# Copyright (c) 2016 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

"""VPP Grub Utility Library."""

import re

from vpplib.VPPUtil import VPPUtil

__all__ = ['VppGrubUtil']


class VppGrubUtil(object):
    """ VPP Grub Utilities."""

    def _get_current_cmdline(self):
        """
        Using /proc/cmdline return the current grub cmdline

        :returns: The current grub cmdline
        :rtype: string
        """

        # Get the memory information using /proc/meminfo
        cmd = 'sudo cat /proc/cmdline'
        (ret, stdout, stderr) = VPPUtil.exec_command(cmd)
        if ret != 0:
            raise RuntimeError('{} on node {} {} {}'.
                               format(cmd, self._node['host'],
                                      stdout, stderr))

        self._current_cmdline = stdout.strip('\n')

    def _get_default_cmdline(self):
        """
        Using /etc/default/grub return the default grub cmdline

        :returns: The default grub cmdline
        :rtype: string
        """

        # Get the default grub cmdline
        rootdir = self._node['rootdir']
        gfile = self._node['cpu']['grub_config_file']
        grubcmdline = self._node['cpu']['grubcmdline']
        cmd = 'cat {}'.format(rootdir + gfile)
        (ret, stdout, stderr) = VPPUtil.exec_command(cmd)
        if ret != 0:
            raise RuntimeError('{} Executing failed on node {} {}'.
                               format(cmd, self._node['host'], stderr))

        # Get the Default Linux command line, ignoring commented lines
        lines = stdout.split('\n')
        for line in lines:
            if line == '' or line[0] == '#':
                continue
            ldefault = re.findall(r'{}=.+'.format(grubcmdline), line)
            if ldefault:
                self._default_cmdline = ldefault[0]
                break

    def get_current_cmdline(self):
        """
        Returns the saved grub cmdline

        :returns: The saved grub cmdline
        :rtype: string
        """
        return self._current_cmdline

    def get_default_cmdline(self):
        """
        Returns the default grub cmdline

        :returns: The default grub cmdline
        :rtype: string
        """
        return self._default_cmdline

    def create_cmdline(self, isolated_cpus):
        """
        Create the new grub cmdline

        :param isolated_cpus: The isolated cpu string
        :type isolated_cpus: string
        :returns: The command line
        :rtype: string
        """
        grubcmdline = self._node['cpu']['grubcmdline']
        cmdline = self._default_cmdline
        value = cmdline.split('{}='.format(grubcmdline))[1]
        value = value.rstrip('"').lstrip('"')

        # jadfix intel_pstate=disable sometimes cause networks to
        # hang on reboot
        # iommu = re.findall(r'iommu=\w+', value)
        # pstate = re.findall(r'intel_pstate=\w+', value)
        # If there is already some iommu commands set, leave them,
        # if not use ours
        # if iommu == [] and pstate == []:
        #    value = '{} intel_pstate=disable'.format(value)

        # Replace isolcpus with ours
        isolcpus = re.findall(r'isolcpus=[\w+\-,]+', value)
        if not isolcpus:
            if isolated_cpus != '':
                value = "{} isolcpus={}".format(value, isolated_cpus)
        else:
            if isolated_cpus != '':
                value = re.sub(r'isolcpus=[\w+\-,]+',
                               'isolcpus={}'.format(isolated_cpus),
                               value)
            else:
                value = re.sub(r'isolcpus=[\w+\-,]+', '', value)

        nohz = re.findall(r'nohz_full=[\w+\-,]+', value)
        if not nohz:
            if isolated_cpus != '':
                value = "{} nohz_full={}".format(value, isolated_cpus)
        else:
            if isolated_cpus != '':
                value = re.sub(r'nohz_full=[\w+\-,]+',
                               'nohz_full={}'.format(isolated_cpus),
                               value)
            else:
                value = re.sub(r'nohz_full=[\w+\-,]+', '', value)

        rcu = re.findall(r'rcu_nocbs=[\w+\-,]+', value)
        if not rcu:
            if isolated_cpus != '':
                value = "{} rcu_nocbs={}".format(value, isolated_cpus)
        else:
            if isolated_cpus != '':
                value = re.sub(r'rcu_nocbs=[\w+\-,]+',
                               'rcu_nocbs={}'.format(isolated_cpus),
                               value)
            else:
                value = re.sub(r'rcu_nocbs=[\w+\-,]+', '', value)

        value = value.lstrip(' ').rstrip(' ')
        cmdline = '{}="{}"'.format(grubcmdline, value)
        return cmdline

    def apply_cmdline(self, node, isolated_cpus):
        """
        Apply cmdline to the default grub file

        :param node: Node dictionary with cpuinfo.
        :param isolated_cpus: The isolated cpu string
        :type node: dict
        :type isolated_cpus: string
        :return The vpp cmdline
        :rtype string
        """

        vpp_cmdline = self.create_cmdline(isolated_cpus)
        if vpp_cmdline == '':
            return vpp_cmdline

        # Update grub
        # Save the original file
        rootdir = node['rootdir']
        grubcmdline = node['cpu']['grubcmdline']
        ofilename = rootdir + node['cpu']['grub_config_file'] + '.orig'
        filename = rootdir + node['cpu']['grub_config_file']

        # Write the output file
        # Does a copy of the original file exist, if not create one
        (ret, stdout, stderr) = VPPUtil.exec_command('ls {}'.format(ofilename))
        if ret != 0:
            if stdout.strip('\n') != ofilename:
                cmd = 'sudo cp {} {}'.format(filename, ofilename)
                (ret, stdout, stderr) = VPPUtil.exec_command(cmd)
                if ret != 0:
                    raise RuntimeError('{} failed on node {} {}'.
                                       format(cmd, self._node['host'], stderr))

        # Get the contents of the current grub config file
        cmd = 'cat {}'.format(filename)
        (ret, stdout, stderr) = VPPUtil.exec_command(cmd)
        if ret != 0:
            raise RuntimeError('{} failed on node {} {}'.format(
                cmd,
                self._node['host'],
                stderr))

        # Write the new contents
        # Get the Default Linux command line, ignoring commented lines
        content = ""
        lines = stdout.split('\n')
        for line in lines:
            if line == '':
                content += line + '\n'
                continue
            if line[0] == '#':
                content += line + '\n'
                continue

            ldefault = re.findall(r'{}=.+'.format(grubcmdline), line)
            if ldefault:
                content += vpp_cmdline + '\n'
            else:
                content += line + '\n'

        content = content.replace(r"`", r"\`")
        content = content.rstrip('\n')
        cmd = "sudo cat > {0} << EOF\n{1}\n".format(filename, content)
        (ret, stdout, stderr) = VPPUtil.exec_command(cmd)
        if ret != 0:
            raise RuntimeError('{} failed on node {} {}'.format(
                cmd,
                self._node['host'],
                stderr))

        return vpp_cmdline

    def __init__(self, node):
        distro = VPPUtil.get_linux_distro()
        if distro[0] == 'Ubuntu':
            node['cpu']['grubcmdline'] = 'GRUB_CMDLINE_LINUX_DEFAULT'
        else:
            node['cpu']['grubcmdline'] = 'GRUB_CMDLINE_LINUX'

        self._node = node
        self._current_cmdline = ""
        self._default_cmdline = ""
        self._get_current_cmdline()
        self._get_default_cmdline()