---
#
# ============LICENSE_START=======================================================
#  Copyright (C) 2019 Nordix Foundation.
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# SPDX-License-Identifier: Apache-2.0
# ============LICENSE_END=========================================================

#--------------------------------------------------------------------------------------
# The jobs declared in this JJB configuration file are used for verifying cloud-infra
# engine from the tip of the master branch periodically to check the stability of it.
#
# These jobs are set to run on slaves with label vpod-deploy-ubuntu1604.
# The slaves have
#   - Ubuntu1604 as the base distro
#   - nested virtualization
#   - internet access
#   - passwordless sudo
#   - 16 CPUs/32GB RAM/200 GB Disk
#   - docker, git vim curl wget zip unzip chrony apt-transport-https ca-certificates curl
#     gnupg-agent software-properties-common docker-ce docker-ce-cli containerd.io openjdk-8-jre
#
# The slaves should not have a cloud infra scenario deployed on them.
#--------------------------------------------------------------------------------------

- project:
    name: 'cloud-infra-periodic-onap'

    project: 'infra/engine'

    onap-branch:
      - 'dublin':
          nordix-branch: master
          onap-version: 4.0.0-ONAP
          engine-version: master
          engine-refspec: "refs/changes/71/1771/4"
          deploy-scenario-version: "9a215b7935ab2b14cc7451ba15ea575e62e26da7"
          deploy-scenario-refspec: "refs/changes/65/1765/12"
          disabled: false
      - 'master':
          nordix-branch: master
          onap-version: master
          engine-version: master
          engine-refspec: master
          deploy-scenario-version: master
          deploy-scenario-refspec: master
          disabled: true

    distro:
      - ubuntu1804

    deploy-scenario:
      - onap-oom-nofeature

    type:
      - cloud:
          provisioner-type: heat
          installer-type: kubespray
          slave-label: 'jumphost-onap-ubuntu1804'

    onap-other-phases:
      - onap-deploy:
          build-timeout: 150
      - oom-healthcheck:
          build-timeout: 30
          test-type: oom-healthcheck
      - promote-onap:
          build-timeout: 5
      - delete-stack:
          build-timeout: 5

    onap-healthcheck-phases:
      - onap-healthcheck-core:
          build-timeout: 30
          test-type: onap-healthcheck
      - onap-healthcheck-small:
          build-timeout: 30
          test-type: onap-healthcheck
      - onap-healthcheck-medium:
          build-timeout: 30
          test-type: onap-healthcheck
      - onap-healthcheck-full:
          build-timeout: 30
          test-type: onap-healthcheck

    jobs:
      - '{deploy-scenario}-periodic-{distro}-{installer-type}-{type}-{onap-branch}'
      - '{onap-other-phases}-periodic-{distro}-{installer-type}-{type}-{onap-branch}'
      - '{onap-healthcheck-phases}-periodic-{distro}-{installer-type}-{type}-{onap-branch}'

- job-template:
    name: '{deploy-scenario}-periodic-{distro}-{installer-type}-{type}-{onap-branch}'

    project-type: multijob

    disabled: '{obj:disabled}'

    concurrent: true

    parameters:
      - onap-parameter-macro
      - string:
          name: ONAP_VERSION
          default: '{onap-version}'
          description: 'ONAP version to deploy'
      - string:
          name: ENGINE_VERSION
          default: '{engine-version}'
          description: 'Development purposes only! Nordix Cloud Infra Engine version to use for deploying ONAP. Could be sha, branch'
      - string:
          name: ENGINE_REFSPEC
          default: '{engine-refspec}'
          description: 'Development purposes only! Nordix Cloud Infra Engine version to use for deploying ONAP. Must be refspec.'
      - string:
          name: DEPLOY_SCENARIO_VERSION
          default: '{deploy-scenario-version}'
          description: 'Development purposes only! Nordix Cloud Infra Scenario version to use for deploying ONAP. Depends on DEPLOY_SCENARIO_REFSPEC and could be sha, branch.'
      - string:
          name: DEPLOY_SCENARIO_REFSPEC
          default: '{deploy-scenario-refspec}'
          description: 'Development purposes only! Nordix Cloud Infra Scenario version to use for deploying ONAP. Depends on DEPLOY_SCENARIO_VERSION and must be refspec.'

    properties:
      - logrotate
      - build-blocker:
          use-build-blocker: true
          blocking-jobs:
            - 'cloud-infra-periodic-engine-.*'
            - 'onap-.*'
            - 'k8-.*'
          block-level: 'NODE'
      - throttle:
          max-per-node: 1
          max-total: 3
          option: project

    wrappers:
      - build-timeout:
          timeout: 220
      - fix-workspace-permissions

    scm:
      - git-scm:
          ssh-credentials-id: nordixinfra-nordix-gerrit-ssh
          branch: '{nordix-branch}'
          refspec: ''
          wipe_workspace: true
          clean_before: false

    builders:
      - description-setter:
          description: $INSTALLER_TYPE | $DEPLOY_SCENARIO
      - multijob:
          name: Deploy ONAP using OOM
          condition: SUCCESSFUL
          projects:
            - name: 'onap-deploy-periodic-{distro}-{installer-type}-{type}-{onap-branch}'
              current-parameters: false
              predefined-parameters: |
                DISTRO=$DISTRO
                DEPLOY_TYPE=$DEPLOY_TYPE
                PROVISIONER_TYPE=$PROVISIONER_TYPE
                INSTALLER_TYPE=$INSTALLER_TYPE
                DEPLOY_SCENARIO=$DEPLOY_SCENARIO
                ONAP_VERSION=$ONAP_VERSION
                ONAP_FLAVOR=$ONAP_FLAVOR
                ENGINE_VERSION=$ENGINE_VERSION
                ENGINE_REFSPEC=$ENGINE_REFSPEC
                DEPLOY_SCENARIO_VERSION=$DEPLOY_SCENARIO_VERSION
                DEPLOY_SCENARIO_REFSPEC=$DEPLOY_SCENARIO_REFSPEC
                XTESTING_REPO_URL=$XTESTING_REPO_URL
                ENGINE_ANSIBLE_PARAMS=$ENGINE_ANSIBLE_PARAMS
                CLEANUP=$CLEANUP
              git-revision: true
              node-parameters: true
              kill-phase-on: FAILURE
              abort-all-job: true
      - multijob:
          name: K8S and OOM Healthcheck using xtesting
          condition: ALWAYS
          projects:
            - name: 'oom-healthcheck-periodic-{distro}-{installer-type}-{type}-{onap-branch}'
              current-parameters: false
              predefined-parameters: |
                DISTRO=$DISTRO
                DEPLOY_TYPE=$DEPLOY_TYPE
                PROVISIONER_TYPE=$PROVISIONER_TYPE
                INSTALLER_TYPE=$INSTALLER_TYPE
                DEPLOY_SCENARIO=$DEPLOY_SCENARIO
                ONAP_VERSION=$ONAP_VERSION
                ONAP_FLAVOR=full
                TEST_TYPE=oom-healthcheck
                ENGINE_VERSION=$ENGINE_VERSION
                ENGINE_REFSPEC=$ENGINE_REFSPEC
                DEPLOY_SCENARIO_VERSION=$DEPLOY_SCENARIO_VERSION
                DEPLOY_SCENARIO_REFSPEC=$DEPLOY_SCENARIO_REFSPEC
                XTESTING_REPO_URL=$XTESTING_REPO_URL
                ENGINE_ANSIBLE_PARAMS=$ENGINE_ANSIBLE_PARAMS
                CLEANUP=$CLEANUP
              node-parameters: true
              kill-phase-on: NEVER
              abort-all-job: false
      - multijob:
          name: ONAP Healthcheck using xtesting
          condition: ALWAYS
          projects:
            - name: 'onap-healthcheck-core-periodic-{distro}-{installer-type}-{type}-{onap-branch}'
              current-parameters: false
              predefined-parameters: |
                SLAVE_LABEL=$SLAVE_LABEL
                DISTRO=$DISTRO
                PROVISIONER_TYPE=$PROVISIONER_TYPE
                INSTALLER_TYPE=$INSTALLER_TYPE
                DEPLOY_SCENARIO=$DEPLOY_SCENARIO
                DEPLOY_TYPE=$DEPLOY_TYPE
                ONAP_VERSION=$ONAP_VERSION
                ONAP_FLAVOR=core
                TEST_TYPE=onap-healthcheck
                ENGINE_VERSION=$ENGINE_VERSION
                ENGINE_REFSPEC=$ENGINE_REFSPEC
                DEPLOY_SCENARIO_VERSION=$DEPLOY_SCENARIO_VERSION
                DEPLOY_SCENARIO_REFSPEC=$DEPLOY_SCENARIO_REFSPEC
                XTESTING_REPO_URL=$XTESTING_REPO_URL
                ENGINE_ANSIBLE_PARAMS=$ENGINE_ANSIBLE_PARAMS
                CLEANUP=$CLEANUP
              node-parameters: true
              kill-phase-on: NEVER
              abort-all-job: false
            - name: 'onap-healthcheck-small-periodic-{distro}-{installer-type}-{type}-{onap-branch}'
              current-parameters: false
              predefined-parameters: |
                SLAVE_LABEL=$SLAVE_LABEL
                DISTRO=$DISTRO
                PROVISIONER_TYPE=$PROVISIONER_TYPE
                INSTALLER_TYPE=$INSTALLER_TYPE
                DEPLOY_SCENARIO=$DEPLOY_SCENARIO
                DEPLOY_TYPE=$DEPLOY_TYPE
                ONAP_VERSION=$ONAP_VERSION
                ONAP_FLAVOR=small
                TEST_TYPE=onap-healthcheck
                ENGINE_VERSION=$ENGINE_VERSION
                ENGINE_REFSPEC=$ENGINE_REFSPEC
                DEPLOY_SCENARIO_VERSION=$DEPLOY_SCENARIO_VERSION
                DEPLOY_SCENARIO_REFSPEC=$DEPLOY_SCENARIO_REFSPEC
                XTESTING_REPO_URL=$XTESTING_REPO_URL
                ENGINE_ANSIBLE_PARAMS=$ENGINE_ANSIBLE_PARAMS
                CLEANUP=$CLEANUP
              node-parameters: true
              kill-phase-on: NEVER
              abort-all-job: false
            - name: 'onap-healthcheck-medium-periodic-{distro}-{installer-type}-{type}-{onap-branch}'
              current-parameters: false
              predefined-parameters: |
                SLAVE_LABEL=$SLAVE_LABEL
                DISTRO=$DISTRO
                PROVISIONER_TYPE=$PROVISIONER_TYPE
                INSTALLER_TYPE=$INSTALLER_TYPE
                DEPLOY_SCENARIO=$DEPLOY_SCENARIO
                DEPLOY_TYPE=$DEPLOY_TYPE
                ONAP_VERSION=$ONAP_VERSION
                ONAP_FLAVOR=medium
                TEST_TYPE=onap-healthcheck
                ENGINE_VERSION=$ENGINE_VERSION
                ENGINE_REFSPEC=$ENGINE_REFSPEC
                DEPLOY_SCENARIO_VERSION=$DEPLOY_SCENARIO_VERSION
                DEPLOY_SCENARIO_REFSPEC=$DEPLOY_SCENARIO_REFSPEC
                XTESTING_REPO_URL=$XTESTING_REPO_URL
                ENGINE_ANSIBLE_PARAMS=$ENGINE_ANSIBLE_PARAMS
                CLEANUP=$CLEANUP
              node-parameters: true
              kill-phase-on: NEVER
              abort-all-job: false
            - name: 'onap-healthcheck-full-periodic-{distro}-{installer-type}-{type}-{onap-branch}'
              current-parameters: false
              predefined-parameters: |
                SLAVE_LABEL=$SLAVE_LABEL
                DISTRO=$DISTRO
                PROVISIONER_TYPE=$PROVISIONER_TYPE
                INSTALLER_TYPE=$INSTALLER_TYPE
                DEPLOY_SCENARIO=$DEPLOY_SCENARIO
                DEPLOY_TYPE=$DEPLOY_TYPE
                ONAP_VERSION=$ONAP_VERSION
                ONAP_FLAVOR=full
                TEST_TYPE=onap-healthcheck
                ENGINE_VERSION=$ENGINE_VERSION
                ENGINE_REFSPEC=$ENGINE_REFSPEC
                DEPLOY_SCENARIO_VERSION=$DEPLOY_SCENARIO_VERSION
                DEPLOY_SCENARIO_REFSPEC=$DEPLOY_SCENARIO_REFSPEC
                XTESTING_REPO_URL=$XTESTING_REPO_URL
                ENGINE_ANSIBLE_PARAMS=$ENGINE_ANSIBLE_PARAMS
                CLEANUP=$CLEANUP
              node-parameters: true
              kill-phase-on: NEVER
              abort-all-job: false
      - multijob:
          name: Promote ONAP (not activated)
          condition: ALWAYS
          projects:
            - name: 'promote-onap-periodic-{distro}-{installer-type}-{type}-{onap-branch}'
              current-parameters: false
              predefined-parameters: |
                DISTRO=$DISTRO
                DEPLOY_TYPE=$DEPLOY_TYPE
                INSTALLER_TYPE=$INSTALLER_TYPE
                DEPLOY_SCENARIO=$DEPLOY_SCENARIO
                ONAP_VERSION=$ONAP_VERSION
                ONAP_FLAVOR=$ONAP_FLAVOR
                ENGINE_VERSION=$ENGINE_VERSION
                ENGINE_REFSPEC=$ENGINE_REFSPEC
                DEPLOY_SCENARIO_VERSION=$DEPLOY_SCENARIO_VERSION
                DEPLOY_SCENARIO_REFSPEC=$DEPLOY_SCENARIO_REFSPEC
                XTESTING_REPO_URL=$XTESTING_REPO_URL
                ENGINE_ANSIBLE_PARAMS=$ENGINE_ANSIBLE_PARAMS
                CLEANUP=$CLEANUP
              node-parameters: true
              kill-phase-on: NEVER
              abort-all-job: false
      - multijob:
          name: Delete Stack
          condition: ALWAYS
          projects:
            - name: 'delete-stack-periodic-{distro}-{installer-type}-{type}-{onap-branch}'
              current-parameters: false
              predefined-parameters: |
                DISTRO=$DISTRO
                DEPLOY_TYPE=$DEPLOY_TYPE
                INSTALLER_TYPE=$INSTALLER_TYPE
                DEPLOY_SCENARIO=$DEPLOY_SCENARIO
                ONAP_VERSION=$ONAP_VERSION
                ONAP_FLAVOR=$ONAP_FLAVOR
                ENGINE_VERSION=$ENGINE_VERSION
                ENGINE_REFSPEC=$ENGINE_REFSPEC
                DEPLOY_SCENARIO_VERSION=$DEPLOY_SCENARIO_VERSION
                DEPLOY_SCENARIO_REFSPEC=$DEPLOY_SCENARIO_REFSPEC
                XTESTING_REPO_URL=$XTESTING_REPO_URL
                ENGINE_ANSIBLE_PARAMS=$ENGINE_ANSIBLE_PARAMS
                CLEANUP=$CLEANUP
              node-parameters: true
              kill-phase-on: NEVER
              abort-all-job: false

- job-template:
    name: '{onap-other-phases}-periodic-{distro}-{installer-type}-{type}-{onap-branch}'

    disabled: false

    concurrent: true

    properties:
      - logrotate

    parameters:
      - onap-parameter-macro
      - string:
          name: ONAP_VERSION
          default: '{onap-version}'
          description: 'ONAP version to deploy'

    wrappers:
      - credentials-binding:
          - file:
              credential-id: nordix-jenkins-openrcfile-city-frankfurt-defaultproject
              variable: OPENRC_FILE
      - mask-passwords
      - build-timeout:
          timeout: '{build-timeout}'
      - fix-workspace-permissions

    scm:
      - git-scm:
          ssh-credentials-id: nordixinfra-nordix-gerrit-ssh
          branch: '{nordix-branch}'
          refspec: ''
          wipe_workspace: true
          clean_before: false

    builders:
      - description-setter:
          description: $INSTALLER_TYPE $DEPLOY_SCENARIO
      - '{onap-other-phases}-macro'

- job-template:
    name: '{onap-healthcheck-phases}-periodic-{distro}-{installer-type}-{type}-{onap-branch}'

    disabled: false

    concurrent: true

    properties:
      - logrotate

    parameters:
      - onap-parameter-macro
      - string:
          name: ONAP_VERSION
          default: '{onap-version}'
          description: 'ONAP version to deploy'
      - string:
          name: ENGINE_VERSION
          default: '{engine-version}'
          description: 'Development purposes only! Nordix Cloud Infra Engine version to use for deploying ONAP. Could be sha, branch'
      - string:
          name: ENGINE_REFSPEC
          default: '{engine-refspec}'
          description: 'Development purposes only! Nordix Cloud Infra Engine version to use for deploying ONAP. Must be refspec.'
      - string:
          name: DEPLOY_SCENARIO_VERSION
          default: '{deploy-scenario-version}'
          description: 'Development purposes only! Nordix Cloud Infra Scenario version to use for deploying ONAP. Depends on DEPLOY_SCENARIO_REFSPEC and could be sha, branch.'
      - string:
          name: DEPLOY_SCENARIO_REFSPEC
          default: '{deploy-scenario-refspec}'
          description: 'Development purposes only! Nordix Cloud Infra Scenario version to use for deploying ONAP. Depends on DEPLOY_SCENARIO_VERSION and must be refspec.'

    wrappers:
      - credentials-binding:
          - file:
              credential-id: nordix-jenkins-openrcfile-city-frankfurt-defaultproject
              variable: OPENRC_FILE
      - mask-passwords
      - build-timeout:
          timeout: '{build-timeout}'
      - fix-workspace-permissions

    scm:
      - git-scm:
          ssh-credentials-id: nordixinfra-nordix-gerrit-ssh
          branch: '{nordix-branch}'
          refspec: ''
          wipe_workspace: true
          clean_before: false

    builders:
      - description-setter:
          description: $INSTALLER_TYPE $DEPLOY_SCENARIO
      - 'onap-healthcheck-macro'

# vim: set ts=2 sw=2 expandtab: