Move CSIT to integration/csit repo
To facilite branching of CSIT tests, all CSIT test
code and scripts are relocated to the integration/csit
repo.
Change-Id: I1e4c0eff44691f73f8098b3c52764107f6b8b8df
Issue-ID: INT-671
Signed-off-by: Gary Wu <gary.i.wu@huawei.com>
diff --git a/plans/sdnc/healthcheck/health_check.sh b/plans/sdnc/healthcheck/health_check.sh
new file mode 100644
index 0000000..e8b5056
--- /dev/null
+++ b/plans/sdnc/healthcheck/health_check.sh
@@ -0,0 +1,30 @@
+#!/usr/bin/env bash
+###############################################################################
+# Copyright 2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+###############################################################################
+SCRIPTS="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
+echo $SCRIPTS
+
+unset http_proxy https_proxy
+
+response=$(curl --write-out '%{http_code}' --silent --output /dev/null -H "Authorization: Basic YWRtaW46S3A4Yko0U1hzek0wV1hsaGFrM2VIbGNzZTJnQXc4NHZhb0dHbUp2VXkyVQ==" -X POST -H "X-FromAppId: csit-sdnc" -H "X-TransactionId: csit-sdnc" -H "Accept: application/json" -H "Content-Type: application/json" http://localhost:8282/restconf/operations/SLI-API:healthcheck )
+
+if [ "$response" == "200" ]; then
+ echo "SDNC health check passed."
+ exit 0;
+fi
+
+echo "SDNC health check failed with response code ${response}."
+exit 1
diff --git a/plans/sdnc/healthcheck/setup.sh b/plans/sdnc/healthcheck/setup.sh
new file mode 100644
index 0000000..991ba18
--- /dev/null
+++ b/plans/sdnc/healthcheck/setup.sh
@@ -0,0 +1,139 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2017 AT&T Intellectual Property
+#
+# Place the scripts in run order:
+SCRIPTS="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
+source ${WORKSPACE}/test/csit/scripts/sdnc/script1.sh
+
+export NEXUS_USERNAME=docker
+export NEXUS_PASSWD=docker
+export NEXUS_DOCKER_REPO=nexus3.onap.org:10001
+export DMAAP_TOPIC=AUTO
+export DOCKER_IMAGE_VERSION=1.4-STAGING-latest
+export CCSDK_DOCKER_IMAGE_VERSION=0.3-STAGING-latest
+
+export MTU=$(/sbin/ifconfig | grep MTU | sed 's/.*MTU://' | sed 's/ .*//' | sort -n | head -1)
+
+if [ "$MTU" == "" ]; then
+ export MTU="1450"
+fi
+
+
+# Clone SDNC repo to get docker-compose for SDNC
+mkdir -p $WORKSPACE/archives/sdnc
+cd $WORKSPACE/archives
+git clone -b master --single-branch --depth=1 http://gerrit.onap.org/r/sdnc/oam.git sdnc
+cd $WORKSPACE/archives/sdnc
+git pull
+unset http_proxy https_proxy
+cd $WORKSPACE/archives/sdnc/installation/src/main/yaml
+
+sed -i "s/DMAAP_TOPIC_ENV=.*/DMAAP_TOPIC_ENV="AUTO"/g" docker-compose.yml
+docker login -u $NEXUS_USERNAME -p $NEXUS_PASSWD $NEXUS_DOCKER_REPO
+
+docker pull $NEXUS_DOCKER_REPO/onap/sdnc-image:$DOCKER_IMAGE_VERSION
+docker tag $NEXUS_DOCKER_REPO/onap/sdnc-image:$DOCKER_IMAGE_VERSION onap/sdnc-image:latest
+
+docker pull $NEXUS_DOCKER_REPO/onap/sdnc-ansible-server-image:$DOCKER_IMAGE_VERSION
+docker tag $NEXUS_DOCKER_REPO/onap/sdnc-ansible-server-image:$DOCKER_IMAGE_VERSION onap/sdnc-ansible-server-image:latest
+
+docker pull $NEXUS_DOCKER_REPO/onap/ccsdk-dgbuilder-image:$CCSDK_DOCKER_IMAGE_VERSION
+docker tag $NEXUS_DOCKER_REPO/onap/ccsdk-dgbuilder-image:$CCSDK_DOCKER_IMAGE_VERSION onap/ccsdk-dgbuilder-image:latest
+
+docker pull $NEXUS_DOCKER_REPO/onap/admportal-sdnc-image:$DOCKER_IMAGE_VERSION
+docker tag $NEXUS_DOCKER_REPO/onap/admportal-sdnc-image:$DOCKER_IMAGE_VERSION onap/admportal-sdnc-image:latest
+
+docker pull $NEXUS_DOCKER_REPO/onap/sdnc-ueb-listener-image:$DOCKER_IMAGE_VERSION
+docker tag $NEXUS_DOCKER_REPO/onap/sdnc-ueb-listener-image:$DOCKER_IMAGE_VERSION onap/sdnc-ueb-listener-image:latest
+
+docker pull $NEXUS_DOCKER_REPO/onap/sdnc-dmaap-listener-image:$DOCKER_IMAGE_VERSION
+
+docker tag $NEXUS_DOCKER_REPO/onap/sdnc-dmaap-listener-image:$DOCKER_IMAGE_VERSION onap/sdnc-dmaap-listener-image:latest
+
+
+# start SDNC containers with docker compose and configuration from docker-compose.yml
+docker-compose up -d
+
+# WAIT 10 minutes maximum and test every 5 seconds if SDNC is up using HealthCheck API
+TIME_OUT=1000
+INTERVAL=30
+TIME=0
+while [ "$TIME" -lt "$TIME_OUT" ]; do
+ response=$(curl --write-out '%{http_code}' --silent --output /dev/null -H "Authorization: Basic YWRtaW46S3A4Yko0U1hzek0wV1hsaGFrM2VIbGNzZTJnQXc4NHZhb0dHbUp2VXkyVQ==" -X POST -H "X-FromAppId: csit-sdnc" -H "X-TransactionId: csit-sdnc" -H "Accept: application/json" -H "Content-Type: application/json" http://localhost:8282/restconf/operations/SLI-API:healthcheck ); echo $response
+
+ if [ "$response" == "200" ]; then
+ echo SDNC started in $TIME seconds
+ break;
+ fi
+
+ echo Sleep: $INTERVAL seconds before testing if SDNC is up. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds
+ sleep $INTERVAL
+ TIME=$(($TIME+$INTERVAL))
+done
+
+if [ "$TIME" -ge "$TIME_OUT" ]; then
+ echo TIME OUT: Docker containers not started in $TIME_OUT seconds... Could cause problems for testing activities...
+fi
+
+#sleep 800
+
+TIME_OUT=1500
+INTERVAL=60
+TIME=0
+while [ "$TIME" -lt "$TIME_OUT" ]; do
+
+docker exec sdnc_controller_container rm -f /opt/opendaylight/current/etc/host.key
+response=$(docker exec sdnc_controller_container /opt/opendaylight/current/bin/client system:start-level)
+docker exec sdnc_controller_container rm -f /opt/opendaylight/current/etc/host.key
+num_bundles=$(docker exec sdnc_controller_container /opt/opendaylight/current/bin/client bundle:list | tail -1 | cut -d\| -f1)
+
+ if [ "$response" == "Level 100" ] && [ "$num_bundles" -ge 333 ]; then
+ echo SDNC karaf started in $TIME seconds
+ break;
+ fi
+
+ echo Sleep: $INTERVAL seconds before testing if SDNC is up. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds
+ sleep $INTERVAL
+ TIME=$(($TIME+$INTERVAL))
+done
+
+if [ "$TIME" -ge "$TIME_OUT" ]; then
+ echo TIME OUT: karaf session not started in $TIME_OUT seconds... Could cause problems for testing activities...
+fi
+
+response=$(docker exec sdnc_controller_container /opt/opendaylight/current/bin/client system:start-level)
+num_bundles=$(docker exec sdnc_controller_container /opt/opendaylight/current/bin/client bundle:list | tail -1 | cut -d\| -f1)
+
+ if [ "$response" == "Level 100" ] && [ "$num_bundles" -ge 333 ]; then
+ num_bundles=$(docker exec sdnc_controller_container /opt/opendaylight/current/bin/client bundle:list | tail -1 | cut -d\| -f1)
+ num_failed_bundles=$(docker exec sdnc_controller_container /opt/opendaylight/current/bin/client bundle:list | grep Failure | wc -l)
+ failed_bundles=$(docker exec sdnc_controller_container /opt/opendaylight/current/bin/client bundle:list | grep Failure)
+ echo There is/are $num_failed_bundles failed bundles out of $num_bundles installed bundles.
+ fi
+
+if [ "$num_failed_bundles" -ge 1 ]; then
+ echo "The following bundle(s) are in a failed state: "
+ echo " $failed_bundles"
+fi
+
+# Sleep additional 5 minutes (300 secs) to give application time to finish
+sleep 300
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v SCRIPTS:${SCRIPTS}"
+
diff --git a/plans/sdnc/healthcheck/teardown.sh b/plans/sdnc/healthcheck/teardown.sh
new file mode 100644
index 0000000..dd465bb
--- /dev/null
+++ b/plans/sdnc/healthcheck/teardown.sh
@@ -0,0 +1,27 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2017 AT&T Intellectual Property
+#
+
+kill-instance.sh sdnc_controller_container
+kill-instance.sh sdnc_dgbuilder_container
+kill-instance.sh sdnc_portal_container
+kill-instance.sh sdnc_db_container
+kill-instance.sh sdnc_ueblistener_container
+kill-instance.sh sdnc_dmaaplistener_container
+
+# $WORKSPACE/archives/appc deleted with archives folder when tests starts so we keep it at the end for debugging
diff --git a/plans/sdnc/healthcheck/testplan.txt b/plans/sdnc/healthcheck/testplan.txt
new file mode 100644
index 0000000..3fa8dde
--- /dev/null
+++ b/plans/sdnc/healthcheck/testplan.txt
@@ -0,0 +1,4 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+sdnc/healthcheck
+