diff --git a/docs/sections/configuration.rst b/docs/sections/configuration.rst
index bd2608f..c12da9e 100644
--- a/docs/sections/configuration.rst
+++ b/docs/sections/configuration.rst
@@ -5,26 +5,36 @@
 Configuration
 =============
 
-DACEGEN2 platform is deployed via helm charts. The configuration are maintained as on values.yaml and can be updated for deployment if necessary.
+DACEGEN2 is deployed via helm charts. The configuration are maintained as on values.yaml and can be updated for deployment if necessary.
 
-For Frankfurt release, the helm charts for each platform component can be controlled via separate override file
-https://wiki.onap.org/pages/viewpage.action?pageId=71837415
+The helm charts for each component can be controlled via a separate override file under its respective component under ``oom/kubernetes/dcaegen2-services/components``
 
-
-
+Below is a list of DCAE Services and the corresponding helm chart override location.
 
 .. csv-table::
    :header: "Component", "Charts"
-   :widths: 22,100
+   :widths: 25,100
 
-   "Cloudify", "https://git.onap.org/oom/tree/kubernetes/dcaegen2/components/dcae-cloudify-manager"
-   "ConfigBinding Service", "https://git.onap.org/oom/tree/kubernetes/dcaegen2/components/dcae-config-binding-service"
-   "Deployment Handler", "https://git.onap.org/oom/tree/kubernetes/dcaegen2/components/dcae-deployment-handler"
-   "Policy Handler", "https://git.onap.org/oom/tree/kubernetes/dcaegen2/components/dcae-policy-handler"
-   "ServiceChangeHandler", "https://git.onap.org/oom/tree/kubernetes/dcaegen2/components/dcae-servicechange-handler"
-   "Inventory", "https://git.onap.org/oom/tree/kubernetes/dcaegen2/components/dcae-inventory-api"
-   "Dashboard", "https://git.onap.org/oom/tree/kubernetes/dcaegen2/components/dcae-dashboard"
-   
+   "DataFileCollector", "https://git.onap.org/oom/tree/kubernetes/dcaegen2-services/components/dcae-datafile-collector"
+   "DL AdminUI", "https://git.onap.org/oom/tree/kubernetes/dcaegen2-services/components/dcae-datalake-admin-ui"
+   "DL DES", "https://git.onap.org/oom/tree/kubernetes/dcaegen2-services/components/dcae-datalake-des"
+   "DL Feeder", "https://git.onap.org/oom/tree/kubernetes/dcaegen2-services/components/dcae-datalake-feeder"
+   "Heartbeat mS", "https://git.onap.org/oom/tree/kubernetes/dcaegen2-services/components/dcae-heartbeat"
+   "HV-VES Collector", "https://git.onap.org/oom/tree/kubernetes/dcaegen2-services/components/dcae-hv-ves-collector"
+   "KPI mS", "https://git.onap.org/oom/tree/kubernetes/dcaegen2-services/components/dcae-kpi-ms"
+   "Healthcheck mS", "https://git.onap.org/oom/tree/kubernetes/dcaegen2-services/components/dcae-ms-healthcheck"
+   "PM-Mapper", "https://git.onap.org/oom/tree/kubernetes/dcaegen2-services/components/dcae-pm-mapper"
+   "PMSH", "https://git.onap.org/oom/tree/kubernetes/dcaegen2-services/components/dcae-pmsh"
+   "PRH", "https://git.onap.org/oom/tree/kubernetes/dcaegen2-services/components/dcae-prh"
+   "RestConf Collector", "https://git.onap.org/oom/tree/kubernetes/dcaegen2-services/components/dcae-restconf-collector"
+   "SliceAnalysis mS", "https://git.onap.org/oom/tree/kubernetes/dcaegen2-services/components/dcae-slice-analysis-ms"
+   "SNMPTrap Collector", "https://git.onap.org/oom/tree/kubernetes/dcaegen2-services/components/dcae-snmptrap-collector"
+   "SON-Handler mS", "https://git.onap.org/oom/tree/kubernetes/dcaegen2-services/components/dcae-son-handler"
+   "TCAgen2", "https://git.onap.org/oom/tree/kubernetes/dcaegen2-services/components/dcae-tcagen2"  
+   "VESCollector", "https://git.onap.org/oom/tree/kubernetes/dcaegen2-services/components/dcae-ves-collector" 
+   "VESMapper", "https://git.onap.org/oom/tree/kubernetes/dcaegen2-services/components/dcae-ves-mapper"
+   "VES-OpenAPIManager", "https://git.onap.org/oom/tree/kubernetes/dcaegen2-services/components/dcae-ves-openapi-manager"
+
 
 
 Deployment time configuration of DCAE components are defined in several places.
@@ -38,54 +48,15 @@
      * In a Helm chart hierarchy, values defined in values.yaml files in higher level supersedes values defined in values.yaml files in lower level;
      * Helm command line supplied values supersedes values defined in any values.yaml files.
 
-In addition, for DCAE components deployed through Cloudify Manager blueprints, their configuration parameters are defined in the following places:
 
-     * The blueprint files can contain static values for configuration parameters;
-        * The blueprint files are defined under the ``blueprints`` directory of the ``dcaegen2/platform/blueprints`` repo, named with "k8s" prefix.
-     * The blueprint files can specify input parameters and the values of these parameters will be used for configuring parameters in Blueprints.  The values for these input parameters can be supplied in several ways as listed below in the order of precedence (low to high):
-        * The blueprint files can define default values for the input parameters;
-        * The blueprint input files can contain static values for input parameters of blueprints.  These input files are provided as config resources under the dcae-bootstrap chart;
-        * The blueprint input files may contain Helm templates, which are resolved into actual deployment time values following the rules for Helm values.
+All DCAE Service components are deployed only via Helm. Instructions for deployment and configuration are documented under https://docs.onap.org/projects/onap-dcaegen2/en/latest/sections/services/serviceindex.html
 
 
-DCAE Service components are deployed via Cloudify Blueprints. Instruction for deployment and configuration are documented under https://docs.onap.org/projects/onap-dcaegen2/en/latest/sections/services/serviceindex.html
-
-Now we walk through an example, how to configure the Docker image for the DCAE VESCollector, which is deployed by Cloudify Manager.
-
-In the  `k8s-ves.yaml <https://git.onap.org/dcaegen2/platform/blueprints/tree/blueprints/k8s-ves.yaml>`_ blueprint, the Docker image to use is defined as an input parameter with a default value:
-
-.. code-block:: yaml
-
-    tag_version:
-    type: string
-    default: "nexus3.onap.org:10001/onap/org.onap.dcaegen2.collectors.ves.vescollector:1.5.4"
-    
-The corresponding input file, ``https://git.onap.org/oom/tree/kubernetes/dcaegen2/components/dcae-bootstrap/resources/inputs/k8s-ves-inputs-tls.yaml``,
-it is defined again as:
-
-.. code-block:: yaml
-
-  {{ if .Values.componentImages.ves }}
-  tag_version: {{ include "common.repository" . }}/{{ .Values.componentImages.ves }}
-  {{ end }}
-  
-
-Thus, when ``common.repository`` and ``componentImages.ves`` are defined in the ``values.yaml`` files,
-their values will be plugged in here and the resulting ``tag_version`` value
-will be passed to the blueprint as the Docker image tag to use instead of the default value in the blueprint.
-
-The ``componentImages.ves`` value is provided in the ``oom/kubernetes/dcaegen2/charts/dcae-bootstrap/values.yaml`` file:
-
-.. code-block:: yaml
-
-  componentImages:
-    ves: onap/org.onap.dcaegen2.collectors.ves.vescollector:1.5.4
-
 Config maps
 -----------
 
-During installation of DCAEGEN2 module two config maps are installed by default: dcae-external-repo-configmap-schema-map and dcae-external-repo-configmap-sa88-rel16.
+During the installation of the DCAEGEN2-SERVICES module, two config maps are installed by default: dcae-external-repo-configmap-schema-map and dcae-external-repo-configmap-sa88-rel16.
 
 Config maps are used by DCAEGEN VES and VES OPEN API components.
 
-Instruction how to generate the content of config maps is described in `README <https://gerrit.onap.org/r/gitweb?p=oom/utils.git;a=blob_plain;f=external-schema-repo-generator/README.md;hb=refs/heads/master>`_ file. 
\ No newline at end of file
+Instruction how to generate the content of config maps is described in `README <https://gerrit.onap.org/r/gitweb?p=oom/utils.git;a=blob_plain;f=external-schema-repo-generator/README.md;hb=refs/heads/master>`_ file.