src/test/resources/application-no-camunda.properties - onap/clamp - Gitiles

 ###
 # ============LICENSE_START=======================================================
 # ONAP CLAMP
 # ================================================================================
 # Copyright (C) 2017 AT&T Intellectual Property. All rights
 #                             reserved.
 # ================================================================================
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 # http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 # ============LICENSE_END============================================
 # ===================================================================
 # ECOMP is a trademark and service mark of AT&T Intellectual Property.
 ###

 info.build.artifact=@project.artifactId@
 info.build.name=@project.name@
 info.build.description=@project.description@
 info.build.version=@project.version@

 ### Set the port for HTTP or HTTPS protocol (Controlled by Spring framework, only one at a time).
 ### (See below for the parameter 'server.http.port' if you want to have both enabled)
 ### To have only HTTP, keep the lines server.ssl.* commented
 ### To have only HTTPS enabled, uncomment the server.ssl.* lines and specify a right keystore location
 server.port=10443
 ### Settings for HTTPS (this automatically enables the HTTPS on the port 'server.port')
 server.ssl.key-store=classpath:https/keystore-test.jks
 server.ssl.key-store-password=testpass
 server.ssl.key-password=testpass
 spring.autoconfigure.exclude=com.att.ajsc.camunda.config.CamundaBpmWebappInitializer,com.att.ajsc.camunda.config.CamundaBpmWebappAutoConfiguration
 ### In order to be user friendly when HTTPS is enabled,
 ### you can add another HTTP port that will be automatically redirected to HTTPS
 ### by enabling this parameter (server.http.port) and set it to another port (80 or 8080, 8090, etc ...)
 #server.http-to-https-redirection.port=10080

 ### HTTP Example:
 ###--------------
 ### server.port=8080

 ### HTTPS Example:
 ### --------------
 ### server.port=8443
 ### server.ssl.key-store=file:/tmp/mykey.jks
 ### server.ssl.key-store-password=mypass
 ### server.ssl.key-password=mypass

 ### HTTP (Redirected to HTTPS) and HTTPS Example:
 ### --------------------------------------------
 ### server.port=8443           <-- The HTTPS port
 ### server.ssl.key-store=file:/tmp/mykey.jks
 ### server.ssl.key-store-password=mypass
 ### server.ssl.key-password=mypass
 ### server.http-to-https-redirection.port=8090  <-- The HTTP port

 server.contextPath=/
 #Modified engine-rest applicationpath
 spring.jersey.application-path=/engine-rest
 spring.profiles.active=clamp-default,clamp-spring-authentication
 spring.autoconfigure.exclude=org.springframework.boot.autoconfigure.jdbc.DataSourceAutoConfiguration,org.springframework.boot.autoconfigure.orm.jpa.HibernateJpaAutoConfiguration

 #The max number of active threads in this pool
 server.tomcat.max-threads=200
 #The minimum number of threads always kept alive
 server.tomcat.min-Spare-Threads=25
 #The number of milliseconds before an idle thread shutsdown, unless the number of active threads are less or equal to minSpareThreads
 server.tomcat.max-idle-time=60000


 #Add this properties only if you want to change the URL, AJSC Framework interceptors will intercept
 #com.att.ajsc.common.interceptors.PreInterceptor.url=/**
 #com.att.ajsc.common.interceptors.PostInterceptor.url=/**

 #Servlet context parameters
 server.context_parameters.p-name=value #context parameter with p-name as key and value as value.

 camel.springboot.consumer-template-cache-size=1000
 camel.springboot.producer-template-cache-size=1000
 camel.springboot.jmx-enabled=true
 camel.defaultthreadpool.poolsize=10
 camel.defaultthreadpool.maxpoolsize=20
 camel.defaultthreadpool.maxqueuesize=1000
 camel.defaultthreadpool.keepaliveTime=60
 camel.defaultthreadpool.rejectpolicy=CallerRuns

 kubernetes.namespace=com-att-ajsc

 #server.port=0

 #Camunda Process Engine DataSource connection Details
 spring.datasource.camunda.url=jdbc:mariadb://localhost:${docker.mariadb.port.host}/camundabpm?verifyServerCertificate=false&useSSL=false&requireSSL=false&autoReconnect=true&maxReconnects=100
 spring.datasource.camunda.username=camunda
 spring.datasource.camunda.password=ndMSpw4CAM
 spring.datasource.camunda.driverClassName=org.mariadb.jdbc.Driver
 spring.datasource.camunda.validationQuery=SELECT 1
 spring.datasource.camunda.validationQueryTimeout=20000
 spring.datasource.camunda.validationInterval=60000
 spring.datasource.camunda.testWhileIdle = true
 # Automatically test whether a connection provided is good or not
 spring.datasource.camunda.testOnBorrow=true

 #Camunda application properties
 #Camunda history level
 camunda.bpm.history-level=auto
 camunda.bpm.enabled=false
 camunda.bpm.auto-deployment-enabled=false
 camunda.bpm.job-execution.active=false
 camunda.bpm.job-execution.enabled=false
 camunda.bpm.management.health.camunda.enabled=false
 camunda.bpm.metrics.enabled=false

 #clds datasource connection details
 spring.datasource.cldsdb.driver-class-name=org.mariadb.jdbc.Driver
 spring.datasource.cldsdb.url=jdbc:mariadb://localhost:${docker.mariadb.port.host}/cldsdb4?verifyServerCertificate=false&useSSL=false&requireSSL=false&autoReconnect=true&maxReconnects=100
 spring.datasource.cldsdb.username=clds
 spring.datasource.cldsdb.password=sidnnd83K
 spring.datasource.cldsdb.driverClassName=com.mysql.jdbc.Driver
 spring.datasource.cldsdb.validationQuery=SELECT 1
 spring.datasource.cldsdb.validationQueryTimeout=20000
 spring.datasource.cldsdb.validationInterval=60000
 spring.datasource.cldsdb.testWhileIdle = true
 # Automatically test whether a connection provided is good or not
 spring.datasource.cldsdb.testOnBorrow=true

 #Async Executor default Parameters
 async.core.pool.size=10
 async.max.pool.size=20
 async.queue.capacity=500

 org.onap.clamp.config.dcae.url=http://localhost:9000/closedloop-dcae-services

 #GRM Edge endpoint details
 service.name=ajsc6camundademo
 service.version=1.0.0.0
 routeoffer=TEST
 #Update with your application name
 application.name=AJSC6CAMUNDA

 org.onap.clamp.config.files.cldsReference=classpath:/clds/clds-reference.properties
 org.onap.clamp.config.files.cldsPolicyConfig=classpath:/clds/clds-policy-config.properties
 org.onap.clamp.config.files.cldsUsers=classpath:/clds/clds-users.json
 org.onap.clamp.config.files.globalClds=classpath:/clds/globalClds.properties

 #Define user permission related parameters, the permission type can be changed but MUST be redefined in clds-users.properties in that case !
 CLDS_PERMISSION_TYPE_CL=permission-type-cl
 CLDS_PERMISSION_TYPE_CL_MANAGE=permission-type-cl-manage
 CLDS_PERMISSION_TYPE_CL_EVENT=permission-type-cl-event
 CLDS_PERMISSION_TYPE_FILTER_VF=permission-type-filter-vf
 CLDS_PERMISSION_TYPE_TEMPLATE=permission-type-template
 #This one indicates the type of instances (dev|prod|perf...), this must be set accordingly in clds-users.properties
 CLDS_PERMISSION_INSTANCE=dev
	###
	# ============LICENSE_START=======================================================
	# ONAP CLAMP
	# ================================================================================
	# Copyright (C) 2017 AT&T Intellectual Property. All rights
	# reserved.
	# ================================================================================
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	# ============LICENSE_END============================================
	# ===================================================================
	# ECOMP is a trademark and service mark of AT&T Intellectual Property.
	###

	info.build.artifact=@project.artifactId@
	info.build.name=@project.name@
	info.build.description=@project.description@
	info.build.version=@project.version@

	### Set the port for HTTP or HTTPS protocol (Controlled by Spring framework, only one at a time).
	### (See below for the parameter 'server.http.port' if you want to have both enabled)
	### To have only HTTP, keep the lines server.ssl.* commented
	### To have only HTTPS enabled, uncomment the server.ssl.* lines and specify a right keystore location
	server.port=10443
	### Settings for HTTPS (this automatically enables the HTTPS on the port 'server.port')
	server.ssl.key-store=classpath:https/keystore-test.jks
	server.ssl.key-store-password=testpass
	server.ssl.key-password=testpass
	spring.autoconfigure.exclude=com.att.ajsc.camunda.config.CamundaBpmWebappInitializer,com.att.ajsc.camunda.config.CamundaBpmWebappAutoConfiguration
	### In order to be user friendly when HTTPS is enabled,
	### you can add another HTTP port that will be automatically redirected to HTTPS
	### by enabling this parameter (server.http.port) and set it to another port (80 or 8080, 8090, etc ...)
	#server.http-to-https-redirection.port=10080

	### HTTP Example:
	###--------------
	### server.port=8080

	### HTTPS Example:
	### --------------
	### server.port=8443
	### server.ssl.key-store=file:/tmp/mykey.jks
	### server.ssl.key-store-password=mypass
	### server.ssl.key-password=mypass

	### HTTP (Redirected to HTTPS) and HTTPS Example:
	### --------------------------------------------
	### server.port=8443 <-- The HTTPS port
	### server.ssl.key-store=file:/tmp/mykey.jks
	### server.ssl.key-store-password=mypass
	### server.ssl.key-password=mypass
	### server.http-to-https-redirection.port=8090 <-- The HTTP port

	server.contextPath=/
	#Modified engine-rest applicationpath
	spring.jersey.application-path=/engine-rest
	spring.profiles.active=clamp-default,clamp-spring-authentication
	spring.autoconfigure.exclude=org.springframework.boot.autoconfigure.jdbc.DataSourceAutoConfiguration,org.springframework.boot.autoconfigure.orm.jpa.HibernateJpaAutoConfiguration

	#The max number of active threads in this pool
	server.tomcat.max-threads=200
	#The minimum number of threads always kept alive
	server.tomcat.min-Spare-Threads=25
	#The number of milliseconds before an idle thread shutsdown, unless the number of active threads are less or equal to minSpareThreads
	server.tomcat.max-idle-time=60000


	#Add this properties only if you want to change the URL, AJSC Framework interceptors will intercept
	#com.att.ajsc.common.interceptors.PreInterceptor.url=/**
	#com.att.ajsc.common.interceptors.PostInterceptor.url=/**

	#Servlet context parameters
	server.context_parameters.p-name=value #context parameter with p-name as key and value as value.

	camel.springboot.consumer-template-cache-size=1000
	camel.springboot.producer-template-cache-size=1000
	camel.springboot.jmx-enabled=true
	camel.defaultthreadpool.poolsize=10
	camel.defaultthreadpool.maxpoolsize=20
	camel.defaultthreadpool.maxqueuesize=1000
	camel.defaultthreadpool.keepaliveTime=60
	camel.defaultthreadpool.rejectpolicy=CallerRuns

	kubernetes.namespace=com-att-ajsc

	#server.port=0

	#Camunda Process Engine DataSource connection Details
	spring.datasource.camunda.url=jdbc:mariadb://localhost:${docker.mariadb.port.host}/camundabpm?verifyServerCertificate=false&useSSL=false&requireSSL=false&autoReconnect=true&maxReconnects=100
	spring.datasource.camunda.username=camunda
	spring.datasource.camunda.password=ndMSpw4CAM
	spring.datasource.camunda.driverClassName=org.mariadb.jdbc.Driver
	spring.datasource.camunda.validationQuery=SELECT 1
	spring.datasource.camunda.validationQueryTimeout=20000
	spring.datasource.camunda.validationInterval=60000
	spring.datasource.camunda.testWhileIdle = true
	# Automatically test whether a connection provided is good or not
	spring.datasource.camunda.testOnBorrow=true

	#Camunda application properties
	#Camunda history level
	camunda.bpm.history-level=auto
	camunda.bpm.enabled=false
	camunda.bpm.auto-deployment-enabled=false
	camunda.bpm.job-execution.active=false
	camunda.bpm.job-execution.enabled=false
	camunda.bpm.management.health.camunda.enabled=false
	camunda.bpm.metrics.enabled=false

	#clds datasource connection details
	spring.datasource.cldsdb.driver-class-name=org.mariadb.jdbc.Driver
	spring.datasource.cldsdb.url=jdbc:mariadb://localhost:${docker.mariadb.port.host}/cldsdb4?verifyServerCertificate=false&useSSL=false&requireSSL=false&autoReconnect=true&maxReconnects=100
	spring.datasource.cldsdb.username=clds
	spring.datasource.cldsdb.password=sidnnd83K
	spring.datasource.cldsdb.driverClassName=com.mysql.jdbc.Driver
	spring.datasource.cldsdb.validationQuery=SELECT 1
	spring.datasource.cldsdb.validationQueryTimeout=20000
	spring.datasource.cldsdb.validationInterval=60000
	spring.datasource.cldsdb.testWhileIdle = true
	# Automatically test whether a connection provided is good or not
	spring.datasource.cldsdb.testOnBorrow=true

	#Async Executor default Parameters
	async.core.pool.size=10
	async.max.pool.size=20
	async.queue.capacity=500

	org.onap.clamp.config.dcae.url=http://localhost:9000/closedloop-dcae-services

	#GRM Edge endpoint details
	service.name=ajsc6camundademo
	service.version=1.0.0.0
	routeoffer=TEST
	#Update with your application name
	application.name=AJSC6CAMUNDA

	org.onap.clamp.config.files.cldsReference=classpath:/clds/clds-reference.properties
	org.onap.clamp.config.files.cldsPolicyConfig=classpath:/clds/clds-policy-config.properties
	org.onap.clamp.config.files.cldsUsers=classpath:/clds/clds-users.json
	org.onap.clamp.config.files.globalClds=classpath:/clds/globalClds.properties

	#Define user permission related parameters, the permission type can be changed but MUST be redefined in clds-users.properties in that case !
	CLDS_PERMISSION_TYPE_CL=permission-type-cl
	CLDS_PERMISSION_TYPE_CL_MANAGE=permission-type-cl-manage
	CLDS_PERMISSION_TYPE_CL_EVENT=permission-type-cl-event
	CLDS_PERMISSION_TYPE_FILTER_VF=permission-type-filter-vf
	CLDS_PERMISSION_TYPE_TEMPLATE=permission-type-template
	#This one indicates the type of instances (dev\|prod\|perf...), this must be set accordingly in clds-users.properties
	CLDS_PERMISSION_INSTANCE=dev