blob: f4420eccac45750304744b6758b219c1d4e957c9 [file] [log] [blame]
create packet-generator interface pg0
set int mac addr pg0 4.5.6
create sub-interfaces pg0 1
create sub-interfaces pg0 2
create sub-interfaces pg0 3
ip table add 1
ip table add 2
ip table add 3
set int ip table pg0.1 1
set int ip table pg0.2 2
set int ip table pg0.3 3
set int ip address pg0.1 192.168.0.1/24
set int ip address pg0.2 192.168.0.1/24
set int ip address pg0.3 192.168.0.1/24
set int state pg0 up
set int state pg0.1 up
set int state pg0.2 up
set int state pg0.3 up
ipsec sa add 2 spi 2 crypto-key 6541686776336961656264656f6f6579 crypto-alg aes-cbc-128 tunnel-src 192.168.0.1 tunnel-dst 192.168.0.2 tx-table-id 2
ipsec sa add 3 spi 3 crypto-key 6541686776336961656264656f6f6579 crypto-alg aes-cbc-128 tunnel-src 192.168.0.1 tunnel-dst 192.168.0.2 tx-table-id 3
ipsec spd add 1
set interface ipsec spd pg0.1 1
ipsec policy add spd 1 priority 100 outbound action bypass protocol 50
ipsec policy add spd 1 priority 10 outbound action protect sa 2 local-ip-range 10.5.0.0 - 10.5.0.255 remote-ip-range 10.6.0.0 - 10.6.0.16
ipsec policy add spd 1 priority 10 outbound action protect sa 3 local-ip-range 10.5.0.0 - 10.5.0.255 remote-ip-range 10.6.0.17 - 10.6.0.32
ip route table 1 add 10.6.0.0/16 via 192.168.0.2 pg0.1
set ip neighbor pg0.1 192.168.0.2 00:11:22:33:44:55
set ip neighbor pg0.2 192.168.0.2 00:11:22:33:44:55
set ip neighbor pg0.3 192.168.0.2 00:11:22:33:44:55
trace add pg-input 100
packet-generator new { \
name ipsec2 \
limit 1 \
rate 1e4 \
node ethernet-input \
interface pg0 \
size 100-100 \
data { \
IP4: 1.2.3 -> 4.5.6 vlan 1 \
UDP: 10.5.0.1 -> 10.6.0.1 \
UDP: 4321 -> 1234 \
length 72 \
incrementing 100 \
} \
}
packet-generator new { \
name ipsec3 \
limit 1 \
rate 1e4 \
node ethernet-input \
interface pg0 \
size 100-100 \
data { \
IP4: 1.2.3 -> 4.5.6 vlan 1 \
UDP: 10.5.0.1 -> 10.6.0.22 \
UDP: 4321 -> 1234 \
length 72 \
incrementing 100 \
} \
}