The Quality-of-Service (QoS) scheduler performs egress-traffic management by prioritizing the transmission of the packets of different type services and subscribers based on the Service Level Agreements (SLAs). The QoS scheduler can be enabled on one or more NIC output interfaces depending upon the requirement.
The QoS scheduler supports a number of scheduling and shaping levels which construct hierarchical-tree. The first level in the hierarchy is port (i.e. the physical interface) that constitutes the root node of the tree. The subsequent level is subport which represents the group of the users/subscribers. The individual user/subscriber is represented by the pipe at the next level. Each user can have different traffic type based on the criteria of specific loss rate, jitter, and latency. These traffic types are represented at the traffic-class level in the form of different traffic- classes. The last level contains number of queues which are grouped together to host the packets of the specific class type traffic.
The QoS scheduler implementation requires flow classification, enqueue and dequeue operations. The flow classification is mandatory stage for HQoS where incoming packets are classified by mapping the packet fields information to 5-tuple (HQoS subport, pipe, traffic class, queue within traffic class, and color) and storing that information in mbuf sched field. The enqueue operation uses this information to determine the queue for storing the packet, and at this stage, if the specific queue is full, QoS drops the packet. The dequeue operation consists of scheduling the packet based on its length and available credits, and handing over the scheduled packet to the output interface.
For more information on QoS Scheduler, please refer DPDK Programmer's Guide- http://dpdk.org/doc/guides/prog_guide/qos_framework.html
Following illustrates the default HQoS configuration for each 10GbE output port:
Single subport (subport 0):
4K pipes per subport 0 (pipes 0 .. 4095) with identical configuration:
port {
rate 1250000000 /* Assuming 10GbE port */
frame_overhead 24 /* Overhead fields per Ethernet frame:
* 7B (Preamble) +
* 1B (Start of Frame Delimiter (SFD)) +
* 4B (Frame Check Sequence (FCS)) +
* 12B (Inter Frame Gap (IFG))
*/
mtu 1522 /* Assuming Ethernet/IPv4 pkt (FCS not included) */
n_subports_per_port 1 /* Number of subports per output interface */
n_pipes_per_subport 4096 /* Number of pipes (users/subscribers) */
queue_sizes 64 64 64 64 /* Packet queue size for each traffic class.
* All queues within the same pipe traffic class
* have the same size. Queues from different
* pipes serving the same traffic class have
* the same size. */
}
subport 0 {
tb_rate 1250000000 /* Subport level token bucket rate (bytes per second) */
tb_size 1000000 /* Subport level token bucket size (bytes) */
tc0_rate 1250000000 /* Subport level token bucket rate for traffic class 0 (bytes per second) */
tc1_rate 1250000000 /* Subport level token bucket rate for traffic class 1 (bytes per second) */
tc2_rate 1250000000 /* Subport level token bucket rate for traffic class 2 (bytes per second) */
tc3_rate 1250000000 /* Subport level token bucket rate for traffic class 3 (bytes per second) */
tc_period 10 /* Time interval for refilling the token bucket associated with traffic class (Milliseconds) */
pipe 0 4095 profile 0 /* pipes (users/subscribers) configured with pipe profile 0 */
}
pipe_profile 0 {
tb_rate 305175 /* Pipe level token bucket rate (bytes per second) */
tb_size 1000000 /* Pipe level token bucket size (bytes) */
tc0_rate 305175 /* Pipe level token bucket rate for traffic class 0 (bytes per second) */
tc1_rate 305175 /* Pipe level token bucket rate for traffic class 1 (bytes per second) */
tc2_rate 305175 /* Pipe level token bucket rate for traffic class 2 (bytes per second) */
tc3_rate 305175 /* Pipe level token bucket rate for traffic class 3 (bytes per second) */
tc_period 40 /* Time interval for refilling the token bucket associated with traffic class at pipe level (Milliseconds) */
tc3_oversubscription_weight 1 /* Weight traffic class 3 oversubscription */
tc0_wrr_weights 1 1 1 1 /* Pipe queues WRR weights for traffic class 0 */
tc1_wrr_weights 1 1 1 1 /* Pipe queues WRR weights for traffic class 1 */
tc2_wrr_weights 1 1 1 1 /* Pipe queues WRR weights for traffic class 2 */
tc3_wrr_weights 1 1 1 1 /* Pipe queues WRR weights for traffic class 3 */
}
red {
tc0_wred_min 48 40 32 /* Minimum threshold for traffic class 0 queue (min_th) in number of packets */
tc0_wred_max 64 64 64 /* Maximum threshold for traffic class 0 queue (max_th) in number of packets */
tc0_wred_inv_prob 10 10 10 /* Inverse of packet marking probability for traffic class 0 queue (maxp = 1 / maxp_inv) */
tc0_wred_weight 9 9 9 /* Traffic Class 0 queue weight */
tc1_wred_min 48 40 32 /* Minimum threshold for traffic class 1 queue (min_th) in number of packets */
tc1_wred_max 64 64 64 /* Maximum threshold for traffic class 1 queue (max_th) in number of packets */
tc1_wred_inv_prob 10 10 10 /* Inverse of packet marking probability for traffic class 1 queue (maxp = 1 / maxp_inv) */
tc1_wred_weight 9 9 9 /* Traffic Class 1 queue weight */
tc2_wred_min 48 40 32 /* Minimum threshold for traffic class 2 queue (min_th) in number of packets */
tc2_wred_max 64 64 64 /* Maximum threshold for traffic class 2 queue (max_th) in number of packets */
tc2_wred_inv_prob 10 10 10 /* Inverse of packet marking probability for traffic class 2 queue (maxp = 1 / maxp_inv) */
tc2_wred_weight 9 9 9 /* Traffic Class 2 queue weight */
tc3_wred_min 48 40 32 /* Minimum threshold for traffic class 3 queue (min_th) in number of packets */
tc3_wred_max 64 64 64 /* Maximum threshold for traffic class 3 queue (max_th) in number of packets */
tc3_wred_inv_prob 10 10 10 /* Inverse of packet marking probability for traffic class 3 queue (maxp = 1 / maxp_inv) */
tc3_wred_weight 9 9 9 /* Traffic Class 3 queue weight */
}
The Hierarchical Quality-of-Service (HQoS) scheduler object could be seen as part of the logical NIC output interface. To enable HQoS on specific output interface, vpp startup.conf file has to be configured accordingly. The output interface that requires HQoS, should have "hqos" parameter specified in dpdk section. Another optional parameter "hqos-thread" has been defined which can be used to associate the output interface with specific hqos thread. In cpu section of the config file, "corelist-hqos-threads" is introduced to assign logical cpu cores to run the HQoS threads. A HQoS thread can run multiple HQoS objects each associated with different output interfaces. All worker threads instead of writing packets to NIC TX queue directly, write the packets to a software queues. The hqos_threads read the software queues, and enqueue the packets to HQoS objects, as well as dequeue packets from HQOS objects and write them to NIC output interfaces. The worker threads need to be able to send the packets to any output interface, therefore, each HQoS object associated with NIC output interface should have software queues equal to worker threads count.
Following illustrates the sample startup configuration file with 4x worker threads feeding 2x hqos threads that handle each QoS scheduler for 1x output interface.
dpdk {
socket-mem 16384,16384
dev 0000:02:00.0 {
num-rx-queues 2
hqos
}
dev 0000:06:00.0 {
num-rx-queues 2
hqos
}
num-mbufs 1000000
}
cpu {
main-core 0
corelist-workers 1, 2, 3, 4
corelist-hqos-threads 5, 6
}
Each QoS scheduler instance is initialised with default parameters required to configure hqos port, subport, pipe and queues. Some of the parameters can be re-configured in run-time through CLI commands.
Following commands can be used to configure QoS scheduler parameters.
The command below can be used to set the subport level parameters such as token bucket rate (bytes per seconds), token bucket size (bytes), traffic class rates (bytes per seconds) and token update period (Milliseconds).
set dpdk interface hqos subport <interface> subport <subport_id> [rate <n>]
[bktsize <n>] [tc0 <n>] [tc1 <n>] [tc2 <n>] [tc3 <n>] [period <n>]
For setting the pipe profile, following command can be used.
set dpdk interface hqos pipe <interface> subport <subport_id> pipe <pipe_id>
profile <profile_id>
To assign QoS scheduler instance to the specific thread, following command can be used.
set dpdk interface hqos placement <interface> thread <n>
The command below is used to set the packet fields required for classifying the incoming packet. As a result of classification process, packet field information will be mapped to 5 tuples (subport, pipe, traffic class, pipe, color) and stored in packet mbuf.
set dpdk interface hqos pktfield <interface> id subport|pipe|tc offset <n>
mask <hex-mask>
The DSCP table entries used for identifying the traffic class and queue can be set using the command below;
set dpdk interface hqos tctbl <interface> entry <map_val> tc <tc_id> queue <queue_id>
The QoS Scheduler configuration can displayed using the command below.
vpp# show dpdk interface hqos TenGigabitEthernet2/0/0
Thread:
Input SWQ size = 4096 packets
Enqueue burst size = 256 packets
Dequeue burst size = 220 packets
Packet field 0: slab position = 0, slab bitmask = 0x0000000000000000 (subport)
Packet field 1: slab position = 40, slab bitmask = 0x0000000fff000000 (pipe)
Packet field 2: slab position = 8, slab bitmask = 0x00000000000000fc (tc)
Packet field 2 tc translation table: ([Mapped Value Range]: tc/queue tc/queue ...)
[ 0 .. 15]: 0/0 0/1 0/2 0/3 1/0 1/1 1/2 1/3 2/0 2/1 2/2 2/3 3/0 3/1 3/2 3/3
[16 .. 31]: 0/0 0/1 0/2 0/3 1/0 1/1 1/2 1/3 2/0 2/1 2/2 2/3 3/0 3/1 3/2 3/3
[32 .. 47]: 0/0 0/1 0/2 0/3 1/0 1/1 1/2 1/3 2/0 2/1 2/2 2/3 3/0 3/1 3/2 3/3
[48 .. 63]: 0/0 0/1 0/2 0/3 1/0 1/1 1/2 1/3 2/0 2/1 2/2 2/3 3/0 3/1 3/2 3/3
Port:
Rate = 1250000000 bytes/second
MTU = 1514 bytes
Frame overhead = 24 bytes
Number of subports = 1
Number of pipes per subport = 4096
Packet queue size: TC0 = 64, TC1 = 64, TC2 = 64, TC3 = 64 packets
Number of pipe profiles = 1
Subport 0:
Rate = 120000000 bytes/second
Token bucket size = 1000000 bytes
Traffic class rate: TC0 = 120000000, TC1 = 120000000, TC2 = 120000000, TC3 = 120000000 bytes/second
TC period = 10 milliseconds
Pipe profile 0:
Rate = 305175 bytes/second
Token bucket size = 1000000 bytes
Traffic class rate: TC0 = 305175, TC1 = 305175, TC2 = 305175, TC3 = 305175 bytes/second
TC period = 40 milliseconds
TC0 WRR weights: Q0 = 1, Q1 = 1, Q2 = 1, Q3 = 1
TC1 WRR weights: Q0 = 1, Q1 = 1, Q2 = 1, Q3 = 1
TC2 WRR weights: Q0 = 1, Q1 = 1, Q2 = 1, Q3 = 1
TC3 WRR weights: Q0 = 1, Q1 = 1, Q2 = 1, Q3 = 1
The QoS Scheduler placement over the logical cpu cores can be displayed using below command.
vpp# show dpdk interface hqos placement
Thread 5 (vpp_hqos-threads_0 at lcore 5):
TenGigabitEthernet2/0/0 queue 0
Thread 6 (vpp_hqos-threads_1 at lcore 6):
TenGigabitEthernet4/0/1 queue 0
This section explains the available binary APIs for configuring QoS scheduler parameters in run-time.
The following API can be used to set the pipe profile of a pipe that belongs to a given subport:
sw_interface_set_dpdk_hqos_pipe rx <intfc> | sw_if_index <id>
subport <subport-id> pipe <pipe-id> profile <profile-id>
The data structures used for set the pipe profile parameter are as follows;
/** \\brief DPDK interface HQoS pipe profile set request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_index - the interface
@param subport - subport ID
@param pipe - pipe ID within its subport
@param profile - pipe profile ID
*/
define sw_interface_set_dpdk_hqos_pipe {
u32 client_index;
u32 context;
u32 sw_if_index;
u32 subport;
u32 pipe;
u32 profile;
};
/** \\brief DPDK interface HQoS pipe profile set reply
@param context - sender context, to match reply w/ request
@param retval - request return code
*/
define sw_interface_set_dpdk_hqos_pipe_reply {
u32 context;
i32 retval;
};
The following API can be used to set the subport level parameters, for example- token bucket rate (bytes per seconds), token bucket size (bytes), traffic class rate (bytes per seconds) and tokens update period.
sw_interface_set_dpdk_hqos_subport rx <intfc> | sw_if_index <id>
subport <subport-id> [rate <n>] [bktsize <n>]
[tc0 <n>] [tc1 <n>] [tc2 <n>] [tc3 <n>] [period <n>]
The data structures used for set the subport level parameter are as follows;
/** \\brief DPDK interface HQoS subport parameters set request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_index - the interface
@param subport - subport ID
@param tb_rate - subport token bucket rate (measured in bytes/second)
@param tb_size - subport token bucket size (measured in credits)
@param tc_rate - subport traffic class 0 .. 3 rates (measured in bytes/second)
@param tc_period - enforcement period for rates (measured in milliseconds)
*/
define sw_interface_set_dpdk_hqos_subport {
u32 client_index;
u32 context;
u32 sw_if_index;
u32 subport;
u32 tb_rate;
u32 tb_size;
u32 tc_rate[4];
u32 tc_period;
};
/** \\brief DPDK interface HQoS subport parameters set reply
@param context - sender context, to match reply w/ request
@param retval - request return code
*/
define sw_interface_set_dpdk_hqos_subport_reply {
u32 context;
i32 retval;
};
The following API can be used set the DSCP table entry. The DSCP table have 64 entries to map the packet DSCP field onto traffic class and hqos input queue.
sw_interface_set_dpdk_hqos_tctbl rx <intfc> | sw_if_index <id>
entry <n> tc <n> queue <n>
The data structures used for setting DSCP table entries are given below.
/** \\brief DPDK interface HQoS tctbl entry set request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_index - the interface
@param entry - entry index ID
@param tc - traffic class (0 .. 3)
@param queue - traffic class queue (0 .. 3)
*/
define sw_interface_set_dpdk_hqos_tctbl {
u32 client_index;
u32 context;
u32 sw_if_index;
u32 entry;
u32 tc;
u32 queue;
};
/** \\brief DPDK interface HQoS tctbl entry set reply
@param context - sender context, to match reply w/ request
@param retval - request return code
*/
define sw_interface_set_dpdk_hqos_tctbl_reply {
u32 context;
i32 retval;
};