src/main/resources/application.properties - onap/clamp - Gitiles

 ###
 # ============LICENSE_START=======================================================
 # ONAP CLAMP
 # ================================================================================
 # Copyright (C) 2017-2018 AT&T Intellectual Property. All rights
 #                             reserved.
 # ================================================================================
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 # http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 # ============LICENSE_END============================================
 # ===================================================================
 # ECOMP is a trademark and service mark of AT&T Intellectual Property.
 ###

 info.build.artifact=@project.artifactId@
 info.build.name=@project.name@
 info.build.description=@project.description@
 info.build.version=@project.version@

 ### Set the port for HTTP or HTTPS protocol (Controlled by Spring framework, only one at a time).
 ### (See below for the parameter 'server.http.port' if you want to have both enabled)
 ### To have only HTTP, keep the lines server.ssl.* commented
 ### To have only HTTPS enabled, uncomment the server.ssl.* lines and specify a right keystore location
 server.port=8080
 ### Settings for HTTPS (this automatically enables the HTTPS on the port 'server.port')
 #server.ssl.key-store=file:/tmp/mykey.jks
 #server.ssl.key-store-password=pass
 #server.ssl.key-password=pass

 ### In order to be user friendly when HTTPS is enabled,
 ### you can add another HTTP port that will be automatically redirected to HTTPS
 ### by enabling this parameter (server.http.port) and set it to another port (80 or 8080, 8090, etc ...)
 #server.http-to-https-redirection.port=8090

 ### HTTP Example:
 ###--------------
 ### server.port=8080

 ### HTTPS Example:
 ### --------------
 ### server.port=8443
 ### server.ssl.key-store=file:/tmp/mykey.jks
 ### server.ssl.key-store-password=mypass
 ### server.ssl.key-password=mypass

 ### HTTP (Redirected to HTTPS) and HTTPS Example:
 ### --------------------------------------------
 ### server.port=8443           <-- The HTTPS port
 ### server.ssl.key-store=file:/tmp/mykey.jks
 ### server.ssl.key-store-password=mypass
 ### server.ssl.key-password=mypass
 ### server.http-to-https-redirection.port=8090  <-- The HTTP port

 server.contextPath=/
 #Modified engine-rest applicationpath
 spring.profiles.active=clamp-default,clamp-spring-authentication

 #The max number of active threads in this pool
 server.tomcat.max-threads=200
 #The minimum number of threads always kept alive
 server.tomcat.min-Spare-Threads=25
 #The number of milliseconds before an idle thread shutsdown, unless the number of active threads are less or equal to minSpareThreads
 server.tomcat.max-idle-time=60000

 #Servlet context parameters
 server.context_parameters.p-name=value #context parameter with p-name as key and value as value.

 camel.springboot.consumer-template-cache-size=1000
 camel.springboot.producer-template-cache-size=1000
 camel.springboot.jmx-enabled=false
 camel.defaultthreadpool.poolsize=10
 camel.defaultthreadpool.maxpoolsize=20
 camel.defaultthreadpool.maxqueuesize=1000
 camel.defaultthreadpool.keepaliveTime=60
 camel.defaultthreadpool.rejectpolicy=CallerRuns
 #camel.springboot.xmlRoutes = false
 camel.springboot.xmlRoutes=classpath:/clds/camel/*.xml
 #camel.springboot.typeConversion = false

 #clds datasource connection details
 spring.datasource.cldsdb.driverClassName=org.mariadb.jdbc.Driver
 spring.datasource.cldsdb.url=jdbc:mariadb:sequential://localhost:${docker.mariadb.port.host}/cldsdb4?autoReconnect=true&connectTimeout=10000&socketTimeout=10000&retriesAllDown=3
 spring.datasource.cldsdb.username=clds
 spring.datasource.cldsdb.password=4c90a0b48204383f4283448d23e0b885a47237b2a23588e7c4651604f51c1067
 spring.datasource.cldsdb.validationQuery=SELECT 1
 spring.datasource.cldsdb.validationQueryTimeout=20000
 spring.datasource.cldsdb.validationInterval=30000
 spring.datasource.cldsdb.testWhileIdle = true
 spring.datasource.cldsdb.minIdle = 0
 spring.datasource.cldsdb.initialSize=0
 # Automatically test whether a connection provided is good or not
 spring.datasource.cldsdb.testOnBorrow=true
 spring.datasource.cldsdb.ignoreExceptionOnPreLoad=true

 #Async Executor default Parameters
 async.core.pool.size=10
 async.max.pool.size=20
 async.queue.capacity=500

 org.onap.clamp.config.files.cldsPolicyConfig=classpath:/clds/clds-policy-config.properties
 org.onap.clamp.config.files.cldsUsers=classpath:/clds/clds-users.json
 clamp.config.files.globalProperties=classpath:/clds/templates/globalProperties.json
 org.onap.clamp.config.files.sdcController=classpath:/clds/sdc-controllers-config.json

 # Properties for Clamp
 # DCAE request build properties
 #
 clamp.config.dcae.template=classpath:/clds/templates/dcae-template.json
 clamp.config.dcae.decode.service_ids=classpath:/clds/templates/dcae-decode-service_ids.json
 clamp.config.dcae.deployment.template=classpath:/clds/templates/dcae-deployment-template.json
 #
 # SDC request blueprint properties
 #
 clamp.config.sdc.template=classpath:/clds/templates/sdc-template.json
 clamp.config.sdc.decode.service_ids=classpath:/clds/templates/sdc-decode-service_ids.json
 #
 #
 # General Policy request properties
 #
 clamp.config.policy.onap.name=DCAE
 clamp.config.policy.pdp.group=default
 clamp.config.policy.ms.type=MicroService
 clamp.config.policy.ms.policyNamePrefix=Config_MS_
 clamp.config.policy.op.type=BRMS_Param
 clamp.config.policy.op.policyNamePrefix=Config_BRMS_Param_

 # TCA MicroService Policy request build properties
 #
 clamp.config.tca.policyid.prefix=DCAE.Config_
 clamp.config.tca.policy.template=classpath:/clds/templates/tca-policy-template.json
 clamp.config.tca.template=classpath:/clds/templates/tca-template.json
 clamp.config.tca.thresholds.template=classpath:/clds/templates/tca-thresholds-template.json

 #
 #
 # Operational Policy request build properties
 #
 clamp.config.op.policyDescription=from clds
 # default
 clamp.config.op.templateName=ClosedLoopvUSP
 clamp.config.op.operationTopic=APPC-CL
 clamp.config.op.notificationTopic=POLICY-CL-MGT
 clamp.config.op.controller=amsterdam
 clamp.config.op.policy.appc=APPC
 # by service: vSCP
 clamp.config.op.templateName.vSCP=ClosedLoopTemplate
 clamp.config.op.controller.vSCP=1607-f5fw
 clamp.config.op.eNodeB.templateName=ClosedLoopControlName
 clamp.config.op.eNodeB.operationTopic=com.onap.sdnr.RanCLRequest-v00
 clamp.config.op.eNodeB.notificationTopic=com.onap-policy.IST-ENODEB-CL
 clamp.config.op.eNodeB.controller=amsterdam
 clamp.config.op.eNodeB.recipe=classpath:/clds/templates/op-eNodeB-recipe.json
 clamp.config.op.eNodeB.timeWindow=35
 clamp.config.op.eNodeB.limit=2
 clamp.config.op.eNodeB.period=10s
 #
 # Sdc service properties
 clamp.config.sdc.catalog.url=http://sdc.api.simpledemo.onap.org:8080/sdc/v1/catalog/
 clamp.config.sdc.hostUrl=http://sdc.api.simpledemo.onap.org:8080
 clamp.config.sdc.serviceUrl=http://sdc.api.simpledemo.onap.org:8080/sdc/v1/catalog/services
 clamp.config.sdc.serviceUsername=clamp
 clamp.config.sdc.servicePassword=b7acccda32b98c5bb7acccda32b98c5b05D511BD6D93626E90D18E9D24D9B78CD34C7EE8012F0A189A28763E82271E50A5D4EC10C7D93E06E0A2D27CAE66B981
 clamp.config.sdc.artifactLabel=blueprintclampcockpit
 clamp.config.sdc.sdcX-InstanceID=CLAMP
 clamp.config.sdc.artifactType=DCAE_INVENTORY_BLUEPRINT
 clamp.config.sdc.locationArtifactLabel=locationclampcockpit
 clamp.config.sdc.locationArtifactType=DCAE_INVENTORY_JSON
 clamp.config.sdc.InstanceID=X-ECOMP-InstanceID
 clamp.config.sdc.header.requestId = X-ECOMP-RequestID
 #
 #
 clamp.config.ui.location.default=classpath:/clds/templates/ui-location-default.json
 clamp.config.ui.alarm.default=classpath:/clds/templates/ui-alarm-default.json
 #
 # if action.test.override is true, then any action will be marked as test=true (even if incoming action request had test=false); otherwise, test flag will be unchanged on the action request
 clamp.config.action.test.override=false
 # if action.insert.test.event is true, then insert event even if the action is set to test
 clamp.config.action.insert.test.event=false
 clamp.config.clds.service.cache.invalidate.after.seconds=120

 #DCAE Inventory Url Properties
 clamp.config.dcae.inventory.url=http://dcae.api.simpledemo.onap.org:8080

 #DCAE Dispatcher Url Properties
 clamp.config.dcae.dispatcher.url=http://dcae.api.simpledemo.onap.org:8080
 clamp.config.dcae.header.requestId = X-ECOMP-RequestID

 #Define user permission related parameters, the permission type can be changed but MUST be redefined in clds-users.properties in that case !
 clamp.config.security.permission.type.cl=permission-type-cl
 clamp.config.security.permission.type.cl.manage=permission-type-cl-manage
 clamp.config.security.permission.type.cl.event=permission-type-cl-event
 clamp.config.security.permission.type.filter.vf=permission-type-filter-vf
 clamp.config.security.permission.type.template=permission-type-template
 #This one indicates the type of instances (dev|prod|perf...), this must be set accordingly in clds-users.properties
 clamp.config.security.permission.instance=dev
	###
	# ============LICENSE_START=======================================================
	# ONAP CLAMP
	# ================================================================================
	# Copyright (C) 2017-2018 AT&T Intellectual Property. All rights
	# reserved.
	# ================================================================================
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	# ============LICENSE_END============================================
	# ===================================================================
	# ECOMP is a trademark and service mark of AT&T Intellectual Property.
	###

	info.build.artifact=@project.artifactId@
	info.build.name=@project.name@
	info.build.description=@project.description@
	info.build.version=@project.version@

	### Set the port for HTTP or HTTPS protocol (Controlled by Spring framework, only one at a time).
	### (See below for the parameter 'server.http.port' if you want to have both enabled)
	### To have only HTTP, keep the lines server.ssl.* commented
	### To have only HTTPS enabled, uncomment the server.ssl.* lines and specify a right keystore location
	server.port=8080
	### Settings for HTTPS (this automatically enables the HTTPS on the port 'server.port')
	#server.ssl.key-store=file:/tmp/mykey.jks
	#server.ssl.key-store-password=pass
	#server.ssl.key-password=pass

	### In order to be user friendly when HTTPS is enabled,
	### you can add another HTTP port that will be automatically redirected to HTTPS
	### by enabling this parameter (server.http.port) and set it to another port (80 or 8080, 8090, etc ...)
	#server.http-to-https-redirection.port=8090

	### HTTP Example:
	###--------------
	### server.port=8080

	### HTTPS Example:
	### --------------
	### server.port=8443
	### server.ssl.key-store=file:/tmp/mykey.jks
	### server.ssl.key-store-password=mypass
	### server.ssl.key-password=mypass

	### HTTP (Redirected to HTTPS) and HTTPS Example:
	### --------------------------------------------
	### server.port=8443 <-- The HTTPS port
	### server.ssl.key-store=file:/tmp/mykey.jks
	### server.ssl.key-store-password=mypass
	### server.ssl.key-password=mypass
	### server.http-to-https-redirection.port=8090 <-- The HTTP port

	server.contextPath=/
	#Modified engine-rest applicationpath
	spring.profiles.active=clamp-default,clamp-spring-authentication

	#The max number of active threads in this pool
	server.tomcat.max-threads=200
	#The minimum number of threads always kept alive
	server.tomcat.min-Spare-Threads=25
	#The number of milliseconds before an idle thread shutsdown, unless the number of active threads are less or equal to minSpareThreads
	server.tomcat.max-idle-time=60000

	#Servlet context parameters
	server.context_parameters.p-name=value #context parameter with p-name as key and value as value.

	camel.springboot.consumer-template-cache-size=1000
	camel.springboot.producer-template-cache-size=1000
	camel.springboot.jmx-enabled=false
	camel.defaultthreadpool.poolsize=10
	camel.defaultthreadpool.maxpoolsize=20
	camel.defaultthreadpool.maxqueuesize=1000
	camel.defaultthreadpool.keepaliveTime=60
	camel.defaultthreadpool.rejectpolicy=CallerRuns
	#camel.springboot.xmlRoutes = false
	camel.springboot.xmlRoutes=classpath:/clds/camel/*.xml
	#camel.springboot.typeConversion = false

	#clds datasource connection details
	spring.datasource.cldsdb.driverClassName=org.mariadb.jdbc.Driver
	spring.datasource.cldsdb.url=jdbc:mariadb:sequential://localhost:${docker.mariadb.port.host}/cldsdb4?autoReconnect=true&connectTimeout=10000&socketTimeout=10000&retriesAllDown=3
	spring.datasource.cldsdb.username=clds
	spring.datasource.cldsdb.password=4c90a0b48204383f4283448d23e0b885a47237b2a23588e7c4651604f51c1067
	spring.datasource.cldsdb.validationQuery=SELECT 1
	spring.datasource.cldsdb.validationQueryTimeout=20000
	spring.datasource.cldsdb.validationInterval=30000
	spring.datasource.cldsdb.testWhileIdle = true
	spring.datasource.cldsdb.minIdle = 0
	spring.datasource.cldsdb.initialSize=0
	# Automatically test whether a connection provided is good or not
	spring.datasource.cldsdb.testOnBorrow=true
	spring.datasource.cldsdb.ignoreExceptionOnPreLoad=true

	#Async Executor default Parameters
	async.core.pool.size=10
	async.max.pool.size=20
	async.queue.capacity=500

	org.onap.clamp.config.files.cldsPolicyConfig=classpath:/clds/clds-policy-config.properties
	org.onap.clamp.config.files.cldsUsers=classpath:/clds/clds-users.json
	clamp.config.files.globalProperties=classpath:/clds/templates/globalProperties.json
	org.onap.clamp.config.files.sdcController=classpath:/clds/sdc-controllers-config.json

	# Properties for Clamp
	# DCAE request build properties
	#
	clamp.config.dcae.template=classpath:/clds/templates/dcae-template.json
	clamp.config.dcae.decode.service_ids=classpath:/clds/templates/dcae-decode-service_ids.json
	clamp.config.dcae.deployment.template=classpath:/clds/templates/dcae-deployment-template.json
	#
	# SDC request blueprint properties
	#
	clamp.config.sdc.template=classpath:/clds/templates/sdc-template.json
	clamp.config.sdc.decode.service_ids=classpath:/clds/templates/sdc-decode-service_ids.json
	#
	#
	# General Policy request properties
	#
	clamp.config.policy.onap.name=DCAE
	clamp.config.policy.pdp.group=default
	clamp.config.policy.ms.type=MicroService
	clamp.config.policy.ms.policyNamePrefix=Config_MS_
	clamp.config.policy.op.type=BRMS_Param
	clamp.config.policy.op.policyNamePrefix=Config_BRMS_Param_

	# TCA MicroService Policy request build properties
	#
	clamp.config.tca.policyid.prefix=DCAE.Config_
	clamp.config.tca.policy.template=classpath:/clds/templates/tca-policy-template.json
	clamp.config.tca.template=classpath:/clds/templates/tca-template.json
	clamp.config.tca.thresholds.template=classpath:/clds/templates/tca-thresholds-template.json

	#
	#
	# Operational Policy request build properties
	#
	clamp.config.op.policyDescription=from clds
	# default
	clamp.config.op.templateName=ClosedLoopvUSP
	clamp.config.op.operationTopic=APPC-CL
	clamp.config.op.notificationTopic=POLICY-CL-MGT
	clamp.config.op.controller=amsterdam
	clamp.config.op.policy.appc=APPC
	# by service: vSCP
	clamp.config.op.templateName.vSCP=ClosedLoopTemplate
	clamp.config.op.controller.vSCP=1607-f5fw
	clamp.config.op.eNodeB.templateName=ClosedLoopControlName
	clamp.config.op.eNodeB.operationTopic=com.onap.sdnr.RanCLRequest-v00
	clamp.config.op.eNodeB.notificationTopic=com.onap-policy.IST-ENODEB-CL
	clamp.config.op.eNodeB.controller=amsterdam
	clamp.config.op.eNodeB.recipe=classpath:/clds/templates/op-eNodeB-recipe.json
	clamp.config.op.eNodeB.timeWindow=35
	clamp.config.op.eNodeB.limit=2
	clamp.config.op.eNodeB.period=10s
	#
	# Sdc service properties
	clamp.config.sdc.catalog.url=http://sdc.api.simpledemo.onap.org:8080/sdc/v1/catalog/
	clamp.config.sdc.hostUrl=http://sdc.api.simpledemo.onap.org:8080
	clamp.config.sdc.serviceUrl=http://sdc.api.simpledemo.onap.org:8080/sdc/v1/catalog/services
	clamp.config.sdc.serviceUsername=clamp
	clamp.config.sdc.servicePassword=b7acccda32b98c5bb7acccda32b98c5b05D511BD6D93626E90D18E9D24D9B78CD34C7EE8012F0A189A28763E82271E50A5D4EC10C7D93E06E0A2D27CAE66B981
	clamp.config.sdc.artifactLabel=blueprintclampcockpit
	clamp.config.sdc.sdcX-InstanceID=CLAMP
	clamp.config.sdc.artifactType=DCAE_INVENTORY_BLUEPRINT
	clamp.config.sdc.locationArtifactLabel=locationclampcockpit
	clamp.config.sdc.locationArtifactType=DCAE_INVENTORY_JSON
	clamp.config.sdc.InstanceID=X-ECOMP-InstanceID
	clamp.config.sdc.header.requestId = X-ECOMP-RequestID
	#
	#
	clamp.config.ui.location.default=classpath:/clds/templates/ui-location-default.json
	clamp.config.ui.alarm.default=classpath:/clds/templates/ui-alarm-default.json
	#
	# if action.test.override is true, then any action will be marked as test=true (even if incoming action request had test=false); otherwise, test flag will be unchanged on the action request
	clamp.config.action.test.override=false
	# if action.insert.test.event is true, then insert event even if the action is set to test
	clamp.config.action.insert.test.event=false
	clamp.config.clds.service.cache.invalidate.after.seconds=120

	#DCAE Inventory Url Properties
	clamp.config.dcae.inventory.url=http://dcae.api.simpledemo.onap.org:8080

	#DCAE Dispatcher Url Properties
	clamp.config.dcae.dispatcher.url=http://dcae.api.simpledemo.onap.org:8080
	clamp.config.dcae.header.requestId = X-ECOMP-RequestID

	#Define user permission related parameters, the permission type can be changed but MUST be redefined in clds-users.properties in that case !
	clamp.config.security.permission.type.cl=permission-type-cl
	clamp.config.security.permission.type.cl.manage=permission-type-cl-manage
	clamp.config.security.permission.type.cl.event=permission-type-cl-event
	clamp.config.security.permission.type.filter.vf=permission-type-filter-vf
	clamp.config.security.permission.type.template=permission-type-template
	#This one indicates the type of instances (dev\|prod\|perf...), this must be set accordingly in clds-users.properties
	clamp.config.security.permission.instance=dev