diff --git a/test/test_ip6.py b/test/test_ip6.py
index 38808a9..92bb350 100644
--- a/test/test_ip6.py
+++ b/test/test_ip6.py
@@ -1,250 +1,126 @@
 #!/usr/bin/env python
 
-import logging
-logging.getLogger("scapy.runtime").setLevel(logging.ERROR)
-
 import unittest
+import socket
+from logging import *
+
 from framework import VppTestCase, VppTestRunner
-from util import Util
+from vpp_sub_interface import VppSubInterface, VppDot1QSubint, VppDot1ADSubint
 
 from scapy.packet import Raw
 from scapy.layers.l2 import Ether, Dot1Q
-from scapy.layers.inet6 import (IPv6, UDP,
-    ICMPv6ND_NS, ICMPv6NDOptSrcLLAddr,
-    ICMPv6ND_NA, ICMPv6NDOptDstLLAddr)
+from scapy.layers.inet6 import ICMPv6ND_NS, IPv6, UDP
 
 
-@unittest.skip('Not finished yet.\n')
-class TestIPv6(Util, VppTestCase):
+class TestIPv6(VppTestCase):
     """ IPv6 Test Case """
 
     @classmethod
     def setUpClass(cls):
         super(TestIPv6, cls).setUpClass()
 
-        try:
-            cls.create_interfaces_and_subinterfaces()
+    def setUp(self):
+        super(TestIPv6, self).setUp()
 
-            # configure IPv6 on hardware interfaces
-            cls.config_ip6(cls.interfaces)
+        # create 3 pg interfaces
+        self.create_pg_interfaces(range(3))
 
-            cls.config_ip6_on_software_interfaces(cls.interfaces)
+        # create 2 subinterfaces for p1 and pg2
+        self.sub_interfaces = [
+            VppDot1QSubint(self, self.pg1, 100),
+            VppDot1QSubint(self, self.pg2, 200)]
+            # TODO: VppDot1ADSubint(self, self.pg2, 200, 300, 400)
 
-            # resolve ICMPv6 ND using hardware interfaces
-            cls.resolve_icmpv6_nd(cls.interfaces)
+        # packet flows mapping pg0 -> pg1.sub, pg2.sub, etc.
+        self.flows = dict()
+        self.flows[self.pg0] = [self.pg1.sub_if, self.pg2.sub_if]
+        self.flows[self.pg1.sub_if] = [self.pg0, self.pg2.sub_if]
+        self.flows[self.pg2.sub_if] = [self.pg0, self.pg1.sub_if]
 
-            # let VPP know MAC addresses of peer (sub)interfaces
-            # cls.resolve_icmpv6_nd_on_software_interfaces(cls.interfaces)
-            cls.send_neighbour_advertisement_on_software_interfaces(cls.interfaces)
+        # packet sizes
+        self.pg_if_packet_sizes = [64, 512, 1518, 9018]
+        self.sub_if_packet_sizes = [64, 512, 1518 + 4, 9018 + 4]
 
-            # config 2M FIB enries
-            #cls.config_fib_entries(2000000)
-            cls.config_fib_entries(1000000)
+        self.interfaces = list(self.pg_interfaces)
+        self.interfaces.extend(self.sub_interfaces)
 
-        except Exception as e:
-            super(TestIPv6, cls).tearDownClass()
-            raise
+        # setup all interfaces
+        for i in self.interfaces:
+            i.admin_up()
+            i.config_ip6()
+            i.resolve_ndp()
+
+        # config 2M FIB enries
+        self.config_fib_entries(200)
 
     def tearDown(self):
-        self.cli(2, "show int")
-        self.cli(2, "show trace")
-        self.cli(2, "show hardware")
-        self.cli(2, "show ip arp")
-        # self.cli(2, "show ip fib")  # 2M entries
-        self.cli(2, "show error")
-        self.cli(2, "show run")
+        super(TestIPv6, self).tearDown()
+        if not self.vpp_dead:
+            info(self.vapi.cli("show ip6 neighbors"))
+            # info(self.vapi.cli("show ip6 fib"))  # many entries
 
-    @classmethod
-    def create_vlan_subif(cls, pg_index, vlan):
-        cls.api("create_vlan_subif pg%u vlan %u" % (pg_index, vlan))
+    def config_fib_entries(self, count):
+        n_int = len(self.interfaces)
+        percent = 0
+        counter = 0.0
+        dest_addr = socket.inet_pton(socket.AF_INET6, "fd02::1")
+        dest_addr_len = 128
+        for i in self.interfaces:
+            next_hop_address = i.local_ip6n
+            for j in range(count / n_int):
+                self.vapi.ip_add_del_route(
+                    dest_addr, dest_addr_len, next_hop_address, is_ipv6=1)
+                counter = counter + 1
+                if counter / count * 100 > percent:
+                    info("Configure %d FIB entries .. %d%% done" %
+                         (count, percent))
+                    percent = percent + 1
 
-    @classmethod
-    def create_dot1ad_subif(cls, pg_index, sub_id, outer_vlan_id, inner_vlan_id):
-        cls.api("create_subif pg%u sub_id %u outer_vlan_id %u inner_vlan_id %u dot1ad"
-                 % (pg_index, sub_id, outer_vlan_id, inner_vlan_id))
-
-    class SoftInt(object):
-        pass
-
-    class HardInt(SoftInt):
-        pass
-
-    class Subint(SoftInt):
-        def __init__(self, sub_id):
-            self.sub_id = sub_id
-
-    class Dot1QSubint(Subint):
-        def __init__(self, sub_id, vlan=None):
-            if vlan is None:
-                vlan = sub_id
-            super(TestIPv6.Dot1QSubint, self).__init__(sub_id)
-            self.vlan = vlan
-
-    class Dot1ADSubint(Subint):
-        def __init__(self, sub_id, outer_vlan, inner_vlan):
-            super(TestIPv6.Dot1ADSubint, self).__init__(sub_id)
-            self.outer_vlan = outer_vlan
-            self.inner_vlan = inner_vlan
-
-    @classmethod
-    def create_interfaces_and_subinterfaces(cls):
-        cls.interfaces = range(3)
-
-        cls.create_interfaces(cls.interfaces)
-
-        # Make vpp_api_test see interfaces created using debug CLI (in function create_interfaces)
-        cls.api("sw_interface_dump")
-
-        cls.INT_DETAILS = dict()
-
-        cls.INT_DETAILS[0] = cls.HardInt()
-
-        cls.INT_DETAILS[1] = cls.Dot1QSubint(100)
-        cls.create_vlan_subif(1, cls.INT_DETAILS[1].vlan)
-
-        # FIXME: Wrong packet format/wrong layer on output of interface 2
-        #self.INT_DETAILS[2] = self.Dot1ADSubint(10, 200, 300)
-        #self.create_dot1ad_subif(2, self.INT_DETAILS[2].sub_id, self.INT_DETAILS[2].outer_vlan, self.INT_DETAILS[2].inner_vlan)
-
-        # Use dor1q for now
-        cls.INT_DETAILS[2] = cls.Dot1QSubint(200)
-        cls.create_vlan_subif(2, cls.INT_DETAILS[2].vlan)
-
-        for i in cls.interfaces:
-            det = cls.INT_DETAILS[i]
-            if isinstance(det, cls.Subint):
-                cls.api("sw_interface_set_flags pg%u.%u admin-up" % (i, det.sub_id))
-
-    # IP adresses on subinterfaces
-    MY_SOFT_IP6S = {}
-    VPP_SOFT_IP6S = {}
-
-    @classmethod
-    def config_ip6_on_software_interfaces(cls, args):
-        for i in args:
-            cls.MY_SOFT_IP6S[i] = "fd01:%u::2" % i
-            cls.VPP_SOFT_IP6S[i] = "fd01:%u::1" % i
-            if isinstance(cls.INT_DETAILS[i], cls.Subint):
-                interface = "pg%u.%u" % (i, cls.INT_DETAILS[i].sub_id)
-            else:
-                interface = "pg%u" % i
-            cls.api("sw_interface_add_del_address %s %s/32" % (interface, cls.VPP_SOFT_IP6S[i]))
-            cls.log("My subinterface IPv6 address is %s" % (cls.MY_SOFT_IP6S[i]))
-
-    # let VPP know MAC addresses of peer (sub)interfaces
-    @classmethod
-    def resolve_icmpv6_nd_on_software_interfaces(cls, args):
-        for i in args:
-            ip = cls.VPP_SOFT_IP6S[i]
-            cls.log("Sending ICMPv6ND_NS request for %s on port %u" % (ip, i))
-            nd_req = (Ether(dst="ff:ff:ff:ff:ff:ff", src=cls.MY_MACS[i]) /
-                      IPv6(src=cls.MY_SOFT_IP6S[i], dst=ip) /
-                      ICMPv6ND_NS(tgt=ip) /
-                      ICMPv6NDOptSrcLLAddr(lladdr=cls.MY_MACS[i]))
-            cls.pg_add_stream(i, nd_req)
-            cls.pg_enable_capture([i])
-
-            cls.cli(2, "trace add pg-input 1")
-            cls.pg_start()
-
-            # We don't need to read output
-
-    # let VPP know MAC addresses of peer (sub)interfaces
-    @classmethod
-    def send_neighbour_advertisement_on_software_interfaces(cls, args):
-        for i in args:
-            ip = cls.VPP_SOFT_IP6S[i]
-            cls.log("Sending ICMPv6ND_NA message for %s on port %u" % (ip, i))
-            pkt = (Ether(dst="ff:ff:ff:ff:ff:ff", src=cls.MY_MACS[i]) /
-                   IPv6(src=cls.MY_SOFT_IP6S[i], dst=ip) /
-                   ICMPv6ND_NA(tgt=ip, R=0, S=0) /
-                   ICMPv6NDOptDstLLAddr(lladdr=cls.MY_MACS[i]))
-            cls.pg_add_stream(i, pkt)
-            cls.pg_enable_capture([i])
-
-            cls.cli(2, "trace add pg-input 1")
-            cls.pg_start()
-
-    @classmethod
-    def config_fib_entries(cls, count):
-        n_int = len(cls.interfaces)
-        for i in cls.interfaces:
-            cls.api("ip_add_del_route fd02::1/128 via %s count %u" % (cls.VPP_SOFT_IP6S[i], count / n_int))
-
-    @classmethod
-    def add_dot1_layers(cls, i, packet):
-        assert(type(packet) is Ether)
-        payload = packet.payload
-        det = cls.INT_DETAILS[i]
-        if isinstance(det, cls.Dot1QSubint):
-            packet.remove_payload()
-            packet.add_payload(Dot1Q(vlan=det.sub_id) / payload)
-        elif isinstance(det, cls.Dot1ADSubint):
-            packet.remove_payload()
-            packet.add_payload(Dot1Q(vlan=det.outer_vlan) / Dot1Q(vlan=det.inner_vlan) / payload)
-            packet.type = 0x88A8
-
-    def remove_dot1_layers(self, i, packet):
-        self.assertEqual(type(packet), Ether)
-        payload = packet.payload
-        det = self.INT_DETAILS[i]
-        if isinstance(det, self.Dot1QSubint):
-            self.assertEqual(type(payload), Dot1Q)
-            self.assertEqual(payload.vlan, self.INT_DETAILS[i].vlan)
-            payload = payload.payload
-        elif isinstance(det, self.Dot1ADSubint):  # TODO: change 88A8 type
-            self.assertEqual(type(payload), Dot1Q)
-            self.assertEqual(payload.vlan, self.INT_DETAILS[i].outer_vlan)
-            payload = payload.payload
-            self.assertEqual(type(payload), Dot1Q)
-            self.assertEqual(payload.vlan, self.INT_DETAILS[i].inner_vlan)
-            payload = payload.payload
-        packet.remove_payload()
-        packet.add_payload(payload)
-
-    def create_stream(self, pg_id):
-        pg_targets = [None] * 3
-        pg_targets[0] = [1, 2]
-        pg_targets[1] = [0, 2]
-        pg_targets[2] = [0, 1]
+    def create_stream(self, src_if, packet_sizes):
         pkts = []
         for i in range(0, 257):
-            target_pg_id = pg_targets[pg_id][i % 2]
-            info = self.create_packet_info(pg_id, target_pg_id)
+            dst_if = self.flows[src_if][i % 2]
+            info = self.create_packet_info(
+                src_if.sw_if_index, dst_if.sw_if_index)
             payload = self.info_to_payload(info)
-            p = (Ether(dst=self.VPP_MACS[pg_id], src=self.MY_MACS[pg_id]) /
-                 IPv6(src=self.MY_SOFT_IP6S[pg_id], dst=self.MY_SOFT_IP6S[target_pg_id]) /
+            p = (Ether(dst=src_if.local_mac, src=src_if.remote_mac) /
+                 IPv6(src=src_if.remote_ip6, dst=dst_if.remote_ip6) /
                  UDP(sport=1234, dport=1234) /
                  Raw(payload))
             info.data = p.copy()
-            self.add_dot1_layers(pg_id, p)
-            if not isinstance(self.INT_DETAILS[pg_id], self.Subint):
-                packet_sizes = [76, 512, 1518, 9018]
-            else:
-                packet_sizes = [76, 512, 1518+4, 9018+4]
-            size = packet_sizes[(i / 2) % len(packet_sizes)]
+            if isinstance(src_if, VppSubInterface):
+                p = src_if.add_dot1_layer(p)
+            size = packet_sizes[(i // 2) % len(packet_sizes)]
             self.extend_packet(p, size)
             pkts.append(p)
         return pkts
 
-    def verify_capture(self, o, capture):
-        last_info = {}
+    def verify_capture(self, dst_if, capture):
+        info("Verifying capture on interface %s" % dst_if.name)
+        last_info = dict()
         for i in self.interfaces:
-            last_info[i] = None
+            last_info[i.sw_if_index] = None
+        is_sub_if = False
+        dst_sw_if_index = dst_if.sw_if_index
+        if hasattr(dst_if, 'parent'):
+            is_sub_if = True
         for packet in capture:
-            self.remove_dot1_layers(o, packet)  # Check VLAN tags and Ethernet header
+            if is_sub_if:
+                # Check VLAN tags and Ethernet header
+                packet = dst_if.remove_dot1_layer(packet)
             self.assertTrue(Dot1Q not in packet)
             try:
                 ip = packet[IPv6]
                 udp = packet[UDP]
                 payload_info = self.payload_to_info(str(packet[Raw]))
                 packet_index = payload_info.index
-                src_pg = payload_info.src
-                dst_pg = payload_info.dst
-                self.assertEqual(dst_pg, o)
-                self.log("Got packet on port %u: src=%u (id=%u)" % (o, src_pg, packet_index), 2)
-                next_info = self.get_next_packet_info_for_interface2(src_pg, dst_pg, last_info[src_pg])
-                last_info[src_pg] = next_info
+                self.assertEqual(payload_info.dst, dst_sw_if_index)
+                debug("Got packet on port %s: src=%u (id=%u)" %
+                      (dst_if.name, payload_info.src, packet_index))
+                next_info = self.get_next_packet_info_for_interface2(
+                    payload_info.src, dst_sw_if_index,
+                    last_info[payload_info.src])
+                last_info[payload_info.src] = next_info
                 self.assertTrue(next_info is not None)
                 self.assertEqual(packet_index, next_info.index)
                 saved_packet = next_info.data
@@ -254,28 +130,37 @@
                 self.assertEqual(udp.sport, saved_packet[UDP].sport)
                 self.assertEqual(udp.dport, saved_packet[UDP].dport)
             except:
-                self.log("Unexpected or invalid packet:")
-                packet.show()
+                error("Unexpected or invalid packet:")
+                error(packet.show())
                 raise
         for i in self.interfaces:
-            remaining_packet = self.get_next_packet_info_for_interface2(i, o, last_info[i])
-            self.assertTrue(remaining_packet is None, "Port %u: Packet expected from source %u didn't arrive" % (o, i))
+            remaining_packet = self.get_next_packet_info_for_interface2(
+                i.sw_if_index, dst_sw_if_index, last_info[i.sw_if_index])
+            self.assertTrue(
+                remaining_packet is None,
+                "Interface %s: Packet expected from interface %s didn't arrive" %
+                (dst_if.name, i.name))
 
     def test_fib(self):
         """ IPv6 FIB test """
 
-        for i in self.interfaces:
-            pkts = self.create_stream(i)
-            self.pg_add_stream(i, pkts)
+        pkts = self.create_stream(self.pg0, self.pg_if_packet_sizes)
+        self.pg0.add_stream(pkts)
 
-        self.pg_enable_capture(self.interfaces)
+        for i in self.sub_interfaces:
+            pkts = self.create_stream(i, self.sub_if_packet_sizes)
+            i.parent.add_stream(pkts)
+
+        self.pg_enable_capture(self.pg_interfaces)
         self.pg_start()
 
-        for i in self.interfaces:
-            out = self.pg_get_capture(i)
-            self.log("Verifying capture %u" % i)
-            self.verify_capture(i, out)
+        pkts = self.pg0.get_capture()
+        self.verify_capture(self.pg0, pkts)
+
+        for i in self.sub_interfaces:
+            pkts = i.parent.get_capture()
+            self.verify_capture(i, pkts)
 
 
 if __name__ == '__main__':
-    unittest.main(testRunner = VppTestRunner)
+    unittest.main(testRunner=VppTestRunner)