| /* |
| * Copyright (c) 2015 Cisco and/or its affiliates. |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| /** |
| * @file |
| * @brief Common utility functions for IPv4 and IPv6 VXLAN GPE tunnels |
| * |
| */ |
| #include <vnet/vxlan-gpe/vxlan_gpe.h> |
| #include <vnet/fib/fib.h> |
| #include <vnet/ip/format.h> |
| #include <vnet/fib/fib_entry.h> |
| #include <vnet/fib/fib_table.h> |
| #include <vnet/fib/fib_entry_track.h> |
| #include <vnet/mfib/mfib_table.h> |
| #include <vnet/adj/adj_mcast.h> |
| #include <vnet/interface.h> |
| #include <vlib/vlib.h> |
| |
| /** |
| * @file |
| * @brief VXLAN-GPE. |
| * |
| * VXLAN-GPE provides the features needed to allow L2 bridge domains (BDs) |
| * to span multiple servers. This is done by building an L2 overlay on |
| * top of an L3 network underlay using VXLAN-GPE tunnels. |
| * |
| * This makes it possible for servers to be co-located in the same data |
| * center or be separated geographically as long as they are reachable |
| * through the underlay L3 network. |
| * |
| * You can refer to this kind of L2 overlay bridge domain as a VXLAN-GPE segment. |
| */ |
| |
| vxlan_gpe_main_t vxlan_gpe_main; |
| |
| static u8 * |
| format_decap_next (u8 * s, va_list * args) |
| { |
| vxlan_gpe_tunnel_t *t = va_arg (*args, vxlan_gpe_tunnel_t *); |
| |
| switch (t->protocol) |
| { |
| case VXLAN_GPE_PROTOCOL_IP4: |
| s = format (s, "protocol ip4 fib-idx %d", t->decap_fib_index); |
| break; |
| case VXLAN_GPE_PROTOCOL_IP6: |
| s = format (s, "protocol ip6 fib-idx %d", t->decap_fib_index); |
| break; |
| case VXLAN_GPE_PROTOCOL_ETHERNET: |
| s = format (s, "protocol ethernet"); |
| break; |
| case VXLAN_GPE_PROTOCOL_NSH: |
| s = format (s, "protocol nsh"); |
| break; |
| default: |
| s = format (s, "protocol unknown %d", t->protocol); |
| } |
| |
| return s; |
| } |
| |
| /** |
| * @brief Format function for VXLAN GPE tunnel |
| * |
| * @param *s formatting string |
| * @param *args |
| * |
| * @return *s formatted string |
| * |
| */ |
| u8 * |
| format_vxlan_gpe_tunnel (u8 * s, va_list * args) |
| { |
| vxlan_gpe_tunnel_t *t = va_arg (*args, vxlan_gpe_tunnel_t *); |
| vxlan_gpe_main_t *ngm = &vxlan_gpe_main; |
| |
| s = format (s, "[%d] lcl %U rmt %U vni %d fib-idx %d sw-if-idx %d ", |
| t - ngm->tunnels, |
| format_ip46_address, &t->local, IP46_TYPE_ANY, |
| format_ip46_address, &t->remote, IP46_TYPE_ANY, |
| t->vni, t->encap_fib_index, t->sw_if_index); |
| |
| #if 0 |
| /* next_dpo not yet used by vxlan-gpe-encap node */ |
| s = format (s, "encap-dpo-idx %d ", t->next_dpo.dpoi_index); |
| */ |
| #endif |
| s = format (s, "decap-next-%U ", format_decap_next, t); |
| |
| if (PREDICT_FALSE (ip46_address_is_multicast (&t->remote))) |
| s = format (s, "mcast-sw-if-idx %d ", t->mcast_sw_if_index); |
| |
| return s; |
| } |
| |
| /** |
| * @brief Naming for VXLAN GPE tunnel |
| * |
| * @param *s formatting string |
| * @param *args |
| * |
| * @return *s formatted string |
| * |
| */ |
| static u8 * |
| format_vxlan_gpe_name (u8 * s, va_list * args) |
| { |
| u32 dev_instance = va_arg (*args, u32); |
| return format (s, "vxlan_gpe_tunnel%d", dev_instance); |
| } |
| |
| /** |
| * @brief CLI function for VXLAN GPE admin up/down |
| * |
| * @param *vnm |
| * @param hw_if_index |
| * @param flag |
| * |
| * @return *rc |
| * |
| */ |
| static clib_error_t * |
| vxlan_gpe_interface_admin_up_down (vnet_main_t * vnm, u32 hw_if_index, |
| u32 flags) |
| { |
| u32 hw_flags = (flags & VNET_SW_INTERFACE_FLAG_ADMIN_UP) ? |
| VNET_HW_INTERFACE_FLAG_LINK_UP : 0; |
| vnet_hw_interface_set_flags (vnm, hw_if_index, hw_flags); |
| |
| return 0; |
| } |
| |
| /* *INDENT-OFF* */ |
| VNET_DEVICE_CLASS (vxlan_gpe_device_class,static) = { |
| .name = "VXLAN_GPE", |
| .format_device_name = format_vxlan_gpe_name, |
| .format_tx_trace = format_vxlan_gpe_encap_trace, |
| .admin_up_down_function = vxlan_gpe_interface_admin_up_down, |
| }; |
| /* *INDENT-ON* */ |
| |
| |
| /** |
| * @brief Formatting function for tracing VXLAN GPE with length |
| * |
| * @param *s |
| * @param *args |
| * |
| * @return *s |
| * |
| */ |
| static u8 * |
| format_vxlan_gpe_header_with_length (u8 * s, va_list * args) |
| { |
| u32 dev_instance = va_arg (*args, u32); |
| s = format (s, "unimplemented dev %u", dev_instance); |
| return s; |
| } |
| |
| /* *INDENT-OFF* */ |
| VNET_HW_INTERFACE_CLASS (vxlan_gpe_hw_class) = { |
| .name = "VXLAN_GPE", |
| .format_header = format_vxlan_gpe_header_with_length, |
| .build_rewrite = default_build_rewrite, |
| }; |
| /* *INDENT-ON* */ |
| |
| static void |
| vxlan_gpe_tunnel_restack_dpo (vxlan_gpe_tunnel_t * t) |
| { |
| dpo_id_t dpo = DPO_INVALID; |
| u32 encap_index = vxlan_gpe_encap_node.index; |
| fib_forward_chain_type_t forw_type = ip46_address_is_ip4 (&t->remote) ? |
| FIB_FORW_CHAIN_TYPE_UNICAST_IP4 : FIB_FORW_CHAIN_TYPE_UNICAST_IP6; |
| |
| fib_entry_contribute_forwarding (t->fib_entry_index, forw_type, &dpo); |
| dpo_stack_from_node (encap_index, &t->next_dpo, &dpo); |
| dpo_reset (&dpo); |
| } |
| |
| static vxlan_gpe_tunnel_t * |
| vxlan_gpe_tunnel_from_fib_node (fib_node_t * node) |
| { |
| ASSERT (FIB_NODE_TYPE_VXLAN_GPE_TUNNEL == node->fn_type); |
| return ((vxlan_gpe_tunnel_t *) (((char *) node) - |
| STRUCT_OFFSET_OF (vxlan_gpe_tunnel_t, |
| node))); |
| } |
| |
| /** |
| * Function definition to backwalk a FIB node - |
| * Here we will restack the new dpo of VXLAN_GPE DIP to encap node. |
| */ |
| static fib_node_back_walk_rc_t |
| vxlan_gpe_tunnel_back_walk (fib_node_t * node, fib_node_back_walk_ctx_t * ctx) |
| { |
| vxlan_gpe_tunnel_restack_dpo (vxlan_gpe_tunnel_from_fib_node (node)); |
| return (FIB_NODE_BACK_WALK_CONTINUE); |
| } |
| |
| /** |
| * Function definition to get a FIB node from its index |
| */ |
| static fib_node_t * |
| vxlan_gpe_tunnel_fib_node_get (fib_node_index_t index) |
| { |
| vxlan_gpe_tunnel_t *t; |
| vxlan_gpe_main_t *ngm = &vxlan_gpe_main; |
| |
| t = pool_elt_at_index (ngm->tunnels, index); |
| |
| return (&t->node); |
| } |
| |
| /** |
| * Function definition to inform the FIB node that its last lock has gone. |
| */ |
| static void |
| vxlan_gpe_tunnel_last_lock_gone (fib_node_t * node) |
| { |
| /* |
| * The VXLAN_GPE tunnel is a root of the graph. As such |
| * it never has children and thus is never locked. |
| */ |
| ASSERT (0); |
| } |
| |
| /* |
| * Virtual function table registered by VXLAN_GPE tunnels |
| * for participation in the FIB object graph. |
| */ |
| const static fib_node_vft_t vxlan_gpe_vft = { |
| .fnv_get = vxlan_gpe_tunnel_fib_node_get, |
| .fnv_last_lock = vxlan_gpe_tunnel_last_lock_gone, |
| .fnv_back_walk = vxlan_gpe_tunnel_back_walk, |
| }; |
| |
| #define foreach_gpe_copy_field \ |
| _(vni) \ |
| _(protocol) \ |
| _(mcast_sw_if_index) \ |
| _(encap_fib_index) \ |
| _(decap_fib_index) |
| |
| #define foreach_copy_ipv4 { \ |
| _(local.ip4.as_u32) \ |
| _(remote.ip4.as_u32) \ |
| } |
| |
| #define foreach_copy_ipv6 { \ |
| _(local.ip6.as_u64[0]) \ |
| _(local.ip6.as_u64[1]) \ |
| _(remote.ip6.as_u64[0]) \ |
| _(remote.ip6.as_u64[1]) \ |
| } |
| |
| |
| /** |
| * @brief Calculate IPv4 VXLAN GPE rewrite header |
| * |
| * @param *t |
| * |
| * @return rc |
| * |
| */ |
| int |
| vxlan4_gpe_rewrite (vxlan_gpe_tunnel_t * t, u32 extension_size, |
| u8 protocol_override, uword encap_next_node) |
| { |
| u8 *rw = 0; |
| ip4_header_t *ip0; |
| ip4_vxlan_gpe_header_t *h0; |
| int len; |
| |
| len = sizeof (*h0) + extension_size; |
| |
| vec_free (t->rewrite); |
| vec_validate_aligned (rw, len - 1, CLIB_CACHE_LINE_BYTES); |
| |
| h0 = (ip4_vxlan_gpe_header_t *) rw; |
| |
| /* Fixed portion of the (outer) ip4 header */ |
| ip0 = &h0->ip4; |
| ip0->ip_version_and_header_length = 0x45; |
| ip0->ttl = 254; |
| ip0->protocol = IP_PROTOCOL_UDP; |
| |
| /* we fix up the ip4 header length and checksum after-the-fact */ |
| ip0->src_address.as_u32 = t->local.ip4.as_u32; |
| ip0->dst_address.as_u32 = t->remote.ip4.as_u32; |
| ip0->checksum = ip4_header_checksum (ip0); |
| |
| /* UDP header, randomize src port on something, maybe? */ |
| h0->udp.src_port = clib_host_to_net_u16 (4790); |
| h0->udp.dst_port = clib_host_to_net_u16 (UDP_DST_PORT_VXLAN_GPE); |
| |
| /* VXLAN header. Are we having fun yet? */ |
| h0->vxlan.flags = VXLAN_GPE_FLAGS_I | VXLAN_GPE_FLAGS_P; |
| h0->vxlan.ver_res = VXLAN_GPE_VERSION; |
| if (protocol_override) |
| { |
| h0->vxlan.protocol = protocol_override; |
| } |
| else |
| { |
| h0->vxlan.protocol = t->protocol; |
| } |
| t->rewrite_size = sizeof (ip4_vxlan_gpe_header_t) + extension_size; |
| h0->vxlan.vni_res = clib_host_to_net_u32 (t->vni << 8); |
| |
| t->rewrite = rw; |
| t->encap_next_node = encap_next_node; |
| return (0); |
| } |
| |
| /** |
| * @brief Calculate IPv6 VXLAN GPE rewrite header |
| * |
| * @param *t |
| * |
| * @return rc |
| * |
| */ |
| int |
| vxlan6_gpe_rewrite (vxlan_gpe_tunnel_t * t, u32 extension_size, |
| u8 protocol_override, uword encap_next_node) |
| { |
| u8 *rw = 0; |
| ip6_header_t *ip0; |
| ip6_vxlan_gpe_header_t *h0; |
| int len; |
| |
| len = sizeof (*h0) + extension_size; |
| |
| vec_free (t->rewrite); |
| vec_validate_aligned (rw, len - 1, CLIB_CACHE_LINE_BYTES); |
| |
| h0 = (ip6_vxlan_gpe_header_t *) rw; |
| |
| /* Fixed portion of the (outer) ip4 header */ |
| ip0 = &h0->ip6; |
| ip0->ip_version_traffic_class_and_flow_label = |
| clib_host_to_net_u32 (6 << 28); |
| ip0->hop_limit = 255; |
| ip0->protocol = IP_PROTOCOL_UDP; |
| |
| ip0->src_address.as_u64[0] = t->local.ip6.as_u64[0]; |
| ip0->src_address.as_u64[1] = t->local.ip6.as_u64[1]; |
| ip0->dst_address.as_u64[0] = t->remote.ip6.as_u64[0]; |
| ip0->dst_address.as_u64[1] = t->remote.ip6.as_u64[1]; |
| |
| /* UDP header, randomize src port on something, maybe? */ |
| h0->udp.src_port = clib_host_to_net_u16 (4790); |
| h0->udp.dst_port = clib_host_to_net_u16 (UDP_DST_PORT_VXLAN_GPE); |
| |
| /* VXLAN header. Are we having fun yet? */ |
| h0->vxlan.flags = VXLAN_GPE_FLAGS_I | VXLAN_GPE_FLAGS_P; |
| h0->vxlan.ver_res = VXLAN_GPE_VERSION; |
| if (protocol_override) |
| { |
| h0->vxlan.protocol = t->protocol; |
| } |
| else |
| { |
| h0->vxlan.protocol = protocol_override; |
| } |
| t->rewrite_size = sizeof (ip4_vxlan_gpe_header_t) + extension_size; |
| h0->vxlan.vni_res = clib_host_to_net_u32 (t->vni << 8); |
| |
| t->rewrite = rw; |
| t->encap_next_node = encap_next_node; |
| return (0); |
| } |
| |
| static uword |
| vtep_addr_ref (ip46_address_t * ip) |
| { |
| uword *vtep = ip46_address_is_ip4 (ip) ? |
| hash_get (vxlan_gpe_main.vtep4, ip->ip4.as_u32) : |
| hash_get_mem (vxlan_gpe_main.vtep6, &ip->ip6); |
| if (vtep) |
| return ++(*vtep); |
| ip46_address_is_ip4 (ip) ? |
| hash_set (vxlan_gpe_main.vtep4, ip->ip4.as_u32, 1) : |
| hash_set_mem_alloc (&vxlan_gpe_main.vtep6, &ip->ip6, 1); |
| return 1; |
| } |
| |
| static uword |
| vtep_addr_unref (ip46_address_t * ip) |
| { |
| uword *vtep = ip46_address_is_ip4 (ip) ? |
| hash_get (vxlan_gpe_main.vtep4, ip->ip4.as_u32) : |
| hash_get_mem (vxlan_gpe_main.vtep6, &ip->ip6); |
| ALWAYS_ASSERT (vtep); |
| if (--(*vtep) != 0) |
| return *vtep; |
| ip46_address_is_ip4 (ip) ? |
| hash_unset (vxlan_gpe_main.vtep4, ip->ip4.as_u32) : |
| hash_unset_mem_free (&vxlan_gpe_main.vtep6, &ip->ip6); |
| return 0; |
| } |
| |
| /* *INDENT-OFF* */ |
| typedef CLIB_PACKED(union { |
| struct { |
| fib_node_index_t mfib_entry_index; |
| adj_index_t mcast_adj_index; |
| }; |
| u64 as_u64; |
| }) mcast_shared_t; |
| /* *INDENT-ON* */ |
| |
| static inline mcast_shared_t |
| mcast_shared_get (ip46_address_t * ip) |
| { |
| ASSERT (ip46_address_is_multicast (ip)); |
| uword *p = hash_get_mem (vxlan_gpe_main.mcast_shared, ip); |
| ASSERT (p); |
| return (mcast_shared_t) |
| { |
| .as_u64 = *p}; |
| } |
| |
| static inline void |
| mcast_shared_add (ip46_address_t * remote, |
| fib_node_index_t mfei, adj_index_t ai) |
| { |
| mcast_shared_t new_ep = { |
| .mcast_adj_index = ai, |
| .mfib_entry_index = mfei, |
| }; |
| |
| hash_set_mem_alloc (&vxlan_gpe_main.mcast_shared, remote, new_ep.as_u64); |
| } |
| |
| static inline void |
| mcast_shared_remove (ip46_address_t * remote) |
| { |
| mcast_shared_t ep = mcast_shared_get (remote); |
| |
| adj_unlock (ep.mcast_adj_index); |
| mfib_table_entry_delete_index (ep.mfib_entry_index, MFIB_SOURCE_VXLAN_GPE); |
| |
| hash_unset_mem_free (&vxlan_gpe_main.mcast_shared, remote); |
| } |
| |
| /** |
| * @brief Add or Del a VXLAN GPE tunnel |
| * |
| * @param *a |
| * @param *sw_if_index |
| * |
| * @return rc |
| * |
| */ |
| int vnet_vxlan_gpe_add_del_tunnel |
| (vnet_vxlan_gpe_add_del_tunnel_args_t * a, u32 * sw_if_indexp) |
| { |
| vxlan_gpe_main_t *ngm = &vxlan_gpe_main; |
| vxlan_gpe_tunnel_t *t = 0; |
| vnet_main_t *vnm = ngm->vnet_main; |
| vnet_hw_interface_t *hi; |
| uword *p; |
| u32 hw_if_index = ~0; |
| u32 sw_if_index = ~0; |
| int rv; |
| vxlan4_gpe_tunnel_key_t key4, *key4_copy; |
| vxlan6_gpe_tunnel_key_t key6, *key6_copy; |
| u32 is_ip6 = a->is_ip6; |
| |
| if (!is_ip6) |
| { |
| key4.local = a->local.ip4.as_u32; |
| key4.remote = a->remote.ip4.as_u32; |
| key4.vni = clib_host_to_net_u32 (a->vni << 8); |
| key4.pad = 0; |
| |
| p = hash_get_mem (ngm->vxlan4_gpe_tunnel_by_key, &key4); |
| } |
| else |
| { |
| key6.local.as_u64[0] = a->local.ip6.as_u64[0]; |
| key6.local.as_u64[1] = a->local.ip6.as_u64[1]; |
| key6.remote.as_u64[0] = a->remote.ip6.as_u64[0]; |
| key6.remote.as_u64[1] = a->remote.ip6.as_u64[1]; |
| key6.vni = clib_host_to_net_u32 (a->vni << 8); |
| |
| p = hash_get_mem (ngm->vxlan6_gpe_tunnel_by_key, &key6); |
| } |
| |
| if (a->is_add) |
| { |
| l2input_main_t *l2im = &l2input_main; |
| |
| /* adding a tunnel: tunnel must not already exist */ |
| if (p) |
| return VNET_API_ERROR_TUNNEL_EXIST; |
| |
| pool_get_aligned (ngm->tunnels, t, CLIB_CACHE_LINE_BYTES); |
| clib_memset (t, 0, sizeof (*t)); |
| |
| /* copy from arg structure */ |
| /* *INDENT-OFF* */ |
| #define _(x) t->x = a->x; |
| foreach_gpe_copy_field; |
| if (!a->is_ip6) |
| foreach_copy_ipv4 |
| else |
| foreach_copy_ipv6 |
| #undef _ |
| /* *INDENT-ON* */ |
| |
| if (!a->is_ip6) |
| t->flags |= VXLAN_GPE_TUNNEL_IS_IPV4; |
| |
| if (!a->is_ip6) |
| { |
| rv = vxlan4_gpe_rewrite (t, 0, 0, VXLAN_GPE_ENCAP_NEXT_IP4_LOOKUP); |
| } |
| else |
| { |
| rv = vxlan6_gpe_rewrite (t, 0, 0, VXLAN_GPE_ENCAP_NEXT_IP6_LOOKUP); |
| } |
| |
| if (rv) |
| { |
| pool_put (ngm->tunnels, t); |
| return rv; |
| } |
| |
| if (!is_ip6) |
| { |
| key4_copy = clib_mem_alloc (sizeof (*key4_copy)); |
| clib_memcpy_fast (key4_copy, &key4, sizeof (*key4_copy)); |
| hash_set_mem (ngm->vxlan4_gpe_tunnel_by_key, key4_copy, |
| t - ngm->tunnels); |
| } |
| else |
| { |
| key6_copy = clib_mem_alloc (sizeof (*key6_copy)); |
| clib_memcpy_fast (key6_copy, &key6, sizeof (*key6_copy)); |
| hash_set_mem (ngm->vxlan6_gpe_tunnel_by_key, key6_copy, |
| t - ngm->tunnels); |
| } |
| |
| if (vec_len (ngm->free_vxlan_gpe_tunnel_hw_if_indices) > 0) |
| { |
| vnet_interface_main_t *im = &vnm->interface_main; |
| hw_if_index = ngm->free_vxlan_gpe_tunnel_hw_if_indices |
| [vec_len (ngm->free_vxlan_gpe_tunnel_hw_if_indices) - 1]; |
| _vec_len (ngm->free_vxlan_gpe_tunnel_hw_if_indices) -= 1; |
| |
| hi = vnet_get_hw_interface (vnm, hw_if_index); |
| hi->dev_instance = t - ngm->tunnels; |
| hi->hw_instance = hi->dev_instance; |
| /* clear old stats of freed tunnel before reuse */ |
| sw_if_index = hi->sw_if_index; |
| vnet_interface_counter_lock (im); |
| vlib_zero_combined_counter |
| (&im->combined_sw_if_counters[VNET_INTERFACE_COUNTER_TX], |
| sw_if_index); |
| vlib_zero_combined_counter (&im->combined_sw_if_counters |
| [VNET_INTERFACE_COUNTER_RX], |
| sw_if_index); |
| vlib_zero_simple_counter (&im->sw_if_counters |
| [VNET_INTERFACE_COUNTER_DROP], |
| sw_if_index); |
| vnet_interface_counter_unlock (im); |
| } |
| else |
| { |
| hw_if_index = vnet_register_interface |
| (vnm, vxlan_gpe_device_class.index, t - ngm->tunnels, |
| vxlan_gpe_hw_class.index, t - ngm->tunnels); |
| hi = vnet_get_hw_interface (vnm, hw_if_index); |
| } |
| |
| /* Set vxlan-gpe tunnel output node */ |
| u32 encap_index = vxlan_gpe_encap_node.index; |
| vnet_set_interface_output_node (vnm, hw_if_index, encap_index); |
| |
| t->hw_if_index = hw_if_index; |
| t->sw_if_index = sw_if_index = hi->sw_if_index; |
| vec_validate_init_empty (ngm->tunnel_index_by_sw_if_index, sw_if_index, |
| ~0); |
| ngm->tunnel_index_by_sw_if_index[sw_if_index] = t - ngm->tunnels; |
| |
| /* setup l2 input config with l2 feature and bd 0 to drop packet */ |
| vec_validate (l2im->configs, sw_if_index); |
| l2im->configs[sw_if_index].feature_bitmap = L2INPUT_FEAT_DROP; |
| l2im->configs[sw_if_index].bd_index = 0; |
| |
| vnet_sw_interface_t *si = vnet_get_sw_interface (vnm, sw_if_index); |
| si->flags &= ~VNET_SW_INTERFACE_FLAG_HIDDEN; |
| vnet_sw_interface_set_flags (vnm, hi->sw_if_index, |
| VNET_SW_INTERFACE_FLAG_ADMIN_UP); |
| fib_node_init (&t->node, FIB_NODE_TYPE_VXLAN_GPE_TUNNEL); |
| fib_prefix_t tun_remote_pfx; |
| vnet_flood_class_t flood_class = VNET_FLOOD_CLASS_TUNNEL_NORMAL; |
| |
| fib_prefix_from_ip46_addr (&t->remote, &tun_remote_pfx); |
| if (!ip46_address_is_multicast (&t->remote)) |
| { |
| /* Unicast tunnel - |
| * source the FIB entry for the tunnel's destination |
| * and become a child thereof. The tunnel will then get poked |
| * when the forwarding for the entry updates, and the tunnel can |
| * re-stack accordingly |
| */ |
| vtep_addr_ref (&t->local); |
| t->fib_entry_index = fib_entry_track (t->encap_fib_index, |
| &tun_remote_pfx, |
| FIB_NODE_TYPE_VXLAN_GPE_TUNNEL, |
| t - ngm->tunnels, |
| &t->sibling_index); |
| vxlan_gpe_tunnel_restack_dpo (t); |
| } |
| else |
| { |
| /* Multicast tunnel - |
| * as the same mcast group can be used for multiple mcast tunnels |
| * with different VNIs, create the output fib adjacency only if |
| * it does not already exist |
| */ |
| fib_protocol_t fp = fib_ip_proto (is_ip6); |
| |
| if (vtep_addr_ref (&t->remote) == 1) |
| { |
| fib_node_index_t mfei; |
| adj_index_t ai; |
| fib_route_path_t path = { |
| .frp_proto = fib_proto_to_dpo (fp), |
| .frp_addr = zero_addr, |
| .frp_sw_if_index = 0xffffffff, |
| .frp_fib_index = ~0, |
| .frp_weight = 1, |
| .frp_flags = FIB_ROUTE_PATH_LOCAL, |
| .frp_mitf_flags = MFIB_ITF_FLAG_FORWARD, |
| }; |
| const mfib_prefix_t mpfx = { |
| .fp_proto = fp, |
| .fp_len = (is_ip6 ? 128 : 32), |
| .fp_grp_addr = tun_remote_pfx.fp_addr, |
| }; |
| |
| /* |
| * Setup the (*,G) to receive traffic on the mcast group |
| * - the forwarding interface is for-us |
| * - the accepting interface is that from the API |
| */ |
| mfib_table_entry_path_update (t->encap_fib_index, |
| &mpfx, |
| MFIB_SOURCE_VXLAN_GPE, &path); |
| |
| path.frp_sw_if_index = a->mcast_sw_if_index; |
| path.frp_flags = FIB_ROUTE_PATH_FLAG_NONE; |
| path.frp_mitf_flags = MFIB_ITF_FLAG_ACCEPT; |
| mfei = mfib_table_entry_path_update (t->encap_fib_index, |
| &mpfx, |
| MFIB_SOURCE_VXLAN_GPE, |
| &path); |
| |
| /* |
| * Create the mcast adjacency to send traffic to the group |
| */ |
| ai = adj_mcast_add_or_lock (fp, |
| fib_proto_to_link (fp), |
| a->mcast_sw_if_index); |
| |
| /* |
| * create a new end-point |
| */ |
| mcast_shared_add (&t->remote, mfei, ai); |
| } |
| |
| dpo_id_t dpo = DPO_INVALID; |
| mcast_shared_t ep = mcast_shared_get (&t->remote); |
| |
| /* Stack shared mcast remote mac addr rewrite on encap */ |
| dpo_set (&dpo, DPO_ADJACENCY_MCAST, |
| fib_proto_to_dpo (fp), ep.mcast_adj_index); |
| |
| dpo_stack_from_node (encap_index, &t->next_dpo, &dpo); |
| dpo_reset (&dpo); |
| flood_class = VNET_FLOOD_CLASS_TUNNEL_MASTER; |
| } |
| |
| vnet_get_sw_interface (vnet_get_main (), sw_if_index)->flood_class = |
| flood_class; |
| } |
| else |
| { |
| /* deleting a tunnel: tunnel must exist */ |
| if (!p) |
| return VNET_API_ERROR_NO_SUCH_ENTRY; |
| |
| t = pool_elt_at_index (ngm->tunnels, p[0]); |
| |
| sw_if_index = t->sw_if_index; |
| vnet_sw_interface_set_flags (vnm, t->sw_if_index, 0 /* down */ ); |
| vnet_sw_interface_t *si = vnet_get_sw_interface (vnm, t->sw_if_index); |
| si->flags |= VNET_SW_INTERFACE_FLAG_HIDDEN; |
| set_int_l2_mode (ngm->vlib_main, vnm, MODE_L3, t->sw_if_index, 0, |
| L2_BD_PORT_TYPE_NORMAL, 0, 0); |
| vec_add1 (ngm->free_vxlan_gpe_tunnel_hw_if_indices, t->hw_if_index); |
| |
| ngm->tunnel_index_by_sw_if_index[t->sw_if_index] = ~0; |
| |
| if (!is_ip6) |
| hash_unset (ngm->vxlan4_gpe_tunnel_by_key, key4.as_u64); |
| else |
| hash_unset_mem_free (&ngm->vxlan6_gpe_tunnel_by_key, &key6); |
| |
| if (!ip46_address_is_multicast (&t->remote)) |
| { |
| vtep_addr_unref (&t->local); |
| fib_entry_untrack (t->fib_entry_index, t->sibling_index); |
| } |
| else if (vtep_addr_unref (&t->remote) == 0) |
| { |
| mcast_shared_remove (&t->remote); |
| } |
| |
| fib_node_deinit (&t->node); |
| vec_free (t->rewrite); |
| pool_put (ngm->tunnels, t); |
| } |
| |
| if (sw_if_indexp) |
| *sw_if_indexp = sw_if_index; |
| |
| if (a->is_add) |
| { |
| /* register udp ports */ |
| if (!is_ip6 && !udp_is_valid_dst_port (UDP_DST_PORT_VXLAN_GPE, 1)) |
| udp_register_dst_port (ngm->vlib_main, UDP_DST_PORT_VXLAN_GPE, |
| vxlan4_gpe_input_node.index, 1 /* is_ip4 */ ); |
| if (is_ip6 && !udp_is_valid_dst_port (UDP_DST_PORT_VXLAN6_GPE, 0)) |
| udp_register_dst_port (ngm->vlib_main, UDP_DST_PORT_VXLAN6_GPE, |
| vxlan6_gpe_input_node.index, 0 /* is_ip4 */ ); |
| } |
| |
| return 0; |
| } |
| |
| static clib_error_t * |
| vxlan_gpe_add_del_tunnel_command_fn (vlib_main_t * vm, |
| unformat_input_t * input, |
| vlib_cli_command_t * cmd) |
| { |
| unformat_input_t _line_input, *line_input = &_line_input; |
| u8 is_add = 1; |
| ip46_address_t local, remote; |
| u8 local_set = 0; |
| u8 remote_set = 0; |
| u8 grp_set = 0; |
| u8 ipv4_set = 0; |
| u8 ipv6_set = 0; |
| u32 mcast_sw_if_index = ~0; |
| u32 encap_fib_index = 0; |
| u32 decap_fib_index = 0; |
| u8 protocol = VXLAN_GPE_PROTOCOL_IP4; |
| u32 vni; |
| u8 vni_set = 0; |
| int rv; |
| u32 tmp; |
| vnet_vxlan_gpe_add_del_tunnel_args_t _a, *a = &_a; |
| u32 sw_if_index; |
| clib_error_t *error = NULL; |
| |
| /* Get a line of input. */ |
| if (!unformat_user (input, unformat_line_input, line_input)) |
| return 0; |
| |
| while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) |
| { |
| if (unformat (line_input, "del")) |
| is_add = 0; |
| else if (unformat (line_input, "local %U", |
| unformat_ip4_address, &local.ip4)) |
| { |
| local_set = 1; |
| ipv4_set = 1; |
| } |
| else if (unformat (line_input, "remote %U", |
| unformat_ip4_address, &remote.ip4)) |
| { |
| remote_set = 1; |
| ipv4_set = 1; |
| } |
| else if (unformat (line_input, "local %U", |
| unformat_ip6_address, &local.ip6)) |
| { |
| local_set = 1; |
| ipv6_set = 1; |
| } |
| else if (unformat (line_input, "remote %U", |
| unformat_ip6_address, &remote.ip6)) |
| { |
| remote_set = 1; |
| ipv6_set = 1; |
| } |
| else if (unformat (line_input, "group %U %U", |
| unformat_ip4_address, &remote.ip4, |
| unformat_vnet_sw_interface, |
| vnet_get_main (), &mcast_sw_if_index)) |
| { |
| grp_set = remote_set = 1; |
| ipv4_set = 1; |
| } |
| else if (unformat (line_input, "group %U %U", |
| unformat_ip6_address, &remote.ip6, |
| unformat_vnet_sw_interface, |
| vnet_get_main (), &mcast_sw_if_index)) |
| { |
| grp_set = remote_set = 1; |
| ipv6_set = 1; |
| } |
| else if (unformat (line_input, "encap-vrf-id %d", &tmp)) |
| { |
| if (ipv6_set) |
| encap_fib_index = fib_table_find (FIB_PROTOCOL_IP6, tmp); |
| else |
| encap_fib_index = fib_table_find (FIB_PROTOCOL_IP4, tmp); |
| |
| if (encap_fib_index == ~0) |
| { |
| error = |
| clib_error_return (0, "nonexistent encap fib id %d", tmp); |
| goto done; |
| } |
| } |
| else if (unformat (line_input, "decap-vrf-id %d", &tmp)) |
| { |
| if (ipv6_set) |
| decap_fib_index = fib_table_find (FIB_PROTOCOL_IP6, tmp); |
| else |
| decap_fib_index = fib_table_find (FIB_PROTOCOL_IP4, tmp); |
| |
| if (decap_fib_index == ~0) |
| { |
| error = |
| clib_error_return (0, "nonexistent decap fib id %d", tmp); |
| goto done; |
| } |
| } |
| else if (unformat (line_input, "vni %d", &vni)) |
| vni_set = 1; |
| else if (unformat (line_input, "next-ip4")) |
| protocol = VXLAN_GPE_PROTOCOL_IP4; |
| else if (unformat (line_input, "next-ip6")) |
| protocol = VXLAN_GPE_PROTOCOL_IP6; |
| else if (unformat (line_input, "next-ethernet")) |
| protocol = VXLAN_GPE_PROTOCOL_ETHERNET; |
| else if (unformat (line_input, "next-nsh")) |
| protocol = VXLAN_GPE_PROTOCOL_NSH; |
| else |
| { |
| error = clib_error_return (0, "parse error: '%U'", |
| format_unformat_error, line_input); |
| goto done; |
| } |
| } |
| |
| if (local_set == 0) |
| { |
| error = clib_error_return (0, "tunnel local address not specified"); |
| goto done; |
| } |
| |
| if (remote_set == 0) |
| { |
| error = clib_error_return (0, "tunnel remote address not specified"); |
| goto done; |
| } |
| |
| if (grp_set && !ip46_address_is_multicast (&remote)) |
| { |
| error = clib_error_return (0, "tunnel group address not multicast"); |
| goto done; |
| } |
| |
| if (grp_set == 0 && ip46_address_is_multicast (&remote)) |
| { |
| error = clib_error_return (0, "remote address must be unicast"); |
| goto done; |
| } |
| |
| if (grp_set && mcast_sw_if_index == ~0) |
| { |
| error = clib_error_return (0, "tunnel nonexistent multicast device"); |
| goto done; |
| } |
| if (ipv4_set && ipv6_set) |
| { |
| error = clib_error_return (0, "both IPv4 and IPv6 addresses specified"); |
| goto done; |
| } |
| |
| if ((ipv4_set && memcmp (&local.ip4, &remote.ip4, sizeof (local.ip4)) == 0) |
| || (ipv6_set |
| && memcmp (&local.ip6, &remote.ip6, sizeof (local.ip6)) == 0)) |
| { |
| error = clib_error_return (0, "src and remote addresses are identical"); |
| goto done; |
| } |
| |
| if (vni_set == 0) |
| { |
| error = clib_error_return (0, "vni not specified"); |
| goto done; |
| } |
| |
| clib_memset (a, 0, sizeof (*a)); |
| |
| a->is_add = is_add; |
| a->is_ip6 = ipv6_set; |
| |
| /* *INDENT-OFF* */ |
| #define _(x) a->x = x; |
| foreach_gpe_copy_field; |
| if (ipv4_set) |
| foreach_copy_ipv4 |
| else |
| foreach_copy_ipv6 |
| #undef _ |
| /* *INDENT-ON* */ |
| |
| rv = vnet_vxlan_gpe_add_del_tunnel (a, &sw_if_index); |
| |
| switch (rv) |
| { |
| case 0: |
| vlib_cli_output (vm, "%U\n", format_vnet_sw_if_index_name, |
| vnet_get_main (), sw_if_index); |
| break; |
| case VNET_API_ERROR_INVALID_DECAP_NEXT: |
| error = clib_error_return (0, "invalid decap-next..."); |
| goto done; |
| |
| case VNET_API_ERROR_TUNNEL_EXIST: |
| error = clib_error_return (0, "tunnel already exists..."); |
| goto done; |
| |
| case VNET_API_ERROR_NO_SUCH_ENTRY: |
| error = clib_error_return (0, "tunnel does not exist..."); |
| goto done; |
| |
| default: |
| error = clib_error_return |
| (0, "vnet_vxlan_gpe_add_del_tunnel returned %d", rv); |
| goto done; |
| } |
| |
| done: |
| unformat_free (line_input); |
| |
| return error; |
| } |
| |
| /*? |
| * Add or delete a VXLAN-GPE Tunnel. |
| * |
| * VXLAN-GPE provides the features needed to allow L2 bridge domains (BDs) |
| * to span multiple servers. This is done by building an L2 overlay on |
| * top of an L3 network underlay using VXLAN-GPE tunnels. |
| * |
| * This makes it possible for servers to be co-located in the same data |
| * center or be separated geographically as long as they are reachable |
| * through the underlay L3 network. |
| * |
| * You can refer to this kind of L2 overlay bridge domain as a VXLAN-GPE segment. |
| * |
| * @cliexpar |
| * Example of how to create a VXLAN-GPE Tunnel: |
| * @cliexcmd{create vxlan-gpe tunnel local 10.0.3.1 remote 10.0.3.3 vni 13 encap-vrf-id 7} |
| * Example of how to delete a VXLAN-GPE Tunnel: |
| * @cliexcmd{create vxlan-gpe tunnel local 10.0.3.1 remote 10.0.3.3 vni 13 del} |
| ?*/ |
| /* *INDENT-OFF* */ |
| VLIB_CLI_COMMAND (create_vxlan_gpe_tunnel_command, static) = { |
| .path = "create vxlan-gpe tunnel", |
| .short_help = |
| "create vxlan-gpe tunnel local <local-addr> " |
| " {remote <remote-addr>|group <mcast-addr> <intf-name>}" |
| " vni <nn> [next-ip4][next-ip6][next-ethernet][next-nsh]" |
| " [encap-vrf-id <nn>] [decap-vrf-id <nn>] [del]\n", |
| .function = vxlan_gpe_add_del_tunnel_command_fn, |
| }; |
| /* *INDENT-ON* */ |
| |
| /** |
| * @brief CLI function for showing VXLAN GPE tunnels |
| * |
| * @param *vm |
| * @param *input |
| * @param *cmd |
| * |
| * @return error |
| * |
| */ |
| static clib_error_t * |
| show_vxlan_gpe_tunnel_command_fn (vlib_main_t * vm, |
| unformat_input_t * input, |
| vlib_cli_command_t * cmd) |
| { |
| vxlan_gpe_main_t *ngm = &vxlan_gpe_main; |
| vxlan_gpe_tunnel_t *t; |
| |
| if (pool_elts (ngm->tunnels) == 0) |
| vlib_cli_output (vm, "No vxlan-gpe tunnels configured."); |
| |
| /* *INDENT-OFF* */ |
| pool_foreach (t, ngm->tunnels, |
| ({ |
| vlib_cli_output (vm, "%U", format_vxlan_gpe_tunnel, t); |
| })); |
| /* *INDENT-ON* */ |
| |
| return 0; |
| } |
| |
| /*? |
| * Display all the VXLAN-GPE Tunnel entries. |
| * |
| * @cliexpar |
| * Example of how to display the VXLAN-GPE Tunnel entries: |
| * @cliexstart{show vxlan-gpe tunnel} |
| * [0] local 10.0.3.1 remote 10.0.3.3 vni 13 encap_fib_index 0 sw_if_index 5 decap_next l2 |
| * @cliexend |
| ?*/ |
| /* *INDENT-OFF* */ |
| VLIB_CLI_COMMAND (show_vxlan_gpe_tunnel_command, static) = { |
| .path = "show vxlan-gpe", |
| .function = show_vxlan_gpe_tunnel_command_fn, |
| }; |
| /* *INDENT-ON* */ |
| |
| void |
| vnet_int_vxlan_gpe_bypass_mode (u32 sw_if_index, u8 is_ip6, u8 is_enable) |
| { |
| if (is_ip6) |
| vnet_feature_enable_disable ("ip6-unicast", "ip6-vxlan-gpe-bypass", |
| sw_if_index, is_enable, 0, 0); |
| else |
| vnet_feature_enable_disable ("ip4-unicast", "ip4-vxlan-gpe-bypass", |
| sw_if_index, is_enable, 0, 0); |
| } |
| |
| |
| static clib_error_t * |
| set_ip_vxlan_gpe_bypass (u32 is_ip6, |
| unformat_input_t * input, vlib_cli_command_t * cmd) |
| { |
| unformat_input_t _line_input, *line_input = &_line_input; |
| vnet_main_t *vnm = vnet_get_main (); |
| clib_error_t *error = 0; |
| u32 sw_if_index, is_enable; |
| |
| sw_if_index = ~0; |
| is_enable = 1; |
| |
| if (!unformat_user (input, unformat_line_input, line_input)) |
| return 0; |
| |
| while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) |
| { |
| if (unformat_user |
| (line_input, unformat_vnet_sw_interface, vnm, &sw_if_index)) |
| ; |
| else if (unformat (line_input, "del")) |
| is_enable = 0; |
| else |
| { |
| error = unformat_parse_error (line_input); |
| goto done; |
| } |
| } |
| |
| if (~0 == sw_if_index) |
| { |
| error = clib_error_return (0, "unknown interface `%U'", |
| format_unformat_error, line_input); |
| goto done; |
| } |
| |
| vnet_int_vxlan_gpe_bypass_mode (sw_if_index, is_ip6, is_enable); |
| |
| done: |
| unformat_free (line_input); |
| |
| return error; |
| } |
| |
| static clib_error_t * |
| set_ip4_vxlan_gpe_bypass (vlib_main_t * vm, |
| unformat_input_t * input, vlib_cli_command_t * cmd) |
| { |
| return set_ip_vxlan_gpe_bypass (0, input, cmd); |
| } |
| |
| /*? |
| * This command adds the 'ip4-vxlan-gpe-bypass' graph node for a given interface. |
| * By adding the IPv4 vxlan-gpe-bypass graph node to an interface, the node checks |
| * for and validate input vxlan_gpe packet and bypass ip4-lookup, ip4-local, |
| * ip4-udp-lookup nodes to speedup vxlan_gpe packet forwarding. This node will |
| * cause extra overhead to for non-vxlan_gpe packets which is kept at a minimum. |
| * |
| * @cliexpar |
| * @parblock |
| * Example of graph node before ip4-vxlan-gpe-bypass is enabled: |
| * @cliexstart{show vlib graph ip4-vxlan-gpe-bypass} |
| * Name Next Previous |
| * ip4-vxlan-gpe-bypass error-drop [0] |
| * vxlan4-gpe-input [1] |
| * ip4-lookup [2] |
| * @cliexend |
| * |
| * Example of how to enable ip4-vxlan-gpe-bypass on an interface: |
| * @cliexcmd{set interface ip vxlan-gpe-bypass GigabitEthernet2/0/0} |
| * |
| * Example of graph node after ip4-vxlan-gpe-bypass is enabled: |
| * @cliexstart{show vlib graph ip4-vxlan-gpe-bypass} |
| * Name Next Previous |
| * ip4-vxlan-gpe-bypass error-drop [0] ip4-input |
| * vxlan4-gpe-input [1] ip4-input-no-checksum |
| * ip4-lookup [2] |
| * @cliexend |
| * |
| * Example of how to display the feature enabled on an interface: |
| * @cliexstart{show ip interface features GigabitEthernet2/0/0} |
| * IP feature paths configured on GigabitEthernet2/0/0... |
| * ... |
| * ipv4 unicast: |
| * ip4-vxlan-gpe-bypass |
| * ip4-lookup |
| * ... |
| * @cliexend |
| * |
| * Example of how to disable ip4-vxlan-gpe-bypass on an interface: |
| * @cliexcmd{set interface ip vxlan-gpe-bypass GigabitEthernet2/0/0 del} |
| * @endparblock |
| ?*/ |
| /* *INDENT-OFF* */ |
| VLIB_CLI_COMMAND (set_interface_ip_vxlan_gpe_bypass_command, static) = { |
| .path = "set interface ip vxlan-gpe-bypass", |
| .function = set_ip4_vxlan_gpe_bypass, |
| .short_help = "set interface ip vxlan-gpe-bypass <interface> [del]", |
| }; |
| /* *INDENT-ON* */ |
| |
| static clib_error_t * |
| set_ip6_vxlan_gpe_bypass (vlib_main_t * vm, |
| unformat_input_t * input, vlib_cli_command_t * cmd) |
| { |
| return set_ip_vxlan_gpe_bypass (1, input, cmd); |
| } |
| |
| /*? |
| * This command adds the 'ip6-vxlan-gpe-bypass' graph node for a given interface. |
| * By adding the IPv6 vxlan-gpe-bypass graph node to an interface, the node checks |
| * for and validate input vxlan_gpe packet and bypass ip6-lookup, ip6-local, |
| * ip6-udp-lookup nodes to speedup vxlan_gpe packet forwarding. This node will |
| * cause extra overhead to for non-vxlan_gpe packets which is kept at a minimum. |
| * |
| * @cliexpar |
| * @parblock |
| * Example of graph node before ip6-vxlan-gpe-bypass is enabled: |
| * @cliexstart{show vlib graph ip6-vxlan-gpe-bypass} |
| * Name Next Previous |
| * ip6-vxlan-gpe-bypass error-drop [0] |
| * vxlan6-gpe-input [1] |
| * ip6-lookup [2] |
| * @cliexend |
| * |
| * Example of how to enable ip6-vxlan-gpe-bypass on an interface: |
| * @cliexcmd{set interface ip6 vxlan-gpe-bypass GigabitEthernet2/0/0} |
| * |
| * Example of graph node after ip6-vxlan-gpe-bypass is enabled: |
| * @cliexstart{show vlib graph ip6-vxlan-gpe-bypass} |
| * Name Next Previous |
| * ip6-vxlan-gpe-bypass error-drop [0] ip6-input |
| * vxlan6-gpe-input [1] ip4-input-no-checksum |
| * ip6-lookup [2] |
| * @cliexend |
| * |
| * Example of how to display the feature enabled on an interface: |
| * @cliexstart{show ip interface features GigabitEthernet2/0/0} |
| * IP feature paths configured on GigabitEthernet2/0/0... |
| * ... |
| * ipv6 unicast: |
| * ip6-vxlan-gpe-bypass |
| * ip6-lookup |
| * ... |
| * @cliexend |
| * |
| * Example of how to disable ip6-vxlan-gpe-bypass on an interface: |
| * @cliexcmd{set interface ip6 vxlan-gpe-bypass GigabitEthernet2/0/0 del} |
| * @endparblock |
| ?*/ |
| /* *INDENT-OFF* */ |
| VLIB_CLI_COMMAND (set_interface_ip6_vxlan_gpe_bypass_command, static) = { |
| .path = "set interface ip6 vxlan-gpe-bypass", |
| .function = set_ip6_vxlan_gpe_bypass, |
| .short_help = "set interface ip6 vxlan-gpe-bypass <interface> [del]", |
| }; |
| /* *INDENT-ON* */ |
| |
| /* *INDENT-OFF* */ |
| VNET_FEATURE_INIT (ip4_vxlan_gpe_bypass, static) = |
| { |
| .arc_name = "ip4-unicast", |
| .node_name = "ip4-vxlan-gpe-bypass", |
| .runs_before = VNET_FEATURES ("ip4-lookup"), |
| }; |
| |
| VNET_FEATURE_INIT (ip6_vxlan_gpe_bypass, static) = |
| { |
| .arc_name = "ip6-unicast", |
| .node_name = "ip6-vxlan-gpe-bypass", |
| .runs_before = VNET_FEATURES ("ip6-lookup"), |
| }; |
| /* *INDENT-ON* */ |
| |
| /** |
| * @brief Feature init function for VXLAN GPE |
| * |
| * @param *vm |
| * |
| * @return error |
| * |
| */ |
| clib_error_t * |
| vxlan_gpe_init (vlib_main_t * vm) |
| { |
| vxlan_gpe_main_t *ngm = &vxlan_gpe_main; |
| |
| ngm->vnet_main = vnet_get_main (); |
| ngm->vlib_main = vm; |
| |
| ngm->vxlan4_gpe_tunnel_by_key |
| = hash_create_mem (0, sizeof (vxlan4_gpe_tunnel_key_t), sizeof (uword)); |
| |
| ngm->vxlan6_gpe_tunnel_by_key |
| = hash_create_mem (0, sizeof (vxlan6_gpe_tunnel_key_t), sizeof (uword)); |
| |
| |
| ngm->mcast_shared = hash_create_mem (0, |
| sizeof (ip46_address_t), |
| sizeof (mcast_shared_t)); |
| ngm->vtep6 = hash_create_mem (0, sizeof (ip6_address_t), sizeof (uword)); |
| |
| /* Register the list of standard decap protocols supported */ |
| vxlan_gpe_register_decap_protocol (VXLAN_GPE_PROTOCOL_IP4, |
| VXLAN_GPE_INPUT_NEXT_IP4_INPUT); |
| vxlan_gpe_register_decap_protocol (VXLAN_GPE_PROTOCOL_IP6, |
| VXLAN_GPE_INPUT_NEXT_IP6_INPUT); |
| vxlan_gpe_register_decap_protocol (VXLAN_GPE_PROTOCOL_ETHERNET, |
| VXLAN_GPE_INPUT_NEXT_L2_INPUT); |
| |
| fib_node_register_type (FIB_NODE_TYPE_VXLAN_GPE_TUNNEL, &vxlan_gpe_vft); |
| |
| return 0; |
| } |
| |
| VLIB_INIT_FUNCTION (vxlan_gpe_init); |
| |
| |
| /* |
| * fd.io coding-style-patch-verification: ON |
| * |
| * Local Variables: |
| * eval: (c-set-style "gnu") |
| * End: |
| */ |