[INT] Adding deployments scripts for ONAP on AKS
Patch 2 - updating readme and removing dash character from BUILD parameter
Patch 3 - updating image url to amd instead of arm, fixing NFS os disk parameter
Issue-ID: INT-1270
Signed-off-by: stark, steven <steven.stark@att.com>
Change-Id: I1d8824b3c098855c9094e27fad8c820e4df42677
diff --git a/deployment/aks/post-install/bootstrap.sh b/deployment/aks/post-install/bootstrap.sh
new file mode 100755
index 0000000..646a502
--- /dev/null
+++ b/deployment/aks/post-install/bootstrap.sh
@@ -0,0 +1,176 @@
+#!/bin/bash
+# Copyright 2019 AT&T Intellectual Property. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" >/dev/null 2>&1 && pwd )"
+
+set -x
+
+if [ ! -d $BUILD_DIR ]; then
+ mkdir -p $BUILD_DIR
+fi
+
+# TODO
+# Get these from values.yaml
+export AAI_DNS_NAME=aai.onap
+export AAI_PORT=8443
+export AAI_USER=AAI
+export AAI_PASS=AAI
+export AAI_PROTOCOL=https
+export VID_DNS_NAME=vid.onap
+export VID_PORT=8443
+export VID_PROTOCOL=https
+export SDC_DNS_NAME=sdc-fe.onap
+export SDC_PORT=9443
+export SDC_PROTOCOL=https
+
+DATA_FILE=$BUILD_DIR"/get_tenant_id.json"
+
+cat > $DATA_FILE <<EOF
+{ "auth": {
+ "identity": {
+ "methods": ["password"],
+ "password": {
+ "user": {
+ "name": "$OPENSTACK_USER",
+ "domain": { "id": "default" },
+ "password": "$OPENSTACK_PASS"
+ }
+ }
+ },
+ "scope": {
+ "project": {
+ "name": "$OPENSTACK_TENANT",
+ "domain": { "id": "default" }
+ }
+ }
+ }
+}
+EOF
+
+http_code=""
+COUNTER=0
+
+until [ "$http_code" = "201" ] || [ $COUNTER -gt 360 ]; do
+http_code=`curl -sL -w "%{http_code}" -o /dev/null -H "Content-Type: application/json" -d @"$DATA_FILE" "http://$OPENSTACK_IP/identity/v3/auth/tokens"`
+echo ""
+echo "http_code $http_code"
+COUNTER=$((COUNTER +1))
+sleep 10
+done
+
+TENANT_ID=`curl -s -H "Content-Type: application/json" -d @"$DATA_FILE" "http://$OPENSTACK_IP/identity/v3/auth/tokens" | jq --raw-output '.token.project.id'`
+
+if [ $? -ne 0 ]; then
+ echo "Failure getting tenant ID from openstack, exiting..."
+ exit 1
+fi
+
+export TENANT_ID=$TENANT_ID
+
+URI="aai/util/echo?action=long"
+http_code=""
+COUNTER=0
+
+until [ "$http_code" = "200" ] || [ $COUNTER -gt 180 ]; do
+echo "performing aai healthcheck..."
+http_code=`curl -sL -w "%{http_code}" -o /dev/null -I --insecure -u $AAI_USER:$AAI_PASS -X GET "$AAI_PROTOCOL://$AAI_DNS_NAME:$AAI_PORT/$URI" \
+ -H 'X-TransactionId: 9999' \
+ -H 'X-FromAppId: jimmy-postman' \
+ -H 'Real-Time: true' \
+ -H 'Cache-Control: no-cache'`
+COUNTER=$((COUNTER +1))
+sleep 10
+done
+
+if [ "$http_code" != "200" ]; then
+ echo "AAI Healthcheck unsuccessful :("
+ echo "Something went wrong during the ONAP installation."
+ exit 1
+fi
+
+echo "Creating CLLI $CLLI..."
+$DIR/create_clli.sh
+
+echo "Creating Cloud Region $CLOUD_REGION..."
+$DIR/create_cloud_region.sh
+
+echo "Creating Cloud Region Relationship..."
+$DIR/create_cloud_region_relationship.sh
+
+echo "Creating Cloud Customer $CUSTOMER..."
+$DIR/create_customer.sh
+
+echo "Creating Cloud Service Type $SERVICE_TYPE..."
+$DIR/create_service_type.sh
+
+echo "Creating Subscription..."
+$DIR/create_subscription.sh
+
+echo "Creating Subscription Relationship..."
+$DIR/create_cloud_region_subscriber_relationship.sh
+
+echo "Creating Availability Zone $AZ..."
+$DIR/create_az.sh
+
+
+URI="vid/healthCheck"
+http_code=""
+COUNTER=0
+
+until [ "$http_code" = "200" ] || [ $COUNTER -gt 180 ]; do
+echo "performing vid healthcheck..."
+http_code=`curl -sL -w "%{http_code}" -o /dev/null --insecure -I -X GET "$VID_PROTOCOL://$VID_DNS_NAME:$VID_PORT/$URI"`
+COUNTER=$((COUNTER +1))
+sleep 10
+done
+
+if [ "$http_code" != "200" ]; then
+ echo "VID Healthcheck unsuccessful :("
+ echo "Something went wrong during the ONAP installation."
+ exit 1
+fi
+
+echo "Creating Owning Entity $OE..."
+$DIR/create_owning_entity.sh
+
+echo "Creating Platform $PLATFORM..."
+$DIR/create_platform.sh
+
+echo "Creating Project $PROJECT..."
+$DIR/create_project.sh
+
+echo "Creating LOB $LOB..."
+$DIR/create_lob.sh
+
+echo "Creating Cloud Site..."
+$DIR/create_cloud_site.sh
+
+URI="sdc1/rest/healthCheck"
+http_code=""
+COUNTER=0
+
+until [ "$http_code" = "200" ] || [ $COUNTER -gt 180 ]; do
+echo "performing sdc healthcheck..."
+http_code=`curl -k -sL -w "%{http_code}" -o /dev/null -I -X GET "$SDC_PROTOCOL://$SDC_DNS_NAME:$SDC_PORT/$URI"`
+COUNTER=$((COUNTER +1))
+sleep 10
+done
+
+if [ "$http_code" != "200" ]; then
+ echo "SDC Healthcheck unsuccessful :("
+ echo "Something went wrong during the ONAP installation."
+ exit 1
+fi
+