Merge "Changes due to DFC file name revert"
diff --git a/plans/usecases/5G-bulkpm/composefile/docker-compose-e2e.yml b/plans/usecases/5G-bulkpm/composefile/docker-compose-e2e.yml
index f3c47bb..4f6c4da 100644
--- a/plans/usecases/5G-bulkpm/composefile/docker-compose-e2e.yml
+++ b/plans/usecases/5G-bulkpm/composefile/docker-compose-e2e.yml
@@ -20,6 +20,8 @@
interval: 10s
timeout: 10s
retries: 5
+ extra_hosts:
+ - "dmaap-dr-node:1.1.1.1"
datarouter-node:
image: nexus3.onap.org:10001/onap/dmaap/datarouter-node:2.0.2-SNAPSHOT-latest
@@ -33,6 +35,8 @@
depends_on:
datarouter-prov:
condition: service_healthy
+ extra_hosts:
+ - "dmaap-dr-prov:2.2.2.2"
datarouter-subscriber:
image: nexus3.onap.org:10001/onap/dmaap/datarouter-subscriber:2.0.2-SNAPSHOT-latest
@@ -90,18 +94,4 @@
container_name: cbs
image: nexus3.onap.org:10001/onap/org.onap.dcaegen2.platform.configbinding.app-app:latest
environment:
- CONSUL_HOST:
-
- buscontroller:
- container_name: buscontroller
- image: nexus3.onap.org:10001/onap/dmaap/dmaap-bc:latest
- ports:
- - "18080:8080"
- - "18443:8443"
- extra_hosts:
- - "dmaap-dr-prov:DMAAPDR"
- - "message-router:DMAAPMR"
- volumes:
- - /tmp/docker-databus-controller.conf:/opt/app/config/conf
- depends_on:
- - datarouter-prov
+ CONSUL_HOST:
\ No newline at end of file
diff --git a/plans/usecases/5G-bulkpm/setup.sh b/plans/usecases/5G-bulkpm/setup.sh
index 3d3a9ef..5d99b1c 100644
--- a/plans/usecases/5G-bulkpm/setup.sh
+++ b/plans/usecases/5G-bulkpm/setup.sh
@@ -76,10 +76,9 @@
docker login -u docker -p docker nexus3.onap.org:10001
docker-compose up -d
echo "Disregard the message ERROR: for datarouter-node Container 1234456 is unhealthy, this is expected behaiour at this stage"
-docker kill datarouter-prov
-docker kill datarouter-node
docker kill vescollector
docker kill cbs
+sleep 10
CONSUL_IP=$(docker inspect '--format={{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' consul )
sed -i -e '/CONSUL_HOST:/ s/:.*/: '$CONSUL_IP'/' docker-compose.yml
HOST_IP=$(ip route get 8.8.8.8 | awk '/8.8.8.8/ {print $NF}')
@@ -87,6 +86,23 @@
MARIADB=$(docker inspect '--format={{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' mariadb )
sed -i 's/datarouter-mariadb/'$MARIADB'/g' $WORKSPACE/archives/dmaapdr/datarouter/datarouter-docker-compose/src/main/resources/prov_data/provserver.properties
docker-compose up -d
+sleep 5
+# Get IP address of datarrouger-prov, datarouter-node, fileconsumer-node.
+DR_PROV_IP=$(docker inspect -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' datarouter-prov)
+DR_NODE_IP=$(docker inspect -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' datarouter-node)
+DR_SUBSCIBER_IP=$(docker inspect -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' fileconsumer-node)
+DR_GATEWAY_IP=$(docker inspect -f '{{range .NetworkSettings.Networks}}{{.Gateway}}{{end}}' datarouter-prov)
+
+echo DR_PROV_IP=${DR_PROV_IP}
+echo DR_NODE_IP=${DR_NODE_IP}
+echo DR_GATEWAY_IP=${DR_GATEWAY_IP}
+echo DR_SUBSCIBER_IP=${DR_SUBSCIBER_IP}
+
+docker kill datarouter-node
+docker kill datarouter-prov
+sed -i 's/1.1.1.1/'$DR_NODE_IP'/g' docker-compose.yml
+sed -i 's/2.2.2.2/'$DR_PROV_IP'/g' docker-compose.yml
+docker-compose up -d
# Wait for initialization of Docker container for datarouter-node, datarouter-prov and mariadb
for i in {1..10}; do
@@ -103,23 +119,12 @@
done
sleep 5
-# Get IP address of datarrouger-prov, datarouter-node, fileconsumer-node.
-DR_PROV_IP=$(docker inspect -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' datarouter-prov)
-DR_NODE_IP=$(docker inspect -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' datarouter-node)
-DR_SUBSCIBER_IP=$(docker inspect -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' fileconsumer-node)
-DR_GATEWAY_IP=$(docker inspect -f '{{range .NetworkSettings.Networks}}{{.Gateway}}{{end}}' datarouter-prov)
-
-echo DR_PROV_IP=${DR_PROV_IP}
-echo DR_NODE_IP=${DR_NODE_IP}
-echo DR_GATEWAY_IP=${DR_GATEWAY_IP}
-echo DR_SUBSCIBER_IP=${DR_SUBSCIBER_IP}
docker exec -i datarouter-prov sh -c "curl -k -X PUT https://$DR_PROV_IP:8443/internal/api/NODES?val=dmaap-dr-node\|$DR_GATEWAY_IP"
docker exec -i datarouter-prov sh -c "curl -k -X PUT https://$DR_PROV_IP:8443/internal/api/PROV_AUTH_ADDRESSES?val=dmaap-dr-prov\|$DR_GATEWAY_IP"
-docker exec datarouter-prov /bin/sh -c "echo '${DR_NODE_IP}' dmaap-dr-node >> /etc/hosts"
-docker exec datarouter-node /bin/sh -c "echo '${DR_PROV_IP}' dmaap-dr-prov >> /etc/hosts"
docker exec datarouter-node /bin/sh -c "echo '${DR_SUBSCIBER_IP}' dmaap-dr-subscriber >> /etc/hosts"
+
# Get IP address of DMAAP, KAFKA, Zookeeper
DMAAP_MR_IP=$(docker inspect --format='{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' $DMAAP)
KAFKA_IP=$(docker inspect --format='{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' $KAFKA)
@@ -131,11 +136,6 @@
export HOST_IP=${HOST_IP}
export DMAAP_MR_IP=${DMAAP_MR_IP}
-docker kill buscontroller
-sed -i 's/DMAAPDR/'$DR_PROV_IP'/g' docker-compose.yml
-sed -i 's/DMAAPMR/'$DMAAP_MR_IP'/g' docker-compose.yml
-docker-compose up -d
-sed -i 's/DMAAPDR/'$DR_PROV_IP'/g' /tmp/docker-databus-controller.conf
# Data File Collector configuration :
sed -i 's/DR_NODE_IP/'$DR_NODE_IP'/g' docker-compose.yml
@@ -156,13 +156,12 @@
docker restart dfc
sleep 2
-# Wait for initialization of Docker container for datarouter-node, datarouter-prov and mariadb, Consul, CBS, Buscontroller
+# Wait for initialization of Docker container for datarouter-node, datarouter-prov and mariadb, Consul, CBS
for i in {1..10}; do
if [ $(docker inspect --format '{{ .State.Running }}' consul) ] && \
- [ $(docker inspect --format '{{ .State.Running }}' cbs) ] && \
- [ $(docker inspect --format '{{ .State.Running }}' buscontroller) ]
+ [ $(docker inspect --format '{{ .State.Running }}' cbs) ]
then
- echo "Data Router, Consul, Config Binding Service, Buscontroller Services Running"
+ echo "Data Router, Consul, Config Binding Service Services Running"
break
else
echo sleep $i
diff --git a/plans/usecases/5G-bulkpm/teardown.sh b/plans/usecases/5G-bulkpm/teardown.sh
index 7a99941..78de759 100644
--- a/plans/usecases/5G-bulkpm/teardown.sh
+++ b/plans/usecases/5G-bulkpm/teardown.sh
@@ -15,5 +15,4 @@
kill-instance.sh dfc
kill-instance.sh sftp
kill-instance.sh cbs
-kill-instance.sh consul
-kill-instance.sh buscontroller
\ No newline at end of file
+kill-instance.sh consul
\ No newline at end of file
diff --git a/tests/usecases/5G-bulkpm/BulkpmE2E.robot b/tests/usecases/5G-bulkpm/BulkpmE2E.robot
index f8ba0fb..dcf9721 100644
--- a/tests/usecases/5G-bulkpm/BulkpmE2E.robot
+++ b/tests/usecases/5G-bulkpm/BulkpmE2E.robot
@@ -20,9 +20,9 @@
${CLI_EXEC_CLI_FILECONSUMER} docker exec fileconsumer-node /bin/sh -c "ls /opt/app/subscriber/delivery | grep .xml"
${CLI_EXEC_CLI_DFC_LOG} docker exec dfc /bin/sh -c "cat /var/log/ONAP/application.log" > /tmp/dfc_docker.log.robot
${CLI_EXEC_CLI_DFC_LOG_GREP} grep "Publish to DR successful!" /tmp/dfc_docker.log.robot
+${CLI_EXEC_CLI_FILECONSUMER_CP} docker cp fileconsumer-node:/opt/app/subscriber/delivery/xNF.pm.xml.M %{WORKSPACE}
+${CLI_EXEC_RENAME_METADATA} mv %{WORKSPACE}/xNF.pm.xml.M %{WORKSPACE}/metadata.json
-${CLI_EXEC_CLI_FILECONSUMER_CP} docker cp fileconsumer-node:/opt/app/subscriber/delivery/oteNB5309_xNF.pm.xml.M %{WORKSPACE}
-${CLI_EXEC_RENAME_METADATA} mv %{WORKSPACE}/oteNB5309_xNF.pm.xml.M %{WORKSPACE}/metadata.json
${metadataSchemaPath} %{WORKSPACE}/tests/usecases/5G-bulkpm/assets/metadata.schema.json
${metadataJsonPath} %{WORKSPACE}/metadata.json
@@ -86,7 +86,7 @@
${cli_cmd_output}= Run Process ${CLI_EXEC_CLI_FILECONSUMER} shell=yes
Log ${cli_cmd_output.stdout}
Should Be Equal As Strings ${cli_cmd_output.rc} 0
- Should Contain ${cli_cmd_output.stdout} oteNB5309_xNF.pm.xml
+ Should Contain ${cli_cmd_output.stdout} xNF.pm.xml
Verify File Consumer Receive valid metadata from Data Router
[Tags] Bulk_PM_E2E_06
@@ -94,7 +94,7 @@
${cli_cmd_output}= Run Process ${CLI_EXEC_CLI_FILECONSUMER} shell=yes
Log ${cli_cmd_output.stdout}
Should Be Equal As Strings ${cli_cmd_output.rc} 0
- Should Contain ${cli_cmd_output.stdout} oteNB5309_xNF.pm.xml.M
+ Should Contain ${cli_cmd_output.stdout} xNF.pm.xml.M
${cli_cmd_output}= Run Process ${CLI_EXEC_CLI_FILECONSUMER_CP} shell=yes
${cli_cmd_output}= Run Process ${CLI_EXEC_RENAME_METADATA} shell=yes
${validation_result}= Validate ${metadataSchemaPath} ${metadataJsonPath}