blob: ddc00e537c2374926687e558c50ef610a23fa38e [file] [log] [blame]
/*
* Copyright (c) 2016 Cisco and/or its affiliates.
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef __FIB_TABLE_H__
#define __FIB_TABLE_H__
#include <vnet/ip/ip.h>
#include <vnet/adj/adj.h>
#include <vnet/fib/fib_entry.h>
#include <vnet/mpls/mpls.h>
#include <vnet/mpls/packet.h>
/**
* Keep a lock per-source and a total
*/
#define FIB_TABLE_N_LOCKS (FIB_SOURCE_MAX+1)
#define FIB_TABLE_TOTAL_LOCKS FIB_SOURCE_MAX
/**
* Flags for the source data
*/
typedef enum fib_table_attribute_t_ {
/**
* Marker. Add new values after this one.
*/
FIB_TABLE_ATTRIBUTE_FIRST,
/**
* the table is for IP6 link local addresses
*/
FIB_TABLE_ATTRIBUTE_IP6_LL = FIB_TABLE_ATTRIBUTE_FIRST,
/**
* Marker. add new entries before this one.
*/
FIB_TABLE_ATTRIBUTE_LAST = FIB_TABLE_ATTRIBUTE_IP6_LL,
} fib_table_attribute_t;
#define FIB_TABLE_ATTRIBUTE_MAX (FIB_TABLE_ATTRIBUTE_LAST+1)
#define FIB_TABLE_ATTRIBUTES { \
[FIB_TABLE_ATTRIBUTE_IP6_LL] = "ip6-ll", \
}
#define FOR_EACH_FIB_TABLE_ATTRIBUTE(_item) \
for (_item = FIB_TABLE_ATTRIBUTE_FIRST; \
_item < FIB_TABLE_ATTRIBUTE_MAX; \
_item++)
typedef enum fib_table_flags_t_ {
FIB_TABLE_FLAG_NONE = 0,
FIB_TABLE_FLAG_IP6_LL = (1 << FIB_TABLE_ATTRIBUTE_IP6_LL),
} __attribute__ ((packed)) fib_table_flags_t;
/**
* @brief
* A protocol Independent FIB table
*/
typedef struct fib_table_t_
{
/**
* Which protocol this table serves. Used to switch on the union above.
*/
fib_protocol_t ft_proto;
/**
* Table flags
*/
fib_table_flags_t ft_flags;
/**
* per-source number of locks on the table
*/
u16 ft_locks[FIB_TABLE_N_LOCKS];
/**
* Table ID (hash key) for this FIB.
*/
u32 ft_table_id;
/**
* Index into FIB vector.
*/
fib_node_index_t ft_index;
/**
* flow hash configuration
*/
u32 ft_flow_hash_config;
/**
* Per-source route counters
*/
u32 ft_src_route_counts[FIB_SOURCE_MAX];
/**
* Total route counters
*/
u32 ft_total_route_counts;
/**
* Table description
*/
u8* ft_desc;
} fib_table_t;
/**
* @brief
* Format the description/name of the table
*/
extern u8* format_fib_table_name(u8* s, va_list *ap);
/**
* @brief
* Perfom a longest prefix match in the non-forwarding table
*
* @param fib_index
* The index of the FIB
*
* @param prefix
* The prefix to lookup
*
* @return
* The index of the fib_entry_t for the best match, which may be the default route
*/
extern fib_node_index_t fib_table_lookup(u32 fib_index,
const fib_prefix_t *prefix);
/**
* @brief
* Perfom an exact match in the non-forwarding table
*
* @param fib_index
* The index of the FIB
*
* @param prefix
* The prefix to lookup
*
* @return
* The index of the fib_entry_t for the exact match, or INVALID
* is there is no match.
*/
extern fib_node_index_t fib_table_lookup_exact_match(u32 fib_index,
const fib_prefix_t *prefix);
/**
* @brief
* Get the less specific (covering) prefix
*
* @param fib_index
* The index of the FIB
*
* @param prefix
* The prefix to lookup
*
* @return
* The index of the less specific fib_entry_t.
*/
extern fib_node_index_t fib_table_get_less_specific(u32 fib_index,
const fib_prefix_t *prefix);
/**
* @brief
* Add a 'special' entry to the FIB.
* A special entry is an entry that the FIB is not expect to resolve
* via the usual mechanisms (i.e. recurisve or neighbour adj DB lookup).
* Instead the will link to a DPO valid for the source and/or the flags.
* This add is reference counting per-source. So n 'removes' are required
* for n 'adds', if the entry is no longer required.
* If the source needs to provide non-default forwarding use:
* fib_table_entry_special_dpo_add()
*
* @param fib_index
* The index of the FIB
*
* @param prefix
* The prefix to add
*
* @param source
* The ID of the client/source adding the entry.
*
* @param flags
* Flags for the entry.
*
* @return
* the index of the fib_entry_t that is created (or exists already).
*/
extern fib_node_index_t fib_table_entry_special_add(u32 fib_index,
const fib_prefix_t *prefix,
fib_source_t source,
fib_entry_flag_t flags);
/**
* @brief
* Add a 'special' entry to the FIB that links to the DPO passed
* A special entry is an entry that the FIB is not expect to resolve
* via the usual mechanisms (i.e. recurisve or neighbour adj DB lookup).
* Instead the client/source provides the DPO to link to.
* This add is reference counting per-source. So n 'removes' are required
* for n 'adds', if the entry is no longer required.
*
* @param fib_index
* The index of the FIB
*
* @param prefix
* The prefix to add
*
* @param source
* The ID of the client/source adding the entry.
*
* @param flags
* Flags for the entry.
*
* @param dpo
* The DPO to link to.
*
* @return
* the index of the fib_entry_t that is created (or existed already).
*/
extern fib_node_index_t fib_table_entry_special_dpo_add(u32 fib_index,
const fib_prefix_t *prefix,
fib_source_t source,
fib_entry_flag_t stype,
const dpo_id_t *dpo);
/**
* @brief
* Update a 'special' entry to the FIB that links to the DPO passed
* A special entry is an entry that the FIB is not expect to resolve
* via the usual mechanisms (i.e. recurisve or neighbour adj DB lookup).
* Instead the client/source provides the DPO to link to.
* Special entries are add/remove reference counted per-source. So n
* 'removes' are required for n 'adds', if the entry is no longer required.
* An 'update' is an 'add' if no 'add' has already been called, otherwise an 'add'
* is therefore assumed to act on the reference instance of that add.
*
* @param fib_entry_index
* The index of the FIB entry to update
*
* @param source
* The ID of the client/source adding the entry.
*
* @param flags
* Flags for the entry.
*
* @param dpo
* The DPO to link to.
*
* @return
* the index of the fib_entry_t that is created (or existed already).
*/
extern fib_node_index_t fib_table_entry_special_dpo_update (u32 fib_index,
const fib_prefix_t *prefix,
fib_source_t source,
fib_entry_flag_t stype,
const dpo_id_t *dpo);
/**
* @brief
* Remove a 'special' entry from the FIB.
* This add is reference counting per-source. So n 'removes' are required
* for n 'adds', if the entry is no longer required.
*
* @param fib_index
* The index of the FIB
*
* @param prefix
* The prefix to remove
*
* @param source
* The ID of the client/source adding the entry.
*
*/
extern void fib_table_entry_special_remove(u32 fib_index,
const fib_prefix_t *prefix,
fib_source_t source);
/**
* @brief
* Add one path to an entry (aka route) in the FIB. If the entry does not
* exist, it will be created.
* See the documentation for fib_route_path_t for more descirptions of
* the path parameters.
*
* @param fib_index
* The index of the FIB
*
* @param prefix
* The prefix for the entry to add
*
* @param source
* The ID of the client/source adding the entry.
*
* @param flags
* Flags for the entry.
*
* @paran next_hop_proto
* The protocol of the next hop. This cannot be derived in the event that
* the next hop is all zeros.
*
* @param next_hop
* The address of the next-hop.
*
* @param sw_if_index
* The index of the interface.
*
* @param next_hop_fib_index,
* The fib index of the next-hop for recursive resolution
*
* @param next_hop_weight
* [un]equal cost path weight
*
* @param next_hop_label_stack
* The path's out-going label stack. NULL is there is none.
*
* @param pf
* Flags for the path
*
* @return
* the index of the fib_entry_t that is created (or existed already).
*/
extern fib_node_index_t fib_table_entry_path_add(u32 fib_index,
const fib_prefix_t *prefix,
fib_source_t source,
fib_entry_flag_t flags,
dpo_proto_t next_hop_proto,
const ip46_address_t *next_hop,
u32 next_hop_sw_if_index,
u32 next_hop_fib_index,
u32 next_hop_weight,
mpls_label_t *next_hop_label_stack,
fib_route_path_flags_t pf);
/**
* @brief
* Add n paths to an entry (aka route) in the FIB. If the entry does not
* exist, it will be created.
* See the documentation for fib_route_path_t for more descirptions of
* the path parameters.
*
* @param fib_index
* The index of the FIB
*
* @param prefix
* The prefix for the entry to add
*
* @param source
* The ID of the client/source adding the entry.
*
* @param flags
* Flags for the entry.
*
* @param rpaths
* A vector of paths. Not const since they may be modified.
*
* @return
* the index of the fib_entry_t that is created (or existed already).
*/
extern fib_node_index_t fib_table_entry_path_add2(u32 fib_index,
const fib_prefix_t *prefix,
fib_source_t source,
fib_entry_flag_t flags,
fib_route_path_t *rpath);
/**
* @brief
* remove one path to an entry (aka route) in the FIB. If this is the entry's
* last path, then the entry will be removed, unless it has other sources.
* See the documentation for fib_route_path_t for more descirptions of
* the path parameters.
*
* @param fib_index
* The index of the FIB
*
* @param prefix
* The prefix for the entry to add
*
* @param source
* The ID of the client/source adding the entry.
*
* @paran next_hop_proto
* The protocol of the next hop. This cannot be derived in the event that
* the next hop is all zeros.
*
* @param next_hop
* The address of the next-hop.
*
* @param sw_if_index
* The index of the interface.
*
* @param next_hop_fib_index,
* The fib index of the next-hop for recursive resolution
*
* @param next_hop_weight
* [un]equal cost path weight
*
* @param pf
* Flags for the path
*/
extern void fib_table_entry_path_remove(u32 fib_index,
const fib_prefix_t *prefix,
fib_source_t source,
dpo_proto_t next_hop_proto,
const ip46_address_t *next_hop,
u32 next_hop_sw_if_index,
u32 next_hop_fib_index,
u32 next_hop_weight,
fib_route_path_flags_t pf);
/**
* @brief
* Remove n paths to an entry (aka route) in the FIB. If this is the entry's
* last path, then the entry will be removed, unless it has other sources.
* See the documentation for fib_route_path_t for more descirptions of
* the path parameters.
*
* @param fib_index
* The index of the FIB
*
* @param prefix
* The prefix for the entry to add
*
* @param source
* The ID of the client/source adding the entry.
*
* @param rpaths
* A vector of paths.
*/
extern void fib_table_entry_path_remove2(u32 fib_index,
const fib_prefix_t *prefix,
fib_source_t source,
fib_route_path_t *paths);
/**
* @brief
* Update an entry to have a new set of paths. If the entry does not
* exist, it will be created.
* The difference between an 'path-add' and an update, is that path-add is
* an incremental addition of paths, whereas an update is a wholesale swap.
*
* @param fib_index
* The index of the FIB
*
* @param prefix
* The prefix for the entry to add
*
* @param source
* The ID of the client/source adding the entry.
*
* @param rpaths
* A vector of paths. Not const since they may be modified.
*
* @return
* the index of the fib_entry_t that is created (or existed already).
*/
extern fib_node_index_t fib_table_entry_update(u32 fib_index,
const fib_prefix_t *prefix,
fib_source_t source,
fib_entry_flag_t flags,
fib_route_path_t *paths);
/**
* @brief
* Update the entry to have just one path. If the entry does not
* exist, it will be created.
* See the documentation for fib_route_path_t for more descirptions of
* the path parameters.
*
* @param fib_index
* The index of the FIB
*
* @param prefix
* The prefix for the entry to add
*
* @param source
* The ID of the client/source adding the entry.
*
* @param flags
* Flags for the entry.
*
* @paran next_hop_proto
* The protocol of the next hop. This cannot be derived in the event that
* the next hop is all zeros.
*
* @param next_hop
* The address of the next-hop.
*
* @param sw_if_index
* The index of the interface.
*
* @param next_hop_fib_index,
* The fib index of the next-hop for recursive resolution
*
* @param next_hop_weight
* [un]equal cost path weight
*
* @param next_hop_label_stack
* The path's out-going label stack. NULL is there is none.
*
* @param pf
* Flags for the path
*
* @return
* the index of the fib_entry_t that is created (or existed already).
*/
extern fib_node_index_t fib_table_entry_update_one_path(u32 fib_index,
const fib_prefix_t *prefix,
fib_source_t source,
fib_entry_flag_t flags,
dpo_proto_t next_hop_proto,
const ip46_address_t *next_hop,
u32 next_hop_sw_if_index,
u32 next_hop_fib_index,
u32 next_hop_weight,
mpls_label_t *next_hop_label_stack,
fib_route_path_flags_t pf);
/**
* @brief
* Add a MPLS local label for the prefix/route. If the entry does not
* exist, it will be created. In theory more than one local label can be
* added, but this is not yet supported.
*
* @param fib_index
* The index of the FIB
*
* @param prefix
* The prefix for the entry to which to add the label
*
* @param label
* The MPLS label to add
*
* @return
* the index of the fib_entry_t that is created (or existed already).
*/
extern fib_node_index_t fib_table_entry_local_label_add(u32 fib_index,
const fib_prefix_t *prefix,
mpls_label_t label);
/**
* @brief
* remove a MPLS local label for the prefix/route.
*
* @param fib_index
* The index of the FIB
*
* @param prefix
* The prefix for the entry to which to add the label
*
* @param label
* The MPLS label to add
*/
extern void fib_table_entry_local_label_remove(u32 fib_index,
const fib_prefix_t *prefix,
mpls_label_t label);
/**
* @brief
* Delete a FIB entry. If the entry has no more sources, then it is
* removed from the table.
*
* @param fib_index
* The index of the FIB
*
* @param prefix
* The prefix for the entry to remove
*
* @param source
* The ID of the client/source adding the entry.
*/
extern void fib_table_entry_delete(u32 fib_index,
const fib_prefix_t *prefix,
fib_source_t source);
/**
* @brief
* Delete a FIB entry. If the entry has no more sources, then it is
* removed from the table.
*
* @param entry_index
* The index of the FIB entry
*
* @param source
* The ID of the client/source adding the entry.
*/
extern void fib_table_entry_delete_index(fib_node_index_t entry_index,
fib_source_t source);
/**
* @brief
* Flush all entries from a table for the source
*
* @param fib_index
* The index of the FIB
*
* @paran proto
* The protocol of the entries in the table
*
* @param source
* the source to flush
*/
extern void fib_table_flush(u32 fib_index,
fib_protocol_t proto,
fib_source_t source);
/**
* @brief
* Get the index of the FIB bound to the interface
*
* @paran proto
* The protocol of the FIB (and thus the entries therein)
*
* @param sw_if_index
* The interface index
*
* @return fib_index
* The index of the FIB
*/
extern u32 fib_table_get_index_for_sw_if_index(fib_protocol_t proto,
u32 sw_if_index);
/**
* @brief
* Get the Table-ID of the FIB bound to the interface
*
* @paran proto
* The protocol of the FIB (and thus the entries therein)
*
* @param sw_if_index
* The interface index
*
* @return fib_index
* The tableID of the FIB
*/
extern u32 fib_table_get_table_id_for_sw_if_index(fib_protocol_t proto,
u32 sw_if_index);
/**
* @brief
* Get the index of the FIB for a Table-ID. This DOES NOT create the
* FIB if it does not exist.
*
* @paran proto
* The protocol of the FIB (and thus the entries therein)
*
* @param table-id
* The Table-ID
*
* @return fib_index
* The index of the FIB, which may be INVALID.
*/
extern u32 fib_table_find(fib_protocol_t proto, u32 table_id);
/**
* @brief
* Get the index of the FIB for a Table-ID. This DOES create the
* FIB if it does not exist.
*
* @paran proto
* The protocol of the FIB (and thus the entries therein)
*
* @param table-id
* The Table-ID
*
* @return fib_index
* The index of the FIB
*
* @param source
* The ID of the client/source.
*/
extern u32 fib_table_find_or_create_and_lock(fib_protocol_t proto,
u32 table_id,
fib_source_t source);
/**
* @brief
* Get the index of the FIB for a Table-ID. This DOES create the
* FIB if it does not exist.
*
* @paran proto
* The protocol of the FIB (and thus the entries therein)
*
* @param table-id
* The Table-ID
*
* @return fib_index
* The index of the FIB
*
* @param source
* The ID of the client/source.
*
* @param name
* The client is choosing the name they want the table to have
*/
extern u32 fib_table_find_or_create_and_lock_w_name(fib_protocol_t proto,
u32 table_id,
fib_source_t source,
const u8 *name);
/**
* @brief
* Create a new table with no table ID. This means it does not get
* added to the hash-table and so can only be found by using the index returned.
*
* @paran proto
* The protocol of the FIB (and thus the entries therein)
*
* @param fmt
* A string to describe the table
*
* @param source
* The ID of the client/source.
*
* @return fib_index
* The index of the FIB
*/
extern u32 fib_table_create_and_lock(fib_protocol_t proto,
fib_source_t source,
const char *const fmt,
...);
/**
* @brief
* Get the flow hash configured used by the table
*
* @param fib_index
* The index of the FIB
*
* @paran proto
* The protocol the packets the flow hash will be calculated for.
*
* @return The flow hash config
*/
extern flow_hash_config_t fib_table_get_flow_hash_config(u32 fib_index,
fib_protocol_t proto);
/**
* @brief
* Get the flow hash configured used by the protocol
*
* @paran proto
* The protocol of the FIB (and thus the entries therein)
*
* @return The flow hash config
*/
extern flow_hash_config_t fib_table_get_default_flow_hash_config(fib_protocol_t proto);
/**
* @brief
* Set the flow hash configured used by the table
*
* @param fib_index
* The index of the FIB
*
* @paran proto
* The protocol of the FIB (and thus the entries therein)
*
* @param hash_config
* The flow-hash config to set
*
* @return none
*/
extern void fib_table_set_flow_hash_config(u32 fib_index,
fib_protocol_t proto,
flow_hash_config_t hash_config);
/**
* @brief
* Take a reference counting lock on the table
*
* @param fib_index
* The index of the FIB
*
* @paran proto
* The protocol of the FIB (and thus the entries therein)
*
* @param source
* The ID of the client/source.
*/
extern void fib_table_unlock(u32 fib_index,
fib_protocol_t proto,
fib_source_t source);
/**
* @brief
* Release a reference counting lock on the table. When the last lock
* has gone. the FIB is deleted.
*
* @param fib_index
* The index of the FIB
*
* @paran proto
* The protocol of the FIB (and thus the entries therein)
*
* @param source
* The ID of the client/source.
*/
extern void fib_table_lock(u32 fib_index,
fib_protocol_t proto,
fib_source_t source);
/**
* @brief
* Return the number of entries in the FIB added by a given source.
*
* @param fib_index
* The index of the FIB
*
* @paran proto
* The protocol of the FIB (and thus the entries therein)
*
* @return number of sourced entries.
*/
extern u32 fib_table_get_num_entries(u32 fib_index,
fib_protocol_t proto,
fib_source_t source);
/**
* @brief
* Get a pointer to a FIB table
*/
extern fib_table_t *fib_table_get(fib_node_index_t index,
fib_protocol_t proto);
/**
* @brief return code controlling how a table walk proceeds
*/
typedef enum fib_table_walk_rc_t_
{
/**
* Continue on to the next entry
*/
FIB_TABLE_WALK_CONTINUE,
/**
* Do no traverse down this sub-tree
*/
FIB_TABLE_WALK_SUB_TREE_STOP,
/**
* Stop the walk completely
*/
FIB_TABLE_WALK_STOP,
} fib_table_walk_rc_t;
/**
* @brief Call back function when walking entries in a FIB table
*/
typedef fib_table_walk_rc_t (*fib_table_walk_fn_t)(fib_node_index_t fei,
void *ctx);
/**
* @brief Walk all entries in a FIB table
* N.B: This is NOT safe to deletes. If you need to delete walk the whole
* table and store elements in a vector, then delete the elements
*/
extern void fib_table_walk(u32 fib_index,
fib_protocol_t proto,
fib_table_walk_fn_t fn,
void *ctx);
/**
* @brief Walk all entries in a sub-tree FIB table. The 'root' paraneter
* is the prefix at the root of the sub-tree.
* N.B: This is NOT safe to deletes. If you need to delete walk the whole
* table and store elements in a vector, then delete the elements
*/
extern void fib_table_sub_tree_walk(u32 fib_index,
fib_protocol_t proto,
const fib_prefix_t *root,
fib_table_walk_fn_t fn,
void *ctx);
/**
* @brief format (display) the memory used by the FIB tables
*/
extern u8 *format_fib_table_memory(u8 *s, va_list *args);
#endif