mvn-phase-lib.sh - onap/dcaegen2/deployments - Gitiles


 #!/bin/bash
 # -*- indent-tabs-mode: nil -*- # vi: set expandtab:
 # ================================================================================
 # Copyright (c) 2017-2022 AT&T Intellectual Property. All rights reserved.
 # ================================================================================
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #     http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 # ============LICENSE_END=========================================================
 #MVN_PROJECT_MODULEID="$1"
 #MVN_PHASE="$2"
 #PROJECT_ROOT=$(dirname $0)
 FQDN="${MVN_PROJECT_GROUPID}.${MVN_PROJECT_ARTIFACTID}"
 if [ "$MVN_PROJECT_MODULEID" == "__" ]; then
   MVN_PROJECT_MODULEID=""
 fi
 if [[ "$MVN_PROJECT_VERSION" == *SNAPSHOT ]]; then
   echo "=> for SNAPSHOT artifact build"
   MVN_DEPLOYMENT_TYPE='SNAPSHOT'
 else
   echo "=> for STAGING/RELEASE artifact build"
   MVN_DEPLOYMENT_TYPE='STAGING'
 fi
 echo "MVN_DEPLOYMENT_TYPE is             [$MVN_DEPLOYMENT_TYPE]"
 TIMESTAMP=$(date +%C%y%m%dT%H%M%S)
 # expected environment variables
 if [ -z "${MVN_NEXUSPROXY}" ]; then
     echo "MVN_NEXUSPROXY environment variable not set.  Cannot proceed"
     exit
 fi
 MVN_NEXUSPROXY_HOST=$(echo "$MVN_NEXUSPROXY" |cut -f3 -d'/' | cut -f1 -d':')
 echo "=> Nexus Proxy at $MVN_NEXUSPROXY_HOST, $MVN_NEXUSPROXY"
 if [ -z "$WORKSPACE" ]; then
     WORKSPACE=$(pwd)
 fi
 export SETTINGS_FILE=${SETTINGS_FILE:-$HOME/.m2/settings.xml}
 #RELEASE_TAG=${MVN_RELEASE_TAG:-R11}
 #if [ "$RELEASE_TAG" == "R1" ]; then
 #  unset RELEASE_TAG
 #fi
 # mvn phase in life cycle
 MVN_PHASE="$2"
 echo "MVN_RELEASE_TAG is                 [$MVN_RELEASE_TAG]"
 echo "MVN_PROJECT_MODULEID is            [$MVN_PROJECT_MODULEID]"
 echo "MVN_PHASE is                       [$MVN_PHASE]"
 echo "MVN_PROJECT_GROUPID is             [$MVN_PROJECT_GROUPID]"
 echo "MVN_PROJECT_ARTIFACTID is          [$MVN_PROJECT_ARTIFACTID]"
 echo "MVN_PROJECT_VERSION is             [$MVN_PROJECT_VERSION]"
 echo "MVN_NEXUSPROXY is                  [$MVN_NEXUSPROXY]"
 echo "MVN_RAWREPO_BASEURL_UPLOAD is      [$MVN_RAWREPO_BASEURL_UPLOAD]"
 echo "MVN_RAWREPO_BASEURL_DOWNLOAD is    [$MVN_RAWREPO_BASEURL_DOWNLOAD]"
 MVN_RAWREPO_HOST=$(echo "$MVN_RAWREPO_BASEURL_UPLOAD" | cut -f3 -d'/' |cut -f1 -d':')
 echo "MVN_RAWREPO_HOST is                [$MVN_RAWREPO_HOST]"
 echo "MVN_RAWREPO_SERVERID is            [$MVN_RAWREPO_SERVERID]"
 echo "MVN_DOCKERREGISTRY_SNAPSHOT is     [$MVN_DOCKERREGISTRY_SNAPSHOT]"
 echo "MVN_DOCKERREGISTRY_PUBLIC is       [$MVN_DOCKERREGISTRY_PUBLIC]"
 echo "MVN_DOCKERREGISTRY_RELEASE is      [$MVN_DOCKERREGISTRY_RELEASE]"
 echo "MVN_PYPISERVER_SERVERID            [$MVN_PYPISERVER_SERVERID]"
 echo "MVN_PYPISERVER_BASEURL is          [$MVN_PYPISERVER_BASEURL]"
 clean_templated_files()
 {
   TEMPLATE_FILES=$(find . -name "*-template")
   for F in $TEMPLATE_FILES; do
     F2=$(echo "$F" | sed 's/-template$//')
     rm -f "$F2"
   done
 }
 clean_tox_files()
 {
   TOX_FILES=$(find . -name ".tox")
   TOX_FILES="$TOX_FILES $(find . -name 'venv-tox')"
   for F in $TOX_FILES; do
     rm -rf "$F"
   done
 }
 expand_templates()
 {
   set +x
   # set up env variables, get ready for template resolution
   # NOTE: CCSDK artifacts do not distinguish REALESE vs SNAPSHOTs
   export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins"
   export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins"
   export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints"
   export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints"
   if [ -z "$RELEASE_TAG" ]; then
     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/releases"
     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/snapshots"
     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/releases"
     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/snapshots"
     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/releases"
     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/snapshots"
   else
     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/$RELEASE_TAG"
     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/$RELEASE_TAG"
     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/$RELEASE_TAG"
     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/$RELEASE_TAG"
     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/$RELEASE_TAG"
     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/$RELEASE_TAG"
   fi
   export ONAPTEMPLATE_PYPIURL_org_onap_dcaegen2="${MVN_PYPISERVER_BASEURL}"
   # docker registry templates are for poll, so use PUBLIC registry
   export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_releases="${MVN_DOCKERREGISTRY_PUBLIC}"
   export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_snapshots="${MVN_DOCKERREGISTRY_PUBLIC}"
   # Mvn repo
   export ONAPTEMPLATE_MVN_org_onap_dcaegen2_analytics_tca_snapshots="${MVN_NEXUSPROXY}/service/local/repositories/snapshots/content/org/onap/dcaegen2/analytics/tca"
   export ONAPTEMPLATE_MVN_org_onap_dcaegen2_analytics_tca_staging="${MVN_NEXUSPROXY}/service/local/repositories/staging/content/org/onap/dcaegen2/analytics/tca"
   export ONAPTEMPLATE_MVN_org_onap_dcaegen2_analytics_tca_releases="${MVN_NEXUSPROXY}/service/local/repositories/releases/content/org/onap/dcaegen2/analytics/tca"
   export ONAPTEMPLATE_STANDARD_INPUTS_TYPES="  # standard inputs list
   centos7image_id:
     type: string
   ubuntu1604image_id:
     type: string
   flavor_id:
     type: string
   security_group:
     type: string
   public_net:
     type: string
   private_net:
     type: string
   openstack: {}
   keypair:
     type: string
   key_filename:
     type: string
   location_prefix:
     type: string
   location_domain:
     type: string
   codesource_url:
     type: string
   codesource_version:
     type: string"
   TEMPLATES=$(env |grep ONAPTEMPLATE | sed 's/=.*//' | sort -u)
   if [ -z "$TEMPLATES" ]; then
     echo "No template variables found!"
     return 0
   fi
   TEMPLATE_FILES=$(find . -name "*-template")
   for F in $TEMPLATE_FILES; do
     F2=$(echo "$F" | sed 's/-template$//')
     cp -p "$F" "$F2"
     chmod u+w "$F2"

     echo "====> Resolving the following template from environment variables "
     echo "$TEMPLATES"
     for KEY in $TEMPLATES; do
       VALUE1=$(eval 'echo "$'"$KEY"'"' | sed 1q)
       VALUE2=$(eval 'echo "$'"$KEY"'"' | sed -e 's/\//\\\//g' -e 's/$/\\/' -e '$s/\\$//')
       echo "======> Resolving template $KEY to value $VALUE1 for file $F2"
       sed -i "s/{{[[:space:]]*$KEY[[:space:]]*}}/$VALUE2/g" "$F2"
     done
   done
   echo "====> Done template resolving"
 }
 test_templates()
 {
     # make certain that the type references exist
     TMP=$(mktemp)
     trap 'rm -f $TMP' 0 1 2 3 15
     echo Verify that all of the import URLs are correct
     find . -name '*-template' | sed -e 's/-template$//' |
     while read file
     do
         egrep '^  - .?https?://' < "$file"
     done  | awk '{print $2}' | sed -e 's/"//g' | sort -u |
     while read url
     do
         curl -L -w '%{http_code}' -s -o /dev/null "$url" > "$TMP"
         case $(< "$TMP") in
             2* ) ;;
             * ) echo ">>>>>>>>>>>>>>>> $url not found <<<<<<<<<<<<<<<<" ;;
         esac
     done
     echo Verify that the inputs are correct
     PATH=$PATH:$PWD/check-blueprint-vs-input/bin
     find . -name '*-template' | sed -e 's/-template$//' |
     while read blueprint
     do
         check-blueprint-vs-input -b "$blueprint" -i check-blueprint-vs-input/lib/sample-inputs.yaml || true
     done
 }
 run_tox_test()
 {
   set -e -x
   CURDIR=$(pwd)
   TOXINIS=$(find . -name "tox.ini")
   for TOXINI in "${TOXINIS[@]}"; do
     DIR=$(dirname "$TOXINI")
     cd "${CURDIR}/${DIR}"
     rm -rf ./venv-tox ./.tox
     python3 -m venv ./venv-tox
     source ./venv-tox/bin/activate
     pip3 install pip==9.0.3
     pip3 install --upgrade argparse
     pip3 install tox==2.9.1
     if [ "$RUN_BLACK" = yes ]
     then
         pip3 install black
         python3 -m black --line-length 120 --check .
     fi
     pip3 freeze
     tox
     deactivate
     rm -rf ./venv-tox ./.tox
   done
 }
 build_wagons()
 {
   rm -rf ./*.wgn venv-pkg
   SETUPFILES=$(find . -name "setup.py")

   python3 -m venv ./venv-pkg
   source ./venv-pkg/bin/activate
   pip3 install --upgrade pip
   pip3 install wagon
   CURDIR=$(pwd)
   for SETUPFILE in $SETUPFILES; do
     PLUGIN_DIR=$(dirname "$SETUPFILE")
     PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
     PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
     echo "In $PLUGIN_DIR, build plugin $PLUGIN_NAME, version $PLUGIN_VERSION"
     wagon create -r "${PLUGIN_DIR}/requirements.txt" --format tar.gz "${PLUGIN_DIR}"
     PKG_FILE_NAMES=( "${PLUGIN_NAME}-${PLUGIN_VERSION}"*.wgn )
     echo Built package: "${PKG_FILE_NAMES[@]}"
     cd "$CURDIR"
   done
   deactivate
   rm -rf venv-pkg
 }
 build_archives_for_wagons()
 {
   rm -rf ./*.tgz ./*.zip venv-pkg

   SETUPFILES=$(find "$(pwd)" -name "setup.py")
   CURDIR=$(pwd)
   for SETUPFILE in $SETUPFILES; do
     PLUGIN_FULL_DIR=$(dirname "$SETUPFILE")
     PLUGIN_BASE_DIR=$(basename "$PLUGIN_FULL_DIR")
     PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
     PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
     cd "${PLUGIN_FULL_DIR}"/..
     echo "In $(pwd), build plugin zip $PLUGIN_NAME, version $PLUGIN_VERSION"
     zip -r "${PLUGIN_NAME}-${PLUGIN_VERSION}.zip" "./${PLUGIN_BASE_DIR}"
     tar -czvf "${PLUGIN_NAME}-${PLUGIN_VERSION}.tgz" "./${PLUGIN_BASE_DIR}"
     echo "Built archives for package ${PLUGIN_NAME}-${PLUGIN_VERSION} at $(pwd)"
     cd "$CURDIR"
   done
 }
 upload_raw_file()
 {
   # Extract the username and password to the nexus repo from the settings file
   USER=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/username/text()" "$SETTINGS_FILE")
   PASS=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/password/text()" "$SETTINGS_FILE")
   NETRC=$(mktemp)
   echo "machine $MVN_RAWREPO_HOST login $USER password $PASS" > "$NETRC"
   REPO="$MVN_RAWREPO_BASEURL_UPLOAD"
   OUTPUT_FILE=$1
   EXT=$(echo "$OUTPUT_FILE" | rev |cut -f1 -d '.' |rev)
   if [ "$EXT" == 'yaml' ]; then
     OUTPUT_FILE_TYPE='text/x-yaml'
   elif [ "$EXT" == 'sh' ]; then
     OUTPUT_FILE_TYPE='text/x-shellscript'
   elif [ "$EXT" == 'gz' ]; then
     OUTPUT_FILE_TYPE='application/gzip'
   elif [ "$EXT" == 'tgz' ]; then
     OUTPUT_FILE_TYPE='application/gzip'
   elif [ "$EXT" == 'zip' ]; then
     OUTPUT_FILE_TYPE='application/zip'
   elif [ "$EXT" == 'wgn' ]; then
     OUTPUT_FILE_TYPE='application/gzip'
   else
     OUTPUT_FILE_TYPE='application/octet-stream'
   fi
   # for multi module projects, the raw repo path must match with project name, not project + module
   # FQDN is project + module
   # GROUPID is project name
   if [ "$MVN_PROJECT_ARTIFACTID" == "$MVN_PROJECT_MODULEID" ]; then
     PROJECT_NAME=${MVN_PROJECT_GROUPID}
   else
     PROJECT_NAME=${FQDN}
   fi
   if [ -z "$RELEASE_TAG" ]; then
     SEND_TO="${REPO}/${PROJECT_NAME}"
   else
     SEND_TO="${REPO}/${PROJECT_NAME}/${RELEASE_TAG}"
   fi

   if [ ! -z "$2" ]; then
     SEND_TO="$SEND_TO/$2"
   fi
   echo "Sending ${OUTPUT_FILE} to Nexus: ${SEND_TO}"
   curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}-${TIMESTAMP}"
   curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}"
 }
 upload_wagon_archives()
 {
   SETUPFILES=$(find "$(pwd)" -name "setup.py")
   CURDIR=$(pwd)
   for SETUPFILE in $SETUPFILES; do
     PLUGIN_FULL_DIR=$(dirname "$SETUPFILE")
     PLUGIN_BASE_DIR=$(basename "$PLUGIN_FULL_DIR")
     PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
     PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
     cd "${PLUGIN_FULL_DIR}"/..
     echo "In $(pwd), upload zip archive for $PLUGIN_NAME, version $PLUGIN_VERSION"
     ARCHIVE_FILE_NAME="${PLUGIN_NAME}-${PLUGIN_VERSION}.zip"
     if [ -z "$ARCHIVE_FILE_NAME" ]; then
       echo "!!! No zip archive file found ${ARCHIVE_FILE_NAME}"
       exit -1
     fi
     upload_raw_file "${ARCHIVE_FILE_NAME}" "${PLUGIN_NAME}/${PLUGIN_VERSION}"
     echo "In $(pwd), upload tgz archive for $PLUGIN_NAME, version $PLUGIN_VERSION"
     ARCHIVE_FILE_NAME="${PLUGIN_NAME}-${PLUGIN_VERSION}.tgz"
     if [ -z "$ARCHIVE_FILE_NAME" ]; then
       echo "!!! No tgz archive file found ${ARCHIVE_FILE_NAME}"
       exit -1
     fi
     upload_raw_file "${ARCHIVE_FILE_NAME}" "${PLUGIN_NAME}/${PLUGIN_VERSION}"
     cd "${CURDIR}"
   done
 }
 upload_wagons_and_type_yamls()
 {
   SETUPFILES=$(find . -name "setup.py")
   CURDIR=$(pwd)
   for SETUPFILE in $SETUPFILES; do
     PLUGIN_DIR=$(dirname "$SETUPFILE")
     PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
     PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
     PLUGIN_VERSION_MAJOR=$(echo "$PLUGIN_VERSION" | cut -f1 -d'.')
     PLUGIN_VERSION_MAJOR_MINOR=$(echo "$PLUGIN_VERSION" | cut -f1-2 -d'.')
     echo "Found setup file in $PLUGIN_DIR, for plugin $PLUGIN_NAME version $PLUGIN_VERSION"
     TYPEFILE_NAME=$(grep -R "package_name:[[:space:]]*${PLUGIN_NAME}" | cut -f1 -d ':')
     if [ -z "$TYPEFILE_NAME" ]; then
       echo "!!! No typefile found with matching package name $PLUGIN_NAME"
       exit -1
     fi
     NEWFILENAME="${PLUGIN_NAME}"_types.yaml
     if [ "$TYPEFILE_NAME" != "$NEWFILENAME" ]; then
       echo "copy typefile to standard naming"
       cp -f "$TYPEFILE_NAME" "$NEWFILENAME"
     fi
     TYPEFILE_PACKAGE_VERSION=$(grep -R 'package_version' "$TYPEFILE_NAME" |cut -f2 -d ':' |sed -r 's/\s+//g')
     WAGONFILE_NAME=$(ls -1 "${PLUGIN_NAME}"-"${TYPEFILE_PACKAGE_VERSION}"-*.wgn)
     if [ -z "$WAGONFILE_NAME" ]; then
       echo "!!! No wagonfile found with matching package name and version as required in typefile: "
       echo "    $TYPEFILE_NAME plugin $PLUGIN_NAME package version ${TYPEFILE_PACKAGE_VERSION}"
       exit -1
     fi
     upload_raw_file "${NEWFILENAME}" "${PLUGIN_NAME}/${PLUGIN_VERSION}"
     upload_raw_file "${WAGONFILE_NAME}" "${PLUGIN_NAME}/${PLUGIN_VERSION}"

     rm -r "$WAGONFILE_NAME"
     if [ "$TYPEFILE_NAME" != "$NEWFILENAME" ]; then
       rm -f "$NEWFILENAME"
     fi
   done
 }
 upload_files_of_extension()
 {
   FILES=$(ls -1 ./*."$1")
   for F in $FILES ; do
     upload_raw_file "$F" "$2"
   done
 }
 upload_files_of_extension_recursively()
 {
   FILES=$(find . -name "*.$1")
   for F in $FILES ; do
     upload_raw_file "$F" "$2"
   done
 }
 generate_pypirc_then_publish()
 {
   set +x
   USER=$(xpath -e "//servers/server[id='$MVN_PYPISERVER_SERVERID']/username/text()" "$SETTINGS_FILE")
   PASS=$(xpath -e "//servers/server[id='$MVN_PYPISERVER_SERVERID']/password/text()" "$SETTINGS_FILE")
   if [[ "$MVN_PYPISERVER_BASEURL" != */ ]]; then
     MVN_PYPISERVER_BASEURL="${MVN_PYPISERVER_BASEURL}/"
   fi

   cat > ~/.pypirc <<EOL
 [distutils]
 index-servers =
   $MVN_PYPISERVER_SERVERID

 [$MVN_PYPISERVER_SERVERID]
 repository: $MVN_PYPISERVER_BASEURL
 username: $USER
 password: $PASS
 EOL
   # this may fail if a package of same version exists
   python setup.py sdist register -r "$MVN_PYPISERVER_SERVERID" upload -r "$MVN_PYPISERVER_SERVERID"
   set -x
 }
 # following the https://wiki.onap.org/display/DW/Independent+Versioning+and+Release+Process
 #IndependentVersioningandReleaseProcess-StandardizedDockerTagging
 build_and_push_docker()
 {
   # Old tagging
   #IMAGENAME="onap/${FQDN}.${MVN_PROJECT_MODULEID}"
   # new tagging
   ENDID=$(echo $FQDN | rev | cut -f1 -d '.' |rev)
   if [ "$ENDID" == "${MVN_PROJECT_MODULEID}" ]; then
     #IMAGENAME="onap/${FQDN/org.onap./}"
     IMAGENAME="onap/${FQDN}"
   else
     #IMAGENAME="onap/${FQDN/org.onap./}.${MVN_PROJECT_MODULEID}"
     IMAGENAME="onap/${FQDN}.${MVN_PROJECT_MODULEID}"
   fi
   IMAGENAME=$(echo "$IMAGENAME" | sed -e 's/_*$//g' -e 's/\.*$//g')
   IMAGENAME=$(echo "$IMAGENAME" | tr '[:upper:]' '[:lower:]')
   # use the major and minor version of the MVN artifact version as docker image version
   VERSION="${MVN_PROJECT_VERSION//[^0-9.]/}"
   VERSION2=$(echo "$VERSION" | cut -f1-2 -d'.')
   LFQI="${IMAGENAME}:${VERSION}-${TIMESTAMP}"Z
   # build a docker image
   docker build --rm -f ./Dockerfile -t "${LFQI}" ./
   # all local builds push to SNAPSHOT repo
   REPO=""
   if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then
      REPO=$MVN_DOCKERREGISTRY_SNAPSHOT
   elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then
      REPO=$MVN_DOCKERREGISTRY_SNAPSHOT
   else
      echo "Fail to determine DEPLOYMENT_TYPE"
      REPO=$MVN_DOCKERREGISTRY_SNAPSHOT
   fi
   echo "DEPLOYMENT_TYPE is: $MVN_DEPLOYMENT_TYPE, repo is $REPO"
   if [ ! -z "$REPO" ]; then
     USER=$(xpath -e "//servers/server[id='$REPO']/username/text()" "$SETTINGS_FILE")
     PASS=$(xpath -e "//servers/server[id='$REPO']/password/text()" "$SETTINGS_FILE")
     if [ -z "$USER" ]; then
       echo "Error: no user provided"
     fi
     if [ -z "$PASS" ]; then
       echo "Error: no password provided"
     fi
     [ -z "$PASS" ] && PASS_PROVIDED="<empty>" || PASS_PROVIDED="<password>"
     echo docker login "$REPO" -u "$USER" -p "$PASS_PROVIDED"
     set +x
     docker login "$REPO" -u "$USER" -p "$PASS"
     set -x
     # local tag is imagename:version-timestamp
     OLDTAG="${LFQI}"
     # three tags are pushed:
     #   {imagename}:{semver}-SNAPSHOT-{timestamp}Z       this is what CIMAN-132 asks
     #   {imagename}:{semver}                             latest of current version, for testing
     #   {imagename}:latest                               latest of all, used mainly by csit
     # LFQI="${IMAGENAME}:${VERSION}-${TIMESTAMP}"Z
     # Updating tags for ${REPO}/${IMAGENAME}:${VERSION} to include STAGING-latest; and adding new tag for major:minor-STAGING-latest
     PUSHTAGS="${REPO}/${IMAGENAME}:${VERSION}-SNAPSHOT-${TIMESTAMP}Z ${REPO}/${IMAGENAME}:${VERSION2}-STAGING-latest ${REPO}/${IMAGENAME}:${VERSION}-STAGING-latest ${REPO}/${IMAGENAME}:latest"
     for NEWTAG in ${PUSHTAGS}
     do
       echo "tagging ${OLDTAG} to ${NEWTAG}"
       docker tag "${OLDTAG}" "${NEWTAG}"
       echo "pushing ${NEWTAG}"
       docker push "${NEWTAG}"
       OLDTAG="${NEWTAG}"
     done
   fi
 }

	#!/bin/bash
	# -- indent-tabs-mode: nil -- # vi: set expandtab:
	# ================================================================================
	# Copyright (c) 2017-2022 AT&T Intellectual Property. All rights reserved.
	# ================================================================================
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	# ============LICENSE_END=========================================================
	#MVN_PROJECT_MODULEID="$1"
	#MVN_PHASE="$2"
	#PROJECT_ROOT=$(dirname $0)
	FQDN="${MVN_PROJECT_GROUPID}.${MVN_PROJECT_ARTIFACTID}"
	if [ "$MVN_PROJECT_MODULEID" == "__" ]; then
	MVN_PROJECT_MODULEID=""
	fi
	if [[ "$MVN_PROJECT_VERSION" == *SNAPSHOT ]]; then
	echo "=> for SNAPSHOT artifact build"
	MVN_DEPLOYMENT_TYPE='SNAPSHOT'
	else
	echo "=> for STAGING/RELEASE artifact build"
	MVN_DEPLOYMENT_TYPE='STAGING'
	fi
	echo "MVN_DEPLOYMENT_TYPE is [$MVN_DEPLOYMENT_TYPE]"
	TIMESTAMP=$(date +%C%y%m%dT%H%M%S)
	# expected environment variables
	if [ -z "${MVN_NEXUSPROXY}" ]; then
	echo "MVN_NEXUSPROXY environment variable not set. Cannot proceed"
	exit
	fi
	MVN_NEXUSPROXY_HOST=$(echo "$MVN_NEXUSPROXY" \|cut -f3 -d'/' \| cut -f1 -d':')
	echo "=> Nexus Proxy at $MVN_NEXUSPROXY_HOST, $MVN_NEXUSPROXY"
	if [ -z "$WORKSPACE" ]; then
	WORKSPACE=$(pwd)
	fi
	export SETTINGS_FILE=${SETTINGS_FILE:-$HOME/.m2/settings.xml}
	#RELEASE_TAG=${MVN_RELEASE_TAG:-R11}
	#if [ "$RELEASE_TAG" == "R1" ]; then
	# unset RELEASE_TAG
	#fi
	# mvn phase in life cycle
	MVN_PHASE="$2"
	echo "MVN_RELEASE_TAG is [$MVN_RELEASE_TAG]"
	echo "MVN_PROJECT_MODULEID is [$MVN_PROJECT_MODULEID]"
	echo "MVN_PHASE is [$MVN_PHASE]"
	echo "MVN_PROJECT_GROUPID is [$MVN_PROJECT_GROUPID]"
	echo "MVN_PROJECT_ARTIFACTID is [$MVN_PROJECT_ARTIFACTID]"
	echo "MVN_PROJECT_VERSION is [$MVN_PROJECT_VERSION]"
	echo "MVN_NEXUSPROXY is [$MVN_NEXUSPROXY]"
	echo "MVN_RAWREPO_BASEURL_UPLOAD is [$MVN_RAWREPO_BASEURL_UPLOAD]"
	echo "MVN_RAWREPO_BASEURL_DOWNLOAD is [$MVN_RAWREPO_BASEURL_DOWNLOAD]"
	MVN_RAWREPO_HOST=$(echo "$MVN_RAWREPO_BASEURL_UPLOAD" \| cut -f3 -d'/' \|cut -f1 -d':')
	echo "MVN_RAWREPO_HOST is [$MVN_RAWREPO_HOST]"
	echo "MVN_RAWREPO_SERVERID is [$MVN_RAWREPO_SERVERID]"
	echo "MVN_DOCKERREGISTRY_SNAPSHOT is [$MVN_DOCKERREGISTRY_SNAPSHOT]"
	echo "MVN_DOCKERREGISTRY_PUBLIC is [$MVN_DOCKERREGISTRY_PUBLIC]"
	echo "MVN_DOCKERREGISTRY_RELEASE is [$MVN_DOCKERREGISTRY_RELEASE]"
	echo "MVN_PYPISERVER_SERVERID [$MVN_PYPISERVER_SERVERID]"
	echo "MVN_PYPISERVER_BASEURL is [$MVN_PYPISERVER_BASEURL]"
	clean_templated_files()
	{
	TEMPLATE_FILES=$(find . -name "*-template")
	for F in $TEMPLATE_FILES; do
	F2=$(echo "$F" \| sed 's/-template$//')
	rm -f "$F2"
	done
	}
	clean_tox_files()
	{
	TOX_FILES=$(find . -name ".tox")
	TOX_FILES="$TOX_FILES $(find . -name 'venv-tox')"
	for F in $TOX_FILES; do
	rm -rf "$F"
	done
	}
	expand_templates()
	{
	set +x
	# set up env variables, get ready for template resolution
	# NOTE: CCSDK artifacts do not distinguish REALESE vs SNAPSHOTs
	export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins"
	export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins"
	export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints"
	export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints"
	if [ -z "$RELEASE_TAG" ]; then
	export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/releases"
	export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/snapshots"
	export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/releases"
	export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/snapshots"
	export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/releases"
	export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/snapshots"
	else
	export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/$RELEASE_TAG"
	export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/$RELEASE_TAG"
	export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/$RELEASE_TAG"
	export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/$RELEASE_TAG"
	export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/$RELEASE_TAG"
	export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/$RELEASE_TAG"
	fi
	export ONAPTEMPLATE_PYPIURL_org_onap_dcaegen2="${MVN_PYPISERVER_BASEURL}"
	# docker registry templates are for poll, so use PUBLIC registry
	export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_releases="${MVN_DOCKERREGISTRY_PUBLIC}"
	export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_snapshots="${MVN_DOCKERREGISTRY_PUBLIC}"
	# Mvn repo
	export ONAPTEMPLATE_MVN_org_onap_dcaegen2_analytics_tca_snapshots="${MVN_NEXUSPROXY}/service/local/repositories/snapshots/content/org/onap/dcaegen2/analytics/tca"
	export ONAPTEMPLATE_MVN_org_onap_dcaegen2_analytics_tca_staging="${MVN_NEXUSPROXY}/service/local/repositories/staging/content/org/onap/dcaegen2/analytics/tca"
	export ONAPTEMPLATE_MVN_org_onap_dcaegen2_analytics_tca_releases="${MVN_NEXUSPROXY}/service/local/repositories/releases/content/org/onap/dcaegen2/analytics/tca"
	export ONAPTEMPLATE_STANDARD_INPUTS_TYPES=" # standard inputs list
	centos7image_id:
	type: string
	ubuntu1604image_id:
	type: string
	flavor_id:
	type: string
	security_group:
	type: string
	public_net:
	type: string
	private_net:
	type: string
	openstack: {}
	keypair:
	type: string
	key_filename:
	type: string
	location_prefix:
	type: string
	location_domain:
	type: string
	codesource_url:
	type: string
	codesource_version:
	type: string"
	TEMPLATES=$(env \|grep ONAPTEMPLATE \| sed 's/=.*//' \| sort -u)
	if [ -z "$TEMPLATES" ]; then
	echo "No template variables found!"
	return 0
	fi
	TEMPLATE_FILES=$(find . -name "*-template")
	for F in $TEMPLATE_FILES; do
	F2=$(echo "$F" \| sed 's/-template$//')
	cp -p "$F" "$F2"
	chmod u+w "$F2"

	echo "====> Resolving the following template from environment variables "
	echo "$TEMPLATES"
	for KEY in $TEMPLATES; do
	VALUE1=$(eval 'echo "$'"$KEY"'"' \| sed 1q)
	VALUE2=$(eval 'echo "$'"$KEY"'"' \| sed -e 's/\//\\\//g' -e 's/$/\\/' -e '$s/\\$//')
	echo "======> Resolving template $KEY to value $VALUE1 for file $F2"
	sed -i "s/{{[[:space:]]$KEY[[:space:]]}}/$VALUE2/g" "$F2"
	done
	done
	echo "====> Done template resolving"
	}
	test_templates()
	{
	# make certain that the type references exist
	TMP=$(mktemp)
	trap 'rm -f $TMP' 0 1 2 3 15
	echo Verify that all of the import URLs are correct
	find . -name '*-template' \| sed -e 's/-template$//' \|
	while read file
	do
	egrep '^ - .?https?://' < "$file"
	done \| awk '{print $2}' \| sed -e 's/"//g' \| sort -u \|
	while read url
	do
	curl -L -w '%{http_code}' -s -o /dev/null "$url" > "$TMP"
	case $(< "$TMP") in
	2* ) ;;
	* ) echo ">>>>>>>>>>>>>>>> $url not found <<<<<<<<<<<<<<<<" ;;
	esac
	done
	echo Verify that the inputs are correct
	PATH=$PATH:$PWD/check-blueprint-vs-input/bin
	find . -name '*-template' \| sed -e 's/-template$//' \|
	while read blueprint
	do
	check-blueprint-vs-input -b "$blueprint" -i check-blueprint-vs-input/lib/sample-inputs.yaml \|\| true
	done
	}
	run_tox_test()
	{
	set -e -x
	CURDIR=$(pwd)
	TOXINIS=$(find . -name "tox.ini")
	for TOXINI in "${TOXINIS[@]}"; do
	DIR=$(dirname "$TOXINI")
	cd "${CURDIR}/${DIR}"
	rm -rf ./venv-tox ./.tox
	python3 -m venv ./venv-tox
	source ./venv-tox/bin/activate
	pip3 install pip==9.0.3
	pip3 install --upgrade argparse
	pip3 install tox==2.9.1
	if [ "$RUN_BLACK" = yes ]
	then
	pip3 install black
	python3 -m black --line-length 120 --check .
	fi
	pip3 freeze
	tox
	deactivate
	rm -rf ./venv-tox ./.tox
	done
	}
	build_wagons()
	{
	rm -rf ./*.wgn venv-pkg
	SETUPFILES=$(find . -name "setup.py")

	python3 -m venv ./venv-pkg
	source ./venv-pkg/bin/activate
	pip3 install --upgrade pip
	pip3 install wagon
	CURDIR=$(pwd)
	for SETUPFILE in $SETUPFILES; do
	PLUGIN_DIR=$(dirname "$SETUPFILE")
	PLUGIN_NAME=$(grep 'name' "$SETUPFILE" \| cut -f2 -d'=' \| sed 's/[^0-9a-zA-Z\.]*//g')
	PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" \| cut -f2 -d'=' \| sed 's/[^0-9\.]*//g')
	echo "In $PLUGIN_DIR, build plugin $PLUGIN_NAME, version $PLUGIN_VERSION"
	wagon create -r "${PLUGIN_DIR}/requirements.txt" --format tar.gz "${PLUGIN_DIR}"
	PKG_FILE_NAMES=( "${PLUGIN_NAME}-${PLUGIN_VERSION}"*.wgn )
	echo Built package: "${PKG_FILE_NAMES[@]}"
	cd "$CURDIR"
	done
	deactivate
	rm -rf venv-pkg
	}
	build_archives_for_wagons()
	{
	rm -rf ./.tgz ./.zip venv-pkg

	SETUPFILES=$(find "$(pwd)" -name "setup.py")
	CURDIR=$(pwd)
	for SETUPFILE in $SETUPFILES; do
	PLUGIN_FULL_DIR=$(dirname "$SETUPFILE")
	PLUGIN_BASE_DIR=$(basename "$PLUGIN_FULL_DIR")
	PLUGIN_NAME=$(grep 'name' "$SETUPFILE" \| cut -f2 -d'=' \| sed 's/[^0-9a-zA-Z\.]*//g')
	PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" \| cut -f2 -d'=' \| sed 's/[^0-9\.]*//g')
	cd "${PLUGIN_FULL_DIR}"/..
	echo "In $(pwd), build plugin zip $PLUGIN_NAME, version $PLUGIN_VERSION"
	zip -r "${PLUGIN_NAME}-${PLUGIN_VERSION}.zip" "./${PLUGIN_BASE_DIR}"
	tar -czvf "${PLUGIN_NAME}-${PLUGIN_VERSION}.tgz" "./${PLUGIN_BASE_DIR}"
	echo "Built archives for package ${PLUGIN_NAME}-${PLUGIN_VERSION} at $(pwd)"
	cd "$CURDIR"
	done
	}
	upload_raw_file()
	{
	# Extract the username and password to the nexus repo from the settings file
	USER=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/username/text()" "$SETTINGS_FILE")
	PASS=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/password/text()" "$SETTINGS_FILE")
	NETRC=$(mktemp)
	echo "machine $MVN_RAWREPO_HOST login $USER password $PASS" > "$NETRC"
	REPO="$MVN_RAWREPO_BASEURL_UPLOAD"
	OUTPUT_FILE=$1
	EXT=$(echo "$OUTPUT_FILE" \| rev \|cut -f1 -d '.' \|rev)
	if [ "$EXT" == 'yaml' ]; then
	OUTPUT_FILE_TYPE='text/x-yaml'
	elif [ "$EXT" == 'sh' ]; then
	OUTPUT_FILE_TYPE='text/x-shellscript'
	elif [ "$EXT" == 'gz' ]; then
	OUTPUT_FILE_TYPE='application/gzip'
	elif [ "$EXT" == 'tgz' ]; then
	OUTPUT_FILE_TYPE='application/gzip'
	elif [ "$EXT" == 'zip' ]; then
	OUTPUT_FILE_TYPE='application/zip'
	elif [ "$EXT" == 'wgn' ]; then
	OUTPUT_FILE_TYPE='application/gzip'
	else
	OUTPUT_FILE_TYPE='application/octet-stream'
	fi
	# for multi module projects, the raw repo path must match with project name, not project + module
	# FQDN is project + module
	# GROUPID is project name
	if [ "$MVN_PROJECT_ARTIFACTID" == "$MVN_PROJECT_MODULEID" ]; then
	PROJECT_NAME=${MVN_PROJECT_GROUPID}
	else
	PROJECT_NAME=${FQDN}
	fi
	if [ -z "$RELEASE_TAG" ]; then
	SEND_TO="${REPO}/${PROJECT_NAME}"
	else
	SEND_TO="${REPO}/${PROJECT_NAME}/${RELEASE_TAG}"
	fi

	if [ ! -z "$2" ]; then
	SEND_TO="$SEND_TO/$2"
	fi
	echo "Sending ${OUTPUT_FILE} to Nexus: ${SEND_TO}"
	curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}-${TIMESTAMP}"
	curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}"
	}
	upload_wagon_archives()
	{
	SETUPFILES=$(find "$(pwd)" -name "setup.py")
	CURDIR=$(pwd)
	for SETUPFILE in $SETUPFILES; do
	PLUGIN_FULL_DIR=$(dirname "$SETUPFILE")
	PLUGIN_BASE_DIR=$(basename "$PLUGIN_FULL_DIR")
	PLUGIN_NAME=$(grep 'name' "$SETUPFILE" \| cut -f2 -d'=' \| sed 's/[^0-9a-zA-Z\.]*//g')
	PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" \| cut -f2 -d'=' \| sed 's/[^0-9\.]*//g')
	cd "${PLUGIN_FULL_DIR}"/..
	echo "In $(pwd), upload zip archive for $PLUGIN_NAME, version $PLUGIN_VERSION"
	ARCHIVE_FILE_NAME="${PLUGIN_NAME}-${PLUGIN_VERSION}.zip"
	if [ -z "$ARCHIVE_FILE_NAME" ]; then
	echo "!!! No zip archive file found ${ARCHIVE_FILE_NAME}"
	exit -1
	fi
	upload_raw_file "${ARCHIVE_FILE_NAME}" "${PLUGIN_NAME}/${PLUGIN_VERSION}"
	echo "In $(pwd), upload tgz archive for $PLUGIN_NAME, version $PLUGIN_VERSION"
	ARCHIVE_FILE_NAME="${PLUGIN_NAME}-${PLUGIN_VERSION}.tgz"
	if [ -z "$ARCHIVE_FILE_NAME" ]; then
	echo "!!! No tgz archive file found ${ARCHIVE_FILE_NAME}"
	exit -1
	fi
	upload_raw_file "${ARCHIVE_FILE_NAME}" "${PLUGIN_NAME}/${PLUGIN_VERSION}"
	cd "${CURDIR}"
	done
	}
	upload_wagons_and_type_yamls()
	{
	SETUPFILES=$(find . -name "setup.py")
	CURDIR=$(pwd)
	for SETUPFILE in $SETUPFILES; do
	PLUGIN_DIR=$(dirname "$SETUPFILE")
	PLUGIN_NAME=$(grep 'name' "$SETUPFILE" \| cut -f2 -d'=' \| sed 's/[^0-9a-zA-Z\.]*//g')
	PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" \| cut -f2 -d'=' \| sed 's/[^0-9\.]*//g')
	PLUGIN_VERSION_MAJOR=$(echo "$PLUGIN_VERSION" \| cut -f1 -d'.')
	PLUGIN_VERSION_MAJOR_MINOR=$(echo "$PLUGIN_VERSION" \| cut -f1-2 -d'.')
	echo "Found setup file in $PLUGIN_DIR, for plugin $PLUGIN_NAME version $PLUGIN_VERSION"
	TYPEFILE_NAME=$(grep -R "package_name:[[:space:]]*${PLUGIN_NAME}" \| cut -f1 -d ':')
	if [ -z "$TYPEFILE_NAME" ]; then
	echo "!!! No typefile found with matching package name $PLUGIN_NAME"
	exit -1
	fi
	NEWFILENAME="${PLUGIN_NAME}"_types.yaml
	if [ "$TYPEFILE_NAME" != "$NEWFILENAME" ]; then
	echo "copy typefile to standard naming"
	cp -f "$TYPEFILE_NAME" "$NEWFILENAME"
	fi
	TYPEFILE_PACKAGE_VERSION=$(grep -R 'package_version' "$TYPEFILE_NAME" \|cut -f2 -d ':' \|sed -r 's/\s+//g')
	WAGONFILE_NAME=$(ls -1 "${PLUGIN_NAME}"-"${TYPEFILE_PACKAGE_VERSION}"-*.wgn)
	if [ -z "$WAGONFILE_NAME" ]; then
	echo "!!! No wagonfile found with matching package name and version as required in typefile: "
	echo " $TYPEFILE_NAME plugin $PLUGIN_NAME package version ${TYPEFILE_PACKAGE_VERSION}"
	exit -1
	fi
	upload_raw_file "${NEWFILENAME}" "${PLUGIN_NAME}/${PLUGIN_VERSION}"
	upload_raw_file "${WAGONFILE_NAME}" "${PLUGIN_NAME}/${PLUGIN_VERSION}"

	rm -r "$WAGONFILE_NAME"
	if [ "$TYPEFILE_NAME" != "$NEWFILENAME" ]; then
	rm -f "$NEWFILENAME"
	fi
	done
	}
	upload_files_of_extension()
	{
	FILES=$(ls -1 ./*."$1")
	for F in $FILES ; do
	upload_raw_file "$F" "$2"
	done
	}
	upload_files_of_extension_recursively()
	{
	FILES=$(find . -name "*.$1")
	for F in $FILES ; do
	upload_raw_file "$F" "$2"
	done
	}
	generate_pypirc_then_publish()
	{
	set +x
	USER=$(xpath -e "//servers/server[id='$MVN_PYPISERVER_SERVERID']/username/text()" "$SETTINGS_FILE")
	PASS=$(xpath -e "//servers/server[id='$MVN_PYPISERVER_SERVERID']/password/text()" "$SETTINGS_FILE")
	if [[ "$MVN_PYPISERVER_BASEURL" != */ ]]; then
	MVN_PYPISERVER_BASEURL="${MVN_PYPISERVER_BASEURL}/"
	fi

	cat > ~/.pypirc <<EOL
	[distutils]
	index-servers =
	$MVN_PYPISERVER_SERVERID

	[$MVN_PYPISERVER_SERVERID]
	repository: $MVN_PYPISERVER_BASEURL
	username: $USER
	password: $PASS
	EOL
	# this may fail if a package of same version exists
	python setup.py sdist register -r "$MVN_PYPISERVER_SERVERID" upload -r "$MVN_PYPISERVER_SERVERID"
	set -x
	}
	# following the https://wiki.onap.org/display/DW/Independent+Versioning+and+Release+Process
	#IndependentVersioningandReleaseProcess-StandardizedDockerTagging
	build_and_push_docker()
	{
	# Old tagging
	#IMAGENAME="onap/${FQDN}.${MVN_PROJECT_MODULEID}"
	# new tagging
	ENDID=$(echo $FQDN \| rev \| cut -f1 -d '.' \|rev)
	if [ "$ENDID" == "${MVN_PROJECT_MODULEID}" ]; then
	#IMAGENAME="onap/${FQDN/org.onap./}"
	IMAGENAME="onap/${FQDN}"
	else
	#IMAGENAME="onap/${FQDN/org.onap./}.${MVN_PROJECT_MODULEID}"
	IMAGENAME="onap/${FQDN}.${MVN_PROJECT_MODULEID}"
	fi
	IMAGENAME=$(echo "$IMAGENAME" \| sed -e 's/_$//g' -e 's/\.$//g')
	IMAGENAME=$(echo "$IMAGENAME" \| tr '[:upper:]' '[:lower:]')
	# use the major and minor version of the MVN artifact version as docker image version
	VERSION="${MVN_PROJECT_VERSION//[^0-9.]/}"
	VERSION2=$(echo "$VERSION" \| cut -f1-2 -d'.')
	LFQI="${IMAGENAME}:${VERSION}-${TIMESTAMP}"Z
	# build a docker image
	docker build --rm -f ./Dockerfile -t "${LFQI}" ./
	# all local builds push to SNAPSHOT repo
	REPO=""
	if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then
	REPO=$MVN_DOCKERREGISTRY_SNAPSHOT
	elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then
	REPO=$MVN_DOCKERREGISTRY_SNAPSHOT
	else
	echo "Fail to determine DEPLOYMENT_TYPE"
	REPO=$MVN_DOCKERREGISTRY_SNAPSHOT
	fi
	echo "DEPLOYMENT_TYPE is: $MVN_DEPLOYMENT_TYPE, repo is $REPO"
	if [ ! -z "$REPO" ]; then
	USER=$(xpath -e "//servers/server[id='$REPO']/username/text()" "$SETTINGS_FILE")
	PASS=$(xpath -e "//servers/server[id='$REPO']/password/text()" "$SETTINGS_FILE")
	if [ -z "$USER" ]; then
	echo "Error: no user provided"
	fi
	if [ -z "$PASS" ]; then
	echo "Error: no password provided"
	fi
	[ -z "$PASS" ] && PASS_PROVIDED="<empty>" \|\| PASS_PROVIDED="<password>"
	echo docker login "$REPO" -u "$USER" -p "$PASS_PROVIDED"
	set +x
	docker login "$REPO" -u "$USER" -p "$PASS"
	set -x
	# local tag is imagename:version-timestamp
	OLDTAG="${LFQI}"
	# three tags are pushed:
	# {imagename}:{semver}-SNAPSHOT-{timestamp}Z this is what CIMAN-132 asks
	# {imagename}:{semver} latest of current version, for testing
	# {imagename}:latest latest of all, used mainly by csit
	# LFQI="${IMAGENAME}:${VERSION}-${TIMESTAMP}"Z
	# Updating tags for ${REPO}/${IMAGENAME}:${VERSION} to include STAGING-latest; and adding new tag for major:minor-STAGING-latest
	PUSHTAGS="${REPO}/${IMAGENAME}:${VERSION}-SNAPSHOT-${TIMESTAMP}Z ${REPO}/${IMAGENAME}:${VERSION2}-STAGING-latest ${REPO}/${IMAGENAME}:${VERSION}-STAGING-latest ${REPO}/${IMAGENAME}:latest"
	for NEWTAG in ${PUSHTAGS}
	do
	echo "tagging ${OLDTAG} to ${NEWTAG}"
	docker tag "${OLDTAG}" "${NEWTAG}"
	echo "pushing ${NEWTAG}"
	docker push "${NEWTAG}"
	OLDTAG="${NEWTAG}"
	done
	fi
	}