Damjan Marion | 81bb6fc | 2022-01-16 22:47:55 +0100 | [diff] [blame] | 1 | /* SPDX-License-Identifier: Apache-2.0 |
| 2 | * Copyright(c) 2022 Cisco Systems, Inc. |
| 3 | */ |
| 4 | #ifndef included_vnet_error_h |
| 5 | #define included_vnet_error_h |
| 6 | |
| 7 | #include <stdarg.h> |
| 8 | #include <vppinfra/types.h> |
| 9 | #include <vppinfra/format.h> |
| 10 | |
| 11 | #define foreach_vnet_error \ |
| 12 | _ (UNSPECIFIED, -1, "Unspecified Error") \ |
| 13 | _ (INVALID_SW_IF_INDEX, -2, "Invalid sw_if_index") \ |
| 14 | _ (NO_SUCH_FIB, -3, "No such FIB / VRF") \ |
| 15 | _ (NO_SUCH_INNER_FIB, -4, "No such inner FIB / VRF") \ |
| 16 | _ (NO_SUCH_LABEL, -5, "No such label") \ |
| 17 | _ (NO_SUCH_ENTRY, -6, "No such entry") \ |
| 18 | _ (INVALID_VALUE, -7, "Invalid value") \ |
| 19 | _ (INVALID_VALUE_2, -8, "Invalid value #2") \ |
| 20 | _ (UNIMPLEMENTED, -9, "Unimplemented") \ |
| 21 | _ (INVALID_SW_IF_INDEX_2, -10, "Invalid sw_if_index #2") \ |
| 22 | _ (SYSCALL_ERROR_1, -11, "System call error #1") \ |
| 23 | _ (SYSCALL_ERROR_2, -12, "System call error #2") \ |
| 24 | _ (SYSCALL_ERROR_3, -13, "System call error #3") \ |
| 25 | _ (SYSCALL_ERROR_4, -14, "System call error #4") \ |
| 26 | _ (SYSCALL_ERROR_5, -15, "System call error #5") \ |
| 27 | _ (SYSCALL_ERROR_6, -16, "System call error #6") \ |
| 28 | _ (SYSCALL_ERROR_7, -17, "System call error #7") \ |
| 29 | _ (SYSCALL_ERROR_8, -18, "System call error #8") \ |
| 30 | _ (SYSCALL_ERROR_9, -19, "System call error #9") \ |
| 31 | _ (SYSCALL_ERROR_10, -20, "System call error #10") \ |
| 32 | _ (FEATURE_DISABLED, -30, "Feature disabled by configuration") \ |
| 33 | _ (INVALID_REGISTRATION, -31, "Invalid registration") \ |
| 34 | _ (NEXT_HOP_NOT_IN_FIB, -50, "Next hop not in FIB") \ |
| 35 | _ (UNKNOWN_DESTINATION, -51, "Unknown destination") \ |
| 36 | _ (NO_PATHS_IN_ROUTE, -52, "No paths specified in route") \ |
| 37 | _ (NEXT_HOP_NOT_FOUND_MP, -53, "Next hop not found (multipath)") \ |
| 38 | _ (NO_MATCHING_INTERFACE, -54, "No matching interface for probe") \ |
| 39 | _ (INVALID_VLAN, -55, "Invalid VLAN") \ |
| 40 | _ (VLAN_ALREADY_EXISTS, -56, "VLAN subif already exists") \ |
| 41 | _ (INVALID_SRC_ADDRESS, -57, "Invalid src address") \ |
| 42 | _ (INVALID_DST_ADDRESS, -58, "Invalid dst address") \ |
| 43 | _ (ADDRESS_LENGTH_MISMATCH, -59, "Address length mismatch") \ |
| 44 | _ (ADDRESS_NOT_FOUND_FOR_INTERFACE, -60, "Address not found for interface") \ |
| 45 | _ (ADDRESS_NOT_DELETABLE, -61, "Address not deletable") \ |
| 46 | _ (IP6_NOT_ENABLED, -62, "ip6 not enabled") \ |
| 47 | _ (NO_SUCH_NODE, -63, "No such graph node") \ |
| 48 | _ (NO_SUCH_NODE2, -64, "No such graph node #2") \ |
| 49 | _ (NO_SUCH_TABLE, -65, "No such table") \ |
| 50 | _ (NO_SUCH_TABLE2, -66, "No such table #2") \ |
| 51 | _ (NO_SUCH_TABLE3, -67, "No such table #3") \ |
| 52 | _ (SUBIF_ALREADY_EXISTS, -68, "Subinterface already exists") \ |
| 53 | _ (SUBIF_CREATE_FAILED, -69, "Subinterface creation failed") \ |
| 54 | _ (INVALID_MEMORY_SIZE, -70, "Invalid memory size requested") \ |
| 55 | _ (INVALID_INTERFACE, -71, "Invalid interface") \ |
| 56 | _ (INVALID_VLAN_TAG_COUNT, -72, \ |
| 57 | "Invalid number of tags for requested operation") \ |
| 58 | _ (INVALID_ARGUMENT, -73, "Invalid argument") \ |
| 59 | _ (UNEXPECTED_INTF_STATE, -74, "Unexpected interface state") \ |
| 60 | _ (TUNNEL_EXIST, -75, "Tunnel already exists") \ |
| 61 | _ (INVALID_DECAP_NEXT, -76, "Invalid decap-next") \ |
| 62 | _ (RESPONSE_NOT_READY, -77, "Response not ready") \ |
| 63 | _ (NOT_CONNECTED, -78, "Not connected to the data plane") \ |
| 64 | _ (IF_ALREADY_EXISTS, -79, "Interface already exists") \ |
| 65 | _ (BOND_SLAVE_NOT_ALLOWED, -80, \ |
| 66 | "Operation not allowed on slave of BondEthernet") \ |
| 67 | _ (VALUE_EXIST, -81, "Value already exists") \ |
| 68 | _ (SAME_SRC_DST, -82, "Source and destination are the same") \ |
| 69 | _ (IP6_MULTICAST_ADDRESS_NOT_PRESENT, -83, \ |
| 70 | "IP6 multicast address required") \ |
| 71 | _ (SR_POLICY_NAME_NOT_PRESENT, -84, "Segment routing policy name required") \ |
| 72 | _ (NOT_RUNNING_AS_ROOT, -85, "Not running as root") \ |
| 73 | _ (ALREADY_CONNECTED, -86, "Connection to the data plane already exists") \ |
| 74 | _ (UNSUPPORTED_JNI_VERSION, -87, "Unsupported JNI version") \ |
| 75 | _ (IP_PREFIX_INVALID, -88, "IP prefix invalid (masked bits set in address") \ |
| 76 | _ (INVALID_WORKER, -89, "Invalid worker thread") \ |
| 77 | _ (LISP_DISABLED, -90, "LISP is disabled") \ |
| 78 | _ (CLASSIFY_TABLE_NOT_FOUND, -91, "Classify table not found") \ |
| 79 | _ (INVALID_EID_TYPE, -92, "Unsupported LISP EID type") \ |
| 80 | _ (CANNOT_CREATE_PCAP_FILE, -93, "Cannot create pcap file") \ |
| 81 | _ (INCORRECT_ADJACENCY_TYPE, -94, \ |
| 82 | "Invalid adjacency type for this operation") \ |
| 83 | _ (EXCEEDED_NUMBER_OF_RANGES_CAPACITY, -95, \ |
| 84 | "Operation would exceed configured capacity of ranges") \ |
| 85 | _ (EXCEEDED_NUMBER_OF_PORTS_CAPACITY, -96, \ |
| 86 | "Operation would exceed capacity of number of ports") \ |
| 87 | _ (INVALID_ADDRESS_FAMILY, -97, "Invalid address family") \ |
| 88 | _ (INVALID_SUB_SW_IF_INDEX, -98, "Invalid sub-interface sw_if_index") \ |
| 89 | _ (TABLE_TOO_BIG, -99, "Table too big") \ |
| 90 | _ (CANNOT_ENABLE_DISABLE_FEATURE, -100, "Cannot enable/disable feature") \ |
| 91 | _ (BFD_EEXIST, -101, "Duplicate BFD object") \ |
| 92 | _ (BFD_ENOENT, -102, "No such BFD object") \ |
| 93 | _ (BFD_EINUSE, -103, "BFD object in use") \ |
| 94 | _ (BFD_NOTSUPP, -104, "BFD feature not supported") \ |
| 95 | _ (ADDRESS_IN_USE, -105, "Address in use") \ |
| 96 | _ (ADDRESS_NOT_IN_USE, -106, "Address not in use") \ |
| 97 | _ (QUEUE_FULL, -107, "Queue full") \ |
| 98 | _ (APP_UNSUPPORTED_CFG, -108, "Unsupported application config") \ |
| 99 | _ (URI_FIFO_CREATE_FAILED, -109, "URI FIFO segment create failed") \ |
| 100 | _ (LISP_RLOC_LOCAL, -110, "RLOC address is local") \ |
| 101 | _ (BFD_EAGAIN, -111, "BFD object cannot be manipulated at this time") \ |
| 102 | _ (INVALID_GPE_MODE, -112, "Invalid GPE mode") \ |
| 103 | _ (LISP_GPE_ENTRIES_PRESENT, -113, "LISP GPE entries are present") \ |
| 104 | _ (ADDRESS_FOUND_FOR_INTERFACE, -114, "Address found for interface") \ |
| 105 | _ (SESSION_CONNECT, -115, "Session failed to connect") \ |
| 106 | _ (ENTRY_ALREADY_EXISTS, -116, "Entry already exists") \ |
| 107 | _ (SVM_SEGMENT_CREATE_FAIL, -117, "Svm segment create fail") \ |
| 108 | _ (APPLICATION_NOT_ATTACHED, -118, "Application not attached") \ |
| 109 | _ (BD_ALREADY_EXISTS, -119, "Bridge domain already exists") \ |
| 110 | _ (BD_IN_USE, -120, "Bridge domain has member interfaces") \ |
| 111 | _ (BD_NOT_MODIFIABLE, -121, "Bridge domain 0 can't be deleted/modified") \ |
| 112 | _ (BD_ID_EXCEED_MAX, -122, "Bridge domain ID exceeds 16M limit") \ |
| 113 | _ (SUBIF_DOESNT_EXIST, -123, "Subinterface doesn't exist") \ |
| 114 | _ (L2_MACS_EVENT_CLINET_PRESENT, -124, \ |
| 115 | "Client already exist for L2 MACs events") \ |
| 116 | _ (INVALID_QUEUE, -125, "Invalid queue") \ |
| 117 | _ (UNSUPPORTED, -126, "Unsupported") \ |
| 118 | _ (DUPLICATE_IF_ADDRESS, -127, \ |
| 119 | "Address already present on another interface") \ |
| 120 | _ (APP_INVALID_NS, -128, "Invalid application namespace") \ |
| 121 | _ (APP_WRONG_NS_SECRET, -129, "Wrong app namespace secret") \ |
| 122 | _ (APP_CONNECT_SCOPE, -130, "Connect scope") \ |
| 123 | _ (APP_ALREADY_ATTACHED, -131, "App already attached") \ |
| 124 | _ (SESSION_REDIRECT, -132, "Redirect failed") \ |
| 125 | _ (ILLEGAL_NAME, -133, "Illegal name") \ |
| 126 | _ (NO_NAME_SERVERS, -134, "No name servers configured") \ |
| 127 | _ (NAME_SERVER_NOT_FOUND, -135, "Name server not found") \ |
| 128 | _ (NAME_RESOLUTION_NOT_ENABLED, -136, "Name resolution not enabled") \ |
| 129 | _ (NAME_SERVER_FORMAT_ERROR, -137, "Server format error (bug!)") \ |
| 130 | _ (NAME_SERVER_NO_SUCH_NAME, -138, "No such name") \ |
| 131 | _ (NAME_SERVER_NO_ADDRESSES, -139, "No addresses available") \ |
| 132 | _ (NAME_SERVER_NEXT_SERVER, -140, "Retry with new server") \ |
| 133 | _ (APP_CONNECT_FILTERED, -141, "Connect was filtered") \ |
| 134 | _ (ACL_IN_USE_INBOUND, -142, "Inbound ACL in use") \ |
| 135 | _ (ACL_IN_USE_OUTBOUND, -143, "Outbound ACL in use") \ |
| 136 | _ (INIT_FAILED, -144, "Initialization Failed") \ |
| 137 | _ (NETLINK_ERROR, -145, "Netlink error") \ |
| 138 | _ (BIER_BSL_UNSUP, -146, "BIER bit-string-length unsupported") \ |
| 139 | _ (INSTANCE_IN_USE, -147, "Instance in use") \ |
| 140 | _ (INVALID_SESSION_ID, -148, "Session ID out of range") \ |
| 141 | _ (ACL_IN_USE_BY_LOOKUP_CONTEXT, -149, "ACL in use by a lookup context") \ |
| 142 | _ (INVALID_VALUE_3, -150, "Invalid value #3") \ |
| 143 | _ (NON_ETHERNET, -151, "Interface is not an Ethernet interface") \ |
| 144 | _ (BD_ALREADY_HAS_BVI, -152, "Bridge domain already has a BVI interface") \ |
| 145 | _ (INVALID_PROTOCOL, -153, "Invalid Protocol") \ |
| 146 | _ (INVALID_ALGORITHM, -154, "Invalid Algorithm") \ |
| 147 | _ (RSRC_IN_USE, -155, "Resource In Use") \ |
| 148 | _ (KEY_LENGTH, -156, "invalid Key Length") \ |
| 149 | _ (FIB_PATH_UNSUPPORTED_NH_PROTO, -157, "Unsupported FIB Path protocol") \ |
| 150 | _ (API_ENDIAN_FAILED, -159, "Endian mismatch detected") \ |
| 151 | _ (NO_CHANGE, -160, "No change in table") \ |
| 152 | _ (MISSING_CERT_KEY, -161, "Missing certifcate or key") \ |
| 153 | _ (LIMIT_EXCEEDED, -162, "limit exceeded") \ |
| 154 | _ (IKE_NO_PORT, -163, "port not managed by IKE") \ |
| 155 | _ (UDP_PORT_TAKEN, -164, "UDP port already taken") \ |
| 156 | _ (EAGAIN, -165, "Retry stream call with cursor") \ |
| 157 | _ (INVALID_VALUE_4, -166, "Invalid value #4") \ |
| 158 | _ (BUSY, -167, "Busy") \ |
Filip Varga | 36c7e7c | 2022-11-23 10:47:56 -0800 | [diff] [blame] | 159 | _ (BUG, -168, "Bug") \ |
| 160 | _ (FEATURE_ALREADY_DISABLED, -169, "Feature already disabled") \ |
| 161 | _ (FEATURE_ALREADY_ENABLED, -170, "Feature already enabled") |
Damjan Marion | 81bb6fc | 2022-01-16 22:47:55 +0100 | [diff] [blame] | 162 | |
| 163 | typedef enum |
| 164 | { |
| 165 | #define _(a, b, c) VNET_ERR_##a = (b), |
| 166 | foreach_vnet_error |
| 167 | #undef _ |
| 168 | VNET_N_ERROR, |
| 169 | } vnet_error_t; |
| 170 | |
| 171 | clib_error_t __clib_warn_unused_result *vnet_error (vnet_error_t code, |
| 172 | char *fmt, ...); |
| 173 | |
| 174 | format_function_t format_vnet_api_errno; |
| 175 | |
| 176 | #endif |