Revert mvn-lib sourcing from nexus/raw
Change-Id: Ic1e5fc521c737eedc612bd800f3325faadf9144d
Signed-off-by: vv770d <vv770d@att.com>
Issue-ID: DCAEGEN2-2494
Signed-off-by: vv770d <vv770d@att.com>
diff --git a/mvn-phase-lib.sh b/mvn-phase-lib.sh
deleted file mode 100644
index 938c93d..0000000
--- a/mvn-phase-lib.sh
+++ /dev/null
@@ -1,541 +0,0 @@
-#!/bin/bash
-
-# ================================================================================
-# Copyright (c) 2017-2021 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-
-
-#MVN_PROJECT_MODULEID="$1"
-#MVN_PHASE="$2"
-#PROJECT_ROOT=$(dirname $0)
-
-FQDN="${MVN_PROJECT_GROUPID}.${MVN_PROJECT_ARTIFACTID}"
-if [ "$MVN_PROJECT_MODULEID" == "__" ]; then
- MVN_PROJECT_MODULEID=""
-fi
-
-if [[ "$MVN_PROJECT_VERSION" == *SNAPSHOT ]]; then
- echo "=> for SNAPSHOT artifact build"
- MVN_DEPLOYMENT_TYPE='SNAPSHOT'
-else
- echo "=> for STAGING/RELEASE artifact build"
- MVN_DEPLOYMENT_TYPE='STAGING'
-fi
-echo "MVN_DEPLOYMENT_TYPE is [$MVN_DEPLOYMENT_TYPE]"
-
-
-TIMESTAMP=$(date +%C%y%m%dT%H%M%S)
-
-# expected environment variables
-if [ -z "${MVN_NEXUSPROXY}" ]; then
- echo "MVN_NEXUSPROXY environment variable not set. Cannot proceed"
- exit
-fi
-MVN_NEXUSPROXY_HOST=$(echo "$MVN_NEXUSPROXY" |cut -f3 -d'/' | cut -f1 -d':')
-echo "=> Nexus Proxy at $MVN_NEXUSPROXY_HOST, $MVN_NEXUSPROXY"
-
-if [ -z "$WORKSPACE" ]; then
- WORKSPACE=$(pwd)
-fi
-
-export SETTINGS_FILE=${SETTINGS_FILE:-$HOME/.m2/settings.xml}
-
-RELEASE_TAG=${MVN_RELEASE_TAG:-R8}
-if [ "$RELEASE_TAG" == "R1" ]; then
- unset RELEASE_TAG
-fi
-
-
-# mvn phase in life cycle
-MVN_PHASE="$2"
-
-echo "MVN_RELEASE_TAG is [$MVN_RELEASE_TAG]"
-echo "MVN_PROJECT_MODULEID is [$MVN_PROJECT_MODULEID]"
-echo "MVN_PHASE is [$MVN_PHASE]"
-echo "MVN_PROJECT_GROUPID is [$MVN_PROJECT_GROUPID]"
-echo "MVN_PROJECT_ARTIFACTID is [$MVN_PROJECT_ARTIFACTID]"
-echo "MVN_PROJECT_VERSION is [$MVN_PROJECT_VERSION]"
-echo "MVN_NEXUSPROXY is [$MVN_NEXUSPROXY]"
-echo "MVN_RAWREPO_BASEURL_UPLOAD is [$MVN_RAWREPO_BASEURL_UPLOAD]"
-echo "MVN_RAWREPO_BASEURL_DOWNLOAD is [$MVN_RAWREPO_BASEURL_DOWNLOAD]"
-MVN_RAWREPO_HOST=$(echo "$MVN_RAWREPO_BASEURL_UPLOAD" | cut -f3 -d'/' |cut -f1 -d':')
-echo "MVN_RAWREPO_HOST is [$MVN_RAWREPO_HOST]"
-echo "MVN_RAWREPO_SERVERID is [$MVN_RAWREPO_SERVERID]"
-echo "MVN_DOCKERREGISTRY_SNAPSHOT is [$MVN_DOCKERREGISTRY_SNAPSHOT]"
-echo "MVN_DOCKERREGISTRY_PUBLIC is [$MVN_DOCKERREGISTRY_PUBLIC]"
-echo "MVN_DOCKERREGISTRY_RELEASE is [$MVN_DOCKERREGISTRY_RELEASE]"
-echo "MVN_PYPISERVER_SERVERID [$MVN_PYPISERVER_SERVERID]"
-echo "MVN_PYPISERVER_BASEURL is [$MVN_PYPISERVER_BASEURL]"
-
-
-
-clean_templated_files()
-{
- TEMPLATE_FILES=$(find . -name "*-template")
- for F in $TEMPLATE_FILES; do
- F2=$(echo "$F" | sed 's/-template$//')
- rm -f "$F2"
- done
-}
-clean_tox_files()
-{
- TOX_FILES=$(find . -name ".tox")
- TOX_FILES="$TOX_FILES $(find . -name 'venv-tox')"
- for F in $TOX_FILES; do
- rm -rf "$F"
- done
-}
-
-expand_templates()
-{
- set +x
- # set up env variables, get ready for template resolution
-
- if [ -z "$RELEASE_TAG" ]; then
- export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/releases"
- export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/snapshots"
- export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/releases"
- export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/snapshots"
- export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/releases"
- export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/snapshots"
- else
- export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/$RELEASE_TAG"
- export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/$RELEASE_TAG"
- export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/$RELEASE_TAG"
- export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/$RELEASE_TAG"
- export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/$RELEASE_TAG"
- export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/$RELEASE_TAG"
- fi
-
-
- export ONAPTEMPLATE_PYPIURL_org_onap_dcaegen2="${MVN_PYPISERVER_BASEURL}"
-
- # docker registry templates are for poll, so use PUBLIC registry
- export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_releases="${MVN_DOCKERREGISTRY_PUBLIC}"
- export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_snapshots="${MVN_DOCKERREGISTRY_PUBLIC}"
-
- # Mvn repo
- export ONAPTEMPLATE_MVN_org_onap_dcaegen2_analytics_tca_snapshots="${MVN_NEXUSPROXY}/service/local/repositories/snapshots/content/org/onap/dcaegen2/analytics/tca"
- export ONAPTEMPLATE_MVN_org_onap_dcaegen2_analytics_tca_staging="${MVN_NEXUSPROXY}/service/local/repositories/staging/content/org/onap/dcaegen2/analytics/tca"
- export ONAPTEMPLATE_MVN_org_onap_dcaegen2_analytics_tca_releases="${MVN_NEXUSPROXY}/service/local/repositories/releases/content/org/onap/dcaegen2/analytics/tca"
-
-
- export ONAPTEMPLATE_STANDARD_INPUTS_TYPES=" # standard inputs list
- centos7image_id:
- type: string
- ubuntu1604image_id:
- type: string
- flavor_id:
- type: string
- security_group:
- type: string
- public_net:
- type: string
- private_net:
- type: string
- openstack: {}
- keypair:
- type: string
- key_filename:
- type: string
- location_prefix:
- type: string
- location_domain:
- type: string
- codesource_url:
- type: string
- codesource_version:
- type: string"
-
-
- TEMPLATES=$(env |grep ONAPTEMPLATE | sed 's/=.*//' | sort -u)
- if [ -z "$TEMPLATES" ]; then
- echo "No template variables found!"
- return 0
- fi
-
- TEMPLATE_FILES=$(find . -name "*-template")
- for F in $TEMPLATE_FILES; do
- F2=$(echo "$F" | sed 's/-template$//')
- cp -p "$F" "$F2"
- chmod u+w "$F2"
-
- echo "====> Resolving the following template from environment variables "
- echo "$TEMPLATES"
- for KEY in $TEMPLATES; do
- VALUE1=$(eval 'echo "$'"$KEY"'"' | sed 1q)
- VALUE2=$(eval 'echo "$'"$KEY"'"' | sed -e 's/\//\\\//g' -e 's/$/\\/' -e '$s/\\$//')
-
- echo "======> Resolving template $KEY to value $VALUE1 for file $F2"
- sed -i "s/{{[[:space:]]*$KEY[[:space:]]*}}/$VALUE2/g" "$F2"
- done
- done
- echo "====> Done template resolving"
-}
-
-test_templates()
-{
- # make certain that the type references exist
- TMP=$(mktemp)
- trap 'rm -f $TMP' 0 1 2 3 15
-
- echo Verify that all of the import URLs are correct
- find . -name '*-template' | sed -e 's/-template$//' |
- while read file
- do
- egrep '^ - .?https?://' < "$file"
- done | awk '{print $2}' | sed -e 's/"//g' | sort -u |
- while read url
- do
- curl -L -w '%{http_code}' -s -o /dev/null "$url" > "$TMP"
- case $(< "$TMP") in
- 2* ) ;;
- * ) echo ">>>>>>>>>>>>>>>> $url not found <<<<<<<<<<<<<<<<" ;;
- esac
- done
-
- echo Verify that the inputs are correct
- PATH=$PATH:$PWD/check-blueprint-vs-input/bin
- find . -name '*-template' | sed -e 's/-template$//' |
- while read blueprint
- do
- check-blueprint-vs-input -b "$blueprint" -i check-blueprint-vs-input/lib/sample-inputs.yaml || true
- done
-}
-
-
-run_tox_test()
-{
- set -e -x
- CURDIR=$(pwd)
- TOXINIS=$(find . -name "tox.ini")
- for TOXINI in "${TOXINIS[@]}"; do
- DIR=$(echo "$TOXINI" | rev | cut -f2- -d'/' | rev)
- cd "${CURDIR}/${DIR}"
- rm -rf ./venv-tox ./.tox
- python3.9 -m virtualenv ./venv-tox
- source ./venv-tox/bin/activate
- pip install pip==9.0.3
- pip install --upgrade argparse
- pip install tox==2.9.1
- pip freeze
- tox
- deactivate
- rm -rf ./venv-tox ./.tox
- done
-}
-
-build_wagons()
-{
- rm -rf ./*.wgn venv-pkg
- SETUPFILES=$(find . -name "setup.py")
-
- virtualenv ./venv-pkg
- source ./venv-pkg/bin/activate
- pip install --upgrade pip
- pip install wagon
-
- CURDIR=$(pwd)
- for SETUPFILE in $SETUPFILES; do
- PLUGIN_DIR=$(dirname "$SETUPFILE")
- PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
- PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
-
- echo "In $PLUGIN_DIR, build plugin $PLUGIN_NAME, version $PLUGIN_VERSION"
-
- wagon create -r "${PLUGIN_DIR}/requirements.txt" --format tar.gz "${PLUGIN_DIR}"
-
- PKG_FILE_NAMES=( "${PLUGIN_NAME}-${PLUGIN_VERSION}"*.wgn )
- echo Built package: "${PKG_FILE_NAMES[@]}"
- cd "$CURDIR"
- done
-
- deactivate
- rm -rf venv-pkg
-}
-
-build_archives_for_wagons()
-{
- rm -rf ./*.tgz ./*.zip venv-pkg
-
- SETUPFILES=$(find "$(pwd)" -name "setup.py")
- CURDIR=$(pwd)
- for SETUPFILE in $SETUPFILES; do
- PLUGIN_FULL_DIR=$(dirname "$SETUPFILE")
- PLUGIN_BASE_DIR=$(basename "$PLUGIN_FULL_DIR")
- PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
- PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
-
- cd "${PLUGIN_FULL_DIR}"/..
- echo "In $(pwd), build plugin zip $PLUGIN_NAME, version $PLUGIN_VERSION"
-
- zip -r "${PLUGIN_NAME}-${PLUGIN_VERSION}.zip" "./${PLUGIN_BASE_DIR}"
- tar -czvf "${PLUGIN_NAME}-${PLUGIN_VERSION}.tgz" "./${PLUGIN_BASE_DIR}"
-
- echo "Built archives for package ${PLUGIN_NAME}-${PLUGIN_VERSION} at $(pwd)"
- cd "$CURDIR"
- done
-}
-
-
-upload_raw_file()
-{
- # Extract the username and password to the nexus repo from the settings file
- USER=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/username/text()" "$SETTINGS_FILE")
- PASS=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/password/text()" "$SETTINGS_FILE")
- NETRC=$(mktemp)
- echo "machine $MVN_RAWREPO_HOST login $USER password $PASS" > "$NETRC"
-
- REPO="$MVN_RAWREPO_BASEURL_UPLOAD"
-
- OUTPUT_FILE=$1
- EXT=$(echo "$OUTPUT_FILE" | rev |cut -f1 -d '.' |rev)
- if [ "$EXT" == 'yaml' ]; then
- OUTPUT_FILE_TYPE='text/x-yaml'
- elif [ "$EXT" == 'sh' ]; then
- OUTPUT_FILE_TYPE='text/x-shellscript'
- elif [ "$EXT" == 'gz' ]; then
- OUTPUT_FILE_TYPE='application/gzip'
- elif [ "$EXT" == 'tgz' ]; then
- OUTPUT_FILE_TYPE='application/gzip'
- elif [ "$EXT" == 'zip' ]; then
- OUTPUT_FILE_TYPE='application/zip'
- elif [ "$EXT" == 'wgn' ]; then
- OUTPUT_FILE_TYPE='application/gzip'
- else
- OUTPUT_FILE_TYPE='application/octet-stream'
- fi
-
- # for multi module projects, the raw repo path must match with project name, not project + module
- # FQDN is project + module
- # GROUPID is project name
- if [ "$MVN_PROJECT_ARTIFACTID" == "$MVN_PROJECT_MODULEID" ]; then
- PROJECT_NAME=${MVN_PROJECT_GROUPID}
- else
- PROJECT_NAME=${FQDN}
- fi
-
- if [ -z "$RELEASE_TAG" ]; then
- SEND_TO="${REPO}/${PROJECT_NAME}"
- else
- SEND_TO="${REPO}/${PROJECT_NAME}/${RELEASE_TAG}"
- fi
-
- if [ ! -z "$2" ]; then
- SEND_TO="$SEND_TO/$2"
- fi
-
- echo "Sending ${OUTPUT_FILE} to Nexus: ${SEND_TO}"
- curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}-${TIMESTAMP}"
- curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}"
-}
-
-upload_wagon_archives()
-{
- SETUPFILES=$(find "$(pwd)" -name "setup.py")
- CURDIR=$(pwd)
- for SETUPFILE in $SETUPFILES; do
- PLUGIN_FULL_DIR=$(dirname "$SETUPFILE")
- PLUGIN_BASE_DIR=$(basename "$PLUGIN_FULL_DIR")
- PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
- PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
-
- cd "${PLUGIN_FULL_DIR}"/..
- echo "In $(pwd), upload zip archive for $PLUGIN_NAME, version $PLUGIN_VERSION"
- ARCHIVE_FILE_NAME="${PLUGIN_NAME}-${PLUGIN_VERSION}.zip"
- if [ -z "$ARCHIVE_FILE_NAME" ]; then
- echo "!!! No zip archive file found ${ARCHIVE_FILE_NAME}"
- exit -1
- fi
- upload_raw_file "${ARCHIVE_FILE_NAME}" "${PLUGIN_NAME}/${PLUGIN_VERSION}"
-
- echo "In $(pwd), upload tgz archive for $PLUGIN_NAME, version $PLUGIN_VERSION"
- ARCHIVE_FILE_NAME="${PLUGIN_NAME}-${PLUGIN_VERSION}.tgz"
- if [ -z "$ARCHIVE_FILE_NAME" ]; then
- echo "!!! No tgz archive file found ${ARCHIVE_FILE_NAME}"
- exit -1
- fi
- upload_raw_file "${ARCHIVE_FILE_NAME}" "${PLUGIN_NAME}/${PLUGIN_VERSION}"
-
- cd "${CURDIR}"
- done
-}
-
-upload_wagons_and_type_yamls()
-{
- SETUPFILES=$(find . -name "setup.py")
-
- CURDIR=$(pwd)
- for SETUPFILE in $SETUPFILES; do
- PLUGIN_DIR=$(dirname "$SETUPFILE")
- PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
- PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
- PLUGIN_VERSION_MAJOR=$(echo "$PLUGIN_VERSION" | cut -f1 -d'.')
- PLUGIN_VERSION_MAJOR_MINOR=$(echo "$PLUGIN_VERSION" | cut -f1-2 -d'.')
-
- echo "Found setup file in $PLUGIN_DIR, for plugin $PLUGIN_NAME version $PLUGIN_VERSION"
-
- TYPEFILE_NAME=$(grep -R "package_name:[[:space:]]*${PLUGIN_NAME}" | cut -f1 -d ':')
- if [ -z "$TYPEFILE_NAME" ]; then
- echo "!!! No typefile found with matching package name $PLUGIN_NAME"
- exit -1
- fi
- NEWFILENAME="${PLUGIN_NAME}"_types.yaml
- if [ "$TYPEFILE_NAME" != "$NEWFILENAME" ]; then
- echo "copy typefile to standard naming"
- cp -f "$TYPEFILE_NAME" "$NEWFILENAME"
- fi
-
- TYPEFILE_PACKAGE_VERSION=$(grep -R 'package_version' "$TYPEFILE_NAME" |cut -f2 -d ':' |sed -r 's/\s+//g')
- WAGONFILE_NAME=$(ls -1 "${PLUGIN_NAME}"-"${TYPEFILE_PACKAGE_VERSION}"-*.wgn)
- if [ -z "$WAGONFILE_NAME" ]; then
- echo "!!! No wagonfile found with matching package name and version as required in typefile: "
- echo " $TYPEFILE_NAME plugin $PLUGIN_NAME package version ${TYPEFILE_PACKAGE_VERSION}"
- exit -1
- fi
-
- upload_raw_file "${NEWFILENAME}" "${PLUGIN_NAME}/${PLUGIN_VERSION}"
- upload_raw_file "${WAGONFILE_NAME}" "${PLUGIN_NAME}/${PLUGIN_VERSION}"
-
- rm -r "$WAGONFILE_NAME"
- if [ "$TYPEFILE_NAME" != "$NEWFILENAME" ]; then
- rm -f "$NEWFILENAME"
- fi
- done
-}
-
-upload_files_of_extension()
-{
- FILES=$(ls -1 ./*."$1")
- for F in $FILES ; do
- upload_raw_file "$F" "$2"
- done
-}
-upload_files_of_extension_recursively()
-{
- FILES=$(find . -name "*.$1")
- for F in $FILES ; do
- upload_raw_file "$F" "$2"
- done
-}
-
-
-generate_pypirc_then_publish()
-{
- set +x
- USER=$(xpath -e "//servers/server[id='$MVN_PYPISERVER_SERVERID']/username/text()" "$SETTINGS_FILE")
- PASS=$(xpath -e "//servers/server[id='$MVN_PYPISERVER_SERVERID']/password/text()" "$SETTINGS_FILE")
-
- if [[ "$MVN_PYPISERVER_BASEURL" != */ ]]; then
- MVN_PYPISERVER_BASEURL="${MVN_PYPISERVER_BASEURL}/"
- fi
-
-
- cat > ~/.pypirc <<EOL
-[distutils]
-index-servers =
- $MVN_PYPISERVER_SERVERID
-
-[$MVN_PYPISERVER_SERVERID]
-repository: $MVN_PYPISERVER_BASEURL
-username: $USER
-password: $PASS
-EOL
-
- # this may fail if a package of same version exists
- python setup.py sdist register -r "$MVN_PYPISERVER_SERVERID" upload -r "$MVN_PYPISERVER_SERVERID"
- set -x
-}
-
-
-
-# following the https://wiki.onap.org/display/DW/Independent+Versioning+and+Release+Process
-#IndependentVersioningandReleaseProcess-StandardizedDockerTagging
-build_and_push_docker()
-{
- # Old tagging
- #IMAGENAME="onap/${FQDN}.${MVN_PROJECT_MODULEID}"
- # new tagging
- ENDID=$(echo $FQDN | rev | cut -f1 -d '.' |rev)
- if [ "$ENDID" == "${MVN_PROJECT_MODULEID}" ]; then
- #IMAGENAME="onap/${FQDN/org.onap./}"
- IMAGENAME="onap/${FQDN}"
- else
- #IMAGENAME="onap/${FQDN/org.onap./}.${MVN_PROJECT_MODULEID}"
- IMAGENAME="onap/${FQDN}.${MVN_PROJECT_MODULEID}"
- fi
-
- IMAGENAME=$(echo "$IMAGENAME" | sed -e 's/_*$//g' -e 's/\.*$//g')
- IMAGENAME=$(echo "$IMAGENAME" | tr '[:upper:]' '[:lower:]')
-
- # use the major and minor version of the MVN artifact version as docker image version
- VERSION="${MVN_PROJECT_VERSION//[^0-9.]/}"
- VERSION2=$(echo "$VERSION" | cut -f1-2 -d'.')
-
- LFQI="${IMAGENAME}:${VERSION}-${TIMESTAMP}"Z
- # build a docker image
- docker build --rm -f ./Dockerfile -t "${LFQI}" ./
-
- # all local builds push to SNAPSHOT repo
- REPO=""
- if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then
- REPO=$MVN_DOCKERREGISTRY_SNAPSHOT
- elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then
- REPO=$MVN_DOCKERREGISTRY_SNAPSHOT
- else
- echo "Fail to determine DEPLOYMENT_TYPE"
- REPO=$MVN_DOCKERREGISTRY_SNAPSHOT
- fi
- echo "DEPLOYMENT_TYPE is: $MVN_DEPLOYMENT_TYPE, repo is $REPO"
-
- if [ ! -z "$REPO" ]; then
- USER=$(xpath -e "//servers/server[id='$REPO']/username/text()" "$SETTINGS_FILE")
- PASS=$(xpath -e "//servers/server[id='$REPO']/password/text()" "$SETTINGS_FILE")
- if [ -z "$USER" ]; then
- echo "Error: no user provided"
- fi
- if [ -z "$PASS" ]; then
- echo "Error: no password provided"
- fi
- [ -z "$PASS" ] && PASS_PROVIDED="<empty>" || PASS_PROVIDED="<password>"
- echo docker login "$REPO" -u "$USER" -p "$PASS_PROVIDED"
-
- set +x
- docker login "$REPO" -u "$USER" -p "$PASS"
- set -x
-
- # local tag is imagename:version-timestamp
- OLDTAG="${LFQI}"
- # three tags are pushed:
- # {imagename}:{semver}-SNAPSHOT-{timestamp}Z this is what CIMAN-132 asks
- # {imagename}:{semver} latest of current version, for testing
- # {imagename}:latest latest of all, used mainly by csit
- # LFQI="${IMAGENAME}:${VERSION}-${TIMESTAMP}"Z
-
-
-
- # Updating tags for ${REPO}/${IMAGENAME}:${VERSION} to include STAGING-latest; and adding new tag for major:minor-STAGING-latest
- PUSHTAGS="${REPO}/${IMAGENAME}:${VERSION}-SNAPSHOT-${TIMESTAMP}Z ${REPO}/${IMAGENAME}:${VERSION2}-STAGING-latest ${REPO}/${IMAGENAME}:${VERSION}-STAGING-latest ${REPO}/${IMAGENAME}:latest"
-
- for NEWTAG in ${PUSHTAGS}
- do
- echo "tagging ${OLDTAG} to ${NEWTAG}"
- docker tag "${OLDTAG}" "${NEWTAG}"
- echo "pushing ${NEWTAG}"
- docker push "${NEWTAG}"
- OLDTAG="${NEWTAG}"
- done
- fi
-}
diff --git a/mvn-phase-script.sh b/mvn-phase-script.sh
index 489a3b4..34dcc3e 100755
--- a/mvn-phase-script.sh
+++ b/mvn-phase-script.sh
@@ -36,12 +36,12 @@
RELEASE_TAGGED_DIR=""
fi
-source "${PROJECT_ROOT}"/mvn-phase-lib.sh
-#if ! wget -O ${PROJECT_ROOT}/mvn-phase-lib.sh \
-# "$MVN_RAWREPO_BASEURL_DOWNLOAD"/org.onap.dcaegen2.utils/${RELEASE_TAGGED_DIR}scripts/mvn-phase-lib.sh; then
-# echo "Fail to download mvn-phase-lib.sh"
-# exit 1
-#fi
+#source "${PROJECT_ROOT}"/mvn-phase-lib.sh
+if ! wget -O ${PROJECT_ROOT}/mvn-phase-lib.sh \
+ "$MVN_RAWREPO_BASEURL_DOWNLOAD"/org.onap.dcaegen2.utils/${RELEASE_TAGGED_DIR}scripts/mvn-phase-lib.sh; then
+ echo "Fail to download mvn-phase-lib.sh"
+ exit 1
+fi
source ./mvn-phase-lib.sh