#!/usr/bin/env python3

import unittest

from framework import VppTestCase
from asfframework import VppTestRunner
from vpp_ip_route import VppIpRoute, VppRoutePath

import scapy.compat
from scapy.packet import Raw
from scapy.layers.l2 import Ether, Dot1Q
from scapy.layers.inet6 import IPv6, UDP, IPv6ExtHdrSegmentRouting
from scapy.layers.inet import IP, UDP

from util import ppp


class TestSRv6As(VppTestCase):
    """SRv6 Static Proxy plugin Test Case"""

    @classmethod
    def setUpClass(self):
        super(TestSRv6As, self).setUpClass()

    @classmethod
    def tearDownClass(cls):
        super(TestSRv6As, cls).tearDownClass()

    def setUp(self):
        """Perform test setup before each test case."""
        super(TestSRv6As, self).setUp()

        # packet sizes, inclusive L2 overhead
        self.pg_packet_sizes = [64, 512, 1518, 9018]

        # reset packet_infos
        self.reset_packet_infos()

    def tearDown(self):
        """Clean up test setup after each test case."""
        self.teardown_interfaces()

        super(TestSRv6As, self).tearDown()

    def configure_interface(
        self, interface, ipv6=False, ipv4=False, ipv6_table_id=0, ipv4_table_id=0
    ):
        """Configure interface.
        :param ipv6: configure IPv6 on interface
        :param ipv4: configure IPv4 on interface
        :param ipv6_table_id: FIB table_id for IPv6
        :param ipv4_table_id: FIB table_id for IPv4
        """
        self.logger.debug("Configuring interface %s" % (interface.name))
        if ipv6:
            self.logger.debug("Configuring IPv6")
            interface.set_table_ip6(ipv6_table_id)
            interface.config_ip6()
            interface.resolve_ndp(timeout=5)
        if ipv4:
            self.logger.debug("Configuring IPv4")
            interface.set_table_ip4(ipv4_table_id)
            interface.config_ip4()
            interface.resolve_arp()
        interface.admin_up()

    def setup_interfaces(self, ipv6=[], ipv4=[], ipv6_table_id=[], ipv4_table_id=[]):
        """Create and configure interfaces.

        :param ipv6: list of interface IPv6 capabilities
        :param ipv4: list of interface IPv4 capabilities
        :param ipv6_table_id: list of intf IPv6 FIB table_ids
        :param ipv4_table_id: list of intf IPv4 FIB table_ids
        :returns: List of created interfaces.
        """
        # how many interfaces?
        if len(ipv6):
            count = len(ipv6)
        else:
            count = len(ipv4)
        self.logger.debug("Creating and configuring %d interfaces" % (count))

        # fill up ipv6 and ipv4 lists if needed
        # not enabled (False) is the default
        if len(ipv6) < count:
            ipv6 += (count - len(ipv6)) * [False]
        if len(ipv4) < count:
            ipv4 += (count - len(ipv4)) * [False]

        # fill up table_id lists if needed
        # table_id 0 (global) is the default
        if len(ipv6_table_id) < count:
            ipv6_table_id += (count - len(ipv6_table_id)) * [0]
        if len(ipv4_table_id) < count:
            ipv4_table_id += (count - len(ipv4_table_id)) * [0]

        # create 'count' pg interfaces
        self.create_pg_interfaces(range(count))

        # setup all interfaces
        for i in range(count):
            intf = self.pg_interfaces[i]
            self.configure_interface(
                intf, ipv6[i], ipv4[i], ipv6_table_id[i], ipv4_table_id[i]
            )

        if any(ipv6):
            self.logger.debug(self.vapi.cli("show ip6 neighbors"))
        if any(ipv4):
            self.logger.debug(self.vapi.cli("show ip4 neighbors"))
        self.logger.debug(self.vapi.cli("show interface"))
        self.logger.debug(self.vapi.cli("show hardware"))

        return self.pg_interfaces

    def teardown_interfaces(self):
        """Unconfigure and bring down interface."""
        self.logger.debug("Tearing down interfaces")
        # tear down all interfaces
        # AFAIK they cannot be deleted
        for i in self.pg_interfaces:
            self.logger.debug("Tear down interface %s" % (i.name))
            i.admin_down()
            i.unconfig()
            i.set_table_ip4(0)
            i.set_table_ip6(0)

    def test_SRv6_End_AS_IPv6_noSRH(self):
        """Test SRv6 End.AS behavior with IPv6 traffic and no SRH rewrite."""
        self.run_SRv6_End_AS_IPv6(
            sid_list=["a1::", "a2::a6", "a3::"],
            test_sid_index=1,
            rewrite_src_addr="a2::",
        )

    def test_SRv6_End_AS_IPv6_SRH(self):
        """Test SRv6 End.AS behavior with IPv6 traffic and SRH rewrite."""
        self.run_SRv6_End_AS_IPv6(
            sid_list=["a1::a6", "a2::", "a3::"],
            test_sid_index=0,
            rewrite_src_addr="a1::",
        )

    def test_SRv6_End_AS_IPv4_noSRH(self):
        """Test SRv6 End.AS behavior with IPv4 traffic and no SRH rewrite."""
        self.run_SRv6_End_AS_IPv4(
            sid_list=["a1::", "a2::a6", "a3::"],
            test_sid_index=1,
            rewrite_src_addr="a2::",
        )

    def test_SRv6_End_AS_IPv4_SRH(self):
        """Test SRv6 End.AS behavior with IPv4 traffic and SRH rewrite."""
        self.run_SRv6_End_AS_IPv4(
            sid_list=["a1::a6", "a2::", "a3::"],
            test_sid_index=0,
            rewrite_src_addr="a1::",
        )

    def test_SRv6_End_AS_L2_noSRH(self):
        """Test SRv6 End.AS behavior with L2 traffic and no SRH rewrite."""
        self.run_SRv6_End_AS_L2(
            sid_list=["a1::", "a2::a6", "a3::"],
            test_sid_index=1,
            rewrite_src_addr="a2::",
        )

    def test_SRv6_End_AS_L2_SRH(self):
        """Test SRv6 End.AS behavior with L2 traffic and SRH rewrite."""
        self.run_SRv6_End_AS_L2(
            sid_list=["a1::a6", "a2::", "a3::"],
            test_sid_index=0,
            rewrite_src_addr="a1::",
        )

    def run_SRv6_End_AS_L2(self, sid_list, test_sid_index, rewrite_src_addr):
        """Run SRv6 End.AS test with L2 traffic."""
        self.rewrite_src_addr = rewrite_src_addr
        self.rewrite_sid_list = sid_list[test_sid_index + 1 : :]

        # send traffic to one destination interface
        # source and destination interfaces are IPv6 only
        self.setup_interfaces(ipv6=[True, False])

        # configure route to next segment
        route = VppIpRoute(
            self,
            sid_list[test_sid_index + 1],
            128,
            [VppRoutePath(self.pg0.remote_ip6, self.pg0.sw_if_index)],
        )
        route.add_vpp_config()

        # configure SRv6 localSID behavior
        cli_str = (
            "sr localsid address "
            + sid_list[test_sid_index]
            + " behavior end.as"
            + " oif "
            + self.pg1.name
            + " iif "
            + self.pg1.name
            + " src "
            + self.rewrite_src_addr
        )
        for s in self.rewrite_sid_list:
            cli_str += " next " + s
        self.vapi.cli(cli_str)

        # log the localsids
        self.logger.debug(self.vapi.cli("show sr localsid"))

        # send one packet per packet size
        count = len(self.pg_packet_sizes)

        # prepare L2 in SRv6 headers
        packet_header1 = self.create_packet_header_IPv6_SRH_L2(
            sidlist=sid_list[::-1], segleft=len(sid_list) - test_sid_index - 1, vlan=0
        )

        # generate packets (pg0->pg1)
        pkts1 = self.create_stream(
            self.pg0, self.pg1, packet_header1, self.pg_packet_sizes, count
        )

        # send packets and verify received packets
        self.send_and_verify_pkts(
            self.pg0, pkts1, self.pg1, self.compare_rx_tx_packet_End_AS_L2_out
        )

        # log the localsid counters
        self.logger.info(self.vapi.cli("show sr localsid"))

        # prepare L2 header for returning packets
        packet_header2 = self.create_packet_header_L2()

        # generate returning packets (pg1->pg0)
        pkts2 = self.create_stream(
            self.pg1, self.pg0, packet_header2, self.pg_packet_sizes, count
        )

        # send packets and verify received packets
        self.send_and_verify_pkts(
            self.pg1, pkts2, self.pg0, self.compare_rx_tx_packet_End_AS_L2_in
        )

        # log the localsid counters
        self.logger.info(self.vapi.cli("show sr localsid"))

        # remove SRv6 localSIDs
        self.vapi.cli("sr localsid del address " + sid_list[test_sid_index])

        # cleanup interfaces
        self.teardown_interfaces()

    def run_SRv6_End_AS_IPv6(self, sid_list, test_sid_index, rewrite_src_addr):
        """Run SRv6 End.AS test with IPv6 traffic."""
        self.rewrite_src_addr = rewrite_src_addr
        self.rewrite_sid_list = sid_list[test_sid_index + 1 : :]

        # send traffic to one destination interface
        # source and destination interfaces are IPv6 only
        self.setup_interfaces(ipv6=[True, True])

        # configure route to next segment
        route = VppIpRoute(
            self,
            sid_list[test_sid_index + 1],
            128,
            [VppRoutePath(self.pg0.remote_ip6, self.pg0.sw_if_index)],
        )
        route.add_vpp_config()

        # configure SRv6 localSID behavior
        cli_str = (
            "sr localsid address "
            + sid_list[test_sid_index]
            + " behavior end.as"
            + " nh "
            + self.pg1.remote_ip6
            + " oif "
            + self.pg1.name
            + " iif "
            + self.pg1.name
            + " src "
            + self.rewrite_src_addr
        )
        for s in self.rewrite_sid_list:
            cli_str += " next " + s
        self.vapi.cli(cli_str)

        # log the localsids
        self.logger.debug(self.vapi.cli("show sr localsid"))

        # send one packet per packet size
        count = len(self.pg_packet_sizes)

        # prepare IPv6 in SRv6 headers
        packet_header1 = self.create_packet_header_IPv6_SRH_IPv6(
            sidlist=sid_list[::-1], segleft=len(sid_list) - test_sid_index - 1
        )

        # generate packets (pg0->pg1)
        pkts1 = self.create_stream(
            self.pg0, self.pg1, packet_header1, self.pg_packet_sizes, count
        )

        # send packets and verify received packets
        self.send_and_verify_pkts(
            self.pg0, pkts1, self.pg1, self.compare_rx_tx_packet_End_AS_IPv6_out
        )

        # log the localsid counters
        self.logger.info(self.vapi.cli("show sr localsid"))

        # prepare IPv6 header for returning packets
        packet_header2 = self.create_packet_header_IPv6()

        # generate returning packets (pg1->pg0)
        pkts2 = self.create_stream(
            self.pg1, self.pg0, packet_header2, self.pg_packet_sizes, count
        )

        # send packets and verify received packets
        self.send_and_verify_pkts(
            self.pg1, pkts2, self.pg0, self.compare_rx_tx_packet_End_AS_IPv6_in
        )

        # log the localsid counters
        self.logger.info(self.vapi.cli("show sr localsid"))

        # remove SRv6 localSIDs
        self.vapi.cli("sr localsid del address " + sid_list[test_sid_index])

        # cleanup interfaces
        self.teardown_interfaces()

    def run_SRv6_End_AS_IPv4(self, sid_list, test_sid_index, rewrite_src_addr):
        """Run SRv6 End.AS test with IPv4 traffic."""
        self.rewrite_src_addr = rewrite_src_addr
        self.rewrite_sid_list = sid_list[test_sid_index + 1 : :]

        # send traffic to one destination interface
        # source and destination interfaces are IPv6 only
        self.setup_interfaces(ipv6=[True, False], ipv4=[True, True])

        # configure route to next segment
        route = VppIpRoute(
            self,
            sid_list[test_sid_index + 1],
            128,
            [VppRoutePath(self.pg0.remote_ip6, self.pg0.sw_if_index)],
        )
        route.add_vpp_config()

        # configure SRv6 localSID behavior
        cli_str = (
            "sr localsid address "
            + sid_list[test_sid_index]
            + " behavior end.as"
            + " nh "
            + self.pg1.remote_ip4
            + " oif "
            + self.pg1.name
            + " iif "
            + self.pg1.name
            + " src "
            + self.rewrite_src_addr
        )
        for s in self.rewrite_sid_list:
            cli_str += " next " + s
        self.vapi.cli(cli_str)

        # log the localsids
        self.logger.debug(self.vapi.cli("show sr localsid"))

        # send one packet per packet size
        count = len(self.pg_packet_sizes)

        # prepare IPv4 in SRv6 headers
        packet_header1 = self.create_packet_header_IPv6_SRH_IPv4(
            sidlist=sid_list[::-1], segleft=len(sid_list) - test_sid_index - 1
        )

        # generate packets (pg0->pg1)
        pkts1 = self.create_stream(
            self.pg0, self.pg1, packet_header1, self.pg_packet_sizes, count
        )

        # send packets and verify received packets
        self.send_and_verify_pkts(
            self.pg0, pkts1, self.pg1, self.compare_rx_tx_packet_End_AS_IPv4_out
        )

        # log the localsid counters
        self.logger.info(self.vapi.cli("show sr localsid"))

        # prepare IPv6 header for returning packets
        packet_header2 = self.create_packet_header_IPv4()

        # generate returning packets (pg1->pg0)
        pkts2 = self.create_stream(
            self.pg1, self.pg0, packet_header2, self.pg_packet_sizes, count
        )

        # send packets and verify received packets
        self.send_and_verify_pkts(
            self.pg1, pkts2, self.pg0, self.compare_rx_tx_packet_End_AS_IPv4_in
        )

        # log the localsid counters
        self.logger.info(self.vapi.cli("show sr localsid"))

        # remove SRv6 localSIDs
        self.vapi.cli("sr localsid del address " + sid_list[test_sid_index])

        # cleanup interfaces
        self.teardown_interfaces()

    def compare_rx_tx_packet_End_AS_IPv6_in(self, tx_pkt, rx_pkt):
        """Compare input and output packet after passing End.AS

        :param tx_pkt: transmitted packet
        :param rx_pkt: received packet
        """

        # get first (outer) IPv6 header of rx'ed packet
        rx_ip = rx_pkt.getlayer(IPv6)
        rx_srh = None

        tx_ip = tx_pkt.getlayer(IPv6)

        # expected segment-list (SRH order)
        tx_seglist = self.rewrite_sid_list[::-1]

        # received ip.src should be equal to SR Policy source
        self.assertEqual(rx_ip.src, self.rewrite_src_addr)
        # received ip.dst should be equal to expected sidlist[lastentry]
        self.assertEqual(rx_ip.dst, tx_seglist[-1])

        if len(tx_seglist) > 1:
            # rx'ed packet should have SRH
            self.assertTrue(rx_pkt.haslayer(IPv6ExtHdrSegmentRouting))
            # get SRH
            rx_srh = rx_pkt.getlayer(IPv6ExtHdrSegmentRouting)
            # rx'ed seglist should be equal to expected seglist
            self.assertEqual(rx_srh.addresses, tx_seglist)
            # segleft should be equal to size expected seglist-1
            self.assertEqual(rx_srh.segleft, len(tx_seglist) - 1)
            # segleft should be equal to lastentry
            self.assertEqual(rx_srh.segleft, rx_srh.lastentry)
            # get payload
            payload = rx_srh.payload
        else:
            # rx'ed packet should NOT have SRH
            self.assertFalse(rx_pkt.haslayer(IPv6ExtHdrSegmentRouting))
            # get payload
            payload = rx_ip.payload

        # the whole rx'ed pkt beyond SRH should be equal to tx'ed pkt
        # except for the hop-limit field
        #   -> update tx'ed hlim to the expected hlim
        tx_ip.hlim = tx_ip.hlim - 1

        self.assertEqual(payload, tx_ip)

        self.logger.debug("packet verification: SUCCESS")

    def compare_rx_tx_packet_End_AS_IPv4_in(self, tx_pkt, rx_pkt):
        """Compare input and output packet after passing End.AS

        :param tx_pkt: transmitted packet
        :param rx_pkt: received packet
        """

        # get first (outer) IPv6 header of rx'ed packet
        rx_ip = rx_pkt.getlayer(IPv6)
        rx_srh = None

        tx_ip = tx_pkt.getlayer(IP)

        # expected segment-list (SRH order)
        tx_seglist = self.rewrite_sid_list[::-1]

        # received ip.src should be equal to SR Policy source
        self.assertEqual(rx_ip.src, self.rewrite_src_addr)
        # received ip.dst should be equal to expected sidlist[lastentry]
        self.assertEqual(rx_ip.dst, tx_seglist[-1])

        if len(tx_seglist) > 1:
            # rx'ed packet should have SRH and IPv4 header
            self.assertTrue(rx_pkt.haslayer(IPv6ExtHdrSegmentRouting))
            self.assertTrue(rx_ip.payload.haslayer(IP))
            # get SRH
            rx_srh = rx_pkt.getlayer(IPv6ExtHdrSegmentRouting)
            # rx'ed seglist should be equal to seglist
            self.assertEqual(rx_srh.addresses, tx_seglist)
            # segleft should be equal to size seglist-1
            self.assertEqual(rx_srh.segleft, len(tx_seglist) - 1)
            # segleft should be equal to lastentry
            self.assertEqual(rx_srh.segleft, rx_srh.lastentry)
            payload = rx_srh.payload
        else:
            # rx'ed packet should NOT have SRH
            self.assertFalse(rx_pkt.haslayer(IPv6ExtHdrSegmentRouting))
            # get payload
            payload = rx_ip.payload

        # the whole rx'ed pkt beyond SRH should be equal to tx'ed pkt
        # except for the ttl field and ip checksum
        #   -> adjust tx'ed ttl to expected ttl
        tx_ip.ttl = tx_ip.ttl - 1
        #   -> set tx'ed ip checksum to None and let scapy recompute
        tx_ip.chksum = None
        # read back the pkt (with str()) to force computing these fields
        # probably other ways to accomplish this are possible
        tx_ip = IP(scapy.compat.raw(tx_ip))

        self.assertEqual(payload, tx_ip)

        self.logger.debug("packet verification: SUCCESS")

    def compare_rx_tx_packet_End_AS_L2_in(self, tx_pkt, rx_pkt):
        """Compare input and output packet after passing End.AS

        :param tx_pkt: transmitted packet
        :param rx_pkt: received packet
        """

        # get first (outer) IPv6 header of rx'ed packet
        rx_ip = rx_pkt.getlayer(IPv6)
        rx_srh = None

        tx_ether = tx_pkt.getlayer(Ether)

        # expected segment-list (SRH order)
        tx_seglist = self.rewrite_sid_list[::-1]

        # received ip.src should be equal to SR Policy source
        self.assertEqual(rx_ip.src, self.rewrite_src_addr)
        # received ip.dst should be equal to expected sidlist[lastentry]
        self.assertEqual(rx_ip.dst, tx_seglist[-1])

        if len(tx_seglist) > 1:
            # rx'ed packet should have SRH
            self.assertTrue(rx_pkt.haslayer(IPv6ExtHdrSegmentRouting))
            # get SRH
            rx_srh = rx_pkt.getlayer(IPv6ExtHdrSegmentRouting)
            # rx'ed seglist should be equal to seglist
            self.assertEqual(rx_srh.addresses, tx_seglist)
            # segleft should be equal to size seglist-1
            self.assertEqual(rx_srh.segleft, len(tx_seglist) - 1)
            # segleft should be equal to lastentry
            self.assertEqual(rx_srh.segleft, rx_srh.lastentry)
            # nh should be "No Next Header" (143)
            self.assertEqual(rx_srh.nh, 143)
            # get payload
            payload = rx_srh.payload
        else:
            # rx'ed packet should NOT have SRH
            self.assertFalse(rx_pkt.haslayer(IPv6ExtHdrSegmentRouting))
            # get payload
            payload = rx_ip.payload

        # the whole rx'ed pkt beyond SRH should be equal to tx'ed pkt
        self.assertEqual(Ether(scapy.compat.raw(payload)), tx_ether)

        self.logger.debug("packet verification: SUCCESS")

    def compare_rx_tx_packet_End_AS_IPv6_out(self, tx_pkt, rx_pkt):
        """Compare input and output packet after passing End.AS with IPv6

        :param tx_pkt: transmitted packet
        :param rx_pkt: received packet
        """

        # get first (outer) IPv6 header of rx'ed packet
        rx_ip = rx_pkt.getlayer(IPv6)

        tx_ip = tx_pkt.getlayer(IPv6)
        tx_ip2 = tx_pkt.getlayer(IPv6, 2)

        # verify if rx'ed packet has no SRH
        self.assertFalse(rx_pkt.haslayer(IPv6ExtHdrSegmentRouting))

        # the whole rx_ip pkt should be equal to tx_ip2
        # except for the hlim field
        #   -> adjust tx'ed hlim to expected hlim
        tx_ip2.hlim = tx_ip2.hlim - 1

        self.assertEqual(rx_ip, tx_ip2)

        self.logger.debug("packet verification: SUCCESS")

    def compare_rx_tx_packet_End_AS_IPv4_out(self, tx_pkt, rx_pkt):
        """Compare input and output packet after passing End.AS with IPv4

        :param tx_pkt: transmitted packet
        :param rx_pkt: received packet
        """

        # get IPv4 header of rx'ed packet
        rx_ip = rx_pkt.getlayer(IP)

        tx_ip = tx_pkt.getlayer(IPv6)
        tx_ip2 = tx_pkt.getlayer(IP)

        # verify if rx'ed packet has no SRH
        self.assertFalse(rx_pkt.haslayer(IPv6ExtHdrSegmentRouting))

        # the whole rx_ip pkt should be equal to tx_ip2
        # except for the ttl field and ip checksum
        #   -> adjust tx'ed ttl to expected ttl
        tx_ip2.ttl = tx_ip2.ttl - 1
        #   -> set tx'ed ip checksum to None and let scapy recompute
        tx_ip2.chksum = None
        # read back the pkt (with str()) to force computing these fields
        # probably other ways to accomplish this are possible
        tx_ip2 = IP(scapy.compat.raw(tx_ip2))

        self.assertEqual(rx_ip, tx_ip2)

        self.logger.debug("packet verification: SUCCESS")

    def compare_rx_tx_packet_End_AS_L2_out(self, tx_pkt, rx_pkt):
        """Compare input and output packet after passing End.AS with L2

        :param tx_pkt: transmitted packet
        :param rx_pkt: received packet
        """

        # get IPv4 header of rx'ed packet
        rx_eth = rx_pkt.getlayer(Ether)

        tx_ip = tx_pkt.getlayer(IPv6)
        # we can't just get the 2nd Ether layer
        # get the Raw content and dissect it as Ether
        tx_eth1 = Ether(scapy.compat.raw(tx_pkt[Raw]))

        # verify if rx'ed packet has no SRH
        self.assertFalse(rx_pkt.haslayer(IPv6ExtHdrSegmentRouting))

        # the whole rx_eth pkt should be equal to tx_eth1
        self.assertEqual(rx_eth, tx_eth1)

        self.logger.debug("packet verification: SUCCESS")

    def create_stream(self, src_if, dst_if, packet_header, packet_sizes, count):
        """Create SRv6 input packet stream for defined interface.

        :param VppInterface src_if: Interface to create packet stream for
        :param VppInterface dst_if: destination interface of packet stream
        :param packet_header: Layer3 scapy packet headers,
                L2 is added when not provided,
                Raw(payload) with packet_info is added
        :param list packet_sizes: packet stream pckt sizes,sequentially applied
               to packets in stream have
        :param int count: number of packets in packet stream
        :return: list of packets
        """
        self.logger.info("Creating packets")
        pkts = []
        for i in range(0, count - 1):
            payload_info = self.create_packet_info(src_if, dst_if)
            self.logger.debug("Creating packet with index %d" % (payload_info.index))
            payload = self.info_to_payload(payload_info)
            # add L2 header if not yet provided in packet_header
            if packet_header.getlayer(0).name == "Ethernet":
                p = packet_header / Raw(payload)
            else:
                p = (
                    Ether(dst=src_if.local_mac, src=src_if.remote_mac)
                    / packet_header
                    / Raw(payload)
                )
            size = packet_sizes[i % len(packet_sizes)]
            self.logger.debug("Packet size %d" % (size))
            self.extend_packet(p, size)
            # we need to store the packet with the automatic fields computed
            # read back the dumped packet (with str())
            # to force computing these fields
            # probably other ways are possible
            p = Ether(scapy.compat.raw(p))
            payload_info.data = p.copy()
            self.logger.debug(ppp("Created packet:", p))
            pkts.append(p)
        self.logger.info("Done creating packets")
        return pkts

    def send_and_verify_pkts(self, input, pkts, output, compare_func):
        """Send packets and verify received packets using compare_func

        :param input: ingress interface of DUT
        :param pkts: list of packets to transmit
        :param output: egress interface of DUT
        :param compare_func: function to compare in and out packets
        """
        # add traffic stream to input interface
        input.add_stream(pkts)

        # enable capture on all interfaces
        self.pg_enable_capture(self.pg_interfaces)

        # start traffic
        self.logger.info("Starting traffic")
        self.pg_start()

        # get output capture
        self.logger.info("Getting packet capture")
        capture = output.get_capture()

        # assert nothing was captured on input interface
        # input.assert_nothing_captured()

        # verify captured packets
        self.verify_captured_pkts(output, capture, compare_func)

    def create_packet_header_IPv6(self):
        """Create packet header: IPv6 header, UDP header

        :param dst: IPv6 destination address

        IPv6 source address is 1234::1
        IPv6 destination address is 4321::1
        UDP source port and destination port are 1234
        """

        p = IPv6(src="1234::1", dst="4321::1") / UDP(sport=1234, dport=1234)
        return p

    def create_packet_header_IPv6_SRH_IPv6(self, sidlist, segleft):
        """Create packet header: IPv6 encapsulated in SRv6:
        IPv6 header with SRH, IPv6 header, UDP header

        :param list sidlist: segment list of outer IPv6 SRH
        :param int segleft: segments-left field of outer IPv6 SRH

        Outer IPv6 source address is set to 5678::1
        Outer IPv6 destination address is set to sidlist[segleft]
        IPv6 source addresses is 1234::1
        IPv6 destination address is 4321::1
        UDP source port and destination port are 1234
        """

        p = (
            IPv6(src="5678::1", dst=sidlist[segleft])
            / IPv6ExtHdrSegmentRouting(addresses=sidlist, segleft=segleft, nh=41)
            / IPv6(src="1234::1", dst="4321::1")
            / UDP(sport=1234, dport=1234)
        )
        return p

    def create_packet_header_IPv4(self):
        """Create packet header: IPv4 header, UDP header

        :param dst: IPv4 destination address

        IPv4 source address is 123.1.1.1
        IPv4 destination address is 124.1.1.1
        UDP source port and destination port are 1234
        """

        p = IP(src="123.1.1.1", dst="124.1.1.1") / UDP(sport=1234, dport=1234)
        return p

    def create_packet_header_IPv6_SRH_IPv4(self, sidlist, segleft):
        """Create packet header: IPv4 encapsulated in SRv6:
        IPv6 header with SRH, IPv4 header, UDP header

        :param ipv4address dst: inner IPv4 destination address
        :param list sidlist: segment list of outer IPv6 SRH
        :param int segleft: segments-left field of outer IPv6 SRH

        Outer IPv6 destination address is set to sidlist[segleft]
        IPv6 source address is 1234::1
        IPv4 source address is 123.1.1.1
        IPv4 destination address is 124.1.1.1
        UDP source port and destination port are 1234
        """

        p = (
            IPv6(src="1234::1", dst=sidlist[segleft])
            / IPv6ExtHdrSegmentRouting(addresses=sidlist, segleft=segleft, nh=4)
            / IP(src="123.1.1.1", dst="124.1.1.1")
            / UDP(sport=1234, dport=1234)
        )
        return p

    def create_packet_header_L2(self, vlan=0):
        """Create packet header: L2 header

        :param vlan: if vlan!=0 then add 802.1q header
        """
        # Note: the dst addr ('00:55:44:33:22:11') is used in
        # the compare function compare_rx_tx_packet_T_Encaps_L2
        # to detect presence of L2 in SRH payload
        p = Ether(src="00:11:22:33:44:55", dst="00:55:44:33:22:11")
        etype = 0x8137  # IPX
        if vlan:
            # add 802.1q layer
            p /= Dot1Q(vlan=vlan, type=etype)
        else:
            p.type = etype
        return p

    def create_packet_header_IPv6_SRH_L2(self, sidlist, segleft, vlan=0):
        """Create packet header: L2 encapsulated in SRv6:
        IPv6 header with SRH, L2

        :param list sidlist: segment list of outer IPv6 SRH
        :param int segleft: segments-left field of outer IPv6 SRH
        :param vlan: L2 vlan; if vlan!=0 then add 802.1q header

        Outer IPv6 destination address is set to sidlist[segleft]
        IPv6 source address is 1234::1
        """
        eth = Ether(src="00:11:22:33:44:55", dst="00:55:44:33:22:11")
        etype = 0x8137  # IPX
        if vlan:
            # add 802.1q layer
            eth /= Dot1Q(vlan=vlan, type=etype)
        else:
            eth.type = etype

        p = (
            IPv6(src="1234::1", dst=sidlist[segleft])
            / IPv6ExtHdrSegmentRouting(addresses=sidlist, segleft=segleft, nh=143)
            / eth
        )
        return p

    def get_payload_info(self, packet):
        """Extract the payload_info from the packet"""
        # in most cases, payload_info is in packet[Raw]
        # but packet[Raw] gives the complete payload
        # (incl L2 header) for the T.Encaps L2 case
        try:
            payload_info = self.payload_to_info(packet[Raw])

        except:
            # remote L2 header from packet[Raw]:
            # take packet[Raw], convert it to an Ether layer
            # and then extract Raw from it
            payload_info = self.payload_to_info(
                Ether(scapy.compat.raw(packet[Raw]))[Raw]
            )

        return payload_info

    def verify_captured_pkts(self, dst_if, capture, compare_func):
        """
        Verify captured packet stream for specified interface.
        Compare ingress with egress packets using the specified compare fn

        :param dst_if: egress interface of DUT
        :param capture: captured packets
        :param compare_func: function to compare in and out packet
        """
        self.logger.info(
            "Verifying capture on interface %s using function %s"
            % (dst_if.name, compare_func.__name__)
        )

        last_info = dict()
        for i in self.pg_interfaces:
            last_info[i.sw_if_index] = None
        dst_sw_if_index = dst_if.sw_if_index

        for packet in capture:
            try:
                # extract payload_info from packet's payload
                payload_info = self.get_payload_info(packet)
                packet_index = payload_info.index

                self.logger.debug("Verifying packet with index %d" % (packet_index))
                # packet should have arrived on the expected interface
                self.assertEqual(payload_info.dst, dst_sw_if_index)
                self.logger.debug(
                    "Got packet on interface %s: src=%u (idx=%u)"
                    % (dst_if.name, payload_info.src, packet_index)
                )

                # search for payload_info with same src and dst if_index
                # this will give us the transmitted packet
                next_info = self.get_next_packet_info_for_interface2(
                    payload_info.src, dst_sw_if_index, last_info[payload_info.src]
                )
                last_info[payload_info.src] = next_info
                # next_info should not be None
                self.assertTrue(next_info is not None)
                # index of tx and rx packets should be equal
                self.assertEqual(packet_index, next_info.index)
                # data field of next_info contains the tx packet
                txed_packet = next_info.data

                self.logger.debug(
                    ppp("Transmitted packet:", txed_packet)
                )  # ppp=Pretty Print Packet

                self.logger.debug(ppp("Received packet:", packet))

                # compare rcvd packet with expected packet using compare_func
                compare_func(txed_packet, packet)

            except:
                self.logger.error(ppp("Unexpected or invalid packet:", packet))
                raise

        # have all expected packets arrived?
        for i in self.pg_interfaces:
            remaining_packet = self.get_next_packet_info_for_interface2(
                i.sw_if_index, dst_sw_if_index, last_info[i.sw_if_index]
            )
            self.assertTrue(
                remaining_packet is None,
                "Interface %s: Packet expected from interface %s "
                "didn't arrive" % (dst_if.name, i.name),
            )


if __name__ == "__main__":
    unittest.main(testRunner=VppTestRunner)