Initial commit of vpp code.
Change-Id: Ib246f1fbfce93274020ee93ce461e3d8bd8b9f17
Signed-off-by: Ed Warnicke <eaw@cisco.com>
diff --git a/vnet/etc/scripts/ludd-cluster-3/lc3.script b/vnet/etc/scripts/ludd-cluster-3/lc3.script
new file mode 100644
index 0000000..153988c
--- /dev/null
+++ b/vnet/etc/scripts/ludd-cluster-3/lc3.script
@@ -0,0 +1,9 @@
+l2tp_set_lookup_key lookup_v6_src
+
+sw_interface_add_del_address GigabitEthernet2/3/0 db03::1/64
+sw_interface_set_flags GigabitEthernet2/3/0 admin-up
+
+comment sw_interface_add_del_address GigabitEthernet2/4/0 db02::2/64
+sw_interface_set_flags GigabitEthernet2/4/0 admin-up
+
+l2tp_session_add_del client_address db03::2 our_address db03::1 GigabitEthernet2/4/0 local_session_id 3 remote_session_id 1 local_cookie 33 remote_cookie 11
diff --git a/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-ioam.conf b/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-ioam.conf
new file mode 100644
index 0000000..88b5ab2
--- /dev/null
+++ b/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-ioam.conf
@@ -0,0 +1,14 @@
+comment { connects to ludd-cluster-4 eth3 addr db04::4/64 }
+set int ip address GigabitEthernet2/4/0 db04::1/64
+set int state GigabitEthernet2/4/0 up
+
+comment { connects to ioam domain ludd-cluster-1 addr db03::1/64 }
+set int ip address GigabitEthernet2/3/0 db03::3/64
+set int state GigabitEthernet2/3/0 up
+
+set ip6 neighbor GigabitEthernet2/3/0 db03::1 00:50:56:b7:05:bf
+set ip6 neighbor GigabitEthernet2/4/0 db04::4 00:50:56:b7:05:d2
+
+ip route add db02::0/64 via db03::1
+
+ioam set destination db04::4/128 pop
diff --git a/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-l3vxlan.conf b/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-l3vxlan.conf
new file mode 100644
index 0000000..94357d7
--- /dev/null
+++ b/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-l3vxlan.conf
@@ -0,0 +1,12 @@
+comment { local client facing interface on vlan 102 }
+
+comment { configure client lc4 eth1 }
+set int ip address GigabitEthernet2/4/0 6.0.4.1/24
+set int state GigabitEthernet2/4/0 up
+
+comment { tunnel to ludd-cluster-1 on vlan 101 }
+set int ip address GigabitEthernet2/3/0 6.0.3.3/24
+set int state GigabitEthernet2/3/0 up
+
+vxlan tunnel src 6.0.3.3 peer 6.0.3.1 vni 123 adj 6.0.2.0/24
+
diff --git a/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-lisp.conf b/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-lisp.conf
new file mode 100644
index 0000000..faab4bf
--- /dev/null
+++ b/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-lisp.conf
@@ -0,0 +1,16 @@
+comment { local client facing interface on vlan 102 }
+comment { configure lc4 eth1 at e.g. 6.0.4.4/24 }
+
+set int ip address GigabitEthernet2/4/0 6.0.4.1/24
+set int state GigabitEthernet2/4/0 up
+
+comment { tunnel to ludd-cluster-1 on vlan 101 }
+set int ip address GigabitEthernet2/3/0 6.0.3.3/24
+set int state GigabitEthernet2/3/0 up
+
+lisp gpe tunnel src 6.0.3.3 dst 6.0.3.1 next-ip4 decap-next ip4 iid 3311
+set int ip address lisp_gpe_tunnel0 6.0.2.3/24
+set int state lisp_gpe_tunnel0 up
+
+lisp gpe tunnel src 6.0.3.1 dst 6.0.3.3 next-ip4 decap-next ip4 iid 1133
+set int state lisp_gpe_tunnel1 up
diff --git a/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-mpls-l2.conf b/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-mpls-l2.conf
new file mode 100644
index 0000000..2d94b2b
--- /dev/null
+++ b/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-mpls-l2.conf
@@ -0,0 +1,24 @@
+comment { vpe_phase1d configuration }
+
+comment { local client facing interface on vlan 102 }
+comment { configure lc4 eth1 at e.g. 6.0.4.4/24 }
+
+set int ip table GigabitEthernet2/4/0 1
+set int ip address GigabitEthernet2/4/0 6.0.4.1/24
+set int state GigabitEthernet2/4/0 up
+
+comment { tunnel to ludd-cluster-1 on vlan 101 }
+set int ip address GigabitEthernet2/3/0 6.0.3.3/24
+set int state GigabitEthernet2/3/0 up
+
+mpls encap add label 30 fib 1 dest 6.0.3.1
+mpls decap add label 30 next output GigabitEthernet2/4/0
+
+comment { create mpls gre tunnel src 6.0.3.3 dst 6.0.3.1 intfc 6.0.2.1/24 inner-fib-id 1 outer-fib-id 0 l2-only }
+
+comment {set int l2 xconnect GigabitEthernet2/4/0 mpls-gre0 }
+
+uncomment { create mpls ethernet tunnel dst 00:50:56:b7:05:bf adj 6.0.3.1/8 l2-only tx-intfc GigabitEthernet2/3/0 fib-id 1 }
+
+uncomment { set int l2 xconnect GigabitEthernet2/4/0 mpls-eth0 }
+
diff --git a/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-mpls.conf b/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-mpls.conf
new file mode 100644
index 0000000..ea8b75f
--- /dev/null
+++ b/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-mpls.conf
@@ -0,0 +1,17 @@
+comment { vpe_phase1d configuration }
+
+comment { local client facing interface on vlan 102 }
+comment { configure lc4 eth1 at e.g. 6.0.4.4/24 }
+
+set int ip table GigabitEthernet2/4/0 1
+set int ip address GigabitEthernet2/4/0 6.0.4.1/24
+set int state GigabitEthernet2/4/0 up
+
+comment { tunnel to ludd-cluster-1 on vlan 101 }
+set int ip address GigabitEthernet2/3/0 6.0.3.3/24
+set int state GigabitEthernet2/3/0 up
+
+mpls encap add label 30 fib 1 dest 6.0.3.1
+mpls decap add label 30 fib 1
+
+create mpls gre tunnel src 6.0.3.3 dst 6.0.3.1 intfc 6.0.2.1/24 inner-fib-id 1 outer-fib-id 0
diff --git a/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-nsh.conf b/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-nsh.conf
new file mode 100644
index 0000000..7a67b9a
--- /dev/null
+++ b/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-nsh.conf
@@ -0,0 +1,19 @@
+comment { vpe_phase1d configuration }
+
+comment { local client facing interface on vlan 102 }
+comment { configure lc4 eth1 at e.g. 6.0.4.4/24 }
+
+set int ip address GigabitEthernet2/4/0 6.0.4.1/24
+set int state GigabitEthernet2/4/0 up
+
+comment { tunnel to ludd-cluster-1 on vlan 101 }
+set int ip address GigabitEthernet2/3/0 6.0.3.3/24
+set int state GigabitEthernet2/3/0 up
+
+nsh gre tunnel src 6.0.3.3 dst 6.0.3.1 c1 1 c2 2 c3 3 c4 4 spi 3311 si 0 next-ip4
+set int ip address nsh_gre_tunnel0 6.0.2.3/24
+set int state nsh_gre_tunnel0 up
+
+nsh gre tunnel src 6.0.3.1 dst 6.0.3.3 c1 1 c2 2 c3 3 c4 4 spi 1133 si 0 next-ip4
+set int state nsh_gre_tunnel1 up
+
diff --git a/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-sr.conf b/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-sr.conf
new file mode 100644
index 0000000..d9cf576
--- /dev/null
+++ b/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-sr.conf
@@ -0,0 +1,28 @@
+comment { test sr segment chunk-offset on }
+test sr hmac validate on
+
+comment { trunk to ludd-cluster-1 }
+set int ip address GigabitEthernet2/3/0 db03::1/64
+enable ip6 interface GigabitEthernet2/3/0
+set int state GigabitEthernet2/3/0 up
+
+comment { subscriber ludd-cluster-4 }
+set int ip address GigabitEthernet2/4/0 db04::2/64
+
+comment { next address to fake out ND on shared LAN segment }
+comment { set int ip address GigabitEthernet2/4/0 db02::13/64 }
+
+enable ip6 interface GigabitEthernet2/4/0
+set int state GigabitEthernet2/4/0 up
+
+sr hmac id 2 key Gozzer
+sr hmac id 3 key Hoser
+
+sr tunnel src db04::1 dst db02::1/128 next db03::2 next db02::1 tag db04::2 clean key Hoser
+
+tap connect srlocal hwaddr random
+set int ip6 table tap-0 1
+set int ip address tap-0 db04::99/64
+enable ip6 interface tap-0
+set int state tap-0 up
+ip route add table 1 db02::0/64 lookup in table 0
diff --git a/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-vxlan.conf b/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-vxlan.conf
new file mode 100644
index 0000000..3caa65f
--- /dev/null
+++ b/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-vxlan.conf
@@ -0,0 +1,16 @@
+
+comment { local client facing interface on vlan 102 }
+
+comment { configure client lc4 eth1 }
+set int state GigabitEthernet2/4/0 up
+
+comment { tunnel to ludd-cluster-1 on vlan 101 }
+set int ip address GigabitEthernet2/3/0 6.0.3.3/24
+set int state GigabitEthernet2/3/0 up
+
+comment { tunnel to ludd-cluster-5 on vlan 105 }
+set int ip address GigabitEthernet2/7/0 6.0.5.3/24
+set int state GigabitEthernet2/3/0 up
+
+vxlan tunnel src 6.0.3.3 peer 6.0.3.1 peer 6.0.3.5 vni 123
+vxlan l2 GigabitEthernet2/4/0 vni 123
diff --git a/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-vxnsh.conf b/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-vxnsh.conf
new file mode 100644
index 0000000..628b566
--- /dev/null
+++ b/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-vxnsh.conf
@@ -0,0 +1,18 @@
+comment { vpe_phase1d configuration }
+
+comment { local client facing interface on vlan 102 }
+comment { configure lc4 eth1 at e.g. 6.0.4.4/24 }
+
+set int ip address GigabitEthernet2/4/0 6.0.4.1/24
+set int state GigabitEthernet2/4/0 up
+
+comment { tunnel to ludd-cluster-1 on vlan 101 }
+set int ip address GigabitEthernet2/3/0 6.0.3.3/24
+set int state GigabitEthernet2/3/0 up
+
+nsh vxlan tunnel src 6.0.3.3 dst 6.0.3.1 c1 1 c2 2 c3 3 c4 4 vni 33 spi 3311 si 0 next-ip4
+set int ip address nsh_vxlan_gpe_tunnel0 6.0.2.3/24
+set int state nsh_vxlan_gpe_tunnel0 up
+
+nsh vxlan tunnel src 6.0.3.1 dst 6.0.3.3 c1 1 c2 2 c3 3 c4 4 vni 11 spi 1133 si 0 next-ip4
+set int state nsh_vxlan_gpe_tunnel1 up