docs: better docs, mv doxygen to sphinx
This patch refactors the VPP sphinx docs
in order to make it easier to consume
for external readers as well as VPP developers.
It also makes sphinx the single source
of documentation, which simplifies maintenance
and operation.
Most important updates are:
- reformat the existing documentation as rst
- split RELEASE.md and move it into separate rst files
- remove section 'events'
- remove section 'archive'
- remove section 'related projects'
- remove section 'feature by release'
- remove section 'Various links'
- make (Configuration reference, CLI docs,
developer docs) top level items in the list
- move 'Use Cases' as part of 'About VPP'
- move 'Troubleshooting' as part of 'Getting Started'
- move test framework docs into 'Developer Documentation'
- add a 'Contributing' section for gerrit,
docs and other contributer related infos
- deprecate doxygen and test-docs targets
- redirect the "make doxygen" target to "make docs"
Type: refactor
Change-Id: I552a5645d5b7964d547f99b1336e2ac24e7c209f
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
diff --git a/docs/usecases/contiv/SINGLE_NIC_SETUP.rst b/docs/usecases/contiv/SINGLE_NIC_SETUP.rst
new file mode 100644
index 0000000..43d4c3f
--- /dev/null
+++ b/docs/usecases/contiv/SINGLE_NIC_SETUP.rst
@@ -0,0 +1,140 @@
+Setting up a Node with a Single NIC
+===================================
+
+Installing the STN Daemon
+-------------------------
+
+The STN (Steal the NIC) daemon must be installed on every node in the
+cluster that has only one NIC. The STN daemon installation(*) should be
+performed before deployment of the Contiv-VPP plugin.
+
+\* Docker daemon must be present when installing STN. Also, Docker must
+be configured to allow shared mount. On CentOS, this may not be the case
+by default. You can enable it by following the instructions at
+https://docs.portworx.com/knowledgebase/shared-mount-propagation.html.
+
+Run as root (not using sudo):
+
+::
+
+ bash <(curl -s https://raw.githubusercontent.com/contiv/vpp/master/k8s/stn-install.sh)
+
+The install script should output the following:
+
+::
+
+ Installing Contiv STN daemon.
+ Starting contiv-stn Docker container:
+ 550334308f85f05b2690f5cfb5dd945bd9c501ab9d074231f15c14d7098ef212
+
+Check that the STN daemon is running:
+
+::
+
+ docker ps -a
+ CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
+ 550334308f85 contivvpp/stn "/stn" 33 seconds ago Up 33 seconds contiv-stn
+
+Check that the STN daemon is operational:
+
+::
+
+ docker logs contiv-stn
+
+The expected logs would look like the following excerpt:
+
+::
+
+ 2018/02/23 10:08:34 Starting the STN GRPC server at port 50051
+
+For more details, please read the Go documentation for
+`contiv-stn <https://github.com/contiv/vpp/blob/master/cmd/contiv-stn/doc.go>`__
+and
+`contiv-init <https://github.com/contiv/vpp/blob/master/cmd/contiv-init/doc.go>`__.
+
+Creating a VPP Interface Configuration
+--------------------------------------
+
+Create the VPP configuration for the hardware interface as described
+`here <https://github.com/contiv/vpp/blob/master/docs/VPP_CONFIG.md#single-nic-configuration>`__.
+
+Configuring STN in Contiv-VPP K8s Deployment Files
+--------------------------------------------------
+
+The STN feature is disabled by default. It needs to be enabled either
+globally, or individually for every node in the cluster.
+
+Global Configuration:
+~~~~~~~~~~~~~~~~~~~~~
+
+Global configuration is used in homogeneous environments where all nodes
+in a given cluster have the same hardware configuration, for example
+only a single Network Adapter. To enable the STN feature globally, put
+the ``StealFirstNIC: True`` stanza into the [``contiv-vpp.yaml``][1]
+deployment file, for example:
+
+::
+
+ data:
+ contiv.yaml: |-
+ TCPstackDisabled: true
+ ...
+ StealFirstNIC: True
+ ...
+ IPAMConfig:
+
+Setting ``StealFirstNIC`` to ``True`` will tell the STN Daemon on every
+node in the cluster to steal the first NIC from the kernel and assign it
+to VPP. Note that the Network Adapters on different nodes do not need to
+be of the same type. You still need to create the respective vswitch
+configurations on every node in the cluster, as shown
+[above](#creating-a-vpp-interface-configuration).
+
+Individual Configuration:
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Individual configuration is used in heterogeneous environments where
+each node in a given cluster may be configured differently. To enable
+the STN feature for a specific node in the cluster, put the following
+stanza into its Node Configuration in the [``contiv-vpp.yaml``][1]
+deployment file, for example:
+
+::
+
+ ...
+ NodeConfig:
+ - NodeName: "ubuntu-1"
+ StealInterface: "enp0s8"
+ - NodeName: "ubuntu-2"
+ StealInterface: "enp0s8"
+ ...
+
+Note that you still have to create the vswitch configuration on the node
+as shown `here <#creating-a-vpp-interface-configuration>`__.
+
+Uninstalling the STN Daemon
+---------------------------
+
+Run as root (not using sudo):
+
+::
+
+ bash <(curl -s https://raw.githubusercontent.com/contiv/vpp/master/k8s/stn-install.sh) --uninstall
+
+The install script should output the following:
+
+::
+
+ Uninstalling Contiv STN daemon.
+ Stopping contiv-stn Docker container:
+ contiv-stn
+ contiv-stn
+ contiv-stn
+
+Make sure that the STN daemon has been uninstalled:
+
+::
+
+ docker ps -q -f name=contiv-stn
+
+No containers should be listed.