Updating ElasticSearch version to 6.1.2
Setting the correct image path
Adding config files
Updating elasticsearch yml config for 6.1.2
Change-Id: I1795d2c4201657377cc06f5fb6914ed5b93f3c24
Issue-ID: AAI-1440
Signed-off-by: Edwin Lawrance <Edwin.Lawrance@amdocs.com>
diff --git a/kubernetes/aai/charts/aai-elasticsearch/resources/config/elasticsearch.yml b/kubernetes/aai/charts/aai-elasticsearch/resources/config/elasticsearch.yml
index 3f3c109..24b3c5a 100644
--- a/kubernetes/aai/charts/aai-elasticsearch/resources/config/elasticsearch.yml
+++ b/kubernetes/aai/charts/aai-elasticsearch/resources/config/elasticsearch.yml
@@ -80,11 +80,11 @@
# Set the number of shards (splits) of an index (5 by default):
-index.number_of_shards: 5
+#index.number_of_shards: 5
# Set the number of replicas (additional copies) of an index (1 by default):
-index.number_of_replicas: 1
+#index.number_of_replicas: 1
# These settings directly affect the performance of index and search operations
# in your cluster. Assuming you have enough machines to hold shards and
@@ -116,13 +116,13 @@
# Path to directory where to store index data allocated for this node.
# Use swm auto link to redirect the data directory if necessary.
-#path.data: /opt/app/elasticsearch/data
+path.data: /usr/share/elasticsearch/data
# path.data: /path/to/data1,/path/to/data2
# path.work: /path/to/work
-#path.logs: /opt/app/elasticsearch/logs
+path.logs: /usr/share/elasticsearch/logs
#path.plugins: /opt/app/elasticsearch/plugins
@@ -141,7 +141,7 @@
#
# Set this property to true to lock the memory: default is true
-bootstrap.mlockall: true
+#bootstrap.memory_lock: true
# Make sure that the ES_MIN_MEM and ES_MAX_MEM environment variables are set
# to the same value, and that the machine has enough memory to allocate
@@ -150,6 +150,28 @@
# You should also make sure that the Elasticsearch process is allowed to lock
# the memory, eg. by using `ulimit -l unlimited`.
+### Kernel Settings
+
+# Elasticsearch installs system call filters of various flavors depending on the
+# operating system (e.g., seccomp on Linux). These system call filters are
+# installed to prevent the ability to execute system calls related to forking
+# as a defense mechanism against arbitrary code execution attacks on
+# Elasticsearch The system call filter check ensures that if system call
+# filters are enabled, then they were successfully installed. To pass the system
+# call filter check you must either fix any configuration errors on your system
+# that prevented system call filters from installing (check your logs), or at
+# your own risk disable system call filters by setting
+# bootstrap.system_call_filter to false.
+# See: https://www.elastic.co/guide/en/elasticsearch/reference/current/system-call-filter-check.html
+#
+# seccomp is found in Linux kernels: 2.6.372.6.39, 3.03.19, 4.04.9,
+# 4.10-rc+HEAD
+#
+# The default setting is to disable the filters assuming an older kernel
+# version where seccomp is not available.
+# See: https://discuss.elastic.co/t/elasticsearch-warn-unable-to-install-syscall-filter/42819
+
+bootstrap.system_call_filter: false
############################## Network And HTTP ###############################
# Elasticsearch, by default, binds itself to the 0.0.0.0 address, and listens
@@ -252,7 +274,7 @@
# recovering a shard from a peer:
#
# indices.recovery.concurrent_streams: 5
-indices.recovery.concurrent_streams: 5
+#indices.recovery.concurrent_streams: 5
################################## Discovery ##################################
@@ -269,8 +291,8 @@
# Set this option to a higher value on a slow or congested network
# to minimize discovery failures:
#
-# discovery.zen.ping.timeout: 3s
-discovery.zen.ping.timeout:
+# discovery.zen.ping_timeout: 3s
+discovery.zen.ping_timeout: 3s
# For more information, see
# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/modules-discovery-zen.html>
@@ -281,7 +303,7 @@
#
# 1. Disable multicast discovery (enabled by default):
# discovery.zen.ping.multicast.enabled: false
-discovery.zen.ping.multicast.enabled: false
+#discovery.zen.ping.multicast.enabled: false
# 2. Configure an initial list of master nodes in the cluster
@@ -413,3 +435,11 @@
#####################################################
#X#security.manager.enabled: false
#X#searchguard.authcz.admin_dn:
+
+#####################################################
+##### X-Pack Configuration
+#####################################################
+xpack.security.enabled: false
+xpack.ml.enabled: false
+xpack.monitoring.enabled: false
+xpack.watcher.enabled: false
diff --git a/kubernetes/aai/charts/aai-elasticsearch/resources/config/jvm.options b/kubernetes/aai/charts/aai-elasticsearch/resources/config/jvm.options
new file mode 100644
index 0000000..e69d798
--- /dev/null
+++ b/kubernetes/aai/charts/aai-elasticsearch/resources/config/jvm.options
@@ -0,0 +1,117 @@
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+## JVM configuration
+
+################################################################
+## IMPORTANT: JVM heap size
+################################################################
+##
+## You should always set the min and max JVM heap
+## size to the same value. For example, to set
+## the heap to 4 GB, set:
+##
+## -Xms4g
+## -Xmx4g
+##
+## See https://www.elastic.co/guide/en/elasticsearch/reference/current/heap-size.html
+## for more information
+##
+################################################################
+
+# Xms represents the initial size of total heap space
+# Xmx represents the maximum size of total heap space
+
+-Xms1g
+-Xmx1g
+
+################################################################
+## Expert settings
+################################################################
+##
+## All settings below this section are considered
+## expert settings. Don't tamper with them unless
+## you understand what you are doing
+##
+################################################################
+
+## GC configuration
+-XX:+UseConcMarkSweepGC
+-XX:CMSInitiatingOccupancyFraction=75
+-XX:+UseCMSInitiatingOccupancyOnly
+
+## optimizations
+
+# pre-touch memory pages used by the JVM during initialization
+-XX:+AlwaysPreTouch
+
+## basic
+
+# force the server VM
+-server
+
+# explicitly set the stack size
+-Xss1m
+
+# set to headless, just in case
+-Djava.awt.headless=true
+
+# ensure UTF-8 encoding by default (e.g. filenames)
+-Dfile.encoding=UTF-8
+
+# use our provided JNA always versus the system one
+-Djna.nosys=true
+
+# turn off a JDK optimization that throws away stack traces for common
+# exceptions because stack traces are important for debugging
+-XX:-OmitStackTraceInFastThrow
+
+# flags to configure Netty
+-Dio.netty.noUnsafe=true
+-Dio.netty.noKeySetOptimization=true
+-Dio.netty.recycler.maxCapacityPerThread=0
+
+# log4j 2
+-Dlog4j.shutdownHookEnabled=false
+-Dlog4j2.disable.jmx=true
+
+## heap dumps
+
+# generate a heap dump when an allocation from the Java heap fails
+# heap dumps are created in the working directory of the JVM
+-XX:+HeapDumpOnOutOfMemoryError
+
+# specify an alternative path for heap dumps
+# ensure the directory exists and has sufficient space
+#-XX:HeapDumpPath=/heap/dump/path
+
+## GC logging
+
+#-XX:+PrintGCDetails
+#-XX:+PrintGCTimeStamps
+#-XX:+PrintGCDateStamps
+#-XX:+PrintClassHistogram
+#-XX:+PrintTenuringDistribution
+#-XX:+PrintGCApplicationStoppedTime
+
+# log GC status to a file with time stamps
+# ensure the directory exists
+#-Xloggc:${loggc}
+
+# By default, the GC log file will not rotate.
+# By uncommenting the lines below, the GC log file
+# will be rotated every 128MB at most 32 times.
+#-XX:+UseGCLogFileRotation
+#-XX:NumberOfGCLogFiles=32
+#-XX:GCLogFileSize=128M
diff --git a/kubernetes/aai/charts/aai-elasticsearch/resources/config/log4j2.properties b/kubernetes/aai/charts/aai-elasticsearch/resources/config/log4j2.properties
new file mode 100644
index 0000000..e674865
--- /dev/null
+++ b/kubernetes/aai/charts/aai-elasticsearch/resources/config/log4j2.properties
@@ -0,0 +1,88 @@
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+status = error
+
+# log action execution errors for easier debugging
+logger.action.name = org.elasticsearch.action
+logger.action.level = INFO
+
+appender.console.type = Console
+appender.console.name = console
+appender.console.layout.type = PatternLayout
+appender.console.layout.pattern = [%d{ISO8601}][%-5p][%-25c{1.}] %marker%m%n
+
+appender.rolling.type = RollingFile
+appender.rolling.name = rolling
+appender.rolling.fileName = ${sys:es.logs.base_path}.log
+appender.rolling.layout.type = PatternLayout
+appender.rolling.layout.pattern = [%d{ISO8601}][%-5p][%-25c{1.}] %marker%.10000m%n
+appender.rolling.filePattern = ${sys:es.logs.base_path}-%d{yyyy-MM-dd}.log
+appender.rolling.policies.type = Policies
+appender.rolling.policies.time.type = TimeBasedTriggeringPolicy
+appender.rolling.policies.time.interval = 1
+appender.rolling.policies.time.modulate = true
+
+rootLogger.level = info
+rootLogger.appenderRef.console.ref = console
+rootLogger.appenderRef.rolling.ref = rolling
+
+# appender.deprecation_rolling.type = RollingFile
+# appender.deprecation_rolling.name = deprecation_rolling
+# appender.deprecation_rolling.fileName = ${sys:es.logs.base_path}_deprecation.log
+# appender.deprecation_rolling.layout.type = PatternLayout
+# appender.deprecation_rolling.layout.pattern = [%d{ISO8601}][%-5p][%-25c{1.}] %marker%.10000m%n
+# appender.deprecation_rolling.filePattern = ${sys:es.logs.base_path}_deprecation-%i.log.gz
+# appender.deprecation_rolling.policies.type = Policies
+# appender.deprecation_rolling.policies.size.type = SizeBasedTriggeringPolicy
+# appender.deprecation_rolling.policies.size.size = 1GB
+# appender.deprecation_rolling.strategy.type = DefaultRolloverStrategy
+# appender.deprecation_rolling.strategy.max = 4
+
+# logger.deprecation.name = org.elasticsearch.deprecation
+# logger.deprecation.level = warn
+# logger.deprecation.appenderRef.deprecation_rolling.ref = deprecation_rolling
+# logger.deprecation.additivity = false
+
+appender.index_search_slowlog_rolling.type = RollingFile
+appender.index_search_slowlog_rolling.name = index_search_slowlog_rolling
+appender.index_search_slowlog_rolling.fileName = ${sys:es.logs.base_path}_index_search_slowlog.log
+appender.index_search_slowlog_rolling.layout.type = PatternLayout
+appender.index_search_slowlog_rolling.layout.pattern = [%d{ISO8601}][%-5p][%-25c] %marker%.10000m%n
+appender.index_search_slowlog_rolling.filePattern = ${sys:es.logs.base_path}_index_search_slowlog-%d{yyyy-MM-dd}.log
+appender.index_search_slowlog_rolling.policies.type = Policies
+appender.index_search_slowlog_rolling.policies.time.type = TimeBasedTriggeringPolicy
+appender.index_search_slowlog_rolling.policies.time.interval = 1
+appender.index_search_slowlog_rolling.policies.time.modulate = true
+
+logger.index_search_slowlog_rolling.name = index.search.slowlog
+logger.index_search_slowlog_rolling.level = trace
+logger.index_search_slowlog_rolling.appenderRef.index_search_slowlog_rolling.ref = index_search_slowlog_rolling
+logger.index_search_slowlog_rolling.additivity = false
+
+appender.index_indexing_slowlog_rolling.type = RollingFile
+appender.index_indexing_slowlog_rolling.name = index_indexing_slowlog_rolling
+appender.index_indexing_slowlog_rolling.fileName = ${sys:es.logs.base_path}_index_indexing_slowlog.log
+appender.index_indexing_slowlog_rolling.layout.type = PatternLayout
+appender.index_indexing_slowlog_rolling.layout.pattern = [%d{ISO8601}][%-5p][%-25c] %marker%.10000m%n
+appender.index_indexing_slowlog_rolling.filePattern = ${sys:es.logs.base_path}_index_indexing_slowlog-%d{yyyy-MM-dd}.log
+appender.index_indexing_slowlog_rolling.policies.type = Policies
+appender.index_indexing_slowlog_rolling.policies.time.type = TimeBasedTriggeringPolicy
+appender.index_indexing_slowlog_rolling.policies.time.interval = 1
+appender.index_indexing_slowlog_rolling.policies.time.modulate = true
+
+logger.index_indexing_slowlog.name = index.indexing.slowlog.index
+logger.index_indexing_slowlog.level = trace
+logger.index_indexing_slowlog.appenderRef.index_indexing_slowlog_rolling.ref = index_indexing_slowlog_rolling
+logger.index_indexing_slowlog.additivity = false
diff --git a/kubernetes/aai/charts/aai-elasticsearch/templates/configmap.yaml b/kubernetes/aai/charts/aai-elasticsearch/templates/configmap.yaml
index 4fe634c..c60b8f2 100644
--- a/kubernetes/aai/charts/aai-elasticsearch/templates/configmap.yaml
+++ b/kubernetes/aai/charts/aai-elasticsearch/templates/configmap.yaml
@@ -25,5 +25,5 @@
release: {{ .Release.Name }}
heritage: {{ .Release.Service }}
data:
-{{ tpl (.Files.Glob "resources/config/elasticsearch.yml").AsConfig . | indent 2 }}
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
#{{ end }}
diff --git a/kubernetes/aai/charts/aai-elasticsearch/templates/deployment.yaml b/kubernetes/aai/charts/aai-elasticsearch/templates/deployment.yaml
index a6c93b8..24cdb92 100644
--- a/kubernetes/aai/charts/aai-elasticsearch/templates/deployment.yaml
+++ b/kubernetes/aai/charts/aai-elasticsearch/templates/deployment.yaml
@@ -39,9 +39,10 @@
- /bin/sh
- -c
- |
- mkdir -p /logroot/elasticsearch/es-data
- chmod -R 777 /logroot/elasticsearch/es-data
- chown -R root:root /logroot
+ mkdir -p /logroot/elasticsearch/logs
+ mkdir -p /logroot/elasticsearch/data
+ chmod -R 777 /logroot/elasticsearch
+ chown -R 1000:1000 /logroot
env:
- name: NAMESPACE
valueFrom:
@@ -59,7 +60,7 @@
hostname: {{ include "common.name" . }}
containers:
- name: {{ include "common.name" . }}
- image: {{ .Values.global.dockerhubRepository | default .Values.dockerhubRepository }}/{{ .Values.image }}
+ image: {{ .Values.global.loggingRepository | default .Values.loggingRepository }}/{{ .Values.image }}
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
ports:
- containerPort: {{ .Values.service.internalPort }}
@@ -84,6 +85,12 @@
- name: elasticsearch-config
subPath: elasticsearch.yml
mountPath: /usr/share/elasticsearch/config/elasticsearch.yml
+ - name: elasticsearch-config
+ subPath: jvm.options
+ mountPath: /usr/share/elasticsearch/config/jvm.options
+ - name: elasticsearch-config
+ subPath: log4j2.properties
+ mountPath: /usr/share/elasticsearch/config/log4j2.properties
- name: elasticsearch-data
mountPath: /usr/share/elasticsearch/data
resources:
diff --git a/kubernetes/aai/charts/aai-elasticsearch/values.yaml b/kubernetes/aai/charts/aai-elasticsearch/values.yaml
index a800c4e..8eb4d27 100644
--- a/kubernetes/aai/charts/aai-elasticsearch/values.yaml
+++ b/kubernetes/aai/charts/aai-elasticsearch/values.yaml
@@ -19,8 +19,8 @@
nodePortPrefix: 302
# application image
-dockerhubRepository: docker.io
-image: elasticsearch:2.4.1
+loggingRepository: docker.elastic.co
+image: elasticsearch/elasticsearch:6.1.2
pullPolicy: Always
flavor: small