src/vnet/api_errno.h

/*
 * Copyright (c) 2015 Cisco and/or its affiliates.
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at:
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#ifndef included_vnet_api_errno_h
#define included_vnet_api_errno_h

#include <stdarg.h>
#include <vppinfra/types.h>
#include <vppinfra/format.h>

#define foreach_vnet_api_error						\
_(UNSPECIFIED, -1, "Unspecified Error")                                 \
_(INVALID_SW_IF_INDEX, -2, "Invalid sw_if_index")                       \
_(NO_SUCH_FIB, -3, "No such FIB / VRF")                                 \
_(NO_SUCH_INNER_FIB, -4, "No such inner FIB / VRF")                     \
_(NO_SUCH_LABEL, -5, "No such label")                                   \
_(NO_SUCH_ENTRY, -6, "No such entry")                                   \
_(INVALID_VALUE, -7, "Invalid value")                                   \
_(INVALID_VALUE_2, -8, "Invalid value #2")                              \
_(UNIMPLEMENTED, -9, "Unimplemented")                                   \
_(INVALID_SW_IF_INDEX_2, -10, "Invalid sw_if_index #2")                 \
_(SYSCALL_ERROR_1, -11, "System call error #1")                         \
_(SYSCALL_ERROR_2, -12, "System call error #2")                         \
_(SYSCALL_ERROR_3, -13, "System call error #3")                         \
_(SYSCALL_ERROR_4, -14, "System call error #4")                         \
_(SYSCALL_ERROR_5, -15, "System call error #5")                         \
_(SYSCALL_ERROR_6, -16, "System call error #6")                         \
_(SYSCALL_ERROR_7, -17, "System call error #7")                         \
_(SYSCALL_ERROR_8, -18, "System call error #8")                         \
_(SYSCALL_ERROR_9, -19, "System call error #9")                         \
_(SYSCALL_ERROR_10, -20, "System call error #10")                       \
_(FEATURE_DISABLED, -30, "Feature disabled by configuration")           \
_(INVALID_REGISTRATION, -31, "Invalid registration")                    \
_(NEXT_HOP_NOT_IN_FIB, -50, "Next hop not in FIB")                      \
_(UNKNOWN_DESTINATION, -51, "Unknown destination")                      \
_(NO_PATHS_IN_ROUTE, -52, "No paths specified in route")                \
_(NEXT_HOP_NOT_FOUND_MP, -53, "Next hop not found (multipath)")         \
_(NO_MATCHING_INTERFACE, -54, "No matching interface for probe")        \
_(INVALID_VLAN, -55, "Invalid VLAN")                                    \
_(VLAN_ALREADY_EXISTS, -56, "VLAN subif already exists")                \
_(INVALID_SRC_ADDRESS, -57, "Invalid src address")                      \
_(INVALID_DST_ADDRESS, -58, "Invalid dst address")                      \
_(ADDRESS_LENGTH_MISMATCH, -59, "Address length mismatch")              \
_(ADDRESS_NOT_FOUND_FOR_INTERFACE, -60, "Address not found for interface") \
_(ADDRESS_NOT_DELETABLE, -61, "Address not deletable")                  \
_(IP6_NOT_ENABLED, -62, "ip6 not enabled")				\
_(NO_SUCH_NODE, -63, "No such graph node")				\
_(NO_SUCH_NODE2, -64, "No such graph node #2")				\
_(NO_SUCH_TABLE, -65, "No such table")                                  \
_(NO_SUCH_TABLE2, -66, "No such table #2")                              \
_(NO_SUCH_TABLE3, -67, "No such table #3")                              \
_(SUBIF_ALREADY_EXISTS, -68, "Subinterface already exists")             \
_(SUBIF_CREATE_FAILED, -69, "Subinterface creation failed")		\
_(INVALID_MEMORY_SIZE, -70, "Invalid memory size requested")            \
_(INVALID_INTERFACE, -71, "Invalid interface")                          \
_(INVALID_VLAN_TAG_COUNT, -72, "Invalid number of tags for requested operation") \
_(INVALID_ARGUMENT, -73, "Invalid argument")                            \
_(UNEXPECTED_INTF_STATE, -74, "Unexpected interface state")             \
_(TUNNEL_EXIST, -75, "Tunnel already exists")                           \
_(INVALID_DECAP_NEXT, -76, "Invalid decap-next")			\
_(RESPONSE_NOT_READY, -77, "Response not ready")			\
_(NOT_CONNECTED, -78, "Not connected to the data plane")                \
_(IF_ALREADY_EXISTS, -79, "Interface already exists")                   \
_(BOND_SLAVE_NOT_ALLOWED, -80, "Operation not allowed on slave of BondEthernet") \
_(VALUE_EXIST, -81, "Value already exists")                             \
_(SAME_SRC_DST, -82, "Source and destination are the same")             \
_(IP6_MULTICAST_ADDRESS_NOT_PRESENT, -83, "IP6 multicast address required") \
_(SR_POLICY_NAME_NOT_PRESENT, -84, "Segment routing policy name required") \
_(NOT_RUNNING_AS_ROOT, -85, "Not running as root") \
_(ALREADY_CONNECTED, -86, "Connection to the data plane already exists") \
_(UNSUPPORTED_JNI_VERSION, -87, "Unsupported JNI version") \
_(IP_PREFIX_INVALID, -88, "IP prefix invalid (masked bits set in address") \
_(INVALID_WORKER, -89, "Invalid worker thread")                         \
_(LISP_DISABLED, -90, "LISP is disabled")                               \
_(CLASSIFY_TABLE_NOT_FOUND, -91, "Classify table not found")            \
_(INVALID_EID_TYPE, -92, "Unsupported LISP EID type")                   \
_(CANNOT_CREATE_PCAP_FILE, -93, "Cannot create pcap file")              \
_(INCORRECT_ADJACENCY_TYPE, -94, "Invalid adjacency type for this operation") \
_(EXCEEDED_NUMBER_OF_RANGES_CAPACITY, -95, "Operation would exceed configured capacity of ranges") \
_(EXCEEDED_NUMBER_OF_PORTS_CAPACITY, -96, "Operation would exceed capacity of number of ports") \
_(INVALID_ADDRESS_FAMILY, -97, "Invalid address family")                \
_(INVALID_SUB_SW_IF_INDEX, -98, "Invalid sub-interface sw_if_index")    \
_(TABLE_TOO_BIG, -99, "Table too big")                                  \
_(CANNOT_ENABLE_DISABLE_FEATURE, -100, "Cannot enable/disable feature") \
_(BFD_EEXIST, -101, "Duplicate BFD object")                             \
_(BFD_ENOENT, -102, "No such BFD object")                               \
_(BFD_EINUSE, -103, "BFD object in use")                                \
_(BFD_NOTSUPP, -104, "BFD feature not supported")                       \
_(ADDRESS_IN_USE, -105, "Address in use")				\
_(ADDRESS_NOT_IN_USE, -106, "Address not in use")			\
_(QUEUE_FULL, -107, "Queue full")                                       \
_(APP_UNSUPPORTED_CFG, -108, "Unsupported application config")		\
_(URI_FIFO_CREATE_FAILED, -109, "URI FIFO segment create failed")       \
_(LISP_RLOC_LOCAL, -110, "RLOC address is local")                       \
_(BFD_EAGAIN, -111, "BFD object cannot be manipulated at this time")	\
_(INVALID_GPE_MODE, -112, "Invalid GPE mode")                           \
_(LISP_GPE_ENTRIES_PRESENT, -113, "LISP GPE entries are present")       \
_(ADDRESS_FOUND_FOR_INTERFACE, -114, "Address found for interface")	\
_(SESSION_CONNECT, -115, "Session failed to connect")              	\
_(ENTRY_ALREADY_EXISTS, -116, "Entry already exists")			\
_(SVM_SEGMENT_CREATE_FAIL, -117, "Svm segment create fail")		\
_(APPLICATION_NOT_ATTACHED, -118, "Application not attached")           \
_(BD_ALREADY_EXISTS, -119, "Bridge domain already exists")              \
_(BD_IN_USE, -120, "Bridge domain has member interfaces")		\
_(BD_NOT_MODIFIABLE, -121, "Bridge domain 0 can't be deleted/modified") \
_(BD_ID_EXCEED_MAX, -122, "Bridge domain ID exceeds 16M limit")		\
_(SUBIF_DOESNT_EXIST, -123, "Subinterface doesn't exist")               \
_(L2_MACS_EVENT_CLINET_PRESENT, -124, "Client already exist for L2 MACs events") \
_(INVALID_QUEUE, -125, "Invalid queue")                 		\
_(UNSUPPORTED, -126, "Unsupported")					\
_(DUPLICATE_IF_ADDRESS, -127, "Address already present on another interface")	\
_(APP_INVALID_NS, -128, "Invalid application namespace")			\
_(APP_WRONG_NS_SECRET, -129, "Wrong app namespace secret")		\
_(APP_CONNECT_SCOPE, -130, "Connect scope")				\
_(APP_ALREADY_ATTACHED, -131, "App already attached")			\
_(SESSION_REDIRECT, -132, "Redirect failed")				\
_(ILLEGAL_NAME, -133, "Illegal name")					\
_(NO_NAME_SERVERS, -134, "No name servers configured")			\
_(NAME_SERVER_NOT_FOUND, -135, "Name server not found")			\
_(NAME_RESOLUTION_NOT_ENABLED, -136, "Name resolution not enabled")	\
_(NAME_SERVER_FORMAT_ERROR, -137, "Server format error (bug!)")		\
_(NAME_SERVER_NO_SUCH_NAME, -138, "No such name")                       \
_(NAME_SERVER_NO_ADDRESSES, -139, "No addresses available")		\
_(NAME_SERVER_NEXT_SERVER, -140, "Retry with new server")		\
_(APP_CONNECT_FILTERED, -141, "Connect was filtered")			\
_(ACL_IN_USE_INBOUND, -142, "Inbound ACL in use")			\
_(ACL_IN_USE_OUTBOUND, -143, "Outbound ACL in use")			\
_(INIT_FAILED, -144, "Initialization Failed")				\
_(NETLINK_ERROR, -145, "Netlink error")                                 \
_(BIER_BSL_UNSUP, -146, "BIER bit-string-length unsupported")		\
_(INSTANCE_IN_USE, -147, "Instance in use")				\
_(INVALID_SESSION_ID, -148, "Session ID out of range")			\
_(ACL_IN_USE_BY_LOOKUP_CONTEXT, -149, "ACL in use by a lookup context")	\
_(INVALID_VALUE_3, -150, "Invalid value #3")                            \
_(NON_ETHERNET, -151, "Interface is not an Ethernet interface")         \
_(BD_ALREADY_HAS_BVI, -152, "Bridge domain already has a BVI interface") \
_(INVALID_PROTOCOL, -153, "Invalid Protocol")                           \
_(INVALID_ALGORITHM, -154, "Invalid Algorithm")                         \
_(RSRC_IN_USE, -155, "Resource In Use")                                 \
_(KEY_LENGTH, -156, "invalid Key Length")                               \
_(FIB_PATH_UNSUPPORTED_NH_PROTO, -157, "Unsupported FIB Path protocol") \
_(API_ENDIAN_FAILED, -159, "Endian mismatch detected")			\
_(NO_CHANGE, -160, "No change in table")				\
_(MISSING_CERT_KEY, -161, "Missing certifcate or key")                  \
_(LIMIT_EXCEEDED, -162, "limit exceeded")                               \
_(IKE_NO_PORT, -163, "port not managed by IKE")                         \
_(UDP_PORT_TAKEN, -164, "UDP port already taken")                       \
_(EAGAIN, -165, "Retry stream call with cursor")                        \
_(INVALID_VALUE_4, -166, "Invalid value #4")                           	\

typedef enum
{
#define _(a,b,c) VNET_API_ERROR_##a = (b),
  foreach_vnet_api_error
#undef _
    VNET_API_N_ERROR,
} vnet_api_error_t;

/* *INDENT-OFF* */
static inline u8 *
format_vnet_api_errno (u8 * s, va_list * args)
{
  vnet_api_error_t api_error = va_arg (*args, vnet_api_error_t);
#ifdef _
#undef _
#endif
#define _(a, b, c)           \
  case b:                    \
    s = format (s, "%s", c); \
    break;
  switch (api_error)
    {
      foreach_vnet_api_error
      default:
       	s = format (s, "UNKNOWN");
        break;
    }
  return s;
#undef _
}
/* *INDENT-ON* */

#endif /* included_vnet_api_errno_h */

/*
 * fd.io coding-style-patch-verification: ON
 *
 * Local Variables:
 * eval: (c-set-style "gnu")
 * End:
 */