fib: Decouple source from priority and behaviour
Type: feature
the fib_source_t enum alone no longer defines the priority and
behaviour, instead each source must be allocated these attributes.
This allows the creation of other sources by the plugins (and
soon over the API).
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I890ee820fbc16079ee417ea1fbc163192806e853
diff --git a/src/vnet/fib/fib_entry.h b/src/vnet/fib/fib_entry.h
index f0e6e8d..b97c80f 100644
--- a/src/vnet/fib/fib_entry.h
+++ b/src/vnet/fib/fib_entry.h
@@ -17,6 +17,7 @@
#define __FIB_ENTRY_H__
#include <vnet/fib/fib_node.h>
+#include <vnet/fib/fib_source.h>
#include <vnet/adj/adj.h>
#include <vnet/ip/ip.h>
#include <vnet/dpo/dpo.h>
@@ -26,176 +27,6 @@
* The sources are defined here with their relative priority order.
* The lower the value the higher the priority
*/
-typedef enum fib_source_t_ {
- /**
- * An invalid source
- * This is not a real source, so don't use it to source a prefix.
- * It exists here to provide a value for inexistant/uninitialized source
- */
- FIB_SOURCE_INVALID = 0,
- /**
- * Marker. Add new values after this one.
- */
- FIB_SOURCE_FIRST,
- /**
- * Special sources. These are for entries that are added to all
- * FIBs by default, and should never be over-ridden (hence they
- * are the highest priority)
- */
- FIB_SOURCE_SPECIAL = FIB_SOURCE_FIRST,
- /**
- * Classify. A route that links directly to a classify adj
- */
- FIB_SOURCE_CLASSIFY,
- /**
- * A route the is being 'proxied' on behalf of another device
- */
- FIB_SOURCE_PROXY,
- /**
- * Route added as a result of interface configuration.
- * this will also come from the API/CLI, but the distinction is
- * that is from confiiguration on an interface, not a 'ip route' command
- */
- FIB_SOURCE_INTERFACE,
- /**
- * SRv6 and SR-MPLS
- */
- FIB_SOURCE_SR,
- /**
- * A high priority source a plugin can use
- */
- FIB_SOURCE_PLUGIN_HI,
- /**
- * From the BIER subsystem
- */
- FIB_SOURCE_BIER,
- /**
- * From 6RD.
- */
- FIB_SOURCE_6RD,
- /**
- * From the control plane API
- */
- FIB_SOURCE_API,
- /**
- * From the CLI.
- */
- FIB_SOURCE_CLI,
- /**
- * A low (below routing) priority source a plugin can use
- */
- FIB_SOURCE_PLUGIN_LOW,
- /**
- * LISP
- */
- FIB_SOURCE_LISP,
- /**
- * IPv[46] Mapping
- */
- FIB_SOURCE_MAP,
- /**
- * DHCP
- */
- FIB_SOURCE_DHCP,
- /**
- * IPv6 Proxy ND
- */
- FIB_SOURCE_IP6_ND_PROXY,
- /**
- * IPv6 ND (seen in the link-local tables)
- */
- FIB_SOURCE_IP6_ND,
- /**
- * Adjacency source.
- * routes created as a result of ARP/ND entries. This is lower priority
- * then the API/CLI. This is on purpose. trust me.
- */
- FIB_SOURCE_ADJ,
- /**
- * MPLS label. The prefix has been assigned a local label. This source
- * never provides forwarding information, instead it acts as a place-holder
- * so the association of label to prefix can be maintained
- */
- FIB_SOURCE_MPLS,
- /**
- * Attached Export source.
- * routes created as a result of attahced export. routes thus sourced
- * will be present in the export tables
- */
- FIB_SOURCE_AE,
- /**
- * Recursive resolution source.
- * Used to install an entry that is the resolution traget of another.
- */
- FIB_SOURCE_RR,
- /**
- * uRPF bypass/exemption.
- * Used to install an entry that is exempt from the loose uRPF check
- */
- FIB_SOURCE_URPF_EXEMPT,
- /**
- * The default route source.
- * The default route is always added to the FIB table (like the
- * special sources) but we need to be able to over-ride it with
- * 'ip route' sources when provided
- */
- FIB_SOURCE_DEFAULT_ROUTE,
- /**
- * The interpose source.
- * This is not a real source, so don't use it to source a prefix.
- * It exists here to provide a value against which to register to the
- * VFT for providing the interpose actions to a real source.
- */
- FIB_SOURCE_INTERPOSE,
- /**
- * Marker. add new entries before this one.
- */
- FIB_SOURCE_LAST = FIB_SOURCE_INTERPOSE,
-} __attribute__ ((packed)) fib_source_t;
-
-STATIC_ASSERT (sizeof(fib_source_t) == 1,
- "FIB too many sources");
-
-/**
- * The maximum number of sources
- */
-#define FIB_SOURCE_MAX (FIB_SOURCE_LAST+1)
-
-#define FIB_SOURCES { \
- [FIB_SOURCE_INVALID] = "invalid", \
- [FIB_SOURCE_SPECIAL] = "special", \
- [FIB_SOURCE_INTERFACE] = "interface", \
- [FIB_SOURCE_PROXY] = "proxy", \
- [FIB_SOURCE_BIER] = "BIER", \
- [FIB_SOURCE_6RD] = "6RD", \
- [FIB_SOURCE_API] = "API", \
- [FIB_SOURCE_CLI] = "CLI", \
- [FIB_SOURCE_ADJ] = "adjacency", \
- [FIB_SOURCE_MAP] = "MAP", \
- [FIB_SOURCE_SR] = "SR", \
- [FIB_SOURCE_LISP] = "LISP", \
- [FIB_SOURCE_CLASSIFY] = "classify", \
- [FIB_SOURCE_DHCP] = "DHCP", \
- [FIB_SOURCE_IP6_ND_PROXY] = "IPv6-proxy-nd", \
- [FIB_SOURCE_IP6_ND] = "IPv6-nd", \
- [FIB_SOURCE_RR] = "recursive-resolution", \
- [FIB_SOURCE_AE] = "attached_export", \
- [FIB_SOURCE_MPLS] = "mpls", \
- [FIB_SOURCE_URPF_EXEMPT] = "urpf-exempt", \
- [FIB_SOURCE_DEFAULT_ROUTE] = "default-route", \
- [FIB_SOURCE_PLUGIN_HI] = "plugin-hi", \
- [FIB_SOURCE_PLUGIN_LOW] = "plugin-low", \
- [FIB_SOURCE_INTERPOSE] = "interpose", \
-}
-
-#define FOR_EACH_FIB_SOURCE(_item) \
- for (_item = FIB_SOURCE_FIRST; _item < FIB_SOURCE_MAX; _item++)
-
-/**
- * The different sources that can create a route.
- * The sources are defined here with their relative priority order.
- * The lower the value the higher the priority
- */
typedef enum fib_entry_attribute_t_ {
/**
* Marker. Add new values after this one.