Activity-Spec support in OOM - Casablanca Release
Activity spec support for OOM deployment via K8S
Change-Id: Iba4a2c6ff2eaf0c435b93ac7d47261f86d3dfdc1
Issue-ID: SDC-1048
Signed-off-by: priyanshua <pagarwal@amdocs.com>
diff --git a/kubernetes/sdc/charts/sdc-act/templates/NOTES.txt b/kubernetes/sdc/charts/sdc-act/templates/NOTES.txt
new file mode 100644
index 0000000..41f9706
--- /dev/null
+++ b/kubernetes/sdc/charts/sdc-act/templates/NOTES.txt
@@ -0,0 +1,33 @@
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/sdc/charts/sdc-act/templates/configmap.yaml b/kubernetes/sdc/charts/sdc-act/templates/configmap.yaml
new file mode 100644
index 0000000..4ccc7cc
--- /dev/null
+++ b/kubernetes/sdc/charts/sdc-act/templates/configmap.yaml
@@ -0,0 +1,21 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
\ No newline at end of file
diff --git a/kubernetes/sdc/charts/sdc-act/templates/deployment.yaml b/kubernetes/sdc/charts/sdc-act/templates/deployment.yaml
new file mode 100644
index 0000000..542982f
--- /dev/null
+++ b/kubernetes/sdc/charts/sdc-act/templates/deployment.yaml
@@ -0,0 +1,80 @@
+# Copyright © 2017 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - name: {{ include "common.name" . }}-job-completion
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: "{{ .Values.global.pullPolicy | default .Values.pullPolicy }}"
+ command:
+ - /root/job_complete.py
+ args:
+ - --job-name
+ - {{ include "common.fullname" . }}-init-activity-spec
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{ if .Values.liveness.enabled }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end }}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ - name: JAVA_OPTIONS
+ value: {{ .Values.config.javaOptions }}
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-config
+ mountPath: /etc/onap/activity-spec/be/config
+ volumes:
+ - name: {{ include "common.fullname" . }}-config
+ configMap:
+ name : {{ include "common.fullname" . }}-configmap
+ defaultMode: 0755
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
\ No newline at end of file
diff --git a/kubernetes/sdc/charts/sdc-act/templates/job.yaml b/kubernetes/sdc/charts/sdc-act/templates/job.yaml
new file mode 100644
index 0000000..bd9d9d1
--- /dev/null
+++ b/kubernetes/sdc/charts/sdc-act/templates/job.yaml
@@ -0,0 +1,64 @@
+# Copyright © 2017 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: batch/v1
+kind: Job
+metadata:
+ name: {{ include "common.fullname" . }}-init-activity-spec
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}-job
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ backoffLimit: 20
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}-job
+ release: {{ .Release.Name }}
+ spec:
+ restartPolicy: Never
+ initContainers:
+ - name: {{ include "common.name" . }}-init-readiness
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - sdc-cs
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ containers:
+ - name: {{ include "common.name" . }}-job
+ image: "{{ include "common.repository" . }}/{{ .Values.configInitImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ env:
+ - name: CS_HOST
+ value: sdc-cs
+ - name: CS_USER
+ valueFrom:
+ secretKeyRef: {name: {{ .Release.Name }}-sdc-cs-secrets, key: sdc_user}
+ - name: CS_PASSWORD
+ valueFrom:
+ secretKeyRef: {name: {{ .Release.Name }}-sdc-cs-secrets, key: sdc_password}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
+ restartPolicy: Never
diff --git a/kubernetes/sdc/charts/sdc-act/templates/service.yaml b/kubernetes/sdc/charts/sdc-act/templates/service.yaml
new file mode 100644
index 0000000..736ef74
--- /dev/null
+++ b/kubernetes/sdc/charts/sdc-act/templates/service.yaml
@@ -0,0 +1,39 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName | default "http" }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName | default "http" }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
\ No newline at end of file