#!/bin/bash

function die() {
	echo "ERROR: $*" >&2
	exit 1
}
function pci-unbind() {
	echo $1 | sudo tee /sys/bus/pci/devices/$1/driver/unbind > /dev/null
}
function pci-bind() {
	pci-unbind $1
	echo $2 | sudo tee /sys/bus/pci/devices/$1/driver_override > /dev/null
	echo $1 | sudo tee /sys/bus/pci/drivers/$2/bind > /dev/null
	echo | sudo tee /sys/bus/pci/devices/$1/driver_override > /dev/null
}

function show_vfs() {
	path=$1
	netdev=$2
	printf "\nVirtual Functions:\n%-2s %-12s %-9s %-12s %-17s %s\n" \
	  "ID" "PCI Addr" "PCI ID" "Driver" "MAC Addr" "Config"
	for vf_path in ${path}/virtfn*; do
		vf=$(basename $(readlink ${vf_path}))
		vfid=$(basename ${vf_path//virtfn/})
		line=$(ip link show dev ${netdev} | grep "vf ${vfid}")
		driver=$(basename $(readlink ${vf_path}/driver))
		pciid="$(cat ${vf_path}/vendor | cut -dx -f2):$(cat ${vf_path}/device | cut -dx -f2)"
		mac=$(echo $line | sed -n -E -e 's/.*MAC ([0-9a-f:]+),.*/\1/p')
		cfg=$(echo $line | cut -d, -f2-)

		printf "%-2s %-12s %-9s %-12s %-17s%s\n" \
		  $vfid $vf $pciid $driver $mac "$cfg"
	done
}
function get_pci_addr() {
	local addr
	if [ -d /sys/class/net/$2/device ]; then
		addr=$(basename $(readlink /sys/class/net/${2}/device))
	else
		addr=$2
	fi
	if [ ! -d /sys/bus/pci/devices/${pci_addr} ]; then
		die "PCI device $2 doesn't exist"
	fi
	eval "$1=${addr}"
}

function show () {
	get_pci_addr pci_addr $1
	path="/sys/bus/pci/devices/${pci_addr}"

	if [ ! -f ${path}/sriov_numvfs ]; then
		die "PCI device $1 is not SR-IOV device"
	fi

	printf "%-20s: %s\n" "PCI Address" ${pci_addr}
	printf "%-20s: %s\n" "PCI ID" \
		"$(cat ${path}/vendor | cut -dx -f2):$(cat ${path}/device | cut -dx -f2)"
	printf "%-20s: %s\n" "Driver name" $(basename $(readlink ${path}/driver))
	printf "%-20s: %s\n" "Driver Version" $(cat ${path}/driver/module/version)
	printf "%-20s: %s\n" "PCI Link Speed (max)" "$(cat ${path}/current_link_speed) ($(cat ${path}/max_link_speed))"
	printf "%-20s: %s\n" "PCI Link Width (max)" "$(cat ${path}/current_link_width) ($(cat ${path}/max_link_width))"
	printf "%-20s: %s\n" "NUMA Node" $(cat ${path}/numa_node)
	printf "%-20s: %s\n" "Number of VFs" $(cat ${path}/sriov_numvfs)
	printf "%-20s: %s\n" "Total VFs" $(cat ${path}/sriov_totalvfs)
	if [ -d ${path}/net/* ] ; then
		netdev=$(basename ${path}/net/*)
		netdev_path=${path}/net/${netdev}
		printf "%-20s: %s\n" "Interface" ${netdev}
		printf "%-20s: %s\n" "MAC Address" $(cat ${netdev_path}/address)
		printf "%-20s: %s\n" "Speed" $(cat ${netdev_path}/speed)
		printf "%-20s: %s\n" "State" $(cat ${netdev_path}/operstate)
	fi

	[ $(cat ${path}/sriov_numvfs) -gt 0 ] && show_vfs ${path} ${netdev}
}

function remove_all () {
	get_pci_addr pci_addr $1
	path="/sys/bus/pci/devices/${pci_addr}"
	[ $(cat ${path}/sriov_numvfs) -gt 0 ] || die "No VFs configured on $1"
	echo 0 | sudo tee ${path}/sriov_numvfs > /dev/null
	echo "VFs removed..."
}

function create () {
	get_pci_addr pci_addr $1
	path="/sys/bus/pci/devices/${pci_addr}"
	[ $(cat ${path}/sriov_numvfs) -gt 0 ] && die "VFs already configured on $1"
	[ "0$2" -gt 0 ] || die "Please specify number of VFs to create"
	echo $2 | sudo tee ${path}/sriov_numvfs > /dev/null
	[ -d ${path}/net/* ] || die "No net device for $1"
	netdev=$(basename ${path}/net/*)
	netdev_path=${path}/net/${netdev}

	mac_prefix=$(cat ${netdev_path}/address | cut -d: -f1,3,4,5,6 )
	for vf_path in ${path}/virtfn*; do
		vf=$(basename $(readlink ${vf_path}))
		vfid=$(basename ${vf_path//virtfn/})
		mac="${mac_prefix}:$(printf "%02x" ${vfid})"
		sudo ip link set dev ${netdev} vf ${vfid} mac ${mac}
		sudo ip link set dev ${netdev} vf ${vfid} trust on
		sudo ip link set dev ${netdev} vf ${vfid} spoofchk off
		pci-bind ${vf} vfio-pci
	done

	[ $(cat ${path}/sriov_numvfs) -gt 0 ] && show_vfs ${path} ${netdev}
}

function help() {

cat << __EOF__

$0 show <dev>
  Displays information about <dev> where <dev> is PCI address
  or linux interface name.

$0 remove-all <dev>
  Remove all virtual functions from device <dev>.

$0 create <dev> <num>
  Create <num> virtual functions on device<dev>.
__EOF__
}

case $1 in
	show)
		show $2
		;;
	create)
		create $2 $3
		;;
	remove-all)
		remove_all $2
		;;
	help)
		help $2
		;;
	*)
		echo "Please specify command (show, create, remove-all)"
		help
		;;
esac