[DMAAP] Remove AAF dependency
Remove DMaaP NodePorts
Update dmaap-bc postgres setup and dbc-client image used by DCAE
Use the http port of the dbcClient in the dmaapProvisioning job
Signed-off-by: efiacor <fiachra.corcoran@est.tech>
Change-Id: Ie4888b58b6f7e1405ed67625900da89e58b5cb79
Issue-ID: DMAAP-1573
diff --git a/kubernetes/dmaap/components/dmaap-bc/resources/log/logback.xml b/kubernetes/dmaap/components/dmaap-bc/resources/log/logback.xml
new file mode 100644
index 0000000..a827b09
--- /dev/null
+++ b/kubernetes/dmaap/components/dmaap-bc/resources/log/logback.xml
@@ -0,0 +1,346 @@
+
+<!--
+ ============LICENSE_START==========================================
+ org.onap.dmaap
+ ===================================================================
+ Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+ ===================================================================
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+ ============LICENSE_END============================================
+ ECOMP is a trademark and service mark of AT&T Intellectual Property.
+-->
+
+<configuration scan="false" scanPeriod="3 seconds">
+ <!--<jmxConfigurator /> -->
+ <!-- directory path for all other type logs -->
+ <property name="logDir" value="logs" />
+ <!-- specify the component name -->
+ <property name="componentName" value="ONAP"/>
+
+ <!-- log file names -->
+ <property name="generalLogName" value="application" />
+ <property name="securityLogName" value="security" />
+ <property name="performanceLogName" value="performance" />
+ <property name="serverLogName" value="server" />
+ <property name="policyLogName" value="policy" />
+ <property name="errorLogName" value="error" />
+ <property name="metricsLogName" value="metrics" />
+ <property name="auditLogName" value="audit" />
+ <property name="debugLogName" value="debug" />
+
+ <property name="defaultPattern" value="%date{ISO8601,UTC}|%X{RequestId}|%X{ServiceInstanceId}|%thread|%X{VirtualServerName}|%X{ServiceName}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Timer}|%msg%n" />
+
+ <property name="auditLoggerPattern" value="%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n" />
+ <property name="metricsLoggerPattern" value="%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{TargetVirtualEntity}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n" />
+ <property name="errorLoggerPattern" value="%date{ISO8601,UTC}|%X{RequestId}|%thread|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%.-5level|%X{ErrorCode}|%X{ErrorDescription}|%msg%n" />
+ <property name="debugLoggerPattern" value="%date{ISO8601,UTC}|%X{RequestId}|%thread|%msg%n" />
+
+ <property name="logDirectory" value="${logDir}/${componentName}" />
+
+ <!-- Example evaluator filter applied against console appender -->
+ <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
+ <encoder>
+ <pattern>${defaultPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <!-- ============================================================================ -->
+ <!-- EELF Appenders -->
+ <!-- ============================================================================ -->
+
+ <!-- The EELFAppender is used to record events to the general application
+ log -->
+
+
+ <appender name="EELF"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${generalLogName}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <fileNamePattern>${logDirectory}/${generalLogName}.%i.log.zip
+ </fileNamePattern>
+ <minIndex>1</minIndex>
+ <maxIndex>9</maxIndex>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>50MB</maxFileSize>
+ </triggeringPolicy>
+ <encoder>
+ <pattern>${defaultPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="asyncEELF" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="EELF" />
+ </appender>
+
+ <!-- EELF Security Appender. This appender is used to record security events
+ to the security log file. Security events are separate from other loggers
+ in EELF so that security log records can be captured and managed in a secure
+ way separate from the other logs. This appender is set to never discard any
+ events. -->
+ <appender name="EELFSecurity"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${securityLogName}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <fileNamePattern>${logDirectory}/${securityLogName}.%i.log.zip
+ </fileNamePattern>
+ <minIndex>1</minIndex>
+ <maxIndex>9</maxIndex>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>50MB</maxFileSize>
+ </triggeringPolicy>
+ <encoder>
+ <pattern>${defaultPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="asyncEELFSecurity" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <discardingThreshold>0</discardingThreshold>
+ <appender-ref ref="EELFSecurity" />
+ </appender>
+
+ <!-- EELF Performance Appender. This appender is used to record performance
+ records. -->
+ <appender name="EELFPerformance"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${performanceLogName}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <fileNamePattern>${logDirectory}/${performanceLogName}.%i.log.zip
+ </fileNamePattern>
+ <minIndex>1</minIndex>
+ <maxIndex>9</maxIndex>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>50MB</maxFileSize>
+ </triggeringPolicy>
+ <encoder>
+ <pattern>${defaultPattern}</pattern>
+ </encoder>
+ </appender>
+ <appender name="asyncEELFPerformance" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="EELFPerformance" />
+ </appender>
+
+ <!-- EELF Server Appender. This appender is used to record Server related
+ logging events. The Server logger and appender are specializations of the
+ EELF application root logger and appender. This can be used to segregate Server
+ events from other components, or it can be eliminated to record these events
+ as part of the application root log. -->
+ <appender name="EELFServer"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${serverLogName}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <fileNamePattern>${logDirectory}/${serverLogName}.%i.log.zip
+ </fileNamePattern>
+ <minIndex>1</minIndex>
+ <maxIndex>9</maxIndex>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>50MB</maxFileSize>
+ </triggeringPolicy>
+ <encoder>
+ <pattern>${defaultPattern}</pattern>
+ </encoder>
+ </appender>
+ <appender name="asyncEELFServer" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="EELFServer" />
+ </appender>
+
+
+ <!-- EELF Policy Appender. This appender is used to record Policy engine
+ related logging events. The Policy logger and appender are specializations
+ of the EELF application root logger and appender. This can be used to segregate
+ Policy engine events from other components, or it can be eliminated to record
+ these events as part of the application root log. -->
+ <appender name="EELFPolicy"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${policyLogName}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <fileNamePattern>${logDirectory}/${policyLogName}.%i.log.zip
+ </fileNamePattern>
+ <minIndex>1</minIndex>
+ <maxIndex>9</maxIndex>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>50MB</maxFileSize>
+ </triggeringPolicy>
+ <encoder>
+ <pattern>${defaultPattern}</pattern>
+ </encoder>
+ </appender>
+ <appender name="asyncEELFPolicy" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="EELFPolicy" />
+ </appender>
+
+
+ <!-- EELF Audit Appender. This appender is used to record audit engine
+ related logging events. The audit logger and appender are specializations
+ of the EELF application root logger and appender. This can be used to segregate
+ Policy engine events from other components, or it can be eliminated to record
+ these events as part of the application root log. -->
+
+ <appender name="EELFAudit"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${auditLogName}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <fileNamePattern>${logDirectory}/${auditLogName}.%i.log.zip
+ </fileNamePattern>
+ <minIndex>1</minIndex>
+ <maxIndex>9</maxIndex>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>50MB</maxFileSize>
+ </triggeringPolicy>
+ <encoder>
+ <pattern>${auditLoggerPattern}</pattern>
+ </encoder>
+ </appender>
+ <appender name="asyncEELFAudit" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="EELFAudit" />
+ </appender>
+
+<appender name="EELFMetrics"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${metricsLogName}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <fileNamePattern>${logDirectory}/${metricsLogName}.%i.log.zip
+ </fileNamePattern>
+ <minIndex>1</minIndex>
+ <maxIndex>9</maxIndex>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>50MB</maxFileSize>
+ </triggeringPolicy>
+ <encoder>
+ <pattern>${metricsLoggerPattern}</pattern>
+ </encoder>
+ </appender>
+
+
+ <appender name="asyncEELFMetrics" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="EELFMetrics"/>
+ </appender>
+
+ <appender name="EELFError"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${errorLogName}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <fileNamePattern>${logDirectory}/${errorLogName}.%i.log.zip
+ </fileNamePattern>
+ <minIndex>1</minIndex>
+ <maxIndex>9</maxIndex>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>50MB</maxFileSize>
+ </triggeringPolicy>
+ <encoder>
+ <pattern>${errorLoggerPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="asyncEELFError" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="EELFError"/>
+ </appender>
+
+ <appender name="EELFDebug"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${debugLogName}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <fileNamePattern>${logDirectory}/${debugLogName}.%i.log.zip
+ </fileNamePattern>
+ <minIndex>1</minIndex>
+ <maxIndex>9</maxIndex>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>50MB</maxFileSize>
+ </triggeringPolicy>
+ <encoder>
+ <pattern>${debugLoggerPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="asyncEELFDebug" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="EELFDebug" />
+ <includeCallerData>true</includeCallerData>
+ </appender>
+
+
+ <!-- ============================================================================ -->
+ <!-- EELF loggers -->
+ <!-- ============================================================================ -->
+ <logger name="com.att.eelf" level="info" additivity="false">
+ <appender-ref ref="asyncEELF" />
+ </logger>
+ <logger name="com.att.eelf.security" level="info" additivity="false">
+ <appender-ref ref="asyncEELFSecurity" />
+ </logger>
+ <logger name="com.att.eelf.perf" level="info" additivity="false">
+ <appender-ref ref="asyncEELFPerformance" />
+ </logger>
+ <logger name="com.att.eelf.server" level="info" additivity="false">
+ <appender-ref ref="asyncEELFServer" />
+ </logger>
+ <logger name="com.att.eelf.policy" level="info" additivity="false">
+ <appender-ref ref="asyncEELFPolicy" />
+ </logger>
+
+ <logger name="com.att.eelf.audit" level="info" additivity="false">
+ <appender-ref ref="asyncEELFAudit" />
+ </logger>
+
+ <logger name="com.att.eelf.metrics" level="info" additivity="false">
+ <appender-ref ref="asyncEELFMetrics" />
+ </logger>
+
+
+ <logger name="com.att.eelf.error" level="error" additivity="false">
+ <appender-ref ref="asyncEELFError" />
+ </logger>
+
+ <logger name="com.att.eelf.debug" level="debug" additivity="false">
+ <appender-ref ref="asyncEELFDebug" />
+ </logger>
+
+ <root level="ERROR">
+ <appender-ref ref="asyncEELF" />
+ <appender-ref ref="STDOUT" />
+ </root>
+</configuration>