docs: convert vpp doc md->rst
Type: improvement
Change-Id: If453321785b04f9c16e8cea36fb1910efaeb2c59
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
diff --git a/src/vpp-api/vapi/vapi_doc.md b/src/vpp-api/vapi/vapi_doc.md
deleted file mode 100644
index 0e7e29d..0000000
--- a/src/vpp-api/vapi/vapi_doc.md
+++ /dev/null
@@ -1,155 +0,0 @@
-# VPP API module {#vapi_doc}
-
-## Overview
-
-VPP API module allows communicating with VPP over shared memory interface.
-The API consists of 3 parts:
-
-* common code - low-level API
-* generated code - high-level API
-* code generator - to generate your own high-level API e.g. for custom plugins
-
-### Common code
-
-#### C common code
-
-C common code represents the basic, low-level API, providing functions to
-connect/disconnect, perform message discovery and send/receive messages.
-The C variant is in vapi.h.
-
-#### C++ common code
-
-C++ is provided by vapi.hpp and contains high-level API templates,
-which are specialized by generated code.
-
-### Generated code
-
-Each API file present in the source tree is automatically translated to JSON
-file, which the code generator parses and generates either C (`vapi_c_gen.py`)
-or C++ (`vapi_cpp_gen.py`) code.
-
-This can then be included in the client application and provides convenient way
-to interact with VPP. This includes:
-
-* automatic byte-swapping
-* automatic request-response matching based on context
-* automatic casts to appropriate types (type-safety) when calling callbacks
-* automatic sending of control-pings for dump messages
-
-The API supports two modes of operation:
-
-* blocking
-* non-blocking
-
-In blocking mode, whenever an operation is initiated, the code waits until it
-can finish. This means that when sending a message, the call blocks until
-the message can be written to shared memory. Similarly, receiving a message
-blocks until a message becomes available. On higher level, this also means that
-when doing a request (e.g. `show_version`), the call blocks until a response
-comes back (e.g. `show_version_reply`).
-
-In non-blocking mode, these are decoupled, the API returns VAPI_EAGAIN whenever
-an operation cannot be performed and after sending a request, it's up to
-the client to wait for and process a response.
-
-### Code generator
-
-Python code generator comes in two flavors - C and C++ and generates high-level
-API headers. All the code is stored in the headers.
-
-## Usage
-
-### Low-level API
-
-Refer to inline API documentation in doxygen format in `vapi.h` header
-for description of functions. It's recommened to use the safer, high-level
-API provided by specialized headers (e.g. `vpe.api.vapi.h`
-or `vpe.api.vapi.hpp`).
-
-#### C high-level API
-
-##### Callbacks
-
-The C high-level API is strictly callback-based for maximum efficiency.
-Whenever an operation is initiated a callback with a callback context is part
-of that operation. The callback is then invoked when the response (or multiple
-responses) arrive which are tied to the request. Also, callbacks are invoked
-whenever an event arrives, if such callback is registered. All the pointers
-to responses/events point to shared memory and are immediately freed after
-callback finishes so the client needs to extract/copy any data in which it
-is interested in.
-
-#### Blocking mode
-
-In simple blocking mode, the whole operation (being a simple request or a dump)
-is finished and it's callback is called (potentially multiple times for dumps)
-during function call.
-
-Example pseudo-code for a simple request in this mode:
-
-`
-vapi_show_version(message, callback, callback_context)
-
-1. generate unique internal context and assign it to message.header.context
-2. byteswap the message to network byte order
-3. send message to vpp (message is now consumed and vpp will free it)
-4. create internal "outstanding request context" which stores the callback,
- callback context and the internal context value
-5. call dispatch, which in this mode receives and processes responses until
- the internal "outstanding requests" queue is empty. In blocking mode, this
- queue always contains at most one item.
-`
-
-**Note**: it's possible for different - unrelated callbacks to be called before
-the response callbacks is called in cases where e.g. events are stored
-in shared memory queue.
-
-#### Non-blocking mode
-
-In non-blocking mode, all the requests are only byte-swapped and the context
-information along with callbacks is stored locally (so in the above example,
-only steps 1-4 are executed and step 5 is skipped). Calling dispatch is up to
-the client application. This allows to alternate between sending/receiving
-messages or have a dedicated thread which calls dispatch.
-
-### C++ high level API
-
-#### Callbacks
-
-In C++ API, the response is automatically tied to the corresponding `Request`,
-`Dump` or `Event_registration` object. Optionally a callback might be specified,
-which then gets called when the response is received.
-
-**Note**: responses take up shared memory space and should be freed either
-manually (in case of result sets) or automatically (by destroying the object
-owning them) when no longer needed. Once a Request or Dump object was executed,
-it cannot be re-sent, since the request itself (stores in shared memory)
-is consumed by vpp and inaccessible (set to nullptr) anymore.
-
-#### Usage
-
-#### Requests & dumps
-
-0. Create on object of `Connection` type and call `connect()` to connect to vpp.
-1. Create an object of `Request` or `Dump` type using it's typedef (e.g.
- `Show_version`)
-2. Use `get_request()` to obtain and manipulate the underlying request if
- required.
-3. Issue `execute()` to send the request.
-4. Use either `wait_for_response()` or `dispatch()` to wait for the response.
-5. Use `get_response_state()` to get the state and `get_response()` to read
- the response.
-
-#### Events
-
-0. Create a `Connection` and execute the appropriate `Request` to subscribe to
- events (e.g. `Want_stats`)
-1. Create an `Event_registration` with a template argument being the type of
- event you are insterested in.
-2. Call `dispatch()` or `wait_for_response()` to wait for the event. A callback
- will be called when an event occurs (if passed to `Event_registration()`
- constructor). Alternatively, read the result set.
-
-**Note**: events stored in the result set take up space in shared memory
-and should be freed regularly (e.g. in the callback, once the event is
-processed).
diff --git a/src/vpp-api/vapi/vapi_doc.rst b/src/vpp-api/vapi/vapi_doc.rst
new file mode 100644
index 0000000..4efbf2d
--- /dev/null
+++ b/src/vpp-api/vapi/vapi_doc.rst
@@ -0,0 +1,191 @@
+.. _vapi_doc:
+
+VPP API module
+==============
+
+Overview
+--------
+
+VPP API module allows communicating with VPP over shared memory
+interface. The API consists of 3 parts:
+
+- common code - low-level API
+- generated code - high-level API
+- code generator - to generate your own high-level API e.g. for custom
+ plugins
+
+Common code
+~~~~~~~~~~~
+
+C common code
+^^^^^^^^^^^^^
+
+C common code represents the basic, low-level API, providing functions
+to connect/disconnect, perform message discovery and send/receive
+messages. The C variant is in vapi.h.
+
+.. _c-common-code-1:
+
+C++ common code
+^^^^^^^^^^^^^^^
+
+C++ is provided by vapi.hpp and contains high-level API templates, which
+are specialized by generated code.
+
+Generated code
+~~~~~~~~~~~~~~
+
+Each API file present in the source tree is automatically translated to
+JSON file, which the code generator parses and generates either C
+(``vapi_c_gen.py``) or C++ (``vapi_cpp_gen.py``) code.
+
+This can then be included in the client application and provides
+convenient way to interact with VPP. This includes:
+
+- automatic byte-swapping
+- automatic request-response matching based on context
+- automatic casts to appropriate types (type-safety) when calling
+ callbacks
+- automatic sending of control-pings for dump messages
+
+The API supports two modes of operation:
+
+- blocking
+- non-blocking
+
+In blocking mode, whenever an operation is initiated, the code waits
+until it can finish. This means that when sending a message, the call
+blocks until the message can be written to shared memory. Similarly,
+receiving a message blocks until a message becomes available. On higher
+level, this also means that when doing a request
+(e.g. ``show_version``), the call blocks until a response comes back
+(e.g. ``show_version_reply``).
+
+In non-blocking mode, these are decoupled, the API returns VAPI_EAGAIN
+whenever an operation cannot be performed and after sending a request,
+it’s up to the client to wait for and process a response.
+
+Code generator
+~~~~~~~~~~~~~~
+
+Python code generator comes in two flavors - C and C++ and generates
+high-level API headers. All the code is stored in the headers.
+
+Usage
+-----
+
+Low-level API
+~~~~~~~~~~~~~
+
+Refer to inline API documentation in doxygen format in ``vapi.h`` header
+for description of functions. It’s recommended to use the safer,
+high-level API provided by specialized headers (e.g. ``vpe.api.vapi.h``
+or ``vpe.api.vapi.hpp``).
+
+C high-level API
+^^^^^^^^^^^^^^^^
+
+Callbacks
+'''''''''
+
+The C high-level API is strictly callback-based for maximum efficiency.
+Whenever an operation is initiated a callback with a callback context is
+part of that operation. The callback is then invoked when the response
+(or multiple responses) arrive which are tied to the request. Also,
+callbacks are invoked whenever an event arrives, if such callback is
+registered. All the pointers to responses/events point to shared memory
+and are immediately freed after callback finishes so the client needs to
+extract/copy any data in which it is interested in.
+
+Blocking mode
+^^^^^^^^^^^^^
+
+In simple blocking mode, the whole operation (being a simple request or
+a dump) is finished and it’s callback is called (potentially multiple
+times for dumps) during function call.
+
+Example pseudo-code for a simple request in this mode:
+
+\` vapi_show_version(message, callback, callback_context)
+
+1. generate unique internal context and assign it to
+ message.header.context
+2. byteswap the message to network byte order
+3. send message to vpp (message is now consumed and vpp will free it)
+4. create internal “outstanding request context” which stores the
+ callback, callback context and the internal context value
+5. call dispatch, which in this mode receives and processes responses
+ until the internal “outstanding requests” queue is empty. In blocking
+ mode, this queue always contains at most one item. \`
+
+**Note**: it’s possible for different - unrelated callbacks to be called
+before the response callbacks is called in cases where e.g. events are
+stored in shared memory queue.
+
+Non-blocking mode
+^^^^^^^^^^^^^^^^^
+
+In non-blocking mode, all the requests are only byte-swapped and the
+context information along with callbacks is stored locally (so in the
+above example, only steps 1-4 are executed and step 5 is skipped).
+Calling dispatch is up to the client application. This allows to
+alternate between sending/receiving messages or have a dedicated thread
+which calls dispatch.
+
+.. _c-high-level-api-1:
+
+C++ high level API
+~~~~~~~~~~~~~~~~~~
+
+.. _callbacks-1:
+
+Callbacks
+^^^^^^^^^
+
+In C++ API, the response is automatically tied to the corresponding
+``Request``, ``Dump`` or ``Event_registration`` object. Optionally a
+callback might be specified, which then gets called when the response is
+received.
+
+**Note**: responses take up shared memory space and should be freed
+either manually (in case of result sets) or automatically (by destroying
+the object owning them) when no longer needed. Once a Request or Dump
+object was executed, it cannot be re-sent, since the request itself
+(stores in shared memory) is consumed by vpp and inaccessible (set to
+nullptr) anymore.
+
+.. _usage-1:
+
+Usage
+^^^^^
+
+Requests & dumps
+^^^^^^^^^^^^^^^^
+
+0. Create on object of ``Connection`` type and call ``connect()`` to
+ connect to vpp.
+1. Create an object of ``Request`` or ``Dump`` type using it’s typedef
+ (e.g. ``Show_version``)
+2. Use ``get_request()`` to obtain and manipulate the underlying request
+ if required.
+3. Issue ``execute()`` to send the request.
+4. Use either ``wait_for_response()`` or ``dispatch()`` to wait for the
+ response.
+5. Use ``get_response_state()`` to get the state and ``get_response()``
+ to read the response.
+
+Events
+^^^^^^
+
+0. Create a ``Connection`` and execute the appropriate ``Request`` to
+ subscribe to events (e.g. ``Want_stats``)
+1. Create an ``Event_registration`` with a template argument being the
+ type of event you are interested in.
+2. Call ``dispatch()`` or ``wait_for_response()`` to wait for the event.
+ A callback will be called when an event occurs (if passed to
+ ``Event_registration()`` constructor). Alternatively, read the result
+ set.
+
+**Note**: events stored in the result set take up space in shared memory
+and should be freed regularly (e.g. in the callback, once the event is
+processed).