Gitiles
Code Review Sign In
gerrit.nordix.org / fdio / vpp / a2b358b1faf6e762e1d29a931d83c7735ac9a77d / . / src / vnet / interface_cli.c
blob: 452849eaf9f694c64ec9869fdb669d5495b3b8f6 [file] [log] [blame]
/*
* Copyright (c) 2015 Cisco and/or its affiliates.
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* interface_cli.c: interface CLI
*
* Copyright (c) 2008 Eliot Dresselhaus
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sublicense, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
* LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
* OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
* WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/
/**
* @file
* @brief Interface CLI.
*
* Source code for several CLI interface commands.
*
*/
#include <vnet/vnet.h>
#include <vnet/ip/ip.h>
#include <vppinfra/bitmap.h>
#include <vnet/fib/ip4_fib.h>
#include <vnet/fib/ip6_fib.h>
#include <vnet/l2/l2_output.h>
#include <vnet/l2/l2_input.h>
#include <vnet/classify/vnet_classify.h>
#include <vnet/interface/rx_queue_funcs.h>
#include <vnet/interface/tx_queue_funcs.h>
#include <vnet/hash/hash.h>
static int
compare_interface_names (void *a1, void *a2)
{
u32 *hi1 = a1;
u32 *hi2 = a2;
return vnet_hw_interface_compare (vnet_get_main (), *hi1, *hi2);
}
static clib_error_t *
show_or_clear_hw_interfaces (vlib_main_t * vm,
unformat_input_t * input,
vlib_cli_command_t * cmd, int is_show)
{
clib_error_t *error = 0;
unformat_input_t _line_input, *line_input = &_line_input;
vnet_main_t *vnm = vnet_get_main ();
vnet_interface_main_t *im = &vnm->interface_main;
vnet_hw_interface_t *hi;
u32 hw_if_index, *hw_if_indices = 0;
int i, verbose = -1, show_bond = 0;
if (!unformat_user (input, unformat_line_input, line_input))
return 0;
while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
{
/* See if user wants to show a specific interface. */
if (unformat (line_input, "%U", unformat_vnet_hw_interface, vnm,
&hw_if_index))
vec_add1 (hw_if_indices, hw_if_index);
/* See if user wants to show an interface with a specific hw_if_index. */
else if (unformat (line_input, "%u", &hw_if_index))
vec_add1 (hw_if_indices, hw_if_index);
else if (unformat (line_input, "verbose"))
verbose = 1; /* this is also the default */
else if (unformat (line_input, "detail"))
verbose = 2;
else if (unformat (line_input, "brief"))
verbose = 0;
else if (unformat (line_input, "bond"))
{
show_bond = 1;
if (verbose < 0)
verbose = 0; /* default to brief for link bonding */
}
else
{
error = clib_error_return (0, "unknown input `%U'",
format_unformat_error, line_input);
unformat_free (line_input);
goto done;
}
}
unformat_free (line_input);
/* Gather interfaces. */
if (vec_len (hw_if_indices) == 0)
pool_foreach (hi, im->hw_interfaces)
vec_add1 (hw_if_indices, hi - im->hw_interfaces);
if (verbose < 0)
verbose = 1; /* default to verbose (except bond) */
if (is_show)
{
/* Sort by name. */
vec_sort_with_function (hw_if_indices, compare_interface_names);
vlib_cli_output (vm, "%U\n", format_vnet_hw_interface, vnm, 0, verbose);
for (i = 0; i < vec_len (hw_if_indices); i++)
{
hi = vnet_get_hw_interface (vnm, hw_if_indices[i]);
if (show_bond == 0) /* show all interfaces */
vlib_cli_output (vm, "%U\n", format_vnet_hw_interface, vnm,
hi, verbose);
else if ((hi->bond_info) &&
(hi->bond_info != VNET_HW_INTERFACE_BOND_INFO_SLAVE))
{ /* show only bonded interface and all its slave interfaces */
int hw_idx;
vnet_hw_interface_t *shi;
vlib_cli_output (vm, "%U\n", format_vnet_hw_interface, vnm,
hi, verbose);
/* *INDENT-OFF* */
clib_bitmap_foreach (hw_idx, hi->bond_info)
{
shi = vnet_get_hw_interface(vnm, hw_idx);
vlib_cli_output (vm, "%U\n",
format_vnet_hw_interface, vnm, shi, verbose);
}
/* *INDENT-ON* */
}
}
}
else
{
for (i = 0; i < vec_len (hw_if_indices); i++)
{
vnet_device_class_t *dc;
hi = vnet_get_hw_interface (vnm, hw_if_indices[i]);
dc = vec_elt_at_index (im->device_classes, hi->dev_class_index);
if (dc->clear_counters)
dc->clear_counters (hi->dev_instance);
}
}
done:
vec_free (hw_if_indices);
return error;
}
static clib_error_t *
show_hw_interfaces (vlib_main_t * vm,
unformat_input_t * input, vlib_cli_command_t * cmd)
{
return show_or_clear_hw_interfaces (vm, input, cmd, 1 /* is_show */ );
}
static clib_error_t *
clear_hw_interfaces (vlib_main_t * vm,
unformat_input_t * input, vlib_cli_command_t * cmd)
{
return show_or_clear_hw_interfaces (vm, input, cmd, 0 /* is_show */ );
}
/*?
* Display more detailed information about all or a list of given interfaces.
* The verboseness of the output can be controlled by the following optional
* parameters:
* - brief: Only show name, index and state (default for bonded interfaces).
* - verbose: Also display additional attributes (default for all other interfaces).
* - detail: Also display all remaining attributes and extended statistics.
*
* To limit the output of the command to bonded interfaces and their slave
* interfaces, use the '<em>bond</em>' optional parameter.
*
* @cliexpar
* Example of how to display default data for all interfaces:
* @cliexstart{show hardware-interfaces}
* Name Idx Link Hardware
* GigabitEthernet7/0/0 1 up GigabitEthernet7/0/0
* Ethernet address ec:f4:bb:c0:bc:fc
* Intel e1000
* carrier up full duplex speed 1000 mtu 9216
* rx queues 1, rx desc 1024, tx queues 3, tx desc 1024
* cpu socket 0
* GigabitEthernet7/0/1 2 up GigabitEthernet7/0/1
* Ethernet address ec:f4:bb:c0:bc:fd
* Intel e1000
* carrier up full duplex speed 1000 mtu 9216
* rx queues 1, rx desc 1024, tx queues 3, tx desc 1024
* cpu socket 0
* VirtualEthernet0/0/0 3 up VirtualEthernet0/0/0
* Ethernet address 02:fe:a5:a9:8b:8e
* VirtualEthernet0/0/1 4 up VirtualEthernet0/0/1
* Ethernet address 02:fe:c0:4e:3b:b0
* VirtualEthernet0/0/2 5 up VirtualEthernet0/0/2
* Ethernet address 02:fe:1f:73:92:81
* VirtualEthernet0/0/3 6 up VirtualEthernet0/0/3
* Ethernet address 02:fe:f2:25:c4:68
* local0 0 down local0
* local
* @cliexend
* Example of how to display '<em>verbose</em>' data for an interface by name and
* software index (where 2 is the software index):
* @cliexstart{show hardware-interfaces GigabitEthernet7/0/0 2 verbose}
* Name Idx Link Hardware
* GigabitEthernet7/0/0 1 up GigabitEthernet7/0/0
* Ethernet address ec:f4:bb:c0:bc:fc
* Intel e1000
* carrier up full duplex speed 1000 mtu 9216
* rx queues 1, rx desc 1024, tx queues 3, tx desc 1024
* cpu socket 0
* GigabitEthernet7/0/1 2 down GigabitEthernet7/0/1
* Ethernet address ec:f4:bb:c0:bc:fd
* Intel e1000
* carrier up full duplex speed 1000 mtu 9216
* rx queues 1, rx desc 1024, tx queues 3, tx desc 1024
* cpu socket 0
* @cliexend
?*/
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (show_hw_interfaces_command, static) = {
.path = "show hardware-interfaces",
.short_help = "show hardware-interfaces [brief|verbose|detail] [bond] "
"[<interface> [<interface> [..]]] [<sw_idx> [<sw_idx> [..]]]",
.function = show_hw_interfaces,
};
/* *INDENT-ON* */
/*?
* Clear the extended statistics for all or a list of given interfaces
* (statistics associated with the '<em>show hardware-interfaces</em>' command).
*
* @cliexpar
* Example of how to clear the extended statistics for all interfaces:
* @cliexcmd{clear hardware-interfaces}
* Example of how to clear the extended statistics for an interface by
* name and software index (where 2 is the software index):
* @cliexcmd{clear hardware-interfaces GigabitEthernet7/0/0 2}
?*/
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (clear_hw_interface_counters_command, static) = {
.path = "clear hardware-interfaces",
.short_help = "clear hardware-interfaces "
"[<interface> [<interface> [..]]] [<sw_idx> [<sw_idx> [..]]]",
.function = clear_hw_interfaces,
};
/* *INDENT-ON* */
static int
sw_interface_name_compare (void *a1, void *a2)
{
vnet_sw_interface_t *si1 = a1;
vnet_sw_interface_t *si2 = a2;
return vnet_sw_interface_compare (vnet_get_main (),
si1->sw_if_index, si2->sw_if_index);
}
static clib_error_t *
show_sw_interfaces (vlib_main_t * vm,
unformat_input_t * input, vlib_cli_command_t * cmd)
{
clib_error_t *error = 0;
vnet_main_t *vnm = vnet_get_main ();
unformat_input_t _linput, *linput = &_linput;
vnet_interface_main_t *im = &vnm->interface_main;
vnet_sw_interface_t *si, *sorted_sis = 0;
u32 sw_if_index = ~(u32) 0;
u8 show_addresses = 0;
u8 show_features = 0;
u8 show_tag = 0;
u8 show_vtr = 0;
int verbose = 0;
/*
* Get a line of input. Won't work if the user typed
* "show interface" and nothing more.
*/
if (unformat_user (input, unformat_line_input, linput))
{
while (unformat_check_input (linput) != UNFORMAT_END_OF_INPUT)
{
/* See if user wants to show specific interface */
if (unformat
(linput, "%U", unformat_vnet_sw_interface, vnm, &sw_if_index))
{
si = pool_elt_at_index (im->sw_interfaces, sw_if_index);
vec_add1 (sorted_sis, si[0]);
}
else if (unformat (linput, "address") || unformat (linput, "addr"))
show_addresses = 1;
else if (unformat (linput, "features") || unformat (linput, "feat"))
show_features = 1;
else if (unformat (linput, "tag"))
show_tag = 1;
else if (unformat (linput, "vtr"))
show_vtr = 1;
else if (unformat (linput, "verbose"))
verbose = 1;
else if (unformat (linput, "%d", &sw_if_index))
{
if (!pool_is_free_index (im->sw_interfaces, sw_if_index))
{
si = pool_elt_at_index (im->sw_interfaces, sw_if_index);
vec_add1 (sorted_sis, si[0]);
}
else
{
vec_free (sorted_sis);
error = clib_error_return (0, "unknown interface index `%d'",
sw_if_index);
goto done;
}
}
else
{
vec_free (sorted_sis);
error = clib_error_return (0, "unknown input `%U'",
format_unformat_error, linput);
goto done;
}
}
unformat_free (linput);
}
if (show_features || show_tag || show_vtr)
{
if (sw_if_index == ~(u32) 0)
{
vec_free (sorted_sis);
return clib_error_return (0, "Interface not specified...");
}
}
if (show_features)
{
vnet_interface_features_show (vm, sw_if_index, verbose);
vlib_cli_output (vm, "%U", format_l2_input_features, sw_if_index, 1);
l2_output_config_t *l2_output = l2output_intf_config (sw_if_index);
vlib_cli_output (vm, "\nl2-output:");
if (l2_output->out_vtr_flag)
vlib_cli_output (vm, "%10s (%s)", "VTR", "--internal--");
vlib_cli_output (vm, "%U", format_l2_output_features,
l2_output->feature_bitmap, 1);
vec_free (sorted_sis);
return 0;
}
if (show_tag)
{
u8 *tag;
tag = vnet_get_sw_interface_tag (vnm, sw_if_index);
vlib_cli_output (vm, "%U: %s",
format_vnet_sw_if_index_name, vnm, sw_if_index,
tag ? (char *) tag : "(none)");
vec_free (sorted_sis);
return 0;
}
/*
* Show vlan tag rewrite data for one interface.
*/
if (show_vtr)
{
u32 vtr_op = L2_VTR_DISABLED;
u32 push_dot1q = 0, tag1 = 0, tag2 = 0;
if (l2vtr_get (vm, vnm, sw_if_index,
&vtr_op, &push_dot1q, &tag1, &tag2) != 0)
{
vlib_cli_output (vm, "%U: Problem getting vlan tag-rewrite data",
format_vnet_sw_if_index_name, vnm, sw_if_index);
return 0;
}
vlib_cli_output (vm, "%U: VTR %0U",
format_vnet_sw_if_index_name, vnm, sw_if_index,
format_vtr, vtr_op, push_dot1q, tag1, tag2);
return 0;
}
if (!show_addresses)
vlib_cli_output (vm, "%U\n", format_vnet_sw_interface, vnm, 0);
if (vec_len (sorted_sis) == 0) /* Get all interfaces */
{
/* Gather interfaces. */
sorted_sis =
vec_new (vnet_sw_interface_t, pool_elts (im->sw_interfaces));
_vec_len (sorted_sis) = 0;
/* *INDENT-OFF* */
pool_foreach (si, im->sw_interfaces)
{
int visible = vnet_swif_is_api_visible (si);
if (visible)
vec_add1 (sorted_sis, si[0]);
}
/* *INDENT-ON* */
/* Sort by name. */
vec_sort_with_function (sorted_sis, sw_interface_name_compare);
}
if (show_addresses)
{
vec_foreach (si, sorted_sis)
{
ip4_main_t *im4 = &ip4_main;
ip6_main_t *im6 = &ip6_main;
ip_lookup_main_t *lm4 = &im4->lookup_main;
ip_lookup_main_t *lm6 = &im6->lookup_main;
ip_interface_address_t *ia = 0;
u32 fib_index4 = 0, fib_index6 = 0;
if (vec_len (im4->fib_index_by_sw_if_index) > si->sw_if_index)
fib_index4 = vec_elt (im4->fib_index_by_sw_if_index,
si->sw_if_index);
if (vec_len (im6->fib_index_by_sw_if_index) > si->sw_if_index)
fib_index6 = vec_elt (im6->fib_index_by_sw_if_index,
si->sw_if_index);
ip4_fib_t *fib4 = ip4_fib_get (fib_index4);
ip6_fib_t *fib6 = ip6_fib_get (fib_index6);
if (si->flags & VNET_SW_INTERFACE_FLAG_UNNUMBERED)
vlib_cli_output
(vm, "%U (%s): \n unnumbered, use %U",
format_vnet_sw_if_index_name, vnm, si->sw_if_index,
(si->flags & VNET_SW_INTERFACE_FLAG_ADMIN_UP) ? "up" : "dn",
format_vnet_sw_if_index_name, vnm, si->unnumbered_sw_if_index);
else
vlib_cli_output
(vm, "%U (%s):",
format_vnet_sw_if_index_name, vnm, si->sw_if_index,
(si->flags & VNET_SW_INTERFACE_FLAG_ADMIN_UP) ? "up" : "dn");
/* Display any L2 info */
vlib_cli_output (vm, "%U", format_l2_input, si->sw_if_index);
/* *INDENT-OFF* */
/* Display any IP4 addressing info */
foreach_ip_interface_address (lm4, ia, si->sw_if_index,
1 /* honor unnumbered */,
({
ip4_address_t *r4 = ip_interface_address_get_address (lm4, ia);
if (fib4->hash.table_id)
vlib_cli_output (
vm, " L3 %U/%d ip4 table-id %d fib-idx %d", format_ip4_address,
r4, ia->address_length, fib4->hash.table_id,
ip4_fib_index_from_table_id (fib4->hash.table_id));
else
vlib_cli_output (vm, " L3 %U/%d",
format_ip4_address, r4, ia->address_length);
}));
/* *INDENT-ON* */
/* *INDENT-OFF* */
/* Display any IP6 addressing info */
foreach_ip_interface_address (lm6, ia, si->sw_if_index,
1 /* honor unnumbered */,
({
ip6_address_t *r6 = ip_interface_address_get_address (lm6, ia);
if (fib6->table_id)
vlib_cli_output (vm, " L3 %U/%d ip6 table-id %d fib-idx %d",
format_ip6_address, r6, ia->address_length,
fib6->table_id,
ip6_fib_index_from_table_id (fib6->table_id));
else
vlib_cli_output (vm, " L3 %U/%d",
format_ip6_address, r6, ia->address_length);
}));
/* *INDENT-ON* */
}
}
else
{
vec_foreach (si, sorted_sis)
{
vlib_cli_output (vm, "%U\n", format_vnet_sw_interface, vnm, si);
}
}
done:
vec_free (sorted_sis);
return error;
}
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (show_sw_interfaces_command, static) = {
.path = "show interface",
.short_help = "show interface [address|addr|features|feat|vtr] [<interface> [<interface> [..]]] [verbose]",
.function = show_sw_interfaces,
.is_mp_safe = 1,
};
/* *INDENT-ON* */
/* Root of all interface commands. */
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (vnet_cli_interface_command, static) = {
.path = "interface",
.short_help = "Interface commands",
};
/* *INDENT-ON* */
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (vnet_cli_set_interface_command, static) = {
.path = "set interface",
.short_help = "Interface commands",
};
/* *INDENT-ON* */
static clib_error_t *
clear_interface_counters (vlib_main_t * vm,
unformat_input_t * input, vlib_cli_command_t * cmd)
{
vnet_main_t *vnm = vnet_get_main ();
vnet_interface_main_t *im = &vnm->interface_main;
vlib_simple_counter_main_t *sm;
vlib_combined_counter_main_t *cm;
int j, n_counters;
n_counters = vec_len (im->combined_sw_if_counters);
for (j = 0; j < n_counters; j++)
{
im = &vnm->interface_main;
cm = im->combined_sw_if_counters + j;
vlib_clear_combined_counters (cm);
}
n_counters = vec_len (im->sw_if_counters);
for (j = 0; j < n_counters; j++)
{
im = &vnm->interface_main;
sm = im->sw_if_counters + j;
vlib_clear_simple_counters (sm);
}
return 0;
}
/*?
* Clear the statistics for all interfaces (statistics associated with the
* '<em>show interface</em>' command).
*
* @cliexpar
* Example of how to clear the statistics for all interfaces:
* @cliexcmd{clear interfaces}
?*/
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (clear_interface_counters_command, static) = {
.path = "clear interfaces",
.short_help = "clear interfaces",
.function = clear_interface_counters,
};
/* *INDENT-ON* */
/**
* Parse subinterface names.
*
* The following subinterface syntax is supported. The first two are for
* backwards compatability:
*
* <intf-name> <id>
* - a subinterface with the name <intf-name>.<id>. The subinterface
* is a single dot1q vlan with vlan id <id> and exact-match semantics.
*
* <intf-name> <min_id>-<max_id>
* - a set of the above subinterfaces, repeating for each id
* in the range <min_id> to <max_id>
*
* In the following, exact-match semantics (i.e. the number of vlan tags on the
* packet must match the number of tags in the configuration) are used only if
* the keyword exact-match is present. Non-exact match is the default.
*
* <intf-name> <id> dot1q <outer_id> [exact-match]
* - a subinterface with the name <intf-name>.<id>. The subinterface
* is a single dot1q vlan with vlan id <outer_id>.
*
* <intf-name> <id> dot1q any [exact-match]
* - a subinterface with the name <intf-name>.<id>. The subinterface
* is a single dot1q vlan with any vlan id.
*
* <intf-name> <id> dot1q <outer_id> inner-dot1q <inner_id> [exact-match]
* - a subinterface with the name <intf-name>.<id>. The subinterface
* is a double dot1q vlan with outer vlan id <outer_id> and inner vlan id
* <inner_id>.
*
* <intf-name> <id> dot1q <outer_id> inner-dot1q any [exact-match]
* - a subinterface with the name <intf-name>.<id>. The subinterface
* is a double dot1q vlan with outer vlan id <id> and any inner vlan id.
*
* <intf-name> <id> dot1q any inner-dot1q any [exact-match]
*
* - a subinterface with the name <intf-name>.<id>. The subinterface
* is a double dot1q vlan with any outer vlan id and any inner vlan id.
*
* For each of the above CLI, there is a duplicate that uses the keyword
* "dot1ad" in place of the first "dot1q". These interfaces use ethertype
* 0x88ad in place of 0x8100 for the outer ethertype. Note that for double-
* tagged packets the inner ethertype is always 0x8100. Also note that
* the dot1q and dot1ad naming spaces are independent, so it is legal to
* have both "Gig3/0/0.1 dot1q 100" and "Gig3/0/0.2 dot1ad 100". For example:
*
* <intf-name> <id> dot1ad <outer_id> inner-dot1q <inner_id> [exact-match]
* - a subinterface with the name <intf-name>.<id>. The subinterface
* is a double dot1ad vlan with outer vlan id <outer_id> and inner vlan
* id <inner_id>.
*
* <intf-name> <id> untagged
* - a subinterface with the name <intf-name>.<id>. The subinterface
* has no vlan tags. Only one can be specified per interface.
*
* <intf-name> <id> default
* - a subinterface with the name <intf-name>.<id>. This is associated
* with a packet that did not match any other configured subinterface
* on this interface. Only one can be specified per interface.
*/
static clib_error_t *
parse_vlan_sub_interfaces (unformat_input_t * input,
vnet_sw_interface_t * template)
{
clib_error_t *error = 0;
u32 inner_vlan, outer_vlan;
if (unformat (input, "any inner-dot1q any"))
{
template->sub.eth.flags.two_tags = 1;
template->sub.eth.flags.outer_vlan_id_any = 1;
template->sub.eth.flags.inner_vlan_id_any = 1;
}
else if (unformat (input, "any"))
{
template->sub.eth.flags.one_tag = 1;
template->sub.eth.flags.outer_vlan_id_any = 1;
}
else if (unformat (input, "%d inner-dot1q any", &outer_vlan))
{
template->sub.eth.flags.two_tags = 1;
template->sub.eth.flags.inner_vlan_id_any = 1;
template->sub.eth.outer_vlan_id = outer_vlan;
}
else if (unformat (input, "%d inner-dot1q %d", &outer_vlan, &inner_vlan))
{
template->sub.eth.flags.two_tags = 1;
template->sub.eth.outer_vlan_id = outer_vlan;
template->sub.eth.inner_vlan_id = inner_vlan;
}
else if (unformat (input, "%d", &outer_vlan))
{
template->sub.eth.flags.one_tag = 1;
template->sub.eth.outer_vlan_id = outer_vlan;
}
else
{
error = clib_error_return (0, "expected dot1q config, got `%U'",
format_unformat_error, input);
goto done;
}
if (unformat_check_input (input) != UNFORMAT_END_OF_INPUT)
{
if (unformat (input, "exact-match"))
{
template->sub.eth.flags.exact_match = 1;
}
}
done:
return error;
}
static clib_error_t *
create_sub_interfaces (vlib_main_t * vm,
unformat_input_t * input, vlib_cli_command_t * cmd)
{
vnet_main_t *vnm = vnet_get_main ();
clib_error_t *error = 0;
u32 hw_if_index, sw_if_index;
vnet_hw_interface_t *hi;
u32 id, id_min, id_max;
vnet_sw_interface_t template;
hw_if_index = ~0;
if (!unformat_user (input, unformat_vnet_hw_interface, vnm, &hw_if_index))
{
error = clib_error_return (0, "unknown interface `%U'",
format_unformat_error, input);
goto done;
}
clib_memset (&template, 0, sizeof (template));
template.sub.eth.raw_flags = 0;
if (unformat (input, "%d default", &id_min))
{
id_max = id_min;
template.sub.eth.flags.default_sub = 1;
}
else if (unformat (input, "%d untagged", &id_min))
{
id_max = id_min;
template.sub.eth.flags.no_tags = 1;
template.sub.eth.flags.exact_match = 1;
}
else if (unformat (input, "%d dot1q", &id_min))
{
/* parse dot1q config */
id_max = id_min;
error = parse_vlan_sub_interfaces (input, &template);
if (error)
goto done;
}
else if (unformat (input, "%d dot1ad", &id_min))
{
/* parse dot1ad config */
id_max = id_min;
template.sub.eth.flags.dot1ad = 1;
error = parse_vlan_sub_interfaces (input, &template);
if (error)
goto done;
}
else if (unformat (input, "%d-%d", &id_min, &id_max))
{
template.sub.eth.flags.one_tag = 1;
template.sub.eth.flags.exact_match = 1;
if (id_min > id_max)
goto id_error;
}
else if (unformat (input, "%d", &id_min))
{
id_max = id_min;
template.sub.eth.flags.one_tag = 1;
template.sub.eth.outer_vlan_id = id_min;
template.sub.eth.flags.exact_match = 1;
}
else
{
id_error:
error = clib_error_return (0, "expected ID or ID MIN-MAX, got `%U'",
format_unformat_error, input);
goto done;
}
hi = vnet_get_hw_interface (vnm, hw_if_index);
if (hi->bond_info == VNET_HW_INTERFACE_BOND_INFO_SLAVE)
{
error =
clib_error_return (0,
"not allowed as %v belong to a BondEthernet interface",
hi->name);
goto done;
}
for (id = id_min; id <= id_max; id++)
{
uword *p;
vnet_interface_main_t *im = &vnm->interface_main;
u64 sup_and_sub_key = ((u64) (hi->sw_if_index) << 32) | (u64) id;
u64 *kp;
p = hash_get_mem (im->sw_if_index_by_sup_and_sub, &sup_and_sub_key);
if (p)
{
if (CLIB_DEBUG > 0)
clib_warning ("sup sw_if_index %d, sub id %d already exists\n",
hi->sw_if_index, id);
continue;
}
template.type = VNET_SW_INTERFACE_TYPE_SUB;
template.flood_class = VNET_FLOOD_CLASS_NORMAL;
template.sup_sw_if_index = hi->sw_if_index;
template.sub.id = id;
if (id_min < id_max)
template.sub.eth.outer_vlan_id = id;
error = vnet_create_sw_interface (vnm, &template, &sw_if_index);
if (error)
goto done;
kp = clib_mem_alloc (sizeof (*kp));
*kp = sup_and_sub_key;
hash_set (hi->sub_interface_sw_if_index_by_id, id, sw_if_index);
hash_set_mem (im->sw_if_index_by_sup_and_sub, kp, sw_if_index);
vlib_cli_output (vm, "%U\n", format_vnet_sw_if_index_name,
vnet_get_main (), sw_if_index);
}
done:
return error;
}
/*?
* This command is used to add VLAN IDs to interfaces, also known as subinterfaces.
* The primary input to this command is the '<em>interface</em>' and '<em>subId</em>'
* (subinterface Id) parameters. If no additional VLAN ID is provide, the VLAN ID is
* assumed to be the '<em>subId</em>'. The VLAN ID and '<em>subId</em>' can be different,
* but this is not recommended.
*
* This command has several variations:
* - <b>create sub-interfaces <interface> <subId></b> - Create a subinterface to
* process packets with a given 802.1q VLAN ID (same value as the '<em>subId</em>').
*
* - <b>create sub-interfaces <interface> <subId> default</b> - Adding the
* '<em>default</em>' parameter indicates that packets with VLAN IDs that do not
* match any other subinterfaces should be sent to this subinterface.
*
* - <b>create sub-interfaces <interface> <subId> untagged</b> - Adding the
* '<em>untagged</em>' parameter indicates that packets no VLAN IDs should be sent
* to this subinterface.
*
* - <b>create sub-interfaces <interface> <subId>-<subId></b> - Create a range of
* subinterfaces to handle a range of VLAN IDs.
*
* - <b>create sub-interfaces <interface> <subId> dot1q|dot1ad <vlanId>|any [exact-match]</b> -
* Use this command to specify the outer VLAN ID, to either be explicit or to make the
* VLAN ID different from the '<em>subId</em>'.
*
* - <b>create sub-interfaces <interface> <subId> dot1q|dot1ad <vlanId>|any inner-dot1q
* <vlanId>|any [exact-match]</b> - Use this command to specify the outer VLAN ID and
* the inner VLAN ID.
*
* When '<em>dot1q</em>' or '<em>dot1ad</em>' is explicitly entered, subinterfaces
* can be configured as either exact-match or non-exact match. Non-exact match is the CLI
* default. If '<em>exact-match</em>' is specified, packets must have the same number of
* VLAN tags as the configuration. For non-exact-match, packets must at least that number
* of tags. L3 (routed) interfaces must be configured as exact-match. L2 interfaces are
* typically configured as non-exact-match. If '<em>dot1q</em>' or '<em>dot1ad</em>' is NOT
* entered, then the default behavior is exact-match.
*
* Use the '<em>show interface</em>' command to display all subinterfaces.
*
* @cliexpar
* @parblock
* Example of how to create a VLAN subinterface 11 to process packets on 802.1q VLAN ID 11:
* @cliexcmd{create sub-interfaces GigabitEthernet2/0/0 11}
*
* The previous example is shorthand and is equivalent to:
* @cliexcmd{create sub-interfaces GigabitEthernet2/0/0 11 dot1q 11 exact-match}
*
*
* Example of how to create a subinterface number that is different from the VLAN ID:
* @cliexcmd{create sub-interfaces GigabitEthernet2/0/0 11 dot1q 100}
*
*
* Examples of how to create q-in-q and q-in-any subinterfaces:
* @cliexcmd{create sub-interfaces GigabitEthernet2/0/0 11 dot1q 100 inner-dot1q 200}
* @cliexcmd{create sub-interfaces GigabitEthernet2/0/0 12 dot1q 100 inner-dot1q any}
*
* Examples of how to create dot1ad interfaces:
* @cliexcmd{create sub-interfaces GigabitEthernet2/0/0 11 dot1ad 11}
* @cliexcmd{create sub-interfaces GigabitEthernet2/0/0 12 dot1ad 100 inner-dot1q 200}
*
*
* Examples of '<em>exact-match</em>' versus non-exact match. A packet with
* outer VLAN 100 and inner VLAN 200 would match this interface, because the default
* is non-exact match:
* @cliexcmd{create sub-interfaces GigabitEthernet2/0/0 5 dot1q 100}
*
* However, the same packet would NOT match this interface because '<em>exact-match</em>'
* is specified and only one VLAN is configured, but packet contains two VLANs:
* @cliexcmd{create sub-interfaces GigabitEthernet2/0/0 5 dot1q 100 exact-match}
*
*
* Example of how to created a subinterface to process untagged packets:
* @cliexcmd{create sub-interfaces GigabitEthernet2/0/0 5 untagged}
*
* Example of how to created a subinterface to process any packet with a VLAN ID that
* does not match any other subinterface:
* @cliexcmd{create sub-interfaces GigabitEthernet2/0/0 7 default}
*
* When subinterfaces are created, they are in the down state. Example of how to
* enable a newly created subinterface:
* @cliexcmd{set interface GigabitEthernet2/0/0.7 up}
* @endparblock
?*/
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (create_sub_interfaces_command, static) = {
.path = "create sub-interfaces",
.short_help = "create sub-interfaces <interface> "
"{<subId> [default|untagged]} | "
"{<subId>-<subId>} | "
"{<subId> dot1q|dot1ad <vlanId>|any [inner-dot1q <vlanId>|any] [exact-match]}",
.function = create_sub_interfaces,
};
/* *INDENT-ON* */
static clib_error_t *
set_state (vlib_main_t * vm,
unformat_input_t * input, vlib_cli_command_t * cmd)
{
vnet_main_t *vnm = vnet_get_main ();
clib_error_t *error;
u32 sw_if_index, flags;
sw_if_index = ~0;
if (!unformat_user (input, unformat_vnet_sw_interface, vnm, &sw_if_index))
{
error = clib_error_return (0, "unknown interface `%U'",
format_unformat_error, input);
goto done;
}
if (!unformat (input, "%U", unformat_vnet_sw_interface_flags, &flags))
{
error = clib_error_return (0, "unknown flags `%U'",
format_unformat_error, input);
goto done;
}
error = vnet_sw_interface_set_flags (vnm, sw_if_index, flags);
if (error)
goto done;
done:
return error;
}
/*?
* This command is used to change the admin state (up/down) of an interface.
*
* If an interface is down, the optional '<em>punt</em>' flag can also be set.
* The '<em>punt</em>' flag implies the interface is disabled for forwarding
* but punt all traffic to slow-path. Use the '<em>enable</em>' flag to clear
* '<em>punt</em>' flag (interface is still down).
*
* @cliexpar
* Example of how to configure the admin state of an interface to
'<em>up</em>':
* @cliexcmd{set interface state GigabitEthernet2/0/0 up}
* Example of how to configure the admin state of an interface to
'<em>down</em>':
* @cliexcmd{set interface state GigabitEthernet2/0/0 down}
?*/
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (set_state_command, static) = {
.path = "set interface state",
.short_help = "set interface state <interface> [up|down|punt|enable]",
.function = set_state,
};
/* *INDENT-ON* */
static clib_error_t *
set_unnumbered (vlib_main_t * vm,
unformat_input_t * input, vlib_cli_command_t * cmd)
{
vnet_main_t *vnm = vnet_get_main ();
u32 unnumbered_sw_if_index = ~0;
u32 inherit_from_sw_if_index = ~0;
int enable = 1;
if (unformat (input, "%U use %U",
unformat_vnet_sw_interface, vnm, &unnumbered_sw_if_index,
unformat_vnet_sw_interface, vnm, &inherit_from_sw_if_index))
enable = 1;
else if (unformat (input, "del %U",
unformat_vnet_sw_interface, vnm,
&unnumbered_sw_if_index))
enable = 0;
else
return clib_error_return (0, "parse error '%U'",
format_unformat_error, input);
if (~0 == unnumbered_sw_if_index)
return clib_error_return (0, "Specify the unnumbered interface");
if (enable && ~0 == inherit_from_sw_if_index)
return clib_error_return (0, "When enabling unnumbered specify the"
" IP enabled interface that it uses");
int rv = vnet_sw_interface_update_unnumbered (
unnumbered_sw_if_index, inherit_from_sw_if_index, enable);
switch (rv)
{
case 0:
break;
case VNET_API_ERROR_UNEXPECTED_INTF_STATE:
return clib_error_return (
0,
"When enabling unnumbered both interfaces must be in the same tables");
default:
return clib_error_return (
0, "vnet_sw_interface_update_unnumbered returned %d", rv);
}
return (NULL);
}
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (set_unnumbered_command, static) = {
.path = "set interface unnumbered",
.short_help = "set interface unnumbered [<interface> use <interface> | del <interface>]",
.function = set_unnumbered,
};
/* *INDENT-ON* */
static clib_error_t *
set_hw_class (vlib_main_t * vm,
unformat_input_t * input, vlib_cli_command_t * cmd)
{
vnet_main_t *vnm = vnet_get_main ();
vnet_interface_main_t *im = &vnm->interface_main;
clib_error_t *error;
u32 hw_if_index, hw_class_index;
hw_if_index = ~0;
if (!unformat_user (input, unformat_vnet_hw_interface, vnm, &hw_if_index))
{
error = clib_error_return (0, "unknown hardware interface `%U'",
format_unformat_error, input);
goto done;
}
if (!unformat_user (input, unformat_hash_string,
im->hw_interface_class_by_name, &hw_class_index))
{
error = clib_error_return (0, "unknown hardware class `%U'",
format_unformat_error, input);
goto done;
}
error = vnet_hw_interface_set_class (vnm, hw_if_index, hw_class_index);
if (error)
goto done;
done:
return error;
}
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (set_hw_class_command, static) = {
.path = "set interface hw-class",
.short_help = "Set interface hardware class",
.function = set_hw_class,
};
/* *INDENT-ON* */
static clib_error_t *
vnet_interface_cli_init (vlib_main_t * vm)
{
return 0;
}
VLIB_INIT_FUNCTION (vnet_interface_cli_init);
static clib_error_t *
renumber_interface_command_fn (vlib_main_t * vm,
unformat_input_t * input,
vlib_cli_command_t * cmd)
{
u32 hw_if_index;
u32 new_dev_instance;
vnet_main_t *vnm = vnet_get_main ();
int rv;
if (!unformat_user (input, unformat_vnet_hw_interface, vnm, &hw_if_index))
return clib_error_return (0, "unknown hardware interface `%U'",
format_unformat_error, input);
if (!unformat (input, "%d", &new_dev_instance))
return clib_error_return (0, "new dev instance missing");
rv = vnet_interface_name_renumber (hw_if_index, new_dev_instance);
switch (rv)
{
case 0:
break;
default:
return clib_error_return (0, "vnet_interface_name_renumber returned %d",
rv);
}
return 0;
}
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (renumber_interface_command, static) = {
.path = "renumber interface",
.short_help = "renumber interface <interface> <new-dev-instance>",
.function = renumber_interface_command_fn,
};
/* *INDENT-ON* */
static clib_error_t *
promiscuous_cmd (vlib_main_t * vm,
unformat_input_t * input, vlib_cli_command_t * cmd)
{
vnet_main_t *vnm = vnet_get_main ();
u32 hw_if_index;
u32 flags = ETHERNET_INTERFACE_FLAG_ACCEPT_ALL;
ethernet_main_t *em = &ethernet_main;
ethernet_interface_t *eif;
if (unformat (input, "on %U",
unformat_vnet_hw_interface, vnm, &hw_if_index))
;
else if (unformat (input, "off %U",
unformat_ethernet_interface, vnm, &hw_if_index))
flags = 0;
else
return clib_error_return (0, "unknown input `%U'",
format_unformat_error, input);
eif = ethernet_get_interface (em, hw_if_index);
if (!eif)
return clib_error_return (0, "not supported");
ethernet_set_flags (vnm, hw_if_index, flags);
return 0;
}
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (set_interface_promiscuous_cmd, static) = {
.path = "set interface promiscuous",
.short_help = "set interface promiscuous [on|off] <interface>",
.function = promiscuous_cmd,
};
/* *INDENT-ON* */
static clib_error_t *
mtu_cmd (vlib_main_t * vm, unformat_input_t * input, vlib_cli_command_t * cmd)
{
vnet_main_t *vnm = vnet_get_main ();
u32 hw_if_index, sw_if_index, mtu;
ethernet_main_t *em = &ethernet_main;
u32 mtus[VNET_N_MTU] = { 0, 0, 0, 0 };
clib_error_t *err;
if (unformat (input, "%d %U", &mtu,
unformat_vnet_hw_interface, vnm, &hw_if_index))
{
/*
* Change physical MTU on interface. Only supported for Ethernet
* interfaces
*/
ethernet_interface_t *eif = ethernet_get_interface (em, hw_if_index);
if (!eif)
return clib_error_return (0, "not supported");
err = vnet_hw_interface_set_mtu (vnm, hw_if_index, mtu);
if (err)
return err;
goto done;
}
else if (unformat (input, "packet %d %U", &mtu,
unformat_vnet_sw_interface, vnm, &sw_if_index))
/* Set default packet MTU (including L3 header */
mtus[VNET_MTU_L3] = mtu;
else if (unformat (input, "ip4 %d %U", &mtu,
unformat_vnet_sw_interface, vnm, &sw_if_index))
mtus[VNET_MTU_IP4] = mtu;
else if (unformat (input, "ip6 %d %U", &mtu,
unformat_vnet_sw_interface, vnm, &sw_if_index))
mtus[VNET_MTU_IP6] = mtu;
else if (unformat (input, "mpls %d %U", &mtu,
unformat_vnet_sw_interface, vnm, &sw_if_index))
mtus[VNET_MTU_MPLS] = mtu;
else
return clib_error_return (0, "unknown input `%U'",
format_unformat_error, input);
vnet_sw_interface_set_protocol_mtu (vnm, sw_if_index, mtus);
done:
return 0;
}
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (set_interface_mtu_cmd, static) = {
.path = "set interface mtu",
.short_help = "set interface mtu [packet|ip4|ip6|mpls] <value> <interface>",
.function = mtu_cmd,
};
/* *INDENT-ON* */
static clib_error_t *
show_interface_sec_mac_addr_fn (vlib_main_t * vm, unformat_input_t * input,
vlib_cli_command_t * cmd)
{
vnet_main_t *vnm = vnet_get_main ();
vnet_interface_main_t *im = &vnm->interface_main;
ethernet_main_t *em = &ethernet_main;
u32 sw_if_index = ~0;
vnet_sw_interface_t *si, *sorted_sis = 0;
if (unformat (input, "%U", unformat_vnet_sw_interface, vnm, &sw_if_index))
{
si = pool_elt_at_index (im->sw_interfaces, sw_if_index);
vec_add1 (sorted_sis, si[0]);
}
/* if an interface name was not passed, get all interfaces */
if (vec_len (sorted_sis) == 0)
{
sorted_sis =
vec_new (vnet_sw_interface_t, pool_elts (im->sw_interfaces));
_vec_len (sorted_sis) = 0;
/* *INDENT-OFF* */
pool_foreach (si, im->sw_interfaces)
{
int visible = vnet_swif_is_api_visible (si);
if (visible)
vec_add1 (sorted_sis, si[0]);
}
/* *INDENT-ON* */
/* Sort by name. */
vec_sort_with_function (sorted_sis, sw_interface_name_compare);
}
vec_foreach (si, sorted_sis)
{
vnet_sw_interface_t *sup_si;
ethernet_interface_t *ei;
sup_si = vnet_get_sup_sw_interface (vnm, si->sw_if_index);
ei = ethernet_get_interface (em, sup_si->hw_if_index);
vlib_cli_output (vm, "%U (%s):",
format_vnet_sw_if_index_name, vnm, si->sw_if_index,
(si->flags & VNET_SW_INTERFACE_FLAG_ADMIN_UP) ?
"up" : "dn");
if (ei && ei->secondary_addrs)
{
ethernet_interface_address_t *sec_addr;
vec_foreach (sec_addr, ei->secondary_addrs)
{
vlib_cli_output (vm, " %U", format_mac_address_t, &sec_addr->mac);
}
}
}
vec_free (sorted_sis);
return 0;
}
/*?
* This command is used to display interface secondary mac addresses.
*
* @cliexpar
* Example of how to display interface secondary mac addresses:
* @cliexstart{show interface secondary-mac-address}
* @cliexend
?*/
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (show_interface_sec_mac_addr, static) = {
.path = "show interface secondary-mac-address",
.short_help = "show interface secondary-mac-address [<interface>]",
.function = show_interface_sec_mac_addr_fn,
};
/* *INDENT-ON* */
static clib_error_t *
interface_add_del_mac_address (vlib_main_t * vm, unformat_input_t * input,
vlib_cli_command_t * cmd)
{
vnet_main_t *vnm = vnet_get_main ();
vnet_sw_interface_t *si = NULL;
clib_error_t *error = 0;
u32 sw_if_index = ~0;
u8 mac[6] = { 0 };
u8 is_add, is_del;
is_add = is_del = 0;
if (!unformat_user (input, unformat_vnet_sw_interface, vnm, &sw_if_index))
{
error = clib_error_return (0, "unknown interface `%U'",
format_unformat_error, input);
goto done;
}
if (!unformat_user (input, unformat_ethernet_address, mac))
{
error = clib_error_return (0, "expected mac address `%U'",
format_unformat_error, input);
goto done;
}
while (unformat_check_input (input) != UNFORMAT_END_OF_INPUT)
{
if (unformat (input, "add"))
is_add = 1;
else if (unformat (input, "del"))
is_del = 1;
else
break;
}
if (is_add == is_del)
{
error = clib_error_return (0, "must choose one of add or del");
goto done;
}
si = vnet_get_sw_interface (vnm, sw_if_index);
error =
vnet_hw_interface_add_del_mac_address (vnm, si->hw_if_index, mac, is_add);
done:
return error;
}
/*?
* The '<em>set interface secondary-mac-address </em>' command allows adding
* or deleting extra MAC addresses on a given interface without changing the
* default MAC address. This could allow packets sent to these MAC addresses
* to be received without setting the interface to promiscuous mode.
* Not all interfaces support this operation. The ones that do are mostly
* hardware NICs, though virtio does also.
*
* @cliexpar
* @parblock
* Example of how to add a secondary MAC Address on an interface:
* @cliexcmd{set interface secondary-mac-address GigabitEthernet0/8/0 aa:bb:cc:dd:ee:01 add}
* Example of how to delete a secondary MAC address from an interface:
* @cliexcmd{set interface secondary-mac-address GigabitEthernet0/8/0 aa:bb:cc:dd:ee:01 del}
* @endparblock
?*/
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (interface_add_del_mac_address_cmd, static) = {
.path = "set interface secondary-mac-address",
.short_help = "set interface secondary-mac-address <interface> <mac-address> [(add|del)]",
.function = interface_add_del_mac_address,
};
/* *INDENT-ON* */
static clib_error_t *
set_interface_mac_address (vlib_main_t * vm, unformat_input_t * input,
vlib_cli_command_t * cmd)
{
vnet_main_t *vnm = vnet_get_main ();
vnet_sw_interface_t *si = NULL;
clib_error_t *error = 0;
u32 sw_if_index = ~0;
u8 mac[6] = { 0 };
if (!unformat_user (input, unformat_vnet_sw_interface, vnm, &sw_if_index))
{
error = clib_error_return (0, "unknown interface `%U'",
format_unformat_error, input);
goto done;
}
if (!unformat_user (input, unformat_ethernet_address, mac))
{
error = clib_error_return (0, "expected mac address `%U'",
format_unformat_error, input);
goto done;
}
si = vnet_get_sw_interface (vnm, sw_if_index);
error = vnet_hw_interface_change_mac_address (vnm, si->hw_if_index, mac);
done:
return error;
}
/*?
* The '<em>set interface mac address </em>' command allows to set MAC address of given interface.
* In case of NIC interfaces the one has to support MAC address change. A side effect of MAC address
* change are changes of MAC addresses in FIB tables (ipv4 and ipv6).
*
* @cliexpar
* @parblock
* Example of how to change MAC Address of interface:
* @cliexcmd{set interface mac address GigabitEthernet0/8/0 aa:bb:cc:dd:ee:01}
* @cliexcmd{set interface mac address host-vpp0 aa:bb:cc:dd:ee:02}
* @cliexcmd{set interface mac address tap-0 aa:bb:cc:dd:ee:03}
* @cliexcmd{set interface mac address pg0 aa:bb:cc:dd:ee:04}
* @endparblock
?*/
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (set_interface_mac_address_cmd, static) = {
.path = "set interface mac address",
.short_help = "set interface mac address <interface> <mac-address>",
.function = set_interface_mac_address,
};
/* *INDENT-ON* */
static clib_error_t *
set_tag (vlib_main_t * vm, unformat_input_t * input, vlib_cli_command_t * cmd)
{
vnet_main_t *vnm = vnet_get_main ();
u32 sw_if_index = ~0;
u8 *tag = 0;
if (!unformat (input, "%U %s", unformat_vnet_sw_interface,
vnm, &sw_if_index, &tag))
return clib_error_return (0, "unknown input `%U'",
format_unformat_error, input);
vnet_set_sw_interface_tag (vnm, tag, sw_if_index);
return 0;
}
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (set_tag_command, static) = {
.path = "set interface tag",
.short_help = "set interface tag <interface> <tag>",
.function = set_tag,
};
/* *INDENT-ON* */
static clib_error_t *
clear_tag (vlib_main_t * vm, unformat_input_t * input,
vlib_cli_command_t * cmd)
{
vnet_main_t *vnm = vnet_get_main ();
u32 sw_if_index = ~0;
if (!unformat (input, "%U", unformat_vnet_sw_interface, vnm, &sw_if_index))
return clib_error_return (0, "unknown input `%U'",
format_unformat_error, input);
vnet_clear_sw_interface_tag (vnm, sw_if_index);
return 0;
}
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (clear_tag_command, static) = {
.path = "clear interface tag",
.short_help = "clear interface tag <interface>",
.function = clear_tag,
};
/* *INDENT-ON* */
static clib_error_t *
set_ip_directed_broadcast (vlib_main_t * vm,
unformat_input_t * input, vlib_cli_command_t * cmd)
{
vnet_main_t *vnm = vnet_get_main ();
u32 sw_if_index = ~0;
u8 enable = 0;
if (!unformat (input, "%U", unformat_vnet_sw_interface, vnm, &sw_if_index));
else if (unformat (input, "enable"))
enable = 1;
else if (unformat (input, "disable"))
enable = 0;
else
return clib_error_return (0, "unknown input: `%U'",
format_unformat_error, input);
if (~0 == sw_if_index)
return clib_error_return (0, "specify an interface: `%U'",
format_unformat_error, input);
vnet_sw_interface_ip_directed_broadcast (vnm, sw_if_index, enable);
return 0;
}
/*?
* This command is used to enable/disable IP directed broadcast
* If directed broadcast is enabled a packet sent to the interface's
* subnet broadcast address will be sent L2 broadcast on the interface,
* otherwise it is dropped.
?*/
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (set_ip_directed_broadcast_command, static) = {
.path = "set interface ip directed-broadcast",
.short_help = "set interface enable <interface> <enable|disable>",
.function = set_ip_directed_broadcast,
};
/* *INDENT-ON* */
clib_error_t *
set_hw_interface_change_rx_mode (vnet_main_t * vnm, u32 hw_if_index,
u8 queue_id_valid, u32 queue_id,
vnet_hw_if_rx_mode mode)
{
clib_error_t *error = 0;
vnet_hw_interface_t *hw;
u32 *queue_indices = 0;
hw = vnet_get_hw_interface (vnm, hw_if_index);
if (queue_id_valid)
{
u32 queue_index;
queue_index =
vnet_hw_if_get_rx_queue_index_by_id (vnm, hw_if_index, queue_id);
if (queue_index == ~0)
return clib_error_return (0, "unknown queue %u on interface %s",
queue_id, hw->name);
vec_add1 (queue_indices, queue_index);
}
else
queue_indices = hw->rx_queue_indices;
for (int i = 0; i < vec_len (queue_indices); i++)
{
int rv = vnet_hw_if_set_rx_queue_mode (vnm, queue_indices[i], mode);
if (rv)
goto done;
}
done:
if (queue_indices != hw->rx_queue_indices)
vec_free (queue_indices);
vnet_hw_if_update_runtime_data (vnm, hw_if_index);
return error;
}
static clib_error_t *
set_interface_rx_mode (vlib_main_t * vm, unformat_input_t * input,
vlib_cli_command_t * cmd)
{
clib_error_t *error = 0;
unformat_input_t _line_input, *line_input = &_line_input;
vnet_main_t *vnm = vnet_get_main ();
u32 hw_if_index = (u32) ~ 0;
u32 queue_id = (u32) ~ 0;
vnet_hw_if_rx_mode mode = VNET_HW_IF_RX_MODE_UNKNOWN;
u8 queue_id_valid = 0;
if (!unformat_user (input, unformat_line_input, line_input))
return 0;
while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
{
if (unformat
(line_input, "%U", unformat_vnet_hw_interface, vnm, &hw_if_index))
;
else if (unformat (line_input, "queue %d", &queue_id))
queue_id_valid = 1;
else if (unformat (line_input, "polling"))
mode = VNET_HW_IF_RX_MODE_POLLING;
else if (unformat (line_input, "interrupt"))
mode = VNET_HW_IF_RX_MODE_INTERRUPT;
else if (unformat (line_input, "adaptive"))
mode = VNET_HW_IF_RX_MODE_ADAPTIVE;
else
{
error = clib_error_return (0, "parse error: '%U'",
format_unformat_error, line_input);
unformat_free (line_input);
return error;
}
}
unformat_free (line_input);
if (hw_if_index == (u32) ~ 0)
return clib_error_return (0, "please specify valid interface name");
if (mode == VNET_HW_IF_RX_MODE_UNKNOWN)
return clib_error_return (0, "please specify valid rx-mode");
error = set_hw_interface_change_rx_mode (vnm, hw_if_index, queue_id_valid,
queue_id, mode);
return (error);
}
/*?
* This command is used to assign the RX packet processing mode (polling,
* interrupt, adaptive) of the a given interface, and optionally a
* given queue. If the '<em>queue</em>' is not provided, the '<em>mode</em>'
* is applied to all queues of the interface. Not all interfaces support
* all modes. To display the current rx-mode use the command
* '<em>show interface rx-placement</em>'.
*
* @cliexpar
* Example of how to assign rx-mode to all queues on an interface:
* @cliexcmd{set interface rx-mode VirtualEthernet0/0/12 polling}
* Example of how to assign rx-mode to one queue of an interface:
* @cliexcmd{set interface rx-mode VirtualEthernet0/0/12 queue 0 interrupt}
* Example of how to display the rx-mode of all interfaces:
* @cliexstart{show interface rx-placement}
* Thread 1 (vpp_wk_0):
* node dpdk-input:
* GigabitEthernet7/0/0 queue 0 (polling)
* node vhost-user-input:
* VirtualEthernet0/0/12 queue 0 (interrupt)
* VirtualEthernet0/0/12 queue 2 (polling)
* VirtualEthernet0/0/13 queue 0 (polling)
* VirtualEthernet0/0/13 queue 2 (polling)
* Thread 2 (vpp_wk_1):
* node dpdk-input:
* GigabitEthernet7/0/1 queue 0 (polling)
* node vhost-user-input:
* VirtualEthernet0/0/12 queue 1 (polling)
* VirtualEthernet0/0/12 queue 3 (polling)
* VirtualEthernet0/0/13 queue 1 (polling)
* VirtualEthernet0/0/13 queue 3 (polling)
* @cliexend
?*/
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (cmd_set_if_rx_mode,static) = {
.path = "set interface rx-mode",
.short_help = "set interface rx-mode <interface> [queue <n>] [polling | interrupt | adaptive]",
.function = set_interface_rx_mode,
};
/* *INDENT-ON* */
static clib_error_t *
show_interface_rx_placement_fn (vlib_main_t * vm, unformat_input_t * input,
vlib_cli_command_t * cmd)
{
u8 *s = 0;
vnet_main_t *vnm = vnet_get_main ();
vnet_hw_if_rx_queue_t **all_queues = 0;
vnet_hw_if_rx_queue_t **qptr;
vnet_hw_if_rx_queue_t *q;
pool_foreach (q, vnm->interface_main.hw_if_rx_queues)
vec_add1 (all_queues, q);
vec_sort_with_function (all_queues, vnet_hw_if_rxq_cmp_cli_api);
u32 prev_node = ~0;
vec_foreach (qptr, all_queues)
{
u32 current_thread = qptr[0]->thread_index;
u32 hw_if_index = qptr[0]->hw_if_index;
vnet_hw_interface_t *hw_if = vnet_get_hw_interface (vnm, hw_if_index);
u32 current_node = hw_if->input_node_index;
if (current_node != prev_node)
s = format (s, " node %U:\n", format_vlib_node_name, vm, current_node);
s = format (s, " %U queue %u (%U)\n", format_vnet_sw_if_index_name,
vnm, hw_if->sw_if_index, qptr[0]->queue_id,
format_vnet_hw_if_rx_mode, qptr[0]->mode);
if (qptr == all_queues + vec_len (all_queues) - 1 ||
current_thread != qptr[1]->thread_index)
{
vlib_cli_output (vm, "Thread %u (%s):\n%v", current_thread,
vlib_worker_threads[current_thread].name, s);
vec_reset_length (s);
}
prev_node = current_node;
}
vec_free (s);
vec_free (all_queues);
return 0;
}
/*?
* This command is used to display the interface and queue worker
* thread placement.
*
* @cliexpar
* Example of how to display the interface placement:
* @cliexstart{show interface rx-placement}
* Thread 1 (vpp_wk_0):
* node dpdk-input:
* GigabitEthernet7/0/0 queue 0 (polling)
* node vhost-user-input:
* VirtualEthernet0/0/12 queue 0 (polling)
* VirtualEthernet0/0/12 queue 2 (polling)
* VirtualEthernet0/0/13 queue 0 (polling)
* VirtualEthernet0/0/13 queue 2 (polling)
* Thread 2 (vpp_wk_1):
* node dpdk-input:
* GigabitEthernet7/0/1 queue 0 (polling)
* node vhost-user-input:
* VirtualEthernet0/0/12 queue 1 (polling)
* VirtualEthernet0/0/12 queue 3 (polling)
* VirtualEthernet0/0/13 queue 1 (polling)
* VirtualEthernet0/0/13 queue 3 (polling)
* @cliexend
?*/
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (show_interface_rx_placement, static) = {
.path = "show interface rx-placement",
.short_help = "show interface rx-placement",
.function = show_interface_rx_placement_fn,
};
/* *INDENT-ON* */
clib_error_t *
set_hw_interface_rx_placement (u32 hw_if_index, u32 queue_id,
u32 thread_index, u8 is_main)
{
vnet_main_t *vnm = vnet_get_main ();
vnet_device_main_t *vdm = &vnet_device_main;
vnet_hw_interface_t *hw;
u32 queue_index;
if (is_main)
thread_index = 0;
else
thread_index += vdm->first_worker_thread_index;
if (thread_index > vdm->last_worker_thread_index)
return clib_error_return (0,
"please specify valid worker thread or main");
hw = vnet_get_hw_interface (vnm, hw_if_index);
queue_index =
vnet_hw_if_get_rx_queue_index_by_id (vnm, hw_if_index, queue_id);
if (queue_index == ~0)
return clib_error_return (0, "unknown queue %u on interface %s", queue_id,
hw->name);
vnet_hw_if_set_rx_queue_thread_index (vnm, queue_index, thread_index);
vnet_hw_if_update_runtime_data (vnm, hw_if_index);
return 0;
}
static clib_error_t *
set_interface_rx_placement (vlib_main_t *vm, unformat_input_t *input,
vlib_cli_command_t *cmd)
{
clib_error_t *error = 0;
unformat_input_t _line_input, *line_input = &_line_input;
vnet_main_t *vnm = vnet_get_main ();
u32 hw_if_index = (u32) ~ 0;
u32 queue_id = (u32) 0;
u32 thread_index = (u32) ~ 0;
u8 is_main = 0;
if (!unformat_user (input, unformat_line_input, line_input))
return 0;
while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
{
if (unformat
(line_input, "%U", unformat_vnet_hw_interface, vnm, &hw_if_index))
;
else if (unformat (line_input, "queue %d", &queue_id))
;
else if (unformat (line_input, "main", &thread_index))
is_main = 1;
else if (unformat (line_input, "worker %d", &thread_index))
;
else
{
error = clib_error_return (0, "parse error: '%U'",
format_unformat_error, line_input);
unformat_free (line_input);
return error;
}
}
unformat_free (line_input);
if (hw_if_index == (u32) ~ 0)
return clib_error_return (0, "please specify valid interface name");
error = set_hw_interface_rx_placement (hw_if_index, queue_id, thread_index,
is_main);
return (error);
}
/*?
* This command is used to assign a given interface, and optionally a
* given queue, to a different thread. If the '<em>queue</em>' is not provided,
* it defaults to 0. The '<em>worker</em>' parameter is zero based and the index
* in the thread name, for example, 0 in the thread name '<em>vpp_wk_0</em>'.
*
* @cliexpar
* Example of how to display the interface placement:
* @cliexstart{show interface rx-placement}
* Thread 1 (vpp_wk_0):
* node dpdk-input:
* GigabitEthernet7/0/0 queue 0 (polling)
* node vhost-user-input:
* VirtualEthernet0/0/12 queue 0 (polling)
* VirtualEthernet0/0/12 queue 2 (polling)
* VirtualEthernet0/0/13 queue 0 (polling)
* VirtualEthernet0/0/13 queue 2 (polling)
* Thread 2 (vpp_wk_1):
* node dpdk-input:
* GigabitEthernet7/0/1 queue 0 (polling)
* node vhost-user-input:
* VirtualEthernet0/0/12 queue 1 (polling)
* VirtualEthernet0/0/12 queue 3 (polling)
* VirtualEthernet0/0/13 queue 1 (polling)
* VirtualEthernet0/0/13 queue 3 (polling)
* @cliexend
* Example of how to assign a interface and queue to a worker thread:
* @cliexcmd{set interface rx-placement VirtualEthernet0/0/12 queue 1 worker 0}
* Example of how to display the interface placement:
* @cliexstart{show interface rx-placement}
* Thread 1 (vpp_wk_0):
* node dpdk-input:
* GigabitEthernet7/0/0 queue 0 (polling)
* node vhost-user-input:
* VirtualEthernet0/0/12 queue 0 (polling)
* VirtualEthernet0/0/12 queue 1 (polling)
* VirtualEthernet0/0/12 queue 2 (polling)
* VirtualEthernet0/0/13 queue 0 (polling)
* VirtualEthernet0/0/13 queue 2 (polling)
* Thread 2 (vpp_wk_1):
* node dpdk-input:
* GigabitEthernet7/0/1 queue 0 (polling)
* node vhost-user-input:
* VirtualEthernet0/0/12 queue 3 (polling)
* VirtualEthernet0/0/13 queue 1 (polling)
* VirtualEthernet0/0/13 queue 3 (polling)
* @cliexend
?*/
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (cmd_set_if_rx_placement,static) = {
.path = "set interface rx-placement",
.short_help = "set interface rx-placement <interface> [queue <n>] "
"[worker <n> | main]",
.function = set_interface_rx_placement,
.is_mp_safe = 1,
};
/* *INDENT-ON* */
int
set_hw_interface_tx_queue (u32 hw_if_index, u32 queue_id, uword *bitmap)
{
vnet_main_t *vnm = vnet_get_main ();
vlib_thread_main_t *vtm = vlib_get_thread_main ();
vnet_hw_if_tx_queue_t *txq;
u32 queue_index;
u32 thread_index;
/* highest set bit in bitmap should not exceed last worker thread index */
thread_index = clib_bitmap_last_set (bitmap);
if ((thread_index != ~0) && (thread_index >= vtm->n_vlib_mains))
return VNET_API_ERROR_INVALID_VALUE;
queue_index =
vnet_hw_if_get_tx_queue_index_by_id (vnm, hw_if_index, queue_id);
if (queue_index == ~0)
return VNET_API_ERROR_INVALID_QUEUE;
txq = vnet_hw_if_get_tx_queue (vnm, queue_index);
// free the existing bitmap
if (clib_bitmap_count_set_bits (txq->threads))
{
txq->shared_queue = 0;
clib_bitmap_free (txq->threads);
}
clib_bitmap_foreach (thread_index, bitmap)
vnet_hw_if_tx_queue_assign_thread (vnm, queue_index, thread_index);
vnet_hw_if_update_runtime_data (vnm, hw_if_index);
return 0;
}
static clib_error_t *
set_interface_tx_queue (vlib_main_t *vm, unformat_input_t *input,
vlib_cli_command_t *cmd)
{
clib_error_t *error = 0;
unformat_input_t _line_input, *line_input = &_line_input;
vnet_main_t *vnm = vnet_get_main ();
u32 hw_if_index = (u32) ~0;
u32 queue_id = (u32) 0;
uword *bitmap = 0;
int rv = 0;
if (!unformat_user (input, unformat_line_input, line_input))
return 0;
while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
{
if (unformat (line_input, "%U", unformat_vnet_hw_interface, vnm,
&hw_if_index))
;
else if (unformat (line_input, "queue %d", &queue_id))
;
else if (unformat (line_input, "threads %U", unformat_bitmap_list,
&bitmap))
;
else
{
error = clib_error_return (0, "parse error: '%U'",
format_unformat_error, line_input);
unformat_free (line_input);
return error;
}
}
unformat_free (line_input);
if (hw_if_index == (u32) ~0)
{
error = clib_error_return (0, "please specify valid interface name");
goto error;
}
rv = set_hw_interface_tx_queue (hw_if_index, queue_id, bitmap);
switch (rv)
{
case VNET_API_ERROR_INVALID_VALUE:
error = clib_error_return (
0, "please specify valid thread(s) - last thread index %u",
clib_bitmap_last_set (bitmap));
break;
case VNET_API_ERROR_INVALID_QUEUE:
error = clib_error_return (
0, "unknown queue %u on interface %s", queue_id,
vnet_get_hw_interface (vnet_get_main (), hw_if_index)->name);
break;
default:
break;
}
error:
clib_bitmap_free (bitmap);
return (error);
}
VLIB_CLI_COMMAND (cmd_set_if_tx_queue, static) = {
.path = "set interface tx-queue",
.short_help = "set interface tx-queue <interface> queue <n> "
"[threads <list>]",
.function = set_interface_tx_queue,
.is_mp_safe = 1,
};
clib_error_t *
set_interface_rss_queues (vlib_main_t * vm, u32 hw_if_index,
clib_bitmap_t * bitmap)
{
vnet_main_t *vnm = vnet_get_main ();
vnet_hw_interface_t *hi = vnet_get_hw_interface (vnm, hw_if_index);
return vnet_hw_interface_set_rss_queues (vnm, hi, bitmap);
}
static clib_error_t *
set_interface_rss_queues_fn (vlib_main_t * vm,
unformat_input_t * input,
vlib_cli_command_t * cmd)
{
clib_error_t *error = 0;
unformat_input_t _line_input, *line_input = &_line_input;
vnet_main_t *vnm = vnet_get_main ();
u32 hw_if_index = (u32) ~ 0;
clib_bitmap_t *bitmap = NULL;
if (!unformat_user (input, unformat_line_input, line_input))
return 0;
while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
{
if (unformat
(line_input, "%U", unformat_vnet_hw_interface, vnm, &hw_if_index))
;
else
if (unformat (line_input, "list %U", unformat_bitmap_list, &bitmap))
;
else
{
error = clib_error_return (0, "parse error: '%U'",
format_unformat_error, line_input);
unformat_free (line_input);
goto done;
}
}
unformat_free (line_input);
if (hw_if_index == (u32) ~ 0)
{
error = clib_error_return (0, "please specify valid interface name");
goto done;
}
if (bitmap == NULL)
{
error = clib_error_return (0, "please specify the valid rss queues");
goto done;
}
error = set_interface_rss_queues (vm, hw_if_index, bitmap);
done:
if (bitmap)
clib_bitmap_free (bitmap);
return (error);
}
/*?
* This command is used to set the rss queues of a given interface
* Not all the interfaces support this operation.
* To display the current rss queues, use the command
* '<em>show hardware-interfaces</em>'.
*
* @cliexpar
* Example of how to set the rss queues to 0,2-5,7 of an interface:
* @cliexstart{set interface rss queues VirtualFunctionEthernet18/1/0 list 0,2-5,7}
* @cliexend
?*/
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (cmd_set_interface_rss_queues,static) = {
.path = "set interface rss queues",
.short_help = "set interface rss queues <interface> <list <queue-list>>",
.function = set_interface_rss_queues_fn,
};
/* *INDENT-ON* */
static u8 *
format_vnet_pcap (u8 * s, va_list * args)
{
vnet_pcap_t *pp = va_arg (*args, vnet_pcap_t *);
int type = va_arg (*args, int);
int printed = 0;
if (type == 0)
{
if (pp->pcap_rx_enable)
{
s = format (s, "rx");
printed = 1;
}
if (pp->pcap_tx_enable)
{
if (printed)
s = format (s, " and ");
s = format (s, "tx");
printed = 1;
}
if (pp->pcap_drop_enable)
{
if (printed)
s = format (s, " and ");
s = format (s, "drop");
printed = 1;
}
return s;
}
s = format (s, "unknown type %d!", type);
return s;
}
int
vnet_pcap_dispatch_trace_configure (vnet_pcap_dispatch_trace_args_t * a)
{
vlib_main_t *vm = vlib_get_main ();
vnet_main_t *vnm = vnet_get_main ();
vnet_pcap_t *pp = &vnm->pcap;
pcap_main_t *pm = &pp->pcap_main;
vnet_classify_main_t *cm = &vnet_classify_main;
if (a->status)
{
if (pp->pcap_rx_enable || pp->pcap_tx_enable || pp->pcap_drop_enable)
{
vlib_cli_output
(vm, "pcap %U dispatch capture enabled: %d of %d pkts...",
format_vnet_pcap, pp, 0 /* print type */ ,
pm->n_packets_captured, pm->n_packets_to_capture);
vlib_cli_output (vm, "capture to file %s", pm->file_name);
}
else
vlib_cli_output (vm, "pcap dispatch capture disabled");
return 0;
}
/* Consistency checks */
/* Enable w/ capture already enabled not allowed */
if ((pp->pcap_rx_enable + pp->pcap_tx_enable + pp->pcap_drop_enable)
&& (a->rx_enable + a->tx_enable + a->drop_enable))
return VNET_API_ERROR_INVALID_VALUE;
/* Disable capture with capture already disabled, not interesting */
if (((pp->pcap_rx_enable + pp->pcap_tx_enable + pp->pcap_drop_enable) ==
0) &&
((a->rx_enable + a->tx_enable + a->drop_enable == 0)))
return VNET_API_ERROR_VALUE_EXIST;
/* Change number of packets to capture while capturing */
if ((pp->pcap_rx_enable + pp->pcap_tx_enable + pp->pcap_drop_enable)
&& (a->rx_enable + a->tx_enable + a->drop_enable)
&& (pm->n_packets_to_capture != a->packets_to_capture))
return VNET_API_ERROR_INVALID_VALUE_2;
/* Classify filter specified, but no classify filter configured */
if ((a->rx_enable + a->tx_enable + a->drop_enable) && a->filter &&
(!cm->classify_table_index_by_sw_if_index ||
cm->classify_table_index_by_sw_if_index[0] == ~0))
return VNET_API_ERROR_NO_SUCH_LABEL;
if (a->rx_enable + a->tx_enable + a->drop_enable)
{
void *save_pcap_data;
/* Sanity check max bytes per pkt */
if (a->max_bytes_per_pkt < 32 || a->max_bytes_per_pkt > 9000)
return VNET_API_ERROR_INVALID_MEMORY_SIZE;
/* Clean up from previous run, if any */
vec_reset_length (pm->pcap_data);
/* Throw away the data buffer? */
if (a->free_data)
vec_free (pm->pcap_data);
save_pcap_data = pm->pcap_data;
memset (pm, 0, sizeof (*pm));
pm->pcap_data = save_pcap_data;
vec_validate_aligned (vnet_trace_placeholder, 2048,
CLIB_CACHE_LINE_BYTES);
if (pm->lock == 0)
clib_spinlock_init (&(pm->lock));
if (a->filename == 0)
{
u8 *stem = 0;
if (a->rx_enable)
stem = format (stem, "rx");
if (a->tx_enable)
stem = format (stem, "tx");
if (a->drop_enable)
stem = format (stem, "drop");
a->filename = format (0, "/tmp/%v.pcap%c", stem, 0);
vec_free (stem);
}
pm->file_name = (char *) a->filename;
pm->n_packets_captured = 0;
pm->packet_type = PCAP_PACKET_TYPE_ethernet;
/* Preallocate the data vector? */
if (a->preallocate_data)
{
vec_validate
(pm->pcap_data, a->packets_to_capture
* ((sizeof (pcap_packet_header_t) + a->max_bytes_per_pkt)));
vec_reset_length (pm->pcap_data);
}
pm->n_packets_to_capture = a->packets_to_capture;
pp->pcap_sw_if_index = a->sw_if_index;
if (a->filter)
pp->filter_classify_table_index =
cm->classify_table_index_by_sw_if_index[0];
else
pp->filter_classify_table_index = ~0;
pp->pcap_error_index = a->drop_err;
pp->pcap_rx_enable = a->rx_enable;
pp->pcap_tx_enable = a->tx_enable;
pp->pcap_drop_enable = a->drop_enable;
pp->max_bytes_per_pkt = a->max_bytes_per_pkt;
}
else
{
pp->pcap_rx_enable = 0;
pp->pcap_tx_enable = 0;
pp->pcap_drop_enable = 0;
pp->filter_classify_table_index = ~0;
pp->pcap_error_index = ~0;
if (pm->n_packets_captured)
{
clib_error_t *error;
pm->n_packets_to_capture = pm->n_packets_captured;
vlib_cli_output (vm, "Write %d packets to %s, and stop capture...",
pm->n_packets_captured, pm->file_name);
error = pcap_write (pm);
if (pm->flags & PCAP_MAIN_INIT_DONE)
pcap_close (pm);
/* Report I/O errors... */
if (error)
{
clib_error_report (error);
return VNET_API_ERROR_SYSCALL_ERROR_1;
}
vec_free (pm->file_name);
if (a->free_data)
vec_free (pm->pcap_data);
return 0;
}
else
return VNET_API_ERROR_NO_SUCH_ENTRY;
}
return 0;
}
static clib_error_t *
pcap_trace_command_fn (vlib_main_t * vm,
unformat_input_t * input, vlib_cli_command_t * cmd)
{
unformat_input_t _line_input, *line_input = &_line_input;
vnet_pcap_dispatch_trace_args_t _a, *a = &_a;
vnet_main_t *vnm = vnet_get_main ();
u8 *filename = 0;
u32 max = 1000;
u32 max_bytes_per_pkt = 512;
int rv;
int rx_enable = 0;
int tx_enable = 0;
int preallocate_data = 0;
int drop_enable = 0;
int status = 0;
int filter = 0;
int free_data = 0;
u32 sw_if_index = 0; /* default: any interface */
vlib_error_t drop_err = ~0; /* default: any error */
/* Get a line of input. */
if (!unformat_user (input, unformat_line_input, line_input))
return 0;
while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
{
if (unformat (line_input, "rx"))
rx_enable = 1;
else if (unformat (line_input, "tx"))
tx_enable = 1;
else if (unformat (line_input, "drop"))
drop_enable = 1;
else if (unformat (line_input, "off"))
rx_enable = tx_enable = drop_enable = 0;
else if (unformat (line_input, "max-bytes-per-pkt %u",
&max_bytes_per_pkt))
;
else if (unformat (line_input, "max %d", &max))
;
else if (unformat (line_input, "packets-to-capture %d", &max))
;
else if (unformat (line_input, "file %U", unformat_vlib_tmpfile,
&filename))
;
else if (unformat (line_input, "status %=", &status, 1))
;
else if (unformat (line_input, "intfc %U",
unformat_vnet_sw_interface, vnm, &sw_if_index))
;
else if (unformat (line_input, "interface %U",
unformat_vnet_sw_interface, vnm, &sw_if_index))
;
else if (unformat (line_input, "error %U", unformat_vlib_error, vm,
&drop_err))
;
else if (unformat (line_input, "preallocate-data %=",
&preallocate_data, 1))
;
else if (unformat (line_input, "free-data %=", &free_data, 1))
;
else if (unformat (line_input, "intfc any")
|| unformat (line_input, "interface any"))
sw_if_index = 0;
else if (unformat (line_input, "filter"))
filter = 1;
else
{
return clib_error_return (0, "unknown input `%U'",
format_unformat_error, line_input);
}
}
unformat_free (line_input);
/* no need for memset (a, 0, sizeof (*a)), set all fields here. */
a->filename = filename;
a->rx_enable = rx_enable;
a->tx_enable = tx_enable;
a->preallocate_data = preallocate_data;
a->free_data = free_data;
a->drop_enable = drop_enable;
a->status = status;
a->packets_to_capture = max;
a->sw_if_index = sw_if_index;
a->filter = filter;
a->max_bytes_per_pkt = max_bytes_per_pkt;
a->drop_err = drop_err;
rv = vnet_pcap_dispatch_trace_configure (a);
switch (rv)
{
case 0:
break;
case VNET_API_ERROR_INVALID_VALUE:
return clib_error_return (0, "dispatch trace already enabled...");
case VNET_API_ERROR_VALUE_EXIST:
return clib_error_return (0, "dispatch trace already disabled...");
case VNET_API_ERROR_INVALID_VALUE_2:
return clib_error_return
(0, "can't change number of records to capture while tracing...");
case VNET_API_ERROR_SYSCALL_ERROR_1:
return clib_error_return (0, "I/O writing trace capture...");
case VNET_API_ERROR_NO_SUCH_ENTRY:
return clib_error_return (0, "No packets captured...");
case VNET_API_ERROR_INVALID_MEMORY_SIZE:
return clib_error_return (0,
"Max bytes per pkt must be > 32, < 9000...");
case VNET_API_ERROR_NO_SUCH_LABEL:
return clib_error_return
(0, "No classify filter configured, see 'classify filter...'");
default:
vlib_cli_output (vm, "WARNING: trace configure returned %d", rv);
break;
}
return 0;
}
/*?
* This command is used to start or stop a packet capture, or show
* the status of packet capture.
*
* This command has the following optional parameters:
*
*
* - <b>rx</b> - Capture received packets
*
* - <b>tx</b> - Capture transmitted packets
*
* - <b>drop</b> - Capture dropped packets
*
* - <b>off</b> - Stop capturing packets, write results to the specified file
*
* - <b>max <nn></b> - Depth of local buffer. Once '<em>nn</em>' number
* of packets have been received, buffer is flushed to file. Once another
* '<em>nn</em>' number of packets have been received, buffer is flushed
* to file, overwriting previous write. If not entered, value defaults
* to 100. Can only be updated if packet capture is off.
*
* - <b>max-bytes-per-pkt <nnnn></b> - Maximum number of bytes to capture
* for each packet. Must be >= 32, <= 9000.
*
* - <b>preallocate-data</b> - Preallocate the data buffer, to avoid
* vector expansion delays during pcap capture
*
* - <b>free-data</b> - Free the data buffer. Ordinarily it's a feature
* to retain the data buffer so this option is seldom used.
*
* - <b>intfc <interface-name>|any</b> - Used to specify a given interface,
* or use '<em>any</em>' to run packet capture on all interfaces.
* '<em>any</em>' is the default if not provided. Settings from a previous
* packet capture are preserved, so '<em>any</em>' can be used to reset
* the interface setting.
*
* - <b>filter</b> - Use the pcap rx / tx / drop trace filter, which
* must be configured. Use <b>classify filter pcap...</b> to configure the
* filter. The filter will only be executed if the per-interface or
* any-interface tests fail.
*
* - <b>error <node>.<error></b> - filter packets based on a specific error.
* For example: error {ip4-udp-lookup}.{No listener for dst port}
*
* - <b>file <name></b> - Used to specify the output filename. The file will
* be placed in the '<em>/tmp</em>' directory, so only the filename is
* supported. Directory should not be entered. If file already exists, file
* will be overwritten. If no filename is provided, the file will be
* named "/tmp/rx.pcap", "/tmp/tx.pcap", "/tmp/rxandtx.pcap", etc.
* Can only be updated if packet capture is off.
*
* - <b>status</b> - Displays the current status and configured attributes
* associated with a packet capture. If packet capture is in progress,
* '<em>status</em>' also will return the number of packets currently in
* the local buffer. All additional attributes entered on command line
* with '<em>status</em>' will be ignored and not applied.
*
* @cliexpar
* Example of how to display the status of a tx packet capture when off:
* @cliexstart{pcap trace status}
* max is 100, for any interface to file /tmp/vpe.pcap
* pcap tx capture is off...
* @cliexend
* Example of how to start a tx packet capture:
* @cliexstart{pcap trace tx max 35 intfc GigabitEthernet0/8/0 file
* vppTest.pcap}
* @cliexend
* Example of how to display the status of a tx packet capture in progress:
* @cliexstart{pcap trace status}
* max is 35, for interface GigabitEthernet0/8/0 to file /tmp/vppTest.pcap
* pcap tx capture is on: 20 of 35 pkts...
* @cliexend
* Example of how to stop a tx packet capture:
* @cliexstart{pcap trace off}
* captured 21 pkts...
* saved to /tmp/vppTest.pcap...
* @cliexend
?*/
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (pcap_tx_trace_command, static) = {
.path = "pcap trace",
.short_help =
"pcap trace [rx] [tx] [drop] [off] [max <nn>] [intfc <interface>|any]\n"
" [file <name>] [status] [max-bytes-per-pkt <nnnn>][filter]\n"
" [preallocate-data][free-data]",
.function = pcap_trace_command_fn,
};
/* *INDENT-ON* */
static clib_error_t *
set_interface_name (vlib_main_t *vm, unformat_input_t *input,
vlib_cli_command_t *cmd)
{
clib_error_t *error = 0;
unformat_input_t _line_input, *line_input = &_line_input;
vnet_main_t *vnm = vnet_get_main ();
u32 hw_if_index = ~0;
char *name = 0;
if (!unformat_user (input, unformat_line_input, line_input))
return 0;
while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
{
if (unformat (line_input, "%U %s", unformat_vnet_hw_interface, vnm,
&hw_if_index, &name))
;
else
{
error = clib_error_return (0, "parse error: '%U'",
format_unformat_error, line_input);
unformat_free (line_input);
vec_free (name);
return error;
}
}
unformat_free (line_input);
if (hw_if_index == (u32) ~0 || name == 0)
{
vec_free (name);
error = clib_error_return (0, "please specify valid interface name");
return error;
}
error = vnet_rename_interface (vnm, hw_if_index, name);
vec_free (name);
return (error);
}
VLIB_CLI_COMMAND (cmd_set_if_name, static) = {
.path = "set interface name",
.short_help = "set interface name <interface-name> <new-interface-name>",
.function = set_interface_name,
.is_mp_safe = 1,
};
static clib_error_t *
set_interface_tx_hash_cmd (vlib_main_t *vm, unformat_input_t *input,
vlib_cli_command_t *cmd)
{
clib_error_t *error = 0;
unformat_input_t _line_input, *line_input = &_line_input;
vnet_main_t *vnm = vnet_get_main ();
vnet_hw_interface_t *hi;
u8 *hash_name = 0;
u32 hw_if_index = (u32) ~0;
vnet_hash_fn_t hf;
vnet_hash_fn_type_t ftype;
if (!unformat_user (input, unformat_line_input, line_input))
return 0;
while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
{
if (unformat (line_input, "%U", unformat_vnet_hw_interface, vnm,
&hw_if_index))
;
else if (unformat (line_input, "hash-name %s", &hash_name))
;
else
{
error = clib_error_return (0, "parse error: '%U'",
format_unformat_error, line_input);
unformat_free (line_input);
return error;
}
}
unformat_free (line_input);
if (hw_if_index == (u32) ~0)
{
error = clib_error_return (0, "please specify valid interface name");
goto error;
}
if (hash_name == 0)
{
error = clib_error_return (0, "hash-name is required");
goto error;
}
hi = vnet_get_hw_interface (vnm, hw_if_index);
ftype =
vnet_get_hw_interface_class (vnm, hi->hw_class_index)->tx_hash_fn_type;
hf = vnet_hash_function_from_name ((const char *) hash_name, ftype);
if (!hf)
{
error = clib_error_return (0, "please specify valid hash name");
goto error;
}
hi->hf = hf;
error:
vec_free (hash_name);
return (error);
}
VLIB_CLI_COMMAND (cmd_set_if_tx_hash, static) = {
.path = "set interface tx-hash",
.short_help = "set interface tx-hash <interface> hash-name <hash-name>",
.function = set_interface_tx_hash_cmd,
};
static clib_error_t *
show_tx_hash (vlib_main_t *vm, unformat_input_t *input,
vlib_cli_command_t *cmd)
{
clib_error_t *error = 0;
unformat_input_t _line_input, *line_input = &_line_input;
vnet_main_t *vnm = vnet_get_main ();
vnet_hw_interface_t *hi;
vnet_hash_function_registration_t *hash;
u32 hw_if_index = (u32) ~0;
vnet_hash_fn_type_t ftype;
if (!unformat_user (input, unformat_line_input, line_input))
return 0;
while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
{
if (unformat (line_input, "%U", unformat_vnet_hw_interface, vnm,
&hw_if_index))
;
else
{
error = clib_error_return (0, "parse error: '%U'",
format_unformat_error, line_input);
unformat_free (line_input);
goto error;
}
}
unformat_free (line_input);
if (hw_if_index == (u32) ~0)
{
error = clib_error_return (0, "please specify valid interface name");
goto error;
}
hi = vnet_get_hw_interface (vnm, hw_if_index);
ftype =
vnet_get_hw_interface_class (vnm, hi->hw_class_index)->tx_hash_fn_type;
if (hi->hf)
{
hash = vnet_hash_function_from_func (hi->hf, ftype);
if (hash)
vlib_cli_output (vm, "%U", format_vnet_hash, hash);
else
vlib_cli_output (vm, "no matching hash function found");
}
else
vlib_cli_output (vm, "no hashing function set");
error:
return (error);
}
VLIB_CLI_COMMAND (cmd_show_tx_hash, static) = {
.path = "show interface tx-hash",
.short_help = "show interface tx-hash [interface]",
.function = show_tx_hash,
};
/*
* fd.io coding-style-patch-verification: ON
*
* Local Variables:
* eval: (c-set-style "gnu")
* End:
*/