diff --git a/docs/guides/onap-developer/how-to-use-docs/addendum.rst b/docs/guides/onap-developer/how-to-use-docs/addendum.rst
deleted file mode 100644
index e3b209c..0000000
--- a/docs/guides/onap-developer/how-to-use-docs/addendum.rst
+++ /dev/null
@@ -1,158 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0
-.. International License. http://creativecommons.org/licenses/by/4.0
-
-Addendum
-========
-
-Index File
-----------
-
-The index file must relatively reference your other rst files in that directory.
-
-Here is an example index.rst :
-
-.. code-block:: bash
-
-    *******************
-    Documentation Title
-    *******************
-
-    .. toctree::
-       :numbered:
-       :maxdepth: 2
-
-       documentation-example
-
-Source Files
-------------
-
-Document source files have to be written in reStructuredText format (rst).
-Each file would be built as an html page.
-
-Here is an example source rst file :
-
-.. code-block:: bash
-
-    =============
-    Chapter Title
-    =============
-
-    Section Title
-    =============
-
-    Subsection Title
-    ----------------
-
-    Hello!
-
-Writing RST Markdown
---------------------
-
-See http://sphinx-doc.org/rest.html .
-
-**Hint:**
-You can add html content that only appears in html output by using the
-'only' directive with build type
-('html' and 'singlehtml') for an ONAP document. But, this is not encouraged.
-
-.. code-block:: bash
-
-    .. only:: html
-        This line will be shown only in html version.
-
-
-Creating Indices
-----------------
-
-Building an index for your Sphinx project is relatively simple. First, tell Sphinx that
-you want it to build an index by adding something like this after your TOC tree:
-
-.. code-block:: rst
-
-    Indices and Search
-    ==================
-    
-    * :ref:`genindex`
-    * :ref:`search`
-
-**Hint:**
-Note that search was included here. It works out of the box with any Sphinx project, so you
-don't need to do anything except include a reference to it in your :code:`index.rst` file.
-
-Now, to generate a index entry in your RST, do one of the following:
-
-.. code-block:: rst
-
-   Some content that requires an :index:`index`.
-
-or
-
-.. code-block:: rst
-
-    .. index::
-        single: myterm
-    
-    Some header containing myterm
-    =============================
-
-In the second case, Sphinx will create a link in the index to the paragraph that follows
-the index entry declaration.
-
-When your project is built, Sphinx will generate an index page populated with the entries
-you created in the source RST.
-
-These are simple cases with simple options. For more information about indexing with Sphinx,
-please see the `official Sphinx documentation <http://www.sphinx-doc.org/en/stable/markup/misc.html>`_.
-
-
-Jenkins Jobs
-------------
-
-Verify Job
-++++++++++
-
-The verify job name is **doc-{stream}-verify-rtd**
-
-Proposed changes in files in any repository with top level docs folder
-in the repository and RST files in below this folder
-will be verified by this job as part of a gerrit code review.
-
-.. Important::
-   The contributing author and every reviewer on a gerrit code review
-   should always review the Jenkins log before approving and merging a
-   change.  The log review should include:
-   
-   * Using a browser or other editor to search for a pattern in the
-     *console log* that matches files in the patch set.  This will quickly
-     identify errors and warnings that are related to the patch set and
-     repository being changed.
-   
-   * Using a browser to click on the *html* folder included in the log
-     and preview how the proposed changes will look when published at
-     Read The Docs. Small changes can be easily made in the patch set.
-
-Merge Job
-+++++++++
-
-The merge job name is **doc-{stream}-merge-rtd**.
-
-When a committer merges a patch that includes files matching the
-path described above, the doc project merge job will trigger an
-update at readthedocs.  There may be some delay after the merge job
-completes until new version appears at Read The Docs.
-
-Read The Docs URLs
-------------------
-
-When referencing versions of documentation a Read The Docs the following
-URL conventions should be used
-
- +----------------------------------+----------------------------------------+
- | URL                              | To Refer to                            |
- +==================================+========================================+
- | docs.onap.org                    | Most recent approved named release     |
- +----------------------------------+----------------------------------------+
- | docs.onap.org/en/latest          | Latest master branch all projects      |
- +----------------------------------+----------------------------------------+
- | docs.onap.org/en/*named release* | An approved name release eg. amsterdam |
- +----------------------------------+----------------------------------------+
diff --git a/docs/guides/onap-developer/how-to-use-docs/index.rst b/docs/guides/onap-developer/how-to-use-docs/index.rst
index 2e7e47a..3c65f33 100644
--- a/docs/guides/onap-developer/how-to-use-docs/index.rst
+++ b/docs/guides/onap-developer/how-to-use-docs/index.rst
@@ -14,7 +14,6 @@
    api-swagger-guide
    templates
    converting-to-rst
-   addendum
 
 .. toctree::
    :hidden:
diff --git a/docs/guides/onap-developer/how-to-use-docs/introduction.rst b/docs/guides/onap-developer/how-to-use-docs/introduction.rst
index 250313f..242a2d2 100644
--- a/docs/guides/onap-developer/how-to-use-docs/introduction.rst
+++ b/docs/guides/onap-developer/how-to-use-docs/introduction.rst
@@ -208,3 +208,19 @@
 When there are subsequent, significant contributions to a source file
 from a different contributor, a new copyright line may be appended
 after the last existing copyright line.
+
+Read The Docs URLs
+------------------
+
+When referencing versions of documentation a Read The Docs the following
+URL conventions should be used
+
+ +----------------------------------+----------------------------------------+
+ | URL                              | To Refer to                            |
+ +==================================+========================================+
+ | docs.onap.org                    | Most recent approved named release     |
+ +----------------------------------+----------------------------------------+
+ | docs.onap.org/en/latest          | Latest master branch all projects      |
+ +----------------------------------+----------------------------------------+
+ | docs.onap.org/en/*named release* | An approved name release eg. amsterdam |
+ +----------------------------------+----------------------------------------+
diff --git a/docs/guides/onap-developer/how-to-use-docs/setting-up.rst b/docs/guides/onap-developer/how-to-use-docs/setting-up.rst
index 509e7af..789cf0b 100644
--- a/docs/guides/onap-developer/how-to-use-docs/setting-up.rst
+++ b/docs/guides/onap-developer/how-to-use-docs/setting-up.rst
@@ -409,6 +409,143 @@
 the labels with the project name to help share the label space, e.g.,
 ``sfc-user-guide`` instead of just ``user-guide``.
 
+Index File
+----------
+
+The index file must relatively reference your other rst files in that directory.
+
+Here is an example index.rst :
+
+.. code-block:: bash
+
+    *******************
+    Documentation Title
+    *******************
+
+    .. toctree::
+       :numbered:
+       :maxdepth: 2
+
+       documentation-example
+
+Source Files
+------------
+
+Document source files have to be written in reStructuredText format (rst).
+Each file would be built as an html page.
+
+Here is an example source rst file :
+
+.. code-block:: bash
+
+    =============
+    Chapter Title
+    =============
+
+    Section Title
+    =============
+
+    Subsection Title
+    ----------------
+
+    Hello!
+
+Writing RST Markdown
+--------------------
+
+See http://sphinx-doc.org/rest.html .
+
+**Hint:**
+You can add html content that only appears in html output by using the
+'only' directive with build type
+('html' and 'singlehtml') for an ONAP document. But, this is not encouraged.
+
+.. code-block:: bash
+
+    .. only:: html
+        This line will be shown only in html version.
+
+
+Creating Indices
+----------------
+
+Building an index for your Sphinx project is relatively simple. First, tell Sphinx that
+you want it to build an index by adding something like this after your TOC tree:
+
+.. code-block:: rst
+
+    Indices and Search
+    ==================
+
+    * :ref:`genindex`
+    * :ref:`search`
+
+**Hint:**
+Note that search was included here. It works out of the box with any Sphinx project, so you
+don't need to do anything except include a reference to it in your :code:`index.rst` file.
+
+Now, to generate a index entry in your RST, do one of the following:
+
+.. code-block:: rst
+
+   Some content that requires an :index:`index`.
+
+or
+
+.. code-block:: rst
+
+    .. index::
+        single: myterm
+
+    Some header containing myterm
+    =============================
+
+In the second case, Sphinx will create a link in the index to the paragraph that follows
+the index entry declaration.
+
+When your project is built, Sphinx will generate an index page populated with the entries
+you created in the source RST.
+
+These are simple cases with simple options. For more information about indexing with Sphinx,
+please see the `official Sphinx documentation <http://www.sphinx-doc.org/en/stable/markup/misc.html>`_.
+
+
+Jenkins Jobs
+------------
+
+Verify Job
+++++++++++
+
+The verify job name is **doc-{stream}-verify-rtd**
+
+Proposed changes in files in any repository with top level docs folder
+in the repository and RST files in below this folder
+will be verified by this job as part of a gerrit code review.
+
+.. Important::
+   The contributing author and every reviewer on a gerrit code review
+   should always review the Jenkins log before approving and merging a
+   change.  The log review should include:
+
+   * Using a browser or other editor to search for a pattern in the
+     *console log* that matches files in the patch set.  This will quickly
+     identify errors and warnings that are related to the patch set and
+     repository being changed.
+
+   * Using a browser to click on the *html* folder included in the log
+     and preview how the proposed changes will look when published at
+     Read The Docs. Small changes can be easily made in the patch set.
+
+Merge Job
++++++++++
+
+The merge job name is **doc-{stream}-merge-rtd**.
+
+When a committer merges a patch that includes files matching the
+path described above, the doc project merge job will trigger an
+update at readthedocs.  There may be some delay after the merge job
+completes until new version appears at Read The Docs.
+
 Testing
 =======