l2: L2/L3 mode swicth cleanup and l2-patch fix

Cleanup L2/L3 mode switch to not redirect to/from ethernet-input node
as it is no longer necessary.
L2 patch should use sw_if_index for device feature enable/disable.

Type: fix

Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I0f24161d027b07c188fd1e05276146f94c075710
diff --git a/src/vnet/bonding/cli.c b/src/vnet/bonding/cli.c
index d9a6408..92a9ff0 100644
--- a/src/vnet/bonding/cli.c
+++ b/src/vnet/bonding/cli.c
@@ -727,12 +727,11 @@
   bond_slave_add_del_mac_addrs (bif, sif->sw_if_index, 1 /* is_add */ );
 
   if (bif_hw->l2_if_count)
-    {
-      ethernet_set_flags (vnm, sif_hw->hw_if_index,
-			  ETHERNET_INTERFACE_FLAG_ACCEPT_ALL);
-      /* ensure all packets go to ethernet-input */
-      ethernet_set_rx_redirect (vnm, sif_hw, 1);
-    }
+    ethernet_set_flags (vnm, sif_hw->hw_if_index,
+			ETHERNET_INTERFACE_FLAG_ACCEPT_ALL);
+  else
+    ethernet_set_flags (vnm, sif_hw->hw_if_index,
+			/*ETHERNET_INTERFACE_FLAG_DEFAULT_L3 */ 0);
 
   if (bif->mode == BOND_MODE_LACP)
     {
diff --git a/src/vnet/bonding/device.c b/src/vnet/bonding/device.c
index 550321b..b3069fe 100644
--- a/src/vnet/bonding/device.c
+++ b/src/vnet/bonding/device.c
@@ -99,9 +99,6 @@
 	sif_hw = vnet_get_sup_hw_interface (vnm, *sw_if_index);
 	ethernet_set_flags (vnm, sif_hw->hw_if_index,
 			    ETHERNET_INTERFACE_FLAG_ACCEPT_ALL);
-
-	/* ensure all packets go to ethernet-input */
-	ethernet_set_rx_redirect (vnm, sif_hw, 1);
       }
     }
   else if ((bif_hw->l2_if_count == 0) && (l2_if_adjust == -1))
@@ -110,9 +107,8 @@
       vec_foreach (sw_if_index, bif->slaves)
       {
 	sif_hw = vnet_get_sup_hw_interface (vnm, *sw_if_index);
-
-	/* Allow ip packets to go directly to ip4-input etc */
-	ethernet_set_rx_redirect (vnm, sif_hw, 0);
+	ethernet_set_flags (vnm, sif_hw->hw_if_index,
+			    /*ETHERNET_INTERFACE_FLAG_DEFAULT_L3 */ 0);
       }
     }
 
diff --git a/src/vnet/l2/l2_input.c b/src/vnet/l2/l2_input.c
index 7b93fba..8a7ab80 100644
--- a/src/vnet/l2/l2_input.c
+++ b/src/vnet/l2/l2_input.c
@@ -800,9 +800,6 @@
 	  config->feature_bitmap &=
 	    ~(L2INPUT_FEAT_LEARN | L2INPUT_FEAT_FWD | L2INPUT_FEAT_FLOOD);
 	  shg = 0;		/* not used in xconnect */
-
-	  /* Insure all packets go to ethernet-input */
-	  ethernet_set_rx_redirect (vnet_main, hi, 1);
 	}
 
       /* set up split-horizon group and set output feature bit */
@@ -827,25 +824,18 @@
     {
       if ((hi->l2_if_count == 1) && (l2_if_adjust == 1))
 	{
-	  /* Just added first L2 interface on this port */
-
-	  /* Set promiscuous mode on the l2 interface */
+	  /* Just added first L2 interface on this port
+	   * Set promiscuous mode on the l2 interface */
 	  ethernet_set_flags (vnet_main, hi->hw_if_index,
 			      ETHERNET_INTERFACE_FLAG_ACCEPT_ALL);
-
-	  /* ensure all packets go to ethernet-input */
-	  ethernet_set_rx_redirect (vnet_main, hi, 1);
-
 	}
       else if ((hi->l2_if_count == 0) && (l2_if_adjust == -1))
 	{
-	  /* Just removed only L2 subinterface on this port */
+	  /* Just removed only L2 subinterface on this port
+	   * Disable promiscuous mode on the l2 interface */
+	  ethernet_set_flags (vnet_main, hi->hw_if_index,
+			      /*ETHERNET_INTERFACE_FLAG_DEFAULT_L3 */ 0);
 
-	  /* Disable promiscuous mode on the l2 interface */
-	  ethernet_set_flags (vnet_main, hi->hw_if_index, 0);
-
-	  /* Allow ip packets to go directly to ip4-input etc */
-	  ethernet_set_rx_redirect (vnet_main, hi, 0);
 	}
     }
 
diff --git a/src/vnet/l2/l2_patch.c b/src/vnet/l2/l2_patch.c
index fb8849d..618ae20 100644
--- a/src/vnet/l2/l2_patch.c
+++ b/src/vnet/l2/l2_patch.c
@@ -270,15 +270,15 @@
 			  ETHERNET_INTERFACE_FLAG_ACCEPT_ALL);
 
       vnet_feature_enable_disable ("device-input", "l2-patch",
-				   rxhi->hw_if_index, 1, 0, 0);
+				   rxhi->sw_if_index, 1, 0, 0);
     }
   else
     {
       ethernet_set_flags (l2pm->vnet_main, rxhi->hw_if_index,
-			  0 /* disable promiscuous mode */ );
+			  /*ETHERNET_INTERFACE_FLAG_DEFAULT_L3 */ 0);
 
       vnet_feature_enable_disable ("device-input", "l2-patch",
-				   rxhi->hw_if_index, 0, 0, 0);
+				   rxhi->sw_if_index, 0, 0, 0);
       if (vec_len (l2pm->tx_next_by_rx_sw_if_index) > rx_sw_if_index)
 	{
 	  l2pm->tx_next_by_rx_sw_if_index[rx_sw_if_index] = ~0;