stats: python vpp_stats rewrite to access stat segment directly
This module implement Python access to the VPP statistics segment. It
accesses the data structures directly in shared memory.
VPP uses optimistic locking, so data structures may change underneath
us while we are reading. Data is copied out and it's important to
spend as little time as possible "holding the lock".
Counters are stored in VPP as a two dimensional array.
Index by thread and index (typically sw_if_index).
Simple counters count only packets, Combined counters count packets
and octets.
Counters can be accessed in either dimension.
stat['/if/rx'] - returns 2D lists
stat['/if/rx'][0] - returns counters for all interfaces for thread 0
stat['/if/rx'][0][1] - returns counter for interface 1 on thread 0
stat['/if/rx'][0][1]['packets'] - returns the packet counter
for interface 1 on thread 0
stat['/if/rx'][:, 1] - returns the counters for interface 1 on all threads
stat['/if/rx'][:, 1].packets() - returns the packet counters for
interface 1 on all threads
stat['/if/rx'][:, 1].sum_packets() - returns the sum of packet counters for
interface 1 on all threads
stat['/if/rx-miss'][:, 1].sum() - returns the sum of packet counters for
interface 1 on all threads for simple counters
Type: refactor
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I1fe7f7c7d11378d06be8276db5e1900ecdb8f515
Signed-off-by: Ole Troan <ot@cisco.com>
diff --git a/src/plugins/urpf/test/test_urpf.py b/src/plugins/urpf/test/test_urpf.py
index 64b246c..8f4e563 100644
--- a/src/plugins/urpf/test/test_urpf.py
+++ b/src/plugins/urpf/test/test_urpf.py
@@ -90,7 +90,8 @@
# packets from address to which there is no route are dropped
self.send_and_assert_no_replies(self.pg0, p_spoof_loose)
- self.assert_error_counter_equal("ip4-rx-urpf-loose", N_PKTS)
+ self.assert_error_counter_equal("/err/ip4-rx-urpf-loose/uRPF Drop",
+ N_PKTS)
#
# crank it up to strict mode
@@ -106,7 +107,8 @@
self.send_and_assert_no_replies(self.pg0, p_spoof_strict)
self.send_and_assert_no_replies(self.pg0, p_spoof_loose)
- self.assert_error_counter_equal("ip4-rx-urpf-strict", 2 * N_PKTS)
+ self.assert_error_counter_equal("/err/ip4-rx-urpf-strict/uRPF Drop",
+ 2 * N_PKTS)
#
# disable uRPF, all traffic should pass
@@ -136,7 +138,8 @@
self.send_and_expect(self.pg0, p_spoof_strict, self.pg1)
self.send_and_assert_no_replies(self.pg0, p_spoof_loose)
- self.assert_error_counter_equal("ip4-tx-urpf-loose", N_PKTS)
+ self.assert_error_counter_equal("/err/ip4-tx-urpf-loose/uRPF Drop",
+ N_PKTS)
self.vapi.urpf_update(is_input=False,
mode=e.vl_api_urpf_mode_t.URPF_API_MODE_STRICT,
@@ -149,7 +152,8 @@
self.send_and_expect(self.pg0, p_spoof_strict, self.pg1)
self.send_and_assert_no_replies(self.pg0, p_spoof_loose)
- self.assert_error_counter_equal("ip4-tx-urpf-strict", N_PKTS)
+ self.assert_error_counter_equal("/err/ip4-tx-urpf-strict/uRPF Drop",
+ N_PKTS)
# change the strict packet so that it would forward through pg1
p_spoof_strict = (Ether(dst=self.pg0.local_mac,
@@ -160,7 +164,8 @@
Raw(b'\xa5' * 100)) * N_PKTS
self.send_and_assert_no_replies(self.pg0, p_spoof_strict)
- self.assert_error_counter_equal("ip4-tx-urpf-strict", 2 * N_PKTS)
+ self.assert_error_counter_equal("/err/ip4-tx-urpf-strict/uRPF Drop",
+ 2 * N_PKTS)
# cleanup
self.vapi.urpf_update(is_input=False,
@@ -212,7 +217,8 @@
# packets from address to which there is no route are dropped
self.send_and_assert_no_replies(self.pg0, p_spoof_loose)
- self.assert_error_counter_equal("ip6-rx-urpf-loose", N_PKTS)
+ self.assert_error_counter_equal("/err/ip6-rx-urpf-loose/uRPF Drop",
+ N_PKTS)
#
# crank it up to strict mode
@@ -228,7 +234,8 @@
self.send_and_assert_no_replies(self.pg0, p_spoof_strict)
self.send_and_assert_no_replies(self.pg0, p_spoof_loose)
- self.assert_error_counter_equal("ip6-rx-urpf-strict", 2 * N_PKTS)
+ self.assert_error_counter_equal("/err/ip6-rx-urpf-strict/uRPF Drop",
+ 2 * N_PKTS)
#
# disable uRPF, all traffic should pass
@@ -258,7 +265,8 @@
self.send_and_expect(self.pg0, p_spoof_strict, self.pg1)
self.send_and_assert_no_replies(self.pg0, p_spoof_loose)
- self.assert_error_counter_equal("ip6-tx-urpf-loose", N_PKTS)
+ self.assert_error_counter_equal("/err/ip6-tx-urpf-loose/uRPF Drop",
+ N_PKTS)
self.vapi.urpf_update(is_input=False,
mode=e.vl_api_urpf_mode_t.URPF_API_MODE_STRICT,
@@ -271,7 +279,8 @@
self.send_and_expect(self.pg0, p_spoof_strict, self.pg1)
self.send_and_assert_no_replies(self.pg0, p_spoof_loose)
- self.assert_error_counter_equal("ip6-tx-urpf-strict", N_PKTS)
+ self.assert_error_counter_equal("/err/ip6-tx-urpf-strict/uRPF Drop",
+ N_PKTS)
# change the strict packet so that it would forward through pg1
p_spoof_strict = (Ether(dst=self.pg0.local_mac,
@@ -282,7 +291,8 @@
Raw(b'\xa5' * 100)) * N_PKTS
self.send_and_assert_no_replies(self.pg0, p_spoof_strict)
- self.assert_error_counter_equal("ip6-tx-urpf-strict", 2 * N_PKTS)
+ self.assert_error_counter_equal("/err/ip6-tx-urpf-strict/uRPF Drop",
+ 2 * N_PKTS)
# cleanup
self.vapi.urpf_update(is_input=False,