDState.down) |
| if test.test_session.sha1_key and test.test_session.sha1_key.auth_type == \ |
| BFDAuthType.meticulous_keyed_sha1: |
| test.test_session.inc_seq_num() |
| test.test_session.send_packet() |
| test.logger.info("BFD: Waiting for event") |
| e = test.vapi.wait_for_event(1, "bfd_udp_session_details") |
| verify_event(test, e, expected_state=BFDState.down) |
| test.logger.info("BFD: Session is Down") |
| test.assert_equal(test.vpp_session.state, BFDState.down, BFDState) |
| |
| |
| def verify_bfd_session_config(test, session, state=None): |
| dump = session.get_bfd_udp_session_dump_entry() |
| test.assertIsNotNone(dump) |
| # since dump is not none, we have verified that sw_if_index and addresses |
| # are valid (in get_bfd_udp_session_dump_entry) |
| if state: |
| test.assert_equal(dump.state, state, "session state") |
| test.assert_equal(dump.required_min_rx, session.required_min_rx, |
| "required min rx interval") |
| test.assert_equal(dump.desired_min_tx, session.desired_min_tx, |
| "desired min tx interval") |
| test.assert_equal(dump.detect_mult, session.detect_mult, |
| "detect multiplier") |
| if session.sha1_key is None: |
| test.assert_equal(dump.is_authenticated, 0, "is_authenticated flag") |
| else: |
| test.assert_equal(dump.is_authenticated, 1, "is_authenticated flag") |
| test.assert_equal(dump.bfd_key_id, session.bfd_key_id, |
| "bfd key id") |
| test.assert_equal(dump.conf_key_id, |
| session.sha1_key.conf_key_id, |
| "config key id") |
| |
| |
| def verify_ip(test, packet): |
| """ Verify correctness of IP layer. """ |
| if test.vpp_session.af == AF_INET6: |
| ip = packet[IPv6] |
| local_ip = test.vpp_session.interface.local_ip6 |
| remote_ip = test.vpp_session.interface.remote_ip6 |
| test.assert_equal(ip.hlim, 255, "IPv6 hop limit") |
| else: |
| ip = packet[IP] |
| local_ip = test.vpp_session.interface.local_ip4 |
| remote_ip = test.vpp_session.interface.remote_ip4 |
| test.assert_equal(ip.ttl, 255, "IPv4 TTL") |
| test.assert_equal(ip.src, local_ip, "IP source address") |
| test.assert_equal(ip.dst, remote_ip, "IP destination address") |
| |
| |
| def verify_udp(test, packet): |
| """ Verify correctness of UDP layer. """ |
| udp = packet[UDP] |
| test.assert_equal(udp.dport, BFD.udp_dport, "UDP destination port") |
| test.assert_in_range(udp.sport, BFD.udp_sport_min, BFD.udp_sport_max, |
| "UDP source port") |
| |
| |
| def verify_event(test, event, expected_state): |
| """ Verify correctness of event values. """ |
| e = event |
| test.logger.debug("BFD: Event: %s" % reprlib.repr(e)) |
| test.assert_equal(e.sw_if_index, |
| test.vpp_session.interface.sw_if_index, |
| "BFD interface index") |
| |
| test.assert_equal(str(e.local_addr), test.vpp_session.local_addr, |
| "Local IPv6 address") |
| test.assert_equal(str(e.peer_addr), test.vpp_session.peer_addr, |
| "Peer IPv6 address") |
| test.assert_equal(e.state, expected_state, BFDState) |
| |
| |
| def wait_for_bfd_packet(test, timeout=1, pcap_time_min=None, is_tunnel=False): |
| """ wait for BFD packet and verify its correctness |
| |
| :param timeout: how long to wait |
| :param pcap_time_min: ignore packets with pcap timestamp lower than this |
| |
| :returns: tuple (packet, time spent waiting for packet) |
| """ |
| test.logger.info("BFD: Waiting for BFD packet") |
| deadline = time.time() + timeout |
| counter = 0 |
| while True: |
| counter += 1 |
| # sanity check |
| test.assert_in_range(counter, 0, 100, "number of packets ignored") |
| time_left = deadline - time.time() |
| if time_left < 0: |
| raise CaptureTimeoutError("Packet did not arrive within timeout") |
| p = test.pg0.wait_for_packet(timeout=time_left) |
| test.logger.debug(ppp("BFD: Got packet:", p)) |
| if pcap_time_min is not None and p.time < pcap_time_min: |
| test.logger.debug(ppp("BFD: ignoring packet (pcap time %s < " |
| "pcap time min %s):" % |
| (p.time, pcap_time_min), p)) |
| else: |
| break |
| if is_tunnel: |
| # strip an IP layer and move to the next |
| p = p[IP].payload |
| |
| bfd = p[BFD] |
| if bfd is None: |
| raise Exception(ppp("Unexpected or invalid BFD packet:", p)) |
| if bfd.payload: |
| raise Exception(ppp("Unexpected payload in BFD packet:", bfd)) |
| verify_ip(test, p) |
| verify_udp(test, p) |
| test.test_session.verify_bfd(p) |
| return p |
| |
| |
| @tag_run_solo |
| class BFD4TestCase(VppTestCase): |
| """Bidirectional Forwarding Detection (BFD)""" |
| |
| pg0 = None |
| vpp_clock_offset = None |
| vpp_session = None |
| test_session = None |
| |
| @classmethod |
| def setUpClass(cls): |
| super(BFD4TestCase, cls).setUpClass() |
| cls.vapi.cli("set log class bfd level debug") |
| try: |
| cls.create_pg_interfaces([0]) |
| cls.create_loopback_interfaces(1) |
| cls.loopback0 = cls.lo_interfaces[0] |
| cls.loopback0.config_ip4() |
| cls.loopback0.admin_up() |
| cls.pg0.config_ip4() |
| cls.pg0.configure_ipv4_neighbors() |
| cls.pg0.admin_up() |
| cls.pg0.resolve_arp() |
| |
| except Exception: |
| super(BFD4TestCase, cls).tearDownClass() |
| raise |
| |
| @classmethod |
| def tearDownClass(cls): |
| super(BFD4TestCase, cls).tearDownClass() |
| |
| def setUp(self): |
| super(BFD4TestCase, self).setUp() |
| self.factory = AuthKeyFactory() |
| self.vapi.want_bfd_events() |
| self.pg0.enable_capture() |
| try: |
| self.vpp_session = VppBFDUDPSession(self, self.pg0, |
| self.pg0.remote_ip4) |
| self.vpp_session.add_vpp_config() |
| self.vpp_session.admin_up() |
| self.test_session = BFDTestSession(self, self.pg0, AF_INET) |
| except BaseException: |
| self.vapi.want_bfd_events(enable_disable=0) |
| raise |
| |
| def tearDown(self): |
| if not self.vpp_dead: |
| self.vapi.want_bfd_events(enable_disable=0) |
| self.vapi.collect_events() # clear the event queue |
| super(BFD4TestCase, self).tearDown() |
| |
| def test_session_up(self): |
| """ bring BFD session up """ |
| bfd_session_up(self) |
| |
| def test_session_up_by_ip(self): |
| """ bring BFD session up - first frame looked up by address pair """ |
| self.logger.info("BFD: Sending Slow control frame") |
| self.test_session.update(my_discriminator=randint(0, 40000000)) |
| self.test_session.send_packet() |
| self.pg0.enable_capture() |
| p = self.pg0.wait_for_packet(1) |
| self.assert_equal(p[BFD].your_discriminator, |
| self.test_session.my_discriminator, |
| "BFD - your discriminator") |
| self.assert_equal(p[BFD].state, BFDState.init, BFDState) |
| self.test_session.update(your_discriminator=p[BFD].my_discriminator, |
| state=BFDState.up) |
| self.logger.info("BFD: Waiting for event") |
| e = self.vapi.wait_for_event(1, "bfd_udp_session_details") |
| verify_event(self, e, expected_state=BFDState.init) |
| self.logger.info("BFD: Sending Up") |
| self.test_session.send_packet() |
| self.logger.info("BFD: Waiting for event") |
| e = self.vapi.wait_for_event(1, "bfd_udp_session_details") |
| verify_event(self, e, expected_state=BFDState.up) |
| self.logger.info("BFD: Session is Up") |
| self.test_session.update(state=BFDState.up) |
| self.test_session.send_packet() |
| self.assert_equal(self.vpp_session.state, BFDState.up, BFDState) |
| |
| def test_session_down(self): |
| """ bring BFD session down """ |
| bfd_session_up(self) |
| bfd_session_down(self) |
| |
| def test_hold_up(self): |
| """ hold BFD session up """ |
| bfd_session_up(self) |
| for dummy in range(self.test_session.detect_mult * 2): |
| wait_for_bfd_packet(self) |
| self.test_session.send_packet() |
| self.assert_equal(len(self.vapi.collect_events()), 0, |
| "number of bfd events") |
| |
| def test_slow_timer(self): |
| """ verify slow periodic control frames while session down """ |
| packet_count = 3 |
| self.logger.info("BFD: Waiting for %d BFD packets", packet_count) |
| prev_packet = wait_for_bfd_packet(self, 2) |
| for dummy in range(packet_count): |
| next_packet = wait_for_bfd_packet(self, 2) |
| time_diff = next_packet.time - prev_packet.time |
| # spec says the range should be <0.75, 1>, allow extra 0.05 margin |
| # to work around timing issues |
| self.assert_in_range( |
| time_diff, 0.70, 1.05, "time between slow packets") |
| prev_packet = next_packet |
| |
| def test_zero_remote_min_rx(self): |
| """ no packets when zero remote required min rx interval """ |
| bfd_session_up(self) |
| self.test_session.update(required_min_rx=0) |
| self.test_session.send_packet() |
| for dummy in range(self.test_session.detect_mult): |
| self.sleep(self.vpp_session.required_min_rx / USEC_IN_SEC, |
| "sleep before transmitting bfd packet") |
| self.test_session.send_packet() |
| try: |
| p = wait_for_bfd_packet(self, timeout=0) |
| self.logger.error(ppp("Received unexpected packet:", p)) |
| except CaptureTimeoutError: |
| pass |
| self.assert_equal( |
| len(self.vapi.collect_events()), 0, "number of bfd events") |
| self.test_session.update(required_min_rx=300000) |
| for dummy in range(3): |
| self.test_session.send_packet() |
| wait_for_bfd_packet( |
| self, timeout=self.test_session.required_min_rx / USEC_IN_SEC) |
| self.assert_equal( |
| len(self.vapi.collect_events()), 0, "number of bfd events") |
| |
| def test_conn_down(self): |
| """ verify session goes down after inactivity """ |
| bfd_session_up(self) |
| detection_time = self.test_session.detect_mult *\ |
| self.vpp_session.required_min_rx / USEC_IN_SEC |
| self.sleep(detection_time, "waiting for BFD session time-out") |
| e = self.vapi.wait_for_event(1, "bfd_udp_session_details") |
| verify_event(self, e, expected_state=BFDState.down) |
| |
| def test_peer_discr_reset_sess_down(self): |
| """ peer discriminator reset after session goes down """ |
| bfd_session_up(self) |
| detection_time = self.test_session.detect_mult *\ |
| self.vpp_session.required_min_rx / USEC_IN_SEC |
| self.sleep(detection_time, "waiting for BFD session time-out") |
| self.test_session.my_discriminator = 0 |
| wait_for_bfd_packet(self, |
| pcap_time_min=time.time() - self.vpp_clock_offset) |
| |
| def test_large_required_min_rx(self): |
| """ large remote required min rx interval """ |
| bfd_session_up(self) |
| p = wait_for_bfd_packet(self) |
| interval = 3000000 |
| self.test_session.update(required_min_rx=interval) |
| self.test_session.send_packet() |
| time_mark = time.time() |
| count = 0 |
| # busy wait here, trying to collect a packet or event, vpp is not |
| # allowed to send packets and the session will timeout first - so the |
| # Up->Down event must arrive before any packets do |
| while time.time() < time_mark + interval / USEC_IN_SEC: |
| try: |
| p = wait_for_bfd_packet(self, timeout=0) |
| # if vpp managed to send a packet before we did the session |
| # session update, then that's fine, ignore it |
| if p.time < time_mark - self.vpp_clock_offset: |
| continue |
| self.logger.error(ppp("Received unexpected packet:", p)) |
| count += 1 |
| except CaptureTimeoutError: |
| pass |
| events = self.vapi.collect_events() |
| if len(events) > 0: |
| verify_event(self, events[0], BFDState.down) |
| break |
| self.assert_equal(count, 0, "number of packets received") |
| |
| def test_immediate_remote_min_rx_reduction(self): |
| """ immediately honor remote required min rx reduction """ |
| self.vpp_session.remove_vpp_config() |
| self.vpp_session = VppBFDUDPSession( |
| self, self.pg0, self.pg0.remote_ip4, desired_min_tx=10000) |
| self.pg0.enable_capture() |
| self.vpp_session.add_vpp_config() |
| self.test_session.update(desired_min_tx=1000000, |
| required_min_rx=1000000) |
| bfd_session_up(self) |
| reference_packet = wait_for_bfd_packet(self) |
| time_mark = time.time() |
| interval = 300000 |
| self.test_session.update(required_min_rx=interval) |
| self.test_session.send_packet() |
| extra_time = time.time() - time_mark |
| p = wait_for_bfd_packet(self) |
| # first packet is allowed to be late by time we spent doing the update |
| # calculated in extra_time |
| self.assert_in_range(p.time - reference_packet.time, |
| .95 * 0.75 * interval / USEC_IN_SEC, |
| 1.05 * interval / USEC_IN_SEC + extra_time, |
| "time between BFD packets") |
| reference_packet = p |
| for dummy in range(3): |
| p = wait_for_bfd_packet(self) |
| diff = p.time - reference_packet.time |
| self.assert_in_range(diff, .95 * .75 * interval / USEC_IN_SEC, |
| 1.05 * interval / USEC_IN_SEC, |
| "time between BFD packets") |
| reference_packet = p |
| |
| def test_modify_req_min_rx_double(self): |
| """ modify session - double required min rx """ |
| bfd_session_up(self) |
| p = wait_for_bfd_packet(self) |
| self.test_session.update(desired_min_tx=10000, |
| required_min_rx=10000) |
| self.test_session.send_packet() |
| # double required min rx |
| self.vpp_session.modify_parameters( |
| required_min_rx=2 * self.vpp_session.required_min_rx) |
| p = wait_for_bfd_packet( |
| self, pcap_time_min=time.time() - self.vpp_clock_offset) |
| # poll bit needs to be set |
| self.assertIn("P", p.sprintf("%BFD.flags%"), |
| "Poll bit not set in BFD packet") |
| # finish poll sequence with final packet |
| final = self.test_session.create_packet() |
| final[BFD].flags = "F" |
| timeout = self.test_session.detect_mult * \ |
| max(self.test_session.desired_min_tx, |
| self.vpp_session.required_min_rx) / USEC_IN_SEC |
| self.test_session.send_packet(final) |
| time_mark = time.time() |
| e = self.vapi.wait_for_event(2 * timeout, "bfd_udp_session_details") |
| verify_event(self, e, expected_state=BFDState.down) |
| time_to_event = time.time() - time_mark |
| self.assert_in_range(time_to_event, .9 * timeout, |
| 1.1 * timeout, "session timeout") |
| |
| def test_modify_req_min_rx_halve(self): |
| """ modify session - halve required min rx """ |
| self.vpp_session.modify_parameters( |
| required_min_rx=2 * self.vpp_session.required_min_rx) |
| bfd_session_up(self) |
| p = wait_for_bfd_packet(self) |
| self.test_session.update(desired_min_tx=10000, |
| required_min_rx=10000) |
| self.test_session.send_packet() |
| p = wait_for_bfd_packet( |
| self, pcap_time_min=time.time() - self.vpp_clock_offset) |
| # halve required min rx |
| old_required_min_rx = self.vpp_session.required_min_rx |
| self.vpp_session.modify_parameters( |
| required_min_rx=self.vpp_session.required_min_rx // 2) |
| # now we wait 0.8*3*old-req-min-rx and the session should still be up |
| self.sleep(0.8 * self.vpp_session.detect_mult * |
| old_required_min_rx / USEC_IN_SEC, |
| "wait before finishing poll sequence") |
| self.assert_equal(len(self.vapi.collect_events()), 0, |
| "number of bfd events") |
| p = wait_for_bfd_packet(self) |
| # poll bit needs to be set |
| self.assertIn("P", p.sprintf("%BFD.flags%"), |
| "Poll bit not set in BFD packet") |
| # finish poll sequence with final packet |
| final = self.test_session.create_packet() |
| final[BFD].flags = "F" |
| self.test_session.send_packet(final) |
| # now the session should time out under new conditions |
| detection_time = self.test_session.detect_mult *\ |
| self.vpp_session.required_min_rx / USEC_IN_SEC |
| before = time.time() |
| e = self.vapi.wait_for_event( |
| 2 * detection_time, "bfd_udp_session_details") |
| after = time.time() |
| self.assert_in_range(after - before, |
| 0.9 * detection_time, |
| 1.1 * detection_time, |
| "time before bfd session goes down") |
| verify_event(self, e, expected_state=BFDState.down) |
| |
| def test_modify_detect_mult(self): |
| """ modify detect multiplier """ |
| bfd_session_up(self) |
| p = wait_for_bfd_packet(self) |
| self.vpp_session.modify_parameters(detect_mult=1) |
| p = wait_for_bfd_packet( |
| self, pcap_time_min=time.time() - self.vpp_clock_offset) |
| self.assert_equal(self.vpp_session.detect_mult, |
| p[BFD].detect_mult, |
| "detect mult") |
| # poll bit must not be set |
| self.assertNotIn("P", p.sprintf("%BFD.flags%"), |
| "Poll bit not set in BFD packet") |
| self.vpp_session.modify_parameters(detect_mult=10) |
| p = wait_for_bfd_packet( |
| self, pcap_time_min=time.time() - self.vpp_clock_offset) |
| self.assert_equal(self.vpp_session.detect_mult, |
| p[BFD].detect_mult, |
| "detect mult") |
| # poll bit must not be set |
| self.assertNotIn("P", p.sprintf("%BFD.flags%"), |
| "Poll bit not set in BFD packet") |
| |
| def test_queued_poll(self): |
| """ test poll sequence queueing """ |
| bfd_session_up(self) |
| p = wait_for_bfd_packet(self) |
| self.vpp_session.modify_parameters( |
| required_min_rx=2 * self.vpp_session.required_min_rx) |
| p = wait_for_bfd_packet(self) |
| poll_sequence_start = time.time() |
| poll_sequence_length_min = 0.5 |
| send_final_after = time.time() + poll_sequence_length_min |
| # poll bit needs to be set |
| self.assertIn("P", p.sprintf("%BFD.flags%"), |
| "Poll bit not set in BFD packet") |
| self.assert_equal(p[BFD].required_min_rx_interval, |
| self.vpp_session.required_min_rx, |
| "BFD required min rx interval") |
| self.vpp_session.modify_parameters( |
| required_min_rx=2 * self.vpp_session.required_min_rx) |
| # 2nd poll sequence should be queued now |
| # don't send the reply back yet, wait for some time to emulate |
| # longer round-trip time |
| packet_count = 0 |
| while time.time() < send_final_after: |
| self.test_session.send_packet() |
| p = wait_for_bfd_packet(self) |
| self.assert_equal(len(self.vapi.collect_events()), 0, |
| "number of bfd events") |
| self.assert_equal(p[BFD].required_min_rx_interval, |
| self.vpp_session.required_min_rx, |
| "BFD required min rx interval") |
| packet_count += 1 |
| # poll bit must be set |
| self.assertIn("P", p.sprintf("%BFD.flags%"), |
| "Poll bit not set in BFD packet") |
| final = self.test_session.create_packet() |
| final[BFD].flags = "F" |
| self.test_session.send_packet(final) |
| # finish 1st with final |
| poll_sequence_length = time.time() - poll_sequence_start |
| # vpp must wait for some time before starting new poll sequence |
| poll_no_2_started = False |
| for dummy in range(2 * packet_count): |
| p = wait_for_bfd_packet(self) |
| self.assert_equal(len(self.vapi.collect_events()), 0, |
| "number of bfd events") |
| if "P" in p.sprintf("%BFD.flags%"): |
| poll_no_2_started = True |
| if time.time() < poll_sequence_start + poll_sequence_length: |
| raise Exception("VPP started 2nd poll sequence too soon") |
| final = self.test_session.create_packet() |
| final[BFD].flags = "F" |
| self.test_session.send_packet(final) |
| break |
| else: |
| self.test_session.send_packet() |
| self.assertTrue(poll_no_2_started, "2nd poll sequence not performed") |
| # finish 2nd with final |
| final = self.test_session.create_packet() |
| final[BFD].flags = "F" |
| self.test_session.send_packet(final) |
| p = wait_for_bfd_packet(self) |
| # poll bit must not be set |
| self.assertNotIn("P", p.sprintf("%BFD.flags%"), |
| "Poll bit set in BFD packet") |
| |
| # returning inconsistent results requiring retries in per-patch tests |
| @unittest.skipUnless(running_extended_tests, "part of extended tests") |
| def test_poll_response(self): |
| """ test correct response to control frame with poll bit set """ |
| bfd_session_up(self) |
| poll = self.test_session.create_packet() |
| poll[BFD].flags = "P" |
| self.test_session.send_packet(poll) |
| final = wait_for_bfd_packet( |
| self, pcap_time_min=time.time() - self.vpp_clock_offset) |
| self.assertIn("F", final.sprintf("%BFD.flags%")) |
| |
| def test_no_periodic_if_remote_demand(self): |
| """ no periodic frames outside poll sequence if remote demand set """ |
| bfd_session_up(self) |
| demand = self.test_session.create_packet() |
| demand[BFD].flags = "D" |
| self.test_session.send_packet(demand) |
| transmit_time = 0.9 \ |
| * max(self.vpp_session.required_min_rx, |
| self.test_session.desired_min_tx) \ |
| / USEC_IN_SEC |
| count = 0 |
| for dummy in range(self.test_session.detect_mult * 2): |
| self.sleep(transmit_time) |
| self.test_session.send_packet(demand) |
| try: |
| p = wait_for_bfd_packet(self, timeout=0) |
| self.logger.error(ppp("Received unexpected packet:", p)) |
| count += 1 |
| except CaptureTimeoutError: |
| pass |
| events = self.vapi.collect_events() |
| for e in events: |
| self.logger.error("Received unexpected event: %s", e) |
| self.assert_equal(count, 0, "number of packets received") |
| self.assert_equal(len(events), 0, "number of events received") |
| |
| def test_echo_looped_back(self): |
| """ echo packets looped back """ |
| # don't need a session in this case.. |
| self.vpp_session.remove_vpp_config() |
| self.pg0.enable_capture() |
| echo_packet_count = 10 |
| # random source port low enough to increment a few times.. |
| udp_sport_tx = randint(1, 50000) |
| udp_sport_rx = udp_sport_tx |
| echo_packet = (Ether(src=self.pg0.remote_mac, |
| dst=self.pg0.local_mac) / |
| IP(src=self.pg0.remote_ip4, |
| dst=self.pg0.remote_ip4) / |
| UDP(dport=BFD.udp_dport_echo) / |
| Raw("this should be looped back")) |
| for dummy in range(echo_packet_count): |
| self.sleep(.01, "delay between echo packets") |
| echo_packet[UDP].sport = udp_sport_tx |
| udp_sport_tx += 1 |
| self.logger.debug(ppp("Sending packet:", echo_packet)) |
| self.pg0.add_stream(echo_packet) |
| self.pg_start() |
| for dummy in range(echo_packet_count): |
| p = self.pg0.wait_for_packet(1) |
| self.logger.debug(ppp("Got packet:", p)) |
| ether = p[Ether] |
| self.assert_equal(self.pg0.remote_mac, |
| ether.dst, "Destination MAC") |
| self.assert_equal(self.pg0.local_mac, ether.src, "Source MAC") |
| ip = p[IP] |
| self.assert_equal(self.pg0.remote_ip4, ip.dst, "Destination IP") |
| self.assert_equal(self.pg0.remote_ip4, ip.src, "Destination IP") |
| udp = p[UDP] |
| self.assert_equal(udp.dport, BFD.udp_dport_echo, |
| "UDP destination port") |
| self.assert_equal(udp.sport, udp_sport_rx, "UDP source port") |
| udp_sport_rx += 1 |
| # need to compare the hex payload here, otherwise BFD_vpp_echo |
| # gets in way |
| self.assertEqual(scapy.compat.raw(p[UDP].payload), |
| scapy.compat.raw(echo_packet[UDP].payload), |
| "Received packet is not the echo packet sent") |
| self.assert_equal(udp_sport_tx, udp_sport_rx, "UDP source port (== " |
| "ECHO packet identifier for test purposes)") |
| |
| def test_echo(self): |
| """ echo function """ |
| bfd_session_up(self) |
| self.test_session.update(required_min_echo_rx=150000) |
| self.test_session.send_packet() |
| detection_time = self.test_session.detect_mult *\ |
| self.vpp_session.required_min_rx / USEC_IN_SEC |
| # echo shouldn't work without echo source set |
| for dummy in range(10): |
| sleep = self.vpp_session.required_min_rx / USEC_IN_SEC |
| self.sleep(sleep, "delay before sending bfd packet") |
| self.test_session.send_packet() |
| p = wait_for_bfd_packet( |
| self, pcap_time_min=time.time() - self.vpp_clock_offset) |
| self.assert_equal(p[BFD].required_min_rx_interval, |
| self.vpp_session.required_min_rx, |
| "BFD required min rx interval") |
| self.test_session.send_packet() |
| self.vapi.bfd_udp_set_echo_source( |
| sw_if_index=self.loopback0.sw_if_index) |
| echo_seen = False |
| # should be turned on - loopback echo packets |
| for dummy in range(3): |
| loop_until = time.time() + 0.75 * detection_time |
| while time.time() < loop_until: |
| p = self.pg0.wait_for_packet(1) |
| self.logger.debug(ppp("Got packet:", p)) |
| if p[UDP].dport == BFD.udp_dport_echo: |
| self.assert_equal( |
| p[IP].dst, self.pg0.local_ip4, "BFD ECHO dst IP") |
| self.assertNotEqual(p[IP].src, self.loopback0.local_ip4, |
| "BFD ECHO src IP equal to loopback IP") |
| self.logger.debug(ppp("Looping back packet:", p)) |
| self.assert_equal(p[Ether].dst, self.pg0.remote_mac, |
| "ECHO packet destination MAC address") |
| p[Ether].dst = self.pg0.local_mac |
| self.pg0.add_stream(p) |
| self.pg_start() |
| echo_seen = True |
| elif p.haslayer(BFD): |
| if echo_seen: |
| self.assertGreaterEqual( |
| p[BFD].required_min_rx_interval, |
| 1000000) |
| if "P" in p.sprintf("%BFD.flags%"): |
| final = self.test_session.create_packet() |
| final[BFD].flags = "F" |
| self.test_session.send_packet(final) |
| else: |
| raise Exception(ppp("Received unknown packet:", p)) |
| |
| self.assert_equal(len(self.vapi.collect_events()), 0, |
| "number of bfd events") |
| self.test_session.send_packet() |
| self.assertTrue(echo_seen, "No echo packets received") |
| |
| def test_echo_fail(self): |
| """ session goes down if echo function fails """ |
| bfd_session_up(self) |
| self.test_session.update(required_min_echo_rx=150000) |
| self.test_session.send_packet() |
| detection_time = self.test_session.detect_mult *\ |
| self.vpp_session.required_min_rx / USEC_IN_SEC |
| self.vapi.bfd_udp_set_echo_source( |
| sw_if_index=self.loopback0.sw_if_index) |
| # echo function should be used now, but we will drop the echo packets |
| verified_diag = False |
| for dummy in range(3): |
| loop_until = time.time() + 0.75 * detection_time |
| while time.time() < loop_until: |
| p = self.pg0.wait_for_packet(1) |
| self.logger.debug(ppp("Got packet:", p)) |
| if p[UDP].dport == BFD.udp_dport_echo: |
| # dropped |
| pass |
| elif p.haslayer(BFD): |
| if "P" in p.sprintf("%BFD.flags%"): |
| self.assertGreaterEqual( |
| p[BFD].required_min_rx_interval, |
| 1000000) |
| final = self.test_session.create_packet() |
| final[BFD].flags = "F" |
| self.test_session.send_packet(final) |
| if p[BFD].state == BFDState.down: |
| self.assert_equal(p[BFD].diag, |
| BFDDiagCode.echo_function_failed, |
| BFDDiagCode) |
| verified_diag = True |
| else: |
| raise Exception(ppp("Received unknown packet:", p)) |
| self.test_session.send_packet() |
| events = self.vapi.collect_events() |
| self.assert_equal(len(events), 1, "number of bfd events") |
| self.assert_equal(events[0].state, BFDState.down, BFDState) |
| self.assertTrue(verified_diag, "Incorrect diagnostics code received") |
| |
| def test_echo_stop(self): |
| """ echo function stops if peer sets required min echo rx zero """ |
| bfd_session_up(self) |
| self.test_session.update(required_min_echo_rx=150000) |
| self.test_session.send_packet() |
| self.vapi.bfd_udp_set_echo_source( |
| sw_if_index=self.loopback0.sw_if_index) |
| # wait for first echo packet |
| while True: |
| p = self.pg0.wait_for_packet(1) |
| self.logger.debug(ppp("Got packet:", p)) |
| if p[UDP].dport == BFD.udp_dport_echo: |
| self.logger.debug(ppp("Looping back packet:", p)) |
| p[Ether].dst = self.pg0.local_mac |
| self.pg0.add_stream(p) |
| self.pg_start() |
| break |
| elif p.haslayer(BFD): |
| # ignore BFD |
| pass |
| else: |
| raise Exception(ppp("Received unknown packet:", p)) |
| self.test_session.update(required_min_echo_rx=0) |
| self.test_session.send_packet() |
| # echo packets shouldn't arrive anymore |
| for dummy in range(5): |
| wait_for_bfd_packet( |
| self, pcap_time_min=time.time() - self.vpp_clock_offset) |
| self.test_session.send_packet() |
| events = self.vapi.collect_events() |
| self.assert_equal(len(events), 0, "number of bfd events") |
| |
| def test_echo_source_removed(self): |
| """ echo function stops if echo source is removed """ |
| bfd_session_up(self) |
| self.test_session.update(required_min_echo_rx=150000) |
| self.test_session.send_packet() |
| self.vapi.bfd_udp_set_echo_source( |
| sw_if_index=self.loopback0.sw_if_index) |
| # wait for first echo packet |
| while True: |
| p = self.pg0.wait_for_packet(1) |
| self.logger.debug(ppp("Got packet:", p)) |
| if p[UDP].dport == BFD.udp_dport_echo: |
| self.logger.debug(ppp("Looping back packet:", p)) |
| p[Ether].dst = self.pg0.local_mac |
| self.pg0.add_stream(p) |
| self.pg_start() |
| break |
| elif p.haslayer(BFD): |
| # ignore BFD |
| pass |
| else: |
| raise Exception(ppp("Received unknown packet:", p)) |
| self.vapi.bfd_udp_del_echo_source() |
| self.test_session.send_packet() |
| # echo packets shouldn't arrive anymore |
| for dummy in range(5): |
| wait_for_bfd_packet( |
| self, pcap_time_min=time.time() - self.vpp_clock_offset) |
| self.test_session.send_packet() |
| events = self.vapi.collect_events() |
| self.assert_equal(len(events), 0, "number of bfd events") |
| |
| def test_stale_echo(self): |
| """ stale echo packets don't keep a session up """ |
| bfd_session_up(self) |
| self.test_session.update(required_min_echo_rx=150000) |
| self.vapi.bfd_udp_set_echo_source( |
| sw_if_index=self.loopback0.sw_if_index) |
| self.test_session.send_packet() |
| # should be turned on - loopback echo packets |
| echo_packet = None |
| timeout_at = None |
| timeout_ok = False |
| for dummy in range(10 * self.vpp_session.detect_mult): |
| p = self.pg0.wait_for_packet(1) |
| if p[UDP].dport == BFD.udp_dport_echo: |
| if echo_packet is None: |
| self.logger.debug(ppp("Got first echo packet:", p)) |
| echo_packet = p |
| timeout_at = time.time() + self.vpp_session.detect_mult * \ |
| self.test_session.required_min_echo_rx / USEC_IN_SEC |
| else: |
| self.logger.debug(ppp("Got followup echo packet:", p)) |
| self.logger.debug(ppp("Looping back first echo packet:", p)) |
| echo_packet[Ether].dst = self.pg0.local_mac |
| self.pg0.add_stream(echo_packet) |
| self.pg_start() |
| elif p.haslayer(BFD): |
| self.logger.debug(ppp("Got packet:", p)) |
| if "P" in p.sprintf("%BFD.flags%"): |
| final = self.test_session.create_packet() |
| final[BFD].flags = "F" |
| self.test_session.send_packet(final) |
| if p[BFD].state == BFDState.down: |
| self.assertIsNotNone( |
| timeout_at, |
| "Session went down before first echo packet received") |
| now = time.time() |
| self.assertGreaterEqual( |
| now, timeout_at, |
| "Session timeout at %s, but is expected at %s" % |
| (now, timeout_at)) |
| self.assert_equal(p[BFD].diag, |
| BFDDiagCode.echo_function_failed, |
| BFDDiagCode) |
| events = self.vapi.collect_events() |
| self.assert_equal(len(events), 1, "number of bfd events") |
| self.assert_equal(events[0].state, BFDState.down, BFDState) |
| timeout_ok = True |
| break |
| else: |
| raise Exception(ppp("Received unknown packet:", p)) |
| self.test_session.send_packet() |
| self.assertTrue(timeout_ok, "Expected timeout event didn't occur") |
| |
| def test_invalid_echo_checksum(self): |
| """ echo packets with invalid checksum don't keep a session up """ |
| bfd_session_up(self) |
| self.test_session.update(required_min_echo_rx=150000) |
| self.vapi.bfd_udp_set_echo_source( |
| sw_if_index=self.loopback0.sw_if_index) |
| self.test_session.send_packet() |
| # should be turned on - loopback echo packets |
| timeout_at = None |
| timeout_ok = False |
| for dummy in range(10 * self.vpp_session.detect_mult): |
| p = self.pg0.wait_for_packet(1) |
| if p[UDP].dport == BFD.udp_dport_echo: |
| self.logger.debug(ppp("Got echo packet:", p)) |
| if timeout_at is None: |
| timeout_at = time.time() + self.vpp_session.detect_mult * \ |
| self.test_session.required_min_echo_rx / USEC_IN_SEC |
| p[BFD_vpp_echo].checksum = getrandbits(64) |
| p[Ether].dst = self.pg0.local_mac |
| self.logger.debug(ppp("Looping back modified echo packet:", p)) |
| self.pg0.add_stream(p) |
| self.pg_start() |
| elif p.haslayer(BFD): |
| self.logger.debug(ppp("Got packet:", p)) |
| if "P" in p.sprintf("%BFD.flags%"): |
| final = self.test_session.create_packet() |
| final[BFD].flags = "F" |
| self.test_session.send_packet(final) |
| if p[BFD].state == BFDState.down: |
| self.assertIsNotNone( |
| timeout_at, |
| "Session went down before first echo packet received") |
| now = time.time() |
| self.assertGreaterEqual( |
| now, timeout_at, |
| "Session timeout at %s, but is expected at %s" % |
| (now, timeout_at)) |
| self.assert_equal(p[BFD].diag, |
| BFDDiagCode.echo_function_failed, |
| BFDDiagCode) |
| events = self.vapi.collect_events() |
| self.assert_equal(len(events), 1, "number of bfd events") |
| self.assert_equal(events[0].state, BFDState.down, BFDState) |
| timeout_ok = True |
| break |
| else: |
| raise Exception(ppp("Received unknown packet:", p)) |
| self.test_session.send_packet() |
| self.assertTrue(timeout_ok, "Expected timeout event didn't occur") |
| |
| def test_admin_up_down(self): |
| """ put session admin-up and admin-down """ |
| bfd_session_up(self) |
| self.vpp_session.admin_down() |
| self.pg0.enable_capture() |
| e = self.vapi.wait_for_event(1, "bfd_udp_session_details") |
| verify_event(self, e, expected_state=BFDState.admin_down) |
| for dummy in range(2): |
| p = wait_for_bfd_packet(self) |
| self.assert_equal(p[BFD].state, BFDState.admin_down, BFDState) |
| # try to bring session up - shouldn't be possible |
| self.test_session.update(state=BFDState.init) |
| self.test_session.send_packet() |
| for dummy in range(2): |
| p = wait_for_bfd_packet(self) |
| self.assert_equal(p[BFD].state, BFDState.admin_down, BFDState) |
| self.vpp_session.admin_up() |
| self.test_session.update(state=BFDState.down) |
| e = self.vapi.wait_for_event(1, "bfd_udp_session_details") |
| verify_event(self, e, expected_state=BFDState.down) |
| p = wait_for_bfd_packet( |
| self, pcap_time_min=time.time() - self.vpp_clock_offset) |
| self.assert_equal(p[BFD].state, BFDState.down, BFDState) |
| self.test_session.send_packet() |
| p = wait_for_bfd_packet( |
| self, pcap_time_min=time.time() - self.vpp_clock_offset) |
| self.assert_equal(p[BFD].state, BFDState.init, BFDState) |
| e = self.vapi.wait_for_event(1, "bfd_udp_session_details") |
| verify_event(self, e, expected_state=BFDState.init) |
| self.test_session.update(state=BFDState.up) |
| self.test_session.send_packet() |
| p = wait_for_bfd_packet( |
| self, pcap_time_min=time.time() - self.vpp_clock_offset) |
| self.assert_equal(p[BFD].state, BFDState.up, BFDState) |
| e = self.vapi.wait_for_event(1, "bfd_udp_session_details") |
| verify_event(self, e, expected_state=BFDState.up) |
| |
| def test_config_change_remote_demand(self): |
| """ configuration change while peer in demand mode """ |
| bfd_session_up(self) |
| demand = self.test_session.create_packet() |
| demand[BFD].flags = "D" |
| self.test_session.send_packet(demand) |
| self.vpp_session.modify_parameters( |
| required_min_rx=2 * self.vpp_session.required_min_rx) |
| p = wait_for_bfd_packet( |
| self, pcap_time_min=time.time() - self.vpp_clock_offset) |
| # poll bit must be set |
| self.assertIn("P", p.sprintf("%BFD.flags%"), "Poll bit not set") |
| # terminate poll sequence |
| final = self.test_session.create_packet() |
| final[BFD].flags = "D+F" |
| self.test_session.send_packet(final) |
| # vpp should be quiet now again |
| transmit_time = 0.9 \ |
| * max(self.vpp_session.required_min_rx, |
| self.test_session.desired_min_tx) \ |
| / USEC_IN_SEC |
| count = 0 |
| for dummy in range(self.test_session.detect_mult * 2): |
| self.sleep(transmit_time) |
| self.test_session.send_packet(demand) |
| try: |
| p = wait_for_bfd_packet(self, timeout=0) |
| self.logger.error(ppp("Received unexpected packet:", p)) |
| count += 1 |
| except CaptureTimeoutError: |
| pass |
| events = self.vapi.collect_events() |
| for e in events: |
| self.logger.error("Received unexpected event: %s", e) |
| self.assert_equal(count, 0, "number of packets received") |
| self.assert_equal(len(events), 0, "number of events received") |
| |
| def test_intf_deleted(self): |
| """ interface with bfd session deleted """ |
| intf = VppLoInterface(self) |
| intf.config_ip4() |
| intf.admin_up() |
| sw_if_index = intf.sw_if_index |
| vpp_session = VppBFDUDPSession(self, intf, intf.remote_ip4) |
| vpp_session.add_vpp_config() |
| vpp_session.admin_up() |
| intf.remove_vpp_config() |
| e = self.vapi.wait_for_event(1, "bfd_udp_session_details") |
| self.assert_equal(e.sw_if_index, sw_if_index, "sw_if_index") |
| self.assertFalse(vpp_session.query_vpp_config()) |
| |
| |
| @tag_run_solo |
| class BFD6TestCase(VppTestCase): |
| """Bidirectional Forwarding Detection (BFD) (IPv6) """ |
| |
| pg0 = None |
| vpp_clock_offset = None |
| vpp_session = None |
| test_session = None |
| |
| @classmethod |
| def setUpClass(cls): |
| super(BFD6TestCase, cls).setUpClass() |
| cls.vapi.cli("set log class bfd level debug") |
| try: |
| cls.create_pg_interfaces([0]) |
| cls.pg0.config_ip6() |
| cls.pg0.configure_ipv6_neighbors() |
| cls.pg0.admin_up() |
| cls.pg0.resolve_ndp() |
| cls.create_loopback_interfaces(1) |
| cls.loopback0 = cls.lo_interfaces[0] |
| cls.loopback0.config_ip6() |
| cls.loopback0.admin_up() |
| |
| except Exception: |
| super(BFD6TestCase, cls).tearDownClass() |
| raise |
| |
| @classmethod |
| def tearDownClass(cls): |
| super(BFD6TestCase, cls).tearDownClass() |
| |
| def setUp(self): |
| super(BFD6TestCase, self).setUp() |
| self.factory = AuthKeyFactory() |
| self.vapi.want_bfd_events() |
| self.pg0.enable_capture() |
| try: |
| self.vpp_session = VppBFDUDPSession(self, self.pg0, |
| self.pg0.remote_ip6, |
| af=AF_INET6) |
| self.vpp_session.add_vpp_config() |
| self.vpp_session.admin_up() |
| self.test_session = BFDTestSession(self, self.pg0, AF_INET6) |
| self.logger.debug(self.vapi.cli("show adj nbr")) |
| except BaseException: |
| self.vapi.want_bfd_events(enable_disable=0) |
| raise |
| |
| def tearDown(self): |
| if not self.vpp_dead: |
| self.vapi.want_bfd_events(enable_disable=0) |
| self.vapi.collect_events() # clear the event queue |
| super(BFD6TestCase, self).tearDown() |
| |
| def test_session_up(self): |
| """ bring BFD session up """ |
| bfd_session_up(self) |
| |
| def test_session_up_by_ip(self): |
| """ bring BFD session up - first frame looked up by address pair """ |
| self.logger.info("BFD: Sending Slow control frame") |
| self.test_session.update(my_discriminator=randint(0, 40000000)) |
| self.test_session.send_packet() |
| self.pg0.enable_capture() |
| p = self.pg0.wait_for_packet(1) |
| self.assert_equal(p[BFD].your_discriminator, |
| self.test_session.my_discriminator, |
| "BFD - your discriminator") |
| self.assert_equal(p[BFD].state, BFDState.init, BFDState) |
| self.test_session.update(your_discriminator=p[BFD].my_discriminator, |
| state=BFDState.up) |
| self.logger.info("BFD: Waiting for event") |
| e = self.vapi.wait_for_event(1, "bfd_udp_session_details") |
| verify_event(self, e, expected_state=BFDState.init) |
| self.logger.info("BFD: Sending Up") |
| self.test_session.send_packet() |
| self.logger.info("BFD: Waiting for event") |
| e = self.vapi.wait_for_event(1, "bfd_udp_session_details") |
| verify_event(self, e, expected_state=BFDState.up) |
| self.logger.info("BFD: Session is Up") |
| self.test_session.update(state=BFDState.up) |
| self.test_session.send_packet() |
| self.assert_equal(self.vpp_session.state, BFDState.up, BFDState) |
| |
| def test_hold_up(self): |
| """ hold BFD session up """ |
| bfd_session_up(self) |
| for dummy in range(self.test_session.detect_mult * 2): |
| wait_for_bfd_packet(self) |
| self.test_session.send_packet() |
| self.assert_equal(len(self.vapi.collect_events()), 0, |
| "number of bfd events") |
| self.assert_equal(self.vpp_session.state, BFDState.up, BFDState) |
| |
| def test_echo_looped_back(self): |
| """ echo packets looped back """ |
| # don't need a session in this case.. |
| self.vpp_session.remove_vpp_config() |
| self.pg0.enable_capture() |
| echo_packet_count = 10 |
| # random source port low enough to increment a few times.. |
| udp_sport_tx = randint(1, 50000) |
| udp_sport_rx = udp_sport_tx |
| echo_packet = (Ether(src=self.pg0.remote_mac, |
| dst=self.pg0.local_mac) / |
| IPv6(src=self.pg0.remote_ip6, |
| dst=self.pg0.remote_ip6) / |
| UDP(dport=BFD.udp_dport_echo) / |
| Raw("this should be looped back")) |
| for dummy in range(echo_packet_count): |
| self.sleep(.01, "delay between echo packets") |
| echo_packet[UDP].sport = udp_sport_tx |
| udp_sport_tx += 1 |
| self.logger.debug(ppp("Sending packet:", echo_packet)) |
| self.pg0.add_stream(echo_packet) |
| self.pg_start() |
| for dummy in range(echo_packet_count): |
| p = self.pg0.wait_for_packet(1) |
| self.logger.debug(ppp("Got packet:", p)) |
| ether = p[Ether] |
| self.assert_equal(self.pg0.remote_mac, |
| ether.dst, "Destination MAC") |
| self.assert_equal(self.pg0.local_mac, ether.src, "Source MAC") |
| ip = p[IPv6] |
| self.assert_equal(self.pg0.remote_ip6, ip.dst, "Destination IP") |
| self.assert_equal(self.pg0.remote_ip6, ip.src, "Destination IP") |
| udp = p[UDP] |
| self.assert_equal(udp.dport, BFD.udp_dport_echo, |
| "UDP destination port") |
| self.assert_equal(udp.sport, udp_sport_rx, "UDP source port") |
| udp_sport_rx += 1 |
| # need to compare the hex payload here, otherwise BFD_vpp_echo |
| # gets in way |
| self.assertEqual(scapy.compat.raw(p[UDP].payload), |
| scapy.compat.raw(echo_packet[UDP].payload), |
| "Received packet is not the echo packet sent") |
| self.assert_equal(udp_sport_tx, udp_sport_rx, "UDP source port (== " |
| "ECHO packet identifier for test purposes)") |
| self.assert_equal(udp_sport_tx, udp_sport_rx, "UDP source port (== " |
| "ECHO packet identifier for test purposes)") |
| |
| def test_echo(self): |
| """ echo function """ |
| bfd_session_up(self) |
| self.test_session.update(required_min_echo_rx=150000) |
| self.test_session.send_packet() |
| detection_time = self.test_session.detect_mult *\ |
| self.vpp_session.required_min_rx / USEC_IN_SEC |
| # echo shouldn't work without echo source set |
| for dummy in range(10): |
| sleep = self.vpp_session.required_min_rx / USEC_IN_SEC |
| self.sleep(sleep, "delay before sending bfd packet") |
| self.test_session.send_packet() |
| p = wait_for_bfd_packet( |
| self, pcap_time_min=time.time() - self.vpp_clock_offset) |
| self.assert_equal(p[BFD].required_min_rx_interval, |
| self.vpp_session.required_min_rx, |
| "BFD required min rx interval") |
| self.test_session.send_packet() |
| self.vapi.bfd_udp_set_echo_source( |
| sw_if_index=self.loopback0.sw_if_index) |
| echo_seen = False |
| # should be turned on - loopback echo packets |
| for dummy in range(3): |
| loop_until = time.time() + 0.75 * detection_time |
| while time.time() < loop_until: |
| p = self.pg0.wait_for_packet(1) |
| self.logger.debug(ppp("Got packet:", p)) |
| if p[UDP].dport == BFD.udp_dport_echo: |
| self.assert_equal( |
| p[IPv6].dst, self.pg0.local_ip6, "BFD ECHO dst IP") |
| self.assertNotEqual(p[IPv6].src, self.loopback0.local_ip6, |
| "BFD ECHO src IP equal to loopback IP") |
| self.logger.debug(ppp("Looping back packet:", p)) |
| self.assert_equal(p[Ether].dst, self.pg0.remote_mac, |
| "ECHO packet destination MAC address") |
| p[Ether].dst = self.pg0.local_mac |
| self.pg0.add_stream(p) |
| self.pg_start() |
| echo_seen = True |
| elif p.haslayer(BFD): |
| if echo_seen: |
| self.assertGreaterEqual( |
| p[BFD].required_min_rx_interval, |
| 1000000) |
| if "P" in p.sprintf("%BFD.flags%"): |
| final = self.test_session.create_packet() |
| final[BFD].flags = "F" |
| self.test_session.send_packet(final) |
| else: |
| raise Exception(ppp("Received unknown packet:", p)) |
| |
| self.assert_equal(len(self.vapi.collect_events()), 0, |
| "number of bfd events") |
| self.test_session.send_packet() |
| self.assertTrue(echo_seen, "No echo packets received") |
| |
| def test_intf_deleted(self): |
| """ interface with bfd session deleted """ |
| intf = VppLoInterface(self) |
| intf.config_ip6() |
| intf.admin_up() |
| sw_if_index = intf.sw_if_index |
| vpp_session = VppBFDUDPSession( |
| self, intf, intf.remote_ip6, af=AF_INET6) |
| vpp_session.add_vpp_config() |
| vpp_session.admin_up() |
| intf.remove_vpp_config() |
| e = self.vapi.wait_for_event(1, "bfd_udp_session_details") |
| self.assert_equal(e.sw_if_index, sw_if_index, "sw_if_index") |
| self.assertFalse(vpp_session.query_vpp_config()) |
| |
| |
| @tag_run_solo |
| class BFDFIBTestCase(VppTestCase): |
| """ BFD-FIB interactions (IPv6) """ |
| |
| vpp_session = None |
| test_session = None |
| |
| @classmethod |
| def setUpClass(cls): |
| super(BFDFIBTestCase, cls).setUpClass() |
| |
| @classmethod |
| def tearDownClass(cls): |
| super(BFDFIBTestCase, cls).tearDownClass() |
| |
| def setUp(self): |
| super(BFDFIBTestCase, self).setUp() |
| self.create_pg_interfaces(range(1)) |
| |
| self.vapi.want_bfd_events() |
| self.pg0.enable_capture() |
| |
| for i in self.pg_interfaces: |
| i.admin_up() |
| i.config_ip6() |
| i.configure_ipv6_neighbors() |
| |
| def tearDown(self): |
| if not self.vpp_dead: |
| self.vapi.want_bfd_events(enable_disable=False) |
| |
| super(BFDFIBTestCase, self).tearDown() |
| |
| @staticmethod |
| def pkt_is_not_data_traffic(p): |
| """ not data traffic implies BFD or the usual IPv6 ND/RA""" |
| if p.haslayer(BFD) or is_ipv6_misc(p): |
| return True |
| return False |
| |
| def test_session_with_fib(self): |
| """ BFD-FIB interactions """ |
| |
| # packets to match against both of the routes |
| p = [(Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) / |
| IPv6(src="3001::1", dst="2001::1") / |
| UDP(sport=1234, dport=1234) / |
| Raw(b'\xa5' * 100)), |
| (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) / |
| IPv6(src="3001::1", dst="2002::1") / |
| UDP(sport=1234, dport=1234) / |
| Raw(b'\xa5' * 100))] |
| |
| # A recursive and a non-recursive route via a next-hop that |
| # will have a BFD session |
| ip_2001_s_64 = VppIpRoute(self, "2001::", 64, |
| [VppRoutePath(self.pg0.remote_ip6, |
| self.pg0.sw_if_index)]) |
| ip_2002_s_64 = VppIpRoute(self, "2002::", 64, |
| [VppRoutePath(self.pg0.remote_ip6, |
| 0xffffffff)]) |
| ip_2001_s_64.add_vpp_config() |
| ip_2002_s_64.add_vpp_config() |
| |
| # bring the session up now the routes are present |
| self.vpp_session = VppBFDUDPSession(self, |
| self.pg0, |
| self.pg0.remote_ip6, |
| af=AF_INET6) |
| self.vpp_session.add_vpp_config() |
| self.vpp_session.admin_up() |
| self.test_session = BFDTestSession(self, self.pg0, AF_INET6) |
| |
| # session is up - traffic passes |
| bfd_session_up(self) |
| |
| self.pg0.add_stream(p) |
| self.pg_start() |
| for packet in p: |
| captured = self.pg0.wait_for_packet( |
| 1, |
| filter_out_fn=self.pkt_is_not_data_traffic) |
| self.assertEqual(captured[IPv6].dst, |
| packet[IPv6].dst) |
| |
| # session is up - traffic is dropped |
| bfd_session_down(self) |
| |
| self.pg0.add_stream(p) |
| self.pg_start() |
| with self.assertRaises(CaptureTimeoutError): |
| self.pg0.wait_for_packet(1, self.pkt_is_not_data_traffic) |
| |
| # session is up - traffic passes |
| bfd_session_up(self) |
| |
| self.pg0.add_stream(p) |
| self.pg_start() |
| for packet in p: |
| captured = self.pg0.wait_for_packet( |
| 1, |
| filter_out_fn=self.pkt_is_not_data_traffic) |
| self.assertEqual(captured[IPv6].dst, |
| packet[IPv6].dst) |
| |
| |
| @unittest.skipUnless(running_extended_tests, "part of extended tests") |
| class BFDTunTestCase(VppTestCase): |
| """ BFD over GRE tunnel """ |
| |
| vpp_session = None |
| test_session = None |
| |
| @classmethod |
| def setUpClass(cls): |
| super(BFDTunTestCase, cls).setUpClass() |
| |
| @classmethod |
| def tearDownClass(cls): |
| super(BFDTunTestCase, cls).tearDownClass() |
| |
| def setUp(self): |
| super(BFDTunTestCase, self).setUp() |
| self.create_pg_interfaces(range(1)) |
| |
| self.vapi.want_bfd_events() |
| self.pg0.enable_capture() |
| |
| for i in self.pg_interfaces: |
| i.admin_up() |
| i.config_ip4() |
| i.resolve_arp() |
| |
| def tearDown(self): |
| if not self.vpp_dead: |
| self.vapi.want_bfd_events(enable_disable=0) |
| |
| super(BFDTunTestCase, self).tearDown() |
| |
| @staticmethod |
| def pkt_is_not_data_traffic(p): |
| """ not data traffic implies BFD or the usual IPv6 ND/RA""" |
| if p.haslayer(BFD) or is_ipv6_misc(p): |
| return True |
| return False |
| |
| def test_bfd_o_gre(self): |
| """ BFD-o-GRE """ |
| |
| # A GRE interface over which to run a BFD session |
| gre_if = VppGreInterface(self, |
| self.pg0.local_ip4, |
| self.pg0.remote_ip4) |
| gre_if.add_vpp_config() |
| gre_if.admin_up() |
| gre_if.config_ip4() |
| |
| # bring the session up now the routes are present |
| self.vpp_session = VppBFDUDPSession(self, |
| gre_if, |
| gre_if.remote_ip4, |
| is_tunnel=True) |
| self.vpp_session.add_vpp_config() |
| self.vpp_session.admin_up() |
| |
| self.test_session = BFDTestSession( |
| self, gre_if, AF_INET, |
| tunnel_header=(IP(src=self.pg0.remote_ip4, |
| dst=self.pg0.local_ip4) / |
| GRE()), |
| phy_interface=self.pg0) |
| |
| # packets to match against both of the routes |
| p = [(Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) / |
| IP(src=self.pg0.remote_ip4, dst=gre_if.remote_ip4) / |
| UDP(sport=1234, dport=1234) / |
| Raw(b'\xa5' * 100))] |
| |
| # session is up - traffic passes |
| bfd_session_up(self) |
| |
| self.send_and_expect(self.pg0, p, self.pg0) |
| |
| # bring session down |
| bfd_session_down(self) |
| |
| |
| @tag_run_solo |
| class BFDSHA1TestCase(VppTestCase): |
| """Bidirectional Forwarding Detection (BFD) (SHA1 auth) """ |
| |
| pg0 = None |
| vpp_clock_offset = None |
| vpp_session = None |
| test_session = None |
| |
| @classmethod |
| def setUpClass(cls): |
| super(BFDSHA1TestCase, cls).setUpClass() |
| cls.vapi.cli("set log class bfd level debug") |
| try: |
| cls.create_pg_interfaces([0]) |
| cls.pg0.config_ip4() |
| cls.pg0.admin_up() |
| cls.pg0.resolve_arp() |
| |
| except Exception: |
| super(BFDSHA1TestCase, cls).tearDownClass() |
| raise |
| |
| @classmethod |
| def tearDownClass(cls): |
| super(BFDSHA1TestCase, cls).tearDownClass() |
| |
| def setUp(self): |
| super(BFDSHA1TestCase, self).setUp() |
| self.factory = AuthKeyFactory() |
| self.vapi.want_bfd_events() |
| self.pg0.enable_capture() |
| |
| def tearDown(self): |
| if not self.vpp_dead: |
| self.vapi.want_bfd_events(enable_disable=False) |
| self.vapi.collect_events() # clear the event queue |
| super(BFDSHA1TestCase, self).tearDown() |
| |
| def test_session_up(self): |
| """ bring BFD session up """ |
| key = self.factory.create_random_key(self) |
| key.add_vpp_config() |
| self.vpp_session = VppBFDUDPSession(self, self.pg0, |
| self.pg0.remote_ip4, |
| sha1_key=key) |
| self.vpp_session.add_vpp_config() |
| self.vpp_session.admin_up() |
| self.test_session = BFDTestSession( |
| self, self.pg0, AF_INET, sha1_key=key, |
| bfd_key_id=self.vpp_session.bfd_key_id) |
| bfd_session_up(self) |
| |
| def test_hold_up(self): |
| """ hold BFD session up """ |
| key = self.factory.create_random_key(self) |
| key.add_vpp_config() |
| self.vpp_session = VppBFDUDPSession(self, self.pg0, |
| self.pg0.remote_ip4, |
| sha1_key=key) |
| self.vpp_session.add_vpp_config() |
| self.vpp_session.admin_up() |
| self.test_session = BFDTestSession( |
| self, self.pg0, AF_INET, sha1_key=key, |
| bfd_key_id=self.vpp_session.bfd_key_id) |
| bfd_session_up(self) |
| for dummy in range(self.test_session.detect_mult * 2): |
| wait_for_bfd_packet(self) |
| self.test_session.send_packet() |
| self.assert_equal(self.vpp_session.state, BFDState.up, BFDState) |
| |
| def test_hold_up_meticulous(self): |
| """ hold BFD session up - meticulous auth """ |
| key = self.factory.create_random_key( |
| self, BFDAuthType.meticulous_keyed_sha1) |
| key.add_vpp_config() |
| self.vpp_session = VppBFDUDPSession(self, self.pg0, |
| self.pg0.remote_ip4, sha1_key=key) |
| self.vpp_session.add_vpp_config() |
| self.vpp_session.admin_up() |
| # specify sequence number so that it wraps |
| self.test_session = BFDTestSession( |
| self, self.pg0, AF_INET, sha1_key=key, |
| bfd_key_id=self.vpp_session.bfd_key_id, |
| our_seq_number=0xFFFFFFFF - 4) |
| bfd_session_up(self) |
| for dummy in range(30): |
| wait_for_bfd_packet(self) |
| self.test_session.inc_seq_num() |
| self.test_session.send_packet() |
| self.assert_equal(self.vpp_session.state, BFDState.up, BFDState) |
| |
| def test_send_bad_seq_number(self): |
| """ session is not kept alive by msgs with bad sequence numbers""" |
| key = self.factory.create_random_key( |
| self, BFDAuthType.meticulous_keyed_sha1) |
| key.add_vpp_config() |
| self.vpp_session = VppBFDUDPSession(self, self.pg0, |
| self.pg0.remote_ip4, sha1_key=key) |
| self.vpp_session.add_vpp_config() |
| self.test_session = BFDTestSession( |
| self, self.pg0, AF_INET, sha1_key=key, |
| bfd_key_id=self.vpp_session.bfd_key_id) |
| bfd_session_up(self) |
| detection_time = self.test_session.detect_mult *\ |
| self.vpp_session.required_min_rx / USEC_IN_SEC |
| send_until = time.time() + 2 * detection_time |
| while time.time() < send_until: |
| self.test_session.send_packet() |
| self.sleep(0.7 * self.vpp_session.required_min_rx / USEC_IN_SEC, |
| "time between bfd packets") |
| e = self.vapi.collect_events() |
| # session should be down now, because the sequence numbers weren't |
| # updated |
| self.assert_equal(len(e), 1, "number of bfd events") |
| verify_event(self, e[0], expected_state=BFDState.down) |
| |
| def execute_rogue_session_scenario(self, vpp_bfd_udp_session, |
| legitimate_test_session, |
| rogue_test_session, |
| rogue_bfd_values=None): |
| """ execute a rogue session interaction scenario |
| |
| 1. create vpp session, add config |
| 2. bring the legitimate session up |
| 3. copy the bfd values from legitimate session to rogue session |
| 4. apply rogue_bfd_values to rogue session |
| 5. set rogue session state to down |
| 6. send message to take the session down from the rogue session |
| 7. assert that the legitimate session is unaffected |
| """ |
| |
| self.vpp_session = vpp_bfd_udp_session |
| self.vpp_session.add_vpp_config() |
| self.test_session = legitimate_test_session |
| # bring vpp session up |
| bfd_session_up(self) |
| # send packet from rogue session |
| rogue_test_session.update( |
| my_discriminator=self.test_session.my_discriminator, |
| your_discriminator=self.test_session.your_discriminator, |
| desired_min_tx=self.test_session.desired_min_tx, |
| required_min_rx=self.test_session.required_min_rx, |
| detect_mult=self.test_session.detect_mult, |
| diag=self.test_session.diag, |
| state=self.test_session.state, |
| auth_type=self.test_session.auth_type) |
| if rogue_bfd_values: |
| rogue_test_session.update(**rogue_bfd_values) |
| rogue_test_session.update(state=BFDState.down) |
| rogue_test_session.send_packet() |
| wait_for_bfd_packet(self) |
| self.assert_equal(self.vpp_session.state, BFDState.up, BFDState) |
| |
| def test_mismatch_auth(self): |
| """ session is not brought down by unauthenticated msg """ |
| key = self.factory.create_random_key(self) |
| key.add_vpp_config() |
| vpp_session = VppBFDUDPSession( |
| self, self.pg0, self.pg0.remote_ip4, sha1_key=key) |
| legitimate_test_session = BFDTestSession( |
| self, self.pg0, AF_INET, sha1_key=key, |
| bfd_key_id=vpp_session.bfd_key_id) |
| rogue_test_session = BFDTestSession(self, self.pg0, AF_INET) |
| self.execute_rogue_session_scenario(vpp_session, |
| legitimate_test_session, |
| rogue_test_session) |
| |
| def test_mismatch_bfd_key_id(self): |
| """ session is not brought down by msg with non-existent key-id """ |
| key = self.factory.create_random_key(self) |
| key.add_vpp_config() |
| vpp_session = VppBFDUDPSession( |
| self, self.pg0, self.pg0.remote_ip4, sha1_key=key) |
| # pick a different random bfd key id |
| x = randint(0, 255) |
| while x == vpp_session.bfd_key_id: |
| x = randint(0, 255) |
| legitimate_test_session = BFDTestSession( |
| self, self.pg0, AF_INET, sha1_key=key, |
| bfd_key_id=vpp_session.bfd_key_id) |
| rogue_test_session = BFDTestSession( |
| self, self.pg0, AF_INET, sha1_key=key, bfd_key_id=x) |
| self.execute_rogue_session_scenario(vpp_session, |
| legitimate_test_session, |
| rogue_test_session) |
| |
| def test_mismatched_auth_type(self): |
| """ session is not brought down by msg with wrong auth type """ |
| key = self.factory.create_random_key(self) |
| key.add_vpp_config() |
| vpp_session = VppBFDUDPSession( |
| self, self.pg0, self.pg0.remote_ip4, sha1_key=key) |
| legitimate_test_session = BFDTestSession( |
| self, self.pg0, AF_INET, sha1_key=key, |
| bfd_key_id=vpp_session.bfd_key_id) |
| rogue_test_session = BFDTestSession( |
| self, self.pg0, AF_INET, sha1_key=key, |
| bfd_key_id=vpp_session.bfd_key_id) |
| self.execute_rogue_session_scenario( |
| vpp_session, legitimate_test_session, rogue_test_session, |
| {'auth_type': BFDAuthType.keyed_md5}) |
| |
| def test_restart(self): |
| """ simulate remote peer restart and resynchronization """ |
| key = self.factory.create_random_key( |
| self, BFDAuthType.meticulous_keyed_sha1) |
| key.add_vpp_config() |
| self.vpp_session = VppBFDUDPSession(self, self.pg0, |
| self.pg0.remote_ip4, sha1_key=key) |
| self.vpp_session.add_vpp_config() |
| self.test_session = BFDTestSession( |
| self, self.pg0, AF_INET, sha1_key=key, |
| bfd_key_id=self.vpp_session.bfd_key_id, our_seq_number=0) |
| bfd_session_up(self) |
| # don't send any packets for 2*detection_time |
| detection_time = self.test_session.detect_mult *\ |
| self.vpp_session.required_min_rx / USEC_IN_SEC |
| self.sleep(2 * detection_time, "simulating peer restart") |
| events = self.vapi.collect_events() |
| self.assert_equal(len(events), 1, "number of bfd events") |
| verify_event(self, events[0], expected_state=BFDState.down) |
| self.test_session.update(state=BFDState.down) |
| # reset sequence number |
| self.test_session.our_seq_number = 0 |
| self.test_session.vpp_seq_number = None |
| # now throw away any pending packets |
| self.pg0.enable_capture() |
| self.test_session.my_discriminator = 0 |
| bfd_session_up(self) |
| |
| |
| @tag_run_solo |
| class BFDAuthOnOffTestCase(VppTestCase): |
| """Bidirectional Forwarding Detection (BFD) (changing auth) """ |
| |
| pg0 = None |
| vpp_session = None |
| test_session = None |
| |
| @classmethod |
| def setUpClass(cls): |
| super(BFDAuthOnOffTestCase, cls).setUpClass() |
| cls.vapi.cli("set log class bfd level debug") |
| try: |
| cls.create_pg_interfaces([0]) |
| cls.pg0.config_ip4() |
| cls.pg0.admin_up() |
| cls.pg0.resolve_arp() |
| |
| except Exception: |
| super(BFDAuthOnOffTestCase, cls).tearDownClass() |
| raise |
| |
| @classmethod |
| def tearDownClass(cls): |
| super(BFDAuthOnOffTestCase, cls).tearDownClass() |
| |
| def setUp(self): |
| super(BFDAuthOnOffTestCase, self).setUp() |
| self.factory = AuthKeyFactory() |
| self.vapi.want_bfd_events() |
| self.pg0.enable_capture() |
| |
| def tearDown(self): |
| if not self.vpp_dead: |
| self.vapi.want_bfd_events(enable_disable=False) |
| self.vapi.collect_events() # clear the event queue |
| super(BFDAuthOnOffTestCase, self).tearDown() |
| |
| def test_auth_on_immediate(self): |
| """ turn auth on without disturbing session state (immediate) """ |
| key = self.factory.create_random_key(self) |
| key.add_vpp_config() |
| self.vpp_session = VppBFDUDPSession(self, self.pg0, |
| self.pg0.remote_ip4) |
| self.vpp_session.add_vpp_config() |
| self.test_session = BFDTestSession(self, self.pg0, AF_INET) |
| bfd_session_up(self) |
| for dummy in range(self.test_session.detect_mult * 2): |
| p = wait_for_bfd_packet(self) |
| self.assert_equal(p[BFD].state, BFDState.up, BFDState) |
| self.test_session.send_packet() |
| self.vpp_session.activate_auth(key) |
| self.test_session.bfd_key_id = self.vpp_session.bfd_key_id |
| self.test_session.sha1_key = key |
| for dummy in range(self.test_session.detect_mult * 2): |
| p = wait_for_bfd_packet(self) |
| self.assert_equal(p[BFD].state, BFDState.up, BFDState) |
| self.test_session.send_packet() |
| self.assert_equal(self.vpp_session.state, BFDState.up, BFDState) |
| self.assert_equal(len(self.vapi.collect_events()), 0, |
| "number of bfd events") |
| |
| def test_auth_off_immediate(self): |
| """ turn auth off without disturbing session state (immediate) """ |
| key = self.factory.create_random_key(self) |
| key.add_vpp_config() |
| self.vpp_session = VppBFDUDPSession(self, self.pg0, |
| self.pg0.remote_ip4, sha1_key=key) |
| self.vpp_session.add_vpp_config() |
| self.test_session = BFDTestSession( |
| self, self.pg0, AF_INET, sha1_key=key, |
| bfd_key_id=self.vpp_session.bfd_key_id) |
| bfd_session_up(self) |
| # self.vapi.want_bfd_events(enable_disable=0) |
| for dummy in range(self.test_session.detect_mult * 2): |
| p = wait_for_bfd_packet(self) |
| self.assert_equal(p[BFD].state, BFDState.up, BFDState) |
| self.test_session.inc_seq_num() |
| self.test_session.send_packet() |
| self.vpp_session.deactivate_auth() |
| self.test_session.bfd_key_id = None |
| self.test_session.sha1_key = None |
| for dummy in range(self.test_session.detect_mult * 2): |
| p = wait_for_bfd_packet(self) |
| self.assert_equal(p[BFD].state, BFDState.up, BFDState) |
| self.test_session.inc_seq_num() |
| self.test_session.send_packet() |
| self.assert_equal(self.vpp_session.state, BFDState.up, BFDState) |
| self.assert_equal(len(self.vapi.collect_events()), 0, |
| "number of bfd events") |
| |
| def test_auth_change_key_immediate(self): |
| """ change auth key without disturbing session state (immediate) """ |
| key1 = self.factory.create_random_key(self) |
| key1.add_vpp_config() |
| key2 = self.factory.create_random_key(self) |
| key2.add_vpp_config() |
| self.vpp_session = VppBFDUDPSession(self, self.pg0, |
| self.pg0.remote_ip4, sha1_key=key1) |
| self.vpp_session.add_vpp_config() |
| self.test_session = BFDTestSession( |
| self, self.pg0, AF_INET, sha1_key=key1, |
| bfd_key_id=self.vpp_session.bfd_key_id) |
| bfd_session_up(self) |
| for dummy in range(self.test_session.detect_mult * 2): |
| p = wait_for_bfd_packet(self) |
| self.assert_equal(p[BFD].state, BFDState.up, BFDState) |
| self.test_session.send_packet() |
| self.vpp_session.activate_auth(key2) |
| self.test_session.bfd_key_id = self.vpp_session.bfd_key_id |
| self.test_session.sha1_key = key2 |
| for dummy in range(self.test_session.detect_mult * 2): |
| p = wait_for_bfd_packet(self) |
| self.assert_equal(p[BFD].state, BFDState.up, BFDState) |
| self.test_session.send_packet() |
| self.assert_equal(self.vpp_session.state, BFDState.up, BFDState) |
| self.assert_equal(len(self.vapi.collect_events()), 0, |
| "number of bfd events") |
| |
| def test_auth_on_delayed(self): |
| """ turn auth on without disturbing session state (delayed) """ |
| key = self.factory.create_random_key(self) |
| key.add_vpp_config() |
| self.vpp_session = VppBFDUDPSession(self, self.pg0, |
| self.pg0.remote_ip4) |
| self.vpp_session.add_vpp_config() |
| self.test_session = BFDTestSession(self, self.pg0, AF_INET) |
| bfd_session_up(self) |
| for dummy in range(self.test_session.detect_mult * 2): |
| wait_for_bfd_packet(self) |
| self.test_session.send_packet() |
| self.vpp_session.activate_auth(key, delayed=True) |
| for dummy in range(self.test_session.detect_mult * 2): |
| p = wait_for_bfd_packet(self) |
| self.assert_equal(p[BFD].state, BFDState.up, BFDState) |
| self.test_session.send_packet() |
| self.test_session.bfd_key_id = self.vpp_session.bfd_key_id |
| self.test_session.sha1_key = key |
| self.test_session.send_packet() |
| for dummy in range(self.test_session.detect_mult * 2): |
| p = wait_for_bfd_packet(self) |
| self.assert_equal(p[BFD].state, BFDState.up, BFDState) |
| self.test_session.send_packet() |
| self.assert_equal(self.vpp_session.state, BFDState.up, BFDState) |
| self.assert_equal(len(self.vapi.collect_events()), 0, |
| "number of bfd events") |
| |
| def test_auth_off_delayed(self): |
| """ turn auth off without disturbing session state (delayed) """ |
| key = self.factory.create_random_key(self) |
| key.add_vpp_config() |
| self.vpp_session = VppBFDUDPSession(self, self.pg0, |
| self.pg0.remote_ip4, sha1_key=key) |
| self.vpp_session.add_vpp_config() |
| self.test_session = BFDTestSession( |
| self, self.pg0, AF_INET, sha1_key=key, |
| bfd_key_id=self.vpp_session.bfd_key_id) |
| bfd_session_up(self) |
| for dummy in range(self.test_session.detect_mult * 2): |
| p = wait_for_bfd_packet(self) |
| self.assert_equal(p[BFD].state, BFDState.up, BFDState) |
| self.test_session.send_packet() |
| self.vpp_session.deactivate_auth(delayed=True) |
| for dummy in range(self.test_session.detect_mult * 2): |
| p = wait_for_bfd_packet(self) |
| self.assert_equal(p[BFD].state, BFDState.up, BFDState) |
| self.test_session.send_packet() |
| self.test_session.bfd_key_id = None |
| self.test_session.sha1_key = None |
| self.test_session.send_packet() |
| for dummy in range(self.test_session.detect_mult * 2): |
| p = wait_for_bfd_packet(self) |
| self.assert_equal(p[BFD].state, BFDState.up, BFDState) |
| self.test_session.send_packet() |
| self.assert_equal(self.vpp_session.state, BFDState.up, BFDState) |
| self.assert_equal(len(self.vapi.collect_events()), 0, |
| "number of bfd events") |
| |
| def test_auth_change_key_delayed(self): |
| """ change auth key without disturbing session state (delayed) """ |
| key1 = self.factory.create_random_key(self) |
| key1.add_vpp_config() |
| key2 = self.factory.create_random_key(self) |
| key2.add_vpp_config() |
| self.vpp_session = VppBFDUDPSession(self, self.pg0, |
| self.pg0.remote_ip4, sha1_key=key1) |
| self.vpp_session.add_vpp_config() |
| self.vpp_session.admin_up() |
| self.test_session = BFDTestSession( |
| self, self.pg0, AF_INET, sha1_key=key1, |
| bfd_key_id=self.vpp_session.bfd_key_id) |
| bfd_session_up(self) |
| for dummy in range(self.test_session.detect_mult * 2): |
| p = wait_for_bfd_packet(self) |
| self.assert_equal(p[BFD].state, BFDState.up, BFDState) |
| self.test_session.send_packet() |
| self.vpp_session.activate_auth(key2, delayed=True) |
| for dummy in range(self.test_session.detect_mult * 2): |
| p = wait_for_bfd_packet(self) |
| self.assert_equal(p[BFD].state, BFDState.up, BFDState) |
| self.test_session.send_packet() |
| self.test_session.bfd_key_id = self.vpp_session.bfd_key_id |
| self.test_session.sha1_key = key2 |
| self.test_session.send_packet() |
| for dummy in range(self.test_session.detect_mult * 2): |
| p = wait_for_bfd_packet(self) |
| self.assert_equal(p[BFD].state, BFDState.up, BFDState) |
| self.test_session.send_packet() |
| self.assert_equal(self.vpp_session.state, BFDState.up, BFDState) |
| self.assert_equal(len(self.vapi.collect_events()), 0, |
| "number of bfd events") |
| |
| |
| @tag_run_solo |
| class BFDCLITestCase(VppTestCase): |
| """Bidirectional Forwarding Detection (BFD) (CLI) """ |
| pg0 = None |
| |
| @classmethod |
| def setUpClass(cls): |
| super(BFDCLITestCase, cls).setUpClass() |
| cls.vapi.cli("set log class bfd level debug") |
| try: |
| cls.create_pg_interfaces((0,)) |
| cls.pg0.config_ip4() |
| cls.pg0.config_ip6() |
| cls.pg0.resolve_arp() |
| cls.pg0.resolve_ndp() |
| |
| except Exception: |
| super(BFDCLITestCase, cls).tearDownClass() |
| raise |
| |
| @classmethod |
| def tearDownClass(cls): |
| super(BFDCLITestCase, cls).tearDownClass() |
| |
| def setUp(self): |
| super(BFDCLITestCase, self).setUp() |
| self.factory = AuthKeyFactory() |
| self.pg0.enable_capture() |
| |
| def tearDown(self): |
| try: |
| self.vapi.want_bfd_events(enable_disable=False) |
| except UnexpectedApiReturnValueError: |
| # some tests aren't subscribed, so this is not an issue |
| pass |
| self.vapi.collect_events() # clear the event queue |
| super(BFDCLITestCase, self).tearDown() |
| |
| def cli_verify_no_response(self, cli): |
| """ execute a CLI, asserting that the response is empty """ |
| self.assert_equal(self.vapi.cli(cli), |
| "", |
| "CLI command response") |
| |
| def cli_verify_response(self, cli, expected): |
| """ execute a CLI, asserting that the response matches expectation """ |
| try: |
| reply = self.vapi.cli(cli) |
| except CliFailedCommandError as cli_error: |
| reply = str(cli_error) |
| self.assert_equal(reply.strip(), |
| expected, |
| "CLI command response") |
| |
| def test_show(self): |
| """ show commands """ |
| k1 = self.factory.create_random_key(self) |
| k1.add_vpp_config() |
| k2 = self.factory.create_random_key( |
| self, auth_type=BFDAuthType.meticulous_keyed_sha1) |
| k2.add_vpp_config() |
| s1 = VppBFDUDPSession(self, self.pg0, self.pg0.remote_ip4) |
| s1.add_vpp_config() |
| s2 = VppBFDUDPSession(self, self.pg0, self.pg0.remote_ip6, af=AF_INET6, |
| sha1_key=k2) |
| s2.add_vpp_config() |
| self.logger.info(self.vapi.ppcli("show bfd keys")) |
| self.logger.info(self.vapi.ppcli("show bfd sessions")) |
| self.logger.info(self.vapi.ppcli("show bfd")) |
| |
| def test_set_del_sha1_key(self): |
| """ set/delete SHA1 auth key """ |
| k = self.factory.create_random_key(self) |
| self.registry.register(k, self.logger) |
| self.cli_verify_no_response( |
| "bfd key set conf-key-id %s type keyed-sha1 secret %s" % |
| (k.conf_key_id, |
| "".join("{:02x}".format(scapy.compat.orb(c)) for c in k.key))) |
| self.assertTrue(k.query_vpp_config()) |
| self.vpp_session = VppBFDUDPSession( |
| self, self.pg0, self.pg0.remote_ip4, sha1_key=k) |
| self.vpp_session.add_vpp_config() |
| self.test_session = \ |
| BFDTestSession(self, self.pg0, AF_INET, sha1_key=k, |
| bfd_key_id=self.vpp_session.bfd_key_id) |
| self.vapi.want_bfd_events() |
| bfd_session_up(self) |
| bfd_session_down(self) |
| # try to replace the secret for the key - should fail because the key |
| # is in-use |
| k2 = self.factory.create_random_key(self) |
| self.cli_verify_response( |
| "bfd key set conf-key-id %s type keyed-sha1 secret %s" % |
| (k.conf_key_id, |
| "".join("{:02x}".format(scapy.compat.orb(c)) for c in k2.key)), |
| "bfd key set: `bfd_auth_set_key' API call failed, " |
| "rv=-103:BFD object in use") |
| # manipulating the session using old secret should still work |
| bfd_session_up(self) |
| bfd_session_down(self) |
| self.vpp_session.remove_vpp_config() |
| self.cli_verify_no_response( |
| "bfd key del conf-key-id %s" % k.conf_key_id) |
| self.assertFalse(k.query_vpp_config()) |
| |
| def test_set_del_meticulous_sha1_key(self): |
| """ set/delete meticulous SHA1 auth key """ |
| k = self.factory.create_random_key( |
| self, auth_type=BFDAuthType.meticulous_keyed_sha1) |
| self.registry.register(k, self.logger) |
| self.cli_verify_no_response( |
| "bfd key set conf-key-id %s type meticulous-keyed-sha1 secret %s" % |
| (k.conf_key_id, |
| "".join("{:02x}".format(scapy.compat.orb(c)) for c in k.key))) |
| self.assertTrue(k.query_vpp_config()) |
| self.vpp_session = VppBFDUDPSession(self, self.pg0, |
| self.pg0.remote_ip6, af=AF_INET6, |
| sha1_key=k) |
| self.vpp_session.add_vpp_config() |
| self.vpp_session.admin_up() |
| self.test_session = \ |
| BFDTestSession(self, self.pg0, AF_INET6, sha1_key=k, |
| bfd_key_id=self.vpp_session.bfd_key_id) |
| self.vapi.want_bfd_events() |
| bfd_session_up(self) |
| bfd_session_down(self) |
| # try to replace the secret for the key - should fail because the key |
| # is in-use |
| k2 = self.factory.create_random_key(self) |
| self.cli_verify_response( |
| "bfd key set conf-key-id %s type keyed-sha1 secret %s" % |
| (k.conf_key_id, |
| "".join("{:02x}".format(scapy.compat.orb(c)) for c in k2.key)), |
| "bfd key set: `bfd_auth_set_key' API call failed, " |
| "rv=-103:BFD object in use") |
| # manipulating the session using old secret should still work |
| bfd_session_up(self) |
| bfd_session_down(self) |
| self.vpp_session.remove_vpp_config() |
| self.cli_verify_no_response( |
| "bfd key del conf-key-id %s" % k.conf_key_id) |
| self.assertFalse(k.query_vpp_config()) |
| |
| def test_add_mod_del_bfd_udp(self): |
| """ create/modify/delete IPv4 BFD UDP session """ |
| vpp_session = VppBFDUDPSession( |
| self, self.pg0, self.pg0.remote_ip4) |
| self.registry.register(vpp_session, self.logger) |
| cli_add_cmd = "bfd udp session add interface %s local-addr %s " \ |
| "peer-addr %s desired-min-tx %s required-min-rx %s "\ |
| "detect-mult %s" % (self.pg0.name, self.pg0.local_ip4, |
| self.pg0.remote_ip4, |
| vpp_session.desired_min_tx, |
| vpp_session.required_min_rx, |
| vpp_session.detect_mult) |
| self.cli_verify_no_response(cli_add_cmd) |
| # 2nd add should fail |
| self.cli_verify_response( |
| cli_add_cmd, |
| "bfd udp session add: `bfd_add_add_session' API call" |
| " failed, rv=-101:Duplicate BFD object") |
| verify_bfd_session_config(self, vpp_session) |
| mod_session = VppBFDUDPSession( |
| self, self.pg0, self.pg0.remote_ip4, |
| required_min_rx=2 * vpp_session.required_min_rx, |
| desired_min_tx=3 * vpp_session.desired_min_tx, |
| detect_mult=4 * vpp_session.detect_mult) |
| self.cli_verify_no_response( |
| "bfd udp session mod interface %s local-addr %s peer-addr %s " |
| "desired-min-tx %s required-min-rx %s detect-mult %s" % |
| (self.pg0.name, self.pg0.local_ip4, self.pg0.remote_ip4, |
| mod_session.desired_min_tx, mod_session.required_min_rx, |
| mod_session.detect_mult)) |
| verify_bfd_session_config(self, mod_session) |
| cli_del_cmd = "bfd udp session del interface %s local-addr %s "\ |
| "peer-addr %s" % (self.pg0.name, |
| self.pg0.local_ip4, self.pg0.remote_ip4) |
| self.cli_verify_no_response(cli_del_cmd) |
| # 2nd del is expected to fail |
| self.cli_verify_response( |
| cli_del_cmd, "bfd udp session del: `bfd_udp_del_session' API call" |
| " failed, rv=-102:No such BFD object") |
| self.assertFalse(vpp_session.query_vpp_config()) |
| |
| def test_add_mod_del_bfd_udp6(self): |
| """ create/modify/delete IPv6 BFD UDP session """ |
| vpp_session = VppBFDUDPSession( |
| self, self.pg0, self.pg0.remote_ip6, af=AF_INET6) |
| self.registry.register(vpp_session, self.logger) |
| cli_add_cmd = "bfd udp session add interface %s local-addr %s " \ |
| "peer-addr %s desired-min-tx %s required-min-rx %s "\ |
| "detect-mult %s" % (self.pg0.name, self.pg0.local_ip6, |
| self.pg0.remote_ip6, |
| vpp_session.desired_min_tx, |
| vpp_session.required_min_rx, |
| vpp_session.detect_mult) |
| self.cli_verify_no_response(cli_add_cmd) |
| # 2nd add should fail |
| self.cli_verify_response( |
| cli_add_cmd, |
| "bfd udp session add: `bfd_add_add_session' API call" |
| " failed, rv=-101:Duplicate BFD object") |
| verify_bfd_session_config(self, vpp_session) |
| mod_session = VppBFDUDPSession( |
| self, self.pg0, self.pg0.remote_ip6, af=AF_INET6, |
| required_min_rx=2 * vpp_session.required_min_rx, |
| desired_min_tx=3 * vpp_session.desired_min_tx, |
| detect_mult=4 * vpp_session.detect_mult) |
| self.cli_verify_no_response( |
| "bfd udp session mod interface %s local-addr %s peer-addr %s " |
| "desired-min-tx %s required-min-rx %s detect-mult %s" % |
| (self.pg0.name, self.pg0.local_ip6, self.pg0.remote_ip6, |
| mod_session.desired_min_tx, |
| mod_session.required_min_rx, mod_session.detect_mult)) |
| verify_bfd_session_config(self, mod_session) |
| cli_del_cmd = "bfd udp session del interface %s local-addr %s "\ |
| "peer-addr %s" % (self.pg0.name, |
| self.pg0.local_ip6, self.pg0.remote_ip6) |
| self.cli_verify_no_response(cli_del_cmd) |
| # 2nd del is expected to fail |
| self.cli_verify_response( |
| cli_del_cmd, |
| "bfd udp session del: `bfd_udp_del_session' API call" |
| " failed, rv=-102:No such BFD object") |
| self.assertFalse(vpp_session.query_vpp_config()) |
| |
| def test_add_mod_del_bfd_udp_auth(self): |
| """ create/modify/delete IPv4 BFD UDP session (authenticated) """ |
| key = self.factory.create_random_key(self) |
| key.add_vpp_config() |
| vpp_session = VppBFDUDPSession( |
| self, self.pg0, self.pg0.remote_ip4, sha1_key=key) |
| self.registry.register(vpp_session, self.logger) |
| cli_add_cmd = "bfd udp session add interface %s local-addr %s " \ |
| "peer-addr %s desired-min-tx %s required-min-rx %s "\ |
| "detect-mult %s conf-key-id %s bfd-key-id %s"\ |
| % (self.pg0.name, self.pg0.local_ip4, self.pg0.remote_ip4, |
| vpp_session.desired_min_tx, vpp_session.required_min_rx, |
| vpp_session.detect_mult, key.conf_key_id, |
| vpp_session.bfd_key_id) |
| self.cli_verify_no_response(cli_add_cmd) |
| # 2nd add should fail |
| self.cli_verify_response( |
| cli_add_cmd, |
| "bfd udp session add: `bfd_add_add_session' API call" |
| " failed, rv=-101:Duplicate BFD object") |
| verify_bfd_session_config(self, vpp_session) |
| mod_session = VppBFDUDPSession( |
| self, self.pg0, self.pg0.remote_ip4, sha1_key=key, |
| bfd_key_id=vpp_session.bfd_key_id, |
| required_min_rx=2 * vpp_session.required_min_rx, |
| desired_min_tx=3 * vpp_session.desired_min_tx, |
| detect_mult=4 * vpp_session.detect_mult) |
| self.cli_verify_no_response( |
| "bfd udp session mod interface %s local-addr %s peer-addr %s " |
| "desired-min-tx %s required-min-rx %s detect-mult %s" % |
| (self.pg0.name, self.pg0.local_ip4, self.pg0.remote_ip4, |
| mod_session.desired_min_tx, |
| mod_session.required_min_rx, mod_session.detect_mult)) |
| verify_bfd_session_config(self, mod_session) |
| cli_del_cmd = "bfd udp session del interface %s local-addr %s "\ |
| "peer-addr %s" % (self.pg0.name, |
| self.pg0.local_ip4, self.pg0.remote_ip4) |
| self.cli_verify_no_response(cli_del_cmd) |
| # 2nd del is expected to fail |
| self.cli_verify_response( |
| cli_del_cmd, |
| "bfd udp session del: `bfd_udp_del_session' API call" |
| " failed, rv=-102:No such BFD object") |
| self.assertFalse(vpp_session.query_vpp_config()) |
| |
| def test_add_mod_del_bfd_udp6_auth(self): |
| """ create/modify/delete IPv6 BFD UDP session (authenticated) """ |
| key = self.factory.create_random_key( |
| self, auth_type=BFDAuthType.meticulous_keyed_sha1) |
| key.add_vpp_config() |
| vpp_session = VppBFDUDPSession( |
| self, self.pg0, self.pg0.remote_ip6, af=AF_INET6, sha1_key=key) |
| self.registry.register(vpp_session, self.logger) |
| cli_add_cmd = "bfd udp session add interface %s local-addr %s " \ |
| "peer-addr %s desired-min-tx %s required-min-rx %s "\ |
| "detect-mult %s conf-key-id %s bfd-key-id %s" \ |
| % (self.pg0.name, self.pg0.local_ip6, self.pg0.remote_ip6, |
| vpp_session.desired_min_tx, vpp_session.required_min_rx, |
| vpp_session.detect_mult, key.conf_key_id, |
| vpp_session.bfd_key_id) |
| self.cli_verify_no_response(cli_add_cmd) |
| # 2nd add should fail |
| self.cli_verify_response( |
| cli_add_cmd, |
| "bfd udp session add: `bfd_add_add_session' API call" |
| " failed, rv=-101:Duplicate BFD object") |
| verify_bfd_session_config(self, vpp_session) |
| mod_session = VppBFDUDPSession( |
| self, self.pg0, self.pg0.remote_ip6, af=AF_INET6, sha1_key=key, |
| bfd_key_id=vpp_session.bfd_key_id, |
| required_min_rx=2 * vpp_session.required_min_rx, |
| desired_min_tx=3 * vpp_session.desired_min_tx, |
| detect_mult=4 * vpp_session.detect_mult) |
| self.cli_verify_no_response( |
| "bfd udp session mod interface %s local-addr %s peer-addr %s " |
| "desired-min-tx %s required-min-rx %s detect-mult %s" % |
| (self.pg0.name, self.pg0.local_ip6, self.pg0.remote_ip6, |
| mod_session.desired_min_tx, |
| mod_session.required_min_rx, mod_session.detect_mult)) |
| verify_bfd_session_config(self, mod_session) |
| cli_del_cmd = "bfd udp session del interface %s local-addr %s "\ |
| "peer-addr %s" % (self.pg0.name, |
| self.pg0.local_ip6, self.pg0.remote_ip6) |
| self.cli_verify_no_response(cli_del_cmd) |
| # 2nd del is expected to fail |
| self.cli_verify_response( |
| cli_del_cmd, |
| "bfd udp session del: `bfd_udp_del_session' API call" |
| " failed, rv=-102:No such BFD object") |
| self.assertFalse(vpp_session.query_vpp_config()) |
| |
| def test_auth_on_off(self): |
| """ turn authentication on and off """ |
| key = self.factory.create_random_key( |
| self, auth_type=BFDAuthType.meticulous_keyed_sha1) |
| key.add_vpp_config() |
| session = VppBFDUDPSession(self, self.pg0, self.pg0.remote_ip4) |
| auth_session = VppBFDUDPSession(self, self.pg0, self.pg0.remote_ip4, |
| sha1_key=key) |
| session.add_vpp_config() |
| cli_activate = \ |
| "bfd udp session auth activate interface %s local-addr %s "\ |
| "peer-addr %s conf-key-id %s bfd-key-id %s"\ |
| % (self.pg0.name, self.pg0.local_ip4, self.pg0.remote_ip4, |
| key.conf_key_id, auth_session.bfd_key_id) |
| self.cli_verify_no_response(cli_activate) |
| verify_bfd_session_config(self, auth_session) |
| self.cli_verify_no_response(cli_activate) |
| verify_bfd_session_config(self, auth_session) |
| cli_deactivate = \ |
| "bfd udp session auth deactivate interface %s local-addr %s "\ |
| "peer-addr %s "\ |
| % (self.pg0.name, self.pg0.local_ip4, self.pg0.remote_ip4) |
| self.cli_verify_no_response(cli_deactivate) |
| verify_bfd_session_config(self, session) |
| self.cli_verify_no_response(cli_deactivate) |
| verify_bfd_session_config(self, session) |
| |
| def test_auth_on_off_delayed(self): |
| """ turn authentication on and off (delayed) """ |
| key = self.factory.create_random_key( |
| self, auth_type=BFDAuthType.meticulous_keyed_sha1) |
| key.add_vpp_config() |
| session = VppBFDUDPSession(self, self.pg0, self.pg0.remote_ip4) |
| auth_session = VppBFDUDPSession(self, self.pg0, self.pg0.remote_ip4, |
| sha1_key=key) |
| session.add_vpp_config() |
| cli_activate = \ |
| "bfd udp session auth activate interface %s local-addr %s "\ |
| "peer-addr %s conf-key-id %s bfd-key-id %s delayed yes"\ |
| % (self.pg0.name, self.pg0.local_ip4, self.pg0.remote_ip4, |
| key.conf_key_id, auth_session.bfd_key_id) |
| self.cli_verify_no_response(cli_activate) |
| verify_bfd_session_config(self, auth_session) |
| self.cli_verify_no_response(cli_activate) |
| verify_bfd_session_config(self, auth_session) |
| cli_deactivate = \ |
| "bfd udp session auth deactivate interface %s local-addr %s "\ |
| "peer-addr %s delayed yes"\ |
| % (self.pg0.name, self.pg0.local_ip4, self.pg0.remote_ip4) |
| self.cli_verify_no_response(cli_deactivate) |
| verify_bfd_session_config(self, session) |
| self.cli_verify_no_response(cli_deactivate) |
| verify_bfd_session_config(self, session) |
| |
| def test_admin_up_down(self): |
| """ put session admin-up and admin-down """ |
| session = VppBFDUDPSession(self, self.pg0, self.pg0.remote_ip4) |
| session.add_vpp_config() |
| cli_down = \ |
| "bfd udp session set-flags admin down interface %s local-addr %s "\ |
| "peer-addr %s "\ |
| % (self.pg0.name, self.pg0.local_ip4, self.pg0.remote_ip4) |
| cli_up = \ |
| "bfd udp session set-flags admin up interface %s local-addr %s "\ |
| "peer-addr %s "\ |
| % (self.pg0.name, self.pg0.local_ip4, self.pg0.remote_ip4) |
| self.cli_verify_no_response(cli_down) |
| verify_bfd_session_config(self, session, state=BFDState.admin_down) |
| self.cli_verify_no_response(cli_up) |
| verify_bfd_session_config(self, session, state=BFDState.down) |
| |
| def test_set_del_udp_echo_source(self): |
| """ set/del udp echo source """ |
| self.create_loopback_interfaces(1) |
| self.loopback0 = self.lo_interfaces[0] |
| self.loopback0.admin_up() |
| self.cli_verify_response("show bfd echo-source", |
| "UDP echo source is not set.") |
| cli_set = "bfd udp echo-source set interface %s" % self.loopback0.name |
| self.cli_verify_no_response(cli_set) |
| self.cli_verify_response("show bfd echo-source", |
| "UDP echo source is: %s\n" |
| "IPv4 address usable as echo source: none\n" |
| "IPv6 address usable as echo source: none" % |
| self.loopback0.name) |
| self.loopback0.config_ip4() |
| echo_ip4 = str(ipaddress.IPv4Address(int(ipaddress.IPv4Address( |
| self.loopback0.local_ip4)) ^ 1)) |
| self.cli_verify_response("show bfd echo-source", |
| "UDP echo source is: %s\n" |
| "IPv4 address usable as echo source: %s\n" |
| "IPv6 address usable as echo source: none" % |
| (self.loopback0.name, echo_ip4)) |
| echo_ip6 = str(ipaddress.IPv6Address(int(ipaddress.IPv6Address( |
| self.loopback0.local_ip6)) ^ 1)) |
| self.loopback0.config_ip6() |
| self.cli_verify_response("show bfd echo-source", |
| "UDP echo source is: %s\n" |
| "IPv4 address usable as echo source: %s\n" |
| "IPv6 address usable as echo source: %s" % |
| (self.loopback0.name, echo_ip4, echo_ip6)) |
| cli_del = "bfd udp echo-source del" |
| self.cli_verify_no_response(cli_del) |
| self.cli_verify_response("show bfd echo-source", |
| "UDP echo source is not set.") |
| |
| |
| if __name__ == '__main__': |
| unittest.main(testRunner=VppTestRunner) |