#!/usr/bin/env python3
# Copyright (c) 2021 Graphiant, Inc.

import unittest
from scapy.layers.inet import IP, UDP
from scapy.layers.l2 import Ether
from scapy.packet import Raw
from framework import VppTestCase
from asfframework import VppTestRunner
from vpp_papi import VppEnum
from vpp_policer import VppPolicer, PolicerAction, Dir

NUM_PKTS = 67


class TestPolicerInput(VppTestCase):
    """Policer on an interface"""

    vpp_worker_count = 2

    def setUp(self):
        super(TestPolicerInput, self).setUp()

        self.create_pg_interfaces(range(2))
        for i in self.pg_interfaces:
            i.admin_up()
            i.config_ip4()
            i.resolve_arp()

        self.pkt = (
            Ether(src=self.pg0.remote_mac, dst=self.pg0.local_mac)
            / IP(src=self.pg0.remote_ip4, dst=self.pg1.remote_ip4)
            / UDP(sport=1234, dport=1234)
            / Raw(b"\xa5" * 100)
        )

    def tearDown(self):
        for i in self.pg_interfaces:
            i.unconfig_ip4()
            i.admin_down()
        super(TestPolicerInput, self).tearDown()

    def policer_interface_test(self, dir: Dir):
        pkts = self.pkt * NUM_PKTS

        action_tx = PolicerAction(
            VppEnum.vl_api_sse2_qos_action_type_t.SSE2_QOS_ACTION_API_TRANSMIT, 0
        )
        policer = VppPolicer(
            self,
            "pol1",
            80,
            0,
            1000,
            0,
            conform_action=action_tx,
            exceed_action=action_tx,
            violate_action=action_tx,
        )
        policer.add_vpp_config()

        sw_if_index = self.pg0.sw_if_index if dir == Dir.RX else self.pg1.sw_if_index

        # Start policing on pg0
        policer.apply_vpp_config(sw_if_index, dir, True)

        rx = self.send_and_expect(self.pg0, pkts, self.pg1, worker=0)
        stats = policer.get_stats()

        # Single rate, 2 colour policer - expect conform, violate but no exceed
        self.assertGreater(stats["conform_packets"], 0)
        self.assertEqual(stats["exceed_packets"], 0)
        self.assertGreater(stats["violate_packets"], 0)

        # Stop policing on pg0
        policer.apply_vpp_config(sw_if_index, dir, False)

        rx = self.send_and_expect(self.pg0, pkts, self.pg1, worker=0)

        statsnew = policer.get_stats()

        # No new packets counted
        self.assertEqual(stats, statsnew)

        policer.remove_vpp_config()

    def test_policer_input(self):
        """Input Policing"""
        self.policer_interface_test(Dir.RX)

    def test_policer_output(self):
        """Output Policing"""
        self.policer_interface_test(Dir.TX)

    def test_policer_reset(self):
        """Policer reset bucket"""
        pkts = self.pkt * NUM_PKTS

        action_tx = PolicerAction(
            VppEnum.vl_api_sse2_qos_action_type_t.SSE2_QOS_ACTION_API_TRANSMIT, 0
        )
        policer = VppPolicer(
            self,
            "pol1",
            1,
            0,
            10000,
            0,
            conform_action=action_tx,
            exceed_action=action_tx,
            violate_action=action_tx,
        )
        policer.add_vpp_config()

        # Start policing on pg0
        policer.apply_vpp_config(self.pg0.sw_if_index, Dir.RX, True)

        self.send_and_expect(self.pg0, pkts, self.pg1, worker=0)
        details = policer.get_details()

        self.assertGreater(details.current_limit, details.current_bucket)

        self.send_and_expect(self.pg0, pkts, self.pg1, worker=0)
        self.vapi.policer_reset(policer_index=policer.policer_index)
        details = policer.get_details()

        self.assertEqual(details.current_limit, details.current_bucket)

        policer.apply_vpp_config(self.pg0.sw_if_index, Dir.RX, False)

        policer.remove_vpp_config()

    def test_policer_update(self):
        """Policer update"""
        pkts = self.pkt * NUM_PKTS

        action_tx = PolicerAction(
            VppEnum.vl_api_sse2_qos_action_type_t.SSE2_QOS_ACTION_API_TRANSMIT, 0
        )
        policer = VppPolicer(
            self,
            "pol1",
            1,
            0,
            10000,
            0,
            conform_action=action_tx,
            exceed_action=action_tx,
            violate_action=action_tx,
        )
        policer.add_vpp_config()

        # Start policing on pg0
        policer.apply_vpp_config(self.pg0.sw_if_index, Dir.RX, True)

        self.send_and_expect(self.pg0, pkts, self.pg1, worker=0)
        details_before = policer.get_details()

        self.assertGreater(details_before.current_limit, details_before.current_bucket)

        policer.cir = 8000
        policer.commited_burst = 100000
        policer.update()

        details_after = policer.get_details()

        self.assertGreater(details_after.cir, details_before.cir)
        self.assertGreater(details_after.cb, details_before.cb)

        policer.apply_vpp_config(self.pg0.sw_if_index, Dir.RX, False)

        policer.remove_vpp_config()

    def policer_handoff_test(self, dir: Dir):
        pkts = self.pkt * NUM_PKTS

        action_tx = PolicerAction(
            VppEnum.vl_api_sse2_qos_action_type_t.SSE2_QOS_ACTION_API_TRANSMIT, 0
        )
        policer = VppPolicer(
            self,
            "pol2",
            80,
            0,
            1000,
            0,
            conform_action=action_tx,
            exceed_action=action_tx,
            violate_action=action_tx,
        )
        policer.add_vpp_config()

        sw_if_index = self.pg0.sw_if_index if dir == Dir.RX else self.pg1.sw_if_index

        # Bind the policer to worker 1
        policer.bind_vpp_config(1, True)

        # Start policing on pg0
        policer.apply_vpp_config(sw_if_index, dir, True)

        for worker in [0, 1]:
            self.send_and_expect(self.pg0, pkts, self.pg1, worker=worker)
            self.logger.debug(self.vapi.cli("show trace max 100"))

        stats = policer.get_stats()
        stats0 = policer.get_stats(worker=0)
        stats1 = policer.get_stats(worker=1)

        # Worker 1, should have done all the policing
        self.assertEqual(stats, stats1)

        # Worker 0, should have handed everything off
        self.assertEqual(stats0["conform_packets"], 0)
        self.assertEqual(stats0["exceed_packets"], 0)
        self.assertEqual(stats0["violate_packets"], 0)

        # Unbind the policer from worker 1 and repeat
        policer.bind_vpp_config(1, False)
        for worker in [0, 1]:
            self.send_and_expect(self.pg0, pkts, self.pg1, worker=worker)
            self.logger.debug(self.vapi.cli("show trace max 100"))

        # The policer should auto-bind to worker 0 when packets arrive
        stats = policer.get_stats()

        # The 2 workers should now have policed the same amount
        stats = policer.get_stats()
        stats0 = policer.get_stats(worker=0)
        stats1 = policer.get_stats(worker=1)

        self.assertGreater(stats0["conform_packets"], 0)
        self.assertEqual(stats0["exceed_packets"], 0)
        self.assertGreater(stats0["violate_packets"], 0)

        self.assertGreater(stats1["conform_packets"], 0)
        self.assertEqual(stats1["exceed_packets"], 0)
        self.assertGreater(stats1["violate_packets"], 0)

        self.assertEqual(
            stats0["conform_packets"] + stats1["conform_packets"],
            stats["conform_packets"],
        )

        self.assertEqual(
            stats0["violate_packets"] + stats1["violate_packets"],
            stats["violate_packets"],
        )

        # Stop policing on pg0
        policer.apply_vpp_config(sw_if_index, dir, False)

        policer.remove_vpp_config()

    def test_policer_handoff_input(self):
        """Worker thread handoff policer input"""
        self.policer_handoff_test(Dir.RX)

    def test_policer_handoff_output(self):
        """Worker thread handoff policer output"""
        self.policer_handoff_test(Dir.TX)


if __name__ == "__main__":
    unittest.main(testRunner=VppTestRunner)