Add support for DPDK 18.05
Change-Id: I205932bc727c990011bbbe1dc6c0cf5349d19806
Signed-off-by: Damjan Marion <damarion@cisco.com>
diff --git a/dpdk/Makefile b/dpdk/Makefile
index 7b70346..c5d2a79 100644
--- a/dpdk/Makefile
+++ b/dpdk/Makefile
@@ -32,21 +32,27 @@
DPDK_BASE_URL ?= http://fast.dpdk.org/rel
DPDK_TARBALL := dpdk-$(DPDK_VERSION).tar.xz
DPDK_TAR_URL := $(DPDK_BASE_URL)/$(DPDK_TARBALL)
-DPDK_17.11_TARBALL_MD5_CKSUM := 53ee9e054a8797c9e67ffa0eb5d0c701
DPDK_18.02.1_TARBALL_MD5_CKSUM := 3bbb5468f662e1f7472d4abc5c4cf08e
-DPDK_SOURCE := $(B)/dpdk-stable-$(DPDK_VERSION)
+DPDK_18.05_TARBALL_MD5_CKSUM := 9fc86367cd9407ff6a8dfea56c4eddc4
MACHINE=$(shell uname -m)
+# replace dot with space, and if 3rd word exists we deal with stable dpdk rel
+ifeq ($(word 3,$(subst ., ,$(DPDK_VERSION))),)
+DPDK_SOURCE := $(B)/dpdk-$(DPDK_VERSION)
+else
+DPDK_SOURCE := $(B)/dpdk-stable-$(DPDK_VERSION)
+endif
+
NASM_BASE_URL := http://www.nasm.us/pub/nasm/releasebuilds
NASM_VER := 2.13.01
NASM_TARBALL := nasm-$(NASM_VER).tar.xz
NASM_TAR_URL := $(NASM_BASE_URL)/$(NASM_VER)/$(NASM_TARBALL)
NASM_SOURCE := $(B)/nasm-$(NASM_VER)
-ifeq ($(DPDK_VERSION),17.11)
-IPSEC_MB_VER ?= 0.47
-else
+ifneq (,$(findstring 18.02,$(DPDK_VERSION)))
IPSEC_MB_VER ?= 0.48
+else
+IPSEC_MB_VER ?= 0.49
endif
ifeq ($(MACHINE),$(filter $(MACHINE),x86_64))
@@ -158,6 +164,11 @@
DPDK_EXTRA_CFLAGS := -g -O0
endif
+ifeq ($(AESNI),y)
+IPSEC_MB_BUILD_PATH := $(B)/intel-ipsec-mb-$(IPSEC_MB_VER)
+DPDK_EXTRA_CFLAGS += -L$(IPSEC_MB_BUILD_PATH) -I$(IPSEC_MB_BUILD_PATH)
+endif
+
DPDK_MAKE_EXTRA_ARGS += AESNI_MULTI_BUFFER_LIB_PATH=$(AESNIMB_LIB_SOURCE)
# assemble DPDK make arguments
@@ -210,7 +221,6 @@
$(call set,RTE_LIBRTE_PMD_TAP,$(DPDK_TAP_PMD))
$(call set,RTE_LIBRTE_PMD_FAILSAFE,$(DPDK_FAILSAFE_PMD))
@# not needed
- $(call set,RTE_LIBRTE_TIMER,n)
$(call set,RTE_LIBRTE_CFGFILE,n)
$(call set,RTE_LIBRTE_LPM,n)
$(call set,RTE_LIBRTE_ACL,n)
@@ -308,7 +318,7 @@
build-ipsec-mb:
mkdir -p $(I)/lib/
# Do not build GCM stuff if we are building ISA_L
- make -C $(AESNIMB_LIB_SOURCE) -j \
+ make -C $(AESNIMB_LIB_SOURCE) -j SHARED=n \
EXTRA_CFLAGS=-fPIC NASM=$(NASM_SOURCE)/nasm
cp $(AESNIMB_LIB_SOURCE)/libIPSec_MB.a $(I)/lib/
diff --git a/dpdk/deb/debian/rules b/dpdk/deb/debian/rules
index b9a5863..7ef6ba1 100755
--- a/dpdk/deb/debian/rules
+++ b/dpdk/deb/debian/rules
@@ -28,8 +28,10 @@
dh_install -p$(PKG)-dkms \
$(SRC)/lib/librte_eal/common/include/rte_pci_dev_feature_defs.h \
$(SRC)/lib/librte_eal/common/include/rte_pci_dev_features.h \
- $(SRC)/lib/librte_eal/linuxapp/igb_uio/igb_uio.c \
- $(SRC)/lib/librte_eal/linuxapp/igb_uio/compat.h \
+ $(wildcard $(SRC)/*/*/*/igb_uio/igb_uio.c) \
+ $(wildcard $(SRC)/*/*/*/igb_uio/compat.h) \
+ $(wildcard $(SRC)/*/*/igb_uio/igb_uio.c) \
+ $(wildcard $(SRC)/*/*/igb_uio/compat.h) \
debian/dkms/Makefile \
/usr/src/$(PKG)-dkms-$(VERSION)
dh_install -p$(PKG)-dev --autodest /usr
diff --git a/dpdk/dpdk-17.02_patches/0001-dpdk-dev-net-mlx5-add-out-of-buffer-counter-to-extended-statistic.patch b/dpdk/dpdk-17.02_patches/0001-dpdk-dev-net-mlx5-add-out-of-buffer-counter-to-extended-statistic.patch
deleted file mode 100644
index 3ebf5e8..0000000
--- a/dpdk/dpdk-17.02_patches/0001-dpdk-dev-net-mlx5-add-out-of-buffer-counter-to-extended-statistic.patch
+++ /dev/null
@@ -1,135 +0,0 @@
-diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
-index 879da5e..2b4345a 100644
---- a/drivers/net/mlx5/mlx5.h
-+++ b/drivers/net/mlx5/mlx5.h
-@@ -197,6 +197,8 @@ struct mlx5_secondary_data {
- int mlx5_is_secondary(void);
- int priv_get_ifname(const struct priv *, char (*)[IF_NAMESIZE]);
- int priv_ifreq(const struct priv *, int req, struct ifreq *);
-+int priv_is_ib_cntr(const char *);
-+int priv_get_cntr_sysfs(struct priv *, const char *, uint64_t *);
- int priv_get_num_vfs(struct priv *, uint16_t *);
- int priv_get_mtu(struct priv *, uint16_t *);
- int priv_set_flags(struct priv *, unsigned int, unsigned int);
-diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
-index 2145965..6b64f44 100644
---- a/drivers/net/mlx5/mlx5_ethdev.c
-+++ b/drivers/net/mlx5/mlx5_ethdev.c
-@@ -234,6 +234,23 @@ struct priv *
- }
-
- /**
-+ * Check if the counter is located on ib counters file.
-+ *
-+ * @param[in] cntr
-+ * Counter name.
-+ *
-+ * @return
-+ * 1 if counter is located on ib counters file , 0 otherwise.
-+ */
-+int
-+priv_is_ib_cntr(const char *cntr)
-+{
-+ if (!strcmp(cntr, "out_of_buffer"))
-+ return 1;
-+ return 0;
-+}
-+
-+/**
- * Read from sysfs entry.
- *
- * @param[in] priv
-@@ -260,10 +277,15 @@ struct priv *
- if (priv_get_ifname(priv, &ifname))
- return -1;
-
-- MKSTR(path, "%s/device/net/%s/%s", priv->ctx->device->ibdev_path,
-- ifname, entry);
--
-- file = fopen(path, "rb");
-+ if (priv_is_ib_cntr(entry)) {
-+ MKSTR(path, "%s/ports/1/hw_counters/%s",
-+ priv->ctx->device->ibdev_path, entry);
-+ file = fopen(path, "rb");
-+ } else {
-+ MKSTR(path, "%s/device/net/%s/%s",
-+ priv->ctx->device->ibdev_path, ifname, entry);
-+ file = fopen(path, "rb");
-+ }
- if (file == NULL)
- return -1;
- ret = fread(buf, 1, size, file);
-@@ -469,6 +491,30 @@ struct priv *
- }
-
- /**
-+ * Read device counter from sysfs.
-+ *
-+ * @param priv
-+ * Pointer to private structure.
-+ * @param name
-+ * Counter name.
-+ * @param[out] cntr
-+ * Counter output buffer.
-+ *
-+ * @return
-+ * 0 on success, -1 on failure and errno is set.
-+ */
-+int
-+priv_get_cntr_sysfs(struct priv *priv, const char *name, uint64_t *cntr)
-+{
-+ unsigned long ulong_ctr;
-+
-+ if (priv_get_sysfs_ulong(priv, name, &ulong_ctr) == -1)
-+ return -1;
-+ *cntr = ulong_ctr;
-+ return 0;
-+}
-+
-+/**
- * Set device MTU.
- *
- * @param priv
-diff --git a/drivers/net/mlx5/mlx5_stats.c b/drivers/net/mlx5/mlx5_stats.c
-index 20c957e..a48ebea 100644
---- a/drivers/net/mlx5/mlx5_stats.c
-+++ b/drivers/net/mlx5/mlx5_stats.c
-@@ -125,6 +125,10 @@ struct mlx5_counter_ctrl {
- .dpdk_name = "tx_errors_phy",
- .ctr_name = "tx_errors_phy",
- },
-+ {
-+ .dpdk_name = "rx_out_of_buffer",
-+ .ctr_name = "out_of_buffer",
-+ },
- };
-
- static const unsigned int xstats_n = RTE_DIM(mlx5_counters_init);
-@@ -159,9 +163,15 @@ struct mlx5_counter_ctrl {
- WARN("unable to read statistic values from device");
- return -1;
- }
-- for (i = 0; i != xstats_n; ++i)
-- stats[i] = (uint64_t)
-- et_stats->data[xstats_ctrl->dev_table_idx[i]];
-+ for (i = 0; i != xstats_n; ++i) {
-+ if (priv_is_ib_cntr(mlx5_counters_init[i].ctr_name))
-+ priv_get_cntr_sysfs(priv,
-+ mlx5_counters_init[i].ctr_name,
-+ &stats[i]);
-+ else
-+ stats[i] = (uint64_t)
-+ et_stats->data[xstats_ctrl->dev_table_idx[i]];
-+ }
- return 0;
- }
-
-@@ -233,6 +243,8 @@ struct mlx5_counter_ctrl {
- }
- }
- for (j = 0; j != xstats_n; ++j) {
-+ if (priv_is_ib_cntr(mlx5_counters_init[i].ctr_name))
-+ continue;
- if (xstats_ctrl->dev_table_idx[j] >= dev_stats_n) {
- WARN("counter \"%s\" is not recognized",
- mlx5_counters_init[j].dpdk_name);
diff --git a/dpdk/dpdk-17.02_patches/0002-dpdk-dev-1-2-net-mlx5-remove-unused-interface-name-query.patch b/dpdk/dpdk-17.02_patches/0002-dpdk-dev-1-2-net-mlx5-remove-unused-interface-name-query.patch
deleted file mode 100644
index aa03639..0000000
--- a/dpdk/dpdk-17.02_patches/0002-dpdk-dev-1-2-net-mlx5-remove-unused-interface-name-query.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-diff --git a/drivers/net/mlx5/mlx5_stats.c b/drivers/net/mlx5/mlx5_stats.c
-index 20c957e..0c80e4f 100644
---- a/drivers/net/mlx5/mlx5_stats.c
-+++ b/drivers/net/mlx5/mlx5_stats.c
-@@ -177,17 +177,12 @@ struct mlx5_counter_ctrl {
- struct mlx5_xstats_ctrl *xstats_ctrl = &priv->xstats_ctrl;
- unsigned int i;
- unsigned int j;
-- char ifname[IF_NAMESIZE];
- struct ifreq ifr;
- struct ethtool_drvinfo drvinfo;
- struct ethtool_gstrings *strings = NULL;
- unsigned int dev_stats_n;
- unsigned int str_sz;
-
-- if (priv_get_ifname(priv, &ifname)) {
-- WARN("unable to get interface name");
-- return;
-- }
- /* How many statistics are available. */
- drvinfo.cmd = ETHTOOL_GDRVINFO;
- ifr.ifr_data = (caddr_t)&drvinfo;
diff --git a/dpdk/dpdk-17.02_patches/0003-dpdk-dev-2-2-net-mlx5-fix-extended-statistics-wrong-number.patch b/dpdk/dpdk-17.02_patches/0003-dpdk-dev-2-2-net-mlx5-fix-extended-statistics-wrong-number.patch
deleted file mode 100644
index 05c2e8d..0000000
--- a/dpdk/dpdk-17.02_patches/0003-dpdk-dev-2-2-net-mlx5-fix-extended-statistics-wrong-number.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-diff --git a/drivers/net/mlx5/mlx5_stats.c b/drivers/net/mlx5/mlx5_stats.c
-index 0c80e4f..60ffbaa 100644
---- a/drivers/net/mlx5/mlx5_stats.c
-+++ b/drivers/net/mlx5/mlx5_stats.c
-@@ -166,6 +166,29 @@ struct mlx5_counter_ctrl {
- }
-
- /**
-+ * Query the number of statistics provided by ETHTOOL.
-+ *
-+ * @param priv
-+ * Pointer to private structure.
-+ *
-+ * @return
-+ * Number of statistics on success, -1 on error.
-+ */
-+static int
-+priv_ethtool_get_stats_n(struct priv *priv) {
-+ struct ethtool_drvinfo drvinfo;
-+ struct ifreq ifr;
-+
-+ drvinfo.cmd = ETHTOOL_GDRVINFO;
-+ ifr.ifr_data = (caddr_t)&drvinfo;
-+ if (priv_ifreq(priv, SIOCETHTOOL, &ifr) != 0) {
-+ WARN("unable to query number of statistics");
-+ return -1;
-+ }
-+ return drvinfo.n_stats;
-+}
-+
-+/**
- * Init the structures to read device counters.
- *
- * @param priv
-@@ -178,19 +201,11 @@ struct mlx5_counter_ctrl {
- unsigned int i;
- unsigned int j;
- struct ifreq ifr;
-- struct ethtool_drvinfo drvinfo;
- struct ethtool_gstrings *strings = NULL;
- unsigned int dev_stats_n;
- unsigned int str_sz;
-
-- /* How many statistics are available. */
-- drvinfo.cmd = ETHTOOL_GDRVINFO;
-- ifr.ifr_data = (caddr_t)&drvinfo;
-- if (priv_ifreq(priv, SIOCETHTOOL, &ifr) != 0) {
-- WARN("unable to get driver info");
-- return;
-- }
-- dev_stats_n = drvinfo.n_stats;
-+ dev_stats_n = priv_ethtool_get_stats_n(priv);
- if (dev_stats_n < 1) {
- WARN("no extended statistics available");
- return;
-@@ -410,7 +425,15 @@ struct mlx5_counter_ctrl {
- int ret = xstats_n;
-
- if (n >= xstats_n && stats) {
-+ struct mlx5_xstats_ctrl *xstats_ctrl = &priv->xstats_ctrl;
-+ int stats_n;
-+
- priv_lock(priv);
-+ stats_n = priv_ethtool_get_stats_n(priv);
-+ if (stats_n < 0)
-+ return -1;
-+ if (xstats_ctrl->stats_n != stats_n)
-+ priv_xstats_init(priv);
- ret = priv_xstats_get(priv, stats);
- priv_unlock(priv);
- }
-@@ -427,8 +450,15 @@ struct mlx5_counter_ctrl {
- mlx5_xstats_reset(struct rte_eth_dev *dev)
- {
- struct priv *priv = mlx5_get_priv(dev);
-+ struct mlx5_xstats_ctrl *xstats_ctrl = &priv->xstats_ctrl;
-+ int stats_n;
-
- priv_lock(priv);
-+ stats_n = priv_ethtool_get_stats_n(priv);
-+ if (stats_n < 0)
-+ return;
-+ if (xstats_ctrl->stats_n != stats_n)
-+ priv_xstats_init(priv);
- priv_xstats_reset(priv);
- priv_unlock(priv);
- }
diff --git a/dpdk/dpdk-17.02_patches/0004-dpdk-dev-net-mlx5-fix-extended-statistics-counters-identification.patch b/dpdk/dpdk-17.02_patches/0004-dpdk-dev-net-mlx5-fix-extended-statistics-counters-identification.patch
deleted file mode 100644
index 8c066ad..0000000
--- a/dpdk/dpdk-17.02_patches/0004-dpdk-dev-net-mlx5-fix-extended-statistics-counters-identification.patch
+++ /dev/null
@@ -1,13 +0,0 @@
-diff --git a/drivers/net/mlx5/mlx5_stats.c b/drivers/net/mlx5/mlx5_stats.c
-index 1953293..703f48c 100644
---- a/drivers/net/mlx5/mlx5_stats.c
-+++ b/drivers/net/mlx5/mlx5_stats.c
-@@ -253,7 +253,7 @@ struct mlx5_counter_ctrl {
- }
- }
- for (j = 0; j != xstats_n; ++j) {
-- if (priv_is_ib_cntr(mlx5_counters_init[i].ctr_name))
-+ if (priv_is_ib_cntr(mlx5_counters_init[j].ctr_name))
- continue;
- if (xstats_ctrl->dev_table_idx[j] >= dev_stats_n) {
- WARN("counter \"%s\" is not recognized",
diff --git a/dpdk/dpdk-17.02_patches/0005-net-mlx5-fix-startup-when-flow-cannot-be-applied.patch b/dpdk/dpdk-17.02_patches/0005-net-mlx5-fix-startup-when-flow-cannot-be-applied.patch
deleted file mode 100644
index af928bb..0000000
--- a/dpdk/dpdk-17.02_patches/0005-net-mlx5-fix-startup-when-flow-cannot-be-applied.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 0866d640e42d6c54b2b3f15ebde9930e756ba4d5 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?N=C3=A9lio=20Laranjeiro?= <nelio.laranjeiro@6wind.com>
-Date: Wed, 22 Feb 2017 10:57:52 +0100
-Subject: [PATCH] net/mlx5: fix startup when flow cannot be applied
-
-When flows cannot be re-applied due to configuration modifications, the
-start function should rollback the configuration done.
-
-Fixes: 2097d0d1e2cc ("net/mlx5: support basic flow items and actions")
-Cc: stable@dpdk.org
-
-Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
----
- drivers/net/mlx5/mlx5_trigger.c | 21 ++++++++++++++++-----
- 1 file changed, 16 insertions(+), 5 deletions(-)
-
-diff --git a/drivers/net/mlx5/mlx5_trigger.c b/drivers/net/mlx5/mlx5_trigger.c
-index 30addd2..0acbf28 100644
---- a/drivers/net/mlx5/mlx5_trigger.c
-+++ b/drivers/net/mlx5/mlx5_trigger.c
-@@ -82,17 +82,28 @@ mlx5_dev_start(struct rte_eth_dev *dev)
- ERROR("%p: an error occurred while configuring hash RX queues:"
- " %s",
- (void *)priv, strerror(err));
-- /* Rollback. */
-- priv_special_flow_disable_all(priv);
-- priv_mac_addrs_disable(priv);
-- priv_destroy_hash_rxqs(priv);
-+ goto error;
- }
- if (dev->data->dev_conf.fdir_conf.mode != RTE_FDIR_MODE_NONE)
- priv_fdir_enable(priv);
-- priv_dev_interrupt_handler_install(priv, dev);
- err = priv_flow_start(priv);
-+ if (err) {
-+ priv->started = 0;
-+ ERROR("%p: an error occurred while configuring flows:"
-+ " %s",
-+ (void *)priv, strerror(err));
-+ goto error;
-+ }
-+ priv_dev_interrupt_handler_install(priv, dev);
- priv_xstats_init(priv);
- priv_unlock(priv);
-+ return 0;
-+error:
-+ /* Rollback. */
-+ priv_special_flow_disable_all(priv);
-+ priv_mac_addrs_disable(priv);
-+ priv_destroy_hash_rxqs(priv);
-+ priv_flow_stop(priv);
- return -err;
- }
-
---
-2.7.4
-
diff --git a/dpdk/dpdk-17.02_patches/0006-net-mlx5-add-hardware-TSO-support.patch b/dpdk/dpdk-17.02_patches/0006-net-mlx5-add-hardware-TSO-support.patch
deleted file mode 100644
index 929a613..0000000
--- a/dpdk/dpdk-17.02_patches/0006-net-mlx5-add-hardware-TSO-support.patch
+++ /dev/null
@@ -1,385 +0,0 @@
-From e25bad4a287924d26627ffe307f8a12824b87054 Mon Sep 17 00:00:00 2001
-From: Shahaf Shuler <shahafs@mellanox.com>
-Date: Thu, 2 Mar 2017 11:01:31 +0200
-Subject: [PATCH] net/mlx5: add hardware TSO support
-
-Implement support for hardware TSO.
-
-Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
-Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
----
- doc/guides/nics/features/mlx5.ini | 1 +
- doc/guides/nics/mlx5.rst | 12 ++++
- drivers/net/mlx5/mlx5.c | 18 ++++++
- drivers/net/mlx5/mlx5.h | 2 +
- drivers/net/mlx5/mlx5_defs.h | 3 +
- drivers/net/mlx5/mlx5_ethdev.c | 2 +
- drivers/net/mlx5/mlx5_rxtx.c | 123 +++++++++++++++++++++++++++++++++-----
- drivers/net/mlx5/mlx5_rxtx.h | 2 +
- drivers/net/mlx5/mlx5_txq.c | 13 ++++
- 9 files changed, 160 insertions(+), 16 deletions(-)
-
-diff --git a/doc/guides/nics/features/mlx5.ini b/doc/guides/nics/features/mlx5.ini
-index f20d214..8df25ce 100644
---- a/doc/guides/nics/features/mlx5.ini
-+++ b/doc/guides/nics/features/mlx5.ini
-@@ -11,6 +11,7 @@ Queue start/stop = Y
- MTU update = Y
- Jumbo frame = Y
- Scattered Rx = Y
-+TSO = Y
- Promiscuous mode = Y
- Allmulticast mode = Y
- Unicast MAC filter = Y
-diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
-index 5f6e594..9b0ba29 100644
---- a/doc/guides/nics/mlx5.rst
-+++ b/doc/guides/nics/mlx5.rst
-@@ -90,6 +90,7 @@ Features
- - Secondary process TX is supported.
- - KVM and VMware ESX SR-IOV modes are supported.
- - RSS hash result is supported.
-+- Hardware TSO.
-
- Limitations
- -----------
-@@ -186,9 +187,20 @@ Run-time configuration
- save PCI bandwidth and improve performance at the cost of a slightly
- higher CPU usage.
-
-+ This option cannot be used in conjunction with ``tso`` below. When ``tso``
-+ is set, ``txq_mpw_en`` is disabled.
-+
- It is currently only supported on the ConnectX-4 Lx and ConnectX-5
- families of adapters. Enabled by default.
-
-+- ``tso`` parameter [int]
-+
-+ A nonzero value enables hardware TSO.
-+ When hardware TSO is enabled, packets marked with TCP segmentation
-+ offload will be divided into segments by the hardware.
-+
-+ Disabled by default.
-+
- Prerequisites
- -------------
-
-diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
-index d4bd469..03ed3b3 100644
---- a/drivers/net/mlx5/mlx5.c
-+++ b/drivers/net/mlx5/mlx5.c
-@@ -84,6 +84,9 @@
- /* Device parameter to enable multi-packet send WQEs. */
- #define MLX5_TXQ_MPW_EN "txq_mpw_en"
-
-+/* Device parameter to enable hardware TSO offload. */
-+#define MLX5_TSO "tso"
-+
- /**
- * Retrieve integer value from environment variable.
- *
-@@ -290,6 +293,8 @@ mlx5_args_check(const char *key, const char *val, void *opaque)
- priv->txqs_inline = tmp;
- } else if (strcmp(MLX5_TXQ_MPW_EN, key) == 0) {
- priv->mps &= !!tmp; /* Enable MPW only if HW supports */
-+ } else if (strcmp(MLX5_TSO, key) == 0) {
-+ priv->tso = !!tmp;
- } else {
- WARN("%s: unknown parameter", key);
- return -EINVAL;
-@@ -316,6 +321,7 @@ mlx5_args(struct priv *priv, struct rte_devargs *devargs)
- MLX5_TXQ_INLINE,
- MLX5_TXQS_MIN_INLINE,
- MLX5_TXQ_MPW_EN,
-+ MLX5_TSO,
- NULL,
- };
- struct rte_kvargs *kvlist;
-@@ -479,6 +485,7 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
- IBV_EXP_DEVICE_ATTR_RX_HASH |
- IBV_EXP_DEVICE_ATTR_VLAN_OFFLOADS |
- IBV_EXP_DEVICE_ATTR_RX_PAD_END_ALIGN |
-+ IBV_EXP_DEVICE_ATTR_TSO_CAPS |
- 0;
-
- DEBUG("using port %u (%08" PRIx32 ")", port, test);
-@@ -580,11 +587,22 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
-
- priv_get_num_vfs(priv, &num_vfs);
- priv->sriov = (num_vfs || sriov);
-+ priv->tso = ((priv->tso) &&
-+ (exp_device_attr.tso_caps.max_tso > 0) &&
-+ (exp_device_attr.tso_caps.supported_qpts &
-+ (1 << IBV_QPT_RAW_ETH)));
-+ if (priv->tso)
-+ priv->max_tso_payload_sz =
-+ exp_device_attr.tso_caps.max_tso;
- if (priv->mps && !mps) {
- ERROR("multi-packet send not supported on this device"
- " (" MLX5_TXQ_MPW_EN ")");
- err = ENOTSUP;
- goto port_error;
-+ } else if (priv->mps && priv->tso) {
-+ WARN("multi-packet send not supported in conjunction "
-+ "with TSO. MPS disabled");
-+ priv->mps = 0;
- }
- /* Allocate and register default RSS hash keys. */
- priv->rss_conf = rte_calloc(__func__, hash_rxq_init_n,
-diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
-index 4c4b9d4..93f129b 100644
---- a/drivers/net/mlx5/mlx5.h
-+++ b/drivers/net/mlx5/mlx5.h
-@@ -126,6 +126,8 @@ struct priv {
- unsigned int mps:1; /* Whether multi-packet send is supported. */
- unsigned int cqe_comp:1; /* Whether CQE compression is enabled. */
- unsigned int pending_alarm:1; /* An alarm is pending. */
-+ unsigned int tso:1; /* Whether TSO is supported. */
-+ unsigned int max_tso_payload_sz; /* Maximum TCP payload for TSO. */
- unsigned int txq_inline; /* Maximum packet size for inlining. */
- unsigned int txqs_inline; /* Queue number threshold for inlining. */
- /* RX/TX queues. */
-diff --git a/drivers/net/mlx5/mlx5_defs.h b/drivers/net/mlx5/mlx5_defs.h
-index e91d245..eecb908 100644
---- a/drivers/net/mlx5/mlx5_defs.h
-+++ b/drivers/net/mlx5/mlx5_defs.h
-@@ -79,4 +79,7 @@
- /* Maximum number of extended statistics counters. */
- #define MLX5_MAX_XSTATS 32
-
-+/* Maximum Packet headers size (L2+L3+L4) for TSO. */
-+#define MLX5_MAX_TSO_HEADER 128
-+
- #endif /* RTE_PMD_MLX5_DEFS_H_ */
-diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
-index 5677f03..5542193 100644
---- a/drivers/net/mlx5/mlx5_ethdev.c
-+++ b/drivers/net/mlx5/mlx5_ethdev.c
-@@ -693,6 +693,8 @@ mlx5_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
- (DEV_TX_OFFLOAD_IPV4_CKSUM |
- DEV_TX_OFFLOAD_UDP_CKSUM |
- DEV_TX_OFFLOAD_TCP_CKSUM);
-+ if (priv->tso)
-+ info->tx_offload_capa |= DEV_TX_OFFLOAD_TCP_TSO;
- if (priv_get_ifname(priv, &ifname) == 0)
- info->if_index = if_nametoindex(ifname);
- /* FIXME: RETA update/query API expects the callee to know the size of
-diff --git a/drivers/net/mlx5/mlx5_rxtx.c b/drivers/net/mlx5/mlx5_rxtx.c
-index 4d5455b..98889f6 100644
---- a/drivers/net/mlx5/mlx5_rxtx.c
-+++ b/drivers/net/mlx5/mlx5_rxtx.c
-@@ -365,6 +365,7 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n)
- const unsigned int elts_n = 1 << txq->elts_n;
- unsigned int i = 0;
- unsigned int j = 0;
-+ unsigned int k = 0;
- unsigned int max;
- uint16_t max_wqe;
- unsigned int comp;
-@@ -392,8 +393,10 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n)
- uintptr_t addr;
- uint64_t naddr;
- uint16_t pkt_inline_sz = MLX5_WQE_DWORD_SIZE + 2;
-+ uint16_t tso_header_sz = 0;
- uint16_t ehdr;
- uint8_t cs_flags = 0;
-+ uint64_t tso = 0;
- #ifdef MLX5_PMD_SOFT_COUNTERS
- uint32_t total_length = 0;
- #endif
-@@ -465,14 +468,74 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n)
- length -= pkt_inline_sz;
- addr += pkt_inline_sz;
- }
-+ if (txq->tso_en) {
-+ tso = buf->ol_flags & PKT_TX_TCP_SEG;
-+ if (tso) {
-+ uintptr_t end = (uintptr_t)
-+ (((uintptr_t)txq->wqes) +
-+ (1 << txq->wqe_n) *
-+ MLX5_WQE_SIZE);
-+ unsigned int copy_b;
-+ uint8_t vlan_sz = (buf->ol_flags &
-+ PKT_TX_VLAN_PKT) ? 4 : 0;
-+
-+ tso_header_sz = buf->l2_len + vlan_sz +
-+ buf->l3_len + buf->l4_len;
-+
-+ if (unlikely(tso_header_sz >
-+ MLX5_MAX_TSO_HEADER))
-+ break;
-+ copy_b = tso_header_sz - pkt_inline_sz;
-+ /* First seg must contain all headers. */
-+ assert(copy_b <= length);
-+ raw += MLX5_WQE_DWORD_SIZE;
-+ if (copy_b &&
-+ ((end - (uintptr_t)raw) > copy_b)) {
-+ uint16_t n = (MLX5_WQE_DS(copy_b) -
-+ 1 + 3) / 4;
-+
-+ if (unlikely(max_wqe < n))
-+ break;
-+ max_wqe -= n;
-+ rte_memcpy((void *)raw,
-+ (void *)addr, copy_b);
-+ addr += copy_b;
-+ length -= copy_b;
-+ pkt_inline_sz += copy_b;
-+ /*
-+ * Another DWORD will be added
-+ * in the inline part.
-+ */
-+ raw += MLX5_WQE_DS(copy_b) *
-+ MLX5_WQE_DWORD_SIZE -
-+ MLX5_WQE_DWORD_SIZE;
-+ } else {
-+ /* NOP WQE. */
-+ wqe->ctrl = (rte_v128u32_t){
-+ htonl(txq->wqe_ci << 8),
-+ htonl(txq->qp_num_8s | 1),
-+ 0,
-+ 0,
-+ };
-+ ds = 1;
-+ total_length = 0;
-+ pkts--;
-+ pkts_n++;
-+ elts_head = (elts_head - 1) &
-+ (elts_n - 1);
-+ k++;
-+ goto next_wqe;
-+ }
-+ }
-+ }
- /* Inline if enough room. */
-- if (txq->max_inline) {
-+ if (txq->inline_en || tso) {
- uintptr_t end = (uintptr_t)
- (((uintptr_t)txq->wqes) +
- (1 << txq->wqe_n) * MLX5_WQE_SIZE);
- unsigned int max_inline = txq->max_inline *
- RTE_CACHE_LINE_SIZE -
-- MLX5_WQE_DWORD_SIZE;
-+ (pkt_inline_sz - 2);
- uintptr_t addr_end = (addr + max_inline) &
- ~(RTE_CACHE_LINE_SIZE - 1);
- unsigned int copy_b = (addr_end > addr) ?
-@@ -491,6 +554,18 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n)
- if (unlikely(max_wqe < n))
- break;
- max_wqe -= n;
-+ if (tso) {
-+ uint32_t inl =
-+ htonl(copy_b | MLX5_INLINE_SEG);
-+
-+ pkt_inline_sz =
-+ MLX5_WQE_DS(tso_header_sz) *
-+ MLX5_WQE_DWORD_SIZE;
-+ rte_memcpy((void *)raw,
-+ (void *)&inl, sizeof(inl));
-+ raw += sizeof(inl);
-+ pkt_inline_sz += sizeof(inl);
-+ }
- rte_memcpy((void *)raw, (void *)addr, copy_b);
- addr += copy_b;
- length -= copy_b;
-@@ -591,18 +666,34 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n)
- next_pkt:
- ++i;
- /* Initialize known and common part of the WQE structure. */
-- wqe->ctrl = (rte_v128u32_t){
-- htonl((txq->wqe_ci << 8) | MLX5_OPCODE_SEND),
-- htonl(txq->qp_num_8s | ds),
-- 0,
-- 0,
-- };
-- wqe->eseg = (rte_v128u32_t){
-- 0,
-- cs_flags,
-- 0,
-- (ehdr << 16) | htons(pkt_inline_sz),
-- };
-+ if (tso) {
-+ wqe->ctrl = (rte_v128u32_t){
-+ htonl((txq->wqe_ci << 8) | MLX5_OPCODE_TSO),
-+ htonl(txq->qp_num_8s | ds),
-+ 0,
-+ 0,
-+ };
-+ wqe->eseg = (rte_v128u32_t){
-+ 0,
-+ cs_flags | (htons(buf->tso_segsz) << 16),
-+ 0,
-+ (ehdr << 16) | htons(tso_header_sz),
-+ };
-+ } else {
-+ wqe->ctrl = (rte_v128u32_t){
-+ htonl((txq->wqe_ci << 8) | MLX5_OPCODE_SEND),
-+ htonl(txq->qp_num_8s | ds),
-+ 0,
-+ 0,
-+ };
-+ wqe->eseg = (rte_v128u32_t){
-+ 0,
-+ cs_flags,
-+ 0,
-+ (ehdr << 16) | htons(pkt_inline_sz),
-+ };
-+ }
-+next_wqe:
- txq->wqe_ci += (ds + 3) / 4;
- #ifdef MLX5_PMD_SOFT_COUNTERS
- /* Increment sent bytes counter. */
-@@ -610,10 +701,10 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n)
- #endif
- } while (pkts_n);
- /* Take a shortcut if nothing must be sent. */
-- if (unlikely(i == 0))
-+ if (unlikely((i + k) == 0))
- return 0;
- /* Check whether completion threshold has been reached. */
-- comp = txq->elts_comp + i + j;
-+ comp = txq->elts_comp + i + j + k;
- if (comp >= MLX5_TX_COMP_THRESH) {
- volatile struct mlx5_wqe_ctrl *w =
- (volatile struct mlx5_wqe_ctrl *)wqe;
-diff --git a/drivers/net/mlx5/mlx5_rxtx.h b/drivers/net/mlx5/mlx5_rxtx.h
-index 41a34d7..6b328cf 100644
---- a/drivers/net/mlx5/mlx5_rxtx.h
-+++ b/drivers/net/mlx5/mlx5_rxtx.h
-@@ -254,6 +254,8 @@ struct txq {
- uint16_t cqe_n:4; /* Number of CQ elements (in log2). */
- uint16_t wqe_n:4; /* Number of of WQ elements (in log2). */
- uint16_t max_inline; /* Multiple of RTE_CACHE_LINE_SIZE to inline. */
-+ uint16_t inline_en:1; /* When set inline is enabled. */
-+ uint16_t tso_en:1; /* When set hardware TSO is enabled. */
- uint32_t qp_num_8s; /* QP number shifted by 8. */
- volatile struct mlx5_cqe (*cqes)[]; /* Completion queue. */
- volatile void *wqes; /* Work queue (use volatile to write into). */
-diff --git a/drivers/net/mlx5/mlx5_txq.c b/drivers/net/mlx5/mlx5_txq.c
-index 949035b..995b763 100644
---- a/drivers/net/mlx5/mlx5_txq.c
-+++ b/drivers/net/mlx5/mlx5_txq.c
-@@ -342,6 +342,19 @@ txq_ctrl_setup(struct rte_eth_dev *dev, struct txq_ctrl *txq_ctrl,
- RTE_CACHE_LINE_SIZE);
- attr.init.cap.max_inline_data =
- tmpl.txq.max_inline * RTE_CACHE_LINE_SIZE;
-+ tmpl.txq.inline_en = 1;
-+ }
-+ if (priv->tso) {
-+ uint16_t max_tso_inline = ((MLX5_MAX_TSO_HEADER +
-+ (RTE_CACHE_LINE_SIZE - 1)) /
-+ RTE_CACHE_LINE_SIZE);
-+
-+ attr.init.max_tso_header =
-+ max_tso_inline * RTE_CACHE_LINE_SIZE;
-+ attr.init.comp_mask |= IBV_EXP_QP_INIT_ATTR_MAX_TSO_HEADER;
-+ tmpl.txq.max_inline = RTE_MAX(tmpl.txq.max_inline,
-+ max_tso_inline);
-+ tmpl.txq.tso_en = 1;
- }
- tmpl.qp = ibv_exp_create_qp(priv->ctx, &attr.init);
- if (tmpl.qp == NULL) {
---
-2.7.4
-
diff --git a/dpdk/dpdk-17.02_patches/0007-add-hardware-checksum-offload-for-tunnel-pa.patch b/dpdk/dpdk-17.02_patches/0007-add-hardware-checksum-offload-for-tunnel-pa.patch
deleted file mode 100644
index bbcce48..0000000
--- a/dpdk/dpdk-17.02_patches/0007-add-hardware-checksum-offload-for-tunnel-pa.patch
+++ /dev/null
@@ -1,194 +0,0 @@
-From f0dda2ab16635894b1e3836d0b960b9270a3b491 Mon Sep 17 00:00:00 2001
-From: Shahaf Shuler <shahafs@mellanox.com>
-Date: Thu, 2 Mar 2017 11:05:44 +0200
-Subject: [PATCH] net/mlx5: add hardware checksum offload for tunnel packets
-
-Prior to this commit Tx checksum offload was supported only for the
-inner headers.
-This commit adds support for the hardware to compute the checksum for the
-outer headers as well.
-
-The support is for tunneling protocols GRE and VXLAN.
-
-Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
-Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
----
- doc/guides/nics/features/mlx5.ini | 2 ++
- doc/guides/nics/mlx5.rst | 3 ++-
- drivers/net/mlx5/mlx5.c | 7 +++++++
- drivers/net/mlx5/mlx5.h | 2 ++
- drivers/net/mlx5/mlx5_ethdev.c | 2 ++
- drivers/net/mlx5/mlx5_prm.h | 6 ++++++
- drivers/net/mlx5/mlx5_rxtx.c | 14 +++++++++++++-
- drivers/net/mlx5/mlx5_rxtx.h | 2 ++
- drivers/net/mlx5/mlx5_txq.c | 2 ++
- 9 files changed, 38 insertions(+), 2 deletions(-)
-
-diff --git a/doc/guides/nics/features/mlx5.ini b/doc/guides/nics/features/mlx5.ini
-index 8df25ce..1814f82 100644
---- a/doc/guides/nics/features/mlx5.ini
-+++ b/doc/guides/nics/features/mlx5.ini
-@@ -27,6 +27,8 @@ CRC offload = Y
- VLAN offload = Y
- L3 checksum offload = Y
- L4 checksum offload = Y
-+Inner L3 checksum = Y
-+Inner L4 checksum = Y
- Packet type parsing = Y
- Basic stats = Y
- Stats per queue = Y
-diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
-index 9b0ba29..41f3a47 100644
---- a/doc/guides/nics/mlx5.rst
-+++ b/doc/guides/nics/mlx5.rst
-@@ -91,13 +91,14 @@ Features
- - KVM and VMware ESX SR-IOV modes are supported.
- - RSS hash result is supported.
- - Hardware TSO.
-+- Hardware checksum TX offload for VXLAN and GRE.
-
- Limitations
- -----------
-
- - Inner RSS for VXLAN frames is not supported yet.
- - Port statistics through software counters only.
--- Hardware checksum offloads for VXLAN inner header are not supported yet.
-+- Hardware checksum RX offloads for VXLAN inner header are not supported yet.
- - Secondary process RX is not supported.
-
- Configuration
-diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
-index 03ed3b3..6f42948 100644
---- a/drivers/net/mlx5/mlx5.c
-+++ b/drivers/net/mlx5/mlx5.c
-@@ -375,6 +375,7 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
- struct ibv_device_attr device_attr;
- unsigned int sriov;
- unsigned int mps;
-+ unsigned int tunnel_en;
- int idx;
- int i;
-
-@@ -429,12 +430,17 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
- * as all ConnectX-5 devices.
- */
- switch (pci_dev->id.device_id) {
-+ case PCI_DEVICE_ID_MELLANOX_CONNECTX4:
-+ tunnel_en = 1;
-+ mps = 0;
-+ break;
- case PCI_DEVICE_ID_MELLANOX_CONNECTX4LX:
- case PCI_DEVICE_ID_MELLANOX_CONNECTX5:
- case PCI_DEVICE_ID_MELLANOX_CONNECTX5VF:
- case PCI_DEVICE_ID_MELLANOX_CONNECTX5EX:
- case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF:
- mps = 1;
-+ tunnel_en = 1;
- break;
- default:
- mps = 0;
-@@ -539,6 +545,7 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
- priv->mtu = ETHER_MTU;
- priv->mps = mps; /* Enable MPW by default if supported. */
- priv->cqe_comp = 1; /* Enable compression by default. */
-+ priv->tunnel_en = tunnel_en;
- err = mlx5_args(priv, pci_dev->device.devargs);
- if (err) {
- ERROR("failed to process device arguments: %s",
-diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
-index 93f129b..870e01f 100644
---- a/drivers/net/mlx5/mlx5.h
-+++ b/drivers/net/mlx5/mlx5.h
-@@ -127,6 +127,8 @@ struct priv {
- unsigned int cqe_comp:1; /* Whether CQE compression is enabled. */
- unsigned int pending_alarm:1; /* An alarm is pending. */
- unsigned int tso:1; /* Whether TSO is supported. */
-+ unsigned int tunnel_en:1;
-+ /* Whether Tx offloads for tunneled packets are supported. */
- unsigned int max_tso_payload_sz; /* Maximum TCP payload for TSO. */
- unsigned int txq_inline; /* Maximum packet size for inlining. */
- unsigned int txqs_inline; /* Queue number threshold for inlining. */
-diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
-index 5542193..8be9e77 100644
---- a/drivers/net/mlx5/mlx5_ethdev.c
-+++ b/drivers/net/mlx5/mlx5_ethdev.c
-@@ -695,6 +695,8 @@ mlx5_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
- DEV_TX_OFFLOAD_TCP_CKSUM);
- if (priv->tso)
- info->tx_offload_capa |= DEV_TX_OFFLOAD_TCP_TSO;
-+ if (priv->tunnel_en)
-+ info->tx_offload_capa |= DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM;
- if (priv_get_ifname(priv, &ifname) == 0)
- info->if_index = if_nametoindex(ifname);
- /* FIXME: RETA update/query API expects the callee to know the size of
-diff --git a/drivers/net/mlx5/mlx5_prm.h b/drivers/net/mlx5/mlx5_prm.h
-index 3318668..0a77f5b 100644
---- a/drivers/net/mlx5/mlx5_prm.h
-+++ b/drivers/net/mlx5/mlx5_prm.h
-@@ -120,6 +120,12 @@
- /* Tunnel packet bit in the CQE. */
- #define MLX5_CQE_RX_TUNNEL_PACKET (1u << 0)
-
-+/* Inner L3 checksum offload (Tunneled packets only). */
-+#define MLX5_ETH_WQE_L3_INNER_CSUM (1u << 4)
-+
-+/* Inner L4 checksum offload (Tunneled packets only). */
-+#define MLX5_ETH_WQE_L4_INNER_CSUM (1u << 5)
-+
- /* INVALID is used by packets matching no flow rules. */
- #define MLX5_FLOW_MARK_INVALID 0
-
-diff --git a/drivers/net/mlx5/mlx5_rxtx.c b/drivers/net/mlx5/mlx5_rxtx.c
-index 98889f6..c2eb891 100644
---- a/drivers/net/mlx5/mlx5_rxtx.c
-+++ b/drivers/net/mlx5/mlx5_rxtx.c
-@@ -443,7 +443,19 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n)
- /* Should we enable HW CKSUM offload */
- if (buf->ol_flags &
- (PKT_TX_IP_CKSUM | PKT_TX_TCP_CKSUM | PKT_TX_UDP_CKSUM)) {
-- cs_flags = MLX5_ETH_WQE_L3_CSUM | MLX5_ETH_WQE_L4_CSUM;
-+ const uint64_t is_tunneled = buf->ol_flags &
-+ (PKT_TX_TUNNEL_GRE |
-+ PKT_TX_TUNNEL_VXLAN);
-+
-+ if (is_tunneled && txq->tunnel_en) {
-+ cs_flags = MLX5_ETH_WQE_L3_INNER_CSUM |
-+ MLX5_ETH_WQE_L4_INNER_CSUM;
-+ if (buf->ol_flags & PKT_TX_OUTER_IP_CKSUM)
-+ cs_flags |= MLX5_ETH_WQE_L3_CSUM;
-+ } else {
-+ cs_flags = MLX5_ETH_WQE_L3_CSUM |
-+ MLX5_ETH_WQE_L4_CSUM;
-+ }
- }
- raw = ((uint8_t *)(uintptr_t)wqe) + 2 * MLX5_WQE_DWORD_SIZE;
- /* Replace the Ethernet type by the VLAN if necessary. */
-diff --git a/drivers/net/mlx5/mlx5_rxtx.h b/drivers/net/mlx5/mlx5_rxtx.h
-index 6b328cf..9669564 100644
---- a/drivers/net/mlx5/mlx5_rxtx.h
-+++ b/drivers/net/mlx5/mlx5_rxtx.h
-@@ -256,6 +256,8 @@ struct txq {
- uint16_t max_inline; /* Multiple of RTE_CACHE_LINE_SIZE to inline. */
- uint16_t inline_en:1; /* When set inline is enabled. */
- uint16_t tso_en:1; /* When set hardware TSO is enabled. */
-+ uint16_t tunnel_en:1;
-+ /* When set TX offload for tunneled packets are supported. */
- uint32_t qp_num_8s; /* QP number shifted by 8. */
- volatile struct mlx5_cqe (*cqes)[]; /* Completion queue. */
- volatile void *wqes; /* Work queue (use volatile to write into). */
-diff --git a/drivers/net/mlx5/mlx5_txq.c b/drivers/net/mlx5/mlx5_txq.c
-index 995b763..9d0c00f 100644
---- a/drivers/net/mlx5/mlx5_txq.c
-+++ b/drivers/net/mlx5/mlx5_txq.c
-@@ -356,6 +356,8 @@ txq_ctrl_setup(struct rte_eth_dev *dev, struct txq_ctrl *txq_ctrl,
- max_tso_inline);
- tmpl.txq.tso_en = 1;
- }
-+ if (priv->tunnel_en)
-+ tmpl.txq.tunnel_en = 1;
- tmpl.qp = ibv_exp_create_qp(priv->ctx, &attr.init);
- if (tmpl.qp == NULL) {
- ret = (errno ? errno : EINVAL);
---
-2.7.4
-
diff --git a/dpdk/dpdk-17.02_patches/0008-net-mlx5-add-enhanced-multi-packet-send-for-ConnectX.patch b/dpdk/dpdk-17.02_patches/0008-net-mlx5-add-enhanced-multi-packet-send-for-ConnectX.patch
deleted file mode 100644
index 6ff076c..0000000
--- a/dpdk/dpdk-17.02_patches/0008-net-mlx5-add-enhanced-multi-packet-send-for-ConnectX.patch
+++ /dev/null
@@ -1,809 +0,0 @@
-From 7ca5c8de65acabe4cb60960adcfa9247efdd2a5c Mon Sep 17 00:00:00 2001
-From: Yongseok Koh <yskoh@mellanox.com>
-Date: Wed, 15 Mar 2017 16:55:44 -0700
-Subject: [PATCH] net/mlx5: add enhanced multi-packet send for ConnectX-5
-
-ConnectX-5 supports enhanced version of multi-packet send (MPS). An MPS Tx
-descriptor can carry multiple packets either by including pointers of
-packets or by inlining packets. Inlining packet data can be helpful to
-better utilize PCIe bandwidth. In addition, Enhanced MPS supports hybrid
-mode - mixing inlined packets and pointers in a descriptor. This feature is
-enabled by default if supported by HW.
-
-Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
----
- doc/guides/nics/mlx5.rst | 31 +++-
- drivers/net/mlx5/mlx5.c | 37 +++-
- drivers/net/mlx5/mlx5.h | 4 +-
- drivers/net/mlx5/mlx5_defs.h | 7 +
- drivers/net/mlx5/mlx5_ethdev.c | 6 +-
- drivers/net/mlx5/mlx5_prm.h | 20 ++
- drivers/net/mlx5/mlx5_rxtx.c | 410 +++++++++++++++++++++++++++++++++++++++++
- drivers/net/mlx5/mlx5_rxtx.h | 7 +-
- drivers/net/mlx5/mlx5_txq.c | 29 ++-
- 9 files changed, 534 insertions(+), 17 deletions(-)
-
-diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
-index 41f3a47..0783aeb 100644
---- a/doc/guides/nics/mlx5.rst
-+++ b/doc/guides/nics/mlx5.rst
-@@ -183,10 +183,17 @@ Run-time configuration
-
- - ``txq_mpw_en`` parameter [int]
-
-- A nonzero value enables multi-packet send. This feature allows the TX
-- burst function to pack up to five packets in two descriptors in order to
-- save PCI bandwidth and improve performance at the cost of a slightly
-- higher CPU usage.
-+ A nonzero value enables multi-packet send (MPS) for ConnectX-4 Lx and
-+ enhanced multi-packet send (Enhanced MPS) for ConnectX-5. MPS allows the
-+ TX burst function to pack up multiple packets in a single descriptor
-+ session in order to save PCI bandwidth and improve performance at the
-+ cost of a slightly higher CPU usage. When ``txq_inline`` is set along
-+ with ``txq_mpw_en``, TX burst function tries to copy entire packet data
-+ on to TX descriptor instead of including pointer of packet only if there
-+ is enough room remained in the descriptor. ``txq_inline`` sets
-+ per-descriptor space for either pointers or inlined packets. In addition,
-+ Enhanced MPS supports hybrid mode - mixing inlined packets and pointers
-+ in the same descriptor.
-
- This option cannot be used in conjunction with ``tso`` below. When ``tso``
- is set, ``txq_mpw_en`` is disabled.
-@@ -194,6 +201,22 @@ Run-time configuration
- It is currently only supported on the ConnectX-4 Lx and ConnectX-5
- families of adapters. Enabled by default.
-
-+- ``txq_mpw_hdr_dseg_en`` parameter [int]
-+
-+ A nonzero value enables including two pointers in the first block of TX
-+ descriptor. This can be used to lessen CPU load for memory copy.
-+
-+ Effective only when Enhanced MPS is supported. Disabled by default.
-+
-+- ``txq_max_inline_len`` parameter [int]
-+
-+ Maximum size of packet to be inlined. This limits the size of packet to
-+ be inlined. If the size of a packet is larger than configured value, the
-+ packet isn't inlined even though there's enough space remained in the
-+ descriptor. Instead, the packet is included with pointer.
-+
-+ Effective only when Enhanced MPS is supported. The default value is 256.
-+
- - ``tso`` parameter [int]
-
- A nonzero value enables hardware TSO.
-diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
-index ebc7984..bc6a34f 100644
---- a/drivers/net/mlx5/mlx5.c
-+++ b/drivers/net/mlx5/mlx5.c
-@@ -84,6 +84,12 @@
- /* Device parameter to enable multi-packet send WQEs. */
- #define MLX5_TXQ_MPW_EN "txq_mpw_en"
-
-+/* Device parameter to include 2 dsegs in the title WQEBB. */
-+#define MLX5_TXQ_MPW_HDR_DSEG_EN "txq_mpw_hdr_dseg_en"
-+
-+/* Device parameter to limit the size of inlining packet. */
-+#define MLX5_TXQ_MAX_INLINE_LEN "txq_max_inline_len"
-+
- /* Device parameter to enable hardware TSO offload. */
- #define MLX5_TSO "tso"
-
-@@ -294,7 +300,11 @@ mlx5_args_check(const char *key, const char *val, void *opaque)
- } else if (strcmp(MLX5_TXQS_MIN_INLINE, key) == 0) {
- priv->txqs_inline = tmp;
- } else if (strcmp(MLX5_TXQ_MPW_EN, key) == 0) {
-- priv->mps &= !!tmp; /* Enable MPW only if HW supports */
-+ priv->mps = !!tmp ? priv->mps : MLX5_MPW_DISABLED;
-+ } else if (strcmp(MLX5_TXQ_MPW_HDR_DSEG_EN, key) == 0) {
-+ priv->mpw_hdr_dseg = !!tmp;
-+ } else if (strcmp(MLX5_TXQ_MAX_INLINE_LEN, key) == 0) {
-+ priv->inline_max_packet_sz = tmp;
- } else if (strcmp(MLX5_TSO, key) == 0) {
- priv->tso = !!tmp;
- } else {
-@@ -323,6 +333,8 @@ mlx5_args(struct priv *priv, struct rte_devargs *devargs)
- MLX5_TXQ_INLINE,
- MLX5_TXQS_MIN_INLINE,
- MLX5_TXQ_MPW_EN,
-+ MLX5_TXQ_MPW_HDR_DSEG_EN,
-+ MLX5_TXQ_MAX_INLINE_LEN,
- MLX5_TSO,
- NULL,
- };
-@@ -434,24 +446,27 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
- switch (pci_dev->id.device_id) {
- case PCI_DEVICE_ID_MELLANOX_CONNECTX4:
- tunnel_en = 1;
-- mps = 0;
-+ mps = MLX5_MPW_DISABLED;
- break;
- case PCI_DEVICE_ID_MELLANOX_CONNECTX4LX:
-+ mps = MLX5_MPW;
-+ break;
- case PCI_DEVICE_ID_MELLANOX_CONNECTX5:
- case PCI_DEVICE_ID_MELLANOX_CONNECTX5VF:
- case PCI_DEVICE_ID_MELLANOX_CONNECTX5EX:
- case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF:
-- mps = 1;
- tunnel_en = 1;
-+ mps = MLX5_MPW_ENHANCED;
- break;
- default:
-- mps = 0;
-+ mps = MLX5_MPW_DISABLED;
- }
- INFO("PCI information matches, using device \"%s\""
-- " (SR-IOV: %s, MPS: %s)",
-+ " (SR-IOV: %s, %sMPS: %s)",
- list[i]->name,
- sriov ? "true" : "false",
-- mps ? "true" : "false");
-+ mps == MLX5_MPW_ENHANCED ? "Enhanced " : "",
-+ mps != MLX5_MPW_DISABLED ? "true" : "false");
- attr_ctx = ibv_open_device(list[i]);
- err = errno;
- break;
-@@ -546,6 +561,13 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
- priv->pd = pd;
- priv->mtu = ETHER_MTU;
- priv->mps = mps; /* Enable MPW by default if supported. */
-+ /* Set default values for Enhanced MPW, a.k.a MPWv2. */
-+ if (mps == MLX5_MPW_ENHANCED) {
-+ priv->mpw_hdr_dseg = 0;
-+ priv->txqs_inline = MLX5_EMPW_MIN_TXQS;
-+ priv->inline_max_packet_sz = MLX5_EMPW_MAX_INLINE_LEN;
-+ priv->txq_inline = MLX5_WQE_SIZE_MAX - MLX5_WQE_SIZE;
-+ }
- priv->cqe_comp = 1; /* Enable compression by default. */
- priv->tunnel_en = tunnel_en;
- err = mlx5_args(priv, pci_dev->device.devargs);
-@@ -613,6 +635,9 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
- "with TSO. MPS disabled");
- priv->mps = 0;
- }
-+ INFO("%sMPS is %s",
-+ priv->mps == MLX5_MPW_ENHANCED ? "Enhanced " : "",
-+ priv->mps != MLX5_MPW_DISABLED ? "enabled" : "disabled");
- /* Allocate and register default RSS hash keys. */
- priv->rss_conf = rte_calloc(__func__, hash_rxq_init_n,
- sizeof((*priv->rss_conf)[0]), 0);
-diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
-index 870e01f..d26d465 100644
---- a/drivers/net/mlx5/mlx5.h
-+++ b/drivers/net/mlx5/mlx5.h
-@@ -123,7 +123,8 @@ struct priv {
- unsigned int hw_fcs_strip:1; /* FCS stripping is supported. */
- unsigned int hw_padding:1; /* End alignment padding is supported. */
- unsigned int sriov:1; /* This is a VF or PF with VF devices. */
-- unsigned int mps:1; /* Whether multi-packet send is supported. */
-+ unsigned int mps:2; /* Multi-packet send mode (0: disabled). */
-+ unsigned int mpw_hdr_dseg:1; /* Enable DSEGs in the title WQEBB. */
- unsigned int cqe_comp:1; /* Whether CQE compression is enabled. */
- unsigned int pending_alarm:1; /* An alarm is pending. */
- unsigned int tso:1; /* Whether TSO is supported. */
-@@ -132,6 +133,7 @@ struct priv {
- unsigned int max_tso_payload_sz; /* Maximum TCP payload for TSO. */
- unsigned int txq_inline; /* Maximum packet size for inlining. */
- unsigned int txqs_inline; /* Queue number threshold for inlining. */
-+ unsigned int inline_max_packet_sz; /* Max packet size for inlining. */
- /* RX/TX queues. */
- unsigned int rxqs_n; /* RX queues array size. */
- unsigned int txqs_n; /* TX queues array size. */
-diff --git a/drivers/net/mlx5/mlx5_defs.h b/drivers/net/mlx5/mlx5_defs.h
-index eecb908..201bb33 100644
---- a/drivers/net/mlx5/mlx5_defs.h
-+++ b/drivers/net/mlx5/mlx5_defs.h
-@@ -55,6 +55,13 @@
- #define MLX5_TX_COMP_THRESH 32
-
- /*
-+ * Request TX completion every time the total number of WQEBBs used for inlining
-+ * packets exceeds the size of WQ divided by this divisor. Better to be power of
-+ * two for performance.
-+ */
-+#define MLX5_TX_COMP_THRESH_INLINE_DIV (1 << 3)
-+
-+/*
- * Maximum number of cached Memory Pools (MPs) per TX queue. Each RTE MP
- * from which buffers are to be transmitted will have to be mapped by this
- * driver to their own Memory Region (MR). This is a slow operation.
-diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
-index 5deb6e8..dd5fe5c 100644
---- a/drivers/net/mlx5/mlx5_ethdev.c
-+++ b/drivers/net/mlx5/mlx5_ethdev.c
-@@ -1590,7 +1590,11 @@ priv_select_tx_function(struct priv *priv)
- {
- priv->dev->tx_pkt_burst = mlx5_tx_burst;
- /* Select appropriate TX function. */
-- if (priv->mps && priv->txq_inline) {
-+ if (priv->mps == MLX5_MPW_ENHANCED) {
-+ priv->dev->tx_pkt_burst =
-+ mlx5_tx_burst_empw;
-+ DEBUG("selected Enhanced MPW TX function");
-+ } else if (priv->mps && priv->txq_inline) {
- priv->dev->tx_pkt_burst = mlx5_tx_burst_mpw_inline;
- DEBUG("selected MPW inline TX function");
- } else if (priv->mps) {
-diff --git a/drivers/net/mlx5/mlx5_prm.h b/drivers/net/mlx5/mlx5_prm.h
-index 0a77f5b..155bdba 100644
---- a/drivers/net/mlx5/mlx5_prm.h
-+++ b/drivers/net/mlx5/mlx5_prm.h
-@@ -73,6 +73,9 @@
- /* WQE size */
- #define MLX5_WQE_SIZE (4 * MLX5_WQE_DWORD_SIZE)
-
-+/* Max size of a WQE session. */
-+#define MLX5_WQE_SIZE_MAX 960U
-+
- /* Compute the number of DS. */
- #define MLX5_WQE_DS(n) \
- (((n) + MLX5_WQE_DWORD_SIZE - 1) / MLX5_WQE_DWORD_SIZE)
-@@ -80,10 +83,19 @@
- /* Room for inline data in multi-packet WQE. */
- #define MLX5_MWQE64_INL_DATA 28
-
-+/* Default minimum number of Tx queues for inlining packets. */
-+#define MLX5_EMPW_MIN_TXQS 8
-+
-+/* Default max packet length to be inlined. */
-+#define MLX5_EMPW_MAX_INLINE_LEN (4U * MLX5_WQE_SIZE)
-+
- #ifndef HAVE_VERBS_MLX5_OPCODE_TSO
- #define MLX5_OPCODE_TSO MLX5_OPCODE_LSO_MPW /* Compat with OFED 3.3. */
- #endif
-
-+#define MLX5_OPC_MOD_ENHANCED_MPSW 0
-+#define MLX5_OPCODE_ENHANCED_MPSW 0x29
-+
- /* CQE value to inform that VLAN is stripped. */
- #define MLX5_CQE_VLAN_STRIPPED (1u << 0)
-
-@@ -176,10 +188,18 @@ struct mlx5_wqe64 {
- uint8_t raw[32];
- } __rte_aligned(MLX5_WQE_SIZE);
-
-+/* MPW mode. */
-+enum mlx5_mpw_mode {
-+ MLX5_MPW_DISABLED,
-+ MLX5_MPW,
-+ MLX5_MPW_ENHANCED, /* Enhanced Multi-Packet Send WQE, a.k.a MPWv2. */
-+};
-+
- /* MPW session status. */
- enum mlx5_mpw_state {
- MLX5_MPW_STATE_OPENED,
- MLX5_MPW_INL_STATE_OPENED,
-+ MLX5_MPW_ENHANCED_STATE_OPENED,
- MLX5_MPW_STATE_CLOSED,
- };
-
-diff --git a/drivers/net/mlx5/mlx5_rxtx.c b/drivers/net/mlx5/mlx5_rxtx.c
-index 9fc433e..a1dd84a 100644
---- a/drivers/net/mlx5/mlx5_rxtx.c
-+++ b/drivers/net/mlx5/mlx5_rxtx.c
-@@ -195,6 +195,62 @@ tx_mlx5_wqe(struct txq *txq, uint16_t ci)
- }
-
- /**
-+ * Return the size of tailroom of WQ.
-+ *
-+ * @param txq
-+ * Pointer to TX queue structure.
-+ * @param addr
-+ * Pointer to tail of WQ.
-+ *
-+ * @return
-+ * Size of tailroom.
-+ */
-+static inline size_t
-+tx_mlx5_wq_tailroom(struct txq *txq, void *addr)
-+{
-+ size_t tailroom;
-+ tailroom = (uintptr_t)(txq->wqes) +
-+ (1 << txq->wqe_n) * MLX5_WQE_SIZE -
-+ (uintptr_t)addr;
-+ return tailroom;
-+}
-+
-+/**
-+ * Copy data to tailroom of circular queue.
-+ *
-+ * @param dst
-+ * Pointer to destination.
-+ * @param src
-+ * Pointer to source.
-+ * @param n
-+ * Number of bytes to copy.
-+ * @param base
-+ * Pointer to head of queue.
-+ * @param tailroom
-+ * Size of tailroom from dst.
-+ *
-+ * @return
-+ * Pointer after copied data.
-+ */
-+static inline void *
-+mlx5_copy_to_wq(void *dst, const void *src, size_t n,
-+ void *base, size_t tailroom)
-+{
-+ void *ret;
-+
-+ if (n > tailroom) {
-+ rte_memcpy(dst, src, tailroom);
-+ rte_memcpy(base, (void *)((uintptr_t)src + tailroom),
-+ n - tailroom);
-+ ret = (uint8_t *)base + n - tailroom;
-+ } else {
-+ rte_memcpy(dst, src, n);
-+ ret = (n == tailroom) ? base : (uint8_t *)dst + n;
-+ }
-+ return ret;
-+}
-+
-+/**
- * Manage TX completions.
- *
- * When sending a burst, mlx5_tx_burst() posts several WRs.
-@@ -1269,6 +1325,360 @@ mlx5_tx_burst_mpw_inline(void *dpdk_txq, struct rte_mbuf **pkts,
- }
-
- /**
-+ * Open an Enhanced MPW session.
-+ *
-+ * @param txq
-+ * Pointer to TX queue structure.
-+ * @param mpw
-+ * Pointer to MPW session structure.
-+ * @param length
-+ * Packet length.
-+ */
-+static inline void
-+mlx5_empw_new(struct txq *txq, struct mlx5_mpw *mpw, int padding)
-+{
-+ uint16_t idx = txq->wqe_ci & ((1 << txq->wqe_n) - 1);
-+
-+ mpw->state = MLX5_MPW_ENHANCED_STATE_OPENED;
-+ mpw->pkts_n = 0;
-+ mpw->total_len = sizeof(struct mlx5_wqe);
-+ mpw->wqe = (volatile struct mlx5_wqe *)tx_mlx5_wqe(txq, idx);
-+ mpw->wqe->ctrl[0] = htonl((MLX5_OPC_MOD_ENHANCED_MPSW << 24) |
-+ (txq->wqe_ci << 8) |
-+ MLX5_OPCODE_ENHANCED_MPSW);
-+ mpw->wqe->ctrl[2] = 0;
-+ mpw->wqe->ctrl[3] = 0;
-+ memset((void *)(uintptr_t)&mpw->wqe->eseg, 0, MLX5_WQE_DWORD_SIZE);
-+ if (unlikely(padding)) {
-+ uintptr_t addr = (uintptr_t)(mpw->wqe + 1);
-+
-+ /* Pad the first 2 DWORDs with zero-length inline header. */
-+ *(volatile uint32_t *)addr = htonl(MLX5_INLINE_SEG);
-+ *(volatile uint32_t *)(addr + MLX5_WQE_DWORD_SIZE) =
-+ htonl(MLX5_INLINE_SEG);
-+ mpw->total_len += 2 * MLX5_WQE_DWORD_SIZE;
-+ /* Start from the next WQEBB. */
-+ mpw->data.raw = (volatile void *)(tx_mlx5_wqe(txq, idx + 1));
-+ } else {
-+ mpw->data.raw = (volatile void *)(mpw->wqe + 1);
-+ }
-+}
-+
-+/**
-+ * Close an Enhanced MPW session.
-+ *
-+ * @param txq
-+ * Pointer to TX queue structure.
-+ * @param mpw
-+ * Pointer to MPW session structure.
-+ *
-+ * @return
-+ * Number of consumed WQEs.
-+ */
-+static inline uint16_t
-+mlx5_empw_close(struct txq *txq, struct mlx5_mpw *mpw)
-+{
-+ uint16_t ret;
-+
-+ /* Store size in multiple of 16 bytes. Control and Ethernet segments
-+ * count as 2.
-+ */
-+ mpw->wqe->ctrl[1] = htonl(txq->qp_num_8s | MLX5_WQE_DS(mpw->total_len));
-+ mpw->state = MLX5_MPW_STATE_CLOSED;
-+ ret = (mpw->total_len + (MLX5_WQE_SIZE - 1)) / MLX5_WQE_SIZE;
-+ txq->wqe_ci += ret;
-+ return ret;
-+}
-+
-+/**
-+ * DPDK callback for TX with Enhanced MPW support.
-+ *
-+ * @param dpdk_txq
-+ * Generic pointer to TX queue structure.
-+ * @param[in] pkts
-+ * Packets to transmit.
-+ * @param pkts_n
-+ * Number of packets in array.
-+ *
-+ * @return
-+ * Number of packets successfully transmitted (<= pkts_n).
-+ */
-+uint16_t
-+mlx5_tx_burst_empw(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n)
-+{
-+ struct txq *txq = (struct txq *)dpdk_txq;
-+ uint16_t elts_head = txq->elts_head;
-+ const unsigned int elts_n = 1 << txq->elts_n;
-+ unsigned int i = 0;
-+ unsigned int j = 0;
-+ unsigned int max_elts;
-+ uint16_t max_wqe;
-+ unsigned int max_inline = txq->max_inline * RTE_CACHE_LINE_SIZE;
-+ unsigned int mpw_room = 0;
-+ unsigned int inl_pad = 0;
-+ uint32_t inl_hdr;
-+ struct mlx5_mpw mpw = {
-+ .state = MLX5_MPW_STATE_CLOSED,
-+ };
-+
-+ if (unlikely(!pkts_n))
-+ return 0;
-+ /* Start processing. */
-+ txq_complete(txq);
-+ max_elts = (elts_n - (elts_head - txq->elts_tail));
-+ if (max_elts > elts_n)
-+ max_elts -= elts_n;
-+ /* A CQE slot must always be available. */
-+ assert((1u << txq->cqe_n) - (txq->cq_pi - txq->cq_ci));
-+ max_wqe = (1u << txq->wqe_n) - (txq->wqe_ci - txq->wqe_pi);
-+ if (unlikely(!max_wqe))
-+ return 0;
-+ do {
-+ struct rte_mbuf *buf = *(pkts++);
-+ unsigned int elts_head_next;
-+ uintptr_t addr;
-+ uint64_t naddr;
-+ unsigned int n;
-+ unsigned int do_inline = 0; /* Whether inline is possible. */
-+ uint32_t length;
-+ unsigned int segs_n = buf->nb_segs;
-+ uint32_t cs_flags = 0;
-+
-+ /*
-+ * Make sure there is enough room to store this packet and
-+ * that one ring entry remains unused.
-+ */
-+ assert(segs_n);
-+ if (max_elts - j < segs_n + 1)
-+ break;
-+ /* Do not bother with large packets MPW cannot handle. */
-+ if (segs_n > MLX5_MPW_DSEG_MAX)
-+ break;
-+ /* Should we enable HW CKSUM offload. */
-+ if (buf->ol_flags &
-+ (PKT_TX_IP_CKSUM | PKT_TX_TCP_CKSUM | PKT_TX_UDP_CKSUM))
-+ cs_flags = MLX5_ETH_WQE_L3_CSUM | MLX5_ETH_WQE_L4_CSUM;
-+ /* Retrieve packet information. */
-+ length = PKT_LEN(buf);
-+ /* Start new session if:
-+ * - multi-segment packet
-+ * - no space left even for a dseg
-+ * - next packet can be inlined with a new WQE
-+ * - cs_flag differs
-+ * It can't be MLX5_MPW_STATE_OPENED as always have a single
-+ * segmented packet.
-+ */
-+ if (mpw.state == MLX5_MPW_ENHANCED_STATE_OPENED) {
-+ if ((segs_n != 1) ||
-+ (inl_pad + sizeof(struct mlx5_wqe_data_seg) >
-+ mpw_room) ||
-+ (length <= txq->inline_max_packet_sz &&
-+ inl_pad + sizeof(inl_hdr) + length >
-+ mpw_room) ||
-+ (mpw.wqe->eseg.cs_flags != cs_flags))
-+ max_wqe -= mlx5_empw_close(txq, &mpw);
-+ }
-+ if (unlikely(mpw.state == MLX5_MPW_STATE_CLOSED)) {
-+ if (unlikely(segs_n != 1)) {
-+ /* Fall back to legacy MPW.
-+ * A MPW session consumes 2 WQEs at most to
-+ * include MLX5_MPW_DSEG_MAX pointers.
-+ */
-+ if (unlikely(max_wqe < 2))
-+ break;
-+ mlx5_mpw_new(txq, &mpw, length);
-+ } else {
-+ /* In Enhanced MPW, inline as much as the budget
-+ * is allowed. The remaining space is to be
-+ * filled with dsegs. If the title WQEBB isn't
-+ * padded, it will have 2 dsegs there.
-+ */
-+ mpw_room = RTE_MIN(MLX5_WQE_SIZE_MAX,
-+ (max_inline ? max_inline :
-+ pkts_n * MLX5_WQE_DWORD_SIZE) +
-+ MLX5_WQE_SIZE);
-+ if (unlikely(max_wqe * MLX5_WQE_SIZE <
-+ mpw_room))
-+ break;
-+ /* Don't pad the title WQEBB to not waste WQ. */
-+ mlx5_empw_new(txq, &mpw, 0);
-+ mpw_room -= mpw.total_len;
-+ inl_pad = 0;
-+ do_inline =
-+ length <= txq->inline_max_packet_sz &&
-+ sizeof(inl_hdr) + length <= mpw_room &&
-+ !txq->mpw_hdr_dseg;
-+ }
-+ mpw.wqe->eseg.cs_flags = cs_flags;
-+ } else {
-+ /* Evaluate whether the next packet can be inlined.
-+ * Inlininig is possible when:
-+ * - length is less than configured value
-+ * - length fits for remaining space
-+ * - not required to fill the title WQEBB with dsegs
-+ */
-+ do_inline =
-+ length <= txq->inline_max_packet_sz &&
-+ inl_pad + sizeof(inl_hdr) + length <=
-+ mpw_room &&
-+ (!txq->mpw_hdr_dseg ||
-+ mpw.total_len >= MLX5_WQE_SIZE);
-+ }
-+ /* Multi-segment packets must be alone in their MPW. */
-+ assert((segs_n == 1) || (mpw.pkts_n == 0));
-+ if (unlikely(mpw.state == MLX5_MPW_STATE_OPENED)) {
-+#if defined(MLX5_PMD_SOFT_COUNTERS) || !defined(NDEBUG)
-+ length = 0;
-+#endif
-+ do {
-+ volatile struct mlx5_wqe_data_seg *dseg;
-+
-+ elts_head_next =
-+ (elts_head + 1) & (elts_n - 1);
-+ assert(buf);
-+ (*txq->elts)[elts_head] = buf;
-+ dseg = mpw.data.dseg[mpw.pkts_n];
-+ addr = rte_pktmbuf_mtod(buf, uintptr_t);
-+ *dseg = (struct mlx5_wqe_data_seg){
-+ .byte_count = htonl(DATA_LEN(buf)),
-+ .lkey = txq_mp2mr(txq, txq_mb2mp(buf)),
-+ .addr = htonll(addr),
-+ };
-+ elts_head = elts_head_next;
-+#if defined(MLX5_PMD_SOFT_COUNTERS) || !defined(NDEBUG)
-+ length += DATA_LEN(buf);
-+#endif
-+ buf = buf->next;
-+ ++j;
-+ ++mpw.pkts_n;
-+ } while (--segs_n);
-+ /* A multi-segmented packet takes one MPW session.
-+ * TODO: Pack more multi-segmented packets if possible.
-+ */
-+ mlx5_mpw_close(txq, &mpw);
-+ if (mpw.pkts_n < 3)
-+ max_wqe--;
-+ else
-+ max_wqe -= 2;
-+ } else if (do_inline) {
-+ /* Inline packet into WQE. */
-+ unsigned int max;
-+
-+ assert(mpw.state == MLX5_MPW_ENHANCED_STATE_OPENED);
-+ assert(length == DATA_LEN(buf));
-+ inl_hdr = htonl(length | MLX5_INLINE_SEG);
-+ addr = rte_pktmbuf_mtod(buf, uintptr_t);
-+ mpw.data.raw = (volatile void *)
-+ ((uintptr_t)mpw.data.raw + inl_pad);
-+ max = tx_mlx5_wq_tailroom(txq,
-+ (void *)(uintptr_t)mpw.data.raw);
-+ /* Copy inline header. */
-+ mpw.data.raw = (volatile void *)
-+ mlx5_copy_to_wq(
-+ (void *)(uintptr_t)mpw.data.raw,
-+ &inl_hdr,
-+ sizeof(inl_hdr),
-+ (void *)(uintptr_t)txq->wqes,
-+ max);
-+ max = tx_mlx5_wq_tailroom(txq,
-+ (void *)(uintptr_t)mpw.data.raw);
-+ /* Copy packet data. */
-+ mpw.data.raw = (volatile void *)
-+ mlx5_copy_to_wq(
-+ (void *)(uintptr_t)mpw.data.raw,
-+ (void *)addr,
-+ length,
-+ (void *)(uintptr_t)txq->wqes,
-+ max);
-+ ++mpw.pkts_n;
-+ mpw.total_len += (inl_pad + sizeof(inl_hdr) + length);
-+ /* No need to get completion as the entire packet is
-+ * copied to WQ. Free the buf right away.
-+ */
-+ elts_head_next = elts_head;
-+ rte_pktmbuf_free_seg(buf);
-+ mpw_room -= (inl_pad + sizeof(inl_hdr) + length);
-+ /* Add pad in the next packet if any. */
-+ inl_pad = (((uintptr_t)mpw.data.raw +
-+ (MLX5_WQE_DWORD_SIZE - 1)) &
-+ ~(MLX5_WQE_DWORD_SIZE - 1)) -
-+ (uintptr_t)mpw.data.raw;
-+ } else {
-+ /* No inline. Load a dseg of packet pointer. */
-+ volatile rte_v128u32_t *dseg;
-+
-+ assert(mpw.state == MLX5_MPW_ENHANCED_STATE_OPENED);
-+ assert((inl_pad + sizeof(*dseg)) <= mpw_room);
-+ assert(length == DATA_LEN(buf));
-+ if (!tx_mlx5_wq_tailroom(txq,
-+ (void *)((uintptr_t)mpw.data.raw
-+ + inl_pad)))
-+ dseg = (volatile void *)txq->wqes;
-+ else
-+ dseg = (volatile void *)
-+ ((uintptr_t)mpw.data.raw +
-+ inl_pad);
-+ elts_head_next = (elts_head + 1) & (elts_n - 1);
-+ (*txq->elts)[elts_head] = buf;
-+ addr = rte_pktmbuf_mtod(buf, uintptr_t);
-+ for (n = 0; n * RTE_CACHE_LINE_SIZE < length; n++)
-+ rte_prefetch2((void *)(addr +
-+ n * RTE_CACHE_LINE_SIZE));
-+ naddr = htonll(addr);
-+ *dseg = (rte_v128u32_t) {
-+ htonl(length),
-+ txq_mp2mr(txq, txq_mb2mp(buf)),
-+ naddr,
-+ naddr >> 32,
-+ };
-+ mpw.data.raw = (volatile void *)(dseg + 1);
-+ mpw.total_len += (inl_pad + sizeof(*dseg));
-+ ++j;
-+ ++mpw.pkts_n;
-+ mpw_room -= (inl_pad + sizeof(*dseg));
-+ inl_pad = 0;
-+ }
-+ elts_head = elts_head_next;
-+#ifdef MLX5_PMD_SOFT_COUNTERS
-+ /* Increment sent bytes counter. */
-+ txq->stats.obytes += length;
-+#endif
-+ ++i;
-+ } while (i < pkts_n);
-+ /* Take a shortcut if nothing must be sent. */
-+ if (unlikely(i == 0))
-+ return 0;
-+ /* Check whether completion threshold has been reached. */
-+ if (txq->elts_comp + j >= MLX5_TX_COMP_THRESH ||
-+ (uint16_t)(txq->wqe_ci - txq->mpw_comp) >=
-+ (1 << txq->wqe_n) / MLX5_TX_COMP_THRESH_INLINE_DIV) {
-+ volatile struct mlx5_wqe *wqe = mpw.wqe;
-+
-+ /* Request completion on last WQE. */
-+ wqe->ctrl[2] = htonl(8);
-+ /* Save elts_head in unused "immediate" field of WQE. */
-+ wqe->ctrl[3] = elts_head;
-+ txq->elts_comp = 0;
-+ txq->mpw_comp = txq->wqe_ci;
-+ txq->cq_pi++;
-+ } else {
-+ txq->elts_comp += j;
-+ }
-+#ifdef MLX5_PMD_SOFT_COUNTERS
-+ /* Increment sent packets counter. */
-+ txq->stats.opackets += i;
-+#endif
-+ if (mpw.state == MLX5_MPW_ENHANCED_STATE_OPENED)
-+ mlx5_empw_close(txq, &mpw);
-+ else if (mpw.state == MLX5_MPW_STATE_OPENED)
-+ mlx5_mpw_close(txq, &mpw);
-+ /* Ring QP doorbell. */
-+ mlx5_tx_dbrec(txq, mpw.wqe);
-+ txq->elts_head = elts_head;
-+ return i;
-+}
-+
-+/**
- * Translate RX completion flags to packet type.
- *
- * @param[in] cqe
-diff --git a/drivers/net/mlx5/mlx5_rxtx.h b/drivers/net/mlx5/mlx5_rxtx.h
-index 0db810c..4a4bd84 100644
---- a/drivers/net/mlx5/mlx5_rxtx.h
-+++ b/drivers/net/mlx5/mlx5_rxtx.h
-@@ -248,17 +248,21 @@ struct txq {
- uint16_t elts_head; /* Current index in (*elts)[]. */
- uint16_t elts_tail; /* First element awaiting completion. */
- uint16_t elts_comp; /* Counter since last completion request. */
-+ uint16_t mpw_comp; /* WQ index since last completion request. */
- uint16_t cq_ci; /* Consumer index for completion queue. */
-+ uint16_t cq_pi; /* Producer index for completion queue. */
- uint16_t wqe_ci; /* Consumer index for work queue. */
- uint16_t wqe_pi; /* Producer index for work queue. */
- uint16_t elts_n:4; /* (*elts)[] length (in log2). */
- uint16_t cqe_n:4; /* Number of CQ elements (in log2). */
- uint16_t wqe_n:4; /* Number of of WQ elements (in log2). */
-- uint16_t max_inline; /* Multiple of RTE_CACHE_LINE_SIZE to inline. */
- uint16_t inline_en:1; /* When set inline is enabled. */
- uint16_t tso_en:1; /* When set hardware TSO is enabled. */
- uint16_t tunnel_en:1;
- /* When set TX offload for tunneled packets are supported. */
-+ uint16_t mpw_hdr_dseg:1; /* Enable DSEGs in the title WQEBB. */
-+ uint16_t max_inline; /* Multiple of RTE_CACHE_LINE_SIZE to inline. */
-+ uint16_t inline_max_packet_sz; /* Max packet size for inlining. */
- uint32_t qp_num_8s; /* QP number shifted by 8. */
- volatile struct mlx5_cqe (*cqes)[]; /* Completion queue. */
- volatile void *wqes; /* Work queue (use volatile to write into). */
-@@ -329,6 +333,7 @@ uint16_t mlx5_tx_burst_secondary_setup(void *, struct rte_mbuf **, uint16_t);
- uint16_t mlx5_tx_burst(void *, struct rte_mbuf **, uint16_t);
- uint16_t mlx5_tx_burst_mpw(void *, struct rte_mbuf **, uint16_t);
- uint16_t mlx5_tx_burst_mpw_inline(void *, struct rte_mbuf **, uint16_t);
-+uint16_t mlx5_tx_burst_empw(void *, struct rte_mbuf **, uint16_t);
- uint16_t mlx5_rx_burst(void *, struct rte_mbuf **, uint16_t);
- uint16_t removed_tx_burst(void *, struct rte_mbuf **, uint16_t);
- uint16_t removed_rx_burst(void *, struct rte_mbuf **, uint16_t);
-diff --git a/drivers/net/mlx5/mlx5_txq.c b/drivers/net/mlx5/mlx5_txq.c
-index 9d0c00f..bbfce75 100644
---- a/drivers/net/mlx5/mlx5_txq.c
-+++ b/drivers/net/mlx5/mlx5_txq.c
-@@ -266,6 +266,7 @@ txq_ctrl_setup(struct rte_eth_dev *dev, struct txq_ctrl *txq_ctrl,
- struct ibv_exp_cq_attr cq_attr;
- } attr;
- enum ibv_exp_query_intf_status status;
-+ unsigned int cqe_n;
- int ret = 0;
-
- if (mlx5_getenv_int("MLX5_ENABLE_CQE_COMPRESSION")) {
-@@ -276,6 +277,8 @@ txq_ctrl_setup(struct rte_eth_dev *dev, struct txq_ctrl *txq_ctrl,
- (void)conf; /* Thresholds configuration (ignored). */
- assert(desc > MLX5_TX_COMP_THRESH);
- tmpl.txq.elts_n = log2above(desc);
-+ if (priv->mps == MLX5_MPW_ENHANCED)
-+ tmpl.txq.mpw_hdr_dseg = priv->mpw_hdr_dseg;
- /* MRs will be registered in mp2mr[] later. */
- attr.rd = (struct ibv_exp_res_domain_init_attr){
- .comp_mask = (IBV_EXP_RES_DOMAIN_THREAD_MODEL |
-@@ -294,9 +297,12 @@ txq_ctrl_setup(struct rte_eth_dev *dev, struct txq_ctrl *txq_ctrl,
- .comp_mask = IBV_EXP_CQ_INIT_ATTR_RES_DOMAIN,
- .res_domain = tmpl.rd,
- };
-+ cqe_n = ((desc / MLX5_TX_COMP_THRESH) - 1) ?
-+ ((desc / MLX5_TX_COMP_THRESH) - 1) : 1;
-+ if (priv->mps == MLX5_MPW_ENHANCED)
-+ cqe_n += MLX5_TX_COMP_THRESH_INLINE_DIV;
- tmpl.cq = ibv_exp_create_cq(priv->ctx,
-- (((desc / MLX5_TX_COMP_THRESH) - 1) ?
-- ((desc / MLX5_TX_COMP_THRESH) - 1) : 1),
-+ cqe_n,
- NULL, NULL, 0, &attr.cq);
- if (tmpl.cq == NULL) {
- ret = ENOMEM;
-@@ -340,9 +346,24 @@ txq_ctrl_setup(struct rte_eth_dev *dev, struct txq_ctrl *txq_ctrl,
- tmpl.txq.max_inline =
- ((priv->txq_inline + (RTE_CACHE_LINE_SIZE - 1)) /
- RTE_CACHE_LINE_SIZE);
-- attr.init.cap.max_inline_data =
-- tmpl.txq.max_inline * RTE_CACHE_LINE_SIZE;
- tmpl.txq.inline_en = 1;
-+ /* TSO and MPS can't be enabled concurrently. */
-+ assert(!priv->tso || !priv->mps);
-+ if (priv->mps == MLX5_MPW_ENHANCED) {
-+ tmpl.txq.inline_max_packet_sz =
-+ priv->inline_max_packet_sz;
-+ /* To minimize the size of data set, avoid requesting
-+ * too large WQ.
-+ */
-+ attr.init.cap.max_inline_data =
-+ ((RTE_MIN(priv->txq_inline,
-+ priv->inline_max_packet_sz) +
-+ (RTE_CACHE_LINE_SIZE - 1)) /
-+ RTE_CACHE_LINE_SIZE) * RTE_CACHE_LINE_SIZE;
-+ } else {
-+ attr.init.cap.max_inline_data =
-+ tmpl.txq.max_inline * RTE_CACHE_LINE_SIZE;
-+ }
- }
- if (priv->tso) {
- uint16_t max_tso_inline = ((MLX5_MAX_TSO_HEADER +
---
-2.7.4
-
diff --git a/dpdk/dpdk-17.05_patches/0001-Revert-net-virtio-remove-redundant-MSI-X-detection.patch b/dpdk/dpdk-17.05_patches/0001-Revert-net-virtio-remove-redundant-MSI-X-detection.patch
deleted file mode 100644
index 28dc68d..0000000
--- a/dpdk/dpdk-17.05_patches/0001-Revert-net-virtio-remove-redundant-MSI-X-detection.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 3a1470e031ff33ac99da33b41dae0e9082d4da78 Mon Sep 17 00:00:00 2001
-From: Damjan Marion <damarion@cisco.com>
-Date: Mon, 15 May 2017 12:27:37 +0200
-Subject: [PATCH] Revert "net/virtio: remove redundant MSI-X detection"
-
-This reverts commit ee1843bd89076c59e50cadbef5c935613f543765.
----
- drivers/net/virtio/virtio_pci.c | 27 +++++++++++++++++++++++++++
- 1 file changed, 27 insertions(+)
-
-diff --git a/drivers/net/virtio/virtio_pci.c b/drivers/net/virtio/virtio_pci.c
-index b7b3d6157..127f25791 100644
---- a/drivers/net/virtio/virtio_pci.c
-+++ b/drivers/net/virtio/virtio_pci.c
-@@ -274,6 +274,32 @@ legacy_notify_queue(struct virtio_hw *hw, struct virtqueue *vq)
- VIRTIO_PCI_QUEUE_NOTIFY);
- }
-
-+#ifdef RTE_EXEC_ENV_LINUXAPP
-+static int
-+legacy_virtio_has_msix(const struct rte_pci_addr *loc)
-+{
-+ DIR *d;
-+ char dirname[PATH_MAX];
-+
-+ snprintf(dirname, sizeof(dirname),
-+ "%s/" PCI_PRI_FMT "/msi_irqs", pci_get_sysfs_path(),
-+ loc->domain, loc->bus, loc->devid, loc->function);
-+
-+ d = opendir(dirname);
-+ if (d)
-+ closedir(d);
-+
-+ return d != NULL;
-+}
-+#else
-+static int
-+legacy_virtio_has_msix(const struct rte_pci_addr *loc __rte_unused)
-+{
-+ /* nic_uio does not enable interrupts, return 0 (false). */
-+ return 0;
-+}
-+#endif
-+
- const struct virtio_pci_ops legacy_ops = {
- .read_dev_cfg = legacy_read_dev_config,
- .write_dev_cfg = legacy_write_dev_config,
-@@ -694,6 +720,7 @@ vtpci_init(struct rte_pci_device *dev, struct virtio_hw *hw)
- }
-
- virtio_hw_internal[hw->port_id].vtpci_ops = &legacy_ops;
-+ hw->use_msix = legacy_virtio_has_msix(&dev->addr);
- hw->modern = 0;
-
- return 0;
---
-2.11.0
-
diff --git a/dpdk/dpdk-17.08_patches/0001-net-bonding-support-for-mlx.patch b/dpdk/dpdk-17.08_patches/0001-net-bonding-support-for-mlx.patch
deleted file mode 100644
index 13a2ba6..0000000
--- a/dpdk/dpdk-17.08_patches/0001-net-bonding-support-for-mlx.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-diff --git a/drivers/net/bonding/rte_eth_bond_args.c b/drivers/net/bonding/rte_eth_bond_args.c
-index bb634c6..7c65dda 100644
---- a/drivers/net/bonding/rte_eth_bond_args.c
-+++ b/drivers/net/bonding/rte_eth_bond_args.c
-@@ -61,16 +61,6 @@
- unsigned i;
-
- for (i = 0; i < rte_eth_dev_count(); i++) {
--
-- /* Currently populated by rte_eth_copy_pci_info().
-- *
-- * TODO: Once the PCI bus has arrived we should have a better
-- * way to test for being a PCI device or not.
-- */
-- if (rte_eth_devices[i].data->kdrv == RTE_KDRV_UNKNOWN ||
-- rte_eth_devices[i].data->kdrv == RTE_KDRV_NONE)
-- continue;
--
- pci_dev = RTE_ETH_DEV_TO_PCI(&rte_eth_devices[i]);
- eth_pci_addr = &pci_dev->addr;
-
-@@ -98,6 +88,16 @@
- return -1;
- }
-
-+static inline int
-+pci_addr_cmp(const struct rte_device *dev, const void *_pci_addr)
-+{
-+ struct rte_pci_device *pdev;
-+ const struct rte_pci_addr *paddr = _pci_addr;
-+
-+ pdev = RTE_DEV_TO_PCI(*(struct rte_device **)(void *)&dev);
-+ return rte_eal_compare_pci_addr(&pdev->addr, paddr);
-+}
-+
- /**
- * Parses a port identifier string to a port id by pci address, then by name,
- * and finally port id.
-@@ -106,10 +106,23 @@
- parse_port_id(const char *port_str)
- {
- struct rte_pci_addr dev_addr;
-+ struct rte_bus *pci_bus;
-+ struct rte_device *dev;
- int port_id;
-
-+ pci_bus = rte_bus_find_by_name("pci");
-+ if (pci_bus == NULL) {
-+ RTE_LOG(ERR, PMD, "unable to find PCI bus\n");
-+ return -1;
-+ }
-+
- /* try parsing as pci address, physical devices */
-- if (eal_parse_pci_DomBDF(port_str, &dev_addr) == 0) {
-+ if (pci_bus->parse(port_str, &dev_addr) == 0) {
-+ dev = pci_bus->find_device(NULL, pci_addr_cmp, &dev_addr);
-+ if (dev == NULL) {
-+ RTE_LOG(ERR, PMD, "unable to find PCI device\n");
-+ return -1;
-+ }
- port_id = find_port_id_by_pci_addr(&dev_addr);
- if (port_id < 0)
- return -1;
diff --git a/dpdk/dpdk-17.08_patches/0002-crypto-qat-align-capabilities.patch b/dpdk/dpdk-17.08_patches/0002-crypto-qat-align-capabilities.patch
deleted file mode 100644
index 8179e5e..0000000
--- a/dpdk/dpdk-17.08_patches/0002-crypto-qat-align-capabilities.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From f8184af94214f1c76c0ffda45b9de9243aea287c Mon Sep 17 00:00:00 2001
-From: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
-Date: Tue, 17 Oct 2017 20:05:59 +0100
-Subject: [PATCH] crypto/qat: align capabilities
-
-Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
----
- drivers/crypto/qat/qat_crypto_capabilities.h | 28 ++++++++++++++--------------
- 1 file changed, 14 insertions(+), 14 deletions(-)
-
-diff --git a/drivers/crypto/qat/qat_crypto_capabilities.h b/drivers/crypto/qat/qat_crypto_capabilities.h
-index d8d3fa1..00f8056 100644
---- a/drivers/crypto/qat/qat_crypto_capabilities.h
-+++ b/drivers/crypto/qat/qat_crypto_capabilities.h
-@@ -48,9 +48,9 @@
- .increment = 1 \
- }, \
- .digest_size = { \
-- .min = 20, \
-+ .min = 12, \
- .max = 20, \
-- .increment = 0 \
-+ .increment = 1 \
- }, \
- .iv_size = { 0 } \
- }, } \
-@@ -69,9 +69,9 @@
- .increment = 1 \
- }, \
- .digest_size = { \
-- .min = 28, \
-+ .min = 14, \
- .max = 28, \
-- .increment = 0 \
-+ .increment = 1 \
- }, \
- .iv_size = { 0 } \
- }, } \
-@@ -90,9 +90,9 @@
- .increment = 1 \
- }, \
- .digest_size = { \
-- .min = 32, \
-+ .min = 16, \
- .max = 32, \
-- .increment = 0 \
-+ .increment = 1 \
- }, \
- .iv_size = { 0 } \
- }, } \
-@@ -111,9 +111,9 @@
- .increment = 1 \
- }, \
- .digest_size = { \
-- .min = 48, \
-+ .min = 24, \
- .max = 48, \
-- .increment = 0 \
-+ .increment = 1 \
- }, \
- .iv_size = { 0 } \
- }, } \
-@@ -132,9 +132,9 @@
- .increment = 1 \
- }, \
- .digest_size = { \
-- .min = 64, \
-+ .min = 32, \
- .max = 64, \
-- .increment = 0 \
-+ .increment = 1 \
- }, \
- .iv_size = { 0 } \
- }, } \
-@@ -153,9 +153,9 @@
- .increment = 1 \
- }, \
- .digest_size = { \
-- .min = 16, \
-+ .min = 12, \
- .max = 16, \
-- .increment = 0 \
-+ .increment = 1 \
- }, \
- .iv_size = { 0 } \
- }, } \
-@@ -174,9 +174,9 @@
- .increment = 0 \
- }, \
- .digest_size = { \
-- .min = 16, \
-+ .min = 12, \
- .max = 16, \
-- .increment = 0 \
-+ .increment = 1 \
- }, \
- .aad_size = { 0 }, \
- .iv_size = { 0 } \
---
-2.9.5
-
diff --git a/dpdk/dpdk-17.11_patches/0001-ena-pmd-no-tx-flags.patch b/dpdk/dpdk-17.11_patches/0001-ena-pmd-no-tx-flags.patch
deleted file mode 100644
index 97dbadd..0000000
--- a/dpdk/dpdk-17.11_patches/0001-ena-pmd-no-tx-flags.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-diff --git a/drivers/net/ena/ena_ethdev.c b/drivers/net/ena/ena_ethdev.c
-index 22db895..6f982f6 100644
---- a/drivers/net/ena/ena_ethdev.c
-+++ b/drivers/net/ena/ena_ethdev.c
-@@ -261,16 +261,6 @@ static inline void ena_rx_mbuf_prepare(struct rte_mbuf *mbuf,
- {
- uint64_t ol_flags = 0;
-
-- if (ena_rx_ctx->l4_proto == ENA_ETH_IO_L4_PROTO_TCP)
-- ol_flags |= PKT_TX_TCP_CKSUM;
-- else if (ena_rx_ctx->l4_proto == ENA_ETH_IO_L4_PROTO_UDP)
-- ol_flags |= PKT_TX_UDP_CKSUM;
--
-- if (ena_rx_ctx->l3_proto == ENA_ETH_IO_L3_PROTO_IPV4)
-- ol_flags |= PKT_TX_IPV4;
-- else if (ena_rx_ctx->l3_proto == ENA_ETH_IO_L3_PROTO_IPV6)
-- ol_flags |= PKT_TX_IPV6;
--
- if (unlikely(ena_rx_ctx->l4_csum_err))
- ol_flags |= PKT_RX_L4_CKSUM_BAD;
- if (unlikely(ena_rx_ctx->l3_csum_err))
diff --git a/dpdk/dpdk-18.05_patches/0001-i40evf-don-t-reset-device_info-data.patch b/dpdk/dpdk-18.05_patches/0001-i40evf-don-t-reset-device_info-data.patch
new file mode 100644
index 0000000..b737461
--- /dev/null
+++ b/dpdk/dpdk-18.05_patches/0001-i40evf-don-t-reset-device_info-data.patch
@@ -0,0 +1,28 @@
+From 65a8641604212d58defd71491c900d84d662a086 Mon Sep 17 00:00:00 2001
+From: Damjan Marion <damarion@cisco.com>
+Date: Wed, 6 Jun 2018 21:57:58 +0200
+Subject: [PATCH] i40evf: don't reset device_info data
+
+At this point valid data is already set by rte_eth_get_device_info.
+device field becomes zero and consumer is not able retrieve pci data.
+
+Signed-off-by: Damjan Marion <damarion@cisco.com>
+---
+ drivers/net/i40e/i40e_ethdev_vf.c | 1 -
+ 1 file changed, 1 deletion(-)
+
+diff --git a/drivers/net/i40e/i40e_ethdev_vf.c b/drivers/net/i40e/i40e_ethdev_vf.c
+index 804e44530..86b38d202 100644
+--- a/drivers/net/i40e/i40e_ethdev_vf.c
++++ b/drivers/net/i40e/i40e_ethdev_vf.c
+@@ -2182,7 +2182,6 @@ i40evf_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
+ {
+ struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
+
+- memset(dev_info, 0, sizeof(*dev_info));
+ dev_info->max_rx_queues = vf->vsi_res->num_queue_pairs;
+ dev_info->max_tx_queues = vf->vsi_res->num_queue_pairs;
+ dev_info->min_rx_bufsize = I40E_BUF_SIZE_MIN;
+--
+2.17.1
+
diff --git a/src/plugins/dpdk/buffer.c b/src/plugins/dpdk/buffer.c
index 31e8eee..6afd20e 100644
--- a/src/plugins/dpdk/buffer.c
+++ b/src/plugins/dpdk/buffer.c
@@ -463,22 +463,26 @@
clib_error_t *error = 0;
u32 size, obj_size;
i32 ret;
+ uword i;
obj_size = rte_mempool_calc_obj_size (elt_size, 0, 0);
- size = rte_mempool_xmem_size (num_elts, obj_size, 21, 0);
- error =
- vlib_physmem_region_alloc (vm, (char *) pool_name, size, numa,
- VLIB_PHYSMEM_F_HUGETLB | VLIB_PHYSMEM_F_SHARED,
- pri);
+#if RTE_VERSION < RTE_VERSION_NUM(18, 5, 0, 0)
+ size = rte_mempool_xmem_size (num_elts, obj_size, 21, 0);
+#else
+ size = rte_mempool_calc_mem_size_helper (num_elts, obj_size, 21);
+#endif
+
+ error = vlib_physmem_region_alloc (vm, (char *) pool_name, size, numa,
+ VLIB_PHYSMEM_F_HUGETLB |
+ VLIB_PHYSMEM_F_SHARED, pri);
if (error)
return error;
pr = vlib_physmem_get_region (vm, pri[0]);
- mp =
- rte_mempool_create_empty ((char *) pool_name, num_elts, elt_size,
- 512, pool_priv_size, numa, 0);
+ mp = rte_mempool_create_empty ((char *) pool_name, num_elts, elt_size,
+ 512, pool_priv_size, numa, 0);
if (!mp)
return clib_error_return (0, "failed to create %s", pool_name);
@@ -490,13 +494,16 @@
priv.mbp_priv.mbuf_priv_size = VLIB_BUFFER_HDR_SIZE;
rte_pktmbuf_pool_init (mp, &priv);
- ret =
- rte_mempool_populate_iova_tab (mp, pr->mem, pr->page_table, pr->n_pages,
- pr->log2_page_size, NULL, NULL);
- if (ret != (i32) mp->size)
+ for (i = 0; i < pr->n_pages; i++)
{
- rte_mempool_free (mp);
- return clib_error_return (0, "failed to populate %s", pool_name);
+ size_t page_size = 1 << pr->log2_page_size;
+ ret = rte_mempool_populate_iova (mp, ((char *) pr->mem) + i * page_size,
+ pr->page_table[i], page_size, 0, 0);
+ if (ret < 0)
+ {
+ rte_mempool_free (mp);
+ return clib_error_return (0, "failed to populate %s", pool_name);
+ }
}
_mp[0] = mp;
diff --git a/src/plugins/dpdk/device/cli.c b/src/plugins/dpdk/device/cli.c
index 2530858..2a49771 100644
--- a/src/plugins/dpdk/device/cli.c
+++ b/src/plugins/dpdk/device/cli.c
@@ -46,6 +46,7 @@
dpdk_main_t *dm = &dpdk_main;
vnet_hw_interface_t *hw;
struct rte_eth_dev_info dev_info;
+ struct rte_pci_device *pci_dev;
uword *p = 0;
clib_error_t *error = NULL;
@@ -66,14 +67,21 @@
*xd = vec_elt_at_index (dm->devices, hw->dev_instance);
rte_eth_dev_info_get ((*xd)->port_id, &dev_info);
- if (dev_info.pci_dev)
+
+#if RTE_VERSION < RTE_VERSION_NUM(18, 5, 0, 0)
+ pci_dev = dev_info.pci_dev;
+#else
+ pci_dev = RTE_DEV_TO_PCI (dev_info.device);
+#endif
+
+ if (pci_dev)
{ /* bonded interface has no pci info */
vlib_pci_addr_t pci_addr;
- pci_addr.domain = dev_info.pci_dev->addr.domain;
- pci_addr.bus = dev_info.pci_dev->addr.bus;
- pci_addr.slot = dev_info.pci_dev->addr.devid;
- pci_addr.function = dev_info.pci_dev->addr.function;
+ pci_addr.domain = pci_dev->addr.domain;
+ pci_addr.bus = pci_dev->addr.bus;
+ pci_addr.slot = pci_dev->addr.devid;
+ pci_addr.function = pci_dev->addr.function;
p =
hash_get (dm->conf->device_config_index_by_pci_addr, pci_addr.as_u32);
@@ -1218,6 +1226,7 @@
/* Device specific data */
struct rte_eth_dev_info dev_info;
+ struct rte_pci_device *pci_dev;
dpdk_device_config_t *devconf = 0;
vnet_hw_interface_t *hw;
dpdk_device_t *xd;
@@ -1284,14 +1293,21 @@
xd = vec_elt_at_index (dm->devices, hw->dev_instance);
rte_eth_dev_info_get (xd->port_id, &dev_info);
- if (dev_info.pci_dev)
+
+#if RTE_VERSION < RTE_VERSION_NUM(18, 5, 0, 0)
+ pci_dev = dev_info.pci_dev;
+#else
+ pci_dev = RTE_DEV_TO_PCI (dev_info.device);
+#endif
+
+ if (pci_dev)
{ /* bonded interface has no pci info */
vlib_pci_addr_t pci_addr;
- pci_addr.domain = dev_info.pci_dev->addr.domain;
- pci_addr.bus = dev_info.pci_dev->addr.bus;
- pci_addr.slot = dev_info.pci_dev->addr.devid;
- pci_addr.function = dev_info.pci_dev->addr.function;
+ pci_addr.domain = pci_dev->addr.domain;
+ pci_addr.bus = pci_dev->addr.bus;
+ pci_addr.slot = pci_dev->addr.devid;
+ pci_addr.function = pci_dev->addr.function;
p =
hash_get (dm->conf->device_config_index_by_pci_addr, pci_addr.as_u32);
@@ -1443,6 +1459,7 @@
u32 hw_if_index = (u32) ~ 0;
u32 profile_id, subport_id, i;
struct rte_eth_dev_info dev_info;
+ struct rte_pci_device *pci_dev;
dpdk_device_config_t *devconf = 0;
vlib_thread_registration_t *tr;
uword *p = 0;
@@ -1475,14 +1492,21 @@
xd = vec_elt_at_index (dm->devices, hw->dev_instance);
rte_eth_dev_info_get (xd->port_id, &dev_info);
- if (dev_info.pci_dev)
+
+#if RTE_VERSION < RTE_VERSION_NUM(18, 5, 0, 0)
+ pci_dev = dev_info.pci_dev;
+#else
+ pci_dev = RTE_DEV_TO_PCI (dev_info.device);
+#endif
+
+ if (pci_dev)
{ /* bonded interface has no pci info */
vlib_pci_addr_t pci_addr;
- pci_addr.domain = dev_info.pci_dev->addr.domain;
- pci_addr.bus = dev_info.pci_dev->addr.bus;
- pci_addr.slot = dev_info.pci_dev->addr.devid;
- pci_addr.function = dev_info.pci_dev->addr.function;
+ pci_addr.domain = pci_dev->addr.domain;
+ pci_addr.bus = pci_dev->addr.bus;
+ pci_addr.slot = pci_dev->addr.devid;
+ pci_addr.function = pci_dev->addr.function;
p =
hash_get (dm->conf->device_config_index_by_pci_addr, pci_addr.as_u32);
diff --git a/src/plugins/dpdk/device/format.c b/src/plugins/dpdk/device/format.c
index f10b00e..4b8e3be 100644
--- a/src/plugins/dpdk/device/format.c
+++ b/src/plugins/dpdk/device/format.c
@@ -163,6 +163,7 @@
char *device_name;
u32 i = va_arg (*args, u32);
struct rte_eth_dev_info dev_info;
+ struct rte_pci_device *pci_dev;
u8 *ret;
if (dm->conf->interface_name_format_decimal)
@@ -246,12 +247,15 @@
}
rte_eth_dev_info_get (i, &dev_info);
+#if RTE_VERSION < RTE_VERSION_NUM(18, 5, 0, 0)
+ pci_dev = dev_info.pci_dev;
+#else
+ pci_dev = RTE_DEV_TO_PCI (dev_info.device);
+#endif
- if (dev_info.pci_dev &&
- dm->devices[i].port_type != VNET_DPDK_PORT_TYPE_FAILSAFE)
- ret = format (s, devname_format, device_name, dev_info.pci_dev->addr.bus,
- dev_info.pci_dev->addr.devid,
- dev_info.pci_dev->addr.function);
+ if (pci_dev && dm->devices[i].port_type != VNET_DPDK_PORT_TYPE_FAILSAFE)
+ ret = format (s, devname_format, device_name, pci_dev->addr.bus,
+ pci_dev->addr.devid, pci_dev->addr.function);
else
ret = format (s, "%s%d", device_name, dm->devices[i].port_id);
@@ -507,7 +511,11 @@
retval = rte_eth_dev_rss_hash_conf_get (xd->port_id, &rss_conf);
if (retval < 0)
clib_warning ("rte_eth_dev_rss_hash_conf_get returned %d", retval);
+#if RTE_VERSION < RTE_VERSION_NUM(18, 5, 0, 0)
pci = di.pci_dev;
+#else
+ pci = RTE_DEV_TO_PCI (di.device);
+#endif
if (pci)
s =
diff --git a/src/plugins/dpdk/device/init.c b/src/plugins/dpdk/device/init.c
index ceaa5bb..2232b89 100644
--- a/src/plugins/dpdk/device/init.c
+++ b/src/plugins/dpdk/device/init.c
@@ -227,7 +227,12 @@
vec_validate_aligned (dm->devices_by_hqos_cpu, tm->n_vlib_mains - 1,
CLIB_CACHE_LINE_BYTES);
+#if RTE_VERSION < RTE_VERSION_NUM(18, 5, 0, 0)
nports = rte_eth_dev_count ();
+#else
+ nports = rte_eth_dev_count_avail ();
+#endif
+
if (nports < 1)
{
dpdk_log_notice ("DPDK drivers found no ports...");
@@ -260,19 +265,36 @@
u8 addr[6];
u8 vlan_strip = 0;
struct rte_eth_dev_info dev_info;
+ struct rte_pci_device *pci_dev;
struct rte_eth_link l;
dpdk_device_config_t *devconf = 0;
vlib_pci_addr_t pci_addr;
uword *p = 0;
+ if (!rte_eth_dev_is_valid_port(i))
+ continue;
+
rte_eth_link_get_nowait (i, &l);
rte_eth_dev_info_get (i, &dev_info);
- if (dev_info.pci_dev) /* bonded interface has no pci info */
+
+#if RTE_VERSION < RTE_VERSION_NUM(18, 5, 0, 0)
+ pci_dev = dev_info.pci_dev;
+#else
+ if (dev_info.device == 0)
{
- pci_addr.domain = dev_info.pci_dev->addr.domain;
- pci_addr.bus = dev_info.pci_dev->addr.bus;
- pci_addr.slot = dev_info.pci_dev->addr.devid;
- pci_addr.function = dev_info.pci_dev->addr.function;
+ clib_warning ("DPDK bug: missing device info. Skipping %s device",
+ dev_info.driver_name);
+ continue;
+ }
+ pci_dev = RTE_DEV_TO_PCI (dev_info.device);
+#endif
+
+ if (pci_dev) /* bonded interface has no pci info */
+ {
+ pci_addr.domain = pci_dev->addr.domain;
+ pci_addr.bus = pci_dev->addr.bus;
+ pci_addr.slot = pci_dev->addr.devid;
+ pci_addr.function = pci_dev->addr.function;
p =
hash_get (dm->conf->device_config_index_by_pci_addr,
pci_addr.as_u32);
@@ -290,12 +312,12 @@
xd->cpu_socket = (i8) rte_eth_dev_socket_id (i);
/* Handle interface naming for devices with multiple ports sharing same PCI ID */
- if (dev_info.pci_dev)
+ if (pci_dev)
{
struct rte_eth_dev_info di = { 0 };
rte_eth_dev_info_get (i + 1, &di);
- if (di.pci_dev && pci_addr.as_u32 != last_pci_addr.as_u32 &&
- memcmp (&dev_info.pci_dev->addr, &di.pci_dev->addr,
+ if (pci_dev && pci_addr.as_u32 != last_pci_addr.as_u32 &&
+ memcmp (&pci_dev->addr, &pci_dev->addr,
sizeof (struct rte_pci_addr)) == 0)
{
xd->interface_name_suffix = format (0, "0");
@@ -358,8 +380,8 @@
xd->flags |= DPDK_DEVICE_FLAG_PMD;
/* workaround for drivers not setting driver_name */
- if ((!dev_info.driver_name) && (dev_info.pci_dev))
- dev_info.driver_name = dev_info.pci_dev->driver->driver.name;
+ if ((!dev_info.driver_name) && (pci_dev))
+ dev_info.driver_name = pci_dev->driver->driver.name;
ASSERT (dev_info.driver_name);
@@ -1533,7 +1555,11 @@
* 2. Set up info and register slave link state change callback handling.
* 3. Set up info for bond interface related CLI support.
*/
+#if RTE_VERSION < RTE_VERSION_NUM(18, 5, 0, 0)
int nports = rte_eth_dev_count ();
+#else
+ int nports = rte_eth_dev_count_avail ();
+#endif
if (nports > 0)
{
/* *INDENT-OFF* */
diff --git a/src/plugins/dpdk/ipsec/ipsec.c b/src/plugins/dpdk/ipsec/ipsec.c
index 268f27b..731613b 100644
--- a/src/plugins/dpdk/ipsec/ipsec.c
+++ b/src/plugins/dpdk/ipsec/ipsec.c
@@ -873,7 +873,12 @@
pool_name = format (0, "session_h_pool_numa%u%c", numa, 0);
+
+#if RTE_VERSION < RTE_VERSION_NUM(18, 5, 0, 0)
elt_size = rte_cryptodev_get_header_session_size ();
+#else
+ elt_size = rte_cryptodev_sym_get_header_session_size ();
+#endif
error =
dpdk_pool_create (vm, pool_name, elt_size, DPDK_CRYPTO_NB_SESS_OBJS,
@@ -912,7 +917,12 @@
return NULL;
pool_name = format (0, "session_drv%u_pool_numa%u%c", dev->drv_id, numa, 0);
+
+#if RTE_VERSION < RTE_VERSION_NUM(18, 5, 0, 0)
elt_size = rte_cryptodev_get_private_session_size (dev->id);
+#else
+ elt_size = rte_cryptodev_sym_get_private_session_size (dev->id);
+#endif
error =
dpdk_pool_create (vm, pool_name, elt_size, DPDK_CRYPTO_NB_SESS_OBJS,