Updated overview about the Design process and added links
Added the missing picture
Issue-ID: DOC-476
Signed-off-by: andreasgeissler <andreas-geissler@telekom.de>
Change-Id: I59bfbd503d34c495845deb2e5c276e791ec2bb6d
diff --git a/docs/guides/onap-user/design/index.rst b/docs/guides/onap-user/design/index.rst
index 28a808b..6155358 100644
--- a/docs/guides/onap-user/design/index.rst
+++ b/docs/guides/onap-user/design/index.rst
@@ -2,6 +2,8 @@
.. International License. http://creativecommons.org/licenses/by/4.0
.. Copyright 2017 AT&T Intellectual Property. All rights reserved.
+.. _doc_guide_user_des:
+
Design
======
@@ -18,7 +20,81 @@
generates artifacts that are used in other phases of design or when
instantiating or monitoring virtual functions.
-Design includes the following topics:
+The following figure show the different phases and tools involved in
+Onboarding, Design and Distribution process.
+
+|image1|
+
+**The "Core" Design Process includes the following steps:**
+
+* Pre-Onboarding
+ A VNF/PNF Provider delivers VNF descriptor, model and
+ artefacts (e.g. HEAT template), which will be validated
+ and packaged for onboarding to ONAP
+
+* (Resource)-Onboarding
+ In the SDC a License Model is created, the VNF/PNF package imported
+ and a Vendor Software Product (VSP) is created
+
+* VF Creation and Testing
+ A V(N)F, PNF or CR Model is created (a) import of a VSP or VFC
+ (b) manual creation and import of artefacts created via external
+ tools like the Controller Design Studio (CDS), responsible for the
+ Controller Blueprint Design
+ The created VF will pass a testing workflow to be used
+ in a Service Model
+
+* Service Design
+ A Service Model is created as a composition of resources
+ (e.g. V(N)Fs, PNFs,...), Policies, Workflows,...
+ The created Service Model will pass a testing workflow and
+ handed over to a Governance Approval and Distribution process
+
+* Governance Approval and Distribution
+ The Service Provider will have a specific set of policies and
+ procedures for approving Services and deploying them in the
+ Runtime Service Catalog
+
+**The optional/additional Design steps are:**
+
+* Controller Blueprint Design
+ The Controller Blueprint is the overall service design, fully model-driven,
+ intent based package needed for self service provisioning and configuration
+ management automation. The framework to automate the resolution of resources
+ for instantiation and any config provisioning operation,
+ such as day0, day1 or day2 configuration.
+ It provides a tool called Controller Design Studio
+
+* Policy Design
+ The Policy Creation component deals with policies.
+ These are rules, conditions, requirements, constraints, attributes,
+ or needs that must be provided, maintained, and/or enforced.
+ At a lower level, Policy involves machine-readable rules enabling
+ actions to be taken based on triggers or requests.
+
+* APPC Controller Design
+ APPC Controller Design Tool (CDT) is used for self-service onboarding of
+ VNF’s. VNF owners can create templates and other artifacts for APPC
+ Configure command (used to apply a post-instantiation configuration)
+ as well as other life cycle commands.
+
+* Workflow Design
+ The purpose of the Workflow Designer is to enable designers to define or
+ modify workflows to support Service/Resource change management scenarios
+ executed by the Service Orchestrator.
+
+* Control Loop Design
+ This phase includes the Design of a closed loop template and associate it
+ to a Service. The template represents the theoretical flow of the CL.
+ It generates a deployment artifact that can be ingested by the DCAE in
+ order to create the needed DCAE microservices in runtime.
+ The design is done in the SDC DCAE-DS (Design Studio).
+ The DCAE Design Studio enables to define and configure
+ the monitoring flows of DCAE.
+ The configuration and deployment of a Control Loop will be done with
+ Control Loop Automation Management (CLAMP) tool.
+
+The follwing sections will focus on the different Design steps:
.. toctree::
:maxdepth: 1
@@ -34,8 +110,21 @@
Governance Approval and Service Distribution <./service-distribution/index.rst>
- Control Loop Design <./control-loop/index.rst>
+ Controller Blueprint Design <../../../submodules/ccsdk/cds.git/docs/index.rst>
-* `Policy Design <https://wiki.onap.org/x/SYAP>`_
+ Policy Design <../../../submodules/policy/parent.git/docs/design/design.rst>
-* `SDC Artifacts List <https://wiki.onap.org/x/LYAP>`_
+ APPC Controller Design <../../../submodules/appc.git/docs/APPC CDT Guide/APPC CDT Guide.rst>
+
+ Workflow Design <../../../submodules/sdc.git/docs/workflow.rst>
+
+ Control Loop Design <../../../submodules/sdc.git/docs/dcaedesigner.rst>
+
+ Control Loop Automation Management <../../../submodules/clamp.git/docs/index.rst>
+
+
+
+.. |image1| image:: media/Design-Overview.png
+
+
+
diff --git a/docs/guides/onap-user/design/media/Design-Overview.png b/docs/guides/onap-user/design/media/Design-Overview.png
new file mode 100644
index 0000000..f94724e
--- /dev/null
+++ b/docs/guides/onap-user/design/media/Design-Overview.png
Binary files differ
